diff options
Diffstat (limited to 'arch/v850/kernel/anna.c')
| -rw-r--r-- | arch/v850/kernel/anna.c | 202 |
1 files changed, 0 insertions, 202 deletions
diff --git a/arch/v850/kernel/anna.c b/arch/v850/kernel/anna.c deleted file mode 100644 index 5978a25170fb..000000000000 --- a/arch/v850/kernel/anna.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * arch/v850/kernel/anna.c -- Anna V850E2 evaluation chip/board - * - * Copyright (C) 2002,03 NEC Electronics Corporation - * Copyright (C) 2002,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/bootmem.h> -#include <linux/major.h> -#include <linux/irq.h> - -#include <asm/machdep.h> -#include <asm/atomic.h> -#include <asm/page.h> -#include <asm/v850e_timer_d.h> -#include <asm/v850e_uart.h> - -#include "mach.h" - - -/* SRAM and SDRAM are vaguely contiguous (with a big hole in between; see - mach_reserve_bootmem for details); use both as one big area. */ -#define RAM_START SRAM_ADDR -#define RAM_END (SDRAM_ADDR + SDRAM_SIZE) - -/* The bits of this port are connected to an 8-LED bar-graph. */ -#define LEDS_PORT 0 - - -static void anna_led_tick (void); - - -void __init mach_early_init (void) -{ - ANNA_ILBEN = 0; - - V850E2_CSC(0) = 0x402F; - V850E2_CSC(1) = 0x4000; - V850E2_BPC = 0; - V850E2_BSC = 0xAAAA; - V850E2_BEC = 0; - -#if 0 - V850E2_BHC = 0xFFFF; /* icache all memory, dcache all */ -#else - V850E2_BHC = 0; /* cache no memory */ -#endif - V850E2_BCT(0) = 0xB088; - V850E2_BCT(1) = 0x0008; - V850E2_DWC(0) = 0x0027; - V850E2_DWC(1) = 0; - V850E2_BCC = 0x0006; - V850E2_ASC = 0; - V850E2_LBS = 0x0089; - V850E2_SCR(3) = 0x21A9; - V850E2_RFS(3) = 0x8121; - - v850e_intc_disable_irqs (); -} - -void __init mach_setup (char **cmdline) -{ - ANNA_PORT_PM (LEDS_PORT) = 0; /* Make all LED pins output pins. */ - mach_tick = anna_led_tick; -} - -void __init mach_get_physical_ram (unsigned long *ram_start, - unsigned long *ram_len) -{ - *ram_start = RAM_START; - *ram_len = RAM_END - RAM_START; -} - -void __init mach_reserve_bootmem () -{ - /* The space between SRAM and SDRAM is filled with duplicate - images of SRAM. Prevent the kernel from using them. */ - reserve_bootmem (SRAM_ADDR + SRAM_SIZE, - SDRAM_ADDR - (SRAM_ADDR + SRAM_SIZE), - BOOTMEM_DEFAULT); -} - -void mach_gettimeofday (struct timespec *tv) -{ - tv->tv_sec = 0; - tv->tv_nsec = 0; -} - -void __init mach_sched_init (struct irqaction *timer_action) -{ - /* Start hardware timer. */ - v850e_timer_d_configure (0, HZ); - /* Install timer interrupt handler. */ - setup_irq (IRQ_INTCMD(0), timer_action); -} - -static struct v850e_intc_irq_init irq_inits[] = { - { "IRQ", 0, NUM_MACH_IRQS, 1, 7 }, - { "PIN", IRQ_INTP(0), IRQ_INTP_NUM, 1, 4 }, - { "CCC", IRQ_INTCCC(0), IRQ_INTCCC_NUM, 1, 5 }, - { "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM, 1, 5 }, - { "DMA", IRQ_INTDMA(0), IRQ_INTDMA_NUM, 1, 2 }, - { "DMXER", IRQ_INTDMXER,1, 1, 2 }, - { "SRE", IRQ_INTSRE(0), IRQ_INTSRE_NUM, 3, 3 }, - { "SR", IRQ_INTSR(0), IRQ_INTSR_NUM, 3, 4 }, - { "ST", IRQ_INTST(0), IRQ_INTST_NUM, 3, 5 }, - { 0 } -}; -#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1) - -static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS]; - -void __init mach_init_irqs (void) -{ - v850e_intc_init_irq_types (irq_inits, hw_itypes); -} - -void machine_restart (char *__unused) -{ -#ifdef CONFIG_RESET_GUARD - disable_reset_guard (); -#endif - asm ("jmp r0"); /* Jump to the reset vector. */ -} - -void machine_halt (void) -{ -#ifdef CONFIG_RESET_GUARD - disable_reset_guard (); -#endif - local_irq_disable (); /* Ignore all interrupts. */ - ANNA_PORT_IO(LEDS_PORT) = 0xAA; /* Note that we halted. */ - for (;;) - asm ("halt; nop; nop; nop; nop; nop"); -} - -void machine_power_off (void) -{ - machine_halt (); -} - -/* Called before configuring an on-chip UART. */ -void anna_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud) -{ - /* The Anna connects some general-purpose I/O pins on the CPU to - the RTS/CTS lines of UART 1's serial connection. I/O pins P07 - and P37 are RTS and CTS respectively. */ - if (chan == 1) { - ANNA_PORT_PM(0) &= ~0x80; /* P07 in output mode */ - ANNA_PORT_PM(3) |= 0x80; /* P37 in input mode */ - } -} - -/* Minimum and maximum bounds for the moving upper LED boundary in the - clock tick display. We can't use the last bit because it's used for - UART0's CTS output. */ -#define MIN_MAX_POS 0 -#define MAX_MAX_POS 6 - -/* There are MAX_MAX_POS^2 - MIN_MAX_POS^2 cycles in the animation, so if - we pick 6 and 0 as above, we get 49 cycles, which is when divided into - the standard 100 value for HZ, gives us an almost 1s total time. */ -#define TICKS_PER_FRAME \ - (HZ / (MAX_MAX_POS * MAX_MAX_POS - MIN_MAX_POS * MIN_MAX_POS)) - -static void anna_led_tick () -{ - static unsigned counter = 0; - - if (++counter == TICKS_PER_FRAME) { - static int pos = 0, max_pos = MAX_MAX_POS, dir = 1; - - if (dir > 0 && pos == max_pos) { - dir = -1; - if (max_pos == MIN_MAX_POS) - max_pos = MAX_MAX_POS; - else - max_pos--; - } else { - if (dir < 0 && pos == 0) - dir = 1; - - if (pos + dir <= max_pos) { - /* Each bit of port 0 has a LED. */ - clear_bit (pos, &ANNA_PORT_IO(LEDS_PORT)); - pos += dir; - set_bit (pos, &ANNA_PORT_IO(LEDS_PORT)); - } - } - - counter = 0; - } -} |