diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/x86/kernel/apic/apic.c | 79 |
1 files changed, 64 insertions, 15 deletions
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index b70344bf6600..c6876d3ea4b1 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -61,6 +61,7 @@ #include <asm/cpu_device_id.h> #include <asm/intel-family.h> #include <asm/irq_regs.h> +#include <asm/cpu.h> unsigned int num_processors; @@ -170,7 +171,7 @@ static __init int setup_apicpmtimer(char *s) { apic_calibrate_pmtmr = 1; notsc_setup(NULL); - return 0; + return 1; } __setup("apicpmtimer", setup_apicpmtimer); #endif @@ -275,7 +276,7 @@ void native_apic_icr_write(u32 low, u32 id) unsigned long flags; local_irq_save(flags); - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id)); + apic_write(APIC_ICR2, SET_XAPIC_DEST_FIELD(id)); apic_write(APIC_ICR, low); local_irq_restore(flags); } @@ -320,6 +321,9 @@ int lapic_get_maxlvt(void) #define APIC_DIVISOR 16 #define TSC_DIVISOR 8 +/* i82489DX specific */ +#define I82489DX_BASE_DIVIDER (((0x2) << 18)) + /* * This function sets up the local APIC timer, with a timeout of * 'clocks' APIC bus clock. During calibration we actually call @@ -340,8 +344,14 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) else if (boot_cpu_has(X86_FEATURE_TSC_DEADLINE_TIMER)) lvtt_value |= APIC_LVT_TIMER_TSCDEADLINE; + /* + * The i82489DX APIC uses bit 18 and 19 for the base divider. This + * overlaps with bit 18 on integrated APICs, but is not documented + * in the SDM. No problem though. i82489DX equipped systems do not + * have TSC deadline timer. + */ if (!lapic_is_integrated()) - lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV); + lvtt_value |= I82489DX_BASE_DIVIDER; if (!irqen) lvtt_value |= APIC_LVT_MASKED; @@ -1106,11 +1116,6 @@ DEFINE_IDTENTRY_SYSVEC(sysvec_apic_timer_interrupt) set_irq_regs(old_regs); } -int setup_profiling_timer(unsigned int multiplier) -{ - return -EINVAL; -} - /* * Local APIC start and shutdown */ @@ -1419,22 +1424,21 @@ void __init apic_intr_mode_init(void) return; case APIC_VIRTUAL_WIRE: pr_info("APIC: Switch to virtual wire mode setup\n"); - default_setup_apic_routing(); break; case APIC_VIRTUAL_WIRE_NO_CONFIG: pr_info("APIC: Switch to virtual wire mode setup with no configuration\n"); upmode = true; - default_setup_apic_routing(); break; case APIC_SYMMETRIC_IO: pr_info("APIC: Switch to symmetric I/O mode setup\n"); - default_setup_apic_routing(); break; case APIC_SYMMETRIC_IO_NO_ROUTING: pr_info("APIC: Switch to symmetric I/O mode setup in no SMP routine\n"); break; } + default_setup_apic_routing(); + if (x86_platform.apic_post_init) x86_platform.apic_post_init(); @@ -1748,11 +1752,26 @@ EXPORT_SYMBOL_GPL(x2apic_mode); enum { X2APIC_OFF, - X2APIC_ON, X2APIC_DISABLED, + /* All states below here have X2APIC enabled */ + X2APIC_ON, + X2APIC_ON_LOCKED }; static int x2apic_state; +static bool x2apic_hw_locked(void) +{ + u64 ia32_cap; + u64 msr; + + ia32_cap = x86_read_arch_cap_msr(); + if (ia32_cap & ARCH_CAP_XAPIC_DISABLE) { + rdmsrl(MSR_IA32_XAPIC_DISABLE_STATUS, msr); + return (msr & LEGACY_XAPIC_DISABLED); + } + return false; +} + static void __x2apic_disable(void) { u64 msr; @@ -1790,6 +1809,10 @@ static int __init setup_nox2apic(char *str) apicid); return 0; } + if (x2apic_hw_locked()) { + pr_warn("APIC locked in x2apic mode, can't disable\n"); + return 0; + } pr_warn("x2apic already enabled.\n"); __x2apic_disable(); } @@ -1804,10 +1827,18 @@ early_param("nox2apic", setup_nox2apic); void x2apic_setup(void) { /* - * If x2apic is not in ON state, disable it if already enabled + * Try to make the AP's APIC state match that of the BSP, but if the + * BSP is unlocked and the AP is locked then there is a state mismatch. + * Warn about the mismatch in case a GP fault occurs due to a locked AP + * trying to be turned off. + */ + if (x2apic_state != X2APIC_ON_LOCKED && x2apic_hw_locked()) + pr_warn("x2apic lock mismatch between BSP and AP.\n"); + /* + * If x2apic is not in ON or LOCKED state, disable it if already enabled * from BIOS. */ - if (x2apic_state != X2APIC_ON) { + if (x2apic_state < X2APIC_ON) { __x2apic_disable(); return; } @@ -1828,6 +1859,11 @@ static __init void x2apic_disable(void) if (x2apic_id >= 255) panic("Cannot disable x2apic, id: %08x\n", x2apic_id); + if (x2apic_hw_locked()) { + pr_warn("Cannot disable locked x2apic, id: %08x\n", x2apic_id); + return; + } + __x2apic_disable(); register_lapic_address(mp_lapic_addr); } @@ -1886,7 +1922,10 @@ void __init check_x2apic(void) if (x2apic_enabled()) { pr_info("x2apic: enabled by BIOS, switching to x2apic ops\n"); x2apic_mode = 1; - x2apic_state = X2APIC_ON; + if (x2apic_hw_locked()) + x2apic_state = X2APIC_ON_LOCKED; + else + x2apic_state = X2APIC_ON; } else if (!boot_cpu_has(X86_FEATURE_X2APIC)) { x2apic_state = X2APIC_DISABLED; } @@ -2551,6 +2590,16 @@ u32 x86_msi_msg_get_destid(struct msi_msg *msg, bool extid) } EXPORT_SYMBOL_GPL(x86_msi_msg_get_destid); +#ifdef CONFIG_X86_64 +void __init acpi_wake_cpu_handler_update(wakeup_cpu_handler handler) +{ + struct apic **drv; + + for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) + (*drv)->wakeup_secondary_cpu_64 = handler; +} +#endif + /* * Override the generic EOI implementation with an optimized version. * Only called during early boot when only one CPU is active and with |