diff options
Diffstat (limited to 'arch/riscv/Kconfig')
-rw-r--r-- | arch/riscv/Kconfig | 126 |
1 files changed, 102 insertions, 24 deletions
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 85d626b8ce5e..469a70bd8da6 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -20,6 +20,7 @@ config RISCV select ARCH_HAS_DEBUG_VM_PGTABLE select ARCH_HAS_DEBUG_VIRTUAL if MMU select ARCH_HAS_DEBUG_WX + select ARCH_HAS_FORTIFY_SOURCE select ARCH_HAS_GCOV_PROFILE_ALL select ARCH_HAS_GIGANTIC_PAGE select ARCH_HAS_KCOV @@ -27,18 +28,24 @@ config RISCV select ARCH_HAS_PTE_SPECIAL select ARCH_HAS_SET_DIRECT_MAP select ARCH_HAS_SET_MEMORY - select ARCH_HAS_STRICT_KERNEL_RWX if MMU + select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL + select ARCH_HAS_STRICT_MODULE_RWX if MMU && !XIP_KERNEL + select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT + select ARCH_SUPPORTS_HUGETLBFS if MMU + select ARCH_USE_MEMTEST select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU select ARCH_WANT_FRAME_POINTERS select ARCH_WANT_HUGE_PMD_SHARE if 64BIT + select BINFMT_FLAT_NO_DATA_START_OFFSET if !MMU select CLONE_BACKWARDS select CLINT_TIMER if !MMU select COMMON_CLK select EDAC_SUPPORT select GENERIC_ARCH_TOPOLOGY if SMP select GENERIC_ATOMIC64 if !64BIT + select GENERIC_CLOCKEVENTS_BROADCAST if SMP select GENERIC_EARLY_IOREMAP select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO select GENERIC_IOREMAP @@ -54,11 +61,11 @@ config RISCV select GENERIC_TIME_VSYSCALL if MMU && 64BIT select HANDLE_DOMAIN_IRQ select HAVE_ARCH_AUDITSYSCALL - select HAVE_ARCH_JUMP_LABEL - select HAVE_ARCH_JUMP_LABEL_RELATIVE + select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL + select HAVE_ARCH_JUMP_LABEL_RELATIVE if !XIP_KERNEL select HAVE_ARCH_KASAN if MMU && 64BIT select HAVE_ARCH_KASAN_VMALLOC if MMU && 64BIT - select HAVE_ARCH_KGDB + select HAVE_ARCH_KGDB if !XIP_KERNEL select HAVE_ARCH_KGDB_QXFER_PKT select HAVE_ARCH_MMAP_RND_BITS if MMU select HAVE_ARCH_SECCOMP_FILTER @@ -73,9 +80,9 @@ config RISCV select HAVE_GCC_PLUGINS select HAVE_GENERIC_VDSO if MMU && 64BIT select HAVE_IRQ_TIME_ACCOUNTING - select HAVE_KPROBES - select HAVE_KPROBES_ON_FTRACE - select HAVE_KRETPROBES + select HAVE_KPROBES if !XIP_KERNEL + select HAVE_KPROBES_ON_FTRACE if !XIP_KERNEL + select HAVE_KRETPROBES if !XIP_KERNEL select HAVE_PCI select HAVE_PERF_EVENTS select HAVE_PERF_REGS @@ -93,11 +100,11 @@ config RISCV select PCI_MSI if PCI select RISCV_INTC select RISCV_TIMER if RISCV_SBI - select SPARSEMEM_STATIC if 32BIT select SPARSE_IRQ select SYSCTL_EXCEPTION_TRACE select THREAD_INFO_IN_TASK select UACCESS_MEMCPY if !MMU + select ZONE_DMA32 if 64BIT config ARCH_MMAP_RND_BITS_MIN default 18 if 64BIT @@ -127,10 +134,6 @@ config MMU Select if you want MMU-based virtualised addressing space support by paged memory management. If unsure, say 'Y'. -config ZONE_DMA32 - bool - default y if 64BIT - config VA_BITS int default 32 if 32BIT @@ -154,7 +157,8 @@ config ARCH_FLATMEM_ENABLE config ARCH_SPARSEMEM_ENABLE def_bool y depends on MMU - select SPARSEMEM_VMEMMAP_ENABLE + select SPARSEMEM_STATIC if 32BIT && SPARSEMEM + select SPARSEMEM_VMEMMAP_ENABLE if 64BIT config ARCH_SELECT_MEMORY_MODEL def_bool ARCH_SPARSEMEM_ENABLE @@ -165,10 +169,6 @@ config ARCH_WANT_GENERAL_HUGETLB config ARCH_SUPPORTS_UPROBES def_bool y -config SYS_SUPPORTS_HUGETLBFS - depends on MMU - def_bool y - config STACKTRACE_SUPPORT def_bool y @@ -204,6 +204,7 @@ config LOCKDEP_SUPPORT def_bool y source "arch/riscv/Kconfig.socs" +source "arch/riscv/Kconfig.erratas" menu "Platform type" @@ -227,11 +228,11 @@ config ARCH_RV64I bool "RV64I" select 64BIT select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 && GCC_VERSION >= 50000 - select HAVE_DYNAMIC_FTRACE if MMU + select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && MMU && $(cc-option,-fpatchable-function-entry=8) select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE - select HAVE_FTRACE_MCOUNT_RECORD + select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL select HAVE_FUNCTION_GRAPH_TRACER - select HAVE_FUNCTION_TRACER + select HAVE_FUNCTION_TRACER if !XIP_KERNEL select SWIOTLB if MMU endchoice @@ -314,7 +315,7 @@ endchoice # Common NUMA Features config NUMA bool "NUMA Memory Allocation and Scheduler Support" - depends on SMP + depends on SMP && MMU select GENERIC_ARCH_NUMA select OF_NUMA select ARCH_SUPPORTS_NUMA_BALANCING @@ -328,7 +329,7 @@ config NODES_SHIFT int "Maximum NUMA Nodes (as a power of 2)" range 1 10 default "2" - depends on NEED_MULTIPLE_NODES + depends on NUMA help Specify the maximum number of NUMA Nodes available on the target system. Increases memory reserved to accommodate various tables. @@ -386,6 +387,31 @@ config RISCV_SBI_V01 help This config allows kernel to use SBI v0.1 APIs. This will be deprecated in future once legacy M-mode software are no longer in use. + +config KEXEC + bool "Kexec system call" + select KEXEC_CORE + select HOTPLUG_CPU if SMP + depends on MMU + help + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is independent of the system firmware. And like a reboot + you can start any kernel with it, not just Linux. + + The name comes from the similarity to the exec system call. + +config CRASH_DUMP + bool "Build kdump crash kernel" + help + Generate crash dump after being started by kexec. This should + be normally only set in special crash dump kernels which are + loaded in the main kernel with kexec-tools into a specially + reserved region and then later executed after a crash by + kdump/kexec. + + For more details see Documentation/admin-guide/kdump/kdump.rst + endmenu menu "Boot options" @@ -438,7 +464,7 @@ config EFI_STUB config EFI bool "UEFI runtime support" - depends on OF + depends on OF && !XIP_KERNEL select LIBFDT select UCS2_STRING select EFI_PARAMS_FROM_FDT @@ -462,11 +488,63 @@ config STACKPROTECTOR_PER_TASK def_bool y depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS +config PHYS_RAM_BASE_FIXED + bool "Explicitly specified physical RAM address" + default n + +config PHYS_RAM_BASE + hex "Platform Physical RAM address" + depends on PHYS_RAM_BASE_FIXED + default "0x80000000" + help + This is the physical address of RAM in the system. It has to be + explicitly specified to run early relocations of read-write data + from flash to RAM. + +config XIP_KERNEL + bool "Kernel Execute-In-Place from ROM" + depends on MMU && SPARSEMEM + # This prevents XIP from being enabled by all{yes,mod}config, which + # fail to build since XIP doesn't support large kernels. + depends on !COMPILE_TEST + select PHYS_RAM_BASE_FIXED + help + Execute-In-Place allows the kernel to run from non-volatile storage + directly addressable by the CPU, such as NOR flash. This saves RAM + space since the text section of the kernel is not loaded from flash + to RAM. Read-write sections, such as the data section and stack, + are still copied to RAM. The XIP kernel is not compressed since + it has to run directly from flash, so it will take more space to + store it. The flash address used to link the kernel object files, + and for storing it, is configuration dependent. Therefore, if you + say Y here, you must know the proper physical address where to + store the kernel image depending on your own flash memory usage. + + Also note that the make target becomes "make xipImage" rather than + "make zImage" or "make Image". The final kernel binary to put in + ROM memory will be arch/riscv/boot/xipImage. + + SPARSEMEM is required because the kernel text and rodata that are + flash resident are not backed by memmap, then any attempt to get + a struct page on those regions will trigger a fault. + + If unsure, say N. + +config XIP_PHYS_ADDR + hex "XIP Kernel Physical Location" + depends on XIP_KERNEL + default "0x21000000" + help + This is the physical address in your flash memory the kernel will + be linked for and stored to. This address is dependent on your + own flash usage. + endmenu config BUILTIN_DTB - def_bool n + bool depends on OF + default y if XIP_KERNEL menu "Power management options" |