diff options
Diffstat (limited to '')
27 files changed, 2034 insertions, 552 deletions
diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile index fe996b88319e..ff174996cdfd 100644 --- a/arch/riscv/boot/dts/Makefile +++ b/arch/riscv/boot/dts/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 subdir-y += sifive +subdir-y += starfive subdir-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += canaan subdir-y += microchip diff --git a/arch/riscv/boot/dts/canaan/Makefile b/arch/riscv/boot/dts/canaan/Makefile index 9ee7156c0c31..befe4eb7527b 100644 --- a/arch/riscv/boot/dts/canaan/Makefile +++ b/arch/riscv/boot/dts/canaan/Makefile @@ -1,5 +1,9 @@ # SPDX-License-Identifier: GPL-2.0 -ifneq ($(CONFIG_SOC_CANAAN_K210_DTB_SOURCE),"") -dtb-y += $(strip $(shell echo $(CONFIG_SOC_CANAAN_K210_DTB_SOURCE))).dtb -obj-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .o, $(dtb-y)) -endif +dtb-$(CONFIG_SOC_CANAAN) += canaan_kd233.dtb +dtb-$(CONFIG_SOC_CANAAN) += k210_generic.dtb +dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_bit.dtb +dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_dock.dtb +dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_go.dtb +dtb-$(CONFIG_SOC_CANAAN) += sipeed_maixduino.dtb + +obj-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .dtb.o, $(CONFIG_SOC_CANAAN_K210_DTB_SOURCE)) diff --git a/arch/riscv/boot/dts/canaan/canaan_kd233.dts b/arch/riscv/boot/dts/canaan/canaan_kd233.dts index 039b92abf046..8df4cf3656f2 100644 --- a/arch/riscv/boot/dts/canaan/canaan_kd233.dts +++ b/arch/riscv/boot/dts/canaan/canaan_kd233.dts @@ -35,7 +35,7 @@ gpio-keys { compatible = "gpio-keys"; - key0 { + key { label = "KEY0"; linux,code = <BTN_0>; gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; @@ -127,10 +127,10 @@ cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; panel@0 { - compatible = "ilitek,ili9341"; + compatible = "canaan,kd233-tft", "ilitek,ili9341"; reg = <0>; dc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; - spi-max-frequency = <15000000>; + spi-max-frequency = <10000000>; status = "disabled"; }; }; @@ -142,7 +142,7 @@ cs-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; status = "okay"; - slot@0 { + mmc@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3300 3300>; diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi index 5e8ca8142482..07e2e2649604 100644 --- a/arch/riscv/boot/dts/canaan/k210.dtsi +++ b/arch/riscv/boot/dts/canaan/k210.dtsi @@ -65,15 +65,29 @@ compatible = "riscv,cpu-intc"; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + }; + }; }; sram: memory@80000000 { device_type = "memory"; + reg = <0x80000000 0x400000>, /* sram0 4 MiB */ + <0x80400000 0x200000>, /* sram1 2 MiB */ + <0x80600000 0x200000>; /* aisram 2 MiB */ + }; + + sram_controller: memory-controller { compatible = "canaan,k210-sram"; - reg = <0x80000000 0x400000>, - <0x80400000 0x200000>, - <0x80600000 0x200000>; - reg-names = "sram0", "sram1", "aisram"; clocks = <&sysclk K210_CLK_SRAM0>, <&sysclk K210_CLK_SRAM1>, <&sysclk K210_CLK_AI>; @@ -103,8 +117,8 @@ clint0: timer@2000000 { compatible = "canaan,k210-clint", "sifive,clint0"; reg = <0x2000000 0xC000>; - interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 - &cpu1_intc 3 &cpu1_intc 7>; + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, + <&cpu1_intc 3>, <&cpu1_intc 7>; }; plic0: interrupt-controller@c000000 { @@ -113,7 +127,8 @@ compatible = "canaan,k210-plic", "sifive,plic-1.0.0"; reg = <0xC000000 0x4000000>; interrupt-controller; - interrupts-extended = <&cpu0_intc 11 &cpu1_intc 11>; + interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>, + <&cpu1_intc 11>, <&cpu1_intc 9>; riscv,ndev = <65>; }; @@ -130,10 +145,11 @@ compatible = "canaan,k210-gpiohs", "sifive,gpio0"; reg = <0x38001000 0x1000>; interrupt-controller; - interrupts = <34 35 36 37 38 39 40 41 - 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 - 58 59 60 61 62 63 64 65>; + interrupts = <34>, <35>, <36>, <37>, <38>, <39>, <40>, + <41>, <42>, <43>, <44>, <45>, <46>, <47>, + <48>, <49>, <50>, <51>, <52>, <53>, <54>, + <55>, <56>, <57>, <58>, <59>, <60>, <61>, + <62>, <63>, <64>, <65>; gpio-controller; ngpios = <32>; }; @@ -141,7 +157,7 @@ dmac0: dma-controller@50000000 { compatible = "snps,axi-dma-1.01a"; reg = <0x50000000 0x1000>; - interrupts = <27 28 29 30 31 32>; + interrupts = <27>, <28>, <29>, <30>, <31>, <32>; #dma-cells = <1>; clocks = <&sysclk K210_CLK_DMA>, <&sysclk K210_CLK_DMA>; clock-names = "core-clk", "cfgr-clk"; @@ -159,7 +175,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-pm-bus"; - ranges; + ranges = <0x50200000 0x50200000 0x200000>; clocks = <&sysclk K210_CLK_APB0>; gpio1: gpio@50200000 { @@ -247,7 +263,7 @@ }; i2s0: i2s@50250000 { - compatible = "snps,designware-i2s"; + compatible = "canaan,k210-i2s", "snps,designware-i2s"; reg = <0x50250000 0x200>; interrupts = <5>; clocks = <&sysclk K210_CLK_I2S0>; @@ -256,7 +272,7 @@ }; i2s1: i2s@50260000 { - compatible = "snps,designware-i2s"; + compatible = "canaan,k210-i2s", "snps,designware-i2s"; reg = <0x50260000 0x200>; interrupts = <6>; clocks = <&sysclk K210_CLK_I2S1>; @@ -265,7 +281,7 @@ }; i2s2: i2s@50270000 { - compatible = "snps,designware-i2s"; + compatible = "canaan,k210-i2s", "snps,designware-i2s"; reg = <0x50270000 0x200>; interrupts = <7>; clocks = <&sysclk K210_CLK_I2S2>; @@ -315,28 +331,58 @@ timer0: timer@502d0000 { compatible = "snps,dw-apb-timer"; - reg = <0x502D0000 0x100>; - interrupts = <14 15>; + reg = <0x502D0000 0x14>; + interrupts = <14>; clocks = <&sysclk K210_CLK_TIMER0>, <&sysclk K210_CLK_APB0>; clock-names = "timer", "pclk"; resets = <&sysrst K210_RST_TIMER0>; }; - timer1: timer@502e0000 { + timer1: timer@502d0014 { + compatible = "snps,dw-apb-timer"; + reg = <0x502D0014 0x14>; + interrupts = <15>; + clocks = <&sysclk K210_CLK_TIMER0>, + <&sysclk K210_CLK_APB0>; + clock-names = "timer", "pclk"; + resets = <&sysrst K210_RST_TIMER0>; + }; + + timer2: timer@502e0000 { + compatible = "snps,dw-apb-timer"; + reg = <0x502E0000 0x14>; + interrupts = <16>; + clocks = <&sysclk K210_CLK_TIMER1>, + <&sysclk K210_CLK_APB0>; + clock-names = "timer", "pclk"; + resets = <&sysrst K210_RST_TIMER1>; + }; + + timer3: timer@502e0014 { compatible = "snps,dw-apb-timer"; - reg = <0x502E0000 0x100>; - interrupts = <16 17>; + reg = <0x502E0014 0x114>; + interrupts = <17>; clocks = <&sysclk K210_CLK_TIMER1>, <&sysclk K210_CLK_APB0>; clock-names = "timer", "pclk"; resets = <&sysrst K210_RST_TIMER1>; }; - timer2: timer@502f0000 { + timer4: timer@502f0000 { + compatible = "snps,dw-apb-timer"; + reg = <0x502F0000 0x14>; + interrupts = <18>; + clocks = <&sysclk K210_CLK_TIMER2>, + <&sysclk K210_CLK_APB0>; + clock-names = "timer", "pclk"; + resets = <&sysrst K210_RST_TIMER2>; + }; + + timer5: timer@502f0014 { compatible = "snps,dw-apb-timer"; - reg = <0x502F0000 0x100>; - interrupts = <18 19>; + reg = <0x502F0014 0x14>; + interrupts = <19>; clocks = <&sysclk K210_CLK_TIMER2>, <&sysclk K210_CLK_APB0>; clock-names = "timer", "pclk"; @@ -348,7 +394,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-pm-bus"; - ranges; + ranges = <0x50400000 0x50400000 0x40100>; clocks = <&sysclk K210_CLK_APB1>; wdt0: watchdog@50400000 { @@ -403,7 +449,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-pm-bus"; - ranges; + ranges = <0x52000000 0x52000000 0x2000200>; clocks = <&sysclk K210_CLK_APB2>; spi0: spi@52000000 { @@ -417,7 +463,6 @@ clock-names = "ssi_clk", "pclk"; resets = <&sysrst K210_RST_SPI0>; reset-names = "spi"; - spi-max-frequency = <25000000>; num-cs = <4>; reg-io-width = <4>; }; @@ -433,7 +478,6 @@ clock-names = "ssi_clk", "pclk"; resets = <&sysrst K210_RST_SPI1>; reset-names = "spi"; - spi-max-frequency = <25000000>; num-cs = <4>; reg-io-width = <4>; }; @@ -449,8 +493,7 @@ clock-names = "ssi_clk", "pclk"; resets = <&sysrst K210_RST_SPI3>; reset-names = "spi"; - /* Could possibly go up to 200 MHz */ - spi-max-frequency = <100000000>; + num-cs = <4>; reg-io-width = <4>; }; diff --git a/arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts b/arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts index 0bcaf35045e7..6d25bf07481a 100644 --- a/arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts +++ b/arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts @@ -47,7 +47,7 @@ gpio-keys { compatible = "gpio-keys"; - boot { + key-boot { label = "BOOT"; linux,code = <BTN_0>; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; @@ -189,7 +189,7 @@ cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; status = "okay"; - slot@0 { + mmc@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3300 3300>; @@ -199,10 +199,12 @@ }; &spi3 { - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; m25p,fast-read; broken-flash-reset; }; diff --git a/arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts b/arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts index ac8a03f5867a..f4f4d8d5e8b8 100644 --- a/arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts +++ b/arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts @@ -52,7 +52,7 @@ gpio-keys { compatible = "gpio-keys"; - boot { + key-boot { label = "BOOT"; linux,code = <BTN_0>; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; @@ -191,7 +191,7 @@ cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; status = "okay"; - slot@0 { + mmc@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3300 3300>; @@ -201,10 +201,12 @@ }; &spi3 { - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; m25p,fast-read; broken-flash-reset; }; diff --git a/arch/riscv/boot/dts/canaan/sipeed_maix_go.dts b/arch/riscv/boot/dts/canaan/sipeed_maix_go.dts index 623998194bc1..0d86df47e1ed 100644 --- a/arch/riscv/boot/dts/canaan/sipeed_maix_go.dts +++ b/arch/riscv/boot/dts/canaan/sipeed_maix_go.dts @@ -46,19 +46,19 @@ gpio-keys { compatible = "gpio-keys"; - up { + key-up { label = "UP"; linux,code = <BTN_1>; gpios = <&gpio1_0 7 GPIO_ACTIVE_LOW>; }; - press { + key-press { label = "PRESS"; linux,code = <BTN_0>; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; }; - down { + key-down { label = "DOWN"; linux,code = <BTN_2>; gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; @@ -199,7 +199,7 @@ cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; status = "okay"; - slot@0 { + mmc@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3300 3300>; @@ -209,10 +209,12 @@ }; &spi3 { - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; m25p,fast-read; broken-flash-reset; }; diff --git a/arch/riscv/boot/dts/canaan/sipeed_maixduino.dts b/arch/riscv/boot/dts/canaan/sipeed_maixduino.dts index cf605ba0d67e..5c05c498e2b8 100644 --- a/arch/riscv/boot/dts/canaan/sipeed_maixduino.dts +++ b/arch/riscv/boot/dts/canaan/sipeed_maixduino.dts @@ -23,7 +23,7 @@ gpio-keys { compatible = "gpio-keys"; - boot { + key-boot { label = "BOOT"; linux,code = <BTN_0>; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; @@ -164,7 +164,7 @@ cs-gpios = <&gpio1_0 2 GPIO_ACTIVE_LOW>; status = "okay"; - slot@0 { + mmc@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3300 3300>; @@ -174,10 +174,12 @@ }; &spi3 { - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; m25p,fast-read; broken-flash-reset; }; diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile index 855c1502d912..7427a20934f3 100644 --- a/arch/riscv/boot/dts/microchip/Makefile +++ b/arch/riscv/boot/dts/microchip/Makefile @@ -1,3 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-mpfs-icicle-kit.dtb +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp.dtb +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-sev-kit.dtb obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y)) diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts deleted file mode 100644 index fc1e5869df1b..000000000000 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts +++ /dev/null @@ -1,84 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* Copyright (c) 2020 Microchip Technology Inc */ - -/dts-v1/; - -#include "microchip-mpfs.dtsi" - -/* Clock frequency (in Hz) of the rtcclk */ -#define RTCCLK_FREQ 1000000 - -/ { - model = "Microchip PolarFire-SoC Icicle Kit"; - compatible = "microchip,mpfs-icicle-kit", "microchip,mpfs"; - - aliases { - ethernet0 = &emac1; - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - serial3 = &serial3; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cpus { - timebase-frequency = <RTCCLK_FREQ>; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x40000000>; - clocks = <&clkcfg 26>; - }; -}; - -&serial0 { - status = "okay"; -}; - -&serial1 { - status = "okay"; -}; - -&serial2 { - status = "okay"; -}; - -&serial3 { - status = "okay"; -}; - -&mmc { - status = "okay"; - - bus-width = <4>; - disable-wp; - cap-sd-highspeed; - card-detect-delay = <200>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; -}; - -&emac0 { - phy-mode = "sgmii"; - phy-handle = <&phy0>; - phy0: ethernet-phy@8 { - reg = <8>; - ti,fifo-depth = <0x01>; - }; -}; - -&emac1 { - status = "okay"; - phy-mode = "sgmii"; - phy-handle = <&phy1>; - phy1: ethernet-phy@9 { - reg = <9>; - ti,fifo-depth = <0x01>; - }; -}; diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi deleted file mode 100644 index c9f6d205d2ba..000000000000 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi +++ /dev/null @@ -1,303 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* Copyright (c) 2020 Microchip Technology Inc */ - -/dts-v1/; - -/ { - #address-cells = <2>; - #size-cells = <2>; - model = "Microchip PolarFire SoC"; - compatible = "microchip,mpfs"; - - chosen { - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - clock-frequency = <0>; - compatible = "sifive,e51", "sifive,rocket0", "riscv"; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <128>; - i-cache-size = <16384>; - reg = <0>; - riscv,isa = "rv64imac"; - status = "disabled"; - - cpu0_intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - - cpu@1 { - clock-frequency = <0>; - compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <32>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <32>; - mmu-type = "riscv,sv39"; - reg = <1>; - riscv,isa = "rv64imafdc"; - tlb-split; - status = "okay"; - - cpu1_intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - - cpu@2 { - clock-frequency = <0>; - compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <32>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <32>; - mmu-type = "riscv,sv39"; - reg = <2>; - riscv,isa = "rv64imafdc"; - tlb-split; - status = "okay"; - - cpu2_intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - - cpu@3 { - clock-frequency = <0>; - compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <32>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <32>; - mmu-type = "riscv,sv39"; - reg = <3>; - riscv,isa = "rv64imafdc"; - tlb-split; - status = "okay"; - - cpu3_intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - - cpu@4 { - clock-frequency = <0>; - compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <32>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <32>; - mmu-type = "riscv,sv39"; - reg = <4>; - riscv,isa = "rv64imafdc"; - tlb-split; - status = "okay"; - cpu4_intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - }; - - soc { - #address-cells = <2>; - #size-cells = <2>; - compatible = "simple-bus"; - ranges; - - cache-controller@2010000 { - compatible = "sifive,fu540-c000-ccache", "cache"; - cache-block-size = <64>; - cache-level = <2>; - cache-sets = <1024>; - cache-size = <2097152>; - cache-unified; - interrupt-parent = <&plic>; - interrupts = <1 2 3>; - reg = <0x0 0x2010000 0x0 0x1000>; - }; - - clint@2000000 { - compatible = "sifive,fu540-c000-clint", "sifive,clint0"; - reg = <0x0 0x2000000 0x0 0xC000>; - interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 - &cpu1_intc 3 &cpu1_intc 7 - &cpu2_intc 3 &cpu2_intc 7 - &cpu3_intc 3 &cpu3_intc 7 - &cpu4_intc 3 &cpu4_intc 7>; - }; - - plic: interrupt-controller@c000000 { - #interrupt-cells = <1>; - compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0"; - reg = <0x0 0xc000000 0x0 0x4000000>; - riscv,ndev = <186>; - interrupt-controller; - interrupts-extended = <&cpu0_intc 11 - &cpu1_intc 11 &cpu1_intc 9 - &cpu2_intc 11 &cpu2_intc 9 - &cpu3_intc 11 &cpu3_intc 9 - &cpu4_intc 11 &cpu4_intc 9>; - }; - - dma@3000000 { - compatible = "sifive,fu540-c000-pdma"; - reg = <0x0 0x3000000 0x0 0x8000>; - interrupt-parent = <&plic>; - interrupts = <23 24 25 26 27 28 29 30>; - #dma-cells = <1>; - }; - - refclk: refclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <600000000>; - clock-output-names = "msspllclk"; - }; - - clkcfg: clkcfg@20002000 { - compatible = "microchip,mpfs-clkcfg"; - reg = <0x0 0x20002000 0x0 0x1000>; - reg-names = "mss_sysreg"; - clocks = <&refclk>; - #clock-cells = <1>; - clock-output-names = "cpu", "axi", "ahb", "envm", /* 0-3 */ - "mac0", "mac1", "mmc", "timer", /* 4-7 */ - "mmuart0", "mmuart1", "mmuart2", "mmuart3", /* 8-11 */ - "mmuart4", "spi0", "spi1", "i2c0", /* 12-15 */ - "i2c1", "can0", "can1", "usb", /* 16-19 */ - "rsvd", "rtc", "qspi", "gpio0", /* 20-23 */ - "gpio1", "gpio2", "ddrc", "fic0", /* 24-27 */ - "fic1", "fic2", "fic3", "athena", "cfm"; /* 28-32 */ - }; - - serial0: serial@20000000 { - compatible = "ns16550a"; - reg = <0x0 0x20000000 0x0 0x400>; - reg-io-width = <4>; - reg-shift = <2>; - interrupt-parent = <&plic>; - interrupts = <90>; - current-speed = <115200>; - clocks = <&clkcfg 8>; - status = "disabled"; - }; - - serial1: serial@20100000 { - compatible = "ns16550a"; - reg = <0x0 0x20100000 0x0 0x400>; - reg-io-width = <4>; - reg-shift = <2>; - interrupt-parent = <&plic>; - interrupts = <91>; - current-speed = <115200>; - clocks = <&clkcfg 9>; - status = "disabled"; - }; - - serial2: serial@20102000 { - compatible = "ns16550a"; - reg = <0x0 0x20102000 0x0 0x400>; - reg-io-width = <4>; - reg-shift = <2>; - interrupt-parent = <&plic>; - interrupts = <92>; - current-speed = <115200>; - clocks = <&clkcfg 10>; - status = "disabled"; - }; - - serial3: serial@20104000 { - compatible = "ns16550a"; - reg = <0x0 0x20104000 0x0 0x400>; - reg-io-width = <4>; - reg-shift = <2>; - interrupt-parent = <&plic>; - interrupts = <93>; - current-speed = <115200>; - clocks = <&clkcfg 11>; - status = "disabled"; - }; - - /* Common node entry for emmc/sd */ - mmc: mmc@20008000 { - compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc"; - reg = <0x0 0x20008000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <88 89>; - clocks = <&clkcfg 6>; - max-frequency = <200000000>; - status = "disabled"; - }; - - emac0: ethernet@20110000 { - compatible = "cdns,macb"; - reg = <0x0 0x20110000 0x0 0x2000>; - interrupt-parent = <&plic>; - interrupts = <64 65 66 67>; - local-mac-address = [00 00 00 00 00 00]; - clocks = <&clkcfg 4>, <&clkcfg 2>; - clock-names = "pclk", "hclk"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - emac1: ethernet@20112000 { - compatible = "cdns,macb"; - reg = <0x0 0x20112000 0x0 0x2000>; - interrupt-parent = <&plic>; - interrupts = <70 71 72 73>; - local-mac-address = [00 00 00 00 00 00]; - clocks = <&clkcfg 5>, <&clkcfg 2>; - status = "disabled"; - clock-names = "pclk", "hclk"; - #address-cells = <1>; - #size-cells = <0>; - }; - - }; -}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi new file mode 100644 index 000000000000..24b1cfb9a73e --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +/ { + compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit", + "microchip,mpfs"; + + core_pwm0: pwm@40000000 { + compatible = "microchip,corepwm-rtl-v4"; + reg = <0x0 0x40000000 0x0 0xF0>; + microchip,sync-update-mask = /bits/ 32 <0>; + #pwm-cells = <2>; + clocks = <&fabric_clk3>; + status = "disabled"; + }; + + i2c2: i2c@40000200 { + compatible = "microchip,corei2c-rtl-v7"; + reg = <0x0 0x40000200 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&fabric_clk3>; + interrupt-parent = <&plic>; + interrupts = <122>; + clock-frequency = <100000>; + status = "disabled"; + }; + + fabric_clk3: fabric-clk3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + fabric_clk1: fabric-clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + pcie: pcie@3000000000 { + compatible = "microchip,pcie-host-1.0"; + #address-cells = <0x3>; + #interrupt-cells = <0x1>; + #size-cells = <0x2>; + device_type = "pci"; + reg = <0x30 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; + reg-names = "cfg", "apb"; + bus-range = <0x0 0x7f>; + interrupt-parent = <&plic>; + interrupts = <119>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + interrupt-map-mask = <0 0 0 7>; + clocks = <&fabric_clk1>, <&fabric_clk3>; + clock-names = "fic1", "fic3"; + ranges = <0x3000000 0x0 0x8000000 0x30 0x8000000 0x0 0x80000000>; + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x1 0x00000000>; + msi-parent = <&pcie>; + msi-controller; + status = "disabled"; + pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts new file mode 100644 index 000000000000..ec7b7c2a3ce2 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +/dts-v1/; + +#include "mpfs.dtsi" +#include "mpfs-icicle-kit-fabric.dtsi" + +/* Clock frequency (in Hz) of the rtcclk */ +#define RTCCLK_FREQ 1000000 + +/ { + model = "Microchip PolarFire-SoC Icicle Kit"; + compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit", + "microchip,mpfs"; + + aliases { + ethernet0 = &mac1; + serial0 = &mmuart0; + serial1 = &mmuart1; + serial2 = &mmuart2; + serial3 = &mmuart3; + serial4 = &mmuart4; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + cpus { + timebase-frequency = <RTCCLK_FREQ>; + }; + + ddrc_cache_lo: memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; + status = "okay"; + }; + + ddrc_cache_hi: memory@1000000000 { + device_type = "memory"; + reg = <0x10 0x40000000 0x0 0x40000000>; + status = "okay"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hss_payload: region@BFC00000 { + reg = <0x0 0xBFC00000 0x0 0x400000>; + no-map; + }; + }; +}; + +&core_pwm0 { + status = "okay"; +}; + +&gpio2 { + interrupts = <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&mac0 { + phy-mode = "sgmii"; + phy-handle = <&phy0>; + status = "okay"; +}; + +&mac1 { + phy-mode = "sgmii"; + phy-handle = <&phy1>; + status = "okay"; + + phy1: ethernet-phy@9 { + reg = <9>; + }; + + phy0: ethernet-phy@8 { + reg = <8>; + }; +}; + +&mbox { + status = "okay"; +}; + +&mmc { + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&mmuart1 { + status = "okay"; +}; + +&mmuart2 { + status = "okay"; +}; + +&mmuart3 { + status = "okay"; +}; + +&mmuart4 { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&qspi { + status = "okay"; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&rtc { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi new file mode 100644 index 000000000000..7b9ee13b6a3a --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2022 Microchip Technology Inc */ + +/ { + fabric_clk3: fabric-clk3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <62500000>; + }; + + fabric_clk1: fabric-clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + pcie: pcie@2000000000 { + compatible = "microchip,pcie-host-1.0"; + #address-cells = <0x3>; + #interrupt-cells = <0x1>; + #size-cells = <0x2>; + device_type = "pci"; + reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; + reg-names = "cfg", "apb"; + bus-range = <0x0 0x7f>; + interrupt-parent = <&plic>; + interrupts = <119>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + interrupt-map-mask = <0 0 0 7>; + clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>; + clock-names = "fic0", "fic1", "fic3"; + ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; + msi-parent = <&pcie>; + msi-controller; + status = "disabled"; + pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts new file mode 100644 index 000000000000..184cb36a175e --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts @@ -0,0 +1,179 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Original all-in-one devicetree: + * Copyright (C) 2021-2022 - Wolfgang Grandegger <wg@aries-embedded.de> + * Rewritten to use includes: + * Copyright (C) 2022 - Conor Dooley <conor.dooley@microchip.com> + */ +/dts-v1/; + +#include "mpfs.dtsi" +#include "mpfs-m100pfs-fabric.dtsi" + +/* Clock frequency (in Hz) of the rtcclk */ +#define MTIMER_FREQ 1000000 + +/ { + model = "Aries Embedded M100PFEVPS"; + compatible = "aries,m100pfsevp", "microchip,mpfs"; + + aliases { + ethernet0 = &mac0; + ethernet1 = &mac1; + serial0 = &mmuart0; + serial1 = &mmuart1; + serial2 = &mmuart2; + serial3 = &mmuart3; + serial4 = &mmuart4; + gpio0 = &gpio0; + gpio1 = &gpio2; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + cpus { + timebase-frequency = <MTIMER_FREQ>; + }; + + ddrc_cache_lo: memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; + }; + ddrc_cache_hi: memory@1040000000 { + device_type = "memory"; + reg = <0x10 0x40000000 0x0 0x40000000>; + }; +}; + +&can0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&gpio0 { + interrupts = <13>, <14>, <15>, <16>, + <17>, <18>, <19>, <20>, + <21>, <22>, <23>, <24>, + <25>, <26>; + ngpios = <14>; + status = "okay"; + + pmic-irq-hog { + gpio-hog; + gpios = <13 0>; + input; + }; + + /* Set to low for eMMC, high for SD-card */ + mmc-sel-hog { + gpio-hog; + gpios = <12 0>; + output-high; + }; +}; + +&gpio2 { + interrupts = <13>, <14>, <15>, <16>, + <17>, <18>, <19>, <20>, + <21>, <22>, <23>, <24>, + <25>, <26>, <27>, <28>, + <29>, <30>, <31>, <32>, + <33>, <34>, <35>, <36>, + <37>, <38>, <39>, <40>, + <41>, <42>, <43>, <44>; + status = "okay"; +}; + +&mac0 { + status = "okay"; + phy-mode = "gmii"; + phy-handle = <&phy0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&mac1 { + status = "okay"; + phy-mode = "gmii"; + phy-handle = <&phy1>; + phy1: ethernet-phy@0 { + reg = <0>; + }; +}; + +&mbox { + status = "okay"; +}; + +&mmc { + max-frequency = <50000000>; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + no-1-8-v; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + disable-wp; + status = "okay"; +}; + +&mmuart1 { + status = "okay"; +}; + +&mmuart2 { + status = "okay"; +}; + +&mmuart3 { + status = "okay"; +}; + +&mmuart4 { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&qspi { + status = "okay"; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&rtc { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi new file mode 100644 index 000000000000..67303bc0e451 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2022 Microchip Technology Inc */ + +/ { + fabric_clk3: fabric-clk3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <62500000>; + }; + + fabric_clk1: fabric-clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + pcie: pcie@2000000000 { + compatible = "microchip,pcie-host-1.0"; + #address-cells = <0x3>; + #interrupt-cells = <0x1>; + #size-cells = <0x2>; + device_type = "pci"; + reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; + reg-names = "cfg", "apb"; + bus-range = <0x0 0x7f>; + interrupt-parent = <&plic>; + interrupts = <119>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + interrupt-map-mask = <0 0 0 7>; + clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>; + clock-names = "fic0", "fic1", "fic3"; + ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; + msi-parent = <&pcie>; + msi-controller; + status = "disabled"; + pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts b/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts new file mode 100644 index 000000000000..c87cc2d8fe29 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2022 Microchip Technology Inc */ + +/dts-v1/; + +#include "mpfs.dtsi" +#include "mpfs-polarberry-fabric.dtsi" + +/* Clock frequency (in Hz) of the rtcclk */ +#define MTIMER_FREQ 1000000 + +/ { + model = "Sundance PolarBerry"; + compatible = "sundance,polarberry", "microchip,mpfs"; + + aliases { + ethernet0 = &mac1; + serial0 = &mmuart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + timebase-frequency = <MTIMER_FREQ>; + }; + + ddrc_cache_lo: memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x2e000000>; + }; + + ddrc_cache_hi: memory@1000000000 { + device_type = "memory"; + reg = <0x10 0x00000000 0x0 0xC0000000>; + }; +}; + +/* + * phy0 is connected to mac0, but the port itself is on the (optional) carrier + * board. + */ +&mac0 { + phy-mode = "sgmii"; + phy-handle = <&phy0>; + status = "disabled"; +}; + +&mac1 { + phy-mode = "sgmii"; + phy-handle = <&phy1>; + status = "okay"; + + phy1: ethernet-phy@5 { + reg = <5>; + }; + + phy0: ethernet-phy@4 { + reg = <4>; + }; +}; + +&mbox { + status = "okay"; +}; + +&mmc { + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&mmuart0 { + status = "okay"; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&rtc { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi new file mode 100644 index 000000000000..8545baf4d129 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2022 Microchip Technology Inc */ + +/ { + fabric_clk3: fabric-clk3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + fabric_clk1: fabric-clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + pcie: pcie@2000000000 { + compatible = "microchip,pcie-host-1.0"; + #address-cells = <0x3>; + #interrupt-cells = <0x1>; + #size-cells = <0x2>; + device_type = "pci"; + reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; + reg-names = "cfg", "apb"; + bus-range = <0x0 0x7f>; + interrupt-parent = <&plic>; + interrupts = <119>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + interrupt-map-mask = <0 0 0 7>; + clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>; + clock-names = "fic0", "fic1", "fic3"; + ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; + msi-parent = <&pcie>; + msi-controller; + status = "disabled"; + pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts new file mode 100644 index 000000000000..013cb666c72d --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2022 Microchip Technology Inc */ + +/dts-v1/; + +#include "mpfs.dtsi" +#include "mpfs-sev-kit-fabric.dtsi" + +/* Clock frequency (in Hz) of the rtcclk */ +#define MTIMER_FREQ 1000000 + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Microchip PolarFire-SoC SEV Kit"; + compatible = "microchip,mpfs-sev-kit", "microchip,mpfs"; + + aliases { + ethernet0 = &mac1; + serial0 = &mmuart0; + serial1 = &mmuart1; + serial2 = &mmuart2; + serial3 = &mmuart3; + serial4 = &mmuart4; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + cpus { + timebase-frequency = <MTIMER_FREQ>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + fabricbuf0ddrc: buffer@80000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x80000000 0x0 0x2000000>; + }; + + fabricbuf1ddrnc: buffer@c4000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xc4000000 0x0 0x4000000>; + }; + + fabricbuf2ddrncwcb: buffer@d4000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xd4000000 0x0 0x4000000>; + }; + }; + + ddrc_cache: memory@1000000000 { + device_type = "memory"; + reg = <0x10 0x0 0x0 0x76000000>; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&gpio2 { + interrupts = <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>; + status = "okay"; +}; + +&mac0 { + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&phy0>; + phy1: ethernet-phy@9 { + reg = <9>; + }; + phy0: ethernet-phy@8 { + reg = <8>; + }; +}; + +&mac1 { + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&phy1>; +}; + +&mbox { + status = "okay"; +}; + +&mmc { + status = "okay"; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; +}; + +&mmuart1 { + status = "okay"; +}; + +&mmuart2 { + status = "okay"; +}; + +&mmuart3 { + status = "okay"; +}; + +&mmuart4 { + status = "okay"; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&rtc { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; + +&usb { + status = "okay"; + dr_mode = "otg"; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi new file mode 100644 index 000000000000..8f463399a568 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi @@ -0,0 +1,476 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +/dts-v1/; +#include "dt-bindings/clock/microchip,mpfs-clock.h" + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Microchip PolarFire SoC"; + compatible = "microchip,mpfs"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "sifive,e51", "sifive,rocket0", "riscv"; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <128>; + i-cache-size = <16384>; + reg = <0>; + riscv,isa = "rv64imac"; + clocks = <&clkcfg CLK_CPU>; + status = "disabled"; + + cpu0_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu1: cpu@1 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <1>; + riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + next-level-cache = <&cctrllr>; + status = "okay"; + + cpu1_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu2: cpu@2 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <2>; + riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + next-level-cache = <&cctrllr>; + status = "okay"; + + cpu2_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu3: cpu@3 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <3>; + riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + next-level-cache = <&cctrllr>; + status = "okay"; + + cpu3_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu4: cpu@4 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <4>; + riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + next-level-cache = <&cctrllr>; + status = "okay"; + cpu4_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + }; + }; + }; + + refclk: mssrefclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + syscontroller: syscontroller { + compatible = "microchip,mpfs-sys-controller"; + mboxes = <&mbox 0>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + cctrllr: cache-controller@2010000 { + compatible = "microchip,mpfs-ccache", "sifive,fu540-c000-ccache", "cache"; + reg = <0x0 0x2010000 0x0 0x1000>; + cache-block-size = <64>; + cache-level = <2>; + cache-sets = <1024>; + cache-size = <2097152>; + cache-unified; + interrupt-parent = <&plic>; + interrupts = <1>, <3>, <4>, <2>; + }; + + clint: clint@2000000 { + compatible = "sifive,fu540-c000-clint", "sifive,clint0"; + reg = <0x0 0x2000000 0x0 0xC000>; + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, + <&cpu1_intc 3>, <&cpu1_intc 7>, + <&cpu2_intc 3>, <&cpu2_intc 7>, + <&cpu3_intc 3>, <&cpu3_intc 7>, + <&cpu4_intc 3>, <&cpu4_intc 7>; + }; + + plic: interrupt-controller@c000000 { + compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0"; + reg = <0x0 0xc000000 0x0 0x4000000>; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts-extended = <&cpu0_intc 11>, + <&cpu1_intc 11>, <&cpu1_intc 9>, + <&cpu2_intc 11>, <&cpu2_intc 9>, + <&cpu3_intc 11>, <&cpu3_intc 9>, + <&cpu4_intc 11>, <&cpu4_intc 9>; + riscv,ndev = <186>; + }; + + pdma: dma-controller@3000000 { + compatible = "sifive,fu540-c000-pdma", "sifive,pdma0"; + reg = <0x0 0x3000000 0x0 0x8000>; + interrupt-parent = <&plic>; + interrupts = <5 6>, <7 8>, <9 10>, <11 12>; + dma-channels = <4>; + #dma-cells = <1>; + }; + + clkcfg: clkcfg@20002000 { + compatible = "microchip,mpfs-clkcfg"; + reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>; + clocks = <&refclk>; + #clock-cells = <1>; + }; + + mmuart0: serial@20000000 { + compatible = "ns16550a"; + reg = <0x0 0x20000000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <90>; + current-speed = <115200>; + clocks = <&clkcfg CLK_MMUART0>; + status = "disabled"; /* Reserved for the HSS */ + }; + + mmuart1: serial@20100000 { + compatible = "ns16550a"; + reg = <0x0 0x20100000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <91>; + current-speed = <115200>; + clocks = <&clkcfg CLK_MMUART1>; + status = "disabled"; + }; + + mmuart2: serial@20102000 { + compatible = "ns16550a"; + reg = <0x0 0x20102000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <92>; + current-speed = <115200>; + clocks = <&clkcfg CLK_MMUART2>; + status = "disabled"; + }; + + mmuart3: serial@20104000 { + compatible = "ns16550a"; + reg = <0x0 0x20104000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <93>; + current-speed = <115200>; + clocks = <&clkcfg CLK_MMUART3>; + status = "disabled"; + }; + + mmuart4: serial@20106000 { + compatible = "ns16550a"; + reg = <0x0 0x20106000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <94>; + clocks = <&clkcfg CLK_MMUART4>; + current-speed = <115200>; + status = "disabled"; + }; + + /* Common node entry for emmc/sd */ + mmc: mmc@20008000 { + compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc"; + reg = <0x0 0x20008000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <88>; + clocks = <&clkcfg CLK_MMC>; + max-frequency = <200000000>; + status = "disabled"; + }; + + spi0: spi@20108000 { + compatible = "microchip,mpfs-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20108000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <54>; + clocks = <&clkcfg CLK_SPI0>; + status = "disabled"; + }; + + spi1: spi@20109000 { + compatible = "microchip,mpfs-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20109000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <55>; + clocks = <&clkcfg CLK_SPI1>; + status = "disabled"; + }; + + qspi: spi@21000000 { + compatible = "microchip,mpfs-qspi", "microchip,coreqspi-rtl-v2"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x21000000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <85>; + clocks = <&clkcfg CLK_QSPI>; + status = "disabled"; + }; + + i2c0: i2c@2010a000 { + compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7"; + reg = <0x0 0x2010a000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <58>; + clocks = <&clkcfg CLK_I2C0>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@2010b000 { + compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7"; + reg = <0x0 0x2010b000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <61>; + clocks = <&clkcfg CLK_I2C1>; + clock-frequency = <100000>; + status = "disabled"; + }; + + can0: can@2010c000 { + compatible = "microchip,mpfs-can"; + reg = <0x0 0x2010c000 0x0 0x1000>; + clocks = <&clkcfg CLK_CAN0>; + interrupt-parent = <&plic>; + interrupts = <56>; + status = "disabled"; + }; + + can1: can@2010d000 { + compatible = "microchip,mpfs-can"; + reg = <0x0 0x2010d000 0x0 0x1000>; + clocks = <&clkcfg CLK_CAN1>; + interrupt-parent = <&plic>; + interrupts = <57>; + status = "disabled"; + }; + + mac0: ethernet@20110000 { + compatible = "cdns,macb"; + reg = <0x0 0x20110000 0x0 0x2000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <64>, <65>, <66>, <67>, <68>, <69>; + local-mac-address = [00 00 00 00 00 00]; + clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>; + clock-names = "pclk", "hclk"; + status = "disabled"; + }; + + mac1: ethernet@20112000 { + compatible = "cdns,macb"; + reg = <0x0 0x20112000 0x0 0x2000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <70>, <71>, <72>, <73>, <74>, <75>; + local-mac-address = [00 00 00 00 00 00]; + clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>; + clock-names = "pclk", "hclk"; + status = "disabled"; + }; + + gpio0: gpio@20120000 { + compatible = "microchip,mpfs-gpio"; + reg = <0x0 0x20120000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&clkcfg CLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + gpio1: gpio@20121000 { + compatible = "microchip,mpfs-gpio"; + reg = <0x0 0x20121000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&clkcfg CLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + gpio2: gpio@20122000 { + compatible = "microchip,mpfs-gpio"; + reg = <0x0 0x20122000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&clkcfg CLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + rtc: rtc@20124000 { + compatible = "microchip,mpfs-rtc"; + reg = <0x0 0x20124000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <80>, <81>; + clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>; + clock-names = "rtc", "rtcref"; + status = "disabled"; + }; + + usb: usb@20201000 { + compatible = "microchip,mpfs-musb"; + reg = <0x0 0x20201000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <86>, <87>; + clocks = <&clkcfg CLK_USB>; + interrupt-names = "dma","mc"; + status = "disabled"; + }; + + mbox: mailbox@37020000 { + compatible = "microchip,mpfs-mailbox"; + reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318C 0x0 0x40>; + interrupt-parent = <&plic>; + interrupts = <96>; + #mbox-cells = <1>; + status = "disabled"; + }; + }; +}; diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi index 0655b5c4201d..24bba83bec77 100644 --- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi +++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi @@ -133,24 +133,49 @@ interrupt-controller; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + }; + }; }; soc { #address-cells = <2>; #size-cells = <2>; - compatible = "sifive,fu540-c000", "sifive,fu540", "simple-bus"; + compatible = "simple-bus"; ranges; plic0: interrupt-controller@c000000 { - #interrupt-cells = <1>; compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0"; reg = <0x0 0xc000000 0x0 0x4000000>; - riscv,ndev = <53>; + #address-cells = <0>; + #interrupt-cells = <1>; interrupt-controller; - interrupts-extended = < - &cpu0_intc 0xffffffff - &cpu1_intc 0xffffffff &cpu1_intc 9 - &cpu2_intc 0xffffffff &cpu2_intc 9 - &cpu3_intc 0xffffffff &cpu3_intc 9 - &cpu4_intc 0xffffffff &cpu4_intc 9>; + interrupts-extended = + <&cpu0_intc 0xffffffff>, + <&cpu1_intc 0xffffffff>, <&cpu1_intc 9>, + <&cpu2_intc 0xffffffff>, <&cpu2_intc 9>, + <&cpu3_intc 0xffffffff>, <&cpu3_intc 9>, + <&cpu4_intc 0xffffffff>, <&cpu4_intc 9>; + riscv,ndev = <53>; }; prci: clock-controller@10000000 { compatible = "sifive,fu540-c000-prci"; @@ -163,14 +188,16 @@ reg = <0x0 0x10010000 0x0 0x1000>; interrupt-parent = <&plic0>; interrupts = <4>; - clocks = <&prci PRCI_CLK_TLCLK>; + clocks = <&prci FU540_PRCI_CLK_TLCLK>; status = "disabled"; }; - dma: dma@3000000 { - compatible = "sifive,fu540-c000-pdma"; + dma: dma-controller@3000000 { + compatible = "sifive,fu540-c000-pdma", "sifive,pdma0"; reg = <0x0 0x3000000 0x0 0x8000>; interrupt-parent = <&plic0>; - interrupts = <23 24 25 26 27 28 29 30>; + interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>, + <30>; + dma-channels = <4>; #dma-cells = <1>; }; uart1: serial@10011000 { @@ -178,7 +205,7 @@ reg = <0x0 0x10011000 0x0 0x1000>; interrupt-parent = <&plic0>; interrupts = <5>; - clocks = <&prci PRCI_CLK_TLCLK>; + clocks = <&prci FU540_PRCI_CLK_TLCLK>; status = "disabled"; }; i2c0: i2c@10030000 { @@ -186,7 +213,7 @@ reg = <0x0 0x10030000 0x0 0x1000>; interrupt-parent = <&plic0>; interrupts = <50>; - clocks = <&prci PRCI_CLK_TLCLK>; + clocks = <&prci FU540_PRCI_CLK_TLCLK>; reg-shift = <2>; reg-io-width = <1>; #address-cells = <1>; @@ -195,22 +222,22 @@ }; qspi0: spi@10040000 { compatible = "sifive,fu540-c000-spi", "sifive,spi0"; - reg = <0x0 0x10040000 0x0 0x1000 - 0x0 0x20000000 0x0 0x10000000>; + reg = <0x0 0x10040000 0x0 0x1000>, + <0x0 0x20000000 0x0 0x10000000>; interrupt-parent = <&plic0>; interrupts = <51>; - clocks = <&prci PRCI_CLK_TLCLK>; + clocks = <&prci FU540_PRCI_CLK_TLCLK>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; qspi1: spi@10041000 { compatible = "sifive,fu540-c000-spi", "sifive,spi0"; - reg = <0x0 0x10041000 0x0 0x1000 - 0x0 0x30000000 0x0 0x10000000>; + reg = <0x0 0x10041000 0x0 0x1000>, + <0x0 0x30000000 0x0 0x10000000>; interrupt-parent = <&plic0>; interrupts = <52>; - clocks = <&prci PRCI_CLK_TLCLK>; + clocks = <&prci FU540_PRCI_CLK_TLCLK>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -220,7 +247,7 @@ reg = <0x0 0x10050000 0x0 0x1000>; interrupt-parent = <&plic0>; interrupts = <6>; - clocks = <&prci PRCI_CLK_TLCLK>; + clocks = <&prci FU540_PRCI_CLK_TLCLK>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -229,12 +256,12 @@ compatible = "sifive,fu540-c000-gem"; interrupt-parent = <&plic0>; interrupts = <53>; - reg = <0x0 0x10090000 0x0 0x2000 - 0x0 0x100a0000 0x0 0x1000>; + reg = <0x0 0x10090000 0x0 0x2000>, + <0x0 0x100a0000 0x0 0x1000>; local-mac-address = [00 00 00 00 00 00]; clock-names = "pclk", "hclk"; - clocks = <&prci PRCI_CLK_GEMGXLPLL>, - <&prci PRCI_CLK_GEMGXLPLL>; + clocks = <&prci FU540_PRCI_CLK_GEMGXLPLL>, + <&prci FU540_PRCI_CLK_GEMGXLPLL>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -243,8 +270,8 @@ compatible = "sifive,fu540-c000-pwm", "sifive,pwm0"; reg = <0x0 0x10020000 0x0 0x1000>; interrupt-parent = <&plic0>; - interrupts = <42 43 44 45>; - clocks = <&prci PRCI_CLK_TLCLK>; + interrupts = <42>, <43>, <44>, <45>; + clocks = <&prci FU540_PRCI_CLK_TLCLK>; #pwm-cells = <3>; status = "disabled"; }; @@ -252,8 +279,8 @@ compatible = "sifive,fu540-c000-pwm", "sifive,pwm0"; reg = <0x0 0x10021000 0x0 0x1000>; interrupt-parent = <&plic0>; - interrupts = <46 47 48 49>; - clocks = <&prci PRCI_CLK_TLCLK>; + interrupts = <46>, <47>, <48>, <49>; + clocks = <&prci FU540_PRCI_CLK_TLCLK>; #pwm-cells = <3>; status = "disabled"; }; @@ -265,7 +292,7 @@ cache-size = <2097152>; cache-unified; interrupt-parent = <&plic0>; - interrupts = <1 2 3>; + interrupts = <1>, <2>, <3>; reg = <0x0 0x2010000 0x0 0x1000>; }; gpio: gpio@10060000 { @@ -279,7 +306,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&prci PRCI_CLK_TLCLK>; + clocks = <&prci FU540_PRCI_CLK_TLCLK>; status = "disabled"; }; }; diff --git a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi index abbb960f90a0..43bed6c0a84f 100644 --- a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi +++ b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi @@ -134,6 +134,30 @@ interrupt-controller; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + }; + }; }; soc { #address-cells = <2>; @@ -147,12 +171,12 @@ reg = <0x0 0xc000000 0x0 0x4000000>; riscv,ndev = <69>; interrupt-controller; - interrupts-extended = < - &cpu0_intc 0xffffffff - &cpu1_intc 0xffffffff &cpu1_intc 9 - &cpu2_intc 0xffffffff &cpu2_intc 9 - &cpu3_intc 0xffffffff &cpu3_intc 9 - &cpu4_intc 0xffffffff &cpu4_intc 9>; + interrupts-extended = + <&cpu0_intc 0xffffffff>, + <&cpu1_intc 0xffffffff>, <&cpu1_intc 9>, + <&cpu2_intc 0xffffffff>, <&cpu2_intc 9>, + <&cpu3_intc 0xffffffff>, <&cpu3_intc 9>, + <&cpu4_intc 0xffffffff>, <&cpu4_intc 9>; }; prci: clock-controller@10000000 { compatible = "sifive,fu740-c000-prci"; @@ -166,7 +190,7 @@ reg = <0x0 0x10010000 0x0 0x1000>; interrupt-parent = <&plic0>; interrupts = <39>; - clocks = <&prci PRCI_CLK_PCLK>; + clocks = <&prci FU740_PRCI_CLK_PCLK>; status = "disabled"; }; uart1: serial@10011000 { @@ -174,7 +198,7 @@ reg = <0x0 0x10011000 0x0 0x1000>; interrupt-parent = <&plic0>; interrupts = <40>; - clocks = <&prci PRCI_CLK_PCLK>; + clocks = <&prci FU740_PRCI_CLK_PCLK>; status = "disabled"; }; i2c0: i2c@10030000 { @@ -182,7 +206,7 @@ reg = <0x0 0x10030000 0x0 0x1000>; interrupt-parent = <&plic0>; interrupts = <52>; - clocks = <&prci PRCI_CLK_PCLK>; + clocks = <&prci FU740_PRCI_CLK_PCLK>; reg-shift = <2>; reg-io-width = <1>; #address-cells = <1>; @@ -194,7 +218,7 @@ reg = <0x0 0x10031000 0x0 0x1000>; interrupt-parent = <&plic0>; interrupts = <53>; - clocks = <&prci PRCI_CLK_PCLK>; + clocks = <&prci FU740_PRCI_CLK_PCLK>; reg-shift = <2>; reg-io-width = <1>; #address-cells = <1>; @@ -207,7 +231,7 @@ <0x0 0x20000000 0x0 0x10000000>; interrupt-parent = <&plic0>; interrupts = <41>; - clocks = <&prci PRCI_CLK_PCLK>; + clocks = <&prci FU740_PRCI_CLK_PCLK>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -218,7 +242,7 @@ <0x0 0x30000000 0x0 0x10000000>; interrupt-parent = <&plic0>; interrupts = <42>; - clocks = <&prci PRCI_CLK_PCLK>; + clocks = <&prci FU740_PRCI_CLK_PCLK>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -228,7 +252,7 @@ reg = <0x0 0x10050000 0x0 0x1000>; interrupt-parent = <&plic0>; interrupts = <43>; - clocks = <&prci PRCI_CLK_PCLK>; + clocks = <&prci FU740_PRCI_CLK_PCLK>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -241,8 +265,8 @@ <0x0 0x100a0000 0x0 0x1000>; local-mac-address = [00 00 00 00 00 00]; clock-names = "pclk", "hclk"; - clocks = <&prci PRCI_CLK_GEMGXLPLL>, - <&prci PRCI_CLK_GEMGXLPLL>; + clocks = <&prci FU740_PRCI_CLK_GEMGXLPLL>, + <&prci FU740_PRCI_CLK_GEMGXLPLL>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -252,7 +276,7 @@ reg = <0x0 0x10020000 0x0 0x1000>; interrupt-parent = <&plic0>; interrupts = <44>, <45>, <46>, <47>; - clocks = <&prci PRCI_CLK_PCLK>; + clocks = <&prci FU740_PRCI_CLK_PCLK>; #pwm-cells = <3>; status = "disabled"; }; @@ -261,7 +285,7 @@ reg = <0x0 0x10021000 0x0 0x1000>; interrupt-parent = <&plic0>; interrupts = <48>, <49>, <50>, <51>; - clocks = <&prci PRCI_CLK_PCLK>; + clocks = <&prci FU740_PRCI_CLK_PCLK>; #pwm-cells = <3>; status = "disabled"; }; @@ -273,7 +297,7 @@ cache-size = <2097152>; cache-unified; interrupt-parent = <&plic0>; - interrupts = <19 21 22 20>; + interrupts = <19>, <21>, <22>, <20>; reg = <0x0 0x2010000 0x0 0x1000>; }; gpio: gpio@10060000 { @@ -287,7 +311,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&prci PRCI_CLK_PCLK>; + clocks = <&prci FU740_PRCI_CLK_PCLK>; status = "disabled"; }; pcie@e00000000 { @@ -316,7 +340,7 @@ <0x0 0x0 0x0 0x3 &plic0 59>, <0x0 0x0 0x0 0x4 &plic0 60>; clock-names = "pcie_aux"; - clocks = <&prci PRCI_CLK_PCIE_AUX>; + clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>; pwren-gpios = <&gpio 5 0>; reset-gpios = <&gpio 8 0>; resets = <&prci 4>; diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts index ba304d4c455c..900a50526d77 100644 --- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts @@ -3,6 +3,8 @@ #include "fu540-c000.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pwm/pwm.h> /* Clock frequency (in Hz) of the PCB crystal for rtcclk */ #define RTCCLK_FREQ 1000000 @@ -42,6 +44,42 @@ compatible = "gpio-restart"; gpios = <&gpio 10 GPIO_ACTIVE_LOW>; }; + + led-controller { + compatible = "pwm-leds"; + + led-d1 { + pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>; + active-low; + color = <LED_COLOR_ID_GREEN>; + max-brightness = <255>; + label = "d1"; + }; + + led-d2 { + pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>; + active-low; + color = <LED_COLOR_ID_GREEN>; + max-brightness = <255>; + label = "d2"; + }; + + led-d3 { + pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>; + active-low; + color = <LED_COLOR_ID_GREEN>; + max-brightness = <255>; + label = "d3"; + }; + + led-d4 { + pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>; + active-low; + color = <LED_COLOR_ID_GREEN>; + max-brightness = <255>; + label = "d4"; + }; + }; }; &uart0 { @@ -76,6 +114,7 @@ spi-max-frequency = <20000000>; voltage-ranges = <3300 3300>; disable-wp; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts index 4f66919215f6..07387f9c135c 100644 --- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts +++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts @@ -2,7 +2,10 @@ /* Copyright (c) 2020 SiFive, Inc */ #include "fu740-c000.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pwm/pwm.h> /* Clock frequency (in Hz) of the PCB crystal for rtcclk */ #define RTCCLK_FREQ 1000000 @@ -38,6 +41,51 @@ clock-frequency = <RTCCLK_FREQ>; clock-output-names = "rtcclk"; }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + + led-controller-1 { + compatible = "pwm-leds"; + + led-d12 { + pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>; + active-low; + color = <LED_COLOR_ID_GREEN>; + max-brightness = <255>; + label = "d12"; + }; + }; + + led-controller-2 { + compatible = "pwm-leds-multicolor"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + max-brightness = <255>; + label = "d2"; + + led-red { + pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>; + active-low; + color = <LED_COLOR_ID_RED>; + }; + + led-green { + pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>; + active-low; + color = <LED_COLOR_ID_GREEN>; + }; + + led-blue { + pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>; + active-low; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; }; &uart0 { @@ -54,10 +102,21 @@ temperature-sensor@4c { compatible = "ti,tmp451"; reg = <0x4c>; + vcc-supply = <&vdd_bpro>; interrupt-parent = <&gpio>; interrupts = <6 IRQ_TYPE_LEVEL_LOW>; }; + eeprom@54 { + compatible = "microchip,24c02", "atmel,24c02"; + reg = <0x54>; + vcc-supply = <&vdd_bpro>; + label = "board-id"; + pagesize = <16>; + read-only; + size = <256>; + }; + pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; @@ -65,48 +124,44 @@ interrupts = <1 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; - regulators { - vdd_bcore1: bcore1 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-min-microamp = <5000000>; - regulator-max-microamp = <5000000>; - regulator-always-on; - }; + onkey { + compatible = "dlg,da9063-onkey"; + }; + + rtc { + compatible = "dlg,da9063-rtc"; + }; - vdd_bcore2: bcore2 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-min-microamp = <5000000>; - regulator-max-microamp = <5000000>; + watchdog { + compatible = "dlg,da9063-watchdog"; + }; + + regulators { + vdd_bcore: bcores-merged { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-min-microamp = <4800000>; + regulator-max-microamp = <4800000>; regulator-always-on; }; vdd_bpro: bpro { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-min-microamp = <2500000>; - regulator-max-microamp = <2500000>; + regulator-min-microamp = <2400000>; + regulator-max-microamp = <2400000>; regulator-always-on; }; vdd_bperi: bperi { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <1060000>; + regulator-max-microvolt = <1060000>; regulator-min-microamp = <1500000>; regulator-max-microamp = <1500000>; regulator-always-on; }; - vdd_bmem: bmem { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-min-microamp = <3000000>; - regulator-max-microamp = <3000000>; - regulator-always-on; - }; - - vdd_bio: bio { + vdd_bmem_bio: bmem-bio-merged { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-min-microamp = <3000000>; @@ -117,86 +172,66 @@ vdd_ldo1: ldo1 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-min-microamp = <100000>; - regulator-max-microamp = <100000>; regulator-always-on; }; vdd_ldo2: ldo2 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-min-microamp = <200000>; - regulator-max-microamp = <200000>; regulator-always-on; }; vdd_ldo3: ldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-min-microamp = <200000>; - regulator-max-microamp = <200000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; vdd_ldo4: ldo4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-min-microamp = <200000>; - regulator-max-microamp = <200000>; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; regulator-always-on; }; vdd_ldo5: ldo5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-min-microamp = <100000>; - regulator-max-microamp = <100000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; vdd_ldo6: ldo6 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-min-microamp = <200000>; - regulator-max-microamp = <200000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-always-on; }; vdd_ldo7: ldo7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-min-microamp = <200000>; - regulator-max-microamp = <200000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; vdd_ldo8: ldo8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-min-microamp = <200000>; - regulator-max-microamp = <200000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; vdd_ld09: ldo9 { regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; - regulator-min-microamp = <200000>; - regulator-max-microamp = <200000>; + regulator-always-on; }; vdd_ldo10: ldo10 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; - regulator-min-microamp = <300000>; - regulator-max-microamp = <300000>; + regulator-always-on; }; vdd_ldo11: ldo11 { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; - regulator-min-microamp = <300000>; - regulator-max-microamp = <300000>; regulator-always-on; }; }; @@ -223,6 +258,7 @@ spi-max-frequency = <20000000>; voltage-ranges = <3300 3300>; disable-wp; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; }; @@ -245,4 +281,8 @@ &gpio { status = "okay"; + gpio-line-names = "J29.1", "PMICNTB", "PMICSHDN", "J8.1", "J8.3", + "PCIe_PWREN", "THERM", "UBRDG_RSTN", "PCIe_PERSTN", + "ULPI_RSTN", "J8.2", "UHUB_RSTN", "GEMGXL_RST", "J8.4", + "EN_VDD_SD", "SD_CD"; }; diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile new file mode 100644 index 000000000000..0ea1bc15ab30 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts new file mode 100644 index 000000000000..f7a230110512 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2021 StarFive Technology Co., Ltd. + * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include "jh7100.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/pinctrl-starfive-jh7100.h> + +/ { + model = "BeagleV Starlight Beta"; + compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100"; + + aliases { + serial0 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + timebase-frequency = <6250000>; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x2 0x0>; + }; + + leds { + compatible = "gpio-leds"; + + led-ack { + gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + linux,default-trigger = "heartbeat"; + label = "ack"; + }; + }; +}; + +&gpio { + i2c0_pins: i2c0-0 { + i2c-pins { + pinmux = <GPIOMUX(62, GPO_LOW, + GPO_I2C0_PAD_SCK_OEN, + GPI_I2C0_PAD_SCK_IN)>, + <GPIOMUX(61, GPO_LOW, + GPO_I2C0_PAD_SDA_OEN, + GPI_I2C0_PAD_SDA_IN)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c1_pins: i2c1-0 { + i2c-pins { + pinmux = <GPIOMUX(47, GPO_LOW, + GPO_I2C1_PAD_SCK_OEN, + GPI_I2C1_PAD_SCK_IN)>, + <GPIOMUX(48, GPO_LOW, + GPO_I2C1_PAD_SDA_OEN, + GPI_I2C1_PAD_SDA_IN)>; + bias-pull-up; + input-enable; + input-schmitt-enable; + }; + }; + + i2c2_pins: i2c2-0 { + i2c-pins { + pinmux = <GPIOMUX(60, GPO_LOW, + GPO_I2C2_PAD_SCK_OEN, + GPI_I2C2_PAD_SCK_IN)>, + <GPIOMUX(59, GPO_LOW, + GPO_I2C2_PAD_SDA_OEN, + GPI_I2C2_PAD_SDA_IN)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + uart3_pins: uart3-0 { + rx-pins { + pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE, + GPI_UART3_PAD_SIN)>; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + tx-pins { + pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT, + GPO_ENABLE, GPI_NONE)>; + bias-disable; + drive-strength = <35>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <500>; + i2c-scl-falling-time-ns = <500>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + pmic@5e { + compatible = "ti,tps65086"; + reg = <0x5e>; + gpio-controller; + #gpio-cells = <2>; + + regulators { + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <100>; + i2c-scl-falling-time-ns = <100>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <500>; + i2c-scl-falling-time-ns = <500>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; +}; + +&osc_sys { + clock-frequency = <25000000>; +}; + +&osc_aud { + clock-frequency = <27000000>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi new file mode 100644 index 000000000000..000447482aca --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi @@ -0,0 +1,242 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2021 StarFive Technology Co., Ltd. + * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include <dt-bindings/clock/starfive-jh7100.h> +#include <dt-bindings/reset/starfive-jh7100.h> + +/ { + compatible = "starfive,jh7100"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + U74_0: cpu@0 { + compatible = "sifive,u74-mc", "riscv"; + reg = <0>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + riscv,isa = "rv64imafdc"; + tlb-split; + + cpu0_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + U74_1: cpu@1 { + compatible = "sifive,u74-mc", "riscv"; + reg = <1>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + riscv,isa = "rv64imafdc"; + tlb-split; + + cpu1_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&U74_0>; + }; + + core1 { + cpu = <&U74_1>; + }; + }; + }; + }; + + osc_sys: osc_sys { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + osc_aud: osc_aud { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + gmac_rmii_ref: gmac_rmii_ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* Should be overridden by the board when needed */ + clock-frequency = <0>; + }; + + gmac_gr_mii_rxclk: gmac_gr_mii_rxclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* Should be overridden by the board when needed */ + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&plic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clint: clint@2000000 { + compatible = "starfive,jh7100-clint", "sifive,clint0"; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 + &cpu1_intc 3 &cpu1_intc 7>; + }; + + plic: interrupt-controller@c000000 { + compatible = "starfive,jh7100-plic", "sifive,plic-1.0.0"; + reg = <0x0 0xc000000 0x0 0x4000000>; + interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9 + &cpu1_intc 11 &cpu1_intc 9>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + riscv,ndev = <133>; + }; + + clkgen: clock-controller@11800000 { + compatible = "starfive,jh7100-clkgen"; + reg = <0x0 0x11800000 0x0 0x10000>; + clocks = <&osc_sys>, <&osc_aud>, <&gmac_rmii_ref>, <&gmac_gr_mii_rxclk>; + clock-names = "osc_sys", "osc_aud", "gmac_rmii_ref", "gmac_gr_mii_rxclk"; + #clock-cells = <1>; + }; + + rstgen: reset-controller@11840000 { + compatible = "starfive,jh7100-reset"; + reg = <0x0 0x11840000 0x0 0x10000>; + #reset-cells = <1>; + }; + + i2c0: i2c@118b0000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x118b0000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_I2C0_CORE>, + <&clkgen JH7100_CLK_I2C0_APB>; + clock-names = "ref", "pclk"; + resets = <&rstgen JH7100_RSTN_I2C0_APB>; + interrupts = <96>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@118c0000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x118c0000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_I2C1_CORE>, + <&clkgen JH7100_CLK_I2C1_APB>; + clock-names = "ref", "pclk"; + resets = <&rstgen JH7100_RSTN_I2C1_APB>; + interrupts = <97>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + gpio: pinctrl@11910000 { + compatible = "starfive,jh7100-pinctrl"; + reg = <0x0 0x11910000 0x0 0x10000>, + <0x0 0x11858000 0x0 0x1000>; + reg-names = "gpio", "padctl"; + clocks = <&clkgen JH7100_CLK_GPIO_APB>; + resets = <&rstgen JH7100_RSTN_GPIO_APB>; + interrupts = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart2: serial@12430000 { + compatible = "starfive,jh7100-uart", "snps,dw-apb-uart"; + reg = <0x0 0x12430000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_UART2_CORE>, + <&clkgen JH7100_CLK_UART2_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&rstgen JH7100_RSTN_UART2_APB>; + interrupts = <72>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart3: serial@12440000 { + compatible = "starfive,jh7100-uart", "snps,dw-apb-uart"; + reg = <0x0 0x12440000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_UART3_CORE>, + <&clkgen JH7100_CLK_UART3_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&rstgen JH7100_RSTN_UART3_APB>; + interrupts = <73>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + i2c2: i2c@12450000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x12450000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_I2C2_CORE>, + <&clkgen JH7100_CLK_I2C2_APB>; + clock-names = "ref", "pclk"; + resets = <&rstgen JH7100_RSTN_I2C2_APB>; + interrupts = <74>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@12460000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x12460000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_I2C3_CORE>, + <&clkgen JH7100_CLK_I2C3_APB>; + clock-names = "ref", "pclk"; + resets = <&rstgen JH7100_RSTN_I2C3_APB>; + interrupts = <75>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; +}; |