diff options
Diffstat (limited to 'arch/x86/vdso/vdso32/sigreturn.S')
| -rw-r--r-- | arch/x86/vdso/vdso32/sigreturn.S | 144 |
1 files changed, 144 insertions, 0 deletions
diff --git a/arch/x86/vdso/vdso32/sigreturn.S b/arch/x86/vdso/vdso32/sigreturn.S new file mode 100644 index 000000000000..31776d0efc8c --- /dev/null +++ b/arch/x86/vdso/vdso32/sigreturn.S @@ -0,0 +1,144 @@ +/* + * Common code for the sigreturn entry points in vDSO images. + * So far this code is the same for both int80 and sysenter versions. + * This file is #include'd by int80.S et al to define them first thing. + * The kernel assumes that the addresses of these routines are constant + * for all vDSO implementations. + */ + +#include <linux/linkage.h> +#include <asm/unistd_32.h> +#include <asm/asm-offsets.h> + +#ifndef SYSCALL_ENTER_KERNEL +#define SYSCALL_ENTER_KERNEL int $0x80 +#endif + + .text + .globl __kernel_sigreturn + .type __kernel_sigreturn,@function + ALIGN +__kernel_sigreturn: +.LSTART_sigreturn: + popl %eax /* XXX does this mean it needs unwind info? */ + movl $__NR_sigreturn, %eax + SYSCALL_ENTER_KERNEL +.LEND_sigreturn: + nop + .size __kernel_sigreturn,.-.LSTART_sigreturn + + .globl __kernel_rt_sigreturn + .type __kernel_rt_sigreturn,@function + ALIGN +__kernel_rt_sigreturn: +.LSTART_rt_sigreturn: + movl $__NR_rt_sigreturn, %eax + SYSCALL_ENTER_KERNEL +.LEND_rt_sigreturn: + nop + .size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn + .previous + + .section .eh_frame,"a",@progbits +.LSTARTFRAMEDLSI1: + .long .LENDCIEDLSI1-.LSTARTCIEDLSI1 +.LSTARTCIEDLSI1: + .long 0 /* CIE ID */ + .byte 1 /* Version number */ + .string "zRS" /* NUL-terminated augmentation string */ + .uleb128 1 /* Code alignment factor */ + .sleb128 -4 /* Data alignment factor */ + .byte 8 /* Return address register column */ + .uleb128 1 /* Augmentation value length */ + .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */ + .byte 0 /* DW_CFA_nop */ + .align 4 +.LENDCIEDLSI1: + .long .LENDFDEDLSI1-.LSTARTFDEDLSI1 /* Length FDE */ +.LSTARTFDEDLSI1: + .long .LSTARTFDEDLSI1-.LSTARTFRAMEDLSI1 /* CIE pointer */ + /* HACK: The dwarf2 unwind routines will subtract 1 from the + return address to get an address in the middle of the + presumed call instruction. Since we didn't get here via + a call, we need to include the nop before the real start + to make up for it. */ + .long .LSTART_sigreturn-1-. /* PC-relative start address */ + .long .LEND_sigreturn-.LSTART_sigreturn+1 + .uleb128 0 /* Augmentation */ + /* What follows are the instructions for the table generation. + We record the locations of each register saved. This is + complicated by the fact that the "CFA" is always assumed to + be the value of the stack pointer in the caller. This means + that we must define the CFA of this body of code to be the + saved value of the stack pointer in the sigcontext. Which + also means that there is no fixed relation to the other + saved registers, which means that we must use DW_CFA_expression + to compute their addresses. It also means that when we + adjust the stack with the popl, we have to do it all over again. */ + +#define do_cfa_expr(offset) \ + .byte 0x0f; /* DW_CFA_def_cfa_expression */ \ + .uleb128 1f-0f; /* length */ \ +0: .byte 0x74; /* DW_OP_breg4 */ \ + .sleb128 offset; /* offset */ \ + .byte 0x06; /* DW_OP_deref */ \ +1: + +#define do_expr(regno, offset) \ + .byte 0x10; /* DW_CFA_expression */ \ + .uleb128 regno; /* regno */ \ + .uleb128 1f-0f; /* length */ \ +0: .byte 0x74; /* DW_OP_breg4 */ \ + .sleb128 offset; /* offset */ \ +1: + + do_cfa_expr(IA32_SIGCONTEXT_sp+4) + do_expr(0, IA32_SIGCONTEXT_ax+4) + do_expr(1, IA32_SIGCONTEXT_cx+4) + do_expr(2, IA32_SIGCONTEXT_dx+4) + do_expr(3, IA32_SIGCONTEXT_bx+4) + do_expr(5, IA32_SIGCONTEXT_bp+4) + do_expr(6, IA32_SIGCONTEXT_si+4) + do_expr(7, IA32_SIGCONTEXT_di+4) + do_expr(8, IA32_SIGCONTEXT_ip+4) + + .byte 0x42 /* DW_CFA_advance_loc 2 -- nop; popl eax. */ + + do_cfa_expr(IA32_SIGCONTEXT_sp) + do_expr(0, IA32_SIGCONTEXT_ax) + do_expr(1, IA32_SIGCONTEXT_cx) + do_expr(2, IA32_SIGCONTEXT_dx) + do_expr(3, IA32_SIGCONTEXT_bx) + do_expr(5, IA32_SIGCONTEXT_bp) + do_expr(6, IA32_SIGCONTEXT_si) + do_expr(7, IA32_SIGCONTEXT_di) + do_expr(8, IA32_SIGCONTEXT_ip) + + .align 4 +.LENDFDEDLSI1: + + .long .LENDFDEDLSI2-.LSTARTFDEDLSI2 /* Length FDE */ +.LSTARTFDEDLSI2: + .long .LSTARTFDEDLSI2-.LSTARTFRAMEDLSI1 /* CIE pointer */ + /* HACK: See above wrt unwind library assumptions. */ + .long .LSTART_rt_sigreturn-1-. /* PC-relative start address */ + .long .LEND_rt_sigreturn-.LSTART_rt_sigreturn+1 + .uleb128 0 /* Augmentation */ + /* What follows are the instructions for the table generation. + We record the locations of each register saved. This is + slightly less complicated than the above, since we don't + modify the stack pointer in the process. */ + + do_cfa_expr(IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_sp) + do_expr(0, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ax) + do_expr(1, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_cx) + do_expr(2, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_dx) + do_expr(3, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_bx) + do_expr(5, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_bp) + do_expr(6, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_si) + do_expr(7, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_di) + do_expr(8, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ip) + + .align 4 +.LENDFDEDLSI2: + .previous |