diff options
Diffstat (limited to 'arch/s390/kernel/head31.S')
| -rw-r--r-- | arch/s390/kernel/head31.S | 77 |
1 files changed, 38 insertions, 39 deletions
diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S index 2d3b089bfb83..d00de17b3778 100644 --- a/arch/s390/kernel/head31.S +++ b/arch/s390/kernel/head31.S @@ -1,7 +1,7 @@ /* * arch/s390/kernel/head31.S * - * (C) Copyright IBM Corp. 2005 + * Copyright (C) IBM Corp. 2005,2006 * * Author(s): Hartmut Penner <hp@de.ibm.com> * Martin Schwidefsky <schwidefsky@de.ibm.com> @@ -16,12 +16,31 @@ # or linload or SALIPL # .org 0x10000 -startup:basr %r13,0 # get base -.LPG1: l %r1, .Lget_ipl_device_addr-.LPG1(%r13) - basr %r14, %r1 +startup:basr %r13,0 # get base +.LPG0: l %r13,0f-.LPG0(%r13) + b 0(%r13) +0: .long startup_continue + +# +# params at 10400 (setup.h) +# + .org PARMAREA + .long 0,0 # IPL_DEVICE + .long 0,RAMDISK_ORIGIN # INITRD_START + .long 0,RAMDISK_SIZE # INITRD_SIZE + + .org COMMAND_LINE + .byte "root=/dev/ram0 ro" + .byte 0 + + .org 0x11000 + +startup_continue: + basr %r13,0 # get base +.LPG1: GET_IPL_DEVICE lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers - la %r12,_pstart-.LPG1(%r13) # pointer to parameter area - # move IPL device to lowcore + l %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area + # move IPL device to lowcore mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12) # @@ -51,8 +70,8 @@ startup:basr %r13,0 # get base a %r1,__LC_EXT_NEW_PSW+4 # set handler st %r1,__LC_EXT_NEW_PSW+4 - la %r4,_pstart-.LPG1(%r13) # %r4 is our index for sccb stuff - la %r1, .Lsccb-PARMAREA(%r4) # our sccb + l %r4,.Lsccbaddr-.LPG1(%r13) # %r4 is our index for sccb stuff + lr %r1,%r4 # our sccb .insn rre,0xb2200000,%r2,%r1 # service call ipm %r1 srl %r1,28 # get cc code @@ -63,7 +82,7 @@ startup:basr %r13,0 # get base be .Lservicecall-.LPG1(%r13) lpsw .Lwaitsclp-.LPG1(%r13) .Lsclph: - lh %r1,.Lsccbr-PARMAREA(%r4) + lh %r1,.Lsccbr-.Lsccb(%r4) chi %r1,0x10 # 0x0010 is the sucess code je .Lprocsccb # let's process the sccb chi %r1,0x1f0 @@ -74,7 +93,7 @@ startup:basr %r13,0 # get base b .Lservicecall-.LPG1(%r13) .Lprocsccb: lhi %r1,0 - icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0 + icm %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0 jnz .Lscnd lhi %r1,0x800 # otherwise report 2GB .Lscnd: @@ -84,10 +103,10 @@ startup:basr %r13,0 # get base lr %r1,%r3 .Lno2gb: xr %r3,%r3 # same logic - ic %r3,.Lscpa1-PARMAREA(%r4) + ic %r3,.Lscpa1-.Lsccb(%r4) chi %r3,0x00 jne .Lcompmem - l %r3,.Lscpa2-PARMAREA(%r13) + l %r3,.Lscpa2-.Lsccb(%r4) .Lcompmem: mr %r2,%r1 # mem in MB on 128-bit l %r1,.Lonemb-.LPG1(%r13) @@ -95,8 +114,6 @@ startup:basr %r13,0 # get base b .Lfchunk-.LPG1(%r13) .align 4 -.Lget_ipl_device_addr: - .long .Lget_ipl_device .Lpmask: .byte 0 .align 8 @@ -242,6 +259,8 @@ startup:basr %r13,0 # get base .long 0 # cr13: home space segment table .long 0xc0000000 # cr14: machine check handling off .long 0 # cr15: linkage stack operations +.Lduct: .long 0,0,0,0,0,0,0,0 + .long 0,0,0,0,0,0,0,0 .Lpcmem:.long 0x00080000,0x80000000 + .Lchkmem .Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu .Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp @@ -252,25 +271,9 @@ startup:basr %r13,0 # get base .Lmflags:.long machine_flags .Lbss_bgn: .long __bss_start .Lbss_end: .long _end - - .org PARMAREA-64 -.Lduct: .long 0,0,0,0,0,0,0,0 - .long 0,0,0,0,0,0,0,0 - -# -# params at 10400 (setup.h) -# - .org PARMAREA - .global _pstart -_pstart: - .long 0,0 # IPL_DEVICE - .long 0,RAMDISK_ORIGIN # INITRD_START - .long 0,RAMDISK_SIZE # INITRD_SIZE - - .org COMMAND_LINE - .byte "root=/dev/ram0 ro" - .byte 0 - .org 0x11000 +.Lparmaddr: .long PARMAREA +.Lsccbaddr: .long .Lsccb + .align 4096 .Lsccb: .hword 0x1000 # length, one page .byte 0x00,0x00,0x00 @@ -287,18 +290,14 @@ _pstart: .Lscpincr2: .quad 0x00 .fill 3984,1,0 - .org 0x12000 - .global _pend -_pend: - - GET_IPL_DEVICE + .align 4096 #ifdef CONFIG_SHARED_KERNEL .org 0x100000 #endif # -# startup-code, running in virtual mode +# startup-code, running in absolute addressing mode # .globl _stext _stext: basr %r13,0 # get base |