diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/ppc/platforms/4xx/ocotea.h | 94 |
1 files changed, 0 insertions, 94 deletions
diff --git a/arch/ppc/platforms/4xx/ocotea.h b/arch/ppc/platforms/4xx/ocotea.h deleted file mode 100644 index 89730ce2322c..000000000000 --- a/arch/ppc/platforms/4xx/ocotea.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Ocotea board definitions - * - * Matt Porter <mporter@kernel.crashing.org> - * - * Copyright 2003-2005 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifdef __KERNEL__ -#ifndef __ASM_OCOTEA_H__ -#define __ASM_OCOTEA_H__ - -#include <platforms/4xx/ibm440gx.h> - -/* F/W TLB mapping used in bootloader glue to reset EMAC */ -#define PPC44x_EMAC0_MR0 0xe0000800 - -/* Location of MAC addresses in PIBS image */ -#define PIBS_FLASH_BASE 0xfff00000 -#define PIBS_MAC_BASE (PIBS_FLASH_BASE+0xb0500) -#define PIBS_MAC_SIZE 0x200 -#define PIBS_MAC_OFFSET 0x100 - -/* External timer clock frequency */ -#define OCOTEA_TMR_CLK 25000000 - -/* RTC/NVRAM location */ -#define OCOTEA_RTC_ADDR 0x0000000148000000ULL -#define OCOTEA_RTC_SIZE 0x2000 - -/* Flash */ -#define OCOTEA_FPGA_REG_0 0x0000000148300000ULL -#define OCOTEA_BOOT_LARGE_FLASH(x) (x & 0x40) -#define OCOTEA_SMALL_FLASH_LOW 0x00000001ff900000ULL -#define OCOTEA_SMALL_FLASH_HIGH 0x00000001fff00000ULL -#define OCOTEA_SMALL_FLASH_SIZE 0x100000 -#define OCOTEA_LARGE_FLASH_LOW 0x00000001ff800000ULL -#define OCOTEA_LARGE_FLASH_HIGH 0x00000001ffc00000ULL -#define OCOTEA_LARGE_FLASH_SIZE 0x400000 - -/* FPGA_REG_3 (Ethernet Groups) */ -#define OCOTEA_FPGA_REG_3 0x0000000148300003ULL - -/* - * Serial port defines - */ -#define RS_TABLE_SIZE 2 - -#if defined(__BOOTER__) -/* OpenBIOS defined UART mappings, used by bootloader shim */ -#define UART0_IO_BASE 0xE0000200 -#define UART1_IO_BASE 0xE0000300 -#else -/* head_44x.S created UART mapping, used before early_serial_setup. - * We cannot use default OpenBIOS UART mappings because they - * don't work for configurations with more than 512M RAM. --ebs - */ -#define UART0_IO_BASE 0xF0000200 -#define UART1_IO_BASE 0xF0000300 -#endif - -#define BASE_BAUD 11059200/16 -#define STD_UART_OP(num) \ - { 0, BASE_BAUD, 0, UART##num##_INT, \ - (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ - iomem_base: (void*)UART##num##_IO_BASE, \ - io_type: SERIAL_IO_MEM}, - -#define SERIAL_PORT_DFNS \ - STD_UART_OP(0) \ - STD_UART_OP(1) - -/* PCI support */ -#define OCOTEA_PCI_LOWER_IO 0x00000000 -#define OCOTEA_PCI_UPPER_IO 0x0000ffff -#define OCOTEA_PCI_LOWER_MEM 0x80000000 -#define OCOTEA_PCI_UPPER_MEM 0xffffefff - -#define OCOTEA_PCI_CFGREGS_BASE 0x000000020ec00000ULL -#define OCOTEA_PCI_CFGA_PLB32 0x0ec00000 -#define OCOTEA_PCI_CFGD_PLB32 0x0ec00004 - -#define OCOTEA_PCI_IO_BASE 0x0000000208000000ULL -#define OCOTEA_PCI_IO_SIZE 0x00010000 -#define OCOTEA_PCI_MEM_OFFSET 0x00000000 - -#endif /* __ASM_OCOTEA_H__ */ -#endif /* __KERNEL__ */ |