diff options
Diffstat (limited to 'arch/sh/boards/mach-x3proto')
| -rw-r--r-- | arch/sh/boards/mach-x3proto/Makefile | 2 | ||||
| -rw-r--r-- | arch/sh/boards/mach-x3proto/gpio.c | 135 | ||||
| -rw-r--r-- | arch/sh/boards/mach-x3proto/ilsel.c | 18 | ||||
| -rw-r--r-- | arch/sh/boards/mach-x3proto/setup.c | 132 |
4 files changed, 270 insertions, 17 deletions
diff --git a/arch/sh/boards/mach-x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile index 983e4551fecf..708c21c919ff 100644 --- a/arch/sh/boards/mach-x3proto/Makefile +++ b/arch/sh/boards/mach-x3proto/Makefile @@ -1 +1,3 @@ obj-y += setup.o ilsel.o + +obj-$(CONFIG_GENERIC_GPIO) += gpio.o diff --git a/arch/sh/boards/mach-x3proto/gpio.c b/arch/sh/boards/mach-x3proto/gpio.c new file mode 100644 index 000000000000..594adf76e46a --- /dev/null +++ b/arch/sh/boards/mach-x3proto/gpio.c @@ -0,0 +1,135 @@ +/* + * arch/sh/boards/mach-x3proto/gpio.c + * + * Renesas SH-X3 Prototype Baseboard GPIO Support. + * + * Copyright (C) 2010 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <mach/ilsel.h> +#include <mach/hardware.h> + +#define KEYCTLR 0xb81c0000 +#define KEYOUTR 0xb81c0002 +#define KEYDETR 0xb81c0004 + +static DEFINE_SPINLOCK(x3proto_gpio_lock); +static unsigned int x3proto_gpio_irq_map[NR_BASEBOARD_GPIOS] = { 0, }; + +static int x3proto_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + unsigned long flags; + unsigned int data; + + spin_lock_irqsave(&x3proto_gpio_lock, flags); + data = __raw_readw(KEYCTLR); + data |= (1 << gpio); + __raw_writew(data, KEYCTLR); + spin_unlock_irqrestore(&x3proto_gpio_lock, flags); + + return 0; +} + +static int x3proto_gpio_get(struct gpio_chip *chip, unsigned gpio) +{ + return !!(__raw_readw(KEYDETR) & (1 << gpio)); +} + +static int x3proto_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) +{ + return x3proto_gpio_irq_map[gpio]; +} + +static void x3proto_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + struct irq_chip *chip = get_irq_desc_chip(desc); + unsigned long mask; + int pin; + + chip->mask_ack(irq); + + mask = __raw_readw(KEYDETR); + + for_each_set_bit(pin, &mask, NR_BASEBOARD_GPIOS) + generic_handle_irq(x3proto_gpio_to_irq(NULL, pin)); + + chip->unmask(irq); +} + +struct gpio_chip x3proto_gpio_chip = { + .label = "x3proto-gpio", + .direction_input = x3proto_gpio_direction_input, + .get = x3proto_gpio_get, + .to_irq = x3proto_gpio_to_irq, + .base = -1, + .ngpio = NR_BASEBOARD_GPIOS, +}; + +int __init x3proto_gpio_setup(void) +{ + int ilsel; + int ret, i; + + ilsel = ilsel_enable(ILSEL_KEY); + if (unlikely(ilsel < 0)) + return ilsel; + + ret = gpiochip_add(&x3proto_gpio_chip); + if (unlikely(ret)) + goto err_gpio; + + for (i = 0; i < NR_BASEBOARD_GPIOS; i++) { + unsigned long flags; + int irq = create_irq(); + + if (unlikely(irq < 0)) { + ret = -EINVAL; + goto err_irq; + } + + spin_lock_irqsave(&x3proto_gpio_lock, flags); + x3proto_gpio_irq_map[i] = irq; + set_irq_chip_and_handler_name(irq, &dummy_irq_chip, + handle_simple_irq, "gpio"); + spin_unlock_irqrestore(&x3proto_gpio_lock, flags); + } + + pr_info("registering '%s' support, handling GPIOs %u -> %u, " + "bound to IRQ %u\n", + x3proto_gpio_chip.label, x3proto_gpio_chip.base, + x3proto_gpio_chip.base + x3proto_gpio_chip.ngpio, + ilsel); + + set_irq_chained_handler(ilsel, x3proto_gpio_irq_handler); + set_irq_wake(ilsel, 1); + + return 0; + +err_irq: + for (; i >= 0; --i) + if (x3proto_gpio_irq_map[i]) + destroy_irq(x3proto_gpio_irq_map[i]); + + ret = gpiochip_remove(&x3proto_gpio_chip); + if (unlikely(ret)) + pr_err("Failed deregistering GPIO\n"); + +err_gpio: + synchronize_irq(ilsel); + + ilsel_disable(ILSEL_KEY); + + return ret; +} diff --git a/arch/sh/boards/mach-x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c index 5c9842704c60..95e346139515 100644 --- a/arch/sh/boards/mach-x3proto/ilsel.c +++ b/arch/sh/boards/mach-x3proto/ilsel.c @@ -1,20 +1,22 @@ /* - * arch/sh/boards/renesas/x3proto/ilsel.c + * arch/sh/boards/mach-x3proto/ilsel.c * * Helper routines for SH-X3 proto board ILSEL. * - * Copyright (C) 2007 Paul Mundt + * Copyright (C) 2007 - 2010 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/bitmap.h> #include <linux/io.h> -#include <asm/ilsel.h> +#include <mach/ilsel.h> /* * ILSEL is split across: @@ -64,6 +66,8 @@ static void __ilsel_enable(ilsel_source_t set, unsigned int bit) unsigned int tmp, shift; unsigned long addr; + pr_notice("enabling ILSEL set %d\n", set); + addr = mk_ilsel_addr(bit); shift = mk_ilsel_shift(bit); @@ -92,8 +96,10 @@ int ilsel_enable(ilsel_source_t set) { unsigned int bit; - /* Aliased sources must use ilsel_enable_fixed() */ - BUG_ON(set > ILSEL_KEY); + if (unlikely(set > ILSEL_KEY)) { + pr_err("Aliased sources must use ilsel_enable_fixed()\n"); + return -EINVAL; + } do { bit = find_first_zero_bit(&ilsel_level_map, ILSEL_LEVELS); @@ -140,6 +146,8 @@ void ilsel_disable(unsigned int irq) unsigned long addr; unsigned int tmp; + pr_notice("disabling ILSEL set %d\n", irq); + addr = mk_ilsel_addr(irq); tmp = __raw_readw(addr); diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c index 102bf56befb4..d682e2b6a856 100644 --- a/arch/sh/boards/mach-x3proto/setup.c +++ b/arch/sh/boards/mach-x3proto/setup.c @@ -1,9 +1,9 @@ /* - * arch/sh/boards/renesas/x3proto/setup.c + * arch/sh/boards/mach-x3proto/setup.c * * Renesas SH-X3 Prototype Board Support. * - * Copyright (C) 2007 - 2008 Paul Mundt + * Copyright (C) 2007 - 2010 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -16,9 +16,13 @@ #include <linux/smc91x.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/input.h> #include <linux/usb/r8a66597.h> #include <linux/usb/m66592.h> -#include <asm/ilsel.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <mach/ilsel.h> +#include <mach/hardware.h> #include <asm/smp-ops.h> static struct resource heartbeat_resources[] = { @@ -122,15 +126,128 @@ static struct platform_device m66592_usb_peripheral_device = { .resource = m66592_usb_peripheral_resources, }; +static struct gpio_keys_button baseboard_buttons[NR_BASEBOARD_GPIOS] = { + { + .desc = "key44", + .code = KEY_POWER, + .active_low = 1, + .wakeup = 1, + }, { + .desc = "key43", + .code = KEY_SUSPEND, + .active_low = 1, + .wakeup = 1, + }, { + .desc = "key42", + .code = KEY_KATAKANAHIRAGANA, + .active_low = 1, + }, { + .desc = "key41", + .code = KEY_SWITCHVIDEOMODE, + .active_low = 1, + }, { + .desc = "key34", + .code = KEY_F12, + .active_low = 1, + }, { + .desc = "key33", + .code = KEY_F11, + .active_low = 1, + }, { + .desc = "key32", + .code = KEY_F10, + .active_low = 1, + }, { + .desc = "key31", + .code = KEY_F9, + .active_low = 1, + }, { + .desc = "key24", + .code = KEY_F8, + .active_low = 1, + }, { + .desc = "key23", + .code = KEY_F7, + .active_low = 1, + }, { + .desc = "key22", + .code = KEY_F6, + .active_low = 1, + }, { + .desc = "key21", + .code = KEY_F5, + .active_low = 1, + }, { + .desc = "key14", + .code = KEY_F4, + .active_low = 1, + }, { + .desc = "key13", + .code = KEY_F3, + .active_low = 1, + }, { + .desc = "key12", + .code = KEY_F2, + .active_low = 1, + }, { + .desc = "key11", + .code = KEY_F1, + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data baseboard_buttons_data = { + .buttons = baseboard_buttons, + .nbuttons = ARRAY_SIZE(baseboard_buttons), +}; + +static struct platform_device baseboard_buttons_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &baseboard_buttons_data, + }, +}; + static struct platform_device *x3proto_devices[] __initdata = { &heartbeat_device, &smc91x_device, &r8a66597_usb_host_device, &m66592_usb_peripheral_device, + &baseboard_buttons_device, }; +static void __init x3proto_init_irq(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRL3210); + + /* Set ICR0.LVLMODE */ + __raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000); +} + static int __init x3proto_devices_setup(void) { + int ret, i; + + /* + * IRLs are only needed for ILSEL mappings, so flip over the INTC + * pins at a later point to enable the GPIOs to settle. + */ + x3proto_init_irq(); + + /* + * Now that ILSELs are available, set up the baseboard GPIOs. + */ + ret = x3proto_gpio_setup(); + if (unlikely(ret)) + return ret; + + /* + * Propagate dynamic GPIOs for the baseboard button device. + */ + for (i = 0; i < ARRAY_SIZE(baseboard_buttons); i++) + baseboard_buttons[i].gpio = x3proto_gpio_chip.base + i; + r8a66597_usb_host_resources[1].start = r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I); @@ -145,14 +262,6 @@ static int __init x3proto_devices_setup(void) } device_initcall(x3proto_devices_setup); -static void __init x3proto_init_irq(void) -{ - plat_irq_setup_pins(IRQ_MODE_IRL3210); - - /* Set ICR0.LVLMODE */ - __raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000); -} - static void __init x3proto_setup(char **cmdline_p) { register_smp_ops(&shx3_smp_ops); @@ -161,5 +270,4 @@ static void __init x3proto_setup(char **cmdline_p) static struct sh_machine_vector mv_x3proto __initmv = { .mv_name = "x3proto", .mv_setup = x3proto_setup, - .mv_init_irq = x3proto_init_irq, }; |