diff options
Diffstat (limited to 'arch')
96 files changed, 1544 insertions, 2010 deletions
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index 1873bd8cd1b2..bc91d6e66bc4 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -16,6 +16,7 @@ #include <linux/mm.h> #include <linux/init.h> +#include <linux/f75375s.h> #include <linux/delay.h> #include <linux/kernel.h> #include <linux/pci.h> @@ -200,11 +201,21 @@ static struct platform_device n2100_serial_device = { .resource = &n2100_uart_resource, }; +static struct f75375s_platform_data n2100_f75375s = { + .pwm = { 255, 255 }, + .pwm_enable = { 0, 0 }, +}; + static struct i2c_board_info __initdata n2100_i2c_devices[] = { { I2C_BOARD_INFO("rtc-rs5c372", 0x32), .type = "rs5c372b", }, + { + I2C_BOARD_INFO("f75375", 0x2e), + .type = "f75375", + .platform_data = &n2100_f75375s, + }, }; /* diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index bbecbd8469b5..4f402c924504 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -19,9 +19,6 @@ config AVR32 There is an AVR32 Linux project with a web page at http://avr32linux.org/. -config UID16 - bool - config GENERIC_GPIO bool default y diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c index a9d9ec081e3d..7c4388f4f17f 100644 --- a/arch/avr32/mach-at32ap/at32ap7000.c +++ b/arch/avr32/mach-at32ap/at32ap7000.c @@ -474,7 +474,7 @@ static struct resource at32ap700x_rtc0_resource[] = { static struct resource at32_wdt0_resource[] = { { .start = 0xfff000b0, - .end = 0xfff000bf, + .end = 0xfff000cf, .flags = IORESOURCE_MEM, }, }; @@ -690,7 +690,7 @@ static struct resource atmel_usart0_resource[] = { IRQ(6), }; DEFINE_DEV_DATA(atmel_usart, 0); -DEV_CLK(usart, atmel_usart0, pba, 4); +DEV_CLK(usart, atmel_usart0, pba, 3); static struct atmel_uart_data atmel_usart1_data = { .use_dma_tx = 1, diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c index 704607fbcc69..fa427ed42787 100644 --- a/arch/avr32/mach-at32ap/hsmc.c +++ b/arch/avr32/mach-at32ap/hsmc.c @@ -7,7 +7,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#define DEBUG #include <linux/clk.h> #include <linux/err.h> #include <linux/init.h> diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c index dd5c009cf224..0b286cd53028 100644 --- a/arch/avr32/mach-at32ap/intc.c +++ b/arch/avr32/mach-at32ap/intc.c @@ -13,6 +13,7 @@ #include <linux/irq.h> #include <linux/platform_device.h> +#include <asm/intc.h> #include <asm/io.h> #include "intc.h" @@ -136,7 +137,8 @@ fail: panic("Interrupt controller initialization failed!\n"); } -unsigned long intc_get_pending(int group) +unsigned long intc_get_pending(unsigned int group) { return intc_readl(&intc0, INTREQ0 + 4 * group); } +EXPORT_SYMBOL_GPL(intc_get_pending); diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 21900a9378bb..222da1501f47 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -13,6 +13,10 @@ config ZONE_DMA bool default y +config NO_DMA + bool + default y + config RWSEM_GENERIC_SPINLOCK bool default y @@ -57,6 +61,10 @@ menu "General setup" source "fs/Kconfig.binfmt" +config GENERIC_HARDIRQS + bool + default y + config ETRAX_CMDLINE string "Kernel command line" default "root=/dev/mtdblock3" @@ -149,7 +157,8 @@ source "net/Kconfig" # bring in ETRAX built-in drivers menu "Drivers for built-in interfaces" -source arch/cris/arch-v10/drivers/Kconfig +# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32) +source arch/cris/arch/drivers/Kconfig endmenu @@ -180,6 +189,10 @@ source "drivers/isdn/Kconfig" source "drivers/telephony/Kconfig" +source "drivers/i2c/Kconfig" + +source "drivers/rtc/Kconfig" + # # input before char - char/joystick depends on it. As does USB. # @@ -194,6 +207,10 @@ source "fs/Kconfig" source "sound/Kconfig" +source "drivers/pcmcia/Kconfig" + +source "drivers/pci/Kconfig" + source "drivers/usb/Kconfig" source "kernel/Kconfig.instrumentation" diff --git a/arch/cris/arch-v10/defconfig b/arch/cris/arch-v10/defconfig index 710c20ba2be7..572f11926399 100644 --- a/arch/cris/arch-v10/defconfig +++ b/arch/cris/arch-v10/defconfig @@ -99,7 +99,6 @@ CONFIG_MTD=y CONFIG_MTD_CFI=y # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_AMDSTD=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_ETRAX_I2C=y @@ -145,7 +144,6 @@ CONFIG_MTD_CFI=y # CONFIG_MTD_CFI_GEOMETRY is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_AMDSTD=y # CONFIG_MTD_SHARP is not set # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_NORA is not set diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index 03e2e68f947d..faf8b4d3ca01 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -2,6 +2,7 @@ config ETRAX_ETHERNET bool "Ethernet support" depends on ETRAX_ARCH_V10 select NET_ETHERNET + select MII help This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet controller. @@ -605,8 +606,6 @@ config ETRAX_AXISFLASHMAP select MTD select MTD_CFI select MTD_CFI_AMDSTD - select MTD_OBSOLETE_CHIPS - select MTD_AMDSTD select MTD_CHAR select MTD_BLOCK select MTD_PARTITIONS diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c index efd7b0f3a910..ea3cf2e39a14 100644 --- a/arch/cris/arch-v10/drivers/axisflashmap.c +++ b/arch/cris/arch-v10/drivers/axisflashmap.c @@ -312,12 +312,12 @@ static struct mtd_info *probe_cs(struct map_info *map_cs) "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n", map_cs->name, map_cs->size, map_cs->map_priv_1); -#ifdef CONFIG_MTD_AMDSTD - mtd_cs = do_map_probe("amd_flash", map_cs); -#endif #ifdef CONFIG_MTD_CFI + mtd_cs = do_map_probe("cfi_probe", map_cs); +#endif +#ifdef CONFIG_MTD_JEDECPROBE if (!mtd_cs) { - mtd_cs = do_map_probe("cfi_probe", map_cs); + mtd_cs = do_map_probe("jedec_probe", map_cs); } #endif diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c index f389ed6998fe..0d347a705835 100644 --- a/arch/cris/arch-v10/drivers/gpio.c +++ b/arch/cris/arch-v10/drivers/gpio.c @@ -297,8 +297,10 @@ gpio_poll(struct file *file, data = *R_PORT_PB_DATA; else if (priv->minor == GPIO_MINOR_G) data = *R_PORT_G_DATA; - else + else { + spin_unlock(&gpio_lock); return 0; + } if ((data & priv->highalarm) || (~data & priv->lowalarm)) { @@ -381,18 +383,21 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count, ssize_t retval = count; if (priv->minor !=GPIO_MINOR_A && priv->minor != GPIO_MINOR_B) { - return -EFAULT; + retval = -EFAULT; + goto out; } if (!access_ok(VERIFY_READ, buf, count)) { - return -EFAULT; + retval = -EFAULT; + goto out; } clk_mask = priv->clk_mask; data_mask = priv->data_mask; /* It must have been configured using the IO_CFG_WRITE_MODE */ /* Perhaps a better error code? */ if (clk_mask == 0 || data_mask == 0) { - return -EPERM; + retval = -EPERM; + goto out; } write_msb = priv->write_msb; D(printk("gpio_write: %lu to data 0x%02X clk 0x%02X msb: %i\n",count, data_mask, clk_mask, write_msb)); @@ -425,6 +430,7 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count, } } } +out: spin_unlock(&gpio_lock); return retval; } @@ -506,6 +512,7 @@ gpio_release(struct inode *inode, struct file *filp) while (p) { if (p->highalarm | p->lowalarm) { gpio_some_alarms = 1; + spin_unlock(&gpio_lock); return 0; } p = p->next; diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S index c5844cb70f09..ec62c951fa3c 100644 --- a/arch/cris/arch-v10/kernel/entry.S +++ b/arch/cris/arch-v10/kernel/entry.S @@ -500,9 +500,8 @@ _work_notifysig: ;; deal with pending signals and notify-resume requests move.d $r9, $r10 ; do_notify_resume syscall/irq param - moveq 0, $r11 ; oldset param - 0 in this case - move.d $sp, $r12 ; the regs param - move.d $r1, $r13 ; the thread_info_flags parameter + move.d $sp, $r11 ; the regs param + move.d $r1, $r12 ; the thread_info_flags parameter jsr do_notify_resume ba _Rexit @@ -678,13 +677,19 @@ IRQ1_interrupt: push $r10 ; push orig_r10 clear.d [$sp=$sp-4] ; frametype == 0, normal frame + ;; If there is a glitch on the NMI pin shorter than ~100ns + ;; (i.e. non-active by the time we get here) then the nmi_pin bit + ;; in R_IRQ_MASK0_RD will already be cleared. The watchdog_nmi bit + ;; is cleared by us however (when feeding the watchdog), which is why + ;; we use that bit to determine what brought us here. + move.d [R_IRQ_MASK0_RD], $r1 ; External NMI or watchdog? - and.d 0x80000000, $r1 - beq wdog + and.d (1<<30), $r1 + bne wdog move.d $sp, $r10 jsr handle_nmi setf m ; Enable NMI again - retb ; Return from NMI + ba _Rexit ; Return the standard way nop wdog: #if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) @@ -775,22 +780,9 @@ multiple_interrupt: push $r10 ; push orig_r10 clear.d [$sp=$sp-4] ; frametype == 0, normal frame - moveq 2, $r2 ; first bit we care about is the timer0 irq - move.d [R_VECT_MASK_RD], $r0; read the irq bits that triggered the multiple irq - move.d $r0, [R_VECT_MASK_CLR] ; Block all active IRQs -1: - btst $r2, $r0 ; check for the irq given by bit r2 - bpl 2f - move.d $r2, $r10 ; First argument to do_IRQ - move.d $sp, $r11 ; second argument to do_IRQ - jsr do_IRQ -2: - addq 1, $r2 ; next vector bit - cmp.b 32, $r2 - bne 1b ; process all irq's up to and including number 31 - moveq 0, $r9 ; make ret_from_intr realise we came from an ir + move.d $sp, $r10 + jsr do_multiple_IRQ - move.d $r0, [R_VECT_MASK_SET] ; Unblock all the IRQs jump ret_from_intr do_sigtrap: @@ -837,6 +829,13 @@ _ugdb_handle_breakpoint: ba do_sigtrap ; SIGTRAP the offending process. pop $dccr ; Restore dccr in delay slot. + .global kernel_execve +kernel_execve: + move.d __NR_execve, $r9 + break 13 + ret + nop + .data hw_bp_trigs: @@ -1135,6 +1134,42 @@ sys_call_table: .long sys_add_key .long sys_request_key .long sys_keyctl + .long sys_ioprio_set + .long sys_ioprio_get /* 290 */ + .long sys_inotify_init + .long sys_inotify_add_watch + .long sys_inotify_rm_watch + .long sys_migrate_pages + .long sys_openat /* 295 */ + .long sys_mkdirat + .long sys_mknodat + .long sys_fchownat + .long sys_futimesat + .long sys_fstatat64 /* 300 */ + .long sys_unlinkat + .long sys_renameat + .long sys_linkat + .long sys_symlinkat + .long sys_readlinkat /* 305 */ + .long sys_fchmodat + .long sys_faccessat + .long sys_pselect6 + .long sys_ppoll + .long sys_unshare /* 310 */ + .long sys_set_robust_list + .long sys_get_robust_list + .long sys_splice + .long sys_sync_file_range + .long sys_tee /* 315 */ + .long sys_vmsplice + .long sys_move_pages + .long sys_getcpu + .long sys_epoll_pwait + .long sys_utimensat /* 320 */ + .long sys_signalfd + .long sys_timerfd + .long sys_eventfd + .long sys_fallocate /* * NOTE!! This doesn't have to be exact - we just have diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c index d3ea052e5ee1..c1a3a2100ee7 100644 --- a/arch/cris/arch-v10/kernel/fasttimer.c +++ b/arch/cris/arch-v10/kernel/fasttimer.c @@ -1,97 +1,9 @@ -/* $Id: fasttimer.c,v 1.9 2005/03/04 08:16:16 starvik Exp $ +/* * linux/arch/cris/kernel/fasttimer.c * * Fast timers for ETRAX100/ETRAX100LX - * This may be useful in other OS than Linux so use 2 space indentation... * - * $Log: fasttimer.c,v $ - * Revision 1.9 2005/03/04 08:16:16 starvik - * Merge of Linux 2.6.11. - * - * Revision 1.8 2005/01/05 06:09:29 starvik - * cli()/sti() will be obsolete in 2.6.11. - * - * Revision 1.7 2005/01/03 13:35:46 starvik - * Removed obsolete stuff. - * Mark fast timer IRQ as not shared. - * - * Revision 1.6 2004/05/14 10:18:39 starvik - * Export fast_timer_list - * - * Revision 1.5 2004/05/14 07:58:01 starvik - * Merge of changes from 2.4 - * - * Revision 1.4 2003/07/04 08:27:41 starvik - * Merge of Linux 2.5.74 - * - * Revision 1.3 2002/12/12 08:26:32 starvik - * Don't use C-comments inside CVS comments - * - * Revision 1.2 2002/12/11 15:42:02 starvik - * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/ - * - * Revision 1.1 2002/11/18 07:58:06 starvik - * Fast timers (from Linux 2.4) - * - * Revision 1.5 2002/10/15 06:21:39 starvik - * Added call to init_waitqueue_head - * - * Revision 1.4 2002/05/28 17:47:59 johana - * Added del_fast_timer() - * - * Revision 1.3 2002/05/28 16:16:07 johana - * Handle empty fast_timer_list - * - * Revision 1.2 2002/05/27 15:38:42 johana - * Made it compile without warnings on Linux 2.4. - * (includes, wait_queue, PROC_FS and snprintf) - * - * Revision 1.1 2002/05/27 15:32:25 johana - * arch/etrax100/kernel/fasttimer.c v1.8 from the elinux tree. - * - * Revision 1.8 2001/11/27 13:50:40 pkj - * Disable interrupts while stopping the timer and while modifying the - * list of active timers in timer1_handler() as it may be interrupted - * by other interrupts (e.g., the serial interrupt) which may add fast - * timers. - * - * Revision 1.7 2001/11/22 11:50:32 pkj - * * Only store information about the last 16 timers. - * * proc_fasttimer_read() now uses an allocated buffer, since it - * requires more space than just a page even for only writing the - * last 16 timers. The buffer is only allocated on request, so - * unless /proc/fasttimer is read, it is never allocated. - * * Renamed fast_timer_started to fast_timers_started to match - * fast_timers_added and fast_timers_expired. - * * Some clean-up. - * - * Revision 1.6 2000/12/13 14:02:08 johana - * Removed volatile for fast_timer_list - * - * Revision 1.5 2000/12/13 13:55:35 johana - * Added DEBUG_LOG, added som cli() and cleanup - * - * Revision 1.4 2000/12/05 13:48:50 johana - * Added range check when writing proc file, modified timer int handling - * - * Revision 1.3 2000/11/23 10:10:20 johana - * More debug/logging possibilities. - * Moved GET_JIFFIES_USEC() to timex.h and time.c - * - * Revision 1.2 2000/11/01 13:41:04 johana - * Clean up and bugfixes. - * Created new do_gettimeofday_fast() that gets a timeval struct - * with time based on jiffies and *R_TIMER0_DATA, uses a table - * for fast conversion of timer value to microseconds. - * (Much faster the standard do_gettimeofday() and we don't really - * want to use the true time - we want the "uptime" so timers don't screw up - * when we change the time. - * TODO: Add efficient support for continuous timers as well. - * - * Revision 1.1 2000/10/26 15:49:16 johana - * Added fasttimer, highresolution timers. - * - * Copyright (C) 2000,2001 2002 Axis Communications AB, Lund, Sweden + * Copyright (C) 2000-2007 Axis Communications AB, Lund, Sweden */ #include <linux/errno.h> @@ -125,7 +37,7 @@ #ifdef FAST_TIMER_SANITY_CHECKS #define SANITYCHECK(x) x -static int sanity_failed = 0; +static int sanity_failed; #else #define SANITYCHECK(x) #endif @@ -134,15 +46,13 @@ static int sanity_failed = 0; #define D2(x) #define DP(x) -#define __INLINE__ inline - -static int fast_timer_running = 0; -static int fast_timers_added = 0; -static int fast_timers_started = 0; -static int fast_timers_expired = 0; -static int fast_timers_deleted = 0; -static int fast_timer_is_init = 0; -static int fast_timer_ints = 0; +static unsigned int fast_timer_running; +static unsigned int fast_timers_added; +static unsigned int fast_timers_started; +static unsigned int fast_timers_expired; +static unsigned int fast_timers_deleted; +static unsigned int fast_timer_is_init; +static unsigned int fast_timer_ints; struct fast_timer *fast_timer_list = NULL; @@ -150,8 +60,8 @@ struct fast_timer *fast_timer_list = NULL; #define DEBUG_LOG_MAX 128 static const char * debug_log_string[DEBUG_LOG_MAX]; static unsigned long debug_log_value[DEBUG_LOG_MAX]; -static int debug_log_cnt = 0; -static int debug_log_cnt_wrapped = 0; +static unsigned int debug_log_cnt; +static unsigned int debug_log_cnt_wrapped; #define DEBUG_LOG(string, value) \ { \ @@ -206,45 +116,29 @@ int timer_freq_settings[NUM_TIMER_STATS]; int timer_delay_settings[NUM_TIMER_STATS]; /* Not true gettimeofday, only checks the jiffies (uptime) + useconds */ -void __INLINE__ do_gettimeofday_fast(struct timeval *tv) +inline void do_gettimeofday_fast(struct fasttime_t *tv) { - unsigned long sec = jiffies; - unsigned long usec = GET_JIFFIES_USEC(); - - usec += (sec % HZ) * (1000000 / HZ); - sec = sec / HZ; - - if (usec > 1000000) - { - usec -= 1000000; - sec++; - } - tv->tv_sec = sec; - tv->tv_usec = usec; + tv->tv_jiff = jiffies; + tv->tv_usec = GET_JIFFIES_USEC(); } -int __INLINE__ timeval_cmp(struct timeval *t0, struct timeval *t1) +inline int fasttime_cmp(struct fasttime_t *t0, struct fasttime_t *t1) { - if (t0->tv_sec < t1->tv_sec) - { - return -1; - } - else if (t0->tv_sec > t1->tv_sec) - { - return 1; - } - if (t0->tv_usec < t1->tv_usec) - { - return -1; - } - else if (t0->tv_usec > t1->tv_usec) - { - return 1; - } - return 0; + /* Compare jiffies. Takes care of wrapping */ + if (time_before(t0->tv_jiff, t1->tv_jiff)) + return -1; + else if (time_after(t0->tv_jiff, t1->tv_jiff)) + return 1; + + /* Compare us */ + if (t0->tv_usec < t1->tv_usec) + return -1; + else if (t0->tv_usec > t1->tv_usec) + return 1; + return 0; } -void __INLINE__ start_timer1(unsigned long delay_us) +inline void start_timer1(unsigned long delay_us) { int freq_index = 0; /* This is the lowest resolution */ unsigned long upper_limit = MAX_DELAY_US; @@ -285,7 +179,7 @@ void __INLINE__ start_timer1(unsigned long delay_us) timer_freq_settings[fast_timers_started % NUM_TIMER_STATS] = freq_index; timer_delay_settings[fast_timers_started % NUM_TIMER_STATS] = delay_us; - D1(printk("start_timer1 : %d us freq: %i div: %i\n", + D1(printk(KERN_DEBUG "start_timer1 : %d us freq: %i div: %i\n", delay_us, freq_index, div)); /* Clear timer1 irq */ *R_IRQ_MASK0_CLR = IO_STATE(R_IRQ_MASK0_CLR, timer1, clr); @@ -340,7 +234,7 @@ void start_one_shot_timer(struct fast_timer *t, printk(KERN_WARNING "timer name: %s data: 0x%08lX already in list!\n", name, data); sanity_failed++; - return; + goto done; } else { @@ -356,11 +250,11 @@ void start_one_shot_timer(struct fast_timer *t, t->name = name; t->tv_expires.tv_usec = t->tv_set.tv_usec + delay_us % 1000000; - t->tv_expires.tv_sec = t->tv_set.tv_sec + delay_us / 1000000; + t->tv_expires.tv_jiff = t->tv_set.tv_jiff + delay_us / 1000000 / HZ; if (t->tv_expires.tv_usec > 1000000) { t->tv_expires.tv_usec -= 1000000; - t->tv_expires.tv_sec++; + t->tv_expires.tv_jiff += HZ; } #ifdef FAST_TIMER_LOG timer_added_log[fast_timers_added % NUM_TIMER_STATS] = *t; @@ -368,7 +262,7 @@ void start_one_shot_timer(struct fast_timer *t, fast_timers_added++; /* Check if this should timeout before anything else */ - if (tmp == NULL || timeval_cmp(&t->tv_expires, &tmp->tv_expires) < 0) + if (tmp == NULL || fasttime_cmp(&t->tv_expires, &tmp->tv_expires) < 0) { /* Put first in list and modify the timer value */ t->prev = NULL; @@ -384,8 +278,8 @@ void start_one_shot_timer(struct fast_timer *t, start_timer1(delay_us); } else { /* Put in correct place in list */ - while (tmp->next && - timeval_cmp(&t->tv_expires, &tmp->next->tv_expires) > 0) + while (tmp->next && fasttime_cmp(&t->tv_expires, + &tmp->next->tv_expires) > 0) { tmp = tmp->next; } @@ -401,6 +295,7 @@ void start_one_shot_timer(struct fast_timer *t, D2(printk("start_one_shot_timer: %d us done\n", delay_us)); +done: local_irq_restore(flags); } /* start_one_shot_timer */ @@ -444,11 +339,18 @@ int del_fast_timer(struct fast_timer * t) /* Timer 1 interrupt handler */ static irqreturn_t -timer1_handler(int irq, void *dev_id, struct pt_regs *regs) +timer1_handler(int irq, void *dev_id) { struct fast_timer *t; unsigned long flags; + /* We keep interrupts disabled not only when we modify the + * fast timer list, but any time we hold a reference to a + * timer in the list, since del_fast_timer may be called + * from (another) interrupt context. Thus, the only time + * when interrupts are enabled is when calling the timer + * callback function. + */ local_irq_save(flags); /* Clear timer1 irq */ @@ -466,18 +368,19 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs) fast_timer_running = 0; fast_timer_ints++; - local_irq_restore(flags); - t = fast_timer_list; while (t) { - struct timeval tv; + struct fasttime_t tv; + fast_timer_function_type *f; + unsigned long d; /* Has it really expired? */ do_gettimeofday_fast(&tv); - D1(printk("t: %is %06ius\n", tv.tv_sec, tv.tv_usec)); + D1(printk(KERN_DEBUG "t: %is %06ius\n", + tv.tv_jiff, tv.tv_usec)); - if (timeval_cmp(&t->tv_expires, &tv) <= 0) + if (fasttime_cmp(&t->tv_expires, &tv) <= 0) { /* Yes it has expired */ #ifdef FAST_TIMER_LOG @@ -486,7 +389,6 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs) fast_timers_expired++; /* Remove this timer before call, since it may reuse the timer */ - local_irq_save(flags); if (t->prev) { t->prev->next = t->next; @@ -501,16 +403,23 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs) } t->prev = NULL; t->next = NULL; - local_irq_restore(flags); - if (t->function != NULL) - { - t->function(t->data); - } - else - { + /* Save function callback data before enabling + * interrupts, since the timer may be removed and + * we don't know how it was allocated + * (e.g. ->function and ->data may become overwritten + * after deletion if the timer was stack-allocated). + */ + f = t->function; + d = t->data; + + if (f != NULL) { + /* Run callback with interrupts enabled. */ + local_irq_restore(flags); + f(d); + local_irq_save(flags); + } else DEBUG_LOG("!timer1 %i function==NULL!\n", fast_timer_ints); - } } else { @@ -518,16 +427,20 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs) D1(printk(".\n")); } - local_irq_save(flags); if ((t = fast_timer_list) != NULL) { /* Start next timer.. */ - long us; - struct timeval tv; + long us = 0; + struct fasttime_t tv; do_gettimeofday_fast(&tv); - us = ((t->tv_expires.tv_sec - tv.tv_sec) * 1000000 + - t->tv_expires.tv_usec - tv.tv_usec); + + /* time_after_eq takes care of wrapping */ + if (time_after_eq(t->tv_expires.tv_jiff, tv.tv_jiff)) + us = ((t->tv_expires.tv_jiff - tv.tv_jiff) * + 1000000 / HZ + t->tv_expires.tv_usec - + tv.tv_usec); + if (us > 0) { if (!fast_timer_running) @@ -537,7 +450,6 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs) #endif start_timer1(us); } - local_irq_restore(flags); break; } else @@ -548,9 +460,10 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs) D1(printk("e! %d\n", us)); } } - local_irq_restore(flags); } + local_irq_restore(flags); + if (!t) { D1(printk("t1 stop!\n")); @@ -575,28 +488,17 @@ static void wake_up_func(unsigned long data) void schedule_usleep(unsigned long us) { struct fast_timer t; -#ifdef DECLARE_WAITQUEUE wait_queue_head_t sleep_wait; init_waitqueue_head(&sleep_wait); - { - DECLARE_WAITQUEUE(wait, current); -#else - struct wait_queue *sleep_wait = NULL; - struct wait_queue wait = { current, NULL }; -#endif D1(printk("schedule_usleep(%d)\n", us)); - add_wait_queue(&sleep_wait, &wait); - set_current_state(TASK_INTERRUPTIBLE); start_one_shot_timer(&t, wake_up_func, (unsigned long)&sleep_wait, us, "usleep"); - schedule(); - set_current_state(TASK_RUNNING); - remove_wait_queue(&sleep_wait, &wait); + /* Uninterruptible sleep on the fast timer. (The condition is somewhat + * redundant since the timer is what wakes us up.) */ + wait_event(sleep_wait, !fast_timer_pending(&t)); + D1(printk("done schedule_usleep(%d)\n", us)); -#ifdef DECLARE_WAITQUEUE - } -#endif } #ifdef CONFIG_PROC_FS @@ -616,7 +518,7 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len unsigned long flags; int i = 0; int num_to_show; - struct timeval tv; + struct fasttime_t tv; struct fast_timer *t, *nextt; static char *bigbuf = NULL; static unsigned long used; @@ -624,7 +526,8 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len if (!bigbuf && !(bigbuf = vmalloc(BIG_BUF_SIZE))) { used = 0; - bigbuf[0] = '\0'; + if (buf) + buf[0] = '\0'; return 0; } @@ -646,7 +549,7 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len used += sprintf(bigbuf + used, "Fast timer running: %s\n", fast_timer_running ? "yes" : "no"); used += sprintf(bigbuf + used, "Current time: %lu.%06lu\n", - (unsigned long)tv.tv_sec, + (unsigned long)tv.tv_jiff, (unsigned long)tv.tv_usec); #ifdef FAST_TIMER_SANITY_CHECKS used += sprintf(bigbuf + used, "Sanity failed: %i\n", @@ -696,9 +599,9 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len "d: %6li us data: 0x%08lX" "\n", t->name, - (unsigned long)t->tv_set.tv_sec, + (unsigned long)t->tv_set.tv_jiff, (unsigned long)t->tv_set.tv_usec, - (unsigned long)t->tv_expires.tv_sec, + (unsigned long)t->tv_expires.tv_jiff, (unsigned long)t->tv_expires.tv_usec, t->delay_us, t->data @@ -718,9 +621,9 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len "d: %6li us data: 0x%08lX" "\n", t->name, - (unsigned long)t->tv_set.tv_sec, + (unsigned long)t->tv_set.tv_jiff, (unsigned long)t->tv_set.tv_usec, - (unsigned long)t->tv_expires.tv_sec, + (unsigned long)t->tv_expires.tv_jiff, (unsigned long)t->tv_expires.tv_usec, t->delay_us, t->data @@ -738,9 +641,9 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len "d: %6li us data: 0x%08lX" "\n", t->name, - (unsigned long)t->tv_set.tv_sec, + (unsigned long)t->tv_set.tv_jiff, (unsigned long)t->tv_set.tv_usec, - (unsigned long)t->tv_expires.tv_sec, + (unsigned long)t->tv_expires.tv_jiff, (unsigned long)t->tv_expires.tv_usec, t->delay_us, t->data @@ -761,15 +664,15 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len /* " func: 0x%08lX" */ "\n", t->name, - (unsigned long)t->tv_set.tv_sec, + (unsigned long)t->tv_set.tv_jiff, (unsigned long)t->tv_set.tv_usec, - (unsigned long)t->tv_expires.tv_sec, + (unsigned long)t->tv_expires.tv_jiff, (unsigned long)t->tv_expires.tv_usec, t->delay_us, t->data /* , t->function */ ); - local_irq_disable(); + local_irq_save(flags); if (t->next != nextt) { printk(KERN_WARNING "timer removed!\n"); @@ -798,7 +701,7 @@ static volatile int num_test_timeout = 0; static struct fast_timer tr[10]; static int exp_num[10]; -static struct timeval tv_exp[100]; +static struct fasttime_t tv_exp[100]; static void test_timeout(unsigned long data) { @@ -836,7 +739,7 @@ static void fast_timer_test(void) int prev_num; int j; - struct timeval tv, tv0, tv1, tv2; + struct fasttime_t tv, tv0, tv1, tv2; printk("fast_timer_test() start\n"); do_gettimeofday_fast(&tv); @@ -849,7 +752,8 @@ static void fast_timer_test(void) { do_gettimeofday_fast(&tv_exp[j]); } - printk("fast_timer_test() %is %06i\n", tv.tv_sec, tv.tv_usec); + printk(KERN_DEBUG "fast_timer_test() %is %06i\n", + tv.tv_jiff, tv.tv_usec); for (j = 0; j < 1000; j++) { @@ -858,12 +762,12 @@ static void fast_timer_test(void) } for (j = 0; j < 100; j++) { - printk("%i.%i %i.%i %i.%i %i.%i %i.%i\n", - tv_exp[j].tv_sec,tv_exp[j].tv_usec, - tv_exp[j+1].tv_sec,tv_exp[j+1].tv_usec, - tv_exp[j+2].tv_sec,tv_exp[j+2].tv_usec, - tv_exp[j+3].tv_sec,tv_exp[j+3].tv_usec, - tv_exp[j+4].tv_sec,tv_exp[j+4].tv_usec); + printk(KERN_DEBUG "%i.%i %i.%i %i.%i %i.%i %i.%i\n", + tv_exp[j].tv_jiff, tv_exp[j].tv_usec, + tv_exp[j+1].tv_jiff, tv_exp[j+1].tv_usec, + tv_exp[j+2].tv_jiff, tv_exp[j+2].tv_usec, + tv_exp[j+3].tv_jiff, tv_exp[j+3].tv_usec, + tv_exp[j+4].tv_jiff, tv_exp[j+4].tv_usec); j += 4; } do_gettimeofday_fast(&tv0); @@ -895,9 +799,12 @@ static void fast_timer_test(void) } } do_gettimeofday_fast(&tv2); - printk("Timers started %is %06i\n", tv0.tv_sec, tv0.tv_usec); - printk("Timers started at %is %06i\n", tv1.tv_sec, tv1.tv_usec); - printk("Timers done %is %06i\n", tv2.tv_sec, tv2.tv_usec); + printk(KERN_DEBUG "Timers started %is %06i\n", + tv0.tv_jiff, tv0.tv_usec); + printk(KERN_DEBUG "Timers started at %is %06i\n", + tv1.tv_jiff, tv1.tv_usec); + printk(KERN_DEBUG "Timers done %is %06i\n", + tv2.tv_jiff, tv2.tv_usec); DP(printk("buf0:\n"); printk(buf0); printk("buf1:\n"); @@ -919,9 +826,9 @@ static void fast_timer_test(void) printk("%-10s set: %6is %06ius exp: %6is %06ius " "data: 0x%08X func: 0x%08X\n", t->name, - t->tv_set.tv_sec, + t->tv_set.tv_jiff, t->tv_set.tv_usec, - t->tv_expires.tv_sec, + t->tv_expires.tv_jiff, t->tv_expires.tv_usec, t->data, t->function @@ -929,10 +836,12 @@ static void fast_timer_test(void) printk(" del: %6ius did exp: %6is %06ius as #%i error: %6li\n", t->delay_us, - tv_exp[j].tv_sec, + tv_exp[j].tv_jiff, tv_exp[j].tv_usec, exp_num[j], - (tv_exp[j].tv_sec - t->tv_expires.tv_sec)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec); + (tv_exp[j].tv_jiff - t->tv_expires.tv_jiff) * + 1000000 + tv_exp[j].tv_usec - + t->tv_expires.tv_usec); } proc_fasttimer_read(buf5, NULL, 0, 0, 0); printk("buf5 after all done:\n"); @@ -942,7 +851,7 @@ static void fast_timer_test(void) #endif -void fast_timer_init(void) +int fast_timer_init(void) { /* For some reason, request_irq() hangs when called froom time_init() */ if (!fast_timer_is_init) @@ -975,4 +884,6 @@ void fast_timer_init(void) fast_timer_test(); #endif } + return 0; } +__initcall(fast_timer_init); diff --git a/arch/cris/arch-v10/kernel/io_interface_mux.c b/arch/cris/arch-v10/kernel/io_interface_mux.c index 29d48ad00df9..3a9114e89edf 100644 --- a/arch/cris/arch-v10/kernel/io_interface_mux.c +++ b/arch/cris/arch-v10/kernel/io_interface_mux.c @@ -304,7 +304,7 @@ static unsigned char clear_group_from_set(const unsigned char groups, struct if_ static struct if_group *get_group(const unsigned char groups) { int i; - for (i = 0; i < sizeof(if_groups)/sizeof(struct if_group); i++) { + for (i = 0; i < ARRAY_SIZE(if_groups); i++) { if (groups & if_groups[i].group) { return &if_groups[i]; } diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c index 845c95f6e871..e06ab0050d37 100644 --- a/arch/cris/arch-v10/kernel/irq.c +++ b/arch/cris/arch-v10/kernel/irq.c @@ -12,10 +12,16 @@ */ #include <asm/irq.h> +#include <asm/current.h> #include <linux/irq.h> +#include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/init.h> +/* From kgdb.c. */ +extern void kgdb_init(void); +extern void breakpoint(void); + #define mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr)); #define unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr)); @@ -75,8 +81,8 @@ BUILD_IRQ(12, 0x1000) BUILD_IRQ(13, 0x2000) void mmu_bus_fault(void); /* IRQ 14 is the bus fault interrupt */ void multiple_interrupt(void); /* IRQ 15 is the multiple IRQ interrupt */ -BUILD_IRQ(16, 0x10000) -BUILD_IRQ(17, 0x20000) +BUILD_IRQ(16, 0x10000 | 0x20000) /* ethernet tx interrupt needs to block rx */ +BUILD_IRQ(17, 0x20000 | 0x10000) /* ...and vice versa */ BUILD_IRQ(18, 0x40000) BUILD_IRQ(19, 0x80000) BUILD_IRQ(20, 0x100000) @@ -147,6 +153,55 @@ void system_call(void); /* from entry.S */ void do_sigtrap(void); /* from entry.S */ void gdb_handle_breakpoint(void); /* from entry.S */ +extern void do_IRQ(int irq, struct pt_regs * regs); + +/* Handle multiple IRQs */ +void do_multiple_IRQ(struct pt_regs* regs) +{ + int bit; + unsigned masked; + unsigned mask; + unsigned ethmask = 0; + + /* Get interrupts to mask and handle */ + mask = masked = *R_VECT_MASK_RD; + + /* Never mask timer IRQ */ + mask &= ~(IO_MASK(R_VECT_MASK_RD, timer0)); + + /* + * If either ethernet interrupt (rx or tx) is active then block + * the other one too. Unblock afterwards also. + */ + if (mask & + (IO_STATE(R_VECT_MASK_RD, dma0, active) | + IO_STATE(R_VECT_MASK_RD, dma1, active))) { + ethmask = (IO_MASK(R_VECT_MASK_RD, dma0) | + IO_MASK(R_VECT_MASK_RD, dma1)); + } + + /* Block them */ + *R_VECT_MASK_CLR = (mask | ethmask); + + /* An extra irq_enter here to prevent softIRQs to run after + * each do_IRQ. This will decrease the interrupt latency. + */ + irq_enter(); + + /* Handle all IRQs */ + for (bit = 2; bit < 32; bit++) { + if (masked & (1 << bit)) { + do_IRQ(bit, regs); + } + } + + /* This irq_exit() will trigger the soft IRQs. */ + irq_exit(); + + /* Unblock the IRQs again */ + *R_VECT_MASK_SET = (masked | ethmask); +} + /* init_IRQ() is called by start_kernel and is responsible for fixing IRQ masks and setting the irq vector table. */ diff --git a/arch/cris/arch-v10/kernel/setup.c b/arch/cris/arch-v10/kernel/setup.c index 682ef955aec4..de27b50b72a2 100644 --- a/arch/cris/arch-v10/kernel/setup.c +++ b/arch/cris/arch-v10/kernel/setup.c @@ -13,6 +13,7 @@ #include <linux/seq_file.h> #include <linux/proc_fs.h> #include <linux/delay.h> +#include <linux/param.h> #ifdef CONFIG_PROC_FS #define HAS_FPU 0x0001 @@ -56,8 +57,8 @@ int show_cpuinfo(struct seq_file *m, void *v) revision = rdvr(); - if (revision >= sizeof cpu_info/sizeof *cpu_info) - info = &cpu_info[sizeof cpu_info/sizeof *cpu_info - 1]; + if (revision >= ARRAY_SIZE(cpu_info)) + info = &cpu_info[ARRAY_SIZE(cpu_info) - 1]; else info = &cpu_info[revision]; diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c index 575a14bb1106..5976f6199c47 100644 --- a/arch/cris/arch-v10/kernel/time.c +++ b/arch/cris/arch-v10/kernel/time.c @@ -1,5 +1,4 @@ -/* $Id: time.c,v 1.5 2004/09/29 06:12:46 starvik Exp $ - * +/* * linux/arch/cris/arch-v10/kernel/time.c * * Copyright (C) 1991, 1992, 1995 Linus Torvalds @@ -20,6 +19,7 @@ #include <asm/io.h> #include <asm/delay.h> #include <asm/rtc.h> +#include <asm/irq_regs.h> /* define this if you need to use print_timestamp */ /* it will make jiffies at 96 hz instead of 100 hz though */ @@ -201,8 +201,9 @@ static long last_rtc_update = 0; extern void cris_do_profile(struct pt_regs *regs); static inline irqreturn_t -timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +timer_interrupt(int irq, void *dev_id) { + struct pt_regs *regs = get_irq_regs(); /* acknowledge the timer irq */ #ifdef USE_CASCADE_TIMERS @@ -221,9 +222,11 @@ timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) #endif /* reset watchdog otherwise it resets us! */ - reset_watchdog(); + /* Update statistics. */ + update_process_times(user_mode(regs)); + /* call the real timer interrupt handler */ do_timer(1); diff --git a/arch/cris/arch-v10/lib/memset.c b/arch/cris/arch-v10/lib/memset.c index 82bb66839171..42c1101043a3 100644 --- a/arch/cris/arch-v10/lib/memset.c +++ b/arch/cris/arch-v10/lib/memset.c @@ -66,7 +66,7 @@ void *memset(void *pdst, { register char *dst __asm__ ("r13") = pdst; - + /* This is NONPORTABLE, but since this whole routine is */ /* grossly nonportable that doesn't matter. */ @@ -110,52 +110,52 @@ void *memset(void *pdst, If you want to check that the allocation was right; then check the equalities in the first comment. It should say "r13=r13, r12=r12, r11=r11" */ - __asm__ volatile (" - ;; Check that the following is true (same register names on - ;; both sides of equal sign, as in r8=r8): - ;; %0=r13, %1=r12, %4=r11 - ;; - ;; Save the registers we'll clobber in the movem process - ;; on the stack. Don't mention them to gcc, it will only be - ;; upset. - subq 11*4,$sp - movem $r10,[$sp] - - move.d $r11,$r0 - move.d $r11,$r1 - move.d $r11,$r2 - move.d $r11,$r3 - move.d $r11,$r4 - move.d $r11,$r5 - move.d $r11,$r6 - move.d $r11,$r7 - move.d $r11,$r8 - move.d $r11,$r9 - move.d $r11,$r10 - - ;; Now we've got this: - ;; r13 - dst - ;; r12 - n - - ;; Update n for the first loop - subq 12*4,$r12 -0: - subq 12*4,$r12 - bge 0b - movem $r11,[$r13+] - - addq 12*4,$r12 ;; compensate for last loop underflowing n - - ;; Restore registers from stack - movem [$sp+],$r10" + __asm__ volatile ("\n\ + ;; Check that the following is true (same register names on \n\ + ;; both sides of equal sign, as in r8=r8): \n\ + ;; %0=r13, %1=r12, %4=r11 \n\ + ;; \n\ + ;; Save the registers we'll clobber in the movem process \n\ + ;; on the stack. Don't mention them to gcc, it will only be \n\ + ;; upset. \n\ + subq 11*4,$sp \n\ + movem $r10,[$sp] \n\ + \n\ + move.d $r11,$r0 \n\ + move.d $r11,$r1 \n\ + move.d $r11,$r2 \n\ + move.d $r11,$r3 \n\ + move.d $r11,$r4 \n\ + move.d $r11,$r5 \n\ + move.d $r11,$r6 \n\ + move.d $r11,$r7 \n\ + move.d $r11,$r8 \n\ + move.d $r11,$r9 \n\ + move.d $r11,$r10 \n\ + \n\ + ;; Now we've got this: \n\ + ;; r13 - dst \n\ + ;; r12 - n \n\ + \n\ + ;; Update n for the first loop \n\ + subq 12*4,$r12 \n\ +0: \n\ + subq 12*4,$r12 \n\ + bge 0b \n\ + movem $r11,[$r13+] \n\ + \n\ + addq 12*4,$r12 ;; compensate for last loop underflowing n \n\ + \n\ + ;; Restore registers from stack \n\ + movem [$sp+],$r10" /* Outputs */ : "=r" (dst), "=r" (n) /* Inputs */ : "0" (dst), "1" (n), "r" (lc)); - + } /* Either we directly starts copying, using dword copying - in a loop, or we copy as much as possible with 'movem' + in a loop, or we copy as much as possible with 'movem' and then the last block (<44 bytes) is copied here. This will work since 'movem' will have updated src,dst,n. */ diff --git a/arch/cris/arch-v10/lib/string.c b/arch/cris/arch-v10/lib/string.c index 15d6662b03b1..7161a2bef4fe 100644 --- a/arch/cris/arch-v10/lib/string.c +++ b/arch/cris/arch-v10/lib/string.c @@ -95,33 +95,33 @@ void *memcpy(void *pdst, If you want to check that the allocation was right; then check the equalities in the first comment. It should say "r13=r13, r11=r11, r12=r12" */ - __asm__ volatile (" - ;; Check that the following is true (same register names on - ;; both sides of equal sign, as in r8=r8): - ;; %0=r13, %1=r11, %2=r12 - ;; - ;; Save the registers we'll use in the movem process - ;; on the stack. - subq 11*4,$sp - movem $r10,[$sp] - - ;; Now we've got this: - ;; r11 - src - ;; r13 - dst - ;; r12 - n - - ;; Update n for the first loop - subq 44,$r12 -0: - movem [$r11+],$r10 - subq 44,$r12 - bge 0b - movem $r10,[$r13+] - - addq 44,$r12 ;; compensate for last loop underflowing n - - ;; Restore registers from stack - movem [$sp+],$r10" + __asm__ volatile ("\n\ + ;; Check that the following is true (same register names on \n\ + ;; both sides of equal sign, as in r8=r8): \n\ + ;; %0=r13, %1=r11, %2=r12 \n\ + ;; \n\ + ;; Save the registers we'll use in the movem process \n\ + ;; on the stack. \n\ + subq 11*4,$sp \n\ + movem $r10,[$sp] \n\ + \n\ + ;; Now we've got this: \n\ + ;; r11 - src \n\ + ;; r13 - dst \n\ + ;; r12 - n \n\ + \n\ + ;; Update n for the first loop \n\ + subq 44,$r12 \n\ +0: \n\ + movem [$r11+],$r10 \n\ + subq 44,$r12 \n\ + bge 0b \n\ + movem $r10,[$r13+] \n\ + \n\ + addq 44,$r12 ;; compensate for last loop underflowing n \n\ + \n\ + ;; Restore registers from stack \n\ + movem [$sp+],$r10" /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n) /* Inputs */ : "0" (dst), "1" (src), "2" (n)); diff --git a/arch/cris/arch-v10/lib/usercopy.c b/arch/cris/arch-v10/lib/usercopy.c index a12c708afc9a..b8e6c0430e5b 100644 --- a/arch/cris/arch-v10/lib/usercopy.c +++ b/arch/cris/arch-v10/lib/usercopy.c @@ -92,58 +92,58 @@ __copy_user (void __user *pdst, const void *psrc, unsigned long pn) .ifnc %0%1%2%3,$r13$r11$r12$r10 \n\ .err \n\ .endif \n\ - - ;; Save the registers we'll use in the movem process - ;; on the stack. - subq 11*4,$sp - movem $r10,[$sp] - - ;; Now we've got this: - ;; r11 - src - ;; r13 - dst - ;; r12 - n - - ;; Update n for the first loop - subq 44,$r12 - -; Since the noted PC of a faulting instruction in a delay-slot of a taken -; branch, is that of the branch target, we actually point at the from-movem -; for this case. There is no ambiguity here; if there was a fault in that -; instruction (meaning a kernel oops), the faulted PC would be the address -; after *that* movem. - -0: - movem [$r11+],$r10 - subq 44,$r12 - bge 0b - movem $r10,[$r13+] -1: - addq 44,$r12 ;; compensate for last loop underflowing n - - ;; Restore registers from stack - movem [$sp+],$r10 -2: - .section .fixup,\"ax\" - -; To provide a correct count in r10 of bytes that failed to be copied, -; we jump back into the loop if the loop-branch was taken. There is no -; performance penalty for sany use; the program will segfault soon enough. - -3: - move.d [$sp],$r10 - addq 44,$r10 - move.d $r10,[$sp] - jump 0b -4: - movem [$sp+],$r10 - addq 44,$r10 - addq 44,$r12 - jump 2b - - .previous - .section __ex_table,\"a\" - .dword 0b,3b - .dword 1b,4b + \n\ + ;; Save the registers we'll use in the movem process \n\ + ;; on the stack. \n\ + subq 11*4,$sp \n\ + movem $r10,[$sp] \n\ + \n\ + ;; Now we've got this: \n\ + ;; r11 - src \n\ + ;; r13 - dst \n\ + ;; r12 - n \n\ + \n\ + ;; Update n for the first loop \n\ + subq 44,$r12 \n\ + \n\ +; Since the noted PC of a faulting instruction in a delay-slot of a taken \n\ +; branch, is that of the branch target, we actually point at the from-movem \n\ +; for this case. There is no ambiguity here; if there was a fault in that \n\ +; instruction (meaning a kernel oops), the faulted PC would be the address \n\ +; after *that* movem. \n\ + \n\ +0: \n\ + movem [$r11+],$r10 \n\ + subq 44,$r12 \n\ + bge 0b \n\ + movem $r10,[$r13+] \n\ +1: \n\ + addq 44,$r12 ;; compensate for last loop underflowing n \n\ + \n\ + ;; Restore registers from stack \n\ + movem [$sp+],$r10 \n\ +2: \n\ + .section .fixup,\"ax\" \n\ + \n\ +; To provide a correct count in r10 of bytes that failed to be copied, \n\ +; we jump back into the loop if the loop-branch was taken. There is no \n\ +; performance penalty for sany use; the program will segfault soon enough.\n\ + \n\ +3: \n\ + move.d [$sp],$r10 \n\ + addq 44,$r10 \n\ + move.d $r10,[$sp] \n\ + jump 0b \n\ +4: \n\ + movem [$sp+],$r10 \n\ + addq 44,$r10 \n\ + addq 44,$r12 \n\ + jump 2b \n\ + \n\ + .previous \n\ + .section __ex_table,\"a\" \n\ + .dword 0b,3b \n\ + .dword 1b,4b \n\ .previous" /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn) @@ -253,59 +253,59 @@ __copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn) If you want to check that the allocation was right; then check the equalities in the first comment. It should say "r13=r13, r11=r11, r12=r12" */ - __asm__ volatile (" + __asm__ volatile ("\n\ .ifnc %0%1%2%3,$r13$r11$r12$r10 \n\ .err \n\ .endif \n\ - - ;; Save the registers we'll use in the movem process - ;; on the stack. - subq 11*4,$sp - movem $r10,[$sp] - - ;; Now we've got this: - ;; r11 - src - ;; r13 - dst - ;; r12 - n - - ;; Update n for the first loop - subq 44,$r12 -0: - movem [$r11+],$r10 -1: - subq 44,$r12 - bge 0b - movem $r10,[$r13+] - - addq 44,$r12 ;; compensate for last loop underflowing n - - ;; Restore registers from stack - movem [$sp+],$r10 -4: - .section .fixup,\"ax\" - -;; Do not jump back into the loop if we fail. For some uses, we get a -;; page fault somewhere on the line. Without checking for page limits, -;; we don't know where, but we need to copy accurately and keep an -;; accurate count; not just clear the whole line. To do that, we fall -;; down in the code below, proceeding with smaller amounts. It should -;; be kept in mind that we have to cater to code like what at one time -;; was in fs/super.c: -;; i = size - copy_from_user((void *)page, data, size); -;; which would cause repeated faults while clearing the remainder of -;; the SIZE bytes at PAGE after the first fault. -;; A caveat here is that we must not fall through from a failing page -;; to a valid page. - -3: - movem [$sp+],$r10 - addq 44,$r12 ;; Get back count before faulting point. - subq 44,$r11 ;; Get back pointer to faulting movem-line. - jump 4b ;; Fall through, pretending the fault didn't happen. - - .previous - .section __ex_table,\"a\" - .dword 1b,3b + \n\ + ;; Save the registers we'll use in the movem process \n\ + ;; on the stack. \n\ + subq 11*4,$sp \n\ + movem $r10,[$sp] \n\ + \n\ + ;; Now we've got this: \n\ + ;; r11 - src \n\ + ;; r13 - dst \n\ + ;; r12 - n \n\ + \n\ + ;; Update n for the first loop \n\ + subq 44,$r12 \n\ +0: \n\ + movem [$r11+],$r10 \n\ +1: \n\ + subq 44,$r12 \n\ + bge 0b \n\ + movem $r10,[$r13+] \n\ + \n\ + addq 44,$r12 ;; compensate for last loop underflowing n \n\ + \n\ + ;; Restore registers from stack \n\ + movem [$sp+],$r10 \n\ +4: \n\ + .section .fixup,\"ax\" \n\ + \n\ +;; Do not jump back into the loop if we fail. For some uses, we get a \n\ +;; page fault somewhere on the line. Without checking for page limits, \n\ +;; we don't know where, but we need to copy accurately and keep an \n\ +;; accurate count; not just clear the whole line. To do that, we fall \n\ +;; down in the code below, proceeding with smaller amounts. It should \n\ +;; be kept in mind that we have to cater to code like what at one time \n\ +;; was in fs/super.c: \n\ +;; i = size - copy_from_user((void *)page, data, size); \n\ +;; which would cause repeated faults while clearing the remainder of \n\ +;; the SIZE bytes at PAGE after the first fault. \n\ +;; A caveat here is that we must not fall through from a failing page \n\ +;; to a valid page. \n\ + \n\ +3: \n\ + movem [$sp+],$r10 \n\ + addq 44,$r12 ;; Get back count before faulting point. \n\ + subq 44,$r11 ;; Get back pointer to faulting movem-line. \n\ + jump 4b ;; Fall through, pretending the fault didn't happen.\n\ + \n\ + .previous \n\ + .section __ex_table,\"a\" \n\ + .dword 1b,3b \n\ .previous" /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn) @@ -425,64 +425,64 @@ __do_clear_user (void __user *pto, unsigned long pn) If you want to check that the allocation was right; then check the equalities in the first comment. It should say something like "r13=r13, r11=r11, r12=r12". */ - __asm__ volatile (" + __asm__ volatile ("\n\ .ifnc %0%1%2,$r13$r12$r10 \n\ .err \n\ .endif \n\ - - ;; Save the registers we'll clobber in the movem process - ;; on the stack. Don't mention them to gcc, it will only be - ;; upset. - subq 11*4,$sp - movem $r10,[$sp] - - clear.d $r0 - clear.d $r1 - clear.d $r2 - clear.d $r3 - clear.d $r4 - clear.d $r5 - clear.d $r6 - clear.d $r7 - clear.d $r8 - clear.d $r9 - clear.d $r10 - clear.d $r11 - - ;; Now we've got this: - ;; r13 - dst - ;; r12 - n - - ;; Update n for the first loop - subq 12*4,$r12 -0: - subq 12*4,$r12 - bge 0b - movem $r11,[$r13+] -1: - addq 12*4,$r12 ;; compensate for last loop underflowing n - - ;; Restore registers from stack - movem [$sp+],$r10 -2: - .section .fixup,\"ax\" -3: - move.d [$sp],$r10 - addq 12*4,$r10 - move.d $r10,[$sp] - clear.d $r10 - jump 0b - -4: - movem [$sp+],$r10 - addq 12*4,$r10 - addq 12*4,$r12 - jump 2b - - .previous - .section __ex_table,\"a\" - .dword 0b,3b - .dword 1b,4b + \n\ + ;; Save the registers we'll clobber in the movem process \n\ + ;; on the stack. Don't mention them to gcc, it will only be \n\ + ;; upset. \n\ + subq 11*4,$sp \n\ + movem $r10,[$sp] \n\ + \n\ + clear.d $r0 \n\ + clear.d $r1 \n\ + clear.d $r2 \n\ + clear.d $r3 \n\ + clear.d $r4 \n\ + clear.d $r5 \n\ + clear.d $r6 \n\ + clear.d $r7 \n\ + clear.d $r8 \n\ + clear.d $r9 \n\ + clear.d $r10 \n\ + clear.d $r11 \n\ + \n\ + ;; Now we've got this: \n\ + ;; r13 - dst \n\ + ;; r12 - n \n\ + \n\ + ;; Update n for the first loop \n\ + subq 12*4,$r12 \n\ +0: \n\ + subq 12*4,$r12 \n\ + bge 0b \n\ + movem $r11,[$r13+] \n\ +1: \n\ + addq 12*4,$r12 ;; compensate for last loop underflowing n\n\ + \n\ + ;; Restore registers from stack \n\ + movem [$sp+],$r10 \n\ +2: \n\ + .section .fixup,\"ax\" \n\ +3: \n\ + move.d [$sp],$r10 \n\ + addq 12*4,$r10 \n\ + move.d $r10,[$sp] \n\ + clear.d $r10 \n\ + jump 0b \n\ + \n\ +4: \n\ + movem [$sp+],$r10 \n\ + addq 12*4,$r10 \n\ + addq 12*4,$r12 \n\ + jump 2b \n\ + \n\ + .previous \n\ + .section __ex_table,\"a\" \n\ + .dword 0b,3b \n\ + .dword 1b,4b \n\ .previous" /* Outputs */ : "=r" (dst), "=r" (n), "=r" (retn) diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index cc6ba5423754..7f72d7c9e1ce 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -362,8 +362,6 @@ config ETRAX_AXISFLASHMAP select MTD select MTD_CFI select MTD_CFI_AMDSTD - select MTD_OBSOLETE_CHIPS - select MTD_AMDSTD select MTD_CHAR select MTD_BLOCK select MTD_PARTITIONS diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c index 3ec12ea44e8e..c5ff95e18269 100644 --- a/arch/cris/arch-v32/drivers/axisflashmap.c +++ b/arch/cris/arch-v32/drivers/axisflashmap.c @@ -190,13 +190,12 @@ static struct mtd_info *probe_cs(struct map_info *map_cs) "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n", map_cs->name, map_cs->size, map_cs->map_priv_1); -#ifdef CONFIG_MTD_AMDSTD - mtd_cs = do_map_probe("amd_flash", map_cs); -#endif #ifdef CONFIG_MTD_CFI - if (!mtd_cs) { mtd_cs = do_map_probe("cfi_probe", map_cs); - } +#endif +#ifdef CONFIG_MTD_JEDECPROBE + if (!mtd_cs) + mtd_cs = do_map_probe("jedec_probe", map_cs); #endif return mtd_cs; diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c index df89298aafc4..d581b0a92a3f 100644 --- a/arch/cris/arch-v32/drivers/sync_serial.c +++ b/arch/cris/arch-v32/drivers/sync_serial.c @@ -185,7 +185,7 @@ static struct sync_port ports[]= } }; -#define NUMBER_OF_PORTS (sizeof(ports)/sizeof(sync_port)) +#define NUMBER_OF_PORTS ARRAY_SIZE(ports) static const struct file_operations sync_serial_fops = { .owner = THIS_MODULE, diff --git a/arch/cris/arch-v32/kernel/cache.c b/arch/cris/arch-v32/kernel/cache.c new file mode 100644 index 000000000000..80da7b88a72b --- /dev/null +++ b/arch/cris/arch-v32/kernel/cache.c @@ -0,0 +1,33 @@ +#include <linux/module.h> +#include <asm/io.h> +#include <asm/arch/cache.h> +#include <asm/arch/hwregs/dma.h> + +/* This file is used to workaround a cache bug, Guinness TR 106. */ + +inline void flush_dma_descr(struct dma_descr_data *descr, int flush_buf) +{ + /* Flush descriptor to make sure we get correct in_eop and after. */ + asm volatile ("ftagd [%0]" :: "r" (descr)); + /* Flush buffer pointed out by descriptor. */ + if (flush_buf) + cris_flush_cache_range(phys_to_virt((unsigned)descr->buf), + (unsigned)(descr->after - descr->buf)); +} +EXPORT_SYMBOL(flush_dma_descr); + +void flush_dma_list(struct dma_descr_data *descr) +{ + while (1) { + flush_dma_descr(descr, 1); + if (descr->eol) + break; + descr = phys_to_virt((unsigned)descr->next); + } +} +EXPORT_SYMBOL(flush_dma_list); + +/* From cacheflush.S */ +EXPORT_SYMBOL(cris_flush_cache); +/* From cacheflush.S */ +EXPORT_SYMBOL(cris_flush_cache_range); diff --git a/arch/cris/arch-v32/kernel/cacheflush.S b/arch/cris/arch-v32/kernel/cacheflush.S new file mode 100644 index 000000000000..956e8fb82f01 --- /dev/null +++ b/arch/cris/arch-v32/kernel/cacheflush.S @@ -0,0 +1,94 @@ + .global cris_flush_cache_range +cris_flush_cache_range: + move.d 1024, $r12 + cmp.d $r11, $r12 + bhi cris_flush_1KB + nop + add.d $r10, $r11 + ftagd [$r10] +cris_flush_last: + addq 32, $r10 + cmp.d $r11, $r10 + blt cris_flush_last + ftagd [$r10] + ret + nop +cris_flush_1KB: + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ftagd [$r10] + addq 32, $r10 + ba cris_flush_cache_range + sub.d $r12, $r11 + + .global cris_flush_cache +cris_flush_cache: + moveq 0, $r10 +cris_flush_line: + move.d 16*1024, $r11 + addq 16, $r10 + cmp.d $r10, $r11 + blt cris_flush_line + fidxd [$r10] + ret + nop diff --git a/arch/cris/arch-v32/kernel/io.c b/arch/cris/arch-v32/kernel/io.c index dfbfcb8d2585..a22a9e02e093 100644 --- a/arch/cris/arch-v32/kernel/io.c +++ b/arch/cris/arch-v32/kernel/io.c @@ -49,7 +49,7 @@ struct crisv32_ioport crisv32_ioports[] = } }; -#define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport) +#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports) struct crisv32_iopin crisv32_led1_green; struct crisv32_iopin crisv32_led1_red; diff --git a/arch/cris/arch-v32/kernel/setup.c b/arch/cris/arch-v32/kernel/setup.c index 4662f363df63..72e9e8331f63 100644 --- a/arch/cris/arch-v32/kernel/setup.c +++ b/arch/cris/arch-v32/kernel/setup.c @@ -54,12 +54,10 @@ show_cpuinfo(struct seq_file *m, void *v) { int i; int cpu = (int)v - 1; - int entries; unsigned long revision; struct cpu_info *info; - entries = sizeof cpinfo / sizeof(struct cpu_info); - info = &cpinfo[entries - 1]; + info = &cpinfo[ARRAY_SIZE(cpinfo) - 1]; #ifdef CONFIG_SMP if (!cpu_online(cpu)) @@ -68,7 +66,7 @@ show_cpuinfo(struct seq_file *m, void *v) revision = rdvr(); - for (i = 0; i < entries; i++) { + for (i = 0; i < ARRAY_SIZE(cpinfo); i++) { if (cpinfo[i].rev == revision) { info = &cpinfo[i]; break; diff --git a/arch/cris/defconfig b/arch/cris/defconfig index 142a10818af3..9c33ae659934 100644 --- a/arch/cris/defconfig +++ b/arch/cris/defconfig @@ -226,8 +226,6 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -CONFIG_MTD_OBSOLETE_CHIPS=y -CONFIG_MTD_AMDSTD=y # CONFIG_MTD_SHARP is not set # CONFIG_MTD_JEDEC is not set @@ -276,6 +274,7 @@ CONFIG_MTDRAM_ABS_POS=0x0 # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y @@ -302,16 +301,14 @@ CONFIG_IOSCHED_CFQ=y # # ATA/ATAPI/MFM/RLL support # -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y +# CONFIG_IDE is not set +# CONFIG_PARIDE is not set # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set @@ -321,7 +318,6 @@ CONFIG_BLK_DEV_IDECD=y # # CONFIG_IDE_GENERIC is not set # CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set @@ -329,6 +325,7 @@ CONFIG_BLK_DEV_IDEDMA=y # SCSI device support # # CONFIG_SCSI is not set +# CONFIG_ISCSI_TCP is not set # # IEEE 1394 (FireWire) support @@ -414,26 +411,11 @@ CONFIG_NETFILTER=y # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set -CONFIG_BT=y -CONFIG_BT_L2CAP=y -# CONFIG_BT_SCO is not set -CONFIG_BT_RFCOMM=y -# CONFIG_BT_RFCOMM_TTY is not set -CONFIG_BT_BNEP=y -# CONFIG_BT_BNEP_MC_FILTER is not set -# CONFIG_BT_BNEP_PROTO_FILTER is not set -# CONFIG_BT_HIDP is not set - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=y -# CONFIG_BT_HCIUSB_SCO is not set -# CONFIG_BT_HCIUART is not set -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_AF_RXRPC_DEBUG is not set +# CONFIG_BT is not set +# CONFIG_I2C is not set + CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -485,31 +467,17 @@ CONFIG_NET_ETHERNET=y # # Input device support # -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT is not set # # Input I/O drivers # -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y # CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set # # Input Device Drivers @@ -525,6 +493,7 @@ CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -542,6 +511,8 @@ CONFIG_MOUSE_PS2=y # # Non-8250 serial port support # +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -559,6 +530,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set +# CONFIG_RTC_LIB is not set +# CONFIG_RTC_CLASS is not set # # Ftape, the floppy tape device driver @@ -660,7 +633,9 @@ CONFIG_NFS_V3=y # CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -686,9 +661,21 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SOUND is not set # +# Generic devices +# +# CONFIG_SND_MPU401_UART is not set +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set +# CONFIG_PARPORT_PC_PCMCIA is not set +# CONFIG_NET_PCMCIA is not set # # PC-card bridges @@ -734,6 +721,7 @@ CONFIG_USB_DEVICEFS=y # USB Input Devices # # CONFIG_USB_HID is not set +# HID_SUPPORT is not set # # USB HID Boot Protocol drivers @@ -829,7 +817,7 @@ CONFIG_USB_RTL8150=y # # Hardware crypto devices -# +# CONFIG_CRYPTO_HW is not set # # Library routines diff --git a/arch/cris/kernel/crisksyms.c b/arch/cris/kernel/crisksyms.c index 105bb5ed48f7..62f0e752915a 100644 --- a/arch/cris/kernel/crisksyms.c +++ b/arch/cris/kernel/crisksyms.c @@ -27,6 +27,7 @@ extern void __Mod(void); extern void __ashldi3(void); extern void __ashrdi3(void); extern void __lshrdi3(void); +extern void __negdi2(void); extern void iounmap(volatile void * __iomem); /* Platform dependent support */ @@ -34,19 +35,6 @@ EXPORT_SYMBOL(kernel_thread); EXPORT_SYMBOL(get_cmos_time); EXPORT_SYMBOL(loops_per_usec); -/* String functions */ -EXPORT_SYMBOL(memcmp); -EXPORT_SYMBOL(memmove); -EXPORT_SYMBOL(strstr); -EXPORT_SYMBOL(strcpy); -EXPORT_SYMBOL(strchr); -EXPORT_SYMBOL(strcmp); -EXPORT_SYMBOL(strlen); -EXPORT_SYMBOL(strcat); -EXPORT_SYMBOL(strncat); -EXPORT_SYMBOL(strncmp); -EXPORT_SYMBOL(strncpy); - /* Math functions */ EXPORT_SYMBOL(__Udiv); EXPORT_SYMBOL(__Umod); @@ -55,6 +43,7 @@ EXPORT_SYMBOL(__Mod); EXPORT_SYMBOL(__ashldi3); EXPORT_SYMBOL(__ashrdi3); EXPORT_SYMBOL(__lshrdi3); +EXPORT_SYMBOL(__negdi2); /* Memory functions */ EXPORT_SYMBOL(__ioremap); @@ -84,4 +73,4 @@ EXPORT_SYMBOL(start_one_shot_timer); EXPORT_SYMBOL(del_fast_timer); EXPORT_SYMBOL(schedule_usleep); #endif - +EXPORT_SYMBOL(csum_partial); diff --git a/arch/cris/kernel/irq.c b/arch/cris/kernel/irq.c index 5c27ff86121b..2dfac8c79090 100644 --- a/arch/cris/kernel/irq.c +++ b/arch/cris/kernel/irq.c @@ -2,7 +2,7 @@ * * linux/arch/cris/kernel/irq.c * - * Copyright (c) 2000,2001 Axis Communications AB + * Copyright (c) 2000,2007 Axis Communications AB * * Authors: Bjorn Wesen (bjornw@axis.com) * @@ -92,14 +92,16 @@ skip: asmlinkage void do_IRQ(int irq, struct pt_regs * regs) { unsigned long sp; + struct pt_regs *old_regs = set_irq_regs(regs); irq_enter(); sp = rdsp(); if (unlikely((sp & (PAGE_SIZE - 1)) < (PAGE_SIZE/8))) { printk("do_IRQ: stack overflow: %lX\n", sp); show_stack(NULL, (unsigned long *)sp); } - __do_IRQ(irq, regs); + __do_IRQ(irq); irq_exit(); + set_irq_regs(old_regs); } void weird_irq(void) diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c index 123451c44154..9ca558fc5bc8 100644 --- a/arch/cris/kernel/process.c +++ b/arch/cris/kernel/process.c @@ -195,6 +195,11 @@ EXPORT_SYMBOL(enable_hlt); */ void (*pm_idle)(void); +extern void default_idle(void); + +void (*pm_power_off)(void); +EXPORT_SYMBOL(pm_power_off); + /* * The idle thread. There's no useful work to be * done, so just try to conserve power and have a diff --git a/arch/cris/kernel/ptrace.c b/arch/cris/kernel/ptrace.c index 1085d037027b..3ccd20e85dce 100644 --- a/arch/cris/kernel/ptrace.c +++ b/arch/cris/kernel/ptrace.c @@ -81,13 +81,13 @@ /* notification of userspace execution resumption * - triggered by current->work.notify_resume */ -extern int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs); +extern int do_signal(int canrestart, struct pt_regs *regs); -void do_notify_resume(int canrestart, sigset_t *oldset, struct pt_regs *regs, +void do_notify_resume(int canrestart, struct pt_regs *regs, __u32 thread_info_flags ) { /* deal with pending signal delivery */ if (thread_info_flags & _TIF_SIGPENDING) - do_signal(canrestart,oldset,regs); + do_signal(canrestart,regs); } diff --git a/arch/cris/kernel/sys_cris.c b/arch/cris/kernel/sys_cris.c index 514359b8122e..8b9984197edc 100644 --- a/arch/cris/kernel/sys_cris.c +++ b/arch/cris/kernel/sys_cris.c @@ -13,6 +13,7 @@ #include <linux/sched.h> #include <linux/syscalls.h> #include <linux/mm.h> +#include <linux/fs.h> #include <linux/smp.h> #include <linux/smp_lock.h> #include <linux/sem.h> diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c index acfd04559405..7a2cc7efbcf8 100644 --- a/arch/cris/kernel/time.c +++ b/arch/cris/kernel/time.c @@ -171,10 +171,6 @@ get_cmos_time(void) mon = CMOS_READ(RTC_MONTH); year = CMOS_READ(RTC_YEAR); - printk(KERN_DEBUG - "rtc: sec 0x%x min 0x%x hour 0x%x day 0x%x mon 0x%x year 0x%x\n", - sec, min, hour, day, mon, year); - BCD_TO_BIN(sec); BCD_TO_BIN(min); BCD_TO_BIN(hour); @@ -207,12 +203,12 @@ void cris_do_profile(struct pt_regs* regs) { -#if CONFIG_SYSTEM_PROFILER +#ifdef CONFIG_SYSTEM_PROFILER cris_profile_sample(regs); #endif -#if CONFIG_PROFILING - profile_tick(CPU_PROFILING, regs); +#ifdef CONFIG_PROFILING + profile_tick(CPU_PROFILING); #endif } diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index 5181bf551f3c..8e8f8b6193ee 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -1113,7 +1113,7 @@ efi_initialize_iomem_resources(struct resource *code_resource, if (md->num_pages == 0) /* should not happen */ continue; - flags = IORESOURCE_MEM; + flags = IORESOURCE_MEM | IORESOURCE_BUSY; switch (md->type) { case EFI_MEMORY_MAPPED_IO: @@ -1135,12 +1135,11 @@ efi_initialize_iomem_resources(struct resource *code_resource, case EFI_ACPI_MEMORY_NVS: name = "ACPI Non-volatile Storage"; - flags |= IORESOURCE_BUSY; break; case EFI_UNUSABLE_MEMORY: name = "reserved"; - flags |= IORESOURCE_BUSY | IORESOURCE_DISABLED; + flags |= IORESOURCE_DISABLED; break; case EFI_RESERVED_TYPE: @@ -1149,7 +1148,6 @@ efi_initialize_iomem_resources(struct resource *code_resource, case EFI_ACPI_RECLAIM_MEMORY: default: name = "reserved"; - flags |= IORESOURCE_BUSY; break; } diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 2c7d6c240b73..2f2ce0c28bc0 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -361,10 +361,10 @@ config QEMU select PCSPEAKER select SWAP_IO_SPACE select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN - select ARCH_SPARSEMEM_ENABLE select GENERIC_HARDIRQS_NO__DO_IRQ select NR_CPUS_DEFAULT_1 select SYS_SUPPORTS_SMP @@ -1409,7 +1409,6 @@ config MIPS_MT_SMP depends on SYS_SUPPORTS_MULTITHREADING select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_IRQ_EI - select CPU_MIPSR2_SRS select MIPS_MT select NR_CPUS_DEFAULT_2 select SMP @@ -1426,7 +1425,6 @@ config MIPS_MT_SMTC select GENERIC_CLOCKEVENTS_BROADCAST select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_IRQ_EI - select CPU_MIPSR2_SRS select MIPS_MT select NR_CPUS_DEFAULT_8 select SMP @@ -1453,7 +1451,6 @@ config MIPS_VPE_LOADER depends on SYS_SUPPORTS_MULTITHREADING select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_IRQ_EI - select CPU_MIPSR2_SRS select MIPS_MT help Includes a loader for loading an elf relocatable object @@ -1582,12 +1579,6 @@ config CPU_MIPSR2_IRQ_VI config CPU_MIPSR2_IRQ_EI bool -# -# Shadow registers are an R2 feature -# -config CPU_MIPSR2_SRS - bool - config CPU_HAS_SYNC bool depends on !CPU_R3000 diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 23c17755eca0..a1f8d8b96b03 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -44,7 +44,7 @@ endif ifneq ($(SUBARCH),$(ARCH)) ifeq ($(CROSS_COMPILE),) - CROSS_COMPILE := $(call cc-cross-prefix, $(tool-archpref)-linux- $(tool-archpref)-gnu-linux- $(tool-archpref)-unknown-gnu-linux-) + CROSS_COMPILE := $(call cc-cross-prefix, $(tool-archpref)-linux- $(tool-archpref)-linux-gnu- $(tool-archpref)-unknown-linux-gnu-) endif endif diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c index 21e6d63eb4d1..0a57f86945f1 100644 --- a/arch/mips/kernel/cevt-bcm1480.c +++ b/arch/mips/kernel/cevt-bcm1480.c @@ -75,6 +75,7 @@ static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd) cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)); + __raw_writeq(0, cfg); __raw_writeq(delta - 1, init); __raw_writeq(M_SCD_TIMER_ENABLE, cfg); @@ -122,7 +123,7 @@ void __cpuinit sb1480_clockevent_init(void) CLOCK_EVT_FEAT_ONESHOT; clockevent_set_clock(cd, V_SCD_TIMER_FREQ); cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd); - cd->min_delta_ns = clockevent_delta2ns(1, cd); + cd->min_delta_ns = clockevent_delta2ns(2, cd); cd->rating = 200; cd->irq = irq; cd->cpumask = cpumask_of_cpu(cpu); @@ -143,7 +144,10 @@ void __cpuinit sb1480_clockevent_init(void) action->handler = sibyte_counter_handler; action->flags = IRQF_DISABLED | IRQF_PERCPU; + action->mask = cpumask_of_cpu(cpu); action->name = name; action->dev_id = cd; + + irq_set_affinity(irq, cpumask_of_cpu(cpu)); setup_irq(irq, action); } diff --git a/arch/mips/kernel/cevt-sb1250.c b/arch/mips/kernel/cevt-sb1250.c index e2029d0fc39b..63ac3ad462bc 100644 --- a/arch/mips/kernel/cevt-sb1250.c +++ b/arch/mips/kernel/cevt-sb1250.c @@ -73,6 +73,7 @@ static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd) cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)); + __raw_writeq(0, cfg); __raw_writeq(delta - 1, init); __raw_writeq(M_SCD_TIMER_ENABLE, cfg); @@ -121,7 +122,7 @@ void __cpuinit sb1250_clockevent_init(void) CLOCK_EVT_FEAT_ONESHOT; clockevent_set_clock(cd, V_SCD_TIMER_FREQ); cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd); - cd->min_delta_ns = clockevent_delta2ns(1, cd); + cd->min_delta_ns = clockevent_delta2ns(2, cd); cd->rating = 200; cd->irq = irq; cd->cpumask = cpumask_of_cpu(cpu); @@ -142,7 +143,10 @@ void __cpuinit sb1250_clockevent_init(void) action->handler = sibyte_counter_handler; action->flags = IRQF_DISABLED | IRQF_PERCPU; + action->mask = cpumask_of_cpu(cpu); action->name = name; action->dev_id = cd; + + irq_set_affinity(irq, cpumask_of_cpu(cpu)); setup_irq(irq, action); } diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index c8c47a2d1972..5c2794391bf5 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -943,6 +943,11 @@ __init void cpu_probe(void) } __cpu_name[cpu] = cpu_to_name(c); + + if (cpu_has_mips_r2) + c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1; + else + c->srsets = 1; } __init void cpu_report(void) diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c index ebb16e668877..92212bbb8e45 100644 --- a/arch/mips/kernel/csrc-sb1250.c +++ b/arch/mips/kernel/csrc-sb1250.c @@ -43,7 +43,7 @@ static cycle_t sb1250_hpt_read(void) } struct clocksource bcm1250_clocksource = { - .name = "MIPS", + .name = "bcm1250-counter-3", .rating = 200, .read = sb1250_hpt_read, .mask = CLOCKSOURCE_MASK(23), diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index c0f19d638b98..e76a76bf0b3d 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -146,7 +146,7 @@ NESTED(handle_int, PT_SIZE, sp) and k0, ST0_IEP bnez k0, 1f - mfc0 k0, EP0_EPC + mfc0 k0, CP0_EPC .set noreorder j k0 rfe diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c index 33506ff25910..5b10ac133ec8 100644 --- a/arch/mips/kernel/irixsig.c +++ b/arch/mips/kernel/irixsig.c @@ -430,6 +430,7 @@ asmlinkage int irix_sigprocmask(int how, irix_sigset_t __user *new, break; default: + spin_unlock_irq(¤t->sighand->siglock); return -EINVAL; } recalc_sigpending(); diff --git a/arch/mips/kernel/irq-rm7000.c b/arch/mips/kernel/irq-rm7000.c index 250732883488..971adf6ef4f4 100644 --- a/arch/mips/kernel/irq-rm7000.c +++ b/arch/mips/kernel/irq-rm7000.c @@ -44,5 +44,5 @@ void __init rm7k_cpu_irq_init(void) for (i = base; i < base + 4; i++) set_irq_chip_and_handler(i, &rm7k_irq_controller, - handle_level_irq); + handle_percpu_irq); } diff --git a/arch/mips/kernel/irq-rm9000.c b/arch/mips/kernel/irq-rm9000.c index ae83d2df6f31..7b04583bd800 100644 --- a/arch/mips/kernel/irq-rm9000.c +++ b/arch/mips/kernel/irq-rm9000.c @@ -104,5 +104,5 @@ void __init rm9k_cpu_irq_init(void) rm9000_perfcount_irq = base + 1; set_irq_chip_and_handler(rm9000_perfcount_irq, &rm9k_perfcounter_irq, - handle_level_irq); + handle_percpu_irq); } diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c index 7b66e03b5899..0ee2567b780d 100644 --- a/arch/mips/kernel/irq_cpu.c +++ b/arch/mips/kernel/irq_cpu.c @@ -116,5 +116,5 @@ void __init mips_cpu_irq_init(void) for (i = irq_base + 2; i < irq_base + 8; i++) set_irq_chip_and_handler(i, &mips_cpu_irq_controller, - handle_level_irq); + handle_percpu_irq); } diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index efd2d1314123..6e6e947cce1e 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -60,6 +60,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) cpu_has_dsp ? " dsp" : "", cpu_has_mipsmt ? " mt" : "" ); + seq_printf(m, "shadow register sets\t: %d\n", + cpu_data[n].srsets); sprintf(fmt, "VCE%%c exceptions\t\t: %s\n", cpu_has_vce ? "%u" : "not available"); diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 118be24224f2..01993ec3368b 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -293,7 +293,7 @@ EXPORT(sysn32_call_table) PTR sys_ni_syscall /* 6170, was get_kernel_syms */ PTR sys_ni_syscall /* was query_module */ PTR sys_quotactl - PTR sys_nfsservctl + PTR compat_sys_nfsservctl PTR sys_ni_syscall /* res. for getpmsg */ PTR sys_ni_syscall /* 6175 for putpmsg */ PTR sys_ni_syscall /* res. for afs_syscall */ diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index fa500787152d..23e73d0650a3 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1100,59 +1100,6 @@ void *set_except_vector(int n, void *addr) return (void *)old_handler; } -#ifdef CONFIG_CPU_MIPSR2_SRS -/* - * MIPSR2 shadow register set allocation - * FIXME: SMP... - */ - -static struct shadow_registers { - /* - * Number of shadow register sets supported - */ - unsigned long sr_supported; - /* - * Bitmap of allocated shadow registers - */ - unsigned long sr_allocated; -} shadow_registers; - -static void mips_srs_init(void) -{ - shadow_registers.sr_supported = ((read_c0_srsctl() >> 26) & 0x0f) + 1; - printk(KERN_INFO "%ld MIPSR2 register sets available\n", - shadow_registers.sr_supported); - shadow_registers.sr_allocated = 1; /* Set 0 used by kernel */ -} - -int mips_srs_max(void) -{ - return shadow_registers.sr_supported; -} - -int mips_srs_alloc(void) -{ - struct shadow_registers *sr = &shadow_registers; - int set; - -again: - set = find_first_zero_bit(&sr->sr_allocated, sr->sr_supported); - if (set >= sr->sr_supported) - return -1; - - if (test_and_set_bit(set, &sr->sr_allocated)) - goto again; - - return set; -} - -void mips_srs_free(int set) -{ - struct shadow_registers *sr = &shadow_registers; - - clear_bit(set, &sr->sr_allocated); -} - static asmlinkage void do_default_vi(void) { show_regs(get_irq_regs()); @@ -1163,6 +1110,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) { unsigned long handler; unsigned long old_handler = vi_handlers[n]; + int srssets = current_cpu_data.srsets; u32 *w; unsigned char *b; @@ -1178,7 +1126,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) b = (unsigned char *)(ebase + 0x200 + n*VECTORSPACING); - if (srs >= mips_srs_max()) + if (srs >= srssets) panic("Shadow register set %d not supported", srs); if (cpu_has_veic) { @@ -1186,7 +1134,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) board_bind_eic_interrupt(n, srs); } else if (cpu_has_vint) { /* SRSMap is only defined if shadow sets are implemented */ - if (mips_srs_max() > 1) + if (srssets > 1) change_c0_srsmap(0xf << n*4, srs << n*4); } @@ -1253,14 +1201,6 @@ void *set_vi_handler(int n, vi_handler_t addr) return set_vi_srs_handler(n, addr, 0); } -#else - -static inline void mips_srs_init(void) -{ -} - -#endif /* CONFIG_CPU_MIPSR2_SRS */ - /* * This is used by native signal handling */ @@ -1503,8 +1443,6 @@ void __init trap_init(void) else ebase = CAC_BASE; - mips_srs_init(); - per_cpu_trap_init(); /* diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 436a64ff3989..38bd33fa2a23 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -1003,6 +1003,7 @@ static void cleanup_tc(struct tc *tc) write_tc_c0_tcstatus(tmp); write_tc_c0_tchalt(TCHALT_H); + mips_ihb(); /* bind it to anything other than VPE1 */ // write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE @@ -1235,9 +1236,12 @@ int vpe_free(vpe_handle vpe) settc(t->index); write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA); - /* mark the TC unallocated and halt'ed */ - write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A); + /* halt the TC */ write_tc_c0_tchalt(TCHALT_H); + mips_ihb(); + + /* mark the TC unallocated */ + write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A); v->state = VPE_STATE_UNUSED; @@ -1533,14 +1537,16 @@ static int __init vpe_module_init(void) t->pvpe = get_vpe(0); /* set the parent vpe */ } + /* halt the TC */ + write_tc_c0_tchalt(TCHALT_H); + mips_ihb(); + tmp = read_tc_c0_tcstatus(); /* mark not activated and not dynamically allocatable */ tmp &= ~(TCSTATUS_A | TCSTATUS_DA); tmp |= TCSTATUS_IXMT; /* interrupt exempt */ write_tc_c0_tcstatus(tmp); - - write_tc_c0_tchalt(TCHALT_H); } } diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c index ba9692be3564..cfeab669782f 100644 --- a/arch/mips/lasat/interrupt.c +++ b/arch/mips/lasat/interrupt.c @@ -19,17 +19,14 @@ * Lasat boards. */ #include <linux/init.h> -#include <linux/irq.h> -#include <linux/sched.h> -#include <linux/slab.h> #include <linux/interrupt.h> -#include <linux/kernel_stat.h> +#include <linux/irq.h> #include <asm/bootinfo.h> #include <asm/irq_cpu.h> #include <asm/lasat/lasatint.h> -#include <asm/time.h> -#include <asm/gdb-stub.h> + +#include <irq.h> static volatile int *lasat_int_status; static volatile int *lasat_int_mask; @@ -97,12 +94,18 @@ asmlinkage void plat_irq_dispatch(void) /* if int_status == 0, then the interrupt has already been cleared */ if (int_status) { - irq = LASATINT_BASE + ls1bit32(int_status); + irq = LASAT_IRQ_BASE + ls1bit32(int_status); do_IRQ(irq); } } +static struct irqaction cascade = { + .handler = no_action, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; + void __init arch_init_irq(void) { int i; @@ -127,6 +130,9 @@ void __init arch_init_irq(void) } mips_cpu_irq_init(); - for (i = LASATINT_BASE; i <= LASATINT_END; i++) + + for (i = LASAT_IRQ_BASE; i <= LASAT_IRQ_END; i++) set_irq_chip_and_handler(i, &lasat_irq_type, handle_level_irq); + + setup_irq(LASAT_CASCADE_IRQ, &cascade); } diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 6806d58211b2..9355f1c9325f 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -7,6 +7,7 @@ * Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002 Ralf Baechle (ralf@gnu.org) * Copyright (C) 1999, 2000 Silicon Graphics, Inc. */ +#include <linux/hardirq.h> #include <linux/init.h> #include <linux/highmem.h> #include <linux/kernel.h> @@ -507,7 +508,11 @@ static inline void local_r4k_flush_data_cache_page(void * addr) static void r4k_flush_data_cache_page(unsigned long addr) { - r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1); + if (in_atomic()) + local_r4k_flush_data_cache_page((void *)addr); + else + r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, + 1, 1); } struct flush_icache_range_args { diff --git a/arch/mips/mm/cerr-sb1.c b/arch/mips/mm/cerr-sb1.c index e7f539e3284b..1bd1f18ac23c 100644 --- a/arch/mips/mm/cerr-sb1.c +++ b/arch/mips/mm/cerr-sb1.c @@ -154,7 +154,7 @@ static void check_bus_watcher(void) if (status & ~(1UL << 31)) { l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS)); #ifdef DUMP_L2_ECC_TAG_ON_ERROR - l2_tag = in64(IO_SPACE_BASE | A_L2_ECC_TAG); + l2_tag = in64(IOADDR(A_L2_ECC_TAG)); #endif memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS)); printk("Bus watcher error counters: %08x %08x\n", l2_err, memio_err); @@ -183,9 +183,9 @@ asmlinkage void sb1_cache_error(void) #ifdef CONFIG_SIBYTE_BW_TRACE /* Freeze the trace buffer now */ #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) - csr_out32(M_BCM1480_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG); + csr_out32(M_BCM1480_SCD_TRACE_CFG_FREEZE, IOADDR(A_SCD_TRACE_CFG)); #else - csr_out32(M_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG); + csr_out32(M_SCD_TRACE_CFG_FREEZE, IOADDR(A_SCD_TRACE_CFG)); #endif printk("Trace buffer frozen\n"); #endif diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 110ee7656b41..ec3b9e9f30f4 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -426,7 +426,7 @@ void __init mem_init(void) #ifdef CONFIG_HIGHMEM for (tmp = highstart_pfn; tmp < highend_pfn; tmp++) { - struct page *page = mem_map + tmp; + struct page *page = pfn_to_page(tmp); if (!page_is_ram(tmp)) { SetPageReserved(page); diff --git a/arch/mips/pci/fixup-sni.c b/arch/mips/pci/fixup-sni.c index a45bedd17233..5c8a79bb2661 100644 --- a/arch/mips/pci/fixup-sni.c +++ b/arch/mips/pci/fixup-sni.c @@ -113,6 +113,16 @@ static char irq_tab_pcit[13][5] __initdata = { { 0, INTA, INTB, INTC, INTD }, /* Slot 5 */ }; +static char irq_tab_pcit_cplus[13][5] __initdata = { + /* INTA INTB INTC INTD */ + { 0, 0, 0, 0, 0 }, /* HOST bridge */ + { 0, INTB, INTC, INTD, INTA }, /* PCI Slot 9 */ + { 0, 0, 0, 0, 0 }, /* PCI-EISA */ + { 0, 0, 0, 0, 0 }, /* Unused */ + { 0, INTA, INTB, INTC, INTD }, /* PCI-PCI bridge */ + { 0, INTB, INTC, INTD, INTA }, /* fixup */ +}; + static inline int is_rm300_revd(void) { unsigned char csmsr = *(volatile unsigned char *)PCIMT_CSMSR; @@ -123,8 +133,19 @@ static inline int is_rm300_revd(void) int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { switch (sni_brd_type) { - case SNI_BRD_PCI_TOWER: case SNI_BRD_PCI_TOWER_CPLUS: + if (slot == 4) { + /* + * SNI messed up interrupt wiring for onboard + * PCI bus 1; we need to fix this up here + */ + while (dev && dev->bus->number != 1) + dev = dev->bus->self; + if (dev && dev->devfn >= PCI_DEVFN(4, 0)) + slot = 5; + } + return irq_tab_pcit_cplus[slot][pin]; + case SNI_BRD_PCI_TOWER: return irq_tab_pcit[slot][pin]; case SNI_BRD_PCI_MTOWER: diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c index 174f314933b5..e70ae3236e0b 100644 --- a/arch/mips/pci/pci-lasat.c +++ b/arch/mips/pci/pci-lasat.c @@ -5,12 +5,14 @@ * * Copyright (C) 2000, 2001, 04 Keith M Wesolowski */ -#include <linux/kernel.h> #include <linux/init.h> +#include <linux/kernel.h> #include <linux/pci.h> #include <linux/types.h> + #include <asm/bootinfo.h> -#include <asm/lasat/lasatint.h> + +#include <irq.h> extern struct pci_ops nile4_pci_ops; extern struct pci_ops gt64xxx_pci0_ops; @@ -55,15 +57,15 @@ static int __init lasat_pci_setup(void) arch_initcall(lasat_pci_setup); -#define LASATINT_ETH1 (LASATINT_BASE + 0) -#define LASATINT_ETH0 (LASATINT_BASE + 1) -#define LASATINT_HDC (LASATINT_BASE + 2) -#define LASATINT_COMP (LASATINT_BASE + 3) -#define LASATINT_HDLC (LASATINT_BASE + 4) -#define LASATINT_PCIA (LASATINT_BASE + 5) -#define LASATINT_PCIB (LASATINT_BASE + 6) -#define LASATINT_PCIC (LASATINT_BASE + 7) -#define LASATINT_PCID (LASATINT_BASE + 8) +#define LASAT_IRQ_ETH1 (LASAT_IRQ_BASE + 0) +#define LASAT_IRQ_ETH0 (LASAT_IRQ_BASE + 1) +#define LASAT_IRQ_HDC (LASAT_IRQ_BASE + 2) +#define LASAT_IRQ_COMP (LASAT_IRQ_BASE + 3) +#define LASAT_IRQ_HDLC (LASAT_IRQ_BASE + 4) +#define LASAT_IRQ_PCIA (LASAT_IRQ_BASE + 5) +#define LASAT_IRQ_PCIB (LASAT_IRQ_BASE + 6) +#define LASAT_IRQ_PCIC (LASAT_IRQ_BASE + 7) +#define LASAT_IRQ_PCID (LASAT_IRQ_BASE + 8) int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { @@ -71,13 +73,13 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) case 1: case 2: case 3: - return LASATINT_PCIA + (((slot-1) + (pin-1)) % 4); + return LASAT_IRQ_PCIA + (((slot-1) + (pin-1)) % 4); case 4: - return LASATINT_ETH1; /* Ethernet 1 (LAN 2) */ + return LASAT_IRQ_ETH1; /* Ethernet 1 (LAN 2) */ case 5: - return LASATINT_ETH0; /* Ethernet 0 (LAN 1) */ + return LASAT_IRQ_ETH0; /* Ethernet 0 (LAN 1) */ case 6: - return LASATINT_HDC; /* IDE controller */ + return LASAT_IRQ_HDC; /* IDE controller */ default: return 0xff; /* Illegal */ } diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c index 240df9e33813..33c4f683d067 100644 --- a/arch/mips/pci/pci-vr41xx.c +++ b/arch/mips/pci/pci-vr41xx.c @@ -154,6 +154,7 @@ static int __init vr41xx_pciu_init(void) pciu_write(PCICLKSELREG, QUARTER_VTCLOCK); else { printk(KERN_ERR "PCI Clock is over 33MHz.\n"); + iounmap(pciu_base); return -EINVAL; } diff --git a/arch/mips/qemu/Makefile b/arch/mips/qemu/Makefile index cec24c117f6e..2ba4ef34b4a7 100644 --- a/arch/mips/qemu/Makefile +++ b/arch/mips/qemu/Makefile @@ -4,6 +4,7 @@ obj-y = q-firmware.o q-irq.o q-mem.o q-setup.o q-reset.o -obj-$(CONFIG_SMP) += q-smp.o +obj-$(CONFIG_EARLY_PRINTK) += q-console.o +obj-$(CONFIG_SMP) += q-smp.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/qemu/q-console.c b/arch/mips/qemu/q-console.c new file mode 100644 index 000000000000..81101ae5017a --- /dev/null +++ b/arch/mips/qemu/q-console.c @@ -0,0 +1,26 @@ +#include <linux/console.h> +#include <linux/init.h> +#include <linux/serial_reg.h> +#include <asm/io.h> + +#define PORT(offset) (0x3f8 + (offset)) + +static inline unsigned int serial_in(int offset) +{ + return inb(PORT(offset)); +} + +static inline void serial_out(int offset, int value) +{ + outb(value, PORT(offset)); +} + +int prom_putchar(char c) +{ + while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0) + ; + + serial_out(UART_TX, c); + + return 1; +} diff --git a/arch/mips/qemu/q-firmware.c b/arch/mips/qemu/q-firmware.c index c2239b417587..3ed43f416cd1 100644 --- a/arch/mips/qemu/q-firmware.c +++ b/arch/mips/qemu/q-firmware.c @@ -2,6 +2,9 @@ #include <linux/string.h> #include <asm/addrspace.h> #include <asm/bootinfo.h> +#include <asm/io.h> + +#define QEMU_PORT_BASE 0xb4000000 void __init prom_init(void) { @@ -15,4 +18,7 @@ void __init prom_init(void) } else { add_memory_region(0x0<<20, 0x10<<20, BOOT_MEM_RAM); } + + + set_io_port_base(QEMU_PORT_BASE); } diff --git a/arch/mips/qemu/q-setup.c b/arch/mips/qemu/q-setup.c index 23d34c1917c0..969cedc8d8b9 100644 --- a/arch/mips/qemu/q-setup.c +++ b/arch/mips/qemu/q-setup.c @@ -6,8 +6,6 @@ extern void qemu_reboot_setup(void); -#define QEMU_PORT_BASE 0xb4000000 - const char *get_system_type(void) { return "Qemu"; @@ -20,6 +18,5 @@ void __init plat_time_init(void) void __init plat_mem_setup(void) { - set_io_port_base(QEMU_PORT_BASE); qemu_reboot_setup(); } diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index e28d626255a3..db372a0f106d 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -370,11 +370,11 @@ void __init arch_init_irq(void) #endif /* Setup uart 1 settings, mapper */ /* QQQ FIXME */ - __raw_writeq(M_DUART_IMR_BRK, IO_SPACE_BASE + A_DUART_IMRREG(kgdb_port)); + __raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port))); __raw_writeq(IMR_IP6_VAL, - IO_SPACE_BASE + A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + - (kgdb_irq<<3)); + IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + + (kgdb_irq << 3))); bcm1480_unmask_irq(0, kgdb_irq); #ifdef CONFIG_GDB_CONSOLE @@ -412,18 +412,6 @@ static void bcm1480_kgdb_interrupt(void) extern void bcm1480_mailbox_interrupt(void); -static inline void dispatch_ip4(void) -{ - int cpu = smp_processor_id(); - int irq = K_BCM1480_INT_TIMER_0 + cpu; - - /* Reset the timer */ - __raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS, - IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); - - do_IRQ(irq); -} - static inline void dispatch_ip2(void) { unsigned long long mask_h, mask_l; @@ -451,6 +439,7 @@ static inline void dispatch_ip2(void) asmlinkage void plat_irq_dispatch(void) { + unsigned int cpu = smp_processor_id(); unsigned int pending; #ifdef CONFIG_SIBYTE_BCM1480_PROF @@ -467,7 +456,7 @@ asmlinkage void plat_irq_dispatch(void) #endif if (pending & CAUSEF_IP4) - dispatch_ip4(); + do_IRQ(K_BCM1480_INT_TIMER_0 + cpu); #ifdef CONFIG_SMP else if (pending & CAUSEF_IP3) bcm1480_mailbox_interrupt(); diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c index 4df070f2ff5d..834650f371e0 100644 --- a/arch/mips/sni/pcimt.c +++ b/arch/mips/sni/pcimt.c @@ -244,7 +244,7 @@ static void pcimt_hwint1(void) if (pend & IT_EISA) { int irq; /* - * Note: ASIC PCI's builtin interrupt achknowledge feature is + * Note: ASIC PCI's builtin interrupt acknowledge feature is * broken. Using it may result in loss of some or all i8259 * interrupts, so don't use PCIMT_INT_ACKNOWLEDGE ... */ diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c index 1899601e5862..3f23d9fda662 100644 --- a/arch/mips/vr41xx/common/icu.c +++ b/arch/mips/vr41xx/common/icu.c @@ -525,6 +525,7 @@ static inline int set_sysint1_assign(unsigned int irq, unsigned char assign) intassign1 |= (uint16_t)assign << 9; break; default: + spin_unlock_irq(&desc->lock); return -EINVAL; } @@ -592,6 +593,7 @@ static inline int set_sysint2_assign(unsigned int irq, unsigned char assign) intassign3 |= (uint16_t)assign << 12; break; default: + spin_unlock_irq(&desc->lock); return -EINVAL; } diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 4e165342210a..bd87626c1f60 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -107,6 +107,9 @@ endif # No AltiVec instruction when building kernel KBUILD_CFLAGS += $(call cc-option,-mno-altivec) +# No SPE instruction when building kernel +KBUILD_CFLAGS += $(call cc-option,-mno-spe) + # Enable unit-at-a-time mode when possible. It shrinks the # kernel considerably. KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time) diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index 3ef51fb6f107..9c74fdf29eec 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -186,7 +186,9 @@ int btext_initialize(struct device_node *np) pitch = *prop; if (pitch == 1) pitch = 0x1000; - prop = of_get_property(np, "address", NULL); + prop = of_get_property(np, "linux,bootx-addr", NULL); + if (prop == NULL) + prop = of_get_property(np, "address", NULL); if (prop) address = *prop; diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index a7572cf464bd..69a91bd46115 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -251,6 +251,9 @@ syscall_exit_cont: bne- 2f 1: #endif /* CONFIG_44x */ +BEGIN_FTR_SECTION + lwarx r7,0,r1 +END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX) stwcx. r0,0,r1 /* to clear the reservation */ lwz r4,_LINK(r1) lwz r5,_CCR(r1) @@ -717,6 +720,9 @@ restore: mtctr r11 PPC405_ERR77(0,r1) +BEGIN_FTR_SECTION + lwarx r11,0,r1 +END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX) stwcx. r0,0,r1 /* to clear the reservation */ #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 4beb6329dfb7..c0d77723ba11 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -829,7 +829,7 @@ static void register_decrementer_clockevent(int cpu) *dec = decrementer_clockevent; dec->cpumask = cpumask_of_cpu(cpu); - printk(KERN_INFO "clockevent: %s mult[%lx] shift[%d] cpu[%d]\n", + printk(KERN_DEBUG "clockevent: %s mult[%lx] shift[%d] cpu[%d]\n", dec->name, dec->mult, dec->shift, cpu); clockevents_register_device(dec); diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index d9c82d3d6482..c0f5cff77035 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -19,8 +19,6 @@ * */ -#undef DEBUG - #include <linux/signal.h> #include <linux/sched.h> #include <linux/kernel.h> @@ -66,12 +64,6 @@ #include "mmu_decl.h" -#ifdef DEBUG -#define DBG(fmt...) printk(fmt) -#else -#define DBG(fmt...) -#endif - #if PGTABLE_RANGE > USER_VSID_RANGE #warning Limited user VSID range means pagetable space is wasted #endif @@ -175,8 +167,8 @@ void pgtable_cache_init(void) int size = pgtable_cache_size[i]; const char *name = pgtable_cache_name[i]; - DBG("Allocating page table cache %s (#%d) " - "for size: %08x...\n", name, i, size); + pr_debug("Allocating page table cache %s (#%d) " + "for size: %08x...\n", name, i, size); pgtable_cache[i] = kmem_cache_create(name, size, size, SLAB_PANIC, @@ -239,8 +231,8 @@ int __meminit vmemmap_populate(struct page *start_page, if (!p) return -ENOMEM; - printk(KERN_WARNING "vmemmap %08lx allocated at %p, " - "physical %08lx.\n", start, p, __pa(p)); + pr_debug("vmemmap %08lx allocated at %p, physical %08lx.\n", + start, p, __pa(p)); mapped = htab_bolt_mapping(start, start + page_size, __pa(p), mode_rw, mmu_linear_psize, diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c index eafbca52bff9..e2d867ce1c7e 100644 --- a/arch/powerpc/mm/tlb_64.c +++ b/arch/powerpc/mm/tlb_64.c @@ -54,12 +54,10 @@ unsigned long pte_freelist_forced_free; ((PAGE_SIZE - sizeof(struct pte_freelist_batch)) \ / sizeof(pgtable_free_t)) -#ifdef CONFIG_SMP static void pte_free_smp_sync(void *arg) { /* Do nothing, just ensure we sync with all CPUs */ } -#endif /* This is only called when we are critically out of memory * (and fail to get a page in pte_free_tlb). diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c index 66c8ad4cfce6..165981c87786 100644 --- a/arch/powerpc/sysdev/cpm_common.c +++ b/arch/powerpc/sysdev/cpm_common.c @@ -77,8 +77,6 @@ int __init cpm_muram_init(void) int i = 0; int ret = 0; - printk("cpm_muram_init\n"); - spin_lock_init(&cpm_muram_lock); /* initialize the info header */ rh_init(&cpm_muram_info, 1, @@ -193,7 +191,7 @@ void __iomem *cpm_muram_addr(unsigned long offset) EXPORT_SYMBOL(cpm_muram_addr); /** - * cpm_muram_phys - turn a muram virtual address into a DMA address + * cpm_muram_dma - turn a muram virtual address into a DMA address * @offset: virtual address from cpm_muram_addr() to convert */ dma_addr_t cpm_muram_dma(void __iomem *addr) diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index b19bfef2034d..59e77eb63338 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -251,6 +251,9 @@ syscall_exit_cont: bne- 2f 1: #endif /* CONFIG_44x */ +BEGIN_FTR_SECTION + lwarx r7,0,r1 +END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX) stwcx. r0,0,r1 /* to clear the reservation */ lwz r4,_LINK(r1) lwz r5,_CCR(r1) @@ -713,6 +716,9 @@ restore: mtctr r11 PPC405_ERR77(0,r1) +BEGIN_FTR_SECTION + lwarx r11,0,r1 +END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX) stwcx. r0,0,r1 /* to clear the reservation */ #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) diff --git a/arch/um/Makefile b/arch/um/Makefile index 768a5d14b755..31999bc1c8a4 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -168,7 +168,7 @@ ifneq ($(KBUILD_SRC),) $(Q)mkdir -p $(objtree)/include/asm-um $(Q)ln -fsn $(srctree)/include/asm-$(HEADER_ARCH) include/asm-um/arch else - $(Q)cd $(TOPDIR)/include/asm-um && ln -sf ../asm-$(HEADER_ARCH) arch + $(Q)cd $(TOPDIR)/include/asm-um && ln -fsn ../asm-$(SUBARCH) arch endif $(objtree)/$(ARCH_DIR)/include: @@ -180,7 +180,7 @@ $(ARCH_DIR)/include/sysdep: $(objtree)/$(ARCH_DIR)/include ifneq ($(KBUILD_SRC),) $(Q)ln -fsn $(srctree)/$(ARCH_DIR)/include/sysdep-$(SUBARCH) $(ARCH_DIR)/include/sysdep else - $(Q)cd $(ARCH_DIR)/include && ln -sf sysdep-$(SUBARCH) sysdep + $(Q)cd $(ARCH_DIR)/include && ln -fsn sysdep-$(SUBARCH) sysdep endif $(ARCH_DIR)/os: @@ -188,7 +188,7 @@ $(ARCH_DIR)/os: ifneq ($(KBUILD_SRC),) $(Q)ln -fsn $(srctree)/$(ARCH_DIR)/os-$(OS) $(ARCH_DIR)/os else - $(Q)cd $(ARCH_DIR) && ln -sf os-$(OS) os + $(Q)cd $(ARCH_DIR) && ln -fsn os-$(OS) os endif # Generated files diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index 8c01fa81a1ae..73681f14f9fc 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -753,6 +753,7 @@ static struct mc_device net_mc = { .remove = net_remove, }; +#ifdef CONFIG_INET static int uml_inetaddr_event(struct notifier_block *this, unsigned long event, void *ptr) { @@ -789,14 +790,13 @@ struct notifier_block uml_inetaddr_notifier = { .notifier_call = uml_inetaddr_event, }; -static int uml_net_init(void) +static void inet_register(void) { struct list_head *ele; struct uml_net_private *lp; struct in_device *ip; struct in_ifaddr *in; - mconsole_register_dev(&net_mc); register_inetaddr_notifier(¨_inetaddr_notifier); /* Devices may have been opened already, so the uml_inetaddr_notifier @@ -816,7 +816,17 @@ static int uml_net_init(void) } } spin_unlock(&opened_lock); +} +#else +static inline void inet_register(void) +{ +} +#endif +static int uml_net_init(void) +{ + mconsole_register_dev(&net_mc); + inet_register(); return 0; } diff --git a/arch/um/include/user.h b/arch/um/include/user.h index 99033ff28a78..1723fac6f40d 100644 --- a/arch/um/include/user.h +++ b/arch/um/include/user.h @@ -1,11 +1,13 @@ /* - * Copyright (C) 2000 Jeff Dike (jdike@karaya.com) + * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) * Licensed under the GPL */ #ifndef __USER_H__ #define __USER_H__ +#include "uml-config.h" + /* * The usual definition - copied here because the kernel provides its own, * fancier, type-safe, definition. Using that one would require @@ -23,8 +25,17 @@ extern void panic(const char *fmt, ...) __attribute__ ((format (printf, 1, 2))); + +#ifdef UML_CONFIG_PRINTK extern int printk(const char *fmt, ...) __attribute__ ((format (printf, 1, 2))); +#else +static inline int printk(const char *fmt, ...) +{ + return 0; +} +#endif + extern void schedule(void); extern int in_aton(char *str); extern int open_gdb_chan(void); diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c index 70c2d625b070..ba11ccd6a8a3 100644 --- a/arch/um/kernel/irq.c +++ b/arch/um/kernel/irq.c @@ -347,14 +347,15 @@ int um_request_irq(unsigned int irq, int fd, int type, { int err; - err = request_irq(irq, handler, irqflags, devname, dev_id); - if (err) - return err; - - if (fd != -1) + if (fd != -1) { err = activate_fd(irq, fd, type, dev_id); - return err; + if (err) + return err; + } + + return request_irq(irq, handler, irqflags, devname, dev_id); } + EXPORT_SYMBOL(um_request_irq); EXPORT_SYMBOL(reactivate_fd); diff --git a/arch/um/kernel/skas/clone.c b/arch/um/kernel/skas/clone.c index d119f4f7d897..8d07a7acb909 100644 --- a/arch/um/kernel/skas/clone.c +++ b/arch/um/kernel/skas/clone.c @@ -3,7 +3,6 @@ #include <sys/mman.h> #include <sys/time.h> #include <asm/unistd.h> -#include <asm/page.h> #include "as-layout.h" #include "ptrace_user.h" #include "skas.h" diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c index b542a3a021bf..f83462758627 100644 --- a/arch/um/os-Linux/file.c +++ b/arch/um/os-Linux/file.c @@ -496,8 +496,7 @@ int os_rcv_fd(int fd, int *helper_pid_out) n = recvmsg(fd, &msg, 0); if(n < 0) return -errno; - - else if(n != sizeof(iov.iov_len)) + else if(n != iov.iov_len) *helper_pid_out = -1; cmsg = CMSG_FIRSTHDR(&msg); diff --git a/arch/x86/Kconfig.i386 b/arch/x86/Kconfig index 7331efe891a7..1eb59971af5d 100644 --- a/arch/x86/Kconfig.i386 +++ b/arch/x86/Kconfig @@ -1,18 +1,24 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# +# x86 configuration +mainmenu "Linux Kernel Configuration for x86" -mainmenu "Linux Kernel Configuration" +# Select 32 or 64 bit +config 64BIT + bool "64-bit kernel" + default n + help + Say yes to build a 64-bit kernel - formerly known as x86_64 + Say no to build a 32-bit kernel - formerly known as i386 config X86_32 + def_bool !64BIT + +config X86_64 + def_bool 64BIT + +### Arch settings +config X86 bool default y - help - This is Linux's home port. Linux was originally native to the Intel - 386, and runs on all the later x86 processors including the Intel - 486, 586, Pentiums, and various instruction-set-compatible chips by - AMD, Cyrix, and others. config GENERIC_TIME bool @@ -33,7 +39,7 @@ config GENERIC_CLOCKEVENTS config GENERIC_CLOCKEVENTS_BROADCAST bool default y - depends on X86_LOCAL_APIC + depends on X86_64 || (X86_32 && X86_LOCAL_APIC) config LOCKDEP_SUPPORT bool @@ -47,10 +53,6 @@ config SEMAPHORE_SLEEPERS bool default y -config X86 - bool - default y - config MMU bool default y @@ -61,7 +63,7 @@ config ZONE_DMA config QUICKLIST bool - default y + default X86_32 config SBUS bool @@ -91,6 +93,76 @@ config DMI bool default y +config RWSEM_GENERIC_SPINLOCK + def_bool !X86_XADD + +config RWSEM_XCHGADD_ALGORITHM + def_bool X86_XADD + +config ARCH_HAS_ILOG2_U32 + def_bool n + +config ARCH_HAS_ILOG2_U64 + def_bool n + +config GENERIC_CALIBRATE_DELAY + def_bool y + +config GENERIC_TIME_VSYSCALL + bool + default X86_64 + + + + + +config ZONE_DMA32 + bool + default X86_64 + +config ARCH_POPULATES_NODE_MAP + def_bool y + +config AUDIT_ARCH + bool + default X86_64 + +# Use the generic interrupt handling code in kernel/irq/: +config GENERIC_HARDIRQS + bool + default y + +config GENERIC_IRQ_PROBE + bool + default y + +config GENERIC_PENDING_IRQ + bool + depends on GENERIC_HARDIRQS && SMP + default y + +config X86_SMP + bool + depends on X86_32 && SMP && !X86_VOYAGER + default y + +config X86_HT + bool + depends on SMP && !(X86_VISWS || X86_VOYAGER || MK8) + default y + +config X86_BIOS_REBOOT + bool + depends on X86_32 && !(X86_VISWS || X86_VOYAGER) + default y + +config X86_TRAMPOLINE + bool + depends on X86_SMP || (X86_VOYAGER && SMP) + default y + +config KTIME_SCALAR + def_bool X86_32 source "init/Kconfig" menu "Processor type and features" @@ -137,6 +209,7 @@ config X86_PC config X86_ELAN bool "AMD Elan" + depends on X86_32 help Select this for an AMD Elan processor. @@ -146,6 +219,7 @@ config X86_ELAN config X86_VOYAGER bool "Voyager (NCR)" + depends on X86_32 select SMP if !BROKEN help Voyager is an MCA-based 32-way capable SMP architecture proprietary @@ -160,6 +234,7 @@ config X86_NUMAQ bool "NUMAQ (IBM/Sequent)" select SMP select NUMA + depends on X86_32 help This option is used for getting Linux to run on a (IBM/Sequent) NUMA multiquad box. This changes the way that processors are bootstrapped, @@ -169,7 +244,7 @@ config X86_NUMAQ config X86_SUMMIT bool "Summit/EXA (IBM x440)" - depends on SMP + depends on X86_32 && SMP help This option is needed for IBM systems that use the Summit/EXA chipset. In particular, it is needed for the x440. @@ -179,7 +254,7 @@ config X86_SUMMIT config X86_BIGSMP bool "Support for other sub-arch SMP systems with more than 8 CPUs" - depends on SMP + depends on X86_32 && SMP help This option is needed for the systems that have more than 8 CPUs and if the system is not of any sub-arch type above. @@ -188,6 +263,7 @@ config X86_BIGSMP config X86_VISWS bool "SGI 320/540 (Visual Workstation)" + depends on X86_32 help The SGI Visual Workstation series is an IA32-based workstation based on SGI systems chips with some legacy PC hardware attached. @@ -199,6 +275,7 @@ config X86_VISWS config X86_GENERICARCH bool "Generic architecture (Summit, bigsmp, ES7000, default)" + depends on X86_32 help This option compiles in the Summit, bigsmp, ES7000, default subarchitectures. It is intended for a generic binary kernel. @@ -206,18 +283,27 @@ config X86_GENERICARCH config X86_ES7000 bool "Support for Unisys ES7000 IA32 series" - depends on SMP + depends on X86_32 && SMP help Support for Unisys ES7000 systems. Say 'Y' here if this kernel is supposed to run on an IA32-based Unisys ES7000 system. Only choose this option if you have such a system, otherwise you should say N here. +config X86_VSMP + bool "Support for ScaleMP vSMP" + depends on X86_64 && PCI + help + Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is + supposed to run on these EM64T-based machines. Only choose this option + if you have one of these machines. + endchoice config SCHED_NO_NO_OMIT_FRAME_POINTER bool "Single-depth WCHAN output" default y + depends on X86_32 help Calculate simpler /proc/<PID>/wchan values. If this option is disabled then wchan values will recurse back to the @@ -228,7 +314,7 @@ config SCHED_NO_NO_OMIT_FRAME_POINTER config PARAVIRT bool - depends on !(X86_VISWS || X86_VOYAGER) + depends on X86_32 && !(X86_VISWS || X86_VOYAGER) help This changes the kernel so it can modify itself when it is run under a hypervisor, potentially improving performance significantly @@ -237,6 +323,7 @@ config PARAVIRT menuconfig PARAVIRT_GUEST bool "Paravirtualized guest support" + depends on X86_32 help Say Y here to get to see options related to running Linux under various hypervisors. This option alone does not add any kernel code. @@ -264,7 +351,7 @@ endif config ACPI_SRAT bool default y - depends on ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH) + depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH) select ACPI_NUMA config HAVE_ARCH_PARSE_SRAT @@ -275,12 +362,12 @@ config HAVE_ARCH_PARSE_SRAT config X86_SUMMIT_NUMA bool default y - depends on NUMA && (X86_SUMMIT || X86_GENERICARCH) + depends on X86_32 && NUMA && (X86_SUMMIT || X86_GENERICARCH) config X86_CYCLONE_TIMER bool default y - depends on X86_SUMMIT || X86_GENERICARCH + depends on X86_32 && X86_SUMMIT || X86_GENERICARCH config ES7000_CLUSTERED_APIC bool @@ -290,21 +377,89 @@ config ES7000_CLUSTERED_APIC source "arch/x86/Kconfig.cpu" config HPET_TIMER - bool "HPET Timer Support" + bool + prompt "HPET Timer Support" if X86_32 + default X86_64 help - This enables the use of the HPET for the kernel's internal timer. - HPET is the next generation timer replacing legacy 8254s. - You can safely choose Y here. However, HPET will only be - activated if the platform and the BIOS support this feature. - Otherwise the 8254 will be used for timing services. + Use the IA-PC HPET (High Precision Event Timer) to manage + time in preference to the PIT and RTC, if a HPET is + present. + HPET is the next generation timer replacing legacy 8254s. + The HPET provides a stable time base on SMP + systems, unlike the TSC, but it is more expensive to access, + as it is off-chip. You can find the HPET spec at + <http://www.intel.com/hardwaredesign/hpetspec.htm>. - Choose N to continue using the legacy 8254 timer. + You can safely choose Y here. However, HPET will only be + activated if the platform and the BIOS support this feature. + Otherwise the 8254 will be used for timing services. + + Choose N to continue using the legacy 8254 timer. config HPET_EMULATE_RTC bool depends on HPET_TIMER && RTC=y default y +# Mark as embedded because too many people got it wrong. +# The code disables itself when not needed. +config GART_IOMMU + bool "GART IOMMU support" if EMBEDDED + default y + select SWIOTLB + select AGP + depends on X86_64 && PCI + help + Support for full DMA access of devices with 32bit memory access only + on systems with more than 3GB. This is usually needed for USB, + sound, many IDE/SATA chipsets and some other devices. + Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART + based hardware IOMMU and a software bounce buffer based IOMMU used + on Intel systems and as fallback. + The code is only active when needed (enough memory and limited + device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified + too. + +config CALGARY_IOMMU + bool "IBM Calgary IOMMU support" + select SWIOTLB + depends on X86_64 && PCI && EXPERIMENTAL + help + Support for hardware IOMMUs in IBM's xSeries x366 and x460 + systems. Needed to run systems with more than 3GB of memory + properly with 32-bit PCI devices that do not support DAC + (Double Address Cycle). Calgary also supports bus level + isolation, where all DMAs pass through the IOMMU. This + prevents them from going anywhere except their intended + destination. This catches hard-to-find kernel bugs and + mis-behaving drivers and devices that do not use the DMA-API + properly to set up their DMA buffers. The IOMMU can be + turned off at boot time with the iommu=off parameter. + Normally the kernel will make the right choice by itself. + If unsure, say Y. + +config CALGARY_IOMMU_ENABLED_BY_DEFAULT + bool "Should Calgary be enabled by default?" + default y + depends on CALGARY_IOMMU + help + Should Calgary be enabled by default? if you choose 'y', Calgary + will be used (if it exists). If you choose 'n', Calgary will not be + used even if it exists. If you choose 'n' and would like to use + Calgary anyway, pass 'iommu=calgary' on the kernel command line. + If unsure, say Y. + +# need this always selected by IOMMU for the VIA workaround +config SWIOTLB + bool + help + Support for software bounce buffers used on x86-64 systems + which don't have a hardware IOMMU (e.g. the current generation + of Intel's x86-64 CPUs). Using this PCI devices which can only + access 32-bits of memory can be used on systems with more than + 3 GB of memory. If unsure, say Y. + + config NR_CPUS int "Maximum number of CPUs (2-255)" range 2 255 @@ -321,7 +476,7 @@ config NR_CPUS config SCHED_SMT bool "SMT (Hyperthreading) scheduler support" - depends on X86_HT + depends on (X86_64 && SMP) || (X86_32 && X86_HT) help SMT scheduler support improves the CPU scheduler's decision making when dealing with Intel Pentium 4 chips with HyperThreading at a @@ -330,7 +485,7 @@ config SCHED_SMT config SCHED_MC bool "Multi-core scheduler support" - depends on X86_HT + depends on (X86_64 && SMP) || (X86_32 && X86_HT) default y help Multi-core scheduler support improves the CPU scheduler's decision @@ -341,7 +496,7 @@ source "kernel/Kconfig.preempt" config X86_UP_APIC bool "Local APIC support on uniprocessors" - depends on !SMP && !(X86_VISWS || X86_VOYAGER || X86_GENERICARCH) + depends on X86_32 && !SMP && !(X86_VISWS || X86_VOYAGER || X86_GENERICARCH) help A local APIC (Advanced Programmable Interrupt Controller) is an integrated interrupt controller in the CPU. If you have a single-CPU @@ -366,17 +521,17 @@ config X86_UP_IOAPIC config X86_LOCAL_APIC bool - depends on X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH + depends on X86_64 || (X86_32 && (X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH)) default y config X86_IO_APIC bool - depends on X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH + depends on X86_64 || (X86_32 && (X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH)) default y config X86_VISWS_APIC bool - depends on X86_VISWS + depends on X86_32 && X86_VISWS default y config X86_MCE @@ -396,9 +551,25 @@ config X86_MCE to disable it. MCE support simply ignores non-MCE processors like the 386 and 486, so nearly everyone can say Y here. +config X86_MCE_INTEL + bool "Intel MCE features" + depends on X86_64 && X86_MCE && X86_LOCAL_APIC + default y + help + Additional support for intel specific MCE features such as + the thermal monitor. + +config X86_MCE_AMD + bool "AMD MCE features" + depends on X86_64 && X86_MCE && X86_LOCAL_APIC + default y + help + Additional support for AMD specific MCE features such as + the DRAM Error Threshold. + config X86_MCE_NONFATAL tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4" - depends on X86_MCE + depends on X86_32 && X86_MCE help Enabling this feature starts a timer that triggers every 5 seconds which will look at the machine check registers to see if anything happened. @@ -411,14 +582,15 @@ config X86_MCE_NONFATAL config X86_MCE_P4THERMAL bool "check for P4 thermal throttling interrupt." - depends on X86_MCE && (X86_UP_APIC || SMP) && !X86_VISWS + depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP) && !X86_VISWS help Enabling this feature will cause a message to be printed when the P4 enters thermal throttling. config VM86 - default y bool "Enable VM86 support" if EMBEDDED + default y + depends on X86_32 help This option is required by programs like DOSEMU to run 16-bit legacy code on X86 processors. It also may be needed by software like @@ -427,6 +599,7 @@ config VM86 config TOSHIBA tristate "Toshiba Laptop support" + depends on X86_32 ---help--- This adds a driver to safely access the System Management Mode of the CPU on Toshiba portables with a genuine Toshiba BIOS. It does @@ -442,6 +615,7 @@ config TOSHIBA config I8K tristate "Dell laptop support" + depends on X86_32 ---help--- This adds a driver to safely access the System Management Mode of the CPU on the Dell Inspiron 8000. The System Management Mode @@ -462,7 +636,7 @@ config I8K config X86_REBOOTFIXUPS bool "Enable X86 board specific fixups for reboot" - depends on X86 + depends on X86_32 && X86 default n ---help--- This enables chipset and/or board specific fixups to be done @@ -517,12 +691,11 @@ config X86_CPUID with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to /dev/cpu/31/cpuid. -source "drivers/firmware/Kconfig" - choice prompt "High Memory Support" default HIGHMEM4G if !X86_NUMAQ default HIGHMEM64G if X86_NUMAQ + depends on X86_32 config NOHIGHMEM bool "off" @@ -582,6 +755,7 @@ choice depends on EXPERIMENTAL prompt "Memory split" if EMBEDDED default VMSPLIT_3G + depends on X86_32 help Select the desired split between kernel and user memory. @@ -619,16 +793,17 @@ config PAGE_OFFSET default 0x78000000 if VMSPLIT_2G_OPT default 0x40000000 if VMSPLIT_1G default 0xC0000000 + depends on X86_32 config HIGHMEM bool - depends on HIGHMEM64G || HIGHMEM4G + depends on X86_32 && (HIGHMEM64G || HIGHMEM4G) default y config X86_PAE bool "PAE (Physical Address Extension) Support" default n - depends on !HIGHMEM4G + depends on X86_32 && !HIGHMEM4G select RESOURCES_64BIT help PAE is required for NX support, and furthermore enables @@ -639,46 +814,82 @@ config X86_PAE # Common NUMA Features config NUMA bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)" - depends on SMP && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL + depends on SMP + depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL) default n if X86_PC default y if (X86_NUMAQ || X86_SUMMIT) help - NUMA support for i386. This is currently highly experimental - and should be only used for kernel development. It might also - cause boot failures. + Enable NUMA (Non Uniform Memory Access) support. + The kernel will try to allocate memory used by a CPU on the + local memory controller of the CPU and add some more + NUMA awareness to the kernel. + + For i386 this is currently highly experimental and should be only + used for kernel development. It might also cause boot failures. + For x86_64 this is recommended on all multiprocessor Opteron systems. + If the system is EM64T, you should say N unless your system is + EM64T NUMA. comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI" - depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI) + depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI) + +config K8_NUMA + bool "Old style AMD Opteron NUMA detection" + depends on X86_64 && NUMA && PCI + default y + help + Enable K8 NUMA node topology detection. You should say Y here if + you have a multi processor AMD K8 system. This uses an old + method to read the NUMA configuration directly from the builtin + Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA + instead, which also takes priority if both are compiled in. + +config X86_64_ACPI_NUMA + bool "ACPI NUMA detection" + depends on X86_64 && NUMA && ACPI && PCI + select ACPI_NUMA + default y + help + Enable ACPI SRAT based node topology detection. + +config NUMA_EMU + bool "NUMA emulation" + depends on X86_64 && NUMA + help + Enable NUMA emulation. A flat machine will be split + into virtual nodes when booted with "numa=fake=N", where N is the + number of nodes. This is only useful for debugging. config NODES_SHIFT int + default "6" if X86_64 default "4" if X86_NUMAQ default "3" depends on NEED_MULTIPLE_NODES config HAVE_ARCH_BOOTMEM_NODE bool - depends on NUMA + depends on X86_32 && NUMA default y config ARCH_HAVE_MEMORY_PRESENT bool - depends on DISCONTIGMEM + depends on X86_32 && DISCONTIGMEM default y config NEED_NODE_MEMMAP_SIZE bool - depends on DISCONTIGMEM || SPARSEMEM + depends on X86_32 && (DISCONTIGMEM || SPARSEMEM) default y config HAVE_ARCH_ALLOC_REMAP bool - depends on NUMA + depends on X86_32 && NUMA default y config ARCH_FLATMEM_ENABLE def_bool y - depends on (ARCH_SELECT_MEMORY_MODEL && X86_PC) + depends on (X86_32 && ARCH_SELECT_MEMORY_MODEL && X86_PC) || (X86_64 && !NUMA) config ARCH_DISCONTIGMEM_ENABLE def_bool y @@ -690,21 +901,23 @@ config ARCH_DISCONTIGMEM_DEFAULT config ARCH_SPARSEMEM_ENABLE def_bool y - depends on (NUMA || (X86_PC && EXPERIMENTAL)) - select SPARSEMEM_STATIC + depends on NUMA || (EXPERIMENTAL && (X86_PC || X86_64)) + select SPARSEMEM_STATIC if X86_32 + select SPARSEMEM_VMEMMAP_ENABLE if X86_64 config ARCH_SELECT_MEMORY_MODEL def_bool y - depends on ARCH_SPARSEMEM_ENABLE + depends on X86_32 && ARCH_SPARSEMEM_ENABLE -config ARCH_POPULATES_NODE_MAP - def_bool y +config ARCH_MEMORY_PROBE + def_bool X86_64 + depends on MEMORY_HOTPLUG source "mm/Kconfig" config HIGHPTE bool "Allocate 3rd-level pagetables from highmem" - depends on HIGHMEM4G || HIGHMEM64G + depends on X86_32 && (HIGHMEM4G || HIGHMEM64G) help The VM uses one page table entry for each page of physical memory. For systems with a lot of RAM, this can be wasteful of precious @@ -712,7 +925,8 @@ config HIGHPTE entries in high memory. config MATH_EMULATION - bool "Math emulation" + bool + prompt "Math emulation" if X86_32 ---help--- Linux can emulate a math coprocessor (used for floating point operations) if you don't have one. 486DX and Pentium processors have @@ -772,7 +986,7 @@ config MTRR config EFI bool "Boot from EFI support" - depends on ACPI + depends on X86_32 && ACPI default n ---help--- This enables the kernel to boot on EFI platforms using @@ -789,18 +1003,18 @@ config EFI kernel should continue to boot on existing non-EFI platforms. config IRQBALANCE - bool "Enable kernel irq balancing" - depends on SMP && X86_IO_APIC + bool "Enable kernel irq balancing" + depends on X86_32 && SMP && X86_IO_APIC default y help - The default yes will allow the kernel to do irq load balancing. + The default yes will allow the kernel to do irq load balancing. Saying no will keep the kernel from doing irq load balancing. # turning this on wastes a bunch of space. # Summit needs it only when NUMA is on config BOOT_IOREMAP bool - depends on (((X86_SUMMIT || X86_GENERICARCH) && NUMA) || (X86 && EFI)) + depends on X86_32 && (((X86_SUMMIT || X86_GENERICARCH) && NUMA) || (X86 && EFI)) default y config SECCOMP @@ -820,6 +1034,30 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. +config CC_STACKPROTECTOR + bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" + depends on X86_64 && EXPERIMENTAL + help + This option turns on the -fstack-protector GCC feature. This + feature puts, at the beginning of critical functions, a canary + value on the stack just before the return address, and validates + the value just before actually returning. Stack based buffer + overflows (that need to overwrite this return address) now also + overwrite the canary, which gets detected and the attack is then + neutralized via a kernel panic. + + This feature requires gcc version 4.2 or above, or a distribution + gcc with the feature backported. Older versions are automatically + detected and for those versions, this configuration option is ignored. + +config CC_STACKPROTECTOR_ALL + bool "Use stack-protector for all functions" + depends on CC_STACKPROTECTOR + help + Normally, GCC only inserts the canary value protection for + functions that use large-ish on-stack buffers. By enabling + this option, GCC will be asked to do this for ALL functions. + source kernel/Kconfig.hz config KEXEC @@ -841,7 +1079,7 @@ config KEXEC config CRASH_DUMP bool "kernel crash dumps (EXPERIMENTAL)" depends on EXPERIMENTAL - depends on HIGHMEM + depends on X86_64 || (X86_32 && HIGHMEM) help Generate crash dump after being started by kexec. This should be normally only set in special crash dump kernels @@ -856,6 +1094,7 @@ config CRASH_DUMP config PHYSICAL_START hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) default "0x1000000" if X86_NUMAQ + default "0x200000" if X86_64 default "0x100000" help This gives the physical address where the kernel is loaded. @@ -908,25 +1147,31 @@ config RELOCATABLE must live at a different physical address than the primary kernel. + Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address + it has been loaded at and the compile time physical address + (CONFIG_PHYSICAL_START) is ignored. + config PHYSICAL_ALIGN - hex "Alignment value to which kernel should be aligned" - default "0x100000" + hex + prompt "Alignment value to which kernel should be aligned" if X86_32 + default "0x100000" if X86_32 + default "0x200000" if X86_64 range 0x2000 0x400000 help This value puts the alignment restrictions on physical address - where kernel is loaded and run from. Kernel is compiled for an - address which meets above alignment restriction. - - If bootloader loads the kernel at a non-aligned address and - CONFIG_RELOCATABLE is set, kernel will move itself to nearest - address aligned to above value and run from there. - - If bootloader loads the kernel at a non-aligned address and - CONFIG_RELOCATABLE is not set, kernel will ignore the run time - load address and decompress itself to the address it has been - compiled for and run from there. The address for which kernel is - compiled already meets above alignment restrictions. Hence the - end result is that kernel runs from a physical address meeting + where kernel is loaded and run from. Kernel is compiled for an + address which meets above alignment restriction. + + If bootloader loads the kernel at a non-aligned address and + CONFIG_RELOCATABLE is set, kernel will move itself to nearest + address aligned to above value and run from there. + + If bootloader loads the kernel at a non-aligned address and + CONFIG_RELOCATABLE is not set, kernel will ignore the run time + load address and decompress itself to the address it has been + compiled for and run from there. The address for which kernel is + compiled already meets above alignment restrictions. Hence the + end result is that kernel runs from a physical address meeting above alignment restrictions. Don't change this unless you know what you are doing. @@ -938,10 +1183,13 @@ config HOTPLUG_CPU Say Y here to experiment with turning CPUs off and on, and to enable suspend on SMP systems. CPUs can be controlled through /sys/devices/system/cpu. + Say N if you want to disable CPU hotplug and don't need to + suspend. config COMPAT_VDSO bool "Compat VDSO support" default y + depends on X86_32 help Map the VDSO to the predictable old-style address too. ---help--- @@ -955,18 +1203,35 @@ endmenu config ARCH_ENABLE_MEMORY_HOTPLUG def_bool y - depends on HIGHMEM + depends on X86_64 || (X86_32 && HIGHMEM) + +config MEMORY_HOTPLUG_RESERVE + def_bool X86_64 + depends on (MEMORY_HOTPLUG && DISCONTIGMEM) + +config HAVE_ARCH_EARLY_PFN_TO_NID + def_bool X86_64 + depends on NUMA -menu "Power management options (ACPI, APM)" +config OUT_OF_LINE_PFN_TO_PAGE + def_bool X86_64 + depends on DISCONTIGMEM + +menu "Power management options" depends on !X86_VOYAGER -source kernel/power/Kconfig +config ARCH_HIBERNATION_HEADER + bool + depends on X86_64 && HIBERNATION + default y + +source "kernel/power/Kconfig" source "drivers/acpi/Kconfig" menuconfig APM tristate "APM (Advanced Power Management) BIOS support" - depends on PM_SLEEP && !X86_VISWS + depends on X86_32 && PM_SLEEP && !X86_VISWS ---help--- APM is a BIOS specification for saving power using several different techniques. This is mostly useful for battery powered laptops with @@ -1092,13 +1357,14 @@ config APM_REAL_MODE_POWER_OFF endif # APM -source "arch/x86/kernel/cpu/cpufreq/Kconfig_32" +source "arch/x86/kernel/cpu/cpufreq/Kconfig" source "drivers/cpuidle/Kconfig" endmenu -menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)" + +menu "Bus options (PCI etc.)" config PCI bool "PCI support" if !X86_VISWS @@ -1118,7 +1384,7 @@ config PCI choice prompt "PCI access mode" - depends on PCI && !X86_VISWS + depends on X86_32 && PCI && !X86_VISWS default PCI_GOANY ---help--- On PCI systems, the BIOS can be used to detect the PCI devices and @@ -1151,17 +1417,18 @@ endchoice config PCI_BIOS bool - depends on !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY) + depends on X86_32 && !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY) default y +# x86-64 doesn't support PCI BIOS access from long mode so always go direct. config PCI_DIRECT bool - depends on PCI && ((PCI_GODIRECT || PCI_GOANY) || X86_VISWS) + depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY) || X86_VISWS) default y config PCI_MMCONFIG bool - depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY) + depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY) default y config PCI_DOMAINS @@ -1169,14 +1436,52 @@ config PCI_DOMAINS depends on PCI default y +config PCI_MMCONFIG + bool "Support mmconfig PCI config space access" + depends on X86_64 && PCI && ACPI + +config DMAR + bool "Support for DMA Remapping Devices (EXPERIMENTAL)" + depends on X86_64 && PCI_MSI && ACPI && EXPERIMENTAL + help + DMA remapping (DMAR) devices support enables independent address + translations for Direct Memory Access (DMA) from devices. + These DMA remapping devices are reported via ACPI tables + and include PCI device scope covered by these DMA + remapping devices. + +config DMAR_GFX_WA + bool "Support for Graphics workaround" + depends on DMAR + default y + help + Current Graphics drivers tend to use physical address + for DMA and avoid using DMA APIs. Setting this config + option permits the IOMMU driver to set a unity map for + all the OS-visible memory. Hence the driver can continue + to use physical addresses for DMA. + +config DMAR_FLOPPY_WA + bool + depends on DMAR + default y + help + Floppy disk drivers are know to bypass DMA API calls + thereby failing to work when IOMMU is enabled. This + workaround will setup a 1:1 mapping for the first + 16M to make floppy (an ISA device) work. + source "drivers/pci/pcie/Kconfig" source "drivers/pci/Kconfig" +# x86_64 have no ISA slots, but do have ISA-style DMA. config ISA_DMA_API bool default y +if X86_32 + config ISA bool "ISA support" depends on !(X86_VOYAGER || X86_VISWS) @@ -1248,9 +1553,11 @@ config GEODE_MFGPT_TIMER MFGPTs have a better resolution and max interval than the generic PIT, and are suitable for use as high-res timers. +endif # X86_32 + config K8_NB def_bool y - depends on AGP_AMD64 + depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA))) source "drivers/pcmcia/Kconfig" @@ -1258,16 +1565,48 @@ source "drivers/pci/hotplug/Kconfig" endmenu -menu "Executable file formats" + +menu "Executable file formats / Emulations" source "fs/Kconfig.binfmt" +config IA32_EMULATION + bool "IA32 Emulation" + depends on X86_64 + help + Include code to run 32-bit programs under a 64-bit kernel. You should + likely turn this on, unless you're 100% sure that you don't have any + 32-bit programs left. + +config IA32_AOUT + tristate "IA32 a.out support" + depends on IA32_EMULATION + help + Support old a.out binaries in the 32bit emulation. + +config COMPAT + bool + depends on IA32_EMULATION + default y + +config COMPAT_FOR_U64_ALIGNMENT + def_bool COMPAT + depends on X86_64 + +config SYSVIPC_COMPAT + bool + depends on X86_64 && COMPAT && SYSVIPC + default y + endmenu + source "net/Kconfig" source "drivers/Kconfig" +source "drivers/firmware/Kconfig" + source "fs/Kconfig" source "kernel/Kconfig.instrumentation" @@ -1279,43 +1618,3 @@ source "security/Kconfig" source "crypto/Kconfig" source "lib/Kconfig" - -# -# Use the generic interrupt handling code in kernel/irq/: -# -config GENERIC_HARDIRQS - bool - default y - -config GENERIC_IRQ_PROBE - bool - default y - -config GENERIC_PENDING_IRQ - bool - depends on GENERIC_HARDIRQS && SMP - default y - -config X86_SMP - bool - depends on SMP && !X86_VOYAGER - default y - -config X86_HT - bool - depends on SMP && !(X86_VISWS || X86_VOYAGER) - default y - -config X86_BIOS_REBOOT - bool - depends on !(X86_VISWS || X86_VOYAGER) - default y - -config X86_TRAMPOLINE - bool - depends on X86_SMP || (X86_VOYAGER && SMP) - default y - -config KTIME_SCALAR - bool - default y diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 0e2adadf5905..c30162202dc4 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -3,11 +3,12 @@ if !X86_ELAN choice prompt "Processor family" - default M686 + default M686 if X86_32 + default GENERIC_CPU if X86_64 config M386 bool "386" - depends on !UML + depends on X86_32 && !UML ---help--- This is the processor type of your CPU. This information is used for optimizing purposes. In order to compile a kernel that can run on @@ -49,6 +50,7 @@ config M386 config M486 bool "486" + depends on X86_32 help Select this for a 486 series processor, either Intel or one of the compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX, @@ -57,6 +59,7 @@ config M486 config M586 bool "586/K5/5x86/6x86/6x86MX" + depends on X86_32 help Select this for an 586 or 686 series processor such as the AMD K5, the Cyrix 5x86, 6x86 and 6x86MX. This choice does not @@ -64,18 +67,21 @@ config M586 config M586TSC bool "Pentium-Classic" + depends on X86_32 help Select this for a Pentium Classic processor with the RDTSC (Read Time Stamp Counter) instruction for benchmarking. config M586MMX bool "Pentium-MMX" + depends on X86_32 help Select this for a Pentium with the MMX graphics/multimedia extended instructions. config M686 bool "Pentium-Pro" + depends on X86_32 help Select this for Intel Pentium Pro chips. This enables the use of Pentium Pro extended instructions, and disables the init-time guard @@ -83,6 +89,7 @@ config M686 config MPENTIUMII bool "Pentium-II/Celeron(pre-Coppermine)" + depends on X86_32 help Select this for Intel chips based on the Pentium-II and pre-Coppermine Celeron core. This option enables an unaligned @@ -92,6 +99,7 @@ config MPENTIUMII config MPENTIUMIII bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon" + depends on X86_32 help Select this for Intel chips based on the Pentium-III and Celeron-Coppermine core. This option enables use of some @@ -100,19 +108,14 @@ config MPENTIUMIII config MPENTIUMM bool "Pentium M" + depends on X86_32 help Select this for Intel Pentium M (not Pentium-4 M) notebook chips. -config MCORE2 - bool "Core 2/newer Xeon" - help - Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx) - CPUs. You can distinguish newer from older Xeons by the CPU family - in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo) - config MPENTIUM4 bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon" + depends on X86_32 help Select this for Intel Pentium 4 chips. This includes the Pentium 4, Pentium D, P4-based Celeron and Xeon, and @@ -148,6 +151,7 @@ config MPENTIUM4 config MK6 bool "K6/K6-II/K6-III" + depends on X86_32 help Select this for an AMD K6-family processor. Enables use of some extended instructions, and passes appropriate optimization @@ -155,6 +159,7 @@ config MK6 config MK7 bool "Athlon/Duron/K7" + depends on X86_32 help Select this for an AMD Athlon K7-family processor. Enables use of some extended instructions, and passes appropriate optimization @@ -169,6 +174,7 @@ config MK8 config MCRUSOE bool "Crusoe" + depends on X86_32 help Select this for a Transmeta Crusoe processor. Treats the processor like a 586 with TSC, and sets some GCC optimization flags (like a @@ -176,11 +182,13 @@ config MCRUSOE config MEFFICEON bool "Efficeon" + depends on X86_32 help Select this for a Transmeta Efficeon processor. config MWINCHIPC6 bool "Winchip-C6" + depends on X86_32 help Select this for an IDT Winchip C6 chip. Linux and GCC treat this chip as a 586TSC with some extended instructions @@ -188,6 +196,7 @@ config MWINCHIPC6 config MWINCHIP2 bool "Winchip-2" + depends on X86_32 help Select this for an IDT Winchip-2. Linux and GCC treat this chip as a 586TSC with some extended instructions @@ -195,6 +204,7 @@ config MWINCHIP2 config MWINCHIP3D bool "Winchip-2A/Winchip-3" + depends on X86_32 help Select this for an IDT Winchip-2A or 3. Linux and GCC treat this chip as a 586TSC with some extended instructions @@ -204,16 +214,19 @@ config MWINCHIP3D config MGEODEGX1 bool "GeodeGX1" + depends on X86_32 help Select this for a Geode GX1 (Cyrix MediaGX) chip. config MGEODE_LX bool "Geode GX/LX" + depends on X86_32 help Select this for AMD Geode GX and LX processors. config MCYRIXIII bool "CyrixIII/VIA-C3" + depends on X86_32 help Select this for a Cyrix III or C3 chip. Presently Linux and GCC treat this chip as a generic 586. Whilst the CPU is 686 class, @@ -225,6 +238,7 @@ config MCYRIXIII config MVIAC3_2 bool "VIA C3-2 (Nehemiah)" + depends on X86_32 help Select this for a VIA C3 "Nehemiah". Selecting this enables usage of SSE and tells gcc to treat the CPU as a 686. @@ -232,15 +246,42 @@ config MVIAC3_2 config MVIAC7 bool "VIA C7" + depends on X86_32 help Select this for a VIA C7. Selecting this uses the correct cache shift and tells gcc to treat the CPU as a 686. +config MPSC + bool "Intel P4 / older Netburst based Xeon" + depends on X86_64 + help + Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey + Xeon CPUs with Intel 64bit which is compatible with x86-64. + Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the + Netburst core and shouldn't use this option. You can distinguish them + using the cpu family field + in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one. + +config MCORE2 + bool "Core 2/newer Xeon" + help + Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx) + CPUs. You can distinguish newer from older Xeons by the CPU family + in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo) + +config GENERIC_CPU + bool "Generic-x86-64" + depends on X86_64 + help + Generic x86-64 CPU. + Run equally well on all x86-64 CPUs. + endchoice config X86_GENERIC - bool "Generic x86 support" - help + bool "Generic x86 support" + depends on X86_32 + help Instead of just including optimizations for the selected x86 variant (e.g. PII, Crusoe or Athlon), include some more generic optimizations as well. This will make the kernel @@ -253,44 +294,31 @@ endif # # Define implied options from the CPU selection here -# +config X86_L1_CACHE_BYTES + int + default "128" if GENERIC_CPU || MPSC + default "64" if MK8 || MCORE2 + depends on X86_64 + +config X86_INTERNODE_CACHE_BYTES + int + default "4096" if X86_VSMP + default X86_L1_CACHE_BYTES if !X86_VSMP + depends on X86_64 + config X86_CMPXCHG - bool - depends on !M386 - default y + def_bool X86_64 || (X86_32 && !M386) config X86_L1_CACHE_SHIFT int - default "7" if MPENTIUM4 || X86_GENERIC + default "7" if MPENTIUM4 || X86_GENERIC || GENERIC_CPU || MPSC default "4" if X86_ELAN || M486 || M386 || MGEODEGX1 default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7 config X86_XADD bool - depends on !M386 - default y - -config RWSEM_GENERIC_SPINLOCK - bool - depends on !X86_XADD - default y - -config RWSEM_XCHGADD_ALGORITHM - bool - depends on X86_XADD - default y - -config ARCH_HAS_ILOG2_U32 - bool - default n - -config ARCH_HAS_ILOG2_U64 - bool - default n - -config GENERIC_CALIBRATE_DELAY - bool + depends on X86_32 && !M386 default y config X86_PPRO_FENCE @@ -305,22 +333,22 @@ config X86_F00F_BUG config X86_WP_WORKS_OK bool - depends on !M386 + depends on X86_32 && !M386 default y config X86_INVLPG bool - depends on !M386 + depends on X86_32 && !M386 default y config X86_BSWAP bool - depends on !M386 + depends on X86_32 && !M386 default y config X86_POPAD_OK bool - depends on !M386 + depends on X86_32 && !M386 default y config X86_ALIGNMENT_16 @@ -330,7 +358,7 @@ config X86_ALIGNMENT_16 config X86_GOOD_APIC bool - depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7 + depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7 || X86_64 default y config X86_INTEL_USERCOPY @@ -355,7 +383,7 @@ config X86_OOSTORE config X86_TSC bool - depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ + depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64 default y # this should be set for all -march=.. options where the compiler @@ -367,6 +395,7 @@ config X86_CMOV config X86_MINIMUM_CPU_FAMILY int - default "4" if X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK + default "64" if X86_64 + default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK) default "3" diff --git a/arch/x86/Kconfig.x86_64 b/arch/x86/Kconfig.x86_64 deleted file mode 100644 index cc468ea61240..000000000000 --- a/arch/x86/Kconfig.x86_64 +++ /dev/null @@ -1,839 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# -# Note: ISA is disabled and will hopefully never be enabled. -# If you managed to buy an ISA x86-64 box you'll have to fix all the -# ISA drivers you need yourself. -# - -mainmenu "Linux Kernel Configuration" - -config X86_64 - bool - default y - help - Port to the x86-64 architecture. x86-64 is a 64-bit extension to the - classical 32-bit x86 architecture. For details see - <http://www.x86-64.org/>. - -config 64BIT - def_bool y - -config X86 - bool - default y - -config GENERIC_TIME - bool - default y - -config GENERIC_TIME_VSYSCALL - bool - default y - -config GENERIC_CMOS_UPDATE - bool - default y - -config CLOCKSOURCE_WATCHDOG - bool - default y - -config GENERIC_CLOCKEVENTS - bool - default y - -config GENERIC_CLOCKEVENTS_BROADCAST - bool - default y - -config ZONE_DMA32 - bool - default y - -config LOCKDEP_SUPPORT - bool - default y - -config STACKTRACE_SUPPORT - bool - default y - -config SEMAPHORE_SLEEPERS - bool - default y - -config MMU - bool - default y - -config ZONE_DMA - bool - default y - -config ISA - bool - -config SBUS - bool - -config RWSEM_GENERIC_SPINLOCK - bool - default y - -config RWSEM_XCHGADD_ALGORITHM - bool - -config GENERIC_HWEIGHT - bool - default y - -config GENERIC_CALIBRATE_DELAY - bool - default y - -config X86_CMPXCHG - bool - default y - -config GENERIC_ISA_DMA - bool - default y - -config GENERIC_IOMAP - bool - default y - -config ARCH_MAY_HAVE_PC_FDC - bool - default y - -config ARCH_POPULATES_NODE_MAP - def_bool y - -config DMI - bool - default y - -config AUDIT_ARCH - bool - default y - -config GENERIC_BUG - bool - default y - depends on BUG - -config ARCH_HAS_ILOG2_U32 - bool - default n - -config ARCH_HAS_ILOG2_U64 - bool - default n - -source "init/Kconfig" - - -menu "Processor type and features" - -source "kernel/time/Kconfig" - -choice - prompt "Subarchitecture Type" - default X86_PC - -config X86_PC - bool "PC-compatible" - help - Choose this option if your computer is a standard PC or compatible. - -config X86_VSMP - bool "Support for ScaleMP vSMP" - depends on PCI - help - Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is - supposed to run on these EM64T-based machines. Only choose this option - if you have one of these machines. - -endchoice - -choice - prompt "Processor family" - default GENERIC_CPU - -config MK8 - bool "AMD-Opteron/Athlon64" - help - Optimize for AMD Opteron/Athlon64/Hammer/K8 CPUs. - -config MPSC - bool "Intel P4 / older Netburst based Xeon" - help - Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey - Xeon CPUs with Intel 64bit which is compatible with x86-64. - Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the - Netburst core and shouldn't use this option. You can distinguish them - using the cpu family field - in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one. - -config MCORE2 - bool "Intel Core2 / newer Xeon" - help - Optimize for Intel Core2 and newer Xeons (51xx) - You can distinguish the newer Xeons from the older ones using - the cpu family field in /proc/cpuinfo. 15 is an older Xeon - (use CONFIG_MPSC then), 6 is a newer one. - -config GENERIC_CPU - bool "Generic-x86-64" - help - Generic x86-64 CPU. - Run equally well on all x86-64 CPUs. - -endchoice - -# -# Define implied options from the CPU selection here -# -config X86_L1_CACHE_BYTES - int - default "128" if GENERIC_CPU || MPSC - default "64" if MK8 || MCORE2 - -config X86_L1_CACHE_SHIFT - int - default "7" if GENERIC_CPU || MPSC - default "6" if MK8 || MCORE2 - -config X86_INTERNODE_CACHE_BYTES - int - default "4096" if X86_VSMP - default X86_L1_CACHE_BYTES if !X86_VSMP - -config X86_TSC - bool - default y - -config X86_GOOD_APIC - bool - default y - -config MICROCODE - tristate "/dev/cpu/microcode - Intel CPU microcode support" - select FW_LOADER - ---help--- - If you say Y here the 'File systems' section, you will be - able to update the microcode on Intel processors. You will - obviously need the actual microcode binary data itself which is - not shipped with the Linux kernel. - - For latest news and information on obtaining all the required - ingredients for this driver, check: - <http://www.urbanmyth.org/microcode/>. - - To compile this driver as a module, choose M here: the - module will be called microcode. - If you use modprobe or kmod you may also want to add the line - 'alias char-major-10-184 microcode' to your /etc/modules.conf file. - -config MICROCODE_OLD_INTERFACE - bool - depends on MICROCODE - default y - -config X86_MSR - tristate "/dev/cpu/*/msr - Model-specific register support" - help - This device gives privileged processes access to the x86 - Model-Specific Registers (MSRs). It is a character device with - major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr. - MSR accesses are directed to a specific CPU on multi-processor - systems. - -config X86_CPUID - tristate "/dev/cpu/*/cpuid - CPU information support" - help - This device gives processes access to the x86 CPUID instruction to - be executed on a specific processor. It is a character device - with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to - /dev/cpu/31/cpuid. - -config X86_HT - bool - depends on SMP && !MK8 - default y - -config MATH_EMULATION - bool - -config MCA - bool - -config EISA - bool - -config X86_IO_APIC - bool - default y - -config X86_LOCAL_APIC - bool - default y - -config MTRR - bool "MTRR (Memory Type Range Register) support" - ---help--- - On Intel P6 family processors (Pentium Pro, Pentium II and later) - the Memory Type Range Registers (MTRRs) may be used to control - processor access to memory ranges. This is most useful if you have - a video (VGA) card on a PCI or AGP bus. Enabling write-combining - allows bus write transfers to be combined into a larger transfer - before bursting over the PCI/AGP bus. This can increase performance - of image write operations 2.5 times or more. Saying Y here creates a - /proc/mtrr file which may be used to manipulate your processor's - MTRRs. Typically the X server should use this. - - This code has a reasonably generic interface so that similar - control registers on other processors can be easily supported - as well. - - Saying Y here also fixes a problem with buggy SMP BIOSes which only - set the MTRRs for the boot CPU and not for the secondary CPUs. This - can lead to all sorts of problems, so it's good to say Y here. - - Just say Y here, all x86-64 machines support MTRRs. - - See <file:Documentation/mtrr.txt> for more information. - -config SMP - bool "Symmetric multi-processing support" - ---help--- - This enables support for systems with more than one CPU. If you have - a system with only one CPU, like most personal computers, say N. If - you have a system with more than one CPU, say Y. - - If you say N here, the kernel will run on single and multiprocessor - machines, but will use only one CPU of a multiprocessor machine. If - you say Y here, the kernel will run on many, but not all, - singleprocessor machines. On a singleprocessor machine, the kernel - will run faster if you say N here. - - If you don't know what to do here, say N. - -config SCHED_SMT - bool "SMT (Hyperthreading) scheduler support" - depends on SMP - default n - help - SMT scheduler support improves the CPU scheduler's decision making - when dealing with Intel Pentium 4 chips with HyperThreading at a - cost of slightly increased overhead in some places. If unsure say - N here. - -config SCHED_MC - bool "Multi-core scheduler support" - depends on SMP - default y - help - Multi-core scheduler support improves the CPU scheduler's decision - making when dealing with multi-core CPU chips at a cost of slightly - increased overhead in some places. If unsure say N here. - -source "kernel/Kconfig.preempt" - -config NUMA - bool "Non Uniform Memory Access (NUMA) Support" - depends on SMP - help - Enable NUMA (Non Uniform Memory Access) support. The kernel - will try to allocate memory used by a CPU on the local memory - controller of the CPU and add some more NUMA awareness to the kernel. - This code is recommended on all multiprocessor Opteron systems. - If the system is EM64T, you should say N unless your system is EM64T - NUMA. - -config K8_NUMA - bool "Old style AMD Opteron NUMA detection" - depends on NUMA && PCI - default y - help - Enable K8 NUMA node topology detection. You should say Y here if - you have a multi processor AMD K8 system. This uses an old - method to read the NUMA configuration directly from the builtin - Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA - instead, which also takes priority if both are compiled in. - -config NODES_SHIFT - int - default "6" - depends on NEED_MULTIPLE_NODES - -# Dummy CONFIG option to select ACPI_NUMA from drivers/acpi/Kconfig. - -config X86_64_ACPI_NUMA - bool "ACPI NUMA detection" - depends on NUMA - select ACPI - select PCI - select ACPI_NUMA - default y - help - Enable ACPI SRAT based node topology detection. - -config NUMA_EMU - bool "NUMA emulation" - depends on NUMA - help - Enable NUMA emulation. A flat machine will be split - into virtual nodes when booted with "numa=fake=N", where N is the - number of nodes. This is only useful for debugging. - -config ARCH_DISCONTIGMEM_ENABLE - bool - depends on NUMA - default y - -config ARCH_DISCONTIGMEM_DEFAULT - def_bool y - depends on NUMA - -config ARCH_SPARSEMEM_ENABLE - def_bool y - depends on (NUMA || EXPERIMENTAL) - select SPARSEMEM_VMEMMAP_ENABLE - -config ARCH_MEMORY_PROBE - def_bool y - depends on MEMORY_HOTPLUG - -config ARCH_FLATMEM_ENABLE - def_bool y - depends on !NUMA - -source "mm/Kconfig" - -config MEMORY_HOTPLUG_RESERVE - def_bool y - depends on (MEMORY_HOTPLUG && DISCONTIGMEM) - -config HAVE_ARCH_EARLY_PFN_TO_NID - def_bool y - depends on NUMA - -config OUT_OF_LINE_PFN_TO_PAGE - def_bool y - depends on DISCONTIGMEM - -config NR_CPUS - int "Maximum number of CPUs (2-255)" - range 2 255 - depends on SMP - default "8" - help - This allows you to specify the maximum number of CPUs which this - kernel will support. Current maximum is 255 CPUs due to - APIC addressing limits. Less depending on the hardware. - - This is purely to save memory - each supported CPU requires - memory in the static kernel configuration. - -config PHYSICAL_ALIGN - hex - default "0x200000" - -config HOTPLUG_CPU - bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)" - depends on SMP && HOTPLUG && EXPERIMENTAL - help - Say Y here to experiment with turning CPUs off and on. CPUs - can be controlled through /sys/devices/system/cpu/cpu#. - This is also required for suspend/hibernation on SMP systems. - - Say N if you want to disable CPU hotplug and don't need to - suspend. - -config ARCH_ENABLE_MEMORY_HOTPLUG - def_bool y - -config HPET_TIMER - bool - default y - help - Use the IA-PC HPET (High Precision Event Timer) to manage - time in preference to the PIT and RTC, if a HPET is - present. The HPET provides a stable time base on SMP - systems, unlike the TSC, but it is more expensive to access, - as it is off-chip. You can find the HPET spec at - <http://www.intel.com/hardwaredesign/hpetspec.htm>. - -config HPET_EMULATE_RTC - bool - depends on HPET_TIMER && RTC=y - default y - -# Mark as embedded because too many people got it wrong. -# The code disables itself when not needed. -config GART_IOMMU - bool "GART IOMMU support" if EMBEDDED - default y - select SWIOTLB - select AGP - depends on PCI - help - Support for full DMA access of devices with 32bit memory access only - on systems with more than 3GB. This is usually needed for USB, - sound, many IDE/SATA chipsets and some other devices. - Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART - based hardware IOMMU and a software bounce buffer based IOMMU used - on Intel systems and as fallback. - The code is only active when needed (enough memory and limited - device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified - too. - -config CALGARY_IOMMU - bool "IBM Calgary IOMMU support" - select SWIOTLB - depends on PCI && EXPERIMENTAL - help - Support for hardware IOMMUs in IBM's xSeries x366 and x460 - systems. Needed to run systems with more than 3GB of memory - properly with 32-bit PCI devices that do not support DAC - (Double Address Cycle). Calgary also supports bus level - isolation, where all DMAs pass through the IOMMU. This - prevents them from going anywhere except their intended - destination. This catches hard-to-find kernel bugs and - mis-behaving drivers and devices that do not use the DMA-API - properly to set up their DMA buffers. The IOMMU can be - turned off at boot time with the iommu=off parameter. - Normally the kernel will make the right choice by itself. - If unsure, say Y. - -config CALGARY_IOMMU_ENABLED_BY_DEFAULT - bool "Should Calgary be enabled by default?" - default y - depends on CALGARY_IOMMU - help - Should Calgary be enabled by default? if you choose 'y', Calgary - will be used (if it exists). If you choose 'n', Calgary will not be - used even if it exists. If you choose 'n' and would like to use - Calgary anyway, pass 'iommu=calgary' on the kernel command line. - If unsure, say Y. - -# need this always selected by IOMMU for the VIA workaround -config SWIOTLB - bool - help - Support for software bounce buffers used on x86-64 systems - which don't have a hardware IOMMU (e.g. the current generation - of Intel's x86-64 CPUs). Using this PCI devices which can only - access 32-bits of memory can be used on systems with more than - 3 GB of memory. If unsure, say Y. - -config X86_MCE - bool "Machine check support" if EMBEDDED - default y - help - Include a machine check error handler to report hardware errors. - This version will require the mcelog utility to decode some - machine check error logs. See - ftp://ftp.x86-64.org/pub/linux/tools/mcelog - -config X86_MCE_INTEL - bool "Intel MCE features" - depends on X86_MCE && X86_LOCAL_APIC - default y - help - Additional support for intel specific MCE features such as - the thermal monitor. - -config X86_MCE_AMD - bool "AMD MCE features" - depends on X86_MCE && X86_LOCAL_APIC - default y - help - Additional support for AMD specific MCE features such as - the DRAM Error Threshold. - -config KEXEC - bool "kexec system call" - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is independent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - - The name comes from the similarity to the exec system call. - - It is an ongoing process to be certain the hardware in a machine - is properly shutdown, so do not be surprised if this code does not - initially work for you. It may help to enable device hotplugging - support. As of this writing the exact hardware interface is - strongly in flux, so no good recommendation can be made. - -config CRASH_DUMP - bool "kernel crash dumps (EXPERIMENTAL)" - depends on EXPERIMENTAL - help - Generate crash dump after being started by kexec. - This should be normally only set in special crash dump kernels - which are loaded in the main kernel with kexec-tools into - a specially reserved region and then later executed after - a crash by kdump/kexec. The crash dump kernel must be compiled - to a memory address not used by the main kernel or BIOS using - PHYSICAL_START, or it must be built as a relocatable image - (CONFIG_RELOCATABLE=y). - For more details see Documentation/kdump/kdump.txt - -config RELOCATABLE - bool "Build a relocatable kernel (EXPERIMENTAL)" - depends on EXPERIMENTAL - help - Builds a relocatable kernel. This enables loading and running - a kernel binary from a different physical address than it has - been compiled for. - - One use is for the kexec on panic case where the recovery kernel - must live at a different physical address than the primary - kernel. - - Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address - it has been loaded at and the compile time physical address - (CONFIG_PHYSICAL_START) is ignored. - -config PHYSICAL_START - hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) - default "0x200000" - help - This gives the physical address where the kernel is loaded. It - should be aligned to 2MB boundary. - - If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then - bzImage will decompress itself to above physical address and - run from there. Otherwise, bzImage will run from the address where - it has been loaded by the boot loader and will ignore above physical - address. - - In normal kdump cases one does not have to set/change this option - as now bzImage can be compiled as a completely relocatable image - (CONFIG_RELOCATABLE=y) and be used to load and run from a different - address. This option is mainly useful for the folks who don't want - to use a bzImage for capturing the crash dump and want to use a - vmlinux instead. - - So if you are using bzImage for capturing the crash dump, leave - the value here unchanged to 0x200000 and set CONFIG_RELOCATABLE=y. - Otherwise if you plan to use vmlinux for capturing the crash dump - change this value to start of the reserved region (Typically 16MB - 0x1000000). In other words, it can be set based on the "X" value as - specified in the "crashkernel=YM@XM" command line boot parameter - passed to the panic-ed kernel. Typically this parameter is set as - crashkernel=64M@16M. Please take a look at - Documentation/kdump/kdump.txt for more details about crash dumps. - - Usage of bzImage for capturing the crash dump is advantageous as - one does not have to build two kernels. Same kernel can be used - as production kernel and capture kernel. - - Don't change this unless you know what you are doing. - -config SECCOMP - bool "Enable seccomp to safely compute untrusted bytecode" - depends on PROC_FS - default y - help - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via /proc/<pid>/seccomp, it cannot be disabled - and the task is only allowed to execute a few safe syscalls - defined by each seccomp mode. - - If unsure, say Y. Only embedded should say N here. - -config CC_STACKPROTECTOR - bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" - depends on EXPERIMENTAL - help - This option turns on the -fstack-protector GCC feature. This - feature puts, at the beginning of critical functions, a canary - value on the stack just before the return address, and validates - the value just before actually returning. Stack based buffer - overflows (that need to overwrite this return address) now also - overwrite the canary, which gets detected and the attack is then - neutralized via a kernel panic. - - This feature requires gcc version 4.2 or above, or a distribution - gcc with the feature backported. Older versions are automatically - detected and for those versions, this configuration option is ignored. - -config CC_STACKPROTECTOR_ALL - bool "Use stack-protector for all functions" - depends on CC_STACKPROTECTOR - help - Normally, GCC only inserts the canary value protection for - functions that use large-ish on-stack buffers. By enabling - this option, GCC will be asked to do this for ALL functions. - -source kernel/Kconfig.hz - -config K8_NB - def_bool y - depends on AGP_AMD64 || GART_IOMMU || (PCI && NUMA) - -endmenu - -# -# Use the generic interrupt handling code in kernel/irq/: -# -config GENERIC_HARDIRQS - bool - default y - -config GENERIC_IRQ_PROBE - bool - default y - -# we have no ISA slots, but we do have ISA-style DMA. -config ISA_DMA_API - bool - default y - -config GENERIC_PENDING_IRQ - bool - depends on GENERIC_HARDIRQS && SMP - default y - -menu "Power management options" - -source kernel/power/Kconfig - -config ARCH_HIBERNATION_HEADER - bool - depends on HIBERNATION - default y - -source "drivers/acpi/Kconfig" - -source "arch/x86/kernel/cpu/cpufreq/Kconfig_64" - -source "drivers/cpuidle/Kconfig" - -endmenu - -menu "Bus options (PCI etc.)" - -config PCI - bool "PCI support" - select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) - -# x86-64 doesn't support PCI BIOS access from long mode so always go direct. -config PCI_DIRECT - bool - depends on PCI - default y - -config PCI_MMCONFIG - bool "Support mmconfig PCI config space access" - depends on PCI && ACPI - -config PCI_DOMAINS - bool - depends on PCI - default y - -config DMAR - bool "Support for DMA Remapping Devices (EXPERIMENTAL)" - depends on PCI_MSI && ACPI && EXPERIMENTAL - help - DMA remapping (DMAR) devices support enables independent address - translations for Direct Memory Access (DMA) from devices. - These DMA remapping devices are reported via ACPI tables - and include PCI device scope covered by these DMA - remapping devices. - -config DMAR_GFX_WA - bool "Support for Graphics workaround" - depends on DMAR - default y - help - Current Graphics drivers tend to use physical address - for DMA and avoid using DMA APIs. Setting this config - option permits the IOMMU driver to set a unity map for - all the OS-visible memory. Hence the driver can continue - to use physical addresses for DMA. - -config DMAR_FLOPPY_WA - bool - depends on DMAR - default y - help - Floppy disk drivers are know to bypass DMA API calls - thereby failing to work when IOMMU is enabled. This - workaround will setup a 1:1 mapping for the first - 16M to make floppy (an ISA device) work. - -source "drivers/pci/pcie/Kconfig" - -source "drivers/pci/Kconfig" - -source "drivers/pcmcia/Kconfig" - -source "drivers/pci/hotplug/Kconfig" - -endmenu - - -menu "Executable file formats / Emulations" - -source "fs/Kconfig.binfmt" - -config IA32_EMULATION - bool "IA32 Emulation" - help - Include code to run 32-bit programs under a 64-bit kernel. You should - likely turn this on, unless you're 100% sure that you don't have any - 32-bit programs left. - -config IA32_AOUT - tristate "IA32 a.out support" - depends on IA32_EMULATION - help - Support old a.out binaries in the 32bit emulation. - -config COMPAT - bool - depends on IA32_EMULATION - default y - -config COMPAT_FOR_U64_ALIGNMENT - def_bool COMPAT - -config SYSVIPC_COMPAT - bool - depends on COMPAT && SYSVIPC - default y - -endmenu - -source "net/Kconfig" - -source drivers/Kconfig - -source "drivers/firmware/Kconfig" - -source fs/Kconfig - -source "kernel/Kconfig.instrumentation" - -source "arch/x86/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 309597386a77..116b03a45636 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -1,12 +1,16 @@ # Unified Makefile for i386 and x86_64 # select defconfig based on actual architecture -KBUILD_DEFCONFIG := $(ARCH)_defconfig +ifeq ($(ARCH),x86) + KBUILD_DEFCONFIG := i386_defconfig +else + KBUILD_DEFCONFIG := $(ARCH)_defconfig +endif -# # No need to remake these files +# No need to remake these files $(srctree)/arch/x86/Makefile%: ; -ifeq ($(ARCH),i386) +ifeq ($(CONFIG_X86_32),y) include $(srctree)/arch/x86/Makefile_32 else include $(srctree)/arch/x86/Makefile_64 diff --git a/arch/x86/Makefile_32 b/arch/x86/Makefile_32 index 346ac0766875..50394da2f6c1 100644 --- a/arch/x86/Makefile_32 +++ b/arch/x86/Makefile_32 @@ -160,7 +160,7 @@ archclean: $(Q)$(MAKE) $(clean)=arch/x86/boot define archhelp - echo '* bzImage - Compressed kernel image (arch/$(ARCH)/boot/bzImage)' + echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)' echo ' install - Install kernel using' echo ' (your) ~/bin/installkernel or' echo ' (distribution) /sbin/installkernel or' @@ -170,6 +170,6 @@ define archhelp echo ' isoimage - Create a boot CD-ROM image' endef -CLEAN_FILES += arch/$(ARCH)/boot/fdimage \ - arch/$(ARCH)/boot/image.iso \ - arch/$(ARCH)/boot/mtools.conf +CLEAN_FILES += arch/x86/boot/fdimage \ + arch/x86/boot/image.iso \ + arch/x86/boot/mtools.conf diff --git a/arch/x86/Makefile_64 b/arch/x86/Makefile_64 index 57e714a47af7..a804860022e6 100644 --- a/arch/x86/Makefile_64 +++ b/arch/x86/Makefile_64 @@ -127,7 +127,7 @@ archclean: $(Q)$(MAKE) $(clean)=$(boot) define archhelp - echo '* bzImage - Compressed kernel image (arch/$(ARCH)/boot/bzImage)' + echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)' echo ' install - Install kernel using' echo ' (your) ~/bin/installkernel or' echo ' (distribution) /sbin/installkernel or' @@ -137,8 +137,8 @@ define archhelp echo ' isoimage - Create a boot CD-ROM image' endef -CLEAN_FILES += arch/$(ARCH)/boot/fdimage \ - arch/$(ARCH)/boot/image.iso \ - arch/$(ARCH)/boot/mtools.conf +CLEAN_FILES += arch/x86/boot/fdimage \ + arch/x86/boot/image.iso \ + arch/x86/boot/mtools.conf diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index 89dbf970e058..7a3116ccf387 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -49,10 +49,10 @@ HOSTCFLAGS_build.o := $(LINUXINCLUDE) # How to compile the 16-bit code. Note we always compile for -march=i386, # that way we can complain to the user if the CPU is insufficient. -cflags-i386 := -cflags-x86_64 := -m32 +cflags-$(CONFIG_X86_32) := +cflags-$(CONFIG_X86_64) := -m32 KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \ - $(cflags-$(ARCH)) \ + $(cflags-y) \ -Wall -Wstrict-prototypes \ -march=i386 -mregparm=3 \ -include $(srctree)/$(src)/code16gcc.h \ diff --git a/arch/x86/boot/cpucheck.c b/arch/x86/boot/cpucheck.c index e655a89c5510..769065bd23d7 100644 --- a/arch/x86/boot/cpucheck.c +++ b/arch/x86/boot/cpucheck.c @@ -42,13 +42,7 @@ static struct cpu_features cpu; static u32 cpu_vendor[3]; static u32 err_flags[NCAPINTS]; -#ifdef CONFIG_X86_64 -static const int req_level = 64; -#elif defined(CONFIG_X86_MINIMUM_CPU_FAMILY) static const int req_level = CONFIG_X86_MINIMUM_CPU_FAMILY; -#else -static const int req_level = 3; -#endif static const u32 req_flags[NCAPINTS] = { diff --git a/arch/x86/kernel/Makefile_32 b/arch/x86/kernel/Makefile_32 index b9d679820306..a7bc93c27662 100644 --- a/arch/x86/kernel/Makefile_32 +++ b/arch/x86/kernel/Makefile_32 @@ -3,6 +3,7 @@ # extra-y := head_32.o init_task.o vmlinux.lds +CPPFLAGS_vmlinux.lds += -Ui386 obj-y := process_32.o signal_32.o entry_32.o traps_32.o irq_32.o \ ptrace_32.o time_32.o ioport_32.o ldt_32.o setup_32.o i8259_32.o sys_i386_32.o \ @@ -60,7 +61,7 @@ quiet_cmd_syscall = SYSCALL $@ cmd_syscall = $(CC) -m elf_i386 -nostdlib $(SYSCFLAGS_$(@F)) \ -Wl,-T,$(filter-out FORCE,$^) -o $@ -export CPPFLAGS_vsyscall_32.lds += -P -C -U$(ARCH) +export CPPFLAGS_vsyscall_32.lds += -P -C -Ui386 vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \ $(call ld-option, -Wl$(comma)--hash-style=sysv) diff --git a/arch/x86/kernel/Makefile_64 b/arch/x86/kernel/Makefile_64 index 24671c3838b3..5a88890d8ee9 100644 --- a/arch/x86/kernel/Makefile_64 +++ b/arch/x86/kernel/Makefile_64 @@ -3,7 +3,9 @@ # extra-y := head_64.o head64.o init_task.o vmlinux.lds +CPPFLAGS_vmlinux.lds += -Ux86_64 EXTRA_AFLAGS := -traditional + obj-y := process_64.o signal_64.o entry_64.o traps_64.o irq_64.o \ ptrace_64.o time_64.o ioport_64.o ldt_64.o setup_64.o i8259_64.o sys_x86_64.o \ x8664_ksyms_64.o i387_64.o syscall_64.o vsyscall_64.o \ diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig_32 b/arch/x86/kernel/cpu/cpufreq/Kconfig index d8c6f132dc7a..151eda0a23fc 100644 --- a/arch/x86/kernel/cpu/cpufreq/Kconfig_32 +++ b/arch/x86/kernel/cpu/cpufreq/Kconfig @@ -19,6 +19,9 @@ config X86_ACPI_CPUFREQ Processor Performance States. This driver also supports Intel Enhanced Speedstep. + To compile this driver as a module, choose M here: the + module will be called acpi-cpufreq. + For details, take a look at <file:Documentation/cpu-freq/>. If in doubt, say N. @@ -26,7 +29,7 @@ config X86_ACPI_CPUFREQ config ELAN_CPUFREQ tristate "AMD Elan SC400 and SC410" select CPU_FREQ_TABLE - depends on X86_ELAN + depends on X86_32 && X86_ELAN ---help--- This adds the CPUFreq driver for AMD Elan SC400 and SC410 processors. @@ -42,7 +45,7 @@ config ELAN_CPUFREQ config SC520_CPUFREQ tristate "AMD Elan SC520" select CPU_FREQ_TABLE - depends on X86_ELAN + depends on X86_32 && X86_ELAN ---help--- This adds the CPUFreq driver for AMD Elan SC520 processor. @@ -54,6 +57,7 @@ config SC520_CPUFREQ config X86_POWERNOW_K6 tristate "AMD Mobile K6-2/K6-3 PowerNow!" select CPU_FREQ_TABLE + depends on X86_32 help This adds the CPUFreq driver for mobile AMD K6-2+ and mobile AMD K6-3+ processors. @@ -65,6 +69,7 @@ config X86_POWERNOW_K6 config X86_POWERNOW_K7 tristate "AMD Mobile Athlon/Duron PowerNow!" select CPU_FREQ_TABLE + depends on X86_32 help This adds the CPUFreq driver for mobile AMD K7 mobile processors. @@ -76,23 +81,27 @@ config X86_POWERNOW_K7_ACPI bool depends on X86_POWERNOW_K7 && ACPI_PROCESSOR depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m) + depends on X86_32 default y config X86_POWERNOW_K8 tristate "AMD Opteron/Athlon64 PowerNow!" select CPU_FREQ_TABLE - depends on EXPERIMENTAL help This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors. + To compile this driver as a module, choose M here: the + module will be called powernow-k8. + For details, take a look at <file:Documentation/cpu-freq/>. If in doubt, say N. config X86_POWERNOW_K8_ACPI - bool "ACPI Support" - select ACPI_PROCESSOR - depends on ACPI && X86_POWERNOW_K8 + bool + prompt "ACPI Support" if X86_32 + depends on ACPI && X86_POWERNOW_K8 && ACPI_PROCESSOR + depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m) default y help This provides access to the K8s Processor Performance States via ACPI. @@ -104,7 +113,7 @@ config X86_POWERNOW_K8_ACPI config X86_GX_SUSPMOD tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" - depends on PCI + depends on X86_32 && PCI help This add the CPUFreq driver for NatSemi Geode processors which support suspend modulation. @@ -114,15 +123,20 @@ config X86_GX_SUSPMOD If in doubt, say N. config X86_SPEEDSTEP_CENTRINO - tristate "Intel Enhanced SpeedStep" + tristate "Intel Enhanced SpeedStep (deprecated)" select CPU_FREQ_TABLE - select X86_SPEEDSTEP_CENTRINO_TABLE + select X86_SPEEDSTEP_CENTRINO_TABLE if X86_32 + depends on X86_32 || (X86_64 && ACPI_PROCESSOR) help + This is deprecated and this functionality is now merged into + acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of + speedstep_centrino. This adds the CPUFreq driver for Enhanced SpeedStep enabled - mobile CPUs. This means Intel Pentium M (Centrino) CPUs. However, - you also need to say Y to "Use ACPI tables to decode..." below - [which might imply enabling ACPI] if you want to use this driver - on non-Banias CPUs. + mobile CPUs. This means Intel Pentium M (Centrino) CPUs + or 64bit enabled Intel Xeons. + + To compile this driver as a module, choose M here: the + module will be called speedstep-centrino. For details, take a look at <file:Documentation/cpu-freq/>. @@ -130,7 +144,7 @@ config X86_SPEEDSTEP_CENTRINO config X86_SPEEDSTEP_CENTRINO_TABLE bool "Built-in tables for Banias CPUs" - depends on X86_SPEEDSTEP_CENTRINO + depends on X86_32 && X86_SPEEDSTEP_CENTRINO default y help Use built-in tables for Banias CPUs if ACPI encoding @@ -141,6 +155,7 @@ config X86_SPEEDSTEP_CENTRINO_TABLE config X86_SPEEDSTEP_ICH tristate "Intel Speedstep on ICH-M chipsets (ioport interface)" select CPU_FREQ_TABLE + depends on X86_32 help This adds the CPUFreq driver for certain mobile Intel Pentium III (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all @@ -154,7 +169,7 @@ config X86_SPEEDSTEP_ICH config X86_SPEEDSTEP_SMI tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)" select CPU_FREQ_TABLE - depends on EXPERIMENTAL + depends on X86_32 && EXPERIMENTAL help This adds the CPUFreq driver for certain mobile Intel Pentium III (Coppermine), all mobile Intel Pentium III-M (Tualatin) @@ -169,15 +184,24 @@ config X86_P4_CLOCKMOD select CPU_FREQ_TABLE help This adds the CPUFreq driver for Intel Pentium 4 / XEON - processors. + processors. When enabled it will lower CPU temperature by skipping + clocks. + + This driver should be only used in exceptional + circumstances when very low power is needed because it causes severe + slowdowns and noticeable latencies. Normally Speedstep should be used + instead. + + To compile this driver as a module, choose M here: the + module will be called p4-clockmod. For details, take a look at <file:Documentation/cpu-freq/>. - If in doubt, say N. + Unless you are absolutely sure say N. config X86_CPUFREQ_NFORCE2 tristate "nVidia nForce2 FSB changing" - depends on EXPERIMENTAL + depends on X86_32 && EXPERIMENTAL help This adds the CPUFreq driver for FSB changing on nVidia nForce2 platforms. @@ -188,6 +212,7 @@ config X86_CPUFREQ_NFORCE2 config X86_LONGRUN tristate "Transmeta LongRun" + depends on X86_32 help This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors which support LongRun. @@ -199,7 +224,7 @@ config X86_LONGRUN config X86_LONGHAUL tristate "VIA Cyrix III Longhaul" select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR + depends on X86_32 && ACPI_PROCESSOR help This adds the CPUFreq driver for VIA Samuel/CyrixIII, VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T @@ -212,7 +237,7 @@ config X86_LONGHAUL config X86_E_POWERSAVER tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)" select CPU_FREQ_TABLE - depends on EXPERIMENTAL + depends on X86_32 && EXPERIMENTAL help This adds the CPUFreq driver for VIA C7 processors. @@ -233,11 +258,11 @@ config X86_ACPI_CPUFREQ_PROC_INTF config X86_SPEEDSTEP_LIB tristate - default X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD + default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD) config X86_SPEEDSTEP_RELAXED_CAP_CHECK bool "Relaxed speedstep capability checks" - depends on (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) + depends on X86_32 && (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) help Don't perform all checks for a speedstep capable system which would normally be done. Some ancient or strange systems, though speedstep diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig_64 b/arch/x86/kernel/cpu/cpufreq/Kconfig_64 deleted file mode 100644 index 9c9699fdcf52..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/Kconfig_64 +++ /dev/null @@ -1,108 +0,0 @@ -# -# CPU Frequency scaling -# - -menu "CPU Frequency scaling" - -source "drivers/cpufreq/Kconfig" - -if CPU_FREQ - -comment "CPUFreq processor drivers" - -config X86_POWERNOW_K8 - tristate "AMD Opteron/Athlon64 PowerNow!" - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors. - - To compile this driver as a module, choose M here: the - module will be called powernow-k8. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_POWERNOW_K8_ACPI - bool - depends on X86_POWERNOW_K8 && ACPI_PROCESSOR - depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m) - default y - -config X86_SPEEDSTEP_CENTRINO - tristate "Intel Enhanced SpeedStep (deprecated)" - select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR - help - This is deprecated and this functionality is now merged into - acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of - speedstep_centrino. - This adds the CPUFreq driver for Enhanced SpeedStep enabled - mobile CPUs. This means Intel Pentium M (Centrino) CPUs - or 64bit enabled Intel Xeons. - - To compile this driver as a module, choose M here: the - module will be called speedstep-centrino. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_ACPI_CPUFREQ - tristate "ACPI Processor P-States driver" - select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR - help - This driver adds a CPUFreq driver which utilizes the ACPI - Processor Performance States. - This driver also supports Intel Enhanced Speedstep. - - To compile this driver as a module, choose M here: the - module will be called acpi-cpufreq. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -comment "shared options" - -config X86_ACPI_CPUFREQ_PROC_INTF - bool "/proc/acpi/processor/../performance interface (deprecated)" - depends on PROC_FS - depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K8_ACPI - help - This enables the deprecated /proc/acpi/processor/../performance - interface. While it is helpful for debugging, the generic, - cross-architecture cpufreq interfaces should be used. - - If in doubt, say N. - -config X86_P4_CLOCKMOD - tristate "Intel Pentium 4 clock modulation" - depends on EMBEDDED - select CPU_FREQ_TABLE - help - This adds the clock modulation driver for Intel Pentium 4 / XEON - processors. When enabled it will lower CPU temperature by skipping - clocks. - - This driver should be only used in exceptional - circumstances when very low power is needed because it causes severe - slowdowns and noticeable latencies. Normally Speedstep should be used - instead. - - To compile this driver as a module, choose M here: the - module will be called p4-clockmod. - - For details, take a look at <file:Documentation/cpu-freq/>. - - Unless you are absolutely sure say N. - - -config X86_SPEEDSTEP_LIB - tristate - default X86_P4_CLOCKMOD - -endif - -endmenu diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 9c36a53676b7..99e1ef9939be 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -46,7 +46,7 @@ #define PFX "powernow-k8: " #define BFX PFX "BIOS error: " -#define VERSION "version 2.00.00" +#define VERSION "version 2.20.00" #include "powernow-k8.h" /* serialize freq changes */ @@ -73,33 +73,11 @@ static u32 find_khz_freq_from_fid(u32 fid) return 1000 * find_freq_from_fid(fid); } -/* Return a frequency in MHz, given an input fid and did */ -static u32 find_freq_from_fiddid(u32 fid, u32 did) +static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, u32 pstate) { - if (current_cpu_data.x86 == 0x10) - return 100 * (fid + 0x10) >> did; - else - return 100 * (fid + 0x8) >> did; -} - -static u32 find_khz_freq_from_fiddid(u32 fid, u32 did) -{ - return 1000 * find_freq_from_fiddid(fid, did); -} - -static u32 find_fid_from_pstate(u32 pstate) -{ - u32 hi, lo; - rdmsr(MSR_PSTATE_DEF_BASE + pstate, lo, hi); - return lo & HW_PSTATE_FID_MASK; + return data[pstate].frequency; } -static u32 find_did_from_pstate(u32 pstate) -{ - u32 hi, lo; - rdmsr(MSR_PSTATE_DEF_BASE + pstate, lo, hi); - return (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT; -} /* Return the vco fid for an input fid * @@ -142,9 +120,7 @@ static int query_current_values_with_pending_wait(struct powernow_k8_data *data) if (cpu_family == CPU_HW_PSTATE) { rdmsr(MSR_PSTATE_STATUS, lo, hi); i = lo & HW_PSTATE_MASK; - rdmsr(MSR_PSTATE_DEF_BASE + i, lo, hi); - data->currfid = lo & HW_PSTATE_FID_MASK; - data->currdid = (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT; + data->currpstate = i; return 0; } do { @@ -295,7 +271,7 @@ static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, static int transition_pstate(struct powernow_k8_data *data, u32 pstate) { wrmsr(MSR_PSTATE_CTRL, pstate, 0); - data->currfid = find_fid_from_pstate(pstate); + data->currpstate = pstate; return 0; } @@ -845,17 +821,20 @@ err_out: static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table) { int i; + u32 hi = 0, lo = 0; + rdmsr(MSR_PSTATE_CUR_LIMIT, hi, lo); + data->max_hw_pstate = (hi & HW_PSTATE_MAX_MASK) >> HW_PSTATE_MAX_SHIFT; for (i = 0; i < data->acpi_data.state_count; i++) { u32 index; u32 hi = 0, lo = 0; - u32 fid; - u32 did; index = data->acpi_data.states[i].control & HW_PSTATE_MASK; - if (index > MAX_HW_PSTATE) { + if (index > data->max_hw_pstate) { printk(KERN_ERR PFX "invalid pstate %d - bad value %d.\n", i, index); printk(KERN_ERR PFX "Please report to BIOS manufacturer\n"); + powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + continue; } rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi); if (!(hi & HW_PSTATE_VALID_MASK)) { @@ -864,22 +843,9 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpuf continue; } - fid = lo & HW_PSTATE_FID_MASK; - did = (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT; + powernow_table[i].index = index; - dprintk(" %d : fid 0x%x, did 0x%x\n", index, fid, did); - - powernow_table[i].index = index | (fid << HW_FID_INDEX_SHIFT) | (did << HW_DID_INDEX_SHIFT); - - powernow_table[i].frequency = find_khz_freq_from_fiddid(fid, did); - - if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) { - printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n", - powernow_table[i].frequency, - (unsigned int) (data->acpi_data.states[i].core_frequency * 1000)); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; - continue; - } + powernow_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000; } return 0; } @@ -1020,22 +986,18 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i /* Take a frequency, and issue the hardware pstate transition command */ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned int index) { - u32 fid = 0; - u32 did = 0; u32 pstate = 0; int res, i; struct cpufreq_freqs freqs; dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); - /* get fid did for hardware pstate transition */ + /* get MSR index for hardware pstate transition */ pstate = index & HW_PSTATE_MASK; - if (pstate > MAX_HW_PSTATE) + if (pstate > data->max_hw_pstate) return 0; - fid = (index & HW_FID_INDEX_MASK) >> HW_FID_INDEX_SHIFT; - did = (index & HW_DID_INDEX_MASK) >> HW_DID_INDEX_SHIFT; - freqs.old = find_khz_freq_from_fiddid(data->currfid, data->currdid); - freqs.new = find_khz_freq_from_fiddid(fid, did); + freqs.old = find_khz_freq_from_pstate(data->powernow_table, data->currpstate); + freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); for_each_cpu_mask(i, *(data->available_cores)) { freqs.cpu = i; @@ -1043,9 +1005,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i } res = transition_pstate(data, pstate); - data->currfid = find_fid_from_pstate(pstate); - data->currdid = find_did_from_pstate(pstate); - freqs.new = find_khz_freq_from_fiddid(data->currfid, data->currdid); + freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); for_each_cpu_mask(i, *(data->available_cores)) { freqs.cpu = i; @@ -1090,10 +1050,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi if (query_current_values_with_pending_wait(data)) goto err_out; - if (cpu_family == CPU_HW_PSTATE) - dprintk("targ: curr fid 0x%x, did 0x%x\n", - data->currfid, data->currdid); - else { + if (cpu_family != CPU_HW_PSTATE) { dprintk("targ: curr fid 0x%x, vid 0x%x\n", data->currfid, data->currvid); @@ -1124,7 +1081,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi mutex_unlock(&fidvid_mutex); if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_fiddid(data->currfid, data->currdid); + pol->cur = find_khz_freq_from_pstate(data->powernow_table, newstate); else pol->cur = find_khz_freq_from_fid(data->currfid); ret = 0; @@ -1223,7 +1180,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) + (3 * (1 << data->irt) * 10)) * 1000; if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_fiddid(data->currfid, data->currdid); + pol->cur = find_khz_freq_from_pstate(data->powernow_table, data->currpstate); else pol->cur = find_khz_freq_from_fid(data->currfid); dprintk("policy current frequency %d kHz\n", pol->cur); @@ -1240,8 +1197,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu); if (cpu_family == CPU_HW_PSTATE) - dprintk("cpu_init done, current fid 0x%x, did 0x%x\n", - data->currfid, data->currdid); + dprintk("cpu_init done, current pstate 0x%x\n", data->currpstate); else dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n", data->currfid, data->currvid); @@ -1297,7 +1253,7 @@ static unsigned int powernowk8_get (unsigned int cpu) goto out; if (cpu_family == CPU_HW_PSTATE) - khz = find_khz_freq_from_fiddid(data->currfid, data->currdid); + khz = find_khz_freq_from_pstate(data->powernow_table, data->currpstate); else khz = find_khz_freq_from_fid(data->currfid); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h index 7c4f6e0faed4..afd2b520d35c 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h @@ -10,6 +10,7 @@ struct powernow_k8_data { u32 numps; /* number of p-states */ u32 batps; /* number of p-states supported on battery */ + u32 max_hw_pstate; /* maximum legal hardware pstate */ /* these values are constant when the PSB is used to determine * vid/fid pairings, but are modified during the ->target() call @@ -21,8 +22,8 @@ struct powernow_k8_data { u32 plllock; /* pll lock time, units 1 us */ u32 exttype; /* extended interface = 1 */ - /* keep track of the current fid / vid or did */ - u32 currvid, currfid, currdid; + /* keep track of the current fid / vid or pstate */ + u32 currvid, currfid, currpstate; /* the powernow_table includes all frequency and vid/fid pairings: * fid are the lower 8 bits of the index, vid are the upper 8 bits. @@ -87,23 +88,14 @@ struct powernow_k8_data { /* Hardware Pstate _PSS and MSR definitions */ #define USE_HW_PSTATE 0x00000080 -#define HW_PSTATE_FID_MASK 0x0000003f -#define HW_PSTATE_DID_MASK 0x000001c0 -#define HW_PSTATE_DID_SHIFT 6 #define HW_PSTATE_MASK 0x00000007 #define HW_PSTATE_VALID_MASK 0x80000000 -#define HW_FID_INDEX_SHIFT 8 -#define HW_FID_INDEX_MASK 0x0000ff00 -#define HW_DID_INDEX_SHIFT 16 -#define HW_DID_INDEX_MASK 0x00ff0000 -#define HW_WATTS_MASK 0xff -#define HW_PWR_DVR_MASK 0x300 -#define HW_PWR_DVR_SHIFT 8 -#define HW_PWR_MAX_MULT 3 -#define MAX_HW_PSTATE 8 /* hw pstate supports up to 8 */ +#define HW_PSTATE_MAX_MASK 0x000000f0 +#define HW_PSTATE_MAX_SHIFT 4 #define MSR_PSTATE_DEF_BASE 0xc0010064 /* base of Pstate MSRs */ #define MSR_PSTATE_STATUS 0xc0010063 /* Pstate Status MSR */ #define MSR_PSTATE_CTRL 0xc0010062 /* Pstate control MSR */ +#define MSR_PSTATE_CUR_LIMIT 0xc0010061 /* pstate current limit MSR */ /* define the two driver architectures */ #define CPU_OPTERON 0 diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index b9f802e35209..447b351f1f2a 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -802,6 +802,8 @@ static struct sysdev_attribute *mce_attributes[] = { NULL }; +static cpumask_t mce_device_initialized = CPU_MASK_NONE; + /* Per cpu sysdev init. All of the cpus still share the same ctl bank */ static __cpuinit int mce_create_device(unsigned int cpu) { @@ -825,6 +827,7 @@ static __cpuinit int mce_create_device(unsigned int cpu) if (err) goto error; } + cpu_set(cpu, mce_device_initialized); return 0; error: @@ -841,10 +844,14 @@ static void mce_remove_device(unsigned int cpu) { int i; + if (!cpu_isset(cpu, mce_device_initialized)) + return; + for (i = 0; mce_attributes[i]; i++) sysdev_remove_file(&per_cpu(device_mce,cpu), mce_attributes[i]); sysdev_unregister(&per_cpu(device_mce,cpu)); + cpu_clear(cpu, mce_device_initialized); } /* Get notified when a cpu comes on/off. Be hotplug friendly. */ @@ -852,21 +859,18 @@ static int mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; - int err = 0; switch (action) { - case CPU_UP_PREPARE: - case CPU_UP_PREPARE_FROZEN: - err = mce_create_device(cpu); + case CPU_ONLINE: + case CPU_ONLINE_FROZEN: + mce_create_device(cpu); break; - case CPU_UP_CANCELED: - case CPU_UP_CANCELED_FROZEN: case CPU_DEAD: case CPU_DEAD_FROZEN: mce_remove_device(cpu); break; } - return err ? NOTIFY_BAD : NOTIFY_OK; + return NOTIFY_OK; } static struct notifier_block mce_cpu_notifier = { diff --git a/arch/x86/kernel/i387_64.c b/arch/x86/kernel/i387_64.c index 56c1f1147109..bfaff28fb134 100644 --- a/arch/x86/kernel/i387_64.c +++ b/arch/x86/kernel/i387_64.c @@ -92,13 +92,14 @@ int save_i387(struct _fpstate __user *buf) if (task_thread_info(tsk)->status & TS_USEDFPU) { err = save_i387_checking((struct i387_fxsave_struct __user *)buf); if (err) return err; + task_thread_info(tsk)->status &= ~TS_USEDFPU; stts(); - } else { - if (__copy_to_user(buf, &tsk->thread.i387.fxsave, + } else { + if (__copy_to_user(buf, &tsk->thread.i387.fxsave, sizeof(struct i387_fxsave_struct))) return -1; - } - return 1; + } + return 1; } /* diff --git a/arch/x86/lib/delay_32.c b/arch/x86/lib/delay_32.c index 952e7a89c2ac..aad9d95469dc 100644 --- a/arch/x86/lib/delay_32.c +++ b/arch/x86/lib/delay_32.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/sched.h> +#include <linux/preempt.h> #include <linux/delay.h> #include <asm/processor.h> @@ -42,11 +43,13 @@ static void delay_tsc(unsigned long loops) { unsigned long bclock, now; + preempt_disable(); /* TSC's are per-cpu */ rdtscl(bclock); do { rep_nop(); rdtscl(now); } while ((now-bclock) < loops); + preempt_enable(); } /* diff --git a/arch/x86/lib/delay_64.c b/arch/x86/lib/delay_64.c index 0ebbfb9e7c7f..45cdd3fbd91c 100644 --- a/arch/x86/lib/delay_64.c +++ b/arch/x86/lib/delay_64.c @@ -10,7 +10,9 @@ #include <linux/module.h> #include <linux/sched.h> +#include <linux/preempt.h> #include <linux/delay.h> + #include <asm/delay.h> #include <asm/msr.h> @@ -27,14 +29,15 @@ int read_current_timer(unsigned long *timer_value) void __delay(unsigned long loops) { unsigned bclock, now; - + + preempt_disable(); /* TSC's are pre-cpu */ rdtscl(bclock); - do - { + do { rep_nop(); rdtscl(now); } - while((now-bclock) < loops); + while ((now-bclock) < loops); + preempt_enable(); } EXPORT_SYMBOL(__delay); diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile index 7a2ba4583939..e7bff0fbac23 100644 --- a/arch/x86/vdso/Makefile +++ b/arch/x86/vdso/Makefile @@ -20,7 +20,7 @@ quiet_cmd_syscall = SYSCALL $@ cmd_syscall = $(CC) -m elf_x86_64 -nostdlib $(SYSCFLAGS_$(@F)) \ -Wl,-T,$(filter-out FORCE,$^) -o $@ -export CPPFLAGS_vdso.lds += -P -C -U$(ARCH) +export CPPFLAGS_vdso.lds += -P -C vdso-flags = -fPIC -shared -Wl,-soname=linux-vdso.so.1 \ $(call ld-option, -Wl$(comma)--hash-style=sysv) \ |