diff options
Diffstat (limited to 'arch/ppc/syslib/m8260_setup.c')
| -rw-r--r-- | arch/ppc/syslib/m8260_setup.c | 266 |
1 files changed, 0 insertions, 266 deletions
diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c deleted file mode 100644 index b40583724de3..000000000000 --- a/arch/ppc/syslib/m8260_setup.c +++ /dev/null @@ -1,266 +0,0 @@ -/* - * Copyright (C) 1995 Linus Torvalds - * Adapted from 'alpha' version by Gary Thomas - * Modified by Cort Dougan (cort@cs.nmt.edu) - * Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net) - * Further modified for generic 8xx and 8260 by Dan. - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/stddef.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/initrd.h> -#include <linux/root_dev.h> -#include <linux/seq_file.h> -#include <linux/irq.h> - -#include <asm/mmu.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/mpc8260.h> -#include <asm/cpm2.h> -#include <asm/machdep.h> -#include <asm/bootinfo.h> -#include <asm/time.h> -#include <asm/ppc_sys.h> - -#include "cpm2_pic.h" - -unsigned char __res[sizeof(bd_t)]; - -extern void pq2_find_bridges(void); -extern void pq2pci_init_irq(void); -extern void idma_pci9_init(void); - -/* Place-holder for board-specific init */ -void __attribute__ ((weak)) __init -m82xx_board_setup(void) -{ -} - -static void __init -m8260_setup_arch(void) -{ - /* Print out Vendor and Machine info. */ - printk(KERN_INFO "%s %s port\n", CPUINFO_VENDOR, CPUINFO_MACHINE); - - /* Reset the Communication Processor Module. */ - cpm2_reset(); -#ifdef CONFIG_8260_PCI9 - /* Initialise IDMA for PCI erratum workaround */ - idma_pci9_init(); -#endif -#ifdef CONFIG_PCI_8260 - pq2_find_bridges(); -#endif -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; -#endif - - identify_ppc_sys_by_name_and_id(BOARD_CHIP_NAME, - in_be32((void *)CPM_MAP_ADDR + CPM_IMMR_OFFSET)); - - m82xx_board_setup(); -} - -/* The decrementer counts at the system (internal) clock frequency - * divided by four. - */ -static void __init -m8260_calibrate_decr(void) -{ - bd_t *binfo = (bd_t *)__res; - int freq, divisor; - - freq = binfo->bi_busfreq; - divisor = 4; - tb_ticks_per_jiffy = freq / HZ / divisor; - tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000); -} - -/* The 8260 has an internal 1-second timer update register that - * we should use for this purpose. - */ -static uint rtc_time; - -static int -m8260_set_rtc_time(unsigned long time) -{ - rtc_time = time; - - return(0); -} - -static unsigned long -m8260_get_rtc_time(void) -{ - /* Get time from the RTC. - */ - return((unsigned long)rtc_time); -} - -#ifndef BOOTROM_RESTART_ADDR -#warning "Using default BOOTROM_RESTART_ADDR!" -#define BOOTROM_RESTART_ADDR 0xff000104 -#endif - -static void -m8260_restart(char *cmd) -{ - extern void m8260_gorom(bd_t *bi, uint addr); - uint startaddr; - - /* Most boot roms have a warmstart as the second instruction - * of the reset vector. If that doesn't work for you, change this - * or the reboot program to send a proper address. - */ - startaddr = BOOTROM_RESTART_ADDR; - if (cmd != NULL) { - if (!strncmp(cmd, "startaddr=", 10)) - startaddr = simple_strtoul(&cmd[10], NULL, 0); - } - - m8260_gorom((void*)__pa(__res), startaddr); -} - -static void -m8260_halt(void) -{ - local_irq_disable(); - while (1); -} - -static void -m8260_power_off(void) -{ - m8260_halt(); -} - -static int -m8260_show_cpuinfo(struct seq_file *m) -{ - bd_t *bp = (bd_t *)__res; - - seq_printf(m, "vendor\t\t: %s\n" - "machine\t\t: %s\n" - "\n" - "mem size\t\t: 0x%08lx\n" - "console baud\t\t: %ld\n" - "\n" - "core clock\t: %lu MHz\n" - "CPM clock\t: %lu MHz\n" - "bus clock\t: %lu MHz\n", - CPUINFO_VENDOR, CPUINFO_MACHINE, bp->bi_memsize, - bp->bi_baudrate, bp->bi_intfreq / 1000000, - bp->bi_cpmfreq / 1000000, bp->bi_busfreq / 1000000); - return 0; -} - -/* Initialize the internal interrupt controller. The number of - * interrupts supported can vary with the processor type, and the - * 8260 family can have up to 64. - * External interrupts can be either edge or level triggered, and - * need to be initialized by the appropriate driver. - */ -static void __init -m8260_init_IRQ(void) -{ - cpm2_init_IRQ(); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - cpm2_immr->im_intctl.ic_siprr = 0x05309770; -} - -/* - * Same hack as 8xx - */ -static unsigned long __init -m8260_find_end_of_memory(void) -{ - bd_t *binfo = (bd_t *)__res; - - return binfo->bi_memsize; -} - -/* Map the IMMR, plus anything else we can cover - * in that upper space according to the memory controller - * chip select mapping. Grab another bunch of space - * below that for stuff we can't cover in the upper. - */ -static void __init -m8260_map_io(void) -{ - uint addr; - - /* Map IMMR region to a 256MB BAT */ - addr = (cpm2_immr != NULL) ? (uint)cpm2_immr : CPM_MAP_ADDR; - io_block_mapping(addr, addr, 0x10000000, _PAGE_IO); - - /* Map I/O region to a 256MB BAT */ - io_block_mapping(IO_VIRT_ADDR, IO_PHYS_ADDR, 0x10000000, _PAGE_IO); -} - -/* Place-holder for board-specific ppc_md hooking */ -void __attribute__ ((weak)) __init -m82xx_board_init(void) -{ -} - -/* Inputs: - * r3 - Optional pointer to a board information structure. - * r4 - Optional pointer to the physical starting address of the init RAM - * disk. - * r5 - Optional pointer to the physical ending address of the init RAM - * disk. - * r6 - Optional pointer to the physical starting address of any kernel - * command-line parameters. - * r7 - Optional pointer to the physical ending address of any kernel - * command-line parameters. - */ -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - parse_bootinfo(find_bootinfo()); - - if ( r3 ) - memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) ); - -#ifdef CONFIG_BLK_DEV_INITRD - /* take care of initrd if we have one */ - if ( r4 ) { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - /* take care of cmd line */ - if ( r6 ) { - *(char *)(r7+KERNELBASE) = 0; - strcpy(cmd_line, (char *)(r6+KERNELBASE)); - } - - ppc_md.setup_arch = m8260_setup_arch; - ppc_md.show_cpuinfo = m8260_show_cpuinfo; - ppc_md.init_IRQ = m8260_init_IRQ; - ppc_md.get_irq = cpm2_get_irq; - - ppc_md.restart = m8260_restart; - ppc_md.power_off = m8260_power_off; - ppc_md.halt = m8260_halt; - - ppc_md.set_rtc_time = m8260_set_rtc_time; - ppc_md.get_rtc_time = m8260_get_rtc_time; - ppc_md.calibrate_decr = m8260_calibrate_decr; - - ppc_md.find_end_of_memory = m8260_find_end_of_memory; - ppc_md.setup_io_mappings = m8260_map_io; - - /* Call back for board-specific settings and overrides. */ - m82xx_board_init(); -} |