diff options
Diffstat (limited to 'arch/tile/include/arch/trio_pcie_intfc.h')
| -rw-r--r-- | arch/tile/include/arch/trio_pcie_intfc.h | 229 |
1 files changed, 0 insertions, 229 deletions
diff --git a/arch/tile/include/arch/trio_pcie_intfc.h b/arch/tile/include/arch/trio_pcie_intfc.h deleted file mode 100644 index 0487fdb9d581..000000000000 --- a/arch/tile/include/arch/trio_pcie_intfc.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Machine-generated file; do not edit. */ - -#ifndef __ARCH_TRIO_PCIE_INTFC_H__ -#define __ARCH_TRIO_PCIE_INTFC_H__ - -#include <arch/abi.h> -#include <arch/trio_pcie_intfc_def.h> - -#ifndef __ASSEMBLER__ - -/* - * Port Configuration. - * Configuration of the PCIe Port - */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* Provides the state of the strapping pins for this port. */ - uint_reg_t strap_state : 3; - /* Reserved. */ - uint_reg_t __reserved_0 : 1; - /* - * When 1, the device type will be overridden using OVD_DEV_TYPE_VAL. - * When 0, the device type is determined based on the STRAP_STATE. - */ - uint_reg_t ovd_dev_type : 1; - /* Provides the device type when OVD_DEV_TYPE is 1. */ - uint_reg_t ovd_dev_type_val : 4; - /* Determines how link is trained. */ - uint_reg_t train_mode : 2; - /* Reserved. */ - uint_reg_t __reserved_1 : 1; - /* - * For PCIe, used to flip physical RX lanes that were not properly wired. - * This is not the same as lane reversal which is handled automatically - * during link training. When 0, RX Lane0 must be wired to the link - * partner (either to its Lane0 or it's LaneN). When RX_LANE_FLIP is 1, - * the highest numbered lane for this port becomes Lane0 and Lane0 does - * NOT have to be wired to the link partner. - */ - uint_reg_t rx_lane_flip : 1; - /* - * For PCIe, used to flip physical TX lanes that were not properly wired. - * This is not the same as lane reversal which is handled automatically - * during link training. When 0, TX Lane0 must be wired to the link - * partner (either to its Lane0 or it's LaneN). When TX_LANE_FLIP is 1, - * the highest numbered lane for this port becomes Lane0 and Lane0 does - * NOT have to be wired to the link partner. - */ - uint_reg_t tx_lane_flip : 1; - /* - * For StreamIO port, configures the width of the port when TRAIN_MODE is - * not STRAP. - */ - uint_reg_t stream_width : 2; - /* - * For StreamIO port, configures the rate of the port when TRAIN_MODE is - * not STRAP. - */ - uint_reg_t stream_rate : 2; - /* Reserved. */ - uint_reg_t __reserved_2 : 46; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved_2 : 46; - uint_reg_t stream_rate : 2; - uint_reg_t stream_width : 2; - uint_reg_t tx_lane_flip : 1; - uint_reg_t rx_lane_flip : 1; - uint_reg_t __reserved_1 : 1; - uint_reg_t train_mode : 2; - uint_reg_t ovd_dev_type_val : 4; - uint_reg_t ovd_dev_type : 1; - uint_reg_t __reserved_0 : 1; - uint_reg_t strap_state : 3; -#endif - }; - - uint_reg_t word; -} TRIO_PCIE_INTFC_PORT_CONFIG_t; - -/* - * Port Status. - * Status of the PCIe Port. This register applies to the StreamIO port when - * StreamIO is enabled. - */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* - * Indicates the DL state of the port. When 1, the port is up and ready - * to receive traffic. - */ - uint_reg_t dl_up : 1; - /* - * Indicates the number of times the link has gone down. Clears on read. - */ - uint_reg_t dl_down_cnt : 7; - /* Indicates the SERDES PLL has spun up and is providing a valid clock. */ - uint_reg_t clock_ready : 1; - /* Reserved. */ - uint_reg_t __reserved_0 : 7; - /* Device revision ID. */ - uint_reg_t device_rev : 8; - /* Link state (PCIe). */ - uint_reg_t ltssm_state : 6; - /* Link power management state (PCIe). */ - uint_reg_t pm_state : 3; - /* Reserved. */ - uint_reg_t __reserved_1 : 31; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved_1 : 31; - uint_reg_t pm_state : 3; - uint_reg_t ltssm_state : 6; - uint_reg_t device_rev : 8; - uint_reg_t __reserved_0 : 7; - uint_reg_t clock_ready : 1; - uint_reg_t dl_down_cnt : 7; - uint_reg_t dl_up : 1; -#endif - }; - - uint_reg_t word; -} TRIO_PCIE_INTFC_PORT_STATUS_t; - -/* - * Transmit FIFO Control. - * Contains TX FIFO thresholds. These registers are for diagnostics purposes - * only. Changing these values causes undefined behavior. - */ - -__extension__ -typedef union -{ - struct - { -#ifndef __BIG_ENDIAN__ - /* - * Almost-Empty level for TX0 data. Typically set to at least - * roundup(38.0*M/N) where N=tclk frequency and M=MAC symbol rate in MHz - * for a x4 port (250MHz). - */ - uint_reg_t tx0_data_ae_lvl : 7; - /* Reserved. */ - uint_reg_t __reserved_0 : 1; - /* Almost-Empty level for TX1 data. */ - uint_reg_t tx1_data_ae_lvl : 7; - /* Reserved. */ - uint_reg_t __reserved_1 : 1; - /* Almost-Full level for TX0 data. */ - uint_reg_t tx0_data_af_lvl : 7; - /* Reserved. */ - uint_reg_t __reserved_2 : 1; - /* Almost-Full level for TX1 data. */ - uint_reg_t tx1_data_af_lvl : 7; - /* Reserved. */ - uint_reg_t __reserved_3 : 1; - /* Almost-Full level for TX0 info. */ - uint_reg_t tx0_info_af_lvl : 5; - /* Reserved. */ - uint_reg_t __reserved_4 : 3; - /* Almost-Full level for TX1 info. */ - uint_reg_t tx1_info_af_lvl : 5; - /* Reserved. */ - uint_reg_t __reserved_5 : 3; - /* - * This register provides performance adjustment for high bandwidth - * flows. The MAC will assert almost-full to TRIO if non-posted credits - * fall below this level. Note that setting this larger than the initial - * PORT_CREDIT.NPH value will cause READS to never be sent. If the - * initial credit value from the link partner is smaller than this value - * when the link comes up, the value will be reset to the initial credit - * value to prevent lockup. - */ - uint_reg_t min_np_credits : 8; - /* - * This register provides performance adjustment for high bandwidth - * flows. The MAC will assert almost-full to TRIO if posted credits fall - * below this level. Note that setting this larger than the initial - * PORT_CREDIT.PH value will cause WRITES to never be sent. If the - * initial credit value from the link partner is smaller than this value - * when the link comes up, the value will be reset to the initial credit - * value to prevent lockup. - */ - uint_reg_t min_p_credits : 8; -#else /* __BIG_ENDIAN__ */ - uint_reg_t min_p_credits : 8; - uint_reg_t min_np_credits : 8; - uint_reg_t __reserved_5 : 3; - uint_reg_t tx1_info_af_lvl : 5; - uint_reg_t __reserved_4 : 3; - uint_reg_t tx0_info_af_lvl : 5; - uint_reg_t __reserved_3 : 1; - uint_reg_t tx1_data_af_lvl : 7; - uint_reg_t __reserved_2 : 1; - uint_reg_t tx0_data_af_lvl : 7; - uint_reg_t __reserved_1 : 1; - uint_reg_t tx1_data_ae_lvl : 7; - uint_reg_t __reserved_0 : 1; - uint_reg_t tx0_data_ae_lvl : 7; -#endif - }; - - uint_reg_t word; -} TRIO_PCIE_INTFC_TX_FIFO_CTL_t; -#endif /* !defined(__ASSEMBLER__) */ - -#endif /* !defined(__ARCH_TRIO_PCIE_INTFC_H__) */ |