diff options
Diffstat (limited to 'arch/x86/kernel/entry_64.S')
| -rw-r--r-- | arch/x86/kernel/entry_64.S | 113 |
1 files changed, 52 insertions, 61 deletions
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index df088bb03fb3..9ebaf63ba182 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -652,6 +652,20 @@ ENTRY(stub_execve) CFI_ENDPROC END(stub_execve) +ENTRY(stub_execveat) + CFI_STARTPROC + addq $8, %rsp + PARTIAL_FRAME 0 + SAVE_REST + FIXUP_TOP_OF_STACK %r11 + call sys_execveat + RESTORE_TOP_OF_STACK %r11 + movq %rax,RAX(%rsp) + RESTORE_REST + jmp int_ret_from_sys_call + CFI_ENDPROC +END(stub_execveat) + /* * sigreturn is special because it needs to restore all registers on return. * This cannot be done with SYSRET, so use the IRET return path instead. @@ -697,6 +711,20 @@ ENTRY(stub_x32_execve) CFI_ENDPROC END(stub_x32_execve) +ENTRY(stub_x32_execveat) + CFI_STARTPROC + addq $8, %rsp + PARTIAL_FRAME 0 + SAVE_REST + FIXUP_TOP_OF_STACK %r11 + call compat_sys_execveat + RESTORE_TOP_OF_STACK %r11 + movq %rax,RAX(%rsp) + RESTORE_REST + jmp int_ret_from_sys_call + CFI_ENDPROC +END(stub_x32_execveat) + #endif /* @@ -712,10 +740,10 @@ ENTRY(interrupt) ENTRY(irq_entries_start) INTR_FRAME vector=FIRST_EXTERNAL_VECTOR -.rept (NR_VECTORS-FIRST_EXTERNAL_VECTOR+6)/7 +.rept (FIRST_SYSTEM_VECTOR-FIRST_EXTERNAL_VECTOR+6)/7 .balign 32 .rept 7 - .if vector < NR_VECTORS + .if vector < FIRST_SYSTEM_VECTOR .if vector <> FIRST_EXTERNAL_VECTOR CFI_ADJUST_CFA_OFFSET -8 .endif @@ -828,9 +856,15 @@ ENTRY(native_iret) jnz native_irq_return_ldt #endif +.global native_irq_return_iret native_irq_return_iret: + /* + * This may fault. Non-paranoid faults on return to userspace are + * handled by fixup_bad_iret. These include #SS, #GP, and #NP. + * Double-faults due to espfix64 are handled in do_double_fault. + * Other faults here are fatal. + */ iretq - _ASM_EXTABLE(native_irq_return_iret, bad_iret) #ifdef CONFIG_X86_ESPFIX64 native_irq_return_ldt: @@ -858,25 +892,6 @@ native_irq_return_ldt: jmp native_irq_return_iret #endif - .section .fixup,"ax" -bad_iret: - /* - * The iret traps when the %cs or %ss being restored is bogus. - * We've lost the original trap vector and error code. - * #GPF is the most likely one to get for an invalid selector. - * So pretend we completed the iret and took the #GPF in user mode. - * - * We are now running with the kernel GS after exception recovery. - * But error_entry expects us to have user GS to match the user %cs, - * so swap back. - */ - pushq $0 - - SWAPGS - jmp general_protection - - .previous - /* edi: workmask, edx: work */ retint_careful: CFI_RESTORE_STATE @@ -922,37 +937,6 @@ ENTRY(retint_kernel) CFI_ENDPROC END(common_interrupt) - /* - * If IRET takes a fault on the espfix stack, then we - * end up promoting it to a doublefault. In that case, - * modify the stack to make it look like we just entered - * the #GP handler from user space, similar to bad_iret. - */ -#ifdef CONFIG_X86_ESPFIX64 - ALIGN -__do_double_fault: - XCPT_FRAME 1 RDI+8 - movq RSP(%rdi),%rax /* Trap on the espfix stack? */ - sarq $PGDIR_SHIFT,%rax - cmpl $ESPFIX_PGD_ENTRY,%eax - jne do_double_fault /* No, just deliver the fault */ - cmpl $__KERNEL_CS,CS(%rdi) - jne do_double_fault - movq RIP(%rdi),%rax - cmpq $native_irq_return_iret,%rax - jne do_double_fault /* This shouldn't happen... */ - movq PER_CPU_VAR(kernel_stack),%rax - subq $(6*8-KERNEL_STACK_OFFSET),%rax /* Reset to original stack */ - movq %rax,RSP(%rdi) - movq $0,(%rax) /* Missing (lost) #GP error code */ - movq $general_protection,RIP(%rdi) - retq - CFI_ENDPROC -END(__do_double_fault) -#else -# define __do_double_fault do_double_fault -#endif - /* * APIC interrupts. */ @@ -1124,7 +1108,7 @@ idtentry overflow do_overflow has_error_code=0 idtentry bounds do_bounds has_error_code=0 idtentry invalid_op do_invalid_op has_error_code=0 idtentry device_not_available do_device_not_available has_error_code=0 -idtentry double_fault __do_double_fault has_error_code=1 paranoid=1 +idtentry double_fault do_double_fault has_error_code=1 paranoid=1 idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0 idtentry invalid_TSS do_invalid_TSS has_error_code=1 idtentry segment_not_present do_segment_not_present has_error_code=1 @@ -1289,7 +1273,7 @@ apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK -idtentry stack_segment do_stack_segment has_error_code=1 paranoid=1 +idtentry stack_segment do_stack_segment has_error_code=1 #ifdef CONFIG_XEN idtentry xen_debug do_debug has_error_code=0 idtentry xen_int3 do_int3 has_error_code=0 @@ -1399,17 +1383,16 @@ error_sti: /* * There are two places in the kernel that can potentially fault with - * usergs. Handle them here. The exception handlers after iret run with - * kernel gs again, so don't set the user space flag. B stepping K8s - * sometimes report an truncated RIP for IRET exceptions returning to - * compat mode. Check for these here too. + * usergs. Handle them here. B stepping K8s sometimes report a + * truncated RIP for IRET exceptions returning to compat mode. Check + * for these here too. */ error_kernelspace: CFI_REL_OFFSET rcx, RCX+8 incl %ebx leaq native_irq_return_iret(%rip),%rcx cmpq %rcx,RIP+8(%rsp) - je error_swapgs + je error_bad_iret movl %ecx,%eax /* zero extend */ cmpq %rax,RIP+8(%rsp) je bstep_iret @@ -1420,7 +1403,15 @@ error_kernelspace: bstep_iret: /* Fix truncated RIP */ movq %rcx,RIP+8(%rsp) - jmp error_swapgs + /* fall through */ + +error_bad_iret: + SWAPGS + mov %rsp,%rdi + call fixup_bad_iret + mov %rax,%rsp + decl %ebx /* Return to usergs */ + jmp error_sti CFI_ENDPROC END(error_entry) |