22 files changed, 400 insertions, 39 deletions

diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 2018c7ea4c93..d893411022d5 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -3,6 +3,9 @@ menu "Board support"
 config SOLUTION_ENGINE
 	bool
 
+config SH_ALPHA_BOARD
+	bool
+
 config SH_SOLUTION_ENGINE
 	bool "SolutionEngine"
 	select SOLUTION_ENGINE
@@ -320,6 +323,21 @@ config SH_SH2007
 	  Compact Flash socket, two serial ports and PC-104 bus.
 	  More information at <http://sh2000.sh-linux.org>.
 
+config SH_APSH4A3A
+	bool "AP-SH4A-3A"
+	select SH_ALPHA_BOARD
+	depends on CPU_SUBTYPE_SH7785
+	help
+	  Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
+
+config SH_APSH4AD0A
+	bool "AP-SH4AD-0A"
+	select SH_ALPHA_BOARD
+	select SYS_SUPPORTS_PCI
+	depends on CPU_SUBTYPE_SH7786
+	help
+	  Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
+
 endmenu
 
 source "arch/sh/boards/mach-r2d/Kconfig"
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index be7d11d04b26..975a0f64ff20 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -13,3 +13,5 @@ obj-$(CONFIG_SH_ESPT)		+= board-espt.o
 obj-$(CONFIG_SH_POLARIS)	+= board-polaris.o
 obj-$(CONFIG_SH_TITAN)		+= board-titan.o
 obj-$(CONFIG_SH_SH7757LCR)	+= board-sh7757lcr.o
+obj-$(CONFIG_SH_APSH4A3A)	+= board-apsh4a3a.o
+obj-$(CONFIG_SH_APSH4AD0A)	+= board-apsh4ad0a.o
diff --git a/arch/sh/boards/board-apsh4a3a.c b/arch/sh/boards/board-apsh4a3a.c
new file mode 100644
index 000000000000..8e2a27057bc9
--- /dev/null
+++ b/arch/sh/boards/board-apsh4a3a.c
@@ -0,0 +1,175 @@
+/*
+ * ALPHAPROJECT AP-SH4A-3A Support.
+ *
+ * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd.
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ * Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mtd/physmap.h>
+#include <linux/smsc911x.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+#include <asm/clock.h>
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 4,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x01000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.name		= "smsc911x-memory",
+		.start		= 0xA4000000,
+		.end		= 0xA4000000 + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name		= "smsc911x-irq",
+		.start		= evt2irq(0x200),
+		.end		= evt2irq(0x200),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_16BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct platform_device *apsh4a3a_devices[] __initdata = {
+	&nor_flash_device,
+	&smsc911x_device,
+};
+
+static int __init apsh4a3a_devices_setup(void)
+{
+	return platform_add_devices(apsh4a3a_devices,
+				    ARRAY_SIZE(apsh4a3a_devices));
+}
+device_initcall(apsh4a3a_devices_setup);
+
+static int apsh4a3a_clk_init(void)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_get(NULL, "extal");
+	if (!clk || IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_set_rate(clk, 33333000);
+	clk_put(clk);
+
+	return ret;
+}
+
+/* Initialize the board */
+static void __init apsh4a3a_setup(char **cmdline_p)
+{
+	printk(KERN_INFO "Alpha Project AP-SH4A-3A support:\n");
+}
+
+static void __init apsh4a3a_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+}
+
+/* Return the board specific boot mode pin configuration */
+static int apsh4a3a_mode_pins(void)
+{
+	int value = 0;
+
+	/* These are the factory default settings of SW1 and SW2.
+	 * If you change these dip switches then you will need to
+	 * adjust the values below as well.
+	 */
+	value &= ~MODE_PIN0;  /* Clock Mode 16 */
+	value &= ~MODE_PIN1;
+	value &= ~MODE_PIN2;
+	value &= ~MODE_PIN3;
+	value |=  MODE_PIN4;
+	value &= ~MODE_PIN5;  /* 16-bit Area0 bus width */
+	value |=  MODE_PIN6;  /* Area 0 SRAM interface */
+	value |=  MODE_PIN7;
+	value |=  MODE_PIN8;  /* Little Endian */
+	value |=  MODE_PIN9;  /* Master Mode */
+	value |=  MODE_PIN10; /* Crystal resonator */
+	value |=  MODE_PIN11; /* Display Unit */
+	value |=  MODE_PIN12;
+	value &= ~MODE_PIN13; /* 29-bit address mode */
+	value |=  MODE_PIN14; /* No PLL step-up */
+
+	return value;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_apsh4a3a __initmv = {
+	.mv_name		= "AP-SH4A-3A",
+	.mv_setup		= apsh4a3a_setup,
+	.mv_clk_init		= apsh4a3a_clk_init,
+	.mv_init_irq		= apsh4a3a_init_irq,
+	.mv_mode_pins		= apsh4a3a_mode_pins,
+};
diff --git a/arch/sh/boards/board-apsh4ad0a.c b/arch/sh/boards/board-apsh4ad0a.c
new file mode 100644
index 000000000000..e2bd218a054e
--- /dev/null
+++ b/arch/sh/boards/board-apsh4ad0a.c
@@ -0,0 +1,125 @@
+/*
+ * ALPHAPROJECT AP-SH4AD-0A Support.
+ *
+ * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd.
+ * Copyright (C) 2010  Matt Fleming
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.name		= "smsc911x-memory",
+		.start		= 0xA4000000,
+		.end		= 0xA4000000 + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name		= "smsc911x-irq",
+		.start		= evt2irq(0x200),
+		.end		= evt2irq(0x200),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_16BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct platform_device *apsh4ad0a_devices[] __initdata = {
+	&smsc911x_device,
+};
+
+static int __init apsh4ad0a_devices_setup(void)
+{
+	return platform_add_devices(apsh4ad0a_devices,
+				    ARRAY_SIZE(apsh4ad0a_devices));
+}
+device_initcall(apsh4ad0a_devices_setup);
+
+static int apsh4ad0a_mode_pins(void)
+{
+	int value = 0;
+
+	/* These are the factory default settings of SW1 and SW2.
+	 * If you change these dip switches then you will need to
+	 * adjust the values below as well.
+	 */
+	value |=  MODE_PIN0;  /* Clock Mode 3 */
+	value |=  MODE_PIN1;
+	value &= ~MODE_PIN2;
+	value &= ~MODE_PIN3;
+	value &= ~MODE_PIN4;  /* 16-bit Area0 bus width  */
+	value |=  MODE_PIN5;
+	value |=  MODE_PIN6;
+	value |=  MODE_PIN7;  /* Normal mode */
+	value |=  MODE_PIN8;  /* Little Endian */
+	value |=  MODE_PIN9;  /* Crystal resonator */
+	value &= ~MODE_PIN10; /* 29-bit address mode */
+	value &= ~MODE_PIN11; /* PCI-E Root port */
+	value &= ~MODE_PIN12; /* 4 lane + 1 lane */
+	value |=  MODE_PIN13; /* AUD Enable */
+	value &= ~MODE_PIN14; /* Normal Operation */
+
+	return value;
+}
+
+static int apsh4ad0a_clk_init(void)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_get(NULL, "extal");
+	if (!clk || IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_set_rate(clk, 33333000);
+	clk_put(clk);
+
+	return ret;
+}
+
+/* Initialize the board */
+static void __init apsh4ad0a_setup(char **cmdline_p)
+{
+	pr_info("Alpha Project AP-SH4AD-0A support:\n");
+}
+
+static void __init apsh4ad0a_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_apsh4ad0a __initmv = {
+	.mv_name		= "AP-SH4AD-0A",
+	.mv_setup		= apsh4ad0a_setup,
+	.mv_mode_pins		= apsh4ad0a_mode_pins,
+	.mv_clk_init		= apsh4ad0a_clk_init,
+	.mv_init_irq		= apsh4ad0a_init_irq,
+};
diff --git a/arch/sh/boards/board-edosk7705.c b/arch/sh/boards/board-edosk7705.c
index 4cb3bb74c36f..541d8a281035 100644
--- a/arch/sh/boards/board-edosk7705.c
+++ b/arch/sh/boards/board-edosk7705.c
@@ -66,7 +66,7 @@ static int __init init_edosk7705_devices(void)
 	return platform_add_devices(edosk7705_devices,
 				    ARRAY_SIZE(edosk7705_devices));
 }
-__initcall(init_edosk7705_devices);
+device_initcall(init_edosk7705_devices);
 
 /*
  * The Machine Vector
diff --git a/arch/sh/boards/board-edosk7760.c b/arch/sh/boards/board-edosk7760.c
index 35dc0994875d..f47ac82da876 100644
--- a/arch/sh/boards/board-edosk7760.c
+++ b/arch/sh/boards/board-edosk7760.c
@@ -182,7 +182,7 @@ static int __init init_edosk7760_devices(void)
 	return platform_add_devices(edosk7760_devices,
 				    ARRAY_SIZE(edosk7760_devices));
 }
-__initcall(init_edosk7760_devices);
+device_initcall(init_edosk7760_devices);
 
 /*
  * The Machine Vector
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index fe7e686c94ac..ee65ff05c558 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -284,7 +284,7 @@ static int __init sh7785lcr_devices_setup(void)
 	return platform_add_devices(sh7785lcr_devices,
 				    ARRAY_SIZE(sh7785lcr_devices));
 }
-__initcall(sh7785lcr_devices_setup);
+device_initcall(sh7785lcr_devices_setup);
 
 /* Initialize IRQ setting */
 void __init init_sh7785lcr_IRQ(void)
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 07ea908c510d..3e5fc3bbf3ed 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -14,6 +14,8 @@
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/sh_flctl.h>
 #include <linux/delay.h>
@@ -430,11 +432,18 @@ static struct resource sdhi0_cn3_resources[] = {
 	},
 };
 
+static struct sh_mobile_sdhi_info sdhi0_cn3_data = {
+	.tmio_caps      = MMC_CAP_SDIO_IRQ,
+};
+
 static struct platform_device sdhi0_cn3_device = {
 	.name		= "sh_mobile_sdhi",
 	.id             = 0, /* "sdhi0" clock */
 	.num_resources	= ARRAY_SIZE(sdhi0_cn3_resources),
 	.resource	= sdhi0_cn3_resources,
+	.dev = {
+		.platform_data = &sdhi0_cn3_data,
+	},
 	.archdata = {
 		.hwblk_id = HWBLK_SDHI0,
 	},
@@ -453,11 +462,18 @@ static struct resource sdhi1_cn7_resources[] = {
 	},
 };
 
+static struct sh_mobile_sdhi_info sdhi1_cn7_data = {
+	.tmio_caps      = MMC_CAP_SDIO_IRQ,
+};
+
 static struct platform_device sdhi1_cn7_device = {
 	.name		= "sh_mobile_sdhi",
 	.id             = 1, /* "sdhi1" clock */
 	.num_resources	= ARRAY_SIZE(sdhi1_cn7_resources),
 	.resource	= sdhi1_cn7_resources,
+	.dev = {
+		.platform_data = &sdhi1_cn7_data,
+	},
 	.archdata = {
 		.hwblk_id = HWBLK_SDHI1,
 	},
diff --git a/arch/sh/boards/mach-cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c
index 7e8216ac31bd..e89e8e122a26 100644
--- a/arch/sh/boards/mach-cayman/setup.c
+++ b/arch/sh/boards/mach-cayman/setup.c
@@ -165,7 +165,7 @@ static int __init smsc_superio_setup(void)
 
 	return 0;
 }
-__initcall(smsc_superio_setup);
+device_initcall(smsc_superio_setup);
 
 static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
 {
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index f48c492a68d3..701667acfd89 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -473,6 +473,7 @@ static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
 	.set_pwr	= sdhi0_set_pwr,
+	.tmio_caps      = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD,
 };
 
 static struct resource sdhi0_resources[] = {
@@ -511,6 +512,7 @@ static void sdhi1_set_pwr(struct platform_device *pdev, int state)
 static struct sh_mobile_sdhi_info sdhi1_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
+	.tmio_caps      = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD,
 	.set_pwr	= sdhi1_set_pwr,
 };
 
@@ -1292,6 +1294,7 @@ static int __init arch_setup(void)
 	i2c_register_board_info(1, i2c1_devices,
 				ARRAY_SIZE(i2c1_devices));
 
+#if defined(CONFIG_VIDEO_SH_VOU) || defined(CONFIG_VIDEO_SH_VOU_MODULE)
 	/* VOU */
 	gpio_request(GPIO_FN_DV_D15, NULL);
 	gpio_request(GPIO_FN_DV_D14, NULL);
@@ -1323,6 +1326,7 @@ static int __init arch_setup(void)
 
 	/* Remove reset */
 	gpio_set_value(GPIO_PTG4, 1);
+#endif
 
 	return platform_add_devices(ecovec_devices,
 				    ARRAY_SIZE(ecovec_devices));
diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
index 4499a3749d40..adc9b4bba828 100644
--- a/arch/sh/boards/mach-hp6xx/pm.c
+++ b/arch/sh/boards/mach-hp6xx/pm.c
@@ -143,7 +143,7 @@ static int hp6x0_pm_enter(suspend_state_t state)
 	return 0;
 }
 
-static struct platform_suspend_ops hp6x0_pm_ops = {
+static const struct platform_suspend_ops hp6x0_pm_ops = {
 	.enter		= hp6x0_pm_enter,
 	.valid		= suspend_valid_only_mem,
 };
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 9b60eaabf8f3..7504daaa85da 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mmc/host.h>
 #include <linux/mfd/tmio.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/onenand.h>
@@ -366,6 +367,7 @@ static struct sh_mobile_sdhi_info sh7724_sdhi0_data = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
 	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
+	.tmio_caps      = MMC_CAP_SDIO_IRQ,
 };
 
 static struct platform_device kfr2r09_sh_sdhi0_device = {
diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c
index e79412a40490..c00ace38db3f 100644
--- a/arch/sh/boards/mach-landisk/irq.c
+++ b/arch/sh/boards/mach-landisk/irq.c
@@ -1,9 +1,10 @@
 /*
- * arch/sh/boards/landisk/irq.c
+ * arch/sh/boards/mach-landisk/irq.c
  *
  * I-O DATA Device, Inc. LANDISK Support
  *
  * Copyright (C) 2005-2007 kogiidena
+ * Copyright (C) 2011 Nobuhiro Iwamatsu
  *
  * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
  * Based largely on io_se.c.
@@ -12,44 +13,54 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <mach-landisk/mach/iodata_landisk.h>
 
-static void disable_landisk_irq(struct irq_data *data)
-{
-	unsigned char mask = 0xff ^ (0x01 << (data->irq - 5));
+enum {
+	UNUSED = 0,
 
-	__raw_writeb(__raw_readb(PA_IMASK) & mask, PA_IMASK);
-}
-
-static void enable_landisk_irq(struct irq_data *data)
-{
-	unsigned char value = (0x01 << (data->irq - 5));
+	PCI_INTA, /* PCI int A */
+	PCI_INTB, /* PCI int B */
+	PCI_INTC, /* PCI int C */
+	PCI_INTD, /* PCI int D */
+	ATA,	  /* ATA */
+	FATA,	  /* CF */
+	POWER,	  /* Power swtich */
+	BUTTON,	  /* Button swtich */
+};
 
-	__raw_writeb(__raw_readb(PA_IMASK) | value, PA_IMASK);
-}
+/* Vectors for LANDISK */
+static struct intc_vect vectors_landisk[] __initdata = {
+	INTC_IRQ(PCI_INTA, IRQ_PCIINTA),
+	INTC_IRQ(PCI_INTB, IRQ_PCIINTB),
+	INTC_IRQ(PCI_INTC, IRQ_PCIINTC),
+	INTC_IRQ(PCI_INTD, IRQ_PCIINTD),
+	INTC_IRQ(ATA, IRQ_ATA),
+	INTC_IRQ(FATA, IRQ_FATA),
+	INTC_IRQ(POWER, IRQ_POWER),
+	INTC_IRQ(BUTTON, IRQ_BUTTON),
+};
 
-static struct irq_chip landisk_irq_chip __read_mostly = {
-	.name		= "LANDISK",
-	.irq_mask	= disable_landisk_irq,
-	.irq_unmask	= enable_landisk_irq,
+/* IRLMSK mask register layout for LANDISK */
+static struct intc_mask_reg mask_registers_landisk[] __initdata = {
+	{ PA_IMASK, 0, 8, /* IRLMSK */
+	  {  BUTTON, POWER, FATA, ATA,
+	     PCI_INTD, PCI_INTC, PCI_INTB, PCI_INTA,
+	  }
+	},
 };
 
+static DECLARE_INTC_DESC(intc_desc_landisk, "landisk", vectors_landisk, NULL,
+			mask_registers_landisk, NULL, NULL);
 /*
  * Initialize IRQ setting
  */
 void __init init_landisk_IRQ(void)
 {
-	int i;
-
-	for (i = 5; i < 14; i++) {
-		disable_irq_nosync(i);
-		set_irq_chip_and_handler_name(i, &landisk_irq_chip,
-					      handle_level_irq, "level");
-		enable_landisk_irq(irq_get_irq_data(i));
-	}
+	register_intc_controller(&intc_desc_landisk);
 	__raw_writeb(0x00, PA_PWRINT_CLR);
 }
diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c
index 50337acc18c5..94186cf079b6 100644
--- a/arch/sh/boards/mach-landisk/setup.c
+++ b/arch/sh/boards/mach-landisk/setup.c
@@ -21,8 +21,6 @@
 #include <mach-landisk/mach/iodata_landisk.h>
 #include <asm/io.h>
 
-void init_landisk_IRQ(void);
-
 static void landisk_power_off(void)
 {
         __raw_writeb(0x01, PA_SHUTDOWN);
@@ -83,7 +81,7 @@ static int __init landisk_devices_setup(void)
 				    ARRAY_SIZE(landisk_devices));
 }
 
-__initcall(landisk_devices_setup);
+device_initcall(landisk_devices_setup);
 
 static void __init landisk_setup(char **cmdline_p)
 {
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index c8acfec98695..03a7ffe729d5 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -13,6 +13,7 @@
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/nand.h>
 #include <linux/i2c.h>
@@ -410,6 +411,7 @@ static struct resource sdhi_cn9_resources[] = {
 static struct sh_mobile_sdhi_info sh7724_sdhi_data = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
+	.tmio_caps      = MMC_CAP_SDIO_IRQ,
 };
 
 static struct platform_device sdhi_cn9_device = {
diff --git a/arch/sh/boards/mach-r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
index b84df6a3a93c..4b98a5251f83 100644
--- a/arch/sh/boards/mach-r2d/setup.c
+++ b/arch/sh/boards/mach-r2d/setup.c
@@ -258,7 +258,7 @@ static int __init rts7751r2d_devices_setup(void)
 	return platform_add_devices(rts7751r2d_devices,
 				    ARRAY_SIZE(rts7751r2d_devices));
 }
-__initcall(rts7751r2d_devices_setup);
+device_initcall(rts7751r2d_devices_setup);
 
 static void rts7751r2d_power_off(void)
 {
diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c
index 75e4ddbbec3e..1521aa75ee3a 100644
--- a/arch/sh/boards/mach-sdk7786/setup.c
+++ b/arch/sh/boards/mach-sdk7786/setup.c
@@ -15,13 +15,13 @@
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/clk.h>
+#include <linux/clkdev.h>
 #include <mach/fpga.h>
 #include <mach/irq.h>
 #include <asm/machvec.h>
 #include <asm/heartbeat.h>
 #include <asm/sizes.h>
 #include <asm/clock.h>
-#include <asm/clkdev.h>
 #include <asm/reboot.h>
 #include <asm/smp-ops.h>
 
@@ -135,7 +135,7 @@ static int __init sdk7786_devices_setup(void)
 
 	return sdk7786_i2c_setup();
 }
-__initcall(sdk7786_devices_setup);
+device_initcall(sdk7786_devices_setup);
 
 static int sdk7786_mode_pins(void)
 {
diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
index 33039e0dc568..8ab8330e3fd1 100644
--- a/arch/sh/boards/mach-se/7206/setup.c
+++ b/arch/sh/boards/mach-se/7206/setup.c
@@ -77,7 +77,7 @@ static int __init se7206_devices_setup(void)
 {
 	return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
 }
-__initcall(se7206_devices_setup);
+device_initcall(se7206_devices_setup);
 
 static int se7206_mode_pins(void)
 {
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 527a0cd956b5..527679394a25 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -15,6 +15,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
 #include <linux/delay.h>
 #include <linux/smc91x.h>
@@ -318,6 +319,10 @@ static struct platform_device fsi_device = {
 	},
 };
 
+static struct platform_device fsi_ak4642_device = {
+	.name		= "sh_fsi_a_ak4642",
+};
+
 /* KEYSC in SoC (Needs SW33-2 set to ON) */
 static struct sh_keysc_info keysc_info = {
 	.mode = SH_KEYSC_MODE_1,
@@ -467,6 +472,7 @@ static struct resource sdhi0_cn7_resources[] = {
 static struct sh_mobile_sdhi_info sh7724_sdhi0_data = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
+	.tmio_caps      = MMC_CAP_SDIO_IRQ,
 };
 
 static struct platform_device sdhi0_cn7_device = {
@@ -498,6 +504,7 @@ static struct resource sdhi1_cn8_resources[] = {
 static struct sh_mobile_sdhi_info sh7724_sdhi1_data = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
+	.tmio_caps      = MMC_CAP_SDIO_IRQ,
 };
 
 static struct platform_device sdhi1_cn8_device = {
@@ -590,6 +597,7 @@ static struct platform_device *ms7724se_devices[] __initdata = {
 	&sh7724_usb0_host_device,
 	&sh7724_usb1_gadget_device,
 	&fsi_device,
+	&fsi_ak4642_device,
 	&sdhi0_cn7_device,
 	&sdhi1_cn8_device,
 	&irda_device,
diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c
index 9fbc51beb181..4ed60c5e221f 100644
--- a/arch/sh/boards/mach-se/7751/setup.c
+++ b/arch/sh/boards/mach-se/7751/setup.c
@@ -48,7 +48,7 @@ static int __init se7751_devices_setup(void)
 {
 	return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
 }
-__initcall(se7751_devices_setup);
+device_initcall(se7751_devices_setup);
 
 /*
  * The Machine Vector
diff --git a/arch/sh/boards/mach-sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c
index 1b200990500c..f83ac7995d0f 100644
--- a/arch/sh/boards/mach-sh03/rtc.c
+++ b/arch/sh/boards/mach-sh03/rtc.c
@@ -108,7 +108,7 @@ static int set_rtc_mmss(unsigned long nowtime)
 		__raw_writeb(real_minutes % 10, RTC_MIN1);
 		__raw_writeb(real_minutes / 10, RTC_MIN10);
 	} else {
-		printk(KERN_WARNING
+		printk_once(KERN_NOTICE
 		       "set_rtc_mmss: can't update from %d to %d\n",
 		       cmos_minutes, real_minutes);
 		retval = -1;
diff --git a/arch/sh/boards/mach-sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c
index af4a0c012a96..d4f79b2a6514 100644
--- a/arch/sh/boards/mach-sh03/setup.c
+++ b/arch/sh/boards/mach-sh03/setup.c
@@ -96,7 +96,7 @@ static int __init sh03_devices_setup(void)
 
 	return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
 }
-__initcall(sh03_devices_setup);
+device_initcall(sh03_devices_setup);
 
 static struct sh_machine_vector mv_sh03 __initmv = {
 	.mv_name		= "Interface (CTP/PCI-SH03)",