diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/powerpc/kernel/machine_kexec_64.c | 5 | ||||
| -rw-r--r-- | arch/powerpc/kernel/prom.c | 89 | ||||
| -rw-r--r-- | arch/powerpc/kernel/prom_init.c | 55 | ||||
| -rw-r--r-- | arch/powerpc/kernel/setup_64.c | 3 | ||||
| -rw-r--r-- | arch/powerpc/mm/lmb.c | 43 | ||||
| -rw-r--r-- | arch/powerpc/platforms/iseries/setup.c | 22 |
6 files changed, 89 insertions, 128 deletions
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index ee166c586642..1ccb188ba40d 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -339,3 +339,8 @@ void __init kexec_setup(void) { export_htab_values(); } + +int overlaps_crashkernel(unsigned long start, unsigned long size) +{ + return (start + size) > crashk_res.start && start <= crashk_res.end; +} diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 4ca608c9cd72..a04f726d3bab 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -50,6 +50,7 @@ #include <asm/machdep.h> #include <asm/pSeries_reconfig.h> #include <asm/pci-bridge.h> +#include <asm/kexec.h> #ifdef DEBUG #define DBG(fmt...) printk(KERN_ERR fmt) @@ -836,6 +837,42 @@ static unsigned long __init unflatten_dt_node(unsigned long mem, return mem; } +static int __init early_parse_mem(char *p) +{ + if (!p) + return 1; + + memory_limit = PAGE_ALIGN(memparse(p, &p)); + DBG("memory limit = 0x%lx\n", memory_limit); + + return 0; +} +early_param("mem", early_parse_mem); + +/* + * The device tree may be allocated below our memory limit, or inside the + * crash kernel region for kdump. If so, move it out now. + */ +static void move_device_tree(void) +{ + unsigned long start, size; + void *p; + + DBG("-> move_device_tree\n"); + + start = __pa(initial_boot_params); + size = initial_boot_params->totalsize; + + if ((memory_limit && (start + size) > memory_limit) || + overlaps_crashkernel(start, size)) { + p = __va(lmb_alloc_base(size, PAGE_SIZE, lmb.rmo_size)); + memcpy(p, initial_boot_params, size); + initial_boot_params = (struct boot_param_header *)p; + DBG("Moved device tree to 0x%p\n", p); + } + + DBG("<- move_device_tree\n"); +} /** * unflattens the device-tree passed by the firmware, creating the @@ -1070,6 +1107,7 @@ static int __init early_init_dt_scan_chosen(unsigned long node, iommu_force_on = 1; #endif + /* mem=x on the command line is the preferred mechanism */ lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL); if (lprop) memory_limit = *lprop; @@ -1123,17 +1161,6 @@ static int __init early_init_dt_scan_chosen(unsigned long node, DBG("Command line is: %s\n", cmd_line); - if (strstr(cmd_line, "mem=")) { - char *p, *q; - - for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) { - q = p + 4; - if (p > cmd_line && p[-1] != ' ') - continue; - memory_limit = memparse(q, &q); - } - } - /* break now */ return 1; } @@ -1297,11 +1324,6 @@ void __init early_init_devtree(void *params) strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); parse_early_param(); - lmb_enforce_memory_limit(memory_limit); - lmb_analyze(); - - DBG("Phys. mem: %lx\n", lmb_phys_mem_size()); - /* Reserve LMB regions used by kernel, initrd, dt, etc... */ lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START); #ifdef CONFIG_CRASH_DUMP @@ -1309,6 +1331,15 @@ void __init early_init_devtree(void *params) #endif early_reserve_mem(); + lmb_enforce_memory_limit(memory_limit); + lmb_analyze(); + + DBG("Phys. mem: %lx\n", lmb_phys_mem_size()); + + /* We may need to relocate the flat tree, do it now. + * FIXME .. and the initrd too? */ + move_device_tree(); + DBG("Scanning CPUs ...\n"); /* Retreive CPU related informations from the flat tree @@ -2058,29 +2089,3 @@ int prom_update_property(struct device_node *np, return 0; } -#ifdef CONFIG_KEXEC -/* We may have allocated the flat device tree inside the crash kernel region - * in prom_init. If so we need to move it out into regular memory. */ -void kdump_move_device_tree(void) -{ - unsigned long start, end; - struct boot_param_header *new; - - start = __pa((unsigned long)initial_boot_params); - end = start + initial_boot_params->totalsize; - - if (end < crashk_res.start || start > crashk_res.end) - return; - - new = (struct boot_param_header*) - __va(lmb_alloc(initial_boot_params->totalsize, PAGE_SIZE)); - - memcpy(new, initial_boot_params, initial_boot_params->totalsize); - - initial_boot_params = new; - - DBG("Flat device tree blob moved to %p\n", initial_boot_params); - - /* XXX should we unreserve the old DT? */ -} -#endif /* CONFIG_KEXEC */ diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 078fb5533541..a52377c68fc6 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -194,8 +194,6 @@ static int __initdata of_platform; static char __initdata prom_cmd_line[COMMAND_LINE_SIZE]; -static unsigned long __initdata prom_memory_limit; - static unsigned long __initdata alloc_top; static unsigned long __initdata alloc_top_high; static unsigned long __initdata alloc_bottom; @@ -594,16 +592,6 @@ static void __init early_cmdline_parse(void) } #endif - opt = strstr(RELOC(prom_cmd_line), RELOC("mem=")); - if (opt) { - opt += 4; - RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt); -#ifdef CONFIG_PPC64 - /* Align to 16 MB == size of ppc64 large page */ - RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000); -#endif - } - #ifdef CONFIG_KEXEC /* * crashkernel=size@addr specifies the location to reserve for @@ -1115,29 +1103,6 @@ static void __init prom_init_mem(void) } /* - * If prom_memory_limit is set we reduce the upper limits *except* for - * alloc_top_high. This must be the real top of RAM so we can put - * TCE's up there. - */ - - RELOC(alloc_top_high) = RELOC(ram_top); - - if (RELOC(prom_memory_limit)) { - if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) { - prom_printf("Ignoring mem=%x <= alloc_bottom.\n", - RELOC(prom_memory_limit)); - RELOC(prom_memory_limit) = 0; - } else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) { - prom_printf("Ignoring mem=%x >= ram_top.\n", - RELOC(prom_memory_limit)); - RELOC(prom_memory_limit) = 0; - } else { - RELOC(ram_top) = RELOC(prom_memory_limit); - RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit)); - } - } - - /* * Setup our top alloc point, that is top of RMO or top of * segment 0 when running non-LPAR. * Some RS64 machines have buggy firmware where claims up at @@ -1149,9 +1114,9 @@ static void __init prom_init_mem(void) RELOC(rmo_top) = RELOC(ram_top); RELOC(rmo_top) = min(0x30000000ul, RELOC(rmo_top)); RELOC(alloc_top) = RELOC(rmo_top); + RELOC(alloc_top_high) = RELOC(ram_top); prom_printf("memory layout at init:\n"); - prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit)); prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom)); prom_printf(" alloc_top : %x\n", RELOC(alloc_top)); prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); @@ -1348,16 +1313,10 @@ static void __init prom_initialize_tce_table(void) reserve_mem(local_alloc_bottom, local_alloc_top - local_alloc_bottom); - if (RELOC(prom_memory_limit)) { - /* - * We align the start to a 16MB boundary so we can map - * the TCE area using large pages if possible. - * The end should be the top of RAM so no need to align it. - */ - RELOC(prom_tce_alloc_start) = _ALIGN_DOWN(local_alloc_bottom, - 0x1000000); - RELOC(prom_tce_alloc_end) = local_alloc_top; - } + /* These are only really needed if there is a memory limit in + * effect, but we don't know so export them always. */ + RELOC(prom_tce_alloc_start) = local_alloc_bottom; + RELOC(prom_tce_alloc_end) = local_alloc_top; /* Flag the first invalid entry */ prom_debug("ending prom_initialize_tce_table\n"); @@ -2265,10 +2224,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, /* * Fill in some infos for use by the kernel later on */ - if (RELOC(prom_memory_limit)) - prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit", - &RELOC(prom_memory_limit), - sizeof(prom_memory_limit)); #ifdef CONFIG_PPC64 if (RELOC(ppc64_iommu_off)) prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off", diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 6224624c3d38..59773d9044ba 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -347,9 +347,6 @@ void __init setup_system(void) { DBG(" -> setup_system()\n"); -#ifdef CONFIG_KEXEC - kdump_move_device_tree(); -#endif /* * Unflatten the device-tree passed by prom_init or kexec */ diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c index 417d58518558..8b6f522655a6 100644 --- a/arch/powerpc/mm/lmb.c +++ b/arch/powerpc/mm/lmb.c @@ -89,20 +89,25 @@ static long __init lmb_regions_adjacent(struct lmb_region *rgn, return lmb_addrs_adjacent(base1, size1, base2, size2); } -/* Assumption: base addr of region 1 < base addr of region 2 */ -static void __init lmb_coalesce_regions(struct lmb_region *rgn, - unsigned long r1, unsigned long r2) +static void __init lmb_remove_region(struct lmb_region *rgn, unsigned long r) { unsigned long i; - rgn->region[r1].size += rgn->region[r2].size; - for (i=r2; i < rgn->cnt-1; i++) { - rgn->region[i].base = rgn->region[i+1].base; - rgn->region[i].size = rgn->region[i+1].size; + for (i = r; i < rgn->cnt - 1; i++) { + rgn->region[i].base = rgn->region[i + 1].base; + rgn->region[i].size = rgn->region[i + 1].size; } rgn->cnt--; } +/* Assumption: base addr of region 1 < base addr of region 2 */ +static void __init lmb_coalesce_regions(struct lmb_region *rgn, + unsigned long r1, unsigned long r2) +{ + rgn->region[r1].size += rgn->region[r2].size; + lmb_remove_region(rgn, r2); +} + /* This routine called with relocation disabled. */ void __init lmb_init(void) { @@ -294,17 +299,16 @@ unsigned long __init lmb_end_of_DRAM(void) return (lmb.memory.region[idx].base + lmb.memory.region[idx].size); } -/* - * Truncate the lmb list to memory_limit if it's set - * You must call lmb_analyze() after this. - */ +/* You must call lmb_analyze() after this. */ void __init lmb_enforce_memory_limit(unsigned long memory_limit) { unsigned long i, limit; + struct lmb_property *p; if (! memory_limit) return; + /* Truncate the lmb regions to satisfy the memory limit. */ limit = memory_limit; for (i = 0; i < lmb.memory.cnt; i++) { if (limit > lmb.memory.region[i].size) { @@ -316,4 +320,21 @@ void __init lmb_enforce_memory_limit(unsigned long memory_limit) lmb.memory.cnt = i + 1; break; } + + lmb.rmo_size = lmb.memory.region[0].size; + + /* And truncate any reserves above the limit also. */ + for (i = 0; i < lmb.reserved.cnt; i++) { + p = &lmb.reserved.region[i]; + + if (p->base > memory_limit) + p->size = 0; + else if ((p->base + p->size) > memory_limit) + p->size = memory_limit - p->base; + + if (p->size == 0) { + lmb_remove_region(&lmb.reserved, i); + i--; + } + } } diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 074d1d949708..fd6d0ebe8ddd 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -90,8 +90,6 @@ extern unsigned long embedded_sysmap_end; extern unsigned long iSeries_recal_tb; extern unsigned long iSeries_recal_titan; -static unsigned long cmd_mem_limit; - struct MemoryBlock { unsigned long absStart; unsigned long absEnd; @@ -1026,8 +1024,6 @@ void build_flat_dt(struct iseries_flat_dt *dt, unsigned long phys_mem_size) /* /chosen */ dt_start_node(dt, "chosen"); dt_prop_str(dt, "bootargs", cmd_line); - if (cmd_mem_limit) - dt_prop_u64(dt, "linux,memory-limit", cmd_mem_limit); dt_end_node(dt); dt_cpus(dt); @@ -1053,29 +1049,11 @@ void * __init iSeries_early_setup(void) iSeries_get_cmdline(); - /* Save unparsed command line copy for /proc/cmdline */ - strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); - - /* Parse early parameters, in particular mem=x */ - parse_early_param(); - build_flat_dt(&iseries_dt, phys_mem_size); return (void *) __pa(&iseries_dt); } -/* - * On iSeries we just parse the mem=X option from the command line. - * On pSeries it's a bit more complicated, see prom_init_mem() - */ -static int __init early_parsemem(char *p) -{ - if (p) - cmd_mem_limit = ALIGN(memparse(p, &p), PAGE_SIZE); - return 0; -} -early_param("mem", early_parsemem); - static void hvputc(char c) { if (c == '\n') |