diff options
Diffstat (limited to 'arch/x86/Kconfig')
| -rw-r--r-- | arch/x86/Kconfig | 136 |
1 files changed, 83 insertions, 53 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index bada636d1065..cc98d5a294ee 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -9,29 +9,55 @@ config 64BIT config X86_32 def_bool y depends on !64BIT + # Options that are inherently 32-bit kernel only: + select ARCH_WANT_IPC_PARSE_VERSION + select CLKSRC_I8253 + select CLONE_BACKWARDS + select HAVE_AOUT + select HAVE_GENERIC_DMA_COHERENT + select MODULES_USE_ELF_REL + select OLD_SIGACTION config X86_64 def_bool y depends on 64BIT + # Options that are inherently 64-bit kernel only: + select ARCH_HAS_GIGANTIC_PAGE + select ARCH_SUPPORTS_INT128 + select ARCH_USE_CMPXCHG_LOCKREF + select HAVE_ARCH_SOFT_DIRTY + select MODULES_USE_ELF_RELA + select X86_DEV_DMA_OPS -### Arch settings +# +# Arch settings +# +# ( Note that options that are marked 'if X86_64' could in principle be +# ported to 32-bit as well. ) +# config X86 def_bool y + # + # Note: keep this list sorted alphabetically + # select ACPI_LEGACY_TABLES_LOOKUP if ACPI select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI select ANON_INODES select ARCH_CLOCKSOURCE_DATA select ARCH_DISCARD_MEMBLOCK - select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI + select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI + select ARCH_HAS_DEBUG_VIRTUAL select ARCH_HAS_DEVMEM_IS_ALLOWED select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_FAST_MULTIPLIER select ARCH_HAS_GCOV_PROFILE_ALL - select ARCH_HAS_GIGANTIC_PAGE if X86_64 select ARCH_HAS_KCOV if X86_64 - select ARCH_HAS_PMEM_API if X86_64 select ARCH_HAS_MMIO_FLUSH + select ARCH_HAS_PMEM_API if X86_64 + select ARCH_HAS_SET_MEMORY select ARCH_HAS_SG_CHAIN + select ARCH_HAS_STRICT_KERNEL_RWX + select ARCH_HAS_STRICT_MODULE_RWX select ARCH_HAS_UBSAN_SANITIZE_ALL select ARCH_HAVE_NMI_SAFE_CMPXCHG select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI @@ -39,23 +65,17 @@ config X86 select ARCH_MIGHT_HAVE_PC_SERIO select ARCH_SUPPORTS_ATOMIC_RMW select ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT - select ARCH_SUPPORTS_INT128 if X86_64 select ARCH_SUPPORTS_NUMA_BALANCING if X86_64 select ARCH_USE_BUILTIN_BSWAP - select ARCH_USE_CMPXCHG_LOCKREF if X86_64 select ARCH_USE_QUEUED_RWLOCKS select ARCH_USE_QUEUED_SPINLOCKS select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH if SMP - select ARCH_WANTS_DYNAMIC_TASK_STRUCT select ARCH_WANT_FRAME_POINTERS - select ARCH_WANT_IPC_PARSE_VERSION if X86_32 + select ARCH_WANTS_DYNAMIC_TASK_STRUCT select BUILDTIME_EXTABLE_SORT select CLKEVT_I8253 - select CLKSRC_I8253 if X86_32 select CLOCKSOURCE_VALIDATE_LAST_CYCLE select CLOCKSOURCE_WATCHDOG - select CLONE_BACKWARDS if X86_32 - select COMPAT_OLD_SIGACTION if IA32_EMULATION select DCACHE_WORD_ACCESS select EDAC_ATOMIC_SCRUB select EDAC_SUPPORT @@ -77,7 +97,6 @@ config X86 select HAVE_ACPI_APEI if ACPI select HAVE_ACPI_APEI_NMI if ACPI select HAVE_ALIGNED_STRUCT_PAGE if SLUB - select HAVE_AOUT if X86_32 select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_HARDENED_USERCOPY select HAVE_ARCH_HUGE_VMAP if X86_64 || X86_PAE @@ -88,12 +107,11 @@ config X86 select HAVE_ARCH_MMAP_RND_BITS if MMU select HAVE_ARCH_MMAP_RND_COMPAT_BITS if MMU && COMPAT select HAVE_ARCH_SECCOMP_FILTER - select HAVE_ARCH_SOFT_DIRTY if X86_64 select HAVE_ARCH_TRACEHOOK select HAVE_ARCH_TRANSPARENT_HUGEPAGE - select HAVE_ARCH_WITHIN_STACK_FRAMES - select HAVE_EBPF_JIT if X86_64 + select HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD if X86_64 select HAVE_ARCH_VMAP_STACK if X86_64 + select HAVE_ARCH_WITHIN_STACK_FRAMES select HAVE_CC_STACKPROTECTOR select HAVE_CMPXCHG_DOUBLE select HAVE_CMPXCHG_LOCAL @@ -106,6 +124,7 @@ config X86 select HAVE_DMA_CONTIGUOUS select HAVE_DYNAMIC_FTRACE select HAVE_DYNAMIC_FTRACE_WITH_REGS + select HAVE_EBPF_JIT if X86_64 select HAVE_EFFICIENT_UNALIGNED_ACCESS select HAVE_EXIT_THREAD select HAVE_FENTRY if X86_64 @@ -113,7 +132,6 @@ config X86 select HAVE_FUNCTION_GRAPH_TRACER select HAVE_FUNCTION_TRACER select HAVE_GCC_PLUGINS - select HAVE_GENERIC_DMA_COHERENT if X86_32 select HAVE_HW_BREAKPOINT select HAVE_IDE select HAVE_IOREMAP_PROT @@ -142,15 +160,11 @@ config X86 select HAVE_PERF_REGS select HAVE_PERF_USER_STACK_DUMP select HAVE_REGS_AND_STACK_ACCESS_API + select HAVE_STACK_VALIDATION if X86_64 select HAVE_SYSCALL_TRACEPOINTS - select HAVE_UID16 if X86_32 || IA32_EMULATION select HAVE_UNSTABLE_SCHED_CLOCK select HAVE_USER_RETURN_NOTIFIER select IRQ_FORCED_THREADING - select MODULES_USE_ELF_RELA if X86_64 - select MODULES_USE_ELF_REL if X86_32 - select OLD_SIGACTION if X86_32 - select OLD_SIGSUSPEND3 if X86_32 || IA32_EMULATION select PERF_EVENTS select RTC_LIB select RTC_MC146818_LIB @@ -160,11 +174,7 @@ config X86 select THREAD_INFO_IN_TASK select USER_STACKTRACE_SUPPORT select VIRT_TO_BUS - select X86_DEV_DMA_OPS if X86_64 select X86_FEATURE_NAMES if PROC_FS - select HAVE_STACK_VALIDATION if X86_64 - select ARCH_USES_HIGH_VMA_FLAGS if X86_INTEL_MEMORY_PROTECTION_KEYS - select ARCH_HAS_PKEYS if X86_INTEL_MEMORY_PROTECTION_KEYS config INSTRUCTION_DECODER def_bool y @@ -304,9 +314,6 @@ config ARCH_SUPPORTS_UPROBES config FIX_EARLYCON_MEM def_bool y -config DEBUG_RODATA - def_bool y - config PGTABLE_LEVELS int default 4 if X86_64 @@ -407,6 +414,19 @@ config GOLDFISH def_bool y depends on X86_GOLDFISH +config INTEL_RDT_A + bool "Intel Resource Director Technology Allocation support" + default n + depends on X86 && CPU_SUP_INTEL + select KERNFS + help + Select to enable resource allocation which is a sub-feature of + Intel Resource Director Technology(RDT). More information about + RDT can be found in the Intel x86 Architecture Software + Developer Manual. + + Say N if unsure. + if X86_32 config X86_EXTENDED_PLATFORM bool "Support for extended (non-PC) x86 platforms" @@ -550,18 +570,6 @@ config X86_INTEL_QUARK Say Y here if you have a Quark based system such as the Arduino compatible Intel Galileo. -config MLX_PLATFORM - tristate "Mellanox Technologies platform support" - depends on X86_64 - depends on X86_EXTENDED_PLATFORM - ---help--- - This option enables system support for the Mellanox Technologies - platform. - - Say Y here if you are building a kernel for Mellanox system. - - Otherwise, say N. - config X86_INTEL_LPSS bool "Intel Low Power Subsystem Support" depends on X86 && ACPI @@ -939,6 +947,27 @@ config SCHED_MC making when dealing with multi-core CPU chips at a cost of slightly increased overhead in some places. If unsure say N here. +config SCHED_MC_PRIO + bool "CPU core priorities scheduler support" + depends on SCHED_MC && CPU_SUP_INTEL + select X86_INTEL_PSTATE + select CPU_FREQ + default y + ---help--- + Intel Turbo Boost Max Technology 3.0 enabled CPUs have a + core ordering determined at manufacturing time, which allows + certain cores to reach higher turbo frequencies (when running + single threaded workloads) than others. + + Enabling this kernel feature teaches the scheduler about + the TBM3 (aka ITMT) priority order of the CPU cores and adjusts the + scheduler's CPU selection logic accordingly, so that higher + overall system performance can be achieved. + + This feature will have no effect on CPUs without this feature. + + If unsure say Y here. + source "kernel/Kconfig.preempt" config UP_LATE_INIT @@ -1025,7 +1054,7 @@ config X86_MCE_INTEL config X86_MCE_AMD def_bool y prompt "AMD MCE features" - depends on X86_MCE && X86_LOCAL_APIC + depends on X86_MCE && X86_LOCAL_APIC && AMD_NB ---help--- Additional support for AMD specific MCE features such as the DRAM Error Threshold. @@ -1043,7 +1072,7 @@ config X86_MCE_THRESHOLD def_bool y config X86_MCE_INJECT - depends on X86_MCE + depends on X86_MCE && X86_LOCAL_APIC tristate "Machine check injector support" ---help--- Provide support for injecting machine checks for testing purposes. @@ -1525,7 +1554,7 @@ config X86_CHECK_BIOS_CORRUPTION line. By default it scans the low 64k of memory every 60 seconds; see the memory_corruption_check_size and memory_corruption_check_period parameters in - Documentation/kernel-parameters.txt to adjust this. + Documentation/admin-guide/kernel-parameters.rst to adjust this. When enabled with the default parameters, this option has almost no overhead, as it reserves a relatively small amount @@ -1737,6 +1766,8 @@ config X86_INTEL_MEMORY_PROTECTION_KEYS def_bool y # Note: only available in 64-bit mode depends on CPU_SUP_INTEL && X86_64 + select ARCH_USES_HIGH_VMA_FLAGS + select ARCH_HAS_PKEYS ---help--- Memory Protection Keys provides a mechanism for enforcing page-based protections, but without requiring modification of the @@ -1965,10 +1996,6 @@ config RANDOMIZE_BASE theoretically possible, but the implementations are further limited due to memory layouts. - If CONFIG_HIBERNATE is also enabled, KASLR is disabled at boot - time. To enable it, boot with "kaslr" on the kernel command - line (which will also disable hibernation). - If unsure, say N. # Relocation on x86 needs some additional build support @@ -2092,7 +2119,7 @@ config DEBUG_HOTPLUG_CPU0 config COMPAT_VDSO def_bool n prompt "Disable the 32-bit vDSO (needed for glibc 2.3.3)" - depends on X86_32 || IA32_EMULATION + depends on COMPAT_32 ---help--- Certain buggy versions of glibc will crash if they are presented with a 32-bit vDSO that is not mapped at the address @@ -2694,9 +2721,10 @@ source "fs/Kconfig.binfmt" config IA32_EMULATION bool "IA32 Emulation" depends on X86_64 + select ARCH_WANT_OLD_COMPAT_IPC select BINFMT_ELF select COMPAT_BINFMT_ELF - select ARCH_WANT_OLD_COMPAT_IPC + select COMPAT_OLD_SIGACTION ---help--- Include code to run legacy 32-bit programs under a 64-bit kernel. You should likely turn this on, unless you're @@ -2721,6 +2749,12 @@ config X86_X32 elf32_x86_64 support enabled to compile a kernel with this option set. +config COMPAT_32 + def_bool y + depends on IA32_EMULATION || X86_32 + select HAVE_UID16 + select OLD_SIGSUSPEND3 + config COMPAT def_bool y depends on IA32_EMULATION || X86_X32 @@ -2753,10 +2787,6 @@ config X86_DMA_REMAP bool depends on STA2X11 -config PMC_ATOM - def_bool y - depends on PCI - source "net/Kconfig" source "drivers/Kconfig" |