1 files changed, 0 insertions, 357 deletions
diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c
deleted file mode 100644
index 1784b8077a12..000000000000
--- a/arch/x86/kernel/tsc_64.c
+++ /dev/null
@@ -1,357 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/clocksource.h>
-#include <linux/time.h>
-#include <linux/acpi.h>
-#include <linux/cpufreq.h>
-#include <linux/acpi_pmtmr.h>
-
-#include <asm/hpet.h>
-#include <asm/timex.h>
-#include <asm/timer.h>
-#include <asm/vgtod.h>
-
-static int notsc __initdata = 0;
-
-unsigned int cpu_khz;		/* TSC clocks / usec, not used here */
-EXPORT_SYMBOL(cpu_khz);
-unsigned int tsc_khz;
-EXPORT_SYMBOL(tsc_khz);
-
-/* Accelerators for sched_clock()
- * convert from cycles(64bits) => nanoseconds (64bits)
- *  basic equation:
- *		ns = cycles / (freq / ns_per_sec)
- *		ns = cycles * (ns_per_sec / freq)
- *		ns = cycles * (10^9 / (cpu_khz * 10^3))
- *		ns = cycles * (10^6 / cpu_khz)
- *
- *	Then we use scaling math (suggested by george@mvista.com) to get:
- *		ns = cycles * (10^6 * SC / cpu_khz) / SC
- *		ns = cycles * cyc2ns_scale / SC
- *
- *	And since SC is a constant power of two, we can convert the div
- *  into a shift.
- *
- *  We can use khz divisor instead of mhz to keep a better precision, since
- *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
- *  (mathieu.desnoyers@polymtl.ca)
- *
- *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
- */
-DEFINE_PER_CPU(unsigned long, cyc2ns);
-
-static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
-{
-	unsigned long long tsc_now, ns_now;
-	unsigned long flags, *scale;
-
-	local_irq_save(flags);
-	sched_clock_idle_sleep_event();
-
-	scale = &per_cpu(cyc2ns, cpu);
-
-	rdtscll(tsc_now);
-	ns_now = __cycles_2_ns(tsc_now);
-
-	if (cpu_khz)
-		*scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz;
-
-	sched_clock_idle_wakeup_event(0);
-	local_irq_restore(flags);
-}
-
-unsigned long long native_sched_clock(void)
-{
-	unsigned long a = 0;
-
-	/* Could do CPU core sync here. Opteron can execute rdtsc speculatively,
-	 * which means it is not completely exact and may not be monotonous
-	 * between CPUs. But the errors should be too small to matter for
-	 * scheduling purposes.
-	 */
-
-	rdtscll(a);
-	return cycles_2_ns(a);
-}
-
-/* We need to define a real function for sched_clock, to override the
-   weak default version */
-#ifdef CONFIG_PARAVIRT
-unsigned long long sched_clock(void)
-{
-	return paravirt_sched_clock();
-}
-#else
-unsigned long long
-sched_clock(void) __attribute__((alias("native_sched_clock")));
-#endif
-
-
-static int tsc_unstable;
-
-int check_tsc_unstable(void)
-{
-	return tsc_unstable;
-}
-EXPORT_SYMBOL_GPL(check_tsc_unstable);
-
-#ifdef CONFIG_CPU_FREQ
-
-/* Frequency scaling support. Adjust the TSC based timer when the cpu frequency
- * changes.
- *
- * RED-PEN: On SMP we assume all CPUs run with the same frequency.  It's
- * not that important because current Opteron setups do not support
- * scaling on SMP anyroads.
- *
- * Should fix up last_tsc too. Currently gettimeofday in the
- * first tick after the change will be slightly wrong.
- */
-
-static unsigned int  ref_freq;
-static unsigned long loops_per_jiffy_ref;
-static unsigned long tsc_khz_ref;
-
-static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
-				 void *data)
-{
-	struct cpufreq_freqs *freq = data;
-	unsigned long *lpj, dummy;
-
-	if (cpu_has(&cpu_data(freq->cpu), X86_FEATURE_CONSTANT_TSC))
-		return 0;
-
-	lpj = &dummy;
-	if (!(freq->flags & CPUFREQ_CONST_LOOPS))
-#ifdef CONFIG_SMP
-		lpj = &cpu_data(freq->cpu).loops_per_jiffy;
-#else
-		lpj = &boot_cpu_data.loops_per_jiffy;
-#endif
-
-	if (!ref_freq) {
-		ref_freq = freq->old;
-		loops_per_jiffy_ref = *lpj;
-		tsc_khz_ref = tsc_khz;
-	}
-	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
-		(val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
-		(val == CPUFREQ_RESUMECHANGE)) {
-		*lpj =
-		cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
-
-		tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new);
-		if (!(freq->flags & CPUFREQ_CONST_LOOPS))
-			mark_tsc_unstable("cpufreq changes");
-	}
-
-	set_cyc2ns_scale(tsc_khz_ref, freq->cpu);
-
-	return 0;
-}
-
-static struct notifier_block time_cpufreq_notifier_block = {
-	.notifier_call  = time_cpufreq_notifier
-};
-
-static int __init cpufreq_tsc(void)
-{
-	cpufreq_register_notifier(&time_cpufreq_notifier_block,
-				  CPUFREQ_TRANSITION_NOTIFIER);
-	return 0;
-}
-
-core_initcall(cpufreq_tsc);
-
-#endif
-
-#define MAX_RETRIES	5
-#define SMI_TRESHOLD	50000
-
-/*
- * Read TSC and the reference counters. Take care of SMI disturbance
- */
-static unsigned long __init tsc_read_refs(unsigned long *pm,
-					  unsigned long *hpet)
-{
-	unsigned long t1, t2;
-	int i;
-
-	for (i = 0; i < MAX_RETRIES; i++) {
-		t1 = get_cycles();
-		if (hpet)
-			*hpet = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF;
-		else
-			*pm = acpi_pm_read_early();
-		t2 = get_cycles();
-		if ((t2 - t1) < SMI_TRESHOLD)
-			return t2;
-	}
-	return ULONG_MAX;
-}
-
-/**
- * tsc_calibrate - calibrate the tsc on boot
- */
-void __init tsc_calibrate(void)
-{
-	unsigned long flags, tsc1, tsc2, tr1, tr2, pm1, pm2, hpet1, hpet2;
-	int hpet = is_hpet_enabled(), cpu;
-
-	local_irq_save(flags);
-
-	tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
-
-	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
-
-	outb(0xb0, 0x43);
-	outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
-	outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
-	tr1 = get_cycles();
-	while ((inb(0x61) & 0x20) == 0);
-	tr2 = get_cycles();
-
-	tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
-
-	local_irq_restore(flags);
-
-	/*
-	 * Preset the result with the raw and inaccurate PIT
-	 * calibration value
-	 */
-	tsc_khz = (tr2 - tr1) / 50;
-
-	/* hpet or pmtimer available ? */
-	if (!hpet && !pm1 && !pm2) {
-		printk(KERN_INFO "TSC calibrated against PIT\n");
-		goto out;
-	}
-
-	/* Check, whether the sampling was disturbed by an SMI */
-	if (tsc1 == ULONG_MAX || tsc2 == ULONG_MAX) {
-		printk(KERN_WARNING "TSC calibration disturbed by SMI, "
-		       "using PIT calibration result\n");
-		goto out;
-	}
-
-	tsc2 = (tsc2 - tsc1) * 1000000L;
-
-	if (hpet) {
-		printk(KERN_INFO "TSC calibrated against HPET\n");
-		if (hpet2 < hpet1)
-			hpet2 += 0x100000000;
-		hpet2 -= hpet1;
-		tsc1 = (hpet2 * hpet_readl(HPET_PERIOD)) / 1000000;
-	} else {
-		printk(KERN_INFO "TSC calibrated against PM_TIMER\n");
-		if (pm2 < pm1)
-			pm2 += ACPI_PM_OVRRUN;
-		pm2 -= pm1;
-		tsc1 = (pm2 * 1000000000) / PMTMR_TICKS_PER_SEC;
-	}
-
-	tsc_khz = tsc2 / tsc1;
-
-out:
-	for_each_possible_cpu(cpu)
-		set_cyc2ns_scale(tsc_khz, cpu);
-}
-
-/*
- * Make an educated guess if the TSC is trustworthy and synchronized
- * over all CPUs.
- */
-__cpuinit int unsynchronized_tsc(void)
-{
-	if (tsc_unstable)
-		return 1;
-
-#ifdef CONFIG_SMP
-	if (apic_is_clustered_box())
-		return 1;
-#endif
-
-	if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
-		return 0;
-
-	/* Assume multi socket systems are not synchronized */
-	return num_present_cpus() > 1;
-}
-
-int __init notsc_setup(char *s)
-{
-	notsc = 1;
-	return 1;
-}
-
-__setup("notsc", notsc_setup);
-
-static struct clocksource clocksource_tsc;
-
-/*
- * We compare the TSC to the cycle_last value in the clocksource
- * structure to avoid a nasty time-warp. This can be observed in a
- * very small window right after one CPU updated cycle_last under
- * xtime/vsyscall_gtod lock and the other CPU reads a TSC value which
- * is smaller than the cycle_last reference value due to a TSC which
- * is slighty behind. This delta is nowhere else observable, but in
- * that case it results in a forward time jump in the range of hours
- * due to the unsigned delta calculation of the time keeping core
- * code, which is necessary to support wrapping clocksources like pm
- * timer.
- */
-static cycle_t read_tsc(void)
-{
-	cycle_t ret = (cycle_t)get_cycles();
-
-	return ret >= clocksource_tsc.cycle_last ?
-		ret : clocksource_tsc.cycle_last;
-}
-
-static cycle_t __vsyscall_fn vread_tsc(void)
-{
-	cycle_t ret = (cycle_t)vget_cycles();
-
-	return ret >= __vsyscall_gtod_data.clock.cycle_last ?
-		ret : __vsyscall_gtod_data.clock.cycle_last;
-}
-
-static struct clocksource clocksource_tsc = {
-	.name			= "tsc",
-	.rating			= 300,
-	.read			= read_tsc,
-	.mask			= CLOCKSOURCE_MASK(64),
-	.shift			= 22,
-	.flags			= CLOCK_SOURCE_IS_CONTINUOUS |
-				  CLOCK_SOURCE_MUST_VERIFY,
-	.vread			= vread_tsc,
-};
-
-void mark_tsc_unstable(char *reason)
-{
-	if (!tsc_unstable) {
-		tsc_unstable = 1;
-		printk("Marking TSC unstable due to %s\n", reason);
-		/* Change only the rating, when not registered */
-		if (clocksource_tsc.mult)
-			clocksource_change_rating(&clocksource_tsc, 0);
-		else
-			clocksource_tsc.rating = 0;
-	}
-}
-EXPORT_SYMBOL_GPL(mark_tsc_unstable);
-
-void __init init_tsc_clocksource(void)
-{
-	if (!notsc) {
-		clocksource_tsc.mult = clocksource_khz2mult(tsc_khz,
-							clocksource_tsc.shift);
-		if (check_tsc_unstable())
-			clocksource_tsc.rating = 0;
-
-		clocksource_register(&clocksource_tsc);
-	}
-}