707 files changed, 47666 insertions, 18067 deletions

diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c
index 582a3519fb28..9903e3a79102 100644
--- a/arch/alpha/kernel/pci-noop.c
+++ b/arch/alpha/kernel/pci-noop.c
@@ -154,7 +154,7 @@ pci_dma_supported(struct pci_dev *hwdev, dma_addr_t mask)
 
 void *
 dma_alloc_coherent(struct device *dev, size_t size,
-		   dma_addr_t *dma_handle, int gfp)
+		   dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
 
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 7cb23f12ecbd..c468e312e5f8 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -397,7 +397,7 @@ pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
 {
 	void *cpu_addr;
 	long order = get_order(size);
-	int gfp = GFP_ATOMIC;
+	gfp_t gfp = GFP_ATOMIC;
 
 try_again:
 	cpu_addr = (void *)__get_free_pages(gfp, order);
diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
index 67be50b7d80a..6b2921be1909 100644
--- a/arch/alpha/kernel/time.c
+++ b/arch/alpha/kernel/time.c
@@ -55,10 +55,6 @@
 #include "proto.h"
 #include "irq_impl.h"
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 extern unsigned long wall_jiffies;	/* kernel/timer.c */
 
 static int set_rtc_mmss(unsigned long);
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index c7481d59b6df..6d5251254f68 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -371,6 +371,8 @@ show_mem(void)
 	show_free_areas();
 	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 	for_each_online_node(nid) {
+		unsigned long flags;
+		pgdat_resize_lock(NODE_DATA(nid), &flags);
 		i = node_spanned_pages(nid);
 		while (i-- > 0) {
 			struct page *page = nid_page_nr(nid, i);
@@ -384,6 +386,7 @@ show_mem(void)
 			else
 				shared += page_count(page) - 1;
 		}
+		pgdat_resize_unlock(NODE_DATA(nid), &flags);
 	}
 	printk("%ld pages of RAM\n",total);
 	printk("%ld free pages\n",free);
diff --git a/arch/alpha/mm/remap.c b/arch/alpha/mm/remap.c
index 19817ad3d89b..a78356c3ead5 100644
--- a/arch/alpha/mm/remap.c
+++ b/arch/alpha/mm/remap.c
@@ -2,7 +2,6 @@
 #include <asm/pgalloc.h>
 #include <asm/cacheflush.h>
 
-/* called with the page_table_lock held */
 static inline void 
 remap_area_pte(pte_t * pte, unsigned long address, unsigned long size, 
 	       unsigned long phys_addr, unsigned long flags)
@@ -31,7 +30,6 @@ remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
 	} while (address && (address < end));
 }
 
-/* called with the page_table_lock held */
 static inline int 
 remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size, 
 	       unsigned long phys_addr, unsigned long flags)
@@ -46,7 +44,7 @@ remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
 	if (address >= end)
 		BUG();
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, 
@@ -70,7 +68,6 @@ __alpha_remap_area_pages(unsigned long address, unsigned long phys_addr,
 	flush_cache_all();
 	if (address >= end)
 		BUG();
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		pmd_t *pmd;
 		pmd = pmd_alloc(&init_mm, dir, address);
@@ -84,7 +81,6 @@ __alpha_remap_area_pages(unsigned long address, unsigned long phys_addr,
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	} while (address && (address < end));
-	spin_unlock(&init_mm.page_table_lock);
 	return error;
 }
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 11fff042aa81..682367bd0f65 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -204,6 +204,7 @@ config ARCH_H720X
 
 config ARCH_AAEC2000
 	bool "Agilent AAEC-2000 based"
+	select ARM_AMBA
 	help
 	  This enables support for systems based on the Agilent AAEC-2000
 
@@ -687,7 +688,8 @@ source "drivers/acorn/block/Kconfig"
 
 if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
 	|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
-	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
+	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
+	|| MACH_MP1000
 source "drivers/ide/Kconfig"
 endif
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 299bc0468702..64cf480b0b02 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -8,7 +8,7 @@
 # Copyright (C) 1995-2001 by Russell King
 
 LDFLAGS_vmlinux	:=-p --no-undefined -X
-CPPFLAGS_vmlinux.lds = -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR)
+CPPFLAGS_vmlinux.lds = -DKERNEL_RAM_ADDR=$(TEXTADDR)
 OBJCOPYFLAGS	:=-O binary -R .note -R .comment -S
 GZFLAGS		:=-9
 #CFLAGS		+=-pipe
@@ -108,27 +108,19 @@ export CFLAGS_3c589_cs.o
 endif
 
 TEXTADDR := $(textaddr-y)
-ifeq ($(CONFIG_XIP_KERNEL),y)
-  DATAADDR := $(TEXTADDR)
-  xipaddr-$(CONFIG_ARCH_CO285) := 0x5f000000
-  xipaddr-y ?= 0xbf000000
-  # Replace phys addr with virt addr while keeping offset from base.
-  TEXTADDR := $(shell echo $(CONFIG_XIP_PHYS_ADDR) $(xipaddr-y) | \
-                      awk --non-decimal-data '/[:xdigit:]/ \
-                          { printf("0x%x\n", and($$1, 0x000fffff) + $$2) }' )
-endif
 
 ifeq ($(incdir-y),)
 incdir-y := $(machine-y)
 endif
 INCDIR   := arch-$(incdir-y)
+
 ifneq ($(machine-y),)
 MACHINE  := arch/arm/mach-$(machine-y)/
 else
 MACHINE  :=
 endif
   
-export	TEXTADDR DATAADDR GZFLAGS
+export	TEXTADDR GZFLAGS
 
 # Do we have FASTFPE?
 FASTFPE		:=arch/arm/fastfpe
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 7c7f475e213e..a54d2eb64892 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -39,7 +39,8 @@
     defined(CONFIG_ARCH_IXP4XX) || \
     defined(CONFIG_ARCH_IXP2000) || \
     defined(CONFIG_ARCH_LH7A40X) || \
-    defined(CONFIG_ARCH_OMAP)
+    defined(CONFIG_ARCH_OMAP) || \
+    defined(CONFIG_MACH_MP1000)
 		.macro	loadsp,	rb
 		addruart \rb
 		.endm
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 23434b56786a..50f13eec6cd7 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -30,7 +30,7 @@ unsigned int __machine_arch_type;
 #define putstr icedcc_putstr
 #define putc icedcc_putc
 
-extern void idedcc_putc(int ch);
+extern void icedcc_putc(int ch);
 
 static void
 icedcc_putstr(const char *ptr)
diff --git a/arch/arm/common/amba.c b/arch/arm/common/amba.c
index c6beb751f2a9..e1013112c354 100644
--- a/arch/arm/common/amba.c
+++ b/arch/arm/common/amba.c
@@ -10,6 +10,8 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/string.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index cbf2165476b0..ad6c89a555bb 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -33,8 +33,8 @@
 #include <asm/cacheflush.h>
 
 #undef DEBUG
-
 #undef STATS
+
 #ifdef STATS
 #define DO_STATS(X) do { X ; } while (0)
 #else
@@ -52,26 +52,31 @@ struct safe_buffer {
 	int		direction;
 
 	/* safe buffer info */
-	struct dma_pool *pool;
+	struct dmabounce_pool *pool;
 	void		*safe;
 	dma_addr_t	safe_dma_addr;
 };
 
+struct dmabounce_pool {
+	unsigned long	size;
+	struct dma_pool	*pool;
+#ifdef STATS
+	unsigned long	allocs;
+#endif
+};
+
 struct dmabounce_device_info {
 	struct list_head node;
 
 	struct device *dev;
-	struct dma_pool *small_buffer_pool;
-	struct dma_pool *large_buffer_pool;
 	struct list_head safe_buffers;
-	unsigned long small_buffer_size, large_buffer_size;
 #ifdef STATS
-	unsigned long sbp_allocs;
-	unsigned long lbp_allocs;
 	unsigned long total_allocs;
 	unsigned long map_op_count;
 	unsigned long bounce_count;
 #endif
+	struct dmabounce_pool	small;
+	struct dmabounce_pool	large;
 };
 
 static LIST_HEAD(dmabounce_devs);
@@ -82,9 +87,9 @@ static void print_alloc_stats(struct dmabounce_device_info *device_info)
 	printk(KERN_INFO
 		"%s: dmabounce: sbp: %lu, lbp: %lu, other: %lu, total: %lu\n",
 		device_info->dev->bus_id,
-		device_info->sbp_allocs, device_info->lbp_allocs,
-		device_info->total_allocs - device_info->sbp_allocs -
-			device_info->lbp_allocs,
+		device_info->small.allocs, device_info->large.allocs,
+		device_info->total_allocs - device_info->small.allocs -
+			device_info->large.allocs,
 		device_info->total_allocs);
 }
 #endif
@@ -106,18 +111,22 @@ find_dmabounce_dev(struct device *dev)
 /* allocate a 'safe' buffer and keep track of it */
 static inline struct safe_buffer *
 alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
-			size_t size, enum dma_data_direction dir)
+		  size_t size, enum dma_data_direction dir)
 {
 	struct safe_buffer *buf;
-	struct dma_pool *pool;
+	struct dmabounce_pool *pool;
 	struct device *dev = device_info->dev;
-	void *safe;
-	dma_addr_t safe_dma_addr;
 
 	dev_dbg(dev, "%s(ptr=%p, size=%d, dir=%d)\n",
 		__func__, ptr, size, dir);
 
-	DO_STATS ( device_info->total_allocs++ );
+	if (size <= device_info->small.size) {
+		pool = &device_info->small;
+	} else if (size <= device_info->large.size) {
+		pool = &device_info->large;
+	} else {
+		pool = NULL;
+	}
 
 	buf = kmalloc(sizeof(struct safe_buffer), GFP_ATOMIC);
 	if (buf == NULL) {
@@ -125,41 +134,35 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
 		return NULL;
 	}
 
-	if (size <= device_info->small_buffer_size) {
-		pool = device_info->small_buffer_pool;
-		safe = dma_pool_alloc(pool, GFP_ATOMIC, &safe_dma_addr);
-
-		DO_STATS ( device_info->sbp_allocs++ );
-	} else if (size <= device_info->large_buffer_size) {
-		pool = device_info->large_buffer_pool;
-		safe = dma_pool_alloc(pool, GFP_ATOMIC, &safe_dma_addr);
+	buf->ptr = ptr;
+	buf->size = size;
+	buf->direction = dir;
+	buf->pool = pool;
 
-		DO_STATS ( device_info->lbp_allocs++ );
+	if (pool) {
+		buf->safe = dma_pool_alloc(pool->pool, GFP_ATOMIC,
+					   &buf->safe_dma_addr);
 	} else {
-		pool = NULL;
-		safe = dma_alloc_coherent(dev, size, &safe_dma_addr, GFP_ATOMIC);
+		buf->safe = dma_alloc_coherent(dev, size, &buf->safe_dma_addr,
+					       GFP_ATOMIC);
 	}
 
-	if (safe == NULL) {
-		dev_warn(device_info->dev,
-			"%s: could not alloc dma memory (size=%d)\n",
-		       __func__, size);
+	if (buf->safe == NULL) {
+		dev_warn(dev,
+			 "%s: could not alloc dma memory (size=%d)\n",
+			 __func__, size);
 		kfree(buf);
 		return NULL;
 	}
 
 #ifdef STATS
+	if (pool)
+		pool->allocs++;
+	device_info->total_allocs++;
 	if (device_info->total_allocs % 1000 == 0)
 		print_alloc_stats(device_info);
 #endif
 
-	buf->ptr = ptr;
-	buf->size = size;
-	buf->direction = dir;
-	buf->pool = pool;
-	buf->safe = safe;
-	buf->safe_dma_addr = safe_dma_addr;
-
 	list_add(&buf->node, &device_info->safe_buffers);
 
 	return buf;
@@ -186,7 +189,7 @@ free_safe_buffer(struct dmabounce_device_info *device_info, struct safe_buffer *
 	list_del(&buf->node);
 
 	if (buf->pool)
-		dma_pool_free(buf->pool, buf->safe, buf->safe_dma_addr);
+		dma_pool_free(buf->pool->pool, buf->safe, buf->safe_dma_addr);
 	else
 		dma_free_coherent(device_info->dev, buf->size, buf->safe,
 				    buf->safe_dma_addr);
@@ -197,12 +200,10 @@ free_safe_buffer(struct dmabounce_device_info *device_info, struct safe_buffer *
 /* ************************************************** */
 
 #ifdef STATS
-
 static void print_map_stats(struct dmabounce_device_info *device_info)
 {
-	printk(KERN_INFO
-		"%s: dmabounce: map_op_count=%lu, bounce_count=%lu\n",
-		device_info->dev->bus_id,
+	dev_info(device_info->dev,
+		"dmabounce: map_op_count=%lu, bounce_count=%lu\n",
 		device_info->map_op_count, device_info->bounce_count);
 }
 #endif
@@ -258,13 +259,13 @@ map_single(struct device *dev, void *ptr, size_t size,
 				__func__, ptr, buf->safe, size);
 			memcpy(buf->safe, ptr, size);
 		}
-		consistent_sync(buf->safe, size, dir);
+		ptr = buf->safe;
 
 		dma_addr = buf->safe_dma_addr;
-	} else {
-		consistent_sync(ptr, size, dir);
 	}
 
+	consistent_sync(ptr, size, dir);
+
 	return dma_addr;
 }
 
@@ -278,7 +279,7 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 	/*
 	 * Trying to unmap an invalid mapping
 	 */
-	if (dma_addr == ~0) {
+	if (dma_mapping_error(dma_addr)) {
 		dev_err(dev, "Trying to unmap invalid mapping\n");
 		return;
 	}
@@ -570,11 +571,25 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
 	local_irq_restore(flags);
 }
 
+static int
+dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev, const char *name,
+		    unsigned long size)
+{
+	pool->size = size;
+	DO_STATS(pool->allocs = 0);
+	pool->pool = dma_pool_create(name, dev, size,
+				     0 /* byte alignment */,
+				     0 /* no page-crossing issues */);
+
+	return pool->pool ? 0 : -ENOMEM;
+}
+
 int
 dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 			unsigned long large_buffer_size)
 {
 	struct dmabounce_device_info *device_info;
+	int ret;
 
 	device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC);
 	if (!device_info) {
@@ -584,45 +599,31 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 		return -ENOMEM;
 	}
 
-	device_info->small_buffer_pool =
-		dma_pool_create("small_dmabounce_pool",
-				dev,
-				small_buffer_size,
-				0 /* byte alignment */,
-				0 /* no page-crossing issues */);
-	if (!device_info->small_buffer_pool) {
-		printk(KERN_ERR
-			"dmabounce: could not allocate small DMA pool for %s\n",
-			dev->bus_id);
-		kfree(device_info);
-		return -ENOMEM;
+	ret = dmabounce_init_pool(&device_info->small, dev,
+				  "small_dmabounce_pool", small_buffer_size);
+	if (ret) {
+		dev_err(dev,
+			"dmabounce: could not allocate DMA pool for %ld byte objects\n",
+			small_buffer_size);
+		goto err_free;
 	}
 
 	if (large_buffer_size) {
-		device_info->large_buffer_pool =
-			dma_pool_create("large_dmabounce_pool",
-					dev,
-					large_buffer_size,
-					0 /* byte alignment */,
-					0 /* no page-crossing issues */);
-		if (!device_info->large_buffer_pool) {
-		printk(KERN_ERR
-			"dmabounce: could not allocate large DMA pool for %s\n",
-			dev->bus_id);
-			dma_pool_destroy(device_info->small_buffer_pool);
-
-			return -ENOMEM;
+		ret = dmabounce_init_pool(&device_info->large, dev,
+					  "large_dmabounce_pool",
+					  large_buffer_size);
+		if (ret) {
+			dev_err(dev,
+				"dmabounce: could not allocate DMA pool for %ld byte objects\n",
+				large_buffer_size);
+			goto err_destroy;
 		}
 	}
 
 	device_info->dev = dev;
-	device_info->small_buffer_size = small_buffer_size;
-	device_info->large_buffer_size = large_buffer_size;
 	INIT_LIST_HEAD(&device_info->safe_buffers);
 
 #ifdef STATS
-	device_info->sbp_allocs = 0;
-	device_info->lbp_allocs = 0;
 	device_info->total_allocs = 0;
 	device_info->map_op_count = 0;
 	device_info->bounce_count = 0;
@@ -634,6 +635,12 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 		dev->bus_id, dev->bus->name);
 
 	return 0;
+
+ err_destroy:
+	dma_pool_destroy(device_info->small.pool);
+ err_free:
+	kfree(device_info);
+	return ret;
 }
 
 void
@@ -655,10 +662,10 @@ dmabounce_unregister_dev(struct device *dev)
 		BUG();
 	}
 
-	if (device_info->small_buffer_pool)
-		dma_pool_destroy(device_info->small_buffer_pool);
-	if (device_info->large_buffer_pool)
-		dma_pool_destroy(device_info->large_buffer_pool);
+	if (device_info->small.pool)
+		dma_pool_destroy(device_info->small.pool);
+	if (device_info->large.pool)
+		dma_pool_destroy(device_info->large.pool);
 
 #ifdef STATS
 	print_alloc_stats(device_info);
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index e8053d16829b..5cdb4122f057 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -550,15 +550,12 @@ struct locomo_save_data {
 	u16	LCM_SPIMD;
 };
 
-static int locomo_suspend(struct device *dev, pm_message_t state, u32 level)
+static int locomo_suspend(struct device *dev, pm_message_t state)
 {
 	struct locomo *lchip = dev_get_drvdata(dev);
 	struct locomo_save_data *save;
 	unsigned long flags;
 
-	if (level != SUSPEND_DISABLE)
-		return 0;
-
 	save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL);
 	if (!save)
 		return -ENOMEM;
@@ -597,16 +594,13 @@ static int locomo_suspend(struct device *dev, pm_message_t state, u32 level)
 	return 0;
 }
 
-static int locomo_resume(struct device *dev, u32 level)
+static int locomo_resume(struct device *dev)
 {
 	struct locomo *lchip = dev_get_drvdata(dev);
 	struct locomo_save_data *save;
 	unsigned long r;
 	unsigned long flags;
 	
-	if (level != RESUME_ENABLE)
-		return 0;
-
 	save = (struct locomo_save_data *) dev->power.saved_state;
 	if (!save)
 		return 0;
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 1a47fbf9cbbc..21e2a518ad3a 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -801,7 +801,7 @@ struct sa1111_save_data {
 
 #ifdef CONFIG_PM
 
-static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level)
+static int sa1111_suspend(struct device *dev, pm_message_t state)
 {
 	struct sa1111 *sachip = dev_get_drvdata(dev);
 	struct sa1111_save_data *save;
@@ -809,9 +809,6 @@ static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level)
 	unsigned int val;
 	void __iomem *base;
 
-	if (level != SUSPEND_DISABLE)
-		return 0;
-
 	save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
 	if (!save)
 		return -ENOMEM;
@@ -856,23 +853,19 @@ static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level)
 /*
  *	sa1111_resume - Restore the SA1111 device state.
  *	@dev: device to restore
- *	@level: resume level
  *
  *	Restore the general state of the SA1111; clock control and
  *	interrupt controller.  Other parts of the SA1111 must be
  *	restored by their respective drivers, and must be called
  *	via LDM after this function.
  */
-static int sa1111_resume(struct device *dev, u32 level)
+static int sa1111_resume(struct device *dev)
 {
 	struct sa1111 *sachip = dev_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags, id;
 	void __iomem *base;
 
-	if (level != RESUME_ENABLE)
-		return 0;
-
 	save = (struct sa1111_save_data *)dev->power.saved_state;
 	if (!save)
 		return 0;
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 9e5245c702de..4af0cf5f3bfb 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -12,6 +12,9 @@
  */
 
 #include <linux/device.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
 #include <asm/io.h>
 #include <asm/hardware/scoop.h>
 
@@ -102,26 +105,24 @@ static void check_scoop_reg(struct scoop_dev *sdev)
 }
 
 #ifdef CONFIG_PM
-static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level)
+static int scoop_suspend(struct device *dev, pm_message_t state)
 {
-	if (level == SUSPEND_POWER_DOWN) {
-		struct scoop_dev *sdev = dev_get_drvdata(dev);
+	struct scoop_dev *sdev = dev_get_drvdata(dev);
+
+	check_scoop_reg(sdev);
+	sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
+	SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
 
-		check_scoop_reg(sdev);
-  		sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
-		SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
-	}
 	return 0;
 }
 
-static int scoop_resume(struct device *dev, uint32_t level)
+static int scoop_resume(struct device *dev)
 {
-	if (level == RESUME_POWER_ON) {
-		struct scoop_dev *sdev = dev_get_drvdata(dev);
+	struct scoop_dev *sdev = dev_get_drvdata(dev);
+
+	check_scoop_reg(sdev);
+	SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
 
-		check_scoop_reg(sdev);
-		SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
-	}
 	return 0;
 }
 #else
diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig
index 678720fa2e2e..ddeb9f99d662 100644
--- a/arch/arm/configs/ixdp2400_defconfig
+++ b/arch/arm/configs/ixdp2400_defconfig
@@ -559,7 +559,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=1
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig
index 261e2343903b..81d3a0606f95 100644
--- a/arch/arm/configs/ixdp2800_defconfig
+++ b/arch/arm/configs/ixdp2800_defconfig
@@ -559,7 +559,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=1
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
diff --git a/arch/arm/configs/mp1000_defconfig b/arch/arm/configs/mp1000_defconfig
new file mode 100644
index 000000000000..d2cbc6fada1d
--- /dev/null
+++ b/arch/arm/configs/mp1000_defconfig
@@ -0,0 +1,897 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc1
+# Fri Sep 16 15:48:13 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+CONFIG_ARCH_CLPS711X=y
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# CLPS711X/EP721X Implementations
+#
+# CONFIG_ARCH_AUTCPU12 is not set
+# CONFIG_ARCH_CDB89712 is not set
+# CONFIG_ARCH_CEIVA is not set
+# CONFIG_ARCH_CLEP7312 is not set
+# CONFIG_ARCH_EDB7211 is not set
+# CONFIG_ARCH_P720T is not set
+# CONFIG_ARCH_FORTUNET is not set
+CONFIG_MACH_MP1000=y
+CONFIG_MP1000_90MHZ=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM720T=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_LV4T=y
+CONFIG_CPU_CACHE_V4=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WT=y
+CONFIG_CPU_TLB_V4WT=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_SMP is not set
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyCL,38400 root=/dev/discs/disc0/part1 ip=any cs89x0_media=rj45"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+# CONFIG_MTD_CFI_I1 is not set
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=m
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_START=0x0000000
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_EDB7312=m
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_MP1000=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+CONFIG_IDE_ARM=y
+CONFIG_BLK_DEV_IDE_MP1000=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_CS89x0=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CLPS711X=y
+CONFIG_SERIAL_CLPS711X_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_NVRAM=y
+CONFIG_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_WAITQ=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_CLPS711X_UART2 is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 3e1b0327e4d7..c11169b5ed9a 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-AFLAGS_head.o := -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR)
+AFLAGS_head.o := -DKERNEL_RAM_ADDR=$(TEXTADDR)
 
 # Object file lists.
 
diff --git a/arch/arm/kernel/arthur.c b/arch/arm/kernel/arthur.c
index a418dad6692c..0ee2e9819631 100644
--- a/arch/arm/kernel/arthur.c
+++ b/arch/arm/kernel/arthur.c
@@ -18,6 +18,7 @@
 #include <linux/stddef.h>
 #include <linux/signal.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 
 #include <asm/ptrace.h>
 
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index c1ff4d1f1bfd..04d3082a7b94 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -94,7 +94,6 @@ int main(void)
   DEFINE(VM_EXEC,	       	VM_EXEC);
   BLANK();
   DEFINE(PAGE_SZ,	       	PAGE_SIZE);
-  DEFINE(VIRT_OFFSET,		PAGE_OFFSET);
   BLANK();
   DEFINE(SYS_ERROR0,		0x9f0000);
   BLANK();
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 93b5e8e5292e..be439cab92c6 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -15,6 +15,7 @@
  */
 #include <linux/config.h>
 
+#include <asm/memory.h>
 #include <asm/glue.h>
 #include <asm/vfpmacros.h>
 #include <asm/hardware.h>		/* should be moved into entry-macro.S */
@@ -310,7 +311,7 @@ __pabt_svc:
 
 #if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
 	@ make sure our user space atomic helper is aborted
-	cmp	r2, #VIRT_OFFSET
+	cmp	r2, #TASK_SIZE
 	bichs	r3, r3, #PSR_Z_BIT
 #endif
 
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 539626351348..8d8748407cbe 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -21,6 +21,7 @@
 #include <asm/procinfo.h>
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
+#include <asm/memory.h>
 #include <asm/thread_info.h>
 #include <asm/system.h>
 
@@ -33,52 +34,28 @@
 #define MACHINFO_PGOFFIO	12
 #define MACHINFO_NAME		16
 
-#ifndef CONFIG_XIP_KERNEL
 /*
- * We place the page tables 16K below TEXTADDR.  Therefore, we must make sure
- * that TEXTADDR is correctly set.  Currently, we expect the least significant
- * 16 bits to be 0x8000, but we could probably relax this restriction to
- * TEXTADDR >= PAGE_OFFSET + 0x4000
- *
- * Note that swapper_pg_dir is the virtual address of the page tables, and
- * pgtbl gives us a position-independent reference to these tables.  We can
- * do this because stext == TEXTADDR
+ * swapper_pg_dir is the virtual address of the initial page table.
+ * We place the page tables 16K below KERNEL_RAM_ADDR.  Therefore, we must
+ * make sure that KERNEL_RAM_ADDR is correctly set.  Currently, we expect
+ * the least significant 16 bits to be 0x8000, but we could probably
+ * relax this restriction to KERNEL_RAM_ADDR >= PAGE_OFFSET + 0x4000.
  */
-#if (TEXTADDR & 0xffff) != 0x8000
-#error TEXTADDR must start at 0xXXXX8000
+#if (KERNEL_RAM_ADDR & 0xffff) != 0x8000
+#error KERNEL_RAM_ADDR must start at 0xXXXX8000
 #endif
 
 	.globl	swapper_pg_dir
-	.equ	swapper_pg_dir, TEXTADDR - 0x4000
+	.equ	swapper_pg_dir, KERNEL_RAM_ADDR - 0x4000
 
-	.macro	pgtbl, rd, phys
-	adr	\rd, stext
-	sub	\rd, \rd, #0x4000
+	.macro	pgtbl, rd
+	ldr	\rd, =(__virt_to_phys(KERNEL_RAM_ADDR - 0x4000))
 	.endm
-#else
-/*
- * XIP Kernel:
- *
- * We place the page tables 16K below DATAADDR.  Therefore, we must make sure
- * that DATAADDR is correctly set.  Currently, we expect the least significant
- * 16 bits to be 0x8000, but we could probably relax this restriction to
- * DATAADDR >= PAGE_OFFSET + 0x4000
- *
- * Note that pgtbl is meant to return the physical address of swapper_pg_dir.
- * We can't make it relative to the kernel position in this case since
- * the kernel can physically be anywhere.
- */
-#if (DATAADDR & 0xffff) != 0x8000
-#error DATAADDR must start at 0xXXXX8000
-#endif
-
-	.globl	swapper_pg_dir
-	.equ	swapper_pg_dir, DATAADDR - 0x4000
 
-	.macro	pgtbl, rd, phys
-	ldr	\rd, =((DATAADDR - 0x4000) - VIRT_OFFSET)
-	add	\rd, \rd, \phys
-	.endm
+#ifdef CONFIG_XIP_KERNEL
+#define TEXTADDR  XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+#else
+#define TEXTADDR  KERNEL_RAM_ADDR
 #endif
 
 /*
@@ -279,7 +256,7 @@ __turn_mmu_on:
 	.type	__create_page_tables, %function
 __create_page_tables:
 	ldr	r5, [r8, #MACHINFO_PHYSRAM]	@ physram
-	pgtbl	r4, r5				@ page table address
+	pgtbl	r4				@ page table address
 
 	/*
 	 * Clear the 16K level 1 swapper page table
@@ -324,7 +301,7 @@ __create_page_tables:
 	/*
 	 * Then map first 1MB of ram in case it contains our boot params.
 	 */
-	add	r0, r4, #VIRT_OFFSET >> 18
+	add	r0, r4, #PAGE_OFFSET >> 18
 	orr	r6, r5, r7
 	str	r6, [r0]
 
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 1a85cfdad5ac..6055e1427ba3 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -11,6 +11,7 @@
  */
 #include <linux/config.h>
 #include <linux/module.h>
+#include <linux/moduleloader.h>
 #include <linux/kernel.h>
 #include <linux/elf.h>
 #include <linux/vmalloc.h>
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index cd99b83f14c2..9bd8609a2926 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -782,7 +782,7 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat
 	return ret;
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
 {
 	struct task_struct *child;
 	int ret;
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index a94d75fef598..a917e3dd3666 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -139,93 +139,33 @@ struct iwmmxt_sigframe {
 	unsigned long	storage[0x98/4];
 };
 
-static int page_present(struct mm_struct *mm, void __user *uptr, int wr)
-{
-	unsigned long addr = (unsigned long)uptr;
-	pgd_t *pgd = pgd_offset(mm, addr);
-	if (pgd_present(*pgd)) {
-		pmd_t *pmd = pmd_offset(pgd, addr);
-		if (pmd_present(*pmd)) {
-			pte_t *pte = pte_offset_map(pmd, addr);
-			return (pte_present(*pte) && (!wr || pte_write(*pte)));
-		}
-	}
-	return 0;
-}
-
-static int copy_locked(void __user *uptr, void *kptr, size_t size, int write,
-		       void (*copyfn)(void *, void __user *))
-{
-	unsigned char v, __user *userptr = uptr;
-	int err = 0;
-
-	do {
-		struct mm_struct *mm;
-
-		if (write) {
-			__put_user_error(0, userptr, err);
-			__put_user_error(0, userptr + size - 1, err);
-		} else {
-			__get_user_error(v, userptr, err);
-			__get_user_error(v, userptr + size - 1, err);
-		}
-
-		if (err)
-			break;
-
-		mm = current->mm;
-		spin_lock(&mm->page_table_lock);
-		if (page_present(mm, userptr, write) &&
-		    page_present(mm, userptr + size - 1, write)) {
-		    	copyfn(kptr, uptr);
-		} else
-			err = 1;
-		spin_unlock(&mm->page_table_lock);
-	} while (err);
-
-	return err;
-}
-
 static int preserve_iwmmxt_context(struct iwmmxt_sigframe *frame)
 {
-	int err = 0;
+	char kbuf[sizeof(*frame) + 8];
+	struct iwmmxt_sigframe *kframe;
 
 	/* the iWMMXt context must be 64 bit aligned */
-	WARN_ON((unsigned long)frame & 7);
-
-	__put_user_error(IWMMXT_MAGIC0, &frame->magic0, err);
-	__put_user_error(IWMMXT_MAGIC1, &frame->magic1, err);
-
-	/*
-	 * iwmmxt_task_copy() doesn't check user permissions.
-	 * Let's do a dummy write on the upper boundary to ensure
-	 * access to user mem is OK all way up.
-	 */
-	err |= copy_locked(&frame->storage, current_thread_info(),
-			   sizeof(frame->storage), 1, iwmmxt_task_copy);
-	return err;
+	kframe = (struct iwmmxt_sigframe *)((unsigned long)(kbuf + 8) & ~7);
+	kframe->magic0 = IWMMXT_MAGIC0;
+	kframe->magic1 = IWMMXT_MAGIC1;
+	iwmmxt_task_copy(current_thread_info(), &kframe->storage);
+	return __copy_to_user(frame, kframe, sizeof(*frame));
 }
 
 static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
 {
-	unsigned long magic0, magic1;
-	int err = 0;
+	char kbuf[sizeof(*frame) + 8];
+	struct iwmmxt_sigframe *kframe;
 
-	/* the iWMMXt context is 64 bit aligned */
-	WARN_ON((unsigned long)frame & 7);
-
-	/*
-	 * Validate iWMMXt context signature.
-	 * Also, iwmmxt_task_restore() doesn't check user permissions.
-	 * Let's do a dummy write on the upper boundary to ensure
-	 * access to user mem is OK all way up.
-	 */
-	__get_user_error(magic0, &frame->magic0, err);
-	__get_user_error(magic1, &frame->magic1, err);
-	if (!err && magic0 == IWMMXT_MAGIC0 && magic1 == IWMMXT_MAGIC1)
-		err = copy_locked(&frame->storage, current_thread_info(),
-				  sizeof(frame->storage), 0, iwmmxt_task_restore);
-	return err;
+	/* the iWMMXt context must be 64 bit aligned */
+	kframe = (struct iwmmxt_sigframe *)((unsigned long)(kbuf + 8) & ~7);
+	if (__copy_from_user(kframe, frame, sizeof(*frame)))
+		return -1;
+	if (kframe->magic0 != IWMMXT_MAGIC0 ||
+	    kframe->magic1 != IWMMXT_MAGIC1)
+		return -1;
+	iwmmxt_task_restore(current_thread_info(), &kframe->storage);
+	return 0;
 }
 
 #endif
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 69449a818dcc..fc4729106a32 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -36,10 +36,6 @@
 #include <asm/thread_info.h>
 #include <asm/mach/time.h>
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 /*
  * Our system timer.
  */
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index f6de76e0a45d..45e9ea6cd2a5 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -198,25 +198,16 @@ void show_stack(struct task_struct *tsk, unsigned long *sp)
 	barrier();
 }
 
-DEFINE_SPINLOCK(die_lock);
-
-/*
- * This function is protected against re-entrancy.
- */
-NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
+static void __die(const char *str, int err, struct thread_info *thread, struct pt_regs *regs)
 {
-	struct task_struct *tsk = current;
+	struct task_struct *tsk = thread->task;
 	static int die_counter;
 
-	console_verbose();
-	spin_lock_irq(&die_lock);
-	bust_spinlocks(1);
-
 	printk("Internal error: %s: %x [#%d]\n", str, err, ++die_counter);
 	print_modules();
 	__show_regs(regs);
 	printk("Process %s (pid: %d, stack limit = 0x%p)\n",
-		tsk->comm, tsk->pid, tsk->thread_info + 1);
+		tsk->comm, tsk->pid, thread + 1);
 
 	if (!user_mode(regs) || in_interrupt()) {
 		dump_mem("Stack: ", regs->ARM_sp,
@@ -224,7 +215,21 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 		dump_backtrace(regs, tsk);
 		dump_instr(regs);
 	}
+}
+
+DEFINE_SPINLOCK(die_lock);
+
+/*
+ * This function is protected against re-entrancy.
+ */
+NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
+{
+	struct thread_info *thread = current_thread_info();
 
+	console_verbose();
+	spin_lock_irq(&die_lock);
+	bust_spinlocks(1);
+	__die(str, err, thread, regs);
 	bust_spinlocks(0);
 	spin_unlock_irq(&die_lock);
 	do_exit(SIGSEGV);
@@ -345,7 +350,9 @@ static int bad_syscall(int n, struct pt_regs *regs)
 	struct thread_info *thread = current_thread_info();
 	siginfo_t info;
 
-	if (current->personality != PER_LINUX && thread->exec_domain->handler) {
+	if (current->personality != PER_LINUX &&
+	    current->personality != PER_LINUX_32BIT &&
+	    thread->exec_domain->handler) {
 		thread->exec_domain->handler(n, regs);
 		return regs->ARM_r0;
 	}
@@ -481,29 +488,33 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 		unsigned long addr = regs->ARM_r2;
 		struct mm_struct *mm = current->mm;
 		pgd_t *pgd; pmd_t *pmd; pte_t *pte;
+		spinlock_t *ptl;
 
 		regs->ARM_cpsr &= ~PSR_C_BIT;
-		spin_lock(&mm->page_table_lock);
+		down_read(&mm->mmap_sem);
 		pgd = pgd_offset(mm, addr);
 		if (!pgd_present(*pgd))
 			goto bad_access;
 		pmd = pmd_offset(pgd, addr);
 		if (!pmd_present(*pmd))
 			goto bad_access;
-		pte = pte_offset_map(pmd, addr);
-		if (!pte_present(*pte) || !pte_write(*pte))
+		pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
+		if (!pte_present(*pte) || !pte_write(*pte)) {
+			pte_unmap_unlock(pte, ptl);
 			goto bad_access;
+		}
 		val = *(unsigned long *)addr;
 		val -= regs->ARM_r0;
 		if (val == 0) {
 			*(unsigned long *)addr = regs->ARM_r1;
 			regs->ARM_cpsr |= PSR_C_BIT;
 		}
-		spin_unlock(&mm->page_table_lock);
+		pte_unmap_unlock(pte, ptl);
+		up_read(&mm->mmap_sem);
 		return val;
 
 		bad_access:
-		spin_unlock(&mm->page_table_lock);
+		up_read(&mm->mmap_sem);
 		/* simulate a write access fault */
 		do_DataAbort(addr, 15 + (1 << 11), regs);
 		return -1;
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 0d5db5279c5c..80c8e4c8cefa 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -6,14 +6,23 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <linux/config.h>
 #include <asm/thread_info.h>
+#include <asm/memory.h>
 	
 OUTPUT_ARCH(arm)
 ENTRY(stext)
+
 #ifndef __ARMEB__
 jiffies = jiffies_64;
 #else
 jiffies = jiffies_64 + 4;
 #endif
+
+#ifdef CONFIG_XIP_KERNEL
+#define TEXTADDR  XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+#else
+#define TEXTADDR  KERNEL_RAM_ADDR
+#endif
+
 SECTIONS
 {
 	. = TEXTADDR;
@@ -95,7 +104,7 @@ SECTIONS
 
 #ifdef CONFIG_XIP_KERNEL
 	__data_loc = ALIGN(4);		/* location in binary */
-	. = DATAADDR;
+	. = KERNEL_RAM_ADDR;
 #else
 	. = ALIGN(THREAD_SIZE);
 	__data_loc = .;
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 8725d63e4219..71e5b99e519e 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -11,7 +11,7 @@ lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 		   strnlen_user.o strchr.o strrchr.o testchangebit.o  \
 		   testclearbit.o testsetbit.o uaccess.o getuser.o    \
 		   putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o   \
-		   ucmpdi2.o lib1funcs.o div64.o	              \
+		   ucmpdi2.o lib1funcs.o div64.o sha1.o               \
 		   io-readsb.o io-writesb.o io-readsl.o io-writesl.o
 
 ifeq ($(CONFIG_CPU_32v3),y)
diff --git a/arch/arm/lib/ashldi3.S b/arch/arm/lib/ashldi3.S
new file mode 100644
index 000000000000..561e20717b30
--- /dev/null
+++ b/arch/arm/lib/ashldi3.S
@@ -0,0 +1,48 @@
+/* Copyright 1995, 1996, 1998, 1999, 2000, 2003, 2004, 2005
+   Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file.  (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; see the file COPYING.  If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.  */
+
+
+#include <linux/linkage.h>
+
+#ifdef __ARMEB__
+#define al r1
+#define ah r0
+#else
+#define al r0
+#define ah r1
+#endif
+
+ENTRY(__ashldi3)
+
+	subs	r3, r2, #32
+	rsb	ip, r2, #32
+	movmi	ah, ah, lsl r2
+	movpl	ah, al, lsl r3
+	orrmi	ah, ah, al, lsr ip
+	mov	al, al, lsl r2
+	mov	pc, lr
+
diff --git a/arch/arm/lib/ashldi3.c b/arch/arm/lib/ashldi3.c
deleted file mode 100644
index b62875cfd8f8..000000000000
--- a/arch/arm/lib/ashldi3.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/* More subroutines needed by GCC output code on some machines.  */
-/* Compile this one with gcc.  */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with other files,
-   some of which are compiled with GCC, to produce an executable,
-   this library does not by itself cause the resulting executable
-   to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.
- */
-/* support functions required by the kernel. based on code from gcc-2.95.3 */
-/* I Molton	29/07/01 */
-
-#include "gcclib.h"
-
-s64 __ashldi3(s64 u, int b)
-{
-	DIunion w;
-	int bm;
-	DIunion uu;
-
-	if (b == 0)
-		return u;
-
-	uu.ll = u;
-
-	bm = (sizeof(s32) * BITS_PER_UNIT) - b;
-	if (bm <= 0) {
-		w.s.low = 0;
-		w.s.high = (u32) uu.s.low << -bm;
-	} else {
-		u32 carries = (u32) uu.s.low >> bm;
-		w.s.low = (u32) uu.s.low << b;
-		w.s.high = ((u32) uu.s.high << b) | carries;
-	}
-
-	return w.ll;
-}
diff --git a/arch/arm/lib/ashrdi3.S b/arch/arm/lib/ashrdi3.S
new file mode 100644
index 000000000000..86fb2a90c301
--- /dev/null
+++ b/arch/arm/lib/ashrdi3.S
@@ -0,0 +1,48 @@
+/* Copyright 1995, 1996, 1998, 1999, 2000, 2003, 2004, 2005
+   Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file.  (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; see the file COPYING.  If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.  */
+
+
+#include <linux/linkage.h>
+
+#ifdef __ARMEB__
+#define al r1
+#define ah r0
+#else
+#define al r0
+#define ah r1
+#endif
+
+ENTRY(__ashrdi3)
+
+	subs	r3, r2, #32
+	rsb	ip, r2, #32
+	movmi	al, al, lsr r2
+	movpl	al, ah, asr r3
+	orrmi	al, al, ah, lsl ip
+	mov	ah, ah, asr r2
+	mov	pc, lr
+
diff --git a/arch/arm/lib/ashrdi3.c b/arch/arm/lib/ashrdi3.c
deleted file mode 100644
index 9a8600a7543f..000000000000
--- a/arch/arm/lib/ashrdi3.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* More subroutines needed by GCC output code on some machines.  */
-/* Compile this one with gcc.  */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with other files,
-   some of which are compiled with GCC, to produce an executable,
-   this library does not by itself cause the resulting executable
-   to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.
- */
-/* support functions required by the kernel. based on code from gcc-2.95.3 */
-/* I Molton     29/07/01 */
-
-#include "gcclib.h"
-
-s64 __ashrdi3(s64 u, int b)
-{
-	DIunion w;
-	int bm;
-	DIunion uu;
-
-	if (b == 0)
-		return u;
-
-	uu.ll = u;
-
-	bm = (sizeof(s32) * BITS_PER_UNIT) - b;
-	if (bm <= 0) {
-		/* w.s.high = 1..1 or 0..0 */
-		w.s.high = uu.s.high >> (sizeof(s32) * BITS_PER_UNIT - 1);
-		w.s.low = uu.s.high >> -bm;
-	} else {
-		u32 carries = (u32) uu.s.high << bm;
-		w.s.high = uu.s.high >> b;
-		w.s.low = ((u32) uu.s.low >> b) | carries;
-	}
-
-	return w.ll;
-}
diff --git a/arch/arm/lib/gcclib.h b/arch/arm/lib/gcclib.h
deleted file mode 100644
index 8b6dcc656de7..000000000000
--- a/arch/arm/lib/gcclib.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* gcclib.h -- definitions for various functions 'borrowed' from gcc-2.95.3 */
-/* I Molton     29/07/01 */
-
-#include <linux/types.h>
-
-#define BITS_PER_UNIT	8
-#define SI_TYPE_SIZE	(sizeof(s32) * BITS_PER_UNIT)
-
-#ifdef __ARMEB__
-struct DIstruct {
-	s32 high, low;
-};
-#else
-struct DIstruct {
-	s32 low, high;
-};
-#endif
-
-typedef union {
-	struct DIstruct s;
-	s64 ll;
-} DIunion;
diff --git a/arch/arm/lib/lshrdi3.S b/arch/arm/lib/lshrdi3.S
new file mode 100644
index 000000000000..46c2ed19ec95
--- /dev/null
+++ b/arch/arm/lib/lshrdi3.S
@@ -0,0 +1,48 @@
+/* Copyright 1995, 1996, 1998, 1999, 2000, 2003, 2004, 2005
+   Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file.  (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; see the file COPYING.  If not, write to
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA.  */
+
+
+#include <linux/linkage.h>
+
+#ifdef __ARMEB__
+#define al r1
+#define ah r0
+#else
+#define al r0
+#define ah r1
+#endif
+
+ENTRY(__lshrdi3)
+
+	subs	r3, r2, #32
+	rsb	ip, r2, #32
+	movmi	al, al, lsr r2
+	movpl	al, ah, lsr r3
+	orrmi	al, al, ah, lsl ip
+	mov	ah, ah, lsr r2
+	mov	pc, lr
+
diff --git a/arch/arm/lib/lshrdi3.c b/arch/arm/lib/lshrdi3.c
deleted file mode 100644
index 3681f49d2b6e..000000000000
--- a/arch/arm/lib/lshrdi3.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/* More subroutines needed by GCC output code on some machines.  */
-/* Compile this one with gcc.  */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with other files,
-   some of which are compiled with GCC, to produce an executable,
-   this library does not by itself cause the resulting executable
-   to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.
- */
-/* support functions required by the kernel. based on code from gcc-2.95.3 */
-/* I Molton     29/07/01 */
-
-#include "gcclib.h"
-
-s64 __lshrdi3(s64 u, int b)
-{
-	DIunion w;
-	int bm;
-	DIunion uu;
-
-	if (b == 0)
-		return u;
-
-	uu.ll = u;
-
-	bm = (sizeof(s32) * BITS_PER_UNIT) - b;
-	if (bm <= 0) {
-		w.s.high = 0;
-		w.s.low = (u32) uu.s.high >> -bm;
-	} else {
-		u32 carries = (u32) uu.s.high << bm;
-		w.s.high = (u32) uu.s.high >> b;
-		w.s.low = ((u32) uu.s.low >> b) | carries;
-	}
-
-	return w.ll;
-}
diff --git a/arch/arm/lib/muldi3.S b/arch/arm/lib/muldi3.S
new file mode 100644
index 000000000000..c7fbdf005319
--- /dev/null
+++ b/arch/arm/lib/muldi3.S
@@ -0,0 +1,44 @@
+/*
+ *  linux/arch/arm/lib/muldi3.S
+ *
+ *  Author:     Nicolas Pitre
+ *  Created:    Oct 19, 2005
+ *  Copyright:  Monta Vista Software, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+#ifdef __ARMEB__
+#define xh r0
+#define xl r1
+#define yh r2
+#define yl r3
+#else
+#define xl r0
+#define xh r1
+#define yl r2
+#define yh r3
+#endif
+
+ENTRY(__muldi3)
+
+	mul	xh, yl, xh
+	mla	xh, xl, yh, xh
+	mov	ip, xl, asr #16
+	mov	yh, yl, asr #16
+	bic	xl, xl, ip, lsl #16
+	bic	yl, yl, yh, lsl #16
+	mla	xh, yh, ip, xh
+	mul	yh, xl, yh
+	mul	xl, yl, xl
+	mul	ip, yl, ip
+	adds	xl, xl, yh, lsl #16
+	adc	xh, xh, yh, lsr #16
+	adds	xl, xl, ip, lsl #16
+	adc	xh, xh, ip, lsr #16
+	mov	pc, lr
+
diff --git a/arch/arm/lib/muldi3.c b/arch/arm/lib/muldi3.c
deleted file mode 100644
index 0a3b93313f18..000000000000
--- a/arch/arm/lib/muldi3.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/* More subroutines needed by GCC output code on some machines.  */
-/* Compile this one with gcc.  */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with other files,
-   some of which are compiled with GCC, to produce an executable,
-   this library does not by itself cause the resulting executable
-   to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.
- */
-/* support functions required by the kernel. based on code from gcc-2.95.3 */
-/* I Molton     29/07/01 */
-
-#include "gcclib.h"
-
-#define umul_ppmm(xh, xl, a, b) \
-{register u32 __t0, __t1, __t2;                                     \
-  __asm__ ("%@ Inlined umul_ppmm					\n\
-        mov     %2, %5, lsr #16						\n\
-        mov     %0, %6, lsr #16						\n\
-        bic     %3, %5, %2, lsl #16					\n\
-        bic     %4, %6, %0, lsl #16					\n\
-        mul     %1, %3, %4						\n\
-        mul     %4, %2, %4						\n\
-        mul     %3, %0, %3						\n\
-        mul     %0, %2, %0						\n\
-        adds    %3, %4, %3						\n\
-        addcs   %0, %0, #65536						\n\
-        adds    %1, %1, %3, lsl #16					\n\
-        adc     %0, %0, %3, lsr #16"                                    \
-           : "=&r" ((u32) (xh)),                                    \
-             "=r" ((u32) (xl)),                                     \
-             "=&r" (__t0), "=&r" (__t1), "=r" (__t2)                    \
-           : "r" ((u32) (a)),                                       \
-             "r" ((u32) (b)));}
-
-#define __umulsidi3(u, v) \
-  ({DIunion __w;                                                        \
-    umul_ppmm (__w.s.high, __w.s.low, u, v);                            \
-    __w.ll; })
-
-s64 __muldi3(s64 u, s64 v)
-{
-	DIunion w;
-	DIunion uu, vv;
-
-	uu.ll = u, vv.ll = v;
-
-	w.ll = __umulsidi3(uu.s.low, vv.s.low);
-	w.s.high += ((u32) uu.s.low * (u32) vv.s.high
-		     + (u32) uu.s.high * (u32) vv.s.low);
-
-	return w.ll;
-}
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
new file mode 100644
index 000000000000..ff6ece487ffc
--- /dev/null
+++ b/arch/arm/lib/sha1.S
@@ -0,0 +1,206 @@
+/*
+ *  linux/arch/arm/lib/sha1.S
+ *
+ *  SHA transform optimized for ARM
+ *
+ *  Copyright:	(C) 2005 by Nicolas Pitre <nico@cam.org>
+ *  Created:	September 17, 2005
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  The reference implementation for this code is linux/lib/sha1.c
+ */
+
+#include <linux/linkage.h>
+
+	.text
+
+
+/*
+ * void sha_transform(__u32 *digest, const char *in, __u32 *W)
+ *
+ * Note: the "in" ptr may be unaligned.
+ */
+
+ENTRY(sha_transform)
+
+	stmfd	sp!, {r4 - r8, lr}
+
+	@ for (i = 0; i < 16; i++)
+	@         W[i] = be32_to_cpu(in[i]); */
+
+#ifdef __ARMEB__
+	mov	r4, r0
+	mov	r0, r2
+	mov	r2, #64
+	bl	memcpy
+	mov	r2, r0
+	mov	r0, r4
+#else
+	mov	r3, r2
+	mov	lr, #16
+1:	ldrb	r4, [r1], #1
+	ldrb	r5, [r1], #1
+	ldrb	r6, [r1], #1
+	ldrb	r7, [r1], #1
+	subs	lr, lr, #1
+	orr	r5, r5, r4, lsl #8
+	orr	r6, r6, r5, lsl #8
+	orr	r7, r7, r6, lsl #8
+	str	r7, [r3], #4
+	bne	1b
+#endif
+
+	@ for (i = 0; i < 64; i++)
+	@         W[i+16] = ror(W[i+13] ^ W[i+8] ^ W[i+2] ^ W[i], 31);
+
+	sub	r3, r2, #4
+	mov	lr, #64
+2:	ldr	r4, [r3, #4]!
+	subs	lr, lr, #1
+	ldr	r5, [r3, #8]
+	ldr	r6, [r3, #32]
+	ldr	r7, [r3, #52]
+	eor	r4, r4, r5
+	eor	r4, r4, r6
+	eor	r4, r4, r7
+	mov	r4, r4, ror #31
+	str	r4, [r3, #64]
+	bne	2b
+
+	/*
+	 * The SHA functions are:
+	 *
+	 * f1(B,C,D) = (D ^ (B & (C ^ D)))
+	 * f2(B,C,D) = (B ^ C ^ D)
+	 * f3(B,C,D) = ((B & C) | (D & (B | C)))
+	 *
+	 * Then the sub-blocks are processed as follows:
+	 *
+	 * A' = ror(A, 27) + f(B,C,D) + E + K + *W++
+	 * B' = A
+	 * C' = ror(B, 2)
+	 * D' = C
+	 * E' = D
+	 *
+	 * We therefore unroll each loop 5 times to avoid register shuffling.
+	 * Also the ror for C (and also D and E which are successivelyderived
+	 * from it) is applied in place to cut on an additional mov insn for
+	 * each round.
+	 */
+
+	.macro	sha_f1, A, B, C, D, E
+	ldr	r3, [r2], #4
+	eor	ip, \C, \D
+	add	\E, r1, \E, ror #2
+	and	ip, \B, ip, ror #2
+	add	\E, \E, \A, ror #27
+	eor	ip, ip, \D, ror #2
+	add	\E, \E, r3
+	add	\E, \E, ip
+	.endm
+
+	.macro	sha_f2, A, B, C, D, E
+	ldr	r3, [r2], #4
+	add	\E, r1, \E, ror #2
+	eor	ip, \B, \C, ror #2
+	add	\E, \E, \A, ror #27
+	eor	ip, ip, \D, ror #2
+	add	\E, \E, r3
+	add	\E, \E, ip
+	.endm
+
+	.macro	sha_f3, A, B, C, D, E
+	ldr	r3, [r2], #4
+	add	\E, r1, \E, ror #2
+	orr	ip, \B, \C, ror #2
+	add	\E, \E, \A, ror #27
+	and	ip, ip, \D, ror #2
+	add	\E, \E, r3
+	and	r3, \B, \C, ror #2
+	orr	ip, ip, r3
+	add	\E, \E, ip
+	.endm
+
+	ldmia	r0, {r4 - r8}
+
+	mov	lr, #4
+	ldr	r1, .L_sha_K + 0
+
+	/* adjust initial values */
+	mov	r6, r6, ror #30
+	mov	r7, r7, ror #30
+	mov	r8, r8, ror #30
+
+3:	subs	lr, lr, #1
+	sha_f1	r4, r5, r6, r7, r8
+	sha_f1	r8, r4, r5, r6, r7
+	sha_f1	r7, r8, r4, r5, r6
+	sha_f1	r6, r7, r8, r4, r5
+	sha_f1	r5, r6, r7, r8, r4
+	bne	3b
+
+	ldr	r1, .L_sha_K + 4
+	mov	lr, #4
+
+4:	subs	lr, lr, #1
+	sha_f2	r4, r5, r6, r7, r8
+	sha_f2	r8, r4, r5, r6, r7
+	sha_f2	r7, r8, r4, r5, r6
+	sha_f2	r6, r7, r8, r4, r5
+	sha_f2	r5, r6, r7, r8, r4
+	bne	4b
+
+	ldr	r1, .L_sha_K + 8
+	mov	lr, #4
+
+5:	subs	lr, lr, #1
+	sha_f3	r4, r5, r6, r7, r8
+	sha_f3	r8, r4, r5, r6, r7
+	sha_f3	r7, r8, r4, r5, r6
+	sha_f3	r6, r7, r8, r4, r5
+	sha_f3	r5, r6, r7, r8, r4
+	bne	5b
+
+	ldr	r1, .L_sha_K + 12
+	mov	lr, #4
+
+6:	subs	lr, lr, #1
+	sha_f2	r4, r5, r6, r7, r8
+	sha_f2	r8, r4, r5, r6, r7
+	sha_f2	r7, r8, r4, r5, r6
+	sha_f2	r6, r7, r8, r4, r5
+	sha_f2	r5, r6, r7, r8, r4
+	bne	6b
+
+	ldmia	r0, {r1, r2, r3, ip, lr}
+	add	r4, r1, r4
+	add	r5, r2, r5
+	add	r6, r3, r6, ror #2
+	add	r7, ip, r7, ror #2
+	add	r8, lr, r8, ror #2
+	stmia	r0, {r4 - r8}
+
+	ldmfd	sp!, {r4 - r8, pc}
+
+.L_sha_K:
+	.word	0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
+
+
+/*
+ * void sha_init(__u32 *buf)
+ */
+
+.L_sha_initial_digest:
+	.word	0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0
+
+ENTRY(sha_init)
+
+	str	lr, [sp, #-4]!
+	adr	r1, .L_sha_initial_digest
+	ldmia	r1, {r1, r2, r3, ip, lr}
+	stmia	r0, {r1, r2, r3, ip, lr}
+	ldr	pc, [sp], #4
+
diff --git a/arch/arm/lib/ucmpdi2.S b/arch/arm/lib/ucmpdi2.S
new file mode 100644
index 000000000000..112630f93e5d
--- /dev/null
+++ b/arch/arm/lib/ucmpdi2.S
@@ -0,0 +1,35 @@
+/*
+ *  linux/arch/arm/lib/ucmpdi2.S
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Oct 19, 2005
+ *  Copyright:	Monta Vista Software, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+#ifdef __ARMEB__
+#define xh r0
+#define xl r1
+#define yh r2
+#define yl r3
+#else
+#define xl r0
+#define xh r1
+#define yl r2
+#define yh r3
+#endif
+
+ENTRY(__ucmpdi2)
+
+	cmp	xh, yh
+	cmpeq	xl, yl
+	movlo	r0, #0
+	moveq	r0, #1
+	movhi	r0, #2
+	mov	pc, lr
+
diff --git a/arch/arm/lib/ucmpdi2.c b/arch/arm/lib/ucmpdi2.c
deleted file mode 100644
index 57f3f2df3850..000000000000
--- a/arch/arm/lib/ucmpdi2.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* More subroutines needed by GCC output code on some machines.  */
-/* Compile this one with gcc.  */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with other files,
-   some of which are compiled with GCC, to produce an executable,
-   this library does not by itself cause the resulting executable
-   to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.
- */
-/* support functions required by the kernel. based on code from gcc-2.95.3 */
-/* I Molton     29/07/01 */
-
-#include "gcclib.h"
-
-int __ucmpdi2(s64 a, s64 b)
-{
-	DIunion au, bu;
-
-	au.ll = a, bu.ll = b;
-
-	if ((u32) au.s.high < (u32) bu.s.high)
-		return 0;
-	else if ((u32) au.s.high > (u32) bu.s.high)
-		return 2;
-	if ((u32) au.s.low < (u32) bu.s.low)
-		return 0;
-	else if ((u32) au.s.low > (u32) bu.s.low)
-		return 2;
-	return 1;
-}
diff --git a/arch/arm/mach-aaec2000/Makefile b/arch/arm/mach-aaec2000/Makefile
index 20ec83896c37..a8e462f58bc9 100644
--- a/arch/arm/mach-aaec2000/Makefile
+++ b/arch/arm/mach-aaec2000/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support (must be linked before board specific support)
-obj-y += core.o
+obj-y += core.o clock.o
 
 # Specific board support
 obj-$(CONFIG_MACH_AAED2000) += aaed2000.o
diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c
index c9d899886648..f5ef69702296 100644
--- a/arch/arm/mach-aaec2000/aaed2000.c
+++ b/arch/arm/mach-aaec2000/aaed2000.c
@@ -27,16 +27,65 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <asm/arch/aaed2000.h>
+
 #include "core.h"
 
+static void aaed2000_clcd_disable(struct clcd_fb *fb)
+{
+	AAED_EXT_GPIO &= ~AAED_EGPIO_LCD_PWR_EN;
+}
+
+static void aaed2000_clcd_enable(struct clcd_fb *fb)
+{
+	AAED_EXT_GPIO |= AAED_EGPIO_LCD_PWR_EN;
+}
+
+struct aaec2000_clcd_info clcd_info = {
+	.enable = aaed2000_clcd_enable,
+	.disable = aaed2000_clcd_disable,
+	.panel = {
+		.mode	= {
+			.name		= "Sharp",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 39721,
+			.left_margin	= 20,
+			.right_margin	= 44,
+			.upper_margin	= 21,
+			.lower_margin	= 34,
+			.hsync_len	= 96,
+			.vsync_len	= 2,
+			.sync		= 0,
+			.vmode	= FB_VMODE_NONINTERLACED,
+		},
+		.width	= -1,
+		.height	= -1,
+		.tim2	= TIM2_IVS | TIM2_IHS,
+		.cntl	= CNTL_LCDTFT,
+		.bpp	= 16,
+	},
+};
+
 static void __init aaed2000_init_irq(void)
 {
 	aaec2000_init_irq();
 }
 
+static void __init aaed2000_init(void)
+{
+	aaec2000_set_clcd_plat_data(&clcd_info);
+}
+
+static struct map_desc aaed2000_io_desc[] __initdata = {
+  { EXT_GPIO_VBASE, EXT_GPIO_PBASE, EXT_GPIO_LENGTH, MT_DEVICE }, /* Ext GPIO */
+};
+
 static void __init aaed2000_map_io(void)
 {
 	aaec2000_map_io();
+	iotable_init(aaed2000_io_desc, ARRAY_SIZE(aaed2000_io_desc));
 }
 
 MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
@@ -47,4 +96,5 @@ MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
 	.map_io		= aaed2000_map_io,
 	.init_irq	= aaed2000_init_irq,
 	.timer		= &aaec2000_timer,
+	.init_machine	= aaed2000_init,
 MACHINE_END
diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c
new file mode 100644
index 000000000000..99e019169dda
--- /dev/null
+++ b/arch/arm/mach-aaec2000/clock.c
@@ -0,0 +1,110 @@
+/*
+ *  linux/arch/arm/mach-aaec2000/clock.c
+ *
+ *  Copyright (C) 2005 Nicolas Bellido Y Ortega
+ *
+ *  Based on linux/arch/arm/mach-integrator/clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <asm/semaphore.h>
+#include <asm/hardware/clock.h>
+
+#include "clock.h"
+
+static LIST_HEAD(clocks);
+static DECLARE_MUTEX(clocks_sem);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *p, *clk = ERR_PTR(-ENOENT);
+
+	down(&clocks_sem);
+	list_for_each_entry(p, &clocks, node) {
+		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+			clk = p;
+			break;
+		}
+	}
+	up(&clocks_sem);
+
+	return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+	module_put(clk->owner);
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+int clk_use(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_use);
+
+void clk_unuse(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_unuse);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_register(struct clk *clk)
+{
+	down(&clocks_sem);
+	list_add(&clk->node, &clocks);
+	up(&clocks_sem);
+	return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+	down(&clocks_sem);
+	list_del(&clk->node);
+	up(&clocks_sem);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+static int __init clk_init(void)
+{
+	return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-aaec2000/clock.h b/arch/arm/mach-aaec2000/clock.h
new file mode 100644
index 000000000000..d4bb74ff613f
--- /dev/null
+++ b/arch/arm/mach-aaec2000/clock.h
@@ -0,0 +1,23 @@
+/*
+ *  linux/arch/arm/mach-aaec2000/clock.h
+ *
+ *  Copyright (C) 2005 Nicolas Bellido Y Ortega
+ *
+ *  Based on linux/arch/arm/mach-integrator/clock.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+struct module;
+
+struct clk {
+	struct list_head	node;
+	unsigned long		rate;
+	struct module		*owner;
+	const char		*name;
+	void			*data;
+};
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index aece0cd4f0a3..0c53dab80905 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -13,19 +13,27 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/device.h>
 #include <linux/list.h>
 #include <linux/errno.h>
+#include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/timex.h>
 #include <linux/signal.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/hardware/amba.h>
 
+#include <asm/mach/flash.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 
+#include "core.h"
+#include "clock.h"
+
 /*
  * Common I/O mapping:
  *
@@ -40,9 +48,17 @@
  * default mapping provided here.
  */
 static struct map_desc standard_io_desc[] __initdata = {
- /* virtual         physical       length           type */
-  { VIO_APB_BASE,   PIO_APB_BASE,  IO_APB_LENGTH,   MT_DEVICE },
-  { VIO_AHB_BASE,   PIO_AHB_BASE,  IO_AHB_LENGTH,   MT_DEVICE }
+	{
+		.virtual	= VIO_APB_BASE,
+		.physical	= __phys_to_pfn(PIO_APB_BASE),
+		.length		= IO_APB_LENGTH,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VIO_AHB_BASE,
+		.physical	= __phys_to_pfn(PIO_AHB_BASE),
+		.length		= IO_AHB_LENGTH,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init aaec2000_map_io(void)
@@ -155,3 +171,116 @@ struct sys_timer aaec2000_timer = {
 	.offset		= aaec2000_gettimeoffset,
 };
 
+static struct clcd_panel mach_clcd_panel;
+
+static int aaec2000_clcd_setup(struct clcd_fb *fb)
+{
+	dma_addr_t dma;
+
+	fb->panel = &mach_clcd_panel;
+
+	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, SZ_1M,
+			&dma, GFP_KERNEL);
+
+	if (!fb->fb.screen_base) {
+		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
+		return -ENOMEM;
+	}
+
+	fb->fb.fix.smem_start = dma;
+	fb->fb.fix.smem_len = SZ_1M;
+
+	return 0;
+}
+
+static int aaec2000_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	return dma_mmap_writecombine(&fb->dev->dev, vma,
+			fb->fb.screen_base,
+			fb->fb.fix.smem_start,
+			fb->fb.fix.smem_len);
+}
+
+static void aaec2000_clcd_remove(struct clcd_fb *fb)
+{
+	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+			fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+static struct clcd_board clcd_plat_data = {
+	.name	= "AAEC-2000",
+	.check	= clcdfb_check,
+	.decode	= clcdfb_decode,
+	.setup	= aaec2000_clcd_setup,
+	.mmap	= aaec2000_clcd_mmap,
+	.remove	= aaec2000_clcd_remove,
+};
+
+static struct amba_device clcd_device = {
+	.dev		= {
+		.bus_id			= "mb:16",
+		.coherent_dma_mask	= ~0,
+		.platform_data		= &clcd_plat_data,
+	},
+	.res		= {
+		.start			= AAEC_CLCD_PHYS,
+		.end			= AAEC_CLCD_PHYS + SZ_4K - 1,
+		.flags			= IORESOURCE_MEM,
+	},
+	.irq		= { INT_LCD, NO_IRQ },
+	.periphid	= 0x41110,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	&clcd_device,
+};
+
+static struct clk aaec2000_clcd_clk = {
+	.name = "CLCDCLK",
+};
+
+void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *clcd)
+{
+	clcd_plat_data.enable = clcd->enable;
+	clcd_plat_data.disable = clcd->disable;
+	memcpy(&mach_clcd_panel, &clcd->panel, sizeof(struct clcd_panel));
+}
+
+static struct flash_platform_data aaec2000_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 4,
+};
+
+static struct resource aaec2000_flash_resource = {
+	.start		= AAEC_FLASH_BASE,
+	.end		= AAEC_FLASH_BASE + AAEC_FLASH_SIZE,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device aaec2000_flash_device = {
+	.name		= "armflash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &aaec2000_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &aaec2000_flash_resource,
+};
+
+static int __init aaec2000_init(void)
+{
+	int i;
+
+	clk_register(&aaec2000_clcd_clk);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+
+	platform_device_register(&aaec2000_flash_device);
+
+	return 0;
+};
+arch_initcall(aaec2000_init);
+
diff --git a/arch/arm/mach-aaec2000/core.h b/arch/arm/mach-aaec2000/core.h
index 91893d848c16..daefc0ea14a1 100644
--- a/arch/arm/mach-aaec2000/core.h
+++ b/arch/arm/mach-aaec2000/core.h
@@ -9,8 +9,19 @@
  *
  */
 
+#include <asm/hardware/amba_clcd.h>
+
 struct sys_timer;
 
 extern struct sys_timer aaec2000_timer;
 extern void __init aaec2000_map_io(void);
 extern void __init aaec2000_init_irq(void);
+
+struct aaec2000_clcd_info {
+	struct clcd_panel panel;
+	void (*disable)(struct clcd_fb *);
+	void (*enable)(struct clcd_fb *);
+};
+
+extern void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *);
+
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index 0793dcf54f2e..d5c155045762 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -69,6 +69,17 @@ config EP72XX_ROM_BOOT
 
 	  You almost surely want to say N here.
 
+config MACH_MP1000
+	bool "MACH_MP1000"
+	help
+	  Say Y if you intend to run the kernel on the Comdial MP1000 platform.
+
+config MP1000_90MHZ
+	bool "MP1000_90MHZ"
+	depends on MACH_MP1000
+	help
+	  Say Y if you have the MP1000 configured to be set at 90MHZ rather than 74MHZ
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index 4a197315f0cf..8a6dc1ccf8fe 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o
 obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
 obj-$(CONFIG_ARCH_EDB7211)  += edb7211-arch.o edb7211-mm.o
 obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
+obj-$(CONFIG_MACH_MP1000)   += mp1000-mach.o mp1000-mm.o mp1000-seprom.o
 obj-$(CONFIG_ARCH_P720T)    += p720t.o
 leds-$(CONFIG_ARCH_P720T)   += p720t-leds.o
 obj-$(CONFIG_LEDS)          += $(leds-y)
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index dc73feb1ffb0..43b9423d1440 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -46,10 +46,14 @@
 */
 
 static struct map_desc autcpu12_io_desc[] __initdata = {
- /* virtual, physical, length, type */
- /* memory-mapped extra io and CS8900A Ethernet chip */
- /* ethernet chip */
- 	{ AUTCPU12_VIRT_CS8900A, AUTCPU12_PHYS_CS8900A, SZ_1M, MT_DEVICE }
+	/* memory-mapped extra io and CS8900A Ethernet chip */
+ 	/* ethernet chip */
+ 	{
+		.virtual	= AUTCPU12_VIRT_CS8900A,
+		.pfn		= __phys_to_pfn(AUTCPU12_PHYS_CS8900A),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init autcpu12_map_io(void)
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index a46c82cd2711..cba7be5a06c3 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -39,7 +39,12 @@
  * ethernet driver, perhaps.
  */
 static struct map_desc cdb89712_io_desc[] __initdata = {
-	{ ETHER_BASE, ETHER_START, ETHER_SIZE, MT_DEVICE }
+	{
+		.virtual	= ETHER_BASE,
+		.pfn		=__phys_to_pfn(ETHER_START),
+		.length		= ETHER_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init cdb89712_map_io(void)
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 780d91805984..35d51a759b59 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -37,11 +37,13 @@
 #include "common.h"
 
 static struct map_desc ceiva_io_desc[] __initdata = {
- /* virtual, physical, length, type */
-
- /* SED1355 controlled video RAM & registers */
- { CEIVA_VIRT_SED1355, CEIVA_PHYS_SED1355, SZ_2M, MT_DEVICE }
-
+ 	/* SED1355 controlled video RAM & registers */
+ 	{
+		.virtual	= CEIVA_VIRT_SED1355,
+		.pfn		= __phys_to_pfn(CEIVA_PHYS_SED1355),
+		.length		= SZ_2M,
+		.type		= MT_DEVICE
+	}
 };
 
 
diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c
index 7fd7b01822d0..72f8bb05d55e 100644
--- a/arch/arm/mach-clps711x/edb7211-mm.c
+++ b/arch/arm/mach-clps711x/edb7211-mm.c
@@ -51,15 +51,27 @@ extern void clps711x_map_io(void);
  *     happens).
  */
 static struct map_desc edb7211_io_desc[] __initdata = {
- /* virtual, physical, length, type */
-
- /* memory-mapped extra keyboard row and CS8900A Ethernet chip */
- { EP7211_VIRT_EXTKBD,  EP7211_PHYS_EXTKBD,  SZ_1M, MT_DEVICE }, 
- { EP7211_VIRT_CS8900A, EP7211_PHYS_CS8900A, SZ_1M, MT_DEVICE },
-
- /* flash banks */
- { EP7211_VIRT_FLASH1,  EP7211_PHYS_FLASH1,  SZ_8M, MT_DEVICE },
- { EP7211_VIRT_FLASH2,  EP7211_PHYS_FLASH2,  SZ_8M, MT_DEVICE }
+ 	{	/* memory-mapped extra keyboard row */
+	 	.virtual 	= EP7211_VIRT_EXTKBD,
+		.pfn		= __phys_to_pfn(EP7211_PHYS_EXTKBD),
+		.length		= SZ_1M,
+		.type		- MT_DEVICE
+	}, {	/* and CS8900A Ethernet chip */
+		.virtual	= EP7211_VIRT_CS8900A,
+		.pfn		= __phys_to_pfn(EP7211_PHYS_CS8900A),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	}, { 	/* flash banks */
+		.virtual	= EP7211_VIRT_FLASH1,
+		.pfn		= __phys_to_pfn(EP7211_PHYS_FLASH1),
+		.length		= SZ_8M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= EP7211_VIRT_FLASH2,
+		.pfn		= __phys_to_pfn(EP7211_PHYS_FLASH2),
+		.length		= SZ_8M,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init edb7211_map_io(void)
diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c
index 120b7cac84b5..a00f77ef8df8 100644
--- a/arch/arm/mach-clps711x/mm.c
+++ b/arch/arm/mach-clps711x/mm.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/bootmem.h>
 
+#include <asm/sizes.h>
 #include <asm/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -34,7 +35,12 @@
  * This maps the generic CLPS711x registers
  */
 static struct map_desc clps711x_io_desc[] __initdata = {
- { CLPS7111_VIRT_BASE,	CLPS7111_PHYS_BASE,	1048576, MT_DEVICE }
+	{
+		.virtual	= CLPS7111_VIRT_BASE,
+		.pfn		= __phys_to_pfn(CLPS7111_PHYS_BASE),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init clps711x_map_io(void)
diff --git a/arch/arm/mach-clps711x/mp1000-mach.c b/arch/arm/mach-clps711x/mp1000-mach.c
new file mode 100644
index 000000000000..c2816bcde5e7
--- /dev/null
+++ b/arch/arm/mach-clps711x/mp1000-mach.c
@@ -0,0 +1,49 @@
+/*
+ *  linux/arch/arm/mach-mp1000/mp1000.c
+ *
+ *  Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/string.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/mp1000-seprom.h>
+
+#include "common.h"
+
+extern void mp1000_map_io(void);
+
+static void __init mp1000_init(void)
+{
+    seprom_init();
+}
+
+MACHINE_START(MP1000, "Comdial MP1000")
+	/* Maintainer: Jon Ringle */
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0015100,
+	.map_io		= mp1000_map_io,
+	.init_irq	= clps711x_init_irq,
+	.init_machine	= mp1000_init,
+	.timer		= &clps711x_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-clps711x/mp1000-mm.c b/arch/arm/mach-clps711x/mp1000-mm.c
new file mode 100644
index 000000000000..20e810b0ec0c
--- /dev/null
+++ b/arch/arm/mach-clps711x/mp1000-mm.c
@@ -0,0 +1,47 @@
+/*
+ *  linux/arch/arm/mach-mp1000/mm.c
+ *
+ *  Extra MM routines for the MP1000
+ *
+ *  Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/map.h>
+
+extern void clps711x_map_io(void);
+
+static struct map_desc mp1000_io_desc[] __initdata = {
+    { MP1000_EIO_BASE,	MP1000_EIO_START,	MP1000_EIO_SIZE, MT_DEVICE },
+    { MP1000_FIO_BASE,	MP1000_FIO_START,	MP1000_FIO_SIZE, MT_DEVICE },
+    { MP1000_LIO_BASE,	MP1000_LIO_START,	MP1000_LIO_SIZE, MT_DEVICE },
+    { MP1000_NIO_BASE,	MP1000_NIO_START,	MP1000_NIO_SIZE, MT_DEVICE },
+    { MP1000_IDE_BASE,	MP1000_IDE_START,	MP1000_IDE_SIZE, MT_DEVICE },
+    { MP1000_DSP_BASE,	MP1000_DSP_START,	MP1000_DSP_SIZE, MT_DEVICE }
+};
+
+void __init mp1000_map_io(void)
+{
+	clps711x_map_io();
+	iotable_init(mp1000_io_desc, ARRAY_SIZE(mp1000_io_desc));
+}
diff --git a/arch/arm/mach-clps711x/mp1000-seprom.c b/arch/arm/mach-clps711x/mp1000-seprom.c
new file mode 100644
index 000000000000..b22d0bebb851
--- /dev/null
+++ b/arch/arm/mach-clps711x/mp1000-seprom.c
@@ -0,0 +1,195 @@
+/*`
+ * mp1000-seprom.c
+ *
+ *  This file contains the Serial EEPROM code for the MP1000 board
+ *
+ *  Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/hardware.h>
+#include <asm/hardware/clps7111.h>
+#include <asm/arch/mp1000-seprom.h>
+
+/* If SepromInit() can initialize and checksum the seprom successfully, */
+/* then it will point seprom_data_ptr at the shadow copy.  */
+
+static eeprom_struct seprom_data;			/* shadow copy of seprom content */
+
+eeprom_struct *seprom_data_ptr = 0;		/* 0 => not initialized */
+
+/*
+ * Port D Bit 5 is Chip Select for EEPROM
+ * Port E Bit 0 is Input, Data out from EEPROM
+ * Port E Bit 1 is Output, Data in to EEPROM
+ * Port E Bit 2 is Output, CLK to EEPROM
+ */
+
+static char *port_d_ptr = (char *)(CLPS7111_VIRT_BASE + PDDR);
+static char *port_e_ptr = (char *)(CLPS7111_VIRT_BASE + PEDR);
+
+#define NO_OF_SHORTS	64	// Device is 64 x 16 bits
+#define ENABLE_RW	0
+#define DISABLE_RW	1
+
+static inline void toggle_seprom_clock(void)
+{
+	*port_e_ptr |= HwPortESepromCLK;
+	*port_e_ptr &= ~(HwPortESepromCLK);
+}
+
+static inline void select_eeprom(void)
+{
+	*port_d_ptr |= HwPortDEECS;
+	*port_e_ptr &= ~(HwPortESepromCLK);
+}
+
+static inline void deselect_eeprom(void)
+{
+	*port_d_ptr &= ~(HwPortDEECS);
+	*port_e_ptr &= ~(HwPortESepromDIn);
+}
+
+/*
+ * GetSepromDataPtr - returns pointer to shadow (RAM) copy of seprom
+ *                    and returns 0 if seprom is not initialized or
+ *                    has a checksum error.
+ */
+
+eeprom_struct* get_seprom_ptr(void)
+{
+	return seprom_data_ptr;
+}
+
+unsigned char* get_eeprom_mac_address(void)
+{
+	return seprom_data_ptr->variant.eprom_struct.mac_Address;
+}
+
+/*
+ * ReadSProm, Physically reads data from the Serial PROM
+ */
+static void read_sprom(short address, int length, eeprom_struct *buffer)
+{
+	short data = COMMAND_READ | (address & 0x3F);
+	short bit;
+	int i;
+
+	select_eeprom();
+
+	// Clock in 9 bits of the command
+	for (i = 0, bit = 0x100; i < 9; i++, bit >>= 1) {
+		if (data & bit)
+			*port_e_ptr |= HwPortESepromDIn;
+		else
+			*port_e_ptr &= ~(HwPortESepromDIn);
+
+		toggle_seprom_clock();
+	}
+
+	//
+	// Now read one or more shorts of data from the Seprom
+	//
+	while (length-- > 0) {
+		data = 0;
+
+		// Read 16 bits at a time
+		for (i = 0; i < 16; i++) {
+			data <<= 1;
+			toggle_seprom_clock();
+			data |= *port_e_ptr & HwPortESepromDOut;
+
+		}
+
+		buffer->variant.eprom_short_data[address++] = data;
+	}
+
+	deselect_eeprom();
+
+	return;
+}
+
+
+
+/*
+ * ReadSerialPROM
+ *
+ * Input: Pointer to array of 64 x 16 Bits
+ *
+ * Output: if no problem reading data is filled in
+ */
+static void read_serial_prom(eeprom_struct *data)
+{
+	read_sprom(0, 64, data);
+}
+
+
+//
+// Compute Serial EEPROM checksum
+//
+// Input: Pointer to struct with Eprom data
+//
+// Output: The computed Eprom checksum
+//
+static short compute_seprom_checksum(eeprom_struct *data)
+{
+	short checksum = 0;
+	int i;
+
+	for (i = 0; i < 126; i++) {
+		checksum += (short)data->variant.eprom_byte_data[i];
+	}
+
+	return((short)(0x5555 - (checksum & 0xFFFF)));
+}
+
+//
+// Make sure the data port bits for the SEPROM are correctly initialised
+//
+
+void __init seprom_init(void)
+{
+	short checksum;
+
+	// Init Port D
+	*(char *)(CLPS7111_VIRT_BASE + PDDDR) = 0x0;
+	*(char *)(CLPS7111_VIRT_BASE + PDDR) = 0x15;
+
+	// Init Port E
+	*(int *)(CLPS7111_VIRT_BASE + PEDDR) = 0x06;
+	*(int *)(CLPS7111_VIRT_BASE + PEDR) = 0x04;
+
+	//
+	// Make sure that EEPROM struct size never exceeds 128 bytes
+	//
+	if (sizeof(eeprom_struct) > 128) {
+		panic("Serial PROM struct size > 128, aborting read\n");
+	}
+
+	read_serial_prom(&seprom_data);
+
+	checksum = compute_seprom_checksum(&seprom_data);
+
+	if (checksum != seprom_data.variant.eprom_short_data[63]) {
+		panic("Serial EEPROM checksum failed\n");
+	}
+
+	seprom_data_ptr = &seprom_data;
+}
+
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index 5bdb90edf992..a1acb945fb51 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -29,6 +29,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/setup.h>
+#include <asm/sizes.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -42,8 +43,17 @@
  * We map both here.
  */
 static struct map_desc p720t_io_desc[] __initdata = {
-	{ SYSPLD_VIRT_BASE,	SYSPLD_PHYS_BASE, 1048576, MT_DEVICE },
-	{ 0xfe400000,		0x10400000,	  1048576, MT_DEVICE }
+	{
+		.virtual	= SYSPLD_VIRT_BASE,
+		.pfn		= __phys_to_pfn(SYSPLD_PHYS_BASE),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= 0xfe400000,
+		.pfn		= __phys_to_pfn(0x10400000),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index e216ab8b9e8f..0364ba4b539e 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -259,10 +259,27 @@ static void __init clps7500_init_irq(void)
 }
 
 static struct map_desc cl7500_io_desc[] __initdata = {
-	{ IO_BASE,	IO_START,	IO_SIZE,    MT_DEVICE },	/* IO space	*/
-	{ ISA_BASE,	ISA_START,	ISA_SIZE,   MT_DEVICE },	/* ISA space	*/
-	{ FLASH_BASE,	FLASH_START,	FLASH_SIZE, MT_DEVICE },	/* Flash	*/
-	{ LED_BASE,	LED_START,	LED_SIZE,   MT_DEVICE } 	/* LED		*/
+	{ 	/* IO space	*/
+		.virtual	= IO_BASE,
+		.pfn		= __phys_to_pfn(IO_START),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	}, {	/* ISA space	*/
+		.virtual	= ISA_BASE,
+		.pfn		= __phys_to_pfn(ISA_START),
+		.length		= ISA_SIZE,
+		.type		= MT_DEVICE
+	}, {	/* Flash	*/
+		.virtual	= FLASH_BASE,
+		.pfn		= __phys_to_pfn(FLASH_START),
+		.length		= FLASH_SIZE,
+		.type		= MT_DEVICE
+	}, {	/* LED		*/
+		.virtual	= LED_BASE,
+		.pfn		= __phys_to_pfn(LED_START),
+		.length		= LED_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init clps7500_map_io(void)
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 5aeadfd72143..15261646dcdd 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -76,16 +76,42 @@ static struct map_desc ebsa110_io_desc[] __initdata = {
 	/*
 	 * sparse external-decode ISAIO space
 	 */
-	{ IRQ_STAT,    TRICK4_PHYS, PGDIR_SIZE,  MT_DEVICE }, /* IRQ_STAT/IRQ_MCLR */
-	{ IRQ_MASK,    TRICK3_PHYS, PGDIR_SIZE,  MT_DEVICE }, /* IRQ_MASK/IRQ_MSET */
-	{ SOFT_BASE,   TRICK1_PHYS, PGDIR_SIZE,  MT_DEVICE }, /* SOFT_BASE */
-	{ PIT_BASE,    TRICK0_PHYS, PGDIR_SIZE,  MT_DEVICE }, /* PIT_BASE */
+	{	/* IRQ_STAT/IRQ_MCLR */
+		.virtual	= IRQ_STAT,
+		.pfn		= __phys_to_pfn(TRICK4_PHYS),
+		.length		= PGDIR_SIZE,
+		.type		= MT_DEVICE
+	}, {	/* IRQ_MASK/IRQ_MSET */
+		.virtual	= IRQ_MASK,
+		.pfn		= __phys_to_pfn(TRICK3_PHYS),
+		.length		= PGDIR_SIZE,
+		.type		= MT_DEVICE
+	}, {	/* SOFT_BASE */
+		.virtual	= SOFT_BASE,
+		.pfn		= __phys_to_pfn(TRICK1_PHYS),
+		.length		= PGDIR_SIZE,
+		.type		= MT_DEVICE
+	}, {	/* PIT_BASE */
+		.virtual	= PIT_BASE,
+		.pfn		= __phys_to_pfn(TRICK0_PHYS),
+		.length		= PGDIR_SIZE,
+		.type		= MT_DEVICE
+	},
 
 	/*
 	 * self-decode ISAIO space
 	 */
-	{ ISAIO_BASE,  ISAIO_PHYS,  ISAIO_SIZE,  MT_DEVICE },
-	{ ISAMEM_BASE, ISAMEM_PHYS, ISAMEM_SIZE, MT_DEVICE }
+	{
+		.virtual	= ISAIO_BASE,
+		.pfn		= __phys_to_pfn(ISAIO_PHYS),
+		.length		= ISAIO_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= ISAMEM_BASE,
+		.pfn		= __phys_to_pfn(ISAMEM_PHYS),
+		.length		= ISAMEM_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init ebsa110_map_io(void)
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
index ef7eb5dc91bd..c648bfb676a1 100644
--- a/arch/arm/mach-ebsa110/io.c
+++ b/arch/arm/mach-ebsa110/io.c
@@ -24,6 +24,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 
+#include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/page.h>
 
diff --git a/arch/arm/mach-epxa10db/mm.c b/arch/arm/mach-epxa10db/mm.c
index 2aa57fa46da3..e8832d0910ee 100644
--- a/arch/arm/mach-epxa10db/mm.c
+++ b/arch/arm/mach-epxa10db/mm.c
@@ -31,12 +31,37 @@
 /* Page table mapping for I/O region */
  
 static struct map_desc epxa10db_io_desc[] __initdata = {
- { IO_ADDRESS(EXC_REGISTERS_BASE),   EXC_REGISTERS_BASE,    SZ_16K, MT_DEVICE }, 
- { IO_ADDRESS(EXC_PLD_BLOCK0_BASE),  EXC_PLD_BLOCK0_BASE,   SZ_16K, MT_DEVICE }, 
- { IO_ADDRESS(EXC_PLD_BLOCK1_BASE),  EXC_PLD_BLOCK1_BASE,   SZ_16K, MT_DEVICE }, 
- { IO_ADDRESS(EXC_PLD_BLOCK2_BASE),  EXC_PLD_BLOCK2_BASE,   SZ_16K, MT_DEVICE }, 
- { IO_ADDRESS(EXC_PLD_BLOCK3_BASE),  EXC_PLD_BLOCK3_BASE,   SZ_16K, MT_DEVICE }, 
- { FLASH_VADDR(EXC_EBI_BLOCK0_BASE), EXC_EBI_BLOCK0_BASE,   SZ_16M, MT_DEVICE }
+	{
+		.virtual	= IO_ADDRESS(EXC_REGISTERS_BASE),
+		.pfn		= __phys_to_pfn(EXC_REGISTERS_BASE),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(EXC_PLD_BLOCK0_BASE),
+		.pfn		= __phys_to_pfn(EXC_PLD_BLOCK0_BASE),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(EXC_PLD_BLOCK1_BASE),
+		.pfn		=__phys_to_pfn(EXC_PLD_BLOCK1_BASE),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(EXC_PLD_BLOCK2_BASE),
+		.physical	= __phys_to_pfn(EXC_PLD_BLOCK2_BASE),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(EXC_PLD_BLOCK3_BASE),
+		.pfn		= __phys_to_pfn(EXC_PLD_BLOCK3_BASE),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= FLASH_VADDR(EXC_EBI_BLOCK0_BASE),
+		.pfn		= __phys_to_pfn(EXC_EBI_BLOCK0_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init epxa10db_map_io(void)
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index eb8238c1ef06..dc09fd200c16 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -130,8 +130,17 @@ void __init footbridge_init_irq(void)
  * it means that we have extra bullet protection on our feet.
  */
 static struct map_desc fb_common_io_desc[] __initdata = {
- { ARMCSR_BASE,	 DC21285_ARMCSR_BASE,	    ARMCSR_SIZE,  MT_DEVICE },
- { XBUS_BASE,    0x40000000,		    XBUS_SIZE,    MT_DEVICE }
+	{
+		.virtual	= ARMCSR_BASE,
+		.pfn		= DC21285_ARMCSR_BASE,
+		.length		= ARMCSR_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= XBUS_BASE,
+		.pfn		= __phys_to_pfn(0x40000000),
+		.length		= XBUS_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 /*
@@ -140,11 +149,32 @@ static struct map_desc fb_common_io_desc[] __initdata = {
  */
 static struct map_desc ebsa285_host_io_desc[] __initdata = {
 #if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST)
- { PCIMEM_BASE,  DC21285_PCI_MEM,	    PCIMEM_SIZE,  MT_DEVICE },
- { PCICFG0_BASE, DC21285_PCI_TYPE_0_CONFIG, PCICFG0_SIZE, MT_DEVICE },
- { PCICFG1_BASE, DC21285_PCI_TYPE_1_CONFIG, PCICFG1_SIZE, MT_DEVICE },
- { PCIIACK_BASE, DC21285_PCI_IACK,	    PCIIACK_SIZE, MT_DEVICE },
- { PCIO_BASE,    DC21285_PCI_IO,	    PCIO_SIZE,	  MT_DEVICE }
+	{
+		.virtual	= PCIMEM_BASE,
+		.pfn		= __phys_to_pfn(DC21285_PCI_MEM),
+		.length		= PCIMEM_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= PCICFG0_BASE,
+		.pfn		= __phys_to_pfn(DC21285_PCI_TYPE_0_CONFIG),
+		.length		= PCICFG0_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= PCICFG1_BASE,
+		.pfn		= __phys_to_pfn(DC21285_PCI_TYPE_1_CONFIG),
+		.length		= PCICFG1_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= PCIIACK_BASE,
+		.pfn		= __phys_to_pfn(DC21285_PCI_IACK),
+		.length		= PCIIACK_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= PCIO_BASE,
+		.pfn		= __phys_to_pfn(DC21285_PCI_IO),
+		.length		= PCIO_SIZE,
+		.type		= MT_DEVICE
+	}
 #endif
 };
 
@@ -153,8 +183,17 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = {
  */
 static struct map_desc co285_io_desc[] __initdata = {
 #ifdef CONFIG_ARCH_CO285
- { PCIO_BASE,	 DC21285_PCI_IO,	    PCIO_SIZE,    MT_DEVICE },
- { PCIMEM_BASE,	 DC21285_PCI_MEM,	    PCIMEM_SIZE,  MT_DEVICE }
+	{
+		.virtual	= PCIO_BASE,
+		.pfn		= __phys_to_pfn(DC21285_PCI_IO),
+		.length		= PCIO_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= PCIMEM_BASE,
+		.pfn		= __phys_to_pfn(DC21285_PCI_MEM),
+		.length		= PCIMEM_SIZE,
+		.type		= MT_DEVICE
+	}
 #endif
 };
 
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 5110e2e65ddd..c096b4569308 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -237,7 +237,12 @@ void __init h720x_init_irq (void)
 }
 
 static struct map_desc h720x_io_desc[] __initdata = {
-	{ IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE },
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
 };
 
 /* Initialize io tables */
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index f8a742bb2d5b..837d7f0bda4c 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -26,6 +26,8 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/string.h>
+
 #include <asm/arch/imxfb.h>
 #include <asm/hardware.h>
 #include <asm/arch/imx-regs.h>
@@ -273,8 +275,12 @@ static struct platform_device *devices[] __initdata = {
 };
 
 static struct map_desc imx_io_desc[] __initdata = {
-	/* virtual     physical    length      type */
-	{IMX_IO_BASE, IMX_IO_PHYS, IMX_IO_SIZE, MT_DEVICE},
+	{
+		.virtual	= IMX_IO_BASE,
+		.pfn		= __phys_to_pfn(IMX_IO_PHYS),
+		.length		= IMX_IO_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index a7511ddfe364..4cbdc1fe04b1 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -61,13 +61,37 @@ mx1ads_init(void)
 }
 
 static struct map_desc mx1ads_io_desc[] __initdata = {
-	/* virtual     physical    length      type */
-	{IMX_CS0_VIRT, IMX_CS0_PHYS, IMX_CS0_SIZE, MT_DEVICE},
-	{IMX_CS1_VIRT, IMX_CS1_PHYS, IMX_CS1_SIZE, MT_DEVICE},
-	{IMX_CS2_VIRT, IMX_CS2_PHYS, IMX_CS2_SIZE, MT_DEVICE},
-	{IMX_CS3_VIRT, IMX_CS3_PHYS, IMX_CS3_SIZE, MT_DEVICE},
-	{IMX_CS4_VIRT, IMX_CS4_PHYS, IMX_CS4_SIZE, MT_DEVICE},
-	{IMX_CS5_VIRT, IMX_CS5_PHYS, IMX_CS5_SIZE, MT_DEVICE},
+	{
+		.virtual	= IMX_CS0_VIRT,
+		.pfn		= __phys_to_pfn(IMX_CS0_PHYS),
+		.length		= IMX_CS0_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IMX_CS1_VIRT,
+		.pfn		= __phys_to_pfn(IMX_CS1_PHYS),
+		.length		= IMX_CS1_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IMX_CS2_VIRT,
+		.pfn		= __phys_to_pfn(IMX_CS2_PHYS),
+		.length		= IMX_CS2_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IMX_CS3_VIRT,
+		.pfn		= __phys_to_pfn(IMX_CS3_PHYS),
+		.length		= IMX_CS3_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IMX_CS4_VIRT,
+		.pfn		= __phys_to_pfn(IMX_CS4_PHYS),
+		.length		= IMX_CS4_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IMX_CS5_VIRT,
+		.pfn		= __phys_to_pfn(IMX_CS5_PHYS),
+		.length		= IMX_CS5_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init
diff --git a/arch/arm/mach-integrator/clock.c b/arch/arm/mach-integrator/clock.c
index 56200594db3c..73c360685cad 100644
--- a/arch/arm/mach-integrator/clock.c
+++ b/arch/arm/mach-integrator/clock.c
@@ -13,6 +13,7 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/string.h>
 
 #include <asm/semaphore.h>
 #include <asm/hardware/clock.h>
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 36e2b6eb67b7..764ceb49470a 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -30,6 +30,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
+#include <asm/param.h>		/* HZ */
 #include <asm/mach-types.h>
 #include <asm/hardware/amba.h>
 #include <asm/hardware/amba_kmi.h>
@@ -75,19 +76,72 @@
  */
 
 static struct map_desc ap_io_desc[] __initdata = {
- { IO_ADDRESS(INTEGRATOR_HDR_BASE),   INTEGRATOR_HDR_BASE,   SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_SC_BASE),    INTEGRATOR_SC_BASE,    SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_EBI_BASE),   INTEGRATOR_EBI_BASE,   SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_CT_BASE),    INTEGRATOR_CT_BASE,    SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_IC_BASE),    INTEGRATOR_IC_BASE,    SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART0_BASE), INTEGRATOR_UART0_BASE, SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_DBG_BASE),   INTEGRATOR_DBG_BASE,   SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_GPIO_BASE),  INTEGRATOR_GPIO_BASE,  SZ_4K,  MT_DEVICE },
- { PCI_MEMORY_VADDR,                  PHYS_PCI_MEM_BASE,     SZ_16M, MT_DEVICE },
- { PCI_CONFIG_VADDR,                  PHYS_PCI_CONFIG_BASE,  SZ_16M, MT_DEVICE },
- { PCI_V3_VADDR,                      PHYS_PCI_V3_BASE,      SZ_64K, MT_DEVICE },
- { PCI_IO_VADDR,                      PHYS_PCI_IO_BASE,      SZ_64K, MT_DEVICE }
+	{
+		.virtual	= IO_ADDRESS(INTEGRATOR_HDR_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_HDR_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_SC_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_SC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_EBI_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_EBI_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_CT_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_CT_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_IC_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_IC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_UART0_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_UART1_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_UART1_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_DBG_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_DBG_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_GPIO_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= PCI_MEMORY_VADDR,
+		.pfn		= __phys_to_pfn(PHYS_PCI_MEM_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= PCI_CONFIG_VADDR,
+		.pfn		= __phys_to_pfn(PHYS_PCI_CONFIG_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= PCI_V3_VADDR,
+		.pfn		= __phys_to_pfn(PHYS_PCI_V3_BASE),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= PCI_IO_VADDR,
+		.pfn		= __phys_to_pfn(PHYS_PCI_IO_BASE),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init ap_map_io(void)
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 2be5c03ab87f..aa34c58b96c4 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -74,17 +74,62 @@
  */
 
 static struct map_desc intcp_io_desc[] __initdata = {
- { IO_ADDRESS(INTEGRATOR_HDR_BASE),   INTEGRATOR_HDR_BASE,   SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_SC_BASE),    INTEGRATOR_SC_BASE,    SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_EBI_BASE),   INTEGRATOR_EBI_BASE,   SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_CT_BASE),    INTEGRATOR_CT_BASE,    SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_IC_BASE),    INTEGRATOR_IC_BASE,    SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART0_BASE), INTEGRATOR_UART0_BASE, SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_DBG_BASE),   INTEGRATOR_DBG_BASE,   SZ_4K,  MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_GPIO_BASE),  INTEGRATOR_GPIO_BASE,  SZ_4K,  MT_DEVICE },
- { 0xfca00000, 0xca000000, SZ_4K, MT_DEVICE },
- { 0xfcb00000, 0xcb000000, SZ_4K, MT_DEVICE },
+	{
+		.virtual	= IO_ADDRESS(INTEGRATOR_HDR_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_HDR_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_SC_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_SC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_EBI_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_EBI_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_CT_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_CT_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_IC_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_IC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_UART0_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_UART1_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_UART1_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_DBG_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_DBG_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_GPIO_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= 0xfca00000,
+		.pfn		= __phys_to_pfn(0xca000000),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= 0xfcb00000,
+		.pfn		= __phys_to_pfn(0xcb000000),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init intcp_map_io(void)
diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c
index c5f19d160598..5b41e3a724e1 100644
--- a/arch/arm/mach-integrator/lm.c
+++ b/arch/arm/mach-integrator/lm.c
@@ -10,6 +10,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/slab.h>
 
 #include <asm/arch/lm.h>
 
diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c
index 0f921ba2750c..bb5091223b63 100644
--- a/arch/arm/mach-iop3xx/iop321-setup.c
+++ b/arch/arm/mach-iop3xx/iop321-setup.c
@@ -38,13 +38,17 @@
  * Standard IO mapping for all IOP321 based systems
  */
 static struct map_desc iop321_std_desc[] __initdata = {
- /* virtual     physical      length      type */
-
- /* mem mapped registers */
- { IOP321_VIRT_MEM_BASE,  IOP321_PHYS_MEM_BASE,   0x00002000,  MT_DEVICE },
-
- /* PCI IO space */
- { IOP321_PCI_LOWER_IO_VA,  IOP321_PCI_LOWER_IO_PA,   IOP321_PCI_IO_WINDOW_SIZE,  MT_DEVICE }
+	 {	/* mem mapped registers */
+		.virtual	= IOP321_VIRT_MEM_BASE,
+		.pfn		= __phys_to_pfn(IOP321_PHYS_MEM_BASE),
+		.length		= 0x00002000,
+		.type		= MT_DEVICE
+	 }, {	/* PCI IO space */
+		.virtual	= IOP321_PCI_LOWER_IO_VA,
+		.pfn		= __phys_to_pfn(IOP321_PCI_LOWER_IO_PA),
+		.length		= IOP321_PCI_IO_WINDOW_SIZE,
+		.type		= MT_DEVICE
+	 }
 };
 
 #ifdef CONFIG_ARCH_IQ80321
diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c
index fc74b722f72f..a2533c3ab42f 100644
--- a/arch/arm/mach-iop3xx/iop331-setup.c
+++ b/arch/arm/mach-iop3xx/iop331-setup.c
@@ -37,13 +37,17 @@
  * Standard IO mapping for all IOP331 based systems
  */
 static struct map_desc iop331_std_desc[] __initdata = {
- /* virtual     physical      length      type */
-
- /* mem mapped registers */
- { IOP331_VIRT_MEM_BASE,  IOP331_PHYS_MEM_BASE,   0x00002000,  MT_DEVICE },
-
- /* PCI IO space */
- { IOP331_PCI_LOWER_IO_VA,  IOP331_PCI_LOWER_IO_PA,   IOP331_PCI_IO_WINDOW_SIZE,  MT_DEVICE }
+	{	/* mem mapped registers */
+		.virtual	= IOP331_VIRT_MEM_BASE,
+		.pfn		= __phys_to_pfn(IOP331_PHYS_MEM_BASE),
+		.length		= 0x00002000,
+		.type		= MT_DEVICE
+	}, {	/* PCI IO space */
+		.virtual	= IOP331_PCI_LOWER_IO_VA,
+		.pfn		= __phys_to_pfn(IOP331_PCI_LOWER_IO_PA),
+		.length		= IOP331_PCI_IO_WINDOW_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static struct uart_port iop331_serial_ports[] = {
diff --git a/arch/arm/mach-iop3xx/iq31244-mm.c b/arch/arm/mach-iop3xx/iq31244-mm.c
index 55992ab586ba..e874b54eefe3 100644
--- a/arch/arm/mach-iop3xx/iq31244-mm.c
+++ b/arch/arm/mach-iop3xx/iq31244-mm.c
@@ -29,10 +29,12 @@
  * We use RedBoot's setup for the onboard devices.
  */
 static struct map_desc iq31244_io_desc[] __initdata = {
- /* virtual     physical      length        type */
-
- /* on-board devices */
- { IQ31244_UART, IQ31244_UART,   0x00100000,   MT_DEVICE }
+	{	/* on-board devices */
+		.virtual	= IQ31244_UART,
+		.pfn		= __phys_to_pfn(IQ31244_UART),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init iq31244_map_io(void)
diff --git a/arch/arm/mach-iop3xx/iq31244-pci.c b/arch/arm/mach-iop3xx/iq31244-pci.c
index f997daa800bf..c6a973ba8fc6 100644
--- a/arch/arm/mach-iop3xx/iq31244-pci.c
+++ b/arch/arm/mach-iop3xx/iq31244-pci.c
@@ -14,6 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-iop3xx/iq80321-mm.c b/arch/arm/mach-iop3xx/iq80321-mm.c
index bb3e9e5a9aff..d9cac5e1fc3d 100644
--- a/arch/arm/mach-iop3xx/iq80321-mm.c
+++ b/arch/arm/mach-iop3xx/iq80321-mm.c
@@ -29,10 +29,12 @@
  * We use RedBoot's setup for the onboard devices.
  */
 static struct map_desc iq80321_io_desc[] __initdata = {
- /* virtual     physical      length        type */
-
- /* on-board devices */
- { IQ80321_UART, IQ80321_UART,   0x00100000,   MT_DEVICE }
+ 	{	/* on-board devices */
+		.virtual	= IQ80321_UART,
+		.pfn		= __phys_to_pfn(IQ80321_UART),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init iq80321_map_io(void)
diff --git a/arch/arm/mach-iop3xx/iq80321-pci.c b/arch/arm/mach-iop3xx/iq80321-pci.c
index 79fea3d20b66..802f6d091b75 100644
--- a/arch/arm/mach-iop3xx/iq80321-pci.c
+++ b/arch/arm/mach-iop3xx/iq80321-pci.c
@@ -14,6 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-iop3xx/iq80331-pci.c b/arch/arm/mach-iop3xx/iq80331-pci.c
index f37a0e26b466..654e450a1311 100644
--- a/arch/arm/mach-iop3xx/iq80331-pci.c
+++ b/arch/arm/mach-iop3xx/iq80331-pci.c
@@ -13,6 +13,8 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-iop3xx/iq80332-pci.c b/arch/arm/mach-iop3xx/iq80332-pci.c
index b9807aa2aade..65951ffe4631 100644
--- a/arch/arm/mach-iop3xx/iq80332-pci.c
+++ b/arch/arm/mach-iop3xx/iq80332-pci.c
@@ -13,6 +13,8 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index f4d7f1f6ef85..01c393c504d0 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -83,42 +83,42 @@ void ixp2000_release_slowport(struct slowport_cfg *old_cfg)
 static struct map_desc ixp2000_io_desc[] __initdata = {
 	{
 		.virtual	= IXP2000_CAP_VIRT_BASE,
-		.physical	= IXP2000_CAP_PHYS_BASE,
+		.pfn		= __phys_to_pfn(IXP2000_CAP_PHYS_BASE),
 		.length		= IXP2000_CAP_SIZE,
 		.type		= MT_DEVICE
 	}, {
 		.virtual	= IXP2000_INTCTL_VIRT_BASE,
-		.physical	= IXP2000_INTCTL_PHYS_BASE,
+		.pfn		= __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE),
 		.length		= IXP2000_INTCTL_SIZE,
 		.type		= MT_DEVICE
 	}, {
 		.virtual	= IXP2000_PCI_CREG_VIRT_BASE,
-		.physical	= IXP2000_PCI_CREG_PHYS_BASE,
+		.pfn		= __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE),
 		.length		= IXP2000_PCI_CREG_SIZE,
 		.type		= MT_DEVICE
 	}, {
 		.virtual	= IXP2000_PCI_CSR_VIRT_BASE,
-		.physical	= IXP2000_PCI_CSR_PHYS_BASE,
+		.pfn		= __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE),
 		.length		= IXP2000_PCI_CSR_SIZE,
 		.type		= MT_DEVICE
 	}, {
 		.virtual	= IXP2000_MSF_VIRT_BASE,
-		.physical	= IXP2000_MSF_PHYS_BASE,
+		.pfn		= __phys_to_pfn(IXP2000_MSF_PHYS_BASE),
 		.length		= IXP2000_MSF_SIZE,
 		.type		= MT_DEVICE
 	}, {
 		.virtual	= IXP2000_PCI_IO_VIRT_BASE,
-		.physical	= IXP2000_PCI_IO_PHYS_BASE,
+		.pfn		= __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE),
 		.length		= IXP2000_PCI_IO_SIZE,
 		.type		= MT_DEVICE
 	}, {
 		.virtual	= IXP2000_PCI_CFG0_VIRT_BASE,
-		.physical	= IXP2000_PCI_CFG0_PHYS_BASE,
+		.pfn		= __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE),
 		.length		= IXP2000_PCI_CFG0_SIZE,
 		.type		= MT_DEVICE
 	}, {
 		.virtual	= IXP2000_PCI_CFG1_VIRT_BASE,
-		.physical	= IXP2000_PCI_CFG1_PHYS_BASE,
+		.pfn		= __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE),
 		.length		= IXP2000_PCI_CFG1_SIZE,
 		.type		= MT_DEVICE
 	}
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 63ba0191aa65..8b4a839b6279 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -176,7 +176,7 @@ void ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long
  *************************************************************************/
 static struct map_desc ixdp2x00_io_desc __initdata = {
 	.virtual	= IXDP2X00_VIRT_CPLD_BASE, 
-	.physical	= IXDP2X00_PHYS_CPLD_BASE,
+	.pfn		= __phys_to_pfn(IXDP2X00_PHYS_CPLD_BASE),
 	.length		= IXDP2X00_CPLD_SIZE,
 	.type		= MT_DEVICE
 };
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 7a5109921287..fee1d7b73503 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -136,7 +136,7 @@ void __init ixdp2x01_init_irq(void)
  *************************************************************************/
 static struct map_desc ixdp2x01_io_desc __initdata = {
 	.virtual	= IXDP2X01_VIRT_CPLD_BASE, 
-	.physical	= IXDP2X01_PHYS_CPLD_BASE,
+	.pfn		= __phys_to_pfn(IXDP2X01_PHYS_CPLD_BASE),
 	.length		= IXDP2X01_CPLD_REGION_SIZE,
 	.type		= MT_DEVICE
 };
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 36b6045213ee..6c396447c4e0 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -44,24 +44,24 @@
 static struct map_desc ixp4xx_io_desc[] __initdata = {
 	{	/* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
 		.virtual	= IXP4XX_PERIPHERAL_BASE_VIRT,
-		.physical	= IXP4XX_PERIPHERAL_BASE_PHYS,
+		.pfn		= __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
 		.length		= IXP4XX_PERIPHERAL_REGION_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* Expansion Bus Config Registers */
 		.virtual	= IXP4XX_EXP_CFG_BASE_VIRT,
-		.physical	= IXP4XX_EXP_CFG_BASE_PHYS,
+		.pfn		= __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
 		.length		= IXP4XX_EXP_CFG_REGION_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* PCI Registers */
 		.virtual	= IXP4XX_PCI_CFG_BASE_VIRT,
-		.physical	= IXP4XX_PCI_CFG_BASE_PHYS,
+		.pfn		= __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
 		.length		= IXP4XX_PCI_CFG_REGION_SIZE,
 		.type		= MT_DEVICE
 	},
 #ifdef CONFIG_DEBUG_LL
 	{	/* Debug UART mapping */
 		.virtual	= IXP4XX_DEBUG_UART_BASE_VIRT,
-		.physical	= IXP4XX_DEBUG_UART_BASE_PHYS,
+		.pfn		= __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS),
 		.length		= IXP4XX_DEBUG_UART_REGION_SIZE,
 		.type		= MT_DEVICE
 	}
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index cb3dcd3bd00a..19f2fa2244c4 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -26,8 +26,17 @@
       /* This function calls the board specific IRQ initialization function. */
 
 static struct map_desc kev7a400_io_desc[] __initdata = {
-	{ IO_VIRT,    IO_PHYS,    IO_SIZE,    MT_DEVICE },
-	{ CPLD_VIRT,  CPLD_PHYS,  CPLD_SIZE,  MT_DEVICE },
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD_VIRT,
+		.pfn		= __phys_to_pfn(CPLD_PHYS),
+		.length		= CPLD_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init kev7a400_map_io(void)
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index 6eb61a17c63b..a20eabc132b0 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -227,23 +227,79 @@ void __init lh7a40x_init_board_irq (void)
 }
 
 static struct map_desc lpd7a400_io_desc[] __initdata = {
-	{     IO_VIRT,	    IO_PHYS,	    IO_SIZE,	MT_DEVICE },
-	/* Mapping added to work around chip select problems */
-	{ IOBARRIER_VIRT, IOBARRIER_PHYS, IOBARRIER_SIZE, MT_DEVICE },
-	{ CF_VIRT,	CF_PHYS,	CF_SIZE,	MT_DEVICE },
+	{
+		.virtual	=     IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= 	    IO_SIZE,
+		.type		= MT_DEVICE
+	}, {	/* Mapping added to work around chip select problems */
+		.virtual	= IOBARRIER_VIRT,
+		.pfn		= __phys_to_pfn(IOBARRIER_PHYS),
+		.length		= IOBARRIER_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CF_VIRT,
+		.pfn		= __phys_to_pfn(CF_PHYS),
+		.length		= 	CF_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD02_VIRT,
+		.pfn		= __phys_to_pfn(CPLD02_PHYS),
+		.length		= 	CPLD02_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD06_VIRT,
+		.pfn		= __phys_to_pfn(CPLD06_PHYS),
+		.length		= 	CPLD06_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD08_VIRT,
+		.pfn		= __phys_to_pfn(CPLD08_PHYS),
+		.length		= 	CPLD08_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD0C_VIRT,
+		.pfn		= __phys_to_pfn(CPLD0C_PHYS),
+		.length		= 	CPLD0C_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD0E_VIRT,
+		.pfn		= __phys_to_pfn(CPLD0E_PHYS),
+		.length		= 	CPLD0E_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD10_VIRT,
+		.pfn		= __phys_to_pfn(CPLD10_PHYS),
+		.length		= 	CPLD10_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD12_VIRT,
+		.pfn		= __phys_to_pfn(CPLD12_PHYS),
+		.length		= 	CPLD12_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD14_VIRT,
+		.pfn		= __phys_to_pfn(CPLD14_PHYS),
+		.length		= 	CPLD14_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD16_VIRT,
+		.pfn		= __phys_to_pfn(CPLD16_PHYS),
+		.length		= 	CPLD16_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD18_VIRT,
+		.pfn		= __phys_to_pfn(CPLD18_PHYS),
+		.length		= 	CPLD18_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= CPLD1A_VIRT,
+		.pfn		= __phys_to_pfn(CPLD1A_PHYS),
+		.length		= 	CPLD1A_SIZE,
+		.type		= MT_DEVICE
+	},
 	/* This mapping is redundant since the smc driver performs another. */
 /*	{ CPLD00_VIRT,  CPLD00_PHYS,	CPLD00_SIZE,	MT_DEVICE }, */
-	{ CPLD02_VIRT,  CPLD02_PHYS,	CPLD02_SIZE,	MT_DEVICE },
-	{ CPLD06_VIRT,  CPLD06_PHYS,	CPLD06_SIZE,	MT_DEVICE },
-	{ CPLD08_VIRT,	CPLD08_PHYS,	CPLD08_SIZE,	MT_DEVICE },
-	{ CPLD0C_VIRT,	CPLD0C_PHYS,	CPLD0C_SIZE,	MT_DEVICE },
-	{ CPLD0E_VIRT,	CPLD0E_PHYS,	CPLD0E_SIZE,	MT_DEVICE },
-	{ CPLD10_VIRT,	CPLD10_PHYS,	CPLD10_SIZE,	MT_DEVICE },
-	{ CPLD12_VIRT,	CPLD12_PHYS,	CPLD12_SIZE,	MT_DEVICE },
-	{ CPLD14_VIRT,	CPLD14_PHYS,	CPLD14_SIZE,	MT_DEVICE },
-	{ CPLD16_VIRT,	CPLD16_PHYS,	CPLD16_SIZE,	MT_DEVICE },
-	{ CPLD18_VIRT,	CPLD18_PHYS,	CPLD18_SIZE,	MT_DEVICE },
-	{ CPLD1A_VIRT,	CPLD1A_PHYS,	CPLD1A_SIZE,	MT_DEVICE },
 };
 
 void __init
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index df0312b596e4..fd9183ff2ed5 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -103,8 +103,12 @@ static struct platform_device innovator_flash_device = {
 
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc innovator1510_io_desc[] __initdata = {
-{ OMAP1510_FPGA_BASE, OMAP1510_FPGA_START, OMAP1510_FPGA_SIZE,
-	MT_DEVICE },
+	{
+		.virtual	= OMAP1510_FPGA_BASE,
+		.pfn		= __phys_to_pfn(OMAP1510_FPGA_START),
+		.length		= OMAP1510_FPGA_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static struct resource innovator1510_smc91x_resources[] = {
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 107c68c8ab54..2ba26e239108 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -134,8 +134,12 @@ void omap_perseus2_init_irq(void)
 
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc omap_perseus2_io_desc[] __initdata = {
-	{H2P2_DBG_FPGA_BASE, H2P2_DBG_FPGA_START, H2P2_DBG_FPGA_SIZE,
-	 MT_DEVICE},
+	{
+		.virtual	= H2P2_DBG_FPGA_BASE,
+		.pfn		= __phys_to_pfn(H2P2_DBG_FPGA_START),
+		.length		= H2P2_DBG_FPGA_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init omap_perseus2_map_io(void)
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index eb8261d7dead..79fb86535ebc 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -26,27 +26,59 @@ extern void omap_sram_init(void);
  * default mapping provided here.
  */
 static struct map_desc omap_io_desc[] __initdata = {
- { IO_VIRT,      	IO_PHYS,             IO_SIZE,        	   MT_DEVICE },
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 #ifdef CONFIG_ARCH_OMAP730
 static struct map_desc omap730_io_desc[] __initdata = {
- { OMAP730_DSP_BASE,    OMAP730_DSP_START,    OMAP730_DSP_SIZE,    MT_DEVICE },
- { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE },
+	{
+		.virtual	= OMAP730_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP730_DSP_START),
+		.length		= OMAP730_DSP_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= OMAP730_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP730_DSPREG_START),
+		.length		= OMAP730_DSPREG_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 #endif
 
 #ifdef CONFIG_ARCH_OMAP1510
 static struct map_desc omap1510_io_desc[] __initdata = {
- { OMAP1510_DSP_BASE,    OMAP1510_DSP_START,    OMAP1510_DSP_SIZE,    MT_DEVICE },
- { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE },
+	{
+		.virtual	= OMAP1510_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP1510_DSP_START),
+		.length		= OMAP1510_DSP_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= OMAP1510_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP1510_DSPREG_START),
+		.length		= OMAP1510_DSPREG_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 #endif
 
 #if defined(CONFIG_ARCH_OMAP16XX)
 static struct map_desc omap16xx_io_desc[] __initdata = {
- { OMAP16XX_DSP_BASE,    OMAP16XX_DSP_START,    OMAP16XX_DSP_SIZE,    MT_DEVICE },
- { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
+	{
+		.virtual	= OMAP16XX_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP16XX_DSP_START),
+		.length		= OMAP16XX_DSP_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= OMAP16XX_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP16XX_DSPREG_START),
+		.length		= OMAP16XX_DSPREG_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 #endif
 
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 60c8b9d8bb9c..656f73bbcb5a 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -33,6 +33,7 @@
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/irq.h>
+#include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
 #include <asm/arch/corgi.h>
@@ -224,6 +225,22 @@ static struct pxamci_platform_data corgi_mci_platform_data = {
 };
 
 
+/*
+ * Irda
+ */
+static void corgi_irda_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF)
+		GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+	else
+		GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+}
+
+static struct pxaficp_platform_data corgi_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_OFF,
+	.transceiver_mode = corgi_irda_transceiver_mode,
+};
+
 
 /*
  * USB Device Controller
@@ -269,10 +286,13 @@ static void __init corgi_init(void)
 
 	corgi_ssp_set_machinfo(&corgi_ssp_machinfo);
 
+	pxa_gpio_mode(CORGI_GPIO_IR_ON | GPIO_OUT);
 	pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT);
 	pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN);
+
  	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&corgi_mci_platform_data);
+	pxa_set_ficp_info(&corgi_ficp_platform_data);
 
 	scoop_num = 1;
 	scoop_devs = &corgi_pcmcia_scoop[0];
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 0ef428287055..136c269db0b7 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -222,24 +222,22 @@ static int corgi_ssp_remove(struct device *dev)
 	return 0;
 }
 
-static int corgi_ssp_suspend(struct device *dev, pm_message_t state, u32 level)
+static int corgi_ssp_suspend(struct device *dev, pm_message_t state)
 {
-	if (level == SUSPEND_POWER_DOWN) {
-		ssp_flush(&corgi_ssp_dev);
-		ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
-	}
+	ssp_flush(&corgi_ssp_dev);
+	ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
+
 	return 0;
 }
 
-static int corgi_ssp_resume(struct device *dev, u32 level)
+static int corgi_ssp_resume(struct device *dev)
 {
-	if (level == RESUME_POWER_ON) {
-		GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);  /* High - Disable LCD Control/Timing Gen */
-		GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
-		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
-		ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
-		ssp_enable(&corgi_ssp_dev);
-	}
+	GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);  /* High - Disable LCD Control/Timing Gen */
+	GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
+	GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
+	ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
+	ssp_enable(&corgi_ssp_dev);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 1d7677669a76..9c0289333301 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -23,6 +23,7 @@
 #include <linux/device.h>
 #include <linux/ioport.h>
 #include <linux/pm.h>
+#include <linux/string.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
@@ -34,6 +35,7 @@
 #include <asm/arch/udc.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
 #include <asm/arch/i2c.h>
 
 #include "generic.h"
@@ -92,14 +94,42 @@ EXPORT_SYMBOL(pxa_set_cken);
  *         and cache flush area.
  */
 static struct map_desc standard_io_desc[] __initdata = {
- /* virtual     physical    length      type */
-  { 0xf2000000, 0x40000000, 0x02000000, MT_DEVICE }, /* Devs */
-  { 0xf4000000, 0x44000000, 0x00100000, MT_DEVICE }, /* LCD */
-  { 0xf6000000, 0x48000000, 0x00100000, MT_DEVICE }, /* Mem Ctl */
-  { 0xf8000000, 0x4c000000, 0x00100000, MT_DEVICE }, /* USB host */
-  { 0xfa000000, 0x50000000, 0x00100000, MT_DEVICE }, /* Camera */
-  { 0xfe000000, 0x58000000, 0x00100000, MT_DEVICE }, /* IMem ctl */
-  { 0xff000000, 0x00000000, 0x00100000, MT_DEVICE }  /* UNCACHED_PHYS_0 */
+  	{	/* Devs */
+		.virtual	=  0xf2000000,
+		.pfn		= __phys_to_pfn(0x40000000),
+		.length		= 0x02000000,
+		.type		= MT_DEVICE
+	}, {	/* LCD */
+		.virtual	=  0xf4000000,
+		.pfn		= __phys_to_pfn(0x44000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* Mem Ctl */
+		.virtual	=  0xf6000000,
+		.pfn		= __phys_to_pfn(0x48000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* USB host */
+		.virtual	=  0xf8000000,
+		.pfn		= __phys_to_pfn(0x4c000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* Camera */
+		.virtual	=  0xfa000000,
+		.pfn		= __phys_to_pfn(0x50000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* IMem ctl */
+		.virtual	=  0xfe000000,
+		.pfn		= __phys_to_pfn(0x58000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* UNCACHED_PHYS_0 */
+		.virtual	= 0xff000000,
+		.pfn		= __phys_to_pfn(0x00000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init pxa_map_io(void)
@@ -225,6 +255,10 @@ static struct platform_device stuart_device = {
 	.name		= "pxa2xx-uart",
 	.id		= 2,
 };
+static struct platform_device hwuart_device = {
+	.name		= "pxa2xx-uart",
+	.id		= 3,
+};
 
 static struct resource i2c_resources[] = {
 	{
@@ -265,10 +299,26 @@ static struct resource i2s_resources[] = {
 static struct platform_device i2s_device = {
 	.name		= "pxa2xx-i2s",
 	.id		= -1,
-	.resource	= i2c_resources,
+	.resource	= i2s_resources,
 	.num_resources	= ARRAY_SIZE(i2s_resources),
 };
 
+static u64 pxaficp_dmamask = ~(u32)0;
+
+static struct platform_device pxaficp_device = {
+	.name		= "pxa2xx-ir",
+	.id		= -1,
+	.dev		= {
+		.dma_mask = &pxaficp_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
+
+void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
+{
+	pxaficp_device.dev.platform_data = info;
+}
+
 static struct platform_device *devices[] __initdata = {
 	&pxamci_device,
 	&udc_device,
@@ -276,13 +326,26 @@ static struct platform_device *devices[] __initdata = {
 	&ffuart_device,
 	&btuart_device,
 	&stuart_device,
+	&pxaficp_device,
 	&i2c_device,
 	&i2s_device,
 };
 
 static int __init pxa_init(void)
 {
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
+	int cpuid, ret;
+
+	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+	if (ret)
+		return ret;
+
+	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
+	cpuid = read_cpuid(CPUID_ID);
+	if (((cpuid >> 4) & 0xfff) == 0x2d0 ||
+	    ((cpuid >> 4) & 0xfff) == 0x290)
+		ret = platform_device_register(&hwuart_device);
+
+	return ret;
 }
 
 subsys_initcall(pxa_init);
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 386e107b53cc..01a83ab09ac3 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -152,16 +152,17 @@ static void __init idp_init_irq(void)
 }
 
 static struct map_desc idp_io_desc[] __initdata = {
- /* virtual     physical    length      type */
-
-  { IDP_COREVOLT_VIRT,
-    IDP_COREVOLT_PHYS,
-    IDP_COREVOLT_SIZE,
-    MT_DEVICE },
-  { IDP_CPLD_VIRT,
-    IDP_CPLD_PHYS,
-    IDP_CPLD_SIZE,
-    MT_DEVICE }
+  	{
+		.virtual	=  IDP_COREVOLT_VIRT,
+		.pfn		= __phys_to_pfn(IDP_COREVOLT_PHYS),
+		.length		= IDP_COREVOLT_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  IDP_CPLD_VIRT,
+		.pfn		= __phys_to_pfn(IDP_CPLD_PHYS),
+		.length		= IDP_CPLD_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init idp_map_io(void)
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 1f38033921e9..beccf455f796 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -35,6 +35,7 @@
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/lubbock.h>
 #include <asm/arch/udc.h>
+#include <asm/arch/irda.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/mmc.h>
 
@@ -237,16 +238,40 @@ static struct pxamci_platform_data lubbock_mci_platform_data = {
 	.init 		= lubbock_mci_init,
 };
 
+static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (mode & IR_SIRMODE) {
+		LUB_MISC_WR &= ~(1 << 4);
+	} else if (mode & IR_FIRMODE) {
+		LUB_MISC_WR |= 1 << 4;
+	}
+	local_irq_restore(flags);
+}
+
+static struct pxaficp_platform_data lubbock_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE,
+	.transceiver_mode = lubbock_irda_transceiver_mode,
+};
+
 static void __init lubbock_init(void)
 {
 	pxa_set_udc_info(&udc_info);
 	set_pxa_fb_info(&sharp_lm8v31);
 	pxa_set_mci_info(&lubbock_mci_platform_data);
+	pxa_set_ficp_info(&lubbock_ficp_platform_data);
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
 static struct map_desc lubbock_io_desc[] __initdata = {
-  { LUBBOCK_FPGA_VIRT, LUBBOCK_FPGA_PHYS, 0x00100000, MT_DEVICE }, /* CPLD */
+  	{	/* CPLD */
+		.virtual	=  LUBBOCK_FPGA_VIRT,
+		.pfn		= __phys_to_pfn(LUBBOCK_FPGA_PHYS),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init lubbock_map_io(void)
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 85fdb5b1470a..a48c64026e1f 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -37,6 +37,7 @@
 #include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
 
 #include "generic.h"
 
@@ -294,6 +295,29 @@ static struct pxamci_platform_data mainstone_mci_platform_data = {
 	.exit		= mainstone_mci_exit,
 };
 
+static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (mode & IR_SIRMODE) {
+		MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR;
+	} else if (mode & IR_FIRMODE) {
+		MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
+	}
+	if (mode & IR_OFF) {
+		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
+	} else {
+		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL;
+	}
+	local_irq_restore(flags);
+}
+
+static struct pxaficp_platform_data mainstone_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode = mainstone_irda_transceiver_mode,
+};
+
 static void __init mainstone_init(void)
 {
 	/*
@@ -313,11 +337,17 @@ static void __init mainstone_init(void)
 		set_pxa_fb_info(&toshiba_ltm035a776c);
 
 	pxa_set_mci_info(&mainstone_mci_platform_data);
+	pxa_set_ficp_info(&mainstone_ficp_platform_data);
 }
 
 
 static struct map_desc mainstone_io_desc[] __initdata = {
-  { MST_FPGA_VIRT, MST_FPGA_PHYS, 0x00100000, MT_DEVICE }, /* CPLD */
+  	{	/* CPLD */
+		.virtual	=  MST_FPGA_VIRT,
+		.pfn		= __phys_to_pfn(MST_FPGA_PHYS),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init mainstone_map_io(void)
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index f25638810017..6d413f6701a7 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -32,6 +32,7 @@
 #include <asm/arch/irq.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
+#include <asm/arch/irda.h>
 #include <asm/arch/poodle.h>
 #include <asm/arch/pxafb.h>
 
@@ -152,6 +153,24 @@ static struct pxamci_platform_data poodle_mci_platform_data = {
 
 
 /*
+ * Irda
+ */
+static void poodle_irda_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF) {
+		GPSR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
+	} else {
+		GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
+	}
+}
+
+static struct pxaficp_platform_data poodle_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_OFF,
+	.transceiver_mode = poodle_irda_transceiver_mode,
+};
+
+
+/*
  * USB Device Controller
  */
 static void poodle_udc_command(int cmd)
@@ -244,8 +263,10 @@ static void __init poodle_init(void)
 
 	set_pxa_fb_info(&poodle_fb_info);
 	pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT);
+	pxa_gpio_mode(POODLE_GPIO_IR_ON | GPIO_OUT);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&poodle_mci_platform_data);
+	pxa_set_ficp_info(&poodle_ficp_platform_data);
 
 	scoop_num = 1;
 	scoop_devs = &poodle_pcmcia_scoop[0];
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 7869c3b4e62f..573a5758e781 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -129,7 +129,7 @@ void pxa_cpu_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_MEM:
 		/* set resume return address */
 		PSPR = virt_to_phys(pxa_cpu_resume);
-		pxa_cpu_suspend(3);
+		pxa_cpu_suspend(PWRMODE_SLEEP);
 		break;
 	}
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 9a791b07118d..09a5d593f04b 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -157,7 +157,7 @@ void pxa_cpu_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_MEM:
 		/* set resume return address */
 		PSPR = virt_to_phys(pxa_cpu_resume);
-		pxa_cpu_suspend(3);
+		pxa_cpu_suspend(PWRMODE_SLEEP);
 		break;
 	}
 }
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 5786ccad938c..c9862688ff3d 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -28,7 +28,9 @@
 /*
  * pxa_cpu_suspend()
  *
- * Forces CPU into sleep state
+ * Forces CPU into sleep state.
+ *
+ * r0 = value for PWRMODE M field for desired sleep state
  */
 
 ENTRY(pxa_cpu_suspend)
@@ -53,6 +55,7 @@ ENTRY(pxa_cpu_suspend)
 	mov	r10, sp
 	stmfd	sp!, {r3 - r10}
 
+	mov r5, r0				@ save sleep mode
 	@ preserve phys address of stack
 	mov	r0, sp
 	bl	sleep_phys_sp
@@ -66,7 +69,7 @@ ENTRY(pxa_cpu_suspend)
 	@ (also workaround for sighting 28071)
 
 	@ prepare value for sleep mode
-	mov	r1, #3				@ sleep mode
+	mov	r1, r5				@ sleep mode
 
 	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
 	mov	r2, #UNCACHED_PHYS_0
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index d0ab428c2d7d..b838842b6a20 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -34,6 +34,7 @@
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/irq.h>
+#include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
 #include <asm/arch/pxafb.h>
@@ -277,6 +278,23 @@ static struct pxamci_platform_data spitz_mci_platform_data = {
 
 
 /*
+ * Irda
+ */
+static void spitz_irda_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF)
+		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+	else
+		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+}
+
+static struct pxaficp_platform_data spitz_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_OFF,
+	.transceiver_mode = spitz_irda_transceiver_mode,
+};
+
+
+/*
  * Spitz PXA Framebuffer
  */
 static struct pxafb_mach_info spitz_pxafb_info __initdata = {
@@ -326,6 +344,7 @@ static void __init common_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_mci_info(&spitz_mci_platform_data);
+	pxa_set_ficp_info(&spitz_ficp_platform_data);
 	set_pxa_fb_parent(&spitzssp_device.dev);
 	set_pxa_fb_info(&spitz_pxafb_info);
 }
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index 8a3f27b76784..6f6dbbd08021 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -21,7 +21,7 @@
 ENTRY(pxa_cpu_standby)
 	ldr	r0, =PSSR
 	mov	r1, #(PSSR_PH | PSSR_STS)
-	mov	r2, #2
+	mov	r2, #PWRMODE_STANDBY
 	mov	r3, #UNCACHED_PHYS_0	@ Read mem context in.
 	ldr	ip, [r3]
 	b	1f
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index e3587efec4bf..5c4ac1c008a6 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -61,9 +61,22 @@ static int __init parse_tag_acorn(const struct tag *tag)
 __tagtable(ATAG_ACORN, parse_tag_acorn);
 
 static struct map_desc rpc_io_desc[] __initdata = {
- { SCREEN_BASE,	SCREEN_START,	2*1048576, MT_DEVICE }, /* VRAM		*/
- { (u32)IO_BASE, IO_START,	IO_SIZE	 , MT_DEVICE }, /* IO space	*/
- { EASI_BASE,	EASI_START,	EASI_SIZE, MT_DEVICE }  /* EASI space	*/
+ 	{	/* VRAM		*/
+		.virtual	=  SCREEN_BASE,
+		.pfn		= __phys_to_pfn(SCREEN_START),
+		.length		= 	2*1048576,
+		.type		= MT_DEVICE
+	}, {	/* IO space	*/
+		.virtual	=  (u32)IO_BASE,
+		.pfn		= __phys_to_pfn(IO_START),
+		.length		= 	IO_SIZE	 ,
+		.type		= MT_DEVICE
+	}, {	/* EASI space	*/
+		.virtual	= EASI_BASE,
+		.pfn		= __phys_to_pfn(EASI_START),
+		.length		= EASI_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init rpc_map_io(void)
diff --git a/arch/arm/mach-s3c2410/cpu.h b/arch/arm/mach-s3c2410/cpu.h
index 478c15c0e36a..9cbe5eef492b 100644
--- a/arch/arm/mach-s3c2410/cpu.h
+++ b/arch/arm/mach-s3c2410/cpu.h
@@ -21,7 +21,7 @@
 
 /* todo - fix when rmk changes iodescs to use `void __iomem *` */
 
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, S3C2410_PA_##x, S3C24XX_SZ_##x, MT_DEVICE }
+#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C2410_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef MHZ
 #define MHZ (1000*1000)
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c
index 0077937a7ab8..08bc7d95a45d 100644
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/mach-s3c2410/devs.c
@@ -47,7 +47,7 @@ struct platform_device *s3c24xx_uart_devs[3];
 static struct resource s3c_usb_resource[] = {
 	[0] = {
 		.start = S3C2410_PA_USBHOST,
-		.end   = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST,
+		.end   = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -77,7 +77,7 @@ EXPORT_SYMBOL(s3c_device_usb);
 static struct resource s3c_lcd_resource[] = {
 	[0] = {
 		.start = S3C2410_PA_LCD,
-		.end   = S3C2410_PA_LCD + S3C24XX_SZ_LCD,
+		.end   = S3C2410_PA_LCD + S3C24XX_SZ_LCD - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -103,21 +103,25 @@ struct platform_device s3c_device_lcd = {
 
 EXPORT_SYMBOL(s3c_device_lcd);
 
-static struct s3c2410fb_mach_info s3c2410fb_info;
-
-void __init set_s3c2410fb_info(struct s3c2410fb_mach_info *hard_s3c2410fb_info)
+void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
 {
-	memcpy(&s3c2410fb_info,hard_s3c2410fb_info,sizeof(struct s3c2410fb_mach_info));
-	s3c_device_lcd.dev.platform_data = &s3c2410fb_info;
+	struct s3c2410fb_mach_info *npd;
+
+	npd = kmalloc(sizeof(*npd), GFP_KERNEL);
+	if (npd) {
+		memcpy(npd, pd, sizeof(*npd));
+		s3c_device_lcd.dev.platform_data = npd;
+	} else {
+		printk(KERN_ERR "no memory for LCD platform data\n");
+	}
 }
-EXPORT_SYMBOL(set_s3c2410fb_info);
 
 /* NAND Controller */
 
 static struct resource s3c_nand_resource[] = {
 	[0] = {
 		.start = S3C2410_PA_NAND,
-		.end   = S3C2410_PA_NAND + S3C24XX_SZ_NAND,
+		.end   = S3C2410_PA_NAND + S3C24XX_SZ_NAND - 1,
 		.flags = IORESOURCE_MEM,
 	}
 };
@@ -136,7 +140,7 @@ EXPORT_SYMBOL(s3c_device_nand);
 static struct resource s3c_usbgadget_resource[] = {
 	[0] = {
 		.start = S3C2410_PA_USBDEV,
-		.end   = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV,
+		.end   = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -161,7 +165,7 @@ EXPORT_SYMBOL(s3c_device_usbgadget);
 static struct resource s3c_wdt_resource[] = {
 	[0] = {
 		.start = S3C2410_PA_WATCHDOG,
-		.end   = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG,
+		.end   = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -186,7 +190,7 @@ EXPORT_SYMBOL(s3c_device_wdt);
 static struct resource s3c_i2c_resource[] = {
 	[0] = {
 		.start = S3C2410_PA_IIC,
-		.end   = S3C2410_PA_IIC + S3C24XX_SZ_IIC,
+		.end   = S3C2410_PA_IIC + S3C24XX_SZ_IIC - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -211,7 +215,7 @@ EXPORT_SYMBOL(s3c_device_i2c);
 static struct resource s3c_iis_resource[] = {
 	[0] = {
 		.start = S3C2410_PA_IIS,
-		.end   = S3C2410_PA_IIS + S3C24XX_SZ_IIS,
+		.end   = S3C2410_PA_IIS + S3C24XX_SZ_IIS -1,
 		.flags = IORESOURCE_MEM,
 	}
 };
@@ -265,7 +269,7 @@ EXPORT_SYMBOL(s3c_device_rtc);
 static struct resource s3c_adc_resource[] = {
 	[0] = {
 		.start = S3C2410_PA_ADC,
-		.end   = S3C2410_PA_ADC + S3C24XX_SZ_ADC,
+		.end   = S3C2410_PA_ADC + S3C24XX_SZ_ADC - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -288,7 +292,7 @@ struct platform_device s3c_device_adc = {
 static struct resource s3c_sdi_resource[] = {
 	[0] = {
 		.start = S3C2410_PA_SDI,
-		.end   = S3C2410_PA_SDI + S3C24XX_SZ_SDI,
+		.end   = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -465,7 +469,7 @@ EXPORT_SYMBOL(s3c_device_timer3);
 static struct resource s3c_camif_resource[] = {
 	[0] = {
 		.start = S3C2440_PA_CAMIF,
-		.end   = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF,
+		.end   = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 94f1776cf312..23ea3d5fa09c 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -30,6 +30,7 @@
  *	04-Oct-2004  BJD  Added irq filter controls for GPIO
  *	05-Nov-2004  BJD  EXPORT_SYMBOL() added for all code
  *	13-Mar-2005  BJD  Updates for __iomem
+ *	26-Oct-2005  BJD  Added generic configuration types
  */
 
 
@@ -58,6 +59,27 @@ void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
 		mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
 	}
 
+	switch (function) {
+	case S3C2410_GPIO_LEAVE:
+		mask = 0;
+		function = 0;
+		break;
+
+	case S3C2410_GPIO_INPUT:
+	case S3C2410_GPIO_OUTPUT:
+	case S3C2410_GPIO_SFN2:
+	case S3C2410_GPIO_SFN3:
+		if (pin < S3C2410_GPIO_BANKB) {
+			function &= 1;
+			function <<= S3C2410_GPIO_OFFSET(pin);
+		} else {
+			function &= 3;
+			function <<= S3C2410_GPIO_OFFSET(pin)*2;
+		}
+	}
+
+	/* modify the specified register wwith IRQs off */
+
 	local_irq_save(flags);
 
 	con  = __raw_readl(base + 0x00);
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 7b51bfd0ba6d..c1b5c63ec24a 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -32,6 +32,7 @@
  *     25-Jul-2005 BJD  Removed ASIX static mappings
  *     27-Jul-2005 BJD  Ensure maximum frequency of i2c bus
  *     20-Sep-2005 BJD  Added static to non-exported items
+ *     26-Oct-2005 BJD  Added FB platform data
 */
 
 #include <linux/kernel.h>
@@ -61,8 +62,10 @@
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-mem.h>
 #include <asm/arch/regs-lcd.h>
+
 #include <asm/arch/nand.h>
 #include <asm/arch/iic.h>
+#include <asm/arch/fb.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -399,6 +402,38 @@ static struct s3c2410_platform_i2c bast_i2c_info = {
 	.max_freq	= 130*1000,
 };
 
+
+static struct s3c2410fb_mach_info __initdata bast_lcd_info = {
+	.width		= 640,
+	.height		= 480,
+
+	.xres		= {
+		.min		= 320,
+		.max		= 1024,
+		.defval		= 640,
+	},
+
+	.yres		= {
+		.min		= 240,
+		.max	        = 600,
+		.defval		= 480,
+	},
+
+	.bpp		= {
+		.min		= 4,
+		.max		= 16,
+		.defval		= 8,
+	},
+
+	.regs		= {
+		.lcdcon1	= 0x00000176,
+		.lcdcon2	= 0x1d77c7c2,
+		.lcdcon3	= 0x013a7f13,
+		.lcdcon4	= 0x00000057,
+		.lcdcon5	= 0x00014b02,
+	}
+};
+
 /* Standard BAST devices */
 
 static struct platform_device *bast_devices[] __initdata = {
@@ -454,6 +489,10 @@ static void __init bast_map_io(void)
 	usb_simtec_init();
 }
 
+static void __init bast_init(void)
+{
+	s3c24xx_fb_set_platdata(&bast_lcd_info);
+}
 
 MACHINE_START(BAST, "Simtec-BAST")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
@@ -463,5 +502,6 @@ MACHINE_START(BAST, "Simtec-BAST")
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= bast_map_io,
 	.init_irq	= s3c24xx_init_irq,
+	.init_machine	= bast_init,
 	.timer		= &s3c24xx_timer,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index fb3cb01266e5..7efeaaad2361 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -25,6 +25,7 @@
  *     14-Jan-2005 BJD  Added clock init
  *     10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
  *     20-Sep-2005 BJD  Added static to non-exported items
+ *     26-Oct-2005 BJD  Changed name of fb init call
 */
 
 #include <linux/kernel.h>
@@ -164,7 +165,7 @@ static void __init h1940_init_irq(void)
 
 static void __init h1940_init(void)
 {
-	set_s3c2410fb_info(&h1940_lcdcfg);
+	s3c24xx_fb_set_platdata(&h1940_lcdcfg);
 }
 
 MACHINE_START(H1940, "IPAQ-H1940")
diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c
index 722ef46b630a..6950e61b7914 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2440.c
@@ -19,6 +19,7 @@
  *	10-Mar-2005 LCVR  Replaced S3C2410_VA by S3C24XX_VA
  *	14-Mar-2005 BJD	  void __iomem fixes
  *	20-Sep-2005 BJD   Added static to non-exported items
+ *	26-Oct-2005 BJD   Added framebuffer data
 */
 
 #include <linux/kernel.h>
@@ -41,7 +42,10 @@
 //#include <asm/debug-ll.h>
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
 #include <asm/arch/idle.h>
+#include <asm/arch/fb.h>
 
 #include "s3c2410.h"
 #include "s3c2440.h"
@@ -86,6 +90,70 @@ static struct s3c2410_uartcfg smdk2440_uartcfgs[] = {
 	}
 };
 
+/* LCD driver info */
+
+static struct s3c2410fb_mach_info smdk2440_lcd_cfg __initdata = {
+	.regs	= {
+
+		.lcdcon1	= S3C2410_LCDCON1_TFT16BPP |
+				  S3C2410_LCDCON1_TFT |
+				  S3C2410_LCDCON1_CLKVAL(0x04),
+
+		.lcdcon2	= S3C2410_LCDCON2_VBPD(7) |
+				  S3C2410_LCDCON2_LINEVAL(319) |
+				  S3C2410_LCDCON2_VFPD(6) |
+				  S3C2410_LCDCON2_VSPW(3),
+
+		.lcdcon3	= S3C2410_LCDCON3_HBPD(19) |
+				  S3C2410_LCDCON3_HOZVAL(239) |
+				  S3C2410_LCDCON3_HFPD(7),
+
+		.lcdcon4	= S3C2410_LCDCON4_MVAL(0) |
+				  S3C2410_LCDCON4_HSPW(3),
+
+		.lcdcon5	= S3C2410_LCDCON5_FRM565 |
+				  S3C2410_LCDCON5_INVVLINE |
+				  S3C2410_LCDCON5_INVVFRAME |
+				  S3C2410_LCDCON5_PWREN |
+				  S3C2410_LCDCON5_HWSWP,
+	},
+
+#if 0
+	/* currently setup by downloader */
+	.gpccon		= 0xaa940659,
+	.gpccon_mask	= 0xffffffff,
+	.gpcup		= 0x0000ffff,
+	.gpcup_mask	= 0xffffffff,
+	.gpdcon		= 0xaa84aaa0,
+	.gpdcon_mask	= 0xffffffff,
+	.gpdup		= 0x0000faff,
+	.gpdup_mask	= 0xffffffff,
+#endif
+
+	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
+
+	.width		= 240,
+	.height		= 320,
+
+	.xres		= {
+		.min	= 240,
+		.max	= 240,
+		.defval	= 240,
+	},
+
+	.yres		= {
+		.min	= 320,
+		.max	= 320,
+		.defval = 320,
+	},
+
+	.bpp		= {
+		.min	= 16,
+		.max	= 16,
+		.defval = 16,
+	},
+};
+
 static struct platform_device *smdk2440_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
@@ -121,6 +189,8 @@ static void __init smdk2440_machine_init(void)
 	s3c2410_gpio_setpin(S3C2410_GPF6, 0);
 	s3c2410_gpio_setpin(S3C2410_GPF7, 0);
 
+	s3c24xx_fb_set_platdata(&smdk2440_lcd_cfg);
+
 	s3c2410_pm_init();
 }
 
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 24687f511bf5..75efb5da5b6d 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -388,9 +388,17 @@ static struct sa1100_port_fns assabet_port_fns __initdata = {
 };
 
 static struct map_desc assabet_io_desc[] __initdata = {
- /* virtual     physical    length      type */
-  { 0xf1000000, 0x12000000, 0x00100000, MT_DEVICE }, /* Board Control Register */
-  { 0xf2800000, 0x4b800000, 0x00800000, MT_DEVICE }  /* MQ200 */
+  	{	/* Board Control Register */
+		.virtual	=  0xf1000000,
+		.pfn		= __phys_to_pfn(0x12000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* MQ200 */
+		.virtual	=  0xf2800000,
+		.pfn		= __phys_to_pfn(0x4b800000),
+		.length		= 0x00800000,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init assabet_map_io(void)
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b6169cb09196..c92cebff7f8e 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -254,10 +254,22 @@ EXPORT_SYMBOL(badge4_set_5V);
 
 
 static struct map_desc badge4_io_desc[] __initdata = {
-  /*  virtual    physical    length    type */
-  {0xf1000000, 0x08000000, 0x00100000, MT_DEVICE },/* SRAM  bank 1 */
-  {0xf2000000, 0x10000000, 0x00100000, MT_DEVICE },/* SRAM  bank 2 */
-  {0xf4000000, 0x48000000, 0x00100000, MT_DEVICE } /* SA-1111      */
+  	{	/* SRAM  bank 1 */
+		.virtual	= 0xf1000000,
+		.pfn		= __phys_to_pfn(0x08000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* SRAM  bank 2 */
+		.virtual	= 0xf2000000,
+		.pfn		= __phys_to_pfn(0x10000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* SA-1111      */
+		.virtual	= 0xf4000000,
+		.pfn		= __phys_to_pfn(0x48000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}
 };
 
 static void
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 9484be7dc671..23cb74885275 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -100,8 +100,12 @@ static void __init cerf_init_irq(void)
 }
 
 static struct map_desc cerf_io_desc[] __initdata = {
-  /* virtual	 physical    length	 type */
-  { 0xf0000000, 0x08000000, 0x00100000, MT_DEVICE }  /* Crystal Ethernet Chip */
+  	{	/* Crystal Ethernet Chip */
+		.virtual	=  0xf0000000,
+		.pfn		= __phys_to_pfn(0x08000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init cerf_map_io(void)
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 6ecab7e2c238..7fd6e29c36b7 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -171,9 +171,17 @@ static void __init collie_init(void)
 }
 
 static struct map_desc collie_io_desc[] __initdata = {
-	/* virtual     physical    length      type */
-	{0xe8000000, 0x00000000, 0x02000000, MT_DEVICE},	/* 32M main flash (cs0) */
-	{0xea000000, 0x08000000, 0x02000000, MT_DEVICE},	/* 32M boot flash (cs1) */
+	{	/* 32M main flash (cs0) */
+		.virtual	= 0xe8000000,
+		.pfn		= __phys_to_pfn(0x00000000),
+		.length		= 0x02000000,
+		.type		= MT_DEVICE
+	}, {	/* 32M boot flash (cs1) */
+		.virtual	= 0xea000000,
+		.pfn		= __phys_to_pfn(0x08000000),
+		.length		= 0x02000000,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init collie_map_io(void)
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 3f1e358455e5..83eba8b54816 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -17,12 +17,14 @@
 #include <linux/pm.h>
 #include <linux/cpufreq.h>
 #include <linux/ioport.h>
+#include <linux/sched.h>	/* just for sched_clock() - funny that */
 
 #include <asm/div64.h>
 #include <asm/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
+#include <asm/mach/flash.h>
 #include <asm/irq.h>
 
 #include "generic.h"
@@ -283,6 +285,7 @@ static struct platform_device sa11x0mtd_device = {
 void sa11x0_set_flash_data(struct flash_platform_data *flash,
 			   struct resource *res, int nr)
 {
+	flash->name = "sa1100";
 	sa11x0mtd_device.dev.platform_data = flash;
 	sa11x0mtd_device.resource = res;
 	sa11x0mtd_device.num_resources = nr;
@@ -369,11 +372,27 @@ EXPORT_SYMBOL(sa1100fb_lcd_power);
  */
 
 static struct map_desc standard_io_desc[] __initdata = {
- /* virtual     physical    length      type */
-  { 0xf8000000, 0x80000000, 0x00100000, MT_DEVICE }, /* PCM */
-  { 0xfa000000, 0x90000000, 0x00100000, MT_DEVICE }, /* SCM */
-  { 0xfc000000, 0xa0000000, 0x00100000, MT_DEVICE }, /* MER */
-  { 0xfe000000, 0xb0000000, 0x00200000, MT_DEVICE }  /* LCD + DMA */
+  	{	/* PCM */
+		.virtual	=  0xf8000000,
+		.pfn		= __phys_to_pfn(0x80000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* SCM */
+		.virtual	=  0xfa000000,
+		.pfn		= __phys_to_pfn(0x90000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* MER */
+		.virtual	=  0xfc000000,
+		.pfn		= __phys_to_pfn(0xa0000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* LCD + DMA */
+		.virtual	=  0xfe000000,
+		.pfn		= __phys_to_pfn(0xb0000000),
+		.length		= 0x00200000,
+		.type		= MT_DEVICE
+	},
 };
 
 void __init sa1100_map_io(void)
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index e7aa2681ca64..e8352b7f74b0 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -223,10 +223,22 @@ static void h3xxx_lcd_power(int enable)
 }
 
 static struct map_desc h3600_io_desc[] __initdata = {
- /* virtual	       physical 	  length      type */
-  { H3600_BANK_2_VIRT, SA1100_CS2_PHYS,   0x02800000, MT_DEVICE }, /* static memory bank 2  CS#2 */
-  { H3600_BANK_4_VIRT, SA1100_CS4_PHYS,   0x00800000, MT_DEVICE }, /* static memory bank 4  CS#4 */
-  { H3600_EGPIO_VIRT,  H3600_EGPIO_PHYS,  0x01000000, MT_DEVICE }, /* EGPIO 0		CS#5 */
+  	{	/* static memory bank 2  CS#2 */
+		.virtual	=  H3600_BANK_2_VIRT,
+		.pfn		= __phys_to_pfn(SA1100_CS2_PHYS),
+		.length		= 0x02800000,
+		.type		= MT_DEVICE
+	}, {	/* static memory bank 4  CS#4 */
+		.virtual	=  H3600_BANK_4_VIRT,
+		.pfn		= __phys_to_pfn(SA1100_CS4_PHYS),
+		.length		= 0x00800000,
+		.type		= MT_DEVICE
+	}, {	/* EGPIO 0		CS#5 */
+		.virtual	=  H3600_EGPIO_VIRT,
+		.pfn		= __phys_to_pfn(H3600_EGPIO_PHYS),
+		.length		= 0x01000000,
+		.type		= MT_DEVICE
+	}
 };
 
 /*
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 502d65cfe654..c922e043c424 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -57,8 +57,12 @@ static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
  */
 
 static struct map_desc hackkit_io_desc[] __initdata = {
- /* virtual     physical    length      type */
-  { 0xe8000000, 0x00000000, 0x01000000, MT_DEVICE } /* Flash bank 0 */
+	{	/* Flash bank 0 */
+		.virtual	=  0xe8000000,
+		.pfn		= __phys_to_pfn(0x00000000),
+		.length		= 0x01000000,
+		.type		= MT_DEVICE
+	},
 };
 
 static struct sa1100_port_fns hackkit_port_fns __initdata = {
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 2f497112c96a..89af0c831e8f 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -8,6 +8,8 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
 
 #include <asm/hardware.h>
 #include <asm/hardware/sa1111.h>
@@ -16,6 +18,7 @@
 #include <asm/setup.h>
 
 #include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 
@@ -81,10 +84,22 @@ static int __init jornada720_init(void)
 arch_initcall(jornada720_init);
 
 static struct map_desc jornada720_io_desc[] __initdata = {
- /* virtual     physical    length      type */
-  { 0xf0000000, 0x48000000, 0x00100000, MT_DEVICE }, /* Epson registers */
-  { 0xf1000000, 0x48200000, 0x00100000, MT_DEVICE }, /* Epson frame buffer */
-  { 0xf4000000, 0x40000000, 0x00100000, MT_DEVICE }  /* SA-1111 */
+	{	/* Epson registers */
+		.virtual	=  0xf0000000,
+		.pfn		= __phys_to_pfn(0x48000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* Epson frame buffer */
+		.virtual	=  0xf1000000,
+		.pfn		= __phys_to_pfn(0x48200000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {	/* SA-1111 */
+		.virtual	=  0xf4000000,
+		.pfn		= __phys_to_pfn(0x40000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init jornada720_map_io(void)
@@ -96,6 +111,66 @@ static void __init jornada720_map_io(void)
 	sa1100_register_uart(1, 1);
 }
 
+static struct mtd_partition jornada720_partitions[] = {
+	{
+		.name		= "JORNADA720 boot firmware",
+		.size		= 0x00040000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
+	}, {
+		.name		= "JORNADA720 kernel",
+		.size		= 0x000c0000,
+		.offset		= 0x00040000,
+	}, {
+		.name		= "JORNADA720 params",
+		.size		= 0x00040000,
+		.offset		= 0x00100000,
+	}, {
+		.name		= "JORNADA720 initrd",
+		.size		= 0x00100000,
+		.offset		= 0x00140000,
+	}, {
+		.name		= "JORNADA720 root cramfs",
+		.size		= 0x00300000,
+		.offset		= 0x00240000,
+	}, {
+		.name		= "JORNADA720 usr cramfs",
+		.size		= 0x00800000,
+		.offset		= 0x00540000,
+	}, {
+		.name		= "JORNADA720 usr local",
+		.size		= 0,  /* will expand to the end of the flash */
+		.offset		= 0x00d00000,
+	}
+};
+
+static void jornada720_set_vpp(int vpp)
+{
+	if (vpp)
+		PPSR |= 0x80;
+	else
+		PPSR &= ~0x80;
+	PPDR |= 0x80;
+}
+
+static struct flash_platform_data jornada720_flash_data = {
+	.map_name	= "cfi_probe",
+	.set_vpp	= jornada720_set_vpp,
+	.parts		= jornada720_partitions,
+	.nr_parts	= ARRAY_SIZE(jornada720_partitions),
+};
+
+static struct resource jornada720_flash_resource = {
+	.start		= SA1100_CS0_PHYS,
+	.end		= SA1100_CS0_PHYS + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static void __init jornada720_mach_init(void)
+{
+	sa11x0_set_flash_data(&jornada720_flash_data, &jornada720_flash_resource, 1);
+}
+
 MACHINE_START(JORNADA720, "HP Jornada 720")
 	/* Maintainer: Michael Gernoth <michael@gernoth.net> */
 	.phys_ram	= 0xc0000000,
@@ -105,4 +180,5 @@ MACHINE_START(JORNADA720, "HP Jornada 720")
 	.map_io		= jornada720_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
+	.init_machine	= jornada720_mach_init,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index ed6744d480af..8c9e3dd52942 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -31,9 +31,17 @@ static void __init lart_init(void)
 }
 
 static struct map_desc lart_io_desc[] __initdata = {
- /* virtual     physical    length      type */
-  { 0xe8000000, 0x00000000, 0x00400000, MT_DEVICE }, /* main flash memory */
-  { 0xec000000, 0x08000000, 0x00400000, MT_DEVICE }  /* main flash, alternative location */
+	{	/* main flash memory */
+		.virtual	=  0xe8000000,
+		.pfn		= __phys_to_pfn(0x00000000),
+		.length		= 0x00400000,
+		.type		= MT_DEVICE
+	}, {	/* main flash, alternative location */
+		.virtual	=  0xec000000,
+		.pfn		= __phys_to_pfn(0x08000000),
+		.length		= 0x00400000,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init lart_map_io(void)
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index fc061641b7be..052e4caedb89 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -178,33 +178,27 @@ static int neponset_probe(struct device *dev)
 /*
  * LDM power management.
  */
-static int neponset_suspend(struct device *dev, pm_message_t state, u32 level)
+static int neponset_suspend(struct device *dev, pm_message_t state)
 {
 	/*
 	 * Save state.
 	 */
-	if (level == SUSPEND_SAVE_STATE ||
-	    level == SUSPEND_DISABLE ||
-	    level == SUSPEND_POWER_DOWN) {
-		if (!dev->power.saved_state)
-			dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL);
-		if (!dev->power.saved_state)
-			return -ENOMEM;
-
-		*(unsigned int *)dev->power.saved_state = NCR_0;
-	}
+	if (!dev->power.saved_state)
+		dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL);
+	if (!dev->power.saved_state)
+		return -ENOMEM;
+
+	*(unsigned int *)dev->power.saved_state = NCR_0;
 
 	return 0;
 }
 
-static int neponset_resume(struct device *dev, u32 level)
+static int neponset_resume(struct device *dev)
 {
-	if (level == RESUME_RESTORE_STATE || level == RESUME_ENABLE) {
-		if (dev->power.saved_state) {
-			NCR_0 = *(unsigned int *)dev->power.saved_state;
-			kfree(dev->power.saved_state);
-			dev->power.saved_state = NULL;
-		}
+	if (dev->power.saved_state) {
+		NCR_0 = *(unsigned int *)dev->power.saved_state;
+		kfree(dev->power.saved_state);
+		dev->power.saved_state = NULL;
 	}
 
 	return 0;
@@ -331,9 +325,17 @@ static int __init neponset_init(void)
 subsys_initcall(neponset_init);
 
 static struct map_desc neponset_io_desc[] __initdata = {
- /* virtual     physical    length type */
-  { 0xf3000000, 0x10000000, SZ_1M, MT_DEVICE }, /* System Registers */
-  { 0xf4000000, 0x40000000, SZ_1M, MT_DEVICE }  /* SA-1111 */
+	{	/* System Registers */
+		.virtual	=  0xf3000000,
+		.pfn		= __phys_to_pfn(0x10000000),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	}, {	/* SA-1111 */
+		.virtual	=  0xf4000000,
+		.pfn		= __phys_to_pfn(0x40000000),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	}
 };
 
 void __init neponset_map_io(void)
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 07f6d5fd7bb0..cfb6658e5cdf 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -60,11 +60,17 @@ EXPORT_SYMBOL(set_cs3_bit);
 EXPORT_SYMBOL(clear_cs3_bit);
 
 static struct map_desc simpad_io_desc[] __initdata = {
-        /* virtual	physical    length	type */
-	/* MQ200 */
-	{ 0xf2800000, 0x4b800000, 0x00800000, MT_DEVICE },
-	/* Paules CS3, write only */
-	{ 0xf1000000, 0x18000000, 0x00100000, MT_DEVICE },
+	{	/* MQ200 */
+		.virtual	=  0xf2800000,
+		.pfn		= __phys_to_pfn(0x4b800000),
+		.length		= 0x00800000,
+		.type		= MT_DEVICE
+	}, {	/* Paules CS3, write only */
+		.virtual	=  0xf1000000,
+		.pfn		= __phys_to_pfn(0x18000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	},
 };
 
 
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index 946c0d11c73b..2d428b6dbb58 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -62,7 +62,12 @@ arch_initcall(shark_init);
 extern void shark_init_irq(void);
 
 static struct map_desc shark_io_desc[] __initdata = {
-	{ IO_BASE	, IO_START	, IO_SIZE	, MT_DEVICE }
+	{
+		.virtual	= IO_BASE,
+		.pfn		= __phys_to_pfn(IO_START),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	}
 };
 
 static void __init shark_map_io(void)
diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c
index 48025c2b9987..b96a2ea15d41 100644
--- a/arch/arm/mach-versatile/clock.c
+++ b/arch/arm/mach-versatile/clock.c
@@ -13,6 +13,7 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/string.h>
 
 #include <asm/semaphore.h>
 #include <asm/hardware/clock.h>
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index a30e0451df72..7e4bdd07f4af 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -186,25 +186,82 @@ void __init versatile_init_irq(void)
 }
 
 static struct map_desc versatile_io_desc[] __initdata = {
- { IO_ADDRESS(VERSATILE_SYS_BASE),   VERSATILE_SYS_BASE,   SZ_4K,      MT_DEVICE },
- { IO_ADDRESS(VERSATILE_SIC_BASE),   VERSATILE_SIC_BASE,   SZ_4K,      MT_DEVICE },
- { IO_ADDRESS(VERSATILE_VIC_BASE),   VERSATILE_VIC_BASE,   SZ_4K,      MT_DEVICE },
- { IO_ADDRESS(VERSATILE_SCTL_BASE),  VERSATILE_SCTL_BASE,  SZ_4K * 9,  MT_DEVICE },
+	{
+		.virtual	=  IO_ADDRESS(VERSATILE_SYS_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_SYS_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  IO_ADDRESS(VERSATILE_SIC_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_SIC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  IO_ADDRESS(VERSATILE_VIC_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_VIC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  IO_ADDRESS(VERSATILE_SCTL_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_SCTL_BASE),
+		.length		= SZ_4K * 9,
+		.type		= MT_DEVICE
+	},
 #ifdef CONFIG_MACH_VERSATILE_AB
- { IO_ADDRESS(VERSATILE_GPIO0_BASE), VERSATILE_GPIO0_BASE, SZ_4K,      MT_DEVICE },
- { IO_ADDRESS(VERSATILE_IB2_BASE),   VERSATILE_IB2_BASE,   SZ_64M,     MT_DEVICE },
+ 	{
+		.virtual	=  IO_ADDRESS(VERSATILE_GPIO0_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_GPIO0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  IO_ADDRESS(VERSATILE_IB2_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_IB2_BASE),
+		.length		= SZ_64M,
+		.type		= MT_DEVICE
+	},
 #endif
 #ifdef CONFIG_DEBUG_LL
- { IO_ADDRESS(VERSATILE_UART0_BASE), VERSATILE_UART0_BASE, SZ_4K,      MT_DEVICE },
+ 	{
+		.virtual	=  IO_ADDRESS(VERSATILE_UART0_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	},
 #endif
 #ifdef CONFIG_PCI
- { IO_ADDRESS(VERSATILE_PCI_CORE_BASE), VERSATILE_PCI_CORE_BASE, SZ_4K, MT_DEVICE },
- { VERSATILE_PCI_VIRT_BASE,          VERSATILE_PCI_BASE,   VERSATILE_PCI_BASE_SIZE, MT_DEVICE },
- { VERSATILE_PCI_CFG_VIRT_BASE,      VERSATILE_PCI_CFG_BASE, VERSATILE_PCI_CFG_BASE_SIZE, MT_DEVICE },
+ 	{
+		.virtual	=  IO_ADDRESS(VERSATILE_PCI_CORE_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_PCI_CORE_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  VERSATILE_PCI_VIRT_BASE,
+		.pfn		= __phys_to_pfn(VERSATILE_PCI_BASE),
+		.length		= VERSATILE_PCI_BASE_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  VERSATILE_PCI_CFG_VIRT_BASE,
+		.pfn		= __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
+		.length		= VERSATILE_PCI_CFG_BASE_SIZE,
+		.type		= MT_DEVICE
+	},
 #if 0
- { VERSATILE_PCI_VIRT_MEM_BASE0,     VERSATILE_PCI_MEM_BASE0, SZ_16M,  MT_DEVICE },
- { VERSATILE_PCI_VIRT_MEM_BASE1,     VERSATILE_PCI_MEM_BASE1, SZ_16M,  MT_DEVICE },
- { VERSATILE_PCI_VIRT_MEM_BASE2,     VERSATILE_PCI_MEM_BASE2, SZ_16M,  MT_DEVICE },
+ 	{
+		.virtual	=  VERSATILE_PCI_VIRT_MEM_BASE0,
+		.pfn		= __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  VERSATILE_PCI_VIRT_MEM_BASE1,
+		.pfn		= __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  VERSATILE_PCI_VIRT_MEM_BASE2,
+		.pfn		= __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	},
 #endif
 #endif
 };
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
index 26356ce4da54..47b0b767f080 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/consistent.c
@@ -75,7 +75,7 @@ static struct vm_region consistent_head = {
 };
 
 static struct vm_region *
-vm_region_alloc(struct vm_region *head, size_t size, int gfp)
+vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp)
 {
 	unsigned long addr = head->vm_start, end = head->vm_end - size;
 	unsigned long flags;
@@ -133,7 +133,7 @@ static struct vm_region *vm_region_find(struct vm_region *head, unsigned long ad
 #endif
 
 static void *
-__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, int gfp,
+__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	    pgprot_t prot)
 {
 	struct page *page;
@@ -251,7 +251,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, int gfp,
  * virtual and bus address for that space.
  */
 void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp)
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
 {
 	return __dma_alloc(dev, size, handle, gfp,
 			   pgprot_noncached(pgprot_kernel));
@@ -263,7 +263,7 @@ EXPORT_SYMBOL(dma_alloc_coherent);
  * dma_alloc_coherent above.
  */
 void *
-dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, int gfp)
+dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
 {
 	return __dma_alloc(dev, size, handle, gfp,
 			   pgprot_writecombine(pgprot_kernel));
@@ -397,8 +397,6 @@ static int __init consistent_init(void)
 	pte_t *pte;
 	int ret = 0;
 
-	spin_lock(&init_mm.page_table_lock);
-
 	do {
 		pgd = pgd_offset(&init_mm, CONSISTENT_BASE);
 		pmd = pmd_alloc(&init_mm, pgd, CONSISTENT_BASE);
@@ -409,7 +407,7 @@ static int __init consistent_init(void)
 		}
 		WARN_ON(!pmd_none(*pmd));
 
-		pte = pte_alloc_kernel(&init_mm, pmd, CONSISTENT_BASE);
+		pte = pte_alloc_kernel(pmd, CONSISTENT_BASE);
 		if (!pte) {
 			printk(KERN_ERR "%s: no pte tables\n", __func__);
 			ret = -ENOMEM;
@@ -419,8 +417,6 @@ static int __init consistent_init(void)
 		consistent_pte = pte;
 	} while (0);
 
-	spin_unlock(&init_mm.page_table_lock);
-
 	return ret;
 }
 
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 27d041574ea7..269ce6913ee9 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -22,9 +22,7 @@
 #endif
 
 #define from_address	(0xffff8000)
-#define from_pgprot	PAGE_KERNEL
 #define to_address	(0xffffc000)
-#define to_pgprot	PAGE_KERNEL
 
 #define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
 
@@ -34,7 +32,7 @@ static DEFINE_SPINLOCK(v6_lock);
  * Copy the user page.  No aliasing to deal with so we can just
  * attack the kernel's existing mapping of these pages.
  */
-void v6_copy_user_page_nonaliasing(void *kto, const void *kfrom, unsigned long vaddr)
+static void v6_copy_user_page_nonaliasing(void *kto, const void *kfrom, unsigned long vaddr)
 {
 	copy_page(kto, kfrom);
 }
@@ -43,7 +41,7 @@ void v6_copy_user_page_nonaliasing(void *kto, const void *kfrom, unsigned long v
  * Clear the user page.  No aliasing to deal with so we can just
  * attack the kernel's existing mapping of this page.
  */
-void v6_clear_user_page_nonaliasing(void *kaddr, unsigned long vaddr)
+static void v6_clear_user_page_nonaliasing(void *kaddr, unsigned long vaddr)
 {
 	clear_page(kaddr);
 }
@@ -51,7 +49,7 @@ void v6_clear_user_page_nonaliasing(void *kaddr, unsigned long vaddr)
 /*
  * Copy the page, taking account of the cache colour.
  */
-void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vaddr)
+static void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vaddr)
 {
 	unsigned int offset = CACHE_COLOUR(vaddr);
 	unsigned long from, to;
@@ -72,8 +70,8 @@ void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vadd
 	 */
 	spin_lock(&v6_lock);
 
-	set_pte(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, from_pgprot));
-	set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, to_pgprot));
+	set_pte(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, PAGE_KERNEL));
+	set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, PAGE_KERNEL));
 
 	from = from_address + (offset << PAGE_SHIFT);
 	to   = to_address + (offset << PAGE_SHIFT);
@@ -91,7 +89,7 @@ void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vadd
  * so remap the kernel page into the same cache colour as the user
  * page.
  */
-void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr)
+static void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr)
 {
 	unsigned int offset = CACHE_COLOUR(vaddr);
 	unsigned long to = to_address + (offset << PAGE_SHIFT);
@@ -112,7 +110,7 @@ void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr)
 	 */
 	spin_lock(&v6_lock);
 
-	set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, to_pgprot));
+	set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, PAGE_KERNEL));
 	flush_tlb_kernel_page(to);
 	clear_page((void *)to);
 
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index be4ab3d73c91..7fc1b35a6746 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -26,6 +26,11 @@ static unsigned long shared_pte_mask = L_PTE_CACHEABLE;
 /*
  * We take the easy way out of this problem - we make the
  * PTE uncacheable.  However, we leave the write buffer on.
+ *
+ * Note that the pte lock held when calling update_mmu_cache must also
+ * guard the pte (somewhere else in the same mm) that we modify here.
+ * Therefore those configurations which might call adjust_pte (those
+ * without CONFIG_CPU_CACHE_VIPT) cannot support split page_table_lock.
  */
 static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
 {
@@ -127,7 +132,7 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page);
  *  2. If we have multiple shared mappings of the same space in
  *     an object, we need to deal with the cache aliasing issues.
  *
- * Note that the page_table_lock will be held.
+ * Note that the pte lock will be held.
  */
 void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
 {
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index edffa47a4b2a..fd079ff1fc53 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/mm/init.c
  *
- *  Copyright (C) 1995-2002 Russell King
+ *  Copyright (C) 1995-2005 Russell King
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -86,14 +86,19 @@ void show_mem(void)
 	printk("%d pages swap cached\n", cached);
 }
 
-struct node_info {
-	unsigned int start;
-	unsigned int end;
-	int bootmap_pages;
-};
+static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
+{
+	return pmd_offset(pgd, virt);
+}
+
+static inline pmd_t *pmd_off_k(unsigned long virt)
+{
+	return pmd_off(pgd_offset_k(virt), virt);
+}
 
-#define O_PFN_DOWN(x)	((x) >> PAGE_SHIFT)
-#define O_PFN_UP(x)	(PAGE_ALIGN(x) >> PAGE_SHIFT)
+#define for_each_nodebank(iter,mi,no)			\
+	for (iter = 0; iter < mi->nr_banks; iter++)	\
+		if (mi->bank[iter].node == no)
 
 /*
  * FIXME: We really want to avoid allocating the bootmap bitmap
@@ -106,15 +111,12 @@ find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages)
 {
 	unsigned int start_pfn, bank, bootmap_pfn;
 
-	start_pfn   = O_PFN_UP(__pa(&_end));
+	start_pfn   = PAGE_ALIGN(__pa(&_end)) >> PAGE_SHIFT;
 	bootmap_pfn = 0;
 
-	for (bank = 0; bank < mi->nr_banks; bank ++) {
+	for_each_nodebank(bank, mi, node) {
 		unsigned int start, end;
 
-		if (mi->bank[bank].node != node)
-			continue;
-
 		start = mi->bank[bank].start >> PAGE_SHIFT;
 		end   = (mi->bank[bank].size +
 			 mi->bank[bank].start) >> PAGE_SHIFT;
@@ -140,92 +142,6 @@ find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages)
 	return bootmap_pfn;
 }
 
-/*
- * Scan the memory info structure and pull out:
- *  - the end of memory
- *  - the number of nodes
- *  - the pfn range of each node
- *  - the number of bootmem bitmap pages
- */
-static unsigned int __init
-find_memend_and_nodes(struct meminfo *mi, struct node_info *np)
-{
-	unsigned int i, bootmem_pages = 0, memend_pfn = 0;
-
-	for (i = 0; i < MAX_NUMNODES; i++) {
-		np[i].start = -1U;
-		np[i].end = 0;
-		np[i].bootmap_pages = 0;
-	}
-
-	for (i = 0; i < mi->nr_banks; i++) {
-		unsigned long start, end;
-		int node;
-
-		if (mi->bank[i].size == 0) {
-			/*
-			 * Mark this bank with an invalid node number
-			 */
-			mi->bank[i].node = -1;
-			continue;
-		}
-
-		node = mi->bank[i].node;
-
-		/*
-		 * Make sure we haven't exceeded the maximum number of nodes
-		 * that we have in this configuration.  If we have, we're in
-		 * trouble.  (maybe we ought to limit, instead of bugging?)
-		 */
-		if (node >= MAX_NUMNODES)
-			BUG();
-		node_set_online(node);
-
-		/*
-		 * Get the start and end pfns for this bank
-		 */
-		start = mi->bank[i].start >> PAGE_SHIFT;
-		end   = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT;
-
-		if (np[node].start > start)
-			np[node].start = start;
-
-		if (np[node].end < end)
-			np[node].end = end;
-
-		if (memend_pfn < end)
-			memend_pfn = end;
-	}
-
-	/*
-	 * Calculate the number of pages we require to
-	 * store the bootmem bitmaps.
-	 */
-	for_each_online_node(i) {
-		if (np[i].end == 0)
-			continue;
-
-		np[i].bootmap_pages = bootmem_bootmap_pages(np[i].end -
-							    np[i].start);
-		bootmem_pages += np[i].bootmap_pages;
-	}
-
-	high_memory = __va(memend_pfn << PAGE_SHIFT);
-
-	/*
-	 * This doesn't seem to be used by the Linux memory
-	 * manager any more.  If we can get rid of it, we
-	 * also get rid of some of the stuff above as well.
-	 *
-	 * Note: max_low_pfn and max_pfn reflect the number
-	 * of _pages_ in the system, not the maximum PFN.
-	 */
-	max_low_pfn = memend_pfn - O_PFN_DOWN(PHYS_OFFSET);
-	max_pfn = memend_pfn - O_PFN_DOWN(PHYS_OFFSET);
-
-	return bootmem_pages;
-}
-
 static int __init check_initrd(struct meminfo *mi)
 {
 	int initrd_node = -2;
@@ -266,9 +182,8 @@ static int __init check_initrd(struct meminfo *mi)
 /*
  * Reserve the various regions of node 0
  */
-static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int bootmap_pages)
+static __init void reserve_node_zero(pg_data_t *pgdat)
 {
-	pg_data_t *pgdat = NODE_DATA(0);
 	unsigned long res_size = 0;
 
 	/*
@@ -289,13 +204,6 @@ static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int boot
 			     PTRS_PER_PGD * sizeof(pgd_t));
 
 	/*
-	 * And don't forget to reserve the allocator bitmap,
-	 * which will be freed later.
-	 */
-	reserve_bootmem_node(pgdat, bootmap_pfn << PAGE_SHIFT,
-			     bootmap_pages << PAGE_SHIFT);
-
-	/*
 	 * Hmm... This should go elsewhere, but we really really need to
 	 * stop things allocating the low memory; ideally we need a better
 	 * implementation of GFP_DMA which does not assume that DMA-able
@@ -324,183 +232,284 @@ static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int boot
 		reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size);
 }
 
-/*
- * Register all available RAM in this node with the bootmem allocator.
- */
-static inline void free_bootmem_node_bank(int node, struct meminfo *mi)
+void __init build_mem_type_table(void);
+void __init create_mapping(struct map_desc *md);
+
+static unsigned long __init
+bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 {
-	pg_data_t *pgdat = NODE_DATA(node);
-	int bank;
+	unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
+	unsigned long start_pfn, end_pfn, boot_pfn;
+	unsigned int boot_pages;
+	pg_data_t *pgdat;
+	int i;
 
-	for (bank = 0; bank < mi->nr_banks; bank++)
-		if (mi->bank[bank].node == node)
-			free_bootmem_node(pgdat, mi->bank[bank].start,
-					  mi->bank[bank].size);
-}
+	start_pfn = -1UL;
+	end_pfn = 0;
 
-/*
- * Initialise the bootmem allocator for all nodes.  This is called
- * early during the architecture specific initialisation.
- */
-static void __init bootmem_init(struct meminfo *mi)
-{
-	struct node_info node_info[MAX_NUMNODES], *np = node_info;
-	unsigned int bootmap_pages, bootmap_pfn, map_pg;
-	int node, initrd_node;
+	/*
+	 * Calculate the pfn range, and map the memory banks for this node.
+	 */
+	for_each_nodebank(i, mi, node) {
+		unsigned long start, end;
+		struct map_desc map;
 
-	bootmap_pages = find_memend_and_nodes(mi, np);
-	bootmap_pfn   = find_bootmap_pfn(0, mi, bootmap_pages);
-	initrd_node   = check_initrd(mi);
+		start = mi->bank[i].start >> PAGE_SHIFT;
+		end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT;
+
+		if (start_pfn > start)
+			start_pfn = start;
+		if (end_pfn < end)
+			end_pfn = end;
 
-	map_pg = bootmap_pfn;
+		map.pfn = __phys_to_pfn(mi->bank[i].start);
+		map.virtual = __phys_to_virt(mi->bank[i].start);
+		map.length = mi->bank[i].size;
+		map.type = MT_MEMORY;
+
+		create_mapping(&map);
+	}
 
 	/*
-	 * Initialise the bootmem nodes.
-	 *
-	 * What we really want to do is:
-	 *
-	 *   unmap_all_regions_except_kernel();
-	 *   for_each_node_in_reverse_order(node) {
-	 *     map_node(node);
-	 *     allocate_bootmem_map(node);
-	 *     init_bootmem_node(node);
-	 *     free_bootmem_node(node);
-	 *   }
-	 *
-	 * but this is a 2.5-type change.  For now, we just set
-	 * the nodes up in reverse order.
-	 *
-	 * (we could also do with rolling bootmem_init and paging_init
-	 * into one generic "memory_init" type function).
+	 * If there is no memory in this node, ignore it.
 	 */
-	np += num_online_nodes() - 1;
-	for (node = num_online_nodes() - 1; node >= 0; node--, np--) {
-		/*
-		 * If there are no pages in this node, ignore it.
-		 * Note that node 0 must always have some pages.
-		 */
-		if (np->end == 0 || !node_online(node)) {
-			if (node == 0)
-				BUG();
-			continue;
-		}
+	if (end_pfn == 0)
+		return end_pfn;
 
-		/*
-		 * Initialise the bootmem allocator.
-		 */
-		init_bootmem_node(NODE_DATA(node), map_pg, np->start, np->end);
-		free_bootmem_node_bank(node, mi);
-		map_pg += np->bootmap_pages;
+	/*
+	 * Allocate the bootmem bitmap page.
+	 */
+	boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
+	boot_pfn = find_bootmap_pfn(node, mi, boot_pages);
 
-		/*
-		 * If this is node 0, we need to reserve some areas ASAP -
-		 * we may use bootmem on node 0 to setup the other nodes.
-		 */
-		if (node == 0)
-			reserve_node_zero(bootmap_pfn, bootmap_pages);
-	}
+	/*
+	 * Initialise the bootmem allocator for this node, handing the
+	 * memory banks over to bootmem.
+	 */
+	node_set_online(node);
+	pgdat = NODE_DATA(node);
+	init_bootmem_node(pgdat, boot_pfn, start_pfn, end_pfn);
+
+	for_each_nodebank(i, mi, node)
+		free_bootmem_node(pgdat, mi->bank[i].start, mi->bank[i].size);
 
+	/*
+	 * Reserve the bootmem bitmap for this node.
+	 */
+	reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
+			     boot_pages << PAGE_SHIFT);
 
 #ifdef CONFIG_BLK_DEV_INITRD
-	if (phys_initrd_size && initrd_node >= 0) {
-		reserve_bootmem_node(NODE_DATA(initrd_node), phys_initrd_start,
+	/*
+	 * If the initrd is in this node, reserve its memory.
+	 */
+	if (node == initrd_node) {
+		reserve_bootmem_node(pgdat, phys_initrd_start,
 				     phys_initrd_size);
 		initrd_start = __phys_to_virt(phys_initrd_start);
 		initrd_end = initrd_start + phys_initrd_size;
 	}
 #endif
 
-	BUG_ON(map_pg != bootmap_pfn + bootmap_pages);
+	/*
+	 * Finally, reserve any node zero regions.
+	 */
+	if (node == 0)
+		reserve_node_zero(pgdat);
+
+	/*
+	 * initialise the zones within this node.
+	 */
+	memset(zone_size, 0, sizeof(zone_size));
+	memset(zhole_size, 0, sizeof(zhole_size));
+
+	/*
+	 * The size of this node has already been determined.  If we need
+	 * to do anything fancy with the allocation of this memory to the
+	 * zones, now is the time to do it.
+	 */
+	zone_size[0] = end_pfn - start_pfn;
+
+	/*
+	 * For each bank in this node, calculate the size of the holes.
+	 *  holes = node_size - sum(bank_sizes_in_node)
+	 */
+	zhole_size[0] = zone_size[0];
+	for_each_nodebank(i, mi, node)
+		zhole_size[0] -= mi->bank[i].size >> PAGE_SHIFT;
+
+	/*
+	 * Adjust the sizes according to any special requirements for
+	 * this machine type.
+	 */
+	arch_adjust_zones(node, zone_size, zhole_size);
+
+	free_area_init_node(node, pgdat, zone_size, start_pfn, zhole_size);
+
+	return end_pfn;
 }
 
-/*
- * paging_init() sets up the page tables, initialises the zone memory
- * maps, and sets up the zero page, bad page and bad page tables.
- */
-void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
+static void __init bootmem_init(struct meminfo *mi)
 {
-	void *zero_page;
-	int node;
+	unsigned long addr, memend_pfn = 0;
+	int node, initrd_node, i;
 
-	bootmem_init(mi);
+	/*
+	 * Invalidate the node number for empty or invalid memory banks
+	 */
+	for (i = 0; i < mi->nr_banks; i++)
+		if (mi->bank[i].size == 0 || mi->bank[i].node >= MAX_NUMNODES)
+			mi->bank[i].node = -1;
 
 	memcpy(&meminfo, mi, sizeof(meminfo));
 
 	/*
-	 * allocate the zero page.  Note that we count on this going ok.
+	 * Clear out all the mappings below the kernel image.
 	 */
-	zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
+	for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
+#ifdef CONFIG_XIP_KERNEL
+	/* The XIP kernel is mapped in the module area -- skip over it */
+	addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
+#endif
+	for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
 
 	/*
-	 * initialise the page tables.
+	 * Clear out all the kernel space mappings, except for the first
+	 * memory bank, up to the end of the vmalloc region.
 	 */
-	memtable_init(mi);
-	if (mdesc->map_io)
-		mdesc->map_io();
-	local_flush_tlb_all();
+	for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size);
+	     addr < VMALLOC_END; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
 
 	/*
-	 * initialise the zones within each node
+	 * Locate which node contains the ramdisk image, if any.
 	 */
-	for_each_online_node(node) {
-		unsigned long zone_size[MAX_NR_ZONES];
-		unsigned long zhole_size[MAX_NR_ZONES];
-		struct bootmem_data *bdata;
-		pg_data_t *pgdat;
-		int i;
+	initrd_node = check_initrd(mi);
 
-		/*
-		 * Initialise the zone size information.
-		 */
-		for (i = 0; i < MAX_NR_ZONES; i++) {
-			zone_size[i]  = 0;
-			zhole_size[i] = 0;
-		}
+	/*
+	 * Run through each node initialising the bootmem allocator.
+	 */
+	for_each_node(node) {
+		unsigned long end_pfn;
 
-		pgdat = NODE_DATA(node);
-		bdata = pgdat->bdata;
+		end_pfn = bootmem_init_node(node, initrd_node, mi);
 
 		/*
-		 * The size of this node has already been determined.
-		 * If we need to do anything fancy with the allocation
-		 * of this memory to the zones, now is the time to do
-		 * it.
+		 * Remember the highest memory PFN.
 		 */
-		zone_size[0] = bdata->node_low_pfn -
-				(bdata->node_boot_start >> PAGE_SHIFT);
+		if (end_pfn > memend_pfn)
+			memend_pfn = end_pfn;
+	}
 
-		/*
-		 * If this zone has zero size, skip it.
-		 */
-		if (!zone_size[0])
-			continue;
+	high_memory = __va(memend_pfn << PAGE_SHIFT);
 
-		/*
-		 * For each bank in this node, calculate the size of the
-		 * holes.  holes = node_size - sum(bank_sizes_in_node)
-		 */
-		zhole_size[0] = zone_size[0];
-		for (i = 0; i < mi->nr_banks; i++) {
-			if (mi->bank[i].node != node)
-				continue;
+	/*
+	 * This doesn't seem to be used by the Linux memory manager any
+	 * more, but is used by ll_rw_block.  If we can get rid of it, we
+	 * also get rid of some of the stuff above as well.
+	 *
+	 * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
+	 * the system, not the maximum PFN.
+	 */
+	max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
+}
 
-			zhole_size[0] -= mi->bank[i].size >> PAGE_SHIFT;
-		}
+/*
+ * Set up device the mappings.  Since we clear out the page tables for all
+ * mappings above VMALLOC_END, we will remove any debug device mappings.
+ * This means you have to be careful how you debug this function, or any
+ * called function.  (Do it by code inspection!)
+ */
+static void __init devicemaps_init(struct machine_desc *mdesc)
+{
+	struct map_desc map;
+	unsigned long addr;
+	void *vectors;
 
-		/*
-		 * Adjust the sizes according to any special
-		 * requirements for this machine type.
-		 */
-		arch_adjust_zones(node, zone_size, zhole_size);
+	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
 
-		free_area_init_node(node, pgdat, zone_size,
-				bdata->node_boot_start >> PAGE_SHIFT, zhole_size);
+	/*
+	 * Map the kernel if it is XIP.
+	 * It is always first in the modulearea.
+	 */
+#ifdef CONFIG_XIP_KERNEL
+	map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & PGDIR_MASK);
+	map.virtual = MODULE_START;
+	map.length = ((unsigned long)&_etext - map.virtual + ~PGDIR_MASK) & PGDIR_MASK;
+	map.type = MT_ROM;
+	create_mapping(&map);
+#endif
+
+	/*
+	 * Map the cache flushing regions.
+	 */
+#ifdef FLUSH_BASE
+	map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
+	map.virtual = FLUSH_BASE;
+	map.length = PGDIR_SIZE;
+	map.type = MT_CACHECLEAN;
+	create_mapping(&map);
+#endif
+#ifdef FLUSH_BASE_MINICACHE
+	map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + PGDIR_SIZE);
+	map.virtual = FLUSH_BASE_MINICACHE;
+	map.length = PGDIR_SIZE;
+	map.type = MT_MINICLEAN;
+	create_mapping(&map);
+#endif
+
+	flush_cache_all();
+	local_flush_tlb_all();
+
+	vectors = alloc_bootmem_low_pages(PAGE_SIZE);
+	BUG_ON(!vectors);
+
+	/*
+	 * Create a mapping for the machine vectors at the high-vectors
+	 * location (0xffff0000).  If we aren't using high-vectors, also
+	 * create a mapping at the low-vectors virtual address.
+	 */
+	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
+	map.virtual = 0xffff0000;
+	map.length = PAGE_SIZE;
+	map.type = MT_HIGH_VECTORS;
+	create_mapping(&map);
+
+	if (!vectors_high()) {
+		map.virtual = 0;
+		map.type = MT_LOW_VECTORS;
+		create_mapping(&map);
 	}
 
 	/*
-	 * finish off the bad pages once
-	 * the mem_map is initialised
+	 * Ask the machine support to map in the statically mapped devices.
+	 * After this point, we can start to touch devices again.
+	 */
+	if (mdesc->map_io)
+		mdesc->map_io();
+}
+
+/*
+ * paging_init() sets up the page tables, initialises the zone memory
+ * maps, and sets up the zero page, bad page and bad page tables.
+ */
+void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
+{
+	void *zero_page;
+
+	build_mem_type_table();
+	bootmem_init(mi);
+	devicemaps_init(mdesc);
+
+	top_pmd = pmd_off_k(0xffff0000);
+
+	/*
+	 * allocate the zero page.  Note that we count on this going ok.
 	 */
+	zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
 	memzero(zero_page, PAGE_SIZE);
 	empty_zero_page = virt_to_page(zero_page);
 	flush_dcache_page(empty_zero_page);
@@ -562,10 +571,7 @@ static void __init free_unused_memmap_node(int node, struct meminfo *mi)
 	 * may not be the case, especially if the user has provided the
 	 * information on the command line.
 	 */
-	for (i = 0; i < mi->nr_banks; i++) {
-		if (mi->bank[i].size == 0 || mi->bank[i].node != node)
-			continue;
-
+	for_each_nodebank(i, mi, node) {
 		bank_start = mi->bank[i].start >> PAGE_SHIFT;
 		if (bank_start < prev_bank_end) {
 			printk(KERN_ERR "MEM: unordered memory banks.  "
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 7110e54182b1..0f128c28fee4 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -26,6 +26,7 @@
 #include <linux/vmalloc.h>
 
 #include <asm/cacheflush.h>
+#include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/tlbflush.h>
 
@@ -74,7 +75,7 @@ remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
 
 	pgprot = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_WRITE | flags);
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, address + phys_addr, pgprot);
@@ -96,7 +97,6 @@ remap_area_pages(unsigned long start, unsigned long phys_addr,
 	phys_addr -= address;
 	dir = pgd_offset(&init_mm, address);
 	BUG_ON(address >= end);
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		pmd_t *pmd = pmd_alloc(&init_mm, dir, address);
 		if (!pmd) {
@@ -113,7 +113,6 @@ remap_area_pages(unsigned long start, unsigned long phys_addr,
 		dir++;
 	} while (address && (address < end));
 
-	spin_unlock(&init_mm.page_table_lock);
 	flush_cache_vmap(start, end);
 	return err;
 }
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index d125a3dc061c..1221fdde1769 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/mm/mm-armv.c
  *
- *  Copyright (C) 1998-2002 Russell King
+ *  Copyright (C) 1998-2005 Russell King
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -180,11 +180,6 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 
 	if (!vectors_high()) {
 		/*
-		 * This lock is here just to satisfy pmd_alloc and pte_lock
-		 */
-		spin_lock(&mm->page_table_lock);
-
-		/*
 		 * On ARM, first page must always be allocated since it
 		 * contains the machine vectors.
 		 */
@@ -201,23 +196,14 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 		set_pte(new_pte, *init_pte);
 		pte_unmap_nested(init_pte);
 		pte_unmap(new_pte);
-
-		spin_unlock(&mm->page_table_lock);
 	}
 
 	return new_pgd;
 
 no_pte:
-	spin_unlock(&mm->page_table_lock);
 	pmd_free(new_pmd);
-	free_pages((unsigned long)new_pgd, 2);
-	return NULL;
-
 no_pmd:
-	spin_unlock(&mm->page_table_lock);
 	free_pages((unsigned long)new_pgd, 2);
-	return NULL;
-
 no_pgd:
 	return NULL;
 }
@@ -243,6 +229,7 @@ void free_pgd_slow(pgd_t *pgd)
 	pte = pmd_page(*pmd);
 	pmd_clear(pmd);
 	dec_page_state(nr_page_table_pages);
+	pte_lock_deinit(pte);
 	pte_free(pte);
 	pmd_free(pmd);
 free:
@@ -305,16 +292,6 @@ alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pg
 	set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot));
 }
 
-/*
- * Clear any PGD mapping.  On a two-level page table system,
- * the clearance is done by the middle-level functions (pmd)
- * rather than the top-level (pgd) functions.
- */
-static inline void clear_mapping(unsigned long virt)
-{
-	pmd_clear(pmd_off_k(virt));
-}
-
 struct mem_types {
 	unsigned int	prot_pte;
 	unsigned int	prot_l1;
@@ -373,7 +350,7 @@ static struct mem_types mem_types[] __initdata = {
 /*
  * Adjust the PMD section entries according to the CPU in use.
  */
-static void __init build_mem_type_table(void)
+void __init build_mem_type_table(void)
 {
 	struct cachepolicy *cp;
 	unsigned int cr = get_cr();
@@ -483,25 +460,25 @@ static void __init build_mem_type_table(void)
  * offsets, and we take full advantage of sections and
  * supersections.
  */
-static void __init create_mapping(struct map_desc *md)
+void __init create_mapping(struct map_desc *md)
 {
 	unsigned long virt, length;
 	int prot_sect, prot_l1, domain;
 	pgprot_t prot_pte;
-	long off;
+	unsigned long off = (u32)__pfn_to_phys(md->pfn);
 
 	if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
 		printk(KERN_WARNING "BUG: not creating mapping for "
-		       "0x%08lx at 0x%08lx in user region\n",
-		       md->physical, md->virtual);
+		       "0x%016llx at 0x%08lx in user region\n",
+		       __pfn_to_phys((u64)md->pfn), md->virtual);
 		return;
 	}
 
 	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
 	    md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
-		printk(KERN_WARNING "BUG: mapping for 0x%08lx at 0x%08lx "
+		printk(KERN_WARNING "BUG: mapping for 0x%016llx at 0x%08lx "
 		       "overlaps vmalloc space\n",
-		       md->physical, md->virtual);
+		       __pfn_to_phys((u64)md->pfn), md->virtual);
 	}
 
 	domain	  = mem_types[md->type].domain;
@@ -509,15 +486,40 @@ static void __init create_mapping(struct map_desc *md)
 	prot_l1   = mem_types[md->type].prot_l1 | PMD_DOMAIN(domain);
 	prot_sect = mem_types[md->type].prot_sect | PMD_DOMAIN(domain);
 
+	/*
+	 * Catch 36-bit addresses
+	 */
+	if(md->pfn >= 0x100000) {
+		if(domain) {
+			printk(KERN_ERR "MM: invalid domain in supersection "
+				"mapping for 0x%016llx at 0x%08lx\n",
+				__pfn_to_phys((u64)md->pfn), md->virtual);
+			return;
+		}
+		if((md->virtual | md->length | __pfn_to_phys(md->pfn))
+			& ~SUPERSECTION_MASK) {
+			printk(KERN_ERR "MM: cannot create mapping for "
+				"0x%016llx at 0x%08lx invalid alignment\n",
+				__pfn_to_phys((u64)md->pfn), md->virtual);
+			return;
+		}
+
+		/*
+		 * Shift bits [35:32] of address into bits [23:20] of PMD
+		 * (See ARMv6 spec).
+		 */
+		off |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20);
+	}
+
 	virt   = md->virtual;
-	off    = md->physical - virt;
+	off   -= virt;
 	length = md->length;
 
 	if (mem_types[md->type].prot_l1 == 0 &&
 	    (virt & 0xfffff || (virt + off) & 0xfffff || (virt + length) & 0xfffff)) {
 		printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not "
 		       "be mapped using pages, ignoring.\n",
-		       md->physical, md->virtual);
+		       __pfn_to_phys(md->pfn), md->virtual);
 		return;
 	}
 
@@ -535,13 +537,22 @@ static void __init create_mapping(struct map_desc *md)
 	 *	of the actual domain assignments in use.
 	 */
 	if (cpu_architecture() >= CPU_ARCH_ARMv6 && domain == 0) {
-		/* Align to supersection boundary */
-		while ((virt & ~SUPERSECTION_MASK || (virt + off) &
-			~SUPERSECTION_MASK) && length >= (PGDIR_SIZE / 2)) {
-			alloc_init_section(virt, virt + off, prot_sect);
-
-			virt   += (PGDIR_SIZE / 2);
-			length -= (PGDIR_SIZE / 2);
+		/*
+		 * Align to supersection boundary if !high pages.
+		 * High pages have already been checked for proper
+		 * alignment above and they will fail the SUPSERSECTION_MASK
+		 * check because of the way the address is encoded into
+		 * offset.
+		 */
+		if (md->pfn <= 0x100000) {
+			while ((virt & ~SUPERSECTION_MASK ||
+			        (virt + off) & ~SUPERSECTION_MASK) &&
+				length >= (PGDIR_SIZE / 2)) {
+				alloc_init_section(virt, virt + off, prot_sect);
+
+				virt   += (PGDIR_SIZE / 2);
+				length -= (PGDIR_SIZE / 2);
+			}
 		}
 
 		while (length >= SUPERSECTION_SIZE) {
@@ -601,100 +612,6 @@ void setup_mm_for_reboot(char mode)
 	}
 }
 
-extern void _stext, _etext;
-
-/*
- * Setup initial mappings.  We use the page we allocated for zero page to hold
- * the mappings, which will get overwritten by the vectors in traps_init().
- * The mappings must be in virtual address order.
- */
-void __init memtable_init(struct meminfo *mi)
-{
-	struct map_desc *init_maps, *p, *q;
-	unsigned long address = 0;
-	int i;
-
-	build_mem_type_table();
-
-	init_maps = p = alloc_bootmem_low_pages(PAGE_SIZE);
-
-#ifdef CONFIG_XIP_KERNEL
-	p->physical   = CONFIG_XIP_PHYS_ADDR & PMD_MASK;
-	p->virtual    = (unsigned long)&_stext & PMD_MASK;
-	p->length     = ((unsigned long)&_etext - p->virtual + ~PMD_MASK) & PMD_MASK;
-	p->type       = MT_ROM;
-	p ++;
-#endif
-
-	for (i = 0; i < mi->nr_banks; i++) {
-		if (mi->bank[i].size == 0)
-			continue;
-
-		p->physical   = mi->bank[i].start;
-		p->virtual    = __phys_to_virt(p->physical);
-		p->length     = mi->bank[i].size;
-		p->type       = MT_MEMORY;
-		p ++;
-	}
-
-#ifdef FLUSH_BASE
-	p->physical   = FLUSH_BASE_PHYS;
-	p->virtual    = FLUSH_BASE;
-	p->length     = PGDIR_SIZE;
-	p->type       = MT_CACHECLEAN;
-	p ++;
-#endif
-
-#ifdef FLUSH_BASE_MINICACHE
-	p->physical   = FLUSH_BASE_PHYS + PGDIR_SIZE;
-	p->virtual    = FLUSH_BASE_MINICACHE;
-	p->length     = PGDIR_SIZE;
-	p->type       = MT_MINICLEAN;
-	p ++;
-#endif
-
-	/*
-	 * Go through the initial mappings, but clear out any
-	 * pgdir entries that are not in the description.
-	 */
-	q = init_maps;
-	do {
-		if (address < q->virtual || q == p) {
-			clear_mapping(address);
-			address += PGDIR_SIZE;
-		} else {
-			create_mapping(q);
-
-			address = q->virtual + q->length;
-			address = (address + PGDIR_SIZE - 1) & PGDIR_MASK;
-
-			q ++;
-		}
-	} while (address != 0);
-
-	/*
-	 * Create a mapping for the machine vectors at the high-vectors
-	 * location (0xffff0000).  If we aren't using high-vectors, also
-	 * create a mapping at the low-vectors virtual address.
-	 */
-	init_maps->physical   = virt_to_phys(init_maps);
-	init_maps->virtual    = 0xffff0000;
-	init_maps->length     = PAGE_SIZE;
-	init_maps->type       = MT_HIGH_VECTORS;
-	create_mapping(init_maps);
-
-	if (!vectors_high()) {
-		init_maps->virtual = 0;
-		init_maps->type = MT_LOW_VECTORS;
-		create_mapping(init_maps);
-	}
-
-	flush_cache_all();
-	local_flush_tlb_all();
-
-	top_pmd = pmd_off_k(0xffff0000);
-}
-
 /*
  * Create the architecture specific mappings
  */
diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile
index 8ffb523e6c77..6a94e54848fd 100644
--- a/arch/arm/oprofile/Makefile
+++ b/arch/arm/oprofile/Makefile
@@ -6,6 +6,6 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
 		oprofilefs.o oprofile_stats.o \
 		timer_int.o )
 
-oprofile-y				:= $(DRIVER_OBJS) init.o backtrace.o
-oprofile-$(CONFIG_CPU_XSCALE)		+= common.o op_model_xscale.o
+oprofile-y				:= $(DRIVER_OBJS) common.o backtrace.o
+oprofile-$(CONFIG_CPU_XSCALE)		+= op_model_xscale.o
 
diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c
index df35c452a8bf..7c22c12618cc 100644
--- a/arch/arm/oprofile/backtrace.c
+++ b/arch/arm/oprofile/backtrace.c
@@ -49,42 +49,22 @@ static struct frame_tail* kernel_backtrace(struct frame_tail *tail)
 
 static struct frame_tail* user_backtrace(struct frame_tail *tail)
 {
-	struct frame_tail buftail;
+	struct frame_tail buftail[2];
 
-	/* hardware pte might not be valid due to dirty/accessed bit emulation
-	 * so we use copy_from_user and benefit from exception fixups */
-	if (copy_from_user(&buftail, tail, sizeof(struct frame_tail)))
+	/* Also check accessibility of one struct frame_tail beyond */
+	if (!access_ok(VERIFY_READ, tail, sizeof(buftail)))
+		return NULL;
+	if (__copy_from_user_inatomic(buftail, tail, sizeof(buftail)))
 		return NULL;
 
-	oprofile_add_trace(buftail.lr);
+	oprofile_add_trace(buftail[0].lr);
 
 	/* frame pointers should strictly progress back up the stack
 	 * (towards higher addresses) */
-	if (tail >= buftail.fp)
+	if (tail >= buftail[0].fp)
 		return NULL;
 
-	return buftail.fp-1;
-}
-
-/* Compare two addresses and see if they're on the same page */
-#define CMP_ADDR_EQUAL(x,y,offset) ((((unsigned long) x) >> PAGE_SHIFT) \
-	== ((((unsigned long) y) + offset) >> PAGE_SHIFT))
-
-/* check that the page(s) containing the frame tail are present */
-static int pages_present(struct frame_tail *tail)
-{
-	struct mm_struct * mm = current->mm;
-
-	if (!check_user_page_readable(mm, (unsigned long)tail))
-		return 0;
-
-	if (CMP_ADDR_EQUAL(tail, tail, 8))
-		return 1;
-
-	if (!check_user_page_readable(mm, ((unsigned long)tail) + 8))
-		return 0;
-
-	return 1;
+	return buftail[0].fp-1;
 }
 
 /*
@@ -118,7 +98,6 @@ static int valid_kernel_stack(struct frame_tail *tail, struct pt_regs *regs)
 void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
 {
 	struct frame_tail *tail;
-	unsigned long last_address = 0;
 
 	tail = ((struct frame_tail *) regs->ARM_fp) - 1;
 
@@ -132,13 +111,6 @@ void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
 		return;
 	}
 
-	while (depth-- && tail && !((unsigned long) tail & 3)) {
-		if ((!CMP_ADDR_EQUAL(last_address, tail, 0)
-			|| !CMP_ADDR_EQUAL(last_address, tail, 8))
-				&& !pages_present(tail))
-			return;
-		last_address = (unsigned long) tail;
+	while (depth-- && tail && !((unsigned long) tail & 3))
 		tail = user_backtrace(tail);
-	}
 }
-
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index e57dde882898..1415930ceee1 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -10,74 +10,23 @@
 #include <linux/init.h>
 #include <linux/oprofile.h>
 #include <linux/errno.h>
-#include <asm/semaphore.h>
 #include <linux/sysdev.h>
+#include <asm/semaphore.h>
 
 #include "op_counter.h"
 #include "op_arm_model.h"
 
-static struct op_arm_model_spec *pmu_model;
-static int pmu_enabled;
-static struct semaphore pmu_sem;
-
-static int pmu_start(void);
-static int pmu_setup(void);
-static void pmu_stop(void);
-static int pmu_create_files(struct super_block *, struct dentry *);
-
-#ifdef CONFIG_PM
-static int pmu_suspend(struct sys_device *dev, pm_message_t state)
-{
-	if (pmu_enabled)
-		pmu_stop();
-	return 0;
-}
-
-static int pmu_resume(struct sys_device *dev)
-{
-	if (pmu_enabled)
-		pmu_start();
-	return 0;
-}
-
-static struct sysdev_class oprofile_sysclass = {
-	set_kset_name("oprofile"),
-	.resume		= pmu_resume,
-	.suspend	= pmu_suspend,
-};
-
-static struct sys_device device_oprofile = {
-	.id		= 0,
-	.cls		= &oprofile_sysclass,
-};
-
-static int __init init_driverfs(void)
-{
-	int ret;
-
-	if (!(ret = sysdev_class_register(&oprofile_sysclass)))
-		ret = sysdev_register(&device_oprofile);
-
-	return ret;
-}
-
-static void  exit_driverfs(void)
-{
-	sysdev_unregister(&device_oprofile);
-	sysdev_class_unregister(&oprofile_sysclass);
-}
-#else
-#define init_driverfs()	do { } while (0)
-#define exit_driverfs() do { } while (0)
-#endif /* CONFIG_PM */
+static struct op_arm_model_spec *op_arm_model;
+static int op_arm_enabled;
+static struct semaphore op_arm_sem;
 
 struct op_counter_config counter_config[OP_MAX_COUNTER];
 
-static int pmu_create_files(struct super_block *sb, struct dentry *root)
+static int op_arm_create_files(struct super_block *sb, struct dentry *root)
 {
 	unsigned int i;
 
-	for (i = 0; i < pmu_model->num_counters; i++) {
+	for (i = 0; i < op_arm_model->num_counters; i++) {
 		struct dentry *dir;
 		char buf[2];
 
@@ -94,63 +43,123 @@ static int pmu_create_files(struct super_block *sb, struct dentry *root)
 	return 0;
 }
 
-static int pmu_setup(void)
+static int op_arm_setup(void)
 {
 	int ret;
 
 	spin_lock(&oprofilefs_lock);
-	ret = pmu_model->setup_ctrs();
+	ret = op_arm_model->setup_ctrs();
 	spin_unlock(&oprofilefs_lock);
 	return ret;
 }
 
-static int pmu_start(void)
+static int op_arm_start(void)
 {
 	int ret = -EBUSY;
 
-	down(&pmu_sem);
-	if (!pmu_enabled) {
-		ret = pmu_model->start();
-		pmu_enabled = !ret;
+	down(&op_arm_sem);
+	if (!op_arm_enabled) {
+		ret = op_arm_model->start();
+		op_arm_enabled = !ret;
 	}
-	up(&pmu_sem);
+	up(&op_arm_sem);
 	return ret;
 }
 
-static void pmu_stop(void)
+static void op_arm_stop(void)
+{
+	down(&op_arm_sem);
+	if (op_arm_enabled)
+		op_arm_model->stop();
+	op_arm_enabled = 0;
+	up(&op_arm_sem);
+}
+
+#ifdef CONFIG_PM
+static int op_arm_suspend(struct sys_device *dev, pm_message_t state)
 {
-	down(&pmu_sem);
-	if (pmu_enabled)
-		pmu_model->stop();
-	pmu_enabled = 0;
-	up(&pmu_sem);
+	down(&op_arm_sem);
+	if (op_arm_enabled)
+		op_arm_model->stop();
+	up(&op_arm_sem);
+	return 0;
 }
 
-int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec)
+static int op_arm_resume(struct sys_device *dev)
 {
-	init_MUTEX(&pmu_sem);
+	down(&op_arm_sem);
+	if (op_arm_enabled && op_arm_model->start())
+		op_arm_enabled = 0;
+	up(&op_arm_sem);
+	return 0;
+}
+
+static struct sysdev_class oprofile_sysclass = {
+	set_kset_name("oprofile"),
+	.resume		= op_arm_resume,
+	.suspend	= op_arm_suspend,
+};
 
-	if (spec->init() < 0)
-		return -ENODEV;
+static struct sys_device device_oprofile = {
+	.id		= 0,
+	.cls		= &oprofile_sysclass,
+};
 
-	pmu_model = spec;
-	init_driverfs();
-	ops->create_files = pmu_create_files;
-	ops->setup = pmu_setup;
-	ops->shutdown = pmu_stop;
-	ops->start = pmu_start;
-	ops->stop = pmu_stop;
-	ops->cpu_type = pmu_model->name;
-	printk(KERN_INFO "oprofile: using %s PMU\n", spec->name);
+static int __init init_driverfs(void)
+{
+	int ret;
 
-	return 0;
+	if (!(ret = sysdev_class_register(&oprofile_sysclass)))
+		ret = sysdev_register(&device_oprofile);
+
+	return ret;
+}
+
+static void  exit_driverfs(void)
+{
+	sysdev_unregister(&device_oprofile);
+	sysdev_class_unregister(&oprofile_sysclass);
+}
+#else
+#define init_driverfs()	do { } while (0)
+#define exit_driverfs() do { } while (0)
+#endif /* CONFIG_PM */
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+	struct op_arm_model_spec *spec = NULL;
+	int ret = -ENODEV;
+
+#ifdef CONFIG_CPU_XSCALE
+	spec = &op_xscale_spec;
+#endif
+
+	if (spec) {
+		init_MUTEX(&op_arm_sem);
+
+		if (spec->init() < 0)
+			return -ENODEV;
+
+		op_arm_model = spec;
+		init_driverfs();
+		ops->create_files = op_arm_create_files;
+		ops->setup = op_arm_setup;
+		ops->shutdown = op_arm_stop;
+		ops->start = op_arm_start;
+		ops->stop = op_arm_stop;
+		ops->cpu_type = op_arm_model->name;
+		ops->backtrace = arm_backtrace;
+		printk(KERN_INFO "oprofile: using %s\n", spec->name);
+	}
+
+	return ret;
 }
 
-void pmu_exit(void)
+void oprofile_arch_exit(void)
 {
-	if (pmu_model) {
+	if (op_arm_model) {
 		exit_driverfs();
-		pmu_model = NULL;
+		op_arm_model = NULL;
 	}
 }
 
diff --git a/arch/arm/oprofile/init.c b/arch/arm/oprofile/init.c
deleted file mode 100644
index d315a3a86c86..000000000000
--- a/arch/arm/oprofile/init.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/**
- * @file init.c
- *
- * @remark Copyright 2004 Oprofile Authors
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include "op_arm_model.h"
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	int ret = -ENODEV;
-
-#ifdef CONFIG_CPU_XSCALE
-	ret = pmu_init(ops, &op_xscale_spec);
-#endif
-
-	ops->backtrace = arm_backtrace;
-
-	return ret;
-}
-
-void oprofile_arch_exit(void)
-{
-#ifdef CONFIG_CPU_XSCALE
-	pmu_exit();
-#endif
-}
diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h
index 2148d07484b7..38c6ad158547 100644
--- a/arch/arm/oprofile/op_arm_model.h
+++ b/arch/arm/oprofile/op_arm_model.h
@@ -26,6 +26,6 @@ extern struct op_arm_model_spec op_xscale_spec;
 
 extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
 
-extern int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
-extern void pmu_exit(void);
+extern int __init op_arm_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
+extern void op_arm_exit(void);
 #endif /* OP_ARM_MODEL_H */
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 52a58b2da288..a020fe16428f 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -13,6 +13,7 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/string.h>
 
 #include <asm/io.h>
 #include <asm/semaphore.h>
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 7719a4062e3a..7ad69f14a3e7 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -59,7 +59,11 @@ void __init omap_detect_sram(void)
 }
 
 static struct map_desc omap_sram_io_desc[] __initdata = {
-	{ OMAP1_SRAM_BASE, OMAP1_SRAM_START, 0, MT_DEVICE }
+	{	/* .length gets filled in at runtime */
+		.virtual	= OMAP1_SRAM_BASE,
+		.pfn		= __phys_to_pfn(OMAP1_SRAM_START),
+		.type		= MT_DEVICE
+	}
 };
 
 /*
diff --git a/arch/arm26/kernel/ptrace.c b/arch/arm26/kernel/ptrace.c
index 8a52124de0e1..cf7e977d18c8 100644
--- a/arch/arm26/kernel/ptrace.c
+++ b/arch/arm26/kernel/ptrace.c
@@ -665,7 +665,7 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat
 	return ret;
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
 {
 	struct task_struct *child;
 	int ret;
diff --git a/arch/arm26/kernel/time.c b/arch/arm26/kernel/time.c
index e66aedd02fad..335525339ad6 100644
--- a/arch/arm26/kernel/time.c
+++ b/arch/arm26/kernel/time.c
@@ -34,10 +34,6 @@
 #include <asm/irq.h>
 #include <asm/ioc.h>
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 extern unsigned long wall_jiffies;
 
 /* this needs a better home */
diff --git a/arch/arm26/mm/memc.c b/arch/arm26/mm/memc.c
index 8e8a2bb2487d..34def6397c3c 100644
--- a/arch/arm26/mm/memc.c
+++ b/arch/arm26/mm/memc.c
@@ -79,12 +79,6 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 		goto no_pgd;
 
 	/*
-	 * This lock is here just to satisfy pmd_alloc and pte_lock
-         * FIXME: I bet we could avoid taking it pretty much altogether
-	 */
-	spin_lock(&mm->page_table_lock);
-
-	/*
 	 * On ARM, first page must always be allocated since it contains
 	 * the machine vectors.
 	 */
@@ -92,7 +86,7 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 	if (!new_pmd)
 		goto no_pmd;
 
-	new_pte = pte_alloc_kernel(mm, new_pmd, 0);
+	new_pte = pte_alloc_map(mm, new_pmd, 0);
 	if (!new_pte)
 		goto no_pte;
 
@@ -101,6 +95,7 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 	init_pte = pte_offset(init_pmd, 0);
 
 	set_pte(new_pte, *init_pte);
+	pte_unmap(new_pte);
 
 	/*
 	 * the page table entries are zeroed
@@ -112,23 +107,14 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 	memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR,
 		(PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t));
 
-	spin_unlock(&mm->page_table_lock);
-
 	/* update MEMC tables */
 	cpu_memc_update_all(new_pgd);
 	return new_pgd;
 
 no_pte:
-	spin_unlock(&mm->page_table_lock);
 	pmd_free(new_pmd);
-	free_pgd_slow(new_pgd);
-	return NULL;
-
 no_pmd:
-	spin_unlock(&mm->page_table_lock);
 	free_pgd_slow(new_pgd);
-	return NULL;
-
 no_pgd:
 	return NULL;
 }
diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c
index 11ab3836aac6..56b038c8d482 100644
--- a/arch/cris/arch-v10/drivers/axisflashmap.c
+++ b/arch/cris/arch-v10/drivers/axisflashmap.c
@@ -140,6 +140,7 @@
 #include <linux/kernel.h>
 #include <linux/config.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 
 #include <linux/mtd/concat.h>
 #include <linux/mtd/map.h>
diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c
index 78ed52b1cdac..b679f983b90a 100644
--- a/arch/cris/arch-v32/drivers/axisflashmap.c
+++ b/arch/cris/arch-v32/drivers/axisflashmap.c
@@ -20,6 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/config.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 
 #include <linux/mtd/concat.h>
 #include <linux/mtd/map.h>
diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c
index 8233406798d3..b08a28bb58ab 100644
--- a/arch/cris/arch-v32/mm/tlb.c
+++ b/arch/cris/arch-v32/mm/tlb.c
@@ -175,6 +175,8 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 	return 0;
 }
 
+static DEFINE_SPINLOCK(mmu_context_lock);
+
 /* Called in schedule() just before actually doing the switch_to. */
 void
 switch_mm(struct mm_struct *prev, struct mm_struct *next,
@@ -183,10 +185,10 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	int cpu = smp_processor_id();
 
 	/* Make sure there is a MMU context. */
-	spin_lock(&next->page_table_lock);
+	spin_lock(&mmu_context_lock);
 	get_mmu_context(next);
 	cpu_set(cpu, next->cpu_vm_mask);
-	spin_unlock(&next->page_table_lock);
+	spin_unlock(&mmu_context_lock);
 
 	/*
 	 * Remember the pgd for the fault handlers. Keep a seperate copy of it
diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c
index a2d99b4aedcd..66ba8898db07 100644
--- a/arch/cris/kernel/time.c
+++ b/arch/cris/kernel/time.c
@@ -31,10 +31,7 @@
 #include <linux/timex.h>
 #include <linux/init.h>
 #include <linux/profile.h>
-
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
+#include <linux/sched.h>	/* just for sched_clock() - funny that */
 
 int have_rtc;  /* used to remember if we have an RTC or not */;
 
diff --git a/arch/cris/mm/ioremap.c b/arch/cris/mm/ioremap.c
index ebba11e270fa..a92ac9877582 100644
--- a/arch/cris/mm/ioremap.c
+++ b/arch/cris/mm/ioremap.c
@@ -52,7 +52,7 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned lo
 	if (address >= end)
 		BUG();
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, address + phys_addr, prot);
@@ -74,7 +74,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 	flush_cache_all();
 	if (address >= end)
 		BUG();
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		pud_t *pud;
 		pmd_t *pmd;
@@ -94,7 +93,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	} while (address && (address < end));
-	spin_unlock(&init_mm.page_table_lock);
 	flush_tlb_all();
 	return error;
 }
diff --git a/arch/frv/kernel/ptrace.c b/arch/frv/kernel/ptrace.c
index cbe03cba9f02..cb335a14a315 100644
--- a/arch/frv/kernel/ptrace.c
+++ b/arch/frv/kernel/ptrace.c
@@ -106,7 +106,7 @@ void ptrace_enable(struct task_struct *child)
 	child->thread.frame0->__status |= REG__STATUS_STEP;
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
 {
 	struct task_struct *child;
 	unsigned long tmp;
diff --git a/arch/frv/kernel/time.c b/arch/frv/kernel/time.c
index 8d6558b00e44..2e9741227b73 100644
--- a/arch/frv/kernel/time.c
+++ b/arch/frv/kernel/time.c
@@ -34,9 +34,6 @@
 
 extern unsigned long wall_jiffies;
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-EXPORT_SYMBOL(jiffies_64);
-
 unsigned long __nongprelbss __clkin_clock_speed_HZ;
 unsigned long __nongprelbss __ext_bus_clock_speed_HZ;
 unsigned long __nongprelbss __res_bus_clock_speed_HZ;
@@ -221,6 +218,7 @@ int do_settimeofday(struct timespec *tv)
 	clock_was_set();
 	return 0;
 }
+EXPORT_SYMBOL(do_settimeofday);
 
 /*
  * Scheduler clock - returns current time in nanosec units.
diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c
index 819895cf0b9e..2082a9647f4f 100644
--- a/arch/frv/mb93090-mb00/pci-dma-nommu.c
+++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c
@@ -33,7 +33,7 @@ struct dma_alloc_record {
 static DEFINE_SPINLOCK(dma_alloc_lock);
 static LIST_HEAD(dma_alloc_list);
 
-void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, int gfp)
+void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp)
 {
 	struct dma_alloc_record *new;
 	struct list_head *this = &dma_alloc_list;
diff --git a/arch/frv/mb93090-mb00/pci-dma.c b/arch/frv/mb93090-mb00/pci-dma.c
index 27eb12066507..86fbdadc51b6 100644
--- a/arch/frv/mb93090-mb00/pci-dma.c
+++ b/arch/frv/mb93090-mb00/pci-dma.c
@@ -17,7 +17,7 @@
 #include <linux/highmem.h>
 #include <asm/io.h>
 
-void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, int gfp)
+void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
 
diff --git a/arch/frv/mm/dma-alloc.c b/arch/frv/mm/dma-alloc.c
index 4b38d45435f6..342823aad758 100644
--- a/arch/frv/mm/dma-alloc.c
+++ b/arch/frv/mm/dma-alloc.c
@@ -55,21 +55,18 @@ static int map_page(unsigned long va, unsigned long pa, pgprot_t prot)
 	pte_t *pte;
 	int err = -ENOMEM;
 
-	spin_lock(&init_mm.page_table_lock);
-
 	/* Use upper 10 bits of VA to index the first level map */
 	pge = pgd_offset_k(va);
 	pue = pud_offset(pge, va);
 	pme = pmd_offset(pue, va);
 
 	/* Use middle 10 bits of VA to index the second-level map */
-	pte = pte_alloc_kernel(&init_mm, pme, va);
+	pte = pte_alloc_kernel(pme, va);
 	if (pte != 0) {
 		err = 0;
 		set_pte(pte, mk_pte_phys(pa & PAGE_MASK, prot));
 	}
 
-	spin_unlock(&init_mm.page_table_lock);
 	return err;
 }
 
@@ -81,7 +78,7 @@ static int map_page(unsigned long va, unsigned long pa, pgprot_t prot)
  * portions of the kernel with single large page TLB entries, and
  * still get unique uncached pages for consistent DMA.
  */
-void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
+void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle)
 {
 	struct vm_struct *area;
 	unsigned long page, va, pa;
diff --git a/arch/frv/mm/pgalloc.c b/arch/frv/mm/pgalloc.c
index 4eaec0f3525b..2c67dfe5a6b3 100644
--- a/arch/frv/mm/pgalloc.c
+++ b/arch/frv/mm/pgalloc.c
@@ -87,14 +87,14 @@ static inline void pgd_list_add(pgd_t *pgd)
 	if (pgd_list)
 		pgd_list->private = (unsigned long) &page->index;
 	pgd_list = page;
-	page->private = (unsigned long) &pgd_list;
+	set_page_private(page, (unsigned long)&pgd_list);
 }
 
 static inline void pgd_list_del(pgd_t *pgd)
 {
 	struct page *next, **pprev, *page = virt_to_page(pgd);
 	next = (struct page *) page->index;
-	pprev = (struct page **) page->private;
+	pprev = (struct page **)page_private(page);
 	*pprev = next;
 	if (next)
 		next->private = (unsigned long) pprev;
diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c
index 05c15e869777..a569fe4aa284 100644
--- a/arch/h8300/kernel/ptrace.c
+++ b/arch/h8300/kernel/ptrace.c
@@ -57,7 +57,7 @@ void ptrace_disable(struct task_struct *child)
 	h8300_disable_trace(child);
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
 {
 	struct task_struct *child;
 	int ret;
diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c
index af8c5d2057dd..688a5100604c 100644
--- a/arch/h8300/kernel/time.c
+++ b/arch/h8300/kernel/time.c
@@ -32,10 +32,6 @@
 
 #define	TICK_SIZE (tick_nsec / 1000)
 
-u64 jiffies_64;
-
-EXPORT_SYMBOL(jiffies_64);
-
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index d2703cda61ea..5383e5e2d9b7 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -5,7 +5,7 @@
 
 mainmenu "Linux Kernel Configuration"
 
-config X86
+config X86_32
 	bool
 	default y
 	help
@@ -18,6 +18,10 @@ config SEMAPHORE_SLEEPERS
 	bool
 	default y
 
+config X86
+	bool
+	default y
+
 config MMU
 	bool
 	default y
@@ -151,304 +155,7 @@ config ES7000_CLUSTERED_APIC
 	default y
 	depends on SMP && X86_ES7000 && MPENTIUMIII
 
-if !X86_ELAN
-
-choice
-	prompt "Processor family"
-	default M686
-
-config M386
-	bool "386"
-	---help---
-	  This is the processor type of your CPU. This information is used for
-	  optimizing purposes. In order to compile a kernel that can run on
-	  all x86 CPU types (albeit not optimally fast), you can specify
-	  "386" here.
-
-	  The kernel will not necessarily run on earlier architectures than
-	  the one you have chosen, e.g. a Pentium optimized kernel will run on
-	  a PPro, but not necessarily on a i486.
-
-	  Here are the settings recommended for greatest speed:
-	  - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
-	  486DLC/DLC2, UMC 486SX-S and NexGen Nx586.  Only "386" kernels
-	  will run on a 386 class machine.
-	  - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
-	  SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
-	  - "586" for generic Pentium CPUs lacking the TSC
-	  (time stamp counter) register.
-	  - "Pentium-Classic" for the Intel Pentium.
-	  - "Pentium-MMX" for the Intel Pentium MMX.
-	  - "Pentium-Pro" for the Intel Pentium Pro.
-	  - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron.
-	  - "Pentium-III" for the Intel Pentium III or Coppermine Celeron.
-	  - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron.
-	  - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
-	  - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
-	  - "Crusoe" for the Transmeta Crusoe series.
-	  - "Efficeon" for the Transmeta Efficeon series.
-	  - "Winchip-C6" for original IDT Winchip.
-	  - "Winchip-2" for IDT Winchip 2.
-	  - "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
-	  - "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
-	  - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
-	  - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above).
-
-	  If you don't know what to do, choose "386".
-
-config M486
-	bool "486"
-	help
-	  Select this for a 486 series processor, either Intel or one of the
-	  compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
-	  DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
-	  U5S.
-
-config M586
-	bool "586/K5/5x86/6x86/6x86MX"
-	help
-	  Select this for an 586 or 686 series processor such as the AMD K5,
-	  the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
-	  assume the RDTSC (Read Time Stamp Counter) instruction.
-
-config M586TSC
-	bool "Pentium-Classic"
-	help
-	  Select this for a Pentium Classic processor with the RDTSC (Read
-	  Time Stamp Counter) instruction for benchmarking.
-
-config M586MMX
-	bool "Pentium-MMX"
-	help
-	  Select this for a Pentium with the MMX graphics/multimedia
-	  extended instructions.
-
-config M686
-	bool "Pentium-Pro"
-	help
-	  Select this for Intel Pentium Pro chips.  This enables the use of
-	  Pentium Pro extended instructions, and disables the init-time guard
-	  against the f00f bug found in earlier Pentiums.
-
-config MPENTIUMII
-	bool "Pentium-II/Celeron(pre-Coppermine)"
-	help
-	  Select this for Intel chips based on the Pentium-II and
-	  pre-Coppermine Celeron core.  This option enables an unaligned
-	  copy optimization, compiles the kernel with optimization flags
-	  tailored for the chip, and applies any applicable Pentium Pro
-	  optimizations.
-
-config MPENTIUMIII
-	bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
-	help
-	  Select this for Intel chips based on the Pentium-III and
-	  Celeron-Coppermine core.  This option enables use of some
-	  extended prefetch instructions in addition to the Pentium II
-	  extensions.
-
-config MPENTIUMM
-	bool "Pentium M"
-	help
-	  Select this for Intel Pentium M (not Pentium-4 M)
-	  notebook chips.
-
-config MPENTIUM4
-	bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon"
-	help
-	  Select this for Intel Pentium 4 chips.  This includes the
-	  Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M
-	  (not Pentium M) chips.  This option enables compile flags
-	  optimized for the chip, uses the correct cache shift, and
-	  applies any applicable Pentium III optimizations.
-
-config MK6
-	bool "K6/K6-II/K6-III"
-	help
-	  Select this for an AMD K6-family processor.  Enables use of
-	  some extended instructions, and passes appropriate optimization
-	  flags to GCC.
-
-config MK7
-	bool "Athlon/Duron/K7"
-	help
-	  Select this for an AMD Athlon K7-family processor.  Enables use of
-	  some extended instructions, and passes appropriate optimization
-	  flags to GCC.
-
-config MK8
-	bool "Opteron/Athlon64/Hammer/K8"
-	help
-	  Select this for an AMD Opteron or Athlon64 Hammer-family processor.  Enables
-	  use of some extended instructions, and passes appropriate optimization
-	  flags to GCC.
-
-config MCRUSOE
-	bool "Crusoe"
-	help
-	  Select this for a Transmeta Crusoe processor.  Treats the processor
-	  like a 586 with TSC, and sets some GCC optimization flags (like a
-	  Pentium Pro with no alignment requirements).
-
-config MEFFICEON
-	bool "Efficeon"
-	help
-	  Select this for a Transmeta Efficeon processor.
-
-config MWINCHIPC6
-	bool "Winchip-C6"
-	help
-	  Select this for an IDT Winchip C6 chip.  Linux and GCC
-	  treat this chip as a 586TSC with some extended instructions
-	  and alignment requirements.
-
-config MWINCHIP2
-	bool "Winchip-2"
-	help
-	  Select this for an IDT Winchip-2.  Linux and GCC
-	  treat this chip as a 586TSC with some extended instructions
-	  and alignment requirements.
-
-config MWINCHIP3D
-	bool "Winchip-2A/Winchip-3"
-	help
-	  Select this for an IDT Winchip-2A or 3.  Linux and GCC
-	  treat this chip as a 586TSC with some extended instructions
-	  and alignment reqirements.  Also enable out of order memory
-	  stores for this CPU, which can increase performance of some
-	  operations.
-
-config MGEODEGX1
-	bool "GeodeGX1"
-	help
-	  Select this for a Geode GX1 (Cyrix MediaGX) chip.
-
-config MCYRIXIII
-	bool "CyrixIII/VIA-C3"
-	help
-	  Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
-	  treat this chip as a generic 586. Whilst the CPU is 686 class,
-	  it lacks the cmov extension which gcc assumes is present when
-	  generating 686 code.
-	  Note that Nehemiah (Model 9) and above will not boot with this
-	  kernel due to them lacking the 3DNow! instructions used in earlier
-	  incarnations of the CPU.
-
-config MVIAC3_2
-	bool "VIA C3-2 (Nehemiah)"
-	help
-	  Select this for a VIA C3 "Nehemiah". Selecting this enables usage
-	  of SSE and tells gcc to treat the CPU as a 686.
-	  Note, this kernel will not boot on older (pre model 9) C3s.
-
-endchoice
-
-config X86_GENERIC
-       bool "Generic x86 support"
-       help
-	  Instead of just including optimizations for the selected
-	  x86 variant (e.g. PII, Crusoe or Athlon), include some more
-	  generic optimizations as well. This will make the kernel
-	  perform better on x86 CPUs other than that selected.
-
-	  This is really intended for distributors who need more
-	  generic optimizations.
-
-endif
-
-#
-# Define implied options from the CPU selection here
-#
-config X86_CMPXCHG
-	bool
-	depends on !M386
-	default y
-
-config X86_XADD
-	bool
-	depends on !M386
-	default y
-
-config X86_L1_CACHE_SHIFT
-	int
-	default "7" if MPENTIUM4 || X86_GENERIC
-	default "4" if X86_ELAN || M486 || M386
-	default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODEGX1
-	default "6" if MK7 || MK8 || MPENTIUMM
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	depends on M386
-	default y
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	depends on !M386
-	default y
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config X86_PPRO_FENCE
-	bool
-	depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
-	default y
-
-config X86_F00F_BUG
-	bool
-	depends on M586MMX || M586TSC || M586 || M486 || M386
-	default y
-
-config X86_WP_WORKS_OK
-	bool
-	depends on !M386
-	default y
-
-config X86_INVLPG
-	bool
-	depends on !M386
-	default y
-
-config X86_BSWAP
-	bool
-	depends on !M386
-	default y
-
-config X86_POPAD_OK
-	bool
-	depends on !M386
-	default y
-
-config X86_ALIGNMENT_16
-	bool
-	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
-	default y
-
-config X86_GOOD_APIC
-	bool
-	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON
-	default y
-
-config X86_INTEL_USERCOPY
-	bool
-	depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON
-	default y
-
-config X86_USE_PPRO_CHECKSUM
-	bool
-	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON
-	default y
-
-config X86_USE_3DNOW
-	bool
-	depends on MCYRIXIII || MK7
-	default y
-
-config X86_OOSTORE
-	bool
-	depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
-	default y
+source "arch/i386/Kconfig.cpu"
 
 config HPET_TIMER
 	bool "HPET Timer Support"
@@ -561,11 +268,6 @@ config X86_VISWS_APIC
 	depends on X86_VISWS
 	default y
 
-config X86_TSC
-	bool
-	depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ
-	default y
-
 config X86_MCE
 	bool "Machine Check Exception"
 	depends on !X86_VOYAGER
diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu
new file mode 100644
index 000000000000..53bbb3c008ee
--- /dev/null
+++ b/arch/i386/Kconfig.cpu
@@ -0,0 +1,309 @@
+# Put here option for CPU selection and depending optimization
+if !X86_ELAN
+
+choice
+	prompt "Processor family"
+	default M686
+
+config M386
+	bool "386"
+	---help---
+	  This is the processor type of your CPU. This information is used for
+	  optimizing purposes. In order to compile a kernel that can run on
+	  all x86 CPU types (albeit not optimally fast), you can specify
+	  "386" here.
+
+	  The kernel will not necessarily run on earlier architectures than
+	  the one you have chosen, e.g. a Pentium optimized kernel will run on
+	  a PPro, but not necessarily on a i486.
+
+	  Here are the settings recommended for greatest speed:
+	  - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
+	  486DLC/DLC2, UMC 486SX-S and NexGen Nx586.  Only "386" kernels
+	  will run on a 386 class machine.
+	  - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
+	  SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
+	  - "586" for generic Pentium CPUs lacking the TSC
+	  (time stamp counter) register.
+	  - "Pentium-Classic" for the Intel Pentium.
+	  - "Pentium-MMX" for the Intel Pentium MMX.
+	  - "Pentium-Pro" for the Intel Pentium Pro.
+	  - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron.
+	  - "Pentium-III" for the Intel Pentium III or Coppermine Celeron.
+	  - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron.
+	  - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
+	  - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
+	  - "Crusoe" for the Transmeta Crusoe series.
+	  - "Efficeon" for the Transmeta Efficeon series.
+	  - "Winchip-C6" for original IDT Winchip.
+	  - "Winchip-2" for IDT Winchip 2.
+	  - "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
+	  - "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
+	  - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
+	  - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above).
+
+	  If you don't know what to do, choose "386".
+
+config M486
+	bool "486"
+	help
+	  Select this for a 486 series processor, either Intel or one of the
+	  compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
+	  DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
+	  U5S.
+
+config M586
+	bool "586/K5/5x86/6x86/6x86MX"
+	help
+	  Select this for an 586 or 686 series processor such as the AMD K5,
+	  the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
+	  assume the RDTSC (Read Time Stamp Counter) instruction.
+
+config M586TSC
+	bool "Pentium-Classic"
+	help
+	  Select this for a Pentium Classic processor with the RDTSC (Read
+	  Time Stamp Counter) instruction for benchmarking.
+
+config M586MMX
+	bool "Pentium-MMX"
+	help
+	  Select this for a Pentium with the MMX graphics/multimedia
+	  extended instructions.
+
+config M686
+	bool "Pentium-Pro"
+	help
+	  Select this for Intel Pentium Pro chips.  This enables the use of
+	  Pentium Pro extended instructions, and disables the init-time guard
+	  against the f00f bug found in earlier Pentiums.
+
+config MPENTIUMII
+	bool "Pentium-II/Celeron(pre-Coppermine)"
+	help
+	  Select this for Intel chips based on the Pentium-II and
+	  pre-Coppermine Celeron core.  This option enables an unaligned
+	  copy optimization, compiles the kernel with optimization flags
+	  tailored for the chip, and applies any applicable Pentium Pro
+	  optimizations.
+
+config MPENTIUMIII
+	bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
+	help
+	  Select this for Intel chips based on the Pentium-III and
+	  Celeron-Coppermine core.  This option enables use of some
+	  extended prefetch instructions in addition to the Pentium II
+	  extensions.
+
+config MPENTIUMM
+	bool "Pentium M"
+	help
+	  Select this for Intel Pentium M (not Pentium-4 M)
+	  notebook chips.
+
+config MPENTIUM4
+	bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon"
+	help
+	  Select this for Intel Pentium 4 chips.  This includes the
+	  Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M
+	  (not Pentium M) chips.  This option enables compile flags
+	  optimized for the chip, uses the correct cache shift, and
+	  applies any applicable Pentium III optimizations.
+
+config MK6
+	bool "K6/K6-II/K6-III"
+	help
+	  Select this for an AMD K6-family processor.  Enables use of
+	  some extended instructions, and passes appropriate optimization
+	  flags to GCC.
+
+config MK7
+	bool "Athlon/Duron/K7"
+	help
+	  Select this for an AMD Athlon K7-family processor.  Enables use of
+	  some extended instructions, and passes appropriate optimization
+	  flags to GCC.
+
+config MK8
+	bool "Opteron/Athlon64/Hammer/K8"
+	help
+	  Select this for an AMD Opteron or Athlon64 Hammer-family processor.  Enables
+	  use of some extended instructions, and passes appropriate optimization
+	  flags to GCC.
+
+config MCRUSOE
+	bool "Crusoe"
+	help
+	  Select this for a Transmeta Crusoe processor.  Treats the processor
+	  like a 586 with TSC, and sets some GCC optimization flags (like a
+	  Pentium Pro with no alignment requirements).
+
+config MEFFICEON
+	bool "Efficeon"
+	help
+	  Select this for a Transmeta Efficeon processor.
+
+config MWINCHIPC6
+	bool "Winchip-C6"
+	help
+	  Select this for an IDT Winchip C6 chip.  Linux and GCC
+	  treat this chip as a 586TSC with some extended instructions
+	  and alignment requirements.
+
+config MWINCHIP2
+	bool "Winchip-2"
+	help
+	  Select this for an IDT Winchip-2.  Linux and GCC
+	  treat this chip as a 586TSC with some extended instructions
+	  and alignment requirements.
+
+config MWINCHIP3D
+	bool "Winchip-2A/Winchip-3"
+	help
+	  Select this for an IDT Winchip-2A or 3.  Linux and GCC
+	  treat this chip as a 586TSC with some extended instructions
+	  and alignment reqirements.  Also enable out of order memory
+	  stores for this CPU, which can increase performance of some
+	  operations.
+
+config MGEODEGX1
+	bool "GeodeGX1"
+	help
+	  Select this for a Geode GX1 (Cyrix MediaGX) chip.
+
+config MCYRIXIII
+	bool "CyrixIII/VIA-C3"
+	help
+	  Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
+	  treat this chip as a generic 586. Whilst the CPU is 686 class,
+	  it lacks the cmov extension which gcc assumes is present when
+	  generating 686 code.
+	  Note that Nehemiah (Model 9) and above will not boot with this
+	  kernel due to them lacking the 3DNow! instructions used in earlier
+	  incarnations of the CPU.
+
+config MVIAC3_2
+	bool "VIA C3-2 (Nehemiah)"
+	help
+	  Select this for a VIA C3 "Nehemiah". Selecting this enables usage
+	  of SSE and tells gcc to treat the CPU as a 686.
+	  Note, this kernel will not boot on older (pre model 9) C3s.
+
+endchoice
+
+config X86_GENERIC
+       bool "Generic x86 support"
+       help
+	  Instead of just including optimizations for the selected
+	  x86 variant (e.g. PII, Crusoe or Athlon), include some more
+	  generic optimizations as well. This will make the kernel
+	  perform better on x86 CPUs other than that selected.
+
+	  This is really intended for distributors who need more
+	  generic optimizations.
+
+endif
+
+#
+# Define implied options from the CPU selection here
+#
+config X86_CMPXCHG
+	bool
+	depends on !M386
+	default y
+
+config X86_XADD
+	bool
+	depends on !M386
+	default y
+
+config X86_L1_CACHE_SHIFT
+	int
+	default "7" if MPENTIUM4 || X86_GENERIC
+	default "4" if X86_ELAN || M486 || M386
+	default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODEGX1
+	default "6" if MK7 || MK8 || MPENTIUMM
+
+config RWSEM_GENERIC_SPINLOCK
+	bool
+	depends on M386
+	default y
+
+config RWSEM_XCHGADD_ALGORITHM
+	bool
+	depends on !M386
+	default y
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default y
+
+config X86_PPRO_FENCE
+	bool
+	depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
+	default y
+
+config X86_F00F_BUG
+	bool
+	depends on M586MMX || M586TSC || M586 || M486 || M386
+	default y
+
+config X86_WP_WORKS_OK
+	bool
+	depends on !M386
+	default y
+
+config X86_INVLPG
+	bool
+	depends on !M386
+	default y
+
+config X86_BSWAP
+	bool
+	depends on !M386
+	default y
+
+config X86_POPAD_OK
+	bool
+	depends on !M386
+	default y
+
+config X86_CMPXCHG64
+	bool
+	depends on !M386 && !M486
+	default y
+
+config X86_ALIGNMENT_16
+	bool
+	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
+	default y
+
+config X86_GOOD_APIC
+	bool
+	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON
+	default y
+
+config X86_INTEL_USERCOPY
+	bool
+	depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON
+	default y
+
+config X86_USE_PPRO_CHECKSUM
+	bool
+	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON
+	default y
+
+config X86_USE_3DNOW
+	bool
+	depends on MCYRIXIII || MK7
+	default y
+
+config X86_OOSTORE
+	bool
+	depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
+	default y
+
+config X86_TSC
+	bool
+	depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ
+	default y
diff --git a/arch/i386/Makefile b/arch/i386/Makefile
index 09951990a622..d121ea18460f 100644
--- a/arch/i386/Makefile
+++ b/arch/i386/Makefile
@@ -34,35 +34,8 @@ CFLAGS += -pipe -msoft-float
 # prevent gcc from keeping the stack 16 byte aligned
 CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
 
-align := $(cc-option-align)
-cflags-$(CONFIG_M386)		+= -march=i386
-cflags-$(CONFIG_M486)		+= -march=i486
-cflags-$(CONFIG_M586)		+= -march=i586
-cflags-$(CONFIG_M586TSC)	+= -march=i586
-cflags-$(CONFIG_M586MMX)	+= $(call cc-option,-march=pentium-mmx,-march=i586)
-cflags-$(CONFIG_M686)		+= -march=i686
-cflags-$(CONFIG_MPENTIUMII)	+= -march=i686 $(call cc-option,-mtune=pentium2)
-cflags-$(CONFIG_MPENTIUMIII)	+= -march=i686 $(call cc-option,-mtune=pentium3)
-cflags-$(CONFIG_MPENTIUMM)	+= -march=i686 $(call cc-option,-mtune=pentium3)
-cflags-$(CONFIG_MPENTIUM4)	+= -march=i686 $(call cc-option,-mtune=pentium4)
-cflags-$(CONFIG_MK6)		+= -march=k6
-# Please note, that patches that add -march=athlon-xp and friends are pointless.
-# They make zero difference whatsosever to performance at this time.
-cflags-$(CONFIG_MK7)		+= $(call cc-option,-march=athlon,-march=i686 $(align)-functions=4)
-cflags-$(CONFIG_MK8)		+= $(call cc-option,-march=k8,$(call cc-option,-march=athlon,-march=i686 $(align)-functions=4))
-cflags-$(CONFIG_MCRUSOE)	+= -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
-cflags-$(CONFIG_MEFFICEON)	+= -march=i686 $(call cc-option,-mtune=pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
-cflags-$(CONFIG_MWINCHIPC6)	+= $(call cc-option,-march=winchip-c6,-march=i586)
-cflags-$(CONFIG_MWINCHIP2)	+= $(call cc-option,-march=winchip2,-march=i586)
-cflags-$(CONFIG_MWINCHIP3D)	+= $(call cc-option,-march=winchip2,-march=i586)
-cflags-$(CONFIG_MCYRIXIII)	+= $(call cc-option,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
-cflags-$(CONFIG_MVIAC3_2)	+= $(call cc-option,-march=c3-2,-march=i686)
-
-# AMD Elan support
-cflags-$(CONFIG_X86_ELAN)	+= -march=i486
-
-# Geode GX1 support
-cflags-$(CONFIG_MGEODEGX1)		+= $(call cc-option,-march=pentium-mmx,-march=i486)
+# CPU-specific tuning. Anything which can be shared with UML should go here.
+include $(srctree)/arch/i386/Makefile.cpu
 
 # -mregparm=3 works ok on gcc-3.0 and later
 #
diff --git a/arch/i386/Makefile.cpu b/arch/i386/Makefile.cpu
new file mode 100644
index 000000000000..8e51456df23d
--- /dev/null
+++ b/arch/i386/Makefile.cpu
@@ -0,0 +1,41 @@
+# CPU tuning section - shared with UML.
+# Must change only cflags-y (or [yn]), not CFLAGS! That makes a difference for UML.
+
+#-mtune exists since gcc 3.4, and some -mcpu flavors didn't exist in gcc 2.95.
+HAS_MTUNE	:= $(call cc-option-yn, -mtune=i386)
+ifeq ($(HAS_MTUNE),y)
+tune		= $(call cc-option,-mtune=$(1),)
+else
+tune		= $(call cc-option,-mcpu=$(1),)
+endif
+
+align := $(cc-option-align)
+cflags-$(CONFIG_M386)		+= -march=i386
+cflags-$(CONFIG_M486)		+= -march=i486
+cflags-$(CONFIG_M586)		+= -march=i586
+cflags-$(CONFIG_M586TSC)	+= -march=i586
+cflags-$(CONFIG_M586MMX)	+= $(call cc-option,-march=pentium-mmx,-march=i586)
+cflags-$(CONFIG_M686)		+= -march=i686
+cflags-$(CONFIG_MPENTIUMII)	+= -march=i686 $(call tune,pentium2)
+cflags-$(CONFIG_MPENTIUMIII)	+= -march=i686 $(call tune,pentium3)
+cflags-$(CONFIG_MPENTIUMM)	+= -march=i686 $(call tune,pentium3)
+cflags-$(CONFIG_MPENTIUM4)	+= -march=i686 $(call tune,pentium4)
+cflags-$(CONFIG_MK6)		+= -march=k6
+# Please note, that patches that add -march=athlon-xp and friends are pointless.
+# They make zero difference whatsosever to performance at this time.
+cflags-$(CONFIG_MK7)		+= $(call cc-option,-march=athlon,-march=i686 $(align)-functions=4)
+cflags-$(CONFIG_MK8)		+= $(call cc-option,-march=k8,$(call cc-option,-march=athlon,-march=i686 $(align)-functions=4))
+cflags-$(CONFIG_MCRUSOE)	+= -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+cflags-$(CONFIG_MEFFICEON)	+= -march=i686 $(call tune,pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+cflags-$(CONFIG_MWINCHIPC6)	+= $(call cc-option,-march=winchip-c6,-march=i586)
+cflags-$(CONFIG_MWINCHIP2)	+= $(call cc-option,-march=winchip2,-march=i586)
+cflags-$(CONFIG_MWINCHIP3D)	+= $(call cc-option,-march=winchip2,-march=i586)
+cflags-$(CONFIG_MCYRIXIII)	+= $(call cc-option,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+cflags-$(CONFIG_MVIAC3_2)	+= $(call cc-option,-march=c3-2,-march=i686)
+
+# AMD Elan support
+cflags-$(CONFIG_X86_ELAN)	+= -march=i486
+
+# Geode GX1 support
+cflags-$(CONFIG_MGEODEGX1)		+= $(call cc-option,-march=pentium-mmx,-march=i486)
+
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index 5546ddebec33..9204be6eedb3 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -803,6 +803,7 @@ no_apic:
 
 void __init init_apic_mappings(void)
 {
+	unsigned int orig_apicid;
 	unsigned long apic_phys;
 
 	/*
@@ -824,8 +825,11 @@ void __init init_apic_mappings(void)
 	 * Fetch the APIC ID of the BSP in case we have a
 	 * default configuration (or the MP table is broken).
 	 */
-	if (boot_cpu_physical_apicid == -1U)
-		boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+	orig_apicid = boot_cpu_physical_apicid;
+	boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+	if ((orig_apicid != -1U) && (orig_apicid != boot_cpu_physical_apicid))
+		printk(KERN_WARNING "Boot APIC ID in local APIC unexpected (%d vs %d)",
+			orig_apicid, boot_cpu_physical_apicid);
 
 #ifdef CONFIG_X86_IO_APIC
 	{
@@ -1046,10 +1050,11 @@ static unsigned int calibration_result;
 
 void __init setup_boot_APIC_clock(void)
 {
+	unsigned long flags;
 	apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n");
 	using_apic_timer = 1;
 
-	local_irq_disable();
+	local_irq_save(flags);
 
 	calibration_result = calibrate_APIC_clock();
 	/*
@@ -1057,7 +1062,7 @@ void __init setup_boot_APIC_clock(void)
 	 */
 	setup_APIC_timer(calibration_result);
 
-	local_irq_enable();
+	local_irq_restore(flags);
 }
 
 void __devinit setup_secondary_APIC_clock(void)
@@ -1254,40 +1259,81 @@ fastcall void smp_error_interrupt(struct pt_regs *regs)
 }
 
 /*
- * This initializes the IO-APIC and APIC hardware if this is
- * a UP kernel.
+ * This initializes the IO-APIC and APIC hardware.
  */
-int __init APIC_init_uniprocessor (void)
+int __init APIC_init(void)
 {
-	if (enable_local_apic < 0)
-		clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+	if (enable_local_apic < 0) {
+		printk(KERN_INFO "APIC disabled\n");
+		return -1;
+	}
 
-	if (!smp_found_config && !cpu_has_apic)
+	/* See if we have a SMP configuration or have forced enabled
+	 * the local apic.
+	 */
+	if (!smp_found_config && !acpi_lapic && !cpu_has_apic) {
+		enable_local_apic = -1;
 		return -1;
+	}
 
 	/*
-	 * Complain if the BIOS pretends there is one.
+	 * Complain if the BIOS pretends there is an apic.
+	 * Then get out because we don't have an a local apic.
 	 */
 	if (!cpu_has_apic && APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
 		printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
 			boot_cpu_physical_apicid);
+		printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
+		enable_local_apic = -1;
 		return -1;
 	}
 
 	verify_local_APIC();
 
+	/*
+	 * Should not be necessary because the MP table should list the boot
+	 * CPU too, but we do it for the sake of robustness anyway.
+	 * Makes no sense to do this check in clustered apic mode, so skip it
+	 */
+	if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
+		printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
+				boot_cpu_physical_apicid);
+		physid_set(boot_cpu_physical_apicid, phys_cpu_present_map);
+	}
+
+	/*
+	 * Switch from PIC to APIC mode.
+	 */
 	connect_bsp_APIC();
+	setup_local_APIC();
 
-	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+#ifdef CONFIG_X86_IO_APIC
+	/*
+	 * Now start the IO-APICs
+	 */
+	if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
+		setup_IO_APIC();
+#endif
+	return 0;
+}
 
-	setup_local_APIC();
+void __init APIC_late_time_init(void)
+{
+	/* Improve our loops per jiffy estimate */
+	loops_per_jiffy = ((1000 + HZ - 1)/HZ)*cpu_khz;
+	boot_cpu_data.loops_per_jiffy = loops_per_jiffy;
+	cpu_data[0].loops_per_jiffy = loops_per_jiffy;
+
+	/* setup_apic_nmi_watchdog doesn't work properly before cpu_khz is
+	 * initialized.  So redo it here to ensure the boot cpu is setup
+	 * properly.
+	 */
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		setup_apic_nmi_watchdog();
 
 #ifdef CONFIG_X86_IO_APIC
-	if (smp_found_config)
-		if (!skip_ioapic_setup && nr_ioapics)
-			setup_IO_APIC();
+	if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
+		IO_APIC_late_time_init();
 #endif
 	setup_boot_APIC_clock();
-
-	return 0;
 }
diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c
index d7811c4e8b50..d2ef0c2aa93e 100644
--- a/arch/i386/kernel/apm.c
+++ b/arch/i386/kernel/apm.c
@@ -597,12 +597,14 @@ static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in,
 	cpumask_t		cpus;
 	int			cpu;
 	struct desc_struct	save_desc_40;
+	struct desc_struct	*gdt;
 
 	cpus = apm_save_cpus();
 	
 	cpu = get_cpu();
-	save_desc_40 = per_cpu(cpu_gdt_table, cpu)[0x40 / 8];
-	per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = bad_bios_desc;
+	gdt = get_cpu_gdt_table(cpu);
+	save_desc_40 = gdt[0x40 / 8];
+	gdt[0x40 / 8] = bad_bios_desc;
 
 	local_save_flags(flags);
 	APM_DO_CLI;
@@ -610,7 +612,7 @@ static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in,
 	apm_bios_call_asm(func, ebx_in, ecx_in, eax, ebx, ecx, edx, esi);
 	APM_DO_RESTORE_SEGS;
 	local_irq_restore(flags);
-	per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = save_desc_40;
+	gdt[0x40 / 8] = save_desc_40;
 	put_cpu();
 	apm_restore_cpus(cpus);
 	
@@ -639,13 +641,14 @@ static u8 apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax)
 	cpumask_t		cpus;
 	int			cpu;
 	struct desc_struct	save_desc_40;
-
+	struct desc_struct	*gdt;
 
 	cpus = apm_save_cpus();
 	
 	cpu = get_cpu();
-	save_desc_40 = per_cpu(cpu_gdt_table, cpu)[0x40 / 8];
-	per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = bad_bios_desc;
+	gdt = get_cpu_gdt_table(cpu);
+	save_desc_40 = gdt[0x40 / 8];
+	gdt[0x40 / 8] = bad_bios_desc;
 
 	local_save_flags(flags);
 	APM_DO_CLI;
@@ -653,7 +656,7 @@ static u8 apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax)
 	error = apm_bios_call_simple_asm(func, ebx_in, ecx_in, eax);
 	APM_DO_RESTORE_SEGS;
 	local_irq_restore(flags);
-	__get_cpu_var(cpu_gdt_table)[0x40 / 8] = save_desc_40;
+	gdt[0x40 / 8] = save_desc_40;
 	put_cpu();
 	apm_restore_cpus(cpus);
 	return error;
@@ -2295,35 +2298,36 @@ static int __init apm_init(void)
 	apm_bios_entry.segment = APM_CS;
 
 	for (i = 0; i < NR_CPUS; i++) {
-		set_base(per_cpu(cpu_gdt_table, i)[APM_CS >> 3],
+		struct desc_struct *gdt = get_cpu_gdt_table(i);
+		set_base(gdt[APM_CS >> 3],
 			 __va((unsigned long)apm_info.bios.cseg << 4));
-		set_base(per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3],
+		set_base(gdt[APM_CS_16 >> 3],
 			 __va((unsigned long)apm_info.bios.cseg_16 << 4));
-		set_base(per_cpu(cpu_gdt_table, i)[APM_DS >> 3],
+		set_base(gdt[APM_DS >> 3],
 			 __va((unsigned long)apm_info.bios.dseg << 4));
 #ifndef APM_RELAX_SEGMENTS
 		if (apm_info.bios.version == 0x100) {
 #endif
 			/* For ASUS motherboard, Award BIOS rev 110 (and others?) */
-			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3], 64 * 1024 - 1);
+			_set_limit((char *)&gdt[APM_CS >> 3], 64 * 1024 - 1);
 			/* For some unknown machine. */
-			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3], 64 * 1024 - 1);
+			_set_limit((char *)&gdt[APM_CS_16 >> 3], 64 * 1024 - 1);
 			/* For the DEC Hinote Ultra CT475 (and others?) */
-			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_DS >> 3], 64 * 1024 - 1);
+			_set_limit((char *)&gdt[APM_DS >> 3], 64 * 1024 - 1);
 #ifndef APM_RELAX_SEGMENTS
 		} else {
-			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3],
+			_set_limit((char *)&gdt[APM_CS >> 3],
 				(apm_info.bios.cseg_len - 1) & 0xffff);
-			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3],
+			_set_limit((char *)&gdt[APM_CS_16 >> 3],
 				(apm_info.bios.cseg_16_len - 1) & 0xffff);
-			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_DS >> 3],
+			_set_limit((char *)&gdt[APM_DS >> 3],
 				(apm_info.bios.dseg_len - 1) & 0xffff);
 		      /* workaround for broken BIOSes */
 	                if (apm_info.bios.cseg_len <= apm_info.bios.offset)
-        	                _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3], 64 * 1024 -1);
+        	                _set_limit((char *)&gdt[APM_CS >> 3], 64 * 1024 -1);
                        if (apm_info.bios.dseg_len <= 0x40) { /* 0x40 * 4kB == 64kB */
                         	/* for the BIOS that assumes granularity = 1 */
-                        	per_cpu(cpu_gdt_table, i)[APM_DS >> 3].b |= 0x800000;
+                        	gdt[APM_DS >> 3].b |= 0x800000;
                         	printk(KERN_NOTICE "apm: we set the granularity of dseg.\n");
         	        }
 		}
diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c
index 9ad43be9a01f..74145a33cb0f 100644
--- a/arch/i386/kernel/cpu/common.c
+++ b/arch/i386/kernel/cpu/common.c
@@ -573,6 +573,7 @@ void __devinit cpu_init(void)
 	int cpu = smp_processor_id();
 	struct tss_struct * t = &per_cpu(init_tss, cpu);
 	struct thread_struct *thread = &current->thread;
+	struct desc_struct *gdt = get_cpu_gdt_table(cpu);
 	__u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu);
 
 	if (cpu_test_and_set(cpu, cpu_initialized)) {
@@ -594,24 +595,16 @@ void __devinit cpu_init(void)
 	 * Initialize the per-CPU GDT with the boot GDT,
 	 * and set up the GDT descriptor:
 	 */
-	memcpy(&per_cpu(cpu_gdt_table, cpu), cpu_gdt_table,
-	       GDT_SIZE);
+ 	memcpy(gdt, cpu_gdt_table, GDT_SIZE);
 
 	/* Set up GDT entry for 16bit stack */
-	*(__u64 *)&(per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_ESPFIX_SS]) |=
+ 	*(__u64 *)(&gdt[GDT_ENTRY_ESPFIX_SS]) |=
 		((((__u64)stk16_off) << 16) & 0x000000ffffff0000ULL) |
 		((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) |
 		(CPU_16BIT_STACK_SIZE - 1);
 
 	cpu_gdt_descr[cpu].size = GDT_SIZE - 1;
-	cpu_gdt_descr[cpu].address =
-	    (unsigned long)&per_cpu(cpu_gdt_table, cpu);
-
-	/*
-	 * Set up the per-thread TLS descriptor cache:
-	 */
-	memcpy(thread->tls_array, &per_cpu(cpu_gdt_table, cpu),
-		GDT_ENTRY_TLS_ENTRIES * 8);
+ 	cpu_gdt_descr[cpu].address = (unsigned long)gdt;
 
 	load_gdt(&cpu_gdt_descr[cpu]);
 	load_idt(&idt_descr);
diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
index 822c8ce9d1f1..caa9f7711343 100644
--- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -32,6 +32,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/compiler.h>
+#include <linux/sched.h>	/* current */
 #include <asm/io.h>
 #include <asm/delay.h>
 #include <asm/uaccess.h>
diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
index aa622d52c6e5..270f2188d68b 100644
--- a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
@@ -28,6 +28,7 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 #include <linux/cpumask.h>
+#include <linux/sched.h>	/* current / set_cpus_allowed() */
 
 #include <asm/processor.h> 
 #include <asm/msr.h>
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
index 58ca98fdc2ca..2d5c9adba0cd 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -32,6 +32,7 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/cpumask.h>
+#include <linux/sched.h>	/* for current / set_cpus_allowed() */
 
 #include <asm/msr.h>
 #include <asm/io.h>
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
index c397b6220430..1465974256c9 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 #include <linux/config.h>
+#include <linux/sched.h>	/* current */
 #include <linux/delay.h>
 #include <linux/compiler.h>
 
diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c
index 9e0d5f83cb9f..4dc42a189ae5 100644
--- a/arch/i386/kernel/cpu/intel_cacheinfo.c
+++ b/arch/i386/kernel/cpu/intel_cacheinfo.c
@@ -3,6 +3,7 @@
  *
  *      Changes:
  *      Venkatesh Pallipadi	: Adding cache identification through cpuid(4)
+ *		Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure.
  */
 
 #include <linux/init.h>
@@ -10,6 +11,7 @@
 #include <linux/device.h>
 #include <linux/compiler.h>
 #include <linux/cpu.h>
+#include <linux/sched.h>
 
 #include <asm/processor.h>
 #include <asm/smp.h>
@@ -28,7 +30,7 @@ struct _cache_table
 };
 
 /* all the cache descriptor types we care about (no TLB or trace cache entries) */
-static struct _cache_table cache_table[] __devinitdata =
+static struct _cache_table cache_table[] __cpuinitdata =
 {
 	{ 0x06, LVL_1_INST, 8 },	/* 4-way set assoc, 32 byte line size */
 	{ 0x08, LVL_1_INST, 16 },	/* 4-way set assoc, 32 byte line size */
@@ -117,10 +119,9 @@ struct _cpuid4_info {
 	cpumask_t shared_cpu_map;
 };
 
-#define MAX_CACHE_LEAVES		4
 static unsigned short			num_cache_leaves;
 
-static int __devinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
+static int __cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
 {
 	unsigned int		eax, ebx, ecx, edx;
 	union _cpuid4_leaf_eax	cache_eax;
@@ -144,23 +145,18 @@ static int __init find_num_cache_leaves(void)
 {
 	unsigned int		eax, ebx, ecx, edx;
 	union _cpuid4_leaf_eax	cache_eax;
-	int 			i;
-	int 			retval;
+	int 			i = -1;
 
-	retval = MAX_CACHE_LEAVES;
-	/* Do cpuid(4) loop to find out num_cache_leaves */
-	for (i = 0; i < MAX_CACHE_LEAVES; i++) {
+	do {
+		++i;
+		/* Do cpuid(4) loop to find out num_cache_leaves */
 		cpuid_count(4, i, &eax, &ebx, &ecx, &edx);
 		cache_eax.full = eax;
-		if (cache_eax.split.type == CACHE_TYPE_NULL) {
-			retval = i;
-			break;
-		}
-	}
-	return retval;
+	} while (cache_eax.split.type != CACHE_TYPE_NULL);
+	return i;
 }
 
-unsigned int __devinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
+unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 {
 	unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */
 	unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */
@@ -284,13 +280,7 @@ unsigned int __devinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 		if ( l3 )
 			printk(KERN_INFO "CPU: L3 cache: %dK\n", l3);
 
-		/*
-		 * This assumes the L3 cache is shared; it typically lives in
-		 * the northbridge.  The L1 caches are included by the L2
-		 * cache, and so should not be included for the purpose of
-		 * SMP switching weights.
-		 */
-		c->x86_cache_size = l2 ? l2 : (l1i+l1d);
+		c->x86_cache_size = l3 ? l3 : (l2 ? l2 : (l1i+l1d));
 	}
 
 	return l2;
@@ -301,7 +291,7 @@ static struct _cpuid4_info *cpuid4_info[NR_CPUS];
 #define CPUID4_INFO_IDX(x,y)    (&((cpuid4_info[x])[y]))
 
 #ifdef CONFIG_SMP
-static void __devinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
 {
 	struct _cpuid4_info	*this_leaf;
 	unsigned long num_threads_sharing;
@@ -334,7 +324,7 @@ static void free_cache_attributes(unsigned int cpu)
 	cpuid4_info[cpu] = NULL;
 }
 
-static int __devinit detect_cache_attributes(unsigned int cpu)
+static int __cpuinit detect_cache_attributes(unsigned int cpu)
 {
 	struct _cpuid4_info	*this_leaf;
 	unsigned long 		j;
@@ -511,7 +501,7 @@ static void cpuid4_cache_sysfs_exit(unsigned int cpu)
 	free_cache_attributes(cpu);
 }
 
-static int __devinit cpuid4_cache_sysfs_init(unsigned int cpu)
+static int __cpuinit cpuid4_cache_sysfs_init(unsigned int cpu)
 {
 
 	if (num_cache_leaves == 0)
@@ -542,7 +532,7 @@ err_out:
 }
 
 /* Add/Remove cache interface for CPU device */
-static int __devinit cache_add_dev(struct sys_device * sys_dev)
+static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 {
 	unsigned int cpu = sys_dev->id;
 	unsigned long i, j;
@@ -579,7 +569,7 @@ static int __devinit cache_add_dev(struct sys_device * sys_dev)
 	return retval;
 }
 
-static int __devexit cache_remove_dev(struct sys_device * sys_dev)
+static void __cpuexit cache_remove_dev(struct sys_device * sys_dev)
 {
 	unsigned int cpu = sys_dev->id;
 	unsigned long i;
@@ -588,24 +578,49 @@ static int __devexit cache_remove_dev(struct sys_device * sys_dev)
 		kobject_unregister(&(INDEX_KOBJECT_PTR(cpu,i)->kobj));
 	kobject_unregister(cache_kobject[cpu]);
 	cpuid4_cache_sysfs_exit(cpu);
-	return 0;
+	return;
+}
+
+static int __cpuinit cacheinfo_cpu_callback(struct notifier_block *nfb,
+					unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+	struct sys_device *sys_dev;
+
+	sys_dev = get_cpu_sysdev(cpu);
+	switch (action) {
+	case CPU_ONLINE:
+		cache_add_dev(sys_dev);
+		break;
+	case CPU_DEAD:
+		cache_remove_dev(sys_dev);
+		break;
+	}
+	return NOTIFY_OK;
 }
 
-static struct sysdev_driver cache_sysdev_driver = {
-	.add = cache_add_dev,
-	.remove = __devexit_p(cache_remove_dev),
+static struct notifier_block cacheinfo_cpu_notifier =
+{
+    .notifier_call = cacheinfo_cpu_callback,
 };
 
-/* Register/Unregister the cpu_cache driver */
-static int __devinit cache_register_driver(void)
+static int __cpuinit cache_sysfs_init(void)
 {
+	int i;
+
 	if (num_cache_leaves == 0)
 		return 0;
 
-	return sysdev_driver_register(&cpu_sysdev_class,&cache_sysdev_driver);
+	register_cpu_notifier(&cacheinfo_cpu_notifier);
+
+	for_each_online_cpu(i) {
+		cacheinfo_cpu_callback(&cacheinfo_cpu_notifier, CPU_ONLINE,
+			(void *)(long)i);
+	}
+
+	return 0;
 }
 
-device_initcall(cache_register_driver);
+device_initcall(cache_sysfs_init);
 
 #endif
-
diff --git a/arch/i386/kernel/cpu/mcheck/p6.c b/arch/i386/kernel/cpu/mcheck/p6.c
index 3c035b8fa3d9..979b18bc95c1 100644
--- a/arch/i386/kernel/cpu/mcheck/p6.c
+++ b/arch/i386/kernel/cpu/mcheck/p6.c
@@ -102,11 +102,16 @@ void __devinit intel_p6_mcheck_init(struct cpuinfo_x86 *c)
 		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
 	nr_mce_banks = l & 0xff;
 
-	/* Don't enable bank 0 on intel P6 cores, it goes bang quickly. */
-	for (i=1; i<nr_mce_banks; i++) {
+	/*
+	 * Following the example in IA-32 SDM Vol 3:
+	 * - MC0_CTL should not be written
+	 * - Status registers on all banks should be cleared on reset
+	 */
+	for (i=1; i<nr_mce_banks; i++)
 		wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+
+	for (i=0; i<nr_mce_banks; i++)
 		wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
-	}
 
 	set_in_cr4 (X86_CR4_MCE);
 	printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
diff --git a/arch/i386/kernel/cpu/mtrr/if.c b/arch/i386/kernel/cpu/mtrr/if.c
index 1923e0aed26a..cf39e205d33c 100644
--- a/arch/i386/kernel/cpu/mtrr/if.c
+++ b/arch/i386/kernel/cpu/mtrr/if.c
@@ -149,60 +149,89 @@ mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
 	return -EINVAL;
 }
 
-static int
-mtrr_ioctl(struct inode *inode, struct file *file,
-	   unsigned int cmd, unsigned long __arg)
+static long
+mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg)
 {
-	int err;
+	int err = 0;
 	mtrr_type type;
 	struct mtrr_sentry sentry;
 	struct mtrr_gentry gentry;
 	void __user *arg = (void __user *) __arg;
 
 	switch (cmd) {
+	case MTRRIOC_ADD_ENTRY:
+	case MTRRIOC_SET_ENTRY:
+	case MTRRIOC_DEL_ENTRY:
+	case MTRRIOC_KILL_ENTRY:
+	case MTRRIOC_ADD_PAGE_ENTRY:
+	case MTRRIOC_SET_PAGE_ENTRY:
+	case MTRRIOC_DEL_PAGE_ENTRY:
+	case MTRRIOC_KILL_PAGE_ENTRY:
+		if (copy_from_user(&sentry, arg, sizeof sentry))
+			return -EFAULT;
+		break;
+	case MTRRIOC_GET_ENTRY:
+	case MTRRIOC_GET_PAGE_ENTRY:
+		if (copy_from_user(&gentry, arg, sizeof gentry))
+			return -EFAULT;
+		break;
+#ifdef CONFIG_COMPAT
+	case MTRRIOC32_ADD_ENTRY:
+	case MTRRIOC32_SET_ENTRY:
+	case MTRRIOC32_DEL_ENTRY:
+	case MTRRIOC32_KILL_ENTRY:
+	case MTRRIOC32_ADD_PAGE_ENTRY:
+	case MTRRIOC32_SET_PAGE_ENTRY:
+	case MTRRIOC32_DEL_PAGE_ENTRY:
+	case MTRRIOC32_KILL_PAGE_ENTRY: {
+		struct mtrr_sentry32 __user *s32 = (struct mtrr_sentry32 __user *)__arg;
+		err = get_user(sentry.base, &s32->base);
+		err |= get_user(sentry.size, &s32->size);
+		err |= get_user(sentry.type, &s32->type);
+		if (err)
+			return err;
+		break;
+	}
+	case MTRRIOC32_GET_ENTRY:
+	case MTRRIOC32_GET_PAGE_ENTRY: {
+		struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)__arg;
+		err = get_user(gentry.regnum, &g32->regnum);
+		err |= get_user(gentry.base, &g32->base);
+		err |= get_user(gentry.size, &g32->size);
+		err |= get_user(gentry.type, &g32->type);
+		if (err)
+			return err;
+		break;
+	}
+#endif
+	}
+
+	switch (cmd) {
 	default:
 		return -ENOTTY;
 	case MTRRIOC_ADD_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err =
 		    mtrr_file_add(sentry.base, sentry.size, sentry.type, 1,
 				  file, 0);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_SET_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err = mtrr_add(sentry.base, sentry.size, sentry.type, 0);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_DEL_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err = mtrr_file_del(sentry.base, sentry.size, file, 0);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_KILL_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err = mtrr_del(-1, sentry.base, sentry.size);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_GET_ENTRY:
-		if (copy_from_user(&gentry, arg, sizeof gentry))
-			return -EFAULT;
 		if (gentry.regnum >= num_var_ranges)
 			return -EINVAL;
 		mtrr_if->get(gentry.regnum, &gentry.base, &gentry.size, &type);
@@ -217,60 +246,59 @@ mtrr_ioctl(struct inode *inode, struct file *file,
 			gentry.type = type;
 		}
 
-		if (copy_to_user(arg, &gentry, sizeof gentry))
-			return -EFAULT;
 		break;
 	case MTRRIOC_ADD_PAGE_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err =
 		    mtrr_file_add(sentry.base, sentry.size, sentry.type, 1,
 				  file, 1);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_SET_PAGE_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err = mtrr_add_page(sentry.base, sentry.size, sentry.type, 0);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_DEL_PAGE_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err = mtrr_file_del(sentry.base, sentry.size, file, 1);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_KILL_PAGE_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err = mtrr_del_page(-1, sentry.base, sentry.size);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_GET_PAGE_ENTRY:
-		if (copy_from_user(&gentry, arg, sizeof gentry))
-			return -EFAULT;
 		if (gentry.regnum >= num_var_ranges)
 			return -EINVAL;
 		mtrr_if->get(gentry.regnum, &gentry.base, &gentry.size, &type);
 		gentry.type = type;
+		break;
+	}
+
+	if (err)
+		return err;
 
+	switch(cmd) {
+	case MTRRIOC_GET_ENTRY:
+	case MTRRIOC_GET_PAGE_ENTRY:
 		if (copy_to_user(arg, &gentry, sizeof gentry))
-			return -EFAULT;
+			err = -EFAULT;
+		break;
+#ifdef CONFIG_COMPAT
+	case MTRRIOC32_GET_ENTRY:
+	case MTRRIOC32_GET_PAGE_ENTRY: {
+		struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)__arg;
+		err = put_user(gentry.base, &g32->base);
+		err |= put_user(gentry.size, &g32->size);
+		err |= put_user(gentry.regnum, &g32->regnum);
+		err |= put_user(gentry.type, &g32->type);
 		break;
 	}
-	return 0;
+#endif
+	}
+	return err;
 }
 
 static int
@@ -310,7 +338,8 @@ static struct file_operations mtrr_fops = {
 	.read    = seq_read,
 	.llseek  = seq_lseek,
 	.write   = mtrr_write,
-	.ioctl   = mtrr_ioctl,
+	.unlocked_ioctl = mtrr_ioctl,
+	.compat_ioctl = mtrr_ioctl,
 	.release = mtrr_close,
 };
 
diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c
index 8bd77d948a84..41b871ecf4b3 100644
--- a/arch/i386/kernel/cpu/proc.c
+++ b/arch/i386/kernel/cpu/proc.c
@@ -44,7 +44,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 
 		/* Intel-defined (#2) */
-		"pni", NULL, NULL, "monitor", "ds_cpl", NULL, NULL, "est",
+		"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", NULL, "est",
 		"tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c
index 4647db4ad6de..13bae799e626 100644
--- a/arch/i386/kernel/cpuid.c
+++ b/arch/i386/kernel/cpuid.c
@@ -163,7 +163,7 @@ static int cpuid_class_device_create(int i)
 	int err = 0;
 	struct class_device *class_err;
 
-	class_err = class_device_create(cpuid_class, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i);
+	class_err = class_device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i);
 	if (IS_ERR(class_err))
 		err = PTR_ERR(class_err);
 	return err;
diff --git a/arch/i386/kernel/crash.c b/arch/i386/kernel/crash.c
index 0248e084017c..af809ccf5fbe 100644
--- a/arch/i386/kernel/crash.c
+++ b/arch/i386/kernel/crash.c
@@ -21,7 +21,6 @@
 #include <asm/hardirq.h>
 #include <asm/nmi.h>
 #include <asm/hw_irq.h>
-#include <asm/apic.h>
 #include <mach_ipi.h>
 
 
@@ -148,7 +147,6 @@ static int crash_nmi_callback(struct pt_regs *regs, int cpu)
 		regs = &fixed_regs;
 	}
 	crash_save_this_cpu(regs, cpu);
-	disable_local_APIC();
 	atomic_dec(&waiting_for_crash_ipi);
 	/* Assume hlt works */
 	halt();
@@ -188,7 +186,6 @@ static void nmi_shootdown_cpus(void)
 	}
 
 	/* Leave the nmi callback set */
-	disable_local_APIC();
 }
 #else
 static void nmi_shootdown_cpus(void)
@@ -213,9 +210,5 @@ void machine_crash_shutdown(struct pt_regs *regs)
 	/* Make a note of crashing cpu. Will be used in NMI callback.*/
 	crashing_cpu = smp_processor_id();
 	nmi_shootdown_cpus();
-	lapic_shutdown();
-#if defined(CONFIG_X86_IO_APIC)
-	disable_IO_APIC();
-#endif
 	crash_save_self(regs);
 }
diff --git a/arch/i386/kernel/i8259.c b/arch/i386/kernel/i8259.c
index 323ef8ab3244..d86f24909284 100644
--- a/arch/i386/kernel/i8259.c
+++ b/arch/i386/kernel/i8259.c
@@ -435,4 +435,8 @@ void __init init_IRQ(void)
 		setup_irq(FPU_IRQ, &fpu_irq);
 
 	irq_ctx_init(smp_processor_id());
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	APIC_init();
+#endif
 }
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
index fb3991e8229e..5a77c52b20a9 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/i386/kernel/io_apic.c
@@ -46,6 +46,9 @@
 int (*ioapic_renumber_irq)(int ioapic, int irq);
 atomic_t irq_mis_count;
 
+/* Where if anywhere is the i8259 connect in external int mode */
+static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
+
 static DEFINE_SPINLOCK(ioapic_lock);
 
 /*
@@ -738,7 +741,7 @@ static int find_irq_entry(int apic, int pin, int type)
 /*
  * Find the pin to which IRQ[irq] (ISA) is connected
  */
-static int find_isa_irq_pin(int irq, int type)
+static int __init find_isa_irq_pin(int irq, int type)
 {
 	int i;
 
@@ -758,6 +761,33 @@ static int find_isa_irq_pin(int irq, int type)
 	return -1;
 }
 
+static int __init find_isa_irq_apic(int irq, int type)
+{
+	int i;
+
+	for (i = 0; i < mp_irq_entries; i++) {
+		int lbus = mp_irqs[i].mpc_srcbus;
+
+		if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
+		     mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
+		     mp_bus_id_to_type[lbus] == MP_BUS_MCA ||
+		     mp_bus_id_to_type[lbus] == MP_BUS_NEC98
+		    ) &&
+		    (mp_irqs[i].mpc_irqtype == type) &&
+		    (mp_irqs[i].mpc_srcbusirq == irq))
+			break;
+	}
+	if (i < mp_irq_entries) {
+		int apic;
+		for(apic = 0; apic < nr_ioapics; apic++) {
+			if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
+				return apic;
+		}
+	}
+
+	return -1;
+}
+
 /*
  * Find a specific PCI IRQ entry.
  * Not an __init, possibly needed by modules
@@ -1253,7 +1283,7 @@ static void __init setup_IO_APIC_irqs(void)
 /*
  * Set up the 8259A-master output pin:
  */
-static void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector)
+static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
 {
 	struct IO_APIC_route_entry entry;
 	unsigned long flags;
@@ -1287,8 +1317,8 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector)
 	 * Add it to the IO-APIC irq-routing table:
 	 */
 	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1));
-	io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0));
+	io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
+	io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	enable_8259A_irq(0);
@@ -1595,7 +1625,8 @@ void /*__init*/ print_PIC(void)
 static void __init enable_IO_APIC(void)
 {
 	union IO_APIC_reg_01 reg_01;
-	int i;
+	int i8259_apic, i8259_pin;
+	int i, apic;
 	unsigned long flags;
 
 	for (i = 0; i < PIN_MAP_SIZE; i++) {
@@ -1609,11 +1640,52 @@ static void __init enable_IO_APIC(void)
 	/*
 	 * The number of IO-APIC IRQ registers (== #pins):
 	 */
-	for (i = 0; i < nr_ioapics; i++) {
+	for (apic = 0; apic < nr_ioapics; apic++) {
 		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_01.raw = io_apic_read(i, 1);
+		reg_01.raw = io_apic_read(apic, 1);
 		spin_unlock_irqrestore(&ioapic_lock, flags);
-		nr_ioapic_registers[i] = reg_01.bits.entries+1;
+		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
+	}
+	for(apic = 0; apic < nr_ioapics; apic++) {
+		int pin;
+		/* See if any of the pins is in ExtINT mode */
+		for(pin = 0; pin < nr_ioapic_registers[i]; pin++) {
+			struct IO_APIC_route_entry entry;
+			spin_lock_irqsave(&ioapic_lock, flags);
+			*(((int *)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
+			*(((int *)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
+			spin_unlock_irqrestore(&ioapic_lock, flags);
+
+
+			/* If the interrupt line is enabled and in ExtInt mode
+			 * I have found the pin where the i8259 is connected.
+			 */
+			if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
+				ioapic_i8259.apic = apic;
+				ioapic_i8259.pin  = pin;
+				goto found_i8259;
+			}
+		}
+	}
+ found_i8259:
+	/* Look to see what if the MP table has reported the ExtINT */
+	/* If we could not find the appropriate pin by looking at the ioapic
+	 * the i8259 probably is not connected the ioapic but give the
+	 * mptable a chance anyway.
+	 */
+	i8259_pin  = find_isa_irq_pin(0, mp_ExtINT);
+	i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
+	/* Trust the MP table if nothing is setup in the hardware */
+	if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
+		printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
+		ioapic_i8259.pin  = i8259_pin;
+		ioapic_i8259.apic = i8259_apic;
+	}
+	/* Complain if the MP table and the hardware disagree */
+	if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
+		(i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
+	{
+		printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
 	}
 
 	/*
@@ -1627,7 +1699,6 @@ static void __init enable_IO_APIC(void)
  */
 void disable_IO_APIC(void)
 {
-	int pin;
 	/*
 	 * Clear the IO-APIC before rebooting:
 	 */
@@ -1638,8 +1709,7 @@ void disable_IO_APIC(void)
 	 * Put that IOAPIC in virtual wire mode
 	 * so legacy interrupts can be delivered.
 	 */
-	pin = find_isa_irq_pin(0, mp_ExtINT);
-	if (pin != -1) {
+	if (ioapic_i8259.pin != -1) {
 		struct IO_APIC_route_entry entry;
 		unsigned long flags;
 
@@ -1650,7 +1720,7 @@ void disable_IO_APIC(void)
 		entry.polarity        = 0; /* High */
 		entry.delivery_status = 0;
 		entry.dest_mode       = 0; /* Physical */
-		entry.delivery_mode   = 7; /* ExtInt */
+		entry.delivery_mode   = dest_ExtINT; /* ExtInt */
 		entry.vector          = 0;
 		entry.dest.physical.physical_dest = 0;
 
@@ -1659,11 +1729,13 @@ void disable_IO_APIC(void)
 		 * Add it to the IO-APIC irq-routing table:
 		 */
 		spin_lock_irqsave(&ioapic_lock, flags);
-		io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1));
-		io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0));
+		io_apic_write(ioapic_i8259.apic, 0x11+2*ioapic_i8259.pin,
+			*(((int *)&entry)+1));
+		io_apic_write(ioapic_i8259.apic, 0x10+2*ioapic_i8259.pin,
+			*(((int *)&entry)+0));
 		spin_unlock_irqrestore(&ioapic_lock, flags);
 	}
-	disconnect_bsp_APIC(pin != -1);
+	disconnect_bsp_APIC(ioapic_i8259.pin != -1);
 }
 
 /*
@@ -2113,20 +2185,21 @@ static void setup_nmi (void)
  */
 static inline void unlock_ExtINT_logic(void)
 {
-	int pin, i;
+	int apic, pin, i;
 	struct IO_APIC_route_entry entry0, entry1;
 	unsigned char save_control, save_freq_select;
 	unsigned long flags;
 
-	pin = find_isa_irq_pin(8, mp_INT);
+	pin  = find_isa_irq_pin(8, mp_INT);
+	apic = find_isa_irq_apic(8, mp_INT);
 	if (pin == -1)
 		return;
 
 	spin_lock_irqsave(&ioapic_lock, flags);
-	*(((int *)&entry0) + 1) = io_apic_read(0, 0x11 + 2 * pin);
-	*(((int *)&entry0) + 0) = io_apic_read(0, 0x10 + 2 * pin);
+	*(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
+	*(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
 	spin_unlock_irqrestore(&ioapic_lock, flags);
-	clear_IO_APIC_pin(0, pin);
+	clear_IO_APIC_pin(apic, pin);
 
 	memset(&entry1, 0, sizeof(entry1));
 
@@ -2139,8 +2212,8 @@ static inline void unlock_ExtINT_logic(void)
 	entry1.vector = 0;
 
 	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
-	io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
+	io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
+	io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	save_control = CMOS_READ(RTC_CONTROL);
@@ -2158,11 +2231,11 @@ static inline void unlock_ExtINT_logic(void)
 
 	CMOS_WRITE(save_control, RTC_CONTROL);
 	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-	clear_IO_APIC_pin(0, pin);
+	clear_IO_APIC_pin(apic, pin);
 
 	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
-	io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
+	io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
+	io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
@@ -2174,7 +2247,7 @@ static inline void unlock_ExtINT_logic(void)
  */
 static inline void check_timer(void)
 {
-	int pin1, pin2;
+	int apic1, pin1, apic2, pin2;
 	int vector;
 
 	/*
@@ -2196,10 +2269,13 @@ static inline void check_timer(void)
 	timer_ack = 1;
 	enable_8259A_irq(0);
 
-	pin1 = find_isa_irq_pin(0, mp_INT);
-	pin2 = find_isa_irq_pin(0, mp_ExtINT);
+	pin1  = find_isa_irq_pin(0, mp_INT);
+	apic1 = find_isa_irq_apic(0, mp_INT);
+	pin2  = ioapic_i8259.pin;
+	apic2 = ioapic_i8259.apic;
 
-	printk(KERN_INFO "..TIMER: vector=0x%02X pin1=%d pin2=%d\n", vector, pin1, pin2);
+	printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
+		vector, apic1, pin1, apic2, pin2);
 
 	if (pin1 != -1) {
 		/*
@@ -2216,8 +2292,9 @@ static inline void check_timer(void)
 				clear_IO_APIC_pin(0, pin1);
 			return;
 		}
-		clear_IO_APIC_pin(0, pin1);
-		printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to IO-APIC\n");
+		clear_IO_APIC_pin(apic1, pin1);
+		printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to "
+				"IO-APIC\n");
 	}
 
 	printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... ");
@@ -2226,13 +2303,13 @@ static inline void check_timer(void)
 		/*
 		 * legacy devices should be connected to IO APIC #0
 		 */
-		setup_ExtINT_IRQ0_pin(pin2, vector);
+		setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
 		if (timer_irq_works()) {
 			printk("works.\n");
 			if (pin1 != -1)
-				replace_pin_at_irq(0, 0, pin1, 0, pin2);
+				replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
 			else
-				add_pin_to_irq(0, 0, pin2);
+				add_pin_to_irq(0, apic2, pin2);
 			if (nmi_watchdog == NMI_IO_APIC) {
 				setup_nmi();
 			}
@@ -2241,7 +2318,7 @@ static inline void check_timer(void)
 		/*
 		 * Cleanup, just in case ...
 		 */
-		clear_IO_APIC_pin(0, pin2);
+		clear_IO_APIC_pin(apic2, pin2);
 	}
 	printk(" failed.\n");
 
@@ -2310,11 +2387,15 @@ void __init setup_IO_APIC(void)
 	sync_Arb_IDs();
 	setup_IO_APIC_irqs();
 	init_IO_APIC_traps();
-	check_timer();
 	if (!acpi_ioapic)
 		print_IO_APIC();
 }
 
+void __init IO_APIC_late_time_init(void)
+{
+	check_timer();
+}
+
 /*
  *	Called after all the initialization is done. If we didnt find any
  *	APIC bugs then we can allow the modify fast path
diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c
index ce66dcc26d90..1a201a932865 100644
--- a/arch/i386/kernel/irq.c
+++ b/arch/i386/kernel/irq.c
@@ -218,7 +218,7 @@ int show_interrupts(struct seq_file *p, void *v)
 
 	if (i == 0) {
 		seq_printf(p, "           ");
-		for_each_cpu(j)
+		for_each_online_cpu(j)
 			seq_printf(p, "CPU%d       ",j);
 		seq_putc(p, '\n');
 	}
@@ -232,7 +232,7 @@ int show_interrupts(struct seq_file *p, void *v)
 #ifndef CONFIG_SMP
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #else
-		for_each_cpu(j)
+		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
 #endif
 		seq_printf(p, " %14s", irq_desc[i].handler->typename);
@@ -246,12 +246,12 @@ skip:
 		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
 	} else if (i == NR_IRQS) {
 		seq_printf(p, "NMI: ");
-		for_each_cpu(j)
+		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", nmi_count(j));
 		seq_putc(p, '\n');
 #ifdef CONFIG_X86_LOCAL_APIC
 		seq_printf(p, "LOC: ");
-		for_each_cpu(j)
+		for_each_online_cpu(j)
 			seq_printf(p, "%10u ",
 				per_cpu(irq_stat,j).apic_timer_irqs);
 		seq_putc(p, '\n');
diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c
index 27aabfceb67e..8f767d9aa45d 100644
--- a/arch/i386/kernel/mpparse.c
+++ b/arch/i386/kernel/mpparse.c
@@ -69,7 +69,7 @@ unsigned int def_to_bigsmp = 0;
 /* Processor that is doing the boot up */
 unsigned int boot_cpu_physical_apicid = -1U;
 /* Internal processor count */
-static unsigned int __initdata num_processors;
+static unsigned int __devinitdata num_processors;
 
 /* Bitmask of physically existing CPUs */
 physid_mask_t phys_cpu_present_map;
@@ -119,7 +119,7 @@ static int MP_valid_apicid(int apicid, int version)
 }
 #endif
 
-static void __init MP_processor_info (struct mpc_config_processor *m)
+static void __devinit MP_processor_info (struct mpc_config_processor *m)
 {
  	int ver, apicid;
 	physid_mask_t phys_cpu;
@@ -182,17 +182,6 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
 		boot_cpu_physical_apicid = m->mpc_apicid;
 	}
 
-	if (num_processors >= NR_CPUS) {
-		printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
-			"  Processor ignored.\n", NR_CPUS); 
-		return;
-	}
-
-	if (num_processors >= maxcpus) {
-		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
-			" Processor ignored.\n", maxcpus); 
-		return;
-	}
 	ver = m->mpc_apicver;
 
 	if (!MP_valid_apicid(apicid, ver)) {
@@ -201,11 +190,6 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
 		return;
 	}
 
-	cpu_set(num_processors, cpu_possible_map);
-	num_processors++;
-	phys_cpu = apicid_to_cpu_present(apicid);
-	physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
-
 	/*
 	 * Validate version
 	 */
@@ -216,6 +200,25 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
 		ver = 0x10;
 	}
 	apic_version[m->mpc_apicid] = ver;
+
+	phys_cpu = apicid_to_cpu_present(apicid);
+	physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
+
+	if (num_processors >= NR_CPUS) {
+		printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
+			"  Processor ignored.\n", NR_CPUS);
+		return;
+	}
+
+	if (num_processors >= maxcpus) {
+		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
+			" Processor ignored.\n", maxcpus);
+		return;
+	}
+
+	cpu_set(num_processors, cpu_possible_map);
+	num_processors++;
+
 	if ((num_processors > 8) &&
 	    APIC_XAPIC(ver) &&
 	    (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL))
@@ -834,7 +837,7 @@ void __init mp_register_lapic_address (
 }
 
 
-void __init mp_register_lapic (
+void __devinit mp_register_lapic (
 	u8			id, 
 	u8			enabled)
 {
diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c
index 03100d6fc5d6..44470fea4309 100644
--- a/arch/i386/kernel/msr.c
+++ b/arch/i386/kernel/msr.c
@@ -246,7 +246,7 @@ static int msr_class_device_create(int i)
 	int err = 0;
 	struct class_device *class_err;
 
-	class_err = class_device_create(msr_class, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i);
+	class_err = class_device_create(msr_class, NULL, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i);
 	if (IS_ERR(class_err)) 
 		err = PTR_ERR(class_err);
 	return err;
diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c
index 72515b8a1b12..d661703ac1cb 100644
--- a/arch/i386/kernel/nmi.c
+++ b/arch/i386/kernel/nmi.c
@@ -100,16 +100,44 @@ int nmi_active;
 	(P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT|	\
 	 P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE)
 
+#ifdef CONFIG_SMP
+/* The performance counters used by NMI_LOCAL_APIC don't trigger when
+ * the CPU is idle. To make sure the NMI watchdog really ticks on all
+ * CPUs during the test make them busy.
+ */
+static __init void nmi_cpu_busy(void *data)
+{
+	volatile int *endflag = data;
+	local_irq_enable();
+	/* Intentionally don't use cpu_relax here. This is
+	   to make sure that the performance counter really ticks,
+	   even if there is a simulator or similar that catches the
+	   pause instruction. On a real HT machine this is fine because
+	   all other CPUs are busy with "useless" delay loops and don't
+	   care if they get somewhat less cycles. */
+	while (*endflag == 0)
+		barrier();
+}
+#endif
+
 static int __init check_nmi_watchdog(void)
 {
-	unsigned int prev_nmi_count[NR_CPUS];
+	volatile int endflag = 0;
+	unsigned int *prev_nmi_count;
 	int cpu;
 
 	if (nmi_watchdog == NMI_NONE)
 		return 0;
 
+	prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
+	if (!prev_nmi_count)
+		return -1;
+
 	printk(KERN_INFO "Testing NMI watchdog ... ");
 
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
+
 	for (cpu = 0; cpu < NR_CPUS; cpu++)
 		prev_nmi_count[cpu] = per_cpu(irq_stat, cpu).__nmi_count;
 	local_irq_enable();
@@ -123,12 +151,18 @@ static int __init check_nmi_watchdog(void)
 			continue;
 #endif
 		if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
-			printk("CPU#%d: NMI appears to be stuck!\n", cpu);
+			endflag = 1;
+			printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n",
+				cpu,
+				prev_nmi_count[cpu],
+				nmi_count(cpu));
 			nmi_active = 0;
 			lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG;
+			kfree(prev_nmi_count);
 			return -1;
 		}
 	}
+	endflag = 1;
 	printk("OK.\n");
 
 	/* now that we know it works we can reduce NMI frequency to
@@ -136,6 +170,7 @@ static int __init check_nmi_watchdog(void)
 	if (nmi_watchdog == NMI_LOCAL_APIC)
 		nmi_hz = 1;
 
+	kfree(prev_nmi_count);
 	return 0;
 }
 /* This needs to happen later in boot so counters are working */
diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c
index 7b6368bf8974..efd11f09c996 100644
--- a/arch/i386/kernel/ptrace.c
+++ b/arch/i386/kernel/ptrace.c
@@ -354,7 +354,7 @@ ptrace_set_thread_area(struct task_struct *child,
 	return 0;
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
 {
 	struct task_struct *child;
 	struct user * dummy = NULL;
diff --git a/arch/i386/kernel/reboot_fixups.c b/arch/i386/kernel/reboot_fixups.c
index 1b183b378c2c..c9b87330aeea 100644
--- a/arch/i386/kernel/reboot_fixups.c
+++ b/arch/i386/kernel/reboot_fixups.c
@@ -44,7 +44,7 @@ void mach_reboot_fixups(void)
 
 	for (i=0; i < (sizeof(fixups_table)/sizeof(fixups_table[0])); i++) {
 		cur = &(fixups_table[i]);
-		dev = pci_get_device(cur->vendor, cur->device, 0);
+		dev = pci_get_device(cur->vendor, cur->device, NULL);
 		if (!dev)
 			continue;
 
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index 9b8c8a19824d..b48ac635f3c1 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -389,14 +389,24 @@ static void __init limit_regions(unsigned long long size)
 		}
 	}
 	for (i = 0; i < e820.nr_map; i++) {
-		if (e820.map[i].type == E820_RAM) {
-			current_addr = e820.map[i].addr + e820.map[i].size;
-			if (current_addr >= size) {
-				e820.map[i].size -= current_addr-size;
-				e820.nr_map = i + 1;
-				return;
-			}
+		current_addr = e820.map[i].addr + e820.map[i].size;
+		if (current_addr < size)
+			continue;
+
+		if (e820.map[i].type != E820_RAM)
+			continue;
+
+		if (e820.map[i].addr >= size) {
+			/*
+			 * This region starts past the end of the
+			 * requested size, skip it completely.
+			 */
+			e820.nr_map = i;
+		} else {
+			e820.nr_map = i + 1;
+			e820.map[i].size -= current_addr - size;
 		}
+		return;
 	}
 }
 
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index 1fb26d0e30b6..5a2bbe0c4fff 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -87,7 +87,11 @@ EXPORT_SYMBOL(cpu_online_map);
 cpumask_t cpu_callin_map;
 cpumask_t cpu_callout_map;
 EXPORT_SYMBOL(cpu_callout_map);
+#ifdef CONFIG_HOTPLUG_CPU
+cpumask_t cpu_possible_map = CPU_MASK_ALL;
+#else
 cpumask_t cpu_possible_map;
+#endif
 EXPORT_SYMBOL(cpu_possible_map);
 static cpumask_t smp_commenced_mask;
 
@@ -1074,6 +1078,16 @@ void *xquad_portio;
 EXPORT_SYMBOL(xquad_portio);
 #endif
 
+/*
+ * Fall back to non SMP mode after errors.
+ *
+ */
+static __init void disable_smp(void)
+{
+	cpu_set(0, cpu_sibling_map[0]);
+	cpu_set(0, cpu_core_map[0]);
+}
+
 static void __init smp_boot_cpus(unsigned int max_cpus)
 {
 	int apicid, cpu, bit, kicked;
@@ -1086,7 +1100,6 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 	printk("CPU%d: ", 0);
 	print_cpu_info(&cpu_data[0]);
 
-	boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
 	boot_cpu_logical_apicid = logical_smp_processor_id();
 	x86_cpu_to_apicid[0] = boot_cpu_physical_apicid;
 
@@ -1098,68 +1111,27 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 	cpus_clear(cpu_core_map[0]);
 	cpu_set(0, cpu_core_map[0]);
 
+	map_cpu_to_logical_apicid();
+
 	/*
 	 * If we couldn't find an SMP configuration at boot time,
 	 * get out of here now!
 	 */
 	if (!smp_found_config && !acpi_lapic) {
 		printk(KERN_NOTICE "SMP motherboard not detected.\n");
-		smpboot_clear_io_apic_irqs();
-		phys_cpu_present_map = physid_mask_of_physid(0);
-		if (APIC_init_uniprocessor())
-			printk(KERN_NOTICE "Local APIC not detected."
-					   " Using dummy APIC emulation.\n");
-		map_cpu_to_logical_apicid();
-		cpu_set(0, cpu_sibling_map[0]);
-		cpu_set(0, cpu_core_map[0]);
+		disable_smp();
 		return;
 	}
 
 	/*
-	 * Should not be necessary because the MP table should list the boot
-	 * CPU too, but we do it for the sake of robustness anyway.
-	 * Makes no sense to do this check in clustered apic mode, so skip it
-	 */
-	if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
-		printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
-				boot_cpu_physical_apicid);
-		physid_set(hard_smp_processor_id(), phys_cpu_present_map);
-	}
-
-	/*
-	 * If we couldn't find a local APIC, then get out of here now!
-	 */
-	if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) && !cpu_has_apic) {
-		printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
-			boot_cpu_physical_apicid);
-		printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
-		smpboot_clear_io_apic_irqs();
-		phys_cpu_present_map = physid_mask_of_physid(0);
-		cpu_set(0, cpu_sibling_map[0]);
-		cpu_set(0, cpu_core_map[0]);
-		return;
-	}
-
-	verify_local_APIC();
-
-	/*
 	 * If SMP should be disabled, then really disable it!
 	 */
-	if (!max_cpus) {
-		smp_found_config = 0;
-		printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
-		smpboot_clear_io_apic_irqs();
-		phys_cpu_present_map = physid_mask_of_physid(0);
-		cpu_set(0, cpu_sibling_map[0]);
-		cpu_set(0, cpu_core_map[0]);
+	if (!max_cpus || (enable_local_apic < 0)) {
+		printk(KERN_INFO "SMP mode deactivated.\n");
+		disable_smp();
 		return;
 	}
 
-	connect_bsp_APIC();
-	setup_local_APIC();
-	map_cpu_to_logical_apicid();
-
-
 	setup_portio_remap();
 
 	/*
@@ -1240,10 +1212,6 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 	cpu_set(0, cpu_sibling_map[0]);
 	cpu_set(0, cpu_core_map[0]);
 
-	smpboot_setup_io_apic();
-
-	setup_boot_APIC_clock();
-
 	/*
 	 * Synchronize the TSC with the AP
 	 */
diff --git a/arch/i386/kernel/srat.c b/arch/i386/kernel/srat.c
index 516bf5653b02..8de658db8146 100644
--- a/arch/i386/kernel/srat.c
+++ b/arch/i386/kernel/srat.c
@@ -327,7 +327,12 @@ int __init get_memcfg_from_srat(void)
 	int tables = 0;
 	int i = 0;
 
-	acpi_find_root_pointer(ACPI_PHYSICAL_ADDRESSING, rsdp_address);
+	if (ACPI_FAILURE(acpi_find_root_pointer(ACPI_PHYSICAL_ADDRESSING,
+						rsdp_address))) {
+		printk("%s: System description tables not found\n",
+		       __FUNCTION__);
+		goto out_err;
+	}
 
 	if (rsdp_address->pointer_type == ACPI_PHYSICAL_POINTER) {
 		printk("%s: assigning address to rsdp\n", __FUNCTION__);
diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c
index 2883a4d4f01f..07471bba2dc6 100644
--- a/arch/i386/kernel/time.c
+++ b/arch/i386/kernel/time.c
@@ -74,10 +74,6 @@ int pit_latch_buggy;              /* extern */
 
 #include "do_timer.h"
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 unsigned int cpu_khz;	/* Detected as we calibrate the TSC */
 EXPORT_SYMBOL(cpu_khz);
 
@@ -444,8 +440,8 @@ static int time_init_device(void)
 
 device_initcall(time_init_device);
 
-#ifdef CONFIG_HPET_TIMER
 extern void (*late_time_init)(void);
+#ifdef CONFIG_HPET_TIMER
 /* Duplicate of time_init() below, with hpet_enable part added */
 static void __init hpet_time_init(void)
 {
@@ -462,6 +458,11 @@ static void __init hpet_time_init(void)
 	printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name);
 
 	time_init_hook();
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	if (enable_local_apic >= 0)
+		APIC_late_time_init();
+#endif
 }
 #endif
 
@@ -486,4 +487,9 @@ void __init time_init(void)
 	printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name);
 
 	time_init_hook();
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	if (enable_local_apic >= 0)
+		late_time_init = APIC_late_time_init;
+#endif
 }
diff --git a/arch/i386/kernel/time_hpet.c b/arch/i386/kernel/time_hpet.c
index 658c0629ba6a..9caeaa315cd7 100644
--- a/arch/i386/kernel/time_hpet.c
+++ b/arch/i386/kernel/time_hpet.c
@@ -275,6 +275,7 @@ static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ;
 static unsigned long PIE_count;
 
 static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */
+static unsigned int hpet_t1_cmp; /* cached comparator register */
 
 /*
  * Timer 1 for RTC, we do not use periodic interrupt feature,
@@ -306,10 +307,12 @@ int hpet_rtc_timer_init(void)
 	cnt = hpet_readl(HPET_COUNTER);
 	cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq);
 	hpet_writel(cnt, HPET_T1_CMP);
+	hpet_t1_cmp = cnt;
 	local_irq_restore(flags);
 
 	cfg = hpet_readl(HPET_T1_CFG);
-	cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
+	cfg &= ~HPET_TN_PERIODIC;
+	cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
 	hpet_writel(cfg, HPET_T1_CFG);
 
 	return 1;
@@ -319,8 +322,12 @@ static void hpet_rtc_timer_reinit(void)
 {
 	unsigned int cfg, cnt;
 
-	if (!(PIE_on | AIE_on | UIE_on))
+	if (unlikely(!(PIE_on | AIE_on | UIE_on))) {
+		cfg = hpet_readl(HPET_T1_CFG);
+		cfg &= ~HPET_TN_ENABLE;
+		hpet_writel(cfg, HPET_T1_CFG);
 		return;
+	}
 
 	if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
 		hpet_rtc_int_freq = PIE_freq;
@@ -328,15 +335,10 @@ static void hpet_rtc_timer_reinit(void)
 		hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
 
 	/* It is more accurate to use the comparator value than current count.*/
-	cnt = hpet_readl(HPET_T1_CMP);
+	cnt = hpet_t1_cmp;
 	cnt += hpet_tick*HZ/hpet_rtc_int_freq;
 	hpet_writel(cnt, HPET_T1_CMP);
-
-	cfg = hpet_readl(HPET_T1_CFG);
-	cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
-	hpet_writel(cfg, HPET_T1_CFG);
-
-	return;
+	hpet_t1_cmp = cnt;
 }
 
 /*
diff --git a/arch/i386/kernel/timers/timer_hpet.c b/arch/i386/kernel/timers/timer_hpet.c
index d973a8b681fd..be242723c339 100644
--- a/arch/i386/kernel/timers/timer_hpet.c
+++ b/arch/i386/kernel/timers/timer_hpet.c
@@ -30,23 +30,28 @@ static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
  *  basic equation:
  *		ns = cycles / (freq / ns_per_sec)
  *		ns = cycles * (ns_per_sec / freq)
- *		ns = cycles * (10^9 / (cpu_mhz * 10^6))
- *		ns = cycles * (10^3 / cpu_mhz)
+ *		ns = cycles * (10^9 / (cpu_khz * 10^3))
+ *		ns = cycles * (10^6 / cpu_khz)
  *
  *	Then we use scaling math (suggested by george@mvista.com) to get:
- *		ns = cycles * (10^3 * SC / cpu_mhz) / SC
+ *		ns = cycles * (10^6 * SC / cpu_khz) / SC
  *		ns = cycles * cyc2ns_scale / SC
  *
  *	And since SC is a constant power of two, we can convert the div
  *  into a shift.
+ *
+ *  We can use khz divisor instead of mhz to keep a better percision, since
+ *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
+ *  (mathieu.desnoyers@polymtl.ca)
+ *
  *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
  */
 static unsigned long cyc2ns_scale;
 #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
 
-static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+static inline void set_cyc2ns_scale(unsigned long cpu_khz)
 {
-	cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+	cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
 }
 
 static inline unsigned long long cycles_2_ns(unsigned long long cyc)
@@ -163,7 +168,7 @@ static int __init init_hpet(char* override)
 				printk("Detected %u.%03u MHz processor.\n",
 					cpu_khz / 1000, cpu_khz % 1000);
 			}
-			set_cyc2ns_scale(cpu_khz/1000);
+			set_cyc2ns_scale(cpu_khz);
 		}
 		/* set this only when cpu_has_tsc */
 		timer_hpet.read_timer = read_timer_tsc;
diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
index 6dd470cc9f72..d395e3b42485 100644
--- a/arch/i386/kernel/timers/timer_tsc.c
+++ b/arch/i386/kernel/timers/timer_tsc.c
@@ -49,23 +49,28 @@ static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
  *  basic equation:
  *		ns = cycles / (freq / ns_per_sec)
  *		ns = cycles * (ns_per_sec / freq)
- *		ns = cycles * (10^9 / (cpu_mhz * 10^6))
- *		ns = cycles * (10^3 / cpu_mhz)
+ *		ns = cycles * (10^9 / (cpu_khz * 10^3))
+ *		ns = cycles * (10^6 / cpu_khz)
  *
  *	Then we use scaling math (suggested by george@mvista.com) to get:
- *		ns = cycles * (10^3 * SC / cpu_mhz) / SC
+ *		ns = cycles * (10^6 * SC / cpu_khz) / SC
  *		ns = cycles * cyc2ns_scale / SC
  *
  *	And since SC is a constant power of two, we can convert the div
- *  into a shift.   
+ *  into a shift.
+ *
+ *  We can use khz divisor instead of mhz to keep a better percision, since
+ *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
+ *  (mathieu.desnoyers@polymtl.ca)
+ *
  *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
  */
 static unsigned long cyc2ns_scale; 
 #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
 
-static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+static inline void set_cyc2ns_scale(unsigned long cpu_khz)
 {
-	cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+	cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
 }
 
 static inline unsigned long long cycles_2_ns(unsigned long long cyc)
@@ -286,7 +291,7 @@ time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 		if (use_tsc) {
 			if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
 				fast_gettimeoffset_quotient = cpufreq_scale(fast_gettimeoffset_ref, freq->new, ref_freq);
-				set_cyc2ns_scale(cpu_khz/1000);
+				set_cyc2ns_scale(cpu_khz);
 			}
 		}
 #endif
@@ -536,7 +541,7 @@ static int __init init_tsc(char* override)
 				printk("Detected %u.%03u MHz processor.\n",
 					cpu_khz / 1000, cpu_khz % 1000);
 			}
-			set_cyc2ns_scale(cpu_khz/1000);
+			set_cyc2ns_scale(cpu_khz);
 			return 0;
 		}
 	}
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index 19e90bdd84ea..c34d1bfc5161 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -488,6 +488,7 @@ fastcall void __kprobes do_general_protection(struct pt_regs * regs,
 				tss->io_bitmap_max - thread->io_bitmap_max);
 		tss->io_bitmap_max = thread->io_bitmap_max;
 		tss->io_bitmap_base = IO_BITMAP_OFFSET;
+		tss->io_bitmap_owner = thread;
 		put_cpu();
 		return;
 	}
diff --git a/arch/i386/kernel/vm86.c b/arch/i386/kernel/vm86.c
index 16b485009622..fc1993564f98 100644
--- a/arch/i386/kernel/vm86.c
+++ b/arch/i386/kernel/vm86.c
@@ -134,17 +134,16 @@ struct pt_regs * fastcall save_v86_state(struct kernel_vm86_regs * regs)
 	return ret;
 }
 
-static void mark_screen_rdonly(struct task_struct * tsk)
+static void mark_screen_rdonly(struct mm_struct *mm)
 {
 	pgd_t *pgd;
 	pud_t *pud;
 	pmd_t *pmd;
-	pte_t *pte, *mapped;
+	pte_t *pte;
+	spinlock_t *ptl;
 	int i;
 
-	preempt_disable();
-	spin_lock(&tsk->mm->page_table_lock);
-	pgd = pgd_offset(tsk->mm, 0xA0000);
+	pgd = pgd_offset(mm, 0xA0000);
 	if (pgd_none_or_clear_bad(pgd))
 		goto out;
 	pud = pud_offset(pgd, 0xA0000);
@@ -153,16 +152,14 @@ static void mark_screen_rdonly(struct task_struct * tsk)
 	pmd = pmd_offset(pud, 0xA0000);
 	if (pmd_none_or_clear_bad(pmd))
 		goto out;
-	pte = mapped = pte_offset_map(pmd, 0xA0000);
+	pte = pte_offset_map_lock(mm, pmd, 0xA0000, &ptl);
 	for (i = 0; i < 32; i++) {
 		if (pte_present(*pte))
 			set_pte(pte, pte_wrprotect(*pte));
 		pte++;
 	}
-	pte_unmap(mapped);
+	pte_unmap_unlock(pte, ptl);
 out:
-	spin_unlock(&tsk->mm->page_table_lock);
-	preempt_enable();
 	flush_tlb();
 }
 
@@ -306,7 +303,7 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk
 
 	tsk->thread.screen_bitmap = info->screen_bitmap;
 	if (info->flags & VM86_SCREEN_BITMAP)
-		mark_screen_rdonly(tsk);
+		mark_screen_rdonly(tsk->mm);
 	__asm__ __volatile__(
 		"xorl %%eax,%%eax; movl %%eax,%%fs; movl %%eax,%%gs\n\t"
 		"movl %0,%%esp\n\t"
diff --git a/arch/i386/mach-es7000/es7000.h b/arch/i386/mach-es7000/es7000.h
index 898ed905e119..f1e3204f5dec 100644
--- a/arch/i386/mach-es7000/es7000.h
+++ b/arch/i386/mach-es7000/es7000.h
@@ -24,6 +24,15 @@
  * http://www.unisys.com
  */
 
+/*
+ * ES7000 chipsets
+ */
+
+#define NON_UNISYS		0
+#define ES7000_CLASSIC		1
+#define ES7000_ZORRO		2
+
+
 #define	MIP_REG			1
 #define	MIP_PSAI_REG		4
 
@@ -106,6 +115,6 @@ struct mip_reg {
 
 extern int parse_unisys_oem (char *oemptr);
 extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
-extern void setup_unisys ();
+extern void setup_unisys(void);
 extern int es7000_start_cpu(int cpu, unsigned long eip);
 extern void es7000_sw_apic(void);
diff --git a/arch/i386/mach-es7000/es7000plat.c b/arch/i386/mach-es7000/es7000plat.c
index dc6660511b07..a9ab0644f403 100644
--- a/arch/i386/mach-es7000/es7000plat.c
+++ b/arch/i386/mach-es7000/es7000plat.c
@@ -62,6 +62,9 @@ static unsigned int base;
 static int
 es7000_rename_gsi(int ioapic, int gsi)
 {
+	if (es7000_plat == ES7000_ZORRO)
+		return gsi;
+
 	if (!base) {
 		int i;
 		for (i = 0; i < nr_ioapics; i++)
@@ -76,7 +79,7 @@ es7000_rename_gsi(int ioapic, int gsi)
 #endif	/* (CONFIG_X86_IO_APIC) && (CONFIG_ACPI) */
 
 void __init
-setup_unisys ()
+setup_unisys(void)
 {
 	/*
 	 * Determine the generation of the ES7000 currently running.
@@ -86,9 +89,9 @@ setup_unisys ()
 	 *
 	 */
 	if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2))
-		es7000_plat = 2;
+		es7000_plat = ES7000_ZORRO;
 	else
-		es7000_plat = 1;
+		es7000_plat = ES7000_CLASSIC;
 	ioapic_renumber_irq = es7000_rename_gsi;
 }
 
@@ -151,7 +154,7 @@ parse_unisys_oem (char *oemptr)
 	}
 
 	if (success < 2) {
-		es7000_plat = 0;
+		es7000_plat = NON_UNISYS;
 	} else
 		setup_unisys();
 	return es7000_plat;
diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c
index 244d8ec66be2..c4af9638dbfa 100644
--- a/arch/i386/mm/discontig.c
+++ b/arch/i386/mm/discontig.c
@@ -98,7 +98,7 @@ unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn,
 
 extern unsigned long find_max_low_pfn(void);
 extern void find_max_pfn(void);
-extern void one_highpage_init(struct page *, int, int);
+extern void add_one_highpage_init(struct page *, int, int);
 
 extern struct e820map e820;
 extern unsigned long init_pg_tables_end;
@@ -427,7 +427,7 @@ void __init set_highmem_pages_init(int bad_ppro)
 			if (!pfn_valid(node_pfn))
 				continue;
 			page = pfn_to_page(node_pfn);
-			one_highpage_init(page, node_pfn, bad_ppro);
+			add_one_highpage_init(page, node_pfn, bad_ppro);
 		}
 	}
 	totalram_pages += totalhigh_pages;
diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c
index 9edd4485b91e..cf572d9a3b6e 100644
--- a/arch/i386/mm/fault.c
+++ b/arch/i386/mm/fault.c
@@ -108,7 +108,7 @@ static inline unsigned long get_segment_eip(struct pt_regs *regs,
 		desc = (void *)desc + (seg & ~7);
 	} else {
 		/* Must disable preemption while reading the GDT. */
-		desc = (u32 *)&per_cpu(cpu_gdt_table, get_cpu());
+ 		desc = (u32 *)get_cpu_gdt_table(get_cpu());
 		desc = (void *)desc + (seg & ~7);
 	}
 
diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c
index 2ebaf75f732e..542d9298da5e 100644
--- a/arch/i386/mm/init.c
+++ b/arch/i386/mm/init.c
@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/proc_fs.h>
 #include <linux/efi.h>
+#include <linux/memory_hotplug.h>
 
 #include <asm/processor.h>
 #include <asm/system.h>
@@ -266,17 +267,46 @@ static void __init permanent_kmaps_init(pgd_t *pgd_base)
 	pkmap_page_table = pte;	
 }
 
-void __init one_highpage_init(struct page *page, int pfn, int bad_ppro)
+void __devinit free_new_highpage(struct page *page)
+{
+	set_page_count(page, 1);
+	__free_page(page);
+	totalhigh_pages++;
+}
+
+void __init add_one_highpage_init(struct page *page, int pfn, int bad_ppro)
 {
 	if (page_is_ram(pfn) && !(bad_ppro && page_kills_ppro(pfn))) {
 		ClearPageReserved(page);
-		set_page_count(page, 1);
-		__free_page(page);
-		totalhigh_pages++;
+		free_new_highpage(page);
 	} else
 		SetPageReserved(page);
 }
 
+static int add_one_highpage_hotplug(struct page *page, unsigned long pfn)
+{
+	free_new_highpage(page);
+	totalram_pages++;
+#ifdef CONFIG_FLATMEM
+	max_mapnr = max(pfn, max_mapnr);
+#endif
+	num_physpages++;
+	return 0;
+}
+
+/*
+ * Not currently handling the NUMA case.
+ * Assuming single node and all memory that
+ * has been added dynamically that would be
+ * onlined here is in HIGHMEM
+ */
+void online_page(struct page *page)
+{
+	ClearPageReserved(page);
+	add_one_highpage_hotplug(page, page_to_pfn(page));
+}
+
+
 #ifdef CONFIG_NUMA
 extern void set_highmem_pages_init(int);
 #else
@@ -284,7 +314,7 @@ static void __init set_highmem_pages_init(int bad_ppro)
 {
 	int pfn;
 	for (pfn = highstart_pfn; pfn < highend_pfn; pfn++)
-		one_highpage_init(pfn_to_page(pfn), pfn, bad_ppro);
+		add_one_highpage_init(pfn_to_page(pfn), pfn, bad_ppro);
 	totalram_pages += totalhigh_pages;
 }
 #endif /* CONFIG_FLATMEM */
@@ -615,6 +645,28 @@ void __init mem_init(void)
 #endif
 }
 
+/*
+ * this is for the non-NUMA, single node SMP system case.
+ * Specifically, in the case of x86, we will always add
+ * memory to the highmem for now.
+ */
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+int add_memory(u64 start, u64 size)
+{
+	struct pglist_data *pgdata = &contig_page_data;
+	struct zone *zone = pgdata->node_zones + MAX_NR_ZONES-1;
+	unsigned long start_pfn = start >> PAGE_SHIFT;
+	unsigned long nr_pages = size >> PAGE_SHIFT;
+
+	return __add_pages(zone, start_pfn, nr_pages);
+}
+
+int remove_memory(u64 start, u64 size)
+{
+	return -EINVAL;
+}
+#endif
+
 kmem_cache_t *pgd_cache;
 kmem_cache_t *pmd_cache;
 
diff --git a/arch/i386/mm/ioremap.c b/arch/i386/mm/ioremap.c
index f379b8d67558..5d09de8d1c6b 100644
--- a/arch/i386/mm/ioremap.c
+++ b/arch/i386/mm/ioremap.c
@@ -28,7 +28,7 @@ static int ioremap_pte_range(pmd_t *pmd, unsigned long addr,
 	unsigned long pfn;
 
 	pfn = phys_addr >> PAGE_SHIFT;
-	pte = pte_alloc_kernel(&init_mm, pmd, addr);
+	pte = pte_alloc_kernel(pmd, addr);
 	if (!pte)
 		return -ENOMEM;
 	do {
@@ -87,14 +87,12 @@ static int ioremap_page_range(unsigned long addr,
 	flush_cache_all();
 	phys_addr -= addr;
 	pgd = pgd_offset_k(addr);
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		next = pgd_addr_end(addr, end);
 		err = ioremap_pud_range(pgd, addr, next, phys_addr+addr, flags);
 		if (err)
 			break;
 	} while (pgd++, addr = next, addr != end);
-	spin_unlock(&init_mm.page_table_lock);
 	flush_tlb_all();
 	return err;
 }
diff --git a/arch/i386/mm/pgtable.c b/arch/i386/mm/pgtable.c
index dcdce2c6c532..9db3242103be 100644
--- a/arch/i386/mm/pgtable.c
+++ b/arch/i386/mm/pgtable.c
@@ -31,11 +31,13 @@ void show_mem(void)
 	pg_data_t *pgdat;
 	unsigned long i;
 	struct page_state ps;
+	unsigned long flags;
 
 	printk(KERN_INFO "Mem-info:\n");
 	show_free_areas();
 	printk(KERN_INFO "Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 	for_each_pgdat(pgdat) {
+		pgdat_resize_lock(pgdat, &flags);
 		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
 			page = pgdat_page_nr(pgdat, i);
 			total++;
@@ -48,6 +50,7 @@ void show_mem(void)
 			else if (page_count(page))
 				shared += page_count(page) - 1;
 		}
+		pgdat_resize_unlock(pgdat, &flags);
 	}
 	printk(KERN_INFO "%d pages of RAM\n", total);
 	printk(KERN_INFO "%d pages of HIGHMEM\n", highmem);
@@ -188,19 +191,19 @@ static inline void pgd_list_add(pgd_t *pgd)
 	struct page *page = virt_to_page(pgd);
 	page->index = (unsigned long)pgd_list;
 	if (pgd_list)
-		pgd_list->private = (unsigned long)&page->index;
+		set_page_private(pgd_list, (unsigned long)&page->index);
 	pgd_list = page;
-	page->private = (unsigned long)&pgd_list;
+	set_page_private(page, (unsigned long)&pgd_list);
 }
 
 static inline void pgd_list_del(pgd_t *pgd)
 {
 	struct page *next, **pprev, *page = virt_to_page(pgd);
 	next = (struct page *)page->index;
-	pprev = (struct page **)page->private;
+	pprev = (struct page **)page_private(page);
 	*pprev = next;
 	if (next)
-		next->private = (unsigned long)pprev;
+		set_page_private(next, (unsigned long)pprev);
 }
 
 void pgd_ctor(void *pgd, kmem_cache_t *cache, unsigned long unused)
diff --git a/arch/i386/oprofile/backtrace.c b/arch/i386/oprofile/backtrace.c
index 65dfd2edb671..21654be3f73f 100644
--- a/arch/i386/oprofile/backtrace.c
+++ b/arch/i386/oprofile/backtrace.c
@@ -12,6 +12,7 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <asm/ptrace.h>
+#include <asm/uaccess.h>
 
 struct frame_head {
 	struct frame_head * ebp;
@@ -21,26 +22,22 @@ struct frame_head {
 static struct frame_head *
 dump_backtrace(struct frame_head * head)
 {
-	oprofile_add_trace(head->ret);
+	struct frame_head bufhead[2];
 
-	/* frame pointers should strictly progress back up the stack
-	 * (towards higher addresses) */
-	if (head >= head->ebp)
+	/* Also check accessibility of one struct frame_head beyond */
+	if (!access_ok(VERIFY_READ, head, sizeof(bufhead)))
+		return NULL;
+	if (__copy_from_user_inatomic(bufhead, head, sizeof(bufhead)))
 		return NULL;
 
-	return head->ebp;
-}
-
-/* check that the page(s) containing the frame head are present */
-static int pages_present(struct frame_head * head)
-{
-	struct mm_struct * mm = current->mm;
+	oprofile_add_trace(bufhead[0].ret);
 
-	/* FIXME: only necessary once per page */
-	if (!check_user_page_readable(mm, (unsigned long)head))
-		return 0;
+	/* frame pointers should strictly progress back up the stack
+	 * (towards higher addresses) */
+	if (head >= bufhead[0].ebp)
+		return NULL;
 
-	return check_user_page_readable(mm, (unsigned long)(head + 1));
+	return bufhead[0].ebp;
 }
 
 /*
@@ -97,15 +94,6 @@ x86_backtrace(struct pt_regs * const regs, unsigned int depth)
 		return;
 	}
 
-#ifdef CONFIG_SMP
-	if (!spin_trylock(&current->mm->page_table_lock))
-		return;
-#endif
-
-	while (depth-- && head && pages_present(head))
+	while (depth-- && head)
 		head = dump_backtrace(head);
-
-#ifdef CONFIG_SMP
-	spin_unlock(&current->mm->page_table_lock);
-#endif
 }
diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c
index 8e8e895e1b5a..330fd2b68075 100644
--- a/arch/i386/pci/fixup.c
+++ b/arch/i386/pci/fixup.c
@@ -2,6 +2,8 @@
  * Exceptions for specific devices. Usually work-arounds for fatal design flaws.
  */
 
+#include <linux/delay.h>
+#include <linux/dmi.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include "pci.h"
@@ -384,3 +386,60 @@ static void __devinit pci_fixup_video(struct pci_dev *pdev)
 	}
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
+
+/*
+ * Some Toshiba laptops need extra code to enable their TI TSB43AB22/A.
+ *
+ * We pretend to bring them out of full D3 state, and restore the proper
+ * IRQ, PCI cache line size, and BARs, otherwise the device won't function
+ * properly.  In some cases, the device will generate an interrupt on
+ * the wrong IRQ line, causing any devices sharing the the line it's
+ * *supposed* to use to be disabled by the kernel's IRQ debug code.
+ */
+static u16 toshiba_line_size;
+
+static struct dmi_system_id __devinit toshiba_ohci1394_dmi_table[] = {
+	{
+		.ident = "Toshiba PS5 based laptop",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "PS5"),
+		},
+	},
+	{
+		.ident = "Toshiba PSM4 based laptop",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "PSM4"),
+		},
+	},
+	{ }
+};
+
+static void __devinit pci_pre_fixup_toshiba_ohci1394(struct pci_dev *dev)
+{
+	if (!dmi_check_system(toshiba_ohci1394_dmi_table))
+		return; /* only applies to certain Toshibas (so far) */
+
+	dev->current_state = PCI_D3cold;
+	pci_read_config_word(dev, PCI_CACHE_LINE_SIZE, &toshiba_line_size);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0x8032,
+			 pci_pre_fixup_toshiba_ohci1394);
+
+static void __devinit pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev)
+{
+	if (!dmi_check_system(toshiba_ohci1394_dmi_table))
+		return; /* only applies to certain Toshibas (so far) */
+
+	/* Restore config space on Toshiba laptops */
+	mdelay(10);
+	pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, toshiba_line_size);
+	pci_write_config_word(dev, PCI_INTERRUPT_LINE, dev->irq);
+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
+			       pci_resource_start(dev, 0));
+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_1,
+			       pci_resource_start(dev, 1));
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_TI, 0x8032,
+			 pci_post_fixup_toshiba_ohci1394);
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
index cddafe33ff7c..19e6f4871d1e 100644
--- a/arch/i386/pci/irq.c
+++ b/arch/i386/pci/irq.c
@@ -547,31 +547,48 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route
 	return 0;
 }
 
-static __init int via_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+static __init int via_router_probe(struct irq_router *r,
+				struct pci_dev *router, u16 device)
 {
 	/* FIXME: We should move some of the quirk fixup stuff here */
 
-	if (router->device == PCI_DEVICE_ID_VIA_82C686 &&
-			device == PCI_DEVICE_ID_VIA_82C586_0) {
-		/* Asus k7m bios wrongly reports 82C686A as 586-compatible */
-		device = PCI_DEVICE_ID_VIA_82C686;
+	/*
+	 * work arounds for some buggy BIOSes
+	 */
+	if (device == PCI_DEVICE_ID_VIA_82C586_0) {
+		switch(router->device) {
+		case PCI_DEVICE_ID_VIA_82C686:
+			/*
+			 * Asus k7m bios wrongly reports 82C686A
+			 * as 586-compatible
+			 */
+			device = PCI_DEVICE_ID_VIA_82C686;
+			break;
+		case PCI_DEVICE_ID_VIA_8235:
+			/**
+			 * Asus a7v-x bios wrongly reports 8235
+			 * as 586-compatible
+			 */
+			device = PCI_DEVICE_ID_VIA_8235;
+			break;
+		}
 	}
 
-	switch(device)
-	{
-		case PCI_DEVICE_ID_VIA_82C586_0:
-			r->name = "VIA";
-			r->get = pirq_via586_get;
-			r->set = pirq_via586_set;
-			return 1;
-		case PCI_DEVICE_ID_VIA_82C596:
-		case PCI_DEVICE_ID_VIA_82C686:
-		case PCI_DEVICE_ID_VIA_8231:
+	switch(device) {
+	case PCI_DEVICE_ID_VIA_82C586_0:
+		r->name = "VIA";
+		r->get = pirq_via586_get;
+		r->set = pirq_via586_set;
+		return 1;
+	case PCI_DEVICE_ID_VIA_82C596:
+	case PCI_DEVICE_ID_VIA_82C686:
+	case PCI_DEVICE_ID_VIA_8231:
+	case PCI_DEVICE_ID_VIA_8235:
 		/* FIXME: add new ones for 8233/5 */
-			r->name = "VIA";
-			r->get = pirq_via_get;
-			r->set = pirq_via_set;
-			return 1;
+		r->name = "VIA";
+		r->get = pirq_via_get;
+		r->set = pirq_via_set;
+		return 1;
 	}
 	return 0;
 }
diff --git a/arch/i386/power/cpu.c b/arch/i386/power/cpu.c
index b27c5acc79d0..1f1572692e0b 100644
--- a/arch/i386/power/cpu.c
+++ b/arch/i386/power/cpu.c
@@ -51,16 +51,14 @@ void save_processor_state(void)
 	__save_processor_state(&saved_context);
 }
 
-static void
-do_fpu_end(void)
+static void do_fpu_end(void)
 {
-        /* restore FPU regs if necessary */
-	/* Do it out of line so that gcc does not move cr0 load to some stupid place */
-        kernel_fpu_end();
-	mxcsr_feature_mask_init();
+	/*
+	 * Restore FPU regs if necessary.
+	 */
+	kernel_fpu_end();
 }
 
-
 static void fix_processor_context(void)
 {
 	int cpu = smp_processor_id();
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 945c15a0722b..1642375fb14e 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -63,8 +63,6 @@ config IA64_GENERIC
 	select ACPI
 	select NUMA
 	select ACPI_NUMA
-	select VIRTUAL_MEM_MAP
-	select DISCONTIGMEM
 	help
 	  This selects the system type of your hardware.  A "generic" kernel
 	  will run on any supported IA-64 system.  However, if you configure
@@ -176,40 +174,6 @@ config IA64_L1_CACHE_SHIFT
 	default "6" if ITANIUM
 
 # align cache-sensitive data to 64 bytes
-config NUMA
-	bool "NUMA support"
-	depends on !IA64_HP_SIM
-	default y if IA64_SGI_SN2
-	select ACPI_NUMA
-	help
-	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
-	  Access).  This option is for configuring high-end multiprocessor
-	  server systems.  If in doubt, say N.
-
-config VIRTUAL_MEM_MAP
-	bool "Virtual mem map"
-	default y if !IA64_HP_SIM
-	help
-	  Say Y to compile the kernel with support for a virtual mem map.
-	  This code also only takes effect if a memory hole of greater than
-	  1 Gb is found during boot.  You must turn this option on if you
-	  require the DISCONTIGMEM option for your machine. If you are
-	  unsure, say Y.
-
-config HOLES_IN_ZONE
-	bool
-	default y if VIRTUAL_MEM_MAP
-
-config ARCH_DISCONTIGMEM_ENABLE
-	bool "Discontiguous memory support"
-	depends on (IA64_DIG || IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) && NUMA && VIRTUAL_MEM_MAP
-	default y if (IA64_SGI_SN2 || IA64_GENERIC) && NUMA
-	help
-	  Say Y to support efficient handling of discontiguous physical memory,
-	  for architectures which are either NUMA (Non-Uniform Memory Access)
-	  or have huge holes in the physical address space for other reasons.
-	  See <file:Documentation/vm/numa> for more.
-
 config IA64_CYCLONE
 	bool "Cyclone (EXA) Time Source support"
 	help
@@ -232,8 +196,10 @@ config IA64_SGI_SN_XP
 	  based on a network adapter and DMA messaging.
 
 config FORCE_MAX_ZONEORDER
-	int
-	default "18"
+	int "MAX_ORDER (11 - 17)"  if !HUGETLB_PAGE
+	range 11 17  if !HUGETLB_PAGE
+	default "17" if HUGETLB_PAGE
+	default "11"
 
 config SMP
 	bool "Symmetric multi-processing support"
@@ -254,8 +220,8 @@ config SMP
 	  If you don't know what to do here, say N.
 
 config NR_CPUS
-	int "Maximum number of CPUs (2-512)"
-	range 2 512
+	int "Maximum number of CPUs (2-1024)"
+	range 2 1024
 	depends on SMP
 	default "64"
 	help
@@ -298,6 +264,58 @@ config PREEMPT
 
 source "mm/Kconfig"
 
+config ARCH_SELECT_MEMORY_MODEL
+	def_bool y
+
+config ARCH_DISCONTIGMEM_ENABLE
+	def_bool y
+	help
+	  Say Y to support efficient handling of discontiguous physical memory,
+	  for architectures which are either NUMA (Non-Uniform Memory Access)
+	  or have huge holes in the physical address space for other reasons.
+ 	  See <file:Documentation/vm/numa> for more.
+
+config ARCH_FLATMEM_ENABLE
+	def_bool y
+
+config ARCH_SPARSEMEM_ENABLE
+	def_bool y
+	depends on ARCH_DISCONTIGMEM_ENABLE
+
+config ARCH_DISCONTIGMEM_DEFAULT
+	def_bool y if (IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB)
+	depends on ARCH_DISCONTIGMEM_ENABLE
+
+config NUMA
+	bool "NUMA support"
+	depends on !IA64_HP_SIM && !FLATMEM
+	default y if IA64_SGI_SN2
+	help
+	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+	  Access).  This option is for configuring high-end multiprocessor
+	  server systems.  If in doubt, say N.
+
+# VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent.
+# VIRTUAL_MEM_MAP has been retained for historical reasons.
+config VIRTUAL_MEM_MAP
+	bool "Virtual mem map"
+	depends on !SPARSEMEM
+	default y if !IA64_HP_SIM
+	help
+	  Say Y to compile the kernel with support for a virtual mem map.
+	  This code also only takes effect if a memory hole of greater than
+	  1 Gb is found during boot.  You must turn this option on if you
+	  require the DISCONTIGMEM option for your machine. If you are
+	  unsure, say Y.
+
+config HOLES_IN_ZONE
+	bool
+	default y if VIRTUAL_MEM_MAP
+
+config HAVE_ARCH_EARLY_PFN_TO_NID
+	def_bool y
+	depends on NEED_MULTIPLE_NODES
+
 config IA32_SUPPORT
 	bool "Support for Linux/x86 binaries"
 	help
diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig
index 3b65cbb31b1d..b40672bb3ab0 100644
--- a/arch/ia64/configs/bigsur_defconfig
+++ b/arch/ia64/configs/bigsur_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc2
-# Mon Nov 29 13:27:48 2004
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:18:49 2005
 #
 
 #
@@ -10,34 +10,40 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -58,12 +64,15 @@ CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_IA64_GENERIC is not set
 CONFIG_IA64_DIG=y
 # CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
 # CONFIG_IA64_SGI_SN2 is not set
 # CONFIG_IA64_HP_SIM is not set
 CONFIG_ITANIUM=y
@@ -72,17 +81,30 @@ CONFIG_ITANIUM=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
 CONFIG_IA64_BRL_EMU=y
 CONFIG_IA64_L1_CACHE_SHIFT=6
 # CONFIG_NUMA is not set
 # CONFIG_VIRTUAL_MEM_MAP is not set
 # CONFIG_IA64_CYCLONE is not set
 CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
 CONFIG_FORCE_MAX_ZONEORDER=18
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 # CONFIG_HOTPLUG_CPU is not set
+# CONFIG_SCHED_SMT is not set
 CONFIG_PREEMPT=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
@@ -95,6 +117,7 @@ CONFIG_IA64_PALINFO=y
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
@@ -102,18 +125,26 @@ CONFIG_BINFMT_MISC=m
 # Power management and ACPI
 #
 CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
 
 #
 # ACPI (Advanced Configuration and Power Interface) Support
 #
+CONFIG_ACPI=y
 CONFIG_ACPI_BUTTON=m
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
+# CONFIG_ACPI_CONTAINER is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
 
 #
 # Bus options (PCI, PCMCIA)
@@ -122,7 +153,7 @@ CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCI Hotplug Support
@@ -135,8 +166,70 @@ CONFIG_PCI_NAMES=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
 #
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -151,6 +244,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -163,7 +261,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
 
 #
 # Block devices
@@ -172,14 +276,15 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -189,6 +294,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -211,7 +317,8 @@ CONFIG_BLK_DEV_IDEFLOPPY=m
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=m
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
 CONFIG_BLK_DEV_IDEPCI=y
 CONFIG_IDEPCI_SHARE_IRQ=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
@@ -233,6 +340,7 @@ CONFIG_IDEDMA_PCI_AUTO=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 CONFIG_BLK_DEV_PIIX=m
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -250,6 +358,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -261,6 +370,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -274,6 +384,8 @@ CONFIG_SCSI_LOGGING=y
 #
 CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -288,18 +400,13 @@ CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_QLOGIC_1280_1040 is not set
@@ -309,7 +416,8 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -332,11 +440,14 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
 
 #
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -349,72 +460,14 @@ CONFIG_DM_ZERO=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
 
 #
 # ARCnet devices
@@ -422,6 +475,11 @@ CONFIG_DUMMY=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -443,7 +501,6 @@ CONFIG_NET_PCI=y
 # CONFIG_FORCEDETH is not set
 # CONFIG_DGRS is not set
 CONFIG_EEPRO100=y
-# CONFIG_EEPRO100_PIO is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -465,13 +522,17 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -496,6 +557,8 @@ CONFIG_EEPRO100=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -525,18 +588,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -554,6 +605,17 @@ CONFIG_MOUSE_PS2=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -571,7 +633,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -579,6 +640,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -603,14 +665,22 @@ CONFIG_EFI_RTC=y
 #
 CONFIG_AGP=m
 CONFIG_AGP_I460=m
-CONFIG_DRM=y
+CONFIG_DRM=m
 # CONFIG_DRM_TDFX is not set
 CONFIG_DRM_R128=m
 # CONFIG_DRM_RADEON is not set
 # CONFIG_DRM_MGA is not set
 # CONFIG_DRM_SIS is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_HPET is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
 
 #
 # I2C support
@@ -635,7 +705,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
-# CONFIG_I2C_ISA is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -651,16 +721,43 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_PCA_ISA is not set
 
 #
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
 #
-# CONFIG_I2C_SENSOR is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM75 is not set
@@ -671,33 +768,26 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
+# Misc devices
 #
-# CONFIG_W1 is not set
 
 #
-# Misc devices
+# Multimedia Capabilities Port drivers
 #
 
 #
@@ -752,11 +842,12 @@ CONFIG_SND_OPL3_LIB=m
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
 
 #
 # PCI devices
 #
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -768,6 +859,8 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_CS46XX is not set
 CONFIG_SND_CS4281=m
 # CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
 # CONFIG_SND_KORG1212 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -775,9 +868,10 @@ CONFIG_SND_CS4281=m
 # CONFIG_SND_RME96 is not set
 # CONFIG_SND_RME9652 is not set
 # CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
@@ -791,13 +885,14 @@ CONFIG_SND_CS4281=m
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_SONICVIBES is not set
 # CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
 
 #
 # USB devices
 #
 # CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
 
 #
 # Open Sound System
@@ -807,6 +902,8 @@ CONFIG_SND_CS4281=m
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
 
@@ -818,35 +915,38 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
 
 #
 # USB Device Class drivers
 #
-CONFIG_USB_AUDIO=m
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 CONFIG_USB_BLUETOOTH_TTY=m
-CONFIG_USB_MIDI=m
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 
 #
 # USB Input Devices
@@ -863,19 +963,23 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_MOUSE is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
 
 #
 # USB Multimedia devices
@@ -894,6 +998,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -909,7 +1014,6 @@ CONFIG_USB_HIDDEV=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
@@ -918,10 +1022,12 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -930,10 +1036,25 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_GADGET is not set
 
 #
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -945,17 +1066,20 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=y
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -982,14 +1106,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1013,15 +1134,18 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
@@ -1031,9 +1155,11 @@ CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1103,8 +1229,12 @@ CONFIG_NLS_UTF8=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
 
 #
 # Profiling support
@@ -1115,14 +1245,20 @@ CONFIG_OPROFILE=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
 # CONFIG_IA64_GRANULE_16MB is not set
 CONFIG_IA64_GRANULE_64MB=y
 # CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1149,6 +1285,7 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
@@ -1164,3 +1301,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig
new file mode 100644
index 000000000000..80f8663bc6d9
--- /dev/null
+++ b/arch/ia64/configs/gensparse_defconfig
@@ -0,0 +1,1319 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Wed Sep 28 08:27:29 2005
+#
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Processor type and features
+#
+CONFIG_IA64=y
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_INTERPOLATION=y
+CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_IA64_GENERIC=y
+# CONFIG_IA64_DIG is not set
+# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
+# CONFIG_IA64_SGI_SN2 is not set
+# CONFIG_IA64_HP_SIM is not set
+# CONFIG_ITANIUM is not set
+CONFIG_MCKINLEY=y
+# CONFIG_IA64_PAGE_SIZE_4KB is not set
+# CONFIG_IA64_PAGE_SIZE_8KB is not set
+CONFIG_IA64_PAGE_SIZE_16KB=y
+# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_IA64_L1_CACHE_SHIFT=7
+CONFIG_IA64_CYCLONE=y
+CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
+CONFIG_FORCE_MAX_ZONEORDER=17
+CONFIG_SMP=y
+CONFIG_NR_CPUS=512
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_SCHED_SMT is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_NUMA=y
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
+CONFIG_IA32_SUPPORT=y
+CONFIG_COMPAT=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+
+#
+# Firmware Drivers
+#
+CONFIG_EFI_VARS=y
+CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management and ACPI
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+CONFIG_ACPI=y
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_NUMA=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_SYSTEM=y
+CONFIG_ACPI_CONTAINER=m
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options (PCI, PCMCIA)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCI Hotplug Support
+#
+CONFIG_HOTPLUG_PCI=m
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+CONFIG_HOTPLUG_PCI_ACPI=m
+# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HOTPLUG_PCI_SGI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=y
+CONFIG_BLK_DEV_IDESCSI=m
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+CONFIG_BLK_DEV_SGIIOC4=y
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+CONFIG_SCSI_SATA=y
+# CONFIG_SCSI_SATA_AHCI is not set
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
+# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIS is not set
+# CONFIG_SCSI_SATA_ULI is not set
+# CONFIG_SCSI_SATA_VIA is not set
+CONFIG_SCSI_SATA_VITESSE=y
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+CONFIG_SCSI_QLOGIC_1280=y
+# CONFIG_SCSI_QLOGIC_1280_1040 is not set
+CONFIG_SCSI_QLA2XXX=y
+CONFIG_SCSI_QLA21XX=m
+CONFIG_SCSI_QLA22XX=m
+CONFIG_SCSI_QLA2300=m
+CONFIG_SCSI_QLA2322=m
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_EMC is not set
+
+#
+# Fusion MPT device support
+#
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_MAX_SGE=128
+# CONFIG_FUSION_CTL is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+CONFIG_EEPRO100=m
+CONFIG_E100=m
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+CONFIG_GAMEPORT=m
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
+# CONFIG_GAMEPORT_EMU10K1 is not set
+# CONFIG_GAMEPORT_FM801 is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_STALDRV is not set
+CONFIG_SGI_SNSC=y
+CONFIG_SGI_TIOCX=y
+CONFIG_SGI_MBCS=m
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_ACPI=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_SGI_L1_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_SGI_IOC4=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+CONFIG_AGP=m
+CONFIG_AGP_I460=m
+CONFIG_AGP_HP_ZX1=m
+CONFIG_AGP_SGI_TIOCA=m
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
+CONFIG_RAW_DRIVER=m
+CONFIG_HPET=y
+# CONFIG_HPET_RTC_IRQ is not set
+CONFIG_HPET_MMAP=y
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+CONFIG_MMTIMER=y
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
+
+#
+# Generic devices
+#
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS4281=m
+CONFIG_SND_EMU10K1=m
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+CONFIG_SND_FM801=m
+# CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+CONFIG_INFINIBAND=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_MTHCA=m
+# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+
+#
+# SN Devices
+#
+CONFIG_SGI_IOC4=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=y
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+
+#
+# HP Simulator drivers
+#
+# CONFIG_HP_SIMETH is not set
+# CONFIG_HP_SIMSERIAL is not set
+# CONFIG_HP_SIMSCSI is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
+CONFIG_IA64_GRANULE_16MB=y
+# CONFIG_IA64_GRANULE_64MB is not set
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index d452e18ac494..9bc8bcafc905 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6-tiger-smp
-# Wed Aug 17 10:19:51 2005
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:17:57 2005
 #
 
 #
@@ -16,6 +16,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -27,6 +28,7 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
@@ -103,6 +105,7 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
@@ -115,6 +118,7 @@ CONFIG_IA64_PALINFO=y
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
@@ -122,20 +126,27 @@ CONFIG_BINFMT_MISC=m
 # Power management and ACPI
 #
 CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
 
 #
 # ACPI (Advanced Configuration and Power Interface) Support
 #
+CONFIG_ACPI=y
 CONFIG_ACPI_BUTTON=m
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
-# CONFIG_ACPI_HOTPLUG_CPU is not set
+CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
-# CONFIG_ACPI_CONTAINER is not set
+CONFIG_ACPI_CONTAINER=m
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
 
 #
 # Bus options (PCI, PCMCIA)
@@ -144,7 +155,6 @@ CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -188,14 +198,19 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -218,9 +233,11 @@ CONFIG_TCP_CONG_BIC=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -235,6 +252,11 @@ CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -247,7 +269,13 @@ CONFIG_FW_LOADER=m
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
 
 #
 # Block devices
@@ -266,7 +294,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -299,7 +326,8 @@ CONFIG_BLK_DEV_IDESCSI=m
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
 CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_IDEPCI_SHARE_IRQ is not set
 # CONFIG_BLK_DEV_OFFBOARD is not set
@@ -339,6 +367,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -366,6 +395,7 @@ CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -454,6 +484,7 @@ CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
 
 #
 # ARCnet devices
@@ -461,6 +492,11 @@ CONFIG_DUMMY=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -481,6 +517,7 @@ CONFIG_TULIP=m
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
@@ -512,6 +549,7 @@ CONFIG_E1000=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -521,6 +559,7 @@ CONFIG_TIGON3=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -618,6 +657,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
@@ -675,6 +715,7 @@ CONFIG_DRM_RADEON=m
 CONFIG_DRM_MGA=m
 CONFIG_DRM_SIS=m
 # CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
@@ -691,7 +732,6 @@ CONFIG_MAX_RAW_DEVS=256
 # I2C support
 #
 # CONFIG_I2C is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Dallas's 1-wire bus
@@ -702,6 +742,7 @@ CONFIG_MAX_RAW_DEVS=256
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -709,6 +750,10 @@ CONFIG_HWMON=y
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -800,9 +845,11 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_MTOUCH is not set
 # CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -902,16 +949,12 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=y
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -919,6 +962,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -947,13 +991,11 @@ CONFIG_NTFS_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1003,6 +1045,7 @@ CONFIG_CIFS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1072,10 +1115,12 @@ CONFIG_NLS_UTF8=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
 
 #
 # Profiling support
@@ -1089,6 +1134,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=20
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 80b0e9eb7fb3..0856ca67dd50 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Wed Aug 17 10:02:43 2005
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:15:01 2005
 #
 
 #
@@ -18,6 +18,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -29,6 +30,7 @@ CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -103,6 +105,7 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
@@ -115,6 +118,7 @@ CONFIG_IA64_PALINFO=y
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 
@@ -122,28 +126,34 @@ CONFIG_BINFMT_MISC=y
 # Power management and ACPI
 #
 CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
 
 #
 # ACPI (Advanced Configuration and Power Interface) Support
 #
+CONFIG_ACPI=y
 CONFIG_ACPI_BUTTON=y
 CONFIG_ACPI_FAN=y
 CONFIG_ACPI_PROCESSOR=y
 CONFIG_ACPI_THERMAL=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 # CONFIG_ACPI_CONTAINER is not set
 
 #
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
 # Bus options (PCI, PCMCIA)
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -187,8 +197,8 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 
@@ -204,7 +214,6 @@ CONFIG_NETFILTER=y
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 CONFIG_IP_NF_ARPTABLES=y
@@ -212,6 +221,11 @@ CONFIG_IP_NF_ARPTABLES=y
 # CONFIG_IP_NF_ARP_MANGLE is not set
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -234,9 +248,11 @@ CONFIG_IP_NF_ARPTABLES=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -251,6 +267,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -263,7 +284,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
 
 #
 # Block devices
@@ -282,7 +309,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -315,7 +341,8 @@ CONFIG_BLK_DEV_IDECD=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
 CONFIG_BLK_DEV_IDEPCI=y
 CONFIG_IDEPCI_SHARE_IRQ=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
@@ -354,6 +381,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -381,6 +409,7 @@ CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -457,6 +486,7 @@ CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
 
 #
 # ARCnet devices
@@ -464,6 +494,11 @@ CONFIG_DUMMY=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -485,6 +520,7 @@ CONFIG_TULIP_NAPI_HW_MITIGATION=y
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
@@ -516,6 +552,7 @@ CONFIG_E1000=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -525,6 +562,7 @@ CONFIG_TIGON3=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -650,12 +688,12 @@ CONFIG_AGP=y
 CONFIG_AGP_HP_ZX1=y
 CONFIG_DRM=y
 # CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_GAMMA is not set
 # CONFIG_DRM_R128 is not set
 CONFIG_DRM_RADEON=y
 # CONFIG_DRM_MGA is not set
 # CONFIG_DRM_SIS is not set
 # CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_HPET is not set
 # CONFIG_HANGCHECK_TIMER is not set
@@ -689,7 +727,6 @@ CONFIG_I2C_ALGOPCF=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -703,7 +740,6 @@ CONFIG_I2C_ALGOPCF=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -730,12 +766,17 @@ CONFIG_I2C_ALGOPCF=y
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 CONFIG_VIDEO_DEV=y
@@ -806,6 +847,7 @@ CONFIG_FB_RADEON_DEBUG=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_PM3 is not set
 # CONFIG_FB_S1D13XXX is not set
@@ -862,11 +904,12 @@ CONFIG_SND_OPL3_LIB=y
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
 
 #
 # PCI devices
 #
-CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -890,7 +933,7 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_HDSPM is not set
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
@@ -952,9 +995,8 @@ CONFIG_USB_UHCI_HCD=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
@@ -971,6 +1013,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 
 #
 # USB Input Devices
@@ -987,9 +1030,11 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_MTOUCH is not set
 # CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -1088,10 +1133,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1100,6 +1141,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1126,13 +1168,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1177,6 +1217,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1246,10 +1287,12 @@ CONFIG_NLS_UTF8=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
 
 #
 # Profiling support
@@ -1263,6 +1306,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig
index 5da208115ea1..6e3f147e03e5 100644
--- a/arch/ia64/defconfig
+++ b/arch/ia64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12
-# Tue Jun 21 11:30:42 2005
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:13:03 2005
 #
 
 #
@@ -16,6 +16,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -27,6 +28,7 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
@@ -80,6 +82,10 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
 CONFIG_NUMA=y
 CONFIG_VIRTUAL_MEM_MAP=y
@@ -87,12 +93,21 @@ CONFIG_HOLES_IN_ZONE=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_IA64_CYCLONE=y
 CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
 CONFIG_FORCE_MAX_ZONEORDER=18
 CONFIG_SMP=y
 CONFIG_NR_CPUS=512
 CONFIG_HOTPLUG_CPU=y
 # CONFIG_SCHED_SMT is not set
 # CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
@@ -105,6 +120,7 @@ CONFIG_IA64_PALINFO=y
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
@@ -112,30 +128,36 @@ CONFIG_BINFMT_MISC=m
 # Power management and ACPI
 #
 CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
 
 #
 # ACPI (Advanced Configuration and Power Interface) Support
 #
+CONFIG_ACPI=y
 CONFIG_ACPI_BUTTON=m
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=m
 CONFIG_ACPI_NUMA=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_ACPI_CONTAINER=m
 
 #
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
 # Bus options (PCI, PCMCIA)
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -147,6 +169,7 @@ CONFIG_HOTPLUG_PCI_ACPI=m
 # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
 # CONFIG_HOTPLUG_PCI_CPCI is not set
 # CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HOTPLUG_PCI_SGI is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -154,6 +177,73 @@ CONFIG_HOTPLUG_PCI_ACPI=m
 # CONFIG_PCCARD is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
@@ -162,10 +252,15 @@ CONFIG_HOTPLUG_PCI_ACPI=m
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -178,7 +273,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
 
 #
 # Block devices
@@ -197,7 +298,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -230,7 +330,8 @@ CONFIG_BLK_DEV_IDESCSI=m
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
 CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_IDEPCI_SHARE_IRQ is not set
 # CONFIG_BLK_DEV_OFFBOARD is not set
@@ -252,6 +353,7 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -270,6 +372,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -297,6 +400,7 @@ CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -314,6 +418,7 @@ CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_AHCI is not set
 # CONFIG_SCSI_SATA_SVW is not set
 # CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
 # CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
@@ -335,7 +440,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
 CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_QLOGIC_1280_1040 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -344,6 +448,7 @@ CONFIG_SCSI_QLA22XX=m
 CONFIG_SCSI_QLA2300=m
 CONFIG_SCSI_QLA2322=m
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -390,74 +495,14 @@ CONFIG_FUSION_MAX_SGE=128
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
+# Network device support
 #
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
 
 #
 # ARCnet devices
@@ -465,6 +510,11 @@ CONFIG_DUMMY=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -485,6 +535,7 @@ CONFIG_TULIP=m
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
@@ -516,6 +567,7 @@ CONFIG_E1000=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -525,6 +577,7 @@ CONFIG_TIGON3=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -549,6 +602,10 @@ CONFIG_TIGON3=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 
 #
 # ISDN subsystem
@@ -607,9 +664,7 @@ CONFIG_GAMEPORT=m
 # CONFIG_GAMEPORT_NS558 is not set
 # CONFIG_GAMEPORT_L4 is not set
 # CONFIG_GAMEPORT_EMU10K1 is not set
-# CONFIG_GAMEPORT_VORTEX is not set
 # CONFIG_GAMEPORT_FM801 is not set
-# CONFIG_GAMEPORT_CS461X is not set
 
 #
 # Character devices
@@ -620,6 +675,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
@@ -641,7 +697,6 @@ CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -650,8 +705,8 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_SGI_L1_CONSOLE=y
-CONFIG_SERIAL_SGI_IOC4=y
 # CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_SGI_IOC4=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -684,6 +739,8 @@ CONFIG_DRM_R128=m
 CONFIG_DRM_RADEON=m
 CONFIG_DRM_MGA=m
 CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
@@ -708,10 +765,21 @@ CONFIG_MMTIMER=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -753,6 +821,7 @@ CONFIG_SND_PCM_OSS=m
 CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
 
 #
 # Generic devices
@@ -764,11 +833,12 @@ CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 CONFIG_SND_SERIAL_U16550=m
 CONFIG_SND_MPU401=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
 
 #
 # PCI devices
 #
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -790,9 +860,10 @@ CONFIG_SND_EMU10K1=m
 # CONFIG_SND_RME96 is not set
 # CONFIG_SND_RME9652 is not set
 # CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
@@ -844,6 +915,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -853,9 +925,8 @@ CONFIG_USB_UHCI_HCD=m
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
@@ -888,12 +959,17 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_MOUSE is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -918,7 +994,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=m
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -944,10 +1020,11 @@ CONFIG_USB_MON=m
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -964,6 +1041,8 @@ CONFIG_USB_MON=m
 # InfiniBand support
 #
 CONFIG_INFINIBAND=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
 CONFIG_INFINIBAND_MTHCA=m
 # CONFIG_INFINIBAND_MTHCA_DEBUG is not set
 CONFIG_INFINIBAND_IPOIB=m
@@ -981,6 +1060,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -996,22 +1076,20 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=y
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1040,14 +1118,11 @@ CONFIG_NTFS_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1071,15 +1146,18 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
@@ -1094,6 +1172,7 @@ CONFIG_CIFS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1163,10 +1242,12 @@ CONFIG_NLS_UTF8=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
 
 #
 # HP Simulator drivers
@@ -1187,6 +1268,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=20
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1194,6 +1276,7 @@ CONFIG_LOG_BUF_SHIFT=20
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 # CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1215,7 +1298,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c
index 80f8ef013939..a5a5637507be 100644
--- a/arch/ia64/hp/common/hwsw_iommu.c
+++ b/arch/ia64/hp/common/hwsw_iommu.c
@@ -17,7 +17,7 @@
 #include <asm/machvec.h>
 
 /* swiotlb declarations & definitions: */
-extern void swiotlb_init_with_default_size (size_t size);
+extern int swiotlb_late_init_with_default_size (size_t size);
 extern ia64_mv_dma_alloc_coherent	swiotlb_alloc_coherent;
 extern ia64_mv_dma_free_coherent	swiotlb_free_coherent;
 extern ia64_mv_dma_map_single		swiotlb_map_single;
@@ -67,11 +67,20 @@ void
 hwsw_init (void)
 {
 	/* default to a smallish 2MB sw I/O TLB */
-	swiotlb_init_with_default_size (2 * (1<<20));
+	if (swiotlb_late_init_with_default_size (2 * (1<<20)) != 0) {
+#ifdef CONFIG_IA64_GENERIC
+		/* Better to have normal DMA than panic */
+		printk(KERN_WARNING "%s: Failed to initialize software I/O TLB,"
+		       " reverting to hpzx1 platform vector\n", __FUNCTION__);
+		machvec_init("hpzx1");
+#else
+		panic("Unable to initialize software I/O TLB services");
+#endif
+	}
 }
 
 void *
-hwsw_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flags)
+hwsw_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags)
 {
 	if (use_swiotlb(dev))
 		return swiotlb_alloc_coherent(dev, size, dma_handle, flags);
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 11957598a8b9..bdccd0b1eb60 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -1076,7 +1076,7 @@ void sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, int dir)
  * See Documentation/DMA-mapping.txt
  */
 void *
-sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flags)
+sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags)
 {
 	struct ioc *ioc;
 	void *addr;
@@ -2028,9 +2028,40 @@ static struct acpi_driver acpi_sba_ioc_driver = {
 static int __init
 sba_init(void)
 {
+	if (!ia64_platform_is("hpzx1") && !ia64_platform_is("hpzx1_swiotlb"))
+		return 0;
+
 	acpi_bus_register_driver(&acpi_sba_ioc_driver);
-	if (!ioc_list)
+	if (!ioc_list) {
+#ifdef CONFIG_IA64_GENERIC
+		extern int swiotlb_late_init_with_default_size (size_t size);
+
+		/*
+		 * If we didn't find something sba_iommu can claim, we
+		 * need to setup the swiotlb and switch to the dig machvec.
+		 */
+		if (swiotlb_late_init_with_default_size(64 * (1<<20)) != 0)
+			panic("Unable to find SBA IOMMU or initialize "
+			      "software I/O TLB: Try machvec=dig boot option");
+		machvec_init("dig");
+#else
+		panic("Unable to find SBA IOMMU: Try a generic or DIG kernel");
+#endif
 		return 0;
+	}
+
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_HP_ZX1_SWIOTLB)
+	/*
+	 * hpzx1_swiotlb needs to have a fairly small swiotlb bounce
+	 * buffer setup to support devices with smaller DMA masks than
+	 * sba_iommu can handle.
+	 */
+	if (ia64_platform_is("hpzx1_swiotlb")) {
+		extern void hwsw_init(void);
+
+		hwsw_init();
+	}
+#endif
 
 #ifdef CONFIG_PCI
 	{
@@ -2048,18 +2079,6 @@ sba_init(void)
 
 subsys_initcall(sba_init); /* must be initialized after ACPI etc., but before any drivers... */
 
-extern void dig_setup(char**);
-/*
- * MAX_DMA_ADDRESS needs to be setup prior to paging_init to do any good,
- * so we use the platform_setup hook to fix it up.
- */
-void __init
-sba_setup(char **cmdline_p)
-{
-	MAX_DMA_ADDRESS = ~0UL;
-	dig_setup(cmdline_p);
-}
-
 static int __init
 nosbagart(char *str)
 {
diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c
index a18983a3c934..a3fe97531134 100644
--- a/arch/ia64/hp/sim/simscsi.c
+++ b/arch/ia64/hp/sim/simscsi.c
@@ -205,10 +205,11 @@ simscsi_get_disk_size (int fd)
 	char buf[512];
 
 	/*
-	 * This is a bit kludgey: the simulator doesn't provide a direct way of determining
-	 * the disk size, so we do a binary search, assuming a maximum disk size of 4GB.
+	 * This is a bit kludgey: the simulator doesn't provide a
+	 * direct way of determining the disk size, so we do a binary
+	 * search, assuming a maximum disk size of 128GB.
 	 */
-	for (bit = (4UL << 30)/512; bit != 0; bit >>= 1) {
+	for (bit = (128UL << 30)/512; bit != 0; bit >>= 1) {
 		req.addr = __pa(&buf);
 		req.len = sizeof(buf);
 		ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ);
@@ -225,8 +226,10 @@ simscsi_readwrite10 (struct scsi_cmnd *sc, int mode)
 {
 	unsigned long offset;
 
-	offset = (  (sc->cmnd[2] << 24) | (sc->cmnd[3] << 16)
-		  | (sc->cmnd[4] <<  8) | (sc->cmnd[5] <<  0))*512;
+	offset = (((unsigned long)sc->cmnd[2] << 24) 
+		| ((unsigned long)sc->cmnd[3] << 16)
+		| ((unsigned long)sc->cmnd[4] <<  8) 
+		| ((unsigned long)sc->cmnd[5] <<  0))*512UL;
 	if (sc->use_sg > 0)
 		simscsi_sg_readwrite(sc, mode, offset);
 	else
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 3fa67ecebc83..dc282710421a 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -36,6 +36,7 @@
 #include <linux/uio.h>
 #include <linux/nfs_fs.h>
 #include <linux/quota.h>
+#include <linux/syscalls.h>
 #include <linux/sunrpc/svc.h>
 #include <linux/nfsd/nfsd.h>
 #include <linux/nfsd/cache.h>
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 7e926471e4ec..9ad94ddf6687 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -838,7 +838,7 @@ EXPORT_SYMBOL(acpi_unmap_lsapic);
 #endif				/* CONFIG_ACPI_HOTPLUG_CPU */
 
 #ifdef CONFIG_ACPI_NUMA
-acpi_status __devinit
+static acpi_status __devinit
 acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret)
 {
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -890,7 +890,16 @@ acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret)
 	map_iosapic_to_node(gsi_base, node);
 	return AE_OK;
 }
-#endif				/* CONFIG_NUMA */
+
+static int __init
+acpi_map_iosapics (void)
+{
+	acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL);
+	return 0;
+}
+
+fs_initcall(acpi_map_iosapics);
+#endif				/* CONFIG_ACPI_NUMA */
 
 int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
 {
diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c
index 768c7e46957c..6ade3790ce07 100644
--- a/arch/ia64/kernel/cyclone.c
+++ b/arch/ia64/kernel/cyclone.c
@@ -2,6 +2,7 @@
 #include <linux/smp.h>
 #include <linux/time.h>
 #include <linux/errno.h>
+#include <linux/timex.h>
 #include <asm/io.h>
 
 /* IBM Summit (EXA) Cyclone counter code*/
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index 179f230816ed..f72ea6aebcb1 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -239,57 +239,30 @@ is_available_memory (efi_memory_desc_t *md)
 	return 0;
 }
 
-/*
- * Trim descriptor MD so its starts at address START_ADDR.  If the descriptor covers
- * memory that is normally available to the kernel, issue a warning that some memory
- * is being ignored.
- */
-static void
-trim_bottom (efi_memory_desc_t *md, u64 start_addr)
-{
-	u64 num_skipped_pages;
+typedef struct kern_memdesc {
+	u64 attribute;
+	u64 start;
+	u64 num_pages;
+} kern_memdesc_t;
 
-	if (md->phys_addr >= start_addr || !md->num_pages)
-		return;
-
-	num_skipped_pages = (start_addr - md->phys_addr) >> EFI_PAGE_SHIFT;
-	if (num_skipped_pages > md->num_pages)
-		num_skipped_pages = md->num_pages;
-
-	if (is_available_memory(md))
-		printk(KERN_NOTICE "efi.%s: ignoring %luKB of memory at 0x%lx due to granule hole "
-		       "at 0x%lx\n", __FUNCTION__,
-		       (num_skipped_pages << EFI_PAGE_SHIFT) >> 10,
-		       md->phys_addr, start_addr - IA64_GRANULE_SIZE);
-	/*
-	 * NOTE: Don't set md->phys_addr to START_ADDR because that could cause the memory
-	 * descriptor list to become unsorted.  In such a case, md->num_pages will be
-	 * zero, so the Right Thing will happen.
-	 */
-	md->phys_addr += num_skipped_pages << EFI_PAGE_SHIFT;
-	md->num_pages -= num_skipped_pages;
-}
+static kern_memdesc_t *kern_memmap;
 
 static void
-trim_top (efi_memory_desc_t *md, u64 end_addr)
+walk (efi_freemem_callback_t callback, void *arg, u64 attr)
 {
-	u64 num_dropped_pages, md_end_addr;
-
-	md_end_addr = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT);
-
-	if (md_end_addr <= end_addr || !md->num_pages)
-		return;
+	kern_memdesc_t *k;
+	u64 start, end, voff;
 
-	num_dropped_pages = (md_end_addr - end_addr) >> EFI_PAGE_SHIFT;
-	if (num_dropped_pages > md->num_pages)
-		num_dropped_pages = md->num_pages;
-
-	if (is_available_memory(md))
-		printk(KERN_NOTICE "efi.%s: ignoring %luKB of memory at 0x%lx due to granule hole "
-		       "at 0x%lx\n", __FUNCTION__,
-		       (num_dropped_pages << EFI_PAGE_SHIFT) >> 10,
-		       md->phys_addr, end_addr);
-	md->num_pages -= num_dropped_pages;
+	voff = (attr == EFI_MEMORY_WB) ? PAGE_OFFSET : __IA64_UNCACHED_OFFSET;
+	for (k = kern_memmap; k->start != ~0UL; k++) {
+		if (k->attribute != attr)
+			continue;
+		start = PAGE_ALIGN(k->start);
+		end = (k->start + (k->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK;
+		if (start < end)
+			if ((*callback)(start + voff, end + voff, arg) < 0)
+				return;
+	}
 }
 
 /*
@@ -299,148 +272,19 @@ trim_top (efi_memory_desc_t *md, u64 end_addr)
 void
 efi_memmap_walk (efi_freemem_callback_t callback, void *arg)
 {
-	int prev_valid = 0;
-	struct range {
-		u64 start;
-		u64 end;
-	} prev, curr;
-	void *efi_map_start, *efi_map_end, *p, *q;
-	efi_memory_desc_t *md, *check_md;
-	u64 efi_desc_size, start, end, granule_addr, last_granule_addr, first_non_wb_addr = 0;
-	unsigned long total_mem = 0;
-
-	efi_map_start = __va(ia64_boot_param->efi_memmap);
-	efi_map_end   = efi_map_start + ia64_boot_param->efi_memmap_size;
-	efi_desc_size = ia64_boot_param->efi_memdesc_size;
-
-	for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
-		md = p;
-
-		/* skip over non-WB memory descriptors; that's all we're interested in... */
-		if (!(md->attribute & EFI_MEMORY_WB))
-			continue;
-
-		/*
-		 * granule_addr is the base of md's first granule.
-		 * [granule_addr - first_non_wb_addr) is guaranteed to
-		 * be contiguous WB memory.
-		 */
-		granule_addr = GRANULEROUNDDOWN(md->phys_addr);
-		first_non_wb_addr = max(first_non_wb_addr, granule_addr);
-
-		if (first_non_wb_addr < md->phys_addr) {
-			trim_bottom(md, granule_addr + IA64_GRANULE_SIZE);
-			granule_addr = GRANULEROUNDDOWN(md->phys_addr);
-			first_non_wb_addr = max(first_non_wb_addr, granule_addr);
-		}
-
-		for (q = p; q < efi_map_end; q += efi_desc_size) {
-			check_md = q;
-
-			if ((check_md->attribute & EFI_MEMORY_WB) &&
-			    (check_md->phys_addr == first_non_wb_addr))
-				first_non_wb_addr += check_md->num_pages << EFI_PAGE_SHIFT;
-			else
-				break;		/* non-WB or hole */
-		}
-
-		last_granule_addr = GRANULEROUNDDOWN(first_non_wb_addr);
-		if (last_granule_addr < md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT))
-			trim_top(md, last_granule_addr);
-
-		if (is_available_memory(md)) {
-			if (md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) >= max_addr) {
-				if (md->phys_addr >= max_addr)
-					continue;
-				md->num_pages = (max_addr - md->phys_addr) >> EFI_PAGE_SHIFT;
-				first_non_wb_addr = max_addr;
-			}
-
-			if (total_mem >= mem_limit)
-				continue;
-
-			if (total_mem + (md->num_pages << EFI_PAGE_SHIFT) > mem_limit) {
-				unsigned long limit_addr = md->phys_addr;
-
-				limit_addr += mem_limit - total_mem;
-				limit_addr = GRANULEROUNDDOWN(limit_addr);
-
-				if (md->phys_addr > limit_addr)
-					continue;
-
-				md->num_pages = (limit_addr - md->phys_addr) >>
-				                EFI_PAGE_SHIFT;
-				first_non_wb_addr = max_addr = md->phys_addr +
-				              (md->num_pages << EFI_PAGE_SHIFT);
-			}
-			total_mem += (md->num_pages << EFI_PAGE_SHIFT);
-
-			if (md->num_pages == 0)
-				continue;
-
-			curr.start = PAGE_OFFSET + md->phys_addr;
-			curr.end   = curr.start + (md->num_pages << EFI_PAGE_SHIFT);
-
-			if (!prev_valid) {
-				prev = curr;
-				prev_valid = 1;
-			} else {
-				if (curr.start < prev.start)
-					printk(KERN_ERR "Oops: EFI memory table not ordered!\n");
-
-				if (prev.end == curr.start) {
-					/* merge two consecutive memory ranges */
-					prev.end = curr.end;
-				} else {
-					start = PAGE_ALIGN(prev.start);
-					end = prev.end & PAGE_MASK;
-					if ((end > start) && (*callback)(start, end, arg) < 0)
-						return;
-					prev = curr;
-				}
-			}
-		}
-	}
-	if (prev_valid) {
-		start = PAGE_ALIGN(prev.start);
-		end = prev.end & PAGE_MASK;
-		if (end > start)
-			(*callback)(start, end, arg);
-	}
+	walk(callback, arg, EFI_MEMORY_WB);
 }
 
 /*
- * Walk the EFI memory map to pull out leftover pages in the lower
- * memory regions which do not end up in the regular memory map and
- * stick them into the uncached allocator
- *
- * The regular walk function is significantly more complex than the
- * uncached walk which means it really doesn't make sense to try and
- * marge the two.
+ * Walks the EFI memory map and calls CALLBACK once for each EFI memory descriptor that
+ * has memory that is available for uncached allocator.
  */
-void __init
-efi_memmap_walk_uc (efi_freemem_callback_t callback)
+void
+efi_memmap_walk_uc (efi_freemem_callback_t callback, void *arg)
 {
-	void *efi_map_start, *efi_map_end, *p;
-	efi_memory_desc_t *md;
-	u64 efi_desc_size, start, end;
-
-	efi_map_start = __va(ia64_boot_param->efi_memmap);
-	efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
-	efi_desc_size = ia64_boot_param->efi_memdesc_size;
-
-	for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
-		md = p;
-		if (md->attribute == EFI_MEMORY_UC) {
-			start = PAGE_ALIGN(md->phys_addr);
-			end = PAGE_ALIGN((md->phys_addr+(md->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK);
-			if ((*callback)(start, end, NULL) < 0)
-				return;
-		}
-	}
+	walk(callback, arg, EFI_MEMORY_UC);
 }
 
-
 /*
  * Look for the PAL_CODE region reported by EFI and maps it using an
  * ITR to enable safe PAL calls in virtual mode.  See IA-64 Processor
@@ -862,3 +706,307 @@ efi_uart_console_only(void)
 	printk(KERN_ERR "Malformed %s value\n", name);
 	return 0;
 }
+
+#define efi_md_size(md)	(md->num_pages << EFI_PAGE_SHIFT)
+
+static inline u64
+kmd_end(kern_memdesc_t *kmd)
+{
+	return (kmd->start + (kmd->num_pages << EFI_PAGE_SHIFT));
+}
+
+static inline u64
+efi_md_end(efi_memory_desc_t *md)
+{
+	return (md->phys_addr + efi_md_size(md));
+}
+
+static inline int
+efi_wb(efi_memory_desc_t *md)
+{
+	return (md->attribute & EFI_MEMORY_WB);
+}
+
+static inline int
+efi_uc(efi_memory_desc_t *md)
+{
+	return (md->attribute & EFI_MEMORY_UC);
+}
+
+/*
+ * Look for the first granule aligned memory descriptor memory
+ * that is big enough to hold EFI memory map. Make sure this
+ * descriptor is atleast granule sized so it does not get trimmed
+ */
+struct kern_memdesc *
+find_memmap_space (void)
+{
+	u64	contig_low=0, contig_high=0;
+	u64	as = 0, ae;
+	void *efi_map_start, *efi_map_end, *p, *q;
+	efi_memory_desc_t *md, *pmd = NULL, *check_md;
+	u64	space_needed, efi_desc_size;
+	unsigned long total_mem = 0;
+
+	efi_map_start = __va(ia64_boot_param->efi_memmap);
+	efi_map_end   = efi_map_start + ia64_boot_param->efi_memmap_size;
+	efi_desc_size = ia64_boot_param->efi_memdesc_size;
+
+	/*
+	 * Worst case: we need 3 kernel descriptors for each efi descriptor
+	 * (if every entry has a WB part in the middle, and UC head and tail),
+	 * plus one for the end marker.
+	 */
+	space_needed = sizeof(kern_memdesc_t) *
+		(3 * (ia64_boot_param->efi_memmap_size/efi_desc_size) + 1);
+
+	for (p = efi_map_start; p < efi_map_end; pmd = md, p += efi_desc_size) {
+		md = p;
+		if (!efi_wb(md)) {
+			continue;
+		}
+		if (pmd == NULL || !efi_wb(pmd) || efi_md_end(pmd) != md->phys_addr) {
+			contig_low = GRANULEROUNDUP(md->phys_addr);
+			contig_high = efi_md_end(md);
+			for (q = p + efi_desc_size; q < efi_map_end; q += efi_desc_size) {
+				check_md = q;
+				if (!efi_wb(check_md))
+					break;
+				if (contig_high != check_md->phys_addr)
+					break;
+				contig_high = efi_md_end(check_md);
+			}
+			contig_high = GRANULEROUNDDOWN(contig_high);
+		}
+		if (!is_available_memory(md) || md->type == EFI_LOADER_DATA)
+			continue;
+
+		/* Round ends inward to granule boundaries */
+		as = max(contig_low, md->phys_addr);
+		ae = min(contig_high, efi_md_end(md));
+
+		/* keep within max_addr= command line arg */
+		ae = min(ae, max_addr);
+		if (ae <= as)
+			continue;
+
+		/* avoid going over mem= command line arg */
+		if (total_mem + (ae - as) > mem_limit)
+			ae -= total_mem + (ae - as) - mem_limit;
+
+		if (ae <= as)
+			continue;
+
+		if (ae - as > space_needed)
+			break;
+	}
+	if (p >= efi_map_end)
+		panic("Can't allocate space for kernel memory descriptors");
+
+	return __va(as);
+}
+
+/*
+ * Walk the EFI memory map and gather all memory available for kernel
+ * to use.  We can allocate partial granules only if the unavailable
+ * parts exist, and are WB.
+ */
+void
+efi_memmap_init(unsigned long *s, unsigned long *e)
+{
+	struct kern_memdesc *k, *prev = 0;
+	u64	contig_low=0, contig_high=0;
+	u64	as, ae, lim;
+	void *efi_map_start, *efi_map_end, *p, *q;
+	efi_memory_desc_t *md, *pmd = NULL, *check_md;
+	u64	efi_desc_size;
+	unsigned long total_mem = 0;
+
+	k = kern_memmap = find_memmap_space();
+
+	efi_map_start = __va(ia64_boot_param->efi_memmap);
+	efi_map_end   = efi_map_start + ia64_boot_param->efi_memmap_size;
+	efi_desc_size = ia64_boot_param->efi_memdesc_size;
+
+	for (p = efi_map_start; p < efi_map_end; pmd = md, p += efi_desc_size) {
+		md = p;
+		if (!efi_wb(md)) {
+			if (efi_uc(md) && (md->type == EFI_CONVENTIONAL_MEMORY ||
+				    	   md->type == EFI_BOOT_SERVICES_DATA)) {
+				k->attribute = EFI_MEMORY_UC;
+				k->start = md->phys_addr;
+				k->num_pages = md->num_pages;
+				k++;
+			}
+			continue;
+		}
+		if (pmd == NULL || !efi_wb(pmd) || efi_md_end(pmd) != md->phys_addr) {
+			contig_low = GRANULEROUNDUP(md->phys_addr);
+			contig_high = efi_md_end(md);
+			for (q = p + efi_desc_size; q < efi_map_end; q += efi_desc_size) {
+				check_md = q;
+				if (!efi_wb(check_md))
+					break;
+				if (contig_high != check_md->phys_addr)
+					break;
+				contig_high = efi_md_end(check_md);
+			}
+			contig_high = GRANULEROUNDDOWN(contig_high);
+		}
+		if (!is_available_memory(md))
+			continue;
+
+		/*
+		 * Round ends inward to granule boundaries
+		 * Give trimmings to uncached allocator
+		 */
+		if (md->phys_addr < contig_low) {
+			lim = min(efi_md_end(md), contig_low);
+			if (efi_uc(md)) {
+				if (k > kern_memmap && (k-1)->attribute == EFI_MEMORY_UC &&
+				    kmd_end(k-1) == md->phys_addr) {
+					(k-1)->num_pages += (lim - md->phys_addr) >> EFI_PAGE_SHIFT;
+				} else {
+					k->attribute = EFI_MEMORY_UC;
+					k->start = md->phys_addr;
+					k->num_pages = (lim - md->phys_addr) >> EFI_PAGE_SHIFT;
+					k++;
+				}
+			}
+			as = contig_low;
+		} else
+			as = md->phys_addr;
+
+		if (efi_md_end(md) > contig_high) {
+			lim = max(md->phys_addr, contig_high);
+			if (efi_uc(md)) {
+				if (lim == md->phys_addr && k > kern_memmap &&
+				    (k-1)->attribute == EFI_MEMORY_UC &&
+				    kmd_end(k-1) == md->phys_addr) {
+					(k-1)->num_pages += md->num_pages;
+				} else {
+					k->attribute = EFI_MEMORY_UC;
+					k->start = lim;
+					k->num_pages = (efi_md_end(md) - lim) >> EFI_PAGE_SHIFT;
+					k++;
+				}
+			}
+			ae = contig_high;
+		} else
+			ae = efi_md_end(md);
+
+		/* keep within max_addr= command line arg */
+		ae = min(ae, max_addr);
+		if (ae <= as)
+			continue;
+
+		/* avoid going over mem= command line arg */
+		if (total_mem + (ae - as) > mem_limit)
+			ae -= total_mem + (ae - as) - mem_limit;
+
+		if (ae <= as)
+			continue;
+		if (prev && kmd_end(prev) == md->phys_addr) {
+			prev->num_pages += (ae - as) >> EFI_PAGE_SHIFT;
+			total_mem += ae - as;
+			continue;
+		}
+		k->attribute = EFI_MEMORY_WB;
+		k->start = as;
+		k->num_pages = (ae - as) >> EFI_PAGE_SHIFT;
+		total_mem += ae - as;
+		prev = k++;
+	}
+	k->start = ~0L; /* end-marker */
+
+	/* reserve the memory we are using for kern_memmap */
+	*s = (u64)kern_memmap;
+	*e = (u64)++k;
+}
+
+void
+efi_initialize_iomem_resources(struct resource *code_resource,
+			       struct resource *data_resource)
+{
+	struct resource *res;
+	void *efi_map_start, *efi_map_end, *p;
+	efi_memory_desc_t *md;
+	u64 efi_desc_size;
+	char *name;
+	unsigned long flags;
+
+	efi_map_start = __va(ia64_boot_param->efi_memmap);
+	efi_map_end   = efi_map_start + ia64_boot_param->efi_memmap_size;
+	efi_desc_size = ia64_boot_param->efi_memdesc_size;
+
+	res = NULL;
+
+	for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
+		md = p;
+
+		if (md->num_pages == 0) /* should not happen */
+			continue;
+
+		flags = IORESOURCE_MEM;
+		switch (md->type) {
+
+			case EFI_MEMORY_MAPPED_IO:
+			case EFI_MEMORY_MAPPED_IO_PORT_SPACE:
+				continue;
+
+			case EFI_LOADER_CODE:
+			case EFI_LOADER_DATA:
+			case EFI_BOOT_SERVICES_DATA:
+			case EFI_BOOT_SERVICES_CODE:
+			case EFI_CONVENTIONAL_MEMORY:
+				if (md->attribute & EFI_MEMORY_WP) {
+					name = "System ROM";
+					flags |= IORESOURCE_READONLY;
+				} else {
+					name = "System RAM";
+				}
+				break;
+
+			case EFI_ACPI_MEMORY_NVS:
+				name = "ACPI Non-volatile Storage";
+				flags |= IORESOURCE_BUSY;
+				break;
+
+			case EFI_UNUSABLE_MEMORY:
+				name = "reserved";
+				flags |= IORESOURCE_BUSY | IORESOURCE_DISABLED;
+				break;
+
+			case EFI_RESERVED_TYPE:
+			case EFI_RUNTIME_SERVICES_CODE:
+			case EFI_RUNTIME_SERVICES_DATA:
+			case EFI_ACPI_RECLAIM_MEMORY:
+			default:
+				name = "reserved";
+				flags |= IORESOURCE_BUSY;
+				break;
+		}
+
+		if ((res = kcalloc(1, sizeof(struct resource), GFP_KERNEL)) == NULL) {
+			printk(KERN_ERR "failed to alocate resource for iomem\n");
+			return;
+		}
+
+		res->name = name;
+		res->start = md->phys_addr;
+		res->end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1;
+		res->flags = flags;
+
+		if (insert_resource(&iomem_resource, res) < 0)
+			kfree(res);
+		else {
+			/*
+			 * We don't know which region contains
+			 * kernel data so we try it repeatedly and
+			 * let the resource manager test it.
+			 */
+			insert_resource(res, code_resource);
+			insert_resource(res, data_resource);
+		}
+	}
+}
diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c
index 205d98028261..d33244c32759 100644
--- a/arch/ia64/kernel/irq.c
+++ b/arch/ia64/kernel/irq.c
@@ -57,9 +57,9 @@ int show_interrupts(struct seq_file *p, void *v)
 
 	if (i == 0) {
 		seq_printf(p, "           ");
-		for (j=0; j<NR_CPUS; j++)
-			if (cpu_online(j))
-				seq_printf(p, "CPU%d       ",j);
+		for_each_online_cpu(j) {
+			seq_printf(p, "CPU%d       ",j);
+		}
 		seq_putc(p, '\n');
 	}
 
@@ -72,9 +72,9 @@ int show_interrupts(struct seq_file *p, void *v)
 #ifndef CONFIG_SMP
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #else
-		for (j = 0; j < NR_CPUS; j++)
-			if (cpu_online(j))
-				seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+		for_each_online_cpu(j) {
+			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+		}
 #endif
 		seq_printf(p, " %14s", irq_desc[i].handler->typename);
 		seq_printf(p, "  %s", action->name);
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index d0a5106fba24..52c47da17246 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -508,9 +508,7 @@ ia64_mca_wakeup_all(void)
 	int cpu;
 
 	/* Clear the Rendez checkin flag for all cpus */
-	for(cpu = 0; cpu < NR_CPUS; cpu++) {
-		if (!cpu_online(cpu))
-			continue;
+	for_each_online_cpu(cpu) {
 		if (ia64_mc_info.imi_rendez_checkin[cpu] == IA64_MCA_RENDEZ_CHECKIN_DONE)
 			ia64_mca_wakeup(cpu);
 	}
diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index f1aca7cffd12..7a2f0a798d12 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -947,8 +947,8 @@ void
 percpu_modcopy (void *pcpudst, const void *src, unsigned long size)
 {
 	unsigned int i;
-	for (i = 0; i < NR_CPUS; i++)
-		if (cpu_possible(i))
-			memcpy(pcpudst + __per_cpu_offset[i], src, size);
+	for_each_cpu(i) {
+		memcpy(pcpudst + __per_cpu_offset[i], src, size);
+	}
 }
 #endif /* CONFIG_SMP */
diff --git a/arch/ia64/kernel/patch.c b/arch/ia64/kernel/patch.c
index 367804a605fa..6a4ac7d70b35 100644
--- a/arch/ia64/kernel/patch.c
+++ b/arch/ia64/kernel/patch.c
@@ -64,22 +64,30 @@ ia64_patch (u64 insn_addr, u64 mask, u64 val)
 void
 ia64_patch_imm64 (u64 insn_addr, u64 val)
 {
-	ia64_patch(insn_addr,
+	/* The assembler may generate offset pointing to either slot 1
+	   or slot 2 for a long (2-slot) instruction, occupying slots 1
+	   and 2.  */
+  	insn_addr &= -16UL;
+	ia64_patch(insn_addr + 2,
 		   0x01fffefe000UL, (  ((val & 0x8000000000000000UL) >> 27) /* bit 63 -> 36 */
 				     | ((val & 0x0000000000200000UL) <<  0) /* bit 21 -> 21 */
 				     | ((val & 0x00000000001f0000UL) <<  6) /* bit 16 -> 22 */
 				     | ((val & 0x000000000000ff80UL) << 20) /* bit  7 -> 27 */
 				     | ((val & 0x000000000000007fUL) << 13) /* bit  0 -> 13 */));
-	ia64_patch(insn_addr - 1, 0x1ffffffffffUL, val >> 22);
+	ia64_patch(insn_addr + 1, 0x1ffffffffffUL, val >> 22);
 }
 
 void
 ia64_patch_imm60 (u64 insn_addr, u64 val)
 {
-	ia64_patch(insn_addr,
+	/* The assembler may generate offset pointing to either slot 1
+	   or slot 2 for a long (2-slot) instruction, occupying slots 1
+	   and 2.  */
+  	insn_addr &= -16UL;
+	ia64_patch(insn_addr + 2,
 		   0x011ffffe000UL, (  ((val & 0x0800000000000000UL) >> 23) /* bit 59 -> 36 */
 				     | ((val & 0x00000000000fffffUL) << 13) /* bit  0 -> 13 */));
-	ia64_patch(insn_addr - 1, 0x1fffffffffcUL, val >> 18);
+	ia64_patch(insn_addr + 1, 0x1fffffffffcUL, val >> 18);
 }
 
 /*
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index d71731ee5b61..f7dfc107cb7b 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -2352,7 +2352,8 @@ pfm_smpl_buffer_alloc(struct task_struct *task, pfm_context_t *ctx, unsigned lon
 	insert_vm_struct(mm, vma);
 
 	mm->total_vm  += size >> PAGE_SHIFT;
-	vm_stat_account(vma);
+	vm_stat_account(vma->vm_mm, vma->vm_flags, vma->vm_file,
+							vma_pages(vma));
 	up_write(&task->mm->mmap_sem);
 
 	/*
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index bbb8bc7c0552..4b19d0410632 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -587,8 +587,9 @@ thread_matches (struct task_struct *thread, unsigned long addr)
 static struct task_struct *
 find_thread_for_addr (struct task_struct *child, unsigned long addr)
 {
-	struct task_struct *g, *p;
+	struct task_struct *p;
 	struct mm_struct *mm;
+	struct list_head *this, *next;
 	int mm_users;
 
 	if (!(mm = get_task_mm(child)))
@@ -600,28 +601,21 @@ find_thread_for_addr (struct task_struct *child, unsigned long addr)
 		goto out;		/* not multi-threaded */
 
 	/*
-	 * First, traverse the child's thread-list.  Good for scalability with
-	 * NPTL-threads.
+	 * Traverse the current process' children list.  Every task that
+	 * one attaches to becomes a child.  And it is only attached children
+	 * of the debugger that are of interest (ptrace_check_attach checks
+	 * for this).
 	 */
-	p = child;
-	do {
-		if (thread_matches(p, addr)) {
-			child = p;
-			goto out;
-		}
-		if (mm_users-- <= 1)
-			goto out;
-	} while ((p = next_thread(p)) != child);
-
-	do_each_thread(g, p) {
-		if (child->mm != mm)
+ 	list_for_each_safe(this, next, &current->children) {
+		p = list_entry(this, struct task_struct, sibling);
+		if (p->mm != mm)
 			continue;
-
 		if (thread_matches(p, addr)) {
 			child = p;
 			goto out;
 		}
-	} while_each_thread(g, p);
+	}
+
   out:
 	mmput(mm);
 	return child;
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 1f5c26dbe705..fc56ca2da358 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -78,6 +78,19 @@ struct screen_info screen_info;
 unsigned long vga_console_iobase;
 unsigned long vga_console_membase;
 
+static struct resource data_resource = {
+	.name	= "Kernel data",
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource code_resource = {
+	.name	= "Kernel code",
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+extern void efi_initialize_iomem_resources(struct resource *,
+		struct resource *);
+extern char _text[], _end[], _etext[];
+
 unsigned long ia64_max_cacheline_size;
 unsigned long ia64_iobase;	/* virtual address for I/O accesses */
 EXPORT_SYMBOL(ia64_iobase);
@@ -171,6 +184,22 @@ sort_regions (struct rsvd_region *rsvd_region, int max)
 	}
 }
 
+/*
+ * Request address space for all standard resources
+ */
+static int __init register_memory(void)
+{
+	code_resource.start = ia64_tpa(_text);
+	code_resource.end   = ia64_tpa(_etext) - 1;
+	data_resource.start = ia64_tpa(_etext);
+	data_resource.end   = ia64_tpa(_end) - 1;
+	efi_initialize_iomem_resources(&code_resource, &data_resource);
+
+	return 0;
+}
+
+__initcall(register_memory);
+
 /**
  * reserve_memory - setup reserved memory areas
  *
@@ -211,6 +240,9 @@ reserve_memory (void)
 	}
 #endif
 
+	efi_memmap_init(&rsvd_region[n].start, &rsvd_region[n].end);
+	n++;
+
 	/* end of memory marker */
 	rsvd_region[n].start = ~0UL;
 	rsvd_region[n].end   = ~0UL;
@@ -244,28 +276,31 @@ find_initrd (void)
 static void __init
 io_port_init (void)
 {
-	extern unsigned long ia64_iobase;
 	unsigned long phys_iobase;
 
 	/*
-	 *  Set `iobase' to the appropriate address in region 6 (uncached access range).
+	 * Set `iobase' based on the EFI memory map or, failing that, the
+	 * value firmware left in ar.k0.
 	 *
-	 *  The EFI memory map is the "preferred" location to get the I/O port space base,
-	 *  rather the relying on AR.KR0. This should become more clear in future SAL
-	 *  specs. We'll fall back to getting it out of AR.KR0 if no appropriate entry is
-	 *  found in the memory map.
+	 * Note that in ia32 mode, IN/OUT instructions use ar.k0 to compute
+	 * the port's virtual address, so ia32_load_state() loads it with a
+	 * user virtual address.  But in ia64 mode, glibc uses the
+	 * *physical* address in ar.k0 to mmap the appropriate area from
+	 * /dev/mem, and the inX()/outX() interfaces use MMIO.  In both
+	 * cases, user-mode can only use the legacy 0-64K I/O port space.
+	 *
+	 * ar.k0 is not involved in kernel I/O port accesses, which can use
+	 * any of the I/O port spaces and are done via MMIO using the
+	 * virtual mmio_base from the appropriate io_space[].
 	 */
 	phys_iobase = efi_get_iobase();
-	if (phys_iobase)
-		/* set AR.KR0 since this is all we use it for anyway */
-		ia64_set_kr(IA64_KR_IO_BASE, phys_iobase);
-	else {
+	if (!phys_iobase) {
 		phys_iobase = ia64_get_kr(IA64_KR_IO_BASE);
-		printk(KERN_INFO "No I/O port range found in EFI memory map, falling back "
-		       "to AR.KR0\n");
-		printk(KERN_INFO "I/O port base = 0x%lx\n", phys_iobase);
+		printk(KERN_INFO "No I/O port range found in EFI memory map, "
+			"falling back to AR.KR0 (0x%lx)\n", phys_iobase);
 	}
 	ia64_iobase = (unsigned long) ioremap(phys_iobase, 0);
+	ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase));
 
 	/* setup legacy IO port space */
 	io_space[0].mmio_base = ia64_iobase;
@@ -526,7 +561,7 @@ show_cpuinfo (struct seq_file *m, void *v)
 		   c->itc_freq / 1000000, c->itc_freq % 1000000,
 		   lpj*HZ/500000, (lpj*HZ/5000) % 100);
 #ifdef CONFIG_SMP
-	seq_printf(m, "siblings   : %u\n", c->num_log);
+	seq_printf(m, "siblings   : %u\n", cpus_weight(cpu_core_map[cpunum]));
 	if (c->threads_per_core > 1 || c->cores_per_socket > 1)
 		seq_printf(m,
 		   	   "physical id: %u\n"
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 0166a9847095..657ac99a451c 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -185,8 +185,8 @@ send_IPI_allbutself (int op)
 {
 	unsigned int i;
 
-	for (i = 0; i < NR_CPUS; i++) {
-		if (cpu_online(i) && i != smp_processor_id())
+	for_each_online_cpu(i) {
+		if (i != smp_processor_id())
 			send_IPI_single(i, op);
 	}
 }
@@ -199,9 +199,9 @@ send_IPI_all (int op)
 {
 	int i;
 
-	for (i = 0; i < NR_CPUS; i++)
-		if (cpu_online(i))
-			send_IPI_single(i, op);
+	for_each_online_cpu(i) {
+		send_IPI_single(i, op);
+	}
 }
 
 /*
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 7d72c0d872b3..400a48987124 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -694,9 +694,9 @@ smp_cpus_done (unsigned int dummy)
 	 * Allow the user to impress friends.
 	 */
 
-	for (cpu = 0; cpu < NR_CPUS; cpu++)
-		if (cpu_online(cpu))
-			bogosum += cpu_data(cpu)->loops_per_jiffy;
+	for_each_online_cpu(cpu) {
+		bogosum += cpu_data(cpu)->loops_per_jiffy;
+	}
 
 	printk(KERN_INFO "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
 	       (int)num_online_cpus(), bogosum/(500000/HZ), (bogosum/(5000/HZ))%100);
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 8b8a5a45b621..5b7e736f3b49 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -32,10 +32,6 @@
 
 extern unsigned long wall_jiffies;
 
-u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 #define TIME_KEEPER_ID	0	/* smp_processor_id() of time-keeper */
 
 #ifdef CONFIG_IA64_DEBUG_IRQ
diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c
index 4e9d06c48a8b..c6d40446c2c4 100644
--- a/arch/ia64/kernel/uncached.c
+++ b/arch/ia64/kernel/uncached.c
@@ -205,23 +205,18 @@ EXPORT_SYMBOL(uncached_free_page);
 static int __init
 uncached_build_memmap(unsigned long start, unsigned long end, void *arg)
 {
-	long length;
-	unsigned long vstart, vend;
+	long length = end - start;
 	int node;
 
-	length = end - start;
-	vstart = start + __IA64_UNCACHED_OFFSET;
-	vend = end + __IA64_UNCACHED_OFFSET;
-
 	dprintk(KERN_ERR "uncached_build_memmap(%lx %lx)\n", start, end);
 
-	memset((char *)vstart, 0, length);
+	memset((char *)start, 0, length);
 
-	node = paddr_to_nid(start);
+	node = paddr_to_nid(start - __IA64_UNCACHED_OFFSET);
 
-	for (; vstart < vend ; vstart += PAGE_SIZE) {
-		dprintk(KERN_INFO "sticking %lx into the pool!\n", vstart);
-		gen_pool_free(uncached_pool[node], vstart, PAGE_SIZE);
+	for (; start < end ; start += PAGE_SIZE) {
+		dprintk(KERN_INFO "sticking %lx into the pool!\n", start);
+		gen_pool_free(uncached_pool[node], start, PAGE_SIZE);
 	}
 
 	return 0;
diff --git a/arch/ia64/lib/swiotlb.c b/arch/ia64/lib/swiotlb.c
index a604efc7f6c9..96edcc0fdcd9 100644
--- a/arch/ia64/lib/swiotlb.c
+++ b/arch/ia64/lib/swiotlb.c
@@ -49,6 +49,15 @@
  */
 #define IO_TLB_SHIFT 11
 
+#define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT))
+
+/*
+ * Minimum IO TLB size to bother booting with.  Systems with mainly
+ * 64bit capable cards will only lightly use the swiotlb.  If we can't
+ * allocate a contiguous 1MB, we're probably in trouble anyway.
+ */
+#define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT)
+
 int swiotlb_force;
 
 /*
@@ -154,6 +163,99 @@ swiotlb_init (void)
 	swiotlb_init_with_default_size(64 * (1<<20));	/* default to 64MB */
 }
 
+/*
+ * Systems with larger DMA zones (those that don't support ISA) can
+ * initialize the swiotlb later using the slab allocator if needed.
+ * This should be just like above, but with some error catching.
+ */
+int
+swiotlb_late_init_with_default_size (size_t default_size)
+{
+	unsigned long i, req_nslabs = io_tlb_nslabs;
+	unsigned int order;
+
+	if (!io_tlb_nslabs) {
+		io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
+		io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
+	}
+
+	/*
+	 * Get IO TLB memory from the low pages
+	 */
+	order = get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT));
+	io_tlb_nslabs = SLABS_PER_PAGE << order;
+
+	while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
+		io_tlb_start = (char *)__get_free_pages(GFP_DMA | __GFP_NOWARN,
+		                                        order);
+		if (io_tlb_start)
+			break;
+		order--;
+	}
+
+	if (!io_tlb_start)
+		goto cleanup1;
+
+	if (order != get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT))) {
+		printk(KERN_WARNING "Warning: only able to allocate %ld MB "
+		       "for software IO TLB\n", (PAGE_SIZE << order) >> 20);
+		io_tlb_nslabs = SLABS_PER_PAGE << order;
+	}
+	io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT);
+	memset(io_tlb_start, 0, io_tlb_nslabs * (1 << IO_TLB_SHIFT));
+
+	/*
+	 * Allocate and initialize the free list array.  This array is used
+	 * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE
+	 * between io_tlb_start and io_tlb_end.
+	 */
+	io_tlb_list = (unsigned int *)__get_free_pages(GFP_KERNEL,
+	                              get_order(io_tlb_nslabs * sizeof(int)));
+	if (!io_tlb_list)
+		goto cleanup2;
+
+	for (i = 0; i < io_tlb_nslabs; i++)
+ 		io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE);
+	io_tlb_index = 0;
+
+	io_tlb_orig_addr = (unsigned char **)__get_free_pages(GFP_KERNEL,
+	                           get_order(io_tlb_nslabs * sizeof(char *)));
+	if (!io_tlb_orig_addr)
+		goto cleanup3;
+
+	memset(io_tlb_orig_addr, 0, io_tlb_nslabs * sizeof(char *));
+
+	/*
+	 * Get the overflow emergency buffer
+	 */
+	io_tlb_overflow_buffer = (void *)__get_free_pages(GFP_DMA,
+	                                          get_order(io_tlb_overflow));
+	if (!io_tlb_overflow_buffer)
+		goto cleanup4;
+
+	printk(KERN_INFO "Placing %ldMB software IO TLB between 0x%lx - "
+	       "0x%lx\n", (io_tlb_nslabs * (1 << IO_TLB_SHIFT)) >> 20,
+	       virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end));
+
+	return 0;
+
+cleanup4:
+	free_pages((unsigned long)io_tlb_orig_addr, get_order(io_tlb_nslabs *
+	                                                      sizeof(char *)));
+	io_tlb_orig_addr = NULL;
+cleanup3:
+	free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs *
+	                                                 sizeof(int)));
+	io_tlb_list = NULL;
+	io_tlb_end = NULL;
+cleanup2:
+	free_pages((unsigned long)io_tlb_start, order);
+	io_tlb_start = NULL;
+cleanup1:
+	io_tlb_nslabs = req_nslabs;
+	return -ENOMEM;
+}
+
 static inline int
 address_needs_mapping(struct device *hwdev, dma_addr_t addr)
 {
@@ -314,7 +416,7 @@ sync_single(struct device *hwdev, char *dma_addr, size_t size, int dir)
 
 void *
 swiotlb_alloc_coherent(struct device *hwdev, size_t size,
-		       dma_addr_t *dma_handle, int flags)
+		       dma_addr_t *dma_handle, gfp_t flags)
 {
 	unsigned long dev_addr;
 	void *ret;
diff --git a/arch/ia64/mm/Makefile b/arch/ia64/mm/Makefile
index 7078f67887ec..d78d20f0a0f0 100644
--- a/arch/ia64/mm/Makefile
+++ b/arch/ia64/mm/Makefile
@@ -7,6 +7,5 @@ obj-y := init.o fault.o tlb.o extable.o
 obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
 obj-$(CONFIG_NUMA)	   += numa.o
 obj-$(CONFIG_DISCONTIGMEM) += discontig.o
-ifndef CONFIG_DISCONTIGMEM
-obj-y += contig.o
-endif
+obj-$(CONFIG_SPARSEMEM)	   += discontig.o
+obj-$(CONFIG_FLATMEM)	   += contig.o
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index 91a055f5731f..acaaec4e4681 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -269,7 +269,7 @@ paging_init (void)
 	efi_memmap_walk(find_largest_hole, (u64 *)&max_gap);
 	if (max_gap < LARGE_GAP) {
 		vmem_map = (struct page *) 0;
-		free_area_init_node(0, &contig_page_data, zones_size, 0,
+		free_area_init_node(0, NODE_DATA(0), zones_size, 0,
 				    zholes_size);
 	} else {
 		unsigned long map_size;
@@ -282,7 +282,7 @@ paging_init (void)
 		efi_memmap_walk(create_mem_map_page_table, NULL);
 
 		NODE_DATA(0)->node_mem_map = vmem_map;
-		free_area_init_node(0, &contig_page_data, zones_size,
+		free_area_init_node(0, NODE_DATA(0), zones_size,
 				    0, zholes_size);
 
 		printk("Virtual mem_map starts at 0x%p\n", mem_map);
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index b5c90e548195..a88cdb7232f8 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -421,6 +421,37 @@ static void __init memory_less_nodes(void)
 	return;
 }
 
+#ifdef CONFIG_SPARSEMEM
+/**
+ * register_sparse_mem - notify SPARSEMEM that this memory range exists.
+ * @start: physical start of range
+ * @end: physical end of range
+ * @arg: unused
+ *
+ * Simply calls SPARSEMEM to register memory section(s).
+ */
+static int __init register_sparse_mem(unsigned long start, unsigned long end,
+	void *arg)
+{
+	int nid;
+
+	start = __pa(start) >> PAGE_SHIFT;
+	end = __pa(end) >> PAGE_SHIFT;
+	nid = early_pfn_to_nid(start);
+	memory_present(nid, start, end);
+
+	return 0;
+}
+
+static void __init arch_sparse_init(void)
+{
+	efi_memmap_walk(register_sparse_mem, NULL);
+	sparse_init();
+}
+#else
+#define arch_sparse_init() do {} while (0)
+#endif
+
 /**
  * find_memory - walk the EFI memory map and setup the bootmem allocator
  *
@@ -524,12 +555,18 @@ void show_mem(void)
 	show_free_areas();
 	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 	for_each_pgdat(pgdat) {
-		unsigned long present = pgdat->node_present_pages;
+		unsigned long present;
+		unsigned long flags;
 		int shared = 0, cached = 0, reserved = 0;
+
 		printk("Node ID: %d\n", pgdat->node_id);
+		pgdat_resize_lock(pgdat, &flags);
+		present = pgdat->node_present_pages;
 		for(i = 0; i < pgdat->node_spanned_pages; i++) {
-			struct page *page = pgdat_page_nr(pgdat, i);
-			if (!ia64_pfn_valid(pgdat->node_start_pfn+i))
+			struct page *page;
+			if (pfn_valid(pgdat->node_start_pfn + i))
+				page = pfn_to_page(pgdat->node_start_pfn + i);
+			else
 				continue;
 			if (PageReserved(page))
 				reserved++;
@@ -538,6 +575,7 @@ void show_mem(void)
 			else if (page_count(page))
 				shared += page_count(page)-1;
 		}
+		pgdat_resize_unlock(pgdat, &flags);
 		total_present += present;
 		total_reserved += reserved;
 		total_cached += cached;
@@ -648,12 +686,16 @@ void __init paging_init(void)
 
 	max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
 
+	arch_sparse_init();
+
 	efi_memmap_walk(filter_rsvd_memory, count_node_pages);
 
+#ifdef CONFIG_VIRTUAL_MEM_MAP
 	vmalloc_end -= PAGE_ALIGN(max_low_pfn * sizeof(struct page));
 	vmem_map = (struct page *) vmalloc_end;
 	efi_memmap_walk(create_mem_map_page_table, NULL);
 	printk("Virtual mem_map starts at 0x%p\n", vmem_map);
+#endif
 
 	for_each_online_node(node) {
 		memset(zones_size, 0, sizeof(zones_size));
@@ -690,7 +732,9 @@ void __init paging_init(void)
 
 		pfn_offset = mem_data[node].min_pfn;
 
+#ifdef CONFIG_VIRTUAL_MEM_MAP
 		NODE_DATA(node)->node_mem_map = vmem_map + pfn_offset;
+#endif
 		free_area_init_node(node, NODE_DATA(node), zones_size,
 				    pfn_offset, zholes_size);
 	}
diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c
index 3c32af910d60..af7eb087dca7 100644
--- a/arch/ia64/mm/fault.c
+++ b/arch/ia64/mm/fault.c
@@ -20,32 +20,6 @@
 extern void die (char *, struct pt_regs *, long);
 
 /*
- * This routine is analogous to expand_stack() but instead grows the
- * register backing store (which grows towards higher addresses).
- * Since the register backing store is access sequentially, we
- * disallow growing the RBS by more than a page at a time.  Note that
- * the VM_GROWSUP flag can be set on any VM area but that's fine
- * because the total process size is still limited by RLIMIT_STACK and
- * RLIMIT_AS.
- */
-static inline long
-expand_backing_store (struct vm_area_struct *vma, unsigned long address)
-{
-	unsigned long grow;
-
-	grow = PAGE_SIZE >> PAGE_SHIFT;
-	if (address - vma->vm_start > current->signal->rlim[RLIMIT_STACK].rlim_cur
-	    || (((vma->vm_mm->total_vm + grow) << PAGE_SHIFT) > current->signal->rlim[RLIMIT_AS].rlim_cur))
-		return -ENOMEM;
-	vma->vm_end += PAGE_SIZE;
-	vma->vm_mm->total_vm += grow;
-	if (vma->vm_flags & VM_LOCKED)
-		vma->vm_mm->locked_vm += grow;
-	__vm_stat_account(vma->vm_mm, vma->vm_flags, vma->vm_file, grow);
-	return 0;
-}
-
-/*
  * Return TRUE if ADDRESS points at a page in the kernel's mapped segment
  * (inside region 5, on ia64) and that page is present.
  */
@@ -185,7 +159,13 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re
 		if (REGION_NUMBER(address) != REGION_NUMBER(vma->vm_start)
 		    || REGION_OFFSET(address) >= RGN_MAP_LIMIT)
 			goto bad_area;
-		if (expand_backing_store(vma, address))
+		/*
+		 * Since the register backing store is accessed sequentially,
+		 * we disallow growing it by more than a page at a time.
+		 */
+		if (address > vma->vm_end + PAGE_SIZE - sizeof(long))
+			goto bad_area;
+		if (expand_upwards(vma, address))
 			goto bad_area;
 	}
 	goto good_area;
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 1281c609ee98..e3215ba64ffd 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -158,7 +158,7 @@ ia64_init_addr_space (void)
 		vma->vm_start = current->thread.rbs_bot & PAGE_MASK;
 		vma->vm_end = vma->vm_start + PAGE_SIZE;
 		vma->vm_page_prot = protection_map[VM_DATA_DEFAULT_FLAGS & 0x7];
-		vma->vm_flags = VM_DATA_DEFAULT_FLAGS | VM_GROWSUP;
+		vma->vm_flags = VM_DATA_DEFAULT_FLAGS|VM_GROWSUP|VM_ACCOUNT;
 		down_write(&current->mm->mmap_sem);
 		if (insert_vm_struct(current->mm, vma)) {
 			up_write(&current->mm->mmap_sem);
@@ -275,26 +275,21 @@ put_kernel_page (struct page *page, unsigned long address, pgprot_t pgprot)
 
 	pgd = pgd_offset_k(address);		/* note: this is NOT pgd_offset()! */
 
-	spin_lock(&init_mm.page_table_lock);
 	{
 		pud = pud_alloc(&init_mm, pgd, address);
 		if (!pud)
 			goto out;
-
 		pmd = pmd_alloc(&init_mm, pud, address);
 		if (!pmd)
 			goto out;
-		pte = pte_alloc_map(&init_mm, pmd, address);
+		pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			goto out;
-		if (!pte_none(*pte)) {
-			pte_unmap(pte);
+		if (!pte_none(*pte))
 			goto out;
-		}
 		set_pte(pte, mk_pte(page, pgprot));
-		pte_unmap(pte);
 	}
-  out:	spin_unlock(&init_mm.page_table_lock);
+  out:
 	/* no need for flush_tlb */
 	return page;
 }
@@ -593,7 +588,7 @@ mem_init (void)
 	platform_dma_init();
 #endif
 
-#ifndef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_FLATMEM
 	if (!mem_map)
 		BUG();
 	max_mapnr = max_low_pfn;
diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c
index 77118bbf3d8b..4e5c8b36ad93 100644
--- a/arch/ia64/mm/numa.c
+++ b/arch/ia64/mm/numa.c
@@ -47,3 +47,27 @@ paddr_to_nid(unsigned long paddr)
 
 	return (i < num_node_memblks) ? node_memblk[i].nid : (num_node_memblks ? -1 : 0);
 }
+
+#if defined(CONFIG_SPARSEMEM) && defined(CONFIG_NUMA)
+/*
+ * Because of holes evaluate on section limits.
+ * If the section of memory exists, then return the node where the section
+ * resides.  Otherwise return node 0 as the default.  This is used by
+ * SPARSEMEM to allocate the SPARSEMEM sectionmap on the NUMA node where
+ * the section resides.
+ */
+int early_pfn_to_nid(unsigned long pfn)
+{
+	int i, section = pfn >> PFN_SECTION_SHIFT, ssec, esec;
+
+	for (i = 0; i < num_node_memblks; i++) {
+		ssec = node_memblk[i].start_paddr >> PA_SECTION_SHIFT;
+		esec = (node_memblk[i].start_paddr + node_memblk[i].size +
+			((1L << PA_SECTION_SHIFT) - 1)) >> PA_SECTION_SHIFT;
+		if (section >= ssec && section < esec)
+			return node_memblk[i].nid;
+	}
+
+	return 0;
+}
+#endif
diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c
index 464557e4ed82..c79a9b96d02b 100644
--- a/arch/ia64/mm/tlb.c
+++ b/arch/ia64/mm/tlb.c
@@ -77,19 +77,25 @@ wrap_mmu_context (struct mm_struct *mm)
 	/* can't call flush_tlb_all() here because of race condition with O(1) scheduler [EF] */
 	{
 		int cpu = get_cpu(); /* prevent preemption/migration */
-		for (i = 0; i < NR_CPUS; ++i)
-			if (cpu_online(i) && (i != cpu))
+		for_each_online_cpu(i) {
+			if (i != cpu)
 				per_cpu(ia64_need_tlb_flush, i) = 1;
+		}
 		put_cpu();
 	}
 	local_flush_tlb_all();
 }
 
 void
-ia64_global_tlb_purge (unsigned long start, unsigned long end, unsigned long nbits)
+ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start, unsigned long end, unsigned long nbits)
 {
 	static DEFINE_SPINLOCK(ptcg_lock);
 
+	if (mm != current->active_mm) {
+		flush_tlb_all();
+		return;
+	}
+
 	/* HW requires global serialization of ptc.ga.  */
 	spin_lock(&ptcg_lock);
 	{
@@ -135,15 +141,12 @@ flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long
 	unsigned long size = end - start;
 	unsigned long nbits;
 
+#ifndef CONFIG_SMP
 	if (mm != current->active_mm) {
-		/* this does happen, but perhaps it's not worth optimizing for? */
-#ifdef CONFIG_SMP
-		flush_tlb_all();
-#else
 		mm->context = 0;
-#endif
 		return;
 	}
+#endif
 
 	nbits = ia64_fls(size + 0xfff);
 	while (unlikely (((1UL << nbits) & purge.mask) == 0) && (nbits < purge.max_bits))
@@ -153,12 +156,14 @@ flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long
 	start &= ~((1UL << nbits) - 1);
 
 # ifdef CONFIG_SMP
-	platform_global_tlb_purge(start, end, nbits);
+	platform_global_tlb_purge(mm, start, end, nbits);
 # else
+	preempt_disable();
 	do {
 		ia64_ptcl(start, (nbits<<2));
 		start += (1UL << nbits);
 	} while (start < end);
+	preempt_enable();
 # endif
 
 	ia64_srlz_i();			/* srlz.i implies srlz.d */
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 9b5de589b82f..017cfc3f4789 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -120,29 +120,6 @@ struct pci_ops pci_root_ops = {
 	.write = pci_write,
 };
 
-#ifdef CONFIG_NUMA
-extern acpi_status acpi_map_iosapic(acpi_handle, u32, void *, void **);
-static void acpi_map_iosapics(void)
-{
-	acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL);
-}
-#else
-static void acpi_map_iosapics(void)
-{
-	return;
-}
-#endif /* CONFIG_NUMA */
-
-static int __init
-pci_acpi_init (void)
-{
-	acpi_map_iosapics();
-
-	return 0;
-}
-
-subsys_initcall(pci_acpi_init);
-
 /* Called by ACPI when it finds a new root bus.  */
 
 static struct pci_controller * __devinit
@@ -191,6 +168,29 @@ add_io_space (struct acpi_resource_address64 *addr)
 	return IO_SPACE_BASE(i);
 }
 
+static acpi_status __devinit resource_to_window(struct acpi_resource *resource,
+	struct acpi_resource_address64 *addr)
+{
+	acpi_status status;
+
+	/*
+	 * We're only interested in _CRS descriptors that are
+	 *	- address space descriptors for memory or I/O space
+	 *	- non-zero size
+	 *	- producers, i.e., the address space is routed downstream,
+	 *	  not consumed by the bridge itself
+	 */
+	status = acpi_resource_to_address64(resource, addr);
+	if (ACPI_SUCCESS(status) &&
+	    (addr->resource_type == ACPI_MEMORY_RANGE ||
+	     addr->resource_type == ACPI_IO_RANGE) &&
+	    addr->address_length &&
+	    addr->producer_consumer == ACPI_PRODUCER)
+		return AE_OK;
+
+	return AE_ERROR;
+}
+
 static acpi_status __devinit
 count_window (struct acpi_resource *resource, void *data)
 {
@@ -198,11 +198,9 @@ count_window (struct acpi_resource *resource, void *data)
 	struct acpi_resource_address64 addr;
 	acpi_status status;
 
-	status = acpi_resource_to_address64(resource, &addr);
+	status = resource_to_window(resource, &addr);
 	if (ACPI_SUCCESS(status))
-		if (addr.resource_type == ACPI_MEMORY_RANGE ||
-		    addr.resource_type == ACPI_IO_RANGE)
-			(*windows)++;
+		(*windows)++;
 
 	return AE_OK;
 }
@@ -221,13 +219,11 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data)
 	unsigned long flags, offset = 0;
 	struct resource *root;
 
-	status = acpi_resource_to_address64(res, &addr);
+	/* Return AE_OK for non-window resources to keep scanning for more */
+	status = resource_to_window(res, &addr);
 	if (!ACPI_SUCCESS(status))
 		return AE_OK;
 
-	if (!addr.address_length)
-		return AE_OK;
-
 	if (addr.resource_type == ACPI_MEMORY_RANGE) {
 		flags = IORESOURCE_MEM;
 		root = &iomem_resource;
diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c
index 45854c637e9c..d71f4de44f79 100644
--- a/arch/ia64/sn/kernel/bte.c
+++ b/arch/ia64/sn/kernel/bte.c
@@ -87,7 +87,7 @@ bte_result_t bte_copy(u64 src, u64 dest, u64 len, u64 mode, void *notification)
 	unsigned long irq_flags;
 	unsigned long itc_end = 0;
 	int nasid_to_try[MAX_NODES_TO_TRY];
-	int my_nasid = get_nasid();
+	int my_nasid = cpuid_to_nasid(raw_smp_processor_id());
 	int bte_if_index, nasid_index;
 	int bte_first, btes_per_node = BTES_PER_NODE;
 
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index 906622d9f933..b4f5053f5e1b 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -22,8 +22,6 @@
 #include "xtalk/hubdev.h"
 #include "xtalk/xwidgetdev.h"
 
-nasid_t master_nasid = INVALID_NASID;	/* Partition Master */
-
 static struct list_head sn_sysdata_list;
 
 /* sysdata list struct */
@@ -165,7 +163,7 @@ static void sn_fixup_ionodes(void)
 	 * Get SGI Specific HUB chipset information.
 	 * Inform Prom that this kernel can support domain bus numbering.
 	 */
-	for (i = 0; i < numionodes; i++) {
+	for (i = 0; i < num_cnodes; i++) {
 		hubdev = (struct hubdev_info *)(NODEPDA(i)->pdinfo);
 		nasid = cnodeid_to_nasid(i);
 		hubdev->max_segment_number = 0xffffffff;
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index 6f8c5883716b..0fb579ef18c2 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -59,8 +59,6 @@ DEFINE_PER_CPU(struct pda_s, pda_percpu);
 
 #define MAX_PHYS_MEMORY		(1UL << IA64_MAX_PHYS_BITS)	/* Max physical address supported */
 
-lboard_t *root_lboard[MAX_COMPACT_NODES];
-
 extern void bte_init_node(nodepda_t *, cnodeid_t);
 
 extern void sn_timer_init(void);
@@ -97,15 +95,15 @@ u8 sn_region_size;
 EXPORT_SYMBOL(sn_region_size);
 int sn_prom_type;	/* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
 
-short physical_node_map[MAX_PHYSNODE_ID];
+short physical_node_map[MAX_NUMALINK_NODES];
 static unsigned long sn_prom_features[MAX_PROM_FEATURE_SETS];
 
 EXPORT_SYMBOL(physical_node_map);
 
-int numionodes;
+int num_cnodes;
 
 static void sn_init_pdas(char **);
-static void scan_for_ionodes(void);
+static void build_cnode_tables(void);
 
 static nodepda_t *nodepdaindr[MAX_COMPACT_NODES];
 
@@ -140,19 +138,6 @@ char drive_info[4 * 16];
 #endif
 
 /*
- * Get nasid of current cpu early in boot before nodepda is initialized
- */
-static int
-boot_get_nasid(void)
-{
-	int nasid;
-
-	if (ia64_sn_get_sapic_info(get_sapicid(), &nasid, NULL, NULL))
-		BUG();
-	return nasid;
-}
-
-/*
  * This routine can only be used during init, since
  * smp_boot_data is an init data structure.
  * We have to use smp_boot_data.cpu_phys_id to find
@@ -223,7 +208,6 @@ void __init early_sn_setup(void)
 }
 
 extern int platform_intr_list[];
-extern nasid_t master_nasid;
 static int __initdata shub_1_1_found = 0;
 
 /*
@@ -269,7 +253,6 @@ static void __init sn_check_for_wars(void)
 void __init sn_setup(char **cmdline_p)
 {
 	long status, ticks_per_sec, drift;
-	int pxm;
 	u32 version = sn_sal_rev();
 	extern void sn_cpu_init(void);
 
@@ -300,11 +283,10 @@ void __init sn_setup(char **cmdline_p)
 
 	MAX_DMA_ADDRESS = PAGE_OFFSET + MAX_PHYS_MEMORY;
 
-	memset(physical_node_map, -1, sizeof(physical_node_map));
-	for (pxm = 0; pxm < MAX_PXM_DOMAINS; pxm++)
-		if (pxm_to_nid_map[pxm] != -1)
-			physical_node_map[pxm_to_nasid(pxm)] =
-			    pxm_to_nid_map[pxm];
+	/*
+	 * Build the tables for managing cnodes.
+	 */
+	build_cnode_tables();
 
 	/*
 	 * Old PROMs do not provide an ACPI FADT. Disable legacy keyboard
@@ -319,8 +301,6 @@ void __init sn_setup(char **cmdline_p)
 
 	printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF);
 
-	master_nasid = boot_get_nasid();
-
 	status =
 	    ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
 			       &drift);
@@ -378,15 +358,6 @@ static void __init sn_init_pdas(char **cmdline_p)
 {
 	cnodeid_t cnode;
 
-	memset(sn_cnodeid_to_nasid, -1,
-			sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid)));
-	for_each_online_node(cnode)
-		sn_cnodeid_to_nasid[cnode] =
-				pxm_to_nasid(nid_to_pxm_map[cnode]);
-
-	numionodes = num_online_nodes();
-	scan_for_ionodes();
-
 	/*
 	 * Allocate & initalize the nodepda for each node.
 	 */
@@ -402,7 +373,7 @@ static void __init sn_init_pdas(char **cmdline_p)
 	/*
 	 * Allocate & initialize nodepda for TIOs.  For now, put them on node 0.
 	 */
-	for (cnode = num_online_nodes(); cnode < numionodes; cnode++) {
+	for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) {
 		nodepdaindr[cnode] =
 		    alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t));
 		memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
@@ -411,7 +382,7 @@ static void __init sn_init_pdas(char **cmdline_p)
 	/*
 	 * Now copy the array of nodepda pointers to each nodepda.
 	 */
-	for (cnode = 0; cnode < numionodes; cnode++)
+	for (cnode = 0; cnode < num_cnodes; cnode++)
 		memcpy(nodepdaindr[cnode]->pernode_pdaindr, nodepdaindr,
 		       sizeof(nodepdaindr));
 
@@ -428,7 +399,7 @@ static void __init sn_init_pdas(char **cmdline_p)
 	 * Initialize the per node hubdev.  This includes IO Nodes and
 	 * headless/memless nodes.
 	 */
-	for (cnode = 0; cnode < numionodes; cnode++) {
+	for (cnode = 0; cnode < num_cnodes; cnode++) {
 		hubdev_init_node(nodepdaindr[cnode], cnode);
 	}
 }
@@ -553,87 +524,58 @@ void __init sn_cpu_init(void)
 }
 
 /*
- * Scan klconfig for ionodes.  Add the nasids to the
- * physical_node_map and the pda and increment numionodes.
+ * Build tables for converting between NASIDs and cnodes.
  */
+static inline int __init board_needs_cnode(int type)
+{
+	return (type == KLTYPE_SNIA || type == KLTYPE_TIO);
+}
 
-static void __init scan_for_ionodes(void)
+void __init build_cnode_tables(void)
 {
-	int nasid = 0;
+	int nasid;
+	int node;
 	lboard_t *brd;
 
-	/* fakeprom does not support klgraph */
-	if (IS_RUNNING_ON_FAKE_PROM())
-		return;
-
-	/* Setup ionodes with memory */
-	for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
-		char *klgraph_header;
-		cnodeid_t cnodeid;
-
-		if (physical_node_map[nasid] == -1)
-			continue;
+	memset(physical_node_map, -1, sizeof(physical_node_map));
+	memset(sn_cnodeid_to_nasid, -1,
+			sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid)));
 
-		cnodeid = -1;
-		klgraph_header = __va(ia64_sn_get_klconfig_addr(nasid));
-		if (!klgraph_header) {
-			BUG();	/* All nodes must have klconfig tables! */
-		}
-		cnodeid = nasid_to_cnodeid(nasid);
-		root_lboard[cnodeid] = (lboard_t *)
-		    NODE_OFFSET_TO_LBOARD((nasid),
-					  ((kl_config_hdr_t
-					    *) (klgraph_header))->
-					  ch_board_info);
+	/*
+	 * First populate the tables with C/M bricks. This ensures that
+	 * cnode == node for all C & M bricks.
+	 */
+	for_each_online_node(node) {
+		nasid = pxm_to_nasid(nid_to_pxm_map[node]);
+		sn_cnodeid_to_nasid[node] = nasid;
+		physical_node_map[nasid] = node;
 	}
 
-	/* Scan headless/memless IO Nodes. */
-	for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
-		/* if there's no nasid, don't try to read the klconfig on the node */
-		if (physical_node_map[nasid] == -1)
-			continue;
-		brd = find_lboard_any((lboard_t *)
-				      root_lboard[nasid_to_cnodeid(nasid)],
-				      KLTYPE_SNIA);
-		if (brd) {
-			brd = KLCF_NEXT_ANY(brd);	/* Skip this node's lboard */
-			if (!brd)
-				continue;
-		}
-
-		brd = find_lboard_any(brd, KLTYPE_SNIA);
+	/*
+	 * num_cnodes is total number of C/M/TIO bricks. Because of the 256 node
+	 * limit on the number of nodes, we can't use the generic node numbers 
+	 * for this. Note that num_cnodes is incremented below as TIOs or
+	 * headless/memoryless nodes are discovered.
+	 */
+	num_cnodes = num_online_nodes();
 
-		while (brd) {
-			sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid;
-			physical_node_map[brd->brd_nasid] = numionodes;
-			root_lboard[numionodes] = brd;
-			numionodes++;
-			brd = KLCF_NEXT_ANY(brd);
-			if (!brd)
-				break;
-
-			brd = find_lboard_any(brd, KLTYPE_SNIA);
-		}
-	}
+	/* fakeprom does not support klgraph */
+	if (IS_RUNNING_ON_FAKE_PROM())
+		return;
 
-	/* Scan for TIO nodes. */
-	for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
-		/* if there's no nasid, don't try to read the klconfig on the node */
-		if (physical_node_map[nasid] == -1)
-			continue;
-		brd = find_lboard_any((lboard_t *)
-				      root_lboard[nasid_to_cnodeid(nasid)],
-				      KLTYPE_TIO);
+	/* Find TIOs & headless/memoryless nodes and add them to the tables */
+	for_each_online_node(node) {
+		kl_config_hdr_t *klgraph_header;
+		nasid = cnodeid_to_nasid(node);
+		if ((klgraph_header = ia64_sn_get_klconfig_addr(nasid)) == NULL)
+			BUG();
+		brd = NODE_OFFSET_TO_LBOARD(nasid, klgraph_header->ch_board_info);
 		while (brd) {
-			sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid;
-			physical_node_map[brd->brd_nasid] = numionodes;
-			root_lboard[numionodes] = brd;
-			numionodes++;
-			brd = KLCF_NEXT_ANY(brd);
-			if (!brd)
-				break;
-
-			brd = find_lboard_any(brd, KLTYPE_TIO);
+			if (board_needs_cnode(brd->brd_type) && physical_node_map[brd->brd_nasid] < 0) {
+				sn_cnodeid_to_nasid[num_cnodes] = brd->brd_nasid;
+				physical_node_map[brd->brd_nasid] = num_cnodes++;
+			}
+			brd = find_lboard_next(brd);
 		}
 	}
 }
diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c
index 0a4ee50c302f..49b530c39a42 100644
--- a/arch/ia64/sn/kernel/sn2/sn2_smp.c
+++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c
@@ -177,6 +177,7 @@ void sn_tlb_migrate_finish(struct mm_struct *mm)
 
 /**
  * sn2_global_tlb_purge - globally purge translation cache of virtual address range
+ * @mm: mm_struct containing virtual address range
  * @start: start of virtual address range
  * @end: end of virtual address range
  * @nbits: specifies number of bytes to purge per instruction (num = 1<<(nbits & 0xfc))
@@ -188,21 +189,22 @@ void sn_tlb_migrate_finish(struct mm_struct *mm)
  * 	- cpu_vm_mask is a bit mask that indicates which cpus have loaded the context.
  * 	- cpu_vm_mask is converted into a nodemask of the nodes containing the
  * 	  cpus in cpu_vm_mask.
- *	- if only one bit is set in cpu_vm_mask & it is the current cpu,
- *	  then only the local TLB needs to be flushed. This flushing can be done
- *	  using ptc.l. This is the common case & avoids the global spinlock.
+ *	- if only one bit is set in cpu_vm_mask & it is the current cpu & the
+ *	  process is purging its own virtual address range, then only the
+ *	  local TLB needs to be flushed. This flushing can be done using
+ *	  ptc.l. This is the common case & avoids the global spinlock.
  *	- if multiple cpus have loaded the context, then flushing has to be
  *	  done with ptc.g/MMRs under protection of the global ptc_lock.
  */
 
 void
-sn2_global_tlb_purge(unsigned long start, unsigned long end,
-		     unsigned long nbits)
+sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start,
+		     unsigned long end, unsigned long nbits)
 {
 	int i, opt, shub1, cnode, mynasid, cpu, lcpu = 0, nasid, flushed = 0;
+	int mymm = (mm == current->active_mm);
 	volatile unsigned long *ptc0, *ptc1;
-	unsigned long itc, itc2, flags, data0 = 0, data1 = 0;
-	struct mm_struct *mm = current->active_mm;
+	unsigned long itc, itc2, flags, data0 = 0, data1 = 0, rr_value;
 	short nasids[MAX_NUMNODES], nix;
 	nodemask_t nodes_flushed;
 
@@ -216,9 +218,12 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
 		i++;
 	}
 
+	if (i == 0)
+		return;
+
 	preempt_disable();
 
-	if (likely(i == 1 && lcpu == smp_processor_id())) {
+	if (likely(i == 1 && lcpu == smp_processor_id() && mymm)) {
 		do {
 			ia64_ptcl(start, nbits << 2);
 			start += (1UL << nbits);
@@ -229,7 +234,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
 		return;
 	}
 
-	if (atomic_read(&mm->mm_users) == 1) {
+	if (atomic_read(&mm->mm_users) == 1 && mymm) {
 		flush_tlb_mm(mm);
 		__get_cpu_var(ptcstats).change_rid++;
 		preempt_enable();
@@ -241,11 +246,13 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
 	for_each_node_mask(cnode, nodes_flushed)
 		nasids[nix++] = cnodeid_to_nasid(cnode);
 
+	rr_value = (mm->context << 3) | REGION_NUMBER(start);
+
 	shub1 = is_shub1();
 	if (shub1) {
 		data0 = (1UL << SH1_PTC_0_A_SHFT) |
 		    	(nbits << SH1_PTC_0_PS_SHFT) |
-		    	((ia64_get_rr(start) >> 8) << SH1_PTC_0_RID_SHFT) |
+			(rr_value << SH1_PTC_0_RID_SHFT) |
 		    	(1UL << SH1_PTC_0_START_SHFT);
 		ptc0 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH1_PTC_0);
 		ptc1 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH1_PTC_1);
@@ -254,7 +261,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
 			(nbits << SH2_PTC_PS_SHFT) |
 		    	(1UL << SH2_PTC_START_SHFT);
 		ptc0 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH2_PTC + 
-			((ia64_get_rr(start) >> 8) << SH2_PTC_RID_SHFT) );
+			(rr_value << SH2_PTC_RID_SHFT));
 		ptc1 = NULL;
 	}
 	
@@ -275,7 +282,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
 			data0 = (data0 & ~SH2_PTC_ADDR_MASK) | (start & SH2_PTC_ADDR_MASK);
 		for (i = 0; i < nix; i++) {
 			nasid = nasids[i];
-			if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid)) {
+			if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid && mymm)) {
 				ia64_ptcga(start, nbits << 2);
 				ia64_srlz_i();
 			} else {
diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
index 0513aacac8c1..6c6fbca3229c 100644
--- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c
+++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
@@ -476,8 +476,8 @@ static int sn_topology_show(struct seq_file *s, void *d)
 				for_each_online_cpu(j) {
 					seq_printf(s, j ? ":%d" : ", dist %d",
 						node_distance(
-						    cpuid_to_cnodeid(i),
-						    cpuid_to_cnodeid(j)));
+						    cpu_to_node(i),
+						    cpu_to_node(j)));
 				}
 				seq_putc(s, '\n');
 			}
diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c
index b45db5133f55..0d8592a745a7 100644
--- a/arch/ia64/sn/kernel/tiocx.c
+++ b/arch/ia64/sn/kernel/tiocx.c
@@ -183,11 +183,12 @@ int cx_driver_unregister(struct cx_drv *cx_driver)
  * @part_num: device's part number
  * @mfg_num: device's manufacturer number
  * @hubdev: hub info associated with this device
+ * @bt: board type of the device
  *
  */
 int
 cx_device_register(nasid_t nasid, int part_num, int mfg_num,
-		   struct hubdev_info *hubdev)
+		   struct hubdev_info *hubdev, int bt)
 {
 	struct cx_dev *cx_dev;
 
@@ -200,6 +201,7 @@ cx_device_register(nasid_t nasid, int part_num, int mfg_num,
 	cx_dev->cx_id.mfg_num = mfg_num;
 	cx_dev->cx_id.nasid = nasid;
 	cx_dev->hubdev = hubdev;
+	cx_dev->bt = bt;
 
 	cx_dev->dev.parent = NULL;
 	cx_dev->dev.bus = &tiocx_bus_type;
@@ -238,7 +240,8 @@ static int cx_device_reload(struct cx_dev *cx_dev)
 {
 	cx_device_unregister(cx_dev);
 	return cx_device_register(cx_dev->cx_id.nasid, cx_dev->cx_id.part_num,
-				  cx_dev->cx_id.mfg_num, cx_dev->hubdev);
+				  cx_dev->cx_id.mfg_num, cx_dev->hubdev,
+				  cx_dev->bt);
 }
 
 static inline uint64_t tiocx_intr_alloc(nasid_t nasid, int widget,
@@ -365,26 +368,20 @@ static void tio_corelet_reset(nasid_t nasid, int corelet)
 	udelay(2000);
 }
 
-static int tiocx_btchar_get(int nasid)
+static int is_fpga_tio(int nasid, int *bt)
 {
-	moduleid_t module_id;
-	geoid_t geoid;
-	int cnodeid;
-
-	cnodeid = nasid_to_cnodeid(nasid);
-	geoid = cnodeid_get_geoid(cnodeid);
-	module_id = geo_module(geoid);
-	return MODULE_GET_BTCHAR(module_id);
-}
+	int ioboard_type;
 
-static int is_fpga_brick(int nasid)
-{
-	switch (tiocx_btchar_get(nasid)) {
+	ioboard_type = ia64_sn_sysctl_ioboard_get(nasid);
+
+	switch (ioboard_type) {
 	case L1_BRICKTYPE_SA:
 	case L1_BRICKTYPE_ATHENA:
-	case L1_BRICKTYPE_DAYTONA:
+	case L1_BOARDTYPE_DAYTONA:
+		*bt = ioboard_type;
 		return 1;
 	}
+
 	return 0;
 }
 
@@ -407,16 +404,22 @@ static int tiocx_reload(struct cx_dev *cx_dev)
 
 	if (bitstream_loaded(nasid)) {
 		uint64_t cx_id;
-
-		cx_id =
-		    *(volatile uint64_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
+		int rv;
+
+		rv = ia64_sn_sysctl_tio_clock_reset(nasid);
+		if (rv) {
+			printk(KERN_ALERT "CX port JTAG reset failed.\n");
+		} else {
+			cx_id = *(volatile uint64_t *)
+				(TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
 					  WIDGET_ID);
-		part_num = XWIDGET_PART_NUM(cx_id);
-		mfg_num = XWIDGET_MFG_NUM(cx_id);
-		DBG("part= 0x%x, mfg= 0x%x\n", part_num, mfg_num);
-		/* just ignore it if it's a CE */
-		if (part_num == TIO_CE_ASIC_PARTNUM)
-			return 0;
+			part_num = XWIDGET_PART_NUM(cx_id);
+			mfg_num = XWIDGET_MFG_NUM(cx_id);
+			DBG("part= 0x%x, mfg= 0x%x\n", part_num, mfg_num);
+			/* just ignore it if it's a CE */
+			if (part_num == TIO_CE_ASIC_PARTNUM)
+				return 0;
+		}
 	}
 
 	cx_dev->cx_id.part_num = part_num;
@@ -436,10 +439,10 @@ static ssize_t show_cxdev_control(struct device *dev, struct device_attribute *a
 {
 	struct cx_dev *cx_dev = to_cx_dev(dev);
 
-	return sprintf(buf, "0x%x 0x%x 0x%x %d\n",
+	return sprintf(buf, "0x%x 0x%x 0x%x 0x%x\n",
 		       cx_dev->cx_id.nasid,
 		       cx_dev->cx_id.part_num, cx_dev->cx_id.mfg_num,
-		       tiocx_btchar_get(cx_dev->cx_id.nasid));
+		       cx_dev->bt);
 }
 
 static ssize_t store_cxdev_control(struct device *dev, struct device_attribute *attr, const char *buf,
@@ -486,13 +489,13 @@ static int __init tiocx_init(void)
 
 	bus_register(&tiocx_bus_type);
 
-	for (cnodeid = 0; cnodeid < MAX_COMPACT_NODES; cnodeid++) {
+	for (cnodeid = 0; cnodeid < num_cnodes; cnodeid++) {
 		nasid_t nasid;
+		int bt;
 
-		if ((nasid = cnodeid_to_nasid(cnodeid)) < 0)
-			break;	/* No more nasids .. bail out of loop */
+		nasid = cnodeid_to_nasid(cnodeid);
 
-		if ((nasid & 0x1) && is_fpga_brick(nasid)) {
+		if ((nasid & 0x1) && is_fpga_tio(nasid, &bt)) {
 			struct hubdev_info *hubdev;
 			struct xwidget_info *widgetp;
 
@@ -512,7 +515,7 @@ static int __init tiocx_init(void)
 
 			if (cx_device_register
 			    (nasid, widgetp->xwi_hwid.part_num,
-			     widgetp->xwi_hwid.mfg_num, hubdev) < 0)
+			     widgetp->xwi_hwid.mfg_num, hubdev, bt) < 0)
 				return -ENXIO;
 			else
 				found_tiocx_device++;
diff --git a/arch/ia64/sn/kernel/xpc.h b/arch/ia64/sn/kernel/xpc.h
index d0ee635daf2e..fbcedc7c27fa 100644
--- a/arch/ia64/sn/kernel/xpc.h
+++ b/arch/ia64/sn/kernel/xpc.h
@@ -57,7 +57,7 @@
 #define XPC_NASID_FROM_W_B(_w, _b) (((_w) * 64 + (_b)) * 2)
 
 #define XPC_HB_DEFAULT_INTERVAL		5	/* incr HB every x secs */
-#define XPC_HB_CHECK_DEFAULT_TIMEOUT	20	/* check HB every x secs */
+#define XPC_HB_CHECK_DEFAULT_INTERVAL	20	/* check HB every x secs */
 
 /* define the process name of HB checker and the CPU it is pinned to */
 #define XPC_HB_CHECK_THREAD_NAME	"xpc_hb"
@@ -67,34 +67,82 @@
 #define XPC_DISCOVERY_THREAD_NAME	"xpc_discovery"
 
 
-#define XPC_HB_ALLOWED(_p, _v)	((_v)->heartbeating_to_mask & (1UL << (_p)))
-#define XPC_ALLOW_HB(_p, _v)	(_v)->heartbeating_to_mask |= (1UL << (_p))
-#define XPC_DISALLOW_HB(_p, _v)	(_v)->heartbeating_to_mask &= (~(1UL << (_p)))
-
-
 /*
- * Reserved Page provided by SAL.
+ * the reserved page
+ *
+ *   SAL reserves one page of memory per partition for XPC. Though a full page
+ *   in length (16384 bytes), its starting address is not page aligned, but it
+ *   is cacheline aligned. The reserved page consists of the following:
+ *
+ *   reserved page header
+ *
+ *     The first cacheline of the reserved page contains the header
+ *     (struct xpc_rsvd_page). Before SAL initialization has completed,
+ *     SAL has set up the following fields of the reserved page header:
+ *     SAL_signature, SAL_version, partid, and nasids_size. The other
+ *     fields are set up by XPC. (xpc_rsvd_page points to the local
+ *     partition's reserved page.)
  *
- * SAL provides one page per partition of reserved memory.  When SAL
- * initialization is complete, SAL_signature, SAL_version, partid,
- * part_nasids, and mach_nasids are set.
+ *   part_nasids mask
+ *   mach_nasids mask
+ *
+ *     SAL also sets up two bitmaps (or masks), one that reflects the actual
+ *     nasids in this partition (part_nasids), and the other that reflects
+ *     the actual nasids in the entire machine (mach_nasids). We're only
+ *     interested in the even numbered nasids (which contain the processors
+ *     and/or memory), so we only need half as many bits to represent the
+ *     nasids. The part_nasids mask is located starting at the first cacheline
+ *     following the reserved page header. The mach_nasids mask follows right
+ *     after the part_nasids mask. The size in bytes of each mask is reflected
+ *     by the reserved page header field 'nasids_size'. (Local partition's
+ *     mask pointers are xpc_part_nasids and xpc_mach_nasids.)
+ *
+ *   vars
+ *   vars part
+ *
+ *     Immediately following the mach_nasids mask are the XPC variables
+ *     required by other partitions. First are those that are generic to all
+ *     partitions (vars), followed on the next available cacheline by those
+ *     which are partition specific (vars part). These are setup by XPC.
+ *     (Local partition's vars pointers are xpc_vars and xpc_vars_part.)
  *
  * Note: Until vars_pa is set, the partition XPC code has not been initialized.
  */
 struct xpc_rsvd_page {
-	u64 SAL_signature;	/* SAL unique signature */
-	u64 SAL_version;	/* SAL specified version */
-	u8 partid;		/* partition ID from SAL */
+	u64 SAL_signature;	/* SAL: unique signature */
+	u64 SAL_version;	/* SAL: version */
+	u8 partid;		/* SAL: partition ID */
 	u8 version;
-	u8 pad[6];		/* pad to u64 align */
+	u8 pad1[6];		/* align to next u64 in cacheline */
 	volatile u64 vars_pa;
-	u64 part_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned;
-	u64 mach_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned;
+	struct timespec stamp;	/* time when reserved page was setup by XPC */
+	u64 pad2[9];		/* align to last u64 in cacheline */
+	u64 nasids_size;	/* SAL: size of each nasid mask in bytes */
 };
-#define XPC_RP_VERSION _XPC_VERSION(1,0) /* version 1.0 of the reserved page */
 
-#define XPC_RSVD_PAGE_ALIGNED_SIZE \
-			(L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page)))
+#define XPC_RP_VERSION _XPC_VERSION(1,1) /* version 1.1 of the reserved page */
+
+#define XPC_SUPPORTS_RP_STAMP(_version) \
+			(_version >= _XPC_VERSION(1,1))
+
+/*
+ * compare stamps - the return value is:
+ *
+ *	< 0,	if stamp1 < stamp2
+ *	= 0,	if stamp1 == stamp2
+ *	> 0,	if stamp1 > stamp2
+ */
+static inline int
+xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2)
+{
+	int ret;
+
+
+	if ((ret = stamp1->tv_sec - stamp2->tv_sec) == 0) {
+		ret = stamp1->tv_nsec - stamp2->tv_nsec;
+	}
+	return ret;
+}
 
 
 /*
@@ -121,11 +169,58 @@ struct xpc_vars {
 	u64 vars_part_pa;
 	u64 amos_page_pa;	/* paddr of page of AMOs from MSPEC driver */
 	AMO_t *amos_page;	/* vaddr of page of AMOs from MSPEC driver */
-	AMO_t *act_amos;	/* pointer to the first activation AMO */
 };
-#define XPC_V_VERSION _XPC_VERSION(3,0) /* version 3.0 of the cross vars */
 
-#define XPC_VARS_ALIGNED_SIZE  (L1_CACHE_ALIGN(sizeof(struct xpc_vars)))
+#define XPC_V_VERSION _XPC_VERSION(3,1) /* version 3.1 of the cross vars */
+
+#define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \
+			(_version >= _XPC_VERSION(3,1))
+
+
+static inline int
+xpc_hb_allowed(partid_t partid, struct xpc_vars *vars)
+{
+	return ((vars->heartbeating_to_mask & (1UL << partid)) != 0);
+}
+
+static inline void
+xpc_allow_hb(partid_t partid, struct xpc_vars *vars)
+{
+	u64 old_mask, new_mask;
+
+	do {
+		old_mask = vars->heartbeating_to_mask;
+		new_mask = (old_mask | (1UL << partid));
+	} while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
+							old_mask);
+}
+
+static inline void
+xpc_disallow_hb(partid_t partid, struct xpc_vars *vars)
+{
+	u64 old_mask, new_mask;
+
+	do {
+		old_mask = vars->heartbeating_to_mask;
+		new_mask = (old_mask & ~(1UL << partid));
+	} while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
+							old_mask);
+}
+
+
+/*
+ * The AMOs page consists of a number of AMO variables which are divided into
+ * four groups, The first two groups are used to identify an IRQ's sender.
+ * These two groups consist of 64 and 128 AMO variables respectively. The last
+ * two groups, consisting of just one AMO variable each, are used to identify
+ * the remote partitions that are currently engaged (from the viewpoint of
+ * the XPC running on the remote partition).
+ */
+#define XPC_NOTIFY_IRQ_AMOS	   0
+#define XPC_ACTIVATE_IRQ_AMOS	   (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS)
+#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS)
+#define XPC_DISENGAGE_REQUEST_AMO  (XPC_ENGAGED_PARTITIONS_AMO + 1)
+
 
 /*
  * The following structure describes the per partition specific variables.
@@ -165,6 +260,16 @@ struct xpc_vars_part {
 #define XPC_VP_MAGIC2	0x0073726176435058L  /* 'XPCvars\0'L (little endian) */
 
 
+/* the reserved page sizes and offsets */
+
+#define XPC_RP_HEADER_SIZE	L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page))
+#define XPC_RP_VARS_SIZE 	L1_CACHE_ALIGN(sizeof(struct xpc_vars))
+
+#define XPC_RP_PART_NASIDS(_rp) (u64 *) ((u8 *) _rp + XPC_RP_HEADER_SIZE)
+#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words)
+#define XPC_RP_VARS(_rp)	((struct xpc_vars *) XPC_RP_MACH_NASIDS(_rp) + xp_nasid_mask_words)
+#define XPC_RP_VARS_PART(_rp)	(struct xpc_vars_part *) ((u8 *) XPC_RP_VARS(rp) + XPC_RP_VARS_SIZE)
+
 
 /*
  * Functions registered by add_timer() or called by kernel_thread() only
@@ -349,6 +454,9 @@ struct xpc_channel {
 	atomic_t n_on_msg_allocate_wq;   /* #on msg allocation wait queue */
 	wait_queue_head_t msg_allocate_wq; /* msg allocation wait queue */
 
+	u8 delayed_IPI_flags;		/* IPI flags received, but delayed */
+					/* action until channel disconnected */
+
 	/* queue of msg senders who want to be notified when msg received */
 
 	atomic_t n_to_notify;		/* #of msg senders to notify */
@@ -358,7 +466,7 @@ struct xpc_channel {
 	void *key;			/* pointer to user's key */
 
 	struct semaphore msg_to_pull_sema; /* next msg to pull serialization */
-	struct semaphore teardown_sema;    /* wait for teardown completion */
+	struct semaphore wdisconnect_sema; /* wait for channel disconnect */
 
 	struct xpc_openclose_args *local_openclose_args; /* args passed on */
 					/* opening or closing of channel */
@@ -410,6 +518,8 @@ struct xpc_channel {
 
 #define	XPC_C_DISCONNECTED	0x00002000 /* channel is disconnected */
 #define	XPC_C_DISCONNECTING	0x00004000 /* channel is being disconnected */
+#define	XPC_C_DISCONNECTCALLOUT	0x00008000 /* chan disconnected callout made */
+#define	XPC_C_WDISCONNECT	0x00010000 /* waiting for channel disconnect */
 
 
 
@@ -422,6 +532,8 @@ struct xpc_partition {
 
 	/* XPC HB infrastructure */
 
+	u8 remote_rp_version;		/* version# of partition's rsvd pg */
+	struct timespec remote_rp_stamp;/* time when rsvd pg was initialized */
 	u64 remote_rp_pa;		/* phys addr of partition's rsvd pg */
 	u64 remote_vars_pa;		/* phys addr of partition's vars */
 	u64 remote_vars_part_pa;	/* phys addr of partition's vars part */
@@ -432,14 +544,18 @@ struct xpc_partition {
 	u32 act_IRQ_rcvd;		/* IRQs since activation */
 	spinlock_t act_lock;		/* protect updating of act_state */
 	u8 act_state;			/* from XPC HB viewpoint */
+	u8 remote_vars_version;		/* version# of partition's vars */
 	enum xpc_retval reason;		/* reason partition is deactivating */
 	int reason_line;		/* line# deactivation initiated from */
 	int reactivate_nasid;		/* nasid in partition to reactivate */
 
+	unsigned long disengage_request_timeout; /* timeout in jiffies */
+	struct timer_list disengage_request_timer;
+
 
 	/* XPC infrastructure referencing and teardown control */
 
-	volatile u8 setup_state;			/* infrastructure setup state */
+	volatile u8 setup_state;	/* infrastructure setup state */
 	wait_queue_head_t teardown_wq;	/* kthread waiting to teardown infra */
 	atomic_t references;		/* #of references to infrastructure */
 
@@ -454,6 +570,7 @@ struct xpc_partition {
 
 	u8 nchannels;		   /* #of defined channels supported */
 	atomic_t nchannels_active; /* #of channels that are not DISCONNECTED */
+	atomic_t nchannels_engaged;/* #of channels engaged with remote part */
 	struct xpc_channel *channels;/* array of channel structures */
 
 	void *local_GPs_base;	  /* base address of kmalloc'd space */
@@ -518,6 +635,7 @@ struct xpc_partition {
 #define XPC_P_TORNDOWN		0x03	/* infrastructure is torndown */
 
 
+
 /*
  * struct xpc_partition IPI_timer #of seconds to wait before checking for
  * dropped IPIs. These occur whenever an IPI amo write doesn't complete until
@@ -526,6 +644,13 @@ struct xpc_partition {
 #define XPC_P_DROPPED_IPI_WAIT	(0.25 * HZ)
 
 
+/* number of seconds to wait for other partitions to disengage */
+#define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT	90
+
+/* interval in seconds to print 'waiting disengagement' messages */
+#define XPC_DISENGAGE_PRINTMSG_INTERVAL		10
+
+
 #define XPC_PARTID(_p)	((partid_t) ((_p) - &xpc_partitions[0]))
 
 
@@ -534,24 +659,20 @@ struct xpc_partition {
 extern struct xpc_registration xpc_registrations[];
 
 
-/* >>> found in xpc_main.c only */
+/* found in xpc_main.c */
 extern struct device *xpc_part;
 extern struct device *xpc_chan;
+extern int xpc_disengage_request_timelimit;
 extern irqreturn_t xpc_notify_IRQ_handler(int, void *, struct pt_regs *);
 extern void xpc_dropped_IPI_check(struct xpc_partition *);
+extern void xpc_activate_partition(struct xpc_partition *);
 extern void xpc_activate_kthreads(struct xpc_channel *, int);
 extern void xpc_create_kthreads(struct xpc_channel *, int);
 extern void xpc_disconnect_wait(int);
 
 
-/* found in xpc_main.c and efi-xpc.c */
-extern void xpc_activate_partition(struct xpc_partition *);
-
-
 /* found in xpc_partition.c */
 extern int xpc_exiting;
-extern int xpc_hb_interval;
-extern int xpc_hb_check_interval;
 extern struct xpc_vars *xpc_vars;
 extern struct xpc_rsvd_page *xpc_rsvd_page;
 extern struct xpc_vars_part *xpc_vars_part;
@@ -561,6 +682,7 @@ extern struct xpc_rsvd_page *xpc_rsvd_page_init(void);
 extern void xpc_allow_IPI_ops(void);
 extern void xpc_restrict_IPI_ops(void);
 extern int xpc_identify_act_IRQ_sender(void);
+extern int xpc_partition_disengaged(struct xpc_partition *);
 extern enum xpc_retval xpc_mark_partition_active(struct xpc_partition *);
 extern void xpc_mark_partition_inactive(struct xpc_partition *);
 extern void xpc_discovery(void);
@@ -585,8 +707,8 @@ extern void xpc_connected_callout(struct xpc_channel *);
 extern void xpc_deliver_msg(struct xpc_channel *);
 extern void xpc_disconnect_channel(const int, struct xpc_channel *,
 					enum xpc_retval, unsigned long *);
-extern void xpc_disconnected_callout(struct xpc_channel *);
-extern void xpc_partition_down(struct xpc_partition *, enum xpc_retval);
+extern void xpc_disconnecting_callout(struct xpc_channel *);
+extern void xpc_partition_going_down(struct xpc_partition *, enum xpc_retval);
 extern void xpc_teardown_infrastructure(struct xpc_partition *);
 
 
@@ -674,6 +796,157 @@ xpc_part_ref(struct xpc_partition *part)
 
 
 /*
+ * This next set of inlines are used to keep track of when a partition is
+ * potentially engaged in accessing memory belonging to another partition.
+ */
+
+static inline void
+xpc_mark_partition_engaged(struct xpc_partition *part)
+{
+	unsigned long irq_flags;
+	AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+				(XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t)));
+
+
+	local_irq_save(irq_flags);
+
+	/* set bit corresponding to our partid in remote partition's AMO */
+	FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR,
+						(1UL << sn_partition_id));
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IPIs and AMOs to it until the heartbeat times out.
+	 */
+	(void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+				variable), xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+}
+
+static inline void
+xpc_mark_partition_disengaged(struct xpc_partition *part)
+{
+	unsigned long irq_flags;
+	AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+				(XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t)));
+
+
+	local_irq_save(irq_flags);
+
+	/* clear bit corresponding to our partid in remote partition's AMO */
+	FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+						~(1UL << sn_partition_id));
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IPIs and AMOs to it until the heartbeat times out.
+	 */
+	(void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+				variable), xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+}
+
+static inline void
+xpc_request_partition_disengage(struct xpc_partition *part)
+{
+	unsigned long irq_flags;
+	AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+				(XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
+
+
+	local_irq_save(irq_flags);
+
+	/* set bit corresponding to our partid in remote partition's AMO */
+	FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR,
+						(1UL << sn_partition_id));
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IPIs and AMOs to it until the heartbeat times out.
+	 */
+	(void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+				variable), xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+}
+
+static inline void
+xpc_cancel_partition_disengage_request(struct xpc_partition *part)
+{
+	unsigned long irq_flags;
+	AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+				(XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
+
+
+	local_irq_save(irq_flags);
+
+	/* clear bit corresponding to our partid in remote partition's AMO */
+	FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+						~(1UL << sn_partition_id));
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IPIs and AMOs to it until the heartbeat times out.
+	 */
+	(void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+				variable), xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+}
+
+static inline u64
+xpc_partition_engaged(u64 partid_mask)
+{
+	AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
+
+
+	/* return our partition's AMO variable ANDed with partid_mask */
+	return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) &
+								partid_mask);
+}
+
+static inline u64
+xpc_partition_disengage_requested(u64 partid_mask)
+{
+	AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
+
+
+	/* return our partition's AMO variable ANDed with partid_mask */
+	return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) &
+								partid_mask);
+}
+
+static inline void
+xpc_clear_partition_engaged(u64 partid_mask)
+{
+	AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
+
+
+	/* clear bit(s) based on partid_mask in our partition's AMO */
+	FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+								~partid_mask);
+}
+
+static inline void
+xpc_clear_partition_disengage_request(u64 partid_mask)
+{
+	AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
+
+
+	/* clear bit(s) based on partid_mask in our partition's AMO */
+	FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+								~partid_mask);
+}
+
+
+
+/*
  * The following set of macros and inlines are used for the sending and
  * receiving of IPIs (also known as IRQs). There are two flavors of IPIs,
  * one that is associated with partition activity (SGI_XPC_ACTIVATE) and
@@ -722,13 +995,13 @@ xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector)
  * Flag the appropriate AMO variable and send an IPI to the specified node.
  */
 static inline void
-xpc_activate_IRQ_send(u64 amos_page, int from_nasid, int to_nasid,
+xpc_activate_IRQ_send(u64 amos_page_pa, int from_nasid, int to_nasid,
 			int to_phys_cpuid)
 {
 	int w_index = XPC_NASID_W_INDEX(from_nasid);
 	int b_index = XPC_NASID_B_INDEX(from_nasid);
-	AMO_t *amos = (AMO_t *) __va(amos_page +
-					(XP_MAX_PARTITIONS * sizeof(AMO_t)));
+	AMO_t *amos = (AMO_t *) __va(amos_page_pa +
+				(XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t)));
 
 
 	(void) xpc_IPI_send(&amos[w_index], (1UL << b_index), to_nasid,
@@ -756,6 +1029,13 @@ xpc_IPI_send_reactivate(struct xpc_partition *part)
 				xpc_vars->act_nasid, xpc_vars->act_phys_cpuid);
 }
 
+static inline void
+xpc_IPI_send_disengage(struct xpc_partition *part)
+{
+	xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
+			part->remote_act_nasid, part->remote_act_phys_cpuid);
+}
+
 
 /*
  * IPIs associated with SGI_XPC_NOTIFY IRQ.
@@ -836,6 +1116,7 @@ xpc_notify_IRQ_send_local(struct xpc_channel *ch, u8 ipi_flag,
 
 /* given an AMO variable and a channel#, get its associated IPI flags */
 #define XPC_GET_IPI_FLAGS(_amo, _c)	((u8) (((_amo) >> ((_c) * 8)) & 0xff))
+#define XPC_SET_IPI_FLAGS(_amo, _c, _f)	(_amo) |= ((u64) (_f) << ((_c) * 8))
 
 #define	XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & 0x0f0f0f0f0f0f0f0f)
 #define XPC_ANY_MSG_IPI_FLAGS_SET(_amo)       ((_amo) & 0x1010101010101010)
@@ -903,17 +1184,18 @@ xpc_IPI_send_local_msgrequest(struct xpc_channel *ch)
  * cacheable mapping for the entire region. This will prevent speculative
  * reading of cached copies of our lines from being issued which will cause
  * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64
- * (XP_MAX_PARTITIONS) AMO variables for message notification (xpc_main.c)
- * and an additional 16 AMO variables for partition activation (xpc_hb.c).
+ * AMO variables (based on XP_MAX_PARTITIONS) for message notification and an
+ * additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition
+ * activation and 2 AMO variables for partition deactivation.
  */
 static inline AMO_t *
-xpc_IPI_init(partid_t partid)
+xpc_IPI_init(int index)
 {
-	AMO_t *part_amo = xpc_vars->amos_page + partid;
+	AMO_t *amo = xpc_vars->amos_page + index;
 
 
-	xpc_IPI_receive(part_amo);
-	return part_amo;
+	(void) xpc_IPI_receive(amo);	/* clear AMO variable */
+	return amo;
 }
 
 
@@ -939,7 +1221,7 @@ xpc_map_bte_errors(bte_result_t error)
 
 
 static inline void *
-xpc_kmalloc_cacheline_aligned(size_t size, int flags, void **base)
+xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
 {
 	/* see if kmalloc will give us cachline aligned memory by default */
 	*base = kmalloc(size, flags);
diff --git a/arch/ia64/sn/kernel/xpc_channel.c b/arch/ia64/sn/kernel/xpc_channel.c
index 94698bea7be0..abf4fc2a87bb 100644
--- a/arch/ia64/sn/kernel/xpc_channel.c
+++ b/arch/ia64/sn/kernel/xpc_channel.c
@@ -57,6 +57,7 @@ xpc_initialize_channels(struct xpc_partition *part, partid_t partid)
 
 		spin_lock_init(&ch->lock);
 		sema_init(&ch->msg_to_pull_sema, 1);	/* mutex */
+		sema_init(&ch->wdisconnect_sema, 0);	/* event wait */
 
 		atomic_set(&ch->n_on_msg_allocate_wq, 0);
 		init_waitqueue_head(&ch->msg_allocate_wq);
@@ -166,6 +167,7 @@ xpc_setup_infrastructure(struct xpc_partition *part)
 	xpc_initialize_channels(part, partid);
 
 	atomic_set(&part->nchannels_active, 0);
+	atomic_set(&part->nchannels_engaged, 0);
 
 
 	/* local_IPI_amo were set to 0 by an earlier memset() */
@@ -555,8 +557,6 @@ xpc_allocate_msgqueues(struct xpc_channel *ch)
 		sema_init(&ch->notify_queue[i].sema, 0);
 	}
 
-	sema_init(&ch->teardown_sema, 0);	/* event wait */
-
 	spin_lock_irqsave(&ch->lock, irq_flags);
 	ch->flags |= XPC_C_SETUP;
 	spin_unlock_irqrestore(&ch->lock, irq_flags);
@@ -626,6 +626,55 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 
 /*
+ * Notify those who wanted to be notified upon delivery of their message.
+ */
+static void
+xpc_notify_senders(struct xpc_channel *ch, enum xpc_retval reason, s64 put)
+{
+	struct xpc_notify *notify;
+	u8 notify_type;
+	s64 get = ch->w_remote_GP.get - 1;
+
+
+	while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
+
+		notify = &ch->notify_queue[get % ch->local_nentries];
+
+		/*
+		 * See if the notify entry indicates it was associated with
+		 * a message who's sender wants to be notified. It is possible
+		 * that it is, but someone else is doing or has done the
+		 * notification.
+		 */
+		notify_type = notify->type;
+		if (notify_type == 0 ||
+				cmpxchg(&notify->type, notify_type, 0) !=
+								notify_type) {
+			continue;
+		}
+
+		DBUG_ON(notify_type != XPC_N_CALL);
+
+		atomic_dec(&ch->n_to_notify);
+
+		if (notify->func != NULL) {
+			dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, "
+				"msg_number=%ld, partid=%d, channel=%d\n",
+				(void *) notify, get, ch->partid, ch->number);
+
+			notify->func(reason, ch->partid, ch->number,
+								notify->key);
+
+			dev_dbg(xpc_chan, "notify->func() returned, "
+				"notify=0x%p, msg_number=%ld, partid=%d, "
+				"channel=%d\n", (void *) notify, get,
+				ch->partid, ch->number);
+		}
+	}
+}
+
+
+/*
  * Free up message queues and other stuff that were allocated for the specified
  * channel.
  *
@@ -669,9 +718,6 @@ xpc_free_msgqueues(struct xpc_channel *ch)
 		ch->remote_msgqueue = NULL;
 		kfree(ch->notify_queue);
 		ch->notify_queue = NULL;
-
-		/* in case someone is waiting for the teardown to complete */
-		up(&ch->teardown_sema);
 	}
 }
 
@@ -683,7 +729,7 @@ static void
 xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 {
 	struct xpc_partition *part = &xpc_partitions[ch->partid];
-	u32 ch_flags = ch->flags;
+	u32 channel_was_connected = (ch->flags & XPC_C_WASCONNECTED);
 
 
 	DBUG_ON(!spin_is_locked(&ch->lock));
@@ -701,12 +747,13 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 	}
 	DBUG_ON(atomic_read(&ch->kthreads_assigned) != 0);
 
-	/* it's now safe to free the channel's message queues */
-
-	xpc_free_msgqueues(ch);
-	DBUG_ON(ch->flags & XPC_C_SETUP);
+	if (part->act_state == XPC_P_DEACTIVATING) {
+		/* can't proceed until the other side disengages from us */
+		if (xpc_partition_engaged(1UL << ch->partid)) {
+			return;
+		}
 
-	if (part->act_state != XPC_P_DEACTIVATING) {
+	} else {
 
 		/* as long as the other side is up do the full protocol */
 
@@ -724,16 +771,42 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 		}
 	}
 
+	/* wake those waiting for notify completion */
+	if (atomic_read(&ch->n_to_notify) > 0) {
+		/* >>> we do callout while holding ch->lock */
+		xpc_notify_senders(ch, ch->reason, ch->w_local_GP.put);
+	}
+
 	/* both sides are disconnected now */
 
-	ch->flags = XPC_C_DISCONNECTED;	/* clear all flags, but this one */
+	/* it's now safe to free the channel's message queues */
+	xpc_free_msgqueues(ch);
+
+	/* mark disconnected, clear all other flags except XPC_C_WDISCONNECT */
+	ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT));
 
 	atomic_dec(&part->nchannels_active);
 
-	if (ch_flags & XPC_C_WASCONNECTED) {
+	if (channel_was_connected) {
 		dev_info(xpc_chan, "channel %d to partition %d disconnected, "
 			"reason=%d\n", ch->number, ch->partid, ch->reason);
 	}
+
+	if (ch->flags & XPC_C_WDISCONNECT) {
+		spin_unlock_irqrestore(&ch->lock, *irq_flags);
+		up(&ch->wdisconnect_sema);
+		spin_lock_irqsave(&ch->lock, *irq_flags);
+
+	} else if (ch->delayed_IPI_flags) {
+		if (part->act_state != XPC_P_DEACTIVATING) {
+			/* time to take action on any delayed IPI flags */
+			spin_lock(&part->IPI_lock);
+			XPC_SET_IPI_FLAGS(part->local_IPI_amo, ch->number,
+							ch->delayed_IPI_flags);
+			spin_unlock(&part->IPI_lock);
+		}
+		ch->delayed_IPI_flags = 0;
+	}
 }
 
 
@@ -754,6 +827,19 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
 
 	spin_lock_irqsave(&ch->lock, irq_flags);
 
+again:
+
+	if ((ch->flags & XPC_C_DISCONNECTED) &&
+					(ch->flags & XPC_C_WDISCONNECT)) {
+		/*
+		 * Delay processing IPI flags until thread waiting disconnect
+		 * has had a chance to see that the channel is disconnected.
+		 */
+		ch->delayed_IPI_flags |= IPI_flags;
+		spin_unlock_irqrestore(&ch->lock, irq_flags);
+		return;
+	}
+
 
 	if (IPI_flags & XPC_IPI_CLOSEREQUEST) {
 
@@ -764,7 +850,7 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
 		/*
 		 * If RCLOSEREQUEST is set, we're probably waiting for
 		 * RCLOSEREPLY. We should find it and a ROPENREQUEST packed
-		 * with this RCLOSEQREUQEST in the IPI_flags.
+		 * with this RCLOSEREQUEST in the IPI_flags.
 		 */
 
 		if (ch->flags & XPC_C_RCLOSEREQUEST) {
@@ -779,14 +865,22 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
 
 			/* both sides have finished disconnecting */
 			xpc_process_disconnect(ch, &irq_flags);
+			DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
+			goto again;
 		}
 
 		if (ch->flags & XPC_C_DISCONNECTED) {
-			// >>> explain this section
-
 			if (!(IPI_flags & XPC_IPI_OPENREQUEST)) {
-				DBUG_ON(part->act_state !=
-							XPC_P_DEACTIVATING);
+				if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo,
+					 ch_number) & XPC_IPI_OPENREQUEST)) {
+
+					DBUG_ON(ch->delayed_IPI_flags != 0);
+					spin_lock(&part->IPI_lock);
+					XPC_SET_IPI_FLAGS(part->local_IPI_amo,
+							ch_number,
+							XPC_IPI_CLOSEREQUEST);
+					spin_unlock(&part->IPI_lock);
+				}
 				spin_unlock_irqrestore(&ch->lock, irq_flags);
 				return;
 			}
@@ -816,9 +910,13 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
 			}
 
 			XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags);
-		} else {
-			xpc_process_disconnect(ch, &irq_flags);
+
+			DBUG_ON(IPI_flags & XPC_IPI_CLOSEREPLY);
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
+			return;
 		}
+
+		xpc_process_disconnect(ch, &irq_flags);
 	}
 
 
@@ -834,7 +932,20 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
 		}
 
 		DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST));
-		DBUG_ON(!(ch->flags & XPC_C_RCLOSEREQUEST));
+
+		if (!(ch->flags & XPC_C_RCLOSEREQUEST)) {
+			if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, ch_number)
+						& XPC_IPI_CLOSEREQUEST)) {
+
+				DBUG_ON(ch->delayed_IPI_flags != 0);
+				spin_lock(&part->IPI_lock);
+				XPC_SET_IPI_FLAGS(part->local_IPI_amo,
+						ch_number, XPC_IPI_CLOSEREPLY);
+				spin_unlock(&part->IPI_lock);
+			}
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
+			return;
+		}
 
 		ch->flags |= XPC_C_RCLOSEREPLY;
 
@@ -852,8 +963,14 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
 			"channel=%d\n", args->msg_size, args->local_nentries,
 			ch->partid, ch->number);
 
-		if ((ch->flags & XPC_C_DISCONNECTING) ||
-					part->act_state == XPC_P_DEACTIVATING) {
+		if (part->act_state == XPC_P_DEACTIVATING ||
+					(ch->flags & XPC_C_ROPENREQUEST)) {
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
+			return;
+		}
+
+		if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) {
+			ch->delayed_IPI_flags |= XPC_IPI_OPENREQUEST;
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
 		}
@@ -867,8 +984,11 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
 		 *      msg_size = size of channel's messages in bytes
 		 *      local_nentries = remote partition's local_nentries
 		 */
-		DBUG_ON(args->msg_size == 0);
-		DBUG_ON(args->local_nentries == 0);
+		if (args->msg_size == 0 || args->local_nentries == 0) {
+			/* assume OPENREQUEST was delayed by mistake */
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
+			return;
+		}
 
 		ch->flags |= (XPC_C_ROPENREQUEST | XPC_C_CONNECTING);
 		ch->remote_nentries = args->local_nentries;
@@ -906,7 +1026,13 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
 		}
-		DBUG_ON(!(ch->flags & XPC_C_OPENREQUEST));
+		if (!(ch->flags & XPC_C_OPENREQUEST)) {
+			XPC_DISCONNECT_CHANNEL(ch, xpcOpenCloseError,
+								&irq_flags);
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
+			return;
+		}
+
 		DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST));
 		DBUG_ON(ch->flags & XPC_C_CONNECTED);
 
@@ -960,8 +1086,8 @@ xpc_connect_channel(struct xpc_channel *ch)
 	struct xpc_registration *registration = &xpc_registrations[ch->number];
 
 
-	if (down_interruptible(&registration->sema) != 0) {
-		return xpcInterrupted;
+	if (down_trylock(&registration->sema) != 0) {
+		return xpcRetry;
 	}
 
 	if (!XPC_CHANNEL_REGISTERED(ch->number)) {
@@ -1040,55 +1166,6 @@ xpc_connect_channel(struct xpc_channel *ch)
 
 
 /*
- * Notify those who wanted to be notified upon delivery of their message.
- */
-static void
-xpc_notify_senders(struct xpc_channel *ch, enum xpc_retval reason, s64 put)
-{
-	struct xpc_notify *notify;
-	u8 notify_type;
-	s64 get = ch->w_remote_GP.get - 1;
-
-
-	while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
-
-		notify = &ch->notify_queue[get % ch->local_nentries];
-
-		/*
-		 * See if the notify entry indicates it was associated with
-		 * a message who's sender wants to be notified. It is possible
-		 * that it is, but someone else is doing or has done the
-		 * notification.
-		 */
-		notify_type = notify->type;
-		if (notify_type == 0 ||
-				cmpxchg(&notify->type, notify_type, 0) !=
-								notify_type) {
-			continue;
-		}
-
-		DBUG_ON(notify_type != XPC_N_CALL);
-
-		atomic_dec(&ch->n_to_notify);
-
-		if (notify->func != NULL) {
-			dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, "
-				"msg_number=%ld, partid=%d, channel=%d\n",
-				(void *) notify, get, ch->partid, ch->number);
-
-			notify->func(reason, ch->partid, ch->number,
-								notify->key);
-
-			dev_dbg(xpc_chan, "notify->func() returned, "
-				"notify=0x%p, msg_number=%ld, partid=%d, "
-				"channel=%d\n", (void *) notify, get,
-				ch->partid, ch->number);
-		}
-	}
-}
-
-
-/*
  * Clear some of the msg flags in the local message queue.
  */
 static inline void
@@ -1240,6 +1317,7 @@ xpc_process_channel_activity(struct xpc_partition *part)
 	u64 IPI_amo, IPI_flags;
 	struct xpc_channel *ch;
 	int ch_number;
+	u32 ch_flags;
 
 
 	IPI_amo = xpc_get_IPI_flags(part);
@@ -1266,8 +1344,9 @@ xpc_process_channel_activity(struct xpc_partition *part)
 			xpc_process_openclose_IPI(part, ch_number, IPI_flags);
 		}
 
+		ch_flags = ch->flags;	/* need an atomic snapshot of flags */
 
-		if (ch->flags & XPC_C_DISCONNECTING) {
+		if (ch_flags & XPC_C_DISCONNECTING) {
 			spin_lock_irqsave(&ch->lock, irq_flags);
 			xpc_process_disconnect(ch, &irq_flags);
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
@@ -1278,9 +1357,9 @@ xpc_process_channel_activity(struct xpc_partition *part)
 			continue;
 		}
 
-		if (!(ch->flags & XPC_C_CONNECTED)) {
-			if (!(ch->flags & XPC_C_OPENREQUEST)) {
-				DBUG_ON(ch->flags & XPC_C_SETUP);
+		if (!(ch_flags & XPC_C_CONNECTED)) {
+			if (!(ch_flags & XPC_C_OPENREQUEST)) {
+				DBUG_ON(ch_flags & XPC_C_SETUP);
 				(void) xpc_connect_channel(ch);
 			} else {
 				spin_lock_irqsave(&ch->lock, irq_flags);
@@ -1305,8 +1384,8 @@ xpc_process_channel_activity(struct xpc_partition *part)
 
 
 /*
- * XPC's heartbeat code calls this function to inform XPC that a partition has
- * gone down.  XPC responds by tearing down the XPartition Communication
+ * XPC's heartbeat code calls this function to inform XPC that a partition is
+ * going down.  XPC responds by tearing down the XPartition Communication
  * infrastructure used for the just downed partition.
  *
  * XPC's heartbeat code will never call this function and xpc_partition_up()
@@ -1314,7 +1393,7 @@ xpc_process_channel_activity(struct xpc_partition *part)
  * at the same time.
  */
 void
-xpc_partition_down(struct xpc_partition *part, enum xpc_retval reason)
+xpc_partition_going_down(struct xpc_partition *part, enum xpc_retval reason)
 {
 	unsigned long irq_flags;
 	int ch_number;
@@ -1330,12 +1409,11 @@ xpc_partition_down(struct xpc_partition *part, enum xpc_retval reason)
 	}
 
 
-	/* disconnect all channels associated with the downed partition */
+	/* disconnect channels associated with the partition going down */
 
 	for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
 		ch = &part->channels[ch_number];
 
-
 		xpc_msgqueue_ref(ch);
 		spin_lock_irqsave(&ch->lock, irq_flags);
 
@@ -1370,6 +1448,7 @@ xpc_teardown_infrastructure(struct xpc_partition *part)
 	 * this partition.
 	 */
 
+	DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
 	DBUG_ON(atomic_read(&part->nchannels_active) != 0);
 	DBUG_ON(part->setup_state != XPC_P_SETUP);
 	part->setup_state = XPC_P_WTEARDOWN;
@@ -1428,19 +1507,11 @@ xpc_initiate_connect(int ch_number)
 		if (xpc_part_ref(part)) {
 			ch = &part->channels[ch_number];
 
-			if (!(ch->flags & XPC_C_DISCONNECTING)) {
-				DBUG_ON(ch->flags & XPC_C_OPENREQUEST);
-				DBUG_ON(ch->flags & XPC_C_CONNECTED);
-				DBUG_ON(ch->flags & XPC_C_SETUP);
-
-				/*
-				 * Initiate the establishment of a connection
-				 * on the newly registered channel to the
-				 * remote partition.
-				 */
-				xpc_wakeup_channel_mgr(part);
-			}
-
+			/*
+			 * Initiate the establishment of a connection on the
+			 * newly registered channel to the remote partition.
+			 */
+			xpc_wakeup_channel_mgr(part);
 			xpc_part_deref(part);
 		}
 	}
@@ -1450,9 +1521,6 @@ xpc_initiate_connect(int ch_number)
 void
 xpc_connected_callout(struct xpc_channel *ch)
 {
-	unsigned long irq_flags;
-
-
 	/* let the registerer know that a connection has been established */
 
 	if (ch->func != NULL) {
@@ -1465,10 +1533,6 @@ xpc_connected_callout(struct xpc_channel *ch)
 		dev_dbg(xpc_chan, "ch->func() returned, reason=xpcConnected, "
 			"partid=%d, channel=%d\n", ch->partid, ch->number);
 	}
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-	ch->flags |= XPC_C_CONNECTCALLOUT;
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
 }
 
 
@@ -1506,8 +1570,12 @@ xpc_initiate_disconnect(int ch_number)
 
 			spin_lock_irqsave(&ch->lock, irq_flags);
 
-			XPC_DISCONNECT_CHANNEL(ch, xpcUnregistering,
+			if (!(ch->flags & XPC_C_DISCONNECTED)) {
+				ch->flags |= XPC_C_WDISCONNECT;
+
+				XPC_DISCONNECT_CHANNEL(ch, xpcUnregistering,
 								&irq_flags);
+			}
 
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 
@@ -1523,8 +1591,9 @@ xpc_initiate_disconnect(int ch_number)
 /*
  * To disconnect a channel, and reflect it back to all who may be waiting.
  *
- * >>> An OPEN is not allowed until XPC_C_DISCONNECTING is cleared by
- * >>> xpc_free_msgqueues().
+ * An OPEN is not allowed until XPC_C_DISCONNECTING is cleared by
+ * xpc_process_disconnect(), and if set, XPC_C_WDISCONNECT is cleared by
+ * xpc_disconnect_wait().
  *
  * THE CHANNEL IS TO BE LOCKED BY THE CALLER AND WILL REMAIN LOCKED UPON RETURN.
  */
@@ -1532,7 +1601,7 @@ void
 xpc_disconnect_channel(const int line, struct xpc_channel *ch,
 			enum xpc_retval reason, unsigned long *irq_flags)
 {
-	u32 flags;
+	u32 channel_was_connected = (ch->flags & XPC_C_CONNECTED);
 
 
 	DBUG_ON(!spin_is_locked(&ch->lock));
@@ -1547,61 +1616,53 @@ xpc_disconnect_channel(const int line, struct xpc_channel *ch,
 
 	XPC_SET_REASON(ch, reason, line);
 
-	flags = ch->flags;
+	ch->flags |= (XPC_C_CLOSEREQUEST | XPC_C_DISCONNECTING);
 	/* some of these may not have been set */
 	ch->flags &= ~(XPC_C_OPENREQUEST | XPC_C_OPENREPLY |
 			XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY |
 			XPC_C_CONNECTING | XPC_C_CONNECTED);
 
-	ch->flags |= (XPC_C_CLOSEREQUEST | XPC_C_DISCONNECTING);
 	xpc_IPI_send_closerequest(ch, irq_flags);
 
-	if (flags & XPC_C_CONNECTED) {
+	if (channel_was_connected) {
 		ch->flags |= XPC_C_WASCONNECTED;
 	}
 
+	spin_unlock_irqrestore(&ch->lock, *irq_flags);
+
+	/* wake all idle kthreads so they can exit */
 	if (atomic_read(&ch->kthreads_idle) > 0) {
-		/* wake all idle kthreads so they can exit */
 		wake_up_all(&ch->idle_wq);
 	}
 
-	spin_unlock_irqrestore(&ch->lock, *irq_flags);
-
-
 	/* wake those waiting to allocate an entry from the local msg queue */
-
 	if (atomic_read(&ch->n_on_msg_allocate_wq) > 0) {
 		wake_up(&ch->msg_allocate_wq);
 	}
 
-	/* wake those waiting for notify completion */
-
-	if (atomic_read(&ch->n_to_notify) > 0) {
-		xpc_notify_senders(ch, reason, ch->w_local_GP.put);
-	}
-
 	spin_lock_irqsave(&ch->lock, *irq_flags);
 }
 
 
 void
-xpc_disconnected_callout(struct xpc_channel *ch)
+xpc_disconnecting_callout(struct xpc_channel *ch)
 {
 	/*
-	 * Let the channel's registerer know that the channel is now
+	 * Let the channel's registerer know that the channel is being
 	 * disconnected. We don't want to do this if the registerer was never
-	 * informed of a connection being made, unless the disconnect was for
-	 * abnormal reasons.
+	 * informed of a connection being made.
 	 */
 
 	if (ch->func != NULL) {
-		dev_dbg(xpc_chan, "ch->func() called, reason=%d, partid=%d, "
-			"channel=%d\n", ch->reason, ch->partid, ch->number);
+		dev_dbg(xpc_chan, "ch->func() called, reason=xpcDisconnecting,"
+			" partid=%d, channel=%d\n", ch->partid, ch->number);
 
-		ch->func(ch->reason, ch->partid, ch->number, NULL, ch->key);
+		ch->func(xpcDisconnecting, ch->partid, ch->number, NULL,
+								ch->key);
 
-		dev_dbg(xpc_chan, "ch->func() returned, reason=%d, partid=%d, "
-			"channel=%d\n", ch->reason, ch->partid, ch->number);
+		dev_dbg(xpc_chan, "ch->func() returned, reason="
+			"xpcDisconnecting, partid=%d, channel=%d\n",
+			ch->partid, ch->number);
 	}
 }
 
@@ -1848,7 +1909,7 @@ xpc_send_msg(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type,
 			xpc_notify_func func, void *key)
 {
 	enum xpc_retval ret = xpcSuccess;
-	struct xpc_notify *notify = NULL;   // >>> to keep the compiler happy!!
+	struct xpc_notify *notify = notify;
 	s64 put, msg_number = msg->number;
 
 
diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c
index ed7c21586e98..cece3c7c69be 100644
--- a/arch/ia64/sn/kernel/xpc_main.c
+++ b/arch/ia64/sn/kernel/xpc_main.c
@@ -54,6 +54,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/reboot.h>
 #include <asm/sn/intr.h>
 #include <asm/sn/sn_sal.h>
 #include <asm/uaccess.h>
@@ -82,11 +83,17 @@ struct device *xpc_chan = &xpc_chan_dbg_subname;
 
 /* systune related variables for /proc/sys directories */
 
-static int xpc_hb_min = 1;
-static int xpc_hb_max = 10;
+static int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL;
+static int xpc_hb_min_interval = 1;
+static int xpc_hb_max_interval = 10;
 
-static int xpc_hb_check_min = 10;
-static int xpc_hb_check_max = 120;
+static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL;
+static int xpc_hb_check_min_interval = 10;
+static int xpc_hb_check_max_interval = 120;
+
+int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT;
+static int xpc_disengage_request_min_timelimit = 0;
+static int xpc_disengage_request_max_timelimit = 120;
 
 static ctl_table xpc_sys_xpc_hb_dir[] = {
 	{
@@ -99,7 +106,8 @@ static ctl_table xpc_sys_xpc_hb_dir[] = {
 		&proc_dointvec_minmax,
 		&sysctl_intvec,
 		NULL,
-		&xpc_hb_min, &xpc_hb_max
+		&xpc_hb_min_interval,
+		&xpc_hb_max_interval
 	},
 	{
 		2,
@@ -111,7 +119,8 @@ static ctl_table xpc_sys_xpc_hb_dir[] = {
 		&proc_dointvec_minmax,
 		&sysctl_intvec,
 		NULL,
-		&xpc_hb_check_min, &xpc_hb_check_max
+		&xpc_hb_check_min_interval,
+		&xpc_hb_check_max_interval
 	},
 	{0}
 };
@@ -124,6 +133,19 @@ static ctl_table xpc_sys_xpc_dir[] = {
 		0555,
 		xpc_sys_xpc_hb_dir
 	},
+	{
+		2,
+		"disengage_request_timelimit",
+		&xpc_disengage_request_timelimit,
+		sizeof(int),
+		0644,
+		NULL,
+		&proc_dointvec_minmax,
+		&sysctl_intvec,
+		NULL,
+		&xpc_disengage_request_min_timelimit,
+		&xpc_disengage_request_max_timelimit
+	},
 	{0}
 };
 static ctl_table xpc_sys_dir[] = {
@@ -148,10 +170,10 @@ static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq);
 
 static unsigned long xpc_hb_check_timeout;
 
-/* xpc_hb_checker thread exited notification */
+/* notification that the xpc_hb_checker thread has exited */
 static DECLARE_MUTEX_LOCKED(xpc_hb_checker_exited);
 
-/* xpc_discovery thread exited notification */
+/* notification that the xpc_discovery thread has exited */
 static DECLARE_MUTEX_LOCKED(xpc_discovery_exited);
 
 
@@ -161,6 +183,30 @@ static struct timer_list xpc_hb_timer;
 static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *);
 
 
+static int xpc_system_reboot(struct notifier_block *, unsigned long, void *);
+static struct notifier_block xpc_reboot_notifier = {
+	.notifier_call = xpc_system_reboot,
+};
+
+
+/*
+ * Timer function to enforce the timelimit on the partition disengage request.
+ */
+static void
+xpc_timeout_partition_disengage_request(unsigned long data)
+{
+	struct xpc_partition *part = (struct xpc_partition *) data;
+
+
+	DBUG_ON(jiffies < part->disengage_request_timeout);
+
+	(void) xpc_partition_disengaged(part);
+
+	DBUG_ON(part->disengage_request_timeout != 0);
+	DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0);
+}
+
+
 /*
  * Notify the heartbeat check thread that an IRQ has been received.
  */
@@ -214,12 +260,6 @@ xpc_hb_checker(void *ignore)
 
 	while (!(volatile int) xpc_exiting) {
 
-		/* wait for IRQ or timeout */
-		(void) wait_event_interruptible(xpc_act_IRQ_wq,
-			    (last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) ||
-					jiffies >= xpc_hb_check_timeout ||
-						(volatile int) xpc_exiting));
-
 		dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have "
 			"been received\n",
 			(int) (xpc_hb_check_timeout - jiffies),
@@ -240,6 +280,7 @@ xpc_hb_checker(void *ignore)
 		}
 
 
+		/* check for outstanding IRQs */
 		new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd);
 		if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) {
 			force_IRQ = 0;
@@ -257,12 +298,18 @@ xpc_hb_checker(void *ignore)
 			xpc_hb_check_timeout = jiffies +
 					   (xpc_hb_check_interval * HZ);
 		}
+
+		/* wait for IRQ or timeout */
+		(void) wait_event_interruptible(xpc_act_IRQ_wq,
+			    (last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) ||
+					jiffies >= xpc_hb_check_timeout ||
+						(volatile int) xpc_exiting));
 	}
 
 	dev_dbg(xpc_part, "heartbeat checker is exiting\n");
 
 
-	/* mark this thread as inactive */
+	/* mark this thread as having exited */
 	up(&xpc_hb_checker_exited);
 	return 0;
 }
@@ -282,7 +329,7 @@ xpc_initiate_discovery(void *ignore)
 
 	dev_dbg(xpc_part, "discovery thread is exiting\n");
 
-	/* mark this thread as inactive */
+	/* mark this thread as having exited */
 	up(&xpc_discovery_exited);
 	return 0;
 }
@@ -309,7 +356,7 @@ xpc_make_first_contact(struct xpc_partition *part)
 			"partition %d\n", XPC_PARTID(part));
 
 		/* wait a 1/4 of a second or so */
-		msleep_interruptible(250);
+		(void) msleep_interruptible(250);
 
 		if (part->act_state == XPC_P_DEACTIVATING) {
 			return part->reason;
@@ -336,7 +383,8 @@ static void
 xpc_channel_mgr(struct xpc_partition *part)
 {
 	while (part->act_state != XPC_P_DEACTIVATING ||
-				atomic_read(&part->nchannels_active) > 0) {
+			atomic_read(&part->nchannels_active) > 0 ||
+					!xpc_partition_disengaged(part)) {
 
 		xpc_process_channel_activity(part);
 
@@ -360,7 +408,8 @@ xpc_channel_mgr(struct xpc_partition *part)
 				(volatile u64) part->local_IPI_amo != 0 ||
 				((volatile u8) part->act_state ==
 							XPC_P_DEACTIVATING &&
-				atomic_read(&part->nchannels_active) == 0)));
+				atomic_read(&part->nchannels_active) == 0 &&
+				xpc_partition_disengaged(part))));
 		atomic_set(&part->channel_mgr_requests, 1);
 
 		// >>> Does it need to wakeup periodically as well? In case we
@@ -482,7 +531,7 @@ xpc_activating(void *__partid)
 		return 0;
 	}
 
-	XPC_ALLOW_HB(partid, xpc_vars);
+	xpc_allow_hb(partid, xpc_vars);
 	xpc_IPI_send_activated(part);
 
 
@@ -492,6 +541,7 @@ xpc_activating(void *__partid)
 	 */
 	(void) xpc_partition_up(part);
 
+	xpc_disallow_hb(partid, xpc_vars);
 	xpc_mark_partition_inactive(part);
 
 	if (part->reason == xpcReactivating) {
@@ -670,6 +720,7 @@ xpc_daemonize_kthread(void *args)
 	struct xpc_partition *part = &xpc_partitions[partid];
 	struct xpc_channel *ch;
 	int n_needed;
+	unsigned long irq_flags;
 
 
 	daemonize("xpc%02dc%d", partid, ch_number);
@@ -680,11 +731,14 @@ xpc_daemonize_kthread(void *args)
 	ch = &part->channels[ch_number];
 
 	if (!(ch->flags & XPC_C_DISCONNECTING)) {
-		DBUG_ON(!(ch->flags & XPC_C_CONNECTED));
 
 		/* let registerer know that connection has been established */
 
-		if (atomic_read(&ch->kthreads_assigned) == 1) {
+		spin_lock_irqsave(&ch->lock, irq_flags);
+		if (!(ch->flags & XPC_C_CONNECTCALLOUT)) {
+			ch->flags |= XPC_C_CONNECTCALLOUT;
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
+
 			xpc_connected_callout(ch);
 
 			/*
@@ -699,16 +753,28 @@ xpc_daemonize_kthread(void *args)
 					!(ch->flags & XPC_C_DISCONNECTING)) {
 				xpc_activate_kthreads(ch, n_needed);
 			}
+		} else {
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
 		}
 
 		xpc_kthread_waitmsgs(part, ch);
 	}
 
-	if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
-			((ch->flags & XPC_C_CONNECTCALLOUT) ||
-				(ch->reason != xpcUnregistering &&
-					ch->reason != xpcOtherUnregistering))) {
-		xpc_disconnected_callout(ch);
+	if (atomic_dec_return(&ch->kthreads_assigned) == 0) {
+		spin_lock_irqsave(&ch->lock, irq_flags);
+		if ((ch->flags & XPC_C_CONNECTCALLOUT) &&
+				!(ch->flags & XPC_C_DISCONNECTCALLOUT)) {
+			ch->flags |= XPC_C_DISCONNECTCALLOUT;
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
+
+			xpc_disconnecting_callout(ch);
+		} else {
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
+		}
+		if (atomic_dec_return(&part->nchannels_engaged) == 0) {
+			xpc_mark_partition_disengaged(part);
+			xpc_IPI_send_disengage(part);
+		}
 	}
 
 
@@ -740,12 +806,33 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed)
 	unsigned long irq_flags;
 	pid_t pid;
 	u64 args = XPC_PACK_ARGS(ch->partid, ch->number);
+	struct xpc_partition *part = &xpc_partitions[ch->partid];
 
 
 	while (needed-- > 0) {
+
+		/*
+		 * The following is done on behalf of the newly created
+		 * kthread. That kthread is responsible for doing the
+		 * counterpart to the following before it exits.
+		 */
+		(void) xpc_part_ref(part);
+		xpc_msgqueue_ref(ch);
+		if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
+		    atomic_inc_return(&part->nchannels_engaged) == 1) {
+			xpc_mark_partition_engaged(part);
+		}
+
 		pid = kernel_thread(xpc_daemonize_kthread, (void *) args, 0);
 		if (pid < 0) {
 			/* the fork failed */
+			if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
+			    atomic_dec_return(&part->nchannels_engaged) == 0) {
+				xpc_mark_partition_disengaged(part);
+				xpc_IPI_send_disengage(part);
+			}
+			xpc_msgqueue_deref(ch);
+			xpc_part_deref(part);
 
 			if (atomic_read(&ch->kthreads_assigned) <
 						ch->kthreads_idle_limit) {
@@ -765,14 +852,6 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed)
 			break;
 		}
 
-		/*
-		 * The following is done on behalf of the newly created
-		 * kthread. That kthread is responsible for doing the
-		 * counterpart to the following before it exits.
-		 */
-		(void) xpc_part_ref(&xpc_partitions[ch->partid]);
-		xpc_msgqueue_ref(ch);
-		atomic_inc(&ch->kthreads_assigned);
 		ch->kthreads_created++;	// >>> temporary debug only!!!
 	}
 }
@@ -781,87 +860,142 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed)
 void
 xpc_disconnect_wait(int ch_number)
 {
+	unsigned long irq_flags;
 	partid_t partid;
 	struct xpc_partition *part;
 	struct xpc_channel *ch;
+	int wakeup_channel_mgr;
 
 
 	/* now wait for all callouts to the caller's function to cease */
 	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
 		part = &xpc_partitions[partid];
 
-		if (xpc_part_ref(part)) {
-			ch = &part->channels[ch_number];
+		if (!xpc_part_ref(part)) {
+			continue;
+		}
 
-// >>> how do we keep from falling into the window between our check and going
-// >>> down and coming back up where sema is re-inited?
-			if (ch->flags & XPC_C_SETUP) {
-				(void) down(&ch->teardown_sema);
-			}
+		ch = &part->channels[ch_number];
 
+		if (!(ch->flags & XPC_C_WDISCONNECT)) {
 			xpc_part_deref(part);
+			continue;
+		}
+
+		(void) down(&ch->wdisconnect_sema);
+
+		spin_lock_irqsave(&ch->lock, irq_flags);
+		DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
+		wakeup_channel_mgr = 0;
+
+		if (ch->delayed_IPI_flags) {
+			if (part->act_state != XPC_P_DEACTIVATING) {
+				spin_lock(&part->IPI_lock);
+				XPC_SET_IPI_FLAGS(part->local_IPI_amo,
+					ch->number, ch->delayed_IPI_flags);
+				spin_unlock(&part->IPI_lock);
+				wakeup_channel_mgr = 1;
+			}
+			ch->delayed_IPI_flags = 0;
 		}
+
+		ch->flags &= ~XPC_C_WDISCONNECT;
+		spin_unlock_irqrestore(&ch->lock, irq_flags);
+
+		if (wakeup_channel_mgr) {
+			xpc_wakeup_channel_mgr(part);
+		}
+
+		xpc_part_deref(part);
 	}
 }
 
 
 static void
-xpc_do_exit(void)
+xpc_do_exit(enum xpc_retval reason)
 {
 	partid_t partid;
 	int active_part_count;
 	struct xpc_partition *part;
+	unsigned long printmsg_time;
 
 
-	/* now it's time to eliminate our heartbeat */
-	del_timer_sync(&xpc_hb_timer);
-	xpc_vars->heartbeating_to_mask = 0;
-
-	/* indicate to others that our reserved page is uninitialized */
-	xpc_rsvd_page->vars_pa = 0;
-
-	/*
-	 * Ignore all incoming interrupts. Without interupts the heartbeat
-	 * checker won't activate any new partitions that may come up.
-	 */
-	free_irq(SGI_XPC_ACTIVATE, NULL);
+	/* a 'rmmod XPC' and a 'reboot' cannot both end up here together */
+	DBUG_ON(xpc_exiting == 1);
 
 	/*
-	 * Cause the heartbeat checker and the discovery threads to exit.
-	 * We don't want them attempting to activate new partitions as we
-	 * try to deactivate the existing ones.
+	 * Let the heartbeat checker thread and the discovery thread
+	 * (if one is running) know that they should exit. Also wake up
+	 * the heartbeat checker thread in case it's sleeping.
 	 */
 	xpc_exiting = 1;
 	wake_up_interruptible(&xpc_act_IRQ_wq);
 
-	/* wait for the heartbeat checker thread to mark itself inactive */
-	down(&xpc_hb_checker_exited);
+	/* ignore all incoming interrupts */
+	free_irq(SGI_XPC_ACTIVATE, NULL);
 
-	/* wait for the discovery thread to mark itself inactive */
+	/* wait for the discovery thread to exit */
 	down(&xpc_discovery_exited);
 
+	/* wait for the heartbeat checker thread to exit */
+	down(&xpc_hb_checker_exited);
 
-	msleep_interruptible(300);
+
+	/* sleep for a 1/3 of a second or so */
+	(void) msleep_interruptible(300);
 
 
 	/* wait for all partitions to become inactive */
 
+	printmsg_time = jiffies;
+
 	do {
 		active_part_count = 0;
 
 		for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
 			part = &xpc_partitions[partid];
-			if (part->act_state != XPC_P_INACTIVE) {
-				active_part_count++;
 
-				XPC_DEACTIVATE_PARTITION(part, xpcUnloading);
+			if (xpc_partition_disengaged(part) &&
+					part->act_state == XPC_P_INACTIVE) {
+				continue;
 			}
+
+			active_part_count++;
+
+			XPC_DEACTIVATE_PARTITION(part, reason);
 		}
 
-		if (active_part_count)
-			msleep_interruptible(300);
-	} while (active_part_count > 0);
+		if (active_part_count == 0) {
+			break;
+		}
 
+		if (jiffies >= printmsg_time) {
+			dev_info(xpc_part, "waiting for partitions to "
+				"deactivate/disengage, active count=%d, remote "
+				"engaged=0x%lx\n", active_part_count,
+				xpc_partition_engaged(1UL << partid));
+
+			printmsg_time = jiffies +
+					(XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
+		}
+
+		/* sleep for a 1/3 of a second or so */
+		(void) msleep_interruptible(300);
+
+	} while (1);
+
+	DBUG_ON(xpc_partition_engaged(-1UL));
+
+
+	/* indicate to others that our reserved page is uninitialized */
+	xpc_rsvd_page->vars_pa = 0;
+
+	/* now it's time to eliminate our heartbeat */
+	del_timer_sync(&xpc_hb_timer);
+	DBUG_ON(xpc_vars->heartbeating_to_mask != 0);
+
+	/* take ourselves off of the reboot_notifier_list */
+	(void) unregister_reboot_notifier(&xpc_reboot_notifier);
 
 	/* close down protections for IPI operations */
 	xpc_restrict_IPI_ops();
@@ -876,6 +1010,34 @@ xpc_do_exit(void)
 }
 
 
+/*
+ * This function is called when the system is being rebooted.
+ */
+static int
+xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
+{
+	enum xpc_retval reason;
+
+
+	switch (event) {
+	case SYS_RESTART:
+		reason = xpcSystemReboot;
+		break;
+	case SYS_HALT:
+		reason = xpcSystemHalt;
+		break;
+	case SYS_POWER_OFF:
+		reason = xpcSystemPoweroff;
+		break;
+	default:
+		reason = xpcSystemGoingDown;
+	}
+
+	xpc_do_exit(reason);
+	return NOTIFY_DONE;
+}
+
+
 int __init
 xpc_init(void)
 {
@@ -891,11 +1053,11 @@ xpc_init(void)
 
 	/*
 	 * xpc_remote_copy_buffer is used as a temporary buffer for bte_copy'ng
-	 * both a partition's reserved page and its XPC variables. Its size was
-	 * based on the size of a reserved page. So we need to ensure that the
-	 * XPC variables will fit as well.
+	 * various portions of a partition's reserved page. Its size is based
+	 * on the size of the reserved page header and part_nasids mask. So we
+	 * need to ensure that the other items will fit as well.
 	 */
-	if (XPC_VARS_ALIGNED_SIZE > XPC_RSVD_PAGE_ALIGNED_SIZE) {
+	if (XPC_RP_VARS_SIZE > XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES) {
 		dev_err(xpc_part, "xpc_remote_copy_buffer is not big enough\n");
 		return -EPERM;
 	}
@@ -924,6 +1086,12 @@ xpc_init(void)
 		spin_lock_init(&part->act_lock);
 		part->act_state = XPC_P_INACTIVE;
 		XPC_SET_REASON(part, 0, 0);
+
+		init_timer(&part->disengage_request_timer);
+		part->disengage_request_timer.function =
+				xpc_timeout_partition_disengage_request;
+		part->disengage_request_timer.data = (unsigned long) part;
+
 		part->setup_state = XPC_P_UNSET;
 		init_waitqueue_head(&part->teardown_wq);
 		atomic_set(&part->references, 0);
@@ -980,6 +1148,13 @@ xpc_init(void)
 	}
 
 
+	/* add ourselves to the reboot_notifier_list */
+	ret = register_reboot_notifier(&xpc_reboot_notifier);
+	if (ret != 0) {
+		dev_warn(xpc_part, "can't register reboot notifier\n");
+	}
+
+
 	/*
 	 * Set the beating to other partitions into motion.  This is
 	 * the last requirement for other partitions' discovery to
@@ -1001,6 +1176,9 @@ xpc_init(void)
 		/* indicate to others that our reserved page is uninitialized */
 		xpc_rsvd_page->vars_pa = 0;
 
+		/* take ourselves off of the reboot_notifier_list */
+		(void) unregister_reboot_notifier(&xpc_reboot_notifier);
+
 		del_timer_sync(&xpc_hb_timer);
 		free_irq(SGI_XPC_ACTIVATE, NULL);
 		xpc_restrict_IPI_ops();
@@ -1024,7 +1202,7 @@ xpc_init(void)
 		/* mark this new thread as a non-starter */
 		up(&xpc_discovery_exited);
 
-		xpc_do_exit();
+		xpc_do_exit(xpcUnloading);
 		return -EBUSY;
 	}
 
@@ -1043,7 +1221,7 @@ module_init(xpc_init);
 void __exit
 xpc_exit(void)
 {
-	xpc_do_exit();
+	xpc_do_exit(xpcUnloading);
 }
 module_exit(xpc_exit);
 
@@ -1060,3 +1238,7 @@ module_param(xpc_hb_check_interval, int, 0);
 MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between "
 		"heartbeat checks.");
 
+module_param(xpc_disengage_request_timelimit, int, 0);
+MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait "
+		"for disengage request to complete.");
+
diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c
index 578265ea9e67..581e113d2d37 100644
--- a/arch/ia64/sn/kernel/xpc_partition.c
+++ b/arch/ia64/sn/kernel/xpc_partition.c
@@ -44,16 +44,19 @@ static u64 xpc_sh2_IPI_access3;
 
 
 /* original protection values for each node */
-u64 xpc_prot_vec[MAX_COMPACT_NODES];
+u64 xpc_prot_vec[MAX_NUMNODES];
 
 
-/* this partition's reserved page */
+/* this partition's reserved page pointers */
 struct xpc_rsvd_page *xpc_rsvd_page;
-
-/* this partition's XPC variables (within the reserved page) */
+static u64 *xpc_part_nasids;
+static u64 *xpc_mach_nasids;
 struct xpc_vars *xpc_vars;
 struct xpc_vars_part *xpc_vars_part;
 
+static int xp_nasid_mask_bytes;	/* actual size in bytes of nasid mask */
+static int xp_nasid_mask_words;	/* actual size in words of nasid mask */
+
 
 /*
  * For performance reasons, each entry of xpc_partitions[] is cacheline
@@ -65,20 +68,16 @@ struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
 
 
 /*
- * Generic buffer used to store a local copy of the remote partitions
- * reserved page or XPC variables.
+ * Generic buffer used to store a local copy of portions of a remote
+ * partition's reserved page (either its header and part_nasids mask,
+ * or its vars).
  *
  * xpc_discovery runs only once and is a seperate thread that is
  * very likely going to be processing in parallel with receiving
  * interrupts.
  */
-char ____cacheline_aligned
-		xpc_remote_copy_buffer[XPC_RSVD_PAGE_ALIGNED_SIZE];
-
-
-/* systune related variables */
-int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL;
-int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_TIMEOUT;
+char ____cacheline_aligned xpc_remote_copy_buffer[XPC_RP_HEADER_SIZE +
+							XP_NASID_MASK_BYTES];
 
 
 /*
@@ -86,13 +85,16 @@ int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_TIMEOUT;
  * for that nasid. This function returns 0 on any error.
  */
 static u64
-xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size)
+xpc_get_rsvd_page_pa(int nasid)
 {
 	bte_result_t bte_res;
 	s64 status;
 	u64 cookie = 0;
 	u64 rp_pa = nasid;	/* seed with nasid */
 	u64 len = 0;
+	u64 buf = buf;
+	u64 buf_len = 0;
+	void *buf_base = NULL;
 
 
 	while (1) {
@@ -108,13 +110,22 @@ xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size)
 			break;
 		}
 
-		if (len > buf_size) {
-			dev_err(xpc_part, "len (=0x%016lx) > buf_size\n", len);
-			status = SALRET_ERROR;
-			break;
+		if (L1_CACHE_ALIGN(len) > buf_len) {
+			if (buf_base != NULL) {
+				kfree(buf_base);
+			}
+			buf_len = L1_CACHE_ALIGN(len);
+			buf = (u64) xpc_kmalloc_cacheline_aligned(buf_len,
+							GFP_KERNEL, &buf_base);
+			if (buf_base == NULL) {
+				dev_err(xpc_part, "unable to kmalloc "
+					"len=0x%016lx\n", buf_len);
+				status = SALRET_ERROR;
+				break;
+			}
 		}
 
-		bte_res = xp_bte_copy(rp_pa, ia64_tpa(buf), buf_size,
+		bte_res = xp_bte_copy(rp_pa, ia64_tpa(buf), buf_len,
 					(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 		if (bte_res != BTE_SUCCESS) {
 			dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res);
@@ -123,6 +134,10 @@ xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size)
 		}
 	}
 
+	if (buf_base != NULL) {
+		kfree(buf_base);
+	}
+
 	if (status != SALRET_OK) {
 		rp_pa = 0;
 	}
@@ -141,15 +156,15 @@ xpc_rsvd_page_init(void)
 {
 	struct xpc_rsvd_page *rp;
 	AMO_t *amos_page;
-	u64 rp_pa, next_cl, nasid_array = 0;
+	u64 rp_pa, nasid_array = 0;
 	int i, ret;
 
 
 	/* get the local reserved page's address */
 
-	rp_pa = xpc_get_rsvd_page_pa(cnodeid_to_nasid(0),
-					(u64) xpc_remote_copy_buffer,
-						XPC_RSVD_PAGE_ALIGNED_SIZE);
+	preempt_disable();
+	rp_pa = xpc_get_rsvd_page_pa(cpuid_to_nasid(smp_processor_id()));
+	preempt_enable();
 	if (rp_pa == 0) {
 		dev_err(xpc_part, "SAL failed to locate the reserved page\n");
 		return NULL;
@@ -164,12 +179,19 @@ xpc_rsvd_page_init(void)
 
 	rp->version = XPC_RP_VERSION;
 
-	/*
-	 * Place the XPC variables on the cache line following the
-	 * reserved page structure.
-	 */
-	next_cl = (u64) rp + XPC_RSVD_PAGE_ALIGNED_SIZE;
-	xpc_vars = (struct xpc_vars *) next_cl;
+	/* establish the actual sizes of the nasid masks */
+	if (rp->SAL_version == 1) {
+		/* SAL_version 1 didn't set the nasids_size field */
+		rp->nasids_size = 128;
+	}
+	xp_nasid_mask_bytes = rp->nasids_size;
+	xp_nasid_mask_words = xp_nasid_mask_bytes / 8;
+
+	/* setup the pointers to the various items in the reserved page */
+	xpc_part_nasids = XPC_RP_PART_NASIDS(rp);
+	xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp);
+	xpc_vars = XPC_RP_VARS(rp);
+	xpc_vars_part = XPC_RP_VARS_PART(rp);
 
 	/*
 	 * Before clearing xpc_vars, see if a page of AMOs had been previously
@@ -221,33 +243,32 @@ xpc_rsvd_page_init(void)
 		amos_page = (AMO_t *) TO_AMO((u64) amos_page);
 	}
 
+	/* clear xpc_vars */
 	memset(xpc_vars, 0, sizeof(struct xpc_vars));
 
-	/*
-	 * Place the XPC per partition specific variables on the cache line
-	 * following the XPC variables structure.
-	 */
-	next_cl += XPC_VARS_ALIGNED_SIZE;
-	memset((u64 *) next_cl, 0, sizeof(struct xpc_vars_part) *
-							XP_MAX_PARTITIONS);
-	xpc_vars_part = (struct xpc_vars_part *) next_cl;
-	xpc_vars->vars_part_pa = __pa(next_cl);
-
 	xpc_vars->version = XPC_V_VERSION;
 	xpc_vars->act_nasid = cpuid_to_nasid(0);
 	xpc_vars->act_phys_cpuid = cpu_physical_id(0);
+	xpc_vars->vars_part_pa = __pa(xpc_vars_part);
+	xpc_vars->amos_page_pa = ia64_tpa((u64) amos_page);
 	xpc_vars->amos_page = amos_page;  /* save for next load of XPC */
 
 
-	/*
-	 * Initialize the activation related AMO variables.
-	 */
-	xpc_vars->act_amos = xpc_IPI_init(XP_MAX_PARTITIONS);
-	for (i = 1; i < XP_NASID_MASK_WORDS; i++) {
-		xpc_IPI_init(i + XP_MAX_PARTITIONS);
+	/* clear xpc_vars_part */
+	memset((u64 *) xpc_vars_part, 0, sizeof(struct xpc_vars_part) *
+							XP_MAX_PARTITIONS);
+
+	/* initialize the activate IRQ related AMO variables */
+	for (i = 0; i < xp_nasid_mask_words; i++) {
+		(void) xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i);
 	}
-	/* export AMO page's physical address to other partitions */
-	xpc_vars->amos_page_pa = ia64_tpa((u64) xpc_vars->amos_page);
+
+	/* initialize the engaged remote partitions related AMO variables */
+	(void) xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO);
+	(void) xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO);
+
+	/* timestamp of when reserved page was setup by XPC */
+	rp->stamp = CURRENT_TIME;
 
 	/*
 	 * This signifies to the remote partition that our reserved
@@ -387,6 +408,11 @@ xpc_check_remote_hb(void)
 	remote_vars = (struct xpc_vars *) xpc_remote_copy_buffer;
 
 	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+
+		if (xpc_exiting) {
+			break;
+		}
+
 		if (partid == sn_partition_id) {
 			continue;
 		}
@@ -401,7 +427,7 @@ xpc_check_remote_hb(void)
 		/* pull the remote_hb cache line */
 		bres = xp_bte_copy(part->remote_vars_pa,
 					ia64_tpa((u64) remote_vars),
-					XPC_VARS_ALIGNED_SIZE,
+					XPC_RP_VARS_SIZE,
 					(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 		if (bres != BTE_SUCCESS) {
 			XPC_DEACTIVATE_PARTITION(part,
@@ -417,7 +443,7 @@ xpc_check_remote_hb(void)
 
 		if (((remote_vars->heartbeat == part->last_heartbeat) &&
 			(remote_vars->kdb_status == 0)) ||
-			     !XPC_HB_ALLOWED(sn_partition_id, remote_vars)) {
+			     !xpc_hb_allowed(sn_partition_id, remote_vars)) {
 
 			XPC_DEACTIVATE_PARTITION(part, xpcNoHeartbeat);
 			continue;
@@ -429,31 +455,31 @@ xpc_check_remote_hb(void)
 
 
 /*
- * Get a copy of the remote partition's rsvd page.
+ * Get a copy of a portion of the remote partition's rsvd page.
  *
  * remote_rp points to a buffer that is cacheline aligned for BTE copies and
- * assumed to be of size XPC_RSVD_PAGE_ALIGNED_SIZE.
+ * is large enough to contain a copy of their reserved page header and
+ * part_nasids mask.
  */
 static enum xpc_retval
 xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
-		struct xpc_rsvd_page *remote_rp, u64 *remote_rsvd_page_pa)
+		struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa)
 {
 	int bres, i;
 
 
 	/* get the reserved page's physical address */
 
-	*remote_rsvd_page_pa = xpc_get_rsvd_page_pa(nasid, (u64) remote_rp,
-						XPC_RSVD_PAGE_ALIGNED_SIZE);
-	if (*remote_rsvd_page_pa == 0) {
+	*remote_rp_pa = xpc_get_rsvd_page_pa(nasid);
+	if (*remote_rp_pa == 0) {
 		return xpcNoRsvdPageAddr;
 	}
 
 
-	/* pull over the reserved page structure */
+	/* pull over the reserved page header and part_nasids mask */
 
-	bres = xp_bte_copy(*remote_rsvd_page_pa, ia64_tpa((u64) remote_rp),
-				XPC_RSVD_PAGE_ALIGNED_SIZE,
+	bres = xp_bte_copy(*remote_rp_pa, ia64_tpa((u64) remote_rp),
+				XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes,
 				(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 	if (bres != BTE_SUCCESS) {
 		return xpc_map_bte_errors(bres);
@@ -461,8 +487,11 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
 
 
 	if (discovered_nasids != NULL) {
-		for (i = 0; i < XP_NASID_MASK_WORDS; i++) {
-			discovered_nasids[i] |= remote_rp->part_nasids[i];
+		u64 *remote_part_nasids = XPC_RP_PART_NASIDS(remote_rp);
+
+
+		for (i = 0; i < xp_nasid_mask_words; i++) {
+			discovered_nasids[i] |= remote_part_nasids[i];
 		}
 	}
 
@@ -489,10 +518,10 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
 
 
 /*
- * Get a copy of the remote partition's XPC variables.
+ * Get a copy of the remote partition's XPC variables from the reserved page.
  *
  * remote_vars points to a buffer that is cacheline aligned for BTE copies and
- * assumed to be of size XPC_VARS_ALIGNED_SIZE.
+ * assumed to be of size XPC_RP_VARS_SIZE.
  */
 static enum xpc_retval
 xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
@@ -508,7 +537,7 @@ xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
 	/* pull over the cross partition variables */
 
 	bres = xp_bte_copy(remote_vars_pa, ia64_tpa((u64) remote_vars),
-				XPC_VARS_ALIGNED_SIZE,
+				XPC_RP_VARS_SIZE,
 				(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 	if (bres != BTE_SUCCESS) {
 		return xpc_map_bte_errors(bres);
@@ -524,7 +553,56 @@ xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
 
 
 /*
- * Prior code has determine the nasid which generated an IPI.  Inspect
+ * Update the remote partition's info.
+ */
+static void
+xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version,
+		struct timespec *remote_rp_stamp, u64 remote_rp_pa,
+		u64 remote_vars_pa, struct xpc_vars *remote_vars)
+{
+	part->remote_rp_version = remote_rp_version;
+	dev_dbg(xpc_part, "  remote_rp_version = 0x%016lx\n",
+		part->remote_rp_version);
+
+	part->remote_rp_stamp = *remote_rp_stamp;
+	dev_dbg(xpc_part, "  remote_rp_stamp (tv_sec = 0x%lx tv_nsec = 0x%lx\n",
+		part->remote_rp_stamp.tv_sec, part->remote_rp_stamp.tv_nsec);
+
+	part->remote_rp_pa = remote_rp_pa;
+	dev_dbg(xpc_part, "  remote_rp_pa = 0x%016lx\n", part->remote_rp_pa);
+
+	part->remote_vars_pa = remote_vars_pa;
+	dev_dbg(xpc_part, "  remote_vars_pa = 0x%016lx\n",
+		part->remote_vars_pa);
+
+	part->last_heartbeat = remote_vars->heartbeat;
+	dev_dbg(xpc_part, "  last_heartbeat = 0x%016lx\n",
+		part->last_heartbeat);
+
+	part->remote_vars_part_pa = remote_vars->vars_part_pa;
+	dev_dbg(xpc_part, "  remote_vars_part_pa = 0x%016lx\n",
+		part->remote_vars_part_pa);
+
+	part->remote_act_nasid = remote_vars->act_nasid;
+	dev_dbg(xpc_part, "  remote_act_nasid = 0x%x\n",
+		part->remote_act_nasid);
+
+	part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid;
+	dev_dbg(xpc_part, "  remote_act_phys_cpuid = 0x%x\n",
+		part->remote_act_phys_cpuid);
+
+	part->remote_amos_page_pa = remote_vars->amos_page_pa;
+	dev_dbg(xpc_part, "  remote_amos_page_pa = 0x%lx\n",
+		part->remote_amos_page_pa);
+
+	part->remote_vars_version = remote_vars->version;
+	dev_dbg(xpc_part, "  remote_vars_version = 0x%x\n",
+		part->remote_vars_version);
+}
+
+
+/*
+ * Prior code has determined the nasid which generated an IPI.  Inspect
  * that nasid to determine if its partition needs to be activated or
  * deactivated.
  *
@@ -542,8 +620,12 @@ xpc_identify_act_IRQ_req(int nasid)
 {
 	struct xpc_rsvd_page *remote_rp;
 	struct xpc_vars *remote_vars;
-	u64 remote_rsvd_page_pa;
+	u64 remote_rp_pa;
 	u64 remote_vars_pa;
+	int remote_rp_version;
+	int reactivate = 0;
+	int stamp_diff;
+	struct timespec remote_rp_stamp = { 0, 0 };
 	partid_t partid;
 	struct xpc_partition *part;
 	enum xpc_retval ret;
@@ -553,7 +635,7 @@ xpc_identify_act_IRQ_req(int nasid)
 
 	remote_rp = (struct xpc_rsvd_page *) xpc_remote_copy_buffer;
 
-	ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rsvd_page_pa);
+	ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa);
 	if (ret != xpcSuccess) {
 		dev_warn(xpc_part, "unable to get reserved page from nasid %d, "
 			"which sent interrupt, reason=%d\n", nasid, ret);
@@ -561,6 +643,10 @@ xpc_identify_act_IRQ_req(int nasid)
 	}
 
 	remote_vars_pa = remote_rp->vars_pa;
+	remote_rp_version = remote_rp->version;
+	if (XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
+		remote_rp_stamp = remote_rp->stamp;
+	}
 	partid = remote_rp->partid;
 	part = &xpc_partitions[partid];
 
@@ -586,44 +672,117 @@ xpc_identify_act_IRQ_req(int nasid)
 		"%ld:0x%lx\n", (int) nasid, (int) partid, part->act_IRQ_rcvd,
 		remote_vars->heartbeat, remote_vars->heartbeating_to_mask);
 
+	if (xpc_partition_disengaged(part) &&
+					part->act_state == XPC_P_INACTIVE) {
 
-	if (part->act_state == XPC_P_INACTIVE) {
+		xpc_update_partition_info(part, remote_rp_version,
+					&remote_rp_stamp, remote_rp_pa,
+					remote_vars_pa, remote_vars);
 
-		part->remote_rp_pa = remote_rsvd_page_pa;
-		dev_dbg(xpc_part, "  remote_rp_pa = 0x%016lx\n",
-			part->remote_rp_pa);
+		if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
+			if (xpc_partition_disengage_requested(1UL << partid)) {
+				/*
+				 * Other side is waiting on us to disengage,
+				 * even though we already have.
+				 */
+				return;
+			}
+		} else {
+			/* other side doesn't support disengage requests */
+			xpc_clear_partition_disengage_request(1UL << partid);
+		}
 
-		part->remote_vars_pa = remote_vars_pa;
-		dev_dbg(xpc_part, "  remote_vars_pa = 0x%016lx\n",
-			part->remote_vars_pa);
+		xpc_activate_partition(part);
+		return;
+	}
 
-		part->last_heartbeat = remote_vars->heartbeat;
-		dev_dbg(xpc_part, "  last_heartbeat = 0x%016lx\n",
-			part->last_heartbeat);
+	DBUG_ON(part->remote_rp_version == 0);
+	DBUG_ON(part->remote_vars_version == 0);
+
+	if (!XPC_SUPPORTS_RP_STAMP(part->remote_rp_version)) {
+		DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(part->
+							remote_vars_version));
+
+		if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
+			DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
+								version));
+			/* see if the other side rebooted */
+			if (part->remote_amos_page_pa ==
+				remote_vars->amos_page_pa &&
+					xpc_hb_allowed(sn_partition_id,
+								remote_vars)) {
+				/* doesn't look that way, so ignore the IPI */
+				return;
+			}
+		}
 
-		part->remote_vars_part_pa = remote_vars->vars_part_pa;
-		dev_dbg(xpc_part, "  remote_vars_part_pa = 0x%016lx\n",
-			part->remote_vars_part_pa);
+		/*
+		 * Other side rebooted and previous XPC didn't support the
+		 * disengage request, so we don't need to do anything special.
+		 */
 
-		part->remote_act_nasid = remote_vars->act_nasid;
-		dev_dbg(xpc_part, "  remote_act_nasid = 0x%x\n",
-			part->remote_act_nasid);
+		xpc_update_partition_info(part, remote_rp_version,
+						&remote_rp_stamp, remote_rp_pa,
+						remote_vars_pa, remote_vars);
+		part->reactivate_nasid = nasid;
+		XPC_DEACTIVATE_PARTITION(part, xpcReactivating);
+		return;
+	}
 
-		part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid;
-		dev_dbg(xpc_part, "  remote_act_phys_cpuid = 0x%x\n",
-			part->remote_act_phys_cpuid);
+	DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version));
 
-		part->remote_amos_page_pa = remote_vars->amos_page_pa;
-		dev_dbg(xpc_part, "  remote_amos_page_pa = 0x%lx\n",
-			part->remote_amos_page_pa);
+	if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
+		DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
 
-		xpc_activate_partition(part);
+		/*
+		 * Other side rebooted and previous XPC did support the
+		 * disengage request, but the new one doesn't.
+		 */
+
+		xpc_clear_partition_engaged(1UL << partid);
+		xpc_clear_partition_disengage_request(1UL << partid);
 
-	} else if (part->remote_amos_page_pa != remote_vars->amos_page_pa ||
-			!XPC_HB_ALLOWED(sn_partition_id, remote_vars)) {
+		xpc_update_partition_info(part, remote_rp_version,
+						&remote_rp_stamp, remote_rp_pa,
+						remote_vars_pa, remote_vars);
+		reactivate = 1;
+
+	} else {
+		DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
 
+		stamp_diff = xpc_compare_stamps(&part->remote_rp_stamp,
+							&remote_rp_stamp);
+		if (stamp_diff != 0) {
+			DBUG_ON(stamp_diff >= 0);
+
+			/*
+			 * Other side rebooted and the previous XPC did support
+			 * the disengage request, as does the new one.
+			 */
+
+			DBUG_ON(xpc_partition_engaged(1UL << partid));
+			DBUG_ON(xpc_partition_disengage_requested(1UL <<
+								partid));
+
+			xpc_update_partition_info(part, remote_rp_version,
+						&remote_rp_stamp, remote_rp_pa,
+						remote_vars_pa, remote_vars);
+			reactivate = 1;
+		}
+	}
+
+	if (!xpc_partition_disengaged(part)) {
+		/* still waiting on other side to disengage from us */
+		return;
+	}
+
+	if (reactivate) {
 		part->reactivate_nasid = nasid;
 		XPC_DEACTIVATE_PARTITION(part, xpcReactivating);
+
+	} else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) &&
+			xpc_partition_disengage_requested(1UL << partid)) {
+		XPC_DEACTIVATE_PARTITION(part, xpcOtherGoingDown);
 	}
 }
 
@@ -643,14 +802,17 @@ xpc_identify_act_IRQ_sender(void)
 	u64 nasid;			/* remote nasid */
 	int n_IRQs_detected = 0;
 	AMO_t *act_amos;
-	struct xpc_rsvd_page *rp = (struct xpc_rsvd_page *) xpc_rsvd_page;
 
 
-	act_amos = xpc_vars->act_amos;
+	act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS;
 
 
 	/* scan through act AMO variable looking for non-zero entries */
-	for (word = 0; word < XP_NASID_MASK_WORDS; word++) {
+	for (word = 0; word < xp_nasid_mask_words; word++) {
+
+		if (xpc_exiting) {
+			break;
+		}
 
 		nasid_mask = xpc_IPI_receive(&act_amos[word]);
 		if (nasid_mask == 0) {
@@ -668,7 +830,7 @@ xpc_identify_act_IRQ_sender(void)
 		 * remote nasid in our reserved pages machine mask.
 		 * This is used in the event of module reload.
 		 */
-		rp->mach_nasids[word] |= nasid_mask;
+		xpc_mach_nasids[word] |= nasid_mask;
 
 
 		/* locate the nasid(s) which sent interrupts */
@@ -688,6 +850,55 @@ xpc_identify_act_IRQ_sender(void)
 
 
 /*
+ * See if the other side has responded to a partition disengage request
+ * from us.
+ */
+int
+xpc_partition_disengaged(struct xpc_partition *part)
+{
+	partid_t partid = XPC_PARTID(part);
+	int disengaged;
+
+
+	disengaged = (xpc_partition_engaged(1UL << partid) == 0);
+	if (part->disengage_request_timeout) {
+		if (!disengaged) {
+			if (jiffies < part->disengage_request_timeout) {
+				/* timelimit hasn't been reached yet */
+				return 0;
+			}
+
+			/*
+			 * Other side hasn't responded to our disengage
+			 * request in a timely fashion, so assume it's dead.
+			 */
+
+			xpc_clear_partition_engaged(1UL << partid);
+			disengaged = 1;
+		}
+		part->disengage_request_timeout = 0;
+
+		/* cancel the timer function, provided it's not us */
+		if (!in_interrupt()) {
+			del_singleshot_timer_sync(&part->
+						      disengage_request_timer);
+		}
+
+		DBUG_ON(part->act_state != XPC_P_DEACTIVATING &&
+					part->act_state != XPC_P_INACTIVE);
+		if (part->act_state != XPC_P_INACTIVE) {
+			xpc_wakeup_channel_mgr(part);
+		}
+
+		if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
+			xpc_cancel_partition_disengage_request(part);
+		}
+	}
+	return disengaged;
+}
+
+
+/*
  * Mark specified partition as active.
  */
 enum xpc_retval
@@ -721,7 +932,6 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part,
 				enum xpc_retval reason)
 {
 	unsigned long irq_flags;
-	partid_t partid = XPC_PARTID(part);
 
 
 	spin_lock_irqsave(&part->act_lock, irq_flags);
@@ -749,17 +959,27 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part,
 
 	spin_unlock_irqrestore(&part->act_lock, irq_flags);
 
-	XPC_DISALLOW_HB(partid, xpc_vars);
+	if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
+		xpc_request_partition_disengage(part);
+		xpc_IPI_send_disengage(part);
 
-	dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n", partid,
-		reason);
+		/* set a timelimit on the disengage request */
+		part->disengage_request_timeout = jiffies +
+					(xpc_disengage_request_timelimit * HZ);
+		part->disengage_request_timer.expires =
+					part->disengage_request_timeout;
+		add_timer(&part->disengage_request_timer);
+	}
+
+	dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n",
+		XPC_PARTID(part), reason);
 
-	xpc_partition_down(part, reason);
+	xpc_partition_going_down(part, reason);
 }
 
 
 /*
- * Mark specified partition as active.
+ * Mark specified partition as inactive.
  */
 void
 xpc_mark_partition_inactive(struct xpc_partition *part)
@@ -792,9 +1012,10 @@ xpc_discovery(void)
 	void *remote_rp_base;
 	struct xpc_rsvd_page *remote_rp;
 	struct xpc_vars *remote_vars;
-	u64 remote_rsvd_page_pa;
+	u64 remote_rp_pa;
 	u64 remote_vars_pa;
 	int region;
+	int region_size;
 	int max_regions;
 	int nasid;
 	struct xpc_rsvd_page *rp;
@@ -804,7 +1025,8 @@ xpc_discovery(void)
 	enum xpc_retval ret;
 
 
-	remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RSVD_PAGE_ALIGNED_SIZE,
+	remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE +
+						xp_nasid_mask_bytes,
 						GFP_KERNEL, &remote_rp_base);
 	if (remote_rp == NULL) {
 		return;
@@ -812,13 +1034,13 @@ xpc_discovery(void)
 	remote_vars = (struct xpc_vars *) remote_rp;
 
 
-	discovered_nasids = kmalloc(sizeof(u64) * XP_NASID_MASK_WORDS,
+	discovered_nasids = kmalloc(sizeof(u64) * xp_nasid_mask_words,
 							GFP_KERNEL);
 	if (discovered_nasids == NULL) {
 		kfree(remote_rp_base);
 		return;
 	}
-	memset(discovered_nasids, 0, sizeof(u64) * XP_NASID_MASK_WORDS);
+	memset(discovered_nasids, 0, sizeof(u64) * xp_nasid_mask_words);
 
 	rp = (struct xpc_rsvd_page *) xpc_rsvd_page;
 
@@ -827,11 +1049,19 @@ xpc_discovery(void)
 	 * nodes that can comprise an access protection grouping. The access
 	 * protection is in regards to memory, IOI and IPI.
 	 */
-//>>> move the next two #defines into either include/asm-ia64/sn/arch.h or
-//>>> include/asm-ia64/sn/addrs.h
-#define SH1_MAX_REGIONS		64
-#define SH2_MAX_REGIONS		256
-	max_regions = is_shub2() ? SH2_MAX_REGIONS : SH1_MAX_REGIONS;
+	max_regions = 64;
+	region_size = sn_region_size;
+
+	switch (region_size) {
+	case 128:
+		max_regions *= 2;
+	case 64:
+		max_regions *= 2;
+	case 32:
+		max_regions *= 2;
+		region_size = 16;
+		DBUG_ON(!is_shub2());
+	}
 
 	for (region = 0; region < max_regions; region++) {
 
@@ -841,8 +1071,8 @@ xpc_discovery(void)
 
 		dev_dbg(xpc_part, "searching region %d\n", region);
 
-		for (nasid = (region * sn_region_size * 2);
-		     nasid < ((region + 1) * sn_region_size * 2);
+		for (nasid = (region * region_size * 2);
+		     nasid < ((region + 1) * region_size * 2);
 		     nasid += 2) {
 
 			if ((volatile int) xpc_exiting) {
@@ -852,14 +1082,14 @@ xpc_discovery(void)
 			dev_dbg(xpc_part, "checking nasid %d\n", nasid);
 
 
-			if (XPC_NASID_IN_ARRAY(nasid, rp->part_nasids)) {
+			if (XPC_NASID_IN_ARRAY(nasid, xpc_part_nasids)) {
 				dev_dbg(xpc_part, "PROM indicates Nasid %d is "
 					"part of the local partition; skipping "
 					"region\n", nasid);
 				break;
 			}
 
-			if (!(XPC_NASID_IN_ARRAY(nasid, rp->mach_nasids))) {
+			if (!(XPC_NASID_IN_ARRAY(nasid, xpc_mach_nasids))) {
 				dev_dbg(xpc_part, "PROM indicates Nasid %d was "
 					"not on Numa-Link network at reset\n",
 					nasid);
@@ -877,7 +1107,7 @@ xpc_discovery(void)
 			/* pull over the reserved page structure */
 
 			ret = xpc_get_remote_rp(nasid, discovered_nasids,
-					      remote_rp, &remote_rsvd_page_pa);
+					      remote_rp, &remote_rp_pa);
 			if (ret != xpcSuccess) {
 				dev_dbg(xpc_part, "unable to get reserved page "
 					"from nasid %d, reason=%d\n", nasid,
@@ -948,6 +1178,13 @@ xpc_discovery(void)
 				remote_vars->act_nasid,
 				remote_vars->act_phys_cpuid);
 
+			if (XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
+								version)) {
+				part->remote_amos_page_pa =
+						remote_vars->amos_page_pa;
+				xpc_mark_partition_disengaged(part);
+				xpc_cancel_partition_disengage_request(part);
+			}
 			xpc_IPI_send_activate(remote_vars);
 		}
 	}
@@ -974,12 +1211,12 @@ xpc_initiate_partid_to_nasids(partid_t partid, void *nasid_mask)
 		return xpcPartitionDown;
 	}
 
-	part_nasid_pa = part->remote_rp_pa +
-		(u64) &((struct xpc_rsvd_page *) 0)->part_nasids;
+	memset(nasid_mask, 0, XP_NASID_MASK_BYTES);
+
+	part_nasid_pa = (u64) XPC_RP_PART_NASIDS(part->remote_rp_pa);
 
 	bte_res = xp_bte_copy(part_nasid_pa, ia64_tpa((u64) nasid_mask),
-				L1_CACHE_ALIGN(XP_NASID_MASK_BYTES),
-				(BTE_NOTIFY | BTE_WACQUIRE), NULL);
+			xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
 
 	return xpc_map_bte_errors(bte_res);
 }
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index 0e4b9ad9ef02..9bf9f23b9a1f 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -75,7 +75,7 @@ EXPORT_SYMBOL(sn_dma_set_mask);
  * more information.
  */
 void *sn_dma_alloc_coherent(struct device *dev, size_t size,
-			    dma_addr_t * dma_handle, int flags)
+			    dma_addr_t * dma_handle, gfp_t flags)
 {
 	void *cpuaddr;
 	unsigned long phys_addr;
@@ -326,6 +326,29 @@ int sn_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size)
 {
 	unsigned long addr;
 	int ret;
+	struct ia64_sal_retval isrv;
+
+	/*
+	 * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work
+	 * around hw issues at the pci bus level.  SGI proms older than
+	 * 4.10 don't implment this.
+	 */
+
+	SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE,
+		pci_domain_nr(bus), bus->number,
+		0, /* io */
+		0, /* read */
+		port, size, __pa(val));
+
+	if (isrv.status == 0)
+		return size;
+
+	/*
+	 * If the above failed, retry using the SAL_PROBE call which should
+	 * be present in all proms (but which cannot work round PCI chipset
+	 * bugs).  This code is retained for compatability with old
+	 * pre-4.10 proms, and should be removed at some point in the future.
+	 */
 
 	if (!SN_PCIBUS_BUSSOFT(bus))
 		return -ENODEV;
@@ -349,6 +372,29 @@ int sn_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size)
 	int ret = size;
 	unsigned long paddr;
 	unsigned long *addr;
+	struct ia64_sal_retval isrv;
+
+	/*
+	 * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work
+	 * around hw issues at the pci bus level.  SGI proms older than
+	 * 4.10 don't implment this.
+	 */
+
+	SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE,
+		pci_domain_nr(bus), bus->number,
+		0, /* io */
+		1, /* write */
+		port, size, __pa(&val));
+
+	if (isrv.status == 0)
+		return size;
+
+	/*
+	 * If the above failed, retry using the SAL_PROBE call which should
+	 * be present in all proms (but which cannot work round PCI chipset
+	 * bugs).  This code is retained for compatability with old
+	 * pre-4.10 proms, and should be removed at some point in the future.
+	 */
 
 	if (!SN_PCIBUS_BUSSOFT(bus)) {
 		ret = -ENODEV;
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_reg.c b/arch/ia64/sn/pci/pcibr/pcibr_reg.c
index 21426d02fbe6..4f718c3e93d3 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_reg.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_reg.c
@@ -8,6 +8,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/types.h>
+#include <asm/sn/io.h>
 #include <asm/sn/pcibr_provider.h>
 #include <asm/sn/pcibus_provider_defs.h>
 #include <asm/sn/pcidev.h>
@@ -29,10 +30,10 @@ void pcireg_control_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits)
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ptr->tio.cp_control &= ~bits;
+			__sn_clrq_relaxed(&ptr->tio.cp_control, bits);
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ptr->pic.p_wid_control &= ~bits;
+			__sn_clrq_relaxed(&ptr->pic.p_wid_control, bits);
 			break;
 		default:
 			panic
@@ -49,10 +50,10 @@ void pcireg_control_bit_set(struct pcibus_info *pcibus_info, uint64_t bits)
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ptr->tio.cp_control |= bits;
+			__sn_setq_relaxed(&ptr->tio.cp_control, bits);
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ptr->pic.p_wid_control |= bits;
+			__sn_setq_relaxed(&ptr->pic.p_wid_control, bits);
 			break;
 		default:
 			panic
@@ -73,10 +74,10 @@ uint64_t pcireg_tflush_get(struct pcibus_info *pcibus_info)
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ret = ptr->tio.cp_tflush;
+			ret = __sn_readq_relaxed(&ptr->tio.cp_tflush);
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ret = ptr->pic.p_wid_tflush;
+			ret = __sn_readq_relaxed(&ptr->pic.p_wid_tflush);
 			break;
 		default:
 			panic
@@ -103,10 +104,10 @@ uint64_t pcireg_intr_status_get(struct pcibus_info * pcibus_info)
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ret = ptr->tio.cp_int_status;
+			ret = __sn_readq_relaxed(&ptr->tio.cp_int_status);
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ret = ptr->pic.p_int_status;
+			ret = __sn_readq_relaxed(&ptr->pic.p_int_status);
 			break;
 		default:
 			panic
@@ -127,10 +128,10 @@ void pcireg_intr_enable_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits)
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ptr->tio.cp_int_enable &= ~bits;
+			__sn_clrq_relaxed(&ptr->tio.cp_int_enable, bits);
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ptr->pic.p_int_enable &= ~bits;
+			__sn_clrq_relaxed(&ptr->pic.p_int_enable, ~bits);
 			break;
 		default:
 			panic
@@ -147,10 +148,10 @@ void pcireg_intr_enable_bit_set(struct pcibus_info *pcibus_info, uint64_t bits)
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ptr->tio.cp_int_enable |= bits;
+			__sn_setq_relaxed(&ptr->tio.cp_int_enable, bits);
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ptr->pic.p_int_enable |= bits;
+			__sn_setq_relaxed(&ptr->pic.p_int_enable, bits);
 			break;
 		default:
 			panic
@@ -171,14 +172,16 @@ void pcireg_intr_addr_addr_set(struct pcibus_info *pcibus_info, int int_n,
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ptr->tio.cp_int_addr[int_n] &= ~TIOCP_HOST_INTR_ADDR;
-			ptr->tio.cp_int_addr[int_n] |=
-			    (addr & TIOCP_HOST_INTR_ADDR);
+			__sn_clrq_relaxed(&ptr->tio.cp_int_addr[int_n],
+			    TIOCP_HOST_INTR_ADDR);
+			__sn_setq_relaxed(&ptr->tio.cp_int_addr[int_n],
+			    (addr & TIOCP_HOST_INTR_ADDR));
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ptr->pic.p_int_addr[int_n] &= ~PIC_HOST_INTR_ADDR;
-			ptr->pic.p_int_addr[int_n] |=
-			    (addr & PIC_HOST_INTR_ADDR);
+			__sn_clrq_relaxed(&ptr->pic.p_int_addr[int_n],
+			    PIC_HOST_INTR_ADDR);
+			__sn_setq_relaxed(&ptr->pic.p_int_addr[int_n],
+			    (addr & PIC_HOST_INTR_ADDR));
 			break;
 		default:
 			panic
@@ -198,10 +201,10 @@ void pcireg_force_intr_set(struct pcibus_info *pcibus_info, int int_n)
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ptr->tio.cp_force_pin[int_n] = 1;
+			writeq(1, &ptr->tio.cp_force_pin[int_n]);
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ptr->pic.p_force_pin[int_n] = 1;
+			writeq(1, &ptr->pic.p_force_pin[int_n]);
 			break;
 		default:
 			panic
@@ -222,10 +225,12 @@ uint64_t pcireg_wrb_flush_get(struct pcibus_info *pcibus_info, int device)
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ret = ptr->tio.cp_wr_req_buf[device];
+			ret =
+			    __sn_readq_relaxed(&ptr->tio.cp_wr_req_buf[device]);
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ret = ptr->pic.p_wr_req_buf[device];
+			ret =
+			    __sn_readq_relaxed(&ptr->pic.p_wr_req_buf[device]);
 			break;
 		default:
 		      panic("pcireg_wrb_flush_get: unknown bridgetype bridge 0x%p", (void *)ptr);
@@ -244,10 +249,10 @@ void pcireg_int_ate_set(struct pcibus_info *pcibus_info, int ate_index,
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ptr->tio.cp_int_ate_ram[ate_index] = (uint64_t) val;
+			writeq(val, &ptr->tio.cp_int_ate_ram[ate_index]);
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ptr->pic.p_int_ate_ram[ate_index] = (uint64_t) val;
+			writeq(val, &ptr->pic.p_int_ate_ram[ate_index]);
 			break;
 		default:
 			panic
@@ -265,12 +270,10 @@ uint64_t *pcireg_int_ate_addr(struct pcibus_info *pcibus_info, int ate_index)
 	if (pcibus_info) {
 		switch (pcibus_info->pbi_bridge_type) {
 		case PCIBR_BRIDGETYPE_TIOCP:
-			ret =
-			    (uint64_t *) & (ptr->tio.cp_int_ate_ram[ate_index]);
+			ret = &ptr->tio.cp_int_ate_ram[ate_index];
 			break;
 		case PCIBR_BRIDGETYPE_PIC:
-			ret =
-			    (uint64_t *) & (ptr->pic.p_int_ate_ram[ate_index]);
+			ret = &ptr->pic.p_int_ate_ram[ate_index];
 			break;
 		default:
 			panic
diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index 19bced34d5f1..46b646a6d345 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -11,6 +11,7 @@
 #include <linux/pci.h>
 #include <asm/sn/sn_sal.h>
 #include <asm/sn/addrs.h>
+#include <asm/sn/io.h>
 #include <asm/sn/pcidev.h>
 #include <asm/sn/pcibus_provider_defs.h>
 #include <asm/sn/tioca_provider.h>
@@ -37,7 +38,7 @@ tioca_gart_init(struct tioca_kernel *tioca_kern)
 	uint64_t offset;
 	struct page *tmp;
 	struct tioca_common *tioca_common;
-	volatile struct tioca *ca_base;
+	struct tioca *ca_base;
 
 	tioca_common = tioca_kern->ca_common;
 	ca_base = (struct tioca *)tioca_common->ca_common.bs_base;
@@ -174,27 +175,29 @@ tioca_gart_init(struct tioca_kernel *tioca_kern)
 	 * 	DISABLE GART PREFETCHING due to hw bug tracked in SGI PV930029
 	 */
 
-	ca_base->ca_control1 |= CA_AGPDMA_OP_ENB_COMBDELAY;	/* PV895469 ? */
-	ca_base->ca_control2 &= ~(CA_GART_MEM_PARAM);
-	ca_base->ca_control2 |= (0x2ull << CA_GART_MEM_PARAM_SHFT);
+	__sn_setq_relaxed(&ca_base->ca_control1,
+			CA_AGPDMA_OP_ENB_COMBDELAY);	/* PV895469 ? */
+	__sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM);
+	__sn_setq_relaxed(&ca_base->ca_control2,
+			(0x2ull << CA_GART_MEM_PARAM_SHFT));
 	tioca_kern->ca_gart_iscoherent = 1;
-	ca_base->ca_control2 &=
-	    ~(CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB);
+	__sn_clrq_relaxed(&ca_base->ca_control2,
+	    		(CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB));
 
 	/*
 	 * Unmask GART fetch error interrupts.  Clear residual errors first.
 	 */
 
-	ca_base->ca_int_status_alias = CA_GART_FETCH_ERR;
-	ca_base->ca_mult_error_alias = CA_GART_FETCH_ERR;
-	ca_base->ca_int_mask &= ~CA_GART_FETCH_ERR;
+	writeq(CA_GART_FETCH_ERR, &ca_base->ca_int_status_alias);
+	writeq(CA_GART_FETCH_ERR, &ca_base->ca_mult_error_alias);
+	__sn_clrq_relaxed(&ca_base->ca_int_mask, CA_GART_FETCH_ERR);
 
 	/*
 	 * Program the aperature and gart registers in TIOCA
 	 */
 
-	ca_base->ca_gart_aperature = ap_reg;
-	ca_base->ca_gart_ptr_table = tioca_kern->ca_gart_coretalk_addr | 1;
+	writeq(ap_reg, &ca_base->ca_gart_aperature);
+	writeq(tioca_kern->ca_gart_coretalk_addr|1, &ca_base->ca_gart_ptr_table);
 
 	return 0;
 }
@@ -211,7 +214,6 @@ void
 tioca_fastwrite_enable(struct tioca_kernel *tioca_kern)
 {
 	int cap_ptr;
-	uint64_t ca_control1;
 	uint32_t reg;
 	struct tioca *tioca_base;
 	struct pci_dev *pdev;
@@ -256,9 +258,7 @@ tioca_fastwrite_enable(struct tioca_kernel *tioca_kern)
 	 */
 
 	tioca_base = (struct tioca *)common->ca_common.bs_base;
-	ca_control1 = tioca_base->ca_control1;
-	ca_control1 |= CA_AGP_FW_ENABLE;
-	tioca_base->ca_control1 = ca_control1;
+	__sn_setq_relaxed(&tioca_base->ca_control1, CA_AGP_FW_ENABLE);
 }
 
 EXPORT_SYMBOL(tioca_fastwrite_enable);	/* used by agp-sgi */
@@ -345,7 +345,7 @@ tioca_dma_d48(struct pci_dev *pdev, uint64_t paddr)
 		return 0;
 	}
 
-	agp_dma_extn = ca_base->ca_agp_dma_addr_extn;
+	agp_dma_extn = __sn_readq_relaxed(&ca_base->ca_agp_dma_addr_extn);
 	if (node_upper != (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)) {
 		printk(KERN_ERR "%s:  coretalk upper node (%u) "
 		       "mismatch with ca_agp_dma_addr_extn (%lu)\n",
diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c
index 8e75db2b825d..9f03d4e5121c 100644
--- a/arch/ia64/sn/pci/tioce_provider.c
+++ b/arch/ia64/sn/pci/tioce_provider.c
@@ -11,6 +11,7 @@
 #include <linux/pci.h>
 #include <asm/sn/sn_sal.h>
 #include <asm/sn/addrs.h>
+#include <asm/sn/io.h>
 #include <asm/sn/pcidev.h>
 #include <asm/sn/pcibus_provider_defs.h>
 #include <asm/sn/tioce_provider.h>
@@ -227,7 +228,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
 
 		ate = ATE_MAKE(addr, pagesize);
 		ate_shadow[i + j] = ate;
-		ate_reg[i + j] = ate;
+		writeq(ate, &ate_reg[i + j]);
 		addr += pagesize;
 	}
 
@@ -268,10 +269,10 @@ tioce_dma_d32(struct pci_dev *pdev, uint64_t ct_addr)
 	pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
 
 	if (ce_kern->ce_port[port].dirmap_refcnt == 0) {
-		volatile uint64_t tmp;
+		uint64_t tmp;
 
 		ce_kern->ce_port[port].dirmap_shadow = ct_upper;
-		ce_mmr->ce_ure_dir_map[port] = ct_upper;
+		writeq(ct_upper, &ce_mmr->ce_ure_dir_map[port]);
 		tmp = ce_mmr->ce_ure_dir_map[port];
 		dma_ok = 1;
 	} else
@@ -343,7 +344,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
 	if (TIOCE_D32_ADDR(bus_addr)) {
 		if (--ce_kern->ce_port[port].dirmap_refcnt == 0) {
 			ce_kern->ce_port[port].dirmap_shadow = 0;
-			ce_mmr->ce_ure_dir_map[port] = 0;
+			writeq(0, &ce_mmr->ce_ure_dir_map[port]);
 		}
 	} else {
 		struct tioce_dmamap *map;
@@ -582,18 +583,18 @@ tioce_kern_init(struct tioce_common *tioce_common)
 	 */
 
 	tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base;
-	tioce_mmr->ce_ure_page_map &= ~CE_URE_PAGESIZE_MASK;
-	tioce_mmr->ce_ure_page_map |= CE_URE_256K_PAGESIZE;
+	__sn_clrq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_PAGESIZE_MASK);
+	__sn_setq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_256K_PAGESIZE);
 	tioce_kern->ce_ate3240_pagesize = KB(256);
 
 	for (i = 0; i < TIOCE_NUM_M40_ATES; i++) {
 		tioce_kern->ce_ate40_shadow[i] = 0;
-		tioce_mmr->ce_ure_ate40[i] = 0;
+		writeq(0, &tioce_mmr->ce_ure_ate40[i]);
 	}
 
 	for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) {
 		tioce_kern->ce_ate3240_shadow[i] = 0;
-		tioce_mmr->ce_ure_ate3240[i] = 0;
+		writeq(0, &tioce_mmr->ce_ure_ate3240[i]);
 	}
 
 	return tioce_kern;
@@ -665,7 +666,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info)
 	default:
 		return;
 	}
-	ce_mmr->ce_adm_force_int = force_int_val;
+	writeq(force_int_val, &ce_mmr->ce_adm_force_int);
 }
 
 /**
@@ -686,6 +687,7 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
 	struct tioce_common *ce_common;
 	struct tioce *ce_mmr;
 	int bit;
+	uint64_t vector;
 
 	pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
 	if (!pcidev_info)
@@ -696,11 +698,11 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
 
 	bit = sn_irq_info->irq_int_bit;
 
-	ce_mmr->ce_adm_int_mask |= (1UL << bit);
-	ce_mmr->ce_adm_int_dest[bit] =
-		((uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT) |
-			   sn_irq_info->irq_xtalkaddr;
-	ce_mmr->ce_adm_int_mask &= ~(1UL << bit);
+	__sn_setq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
+	vector = (uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT;
+	vector |= sn_irq_info->irq_xtalkaddr;
+	writeq(vector, &ce_mmr->ce_adm_int_dest[bit]);
+	__sn_clrq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
 
 	tioce_force_interrupt(sn_irq_info);
 }
diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S
index 85920fb8d08c..396c94218cc2 100644
--- a/arch/m32r/kernel/entry.S
+++ b/arch/m32r/kernel/entry.S
@@ -653,8 +653,6 @@ ENTRY(rie_handler)
 	SAVE_ALL
 	mvfc	r0, bpc
 	ld	r1, @r0
-	seth	r0, #0xa0f0
-	st	r1, @r0
 	ldi	r1, #0x20			; error_code
 	mv	r0, sp				; pt_regs
 	bl	do_rie_handler
diff --git a/arch/m32r/kernel/io_m32700ut.c b/arch/m32r/kernel/io_m32700ut.c
index e545b065f7e9..eda9f963c1eb 100644
--- a/arch/m32r/kernel/io_m32700ut.c
+++ b/arch/m32r/kernel/io_m32700ut.c
@@ -64,11 +64,11 @@ static inline void *__port2addr_ata(unsigned long port)
  * from 0x10000000 to 0x13ffffff on physical address.
  * The base address of LAN controller(LAN91C111) is 0x300.
  */
-#define LAN_IOSTART	0x300
-#define LAN_IOEND	0x320
+#define LAN_IOSTART	0xa0000300
+#define LAN_IOEND	0xa0000320
 static inline void *_port2addr_ne(unsigned long port)
 {
-	return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+	return (void *)(port + 0x10000000);
 }
 static inline void *_port2addr_usb(unsigned long port)
 {
diff --git a/arch/m32r/kernel/io_mappi.c b/arch/m32r/kernel/io_mappi.c
index 78033165fb5c..3c3da042fbd1 100644
--- a/arch/m32r/kernel/io_mappi.c
+++ b/arch/m32r/kernel/io_mappi.c
@@ -31,7 +31,7 @@ extern void pcc_iowrite(int, unsigned long, void *, size_t, size_t, int);
 
 static inline void *_port2addr(unsigned long port)
 {
-	return (void *)(port + NONCACHE_OFFSET);
+	return (void *)(port | (NONCACHE_OFFSET));
 }
 
 static inline void *_port2addr_ne(unsigned long port)
diff --git a/arch/m32r/kernel/io_mappi2.c b/arch/m32r/kernel/io_mappi2.c
index 5c03504bf653..df3c729cb3e0 100644
--- a/arch/m32r/kernel/io_mappi2.c
+++ b/arch/m32r/kernel/io_mappi2.c
@@ -33,12 +33,9 @@ extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int);
 
 static inline void *_port2addr(unsigned long port)
 {
-	return (void *)(port + NONCACHE_OFFSET);
+	return (void *)(port | (NONCACHE_OFFSET));
 }
 
-#define LAN_IOSTART	0x300
-#define LAN_IOEND	0x320
-
 #if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
 static inline void *__port2addr_ata(unsigned long port)
 {
@@ -59,15 +56,17 @@ static inline void *__port2addr_ata(unsigned long port)
 }
 #endif
 
+#define LAN_IOSTART	0xa0000300
+#define LAN_IOEND	0xa0000320
 #ifdef CONFIG_CHIP_OPSP
 static inline void *_port2addr_ne(unsigned long port)
 {
-	return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+	return (void *)(port + 0x10000000);
 }
 #else
 static inline void *_port2addr_ne(unsigned long port)
 {
-	return (void *)(port + NONCACHE_OFFSET + 0x04000000);
+	return (void *)(port + 0x04000000);
 }
 #endif
 static inline void *_port2addr_usb(unsigned long port)
diff --git a/arch/m32r/kernel/io_mappi3.c b/arch/m32r/kernel/io_mappi3.c
index c80bde657854..6716ffea769a 100644
--- a/arch/m32r/kernel/io_mappi3.c
+++ b/arch/m32r/kernel/io_mappi3.c
@@ -36,9 +36,6 @@ static inline void *_port2addr(unsigned long port)
 	return (void *)(port + NONCACHE_OFFSET);
 }
 
-#define LAN_IOSTART	0x300
-#define LAN_IOEND	0x320
-
 #if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
 static inline void *__port2addr_ata(unsigned long port)
 {
@@ -59,9 +56,11 @@ static inline void *__port2addr_ata(unsigned long port)
 }
 #endif
 
+#define LAN_IOSTART	0xa0000300
+#define LAN_IOEND	0xa0000320
 static inline void *_port2addr_ne(unsigned long port)
 {
-	return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+	return (void *)(port + 0x10000000);
 }
 
 static inline void *_port2addr_usb(unsigned long port)
diff --git a/arch/m32r/kernel/io_oaks32r.c b/arch/m32r/kernel/io_oaks32r.c
index 9997dddd24d7..8be323931e4a 100644
--- a/arch/m32r/kernel/io_oaks32r.c
+++ b/arch/m32r/kernel/io_oaks32r.c
@@ -16,7 +16,7 @@
 
 static inline void *_port2addr(unsigned long port)
 {
-	return (void *)(port + NONCACHE_OFFSET);
+	return (void *)(port | (NONCACHE_OFFSET));
 }
 
 static inline  void *_port2addr_ne(unsigned long port)
diff --git a/arch/m32r/kernel/io_opsput.c b/arch/m32r/kernel/io_opsput.c
index e34951e8156f..4793bd18e115 100644
--- a/arch/m32r/kernel/io_opsput.c
+++ b/arch/m32r/kernel/io_opsput.c
@@ -36,7 +36,7 @@ extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int);
 
 static inline void *_port2addr(unsigned long port)
 {
-	return (void *)(port + NONCACHE_OFFSET);
+	return (void *)(port | (NONCACHE_OFFSET));
 }
 
 /*
@@ -44,11 +44,11 @@ static inline void *_port2addr(unsigned long port)
  * from 0x10000000 to 0x13ffffff on physical address.
  * The base address of LAN controller(LAN91C111) is 0x300.
  */
-#define LAN_IOSTART	0x300
-#define LAN_IOEND	0x320
+#define LAN_IOSTART	0xa0000300
+#define LAN_IOEND	0xa0000320
 static inline void *_port2addr_ne(unsigned long port)
 {
-	return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+	return (void *)(port + 0x10000000);
 }
 static inline void *_port2addr_usb(unsigned long port)
 {
diff --git a/arch/m32r/kernel/io_usrv.c b/arch/m32r/kernel/io_usrv.c
index 9eb161dcc104..39a379af40bc 100644
--- a/arch/m32r/kernel/io_usrv.c
+++ b/arch/m32r/kernel/io_usrv.c
@@ -47,7 +47,7 @@ static inline void *_port2addr(unsigned long port)
 	else if (port >= UART1_IOSTART && port <= UART1_IOEND)
 		port = ((port - UART1_IOSTART) << 1) + UART1_REGSTART;
 #endif	/* CONFIG_SERIAL_8250 || CONFIG_SERIAL_8250_MODULE */
-	return (void *)(port + NONCACHE_OFFSET);
+	return (void *)(port | (NONCACHE_OFFSET));
 }
 
 static inline void delay(void)
diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c
index 124f7c1b775e..078d2a0e71c2 100644
--- a/arch/m32r/kernel/ptrace.c
+++ b/arch/m32r/kernel/ptrace.c
@@ -756,7 +756,7 @@ do_ptrace(long request, struct task_struct *child, long addr, long data)
 	return ret;
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
 {
 	struct task_struct *child;
 	int ret;
diff --git a/arch/m32r/kernel/setup.c b/arch/m32r/kernel/setup.c
index ec5674727e7f..f722ec8eb021 100644
--- a/arch/m32r/kernel/setup.c
+++ b/arch/m32r/kernel/setup.c
@@ -305,19 +305,19 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 	seq_printf(m, "processor\t: %ld\n", cpu);
 
-#ifdef CONFIG_CHIP_VDEC2
+#if defined(CONFIG_CHIP_VDEC2)
 	seq_printf(m, "cpu family\t: VDEC2\n"
 		"cache size\t: Unknown\n");
-#elif  CONFIG_CHIP_M32700
+#elif defined(CONFIG_CHIP_M32700)
 	seq_printf(m,"cpu family\t: M32700\n"
 		"cache size\t: I-8KB/D-8KB\n");
-#elif  CONFIG_CHIP_M32102
+#elif defined(CONFIG_CHIP_M32102)
 	seq_printf(m,"cpu family\t: M32102\n"
 		"cache size\t: I-8KB\n");
-#elif  CONFIG_CHIP_OPSP
+#elif defined(CONFIG_CHIP_OPSP)
 	seq_printf(m,"cpu family\t: OPSP\n"
 		"cache size\t: I-8KB/D-8KB\n");
-#elif  CONFIG_CHIP_MP
+#elif defined(CONFIG_CHIP_MP)
 	seq_printf(m, "cpu family\t: M32R-MP\n"
 		"cache size\t: I-xxKB/D-xxKB\n");
 #else
@@ -326,19 +326,19 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, "bogomips\t: %lu.%02lu\n",
 		c->loops_per_jiffy/(500000/HZ),
 		(c->loops_per_jiffy/(5000/HZ)) % 100);
-#ifdef CONFIG_PLAT_MAPPI
+#if defined(CONFIG_PLAT_MAPPI)
 	seq_printf(m, "Machine\t\t: Mappi Evaluation board\n");
-#elif CONFIG_PLAT_MAPPI2
+#elif defined(CONFIG_PLAT_MAPPI2)
 	seq_printf(m, "Machine\t\t: Mappi-II Evaluation board\n");
-#elif CONFIG_PLAT_MAPPI3
+#elif defined(CONFIG_PLAT_MAPPI3)
 	seq_printf(m, "Machine\t\t: Mappi-III Evaluation board\n");
-#elif  CONFIG_PLAT_M32700UT
+#elif defined(CONFIG_PLAT_M32700UT)
 	seq_printf(m, "Machine\t\t: M32700UT Evaluation board\n");
-#elif  CONFIG_PLAT_OPSPUT
+#elif defined(CONFIG_PLAT_OPSPUT)
 	seq_printf(m, "Machine\t\t: OPSPUT Evaluation board\n");
-#elif  CONFIG_PLAT_USRV
+#elif defined(CONFIG_PLAT_USRV)
 	seq_printf(m, "Machine\t\t: uServer\n");
-#elif  CONFIG_PLAT_OAKS32R
+#elif defined(CONFIG_PLAT_OAKS32R)
 	seq_printf(m, "Machine\t\t: OAKS32R\n");
 #else
 	seq_printf(m, "Machine\t\t: Unknown\n");
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index 539c562cd54d..2ebce2063fea 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -39,10 +39,6 @@ extern void send_IPI_allbutself(int, int);
 extern void smp_local_timer_interrupt(struct pt_regs *);
 #endif
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 extern unsigned long wall_jiffies;
 #define TICK_SIZE	(tick_nsec / 1000)
 
diff --git a/arch/m32r/lib/csum_partial_copy.c b/arch/m32r/lib/csum_partial_copy.c
index ddb16a83a8ce..3d5f06145854 100644
--- a/arch/m32r/lib/csum_partial_copy.c
+++ b/arch/m32r/lib/csum_partial_copy.c
@@ -18,10 +18,10 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
+#include <linux/string.h>
 
 #include <net/checksum.h>
 #include <asm/byteorder.h>
-#include <asm/string.h>
 #include <asm/uaccess.h>
 
 /*
diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c
index d9a40b1fe8ba..6facf15b04f3 100644
--- a/arch/m32r/mm/init.c
+++ b/arch/m32r/mm/init.c
@@ -48,6 +48,8 @@ void show_mem(void)
 	show_free_areas();
 	printk("Free swap:       %6ldkB\n",nr_swap_pages<<(PAGE_SHIFT-10));
 	for_each_pgdat(pgdat) {
+		unsigned long flags;
+		pgdat_resize_lock(pgdat, &flags);
 		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
 			page = pgdat_page_nr(pgdat, i);
 			total++;
@@ -60,6 +62,7 @@ void show_mem(void)
 			else if (page_count(page))
 				shared += page_count(page) - 1;
 		}
+		pgdat_resize_unlock(pgdat, &flags);
 	}
 	printk("%d pages of RAM\n", total);
 	printk("%d pages of HIGHMEM\n",highmem);
@@ -150,10 +153,14 @@ int __init reservedpages_count(void)
 	int reservedpages, nid, i;
 
 	reservedpages = 0;
-	for_each_online_node(nid)
+	for_each_online_node(nid) {
+		unsigned long flags;
+		pgdat_resize_lock(NODE_DATA(nid), &flags);
 		for (i = 0 ; i < MAX_LOW_PFN(nid) - START_PFN(nid) ; i++)
 			if (PageReserved(nid_page_nr(nid, i)))
 				reservedpages++;
+		pgdat_resize_unlock(NODE_DATA(nid), &flags);
+	}
 
 	return reservedpages;
 }
diff --git a/arch/m32r/mm/ioremap.c b/arch/m32r/mm/ioremap.c
index 70c59055c19c..a151849a605e 100644
--- a/arch/m32r/mm/ioremap.c
+++ b/arch/m32r/mm/ioremap.c
@@ -67,7 +67,7 @@ remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
 	if (address >= end)
 		BUG();
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -90,7 +90,6 @@ remap_area_pages(unsigned long address, unsigned long phys_addr,
 	flush_cache_all();
 	if (address >= end)
 		BUG();
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		pmd_t *pmd;
 		pmd = pmd_alloc(&init_mm, dir, address);
@@ -104,7 +103,6 @@ remap_area_pages(unsigned long address, unsigned long phys_addr,
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	} while (address && (address < end));
-	spin_unlock(&init_mm.page_table_lock);
 	flush_tlb_all();
 	return error;
 }
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index ba960bbc8e6d..1dd5d18b2201 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -388,33 +388,11 @@ config AMIGA_PCMCIA
 	  Include support in the kernel for pcmcia on Amiga 1200 and Amiga
 	  600. If you intend to use pcmcia cards say Y; otherwise say N.
 
-config STRAM_SWAP
-	bool "Support for ST-RAM as swap space"
-	depends on ATARI && BROKEN
-	---help---
-	  Some Atari 68k machines (including the 520STF and 1020STE) divide
-	  their addressable memory into ST and TT sections.  The TT section
-	  (up to 512MB) is the main memory; the ST section (up to 4MB) is
-	  accessible to the built-in graphics board, runs slower, and is
-	  present mainly for backward compatibility with older machines.
-
-	  This enables support for using (parts of) ST-RAM as swap space,
-	  instead of as normal system memory. This can first enhance system
-	  performance if you have lots of alternate RAM (compared to the size
-	  of ST-RAM), because executable code always will reside in faster
-	  memory. ST-RAM will remain as ultra-fast swap space. On the other
-	  hand, it allows much improved dynamic allocations of ST-RAM buffers
-	  for device driver modules (e.g. floppy, ACSI, SLM printer, DMA
-	  sound). The probability that such allocations at module load time
-	  fail is drastically reduced.
-
 config STRAM_PROC
 	bool "ST-RAM statistics in /proc"
 	depends on ATARI
 	help
-	  Say Y here to report ST-RAM usage statistics in /proc/stram.  See
-	  the help for CONFIG_STRAM_SWAP for discussion of ST-RAM and its
-	  uses.
+	  Say Y here to report ST-RAM usage statistics in /proc/stram.
 
 config HEARTBEAT
 	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
diff --git a/arch/m68k/atari/stram.c b/arch/m68k/atari/stram.c
index 5a3c106b40c8..22e0481a5f7b 100644
--- a/arch/m68k/atari/stram.c
+++ b/arch/m68k/atari/stram.c
@@ -15,11 +15,9 @@
 #include <linux/kdev_t.h>
 #include <linux/major.h>
 #include <linux/init.h>
-#include <linux/swap.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/pagemap.h>
-#include <linux/shm.h>
 #include <linux/bootmem.h>
 #include <linux/mount.h>
 #include <linux/blkdev.h>
@@ -33,8 +31,6 @@
 #include <asm/io.h>
 #include <asm/semaphore.h>
 
-#include <linux/swapops.h>
-
 #undef DEBUG
 
 #ifdef DEBUG
@@ -49,8 +45,7 @@
 #include <linux/proc_fs.h>
 #endif
 
-/* Pre-swapping comments:
- *
+/*
  * ++roman:
  *
  * New version of ST-Ram buffer allocation. Instead of using the
@@ -75,76 +70,6 @@
  *
  */
 
-/*
- * New Nov 1997: Use ST-RAM as swap space!
- *
- * In the past, there were often problems with modules that require ST-RAM
- * buffers. Such drivers have to use __get_dma_pages(), which unfortunately
- * often isn't very successful in allocating more than 1 page :-( [1] The net
- * result was that most of the time you couldn't insmod such modules (ataflop,
- * ACSI, SCSI on Falcon, Atari internal framebuffer, not to speak of acsi_slm,
- * which needs a 1 MB buffer... :-).
- *
- * To overcome this limitation, ST-RAM can now be turned into a very
- * high-speed swap space. If a request for an ST-RAM buffer comes, the kernel
- * now tries to unswap some pages on that swap device to make some free (and
- * contiguous) space. This works much better in comparison to
- * __get_dma_pages(), since used swap pages can be selectively freed by either
- * moving them to somewhere else in swap space, or by reading them back into
- * system memory. Ok, there operation of unswapping isn't really cheap (for
- * each page, one has to go through the page tables of all processes), but it
- * doesn't happen that often (only when allocation ST-RAM, i.e. when loading a
- * module that needs ST-RAM). But it at least makes it possible to load such
- * modules!
- *
- * It could also be that overall system performance increases a bit due to
- * ST-RAM swapping, since slow ST-RAM isn't used anymore for holding data or
- * executing code in. It's then just a (very fast, compared to disk) back
- * storage for not-so-often needed data. (But this effect must be compared
- * with the loss of total memory...) Don't know if the effect is already
- * visible on a TT, where the speed difference between ST- and TT-RAM isn't
- * that dramatic, but it should on machines where TT-RAM is really much faster
- * (e.g. Afterburner).
- *
- *   [1]: __get_free_pages() does a fine job if you only want one page, but if
- * you want more (contiguous) pages, it can give you such a block only if
- * there's already a free one. The algorithm can't try to free buffers or swap
- * out something in order to make more free space, since all that page-freeing
- * mechanisms work "target-less", i.e. they just free something, but not in a
- * specific place. I.e., __get_free_pages() can't do anything to free
- * *adjacent* pages :-( This situation becomes even worse for DMA memory,
- * since the freeing algorithms are also blind to DMA capability of pages.
- */
-
-/* 1998-10-20: ++andreas
-   unswap_by_move disabled because it does not handle swapped shm pages.
-*/
-
-/* 2000-05-01: ++andreas
-   Integrated with bootmem.  Remove all traces of unswap_by_move.
-*/
-
-#ifdef CONFIG_STRAM_SWAP
-#define ALIGN_IF_SWAP(x)	PAGE_ALIGN(x)
-#else
-#define ALIGN_IF_SWAP(x)	(x)
-#endif
-
-/* get index of swap page at address 'addr' */
-#define SWAP_NR(addr)		(((addr) - swap_start) >> PAGE_SHIFT)
-
-/* get address of swap page #'nr' */
-#define SWAP_ADDR(nr)		(swap_start + ((nr) << PAGE_SHIFT))
-
-/* get number of pages for 'n' bytes (already page-aligned) */
-#define N_PAGES(n)			((n) >> PAGE_SHIFT)
-
-/* The following two numbers define the maximum fraction of ST-RAM in total
- * memory, below that the kernel would automatically use ST-RAM as swap
- * space. This decision can be overridden with stram_swap= */
-#define MAX_STRAM_FRACTION_NOM		1
-#define MAX_STRAM_FRACTION_DENOM	3
-
 /* Start and end (virtual) of ST-RAM */
 static void *stram_start, *stram_end;
 
@@ -164,10 +89,9 @@ typedef struct stram_block {
 } BLOCK;
 
 /* values for flags field */
-#define BLOCK_FREE		0x01	/* free structure in the BLOCKs pool */
+#define BLOCK_FREE	0x01	/* free structure in the BLOCKs pool */
 #define BLOCK_KMALLOCED	0x02	/* structure allocated by kmalloc() */
-#define BLOCK_GFP		0x08	/* block allocated with __get_dma_pages() */
-#define BLOCK_INSWAP	0x10	/* block allocated in swap space */
+#define BLOCK_GFP	0x08	/* block allocated with __get_dma_pages() */
 
 /* list of allocated blocks */
 static BLOCK *alloc_list;
@@ -179,60 +103,8 @@ static BLOCK *alloc_list;
 #define N_STATIC_BLOCKS	20
 static BLOCK static_blocks[N_STATIC_BLOCKS];
 
-#ifdef CONFIG_STRAM_SWAP
-/* max. number of bytes to use for swapping
- *  0 = no ST-RAM swapping
- * -1 = do swapping (to whole ST-RAM) if it's less than MAX_STRAM_FRACTION of
- *      total memory
- */
-static int max_swap_size = -1;
-
-/* start and end of swapping area */
-static void *swap_start, *swap_end;
-
-/* The ST-RAM's swap info structure */
-static struct swap_info_struct *stram_swap_info;
-
-/* The ST-RAM's swap type */
-static int stram_swap_type;
-
-/* Semaphore for get_stram_region.  */
-static DECLARE_MUTEX(stram_swap_sem);
-
-/* major and minor device number of the ST-RAM device; for the major, we use
- * the same as Amiga z2ram, which is really similar and impossible on Atari,
- * and for the minor a relatively odd number to avoid the user creating and
- * using that device. */
-#define	STRAM_MAJOR		Z2RAM_MAJOR
-#define	STRAM_MINOR		13
-
-/* Some impossible pointer value */
-#define MAGIC_FILE_P	(struct file *)0xffffdead
-
-#ifdef DO_PROC
-static unsigned stat_swap_read;
-static unsigned stat_swap_write;
-static unsigned stat_swap_force;
-#endif /* DO_PROC */
-
-#endif /* CONFIG_STRAM_SWAP */
-
 /***************************** Prototypes *****************************/
 
-#ifdef CONFIG_STRAM_SWAP
-static int swap_init(void *start_mem, void *swap_data);
-static void *get_stram_region( unsigned long n_pages );
-static void free_stram_region( unsigned long offset, unsigned long n_pages
-			       );
-static int in_some_region(void *addr);
-static unsigned long find_free_region( unsigned long n_pages, unsigned long
-				       *total_free, unsigned long
-				       *region_free );
-static void do_stram_request(request_queue_t *);
-static int stram_open( struct inode *inode, struct file *filp );
-static int stram_release( struct inode *inode, struct file *filp );
-static void reserve_region(void *start, void *end);
-#endif
 static BLOCK *add_region( void *addr, unsigned long size );
 static BLOCK *find_region( void *addr );
 static int remove_region( BLOCK *block );
@@ -279,84 +151,11 @@ void __init atari_stram_init(void)
  */
 void __init atari_stram_reserve_pages(void *start_mem)
 {
-#ifdef CONFIG_STRAM_SWAP
-	/* if max_swap_size is negative (i.e. no stram_swap= option given),
-	 * determine at run time whether to use ST-RAM swapping */
-	if (max_swap_size < 0)
-		/* Use swapping if ST-RAM doesn't make up more than MAX_STRAM_FRACTION
-		 * of total memory. In that case, the max. size is set to 16 MB,
-		 * because ST-RAM can never be bigger than that.
-		 * Also, never use swapping on a Hades, there's no separate ST-RAM in
-		 * that machine. */
-		max_swap_size =
-			(!MACH_IS_HADES &&
-			 (N_PAGES(stram_end-stram_start)*MAX_STRAM_FRACTION_DENOM <=
-			  ((unsigned long)high_memory>>PAGE_SHIFT)*MAX_STRAM_FRACTION_NOM)) ? 16*1024*1024 : 0;
-	DPRINTK( "atari_stram_reserve_pages: max_swap_size = %d\n", max_swap_size );
-#endif
-
 	/* always reserve first page of ST-RAM, the first 2 kB are
 	 * supervisor-only! */
 	if (!kernel_in_stram)
 		reserve_bootmem (0, PAGE_SIZE);
 
-#ifdef CONFIG_STRAM_SWAP
-	{
-		void *swap_data;
-
-		start_mem = (void *) PAGE_ALIGN ((unsigned long) start_mem);
-		/* determine first page to use as swap: if the kernel is
-		   in TT-RAM, this is the first page of (usable) ST-RAM;
-		   otherwise just use the end of kernel data (= start_mem) */
-		swap_start = !kernel_in_stram ? stram_start + PAGE_SIZE : start_mem;
-		/* decrement by one page, rest of kernel assumes that first swap page
-		 * is always reserved and maybe doesn't handle swp_entry == 0
-		 * correctly */
-		swap_start -= PAGE_SIZE;
-		swap_end = stram_end;
-		if (swap_end-swap_start > max_swap_size)
-			swap_end =  swap_start + max_swap_size;
-		DPRINTK( "atari_stram_reserve_pages: swapping enabled; "
-				 "swap=%p-%p\n", swap_start, swap_end);
-
-		/* reserve some amount of memory for maintainance of
-		 * swapping itself: one page for each 2048 (PAGE_SIZE/2)
-		 * swap pages. (2 bytes for each page) */
-		swap_data = start_mem;
-		start_mem += ((SWAP_NR(swap_end) + PAGE_SIZE/2 - 1)
-			      >> (PAGE_SHIFT-1)) << PAGE_SHIFT;
-		/* correct swap_start if necessary */
-		if (swap_start + PAGE_SIZE == swap_data)
-			swap_start = start_mem - PAGE_SIZE;
-
-		if (!swap_init( start_mem, swap_data )) {
-			printk( KERN_ERR "ST-RAM swap space initialization failed\n" );
-			max_swap_size = 0;
-			return;
-		}
-		/* reserve region for swapping meta-data */
-		reserve_region(swap_data, start_mem);
-		/* reserve swapping area itself */
-		reserve_region(swap_start + PAGE_SIZE, swap_end);
-
-		/*
-		 * If the whole ST-RAM is used for swapping, there are no allocatable
-		 * dma pages left. But unfortunately, some shared parts of the kernel
-		 * (particularly the SCSI mid-level) call __get_dma_pages()
-		 * unconditionally :-( These calls then fail, and scsi.c even doesn't
-		 * check for NULL return values and just crashes. The quick fix for
-		 * this (instead of doing much clean up work in the SCSI code) is to
-		 * pretend all pages are DMA-able by setting mach_max_dma_address to
-		 * ULONG_MAX. This doesn't change any functionality so far, since
-		 * get_dma_pages() shouldn't be used on Atari anyway anymore (better
-		 * use atari_stram_alloc()), and the Atari SCSI drivers don't need DMA
-		 * memory. But unfortunately there's now no kind of warning (even not
-		 * a NULL return value) if you use get_dma_pages() nevertheless :-(
-		 * You just will get non-DMA-able memory...
-		 */
-		mach_max_dma_address = 0xffffffff;
-	}
-#endif
 }
 
 void atari_stram_mem_init_hook (void)
@@ -367,7 +166,6 @@ void atari_stram_mem_init_hook (void)
 
 /*
  * This is main public interface: somehow allocate a ST-RAM block
- * There are three strategies:
  *
  *  - If we're before mem_init(), we have to make a static allocation. The
  *    region is taken in the kernel data area (if the kernel is in ST-RAM) or
@@ -375,14 +173,9 @@ void atari_stram_mem_init_hook (void)
  *    rsvd_stram_* region. The ST-RAM is somewhere in the middle of kernel
  *    address space in the latter case.
  *
- *  - If mem_init() already has been called and ST-RAM swapping is enabled,
- *    try to get the memory from the (pseudo) swap-space, either free already
- *    or by moving some other pages out of the swap.
- *
- *  - If mem_init() already has been called, and ST-RAM swapping is not
- *    enabled, the only possibility is to try with __get_dma_pages(). This has
- *    the disadvantage that it's very hard to get more than 1 page, and it is
- *    likely to fail :-(
+ *  - If mem_init() already has been called, try with __get_dma_pages().
+ *    This has the disadvantage that it's very hard to get more than 1 page,
+ *    and it is likely to fail :-(
  *
  */
 void *atari_stram_alloc(long size, const char *owner)
@@ -393,27 +186,13 @@ void *atari_stram_alloc(long size, const char *owner)
 
 	DPRINTK("atari_stram_alloc(size=%08lx,owner=%s)\n", size, owner);
 
-	size = ALIGN_IF_SWAP(size);
-	DPRINTK( "atari_stram_alloc: rounded size = %08lx\n", size );
-#ifdef CONFIG_STRAM_SWAP
-	if (max_swap_size) {
-		/* If swapping is active: make some free space in the swap
-		   "device". */
-		DPRINTK( "atari_stram_alloc: after mem_init, swapping ok, "
-				 "calling get_region\n" );
-		addr = get_stram_region( N_PAGES(size) );
-		flags = BLOCK_INSWAP;
-	}
-	else
-#endif
 	if (!mem_init_done)
 		return alloc_bootmem_low(size);
 	else {
-		/* After mem_init() and no swapping: can only resort to
-		 * __get_dma_pages() */
+		/* After mem_init(): can only resort to __get_dma_pages() */
 		addr = (void *)__get_dma_pages(GFP_KERNEL, get_order(size));
 		flags = BLOCK_GFP;
-		DPRINTK( "atari_stram_alloc: after mem_init, swapping off, "
+		DPRINTK( "atari_stram_alloc: after mem_init, "
 				 "get_pages=%p\n", addr );
 	}
 
@@ -422,12 +201,7 @@ void *atari_stram_alloc(long size, const char *owner)
 			/* out of memory for BLOCK structure :-( */
 			DPRINTK( "atari_stram_alloc: out of mem for BLOCK -- "
 					 "freeing again\n" );
-#ifdef CONFIG_STRAM_SWAP
-			if (flags == BLOCK_INSWAP)
-				free_stram_region( SWAP_NR(addr), N_PAGES(size) );
-			else
-#endif
-				free_pages((unsigned long)addr, get_order(size));
+			free_pages((unsigned long)addr, get_order(size));
 			return( NULL );
 		}
 		block->owner = owner;
@@ -451,25 +225,12 @@ void atari_stram_free( void *addr )
 	DPRINTK( "atari_stram_free: found block (%p): size=%08lx, owner=%s, "
 			 "flags=%02x\n", block, block->size, block->owner, block->flags );
 
-#ifdef CONFIG_STRAM_SWAP
-	if (!max_swap_size) {
-#endif
-		if (block->flags & BLOCK_GFP) {
-			DPRINTK("atari_stram_free: is kmalloced, order_size=%d\n",
-				get_order(block->size));
-			free_pages((unsigned long)addr, get_order(block->size));
-		}
-		else
-			goto fail;
-#ifdef CONFIG_STRAM_SWAP
-	}
-	else if (block->flags & BLOCK_INSWAP) {
-		DPRINTK( "atari_stram_free: is swap-alloced\n" );
-		free_stram_region( SWAP_NR(block->start), N_PAGES(block->size) );
-	}
-	else
+	if (!(block->flags & BLOCK_GFP))
 		goto fail;
-#endif
+
+	DPRINTK("atari_stram_free: is kmalloced, order_size=%d\n",
+		get_order(block->size));
+	free_pages((unsigned long)addr, get_order(block->size));
 	remove_region( block );
 	return;
 
@@ -478,612 +239,6 @@ void atari_stram_free( void *addr )
 			"(called from %p)\n", addr, __builtin_return_address(0) );
 }
 
-
-#ifdef CONFIG_STRAM_SWAP
-
-
-/* ------------------------------------------------------------------------ */
-/*						   Main Swapping Functions							*/
-/* ------------------------------------------------------------------------ */
-
-
-/*
- * Initialize ST-RAM swap device
- * (lots copied and modified from sys_swapon() in mm/swapfile.c)
- */
-static int __init swap_init(void *start_mem, void *swap_data)
-{
-	static struct dentry fake_dentry;
-	static struct vfsmount fake_vfsmnt;
-	struct swap_info_struct *p;
-	struct inode swap_inode;
-	unsigned int type;
-	void *addr;
-	int i, j, k, prev;
-
-	DPRINTK("swap_init(start_mem=%p, swap_data=%p)\n",
-		start_mem, swap_data);
-
-	/* need at least one page for swapping to (and this also isn't very
-	 * much... :-) */
-	if (swap_end - swap_start < 2*PAGE_SIZE) {
-		printk( KERN_WARNING "stram_swap_init: swap space too small\n" );
-		return( 0 );
-	}
-
-	/* find free slot in swap_info */
-	for( p = swap_info, type = 0; type < nr_swapfiles; type++, p++ )
-		if (!(p->flags & SWP_USED))
-			break;
-	if (type >= MAX_SWAPFILES) {
-		printk( KERN_WARNING "stram_swap_init: max. number of "
-				"swap devices exhausted\n" );
-		return( 0 );
-	}
-	if (type >= nr_swapfiles)
-		nr_swapfiles = type+1;
-
-	stram_swap_info = p;
-	stram_swap_type = type;
-
-	/* fake some dir cache entries to give us some name in /dev/swaps */
-	fake_dentry.d_parent = &fake_dentry;
-	fake_dentry.d_name.name = "stram (internal)";
-	fake_dentry.d_name.len = 16;
-	fake_vfsmnt.mnt_parent = &fake_vfsmnt;
-
-	p->flags        = SWP_USED;
-	p->swap_file    = &fake_dentry;
-	p->swap_vfsmnt  = &fake_vfsmnt;
-	p->swap_map	= swap_data;
-	p->cluster_nr   = 0;
-	p->next         = -1;
-	p->prio         = 0x7ff0;	/* a rather high priority, but not the higest
-								 * to give the user a chance to override */
-
-	/* call stram_open() directly, avoids at least the overhead in
-	 * constructing a dummy file structure... */
-	swap_inode.i_rdev = MKDEV( STRAM_MAJOR, STRAM_MINOR );
-	stram_open( &swap_inode, MAGIC_FILE_P );
-	p->max = SWAP_NR(swap_end);
-
-	/* initialize swap_map: set regions that are already allocated or belong
-	 * to kernel data space to SWAP_MAP_BAD, otherwise to free */
-	j = 0; /* # of free pages */
-	k = 0; /* # of already allocated pages (from pre-mem_init stram_alloc()) */
-	p->lowest_bit = 0;
-	p->highest_bit = 0;
-	for( i = 1, addr = SWAP_ADDR(1); i < p->max;
-		 i++, addr += PAGE_SIZE ) {
-		if (in_some_region( addr )) {
-			p->swap_map[i] = SWAP_MAP_BAD;
-			++k;
-		}
-		else if (kernel_in_stram && addr < start_mem ) {
-			p->swap_map[i] = SWAP_MAP_BAD;
-		}
-		else {
-			p->swap_map[i] = 0;
-			++j;
-			if (!p->lowest_bit) p->lowest_bit = i;
-			p->highest_bit = i;
-		}
-	}
-	/* first page always reserved (and doesn't really belong to swap space) */
-	p->swap_map[0] = SWAP_MAP_BAD;
-
-	/* now swapping to this device ok */
-	p->pages = j + k;
-	swap_list_lock();
-	nr_swap_pages += j;
-	p->flags = SWP_WRITEOK;
-
-	/* insert swap space into swap_list */
-	prev = -1;
-	for (i = swap_list.head; i >= 0; i = swap_info[i].next) {
-		if (p->prio >= swap_info[i].prio) {
-			break;
-		}
-		prev = i;
-	}
-	p->next = i;
-	if (prev < 0) {
-		swap_list.head = swap_list.next = p - swap_info;
-	} else {
-		swap_info[prev].next = p - swap_info;
-	}
-	swap_list_unlock();
-
-	printk( KERN_INFO "Using %dk (%d pages) of ST-RAM as swap space.\n",
-			p->pages << 2, p->pages );
-	return( 1 );
-}
-
-
-/*
- * The swap entry has been read in advance, and we return 1 to indicate
- * that the page has been used or is no longer needed.
- *
- * Always set the resulting pte to be nowrite (the same as COW pages
- * after one process has exited).  We don't know just how many PTEs will
- * share this swap entry, so be cautious and let do_wp_page work out
- * what to do if a write is requested later.
- */
-static inline void unswap_pte(struct vm_area_struct * vma, unsigned long
-			      address, pte_t *dir, swp_entry_t entry,
-			      struct page *page)
-{
-	pte_t pte = *dir;
-
-	if (pte_none(pte))
-		return;
-	if (pte_present(pte)) {
-		/* If this entry is swap-cached, then page must already
-                   hold the right address for any copies in physical
-                   memory */
-		if (pte_page(pte) != page)
-			return;
-		/* We will be removing the swap cache in a moment, so... */
-		set_pte(dir, pte_mkdirty(pte));
-		return;
-	}
-	if (pte_val(pte) != entry.val)
-		return;
-
-	DPRINTK("unswap_pte: replacing entry %08lx by new page %p",
-		entry.val, page);
-	set_pte(dir, pte_mkdirty(mk_pte(page, vma->vm_page_prot)));
-	swap_free(entry);
-	get_page(page);
-	inc_mm_counter(vma->vm_mm, rss);
-}
-
-static inline void unswap_pmd(struct vm_area_struct * vma, pmd_t *dir,
-			      unsigned long address, unsigned long size,
-			      unsigned long offset, swp_entry_t entry,
-			      struct page *page)
-{
-	pte_t * pte;
-	unsigned long end;
-
-	if (pmd_none(*dir))
-		return;
-	if (pmd_bad(*dir)) {
-		pmd_ERROR(*dir);
-		pmd_clear(dir);
-		return;
-	}
-	pte = pte_offset_kernel(dir, address);
-	offset += address & PMD_MASK;
-	address &= ~PMD_MASK;
-	end = address + size;
-	if (end > PMD_SIZE)
-		end = PMD_SIZE;
-	do {
-		unswap_pte(vma, offset+address-vma->vm_start, pte, entry, page);
-		address += PAGE_SIZE;
-		pte++;
-	} while (address < end);
-}
-
-static inline void unswap_pgd(struct vm_area_struct * vma, pgd_t *dir,
-			      unsigned long address, unsigned long size,
-			      swp_entry_t entry, struct page *page)
-{
-	pmd_t * pmd;
-	unsigned long offset, end;
-
-	if (pgd_none(*dir))
-		return;
-	if (pgd_bad(*dir)) {
-		pgd_ERROR(*dir);
-		pgd_clear(dir);
-		return;
-	}
-	pmd = pmd_offset(dir, address);
-	offset = address & PGDIR_MASK;
-	address &= ~PGDIR_MASK;
-	end = address + size;
-	if (end > PGDIR_SIZE)
-		end = PGDIR_SIZE;
-	do {
-		unswap_pmd(vma, pmd, address, end - address, offset, entry,
-			   page);
-		address = (address + PMD_SIZE) & PMD_MASK;
-		pmd++;
-	} while (address < end);
-}
-
-static void unswap_vma(struct vm_area_struct * vma, pgd_t *pgdir,
-		       swp_entry_t entry, struct page *page)
-{
-	unsigned long start = vma->vm_start, end = vma->vm_end;
-
-	do {
-		unswap_pgd(vma, pgdir, start, end - start, entry, page);
-		start = (start + PGDIR_SIZE) & PGDIR_MASK;
-		pgdir++;
-	} while (start < end);
-}
-
-static void unswap_process(struct mm_struct * mm, swp_entry_t entry,
-			   struct page *page)
-{
-	struct vm_area_struct* vma;
-
-	/*
-	 * Go through process' page directory.
-	 */
-	if (!mm)
-		return;
-	for (vma = mm->mmap; vma; vma = vma->vm_next) {
-		pgd_t * pgd = pgd_offset(mm, vma->vm_start);
-		unswap_vma(vma, pgd, entry, page);
-	}
-}
-
-
-static int unswap_by_read(unsigned short *map, unsigned long max,
-			  unsigned long start, unsigned long n_pages)
-{
-	struct task_struct *p;
-	struct page *page;
-	swp_entry_t entry;
-	unsigned long i;
-
-	DPRINTK( "unswapping %lu..%lu by reading in\n",
-			 start, start+n_pages-1 );
-
-	for( i = start; i < start+n_pages; ++i ) {
-		if (map[i] == SWAP_MAP_BAD) {
-			printk( KERN_ERR "get_stram_region: page %lu already "
-					"reserved??\n", i );
-			continue;
-		}
-
-		if (map[i]) {
-			entry = swp_entry(stram_swap_type, i);
-			DPRINTK("unswap: map[i=%lu]=%u nr_swap=%ld\n",
-				i, map[i], nr_swap_pages);
-
-			swap_device_lock(stram_swap_info);
-			map[i]++;
-			swap_device_unlock(stram_swap_info);
-			/* Get a page for the entry, using the existing
-			   swap cache page if there is one.  Otherwise,
-			   get a clean page and read the swap into it. */
-			page = read_swap_cache_async(entry, NULL, 0);
-			if (!page) {
-				swap_free(entry);
-				return -ENOMEM;
-			}
-			read_lock(&tasklist_lock);
-			for_each_process(p)
-				unswap_process(p->mm, entry, page);
-			read_unlock(&tasklist_lock);
-			shmem_unuse(entry, page);
-			/* Now get rid of the extra reference to the
-			   temporary page we've been using. */
-			if (PageSwapCache(page))
-				delete_from_swap_cache(page);
-			__free_page(page);
-	#ifdef DO_PROC
-			stat_swap_force++;
-	#endif
-		}
-
-		DPRINTK( "unswap: map[i=%lu]=%u nr_swap=%ld\n",
-				 i, map[i], nr_swap_pages );
-		swap_list_lock();
-		swap_device_lock(stram_swap_info);
-		map[i] = SWAP_MAP_BAD;
-		if (stram_swap_info->lowest_bit == i)
-			stram_swap_info->lowest_bit++;
-		if (stram_swap_info->highest_bit == i)
-			stram_swap_info->highest_bit--;
-		--nr_swap_pages;
-		swap_device_unlock(stram_swap_info);
-		swap_list_unlock();
-	}
-
-	return 0;
-}
-
-/*
- * reserve a region in ST-RAM swap space for an allocation
- */
-static void *get_stram_region( unsigned long n_pages )
-{
-	unsigned short *map = stram_swap_info->swap_map;
-	unsigned long max = stram_swap_info->max;
-	unsigned long start, total_free, region_free;
-	int err;
-	void *ret = NULL;
-
-	DPRINTK( "get_stram_region(n_pages=%lu)\n", n_pages );
-
-	down(&stram_swap_sem);
-
-	/* disallow writing to the swap device now */
-	stram_swap_info->flags = SWP_USED;
-
-	/* find a region of n_pages pages in the swap space including as much free
-	 * pages as possible (and excluding any already-reserved pages). */
-	if (!(start = find_free_region( n_pages, &total_free, &region_free )))
-		goto end;
-	DPRINTK( "get_stram_region: region starts at %lu, has %lu free pages\n",
-			 start, region_free );
-
-	err = unswap_by_read(map, max, start, n_pages);
-	if (err)
-		goto end;
-
-	ret = SWAP_ADDR(start);
-  end:
-	/* allow using swap device again */
-	stram_swap_info->flags = SWP_WRITEOK;
-	up(&stram_swap_sem);
-	DPRINTK( "get_stram_region: returning %p\n", ret );
-	return( ret );
-}
-
-
-/*
- * free a reserved region in ST-RAM swap space
- */
-static void free_stram_region( unsigned long offset, unsigned long n_pages )
-{
-	unsigned short *map = stram_swap_info->swap_map;
-
-	DPRINTK( "free_stram_region(offset=%lu,n_pages=%lu)\n", offset, n_pages );
-
-	if (offset < 1 || offset + n_pages > stram_swap_info->max) {
-		printk( KERN_ERR "free_stram_region: Trying to free non-ST-RAM\n" );
-		return;
-	}
-
-	swap_list_lock();
-	swap_device_lock(stram_swap_info);
-	/* un-reserve the freed pages */
-	for( ; n_pages > 0; ++offset, --n_pages ) {
-		if (map[offset] != SWAP_MAP_BAD)
-			printk( KERN_ERR "free_stram_region: Swap page %lu was not "
-					"reserved\n", offset );
-		map[offset] = 0;
-	}
-
-	/* update swapping meta-data */
-	if (offset < stram_swap_info->lowest_bit)
-		stram_swap_info->lowest_bit = offset;
-	if (offset+n_pages-1 > stram_swap_info->highest_bit)
-		stram_swap_info->highest_bit = offset+n_pages-1;
-	if (stram_swap_info->prio > swap_info[swap_list.next].prio)
-		swap_list.next = swap_list.head;
-	nr_swap_pages += n_pages;
-	swap_device_unlock(stram_swap_info);
-	swap_list_unlock();
-}
-
-
-/* ------------------------------------------------------------------------ */
-/*						Utility Functions for Swapping						*/
-/* ------------------------------------------------------------------------ */
-
-
-/* is addr in some of the allocated regions? */
-static int in_some_region(void *addr)
-{
-	BLOCK *p;
-
-	for( p = alloc_list; p; p = p->next ) {
-		if (p->start <= addr && addr < p->start + p->size)
-			return( 1 );
-	}
-	return( 0 );
-}
-
-
-static unsigned long find_free_region(unsigned long n_pages,
-				      unsigned long *total_free,
-				      unsigned long *region_free)
-{
-	unsigned short *map = stram_swap_info->swap_map;
-	unsigned long max = stram_swap_info->max;
-	unsigned long head, tail, max_start;
-	long nfree, max_free;
-
-	/* first scan the swap space for a suitable place for the allocation */
-	head = 1;
-	max_start = 0;
-	max_free = -1;
-	*total_free = 0;
-
-  start_over:
-	/* increment tail until final window size reached, and count free pages */
-	nfree = 0;
-	for( tail = head; tail-head < n_pages && tail < max; ++tail ) {
-		if (map[tail] == SWAP_MAP_BAD) {
-			head = tail+1;
-			goto start_over;
-		}
-		if (!map[tail]) {
-			++nfree;
-			++*total_free;
-		}
-	}
-	if (tail-head < n_pages)
-		goto out;
-	if (nfree > max_free) {
-		max_start = head;
-		max_free  = nfree;
-		if (max_free >= n_pages)
-			/* don't need more free pages... :-) */
-			goto out;
-	}
-
-	/* now shift the window and look for the area where as much pages as
-	 * possible are free */
-	while( tail < max ) {
-		nfree -= (map[head++] == 0);
-		if (map[tail] == SWAP_MAP_BAD) {
-			head = tail+1;
-			goto start_over;
-		}
-		if (!map[tail]) {
-			++nfree;
-			++*total_free;
-		}
-		++tail;
-		if (nfree > max_free) {
-			max_start = head;
-			max_free  = nfree;
-			if (max_free >= n_pages)
-				/* don't need more free pages... :-) */
-				goto out;
-		}
-	}
-
-  out:
-	if (max_free < 0) {
-		printk( KERN_NOTICE "get_stram_region: ST-RAM too full or fragmented "
-				"-- can't allocate %lu pages\n", n_pages );
-		return( 0 );
-	}
-
-	*region_free = max_free;
-	return( max_start );
-}
-
-
-/* setup parameters from command line */
-void __init stram_swap_setup(char *str, int *ints)
-{
-	if (ints[0] >= 1)
-		max_swap_size = ((ints[1] < 0 ? 0 : ints[1]) * 1024) & PAGE_MASK;
-}
-
-
-/* ------------------------------------------------------------------------ */
-/*								ST-RAM device								*/
-/* ------------------------------------------------------------------------ */
-
-static int refcnt;
-
-static void do_stram_request(request_queue_t *q)
-{
-	struct request *req;
-
-	while ((req = elv_next_request(q)) != NULL) {
-		void *start = swap_start + (req->sector << 9);
-		unsigned long len = req->current_nr_sectors << 9;
-		if ((start + len) > swap_end) {
-			printk( KERN_ERR "stram: bad access beyond end of device: "
-					"block=%ld, count=%d\n",
-					req->sector,
-					req->current_nr_sectors );
-			end_request(req, 0);
-			continue;
-		}
-
-		if (req->cmd == READ) {
-			memcpy(req->buffer, start, len);
-#ifdef DO_PROC
-			stat_swap_read += N_PAGES(len);
-#endif
-		}
-		else {
-			memcpy(start, req->buffer, len);
-#ifdef DO_PROC
-			stat_swap_write += N_PAGES(len);
-#endif
-		}
-		end_request(req, 1);
-	}
-}
-
-
-static int stram_open( struct inode *inode, struct file *filp )
-{
-	if (filp != MAGIC_FILE_P) {
-		printk( KERN_NOTICE "Only kernel can open ST-RAM device\n" );
-		return( -EPERM );
-	}
-	if (refcnt)
-		return( -EBUSY );
-	++refcnt;
-	return( 0 );
-}
-
-static int stram_release( struct inode *inode, struct file *filp )
-{
-	if (filp != MAGIC_FILE_P) {
-		printk( KERN_NOTICE "Only kernel can close ST-RAM device\n" );
-		return( -EPERM );
-	}
-	if (refcnt > 0)
-		--refcnt;
-	return( 0 );
-}
-
-
-static struct block_device_operations stram_fops = {
-	.open =		stram_open,
-	.release =	stram_release,
-};
-
-static struct gendisk *stram_disk;
-static struct request_queue *stram_queue;
-static DEFINE_SPINLOCK(stram_lock);
-
-int __init stram_device_init(void)
-{
-	if (!MACH_IS_ATARI)
-		/* no point in initializing this, I hope */
-		return -ENXIO;
-
-	if (!max_swap_size)
-		/* swapping not enabled */
-		return -ENXIO;
-	stram_disk = alloc_disk(1);
-	if (!stram_disk)
-		return -ENOMEM;
-
-	if (register_blkdev(STRAM_MAJOR, "stram")) {
-		put_disk(stram_disk);
-		return -ENXIO;
-	}
-
-	stram_queue = blk_init_queue(do_stram_request, &stram_lock);
-	if (!stram_queue) {
-		unregister_blkdev(STRAM_MAJOR, "stram");
-		put_disk(stram_disk);
-		return -ENOMEM;
-	}
-
-	stram_disk->major = STRAM_MAJOR;
-	stram_disk->first_minor = STRAM_MINOR;
-	stram_disk->fops = &stram_fops;
-	stram_disk->queue = stram_queue;
-	sprintf(stram_disk->disk_name, "stram");
-	set_capacity(stram_disk, (swap_end - swap_start)/512);
-	add_disk(stram_disk);
-	return 0;
-}
-
-
-
-/* ------------------------------------------------------------------------ */
-/*							Misc Utility Functions							*/
-/* ------------------------------------------------------------------------ */
-
-/* reserve a range of pages */
-static void reserve_region(void *start, void *end)
-{
-	reserve_bootmem (virt_to_phys(start), end - start);
-}
-
-#endif /* CONFIG_STRAM_SWAP */
-
 
 /* ------------------------------------------------------------------------ */
 /*							  Region Management								*/
@@ -1173,50 +328,9 @@ int get_stram_list( char *buf )
 {
 	int len = 0;
 	BLOCK *p;
-#ifdef CONFIG_STRAM_SWAP
-	int i;
-	unsigned short *map = stram_swap_info->swap_map;
-	unsigned long max = stram_swap_info->max;
-	unsigned free = 0, used = 0, rsvd = 0;
-#endif
 
-#ifdef CONFIG_STRAM_SWAP
-	if (max_swap_size) {
-		for( i = 1; i < max; ++i ) {
-			if (!map[i])
-				++free;
-			else if (map[i] == SWAP_MAP_BAD)
-				++rsvd;
-			else
-				++used;
-		}
-		PRINT_PROC(
-			"Total ST-RAM:      %8u kB\n"
-			"Total ST-RAM swap: %8lu kB\n"
-			"Free swap:         %8u kB\n"
-			"Used swap:         %8u kB\n"
-			"Allocated swap:    %8u kB\n"
-			"Swap Reads:        %8u\n"
-			"Swap Writes:       %8u\n"
-			"Swap Forced Reads: %8u\n",
-			(stram_end - stram_start) >> 10,
-			(max-1) << (PAGE_SHIFT-10),
-			free << (PAGE_SHIFT-10),
-			used << (PAGE_SHIFT-10),
-			rsvd << (PAGE_SHIFT-10),
-			stat_swap_read,
-			stat_swap_write,
-			stat_swap_force );
-	}
-	else {
-#endif
-		PRINT_PROC( "ST-RAM swapping disabled\n" );
-		PRINT_PROC("Total ST-RAM:      %8u kB\n",
+	PRINT_PROC("Total ST-RAM:      %8u kB\n",
 			   (stram_end - stram_start) >> 10);
-#ifdef CONFIG_STRAM_SWAP
-	}
-#endif
-
 	PRINT_PROC( "Allocated regions:\n" );
 	for( p = alloc_list; p; p = p->next ) {
 		if (len + 50 >= PAGE_SIZE)
@@ -1227,8 +341,6 @@ int get_stram_list( char *buf )
 			   p->owner);
 		if (p->flags & BLOCK_GFP)
 			PRINT_PROC( "page-alloced)\n" );
-		else if (p->flags & BLOCK_INSWAP)
-			PRINT_PROC( "in swap)\n" );
 		else
 			PRINT_PROC( "??)\n" );
 	}
diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c
index 8ed1b01a6a87..f7f1d2e5b90b 100644
--- a/arch/m68k/kernel/ptrace.c
+++ b/arch/m68k/kernel/ptrace.c
@@ -121,7 +121,7 @@ void ptrace_disable(struct task_struct *child)
 	child->thread.work.syscall_trace = 0;
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
 {
 	struct task_struct *child;
 	unsigned long tmp;
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index 4ec95e3cb874..98e4b1adfa29 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -27,10 +27,6 @@
 #include <linux/timex.h>
 #include <linux/profile.h>
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 static inline int set_rtc_mmss(unsigned long nowtime)
 {
   if (mach_set_clock_mmss)
diff --git a/arch/m68k/mm/kmap.c b/arch/m68k/mm/kmap.c
index 5dcb3fa35ea9..fe2383e36b06 100644
--- a/arch/m68k/mm/kmap.c
+++ b/arch/m68k/mm/kmap.c
@@ -201,7 +201,7 @@ void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag)
 			virtaddr += PTRTREESIZE;
 			size -= PTRTREESIZE;
 		} else {
-			pte_dir = pte_alloc_kernel(&init_mm, pmd_dir, virtaddr);
+			pte_dir = pte_alloc_kernel(pmd_dir, virtaddr);
 			if (!pte_dir) {
 				printk("ioremap: no mem for pte_dir\n");
 				return NULL;
diff --git a/arch/m68k/sun3x/dvma.c b/arch/m68k/sun3x/dvma.c
index 32e55adfeb8e..117481e86305 100644
--- a/arch/m68k/sun3x/dvma.c
+++ b/arch/m68k/sun3x/dvma.c
@@ -116,7 +116,7 @@ inline int dvma_map_cpu(unsigned long kaddr,
 			pte_t *pte;
 			unsigned long end3;
 
-			if((pte = pte_alloc_kernel(&init_mm, pmd, vaddr)) == NULL) {
+			if((pte = pte_alloc_kernel(pmd, vaddr)) == NULL) {
 				ret = -ENOMEM;
 				goto out;
 			}
diff --git a/arch/m68knommu/kernel/ptrace.c b/arch/m68knommu/kernel/ptrace.c
index 9724e1cd82e5..621d7b91ccfe 100644
--- a/arch/m68knommu/kernel/ptrace.c
+++ b/arch/m68knommu/kernel/ptrace.c
@@ -101,7 +101,7 @@ void ptrace_disable(struct task_struct *child)
 	put_reg(child, PT_SR, tmp);
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
 {
 	struct task_struct *child;
 	int ret;
diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c
index b17c1ecba966..b9d8abb45430 100644
--- a/arch/m68knommu/kernel/time.c
+++ b/arch/m68knommu/kernel/time.c
@@ -27,10 +27,6 @@
 
 #define	TICK_SIZE (tick_nsec / 1000)
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 extern unsigned long wall_jiffies;
 
 
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 4cd724c05700..0097a0d53b3b 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -4,216 +4,147 @@ config MIPS
 	# Horrible source of confusion.  Die, die, die ...
 	select EMBEDDED
 
-# shouldn't it be per-subarchitecture?
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-	default y
-
 mainmenu "Linux/MIPS Kernel Configuration"
 
 source "init/Kconfig"
 
-config SYS_SUPPORTS_32BIT_KERNEL
-	bool
-config SYS_SUPPORTS_64BIT_KERNEL
-	bool
-config CPU_SUPPORTS_32BIT_KERNEL
-	bool
-config CPU_SUPPORTS_64BIT_KERNEL
-	bool
-
-menu "Kernel type"
-
-choice
-
-	prompt "Kernel code model"
-	help
-	  You should only select this option if you have a workload that
-	  actually benefits from 64-bit processing or if your machine has
-	  large memory.  You will only be presented a single option in this
-	  menu if your system does not support both 32-bit and 64-bit kernels.
-
-config 32BIT
-	bool "32-bit kernel"
-	depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL
-	select TRAD_SIGNALS
-	help
-	  Select this option if you want to build a 32-bit kernel.
-
-config 64BIT
-	bool "64-bit kernel"
-	depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
-	help
-	  Select this option if you want to build a 64-bit kernel.
-
-endchoice
-
-endmenu
-
 menu "Machine selection"
 
-config MACH_JAZZ
-	bool "Support for the Jazz family of machines"
-	select ARC
-	select ARC32
-	select GENERIC_ISA_DMA
-	select I8259
-	select ISA
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-	help
-	 This a family of machines based on the MIPS R4030 chipset which was
-	 used by several vendors to build RISC/os and Windows NT workstations.
-	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
-	 Olivetti M700-10 workstations.
+choice
+	prompt "System type"
+	default SGI_IP22
 
-config ACER_PICA_61
-	bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)"
-	depends on MACH_JAZZ && EXPERIMENTAL
+config MIPS_MTX1
+	bool "Support for 4G Systems MTX-1 board"
 	select DMA_NONCOHERENT
-	help
-	  This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
-	  kernel that runs on these, say Y here. For details about Linux on
-	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-	  <http://www.linux-mips.org/>.
+	select HW_HAS_PCI
+	select SOC_AU1500
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config MIPS_MAGNUM_4000
-	bool "Support for MIPS Magnum 4000"
-	depends on MACH_JAZZ
+config MIPS_BOSPORUS
+	bool "AMD Alchemy Bosporus board"
+	select SOC_AU1500
 	select DMA_NONCOHERENT
-	help
-	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
-	  kernel that runs on these, say Y here. For details about Linux on
-	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-	  <http://www.linux-mips.org/>.
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config OLIVETTI_M700
-	bool "Support for Olivetti M700-10"
-	depends on MACH_JAZZ
+config MIPS_PB1000
+	bool "AMD Alchemy PB1000 board"
+	select SOC_AU1000
 	select DMA_NONCOHERENT
-	help
-	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
-	  kernel that runs on these, say Y here. For details about Linux on
-	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-	  <http://www.linux-mips.org/>.
-
-config MACH_VR41XX
-	bool "Support for NEC VR4100 series based machines"
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select HW_HAS_PCI
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config NEC_CMBVR4133
-	bool "Support for NEC CMB-VR4133"
-	depends on MACH_VR41XX
-	select CPU_VR41XX
+config MIPS_PB1100
+	bool "AMD Alchemy PB1100 board"
+	select SOC_AU1100
 	select DMA_NONCOHERENT
-	select IRQ_CPU
 	select HW_HAS_PCI
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config ROCKHOPPER
-	bool "Support for Rockhopper baseboard"
-	depends on NEC_CMBVR4133
-	select I8259
-	select HAVE_STD_PC_SERIAL_PORT
+config MIPS_PB1500
+	bool "AMD Alchemy PB1500 board"
+	select SOC_AU1500
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config CASIO_E55
-	bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
-	depends on MACH_VR41XX
-	select CPU_LITTLE_ENDIAN
+config MIPS_PB1550
+	bool "AMD Alchemy PB1550 board"
+	select SOC_AU1550
 	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select ISA
+	select HW_HAS_PCI
+	select MIPS_DISABLE_OBSOLETE_IDE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config IBM_WORKPAD
-	bool "Support for IBM WorkPad z50"
-	depends on MACH_VR41XX
-	select CPU_LITTLE_ENDIAN
+config MIPS_PB1200
+	bool "AMD Alchemy PB1200 board"
+	select SOC_AU1200
 	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select ISA
+	select MIPS_DISABLE_OBSOLETE_IDE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config TANBAC_TB022X
-	bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
-	depends on MACH_VR41XX
-	select CPU_LITTLE_ENDIAN
+config MIPS_DB1000
+	bool "AMD Alchemy DB1000 board"
+	select SOC_AU1000
 	select DMA_NONCOHERENT
-	select IRQ_CPU
 	select HW_HAS_PCI
-	help
-	  The TANBAC VR4131 multichip module(TB0225) and
-	  the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms
-	  manufactured by TANBAC.
-	  Please refer to <http://www.tanbac.co.jp/>
-	  about VR4131 multichip module and VR4131DIMM.
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config TANBAC_TB0226
-	bool "Support for TANBAC Mbase(TB0226)"
-	depends on TANBAC_TB022X
-	select GPIO_VR41XX
-	help
-	  The TANBAC Mbase(TB0226) is a MIPS-based platform manufactured by TANBAC.
-	  Please refer to <http://www.tanbac.co.jp/> about Mbase.
-
-config TANBAC_TB0287
-	bool "Support for TANBAC Mini-ITX DIMM base(TB0287)"
-	depends on TANBAC_TB022X
-	help
-	  The TANBAC Mini-ITX DIMM base(TB0287) is a MIPS-based platform manufactured by TANBAC.
-	  Please refer to <http://www.tanbac.co.jp/> about Mini-ITX DIMM base.
-
-config VICTOR_MPC30X
-	bool "Support for Victor MP-C303/304"
-	depends on MACH_VR41XX
-	select CPU_LITTLE_ENDIAN
+config MIPS_DB1100
+	bool "AMD Alchemy DB1100 board"
+	select SOC_AU1100
 	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select HW_HAS_PCI
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config ZAO_CAPCELLA
-	bool "Support for ZAO Networks Capcella"
-	depends on MACH_VR41XX
-	select CPU_LITTLE_ENDIAN
+config MIPS_DB1500
+	bool "AMD Alchemy DB1500 board"
+	select SOC_AU1500
 	select DMA_NONCOHERENT
-	select IRQ_CPU
 	select HW_HAS_PCI
+	select MIPS_DISABLE_OBSOLETE_IDE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config PCI_VR41XX
-	bool "Add PCI control unit support of NEC VR4100 series"
-	depends on MACH_VR41XX && HW_HAS_PCI
-	default y
-	select PCI
+config MIPS_DB1550
+	bool "AMD Alchemy DB1550 board"
+	select SOC_AU1550
+	select HW_HAS_PCI
+	select DMA_NONCOHERENT
+	select MIPS_DISABLE_OBSOLETE_IDE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config VRC4173
-	tristate "Add NEC VRC4173 companion chip support"
-	depends on MACH_VR41XX && PCI_VR41XX
-	---help---
-	  The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
+config MIPS_DB1200
+	bool "AMD Alchemy DB1200 board"
+	select SOC_AU1200
+	select DMA_COHERENT
+	select MIPS_DISABLE_OBSOLETE_IDE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config TOSHIBA_JMR3927
-	bool "Support for Toshiba JMR-TX3927 board"
+config MIPS_MIRAGE
+	bool "AMD Alchemy Mirage board"
 	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select SWAP_IO_SPACE
-	select SYS_SUPPORTS_32BIT_KERNEL
+	select SOC_AU1500
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MIPS_COBALT
 	bool "Support for Cobalt Server"
-	depends on EXPERIMENTAL
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select I8259
 	select IRQ_CPU
+	select MIPS_GT64111
+	select SYS_HAS_CPU_NEVADA
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MACH_DECSTATION
 	bool "Support for DECstations"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
+	select EARLY_PRINTK
 	select IRQ_CPU
+	select SYS_HAS_CPU_R3000
+	select SYS_HAS_CPU_R4X00
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-	---help---
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	help
 	  This enables support for DEC's MIPS based workstations.  For details
 	  see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
 	  DECstation porting pages on <http://decstation.unix-ag.org/>.
@@ -234,8 +165,10 @@ config MIPS_EV64120
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select MIPS_GT64120
+	select SYS_HAS_CPU_R5000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
 	  This is an evaluation board based on the Galileo GT-64120
 	  single-chip system controller that contains a MIPS R5000 compatible
@@ -243,10 +176,6 @@ config MIPS_EV64120
 	  <http://www.marvell.com/>.  Say Y here if you wish to build a
 	  kernel for this platform.
 
-config EVB_PCI1
-	bool "Enable Second PCI (PCI1)"
-	depends on MIPS_EV64120
-
 config MIPS_EV96100
 	bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
@@ -256,8 +185,11 @@ config MIPS_EV96100
 	select MIPS_GT96100
 	select RM7000_CPU_SCACHE
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_R5000
+	select SYS_HAS_CPU_RM7000
 	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
 	  This is an evaluation board based on the Galileo GT-96100 LAN/WAN
 	  communications controllers containing a MIPS R5000 compatible core
@@ -268,8 +200,11 @@ config MIPS_IVR
 	bool "Support for Globespan IVR board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
+	select ITE_BOARD_GEN
+	select SYS_HAS_CPU_NEVADA
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This is an evaluation board built by Globespan to showcase thir
 	  iVR (Internet Video Recorder) design. It utilizes a QED RM5231
@@ -277,37 +212,16 @@ config MIPS_IVR
 	  located at <http://www.globespan.net/>. Say Y here if you wish to
 	  build a kernel for this platform.
 
-config LASAT
-	bool "Support for LASAT Networks platforms"
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select MIPS_GT64120
-	select R5000_CPU_SCACHE
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-
-config PICVUE
-	tristate "PICVUE LCD display driver"
-	depends on LASAT
-
-config PICVUE_PROC
-	tristate "PICVUE LCD display driver /proc interface"
-	depends on PICVUE
-
-config DS1603
-	bool "DS1603 RTC driver"
-	depends on LASAT
-
-config LASAT_SYSCTL
-	bool "LASAT sysctl interface"
-	depends on LASAT
-
 config MIPS_ITE8172
 	bool "Support for ITE 8172G board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
+	select ITE_BOARD_GEN
+	select SYS_HAS_CPU_R5432
+	select SYS_HAS_CPU_NEVADA
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
 	  with ATX form factor that utilizes a MIPS R5000 to work with its
@@ -315,42 +229,86 @@ config MIPS_ITE8172
 	  either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
 	  a kernel for this platform.
 
-config IT8172_REVC
-	bool "Support for older IT8172 (Rev C)"
-	depends on MIPS_ITE8172
+config MACH_JAZZ
+	bool "Support for the Jazz family of machines"
+	select ARC
+	select ARC32
+	select ARCH_MAY_HAVE_PC_FDC
+	select GENERIC_ISA_DMA
+	select I8259
+	select ISA
+	select SYS_HAS_CPU_R4X00
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
 	help
-	  Say Y here to support the older, Revision C version of the Integrated
-	  Technology Express, Inc. ITE8172 SBC.  Vendor page at
-	  <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
-	  board at <http://www.mvista.com/partners/semiconductor/ite.html>.
+	 This a family of machines based on the MIPS R4030 chipset which was
+	 used by several vendors to build RISC/os and Windows NT workstations.
+	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
+	 Olivetti M700-10 workstations.
+
+config LASAT
+	bool "Support for LASAT Networks platforms"
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select MIPS_GT64120
+	select MIPS_NILE4
+	select R5000_CPU_SCACHE
+	select SYS_HAS_CPU_R5000
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MIPS_ATLAS
 	bool "Support for MIPS Atlas board"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
+	select IRQ_CPU
 	select HW_HAS_PCI
+	select MIPS_BOARDS_GEN
+	select MIPS_BONITO64
 	select MIPS_GT64120
+	select MIPS_MSC
+	select RM7000_CPU_SCACHE
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_CPU_MIPS64_R1
+	select SYS_HAS_CPU_NEVADA
+	select SYS_HAS_CPU_RM7000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
-	  This enables support for the QED R5231-based MIPS Atlas evaluation
+	  This enables support for the MIPS Technologies Atlas evaluation
 	  board.
 
 config MIPS_MALTA
 	bool "Support for MIPS Malta board"
+	select ARCH_MAY_HAVE_PC_FDC
 	select BOOT_ELF32
 	select HAVE_STD_PC_SERIAL_PORT
 	select DMA_NONCOHERENT
+	select IRQ_CPU
 	select GENERIC_ISA_DMA
 	select HW_HAS_PCI
 	select I8259
+	select MIPS_BOARDS_GEN
+	select MIPS_BONITO64
 	select MIPS_GT64120
+	select MIPS_MSC
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_CPU_MIPS64_R1
+	select SYS_HAS_CPU_NEVADA
+	select SYS_HAS_CPU_RM7000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
-	  This enables support for the VR5000-based MIPS Malta evaluation
+	  This enables support for the MIPS Technologies Malta evaluation
 	  board.
 
 config MIPS_SEAD
@@ -358,50 +316,64 @@ config MIPS_SEAD
 	depends on EXPERIMENTAL
 	select IRQ_CPU
 	select DMA_NONCOHERENT
+	select MIPS_BOARDS_GEN
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_CPU_MIPS64_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	help
+	  This enables support for the MIPS Technologies SEAD evaluation
+	  board.
 
-config MOMENCO_OCELOT
-	bool "Support for Momentum Ocelot board"
+config MIPS_SIM
+	bool 'Support for MIPS simulator (MIPSsim)'
 	select DMA_NONCOHERENT
-	select HW_HAS_PCI
 	select IRQ_CPU
-	select IRQ_CPU_RM7K
-	select MIPS_GT64120
-	select RM7000_CPU_SCACHE
-	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
-	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
-	  Momentum Computer <http://www.momenco.com/>.
+	  This option enables support for MIPS Technologies MIPSsim software
+	  emulator.
 
-config MOMENCO_OCELOT_G
-	bool "Support for Momentum Ocelot-G board"
+config MOMENCO_JAGUAR_ATX
+	bool "Support for Momentum Jaguar board"
+	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select IRQ_CPU_RM7K
+	select IRQ_MV64340
+	select LIMITED_DMA
 	select PCI_MARVELL
 	select RM7000_CPU_SCACHE
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_RM9000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
-	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+	  The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
 	  Momentum Computer <http://www.momenco.com/>.
 
-config MOMENCO_OCELOT_C
-	bool "Support for Momentum Ocelot-C board"
+config MOMENCO_OCELOT
+	bool "Support for Momentum Ocelot board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
-	select IRQ_MV64340
-	select PCI_MARVELL
+	select IRQ_CPU_RM7K
+	select MIPS_GT64120
 	select RM7000_CPU_SCACHE
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_RM7000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
 	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
 	  Momentum Computer <http://www.momenco.com/>.
@@ -417,80 +389,95 @@ config MOMENCO_OCELOT_3
 	select PCI_MARVELL
 	select RM7000_CPU_SCACHE
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_RM9000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
 	  The Ocelot-3 is based off Discovery III System Controller and
 	  PMC-Sierra Rm79000 core.
 
-config MOMENCO_JAGUAR_ATX
-	bool "Support for Momentum Jaguar board"
-	select BOOT_ELF32
+config MOMENCO_OCELOT_C
+	bool "Support for Momentum Ocelot-C board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
-	select IRQ_CPU_RM7K
 	select IRQ_MV64340
-	select LIMITED_DMA
 	select PCI_MARVELL
 	select RM7000_CPU_SCACHE
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_RM7000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
-	  The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
+	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
 	  Momentum Computer <http://www.momenco.com/>.
 
-config JAGUAR_DMALOW
-	bool "Low DMA Mode"
-	depends on MOMENCO_JAGUAR_ATX
-	help
-	  Select to Y if jump JP5 is set on your board, N otherwise.  Normally
-	  the jumper is set, so if you feel unsafe, just say Y.
-
-config PMC_YOSEMITE
-	bool "Support for PMC-Sierra Yosemite eval board"
-	select DMA_COHERENT
+config MOMENCO_OCELOT_G
+	bool "Support for Momentum Ocelot-G board"
+	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select IRQ_CPU_RM7K
-	select IRQ_CPU_RM9K
+	select PCI_MARVELL
+	select RM7000_CPU_SCACHE
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_RM7000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
-	  Yosemite is an evaluation board for the RM9000x2 processor
-	  manufactured by PMC-Sierra
+	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+	  Momentum Computer <http://www.momenco.com/>.
 
-config HYPERTRANSPORT
-	bool "Hypertransport Support for PMC-Sierra Yosemite"
-	depends on PMC_YOSEMITE
+config MIPS_XXS1500
+	bool "Support for MyCable XXS1500 board"
+	select DMA_NONCOHERENT
+	select SOC_AU1500
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config PNX8550_V2PCI
+	bool "Support for Philips PNX8550 based Viper2-PCI board"
+	select PNX8550
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config PNX8550_JBS
+	bool "Support for Philips PNX8550 based JBS board"
+	select PNX8550
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config DDB5074
 	bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
+	select DDB5XXX_COMMON
 	select DMA_NONCOHERENT
 	select HAVE_STD_PC_SERIAL_PORT
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select I8259
 	select ISA
+	select SYS_HAS_CPU_R5000
 	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This enables support for the VR5000-based NEC DDB Vrc-5074
 	  evaluation board.
 
 config DDB5476
 	bool "Support for NEC DDB Vrc-5476"
+	select DDB5XXX_COMMON
 	select DMA_NONCOHERENT
 	select HAVE_STD_PC_SERIAL_PORT
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select I8259
 	select ISA
+	select SYS_HAS_CPU_R5432
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This enables support for the R5432-based NEC DDB Vrc-5476
 	  evaluation board.
@@ -501,12 +488,15 @@ config DDB5476
 
 config DDB5477
 	bool "Support for NEC DDB Vrc-5477"
+	select DDB5XXX_COMMON
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select I8259
 	select IRQ_CPU
+	select SYS_HAS_CPU_R5432
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This enables support for the R5432-based NEC DDB Vrc-5477,
 	  or Rockhopper/SolutionGear boards with R5432/R5500 CPUs.
@@ -514,10 +504,28 @@ config DDB5477
 	  Features : kernel debugging, serial terminal, NFS root fs, on-board
 	  ether port USB, AC97, PCI, etc.
 
-config DDB5477_BUS_FREQUENCY
-	int "bus frequency (in kHZ, 0 for auto-detect)"
-	depends on DDB5477
-	default 0
+config MACH_VR41XX
+	bool "Support for NEC VR4100 series based machines"
+	select SYS_HAS_CPU_VR41XX
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+
+config PMC_YOSEMITE
+	bool "Support for PMC-Sierra Yosemite eval board"
+	select DMA_COHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select IRQ_CPU_RM7K
+	select IRQ_CPU_RM9K
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_RM9000
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	help
+	  Yosemite is an evaluation board for the RM9000x2 processor
+	  manufactured by PMC-Sierra.
 
 config QEMU
 	bool "Support for Qemu"
@@ -527,15 +535,16 @@ config QEMU
 	select I8259
 	select ISA
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	help
-	 Qemu is a software emulator which among other architectures also
-	 can simulate a MIPS32 4Kc system.  This patch adds support for the
-	 system architecture that currently is being simulated by Qemu.  It
-	 will eventually be removed again when Qemu has the capability to
-	 simulate actual MIPS hardware platforms.  More information on Qemu
-	 can be found at http://www.linux-mips.org/wiki/Qemu.
+	  Qemu is a software emulator which among other architectures also
+	  can simulate a MIPS32 4Kc system.  This patch adds support for the
+	  system architecture that currently is being simulated by Qemu.  It
+	  will eventually be removed again when Qemu has the capability to
+	  simulate actual MIPS hardware platforms.  More information on Qemu
+	  can be found at http://www.linux-mips.org/wiki/Qemu.
 
 config SGI_IP22
 	bool "Support for SGI IP22 (Indy/Indigo2)"
@@ -543,11 +552,15 @@ config SGI_IP22
 	select ARC32
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
+	select HW_HAS_EISA
 	select IP22_CPU_SCACHE
 	select IRQ_CPU
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_R4X00
+	select SYS_HAS_CPU_R5000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
 	  This are the SGI Indy, Challenge S and Indigo2, as well as certain
 	  OEM variants like the Tandem CMN B006S. To compile a Linux kernel
@@ -557,70 +570,18 @@ config SGI_IP27
 	bool "Support for SGI IP27 (Origin200/2000)"
 	select ARC
 	select ARC64
+	select BOOT_ELF64
 	select DMA_IP27
 	select HW_HAS_PCI
 	select PCI_DOMAINS
+	select SYS_HAS_CPU_R10000
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
 	  This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
 	  workstations.  To compile a Linux kernel that runs on these, say Y
 	  here.
 
-#config SGI_SN0_XXL
-#	bool "IP27 XXL"
-#	depends on SGI_IP27
-#	  This options adds support for userspace processes upto 16TB size.
-#	  Normally the limit is just .5TB.
-
-config SGI_SN0_N_MODE
-	bool "IP27 N-Mode"
-	depends on SGI_IP27
-	help
-	  The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
-	  configured in either N-Modes which allows for more nodes or M-Mode
-	  which allows for more memory.  Your system is most probably
-	  running in M-Mode, so you should say N here.
-
-config ARCH_DISCONTIGMEM_ENABLE
-	bool
-	default y if SGI_IP27
-	help
-	  Say Y to upport efficient handling of discontiguous physical memory,
-	  for architectures which are either NUMA (Non-Uniform Memory Access)
-	  or have huge holes in the physical address space for other reasons.
-	  See <file:Documentation/vm/numa> for more.
-
-config NUMA
-	bool "NUMA Support"
-	depends on SGI_IP27
-	help
-	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
-	  Access).  This option is for configuring high-end multiprocessor
-	  server machines.  If in doubt, say N.
-
-config MAPPED_KERNEL
-	bool "Mapped kernel support"
-	depends on SGI_IP27
-	help
-	  Change the way a Linux kernel is loaded into memory on a MIPS64
-	  machine.  This is required in order to support text replication and
-	  NUMA.  If you need to understand it, read the source code.
-
-config REPLICATE_KTEXT
-	bool "Kernel text replication support"
-	depends on SGI_IP27
-	help
-	  Say Y here to enable replicating the kernel text across multiple
-	  nodes in a NUMA cluster.  This trades memory for speed.
-
-config REPLICATE_EXHANDLERS
-	bool "Exception handler replication support"
-	depends on SGI_IP27
-	help
-	  Say Y here to enable replicating the kernel exception handlers
-	  across multiple nodes in a NUMA cluster. This trades memory for
-	  speed.
-
 config SGI_IP32
 	bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
@@ -633,353 +594,152 @@ config SGI_IP32
 	select HW_HAS_PCI
 	select R5000_CPU_SCACHE
 	select RM7000_CPU_SCACHE
+	select SYS_HAS_CPU_R5000
+	select SYS_HAS_CPU_R10000 if BROKEN
+	select SYS_HAS_CPU_RM7000
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
 	help
 	  If you want this kernel to run on SGI O2 workstation, say Y here.
 
-config SOC_AU1X00
-	bool "Support for AMD/Alchemy Au1X00 SOCs"
-	select SYS_SUPPORTS_32BIT_KERNEL
-
-choice
-	prompt "Au1X00 SOC Type"
-	depends on SOC_AU1X00
-	help
-	  Say Y here to enable support for one of three AMD/Alchemy
-	  SOCs. For additional documentation see www.amd.com.
-
-config SOC_AU1000
-	bool "SOC_AU1000"
-config SOC_AU1100
-	bool "SOC_AU1100"
-config SOC_AU1500
-	bool "SOC_AU1500"
-config SOC_AU1550
-	bool "SOC_AU1550"
-
-endchoice
-
-choice
-	prompt "AMD/Alchemy Au1x00 board support"
-	depends on SOC_AU1X00
-	help
-	  These are evaluation boards built by AMD/Alchemy to
-	  showcase their Au1X00 Internet Edge Processors. The SOC design
-	  is based on the MIPS32 architecture running at 266/400/500MHz
-	  with many integrated peripherals. Further information can be
-	  found at their website, <http://www.amd.com/>. Say Y here if you
-	  wish to build a kernel for this platform.
-
-config MIPS_PB1000
-	bool "PB1000 board"
-	depends on SOC_AU1000
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select SWAP_IO_SPACE
-
-config MIPS_PB1100
-	bool "PB1100 board"
-	depends on SOC_AU1100
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select SWAP_IO_SPACE
-
-config MIPS_PB1500
-	bool "PB1500 board"
-	depends on SOC_AU1500
-	select DMA_COHERENT
-	select HW_HAS_PCI
-
-config MIPS_PB1550
-	bool "PB1550 board"
-	depends on SOC_AU1550
-	select DMA_COHERENT
-	select HW_HAS_PCI
-	select MIPS_DISABLE_OBSOLETE_IDE
-
-config MIPS_DB1000
-	bool "DB1000 board"
-	depends on SOC_AU1000
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-
-config MIPS_DB1100
-	bool "DB1100 board"
-	depends on SOC_AU1100
-	select DMA_NONCOHERENT
-
-config MIPS_DB1500
-	bool "DB1500 board"
-	depends on SOC_AU1500
-	select DMA_COHERENT
-	select HW_HAS_PCI
-	select MIPS_DISABLE_OBSOLETE_IDE
-
-config MIPS_DB1550
-	bool "DB1550 board"
-	depends on SOC_AU1550
-	select HW_HAS_PCI
-	select DMA_COHERENT
-	select MIPS_DISABLE_OBSOLETE_IDE
-
-config MIPS_BOSPORUS
-	bool "Bosporus board"
-	depends on SOC_AU1500
-	select DMA_NONCOHERENT
-
-config MIPS_MIRAGE
-	bool "Mirage board"
-	depends on SOC_AU1500
-	select DMA_NONCOHERENT
-
-config MIPS_XXS1500
-	bool "MyCable XXS1500 board"
-	depends on SOC_AU1500
-	select DMA_NONCOHERENT
-
-config MIPS_MTX1
-	bool "4G Systems MTX-1 board"
-	depends on SOC_AU1500
-	select HW_HAS_PCI
-	select DMA_NONCOHERENT
-
-endchoice
-
-config SIBYTE_SB1xxx_SOC
-	bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+config SIBYTE_BIGSUR
+	bool "Support for Sibyte BigSur"
 	select BOOT_ELF32
 	select DMA_COHERENT
+	select PCI_DOMAINS
+	select SIBYTE_BCM1x80
 	select SWAP_IO_SPACE
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-
-choice
-	prompt "BCM1xxx SOC-based board"
-	depends on SIBYTE_SB1xxx_SOC
-	default SIBYTE_SWARM
-	help
-	  Enable support for boards based on the SiByte line of SOCs
-	  from Broadcom.  There are configurations for the known
-	  evaluation boards, or you can choose "Other" and add your
-	  own board support code.
+	select SYS_HAS_CPU_SB1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_SWARM
-	bool "BCM91250A-SWARM"
+	bool "Support for Sibyte BCM91250A-SWARM"
+	select BOOT_ELF32
+	select DMA_COHERENT
 	select SIBYTE_SB1250
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_SB1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_SENTOSA
-	bool "BCM91250E-Sentosa"
+	bool "Support for Sibyte BCM91250E-Sentosa"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select DMA_COHERENT
 	select SIBYTE_SB1250
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_SB1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_RHONE
-	bool "BCM91125E-Rhone"
+	bool "Support for Sibyte BCM91125E-Rhone"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select DMA_COHERENT
 	select SIBYTE_BCM1125H
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_SB1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_CARMEL
-	bool "BCM91120x-Carmel"
+	bool "Support for Sibyte BCM91120x-Carmel"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select DMA_COHERENT
 	select SIBYTE_BCM1120
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_SB1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_PTSWARM
-	bool "BCM91250PT-PTSWARM"
+	bool "Support for Sibyte BCM91250PT-PTSWARM"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select DMA_COHERENT
 	select SIBYTE_SB1250
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_SB1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_LITTLESUR
-	bool "BCM91250C2-LittleSur"
+	bool "Support for Sibyte BCM91250C2-LittleSur"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select DMA_COHERENT
 	select SIBYTE_SB1250
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_SB1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_CRHINE
-	bool "BCM91120C-CRhine"
+	bool "Support for Sibyte BCM91120C-CRhine"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select DMA_COHERENT
 	select SIBYTE_BCM1120
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_SB1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_CRHONE
-	bool "BCM91125C-CRhone"
-	select SIBYTE_BCM1125
-
-config SIBYTE_UNKNOWN
-	bool "Other"
-
-endchoice
-
-config SIBYTE_BOARD
-	bool
-	depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN
-	default y
-
-choice
-	prompt "BCM1xxx SOC Type"
-	depends on SIBYTE_UNKNOWN
-	default SIBYTE_UNK_BCM1250
-	help
-	  Since you haven't chosen a known evaluation board from
-	  Broadcom, you must explicitly pick the SOC this kernel is
-	  targetted for.
-
-config SIBYTE_UNK_BCM1250
-	bool "BCM1250"
-	select SIBYTE_SB1250
-
-config SIBYTE_UNK_BCM1120
-	bool "BCM1120"
-	select SIBYTE_BCM1120
-
-config SIBYTE_UNK_BCM1125
-	bool "BCM1125"
+	bool "Support for Sibyte BCM91125C-CRhone"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select DMA_COHERENT
 	select SIBYTE_BCM1125
-
-config SIBYTE_UNK_BCM1125H
-	bool "BCM1125H"
-	select SIBYTE_BCM1125H
-
-endchoice
-
-config SIBYTE_SB1250
-	bool
-	select HW_HAS_PCI
-
-config SIBYTE_BCM1120
-	bool
-	select SIBYTE_BCM112X
-
-config SIBYTE_BCM1125
-	bool
-	select HW_HAS_PCI
-	select SIBYTE_BCM112X
-
-config SIBYTE_BCM1125H
-	bool
-	select HW_HAS_PCI
-	select SIBYTE_BCM112X
-
-config SIBYTE_BCM112X
-	bool
-
-choice
-	prompt "SiByte SOC Stepping"
-	depends on SIBYTE_SB1xxx_SOC
-
-config CPU_SB1_PASS_1
-	bool "1250 Pass1"
-	depends on SIBYTE_SB1250
-	select CPU_HAS_PREFETCH
-
-config CPU_SB1_PASS_2_1250
-	bool "1250 An"
-	depends on SIBYTE_SB1250
-	select CPU_SB1_PASS_2
-	help
-	  Also called BCM1250 Pass 2
-
-config CPU_SB1_PASS_2_2
-	bool "1250 Bn"
-	depends on SIBYTE_SB1250
-	select CPU_HAS_PREFETCH
-	help
-	  Also called BCM1250 Pass 2.2
-
-config CPU_SB1_PASS_4
-	bool "1250 Cn"
-	depends on SIBYTE_SB1250
-	select CPU_HAS_PREFETCH
-	help
-	  Also called BCM1250 Pass 3
-
-config CPU_SB1_PASS_2_112x
-	bool "112x Hybrid"
-	depends on SIBYTE_BCM112X
-	select CPU_SB1_PASS_2
-
-config CPU_SB1_PASS_3
-	bool "112x An"
-	depends on SIBYTE_BCM112X
-	select CPU_HAS_PREFETCH
-
-endchoice
-
-config CPU_SB1_PASS_2
-	bool
-
-config SIBYTE_HAS_LDT
-	bool
-	depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
-	default y
-
-config SIMULATION
-	bool "Running under simulation"
-	depends on SIBYTE_SB1xxx_SOC
-	help
-	  Build a kernel suitable for running under the GDB simulator.
-	  Primarily adjusts the kernel's notion of time.
-
-config SIBYTE_CFE
-	bool "Booting from CFE"
-	depends on SIBYTE_SB1xxx_SOC
-	help
-	  Make use of the CFE API for enumerating available memory,
-	  controlling secondary CPUs, and possibly console output.
-
-config SIBYTE_CFE_CONSOLE
-	bool "Use firmware console"
-	depends on SIBYTE_CFE
-	help
-	  Use the CFE API's console write routines during boot.  Other console
-	  options (VT console, sb1250 duart console, etc.) should not be
-	  configured.
-
-config SIBYTE_STANDALONE
-	bool
-	depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
-	default y
-
-config SIBYTE_STANDALONE_RAM_SIZE
-	int "Memory size (in megabytes)"
-	depends on SIBYTE_STANDALONE
-	default "32"
-
-config SIBYTE_BUS_WATCHER
-	bool "Support for Bus Watcher statistics"
-	depends on SIBYTE_SB1xxx_SOC
-	help
-	  Handle and keep statistics on the bus error interrupts (COR_ECC,
-	  BAD_ECC, IO_BUS).
-
-config SIBYTE_BW_TRACE
-	bool "Capture bus trace before bus error"
-	depends on SIBYTE_BUS_WATCHER
-	help
-	  Run a continuous bus trace, dumping the raw data as soon as
-	  a ZBbus error is detected.  Cannot work if ZBbus profiling
-	  is turned on, and also will interfere with JTAG-based trace
-	  buffer activity.  Raw buffer data is dumped to console, and
-	  must be processed off-line.
-
-config SIBYTE_SB1250_PROF
-	bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
-	depends on SIBYTE_SB1xxx_SOC
-
-config SIBYTE_TBPROF
-	bool "Support for ZBbus profiling"
-	depends on SIBYTE_SB1xxx_SOC
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_SB1
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SNI_RM200_PCI
 	bool "Support for SNI RM200 PCI"
 	select ARC
 	select ARC32
+	select ARCH_MAY_HAVE_PC_FDC
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
 	select HAVE_STD_PC_SERIAL_PORT
+	select HW_HAS_EISA
 	select HW_HAS_PCI
 	select I8259
 	select ISA
+	select SYS_HAS_CPU_R4X00
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
 	  Nixdorf Informationssysteme (SNI), parent company of Pyramid
 	  Technology and now in turn merged with Fujitsu.  Say Y here to
 	  support this machine type.
 
+config TOSHIBA_JMR3927
+	bool "Support for Toshiba JMR-TX3927 board"
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select MIPS_TX3927
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_TX39XX
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select TOSHIBA_BOARDS
+
 config TOSHIBA_RBTX4927
 	bool "Support for Toshiba TBTX49[23]7 board"
 	select DMA_NONCOHERENT
@@ -988,15 +748,51 @@ config TOSHIBA_RBTX4927
 	select I8259
 	select ISA
 	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_TX49XX
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select TOSHIBA_BOARDS
 	help
 	  This Toshiba board is based on the TX4927 processor. Say Y here to
 	  support this machine type
 
-config TOSHIBA_FPCIB0
-	bool "FPCIB0 Backplane Support"
-	depends on TOSHIBA_RBTX4927
+config TOSHIBA_RBTX4938
+	bool "Support for Toshiba RBTX4938 board"
+	select HAVE_STD_PC_SERIAL_PORT
+	select DMA_NONCOHERENT
+	select GENERIC_ISA_DMA
+	select HAS_TXX9_SERIAL
+	select HW_HAS_PCI
+	select I8259
+	select ISA
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_TX49XX
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select TOSHIBA_BOARDS
+	help
+	  This Toshiba board is based on the TX4938 processor. Say Y here to
+	  support this machine type
+
+endchoice
+
+source "arch/mips/ddb5xxx/Kconfig"
+source "arch/mips/gt64120/ev64120/Kconfig"
+source "arch/mips/jazz/Kconfig"
+source "arch/mips/ite-boards/Kconfig"
+source "arch/mips/lasat/Kconfig"
+source "arch/mips/momentum/Kconfig"
+source "arch/mips/pmc-sierra/Kconfig"
+source "arch/mips/sgi-ip27/Kconfig"
+source "arch/mips/sibyte/Kconfig"
+source "arch/mips/tx4927/Kconfig"
+source "arch/mips/tx4938/Kconfig"
+source "arch/mips/vr41xx/Kconfig"
+source "arch/mips/philips/pnx8550/common/Kconfig"
+
+endmenu
 
 config RWSEM_GENERIC_SPINLOCK
 	bool
@@ -1014,8 +810,9 @@ config GENERIC_CALIBRATE_DELAY
 #
 config ARC
 	bool
-	depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61
-	default y
+
+config ARCH_MAY_HAVE_PC_FDC
+	bool
 
 config DMA_COHERENT
 	bool
@@ -1034,51 +831,65 @@ config DMA_NONCOHERENT
 config DMA_NEED_PCI_MAP_STATE
 	bool
 
+config OWN_DMA
+	bool
+
 config EARLY_PRINTK
 	bool
-	depends on MACH_DECSTATION
-	default y
 
 config GENERIC_ISA_DMA
 	bool
-	depends on SNI_RM200_PCI || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 || MIPS_MALTA
-	default y
 
 config I8259
 	bool
-	depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT
-	default y
 
 config LIMITED_DMA
 	bool
 	select HIGHMEM
+	select SYS_SUPPORTS_HIGHMEM
 
 config MIPS_BONITO64
 	bool
-	depends on MIPS_ATLAS || MIPS_MALTA
-	default y
 
 config MIPS_MSC
 	bool
-	depends on MIPS_ATLAS || MIPS_MALTA
-	default y
 
 config MIPS_NILE4
 	bool
-	depends on LASAT
-	default y
 
 config MIPS_DISABLE_OBSOLETE_IDE
 	bool
 
-config CPU_LITTLE_ENDIAN
-	bool "Generate little endian code"
-	default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
-	default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
+#
+# Endianess selection.  Suffiently obscure so many users don't know what to
+# answer,so we try hard to limit the available choices.  Also the use of a
+# choice statement should be more obvious to the user.
+#
+choice
+	prompt "Endianess selection"
 	help
 	  Some MIPS machines can be configured for either little or big endian
-	  byte order. These modes require different kernels. Say Y if your
-	  machine is little endian, N if it's a big endian machine.
+	  byte order. These modes require different kernels and a different
+	  Linux distribution.  In general there is one prefered byteorder for a
+	  particular system but some systems are just as commonly used in the
+	  one or the other endianess.
+
+config CPU_BIG_ENDIAN
+	bool "Big endian"
+	depends on SYS_SUPPORTS_BIG_ENDIAN
+
+config CPU_LITTLE_ENDIAN
+	bool "Little endian"
+	depends on SYS_SUPPORTS_LITTLE_ENDIAN
+	help
+
+endchoice
+
+config SYS_SUPPORTS_BIG_ENDIAN
+	bool
+
+config SYS_SUPPORTS_LITTLE_ENDIAN
+	bool
 
 config IRQ_CPU
 	bool
@@ -1086,42 +897,69 @@ config IRQ_CPU
 config IRQ_CPU_RM7K
 	bool
 
+config IRQ_CPU_RM9K
+	bool
+
 config IRQ_MV64340
 	bool
 
 config DDB5XXX_COMMON
 	bool
-	depends on DDB5074 || DDB5476 || DDB5477
-	default y
 
 config MIPS_BOARDS_GEN
 	bool
-	depends on MIPS_ATLAS || MIPS_MALTA || MIPS_SEAD
-	default y
 
 config MIPS_GT64111
 	bool
-	depends on MIPS_COBALT
-	default y
 
 config MIPS_GT64120
 	bool
-	depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT
-	default y
 
 config MIPS_TX3927
 	bool
-	depends on TOSHIBA_JMR3927
 	select HAS_TXX9_SERIAL
-	default y
 
 config PCI_MARVELL
 	bool
 
 config ITE_BOARD_GEN
 	bool
-	depends on MIPS_IVR || MIPS_ITE8172
-	default y
+
+config SOC_AU1000
+	bool
+	select SOC_AU1X00
+
+config SOC_AU1100
+	bool
+	select SOC_AU1X00
+
+config SOC_AU1500
+	bool
+	select SOC_AU1X00
+
+config SOC_AU1550
+	bool
+	select SOC_AU1X00
+
+config SOC_AU1200
+	bool
+	select SOC_AU1X00
+
+config SOC_AU1X00
+	bool
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_32BIT_KERNEL
+
+config PNX8550
+	bool
+	select SOC_PNX8550
+
+config SOC_PNX8550
+	bool
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select SYS_HAS_CPU_R4X00
+	select SYS_SUPPORTS_32BIT_KERNEL
 
 config SWAP_IO_SPACE
 	bool
@@ -1148,6 +986,9 @@ config SYSCLK_100
 
 endchoice
 
+config ARC32
+	bool
+
 config AU1X00_USB_DEVICE
 	bool
 	depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
@@ -1155,11 +996,7 @@ config AU1X00_USB_DEVICE
 
 config MIPS_GT96100
 	bool
-	depends on MIPS_EV96100
-	default y
-	help
-	  Say Y here to support the Galileo Technology GT96100 communications
-	  controller card.  There is a web page at <http://www.galileot.com/>.
+	select MIPS_GT64120
 
 config IT8172_CIR
 	bool
@@ -1173,8 +1010,6 @@ config IT8712
 
 config BOOT_ELF32
 	bool
-	depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_3 || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI
-	default y
 
 config MIPS_L1_CACHE_SHIFT
 	int
@@ -1182,11 +1017,6 @@ config MIPS_L1_CACHE_SHIFT
 	default "7" if SGI_IP27
 	default "5"
 
-config ARC32
-	bool
-	depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
-	default y
-
 config HAVE_STD_PC_SERIAL_PORT
 	bool
 
@@ -1206,30 +1036,12 @@ config ARC_PROMLIB
 
 config ARC64
 	bool
-	depends on SGI_IP27
-	default y
 
 config BOOT_ELF64
 	bool
-	depends on SGI_IP27
-	default y
-
-#config MAPPED_PCI_IO y
-#	bool
-#	depends on SGI_IP27
-#	default y
-
-config QL_ISP_A64
-	bool
-	depends on SGI_IP27
-	default y
 
 config TOSHIBA_BOARDS
 	bool
-	depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
-	default y
-
-endmenu
 
 menu "CPU selection"
 
@@ -1237,18 +1049,69 @@ choice
 	prompt "CPU type"
 	default CPU_R4X00
 
-config CPU_MIPS32
-	bool "MIPS32"
+config CPU_MIPS32_R1
+	bool "MIPS32 Release 1"
+	depends on SYS_HAS_CPU_MIPS32_R1
+	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
+	help
+	  Choose this option to build a kernel for release 1 or later of the
+	  MIPS32 architecture.  Most modern embedded systems with a 32-bit
+	  MIPS processor are based on a MIPS32 processor.  If you know the
+	  specific type of processor in your system, choose those that one
+	  otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
+	  Release 2 of the MIPS32 architecture is available since several
+	  years so chances are you even have a MIPS32 Release 2 processor
+	  in which case you should choose CPU_MIPS32_R2 instead for better
+	  performance.
+
+config CPU_MIPS32_R2
+	bool "MIPS32 Release 2"
+	depends on SYS_HAS_CPU_MIPS32_R2
+	select CPU_HAS_PREFETCH
+	select CPU_SUPPORTS_32BIT_KERNEL
+	help
+	  Choose this option to build a kernel for release 2 or later of the
+	  MIPS32 architecture.  Most modern embedded systems with a 32-bit
+	  MIPS processor are based on a MIPS32 processor.  If you know the
+	  specific type of processor in your system, choose those that one
+	  otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
 
-config CPU_MIPS64
-	bool "MIPS64"
+config CPU_MIPS64_R1
+	bool "MIPS64 Release 1"
+	depends on SYS_HAS_CPU_MIPS64_R1
+	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
+	help
+	  Choose this option to build a kernel for release 1 or later of the
+	  MIPS64 architecture.  Many modern embedded systems with a 64-bit
+	  MIPS processor are based on a MIPS64 processor.  If you know the
+	  specific type of processor in your system, choose those that one
+	  otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
+	  Release 2 of the MIPS64 architecture is available since several
+	  years so chances are you even have a MIPS64 Release 2 processor
+	  in which case you should choose CPU_MIPS64_R2 instead for better
+	  performance.
+
+config CPU_MIPS64_R2
+	bool "MIPS64 Release 2"
+	depends on SYS_HAS_CPU_MIPS64_R2
+	select CPU_HAS_PREFETCH
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	help
+	  Choose this option to build a kernel for release 2 or later of the
+	  MIPS64 architecture.  Many modern embedded systems with a 64-bit
+	  MIPS processor are based on a MIPS64 processor.  If you know the
+	  specific type of processor in your system, choose those that one
+	  otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
 
 config CPU_R3000
 	bool "R3000"
+	depends on SYS_HAS_CPU_R3000
 	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
 	help
 	  Please make sure to pick the right CPU type. Linux/MIPS is not
 	  designed to be generic, i.e. Kernels compiled for R3000 CPUs will
@@ -1259,20 +1122,23 @@ config CPU_R3000
 
 config CPU_TX39XX
 	bool "R39XX"
+	depends on SYS_HAS_CPU_TX39XX
 	select CPU_SUPPORTS_32BIT_KERNEL
 
 config CPU_VR41XX
 	bool "R41xx"
+	depends on SYS_HAS_CPU_VR41XX
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
-	  The options selects support for the NEC VR41xx series of processors.
+	  The options selects support for the NEC VR4100 series of processors.
 	  Only choose this option if you have one of these processors as a
 	  kernel built with this option will not run on any other type of
 	  processor or vice versa.
 
 config CPU_R4300
 	bool "R4300"
+	depends on SYS_HAS_CPU_R4300
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1280,6 +1146,7 @@ config CPU_R4300
 
 config CPU_R4X00
 	bool "R4x00"
+	depends on SYS_HAS_CPU_R4X00
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1288,11 +1155,13 @@ config CPU_R4X00
 
 config CPU_TX49XX
 	bool "R49XX"
+	depends on SYS_HAS_CPU_TX49XX
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 
 config CPU_R5000
 	bool "R5000"
+	depends on SYS_HAS_CPU_R5000
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1300,10 +1169,14 @@ config CPU_R5000
 
 config CPU_R5432
 	bool "R5432"
+	depends on SYS_HAS_CPU_R5432
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
 
 config CPU_R6000
 	bool "R6000"
 	depends on EXPERIMENTAL
+	depends on SYS_HAS_CPU_R6000
 	select CPU_SUPPORTS_32BIT_KERNEL
 	help
 	  MIPS Technologies R6000 and R6000A series processors.  Note these
@@ -1311,6 +1184,7 @@ config CPU_R6000
 
 config CPU_NEVADA
 	bool "RM52xx"
+	depends on SYS_HAS_CPU_NEVADA
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1319,6 +1193,8 @@ config CPU_NEVADA
 config CPU_R8000
 	bool "R8000"
 	depends on EXPERIMENTAL
+	depends on SYS_HAS_CPU_R8000
+	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
 	  MIPS Technologies R8000 processors.  Note these processors are
@@ -1326,25 +1202,151 @@ config CPU_R8000
 
 config CPU_R10000
 	bool "R10000"
+	depends on SYS_HAS_CPU_R10000
+	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
 	help
 	  MIPS Technologies R10000-series processors.
 
 config CPU_RM7000
 	bool "RM7000"
+	depends on SYS_HAS_CPU_RM7000
+	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
 
 config CPU_RM9000
 	bool "RM9000"
+	depends on SYS_HAS_CPU_RM9000
+	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
 
 config CPU_SB1
 	bool "SB1"
+	depends on SYS_HAS_CPU_SB1
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+
+endchoice
+
+config SYS_HAS_CPU_MIPS32_R1
+	bool
+
+config SYS_HAS_CPU_MIPS32_R2
+	bool
+
+config SYS_HAS_CPU_MIPS64_R1
+	bool
+
+config SYS_HAS_CPU_MIPS64_R2
+	bool
+
+config SYS_HAS_CPU_R3000
+	bool
+
+config SYS_HAS_CPU_TX39XX
+	bool
+
+config SYS_HAS_CPU_VR41XX
+	bool
+
+config SYS_HAS_CPU_R4300
+	bool
+
+config SYS_HAS_CPU_R4X00
+	bool
+
+config SYS_HAS_CPU_TX49XX
+	bool
+
+config SYS_HAS_CPU_R5000
+	bool
+
+config SYS_HAS_CPU_R5432
+	bool
+
+config SYS_HAS_CPU_R6000
+	bool
+
+config SYS_HAS_CPU_NEVADA
+	bool
+
+config SYS_HAS_CPU_R8000
+	bool
+
+config SYS_HAS_CPU_R10000
+	bool
+
+config SYS_HAS_CPU_RM7000
+	bool
+
+config SYS_HAS_CPU_RM9000
+	bool
+
+config SYS_HAS_CPU_SB1
+	bool
+
+endmenu
+
+#
+# These two indicate any levelof the MIPS32 and MIPS64 architecture
+#
+config CPU_MIPS32
+	bool
+	default y if CPU_MIPS32_R1 || CPU_MIPS32_R2
+
+config CPU_MIPS64
+	bool
+	default y if CPU_MIPS64_R1 || CPU_MIPS64_R2
+
+#
+# These two indicate the revision of the architecture, either 32 bot 64 bit.
+#
+config CPU_MIPSR1
+	bool
+	default y if CPU_MIPS32_R1 || CPU_MIPS64_R1
+
+config CPU_MIPSR2
+	bool
+	default y if CPU_MIPS32_R2 || CPU_MIPS64_R2
+
+config SYS_SUPPORTS_32BIT_KERNEL
+	bool
+config SYS_SUPPORTS_64BIT_KERNEL
+	bool
+config CPU_SUPPORTS_32BIT_KERNEL
+	bool
+config CPU_SUPPORTS_64BIT_KERNEL
+	bool
+
+menu "Kernel type"
+
+choice
+
+	prompt "Kernel code model"
+	help
+	  You should only select this option if you have a workload that
+	  actually benefits from 64-bit processing or if your machine has
+	  large memory.  You will only be presented a single option in this
+	  menu if your system does not support both 32-bit and 64-bit kernels.
+
+config 32BIT
+	bool "32-bit kernel"
+	depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL
+	select TRAD_SIGNALS
+	help
+	  Select this option if you want to build a 32-bit kernel.
+config 64BIT
+	bool "64-bit kernel"
+	depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
+	help
+	  Select this option if you want to build a 64-bit kernel.
 
 endchoice
 
@@ -1416,12 +1418,43 @@ config SIBYTE_DMA_PAGEOPS
 	  SiByte Linux port.  Seems to give a small performance benefit.
 
 config CPU_HAS_PREFETCH
-	bool "Enable prefetches" if CPU_SB1 && !CPU_SB1_PASS_2
-	default y if CPU_MIPS32 || CPU_MIPS64 || CPU_RM7000 || CPU_RM9000 || CPU_R10000
+	bool
+
+config MIPS_MT
+	bool "Enable MIPS MT"
+
+choice
+	prompt "MIPS MT options"
+	depends on MIPS_MT
 
-config VTAG_ICACHE
-	bool "Support for Virtual Tagged I-cache" if CPU_MIPS64 || CPU_MIPS32
-	default y if CPU_SB1
+config MIPS_MT_SMP
+	bool "Use 1 TC on each available VPE for SMP"
+	select SMP
+
+config MIPS_VPE_LOADER
+	bool "VPE loader support."
+	depends on MIPS_MT
+	help
+	  Includes a loader for loading an elf relocatable object
+	  onto another VPE and running it.
+
+endchoice
+
+config MIPS_VPE_LOADER_TOM
+	bool "Load VPE program into memory hidden from linux"
+	depends on MIPS_VPE_LOADER
+	default y
+	help
+	  The loader can use memory that is present but has been hidden from
+	  Linux using the kernel command line option "mem=xxMB". It's up to
+	  you to ensure the amount you put in the option and the space your
+	  program requires is less or equal to the amount physically present.
+
+# this should possibly be in drivers/char, but it is rather cpu related. Hmmm
+config MIPS_VPE_APSP_API
+	bool "Enable support for AP/SP API (RTLX)"
+	depends on MIPS_VPE_LOADER
+	help
 
 config SB1_PASS_1_WORKAROUNDS
 	bool
@@ -1440,7 +1473,7 @@ config SB1_PASS_2_1_WORKAROUNDS
 
 config 64BIT_PHYS_ADDR
 	bool "Support for 64-bit physical address space"
-	depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && 32BIT
+	depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32_R1 || CPU_MIPS64_R1) && 32BIT
 
 config CPU_ADVANCED
 	bool "Override CPU Options"
@@ -1463,7 +1496,7 @@ config CPU_HAS_LLSC
 
 config CPU_HAS_LLDSCD
 	bool "lld/scd Instructions available" if CPU_ADVANCED
-	default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32
+	default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32_R1
 	help
 	  Say Y here if your CPU has the lld and scd instructions, the 64-bit
 	  equivalents of ll and sc.  Say Y here for better performance, N if
@@ -1477,12 +1510,52 @@ config CPU_HAS_WB
 	  machines which require flushing of write buffers in software.  Saying
 	  Y is the safe option; N may result in kernel malfunction and crashes.
 
+menu "MIPSR2 Interrupt handling"
+	depends on CPU_MIPSR2 && CPU_ADVANCED
+
+config CPU_MIPSR2_IRQ_VI
+	bool "Vectored interrupt mode"
+	help
+	   Vectored interrupt mode allowing faster dispatching of interrupts.
+	   The board support code needs to be written to take advantage of this
+	   mode.  Compatibility code is included to allow the kernel to run on
+	   a CPU that does not support vectored interrupts.  It's safe to
+	   say Y here.
+
+config CPU_MIPSR2_IRQ_EI
+	bool "External interrupt controller mode"
+	help
+	   Extended interrupt mode takes advantage of an external interrupt
+	   controller to allow fast dispatching from many possible interrupt
+	   sources. Say N unless you know that external interrupt support is
+	   required.
+
+config CPU_MIPSR2_SRS
+	bool "Make shadow set registers available for interrupt handlers"
+	depends on CPU_MIPSR2_IRQ_VI || CPU_MIPSR2_IRQ_EI
+	help
+	   Allow the kernel to use shadow register sets for fast interrupts.
+	   Interrupt handlers must be specially written to use shadow sets.
+	   Say N unless you know that shadow register set upport is needed.
+endmenu
+
 config CPU_HAS_SYNC
 	bool
 	depends on !CPU_R3000
 	default y
 
 #
+# Use the generic interrupt handling code in kernel/irq/:
+#
+config GENERIC_HARDIRQS
+	bool
+	default y
+
+config GENERIC_IRQ_PROBE
+	bool
+	default y
+
+#
 # - Highmem only makes sense for the 32-bit kernel.
 # - The current highmem code will only work properly on physically indexed
 #   caches such as R3000, SB1, R7000 or those that look like they're virtually
@@ -1491,14 +1564,19 @@ config CPU_HAS_SYNC
 #   where it's known to be safe.  This will not offer highmem on a few systems
 #   such as MIPS32 and MIPS64 CPUs which may have virtual and physically
 #   indexed CPUs but we're playing safe.
-# - We should not offer highmem for system of which we already know that they
-#   don't have memory configurations that could gain from highmem support in
-#   the kernel because they don't support configurations with RAM at physical
-#   addresses > 0x20000000.
+# - We use SYS_SUPPORTS_HIGHMEM to offer highmem only for systems where we
+#   know they might have memory configurations that could make use of highmem
+#   support.
 #
 config HIGHMEM
 	bool "High Memory Support"
-	depends on 32BIT && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX)
+	depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM
+
+config CPU_SUPPORTS_HIGHMEM
+	bool
+
+config SYS_SUPPORTS_HIGHMEM
+	bool
 
 config ARCH_FLATMEM_ENABLE
 	def_bool y
@@ -1508,7 +1586,7 @@ source "mm/Kconfig"
 
 config SMP
 	bool "Multi-Processing support"
-	depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27
+	depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1543,14 +1621,7 @@ config NR_CPUS
 	  This is purely to save memory - each supported CPU adds
 	  approximately eight kilobytes to the kernel image.
 
-config PREEMPT
-	bool "Preemptible Kernel"
-	help
-	  This option reduces the latency of the kernel when reacting to
-	  real-time or interactive events by allowing a low priority process to
-	  be preempted even if it is in kernel mode executing a system call.
-	  This allows applications to run more reliably even when the system is
-	  under load.
+source "kernel/Kconfig.preempt"
 
 config RTC_DS1742
 	bool "DS1742 BRAM/RTC support"
@@ -1566,14 +1637,16 @@ config MIPS_INSANE_LARGE
 	  This will result in additional memory usage, so it is not
 	  recommended for normal users.
 
+endmenu
+
 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y
 
-endmenu
-
 menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
 
+config HW_HAS_EISA
+	bool
 config HW_HAS_PCI
 	bool
 
@@ -1607,7 +1680,7 @@ config ISA
 
 config EISA
 	bool "EISA support"
-	depends on SGI_IP22 || SNI_RM200_PCI
+	depends on HW_HAS_EISA
 	select ISA
 	---help---
 	  The Extended Industry Standard Architecture (EISA) bus was
@@ -1641,12 +1714,6 @@ config MMU
 	bool
 	default y
 
-config MCA
-	bool
-
-config SBUS
-	bool
-
 source "drivers/pcmcia/Kconfig"
 
 source "drivers/pci/hotplug/Kconfig"
@@ -1659,7 +1726,6 @@ source "fs/Kconfig.binfmt"
 
 config TRAD_SIGNALS
 	bool
-	default y if 32BIT
 
 config BUILD_ELF64
 	bool "Use 64-bit ELF format for building"
@@ -1678,7 +1744,7 @@ config BUILD_ELF64
 
 config BINFMT_IRIX
 	bool "Include IRIX binary compatibility"
-	depends on !CPU_LITTLE_ENDIAN && 32BIT && BROKEN
+	depends on CPU_BIG_ENDIAN && 32BIT && BROKEN
 
 config MIPS32_COMPAT
 	bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
@@ -1718,9 +1784,26 @@ config BINFMT_ELF32
 	bool
 	default y if MIPS32_O32 || MIPS32_N32
 
+config SECCOMP
+	bool "Enable seccomp to safely compute untrusted bytecode"
+	depends on PROC_FS && BROKEN
+	default y
+	help
+	  This kernel feature is useful for number crunching applications
+	  that may need to compute untrusted bytecode during their
+	  execution. By using pipes or other transports made available to
+	  the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in
+	  their own address space using seccomp. Once seccomp is
+	  enabled via /proc/<pid>/seccomp, it cannot be disabled
+	  and the task is only allowed to execute a few safe syscalls
+	  defined by each seccomp mode.
+
+	  If unsure, say Y. Only embedded should say N here.
+
 config PM
 	bool "Power Management support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && MACH_AU1X00
+	depends on EXPERIMENTAL && SOC_AU1X00
 
 endmenu
 
@@ -1730,6 +1813,8 @@ source "drivers/Kconfig"
 
 source "fs/Kconfig"
 
+source "arch/mips/oprofile/Kconfig"
+
 source "arch/mips/Kconfig.debug"
 
 source "security/Kconfig"
@@ -1737,18 +1822,3 @@ source "security/Kconfig"
 source "crypto/Kconfig"
 
 source "lib/Kconfig"
-
-#
-# Use the generic interrupt handling code in kernel/irq/:
-#
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config GENERIC_IRQ_PROBE
-	bool
-	default y
-
-config ISA_DMA_API
-	bool
-	default y
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 346e803f153b..02692027730a 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -52,6 +52,21 @@ ifdef CONFIG_CROSSCOMPILE
 CROSS_COMPILE		:= $(tool-prefix)
 endif
 
+CHECKFLAGS-y				+= -D__linux__ -D__mips__ \
+					   -D_ABIO32=1 \
+					   -D_ABIN32=2 \
+					   -D_ABI64=3
+CHECKFLAGS-$(CONFIG_32BIT)		+= -D_MIPS_SIM=_ABIO32 \
+					   -D_MIPS_SZLONG=32 \
+					   -D__PTRDIFF_TYPE__=int
+CHECKFLAGS-$(CONFIG_64BIT)		+= -m64 -D_MIPS_SIM=_ABI64 \
+					   -D_MIPS_SZLONG=64 \
+					   -D__PTRDIFF_TYPE__="long int"
+CHECKFLAGS-$(CONFIG_CPU_BIG_ENDIAN)	+= -D__MIPSEB__
+CHECKFLAGS-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -D__MIPSEL__
+
+CHECKFLAGS				= $(CHECKFLAGS-y)
+
 ifdef CONFIG_BUILD_ELF64
 gas-abi			= 64
 ld-emul			= $(64bit-emul)
@@ -79,9 +94,18 @@ endif
 cflags-y			+= -I $(TOPDIR)/include/asm/gcc
 cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
 cflags-y			+= $(call cc-option, -finline-limit=100000)
-LDFLAGS_vmlinux			+= -G 0 -static -n
+LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
 MODFLAGS			+= -mlong-calls
 
+#
+# We explicitly add the endianness specifier if needed, this allows
+# to compile kernels with a toolchain for the other endianness. We
+# carefully avoid to add it redundantly because gcc 3.3/3.4 complains
+# when fed the toolchain default!
+#
+cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB)
+cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL)
+
 cflags-$(CONFIG_SB1XXX_CORELIS)	+= -mno-sched-prolog -fno-omit-frame-pointer
 
 #
@@ -167,14 +191,22 @@ cflags-$(CONFIG_CPU_TX49XX)	+= \
 			$(call set_gccflags,r4600,mips3,r4600,mips3,mips2)  \
 			-Wa,--trap
 
-cflags-$(CONFIG_CPU_MIPS32)	+= \
+cflags-$(CONFIG_CPU_MIPS32_R1)	+= \
 			$(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
 			-Wa,--trap
 
-cflags-$(CONFIG_CPU_MIPS64)	+= \
+cflags-$(CONFIG_CPU_MIPS32_R2)	+= \
+			$(call set_gccflags,mips32r2,mips32r2,r4600,mips3,mips2) \
+			-Wa,--trap
+
+cflags-$(CONFIG_CPU_MIPS64_R1)	+= \
 			$(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
 			-Wa,--trap
 
+cflags-$(CONFIG_CPU_MIPS64_R2)	+= \
+			$(call set_gccflags,mips64r2,mips64r2,r4600,mips3,mips2) \
+			-Wa,--trap
+
 cflags-$(CONFIG_CPU_R5000)	+= \
 			$(call set_gccflags,r5000,mips4,r5000,mips4,mips2) \
 			-Wa,--trap
@@ -196,6 +228,7 @@ cflags-$(CONFIG_CPU_RM9000)	+= \
 			$(call set_gccflags,rm9000,mips4,r5000,mips4,mips2) \
 			-Wa,--trap
 
+
 cflags-$(CONFIG_CPU_SB1)	+= \
 			$(call set_gccflags,sb1,mips64,r5000,mips4,mips2) \
 			-Wa,--trap
@@ -266,6 +299,13 @@ cflags-$(CONFIG_MIPS_PB1550)	+= -Iinclude/asm-mips/mach-pb1x00
 load-$(CONFIG_MIPS_PB1550)	+= 0xffffffff80100000
 
 #
+# AMD Alchemy Pb1200 eval board
+#
+libs-$(CONFIG_MIPS_PB1200)	+= arch/mips/au1000/pb1200/
+cflags-$(CONFIG_MIPS_PB1200)	+= -Iinclude/asm-mips/mach-pb1x00
+load-$(CONFIG_MIPS_PB1200)	+= 0xffffffff80100000
+
+#
 # AMD Alchemy Db1000 eval board
 #
 libs-$(CONFIG_MIPS_DB1000)	+= arch/mips/au1000/db1x00/
@@ -294,6 +334,13 @@ cflags-$(CONFIG_MIPS_DB1550)	+= -Iinclude/asm-mips/mach-db1x00
 load-$(CONFIG_MIPS_DB1550)	+= 0xffffffff80100000
 
 #
+# AMD Alchemy Db1200 eval board
+#
+libs-$(CONFIG_MIPS_DB1200)	+= arch/mips/au1000/pb1200/
+cflags-$(CONFIG_MIPS_DB1200)	+= -Iinclude/asm-mips/mach-db1x00
+load-$(CONFIG_MIPS_DB1200)	+= 0xffffffff80100000
+
+#
 # AMD Alchemy Bosporus eval board
 #
 libs-$(CONFIG_MIPS_BOSPORUS)	+= arch/mips/au1000/db1x00/
@@ -323,6 +370,7 @@ load-$(CONFIG_MIPS_XXS1500)	+= 0xffffffff80100000
 # Cobalt Server
 #
 core-$(CONFIG_MIPS_COBALT)	+= arch/mips/cobalt/
+cflags-$(CONFIG_MIPS_COBALT)	+= -Iinclude/asm-mips/cobalt
 load-$(CONFIG_MIPS_COBALT)	+= 0xffffffff80080000
 
 #
@@ -389,6 +437,13 @@ core-$(CONFIG_MIPS_SEAD)	+= arch/mips/mips-boards/sead/
 load-$(CONFIG_MIPS_SEAD)	+= 0xffffffff80100000
 
 #
+# MIPS SIM
+#
+core-$(CONFIG_MIPS_SIM)		+= arch/mips/mips-boards/sim/
+cflags-$(CONFIG_MIPS_SIM)	+= -Iinclude/asm-mips/mach-sim
+load-$(CONFIG_MIPS_SIM)		+= 0x80100000
+
+#
 # Momentum Ocelot board
 #
 # The Ocelot setup.o must be linked early - it does the ioremap() for the
@@ -514,6 +569,19 @@ load-$(CONFIG_CASIO_E55)	+= 0xffffffff80004000
 load-$(CONFIG_TANBAC_TB022X)	+= 0xffffffff80000000
 
 #
+# Common Philips PNX8550
+#
+core-$(CONFIG_SOC_PNX8550)	+= arch/mips/philips/pnx8550/common/
+cflags-$(CONFIG_SOC_PNX8550)	+= -Iinclude/asm-mips/mach-pnx8550
+
+#
+# Philips PNX8550 JBS board
+#
+libs-$(CONFIG_PNX8550_JBS)	+= arch/mips/philips/pnx8550/jbs/
+#cflags-$(CONFIG_PNX8550_JBS)	+= -Iinclude/asm-mips/mach-pnx8550
+load-$(CONFIG_PNX8550_JBS)	+= 0xffffffff80060000
+
+#
 # SGI IP22 (Indy/Indigo2)
 #
 # Set the load address to >= 0xffffffff88069000 if you want to leave space for
@@ -582,10 +650,20 @@ load-$(CONFIG_SGI_IP32)		+= 0xffffffff80004000
 # removed (as happens, even if they have __initcall/module_init)
 #
 core-$(CONFIG_SIBYTE_BCM112X)	+= arch/mips/sibyte/sb1250/
-cflags-$(CONFIG_SIBYTE_BCM112X)	+= -Iinclude/asm-mips/mach-sibyte
+cflags-$(CONFIG_SIBYTE_BCM112X)	+= -Iinclude/asm-mips/mach-sibyte \
+			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
 
 core-$(CONFIG_SIBYTE_SB1250)	+= arch/mips/sibyte/sb1250/
-cflags-$(CONFIG_SIBYTE_SB1250)	+= -Iinclude/asm-mips/mach-sibyte
+cflags-$(CONFIG_SIBYTE_SB1250)	+= -Iinclude/asm-mips/mach-sibyte \
+			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
+
+core-$(CONFIG_SIBYTE_BCM1x55)	+= arch/mips/sibyte/bcm1480/
+cflags-$(CONFIG_SIBYTE_BCM1x55)	+= -Iinclude/asm-mips/mach-sibyte \
+			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
+
+core-$(CONFIG_SIBYTE_BCM1x80)	+= arch/mips/sibyte/bcm1480/
+cflags-$(CONFIG_SIBYTE_BCM1x80)	+= -Iinclude/asm-mips/mach-sibyte \
+			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
 
 #
 # Sibyte BCM91120x (Carmel) board
@@ -593,6 +671,7 @@ cflags-$(CONFIG_SIBYTE_SB1250)	+= -Iinclude/asm-mips/mach-sibyte
 # Sibyte BCM91125C (CRhone) board
 # Sibyte BCM91125E (Rhone) board
 # Sibyte SWARM board
+# Sibyte BCM91x80 (BigSur) board
 #
 libs-$(CONFIG_SIBYTE_CARMEL)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_CARMEL)	:= 0xffffffff80100000
@@ -606,6 +685,8 @@ libs-$(CONFIG_SIBYTE_SENTOSA)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_SENTOSA)	:= 0xffffffff80100000
 libs-$(CONFIG_SIBYTE_SWARM)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_SWARM)	:= 0xffffffff80100000
+libs-$(CONFIG_SIBYTE_BIGSUR)	+= arch/mips/sibyte/swarm/
+load-$(CONFIG_SIBYTE_BIGSUR)	:= 0xffffffff80100000
 
 #
 # SNI RM200 PCI
@@ -629,6 +710,13 @@ core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/tx4927/toshiba_rbtx4927/
 core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/tx4927/common/
 load-$(CONFIG_TOSHIBA_RBTX4927)	+= 0xffffffff80020000
 
+#
+# Toshiba RBTX4938 board
+#
+core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/toshiba_rbtx4938/
+core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/common/
+load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
+
 cflags-y			+= -Iinclude/asm-mips/mach-generic
 drivers-$(CONFIG_PCI)		+= arch/mips/pci/
 
@@ -701,10 +789,29 @@ ifdef CONFIG_BOOT_ELF64
 all:	$(vmlinux-64)
 endif
 
+ifdef CONFIG_MIPS_ATLAS
+all:	vmlinux.srec
+endif
+
+ifdef CONFIG_MIPS_MALTA
+all:	vmlinux.srec
+endif
+
+ifdef CONFIG_MIPS_SEAD
+all:	vmlinux.srec
+endif
+
+ifdef CONFIG_QEMU
+all:	vmlinux.bin
+endif
+
 ifdef CONFIG_SNI_RM200_PCI
 all:	vmlinux.ecoff
 endif
 
+vmlinux.bin: $(vmlinux-32)
+	+@$(call makeboot,$@)
+
 vmlinux.ecoff vmlinux.rm200: $(vmlinux-32)
 	+@$(call makeboot,$@)
 
@@ -720,7 +827,6 @@ archclean:
 	@$(MAKE) $(clean)=arch/mips/boot
 	@$(MAKE) $(clean)=arch/mips/lasat
 
-
 CLEAN_FILES += vmlinux.32 \
 	       vmlinux.64 \
 	       vmlinux.ecoff
diff --git a/arch/mips/arc/Makefile b/arch/mips/arc/Makefile
index e8424932e1a3..4f349ec1ea2d 100644
--- a/arch/mips/arc/Makefile
+++ b/arch/mips/arc/Makefile
@@ -3,7 +3,7 @@
 #
 
 lib-y				+= cmdline.o env.o file.o identify.o init.o \
-				   misc.o time.o tree.o
+				   misc.o salone.o time.o tree.o
 
 lib-$(CONFIG_ARC_MEMORY)	+= memory.o
 lib-$(CONFIG_ARC_CONSOLE)	+= arc_con.o
diff --git a/arch/mips/arc/identify.c b/arch/mips/arc/identify.c
index 0dd7a345eb79..1bd6199e174a 100644
--- a/arch/mips/arc/identify.c
+++ b/arch/mips/arc/identify.c
@@ -44,6 +44,11 @@ static struct smatch mach_table[] = {
 		MACH_GROUP_SGI,
 		MACH_SGI_IP28,
 		PROM_FLAG_ARCS
+	}, {	"SGI-IP30",
+		"SGI Octane",
+		MACH_GROUP_SGI,
+		MACH_SGI_IP30,
+		PROM_FLAG_ARCS
 	}, {	"SGI-IP32",
 		"SGI O2",
 		MACH_GROUP_SGI,
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile
index 594b75e5e080..a1edfd1f643c 100644
--- a/arch/mips/au1000/common/Makefile
+++ b/arch/mips/au1000/common/Makefile
@@ -8,7 +8,7 @@
 
 obj-y += prom.o int-handler.o irq.o puts.o time.o reset.o \
 	au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
-	sleeper.o cputable.o dma.o dbdma.o
+	sleeper.o cputable.o dma.o dbdma.o gpio.o
 
 obj-$(CONFIG_AU1X00_USB_DEVICE)	+= usbdev.o
 obj-$(CONFIG_KGDB)		+= dbg_io.o
diff --git a/arch/mips/au1000/common/au1xxx_irqmap.c b/arch/mips/au1000/common/au1xxx_irqmap.c
index 8a0f39f67c59..0b2c03c52319 100644
--- a/arch/mips/au1000/common/au1xxx_irqmap.c
+++ b/arch/mips/au1000/common/au1xxx_irqmap.c
@@ -173,14 +173,14 @@ au1xxx_irq_map_t au1xxx_ic0_map[] = {
 	{ AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
 	{ AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
 	{ AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0},
-	{ AU1550_TOY_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
-	{ AU1550_RTC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
+	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
 	{ AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0},
 	{ AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
 	{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
@@ -201,14 +201,14 @@ au1xxx_irq_map_t au1xxx_ic0_map[] = {
 	{ AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
 	{ AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0},
 	{ AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0},
-	{ AU1200_TOY_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
-	{ AU1200_RTC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
+	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
 	{ AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0},
 	{ AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 },
 	{ AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c
index f5521dfccfd6..4dbde82c8215 100644
--- a/arch/mips/au1000/common/cputable.c
+++ b/arch/mips/au1000/common/cputable.c
@@ -37,7 +37,8 @@ struct cpu_spec	cpu_specs[] = {
     { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 },
     { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
     { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
-    { 0xffffffff, 0x04030200, "Au1200 AA", 0, 1 },
+    { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
+    { 0xffffffff, 0x04030201, "Au1200 AC", 0, 1 },
     { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
 };
 
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c
index adfc3172aace..d00e8247d6c2 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/au1000/common/dbdma.c
@@ -29,6 +29,7 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
+
 #include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -38,10 +39,12 @@
 #include <linux/string.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/system.h>
 
+
 #if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
 
 /*
@@ -61,37 +64,10 @@ static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
 */
 #define ALIGN_ADDR(x, a)	((((u32)(x)) + (a-1)) & ~(a-1))
 
-static volatile dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
-static int dbdma_initialized;
+static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
+static int dbdma_initialized=0;
 static void au1xxx_dbdma_init(void);
 
-typedef struct dbdma_device_table {
-	u32		dev_id;
-	u32		dev_flags;
-	u32		dev_tsize;
-	u32		dev_devwidth;
-	u32		dev_physaddr;		/* If FIFO */
-	u32		dev_intlevel;
-	u32		dev_intpolarity;
-} dbdev_tab_t;
-
-typedef struct dbdma_chan_config {
-	u32			chan_flags;
-	u32			chan_index;
-	dbdev_tab_t		*chan_src;
-	dbdev_tab_t		*chan_dest;
-	au1x_dma_chan_t		*chan_ptr;
-	au1x_ddma_desc_t	*chan_desc_base;
-	au1x_ddma_desc_t	*get_ptr, *put_ptr, *cur_ptr;
-	void			*chan_callparam;
-	void (*chan_callback)(int, void *, struct pt_regs *);
-} chan_tab_t;
-
-#define	DEV_FLAGS_INUSE		(1 << 0)
-#define	DEV_FLAGS_ANYUSE	(1 << 1)
-#define DEV_FLAGS_OUT		(1 << 2)
-#define DEV_FLAGS_IN		(1 << 3)
-
 static dbdev_tab_t dbdev_tab[] = {
 #ifdef CONFIG_SOC_AU1550
 	/* UARTS */
@@ -157,25 +133,25 @@ static dbdev_tab_t dbdev_tab[] = {
 	{ DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
 	{ DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
 
-	{ DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+	{ DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
+	{ DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
+	{ DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
+	{ DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 },
 
-	{ DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_AES_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+	{ DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
+	{ DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
 
-	{ DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
-	{ DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 },
+	{ DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 },
+	{ DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 },
 	{ DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
 
-	{ DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 },
-	{ DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 },
+	{ DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 },
+	{ DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 },
 	{ DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
 
-	{ DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+	{ DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
+	{ DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
+	{ DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
 	{ DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
 
 	{ DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
@@ -184,6 +160,24 @@ static dbdev_tab_t dbdev_tab[] = {
 
 	{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
 	{ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+	/* Provide 16 user definable device types */
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ 0, 0, 0, 0, 0, 0, 0 },
 };
 
 #define DBDEV_TAB_SIZE (sizeof(dbdev_tab) / sizeof(dbdev_tab_t))
@@ -203,6 +197,36 @@ find_dbdev_id (u32 id)
 	return NULL;
 }
 
+void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
+{
+        return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+}
+EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt);
+
+u32
+au1xxx_ddma_add_device(dbdev_tab_t *dev)
+{
+	u32 ret = 0;
+	dbdev_tab_t *p=NULL;
+	static u16 new_id=0x1000;
+
+	p = find_dbdev_id(0);
+	if ( NULL != p )
+	{
+		memcpy(p, dev, sizeof(dbdev_tab_t));
+ 		p->dev_id = DSCR_DEV2CUSTOM_ID(new_id,dev->dev_id);
+		ret = p->dev_id;
+		new_id++;
+#if 0
+		printk("add_device: id:%x flags:%x padd:%x\n",
+				p->dev_id, p->dev_flags, p->dev_physaddr );
+#endif
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(au1xxx_ddma_add_device);
+
 /* Allocate a channel and return a non-zero descriptor if successful.
 */
 u32
@@ -215,7 +239,7 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 	int		i;
 	dbdev_tab_t	*stp, *dtp;
 	chan_tab_t	*ctp;
-	volatile au1x_dma_chan_t *cp;
+	au1x_dma_chan_t *cp;
 
 	/* We do the intialization on the first channel allocation.
 	 * We have to wait because of the interrupt handler initialization
@@ -225,9 +249,6 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 		au1xxx_dbdma_init();
 	dbdma_initialized = 1;
 
-	if ((srcid > DSCR_NDEV_IDS) || (destid > DSCR_NDEV_IDS))
-		return 0;
-
 	if ((stp = find_dbdev_id(srcid)) == NULL) return 0;
 	if ((dtp = find_dbdev_id(destid)) == NULL) return 0;
 
@@ -271,7 +292,6 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 				 */
 				ctp = kmalloc(sizeof(chan_tab_t), GFP_KERNEL);
 				chan_tab_ptr[i] = ctp;
-				ctp->chan_index = chan = i;
 				break;
 			}
 		}
@@ -279,10 +299,11 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 
 		if (ctp != NULL) {
 			memset(ctp, 0, sizeof(chan_tab_t));
+			ctp->chan_index = chan = i;
 			dcp = DDMA_CHANNEL_BASE;
 			dcp += (0x0100 * chan);
 			ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
-			cp = (volatile au1x_dma_chan_t *)dcp;
+			cp = (au1x_dma_chan_t *)dcp;
 			ctp->chan_src = stp;
 			ctp->chan_dest = dtp;
 			ctp->chan_callback = callback;
@@ -299,6 +320,9 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 				i |= DDMA_CFG_DED;
 			if (dtp->dev_intpolarity)
 				i |= DDMA_CFG_DP;
+			if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
+				(dtp->dev_flags & DEV_FLAGS_SYNC))
+					i |= DDMA_CFG_SYNC;
 			cp->ddma_cfg = i;
 			au_sync();
 
@@ -309,14 +333,14 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 			rv = (u32)(&chan_tab_ptr[chan]);
 		}
 		else {
-			/* Release devices.
-			*/
+			/* Release devices */
 			stp->dev_flags &= ~DEV_FLAGS_INUSE;
 			dtp->dev_flags &= ~DEV_FLAGS_INUSE;
 		}
 	}
 	return rv;
 }
+EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
 
 /* Set the device width if source or destination is a FIFO.
  * Should be 8, 16, or 32 bits.
@@ -344,6 +368,7 @@ au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
 
 	return rv;
 }
+EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
 
 /* Allocate a descriptor ring, initializing as much as possible.
 */
@@ -370,7 +395,8 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 	 * and if we try that first we are likely to not waste larger
 	 * slabs of memory.
 	 */
-	desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), GFP_KERNEL);
+	desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t),
+			GFP_KERNEL|GFP_DMA);
 	if (desc_base == 0)
 		return 0;
 
@@ -381,7 +407,7 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 		kfree((const void *)desc_base);
 		i = entries * sizeof(au1x_ddma_desc_t);
 		i += (sizeof(au1x_ddma_desc_t) - 1);
-		if ((desc_base = (u32)kmalloc(i, GFP_KERNEL)) == 0)
+		if ((desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA)) == 0)
 			return 0;
 
 		desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
@@ -403,7 +429,13 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 	cmd0 |= DSCR_CMD0_SID(srcid);
 	cmd0 |= DSCR_CMD0_DID(destid);
 	cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV;
-	cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_CURRENT);
+	cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE);
+
+        /* is it mem to mem transfer? */
+        if(((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
+           ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS))) {
+               cmd0 |= DSCR_CMD0_MEM;
+        }
 
 	switch (stp->dev_devwidth) {
 	case 8:
@@ -461,9 +493,14 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 	/* If source input is fifo, set static address.
 	*/
 	if (stp->dev_flags & DEV_FLAGS_IN) {
-		src0 = stp->dev_physaddr;
+		if ( stp->dev_flags & DEV_FLAGS_BURSTABLE )
+			src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
+		else
 		src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
+
 	}
+	if (stp->dev_physaddr)
+		src0 = stp->dev_physaddr;
 
 	/* Set up dest1.  For now, assume no stride and increment.
 	 * A channel attribute update can change this later.
@@ -487,10 +524,18 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 	/* If destination output is fifo, set static address.
 	*/
 	if (dtp->dev_flags & DEV_FLAGS_OUT) {
-		dest0 = dtp->dev_physaddr;
+		if ( dtp->dev_flags & DEV_FLAGS_BURSTABLE )
+	                dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
+				else
 		dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
 	}
+	if (dtp->dev_physaddr)
+		dest0 = dtp->dev_physaddr;
 
+#if 0
+		printk("did:%x sid:%x cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+			dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, src1, dest0, dest1 );
+#endif
 	for (i=0; i<entries; i++) {
 		dp->dscr_cmd0 = cmd0;
 		dp->dscr_cmd1 = cmd1;
@@ -499,6 +544,8 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 		dp->dscr_dest0 = dest0;
 		dp->dscr_dest1 = dest1;
 		dp->dscr_stat = 0;
+		dp->sw_context = 0;
+		dp->sw_status = 0;
 		dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1));
 		dp++;
 	}
@@ -511,13 +558,14 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 
 	return (u32)(ctp->chan_desc_base);
 }
+EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
 
 /* Put a source buffer into the DMA ring.
  * This updates the source pointer and byte count.  Normally used
  * for memory to fifo transfers.
  */
 u32
-au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes)
+_au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
 {
 	chan_tab_t		*ctp;
 	au1x_ddma_desc_t	*dp;
@@ -544,8 +592,24 @@ au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes)
 	*/
 	dp->dscr_source0 = virt_to_phys(buf);
 	dp->dscr_cmd1 = nbytes;
-	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
-	ctp->chan_ptr->ddma_dbell = 0xffffffff;	/* Make it go */
+	/* Check flags  */
+	if (flags & DDMA_FLAGS_IE)
+		dp->dscr_cmd0 |= DSCR_CMD0_IE;
+	if (flags & DDMA_FLAGS_NOIE)
+		dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+
+	/*
+	 * There is an errata on the Au1200/Au1550 parts that could result
+	 * in "stale" data being DMA'd. It has to do with the snoop logic on
+	 * the dache eviction buffer.  NONCOHERENT_IO is on by default for
+	 * these parts. If it is fixedin the future, these dma_cache_inv will
+	 * just be nothing more than empty macros. See io.h.
+	 * */
+	dma_cache_wback_inv((unsigned long)buf, nbytes);
+        dp->dscr_cmd0 |= DSCR_CMD0_V;        /* Let it rip */
+	au_sync();
+	dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
+        ctp->chan_ptr->ddma_dbell = 0;
 
 	/* Get next descriptor pointer.
 	*/
@@ -555,13 +619,14 @@ au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes)
 	*/
 	return nbytes;
 }
+EXPORT_SYMBOL(_au1xxx_dbdma_put_source);
 
 /* Put a destination buffer into the DMA ring.
  * This updates the destination pointer and byte count.  Normally used
  * to place an empty buffer into the ring for fifo to memory transfers.
  */
 u32
-au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes)
+_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
 {
 	chan_tab_t		*ctp;
 	au1x_ddma_desc_t	*dp;
@@ -583,11 +648,33 @@ au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes)
 	if (dp->dscr_cmd0 & DSCR_CMD0_V)
 		return 0;
 
-	/* Load up buffer address and byte count.
-	*/
+	/* Load up buffer address and byte count */
+
+	/* Check flags  */
+	if (flags & DDMA_FLAGS_IE)
+		dp->dscr_cmd0 |= DSCR_CMD0_IE;
+	if (flags & DDMA_FLAGS_NOIE)
+		dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+
 	dp->dscr_dest0 = virt_to_phys(buf);
 	dp->dscr_cmd1 = nbytes;
+#if 0
+	printk("cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+			dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
+			dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1 );
+#endif
+	/*
+	 * There is an errata on the Au1200/Au1550 parts that could result in
+	 * "stale" data being DMA'd. It has to do with the snoop logic on the
+	 * dache eviction buffer. NONCOHERENT_IO is on by default for these
+	 * parts. If it is fixedin the future, these dma_cache_inv will just
+	 * be nothing more than empty macros. See io.h.
+	 * */
+	dma_cache_inv((unsigned long)buf,nbytes);
 	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
+	au_sync();
+	dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
+        ctp->chan_ptr->ddma_dbell = 0;
 
 	/* Get next descriptor pointer.
 	*/
@@ -597,6 +684,7 @@ au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes)
 	*/
 	return nbytes;
 }
+EXPORT_SYMBOL(_au1xxx_dbdma_put_dest);
 
 /* Get a destination buffer into the DMA ring.
  * Normally used to get a full buffer from the ring during fifo
@@ -646,7 +734,7 @@ void
 au1xxx_dbdma_stop(u32 chanid)
 {
 	chan_tab_t	*ctp;
-	volatile au1x_dma_chan_t *cp;
+	au1x_dma_chan_t *cp;
 	int halt_timeout = 0;
 
 	ctp = *((chan_tab_t **)chanid);
@@ -666,6 +754,7 @@ au1xxx_dbdma_stop(u32 chanid)
 	cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V);
 	au_sync();
 }
+EXPORT_SYMBOL(au1xxx_dbdma_stop);
 
 /* Start using the current descriptor pointer.  If the dbdma encounters
  * a not valid descriptor, it will stop.  In this case, we can just
@@ -675,17 +764,17 @@ void
 au1xxx_dbdma_start(u32 chanid)
 {
 	chan_tab_t	*ctp;
-	volatile au1x_dma_chan_t *cp;
+	au1x_dma_chan_t *cp;
 
 	ctp = *((chan_tab_t **)chanid);
-
 	cp = ctp->chan_ptr;
 	cp->ddma_desptr = virt_to_phys(ctp->cur_ptr);
 	cp->ddma_cfg |= DDMA_CFG_EN;	/* Enable channel */
 	au_sync();
-	cp->ddma_dbell = 0xffffffff;	/* Make it go */
+	cp->ddma_dbell = 0;
 	au_sync();
 }
+EXPORT_SYMBOL(au1xxx_dbdma_start);
 
 void
 au1xxx_dbdma_reset(u32 chanid)
@@ -704,15 +793,21 @@ au1xxx_dbdma_reset(u32 chanid)
 
 	do {
 		dp->dscr_cmd0 &= ~DSCR_CMD0_V;
+		/* reset our SW status -- this is used to determine
+		 * if a descriptor is in use by upper level SW. Since
+		 * posting can reset 'V' bit.
+		 */
+		dp->sw_status = 0;
 		dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 	} while (dp != ctp->chan_desc_base);
 }
+EXPORT_SYMBOL(au1xxx_dbdma_reset);
 
 u32
 au1xxx_get_dma_residue(u32 chanid)
 {
 	chan_tab_t	*ctp;
-	volatile au1x_dma_chan_t *cp;
+	au1x_dma_chan_t *cp;
 	u32		rv;
 
 	ctp = *((chan_tab_t **)chanid);
@@ -738,8 +833,7 @@ au1xxx_dbdma_chan_free(u32 chanid)
 
 	au1xxx_dbdma_stop(chanid);
 
-	if (ctp->chan_desc_base != NULL)
-		kfree(ctp->chan_desc_base);
+	kfree((void *)ctp->chan_desc_base);
 
 	stp->dev_flags &= ~DEV_FLAGS_INUSE;
 	dtp->dev_flags &= ~DEV_FLAGS_INUSE;
@@ -747,15 +841,16 @@ au1xxx_dbdma_chan_free(u32 chanid)
 
 	kfree(ctp);
 }
+EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
 
 static irqreturn_t
 dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
-	u32	intstat;
-	u32	chan_index;
+	u32 intstat;
+	u32 chan_index;
 	chan_tab_t		*ctp;
 	au1x_ddma_desc_t	*dp;
-	volatile au1x_dma_chan_t *cp;
+	au1x_dma_chan_t *cp;
 
 	intstat = dbdma_gptr->ddma_intstat;
 	au_sync();
@@ -774,19 +869,27 @@ dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		(ctp->chan_callback)(irq, ctp->chan_callparam, regs);
 
 	ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
-
-	return IRQ_HANDLED;
+	return IRQ_RETVAL(1);
 }
 
-static void
-au1xxx_dbdma_init(void)
+static void au1xxx_dbdma_init(void)
 {
+	int irq_nr;
+
 	dbdma_gptr->ddma_config = 0;
 	dbdma_gptr->ddma_throttle = 0;
 	dbdma_gptr->ddma_inten = 0xffff;
 	au_sync();
 
-	if (request_irq(AU1550_DDMA_INT, dbdma_interrupt, SA_INTERRUPT,
+#if defined(CONFIG_SOC_AU1550)
+	irq_nr = AU1550_DDMA_INT;
+#elif defined(CONFIG_SOC_AU1200)
+	irq_nr = AU1200_DDMA_INT;
+#else
+	#error Unknown Au1x00 SOC
+#endif
+
+	if (request_irq(irq_nr, dbdma_interrupt, SA_INTERRUPT,
 			"Au1xxx dbdma", (void *)dbdma_gptr))
 		printk("Can't get 1550 dbdma irq");
 }
@@ -797,7 +900,8 @@ au1xxx_dbdma_dump(u32 chanid)
 	chan_tab_t		*ctp;
 	au1x_ddma_desc_t	*dp;
 	dbdev_tab_t		*stp, *dtp;
-	volatile au1x_dma_chan_t *cp;
+	au1x_dma_chan_t *cp;
+		u32			i = 0;
 
 	ctp = *((chan_tab_t **)chanid);
 	stp = ctp->chan_src;
@@ -822,15 +926,64 @@ au1xxx_dbdma_dump(u32 chanid)
 	dp = ctp->chan_desc_base;
 
 	do {
-		printk("dp %08x, cmd0 %08x, cmd1 %08x\n",
-			(u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
-		printk("src0 %08x, src1 %08x, dest0 %08x\n",
-			dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0);
-		printk("dest1 %08x, stat %08x, nxtptr %08x\n",
-			dp->dscr_dest1, dp->dscr_stat, dp->dscr_nxtptr);
+                printk("Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
+                        i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
+                printk("src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
+                        dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
+                printk("stat %08x, nxtptr %08x\n",
+                        dp->dscr_stat, dp->dscr_nxtptr);
 		dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 	} while (dp != ctp->chan_desc_base);
 }
 
+/* Put a descriptor into the DMA ring.
+ * This updates the source/destination pointers and byte count.
+ */
+u32
+au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr )
+{
+	chan_tab_t *ctp;
+	au1x_ddma_desc_t *dp;
+	u32 nbytes=0;
+
+	/* I guess we could check this to be within the
+	* range of the table......
+	*/
+	ctp = *((chan_tab_t **)chanid);
+
+	/* We should have multiple callers for a particular channel,
+	* an interrupt doesn't affect this pointer nor the descriptor,
+	* so no locking should be needed.
+	*/
+	dp = ctp->put_ptr;
+
+	/* If the descriptor is valid, we are way ahead of the DMA
+	* engine, so just return an error condition.
+	*/
+	if (dp->dscr_cmd0 & DSCR_CMD0_V)
+		return 0;
+
+	/* Load up buffer addresses and byte count.
+	*/
+	dp->dscr_dest0 = dscr->dscr_dest0;
+	dp->dscr_source0 = dscr->dscr_source0;
+	dp->dscr_dest1 = dscr->dscr_dest1;
+	dp->dscr_source1 = dscr->dscr_source1;
+	dp->dscr_cmd1 = dscr->dscr_cmd1;
+	nbytes = dscr->dscr_cmd1;
+	/* Allow the caller to specifiy if an interrupt is generated */
+	dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+	dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
+	ctp->chan_ptr->ddma_dbell = 0;
+
+	/* Get next descriptor pointer.
+	*/
+	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+
+	/* return something not zero.
+	*/
+	return nbytes;
+}
+
 #endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
 
diff --git a/arch/mips/au1000/common/dma.c b/arch/mips/au1000/common/dma.c
index 372c33f1353d..1905c6b104f2 100644
--- a/arch/mips/au1000/common/dma.c
+++ b/arch/mips/au1000/common/dma.c
@@ -39,7 +39,6 @@
 #include <linux/string.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/module.h>
 #include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1000_dma.h>
diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c
new file mode 100644
index 000000000000..5f5915b83142
--- /dev/null
+++ b/arch/mips/au1000/common/gpio.c
@@ -0,0 +1,119 @@
+/*
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <au1000.h>
+#include <au1xxx_gpio.h>
+
+#define gpio1 sys
+#if !defined(CONFIG_SOC_AU1000)
+static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE;
+
+#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000
+
+int au1xxx_gpio2_read(int signal)
+{
+	signal -= 200;
+/*	gpio2->dir &= ~(0x01 << signal);						//Set GPIO to input */
+	return ((gpio2->pinstate >> signal) & 0x01);
+}
+
+void au1xxx_gpio2_write(int signal, int value)
+{
+	signal -= 200;
+
+	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) |
+		(value << signal);
+}
+
+void au1xxx_gpio2_tristate(int signal)
+{
+	signal -= 200;
+	gpio2->dir &= ~(0x01 << signal); 	/* Set GPIO to input */
+}
+#endif
+
+int au1xxx_gpio1_read(int signal)
+{
+/*	gpio1->trioutclr |= (0x01 << signal); */
+	return ((gpio1->pinstaterd >> signal) & 0x01);
+}
+
+void au1xxx_gpio1_write(int signal, int value)
+{
+	if(value)
+		gpio1->outputset = (0x01 << signal);
+	else
+		gpio1->outputclr = (0x01 << signal);	/* Output a Zero */
+}
+
+void au1xxx_gpio1_tristate(int signal)
+{
+	gpio1->trioutclr = (0x01 << signal);		/* Tristate signal */
+}
+
+
+int au1xxx_gpio_read(int signal)
+{
+	if(signal >= 200)
+#if defined(CONFIG_SOC_AU1000)
+		return 0;
+#else
+		return au1xxx_gpio2_read(signal);
+#endif
+	else
+		return au1xxx_gpio1_read(signal);
+}
+
+void au1xxx_gpio_write(int signal, int value)
+{
+	if(signal >= 200)
+#if defined(CONFIG_SOC_AU1000)
+		;
+#else
+		au1xxx_gpio2_write(signal, value);
+#endif
+	else
+		au1xxx_gpio1_write(signal, value);
+}
+
+void au1xxx_gpio_tristate(int signal)
+{
+	if(signal >= 200)
+#if defined(CONFIG_SOC_AU1000)
+		;
+#else
+		au1xxx_gpio2_tristate(signal);
+#endif
+	else
+		au1xxx_gpio1_tristate(signal);
+}
+
+void au1xxx_gpio1_set_inputs(void)
+{
+	gpio1->pininputen = 0;
+}
+
+EXPORT_SYMBOL(au1xxx_gpio1_set_inputs);
+EXPORT_SYMBOL(au1xxx_gpio_tristate);
+EXPORT_SYMBOL(au1xxx_gpio_write);
+EXPORT_SYMBOL(au1xxx_gpio_read);
diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c
index d1eb5a4a9a19..1339a0979f66 100644
--- a/arch/mips/au1000/common/irq.c
+++ b/arch/mips/au1000/common/irq.c
@@ -83,7 +83,7 @@ inline void local_disable_irq(unsigned int irq_nr);
 void	(*board_init_irq)(void);
 
 #ifdef CONFIG_PM
-extern void counter0_irq(int irq, void *dev_id, struct pt_regs *regs);
+extern irqreturn_t counter0_irq(int irq, void *dev_id, struct pt_regs *regs);
 #endif
 
 static DEFINE_SPINLOCK(irq_lock);
@@ -253,52 +253,72 @@ void restore_local_and_enable(int controller, unsigned long mask)
 
 
 static struct hw_interrupt_type rise_edge_irq_type = {
-	"Au1000 Rise Edge",
-	startup_irq,
-	shutdown_irq,
-	local_enable_irq,
-	local_disable_irq,
-	mask_and_ack_rise_edge_irq,
-	end_irq,
-	NULL
+	.typename = "Au1000 Rise Edge",
+	.startup = startup_irq,
+	.shutdown = shutdown_irq,
+	.enable = local_enable_irq,
+	.disable = local_disable_irq,
+	.ack = mask_and_ack_rise_edge_irq,
+	.end = end_irq,
 };
 
 static struct hw_interrupt_type fall_edge_irq_type = {
-	"Au1000 Fall Edge",
-	startup_irq,
-	shutdown_irq,
-	local_enable_irq,
-	local_disable_irq,
-	mask_and_ack_fall_edge_irq,
-	end_irq,
-	NULL
+	.typename = "Au1000 Fall Edge",
+	.startup = startup_irq,
+	.shutdown = shutdown_irq,
+	.enable = local_enable_irq,
+	.disable = local_disable_irq,
+	.ack = mask_and_ack_fall_edge_irq,
+	.end = end_irq,
 };
 
 static struct hw_interrupt_type either_edge_irq_type = {
-	"Au1000 Rise or Fall Edge",
-	startup_irq,
-	shutdown_irq,
-	local_enable_irq,
-	local_disable_irq,
-	mask_and_ack_either_edge_irq,
-	end_irq,
-	NULL
+	.typename = "Au1000 Rise or Fall Edge",
+	.startup = startup_irq,
+	.shutdown = shutdown_irq,
+	.enable = local_enable_irq,
+	.disable = local_disable_irq,
+	.ack = mask_and_ack_either_edge_irq,
+	.end = end_irq,
 };
 
 static struct hw_interrupt_type level_irq_type = {
-	"Au1000 Level",
-	startup_irq,
-	shutdown_irq,
-	local_enable_irq,
-	local_disable_irq,
-	mask_and_ack_level_irq,
-	end_irq,
-	NULL
+	.typename = "Au1000 Level",
+	.startup = startup_irq,
+	.shutdown = shutdown_irq,
+	.enable = local_enable_irq,
+	.disable = local_disable_irq,
+	.ack = mask_and_ack_level_irq,
+	.end = end_irq,
 };
 
 #ifdef CONFIG_PM
-void startup_match20_interrupt(void)
+void startup_match20_interrupt(irqreturn_t (*handler)(int, void *, struct pt_regs *))
 {
+	struct irq_desc *desc = &irq_desc[AU1000_TOY_MATCH2_INT];
+
+	static struct irqaction action;
+	memset(&action, 0, sizeof(struct irqaction));
+
+	/* This is a big problem.... since we didn't use request_irq
+	 * when kernel/irq.c calls probe_irq_xxx this interrupt will
+	 * be probed for usage. This will end up disabling the device :(
+	 * Give it a bogus "action" pointer -- this will keep it from
+	 * getting auto-probed!
+	 *
+	 * By setting the status to match that of request_irq() we
+	 * can avoid it.  --cgray
+	*/
+	action.dev_id = handler;
+	action.flags = SA_INTERRUPT;
+	cpus_clear(action.mask);
+	action.name = "Au1xxx TOY";
+	action.handler = handler;
+	action.next = NULL;
+
+	desc->action = &action;
+	desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS);
+
 	local_enable_irq(AU1000_TOY_MATCH2_INT);
 }
 #endif
@@ -426,7 +446,6 @@ void __init arch_init_irq(void)
 	extern int au1xxx_ic0_nr_irqs;
 
 	cp0_status = read_c0_status();
-	memset(irq_desc, 0, sizeof(irq_desc));
 	set_except_vector(0, au1000_IRQ);
 
 	/* Initialize interrupt controllers to a safe state.
@@ -492,7 +511,7 @@ void intc0_req0_irqdispatch(struct pt_regs *regs)
 	intc0_req0 |= au_readl(IC0_REQ0INT);
 
 	if (!intc0_req0) return;
-
+#ifdef AU1000_USB_DEV_REQ_INT
 	/*
 	 * Because of the tight timing of SETUP token to reply
 	 * transactions, the USB devices-side packet complete
@@ -503,7 +522,7 @@ void intc0_req0_irqdispatch(struct pt_regs *regs)
 		do_IRQ(AU1000_USB_DEV_REQ_INT, regs);
 		return;
 	}
-
+#endif
 	irq = au_ffs(intc0_req0) - 1;
 	intc0_req0 &= ~(1<<irq);
 	do_IRQ(irq, regs);
@@ -521,17 +540,7 @@ void intc0_req1_irqdispatch(struct pt_regs *regs)
 
 	irq = au_ffs(intc0_req1) - 1;
 	intc0_req1 &= ~(1<<irq);
-#ifdef CONFIG_PM
-	if (irq == AU1000_TOY_MATCH2_INT) {
-		mask_and_ack_rise_edge_irq(irq);
-		counter0_irq(irq, NULL, regs);
-		local_enable_irq(irq);
-	}
-	else
-#endif
-	{
-		do_IRQ(irq, regs);
-	}
+	do_IRQ(irq, regs);
 }
 
 
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 0776b2db5641..1f7b465c8038 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -7,13 +7,15 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
+#include <linux/config.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/resource.h>
 
-#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx.h>
 
+/* OHCI (USB full speed host controller) */
 static struct resource au1xxx_usb_ohci_resources[] = {
 	[0] = {
 		.start		= USB_OHCI_BASE,
@@ -41,8 +43,252 @@ static struct platform_device au1xxx_usb_ohci_device = {
 	.resource	= au1xxx_usb_ohci_resources,
 };
 
+/*** AU1100 LCD controller ***/
+
+#ifdef CONFIG_FB_AU1100
+static struct resource au1100_lcd_resources[] = {
+	[0] = {
+		.start          = LCD_PHYS_ADDR,
+		.end            = LCD_PHYS_ADDR + 0x800 - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start          = AU1100_LCD_INT,
+		.end            = AU1100_LCD_INT,
+		.flags          = IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1100_lcd_dmamask = ~(u32)0;
+
+static struct platform_device au1100_lcd_device = {
+	.name           = "au1100-lcd",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = &au1100_lcd_dmamask,
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(au1100_lcd_resources),
+	.resource       = au1100_lcd_resources,
+};
+#endif
+
+#ifdef CONFIG_SOC_AU1200
+/* EHCI (USB high speed host controller) */
+static struct resource au1xxx_usb_ehci_resources[] = {
+	[0] = {
+		.start		= USB_EHCI_BASE,
+		.end		= USB_EHCI_BASE + USB_EHCI_LEN - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= AU1000_USB_HOST_INT,
+		.end		= AU1000_USB_HOST_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 ehci_dmamask = ~(u32)0;
+
+static struct platform_device au1xxx_usb_ehci_device = {
+	.name		= "au1xxx-ehci",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(au1xxx_usb_ehci_resources),
+	.resource	= au1xxx_usb_ehci_resources,
+};
+
+/* Au1200 UDC (USB gadget controller) */
+static struct resource au1xxx_usb_gdt_resources[] = {
+	[0] = {
+		.start		= USB_UDC_BASE,
+		.end		= USB_UDC_BASE + USB_UDC_LEN - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= AU1200_USB_INT,
+		.end		= AU1200_USB_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource au1xxx_mmc_resources[] = {
+	[0] = {
+		.start          = SD0_PHYS_ADDR,
+		.end            = SD0_PHYS_ADDR + 0x40,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= SD1_PHYS_ADDR,
+		.end 		= SD1_PHYS_ADDR + 0x40,
+		.flags		= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start          = AU1200_SD_INT,
+		.end            = AU1200_SD_INT,
+		.flags          = IORESOURCE_IRQ,
+	}
+};
+
+static u64 udc_dmamask = ~(u32)0;
+
+static struct platform_device au1xxx_usb_gdt_device = {
+	.name		= "au1xxx-udc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &udc_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(au1xxx_usb_gdt_resources),
+	.resource	= au1xxx_usb_gdt_resources,
+};
+
+/* Au1200 UOC (USB OTG controller) */
+static struct resource au1xxx_usb_otg_resources[] = {
+	[0] = {
+		.start		= USB_UOC_BASE,
+		.end		= USB_UOC_BASE + USB_UOC_LEN - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= AU1200_USB_INT,
+		.end		= AU1200_USB_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 uoc_dmamask = ~(u32)0;
+
+static struct platform_device au1xxx_usb_otg_device = {
+	.name		= "au1xxx-uoc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &uoc_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(au1xxx_usb_otg_resources),
+	.resource	= au1xxx_usb_otg_resources,
+};
+
+static struct resource au1200_lcd_resources[] = {
+	[0] = {
+		.start          = LCD_PHYS_ADDR,
+		.end            = LCD_PHYS_ADDR + 0x800 - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start          = AU1200_LCD_INT,
+		.end            = AU1200_LCD_INT,
+		.flags          = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource au1200_ide0_resources[] = {
+	[0] = {
+		.start		= AU1XXX_ATA_PHYS_ADDR,
+		.end 		= AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= AU1XXX_ATA_INT,
+		.end		= AU1XXX_ATA_INT,
+		.flags		= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1200_lcd_dmamask = ~(u32)0;
+
+static struct platform_device au1200_lcd_device = {
+	.name           = "au1200-lcd",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = &au1200_lcd_dmamask,
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(au1200_lcd_resources),
+	.resource       = au1200_lcd_resources,
+};
+
+
+static u64 ide0_dmamask = ~(u32)0;
+
+static struct platform_device au1200_ide0_device = {
+	.name		= "au1200-ide",
+	.id		= 0,
+	.dev = {
+		.dma_mask 		= &ide0_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources = ARRAY_SIZE(au1200_ide0_resources),
+	.resource	= au1200_ide0_resources,
+};
+
+static u64 au1xxx_mmc_dmamask =  ~(u32)0;
+
+static struct platform_device au1xxx_mmc_device = {
+	.name = "au1xxx-mmc",
+	.id = 0,
+	.dev = {
+		.dma_mask               = &au1xxx_mmc_dmamask,
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(au1xxx_mmc_resources),
+	.resource       = au1xxx_mmc_resources,
+};
+#endif /* #ifdef CONFIG_SOC_AU1200 */
+
+static struct platform_device au1x00_pcmcia_device = {
+	.name 		= "au1x00-pcmcia",
+	.id 		= 0,
+};
+
+#ifdef CONFIG_MIPS_DB1200
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name	= "smc91x-regs",
+		.start	= AU1XXX_SMC91111_PHYS_ADDR,
+		.end	= AU1XXX_SMC91111_PHYS_ADDR + 0xfffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1XXX_SMC91111_IRQ,
+		.end	= AU1XXX_SMC91111_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+ 	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+#endif
+
 static struct platform_device *au1xxx_platform_devices[] __initdata = {
 	&au1xxx_usb_ohci_device,
+	&au1x00_pcmcia_device,
+#ifdef CONFIG_FB_AU1100
+	&au1100_lcd_device,
+#endif
+#ifdef CONFIG_SOC_AU1200
+#if 0	/* fixme */
+	&au1xxx_usb_ehci_device,
+#endif
+	&au1xxx_usb_gdt_device,
+	&au1xxx_usb_otg_device,
+	&au1200_lcd_device,
+	&au1200_ide0_device,
+	&au1xxx_mmc_device,
+#endif
+#ifdef CONFIG_MIPS_DB1200
+ 	&smc91x_device,
+#endif
 };
 
 int au1xxx_platform_init(void)
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
index c40daccbb5b1..f85093b8d54d 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/au1000/common/power.c
@@ -34,11 +34,13 @@
 #include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/sysctl.h>
+#include <linux/jiffies.h>
 
 #include <asm/string.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/system.h>
+#include <asm/cacheflush.h>
 #include <asm/mach-au1x00/au1000.h>
 
 #ifdef CONFIG_PM
@@ -50,7 +52,7 @@
 #  define DPRINTK(fmt, args...)
 #endif
 
-static void calibrate_delay(void);
+static void au1000_calibrate_delay(void);
 
 extern void set_au1x00_speed(unsigned int new_freq);
 extern unsigned int get_au1x00_speed(void);
@@ -260,7 +262,7 @@ int au_sleep(void)
 }
 
 static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
-		       void *buffer, size_t * len)
+		       void __user *buffer, size_t * len, loff_t *ppos)
 {
 	int retval = 0;
 #ifdef SLEEP_TEST_TIMEOUT
@@ -294,10 +296,9 @@ static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
 }
 
 static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
-			 void *buffer, size_t * len)
+			 void __user *buffer, size_t * len, loff_t *ppos)
 {
 	int retval = 0;
-	void	au1k_wait(void);
 
 	if (!write) {
 		*len = 0;
@@ -306,7 +307,7 @@ static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
 		if (retval)
 			return retval;
 		suspend_mode = 1;
-		au1k_wait();
+
 		retval = pm_send_all(PM_RESUME, (void *) 0);
 	}
 	return retval;
@@ -314,7 +315,7 @@ static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
 
 
 static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
-		      void *buffer, size_t * len)
+		      void __user *buffer, size_t * len, loff_t *ppos)
 {
 	int retval = 0, i;
 	unsigned long val, pll;
@@ -409,14 +410,14 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
 
 
 	/* We don't want _any_ interrupts other than
-	 * match20. Otherwise our calibrate_delay()
+	 * match20. Otherwise our au1000_calibrate_delay()
 	 * calculation will be off, potentially a lot.
 	 */
 	intc0_mask = save_local_and_disable(0);
 	intc1_mask = save_local_and_disable(1);
 	local_enable_irq(AU1000_TOY_MATCH2_INT);
 	spin_unlock_irqrestore(&pm_lock, flags);
-	calibrate_delay();
+	au1000_calibrate_delay();
 	restore_local_and_enable(0, intc0_mask);
 	restore_local_and_enable(1, intc1_mask);
 	return retval;
@@ -456,7 +457,7 @@ __initcall(pm_init);
    better than 1% */
 #define LPS_PREC 8
 
-static void calibrate_delay(void)
+static void au1000_calibrate_delay(void)
 {
 	unsigned long ticks, loopbit;
 	int lps_precision = LPS_PREC;
diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/au1000/common/prom.c
index 22e5a85af4d5..9c171afd9a53 100644
--- a/arch/mips/au1000/common/prom.c
+++ b/arch/mips/au1000/common/prom.c
@@ -75,7 +75,8 @@ void  prom_init_cmdline(void)
 	}
 	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
 		--cp;
-	*cp = '\0';
+	if (prom_argc > 1)
+		*cp = '\0';
 
 }
 
diff --git a/arch/mips/au1000/common/puts.c b/arch/mips/au1000/common/puts.c
index c2ae4624b77b..2705829cd466 100644
--- a/arch/mips/au1000/common/puts.c
+++ b/arch/mips/au1000/common/puts.c
@@ -39,7 +39,6 @@
 #define TIMEOUT       0xffffff
 #define SLOW_DOWN
 
-static const char digits[16] = "0123456789abcdef";
 static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE;
 
 
@@ -54,7 +53,7 @@ static inline void slow_down(void)
 #endif
 
 void
-putch(const unsigned char c)
+prom_putchar(const unsigned char c)
 {
     unsigned char ch;
     int i = 0;
@@ -69,77 +68,3 @@ putch(const unsigned char c)
     } while (0 == (ch & TX_BUSY));
     com1[SER_DATA] = c;
 }
-
-void
-puts(unsigned char *cp)
-{
-    unsigned char ch;
-    int i = 0;
-
-    while (*cp) {
-        do {
-             ch = com1[SER_CMD];
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (0 == (ch & TX_BUSY));
-        com1[SER_DATA] = *cp++;
-    }
-    putch('\r');
-    putch('\n');
-}
-
-void
-fputs(const char *cp)
-{
-    unsigned char ch;
-    int i = 0;
-
-    while (*cp) {
-
-        do {
-             ch = com1[SER_CMD];
-             slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (0 == (ch & TX_BUSY));
-        com1[SER_DATA] = *cp++;
-    }
-}
-
-
-void
-put64(uint64_t ul)
-{
-    int cnt;
-    unsigned ch;
-
-    cnt = 16;            /* 16 nibbles in a 64 bit long */
-    putch('0');
-    putch('x');
-    do {
-        cnt--;
-        ch = (unsigned char)(ul >> cnt * 4) & 0x0F;
-                putch(digits[ch]);
-    } while (cnt > 0);
-}
-
-void
-put32(unsigned u)
-{
-    int cnt;
-    unsigned ch;
-
-    cnt = 8;            /* 8 nibbles in a 32 bit long */
-    putch('0');
-    putch('x');
-    do {
-        cnt--;
-        ch = (unsigned char)(u >> cnt * 4) & 0x0F;
-                putch(digits[ch]);
-    } while (cnt > 0);
-}
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index eff89e109ce6..1ef15d5ef943 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -32,6 +32,7 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 
 #include <asm/cpu.h>
 #include <asm/bootinfo.h>
@@ -57,7 +58,7 @@ extern void au1xxx_time_init(void);
 extern void au1xxx_timer_setup(struct irqaction *irq);
 extern void set_cpuspec(void);
 
-static int __init au1x00_setup(void)
+void __init plat_setup(void)
 {
 	struct	cpu_spec *sp;
 	char *argptr;
@@ -106,8 +107,6 @@ static int __init au1x00_setup(void)
         /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
 #ifdef CONFIG_MIPS_HYDROGEN3
          strcat(argptr, " video=au1100fb:panel:Hydrogen_3_NEC_panel_320x240,nohwcursor");
-#else
-        strcat(argptr, " video=au1100fb:panel:s10,nohwcursor");
 #endif
     }
 #endif
@@ -153,15 +152,11 @@ static int __init au1x00_setup(void)
 	au_sync();
 	while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S);
 	au_writel(0, SYS_TOYTRIM);
-
-	return 0;
 }
 
-early_initcall(au1x00_setup);
-
 #if defined(CONFIG_64BIT_PHYS_ADDR)
 /* This routine should be valid for all Au1x based boards */
-phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 {
 	u32 start, end;
 
@@ -192,4 +187,5 @@ phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 	/* default nop */
 	return phys_addr;
 }
+EXPORT_SYMBOL(__fixup_bigphys_addr);
 #endif
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index 57675b41480e..883d3f3d8c53 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -50,7 +50,6 @@
 #include <linux/mc146818rtc.h>
 #include <linux/timex.h>
 
-extern void startup_match20_interrupt(void);
 extern void do_softirq(void);
 extern volatile unsigned long wall_jiffies;
 unsigned long missed_heart_beats = 0;
@@ -58,14 +57,17 @@ unsigned long missed_heart_beats = 0;
 static unsigned long r4k_offset; /* Amount to increment compare reg each time */
 static unsigned long r4k_cur;    /* What counter should be at next timer irq */
 int	no_au1xxx_32khz;
-void	(*au1k_wait_ptr)(void);
+extern int allow_au1k_wait; /* default off for CP0 Counter */
 
 /* Cycle counter value at the previous timer interrupt.. */
 static unsigned int timerhi = 0, timerlo = 0;
 
 #ifdef CONFIG_PM
-#define MATCH20_INC 328
-extern void startup_match20_interrupt(void);
+#if HZ < 100 || HZ > 1000
+#error "unsupported HZ value! Must be in [100,1000]"
+#endif
+#define MATCH20_INC (328*100/HZ) /* magic number 328 is for HZ=100... */
+extern void startup_match20_interrupt(irqreturn_t (*handler)(int, void *, struct pt_regs *));
 static unsigned long last_pc0, last_match20;
 #endif
 
@@ -117,17 +119,16 @@ null:
 }
 
 #ifdef CONFIG_PM
-void counter0_irq(int irq, void *dev_id, struct pt_regs *regs)
+irqreturn_t counter0_irq(int irq, void *dev_id, struct pt_regs *regs)
 {
 	unsigned long pc0;
 	int time_elapsed;
 	static int jiffie_drift = 0;
 
-	kstat.irqs[0][irq]++;
 	if (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) {
 		/* should never happen! */
-		printk(KERN_WARNING "counter 0 w status eror\n");
-		return;
+		printk(KERN_WARNING "counter 0 w status error\n");
+		return IRQ_NONE;
 	}
 
 	pc0 = au_readl(SYS_TOYREAD);
@@ -164,6 +165,8 @@ void counter0_irq(int irq, void *dev_id, struct pt_regs *regs)
 		update_process_times(user_mode(regs));
 #endif
 	}
+
+	return IRQ_HANDLED;
 }
 
 /* When we wakeup from sleep, we have to "catch up" on all of the
@@ -388,7 +391,6 @@ void au1xxx_timer_setup(struct irqaction *irq)
 {
         unsigned int est_freq;
 	extern unsigned long (*do_gettimeoffset)(void);
-	extern void au1k_wait(void);
 
 	printk("calculating r4koff... ");
 	r4k_offset = cal_r4koff();
@@ -441,18 +443,18 @@ void au1xxx_timer_setup(struct irqaction *irq)
 		au_sync();
 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
 
-		/* setup match20 to interrupt once every 10ms */
+		/* setup match20 to interrupt once every HZ */
 		last_pc0 = last_match20 = au_readl(SYS_TOYREAD);
 		au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
 		au_sync();
 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
-		startup_match20_interrupt();
+		startup_match20_interrupt(counter0_irq);
 
 		do_gettimeoffset = do_fast_pm_gettimeoffset;
 
 		/* We can use the real 'wait' instruction.
 		*/
-		au1k_wait_ptr = au1k_wait;
+		allow_au1k_wait = 1;
 	}
 
 #else
diff --git a/arch/mips/au1000/common/usbdev.c b/arch/mips/au1000/common/usbdev.c
index 447a9a4612a8..0b21bed7ee55 100644
--- a/arch/mips/au1000/common/usbdev.c
+++ b/arch/mips/au1000/common/usbdev.c
@@ -1005,11 +1005,11 @@ process_ep0_receive (struct usb_dev* dev)
 #endif
 		dev->ep0_stage = SETUP_STAGE;
 		break;
-		}
+	}
 
 	spin_unlock(&ep0->lock);
-		// we're done processing the packet, free it
-		kfree(pkt);
+	// we're done processing the packet, free it
+	kfree(pkt);
 }
 
 
@@ -1072,8 +1072,7 @@ dma_done_ep0_intr(int irq, void *dev_id, struct pt_regs *regs)
 			clear_dma_done1(ep0->indma);
 
 		pkt = send_packet_complete(ep0);
-		if (pkt)
-			kfree(pkt);
+		kfree(pkt);
 	}
 
 	/*
@@ -1302,8 +1301,7 @@ usbdev_exit(void)
 		endpoint_flush(ep);
 	}
 
-	if (usbdev.full_conf_desc)
-		kfree(usbdev.full_conf_desc);
+	kfree(usbdev.full_conf_desc);
 }
 
 int
diff --git a/arch/mips/au1000/csb250/init.c b/arch/mips/au1000/csb250/init.c
index bd99733abc0b..a4898b1bc66a 100644
--- a/arch/mips/au1000/csb250/init.c
+++ b/arch/mips/au1000/csb250/init.c
@@ -35,7 +35,6 @@
 #include <asm/bootinfo.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
-#include <linux/sched.h>
 
 int prom_argc;
 char **prom_argv, **prom_envp;
diff --git a/arch/mips/au1000/db1x00/irqmap.c b/arch/mips/au1000/db1x00/irqmap.c
index 8f6ef0dbe1f8..f63024a9893a 100644
--- a/arch/mips/au1000/db1x00/irqmap.c
+++ b/arch/mips/au1000/db1x00/irqmap.c
@@ -48,6 +48,38 @@
 #include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
+#ifdef CONFIG_MIPS_DB1500
+char irq_tab_alchemy[][5] __initdata = {
+ [12] =	{ -1, INTA, INTX, INTX, INTX},   /* IDSEL 12 - HPT371   */
+ [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
+};
+#endif
+
+#ifdef CONFIG_MIPS_BOSPORUS
+char irq_tab_alchemy[][5] __initdata = {
+ [11] =	{ -1, INTA, INTB, INTX, INTX},   /* IDSEL 11 - miniPCI  */
+ [12] =	{ -1, INTA, INTX, INTX, INTX},   /* IDSEL 12 - SN1741   */
+ [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
+};
+#endif
+
+#ifdef CONFIG_MIPS_MIRAGE
+char irq_tab_alchemy[][5] __initdata = {
+ [11] =	{ -1, INTD, INTX, INTX, INTX},   /* IDSEL 11 - SMI VGX */
+ [12] =	{ -1, INTX, INTX, INTC, INTX},   /* IDSEL 12 - PNX1300 */
+ [13] =	{ -1, INTA, INTB, INTX, INTX},   /* IDSEL 13 - miniPCI */
+};
+#endif
+
+#ifdef CONFIG_MIPS_DB1550
+char irq_tab_alchemy[][5] __initdata = {
+ [11] =	{ -1, INTC, INTX, INTX, INTX},   /* IDSEL 11 - on-board HPT371    */
+ [12] =	{ -1, INTB, INTC, INTD, INTA},   /* IDSEL 12 - PCI slot 2 (left)  */
+ [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot 1 (right) */
+};
+#endif
+
+
 au1xxx_irq_map_t au1xxx_irq_map[] = {
 
 #ifndef CONFIG_MIPS_MIRAGE
diff --git a/arch/mips/au1000/db1x00/mirage_ts.c b/arch/mips/au1000/db1x00/mirage_ts.c
index ade35e432004..c29852c24b4f 100644
--- a/arch/mips/au1000/db1x00/mirage_ts.c
+++ b/arch/mips/au1000/db1x00/mirage_ts.c
@@ -102,15 +102,15 @@ static struct {
 } mirage_ts_cal =
 {
 #if 0
-	xscale:   84,
-	xtrans: -157,
-	yscale:   66,
-	ytrans: -150,
+	.xscale   = 84,
+	.xtrans = -157,
+	.yscale   = 66,
+	.ytrans = -150,
 #else
-	xscale:   84,
-	xtrans: -150,
-	yscale:   66,
-	ytrans: -146,
+	.xscale   = 84,
+	.xtrans = -150,
+	.yscale   = 66,
+	.ytrans = -146,
 #endif
 };
 
diff --git a/arch/mips/au1000/hydrogen3/init.c b/arch/mips/au1000/hydrogen3/init.c
index 8cc9879dd582..01ab28483959 100644
--- a/arch/mips/au1000/hydrogen3/init.c
+++ b/arch/mips/au1000/hydrogen3/init.c
@@ -37,7 +37,6 @@
 #include <linux/config.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
-#include <linux/sched.h>
 
 int prom_argc;
 char **prom_argv, **prom_envp;
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c
index 02e7dbcff727..88f2b6d97281 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -33,7 +33,6 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/mm.h>
-#include <linux/sched.h>
 #include <linux/bootmem.h>
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
diff --git a/arch/mips/au1000/mtx-1/irqmap.c b/arch/mips/au1000/mtx-1/irqmap.c
index ddcb9d089dc1..f9a0a8b9def2 100644
--- a/arch/mips/au1000/mtx-1/irqmap.c
+++ b/arch/mips/au1000/mtx-1/irqmap.c
@@ -47,6 +47,17 @@
 #include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
+char irq_tab_alchemy[][5] __initdata = {
+ [0] = { -1, INTA, INTB, INTX, INTX},   /* IDSEL 00 - AdapterA-Slot0 (top)    */
+ [1] = { -1, INTB, INTA, INTX, INTX},   /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+ [2] = { -1, INTC, INTD, INTX, INTX},   /* IDSEL 02 - AdapterB-Slot0 (top)    */
+ [3] = { -1, INTD, INTC, INTX, INTX},   /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+ [4] = { -1, INTA, INTB, INTX, INTX},   /* IDSEL 04 - AdapterC-Slot0 (top)    */
+ [5] = { -1, INTB, INTA, INTX, INTX},   /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+ [6] = { -1, INTC, INTD, INTX, INTX},   /* IDSEL 06 - AdapterD-Slot0 (top)    */
+ [7] = { -1, INTD, INTC, INTX, INTX},   /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+};
+
 au1xxx_irq_map_t au1xxx_irq_map[] = {
        { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
        { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c
index 34713c5df0d7..e9fa1bab81f3 100644
--- a/arch/mips/au1000/pb1000/init.c
+++ b/arch/mips/au1000/pb1000/init.c
@@ -65,5 +65,4 @@ void __init prom_init(void)
 		memsize = simple_strtol(memsize_str, NULL, 0);
 	}
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
-	return 0;
 }
diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/au1000/pb1200/Makefile
new file mode 100644
index 000000000000..22b673cf55af
--- /dev/null
+++ b/arch/mips/au1000/pb1200/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Alchemy Semiconductor PB1200 board.
+#
+
+lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c
new file mode 100644
index 000000000000..a45b17538ac9
--- /dev/null
+++ b/arch/mips/au1000/pb1200/board_setup.c
@@ -0,0 +1,193 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Alchemy Pb1200/Db1200 board setup.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
+#include <linux/ide.h>
+#endif
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+
+#ifdef CONFIG_MIPS_PB1200
+#include <asm/mach-pb1x00/pb1200.h>
+#endif
+
+#ifdef CONFIG_MIPS_DB1200
+#include <asm/mach-db1x00/db1200.h>
+#define PB1200_ETH_INT DB1200_ETH_INT
+#define PB1200_IDE_INT DB1200_IDE_INT
+#endif
+
+extern void _board_init_irq(void);
+extern void	(*board_init_irq)(void);
+
+void board_reset (void)
+{
+	bcsr->resets = 0;
+	bcsr->system = 0;
+}
+
+void __init board_setup(void)
+{
+	char *argptr = NULL;
+	u32 pin_func;
+
+#if 0
+	/* Enable PSC1 SYNC for AC97.  Normaly done in audio driver,
+	 * but it is board specific code, so put it here.
+	 */
+	pin_func = au_readl(SYS_PINFUNC);
+	au_sync();
+	pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
+	au_writel(pin_func, SYS_PINFUNC);
+
+	au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
+	au_sync();
+#endif
+
+#if defined(CONFIG_I2C_AU1550)
+	{
+	u32 freq0, clksrc;
+
+	/* Select SMBUS in CPLD */
+	bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
+
+	pin_func = au_readl(SYS_PINFUNC);
+	au_sync();
+	pin_func &= ~(3<<17 | 1<<4);
+	/* Set GPIOs correctly */
+	pin_func |= 2<<17;
+	au_writel(pin_func, SYS_PINFUNC);
+	au_sync();
+
+	/* The i2c driver depends on 50Mhz clock */
+	freq0 = au_readl(SYS_FREQCTRL0);
+	au_sync();
+	freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
+	freq0 |= (3<<SYS_FC_FRDIV1_BIT);
+	/* 396Mhz / (3+1)*2 == 49.5Mhz */
+	au_writel(freq0, SYS_FREQCTRL0);
+	au_sync();
+	freq0 |= SYS_FC_FE1;
+	au_writel(freq0, SYS_FREQCTRL0);
+	au_sync();
+
+	clksrc = au_readl(SYS_CLKSRC);
+	au_sync();
+	clksrc &= ~0x01f00000;
+	/* bit 22 is EXTCLK0 for PSC0 */
+	clksrc |= (0x3 << 22);
+	au_writel(clksrc, SYS_CLKSRC);
+	au_sync();
+	}
+#endif
+
+#ifdef CONFIG_FB_AU1200
+	argptr = prom_getcmdline();
+#ifdef CONFIG_MIPS_PB1200
+	strcat(argptr, " video=au1200fb:panel:bs");
+#endif
+#ifdef CONFIG_MIPS_DB1200
+	strcat(argptr, " video=au1200fb:panel:bs");
+#endif
+#endif
+
+	/* The Pb1200 development board uses external MUX for PSC0 to
+	support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
+	*/
+#if defined(CONFIG_AU1XXX_PSC_SPI) && defined(CONFIG_I2C_AU1550)
+	#error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\
+			Refer to Pb1200/Db1200 documentation.
+#elif defined( CONFIG_AU1XXX_PSC_SPI )
+	bcsr->resets |= BCSR_RESETS_PCS0MUX;
+	/*Hard Coding Value to enable Temp Sensors [bit 14] Value for SOC Au1200. Pls refer documentation*/
+	  bcsr->resets =0x900f;
+#elif defined( CONFIG_I2C_AU1550 )
+	bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
+#endif
+	au_sync();
+
+#ifdef CONFIG_MIPS_PB1200
+	printk("AMD Alchemy Pb1200 Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1200
+	printk("AMD Alchemy Db1200 Board\n");
+#endif
+
+	/* Setup Pb1200 External Interrupt Controller */
+	{
+		extern void (*board_init_irq)(void);
+		extern void _board_init_irq(void);
+		board_init_irq = _board_init_irq;
+	}
+}
+
+int
+board_au1200fb_panel (void)
+{
+	BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+	int p;
+
+	p = bcsr->switches;
+	p >>= 8;
+	p &= 0x0F;
+	return p;
+}
+
+int
+board_au1200fb_panel_init (void)
+{
+	/* Apply power */
+    BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+	bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
+	/*printk("board_au1200fb_panel_init()\n"); */
+	return 0;
+}
+
+int
+board_au1200fb_panel_shutdown (void)
+{
+	/* Remove power */
+    BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+	bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
+	/*printk("board_au1200fb_panel_shutdown()\n"); */
+	return 0;
+}
+
diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c
new file mode 100644
index 000000000000..27f09e374e15
--- /dev/null
+++ b/arch/mips/au1000/pb1200/init.c
@@ -0,0 +1,69 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	PB1200 board setup
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+extern void  __init prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+	return "Alchemy Pb1200";
+}
+
+void __init prom_init(void)
+{
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
+	prom_argc = (int) fw_arg0;
+	prom_argv = (char **) fw_arg1;
+	prom_envp = (char **) fw_arg2;
+
+	mips_machgroup = MACH_GROUP_ALCHEMY;
+	mips_machtype = MACH_PB1200;
+
+	prom_init_cmdline();
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str) {
+		memsize = 0x08000000;
+	} else {
+		memsize = simple_strtol(memsize_str, NULL, 0);
+	}
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c
new file mode 100644
index 000000000000..59e70e5cf325
--- /dev/null
+++ b/arch/mips/au1000/pb1200/irqmap.c
@@ -0,0 +1,182 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Au1xxx irq map table
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#ifdef CONFIG_MIPS_PB1200
+#include <asm/mach-pb1x00/pb1200.h>
+#endif
+
+#ifdef CONFIG_MIPS_DB1200
+#include <asm/mach-db1x00/db1200.h>
+#define PB1200_INT_BEGIN DB1200_INT_BEGIN
+#define PB1200_INT_END DB1200_INT_END
+#endif
+
+au1xxx_irq_map_t au1xxx_irq_map[] = {
+	{ AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
+};
+
+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+
+/*
+ *	Support for External interrupts on the PbAu1200 Development platform.
+ */
+static volatile int pb1200_cascade_en=0;
+
+irqreturn_t pb1200_cascade_handler( int irq, void *dev_id, struct pt_regs *regs)
+{
+	unsigned short bisr = bcsr->int_status;
+	int extirq_nr = 0;
+
+	/* Clear all the edge interrupts. This has no effect on level */
+	bcsr->int_status = bisr;
+	for( ; bisr; bisr &= (bisr-1) )
+	{
+		extirq_nr = (PB1200_INT_BEGIN-1) + au_ffs(bisr);
+		/* Ack and dispatch IRQ */
+		do_IRQ(extirq_nr,regs);
+	}
+	return IRQ_RETVAL(1);
+}
+
+inline void pb1200_enable_irq(unsigned int irq_nr)
+{
+	bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
+	bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN);
+}
+
+inline void pb1200_disable_irq(unsigned int irq_nr)
+{
+	bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
+	bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
+}
+
+static unsigned int pb1200_startup_irq( unsigned int irq_nr )
+{
+	if (++pb1200_cascade_en == 1)
+	{
+		request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
+			0, "Pb1200 Cascade", (void *)&pb1200_cascade_handler );
+#ifdef CONFIG_MIPS_PB1200
+    /* We have a problem with CPLD rev3. Enable a workaround */
+	if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3)
+	{
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
+		printk("updated to latest revision. This software will not\n");
+		printk("work on anything less than CPLD rev4\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		while(1);
+	}
+#endif
+	}
+	pb1200_enable_irq(irq_nr);
+	return 0;
+}
+
+static void pb1200_shutdown_irq( unsigned int irq_nr )
+{
+	pb1200_disable_irq(irq_nr);
+	if (--pb1200_cascade_en == 0)
+	{
+		free_irq(AU1000_GPIO_7,&pb1200_cascade_handler );
+	}
+	return;
+}
+
+static inline void pb1200_mask_and_ack_irq(unsigned int irq_nr)
+{
+	pb1200_disable_irq( irq_nr );
+}
+
+static void pb1200_end_irq(unsigned int irq_nr)
+{
+	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
+		pb1200_enable_irq(irq_nr);
+	}
+}
+
+static struct hw_interrupt_type external_irq_type =
+{
+#ifdef CONFIG_MIPS_PB1200
+	"Pb1200 Ext",
+#endif
+#ifdef CONFIG_MIPS_DB1200
+	"Db1200 Ext",
+#endif
+	pb1200_startup_irq,
+	pb1200_shutdown_irq,
+	pb1200_enable_irq,
+	pb1200_disable_irq,
+	pb1200_mask_and_ack_irq,
+	pb1200_end_irq,
+	NULL
+};
+
+void _board_init_irq(void)
+{
+	int irq_nr;
+
+	for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++)
+	{
+		irq_desc[irq_nr].handler = &external_irq_type;
+		pb1200_disable_irq(irq_nr);
+	}
+
+	/* GPIO_7 can not be hooked here, so it is hooked upon first
+	request of any source attached to the cascade */
+}
+
diff --git a/arch/mips/au1000/pb1500/irqmap.c b/arch/mips/au1000/pb1500/irqmap.c
index 476e25001681..8cb76c2edb5e 100644
--- a/arch/mips/au1000/pb1500/irqmap.c
+++ b/arch/mips/au1000/pb1500/irqmap.c
@@ -47,6 +47,11 @@
 #include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
+char irq_tab_alchemy[][5] __initdata = {
+ [12] = { -1, INTA, INTX, INTX, INTX},   /* IDSEL 12 - HPT370   */
+ [13] = { -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
+};
+
 au1xxx_irq_map_t au1xxx_irq_map[] = {
 	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
 	{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/au1000/pb1550/irqmap.c b/arch/mips/au1000/pb1550/irqmap.c
index 889d4949ee76..47c7a1c19f4b 100644
--- a/arch/mips/au1000/pb1550/irqmap.c
+++ b/arch/mips/au1000/pb1550/irqmap.c
@@ -47,6 +47,11 @@
 #include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
+char irq_tab_alchemy[][5] __initdata = {
+ [12] =	{ -1, INTB, INTC, INTD, INTA},   /* IDSEL 12 - PCI slot 2 (left)  */
+ [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot 1 (right) */
+};
+
 au1xxx_irq_map_t au1xxx_irq_map[] = {
 	{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
 	{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index efbeac326815..0dc84417bf49 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -33,6 +33,9 @@ vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX)
 $(obj)/elf2ecoff: $(obj)/elf2ecoff.c
 	$(HOSTCC) -o $@ $^
 
+vmlinux.bin: $(VMLINUX)
+	$(OBJCOPY) -O binary $(strip-flags) $(VMLINUX) $(obj)/vmlinux.bin
+
 vmlinux.srec: $(VMLINUX)
 	$(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $(obj)/vmlinux.srec
 
@@ -45,5 +48,6 @@ archhelp:
 
 clean-files += addinitrd \
 	       elf2ecoff \
+	       vmlinux.bin \
 	       vmlinux.ecoff \
 	       vmlinux.srec
diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile
index a5e6554b2326..3b6b7579d1de 100644
--- a/arch/mips/cobalt/Makefile
+++ b/arch/mips/cobalt/Makefile
@@ -2,6 +2,6 @@
 # Makefile for the Cobalt micro systems family specific parts of the kernel
 #
 
-obj-y	 := irq.o int-handler.o reset.o setup.o promcon.o
+obj-y	 := irq.o int-handler.o reset.o setup.o
 
 EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/cobalt/int-handler.S b/arch/mips/cobalt/int-handler.S
index 1a21dec1b3ca..f92608e8d84f 100644
--- a/arch/mips/cobalt/int-handler.S
+++ b/arch/mips/cobalt/int-handler.S
@@ -18,8 +18,8 @@
 		SAVE_ALL
 		CLI
 
-		la	ra, ret_from_irq
-		move	a1, sp
+		PTR_LA	ra, ret_from_irq
+		move	a0, sp
 		j	cobalt_irq
 
 		END(cobalt_handle_int)
diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c
index 6d2a81581397..0d90851f925e 100644
--- a/arch/mips/cobalt/irq.c
+++ b/arch/mips/cobalt/irq.c
@@ -10,6 +10,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
 
 #include <asm/i8259.h>
 #include <asm/irq_cpu.h>
@@ -25,8 +27,8 @@ extern void cobalt_handle_int(void);
  * the CPU interrupt lines, and ones that come in on the via chip. The CPU
  * mappings are:
  *
- *    16,  - Software interrupt 0 (unused)	IE_SW0
- *    17   - Software interrupt 1 (unused)	IE_SW0
+ *    16   - Software interrupt 0 (unused)	IE_SW0
+ *    17   - Software interrupt 1 (unused)	IE_SW1
  *    18   - Galileo chip (timer)		IE_IRQ0
  *    19   - Tulip 0 + NCR SCSI			IE_IRQ1
  *    20   - Tulip 1				IE_IRQ2
@@ -42,61 +44,94 @@ extern void cobalt_handle_int(void);
  *    15  - IDE1
  */
 
-asmlinkage void cobalt_irq(struct pt_regs *regs)
+static inline void galileo_irq(struct pt_regs *regs)
 {
-	unsigned int pending = read_c0_status() & read_c0_cause();
-
-	if (pending & CAUSEF_IP2) {			/* int 18 */
-		unsigned long irq_src = GALILEO_INL(GT_INTRCAUSE_OFS);
-
-		/* Check for timer irq ... */
-		if (irq_src & GALILEO_T0EXP) {
-			/* Clear the int line */
-			GALILEO_OUTL(0, GT_INTRCAUSE_OFS);
-			do_IRQ(COBALT_TIMER_IRQ, regs);
-		}
-		return;
-	}
+	unsigned int mask, pending, devfn;
 
-	if (pending & CAUSEF_IP6) {			/* int 22 */
-		int irq = i8259_irq();
+	mask = GALILEO_INL(GT_INTRMASK_OFS);
+	pending = GALILEO_INL(GT_INTRCAUSE_OFS) & mask;
 
-		if (irq >= 0)
-			do_IRQ(irq, regs);
-		return;
-	}
+	if (pending & GALILEO_INTR_T0EXP) {
 
-	if (pending & CAUSEF_IP3) {			/* int 19 */
-		do_IRQ(COBALT_ETH0_IRQ, regs);
-		return;
-	}
+		GALILEO_OUTL(~GALILEO_INTR_T0EXP, GT_INTRCAUSE_OFS);
+		do_IRQ(COBALT_GALILEO_IRQ, regs);
 
-	if (pending & CAUSEF_IP4) {			/* int 20 */
-		do_IRQ(COBALT_ETH1_IRQ, regs);
-		return;
-	}
+	} else if (pending & GALILEO_INTR_RETRY_CTR) {
 
-	if (pending & CAUSEF_IP5) {			/* int 21 */
-		do_IRQ(COBALT_SERIAL_IRQ, regs);
-		return;
-	}
+		devfn = GALILEO_INL(GT_PCI0_CFGADDR_OFS) >> 8;
+		GALILEO_OUTL(~GALILEO_INTR_RETRY_CTR, GT_INTRCAUSE_OFS);
+		printk(KERN_WARNING "Galileo: PCI retry count exceeded (%02x.%u)\n",
+			PCI_SLOT(devfn), PCI_FUNC(devfn));
+
+	} else {
 
-	if (pending & CAUSEF_IP7) {			/* int 23 */
-		do_IRQ(COBALT_QUBE_SLOT_IRQ, regs);
-		return;
+		GALILEO_OUTL(mask & ~pending, GT_INTRMASK_OFS);
+		printk(KERN_WARNING "Galileo: masking unexpected interrupt %08x\n", pending);
 	}
 }
 
+static inline void via_pic_irq(struct pt_regs *regs)
+{
+	int irq;
+
+	irq = i8259_irq();
+	if (irq >= 0)
+		do_IRQ(irq, regs);
+}
+
+asmlinkage void cobalt_irq(struct pt_regs *regs)
+{
+	unsigned pending;
+
+	pending = read_c0_status() & read_c0_cause();
+
+	if (pending & CAUSEF_IP2)			/* COBALT_GALILEO_IRQ (18) */
+
+		galileo_irq(regs);
+
+	else if (pending & CAUSEF_IP6)			/* COBALT_VIA_IRQ (22) */
+
+		via_pic_irq(regs);
+
+	else if (pending & CAUSEF_IP3)			/* COBALT_ETH0_IRQ (19) */
+
+		do_IRQ(COBALT_CPU_IRQ + 3, regs);
+
+	else if (pending & CAUSEF_IP4)			/* COBALT_ETH1_IRQ (20) */
+
+		do_IRQ(COBALT_CPU_IRQ + 4, regs);
+
+	else if (pending & CAUSEF_IP5)			/* COBALT_SERIAL_IRQ (21) */
+
+		do_IRQ(COBALT_CPU_IRQ + 5, regs);
+
+	else if (pending & CAUSEF_IP7)			/* IRQ 23 */
+
+		do_IRQ(COBALT_CPU_IRQ + 7, regs);
+}
+
+static struct irqaction irq_via = {
+	no_action, 0, { { 0, } }, "cascade", NULL, NULL
+};
+
 void __init arch_init_irq(void)
 {
+	/*
+	 * Mask all Galileo interrupts. The Galileo
+	 * handler is set in cobalt_timer_setup()
+	 */
+	GALILEO_OUTL(0, GT_INTRMASK_OFS);
+
 	set_except_vector(0, cobalt_handle_int);
 
 	init_i8259_irqs();				/*  0 ... 15 */
-	mips_cpu_irq_init(16);				/* 16 ... 23 */
+	mips_cpu_irq_init(COBALT_CPU_IRQ);		/* 16 ... 23 */
 
 	/*
 	 * Mask all cpu interrupts
 	 *  (except IE4, we already masked those at VIA level)
 	 */
 	change_c0_status(ST0_IM, IE_IRQ4);
+
+	setup_irq(COBALT_VIA_IRQ, &irq_via);
 }
diff --git a/arch/mips/cobalt/promcon.c b/arch/mips/cobalt/promcon.c
deleted file mode 100644
index f03df761e9f1..000000000000
--- a/arch/mips/cobalt/promcon.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * PROM console for Cobalt Raq2
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995, 1996, 1997 by Ralf Baechle
- * Copyright (C) 2001 by Liam Davies (ldavies@agile.tv)
- *
- */
-
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/kdev_t.h>
-#include <linux/serial_reg.h>
-
-#include <asm/delay.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-
-static unsigned long port = 0xc800000;
-
-static __inline__ void ns16550_cons_put_char(char ch, unsigned long ioaddr)
-{
-	char lsr;
-
-	do {
-		lsr = inb(ioaddr + UART_LSR);
-	} while ((lsr & (UART_LSR_TEMT | UART_LSR_THRE)) != (UART_LSR_TEMT | UART_LSR_THRE));
-	outb(ch, ioaddr + UART_TX);
-}
-
-static __inline__ char ns16550_cons_get_char(unsigned long ioaddr)
-{
-	while ((inb(ioaddr + UART_LSR) & UART_LSR_DR) == 0)
-		udelay(1);
-	return inb(ioaddr + UART_RX);
-}
-
-void ns16550_console_write(struct console *co, const char *s, unsigned count)
-{
-	char lsr, ier;
-	unsigned i;
-
-	ier = inb(port + UART_IER);
-	outb(0x00, port + UART_IER);
-	for (i=0; i < count; i++, s++) {
-
-		if(*s == '\n')
-			ns16550_cons_put_char('\r', port);
-		ns16550_cons_put_char(*s, port);
-	}
-
-	do {
-		lsr = inb(port + UART_LSR);
-   	} while ((lsr & (UART_LSR_TEMT | UART_LSR_THRE)) != (UART_LSR_TEMT | UART_LSR_THRE));
-
-	outb(ier, port + UART_IER);
-}
-
-char getDebugChar(void)
-{
-	return ns16550_cons_get_char(port);
-}
-
-void putDebugChar(char kgdb_char)
-{
-	ns16550_cons_put_char(kgdb_char, port);
-}
-
-static struct console ns16550_console = {
-    .name	= "prom",
-    .setup	= NULL,
-    .write	= ns16550_console_write,
-    .flags	= CON_PRINTBUFFER,
-    .index	= -1,
-};
-
-static int __init ns16550_setup_console(void)
-{
-	register_console(&ns16550_console);
-
-	return 0;
-}
-
-console_initcall(ns16550_setup_console);
diff --git a/arch/mips/cobalt/reset.c b/arch/mips/cobalt/reset.c
index 084c8e59f42c..805a0e88507b 100644
--- a/arch/mips/cobalt/reset.c
+++ b/arch/mips/cobalt/reset.c
@@ -16,48 +16,45 @@
 #include <asm/reboot.h>
 #include <asm/system.h>
 #include <asm/mipsregs.h>
+#include <asm/cobalt/cobalt.h>
 
-void cobalt_machine_restart(char *command)
+void cobalt_machine_halt(void)
 {
-	*(volatile char *)0xbc000000 = 0x0f;
+	int state, last, diff;
+	unsigned long mark;
 
 	/*
-	 * Ouch, we're still alive ... This time we take the silver bullet ...
-	 * ... and find that we leave the hardware in a state in which the
-	 * kernel in the flush locks up somewhen during of after the PCI
-	 * detection stuff.
+	 * turn off bar on Qube, flash power off LED on RaQ (0.5Hz)
+	 *
+	 * restart if ENTER and SELECT are pressed
 	 */
-	set_c0_status(ST0_BEV | ST0_ERL);
-	change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
-	flush_cache_all();
-	write_c0_wired(0);
-	__asm__ __volatile__(
-		"jr\t%0"
-		:
-		: "r" (0xbfc00000));
-}
 
-extern int led_state;
-#define kLED            0xBC000000
-#define LEDSet(x)       (*(volatile unsigned char *) kLED) = (( unsigned char)x)
+	last = COBALT_KEY_PORT;
 
-void cobalt_machine_halt(void)
-{
-	int mark;
+	for (state = 0;;) {
+
+		state ^= COBALT_LED_POWER_OFF;
+		COBALT_LED_PORT = state;
+
+		diff = COBALT_KEY_PORT ^ last;
+		last ^= diff;
 
-	/* Blink our cute? little LED (number 3)... */
-	while (1) {
-		led_state = led_state | ( 1 << 3 );
-		LEDSet(led_state);
-		mark = jiffies;
-		while (jiffies<(mark+HZ));
-		led_state = led_state & ~( 1 << 3 );
-		LEDSet(led_state);
-		mark = jiffies;
-		while (jiffies<(mark+HZ));
+		if((diff & (COBALT_KEY_ENTER | COBALT_KEY_SELECT)) && !(~last & (COBALT_KEY_ENTER | COBALT_KEY_SELECT)))
+			COBALT_LED_PORT = COBALT_LED_RESET;
+
+		for (mark = jiffies; jiffies - mark < HZ;)
+			;
 	}
 }
 
+void cobalt_machine_restart(char *command)
+{
+	COBALT_LED_PORT = COBALT_LED_RESET;
+
+	/* we should never get here */
+	cobalt_machine_halt();
+}
+
 /*
  * This triggers the luser mode device driver for the power switch ;-)
  */
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index 6b4737e425ed..d358a118fa31 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -13,6 +13,8 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
 
 #include <asm/bootinfo.h>
 #include <asm/time.h>
@@ -21,6 +23,7 @@
 #include <asm/processor.h>
 #include <asm/reboot.h>
 #include <asm/gt64120.h>
+#include <asm/serial.h>
 
 #include <asm/cobalt/cobalt.h>
 
@@ -30,45 +33,44 @@ extern void cobalt_machine_power_off(void);
 
 int cobalt_board_id;
 
-static char my_cmdline[CL_SIZE] = {
- "console=ttyS0,115200 "
-#ifdef CONFIG_IP_PNP
- "ip=on "
-#endif
-#ifdef CONFIG_ROOT_NFS
- "root=/dev/nfs "
-#else
- "root=/dev/hda1 "
-#endif
- };
-
 const char *get_system_type(void)
 {
+	switch (cobalt_board_id) {
+		case COBALT_BRD_ID_QUBE1:
+			return "Cobalt Qube";
+		case COBALT_BRD_ID_RAQ1:
+			return "Cobalt RaQ";
+		case COBALT_BRD_ID_QUBE2:
+			return "Cobalt Qube2";
+		case COBALT_BRD_ID_RAQ2:
+			return "Cobalt RaQ2";
+	}
 	return "MIPS Cobalt";
 }
 
 static void __init cobalt_timer_setup(struct irqaction *irq)
 {
-	/* Load timer value for 150 Hz */
-	GALILEO_OUTL(500000, GT_TC0_OFS);
+	/* Load timer value for 1KHz (TCLK is 50MHz) */
+	GALILEO_OUTL(50*1000*1000 / 1000, GT_TC0_OFS);
 
-	/* Register our timer interrupt */
-	setup_irq(COBALT_TIMER_IRQ, irq);
+	/* Enable timer */
+	GALILEO_OUTL(GALILEO_ENTC0 | GALILEO_SELTC0, GT_TC_CONTROL_OFS);
 
-	/* Enable timer ints */
-	GALILEO_OUTL((GALILEO_ENTC0 | GALILEO_SELTC0), GT_TC_CONTROL_OFS);
-	/* Unmask timer int */
-	GALILEO_OUTL(0x100, GT_INTRMASK_OFS);
+	/* Register interrupt */
+	setup_irq(COBALT_GALILEO_IRQ, irq);
+
+	/* Enable interrupt */
+	GALILEO_OUTL(GALILEO_INTR_T0EXP | GALILEO_INL(GT_INTRMASK_OFS), GT_INTRMASK_OFS);
 }
 
 extern struct pci_ops gt64111_pci_ops;
 
 static struct resource cobalt_mem_resource = {
-	"GT64111 PCI MEM", GT64111_IO_BASE, 0xffffffffUL, IORESOURCE_MEM
+	"PCI memory", GT64111_MEM_BASE, GT64111_MEM_END, IORESOURCE_MEM
 };
 
 static struct resource cobalt_io_resource = {
-	"GT64111 IO MEM", 0x00001000UL, 0x0fffffffUL, IORESOURCE_IO
+	"PCI I/O", 0x1000, 0xffff, IORESOURCE_IO
 };
 
 static struct resource cobalt_io_resources[] = {
@@ -86,11 +88,12 @@ static struct pci_controller cobalt_pci_controller = {
 	.mem_resource	= &cobalt_mem_resource,
 	.mem_offset	= 0,
 	.io_resource	= &cobalt_io_resource,
-	.io_offset	= 0x00001000UL - GT64111_IO_BASE
+	.io_offset	= 0 - GT64111_IO_BASE
 };
 
-static void __init cobalt_setup(void)
+void __init plat_setup(void)
 {
+	static struct uart_port uart;
 	unsigned int devfn = PCI_DEVFN(COBALT_PCICONF_VIA, 0);
 	int i;
 
@@ -100,7 +103,10 @@ static void __init cobalt_setup(void)
 
 	board_timer_setup = cobalt_timer_setup;
 
-        set_io_port_base(KSEG1ADDR(GT64111_IO_BASE));
+        set_io_port_base(CKSEG1ADDR(GT64111_IO_BASE));
+
+	/* I/O port resource must include UART and LCD/buttons */
+	ioport_resource.end = 0x0fffffff;
 
 	/*
 	 * This is a prom style console. We just poke at the
@@ -120,27 +126,61 @@ static void __init cobalt_setup(void)
         cobalt_board_id >>= ((VIA_COBALT_BRD_ID_REG & 3) * 8);
         cobalt_board_id = VIA_COBALT_BRD_REG_to_ID(cobalt_board_id);
 
+	printk("Cobalt board ID: %d\n", cobalt_board_id);
+
 #ifdef CONFIG_PCI
 	register_pci_controller(&cobalt_pci_controller);
 #endif
-}
 
-early_initcall(cobalt_setup);
+#ifdef CONFIG_SERIAL_8250
+	if (cobalt_board_id > COBALT_BRD_ID_RAQ1) {
+
+		uart.line	= 0;
+		uart.type	= PORT_UNKNOWN;
+		uart.uartclk	= 18432000;
+		uart.irq	= COBALT_SERIAL_IRQ;
+		uart.flags	= STD_COM_FLAGS;
+		uart.iobase	= 0xc800000;
+		uart.iotype	= UPIO_PORT;
+
+		early_serial_setup(&uart);
+	}
+#endif
+}
 
 /*
  * Prom init. We read our one and only communication with the firmware.
- * Grab the amount of installed memory
+ * Grab the amount of installed memory.
+ * Better boot loaders (CoLo) pass a command line too :-)
  */
 
 void __init prom_init(void)
 {
-	int argc = fw_arg0;
-
-	strcpy(arcs_cmdline, my_cmdline);
+	int narg, indx, posn, nchr;
+	unsigned long memsz;
+	char **argv;
 
 	mips_machgroup = MACH_GROUP_COBALT;
 
-	add_memory_region(0x0, argc & 0x7fffffff, BOOT_MEM_RAM);
+	memsz = fw_arg0 & 0x7fff0000;
+	narg = fw_arg0 & 0x0000ffff;
+
+	if (narg) {
+		arcs_cmdline[0] = '\0';
+		argv = (char **) fw_arg1;
+		posn = 0;
+		for (indx = 1; indx < narg; ++indx) {
+			nchr = strlen(argv[indx]);
+			if (posn + 1 + nchr + 1 > sizeof(arcs_cmdline))
+				break;
+			if (posn)
+				arcs_cmdline[posn++] = ' ';
+			strcpy(arcs_cmdline + posn, argv[indx]);
+			posn += nchr;
+		}
+	}
+
+	add_memory_region(0x0, memsz, BOOT_MEM_RAM);
 }
 
 unsigned long __init prom_free_prom_memory(void)
diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig
index 3120a02b8670..132ec3dac63f 100644
--- a/arch/mips/configs/atlas_defconfig
+++ b/arch/mips/configs/atlas_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:00 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:13 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,42 +59,72 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 CONFIG_MIPS_ATLAS=y
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_BONITO64=y
 CONFIG_MIPS_MSC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
 CONFIG_MIPS_BOARDS_GEN=y
 CONFIG_MIPS_GT64120=y
 CONFIG_SWAP_IO_SPACE=y
@@ -101,8 +134,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -118,15 +153,46 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_CPU_MIPS64_R1=y
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -135,7 +201,6 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -144,10 +209,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -160,199 +221,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_ISCSI_ATTRS=m
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -361,15 +230,20 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_FWMARK=y
 CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
@@ -387,8 +261,10 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 
 #
 # IP: Virtual Server Configuration
@@ -433,6 +309,9 @@ CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 CONFIG_BRIDGE_NETFILTER=y
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
 
 #
 # IP: Netfilter Configuration
@@ -440,11 +319,15 @@ CONFIG_BRIDGE_NETFILTER=y
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -469,9 +352,12 @@ CONFIG_IP_NF_MATCH_PHYSDEV=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -488,12 +374,14 @@ CONFIG_IP_NF_NAT_IRC=m
 CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -503,7 +391,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -523,8 +411,10 @@ CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_PHYSDEV=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 
 #
@@ -550,8 +440,11 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -579,10 +472,6 @@ CONFIG_IPDDP_DECAP=y
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
@@ -602,6 +491,7 @@ CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_QOS=y
 CONFIG_NET_ESTIMATOR=y
 CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_ROUTE=y
@@ -612,6 +502,7 @@ CONFIG_NET_CLS_IND=y
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
 
@@ -619,17 +510,222 @@ CONFIG_NET_CLS_POLICE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_LBD is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -637,6 +733,21 @@ CONFIG_TUN=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -681,13 +792,17 @@ CONFIG_LAN_SAA9730=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -700,6 +815,8 @@ CONFIG_LAN_SAA9730=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -712,6 +829,8 @@ CONFIG_LAN_SAA9730=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -741,19 +860,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=y
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -766,6 +872,17 @@ CONFIG_MOUSE_SERIAL=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -786,6 +903,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -812,6 +930,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -822,10 +945,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -845,7 +978,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -855,13 +987,9 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -879,10 +1007,15 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -903,12 +1036,14 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_EXPORT=y
+CONFIG_XFS_QUOTA=m
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
 CONFIG_QUOTA=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
@@ -916,6 +1051,7 @@ CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -943,12 +1079,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -974,16 +1108,19 @@ CONFIG_UFS_FS=m
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -992,6 +1129,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1051,7 +1189,9 @@ CONFIG_NLS_UTF8=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -1073,6 +1213,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
@@ -1097,9 +1238,12 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
new file mode 100644
index 000000000000..25e8a08e68be
--- /dev/null
+++ b/arch/mips/configs/bigsur_defconfig
@@ -0,0 +1,881 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:17 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+CONFIG_SIBYTE_BIGSUR=y
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_SIBYTE_BCM1x80=y
+CONFIG_SIBYTE_SB1xxx_SOC=y
+# CONFIG_CPU_SB1_PASS_1 is not set
+# CONFIG_CPU_SB1_PASS_2_1250 is not set
+# CONFIG_CPU_SB1_PASS_2_2 is not set
+# CONFIG_CPU_SB1_PASS_4 is not set
+# CONFIG_CPU_SB1_PASS_2_112x is not set
+# CONFIG_CPU_SB1_PASS_3 is not set
+# CONFIG_SIMULATION is not set
+# CONFIG_CONFIG_SB1_CEX_ALWAYS_FATAL is not set
+# CONFIG_CONFIG_SB1_CERR_STALL is not set
+CONFIG_SIBYTE_CFE=y
+# CONFIG_SIBYTE_CFE_CONSOLE is not set
+# CONFIG_SIBYTE_BUS_WATCHER is not set
+# CONFIG_SIBYTE_SB1250_PROF is not set
+# CONFIG_SIBYTE_TBPROF is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_COHERENT=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+CONFIG_CPU_SB1=y
+CONFIG_SYS_HAS_CPU_SB1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_SIBYTE_DMA_PAGEOPS is not set
+# CONFIG_MIPS_MT is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_LLDSCD=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_DEBUG=y
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_BUILD_ELF64=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_MIPS32_O32=y
+# CONFIG_MIPS32_N32 is not set
+CONFIG_BINFMT_ELF32=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDETAPE=y
+CONFIG_BLK_DEV_IDEFLOPPY=y
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDE_SWARM is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+CONFIG_NET_SB1250_MAC=y
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_STALDRV is not set
+CONFIG_SIBYTE_SB1250_DUART=y
+CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_ALGO_SIBYTE=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+CONFIG_I2C_SIBYTE=y
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_SENSORS_DS1337=y
+CONFIG_SENSORS_DS1374=y
+CONFIG_SENSORS_EEPROM=y
+CONFIG_SENSORS_PCF8574=y
+CONFIG_SENSORS_PCA9539=y
+CONFIG_SENSORS_PCF8591=y
+CONFIG_SENSORS_RTC8564=y
+CONFIG_SENSORS_MAX6875=y
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+CONFIG_I2C_DEBUG_BUS=y
+CONFIG_I2C_DEBUG_CHIP=y
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE=""
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB is not set
+# CONFIG_SB1XXX_CORELIS is not set
+# CONFIG_RUNTIME_DEBUG is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_TEA=m
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index 158e7165f4e3..bfbaa08c47cb 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:00 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:20 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,57 +59,86 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_VICTOR_MPC30X is not set
-CONFIG_ZAO_CAPCELLA=y
-CONFIG_PCI_VR41XX=y
-CONFIG_VRC4173=y
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_TANBAC_TB022X is not set
+# CONFIG_VICTOR_MPC30X is not set
+CONFIG_ZAO_CAPCELLA=y
+CONFIG_PCI_VR41XX=y
+# CONFIG_VRC4173 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 CONFIG_CPU_VR41XX=y
@@ -122,12 +154,36 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -136,7 +192,6 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -145,10 +200,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -161,6 +212,81 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -169,7 +295,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -188,7 +319,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -199,11 +329,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
 
 #
 # IO Schedulers
@@ -244,6 +371,7 @@ CONFIG_IDE_GENERIC=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -254,6 +382,7 @@ CONFIG_IDE_GENERIC=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -266,79 +395,13 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -346,10 +409,25 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_NET_VENDOR_3COM is not set
@@ -359,7 +437,30 @@ CONFIG_NET_ETHERNET=y
 #
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -371,12 +472,17 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -389,6 +495,8 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -400,6 +508,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -419,29 +529,13 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=m
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -451,6 +545,12 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -461,16 +561,16 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -483,19 +583,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Watchdog Cards
 #
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
+# CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -506,9 +594,15 @@ CONFIG_WATCHDOG=y
 # Ftape, the floppy tape device driver
 #
 # CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -519,10 +613,20 @@ CONFIG_WATCHDOG=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -542,7 +646,6 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -552,13 +655,9 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -576,21 +675,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -611,12 +718,10 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -648,6 +753,7 @@ CONFIG_NFSD=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -656,6 +762,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -676,9 +783,11 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=32M console=ttyVR0,38400"
 
 #
 # Security options
@@ -690,7 +799,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -700,7 +833,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 4302c6f914f5..4b4d1ddb3d42 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:00 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:23 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -50,41 +53,69 @@ CONFIG_CC_ALIGN_JUMPS=0
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 CONFIG_MIPS_COBALT=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_GT64111=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -92,8 +123,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -109,14 +142,38 @@ CONFIG_CPU_NEVADA=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -125,7 +182,6 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -134,10 +190,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -150,6 +202,77 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
 # Device Drivers
 #
 
@@ -161,6 +284,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -177,7 +305,6 @@ CONFIG_FW_LOADER=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -189,7 +316,6 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -234,6 +360,7 @@ CONFIG_IDE_GENERIC=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
 
 #
@@ -244,6 +371,7 @@ CONFIG_IDE_GENERIC=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -256,75 +384,13 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -332,6 +398,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -357,12 +438,16 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -375,6 +460,8 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -386,6 +473,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -415,19 +504,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -437,6 +513,17 @@ CONFIG_SERIO_RAW=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -457,6 +544,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -483,6 +571,11 @@ CONFIG_COBALT_LCD=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -493,10 +586,20 @@ CONFIG_COBALT_LCD=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -516,7 +619,6 @@ CONFIG_COBALT_LCD=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -526,13 +628,9 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -550,12 +648,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 CONFIG_FS_MBCACHE=y
@@ -565,10 +668,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -589,12 +694,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -622,7 +725,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -631,6 +734,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -651,7 +755,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -665,7 +771,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -675,7 +805,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index 962fc14b58c2..6501144ec612 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:01 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:26 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,63 +59,79 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+CONFIG_MIPS_DB1000=y
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-CONFIG_SOC_AU1000=y
-# CONFIG_SOC_AU1100 is not set
-# CONFIG_SOC_AU1500 is not set
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-CONFIG_MIPS_DB1000=y
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1000=y
+CONFIG_SOC_AU1X00=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -128,15 +147,39 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 CONFIG_64BIT_PHYS_ADDR=y
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -152,6 +195,8 @@ CONFIG_MMU=y
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 
 #
 # PC-card bridges
@@ -169,6 +214,100 @@ CONFIG_PCMCIA=m
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -179,12 +318,86 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
 #
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
 
 #
 # Parallel port support
@@ -198,14 +411,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -228,6 +439,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -238,6 +450,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -248,94 +461,28 @@ CONFIG_ATA_OVER_ETH=m
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
+# Network device support
 #
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# QoS and/or fair queueing
+# PHY device support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
 
 #
-# Network testing
+# MII PHY device drivers
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -389,6 +536,8 @@ CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -418,18 +567,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -439,6 +576,16 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -473,14 +620,14 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-CONFIG_RTC=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -489,6 +636,10 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -499,10 +650,20 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -522,7 +683,6 @@ CONFIG_SYNCLINK_CS=m
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -532,12 +692,9 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -552,7 +709,10 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
@@ -561,6 +721,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -579,10 +740,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -603,13 +766,10 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -621,6 +781,8 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -641,6 +803,7 @@ CONFIG_NFSD=m
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -650,6 +813,7 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -709,7 +873,9 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -725,26 +891,27 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
@@ -756,9 +923,8 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index 6a528d479d70..b8cd2cd923dd 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:01 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:29 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,63 +59,79 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+CONFIG_MIPS_DB1100=y
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-CONFIG_SOC_AU1100=y
-# CONFIG_SOC_AU1500 is not set
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-CONFIG_MIPS_DB1100=y
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1100=y
+CONFIG_SOC_AU1X00=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -128,15 +147,39 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_MIPS_MT is not set
+CONFIG_64BIT_PHYS_ADDR=y
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -147,15 +190,7 @@ CONFIG_MMU=y
 #
 # PCCARD (PCMCIA/CardBus) support
 #
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-
-#
-# PC-card bridges
-#
-# CONFIG_TCIC is not set
-# CONFIG_PCMCIA_AU1X00 is not set
+# CONFIG_PCCARD is not set
 
 #
 # PCI Hotplug Support
@@ -167,6 +202,100 @@ CONFIG_PCMCIA=m
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -180,9 +309,83 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
 # Memory Technology Devices (MTD)
 #
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
 
 #
 # Parallel port support
@@ -196,14 +399,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -226,6 +427,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -236,6 +438,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -246,101 +449,35 @@ CONFIG_ATA_OVER_ETH=m
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
+# Network device support
 #
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# QoS and/or fair queueing
+# PHY device support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
 
 #
-# Network testing
+# MII PHY device drivers
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
-# CONFIG_MIPS_AU1X00_ENET is not set
+CONFIG_MIPS_AU1X00_ENET=y
 
 #
 # Ethernet (1000 Mbit)
@@ -360,19 +497,6 @@ CONFIG_MII=m
 # CONFIG_NET_RADIO is not set
 
 #
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-
-#
 # Wan interfaces
 #
 # CONFIG_WAN is not set
@@ -387,6 +511,8 @@ CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -416,18 +542,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_LIBPS2=m
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -437,6 +551,16 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=m
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -454,7 +578,10 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_AU1X00 is not set
+CONFIG_SERIAL_AU1X00=y
+CONFIG_SERIAL_AU1X00_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -468,20 +595,19 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-CONFIG_RTC=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
 
 #
-# PCMCIA character devices
+# TPM devices
 #
-CONFIG_SYNCLINK_CS=m
-# CONFIG_RAW_DRIVER is not set
 
 #
 # I2C support
@@ -494,10 +620,20 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -510,13 +646,43 @@ CONFIG_SYNCLINK_CS=m
 #
 # Graphics support
 #
-# CONFIG_FB is not set
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_AU1100=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -527,12 +693,9 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -547,7 +710,10 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
@@ -556,6 +722,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -574,10 +741,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -598,13 +767,10 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -616,6 +782,8 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -636,6 +804,7 @@ CONFIG_NFSD=m
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -645,6 +814,7 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -704,7 +874,9 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -720,26 +892,27 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
@@ -751,9 +924,8 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
new file mode 100644
index 000000000000..530b6c2d99f6
--- /dev/null
+++ b/arch/mips/configs/db1200_defconfig
@@ -0,0 +1,987 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:32 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+CONFIG_MIPS_DB1200=y
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_COHERENT=y
+CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1200=y
+CONFIG_SOC_AU1X00=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
+CONFIG_64BIT_PHYS_ADDR=y
+# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_AU1X00=m
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_AU1550 is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDE_AU1XXX=y
+CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA=y
+# CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is not set
+# CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON is not set
+CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_MIPS_AU1X00_ENET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_AU1X00_GPIO is not set
+# CONFIG_TS_AU1X00_ADS7846 is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AU1X00=y
+CONFIG_SERIAL_AU1X00_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_AU1200=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_AU1X=y
+
+#
+# InfiniBand support
+#
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+CONFIG_JFS_FS=y
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=m
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE="mem=48M"
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index fed6f2fab48b..1c2784dee697 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:01 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:36 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,63 +59,81 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+CONFIG_MIPS_DB1500=y
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-# CONFIG_SOC_AU1100 is not set
-CONFIG_SOC_AU1500=y
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-CONFIG_MIPS_DB1500=y
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_COHERENT=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1500=y
+CONFIG_SOC_AU1X00=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -128,15 +149,39 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 CONFIG_64BIT_PHYS_ADDR=y
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -145,7 +190,6 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -154,6 +198,8 @@ CONFIG_MMU=y
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -176,6 +222,100 @@ CONFIG_PCMCIA_AU1X00=m
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -186,15 +326,20 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 
@@ -232,16 +377,14 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_DB1X00=y
-CONFIG_MTD_DB1X00_BOOT=y
-CONFIG_MTD_DB1X00_USER=y
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -277,7 +420,6 @@ CONFIG_MTD_DB1X00_USER=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -290,7 +432,6 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -336,6 +477,7 @@ CONFIG_BLK_DEV_IDECS=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -346,6 +488,7 @@ CONFIG_BLK_DEV_IDECS=m
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -358,94 +501,13 @@ CONFIG_BLK_DEV_IDECS=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
+# Network device support
 #
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -453,6 +515,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -479,12 +556,16 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -497,6 +578,8 @@ CONFIG_MIPS_AU1X00_ENET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # PCMCIA network device support
@@ -520,6 +603,8 @@ CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -549,19 +634,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -571,6 +643,17 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 # CONFIG_VT is not set
@@ -590,6 +673,7 @@ CONFIG_SERIAL_AU1X00=y
 CONFIG_SERIAL_AU1X00_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -603,7 +687,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-CONFIG_RTC=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -620,6 +705,11 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -630,10 +720,20 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -647,7 +747,6 @@ CONFIG_SYNCLINK_CS=m
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -680,7 +779,6 @@ CONFIG_SOUND_AU1000=y
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
 # CONFIG_SOUND_VIA82CXXX is not set
-# CONFIG_SOUND_OSS is not set
 # CONFIG_SOUND_ALI5455 is not set
 # CONFIG_SOUND_FORTE is not set
 # CONFIG_SOUND_RME96XX is not set
@@ -689,6 +787,8 @@ CONFIG_SOUND_AU1000=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -699,23 +799,23 @@ CONFIG_USB=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
@@ -733,12 +833,17 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+CONFIG_USB_YEALINK=m
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -762,6 +867,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -786,9 +892,10 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_LD=m
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -807,12 +914,17 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -831,10 +943,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -855,13 +969,10 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -895,6 +1006,7 @@ CONFIG_NFSD=m
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -904,6 +1016,7 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -963,7 +1076,9 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -979,26 +1094,27 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
@@ -1010,9 +1126,8 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index 178c0ad1af75..64248e2e924a 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:02 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:39 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,63 +59,80 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+CONFIG_MIPS_DB1550=y
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-# CONFIG_SOC_AU1100 is not set
-# CONFIG_SOC_AU1500 is not set
-CONFIG_SOC_AU1550=y
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-CONFIG_MIPS_DB1550=y
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_COHERENT=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1550=y
+CONFIG_SOC_AU1X00=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -128,15 +148,39 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 CONFIG_64BIT_PHYS_ADDR=y
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -145,7 +189,6 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -154,6 +197,8 @@ CONFIG_MMU=y
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -176,6 +221,100 @@ CONFIG_PCMCIA_AU1X00=m
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -186,15 +325,20 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 
@@ -238,9 +382,8 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_DB1550=y
-CONFIG_MTD_DB1550_BOOT=y
-CONFIG_MTD_DB1550_USER=y
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -281,7 +424,6 @@ CONFIG_MTD_NAND_AU1550=m
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -293,7 +435,6 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -350,6 +491,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -367,6 +509,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -377,6 +520,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -389,94 +533,13 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
+# Network device support
 #
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -484,6 +547,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -510,12 +588,16 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -528,6 +610,8 @@ CONFIG_MIPS_AU1X00_ENET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # PCMCIA network device support
@@ -559,6 +643,8 @@ CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -588,19 +674,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -610,6 +683,17 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 # CONFIG_VT is not set
@@ -629,6 +713,7 @@ CONFIG_SERIAL_AU1X00=y
 CONFIG_SERIAL_AU1X00_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -660,6 +745,11 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -670,10 +760,20 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -687,7 +787,6 @@ CONFIG_SYNCLINK_CS=m
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -697,13 +796,9 @@ CONFIG_SYNCLINK_CS=m
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -721,12 +816,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -745,10 +845,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -769,13 +871,10 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -809,6 +908,7 @@ CONFIG_NFSD=m
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -818,6 +918,7 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -877,7 +978,9 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -893,26 +996,27 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
@@ -924,9 +1028,8 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ddb5476_defconfig b/arch/mips/configs/ddb5476_defconfig
index 70addc73f699..b260e51eb517 100644
--- a/arch/mips/configs/ddb5476_defconfig
+++ b/arch/mips/configs/ddb5476_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:02 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:42 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -50,41 +53,69 @@ CONFIG_CC_ALIGN_JUMPS=0
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 CONFIG_DDB5476=y
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_DDB5XXX_COMMON=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -93,8 +124,10 @@ CONFIG_HAVE_STD_PC_SERIAL_PORT=y
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -110,14 +143,38 @@ CONFIG_CPU_R5432=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5432=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -126,7 +183,6 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_ISA=y
 CONFIG_MMU=y
 
@@ -136,11 +192,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-CONFIG_PCMCIA_PROBE=y
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -153,6 +204,80 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
 # Device Drivers
 #
 
@@ -161,7 +286,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
 
 #
 # Memory Technology Devices (MTD)
@@ -181,8 +311,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -193,7 +321,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -239,6 +366,7 @@ CONFIG_IDE_GENERIC=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
 
 #
@@ -254,6 +382,7 @@ CONFIG_IDE_GENERIC=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -266,78 +395,13 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -345,6 +409,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -352,7 +431,6 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 
@@ -377,12 +455,16 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -395,6 +477,8 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -406,6 +490,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -435,19 +521,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -457,6 +530,17 @@ CONFIG_SERIO_RAW=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -477,6 +561,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -503,6 +588,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -513,10 +603,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -530,6 +630,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Graphics support
 #
 CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -537,6 +642,7 @@ CONFIG_FB=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_RADEON_OLD is not set
@@ -549,8 +655,11 @@ CONFIG_FB=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_E1356 is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -575,13 +684,9 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -599,21 +704,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -634,12 +747,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -668,7 +779,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -677,6 +788,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -697,7 +809,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="ip=any"
 
@@ -711,7 +825,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -721,7 +859,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig
index 60292808b384..c2a01df3c8df 100644
--- a/arch/mips/configs/ddb5477_defconfig
+++ b/arch/mips/configs/ddb5477_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:02 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:45 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -50,42 +53,70 @@ CONFIG_CC_ALIGN_JUMPS=0
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 CONFIG_DDB5477=y
-CONFIG_DDB5477_BUS_FREQUENCY=0
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_DDB5477_BUS_FREQUENCY=0
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_DDB5XXX_COMMON=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -93,8 +124,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -110,14 +143,38 @@ CONFIG_CPU_R5432=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5432=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -126,7 +183,6 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -135,10 +191,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -151,6 +203,80 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
 # Device Drivers
 #
 
@@ -159,7 +285,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
 
 #
 # Memory Technology Devices (MTD)
@@ -178,7 +309,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -189,7 +319,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -212,6 +341,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
 
 #
@@ -222,6 +352,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -234,78 +365,13 @@ CONFIG_ATA_OVER_ETH=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
+# Network device support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -313,6 +379,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -357,13 +438,17 @@ CONFIG_PCNET32=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -376,6 +461,8 @@ CONFIG_PCNET32=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -387,6 +474,8 @@ CONFIG_PCNET32=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -416,19 +505,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -438,6 +514,17 @@ CONFIG_SERIO_RAW=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -458,6 +545,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -484,6 +572,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -494,10 +587,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -517,7 +620,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -527,13 +629,9 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -551,21 +649,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -586,12 +692,10 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -623,6 +727,7 @@ CONFIG_NFSD=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -631,6 +736,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -651,7 +757,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="ip=any"
 
@@ -665,7 +773,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -675,7 +807,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index 66ec1f41d122..5bc885b72d14 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:03 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:48 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,30 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +44,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -49,48 +53,76 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
+# CONFIG_MODVERSIONS is not set
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 CONFIG_MACH_DECSTATION=y
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=4
@@ -98,8 +130,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=4
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 CONFIG_CPU_R3000=y
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -115,12 +149,37 @@ CONFIG_CPU_R3000=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R3000=y
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_WB=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -135,10 +194,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 
@@ -150,6 +205,80 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -159,6 +288,12 @@ CONFIG_TRAD_SIGNALS=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -177,17 +312,14 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
 
 #
 # IO Schedulers
@@ -196,7 +328,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -206,6 +338,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -213,10 +346,12 @@ CONFIG_SCSI_PROC_FS=y
 # SCSI support type (disk, tape, CD-ROM)
 #
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
+CONFIG_CHR_DEV_ST=m
 # CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -228,9 +363,10 @@ CONFIG_SCSI_CONSTANTS=y
 #
 # SCSI Transport Attributes
 #
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=m
 
 #
 # SCSI low-level drivers
@@ -248,6 +384,7 @@ CONFIG_SCSI_DECNCR=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -258,78 +395,28 @@ CONFIG_SCSI_DECNCR=y
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# QoS and/or fair queueing
+# PHY device support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
 
 #
-# Network testing
+# MII PHY device drivers
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -363,6 +450,8 @@ CONFIG_DECLANCE=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -377,48 +466,22 @@ CONFIG_DECLANCE=y
 #
 # Input device support
 #
-CONFIG_INPUT=y
+# CONFIG_INPUT is not set
 
 #
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
+# Hardware I/O ports
 #
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
 
 #
 # Character devices
 #
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
+# CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_SERIAL_DEC=y
+CONFIG_SERIAL_DEC_CONSOLE=y
+CONFIG_ZS=y
 
 #
 # Serial drivers
@@ -445,18 +508,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
+CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -467,10 +532,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -483,13 +558,29 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Graphics support
 #
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_PMAG_AA is not set
+CONFIG_FB_PMAG_BA=y
+CONFIG_FB_PMAGB_B=y
+# CONFIG_FB_MAXINE is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_DEC_CLUT224=y
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -504,10 +595,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -520,7 +607,10 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
@@ -529,6 +619,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 CONFIG_FS_MBCACHE=y
@@ -538,10 +629,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -562,12 +655,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -584,19 +675,31 @@ CONFIG_RAMFS=y
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+CONFIG_UFS_FS=y
+CONFIG_UFS_FS_WRITE=y
 
 #
 # Network File Systems
 #
-# CONFIG_NFS_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
-# CONFIG_EXPORTFS is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -631,9 +734,24 @@ CONFIG_ULTRIX_PARTITION=y
 #
 # Kernel hacking
 #
-# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB is not set
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_MIPS_UNCACHED is not set
 
 #
 # Security options
@@ -645,7 +763,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -655,7 +797,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index ba2ec01defb1..c0d06ea5566c 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:03 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:51 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,56 +59,84 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-CONFIG_CASIO_E55=y
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-# CONFIG_VRC4171 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+CONFIG_CASIO_E55=y
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_TANBAC_TB022X is not set
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 CONFIG_CPU_VR41XX=y
@@ -121,12 +152,36 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -141,11 +196,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-CONFIG_PCMCIA_PROBE=y
-
-#
 # PCI Hotplug Support
 #
 
@@ -157,6 +207,78 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -168,6 +290,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -185,18 +312,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
 
 #
 # IO Schedulers
@@ -205,7 +327,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -237,6 +359,7 @@ CONFIG_IDE_GENERIC=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -252,6 +375,7 @@ CONFIG_IDE_GENERIC=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -262,76 +386,13 @@ CONFIG_IDE_GENERIC=y
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -339,12 +400,26 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 # CONFIG_AT1700 is not set
@@ -380,6 +455,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -401,26 +478,14 @@ CONFIG_INPUT=y
 #
 CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -430,6 +495,16 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -440,16 +515,15 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -484,10 +558,14 @@ CONFIG_WATCHDOG=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -498,10 +576,20 @@ CONFIG_WATCHDOG=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -522,7 +610,6 @@ CONFIG_WATCHDOG=y
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -536,10 +623,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -552,24 +635,31 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -590,12 +680,10 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -617,16 +705,17 @@ CONFIG_RAMFS=y
 #
 # Network File Systems
 #
-CONFIG_NFS_FS=y
+CONFIG_NFS_FS=m
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
+CONFIG_NFSD=m
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
+CONFIG_LOCKD=m
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -634,6 +723,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -654,9 +744,11 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="console=ttyVR0,19200 mem=8M"
 
 #
 # Security options
@@ -668,7 +760,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -678,7 +794,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
 CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ev64120_defconfig b/arch/mips/configs/ev64120_defconfig
index 17e87f70f602..f1309d84d2fe 100644
--- a/arch/mips/configs/ev64120_defconfig
+++ b/arch/mips/configs/ev64120_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:03 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:54 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,41 +59,69 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 CONFIG_MIPS_EV64120=y
-# CONFIG_EVB_PCI1 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_EVB_PCI1 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_MIPS_GT64120=y
 # CONFIG_SYSCLK_75 is not set
 # CONFIG_SYSCLK_83 is not set
@@ -100,8 +131,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -117,15 +150,39 @@ CONFIG_CPU_R5000=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -134,7 +191,6 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -143,10 +199,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -159,6 +211,79 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -167,7 +292,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -186,7 +316,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -197,7 +326,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -220,6 +348,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -230,6 +359,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -242,77 +372,13 @@ CONFIG_ATA_OVER_ETH=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -320,6 +386,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -345,12 +426,16 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -363,6 +448,8 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -381,6 +468,8 @@ CONFIG_PPP_ASYNC=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -410,19 +499,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -432,6 +508,17 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -452,6 +539,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -478,6 +566,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -488,10 +581,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -511,7 +614,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -521,13 +623,9 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -545,21 +643,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -580,12 +686,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -614,7 +718,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -623,6 +727,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -643,7 +748,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw nfsroot=192.168.1.1:/mnt/disk2/fs.gal ip=192.168.1.211:192.168.1.1:::gt::"
 
@@ -657,7 +764,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -667,7 +798,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
 CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ev96100_defconfig b/arch/mips/configs/ev96100_defconfig
index 9da4140eae00..8ac55b7acc01 100644
--- a/arch/mips/configs/ev96100_defconfig
+++ b/arch/mips/configs/ev96100_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:03 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:57 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,40 +59,68 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 CONFIG_MIPS_EV96100=y
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_GT64120=y
 CONFIG_SWAP_IO_SPACE=y
@@ -99,8 +130,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -116,6 +149,18 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_CPU_RM7000=y
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -123,11 +168,25 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -143,10 +202,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 
@@ -158,6 +213,79 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -169,6 +297,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -185,13 +318,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -214,6 +345,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -224,6 +356,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -234,77 +367,28 @@ CONFIG_ATA_OVER_ETH=m
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
+# Network device support
 #
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# QoS and/or fair queueing
+# PHY device support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
 
 #
-# Network testing
+# MII PHY device drivers
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -338,6 +422,8 @@ CONFIG_MIPS_GT96100ETH=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -367,18 +453,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -388,6 +462,16 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -429,10 +513,13 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -443,10 +530,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -466,7 +563,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -480,10 +576,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -496,24 +588,31 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -534,12 +633,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -568,7 +665,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -577,6 +674,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -597,7 +695,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -611,7 +711,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -621,7 +745,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
 CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index 17fa5c4e3ad1..3ae3838f283c 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:04 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:01 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,25 +11,30 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -42,6 +44,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -57,41 +60,69 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 CONFIG_SGI_IP22=y
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_ARC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_ARC32=y
@@ -103,8 +134,10 @@ CONFIG_ARC_PROMLIB=y
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -120,22 +153,48 @@ CONFIG_CPU_R5000=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_BOARD_SCACHE=y
 CONFIG_IP22_CPU_SCACHE=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
+CONFIG_HW_HAS_EISA=y
 # CONFIG_EISA is not set
 CONFIG_MMU=y
 
@@ -145,10 +204,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 
@@ -160,115 +215,7 @@ CONFIG_BINFMT_MISC=m
 CONFIG_TRAD_SIGNALS=y
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-CONFIG_SGIWD93_SCSI=y
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -277,12 +224,14 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 # CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
@@ -296,8 +245,10 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 
 #
 # IP: Virtual Server Configuration
@@ -341,6 +292,9 @@ CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
 
 #
 # IP: Netfilter Configuration
@@ -348,11 +302,15 @@ CONFIG_NETFILTER=y
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
 # CONFIG_IP_NF_CT_PROTO_SCTP is not set
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -376,9 +334,12 @@ CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -395,12 +356,14 @@ CONFIG_IP_NF_NAT_IRC=m
 CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -410,7 +373,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -429,11 +392,16 @@ CONFIG_IP6_NF_MATCH_LENGTH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -456,10 +424,6 @@ CONFIG_SCTP_HMAC_MD5=y
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_CLK_JIFFIES is not set
 CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
@@ -479,6 +443,7 @@ CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_QOS=y
 CONFIG_NET_ESTIMATOR=y
 CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_ROUTE=y
@@ -489,6 +454,7 @@ CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
 
@@ -496,17 +462,153 @@ CONFIG_NET_CLS_POLICE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_LBD is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+
+#
+# SCSI low-level drivers
+#
+CONFIG_SGIWD93_SCSI=y
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-CONFIG_ETHERTAP=m
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -540,6 +642,8 @@ CONFIG_SGISEEQ=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -569,18 +673,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -598,6 +690,16 @@ CONFIG_MOUSE_SERIAL=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -644,11 +746,14 @@ CONFIG_SGI_DS1286=m
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_MAX_RAW_DEVS=256
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -659,10 +764,20 @@ CONFIG_MAX_RAW_DEVS=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -693,7 +808,6 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_SGI_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -707,10 +821,6 @@ CONFIG_LOGO_SGI_CLUT224=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -723,13 +833,17 @@ CONFIG_LOGO_SGI_CLUT224=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=m
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -741,12 +855,14 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_EXPORT=y
+CONFIG_XFS_QUOTA=m
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 CONFIG_MINIX_FS=m
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 CONFIG_QUOTA=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=m
@@ -754,6 +870,7 @@ CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -781,12 +898,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -811,15 +926,20 @@ CONFIG_UFS_FS=m
 #
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
@@ -835,6 +955,7 @@ CONFIG_CIFS=m
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -908,7 +1029,9 @@ CONFIG_NLS_UTF8=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -931,6 +1054,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
@@ -942,10 +1066,10 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -955,9 +1079,12 @@ CONFIG_CRYPTO_TEST=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
 CONFIG_CRC32=m
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index b2a67da1e031..d962f61d5b98 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -1,11 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:04 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:04 2005
 #
 CONFIG_MIPS=y
-CONFIG_64BIT=y
-CONFIG_64BIT=y
 
 #
 # Code maturity level options
@@ -13,25 +11,31 @@ CONFIG_64BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_CPUSETS=y
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +45,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -57,55 +62,85 @@ CONFIG_STOP_MACHINE=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 CONFIG_SGI_IP27=y
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 # CONFIG_SGI_SN0_N_MODE is not set
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_NUMA=y
 # CONFIG_MAPPED_KERNEL is not set
 # CONFIG_REPLICATE_KTEXT is not set
 # CONFIG_REPLICATE_EXHANDLERS is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
-# CONFIG_SNI_RM200_PCI is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_ARC=y
 CONFIG_DMA_IP27=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_MIPS_L1_CACHE_SHIFT=7
 CONFIG_ARC64=y
 CONFIG_BOOT_ELF64=y
-CONFIG_QL_ISP_A64=y
 
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -121,17 +156,42 @@ CONFIG_CPU_R10000=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R10000=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SMP=y
 CONFIG_NR_CPUS=64
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
 # CONFIG_MIPS_INSANE_LARGE is not set
 
 #
@@ -141,7 +201,6 @@ CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -150,10 +209,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -163,7 +218,7 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
+CONFIG_BUILD_ELF64=y
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_MIPS32_O32=y
@@ -171,6 +226,111 @@ CONFIG_MIPS32_O32=y
 CONFIG_BINFMT_ELF32=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+# CONFIG_NET_SCH_CLK_JIFFIES is not set
+CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -179,7 +339,12 @@ CONFIG_BINFMT_ELF32=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -198,7 +363,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -210,7 +374,6 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -232,6 +395,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -241,8 +405,10 @@ CONFIG_SCSI_PROC_FS=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 # CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -256,7 +422,8 @@ CONFIG_SCSI_LOGGING=y
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
 
 #
 # SCSI low-level drivers
@@ -271,26 +438,24 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-CONFIG_SCSI_QLOGIC_ISP=y
 # CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_QLOGIC_1280_1040=y
 CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA21XX is not set
 # CONFIG_SCSI_QLA22XX is not set
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -313,11 +478,15 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
 
 #
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -330,107 +499,13 @@ CONFIG_DM_ZERO=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-# CONFIG_NET_SCH_CLK_JIFFIES is not set
-CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -438,13 +513,25 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-CONFIG_SGI_IOC3_ETH=y
-CONFIG_SGI_IOC3_ETH_HW_RX_CSUM=y
-CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_NET_VENDOR_3COM is not set
@@ -466,12 +553,16 @@ CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -484,6 +575,8 @@ CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -496,6 +589,8 @@ CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -513,25 +608,15 @@ CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
 # CONFIG_INPUT is not set
 
 #
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
+# Hardware I/O ports
 #
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
 # CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_LIBPS2=m
 CONFIG_SERIO_RAW=m
-
-#
-# Input Device Drivers
-#
+# CONFIG_GAMEPORT is not set
 
 #
 # Character devices
@@ -549,7 +634,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -557,6 +641,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -584,6 +669,11 @@ CONFIG_SGI_IP27_RTC=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -594,10 +684,20 @@ CONFIG_SGI_IP27_RTC=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -611,7 +711,6 @@ CONFIG_SGI_IP27_RTC=y
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -621,13 +720,9 @@ CONFIG_SGI_IP27_RTC=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -645,12 +740,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -662,17 +762,19 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_QUOTA=m
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -693,12 +795,10 @@ CONFIG_AUTOFS_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -722,13 +822,14 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 # CONFIG_ROOT_NFS is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
@@ -738,6 +839,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -772,7 +874,9 @@ CONFIG_SGI_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=15
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -788,28 +892,29 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -819,9 +924,8 @@ CONFIG_CRYPTO_TEST=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index b26e1173365d..bf8fb95b21dc 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -1,11 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:04 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:07 2005
 #
 CONFIG_MIPS=y
-CONFIG_64BIT=y
-CONFIG_64BIT=y
 
 #
 # Code maturity level options
@@ -13,11 +11,13 @@ CONFIG_64BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -25,13 +25,16 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +44,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -50,42 +54,71 @@ CONFIG_CC_ALIGN_JUMPS=0
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 CONFIG_SGI_IP32=y
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_ARC=y
 CONFIG_DMA_IP32=y
-CONFIG_OWN_DMA=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_OWN_DMA=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_ARC32=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -95,8 +128,10 @@ CONFIG_ARC_PROMLIB=y
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -112,6 +147,17 @@ CONFIG_CPU_R5000=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -119,9 +165,22 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_R5000_CPU_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
+# CONFIG_MIPS_MT is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 
 #
@@ -130,7 +189,6 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -139,10 +197,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -160,6 +214,80 @@ CONFIG_MIPS32_O32=y
 CONFIG_BINFMT_ELF32=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
 # Device Drivers
 #
 
@@ -168,7 +296,12 @@ CONFIG_BINFMT_ELF32=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
 
 #
 # Memory Technology Devices (MTD)
@@ -187,7 +320,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -199,7 +331,6 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -221,6 +352,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -233,6 +365,7 @@ CONFIG_CHR_DEV_OSST=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -244,9 +377,10 @@ CONFIG_SCSI_LOGGING=y
 #
 # SCSI Transport Attributes
 #
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
 
 #
 # SCSI low-level drivers
@@ -266,18 +400,13 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -286,6 +415,8 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -299,6 +430,8 @@ CONFIG_SCSI_QLA2XXX=y
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -311,78 +444,13 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -390,6 +458,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -416,12 +499,16 @@ CONFIG_SGI_O2MACE_ETH=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -434,6 +521,8 @@ CONFIG_SGI_O2MACE_ETH=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -446,6 +535,8 @@ CONFIG_SGI_O2MACE_ETH=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -475,27 +566,25 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
 #
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
 # CONFIG_SERIO_PCIPS2 is not set
 # CONFIG_SERIO_MACEPS2 is not set
 # CONFIG_SERIO_LIBPS2 is not set
 CONFIG_SERIO_RAW=y
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_GAMEPORT is not set
 
 #
 # Character devices
@@ -518,6 +607,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -544,6 +634,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -554,10 +649,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -577,7 +682,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -587,13 +691,9 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -611,21 +711,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -646,13 +754,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -676,13 +781,14 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -691,6 +797,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -721,7 +828,9 @@ CONFIG_SGI_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -735,7 +844,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -745,7 +878,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/it8172_defconfig b/arch/mips/configs/it8172_defconfig
index 08bd3ad64761..0940771bafb1 100644
--- a/arch/mips/configs/it8172_defconfig
+++ b/arch/mips/configs/it8172_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:05 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:09 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,11 +11,13 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -26,13 +25,16 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -42,6 +44,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -57,41 +60,69 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 CONFIG_MIPS_ITE8172=y
-# CONFIG_IT8172_REVC is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_IT8172_REVC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_ITE_BOARD_GEN=y
 CONFIG_IT8172_CIR=y
 CONFIG_IT8712=y
@@ -100,8 +131,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -117,14 +150,39 @@ CONFIG_CPU_NEVADA=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5432=y
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -140,10 +198,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 
@@ -155,6 +209,80 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -166,12 +294,17 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_PARTITIONS is not set
 # CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
 
 #
 # User Modules And Translation Layers
@@ -207,7 +340,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
@@ -217,6 +349,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x8000000
 CONFIG_MTD_PHYSMAP_LEN=0x2000000
 CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -251,14 +384,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -302,6 +433,7 @@ CONFIG_IDE_GENERIC=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -312,6 +444,7 @@ CONFIG_IDE_GENERIC=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -322,78 +455,28 @@ CONFIG_IDE_GENERIC=y
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
+# Network device support
 #
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# PHY device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
 
 #
-# QoS and/or fair queueing
+# MII PHY device drivers
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -426,6 +509,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -455,18 +540,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -476,6 +549,16 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -521,10 +604,13 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -535,10 +621,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -558,7 +654,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -574,15 +669,9 @@ CONFIG_SOUND=y
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_SONICVIBES is not set
 CONFIG_SOUND_IT8172=y
-# CONFIG_SOUND_TRIDENT is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
 # CONFIG_SOUND_AD1980 is not set
 
 #
@@ -592,10 +681,6 @@ CONFIG_SOUND_IT8172=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -608,24 +693,31 @@ CONFIG_SOUND_IT8172=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -646,12 +738,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -682,7 +772,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -691,6 +781,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -711,7 +802,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -725,7 +818,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -735,7 +852,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
 CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ivr_defconfig b/arch/mips/configs/ivr_defconfig
index 583ef5c5b1cd..9ba61dfc490d 100644
--- a/arch/mips/configs/ivr_defconfig
+++ b/arch/mips/configs/ivr_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:05 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:12 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,11 +11,13 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -26,13 +25,16 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -42,6 +44,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -57,40 +60,68 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 CONFIG_MIPS_IVR=y
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_ITE_BOARD_GEN=y
 CONFIG_IT8172_CIR=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -98,8 +129,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -115,14 +148,38 @@ CONFIG_CPU_NEVADA=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -131,7 +188,6 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -140,10 +196,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -156,6 +208,80 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -164,7 +290,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -183,7 +314,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -194,7 +324,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -239,6 +368,7 @@ CONFIG_IDE_GENERIC=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -249,6 +379,7 @@ CONFIG_IDE_GENERIC=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -261,78 +392,13 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -340,6 +406,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -365,12 +446,16 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -383,6 +468,8 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -394,6 +481,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -423,19 +512,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -445,6 +521,17 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -467,6 +554,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -492,6 +580,11 @@ CONFIG_RTC=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -502,10 +595,20 @@ CONFIG_RTC=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -525,7 +628,6 @@ CONFIG_RTC=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -535,13 +637,9 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -559,21 +657,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -594,12 +700,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -628,7 +732,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -637,6 +741,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -657,7 +762,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -671,7 +778,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -681,7 +812,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=m
 CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig
index 8abb5a0c6c12..21b2b8042f91 100644
--- a/arch/mips/configs/jaguar-atx_defconfig
+++ b/arch/mips/configs/jaguar-atx_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:05 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:14 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 # CONFIG_EXPERIMENTAL is not set
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -54,36 +57,70 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+CONFIG_MOMENCO_JAGUAR_ATX=y
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-CONFIG_MOMENCO_JAGUAR_ATX=y
-CONFIG_JAGUAR_DMALOW=y
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_JAGUAR_DMALOW=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_LIMITED_DMA=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_CPU_RM7K=y
 CONFIG_IRQ_MV64340=y
@@ -95,8 +132,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -112,6 +151,17 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_RM7000 is not set
 CONFIG_CPU_RM9000=y
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM9000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -119,13 +169,24 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -134,7 +195,6 @@ CONFIG_HIGHMEM=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -143,10 +203,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 
@@ -158,6 +214,68 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -166,7 +284,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -185,7 +308,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -195,7 +317,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -218,6 +339,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -228,6 +350,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -240,58 +363,8 @@ CONFIG_ATA_OVER_ETH=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -304,6 +377,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -343,9 +431,11 @@ CONFIG_EEPRO100=y
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_MV643XX_ETH=y
 CONFIG_MV643XX_ETH_0=y
 CONFIG_MV643XX_ETH_1=y
@@ -354,6 +444,7 @@ CONFIG_MV643XX_ETH_2=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -366,6 +457,8 @@ CONFIG_MV643XX_ETH_2=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -374,6 +467,8 @@ CONFIG_MV643XX_ETH_2=y
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -391,20 +486,10 @@ CONFIG_MV643XX_ETH_2=y
 # CONFIG_INPUT is not set
 
 #
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
+# Hardware I/O ports
 #
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 # CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
+# CONFIG_GAMEPORT is not set
 
 #
 # Character devices
@@ -425,6 +510,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -451,6 +537,10 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -461,10 +551,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -478,7 +578,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -488,13 +587,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -512,6 +607,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -519,13 +618,16 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -546,10 +648,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -570,7 +672,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
@@ -591,7 +693,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -605,7 +709,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -615,7 +743,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=m
+CONFIG_CRC32=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index da5d9ee2ecce..9a728c2d8fd5 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:06 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:17 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -50,40 +53,68 @@ CONFIG_CC_ALIGN_JUMPS=0
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_TOSHIBA_JMR3927=y
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+CONFIG_TOSHIBA_JMR3927=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_MIPS_TX3927=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -92,8 +123,10 @@ CONFIG_TOSHIBA_BOARDS=y
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 CONFIG_CPU_TX39XX=y
 # CONFIG_CPU_VR41XX is not set
@@ -109,12 +142,34 @@ CONFIG_CPU_TX39XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_TX39XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_RTC_DS1742=y
 
@@ -124,7 +179,6 @@ CONFIG_RTC_DS1742=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -133,10 +187,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -149,6 +199,80 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
 # Device Drivers
 #
 
@@ -157,7 +281,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
 
 #
 # Memory Technology Devices (MTD)
@@ -176,7 +305,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -187,7 +315,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -210,6 +337,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
 
 #
@@ -220,6 +348,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -232,78 +361,13 @@ CONFIG_ATA_OVER_ETH=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -311,6 +375,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -336,12 +415,16 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -354,6 +437,8 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -365,6 +450,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -394,19 +481,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -416,6 +490,17 @@ CONFIG_SERIO_RAW=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -426,11 +511,9 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
-# CONFIG_DIGI is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
@@ -438,10 +521,6 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_SX is not set
 # CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
-# CONFIG_SERIAL_TX3912 is not set
-CONFIG_TXX927_SERIAL=y
-CONFIG_TXX927_SERIAL_CONSOLE=y
-# CONFIG_SERIAL_TXX9 is not set
 
 #
 # Serial drivers
@@ -451,6 +530,8 @@ CONFIG_TXX927_SERIAL_CONSOLE=y
 #
 # Non-8250 serial port support
 #
+CONFIG_HAS_TXX9_SERIAL=y
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_UNIX98_PTYS is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -477,6 +558,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -487,10 +573,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -504,6 +600,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Graphics support
 #
 CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -511,6 +612,7 @@ CONFIG_FB=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_RADEON_OLD is not set
@@ -523,8 +625,11 @@ CONFIG_FB=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_E1356 is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -548,13 +653,9 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -572,6 +673,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -579,13 +684,16 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -606,10 +714,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -638,7 +746,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -647,6 +755,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -667,7 +776,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -681,7 +792,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -691,7 +826,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig
index 8d600ae890f4..03cd0ca6e639 100644
--- a/arch/mips/configs/lasat200_defconfig
+++ b/arch/mips/configs/lasat200_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:06 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:19 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,53 +59,83 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-CONFIG_LASAT=y
-CONFIG_PICVUE=y
-CONFIG_PICVUE_PROC=y
-CONFIG_DS1603=y
-CONFIG_LASAT_SYSCTL=y
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+CONFIG_LASAT=y
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_PICVUE=y
+CONFIG_PICVUE_PROC=y
+CONFIG_DS1603=y
+CONFIG_LASAT_SYSCTL=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_NILE4=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_MIPS_GT64120=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -118,17 +151,41 @@ CONFIG_CPU_R5000=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_BOARD_SCACHE=y
 CONFIG_R5000_CPU_SCACHE=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -137,7 +194,6 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
 CONFIG_MMU=y
 
 #
@@ -146,10 +202,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -162,6 +214,76 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -170,15 +292,20 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 
@@ -223,6 +350,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_LASAT=y
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -258,7 +386,6 @@ CONFIG_MTD_LASAT=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -269,7 +396,6 @@ CONFIG_MTD_LASAT=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -326,6 +452,7 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -343,6 +470,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -353,6 +481,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -365,68 +494,8 @@ CONFIG_IDEDMA_AUTO=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
+# Network device support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -439,6 +508,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -464,12 +548,16 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -482,6 +570,8 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -493,6 +583,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -522,19 +614,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -544,6 +623,17 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -564,6 +654,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -590,6 +681,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -600,10 +696,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -623,7 +729,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -633,13 +738,9 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -657,10 +758,15 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -670,13 +776,16 @@ CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -697,12 +806,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -728,12 +835,13 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -742,6 +850,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -762,7 +871,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -776,7 +887,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -786,7 +921,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 79519ac5af4a..2acdec959dd0 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:53:14 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:22 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,44 +59,75 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 CONFIG_MIPS_MALTA=y
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_I8259=y
 CONFIG_MIPS_BONITO64=y
 CONFIG_MIPS_MSC=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
 CONFIG_MIPS_BOARDS_GEN=y
 CONFIG_MIPS_GT64120=y
 CONFIG_SWAP_IO_SPACE=y
@@ -104,8 +138,10 @@ CONFIG_HAVE_STD_PC_SERIAL_PORT=y
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -121,14 +157,48 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_CPU_MIPS64_R1=y
+CONFIG_SYS_HAS_CPU_NEVADA=y
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT=y
+# CONFIG_MIPS_MT_SMP is not set
+CONFIG_MIPS_VPE_LOADER=y
+CONFIG_MIPS_VPE_LOADER_TOM=y
+CONFIG_MIPS_VPE_APSP_API=y
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -137,7 +207,6 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -146,10 +215,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -162,229 +227,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=m
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-CONFIG_BLK_DEV_PIIX=y
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_ISCSI_ATTRS=m
-
-#
-# SCSI low-level drivers
-#
-CONFIG_BLK_DEV_3W_XXXX_RAID=m
-CONFIG_SCSI_3W_9XXX=m
-CONFIG_SCSI_ACARD=m
-CONFIG_SCSI_AACRAID=m
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=m
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -393,15 +236,20 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_FWMARK=y
 CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
@@ -419,8 +267,10 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 
 #
 # IP: Virtual Server Configuration
@@ -465,6 +315,9 @@ CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 CONFIG_BRIDGE_NETFILTER=y
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
 
 #
 # IP: Netfilter Configuration
@@ -472,11 +325,15 @@ CONFIG_BRIDGE_NETFILTER=y
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -501,9 +358,12 @@ CONFIG_IP_NF_MATCH_PHYSDEV=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -520,12 +380,14 @@ CONFIG_IP_NF_NAT_IRC=m
 CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -535,7 +397,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -555,8 +417,10 @@ CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_PHYSDEV=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 
 #
@@ -582,8 +446,11 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -611,10 +478,6 @@ CONFIG_IPDDP_DECAP=y
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
@@ -634,6 +497,7 @@ CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_QOS=y
 CONFIG_NET_ESTIMATOR=y
 CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_ROUTE=y
@@ -644,6 +508,7 @@ CONFIG_NET_CLS_IND=y
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
 
@@ -651,17 +516,254 @@ CONFIG_NET_CLS_POLICE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_FD=m
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_LBD is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+
+#
+# SCSI low-level drivers
+#
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=m
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -669,6 +771,21 @@ CONFIG_TUN=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -713,13 +830,17 @@ CONFIG_PCNET32=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -732,6 +853,8 @@ CONFIG_PCNET32=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -744,6 +867,8 @@ CONFIG_PCNET32=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -773,19 +898,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -795,6 +907,17 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -815,6 +938,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -840,6 +964,11 @@ CONFIG_RTC=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -850,10 +979,20 @@ CONFIG_RTC=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -873,7 +1012,6 @@ CONFIG_RTC=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -883,13 +1021,9 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -907,10 +1041,15 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -931,12 +1070,14 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_EXPORT=y
+CONFIG_XFS_QUOTA=m
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
 CONFIG_QUOTA=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
@@ -944,6 +1085,7 @@ CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -971,12 +1113,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1002,16 +1142,19 @@ CONFIG_UFS_FS=m
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -1020,6 +1163,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1079,7 +1223,9 @@ CONFIG_NLS_UTF8=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -1101,6 +1247,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
@@ -1125,9 +1272,12 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig
new file mode 100644
index 000000000000..fb9bdd9e3151
--- /dev/null
+++ b/arch/mips/configs/mipssim_defconfig
@@ -0,0 +1,775 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:25 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+CONFIG_MIPS_SIM=y
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT=y
+# CONFIG_MIPS_MT_SMP is not set
+CONFIG_MIPS_VPE_LOADER=y
+CONFIG_MIPS_VPE_LOADER_TOM=y
+CONFIG_MIPS_VPE_APSP_API=y
+# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_NET_DIVERT=y
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_POLICE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_MIPS_SIM_NET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp"
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB is not set
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_MIPS_UNCACHED is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index 0fea57ef18f2..e2c082128532 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:07 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:28 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,57 +59,86 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-CONFIG_VICTOR_MPC30X=y
-# CONFIG_ZAO_CAPCELLA is not set
-CONFIG_PCI_VR41XX=y
-CONFIG_VRC4173=y
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_TANBAC_TB022X is not set
+CONFIG_VICTOR_MPC30X=y
+# CONFIG_ZAO_CAPCELLA is not set
+CONFIG_PCI_VR41XX=y
+CONFIG_VRC4173=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 CONFIG_CPU_VR41XX=y
@@ -122,12 +154,36 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -136,17 +192,26 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+# CONFIG_CARDBUS is not set
 
 #
 # PC-card bridges
 #
+# CONFIG_YENTA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_VRC4173=y
 
 #
 # PCI Hotplug Support
@@ -161,6 +226,78 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -169,7 +306,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -188,7 +330,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -197,13 +338,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
 
 #
 # IO Schedulers
@@ -217,11 +356,35 @@ CONFIG_ATA_OVER_ETH=m
 #
 # ATA/ATAPI/MFM/RLL support
 #
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -232,6 +395,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -244,79 +408,13 @@ CONFIG_ATA_OVER_ETH=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -324,20 +422,14 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# PHY device support
 #
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
 
 #
-# Tulip family network device support
+# Ethernet (10 or 100Mbit)
 #
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_MII=m
 
 #
 # Ethernet (1000 Mbit)
@@ -349,12 +441,16 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -366,7 +462,59 @@ CONFIG_NET_ETHERNET=y
 #
 # Wireless LAN (non-hamradio)
 #
-# CONFIG_NET_RADIO is not set
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+CONFIG_HERMES=m
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_PCMCIA_AXNET=m
 
 #
 # Wan interfaces
@@ -378,6 +526,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -407,19 +557,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -429,6 +566,17 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -439,16 +587,16 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -472,9 +620,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Ftape, the floppy tape device driver
 #
 # CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -485,10 +644,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -508,7 +677,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -518,13 +686,120 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
 #
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
 
 #
 # USB Gadget Support
@@ -542,21 +817,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -577,12 +860,10 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -609,9 +890,8 @@ CONFIG_NFS_FS=y
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -620,6 +900,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -640,9 +921,11 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=32M console=ttyVR0,19200"
 
 #
 # Security options
@@ -656,26 +939,27 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
@@ -687,9 +971,8 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig
index b4cf97a732bc..ffb23fcab862 100644
--- a/arch/mips/configs/ocelot_3_defconfig
+++ b/arch/mips/configs/ocelot_3_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:07 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:30 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,25 +11,30 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -42,6 +44,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -57,40 +60,68 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 CONFIG_MOMENCO_OCELOT_3=y
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_CPU_RM7K=y
 CONFIG_IRQ_MV64340=y
@@ -102,8 +133,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -119,6 +152,17 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_RM7000 is not set
 CONFIG_CPU_RM9000=y
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM9000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -126,13 +170,26 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
-# CONFIG_HIGHMEM is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -141,7 +198,6 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -150,10 +206,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -166,6 +218,110 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -174,7 +330,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -193,7 +354,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -205,7 +365,6 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 
@@ -226,6 +385,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=m
 CONFIG_SCSI_PROC_FS=y
 
@@ -237,6 +397,7 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -251,6 +412,7 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=m
 
 #
 # SCSI low-level drivers
@@ -266,18 +428,13 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=m
@@ -286,6 +443,8 @@ CONFIG_SCSI_QLA2XXX=m
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
@@ -300,6 +459,8 @@ CONFIG_SCSI_QLA2XXX=m
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -312,105 +473,13 @@ CONFIG_SCSI_QLA2XXX=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -418,6 +487,21 @@ CONFIG_TUN=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -440,7 +524,6 @@ CONFIG_NET_PCI=y
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -463,9 +546,12 @@ CONFIG_E100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_MV643XX_ETH=y
 CONFIG_MV643XX_ETH_0=y
 CONFIG_MV643XX_ETH_1=y
@@ -474,6 +560,7 @@ CONFIG_MV643XX_ETH_2=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -486,6 +573,8 @@ CONFIG_MV643XX_ETH_2=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -505,6 +594,8 @@ CONFIG_PPPOE=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -531,19 +622,6 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -553,6 +631,17 @@ CONFIG_SERIO=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -573,6 +662,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -598,6 +688,11 @@ CONFIG_RTC=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -608,10 +703,20 @@ CONFIG_RTC=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -625,6 +730,11 @@ CONFIG_RTC=y
 # Graphics support
 #
 CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -632,6 +742,7 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_RADEON_OLD is not set
@@ -644,8 +755,11 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_E1356 is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -675,13 +789,9 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -699,10 +809,15 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -715,17 +830,21 @@ CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -746,15 +865,10 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -778,16 +892,19 @@ CONFIG_CRAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -797,6 +914,7 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -856,7 +974,9 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="ip=any root=nfs"
 
@@ -869,7 +989,31 @@ CONFIG_CMDLINE="ip=any root=nfs"
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -879,9 +1023,8 @@ CONFIG_CMDLINE="ip=any root=nfs"
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig
index a38903db85a0..d3a5fee02b79 100644
--- a/arch/mips/configs/ocelot_c_defconfig
+++ b/arch/mips/configs/ocelot_c_defconfig
@@ -1,11 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:07 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:33 2005
 #
 CONFIG_MIPS=y
-CONFIG_64BIT=y
-CONFIG_64BIT=y
 
 #
 # Code maturity level options
@@ -13,24 +11,29 @@ CONFIG_64BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -40,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -49,39 +53,68 @@ CONFIG_CC_ALIGN_JUMPS=0
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-CONFIG_MOMENCO_OCELOT_C=y
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+CONFIG_MOMENCO_OCELOT_C=y
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_MV64340=y
 CONFIG_PCI_MARVELL=y
@@ -91,8 +124,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -108,6 +143,17 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_CPU_RM7000=y
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -115,9 +161,23 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -126,7 +186,6 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -135,10 +194,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -156,6 +211,79 @@ CONFIG_MIPS32_N32=y
 CONFIG_BINFMT_ELF32=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
 # Device Drivers
 #
 
@@ -164,7 +292,12 @@ CONFIG_BINFMT_ELF32=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
 
 #
 # Memory Technology Devices (MTD)
@@ -183,7 +316,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -194,7 +326,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -216,6 +347,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
 
 #
@@ -226,6 +358,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -238,77 +371,13 @@ CONFIG_ATA_OVER_ETH=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -316,6 +385,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -341,13 +425,17 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 # CONFIG_MV643XX_ETH is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -360,6 +448,8 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -371,6 +461,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -400,19 +492,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -422,6 +501,17 @@ CONFIG_SERIO_RAW=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -442,6 +532,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -468,6 +559,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -478,10 +574,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -501,7 +607,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -511,13 +616,9 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -535,21 +636,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -570,12 +679,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -607,6 +714,7 @@ CONFIG_NFSD=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -615,6 +723,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -635,7 +744,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -649,7 +760,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -659,7 +794,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig
index 920d59b56a4e..1edde12ebff9 100644
--- a/arch/mips/configs/ocelot_defconfig
+++ b/arch/mips/configs/ocelot_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:08 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:35 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -50,40 +53,68 @@ CONFIG_CC_ALIGN_JUMPS=0
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 CONFIG_MOMENCO_OCELOT=y
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_CPU_RM7K=y
 CONFIG_MIPS_GT64120=y
@@ -96,8 +127,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -113,6 +146,17 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_CPU_RM7000=y
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -120,11 +164,25 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -140,10 +198,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 
@@ -155,6 +209,79 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
 # Device Drivers
 #
 
@@ -166,6 +293,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -182,13 +314,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -211,6 +341,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
 
 #
@@ -221,6 +352,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -231,77 +363,28 @@ CONFIG_ATA_OVER_ETH=y
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
+# Network device support
 #
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# QoS and/or fair queueing
+# PHY device support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
 
 #
-# Network testing
+# MII PHY device drivers
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
 
 #
 # Ethernet (10 or 100Mbit)
@@ -334,6 +417,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -363,18 +448,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -384,6 +457,16 @@ CONFIG_SERIO_RAW=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -425,10 +508,13 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -439,10 +525,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -462,7 +558,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -476,10 +571,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -492,24 +583,31 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -530,12 +628,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -567,6 +663,7 @@ CONFIG_NFSD=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -575,6 +672,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -595,7 +693,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -609,7 +709,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -619,7 +743,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/ocelot_g_defconfig
index ef5ea50893d1..e2d5188cdc15 100644
--- a/arch/mips/configs/ocelot_g_defconfig
+++ b/arch/mips/configs/ocelot_g_defconfig
@@ -1,11 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:08 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:38 2005
 #
 CONFIG_MIPS=y
-CONFIG_64BIT=y
-CONFIG_64BIT=y
 
 #
 # Code maturity level options
@@ -13,24 +11,29 @@ CONFIG_64BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -40,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -49,39 +53,68 @@ CONFIG_CC_ALIGN_JUMPS=0
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-CONFIG_MOMENCO_OCELOT_G=y
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+CONFIG_MOMENCO_OCELOT_G=y
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_CPU_RM7K=y
 CONFIG_PCI_MARVELL=y
@@ -94,8 +127,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -111,6 +146,17 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_CPU_RM7000=y
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -118,9 +164,23 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -129,7 +189,6 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -138,10 +197,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -159,6 +214,79 @@ CONFIG_MIPS32_N32=y
 CONFIG_BINFMT_ELF32=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+
+#
 # Device Drivers
 #
 
@@ -167,7 +295,12 @@ CONFIG_BINFMT_ELF32=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
 
 #
 # Memory Technology Devices (MTD)
@@ -186,7 +319,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -197,7 +329,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -219,6 +350,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
 
 #
@@ -229,6 +361,7 @@ CONFIG_ATA_OVER_ETH=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -241,77 +374,13 @@ CONFIG_ATA_OVER_ETH=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -319,6 +388,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -345,12 +429,16 @@ CONFIG_GALILEO_64240_ETH=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -363,6 +451,8 @@ CONFIG_GALILEO_64240_ETH=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -374,6 +464,8 @@ CONFIG_GALILEO_64240_ETH=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -403,19 +495,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -425,6 +504,17 @@ CONFIG_SERIO_RAW=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -445,6 +535,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -471,6 +562,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -481,10 +577,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -504,7 +610,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -514,13 +619,9 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -538,21 +639,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -573,12 +682,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -610,6 +717,7 @@ CONFIG_NFSD=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -618,6 +726,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -638,7 +747,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -652,7 +763,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -662,7 +797,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 813e3a8b480b..47247addee1b 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:08 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:41 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,56 +59,70 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+CONFIG_MIPS_PB1100=y
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-CONFIG_SOC_AU1100=y
-# CONFIG_SOC_AU1500 is not set
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-CONFIG_MIPS_PB1100=y
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1100=y
+CONFIG_SOC_AU1X00=y
 CONFIG_SWAP_IO_SPACE=y
 # CONFIG_AU1X00_USB_DEVICE is not set
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -113,8 +130,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -130,15 +149,39 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_MIPS_MT is not set
+CONFIG_64BIT_PHYS_ADDR=y
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -154,6 +197,8 @@ CONFIG_MMU=y
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 
 #
 # PC-card bridges
@@ -171,6 +216,100 @@ CONFIG_PCMCIA=m
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -181,15 +320,20 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 
@@ -233,9 +377,8 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_PB1100=y
-CONFIG_MTD_PB1500_BOOT=y
-CONFIG_MTD_PB1500_USER=y
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -270,14 +413,12 @@ CONFIG_MTD_PB1500_USER=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -300,6 +441,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -310,6 +452,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -320,94 +463,28 @@ CONFIG_ATA_OVER_ETH=m
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# QoS and/or fair queueing
+# PHY device support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
 
 #
-# Network testing
+# MII PHY device drivers
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -453,6 +530,8 @@ CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -482,18 +561,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -503,6 +570,16 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -534,14 +611,14 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-CONFIG_RTC=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -550,6 +627,10 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -560,10 +641,20 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -583,7 +674,6 @@ CONFIG_SYNCLINK_CS=m
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -593,12 +683,9 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -613,7 +700,10 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
@@ -622,6 +712,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -640,10 +731,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -664,13 +757,10 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -704,6 +794,7 @@ CONFIG_NFSD=m
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -713,6 +804,7 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -772,7 +864,9 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -788,26 +882,27 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
@@ -819,9 +914,8 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index 49e528340a39..f91a4eaae51a 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:09 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:44 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,63 +59,80 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+CONFIG_MIPS_PB1500=y
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-# CONFIG_SOC_AU1100 is not set
-CONFIG_SOC_AU1500=y
-# CONFIG_SOC_AU1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-CONFIG_MIPS_PB1500=y
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_COHERENT=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1500=y
+CONFIG_SOC_AU1X00=y
 # CONFIG_AU1X00_USB_DEVICE is not set
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -128,15 +148,39 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 CONFIG_64BIT_PHYS_ADDR=y
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -145,7 +189,6 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -154,6 +197,8 @@ CONFIG_MMU=y
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -177,6 +222,100 @@ CONFIG_PCCARD_NONSTATIC=m
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -187,12 +326,87 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
 #
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
 
 #
 # Parallel port support
@@ -206,7 +420,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -218,7 +431,6 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -275,6 +487,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_HPT366=y
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -292,6 +505,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -302,6 +516,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -314,94 +529,13 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
+# Network device support
 #
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -409,6 +543,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -435,12 +584,16 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -453,6 +606,8 @@ CONFIG_MIPS_AU1X00_ENET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # PCMCIA network device support
@@ -484,6 +639,8 @@ CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -513,19 +670,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -535,6 +679,17 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 # CONFIG_VT is not set
@@ -554,6 +709,7 @@ CONFIG_SERIAL_AU1X00=y
 CONFIG_SERIAL_AU1X00_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -585,6 +741,11 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -595,10 +756,20 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -612,7 +783,6 @@ CONFIG_SYNCLINK_CS=m
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -622,13 +792,9 @@ CONFIG_SYNCLINK_CS=m
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -646,12 +812,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -670,10 +841,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -694,13 +867,10 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -712,6 +882,8 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -732,6 +904,7 @@ CONFIG_NFSD=m
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -741,6 +914,7 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -800,7 +974,9 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -816,27 +992,28 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -847,9 +1024,8 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 8e426776c098..bbad27cb40a2 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:09 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:47 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,63 +59,80 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+CONFIG_MIPS_PB1550=y
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-CONFIG_SOC_AU1X00=y
-# CONFIG_SOC_AU1000 is not set
-# CONFIG_SOC_AU1100 is not set
-# CONFIG_SOC_AU1500 is not set
-CONFIG_SOC_AU1550=y
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-CONFIG_MIPS_PB1550=y
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_COHERENT=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SOC_AU1550=y
+CONFIG_SOC_AU1X00=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -128,15 +148,39 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 CONFIG_64BIT_PHYS_ADDR=y
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -145,7 +189,6 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -154,6 +197,8 @@ CONFIG_MMU=y
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -177,6 +222,100 @@ CONFIG_PCCARD_NONSTATIC=m
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -187,12 +326,87 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
 #
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ALCHEMY=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
 
 #
 # Parallel port support
@@ -206,7 +420,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -218,7 +431,6 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -275,6 +487,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_HPT366=y
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -292,6 +505,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -302,6 +516,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -314,94 +529,13 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
+# Network device support
 #
-# CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -409,6 +543,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -435,12 +584,16 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -453,6 +606,8 @@ CONFIG_MIPS_AU1X00_ENET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # PCMCIA network device support
@@ -476,6 +631,8 @@ CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -505,19 +662,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -527,6 +671,17 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 # CONFIG_VT is not set
@@ -546,6 +701,7 @@ CONFIG_SERIAL_AU1X00=y
 CONFIG_SERIAL_AU1X00_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -577,6 +733,11 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -587,10 +748,20 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -604,7 +775,6 @@ CONFIG_SYNCLINK_CS=m
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -614,13 +784,9 @@ CONFIG_SYNCLINK_CS=m
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -638,12 +804,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -662,10 +833,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -686,13 +859,10 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -704,6 +874,8 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -724,6 +896,7 @@ CONFIG_NFSD=m
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -733,6 +906,7 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -792,7 +966,9 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -808,26 +984,27 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
@@ -839,9 +1016,8 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
new file mode 100644
index 000000000000..95f84d711912
--- /dev/null
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -0,0 +1,1069 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:50 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+CONFIG_PNX8550_JBS=y
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_PNX8550=y
+CONFIG_SOC_PNX8550=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+CONFIG_CPU_R4X00=y
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
+# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_LLDSCD=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+# CONFIG_PCI_DEBUG is not set
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+CONFIG_BLK_DEV_IDESCSI=y
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_BLK_DEV_OFFBOARD=y
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+CONFIG_BLK_DEV_HPT366=y
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+CONFIG_8139TOO_TUNE_TWISTER=y
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_IP3106 is not set
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB is not set
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_MIPS_UNCACHED is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig
new file mode 100644
index 000000000000..deb24c29ac0a
--- /dev/null
+++ b/arch/mips/configs/pnx8550-v2pci_defconfig
@@ -0,0 +1,1251 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:53 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_PNX8550_V2PCI=y
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_PNX8550=y
+CONFIG_SOC_PNX8550=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+CONFIG_CPU_R4X00=y
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
+# CONFIG_64BIT_PHYS_ADDR is not set
+CONFIG_CPU_ADVANCED=y
+CONFIG_CPU_HAS_LLSC=y
+# CONFIG_CPU_HAS_LLDSCD is not set
+# CONFIG_CPU_HAS_WB is not set
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+CONFIG_NATSEMI=y
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_IP3106 is not set
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON_OLD is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_E1356 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig
index b6568e421b99..741a9a971367 100644
--- a/arch/mips/configs/qemu_defconfig
+++ b/arch/mips/configs/qemu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 11:49:54 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:56 2005
 #
 CONFIG_MIPS=y
 
@@ -17,6 +17,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
@@ -25,6 +26,7 @@ CONFIG_LOCALVERSION=""
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -74,6 +76,7 @@ CONFIG_BASE_SMALL=1
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
@@ -91,6 +94,7 @@ CONFIG_QEMU=y
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SIBYTE_SWARM is not set
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
@@ -105,7 +109,6 @@ CONFIG_QEMU=y
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_COHERENT=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_I8259=y
@@ -119,7 +122,7 @@ CONFIG_HAVE_STD_PC_SERIAL_PORT=y
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
 # CONFIG_CPU_MIPS64_R2 is not set
@@ -127,7 +130,7 @@ CONFIG_HAVE_STD_PC_SERIAL_PORT=y
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
 # CONFIG_CPU_R4300 is not set
-CONFIG_CPU_R4X00=y
+# CONFIG_CPU_R4X00 is not set
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
@@ -138,9 +141,11 @@ CONFIG_CPU_R4X00=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
 #
 # Kernel type
@@ -151,15 +156,18 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -214,8 +222,8 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
@@ -232,9 +240,15 @@ CONFIG_TCP_CONG_BIC=y
 #
 # Network testing
 #
+# CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
 
 #
 # Device Drivers
@@ -248,6 +262,11 @@ CONFIG_STANDALONE=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -265,13 +284,12 @@ CONFIG_STANDALONE=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -291,6 +309,7 @@ CONFIG_IOSCHED_NOOP=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
 
 #
@@ -331,6 +350,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=y
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -470,7 +504,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # I2C support
 #
 # CONFIG_I2C is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Dallas's 1-wire bus
@@ -481,12 +514,17 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -532,7 +570,6 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
 
 #
 # SN Devices
@@ -547,10 +584,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -559,6 +592,7 @@ CONFIG_INOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -576,11 +610,13 @@ CONFIG_INOTIFY=y
 #
 # Pseudo filesystems
 #
-# CONFIG_PROC_FS is not set
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
 # CONFIG_SYSFS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -634,12 +670,35 @@ CONFIG_CMDLINE="console=ttyS0 debug ip=172.20.0.2:172.20.0.1::255.255.0.0"
 # Security options
 #
 # CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
 
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -649,7 +708,8 @@ CONFIG_CMDLINE="console=ttyS0 debug ip=172.20.0.2:172.20.0.1::255.255.0.0"
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig
new file mode 100644
index 000000000000..2bc61ca4ba08
--- /dev/null
+++ b/arch/mips/configs/rbhma4500_defconfig
@@ -0,0 +1,1259 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:26:59 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+# CONFIG_KOBJECT_UEVENT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+CONFIG_TOSHIBA_RBTX4938=y
+
+#
+# Multiplex Pin Select
+#
+CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y
+# CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set
+# CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_HAVE_STD_PC_SERIAL_PORT=y
+CONFIG_TOSHIBA_BOARDS=y
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+CONFIG_CPU_TX49XX=y
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_TX49XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
+CONFIG_CPU_ADVANCED=y
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_LLDSCD=y
+CONFIG_CPU_HAS_WB=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+CONFIG_ISA=y
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_CHIPSETS is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+# CONFIG_SCSI is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+# CONFIG_EWRK3 is not set
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN_PLUS is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=y
+# CONFIG_SEEQ8005 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_ARLAN is not set
+# CONFIG_WAVELAN is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
+# CONFIG_AIRO is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_HAS_TXX9_SERIAL=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON_OLD is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+CONFIG_FB_ATY=y
+CONFIG_FB_ATY_CT=y
+# CONFIG_FB_ATY_GENERIC_LCD is not set
+# CONFIG_FB_ATY_XL_INIT is not set
+# CONFIG_FB_ATY_GX is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_E1356 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+CONFIG_USB_YEALINK=m
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index 17d4fce6c4c6..988a05824f01 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:09 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:03 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,11 +11,13 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -26,14 +25,17 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -43,6 +45,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -58,43 +61,73 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 CONFIG_SNI_RM200_PCI=y
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_ARC=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_I8259=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_ARC32=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -106,8 +139,10 @@ CONFIG_ARC_PROMLIB=y
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -123,24 +158,49 @@ CONFIG_CPU_R4X00=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
+CONFIG_HW_HAS_EISA=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
 CONFIG_ISA=y
 # CONFIG_EISA is not set
 CONFIG_MMU=y
@@ -151,11 +211,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-CONFIG_PCMCIA_PROBE=y
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -168,240 +223,7 @@ CONFIG_BINFMT_MISC=m
 CONFIG_TRAD_SIGNALS=y
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
-CONFIG_PARPORT_SERIAL=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_OTHER is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=m
-# CONFIG_BLK_DEV_XD is not set
-CONFIG_PARIDE=m
-CONFIG_PARIDE_PARPORT=m
-
-#
-# Parallel IDE high-level drivers
-#
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_BPCK6=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-# CONFIG_PARIDE_EPATC8 is not set
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_SX8=m
-CONFIG_BLK_DEV_UB=m
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
-CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=m
-CONFIG_MEGARAID_MAILBOX=m
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-# CONFIG_SCSI_NCR53C406A is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-# CONFIG_MD_RAID6 is not set
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_CRYPT is not set
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -410,12 +232,14 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=m
 CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=m
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 CONFIG_NET_KEY=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 # CONFIG_IP_PNP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
@@ -429,8 +253,10 @@ CONFIG_IP_PIMSM_V2=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 
 #
 # IP: Virtual Server Configuration
@@ -446,6 +272,9 @@ CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 CONFIG_BRIDGE_NETFILTER=y
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
 
 #
 # IP: Netfilter Configuration
@@ -453,11 +282,15 @@ CONFIG_BRIDGE_NETFILTER=y
 CONFIG_IP_NF_CONNTRACK=m
 # CONFIG_IP_NF_CT_ACCT is not set
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -482,9 +315,11 @@ CONFIG_IP_NF_MATCH_PHYSDEV=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -501,12 +336,14 @@ CONFIG_IP_NF_NAT_IRC=m
 CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -516,7 +353,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -536,8 +373,10 @@ CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_PHYSDEV=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 
 #
@@ -567,9 +406,12 @@ CONFIG_BRIDGE_EBT_MARK_T=m
 CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
-# CONFIG_BRIDGE_EBT_ULOG is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_BRIDGE_EBT_ULOG=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -588,10 +430,6 @@ CONFIG_DECNET=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
@@ -611,6 +449,7 @@ CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_QOS=y
 CONFIG_NET_ESTIMATOR=y
 CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_ROUTE=y
@@ -621,6 +460,7 @@ CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
 
@@ -628,8 +468,6 @@ CONFIG_NET_CLS_POLICE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 CONFIG_HAMRADIO=y
 
 #
@@ -646,8 +484,6 @@ CONFIG_ROSE=m
 CONFIG_MKISS=m
 CONFIG_6PACK=m
 CONFIG_BPQETHER=m
-# CONFIG_DMASCC is not set
-# CONFIG_SCC is not set
 # CONFIG_BAYCOM_SER_FDX is not set
 # CONFIG_BAYCOM_SER_HDX is not set
 # CONFIG_BAYCOM_PAR is not set
@@ -655,12 +491,257 @@ CONFIG_BPQETHER=m
 # CONFIG_YAM is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_NOT_PC=y
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_1284=y
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_FD=m
+CONFIG_PARIDE=m
+CONFIG_PARIDE_PARPORT=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+# CONFIG_PARIDE_EPATC8 is not set
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_SX8=m
+CONFIG_BLK_DEV_UB=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_LBD is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_IN2000 is not set
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+# CONFIG_SCSI_NCR53C406A is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID5=m
+# CONFIG_MD_RAID6 is not set
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_CRYPT is not set
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-CONFIG_ETHERTAP=m
 
 #
 # ARCnet devices
@@ -668,6 +749,21 @@ CONFIG_ETHERTAP=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -675,7 +771,6 @@ CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 
@@ -696,7 +791,6 @@ CONFIG_NET_ISA=y
 # CONFIG_LP486E is not set
 # CONFIG_ETH16I is not set
 CONFIG_NE2000=m
-# CONFIG_ZNET is not set
 # CONFIG_SEEQ8005 is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
@@ -733,13 +827,17 @@ CONFIG_EEPRO100=m
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 CONFIG_VIA_VELOCITY=m
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -752,6 +850,8 @@ CONFIG_VIA_VELOCITY=m
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -765,6 +865,8 @@ CONFIG_PLIP=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -794,20 +896,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_PARKBD=m
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -828,6 +916,18 @@ CONFIG_MOUSE_PS2=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_PARKBD=m
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -844,13 +944,13 @@ CONFIG_SERIAL_8250_EXTENDED=y
 # CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_MULTIPORT=y
 CONFIG_SERIAL_8250_RSA=y
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=m
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -881,6 +981,11 @@ CONFIG_RTC=m
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -891,15 +996,26 @@ CONFIG_RTC=m
 CONFIG_W1=m
 CONFIG_W1_MATROX=m
 CONFIG_W1_DS9490=m
-CONFIG_W1_DS9490_BRIDGE=m
+# CONFIG_W1_DS9490_BRIDGE is not set
 CONFIG_W1_THERM=m
 CONFIG_W1_SMEM=m
+# CONFIG_W1_DS2433 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -920,7 +1036,6 @@ CONFIG_W1_SMEM=m
 CONFIG_VGA_CONSOLE=y
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -930,6 +1045,8 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
 
@@ -940,8 +1057,6 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
@@ -949,7 +1064,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=m
 # CONFIG_USB_SL811_HCD is not set
 
@@ -965,11 +1083,10 @@ CONFIG_USB_PRINTER=m
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
 CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_HP8200e=y
+# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
@@ -992,12 +1109,17 @@ CONFIG_USB_KBD=m
 CONFIG_USB_MOUSE=m
 CONFIG_USB_AIPTEK=m
 CONFIG_USB_WACOM=m
+# CONFIG_USB_ACECAD is not set
 CONFIG_USB_KBTAB=m
 CONFIG_USB_POWERMATE=m
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 CONFIG_USB_EGALAX=m
+CONFIG_USB_YEALINK=m
 CONFIG_USB_XPAD=m
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -1022,30 +1144,15 @@ CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_AX8817X=y
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1057,9 +1164,11 @@ CONFIG_USB_USS720=m
 #
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRPRIME=m
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -1088,6 +1197,7 @@ CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_HP4X=m
 CONFIG_USB_SERIAL_SAFE=m
 CONFIG_USB_SERIAL_SAFE_PADDED=y
 # CONFIG_USB_SERIAL_TI is not set
@@ -1110,10 +1220,13 @@ CONFIG_USB_CYTHERM=m
 CONFIG_USB_PHIDGETKIT=m
 CONFIG_USB_PHIDGETSERVO=m
 # CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_SISUSBVGA=m
+# CONFIG_USB_SISUSBVGA_CON is not set
+CONFIG_USB_LD=m
 CONFIG_USB_TEST=m
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -1132,10 +1245,15 @@ CONFIG_USB_TEST=m
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=m
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -1152,17 +1270,20 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_EXPORT=y
+CONFIG_XFS_QUOTA=m
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -1192,12 +1313,10 @@ CONFIG_NTFS_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1224,15 +1343,18 @@ CONFIG_UFS_FS=m
 #
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
@@ -1256,6 +1378,7 @@ CONFIG_CODA_FS=m
 CONFIG_CODA_FS_OLD_API=y
 CONFIG_AFS_FS=m
 CONFIG_RXRPC=m
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1329,7 +1452,9 @@ CONFIG_NLS_UTF8=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -1352,6 +1477,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
@@ -1360,13 +1486,13 @@ CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -1376,9 +1502,12 @@ CONFIG_CRYPTO_TEST=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 1dc935f37582..4365d9c8c42e 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:10 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:05 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,30 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_CPUSETS=y
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +44,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -57,32 +61,49 @@ CONFIG_STOP_MACHINE=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-CONFIG_SIBYTE_SB1xxx_SOC=y
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 CONFIG_SIBYTE_SWARM=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_RHONE is not set
@@ -91,9 +112,12 @@ CONFIG_SIBYTE_SWARM=y
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_UNKNOWN is not set
-CONFIG_SIBYTE_BOARD=y
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_SIBYTE_SB1250=y
+CONFIG_SIBYTE_SB1xxx_SOC=y
 CONFIG_CPU_SB1_PASS_1=y
 # CONFIG_CPU_SB1_PASS_2_1250 is not set
 # CONFIG_CPU_SB1_PASS_2_2 is not set
@@ -102,18 +126,20 @@ CONFIG_CPU_SB1_PASS_1=y
 # CONFIG_CPU_SB1_PASS_3 is not set
 CONFIG_SIBYTE_HAS_LDT=y
 # CONFIG_SIMULATION is not set
+# CONFIG_CONFIG_SB1_CEX_ALWAYS_FATAL is not set
+# CONFIG_CONFIG_SB1_CERR_STALL is not set
 CONFIG_SIBYTE_CFE=y
 # CONFIG_SIBYTE_CFE_CONSOLE is not set
 # CONFIG_SIBYTE_BUS_WATCHER is not set
 # CONFIG_SIBYTE_SB1250_PROF is not set
 # CONFIG_SIBYTE_TBPROF is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_COHERENT=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -121,8 +147,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -138,22 +166,46 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 CONFIG_CPU_SB1=y
+CONFIG_SYS_HAS_CPU_SB1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_SIBYTE_DMA_PAGEOPS is not set
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 CONFIG_SB1_PASS_1_WORKAROUNDS=y
-# CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
-# CONFIG_HIGHMEM is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -161,7 +213,6 @@ CONFIG_NR_CPUS=2
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 CONFIG_MMU=y
 
 #
@@ -170,10 +221,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -183,7 +230,86 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
+# CONFIG_BUILD_ELF64 is not set
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_MIPS32_O32=y
+# CONFIG_MIPS32_N32 is not set
+CONFIG_BINFMT_ELF32=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -194,7 +320,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -213,7 +344,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -226,8 +356,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=9220
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -263,7 +391,7 @@ CONFIG_BLK_DEV_IDEFLOPPY=y
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_IDEPCI is not set
-CONFIG_BLK_DEV_IDE_SWARM=y
+# CONFIG_BLK_DEV_IDE_SWARM is not set
 # CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 # CONFIG_IDEDMA_AUTO is not set
@@ -272,6 +400,7 @@ CONFIG_BLK_DEV_IDE_SWARM=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -282,6 +411,7 @@ CONFIG_BLK_DEV_IDE_SWARM=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -294,78 +424,13 @@ CONFIG_BLK_DEV_IDE_SWARM=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -373,6 +438,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -399,12 +479,16 @@ CONFIG_MII=y
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
 CONFIG_NET_SB1250_MAC=y
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -417,6 +501,8 @@ CONFIG_NET_SB1250_MAC=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -428,6 +514,8 @@ CONFIG_NET_SB1250_MAC=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -445,25 +533,15 @@ CONFIG_NET_SB1250_MAC=y
 # CONFIG_INPUT is not set
 
 #
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
+# Hardware I/O ports
 #
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
 # CONFIG_SERIO_PCIPS2 is not set
 # CONFIG_SERIO_LIBPS2 is not set
 CONFIG_SERIO_RAW=m
-
-#
-# Input Device Drivers
-#
+# CONFIG_GAMEPORT is not set
 
 #
 # Character devices
@@ -472,11 +550,13 @@ CONFIG_SERIO_RAW=m
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
 # CONFIG_STALDRV is not set
 CONFIG_SIBYTE_SB1250_DUART=y
 CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
@@ -489,6 +569,7 @@ CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -515,6 +596,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -525,10 +611,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -542,7 +638,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -552,13 +647,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -576,12 +667,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 CONFIG_FS_MBCACHE=y
@@ -591,10 +687,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -615,11 +713,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -643,13 +740,14 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -658,6 +756,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -678,7 +777,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=15
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_SB1XXX_CORELIS is not set
@@ -695,27 +796,28 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -726,9 +828,8 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig
index dd07e866b128..d835f6db1f41 100644
--- a/arch/mips/configs/sead_defconfig
+++ b/arch/mips/configs/sead_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:10 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:07 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,22 +11,26 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_HOTPLUG is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -39,6 +40,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -48,40 +50,69 @@ CONFIG_CC_ALIGN_JUMPS=0
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 CONFIG_MIPS_SEAD=y
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_BOARDS_GEN=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -89,8 +120,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -106,15 +139,42 @@ CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_CPU_MIPS64_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -128,10 +188,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 
@@ -143,6 +199,11 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+# CONFIG_NET is not set
+
+#
 # Device Drivers
 #
 
@@ -154,6 +215,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -170,7 +235,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -178,11 +242,8 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=18432
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
 
 #
 # IO Schedulers
@@ -200,6 +261,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
 
 #
@@ -210,6 +272,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -220,9 +283,8 @@ CONFIG_IOSCHED_CFQ=y
 #
 
 #
-# Networking support
+# Network device support
 #
-# CONFIG_NET is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 
@@ -238,47 +300,18 @@ CONFIG_IOSCHED_CFQ=y
 #
 # Input device support
 #
-CONFIG_INPUT=y
+# CONFIG_INPUT is not set
 
 #
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
+# Hardware I/O ports
 #
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
 
 #
 # Character devices
 #
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
+# CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -294,7 +327,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
+CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 
@@ -315,10 +348,13 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -329,10 +365,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -347,13 +393,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_FB is not set
 
 #
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
 # Sound
 #
 # CONFIG_SOUND is not set
@@ -365,10 +404,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -381,28 +416,31 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
-CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -423,10 +461,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -448,8 +486,18 @@ CONFIG_RAMFS=y
 #
 # Partition Types
 #
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
 
 #
 # Native Language Support
@@ -464,15 +512,16 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
 #
 # Security options
 #
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #
@@ -488,7 +537,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index c9d3f83caf0f..bf60a17de2b0 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:12 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:10 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,55 +59,87 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-CONFIG_TANBAC_TB0226=y
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+CONFIG_TANBAC_TB022X=y
+CONFIG_TANBAC_TB0226=y
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
+CONFIG_PCI_VR41XX=y
+# CONFIG_VRC4173 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 CONFIG_CPU_VR41XX=y
@@ -120,19 +155,44 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
-# CONFIG_PCI is not set
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
 CONFIG_MMU=y
 
 #
@@ -141,12 +201,9 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
+# CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
@@ -156,6 +213,87 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -167,6 +305,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -183,19 +326,21 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
 
 #
 # IO Schedulers
@@ -209,33 +354,12 @@ CONFIG_ATA_OVER_ETH=m
 #
 # ATA/ATAPI/MFM/RLL support
 #
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_BLK_DEV_IDESCSI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -245,15 +369,15 @@ CONFIG_SCSI_PROC_FS=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
 CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 
 #
@@ -262,11 +386,42 @@ CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
@@ -277,131 +432,132 @@ CONFIG_SCSI_CONSTANTS=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_IEEE1394 is not set
 
 #
 # I2O device support
 #
+# CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
+# Network device support
 #
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=m
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# ARCnet devices
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
+# CONFIG_ARCNET is not set
 
 #
-# QoS and/or fair queueing
+# PHY device support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
 
 #
-# Network testing
+# MII PHY device drivers
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+CONFIG_EEPRO100=y
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_LAN_SAA9730 is not set
 
 #
 # Ethernet (1000 Mbit)
 #
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
 
 #
 # Token Ring devices
 #
+# CONFIG_TR is not set
 
 #
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW2200 is not set
 
 #
 # Wan interfaces
 #
 # CONFIG_WAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -421,28 +577,13 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -452,6 +593,12 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -462,16 +609,16 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -489,14 +636,22 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_TANBAC_TB0219 is not set
 
 #
 # Ftape, the floppy tape device driver
 #
 # CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -507,10 +662,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -523,48 +688,147 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Graphics support
 #
-CONFIG_FB=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
 
 #
-# Logo configuration
+# Sound
 #
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_SOUND is not set
 
 #
-# Sound
+# USB support
 #
-CONFIG_SOUND=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
 
 #
-# Advanced Linux Sound Architecture
+# Miscellaneous USB options
 #
-# CONFIG_SND is not set
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
 
 #
-# Open Sound System
+# USB Host Controller Drivers
 #
-# CONFIG_SOUND_PRIME is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
 
 #
-# USB support
+# USB Device Class drivers
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
 #
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
 
 #
 # USB Gadget Support
@@ -582,39 +846,41 @@ CONFIG_SOUND=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
+# CONFIG_ISO9660_FS is not set
 # CONFIG_UDF_FS is not set
 
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
 # CONFIG_NTFS_FS is not set
 
 #
@@ -623,13 +889,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -653,16 +916,19 @@ CONFIG_CRAMFS=m
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -673,6 +939,7 @@ CONFIG_SMB_NLS_REMOTE="cp932"
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -732,9 +999,11 @@ CONFIG_NLS_ISO8859_1=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=32M console=ttyVR0,115200"
 
 #
 # Security options
@@ -746,7 +1015,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -756,9 +1049,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
+CONFIG_CRC16=m
+CONFIG_CRC32=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0229_defconfig
index 2cb669188aa9..ac8b64e87b8a 100644
--- a/arch/mips/configs/tb0229_defconfig
+++ b/arch/mips/configs/tb0229_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:12 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:13 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,58 +59,87 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_TANBAC_TB0226 is not set
-CONFIG_TANBAC_TB0229=y
-CONFIG_TANBAC_TB0219=y
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-CONFIG_PCI_VR41XX=y
-# CONFIG_VRC4173 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+CONFIG_TANBAC_TB022X=y
+# CONFIG_TANBAC_TB0226 is not set
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
+CONFIG_PCI_VR41XX=y
+# CONFIG_VRC4173 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 CONFIG_CPU_VR41XX=y
@@ -123,12 +155,36 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -136,8 +192,7 @@ CONFIG_CPU_HAS_SYNC=y
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_LEGACY_PROC is not set
 CONFIG_MMU=y
 
 #
@@ -146,10 +201,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -162,6 +213,88 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -170,7 +303,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -189,7 +327,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -199,11 +336,11 @@ CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -226,6 +363,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -236,6 +374,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -248,83 +387,13 @@ CONFIG_ATA_OVER_ETH=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=m
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -332,6 +401,21 @@ CONFIG_DUMMY=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -346,7 +430,7 @@ CONFIG_MII=y
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
+# CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
@@ -358,7 +442,11 @@ CONFIG_EEPRO100=y
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -375,14 +463,19 @@ CONFIG_EEPRO100=y
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -395,6 +488,8 @@ CONFIG_EEPRO100=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -416,6 +511,8 @@ CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -435,29 +532,13 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -467,6 +548,12 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -477,16 +564,16 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -505,14 +592,21 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
+CONFIG_TANBAC_TB0219=y
 
 #
 # Ftape, the floppy tape device driver
 #
 # CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -523,10 +617,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -546,7 +650,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -556,13 +659,122 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
 #
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
 
 #
 # USB Gadget Support
@@ -580,10 +792,15 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -597,18 +814,22 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=y
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
 CONFIG_XFS_QUOTA=y
 # CONFIG_XFS_SECURITY is not set
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -635,13 +856,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -665,16 +883,19 @@ CONFIG_CRAMFS=m
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -685,6 +906,7 @@ CONFIG_SMB_NLS_REMOTE="cp932"
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -744,9 +966,11 @@ CONFIG_NLS_ISO8859_1=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="mem=64M console=ttyS0,38400 ip=bootp root=/dev/nfs"
+CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
 
 #
 # Security options
@@ -758,7 +982,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -768,9 +1016,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index 17b9f2f65ba0..95344832d66e 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-mm1
-# Thu Sep  1 22:58:34 2005
+# Linux kernel version: 2.6.14-rc5-mm1
+# Tue Oct 25 00:20:22 2005
 #
 CONFIG_MIPS=y
 
@@ -19,6 +19,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
+CONFIG_SWAP_PREFETCH=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
@@ -55,74 +56,91 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
 
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-CONFIG_TANBAC_TB022X=y
-# CONFIG_TANBAC_TB0226 is not set
-CONFIG_TANBAC_TB0287=y
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-CONFIG_PCI_VR41XX=y
-# CONFIG_VRC4173 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_NEC_CMBVR4133 is not set
+CONFIG_TANBAC_TB022X=y
+# CONFIG_TANBAC_TB0226 is not set
+CONFIG_TANBAC_TB0287=y
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
+CONFIG_PCI_VR41XX=y
+# CONFIG_VRC4173 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 CONFIG_CPU_VR41XX=y
@@ -138,12 +156,25 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -152,6 +183,9 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -262,7 +296,6 @@ CONFIG_TCP_CONG_HTCP=m
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -280,6 +313,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -296,7 +334,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -312,6 +349,7 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -321,6 +359,11 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -410,13 +453,20 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI Transport Layers
+#
+# CONFIG_SAS_CLASS is not set
 
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -425,12 +475,10 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
@@ -462,6 +510,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -529,6 +578,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -572,6 +622,7 @@ CONFIG_R8169=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Wan interfaces
@@ -682,6 +733,7 @@ CONFIG_GPIO_VR41XX=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -770,12 +822,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -891,6 +946,11 @@ CONFIG_USB_MON=y
 #
 
 #
+# EDAC - error detection and reporting (RAS)
+#
+# CONFIG_EDAC is not set
+
+#
 # Distributed Lock Manager
 #
 # CONFIG_DLM is not set
@@ -901,20 +961,22 @@ CONFIG_USB_MON=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISER4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=y
-# CONFIG_XFS_RT is not set
 CONFIG_XFS_QUOTA=y
 # CONFIG_XFS_SECURITY is not set
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=m
@@ -948,8 +1010,8 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1004,6 +1066,11 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
@@ -1036,6 +1103,3 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ISA_DMA_API=y
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index 16e07fca446f..ab13621ef3b9 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:12 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:16 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,24 +11,29 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -41,6 +43,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,56 +59,84 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_NEC_CMBVR4133 is not set
-# CONFIG_CASIO_E55 is not set
-CONFIG_IBM_WORKPAD=y
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-CONFIG_VRC4171=y
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_NEC_CMBVR4133 is not set
+# CONFIG_CASIO_E55 is not set
+CONFIG_IBM_WORKPAD=y
+# CONFIG_TANBAC_TB022X is not set
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 CONFIG_CPU_VR41XX=y
@@ -121,12 +152,36 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
 #
@@ -138,11 +193,17 @@ CONFIG_MMU=y
 #
 # PCCARD (PCMCIA/CardBus) support
 #
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 
 #
 # PC-card bridges
 #
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
 CONFIG_PCMCIA_PROBE=y
 
 #
@@ -157,6 +218,78 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -165,7 +298,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -185,18 +323,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
 
 #
 # IO Schedulers
@@ -219,6 +352,7 @@ CONFIG_BLK_DEV_IDE=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=m
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
@@ -237,6 +371,7 @@ CONFIG_IDE_GENERIC=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -252,6 +387,7 @@ CONFIG_IDE_GENERIC=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -262,76 +398,13 @@ CONFIG_IDE_GENERIC=y
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
+# Network device support
 #
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -339,12 +412,26 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=m
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 # CONFIG_AT1700 is not set
@@ -373,6 +460,19 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_NET_RADIO is not set
 
 #
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_PCMCIA_AXNET=m
+
+#
 # Wan interfaces
 #
 # CONFIG_WAN is not set
@@ -380,6 +480,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -409,18 +511,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -430,6 +520,16 @@ CONFIG_SERIO_RAW=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -440,16 +540,15 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -484,10 +583,19 @@ CONFIG_WATCHDOG=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_GPIO_VR41XX is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -498,10 +606,20 @@ CONFIG_WATCHDOG=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -522,7 +640,6 @@ CONFIG_WATCHDOG=y
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -536,10 +653,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -552,7 +665,10 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
@@ -561,6 +677,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 CONFIG_FS_MBCACHE=y
@@ -570,10 +687,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -594,12 +713,10 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -630,6 +747,7 @@ CONFIG_NFSD=y
 # CONFIG_NFSD_TCP is not set
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -638,6 +756,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -658,9 +777,11 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="console=ttyVR0,19200 mem=16M"
 
 #
 # Security options
@@ -672,7 +793,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -682,7 +827,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index 6d2290777ad7..5b0b7f30e205 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:13 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:27:18 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,25 +11,31 @@ CONFIG_32BIT=y
 # CONFIG_EXPERIMENTAL is not set
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -42,6 +45,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -56,34 +60,68 @@ CONFIG_STOP_MACHINE=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-CONFIG_PMC_YOSEMITE=y
-# CONFIG_HYPERTRANSPORT is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+CONFIG_PMC_YOSEMITE=y
+# CONFIG_QEMU is not set
 # CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_HYPERTRANSPORT is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_COHERENT=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_CPU_RM7K=y
 CONFIG_IRQ_CPU_RM9K=y
@@ -93,8 +131,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -110,20 +150,43 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_RM7000 is not set
 CONFIG_CPU_RM9000=y
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_RM9000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -131,7 +194,7 @@ CONFIG_NR_CPUS=2
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 CONFIG_MMU=y
 
 #
@@ -140,10 +203,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 
@@ -155,6 +214,69 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
 # Device Drivers
 #
 
@@ -163,10 +285,15 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -183,7 +310,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -193,7 +319,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -216,6 +341,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
 
 #
@@ -226,6 +352,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -238,59 +365,8 @@ CONFIG_ATA_OVER_ETH=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=m
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -303,6 +379,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -327,13 +418,16 @@ CONFIG_MII=y
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_TITAN_GE=y
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -346,6 +440,8 @@ CONFIG_TITAN_GE=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -354,6 +450,8 @@ CONFIG_TITAN_GE=y
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -371,20 +469,10 @@ CONFIG_TITAN_GE=y
 # CONFIG_INPUT is not set
 
 #
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
+# Hardware I/O ports
 #
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 # CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
+# CONFIG_GAMEPORT is not set
 
 #
 # Character devices
@@ -405,6 +493,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -432,6 +521,10 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -442,10 +535,20 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -459,7 +562,6 @@ CONFIG_GEN_RTC_X=y
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -469,13 +571,9 @@ CONFIG_GEN_RTC_X=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -493,6 +591,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -500,13 +602,16 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -527,11 +632,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -552,7 +656,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
@@ -573,8 +677,11 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -599,7 +706,31 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -609,7 +740,8 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CRC16=m
+CONFIG_CRC32=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/ddb5xxx/Kconfig b/arch/mips/ddb5xxx/Kconfig
new file mode 100644
index 000000000000..e9b5de49f4c2
--- /dev/null
+++ b/arch/mips/ddb5xxx/Kconfig
@@ -0,0 +1,4 @@
+config DDB5477_BUS_FREQUENCY
+	int "bus frequency (in kHZ, 0 for auto-detect)"
+	depends on DDB5477
+	default 0
diff --git a/arch/mips/ddb5xxx/ddb5074/nile4_pic.c b/arch/mips/ddb5xxx/ddb5074/nile4_pic.c
index 68c127cd70c9..8743ffce8653 100644
--- a/arch/mips/ddb5xxx/ddb5074/nile4_pic.c
+++ b/arch/mips/ddb5xxx/ddb5074/nile4_pic.c
@@ -209,14 +209,13 @@ static void nile4_irq_end(unsigned int irq) {
 #define nile4_irq_shutdown nile4_disable_irq
 
 static hw_irq_controller nile4_irq_controller = {
-    "nile4",
-    nile4_irq_startup,
-    nile4_irq_shutdown,
-    nile4_enable_irq,
-    nile4_disable_irq,
-    nile4_ack_irq,
-    nile4_irq_end,
-    NULL
+	.typename = "nile4",
+	.startup = nile4_irq_startup,
+	.shutdown = nile4_irq_shutdown,
+	.enable = nile4_enable_irq,
+	.disable = nile4_disable_irq,
+	.ack = nile4_ack_irq,
+	.end = nile4_irq_end,
 };
 
 void nile4_irq_setup(u32 base) {
diff --git a/arch/mips/ddb5xxx/ddb5074/setup.c b/arch/mips/ddb5xxx/ddb5074/setup.c
index a73a5978d550..11535be265b9 100644
--- a/arch/mips/ddb5xxx/ddb5074/setup.c
+++ b/arch/mips/ddb5xxx/ddb5074/setup.c
@@ -85,7 +85,7 @@ static void __init ddb_time_init(void)
 
 
 
-static void __init ddb5074_setup(void)
+void __init plat_setup(void)
 {
 	set_io_port_base(NILE4_PCI_IO_BASE);
 	isa_slot_offset = NILE4_PCI_MEM_BASE;
@@ -106,8 +106,6 @@ static void __init ddb5074_setup(void)
 	panic_timeout = 180;
 }
 
-early_initcall(ddb5074_setup);
-
 #define USE_NILE4_SERIAL	0
 
 #if USE_NILE4_SERIAL
diff --git a/arch/mips/ddb5xxx/ddb5476/setup.c b/arch/mips/ddb5xxx/ddb5476/setup.c
index 71531f8146ea..f4e480a74edf 100644
--- a/arch/mips/ddb5xxx/ddb5476/setup.c
+++ b/arch/mips/ddb5xxx/ddb5476/setup.c
@@ -124,7 +124,7 @@ static struct {
 
 static void ddb5476_board_init(void);
 
-static void __init ddb5476_setup(void)
+void __init plat_setup(void)
 {
 	set_io_port_base(KSEG1ADDR(DDB_PCI_IO_BASE));
 
@@ -158,8 +158,6 @@ static void __init ddb5476_setup(void)
 	ddb5476_board_init();
 }
 
-early_initcall(ddb5476_setup);
-
 /*
  * We don't trust bios.  We essentially does hardware re-initialization
  * as complete as possible, as far as we know we can safely do.
diff --git a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c
index a77682be01ac..f66fe5b58636 100644
--- a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c
+++ b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c
@@ -53,14 +53,13 @@ static void vrc5476_irq_end(uint irq)
 }
 
 static hw_irq_controller vrc5476_irq_controller = {
-	"vrc5476",
-	vrc5476_irq_startup,
-	vrc5476_irq_shutdown,
-	vrc5476_irq_enable,
-	vrc5476_irq_disable,
-	vrc5476_irq_ack,
-	vrc5476_irq_end,
-	NULL				/* no affinity stuff for UP */
+	.typename = "vrc5476",
+	.startup = vrc5476_irq_startup,
+	.shutdown = vrc5476_irq_shutdown,
+	.enable = vrc5476_irq_enable,
+	.disable = vrc5476_irq_disable,
+	.ack = vrc5476_irq_ack,
+	.end = vrc5476_irq_end
 };
 
 void __init
diff --git a/arch/mips/ddb5xxx/ddb5477/irq_5477.c b/arch/mips/ddb5xxx/ddb5477/irq_5477.c
index 0d5e706207ec..5fcd5f070cdc 100644
--- a/arch/mips/ddb5xxx/ddb5477/irq_5477.c
+++ b/arch/mips/ddb5xxx/ddb5477/irq_5477.c
@@ -90,14 +90,13 @@ vrc5477_irq_end(unsigned int irq)
 }
 
 hw_irq_controller vrc5477_irq_controller = {
-	"vrc5477_irq",
-	vrc5477_irq_startup,
-	vrc5477_irq_shutdown,
-	vrc5477_irq_enable,
-	vrc5477_irq_disable,
-	vrc5477_irq_ack,
-	vrc5477_irq_end,
-	NULL			/* no affinity stuff for UP */
+	.typename = "vrc5477_irq",
+	.startup = vrc5477_irq_startup,
+	.shutdown = vrc5477_irq_shutdown,
+	.enable = vrc5477_irq_enable,
+	.disable = vrc5477_irq_disable,
+	.ack = vrc5477_irq_ack,
+	.end = vrc5477_irq_end
 };
 
 void __init vrc5477_irq_init(u32 irq_base)
diff --git a/arch/mips/ddb5xxx/ddb5477/setup.c b/arch/mips/ddb5xxx/ddb5477/setup.c
index d62f5a789b05..81163353c4a8 100644
--- a/arch/mips/ddb5xxx/ddb5477/setup.c
+++ b/arch/mips/ddb5xxx/ddb5477/setup.c
@@ -170,7 +170,7 @@ static void ddb5477_board_init(void);
 extern struct pci_controller ddb5477_ext_controller;
 extern struct pci_controller ddb5477_io_controller;
 
-static int  ddb5477_setup(void)
+void __init plat_setup(void)
 {
 	/* initialize board - we don't trust the loader */
         ddb5477_board_init();
@@ -193,12 +193,8 @@ static int  ddb5477_setup(void)
 
 	register_pci_controller (&ddb5477_ext_controller);
 	register_pci_controller (&ddb5477_io_controller);
-
-	return 0;
 }
 
-early_initcall(ddb5477_setup);
-
 static void __init ddb5477_board_init(void)
 {
 	/* ----------- setup PDARs ------------ */
diff --git a/arch/mips/dec/Makefile b/arch/mips/dec/Makefile
index 688757a97cb8..ed181fdc3ac9 100644
--- a/arch/mips/dec/Makefile
+++ b/arch/mips/dec/Makefile
@@ -2,8 +2,8 @@
 # Makefile for the DECstation family specific parts of the kernel
 #
 
-obj-y		:= ecc-berr.o int-handler.o ioasic-irq.o kn02-irq.o reset.o \
-		   setup.o time.o
+obj-y		:= ecc-berr.o int-handler.o ioasic-irq.o kn01-berr.o \
+		   kn02-irq.o kn02xa-berr.o reset.o setup.o time.o
 
 obj-$(CONFIG_PROM_CONSOLE)	+= promcon.o
 obj-$(CONFIG_CPU_HAS_WB)	+= wbflush.o
diff --git a/arch/mips/dec/ecc-berr.c b/arch/mips/dec/ecc-berr.c
index 6dbce92eb068..cc24c5ed0c05 100644
--- a/arch/mips/dec/ecc-berr.c
+++ b/arch/mips/dec/ecc-berr.c
@@ -6,7 +6,7 @@
  *	5000/240 (KN03), 5000/260 (KN05) and DECsystem 5900 (KN03),
  *	5900/260 (KN05) systems.
  *
- *	Copyright (c) 2003  Maciej W. Rozycki
+ *	Copyright (c) 2003, 2005  Maciej W. Rozycki
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -15,6 +15,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/spinlock.h>
@@ -57,7 +58,7 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 
 	const char *kind, *agent, *cycle, *event;
 	const char *status = "", *xbit = "", *fmt = "";
-	dma_addr_t address;
+	unsigned long address;
 	u16 syn = 0, sngl;
 
 	int i = 0;
@@ -66,7 +67,7 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 	u32 chksyn = *kn0x_chksyn;
 	int action = MIPS_BE_FATAL;
 
-	/* For non-ECC ack ASAP, so any subsequent errors get caught. */
+	/* For non-ECC ack ASAP, so that any subsequent errors get caught. */
 	if ((erraddr & (KN0X_EAR_VALID | KN0X_EAR_ECCERR)) == KN0X_EAR_VALID)
 		dec_ecc_be_ack();
 
@@ -74,7 +75,7 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 
 	if (!(erraddr & KN0X_EAR_VALID)) {
 		/* No idea what happened. */
-		printk(KERN_ALERT "Unidentified bus error %s.\n", kind);
+		printk(KERN_ALERT "Unidentified bus error %s\n", kind);
 		return action;
 	}
 
@@ -126,7 +127,7 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 			/* Ack now, no rewrite will happen. */
 			dec_ecc_be_ack();
 
-			fmt = KERN_ALERT "%s" "invalid.\n";
+			fmt = KERN_ALERT "%s" "invalid\n";
 		} else {
 			sngl = syn & KN0X_ESR_SNGLO;
 			syn &= KN0X_ESR_SYNLO;
@@ -144,7 +145,8 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 			} else if (!sngl) {
 				status = dbestr;
 			} else {
-				volatile u32 *ptr = (void *)KSEG1ADDR(address);
+				volatile u32 *ptr =
+					(void *)CKSEG1ADDR(address);
 
 				*ptr = *ptr;		/* Rewrite. */
 				iob();
@@ -160,12 +162,12 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 				if (syn == 0x01) {
 					fmt = KERN_ALERT "%s"
 					      "%#04x -- %s bit error "
-					      "at check bit C%s.\n";
+					      "at check bit C%s\n";
 					xbit = "X";
 				} else {
 					fmt = KERN_ALERT "%s"
 					      "%#04x -- %s bit error "
-					      "at check bit C%s%u.\n";
+					      "at check bit C%s%u\n";
 				}
 				i = syn >> 2;
 			} else {
@@ -175,16 +177,16 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 				if (i < 32)
 					fmt = KERN_ALERT "%s"
 					      "%#04x -- %s bit error "
-					      "at data bit D%s%u.\n";
+					      "at data bit D%s%u\n";
 				else
 					fmt = KERN_ALERT "%s"
-					      "%#04x -- %s bit error.\n";
+					      "%#04x -- %s bit error\n";
 			}
 		}
 	}
 
 	if (action != MIPS_BE_FIXUP)
-		printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx.\n",
+		printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n",
 			kind, agent, cycle, event, address);
 
 	if (action != MIPS_BE_FIXUP && erraddr & KN0X_EAR_ECCERR)
@@ -203,11 +205,11 @@ irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	int action = dec_ecc_be_backend(regs, 0, 1);
 
 	if (action == MIPS_BE_DISCARD)
-		return IRQ_NONE;
+		return IRQ_HANDLED;
 
 	/*
-	 * FIXME: Find affected processes and kill them, otherwise we
-	 * must die.
+	 * FIXME: Find the affected processes and kill them, otherwise
+	 * we must die.
 	 *
 	 * The interrupt is asynchronously delivered thus EPC and RA
 	 * may be irrelevant, but are printed for a reference.
@@ -225,16 +227,16 @@ irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id, struct pt_regs *regs)
  */
 static inline void dec_kn02_be_init(void)
 {
-	volatile u32 *csr = (void *)KN02_CSR_BASE;
+	volatile u32 *csr = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR);
 	unsigned long flags;
 
-	kn0x_erraddr = (void *)(KN02_SLOT_BASE + KN02_ERRADDR);
-	kn0x_chksyn = (void *)(KN02_SLOT_BASE + KN02_CHKSYN);
+	kn0x_erraddr = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_ERRADDR);
+	kn0x_chksyn = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CHKSYN);
 
 	spin_lock_irqsave(&kn02_lock, flags);
 
 	/* Preset write-only bits of the Control Register cache. */
-	cached_kn02_csr = *csr | KN03_CSR_LEDS;
+	cached_kn02_csr = *csr | KN02_CSR_LEDS;
 
 	/* Set normal ECC detection and generation. */
 	cached_kn02_csr &= ~(KN02_CSR_DIAGCHK | KN02_CSR_DIAGGEN);
@@ -248,11 +250,11 @@ static inline void dec_kn02_be_init(void)
 
 static inline void dec_kn03_be_init(void)
 {
-	volatile u32 *mcr = (void *)(KN03_SLOT_BASE + IOASIC_MCR);
-	volatile u32 *mbcs = (void *)(KN03_SLOT_BASE + KN05_MB_CSR);
+	volatile u32 *mcr = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_MCR);
+	volatile u32 *mbcs = (void *)CKSEG1ADDR(KN4K_SLOT_BASE + KN4K_MB_CSR);
 
-	kn0x_erraddr = (void *)(KN03_SLOT_BASE + IOASIC_ERRADDR);
-	kn0x_chksyn = (void *)(KN03_SLOT_BASE + IOASIC_CHKSYN);
+	kn0x_erraddr = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_ERRADDR);
+	kn0x_chksyn = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_CHKSYN);
 
 	/*
 	 * Set normal ECC detection and generation, enable ECC correction.
@@ -264,7 +266,7 @@ static inline void dec_kn03_be_init(void)
 	*mcr = (*mcr & ~(KN03_MCR_DIAGCHK | KN03_MCR_DIAGGEN)) |
 	       KN03_MCR_CORRECT;
 	if (current_cpu_data.cputype == CPU_R4400SC)
-		*mbcs |= KN05_MB_CSR_EE;
+		*mbcs |= KN4K_MB_CSR_EE;
 	fast_iob();
 }
 
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index c89768d5c4e5..41fa372007bf 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -2,9 +2,9 @@
  * arch/mips/dec/int-handler.S
  *
  * Copyright (C) 1995, 1996, 1997 Paul M. Antoine and Harald Koerfgen
- * Copyright (C) 2000, 2001, 2002, 2003  Maciej W. Rozycki
+ * Copyright (C) 2000, 2001, 2002, 2003, 2005  Maciej W. Rozycki
  *
- * Written by Ralf Baechle and Andreas Busse, modified for DECStation
+ * Written by Ralf Baechle and Andreas Busse, modified for DECstation
  * support by Paul Antoine and Harald Koerfgen.
  *
  * completly rewritten:
@@ -14,11 +14,12 @@
  * by Maciej W. Rozycki.
  */
 #include <linux/config.h>
+
+#include <asm/addrspace.h>
 #include <asm/asm.h>
-#include <asm/regdef.h>
 #include <asm/mipsregs.h>
+#include <asm/regdef.h>
 #include <asm/stackframe.h>
-#include <asm/addrspace.h>
 
 #include <asm/dec/interrupts.h>
 #include <asm/dec/ioasic_addrs.h>
@@ -28,11 +29,14 @@
 #include <asm/dec/kn02xa.h>
 #include <asm/dec/kn03.h>
 
+#define KN02_CSR_BASE		CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR)
+#define KN02XA_IOASIC_BASE	CKSEG1ADDR(KN02XA_SLOT_BASE + IOASIC_IOCTL)
+#define KN03_IOASIC_BASE	CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_IOCTL)
 
 		.text
 		.set	noreorder
 /*
- * decstation_handle_int: Interrupt handler for DECStations
+ * decstation_handle_int: Interrupt handler for DECstations
  *
  * We follow the model in the Indy interrupt code by David Miller, where he
  * says: a lot of complication here is taken away because:
@@ -48,7 +52,7 @@
  * 3) Linux only thinks in terms of all IRQs on or all IRQs
  *    off, nothing in between like BSD spl() brain-damage.
  *
- * Furthermore, the IRQs on the DECStations look basically (barring
+ * Furthermore, the IRQs on the DECstations look basically (barring
  * software IRQs which we don't use at all) like...
  *
  * DS2100/3100's, aka kn01, aka Pmax:
@@ -61,7 +65,7 @@
  *             3        Lance Ethernet
  *             4        DZ11 serial
  *             5        RTC
- *             6        Memory Controller
+ *             6        Memory Controller & Video
  *             7        FPU
  *
  * DS5000/200, aka kn02, aka 3max:
diff --git a/arch/mips/dec/kn01-berr.c b/arch/mips/dec/kn01-berr.c
new file mode 100644
index 000000000000..b9271db9bc76
--- /dev/null
+++ b/arch/mips/dec/kn01-berr.c
@@ -0,0 +1,201 @@
+/*
+ *	linux/arch/mips/dec/kn01-berr.c
+ *
+ *	Bus error event handling code for DECstation/DECsystem 3100
+ *	and 2100 (KN01) systems equipped with parity error detection
+ *	logic.
+ *
+ *	Copyright (c) 2005  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/inst.h>
+#include <asm/mipsregs.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+#include <asm/uaccess.h>
+
+#include <asm/dec/kn01.h>
+
+
+/* CP0 hazard avoidance. */
+#define BARRIER				\
+	__asm__ __volatile__(		\
+		".set	push\n\t"	\
+		".set	noreorder\n\t"	\
+		"nop\n\t"		\
+		".set	pop\n\t")
+
+/*
+ * Bits 7:0 of the Control Register are write-only -- the
+ * corresponding bits of the Status Register have a different
+ * meaning.  Hence we use a cache.  It speeds up things a bit
+ * as well.
+ *
+ * There is no default value -- it has to be initialized.
+ */
+u16 cached_kn01_csr;
+DEFINE_SPINLOCK(kn01_lock);
+
+
+static inline void dec_kn01_be_ack(void)
+{
+	volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
+	unsigned long flags;
+
+	spin_lock_irqsave(&kn01_lock, flags);
+
+	*csr = cached_kn01_csr | KN01_CSR_MEMERR;	/* Clear bus IRQ. */
+	iob();
+
+	spin_unlock_irqrestore(&kn01_lock, flags);
+}
+
+static int dec_kn01_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
+{
+	volatile u32 *kn01_erraddr = (void *)CKSEG1ADDR(KN01_SLOT_BASE +
+							KN01_ERRADDR);
+
+	static const char excstr[] = "exception";
+	static const char intstr[] = "interrupt";
+	static const char cpustr[] = "CPU";
+	static const char mreadstr[] = "memory read";
+	static const char readstr[] = "read";
+	static const char writestr[] = "write";
+	static const char timestr[] = "timeout";
+	static const char paritystr[] = "parity error";
+
+	int data = regs->cp0_cause & 4;
+	unsigned int __user *pc = (unsigned int __user *)regs->cp0_epc +
+				  ((regs->cp0_cause & CAUSEF_BD) != 0);
+	union mips_instruction insn;
+	unsigned long entrylo, offset;
+	long asid, entryhi, vaddr;
+
+	const char *kind, *agent, *cycle, *event;
+	unsigned long address;
+
+	u32 erraddr = *kn01_erraddr;
+	int action = MIPS_BE_FATAL;
+
+	/* Ack ASAP, so that any subsequent errors get caught. */
+	dec_kn01_be_ack();
+
+	kind = invoker ? intstr : excstr;
+
+	agent = cpustr;
+
+	if (invoker)
+		address = erraddr;
+	else {
+		/* Bloody hardware doesn't record the address for reads... */
+		if (data) {
+			/* This never faults. */
+			__get_user(insn.word, pc);
+			vaddr = regs->regs[insn.i_format.rs] +
+				insn.i_format.simmediate;
+		} else
+			vaddr = (long)pc;
+		if (KSEGX(vaddr) == CKSEG0 || KSEGX(vaddr) == CKSEG1)
+			address = CPHYSADDR(vaddr);
+		else {
+			/* Peek at what physical address the CPU used. */
+			asid = read_c0_entryhi();
+			entryhi = asid & (PAGE_SIZE - 1);
+			entryhi |= vaddr & ~(PAGE_SIZE - 1);
+			write_c0_entryhi(entryhi);
+			BARRIER;
+			tlb_probe();
+			/* No need to check for presence. */
+			tlb_read();
+			entrylo = read_c0_entrylo0();
+			write_c0_entryhi(asid);
+			offset = vaddr & (PAGE_SIZE - 1);
+			address = (entrylo & ~(PAGE_SIZE - 1)) | offset;
+		}
+	}
+
+	/* Treat low 256MB as memory, high -- as I/O. */
+	if (address < 0x10000000) {
+		cycle = mreadstr;
+		event = paritystr;
+	} else {
+		cycle = invoker ? writestr : readstr;
+		event = timestr;
+	}
+
+	if (is_fixup)
+		action = MIPS_BE_FIXUP;
+
+	if (action != MIPS_BE_FIXUP)
+		printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n",
+			kind, agent, cycle, event, address);
+
+	return action;
+}
+
+int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup)
+{
+	return dec_kn01_be_backend(regs, is_fixup, 0);
+}
+
+irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id,
+				    struct pt_regs *regs)
+{
+	volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
+	int action;
+
+	if (!(*csr & KN01_CSR_MEMERR))
+		return IRQ_NONE;		/* Must have been video. */
+
+	action = dec_kn01_be_backend(regs, 0, 1);
+
+	if (action == MIPS_BE_DISCARD)
+		return IRQ_HANDLED;
+
+	/*
+	 * FIXME: Find the affected processes and kill them, otherwise
+	 * we must die.
+	 *
+	 * The interrupt is asynchronously delivered thus EPC and RA
+	 * may be irrelevant, but are printed for a reference.
+	 */
+	printk(KERN_ALERT "Fatal bus interrupt, epc == %08lx, ra == %08lx\n",
+	       regs->cp0_epc, regs->regs[31]);
+	die("Unrecoverable bus error", regs);
+}
+
+
+void __init dec_kn01_be_init(void)
+{
+	volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
+	unsigned long flags;
+
+	spin_lock_irqsave(&kn01_lock, flags);
+
+	/* Preset write-only bits of the Control Register cache. */
+	cached_kn01_csr = *csr;
+	cached_kn01_csr &= KN01_CSR_STATUS | KN01_CSR_PARDIS | KN01_CSR_TXDIS;
+	cached_kn01_csr |= KN01_CSR_LEDS;
+
+	/* Enable parity error detection. */
+	cached_kn01_csr &= ~KN01_CSR_PARDIS;
+	*csr = cached_kn01_csr;
+	iob();
+
+	spin_unlock_irqrestore(&kn01_lock, flags);
+
+	/* Clear any leftover errors from the firmware. */
+	dec_kn01_be_ack();
+}
diff --git a/arch/mips/dec/kn02-irq.c b/arch/mips/dec/kn02-irq.c
index e0bfcd1521e2..898bed502a34 100644
--- a/arch/mips/dec/kn02-irq.c
+++ b/arch/mips/dec/kn02-irq.c
@@ -4,7 +4,7 @@
  *	DECstation 5000/200 (KN02) Control and Status Register
  *	interrupts.
  *
- *	Copyright (c) 2002, 2003  Maciej W. Rozycki
+ *	Copyright (c) 2002, 2003, 2005  Maciej W. Rozycki
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -37,7 +37,8 @@ static int kn02_irq_base;
 
 static inline void unmask_kn02_irq(unsigned int irq)
 {
-	volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE;
+	volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE +
+						       KN02_CSR);
 
 	cached_kn02_csr |= (1 << (irq - kn02_irq_base + 16));
 	*csr = cached_kn02_csr;
@@ -45,7 +46,8 @@ static inline void unmask_kn02_irq(unsigned int irq)
 
 static inline void mask_kn02_irq(unsigned int irq)
 {
-	volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE;
+	volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE +
+						       KN02_CSR);
 
 	cached_kn02_csr &= ~(1 << (irq - kn02_irq_base + 16));
 	*csr = cached_kn02_csr;
@@ -105,13 +107,14 @@ static struct hw_interrupt_type kn02_irq_type = {
 
 void __init init_kn02_irqs(int base)
 {
-	volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE;
+	volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE +
+						       KN02_CSR);
 	unsigned long flags;
 	int i;
 
 	/* Mask interrupts. */
 	spin_lock_irqsave(&kn02_lock, flags);
-	cached_kn02_csr &= ~KN03_CSR_IOINTEN;
+	cached_kn02_csr &= ~KN02_CSR_IOINTEN;
 	*csr = cached_kn02_csr;
 	iob();
 	spin_unlock_irqrestore(&kn02_lock, flags);
diff --git a/arch/mips/dec/kn02xa-berr.c b/arch/mips/dec/kn02xa-berr.c
new file mode 100644
index 000000000000..6cd3f94f79fe
--- /dev/null
+++ b/arch/mips/dec/kn02xa-berr.c
@@ -0,0 +1,139 @@
+/*
+ *	linux/arch/mips/dec/kn02xa-berr.c
+ *
+ *	Bus error event handling code for 5000-series systems equipped
+ *	with parity error detection logic, i.e. DECstation/DECsystem
+ *	5000/120, /125, /133 (KN02-BA), 5000/150 (KN04-BA) and Personal
+ *	DECstation/DECsystem 5000/20, /25, /33 (KN02-CA), 5000/50
+ *	(KN04-CA) systems.
+ *
+ *	Copyright (c) 2005  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+
+#include <asm/dec/kn02ca.h>
+#include <asm/dec/kn02xa.h>
+#include <asm/dec/kn05.h>
+
+static inline void dec_kn02xa_be_ack(void)
+{
+	volatile u32 *mer = (void *)CKSEG1ADDR(KN02XA_MER);
+	volatile u32 *mem_intr = (void *)CKSEG1ADDR(KN02XA_MEM_INTR);
+
+	*mer = KN02CA_MER_INTR;		/* Clear errors; keep the ARC IRQ. */
+	*mem_intr = 0;			/* Any write clears the bus IRQ. */
+	iob();
+}
+
+static int dec_kn02xa_be_backend(struct pt_regs *regs, int is_fixup,
+				 int invoker)
+{
+	volatile u32 *kn02xa_mer = (void *)CKSEG1ADDR(KN02XA_MER);
+	volatile u32 *kn02xa_ear = (void *)CKSEG1ADDR(KN02XA_EAR);
+
+	static const char excstr[] = "exception";
+	static const char intstr[] = "interrupt";
+	static const char cpustr[] = "CPU";
+	static const char mreadstr[] = "memory read";
+	static const char readstr[] = "read";
+	static const char writestr[] = "write";
+	static const char timestr[] = "timeout";
+	static const char paritystr[] = "parity error";
+	static const char lanestat[][4] = { " OK", "BAD" };
+
+	const char *kind, *agent, *cycle, *event;
+	unsigned long address;
+
+	u32 mer = *kn02xa_mer;
+	u32 ear = *kn02xa_ear;
+	int action = MIPS_BE_FATAL;
+
+	/* Ack ASAP, so that any subsequent errors get caught. */
+	dec_kn02xa_be_ack();
+
+	kind = invoker ? intstr : excstr;
+
+	/* No DMA errors? */
+	agent = cpustr;
+
+	address = ear & KN02XA_EAR_ADDRESS;
+
+	/* Low 256MB is decoded as memory, high -- as TC. */
+	if (address < 0x10000000) {
+		cycle = mreadstr;
+		event = paritystr;
+	} else {
+		cycle = invoker ? writestr : readstr;
+		event = timestr;
+	}
+
+	if (is_fixup)
+		action = MIPS_BE_FIXUP;
+
+	if (action != MIPS_BE_FIXUP)
+		printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n",
+			kind, agent, cycle, event, address);
+
+	if (action != MIPS_BE_FIXUP && address < 0x10000000)
+		printk(KERN_ALERT "  Byte lane status %#3x -- "
+		       "#3: %s, #2: %s, #1: %s, #0: %s\n",
+		       (mer & KN02XA_MER_BYTERR) >> 8,
+		       lanestat[(mer & KN02XA_MER_BYTERR_3) != 0],
+		       lanestat[(mer & KN02XA_MER_BYTERR_2) != 0],
+		       lanestat[(mer & KN02XA_MER_BYTERR_1) != 0],
+		       lanestat[(mer & KN02XA_MER_BYTERR_0) != 0]);
+
+	return action;
+}
+
+int dec_kn02xa_be_handler(struct pt_regs *regs, int is_fixup)
+{
+	return dec_kn02xa_be_backend(regs, is_fixup, 0);
+}
+
+irqreturn_t dec_kn02xa_be_interrupt(int irq, void *dev_id,
+				    struct pt_regs *regs)
+{
+	int action = dec_kn02xa_be_backend(regs, 0, 1);
+
+	if (action == MIPS_BE_DISCARD)
+		return IRQ_HANDLED;
+
+	/*
+	 * FIXME: Find the affected processes and kill them, otherwise
+	 * we must die.
+	 *
+	 * The interrupt is asynchronously delivered thus EPC and RA
+	 * may be irrelevant, but are printed for a reference.
+	 */
+	printk(KERN_ALERT "Fatal bus interrupt, epc == %08lx, ra == %08lx\n",
+	       regs->cp0_epc, regs->regs[31]);
+	die("Unrecoverable bus error", regs);
+}
+
+
+void __init dec_kn02xa_be_init(void)
+{
+	volatile u32 *mbcs = (void *)CKSEG1ADDR(KN4K_SLOT_BASE + KN4K_MB_CSR);
+
+        /* For KN04 we need to make sure EE (?) is enabled in the MB.  */
+        if (current_cpu_data.cputype == CPU_R4000SC)
+		*mbcs |= KN4K_MB_CSR_EE;
+	fast_iob();
+
+	/* Clear any leftover errors from the firmware. */
+	dec_kn02xa_be_ack();
+}
diff --git a/arch/mips/dec/prom/identify.c b/arch/mips/dec/prom/identify.c
index 9380588cb15c..81d5e878ddce 100644
--- a/arch/mips/dec/prom/identify.c
+++ b/arch/mips/dec/prom/identify.c
@@ -2,7 +2,7 @@
  * identify.c: machine identification code.
  *
  * Copyright (C) 1998 Harald Koerfgen and Paul M. Antoine
- * Copyright (C) 2002, 2003, 2004  Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2004, 2005  Maciej W. Rozycki
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -12,6 +12,7 @@
 #include <linux/types.h>
 
 #include <asm/bootinfo.h>
+
 #include <asm/dec/ioasic.h>
 #include <asm/dec/ioasic_addrs.h>
 #include <asm/dec/kn01.h>
@@ -21,6 +22,7 @@
 #include <asm/dec/kn03.h>
 #include <asm/dec/kn230.h>
 #include <asm/dec/prom.h>
+#include <asm/dec/system.h>
 
 #include "dectypes.h"
 
@@ -68,34 +70,44 @@ EXPORT_SYMBOL(dec_rtc_base);
 
 static inline void prom_init_kn01(void)
 {
-	dec_rtc_base = (void *)KN01_RTC_BASE;
+	dec_kn_slot_base = KN01_SLOT_BASE;
 	dec_kn_slot_size = KN01_SLOT_SIZE;
+
+	dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN01_RTC);
 }
 
 static inline void prom_init_kn230(void)
 {
-	dec_rtc_base = (void *)KN01_RTC_BASE;
+	dec_kn_slot_base = KN01_SLOT_BASE;
 	dec_kn_slot_size = KN01_SLOT_SIZE;
+
+	dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN01_RTC);
 }
 
 static inline void prom_init_kn02(void)
 {
-	dec_rtc_base = (void *)KN02_RTC_BASE;
+	dec_kn_slot_base = KN02_SLOT_BASE;
 	dec_kn_slot_size = KN02_SLOT_SIZE;
+
+	dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN02_RTC);
 }
 
 static inline void prom_init_kn02xa(void)
 {
-	ioasic_base = (void *)KN02XA_IOASIC_BASE;
-	dec_rtc_base = (void *)KN02XA_RTC_BASE;
+	dec_kn_slot_base = KN02XA_SLOT_BASE;
 	dec_kn_slot_size = IOASIC_SLOT_SIZE;
+
+	ioasic_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_IOCTL);
+	dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_TOY);
 }
 
 static inline void prom_init_kn03(void)
 {
-	ioasic_base = (void *)KN03_IOASIC_BASE;
-	dec_rtc_base = (void *)KN03_RTC_BASE;
+	dec_kn_slot_base = KN03_SLOT_BASE;
 	dec_kn_slot_size = IOASIC_SLOT_SIZE;
+
+	ioasic_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_IOCTL);
+	dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_TOY);
 }
 
 
diff --git a/arch/mips/dec/prom/init.c b/arch/mips/dec/prom/init.c
index 60f74256e689..32a7cc7e4c65 100644
--- a/arch/mips/dec/prom/init.c
+++ b/arch/mips/dec/prom/init.c
@@ -6,6 +6,8 @@
  */
 #include <linux/config.h>
 #include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/linkage.h>
 #include <linux/smp.h>
 #include <linux/string.h>
 #include <linux/types.h>
@@ -85,17 +87,13 @@ void __init which_prom(s32 magic, s32 *prom_vec)
 
 void __init prom_init(void)
 {
-	extern void dec_machine_halt(void);
+	extern void ATTRIB_NORET dec_machine_halt(void);
 	static char cpu_msg[] __initdata =
 		"Sorry, this kernel is compiled for a wrong CPU type!\n";
-	static char r3k_msg[] __initdata =
-		"Please recompile with \"CONFIG_CPU_R3000 = y\".\n";
-	static char r4k_msg[] __initdata =
-		"Please recompile with \"CONFIG_CPU_R4x00 = y\".\n";
 	s32 argc = fw_arg0;
-	s32 argv = fw_arg1;
+	s32 *argv = (void *)fw_arg1;
 	u32 magic = fw_arg2;
-	s32 prom_vec = fw_arg3;
+	s32 *prom_vec = (void *)fw_arg3;
 
 	/*
 	 * Determine which PROM we have
@@ -113,6 +111,8 @@ void __init prom_init(void)
 #if defined(CONFIG_CPU_R3000)
 	if ((current_cpu_data.cputype == CPU_R4000SC) ||
 	    (current_cpu_data.cputype == CPU_R4400SC)) {
+		static char r4k_msg[] __initdata =
+			"Please recompile with \"CONFIG_CPU_R4x00 = y\".\n";
 		printk(cpu_msg);
 		printk(r4k_msg);
 		dec_machine_halt();
@@ -122,6 +122,8 @@ void __init prom_init(void)
 #if defined(CONFIG_CPU_R4X00)
 	if ((current_cpu_data.cputype == CPU_R3000) ||
 	    (current_cpu_data.cputype == CPU_R3000A)) {
+		static char r3k_msg[] __initdata =
+			"Please recompile with \"CONFIG_CPU_R3000 = y\".\n";
 		printk(cpu_msg);
 		printk(r3k_msg);
 		dec_machine_halt();
diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c
index e4f6f26425ea..83d4556c3cb5 100644
--- a/arch/mips/dec/prom/memory.c
+++ b/arch/mips/dec/prom/memory.c
@@ -35,22 +35,22 @@ static inline void pmax_setup_memory_region(void)
 	extern char genexcept_early;
 
 	/* Install exception handler */
-	memcpy(&old_handler, (void *)(KSEG0 + 0x80), 0x80);
-	memcpy((void *)(KSEG0 + 0x80), &genexcept_early, 0x80);
+	memcpy(&old_handler, (void *)(CKSEG0 + 0x80), 0x80);
+	memcpy((void *)(CKSEG0 + 0x80), &genexcept_early, 0x80);
 
 	/* read unmapped and uncached (KSEG1)
 	 * DECstations have at least 4MB RAM
 	 * Assume less than 480MB of RAM, as this is max for 5000/2xx
 	 * FIXME this should be replaced by the first free page!
 	 */
-	for (memory_page = (unsigned char *) KSEG1 + CHUNK_SIZE;
-	     (mem_err== 0) && (memory_page < ((unsigned char *) KSEG1+0x1E000000));
+	for (memory_page = (unsigned char *)CKSEG1 + CHUNK_SIZE;
+	     mem_err == 0 && memory_page < (unsigned char *)CKSEG1 + 0x1e00000;
   	     memory_page += CHUNK_SIZE) {
 		dummy = *memory_page;
 	}
-	memcpy((void *)(KSEG0 + 0x80), &old_handler, 0x80);
+	memcpy((void *)(CKSEG0 + 0x80), &old_handler, 0x80);
 
-	add_memory_region(0, (unsigned long)memory_page - KSEG1 - CHUNK_SIZE,
+	add_memory_region(0, (unsigned long)memory_page - CKSEG1 - CHUNK_SIZE,
 			  BOOT_MEM_RAM);
 }
 
@@ -65,7 +65,7 @@ static inline void rex_setup_memory_region(void)
 	memmap *bm;
 
 	/* some free 64k */
-	bm = (memmap *)KSEG0ADDR(0x28000);
+	bm = (memmap *)CKSEG0ADDR(0x28000);
 
 	bitmap_size = rex_getbitmap(bm);
 
diff --git a/arch/mips/dec/reset.c b/arch/mips/dec/reset.c
index 7e4d34d0573d..f78c6da47921 100644
--- a/arch/mips/dec/reset.c
+++ b/arch/mips/dec/reset.c
@@ -14,7 +14,7 @@ typedef void ATTRIB_NORET (* noret_func_t)(void);
 
 static inline void ATTRIB_NORET back_to_prom(void)
 {
-	noret_func_t func = (void *) KSEG1ADDR(0x1fc00000);
+	noret_func_t func = (void *)CKSEG1ADDR(0x1fc00000);
 
 	func();
 }
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index 6a69309baf40..9ef54fe1feaa 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -1,19 +1,20 @@
 /*
- * Setup the interrupt stuff.
+ * System-specific setup, especially interrupts.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
  * Copyright (C) 1998 Harald Koerfgen
- * Copyright (C) 2000, 2001, 2002, 2003  Maciej W. Rozycki
+ * Copyright (C) 2000, 2001, 2002, 2003, 2005  Maciej W. Rozycki
  */
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/param.h>
 #include <linux/console.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/module.h>
+#include <linux/param.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
 
@@ -38,6 +39,7 @@
 #include <asm/dec/kn02ca.h>
 #include <asm/dec/kn03.h>
 #include <asm/dec/kn230.h>
+#include <asm/dec/system.h>
 
 
 extern void dec_machine_restart(char *command);
@@ -47,10 +49,16 @@ extern irqreturn_t dec_intr_halt(int irq, void *dev_id, struct pt_regs *regs);
 
 extern asmlinkage void decstation_handle_int(void);
 
+unsigned long dec_kn_slot_base, dec_kn_slot_size;
+
+EXPORT_SYMBOL(dec_kn_slot_base);
+EXPORT_SYMBOL(dec_kn_slot_size);
+
 spinlock_t ioasic_ssr_lock;
 
 volatile u32 *ioasic_base;
-unsigned long dec_kn_slot_size;
+
+EXPORT_SYMBOL(ioasic_base);
 
 /*
  * IRQ routing and priority tables.  Priorites are set as follows:
@@ -77,6 +85,9 @@ unsigned long dec_kn_slot_size;
 int dec_interrupt[DEC_NR_INTS] = {
 	[0 ... DEC_NR_INTS - 1] = -1
 };
+
+EXPORT_SYMBOL(dec_interrupt);
+
 int_ptr cpu_mask_nr_tbl[DEC_MAX_CPU_INTS][2] = {
 	{ { .i = ~0 }, { .p = dec_intr_unimplemented } },
 };
@@ -108,11 +119,20 @@ static struct irqaction haltirq = {
 /*
  * Bus error (DBE/IBE exceptions and bus interrupts) handling setup.
  */
-void __init dec_be_init(void)
+static void __init dec_be_init(void)
 {
 	switch (mips_machtype) {
 	case MACH_DS23100:	/* DS2100/DS3100 Pmin/Pmax */
+		board_be_handler = dec_kn01_be_handler;
+		busirq.handler = dec_kn01_be_interrupt;
 		busirq.flags |= SA_SHIRQ;
+		dec_kn01_be_init();
+		break;
+	case MACH_DS5000_1XX:	/* DS5000/1xx 3min */
+	case MACH_DS5000_XX:	/* DS5000/xx Maxine */
+		board_be_handler = dec_kn02xa_be_handler;
+		busirq.handler = dec_kn02xa_be_interrupt;
+		dec_kn02xa_be_init();
 		break;
 	case MACH_DS5000_200:	/* DS5000/200 3max */
 	case MACH_DS5000_2X0:	/* DS5000/240 3max+ */
@@ -128,7 +148,7 @@ void __init dec_be_init(void)
 extern void dec_time_init(void);
 extern void dec_timer_setup(struct irqaction *);
 
-static void __init decstation_setup(void)
+void __init plat_setup(void)
 {
 	board_be_init = dec_be_init;
 	board_time_init = dec_time_init;
@@ -139,9 +159,10 @@ static void __init decstation_setup(void)
 	_machine_restart = dec_machine_restart;
 	_machine_halt = dec_machine_halt;
 	_machine_power_off = dec_machine_power_off;
-}
 
-early_initcall(decstation_setup);
+	ioport_resource.start = ~0UL;
+	ioport_resource.end = 0UL;
+}
 
 /*
  * Machine-specific initialisation for KN01, aka DS2100 (aka Pmin)
@@ -206,7 +227,7 @@ static int_ptr kn01_cpu_mask_nr_tbl[][2] __initdata = {
 		{ .p = cpu_all_int } },
 };
 
-void __init dec_init_kn01(void)
+static void __init dec_init_kn01(void)
 {
 	/* IRQ routing. */
 	memcpy(&dec_interrupt, &kn01_interrupt,
@@ -281,7 +302,7 @@ static int_ptr kn230_cpu_mask_nr_tbl[][2] __initdata = {
 		{ .p = cpu_all_int } },
 };
 
-void __init dec_init_kn230(void)
+static void __init dec_init_kn230(void)
 {
 	/* IRQ routing. */
 	memcpy(&dec_interrupt, &kn230_interrupt,
@@ -371,7 +392,7 @@ static int_ptr kn02_asic_mask_nr_tbl[][2] __initdata = {
 		{ .p = kn02_all_int } },
 };
 
-void __init dec_init_kn02(void)
+static void __init dec_init_kn02(void)
 {
 	/* IRQ routing. */
 	memcpy(&dec_interrupt, &kn02_interrupt,
@@ -472,7 +493,7 @@ static int_ptr kn02ba_asic_mask_nr_tbl[][2] __initdata = {
 		{ .p = asic_all_int } },
 };
 
-void __init dec_init_kn02ba(void)
+static void __init dec_init_kn02ba(void)
 {
 	/* IRQ routing. */
 	memcpy(&dec_interrupt, &kn02ba_interrupt,
@@ -569,7 +590,7 @@ static int_ptr kn02ca_asic_mask_nr_tbl[][2] __initdata = {
 		{ .p = asic_all_int } },
 };
 
-void __init dec_init_kn02ca(void)
+static void __init dec_init_kn02ca(void)
 {
 	/* IRQ routing. */
 	memcpy(&dec_interrupt, &kn02ca_interrupt,
@@ -670,7 +691,7 @@ static int_ptr kn03_asic_mask_nr_tbl[][2] __initdata = {
 		{ .p = asic_all_int } },
 };
 
-void __init dec_init_kn03(void)
+static void __init dec_init_kn03(void)
 {
 	/* IRQ routing. */
 	memcpy(&dec_interrupt, &kn03_interrupt,
@@ -744,7 +765,3 @@ void __init arch_init_irq(void)
 	if (dec_interrupt[DEC_IRQ_HALT] >= 0)
 		setup_irq(dec_interrupt[DEC_IRQ_HALT], &haltirq);
 }
-
-EXPORT_SYMBOL(ioasic_base);
-EXPORT_SYMBOL(dec_kn_slot_size);
-EXPORT_SYMBOL(dec_interrupt);
diff --git a/arch/mips/defconfig b/arch/mips/defconfig
index 20f84b119b4c..4b585e642c2a 100644
--- a/arch/mips/defconfig
+++ b/arch/mips/defconfig
@@ -1,12 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:48:59 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Oct 20 22:25:09 2005
 #
 CONFIG_MIPS=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT is not set
-CONFIG_32BIT=y
 
 #
 # Code maturity level options
@@ -14,25 +11,30 @@ CONFIG_32BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -42,6 +44,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -57,41 +60,69 @@ CONFIG_KMOD=y
 #
 # Machine selection
 #
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
 # CONFIG_MIPS_EV96100 is not set
 # CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5074 is not set
 # CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
 CONFIG_SGI_IP22=y
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
 # CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_ARC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_ARC32=y
@@ -103,8 +134,10 @@ CONFIG_ARC_PROMLIB=y
 #
 # CPU selection
 #
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
@@ -120,22 +153,48 @@ CONFIG_CPU_R5000=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_BOARD_SCACHE=y
 CONFIG_IP22_CPU_SCACHE=y
+# CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 # CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_LLDSCD=y
 CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
+CONFIG_HW_HAS_EISA=y
 # CONFIG_EISA is not set
 CONFIG_MMU=y
 
@@ -145,10 +204,6 @@ CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 
@@ -160,115 +215,7 @@ CONFIG_BINFMT_MISC=m
 CONFIG_TRAD_SIGNALS=y
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-
-#
-# SCSI low-level drivers
-#
-CONFIG_SGIWD93_SCSI=y
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -277,12 +224,14 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 # CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
@@ -296,8 +245,10 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 
 #
 # IP: Virtual Server Configuration
@@ -341,6 +292,9 @@ CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
 
 #
 # IP: Netfilter Configuration
@@ -348,11 +302,15 @@ CONFIG_NETFILTER=y
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
 # CONFIG_IP_NF_CT_PROTO_SCTP is not set
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -376,9 +334,12 @@ CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -395,12 +356,14 @@ CONFIG_IP_NF_NAT_IRC=m
 CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -410,7 +373,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -429,11 +392,16 @@ CONFIG_IP6_NF_MATCH_LENGTH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -456,10 +424,6 @@ CONFIG_SCTP_HMAC_MD5=y
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_CLK_JIFFIES is not set
 CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
@@ -479,6 +443,7 @@ CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_QOS=y
 CONFIG_NET_ESTIMATOR=y
 CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_ROUTE=y
@@ -489,6 +454,7 @@ CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
 
@@ -496,17 +462,153 @@ CONFIG_NET_CLS_POLICE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_LBD is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+
+#
+# SCSI low-level drivers
+#
+CONFIG_SGIWD93_SCSI=y
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-CONFIG_ETHERTAP=m
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -540,6 +642,8 @@ CONFIG_SGISEEQ=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -569,18 +673,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -598,6 +690,16 @@ CONFIG_MOUSE_SERIAL=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -644,11 +746,14 @@ CONFIG_SGI_DS1286=m
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_MAX_RAW_DEVS=256
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -659,10 +764,20 @@ CONFIG_MAX_RAW_DEVS=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -693,7 +808,6 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_SGI_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -707,10 +821,6 @@ CONFIG_LOGO_SGI_CLUT224=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -723,13 +833,17 @@ CONFIG_LOGO_SGI_CLUT224=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=m
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -741,12 +855,14 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_EXPORT=y
+CONFIG_XFS_QUOTA=m
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 CONFIG_MINIX_FS=m
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 CONFIG_QUOTA=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=m
@@ -754,6 +870,7 @@ CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -781,12 +898,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -811,15 +926,20 @@ CONFIG_UFS_FS=m
 #
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
@@ -835,6 +955,7 @@ CONFIG_CIFS=m
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -908,7 +1029,9 @@ CONFIG_NLS_UTF8=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -931,6 +1054,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
@@ -942,10 +1066,10 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -955,9 +1079,12 @@ CONFIG_CRYPTO_TEST=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=m
 CONFIG_CRC32=m
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/galileo-boards/ev96100/setup.c b/arch/mips/galileo-boards/ev96100/setup.c
index 28bd908c6d55..78dbb18edeb8 100644
--- a/arch/mips/galileo-boards/ev96100/setup.c
+++ b/arch/mips/galileo-boards/ev96100/setup.c
@@ -55,7 +55,7 @@ extern void mips_reboot_setup(void);
 
 unsigned char mac_0_1[12];
 
-static void __init ev96100_setup(void)
+void __init plat_setup(void)
 {
 	unsigned int config = read_c0_config();
 	unsigned int status = read_c0_status();
@@ -142,8 +142,6 @@ static void __init ev96100_setup(void)
 	tmp = GT_READ(GT_PCI0_CFGDATA_OFS);
 }
 
-early_initcall(ev96100_setup);
-
 unsigned short get_gt_devid(void)
 {
 	u32 gt_devid;
diff --git a/arch/mips/gt64120/ev64120/Kconfig b/arch/mips/gt64120/ev64120/Kconfig
new file mode 100644
index 000000000000..d691762cb0f7
--- /dev/null
+++ b/arch/mips/gt64120/ev64120/Kconfig
@@ -0,0 +1,3 @@
+config EVB_PCI1
+	bool "Enable Second PCI (PCI1)"
+	depends on MIPS_EV64120
diff --git a/arch/mips/gt64120/ev64120/setup.c b/arch/mips/gt64120/ev64120/setup.c
index dba0961400cc..98b5a96cc039 100644
--- a/arch/mips/gt64120/ev64120/setup.c
+++ b/arch/mips/gt64120/ev64120/setup.c
@@ -69,7 +69,7 @@ unsigned long __init prom_free_prom_memory(void)
  */
 extern void gt64120_time_init(void);
 
-static void __init ev64120_setup(void)
+void __init plat_setup(void)
 {
 	_machine_restart = galileo_machine_restart;
 	_machine_halt = galileo_machine_halt;
@@ -79,8 +79,6 @@ static void __init ev64120_setup(void)
 	set_io_port_base(KSEG1);
 }
 
-early_initcall(ev64120_setup);
-
 const char *get_system_type(void)
 {
 	return "Galileo EV64120A";
diff --git a/arch/mips/gt64120/momenco_ocelot/setup.c b/arch/mips/gt64120/momenco_ocelot/setup.c
index d610f8c17c81..0d07c33112d0 100644
--- a/arch/mips/gt64120/momenco_ocelot/setup.c
+++ b/arch/mips/gt64120/momenco_ocelot/setup.c
@@ -150,7 +150,7 @@ void PMON_v2_setup()
 	gt64120_base = 0xe0000000;
 }
 
-static void __init momenco_ocelot_setup(void)
+void __init plat_setup(void)
 {
 	void (*l3func)(unsigned long)=KSEG1ADDR(&setup_l3cache);
 	unsigned int tmpword;
@@ -307,8 +307,6 @@ static void __init momenco_ocelot_setup(void)
 	GT_WRITE(GT_DEV_B3_OFS, 0xfef73);
 }
 
-early_initcall(momenco_ocelot_setup);
-
 extern int rm7k_tcache_enabled;
 /*
  * This runs in KSEG1. See the verbiage in rm7k.c::probe_scache()
diff --git a/arch/mips/ite-boards/Kconfig b/arch/mips/ite-boards/Kconfig
new file mode 100644
index 000000000000..a6d59ad8f846
--- /dev/null
+++ b/arch/mips/ite-boards/Kconfig
@@ -0,0 +1,8 @@
+config IT8172_REVC
+	bool "Support for older IT8172 (Rev C)"
+	depends on MIPS_ITE8172
+	help
+	  Say Y here to support the older, Revision C version of the Integrated
+	  Technology Express, Inc. ITE8172 SBC.  Vendor page at
+	  <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
+	  board at <http://www.mvista.com/partners/semiconductor/ite.html>.
diff --git a/arch/mips/ite-boards/generic/irq.c b/arch/mips/ite-boards/generic/irq.c
index cb71b9024d6f..e67f96129491 100644
--- a/arch/mips/ite-boards/generic/irq.c
+++ b/arch/mips/ite-boards/generic/irq.c
@@ -138,14 +138,13 @@ static void end_ite_irq(unsigned int irq)
 }
 
 static struct hw_interrupt_type it8172_irq_type = {
-	"ITE8172",
-	startup_ite_irq,
-	shutdown_ite_irq,
-	enable_it8172_irq,
-	disable_it8172_irq,
-	mask_and_ack_ite_irq,
-	end_ite_irq,
-	NULL
+	.typename = "ITE8172",
+	.startup = startup_ite_irq,
+	.shutdown = shutdown_ite_irq,
+	.enable = enable_it8172_irq,
+	.disable = disable_it8172_irq,
+	.ack = mask_and_ack_ite_irq,
+	.end = end_ite_irq,
 };
 
 
@@ -159,13 +158,13 @@ static void ack_none(unsigned int irq) { }
 #define end_none	enable_none
 
 static struct hw_interrupt_type cp0_irq_type = {
-	"CP0 Count",
-	startup_none,
-	shutdown_none,
-	enable_none,
-	disable_none,
-	ack_none,
-	end_none
+	.typename = "CP0 Count",
+	.startup = startup_none,
+	.shutdown = shutdown_none,
+	.enable = enable_none,
+	.disable = disable_none,
+	.ack = ack_none,
+	.end = end_none
 };
 
 void enable_cpu_timer(void)
@@ -182,7 +181,6 @@ void __init arch_init_irq(void)
 	int i;
         unsigned long flags;
 
-        memset(irq_desc, 0, sizeof(irq_desc));
         set_except_vector(0, it8172_IRQ);
 
 	/* mask all interrupts */
diff --git a/arch/mips/ite-boards/generic/it8172_setup.c b/arch/mips/ite-boards/generic/it8172_setup.c
index a5f6d84bc181..062429dd7ca0 100644
--- a/arch/mips/ite-boards/generic/it8172_setup.c
+++ b/arch/mips/ite-boards/generic/it8172_setup.c
@@ -105,7 +105,7 @@ void __init it8172_init_ram_resource(unsigned long memsize)
 	it8172_resources.ram.end = memsize;
 }
 
-static void __init it8172_setup(void)
+void __init plat_setup(void)
 {
 	unsigned short dsr;
 	char *argptr;
@@ -251,8 +251,6 @@ static void __init it8172_setup(void)
 #endif /* CONFIG_IT8172_SCR1 */
 }
 
-early_initcall(it8172_setup);
-
 #ifdef CONFIG_SERIO_I8042
 /*
  * According to the ITE Special BIOS Note for waking up the
diff --git a/arch/mips/jazz/Kconfig b/arch/mips/jazz/Kconfig
new file mode 100644
index 000000000000..1f372b0d2559
--- /dev/null
+++ b/arch/mips/jazz/Kconfig
@@ -0,0 +1,33 @@
+config ACER_PICA_61
+	bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)"
+	depends on MACH_JAZZ && EXPERIMENTAL
+	select DMA_NONCOHERENT
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	help
+	  This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
+	  kernel that runs on these, say Y here. For details about Linux on
+	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+	  <http://www.linux-mips.org/>.
+
+config MIPS_MAGNUM_4000
+	bool "Support for MIPS Magnum 4000"
+	depends on MACH_JAZZ
+	select DMA_NONCOHERENT
+	select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	help
+	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
+	  kernel that runs on these, say Y here. For details about Linux on
+	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+	  <http://www.linux-mips.org/>.
+
+config OLIVETTI_M700
+	bool "Support for Olivetti M700-10"
+	depends on MACH_JAZZ
+	select DMA_NONCOHERENT
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	help
+	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
+	  kernel that runs on these, say Y here. For details about Linux on
+	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+	  <http://www.linux-mips.org/>.
diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c
index 0b608fa98d5a..b309b1bcf2e8 100644
--- a/arch/mips/jazz/irq.c
+++ b/arch/mips/jazz/irq.c
@@ -58,14 +58,13 @@ static void end_r4030_irq(unsigned int irq)
 }
 
 static struct hw_interrupt_type r4030_irq_type = {
-	"R4030",
-	startup_r4030_irq,
-	shutdown_r4030_irq,
-	enable_r4030_irq,
-	disable_r4030_irq,
-	mask_and_ack_r4030_irq,
-	end_r4030_irq,
-	NULL
+	.typename = "R4030",
+	.startup = startup_r4030_irq,
+	.shutdown = shutdown_r4030_irq,
+	.enable = enable_r4030_irq,
+	.disable = disable_r4030_irq,
+	.ack = mask_and_ack_r4030_irq,
+	.end = end_r4030_irq,
 };
 
 void __init init_r4030_ints(void)
diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c
index fccb06fe209d..044df9d4ab7c 100644
--- a/arch/mips/jazz/setup.c
+++ b/arch/mips/jazz/setup.c
@@ -50,7 +50,7 @@ static struct resource jazz_io_resources[] = {
 	{ "dma2", 0xc0, 0xdf, IORESOURCE_BUSY },
 };
 
-static void __init jazz_setup(void)
+void __init plat_setup(void)
 {
 	int i;
 
@@ -97,5 +97,3 @@ static void __init jazz_setup(void)
 
 	vdma_init();
 }
-
-early_initcall(jazz_setup);
diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c
index b9799b86fc79..7cbe14483f13 100644
--- a/arch/mips/jmr3927/rbhma3100/irq.c
+++ b/arch/mips/jmr3927/rbhma3100/irq.c
@@ -412,13 +412,13 @@ void __init arch_init_irq(void)
 }
 
 static hw_irq_controller jmr3927_irq_controller = {
-	"jmr3927_irq",
-	jmr3927_irq_startup,
-	jmr3927_irq_shutdown,
-	jmr3927_irq_enable,
-	jmr3927_irq_disable,
-	jmr3927_irq_ack,
-	jmr3927_irq_end,
+	.typename = "jmr3927_irq",
+	.startup = jmr3927_irq_startup,
+	.shutdown = jmr3927_irq_shutdown,
+	.enable = jmr3927_irq_enable,
+	.disable = jmr3927_irq_disable,
+	.ack = jmr3927_irq_ack,
+	.end = jmr3927_irq_end,
 };
 
 void jmr3927_irq_init(u32 irq_base)
diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c
index 32039bb2f440..3e2fbdc66097 100644
--- a/arch/mips/jmr3927/rbhma3100/setup.c
+++ b/arch/mips/jmr3927/rbhma3100/setup.c
@@ -44,6 +44,11 @@
 #include <linux/ioport.h>
 #include <linux/param.h>	/* for HZ */
 #include <linux/delay.h>
+#ifdef CONFIG_SERIAL_TXX9
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#endif
 
 #include <asm/addrspace.h>
 #include <asm/time.h>
@@ -193,7 +198,7 @@ static void jmr3927_board_init(void);
 extern struct resource pci_io_resource;
 extern struct resource pci_mem_resource;
 
-static void __init jmr3927_setup(void)
+void __init plat_setup(void)
 {
 	char *argptr;
 
@@ -211,8 +216,8 @@ static void __init jmr3927_setup(void)
 	 */
 	ioport_resource.start = pci_io_resource.start;
 	ioport_resource.end = pci_io_resource.end;
-	iomem_resource.start = pci_mem_resource.start;
-	iomem_resource.end = pci_mem_resource.end;
+	iomem_resource.start = 0;
+	iomem_resource.end = 0xffffffff;
 
 	/* Reboot on panic */
 	panic_timeout = 180;
@@ -265,18 +270,35 @@ static void __init jmr3927_setup(void)
 		strcat(argptr, " ip=bootp");
 	}
 
-#ifdef CONFIG_TXX927_SERIAL_CONSOLE
+#ifdef CONFIG_SERIAL_TXX9
+	{
+		extern int early_serial_txx9_setup(struct uart_port *port);
+		int i;
+		struct uart_port req;
+		for(i = 0; i < 2; i++) {
+			memset(&req, 0, sizeof(req));
+			req.line = i;
+			req.iotype = UPIO_MEM;
+			req.membase = (char *)TX3927_SIO_REG(i);
+			req.mapbase = TX3927_SIO_REG(i);
+			req.irq = i == 0 ?
+				JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
+			if (i == 0)
+				req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+			req.uartclk = JMR3927_IMCLK;
+			early_serial_txx9_setup(&req);
+		}
+	}
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
 	argptr = prom_getcmdline();
 	if ((argptr = strstr(argptr, "console=")) == NULL) {
 		argptr = prom_getcmdline();
 		strcat(argptr, " console=ttyS1,115200");
 	}
 #endif
+#endif
 }
 
-early_initcall(jmr3927_setup);
-
-
 static void tx3927_setup(void);
 
 #ifdef CONFIG_PCI
@@ -335,7 +357,7 @@ static void __init jmr3927_board_init(void)
 		       jmr3927_io_dipsw());
 }
 
-static void __init tx3927_setup(void)
+void __init plat_setup(void)
 {
 	int i;
 
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index d3303584fbd1..72f2126ad19d 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -11,11 +11,7 @@ obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
 binfmt_irix-objs	:= irixelf.o irixinv.o irixioctl.o irixsig.o	\
 			   irix5sys.o sysirix.o
 
-ifdef CONFIG_MODULES
-obj-y				+= mips_ksyms.o module.o
-obj-$(CONFIG_32BIT)		+= module-elf32.o
-obj-$(CONFIG_64BIT)		+= module-elf64.o
-endif
+obj-$(CONFIG_MODULES)		+= mips_ksyms.o module.o
 
 obj-$(CONFIG_CPU_R3000)		+= r2300_fpu.o r2300_switch.o
 obj-$(CONFIG_CPU_TX39XX)	+= r2300_fpu.o r2300_switch.o
@@ -38,12 +34,18 @@ obj-$(CONFIG_CPU_R6000)		+= r6000_fpu.o r4k_switch.o
 
 obj-$(CONFIG_SMP)		+= smp.o
 
+obj-$(CONFIG_MIPS_MT_SMP)	+= smp_mt.o
+
+obj-$(CONFIG_MIPS_VPE_LOADER)	+= vpe.o
+obj-$(CONFIG_MIPS_VPE_APSP_API)	+= rtlx.o
+
 obj-$(CONFIG_NO_ISA)		+= dma-no-isa.o
 obj-$(CONFIG_I8259)		+= i8259.o
 obj-$(CONFIG_IRQ_CPU)		+= irq_cpu.o
 obj-$(CONFIG_IRQ_CPU_RM7K)	+= irq-rm7000.o
 obj-$(CONFIG_IRQ_CPU_RM9K)	+= irq-rm9000.o
 obj-$(CONFIG_IRQ_MV64340)	+= irq-mv6434x.o
+obj-$(CONFIG_MIPS_BOARDS_GEN)	+= irq-msc01.o
 
 obj-$(CONFIG_32BIT)		+= scall32-o32.o
 obj-$(CONFIG_64BIT)		+= scall64-64.o
@@ -57,8 +59,6 @@ obj-$(CONFIG_PROC_FS)		+= proc.o
 
 obj-$(CONFIG_64BIT)		+= cpu-bugs64.o
 
-obj-$(CONFIG_GEN_RTC)		+= genrtc.o
-
 CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
 CFLAGS_ioctl32.o	+= -Ifs/
 
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index 2c11abb5a406..ca6b03c773be 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -95,6 +95,7 @@ void output_thread_info_defines(void)
 	offset("#define TI_PRE_COUNT       ", struct thread_info, preempt_count);
 	offset("#define TI_ADDR_LIMIT      ", struct thread_info, addr_limit);
 	offset("#define TI_RESTART_BLOCK   ", struct thread_info, restart_block);
+	offset("#define TI_TP_VALUE	   ", struct thread_info, tp_value);
 	constant("#define _THREAD_SIZE_ORDER ", THREAD_SIZE_ORDER);
 	constant("#define _THREAD_SIZE       ", THREAD_SIZE);
 	constant("#define _THREAD_MASK       ", THREAD_MASK);
@@ -240,6 +241,7 @@ void output_mm_defines(void)
 	linefeed;
 }
 
+#ifdef CONFIG_32BIT
 void output_sc_defines(void)
 {
 	text("/* Linux sigcontext offsets. */");
@@ -251,10 +253,29 @@ void output_sc_defines(void)
 	offset("#define SC_STATUS     ", struct sigcontext, sc_status);
 	offset("#define SC_FPC_CSR    ", struct sigcontext, sc_fpc_csr);
 	offset("#define SC_FPC_EIR    ", struct sigcontext, sc_fpc_eir);
-	offset("#define SC_CAUSE      ", struct sigcontext, sc_cause);
-	offset("#define SC_BADVADDR   ", struct sigcontext, sc_badvaddr);
+	offset("#define SC_HI1        ", struct sigcontext, sc_hi1);
+	offset("#define SC_LO1        ", struct sigcontext, sc_lo1);
+	offset("#define SC_HI2        ", struct sigcontext, sc_hi2);
+	offset("#define SC_LO2        ", struct sigcontext, sc_lo2);
+	offset("#define SC_HI3        ", struct sigcontext, sc_hi3);
+	offset("#define SC_LO3        ", struct sigcontext, sc_lo3);
 	linefeed;
 }
+#endif
+
+#ifdef CONFIG_64BIT
+void output_sc_defines(void)
+{
+	text("/* Linux sigcontext offsets. */");
+	offset("#define SC_REGS       ", struct sigcontext, sc_regs);
+	offset("#define SC_FPREGS     ", struct sigcontext, sc_fpregs);
+	offset("#define SC_MDHI       ", struct sigcontext, sc_hi);
+	offset("#define SC_MDLO       ", struct sigcontext, sc_lo);
+	offset("#define SC_PC         ", struct sigcontext, sc_pc);
+	offset("#define SC_FPC_CSR    ", struct sigcontext, sc_fpc_csr);
+	linefeed;
+}
+#endif
 
 #ifdef CONFIG_MIPS32_COMPAT
 void output_sc32_defines(void)
diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c
index 6b645fbb1ddc..d8e2674a1543 100644
--- a/arch/mips/kernel/binfmt_elfn32.c
+++ b/arch/mips/kernel/binfmt_elfn32.c
@@ -52,7 +52,6 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 
 #include <asm/processor.h>
 #include <linux/module.h>
-#include <linux/config.h>
 #include <linux/elfcore.h>
 #include <linux/compat.h>
 
@@ -116,4 +115,7 @@ MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)");
 #undef MODULE_DESCRIPTION
 #undef MODULE_AUTHOR
 
+#undef TASK_SIZE
+#define TASK_SIZE TASK_SIZE32
+
 #include "../../../fs/binfmt_elf.c"
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index b4075e99c452..cec5f327e360 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -54,7 +54,6 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 
 #include <asm/processor.h>
 #include <linux/module.h>
-#include <linux/config.h>
 #include <linux/elfcore.h>
 #include <linux/compat.h>
 
@@ -98,7 +97,7 @@ struct elf_prpsinfo32
 #define init_elf_binfmt init_elf32_binfmt
 
 #define jiffies_to_timeval jiffies_to_compat_timeval
-static __inline__ void
+static inline void
 jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
 {
 	/*
@@ -113,21 +112,26 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
 #undef ELF_CORE_COPY_REGS
 #define ELF_CORE_COPY_REGS(_dest,_regs) elf32_core_copy_regs(_dest,_regs);
 
-void elf32_core_copy_regs(elf_gregset_t _dest, struct pt_regs *_regs)
+void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs)
 {
 	int i;
 
-	memset(_dest, 0, sizeof(elf_gregset_t));
-
-	/* XXXKW the 6 is from EF_REG0 in gdb/gdb/mips-linux-tdep.c, include/asm-mips/reg.h */
-	for (i=6; i<38; i++)
-		_dest[i] = (elf_greg_t) _regs->regs[i-6];
-	_dest[i++] = (elf_greg_t) _regs->lo;
-	_dest[i++] = (elf_greg_t) _regs->hi;
-	_dest[i++] = (elf_greg_t) _regs->cp0_epc;
-	_dest[i++] = (elf_greg_t) _regs->cp0_badvaddr;
-	_dest[i++] = (elf_greg_t) _regs->cp0_status;
-	_dest[i++] = (elf_greg_t) _regs->cp0_cause;
+	for (i = 0; i < EF_R0; i++)
+		grp[i] = 0;
+	grp[EF_R0] = 0;
+	for (i = 1; i <= 31; i++)
+		grp[EF_R0 + i] = (elf_greg_t) regs->regs[i];
+	grp[EF_R26] = 0;
+	grp[EF_R27] = 0;
+	grp[EF_LO] = (elf_greg_t) regs->lo;
+	grp[EF_HI] = (elf_greg_t) regs->hi;
+	grp[EF_CP0_EPC] = (elf_greg_t) regs->cp0_epc;
+	grp[EF_CP0_BADVADDR] = (elf_greg_t) regs->cp0_badvaddr;
+	grp[EF_CP0_STATUS] = (elf_greg_t) regs->cp0_status;
+	grp[EF_CP0_CAUSE] = (elf_greg_t) regs->cp0_cause;
+#ifdef EF_UNUSED0
+	grp[EF_UNUSED0] = 0;
+#endif
 }
 
 MODULE_DESCRIPTION("Binary format loader for compatibility with o32 Linux/MIPS binaries");
@@ -136,4 +140,7 @@ MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)");
 #undef MODULE_DESCRIPTION
 #undef MODULE_AUTHOR
 
+#undef TASK_SIZE
+#define TASK_SIZE TASK_SIZE32
+
 #include "../../../fs/binfmt_elf.c"
diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index 01117e977a7f..374de839558d 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -12,6 +12,7 @@
 #include <asm/branch.h>
 #include <asm/cpu.h>
 #include <asm/cpu-features.h>
+#include <asm/fpu.h>
 #include <asm/inst.h>
 #include <asm/ptrace.h>
 #include <asm/uaccess.h>
@@ -21,7 +22,7 @@
  */
 int __compute_return_epc(struct pt_regs *regs)
 {
-	unsigned int *addr, bit, fcr31;
+	unsigned int *addr, bit, fcr31, dspcontrol;
 	long epc;
 	union mips_instruction insn;
 
@@ -98,6 +99,18 @@ int __compute_return_epc(struct pt_regs *regs)
 				epc += 8;
 			regs->cp0_epc = epc;
 			break;
+		case bposge32_op:
+			if (!cpu_has_dsp)
+				goto sigill;
+
+			dspcontrol = rddsp(0x01);
+
+			if (dspcontrol >= 32) {
+				epc = epc + 4 + (insn.i_format.simmediate << 2);
+			} else
+				epc += 8;
+			regs->cp0_epc = epc;
+			break;
 		}
 		break;
 
@@ -161,10 +174,13 @@ int __compute_return_epc(struct pt_regs *regs)
 	 * And now the FPA/cp1 branch instructions.
 	 */
 	case cop1_op:
-		if (!cpu_has_fpu)
-			fcr31 = current->thread.fpu.soft.fcr31;
-		else
+		preempt_disable();
+		if (is_fpu_owner())
 			asm volatile("cfc1\t%0,$31" : "=r" (fcr31));
+		else
+			fcr31 = current->thread.fpu.hard.fcr31;
+		preempt_enable();
+
 		bit = (insn.i_format.rt >> 2);
 		bit += (bit != 0);
 		bit += 23;
@@ -196,4 +212,9 @@ unaligned:
 	printk("%s: unaligned epc - sending SIGBUS.\n", current->comm);
 	force_sig(SIGBUS, current);
 	return -EFAULT;
+
+sigill:
+	printk("%s: DSP branch but not DSP ASE - sending SIGBUS.\n", current->comm);
+	force_sig(SIGBUS, current);
+	return -EFAULT;
 }
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 7685f8baf3f0..a263fb7a3971 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -2,9 +2,9 @@
  * Processor capabilities determination functions.
  *
  * Copyright (C) xxxx  the Anonymous
- * Copyright (C) 2003  Maciej W. Rozycki
+ * Copyright (C) 2003, 2004  Maciej W. Rozycki
  * Copyright (C) 1994 - 2003 Ralf Baechle
- * Copyright (C) 2001 MIPS Inc.
+ * Copyright (C) 2001, 2004  MIPS Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -17,7 +17,6 @@
 #include <linux/ptrace.h>
 #include <linux/stddef.h>
 
-#include <asm/bugs.h>
 #include <asm/cpu.h>
 #include <asm/fpu.h>
 #include <asm/mipsregs.h>
@@ -51,36 +50,48 @@ static void r4k_wait(void)
 		".set\tmips0");
 }
 
-/*
- * The Au1xxx wait is available only if we run CONFIG_PM and
- * the timer setup found we had a 32KHz counter available.
- * There are still problems with functions that may call au1k_wait
- * directly, but that will be discovered pretty quickly.
- */
-extern void (*au1k_wait_ptr)(void);
+/* The Au1xxx wait is available only if using 32khz counter or
+ * external timer source, but specifically not CP0 Counter. */
+int allow_au1k_wait;
 
-void au1k_wait(void)
+static void au1k_wait(void)
 {
-#ifdef CONFIG_PM
 	/* using the wait instruction makes CP0 counter unusable */
-	__asm__(".set\tmips3\n\t"
+	__asm__(".set mips3\n\t"
+		"cache 0x14, 0(%0)\n\t"
+		"cache 0x14, 32(%0)\n\t"
+		"sync\n\t"
+		"nop\n\t"
 		"wait\n\t"
 		"nop\n\t"
 		"nop\n\t"
 		"nop\n\t"
 		"nop\n\t"
-		".set\tmips0");
-#else
-	__asm__("nop\n\t"
-		"nop");
-#endif
+		".set mips0\n\t"
+		: : "r" (au1k_wait));
 }
 
+static int __initdata nowait = 0;
+
+int __init wait_disable(char *s)
+{
+	nowait = 1;
+
+	return 1;
+}
+
+__setup("nowait", wait_disable);
+
 static inline void check_wait(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 
 	printk("Checking for 'wait' instruction... ");
+	if (nowait) {
+		printk (" disabled.\n");
+		return;
+	}
+
 	switch (c->cputype) {
 	case CPU_R3081:
 	case CPU_R3081E:
@@ -109,22 +120,22 @@ static inline void check_wait(void)
 /*	case CPU_20KC:*/
 	case CPU_24K:
 	case CPU_25KF:
+	case CPU_34K:
+ 	case CPU_PR4450:
 		cpu_wait = r4k_wait;
 		printk(" available.\n");
 		break;
-#ifdef CONFIG_PM
 	case CPU_AU1000:
 	case CPU_AU1100:
 	case CPU_AU1500:
-		if (au1k_wait_ptr != NULL) {
-			cpu_wait = au1k_wait_ptr;
+	case CPU_AU1550:
+	case CPU_AU1200:
+		if (allow_au1k_wait) {
+			cpu_wait = au1k_wait;
 			printk(" available.\n");
-		}
-		else {
+		} else
 			printk(" unavailable.\n");
-		}
 		break;
-#endif
 	default:
 		printk(" unavailable.\n");
 		break;
@@ -180,7 +191,7 @@ static inline int __cpu_has_fpu(void)
 	return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE);
 }
 
-#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4KTLB \
+#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
 		| MIPS_CPU_COUNTER)
 
 static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
@@ -189,7 +200,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
 	case PRID_IMP_R2000:
 		c->cputype = CPU_R2000;
 		c->isa_level = MIPS_CPU_ISA_I;
-		c->options = MIPS_CPU_TLB | MIPS_CPU_NOFPUEX;
+		c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
+		             MIPS_CPU_NOFPUEX;
 		if (__cpu_has_fpu())
 			c->options |= MIPS_CPU_FPU;
 		c->tlbsize = 64;
@@ -203,7 +215,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
 		else
 			c->cputype = CPU_R3000;
 		c->isa_level = MIPS_CPU_ISA_I;
-		c->options = MIPS_CPU_TLB | MIPS_CPU_NOFPUEX;
+		c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
+		             MIPS_CPU_NOFPUEX;
 		if (__cpu_has_fpu())
 			c->options |= MIPS_CPU_FPU;
 		c->tlbsize = 64;
@@ -266,7 +279,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
 	case PRID_IMP_R4600:
 		c->cputype = CPU_R4600;
 		c->isa_level = MIPS_CPU_ISA_III;
-		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
+		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_LLSC;
 		c->tlbsize = 48;
 		break;
 	#if 0
@@ -285,7 +299,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
 	#endif
 	case PRID_IMP_TX39:
 		c->isa_level = MIPS_CPU_ISA_I;
-		c->options = MIPS_CPU_TLB;
+		c->options = MIPS_CPU_TLB | MIPS_CPU_TX39_CACHE;
 
 		if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) {
 			c->cputype = CPU_TX3927;
@@ -421,74 +435,147 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
 	}
 }
 
-static inline void decode_config1(struct cpuinfo_mips *c)
+static inline unsigned int decode_config0(struct cpuinfo_mips *c)
 {
-	unsigned long config0 = read_c0_config();
-	unsigned long config1;
+	unsigned int config0;
+	int isa;
+
+	config0 = read_c0_config();
 
-	if ((config0 & (1 << 31)) == 0)
-		return;			/* actually wort a panic() */
+	if (((config0 & MIPS_CONF_MT) >> 7) == 1)
+		c->options |= MIPS_CPU_TLB;
+	isa = (config0 & MIPS_CONF_AT) >> 13;
+	switch (isa) {
+	case 0:
+		c->isa_level = MIPS_CPU_ISA_M32;
+		break;
+	case 2:
+		c->isa_level = MIPS_CPU_ISA_M64;
+		break;
+	default:
+		panic("Unsupported ISA type, cp0.config0.at: %d.", isa);
+	}
+
+	return config0 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config1(struct cpuinfo_mips *c)
+{
+	unsigned int config1;
 
-	/* MIPS32 or MIPS64 compliant CPU. Read Config 1 register. */
-	c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
-		MIPS_CPU_4KTLB | MIPS_CPU_COUNTER | MIPS_CPU_DIVEC |
-		MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
 	config1 = read_c0_config1();
-	if (config1 & (1 << 3))
+
+	if (config1 & MIPS_CONF1_MD)
+		c->ases |= MIPS_ASE_MDMX;
+	if (config1 & MIPS_CONF1_WR)
 		c->options |= MIPS_CPU_WATCH;
-	if (config1 & (1 << 2))
-		c->options |= MIPS_CPU_MIPS16;
-	if (config1 & (1 << 1))
+	if (config1 & MIPS_CONF1_CA)
+		c->ases |= MIPS_ASE_MIPS16;
+	if (config1 & MIPS_CONF1_EP)
 		c->options |= MIPS_CPU_EJTAG;
-	if (config1 & 1) {
+	if (config1 & MIPS_CONF1_FP) {
 		c->options |= MIPS_CPU_FPU;
 		c->options |= MIPS_CPU_32FPR;
 	}
+	if (cpu_has_tlb)
+		c->tlbsize = ((config1 & MIPS_CONF1_TLBS) >> 25) + 1;
+
+	return config1 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config2(struct cpuinfo_mips *c)
+{
+	unsigned int config2;
+
+	config2 = read_c0_config2();
+
+	if (config2 & MIPS_CONF2_SL)
+		c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
+
+	return config2 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config3(struct cpuinfo_mips *c)
+{
+	unsigned int config3;
+
+	config3 = read_c0_config3();
+
+	if (config3 & MIPS_CONF3_SM)
+		c->ases |= MIPS_ASE_SMARTMIPS;
+	if (config3 & MIPS_CONF3_DSP)
+		c->ases |= MIPS_ASE_DSP;
+	if (config3 & MIPS_CONF3_VINT)
+		c->options |= MIPS_CPU_VINT;
+	if (config3 & MIPS_CONF3_VEIC)
+		c->options |= MIPS_CPU_VEIC;
+	if (config3 & MIPS_CONF3_MT)
+                c->ases |= MIPS_ASE_MIPSMT;
+
+	return config3 & MIPS_CONF_M;
+}
+
+static inline void decode_configs(struct cpuinfo_mips *c)
+{
+	/* MIPS32 or MIPS64 compliant CPU.  */
+	c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
+	             MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
+
 	c->scache.flags = MIPS_CACHE_NOT_PRESENT;
 
-	c->tlbsize = ((config1 >> 25) & 0x3f) + 1;
+	/* Read Config registers.  */
+	if (!decode_config0(c))
+		return;			/* actually worth a panic() */
+	if (!decode_config1(c))
+		return;
+	if (!decode_config2(c))
+		return;
+	if (!decode_config3(c))
+		return;
 }
 
 static inline void cpu_probe_mips(struct cpuinfo_mips *c)
 {
-	decode_config1(c);
+	decode_configs(c);
 	switch (c->processor_id & 0xff00) {
 	case PRID_IMP_4KC:
 		c->cputype = CPU_4KC;
-		c->isa_level = MIPS_CPU_ISA_M32;
 		break;
 	case PRID_IMP_4KEC:
 		c->cputype = CPU_4KEC;
-		c->isa_level = MIPS_CPU_ISA_M32;
+		break;
+	case PRID_IMP_4KECR2:
+		c->cputype = CPU_4KEC;
 		break;
 	case PRID_IMP_4KSC:
+	case PRID_IMP_4KSD:
 		c->cputype = CPU_4KSC;
-		c->isa_level = MIPS_CPU_ISA_M32;
 		break;
 	case PRID_IMP_5KC:
 		c->cputype = CPU_5KC;
-		c->isa_level = MIPS_CPU_ISA_M64;
 		break;
 	case PRID_IMP_20KC:
 		c->cputype = CPU_20KC;
-		c->isa_level = MIPS_CPU_ISA_M64;
 		break;
 	case PRID_IMP_24K:
+	case PRID_IMP_24KE:
 		c->cputype = CPU_24K;
-		c->isa_level = MIPS_CPU_ISA_M32;
 		break;
 	case PRID_IMP_25KF:
 		c->cputype = CPU_25KF;
-		c->isa_level = MIPS_CPU_ISA_M64;
 		/* Probe for L2 cache */
 		c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
 		break;
+	case PRID_IMP_34K:
+		c->cputype = CPU_34K;
+		c->isa_level = MIPS_CPU_ISA_M32;
+		break;
 	}
 }
 
 static inline void cpu_probe_alchemy(struct cpuinfo_mips *c)
 {
-	decode_config1(c);
+	decode_configs(c);
 	switch (c->processor_id & 0xff00) {
 	case PRID_IMP_AU1_REV1:
 	case PRID_IMP_AU1_REV2:
@@ -505,50 +592,70 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c)
 		case 3:
 			c->cputype = CPU_AU1550;
 			break;
+		case 4:
+			c->cputype = CPU_AU1200;
+			break;
 		default:
 			panic("Unknown Au Core!");
 			break;
 		}
-		c->isa_level = MIPS_CPU_ISA_M32;
 		break;
 	}
 }
 
 static inline void cpu_probe_sibyte(struct cpuinfo_mips *c)
 {
-	decode_config1(c);
+	decode_configs(c);
+
+	/*
+	 * For historical reasons the SB1 comes with it's own variant of
+	 * cache code which eventually will be folded into c-r4k.c.  Until
+	 * then we pretend it's got it's own cache architecture.
+	 */
+	c->options &= ~MIPS_CPU_4K_CACHE;
+	c->options |= MIPS_CPU_SB1_CACHE;
+
 	switch (c->processor_id & 0xff00) {
 	case PRID_IMP_SB1:
 		c->cputype = CPU_SB1;
-		c->isa_level = MIPS_CPU_ISA_M64;
-		c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
-		             MIPS_CPU_COUNTER | MIPS_CPU_DIVEC |
-		             MIPS_CPU_MCHECK | MIPS_CPU_EJTAG |
-		             MIPS_CPU_WATCH | MIPS_CPU_LLSC;
-#ifndef CONFIG_SB1_PASS_1_WORKAROUNDS
+#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
 		/* FPU in pass1 is known to have issues. */
-		c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR;
+		c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
 #endif
 		break;
+	case PRID_IMP_SB1A:
+		c->cputype = CPU_SB1A;
+		break;
 	}
 }
 
 static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c)
 {
-	decode_config1(c);
+	decode_configs(c);
 	switch (c->processor_id & 0xff00) {
 	case PRID_IMP_SR71000:
 		c->cputype = CPU_SR71000;
-		c->isa_level = MIPS_CPU_ISA_M64;
-		c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
-		             MIPS_CPU_4KTLB | MIPS_CPU_FPU |
-		             MIPS_CPU_COUNTER | MIPS_CPU_MCHECK;
 		c->scache.ways = 8;
 		c->tlbsize = 64;
 		break;
 	}
 }
 
+static inline void cpu_probe_philips(struct cpuinfo_mips *c)
+{
+	decode_configs(c);
+	switch (c->processor_id & 0xff00) {
+	case PRID_IMP_PR4450:
+		c->cputype = CPU_PR4450;
+		c->isa_level = MIPS_CPU_ISA_M32;
+		break;
+	default:
+		panic("Unknown Philips Core!"); /* REVISIT: die? */
+		break;
+	}
+}
+
+
 __init void cpu_probe(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -571,15 +678,24 @@ __init void cpu_probe(void)
 	case PRID_COMP_SIBYTE:
 		cpu_probe_sibyte(c);
 		break;
-
 	case PRID_COMP_SANDCRAFT:
 		cpu_probe_sandcraft(c);
 		break;
+ 	case PRID_COMP_PHILIPS:
+		cpu_probe_philips(c);
+ 		break;
 	default:
 		c->cputype = CPU_UNKNOWN;
 	}
-	if (c->options & MIPS_CPU_FPU)
+	if (c->options & MIPS_CPU_FPU) {
 		c->fpu_id = cpu_get_fpu_id();
+
+		if (c->isa_level == MIPS_CPU_ISA_M32 ||
+		    c->isa_level == MIPS_CPU_ISA_M64) {
+			if (c->fpu_id & MIPS_FPIR_3D)
+				c->ases |= MIPS_ASE_MIPS3D;
+		}
+	}
 }
 
 __init void cpu_report(void)
diff --git a/arch/mips/kernel/dma-no-isa.c b/arch/mips/kernel/dma-no-isa.c
new file mode 100644
index 000000000000..6df8b07741e3
--- /dev/null
+++ b/arch/mips/kernel/dma-no-isa.c
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 by Ralf Baechle
+ *
+ * Dummy ISA DMA functions for systems that don't have ISA but share drivers
+ * with ISA such as legacy free PCI.
+ */
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+
+DEFINE_SPINLOCK(dma_spin_lock);
+
+int request_dma(unsigned int dmanr, const char * device_id)
+{
+	return -EINVAL;
+}
+
+void free_dma(unsigned int dmanr)
+{
+}
+
+EXPORT_SYMBOL(dma_spin_lock);
+EXPORT_SYMBOL(request_dma);
+EXPORT_SYMBOL(free_dma);
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index 5eb429137e06..83c87fe4ee4f 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -19,11 +19,11 @@
 #include <asm/war.h>
 
 #ifdef CONFIG_PREEMPT
-	.macro	preempt_stop reg=t0
+	.macro	preempt_stop
 	.endm
 #else
-	.macro	preempt_stop reg=t0
-	local_irq_disable \reg
+	.macro	preempt_stop
+	local_irq_disable
 	.endm
 #define resume_kernel	restore_all
 #endif
@@ -37,17 +37,18 @@ FEXPORT(ret_from_irq)
 	andi	t0, t0, KU_USER
 	beqz	t0, resume_kernel
 
-FEXPORT(resume_userspace)
-	local_irq_disable	t0	# make sure we dont miss an
+resume_userspace:
+	local_irq_disable		# make sure we dont miss an
 					# interrupt setting need_resched
 					# between sampling and return
 	LONG_L	a2, TI_FLAGS($28)	# current->work
-	andi	a2, _TIF_WORK_MASK	# (ignoring syscall_trace)
-	bnez	a2, work_pending
+	andi	t0, a2, _TIF_WORK_MASK	# (ignoring syscall_trace)
+	bnez	t0, work_pending
 	j	restore_all
 
 #ifdef CONFIG_PREEMPT
-ENTRY(resume_kernel)
+resume_kernel:
+	local_irq_disable
 	lw	t0, TI_PRE_COUNT($28)
 	bnez	t0, restore_all
 need_resched:
@@ -57,12 +58,7 @@ need_resched:
 	LONG_L	t0, PT_STATUS(sp)		# Interrupts off?
 	andi	t0, 1
 	beqz	t0, restore_all
-	li	t0, PREEMPT_ACTIVE
-	sw	t0, TI_PRE_COUNT($28)
-	local_irq_enable t0
-	jal	schedule
-	sw	zero, TI_PRE_COUNT($28)
-	local_irq_disable t0
+	jal	preempt_schedule_irq
 	b	need_resched
 #endif
 
@@ -88,13 +84,13 @@ FEXPORT(restore_partial)		# restore partial frame
 	RESTORE_SP_AND_RET
 	.set	at
 
-FEXPORT(work_pending)
-	andi	t0, a2, _TIF_NEED_RESCHED
+work_pending:
+	andi	t0, a2, _TIF_NEED_RESCHED # a2 is preloaded with TI_FLAGS
 	beqz	t0, work_notifysig
 work_resched:
 	jal	schedule
 
-	local_irq_disable t0		# make sure need_resched and
+	local_irq_disable		# make sure need_resched and
 					# signals dont change between
 					# sampling and return
 	LONG_L	a2, TI_FLAGS($28)
@@ -109,15 +105,14 @@ work_notifysig:				# deal with pending signals and
 	move	a0, sp
 	li	a1, 0
 	jal	do_notify_resume	# a2 already loaded
-	j	restore_all
+	j	resume_userspace
 
 FEXPORT(syscall_exit_work_partial)
 	SAVE_STATIC
-FEXPORT(syscall_exit_work)
-	LONG_L	t0, TI_FLAGS($28)
-	li	t1, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
-	and	t0, t1
-	beqz	t0, work_pending	# trace bit is set
+syscall_exit_work:
+	li	t0, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
+	and	t0, a2			# a2 is preloaded with TI_FLAGS
+	beqz	t0, work_pending	# trace bit set?
 	local_irq_enable		# could let do_syscall_trace()
 					# call schedule() instead
 	move	a0, sp
@@ -128,28 +123,25 @@ FEXPORT(syscall_exit_work)
 /*
  * Common spurious interrupt handler.
  */
-	.text
-	.align  5
 LEAF(spurious_interrupt)
 	/*
 	 * Someone tried to fool us by sending an interrupt but we
 	 * couldn't find a cause for it.
 	 */
+	PTR_LA	t1, irq_err_count
 #ifdef CONFIG_SMP
-	lui     t1, %hi(irq_err_count)
-1:	ll      t0, %lo(irq_err_count)(t1)
+1:	ll      t0, (t1)
 	addiu   t0, 1
-	sc      t0, %lo(irq_err_count)(t1)
+	sc      t0, (t1)
 #if R10000_LLSC_WAR
 	beqzl	t0, 1b
 #else
 	beqz	t0, 1b
 #endif
 #else
-	lui     t1, %hi(irq_err_count)
-	lw      t0, %lo(irq_err_count)(t1)
+	lw      t0, (t1)
 	addiu   t0, 1
-	sw      t0, %lo(irq_err_count)(t1)
+	sw      t0, (t1)
 #endif
 	j	ret_from_irq
 	END(spurious_interrupt)
diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S
index 512bedbfa7b9..83b8986f9401 100644
--- a/arch/mips/kernel/gdb-low.S
+++ b/arch/mips/kernel/gdb-low.S
@@ -52,16 +52,15 @@
 		/*
 		 * Called from user mode, go somewhere else.
 		 */
-		lui	k1, %hi(saved_vectors)
 		mfc0	k0, CP0_CAUSE
 		andi	k0, k0, 0x7c
 		add	k1, k1, k0
-		lw	k0, %lo(saved_vectors)(k1)
+		PTR_L	k0, saved_vectors(k1)
 		jr	k0
 		nop
 1:
 		move	k0, sp
-		subu	sp, k1, GDB_FR_SIZE*2	# see comment above
+		PTR_SUBU sp, k1, GDB_FR_SIZE*2	# see comment above
 		LONG_S	k0, GDB_FR_REG29(sp)
 		LONG_S	$2, GDB_FR_REG2(sp)
 
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
index d3fd1ab14274..96d18c43dca0 100644
--- a/arch/mips/kernel/gdb-stub.c
+++ b/arch/mips/kernel/gdb-stub.c
@@ -176,8 +176,10 @@ int kgdb_enabled;
 /*
  * spin locks for smp case
  */
-static spinlock_t kgdb_lock = SPIN_LOCK_UNLOCKED;
-static spinlock_t kgdb_cpulock[NR_CPUS] = { [0 ... NR_CPUS-1] = SPIN_LOCK_UNLOCKED};
+static DEFINE_SPINLOCK(kgdb_lock);
+static raw_spinlock_t kgdb_cpulock[NR_CPUS] = {
+	[0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED;
+};
 
 /*
  * BUFMAX defines the maximum number of characters in inbound/outbound buffers
@@ -637,29 +639,32 @@ static struct gdb_bp_save async_bp;
  * and only one can be active at a time.
  */
 extern spinlock_t smp_call_lock;
+
 void set_async_breakpoint(unsigned long *epc)
 {
 	/* skip breaking into userland */
 	if ((*epc & 0x80000000) == 0)
 		return;
 
+#ifdef CONFIG_SMP
 	/* avoid deadlock if someone is make IPC */
 	if (spin_is_locked(&smp_call_lock))
 		return;
+#endif
 
 	async_bp.addr = *epc;
 	*epc = (unsigned long)async_breakpoint;
 }
 
-void kgdb_wait(void *arg)
+static void kgdb_wait(void *arg)
 {
 	unsigned flags;
 	int cpu = smp_processor_id();
 
 	local_irq_save(flags);
 
-	spin_lock(&kgdb_cpulock[cpu]);
-	spin_unlock(&kgdb_cpulock[cpu]);
+	__raw_spin_lock(&kgdb_cpulock[cpu]);
+	__raw_spin_unlock(&kgdb_cpulock[cpu]);
 
 	local_irq_restore(flags);
 }
@@ -707,7 +712,7 @@ void handle_exception (struct gdb_regs *regs)
 	 * acquire the CPU spinlocks
 	 */
 	for (i = num_online_cpus()-1; i >= 0; i--)
-		if (spin_trylock(&kgdb_cpulock[i]) == 0)
+		if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0)
 			panic("kgdb: couldn't get cpulock %d\n", i);
 
 	/*
@@ -982,7 +987,7 @@ finish_kgdb:
 exit_kgdb_exception:
 	/* release locks so other CPUs can go */
 	for (i = num_online_cpus()-1; i >= 0; i--)
-		spin_unlock(&kgdb_cpulock[i]);
+		__raw_spin_unlock(&kgdb_cpulock[i]);
 	spin_unlock(&kgdb_lock);
 
 	__flush_cache_all();
@@ -1036,12 +1041,12 @@ void adel(void)
  * malloc is needed by gdb client in "call func()", even a private one
  * will make gdb happy
  */
-static void *malloc(size_t size)
+static void * __attribute_used__ malloc(size_t size)
 {
 	return kmalloc(size, GFP_ATOMIC);
 }
 
-static void free(void *where)
+static void __attribute_used__ free (void *where)
 {
 	kfree(where);
 }
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index e7f6c1b90806..aa18a8b7b380 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -82,7 +82,7 @@ NESTED(except_vec3_r4000, 0, sp)
 	 li	k0, 14<<2
 	beq	k1, k0, handle_vcei
 #ifdef CONFIG_64BIT
-	dsll	k1, k1, 1
+	 dsll	k1, k1, 1
 #endif
 	.set	pop
 	PTR_L	k0, exception_handlers(k1)
@@ -90,17 +90,17 @@ NESTED(except_vec3_r4000, 0, sp)
 
 	/*
 	 * Big shit, we now may have two dirty primary cache lines for the same
-	 * physical address.  We can savely invalidate the line pointed to by
+	 * physical address.  We can safely invalidate the line pointed to by
 	 * c0_badvaddr because after return from this exception handler the
 	 * load / store will be re-executed.
 	 */
 handle_vced:
-	DMFC0	k0, CP0_BADVADDR
+	MFC0	k0, CP0_BADVADDR
 	li	k1, -4					# Is this ...
 	and	k0, k1					# ... really needed?
 	mtc0	zero, CP0_TAGLO
-	cache	Index_Store_Tag_D,(k0)
-	cache	Hit_Writeback_Inv_SD,(k0)
+	cache	Index_Store_Tag_D, (k0)
+	cache	Hit_Writeback_Inv_SD, (k0)
 #ifdef CONFIG_PROC_FS
 	PTR_LA	k0, vced_count
 	lw	k1, (k0)
@@ -148,6 +148,38 @@ NESTED(except_vec_ejtag_debug, 0, sp)
 	__FINIT
 
 /*
+ * Vectored interrupt handler.
+ * This prototype is copied to ebase + n*IntCtl.VS and patched
+ * to invoke the handler
+ */
+NESTED(except_vec_vi, 0, sp)
+	SAVE_SOME
+	SAVE_AT
+	.set	push
+	.set	noreorder
+EXPORT(except_vec_vi_lui)
+	lui	v0, 0		/* Patched */
+	j	except_vec_vi_handler
+EXPORT(except_vec_vi_ori)
+	 ori	v0, 0		/* Patched */
+	.set	pop
+	END(except_vec_vi)
+EXPORT(except_vec_vi_end)
+
+/*
+ * Common Vectored Interrupt code
+ * Complete the register saves and invoke the handler which is passed in $v0
+ */
+NESTED(except_vec_vi_handler, 0, sp)
+	SAVE_TEMP
+	SAVE_STATIC
+	CLI
+	move	a0, sp
+	jalr	v0
+	j	ret_from_irq
+	END(except_vec_vi_handler)
+
+/*
  * EJTAG debug exception handler.
  */
 NESTED(ejtag_debug_handler, PT_SIZE, sp)
@@ -291,6 +323,8 @@ NESTED(nmi_handler, PT_SIZE, sp)
 	BUILD_HANDLER mdmx mdmx sti silent		/* #22 */
 	BUILD_HANDLER watch watch sti verbose		/* #23 */
 	BUILD_HANDLER mcheck mcheck cli verbose		/* #24 */
+	BUILD_HANDLER mt mt sti verbose			/* #25 */
+	BUILD_HANDLER dsp dsp sti silent		/* #26 */
 	BUILD_HANDLER reserved reserved sti verbose	/* others */
 
 #ifdef CONFIG_64BIT
diff --git a/arch/mips/kernel/genrtc.c b/arch/mips/kernel/genrtc.c
deleted file mode 100644
index 71416e7bbbaa..000000000000
--- a/arch/mips/kernel/genrtc.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * A glue layer that provides RTC read/write to drivers/char/genrtc.c driver
- * based on MIPS internal RTC routines.  It does take care locking
- * issues so that we are SMP/Preemption safe.
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * Please read the COPYING file for all license details.
- */
-
-#include <linux/spinlock.h>
-
-#include <asm/rtc.h>
-#include <asm/time.h>
-
-static DEFINE_SPINLOCK(mips_rtc_lock);
-
-unsigned int get_rtc_time(struct rtc_time *time)
-{
-	unsigned long nowtime;
-
-	spin_lock(&mips_rtc_lock);
-	nowtime = rtc_get_time();
-	to_tm(nowtime, time);
-	time->tm_year -= 1900;
-	spin_unlock(&mips_rtc_lock);
-
-	return RTC_24H;
-}
-
-int set_rtc_time(struct rtc_time *time)
-{
-	unsigned long nowtime;
-	int ret;
-
-	spin_lock(&mips_rtc_lock);
-	nowtime = mktime(time->tm_year+1900, time->tm_mon+1,
-			time->tm_mday, time->tm_hour, time->tm_min,
-			time->tm_sec);
-	ret = rtc_set_time(nowtime);
-	spin_unlock(&mips_rtc_lock);
-
-	return ret;
-}
-
-unsigned int get_rtc_ss(void)
-{
-	struct rtc_time h;
-
-	get_rtc_time(&h);
-	return h.tm_sec;
-}
-
-int get_rtc_pll(struct rtc_pll_info *pll)
-{
-	return -EINVAL;
-}
-
-int set_rtc_pll(struct rtc_pll_info *pll)
-{
-	return -EINVAL;
-}
-
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 2a1b45d66f04..2e9122a4213a 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -22,11 +22,8 @@
 #include <asm/page.h>
 #include <asm/mipsregs.h>
 #include <asm/stackframe.h>
-#ifdef CONFIG_SGI_IP27
-#include <asm/sn/addrs.h>
-#include <asm/sn/sn0/hubni.h>
-#include <asm/sn/klkernvars.h>
-#endif
+
+#include <kernel-entry-init.h>
 
 	.macro	ARC64_TWIDDLE_PC
 #if defined(CONFIG_ARC64) || defined(CONFIG_MAPPED_KERNEL)
@@ -38,18 +35,6 @@
 #endif
 	.endm
 
-#ifdef CONFIG_SGI_IP27
-	/*
-	 * outputs the local nasid into res.  IP27 stuff.
-	 */
-	.macro GET_NASID_ASM res
-	dli	\res, LOCAL_HUB_ADDR(NI_STATUS_REV_ID)
-	ld	\res, (\res)
-	and	\res, NSRI_NODEID_MASK
-	dsrl	\res, NSRI_NODEID_SHFT
-	.endm
-#endif /* CONFIG_SGI_IP27 */
-
 	/*
 	 * inputs are the text nasid in t1, data nasid in t2.
 	 */
@@ -131,16 +116,21 @@
 EXPORT(stext)					# used for profiling
 EXPORT(_stext)
 
+#if defined(CONFIG_QEMU) || defined(CONFIG_MIPS_SIM)
+	/*
+	 * Give us a fighting chance of running if execution beings at the
+	 * kernel load address.  This is needed because this platform does
+	 * not have a ELF loader yet.
+	 */
+	j	kernel_entry
+#endif
 	__INIT
 
 NESTED(kernel_entry, 16, sp)			# kernel entry point
-	setup_c0_status_pri
 
-#ifdef CONFIG_SGI_IP27
-	GET_NASID_ASM	t1
-	move	t2, t1				# text and data are here
-	MAPPED_KERNEL_SETUP_TLB
-#endif /* IP27 */
+	kernel_entry_setup			# cpu specific setup
+
+	setup_c0_status_pri
 
 	ARC64_TWIDDLE_PC
 
@@ -157,6 +147,7 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
 	LONG_S		a2, fw_arg2
 	LONG_S		a3, fw_arg3
 
+	MTC0		zero, CP0_CONTEXT	# clear context register
 	PTR_LA		$28, init_thread_union
 	PTR_ADDIU	sp, $28, _THREAD_SIZE - 32
 	set_saved_sp	sp, t0, t1
@@ -165,6 +156,10 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
 	j		start_kernel
 	END(kernel_entry)
 
+#ifdef CONFIG_QEMU
+	__INIT
+#endif
+
 #ifdef CONFIG_SMP
 /*
  * SMP slave cpus entry point.  Board specific code for bootstrap calls this
@@ -172,20 +167,7 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
  */
 NESTED(smp_bootstrap, 16, sp)
 	setup_c0_status_sec
-
-#ifdef CONFIG_SGI_IP27
-	GET_NASID_ASM	t1
-	dli	t0, KLDIR_OFFSET + (KLI_KERN_VARS * KLDIR_ENT_SIZE) + \
-		    KLDIR_OFF_POINTER + CAC_BASE
-	dsll	t1, NASID_SHFT
-	or	t0, t0, t1
-	ld	t0, 0(t0)			# t0 points to kern_vars struct
-	lh	t1, KV_RO_NASID_OFFSET(t0)
-	lh	t2, KV_RW_NASID_OFFSET(t0)
-	MAPPED_KERNEL_SETUP_TLB
-	ARC64_TWIDDLE_PC
-#endif /* CONFIG_SGI_IP27 */
-
+	smp_slave_setup
 	j	start_secondary
 	END(smp_bootstrap)
 #endif /* CONFIG_SMP */
@@ -200,19 +182,13 @@ NESTED(smp_bootstrap, 16, sp)
 	.comm	fw_arg2, SZREG, SZREG
 	.comm	fw_arg3, SZREG, SZREG
 
-	.macro	page name, order=0
-	.globl	\name
-\name:	.size	\name, (_PAGE_SIZE << \order)
-	.org	. + (_PAGE_SIZE << \order)
-	.type	\name, @object
+	.macro page name, order
+	.comm	\name, (_PAGE_SIZE << \order), (_PAGE_SIZE << \order)
 	.endm
 
-	.data
-	.align	PAGE_SHIFT
-
 	/*
-	 * ... but on 64-bit we've got three-level pagetables with a
-	 * slightly different layout ...
+	 * On 64-bit we've got three-level pagetables with a slightly
+	 * different layout ...
 	 */
 	page	swapper_pg_dir, _PGD_ORDER
 #ifdef CONFIG_64BIT
diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c
index 447759201d1d..b974ac9057f6 100644
--- a/arch/mips/kernel/i8259.c
+++ b/arch/mips/kernel/i8259.c
@@ -31,7 +31,7 @@ void disable_8259A_irq(unsigned int irq);
  * moves to arch independent land
  */
 
-spinlock_t DEFINE_SPINLOCK(i8259A_lock);
+DEFINE_SPINLOCK(i8259A_lock);
 
 static void end_8259A_irq (unsigned int irq)
 {
@@ -52,14 +52,13 @@ static unsigned int startup_8259A_irq(unsigned int irq)
 }
 
 static struct hw_interrupt_type i8259A_irq_type = {
-	"XT-PIC",
-	startup_8259A_irq,
-	shutdown_8259A_irq,
-	enable_8259A_irq,
-	disable_8259A_irq,
-	mask_and_ack_8259A,
-	end_8259A_irq,
-	NULL
+	.typename = "XT-PIC",
+	.startup = startup_8259A_irq,
+	.shutdown = shutdown_8259A_irq,
+	.enable = enable_8259A_irq,
+	.disable = disable_8259A_irq,
+	.ack = mask_and_ack_8259A,
+	.end = end_8259A_irq,
 };
 
 /*
@@ -308,7 +307,7 @@ static struct resource pic2_io_resource = {
 
 /*
  * On systems with i8259-style interrupt controllers we assume for
- * driver compatibility reasons interrupts 0 - 15 to be the i8295
+ * driver compatibility reasons interrupts 0 - 15 to be the i8259
  * interrupts even if the hardware uses a different interrupt numbering.
  */
 void __init init_i8259_irqs (void)
@@ -322,7 +321,7 @@ void __init init_i8259_irqs (void)
 
 	for (i = 0; i < 16; i++) {
 		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = 0;
+		irq_desc[i].action = NULL;
 		irq_desc[i].depth = 1;
 		irq_desc[i].handler = &i8259A_irq_type;
 	}
diff --git a/arch/mips/kernel/ioctl32.c b/arch/mips/kernel/ioctl32.c
index c069719ff0d8..ed9b2da510be 100644
--- a/arch/mips/kernel/ioctl32.c
+++ b/arch/mips/kernel/ioctl32.c
@@ -41,12 +41,6 @@ IOCTL_TABLE_START
 #define DECLARES
 #include "compat_ioctl.c"
 
-#ifdef CONFIG_SIBYTE_TBPROF
-COMPATIBLE_IOCTL(SBPROF_ZBSTART)
-COMPATIBLE_IOCTL(SBPROF_ZBSTOP)
-COMPATIBLE_IOCTL(SBPROF_ZBWAITFULL)
-#endif /* CONFIG_SIBYTE_TBPROF */
-
 /*HANDLE_IOCTL(RTC_IRQP_READ, w_long)
 COMPATIBLE_IOCTL(RTC_IRQP_SET)
 HANDLE_IOCTL(RTC_EPOCH_READ, w_long)
diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c
index 4af20cd91f9f..10d3644e3608 100644
--- a/arch/mips/kernel/irixelf.c
+++ b/arch/mips/kernel/irixelf.c
@@ -8,7 +8,7 @@
  *
  * Copyright (C) 1993 - 1994 Eric Youngdale <ericy@cais.com>
  * Copyright (C) 1996 - 2004 David S. Miller <dm@engr.sgi.com>
- * Copyright (C) 2004 Steven J. Hill <sjhill@realitydiluted.com>
+ * Copyright (C) 2004 - 2005 Steven J. Hill <sjhill@realitydiluted.com>
  */
 #include <linux/module.h>
 #include <linux/fs.h>
@@ -31,15 +31,16 @@
 #include <linux/elfcore.h>
 #include <linux/smp_lock.h>
 
-#include <asm/uaccess.h>
 #include <asm/mipsregs.h>
+#include <asm/namei.h>
 #include <asm/prctl.h>
+#include <asm/uaccess.h>
 
 #define DLINFO_ITEMS 12
 
 #include <linux/elf.h>
 
-#undef DEBUG_ELF
+#undef DEBUG
 
 static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs);
 static int load_irix_library(struct file *);
@@ -55,7 +56,7 @@ static struct linux_binfmt irix_format = {
 #define elf_addr_t unsigned long
 #endif
 
-#ifdef DEBUG_ELF
+#ifdef DEBUG
 /* Debugging routines. */
 static char *get_elf_p_type(Elf32_Word p_type)
 {
@@ -120,7 +121,7 @@ static void dump_phdrs(struct elf_phdr *ep, int pnum)
 			print_phdr(i, ep);
 	}
 }
-#endif /* (DEBUG_ELF) */
+#endif /* DEBUG */
 
 static void set_brk(unsigned long start, unsigned long end)
 {
@@ -146,20 +147,20 @@ static void padzero(unsigned long elf_bss)
 	nbyte = elf_bss & (PAGE_SIZE-1);
 	if (nbyte) {
 		nbyte = PAGE_SIZE - nbyte;
-		clear_user((void *) elf_bss, nbyte);
+		clear_user((void __user *) elf_bss, nbyte);
 	}
 }
 
-unsigned long * create_irix_tables(char * p, int argc, int envc,
-				   struct elfhdr * exec, unsigned int load_addr,
-				   unsigned int interp_load_addr,
-				   struct pt_regs *regs, struct elf_phdr *ephdr)
+static unsigned long * create_irix_tables(char * p, int argc, int envc,
+	struct elfhdr * exec, unsigned int load_addr,
+	unsigned int interp_load_addr, struct pt_regs *regs,
+	struct elf_phdr *ephdr)
 {
 	elf_addr_t *argv;
 	elf_addr_t *envp;
 	elf_addr_t *sp, *csp;
 
-#ifdef DEBUG_ELF
+#ifdef DEBUG
 	printk("create_irix_tables: p[%p] argc[%d] envc[%d] "
 	       "load_addr[%08x] interp_load_addr[%08x]\n",
 	       p, argc, envc, load_addr, interp_load_addr);
@@ -248,14 +249,13 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex,
 	last_bss = 0;
 	error = load_addr = 0;
 
-#ifdef DEBUG_ELF
+#ifdef DEBUG
 	print_elfhdr(interp_elf_ex);
 #endif
 
 	/* First of all, some simple consistency checks */
 	if ((interp_elf_ex->e_type != ET_EXEC &&
 	     interp_elf_ex->e_type != ET_DYN) ||
-	     !irix_elf_check_arch(interp_elf_ex) ||
 	     !interpreter->f_op->mmap) {
 		printk("IRIX interp has bad e_type %d\n", interp_elf_ex->e_type);
 		return 0xffffffff;
@@ -290,7 +290,7 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex,
 			   (char *) elf_phdata,
 			   sizeof(struct elf_phdr) * interp_elf_ex->e_phnum);
 
-#ifdef DEBUG_ELF
+#ifdef DEBUG
 	dump_phdrs(elf_phdata, interp_elf_ex->e_phnum);
 #endif
 
@@ -306,13 +306,11 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex,
 	    elf_type |= MAP_FIXED;
 	    vaddr = eppnt->p_vaddr;
 
-#ifdef DEBUG_ELF
-	    printk("INTERP do_mmap(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ",
+	    pr_debug("INTERP do_mmap(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ",
 		   interpreter, vaddr,
 		   (unsigned long) (eppnt->p_filesz + (eppnt->p_vaddr & 0xfff)),
 		   (unsigned long) elf_prot, (unsigned long) elf_type,
 		   (unsigned long) (eppnt->p_offset & 0xfffff000));
-#endif
 	    down_write(&current->mm->mmap_sem);
 	    error = do_mmap(interpreter, vaddr,
 			    eppnt->p_filesz + (eppnt->p_vaddr & 0xfff),
@@ -324,14 +322,10 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex,
 		    printk("Aieee IRIX interp mmap error=%d\n", error);
 		    break;  /* Real error */
 	    }
-#ifdef DEBUG_ELF
-	    printk("error=%08lx ", (unsigned long) error);
-#endif
+	    pr_debug("error=%08lx ", (unsigned long) error);
 	    if(!load_addr && interp_elf_ex->e_type == ET_DYN) {
 	      load_addr = error;
-#ifdef DEBUG_ELF
-              printk("load_addr = error ");
-#endif
+              pr_debug("load_addr = error ");
 	    }
 
 	    /* Find the end of the file  mapping for this phdr, and keep
@@ -345,17 +339,13 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex,
 	     */
 	    k = eppnt->p_memsz + eppnt->p_vaddr;
 	    if(k > last_bss) last_bss = k;
-#ifdef DEBUG_ELF
-	    printk("\n");
-#endif
+	    pr_debug("\n");
 	  }
 	}
 
 	/* Now use mmap to map the library into memory. */
 	if(error < 0 && error > -1024) {
-#ifdef DEBUG_ELF
-		printk("got error %d\n", error);
-#endif
+		pr_debug("got error %d\n", error);
 		kfree(elf_phdata);
 		return 0xffffffff;
 	}
@@ -365,16 +355,12 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex,
 	 * that there are zero-mapped pages up to and including the
 	 * last bss page.
 	 */
-#ifdef DEBUG_ELF
-	printk("padzero(%08lx) ", (unsigned long) (elf_bss));
-#endif
+	pr_debug("padzero(%08lx) ", (unsigned long) (elf_bss));
 	padzero(elf_bss);
 	len = (elf_bss + 0xfff) & 0xfffff000; /* What we have mapped so far */
 
-#ifdef DEBUG_ELF
-	printk("last_bss[%08lx] len[%08lx]\n", (unsigned long) last_bss,
-	       (unsigned long) len);
-#endif
+	pr_debug("last_bss[%08lx] len[%08lx]\n", (unsigned long) last_bss,
+	         (unsigned long) len);
 
 	/* Map the last of the bss segment */
 	if (last_bss > len) {
@@ -396,12 +382,7 @@ static int verify_binary(struct elfhdr *ehp, struct linux_binprm *bprm)
 
 	/* First of all, some simple consistency checks */
 	if((ehp->e_type != ET_EXEC && ehp->e_type != ET_DYN) ||
-	    !irix_elf_check_arch(ehp) || !bprm->file->f_op->mmap) {
-		return -ENOEXEC;
-	}
-
-	/* Only support MIPS ARCH2 or greater IRIX binaries for now. */
-	if(!(ehp->e_flags & EF_MIPS_ARCH) && !(ehp->e_flags & 0x04)) {
+	    !bprm->file->f_op->mmap) {
 		return -ENOEXEC;
 	}
 
@@ -411,16 +392,17 @@ static int verify_binary(struct elfhdr *ehp, struct linux_binprm *bprm)
 	 * XXX all registers as 64bits on cpu's capable of this at
 	 * XXX exception time plus frob the XTLB exception vector.
 	 */
-	if((ehp->e_flags & 0x20)) {
+	if((ehp->e_flags & EF_MIPS_ABI2))
 		return -ENOEXEC;
-	}
 
-	return 0; /* It's ok. */
+	return 0;
 }
 
-#define IRIX_INTERP_PREFIX "/usr/gnemul/irix"
-
-/* Look for an IRIX ELF interpreter. */
+/*
+ * This is where the detailed check is performed. Irix binaries
+ * use interpreters with 'libc.so' in the name, so this function
+ * can differentiate between Linux and Irix binaries.
+ */
 static inline int look_for_irix_interpreter(char **name,
 					    struct file **interpreter,
 					    struct elfhdr *interp_elf_ex,
@@ -440,12 +422,11 @@ static inline int look_for_irix_interpreter(char **name,
 		if (*name != NULL)
 			goto out;
 
-		*name = kmalloc((epp->p_filesz + strlen(IRIX_INTERP_PREFIX)),
-				GFP_KERNEL);
+		*name = kmalloc(epp->p_filesz + strlen(IRIX_EMUL), GFP_KERNEL);
 		if (!*name)
 			return -ENOMEM;
 
-		strcpy(*name, IRIX_INTERP_PREFIX);
+		strcpy(*name, IRIX_EMUL);
 		retval = kernel_read(bprm->file, epp->p_offset, (*name + 16),
 		                     epp->p_filesz);
 		if (retval < 0)
@@ -562,7 +543,7 @@ static inline int map_interpreter(struct elf_phdr *epp, struct elfhdr *ihp,
  * process and the system, here we map the page and fill the
  * structure
  */
-void irix_map_prda_page (void)
+static void irix_map_prda_page(void)
 {
 	unsigned long v;
 	struct prda *pp;
@@ -601,14 +582,33 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 
 	load_addr = 0;
 	has_interp = has_ephdr = 0;
-	elf_ihdr = elf_ephdr = 0;
+	elf_ihdr = elf_ephdr = NULL;
 	elf_ex = *((struct elfhdr *) bprm->buf);
 	retval = -ENOEXEC;
 
 	if (verify_binary(&elf_ex, bprm))
 		goto out;
 
-#ifdef DEBUG_ELF
+	/*
+	 * Telling -o32 static binaries from Linux and Irix apart from each
+	 * other is difficult. There are 2 differences to be noted for static
+	 * binaries from the 2 operating systems:
+	 *
+	 *    1) Irix binaries have their .text section before their .init
+	 *       section. Linux binaries are just the opposite.
+	 *
+	 *    2) Irix binaries usually have <= 12 sections and Linux
+	 *       binaries have > 20.
+	 *
+	 * We will use Method #2 since Method #1 would require us to read in
+	 * the section headers which is way too much overhead. This appears
+	 * to work for everything we have ran into so far. If anyone has a
+	 * better method to tell the binaries apart, I'm listening.
+	 */
+	if (elf_ex.e_shnum > 20)
+		goto out;
+
+#ifdef DEBUG
 	print_elfhdr(&elf_ex);
 #endif
 
@@ -623,11 +623,10 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	}
 
 	retval = kernel_read(bprm->file, elf_ex.e_phoff, (char *)elf_phdata, size);
-
 	if (retval < 0)
 		goto out_free_ph;
 
-#ifdef DEBUG_ELF
+#ifdef DEBUG
 	dump_phdrs(elf_phdata, elf_ex.e_phnum);
 #endif
 
@@ -644,9 +643,8 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 			break;
 		};
 	}
-#ifdef DEBUG_ELF
-	printk("\n");
-#endif
+
+	pr_debug("\n");
 
 	elf_bss = 0;
 	elf_brk = 0;
@@ -657,12 +655,19 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	end_code = 0;
 	end_data = 0;
 
-	retval = look_for_irix_interpreter(&elf_interpreter,
-	                                   &interpreter,
+	/*
+	 * If we get a return value, we change the value to be ENOEXEC
+	 * so that we can exit gracefully and the main binary format
+	 * search loop in 'fs/exec.c' will move onto the next handler
+	 * which should be the normal ELF binary handler.
+	 */
+	retval = look_for_irix_interpreter(&elf_interpreter, &interpreter,
 					   &interp_elf_ex, elf_phdata, bprm,
 					   elf_ex.e_phnum);
-	if (retval)
+	if (retval) {
+		retval = -ENOEXEC;
 		goto out_free_file;
+	}
 
 	if (elf_interpreter) {
 		retval = verify_irix_interpreter(&interp_elf_ex);
@@ -692,7 +697,6 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	/* Do this so that we can load the interpreter, if need be.  We will
 	 * change some of these later.
 	 */
-	set_mm_counter(current->mm, rss, 0);
 	setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT);
 	current->mm->start_stack = bprm->p;
 
@@ -746,18 +750,16 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	 * IRIX maps a page at 0x200000 which holds some system
 	 * information.  Programs depend on this.
 	 */
-	irix_map_prda_page ();
+	irix_map_prda_page();
 
 	padzero(elf_bss);
 
-#ifdef DEBUG_ELF
-	printk("(start_brk) %lx\n" , (long) current->mm->start_brk);
-	printk("(end_code) %lx\n" , (long) current->mm->end_code);
-	printk("(start_code) %lx\n" , (long) current->mm->start_code);
-	printk("(end_data) %lx\n" , (long) current->mm->end_data);
-	printk("(start_stack) %lx\n" , (long) current->mm->start_stack);
-	printk("(brk) %lx\n" , (long) current->mm->brk);
-#endif
+	pr_debug("(start_brk) %lx\n" , (long) current->mm->start_brk);
+	pr_debug("(end_code) %lx\n" , (long) current->mm->end_code);
+	pr_debug("(start_code) %lx\n" , (long) current->mm->start_code);
+	pr_debug("(end_data) %lx\n" , (long) current->mm->end_data);
+	pr_debug("(start_stack) %lx\n" , (long) current->mm->start_stack);
+	pr_debug("(brk) %lx\n" , (long) current->mm->brk);
 
 #if 0 /* XXX No fucking way dude... */
 	/* Why this, you ask???  Well SVr4 maps page 0 as read-only,
@@ -782,8 +784,7 @@ out_free_dentry:
 	allow_write_access(interpreter);
 	fput(interpreter);
 out_free_interp:
-	if (elf_interpreter)
-		kfree(elf_interpreter);
+	kfree(elf_interpreter);
 out_free_file:
 out_free_ph:
 	kfree (elf_phdata);
@@ -813,7 +814,7 @@ static int load_irix_library(struct file *file)
 
 	/* First of all, some simple consistency checks. */
 	if(elf_ex.e_type != ET_EXEC || elf_ex.e_phnum > 2 ||
-	   !irix_elf_check_arch(&elf_ex) || !file->f_op->mmap)
+	   !file->f_op->mmap)
 		return -ENOEXEC;
 
 	/* Now read in all of the header information. */
@@ -874,35 +875,36 @@ static int load_irix_library(struct file *file)
  * phdrs there are in the USER_PHDRP array.  We return the vaddr the
  * first phdr was successfully mapped to.
  */
-unsigned long irix_mapelf(int fd, struct elf_phdr *user_phdrp, int cnt)
+unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt)
 {
-	struct elf_phdr *hp;
+	unsigned long type, vaddr, filesz, offset, flags;
+	struct elf_phdr __user *hp;
 	struct file *filp;
 	int i, retval;
 
-#ifdef DEBUG_ELF
-	printk("irix_mapelf: fd[%d] user_phdrp[%p] cnt[%d]\n",
-	       fd, user_phdrp, cnt);
-#endif
+	pr_debug("irix_mapelf: fd[%d] user_phdrp[%p] cnt[%d]\n",
+	         fd, user_phdrp, cnt);
 
 	/* First get the verification out of the way. */
 	hp = user_phdrp;
 	if (!access_ok(VERIFY_READ, hp, (sizeof(struct elf_phdr) * cnt))) {
-#ifdef DEBUG_ELF
-		printk("irix_mapelf: access_ok fails!\n");
-#endif
+		pr_debug("irix_mapelf: bad pointer to ELF PHDR!\n");
+
 		return -EFAULT;
 	}
 
-#ifdef DEBUG_ELF
+#ifdef DEBUG
 	dump_phdrs(user_phdrp, cnt);
 #endif
 
-	for(i = 0; i < cnt; i++, hp++)
-		if(hp->p_type != PT_LOAD) {
+	for (i = 0; i < cnt; i++, hp++) {
+		if (__get_user(type, &hp->p_type))
+			return -EFAULT;
+		if (type != PT_LOAD) {
 			printk("irix_mapelf: One section is not PT_LOAD!\n");
 			return -ENOEXEC;
 		}
+	}
 
 	filp = fget(fd);
 	if (!filp)
@@ -917,29 +919,40 @@ unsigned long irix_mapelf(int fd, struct elf_phdr *user_phdrp, int cnt)
 	for(i = 0; i < cnt; i++, hp++) {
 		int prot;
 
-		prot  = (hp->p_flags & PF_R) ? PROT_READ : 0;
-		prot |= (hp->p_flags & PF_W) ? PROT_WRITE : 0;
-		prot |= (hp->p_flags & PF_X) ? PROT_EXEC : 0;
+		retval = __get_user(vaddr, &hp->p_vaddr);
+		retval |= __get_user(filesz, &hp->p_filesz);
+		retval |= __get_user(offset, &hp->p_offset);
+		retval |= __get_user(flags, &hp->p_flags);
+		if (retval)
+			return retval;
+
+		prot  = (flags & PF_R) ? PROT_READ : 0;
+		prot |= (flags & PF_W) ? PROT_WRITE : 0;
+		prot |= (flags & PF_X) ? PROT_EXEC : 0;
+
 		down_write(&current->mm->mmap_sem);
-		retval = do_mmap(filp, (hp->p_vaddr & 0xfffff000),
-				 (hp->p_filesz + (hp->p_vaddr & 0xfff)),
+		retval = do_mmap(filp, (vaddr & 0xfffff000),
+				 (filesz + (vaddr & 0xfff)),
 				 prot, (MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE),
-				 (hp->p_offset & 0xfffff000));
+				 (offset & 0xfffff000));
 		up_write(&current->mm->mmap_sem);
 
-		if(retval != (hp->p_vaddr & 0xfffff000)) {
+		if (retval != (vaddr & 0xfffff000)) {
 			printk("irix_mapelf: do_mmap fails with %d!\n", retval);
 			fput(filp);
 			return retval;
 		}
 	}
 
-#ifdef DEBUG_ELF
-	printk("irix_mapelf: Success, returning %08lx\n",
-		(unsigned long) user_phdrp->p_vaddr);
-#endif
+	pr_debug("irix_mapelf: Success, returning %08lx\n",
+		 (unsigned long) user_phdrp->p_vaddr);
+
 	fput(filp);
-	return user_phdrp->p_vaddr;
+
+	if (__get_user(vaddr, &user_phdrp->p_vaddr))
+		return -EFAULT;
+
+	return vaddr;
 }
 
 /*
@@ -952,9 +965,9 @@ unsigned long irix_mapelf(int fd, struct elf_phdr *user_phdrp, int cnt)
 /* These are the only things you should do on a core-file: use only these
  * functions to write out all the necessary info.
  */
-static int dump_write(struct file *file, const void *addr, int nr)
+static int dump_write(struct file *file, const void __user *addr, int nr)
 {
-	return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
+	return file->f_op->write(file, (const char __user *) addr, nr, &file->f_pos) == nr;
 }
 
 static int dump_seek(struct file *file, off_t off)
@@ -1064,8 +1077,8 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file)
 	struct elfhdr elf;
 	off_t offset = 0, dataoff;
 	int limit = current->signal->rlim[RLIMIT_CORE].rlim_cur;
-	int numnote = 4;
-	struct memelfnote notes[4];
+	int numnote = 3;
+	struct memelfnote notes[3];
 	struct elf_prstatus prstatus;	/* NT_PRSTATUS */
 	elf_fpregset_t fpu;		/* NT_PRFPREG */
 	struct elf_prpsinfo psinfo;	/* NT_PRPSINFO */
@@ -1073,7 +1086,7 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file)
 	/* Count what's needed to dump, up to the limit of coredump size. */
 	segs = 0;
 	size = 0;
-	for(vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) {
+	for (vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) {
 		if (maydump(vma))
 		{
 			int sz = vma->vm_end-vma->vm_start;
@@ -1187,9 +1200,9 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file)
 
 		len = current->mm->arg_end - current->mm->arg_start;
 		len = len >= ELF_PRARGSZ ? ELF_PRARGSZ : len;
-		copy_from_user(&psinfo.pr_psargs,
-			       (const char *)current->mm->arg_start, len);
-		for(i = 0; i < len; i++)
+		(void *) copy_from_user(&psinfo.pr_psargs,
+			       (const char __user *)current->mm->arg_start, len);
+		for (i = 0; i < len; i++)
 			if (psinfo.pr_psargs[i] == 0)
 				psinfo.pr_psargs[i] = ' ';
 		psinfo.pr_psargs[len] = 0;
@@ -1198,20 +1211,15 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file)
 	}
 	strlcpy(psinfo.pr_fname, current->comm, sizeof(psinfo.pr_fname));
 
-	notes[2].name = "CORE";
-	notes[2].type = NT_TASKSTRUCT;
-	notes[2].datasz = sizeof(*current);
-	notes[2].data = current;
-
 	/* Try to dump the FPU. */
 	prstatus.pr_fpvalid = dump_fpu (regs, &fpu);
 	if (!prstatus.pr_fpvalid) {
 		numnote--;
 	} else {
-		notes[3].name = "CORE";
-		notes[3].type = NT_PRFPREG;
-		notes[3].datasz = sizeof(fpu);
-		notes[3].data = &fpu;
+		notes[2].name = "CORE";
+		notes[2].type = NT_PRFPREG;
+		notes[2].datasz = sizeof(fpu);
+		notes[2].data = &fpu;
 	}
 
 	/* Write notes phdr entry. */
@@ -1256,8 +1264,10 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file)
 		phdr.p_memsz = sz;
 		offset += phdr.p_filesz;
 		phdr.p_flags = vma->vm_flags & VM_READ ? PF_R : 0;
-		if (vma->vm_flags & VM_WRITE) phdr.p_flags |= PF_W;
-		if (vma->vm_flags & VM_EXEC) phdr.p_flags |= PF_X;
+		if (vma->vm_flags & VM_WRITE)
+			phdr.p_flags |= PF_W;
+		if (vma->vm_flags & VM_EXEC)
+			phdr.p_flags |= PF_X;
 		phdr.p_align = PAGE_SIZE;
 
 		DUMP_WRITE(&phdr, sizeof(phdr));
@@ -1283,7 +1293,7 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file)
 #ifdef DEBUG
 		printk("elf_core_dump: writing %08lx %lx\n", addr, len);
 #endif
-		DUMP_WRITE((void *)addr, len);
+		DUMP_WRITE((void __user *)addr, len);
 	}
 
 	if ((off_t) file->f_pos != offset) {
@@ -1299,7 +1309,7 @@ end_coredump:
 
 static int __init init_irix_binfmt(void)
 {
-	int init_inventory(void);
+	extern int init_inventory(void);
 	extern asmlinkage unsigned long sys_call_table;
 	extern asmlinkage unsigned long sys_call_table_irix5;
 
@@ -1318,7 +1328,9 @@ static int __init init_irix_binfmt(void)
 
 static void __exit exit_irix_binfmt(void)
 {
-	/* Remove the IRIX ELF loaders. */
+	/*
+	 * Remove the Irix ELF loader.
+	 */
 	unregister_binfmt(&irix_format);
 }
 
diff --git a/arch/mips/kernel/irixinv.c b/arch/mips/kernel/irixinv.c
index 60aa98cd1791..de8584f62311 100644
--- a/arch/mips/kernel/irixinv.c
+++ b/arch/mips/kernel/irixinv.c
@@ -30,10 +30,10 @@ void add_to_inventory (int class, int type, int controller, int unit, int state)
 	inventory_items++;
 }
 
-int dump_inventory_to_user (void *userbuf, int size)
+int dump_inventory_to_user (void __user *userbuf, int size)
 {
 	inventory_t *inv  = &inventory [0];
-	inventory_t *user = userbuf;
+	inventory_t __user *user = userbuf;
 	int v;
 
 	if (!access_ok(VERIFY_WRITE, userbuf, size))
@@ -41,7 +41,8 @@ int dump_inventory_to_user (void *userbuf, int size)
 
 	for (v = 0; v < inventory_items; v++){
 		inv = &inventory [v];
-		copy_to_user (user, inv, sizeof (inventory_t));
+		if (copy_to_user (user, inv, sizeof (inventory_t)))
+			return -EFAULT;
 		user++;
 	}
 	return inventory_items * sizeof (inventory_t);
diff --git a/arch/mips/kernel/irixioctl.c b/arch/mips/kernel/irixioctl.c
index 3cdc22346f4c..e2863821a3dd 100644
--- a/arch/mips/kernel/irixioctl.c
+++ b/arch/mips/kernel/irixioctl.c
@@ -59,7 +59,7 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg)
 {
 	struct tty_struct *tp, *rtp;
 	mm_segment_t old_fs;
-	int error = 0;
+	int i, error = 0;
 
 #ifdef DEBUG_IOCTLS
 	printk("[%s:%d] irix_ioctl(%d, ", current->comm, current->pid, fd);
@@ -74,12 +74,13 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg)
 
 	case 0x0000540d: {
 		struct termios kt;
-		struct irix_termios *it = (struct irix_termios *) arg;
+		struct irix_termios __user *it =
+			(struct irix_termios __user *) arg;
 
 #ifdef DEBUG_IOCTLS
 		printk("TCGETS, %08lx) ", arg);
 #endif
-		if(!access_ok(VERIFY_WRITE, it, sizeof(*it))) {
+		if (!access_ok(VERIFY_WRITE, it, sizeof(*it))) {
 			error = -EFAULT;
 			break;
 		}
@@ -88,13 +89,14 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg)
 		set_fs(old_fs);
 		if (error)
 			break;
-		__put_user(kt.c_iflag, &it->c_iflag);
-		__put_user(kt.c_oflag, &it->c_oflag);
-		__put_user(kt.c_cflag, &it->c_cflag);
-		__put_user(kt.c_lflag, &it->c_lflag);
-		for(error = 0; error < NCCS; error++)
-			__put_user(kt.c_cc[error], &it->c_cc[error]);
-		error = 0;
+
+		error = __put_user(kt.c_iflag, &it->c_iflag);
+		error |= __put_user(kt.c_oflag, &it->c_oflag);
+		error |= __put_user(kt.c_cflag, &it->c_cflag);
+		error |= __put_user(kt.c_lflag, &it->c_lflag);
+
+		for (i = 0; i < NCCS; i++)
+			error |= __put_user(kt.c_cc[i], &it->c_cc[i]);
 		break;
 	}
 
@@ -112,14 +114,19 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg)
 		old_fs = get_fs(); set_fs(get_ds());
 		error = sys_ioctl(fd, TCGETS, (unsigned long) &kt);
 		set_fs(old_fs);
-		if(error)
+		if (error)
+			break;
+
+		error = __get_user(kt.c_iflag, &it->c_iflag);
+		error |= __get_user(kt.c_oflag, &it->c_oflag);
+		error |= __get_user(kt.c_cflag, &it->c_cflag);
+		error |= __get_user(kt.c_lflag, &it->c_lflag);
+
+		for (i = 0; i < NCCS; i++)
+			error |= __get_user(kt.c_cc[i], &it->c_cc[i]);
+
+		if (error)
 			break;
-		__get_user(kt.c_iflag, &it->c_iflag);
-		__get_user(kt.c_oflag, &it->c_oflag);
-		__get_user(kt.c_cflag, &it->c_cflag);
-		__get_user(kt.c_lflag, &it->c_lflag);
-		for(error = 0; error < NCCS; error++)
-			__get_user(kt.c_cc[error], &it->c_cc[error]);
 		old_fs = get_fs(); set_fs(get_ds());
 		error = sys_ioctl(fd, TCSETS, (unsigned long) &kt);
 		set_fs(old_fs);
@@ -153,7 +160,7 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg)
 #ifdef DEBUG_IOCTLS
 		printk("rtp->session=%d ", rtp->session);
 #endif
-		error = put_user(rtp->session, (unsigned long *) arg);
+		error = put_user(rtp->session, (unsigned long __user *) arg);
 		break;
 
 	case 0x746e:
@@ -195,50 +202,32 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg)
 		break;
 
 	case 0x8004667e:
-#ifdef DEBUG_IOCTLS
-		printk("FIONBIO, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
 		error = sys_ioctl(fd, FIONBIO, arg);
 		break;
 
 	case 0x80047476:
-#ifdef DEBUG_IOCTLS
-		printk("TIOCSPGRP, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
 		error = sys_ioctl(fd, TIOCSPGRP, arg);
 		break;
 
 	case 0x8020690c:
-#ifdef DEBUG_IOCTLS
-		printk("SIOCSIFADDR, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
 		error = sys_ioctl(fd, SIOCSIFADDR, arg);
 		break;
 
 	case 0x80206910:
-#ifdef DEBUG_IOCTLS
-		printk("SIOCSIFFLAGS, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
 		error = sys_ioctl(fd, SIOCSIFFLAGS, arg);
 		break;
 
 	case 0xc0206911:
-#ifdef DEBUG_IOCTLS
-		printk("SIOCGIFFLAGS, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
 		error = sys_ioctl(fd, SIOCGIFFLAGS, arg);
 		break;
 
 	case 0xc020691b:
-#ifdef DEBUG_IOCTLS
-		printk("SIOCGIFMETRIC, %08lx) arg=%d ", arg, *(int *)arg);
-#endif
 		error = sys_ioctl(fd, SIOCGIFMETRIC, arg);
 		break;
 
 	default: {
 #ifdef DEBUG_MISSING_IOCTL
-		char *msg = "Unimplemented IOCTL cmd tell linux@engr.sgi.com\n";
+		char *msg = "Unimplemented IOCTL cmd tell linux-mips@linux-mips.org\n";
 
 #ifdef DEBUG_IOCTLS
 		printk("UNIMP_IOCTL, %08lx)\n", arg);
diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c
index eff89322ba50..908e63684208 100644
--- a/arch/mips/kernel/irixsig.c
+++ b/arch/mips/kernel/irixsig.c
@@ -76,36 +76,39 @@ static inline void dump_irix5_sigctx(struct sigctx_irix5 *c)
 }
 #endif
 
-static void setup_irix_frame(struct k_sigaction *ka, struct pt_regs *regs,
-			     int signr, sigset_t *oldmask)
+static int setup_irix_frame(struct k_sigaction *ka, struct pt_regs *regs,
+			    int signr, sigset_t *oldmask)
 {
+	struct sigctx_irix5 __user *ctx;
 	unsigned long sp;
-	struct sigctx_irix5 *ctx;
-	int i;
+	int error, i;
 
 	sp = regs->regs[29];
 	sp -= sizeof(struct sigctx_irix5);
 	sp &= ~(0xf);
-	ctx = (struct sigctx_irix5 *) sp;
+	ctx = (struct sigctx_irix5 __user *) sp;
 	if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)))
 		goto segv_and_exit;
 
-	__put_user(0, &ctx->weird_fpu_thing);
-	__put_user(~(0x00000001), &ctx->rmask);
-	__put_user(0, &ctx->regs[0]);
+	error = __put_user(0, &ctx->weird_fpu_thing);
+	error |= __put_user(~(0x00000001), &ctx->rmask);
+	error |= __put_user(0, &ctx->regs[0]);
 	for(i = 1; i < 32; i++)
-		__put_user((u64) regs->regs[i], &ctx->regs[i]);
+		error |= __put_user((u64) regs->regs[i], &ctx->regs[i]);
+
+	error |= __put_user((u64) regs->hi, &ctx->hi);
+	error |= __put_user((u64) regs->lo, &ctx->lo);
+	error |= __put_user((u64) regs->cp0_epc, &ctx->pc);
+	error |= __put_user(!!used_math(), &ctx->usedfp);
+	error |= __put_user((u64) regs->cp0_cause, &ctx->cp0_cause);
+	error |= __put_user((u64) regs->cp0_badvaddr, &ctx->cp0_badvaddr);
 
-	__put_user((u64) regs->hi, &ctx->hi);
-	__put_user((u64) regs->lo, &ctx->lo);
-	__put_user((u64) regs->cp0_epc, &ctx->pc);
-	__put_user(!!used_math(), &ctx->usedfp);
-	__put_user((u64) regs->cp0_cause, &ctx->cp0_cause);
-	__put_user((u64) regs->cp0_badvaddr, &ctx->cp0_badvaddr);
+	error |= __put_user(0, &ctx->sstk_flags); /* XXX sigstack unimp... todo... */
 
-	__put_user(0, &ctx->sstk_flags); /* XXX sigstack unimp... todo... */
+	error |= __copy_to_user(&ctx->sigset, oldmask, sizeof(irix_sigset_t)) ? -EFAULT : 0;
 
-	__copy_to_user(&ctx->sigset, oldmask, sizeof(irix_sigset_t));
+	if (error)
+		goto segv_and_exit;
 
 #ifdef DEBUG_SIG
 	dump_irix5_sigctx(ctx);
@@ -117,13 +120,14 @@ static void setup_irix_frame(struct k_sigaction *ka, struct pt_regs *regs,
 	regs->regs[7] = (unsigned long) ka->sa.sa_handler;
 	regs->regs[25] = regs->cp0_epc = (unsigned long) ka->sa_restorer;
 
-	return;
+	return 1;
 
 segv_and_exit:
 	force_sigsegv(signr, current);
+	return 0;
 }
 
-static void inline
+static int inline
 setup_irix_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
                int signr, sigset_t *oldmask, siginfo_t *info)
 {
@@ -131,9 +135,11 @@ setup_irix_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	do_exit(SIGSEGV);
 }
 
-static inline void handle_signal(unsigned long sig, siginfo_t *info,
+static inline int handle_signal(unsigned long sig, siginfo_t *info,
 	struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs)
 {
+	int ret;
+
 	switch(regs->regs[0]) {
 	case ERESTARTNOHAND:
 		regs->regs[2] = EINTR;
@@ -151,9 +157,9 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info,
 	regs->regs[0] = 0;		/* Don't deal with this again.  */
 
 	if (ka->sa.sa_flags & SA_SIGINFO)
-		setup_irix_rt_frame(ka, regs, sig, oldset, info);
+		ret = setup_irix_rt_frame(ka, regs, sig, oldset, info);
 	else
-		setup_irix_frame(ka, regs, sig, oldset);
+		ret = setup_irix_frame(ka, regs, sig, oldset);
 
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
@@ -161,6 +167,8 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info,
 		sigaddset(&current->blocked,sig);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
+
+	return ret;
 }
 
 asmlinkage int do_irix_signal(sigset_t *oldset, struct pt_regs *regs)
@@ -184,10 +192,8 @@ asmlinkage int do_irix_signal(sigset_t *oldset, struct pt_regs *regs)
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		handle_signal(signr, &info, &ka, oldset, regs);
-		return 1;
-	}
+	if (signr > 0)
+		return handle_signal(signr, &info, &ka, oldset, regs);
 
 no_signal:
 	/*
@@ -208,10 +214,11 @@ no_signal:
 asmlinkage void
 irix_sigreturn(struct pt_regs *regs)
 {
-	struct sigctx_irix5 *context, *magic;
+	struct sigctx_irix5 __user *context, *magic;
 	unsigned long umask, mask;
 	u64 *fregs;
-	int sig, i, base = 0;
+	u32 usedfp;
+	int error, sig, i, base = 0;
 	sigset_t blocked;
 
 	/* Always make any pending restarted system calls return -EINTR */
@@ -220,8 +227,8 @@ irix_sigreturn(struct pt_regs *regs)
 	if (regs->regs[2] == 1000)
 		base = 1;
 
-	context = (struct sigctx_irix5 *) regs->regs[base + 4];
-	magic = (struct sigctx_irix5 *) regs->regs[base + 5];
+	context = (struct sigctx_irix5 __user *) regs->regs[base + 4];
+	magic = (struct sigctx_irix5 __user *) regs->regs[base + 5];
 	sig = (int) regs->regs[base + 6];
 #ifdef DEBUG_SIG
 	printk("[%s:%d] IRIX sigreturn(scp[%p],ucp[%p],sig[%d])\n",
@@ -236,25 +243,31 @@ irix_sigreturn(struct pt_regs *regs)
 	dump_irix5_sigctx(context);
 #endif
 
-	__get_user(regs->cp0_epc, &context->pc);
-	umask = context->rmask; mask = 2;
+	error = __get_user(regs->cp0_epc, &context->pc);
+	error |= __get_user(umask, &context->rmask);
+
+	mask = 2;
 	for (i = 1; i < 32; i++, mask <<= 1) {
-		if(umask & mask)
-			__get_user(regs->regs[i], &context->regs[i]);
+		if (umask & mask)
+			error |= __get_user(regs->regs[i], &context->regs[i]);
 	}
-	__get_user(regs->hi, &context->hi);
-	__get_user(regs->lo, &context->lo);
+	error |= __get_user(regs->hi, &context->hi);
+	error |= __get_user(regs->lo, &context->lo);
 
-	if ((umask & 1) && context->usedfp) {
+	error |= __get_user(usedfp, &context->usedfp);
+	if ((umask & 1) && usedfp) {
 		fregs = (u64 *) &current->thread.fpu;
+
 		for(i = 0; i < 32; i++)
-			fregs[i] = (u64) context->fpregs[i];
-		__get_user(current->thread.fpu.hard.fcr31, &context->fpcsr);
+			error |= __get_user(fregs[i], &context->fpregs[i]);
+		error |= __get_user(current->thread.fpu.hard.fcr31, &context->fpcsr);
 	}
 
 	/* XXX do sigstack crapola here... XXX */
 
-	if (__copy_from_user(&blocked, &context->sigset, sizeof(blocked)))
+	error |= __copy_from_user(&blocked, &context->sigset, sizeof(blocked)) ? -EFAULT : 0;
+
+	if (error)
 		goto badframe;
 
 	sigdelsetmask(&blocked, ~_BLOCKABLE);
@@ -296,8 +309,8 @@ static inline void dump_sigact_irix5(struct sigact_irix5 *p)
 #endif
 
 asmlinkage int
-irix_sigaction(int sig, const struct sigaction *act,
-	      struct sigaction *oact, void *trampoline)
+irix_sigaction(int sig, const struct sigaction __user *act,
+	      struct sigaction __user *oact, void __user *trampoline)
 {
 	struct k_sigaction new_ka, old_ka;
 	int ret;
@@ -311,12 +324,16 @@ irix_sigaction(int sig, const struct sigaction *act,
 #endif
 	if (act) {
 		sigset_t mask;
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_flags, &act->sa_flags))
+		int err;
+
+		if (!access_ok(VERIFY_READ, act, sizeof(*act)))
 			return -EFAULT;
+		err = __get_user(new_ka.sa.sa_handler, &act->sa_handler);
+		err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
 
-		__copy_from_user(&mask, &act->sa_mask, sizeof(sigset_t));
+		err |= __copy_from_user(&mask, &act->sa_mask, sizeof(sigset_t)) ? -EFAULT : 0;
+		if (err)
+			return err;
 
 		/*
 		 * Hmmm... methinks IRIX libc always passes a valid trampoline
@@ -330,30 +347,37 @@ irix_sigaction(int sig, const struct sigaction *act,
 	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
 
 	if (!ret && oact) {
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags))
+		int err;
+
+		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)))
+			return -EFAULT;
+
+		err = __put_user(old_ka.sa.sa_handler, &oact->sa_handler);
+		err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+		err |= __copy_to_user(&oact->sa_mask, &old_ka.sa.sa_mask,
+		               sizeof(sigset_t)) ? -EFAULT : 0;
+		if (err)
 			return -EFAULT;
-		__copy_to_user(&old_ka.sa.sa_mask, &oact->sa_mask,
-		               sizeof(sigset_t));
 	}
 
 	return ret;
 }
 
-asmlinkage int irix_sigpending(irix_sigset_t *set)
+asmlinkage int irix_sigpending(irix_sigset_t __user *set)
 {
 	return do_sigpending(set, sizeof(*set));
 }
 
-asmlinkage int irix_sigprocmask(int how, irix_sigset_t *new, irix_sigset_t *old)
+asmlinkage int irix_sigprocmask(int how, irix_sigset_t __user *new,
+	irix_sigset_t __user *old)
 {
 	sigset_t oldbits, newbits;
 
 	if (new) {
 		if (!access_ok(VERIFY_READ, new, sizeof(*new)))
 			return -EFAULT;
-		__copy_from_user(&newbits, new, sizeof(unsigned long)*4);
+		if (__copy_from_user(&newbits, new, sizeof(unsigned long)*4))
+			return -EFAULT;
 		sigdelsetmask(&newbits, ~_BLOCKABLE);
 
 		spin_lock_irq(&current->sighand->siglock);
@@ -381,20 +405,19 @@ asmlinkage int irix_sigprocmask(int how, irix_sigset_t *new, irix_sigset_t *old)
 		recalc_sigpending();
 		spin_unlock_irq(&current->sighand->siglock);
 	}
-	if(old) {
-		if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
-			return -EFAULT;
-		__copy_to_user(old, &current->blocked, sizeof(unsigned long)*4);
-	}
+	if (old)
+		return copy_to_user(old, &current->blocked,
+		                  sizeof(unsigned long)*4) ? -EFAULT : 0;
 
 	return 0;
 }
 
 asmlinkage int irix_sigsuspend(struct pt_regs *regs)
 {
-	sigset_t *uset, saveset, newset;
+	sigset_t saveset, newset;
+	sigset_t __user *uset;
 
-	uset = (sigset_t *) regs->regs[4];
+	uset = (sigset_t __user *) regs->regs[4];
 	if (copy_from_user(&newset, uset, sizeof(sigset_t)))
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
@@ -440,12 +463,13 @@ struct irix5_siginfo {
 	} stuff;
 };
 
-asmlinkage int irix_sigpoll_sys(unsigned long *set, struct irix5_siginfo *info,
-				struct timespec *tp)
+asmlinkage int irix_sigpoll_sys(unsigned long __user *set,
+	struct irix5_siginfo __user *info, struct timespec __user *tp)
 {
 	long expire = MAX_SCHEDULE_TIMEOUT;
 	sigset_t kset;
 	int i, sig, error, timeo = 0;
+	struct timespec ktp;
 
 #ifdef DEBUG_SIG
 	printk("[%s:%d] irix_sigpoll_sys(%p,%p,%p)\n",
@@ -456,14 +480,8 @@ asmlinkage int irix_sigpoll_sys(unsigned long *set, struct irix5_siginfo *info,
 	if (!set)
 		return -EINVAL;
 
-	if (!access_ok(VERIFY_READ, set, sizeof(kset))) {
-		error = -EFAULT;
-		goto out;
-	}
-
-	__copy_from_user(&kset, set, sizeof(set));
-	if (error)
-		goto out;
+	if (copy_from_user(&kset, set, sizeof(set)))
+		return -EFAULT;
 
 	if (info && clear_user(info, sizeof(*info))) {
 		error = -EFAULT;
@@ -471,19 +489,21 @@ asmlinkage int irix_sigpoll_sys(unsigned long *set, struct irix5_siginfo *info,
 	}
 
 	if (tp) {
-		if (!access_ok(VERIFY_READ, tp, sizeof(*tp)))
+		if (copy_from_user(&ktp, tp, sizeof(*tp)))
 			return -EFAULT;
-		if (!tp->tv_sec && !tp->tv_nsec) {
-			error = -EINVAL;
-			goto out;
-		}
-		expire = timespec_to_jiffies(tp) + (tp->tv_sec||tp->tv_nsec);
+
+		if (!ktp.tv_sec && !ktp.tv_nsec)
+			return -EINVAL;
+
+		expire = timespec_to_jiffies(&ktp) +
+		         (ktp.tv_sec || ktp.tv_nsec);
 	}
 
 	while(1) {
 		long tmp = 0;
 
-		expire = schedule_timeout_interruptible(expire);
+		current->state = TASK_INTERRUPTIBLE;
+		expire = schedule_timeout(expire);
 
 		for (i=0; i<=4; i++)
 			tmp |= (current->pending.signal.sig[i] & kset.sig[i]);
@@ -500,15 +520,14 @@ asmlinkage int irix_sigpoll_sys(unsigned long *set, struct irix5_siginfo *info,
 	if (timeo)
 		return -EAGAIN;
 
-	for(sig = 1; i <= 65 /* IRIX_NSIG */; sig++) {
+	for (sig = 1; i <= 65 /* IRIX_NSIG */; sig++) {
 		if (sigismember (&kset, sig))
 			continue;
 		if (sigismember (&current->pending.signal, sig)) {
 			/* XXX need more than this... */
 			if (info)
-				info->sig = sig;
-			error = 0;
-			goto out;
+				return copy_to_user(&info->sig, &sig, sizeof(sig));
+			return 0;
 		}
 	}
 
@@ -534,8 +553,9 @@ extern int getrusage(struct task_struct *, int, struct rusage __user *);
 
 #define W_MASK      (W_EXITED | W_TRAPPED | W_STOPPED | W_CONT | W_NOHANG)
 
-asmlinkage int irix_waitsys(int type, int pid, struct irix5_siginfo *info,
-			    int options, struct rusage *ru)
+asmlinkage int irix_waitsys(int type, int pid,
+	struct irix5_siginfo __user *info, int options,
+	struct rusage __user *ru)
 {
 	int flag, retval;
 	DECLARE_WAITQUEUE(wait, current);
@@ -543,28 +563,22 @@ asmlinkage int irix_waitsys(int type, int pid, struct irix5_siginfo *info,
 	struct task_struct *p;
 	struct list_head *_p;
 
-	if (!info) {
-		retval = -EINVAL;
-		goto out;
-	}
-	if (!access_ok(VERIFY_WRITE, info, sizeof(*info))) {
-		retval = -EFAULT;
-		goto out;
-	}
-	if (ru) {
-		if (!access_ok(VERIFY_WRITE, ru, sizeof(*ru))) {
-			retval = -EFAULT;
-			goto out;
-		}
-	}
-	if (options & ~(W_MASK)) {
-		retval = -EINVAL;
-		goto out;
-	}
-	if (type != IRIX_P_PID && type != IRIX_P_PGID && type != IRIX_P_ALL) {
-		retval = -EINVAL;
-		goto out;
-	}
+	if (!info)
+		return -EINVAL;
+
+	if (!access_ok(VERIFY_WRITE, info, sizeof(*info)))
+		return -EFAULT;
+
+	if (ru)
+		if (!access_ok(VERIFY_WRITE, ru, sizeof(*ru)))
+			return -EFAULT;
+
+	if (options & ~W_MASK)
+		return -EINVAL;
+
+	if (type != IRIX_P_PID && type != IRIX_P_PGID && type != IRIX_P_ALL)
+		return -EINVAL;
+
 	add_wait_queue(&current->signal->wait_chldexit, &wait);
 repeat:
 	flag = 0;
@@ -595,18 +609,20 @@ repeat:
 			add_parent(p, p->parent);
 			write_unlock_irq(&tasklist_lock);
 			retval = ru ? getrusage(p, RUSAGE_BOTH, ru) : 0;
-			if (!retval && ru) {
-				retval |= __put_user(SIGCHLD, &info->sig);
-				retval |= __put_user(0, &info->code);
-				retval |= __put_user(p->pid, &info->stuff.procinfo.pid);
-				retval |= __put_user((p->exit_code >> 8) & 0xff,
-				           &info->stuff.procinfo.procdata.child.status);
-				retval |= __put_user(p->utime, &info->stuff.procinfo.procdata.child.utime);
-				retval |= __put_user(p->stime, &info->stuff.procinfo.procdata.child.stime);
-			}
-			if (!retval) {
-				p->exit_code = 0;
-			}
+			if (retval)
+				goto end_waitsys;
+
+			retval = __put_user(SIGCHLD, &info->sig);
+			retval |= __put_user(0, &info->code);
+			retval |= __put_user(p->pid, &info->stuff.procinfo.pid);
+			retval |= __put_user((p->exit_code >> 8) & 0xff,
+			           &info->stuff.procinfo.procdata.child.status);
+			retval |= __put_user(p->utime, &info->stuff.procinfo.procdata.child.utime);
+			retval |= __put_user(p->stime, &info->stuff.procinfo.procdata.child.stime);
+			if (retval)
+				goto end_waitsys;
+
+			p->exit_code = 0;
 			goto end_waitsys;
 
 		case EXIT_ZOMBIE:
@@ -614,16 +630,18 @@ repeat:
 			current->signal->cstime += p->stime + p->signal->cstime;
 			if (ru != NULL)
 				getrusage(p, RUSAGE_BOTH, ru);
-			__put_user(SIGCHLD, &info->sig);
-			__put_user(1, &info->code);      /* CLD_EXITED */
-			__put_user(p->pid, &info->stuff.procinfo.pid);
-			__put_user((p->exit_code >> 8) & 0xff,
+			retval = __put_user(SIGCHLD, &info->sig);
+			retval |= __put_user(1, &info->code);      /* CLD_EXITED */
+			retval |= __put_user(p->pid, &info->stuff.procinfo.pid);
+			retval |= __put_user((p->exit_code >> 8) & 0xff,
 			           &info->stuff.procinfo.procdata.child.status);
-			__put_user(p->utime,
+			retval |= __put_user(p->utime,
 			           &info->stuff.procinfo.procdata.child.utime);
-			__put_user(p->stime,
+			retval |= __put_user(p->stime,
 			           &info->stuff.procinfo.procdata.child.stime);
-			retval = 0;
+			if (retval)
+				return retval;
+
 			if (p->real_parent != p->parent) {
 				write_lock_irq(&tasklist_lock);
 				remove_parent(p);
@@ -656,7 +674,6 @@ end_waitsys:
 	current->state = TASK_RUNNING;
 	remove_wait_queue(&current->signal->wait_chldexit, &wait);
 
-out:
 	return retval;
 }
 
@@ -675,39 +692,39 @@ struct irix5_context {
 
 asmlinkage int irix_getcontext(struct pt_regs *regs)
 {
-	int i, base = 0;
-	struct irix5_context *ctx;
+	int error, i, base = 0;
+	struct irix5_context __user *ctx;
 	unsigned long flags;
 
 	if (regs->regs[2] == 1000)
 		base = 1;
-	ctx = (struct irix5_context *) regs->regs[base + 4];
+	ctx = (struct irix5_context __user *) regs->regs[base + 4];
 
 #ifdef DEBUG_SIG
 	printk("[%s:%d] irix_getcontext(%p)\n",
 	       current->comm, current->pid, ctx);
 #endif
 
-	if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)))
+	if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)));
 		return -EFAULT;
 
-	__put_user(current->thread.irix_oldctx, &ctx->link);
+	error = __put_user(current->thread.irix_oldctx, &ctx->link);
 
-	__copy_to_user(&ctx->sigmask, &current->blocked, sizeof(irix_sigset_t));
+	error |= __copy_to_user(&ctx->sigmask, &current->blocked, sizeof(irix_sigset_t)) ? -EFAULT : 0;
 
 	/* XXX Do sigstack stuff someday... */
-	__put_user(0, &ctx->stack.sp);
-	__put_user(0, &ctx->stack.size);
-	__put_user(0, &ctx->stack.flags);
+	error |= __put_user(0, &ctx->stack.sp);
+	error |= __put_user(0, &ctx->stack.size);
+	error |= __put_user(0, &ctx->stack.flags);
 
-	__put_user(0, &ctx->weird_graphics_thing);
-	__put_user(0, &ctx->regs[0]);
+	error |= __put_user(0, &ctx->weird_graphics_thing);
+	error |= __put_user(0, &ctx->regs[0]);
 	for (i = 1; i < 32; i++)
-		__put_user(regs->regs[i], &ctx->regs[i]);
-	__put_user(regs->lo, &ctx->regs[32]);
-	__put_user(regs->hi, &ctx->regs[33]);
-	__put_user(regs->cp0_cause, &ctx->regs[34]);
-	__put_user(regs->cp0_epc, &ctx->regs[35]);
+		error |= __put_user(regs->regs[i], &ctx->regs[i]);
+	error |= __put_user(regs->lo, &ctx->regs[32]);
+	error |= __put_user(regs->hi, &ctx->regs[33]);
+	error |= __put_user(regs->cp0_cause, &ctx->regs[34]);
+	error |= __put_user(regs->cp0_epc, &ctx->regs[35]);
 
 	flags = 0x0f;
 	if (!used_math()) {
@@ -716,119 +733,124 @@ asmlinkage int irix_getcontext(struct pt_regs *regs)
 		/* XXX wheee... */
 		printk("Wheee, no code for saving IRIX FPU context yet.\n");
 	}
-	__put_user(flags, &ctx->flags);
+	error |= __put_user(flags, &ctx->flags);
 
-	return 0;
+	return error;
 }
 
-asmlinkage unsigned long irix_setcontext(struct pt_regs *regs)
+asmlinkage void irix_setcontext(struct pt_regs *regs)
 {
-	int error, base = 0;
-	struct irix5_context *ctx;
+	struct irix5_context __user *ctx;
+	int err, base = 0;
+	u32 flags;
 
-	if(regs->regs[2] == 1000)
+	if (regs->regs[2] == 1000)
 		base = 1;
-	ctx = (struct irix5_context *) regs->regs[base + 4];
+	ctx = (struct irix5_context __user *) regs->regs[base + 4];
 
 #ifdef DEBUG_SIG
 	printk("[%s:%d] irix_setcontext(%p)\n",
 	       current->comm, current->pid, ctx);
 #endif
 
-	if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx))) {
-		error = -EFAULT;
-		goto out;
-	}
+	if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx)))
+		goto segv_and_exit;
 
-	if (ctx->flags & 0x02) {
+	err = __get_user(flags, &ctx->flags);
+	if (flags & 0x02) {
 		/* XXX sigstack garbage, todo... */
 		printk("Wheee, cannot do sigstack stuff in setcontext\n");
 	}
 
-	if (ctx->flags & 0x04) {
+	if (flags & 0x04) {
 		int i;
 
 		/* XXX extra control block stuff... todo... */
-		for(i = 1; i < 32; i++)
-			regs->regs[i] = ctx->regs[i];
-		regs->lo = ctx->regs[32];
-		regs->hi = ctx->regs[33];
-		regs->cp0_epc = ctx->regs[35];
+		for (i = 1; i < 32; i++)
+			err |= __get_user(regs->regs[i], &ctx->regs[i]);
+		err |= __get_user(regs->lo, &ctx->regs[32]);
+		err |= __get_user(regs->hi, &ctx->regs[33]);
+		err |= __get_user(regs->cp0_epc, &ctx->regs[35]);
 	}
 
-	if (ctx->flags & 0x08) {
+	if (flags & 0x08)
 		/* XXX fpu context, blah... */
-		printk("Wheee, cannot restore FPU context yet...\n");
-	}
-	current->thread.irix_oldctx = ctx->link;
-	error = regs->regs[2];
+		printk(KERN_ERR "Wheee, cannot restore FPU context yet...\n");
 
-out:
-	return error;
+	err |= __get_user(current->thread.irix_oldctx, &ctx->link);
+	if (err)
+		goto segv_and_exit;
+
+	/*
+	 * Don't let your children do this ...
+	 */
+	if (current_thread_info()->flags & TIF_SYSCALL_TRACE)
+		do_syscall_trace(regs, 1);
+	__asm__ __volatile__(
+		"move\t$29,%0\n\t"
+		"j\tsyscall_exit"
+		:/* no outputs */
+		:"r" (&regs));
+		/* Unreached */
+
+segv_and_exit:
+	force_sigsegv(SIGSEGV, current);
 }
 
-struct irix_sigstack { unsigned long sp; int status; };
+struct irix_sigstack {
+	unsigned long sp;
+	int status;
+};
 
-asmlinkage int irix_sigstack(struct irix_sigstack *new, struct irix_sigstack *old)
+asmlinkage int irix_sigstack(struct irix_sigstack __user *new,
+	struct irix_sigstack __user *old)
 {
-	int error = -EFAULT;
-
 #ifdef DEBUG_SIG
 	printk("[%s:%d] irix_sigstack(%p,%p)\n",
 	       current->comm, current->pid, new, old);
 #endif
-	if(new) {
+	if (new) {
 		if (!access_ok(VERIFY_READ, new, sizeof(*new)))
-			goto out;
+			return -EFAULT;
 	}
 
-	if(old) {
+	if (old) {
 		if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
-			goto out;
+			return -EFAULT;
 	}
-	error = 0;
 
-out:
-	return error;
+	return 0;
 }
 
 struct irix_sigaltstack { unsigned long sp; int size; int status; };
 
-asmlinkage int irix_sigaltstack(struct irix_sigaltstack *new,
-				struct irix_sigaltstack *old)
+asmlinkage int irix_sigaltstack(struct irix_sigaltstack __user *new,
+				struct irix_sigaltstack __user *old)
 {
-	int error = -EFAULT;
-
 #ifdef DEBUG_SIG
 	printk("[%s:%d] irix_sigaltstack(%p,%p)\n",
 	       current->comm, current->pid, new, old);
 #endif
-	if (new) {
+	if (new)
 		if (!access_ok(VERIFY_READ, new, sizeof(*new)))
-			goto out;
-	}
+			return -EFAULT;
 
 	if (old) {
 		if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
-			goto out;
+			return -EFAULT;
 	}
-	error = 0;
-
-out:
-	error = 0;
 
-	return error;
+	return 0;
 }
 
 struct irix_procset {
 	int cmd, ltype, lid, rtype, rid;
 };
 
-asmlinkage int irix_sigsendset(struct irix_procset *pset, int sig)
+asmlinkage int irix_sigsendset(struct irix_procset __user *pset, int sig)
 {
 	if (!access_ok(VERIFY_READ, pset, sizeof(*pset)))
 		return -EFAULT;
-
 #ifdef DEBUG_SIG
 	printk("[%s:%d] irix_sigsendset([%d,%d,%d,%d,%d],%d)\n",
 	       current->comm, current->pid,
diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c
index 43c00ac0b88d..3f653c7cfbf3 100644
--- a/arch/mips/kernel/irq-msc01.c
+++ b/arch/mips/kernel/irq-msc01.c
@@ -74,7 +74,7 @@ static void disable_msc_irq(unsigned int irq)
 static void level_mask_and_ack_msc_irq(unsigned int irq)
 {
 	mask_msc_irq(irq);
-	if (!cpu_has_ei)
+	if (!cpu_has_veic)
 		MSCIC_WRITE(MSC01_IC_EOI, 0);
 }
 
@@ -84,7 +84,7 @@ static void level_mask_and_ack_msc_irq(unsigned int irq)
 static void edge_mask_and_ack_msc_irq(unsigned int irq)
 {
 	mask_msc_irq(irq);
-	if (!cpu_has_ei)
+	if (!cpu_has_veic)
 		MSCIC_WRITE(MSC01_IC_EOI, 0);
 	else {
 		u32 r;
@@ -129,25 +129,23 @@ msc_bind_eic_interrupt (unsigned int irq, unsigned int set)
 #define shutdown_msc_irq	disable_msc_irq
 
 struct hw_interrupt_type msc_levelirq_type = {
-	"SOC-it-Level",
-	startup_msc_irq,
-	shutdown_msc_irq,
-	enable_msc_irq,
-	disable_msc_irq,
-	level_mask_and_ack_msc_irq,
-	end_msc_irq,
-	NULL
+	.typename = "SOC-it-Level",
+	.startup = startup_msc_irq,
+	.shutdown = shutdown_msc_irq,
+	.enable = enable_msc_irq,
+	.disable = disable_msc_irq,
+	.ack = level_mask_and_ack_msc_irq,
+	.end = end_msc_irq,
 };
 
 struct hw_interrupt_type msc_edgeirq_type = {
-	"SOC-it-Edge",
-	startup_msc_irq,
-	shutdown_msc_irq,
-	enable_msc_irq,
-	disable_msc_irq,
-	edge_mask_and_ack_msc_irq,
-	end_msc_irq,
-	NULL
+	.typename = "SOC-it-Edge",
+	.startup =startup_msc_irq,
+	.shutdown = shutdown_msc_irq,
+	.enable = enable_msc_irq,
+	.disable = disable_msc_irq,
+	.ack = edge_mask_and_ack_msc_irq,
+	.end = end_msc_irq,
 };
 
 
@@ -168,14 +166,14 @@ void __init init_msc_irqs(unsigned int base, msc_irqmap_t *imp, int nirq)
 		switch (imp->im_type) {
 		case MSC01_IRQ_EDGE:
 			irq_desc[base+n].handler = &msc_edgeirq_type;
-			if (cpu_has_ei)
+			if (cpu_has_veic)
 				MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT);
 			else
 				MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT | imp->im_lvl);
 			break;
 		case MSC01_IRQ_LEVEL:
 			irq_desc[base+n].handler = &msc_levelirq_type;
-			if (cpu_has_ei)
+			if (cpu_has_veic)
 				MSCIC_WRITE(MSC01_IC_SUP+n*8, 0);
 			else
 				MSCIC_WRITE(MSC01_IC_SUP+n*8, imp->im_lvl);
diff --git a/arch/mips/kernel/irq-mv6434x.c b/arch/mips/kernel/irq-mv6434x.c
index 088bbbc869e6..0ac067f45cf5 100644
--- a/arch/mips/kernel/irq-mv6434x.c
+++ b/arch/mips/kernel/irq-mv6434x.c
@@ -135,14 +135,13 @@ void ll_mv64340_irq(struct pt_regs *regs)
 #define shutdown_mv64340_irq	disable_mv64340_irq
 
 struct hw_interrupt_type mv64340_irq_type = {
-	"MV-64340",
-	startup_mv64340_irq,
-	shutdown_mv64340_irq,
-	enable_mv64340_irq,
-	disable_mv64340_irq,
-	mask_and_ack_mv64340_irq,
-	end_mv64340_irq,
-	NULL
+	.typename = "MV-64340",
+	.startup = startup_mv64340_irq,
+	.shutdown = shutdown_mv64340_irq,
+	.enable = enable_mv64340_irq,
+	.disable = disable_mv64340_irq,
+	.ack = mask_and_ack_mv64340_irq,
+	.end = end_mv64340_irq,
 };
 
 void __init mv64340_irq_init(unsigned int base)
diff --git a/arch/mips/kernel/irq-rm7000.c b/arch/mips/kernel/irq-rm7000.c
index f5d779fd0355..0b130c5ac5d9 100644
--- a/arch/mips/kernel/irq-rm7000.c
+++ b/arch/mips/kernel/irq-rm7000.c
@@ -72,13 +72,13 @@ static void rm7k_cpu_irq_end(unsigned int irq)
 }
 
 static hw_irq_controller rm7k_irq_controller = {
-	"RM7000",
-	rm7k_cpu_irq_startup,
-	rm7k_cpu_irq_shutdown,
-	rm7k_cpu_irq_enable,
-	rm7k_cpu_irq_disable,
-	rm7k_cpu_irq_ack,
-	rm7k_cpu_irq_end,
+	.typename = "RM7000",
+	.startup = rm7k_cpu_irq_startup,
+	.shutdown = rm7k_cpu_irq_shutdown,
+	.enable = rm7k_cpu_irq_enable,
+	.disable = rm7k_cpu_irq_disable,
+	.ack = rm7k_cpu_irq_ack,
+	.end = rm7k_cpu_irq_end,
 };
 
 void __init rm7k_cpu_irq_init(int base)
diff --git a/arch/mips/kernel/irq-rm9000.c b/arch/mips/kernel/irq-rm9000.c
index bdd130296256..9b5f20c32acb 100644
--- a/arch/mips/kernel/irq-rm9000.c
+++ b/arch/mips/kernel/irq-rm9000.c
@@ -106,23 +106,23 @@ static void rm9k_cpu_irq_end(unsigned int irq)
 }
 
 static hw_irq_controller rm9k_irq_controller = {
-	"RM9000",
-	rm9k_cpu_irq_startup,
-	rm9k_cpu_irq_shutdown,
-	rm9k_cpu_irq_enable,
-	rm9k_cpu_irq_disable,
-	rm9k_cpu_irq_ack,
-	rm9k_cpu_irq_end,
+	.typename = "RM9000",
+	.startup = rm9k_cpu_irq_startup,
+	.shutdown = rm9k_cpu_irq_shutdown,
+	.enable = rm9k_cpu_irq_enable,
+	.disable = rm9k_cpu_irq_disable,
+	.ack = rm9k_cpu_irq_ack,
+	.end = rm9k_cpu_irq_end,
 };
 
 static hw_irq_controller rm9k_perfcounter_irq = {
-	"RM9000",
-	rm9k_perfcounter_irq_startup,
-	rm9k_perfcounter_irq_shutdown,
-	rm9k_cpu_irq_enable,
-	rm9k_cpu_irq_disable,
-	rm9k_cpu_irq_ack,
-	rm9k_cpu_irq_end,
+	.typename = "RM9000",
+	.startup = rm9k_perfcounter_irq_startup,
+	.shutdown = rm9k_perfcounter_irq_shutdown,
+	.enable = rm9k_cpu_irq_enable,
+	.disable = rm9k_cpu_irq_disable,
+	.ack = rm9k_cpu_irq_ack,
+	.end = rm9k_cpu_irq_end,
 };
 
 unsigned int rm9000_perfcount_irq;
diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c
index 2b936cf1ef70..5db67e31ec1a 100644
--- a/arch/mips/kernel/irq_cpu.c
+++ b/arch/mips/kernel/irq_cpu.c
@@ -3,6 +3,8 @@
  * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
  *
  * Copyright (C) 2001 Ralf Baechle
+ * Copyright (C) 2005  MIPS Technologies, Inc.  All rights reserved.
+ *      Author: Maciej W. Rozycki <macro@mips.com>
  *
  * This file define the irq handler for MIPS CPU interrupts.
  *
@@ -31,19 +33,21 @@
 
 #include <asm/irq_cpu.h>
 #include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
 #include <asm/system.h>
 
 static int mips_cpu_irq_base;
 
 static inline void unmask_mips_irq(unsigned int irq)
 {
-	clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
 	set_c0_status(0x100 << (irq - mips_cpu_irq_base));
+	irq_enable_hazard();
 }
 
 static inline void mask_mips_irq(unsigned int irq)
 {
 	clear_c0_status(0x100 << (irq - mips_cpu_irq_base));
+	irq_disable_hazard();
 }
 
 static inline void mips_cpu_irq_enable(unsigned int irq)
@@ -52,6 +56,7 @@ static inline void mips_cpu_irq_enable(unsigned int irq)
 
 	local_irq_save(flags);
 	unmask_mips_irq(irq);
+	back_to_back_c0_hazard();
 	local_irq_restore(flags);
 }
 
@@ -61,6 +66,7 @@ static void mips_cpu_irq_disable(unsigned int irq)
 
 	local_irq_save(flags);
 	mask_mips_irq(irq);
+	back_to_back_c0_hazard();
 	local_irq_restore(flags);
 }
 
@@ -71,7 +77,7 @@ static unsigned int mips_cpu_irq_startup(unsigned int irq)
 	return 0;
 }
 
-#define	mips_cpu_irq_shutdown	mips_cpu_irq_disable
+#define	mips_cpu_irq_shutdown		mips_cpu_irq_disable
 
 /*
  * While we ack the interrupt interrupts are disabled and thus we don't need
@@ -79,9 +85,6 @@ static unsigned int mips_cpu_irq_startup(unsigned int irq)
  */
 static void mips_cpu_irq_ack(unsigned int irq)
 {
-	/* Only necessary for soft interrupts */
-	clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
-
 	mask_mips_irq(irq);
 }
 
@@ -92,22 +95,82 @@ static void mips_cpu_irq_end(unsigned int irq)
 }
 
 static hw_irq_controller mips_cpu_irq_controller = {
-	"MIPS",
-	mips_cpu_irq_startup,
-	mips_cpu_irq_shutdown,
-	mips_cpu_irq_enable,
-	mips_cpu_irq_disable,
-	mips_cpu_irq_ack,
-	mips_cpu_irq_end,
-	NULL			/* no affinity stuff for UP */
+	.typename	= "MIPS",
+	.startup	= mips_cpu_irq_startup,
+	.shutdown	= mips_cpu_irq_shutdown,
+	.enable		= mips_cpu_irq_enable,
+	.disable	= mips_cpu_irq_disable,
+	.ack		= mips_cpu_irq_ack,
+	.end		= mips_cpu_irq_end,
 };
 
+/*
+ * Basically the same as above but taking care of all the MT stuff
+ */
+
+#define unmask_mips_mt_irq	unmask_mips_irq
+#define mask_mips_mt_irq	mask_mips_irq
+#define mips_mt_cpu_irq_enable	mips_cpu_irq_enable
+#define mips_mt_cpu_irq_disable	mips_cpu_irq_disable
+
+static unsigned int mips_mt_cpu_irq_startup(unsigned int irq)
+{
+	unsigned int vpflags = dvpe();
+
+	clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
+	evpe(vpflags);
+	mips_mt_cpu_irq_enable(irq);
+
+	return 0;
+}
+
+#define	mips_mt_cpu_irq_shutdown	mips_mt_cpu_irq_disable
+
+/*
+ * While we ack the interrupt interrupts are disabled and thus we don't need
+ * to deal with concurrency issues.  Same for mips_cpu_irq_end.
+ */
+static void mips_mt_cpu_irq_ack(unsigned int irq)
+{
+	unsigned int vpflags = dvpe();
+	clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
+	evpe(vpflags);
+	mask_mips_mt_irq(irq);
+}
+
+#define mips_mt_cpu_irq_end mips_cpu_irq_end
+
+static hw_irq_controller mips_mt_cpu_irq_controller = {
+	.typename	= "MIPS",
+	.startup	= mips_mt_cpu_irq_startup,
+	.shutdown	= mips_mt_cpu_irq_shutdown,
+	.enable		= mips_mt_cpu_irq_enable,
+	.disable	= mips_mt_cpu_irq_disable,
+	.ack		= mips_mt_cpu_irq_ack,
+	.end		= mips_mt_cpu_irq_end,
+};
 
 void __init mips_cpu_irq_init(int irq_base)
 {
 	int i;
 
-	for (i = irq_base; i < irq_base + 8; i++) {
+	/* Mask interrupts. */
+	clear_c0_status(ST0_IM);
+	clear_c0_cause(CAUSEF_IP);
+
+	/*
+	 * Only MT is using the software interrupts currently, so we just
+	 * leave them uninitialized for other processors.
+	 */
+	if (cpu_has_mipsmt)
+		for (i = irq_base; i < irq_base + 2; i++) {
+			irq_desc[i].status = IRQ_DISABLED;
+			irq_desc[i].action = NULL;
+			irq_desc[i].depth = 1;
+			irq_desc[i].handler = &mips_mt_cpu_irq_controller;
+		}
+
+	for (i = irq_base + 2; i < irq_base + 8; i++) {
 		irq_desc[i].status = IRQ_DISABLED;
 		irq_desc[i].action = NULL;
 		irq_desc[i].depth = 1;
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index ece4564919d8..330cf84d21fe 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -215,81 +215,32 @@ sys32_readdir(unsigned int fd, void * dirent32, unsigned int count)
 	return(n);
 }
 
-struct rusage32 {
-        struct compat_timeval ru_utime;
-        struct compat_timeval ru_stime;
-        int    ru_maxrss;
-        int    ru_ixrss;
-        int    ru_idrss;
-        int    ru_isrss;
-        int    ru_minflt;
-        int    ru_majflt;
-        int    ru_nswap;
-        int    ru_inblock;
-        int    ru_oublock;
-        int    ru_msgsnd;
-        int    ru_msgrcv;
-        int    ru_nsignals;
-        int    ru_nvcsw;
-        int    ru_nivcsw;
-};
-
-static int
-put_rusage (struct rusage32 *ru, struct rusage *r)
+asmlinkage int
+sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr, int options)
 {
-	int err;
-
-	if (!access_ok(VERIFY_WRITE, ru, sizeof *ru))
-		return -EFAULT;
-
-	err = __put_user (r->ru_utime.tv_sec, &ru->ru_utime.tv_sec);
-	err |= __put_user (r->ru_utime.tv_usec, &ru->ru_utime.tv_usec);
-	err |= __put_user (r->ru_stime.tv_sec, &ru->ru_stime.tv_sec);
-	err |= __put_user (r->ru_stime.tv_usec, &ru->ru_stime.tv_usec);
-	err |= __put_user (r->ru_maxrss, &ru->ru_maxrss);
-	err |= __put_user (r->ru_ixrss, &ru->ru_ixrss);
-	err |= __put_user (r->ru_idrss, &ru->ru_idrss);
-	err |= __put_user (r->ru_isrss, &ru->ru_isrss);
-	err |= __put_user (r->ru_minflt, &ru->ru_minflt);
-	err |= __put_user (r->ru_majflt, &ru->ru_majflt);
-	err |= __put_user (r->ru_nswap, &ru->ru_nswap);
-	err |= __put_user (r->ru_inblock, &ru->ru_inblock);
-	err |= __put_user (r->ru_oublock, &ru->ru_oublock);
-	err |= __put_user (r->ru_msgsnd, &ru->ru_msgsnd);
-	err |= __put_user (r->ru_msgrcv, &ru->ru_msgrcv);
-	err |= __put_user (r->ru_nsignals, &ru->ru_nsignals);
-	err |= __put_user (r->ru_nvcsw, &ru->ru_nvcsw);
-	err |= __put_user (r->ru_nivcsw, &ru->ru_nivcsw);
-
-	return err;
+	return compat_sys_wait4(pid, stat_addr, options, NULL);
 }
 
-asmlinkage int
-sys32_wait4(compat_pid_t pid, unsigned int * stat_addr, int options,
-	    struct rusage32 * ru)
+asmlinkage long
+sysn32_waitid(int which, compat_pid_t pid,
+	      siginfo_t __user *uinfo, int options,
+	      struct compat_rusage __user *uru)
 {
-	if (!ru)
-		return sys_wait4(pid, stat_addr, options, NULL);
-	else {
-		struct rusage r;
-		int ret;
-		unsigned int status;
-		mm_segment_t old_fs = get_fs();
+	struct rusage ru;
+	long ret;
+	mm_segment_t old_fs = get_fs();
 
-		set_fs(KERNEL_DS);
-		ret = sys_wait4(pid, stat_addr ? &status : NULL, options, &r);
-		set_fs(old_fs);
-		if (put_rusage (ru, &r)) return -EFAULT;
-		if (stat_addr && put_user (status, stat_addr))
-			return -EFAULT;
+	set_fs (KERNEL_DS);
+	ret = sys_waitid(which, pid, uinfo, options,
+			 uru ? (struct rusage __user *) &ru : NULL);
+	set_fs (old_fs);
+
+	if (ret < 0 || uinfo->si_signo == 0)
 		return ret;
-	}
-}
 
-asmlinkage int
-sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr, int options)
-{
-	return sys32_wait4(pid, stat_addr, options, NULL);
+	if (uru)
+		ret = put_compat_rusage(&ru, uru);
+	return ret;
 }
 
 struct sysinfo32 {
@@ -1467,3 +1418,80 @@ asmlinkage long sys32_socketcall(int call, unsigned int *args32)
 	}
 	return err;
 }
+
+struct sigevent32 {
+	u32 sigev_value;
+	u32 sigev_signo;
+	u32 sigev_notify;
+	u32 payload[(64 / 4) - 3];
+};
+
+extern asmlinkage long
+sys_timer_create(clockid_t which_clock,
+		 struct sigevent __user *timer_event_spec,
+		 timer_t __user * created_timer_id);
+
+long
+sys32_timer_create(u32 clock, struct sigevent32 __user *se32, timer_t __user *timer_id)
+{
+	struct sigevent __user *p = NULL;
+	if (se32) {
+		struct sigevent se;
+		p = compat_alloc_user_space(sizeof(struct sigevent));
+		memset(&se, 0, sizeof(struct sigevent));
+		if (get_user(se.sigev_value.sival_int,  &se32->sigev_value) ||
+		    __get_user(se.sigev_signo, &se32->sigev_signo) ||
+		    __get_user(se.sigev_notify, &se32->sigev_notify) ||
+		    __copy_from_user(&se._sigev_un._pad, &se32->payload,
+				     sizeof(se32->payload)) ||
+		    copy_to_user(p, &se, sizeof(se)))
+			return -EFAULT;
+	}
+	return sys_timer_create(clock, p, timer_id);
+}
+
+asmlinkage long
+sysn32_rt_sigtimedwait(const sigset_t __user *uthese,
+		       siginfo_t __user *uinfo,
+		       const struct compat_timespec __user *uts32,
+		       size_t sigsetsize)
+{
+	struct timespec __user *uts = NULL;
+
+	if (uts32) {
+		struct timespec ts;
+		uts = compat_alloc_user_space(sizeof(struct timespec));
+		if (get_user(ts.tv_sec, &uts32->tv_sec) ||
+		    get_user(ts.tv_nsec, &uts32->tv_nsec) ||
+		    copy_to_user (uts, &ts, sizeof (ts)))
+			return -EFAULT;
+	}
+	return sys_rt_sigtimedwait(uthese, uinfo, uts, sigsetsize);
+}
+
+save_static_function(sys32_clone);
+__attribute_used__ noinline static int
+_sys32_clone(nabi_no_regargs struct pt_regs regs)
+{
+	unsigned long clone_flags;
+	unsigned long newsp;
+	int __user *parent_tidptr, *child_tidptr;
+
+	clone_flags = regs.regs[4];
+	newsp = regs.regs[5];
+	if (!newsp)
+		newsp = regs.regs[29];
+	parent_tidptr = (int *) regs.regs[6];
+
+	/* Use __dummy4 instead of getting it off the stack, so that
+	   syscall() works.  */
+	child_tidptr = (int __user *) __dummy4;
+	return do_fork(clone_flags, newsp, &regs, 0,
+	               parent_tidptr, child_tidptr);
+}
+
+extern asmlinkage void sys_set_thread_area(u32 addr);
+asmlinkage void sys32_set_thread_area(u32 addr)
+{
+	sys_set_thread_area(AA(addr));
+}
diff --git a/arch/mips/kernel/module-elf32.c b/arch/mips/kernel/module-elf32.c
deleted file mode 100644
index ffd216d6d6dc..000000000000
--- a/arch/mips/kernel/module-elf32.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *  Copyright (C) 2001 Rusty Russell.
- *  Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
- */
-
-#undef DEBUG
-
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-struct mips_hi16 {
-	struct mips_hi16 *next;
-	Elf32_Addr *addr;
-	Elf32_Addr value;
-};
-
-static struct mips_hi16 *mips_hi16_list;
-
-void *module_alloc(unsigned long size)
-{
-	if (size == 0)
-		return NULL;
-	return vmalloc(size);
-}
-
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
-}
-
-int module_frob_arch_sections(Elf_Ehdr *hdr,
-			      Elf_Shdr *sechdrs,
-			      char *secstrings,
-			      struct module *mod)
-{
-	return 0;
-}
-
-static int apply_r_mips_none(struct module *me, uint32_t *location,
-	Elf32_Addr v)
-{
-	return 0;
-}
-
-static int apply_r_mips_32(struct module *me, uint32_t *location,
-	Elf32_Addr v)
-{
-	*location += v;
-
-	return 0;
-}
-
-static int apply_r_mips_26(struct module *me, uint32_t *location,
-	Elf32_Addr v)
-{
-	if (v % 4) {
-		printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
-		return -ENOEXEC;
-	}
-
-	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
-		printk(KERN_ERR
-		       "module %s: relocation overflow\n",
-		       me->name);
-		return -ENOEXEC;
-	}
-
-	*location = (*location & ~0x03ffffff) |
-	            ((*location + (v >> 2)) & 0x03ffffff);
-
-	return 0;
-}
-
-static int apply_r_mips_hi16(struct module *me, uint32_t *location,
-	Elf32_Addr v)
-{
-	struct mips_hi16 *n;
-
-	/*
-	 * We cannot relocate this one now because we don't know the value of
-	 * the carry we need to add.  Save the information, and let LO16 do the
-	 * actual relocation.
-	 */
-	n = kmalloc(sizeof *n, GFP_KERNEL);
-	if (!n)
-		return -ENOMEM;
-
-	n->addr = location;
-	n->value = v;
-	n->next = mips_hi16_list;
-	mips_hi16_list = n;
-
-	return 0;
-}
-
-static int apply_r_mips_lo16(struct module *me, uint32_t *location,
-	Elf32_Addr v)
-{
-	unsigned long insnlo = *location;
-	Elf32_Addr val, vallo;
-
-	/* Sign extend the addend we extract from the lo insn.  */
-	vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
-
-	if (mips_hi16_list != NULL) {
-		struct mips_hi16 *l;
-
-		l = mips_hi16_list;
-		while (l != NULL) {
-			struct mips_hi16 *next;
-			unsigned long insn;
-
-			/*
-			 * The value for the HI16 had best be the same.
-			 */
-			if (v != l->value)
-				goto out_danger;
-
-			/*
-			 * Do the HI16 relocation.  Note that we actually don't
-			 * need to know anything about the LO16 itself, except
-			 * where to find the low 16 bits of the addend needed
-			 * by the LO16.
-			 */
-			insn = *l->addr;
-			val = ((insn & 0xffff) << 16) + vallo;
-			val += v;
-
-			/*
-			 * Account for the sign extension that will happen in
-			 * the low bits.
-			 */
-			val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
-
-			insn = (insn & ~0xffff) | val;
-			*l->addr = insn;
-
-			next = l->next;
-			kfree(l);
-			l = next;
-		}
-
-		mips_hi16_list = NULL;
-	}
-
-	/*
-	 * Ok, we're done with the HI16 relocs.  Now deal with the LO16.
-	 */
-	val = v + vallo;
-	insnlo = (insnlo & ~0xffff) | (val & 0xffff);
-	*location = insnlo;
-
-	return 0;
-
-out_danger:
-	printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
-
-	return -ENOEXEC;
-}
-
-static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
-	Elf32_Addr v) = {
-	[R_MIPS_NONE]	= apply_r_mips_none,
-	[R_MIPS_32]	= apply_r_mips_32,
-	[R_MIPS_26]	= apply_r_mips_26,
-	[R_MIPS_HI16]	= apply_r_mips_hi16,
-	[R_MIPS_LO16]	= apply_r_mips_lo16
-};
-
-int apply_relocate(Elf32_Shdr *sechdrs,
-		   const char *strtab,
-		   unsigned int symindex,
-		   unsigned int relsec,
-		   struct module *me)
-{
-	Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr;
-	Elf32_Sym *sym;
-	uint32_t *location;
-	unsigned int i;
-	Elf32_Addr v;
-	int res;
-
-	pr_debug("Applying relocate section %u to %u\n", relsec,
-	       sechdrs[relsec].sh_info);
-
-	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
-		Elf32_Word r_info = rel[i].r_info;
-
-		/* This is where to make the change */
-		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
-			+ rel[i].r_offset;
-		/* This is the symbol it is referring to */
-		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
-			+ ELF32_R_SYM(r_info);
-		if (!sym->st_value) {
-			printk(KERN_WARNING "%s: Unknown symbol %s\n",
-			       me->name, strtab + sym->st_name);
-			return -ENOENT;
-		}
-
-		v = sym->st_value;
-
-		res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
-		if (res)
-			return res;
-	}
-
-	return 0;
-}
-
-int apply_relocate_add(Elf32_Shdr *sechdrs,
-		       const char *strtab,
-		       unsigned int symindex,
-		       unsigned int relsec,
-		       struct module *me)
-{
-	/*
-	 * Current binutils always generate .rela relocations.  Keep smiling
-	 * if it's empty, abort otherwise.
-	 */
-	if (!sechdrs[relsec].sh_size)
-		return 0;
-
-	printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n",
-	       me->name);
-	return -ENOEXEC;
-}
diff --git a/arch/mips/kernel/module-elf64.c b/arch/mips/kernel/module-elf64.c
deleted file mode 100644
index e804792ee1ee..000000000000
--- a/arch/mips/kernel/module-elf64.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *  Copyright (C) 2001 Rusty Russell.
- *  Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
- */
-
-#undef DEBUG
-
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-struct mips_hi16 {
-	struct mips_hi16 *next;
-	Elf32_Addr *addr;
-	Elf64_Addr value;
-};
-
-static struct mips_hi16 *mips_hi16_list;
-
-void *module_alloc(unsigned long size)
-{
-	if (size == 0)
-		return NULL;
-	return vmalloc(size);
-}
-
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
-}
-
-int module_frob_arch_sections(Elf_Ehdr *hdr,
-			      Elf_Shdr *sechdrs,
-			      char *secstrings,
-			      struct module *mod)
-{
-	return 0;
-}
-
-int apply_relocate(Elf64_Shdr *sechdrs,
-		   const char *strtab,
-		   unsigned int symindex,
-		   unsigned int relsec,
-		   struct module *me)
-{
-	/*
-	 * We don't want to deal with REL relocations - RELA is so much saner.
-	 */
-	if (!sechdrs[relsec].sh_size)
-		return 0;
-
-	printk(KERN_ERR "module %s: REL relocation unsupported\n",
-	       me->name);
-	return -ENOEXEC;
-}
-
-static int apply_r_mips_none(struct module *me, uint32_t *location,
-	Elf64_Addr v)
-{
-	return 0;
-}
-
-static int apply_r_mips_32(struct module *me, uint32_t *location,
-	Elf64_Addr v)
-{
-	*location = v;
-
-	return 0;
-}
-
-static int apply_r_mips_26(struct module *me, uint32_t *location,
-	Elf64_Addr v)
-{
-	if (v % 4) {
-		printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
-		return -ENOEXEC;
-	}
-
-	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
-		printk(KERN_ERR
-		       "module %s: relocation overflow\n",
-		       me->name);
-		return -ENOEXEC;
-	}
-
-	*location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
-
-	return 0;
-}
-
-static int apply_r_mips_hi16(struct module *me, uint32_t *location,
-	Elf64_Addr v)
-{
-	struct mips_hi16 *n;
-
-	/*
-	 * We cannot relocate this one now because we don't know the value of
-	 * the carry we need to add.  Save the information, and let LO16 do the
-	 * actual relocation.
-	 */
-	n = kmalloc(sizeof *n, GFP_KERNEL);
-	if (!n)
-		return -ENOMEM;
-
-	n->addr = location;
-	n->value = v;
-	n->next = mips_hi16_list;
-	mips_hi16_list = n;
-
-	return 0;
-}
-
-static int apply_r_mips_lo16(struct module *me, uint32_t *location,
-	Elf64_Addr v)
-{
-	unsigned long insnlo = *location;
-	Elf32_Addr val, vallo;
-
-	/* Sign extend the addend we extract from the lo insn.  */
-	vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
-
-	if (mips_hi16_list != NULL) {
-		struct mips_hi16 *l;
-
-		l = mips_hi16_list;
-		while (l != NULL) {
-			struct mips_hi16 *next;
-			unsigned long insn;
-
-			/*
-			 * The value for the HI16 had best be the same.
-			 */
-			if (v != l->value)
-				goto out_danger;
-
-			/*
-			 * Do the HI16 relocation.  Note that we actually don't
-			 * need to know anything about the LO16 itself, except
-			 * where to find the low 16 bits of the addend needed
-			 * by the LO16.
-			 */
-			insn = *l->addr;
-			val = ((insn & 0xffff) << 16) + vallo;
-			val += v;
-
-			/*
-			 * Account for the sign extension that will happen in
-			 * the low bits.
-			 */
-			val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
-
-			insn = (insn & ~0xffff) | val;
-			*l->addr = insn;
-
-			next = l->next;
-			kfree(l);
-			l = next;
-		}
-
-		mips_hi16_list = NULL;
-	}
-
-	/*
-	 * Ok, we're done with the HI16 relocs.  Now deal with the LO16.
-	 */
-	insnlo = (insnlo & ~0xffff) | (v & 0xffff);
-	*location = insnlo;
-
-	return 0;
-
-out_danger:
-	printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
-
-	return -ENOEXEC;
-}
-
-static int apply_r_mips_64(struct module *me, uint32_t *location,
-	Elf64_Addr v)
-{
-	*(uint64_t *) location = v;
-
-	return 0;
-}
-
-
-static int apply_r_mips_higher(struct module *me, uint32_t *location,
-	Elf64_Addr v)
-{
-	*location = (*location & 0xffff0000) |
-	            ((((long long) v + 0x80008000LL) >> 32) & 0xffff);
-
-	return 0;
-}
-
-static int apply_r_mips_highest(struct module *me, uint32_t *location,
-	Elf64_Addr v)
-{
-	*location = (*location & 0xffff0000) |
-	            ((((long long) v + 0x800080008000LL) >> 48) & 0xffff);
-
-	return 0;
-}
-
-static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
-	Elf64_Addr v) = {
-	[R_MIPS_NONE]		= apply_r_mips_none,
-	[R_MIPS_32]		= apply_r_mips_32,
-	[R_MIPS_26]		= apply_r_mips_26,
-	[R_MIPS_HI16]		= apply_r_mips_hi16,
-	[R_MIPS_LO16]		= apply_r_mips_lo16,
-	[R_MIPS_64]		= apply_r_mips_64,
-	[R_MIPS_HIGHER]		= apply_r_mips_higher,
-	[R_MIPS_HIGHEST]	= apply_r_mips_highest
-};
-
-int apply_relocate_add(Elf64_Shdr *sechdrs,
-		       const char *strtab,
-		       unsigned int symindex,
-		       unsigned int relsec,
-		       struct module *me)
-{
-	Elf64_Mips_Rela *rel = (void *) sechdrs[relsec].sh_addr;
-	Elf64_Sym *sym;
-	uint32_t *location;
-	unsigned int i;
-	Elf64_Addr v;
-	int res;
-
-	pr_debug("Applying relocate section %u to %u\n", relsec,
-	       sechdrs[relsec].sh_info);
-
-	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
-		/* This is where to make the change */
-		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
-			+ rel[i].r_offset;
-		/* This is the symbol it is referring to */
-		sym = (Elf64_Sym *)sechdrs[symindex].sh_addr + rel[i].r_sym;
-		if (!sym->st_value) {
-			printk(KERN_WARNING "%s: Unknown symbol %s\n",
-			       me->name, strtab + sym->st_name);
-			return -ENOENT;
-		}
-
-		v = sym->st_value;
-
-		res = reloc_handlers[rel[i].r_type](me, location, v);
-		if (res)
-			return res;
-	}
-
-	return 0;
-}
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 458af3c7a639..e54a7f442f8a 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -1,9 +1,345 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *  Copyright (C) 2001 Rusty Russell.
+ *  Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
+ *  Copyright (C) 2005 Thiemo Seufer
+ */
+
+#undef DEBUG
+
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
 
+struct mips_hi16 {
+	struct mips_hi16 *next;
+	Elf_Addr *addr;
+	Elf_Addr value;
+};
+
+static struct mips_hi16 *mips_hi16_list;
+
 static LIST_HEAD(dbe_list);
 static DEFINE_SPINLOCK(dbe_lock);
 
+void *module_alloc(unsigned long size)
+{
+	if (size == 0)
+		return NULL;
+	return vmalloc(size);
+}
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+	vfree(module_region);
+	/* FIXME: If module_region == mod->init_region, trim exception
+           table entries. */
+}
+
+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+			      char *secstrings, struct module *mod)
+{
+	return 0;
+}
+
+static int apply_r_mips_none(struct module *me, u32 *location, Elf_Addr v)
+{
+	return 0;
+}
+
+static int apply_r_mips_32_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+	*location += v;
+
+	return 0;
+}
+
+static int apply_r_mips_32_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+	*location = v;
+
+	return 0;
+}
+
+static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+	if (v % 4) {
+		printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
+		return -ENOEXEC;
+	}
+
+	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+		printk(KERN_ERR
+		       "module %s: relocation overflow\n",
+		       me->name);
+		return -ENOEXEC;
+	}
+
+	*location = (*location & ~0x03ffffff) |
+	            ((*location + (v >> 2)) & 0x03ffffff);
+
+	return 0;
+}
+
+static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+	if (v % 4) {
+		printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
+		return -ENOEXEC;
+	}
+
+	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+		printk(KERN_ERR
+		       "module %s: relocation overflow\n",
+		       me->name);
+		return -ENOEXEC;
+	}
+
+	*location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
+
+	return 0;
+}
+
+static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+	struct mips_hi16 *n;
+
+	/*
+	 * We cannot relocate this one now because we don't know the value of
+	 * the carry we need to add.  Save the information, and let LO16 do the
+	 * actual relocation.
+	 */
+	n = kmalloc(sizeof *n, GFP_KERNEL);
+	if (!n)
+		return -ENOMEM;
+
+	n->addr = (Elf_Addr *)location;
+	n->value = v;
+	n->next = mips_hi16_list;
+	mips_hi16_list = n;
+
+	return 0;
+}
+
+static int apply_r_mips_hi16_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+	*location = (*location & 0xffff0000) |
+	            ((((long long) v + 0x8000LL) >> 16) & 0xffff);
+
+	return 0;
+}
+
+static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+	unsigned long insnlo = *location;
+	Elf_Addr val, vallo;
+
+	/* Sign extend the addend we extract from the lo insn.  */
+	vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
+
+	if (mips_hi16_list != NULL) {
+		struct mips_hi16 *l;
+
+		l = mips_hi16_list;
+		while (l != NULL) {
+			struct mips_hi16 *next;
+			unsigned long insn;
+
+			/*
+			 * The value for the HI16 had best be the same.
+			 */
+			if (v != l->value)
+				goto out_danger;
+
+			/*
+			 * Do the HI16 relocation.  Note that we actually don't
+			 * need to know anything about the LO16 itself, except
+			 * where to find the low 16 bits of the addend needed
+			 * by the LO16.
+			 */
+			insn = *l->addr;
+			val = ((insn & 0xffff) << 16) + vallo;
+			val += v;
+
+			/*
+			 * Account for the sign extension that will happen in
+			 * the low bits.
+			 */
+			val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
+
+			insn = (insn & ~0xffff) | val;
+			*l->addr = insn;
+
+			next = l->next;
+			kfree(l);
+			l = next;
+		}
+
+		mips_hi16_list = NULL;
+	}
+
+	/*
+	 * Ok, we're done with the HI16 relocs.  Now deal with the LO16.
+	 */
+	val = v + vallo;
+	insnlo = (insnlo & ~0xffff) | (val & 0xffff);
+	*location = insnlo;
+
+	return 0;
+
+out_danger:
+	printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
+
+	return -ENOEXEC;
+}
+
+static int apply_r_mips_lo16_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+	*location = (*location & 0xffff0000) | (v & 0xffff);
+
+	return 0;
+}
+
+static int apply_r_mips_64_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+	*(Elf_Addr *)location = v;
+
+	return 0;
+}
+
+static int apply_r_mips_higher_rela(struct module *me, u32 *location,
+				    Elf_Addr v)
+{
+	*location = (*location & 0xffff0000) |
+	            ((((long long) v + 0x80008000LL) >> 32) & 0xffff);
+
+	return 0;
+}
+
+static int apply_r_mips_highest_rela(struct module *me, u32 *location,
+				     Elf_Addr v)
+{
+	*location = (*location & 0xffff0000) |
+	            ((((long long) v + 0x800080008000LL) >> 48) & 0xffff);
+
+	return 0;
+}
+
+static int (*reloc_handlers_rel[]) (struct module *me, u32 *location,
+				Elf_Addr v) = {
+	[R_MIPS_NONE]		= apply_r_mips_none,
+	[R_MIPS_32]		= apply_r_mips_32_rel,
+	[R_MIPS_26]		= apply_r_mips_26_rel,
+	[R_MIPS_HI16]		= apply_r_mips_hi16_rel,
+	[R_MIPS_LO16]		= apply_r_mips_lo16_rel
+};
+
+static int (*reloc_handlers_rela[]) (struct module *me, u32 *location,
+				Elf_Addr v) = {
+	[R_MIPS_NONE]		= apply_r_mips_none,
+	[R_MIPS_32]		= apply_r_mips_32_rela,
+	[R_MIPS_26]		= apply_r_mips_26_rela,
+	[R_MIPS_HI16]		= apply_r_mips_hi16_rela,
+	[R_MIPS_LO16]		= apply_r_mips_lo16_rela,
+	[R_MIPS_64]		= apply_r_mips_64_rela,
+	[R_MIPS_HIGHER]		= apply_r_mips_higher_rela,
+	[R_MIPS_HIGHEST]	= apply_r_mips_highest_rela
+};
+
+int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
+		   unsigned int symindex, unsigned int relsec,
+		   struct module *me)
+{
+	Elf_Mips_Rel *rel = (void *) sechdrs[relsec].sh_addr;
+	Elf_Sym *sym;
+	u32 *location;
+	unsigned int i;
+	Elf_Addr v;
+	int res;
+
+	pr_debug("Applying relocate section %u to %u\n", relsec,
+	       sechdrs[relsec].sh_info);
+
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		/* This is where to make the change */
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+		/* This is the symbol it is referring to */
+		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+			+ ELF_MIPS_R_SYM(rel[i]);
+		if (!sym->st_value) {
+			printk(KERN_WARNING "%s: Unknown symbol %s\n",
+			       me->name, strtab + sym->st_name);
+			return -ENOENT;
+		}
+
+		v = sym->st_value;
+
+		res = reloc_handlers_rel[ELF_MIPS_R_TYPE(rel[i])](me, location, v);
+		if (res)
+			return res;
+	}
+
+	return 0;
+}
+
+int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
+		       unsigned int symindex, unsigned int relsec,
+		       struct module *me)
+{
+	Elf_Mips_Rela *rel = (void *) sechdrs[relsec].sh_addr;
+	Elf_Sym *sym;
+	u32 *location;
+	unsigned int i;
+	Elf_Addr v;
+	int res;
+
+	pr_debug("Applying relocate section %u to %u\n", relsec,
+	       sechdrs[relsec].sh_info);
+
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		/* This is where to make the change */
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+		/* This is the symbol it is referring to */
+		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+			+ ELF_MIPS_R_SYM(rel[i]);
+		if (!sym->st_value) {
+			printk(KERN_WARNING "%s: Unknown symbol %s\n",
+			       me->name, strtab + sym->st_name);
+			return -ENOENT;
+		}
+
+		v = sym->st_value + rel[i].r_addend;
+
+		res = reloc_handlers_rela[ELF_MIPS_R_TYPE(rel[i])](me, location, v);
+		if (res)
+			return res;
+	}
+
+	return 0;
+}
+
 /* Given an address, look for it in the module exception tables. */
 const struct exception_table_entry *search_module_dbetables(unsigned long addr)
 {
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 0f159f30e894..86fe15b273cd 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -2,7 +2,8 @@
  *  linux/arch/mips/kernel/proc.c
  *
  *  Copyright (C) 1995, 1996, 2001  Ralf Baechle
- *  Copyright (C) 2001  MIPS Technologies, Inc.
+ *  Copyright (C) 2001, 2004  MIPS Technologies, Inc.
+ *  Copyright (C) 2004  Maciej W. Rozycki
  */
 #include <linux/config.h>
 #include <linux/delay.h>
@@ -19,63 +20,69 @@
 unsigned int vced_count, vcei_count;
 
 static const char *cpu_name[] = {
-	[CPU_UNKNOWN]	"unknown",
-	[CPU_R2000]	"R2000",
-	[CPU_R3000]	"R3000",
-	[CPU_R3000A]	"R3000A",
-	[CPU_R3041]	"R3041",
-	[CPU_R3051]	"R3051",
-	[CPU_R3052]	"R3052",
-	[CPU_R3081]	"R3081",
-	[CPU_R3081E]	"R3081E",
-	[CPU_R4000PC]	"R4000PC",
-	[CPU_R4000SC]	"R4000SC",
-	[CPU_R4000MC]	"R4000MC",
-        [CPU_R4200]	"R4200",
-	[CPU_R4400PC]	"R4400PC",
-	[CPU_R4400SC]	"R4400SC",
-	[CPU_R4400MC]	"R4400MC",
-	[CPU_R4600]	"R4600",
-	[CPU_R6000]	"R6000",
-        [CPU_R6000A]	"R6000A",
-	[CPU_R8000]	"R8000",
-	[CPU_R10000]	"R10000",
-	[CPU_R12000]	"R12000",
-	[CPU_R4300]	"R4300",
-	[CPU_R4650]	"R4650",
-	[CPU_R4700]	"R4700",
-	[CPU_R5000]	"R5000",
-        [CPU_R5000A]	"R5000A",
-	[CPU_R4640]	"R4640",
-	[CPU_NEVADA]	"Nevada",
-	[CPU_RM7000]	"RM7000",
-	[CPU_RM9000]	"RM9000",
-	[CPU_R5432]	"R5432",
-	[CPU_4KC]	"MIPS 4Kc",
-        [CPU_5KC]	"MIPS 5Kc",
-	[CPU_R4310]	"R4310",
-	[CPU_SB1]	"SiByte SB1",
-	[CPU_TX3912]	"TX3912",
-	[CPU_TX3922]	"TX3922",
-	[CPU_TX3927]	"TX3927",
-	[CPU_AU1000]	"Au1000",
-	[CPU_AU1500]	"Au1500",
-	[CPU_4KEC]	"MIPS 4KEc",
-	[CPU_4KSC]	"MIPS 4KSc",
-	[CPU_VR41XX]	"NEC Vr41xx",
-	[CPU_R5500]	"R5500",
-	[CPU_TX49XX]	"TX49xx",
-	[CPU_20KC]	"MIPS 20Kc",
-	[CPU_24K]	"MIPS 24K",
-	[CPU_25KF]	"MIPS 25Kf",
-	[CPU_VR4111]	"NEC VR4111",
-	[CPU_VR4121]	"NEC VR4121",
-	[CPU_VR4122]	"NEC VR4122",
-	[CPU_VR4131]	"NEC VR4131",
-	[CPU_VR4133]	"NEC VR4133",
-	[CPU_VR4181]	"NEC VR4181",
-	[CPU_VR4181A]	"NEC VR4181A",
-	[CPU_SR71000]	"Sandcraft SR71000"
+	[CPU_UNKNOWN]	= "unknown",
+	[CPU_R2000]	= "R2000",
+	[CPU_R3000]	= "R3000",
+	[CPU_R3000A]	= "R3000A",
+	[CPU_R3041]	= "R3041",
+	[CPU_R3051]	= "R3051",
+	[CPU_R3052]	= "R3052",
+	[CPU_R3081]	= "R3081",
+	[CPU_R3081E]	= "R3081E",
+	[CPU_R4000PC]	= "R4000PC",
+	[CPU_R4000SC]	= "R4000SC",
+	[CPU_R4000MC]	= "R4000MC",
+        [CPU_R4200]	= "R4200",
+	[CPU_R4400PC]	= "R4400PC",
+	[CPU_R4400SC]	= "R4400SC",
+	[CPU_R4400MC]	= "R4400MC",
+	[CPU_R4600]	= "R4600",
+	[CPU_R6000]	= "R6000",
+        [CPU_R6000A]	= "R6000A",
+	[CPU_R8000]	= "R8000",
+	[CPU_R10000]	= "R10000",
+	[CPU_R12000]	= "R12000",
+	[CPU_R4300]	= "R4300",
+	[CPU_R4650]	= "R4650",
+	[CPU_R4700]	= "R4700",
+	[CPU_R5000]	= "R5000",
+        [CPU_R5000A]	= "R5000A",
+	[CPU_R4640]	= "R4640",
+	[CPU_NEVADA]	= "Nevada",
+	[CPU_RM7000]	= "RM7000",
+	[CPU_RM9000]	= "RM9000",
+	[CPU_R5432]	= "R5432",
+	[CPU_4KC]	= "MIPS 4Kc",
+        [CPU_5KC]	= "MIPS 5Kc",
+	[CPU_R4310]	= "R4310",
+	[CPU_SB1]	= "SiByte SB1",
+	[CPU_SB1A]	= "SiByte SB1A",
+	[CPU_TX3912]	= "TX3912",
+	[CPU_TX3922]	= "TX3922",
+	[CPU_TX3927]	= "TX3927",
+	[CPU_AU1000]	= "Au1000",
+	[CPU_AU1500]	= "Au1500",
+	[CPU_AU1100]	= "Au1100",
+	[CPU_AU1550]	= "Au1550",
+	[CPU_AU1200]	= "Au1200",
+	[CPU_4KEC]	= "MIPS 4KEc",
+	[CPU_4KSC]	= "MIPS 4KSc",
+	[CPU_VR41XX]	= "NEC Vr41xx",
+	[CPU_R5500]	= "R5500",
+	[CPU_TX49XX]	= "TX49xx",
+	[CPU_20KC]	= "MIPS 20Kc",
+	[CPU_24K]	= "MIPS 24K",
+	[CPU_25KF]	= "MIPS 25Kf",
+	[CPU_34K]	= "MIPS 34K",
+	[CPU_VR4111]	= "NEC VR4111",
+	[CPU_VR4121]	= "NEC VR4121",
+	[CPU_VR4122]	= "NEC VR4122",
+	[CPU_VR4131]	= "NEC VR4131",
+	[CPU_VR4133]	= "NEC VR4133",
+	[CPU_VR4181]	= "NEC VR4181",
+	[CPU_VR4181A]	= "NEC VR4181A",
+	[CPU_SR71000]	= "Sandcraft SR71000",
+	[CPU_PR4450]	= "Philips PR4450",
 };
 
 
@@ -105,8 +112,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	                           (version >> 4) & 0x0f, version & 0x0f,
 	                           (fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
 	seq_printf(m, "BogoMIPS\t\t: %lu.%02lu\n",
-	              loops_per_jiffy / (500000/HZ),
-	              (loops_per_jiffy / (5000/HZ)) % 100);
+	              cpu_data[n].udelay_val / (500000/HZ),
+	              (cpu_data[n].udelay_val / (5000/HZ)) % 100);
 	seq_printf(m, "wait instruction\t: %s\n", cpu_wait ? "yes" : "no");
 	seq_printf(m, "microsecond timers\t: %s\n",
 	              cpu_has_counter ? "yes" : "no");
@@ -115,6 +122,14 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	              cpu_has_divec ? "yes" : "no");
 	seq_printf(m, "hardware watchpoint\t: %s\n",
 	              cpu_has_watch ? "yes" : "no");
+	seq_printf(m, "ASEs implemented\t:%s%s%s%s%s%s\n",
+		      cpu_has_mips16 ? " mips16" : "",
+		      cpu_has_mdmx ? " mdmx" : "",
+		      cpu_has_mips3d ? " mips3d" : "",
+		      cpu_has_smartmips ? " smartmips" : "",
+		      cpu_has_dsp ? " dsp" : "",
+		      cpu_has_mipsmt ? " mt" : ""
+		);
 
 	sprintf(fmt, "VCE%%c exceptions\t\t: %s\n",
 	        cpu_has_vce ? "%u" : "not available");
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index e4f2f8011387..4fe3d5715c41 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -25,8 +25,10 @@
 #include <linux/init.h>
 #include <linux/completion.h>
 
+#include <asm/abi.h>
 #include <asm/bootinfo.h>
 #include <asm/cpu.h>
+#include <asm/dsp.h>
 #include <asm/fpu.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -39,14 +41,6 @@
 #include <asm/inst.h>
 
 /*
- * We use this if we don't have any better idle routine..
- * (This to kill: kernel/platform.c.
- */
-void default_idle (void)
-{
-}
-
-/*
  * The idle thread. There's no useful work to be done, so just try to conserve
  * power and have a low exit latency (ie sit in a loop waiting for somebody to
  * say that they'd like to reschedule)
@@ -62,6 +56,54 @@ ATTRIB_NORET void cpu_idle(void)
 	}
 }
 
+extern int do_signal(sigset_t *oldset, struct pt_regs *regs);
+extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);
+
+/*
+ * Native o32 and N64 ABI without DSP ASE
+ */
+extern int setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
+        int signr, sigset_t *set);
+extern int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
+        int signr, sigset_t *set, siginfo_t *info);
+
+struct mips_abi mips_abi = {
+	.do_signal	= do_signal,
+#ifdef CONFIG_TRAD_SIGNALS
+	.setup_frame	= setup_frame,
+#endif
+	.setup_rt_frame	= setup_rt_frame
+};
+
+#ifdef CONFIG_MIPS32_O32
+/*
+ * o32 compatibility on 64-bit kernels, without DSP ASE
+ */
+extern int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
+        int signr, sigset_t *set);
+extern int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
+        int signr, sigset_t *set, siginfo_t *info);
+
+struct mips_abi mips_abi_32 = {
+	.do_signal	= do_signal32,
+	.setup_frame	= setup_frame_32,
+	.setup_rt_frame	= setup_rt_frame_32
+};
+#endif /* CONFIG_MIPS32_O32 */
+
+#ifdef CONFIG_MIPS32_N32
+/*
+ * N32 on 64-bit kernels, without DSP ASE
+ */
+extern int setup_rt_frame_n32(struct k_sigaction * ka, struct pt_regs *regs,
+        int signr, sigset_t *set, siginfo_t *info);
+
+struct mips_abi mips_abi_n32 = {
+	.do_signal	= do_signal,
+	.setup_rt_frame	= setup_rt_frame_n32
+};
+#endif /* CONFIG_MIPS32_N32 */
+
 asmlinkage void ret_from_fork(void);
 
 void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp)
@@ -78,6 +120,8 @@ void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp)
 	regs->cp0_status = status;
 	clear_used_math();
 	lose_fpu();
+	if (cpu_has_dsp)
+		__init_dsp();
 	regs->cp0_epc = pc;
 	regs->regs[29] = sp;
 	current_thread_info()->addr_limit = USER_DS;
@@ -97,14 +141,17 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	struct thread_info *ti = p->thread_info;
 	struct pt_regs *childregs;
 	long childksp;
+	p->set_child_tid = p->clear_child_tid = NULL;
 
 	childksp = (unsigned long)ti + THREAD_SIZE - 32;
 
 	preempt_disable();
 
-	if (is_fpu_owner()) {
+	if (is_fpu_owner())
 		save_fp(p);
-	}
+
+	if (cpu_has_dsp)
+		save_dsp(p);
 
 	preempt_enable();
 
@@ -142,6 +189,9 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	childregs->cp0_status &= ~(ST0_CU2|ST0_CU1);
 	clear_tsk_thread_flag(p, TIF_USEDFPU);
 
+	if (clone_flags & CLONE_SETTLS)
+		ti->tp_value = regs->regs[7];
+
 	return 0;
 }
 
@@ -175,6 +225,14 @@ void dump_regs(elf_greg_t *gp, struct pt_regs *regs)
 #endif
 }
 
+int dump_task_regs (struct task_struct *tsk, elf_gregset_t *regs)
+{
+	struct thread_info *ti = tsk->thread_info;
+	long ksp = (unsigned long)ti + THREAD_SIZE - 32;
+	dump_regs(&(*regs)[0], (struct pt_regs *) ksp - 1);
+	return 1;
+}
+
 int dump_task_fpu (struct task_struct *t, elf_fpregset_t *fpr)
 {
 	memcpy(fpr, &t->thread.fpu, sizeof(current->thread.fpu));
@@ -211,22 +269,48 @@ long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }
 
-struct mips_frame_info {
+static struct mips_frame_info {
+	void *func;
+	int omit_fp;	/* compiled without fno-omit-frame-pointer */
 	int frame_offset;
 	int pc_offset;
+} schedule_frame, mfinfo[] = {
+	{ schedule, 0 },	/* must be first */
+	/* arch/mips/kernel/semaphore.c */
+	{ __down, 1 },
+	{ __down_interruptible, 1 },
+	/* kernel/sched.c */
+#ifdef CONFIG_PREEMPT
+	{ preempt_schedule, 0 },
+#endif
+	{ wait_for_completion, 0 },
+	{ interruptible_sleep_on, 0 },
+	{ interruptible_sleep_on_timeout, 0 },
+	{ sleep_on, 0 },
+	{ sleep_on_timeout, 0 },
+	{ yield, 0 },
+	{ io_schedule, 0 },
+	{ io_schedule_timeout, 0 },
+#if defined(CONFIG_SMP) && defined(CONFIG_PREEMPT)
+	{ __preempt_spin_lock, 0 },
+	{ __preempt_write_lock, 0 },
+#endif
+	/* kernel/timer.c */
+	{ schedule_timeout, 1 },
+/*	{ nanosleep_restart, 1 }, */
+	/* lib/rwsem-spinlock.c */
+	{ __down_read, 1 },
+	{ __down_write, 1 },
 };
-static struct mips_frame_info schedule_frame;
-static struct mips_frame_info schedule_timeout_frame;
-static struct mips_frame_info sleep_on_frame;
-static struct mips_frame_info sleep_on_timeout_frame;
-static struct mips_frame_info wait_for_completion_frame;
+
 static int mips_frame_info_initialized;
-static int __init get_frame_info(struct mips_frame_info *info, void *func)
+static int __init get_frame_info(struct mips_frame_info *info)
 {
 	int i;
+	void *func = info->func;
 	union mips_instruction *ip = (union mips_instruction *)func;
 	info->pc_offset = -1;
-	info->frame_offset = -1;
+	info->frame_offset = info->omit_fp ? 0 : -1;
 	for (i = 0; i < 128; i++, ip++) {
 		/* if jal, jalr, jr, stop. */
 		if (ip->j_format.opcode == jal_op ||
@@ -247,14 +331,16 @@ static int __init get_frame_info(struct mips_frame_info *info, void *func)
 			/* sw / sd $ra, offset($sp) */
 			if (ip->i_format.rt == 31) {
 				if (info->pc_offset != -1)
-					break;
+					continue;
 				info->pc_offset =
 					ip->i_format.simmediate / sizeof(long);
 			}
 			/* sw / sd $s8, offset($sp) */
 			if (ip->i_format.rt == 30) {
+//#if 0	/* gcc 3.4 does aggressive optimization... */
 				if (info->frame_offset != -1)
-					break;
+					continue;
+//#endif
 				info->frame_offset =
 					ip->i_format.simmediate / sizeof(long);
 			}
@@ -272,13 +358,25 @@ static int __init get_frame_info(struct mips_frame_info *info, void *func)
 
 static int __init frame_info_init(void)
 {
-	mips_frame_info_initialized =
-		!get_frame_info(&schedule_frame, schedule) &&
-		!get_frame_info(&schedule_timeout_frame, schedule_timeout) &&
-		!get_frame_info(&sleep_on_frame, sleep_on) &&
-		!get_frame_info(&sleep_on_timeout_frame, sleep_on_timeout) &&
-		!get_frame_info(&wait_for_completion_frame, wait_for_completion);
-
+	int i, found;
+	for (i = 0; i < ARRAY_SIZE(mfinfo); i++)
+		if (get_frame_info(&mfinfo[i]))
+			return -1;
+	schedule_frame = mfinfo[0];
+	/* bubble sort */
+	do {
+		struct mips_frame_info tmp;
+		found = 0;
+		for (i = 1; i < ARRAY_SIZE(mfinfo); i++) {
+			if (mfinfo[i-1].func > mfinfo[i].func) {
+				tmp = mfinfo[i];
+				mfinfo[i] = mfinfo[i-1];
+				mfinfo[i-1] = tmp;
+				found = 1;
+			}
+		}
+	} while (found);
+	mips_frame_info_initialized = 1;
 	return 0;
 }
 
@@ -303,60 +401,39 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 /* get_wchan - a maintenance nightmare^W^Wpain in the ass ...  */
 unsigned long get_wchan(struct task_struct *p)
 {
+	unsigned long stack_page;
 	unsigned long frame, pc;
 
 	if (!p || p == current || p->state == TASK_RUNNING)
 		return 0;
 
-	if (!mips_frame_info_initialized)
+	stack_page = (unsigned long)p->thread_info;
+	if (!stack_page || !mips_frame_info_initialized)
 		return 0;
+
 	pc = thread_saved_pc(p);
 	if (!in_sched_functions(pc))
-		goto out;
-
-	if (pc >= (unsigned long) sleep_on_timeout)
-		goto schedule_timeout_caller;
-	if (pc >= (unsigned long) sleep_on)
-		goto schedule_caller;
-	if (pc >= (unsigned long) interruptible_sleep_on_timeout)
-		goto schedule_timeout_caller;
-	if (pc >= (unsigned long)interruptible_sleep_on)
-		goto schedule_caller;
-	if (pc >= (unsigned long)wait_for_completion)
-		goto schedule_caller;
-	goto schedule_timeout_caller;
-
-schedule_caller:
-	frame = ((unsigned long *)p->thread.reg30)[schedule_frame.frame_offset];
-	if (pc >= (unsigned long) sleep_on)
-		pc = ((unsigned long *)frame)[sleep_on_frame.pc_offset];
-	else
-		pc = ((unsigned long *)frame)[wait_for_completion_frame.pc_offset];
-	goto out;
+		return pc;
 
-schedule_timeout_caller:
-	/*
-	 * The schedule_timeout frame
-	 */
 	frame = ((unsigned long *)p->thread.reg30)[schedule_frame.frame_offset];
+	do {
+		int i;
 
-	/*
-	 * frame now points to sleep_on_timeout's frame
-	 */
-	pc    = ((unsigned long *)frame)[schedule_timeout_frame.pc_offset];
-
-	if (in_sched_functions(pc)) {
-		/* schedule_timeout called by [interruptible_]sleep_on_timeout */
-		frame = ((unsigned long *)frame)[schedule_timeout_frame.frame_offset];
-		pc    = ((unsigned long *)frame)[sleep_on_timeout_frame.pc_offset];
-	}
+		if (frame < stack_page || frame > stack_page + THREAD_SIZE - 32)
+			return 0;
 
-out:
+		for (i = ARRAY_SIZE(mfinfo) - 1; i >= 0; i--) {
+			if (pc >= (unsigned long) mfinfo[i].func)
+				break;
+		}
+		if (i < 0)
+			break;
 
-#ifdef CONFIG_64BIT
-	if (current->thread.mflags & MF_32BIT_REGS) /* Kludge for 32-bit ps  */
-		pc &= 0xffffffffUL;
-#endif
+		if (mfinfo[i].omit_fp)
+			break;
+		pc = ((unsigned long *)frame)[mfinfo[i].pc_offset];
+		frame = ((unsigned long *)frame)[mfinfo[i].frame_offset];
+	} while (in_sched_functions(pc));
 
 	return pc;
 }
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 0b571a5b4b83..f1b0f3e1f95b 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -28,14 +28,18 @@
 #include <linux/security.h>
 #include <linux/signal.h>
 
+#include <asm/byteorder.h>
 #include <asm/cpu.h>
+#include <asm/dsp.h>
 #include <asm/fpu.h>
 #include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/bootinfo.h>
+#include <asm/reg.h>
 
 /*
  * Called by kernel/ptrace.c when detaching..
@@ -47,7 +51,130 @@ void ptrace_disable(struct task_struct *child)
 	/* Nothing to do.. */
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+/*
+ * Read a general register set.  We always use the 64-bit format, even
+ * for 32-bit kernels and for 32-bit processes on a 64-bit kernel.
+ * Registers are sign extended to fill the available space.
+ */
+int ptrace_getregs (struct task_struct *child, __s64 __user *data)
+{
+	struct pt_regs *regs;
+	int i;
+
+	if (!access_ok(VERIFY_WRITE, data, 38 * 8))
+		return -EIO;
+
+	regs = (struct pt_regs *) ((unsigned long) child->thread_info +
+	       THREAD_SIZE - 32 - sizeof(struct pt_regs));
+
+	for (i = 0; i < 32; i++)
+		__put_user (regs->regs[i], data + i);
+	__put_user (regs->lo, data + EF_LO - EF_R0);
+	__put_user (regs->hi, data + EF_HI - EF_R0);
+	__put_user (regs->cp0_epc, data + EF_CP0_EPC - EF_R0);
+	__put_user (regs->cp0_badvaddr, data + EF_CP0_BADVADDR - EF_R0);
+	__put_user (regs->cp0_status, data + EF_CP0_STATUS - EF_R0);
+	__put_user (regs->cp0_cause, data + EF_CP0_CAUSE - EF_R0);
+
+	return 0;
+}
+
+/*
+ * Write a general register set.  As for PTRACE_GETREGS, we always use
+ * the 64-bit format.  On a 32-bit kernel only the lower order half
+ * (according to endianness) will be used.
+ */
+int ptrace_setregs (struct task_struct *child, __s64 __user *data)
+{
+	struct pt_regs *regs;
+	int i;
+
+	if (!access_ok(VERIFY_READ, data, 38 * 8))
+		return -EIO;
+
+	regs = (struct pt_regs *) ((unsigned long) child->thread_info +
+	       THREAD_SIZE - 32 - sizeof(struct pt_regs));
+
+	for (i = 0; i < 32; i++)
+		__get_user (regs->regs[i], data + i);
+	__get_user (regs->lo, data + EF_LO - EF_R0);
+	__get_user (regs->hi, data + EF_HI - EF_R0);
+	__get_user (regs->cp0_epc, data + EF_CP0_EPC - EF_R0);
+
+	/* badvaddr, status, and cause may not be written.  */
+
+	return 0;
+}
+
+int ptrace_getfpregs (struct task_struct *child, __u32 __user *data)
+{
+	int i;
+
+	if (!access_ok(VERIFY_WRITE, data, 33 * 8))
+		return -EIO;
+
+	if (tsk_used_math(child)) {
+		fpureg_t *fregs = get_fpu_regs(child);
+		for (i = 0; i < 32; i++)
+			__put_user (fregs[i], i + (__u64 __user *) data);
+	} else {
+		for (i = 0; i < 32; i++)
+			__put_user ((__u64) -1, i + (__u64 __user *) data);
+	}
+
+	if (cpu_has_fpu) {
+		unsigned int flags, tmp;
+
+		__put_user (child->thread.fpu.hard.fcr31, data + 64);
+
+		preempt_disable();
+		if (cpu_has_mipsmt) {
+			unsigned int vpflags = dvpe();
+			flags = read_c0_status();
+			__enable_fpu();
+			__asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp));
+			write_c0_status(flags);
+			evpe(vpflags);
+		} else {
+			flags = read_c0_status();
+			__enable_fpu();
+			__asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp));
+			write_c0_status(flags);
+		}
+		preempt_enable();
+		__put_user (tmp, data + 65);
+	} else {
+		__put_user (child->thread.fpu.soft.fcr31, data + 64);
+		__put_user ((__u32) 0, data + 65);
+	}
+
+	return 0;
+}
+
+int ptrace_setfpregs (struct task_struct *child, __u32 __user *data)
+{
+	fpureg_t *fregs;
+	int i;
+
+	if (!access_ok(VERIFY_READ, data, 33 * 8))
+		return -EIO;
+
+	fregs = get_fpu_regs(child);
+
+	for (i = 0; i < 32; i++)
+		__get_user (fregs[i], i + (__u64 __user *) data);
+
+	if (cpu_has_fpu)
+		__get_user (child->thread.fpu.hard.fcr31, data + 64);
+	else
+		__get_user (child->thread.fpu.soft.fcr31, data + 64);
+
+	/* FIR may not be written.  */
+
+	return 0;
+}
+
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
 {
 	struct task_struct *child;
 	int ret;
@@ -103,7 +230,7 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 		ret = -EIO;
 		if (copied != sizeof(tmp))
 			break;
-		ret = put_user(tmp,(unsigned long *) data);
+		ret = put_user(tmp,(unsigned long __user *) data);
 		break;
 	}
 
@@ -169,18 +296,53 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 			if (!cpu_has_fpu)
 				break;
 
-			flags = read_c0_status();
-			__enable_fpu();
-			__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
-			write_c0_status(flags);
+			preempt_disable();
+			if (cpu_has_mipsmt) {
+				unsigned int vpflags = dvpe();
+				flags = read_c0_status();
+				__enable_fpu();
+				__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
+				write_c0_status(flags);
+				evpe(vpflags);
+			} else {
+				flags = read_c0_status();
+				__enable_fpu();
+				__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
+				write_c0_status(flags);
+			}
+			preempt_enable();
+			break;
+		}
+		case DSP_BASE ... DSP_BASE + 5: {
+			dspreg_t *dregs;
+
+			if (!cpu_has_dsp) {
+				tmp = 0;
+				ret = -EIO;
+				goto out_tsk;
+			}
+			if (child->thread.dsp.used_dsp) {
+				dregs = __get_dsp_regs(child);
+				tmp = (unsigned long) (dregs[addr - DSP_BASE]);
+			} else {
+				tmp = -1;	/* DSP registers yet used  */
+			}
 			break;
 		}
+		case DSP_CONTROL:
+			if (!cpu_has_dsp) {
+				tmp = 0;
+				ret = -EIO;
+				goto out_tsk;
+			}
+			tmp = child->thread.dsp.dspcontrol;
+			break;
 		default:
 			tmp = 0;
 			ret = -EIO;
 			goto out_tsk;
 		}
-		ret = put_user(tmp, (unsigned long *) data);
+		ret = put_user(tmp, (unsigned long __user *) data);
 		break;
 	}
 
@@ -247,6 +409,25 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 			else
 				child->thread.fpu.soft.fcr31 = data;
 			break;
+		case DSP_BASE ... DSP_BASE + 5: {
+			dspreg_t *dregs;
+
+			if (!cpu_has_dsp) {
+				ret = -EIO;
+				break;
+			}
+
+			dregs = __get_dsp_regs(child);
+			dregs[addr - DSP_BASE] = data;
+			break;
+		}
+		case DSP_CONTROL:
+			if (!cpu_has_dsp) {
+				ret = -EIO;
+				break;
+			}
+			child->thread.dsp.dspcontrol = data;
+			break;
 		default:
 			/* The rest are not allowed. */
 			ret = -EIO;
@@ -255,6 +436,22 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 		break;
 		}
 
+	case PTRACE_GETREGS:
+		ret = ptrace_getregs (child, (__u64 __user *) data);
+		break;
+
+	case PTRACE_SETREGS:
+		ret = ptrace_setregs (child, (__u64 __user *) data);
+		break;
+
+	case PTRACE_GETFPREGS:
+		ret = ptrace_getfpregs (child, (__u32 __user *) data);
+		break;
+
+	case PTRACE_SETFPREGS:
+		ret = ptrace_setfpregs (child, (__u32 __user *) data);
+		break;
+
 	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
 	case PTRACE_CONT: { /* restart after signal. */
 		ret = -EIO;
@@ -289,6 +486,11 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 		ret = ptrace_detach(child, data);
 		break;
 
+	case PTRACE_GET_THREAD_AREA:
+		ret = put_user(child->thread_info->tp_value,
+				(unsigned long __user *) data);
+		break;
+
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
@@ -303,21 +505,14 @@ out:
 
 static inline int audit_arch(void)
 {
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#ifdef CONFIG_64BIT
-	if (!(current->thread.mflags & MF_32BIT_REGS))
-		return AUDIT_ARCH_MIPSEL64;
-#endif /* MIPS64 */
-	return AUDIT_ARCH_MIPSEL;
-
-#else /* big endian... */
+	int arch = EM_MIPS;
 #ifdef CONFIG_64BIT
-	if (!(current->thread.mflags & MF_32BIT_REGS))
-		return AUDIT_ARCH_MIPS64;
-#endif /* MIPS64 */
-	return AUDIT_ARCH_MIPS;
-
-#endif /* endian */
+	arch |=  __AUDIT_ARCH_64BIT;
+#endif
+#if defined(__LITTLE_ENDIAN)
+	arch |=  __AUDIT_ARCH_LE;
+#endif
+	return arch;
 }
 
 /*
@@ -327,12 +522,13 @@ static inline int audit_arch(void)
 asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
 {
 	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(current, AUDITSC_RESULT(regs->regs[2]), regs->regs[2]);
+		audit_syscall_exit(current, AUDITSC_RESULT(regs->regs[2]),
+		                   regs->regs[2]);
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		goto out;
 	if (!(current->ptrace & PT_PTRACED))
 		goto out;
+	if (!test_thread_flag(TIF_SYSCALL_TRACE))
+		goto out;
 
 	/* The 0x80 provides a way for the tracing parent to distinguish
 	   between a syscall stop and SIGTRAP delivery */
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index eee207969c21..9a9b04972132 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -24,17 +24,24 @@
 #include <linux/smp_lock.h>
 #include <linux/user.h>
 #include <linux/security.h>
-#include <linux/signal.h>
 
 #include <asm/cpu.h>
+#include <asm/dsp.h>
 #include <asm/fpu.h>
 #include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/bootinfo.h>
 
+int ptrace_getregs (struct task_struct *child, __s64 __user *data);
+int ptrace_setregs (struct task_struct *child, __s64 __user *data);
+
+int ptrace_getfpregs (struct task_struct *child, __u32 __user *data);
+int ptrace_setfpregs (struct task_struct *child, __u32 __user *data);
+
 /*
  * Tracing a 32-bit process with a 64-bit strace and vice versa will not
  * work.  I don't know how to fix this.
@@ -99,6 +106,35 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 		break;
 	}
 
+	/*
+	 * Read 4 bytes of the other process' storage
+	 *  data is a pointer specifying where the user wants the
+	 *	4 bytes copied into
+	 *  addr is a pointer in the user's storage that contains an 8 byte
+	 *	address in the other process of the 4 bytes that is to be read
+	 * (this is run in a 32-bit process looking at a 64-bit process)
+	 * when I and D space are separate, these will need to be fixed.
+	 */
+	case PTRACE_PEEKTEXT_3264:
+	case PTRACE_PEEKDATA_3264: {
+		u32 tmp;
+		int copied;
+		u32 __user * addrOthers;
+
+		ret = -EIO;
+
+		/* Get the addr in the other process that we want to read */
+		if (get_user(addrOthers, (u32 __user * __user *) (unsigned long) addr) != 0)
+			break;
+
+		copied = access_process_vm(child, (u64)addrOthers, &tmp,
+				sizeof(tmp), 0);
+		if (copied != sizeof(tmp))
+			break;
+		ret = put_user(tmp, (u32 __user *) (unsigned long) data);
+		break;
+	}
+
 	/* Read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR: {
 		struct pt_regs *regs;
@@ -156,12 +192,44 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 			if (!cpu_has_fpu)
 				break;
 
-			flags = read_c0_status();
-			__enable_fpu();
-			__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
-			write_c0_status(flags);
+			preempt_disable();
+			if (cpu_has_mipsmt) {
+				unsigned int vpflags = dvpe();
+				flags = read_c0_status();
+				__enable_fpu();
+				__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
+				write_c0_status(flags);
+				evpe(vpflags);
+			} else {
+				flags = read_c0_status();
+				__enable_fpu();
+				__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
+				write_c0_status(flags);
+			}
+			preempt_enable();
 			break;
 		}
+		case DSP_BASE ... DSP_BASE + 5:
+			if (!cpu_has_dsp) {
+				tmp = 0;
+				ret = -EIO;
+				goto out_tsk;
+			}
+			if (child->thread.dsp.used_dsp) {
+				dspreg_t *dregs = __get_dsp_regs(child);
+				tmp = (unsigned long) (dregs[addr - DSP_BASE]);
+			} else {
+				tmp = -1;	/* DSP registers yet used  */
+			}
+			break;
+		case DSP_CONTROL:
+			if (!cpu_has_dsp) {
+				tmp = 0;
+				ret = -EIO;
+				goto out_tsk;
+			}
+			tmp = child->thread.dsp.dspcontrol;
+			break;
 		default:
 			tmp = 0;
 			ret = -EIO;
@@ -181,6 +249,31 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 		ret = -EIO;
 		break;
 
+	/*
+	 * Write 4 bytes into the other process' storage
+	 *  data is the 4 bytes that the user wants written
+	 *  addr is a pointer in the user's storage that contains an
+	 *	8 byte address in the other process where the 4 bytes
+	 *	that is to be written
+	 * (this is run in a 32-bit process looking at a 64-bit process)
+	 * when I and D space are separate, these will need to be fixed.
+	 */
+	case PTRACE_POKETEXT_3264:
+	case PTRACE_POKEDATA_3264: {
+		u32 __user * addrOthers;
+
+		/* Get the addr in the other process that we want to write into */
+		ret = -EIO;
+		if (get_user(addrOthers, (u32 __user * __user *) (unsigned long) addr) != 0)
+			break;
+		ret = 0;
+		if (access_process_vm(child, (u64)addrOthers, &data,
+					sizeof(data), 1) == sizeof(data))
+			break;
+		ret = -EIO;
+		break;
+	}
+
 	case PTRACE_POKEUSR: {
 		struct pt_regs *regs;
 		ret = 0;
@@ -231,6 +324,22 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 			else
 				child->thread.fpu.soft.fcr31 = data;
 			break;
+		case DSP_BASE ... DSP_BASE + 5:
+			if (!cpu_has_dsp) {
+				ret = -EIO;
+				break;
+			}
+
+			dspreg_t *dregs = __get_dsp_regs(child);
+			dregs[addr - DSP_BASE] = data;
+			break;
+		case DSP_CONTROL:
+			if (!cpu_has_dsp) {
+				ret = -EIO;
+				break;
+			}
+			child->thread.dsp.dspcontrol = data;
+			break;
 		default:
 			/* The rest are not allowed. */
 			ret = -EIO;
@@ -239,6 +348,22 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 		break;
 		}
 
+	case PTRACE_GETREGS:
+		ret = ptrace_getregs (child, (__u64 __user *) (__u64) data);
+		break;
+
+	case PTRACE_SETREGS:
+		ret = ptrace_setregs (child, (__u64 __user *) (__u64) data);
+		break;
+
+	case PTRACE_GETFPREGS:
+		ret = ptrace_getfpregs (child, (__u32 __user *) (__u64) data);
+		break;
+
+	case PTRACE_SETFPREGS:
+		ret = ptrace_setfpregs (child, (__u32 __user *) (__u64) data);
+		break;
+
 	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
 	case PTRACE_CONT: { /* restart after signal. */
 		ret = -EIO;
@@ -269,10 +394,25 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 		wake_up_process(child);
 		break;
 
+	case PTRACE_GET_THREAD_AREA:
+		ret = put_user(child->thread_info->tp_value,
+				(unsigned int __user *) (unsigned long) data);
+		break;
+
 	case PTRACE_DETACH: /* detach a process that was attached. */
 		ret = ptrace_detach(child, data);
 		break;
 
+	case PTRACE_GETEVENTMSG:
+		ret = put_user(child->ptrace_message,
+			       (unsigned int __user *) (unsigned long) data);
+		break;
+
+	case PTRACE_GET_THREAD_AREA_3264:
+		ret = put_user(child->thread_info->tp_value,
+				(unsigned long __user *) (unsigned long) data);
+		break;
+
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S
index 1a14c6b18829..283a98508fc8 100644
--- a/arch/mips/kernel/r4k_fpu.S
+++ b/arch/mips/kernel/r4k_fpu.S
@@ -32,7 +32,7 @@
 
 	.set	noreorder
 	.set	mips3
-	/* Save floating point context */
+
 LEAF(_save_fp_context)
 	cfc1	t1, fcr31
 
@@ -74,9 +74,6 @@ LEAF(_save_fp_context)
 	EX	sdc1 $f28, SC_FPREGS+224(a0)
 	EX	sdc1 $f30, SC_FPREGS+240(a0)
 	EX	sw t1, SC_FPC_CSR(a0)
-	cfc1	t0, $0				# implementation/version
-	EX	sw t0, SC_FPC_EIR(a0)
-
 	jr	ra
 	 li	v0, 0					# success
 	END(_save_fp_context)
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
new file mode 100644
index 000000000000..8c81f3cb4e2d
--- /dev/null
+++ b/arch/mips/kernel/rtlx.c
@@ -0,0 +1,341 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/vmalloc.h>
+#include <linux/elf.h>
+#include <linux/seq_file.h>
+#include <linux/syscalls.h>
+#include <linux/moduleloader.h>
+#include <linux/interrupt.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <asm/mipsmtregs.h>
+#include <asm/cacheflush.h>
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/rtlx.h>
+
+#define RTLX_MAJOR 64
+#define RTLX_TARG_VPE 1
+
+struct rtlx_info *rtlx;
+static int major;
+static char module_name[] = "rtlx";
+static inline int spacefree(int read, int write, int size);
+
+static struct chan_waitqueues {
+	wait_queue_head_t rt_queue;
+	wait_queue_head_t lx_queue;
+} channel_wqs[RTLX_CHANNELS];
+
+static struct irqaction irq;
+static int irq_num;
+
+extern void *vpe_get_shared(int index);
+
+static void rtlx_dispatch(struct pt_regs *regs)
+{
+	do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ, regs);
+}
+
+irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	irqreturn_t r = IRQ_HANDLED;
+	int i;
+
+	for (i = 0; i < RTLX_CHANNELS; i++) {
+		struct rtlx_channel *chan = &rtlx->channel[i];
+
+		if (chan->lx_read != chan->lx_write)
+			wake_up_interruptible(&channel_wqs[i].lx_queue);
+	}
+
+	return r;
+}
+
+void dump_rtlx(void)
+{
+	int i;
+
+	printk("id 0x%lx state %d\n", rtlx->id, rtlx->state);
+
+	for (i = 0; i < RTLX_CHANNELS; i++) {
+		struct rtlx_channel *chan = &rtlx->channel[i];
+
+		printk(" rt_state %d lx_state %d buffer_size %d\n",
+		       chan->rt_state, chan->lx_state, chan->buffer_size);
+
+		printk(" rt_read %d rt_write %d\n",
+		       chan->rt_read, chan->rt_write);
+
+		printk(" lx_read %d lx_write %d\n",
+		       chan->lx_read, chan->lx_write);
+
+		printk(" rt_buffer <%s>\n", chan->rt_buffer);
+		printk(" lx_buffer <%s>\n", chan->lx_buffer);
+	}
+}
+
+/* call when we have the address of the shared structure from the SP side. */
+static int rtlx_init(struct rtlx_info *rtlxi)
+{
+	int i;
+
+	if (rtlxi->id != RTLX_ID) {
+		printk(KERN_WARNING "no valid RTLX id at 0x%p\n", rtlxi);
+		return (-ENOEXEC);
+	}
+
+	/* initialise the wait queues */
+	for (i = 0; i < RTLX_CHANNELS; i++) {
+		init_waitqueue_head(&channel_wqs[i].rt_queue);
+		init_waitqueue_head(&channel_wqs[i].lx_queue);
+	}
+
+	/* set up for interrupt handling */
+	memset(&irq, 0, sizeof(struct irqaction));
+
+	if (cpu_has_vint) {
+		set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch);
+	}
+
+	irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ;
+	irq.handler = rtlx_interrupt;
+	irq.flags = SA_INTERRUPT;
+	irq.name = "RTLX";
+	irq.dev_id = rtlx;
+	setup_irq(irq_num, &irq);
+
+	rtlx = rtlxi;
+	return (0);
+}
+
+/* only allow one open process at a time to open each channel */
+static int rtlx_open(struct inode *inode, struct file *filp)
+{
+	int minor, ret;
+	struct rtlx_channel *chan;
+
+	/* assume only 1 device at the mo. */
+	minor = MINOR(inode->i_rdev);
+
+	if (rtlx == NULL) {
+		struct rtlx_info **p;
+		if( (p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) {
+			printk(" vpe_get_shared is NULL. Has an SP program been loaded?\n");
+			return (-EFAULT);
+		}
+
+		if (*p == NULL) {
+			printk(" vpe_shared %p %p\n", p, *p);
+			return (-EFAULT);
+		}
+
+		if ((ret = rtlx_init(*p)) < 0)
+			return (ret);
+	}
+
+	chan = &rtlx->channel[minor];
+
+	/* already open? */
+	if (chan->lx_state == RTLX_STATE_OPENED)
+		return (-EBUSY);
+
+	chan->lx_state = RTLX_STATE_OPENED;
+	return (0);
+}
+
+static int rtlx_release(struct inode *inode, struct file *filp)
+{
+	int minor;
+
+	minor = MINOR(inode->i_rdev);
+	rtlx->channel[minor].lx_state = RTLX_STATE_UNUSED;
+	return (0);
+}
+
+static unsigned int rtlx_poll(struct file *file, poll_table * wait)
+{
+	int minor;
+	unsigned int mask = 0;
+	struct rtlx_channel *chan;
+
+	minor = MINOR(file->f_dentry->d_inode->i_rdev);
+	chan = &rtlx->channel[minor];
+
+	poll_wait(file, &channel_wqs[minor].rt_queue, wait);
+	poll_wait(file, &channel_wqs[minor].lx_queue, wait);
+
+	/* data available to read? */
+	if (chan->lx_read != chan->lx_write)
+		mask |= POLLIN | POLLRDNORM;
+
+	/* space to write */
+	if (spacefree(chan->rt_read, chan->rt_write, chan->buffer_size))
+		mask |= POLLOUT | POLLWRNORM;
+
+	return (mask);
+}
+
+static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count,
+			 loff_t * ppos)
+{
+	size_t fl = 0L;
+	int minor;
+	struct rtlx_channel *lx;
+	DECLARE_WAITQUEUE(wait, current);
+
+	minor = MINOR(file->f_dentry->d_inode->i_rdev);
+	lx = &rtlx->channel[minor];
+
+	/* data available? */
+	if (lx->lx_write == lx->lx_read) {
+		if (file->f_flags & O_NONBLOCK)
+			return (0);	// -EAGAIN makes cat whinge
+
+		/* go to sleep */
+		add_wait_queue(&channel_wqs[minor].lx_queue, &wait);
+		set_current_state(TASK_INTERRUPTIBLE);
+
+		while (lx->lx_write == lx->lx_read)
+			schedule();
+
+		set_current_state(TASK_RUNNING);
+		remove_wait_queue(&channel_wqs[minor].lx_queue, &wait);
+
+		/* back running */
+	}
+
+	/* find out how much in total */
+	count = min( count,
+		     (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) % lx->buffer_size);
+
+	/* then how much from the read pointer onwards */
+	fl = min( count, (size_t)lx->buffer_size - lx->lx_read);
+
+	copy_to_user (buffer, &lx->lx_buffer[lx->lx_read], fl);
+
+	/* and if there is anything left at the beginning of the buffer */
+	if ( count - fl )
+		copy_to_user (buffer + fl, lx->lx_buffer, count - fl);
+
+	/* update the index */
+	lx->lx_read += count;
+	lx->lx_read %= lx->buffer_size;
+
+	return (count);
+}
+
+static inline int spacefree(int read, int write, int size)
+{
+	if (read == write) {
+		/* never fill the buffer completely, so indexes are always equal if empty
+		   and only empty, or !equal if data available */
+		return (size - 1);
+	}
+
+	return ((read + size - write) % size) - 1;
+}
+
+static ssize_t rtlx_write(struct file *file, const char __user * buffer,
+			  size_t count, loff_t * ppos)
+{
+	int minor;
+	struct rtlx_channel *rt;
+	size_t fl;
+	DECLARE_WAITQUEUE(wait, current);
+
+	minor = MINOR(file->f_dentry->d_inode->i_rdev);
+	rt = &rtlx->channel[minor];
+
+	/* any space left... */
+	if (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size)) {
+
+		if (file->f_flags & O_NONBLOCK)
+			return (-EAGAIN);
+
+		add_wait_queue(&channel_wqs[minor].rt_queue, &wait);
+		set_current_state(TASK_INTERRUPTIBLE);
+
+		while (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size))
+			schedule();
+
+		set_current_state(TASK_RUNNING);
+		remove_wait_queue(&channel_wqs[minor].rt_queue, &wait);
+	}
+
+	/* total number of bytes to copy */
+	count = min( count, (size_t)spacefree(rt->rt_read, rt->rt_write, rt->buffer_size) );
+
+	/* first bit from write pointer to the end of the buffer, or count */
+	fl = min(count, (size_t) rt->buffer_size - rt->rt_write);
+
+	copy_from_user(&rt->rt_buffer[rt->rt_write], buffer, fl);
+
+	/* if there's any left copy to the beginning of the buffer */
+	if( count - fl )
+		copy_from_user(rt->rt_buffer, buffer + fl, count - fl);
+
+	rt->rt_write += count;
+	rt->rt_write %= rt->buffer_size;
+
+	return(count);
+}
+
+static struct file_operations rtlx_fops = {
+	.owner = THIS_MODULE,
+	.open = rtlx_open,
+	.release = rtlx_release,
+	.write = rtlx_write,
+	.read = rtlx_read,
+	.poll = rtlx_poll
+};
+
+static int rtlx_module_init(void)
+{
+	if ((major = register_chrdev(RTLX_MAJOR, module_name, &rtlx_fops)) < 0) {
+		printk("rtlx_module_init: unable to register device\n");
+		return (-EBUSY);
+	}
+
+	if (major == 0)
+		major = RTLX_MAJOR;
+
+	return (0);
+}
+
+static void rtlx_module_exit(void)
+{
+	unregister_chrdev(major, module_name);
+}
+
+module_init(rtlx_module_init);
+module_exit(rtlx_module_exit);
+MODULE_DESCRIPTION("MIPS RTLX");
+MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 17b5030fb6ea..4dd8e8b4fbc2 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -578,7 +578,7 @@ einval:	li	v0, -EINVAL
 	sys	sys_fremovexattr	2	/* 4235 */
 	sys	sys_tkill		2
 	sys	sys_sendfile64		5
-	sys	sys_futex		2
+	sys	sys_futex		6
 	sys	sys_sched_setaffinity	3
 	sys	sys_sched_getaffinity	3	/* 4240 */
 	sys	sys_io_setup		2
@@ -587,7 +587,7 @@ einval:	li	v0, -EINVAL
 	sys	sys_io_submit		3
 	sys	sys_io_cancel		3	/* 4245 */
 	sys	sys_exit_group		1
-	sys	sys_lookup_dcookie	3
+	sys	sys_lookup_dcookie	4
 	sys	sys_epoll_create	1
 	sys	sys_epoll_ctl		4
 	sys	sys_epoll_wait		3	/* 4250 */
@@ -618,12 +618,15 @@ einval:	li	v0, -EINVAL
 	sys	sys_mq_notify		2	/* 4275 */
 	sys	sys_mq_getsetattr	3
 	sys	sys_ni_syscall		0	/* sys_vserver */
-	sys	sys_waitid		4
+	sys	sys_waitid		5
 	sys	sys_ni_syscall		0	/* available, was setaltroot */
-	sys	sys_add_key		5
+	sys	sys_add_key		5	/* 4280 */
 	sys	sys_request_key		4
 	sys	sys_keyctl		5
-
+	sys	sys_set_thread_area	1
+	sys	sys_inotify_init	0
+	sys	sys_inotify_add_watch	3	/* 4285 */
+	sys	sys_inotify_rm_watch	2
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index ffb22a2068bf..9085838d6ce3 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -449,3 +449,7 @@ sys_call_table:
 	PTR	sys_add_key
 	PTR	sys_request_key			/* 5240 */
 	PTR	sys_keyctl
+	PTR	sys_set_thread_area
+	PTR	sys_inotify_init
+	PTR	sys_inotify_add_watch
+	PTR	sys_inotify_rm_watch		/* 5245 */
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index e52049c87bc3..7e66eb823bf6 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -176,7 +176,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_fork
 	PTR	sys32_execve
 	PTR	sys_exit
-	PTR	sys32_wait4
+	PTR	compat_sys_wait4
 	PTR	sys_kill			/* 6060 */
 	PTR	sys32_newuname
 	PTR	sys_semget
@@ -216,7 +216,7 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_getrusage
 	PTR	sys32_sysinfo
 	PTR	compat_sys_times
-	PTR	sys_ptrace
+	PTR	sys32_ptrace
 	PTR	sys_getuid			/* 6100 */
 	PTR	sys_syslog
 	PTR	sys_getgid
@@ -243,14 +243,14 @@ EXPORT(sysn32_call_table)
 	PTR	sys_capget
 	PTR	sys_capset
 	PTR	sys32_rt_sigpending		/* 6125 */
-	PTR	compat_sys_rt_sigtimedwait
-	PTR	sys32_rt_sigqueueinfo
+	PTR	sysn32_rt_sigtimedwait
+	PTR	sys_rt_sigqueueinfo
 	PTR	sys32_rt_sigsuspend
 	PTR	sys32_sigaltstack
 	PTR	compat_sys_utime		/* 6130 */
 	PTR	sys_mknod
 	PTR	sys32_personality
-	PTR	sys_ustat
+	PTR	sys32_ustat
 	PTR	compat_sys_statfs
 	PTR	compat_sys_fstatfs		/* 6135 */
 	PTR	sys_sysfs
@@ -329,7 +329,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_epoll_wait
 	PTR	sys_remap_file_pages		/* 6210 */
 	PTR	sysn32_rt_sigreturn
-	PTR	sys_fcntl
+	PTR	compat_sys_fcntl64
 	PTR	sys_set_tid_address
 	PTR	sys_restart_syscall
 	PTR	sys_semtimedop			/* 6215 */
@@ -337,15 +337,15 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_statfs64
 	PTR	compat_sys_fstatfs64
 	PTR	sys_sendfile64
-	PTR	sys_timer_create		/* 6220 */
-	PTR	sys_timer_settime
-	PTR	sys_timer_gettime
+	PTR	sys32_timer_create		/* 6220 */
+	PTR	compat_sys_timer_settime
+	PTR	compat_sys_timer_gettime
 	PTR	sys_timer_getoverrun
 	PTR	sys_timer_delete
-	PTR	sys_clock_settime		/* 6225 */
-	PTR	sys_clock_gettime
-	PTR	sys_clock_getres
-	PTR	sys_clock_nanosleep
+	PTR	compat_sys_clock_settime		/* 6225 */
+	PTR	compat_sys_clock_gettime
+	PTR	compat_sys_clock_getres
+	PTR	compat_sys_clock_nanosleep
 	PTR	sys_tgkill
 	PTR	compat_sys_utimes		/* 6230 */
 	PTR	sys_ni_syscall			/* sys_mbind */
@@ -358,8 +358,12 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_mq_notify
 	PTR	compat_sys_mq_getsetattr
 	PTR	sys_ni_syscall			/* 6240, sys_vserver */
-	PTR	sys_waitid
+	PTR	sysn32_waitid
 	PTR	sys_ni_syscall			/* available, was setaltroot */
 	PTR	sys_add_key
 	PTR	sys_request_key
 	PTR	sys_keyctl			/* 6245 */
+	PTR	sys_set_thread_area
+	PTR	sys_inotify_init
+	PTR	sys_inotify_add_watch
+	PTR	sys_inotify_rm_watch
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 739f3998d76b..5a16401e443a 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -316,13 +316,13 @@ sys_call_table:
 	PTR	sys_vhangup
 	PTR	sys_ni_syscall			/* was sys_idle	 */
 	PTR	sys_ni_syscall			/* sys_vm86 */
-	PTR	sys32_wait4
+	PTR	compat_sys_wait4
 	PTR	sys_swapoff			/* 4115 */
 	PTR	sys32_sysinfo
 	PTR	sys32_ipc
 	PTR	sys_fsync
 	PTR	sys32_sigreturn
-	PTR	sys_clone			/* 4120 */
+	PTR	sys32_clone			/* 4120 */
 	PTR	sys_setdomainname
 	PTR	sys32_newuname
 	PTR	sys_ni_syscall			/* sys_modify_ldt */
@@ -391,7 +391,7 @@ sys_call_table:
 	PTR	sys_getresuid
 	PTR	sys_ni_syscall			/* was query_module */
 	PTR	sys_poll
-	PTR	sys_nfsservctl
+	PTR	compat_sys_nfsservctl
 	PTR	sys_setresgid			/* 4190 */
 	PTR	sys_getresgid
 	PTR	sys_prctl
@@ -459,7 +459,7 @@ sys_call_table:
 	PTR	sys_fadvise64_64
 	PTR	compat_sys_statfs64		/* 4255 */
 	PTR	compat_sys_fstatfs64
-	PTR	sys_timer_create
+	PTR	sys32_timer_create
 	PTR	compat_sys_timer_settime
 	PTR	compat_sys_timer_gettime
 	PTR	sys_timer_getoverrun		/* 4260 */
@@ -480,9 +480,13 @@ sys_call_table:
 	PTR	compat_sys_mq_notify		/* 4275 */
 	PTR	compat_sys_mq_getsetattr
 	PTR	sys_ni_syscall			/* sys_vserver */
-	PTR	sys_waitid
+	PTR	sys32_waitid
 	PTR	sys_ni_syscall			/* available, was setaltroot */
 	PTR	sys_add_key			/* 4280 */
 	PTR	sys_request_key
 	PTR	sys_keyctl
+	PTR	sys_set_thread_area
+	PTR	sys_inotify_init
+	PTR	sys_inotify_add_watch		/* 4285 */
+	PTR	sys_inotify_rm_watch
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/semaphore.c b/arch/mips/kernel/semaphore.c
index 9c40fe5a8e8d..1265358cdca1 100644
--- a/arch/mips/kernel/semaphore.c
+++ b/arch/mips/kernel/semaphore.c
@@ -42,24 +42,28 @@ static inline int __sem_update_count(struct semaphore *sem, int incr)
 
 	if (cpu_has_llsc && R10000_LLSC_WAR) {
 		__asm__ __volatile__(
-		"1:	ll	%0, %2					\n"
+		"	.set	mips3					\n"
+		"1:	ll	%0, %2		# __sem_update_count	\n"
 		"	sra	%1, %0, 31				\n"
 		"	not	%1					\n"
 		"	and	%1, %0, %1				\n"
-		"	add	%1, %1, %3				\n"
+		"	addu	%1, %1, %3				\n"
 		"	sc	%1, %2					\n"
 		"	beqzl	%1, 1b					\n"
+		"	.set	mips0					\n"
 		: "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
 		: "r" (incr), "m" (sem->count));
 	} else if (cpu_has_llsc) {
 		__asm__ __volatile__(
-		"1:	ll	%0, %2					\n"
+		"	.set	mips3					\n"
+		"1:	ll	%0, %2		# __sem_update_count	\n"
 		"	sra	%1, %0, 31				\n"
 		"	not	%1					\n"
 		"	and	%1, %0, %1				\n"
-		"	add	%1, %1, %3				\n"
+		"	addu	%1, %1, %3				\n"
 		"	sc	%1, %2					\n"
 		"	beqz	%1, 1b					\n"
+		"	.set	mips0					\n"
 		: "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
 		: "r" (incr), "m" (sem->count));
 	} else {
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 12b531c295c4..d86affa21278 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -37,12 +37,13 @@
 
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
+#include <asm/cache.h>
 #include <asm/cpu.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/system.h>
 
-struct cpuinfo_mips cpu_data[NR_CPUS];
+struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly;
 
 EXPORT_SYMBOL(cpu_data);
 
@@ -62,8 +63,8 @@ EXPORT_SYMBOL(PCI_DMA_BUS_IS_PHYS);
  *
  * These are initialized so they are in the .data section
  */
-unsigned long mips_machtype = MACH_UNKNOWN;
-unsigned long mips_machgroup = MACH_GROUP_UNKNOWN;
+unsigned long mips_machtype __read_mostly = MACH_UNKNOWN;
+unsigned long mips_machgroup __read_mostly = MACH_GROUP_UNKNOWN;
 
 EXPORT_SYMBOL(mips_machtype);
 EXPORT_SYMBOL(mips_machgroup);
@@ -77,7 +78,7 @@ static char command_line[CL_SIZE];
  * mips_io_port_base is the begin of the address space to which x86 style
  * I/O ports are mapped.
  */
-const unsigned long mips_io_port_base = -1;
+const unsigned long mips_io_port_base __read_mostly = -1;
 EXPORT_SYMBOL(mips_io_port_base);
 
 /*
@@ -510,31 +511,7 @@ static inline void resource_init(void)
 #undef MAXMEM
 #undef MAXMEM_PFN
 
-static int __initdata earlyinit_debug;
-
-static int __init earlyinit_debug_setup(char *str)
-{
-	earlyinit_debug = 1;
-	return 1;
-}
-__setup("earlyinit_debug", earlyinit_debug_setup);
-
-extern initcall_t __earlyinitcall_start, __earlyinitcall_end;
-
-static void __init do_earlyinitcalls(void)
-{
-	initcall_t *call, *start, *end;
-
-	start = &__earlyinitcall_start;
-	end = &__earlyinitcall_end;
-
-	for (call = start; call < end; call++) {
-		if (earlyinit_debug)
-			printk("calling earlyinitcall 0x%p\n", *call);
-
-		(*call)();
-	}
-}
+extern void plat_setup(void);
 
 void __init setup_arch(char **cmdline_p)
 {
@@ -551,7 +528,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 	/* call board setup routine */
-	do_earlyinitcalls();
+	plat_setup();
 
 	strlcpy(command_line, arcs_cmdline, sizeof(command_line));
 	strlcpy(saved_command_line, command_line, COMMAND_LINE_SIZE);
@@ -573,3 +550,12 @@ int __init fpu_disable(char *s)
 }
 
 __setup("nofpu", fpu_disable);
+
+int __init dsp_disable(char *s)
+{
+	cpu_data[0].ases &= ~MIPS_ASE_DSP;
+
+	return 1;
+}
+
+__setup("nodsp", dsp_disable);
diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h
index f9234df53253..0f66ae5838b9 100644
--- a/arch/mips/kernel/signal-common.h
+++ b/arch/mips/kernel/signal-common.h
@@ -8,13 +8,14 @@
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  */
 
+#include <linux/config.h>
+
 static inline int
 setup_sigcontext(struct pt_regs *regs, struct sigcontext *sc)
 {
 	int err = 0;
 
 	err |= __put_user(regs->cp0_epc, &sc->sc_pc);
-	err |= __put_user(regs->cp0_status, &sc->sc_status);
 
 #define save_gp_reg(i) do {						\
 	err |= __put_user(regs->regs[i], &sc->sc_regs[i]);		\
@@ -30,10 +31,32 @@ setup_sigcontext(struct pt_regs *regs, struct sigcontext *sc)
 	save_gp_reg(31);
 #undef save_gp_reg
 
+#ifdef CONFIG_32BIT
 	err |= __put_user(regs->hi, &sc->sc_mdhi);
 	err |= __put_user(regs->lo, &sc->sc_mdlo);
-	err |= __put_user(regs->cp0_cause, &sc->sc_cause);
-	err |= __put_user(regs->cp0_badvaddr, &sc->sc_badvaddr);
+	if (cpu_has_dsp) {
+		err |= __put_user(mfhi1(), &sc->sc_hi1);
+		err |= __put_user(mflo1(), &sc->sc_lo1);
+		err |= __put_user(mfhi2(), &sc->sc_hi2);
+		err |= __put_user(mflo2(), &sc->sc_lo2);
+		err |= __put_user(mfhi3(), &sc->sc_hi3);
+		err |= __put_user(mflo3(), &sc->sc_lo3);
+		err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
+	}
+#endif
+#ifdef CONFIG_64BIT
+	err |= __put_user(regs->hi, &sc->sc_hi[0]);
+	err |= __put_user(regs->lo, &sc->sc_lo[0]);
+	if (cpu_has_dsp) {
+		err |= __put_user(mfhi1(), &sc->sc_hi[1]);
+		err |= __put_user(mflo1(), &sc->sc_lo[1]);
+		err |= __put_user(mfhi2(), &sc->sc_hi[2]);
+		err |= __put_user(mflo2(), &sc->sc_lo[2]);
+		err |= __put_user(mfhi3(), &sc->sc_hi[3]);
+		err |= __put_user(mflo3(), &sc->sc_lo[3]);
+		err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
+	}
+#endif
 
 	err |= __put_user(!!used_math(), &sc->sc_used_math);
 
@@ -61,15 +84,40 @@ out:
 static inline int
 restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc)
 {
-	int err = 0;
 	unsigned int used_math;
+	unsigned long treg;
+	int err = 0;
 
 	/* Always make any pending restarted system calls return -EINTR */
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
 	err |= __get_user(regs->cp0_epc, &sc->sc_pc);
+#ifdef CONFIG_32BIT
 	err |= __get_user(regs->hi, &sc->sc_mdhi);
 	err |= __get_user(regs->lo, &sc->sc_mdlo);
+	if (cpu_has_dsp) {
+		err |= __get_user(treg, &sc->sc_hi1); mthi1(treg);
+		err |= __get_user(treg, &sc->sc_lo1); mtlo1(treg);
+		err |= __get_user(treg, &sc->sc_hi2); mthi2(treg);
+		err |= __get_user(treg, &sc->sc_lo2); mtlo2(treg);
+		err |= __get_user(treg, &sc->sc_hi3); mthi3(treg);
+		err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
+		err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
+	}
+#endif
+#ifdef CONFIG_64BIT
+	err |= __get_user(regs->hi, &sc->sc_hi[0]);
+	err |= __get_user(regs->lo, &sc->sc_lo[0]);
+	if (cpu_has_dsp) {
+		err |= __get_user(treg, &sc->sc_hi[1]); mthi1(treg);
+		err |= __get_user(treg, &sc->sc_lo[1]); mthi1(treg);
+		err |= __get_user(treg, &sc->sc_hi[2]); mthi2(treg);
+		err |= __get_user(treg, &sc->sc_lo[2]); mthi2(treg);
+		err |= __get_user(treg, &sc->sc_hi[3]); mthi3(treg);
+		err |= __get_user(treg, &sc->sc_lo[3]); mthi3(treg);
+		err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
+	}
+#endif
 
 #define restore_gp_reg(i) do {						\
 	err |= __get_user(regs->regs[i], &sc->sc_regs[i]);		\
@@ -112,7 +160,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc)
 static inline void *
 get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
 {
-	unsigned long sp, almask;
+	unsigned long sp;
 
 	/* Default to using normal stack */
 	sp = regs->regs[29];
@@ -128,10 +176,32 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
 	if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags (sp) == 0))
 		sp = current->sas_ss_sp + current->sas_ss_size;
 
-	if (PLAT_TRAMPOLINE_STUFF_LINE)
-		almask = ~(PLAT_TRAMPOLINE_STUFF_LINE - 1);
-	else
-		almask = ALMASK;
+	return (void *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? 32 : ALMASK));
+}
+
+static inline int install_sigtramp(unsigned int __user *tramp,
+	unsigned int syscall)
+{
+	int err;
+
+	/*
+	 * Set up the return code ...
+	 *
+	 *         li      v0, __NR__foo_sigreturn
+	 *         syscall
+	 */
+
+	err = __put_user(0x24020000 + syscall, tramp + 0);
+	err |= __put_user(0x0000000c          , tramp + 1);
+	if (ICACHE_REFILLS_WORKAROUND_WAR) {
+		err |= __put_user(0, tramp + 2);
+		err |= __put_user(0, tramp + 3);
+		err |= __put_user(0, tramp + 4);
+		err |= __put_user(0, tramp + 5);
+		err |= __put_user(0, tramp + 6);
+		err |= __put_user(0, tramp + 7);
+	}
+	flush_cache_sigtramp((unsigned long) tramp);
 
-	return (void *)((sp - frame_size) & almask);
+	return err;
 }
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 0209c1dd1429..9202a17db8f7 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -8,6 +8,7 @@
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  */
 #include <linux/config.h>
+#include <linux/cache.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/personality.h>
@@ -21,6 +22,7 @@
 #include <linux/unistd.h>
 #include <linux/compiler.h>
 
+#include <asm/abi.h>
 #include <asm/asm.h>
 #include <linux/bitops.h>
 #include <asm/cacheflush.h>
@@ -29,6 +31,7 @@
 #include <asm/uaccess.h>
 #include <asm/ucontext.h>
 #include <asm/cpu-features.h>
+#include <asm/war.h>
 
 #include "signal-common.h"
 
@@ -36,7 +39,7 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
-static int do_signal(sigset_t *oldset, struct pt_regs *regs);
+int do_signal(sigset_t *oldset, struct pt_regs *regs);
 
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
@@ -47,9 +50,10 @@ save_static_function(sys_sigsuspend);
 __attribute_used__ noinline static int
 _sys_sigsuspend(nabi_no_regargs struct pt_regs regs)
 {
-	sigset_t *uset, saveset, newset;
+	sigset_t saveset, newset;
+	sigset_t __user *uset;
 
-	uset = (sigset_t *) regs.regs[4];
+	uset = (sigset_t __user *) regs.regs[4];
 	if (copy_from_user(&newset, uset, sizeof(sigset_t)))
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
@@ -75,7 +79,8 @@ save_static_function(sys_rt_sigsuspend);
 __attribute_used__ noinline static int
 _sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 {
-	sigset_t *unewset, saveset, newset;
+	sigset_t saveset, newset;
+	sigset_t __user *unewset;
 	size_t sigsetsize;
 
 	/* XXX Don't preclude handling different sized sigset_t's.  */
@@ -83,7 +88,7 @@ _sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 	if (sigsetsize != sizeof(sigset_t))
 		return -EINVAL;
 
-	unewset = (sigset_t *) regs.regs[4];
+	unewset = (sigset_t __user *) regs.regs[4];
 	if (copy_from_user(&newset, unewset, sizeof(newset)))
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
@@ -147,33 +152,46 @@ asmlinkage int sys_sigaction(int sig, const struct sigaction *act,
 
 asmlinkage int sys_sigaltstack(nabi_no_regargs struct pt_regs regs)
 {
-	const stack_t *uss = (const stack_t *) regs.regs[4];
-	stack_t *uoss = (stack_t *) regs.regs[5];
+	const stack_t __user *uss = (const stack_t __user *) regs.regs[4];
+	stack_t __user *uoss = (stack_t __user *) regs.regs[5];
 	unsigned long usp = regs.regs[29];
 
 	return do_sigaltstack(uss, uoss, usp);
 }
 
-#if PLAT_TRAMPOLINE_STUFF_LINE
-#define __tramp __attribute__((aligned(PLAT_TRAMPOLINE_STUFF_LINE)))
-#else
-#define __tramp
-#endif
-
+/*
+ * Horribly complicated - with the bloody RM9000 workarounds enabled
+ * the signal trampolines is moving to the end of the structure so we can
+ * increase the alignment without breaking software compatibility.
+ */
 #ifdef CONFIG_TRAD_SIGNALS
 struct sigframe {
 	u32 sf_ass[4];			/* argument save space for o32 */
-	u32 sf_code[2] __tramp;		/* signal trampoline */
-	struct sigcontext sf_sc __tramp;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 sf_pad[2];
+#else
+	u32 sf_code[2];			/* signal trampoline */
+#endif
+	struct sigcontext sf_sc;
 	sigset_t sf_mask;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 sf_code[8] ____cacheline_aligned;	/* signal trampoline */
+#endif
 };
 #endif
 
 struct rt_sigframe {
 	u32 rs_ass[4];			/* argument save space for o32 */
-	u32 rs_code[2] __tramp;		/* signal trampoline */
-	struct siginfo rs_info __tramp;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 rs_pad[2];
+#else
+	u32 rs_code[2];			/* signal trampoline */
+#endif
+	struct siginfo rs_info;
 	struct ucontext rs_uc;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 rs_code[8] ____cacheline_aligned;	/* signal trampoline */
+#endif
 };
 
 #ifdef CONFIG_TRAD_SIGNALS
@@ -214,7 +232,7 @@ _sys_sigreturn(nabi_no_regargs struct pt_regs regs)
 badframe:
 	force_sig(SIGSEGV, current);
 }
-#endif
+#endif /* CONFIG_TRAD_SIGNALS */
 
 save_static_function(sys_rt_sigreturn);
 __attribute_used__ noinline static void
@@ -260,7 +278,7 @@ badframe:
 }
 
 #ifdef CONFIG_TRAD_SIGNALS
-static void inline setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
+int setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	int signr, sigset_t *set)
 {
 	struct sigframe *frame;
@@ -270,17 +288,7 @@ static void inline setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
 		goto give_sigsegv;
 
-	/*
-	 * Set up the return code ...
-	 *
-	 *         li      v0, __NR_sigreturn
-	 *         syscall
-	 */
-	if (PLAT_TRAMPOLINE_STUFF_LINE)
-		__clear_user(frame->sf_code, PLAT_TRAMPOLINE_STUFF_LINE);
-	err |= __put_user(0x24020000 + __NR_sigreturn, frame->sf_code + 0);
-	err |= __put_user(0x0000000c                 , frame->sf_code + 1);
-	flush_cache_sigtramp((unsigned long) frame->sf_code);
+	install_sigtramp(frame->sf_code, __NR_sigreturn);
 
 	err |= setup_sigcontext(regs, &frame->sf_sc);
 	err |= __copy_to_user(&frame->sf_mask, set, sizeof(*set));
@@ -309,14 +317,15 @@ static void inline setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	       current->comm, current->pid,
 	       frame, regs->cp0_epc, frame->regs[31]);
 #endif
-        return;
+        return 1;
 
 give_sigsegv:
 	force_sigsegv(signr, current);
+	return 0;
 }
 #endif
 
-static void inline setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
+int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	int signr, sigset_t *set, siginfo_t *info)
 {
 	struct rt_sigframe *frame;
@@ -326,17 +335,7 @@ static void inline setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
 		goto give_sigsegv;
 
-	/*
-	 * Set up the return code ...
-	 *
-	 *         li      v0, __NR_rt_sigreturn
-	 *         syscall
-	 */
-	if (PLAT_TRAMPOLINE_STUFF_LINE)
-		__clear_user(frame->rs_code, PLAT_TRAMPOLINE_STUFF_LINE);
-	err |= __put_user(0x24020000 + __NR_rt_sigreturn, frame->rs_code + 0);
-	err |= __put_user(0x0000000c                    , frame->rs_code + 1);
-	flush_cache_sigtramp((unsigned long) frame->rs_code);
+	install_sigtramp(frame->rs_code, __NR_rt_sigreturn);
 
 	/* Create siginfo.  */
 	err |= copy_siginfo_to_user(&frame->rs_info, info);
@@ -378,18 +377,21 @@ static void inline setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	       current->comm, current->pid,
 	       frame, regs->cp0_epc, regs->regs[31]);
 #endif
-	return;
+	return 1;
 
 give_sigsegv:
 	force_sigsegv(signr, current);
+	return 0;
 }
 
 extern void setup_rt_frame_n32(struct k_sigaction * ka,
 	struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info);
 
-static inline void handle_signal(unsigned long sig, siginfo_t *info,
+static inline int handle_signal(unsigned long sig, siginfo_t *info,
 	struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs)
 {
+	int ret;
+
 	switch(regs->regs[0]) {
 	case ERESTART_RESTARTBLOCK:
 	case ERESTARTNOHAND:
@@ -408,22 +410,10 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info,
 
 	regs->regs[0] = 0;		/* Don't deal with this again.  */
 
-#ifdef CONFIG_TRAD_SIGNALS
-	if (ka->sa.sa_flags & SA_SIGINFO) {
-#else
-	if (1) {
-#endif
-#ifdef CONFIG_MIPS32_N32
-		if ((current->thread.mflags & MF_ABI_MASK) == MF_N32)
-			setup_rt_frame_n32 (ka, regs, sig, oldset, info);
-		else
-#endif
-			setup_rt_frame(ka, regs, sig, oldset, info);
-	}
-#ifdef CONFIG_TRAD_SIGNALS
+	if (sig_uses_siginfo(ka))
+		ret = current->thread.abi->setup_rt_frame(ka, regs, sig, oldset, info);
 	else
-		setup_frame(ka, regs, sig, oldset);
-#endif
+		ret = current->thread.abi->setup_frame(ka, regs, sig, oldset);
 
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
@@ -431,23 +421,16 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info,
 		sigaddset(&current->blocked,sig);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
-}
 
-extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);
-extern int do_irix_signal(sigset_t *oldset, struct pt_regs *regs);
+	return ret;
+}
 
-static int do_signal(sigset_t *oldset, struct pt_regs *regs)
+int do_signal(sigset_t *oldset, struct pt_regs *regs)
 {
 	struct k_sigaction ka;
 	siginfo_t info;
 	int signr;
 
-#ifdef CONFIG_BINFMT_ELF32
-	if ((current->thread.mflags & MF_ABI_MASK) == MF_O32) {
-		return do_signal32(oldset, regs);
-	}
-#endif
-
 	/*
 	 * We want the common case to go fast, which is why we may in certain
 	 * cases get here from kernel mode. Just return without doing anything
@@ -463,10 +446,8 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs)
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		handle_signal(signr, &info, &ka, oldset, regs);
-		return 1;
-	}
+	if (signr > 0)
+		return handle_signal(signr, &info, &ka, oldset, regs);
 
 no_signal:
 	/*
@@ -499,18 +480,6 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, sigset_t *oldset,
 {
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING) {
-#ifdef CONFIG_BINFMT_ELF32
-		if (likely((current->thread.mflags & MF_ABI_MASK) == MF_O32)) {
-			do_signal32(oldset, regs);
-			return;
-		}
-#endif
-#ifdef CONFIG_BINFMT_IRIX
-		if (unlikely(current->personality != PER_LINUX)) {
-			do_irix_signal(oldset, regs);
-			return;
-		}
-#endif
-		do_signal(oldset, regs);
+		current->thread.abi->do_signal(oldset, regs);
 	}
 }
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index 8ddfbd8d425a..dbe821303125 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -7,6 +7,7 @@
  * Copyright (C) 1994 - 2000  Ralf Baechle
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  */
+#include <linux/cache.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
@@ -21,6 +22,7 @@
 #include <linux/suspend.h>
 #include <linux/compiler.h>
 
+#include <asm/abi.h>
 #include <asm/asm.h>
 #include <linux/bitops.h>
 #include <asm/cacheflush.h>
@@ -29,6 +31,7 @@
 #include <asm/ucontext.h>
 #include <asm/system.h>
 #include <asm/fpu.h>
+#include <asm/war.h>
 
 #define SI_PAD_SIZE32   ((SI_MAX_SIZE/sizeof(int)) - 3)
 
@@ -76,8 +79,10 @@ typedef struct compat_siginfo {
 
 		/* POSIX.1b timers */
 		struct {
-			unsigned int _timer1;
-			unsigned int _timer2;
+			timer_t _tid;		/* timer id */
+			int _overrun;		/* overrun count */
+			compat_sigval_t _sigval;/* same as below */
+			int _sys_private;       /* not to be passed to user */
 		} _timer;
 
 		/* POSIX.1b signals */
@@ -259,11 +264,12 @@ asmlinkage int sys32_sigaction(int sig, const struct sigaction32 *act,
 
 	if (act) {
 		old_sigset_t mask;
+		s32 handler;
 
 		if (!access_ok(VERIFY_READ, act, sizeof(*act)))
 			return -EFAULT;
-		err |= __get_user((u32)(u64)new_ka.sa.sa_handler,
-		                  &act->sa_handler);
+		err |= __get_user(handler, &act->sa_handler);
+		new_ka.sa.sa_handler = (void*)(s64)handler;
 		err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
 		err |= __get_user(mask, &act->sa_mask.sig[0]);
 		if (err)
@@ -331,8 +337,9 @@ asmlinkage int sys32_sigaltstack(nabi_no_regargs struct pt_regs regs)
 
 static int restore_sigcontext32(struct pt_regs *regs, struct sigcontext32 *sc)
 {
+	u32 used_math;
 	int err = 0;
-	__u32 used_math;
+	s32 treg;
 
 	/* Always make any pending restarted system calls return -EINTR */
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
@@ -340,6 +347,15 @@ static int restore_sigcontext32(struct pt_regs *regs, struct sigcontext32 *sc)
 	err |= __get_user(regs->cp0_epc, &sc->sc_pc);
 	err |= __get_user(regs->hi, &sc->sc_mdhi);
 	err |= __get_user(regs->lo, &sc->sc_mdlo);
+	if (cpu_has_dsp) {
+		err |= __get_user(treg, &sc->sc_hi1); mthi1(treg);
+		err |= __get_user(treg, &sc->sc_lo1); mtlo1(treg);
+		err |= __get_user(treg, &sc->sc_hi2); mthi2(treg);
+		err |= __get_user(treg, &sc->sc_lo2); mtlo2(treg);
+		err |= __get_user(treg, &sc->sc_hi3); mthi3(treg);
+		err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
+		err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
+	}
 
 #define restore_gp_reg(i) do {						\
 	err |= __get_user(regs->regs[i], &sc->sc_regs[i]);		\
@@ -378,16 +394,30 @@ static int restore_sigcontext32(struct pt_regs *regs, struct sigcontext32 *sc)
 
 struct sigframe {
 	u32 sf_ass[4];			/* argument save space for o32 */
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 sf_pad[2];
+#else
 	u32 sf_code[2];			/* signal trampoline */
+#endif
 	struct sigcontext32 sf_sc;
 	sigset_t sf_mask;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 sf_code[8] ____cacheline_aligned;	/* signal trampoline */
+#endif
 };
 
 struct rt_sigframe32 {
 	u32 rs_ass[4];			/* argument save space for o32 */
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 rs_pad[2];
+#else
 	u32 rs_code[2];			/* signal trampoline */
+#endif
 	compat_siginfo_t rs_info;
 	struct ucontext32 rs_uc;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 rs_code[8] __attribute__((aligned(32)));	/* signal trampoline */
+#endif
 };
 
 int copy_siginfo_to_user32(compat_siginfo_t *to, siginfo_t *from)
@@ -411,6 +441,11 @@ int copy_siginfo_to_user32(compat_siginfo_t *to, siginfo_t *from)
 		err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
 	else {
 		switch (from->si_code >> 16) {
+		case __SI_TIMER >> 16:
+			err |= __put_user(from->si_tid, &to->si_tid);
+			err |= __put_user(from->si_overrun, &to->si_overrun);
+			err |= __put_user(from->si_int, &to->si_int);
+			break;
 		case __SI_CHLD >> 16:
 			err |= __put_user(from->si_utime, &to->si_utime);
 			err |= __put_user(from->si_stime, &to->si_stime);
@@ -480,6 +515,7 @@ __attribute_used__ noinline static void
 _sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 {
 	struct rt_sigframe32 *frame;
+	mm_segment_t old_fs;
 	sigset_t set;
 	stack_t st;
 	s32 sp;
@@ -510,7 +546,10 @@ _sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 
 	/* It is more difficult to avoid calling this function than to
 	   call it and ignore errors.  */
+	old_fs = get_fs();
+	set_fs (KERNEL_DS);
 	do_sigaltstack(&st, NULL, regs.regs[29]);
+	set_fs (old_fs);
 
 	/*
 	 * Don't let your children do this ...
@@ -550,8 +589,15 @@ static inline int setup_sigcontext32(struct pt_regs *regs,
 
 	err |= __put_user(regs->hi, &sc->sc_mdhi);
 	err |= __put_user(regs->lo, &sc->sc_mdlo);
-	err |= __put_user(regs->cp0_cause, &sc->sc_cause);
-	err |= __put_user(regs->cp0_badvaddr, &sc->sc_badvaddr);
+	if (cpu_has_dsp) {
+		err |= __put_user(rddsp(DSP_MASK), &sc->sc_hi1);
+		err |= __put_user(mfhi1(), &sc->sc_hi1);
+		err |= __put_user(mflo1(), &sc->sc_lo1);
+		err |= __put_user(mfhi2(), &sc->sc_hi2);
+		err |= __put_user(mflo2(), &sc->sc_lo2);
+		err |= __put_user(mfhi3(), &sc->sc_hi3);
+		err |= __put_user(mflo3(), &sc->sc_lo3);
+	}
 
 	err |= __put_user(!!used_math(), &sc->sc_used_math);
 
@@ -601,7 +647,7 @@ static inline void *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 	return (void *)((sp - frame_size) & ALMASK);
 }
 
-static inline void setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
+void setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
 			       int signr, sigset_t *set)
 {
 	struct sigframe *frame;
@@ -654,9 +700,7 @@ give_sigsegv:
 	force_sigsegv(signr, current);
 }
 
-static inline void setup_rt_frame(struct k_sigaction * ka,
-				  struct pt_regs *regs, int signr,
-				  sigset_t *set, siginfo_t *info)
+void setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr,	sigset_t *set, siginfo_t *info)
 {
 	struct rt_sigframe32 *frame;
 	int err = 0;
@@ -725,9 +769,11 @@ give_sigsegv:
 	force_sigsegv(signr, current);
 }
 
-static inline void handle_signal(unsigned long sig, siginfo_t *info,
+static inline int handle_signal(unsigned long sig, siginfo_t *info,
 	struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs)
 {
+	int ret;
+
 	switch (regs->regs[0]) {
 	case ERESTART_RESTARTBLOCK:
 	case ERESTARTNOHAND:
@@ -747,9 +793,9 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info,
 	regs->regs[0] = 0;		/* Don't deal with this again.  */
 
 	if (ka->sa.sa_flags & SA_SIGINFO)
-		setup_rt_frame(ka, regs, sig, oldset, info);
+		ret = current->thread.abi->setup_rt_frame(ka, regs, sig, oldset, info);
 	else
-		setup_frame(ka, regs, sig, oldset);
+		ret = current->thread.abi->setup_frame(ka, regs, sig, oldset);
 
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
@@ -757,6 +803,8 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info,
 		sigaddset(&current->blocked,sig);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
+
+	return ret;
 }
 
 int do_signal32(sigset_t *oldset, struct pt_regs *regs)
@@ -780,10 +828,8 @@ int do_signal32(sigset_t *oldset, struct pt_regs *regs)
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		handle_signal(signr, &info, &ka, oldset, regs);
-		return 1;
-	}
+	if (signr > 0)
+		return handle_signal(signr, &info, &ka, oldset, regs);
 
 no_signal:
 	/*
@@ -819,12 +865,13 @@ asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 *act,
 		goto out;
 
 	if (act) {
+		s32 handler;
 		int err = 0;
 
 		if (!access_ok(VERIFY_READ, act, sizeof(*act)))
 			return -EFAULT;
-		err |= __get_user((u32)(u64)new_sa.sa.sa_handler,
-		                  &act->sa_handler);
+		err |= __get_user(handler, &act->sa_handler);
+		new_sa.sa.sa_handler = (void*)(s64)handler;
 		err |= __get_user(new_sa.sa.sa_flags, &act->sa_flags);
 		err |= get_sigset(&new_sa.sa.sa_mask, &act->sa_mask);
 		if (err)
@@ -902,3 +949,30 @@ asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t *uinfo)
 	set_fs (old_fs);
 	return ret;
 }
+
+asmlinkage long
+sys32_waitid(int which, compat_pid_t pid,
+	     compat_siginfo_t __user *uinfo, int options,
+	     struct compat_rusage __user *uru)
+{
+	siginfo_t info;
+	struct rusage ru;
+	long ret;
+	mm_segment_t old_fs = get_fs();
+
+	info.si_signo = 0;
+	set_fs (KERNEL_DS);
+	ret = sys_waitid(which, pid, (siginfo_t __user *) &info, options,
+			 uru ? (struct rusage __user *) &ru : NULL);
+	set_fs (old_fs);
+
+	if (ret < 0 || info.si_signo == 0)
+		return ret;
+
+	if (uru && (ret = put_compat_rusage(&ru, uru)))
+		return ret;
+
+	BUG_ON(info.si_code & __SI_MASK);
+	info.si_code |= __SI_CHLD;
+	return copy_siginfo_to_user32(uinfo, &info);
+}
diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c
index 3544208d4b4b..ec61b2670ba6 100644
--- a/arch/mips/kernel/signal_n32.c
+++ b/arch/mips/kernel/signal_n32.c
@@ -15,6 +15,8 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */
+#include <linux/cache.h>
+#include <linux/sched.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
@@ -36,6 +38,7 @@
 #include <asm/system.h>
 #include <asm/fpu.h>
 #include <asm/cpu-features.h>
+#include <asm/war.h>
 
 #include "signal-common.h"
 
@@ -62,17 +65,18 @@ struct ucontextn32 {
 	sigset_t            uc_sigmask;   /* mask last for extensibility */
 };
 
-#if PLAT_TRAMPOLINE_STUFF_LINE
-#define __tramp __attribute__((aligned(PLAT_TRAMPOLINE_STUFF_LINE)))
-#else
-#define __tramp
-#endif
-
 struct rt_sigframe_n32 {
 	u32 rs_ass[4];			/* argument save space for o32 */
-	u32 rs_code[2] __tramp;		/* signal trampoline */
-	struct siginfo rs_info __tramp;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 rs_pad[2];
+#else
+	u32 rs_code[2];			/* signal trampoline */
+#endif
+	struct siginfo rs_info;
 	struct ucontextn32 rs_uc;
+#if ICACHE_REFILLS_WORKAROUND_WAR
+	u32 rs_code[8] ____cacheline_aligned;		/* signal trampoline */
+#endif
 };
 
 save_static_function(sysn32_rt_sigreturn);
@@ -126,7 +130,7 @@ badframe:
 	force_sig(SIGSEGV, current);
 }
 
-void setup_rt_frame_n32(struct k_sigaction * ka,
+int setup_rt_frame_n32(struct k_sigaction * ka,
 	struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info)
 {
 	struct rt_sigframe_n32 *frame;
@@ -137,17 +141,7 @@ void setup_rt_frame_n32(struct k_sigaction * ka,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
 		goto give_sigsegv;
 
-	/*
-	 * Set up the return code ...
-	 *
-	 *         li      v0, __NR_rt_sigreturn
-	 *         syscall
-	 */
-	if (PLAT_TRAMPOLINE_STUFF_LINE)
-		__clear_user(frame->rs_code, PLAT_TRAMPOLINE_STUFF_LINE);
-	err |= __put_user(0x24020000 + __NR_N32_rt_sigreturn, frame->rs_code + 0);
-	err |= __put_user(0x0000000c                        , frame->rs_code + 1);
-	flush_cache_sigtramp((unsigned long) frame->rs_code);
+	install_sigtramp(frame->rs_code, __NR_N32_rt_sigreturn);
 
 	/* Create siginfo.  */
 	err |= copy_siginfo_to_user(&frame->rs_info, info);
@@ -190,8 +184,9 @@ void setup_rt_frame_n32(struct k_sigaction * ka,
 	       current->comm, current->pid,
 	       frame, regs->cp0_epc, regs->regs[31]);
 #endif
-	return;
+	return 1;
 
 give_sigsegv:
 	force_sigsegv(signr, current);
+	return 0;
 }
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index af5cd3b8a396..fcacf1aae98a 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -50,7 +50,6 @@ static void smp_tune_scheduling (void)
 {
 	struct cache_desc *cd = &current_cpu_data.scache;
 	unsigned long cachesize;       /* kB   */
-	unsigned long bandwidth = 350; /* MB/s */
 	unsigned long cpu_khz;
 
 	/*
@@ -121,7 +120,19 @@ struct call_data_struct *call_data;
  * or are or have executed.
  *
  * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
+ * hardware interrupt handler or from a bottom half handler:
+ *
+ * CPU A                               CPU B
+ * Disable interrupts
+ *                                     smp_call_function()
+ *                                     Take call_lock
+ *                                     Send IPIs
+ *                                     Wait for all cpus to acknowledge IPI
+ *                                     CPU A has not responded, spin waiting
+ *                                     for cpu A to respond, holding call_lock
+ * smp_call_function()
+ * Spin waiting for call_lock
+ * Deadlock                            Deadlock
  */
 int smp_call_function (void (*func) (void *info), void *info, int retry,
 								int wait)
@@ -130,6 +141,11 @@ int smp_call_function (void (*func) (void *info), void *info, int retry,
 	int i, cpus = num_online_cpus() - 1;
 	int cpu = smp_processor_id();
 
+	/*
+	 * Can die spectacularly if this CPU isn't yet marked online
+	 */
+	BUG_ON(!cpu_online(cpu));
+
 	if (!cpus)
 		return 0;
 
@@ -214,7 +230,6 @@ void __init smp_cpus_done(unsigned int max_cpus)
 /* called from main before smp_init() */
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
-	cpu_data[0].udelay_val = loops_per_jiffy;
 	init_new_context(current, &init_mm);
 	current_thread_info()->cpu = 0;
 	smp_tune_scheduling();
@@ -236,23 +251,28 @@ void __devinit smp_prepare_boot_cpu(void)
 }
 
 /*
- * Startup the CPU with this logical number
+ * Called once for each "cpu_possible(cpu)".  Needs to spin up the cpu
+ * and keep control until "cpu_online(cpu)" is set.  Note: cpu is
+ * physical, not logical.
  */
-static int __init do_boot_cpu(int cpu)
+int __devinit __cpu_up(unsigned int cpu)
 {
 	struct task_struct *idle;
 
 	/*
+	 * Processor goes to start_secondary(), sets online flag
 	 * The following code is purely to make sure
 	 * Linux can schedule processes on this slave.
 	 */
 	idle = fork_idle(cpu);
 	if (IS_ERR(idle))
-		panic("failed fork for CPU %d\n", cpu);
+		panic(KERN_ERR "Fork failed for CPU %d", cpu);
 
 	prom_boot_secondary(cpu, idle);
 
-	/* XXXKW timeout */
+	/*
+	 * Trust is futile.  We should really have timeouts ...
+	 */
 	while (!cpu_isset(cpu, cpu_callin_map))
 		udelay(100);
 
@@ -261,23 +281,6 @@ static int __init do_boot_cpu(int cpu)
 	return 0;
 }
 
-/*
- * Called once for each "cpu_possible(cpu)".  Needs to spin up the cpu
- * and keep control until "cpu_online(cpu)" is set.  Note: cpu is
- * physical, not logical.
- */
-int __devinit __cpu_up(unsigned int cpu)
-{
-	int ret;
-
-	/* Processor goes to start_secondary(), sets online flag */
-	ret = do_boot_cpu(cpu);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
 /* Not really SMP stuff ... */
 int setup_profiling_timer(unsigned int multiplier)
 {
diff --git a/arch/mips/kernel/smp_mt.c b/arch/mips/kernel/smp_mt.c
new file mode 100644
index 000000000000..d429544ba4bc
--- /dev/null
+++ b/arch/mips/kernel/smp_mt.c
@@ -0,0 +1,366 @@
+/*
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  Elizabeth Clarke (beth@mips.com)
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/compiler.h>
+
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/cacheflush.h>
+#include <asm/mips-boards/maltaint.h>
+
+#define MIPS_CPU_IPI_RESCHED_IRQ 0
+#define MIPS_CPU_IPI_CALL_IRQ 1
+
+static int cpu_ipi_resched_irq, cpu_ipi_call_irq;
+
+#if 0
+static void dump_mtregisters(int vpe, int tc)
+{
+	printk("vpe %d tc %d\n", vpe, tc);
+
+	settc(tc);
+
+	printk("  c0 status  0x%lx\n", read_vpe_c0_status());
+	printk("  vpecontrol 0x%lx\n", read_vpe_c0_vpecontrol());
+	printk("  vpeconf0    0x%lx\n", read_vpe_c0_vpeconf0());
+	printk("  tcstatus 0x%lx\n", read_tc_c0_tcstatus());
+	printk("  tcrestart 0x%lx\n", read_tc_c0_tcrestart());
+	printk("  tcbind 0x%lx\n", read_tc_c0_tcbind());
+	printk("  tchalt 0x%lx\n", read_tc_c0_tchalt());
+}
+#endif
+
+void __init sanitize_tlb_entries(void)
+{
+	int i, tlbsiz;
+	unsigned long mvpconf0, ncpu;
+
+	if (!cpu_has_mipsmt)
+		return;
+
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	/* Disable TLB sharing */
+	clear_c0_mvpcontrol(MVPCONTROL_STLB);
+
+	mvpconf0 = read_c0_mvpconf0();
+
+	printk(KERN_INFO "MVPConf0 0x%lx TLBS %lx PTLBE %ld\n", mvpconf0,
+		   (mvpconf0 & MVPCONF0_TLBS) >> MVPCONF0_TLBS_SHIFT,
+			   (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT);
+
+	tlbsiz = (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT;
+	ncpu = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+
+	printk(" tlbsiz %d ncpu %ld\n", tlbsiz, ncpu);
+
+	if (tlbsiz > 0) {
+		/* share them out across the vpe's */
+		tlbsiz /= ncpu;
+
+		printk(KERN_INFO "setting Config1.MMU_size to %d\n", tlbsiz);
+
+		for (i = 0; i < ncpu; i++) {
+			settc(i);
+
+			if (i == 0)
+				write_c0_config1((read_c0_config1() & ~(0x3f << 25)) | (tlbsiz << 25));
+			else
+				write_vpe_c0_config1((read_vpe_c0_config1() & ~(0x3f << 25)) |
+						   (tlbsiz << 25));
+		}
+	}
+
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+}
+
+#if 0
+/*
+ * Use c0_MVPConf0 to find out how many CPUs are available, setting up
+ * phys_cpu_present_map and the logical/physical mappings.
+ */
+void __init prom_build_cpu_map(void)
+{
+	int i, num, ncpus;
+
+	cpus_clear(phys_cpu_present_map);
+
+	/* assume we boot on cpu 0.... */
+	cpu_set(0, phys_cpu_present_map);
+	__cpu_number_map[0] = 0;
+	__cpu_logical_map[0] = 0;
+
+	if (cpu_has_mipsmt) {
+		ncpus = ((read_c0_mvpconf0() & (MVPCONF0_PVPE)) >> MVPCONF0_PVPE_SHIFT) + 1;
+		for (i=1, num=0; i< NR_CPUS && i<ncpus; i++) {
+			cpu_set(i, phys_cpu_present_map);
+			__cpu_number_map[i] = ++num;
+			__cpu_logical_map[num] = i;
+		}
+
+		printk(KERN_INFO "%i available secondary CPU(s)\n", num);
+	}
+}
+#endif
+
+static void ipi_resched_dispatch (struct pt_regs *regs)
+{
+	do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ, regs);
+}
+
+static void ipi_call_dispatch (struct pt_regs *regs)
+{
+	do_IRQ(MIPS_CPU_IPI_CALL_IRQ, regs);
+}
+
+irqreturn_t ipi_resched_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	return IRQ_HANDLED;
+}
+
+irqreturn_t ipi_call_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	smp_call_function_interrupt();
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction irq_resched = {
+	.handler	= ipi_resched_interrupt,
+	.flags		= SA_INTERRUPT,
+	.name		= "IPI_resched"
+};
+
+static struct irqaction irq_call = {
+	.handler	= ipi_call_interrupt,
+	.flags		= SA_INTERRUPT,
+	.name		= "IPI_call"
+};
+
+/*
+ * Common setup before any secondaries are started
+ * Make sure all CPU's are in a sensible state before we boot any of the
+ * secondarys
+ */
+void prom_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned long val;
+	int i, num;
+
+	if (!cpu_has_mipsmt)
+		return;
+
+	/* disable MT so we can configure */
+	dvpe();
+	dmt();
+
+	/* Put MVPE's into 'configuration state' */
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	val = read_c0_mvpconf0();
+
+	/* we'll always have more TC's than VPE's, so loop setting everything
+	   to a sensible state */
+	for (i = 0, num = 0; i <= ((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT); i++) {
+		settc(i);
+
+		/* VPE's */
+		if (i <= ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)) {
+
+			/* deactivate all but vpe0 */
+			if (i != 0) {
+				unsigned long tmp = read_vpe_c0_vpeconf0();
+
+				tmp &= ~VPECONF0_VPA;
+
+				/* master VPE */
+				tmp |= VPECONF0_MVP;
+				write_vpe_c0_vpeconf0(tmp);
+
+				/* Record this as available CPU */
+				if (i < max_cpus) {
+					cpu_set(i, phys_cpu_present_map);
+					__cpu_number_map[i]	= ++num;
+					__cpu_logical_map[num]	= i;
+				}
+			}
+
+			/* disable multi-threading with TC's */
+			write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
+
+			if (i != 0) {
+				write_vpe_c0_status((read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0);
+				write_vpe_c0_cause(read_vpe_c0_cause() & ~CAUSEF_IP);
+
+				/* set config to be the same as vpe0, particularly kseg0 coherency alg */
+				write_vpe_c0_config( read_c0_config());
+			}
+
+		}
+
+		/* TC's */
+
+		if (i != 0) {
+			unsigned long tmp;
+
+			/* bind a TC to each VPE, May as well put all excess TC's
+			   on the last VPE */
+			if ( i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)+1) )
+				write_tc_c0_tcbind(read_tc_c0_tcbind() | ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) );
+			else {
+				write_tc_c0_tcbind( read_tc_c0_tcbind() | i);
+
+				/* and set XTC */
+				write_vpe_c0_vpeconf0( read_vpe_c0_vpeconf0() | (i << VPECONF0_XTC_SHIFT));
+			}
+
+			tmp = read_tc_c0_tcstatus();
+
+			/* mark not allocated and not dynamically allocatable */
+			tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+			tmp |= TCSTATUS_IXMT;		/* interrupt exempt */
+			write_tc_c0_tcstatus(tmp);
+
+			write_tc_c0_tchalt(TCHALT_H);
+		}
+	}
+
+	/* Release config state */
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	/* We'll wait until starting the secondaries before starting MVPE */
+
+	printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
+
+	/* set up ipi interrupts */
+	if (cpu_has_vint) {
+		set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
+		set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
+	}
+
+	cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
+	cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ;
+
+	setup_irq(cpu_ipi_resched_irq, &irq_resched);
+	setup_irq(cpu_ipi_call_irq, &irq_call);
+
+	/* need to mark IPI's as IRQ_PER_CPU */
+	irq_desc[cpu_ipi_resched_irq].status |= IRQ_PER_CPU;
+	irq_desc[cpu_ipi_call_irq].status |= IRQ_PER_CPU;
+}
+
+/*
+ * Setup the PC, SP, and GP of a secondary processor and start it
+ * running!
+ * smp_bootstrap is the place to resume from
+ * __KSTK_TOS(idle) is apparently the stack pointer
+ * (unsigned long)idle->thread_info the gp
+ * assumes a 1:1 mapping of TC => VPE
+ */
+void prom_boot_secondary(int cpu, struct task_struct *idle)
+{
+	dvpe();
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	settc(cpu);
+
+	/* restart */
+	write_tc_c0_tcrestart((unsigned long)&smp_bootstrap);
+
+	/* enable the tc this vpe/cpu will be running */
+	write_tc_c0_tcstatus((read_tc_c0_tcstatus() & ~TCSTATUS_IXMT) | TCSTATUS_A);
+
+	write_tc_c0_tchalt(0);
+
+	/* enable the VPE */
+	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
+
+	/* stack pointer */
+	write_tc_gpr_sp( __KSTK_TOS(idle));
+
+	/* global pointer */
+	write_tc_gpr_gp((unsigned long)idle->thread_info);
+
+	flush_icache_range((unsigned long)idle->thread_info,
+					   (unsigned long)idle->thread_info +
+					   sizeof(struct thread_info));
+
+	/* finally out of configuration and into chaos */
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	evpe(EVPE_ENABLE);
+}
+
+void prom_init_secondary(void)
+{
+	write_c0_status((read_c0_status() & ~ST0_IM ) |
+	                (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP7));
+}
+
+void prom_smp_finish(void)
+{
+	write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
+
+	local_irq_enable();
+}
+
+void prom_cpus_done(void)
+{
+}
+
+void core_send_ipi(int cpu, unsigned int action)
+{
+	int i;
+	unsigned long flags;
+	int vpflags;
+
+	local_irq_save (flags);
+
+	vpflags = dvpe();	/* cant access the other CPU's registers whilst MVPE enabled */
+
+	switch (action) {
+	case SMP_CALL_FUNCTION:
+		i = C_SW1;
+		break;
+
+	case SMP_RESCHEDULE_YOURSELF:
+	default:
+		i = C_SW0;
+		break;
+	}
+
+	/* 1:1 mapping of vpe and tc... */
+	settc(cpu);
+	write_vpe_c0_cause(read_vpe_c0_cause() | i);
+	evpe(vpflags);
+
+	local_irq_restore(flags);
+}
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 21e3e13a4b44..ee98eeb65e85 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -7,6 +7,7 @@
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  * Copyright (C) 2001 MIPS Technologies, Inc.
  */
+#include <linux/config.h>
 #include <linux/a.out.h>
 #include <linux/errno.h>
 #include <linux/linkage.h>
@@ -26,6 +27,7 @@
 #include <linux/msg.h>
 #include <linux/shm.h>
 #include <linux/compiler.h>
+#include <linux/module.h>
 
 #include <asm/branch.h>
 #include <asm/cachectl.h>
@@ -56,6 +58,8 @@ out:
 
 unsigned long shm_align_mask = PAGE_SIZE - 1;	/* Sane caches */
 
+EXPORT_SYMBOL(shm_align_mask);
+
 #define COLOUR_ALIGN(addr,pgoff)				\
 	((((addr) + shm_align_mask) & ~shm_align_mask) +	\
 	 (((pgoff) << PAGE_SHIFT) & shm_align_mask))
@@ -173,14 +177,28 @@ _sys_clone(nabi_no_regargs struct pt_regs regs)
 {
 	unsigned long clone_flags;
 	unsigned long newsp;
-	int *parent_tidptr, *child_tidptr;
+	int __user *parent_tidptr, *child_tidptr;
 
 	clone_flags = regs.regs[4];
 	newsp = regs.regs[5];
 	if (!newsp)
 		newsp = regs.regs[29];
-	parent_tidptr = (int *) regs.regs[6];
-	child_tidptr = (int *) regs.regs[7];
+	parent_tidptr = (int __user *) regs.regs[6];
+#ifdef CONFIG_32BIT
+	/* We need to fetch the fifth argument off the stack.  */
+	child_tidptr = NULL;
+	if (clone_flags & (CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID)) {
+		int __user *__user *usp = (int __user *__user *) regs.regs[29];
+		if (regs.regs[2] == __NR_syscall) {
+			if (get_user (child_tidptr, &usp[5]))
+				return -EFAULT;
+		}
+		else if (get_user (child_tidptr, &usp[4]))
+			return -EFAULT;
+	}
+#else
+	child_tidptr = (int __user *) regs.regs[8];
+#endif
 	return do_fork(clone_flags, newsp, &regs, 0,
 	               parent_tidptr, child_tidptr);
 }
@@ -242,6 +260,16 @@ asmlinkage int sys_olduname(struct oldold_utsname * name)
 	return error;
 }
 
+void sys_set_thread_area(unsigned long addr)
+{
+	struct thread_info *ti = current->thread_info;
+
+	ti->tp_value = addr;
+
+	/* If some future MIPS implementation has this register in hardware,
+	 * we will need to update it here (and in context switches).  */
+}
+
 asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
 {
 	int	tmp, len;
diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c
index 7ae4af476974..52924f8ce23c 100644
--- a/arch/mips/kernel/sysirix.c
+++ b/arch/mips/kernel/sysirix.c
@@ -73,32 +73,30 @@ asmlinkage int irix_sysmp(struct pt_regs *regs)
 }
 
 /* The prctl commands. */
-#define PR_MAXPROCS          1 /* Tasks/user. */
-#define PR_ISBLOCKED         2 /* If blocked, return 1. */
-#define PR_SETSTACKSIZE      3 /* Set largest task stack size. */
-#define PR_GETSTACKSIZE      4 /* Get largest task stack size. */
-#define PR_MAXPPROCS         5 /* Num parallel tasks. */
-#define PR_UNBLKONEXEC       6 /* When task exec/exit's, unblock. */
-#define PR_SETEXITSIG        8 /* When task exit's, set signal. */
-#define PR_RESIDENT          9 /* Make task unswappable. */
-#define PR_ATTACHADDR       10 /* (Re-)Connect a vma to a task. */
-#define PR_DETACHADDR       11 /* Disconnect a vma from a task. */
-#define PR_TERMCHILD        12 /* When parent sleeps with fishes, kill child. */
-#define PR_GETSHMASK        13 /* Get the sproc() share mask. */
-#define PR_GETNSHARE        14 /* Number of share group members. */
-#define PR_COREPID          15 /* Add task pid to name when it core. */
-#define	PR_ATTACHADDRPERM   16 /* (Re-)Connect vma, with specified prot. */
-#define PR_PTHREADEXIT      17 /* Kill a pthread without prejudice. */
-
-asmlinkage int irix_prctl(struct pt_regs *regs)
-{
-	unsigned long cmd;
-	int error = 0, base = 0;
+#define PR_MAXPROCS		 1 /* Tasks/user. */
+#define PR_ISBLOCKED		 2 /* If blocked, return 1. */
+#define PR_SETSTACKSIZE		 3 /* Set largest task stack size. */
+#define PR_GETSTACKSIZE		 4 /* Get largest task stack size. */
+#define PR_MAXPPROCS		 5 /* Num parallel tasks. */
+#define PR_UNBLKONEXEC		 6 /* When task exec/exit's, unblock. */
+#define PR_SETEXITSIG		 8 /* When task exit's, set signal. */
+#define PR_RESIDENT		 9 /* Make task unswappable. */
+#define PR_ATTACHADDR		10 /* (Re-)Connect a vma to a task. */
+#define PR_DETACHADDR		11 /* Disconnect a vma from a task. */
+#define PR_TERMCHILD		12 /* Kill child if the parent dies. */
+#define PR_GETSHMASK		13 /* Get the sproc() share mask. */
+#define PR_GETNSHARE		14 /* Number of share group members. */
+#define PR_COREPID		15 /* Add task pid to name when it core. */
+#define PR_ATTACHADDRPERM	16 /* (Re-)Connect vma, with specified prot. */
+#define PR_PTHREADEXIT		17 /* Kill a pthread, only for IRIX 6.[234] */
+
+asmlinkage int irix_prctl(unsigned option, ...)
+{
+	va_list args;
+	int error = 0;
 
-	if (regs->regs[2] == 1000)
-		base = 1;
-	cmd = regs->regs[base + 4];
-	switch (cmd) {
+	va_start(args, option);
+	switch (option) {
 	case PR_MAXPROCS:
 		printk("irix_prctl[%s:%d]: Wants PR_MAXPROCS\n",
 		       current->comm, current->pid);
@@ -111,7 +109,7 @@ asmlinkage int irix_prctl(struct pt_regs *regs)
 		printk("irix_prctl[%s:%d]: Wants PR_ISBLOCKED\n",
 		       current->comm, current->pid);
 		read_lock(&tasklist_lock);
-		task = find_task_by_pid(regs->regs[base + 5]);
+		task = find_task_by_pid(va_arg(args, pid_t));
 		error = -ESRCH;
 		if (error)
 			error = (task->run_list.next != NULL);
@@ -121,7 +119,7 @@ asmlinkage int irix_prctl(struct pt_regs *regs)
 	}
 
 	case PR_SETSTACKSIZE: {
-		long value = regs->regs[base + 5];
+		long value = va_arg(args, long);
 
 		printk("irix_prctl[%s:%d]: Wants PR_SETSTACKSIZE<%08lx>\n",
 		       current->comm, current->pid, (unsigned long) value);
@@ -222,24 +220,20 @@ asmlinkage int irix_prctl(struct pt_regs *regs)
 		error = -EINVAL;
 		break;
 
-	case PR_PTHREADEXIT:
-		printk("irix_prctl[%s:%d]: Wants PR_PTHREADEXIT\n",
-		       current->comm, current->pid);
-		do_exit(regs->regs[base + 5]);
-
 	default:
 		printk("irix_prctl[%s:%d]: Non-existant opcode %d\n",
-		       current->comm, current->pid, (int)cmd);
+		       current->comm, current->pid, option);
 		error = -EINVAL;
 		break;
 	}
+	va_end(args);
 
 	return error;
 }
 
 #undef DEBUG_PROCGRPS
 
-extern unsigned long irix_mapelf(int fd, struct elf_phdr *user_phdrp, int cnt);
+extern unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt);
 extern int getrusage(struct task_struct *p, int who, struct rusage __user *ru);
 extern char *prom_getenv(char *name);
 extern long prom_setenv(char *name, char *value);
@@ -276,23 +270,19 @@ asmlinkage int irix_syssgi(struct pt_regs *regs)
 	cmd = regs->regs[base + 4];
 	switch(cmd) {
 	case SGI_SYSID: {
-		char *buf = (char *) regs->regs[base + 5];
+		char __user *buf = (char __user *) regs->regs[base + 5];
 
 		/* XXX Use ethernet addr.... */
-		retval = clear_user(buf, 64);
+		retval = clear_user(buf, 64) ? -EFAULT : 0;
 		break;
 	}
 #if 0
 	case SGI_RDNAME: {
 		int pid = (int) regs->regs[base + 5];
-		char *buf = (char *) regs->regs[base + 6];
+		char __user *buf = (char __user *) regs->regs[base + 6];
 		struct task_struct *p;
 		char tcomm[sizeof(current->comm)];
 
-		if (!access_ok(VERIFY_WRITE, buf, sizeof(tcomm))) {
-			retval = -EFAULT;
-			break;
-		}
 		read_lock(&tasklist_lock);
 		p = find_task_by_pid(pid);
 		if (!p) {
@@ -304,34 +294,28 @@ asmlinkage int irix_syssgi(struct pt_regs *regs)
 		read_unlock(&tasklist_lock);
 
 		/* XXX Need to check sizes. */
-		copy_to_user(buf, tcomm, sizeof(tcomm));
-		retval = 0;
+		retval = copy_to_user(buf, tcomm, sizeof(tcomm)) ? -EFAULT : 0;
 		break;
 	}
 
 	case SGI_GETNVRAM: {
-		char *name = (char *) regs->regs[base+5];
-		char *buf = (char *) regs->regs[base+6];
+		char __user *name = (char __user *) regs->regs[base+5];
+		char __user *buf = (char __user *) regs->regs[base+6];
 		char *value;
 		return -EINVAL;	/* til I fix it */
-		if (!access_ok(VERIFY_WRITE, buf, 128)) {
-			retval = -EFAULT;
-			break;
-		}
 		value = prom_getenv(name);	/* PROM lock?  */
 		if (!value) {
 			retval = -EINVAL;
 			break;
 		}
 		/* Do I strlen() for the length? */
-		copy_to_user(buf, value, 128);
-		retval = 0;
+		retval = copy_to_user(buf, value, 128) ? -EFAULT : 0;
 		break;
 	}
 
 	case SGI_SETNVRAM: {
-		char *name = (char *) regs->regs[base+5];
-		char *value = (char *) regs->regs[base+6];
+		char __user *name = (char __user *) regs->regs[base+5];
+		char __user *value = (char __user *) regs->regs[base+6];
 		return -EINVAL;	/* til I fix it */
 		retval = prom_setenv(name, value);
 		/* XXX make sure retval conforms to syssgi(2) */
@@ -407,16 +391,16 @@ asmlinkage int irix_syssgi(struct pt_regs *regs)
 
 	case SGI_SETGROUPS:
 		retval = sys_setgroups((int) regs->regs[base + 5],
-		                       (gid_t *) regs->regs[base + 6]);
+		                       (gid_t __user *) regs->regs[base + 6]);
 		break;
 
 	case SGI_GETGROUPS:
 		retval = sys_getgroups((int) regs->regs[base + 5],
-		                       (gid_t *) regs->regs[base + 6]);
+		                       (gid_t __user *) regs->regs[base + 6]);
 		break;
 
 	case SGI_RUSAGE: {
-		struct rusage *ru = (struct rusage *) regs->regs[base + 6];
+		struct rusage __user *ru = (struct rusage __user *) regs->regs[base + 6];
 
 		switch((int) regs->regs[base + 5]) {
 		case 0:
@@ -453,7 +437,7 @@ asmlinkage int irix_syssgi(struct pt_regs *regs)
 
 	case SGI_ELFMAP:
 		retval = irix_mapelf((int) regs->regs[base + 5],
-				     (struct elf_phdr *) regs->regs[base + 6],
+				     (struct elf_phdr __user *) regs->regs[base + 6],
 				     (int) regs->regs[base + 7]);
 		break;
 
@@ -468,24 +452,24 @@ asmlinkage int irix_syssgi(struct pt_regs *regs)
 
 	case SGI_PHYSP: {
 		unsigned long addr = regs->regs[base + 5];
-		int *pageno = (int *) (regs->regs[base + 6]);
+		int __user *pageno = (int __user *) (regs->regs[base + 6]);
 		struct mm_struct *mm = current->mm;
 		pgd_t *pgdp;
+		pud_t *pudp;
 		pmd_t *pmdp;
 		pte_t *ptep;
 
-		if (!access_ok(VERIFY_WRITE, pageno, sizeof(int)))
-			return -EFAULT;
-
 		down_read(&mm->mmap_sem);
 		pgdp = pgd_offset(mm, addr);
-		pmdp = pmd_offset(pgdp, addr);
+		pudp = pud_offset(pgdp, addr);
+		pmdp = pmd_offset(pudp, addr);
 		ptep = pte_offset(pmdp, addr);
 		retval = -EINVAL;
 		if (ptep) {
 			pte_t pte = *ptep;
 
 			if (pte_val(pte) & (_PAGE_VALID | _PAGE_PRESENT)) {
+				/* b0rked on 64-bit */
 				retval =  put_user((pte_val(pte) & PAGE_MASK) >>
 				                   PAGE_SHIFT, pageno);
 			}
@@ -496,7 +480,7 @@ asmlinkage int irix_syssgi(struct pt_regs *regs)
 
 	case SGI_INVENT: {
 		int  arg1    = (int)    regs->regs [base + 5];
-		void *buffer = (void *) regs->regs [base + 6];
+		void __user *buffer = (void __user *) regs->regs [base + 6];
 		int  count   = (int)    regs->regs [base + 7];
 
 		switch (arg1) {
@@ -692,8 +676,8 @@ asmlinkage int irix_pause(void)
 }
 
 /* XXX need more than this... */
-asmlinkage int irix_mount(char *dev_name, char *dir_name, unsigned long flags,
-			  char *type, void *data, int datalen)
+asmlinkage int irix_mount(char __user *dev_name, char __user *dir_name,
+	unsigned long flags, char __user *type, void __user *data, int datalen)
 {
 	printk("[%s:%d] irix_mount(%p,%p,%08lx,%p,%p,%d)\n",
 	       current->comm, current->pid,
@@ -708,8 +692,8 @@ struct irix_statfs {
 	char  f_fname[6], f_fpack[6];
 };
 
-asmlinkage int irix_statfs(const char *path, struct irix_statfs *buf,
-			   int len, int fs_type)
+asmlinkage int irix_statfs(const char __user *path,
+	struct irix_statfs __user *buf, int len, int fs_type)
 {
 	struct nameidata nd;
 	struct kstatfs kbuf;
@@ -724,6 +708,7 @@ asmlinkage int irix_statfs(const char *path, struct irix_statfs *buf,
 		error = -EFAULT;
 		goto out;
 	}
+
 	error = user_path_walk(path, &nd);
 	if (error)
 		goto out;
@@ -732,18 +717,17 @@ asmlinkage int irix_statfs(const char *path, struct irix_statfs *buf,
 	if (error)
 		goto dput_and_out;
 
-	__put_user(kbuf.f_type, &buf->f_type);
-	__put_user(kbuf.f_bsize, &buf->f_bsize);
-	__put_user(kbuf.f_frsize, &buf->f_frsize);
-	__put_user(kbuf.f_blocks, &buf->f_blocks);
-	__put_user(kbuf.f_bfree, &buf->f_bfree);
-	__put_user(kbuf.f_files, &buf->f_files);
-	__put_user(kbuf.f_ffree, &buf->f_ffree);
+	error = __put_user(kbuf.f_type, &buf->f_type);
+	error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
+	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+	error |= __put_user(kbuf.f_files, &buf->f_files);
+	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
 	for (i = 0; i < 6; i++) {
-		__put_user(0, &buf->f_fname[i]);
-		__put_user(0, &buf->f_fpack[i]);
+		error |= __put_user(0, &buf->f_fname[i]);
+		error |= __put_user(0, &buf->f_fpack[i]);
 	}
-	error = 0;
 
 dput_and_out:
 	path_release(&nd);
@@ -751,7 +735,7 @@ out:
 	return error;
 }
 
-asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs *buf)
+asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs __user *buf)
 {
 	struct kstatfs kbuf;
 	struct file *file;
@@ -761,6 +745,7 @@ asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs *buf)
 		error = -EFAULT;
 		goto out;
 	}
+
 	if (!(file = fget(fd))) {
 		error = -EBADF;
 		goto out;
@@ -770,16 +755,17 @@ asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs *buf)
 	if (error)
 		goto out_f;
 
-	__put_user(kbuf.f_type, &buf->f_type);
-	__put_user(kbuf.f_bsize, &buf->f_bsize);
-	__put_user(kbuf.f_frsize, &buf->f_frsize);
-	__put_user(kbuf.f_blocks, &buf->f_blocks);
-	__put_user(kbuf.f_bfree, &buf->f_bfree);
-	__put_user(kbuf.f_files, &buf->f_files);
-	__put_user(kbuf.f_ffree, &buf->f_ffree);
-	for(i = 0; i < 6; i++) {
-		__put_user(0, &buf->f_fname[i]);
-		__put_user(0, &buf->f_fpack[i]);
+	error = __put_user(kbuf.f_type, &buf->f_type);
+	error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
+	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+	error |= __put_user(kbuf.f_files, &buf->f_files);
+	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+
+	for (i = 0; i < 6; i++) {
+		error |= __put_user(0, &buf->f_fname[i]);
+		error |= __put_user(0, &buf->f_fpack[i]);
 	}
 
 out_f:
@@ -806,14 +792,15 @@ asmlinkage int irix_setpgrp(int flags)
 	return error;
 }
 
-asmlinkage int irix_times(struct tms * tbuf)
+asmlinkage int irix_times(struct tms __user *tbuf)
 {
 	int err = 0;
 
 	if (tbuf) {
 		if (!access_ok(VERIFY_WRITE,tbuf,sizeof *tbuf))
 			return -EFAULT;
-		err |= __put_user(current->utime, &tbuf->tms_utime);
+
+		err = __put_user(current->utime, &tbuf->tms_utime);
 		err |= __put_user(current->stime, &tbuf->tms_stime);
 		err |= __put_user(current->signal->cutime, &tbuf->tms_cutime);
 		err |= __put_user(current->signal->cstime, &tbuf->tms_cstime);
@@ -829,13 +816,13 @@ asmlinkage int irix_exec(struct pt_regs *regs)
 
 	if(regs->regs[2] == 1000)
 		base = 1;
-	filename = getname((char *) (long)regs->regs[base + 4]);
+	filename = getname((char __user *) (long)regs->regs[base + 4]);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		return error;
 
-	error = do_execve(filename, (char **) (long)regs->regs[base + 5],
-	                  (char **) 0, regs);
+	error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5],
+	                  NULL, regs);
 	putname(filename);
 
 	return error;
@@ -848,12 +835,12 @@ asmlinkage int irix_exece(struct pt_regs *regs)
 
 	if (regs->regs[2] == 1000)
 		base = 1;
-	filename = getname((char *) (long)regs->regs[base + 4]);
+	filename = getname((char __user *) (long)regs->regs[base + 4]);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		return error;
-	error = do_execve(filename, (char **) (long)regs->regs[base + 5],
-	                  (char **) (long)regs->regs[base + 6], regs);
+	error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5],
+	                  (char __user * __user *) (long)regs->regs[base + 6], regs);
 	putname(filename);
 
 	return error;
@@ -909,22 +896,17 @@ asmlinkage int irix_socket(int family, int type, int protocol)
 	return sys_socket(family, type, protocol);
 }
 
-asmlinkage int irix_getdomainname(char *name, int len)
+asmlinkage int irix_getdomainname(char __user *name, int len)
 {
-	int error;
-
-	if (!access_ok(VERIFY_WRITE, name, len))
-		return -EFAULT;
+	int err;
 
 	down_read(&uts_sem);
 	if (len > __NEW_UTS_LEN)
 		len = __NEW_UTS_LEN;
-	error = 0;
-	if (copy_to_user(name, system_utsname.domainname, len))
-		error = -EFAULT;
+	err = copy_to_user(name, system_utsname.domainname, len) ? -EFAULT : 0;
 	up_read(&uts_sem);
 
-	return error;
+	return err;
 }
 
 asmlinkage unsigned long irix_getpagesize(void)
@@ -940,12 +922,13 @@ asmlinkage int irix_msgsys(int opcode, unsigned long arg0, unsigned long arg1,
 	case 0:
 		return sys_msgget((key_t) arg0, (int) arg1);
 	case 1:
-		return sys_msgctl((int) arg0, (int) arg1, (struct msqid_ds *)arg2);
+		return sys_msgctl((int) arg0, (int) arg1,
+		                  (struct msqid_ds __user *)arg2);
 	case 2:
-		return sys_msgrcv((int) arg0, (struct msgbuf *) arg1,
+		return sys_msgrcv((int) arg0, (struct msgbuf __user *) arg1,
 				  (size_t) arg2, (long) arg3, (int) arg4);
 	case 3:
-		return sys_msgsnd((int) arg0, (struct msgbuf *) arg1,
+		return sys_msgsnd((int) arg0, (struct msgbuf __user *) arg1,
 				  (size_t) arg2, (int) arg3);
 	default:
 		return -EINVAL;
@@ -957,12 +940,13 @@ asmlinkage int irix_shmsys(int opcode, unsigned long arg0, unsigned long arg1,
 {
 	switch (opcode) {
 	case 0:
-		return do_shmat((int) arg0, (char *)arg1, (int) arg2,
+		return do_shmat((int) arg0, (char __user *) arg1, (int) arg2,
 				 (unsigned long *) arg3);
 	case 1:
-		return sys_shmctl((int)arg0, (int)arg1, (struct shmid_ds *)arg2);
+		return sys_shmctl((int)arg0, (int)arg1,
+		                  (struct shmid_ds __user *)arg2);
 	case 2:
-		return sys_shmdt((char *)arg0);
+		return sys_shmdt((char __user *)arg0);
 	case 3:
 		return sys_shmget((key_t) arg0, (int) arg1, (int) arg2);
 	default:
@@ -980,7 +964,7 @@ asmlinkage int irix_semsys(int opcode, unsigned long arg0, unsigned long arg1,
 	case 1:
 		return sys_semget((key_t) arg0, (int) arg1, (int) arg2);
 	case 2:
-		return sys_semop((int) arg0, (struct sembuf *)arg1,
+		return sys_semop((int) arg0, (struct sembuf __user *)arg1,
 				 (unsigned int) arg2);
 	default:
 		return -EINVAL;
@@ -998,15 +982,16 @@ static inline loff_t llseek(struct file *file, loff_t offset, int origin)
 	lock_kernel();
 	retval = fn(file, offset, origin);
 	unlock_kernel();
+
 	return retval;
 }
 
 asmlinkage int irix_lseek64(int fd, int _unused, int offhi, int offlow,
                             int origin)
 {
-	int retval;
 	struct file * file;
 	loff_t offset;
+	int retval;
 
 	retval = -EBADF;
 	file = fget(fd);
@@ -1031,12 +1016,12 @@ asmlinkage int irix_sginap(int ticks)
 	return 0;
 }
 
-asmlinkage int irix_sgikopt(char *istring, char *ostring, int len)
+asmlinkage int irix_sgikopt(char __user *istring, char __user *ostring, int len)
 {
 	return -EINVAL;
 }
 
-asmlinkage int irix_gettimeofday(struct timeval *tv)
+asmlinkage int irix_gettimeofday(struct timeval __user *tv)
 {
 	time_t sec;
 	long nsec, seq;
@@ -1077,7 +1062,7 @@ asmlinkage unsigned long irix_mmap32(unsigned long addr, size_t len, int prot,
 
 			if (max_size > file->f_dentry->d_inode->i_size) {
 				old_pos = sys_lseek (fd, max_size - 1, 0);
-				sys_write (fd, "", 1);
+				sys_write (fd, (void __user *) "", 1);
 				sys_lseek (fd, old_pos, 0);
 			}
 		}
@@ -1102,7 +1087,7 @@ asmlinkage int irix_madvise(unsigned long addr, int len, int behavior)
 	return -EINVAL;
 }
 
-asmlinkage int irix_pagelock(char *addr, int len, int op)
+asmlinkage int irix_pagelock(char __user *addr, int len, int op)
 {
 	printk("[%s:%d] Wheee.. irix_pagelock(%p,%d,%d)\n",
 	       current->comm, current->pid, addr, len, op);
@@ -1142,7 +1127,7 @@ asmlinkage int irix_BSDsetpgrp(int pid, int pgrp)
 	return error;
 }
 
-asmlinkage int irix_systeminfo(int cmd, char *buf, int cnt)
+asmlinkage int irix_systeminfo(int cmd, char __user *buf, int cnt)
 {
 	printk("[%s:%d] Wheee.. irix_systeminfo(%d,%p,%d)\n",
 	       current->comm, current->pid, cmd, buf, cnt);
@@ -1158,14 +1143,14 @@ struct iuname {
 	char _unused3[257], _unused4[257], _unused5[257];
 };
 
-asmlinkage int irix_uname(struct iuname *buf)
+asmlinkage int irix_uname(struct iuname __user *buf)
 {
 	down_read(&uts_sem);
-	if (copy_to_user(system_utsname.sysname, buf->sysname, 65)
-	    || copy_to_user(system_utsname.nodename, buf->nodename, 65)
-	    || copy_to_user(system_utsname.release, buf->release, 65)
-	    || copy_to_user(system_utsname.version, buf->version, 65)
-	    || copy_to_user(system_utsname.machine, buf->machine, 65)) {
+	if (copy_from_user(system_utsname.sysname, buf->sysname, 65)
+	    || copy_from_user(system_utsname.nodename, buf->nodename, 65)
+	    || copy_from_user(system_utsname.release, buf->release, 65)
+	    || copy_from_user(system_utsname.version, buf->version, 65)
+	    || copy_from_user(system_utsname.machine, buf->machine, 65)) {
 		return -EFAULT;
 	}
 	up_read(&uts_sem);
@@ -1175,7 +1160,7 @@ asmlinkage int irix_uname(struct iuname *buf)
 
 #undef DEBUG_XSTAT
 
-static int irix_xstat32_xlate(struct kstat *stat, void *ubuf)
+static int irix_xstat32_xlate(struct kstat *stat, void __user *ubuf)
 {
 	struct xstat32 {
 		u32 st_dev, st_pad1[3], st_ino, st_mode, st_nlink, st_uid, st_gid;
@@ -1215,7 +1200,7 @@ static int irix_xstat32_xlate(struct kstat *stat, void *ubuf)
 	return copy_to_user(ubuf, &ub, sizeof(ub)) ? -EFAULT : 0;
 }
 
-static int irix_xstat64_xlate(struct kstat *stat, void *ubuf)
+static int irix_xstat64_xlate(struct kstat *stat, void __user *ubuf)
 {
 	struct xstat64 {
 		u32 st_dev; s32 st_pad1[3];
@@ -1265,7 +1250,7 @@ static int irix_xstat64_xlate(struct kstat *stat, void *ubuf)
 	return copy_to_user(ubuf, &ks, sizeof(ks)) ? -EFAULT : 0;
 }
 
-asmlinkage int irix_xstat(int version, char *filename, struct stat *statbuf)
+asmlinkage int irix_xstat(int version, char __user *filename, struct stat __user *statbuf)
 {
 	int retval;
 	struct kstat stat;
@@ -1291,7 +1276,7 @@ asmlinkage int irix_xstat(int version, char *filename, struct stat *statbuf)
 	return retval;
 }
 
-asmlinkage int irix_lxstat(int version, char *filename, struct stat *statbuf)
+asmlinkage int irix_lxstat(int version, char __user *filename, struct stat __user *statbuf)
 {
 	int error;
 	struct kstat stat;
@@ -1318,7 +1303,7 @@ asmlinkage int irix_lxstat(int version, char *filename, struct stat *statbuf)
 	return error;
 }
 
-asmlinkage int irix_fxstat(int version, int fd, struct stat *statbuf)
+asmlinkage int irix_fxstat(int version, int fd, struct stat __user *statbuf)
 {
 	int error;
 	struct kstat stat;
@@ -1344,7 +1329,7 @@ asmlinkage int irix_fxstat(int version, int fd, struct stat *statbuf)
 	return error;
 }
 
-asmlinkage int irix_xmknod(int ver, char *filename, int mode, unsigned dev)
+asmlinkage int irix_xmknod(int ver, char __user *filename, int mode, unsigned dev)
 {
 	int retval;
 	printk("[%s:%d] Wheee.. irix_xmknod(%d,%s,%x,%x)\n",
@@ -1364,7 +1349,7 @@ asmlinkage int irix_xmknod(int ver, char *filename, int mode, unsigned dev)
 	return retval;
 }
 
-asmlinkage int irix_swapctl(int cmd, char *arg)
+asmlinkage int irix_swapctl(int cmd, char __user *arg)
 {
 	printk("[%s:%d] Wheee.. irix_swapctl(%d,%p)\n",
 	       current->comm, current->pid, cmd, arg);
@@ -1380,7 +1365,7 @@ struct irix_statvfs {
 	char	f_fstr[32]; u32 f_filler[16];
 };
 
-asmlinkage int irix_statvfs(char *fname, struct irix_statvfs *buf)
+asmlinkage int irix_statvfs(char __user *fname, struct irix_statvfs __user *buf)
 {
 	struct nameidata nd;
 	struct kstatfs kbuf;
@@ -1388,10 +1373,9 @@ asmlinkage int irix_statvfs(char *fname, struct irix_statvfs *buf)
 
 	printk("[%s:%d] Wheee.. irix_statvfs(%s,%p)\n",
 	       current->comm, current->pid, fname, buf);
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) {
-		error = -EFAULT;
-		goto out;
-	}
+	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs)))
+		return -EFAULT;
+
 	error = user_path_walk(fname, &nd);
 	if (error)
 		goto out;
@@ -1399,27 +1383,25 @@ asmlinkage int irix_statvfs(char *fname, struct irix_statvfs *buf)
 	if (error)
 		goto dput_and_out;
 
-	__put_user(kbuf.f_bsize, &buf->f_bsize);
-	__put_user(kbuf.f_frsize, &buf->f_frsize);
-	__put_user(kbuf.f_blocks, &buf->f_blocks);
-	__put_user(kbuf.f_bfree, &buf->f_bfree);
-	__put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
-	__put_user(kbuf.f_files, &buf->f_files);
-	__put_user(kbuf.f_ffree, &buf->f_ffree);
-	__put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
+	error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
+	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
+	error |= __put_user(kbuf.f_files, &buf->f_files);
+	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+	error |= __put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
 #ifdef __MIPSEB__
-	__put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
+	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
 #else
-	__put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
+	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
 #endif
 	for (i = 0; i < 16; i++)
-		__put_user(0, &buf->f_basetype[i]);
-	__put_user(0, &buf->f_flag);
-	__put_user(kbuf.f_namelen, &buf->f_namemax);
+		error |= __put_user(0, &buf->f_basetype[i]);
+	error |= __put_user(0, &buf->f_flag);
+	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
 	for (i = 0; i < 32; i++)
-		__put_user(0, &buf->f_fstr[i]);
-
-	error = 0;
+		error |= __put_user(0, &buf->f_fstr[i]);
 
 dput_and_out:
 	path_release(&nd);
@@ -1427,7 +1409,7 @@ out:
 	return error;
 }
 
-asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs *buf)
+asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs __user *buf)
 {
 	struct kstatfs kbuf;
 	struct file *file;
@@ -1436,10 +1418,9 @@ asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs *buf)
 	printk("[%s:%d] Wheee.. irix_fstatvfs(%d,%p)\n",
 	       current->comm, current->pid, fd, buf);
 
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) {
-		error = -EFAULT;
-		goto out;
-	}
+	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs)))
+		return -EFAULT;
+
 	if (!(file = fget(fd))) {
 		error = -EBADF;
 		goto out;
@@ -1448,24 +1429,24 @@ asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs *buf)
 	if (error)
 		goto out_f;
 
-	__put_user(kbuf.f_bsize, &buf->f_bsize);
-	__put_user(kbuf.f_frsize, &buf->f_frsize);
-	__put_user(kbuf.f_blocks, &buf->f_blocks);
-	__put_user(kbuf.f_bfree, &buf->f_bfree);
-	__put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
-	__put_user(kbuf.f_files, &buf->f_files);
-	__put_user(kbuf.f_ffree, &buf->f_ffree);
-	__put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
+	error = __put_user(kbuf.f_bsize, &buf->f_bsize);
+	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
+	error |= __put_user(kbuf.f_files, &buf->f_files);
+	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+	error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
 #ifdef __MIPSEB__
-	__put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
+	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
 #else
-	__put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
+	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
 #endif
 	for(i = 0; i < 16; i++)
-		__put_user(0, &buf->f_basetype[i]);
-	__put_user(0, &buf->f_flag);
-	__put_user(kbuf.f_namelen, &buf->f_namemax);
-	__clear_user(&buf->f_fstr, sizeof(buf->f_fstr));
+		error |= __put_user(0, &buf->f_basetype[i]);
+	error |= __put_user(0, &buf->f_flag);
+	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
+	error |= __clear_user(&buf->f_fstr, sizeof(buf->f_fstr)) ? -EFAULT : 0;
 
 out_f:
 	fput(file);
@@ -1489,7 +1470,7 @@ asmlinkage int irix_sigqueue(int pid, int sig, int code, int val)
 	return -EINVAL;
 }
 
-asmlinkage int irix_truncate64(char *name, int pad, int size1, int size2)
+asmlinkage int irix_truncate64(char __user *name, int pad, int size1, int size2)
 {
 	int retval;
 
@@ -1522,6 +1503,7 @@ asmlinkage int irix_mmap64(struct pt_regs *regs)
 	int len, prot, flags, fd, off1, off2, error, base = 0;
 	unsigned long addr, pgoff, *sp;
 	struct file *file = NULL;
+	int err;
 
 	if (regs->regs[2] == 1000)
 		base = 1;
@@ -1531,36 +1513,31 @@ asmlinkage int irix_mmap64(struct pt_regs *regs)
 	prot = regs->regs[base + 6];
 	if (!base) {
 		flags = regs->regs[base + 7];
-		if (!access_ok(VERIFY_READ, sp, (4 * sizeof(unsigned long)))) {
-			error = -EFAULT;
-			goto out;
-		}
+		if (!access_ok(VERIFY_READ, sp, (4 * sizeof(unsigned long))))
+			return -EFAULT;
 		fd = sp[0];
-		__get_user(off1, &sp[1]);
-		__get_user(off2, &sp[2]);
+		err = __get_user(off1, &sp[1]);
+		err |= __get_user(off2, &sp[2]);
 	} else {
-		if (!access_ok(VERIFY_READ, sp, (5 * sizeof(unsigned long)))) {
-			error = -EFAULT;
-			goto out;
-		}
-		__get_user(flags, &sp[0]);
-		__get_user(fd, &sp[1]);
-		__get_user(off1, &sp[2]);
-		__get_user(off2, &sp[3]);
+		if (!access_ok(VERIFY_READ, sp, (5 * sizeof(unsigned long))))
+			return -EFAULT;
+		err = __get_user(flags, &sp[0]);
+		err |= __get_user(fd, &sp[1]);
+		err |= __get_user(off1, &sp[2]);
+		err |= __get_user(off2, &sp[3]);
 	}
 
-	if (off1 & PAGE_MASK) {
-		error = -EOVERFLOW;
-		goto out;
-	}
+	if (err)
+		return err;
+
+	if (off1 & PAGE_MASK)
+		return -EOVERFLOW;
 
 	pgoff = (off1 << (32 - PAGE_SHIFT)) | (off2 >> PAGE_SHIFT);
 
 	if (!(flags & MAP_ANONYMOUS)) {
-		if (!(file = fget(fd))) {
-			error = -EBADF;
-			goto out;
-		}
+		if (!(file = fget(fd)))
+			return -EBADF;
 
 		/* Ok, bad taste hack follows, try to think in something else
 		   when reading this */
@@ -1570,7 +1547,7 @@ asmlinkage int irix_mmap64(struct pt_regs *regs)
 
 			if (max_size > file->f_dentry->d_inode->i_size) {
 				old_pos = sys_lseek (fd, max_size - 1, 0);
-				sys_write (fd, "", 1);
+				sys_write (fd, (void __user *) "", 1);
 				sys_lseek (fd, old_pos, 0);
 			}
 		}
@@ -1585,7 +1562,6 @@ asmlinkage int irix_mmap64(struct pt_regs *regs)
 	if (file)
 		fput(file);
 
-out:
 	return error;
 }
 
@@ -1597,7 +1573,7 @@ asmlinkage int irix_dmi(struct pt_regs *regs)
 	return -EINVAL;
 }
 
-asmlinkage int irix_pread(int fd, char *buf, int cnt, int off64,
+asmlinkage int irix_pread(int fd, char __user *buf, int cnt, int off64,
 			  int off1, int off2)
 {
 	printk("[%s:%d] Wheee.. irix_pread(%d,%p,%d,%d,%d,%d)\n",
@@ -1606,7 +1582,7 @@ asmlinkage int irix_pread(int fd, char *buf, int cnt, int off64,
 	return -EINVAL;
 }
 
-asmlinkage int irix_pwrite(int fd, char *buf, int cnt, int off64,
+asmlinkage int irix_pwrite(int fd, char __user *buf, int cnt, int off64,
 			   int off1, int off2)
 {
 	printk("[%s:%d] Wheee.. irix_pwrite(%d,%p,%d,%d,%d,%d)\n",
@@ -1638,7 +1614,7 @@ struct irix_statvfs64 {
 	u32  f_filler[16];
 };
 
-asmlinkage int irix_statvfs64(char *fname, struct irix_statvfs64 *buf)
+asmlinkage int irix_statvfs64(char __user *fname, struct irix_statvfs64 __user *buf)
 {
 	struct nameidata nd;
 	struct kstatfs kbuf;
@@ -1650,6 +1626,7 @@ asmlinkage int irix_statvfs64(char *fname, struct irix_statvfs64 *buf)
 		error = -EFAULT;
 		goto out;
 	}
+
 	error = user_path_walk(fname, &nd);
 	if (error)
 		goto out;
@@ -1657,27 +1634,25 @@ asmlinkage int irix_statvfs64(char *fname, struct irix_statvfs64 *buf)
 	if (error)
 		goto dput_and_out;
 
-	__put_user(kbuf.f_bsize, &buf->f_bsize);
-	__put_user(kbuf.f_frsize, &buf->f_frsize);
-	__put_user(kbuf.f_blocks, &buf->f_blocks);
-	__put_user(kbuf.f_bfree, &buf->f_bfree);
-	__put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
-	__put_user(kbuf.f_files, &buf->f_files);
-	__put_user(kbuf.f_ffree, &buf->f_ffree);
-	__put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
+	error = __put_user(kbuf.f_bsize, &buf->f_bsize);
+	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
+	error |= __put_user(kbuf.f_files, &buf->f_files);
+	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+	error |= __put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
 #ifdef __MIPSEB__
-	__put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
+	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
 #else
-	__put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
+	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
 #endif
 	for(i = 0; i < 16; i++)
-		__put_user(0, &buf->f_basetype[i]);
-	__put_user(0, &buf->f_flag);
-	__put_user(kbuf.f_namelen, &buf->f_namemax);
+		error |= __put_user(0, &buf->f_basetype[i]);
+	error |= __put_user(0, &buf->f_flag);
+	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
 	for(i = 0; i < 32; i++)
-		__put_user(0, &buf->f_fstr[i]);
-
-	error = 0;
+		error |= __put_user(0, &buf->f_fstr[i]);
 
 dput_and_out:
 	path_release(&nd);
@@ -1685,7 +1660,7 @@ out:
 	return error;
 }
 
-asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs *buf)
+asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs __user *buf)
 {
 	struct kstatfs kbuf;
 	struct file *file;
@@ -1706,24 +1681,24 @@ asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs *buf)
 	if (error)
 		goto out_f;
 
-	__put_user(kbuf.f_bsize, &buf->f_bsize);
-	__put_user(kbuf.f_frsize, &buf->f_frsize);
-	__put_user(kbuf.f_blocks, &buf->f_blocks);
-	__put_user(kbuf.f_bfree, &buf->f_bfree);
-	__put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
-	__put_user(kbuf.f_files, &buf->f_files);
-	__put_user(kbuf.f_ffree, &buf->f_ffree);
-	__put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
+	error = __put_user(kbuf.f_bsize, &buf->f_bsize);
+	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
+	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
+	error |= __put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
+	error |= __put_user(kbuf.f_files, &buf->f_files);
+	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
+	error |= __put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
 #ifdef __MIPSEB__
-	__put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
+	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
 #else
-	__put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
+	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
 #endif
 	for(i = 0; i < 16; i++)
-		__put_user(0, &buf->f_basetype[i]);
-	__put_user(0, &buf->f_flag);
-	__put_user(kbuf.f_namelen, &buf->f_namemax);
-	__clear_user(buf->f_fstr, sizeof(buf->f_fstr[i]));
+		error |= __put_user(0, &buf->f_basetype[i]);
+	error |= __put_user(0, &buf->f_flag);
+	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
+	error |= __clear_user(buf->f_fstr, sizeof(buf->f_fstr[i])) ? -EFAULT : 0;
 
 out_f:
 	fput(file);
@@ -1731,9 +1706,9 @@ out:
 	return error;
 }
 
-asmlinkage int irix_getmountid(char *fname, unsigned long *midbuf)
+asmlinkage int irix_getmountid(char __user *fname, unsigned long __user *midbuf)
 {
-	int err = 0;
+	int err;
 
 	printk("[%s:%d] irix_getmountid(%s, %p)\n",
 	       current->comm, current->pid, fname, midbuf);
@@ -1746,7 +1721,7 @@ asmlinkage int irix_getmountid(char *fname, unsigned long *midbuf)
 	 * fsid of the filesystem to try and make the right decision, but
 	 * we don't have this so for now. XXX
 	 */
-	err |= __put_user(0, &midbuf[0]);
+	err = __put_user(0, &midbuf[0]);
 	err |= __put_user(0, &midbuf[1]);
 	err |= __put_user(0, &midbuf[2]);
 	err |= __put_user(0, &midbuf[3]);
@@ -1773,8 +1748,8 @@ struct irix_dirent32 {
 };
 
 struct irix_dirent32_callback {
-	struct irix_dirent32 *current_dir;
-	struct irix_dirent32 *previous;
+	struct irix_dirent32 __user *current_dir;
+	struct irix_dirent32 __user *previous;
 	int count;
 	int error;
 };
@@ -1782,13 +1757,13 @@ struct irix_dirent32_callback {
 #define NAME_OFFSET32(de) ((int) ((de)->d_name - (char *) (de)))
 #define ROUND_UP32(x) (((x)+sizeof(u32)-1) & ~(sizeof(u32)-1))
 
-static int irix_filldir32(void *__buf, const char *name, int namlen,
-                          loff_t offset, ino_t ino, unsigned int d_type)
+static int irix_filldir32(void *__buf, const char *name,
+	int namlen, loff_t offset, ino_t ino, unsigned int d_type)
 {
-	struct irix_dirent32 *dirent;
-	struct irix_dirent32_callback *buf =
-		 (struct irix_dirent32_callback *)__buf;
+	struct irix_dirent32 __user *dirent;
+	struct irix_dirent32_callback *buf = __buf;
 	unsigned short reclen = ROUND_UP32(NAME_OFFSET32(dirent) + namlen + 1);
+	int err = 0;
 
 #ifdef DEBUG_GETDENTS
 	printk("\nirix_filldir32[reclen<%d>namlen<%d>count<%d>]",
@@ -1799,25 +1774,26 @@ static int irix_filldir32(void *__buf, const char *name, int namlen,
 		return -EINVAL;
 	dirent = buf->previous;
 	if (dirent)
-		__put_user(offset, &dirent->d_off);
+		err = __put_user(offset, &dirent->d_off);
 	dirent = buf->current_dir;
-	buf->previous = dirent;
-	__put_user(ino, &dirent->d_ino);
-	__put_user(reclen, &dirent->d_reclen);
-	copy_to_user(dirent->d_name, name, namlen);
-	__put_user(0, &dirent->d_name[namlen]);
-	((char *) dirent) += reclen;
+	err |= __put_user(dirent, &buf->previous);
+	err |= __put_user(ino, &dirent->d_ino);
+	err |= __put_user(reclen, &dirent->d_reclen);
+	err |= copy_to_user((char __user *)dirent->d_name, name, namlen) ? -EFAULT : 0;
+	err |= __put_user(0, &dirent->d_name[namlen]);
+	dirent = (struct irix_dirent32 __user *) ((char __user *) dirent + reclen);
+
 	buf->current_dir = dirent;
 	buf->count -= reclen;
 
-	return 0;
+	return err;
 }
 
-asmlinkage int irix_ngetdents(unsigned int fd, void * dirent,
-	unsigned int count, int *eob)
+asmlinkage int irix_ngetdents(unsigned int fd, void __user * dirent,
+	unsigned int count, int __user *eob)
 {
 	struct file *file;
-	struct irix_dirent32 *lastdirent;
+	struct irix_dirent32 __user *lastdirent;
 	struct irix_dirent32_callback buf;
 	int error;
 
@@ -1830,7 +1806,7 @@ asmlinkage int irix_ngetdents(unsigned int fd, void * dirent,
 	if (!file)
 		goto out;
 
-	buf.current_dir = (struct irix_dirent32 *) dirent;
+	buf.current_dir = (struct irix_dirent32 __user *) dirent;
 	buf.previous = NULL;
 	buf.count = count;
 	buf.error = 0;
@@ -1870,8 +1846,8 @@ struct irix_dirent64 {
 };
 
 struct irix_dirent64_callback {
-	struct irix_dirent64 *curr;
-	struct irix_dirent64 *previous;
+	struct irix_dirent64 __user *curr;
+	struct irix_dirent64 __user *previous;
 	int count;
 	int error;
 };
@@ -1879,37 +1855,44 @@ struct irix_dirent64_callback {
 #define NAME_OFFSET64(de) ((int) ((de)->d_name - (char *) (de)))
 #define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1))
 
-static int irix_filldir64(void * __buf, const char * name, int namlen,
-			  loff_t offset, ino_t ino, unsigned int d_type)
+static int irix_filldir64(void *__buf, const char *name,
+	int namlen, loff_t offset, ino_t ino, unsigned int d_type)
 {
-	struct irix_dirent64 *dirent;
-	struct irix_dirent64_callback * buf =
-		(struct irix_dirent64_callback *) __buf;
+	struct irix_dirent64 __user *dirent;
+	struct irix_dirent64_callback * buf = __buf;
 	unsigned short reclen = ROUND_UP64(NAME_OFFSET64(dirent) + namlen + 1);
+	int err = 0;
 
-	buf->error = -EINVAL;	/* only used if we fail.. */
+	if (!access_ok(VERIFY_WRITE, buf, sizeof(*buf)))
+		return -EFAULT;
+
+	if (__put_user(-EINVAL, &buf->error))	/* only used if we fail.. */
+		return -EFAULT;
 	if (reclen > buf->count)
 		return -EINVAL;
 	dirent = buf->previous;
 	if (dirent)
-		__put_user(offset, &dirent->d_off);
+		err = __put_user(offset, &dirent->d_off);
 	dirent = buf->curr;
 	buf->previous = dirent;
-	__put_user(ino, &dirent->d_ino);
-	__put_user(reclen, &dirent->d_reclen);
-	__copy_to_user(dirent->d_name, name, namlen);
-	__put_user(0, &dirent->d_name[namlen]);
-	((char *) dirent) += reclen;
+	err |= __put_user(ino, &dirent->d_ino);
+	err |= __put_user(reclen, &dirent->d_reclen);
+	err |= __copy_to_user((char __user *)dirent->d_name, name, namlen)
+	       ? -EFAULT : 0;
+	err |= __put_user(0, &dirent->d_name[namlen]);
+
+	dirent = (struct irix_dirent64 __user *) ((char __user *) dirent + reclen);
+
 	buf->curr = dirent;
 	buf->count -= reclen;
 
-	return 0;
+	return err;
 }
 
-asmlinkage int irix_getdents64(int fd, void *dirent, int cnt)
+asmlinkage int irix_getdents64(int fd, void __user *dirent, int cnt)
 {
 	struct file *file;
-	struct irix_dirent64 *lastdirent;
+	struct irix_dirent64 __user *lastdirent;
 	struct irix_dirent64_callback buf;
 	int error;
 
@@ -1929,7 +1912,7 @@ asmlinkage int irix_getdents64(int fd, void *dirent, int cnt)
 	if (cnt < (sizeof(struct irix_dirent64) + 255))
 		goto out_f;
 
-	buf.curr = (struct irix_dirent64 *) dirent;
+	buf.curr = (struct irix_dirent64 __user *) dirent;
 	buf.previous = NULL;
 	buf.count = cnt;
 	buf.error = 0;
@@ -1941,7 +1924,8 @@ asmlinkage int irix_getdents64(int fd, void *dirent, int cnt)
 		error = buf.error;
 		goto out_f;
 	}
-	lastdirent->d_off = (u64) file->f_pos;
+	if (put_user(file->f_pos, &lastdirent->d_off))
+		return -EFAULT;
 #ifdef DEBUG_GETDENTS
 	printk("returning %d\n", cnt - buf.count);
 #endif
@@ -1953,10 +1937,10 @@ out:
 	return error;
 }
 
-asmlinkage int irix_ngetdents64(int fd, void *dirent, int cnt, int *eob)
+asmlinkage int irix_ngetdents64(int fd, void __user *dirent, int cnt, int *eob)
 {
 	struct file *file;
-	struct irix_dirent64 *lastdirent;
+	struct irix_dirent64 __user *lastdirent;
 	struct irix_dirent64_callback buf;
 	int error;
 
@@ -1978,7 +1962,7 @@ asmlinkage int irix_ngetdents64(int fd, void *dirent, int cnt, int *eob)
 		goto out_f;
 
 	*eob = 0;
-	buf.curr = (struct irix_dirent64 *) dirent;
+	buf.curr = (struct irix_dirent64 __user *) dirent;
 	buf.previous = NULL;
 	buf.count = cnt;
 	buf.error = 0;
@@ -1990,7 +1974,8 @@ asmlinkage int irix_ngetdents64(int fd, void *dirent, int cnt, int *eob)
 		error = buf.error;
 		goto out_f;
 	}
-	lastdirent->d_off = (u64) file->f_pos;
+	if (put_user(file->f_pos, &lastdirent->d_off))
+		return -EFAULT;
 #ifdef DEBUG_GETDENTS
 	printk("eob=%d returning %d\n", *eob, cnt - buf.count);
 #endif
@@ -2053,14 +2038,14 @@ out:
 	return retval;
 }
 
-asmlinkage int irix_utssys(char *inbuf, int arg, int type, char *outbuf)
+asmlinkage int irix_utssys(char __user *inbuf, int arg, int type, char __user *outbuf)
 {
 	int retval;
 
 	switch(type) {
 	case 0:
 		/* uname() */
-		retval = irix_uname((struct iuname *)inbuf);
+		retval = irix_uname((struct iuname __user *)inbuf);
 		goto out;
 
 	case 2:
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 0dd0df7a3b04..787ed541d442 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -11,6 +11,7 @@
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
+#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -25,6 +26,7 @@
 #include <linux/module.h>
 
 #include <asm/bootinfo.h>
+#include <asm/cache.h>
 #include <asm/compiler.h>
 #include <asm/cpu.h>
 #include <asm/cpu-features.h>
@@ -43,10 +45,6 @@
 
 #define TICK_SIZE	(tick_nsec / 1000)
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 /*
  * forward reference
  */
@@ -76,7 +74,7 @@ int (*rtc_set_mmss)(unsigned long);
 static unsigned int sll32_usecs_per_cycle;
 
 /* how many counter cycles in a jiffy */
-static unsigned long cycles_per_jiffy;
+static unsigned long cycles_per_jiffy __read_mostly;
 
 /* Cycle counter value at the previous timer interrupt.. */
 static unsigned int timerhi, timerlo;
@@ -98,7 +96,10 @@ static unsigned int null_hpt_read(void)
 	return 0;
 }
 
-static void null_hpt_init(unsigned int count) { /* nothing */ }
+static void null_hpt_init(unsigned int count)
+{
+	/* nothing */
+}
 
 
 /*
@@ -108,8 +109,10 @@ static void c0_timer_ack(void)
 {
 	unsigned int count;
 
+#ifndef CONFIG_SOC_PNX8550	/* pnx8550 resets to zero */
 	/* Ack this timer interrupt and set the next one.  */
 	expirelo += cycles_per_jiffy;
+#endif
 	write_c0_compare(expirelo);
 
 	/* Check to see if we have missed any timer interrupts.  */
@@ -224,7 +227,6 @@ int do_settimeofday(struct timespec *tv)
 	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
 	ntp_clear();
-
 	write_sequnlock_irq(&xtime_lock);
 	clock_was_set();
 	return 0;
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index a53b1ed7b386..6f3ff9690686 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -9,7 +9,7 @@
  * Copyright (C) 1999 Silicon Graphics, Inc.
  * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
  * Copyright (C) 2000, 01 MIPS Technologies, Inc.
- * Copyright (C) 2002, 2003, 2004  Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2004, 2005  Maciej W. Rozycki
  */
 #include <linux/config.h>
 #include <linux/init.h>
@@ -20,12 +20,16 @@
 #include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/kallsyms.h>
+#include <linux/bootmem.h>
 
 #include <asm/bootinfo.h>
 #include <asm/branch.h>
 #include <asm/break.h>
 #include <asm/cpu.h>
+#include <asm/dsp.h>
 #include <asm/fpu.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
 #include <asm/module.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
@@ -54,14 +58,19 @@ extern asmlinkage void handle_tr(void);
 extern asmlinkage void handle_fpe(void);
 extern asmlinkage void handle_mdmx(void);
 extern asmlinkage void handle_watch(void);
+extern asmlinkage void handle_mt(void);
+extern asmlinkage void handle_dsp(void);
 extern asmlinkage void handle_mcheck(void);
 extern asmlinkage void handle_reserved(void);
 
-extern int fpu_emulator_cop1Handler(int xcptno, struct pt_regs *xcp,
+extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
 	struct mips_fpu_soft_struct *ctx);
 
 void (*board_be_init)(void);
 int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
+void (*board_nmi_handler_setup)(void);
+void (*board_ejtag_handler_setup)(void);
+void (*board_bind_eic_interrupt)(int irq, int regset);
 
 /*
  * These constant is for searching for possible module text segments.
@@ -201,32 +210,47 @@ void show_regs(struct pt_regs *regs)
 
 	printk("Status: %08x    ", (uint32_t) regs->cp0_status);
 
-	if (regs->cp0_status & ST0_KX)
-		printk("KX ");
-	if (regs->cp0_status & ST0_SX)
-		printk("SX ");
-	if (regs->cp0_status & ST0_UX)
-		printk("UX ");
-	switch (regs->cp0_status & ST0_KSU) {
-	case KSU_USER:
-		printk("USER ");
-		break;
-	case KSU_SUPERVISOR:
-		printk("SUPERVISOR ");
-		break;
-	case KSU_KERNEL:
-		printk("KERNEL ");
-		break;
-	default:
-		printk("BAD_MODE ");
-		break;
+	if (current_cpu_data.isa_level == MIPS_CPU_ISA_I) {
+		if (regs->cp0_status & ST0_KUO)
+			printk("KUo ");
+		if (regs->cp0_status & ST0_IEO)
+			printk("IEo ");
+		if (regs->cp0_status & ST0_KUP)
+			printk("KUp ");
+		if (regs->cp0_status & ST0_IEP)
+			printk("IEp ");
+		if (regs->cp0_status & ST0_KUC)
+			printk("KUc ");
+		if (regs->cp0_status & ST0_IEC)
+			printk("IEc ");
+	} else {
+		if (regs->cp0_status & ST0_KX)
+			printk("KX ");
+		if (regs->cp0_status & ST0_SX)
+			printk("SX ");
+		if (regs->cp0_status & ST0_UX)
+			printk("UX ");
+		switch (regs->cp0_status & ST0_KSU) {
+		case KSU_USER:
+			printk("USER ");
+			break;
+		case KSU_SUPERVISOR:
+			printk("SUPERVISOR ");
+			break;
+		case KSU_KERNEL:
+			printk("KERNEL ");
+			break;
+		default:
+			printk("BAD_MODE ");
+			break;
+		}
+		if (regs->cp0_status & ST0_ERL)
+			printk("ERL ");
+		if (regs->cp0_status & ST0_EXL)
+			printk("EXL ");
+		if (regs->cp0_status & ST0_IE)
+			printk("IE ");
 	}
-	if (regs->cp0_status & ST0_ERL)
-		printk("ERL ");
-	if (regs->cp0_status & ST0_EXL)
-		printk("EXL ");
-	if (regs->cp0_status & ST0_IE)
-		printk("IE ");
 	printk("\n");
 
 	printk("Cause : %08x\n", cause);
@@ -252,29 +276,18 @@ void show_registers(struct pt_regs *regs)
 
 static DEFINE_SPINLOCK(die_lock);
 
-NORET_TYPE void __die(const char * str, struct pt_regs * regs,
-	const char * file, const char * func, unsigned long line)
+NORET_TYPE void ATTRIB_NORET die(const char * str, struct pt_regs * regs)
 {
 	static int die_counter;
 
 	console_verbose();
 	spin_lock_irq(&die_lock);
-	printk("%s", str);
-	if (file && func)
-		printk(" in %s:%s, line %ld", file, func, line);
-	printk("[#%d]:\n", ++die_counter);
+	printk("%s[#%d]:\n", str, ++die_counter);
 	show_registers(regs);
 	spin_unlock_irq(&die_lock);
 	do_exit(SIGSEGV);
 }
 
-void __die_if_kernel(const char * str, struct pt_regs * regs,
-		     const char * file, const char * func, unsigned long line)
-{
-	if (!user_mode(regs))
-		__die(str, regs, file, func, line);
-}
-
 extern const struct exception_table_entry __start___dbe_table[];
 extern const struct exception_table_entry __stop___dbe_table[];
 
@@ -339,9 +352,9 @@ asmlinkage void do_be(struct pt_regs *regs)
 
 static inline int get_insn_opcode(struct pt_regs *regs, unsigned int *opcode)
 {
-	unsigned int *epc;
+	unsigned int __user *epc;
 
-	epc = (unsigned int *) regs->cp0_epc +
+	epc = (unsigned int __user *) regs->cp0_epc +
 	      ((regs->cp0_cause & CAUSEF_BD) != 0);
 	if (!get_user(*opcode, epc))
 		return 0;
@@ -360,6 +373,10 @@ static inline int get_insn_opcode(struct pt_regs *regs, unsigned int *opcode)
 #define OFFSET 0x0000ffff
 #define LL     0xc0000000
 #define SC     0xe0000000
+#define SPEC3  0x7c000000
+#define RD     0x0000f800
+#define FUNC   0x0000003f
+#define RDHWR  0x0000003b
 
 /*
  * The ll_bit is cleared by r*_switch.S
@@ -371,7 +388,7 @@ static struct task_struct *ll_task = NULL;
 
 static inline void simulate_ll(struct pt_regs *regs, unsigned int opcode)
 {
-	unsigned long value, *vaddr;
+	unsigned long value, __user *vaddr;
 	long offset;
 	int signal = 0;
 
@@ -385,7 +402,8 @@ static inline void simulate_ll(struct pt_regs *regs, unsigned int opcode)
 	offset <<= 16;
 	offset >>= 16;
 
-	vaddr = (unsigned long *)((long)(regs->regs[(opcode & BASE) >> 21]) + offset);
+	vaddr = (unsigned long __user *)
+	        ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
 
 	if ((unsigned long)vaddr & 3) {
 		signal = SIGBUS;
@@ -407,9 +425,10 @@ static inline void simulate_ll(struct pt_regs *regs, unsigned int opcode)
 
 	preempt_enable();
 
+	compute_return_epc(regs);
+
 	regs->regs[(opcode & RT) >> 16] = value;
 
-	compute_return_epc(regs);
 	return;
 
 sig:
@@ -418,7 +437,8 @@ sig:
 
 static inline void simulate_sc(struct pt_regs *regs, unsigned int opcode)
 {
-	unsigned long *vaddr, reg;
+	unsigned long __user *vaddr;
+	unsigned long reg;
 	long offset;
 	int signal = 0;
 
@@ -432,7 +452,8 @@ static inline void simulate_sc(struct pt_regs *regs, unsigned int opcode)
 	offset <<= 16;
 	offset >>= 16;
 
-	vaddr = (unsigned long *)((long)(regs->regs[(opcode & BASE) >> 21]) + offset);
+	vaddr = (unsigned long __user *)
+	        ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
 	reg = (opcode & RT) >> 16;
 
 	if ((unsigned long)vaddr & 3) {
@@ -443,9 +464,9 @@ static inline void simulate_sc(struct pt_regs *regs, unsigned int opcode)
 	preempt_disable();
 
 	if (ll_bit == 0 || ll_task != current) {
+		compute_return_epc(regs);
 		regs->regs[reg] = 0;
 		preempt_enable();
-		compute_return_epc(regs);
 		return;
 	}
 
@@ -456,9 +477,9 @@ static inline void simulate_sc(struct pt_regs *regs, unsigned int opcode)
 		goto sig;
 	}
 
+	compute_return_epc(regs);
 	regs->regs[reg] = 1;
 
-	compute_return_epc(regs);
 	return;
 
 sig:
@@ -491,6 +512,37 @@ static inline int simulate_llsc(struct pt_regs *regs)
 	return -EFAULT;			/* Strange things going on ... */
 }
 
+/*
+ * Simulate trapping 'rdhwr' instructions to provide user accessible
+ * registers not implemented in hardware.  The only current use of this
+ * is the thread area pointer.
+ */
+static inline int simulate_rdhwr(struct pt_regs *regs)
+{
+	struct thread_info *ti = current->thread_info;
+	unsigned int opcode;
+
+	if (unlikely(get_insn_opcode(regs, &opcode)))
+		return -EFAULT;
+
+	if (unlikely(compute_return_epc(regs)))
+		return -EFAULT;
+
+	if ((opcode & OPCODE) == SPEC3 && (opcode & FUNC) == RDHWR) {
+		int rd = (opcode & RD) >> 11;
+		int rt = (opcode & RT) >> 16;
+		switch (rd) {
+			case 29:
+				regs->regs[rt] = ti->tp_value;
+				break;
+			default:
+				return -EFAULT;
+		}
+	}
+
+	return 0;
+}
+
 asmlinkage void do_ov(struct pt_regs *regs)
 {
 	siginfo_t info;
@@ -498,7 +550,7 @@ asmlinkage void do_ov(struct pt_regs *regs)
 	info.si_code = FPE_INTOVF;
 	info.si_signo = SIGFPE;
 	info.si_errno = 0;
-	info.si_addr = (void *)regs->cp0_epc;
+	info.si_addr = (void __user *) regs->cp0_epc;
 	force_sig_info(SIGFPE, &info, current);
 }
 
@@ -512,6 +564,14 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 
 		preempt_disable();
 
+#ifdef CONFIG_PREEMPT
+		if (!is_fpu_owner()) {
+			/* We might lose fpu before disabling preempt... */
+			own_fpu();
+			BUG_ON(!used_math());
+			restore_fp(current);
+		}
+#endif
 		/*
 	 	 * Unimplemented operation exception.  If we've got the full
 		 * software emulator on-board, let's use it...
@@ -523,11 +583,18 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 		 * a bit extreme for what should be an infrequent event.
 		 */
 		save_fp(current);
+		/* Ensure 'resume' not overwrite saved fp context again. */
+		lose_fpu();
+
+		preempt_enable();
 
 		/* Run the emulator */
-		sig = fpu_emulator_cop1Handler (0, regs,
+		sig = fpu_emulator_cop1Handler (regs,
 			&current->thread.fpu.soft);
 
+		preempt_disable();
+
+		own_fpu();	/* Using the FPU again.  */
 		/*
 		 * We can't allow the emulated instruction to leave any of
 		 * the cause bit set in $fcr31.
@@ -584,7 +651,7 @@ asmlinkage void do_bp(struct pt_regs *regs)
 			info.si_code = FPE_INTOVF;
 		info.si_signo = SIGFPE;
 		info.si_errno = 0;
-		info.si_addr = (void *)regs->cp0_epc;
+		info.si_addr = (void __user *) regs->cp0_epc;
 		force_sig_info(SIGFPE, &info, current);
 		break;
 	default:
@@ -621,7 +688,7 @@ asmlinkage void do_tr(struct pt_regs *regs)
 			info.si_code = FPE_INTOVF;
 		info.si_signo = SIGFPE;
 		info.si_errno = 0;
-		info.si_addr = (void *)regs->cp0_epc;
+		info.si_addr = (void __user *) regs->cp0_epc;
 		force_sig_info(SIGFPE, &info, current);
 		break;
 	default:
@@ -637,6 +704,9 @@ asmlinkage void do_ri(struct pt_regs *regs)
 		if (!simulate_llsc(regs))
 			return;
 
+	if (!simulate_rdhwr(regs))
+		return;
+
 	force_sig(SIGILL, current);
 }
 
@@ -650,11 +720,13 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 
 	switch (cpid) {
 	case 0:
-		if (cpu_has_llsc)
-			break;
+		if (!cpu_has_llsc)
+			if (!simulate_llsc(regs))
+				return;
 
-		if (!simulate_llsc(regs))
+		if (!simulate_rdhwr(regs))
 			return;
+
 		break;
 
 	case 1:
@@ -668,15 +740,15 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 			set_used_math();
 		}
 
+		preempt_enable();
+
 		if (!cpu_has_fpu) {
-			int sig = fpu_emulator_cop1Handler(0, regs,
+			int sig = fpu_emulator_cop1Handler(regs,
 						&current->thread.fpu.soft);
 			if (sig)
 				force_sig(sig, current);
 		}
 
-		preempt_enable();
-
 		return;
 
 	case 2:
@@ -716,6 +788,22 @@ asmlinkage void do_mcheck(struct pt_regs *regs)
 	      (regs->cp0_status & ST0_TS) ? "" : "not ");
 }
 
+asmlinkage void do_mt(struct pt_regs *regs)
+{
+	die_if_kernel("MIPS MT Thread exception in kernel", regs);
+
+	force_sig(SIGILL, current);
+}
+
+
+asmlinkage void do_dsp(struct pt_regs *regs)
+{
+	if (cpu_has_dsp)
+		panic("Unexpected DSP exception\n");
+
+	force_sig(SIGILL, current);
+}
+
 asmlinkage void do_reserved(struct pt_regs *regs)
 {
 	/*
@@ -728,6 +816,12 @@ asmlinkage void do_reserved(struct pt_regs *regs)
 	      (regs->cp0_cause & 0x7f) >> 2);
 }
 
+asmlinkage void do_default_vi(struct pt_regs *regs)
+{
+	show_regs(regs);
+	panic("Caught unexpected vectored interrupt.");
+}
+
 /*
  * Some MIPS CPUs can enable/disable for cache parity detection, but do
  * it different ways.
@@ -736,16 +830,12 @@ static inline void parity_protection_init(void)
 {
 	switch (current_cpu_data.cputype) {
 	case CPU_24K:
-		/* 24K cache parity not currently implemented in FPGA */
-		printk(KERN_INFO "Disable cache parity protection for "
-		       "MIPS 24K CPU.\n");
-		write_c0_ecc(read_c0_ecc() & ~0x80000000);
-		break;
 	case CPU_5KC:
-		/* Set the PE bit (bit 31) in the c0_ecc register. */
-		printk(KERN_INFO "Enable cache parity protection for "
-		       "MIPS 5KC/24K CPUs.\n");
-		write_c0_ecc(read_c0_ecc() | 0x80000000);
+		write_c0_ecc(0x80000000);
+		back_to_back_c0_hazard();
+		/* Set the PE bit (bit 31) in the c0_errctl register. */
+		printk(KERN_INFO "Cache parity protection %sabled\n",
+		       (read_c0_ecc() & 0x80000000) ? "en" : "dis");
 		break;
 	case CPU_20KC:
 	case CPU_25KF:
@@ -783,7 +873,7 @@ asmlinkage void cache_parity_error(void)
 	       reg_val & (1<<22) ? "E0 " : "");
 	printk("IDX: 0x%08x\n", reg_val & ((1<<22)-1));
 
-#if defined(CONFIG_CPU_MIPS32) || defined (CONFIG_CPU_MIPS64)
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
 	if (reg_val & (1<<22))
 		printk("DErrAddr0: 0x%0*lx\n", field, read_c0_derraddr0());
 
@@ -840,7 +930,11 @@ void nmi_exception_handler(struct pt_regs *regs)
 	while(1) ;
 }
 
+#define VECTORSPACING 0x100	/* for EI/VI mode */
+
+unsigned long ebase;
 unsigned long exception_handlers[32];
+unsigned long vi_handlers[64];
 
 /*
  * As a side effect of the way this is implemented we're limited
@@ -854,13 +948,156 @@ void *set_except_vector(int n, void *addr)
 
 	exception_handlers[n] = handler;
 	if (n == 0 && cpu_has_divec) {
-		*(volatile u32 *)(CAC_BASE + 0x200) = 0x08000000 |
+		*(volatile u32 *)(ebase + 0x200) = 0x08000000 |
 		                                 (0x03ffffff & (handler >> 2));
-		flush_icache_range(CAC_BASE + 0x200, CAC_BASE + 0x204);
+		flush_icache_range(ebase + 0x200, ebase + 0x204);
 	}
 	return (void *)old_handler;
 }
 
+#ifdef CONFIG_CPU_MIPSR2
+/*
+ * Shadow register allocation
+ * FIXME: SMP...
+ */
+
+/* MIPSR2 shadow register sets */
+struct shadow_registers {
+	spinlock_t sr_lock;	/*  */
+	int sr_supported;	/* Number of shadow register sets supported */
+	int sr_allocated;	/* Bitmap of allocated shadow registers */
+} shadow_registers;
+
+void mips_srs_init(void)
+{
+#ifdef CONFIG_CPU_MIPSR2_SRS
+	shadow_registers.sr_supported = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
+	printk ("%d MIPSR2 register sets available\n", shadow_registers.sr_supported);
+#else
+	shadow_registers.sr_supported = 1;
+#endif
+	shadow_registers.sr_allocated = 1;	/* Set 0 used by kernel */
+	spin_lock_init(&shadow_registers.sr_lock);
+}
+
+int mips_srs_max(void)
+{
+	return shadow_registers.sr_supported;
+}
+
+int mips_srs_alloc (void)
+{
+	struct shadow_registers *sr = &shadow_registers;
+	unsigned long flags;
+	int set;
+
+	spin_lock_irqsave(&sr->sr_lock, flags);
+
+	for (set = 0; set < sr->sr_supported; set++) {
+		if ((sr->sr_allocated & (1 << set)) == 0) {
+			sr->sr_allocated |= 1 << set;
+			spin_unlock_irqrestore(&sr->sr_lock, flags);
+			return set;
+		}
+	}
+
+	/* None available */
+	spin_unlock_irqrestore(&sr->sr_lock, flags);
+	return -1;
+}
+
+void mips_srs_free (int set)
+{
+	struct shadow_registers *sr = &shadow_registers;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sr->sr_lock, flags);
+	sr->sr_allocated &= ~(1 << set);
+	spin_unlock_irqrestore(&sr->sr_lock, flags);
+}
+
+void *set_vi_srs_handler (int n, void *addr, int srs)
+{
+	unsigned long handler;
+	unsigned long old_handler = vi_handlers[n];
+	u32 *w;
+	unsigned char *b;
+
+	if (!cpu_has_veic && !cpu_has_vint)
+		BUG();
+
+	if (addr == NULL) {
+		handler = (unsigned long) do_default_vi;
+		srs = 0;
+	}
+	else
+		handler = (unsigned long) addr;
+	vi_handlers[n] = (unsigned long) addr;
+
+	b = (unsigned char *)(ebase + 0x200 + n*VECTORSPACING);
+
+	if (srs >= mips_srs_max())
+		panic("Shadow register set %d not supported", srs);
+
+	if (cpu_has_veic) {
+		if (board_bind_eic_interrupt)
+			board_bind_eic_interrupt (n, srs);
+	}
+	else if (cpu_has_vint) {
+		/* SRSMap is only defined if shadow sets are implemented */
+		if (mips_srs_max() > 1)
+			change_c0_srsmap (0xf << n*4, srs << n*4);
+	}
+
+	if (srs == 0) {
+		/*
+		 * If no shadow set is selected then use the default handler
+		 * that does normal register saving and a standard interrupt exit
+		 */
+
+		extern char except_vec_vi, except_vec_vi_lui;
+		extern char except_vec_vi_ori, except_vec_vi_end;
+		const int handler_len = &except_vec_vi_end - &except_vec_vi;
+		const int lui_offset = &except_vec_vi_lui - &except_vec_vi;
+		const int ori_offset = &except_vec_vi_ori - &except_vec_vi;
+
+		if (handler_len > VECTORSPACING) {
+			/*
+			 * Sigh... panicing won't help as the console
+			 * is probably not configured :(
+			 */
+			panic ("VECTORSPACING too small");
+		}
+
+		memcpy (b, &except_vec_vi, handler_len);
+		w = (u32 *)(b + lui_offset);
+		*w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff);
+		w = (u32 *)(b + ori_offset);
+		*w = (*w & 0xffff0000) | ((u32)handler & 0xffff);
+		flush_icache_range((unsigned long)b, (unsigned long)(b+handler_len));
+	}
+	else {
+		/*
+		 * In other cases jump directly to the interrupt handler
+		 *
+		 * It is the handlers responsibility to save registers if required
+		 * (eg hi/lo) and return from the exception using "eret"
+		 */
+		w = (u32 *)b;
+		*w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */
+		*w = 0;
+		flush_icache_range((unsigned long)b, (unsigned long)(b+8));
+	}
+
+	return (void *)old_handler;
+}
+
+void *set_vi_handler (int n, void *addr)
+{
+	return set_vi_srs_handler (n, addr, 0);
+}
+#endif
+
 /*
  * This is used by native signal handling
  */
@@ -912,6 +1149,7 @@ static inline void signal32_init(void)
 
 extern void cpu_cache_init(void);
 extern void tlb_init(void);
+extern void flush_tlb_handlers(void);
 
 void __init per_cpu_trap_init(void)
 {
@@ -929,15 +1167,32 @@ void __init per_cpu_trap_init(void)
 #endif
 	if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV)
 		status_set |= ST0_XX;
-	change_c0_status(ST0_CU|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
+	change_c0_status(ST0_CU|ST0_MX|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
 			 status_set);
 
+	if (cpu_has_dsp)
+		set_c0_status(ST0_MX);
+
+#ifdef CONFIG_CPU_MIPSR2
+	write_c0_hwrena (0x0000000f); /* Allow rdhwr to all registers */
+#endif
+
 	/*
-	 * Some MIPS CPUs have a dedicated interrupt vector which reduces the
-	 * interrupt processing overhead.  Use it where available.
+	 * Interrupt handling.
 	 */
-	if (cpu_has_divec)
-		set_c0_cause(CAUSEF_IV);
+	if (cpu_has_veic || cpu_has_vint) {
+		write_c0_ebase (ebase);
+		/* Setting vector spacing enables EI/VI mode  */
+		change_c0_intctl (0x3e0, VECTORSPACING);
+	}
+	if (cpu_has_divec) {
+		if (cpu_has_mipsmt) {
+			unsigned int vpflags = dvpe();
+			set_c0_cause(CAUSEF_IV);
+			evpe(vpflags);
+		} else
+			set_c0_cause(CAUSEF_IV);
+	}
 
 	cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
 	TLBMISS_HANDLER_SETUP();
@@ -951,13 +1206,41 @@ void __init per_cpu_trap_init(void)
 	tlb_init();
 }
 
+/* Install CPU exception handler */
+void __init set_handler (unsigned long offset, void *addr, unsigned long size)
+{
+	memcpy((void *)(ebase + offset), addr, size);
+	flush_icache_range(ebase + offset, ebase + offset + size);
+}
+
+/* Install uncached CPU exception handler */
+void __init set_uncached_handler (unsigned long offset, void *addr, unsigned long size)
+{
+#ifdef CONFIG_32BIT
+	unsigned long uncached_ebase = KSEG1ADDR(ebase);
+#endif
+#ifdef CONFIG_64BIT
+	unsigned long uncached_ebase = TO_UNCAC(ebase);
+#endif
+
+	memcpy((void *)(uncached_ebase + offset), addr, size);
+}
+
 void __init trap_init(void)
 {
 	extern char except_vec3_generic, except_vec3_r4000;
-	extern char except_vec_ejtag_debug;
 	extern char except_vec4;
 	unsigned long i;
 
+	if (cpu_has_veic || cpu_has_vint)
+		ebase = (unsigned long) alloc_bootmem_low_pages (0x200 + VECTORSPACING*64);
+	else
+		ebase = CAC_BASE;
+
+#ifdef CONFIG_CPU_MIPSR2
+	mips_srs_init();
+#endif
+
 	per_cpu_trap_init();
 
 	/*
@@ -965,7 +1248,7 @@ void __init trap_init(void)
 	 * This will be overriden later as suitable for a particular
 	 * configuration.
 	 */
-	memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80);
+	set_handler(0x180, &except_vec3_generic, 0x80);
 
 	/*
 	 * Setup default vectors
@@ -977,8 +1260,8 @@ void __init trap_init(void)
 	 * Copy the EJTAG debug exception vector handler code to it's final
 	 * destination.
 	 */
-	if (cpu_has_ejtag)
-		memcpy((void *)(CAC_BASE + 0x300), &except_vec_ejtag_debug, 0x80);
+	if (cpu_has_ejtag && board_ejtag_handler_setup)
+		board_ejtag_handler_setup ();
 
 	/*
 	 * Only some CPUs have the watch exceptions.
@@ -987,11 +1270,15 @@ void __init trap_init(void)
 		set_except_vector(23, handle_watch);
 
 	/*
-	 * Some MIPS CPUs have a dedicated interrupt vector which reduces the
-	 * interrupt processing overhead.  Use it where available.
+	 * Initialise interrupt handlers
 	 */
-	if (cpu_has_divec)
-		memcpy((void *)(CAC_BASE + 0x200), &except_vec4, 0x8);
+	if (cpu_has_veic || cpu_has_vint) {
+		int nvec = cpu_has_veic ? 64 : 8;
+		for (i = 0; i < nvec; i++)
+			set_vi_handler (i, NULL);
+	}
+	else if (cpu_has_divec)
+		set_handler(0x200, &except_vec4, 0x8);
 
 	/*
 	 * Some CPUs can enable/disable for cache parity detection, but does
@@ -1023,21 +1310,6 @@ void __init trap_init(void)
 	set_except_vector(11, handle_cpu);
 	set_except_vector(12, handle_ov);
 	set_except_vector(13, handle_tr);
-	set_except_vector(22, handle_mdmx);
-
-	if (cpu_has_fpu && !cpu_has_nofpuex)
-		set_except_vector(15, handle_fpe);
-
-	if (cpu_has_mcheck)
-		set_except_vector(24, handle_mcheck);
-
-	if (cpu_has_vce)
-		/* Special exception: R4[04]00 uses also the divec space. */
-		memcpy((void *)(CAC_BASE + 0x180), &except_vec3_r4000, 0x100);
-	else if (cpu_has_4kex)
-		memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80);
-	else
-		memcpy((void *)(CAC_BASE + 0x080), &except_vec3_generic, 0x80);
 
 	if (current_cpu_data.cputype == CPU_R6000 ||
 	    current_cpu_data.cputype == CPU_R6000A) {
@@ -1053,10 +1325,37 @@ void __init trap_init(void)
 		//set_except_vector(15, handle_ndc);
 	}
 
+
+	if (board_nmi_handler_setup)
+		board_nmi_handler_setup();
+
+	if (cpu_has_fpu && !cpu_has_nofpuex)
+		set_except_vector(15, handle_fpe);
+
+	set_except_vector(22, handle_mdmx);
+
+	if (cpu_has_mcheck)
+		set_except_vector(24, handle_mcheck);
+
+	if (cpu_has_mipsmt)
+		set_except_vector(25, handle_mt);
+
+	if (cpu_has_dsp)
+		set_except_vector(26, handle_dsp);
+
+	if (cpu_has_vce)
+		/* Special exception: R4[04]00 uses also the divec space. */
+		memcpy((void *)(CAC_BASE + 0x180), &except_vec3_r4000, 0x100);
+	else if (cpu_has_4kex)
+		memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80);
+	else
+		memcpy((void *)(CAC_BASE + 0x080), &except_vec3_generic, 0x80);
+
 	signal_init();
 #ifdef CONFIG_MIPS32_COMPAT
 	signal32_init();
 #endif
 
-	flush_icache_range(CAC_BASE, CAC_BASE + 0x400);
+	flush_icache_range(ebase, ebase + 0x400);
+	flush_tlb_handlers();
 }
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index 36c5212e0928..5b5a3736cbbc 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -94,7 +94,7 @@ unsigned long unaligned_instructions;
 #endif
 
 static inline int emulate_load_store_insn(struct pt_regs *regs,
-	void *addr, unsigned long pc,
+	void __user *addr, unsigned int __user *pc,
 	unsigned long **regptr, unsigned long *newvalue)
 {
 	union mips_instruction insn;
@@ -107,7 +107,7 @@ static inline int emulate_load_store_insn(struct pt_regs *regs,
 	/*
 	 * This load never faults.
 	 */
-	__get_user(insn.word, (unsigned int *)pc);
+	__get_user(insn.word, pc);
 
 	switch (insn.i_format.opcode) {
 	/*
@@ -494,8 +494,8 @@ asmlinkage void do_ade(struct pt_regs *regs)
 {
 	unsigned long *regptr, newval;
 	extern int do_dsemulret(struct pt_regs *);
+	unsigned int __user *pc;
 	mm_segment_t seg;
-	unsigned long pc;
 
 	/*
 	 * Address errors may be deliberately induced by the FPU emulator to
@@ -515,7 +515,7 @@ asmlinkage void do_ade(struct pt_regs *regs)
 	if ((regs->cp0_badvaddr == regs->cp0_epc) || (regs->cp0_epc & 0x1))
 		goto sigbus;
 
-	pc = exception_epc(regs);
+	pc = (unsigned int __user *) exception_epc(regs);
 	if ((current->thread.mflags & MF_FIXADE) == 0)
 		goto sigbus;
 
@@ -526,7 +526,7 @@ asmlinkage void do_ade(struct pt_regs *regs)
 	seg = get_fs();
 	if (!user_mode(regs))
 		set_fs(KERNEL_DS);
-	if (!emulate_load_store_insn(regs, (void *)regs->cp0_badvaddr, pc,
+	if (!emulate_load_store_insn(regs, (void __user *)regs->cp0_badvaddr, pc,
 	                             &regptr, &newval)) {
 		compute_return_epc(regs);
 		/*
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 482ac310c937..25cc856d8e7e 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -54,13 +54,6 @@ SECTIONS
 
     *(.data)
 
-   /* Align the initial ramdisk image (INITRD) on page boundaries. */
-   . = ALIGN(4096);
-   __rd_start = .;
-   *(.initrd)
-   . = ALIGN(4096);
-   __rd_end = .;
-
     CONSTRUCTORS
   }
   _gp = . + 0x8000;
@@ -96,12 +89,6 @@ SECTIONS
   .init.setup : { *(.init.setup) }
   __setup_end = .;
 
-  .early_initcall.init : {
-  __earlyinitcall_start = .;
-	*(.initcall.early1.init)
-  }
-  __earlyinitcall_end = .;
-
   __initcall_start = .;
   .initcall.init : {
 	*(.initcall1.init)
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
new file mode 100644
index 000000000000..97fefcc9dbe7
--- /dev/null
+++ b/arch/mips/kernel/vpe.c
@@ -0,0 +1,1296 @@
+/*
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+/*
+ * VPE support module
+ *
+ * Provides support for loading a MIPS SP program on VPE1.
+ * The SP enviroment is rather simple, no tlb's.  It needs to be relocatable
+ * (or partially linked). You should initialise your stack in the startup
+ * code. This loader looks for the symbol __start and sets up
+ * execution to resume from there. The MIPS SDE kit contains suitable examples.
+ *
+ * To load and run, simply cat a SP 'program file' to /dev/vpe1.
+ * i.e cat spapp >/dev/vpe1.
+ *
+ * You'll need to have the following device files.
+ * mknod /dev/vpe0 c 63 0
+ * mknod /dev/vpe1 c 63 1
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/vmalloc.h>
+#include <linux/elf.h>
+#include <linux/seq_file.h>
+#include <linux/syscalls.h>
+#include <linux/moduleloader.h>
+#include <linux/interrupt.h>
+#include <linux/poll.h>
+#include <linux/bootmem.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/cacheflush.h>
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+
+typedef void *vpe_handle;
+
+// defined here because the kernel module loader doesn't have
+// anything to do with it.
+#define SHN_MIPS_SCOMMON 0xff03
+
+#ifndef ARCH_SHF_SMALL
+#define ARCH_SHF_SMALL 0
+#endif
+
+/* If this is set, the section belongs in the init part of the module */
+#define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
+
+// temp number,
+#define VPE_MAJOR 63
+
+static char module_name[] = "vpe";
+static int major = 0;
+
+/* grab the likely amount of memory we will need. */
+#ifdef CONFIG_MIPS_VPE_LOADER_TOM
+#define P_SIZE (2 * 1024 * 1024)
+#else
+/* add an overhead to the max kmalloc size for non-striped symbols/etc */
+#define P_SIZE (256 * 1024)
+#endif
+
+#define MAX_VPES 16
+
+enum vpe_state {
+	VPE_STATE_UNUSED = 0,
+	VPE_STATE_INUSE,
+	VPE_STATE_RUNNING
+};
+
+enum tc_state {
+	TC_STATE_UNUSED = 0,
+	TC_STATE_INUSE,
+	TC_STATE_RUNNING,
+	TC_STATE_DYNAMIC
+};
+
+struct vpe;
+typedef struct tc {
+	enum tc_state state;
+	int index;
+
+	/* parent VPE */
+	struct vpe *pvpe;
+
+	/* The list of TC's with this VPE */
+	struct list_head tc;
+
+	/* The global list of tc's */
+	struct list_head list;
+} tc_t;
+
+typedef struct vpe {
+	enum vpe_state state;
+
+	/* (device) minor associated with this vpe */
+	int minor;
+
+	/* elfloader stuff */
+	void *load_addr;
+	u32 len;
+	char *pbuffer;
+	u32 plen;
+
+	unsigned long __start;
+
+	/* tc's associated with this vpe */
+	struct list_head tc;
+
+	/* The list of vpe's */
+	struct list_head list;
+
+	/* shared symbol address */
+	void *shared_ptr;
+} vpe_t;
+
+struct vpecontrol_ {
+	/* Virtual processing elements */
+	struct list_head vpe_list;
+
+	/* Thread contexts */
+	struct list_head tc_list;
+} vpecontrol;
+
+static void release_progmem(void *ptr);
+static void dump_vpe(vpe_t * v);
+extern void save_gp_address(unsigned int secbase, unsigned int rel);
+
+/* get the vpe associated with this minor */
+struct vpe *get_vpe(int minor)
+{
+	struct vpe *v;
+
+	list_for_each_entry(v, &vpecontrol.vpe_list, list) {
+		if (v->minor == minor)
+			return v;
+	}
+
+	printk(KERN_DEBUG "VPE: get_vpe minor %d not found\n", minor);
+	return NULL;
+}
+
+/* get the vpe associated with this minor */
+struct tc *get_tc(int index)
+{
+	struct tc *t;
+
+	list_for_each_entry(t, &vpecontrol.tc_list, list) {
+		if (t->index == index)
+			return t;
+	}
+
+	printk(KERN_DEBUG "VPE: get_tc index %d not found\n", index);
+
+	return NULL;
+}
+
+struct tc *get_tc_unused(void)
+{
+	struct tc *t;
+
+	list_for_each_entry(t, &vpecontrol.tc_list, list) {
+		if (t->state == TC_STATE_UNUSED)
+			return t;
+	}
+
+	printk(KERN_DEBUG "VPE: All TC's are in use\n");
+
+	return NULL;
+}
+
+/* allocate a vpe and associate it with this minor (or index) */
+struct vpe *alloc_vpe(int minor)
+{
+	struct vpe *v;
+
+	if ((v = kmalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) {
+		printk(KERN_WARNING "VPE: alloc_vpe no mem\n");
+		return NULL;
+	}
+
+	memset(v, 0, sizeof(struct vpe));
+
+	INIT_LIST_HEAD(&v->tc);
+	list_add_tail(&v->list, &vpecontrol.vpe_list);
+
+	v->minor = minor;
+	return v;
+}
+
+/* allocate a tc. At startup only tc0 is running, all other can be halted. */
+struct tc *alloc_tc(int index)
+{
+	struct tc *t;
+
+	if ((t = kmalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) {
+		printk(KERN_WARNING "VPE: alloc_tc no mem\n");
+		return NULL;
+	}
+
+	memset(t, 0, sizeof(struct tc));
+
+	INIT_LIST_HEAD(&t->tc);
+	list_add_tail(&t->list, &vpecontrol.tc_list);
+
+	t->index = index;
+
+	return t;
+}
+
+/* clean up and free everything */
+void release_vpe(struct vpe *v)
+{
+	list_del(&v->list);
+	if (v->load_addr)
+		release_progmem(v);
+	kfree(v);
+}
+
+void dump_mtregs(void)
+{
+	unsigned long val;
+
+	val = read_c0_config3();
+	printk("config3 0x%lx MT %ld\n", val,
+	       (val & CONFIG3_MT) >> CONFIG3_MT_SHIFT);
+
+	val = read_c0_mvpconf0();
+	printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val,
+	       (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT,
+	       val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT);
+
+	val = read_c0_mvpcontrol();
+	printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val,
+	       (val & MVPCONTROL_STLB) >> MVPCONTROL_STLB_SHIFT,
+	       (val & MVPCONTROL_VPC) >> MVPCONTROL_VPC_SHIFT,
+	       (val & MVPCONTROL_EVP));
+
+	val = read_c0_vpeconf0();
+	printk("VPEConf0 0x%lx MVP %ld\n", val,
+	       (val & VPECONF0_MVP) >> VPECONF0_MVP_SHIFT);
+}
+
+/* Find some VPE program space  */
+static void *alloc_progmem(u32 len)
+{
+#ifdef CONFIG_MIPS_VPE_LOADER_TOM
+	/* this means you must tell linux to use less memory than you physically have */
+	return (void *)((max_pfn * PAGE_SIZE) + KSEG0);
+#else
+	// simple grab some mem for now
+	return kmalloc(len, GFP_KERNEL);
+#endif
+}
+
+static void release_progmem(void *ptr)
+{
+#ifndef CONFIG_MIPS_VPE_LOADER_TOM
+	kfree(ptr);
+#endif
+}
+
+/* Update size with this section: return offset. */
+static long get_offset(unsigned long *size, Elf_Shdr * sechdr)
+{
+	long ret;
+
+	ret = ALIGN(*size, sechdr->sh_addralign ? : 1);
+	*size = ret + sechdr->sh_size;
+	return ret;
+}
+
+/* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld
+   might -- code, read-only data, read-write data, small data.  Tally
+   sizes, and place the offsets into sh_entsize fields: high bit means it
+   belongs in init. */
+static void layout_sections(struct module *mod, const Elf_Ehdr * hdr,
+			    Elf_Shdr * sechdrs, const char *secstrings)
+{
+	static unsigned long const masks[][2] = {
+		/* NOTE: all executable code must be the first section
+		 * in this array; otherwise modify the text_size
+		 * finder in the two loops below */
+		{SHF_EXECINSTR | SHF_ALLOC, ARCH_SHF_SMALL},
+		{SHF_ALLOC, SHF_WRITE | ARCH_SHF_SMALL},
+		{SHF_WRITE | SHF_ALLOC, ARCH_SHF_SMALL},
+		{ARCH_SHF_SMALL | SHF_ALLOC, 0}
+	};
+	unsigned int m, i;
+
+	for (i = 0; i < hdr->e_shnum; i++)
+		sechdrs[i].sh_entsize = ~0UL;
+
+	for (m = 0; m < ARRAY_SIZE(masks); ++m) {
+		for (i = 0; i < hdr->e_shnum; ++i) {
+			Elf_Shdr *s = &sechdrs[i];
+
+			//  || strncmp(secstrings + s->sh_name, ".init", 5) == 0)
+			if ((s->sh_flags & masks[m][0]) != masks[m][0]
+			    || (s->sh_flags & masks[m][1])
+			    || s->sh_entsize != ~0UL)
+				continue;
+			s->sh_entsize = get_offset(&mod->core_size, s);
+		}
+
+		if (m == 0)
+			mod->core_text_size = mod->core_size;
+
+	}
+}
+
+
+/* from module-elf32.c, but subverted a little */
+
+struct mips_hi16 {
+	struct mips_hi16 *next;
+	Elf32_Addr *addr;
+	Elf32_Addr value;
+};
+
+static struct mips_hi16 *mips_hi16_list;
+static unsigned int gp_offs, gp_addr;
+
+static int apply_r_mips_none(struct module *me, uint32_t *location,
+			     Elf32_Addr v)
+{
+	return 0;
+}
+
+static int apply_r_mips_gprel16(struct module *me, uint32_t *location,
+				Elf32_Addr v)
+{
+	int rel;
+
+	if( !(*location & 0xffff) ) {
+		rel = (int)v - gp_addr;
+	}
+	else {
+		/* .sbss + gp(relative) + offset */
+		/* kludge! */
+		rel =  (int)(short)((int)v + gp_offs +
+				    (int)(short)(*location & 0xffff) - gp_addr);
+	}
+
+	if( (rel > 32768) || (rel < -32768) ) {
+		printk(KERN_ERR
+		       "apply_r_mips_gprel16: relative address out of range 0x%x %d\n",
+		       rel, rel);
+		return -ENOEXEC;
+	}
+
+	*location = (*location & 0xffff0000) | (rel & 0xffff);
+
+	return 0;
+}
+
+static int apply_r_mips_pc16(struct module *me, uint32_t *location,
+			     Elf32_Addr v)
+{
+	int rel;
+	rel = (((unsigned int)v - (unsigned int)location));
+	rel >>= 2;		// because the offset is in _instructions_ not bytes.
+	rel -= 1;		// and one instruction less due to the branch delay slot.
+
+	if( (rel > 32768) || (rel < -32768) ) {
+		printk(KERN_ERR
+		       "apply_r_mips_pc16: relative address out of range 0x%x\n", rel);
+		return -ENOEXEC;
+	}
+
+	*location = (*location & 0xffff0000) | (rel & 0xffff);
+
+	return 0;
+}
+
+static int apply_r_mips_32(struct module *me, uint32_t *location,
+			   Elf32_Addr v)
+{
+	*location += v;
+
+	return 0;
+}
+
+static int apply_r_mips_26(struct module *me, uint32_t *location,
+			   Elf32_Addr v)
+{
+	if (v % 4) {
+		printk(KERN_ERR "module %s: dangerous relocation mod4\n", me->name);
+		return -ENOEXEC;
+	}
+
+/* Not desperately convinced this is a good check of an overflow condition
+   anyway. But it gets in the way of handling undefined weak symbols which
+   we want to set to zero.
+   if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+   printk(KERN_ERR
+   "module %s: relocation overflow\n",
+   me->name);
+   return -ENOEXEC;
+   }
+*/
+
+	*location = (*location & ~0x03ffffff) |
+		((*location + (v >> 2)) & 0x03ffffff);
+	return 0;
+}
+
+static int apply_r_mips_hi16(struct module *me, uint32_t *location,
+			     Elf32_Addr v)
+{
+	struct mips_hi16 *n;
+
+	/*
+	 * We cannot relocate this one now because we don't know the value of
+	 * the carry we need to add.  Save the information, and let LO16 do the
+	 * actual relocation.
+	 */
+	n = kmalloc(sizeof *n, GFP_KERNEL);
+	if (!n)
+		return -ENOMEM;
+
+	n->addr = location;
+	n->value = v;
+	n->next = mips_hi16_list;
+	mips_hi16_list = n;
+
+	return 0;
+}
+
+static int apply_r_mips_lo16(struct module *me, uint32_t *location,
+			     Elf32_Addr v)
+{
+	unsigned long insnlo = *location;
+	Elf32_Addr val, vallo;
+
+	/* Sign extend the addend we extract from the lo insn.  */
+	vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
+
+	if (mips_hi16_list != NULL) {
+		struct mips_hi16 *l;
+
+		l = mips_hi16_list;
+		while (l != NULL) {
+			struct mips_hi16 *next;
+			unsigned long insn;
+
+			/*
+			 * The value for the HI16 had best be the same.
+			 */
+			if (v != l->value) {
+				printk("%d != %d\n", v, l->value);
+				goto out_danger;
+			}
+
+
+			/*
+			 * Do the HI16 relocation.  Note that we actually don't
+			 * need to know anything about the LO16 itself, except
+			 * where to find the low 16 bits of the addend needed
+			 * by the LO16.
+			 */
+			insn = *l->addr;
+			val = ((insn & 0xffff) << 16) + vallo;
+			val += v;
+
+			/*
+			 * Account for the sign extension that will happen in
+			 * the low bits.
+			 */
+			val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
+
+			insn = (insn & ~0xffff) | val;
+			*l->addr = insn;
+
+			next = l->next;
+			kfree(l);
+			l = next;
+		}
+
+		mips_hi16_list = NULL;
+	}
+
+	/*
+	 * Ok, we're done with the HI16 relocs.  Now deal with the LO16.
+	 */
+	val = v + vallo;
+	insnlo = (insnlo & ~0xffff) | (val & 0xffff);
+	*location = insnlo;
+
+	return 0;
+
+out_danger:
+	printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
+
+	return -ENOEXEC;
+}
+
+static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
+				Elf32_Addr v) = {
+	[R_MIPS_NONE]	= apply_r_mips_none,
+	[R_MIPS_32]	= apply_r_mips_32,
+	[R_MIPS_26]	= apply_r_mips_26,
+	[R_MIPS_HI16]	= apply_r_mips_hi16,
+	[R_MIPS_LO16]	= apply_r_mips_lo16,
+	[R_MIPS_GPREL16] = apply_r_mips_gprel16,
+	[R_MIPS_PC16] = apply_r_mips_pc16
+};
+
+
+int apply_relocations(Elf32_Shdr *sechdrs,
+		      const char *strtab,
+		      unsigned int symindex,
+		      unsigned int relsec,
+		      struct module *me)
+{
+	Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr;
+	Elf32_Sym *sym;
+	uint32_t *location;
+	unsigned int i;
+	Elf32_Addr v;
+	int res;
+
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		Elf32_Word r_info = rel[i].r_info;
+
+		/* This is where to make the change */
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+		/* This is the symbol it is referring to */
+		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+			+ ELF32_R_SYM(r_info);
+
+		if (!sym->st_value) {
+			printk(KERN_DEBUG "%s: undefined weak symbol %s\n",
+			       me->name, strtab + sym->st_name);
+			/* just print the warning, dont barf */
+		}
+
+		v = sym->st_value;
+
+		res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
+		if( res ) {
+			printk(KERN_DEBUG
+			       "relocation error 0x%x sym refer <%s> value 0x%x "
+			       "type 0x%x r_info 0x%x\n",
+			       (unsigned int)location, strtab + sym->st_name, v,
+			       r_info, ELF32_R_TYPE(r_info));
+		}
+
+		if (res)
+			return res;
+	}
+
+	return 0;
+}
+
+void save_gp_address(unsigned int secbase, unsigned int rel)
+{
+	gp_addr = secbase + rel;
+	gp_offs = gp_addr - (secbase & 0xffff0000);
+}
+/* end module-elf32.c */
+
+
+
+/* Change all symbols so that sh_value encodes the pointer directly. */
+static int simplify_symbols(Elf_Shdr * sechdrs,
+			    unsigned int symindex,
+			    const char *strtab,
+			    const char *secstrings,
+			    unsigned int nsecs, struct module *mod)
+{
+	Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+	unsigned long secbase, bssbase = 0;
+	unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+	int ret = 0, size;
+
+	/* find the .bss section for COMMON symbols */
+	for (i = 0; i < nsecs; i++) {
+		if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0)
+			bssbase = sechdrs[i].sh_addr;
+	}
+
+	for (i = 1; i < n; i++) {
+		switch (sym[i].st_shndx) {
+		case SHN_COMMON:
+			/* Allocate space for the symbol in the .bss section. st_value is currently size.
+			   We want it to have the address of the symbol. */
+
+			size = sym[i].st_value;
+			sym[i].st_value = bssbase;
+
+			bssbase += size;
+			break;
+
+		case SHN_ABS:
+			/* Don't need to do anything */
+			break;
+
+		case SHN_UNDEF:
+			/* ret = -ENOENT; */
+			break;
+
+		case SHN_MIPS_SCOMMON:
+
+			printk(KERN_DEBUG
+			       "simplify_symbols: ignoring SHN_MIPS_SCOMMON symbol <%s> st_shndx %d\n",
+			       strtab + sym[i].st_name, sym[i].st_shndx);
+
+			// .sbss section
+			break;
+
+		default:
+			secbase = sechdrs[sym[i].st_shndx].sh_addr;
+
+			if (strncmp(strtab + sym[i].st_name, "_gp", 3) == 0) {
+				save_gp_address(secbase, sym[i].st_value);
+			}
+
+			sym[i].st_value += secbase;
+			break;
+		}
+
+	}
+
+	return ret;
+}
+
+#ifdef DEBUG_ELFLOADER
+static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex,
+			    const char *strtab, struct module *mod)
+{
+	Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+	unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+
+	printk(KERN_DEBUG "dump_elfsymbols: n %d\n", n);
+	for (i = 1; i < n; i++) {
+		printk(KERN_DEBUG " i %d name <%s> 0x%x\n", i,
+		       strtab + sym[i].st_name, sym[i].st_value);
+	}
+}
+#endif
+
+static void dump_tc(struct tc *t)
+{
+	printk(KERN_WARNING "VPE: TC index %d TCStatus 0x%lx halt 0x%lx\n",
+	       t->index, read_tc_c0_tcstatus(), read_tc_c0_tchalt());
+	printk(KERN_WARNING "VPE: tcrestart 0x%lx\n", read_tc_c0_tcrestart());
+}
+
+static void dump_tclist(void)
+{
+	struct tc *t;
+
+	list_for_each_entry(t, &vpecontrol.tc_list, list) {
+		dump_tc(t);
+	}
+}
+
+/* We are prepared so configure and start the VPE... */
+int vpe_run(vpe_t * v)
+{
+	unsigned long val;
+	struct tc *t;
+
+	/* check we are the Master VPE */
+	val = read_c0_vpeconf0();
+	if (!(val & VPECONF0_MVP)) {
+		printk(KERN_WARNING
+		       "VPE: only Master VPE's are allowed to configure MT\n");
+		return -1;
+	}
+
+	/* disable MT (using dvpe) */
+	dvpe();
+
+	/* Put MVPE's into 'configuration state' */
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	if (!list_empty(&v->tc)) {
+		if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
+			printk(KERN_WARNING "VPE: TC %d is already in use.\n",
+			       t->index);
+			return -ENOEXEC;
+		}
+	} else {
+		printk(KERN_WARNING "VPE: No TC's associated with VPE %d\n",
+		       v->minor);
+		return -ENOEXEC;
+	}
+
+	settc(t->index);
+
+	val = read_vpe_c0_vpeconf0();
+
+	/* should check it is halted, and not activated */
+	if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) {
+		printk(KERN_WARNING "VPE: TC %d is already doing something!\n",
+		       t->index);
+
+		dump_tclist();
+		return -ENOEXEC;
+	}
+
+	/* Write the address we want it to start running from in the TCPC register. */
+	write_tc_c0_tcrestart((unsigned long)v->__start);
+
+	/* write the sivc_info address to tccontext */
+	write_tc_c0_tccontext((unsigned long)0);
+
+	/* Set up the XTC bit in vpeconf0 to point at our tc */
+	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | (t->index << VPECONF0_XTC_SHIFT));
+
+	/* mark the TC as activated, not interrupt exempt and not dynamically allocatable */
+	val = read_tc_c0_tcstatus();
+	val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A;
+	write_tc_c0_tcstatus(val);
+
+	write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
+
+	/* set up VPE1 */
+	write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);	// no multiple TC's
+	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);	// enable this VPE
+
+	/*
+	 * The sde-kit passes 'memsize' to __start in $a3, so set something
+	 * here...
+	 * Or set $a3 (register 7) to zero and define DFLT_STACK_SIZE and
+	 * DFLT_HEAP_SIZE when you compile your program
+	 */
+
+	mttgpr(7, 0);
+
+	/* set config to be the same as vpe0, particularly kseg0 coherency alg */
+	write_vpe_c0_config(read_c0_config());
+
+	/* clear out any left overs from a previous program */
+	write_vpe_c0_cause(0);
+
+	/* take system out of configuration state */
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	/* clear interrupts enabled IE, ERL, EXL, and KSU from c0 status */
+	write_vpe_c0_status(read_vpe_c0_status() & ~(ST0_ERL | ST0_KSU | ST0_IE | ST0_EXL));
+
+	/* set it running */
+	evpe(EVPE_ENABLE);
+
+	return 0;
+}
+
+static unsigned long find_vpe_symbols(vpe_t * v, Elf_Shdr * sechdrs,
+				      unsigned int symindex, const char *strtab,
+				      struct module *mod)
+{
+	Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+	unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+
+	for (i = 1; i < n; i++) {
+		if (strcmp(strtab + sym[i].st_name, "__start") == 0) {
+			v->__start = sym[i].st_value;
+		}
+
+		if (strcmp(strtab + sym[i].st_name, "vpe_shared") == 0) {
+			v->shared_ptr = (void *)sym[i].st_value;
+		}
+	}
+
+	return 0;
+}
+
+/* Allocates a VPE with some program code space(the load address), copies the contents
+   of the program (p)buffer performing relocatations/etc, free's it when finished.
+*/
+int vpe_elfload(vpe_t * v)
+{
+	Elf_Ehdr *hdr;
+	Elf_Shdr *sechdrs;
+	long err = 0;
+	char *secstrings, *strtab = NULL;
+	unsigned int len, i, symindex = 0, strindex = 0;
+
+	struct module mod;	// so we can re-use the relocations code
+
+	memset(&mod, 0, sizeof(struct module));
+	strcpy(mod.name, "VPE dummy prog module");
+
+	hdr = (Elf_Ehdr *) v->pbuffer;
+	len = v->plen;
+
+	/* Sanity checks against insmoding binaries or wrong arch,
+	   weird elf version */
+	if (memcmp(hdr->e_ident, ELFMAG, 4) != 0
+	    || hdr->e_type != ET_REL || !elf_check_arch(hdr)
+	    || hdr->e_shentsize != sizeof(*sechdrs)) {
+		printk(KERN_WARNING
+		       "VPE program, wrong arch or weird elf version\n");
+
+		return -ENOEXEC;
+	}
+
+	if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) {
+		printk(KERN_ERR "VPE program length %u truncated\n", len);
+		return -ENOEXEC;
+	}
+
+	/* Convenience variables */
+	sechdrs = (void *)hdr + hdr->e_shoff;
+	secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+	sechdrs[0].sh_addr = 0;
+
+	/* And these should exist, but gcc whinges if we don't init them */
+	symindex = strindex = 0;
+
+	for (i = 1; i < hdr->e_shnum; i++) {
+
+		if (sechdrs[i].sh_type != SHT_NOBITS
+		    && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) {
+			printk(KERN_ERR "VPE program length %u truncated\n",
+			       len);
+			return -ENOEXEC;
+		}
+
+		/* Mark all sections sh_addr with their address in the
+		   temporary image. */
+		sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
+
+		/* Internal symbols and strings. */
+		if (sechdrs[i].sh_type == SHT_SYMTAB) {
+			symindex = i;
+			strindex = sechdrs[i].sh_link;
+			strtab = (char *)hdr + sechdrs[strindex].sh_offset;
+		}
+	}
+
+	layout_sections(&mod, hdr, sechdrs, secstrings);
+
+	v->load_addr = alloc_progmem(mod.core_size);
+	memset(v->load_addr, 0, mod.core_size);
+
+	printk("VPE elf_loader: loading to %p\n", v->load_addr);
+
+	for (i = 0; i < hdr->e_shnum; i++) {
+		void *dest;
+
+		if (!(sechdrs[i].sh_flags & SHF_ALLOC))
+			continue;
+
+		dest = v->load_addr + sechdrs[i].sh_entsize;
+
+		if (sechdrs[i].sh_type != SHT_NOBITS)
+			memcpy(dest, (void *)sechdrs[i].sh_addr,
+			       sechdrs[i].sh_size);
+		/* Update sh_addr to point to copy in image. */
+		sechdrs[i].sh_addr = (unsigned long)dest;
+	}
+
+	/* Fix up syms, so that st_value is a pointer to location. */
+	err =
+		simplify_symbols(sechdrs, symindex, strtab, secstrings,
+				 hdr->e_shnum, &mod);
+	if (err < 0) {
+		printk(KERN_WARNING "VPE: unable to simplify symbols\n");
+		goto cleanup;
+	}
+
+	/* Now do relocations. */
+	for (i = 1; i < hdr->e_shnum; i++) {
+		const char *strtab = (char *)sechdrs[strindex].sh_addr;
+		unsigned int info = sechdrs[i].sh_info;
+
+		/* Not a valid relocation section? */
+		if (info >= hdr->e_shnum)
+			continue;
+
+		/* Don't bother with non-allocated sections */
+		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
+			continue;
+
+		if (sechdrs[i].sh_type == SHT_REL)
+			err =
+				apply_relocations(sechdrs, strtab, symindex, i, &mod);
+		else if (sechdrs[i].sh_type == SHT_RELA)
+			err = apply_relocate_add(sechdrs, strtab, symindex, i,
+						 &mod);
+		if (err < 0) {
+			printk(KERN_WARNING
+			       "vpe_elfload: error in relocations err %ld\n",
+			       err);
+			goto cleanup;
+		}
+	}
+
+	/* make sure it's physically written out */
+	flush_icache_range((unsigned long)v->load_addr,
+			   (unsigned long)v->load_addr + v->len);
+
+	if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
+
+		printk(KERN_WARNING
+		       "VPE: program doesn't contain __start or vpe_shared symbols\n");
+		err = -ENOEXEC;
+	}
+
+	printk(" elf loaded\n");
+
+cleanup:
+	return err;
+}
+
+static void dump_vpe(vpe_t * v)
+{
+	struct tc *t;
+
+	printk(KERN_DEBUG "VPEControl 0x%lx\n", read_vpe_c0_vpecontrol());
+	printk(KERN_DEBUG "VPEConf0 0x%lx\n", read_vpe_c0_vpeconf0());
+
+	list_for_each_entry(t, &vpecontrol.tc_list, list) {
+		dump_tc(t);
+	}
+}
+
+/* checks for VPE is unused and gets ready to load program	 */
+static int vpe_open(struct inode *inode, struct file *filp)
+{
+	int minor;
+	vpe_t *v;
+
+	/* assume only 1 device at the mo. */
+	if ((minor = MINOR(inode->i_rdev)) != 1) {
+		printk(KERN_WARNING "VPE: only vpe1 is supported\n");
+		return -ENODEV;
+	}
+
+	if ((v = get_vpe(minor)) == NULL) {
+		printk(KERN_WARNING "VPE: unable to get vpe\n");
+		return -ENODEV;
+	}
+
+	if (v->state != VPE_STATE_UNUSED) {
+		unsigned long tmp;
+		struct tc *t;
+
+		printk(KERN_WARNING "VPE: device %d already in use\n", minor);
+
+		dvpe();
+		dump_vpe(v);
+
+		printk(KERN_WARNING "VPE: re-initialising %d\n", minor);
+
+		release_progmem(v->load_addr);
+
+		t = get_tc(minor);
+		settc(minor);
+		tmp = read_tc_c0_tcstatus();
+
+		/* mark not allocated and not dynamically allocatable */
+		tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+		tmp |= TCSTATUS_IXMT;	/* interrupt exempt */
+		write_tc_c0_tcstatus(tmp);
+
+		write_tc_c0_tchalt(TCHALT_H);
+
+	}
+
+	// allocate it so when we get write ops we know it's expected.
+	v->state = VPE_STATE_INUSE;
+
+	/* this of-course trashes what was there before... */
+	v->pbuffer = vmalloc(P_SIZE);
+	v->plen = P_SIZE;
+	v->load_addr = NULL;
+	v->len = 0;
+
+	return 0;
+}
+
+static int vpe_release(struct inode *inode, struct file *filp)
+{
+	int minor, ret = 0;
+	vpe_t *v;
+	Elf_Ehdr *hdr;
+
+	minor = MINOR(inode->i_rdev);
+	if ((v = get_vpe(minor)) == NULL)
+		return -ENODEV;
+
+	// simple case of fire and forget, so tell the VPE to run...
+
+	hdr = (Elf_Ehdr *) v->pbuffer;
+	if (memcmp(hdr->e_ident, ELFMAG, 4) == 0) {
+		if (vpe_elfload(v) >= 0)
+			vpe_run(v);
+		else {
+			printk(KERN_WARNING "VPE: ELF load failed.\n");
+			ret = -ENOEXEC;
+		}
+	} else {
+		printk(KERN_WARNING "VPE: only elf files are supported\n");
+		ret = -ENOEXEC;
+	}
+
+	// cleanup any temp buffers
+	if (v->pbuffer)
+		vfree(v->pbuffer);
+	v->plen = 0;
+	return ret;
+}
+
+static ssize_t vpe_write(struct file *file, const char __user * buffer,
+			 size_t count, loff_t * ppos)
+{
+	int minor;
+	size_t ret = count;
+	vpe_t *v;
+
+	minor = MINOR(file->f_dentry->d_inode->i_rdev);
+	if ((v = get_vpe(minor)) == NULL)
+		return -ENODEV;
+
+	if (v->pbuffer == NULL) {
+		printk(KERN_ERR "vpe_write: no pbuffer\n");
+		return -ENOMEM;
+	}
+
+	if ((count + v->len) > v->plen) {
+		printk(KERN_WARNING
+		       "VPE Loader: elf size too big. Perhaps strip uneeded symbols\n");
+		return -ENOMEM;
+	}
+
+	count -= copy_from_user(v->pbuffer + v->len, buffer, count);
+	if (!count) {
+		printk("vpe_write: copy_to_user failed\n");
+		return -EFAULT;
+	}
+
+	v->len += count;
+	return ret;
+}
+
+static struct file_operations vpe_fops = {
+	.owner = THIS_MODULE,
+	.open = vpe_open,
+	.release = vpe_release,
+	.write = vpe_write
+};
+
+/* module wrapper entry points */
+/* give me a vpe */
+vpe_handle vpe_alloc(void)
+{
+	int i;
+	struct vpe *v;
+
+	/* find a vpe */
+	for (i = 1; i < MAX_VPES; i++) {
+		if ((v = get_vpe(i)) != NULL) {
+			v->state = VPE_STATE_INUSE;
+			return v;
+		}
+	}
+	return NULL;
+}
+
+EXPORT_SYMBOL(vpe_alloc);
+
+/* start running from here */
+int vpe_start(vpe_handle vpe, unsigned long start)
+{
+	struct vpe *v = vpe;
+
+	v->__start = start;
+	return vpe_run(v);
+}
+
+EXPORT_SYMBOL(vpe_start);
+
+/* halt it for now */
+int vpe_stop(vpe_handle vpe)
+{
+	struct vpe *v = vpe;
+	struct tc *t;
+	unsigned int evpe_flags;
+
+	evpe_flags = dvpe();
+
+	if ((t = list_entry(v->tc.next, struct tc, tc)) != NULL) {
+
+		settc(t->index);
+		write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
+	}
+
+	evpe(evpe_flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(vpe_stop);
+
+/* I've done with it thank you */
+int vpe_free(vpe_handle vpe)
+{
+	struct vpe *v = vpe;
+	struct tc *t;
+	unsigned int evpe_flags;
+
+	if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
+		return -ENOEXEC;
+	}
+
+	evpe_flags = dvpe();
+
+	/* Put MVPE's into 'configuration state' */
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	settc(t->index);
+	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
+
+	/* mark the TC unallocated and halt'ed */
+	write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A);
+	write_tc_c0_tchalt(TCHALT_H);
+
+	v->state = VPE_STATE_UNUSED;
+
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+	evpe(evpe_flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(vpe_free);
+
+void *vpe_get_shared(int index)
+{
+	struct vpe *v;
+
+	if ((v = get_vpe(index)) == NULL) {
+		printk(KERN_WARNING "vpe: invalid vpe index %d\n", index);
+		return NULL;
+	}
+
+	return v->shared_ptr;
+}
+
+EXPORT_SYMBOL(vpe_get_shared);
+
+static int __init vpe_module_init(void)
+{
+	struct vpe *v = NULL;
+	struct tc *t;
+	unsigned long val;
+	int i;
+
+	if (!cpu_has_mipsmt) {
+		printk("VPE loader: not a MIPS MT capable processor\n");
+		return -ENODEV;
+	}
+
+	if ((major = register_chrdev(VPE_MAJOR, module_name, &vpe_fops) < 0)) {
+		printk("VPE loader: unable to register character device\n");
+		return -EBUSY;
+	}
+
+	if (major == 0)
+		major = VPE_MAJOR;
+
+	dmt();
+	dvpe();
+
+	/* Put MVPE's into 'configuration state' */
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	/* dump_mtregs(); */
+
+	INIT_LIST_HEAD(&vpecontrol.vpe_list);
+	INIT_LIST_HEAD(&vpecontrol.tc_list);
+
+	val = read_c0_mvpconf0();
+	for (i = 0; i < ((val & MVPCONF0_PTC) + 1); i++) {
+		t = alloc_tc(i);
+
+		/* VPE's */
+		if (i < ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1) {
+			settc(i);
+
+			if ((v = alloc_vpe(i)) == NULL) {
+				printk(KERN_WARNING "VPE: unable to allocate VPE\n");
+				return -ENODEV;
+			}
+
+			list_add(&t->tc, &v->tc);	/* add the tc to the list of this vpe's tc's. */
+
+			/* deactivate all but vpe0 */
+			if (i != 0) {
+				unsigned long tmp = read_vpe_c0_vpeconf0();
+
+				tmp &= ~VPECONF0_VPA;
+
+				/* master VPE */
+				tmp |= VPECONF0_MVP;
+				write_vpe_c0_vpeconf0(tmp);
+			}
+
+			/* disable multi-threading with TC's */
+			write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
+
+			if (i != 0) {
+				write_vpe_c0_status((read_c0_status() &
+						     ~(ST0_IM | ST0_IE | ST0_KSU))
+						    | ST0_CU0);
+
+				/* set config to be the same as vpe0, particularly kseg0 coherency alg */
+				write_vpe_c0_config(read_c0_config());
+			}
+
+		}
+
+		/* TC's */
+		t->pvpe = v;	/* set the parent vpe */
+
+		if (i != 0) {
+			unsigned long tmp;
+
+			/* tc 0 will of course be running.... */
+			if (i == 0)
+				t->state = TC_STATE_RUNNING;
+
+			settc(i);
+
+			/* bind a TC to each VPE, May as well put all excess TC's
+			   on the last VPE */
+			if (i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1))
+				write_tc_c0_tcbind(read_tc_c0_tcbind() |
+						   ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT));
+			else
+				write_tc_c0_tcbind(read_tc_c0_tcbind() | i);
+
+			tmp = read_tc_c0_tcstatus();
+
+			/* mark not allocated and not dynamically allocatable */
+			tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+			tmp |= TCSTATUS_IXMT;	/* interrupt exempt */
+			write_tc_c0_tcstatus(tmp);
+
+			write_tc_c0_tchalt(TCHALT_H);
+		}
+	}
+
+	/* release config state */
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	return 0;
+}
+
+static void __exit vpe_module_exit(void)
+{
+	struct vpe *v, *n;
+
+	list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
+		if (v->state != VPE_STATE_UNUSED) {
+			release_vpe(v);
+		}
+	}
+
+	unregister_chrdev(major, module_name);
+}
+
+module_init(vpe_module_init);
+module_exit(vpe_module_exit);
+MODULE_DESCRIPTION("MIPS VPE Loader");
+MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/lasat/Kconfig b/arch/mips/lasat/Kconfig
new file mode 100644
index 000000000000..1d2ee8a9be13
--- /dev/null
+++ b/arch/mips/lasat/Kconfig
@@ -0,0 +1,15 @@
+config PICVUE
+	tristate "PICVUE LCD display driver"
+	depends on LASAT
+
+config PICVUE_PROC
+	tristate "PICVUE LCD display driver /proc interface"
+	depends on PICVUE
+
+config DS1603
+	bool "DS1603 RTC driver"
+	depends on LASAT
+
+config LASAT_SYSCTL
+	bool "LASAT sysctl interface"
+	depends on LASAT
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
index c90da1639440..852a41901a5e 100644
--- a/arch/mips/lasat/interrupt.c
+++ b/arch/mips/lasat/interrupt.c
@@ -71,14 +71,13 @@ static void end_lasat_irq(unsigned int irq)
 }
 
 static struct hw_interrupt_type lasat_irq_type = {
-	"Lasat",
-	startup_lasat_irq,
-	shutdown_lasat_irq,
-	enable_lasat_irq,
-	disable_lasat_irq,
-	mask_and_ack_lasat_irq,
-	end_lasat_irq,
-	NULL
+	.typename = "Lasat",
+	.startup = startup_lasat_irq,
+	.shutdown = shutdown_lasat_irq,
+	.enable = enable_lasat_irq,
+	.disable = disable_lasat_irq,
+	.ack = mask_and_ack_lasat_irq,
+	.end = end_lasat_irq,
 };
 
 static inline int ls1bit32(unsigned int x)
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
index f2604fab9a99..dcd819d57dae 100644
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -155,7 +155,7 @@ void __init serial_init(void)
 }
 #endif
 
-static int __init lasat_setup(void)
+void __init plat_setup(void)
 {
 	int i;
 	lasat_misc  = &lasat_misc_info[mips_machtype];
@@ -185,8 +185,4 @@ static int __init lasat_setup(void)
 	change_c0_status(ST0_BEV,0);
 
 	prom_printf("Lasat specific initialization complete\n");
-
-        return 0;
 }
-
-early_initcall(lasat_setup);
diff --git a/arch/mips/lib-32/dump_tlb.c b/arch/mips/lib-32/dump_tlb.c
index 019ac8f005d7..46519f4331eb 100644
--- a/arch/mips/lib-32/dump_tlb.c
+++ b/arch/mips/lib-32/dump_tlb.c
@@ -20,16 +20,25 @@
 static inline const char *msk2str(unsigned int mask)
 {
 	switch (mask) {
-	case PM_4K:	return "4kb";
-	case PM_16K:	return "16kb";
-	case PM_64K:	return "64kb";
-	case PM_256K:	return "256kb";
+	case PM_4K:
+		return "4kb";
+	case PM_16K:
+		return "16kb";
+	case PM_64K:
+		return "64kb";
+	case PM_256K:
+		return "256kb";
 #ifndef CONFIG_CPU_VR41XX
-	case PM_1M:	return "1Mb";
-	case PM_4M:	return "4Mb";
-	case PM_16M:	return "16Mb";
-	case PM_64M:	return "64Mb";
-	case PM_256M:	return "256Mb";
+	case PM_1M:
+		return "1Mb";
+	case PM_4M:
+		return "4Mb";
+	case PM_16M:
+		return "16Mb";
+	case PM_64M:
+		return "64Mb";
+	case PM_256M:
+		return "256Mb";
 #endif
 	}
 
@@ -47,7 +56,7 @@ void dump_tlb(int first, int last)
 	unsigned int pagemask, c0, c1, asid;
 	unsigned long long entrylo0, entrylo1;
 	unsigned long entryhi;
-	int	i;
+	int i;
 
 	asid = read_c0_entryhi() & 0xff;
 
@@ -58,7 +67,7 @@ void dump_tlb(int first, int last)
 		tlb_read();
 		BARRIER();
 		pagemask = read_c0_pagemask();
-		entryhi  = read_c0_entryhi();
+		entryhi = read_c0_entryhi();
 		entrylo0 = read_c0_entrylo0();
 		entrylo1 = read_c0_entrylo1();
 
@@ -78,13 +87,11 @@ void dump_tlb(int first, int last)
 			printk("\t\t\t[pa=%08Lx c=%d d=%d v=%d g=%Ld]\n",
 			       (entrylo0 << 6) & PAGE_MASK, c0,
 			       (entrylo0 & 4) ? 1 : 0,
-			       (entrylo0 & 2) ? 1 : 0,
-			       (entrylo0 & 1));
+			       (entrylo0 & 2) ? 1 : 0, (entrylo0 & 1));
 			printk("\t\t\t[pa=%08Lx c=%d d=%d v=%d g=%Ld]\n",
 			       (entrylo1 << 6) & PAGE_MASK, c1,
 			       (entrylo1 & 4) ? 1 : 0,
-			       (entrylo1 & 2) ? 1 : 0,
-			       (entrylo1 & 1));
+			       (entrylo1 & 2) ? 1 : 0, (entrylo1 & 1));
 			printk("\n");
 		}
 	}
@@ -99,7 +106,7 @@ void dump_tlb_all(void)
 
 void dump_tlb_wired(void)
 {
-	int	wired;
+	int wired;
 
 	wired = read_c0_wired();
 	printk("Wired: %d", wired);
@@ -138,9 +145,10 @@ void dump_tlb_nonwired(void)
 
 void dump_list_process(struct task_struct *t, void *address)
 {
-	pgd_t	*page_dir, *pgd;
-	pmd_t	*pmd;
-	pte_t	*pte, page;
+	pgd_t *page_dir, *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte, page;
 	unsigned long addr, val;
 
 	addr = (unsigned long) address;
@@ -152,21 +160,27 @@ void dump_list_process(struct task_struct *t, void *address)
 
 	if (addr > KSEG0)
 		page_dir = pgd_offset_k(0);
-	else
+	else if (t->mm) {
 		page_dir = pgd_offset(t->mm, 0);
-	printk("page_dir == %08x\n", (unsigned int) page_dir);
+		printk("page_dir == %08x\n", (unsigned int) page_dir);
+	} else
+		printk("Current thread has no mm\n");
 
 	if (addr > KSEG0)
 		pgd = pgd_offset_k(addr);
-	else
+	else if (t->mm) {
 		pgd = pgd_offset(t->mm, addr);
-	printk("pgd == %08x, ", (unsigned int) pgd);
+		printk("pgd == %08x, ", (unsigned int) pgd);
+		pud = pud_offset(pgd, addr);
+		printk("pud == %08x, ", (unsigned int) pud);
 
-	pmd = pmd_offset(pgd, addr);
-	printk("pmd == %08x, ", (unsigned int) pmd);
+		pmd = pmd_offset(pud, addr);
+		printk("pmd == %08x, ", (unsigned int) pmd);
 
-	pte = pte_offset(pmd, addr);
-	printk("pte == %08x, ", (unsigned int) pte);
+		pte = pte_offset(pmd, addr);
+		printk("pte == %08x, ", (unsigned int) pte);
+	} else
+		printk("Current thread has no mm\n");
 
 	page = *pte;
 #ifdef CONFIG_64BIT_PHYS_ADDR
@@ -176,14 +190,22 @@ void dump_list_process(struct task_struct *t, void *address)
 #endif
 
 	val = pte_val(page);
-	if (val & _PAGE_PRESENT) printk("present ");
-	if (val & _PAGE_READ) printk("read ");
-	if (val & _PAGE_WRITE) printk("write ");
-	if (val & _PAGE_ACCESSED) printk("accessed ");
-	if (val & _PAGE_MODIFIED) printk("modified ");
-	if (val & _PAGE_R4KBUG) printk("r4kbug ");
-	if (val & _PAGE_GLOBAL) printk("global ");
-	if (val & _PAGE_VALID) printk("valid ");
+	if (val & _PAGE_PRESENT)
+		printk("present ");
+	if (val & _PAGE_READ)
+		printk("read ");
+	if (val & _PAGE_WRITE)
+		printk("write ");
+	if (val & _PAGE_ACCESSED)
+		printk("accessed ");
+	if (val & _PAGE_MODIFIED)
+		printk("modified ");
+	if (val & _PAGE_R4KBUG)
+		printk("r4kbug ");
+	if (val & _PAGE_GLOBAL)
+		printk("global ");
+	if (val & _PAGE_VALID)
+		printk("valid ");
 	printk("\n");
 }
 
@@ -194,14 +216,16 @@ void dump_list_current(void *address)
 
 unsigned int vtop(void *address)
 {
-	pgd_t	*pgd;
-	pmd_t	*pmd;
-	pte_t	*pte;
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
 	unsigned int addr, paddr;
 
 	addr = (unsigned long) address;
 	pgd = pgd_offset(current->mm, addr);
-	pmd = pmd_offset(pgd, addr);
+	pud = pud_offset(pgd, addr);
+	pmd = pmd_offset(pud, addr);
 	pte = pte_offset(pmd, addr);
 	paddr = (KSEG1 | (unsigned int) pte_val(*pte)) & PAGE_MASK;
 	paddr |= (addr & ~PAGE_MASK);
@@ -214,9 +238,9 @@ void dump16(unsigned long *p)
 	int i;
 
 	for (i = 0; i < 8; i++) {
-		printk("*%08lx == %08lx, ", (unsigned long)p, *p);
+		printk("*%08lx == %08lx, ", (unsigned long) p, *p);
 		p++;
-		printk("*%08lx == %08lx\n", (unsigned long)p, *p);
+		printk("*%08lx == %08lx\n", (unsigned long) p, *p);
 		p++;
 	}
 }
diff --git a/arch/mips/lib-32/r3k_dump_tlb.c b/arch/mips/lib-32/r3k_dump_tlb.c
index a878224004e5..4f2cb74f0766 100644
--- a/arch/mips/lib-32/r3k_dump_tlb.c
+++ b/arch/mips/lib-32/r3k_dump_tlb.c
@@ -105,6 +105,7 @@ void dump_tlb_nonwired(void)
 void dump_list_process(struct task_struct *t, void *address)
 {
 	pgd_t	*page_dir, *pgd;
+	pud_t	*pud;
 	pmd_t	*pmd;
 	pte_t	*pte, page;
 	unsigned int addr;
@@ -121,7 +122,10 @@ void dump_list_process(struct task_struct *t, void *address)
 	pgd = pgd_offset(t->mm, addr);
 	printk("pgd == %08x, ", (unsigned int) pgd);
 
-	pmd = pmd_offset(pgd, addr);
+	pud = pud_offset(pgd, addr);
+	printk("pud == %08x, ", (unsigned int) pud);
+
+	pmd = pmd_offset(pud, addr);
 	printk("pmd == %08x, ", (unsigned int) pmd);
 
 	pte = pte_offset(pmd, addr);
@@ -149,13 +153,15 @@ void dump_list_current(void *address)
 unsigned int vtop(void *address)
 {
 	pgd_t	*pgd;
+	pud_t	*pud;
 	pmd_t	*pmd;
 	pte_t	*pte;
 	unsigned int addr, paddr;
 
 	addr = (unsigned long) address;
 	pgd = pgd_offset(current->mm, addr);
-	pmd = pmd_offset(pgd, addr);
+	pud = pud_offset(pgd, addr);
+	pmd = pmd_offset(pud, addr);
 	pte = pte_offset(pmd, addr);
 	paddr = (KSEG1 | (unsigned int) pte_val(*pte)) & PAGE_MASK;
 	paddr |= (addr & ~PAGE_MASK);
diff --git a/arch/mips/lib-64/dump_tlb.c b/arch/mips/lib-64/dump_tlb.c
index 42f88e055b4c..11a5f015f040 100644
--- a/arch/mips/lib-64/dump_tlb.c
+++ b/arch/mips/lib-64/dump_tlb.c
@@ -140,6 +140,7 @@ void dump_tlb_nonwired(void)
 void dump_list_process(struct task_struct *t, void *address)
 {
 	pgd_t	*page_dir, *pgd;
+	pud_t	*pud;
 	pmd_t	*pmd;
 	pte_t	*pte, page;
 	unsigned long addr, val;
@@ -155,7 +156,10 @@ void dump_list_process(struct task_struct *t, void *address)
 	pgd = pgd_offset(t->mm, addr);
 	printk("pgd == %016lx\n", (unsigned long) pgd);
 
-	pmd = pmd_offset(pgd, addr);
+	pud = pud_offset(pgd, addr);
+	printk("pud == %016lx\n", (unsigned long) pud);
+
+	pmd = pmd_offset(pud, addr);
 	printk("pmd == %016lx\n", (unsigned long) pmd);
 
 	pte = pte_offset(pmd, addr);
@@ -184,13 +188,15 @@ void dump_list_current(void *address)
 unsigned int vtop(void *address)
 {
 	pgd_t	*pgd;
+	pud_t	*pud;
 	pmd_t	*pmd;
 	pte_t	*pte;
 	unsigned int addr, paddr;
 
 	addr = (unsigned long) address;
 	pgd = pgd_offset(current->mm, addr);
-	pmd = pmd_offset(pgd, addr);
+	pud = pud_offset(pgd, addr);
+	pmd = pmd_offset(pud, addr);
 	pte = pte_offset(pmd, addr);
 	paddr = (CKSEG1 | (unsigned int) pte_val(*pte)) & PAGE_MASK;
 	paddr |= (addr & ~PAGE_MASK);
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index 037303412909..cf12caf80774 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -2,8 +2,8 @@
 # Makefile for MIPS-specific library files..
 #
 
-lib-y	+= csum_partial_copy.o memcpy.o promlib.o \
-	   strlen_user.o strncpy_user.o strnlen_user.o
+lib-y	+= csum_partial_copy.o memcpy.o promlib.o strlen_user.o strncpy_user.o \
+	   strnlen_user.o uncached.o
 
 obj-y	+= iomap.o
 
diff --git a/arch/mips/lib/csum_partial_copy.c b/arch/mips/lib/csum_partial_copy.c
index ffed0a6a1c16..6e9f366f961d 100644
--- a/arch/mips/lib/csum_partial_copy.c
+++ b/arch/mips/lib/csum_partial_copy.c
@@ -16,8 +16,8 @@
 /*
  * copy while checksumming, otherwise like csum_partial
  */
-unsigned int csum_partial_copy_nocheck(const unsigned char *src, unsigned char *dst,
-	int len, unsigned int sum)
+unsigned int csum_partial_copy_nocheck(const unsigned char *src,
+	unsigned char *dst, int len, unsigned int sum)
 {
 	/*
 	 * It's 2:30 am and I don't feel like doing it real ...
@@ -33,8 +33,8 @@ unsigned int csum_partial_copy_nocheck(const unsigned char *src, unsigned char *
  * Copy from userspace and compute checksum.  If we catch an exception
  * then zero the rest of the buffer.
  */
-unsigned int csum_partial_copy_from_user (const unsigned char *src, unsigned char *dst,
-	int len, unsigned int sum, int *err_ptr)
+unsigned int csum_partial_copy_from_user (const unsigned char __user *src,
+	unsigned char *dst, int len, unsigned int sum, int *err_ptr)
 {
 	int missing;
 
diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S
index a78865f76547..7f9aafa4d80e 100644
--- a/arch/mips/lib/memcpy.S
+++ b/arch/mips/lib/memcpy.S
@@ -13,6 +13,21 @@
  * Mnemonic names for arguments to memcpy/__copy_user
  */
 #include <linux/config.h>
+
+/*
+ * Hack to resolve longstanding prefetch issue
+ *
+ * Prefetching may be fatal on some systems if we're prefetching beyond the
+ * end of memory on some systems.  It's also a seriously bad idea on non
+ * dma-coherent systems.
+ */
+#if !defined(CONFIG_DMA_COHERENT) || !defined(CONFIG_DMA_IP27)
+#undef CONFIG_CPU_HAS_PREFETCH
+#endif
+#ifdef CONFIG_MIPS_MALTA
+#undef CONFIG_CPU_HAS_PREFETCH
+#endif
+
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/regdef.h>
diff --git a/arch/mips/lib/uncached.c b/arch/mips/lib/uncached.c
new file mode 100644
index 000000000000..98ce89f8068b
--- /dev/null
+++ b/arch/mips/lib/uncached.c
@@ -0,0 +1,76 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Thiemo Seufer
+ * Copyright (C) 2005  MIPS Technologies, Inc.  All rights reserved.
+ *	Author: Maciej W. Rozycki <macro@mips.com>
+ */
+
+#include <linux/init.h>
+
+#include <asm/addrspace.h>
+#include <asm/bug.h>
+
+#ifndef CKSEG2
+#define CKSEG2 CKSSEG
+#endif
+#ifndef TO_PHYS_MASK
+#define TO_PHYS_MASK -1
+#endif
+
+/*
+ * FUNC is executed in one of the uncached segments, depending on its
+ * original address as follows:
+ *
+ * 1. If the original address is in CKSEG0 or CKSEG1, then the uncached
+ *    segment used is CKSEG1.
+ * 2. If the original address is in XKPHYS, then the uncached segment
+ *    used is XKPHYS(2).
+ * 3. Otherwise it's a bug.
+ *
+ * The same remapping is done with the stack pointer.  Stack handling
+ * works because we don't handle stack arguments or more complex return
+ * values, so we can avoid sharing the same stack area between a cached
+ * and the uncached mode.
+ */
+unsigned long __init run_uncached(void *func)
+{
+	register long sp __asm__("$sp");
+	register long ret __asm__("$2");
+	long lfunc = (long)func, ufunc;
+	long usp;
+
+	if (sp >= (long)CKSEG0 && sp < (long)CKSEG2)
+		usp = CKSEG1ADDR(sp);
+	else if ((long long)sp >= (long long)PHYS_TO_XKPHYS(0LL, 0) &&
+		 (long long)sp < (long long)PHYS_TO_XKPHYS(8LL, 0))
+		usp = PHYS_TO_XKPHYS((long long)K_CALG_UNCACHED,
+				     XKPHYS_TO_PHYS((long long)sp));
+	else {
+		BUG();
+		usp = sp;
+	}
+	if (lfunc >= (long)CKSEG0 && lfunc < (long)CKSEG2)
+		ufunc = CKSEG1ADDR(lfunc);
+	else if ((long long)lfunc >= (long long)PHYS_TO_XKPHYS(0LL, 0) &&
+		 (long long)lfunc < (long long)PHYS_TO_XKPHYS(8LL, 0))
+		ufunc = PHYS_TO_XKPHYS((long long)K_CALG_UNCACHED,
+				       XKPHYS_TO_PHYS((long long)lfunc));
+	else {
+		BUG();
+		ufunc = lfunc;
+	}
+
+	__asm__ __volatile__ (
+		"	move	$16, $sp\n"
+		"	move	$sp, %1\n"
+		"	jalr	%2\n"
+		"	move	$sp, $16"
+		: "=r" (ret)
+		: "r" (usp), "r" (ufunc)
+		: "$16", "$31");
+
+	return ret;
+}
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 99c550632d44..aa5818a0d884 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -70,7 +70,7 @@ static int fpux_emu(struct pt_regs *,
 
 /* Further private data for which no space exists in mips_fpu_soft_struct */
 
-struct mips_fpu_emulator_private fpuemuprivate;
+struct mips_fpu_emulator_stats fpuemustats;
 
 /* Control registers */
 
@@ -79,7 +79,17 @@ struct mips_fpu_emulator_private fpuemuprivate;
 
 /* Convert Mips rounding mode (0..3) to IEEE library modes. */
 static const unsigned char ieee_rm[4] = {
-	IEEE754_RN, IEEE754_RZ, IEEE754_RU, IEEE754_RD
+	[FPU_CSR_RN] = IEEE754_RN,
+	[FPU_CSR_RZ] = IEEE754_RZ,
+	[FPU_CSR_RU] = IEEE754_RU,
+	[FPU_CSR_RD] = IEEE754_RD,
+};
+/* Convert IEEE library modes to Mips rounding mode (0..3). */
+static const unsigned char mips_rm[4] = {
+	[IEEE754_RN] = FPU_CSR_RN,
+	[IEEE754_RZ] = FPU_CSR_RZ,
+	[IEEE754_RD] = FPU_CSR_RD,
+	[IEEE754_RU] = FPU_CSR_RU,
 };
 
 #if __mips >= 4
@@ -196,11 +206,11 @@ static int isBranchInstr(mips_instruction * i)
 static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 {
 	mips_instruction ir;
-	vaddr_t emulpc, contpc;
+	void * emulpc, *contpc;
 	unsigned int cond;
 
-	if (get_user(ir, (mips_instruction *) xcp->cp0_epc)) {
-		fpuemuprivate.stats.errors++;
+	if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
+		fpuemustats.errors++;
 		return SIGBUS;
 	}
 
@@ -221,41 +231,39 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 		 * Linux MIPS branch emulator operates on context, updating the
 		 * cp0_epc.
 		 */
-		emulpc = REG_TO_VA(xcp->cp0_epc + 4);	/* Snapshot emulation target */
+		emulpc = (void *) (xcp->cp0_epc + 4);	/* Snapshot emulation target */
 
 		if (__compute_return_epc(xcp)) {
 #ifdef CP1DBG
 			printk("failed to emulate branch at %p\n",
-				REG_TO_VA(xcp->cp0_epc));
+				(void *) (xcp->cp0_epc));
 #endif
 			return SIGILL;
 		}
-		if (get_user(ir, (mips_instruction *) emulpc)) {
-			fpuemuprivate.stats.errors++;
+		if (get_user(ir, (mips_instruction __user *) emulpc)) {
+			fpuemustats.errors++;
 			return SIGBUS;
 		}
 		/* __compute_return_epc() will have updated cp0_epc */
-		contpc = REG_TO_VA xcp->cp0_epc;
+		contpc = (void *)  xcp->cp0_epc;
 		/* In order not to confuse ptrace() et al, tweak context */
-		xcp->cp0_epc = VA_TO_REG emulpc - 4;
-	}
-	else {
-		emulpc = REG_TO_VA xcp->cp0_epc;
-		contpc = REG_TO_VA(xcp->cp0_epc + 4);
+		xcp->cp0_epc = (unsigned long) emulpc - 4;
+	} else {
+		emulpc = (void *)  xcp->cp0_epc;
+		contpc = (void *) (xcp->cp0_epc + 4);
 	}
 
       emul:
-	fpuemuprivate.stats.emulated++;
+	fpuemustats.emulated++;
 	switch (MIPSInst_OPCODE(ir)) {
-#ifndef SINGLE_ONLY_FPU
 	case ldc1_op:{
-		u64 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] +
+		u64 __user *va = (u64 __user *) (xcp->regs[MIPSInst_RS(ir)] +
 			MIPSInst_SIMM(ir));
 		u64 val;
 
-		fpuemuprivate.stats.loads++;
+		fpuemustats.loads++;
 		if (get_user(val, va)) {
-			fpuemuprivate.stats.errors++;
+			fpuemustats.errors++;
 			return SIGBUS;
 		}
 		DITOREG(val, MIPSInst_RT(ir));
@@ -263,55 +271,42 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 	}
 
 	case sdc1_op:{
-		u64 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] +
+		u64 __user *va = (u64 __user *) (xcp->regs[MIPSInst_RS(ir)] +
 			MIPSInst_SIMM(ir));
 		u64 val;
 
-		fpuemuprivate.stats.stores++;
+		fpuemustats.stores++;
 		DIFROMREG(val, MIPSInst_RT(ir));
 		if (put_user(val, va)) {
-			fpuemuprivate.stats.errors++;
+			fpuemustats.errors++;
 			return SIGBUS;
 		}
 		break;
 	}
-#endif
 
 	case lwc1_op:{
-		u32 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] +
+		u32 __user *va = (u32 __user *) (xcp->regs[MIPSInst_RS(ir)] +
 			MIPSInst_SIMM(ir));
 		u32 val;
 
-		fpuemuprivate.stats.loads++;
+		fpuemustats.loads++;
 		if (get_user(val, va)) {
-			fpuemuprivate.stats.errors++;
+			fpuemustats.errors++;
 			return SIGBUS;
 		}
-#ifdef SINGLE_ONLY_FPU
-		if (MIPSInst_RT(ir) & 1) {
-			/* illegal register in single-float mode */
-			return SIGILL;
-		}
-#endif
 		SITOREG(val, MIPSInst_RT(ir));
 		break;
 	}
 
 	case swc1_op:{
-		u32 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] +
+		u32 __user *va = (u32 __user *) (xcp->regs[MIPSInst_RS(ir)] +
 			MIPSInst_SIMM(ir));
 		u32 val;
 
-		fpuemuprivate.stats.stores++;
-#ifdef SINGLE_ONLY_FPU
-		if (MIPSInst_RT(ir) & 1) {
-			/* illegal register in single-float mode */
-			return SIGILL;
-		}
-#endif
+		fpuemustats.stores++;
 		SIFROMREG(val, MIPSInst_RT(ir));
 		if (put_user(val, va)) {
-			fpuemuprivate.stats.errors++;
+			fpuemustats.errors++;
 			return SIGBUS;
 		}
 		break;
@@ -320,7 +315,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 	case cop1_op:
 		switch (MIPSInst_RS(ir)) {
 
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
 		case dmfc_op:
 			/* copregister fs -> gpr[rt] */
 			if (MIPSInst_RT(ir) != 0) {
@@ -337,12 +332,6 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 
 		case mfc_op:
 			/* copregister rd -> gpr[rt] */
-#ifdef SINGLE_ONLY_FPU
-			if (MIPSInst_RD(ir) & 1) {
-				/* illegal register in single-float mode */
-				return SIGILL;
-			}
-#endif
 			if (MIPSInst_RT(ir) != 0) {
 				SIFROMREG(xcp->regs[MIPSInst_RT(ir)],
 					MIPSInst_RD(ir));
@@ -351,12 +340,6 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 
 		case mtc_op:
 			/* copregister rd <- rt */
-#ifdef SINGLE_ONLY_FPU
-			if (MIPSInst_RD(ir) & 1) {
-				/* illegal register in single-float mode */
-				return SIGILL;
-			}
-#endif
 			SITOREG(xcp->regs[MIPSInst_RT(ir)], MIPSInst_RD(ir));
 			break;
 
@@ -369,9 +352,10 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 			}
 			if (MIPSInst_RD(ir) == FPCREG_CSR) {
 				value = ctx->fcr31;
+				value = (value & ~0x3) | mips_rm[value & 0x3];
 #ifdef CSRTRACE
 				printk("%p gpr[%d]<-csr=%08x\n",
-					REG_TO_VA(xcp->cp0_epc),
+					(void *) (xcp->cp0_epc),
 					MIPSInst_RT(ir), value);
 #endif
 			}
@@ -398,14 +382,13 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 			if (MIPSInst_RD(ir) == FPCREG_CSR) {
 #ifdef CSRTRACE
 				printk("%p gpr[%d]->csr=%08x\n",
-					REG_TO_VA(xcp->cp0_epc),
+					(void *) (xcp->cp0_epc),
 					MIPSInst_RT(ir), value);
 #endif
-				ctx->fcr31 = value;
-				/* copy new rounding mode and
-				   flush bit to ieee library state! */
-				ieee754_csr.nod = (ctx->fcr31 & 0x1000000) != 0;
-				ieee754_csr.rm = ieee_rm[value & 0x3];
+				value &= (FPU_CSR_FLUSH | FPU_CSR_ALL_E | FPU_CSR_ALL_S | 0x03);
+				ctx->fcr31 &= ~(FPU_CSR_FLUSH | FPU_CSR_ALL_E | FPU_CSR_ALL_S | 0x03);
+				/* convert to ieee library modes */
+				ctx->fcr31 |= (value & ~0x3) | ieee_rm[value & 0x3];
 			}
 			if ((ctx->fcr31 >> 5) & ctx->fcr31 & FPU_CSR_ALL_E) {
 				return SIGFPE;
@@ -445,20 +428,20 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 				 * instruction
 				 */
 				xcp->cp0_epc += 4;
-				contpc = REG_TO_VA
+				contpc = (void *)
 					(xcp->cp0_epc +
 					(MIPSInst_SIMM(ir) << 2));
 
-				if (get_user(ir, (mips_instruction *)
-						REG_TO_VA xcp->cp0_epc)) {
-					fpuemuprivate.stats.errors++;
+				if (get_user(ir,
+				    (mips_instruction __user *) xcp->cp0_epc)) {
+					fpuemustats.errors++;
 					return SIGBUS;
 				}
 
 				switch (MIPSInst_OPCODE(ir)) {
 				case lwc1_op:
 				case swc1_op:
-#if (__mips >= 2 || __mips64) && !defined(SINGLE_ONLY_FPU)
+#if (__mips >= 2 || defined(__mips64))
 				case ldc1_op:
 				case sdc1_op:
 #endif
@@ -480,7 +463,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 				 * Single step the non-cp1
 				 * instruction in the dslot
 				 */
-				return mips_dsemul(xcp, ir, VA_TO_REG contpc);
+				return mips_dsemul(xcp, ir, (unsigned long) contpc);
 			}
 			else {
 				/* branch not taken */
@@ -539,8 +522,9 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx)
 	}
 
 	/* we did it !! */
-	xcp->cp0_epc = VA_TO_REG(contpc);
+	xcp->cp0_epc = (unsigned long) contpc;
 	xcp->cp0_cause &= ~CAUSEF_BD;
+
 	return 0;
 }
 
@@ -570,7 +554,7 @@ static const unsigned char cmptab[8] = {
 static ieee754##p fpemu_##p##_##name (ieee754##p r, ieee754##p s, \
     ieee754##p t) \
 { \
-	struct ieee754_csr ieee754_csr_save; \
+	struct _ieee754_csr ieee754_csr_save; \
 	s = f1 (s, t); \
 	ieee754_csr_save = ieee754_csr; \
 	s = f2 (s, r); \
@@ -616,54 +600,38 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 {
 	unsigned rcsr = 0;	/* resulting csr */
 
-	fpuemuprivate.stats.cp1xops++;
+	fpuemustats.cp1xops++;
 
 	switch (MIPSInst_FMA_FFMT(ir)) {
 	case s_fmt:{		/* 0 */
 
 		ieee754sp(*handler) (ieee754sp, ieee754sp, ieee754sp);
 		ieee754sp fd, fr, fs, ft;
-		u32 *va;
+		u32 __user *va;
 		u32 val;
 
 		switch (MIPSInst_FUNC(ir)) {
 		case lwxc1_op:
-			va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] +
+			va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
 				xcp->regs[MIPSInst_FT(ir)]);
 
-			fpuemuprivate.stats.loads++;
+			fpuemustats.loads++;
 			if (get_user(val, va)) {
-				fpuemuprivate.stats.errors++;
+				fpuemustats.errors++;
 				return SIGBUS;
 			}
-#ifdef SINGLE_ONLY_FPU
-			if (MIPSInst_FD(ir) & 1) {
-				/* illegal register in single-float
-				 * mode
-				 */
-				return SIGILL;
-			}
-#endif
 			SITOREG(val, MIPSInst_FD(ir));
 			break;
 
 		case swxc1_op:
-			va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] +
+			va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
 				xcp->regs[MIPSInst_FT(ir)]);
 
-			fpuemuprivate.stats.stores++;
-#ifdef SINGLE_ONLY_FPU
-			if (MIPSInst_FS(ir) & 1) {
-				/* illegal register in single-float
-				 * mode
-				 */
-				return SIGILL;
-			}
-#endif
+			fpuemustats.stores++;
 
 			SIFROMREG(val, MIPSInst_FS(ir));
 			if (put_user(val, va)) {
-				fpuemuprivate.stats.errors++;
+				fpuemustats.errors++;
 				return SIGBUS;
 			}
 			break;
@@ -699,8 +667,6 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 				rcsr |= FPU_CSR_INV_X | FPU_CSR_INV_S;
 
 			ctx->fcr31 = (ctx->fcr31 & ~FPU_CSR_ALL_X) | rcsr;
-			if (ieee754_csr.nod)
-				ctx->fcr31 |= 0x1000000;
 			if ((ctx->fcr31 >> 5) & ctx->fcr31 & FPU_CSR_ALL_E) {
 				/*printk ("SIGFPE: fpu csr = %08x\n",
 				   ctx->fcr31); */
@@ -715,34 +681,33 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 		break;
 	}
 
-#ifndef SINGLE_ONLY_FPU
 	case d_fmt:{		/* 1 */
 		ieee754dp(*handler) (ieee754dp, ieee754dp, ieee754dp);
 		ieee754dp fd, fr, fs, ft;
-		u64 *va;
+		u64 __user *va;
 		u64 val;
 
 		switch (MIPSInst_FUNC(ir)) {
 		case ldxc1_op:
-			va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] +
+			va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
 				xcp->regs[MIPSInst_FT(ir)]);
 
-			fpuemuprivate.stats.loads++;
+			fpuemustats.loads++;
 			if (get_user(val, va)) {
-				fpuemuprivate.stats.errors++;
+				fpuemustats.errors++;
 				return SIGBUS;
 			}
 			DITOREG(val, MIPSInst_FD(ir));
 			break;
 
 		case sdxc1_op:
-			va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] +
+			va = (void __user *) (xcp->regs[MIPSInst_FR(ir)] +
 				xcp->regs[MIPSInst_FT(ir)]);
 
-			fpuemuprivate.stats.stores++;
+			fpuemustats.stores++;
 			DIFROMREG(val, MIPSInst_FS(ir));
 			if (put_user(val, va)) {
-				fpuemuprivate.stats.errors++;
+				fpuemustats.errors++;
 				return SIGBUS;
 			}
 			break;
@@ -773,7 +738,6 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 		}
 		break;
 	}
-#endif
 
 	case 0x7:		/* 7 */
 		if (MIPSInst_FUNC(ir) != pfetch_op) {
@@ -810,7 +774,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 #endif
 	} rv;			/* resulting value */
 
-	fpuemuprivate.stats.cp1ops++;
+	fpuemustats.cp1ops++;
 	switch (rfmt = (MIPSInst_FFMT(ir) & 0xf)) {
 	case s_fmt:{		/* 0 */
 		union {
@@ -834,7 +798,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 			goto scopbop;
 
 			/* unary  ops */
-#if __mips >= 2 || __mips64
+#if __mips >= 2 || defined(__mips64)
 		case fsqrt_op:
 			handler.u = ieee754sp_sqrt;
 			goto scopuop;
@@ -913,9 +877,6 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 		case fcvts_op:
 			return SIGILL;	/* not defined */
 		case fcvtd_op:{
-#ifdef SINGLE_ONLY_FPU
-			return SIGILL;	/* not defined */
-#else
 			ieee754sp fs;
 
 			SPFROMREG(fs, MIPSInst_FS(ir));
@@ -923,7 +884,6 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 			rfmt = d_fmt;
 			goto copcsr;
 		}
-#endif
 		case fcvtw_op:{
 			ieee754sp fs;
 
@@ -933,7 +893,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 			goto copcsr;
 		}
 
-#if __mips >= 2 || __mips64
+#if __mips >= 2 || defined(__mips64)
 		case fround_op:
 		case ftrunc_op:
 		case fceil_op:
@@ -950,7 +910,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 		}
 #endif /* __mips >= 2 */
 
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
 		case fcvtl_op:{
 			ieee754sp fs;
 
@@ -974,7 +934,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 			rfmt = l_fmt;
 			goto copcsr;
 		}
-#endif /* __mips64 && !fpu(single) */
+#endif /* defined(__mips64) */
 
 		default:
 			if (MIPSInst_FUNC(ir) >= fcmp_op) {
@@ -1001,7 +961,6 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 		break;
 	}
 
-#ifndef SINGLE_ONLY_FPU
 	case d_fmt:{
 		union {
 			ieee754dp(*b) (ieee754dp, ieee754dp);
@@ -1024,7 +983,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 			goto dcopbop;
 
 			/* unary  ops */
-#if __mips >= 2 || __mips64
+#if __mips >= 2 || defined(__mips64)
 		case fsqrt_op:
 			handler.u = ieee754dp_sqrt;
 			goto dcopuop;
@@ -1108,7 +1067,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 			goto copcsr;
 		}
 
-#if __mips >= 2 || __mips64
+#if __mips >= 2 || defined(__mips64)
 		case fround_op:
 		case ftrunc_op:
 		case fceil_op:
@@ -1125,7 +1084,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 		}
 #endif
 
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
 		case fcvtl_op:{
 			ieee754dp fs;
 
@@ -1149,7 +1108,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 			rfmt = l_fmt;
 			goto copcsr;
 		}
-#endif /* __mips >= 3 && !fpu(single) */
+#endif /* __mips >= 3 */
 
 		default:
 			if (MIPSInst_FUNC(ir) >= fcmp_op) {
@@ -1177,7 +1136,6 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 		}
 		break;
 	}
-#endif /* ifndef SINGLE_ONLY_FPU */
 
 	case w_fmt:{
 		ieee754sp fs;
@@ -1189,21 +1147,19 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 			rv.s = ieee754sp_fint(fs.bits);
 			rfmt = s_fmt;
 			goto copcsr;
-#ifndef SINGLE_ONLY_FPU
 		case fcvtd_op:
 			/* convert word to double precision real */
 			SPFROMREG(fs, MIPSInst_FS(ir));
 			rv.d = ieee754dp_fint(fs.bits);
 			rfmt = d_fmt;
 			goto copcsr;
-#endif
 		default:
 			return SIGILL;
 		}
 		break;
 	}
 
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
 	case l_fmt:{
 		switch (MIPSInst_FUNC(ir)) {
 		case fcvts_op:
@@ -1256,18 +1212,16 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 			ctx->fcr31 &= ~cond;
 		break;
 	}
-#ifndef SINGLE_ONLY_FPU
 	case d_fmt:
 		DPTOREG(rv.d, MIPSInst_FD(ir));
 		break;
-#endif
 	case s_fmt:
 		SPTOREG(rv.s, MIPSInst_FD(ir));
 		break;
 	case w_fmt:
 		SITOREG(rv.w, MIPSInst_FD(ir));
 		break;
-#if defined(__mips64) && !defined(SINGLE_ONLY_FPU)
+#if defined(__mips64)
 	case l_fmt:
 		DITOREG(rv.l, MIPSInst_FD(ir));
 		break;
@@ -1279,10 +1233,10 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx,
 	return 0;
 }
 
-int fpu_emulator_cop1Handler(int xcptno, struct pt_regs *xcp,
+int fpu_emulator_cop1Handler(struct pt_regs *xcp,
 	struct mips_fpu_soft_struct *ctx)
 {
-	gpreg_t oldepc, prevepc;
+	unsigned long oldepc, prevepc;
 	mips_instruction insn;
 	int sig = 0;
 
@@ -1290,19 +1244,24 @@ int fpu_emulator_cop1Handler(int xcptno, struct pt_regs *xcp,
 	do {
 		prevepc = xcp->cp0_epc;
 
-		if (get_user(insn, (mips_instruction *) xcp->cp0_epc)) {
-			fpuemuprivate.stats.errors++;
+		if (get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
+			fpuemustats.errors++;
 			return SIGBUS;
 		}
 		if (insn == 0)
 			xcp->cp0_epc += 4;	/* skip nops */
 		else {
-			/* Update ieee754_csr. Only relevant if we have a
-			   h/w FPU */
-			ieee754_csr.nod = (ctx->fcr31 & 0x1000000) != 0;
-			ieee754_csr.rm = ieee_rm[ctx->fcr31 & 0x3];
-			ieee754_csr.cx = (ctx->fcr31 >> 12) & 0x1f;
+			/*
+			 * The 'ieee754_csr' is an alias of
+			 * ctx->fcr31.  No need to copy ctx->fcr31 to
+			 * ieee754_csr.  But ieee754_csr.rm is ieee
+			 * library modes. (not mips rounding mode)
+			 */
+			/* convert to ieee library modes */
+			ieee754_csr.rm = ieee_rm[ieee754_csr.rm];
 			sig = cop1Emulate(xcp, ctx);
+			/* revert to mips rounding mode */
+			ieee754_csr.rm = mips_rm[ieee754_csr.rm];
 		}
 
 		if (cpu_has_fpu)
diff --git a/arch/mips/math-emu/dp_sqrt.c b/arch/mips/math-emu/dp_sqrt.c
index c35e871ae975..032328c49888 100644
--- a/arch/mips/math-emu/dp_sqrt.c
+++ b/arch/mips/math-emu/dp_sqrt.c
@@ -37,7 +37,7 @@ static const unsigned table[] = {
 
 ieee754dp ieee754dp_sqrt(ieee754dp x)
 {
-	struct ieee754_csr oldcsr;
+	struct _ieee754_csr oldcsr;
 	ieee754dp y, z, t;
 	unsigned scalx, yh;
 	COMPXDP;
diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c
index aa989c2246da..8079f3d1eca0 100644
--- a/arch/mips/math-emu/dsemul.c
+++ b/arch/mips/math-emu/dsemul.c
@@ -28,9 +28,6 @@
 #endif
 #define __mips 4
 
-extern struct mips_fpu_emulator_private fpuemuprivate;
-
-
 /*
  * Emulate the arbritrary instruction ir at xcp->cp0_epc.  Required when
  * we have to emulate the instruction in a COP1 branch delay slot.  Do
@@ -52,10 +49,10 @@ struct emuframe {
 	mips_instruction	emul;
 	mips_instruction	badinst;
 	mips_instruction	cookie;
-	gpreg_t			epc;
+	unsigned long		epc;
 };
 
-int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc)
+int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
 {
 	extern asmlinkage void handle_dsemulret(void);
 	mips_instruction *dsemul_insns;
@@ -91,7 +88,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc)
 	 */
 
 	/* Ensure that the two instructions are in the same cache line */
-	dsemul_insns = (mips_instruction *) REG_TO_VA ((regs->regs[29] - sizeof(struct emuframe)) & ~0x7);
+	dsemul_insns = (mips_instruction *) ((regs->regs[29] - sizeof(struct emuframe)) & ~0x7);
 	fr = (struct emuframe *) dsemul_insns;
 
 	/* Verify that the stack pointer is not competely insane */
@@ -104,11 +101,11 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc)
 	err |= __put_user(cpc, &fr->epc);
 
 	if (unlikely(err)) {
-		fpuemuprivate.stats.errors++;
+		fpuemustats.errors++;
 		return SIGBUS;
 	}
 
-	regs->cp0_epc = VA_TO_REG & fr->emul;
+	regs->cp0_epc = (unsigned long) &fr->emul;
 
 	flush_cache_sigtramp((unsigned long)&fr->badinst);
 
@@ -118,7 +115,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc)
 int do_dsemulret(struct pt_regs *xcp)
 {
 	struct emuframe *fr;
-	gpreg_t epc;
+	unsigned long epc;
 	u32 insn, cookie;
 	int err = 0;
 
@@ -141,7 +138,7 @@ int do_dsemulret(struct pt_regs *xcp)
 	err |= __get_user(cookie, &fr->cookie);
 
 	if (unlikely(err || (insn != BADINST) || (cookie != BD_COOKIE))) {
-		fpuemuprivate.stats.errors++;
+		fpuemustats.errors++;
 		return 0;
 	}
 
diff --git a/arch/mips/math-emu/dsemul.h b/arch/mips/math-emu/dsemul.h
index dbd85f95268d..091f0e76730f 100644
--- a/arch/mips/math-emu/dsemul.h
+++ b/arch/mips/math-emu/dsemul.h
@@ -1,11 +1,5 @@
-typedef long gpreg_t;
-typedef void *vaddr_t;
-
-#define REG_TO_VA (vaddr_t)
-#define VA_TO_REG (gpreg_t)
-
-int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc);
-int do_dsemulret(struct pt_regs *xcp);
+extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc);
+extern int do_dsemulret(struct pt_regs *xcp);
 
 /* Instruction which will always cause an address error */
 #define AdELOAD 0x8c000001	/* lw $0,1($0) */
diff --git a/arch/mips/math-emu/ieee754.c b/arch/mips/math-emu/ieee754.c
index f0a364adbf34..a93c45dbdefd 100644
--- a/arch/mips/math-emu/ieee754.c
+++ b/arch/mips/math-emu/ieee754.c
@@ -31,6 +31,8 @@
 
 
 #include "ieee754int.h"
+#include "ieee754sp.h"
+#include "ieee754dp.h"
 
 #define DP_EBIAS	1023
 #define DP_EMIN		(-1022)
@@ -40,20 +42,6 @@
 #define SP_EMIN		(-126)
 #define SP_EMAX		127
 
-/* indexed by class */
-const char *const ieee754_cname[] = {
-	"Normal",
-	"Zero",
-	"Denormal",
-	"Infinity",
-	"QNaN",
-	"SNaN",
-};
-
-/* the control status register
-*/
-struct ieee754_csr ieee754_csr;
-
 /* special constants
 */
 
diff --git a/arch/mips/math-emu/ieee754.h b/arch/mips/math-emu/ieee754.h
index b8772f46972d..171f177c0f88 100644
--- a/arch/mips/math-emu/ieee754.h
+++ b/arch/mips/math-emu/ieee754.h
@@ -1,13 +1,8 @@
-/* single and double precision fp ops
- * missing extended precision.
-*/
 /*
  * MIPS floating point support
  * Copyright (C) 1994-2000 Algorithmics Ltd.
  * http://www.algor.co.uk
  *
- * ########################################################################
- *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
  *  published by the Free Software Foundation.
@@ -21,20 +16,18 @@
  *  with this program; if not, write to the Free Software Foundation, Inc.,
  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  *
- * ########################################################################
- */
-
-/**************************************************************************
  *  Nov 7, 2000
  *  Modification to allow integration with Linux kernel
  *
  *  Kevin D. Kissell, kevink@mips.com and Carsten Langgard, carstenl@mips.com
  *  Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- *************************************************************************/
+ */
+#ifndef __ARCH_MIPS_MATH_EMU_IEEE754_H
+#define __ARCH_MIPS_MATH_EMU_IEEE754_H
 
-#ifdef __KERNEL__
-/* Going from Algorithmics to Linux native environment, add this */
+#include <asm/byteorder.h>
 #include <linux/types.h>
+#include <linux/sched.h>
 
 /*
  * Not very pretty, but the Linux kernel's normal va_list definition
@@ -44,18 +37,7 @@
 #include <stdarg.h>
 #endif
 
-#else
-
-/* Note that __KERNEL__ is taken to mean Linux kernel */
-
-#if #system(OpenBSD)
-#include <machine/types.h>
-#endif
-#include <machine/endian.h>
-
-#endif				/* __KERNEL__ */
-
-#if (defined(BYTE_ORDER) && BYTE_ORDER == LITTLE_ENDIAN) || defined(__MIPSEL__)
+#ifdef __LITTLE_ENDIAN
 struct ieee754dp_konst {
 	unsigned mantlo:32;
 	unsigned manthi:20;
@@ -86,13 +68,14 @@ typedef union _ieee754sp {
 } ieee754sp;
 #endif
 
-#if (defined(BYTE_ORDER) && BYTE_ORDER == BIG_ENDIAN) || defined(__MIPSEB__)
+#ifdef __BIG_ENDIAN
 struct ieee754dp_konst {
 	unsigned sign:1;
 	unsigned bexp:11;
 	unsigned manthi:20;
 	unsigned mantlo:32;
 };
+
 typedef union _ieee754dp {
 	struct ieee754dp_konst oparts;
 	struct {
@@ -222,7 +205,6 @@ ieee754dp ieee754dp_sqrt(ieee754dp x);
 #define IEEE754_CLASS_INF	0x03
 #define IEEE754_CLASS_SNAN	0x04
 #define IEEE754_CLASS_QNAN	0x05
-extern const char *const ieee754_cname[];
 
 /* exception numbers */
 #define IEEE754_INEXACT			0x01
@@ -251,93 +233,109 @@ extern const char *const ieee754_cname[];
 
 /* "normal" comparisons
 */
-static __inline int ieee754sp_eq(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_eq(ieee754sp x, ieee754sp y)
 {
 	return ieee754sp_cmp(x, y, IEEE754_CEQ, 0);
 }
 
-static __inline int ieee754sp_ne(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_ne(ieee754sp x, ieee754sp y)
 {
 	return ieee754sp_cmp(x, y,
 			     IEEE754_CLT | IEEE754_CGT | IEEE754_CUN, 0);
 }
 
-static __inline int ieee754sp_lt(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_lt(ieee754sp x, ieee754sp y)
 {
 	return ieee754sp_cmp(x, y, IEEE754_CLT, 0);
 }
 
-static __inline int ieee754sp_le(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_le(ieee754sp x, ieee754sp y)
 {
 	return ieee754sp_cmp(x, y, IEEE754_CLT | IEEE754_CEQ, 0);
 }
 
-static __inline int ieee754sp_gt(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_gt(ieee754sp x, ieee754sp y)
 {
 	return ieee754sp_cmp(x, y, IEEE754_CGT, 0);
 }
 
 
-static __inline int ieee754sp_ge(ieee754sp x, ieee754sp y)
+static inline int ieee754sp_ge(ieee754sp x, ieee754sp y)
 {
 	return ieee754sp_cmp(x, y, IEEE754_CGT | IEEE754_CEQ, 0);
 }
 
-static __inline int ieee754dp_eq(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_eq(ieee754dp x, ieee754dp y)
 {
 	return ieee754dp_cmp(x, y, IEEE754_CEQ, 0);
 }
 
-static __inline int ieee754dp_ne(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_ne(ieee754dp x, ieee754dp y)
 {
 	return ieee754dp_cmp(x, y,
 			     IEEE754_CLT | IEEE754_CGT | IEEE754_CUN, 0);
 }
 
-static __inline int ieee754dp_lt(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_lt(ieee754dp x, ieee754dp y)
 {
 	return ieee754dp_cmp(x, y, IEEE754_CLT, 0);
 }
 
-static __inline int ieee754dp_le(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_le(ieee754dp x, ieee754dp y)
 {
 	return ieee754dp_cmp(x, y, IEEE754_CLT | IEEE754_CEQ, 0);
 }
 
-static __inline int ieee754dp_gt(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_gt(ieee754dp x, ieee754dp y)
 {
 	return ieee754dp_cmp(x, y, IEEE754_CGT, 0);
 }
 
-static __inline int ieee754dp_ge(ieee754dp x, ieee754dp y)
+static inline int ieee754dp_ge(ieee754dp x, ieee754dp y)
 {
 	return ieee754dp_cmp(x, y, IEEE754_CGT | IEEE754_CEQ, 0);
 }
 
 
-/* like strtod
-*/
+/*
+ * Like strtod
+ */
 ieee754dp ieee754dp_fstr(const char *s, char **endp);
 char *ieee754dp_tstr(ieee754dp x, int prec, int fmt, int af);
 
 
-/* the control status register
-*/
-struct ieee754_csr {
-	unsigned pad:13;
+/*
+ * The control status register
+ */
+struct _ieee754_csr {
+#ifdef __BIG_ENDIAN
+	unsigned pad0:7;
 	unsigned nod:1;		/* set 1 for no denormalised numbers */
-	unsigned cx:5;		/* exceptions this operation */
+	unsigned c:1;		/* condition */
+	unsigned pad1:5;
+	unsigned cx:6;		/* exceptions this operation */
 	unsigned mx:5;		/* exception enable  mask */
 	unsigned sx:5;		/* exceptions total */
 	unsigned rm:2;		/* current rounding mode */
+#endif
+#ifdef __LITTLE_ENDIAN
+	unsigned rm:2;		/* current rounding mode */
+	unsigned sx:5;		/* exceptions total */
+	unsigned mx:5;		/* exception enable  mask */
+	unsigned cx:6;		/* exceptions this operation */
+	unsigned pad1:5;
+	unsigned c:1;		/* condition */
+	unsigned nod:1;		/* set 1 for no denormalised numbers */
+	unsigned pad0:7;
+#endif
 };
-extern struct ieee754_csr ieee754_csr;
+#define ieee754_csr (*(struct _ieee754_csr *)(&current->thread.fpu.soft.fcr31))
 
-static __inline unsigned ieee754_getrm(void)
+static inline unsigned ieee754_getrm(void)
 {
 	return (ieee754_csr.rm);
 }
-static __inline unsigned ieee754_setrm(unsigned rm)
+static inline unsigned ieee754_setrm(unsigned rm)
 {
 	return (ieee754_csr.rm = rm);
 }
@@ -345,14 +343,14 @@ static __inline unsigned ieee754_setrm(unsigned rm)
 /*
  * get current exceptions
  */
-static __inline unsigned ieee754_getcx(void)
+static inline unsigned ieee754_getcx(void)
 {
 	return (ieee754_csr.cx);
 }
 
 /* test for current exception condition
  */
-static __inline int ieee754_cxtest(unsigned n)
+static inline int ieee754_cxtest(unsigned n)
 {
 	return (ieee754_csr.cx & n);
 }
@@ -360,21 +358,21 @@ static __inline int ieee754_cxtest(unsigned n)
 /*
  * get sticky exceptions
  */
-static __inline unsigned ieee754_getsx(void)
+static inline unsigned ieee754_getsx(void)
 {
 	return (ieee754_csr.sx);
 }
 
 /* clear sticky conditions
 */
-static __inline unsigned ieee754_clrsx(void)
+static inline unsigned ieee754_clrsx(void)
 {
 	return (ieee754_csr.sx = 0);
 }
 
 /* test for sticky exception condition
  */
-static __inline int ieee754_sxtest(unsigned n)
+static inline int ieee754_sxtest(unsigned n)
 {
 	return (ieee754_csr.sx & n);
 }
@@ -406,52 +404,34 @@ extern const struct ieee754sp_konst __ieee754sp_spcvals[];
 #define ieee754dp_spcvals ((const ieee754dp *)__ieee754dp_spcvals)
 #define ieee754sp_spcvals ((const ieee754sp *)__ieee754sp_spcvals)
 
-/* return infinity with given sign
-*/
-#define ieee754dp_inf(sn)	\
-  (ieee754dp_spcvals[IEEE754_SPCVAL_PINFINITY+(sn)])
-#define ieee754dp_zero(sn) \
-  (ieee754dp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
-#define ieee754dp_one(sn) \
-  (ieee754dp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
-#define ieee754dp_ten(sn) \
-  (ieee754dp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
-#define ieee754dp_indef() \
-  (ieee754dp_spcvals[IEEE754_SPCVAL_INDEF])
-#define ieee754dp_max(sn) \
-  (ieee754dp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
-#define ieee754dp_min(sn) \
-  (ieee754dp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
-#define ieee754dp_mind(sn) \
-  (ieee754dp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
-#define ieee754dp_1e31() \
-  (ieee754dp_spcvals[IEEE754_SPCVAL_P1E31])
-#define ieee754dp_1e63() \
-  (ieee754dp_spcvals[IEEE754_SPCVAL_P1E63])
-
-#define ieee754sp_inf(sn) \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_PINFINITY+(sn)])
-#define ieee754sp_zero(sn) \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
-#define ieee754sp_one(sn) \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
-#define ieee754sp_ten(sn) \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
-#define ieee754sp_indef() \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_INDEF])
-#define ieee754sp_max(sn) \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
-#define ieee754sp_min(sn) \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
-#define ieee754sp_mind(sn) \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
-#define ieee754sp_1e31() \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_P1E31])
-#define ieee754sp_1e63() \
-  (ieee754sp_spcvals[IEEE754_SPCVAL_P1E63])
-
-/* indefinite integer value
-*/
+/*
+ * Return infinity with given sign
+ */
+#define ieee754dp_inf(sn)     (ieee754dp_spcvals[IEEE754_SPCVAL_PINFINITY+(sn)])
+#define ieee754dp_zero(sn)	(ieee754dp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
+#define ieee754dp_one(sn)	(ieee754dp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
+#define ieee754dp_ten(sn)	(ieee754dp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
+#define ieee754dp_indef()	(ieee754dp_spcvals[IEEE754_SPCVAL_INDEF])
+#define ieee754dp_max(sn)	(ieee754dp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
+#define ieee754dp_min(sn)	(ieee754dp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
+#define ieee754dp_mind(sn)	(ieee754dp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
+#define ieee754dp_1e31()	(ieee754dp_spcvals[IEEE754_SPCVAL_P1E31])
+#define ieee754dp_1e63()	(ieee754dp_spcvals[IEEE754_SPCVAL_P1E63])
+
+#define ieee754sp_inf(sn)     (ieee754sp_spcvals[IEEE754_SPCVAL_PINFINITY+(sn)])
+#define ieee754sp_zero(sn)	(ieee754sp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
+#define ieee754sp_one(sn)	(ieee754sp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
+#define ieee754sp_ten(sn)	(ieee754sp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
+#define ieee754sp_indef()	(ieee754sp_spcvals[IEEE754_SPCVAL_INDEF])
+#define ieee754sp_max(sn)	(ieee754sp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
+#define ieee754sp_min(sn)	(ieee754sp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
+#define ieee754sp_mind(sn)	(ieee754sp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
+#define ieee754sp_1e31()	(ieee754sp_spcvals[IEEE754_SPCVAL_P1E31])
+#define ieee754sp_1e63()	(ieee754sp_spcvals[IEEE754_SPCVAL_P1E63])
+
+/*
+ * Indefinite integer value
+ */
 #define ieee754si_indef()	INT_MAX
 #ifdef LONG_LONG_MAX
 #define ieee754di_indef()	LONG_LONG_MAX
@@ -487,3 +467,5 @@ extern void ieee754_xcpt(struct ieee754xctx *xcp);
 /* compat */
 #define ieee754dp_fix(x)	ieee754dp_tint(x)
 #define ieee754sp_fix(x)	ieee754sp_tint(x)
+
+#endif /* __ARCH_MIPS_MATH_EMU_IEEE754_H */
diff --git a/arch/mips/math-emu/kernel_linkage.c b/arch/mips/math-emu/kernel_linkage.c
index 4002f0cf79f3..d187ab71c2ff 100644
--- a/arch/mips/math-emu/kernel_linkage.c
+++ b/arch/mips/math-emu/kernel_linkage.c
@@ -27,8 +27,6 @@
 
 #include <asm/fpu_emulator.h>
 
-extern struct mips_fpu_emulator_private fpuemuprivate;
-
 #define SIGNALLING_NAN 0x7ff800007ff80000LL
 
 void fpu_emulator_init_fpu(void)
@@ -65,7 +63,6 @@ int fpu_emulator_save_context(struct sigcontext *sc)
 			       &sc->sc_fpregs[i]);
 	}
 	err |= __put_user(current->thread.fpu.soft.fcr31, &sc->sc_fpc_csr);
-	err |= __put_user(fpuemuprivate.eir, &sc->sc_fpc_eir);
 
 	return err;
 }
@@ -81,7 +78,6 @@ int fpu_emulator_restore_context(struct sigcontext *sc)
 			       &sc->sc_fpregs[i]);
 	}
 	err |= __get_user(current->thread.fpu.soft.fcr31, &sc->sc_fpc_csr);
-	err |= __get_user(fpuemuprivate.eir, &sc->sc_fpc_eir);
 
 	return err;
 }
@@ -102,7 +98,6 @@ int fpu_emulator_save_context32(struct sigcontext32 *sc)
 			       &sc->sc_fpregs[i]);
 	}
 	err |= __put_user(current->thread.fpu.soft.fcr31, &sc->sc_fpc_csr);
-	err |= __put_user(fpuemuprivate.eir, &sc->sc_fpc_eir);
 
 	return err;
 }
@@ -118,7 +113,6 @@ int fpu_emulator_restore_context32(struct sigcontext32 *sc)
 			       &sc->sc_fpregs[i]);
 	}
 	err |= __get_user(current->thread.fpu.soft.fcr31, &sc->sc_fpc_csr);
-	err |= __get_user(fpuemuprivate.eir, &sc->sc_fpc_eir);
 
 	return err;
 }
diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c
index 19d4b0792460..bc0ebc69bfb3 100644
--- a/arch/mips/mips-boards/atlas/atlas_int.c
+++ b/arch/mips/mips-boards/atlas/atlas_int.c
@@ -76,14 +76,13 @@ static void end_atlas_irq(unsigned int irq)
 }
 
 static struct hw_interrupt_type atlas_irq_type = {
-	"Atlas",
-	startup_atlas_irq,
-	shutdown_atlas_irq,
-	enable_atlas_irq,
-	disable_atlas_irq,
-	mask_and_ack_atlas_irq,
-	end_atlas_irq,
-	NULL
+	.typename = "Atlas",
+	.startup = startup_atlas_irq,
+	.shutdown = shutdown_atlas_irq,
+	.enable = enable_atlas_irq,
+	.disable = disable_atlas_irq,
+	.ack = mask_and_ack_atlas_irq,
+	.end = end_atlas_irq,
 };
 
 static inline int ls1bit32(unsigned int x)
diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c
index 0a1dd9bbc02e..625843b30bed 100644
--- a/arch/mips/mips-boards/atlas/atlas_setup.c
+++ b/arch/mips/mips-boards/atlas/atlas_setup.c
@@ -50,8 +50,10 @@ const char *get_system_type(void)
 	return "MIPS Atlas";
 }
 
-static int __init atlas_setup(void)
+void __init plat_setup(void)
 {
+	mips_pcibios_init();
+
 	ioport_resource.end = 0x7fffffff;
 
 	serial_init ();
@@ -64,12 +66,8 @@ static int __init atlas_setup(void)
 	board_time_init = mips_time_init;
 	board_timer_setup = mips_timer_setup;
 	rtc_get_time = mips_rtc_get_time;
-
-	return 0;
 }
 
-early_initcall(atlas_setup);
-
 static void __init serial_init(void)
 {
 #ifdef CONFIG_SERIAL_8250
diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c
index 311155d1d3ed..eab5a705e989 100644
--- a/arch/mips/mips-boards/generic/init.c
+++ b/arch/mips/mips-boards/generic/init.c
@@ -1,6 +1,8 @@
 /*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 1999, 2000, 2004, 2005  MIPS Technologies, Inc.
+ *	All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
  *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
@@ -22,18 +24,19 @@
 #include <linux/string.h>
 #include <linux/kernel.h>
 
-#include <asm/io.h>
 #include <asm/bootinfo.h>
+#include <asm/gt64120.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/cacheflush.h>
+#include <asm/traps.h>
+
 #include <asm/mips-boards/prom.h>
 #include <asm/mips-boards/generic.h>
-#ifdef CONFIG_MIPS_GT64120
-#include <asm/gt64120.h>
-#endif
-#include <asm/mips-boards/msc01_pci.h>
 #include <asm/mips-boards/bonito64.h>
-#ifdef CONFIG_MIPS_MALTA
+#include <asm/mips-boards/msc01_pci.h>
+
 #include <asm/mips-boards/malta.h>
-#endif
 
 #ifdef CONFIG_KGDB
 extern int rs_kgdb_hook(int, int);
@@ -223,8 +226,34 @@ void __init kgdb_config (void)
 }
 #endif
 
+void __init mips_nmi_setup (void)
+{
+	void *base;
+	extern char except_vec_nmi;
+
+	base = cpu_has_veic ?
+		(void *)(CAC_BASE + 0xa80) :
+		(void *)(CAC_BASE + 0x380);
+	memcpy(base, &except_vec_nmi, 0x80);
+	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
+}
+
+void __init mips_ejtag_setup (void)
+{
+	void *base;
+	extern char except_vec_ejtag_debug;
+
+	base = cpu_has_veic ?
+		(void *)(CAC_BASE + 0xa00) :
+		(void *)(CAC_BASE + 0x300);
+	memcpy(base, &except_vec_ejtag_debug, 0x80);
+	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
+}
+
 void __init prom_init(void)
 {
+	u32 start, map, mask, data;
+
 	prom_argc = fw_arg0;
 	_prom_argv = (int *) fw_arg1;
 	_prom_envp = (int *) fw_arg2;
@@ -266,12 +295,15 @@ void __init prom_init(void)
 #else
 		GT_WRITE(GT_PCI0_CMD_OFS, 0);
 #endif
+		/* Fix up PCI I/O mapping if necessary (for Atlas).  */
+		start = GT_READ(GT_PCI0IOLD_OFS);
+		map = GT_READ(GT_PCI0IOREMAP_OFS);
+		if ((start & map) != 0) {
+			map &= ~start;
+			GT_WRITE(GT_PCI0IOREMAP_OFS, map);
+		}
 
-#ifdef CONFIG_MIPS_MALTA
 		set_io_port_base(MALTA_GT_PORT_BASE);
-#else
-		set_io_port_base((unsigned long)ioremap(0, 0x20000000));
-#endif
 		break;
 
 	case MIPS_REVISION_CORID_CORE_EMUL_BON:
@@ -300,18 +332,21 @@ void __init prom_init(void)
 			BONITO_BONGENCFG_BYTESWAP;
 #endif
 
-#ifdef CONFIG_MIPS_MALTA
 		set_io_port_base(MALTA_BONITO_PORT_BASE);
-#else
-		set_io_port_base((unsigned long)ioremap(0, 0x20000000));
-#endif
 		break;
 
 	case MIPS_REVISION_CORID_CORE_MSC:
 	case MIPS_REVISION_CORID_CORE_FPGA2:
+	case MIPS_REVISION_CORID_CORE_FPGA3:
 	case MIPS_REVISION_CORID_CORE_EMUL_MSC:
 		_pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000);
 
+		mb();
+		MSC_READ(MSC01_PCI_CFG, data);
+		MSC_WRITE(MSC01_PCI_CFG, data & ~MSC01_PCI_CFG_EN_BIT);
+		wmb();
+
+		/* Fix up lane swapping.  */
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
 		MSC_WRITE(MSC01_PCI_SWAP, MSC01_PCI_SWAP_NOSWAP);
 #else
@@ -320,12 +355,23 @@ void __init prom_init(void)
 			  MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_MEM_SHF |
 			  MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_BAR0_SHF);
 #endif
+		/* Fix up target memory mapping.  */
+		MSC_READ(MSC01_PCI_BAR0, mask);
+		MSC_WRITE(MSC01_PCI_P2SCMSKL, mask & MSC01_PCI_BAR0_SIZE_MSK);
+
+		/* Don't handle target retries indefinitely.  */
+		if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) ==
+		    MSC01_PCI_CFG_MAXRTRY_MSK)
+			data = (data & ~(MSC01_PCI_CFG_MAXRTRY_MSK <<
+					 MSC01_PCI_CFG_MAXRTRY_SHF)) |
+			       ((MSC01_PCI_CFG_MAXRTRY_MSK - 1) <<
+				MSC01_PCI_CFG_MAXRTRY_SHF);
+
+		wmb();
+		MSC_WRITE(MSC01_PCI_CFG, data);
+		mb();
 
-#ifdef CONFIG_MIPS_MALTA
 		set_io_port_base(MALTA_MSC_PORT_BASE);
-#else
-		set_io_port_base((unsigned long)ioremap(0, 0x20000000));
-#endif
 		break;
 
 	default:
@@ -334,6 +380,9 @@ void __init prom_init(void)
 		while(1);   /* We die here... */
 	}
 #endif
+	board_nmi_handler_setup = mips_nmi_setup;
+	board_ejtag_handler_setup = mips_ejtag_setup;
+
 	prom_printf("\nLINUX started...\n");
 	prom_init_cmdline();
 	prom_meminit();
diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c
index 5ae2b43e4c2e..2c8afd77a20b 100644
--- a/arch/mips/mips-boards/generic/memory.c
+++ b/arch/mips/mips-boards/generic/memory.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/bootmem.h>
+#include <linux/string.h>
 
 #include <asm/bootinfo.h>
 #include <asm/page.h>
@@ -55,18 +56,30 @@ struct prom_pmemblock * __init prom_getmdesc(void)
 {
 	char *memsize_str;
 	unsigned int memsize;
+	char cmdline[CL_SIZE], *ptr;
 
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str) {
-		prom_printf("memsize not set in boot prom, set to default (32Mb)\n");
-		memsize = 0x02000000;
-	} else {
+	/* Check the command line first for a memsize directive */
+	strcpy(cmdline, arcs_cmdline);
+	ptr = strstr(cmdline, "memsize=");
+	if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
+		ptr = strstr(ptr, " memsize=");
+
+	if (ptr) {
+		memsize = memparse(ptr + 8, &ptr);
+	}
+	else {
+		/* otherwise look in the environment */
+		memsize_str = prom_getenv("memsize");
+		if (!memsize_str) {
+			prom_printf("memsize not set in boot prom, set to default (32Mb)\n");
+			memsize = 0x02000000;
+		} else {
 #ifdef DEBUG
-		prom_printf("prom_memsize = %s\n", memsize_str);
+			prom_printf("prom_memsize = %s\n", memsize_str);
 #endif
-		memsize = simple_strtol(memsize_str, NULL, 0);
+			memsize = simple_strtol(memsize_str, NULL, 0);
+		}
 	}
-
 	memset(mdesc, 0, sizeof(mdesc));
 
 	mdesc[0].type = yamon_dontuse;
diff --git a/arch/mips/mips-boards/generic/mipsIRQ.S b/arch/mips/mips-boards/generic/mipsIRQ.S
index 131f49bccb20..a397ecb872d6 100644
--- a/arch/mips/mips-boards/generic/mipsIRQ.S
+++ b/arch/mips/mips-boards/generic/mipsIRQ.S
@@ -29,6 +29,20 @@
 #include <asm/regdef.h>
 #include <asm/stackframe.h>
 
+#ifdef CONFIG_MIPS_ATLAS
+#include <asm/mips-boards/atlasint.h>
+#define CASCADE_IRQ		MIPSCPU_INT_ATLAS
+#define CASCADE_DISPATCH	atlas_hw0_irqdispatch
+#endif
+#ifdef CONFIG_MIPS_MALTA
+#include <asm/mips-boards/maltaint.h>
+#define CASCADE_IRQ		MIPSCPU_INT_I8259A
+#define CASCADE_DISPATCH	malta_hw0_irqdispatch
+#endif
+#ifdef CONFIG_MIPS_SEAD
+#include <asm/mips-boards/seadint.h>
+#endif
+
 /* A lot of complication here is taken away because:
  *
  * 1) We handle one interrupt and return, sitting in a loop and moving across
@@ -80,74 +94,62 @@
 
 	mfc0	s0, CP0_CAUSE		# get irq bits
 	mfc0	s1, CP0_STATUS		# get irq mask
+	andi	s0, ST0_IM		# CAUSE.CE may be non-zero!
 	and	s0, s1
 
-	/* First we check for r4k counter/timer IRQ. */
-	andi	a0, s0, CAUSEF_IP7
-	beq	a0, zero, 1f
-	 andi	a0, s0, CAUSEF_IP2	# delay slot, check hw0 interrupt
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+ 	.set	mips32
+	clz	a0, s0
+	.set	mips0
+	negu	a0
+	addu	a0, 31-CAUSEB_IP
+	bltz	a0, spurious
+#else
+	beqz	s0, spurious
+	 li	a0, 7
 
-	/* Wheee, a timer interrupt. */
-	move	a0, sp
-	jal	mips_timer_interrupt
-	 nop
+	and	t0, s0, 0xf000
+	sltiu	t0, t0, 1
+	sll	t0, 2
+	subu	a0, t0
+	sll	s0, t0
 
-	j	ret_from_irq
-	 nop
+	and	t0, s0, 0xc000
+	sltiu	t0, t0, 1
+	sll	t0, 1
+	subu	a0, t0
+	sll	s0, t0
 
-1:
-#if defined(CONFIG_MIPS_SEAD)
-	beq	a0, zero, 1f
-	 andi	a0, s0, CAUSEF_IP3	# delay slot, check hw1 interrupt
-#else
-	beq	a0, zero, 1f		# delay slot, check hw3 interrupt
- 	 andi	a0, s0, CAUSEF_IP5
+	and	t0, s0, 0x8000
+	sltiu	t0, t0, 1
+	# sll	t0, 0
+	subu	a0, t0
+	# sll	s0, t0
 #endif
 
-	/* Wheee, combined hardware level zero interrupt. */
-#if defined(CONFIG_MIPS_ATLAS)
-	jal	atlas_hw0_irqdispatch
-#elif defined(CONFIG_MIPS_MALTA)
-	jal	malta_hw0_irqdispatch
-#elif defined(CONFIG_MIPS_SEAD)
-	jal	sead_hw0_irqdispatch
-#else
-#error "MIPS board not supported\n"
-#endif
-	 move	a0, sp			# delay slot
+#ifdef CASCADE_IRQ
+	 li	a1, CASCADE_IRQ
+	bne	a0, a1, 1f
+	 addu	a0, MIPSCPU_INT_BASE
 
-	j	ret_from_irq
-	 nop				# delay slot
+	jal	CASCADE_DISPATCH
+	 move	 a0, sp
 
-1:
-#if defined(CONFIG_MIPS_SEAD)
-	beq	a0, zero, 1f
-	 andi	a0, s0, CAUSEF_IP5	# delay slot, check hw3 interrupt
-	jal	sead_hw1_irqdispatch
-	 move	a0, sp			# delay slot
-	j	ret_from_irq
-	 nop				# delay slot
-1:
-#endif
-#if defined(CONFIG_MIPS_MALTA)
-	beq	a0, zero, 1f            # check hw3 (coreHI) interrupt
-	 nop
-	jal	corehi_irqdispatch
-	 move	a0, sp
 	j	ret_from_irq
 	 nop
 1:
+#else
+	 addu	a0, MIPSCPU_INT_BASE
 #endif
-	/*
-	 * Here by mistake?  This is possible, what can happen is that by the
-	 * time we take the exception the IRQ pin goes low, so just leave if
-	 * this is the case.
-	 */
-	move	a1,s0
-	PRINT("Got interrupt: c0_cause = %08x\n")
-	mfc0	a1, CP0_EPC
-	PRINT("c0_epc = %08x\n")
+
+	jal	do_IRQ
+	 move	a1, sp
 
 	j	ret_from_irq
 	 nop
+
+
+spurious:
+	j	spurious_interrupt
+	 nop
 	END(mipsIRQ)
diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mips-boards/generic/pci.c
index 92c34bda02ae..1f6f9df74ab2 100644
--- a/arch/mips/mips-boards/generic/pci.c
+++ b/arch/mips/mips-boards/generic/pci.c
@@ -1,6 +1,8 @@
 /*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 1999, 2000, 2004, 2005  MIPS Technologies, Inc.
+ *	All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
  *
  * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
  *
@@ -19,65 +21,46 @@
  *
  * MIPS boards specific PCI support.
  */
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/mips-boards/generic.h>
 #include <asm/gt64120.h>
+
+#include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/bonito64.h>
 #include <asm/mips-boards/msc01_pci.h>
-#ifdef CONFIG_MIPS_MALTA
-#include <asm/mips-boards/malta.h>
-#endif
 
 static struct resource bonito64_mem_resource = {
 	.name	= "Bonito PCI MEM",
-	.start	= 0x10000000UL,
-	.end	= 0x1bffffffUL,
 	.flags	= IORESOURCE_MEM,
 };
 
 static struct resource bonito64_io_resource = {
-	.name	= "Bonito IO MEM",
-	.start	= 0x00002000UL,	/* avoid conflicts with YAMON allocated I/O addresses */
+	.name	= "Bonito PCI I/O",
+	.start	= 0x00000000UL,
 	.end	= 0x000fffffUL,
 	.flags	= IORESOURCE_IO,
 };
 
 static struct resource gt64120_mem_resource = {
-	.name	= "GT64120 PCI MEM",
-	.start	= 0x10000000UL,
-	.end	= 0x1bdfffffUL,
+	.name	= "GT-64120 PCI MEM",
 	.flags	= IORESOURCE_MEM,
 };
 
 static struct resource gt64120_io_resource = {
-	.name	= "GT64120 IO MEM",
-#ifdef CONFIG_MIPS_ATLAS
-	.start	= 0x18000000UL,
-	.end	= 0x181fffffUL,
-#endif
-#ifdef CONFIG_MIPS_MALTA
-	.start	= 0x00002000UL,
-	.end	= 0x001fffffUL,
-#endif
+	.name	= "GT-64120 PCI I/O",
 	.flags	= IORESOURCE_IO,
 };
 
 static struct resource msc_mem_resource = {
 	.name	= "MSC PCI MEM",
-	.start	= 0x10000000UL,
-	.end	= 0x1fffffffUL,
 	.flags	= IORESOURCE_MEM,
 };
 
 static struct resource msc_io_resource = {
-	.name	= "MSC IO MEM",
-	.start	= 0x00002000UL,
-	.end	= 0x007fffffUL,
+	.name	= "MSC PCI I/O",
 	.flags	= IORESOURCE_IO,
 };
 
@@ -89,7 +72,6 @@ static struct pci_controller bonito64_controller = {
 	.pci_ops	= &bonito64_pci_ops,
 	.io_resource	= &bonito64_io_resource,
 	.mem_resource	= &bonito64_mem_resource,
-	.mem_offset	= 0x10000000UL,
 	.io_offset	= 0x00000000UL,
 };
 
@@ -97,21 +79,18 @@ static struct pci_controller gt64120_controller = {
 	.pci_ops	= &gt64120_pci_ops,
 	.io_resource	= &gt64120_io_resource,
 	.mem_resource	= &gt64120_mem_resource,
-	.mem_offset	= 0x00000000UL,
-	.io_offset	= 0x00000000UL,
 };
 
-static struct pci_controller  msc_controller = {
+static struct pci_controller msc_controller = {
 	.pci_ops	= &msc_pci_ops,
 	.io_resource	= &msc_io_resource,
 	.mem_resource	= &msc_mem_resource,
-	.mem_offset	= 0x10000000UL,
-	.io_offset	= 0x00000000UL,
 };
 
-static int __init pcibios_init(void)
+void __init mips_pcibios_init(void)
 {
 	struct pci_controller *controller;
+	unsigned long start, end, map, start1, end1, map1, map2, map3, mask;
 
 	switch (mips_revision_corid) {
 	case MIPS_REVISION_CORID_QED_RM5261:
@@ -130,34 +109,140 @@ static int __init pcibios_init(void)
 			 (0 << GT_PCI0_CFGADDR_DEVNUM_SHF) | /* GT64120 dev */
 			 (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | /* Function 0*/
 			 ((0x20/4) << GT_PCI0_CFGADDR_REGNUM_SHF) | /* BAR 4*/
-			 GT_PCI0_CFGADDR_CONFIGEN_BIT );
+			 GT_PCI0_CFGADDR_CONFIGEN_BIT);
 
 		/* Perform the write */
 		GT_WRITE(GT_PCI0_CFGDATA_OFS, CPHYSADDR(MIPS_GT_BASE));
 
+		/* Set up resource ranges from the controller's registers.  */
+		start = GT_READ(GT_PCI0M0LD_OFS);
+		end = GT_READ(GT_PCI0M0HD_OFS);
+		map = GT_READ(GT_PCI0M0REMAP_OFS);
+		end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK);
+		start1 = GT_READ(GT_PCI0M1LD_OFS);
+		end1 = GT_READ(GT_PCI0M1HD_OFS);
+		map1 = GT_READ(GT_PCI0M1REMAP_OFS);
+		end1 = (end1 & GT_PCI_HD_MSK) | (start1 & ~GT_PCI_HD_MSK);
+		/* Cannot support multiple windows, use the wider.  */
+		if (end1 - start1 > end - start) {
+			start = start1;
+			end = end1;
+			map = map1;
+		}
+		mask = ~(start ^ end);
+                /* We don't support remapping with a discontiguous mask.  */
+		BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) &&
+		       mask != ~((mask & -mask) - 1));
+		gt64120_mem_resource.start = start;
+		gt64120_mem_resource.end = end;
+		gt64120_controller.mem_offset = (start & mask) - (map & mask);
+		/* Addresses are 36-bit, so do shifts in the destinations.  */
+		gt64120_mem_resource.start <<= GT_PCI_DCRM_SHF;
+		gt64120_mem_resource.end <<= GT_PCI_DCRM_SHF;
+		gt64120_mem_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1;
+		gt64120_controller.mem_offset <<= GT_PCI_DCRM_SHF;
+
+		start = GT_READ(GT_PCI0IOLD_OFS);
+		end = GT_READ(GT_PCI0IOHD_OFS);
+		map = GT_READ(GT_PCI0IOREMAP_OFS);
+		end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK);
+		mask = ~(start ^ end);
+                /* We don't support remapping with a discontiguous mask.  */
+		BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) &&
+		       mask != ~((mask & -mask) - 1));
+		gt64120_io_resource.start = map & mask;
+		gt64120_io_resource.end = (map & mask) | ~mask;
+		gt64120_controller.io_offset = 0;
+		/* Addresses are 36-bit, so do shifts in the destinations.  */
+		gt64120_io_resource.start <<= GT_PCI_DCRM_SHF;
+		gt64120_io_resource.end <<= GT_PCI_DCRM_SHF;
+		gt64120_io_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1;
+
 		controller = &gt64120_controller;
 		break;
 
 	case MIPS_REVISION_CORID_BONITO64:
 	case MIPS_REVISION_CORID_CORE_20K:
 	case MIPS_REVISION_CORID_CORE_EMUL_BON:
+		/* Set up resource ranges from the controller's registers.  */
+		map = BONITO_PCIMAP;
+		map1 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO0) >>
+		       BONITO_PCIMAP_PCIMAP_LO0_SHIFT;
+		map2 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO1) >>
+		       BONITO_PCIMAP_PCIMAP_LO1_SHIFT;
+		map3 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO2) >>
+		       BONITO_PCIMAP_PCIMAP_LO2_SHIFT;
+		/* Combine as many adjacent windows as possible.  */
+		map = map1;
+		start = BONITO_PCILO0_BASE;
+		end = 1;
+		if (map3 == map2 + 1) {
+			map = map2;
+			start = BONITO_PCILO1_BASE;
+			end++;
+		}
+		if (map2 == map1 + 1) {
+			map = map1;
+			start = BONITO_PCILO0_BASE;
+			end++;
+		}
+		bonito64_mem_resource.start = start;
+		bonito64_mem_resource.end = start +
+					    BONITO_PCIMAP_WINBASE(end) - 1;
+		bonito64_controller.mem_offset = start -
+						 BONITO_PCIMAP_WINBASE(map);
+
 		controller = &bonito64_controller;
 		break;
 
 	case MIPS_REVISION_CORID_CORE_MSC:
 	case MIPS_REVISION_CORID_CORE_FPGA2:
+	case MIPS_REVISION_CORID_CORE_FPGA3:
 	case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+		/* Set up resource ranges from the controller's registers.  */
+		MSC_READ(MSC01_PCI_SC2PMBASL, start);
+		MSC_READ(MSC01_PCI_SC2PMMSKL, mask);
+		MSC_READ(MSC01_PCI_SC2PMMAPL, map);
+		msc_mem_resource.start = start & mask;
+		msc_mem_resource.end = (start & mask) | ~mask;
+		msc_controller.mem_offset = (start & mask) - (map & mask);
+
+		MSC_READ(MSC01_PCI_SC2PIOBASL, start);
+		MSC_READ(MSC01_PCI_SC2PIOMSKL, mask);
+		MSC_READ(MSC01_PCI_SC2PIOMAPL, map);
+		msc_io_resource.start = map & mask;
+		msc_io_resource.end = (map & mask) | ~mask;
+		msc_controller.io_offset = 0;
+		ioport_resource.end = ~mask;
+
+		/* If ranges overlap I/O takes precedence.  */
+		start = start & mask;
+		end = start | ~mask;
+		if ((start >= msc_mem_resource.start &&
+		     start <= msc_mem_resource.end) ||
+		    (end >= msc_mem_resource.start &&
+		     end <= msc_mem_resource.end)) {
+			/* Use the larger space.  */
+			start = max(start, msc_mem_resource.start);
+			end = min(end, msc_mem_resource.end);
+			if (start - msc_mem_resource.start >=
+			    msc_mem_resource.end - end)
+				msc_mem_resource.end = start - 1;
+			else
+				msc_mem_resource.start = end + 1;
+		}
+
 		controller = &msc_controller;
 		break;
 	default:
-		return 1;
+		return;
 	}
 
+	if (controller->io_resource->start < 0x00001000UL)	/* FIXME */
+		controller->io_resource->start = 0x00001000UL;
+
+	iomem_resource.end &= 0xfffffffffULL;			/* 64 GB */
 	ioport_resource.end = controller->io_resource->end;
 
 	register_pci_controller (controller);
-
-	return 0;
 }
-
-early_initcall(pcibios_init);
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index 16315444dd5a..72a12d931cba 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -31,22 +31,21 @@
 
 #include <asm/mipsregs.h>
 #include <asm/ptrace.h>
+#include <asm/hardirq.h>
+#include <asm/irq.h>
 #include <asm/div64.h>
 #include <asm/cpu.h>
 #include <asm/time.h>
 #include <asm/mc146818-time.h>
+#include <asm/msc01_ic.h>
 
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/prom.h>
+#include <asm/mips-boards/maltaint.h>
+#include <asm/mc146818-time.h>
 
 unsigned long cpu_khz;
 
-#if defined(CONFIG_MIPS_SEAD)
-#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ5)
-#else
-#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
-#endif
-
 #if defined(CONFIG_MIPS_ATLAS)
 static char display_string[] = "        LINUX ON ATLAS       ";
 #endif
@@ -59,20 +58,61 @@ static char display_string[] = "        LINUX ON SEAD       ";
 static unsigned int display_count = 0;
 #define MAX_DISPLAY_COUNT (sizeof(display_string) - 8)
 
-#define MIPS_CPU_TIMER_IRQ (NR_IRQS-1)
-
 static unsigned int timer_tick_count=0;
+static int mips_cpu_timer_irq;
 
-void mips_timer_interrupt(struct pt_regs *regs)
+static inline void scroll_display_message(void)
 {
 	if ((timer_tick_count++ % HZ) == 0) {
 		mips_display_message(&display_string[display_count++]);
 		if (display_count == MAX_DISPLAY_COUNT)
-		        display_count = 0;
+			display_count = 0;
+	}
+}
+
+static void mips_timer_dispatch (struct pt_regs *regs)
+{
+	do_IRQ (mips_cpu_timer_irq, regs);
+}
 
+irqreturn_t mips_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+#ifdef CONFIG_SMP
+	int cpu = smp_processor_id();
+
+	if (cpu == 0) {
+		/*
+		 * CPU 0 handles the global timer interrupt job and process accounting
+		 * resets count/compare registers to trigger next timer int.
+		 */
+		(void) timer_interrupt(irq, dev_id, regs);
+		scroll_display_message();
+	}
+	else {
+		/* Everyone else needs to reset the timer int here as
+		   ll_local_timer_interrupt doesn't */
+		/*
+		 * FIXME: need to cope with counter underflow.
+		 * More support needs to be added to kernel/time for
+		 * counter/timer interrupts on multiple CPU's
+		 */
+		write_c0_compare (read_c0_count() + (mips_hpt_frequency/HZ));
+		/*
+		 * other CPUs should do profiling and process accounting
+		 */
+		local_timer_interrupt (irq, dev_id, regs);
 	}
 
-	ll_timer_interrupt(MIPS_CPU_TIMER_IRQ, regs);
+	return IRQ_HANDLED;
+#else
+	irqreturn_t r;
+
+	r = timer_interrupt(irq, dev_id, regs);
+
+	scroll_display_message();
+
+	return r;
+#endif
 }
 
 /*
@@ -140,10 +180,8 @@ void __init mips_time_init(void)
 
 	local_irq_save(flags);
 
-#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_MALTA)
         /* Set Data mode - binary. */
         CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
-#endif
 
 	est_freq = estimate_cpu_frequency ();
 
@@ -157,11 +195,29 @@ void __init mips_time_init(void)
 
 void __init mips_timer_setup(struct irqaction *irq)
 {
+	if (cpu_has_veic) {
+		set_vi_handler (MSC01E_INT_CPUCTR, mips_timer_dispatch);
+		mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
+	}
+	else {
+		if (cpu_has_vint)
+			set_vi_handler (MIPSCPU_INT_CPUCTR, mips_timer_dispatch);
+		mips_cpu_timer_irq = MIPSCPU_INT_BASE + MIPSCPU_INT_CPUCTR;
+	}
+
+
 	/* we are using the cpu counter for timer interrupts */
-	irq->handler = no_action;     /* we use our own handler */
-	setup_irq(MIPS_CPU_TIMER_IRQ, irq);
+	irq->handler = mips_timer_interrupt;	/* we use our own handler */
+	setup_irq(mips_cpu_timer_irq, irq);
+
+#ifdef CONFIG_SMP
+	/* irq_desc(riptor) is a global resource, when the interrupt overlaps
+	   on seperate cpu's the first one tries to handle the second interrupt.
+	   The effect is that the int remains disabled on the second cpu.
+	   Mark the interrupt with IRQ_PER_CPU to avoid any confusion */
+	irq_desc[mips_cpu_timer_irq].status |= IRQ_PER_CPU;
+#endif
 
         /* to generate the first timer interrupt */
 	write_c0_compare (read_c0_count() + mips_hpt_frequency/HZ);
-	set_c0_status(ALLINTS);
 }
diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c
index dd2db35966bc..d06dc5ad6c9e 100644
--- a/arch/mips/mips-boards/malta/malta_int.c
+++ b/arch/mips/mips-boards/malta/malta_int.c
@@ -30,6 +30,7 @@
 #include <linux/random.h>
 
 #include <asm/i8259.h>
+#include <asm/irq_cpu.h>
 #include <asm/io.h>
 #include <asm/mips-boards/malta.h>
 #include <asm/mips-boards/maltaint.h>
@@ -37,8 +38,10 @@
 #include <asm/gt64120.h>
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/msc01_pci.h>
+#include <asm/msc01_ic.h>
 
 extern asmlinkage void mipsIRQ(void);
+extern void mips_timer_interrupt(void);
 
 static DEFINE_SPINLOCK(mips_irq_lock);
 
@@ -54,6 +57,7 @@ static inline int mips_pcibios_iack(void)
 	switch(mips_revision_corid) {
 	case MIPS_REVISION_CORID_CORE_MSC:
 	case MIPS_REVISION_CORID_CORE_FPGA2:
+	case MIPS_REVISION_CORID_CORE_FPGA3:
 	case MIPS_REVISION_CORID_CORE_EMUL_MSC:
 	        MSC_READ(MSC01_PCI_IACK, irq);
 		irq &= 0xff;
@@ -91,88 +95,86 @@ static inline int mips_pcibios_iack(void)
 	return irq;
 }
 
-static inline int get_int(int *irq)
+static inline int get_int(void)
 {
 	unsigned long flags;
-
+	int irq;
 	spin_lock_irqsave(&mips_irq_lock, flags);
 
-	*irq = mips_pcibios_iack();
+	irq = mips_pcibios_iack();
 
 	/*
-	 * IRQ7 is used to detect spurious interrupts.
-	 * The interrupt acknowledge cycle returns IRQ7, if no
-	 * interrupts is requested.
-	 * We can differentiate between this situation and a
-	 * "Normal" IRQ7 by reading the ISR.
+	 * The only way we can decide if an interrupt is spurious
+	 * is by checking the 8259 registers.  This needs a spinlock
+	 * on an SMP system,  so leave it up to the generic code...
 	 */
-	if (*irq == 7)
-	{
-		outb(PIIX4_OCW3_SEL | PIIX4_OCW3_ISR,
-		     PIIX4_ICTLR1_OCW3);
-		if (!(inb(PIIX4_ICTLR1_OCW3) & (1 << 7))) {
-			spin_unlock_irqrestore(&mips_irq_lock, flags);
-			printk("We got a spurious interrupt from PIIX4.\n");
-			atomic_inc(&irq_err_count);
-			return -1;    /* Spurious interrupt. */
-		}
-	}
 
 	spin_unlock_irqrestore(&mips_irq_lock, flags);
 
-	return 0;
+	return irq;
 }
 
 void malta_hw0_irqdispatch(struct pt_regs *regs)
 {
 	int irq;
 
-	if (get_int(&irq))
-	        return;  /* interrupt has already been cleared */
+	irq = get_int();
+	if (irq < 0)
+		return;  /* interrupt has already been cleared */
 
-	do_IRQ(irq, regs);
+	do_IRQ(MALTA_INT_BASE+irq, regs);
 }
 
 void corehi_irqdispatch(struct pt_regs *regs)
 {
-        unsigned int data,datahi;
-
-	/* Mask out corehi interrupt. */
-	clear_c0_status(IE_IRQ3);
+	unsigned int intrcause,datalo,datahi;
+        unsigned int pcimstat, intisr, inten, intpol, intedge, intsteer, pcicmd, pcibadaddr;
 
         printk("CoreHI interrupt, shouldn't happen, so we die here!!!\n");
         printk("epc   : %08lx\nStatus: %08lx\nCause : %08lx\nbadVaddr : %08lx\n"
 , regs->cp0_epc, regs->cp0_status, regs->cp0_cause, regs->cp0_badvaddr);
+
+	/* Read all the registers and then print them as there is a
+	   problem with interspersed printk's upsetting the Bonito controller.
+	   Do it for the others too.
+	*/
+
         switch(mips_revision_corid) {
         case MIPS_REVISION_CORID_CORE_MSC:
         case MIPS_REVISION_CORID_CORE_FPGA2:
-	case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+        case MIPS_REVISION_CORID_CORE_FPGA3:
+        case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+                ll_msc_irq(regs);
                 break;
         case MIPS_REVISION_CORID_QED_RM5261:
         case MIPS_REVISION_CORID_CORE_LV:
         case MIPS_REVISION_CORID_CORE_FPGA:
         case MIPS_REVISION_CORID_CORE_FPGAR2:
-                data = GT_READ(GT_INTRCAUSE_OFS);
-                printk("GT_INTRCAUSE = %08x\n", data);
-                data = GT_READ(GT_CPUERR_ADDRLO_OFS);
+                intrcause = GT_READ(GT_INTRCAUSE_OFS);
+                datalo = GT_READ(GT_CPUERR_ADDRLO_OFS);
                 datahi = GT_READ(GT_CPUERR_ADDRHI_OFS);
-                printk("GT_CPUERR_ADDR = %02x%08x\n", datahi, data);
+                printk("GT_INTRCAUSE = %08x\n", intrcause);
+                printk("GT_CPUERR_ADDR = %02x%08x\n", datahi, datalo);
                 break;
         case MIPS_REVISION_CORID_BONITO64:
         case MIPS_REVISION_CORID_CORE_20K:
         case MIPS_REVISION_CORID_CORE_EMUL_BON:
-                data = BONITO_INTISR;
-                printk("BONITO_INTISR = %08x\n", data);
-                data = BONITO_INTEN;
-                printk("BONITO_INTEN = %08x\n", data);
-                data = BONITO_INTPOL;
-                printk("BONITO_INTPOL = %08x\n", data);
-                data = BONITO_INTEDGE;
-                printk("BONITO_INTEDGE = %08x\n", data);
-                data = BONITO_INTSTEER;
-                printk("BONITO_INTSTEER = %08x\n", data);
-                data = BONITO_PCICMD;
-                printk("BONITO_PCICMD = %08x\n", data);
+                pcibadaddr = BONITO_PCIBADADDR;
+                pcimstat = BONITO_PCIMSTAT;
+                intisr = BONITO_INTISR;
+                inten = BONITO_INTEN;
+                intpol = BONITO_INTPOL;
+                intedge = BONITO_INTEDGE;
+                intsteer = BONITO_INTSTEER;
+                pcicmd = BONITO_PCICMD;
+                printk("BONITO_INTISR = %08x\n", intisr);
+                printk("BONITO_INTEN = %08x\n", inten);
+                printk("BONITO_INTPOL = %08x\n", intpol);
+                printk("BONITO_INTEDGE = %08x\n", intedge);
+                printk("BONITO_INTSTEER = %08x\n", intsteer);
+                printk("BONITO_PCICMD = %08x\n", pcicmd);
+                printk("BONITO_PCIBADADDR = %08x\n", pcibadaddr);
+                printk("BONITO_PCIMSTAT = %08x\n", pcimstat);
                 break;
         }
 
@@ -180,8 +182,71 @@ void corehi_irqdispatch(struct pt_regs *regs)
         die("CoreHi interrupt", regs);
 }
 
+static struct irqaction i8259irq = {
+	.handler = no_action,
+	.name = "XT-PIC cascade"
+};
+
+static struct irqaction corehi_irqaction = {
+	.handler = no_action,
+	.name = "CoreHi"
+};
+
+msc_irqmap_t __initdata msc_irqmap[] = {
+	{MSC01C_INT_TMR,		MSC01_IRQ_EDGE, 0},
+	{MSC01C_INT_PCI,		MSC01_IRQ_LEVEL, 0},
+};
+int __initdata msc_nr_irqs = sizeof(msc_irqmap)/sizeof(msc_irqmap_t);
+
+msc_irqmap_t __initdata msc_eicirqmap[] = {
+	{MSC01E_INT_SW0,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_SW1,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_I8259A,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_SMI,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_COREHI,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_CORELO,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_TMR,		MSC01_IRQ_EDGE, 0},
+	{MSC01E_INT_PCI,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_PERFCTR,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_CPUCTR,		MSC01_IRQ_LEVEL, 0}
+};
+int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap)/sizeof(msc_irqmap_t);
+
 void __init arch_init_irq(void)
 {
 	set_except_vector(0, mipsIRQ);
 	init_i8259_irqs();
+
+	if (!cpu_has_veic)
+		mips_cpu_irq_init (MIPSCPU_INT_BASE);
+
+        switch(mips_revision_corid) {
+        case MIPS_REVISION_CORID_CORE_MSC:
+        case MIPS_REVISION_CORID_CORE_FPGA2:
+        case MIPS_REVISION_CORID_CORE_FPGA3:
+        case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+		if (cpu_has_veic)
+			init_msc_irqs (MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs);
+		else
+			init_msc_irqs (MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs);
+	}
+
+	if (cpu_has_veic) {
+		set_vi_handler (MSC01E_INT_I8259A, malta_hw0_irqdispatch);
+		set_vi_handler (MSC01E_INT_COREHI, corehi_irqdispatch);
+		setup_irq (MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq);
+		setup_irq (MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction);
+	}
+	else if (cpu_has_vint) {
+		set_vi_handler (MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
+		set_vi_handler (MIPSCPU_INT_COREHI, corehi_irqdispatch);
+
+		setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
+		setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
+	}
+	else {
+		set_except_vector(0, mipsIRQ);
+		setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
+		setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
+	}
 }
diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c
index df6db6419ae9..2209e8a9de34 100644
--- a/arch/mips/mips-boards/malta/malta_setup.c
+++ b/arch/mips/mips-boards/malta/malta_setup.c
@@ -111,10 +111,12 @@ void __init fd_activate(void)
 }
 #endif
 
-static int __init malta_setup(void)
+void __init plat_setup(void)
 {
 	unsigned int i;
 
+	mips_pcibios_init();
+
 	/* Request I/O space for devices used on the Malta board. */
 	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
 		request_resource(&ioport_resource, standard_io_resources+i);
@@ -224,8 +226,4 @@ static int __init malta_setup(void)
 	board_time_init = mips_time_init;
 	board_timer_setup = mips_timer_setup;
 	rtc_get_time = mips_rtc_get_time;
-
-	return 0;
 }
-
-early_initcall(malta_setup);
diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c
index e5109657ed5a..e1dd7e009750 100644
--- a/arch/mips/mips-boards/sead/sead_int.c
+++ b/arch/mips/mips-boards/sead/sead_int.c
@@ -2,6 +2,7 @@
  * Carsten Langgaard, carstenl@mips.com
  * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
  * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2004  Maciej W. Rozycki
  *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
@@ -21,7 +22,9 @@
  */
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <linux/interrupt.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/system.h>
 
 #include <asm/mips-boards/seadint.h>
 
@@ -39,13 +42,8 @@ asmlinkage void sead_hw1_irqdispatch(struct pt_regs *regs)
 
 void __init arch_init_irq(void)
 {
-        /*
-         * Mask out all interrupt
-	 */
-	clear_c0_status(0x0000ff00);
+	mips_cpu_irq_init(0);
 
 	/* Now safe to set the exception vector. */
 	set_except_vector(0, mipsIRQ);
-
-	mips_cpu_irq_init(0);
 }
diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c
index 29892b88a4fc..de90bec5505e 100644
--- a/arch/mips/mips-boards/sead/sead_setup.c
+++ b/arch/mips/mips-boards/sead/sead_setup.c
@@ -57,8 +57,6 @@ static void __init sead_setup(void)
 	mips_reboot_setup();
 }
 
-early_initcall(sead_setup);
-
 static void __init serial_init(void)
 {
 #ifdef CONFIG_SERIAL_8250
diff --git a/arch/mips/mips-boards/sim/Makefile b/arch/mips/mips-boards/sim/Makefile
new file mode 100644
index 000000000000..5b977de4ecff
--- /dev/null
+++ b/arch/mips/mips-boards/sim/Makefile
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+#
+# This program is free software; you can distribute it and/or modify it
+# under the terms of the GNU General Public License (Version 2) as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+
+obj-y := sim_setup.o sim_mem.o sim_time.o sim_printf.o sim_int.o sim_irq.o \
+	sim_cmdline.o
+obj-$(CONFIG_SMP) += sim_smp.o
diff --git a/arch/mips/mips-boards/sim/cmdline.c b/arch/mips/mips-boards/sim/cmdline.c
new file mode 100644
index 000000000000..fef9fbd8e710
--- /dev/null
+++ b/arch/mips/mips-boards/sim/cmdline.c
@@ -0,0 +1,59 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Kernel command line creation using the prom monitor (YAMON) argc/argv.
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+
+extern int prom_argc;
+extern int *_prom_argv;
+
+/*
+ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
+ * This macro take care of sign extension.
+ */
+#define prom_argv(index) ((char *)(((int *)(int)_prom_argv)[(index)]))
+
+char arcs_cmdline[CL_SIZE];
+
+char * __init prom_getcmdline(void)
+{
+	return &(arcs_cmdline[0]);
+}
+
+
+void  __init prom_init_cmdline(void)
+{
+	char *cp;
+	int actr;
+
+	actr = 1; /* Always ignore argv[0] */
+
+	cp = &(arcs_cmdline[0]);
+	while(actr < prom_argc) {
+	        strcpy(cp, prom_argv(actr));
+		cp += strlen(prom_argv(actr));
+		*cp++ = ' ';
+		actr++;
+	}
+	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
+		--cp;
+	*cp = '\0';
+}
diff --git a/arch/mips/mips-boards/sim/sim_IRQ.c b/arch/mips/mips-boards/sim/sim_IRQ.c
new file mode 100644
index 000000000000..9987a85aabeb
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_IRQ.c
@@ -0,0 +1,148 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999, 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Interrupt exception dispatch code.
+ */
+#include <linux/config.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/* A lot of complication here is taken away because:
+ *
+ * 1) We handle one interrupt and return, sitting in a loop and moving across
+ *    all the pending IRQ bits in the cause register is _NOT_ the answer, the
+ *    common case is one pending IRQ so optimize in that direction.
+ *
+ * 2) We need not check against bits in the status register IRQ mask, that
+ *    would make this routine slow as hell.
+ *
+ * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
+ *    between like BSD spl() brain-damage.
+ *
+ * Furthermore, the IRQs on the MIPS board look basically (barring software
+ * IRQs which we don't use at all and all external interrupt sources are
+ * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
+ *
+ *	MIPS IRQ	Source
+ *      --------        ------
+ *             0	Software (ignored)
+ *             1        Software (ignored)
+ *             2        Combined hardware interrupt (hw0)
+ *             3        Hardware (ignored)
+ *             4        Hardware (ignored)
+ *             5        Hardware (ignored)
+ *             6        Hardware (ignored)
+ *             7        R4k timer (what we use)
+ *
+ * Note: On the SEAD board thing are a little bit different.
+ *       Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
+ *       wired to UART1.
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ----     R4k Timer
+ * Lowest  ----     Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+
+	.text
+	.set	noreorder
+	.set	noat
+	.align	5
+	NESTED(mipsIRQ, PT_SIZE, sp)
+	SAVE_ALL
+	CLI
+	.set	at
+
+	mfc0	s0, CP0_CAUSE		# get irq bits
+	mfc0	s1, CP0_STATUS		# get irq mask
+	and	s0, s1
+
+	/* First we check for r4k counter/timer IRQ. */
+	andi	a0, s0, CAUSEF_IP7
+	beq	a0, zero, 1f
+	 andi	a0, s0, CAUSEF_IP2	# delay slot, check hw0 interrupt
+
+	/* Wheee, a timer interrupt. */
+	move	a0, sp
+	jal	mips_timer_interrupt
+	 nop
+
+	j	ret_from_irq
+	 nop
+
+1:
+#if defined(CONFIG_MIPS_SEAD)
+	beq	a0, zero, 1f
+	 andi	a0, s0, CAUSEF_IP3	# delay slot, check hw1 interrupt
+#else
+	beq	a0, zero, 1f		# delay slot, check hw3 interrupt
+ 	 andi	a0, s0, CAUSEF_IP5
+#endif
+
+	/* Wheee, combined hardware level zero interrupt. */
+#if defined(CONFIG_MIPS_ATLAS)
+	jal	atlas_hw0_irqdispatch
+#elif defined(CONFIG_MIPS_MALTA)
+	jal	malta_hw0_irqdispatch
+#elif defined(CONFIG_MIPS_SEAD)
+	jal	sead_hw0_irqdispatch
+#else
+#error "MIPS board not supported\n"
+#endif
+	 move	a0, sp			# delay slot
+
+	j	ret_from_irq
+	 nop				# delay slot
+
+1:
+#if defined(CONFIG_MIPS_SEAD)
+	beq	a0, zero, 1f
+	 andi	a0, s0, CAUSEF_IP5	# delay slot, check hw3 interrupt
+	jal	sead_hw1_irqdispatch
+	 move	a0, sp			# delay slot
+	j	ret_from_irq
+	 nop				# delay slot
+1:
+#endif
+#if defined(CONFIG_MIPS_MALTA)
+	beq	a0, zero, 1f            # check hw3 (coreHI) interrupt
+	 nop
+	jal	corehi_irqdispatch
+	 move	a0, sp
+	j	ret_from_irq
+	 nop
+1:
+#endif
+	/*
+	 * Here by mistake?  This is possible, what can happen is that by the
+	 * time we take the exception the IRQ pin goes low, so just leave if
+	 * this is the case.
+	 */
+	move	a1,s0
+	PRINT("Got interrupt: c0_cause = %08x\n")
+	mfc0	a1, CP0_EPC
+	PRINT("c0_epc = %08x\n")
+
+	j	ret_from_irq
+	 nop
+	END(mipsIRQ)
diff --git a/arch/mips/mips-boards/sim/sim_cmdline.c b/arch/mips/mips-boards/sim/sim_cmdline.c
new file mode 100644
index 000000000000..9df37c6fca36
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_cmdline.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/bootinfo.h>
+
+extern char arcs_cmdline[];
+
+char * __init prom_getcmdline(void)
+{
+	return arcs_cmdline;
+}
+
+
+void  __init prom_init_cmdline(void)
+{
+    /* nothing to do */
+}
diff --git a/arch/mips/mips-boards/sim/sim_int.c b/arch/mips/mips-boards/sim/sim_int.c
new file mode 100644
index 000000000000..a4d0a2c05031
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_int.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 1999, 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <asm/mips-boards/simint.h>
+
+
+extern void mips_cpu_irq_init(int);
+
+extern asmlinkage void simIRQ(void);
+
+asmlinkage void sim_hw0_irqdispatch(struct pt_regs *regs)
+{
+	do_IRQ(2, regs);
+}
+
+void __init arch_init_irq(void)
+{
+	/* Now safe to set the exception vector. */
+	set_except_vector(0, simIRQ);
+
+	mips_cpu_irq_init(MIPSCPU_INT_BASE);
+}
diff --git a/arch/mips/mips-boards/sim/sim_irq.S b/arch/mips/mips-boards/sim/sim_irq.S
new file mode 100644
index 000000000000..835f0387fcd4
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_irq.S
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 1999, 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Interrupt exception dispatch code.
+ *
+ */
+#include <linux/config.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+#include <asm/mips-boards/simint.h>
+
+
+	.text
+	.set	noreorder
+	.set	noat
+	.align	5
+	NESTED(simIRQ, PT_SIZE, sp)
+	SAVE_ALL
+	CLI
+	.set	at
+
+	mfc0	s0, CP0_CAUSE		# get irq bits
+	mfc0	s1, CP0_STATUS		# get irq mask
+	andi	s0, ST0_IM		# CAUSE.CE may be non-zero!
+	and	s0, s1
+
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+ 	.set	mips32
+	clz	a0, s0
+	.set	mips0
+	negu	a0
+	addu	a0, 31-CAUSEB_IP
+	bltz	a0, spurious
+#else
+	beqz	s0, spurious
+	 li	a0, 7
+
+	and	t0, s0, 0xf000
+	sltiu	t0, t0, 1
+	sll	t0, 2
+	subu	a0, t0
+	sll	s0, t0
+
+	and	t0, s0, 0xc000
+	sltiu	t0, t0, 1
+	sll	t0, 1
+	subu	a0, t0
+	sll	s0, t0
+
+	and	t0, s0, 0x8000
+	sltiu	t0, t0, 1
+	# sll	t0, 0
+	subu	a0, t0
+	# sll	s0, t0
+#endif
+
+#ifdef CASCADE_IRQ
+	 li	a1, CASCADE_IRQ
+	bne	a0, a1, 1f
+	 addu	a0, MIPSCPU_INT_BASE
+
+	jal	CASCADE_DISPATCH
+	 move	 a0, sp
+
+	j	ret_from_irq
+	 nop
+1:
+#else
+	 addu	a0, MIPSCPU_INT_BASE
+#endif
+
+	jal	do_IRQ
+	 move	a1, sp
+
+	j	ret_from_irq
+	 nop
+
+
+spurious:
+	j	spurious_interrupt
+	 nop
+	END(simIRQ)
diff --git a/arch/mips/mips-boards/sim/sim_mem.c b/arch/mips/mips-boards/sim/sim_mem.c
new file mode 100644
index 000000000000..0dbd7435bb2a
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_mem.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+
+#include <asm/mips-boards/prom.h>
+
+/*#define DEBUG*/
+
+enum simmem_memtypes {
+	simmem_reserved = 0,
+	simmem_free,
+};
+struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
+
+#ifdef DEBUG
+static char *mtypes[3] = {
+	"SIM reserved memory",
+	"SIM free memory",
+};
+#endif
+
+/* References to section boundaries */
+extern char _end;
+
+#define PFN_ALIGN(x)    (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
+
+
+struct prom_pmemblock * __init prom_getmdesc(void)
+{
+	unsigned int memsize;
+
+	memsize = 0x02000000;
+	prom_printf("Setting default memory size 0x%08x\n", memsize);
+
+	memset(mdesc, 0, sizeof(mdesc));
+
+	mdesc[0].type = simmem_reserved;
+	mdesc[0].base = 0x00000000;
+	mdesc[0].size = 0x00001000;
+
+	mdesc[1].type = simmem_free;
+	mdesc[1].base = 0x00001000;
+	mdesc[1].size = 0x000ff000;
+
+	mdesc[2].type = simmem_reserved;
+	mdesc[2].base = 0x00100000;
+	mdesc[2].size = CPHYSADDR(PFN_ALIGN(&_end)) - mdesc[2].base;
+
+	mdesc[3].type = simmem_free;
+	mdesc[3].base = CPHYSADDR(PFN_ALIGN(&_end));
+	mdesc[3].size = memsize - mdesc[3].base;
+
+	return &mdesc[0];
+}
+
+static int __init prom_memtype_classify (unsigned int type)
+{
+	switch (type) {
+	case simmem_free:
+		return BOOT_MEM_RAM;
+	case simmem_reserved:
+	default:
+		return BOOT_MEM_RESERVED;
+	}
+}
+
+void __init prom_meminit(void)
+{
+	struct prom_pmemblock *p;
+
+	p = prom_getmdesc();
+
+	while (p->size) {
+		long type;
+		unsigned long base, size;
+
+		type = prom_memtype_classify (p->type);
+		base = p->base;
+		size = p->size;
+
+		add_memory_region(base, size, type);
+                p++;
+	}
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+	int i;
+	unsigned long freed = 0;
+	unsigned long addr;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
+			continue;
+
+		addr = boot_mem_map.map[i].addr;
+		while (addr < boot_mem_map.map[i].addr
+			      + boot_mem_map.map[i].size) {
+			ClearPageReserved(virt_to_page(__va(addr)));
+			set_page_count(virt_to_page(__va(addr)), 1);
+			free_page((unsigned long)__va(addr));
+			addr += PAGE_SIZE;
+			freed += PAGE_SIZE;
+		}
+	}
+	printk("Freeing prom memory: %ldkb freed\n", freed >> 10);
+
+	return freed;
+}
diff --git a/arch/mips/mips-boards/sim/sim_printf.c b/arch/mips/mips-boards/sim/sim_printf.c
new file mode 100644
index 000000000000..3ee5a0b501a6
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_printf.c
@@ -0,0 +1,74 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Putting things on the screen/serial line using YAMONs facilities.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/serial_reg.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+static inline unsigned int serial_in(int offset)
+{
+	return inb(0x3f8 + offset);
+}
+
+static inline void serial_out(int offset, int value)
+{
+	outb(value, 0x3f8 + offset);
+}
+
+int putPromChar(char c)
+{
+	while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0)
+		;
+
+	serial_out(UART_TX, c);
+
+	return 1;
+}
+
+char getPromChar(void)
+{
+	while (!(serial_in(UART_LSR) & 1))
+		;
+
+	return serial_in(UART_RX);
+}
+
+void prom_printf(char *fmt, ...)
+{
+	va_list args;
+	int l;
+	char *p, *buf_end;
+	char buf[1024];
+
+	va_start(args, fmt);
+	l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */
+	va_end(args);
+
+	buf_end = buf + l;
+
+	for (p = buf; p < buf_end; p++) {
+		/* Crude cr/nl handling is better than none */
+		if (*p == '\n')
+			putPromChar('\r');
+		putPromChar(*p);
+	}
+}
diff --git a/arch/mips/mips-boards/sim/sim_setup.c b/arch/mips/mips-boards/sim/sim_setup.c
new file mode 100644
index 000000000000..485d5a58d9cf
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_setup.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
+#include <asm/serial.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/mips-boards/sim.h>
+#include <asm/mips-boards/simint.h>
+
+
+extern void sim_time_init(void);
+extern void sim_timer_setup(struct irqaction *irq);
+static void __init serial_init(void);
+unsigned int _isbonito = 0;
+
+extern void __init sanitize_tlb_entries(void);
+
+
+const char *get_system_type(void)
+{
+	return "MIPSsim";
+}
+
+void __init plat_setup(void)
+{
+	set_io_port_base(0xbfd00000);
+
+	serial_init();
+
+	board_time_init = sim_time_init;
+	board_timer_setup = sim_timer_setup;
+	prom_printf("Linux started...\n");
+
+#ifdef CONFIG_MT_SMP
+	sanitize_tlb_entries();
+#endif
+}
+
+void prom_init(void)
+{
+	set_io_port_base(0xbfd00000);
+
+	prom_printf("\nLINUX started...\n");
+	prom_init_cmdline();
+	prom_meminit();
+}
+
+
+static void __init serial_init(void)
+{
+#ifdef CONFIG_SERIAL_8250
+	struct uart_port s;
+
+	memset(&s, 0, sizeof(s));
+
+	s.iobase = 0x3f8;
+
+	/* hardware int 4 - the serial int, is CPU int 6
+	 but poll for now */
+	s.irq =  0;
+	s.uartclk = BASE_BAUD * 16;
+	s.flags = ASYNC_BOOT_AUTOCONF | UPF_SKIP_TEST;
+	s.iotype = SERIAL_IO_PORT | ASYNC_SKIP_TEST;
+	s.regshift = 0;
+	s.timeout = 4;
+
+	if (early_serial_setup(&s) != 0) {
+		prom_printf(KERN_ERR "Serial setup failed!\n");
+	}
+
+#endif
+}
diff --git a/arch/mips/mips-boards/sim/sim_smp.c b/arch/mips/mips-boards/sim/sim_smp.c
new file mode 100644
index 000000000000..19824359f5de
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_smp.c
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+/*
+ * Simulator Platform-specific hooks for SMP operation
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/smtc_ipi.h>
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+/* VPE/SMP Prototype implements platform interfaces directly */
+#if !defined(CONFIG_MIPS_MT_SMP)
+
+/*
+ * Cause the specified action to be performed on a targeted "CPU"
+ */
+
+void core_send_ipi(int cpu, unsigned int action)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	void smtc_send_ipi(int, int, unsigned int);
+
+	smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
+#endif /* CONFIG_MIPS_MT_SMTC */
+/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
+
+}
+
+/*
+ * Detect available CPUs/VPEs/TCs and populate phys_cpu_present_map
+ */
+
+void __init prom_build_cpu_map(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	extern int mipsmt_build_cpu_map(int startslot);
+	int nextslot;
+
+	cpus_clear(phys_cpu_present_map);
+
+	/* Register the boot CPU */
+
+	smp_prepare_boot_cpu();
+
+	/*
+	 * As of November, 2004, MIPSsim only simulates one core
+	 * at a time.  However, that core may be a MIPS MT core
+	 * with multiple virtual processors and thread contexts.
+	 */
+
+	if (read_c0_config3() & (1<<2)) {
+		nextslot = mipsmt_build_cpu_map(1);
+	}
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Platform "CPU" startup hook
+ */
+
+void prom_boot_secondary(int cpu, struct task_struct *idle)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	extern void smtc_boot_secondary(int cpu, struct task_struct *t);
+
+	smtc_boot_secondary(cpu, idle);
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Post-config but pre-boot cleanup entry point
+ */
+
+void prom_init_secondary(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	void smtc_init_secondary(void);
+
+	smtc_init_secondary();
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Platform SMP pre-initialization
+ */
+
+void prom_prepare_cpus(unsigned int max_cpus)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	void mipsmt_prepare_cpus(int c);
+	/*
+ 	 * As noted above, we can assume a single CPU for now
+	 * but it may be multithreaded.
+	 */
+
+	if (read_c0_config3() & (1<<2)) {
+		mipsmt_prepare_cpus(max_cpus);
+	}
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * SMP initialization finalization entry point
+ */
+
+void prom_smp_finish(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	void smtc_smp_finish(void);
+
+	smtc_smp_finish();
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Hook for after all CPUs are online
+ */
+
+void prom_cpus_done(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+#endif /* CONFIG_MIPS32R2_MT_SMP */
diff --git a/arch/mips/mips-boards/sim/sim_time.c b/arch/mips/mips-boards/sim/sim_time.c
new file mode 100644
index 000000000000..18b968c696d1
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_time.c
@@ -0,0 +1,215 @@
+#include <linux/types.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+
+#include <asm/mipsregs.h>
+#include <asm/ptrace.h>
+#include <asm/hardirq.h>
+#include <asm/div64.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/timex.h>
+#include <asm/mipsregs.h>
+#include <asm/ptrace.h>
+#include <asm/hardirq.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+#include <asm/mc146818-time.h>
+#include <asm/msc01_ic.h>
+
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
+#include <asm/mips-boards/simint.h>
+#include <asm/mc146818-time.h>
+#include <asm/smp.h>
+
+
+unsigned long cpu_khz;
+
+extern asmlinkage void ll_local_timer_interrupt(int irq, struct pt_regs *regs);
+
+irqreturn_t sim_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+#ifdef CONFIG_SMP
+	int cpu = smp_processor_id();
+
+	/*
+	 * CPU 0 handles the global timer interrupt job
+	 * resets count/compare registers to trigger next timer int.
+	 */
+#ifndef CONFIG_MIPS_MT_SMTC
+	if (cpu == 0) {
+		timer_interrupt(irq, dev_id, regs);
+	}
+	else {
+		/* Everyone else needs to reset the timer int here as
+		   ll_local_timer_interrupt doesn't */
+		/*
+		 * FIXME: need to cope with counter underflow.
+		 * More support needs to be added to kernel/time for
+		 * counter/timer interrupts on multiple CPU's
+		 */
+		write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
+	}
+#else /* SMTC */
+	/*
+	 *  In SMTC system, one Count/Compare set exists per VPE.
+	 *  Which TC within a VPE gets the interrupt is essentially
+	 *  random - we only know that it shouldn't be one with
+	 *  IXMT set. Whichever TC gets the interrupt needs to
+	 *  send special interprocessor interrupts to the other
+	 *  TCs to make sure that they schedule, etc.
+	 *
+	 *  That code is specific to the SMTC kernel, not to
+	 *  the simulation platform, so it's invoked from
+	 *  the general MIPS timer_interrupt routine.
+	 *
+	 * We have a problem in that the interrupt vector code
+	 * had to turn off the timer IM bit to avoid redundant
+	 * entries, but we may never get to mips_cpu_irq_end
+	 * to turn it back on again if the scheduler gets
+	 * involved.  So we clear the pending timer here,
+	 * and re-enable the mask...
+	 */
+
+	int vpflags = dvpe();
+	write_c0_compare (read_c0_count() - 1);
+	clear_c0_cause(0x100 << MIPSCPU_INT_CPUCTR);
+	set_c0_status(0x100 << MIPSCPU_INT_CPUCTR);
+	irq_enable_hazard();
+	evpe(vpflags);
+
+	if(cpu_data[cpu].vpe_id == 0) timer_interrupt(irq, dev_id, regs);
+	else write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
+	smtc_timer_broadcast(cpu_data[cpu].vpe_id);
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+	/*
+	 * every CPU should do profiling and process accounting
+	 */
+ 	local_timer_interrupt (irq, dev_id, regs);
+	return IRQ_HANDLED;
+#else
+	return timer_interrupt (irq, dev_id, regs);
+#endif
+}
+
+
+
+/*
+ * Estimate CPU frequency.  Sets mips_counter_frequency as a side-effect
+ */
+static unsigned int __init estimate_cpu_frequency(void)
+{
+	unsigned int prid = read_c0_prid() & 0xffff00;
+	unsigned int count;
+
+#if 1
+	/*
+	 * hardwire the board frequency to 12MHz.
+	 */
+
+	if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) ||
+	    (prid == (PRID_COMP_MIPS | PRID_IMP_25KF)))
+		count = 12000000;
+	else
+		count =  6000000;
+#else
+	unsigned int flags;
+
+	local_irq_save(flags);
+
+	/* Start counter exactly on falling edge of update flag */
+	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
+	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
+
+	/* Start r4k counter. */
+	write_c0_count(0);
+
+	/* Read counter exactly on falling edge of update flag */
+	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
+	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
+
+	count = read_c0_count();
+
+	/* restore interrupts */
+	local_irq_restore(flags);
+#endif
+
+	mips_hpt_frequency = count;
+
+	if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
+	    (prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
+		count *= 2;
+
+	count += 5000;    /* round */
+	count -= count%10000;
+
+	return count;
+}
+
+void __init sim_time_init(void)
+{
+	unsigned int est_freq, flags;
+
+	local_irq_save(flags);
+
+
+        /* Set Data mode - binary. */
+	CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
+
+
+	est_freq = estimate_cpu_frequency ();
+
+	printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
+	       (est_freq%1000000)*100/1000000);
+
+        cpu_khz = est_freq / 1000;
+
+	local_irq_restore(flags);
+}
+
+static int mips_cpu_timer_irq;
+
+static void mips_timer_dispatch (struct pt_regs *regs)
+{
+	do_IRQ (mips_cpu_timer_irq, regs);
+}
+
+
+void __init sim_timer_setup(struct irqaction *irq)
+{
+	if (cpu_has_veic) {
+		set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
+		mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
+	}
+	else {
+		if (cpu_has_vint)
+			set_vi_handler(MIPSCPU_INT_CPUCTR, mips_timer_dispatch);
+		mips_cpu_timer_irq = MIPSCPU_INT_BASE + MIPSCPU_INT_CPUCTR;
+	}
+
+	/* we are using the cpu counter for timer interrupts */
+	irq->handler = sim_timer_interrupt;
+	setup_irq(mips_cpu_timer_irq, irq);
+
+#ifdef CONFIG_SMP
+	/* irq_desc(riptor) is a global resource, when the interrupt overlaps
+	   on seperate cpu's the first one tries to handle the second interrupt.
+	   The effect is that the int remains disabled on the second cpu.
+	   Mark the interrupt with IRQ_PER_CPU to avoid any confusion */
+	irq_desc[mips_cpu_timer_irq].status |= IRQ_PER_CPU;
+#endif
+
+	/* to generate the first timer interrupt */
+	write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ));
+}
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index b56a0abdc3d4..b0178da019f0 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_CPU_R8000)		+= c-r4k.o cex-gen.o pg-r4k.o tlb-r8k.o
 obj-$(CONFIG_CPU_RM7000)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
 obj-$(CONFIG_CPU_RM9000)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
 obj-$(CONFIG_CPU_SB1)		+= c-sb1.o cerr-sb1.o cex-sb1.o pg-sb1.o \
-				   tlb-sb1.o
+				   tlb-r4k.o
 obj-$(CONFIG_CPU_TX39XX)	+= c-tx39.o pg-r4k.o tlb-r3k.o
 obj-$(CONFIG_CPU_TX49XX)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
 obj-$(CONFIG_CPU_VR41XX)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index c659f99eb39a..27f4fa25e8c9 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -221,12 +221,14 @@ static inline unsigned long get_phys_page (unsigned long addr,
 					   struct mm_struct *mm)
 {
 	pgd_t *pgd;
+	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
 	unsigned long physpage;
 
 	pgd = pgd_offset(mm, addr);
-	pmd = pmd_offset(pgd, addr);
+	pud = pud_offset(pgd, addr);
+	pmd = pmd_offset(pud, addr);
 	pte = pte_offset(pmd, addr);
 
 	if ((physpage = pte_val(*pte)) & _PAGE_VALID)
@@ -317,7 +319,7 @@ static void r3k_dma_cache_wback_inv(unsigned long start, unsigned long size)
 	r3k_flush_dcache_range(start, start + size);
 }
 
-void __init ld_mmu_r23000(void)
+void __init r3k_cache_init(void)
 {
 	extern void build_clear_page(void);
 	extern void build_copy_page(void);
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 5ea84bc98c6a..38223b44d962 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -16,6 +16,7 @@
 
 #include <asm/bcache.h>
 #include <asm/bootinfo.h>
+#include <asm/cache.h>
 #include <asm/cacheops.h>
 #include <asm/cpu.h>
 #include <asm/cpu-features.h>
@@ -26,8 +27,14 @@
 #include <asm/system.h>
 #include <asm/mmu_context.h>
 #include <asm/war.h>
+#include <asm/cacheflush.h> /* for run_uncached() */
 
-static unsigned long icache_size, dcache_size, scache_size;
+/*
+ * Must die.
+ */
+static unsigned long icache_size __read_mostly;
+static unsigned long dcache_size __read_mostly;
+static unsigned long scache_size __read_mostly;
 
 /*
  * Dummy cache handling routines for machines without boardcaches
@@ -43,8 +50,8 @@ static struct bcache_ops no_sc_ops = {
 
 struct bcache_ops *bcops = &no_sc_ops;
 
-#define cpu_is_r4600_v1_x()	((read_c0_prid() & 0xfffffff0) == 0x2010)
-#define cpu_is_r4600_v2_x()	((read_c0_prid() & 0xfffffff0) == 0x2020)
+#define cpu_is_r4600_v1_x()	((read_c0_prid() & 0xfffffff0) == 0x00002010)
+#define cpu_is_r4600_v2_x()	((read_c0_prid() & 0xfffffff0) == 0x00002020)
 
 #define R4600_HIT_CACHEOP_WAR_IMPL					\
 do {									\
@@ -190,12 +197,12 @@ static inline void r4k_blast_icache_page_indexed_setup(void)
 	if (ic_lsize == 16)
 		r4k_blast_icache_page_indexed = blast_icache16_page_indexed;
 	else if (ic_lsize == 32) {
-		if (TX49XX_ICACHE_INDEX_INV_WAR)
-			r4k_blast_icache_page_indexed =
-				tx49_blast_icache32_page_indexed;
-		else if (R4600_V1_INDEX_ICACHEOP_WAR && cpu_is_r4600_v1_x())
+		if (R4600_V1_INDEX_ICACHEOP_WAR && cpu_is_r4600_v1_x())
 			r4k_blast_icache_page_indexed =
 				blast_icache32_r4600_v1_page_indexed;
+		else if (TX49XX_ICACHE_INDEX_INV_WAR)
+			r4k_blast_icache_page_indexed =
+				tx49_blast_icache32_page_indexed;
 		else
 			r4k_blast_icache_page_indexed =
 				blast_icache32_page_indexed;
@@ -361,24 +368,33 @@ static void r4k_flush_cache_mm(struct mm_struct *mm)
 
 struct flush_cache_page_args {
 	struct vm_area_struct *vma;
-	unsigned long page;
+	unsigned long addr;
 };
 
 static inline void local_r4k_flush_cache_page(void *args)
 {
 	struct flush_cache_page_args *fcp_args = args;
 	struct vm_area_struct *vma = fcp_args->vma;
-	unsigned long page = fcp_args->page;
+	unsigned long addr = fcp_args->addr;
 	int exec = vma->vm_flags & VM_EXEC;
 	struct mm_struct *mm = vma->vm_mm;
 	pgd_t *pgdp;
+	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep;
 
-	page &= PAGE_MASK;
-	pgdp = pgd_offset(mm, page);
-	pmdp = pmd_offset(pgdp, page);
-	ptep = pte_offset(pmdp, page);
+	/*
+	 * If ownes no valid ASID yet, cannot possibly have gotten
+	 * this page into the cache.
+	 */
+	if (cpu_context(smp_processor_id(), mm) == 0)
+		return;
+
+	addr &= PAGE_MASK;
+	pgdp = pgd_offset(mm, addr);
+	pudp = pud_offset(pgdp, addr);
+	pmdp = pmd_offset(pudp, addr);
+	ptep = pte_offset(pmdp, addr);
 
 	/*
 	 * If the page isn't marked valid, the page cannot possibly be
@@ -395,12 +411,12 @@ static inline void local_r4k_flush_cache_page(void *args)
 	 */
 	if ((mm == current->active_mm) && (pte_val(*ptep) & _PAGE_VALID)) {
 		if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) {
-			r4k_blast_dcache_page(page);
+			r4k_blast_dcache_page(addr);
 			if (exec && !cpu_icache_snoops_remote_store)
-				r4k_blast_scache_page(page);
+				r4k_blast_scache_page(addr);
 		}
 		if (exec)
-			r4k_blast_icache_page(page);
+			r4k_blast_icache_page(addr);
 
 		return;
 	}
@@ -409,36 +425,30 @@ static inline void local_r4k_flush_cache_page(void *args)
 	 * Do indexed flush, too much work to get the (possible) TLB refills
 	 * to work correctly.
 	 */
-	page = INDEX_BASE + (page & (dcache_size - 1));
+	addr = INDEX_BASE + (addr & (dcache_size - 1));
 	if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) {
-		r4k_blast_dcache_page_indexed(page);
+		r4k_blast_dcache_page_indexed(addr);
 		if (exec && !cpu_icache_snoops_remote_store)
-			r4k_blast_scache_page_indexed(page);
+			r4k_blast_scache_page_indexed(addr);
 	}
 	if (exec) {
 		if (cpu_has_vtag_icache) {
 			int cpu = smp_processor_id();
 
-			if (cpu_context(cpu, vma->vm_mm) != 0)
-				drop_mmu_context(vma->vm_mm, cpu);
+			if (cpu_context(cpu, mm) != 0)
+				drop_mmu_context(mm, cpu);
 		} else
-			r4k_blast_icache_page_indexed(page);
+			r4k_blast_icache_page_indexed(addr);
 	}
 }
 
-static void r4k_flush_cache_page(struct vm_area_struct *vma, unsigned long page, unsigned long pfn)
+static void r4k_flush_cache_page(struct vm_area_struct *vma,
+	unsigned long addr, unsigned long pfn)
 {
 	struct flush_cache_page_args args;
 
-	/*
-	 * If ownes no valid ASID yet, cannot possibly have gotten
-	 * this page into the cache.
-	 */
-	if (cpu_context(smp_processor_id(), vma->vm_mm) == 0)
-		return;
-
 	args.vma = vma;
-	args.page = page;
+	args.addr = addr;
 
 	on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
 }
@@ -454,16 +464,16 @@ static void r4k_flush_data_cache_page(unsigned long addr)
 }
 
 struct flush_icache_range_args {
-	unsigned long start;
-	unsigned long end;
+	unsigned long __user start;
+	unsigned long __user end;
 };
 
 static inline void local_r4k_flush_icache_range(void *args)
 {
 	struct flush_icache_range_args *fir_args = args;
-	unsigned long dc_lsize = current_cpu_data.dcache.linesz;
-	unsigned long ic_lsize = current_cpu_data.icache.linesz;
-	unsigned long sc_lsize = current_cpu_data.scache.linesz;
+	unsigned long dc_lsize = cpu_dcache_line_size();
+	unsigned long ic_lsize = cpu_icache_line_size();
+	unsigned long sc_lsize = cpu_scache_line_size();
 	unsigned long start = fir_args->start;
 	unsigned long end = fir_args->end;
 	unsigned long addr, aend;
@@ -472,6 +482,7 @@ static inline void local_r4k_flush_icache_range(void *args)
 		if (end - start > dcache_size) {
 			r4k_blast_dcache();
 		} else {
+			R4600_HIT_CACHEOP_WAR_IMPL;
 			addr = start & ~(dc_lsize - 1);
 			aend = (end - 1) & ~(dc_lsize - 1);
 
@@ -492,7 +503,7 @@ static inline void local_r4k_flush_icache_range(void *args)
 				aend = (end - 1) & ~(sc_lsize - 1);
 
 				while (1) {
-					/* Hit_Writeback_Inv_D */
+					/* Hit_Writeback_Inv_SD */
 					protected_writeback_scache_line(addr);
 					if (addr == aend)
 						break;
@@ -517,7 +528,8 @@ static inline void local_r4k_flush_icache_range(void *args)
 	}
 }
 
-static void r4k_flush_icache_range(unsigned long start, unsigned long end)
+static void r4k_flush_icache_range(unsigned long __user start,
+	unsigned long __user end)
 {
 	struct flush_icache_range_args args;
 
@@ -525,6 +537,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 	args.end = end;
 
 	on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
+	instruction_hazard();
 }
 
 /*
@@ -613,7 +626,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 	BUG_ON(size == 0);
 
 	if (cpu_has_subset_pcaches) {
-		unsigned long sc_lsize = current_cpu_data.scache.linesz;
+		unsigned long sc_lsize = cpu_scache_line_size();
 
 		if (size >= scache_size) {
 			r4k_blast_scache();
@@ -639,7 +652,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 	if (size >= dcache_size) {
 		r4k_blast_dcache();
 	} else {
-		unsigned long dc_lsize = current_cpu_data.dcache.linesz;
+		unsigned long dc_lsize = cpu_dcache_line_size();
 
 		R4600_HIT_CACHEOP_WAR_IMPL;
 		a = addr & ~(dc_lsize - 1);
@@ -663,7 +676,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 	BUG_ON(size == 0);
 
 	if (cpu_has_subset_pcaches) {
-		unsigned long sc_lsize = current_cpu_data.scache.linesz;
+		unsigned long sc_lsize = cpu_scache_line_size();
 
 		if (size >= scache_size) {
 			r4k_blast_scache();
@@ -684,7 +697,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 	if (size >= dcache_size) {
 		r4k_blast_dcache();
 	} else {
-		unsigned long dc_lsize = current_cpu_data.dcache.linesz;
+		unsigned long dc_lsize = cpu_dcache_line_size();
 
 		R4600_HIT_CACHEOP_WAR_IMPL;
 		a = addr & ~(dc_lsize - 1);
@@ -708,9 +721,9 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
  */
 static void local_r4k_flush_cache_sigtramp(void * arg)
 {
-	unsigned long ic_lsize = current_cpu_data.icache.linesz;
-	unsigned long dc_lsize = current_cpu_data.dcache.linesz;
-	unsigned long sc_lsize = current_cpu_data.scache.linesz;
+	unsigned long ic_lsize = cpu_icache_line_size();
+	unsigned long dc_lsize = cpu_dcache_line_size();
+	unsigned long sc_lsize = cpu_scache_line_size();
 	unsigned long addr = (unsigned long) arg;
 
 	R4600_HIT_CACHEOP_WAR_IMPL;
@@ -762,6 +775,7 @@ static inline void rm7k_erratum31(void)
 
 	for (addr = INDEX_BASE; addr <= INDEX_BASE + 4096; addr += ic_lsize) {
 		__asm__ __volatile__ (
+			".set push\n\t"
 			".set noreorder\n\t"
 			".set mips3\n\t"
 			"cache\t%1, 0(%0)\n\t"
@@ -776,8 +790,7 @@ static inline void rm7k_erratum31(void)
 			"cache\t%1, 0x1000(%0)\n\t"
 			"cache\t%1, 0x2000(%0)\n\t"
 			"cache\t%1, 0x3000(%0)\n\t"
-			".set\tmips0\n\t"
-			".set\treorder\n\t"
+			".set pop\n"
 			:
 			: "r" (addr), "i" (Index_Store_Tag_I), "i" (Fill));
 	}
@@ -1011,9 +1024,19 @@ static void __init probe_pcache(void)
 	 * normally they'd suffer from aliases but magic in the hardware deals
 	 * with that for us so we don't need to take care ourselves.
 	 */
-	if (c->cputype != CPU_R10000 && c->cputype != CPU_R12000)
-		if (c->dcache.waysize > PAGE_SIZE)
-		        c->dcache.flags |= MIPS_CACHE_ALIASES;
+	switch (c->cputype) {
+	case CPU_20KC:
+	case CPU_25KF:
+	case CPU_R10000:
+	case CPU_R12000:
+	case CPU_SB1:
+		break;
+	case CPU_24K:
+		if (!(read_c0_config7() & (1 << 16)))
+	default:
+			if (c->dcache.waysize > PAGE_SIZE)
+				c->dcache.flags |= MIPS_CACHE_ALIASES;
+	}
 
 	switch (c->cputype) {
 	case CPU_20KC:
@@ -1024,7 +1047,11 @@ static void __init probe_pcache(void)
 		c->icache.flags |= MIPS_CACHE_VTAG;
 		break;
 
+	case CPU_AU1000:
 	case CPU_AU1500:
+	case CPU_AU1100:
+	case CPU_AU1550:
+	case CPU_AU1200:
 		c->icache.flags |= MIPS_CACHE_IC_F_DC;
 		break;
 	}
@@ -1102,7 +1129,6 @@ static int __init probe_scache(void)
 	return 1;
 }
 
-typedef int (*probe_func_t)(unsigned long);
 extern int r5k_sc_init(void);
 extern int rm7k_sc_init(void);
 
@@ -1110,7 +1136,6 @@ static void __init setup_scache(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 	unsigned int config = read_c0_config();
-	probe_func_t probe_scache_kseg1;
 	int sc_present = 0;
 
 	/*
@@ -1123,8 +1148,7 @@ static void __init setup_scache(void)
 	case CPU_R4000MC:
 	case CPU_R4400SC:
 	case CPU_R4400MC:
-		probe_scache_kseg1 = (probe_func_t) (CKSEG1ADDR(&probe_scache));
-		sc_present = probe_scache_kseg1(config);
+		sc_present = run_uncached(probe_scache);
 		if (sc_present)
 			c->options |= MIPS_CPU_CACHE_CDEX_S;
 		break;
@@ -1198,7 +1222,7 @@ static inline void coherency_setup(void)
 	}
 }
 
-void __init ld_mmu_r4xx0(void)
+void __init r4k_cache_init(void)
 {
 	extern void build_clear_page(void);
 	extern void build_copy_page(void);
@@ -1206,15 +1230,11 @@ void __init ld_mmu_r4xx0(void)
 	struct cpuinfo_mips *c = &current_cpu_data;
 
 	/* Default cache error handler for R4000 and R5000 family */
-	memcpy((void *)(CAC_BASE   + 0x100), &except_vec2_generic, 0x80);
-	memcpy((void *)(UNCAC_BASE + 0x100), &except_vec2_generic, 0x80);
+	set_uncached_handler (0x100, &except_vec2_generic, 0x80);
 
 	probe_pcache();
 	setup_scache();
 
-	if (c->dcache.sets * c->dcache.ways > PAGE_SIZE)
-		c->dcache.flags |= MIPS_CACHE_ALIASES;
-
 	r4k_blast_dcache_page_setup();
 	r4k_blast_dcache_page_indexed_setup();
 	r4k_blast_dcache_setup();
@@ -1252,9 +1272,8 @@ void __init ld_mmu_r4xx0(void)
 	_dma_cache_inv		= r4k_dma_cache_inv;
 #endif
 
-	__flush_cache_all();
-	coherency_setup();
-
 	build_clear_page();
 	build_copy_page();
+	local_r4k___flush_cache_all(NULL);
+	coherency_setup();
 }
diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c
index 502f68c664b2..2f08b535f20e 100644
--- a/arch/mips/mm/c-sb1.c
+++ b/arch/mips/mm/c-sb1.c
@@ -235,7 +235,7 @@ static inline void __sb1_flush_icache_range(unsigned long start,
 /*
  * Invalidate all caches on this CPU
  */
-static void local_sb1___flush_cache_all(void)
+static void __attribute_used__ local_sb1___flush_cache_all(void)
 {
 	__sb1_writeback_inv_dcache_all();
 	__sb1_flush_icache_all();
@@ -492,19 +492,17 @@ static __init void probe_cache_sizes(void)
 }
 
 /*
- * This is called from loadmmu.c.  We have to set up all the
+ * This is called from cache.c.  We have to set up all the
  * memory management function pointers, as well as initialize
  * the caches and tlbs
  */
-void ld_mmu_sb1(void)
+void sb1_cache_init(void)
 {
 	extern char except_vec2_sb1;
 	extern char handle_vec2_sb1;
 
 	/* Special cache error handler for SB1 */
-	memcpy((void *)(CAC_BASE   + 0x100), &except_vec2_sb1, 0x80);
-	memcpy((void *)(UNCAC_BASE + 0x100), &except_vec2_sb1, 0x80);
-	memcpy((void *)CKSEG1ADDR(&handle_vec2_sb1), &handle_vec2_sb1, 0x80);
+	set_uncached_handler (0x100, &except_vec2_sb1, 0x80);
 
 	probe_cache_sizes();
 
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index ff5afab64b2f..0a97a9434eba 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -167,15 +167,16 @@ static void tx39_flush_cache_mm(struct mm_struct *mm)
 static void tx39_flush_cache_range(struct vm_area_struct *vma,
 	unsigned long start, unsigned long end)
 {
-	struct mm_struct *mm = vma->vm_mm;
+	int exec;
 
-	if (!cpu_has_dc_aliases)
+	if (!(cpu_context(smp_processor_id(), vma->vm_mm)))
 		return;
 
-	if (cpu_context(smp_processor_id(), mm) != 0) {
+	exec = vma->vm_flags & VM_EXEC;
+	if (cpu_has_dc_aliases || exec)
 		tx39_blast_dcache();
+	if (exec)
 		tx39_blast_icache();
-	}
 }
 
 static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page, unsigned long pfn)
@@ -183,6 +184,7 @@ static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page
 	int exec = vma->vm_flags & VM_EXEC;
 	struct mm_struct *mm = vma->vm_mm;
 	pgd_t *pgdp;
+	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep;
 
@@ -195,7 +197,8 @@ static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page
 
 	page &= PAGE_MASK;
 	pgdp = pgd_offset(mm, page);
-	pmdp = pmd_offset(pgdp, page);
+	pudp = pud_offset(pgdp, page);
+	pmdp = pmd_offset(pudp, page);
 	ptep = pte_offset(pmdp, page);
 
 	/*
@@ -407,7 +410,7 @@ static __init void tx39_probe_cache(void)
 	}
 }
 
-void __init ld_mmu_tx39(void)
+void __init tx39_cache_init(void)
 {
 	extern void build_clear_page(void);
 	extern void build_copy_page(void);
@@ -490,4 +493,5 @@ void __init ld_mmu_tx39(void)
 
 	build_clear_page();
 	build_copy_page();
+	tx39h_flush_icache_all();
 }
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 1d95cdb77bed..314701a66b13 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -23,8 +23,10 @@ void (*__flush_cache_all)(void);
 void (*flush_cache_mm)(struct mm_struct *mm);
 void (*flush_cache_range)(struct vm_area_struct *vma, unsigned long start,
 	unsigned long end);
-void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
-void (*flush_icache_range)(unsigned long start, unsigned long end);
+void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
+	unsigned long pfn);
+void (*flush_icache_range)(unsigned long __user start,
+	unsigned long __user end);
 void (*flush_icache_page)(struct vm_area_struct *vma, struct page *page);
 
 /* MIPS specific cache operations */
@@ -32,6 +34,8 @@ void (*flush_cache_sigtramp)(unsigned long addr);
 void (*flush_data_cache_page)(unsigned long addr);
 void (*flush_icache_all)(void);
 
+EXPORT_SYMBOL(flush_data_cache_page);
+
 #ifdef CONFIG_DMA_NONCOHERENT
 
 /* DMA cache operations. */
@@ -49,10 +53,12 @@ EXPORT_SYMBOL(_dma_cache_inv);
  * We could optimize the case where the cache argument is not BCACHE but
  * that seems very atypical use ...
  */
-asmlinkage int sys_cacheflush(unsigned long addr, unsigned long int bytes,
-	unsigned int cache)
+asmlinkage int sys_cacheflush(unsigned long __user addr,
+	unsigned long bytes, unsigned int cache)
 {
-	if (!access_ok(VERIFY_WRITE, (void *) addr, bytes))
+	if (bytes == 0)
+		return 0;
+	if (!access_ok(VERIFY_WRITE, (void __user *) addr, bytes))
 		return -EFAULT;
 
 	flush_icache_range(addr, addr + bytes);
@@ -100,58 +106,48 @@ void __update_cache(struct vm_area_struct *vma, unsigned long address,
 	}
 }
 
-extern void ld_mmu_r23000(void);
-extern void ld_mmu_r4xx0(void);
-extern void ld_mmu_tx39(void);
-extern void ld_mmu_r6000(void);
-extern void ld_mmu_tfp(void);
-extern void ld_mmu_andes(void);
-extern void ld_mmu_sb1(void);
+#define __weak __attribute__((weak))
+
+static char cache_panic[] __initdata = "Yeee, unsupported cache architecture.";
 
 void __init cpu_cache_init(void)
 {
-	if (cpu_has_4ktlb) {
-#if defined(CONFIG_CPU_R4X00)  || defined(CONFIG_CPU_VR41XX) || \
-    defined(CONFIG_CPU_R4300)  || defined(CONFIG_CPU_R5000)  || \
-    defined(CONFIG_CPU_NEVADA) || defined(CONFIG_CPU_R5432)  || \
-    defined(CONFIG_CPU_R5500)  || defined(CONFIG_CPU_MIPS32) || \
-    defined(CONFIG_CPU_MIPS64) || defined(CONFIG_CPU_TX49XX) || \
-    defined(CONFIG_CPU_RM7000) || defined(CONFIG_CPU_RM9000)
-		ld_mmu_r4xx0();
-#endif
-	} else switch (current_cpu_data.cputype) {
-#ifdef CONFIG_CPU_R3000
-	case CPU_R2000:
-	case CPU_R3000:
-	case CPU_R3000A:
-	case CPU_R3081E:
-		ld_mmu_r23000();
-		break;
-#endif
-#ifdef CONFIG_CPU_TX39XX
-	case CPU_TX3912:
-	case CPU_TX3922:
-	case CPU_TX3927:
-		ld_mmu_tx39();
-		break;
-#endif
-#ifdef CONFIG_CPU_R10000
-	case CPU_R10000:
-	case CPU_R12000:
-		ld_mmu_r4xx0();
-		break;
-#endif
-#ifdef CONFIG_CPU_SB1
-	case CPU_SB1:
-		ld_mmu_sb1();
-		break;
-#endif
-
-	case CPU_R8000:
-		panic("R8000 is unsupported");
-		break;
-
-	default:
-		panic("Yeee, unsupported cache architecture.");
+	if (cpu_has_3k_cache) {
+		extern void __weak r3k_cache_init(void);
+
+		r3k_cache_init();
+		return;
+	}
+	if (cpu_has_6k_cache) {
+		extern void __weak r6k_cache_init(void);
+
+		r6k_cache_init();
+		return;
+	}
+	if (cpu_has_4k_cache) {
+		extern void __weak r4k_cache_init(void);
+
+		r4k_cache_init();
+		return;
 	}
+	if (cpu_has_8k_cache) {
+		extern void __weak r8k_cache_init(void);
+
+		r8k_cache_init();
+		return;
+	}
+	if (cpu_has_tx39_cache) {
+		extern void __weak tx39_cache_init(void);
+
+		tx39_cache_init();
+		return;
+	}
+	if (cpu_has_sb1_cache) {
+		extern void __weak sb1_cache_init(void);
+
+		sb1_cache_init();
+		return;
+	}
+
+	panic(cache_panic);
 }
diff --git a/arch/mips/mm/cerr-sb1.c b/arch/mips/mm/cerr-sb1.c
index 7166ffe63502..1cf3c6006ccd 100644
--- a/arch/mips/mm/cerr-sb1.c
+++ b/arch/mips/mm/cerr-sb1.c
@@ -19,13 +19,19 @@
 #include <linux/sched.h>
 #include <asm/mipsregs.h>
 #include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
 
-#ifndef CONFIG_SIBYTE_BUS_WATCHER
+#if !defined(CONFIG_SIBYTE_BUS_WATCHER) || defined(CONFIG_SIBYTE_BW_TRACE)
 #include <asm/io.h>
-#include <asm/sibyte/sb1250_regs.h>
 #include <asm/sibyte/sb1250_scd.h>
 #endif
 
+/*
+ * We'd like to dump the L2_ECC_TAG register on errors, but errata make
+ * that unsafe... So for now we don't.  (BCM1250/BCM112x erratum SOC-48.)
+ */
+#undef DUMP_L2_ECC_TAG_ON_ERROR
+
 /* SB1 definitions */
 
 /* XXX should come from config1 XXX */
@@ -139,12 +145,18 @@ static inline void breakout_cerrd(unsigned int val)
 static void check_bus_watcher(void)
 {
 	uint32_t status, l2_err, memio_err;
+#ifdef DUMP_L2_ECC_TAG_ON_ERROR
+	uint64_t l2_tag;
+#endif
 
 	/* Destructive read, clears register and interrupt */
 	status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS));
 	/* Bit 31 is always on, but there's no #define for that */
 	if (status & ~(1UL << 31)) {
 		l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS));
+#ifdef DUMP_L2_ECC_TAG_ON_ERROR
+		l2_tag = in64(IO_SPACE_BASE | A_L2_ECC_TAG);
+#endif
 		memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
 		prom_printf("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
 		prom_printf("\nLast recorded signature:\n");
@@ -153,6 +165,9 @@ static void check_bus_watcher(void)
 		       (int)(G_SCD_BERR_TID(status) >> 6),
 		       (int)G_SCD_BERR_RID(status),
 		       (int)G_SCD_BERR_DCODE(status));
+#ifdef DUMP_L2_ECC_TAG_ON_ERROR
+		prom_printf("Last L2 tag w/ bad ECC: %016llx\n", l2_tag);
+#endif
 	} else {
 		prom_printf("Bus watcher indicates no error\n");
 	}
@@ -166,6 +181,16 @@ asmlinkage void sb1_cache_error(void)
 	uint64_t cerr_dpa;
 	uint32_t errctl, cerr_i, cerr_d, dpalo, dpahi, eepc, res;
 
+#ifdef CONFIG_SIBYTE_BW_TRACE
+	/* Freeze the trace buffer now */
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+	csr_out32(M_BCM1480_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+#else
+	csr_out32(M_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+#endif
+	prom_printf("Trace buffer frozen\n");
+#endif
+
 	prom_printf("Cache error exception on CPU %x:\n",
 		    (read_c0_prid() >> 25) & 0x7);
 
@@ -229,11 +254,19 @@ asmlinkage void sb1_cache_error(void)
 
 	check_bus_watcher();
 
-	while (1);
 	/*
-	 * This tends to make things get really ugly; let's just stall instead.
-	 *    panic("Can't handle the cache error!");
+	 * Calling panic() when a fatal cache error occurs scrambles the
+	 * state of the system (and the cache), making it difficult to
+	 * investigate after the fact.  However, if you just stall the CPU,
+	 * the other CPU may keep on running, which is typically very
+	 * undesirable.
 	 */
+#ifdef CONFIG_SB1_CERR_STALL
+	while (1)
+		;
+#else
+	panic("unhandled cache error");
+#endif
 }
 
 
@@ -434,7 +467,8 @@ static struct dc_state dc_states[] = {
 };
 
 #define DC_TAG_VALID(state) \
-    (((state) == 0xf) || ((state) == 0x13) || ((state) == 0x19) || ((state == 0x16)) || ((state) == 0x1c))
+    (((state) == 0x0) || ((state) == 0xf) || ((state) == 0x13) || \
+     ((state) == 0x19) || ((state) == 0x16) || ((state) == 0x1c))
 
 static char *dc_state_str(unsigned char state)
 {
@@ -505,6 +539,7 @@ static uint32_t extract_dc(unsigned short addr, int data)
 			uint64_t datalo;
 			uint32_t datalohi, datalolo, datahi;
 			int offset;
+			char bad_ecc = 0;
 
 			for (offset = 0; offset < 4; offset++) {
 				/* Index-load-data-D */
@@ -525,8 +560,7 @@ static uint32_t extract_dc(unsigned short addr, int data)
 				ecc = dc_ecc(datalo);
 				if (ecc != datahi) {
 					int bits = 0;
-					prom_printf("  ** bad ECC (%02x %02x) ->",
-						    datahi, ecc);
+					bad_ecc |= 1 << (3-offset);
 					ecc ^= datahi;
 					while (ecc) {
 						if (ecc & 1) bits++;
@@ -537,6 +571,10 @@ static uint32_t extract_dc(unsigned short addr, int data)
 				prom_printf("  %02X-%016llX", datahi, datalo);
 			}
 			prom_printf("\n");
+			if (bad_ecc)
+				prom_printf("  dwords w/ bad ECC: %d %d %d %d\n",
+					    !!(bad_ecc & 8), !!(bad_ecc & 4),
+					    !!(bad_ecc & 2), !!(bad_ecc & 1));
 		}
 	}
 	return res;
diff --git a/arch/mips/mm/cex-sb1.S b/arch/mips/mm/cex-sb1.S
index 2c3a23aa88c3..0e71580774ff 100644
--- a/arch/mips/mm/cex-sb1.S
+++ b/arch/mips/mm/cex-sb1.S
@@ -64,6 +64,10 @@ LEAF(except_vec2_sb1)
 	sd	k0,0x170($0)
 	sd	k1,0x178($0)
 
+#if CONFIG_SB1_CEX_ALWAYS_FATAL
+	j	handle_vec2_sb1
+	 nop
+#else
 	/*
 	 * M_ERRCTL_RECOVERABLE is bit 31, which makes it easy to tell
 	 * if we can fast-path out of here for a h/w-recovered error.
@@ -134,6 +138,7 @@ unrecoverable:
 	/* Unrecoverable Icache or Dcache error; log it and/or fail */
 	j	handle_vec2_sb1
 	 nop
+#endif
 
 END(except_vec2_sb1)
 
diff --git a/arch/mips/mm/dma-coherent.c b/arch/mips/mm/dma-coherent.c
index 97a50d38c98f..f6b3c722230c 100644
--- a/arch/mips/mm/dma-coherent.c
+++ b/arch/mips/mm/dma-coherent.c
@@ -9,16 +9,16 @@
  */
 #include <linux/config.h>
 #include <linux/types.h>
+#include <linux/dma-mapping.h>
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/string.h>
-#include <linux/pci.h>
 
 #include <asm/cache.h>
 #include <asm/io.h>
 
 void *dma_alloc_noncoherent(struct device *dev, size_t size,
-	dma_addr_t * dma_handle, int gfp)
+	dma_addr_t * dma_handle, gfp_t gfp)
 {
 	void *ret;
 	/* ignore region specifiers */
@@ -39,7 +39,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size,
 EXPORT_SYMBOL(dma_alloc_noncoherent);
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-	dma_addr_t * dma_handle, int gfp)
+	dma_addr_t * dma_handle, gfp_t gfp)
 	__attribute__((alias("dma_alloc_noncoherent")));
 
 EXPORT_SYMBOL(dma_alloc_coherent);
diff --git a/arch/mips/mm/dma-ip27.c b/arch/mips/mm/dma-ip27.c
index aa7c94b5d781..8da19fd22ac6 100644
--- a/arch/mips/mm/dma-ip27.c
+++ b/arch/mips/mm/dma-ip27.c
@@ -22,7 +22,7 @@
 	pdev_to_baddr(to_pci_dev(dev), (addr))
 
 void *dma_alloc_noncoherent(struct device *dev, size_t size,
-	dma_addr_t * dma_handle, int gfp)
+	dma_addr_t * dma_handle, gfp_t gfp)
 {
 	void *ret;
 
@@ -44,7 +44,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size,
 EXPORT_SYMBOL(dma_alloc_noncoherent);
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-	dma_addr_t * dma_handle, int gfp)
+	dma_addr_t * dma_handle, gfp_t gfp)
 	__attribute__((alias("dma_alloc_noncoherent")));
 
 EXPORT_SYMBOL(dma_alloc_coherent);
diff --git a/arch/mips/mm/dma-ip32.c b/arch/mips/mm/dma-ip32.c
index 2cbe196c35fb..a7e3072ff78d 100644
--- a/arch/mips/mm/dma-ip32.c
+++ b/arch/mips/mm/dma-ip32.c
@@ -37,7 +37,7 @@
 #define RAM_OFFSET_MASK	0x3fffffff
 
 void *dma_alloc_noncoherent(struct device *dev, size_t size,
-	dma_addr_t * dma_handle, int gfp)
+	dma_addr_t * dma_handle, gfp_t gfp)
 {
 	void *ret;
 	/* ignore region specifiers */
@@ -61,7 +61,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size,
 EXPORT_SYMBOL(dma_alloc_noncoherent);
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-	dma_addr_t * dma_handle, int gfp)
+	dma_addr_t * dma_handle, gfp_t gfp)
 {
 	void *ret;
 
diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c
index 59e54f12212e..cd4ea8474f89 100644
--- a/arch/mips/mm/dma-noncoherent.c
+++ b/arch/mips/mm/dma-noncoherent.c
@@ -24,7 +24,7 @@
  */
 
 void *dma_alloc_noncoherent(struct device *dev, size_t size,
-	dma_addr_t * dma_handle, int gfp)
+	dma_addr_t * dma_handle, gfp_t gfp)
 {
 	void *ret;
 	/* ignore region specifiers */
@@ -45,7 +45,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size,
 EXPORT_SYMBOL(dma_alloc_noncoherent);
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-	dma_addr_t * dma_handle, int gfp)
+	dma_addr_t * dma_handle, gfp_t gfp)
 {
 	void *ret;
 
@@ -105,22 +105,7 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 {
 	unsigned long addr = (unsigned long) ptr;
 
-	switch (direction) {
-	case DMA_TO_DEVICE:
-		dma_cache_wback(addr, size);
-		break;
-
-	case DMA_FROM_DEVICE:
-		dma_cache_inv(addr, size);
-		break;
-
-	case DMA_BIDIRECTIONAL:
-		dma_cache_wback_inv(addr, size);
-		break;
-
-	default:
-		BUG();
-	}
+	__dma_sync(addr, size, direction);
 
 	return virt_to_phys(ptr);
 }
@@ -133,22 +118,7 @@ void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 	unsigned long addr;
 	addr = dma_addr + PAGE_OFFSET;
 
-	switch (direction) {
-	case DMA_TO_DEVICE:
-		//dma_cache_wback(addr, size);
-		break;
-
-	case DMA_FROM_DEVICE:
-		//dma_cache_inv(addr, size);
-		break;
-
-	case DMA_BIDIRECTIONAL:
-		//dma_cache_wback_inv(addr, size);
-		break;
-
-	default:
-		BUG();
-	}
+	//__dma_sync(addr, size, direction);
 }
 
 EXPORT_SYMBOL(dma_unmap_single);
@@ -164,10 +134,11 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 		unsigned long addr;
 
 		addr = (unsigned long) page_address(sg->page);
-		if (addr)
+		if (addr) {
 			__dma_sync(addr + sg->offset, sg->length, direction);
-		sg->dma_address = (dma_addr_t)
-			(page_to_phys(sg->page) + sg->offset);
+			sg->dma_address = (dma_addr_t)page_to_phys(sg->page)
+					  + sg->offset;
+		}
 	}
 
 	return nents;
@@ -218,9 +189,8 @@ void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 
 	for (i = 0; i < nhwentries; i++, sg++) {
 		addr = (unsigned long) page_address(sg->page);
-		if (!addr)
-			continue;
-		dma_cache_wback_inv(addr + sg->offset, sg->length);
+		if (addr)
+			__dma_sync(addr + sg->offset, sg->length, direction);
 	}
 }
 
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index ec8077c74e9c..2d9624fd10ec 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -25,6 +25,7 @@
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
+#include <asm/highmem.h>		/* For VMALLOC_END */
 
 /*
  * This routine handles page faults.  It determines the address,
@@ -57,7 +58,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
 	 * only copy the information from the master page table,
 	 * nothing more.
 	 */
-	if (unlikely(address >= VMALLOC_START))
+	if (unlikely(address >= VMALLOC_START && address <= VMALLOC_END))
 		goto vmalloc_fault;
 
 	/*
@@ -140,7 +141,7 @@ bad_area_nosemaphore:
 		info.si_signo = SIGSEGV;
 		info.si_errno = 0;
 		/* info.si_code has been set above */
-		info.si_addr = (void *) address;
+		info.si_addr = (void __user *) address;
 		force_sig_info(SIGSEGV, &info, tsk);
 		return;
 	}
@@ -196,7 +197,7 @@ do_sigbus:
 	info.si_signo = SIGBUS;
 	info.si_errno = 0;
 	info.si_code = BUS_ADRERR;
-	info.si_addr = (void *) address;
+	info.si_addr = (void __user *) address;
 	force_sig_info(SIGBUS, &info, tsk);
 
 	return;
@@ -212,6 +213,7 @@ vmalloc_fault:
 		 */
 		int offset = __pgd_offset(address);
 		pgd_t *pgd, *pgd_k;
+		pud_t *pud, *pud_k;
 		pmd_t *pmd, *pmd_k;
 		pte_t *pte_k;
 
@@ -222,8 +224,13 @@ vmalloc_fault:
 			goto no_context;
 		set_pgd(pgd, *pgd_k);
 
-		pmd = pmd_offset(pgd, address);
-		pmd_k = pmd_offset(pgd_k, address);
+		pud = pud_offset(pgd, address);
+		pud_k = pud_offset(pgd_k, address);
+		if (!pud_present(*pud_k))
+			goto no_context;
+
+		pmd = pmd_offset(pud, address);
+		pmd_k = pmd_offset(pud_k, address);
 		if (!pmd_present(*pmd_k))
 			goto no_context;
 		set_pmd(pmd, *pmd_k);
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index dd5e2e31885b..1f7b37b38f5c 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -83,6 +83,25 @@ void __kunmap_atomic(void *kvaddr, enum km_type type)
 	preempt_check_resched();
 }
 
+/*
+ * This is the same as kmap_atomic() but can map memory that doesn't
+ * have a struct page associated with it.
+ */
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
+{
+	enum fixed_addresses idx;
+	unsigned long vaddr;
+
+	inc_preempt_count();
+
+	idx = type + KM_TYPE_NR*smp_processor_id();
+	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+	set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot));
+	flush_tlb_one(vaddr);
+
+	return (void*) vaddr;
+}
+
 struct page *__kmap_atomic_to_page(void *ptr)
 {
 	unsigned long idx, vaddr = (unsigned long)ptr;
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index dc6830b10fab..f75ab748e8cd 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -83,7 +83,7 @@ pte_t *kmap_pte;
 pgprot_t kmap_prot;
 
 #define kmap_get_fixmap_pte(vaddr)					\
-	pte_offset_kernel(pmd_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr))
+	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
 
 static void __init kmap_init(void)
 {
@@ -96,36 +96,42 @@ static void __init kmap_init(void)
 	kmap_prot = PAGE_KERNEL;
 }
 
-#ifdef CONFIG_64BIT
-static void __init fixrange_init(unsigned long start, unsigned long end,
+#ifdef CONFIG_32BIT
+void __init fixrange_init(unsigned long start, unsigned long end,
 	pgd_t *pgd_base)
 {
 	pgd_t *pgd;
+	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
-	int i, j;
+	int i, j, k;
 	unsigned long vaddr;
 
 	vaddr = start;
 	i = __pgd_offset(vaddr);
-	j = __pmd_offset(vaddr);
+	j = __pud_offset(vaddr);
+	k = __pmd_offset(vaddr);
 	pgd = pgd_base + i;
 
 	for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) {
-		pmd = (pmd_t *)pgd;
-		for (; (j < PTRS_PER_PMD) && (vaddr != end); pmd++, j++) {
-			if (pmd_none(*pmd)) {
-				pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
-				set_pmd(pmd, __pmd(pte));
-				if (pte != pte_offset_kernel(pmd, 0))
-					BUG();
+		pud = (pud_t *)pgd;
+		for ( ; (j < PTRS_PER_PUD) && (vaddr != end); pud++, j++) {
+			pmd = (pmd_t *)pud;
+			for (; (k < PTRS_PER_PMD) && (vaddr != end); pmd++, k++) {
+				if (pmd_none(*pmd)) {
+					pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+					set_pmd(pmd, __pmd(pte));
+					if (pte != pte_offset_kernel(pmd, 0))
+						BUG();
+				}
+				vaddr += PMD_SIZE;
 			}
-			vaddr += PMD_SIZE;
+			k = 0;
 		}
 		j = 0;
 	}
 }
-#endif /* CONFIG_64BIT */
+#endif /* CONFIG_32BIT */
 #endif /* CONFIG_HIGHMEM */
 
 #ifndef CONFIG_NEED_MULTIPLE_NODES
diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c
index adf352273f63..3101d1db5592 100644
--- a/arch/mips/mm/ioremap.c
+++ b/arch/mips/mm/ioremap.c
@@ -55,7 +55,7 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address,
 	if (address >= end)
 		BUG();
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -77,11 +77,15 @@ static int remap_area_pages(unsigned long address, phys_t phys_addr,
 	flush_cache_all();
 	if (address >= end)
 		BUG();
-	spin_lock(&init_mm.page_table_lock);
 	do {
+		pud_t *pud;
 		pmd_t *pmd;
-		pmd = pmd_alloc(&init_mm, dir, address);
+
 		error = -ENOMEM;
+		pud = pud_alloc(&init_mm, dir, address);
+		if (!pud)
+			break;
+		pmd = pmd_alloc(&init_mm, pud, address);
 		if (!pmd)
 			break;
 		if (remap_area_pmd(pmd, address, end - address,
@@ -91,21 +95,11 @@ static int remap_area_pages(unsigned long address, phys_t phys_addr,
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	} while (address && (address < end));
-	spin_unlock(&init_mm.page_table_lock);
 	flush_tlb_all();
 	return error;
 }
 
 /*
- * Allow physical addresses to be fixed up to help 36 bit peripherals.
- */
-phys_t __attribute__ ((weak))
-fixup_bigphys_addr(phys_t phys_addr, phys_t size)
-{
-	return phys_addr;
-}
-
-/*
  * Generic mapping function (not visible outside):
  */
 
@@ -121,7 +115,7 @@ fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 
 #define IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL))
 
-void * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags)
+void __iomem * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags)
 {
 	struct vm_struct * area;
 	unsigned long offset;
@@ -141,7 +135,7 @@ void * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags)
 	 */
 	if (IS_LOW512(phys_addr) && IS_LOW512(last_addr) &&
 	    flags == _CACHE_UNCACHED)
-		return (void *) KSEG1ADDR(phys_addr);
+		return (void __iomem *) CKSEG1ADDR(phys_addr);
 
 	/*
 	 * Don't allow anybody to remap normal RAM that we're using..
@@ -177,10 +171,10 @@ void * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags)
 		return NULL;
 	}
 
-	return (void *) (offset + (char *)addr);
+	return (void __iomem *) (offset + (char *)addr);
 }
 
-#define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == KSEG1)
+#define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
 
 void __iounmap(volatile void __iomem *addr)
 {
@@ -190,10 +184,8 @@ void __iounmap(volatile void __iomem *addr)
 		return;
 
 	p = remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr));
-	if (!p) {
+	if (!p)
 		printk(KERN_ERR "iounmap: bad address %p\n", addr);
-		return;
-	}
 
         kfree(p);
 }
diff --git a/arch/mips/mm/pg-r4k.c b/arch/mips/mm/pg-r4k.c
index 9f8b16541577..f51e180072e3 100644
--- a/arch/mips/mm/pg-r4k.c
+++ b/arch/mips/mm/pg-r4k.c
@@ -25,7 +25,10 @@
 #include <asm/cpu.h>
 #include <asm/war.h>
 
-#define half_scache_line_size()		(cpu_scache_line_size() >> 1)
+#define half_scache_line_size()	(cpu_scache_line_size() >> 1)
+#define cpu_is_r4600_v1_x()	((read_c0_prid() & 0xfffffff0) == 0x00002010)
+#define cpu_is_r4600_v2_x()	((read_c0_prid() & 0xfffffff0) == 0x00002020)
+
 
 /*
  * Maximum sizes:
@@ -198,15 +201,15 @@ static inline void build_cdex_p(void)
 	if (store_offset & (cpu_dcache_line_size() - 1))
 		return;
 
-	if (R4600_V1_HIT_CACHEOP_WAR && ((read_c0_prid() & 0xfff0) == 0x2010)) {
+	if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
 		build_nop();
 		build_nop();
 		build_nop();
 		build_nop();
 	}
 
-	if (R4600_V2_HIT_CACHEOP_WAR && ((read_c0_prid() & 0xfff0) == 0x2020))
-		build_insn_word(0x8c200000);	/* lw      $zero, ($at) */
+	if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+		build_insn_word(0x3c01a000);	/* lui     $at, 0xa000  */
 
 	mi.c_format.opcode     = cache_op;
 	mi.c_format.rs         = 4;		/* $a0 */
@@ -361,7 +364,7 @@ void __init build_clear_page(void)
 
 	build_addiu_a2_a0(PAGE_SIZE - (cpu_has_prefetch ? pref_offset_clear : 0));
 
-	if (R4600_V2_HIT_CACHEOP_WAR && ((read_c0_prid() & 0xfff0) == 0x2020))
+	if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
 		build_insn_word(0x3c01a000);	/* lui     $at, 0xa000  */
 
 dest = label();
@@ -404,9 +407,6 @@ dest = label();
 
 	build_jr_ra();
 
-	flush_icache_range((unsigned long)&clear_page_array,
-	                   (unsigned long) epc);
-
 	BUG_ON(epc > clear_page_array + ARRAY_SIZE(clear_page_array));
 }
 
@@ -420,7 +420,7 @@ void __init build_copy_page(void)
 
 	build_addiu_a2_a0(PAGE_SIZE - (cpu_has_prefetch ? pref_offset_copy : 0));
 
-	if (R4600_V2_HIT_CACHEOP_WAR && ((read_c0_prid() & 0xfff0) == 0x2020))
+	if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
 		build_insn_word(0x3c01a000);	/* lui     $at, 0xa000  */
 
 dest = label();
@@ -482,8 +482,5 @@ dest = label();
 
 	build_jr_ra();
 
-	flush_icache_range((unsigned long)&copy_page_array,
-	                   (unsigned long) epc);
-
 	BUG_ON(epc > copy_page_array + ARRAY_SIZE(copy_page_array));
 }
diff --git a/arch/mips/mm/pg-sb1.c b/arch/mips/mm/pg-sb1.c
index 1b6df7133c1e..148c65b9cd8b 100644
--- a/arch/mips/mm/pg-sb1.c
+++ b/arch/mips/mm/pg-sb1.c
@@ -60,7 +60,8 @@ static inline void clear_page_cpu(void *page)
 	"	.set	noreorder	\n"
 #ifdef CONFIG_CPU_HAS_PREFETCH
 	"	daddiu	%0, %0, 128	\n"
-	"	pref	" SB1_PREF_STORE_STREAMED_HINT ", -128(%0)  \n"  /* Prefetch the first 4 lines */
+	"	pref	" SB1_PREF_STORE_STREAMED_HINT ", -128(%0)  \n"
+					     /* Prefetch the first 4 lines */
 	"	pref	" SB1_PREF_STORE_STREAMED_HINT ",  -96(%0)  \n"
 	"	pref	" SB1_PREF_STORE_STREAMED_HINT ",  -64(%0)  \n"
 	"	pref	" SB1_PREF_STORE_STREAMED_HINT ",  -32(%0)  \n"
@@ -106,7 +107,8 @@ static inline void copy_page_cpu(void *to, void *from)
 #ifdef CONFIG_CPU_HAS_PREFETCH
 	"	daddiu	%0, %0, 128	\n"
 	"	daddiu	%1, %1, 128	\n"
-	"	pref	" SB1_PREF_LOAD_STREAMED_HINT  ", -128(%0)\n"  /* Prefetch the first 4 lines */
+	"	pref	" SB1_PREF_LOAD_STREAMED_HINT  ", -128(%0)\n"
+					     /* Prefetch the first 4 lines */
 	"	pref	" SB1_PREF_STORE_STREAMED_HINT ", -128(%1)\n"
 	"	pref	" SB1_PREF_LOAD_STREAMED_HINT  ",  -96(%0)\n"
 	"	pref	" SB1_PREF_STORE_STREAMED_HINT ",  -96(%1)\n"
@@ -207,66 +209,73 @@ typedef struct dmadscr_s {
 	u64 pad_b;
 } dmadscr_t;
 
-static dmadscr_t page_descr[NR_CPUS] __attribute__((aligned(SMP_CACHE_BYTES)));
+static dmadscr_t page_descr[DM_NUM_CHANNELS]
+	__attribute__((aligned(SMP_CACHE_BYTES)));
 
 void sb1_dma_init(void)
 {
-	int cpu = smp_processor_id();
-	u64 base_val = CPHYSADDR(&page_descr[cpu]) | V_DM_DSCR_BASE_RINGSZ(1);
+	int i;
 
-	bus_writeq(base_val,
-		   (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
-	bus_writeq(base_val | M_DM_DSCR_BASE_RESET,
-		   (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
-	bus_writeq(base_val | M_DM_DSCR_BASE_ENABL,
-		   (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+	for (i = 0; i < DM_NUM_CHANNELS; i++) {
+		const u64 base_val = CPHYSADDR(&page_descr[i]) |
+				     V_DM_DSCR_BASE_RINGSZ(1);
+		volatile void *base_reg =
+			IOADDR(A_DM_REGISTER(i, R_DM_DSCR_BASE));
+
+		__raw_writeq(base_val, base_reg);
+		__raw_writeq(base_val | M_DM_DSCR_BASE_RESET, base_reg);
+		__raw_writeq(base_val | M_DM_DSCR_BASE_ENABL, base_reg);
+	}
 }
 
 void clear_page(void *page)
 {
-	int cpu = smp_processor_id();
+	u64 to_phys = CPHYSADDR(page);
+	unsigned int cpu = smp_processor_id();
 
-	/* if the page is above Kseg0, use old way */
+	/* if the page is not in KSEG0, use old way */
 	if ((long)KSEGX(page) != (long)CKSEG0)
 		return clear_page_cpu(page);
 
-	page_descr[cpu].dscr_a = CPHYSADDR(page) | M_DM_DSCRA_ZERO_MEM | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
+	page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_ZERO_MEM |
+				 M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
 	page_descr[cpu].dscr_b = V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
-	bus_writeq(1, (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
+	__raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
 
 	/*
 	 * Don't really want to do it this way, but there's no
 	 * reliable way to delay completion detection.
 	 */
-	while (!(bus_readq((void *)(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)) &
-			   M_DM_DSCR_BASE_INTERRUPT))))
+	while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)))
+		 & M_DM_DSCR_BASE_INTERRUPT))
 		;
-	bus_readq((void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+	__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
 }
 
 void copy_page(void *to, void *from)
 {
-	unsigned long from_phys = CPHYSADDR(from);
-	unsigned long to_phys = CPHYSADDR(to);
-	int cpu = smp_processor_id();
+	u64 from_phys = CPHYSADDR(from);
+	u64 to_phys = CPHYSADDR(to);
+	unsigned int cpu = smp_processor_id();
 
-	/* if either page is above Kseg0, use old way */
+	/* if any page is not in KSEG0, use old way */
 	if ((long)KSEGX(to) != (long)CKSEG0
 	    || (long)KSEGX(from) != (long)CKSEG0)
 		return copy_page_cpu(to, from);
 
-	page_descr[cpu].dscr_a = CPHYSADDR(to_phys) | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
-	page_descr[cpu].dscr_b = CPHYSADDR(from_phys) | V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
-	bus_writeq(1, (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
+	page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_L2C_DEST |
+				 M_DM_DSCRA_INTERRUPT;
+	page_descr[cpu].dscr_b = from_phys | V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
+	__raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
 
 	/*
 	 * Don't really want to do it this way, but there's no
 	 * reliable way to delay completion detection.
 	 */
-	while (!(bus_readq((void *)(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)) &
-				    M_DM_DSCR_BASE_INTERRUPT))))
+	while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)))
+		 & M_DM_DSCR_BASE_INTERRUPT))
 		;
-	bus_readq((void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+	__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
 }
 
 #else /* !CONFIG_SIBYTE_DMA_PAGEOPS */
diff --git a/arch/mips/mm/pgtable-32.c b/arch/mips/mm/pgtable-32.c
index 4f07f81e8500..4a3c4919e314 100644
--- a/arch/mips/mm/pgtable-32.c
+++ b/arch/mips/mm/pgtable-32.c
@@ -10,6 +10,7 @@
 #include <linux/mm.h>
 #include <linux/bootmem.h>
 #include <linux/highmem.h>
+#include <asm/fixmap.h>
 #include <asm/pgtable.h>
 
 void pgd_init(unsigned long page)
@@ -29,42 +30,12 @@ void pgd_init(unsigned long page)
 	}
 }
 
-#ifdef CONFIG_HIGHMEM
-static void __init fixrange_init (unsigned long start, unsigned long end,
-	pgd_t *pgd_base)
-{
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *pte;
-	int i, j;
-	unsigned long vaddr;
-
-	vaddr = start;
-	i = __pgd_offset(vaddr);
-	j = __pmd_offset(vaddr);
-	pgd = pgd_base + i;
-
-	for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) {
-		pmd = (pmd_t *)pgd;
-		for (; (j < PTRS_PER_PMD) && (vaddr != end); pmd++, j++) {
-			if (pmd_none(*pmd)) {
-				pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
-				set_pmd(pmd, __pmd((unsigned long)pte));
-				if (pte != pte_offset_kernel(pmd, 0))
-					BUG();
-			}
-			vaddr += PMD_SIZE;
-		}
-		j = 0;
-	}
-}
-#endif
-
 void __init pagetable_init(void)
 {
 #ifdef CONFIG_HIGHMEM
 	unsigned long vaddr;
 	pgd_t *pgd, *pgd_base;
+	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
 #endif
@@ -90,7 +61,8 @@ void __init pagetable_init(void)
 	fixrange_init(vaddr, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base);
 
 	pgd = swapper_pg_dir + __pgd_offset(vaddr);
-	pmd = pmd_offset(pgd, vaddr);
+	pud = pud_offset(pgd, vaddr);
+	pmd = pmd_offset(pud, vaddr);
 	pte = pte_offset_kernel(pmd, vaddr);
 	pkmap_page_table = pte;
 #endif
diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c
index 4e92f931aaba..9e8ff8badb19 100644
--- a/arch/mips/mm/sc-rm7k.c
+++ b/arch/mips/mm/sc-rm7k.c
@@ -15,6 +15,7 @@
 #include <asm/cacheops.h>
 #include <asm/mipsregs.h>
 #include <asm/processor.h>
+#include <asm/cacheflush.h> /* for run_uncached() */
 
 /* Primary cache parameters. */
 #define sc_lsize	32
@@ -96,25 +97,13 @@ static void rm7k_sc_inv(unsigned long addr, unsigned long size)
 }
 
 /*
- * This function is executed in the uncached segment CKSEG1.
- * It must not touch the stack, because the stack pointer still points
- * into CKSEG0.
- *
- * Three options:
- *	- Write it in assembly and guarantee that we don't use the stack.
- *	- Disable caching for CKSEG0 before calling it.
- *	- Pray that GCC doesn't randomly start using the stack.
- *
- * This being Linux, we obviously take the least sane of those options -
- * following DaveM's lead in c-r4k.c
- *
- * It seems we get our kicks from relying on unguaranteed behaviour in GCC
+ * This function is executed in uncached address space.
  */
 static __init void __rm7k_sc_enable(void)
 {
 	int i;
 
-	set_c0_config(1 << 3);				/* CONF_SE */
+	set_c0_config(RM7K_CONF_SE);
 
 	write_c0_taglo(0);
 	write_c0_taghi(0);
@@ -127,24 +116,22 @@ static __init void __rm7k_sc_enable(void)
 		      ".set mips0\n\t"
 		      ".set reorder"
 		      :
-		      : "r" (KSEG0ADDR(i)), "i" (Index_Store_Tag_SD));
+		      : "r" (CKSEG0ADDR(i)), "i" (Index_Store_Tag_SD));
 	}
 }
 
 static __init void rm7k_sc_enable(void)
 {
-	void (*func)(void) = (void *) KSEG1ADDR(&__rm7k_sc_enable);
-
-	if (read_c0_config() & 0x08)			/* CONF_SE */
+	if (read_c0_config() & RM7K_CONF_SE)
 		return;
 
-	printk(KERN_INFO "Enabling secondary cache...");
-	func();
+	printk(KERN_INFO "Enabling secondary cache...\n");
+	run_uncached(__rm7k_sc_enable);
 }
 
 static void rm7k_sc_disable(void)
 {
-	clear_c0_config(1<<3);				/* CONF_SE */
+	clear_c0_config(RM7K_CONF_SE);
 }
 
 struct bcache_ops rm7k_sc_ops = {
@@ -158,19 +145,19 @@ void __init rm7k_sc_init(void)
 {
 	unsigned int config = read_c0_config();
 
-	if ((config >> 31) & 1)		/* Bit 31 set -> no S-Cache */
+	if ((config & RM7K_CONF_SC))
 		return;
 
 	printk(KERN_INFO "Secondary cache size %dK, linesize %d bytes.\n",
 	       (scache_size >> 10), sc_lsize);
 
-	if (!((config >> 3) & 1))	/* CONF_SE */
+	if (!(config & RM7K_CONF_SE))
 		rm7k_sc_enable();
 
 	/*
 	 * While we're at it let's deal with the tertiary cache.
 	 */
-	if (!((config >> 17) & 1)) {
+	if (!(config & RM7K_CONF_TC)) {
 
 		/*
 		 * We can't enable the L3 cache yet. There may be board-specific
@@ -183,9 +170,9 @@ void __init rm7k_sc_init(void)
 		 * to probe it.
 		 */
 		printk(KERN_INFO "Tertiary cache present, %s enabled\n",
-		       config&(1<<12) ? "already" : "not (yet)");
+		       (config & RM7K_CONF_TE) ? "already" : "not (yet)");
 
-		if ((config >> 12) & 1)
+		if ((config & RM7K_CONF_TE))
 			rm7k_tcache_enabled = 1;
 	}
 
diff --git a/arch/mips/mm/tlb-andes.c b/arch/mips/mm/tlb-andes.c
index 167e08e9661a..3f422a849c41 100644
--- a/arch/mips/mm/tlb-andes.c
+++ b/arch/mips/mm/tlb-andes.c
@@ -195,6 +195,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 {
 	unsigned long flags;
 	pgd_t *pgdp;
+	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep;
 	int idx, pid;
@@ -220,7 +221,8 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 	write_c0_entryhi(address | (pid));
 	pgdp = pgd_offset(vma->vm_mm, address);
 	tlb_probe();
-	pmdp = pmd_offset(pgdp, address);
+	pudp = pud_offset(pgdp, address);
+	pmdp = pmd_offset(pudp, address);
 	idx = read_c0_index();
 	ptep = pte_offset_map(pmdp, address);
 	write_c0_entrylo0(pte_val(*ptep++) >> 6);
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 59d38bc05b69..8297970f0bb1 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -21,6 +21,12 @@
 
 extern void build_tlb_refill_handler(void);
 
+/*
+ * Make sure all entries differ.  If they're not different
+ * MIPS32 will take revenge ...
+ */
+#define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1)))
+
 /* CP0 hazard avoidance. */
 #define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
 				     "nop; nop; nop; nop; nop; nop;\n\t" \
@@ -42,11 +48,8 @@ void local_flush_tlb_all(void)
 
 	/* Blast 'em all away. */
 	while (entry < current_cpu_data.tlbsize) {
-		/*
-		 * Make sure all entries differ.  If they're not different
-		 * MIPS32 will take revenge ...
-		 */
-		write_c0_entryhi(CKSEG0 + (entry << (PAGE_SHIFT + 1)));
+		/* Make sure all entries differ. */
+		write_c0_entryhi(UNIQUE_ENTRYHI(entry));
 		write_c0_index(entry);
 		mtc0_tlbw_hazard();
 		tlb_write_indexed();
@@ -57,12 +60,21 @@ void local_flush_tlb_all(void)
 	local_irq_restore(flags);
 }
 
+/* All entries common to a mm share an asid.  To effectively flush
+   these entries, we just bump the asid. */
 void local_flush_tlb_mm(struct mm_struct *mm)
 {
-	int cpu = smp_processor_id();
+	int cpu;
+
+	preempt_disable();
 
-	if (cpu_context(cpu, mm) != 0)
-		drop_mmu_context(mm,cpu);
+	cpu = smp_processor_id();
+
+	if (cpu_context(cpu, mm) != 0) {
+		drop_mmu_context(mm, cpu);
+	}
+
+	preempt_enable();
 }
 
 void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
@@ -75,9 +87,9 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 		unsigned long flags;
 		int size;
 
-		local_irq_save(flags);
 		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
 		size = (size + 1) >> 1;
+		local_irq_save(flags);
 		if (size <= current_cpu_data.tlbsize/2) {
 			int oldpid = read_c0_entryhi();
 			int newpid = cpu_asid(cpu, mm);
@@ -99,8 +111,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 				if (idx < 0)
 					continue;
 				/* Make sure all entries differ. */
-				write_c0_entryhi(CKSEG0 +
-				                 (idx << (PAGE_SHIFT + 1)));
+				write_c0_entryhi(UNIQUE_ENTRYHI(idx));
 				mtc0_tlbw_hazard();
 				tlb_write_indexed();
 			}
@@ -118,9 +129,9 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 	unsigned long flags;
 	int size;
 
-	local_irq_save(flags);
 	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
 	size = (size + 1) >> 1;
+	local_irq_save(flags);
 	if (size <= current_cpu_data.tlbsize / 2) {
 		int pid = read_c0_entryhi();
 
@@ -142,7 +153,7 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 			if (idx < 0)
 				continue;
 			/* Make sure all entries differ. */
-			write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT + 1)));
+			write_c0_entryhi(UNIQUE_ENTRYHI(idx));
 			mtc0_tlbw_hazard();
 			tlb_write_indexed();
 		}
@@ -176,7 +187,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
 		if (idx < 0)
 			goto finish;
 		/* Make sure all entries differ. */
-		write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT + 1)));
+		write_c0_entryhi(UNIQUE_ENTRYHI(idx));
 		mtc0_tlbw_hazard();
 		tlb_write_indexed();
 		tlbw_use_hazard();
@@ -197,8 +208,8 @@ void local_flush_tlb_one(unsigned long page)
 	int oldpid, idx;
 
 	local_irq_save(flags);
-	page &= (PAGE_MASK << 1);
 	oldpid = read_c0_entryhi();
+	page &= (PAGE_MASK << 1);
 	write_c0_entryhi(page);
 	mtc0_tlbw_hazard();
 	tlb_probe();
@@ -208,7 +219,7 @@ void local_flush_tlb_one(unsigned long page)
 	write_c0_entrylo1(0);
 	if (idx >= 0) {
 		/* Make sure all entries differ. */
-		write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT + 1)));
+		write_c0_entryhi(UNIQUE_ENTRYHI(idx));
 		mtc0_tlbw_hazard();
 		tlb_write_indexed();
 		tlbw_use_hazard();
@@ -227,6 +238,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 {
 	unsigned long flags;
 	pgd_t *pgdp;
+	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep;
 	int idx, pid;
@@ -237,35 +249,34 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 	if (current->active_mm != vma->vm_mm)
 		return;
 
-	pid = read_c0_entryhi() & ASID_MASK;
-
 	local_irq_save(flags);
+
+	pid = read_c0_entryhi() & ASID_MASK;
 	address &= (PAGE_MASK << 1);
 	write_c0_entryhi(address | pid);
 	pgdp = pgd_offset(vma->vm_mm, address);
 	mtc0_tlbw_hazard();
 	tlb_probe();
 	BARRIER;
-	pmdp = pmd_offset(pgdp, address);
+	pudp = pud_offset(pgdp, address);
+	pmdp = pmd_offset(pudp, address);
 	idx = read_c0_index();
 	ptep = pte_offset_map(pmdp, address);
 
- #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
- 	write_c0_entrylo0(ptep->pte_high);
- 	ptep++;
- 	write_c0_entrylo1(ptep->pte_high);
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
+	write_c0_entrylo0(ptep->pte_high);
+	ptep++;
+	write_c0_entrylo1(ptep->pte_high);
 #else
-  	write_c0_entrylo0(pte_val(*ptep++) >> 6);
-  	write_c0_entrylo1(pte_val(*ptep) >> 6);
+	write_c0_entrylo0(pte_val(*ptep++) >> 6);
+	write_c0_entrylo1(pte_val(*ptep) >> 6);
 #endif
-	write_c0_entryhi(address | pid);
 	mtc0_tlbw_hazard();
 	if (idx < 0)
 		tlb_write_random();
 	else
 		tlb_write_indexed();
 	tlbw_use_hazard();
-	write_c0_entryhi(pid);
 	local_irq_restore(flags);
 }
 
@@ -357,7 +368,8 @@ __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
 	old_pagemask = read_c0_pagemask();
 	wired = read_c0_wired();
 	if (--temp_tlb_entry < wired) {
-		printk(KERN_WARNING "No TLB space left for add_temporary_entry\n");
+		printk(KERN_WARNING
+		       "No TLB space left for add_temporary_entry\n");
 		ret = -ENOSPC;
 		goto out;
 	}
@@ -388,7 +400,7 @@ static void __init probe_tlb(unsigned long config)
 	 * is not supported, we assume R4k style.  Cpu probing already figured
 	 * out the number of tlb entries.
 	 */
-	if ((c->processor_id  & 0xff0000) == PRID_COMP_LEGACY)
+	if ((c->processor_id & 0xff0000) == PRID_COMP_LEGACY)
 		return;
 
 	reg = read_c0_config1();
diff --git a/arch/mips/mm/tlb-sb1.c b/arch/mips/mm/tlb-sb1.c
deleted file mode 100644
index 6256cafcf3a2..000000000000
--- a/arch/mips/mm/tlb-sb1.c
+++ /dev/null
@@ -1,376 +0,0 @@
-/*
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
- * Copyright (C) 1997, 2001 Ralf Baechle (ralf@gnu.org)
- * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-#include <linux/init.h>
-#include <asm/mmu_context.h>
-#include <asm/bootinfo.h>
-#include <asm/cpu.h>
-
-extern void build_tlb_refill_handler(void);
-
-#define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1)))
-
-/* Dump the current entry* and pagemask registers */
-static inline void dump_cur_tlb_regs(void)
-{
-	unsigned int entryhihi, entryhilo, entrylo0hi, entrylo0lo, entrylo1hi;
-	unsigned int entrylo1lo, pagemask;
-
-	__asm__ __volatile__ (
-		".set push             \n"
-		".set noreorder        \n"
-		".set mips64           \n"
-		".set noat             \n"
-		"     tlbr             \n"
-		"     dmfc0  $1, $10   \n"
-		"     dsrl32 %0, $1, 0 \n"
-		"     sll    %1, $1, 0 \n"
-		"     dmfc0  $1, $2    \n"
-		"     dsrl32 %2, $1, 0 \n"
-		"     sll    %3, $1, 0 \n"
-		"     dmfc0  $1, $3    \n"
-		"     dsrl32 %4, $1, 0 \n"
-		"     sll    %5, $1, 0 \n"
-		"     mfc0   %6, $5    \n"
-		".set pop              \n"
-		: "=r" (entryhihi), "=r" (entryhilo),
-		  "=r" (entrylo0hi), "=r" (entrylo0lo),
-		  "=r" (entrylo1hi), "=r" (entrylo1lo),
-		  "=r" (pagemask));
-
-	printk("%08X%08X %08X%08X %08X%08X %08X",
-	       entryhihi, entryhilo,
-	       entrylo0hi, entrylo0lo,
-	       entrylo1hi, entrylo1lo,
-	       pagemask);
-}
-
-void sb1_dump_tlb(void)
-{
-	unsigned long old_ctx;
-	unsigned long flags;
-	int entry;
-	local_irq_save(flags);
-	old_ctx = read_c0_entryhi();
-	printk("Current TLB registers state:\n"
-	       "      EntryHi       EntryLo0          EntryLo1     PageMask  Index\n"
-	       "--------------------------------------------------------------------\n");
-	dump_cur_tlb_regs();
-	printk(" %08X\n", read_c0_index());
-	printk("\n\nFull TLB Dump:\n"
-	       "Idx      EntryHi       EntryLo0          EntryLo1     PageMask\n"
-	       "--------------------------------------------------------------\n");
-	for (entry = 0; entry < current_cpu_data.tlbsize; entry++) {
-		write_c0_index(entry);
-		printk("\n%02i ", entry);
-		dump_cur_tlb_regs();
-	}
-	printk("\n");
-	write_c0_entryhi(old_ctx);
-	local_irq_restore(flags);
-}
-
-void local_flush_tlb_all(void)
-{
-	unsigned long flags;
-	unsigned long old_ctx;
-	int entry;
-
-	local_irq_save(flags);
-	/* Save old context and create impossible VPN2 value */
-	old_ctx = read_c0_entryhi() & ASID_MASK;
-	write_c0_entrylo0(0);
-	write_c0_entrylo1(0);
-
-	entry = read_c0_wired();
-	while (entry < current_cpu_data.tlbsize) {
-		write_c0_entryhi(UNIQUE_ENTRYHI(entry));
-		write_c0_index(entry);
-		tlb_write_indexed();
-		entry++;
-	}
-	write_c0_entryhi(old_ctx);
-	local_irq_restore(flags);
-}
-
-
-/*
- * Use a bogus region of memory (starting at 0) to sanitize the TLB's.
- * Use increments of the maximum page size (16MB), and check for duplicate
- * entries before doing a given write.  Then, when we're safe from collisions
- * with the firmware, go back and give all the entries invalid addresses with
- * the normal flush routine.  Wired entries will be killed as well!
- */
-static void __init sb1_sanitize_tlb(void)
-{
-	int entry;
-	long addr = 0;
-
-	long inc = 1<<24;  /* 16MB */
-	/* Save old context and create impossible VPN2 value */
-	write_c0_entrylo0(0);
-	write_c0_entrylo1(0);
-	for (entry = 0; entry < current_cpu_data.tlbsize; entry++) {
-		do {
-			addr += inc;
-			write_c0_entryhi(addr);
-			tlb_probe();
-		} while ((int)(read_c0_index()) >= 0);
-		write_c0_index(entry);
-		tlb_write_indexed();
-	}
-	/* Now that we know we're safe from collisions, we can safely flush
-	   the TLB with the "normal" routine. */
-	local_flush_tlb_all();
-}
-
-void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
-	unsigned long end)
-{
-	struct mm_struct *mm = vma->vm_mm;
-	unsigned long flags;
-	int cpu;
-
-	local_irq_save(flags);
-	cpu = smp_processor_id();
-	if (cpu_context(cpu, mm) != 0) {
-		int size;
-		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
-		size = (size + 1) >> 1;
-		if (size <= (current_cpu_data.tlbsize/2)) {
-			int oldpid = read_c0_entryhi() & ASID_MASK;
-			int newpid = cpu_asid(cpu, mm);
-
-			start &= (PAGE_MASK << 1);
-			end += ((PAGE_SIZE << 1) - 1);
-			end &= (PAGE_MASK << 1);
-			while (start < end) {
-				int idx;
-
-				write_c0_entryhi(start | newpid);
-				start += (PAGE_SIZE << 1);
-				tlb_probe();
-				idx = read_c0_index();
-				write_c0_entrylo0(0);
-				write_c0_entrylo1(0);
-				write_c0_entryhi(UNIQUE_ENTRYHI(idx));
-				if (idx < 0)
-					continue;
-				tlb_write_indexed();
-			}
-			write_c0_entryhi(oldpid);
-		} else {
-			drop_mmu_context(mm, cpu);
-		}
-	}
-	local_irq_restore(flags);
-}
-
-void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
-	unsigned long flags;
-	int size;
-
-	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
-	size = (size + 1) >> 1;
-
-	local_irq_save(flags);
-	if (size <= (current_cpu_data.tlbsize/2)) {
-		int pid = read_c0_entryhi();
-
-		start &= (PAGE_MASK << 1);
-		end += ((PAGE_SIZE << 1) - 1);
-		end &= (PAGE_MASK << 1);
-
-		while (start < end) {
-			int idx;
-
-			write_c0_entryhi(start);
-			start += (PAGE_SIZE << 1);
-			tlb_probe();
-			idx = read_c0_index();
-			write_c0_entrylo0(0);
-			write_c0_entrylo1(0);
-			write_c0_entryhi(UNIQUE_ENTRYHI(idx));
-			if (idx < 0)
-				continue;
-			tlb_write_indexed();
-		}
-		write_c0_entryhi(pid);
-	} else {
-		local_flush_tlb_all();
-	}
-	local_irq_restore(flags);
-}
-
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
-	unsigned long flags;
-	int cpu = smp_processor_id();
-
-	local_irq_save(flags);
-	if (cpu_context(cpu, vma->vm_mm) != 0) {
-		int oldpid, newpid, idx;
-		newpid = cpu_asid(cpu, vma->vm_mm);
-		page &= (PAGE_MASK << 1);
-		oldpid = read_c0_entryhi() & ASID_MASK;
-		write_c0_entryhi(page | newpid);
-		tlb_probe();
-		idx = read_c0_index();
-		write_c0_entrylo0(0);
-		write_c0_entrylo1(0);
-		if (idx < 0)
-			goto finish;
-		/* Make sure all entries differ. */
-		write_c0_entryhi(UNIQUE_ENTRYHI(idx));
-		tlb_write_indexed();
-	finish:
-		write_c0_entryhi(oldpid);
-	}
-	local_irq_restore(flags);
-}
-
-/*
- * Remove one kernel space TLB entry.  This entry is assumed to be marked
- * global so we don't do the ASID thing.
- */
-void local_flush_tlb_one(unsigned long page)
-{
-	unsigned long flags;
-	int oldpid, idx;
-
-	page &= (PAGE_MASK << 1);
-	oldpid = read_c0_entryhi() & ASID_MASK;
-
-	local_irq_save(flags);
-	write_c0_entryhi(page);
-	tlb_probe();
-	idx = read_c0_index();
-	if (idx >= 0) {
-		/* Make sure all entries differ. */
-		write_c0_entryhi(UNIQUE_ENTRYHI(idx));
-		write_c0_entrylo0(0);
-		write_c0_entrylo1(0);
-		tlb_write_indexed();
-	}
-
-	write_c0_entryhi(oldpid);
-	local_irq_restore(flags);
-}
-
-/* All entries common to a mm share an asid.  To effectively flush
-   these entries, we just bump the asid. */
-void local_flush_tlb_mm(struct mm_struct *mm)
-{
-	int cpu;
-
-	preempt_disable();
-
-	cpu = smp_processor_id();
-
-	if (cpu_context(cpu, mm) != 0) {
-		drop_mmu_context(mm, cpu);
-	}
-
-	preempt_enable();
-}
-
-/* Stolen from mips32 routines */
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
-	unsigned long flags;
-	pgd_t *pgdp;
-	pmd_t *pmdp;
-	pte_t *ptep;
-	int idx, pid;
-
-	/*
-	 * Handle debugger faulting in for debugee.
-	 */
-	if (current->active_mm != vma->vm_mm)
-		return;
-
-	local_irq_save(flags);
-
-	pid = read_c0_entryhi() & ASID_MASK;
-	address &= (PAGE_MASK << 1);
-	write_c0_entryhi(address | (pid));
-	pgdp = pgd_offset(vma->vm_mm, address);
-	tlb_probe();
-	pmdp = pmd_offset(pgdp, address);
-	idx = read_c0_index();
-	ptep = pte_offset_map(pmdp, address);
-	write_c0_entrylo0(pte_val(*ptep++) >> 6);
-	write_c0_entrylo1(pte_val(*ptep) >> 6);
-	if (idx < 0) {
-		tlb_write_random();
-	} else {
-		tlb_write_indexed();
-	}
-	local_irq_restore(flags);
-}
-
-void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
-	unsigned long entryhi, unsigned long pagemask)
-{
-	unsigned long flags;
-	unsigned long wired;
-	unsigned long old_pagemask;
-	unsigned long old_ctx;
-
-	local_irq_save(flags);
-	old_ctx = read_c0_entryhi() & 0xff;
-	old_pagemask = read_c0_pagemask();
-	wired = read_c0_wired();
-	write_c0_wired(wired + 1);
-	write_c0_index(wired);
-
-	write_c0_pagemask(pagemask);
-	write_c0_entryhi(entryhi);
-	write_c0_entrylo0(entrylo0);
-	write_c0_entrylo1(entrylo1);
-	tlb_write_indexed();
-
-	write_c0_entryhi(old_ctx);
-	write_c0_pagemask(old_pagemask);
-
-	local_flush_tlb_all();
-	local_irq_restore(flags);
-}
-
-/*
- * This is called from loadmmu.c.  We have to set up all the
- * memory management function pointers, as well as initialize
- * the caches and tlbs
- */
-void tlb_init(void)
-{
-	write_c0_pagemask(PM_DEFAULT_MASK);
-	write_c0_wired(0);
-
-	/*
-	 * We don't know what state the firmware left the TLB's in, so this is
-	 * the ultra-conservative way to flush the TLB's and avoid machine
-	 * check exceptions due to duplicate TLB entries
-	 */
-	sb1_sanitize_tlb();
-
-	build_tlb_refill_handler();
-}
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 6569be3983c7..0f9485806bac 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -6,6 +6,7 @@
  * Synthesize TLB refill handlers at runtime.
  *
  * Copyright (C) 2004,2005 by Thiemo Seufer
+ * Copyright (C) 2005  Maciej W. Rozycki
  */
 
 #include <stdarg.h>
@@ -91,7 +92,7 @@ enum opcode {
 	insn_addu, insn_addiu, insn_and, insn_andi, insn_beq,
 	insn_beql, insn_bgez, insn_bgezl, insn_bltz, insn_bltzl,
 	insn_bne, insn_daddu, insn_daddiu, insn_dmfc0, insn_dmtc0,
-	insn_dsll, insn_dsll32, insn_dsra, insn_dsrl, insn_dsrl32,
+	insn_dsll, insn_dsll32, insn_dsra, insn_dsrl,
 	insn_dsubu, insn_eret, insn_j, insn_jal, insn_jr, insn_ld,
 	insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0, insn_mtc0,
 	insn_ori, insn_rfe, insn_sc, insn_scd, insn_sd, insn_sll,
@@ -134,7 +135,6 @@ static __initdata struct insn insn_table[] = {
 	{ insn_dsll32, M(spec_op,0,0,0,0,dsll32_op), RT | RD | RE },
 	{ insn_dsra, M(spec_op,0,0,0,0,dsra_op), RT | RD | RE },
 	{ insn_dsrl, M(spec_op,0,0,0,0,dsrl_op), RT | RD | RE },
-	{ insn_dsrl32, M(spec_op,0,0,0,0,dsrl32_op), RT | RD | RE },
 	{ insn_dsubu, M(spec_op,0,0,0,0,dsubu_op), RS | RT | RD },
 	{ insn_eret, M(cop0_op,cop_op,0,0,0,eret_op), 0 },
 	{ insn_j, M(j_op,0,0,0,0,0), JIMM },
@@ -366,7 +366,6 @@ I_u2u1u3(_dsll);
 I_u2u1u3(_dsll32);
 I_u2u1u3(_dsra);
 I_u2u1u3(_dsrl);
-I_u2u1u3(_dsrl32);
 I_u3u1u2(_dsubu);
 I_0(_eret);
 I_u1(_j);
@@ -412,7 +411,6 @@ enum label_id {
 	label_nopage_tlbm,
 	label_smp_pgtable_change,
 	label_r3000_write_probe_fail,
-	label_r3000_write_probe_ok
 };
 
 struct label {
@@ -445,7 +443,6 @@ L_LA(_nopage_tlbs)
 L_LA(_nopage_tlbm)
 L_LA(_smp_pgtable_change)
 L_LA(_r3000_write_probe_fail)
-L_LA(_r3000_write_probe_ok)
 
 /* convenience macros for instructions */
 #ifdef CONFIG_64BIT
@@ -490,7 +487,7 @@ L_LA(_r3000_write_probe_ok)
 static __init int __attribute__((unused)) in_compat_space_p(long addr)
 {
 	/* Is this address in 32bit compat space? */
-	return (((addr) & 0xffffffff00000000) == 0xffffffff00000000);
+	return (((addr) & 0xffffffff00000000L) == 0xffffffff00000000L);
 }
 
 static __init int __attribute__((unused)) rel_highest(long val)
@@ -734,7 +731,7 @@ static void __init build_r3000_tlb_refill_handler(void)
 	if (p > tlb_handler + 32)
 		panic("TLB refill handler space exceeded");
 
-	printk("Synthesized TLB handler (%u instructions).\n",
+	printk("Synthesized TLB refill handler (%u instructions).\n",
 	       (unsigned int)(p - tlb_handler));
 #ifdef DEBUG_TLB
 	{
@@ -746,7 +743,6 @@ static void __init build_r3000_tlb_refill_handler(void)
 #endif
 
 	memcpy((void *)CAC_BASE, tlb_handler, 0x80);
-	flush_icache_range(CAC_BASE, CAC_BASE + 0x80);
 }
 
 /*
@@ -783,6 +779,8 @@ static __initdata u32 final_handler[64];
 static __init void __attribute__((unused)) build_tlb_probe_entry(u32 **p)
 {
 	switch (current_cpu_data.cputype) {
+	/* Found by experiment: R4600 v2.0 needs this, too.  */
+	case CPU_R4600:
 	case CPU_R5000:
 	case CPU_R5000A:
 	case CPU_NEVADA:
@@ -834,12 +832,20 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
 	case CPU_R4700:
 	case CPU_R5000:
 	case CPU_R5000A:
+		i_nop(p);
+		tlbw(p);
+		i_nop(p);
+		break;
+
+	case CPU_R4300:
 	case CPU_5KC:
 	case CPU_TX49XX:
 	case CPU_AU1000:
 	case CPU_AU1100:
 	case CPU_AU1500:
 	case CPU_AU1550:
+	case CPU_AU1200:
+	case CPU_PR4450:
 		i_nop(p);
 		tlbw(p);
 		break;
@@ -848,6 +854,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
 	case CPU_R12000:
 	case CPU_4KC:
 	case CPU_SB1:
+	case CPU_SB1A:
 	case CPU_4KSC:
 	case CPU_20KC:
 	case CPU_25KF:
@@ -875,6 +882,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
 
 	case CPU_4KEC:
 	case CPU_24K:
+	case CPU_34K:
 		i_ehb(p);
 		tlbw(p);
 		break;
@@ -911,6 +919,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
 
 	case CPU_VR4131:
 	case CPU_VR4133:
+	case CPU_R5432:
 		i_nop(p);
 		i_nop(p);
 		tlbw(p);
@@ -942,34 +951,29 @@ build_get_pmde64(u32 **p, struct label **l, struct reloc **r,
 	/* No i_nop needed here, since the next insn doesn't touch TMP. */
 
 #ifdef CONFIG_SMP
+# ifdef CONFIG_BUILD_ELF64
 	/*
-	 * 64 bit SMP has the lower part of &pgd_current[smp_processor_id()]
+	 * 64 bit SMP running in XKPHYS has smp_processor_id() << 3
 	 * stored in CONTEXT.
 	 */
-	if (in_compat_space_p(pgdc)) {
-		i_dmfc0(p, ptr, C0_CONTEXT);
-		i_dsra(p, ptr, ptr, 23);
-		i_ld(p, ptr, 0, ptr);
-	} else {
-#ifdef CONFIG_BUILD_ELF64
-		i_dmfc0(p, ptr, C0_CONTEXT);
-		i_dsrl(p, ptr, ptr, 23);
-		i_dsll(p, ptr, ptr, 3);
-		i_LA_mostly(p, tmp, pgdc);
-		i_daddu(p, ptr, ptr, tmp);
-		i_dmfc0(p, tmp, C0_BADVADDR);
-		i_ld(p, ptr, rel_lo(pgdc), ptr);
-#else
-		i_dmfc0(p, ptr, C0_CONTEXT);
-		i_lui(p, tmp, rel_highest(pgdc));
-		i_dsll(p, ptr, ptr, 9);
-		i_daddiu(p, tmp, tmp, rel_higher(pgdc));
-		i_dsrl32(p, ptr, ptr, 0);
-		i_and(p, ptr, ptr, tmp);
-		i_dmfc0(p, tmp, C0_BADVADDR);
-		i_ld(p, ptr, 0, ptr);
-#endif
-	}
+	i_dmfc0(p, ptr, C0_CONTEXT);
+	i_dsrl(p, ptr, ptr, 23);
+	i_LA_mostly(p, tmp, pgdc);
+	i_daddu(p, ptr, ptr, tmp);
+	i_dmfc0(p, tmp, C0_BADVADDR);
+	i_ld(p, ptr, rel_lo(pgdc), ptr);
+# else
+	/*
+	 * 64 bit SMP running in compat space has the lower part of
+	 * &pgd_current[smp_processor_id()] stored in CONTEXT.
+	 */
+	if (!in_compat_space_p(pgdc))
+		panic("Invalid page directory address!");
+
+	i_dmfc0(p, ptr, C0_CONTEXT);
+	i_dsra(p, ptr, ptr, 23);
+	i_ld(p, ptr, 0, ptr);
+# endif
 #else
 	i_LA_mostly(p, ptr, pgdc);
 	i_ld(p, ptr, rel_lo(pgdc), ptr);
@@ -1026,7 +1030,6 @@ build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr)
 	i_mfc0(p, ptr, C0_CONTEXT);
 	i_LA_mostly(p, tmp, pgdc);
 	i_srl(p, ptr, ptr, 23);
-	i_sll(p, ptr, ptr, 2);
 	i_addu(p, ptr, tmp, ptr);
 #else
 	i_LA_mostly(p, ptr, pgdc);
@@ -1245,13 +1248,19 @@ static void __init build_r4000_tlb_refill_handler(void)
 	{
 		int i;
 
-		for (i = 0; i < 64; i++)
-			printk("%08x\n", final_handler[i]);
+		f = final_handler;
+#ifdef CONFIG_64BIT
+		if (final_len > 32)
+			final_len = 64;
+		else
+			f = final_handler + 32;
+#endif /* CONFIG_64BIT */
+		for (i = 0; i < final_len; i++)
+			printk("%08x\n", f[i]);
 	}
 #endif
 
 	memcpy((void *)CAC_BASE, final_handler, 0x100);
-	flush_icache_range(CAC_BASE, CAC_BASE + 0x100);
 }
 
 /*
@@ -1277,37 +1286,41 @@ u32 __tlb_handler_align handle_tlbs[FASTPATH_SIZE];
 u32 __tlb_handler_align handle_tlbm[FASTPATH_SIZE];
 
 static void __init
-iPTE_LW(u32 **p, struct label **l, unsigned int pte, int offset,
-	unsigned int ptr)
+iPTE_LW(u32 **p, struct label **l, unsigned int pte, unsigned int ptr)
 {
 #ifdef CONFIG_SMP
 # ifdef CONFIG_64BIT_PHYS_ADDR
 	if (cpu_has_64bits)
-		i_lld(p, pte, offset, ptr);
+		i_lld(p, pte, 0, ptr);
 	else
 # endif
-		i_LL(p, pte, offset, ptr);
+		i_LL(p, pte, 0, ptr);
 #else
 # ifdef CONFIG_64BIT_PHYS_ADDR
 	if (cpu_has_64bits)
-		i_ld(p, pte, offset, ptr);
+		i_ld(p, pte, 0, ptr);
 	else
 # endif
-		i_LW(p, pte, offset, ptr);
+		i_LW(p, pte, 0, ptr);
 #endif
 }
 
 static void __init
-iPTE_SW(u32 **p, struct reloc **r, unsigned int pte, int offset,
-	unsigned int ptr)
+iPTE_SW(u32 **p, struct reloc **r, unsigned int pte, unsigned int ptr,
+	unsigned int mode)
 {
+#ifdef CONFIG_64BIT_PHYS_ADDR
+	unsigned int hwmode = mode & (_PAGE_VALID | _PAGE_DIRTY);
+#endif
+
+	i_ori(p, pte, pte, mode);
 #ifdef CONFIG_SMP
 # ifdef CONFIG_64BIT_PHYS_ADDR
 	if (cpu_has_64bits)
-		i_scd(p, pte, offset, ptr);
+		i_scd(p, pte, 0, ptr);
 	else
 # endif
-		i_SC(p, pte, offset, ptr);
+		i_SC(p, pte, 0, ptr);
 
 	if (r10000_llsc_war())
 		il_beqzl(p, r, pte, label_smp_pgtable_change);
@@ -1318,7 +1331,7 @@ iPTE_SW(u32 **p, struct reloc **r, unsigned int pte, int offset,
 	if (!cpu_has_64bits) {
 		/* no i_nop needed */
 		i_ll(p, pte, sizeof(pte_t) / 2, ptr);
-		i_ori(p, pte, pte, _PAGE_VALID);
+		i_ori(p, pte, pte, hwmode);
 		i_sc(p, pte, sizeof(pte_t) / 2, ptr);
 		il_beqz(p, r, pte, label_smp_pgtable_change);
 		/* no i_nop needed */
@@ -1331,15 +1344,15 @@ iPTE_SW(u32 **p, struct reloc **r, unsigned int pte, int offset,
 #else
 # ifdef CONFIG_64BIT_PHYS_ADDR
 	if (cpu_has_64bits)
-		i_sd(p, pte, offset, ptr);
+		i_sd(p, pte, 0, ptr);
 	else
 # endif
-		i_SW(p, pte, offset, ptr);
+		i_SW(p, pte, 0, ptr);
 
 # ifdef CONFIG_64BIT_PHYS_ADDR
 	if (!cpu_has_64bits) {
 		i_lw(p, pte, sizeof(pte_t) / 2, ptr);
-		i_ori(p, pte, pte, _PAGE_VALID);
+		i_ori(p, pte, pte, hwmode);
 		i_sw(p, pte, sizeof(pte_t) / 2, ptr);
 		i_lw(p, pte, 0, ptr);
 	}
@@ -1359,7 +1372,7 @@ build_pte_present(u32 **p, struct label **l, struct reloc **r,
 	i_andi(p, pte, pte, _PAGE_PRESENT | _PAGE_READ);
 	i_xori(p, pte, pte, _PAGE_PRESENT | _PAGE_READ);
 	il_bnez(p, r, pte, lid);
-	iPTE_LW(p, l, pte, 0, ptr);
+	iPTE_LW(p, l, pte, ptr);
 }
 
 /* Make PTE valid, store result in PTR. */
@@ -1367,8 +1380,9 @@ static void __init
 build_make_valid(u32 **p, struct reloc **r, unsigned int pte,
 		 unsigned int ptr)
 {
-	i_ori(p, pte, pte, _PAGE_VALID | _PAGE_ACCESSED);
-	iPTE_SW(p, r, pte, 0, ptr);
+	unsigned int mode = _PAGE_VALID | _PAGE_ACCESSED;
+
+	iPTE_SW(p, r, pte, ptr, mode);
 }
 
 /*
@@ -1382,7 +1396,7 @@ build_pte_writable(u32 **p, struct label **l, struct reloc **r,
 	i_andi(p, pte, pte, _PAGE_PRESENT | _PAGE_WRITE);
 	i_xori(p, pte, pte, _PAGE_PRESENT | _PAGE_WRITE);
 	il_bnez(p, r, pte, lid);
-	iPTE_LW(p, l, pte, 0, ptr);
+	iPTE_LW(p, l, pte, ptr);
 }
 
 /* Make PTE writable, update software status bits as well, then store
@@ -1392,9 +1406,10 @@ static void __init
 build_make_write(u32 **p, struct reloc **r, unsigned int pte,
 		 unsigned int ptr)
 {
-	i_ori(p, pte, pte,
-	      _PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_VALID | _PAGE_DIRTY);
-	iPTE_SW(p, r, pte, 0, ptr);
+	unsigned int mode = (_PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_VALID
+			     | _PAGE_DIRTY);
+
+	iPTE_SW(p, r, pte, ptr, mode);
 }
 
 /*
@@ -1407,41 +1422,48 @@ build_pte_modifiable(u32 **p, struct label **l, struct reloc **r,
 {
 	i_andi(p, pte, pte, _PAGE_WRITE);
 	il_beqz(p, r, pte, lid);
-	iPTE_LW(p, l, pte, 0, ptr);
+	iPTE_LW(p, l, pte, ptr);
 }
 
 /*
  * R3000 style TLB load/store/modify handlers.
  */
 
-/* This places the pte in the page table at PTR into ENTRYLO0. */
+/*
+ * This places the pte into ENTRYLO0 and writes it with tlbwi.
+ * Then it returns.
+ */
 static void __init
-build_r3000_pte_reload(u32 **p, unsigned int ptr)
+build_r3000_pte_reload_tlbwi(u32 **p, unsigned int pte, unsigned int tmp)
 {
-	i_lw(p, ptr, 0, ptr);
-	i_nop(p); /* load delay */
-	i_mtc0(p, ptr, C0_ENTRYLO0);
-	i_nop(p); /* cp0 delay */
+	i_mtc0(p, pte, C0_ENTRYLO0); /* cp0 delay */
+	i_mfc0(p, tmp, C0_EPC); /* cp0 delay */
+	i_tlbwi(p);
+	i_jr(p, tmp);
+	i_rfe(p); /* branch delay */
 }
 
 /*
- * The index register may have the probe fail bit set,
- * because we would trap on access kseg2, i.e. without refill.
+ * This places the pte into ENTRYLO0 and writes it with tlbwi
+ * or tlbwr as appropriate.  This is because the index register
+ * may have the probe fail bit set as a result of a trap on a
+ * kseg2 access, i.e. without refill.  Then it returns.
  */
 static void __init
-build_r3000_tlb_write(u32 **p, struct label **l, struct reloc **r,
-		      unsigned int tmp)
+build_r3000_tlb_reload_write(u32 **p, struct label **l, struct reloc **r,
+			     unsigned int pte, unsigned int tmp)
 {
 	i_mfc0(p, tmp, C0_INDEX);
-	i_nop(p); /* cp0 delay */
-	il_bltz(p, r, tmp, label_r3000_write_probe_fail);
-	i_nop(p); /* branch delay */
-	i_tlbwi(p);
-	il_b(p, r, label_r3000_write_probe_ok);
-	i_nop(p); /* branch delay */
+	i_mtc0(p, pte, C0_ENTRYLO0); /* cp0 delay */
+	il_bltz(p, r, tmp, label_r3000_write_probe_fail); /* cp0 delay */
+	i_mfc0(p, tmp, C0_EPC); /* branch delay */
+	i_tlbwi(p); /* cp0 delay */
+	i_jr(p, tmp);
+	i_rfe(p); /* branch delay */
 	l_r3000_write_probe_fail(l, *p);
-	i_tlbwr(p);
-	l_r3000_write_probe_ok(l, *p);
+	i_tlbwr(p); /* cp0 delay */
+	i_jr(p, tmp);
+	i_rfe(p); /* branch delay */
 }
 
 static void __init
@@ -1461,17 +1483,7 @@ build_r3000_tlbchange_handler_head(u32 **p, unsigned int pte,
 	i_andi(p, pte, pte, 0xffc); /* load delay */
 	i_addu(p, ptr, ptr, pte);
 	i_lw(p, pte, 0, ptr);
-	i_nop(p); /* load delay */
-	i_tlbp(p);
-}
-
-static void __init
-build_r3000_tlbchange_handler_tail(u32 **p, unsigned int tmp)
-{
-	i_mfc0(p, tmp, C0_EPC);
-	i_nop(p); /* cp0 delay */
-	i_jr(p, tmp);
-	i_rfe(p); /* branch delay */
+	i_tlbp(p); /* load delay */
 }
 
 static void __init build_r3000_tlb_load_handler(void)
@@ -1486,10 +1498,9 @@ static void __init build_r3000_tlb_load_handler(void)
 
 	build_r3000_tlbchange_handler_head(&p, K0, K1);
 	build_pte_present(&p, &l, &r, K0, K1, label_nopage_tlbl);
+	i_nop(&p); /* load delay */
 	build_make_valid(&p, &r, K0, K1);
-	build_r3000_pte_reload(&p, K1);
-	build_r3000_tlb_write(&p, &l, &r, K0);
-	build_r3000_tlbchange_handler_tail(&p, K0);
+	build_r3000_tlb_reload_write(&p, &l, &r, K0, K1);
 
 	l_nopage_tlbl(&l, p);
 	i_j(&p, (unsigned long)tlb_do_page_fault_0 & 0x0fffffff);
@@ -1506,13 +1517,10 @@ static void __init build_r3000_tlb_load_handler(void)
 	{
 		int i;
 
-		for (i = 0; i < FASTPATH_SIZE; i++)
+		for (i = 0; i < (p - handle_tlbl); i++)
 			printk("%08x\n", handle_tlbl[i]);
 	}
 #endif
-
-	flush_icache_range((unsigned long)handle_tlbl,
-			   (unsigned long)handle_tlbl + FASTPATH_SIZE * sizeof(u32));
 }
 
 static void __init build_r3000_tlb_store_handler(void)
@@ -1527,10 +1535,9 @@ static void __init build_r3000_tlb_store_handler(void)
 
 	build_r3000_tlbchange_handler_head(&p, K0, K1);
 	build_pte_writable(&p, &l, &r, K0, K1, label_nopage_tlbs);
+	i_nop(&p); /* load delay */
 	build_make_write(&p, &r, K0, K1);
-	build_r3000_pte_reload(&p, K1);
-	build_r3000_tlb_write(&p, &l, &r, K0);
-	build_r3000_tlbchange_handler_tail(&p, K0);
+	build_r3000_tlb_reload_write(&p, &l, &r, K0, K1);
 
 	l_nopage_tlbs(&l, p);
 	i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff);
@@ -1547,13 +1554,10 @@ static void __init build_r3000_tlb_store_handler(void)
 	{
 		int i;
 
-		for (i = 0; i < FASTPATH_SIZE; i++)
+		for (i = 0; i < (p - handle_tlbs); i++)
 			printk("%08x\n", handle_tlbs[i]);
 	}
 #endif
-
-	flush_icache_range((unsigned long)handle_tlbs,
-			   (unsigned long)handle_tlbs + FASTPATH_SIZE * sizeof(u32));
 }
 
 static void __init build_r3000_tlb_modify_handler(void)
@@ -1568,10 +1572,9 @@ static void __init build_r3000_tlb_modify_handler(void)
 
 	build_r3000_tlbchange_handler_head(&p, K0, K1);
 	build_pte_modifiable(&p, &l, &r, K0, K1, label_nopage_tlbm);
+	i_nop(&p); /* load delay */
 	build_make_write(&p, &r, K0, K1);
-	build_r3000_pte_reload(&p, K1);
-	i_tlbwi(&p);
-	build_r3000_tlbchange_handler_tail(&p, K0);
+	build_r3000_pte_reload_tlbwi(&p, K0, K1);
 
 	l_nopage_tlbm(&l, p);
 	i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff);
@@ -1588,13 +1591,10 @@ static void __init build_r3000_tlb_modify_handler(void)
 	{
 		int i;
 
-		for (i = 0; i < FASTPATH_SIZE; i++)
+		for (i = 0; i < (p - handle_tlbm); i++)
 			printk("%08x\n", handle_tlbm[i]);
 	}
 #endif
-
-	flush_icache_range((unsigned long)handle_tlbm,
-			   (unsigned long)handle_tlbm + FASTPATH_SIZE * sizeof(u32));
 }
 
 /*
@@ -1620,7 +1620,7 @@ build_r4000_tlbchange_handler_head(u32 **p, struct label **l,
 #ifdef CONFIG_SMP
 	l_smp_pgtable_change(l, *p);
 # endif
-	iPTE_LW(p, l, pte, 0, ptr); /* get even pte */
+	iPTE_LW(p, l, pte, ptr); /* get even pte */
 	build_tlb_probe_entry(p);
 }
 
@@ -1680,13 +1680,10 @@ static void __init build_r4000_tlb_load_handler(void)
 	{
 		int i;
 
-		for (i = 0; i < FASTPATH_SIZE; i++)
+		for (i = 0; i < (p - handle_tlbl); i++)
 			printk("%08x\n", handle_tlbl[i]);
 	}
 #endif
-
-	flush_icache_range((unsigned long)handle_tlbl,
-			   (unsigned long)handle_tlbl + FASTPATH_SIZE * sizeof(u32));
 }
 
 static void __init build_r4000_tlb_store_handler(void)
@@ -1719,13 +1716,10 @@ static void __init build_r4000_tlb_store_handler(void)
 	{
 		int i;
 
-		for (i = 0; i < FASTPATH_SIZE; i++)
+		for (i = 0; i < (p - handle_tlbs); i++)
 			printk("%08x\n", handle_tlbs[i]);
 	}
 #endif
-
-	flush_icache_range((unsigned long)handle_tlbs,
-			   (unsigned long)handle_tlbs + FASTPATH_SIZE * sizeof(u32));
 }
 
 static void __init build_r4000_tlb_modify_handler(void)
@@ -1759,13 +1753,10 @@ static void __init build_r4000_tlb_modify_handler(void)
 	{
 		int i;
 
-		for (i = 0; i < FASTPATH_SIZE; i++)
+		for (i = 0; i < (p - handle_tlbm); i++)
 			printk("%08x\n", handle_tlbm[i]);
 	}
 #endif
-
-	flush_icache_range((unsigned long)handle_tlbm,
-			   (unsigned long)handle_tlbm + FASTPATH_SIZE * sizeof(u32));
 }
 
 void __init build_tlb_refill_handler(void)
@@ -1813,3 +1804,13 @@ void __init build_tlb_refill_handler(void)
 		}
 	}
 }
+
+void __init flush_tlb_handlers(void)
+{
+	flush_icache_range((unsigned long)handle_tlbl,
+			   (unsigned long)handle_tlbl + sizeof(handle_tlbl));
+	flush_icache_range((unsigned long)handle_tlbs,
+			   (unsigned long)handle_tlbs + sizeof(handle_tlbs));
+	flush_icache_range((unsigned long)handle_tlbm,
+			   (unsigned long)handle_tlbm + sizeof(handle_tlbm));
+}
diff --git a/arch/mips/momentum/Kconfig b/arch/mips/momentum/Kconfig
new file mode 100644
index 000000000000..70a61cf7174d
--- /dev/null
+++ b/arch/mips/momentum/Kconfig
@@ -0,0 +1,6 @@
+config JAGUAR_DMALOW
+	bool "Low DMA Mode"
+	depends on MOMENCO_JAGUAR_ATX
+	help
+	  Select to Y if jump JP5 is set on your board, N otherwise.  Normally
+	  the jumper is set, so if you feel unsafe, just say Y.
diff --git a/arch/mips/momentum/jaguar_atx/prom.c b/arch/mips/momentum/jaguar_atx/prom.c
index 14ae2e713585..aae7a802767a 100644
--- a/arch/mips/momentum/jaguar_atx/prom.c
+++ b/arch/mips/momentum/jaguar_atx/prom.c
@@ -236,8 +236,9 @@ void __init prom_init(void)
 #endif
 }
 
-void __init prom_free_prom_memory(void)
+unsigned long __init prom_free_prom_memory(void)
 {
+	return 0;
 }
 
 void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c
index 90288cf2b1e0..768bf4406452 100644
--- a/arch/mips/momentum/jaguar_atx/setup.c
+++ b/arch/mips/momentum/jaguar_atx/setup.c
@@ -351,7 +351,7 @@ static __init int __init ja_pci_init(void)
 
 arch_initcall(ja_pci_init);
 
-static int  __init momenco_jaguar_atx_setup(void)
+void __init plat_setup(void)
 {
 	unsigned int tmpword;
 
@@ -467,8 +467,4 @@ static int  __init momenco_jaguar_atx_setup(void)
 
 	}
 #endif
-
-	return 0;
 }
-
-early_initcall(momenco_jaguar_atx_setup);
diff --git a/arch/mips/momentum/ocelot_3/prom.c b/arch/mips/momentum/ocelot_3/prom.c
index c4fa9c525faa..9803daa2a792 100644
--- a/arch/mips/momentum/ocelot_3/prom.c
+++ b/arch/mips/momentum/ocelot_3/prom.c
@@ -239,8 +239,9 @@ void __init prom_init(void)
 #endif
 }
 
-void __init prom_free_prom_memory(void)
+unsigned long __init prom_free_prom_memory(void)
 {
+	return 0;
 }
 
 void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c
index ce2efcbab7aa..a7803e08f9db 100644
--- a/arch/mips/momentum/ocelot_3/setup.c
+++ b/arch/mips/momentum/ocelot_3/setup.c
@@ -307,7 +307,7 @@ static __init int __init ja_pci_init(void)
 
 arch_initcall(ja_pci_init);
 
-static int __init momenco_ocelot_3_setup(void)
+void __init plat_setup(void)
 {
 	unsigned int tmpword;
 
@@ -391,8 +391,4 @@ static int __init momenco_ocelot_3_setup(void)
 
 	/* Support for 128 MB memory */
 	add_memory_region(0x0, 0x08000000, BOOT_MEM_RAM);
-
-	return 0;
 }
-
-early_initcall(momenco_ocelot_3_setup);
diff --git a/arch/mips/momentum/ocelot_c/cpci-irq.c b/arch/mips/momentum/ocelot_c/cpci-irq.c
index dea48b3ad687..bd885785e2f9 100644
--- a/arch/mips/momentum/ocelot_c/cpci-irq.c
+++ b/arch/mips/momentum/ocelot_c/cpci-irq.c
@@ -129,14 +129,13 @@ void ll_cpci_irq(struct pt_regs *regs)
 #define shutdown_cpci_irq	disable_cpci_irq
 
 struct hw_interrupt_type cpci_irq_type = {
-	"CPCI/FPGA",
-	startup_cpci_irq,
-	shutdown_cpci_irq,
-	enable_cpci_irq,
-	disable_cpci_irq,
-	mask_and_ack_cpci_irq,
-	end_cpci_irq,
-	NULL
+	.typename = "CPCI/FPGA",
+	.startup = startup_cpci_irq,
+	.shutdown = shutdown_cpci_irq,
+	.enable = enable_cpci_irq,
+	.disable = disable_cpci_irq,
+	.ack = mask_and_ack_cpci_irq,
+	.end = end_cpci_irq,
 };
 
 void cpci_irq_init(void)
diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c
index 844ddd06349b..ce70fc96f160 100644
--- a/arch/mips/momentum/ocelot_c/setup.c
+++ b/arch/mips/momentum/ocelot_c/setup.c
@@ -222,7 +222,7 @@ void momenco_time_init(void)
 	rtc_set_time = m48t37y_set_time;
 }
 
-static void __init momenco_ocelot_c_setup(void)
+void __init plat_setup(void)
 {
 	unsigned int tmpword;
 
@@ -340,8 +340,6 @@ static void __init momenco_ocelot_c_setup(void)
 	}
 }
 
-early_initcall(momenco_ocelot_c_setup);
-
 #ifndef CONFIG_64BIT
 /* This needs to be one of the first initcalls, because no I/O port access
    can work before this */
diff --git a/arch/mips/momentum/ocelot_c/uart-irq.c b/arch/mips/momentum/ocelot_c/uart-irq.c
index ebe1507b17df..755bde5146be 100644
--- a/arch/mips/momentum/ocelot_c/uart-irq.c
+++ b/arch/mips/momentum/ocelot_c/uart-irq.c
@@ -122,14 +122,13 @@ void ll_uart_irq(struct pt_regs *regs)
 #define shutdown_uart_irq	disable_uart_irq
 
 struct hw_interrupt_type uart_irq_type = {
-	"UART/FPGA",
-	startup_uart_irq,
-	shutdown_uart_irq,
-	enable_uart_irq,
-	disable_uart_irq,
-	mask_and_ack_uart_irq,
-	end_uart_irq,
-	NULL
+	.typename = "UART/FPGA",
+	.startup = startup_uart_irq,
+	.shutdown = shutdown_uart_irq,
+	.enable = enable_uart_irq,
+	.disable = disable_uart_irq,
+	.ack = mask_and_ack_uart_irq,
+	.end = end_uart_irq,
 };
 
 void uart_irq_init(void)
diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c
index 38a78ab8c830..6336751391c3 100644
--- a/arch/mips/momentum/ocelot_g/setup.c
+++ b/arch/mips/momentum/ocelot_g/setup.c
@@ -160,7 +160,7 @@ static void __init setup_l3cache(unsigned long size)
 	printk("Done\n");
 }
 
-static int  __init momenco_ocelot_g_setup(void)
+void __init plat_setup(void)
 {
 	void (*l3func)(unsigned long) = (void *) KSEG1ADDR(setup_l3cache);
 	unsigned int tmpword;
@@ -240,12 +240,8 @@ static int  __init momenco_ocelot_g_setup(void)
 
 	/* FIXME: Fix up the DiskOnChip mapping */
 	MV_WRITE(0x468, 0xfef73);
-
-	return 0;
 }
 
-early_initcall(momenco_ocelot_g_setup);
-
 /* This needs to be one of the first initcalls, because no I/O port access
    can work before this */
 
diff --git a/arch/mips/oprofile/Kconfig b/arch/mips/oprofile/Kconfig
index 19d37730b664..55feaf798596 100644
--- a/arch/mips/oprofile/Kconfig
+++ b/arch/mips/oprofile/Kconfig
@@ -11,7 +11,7 @@ config PROFILING
 
 config OPROFILE
 	tristate "OProfile system profiling (EXPERIMENTAL)"
-	depends on PROFILING
+	depends on PROFILING && EXPERIMENTAL
 	help
 	  OProfile is a profiling system capable of profiling the
 	  whole system, include the kernel, kernel modules, libraries,
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index ab65ce3d471a..dd2cc42f1b6d 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -3,7 +3,8 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2004 by Ralf Baechle
+ * Copyright (C) 2004, 2005 Ralf Baechle
+ * Copyright (C) 2005 MIPS Technologies, Inc.
  */
 #include <linux/errno.h>
 #include <linux/init.h>
@@ -45,10 +46,10 @@ static int op_mips_create_files(struct super_block * sb, struct dentry * root)
 		oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
 		oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
 		oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
-		/* Dummies.  */
 		oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
 		oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
 		oprofilefs_create_ulong(sb, dir, "exl", &ctr[i].exl);
+		/* Dummy.  */
 		oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
 	}
 
@@ -68,9 +69,10 @@ static void op_mips_stop(void)
 	on_each_cpu(model->cpu_stop, NULL, 0, 1);
 }
 
-void __init oprofile_arch_init(struct oprofile_operations *ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
 	struct op_mips_model *lmodel = NULL;
+	int res;
 
 	switch (current_cpu_data.cputype) {
 	case CPU_24K:
@@ -83,21 +85,25 @@ void __init oprofile_arch_init(struct oprofile_operations *ops)
 	};
 
 	if (!lmodel)
-		return;
+		return -ENODEV;
 
-	if (lmodel->init())
-		return;
+	res = lmodel->init();
+	if (res)
+		return res;
 
 	model = lmodel;
 
-	ops->create_files = op_mips_create_files;
-	ops->setup = op_mips_setup;
-	ops->start = op_mips_start;
-	ops->stop = op_mips_stop;
-	ops->cpu_type = lmodel->cpu_type;
+	ops->create_files	= op_mips_create_files;
+	ops->setup		= op_mips_setup;
+	//ops->shutdown         = op_mips_shutdown;
+	ops->start		= op_mips_start;
+	ops->stop		= op_mips_stop;
+	ops->cpu_type		= lmodel->cpu_type;
 
 	printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
 	       lmodel->cpu_type);
+
+	return 0;
 }
 
 void oprofile_arch_exit(void)
diff --git a/arch/mips/oprofile/op_impl.h b/arch/mips/oprofile/op_impl.h
index 9f5cdff041be..f0121557047d 100644
--- a/arch/mips/oprofile/op_impl.h
+++ b/arch/mips/oprofile/op_impl.h
@@ -10,6 +10,11 @@
 #ifndef OP_IMPL_H
 #define OP_IMPL_H 1
 
+struct pt_regs;
+
+extern void null_perf_irq(struct pt_regs *regs);
+extern void (*perf_irq)(struct pt_regs *regs);
+
 /* Per-counter configuration as set via oprofilefs.  */
 struct op_counter_config {
 	unsigned long enabled;
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
new file mode 100644
index 000000000000..d36b64dfcb2f
--- /dev/null
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -0,0 +1,215 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004, 2005 by Ralf Baechle
+ * Copyright (C) 2005 by MIPS Technologies, Inc.
+ */
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include "op_impl.h"
+
+#define M_PERFCTL_EXL			(1UL    <<  0)
+#define M_PERFCTL_KERNEL		(1UL    <<  1)
+#define M_PERFCTL_SUPERVISOR		(1UL    <<  2)
+#define M_PERFCTL_USER			(1UL    <<  3)
+#define M_PERFCTL_INTERRUPT_ENABLE	(1UL    <<  4)
+#define M_PERFCTL_EVENT(event)		((event) << 5)
+#define M_PERFCTL_WIDE			(1UL    << 30)
+#define M_PERFCTL_MORE			(1UL    << 31)
+
+#define M_COUNTER_OVERFLOW		(1UL    << 31)
+
+struct op_mips_model op_model_mipsxx;
+
+static struct mipsxx_register_config {
+	unsigned int control[4];
+	unsigned int counter[4];
+} reg;
+
+/* Compute all of the registers in preparation for enabling profiling.  */
+
+static void mipsxx_reg_setup(struct op_counter_config *ctr)
+{
+	unsigned int counters = op_model_mipsxx.num_counters;
+	int i;
+
+	/* Compute the performance counter control word.  */
+	/* For now count kernel and user mode */
+	for (i = 0; i < counters; i++) {
+		reg.control[i] = 0;
+		reg.counter[i] = 0;
+
+		if (!ctr[i].enabled)
+			continue;
+
+		reg.control[i] = M_PERFCTL_EVENT(ctr[i].event) |
+		                 M_PERFCTL_INTERRUPT_ENABLE;
+		if (ctr[i].kernel)
+			reg.control[i] |= M_PERFCTL_KERNEL;
+		if (ctr[i].user)
+			reg.control[i] |= M_PERFCTL_USER;
+		if (ctr[i].exl)
+			reg.control[i] |= M_PERFCTL_EXL;
+		reg.counter[i] = 0x80000000 - ctr[i].count;
+	}
+}
+
+/* Program all of the registers in preparation for enabling profiling.  */
+
+static void mipsxx_cpu_setup (void *args)
+{
+	unsigned int counters = op_model_mipsxx.num_counters;
+
+	switch (counters) {
+	case 4:
+		write_c0_perfctrl3(0);
+		write_c0_perfcntr3(reg.counter[3]);
+	case 3:
+		write_c0_perfctrl2(0);
+		write_c0_perfcntr2(reg.counter[2]);
+	case 2:
+		write_c0_perfctrl1(0);
+		write_c0_perfcntr1(reg.counter[1]);
+	case 1:
+		write_c0_perfctrl0(0);
+		write_c0_perfcntr0(reg.counter[0]);
+	}
+}
+
+/* Start all counters on current CPU */
+static void mipsxx_cpu_start(void *args)
+{
+	unsigned int counters = op_model_mipsxx.num_counters;
+
+	switch (counters) {
+	case 4:
+		write_c0_perfctrl3(reg.control[3]);
+	case 3:
+		write_c0_perfctrl2(reg.control[2]);
+	case 2:
+		write_c0_perfctrl1(reg.control[1]);
+	case 1:
+		write_c0_perfctrl0(reg.control[0]);
+	}
+}
+
+/* Stop all counters on current CPU */
+static void mipsxx_cpu_stop(void *args)
+{
+	unsigned int counters = op_model_mipsxx.num_counters;
+
+	switch (counters) {
+	case 4:
+		write_c0_perfctrl3(0);
+	case 3:
+		write_c0_perfctrl2(0);
+	case 2:
+		write_c0_perfctrl1(0);
+	case 1:
+		write_c0_perfctrl0(0);
+	}
+}
+
+static void mipsxx_perfcount_handler(struct pt_regs *regs)
+{
+	unsigned int counters = op_model_mipsxx.num_counters;
+	unsigned int control;
+	unsigned int counter;
+
+	switch (counters) {
+#define HANDLE_COUNTER(n)						\
+	case n + 1:							\
+		control = read_c0_perfctrl ## n();			\
+		counter = read_c0_perfcntr ## n();			\
+		if ((control & M_PERFCTL_INTERRUPT_ENABLE) &&		\
+		    (counter & M_COUNTER_OVERFLOW)) {			\
+			oprofile_add_sample(regs, n);			\
+			write_c0_perfcntr ## n(reg.counter[n]);		\
+		}
+	HANDLE_COUNTER(3)
+	HANDLE_COUNTER(2)
+	HANDLE_COUNTER(1)
+	HANDLE_COUNTER(0)
+	}
+}
+
+#define M_CONFIG1_PC	(1 << 4)
+
+static inline int n_counters(void)
+{
+	if (!(read_c0_config1() & M_CONFIG1_PC))
+		return 0;
+	if (!(read_c0_perfctrl0() & M_PERFCTL_MORE))
+		return 1;
+	if (!(read_c0_perfctrl1() & M_PERFCTL_MORE))
+		return 2;
+	if (!(read_c0_perfctrl2() & M_PERFCTL_MORE))
+		return 3;
+
+	return 4;
+}
+
+static inline void reset_counters(int counters)
+{
+	switch (counters) {
+	case 4:
+		write_c0_perfctrl3(0);
+		write_c0_perfcntr3(0);
+	case 3:
+		write_c0_perfctrl2(0);
+		write_c0_perfcntr2(0);
+	case 2:
+		write_c0_perfctrl1(0);
+		write_c0_perfcntr1(0);
+	case 1:
+		write_c0_perfctrl0(0);
+		write_c0_perfcntr0(0);
+	}
+}
+
+static int __init mipsxx_init(void)
+{
+	int counters;
+
+	counters = n_counters();
+	if (counters == 0)
+		return -ENODEV;
+
+	reset_counters(counters);
+
+	op_model_mipsxx.num_counters = counters;
+	switch (current_cpu_data.cputype) {
+	case CPU_24K:
+		op_model_mipsxx.cpu_type = "mips/24K";
+		break;
+
+	default:
+		printk(KERN_ERR "Profiling unsupported for this CPU\n");
+
+		return -ENODEV;
+	}
+
+	perf_irq = mipsxx_perfcount_handler;
+
+	return 0;
+}
+
+static void mipsxx_exit(void)
+{
+	reset_counters(op_model_mipsxx.num_counters);
+
+	perf_irq = null_perf_irq;
+}
+
+struct op_mips_model op_model_mipsxx = {
+	.reg_setup	= mipsxx_reg_setup,
+	.cpu_setup	= mipsxx_cpu_setup,
+	.init		= mipsxx_init,
+	.exit		= mipsxx_exit,
+	.cpu_start	= mipsxx_cpu_start,
+	.cpu_stop	= mipsxx_cpu_stop,
+};
diff --git a/arch/mips/oprofile/op_model_rm9000.c b/arch/mips/oprofile/op_model_rm9000.c
index bee47793cb1a..9b75e41c78ef 100644
--- a/arch/mips/oprofile/op_model_rm9000.c
+++ b/arch/mips/oprofile/op_model_rm9000.c
@@ -5,6 +5,7 @@
  *
  * Copyright (C) 2004 by Ralf Baechle
  */
+#include <linux/init.h>
 #include <linux/oprofile.h>
 #include <linux/interrupt.h>
 #include <linux/smp.h>
@@ -114,7 +115,7 @@ static irqreturn_t rm9000_perfcount_handler(int irq, void * dev_id,
 	return IRQ_HANDLED;
 }
 
-static int rm9000_init(void)
+static int __init rm9000_init(void)
 {
 	return request_irq(rm9000_perfcount_irq, rm9000_perfcount_handler,
 	                   0, "Perfcounter", NULL);
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 83d81c9cdc2b..7b7468304022 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_MIPS_ITE8172)	+= fixup-ite8172g.o
 obj-$(CONFIG_MIPS_IVR)		+= fixup-ivr.o
 obj-$(CONFIG_SOC_AU1500)	+= fixup-au1000.o ops-au1000.o
 obj-$(CONFIG_SOC_AU1550)	+= fixup-au1000.o ops-au1000.o
+obj-$(CONFIG_SOC_PNX8550)	+= fixup-pnx8550.o ops-pnx8550.o
 obj-$(CONFIG_MIPS_MALTA)	+= fixup-malta.o
 obj-$(CONFIG_MOMENCO_JAGUAR_ATX)+= fixup-jaguar.o
 obj-$(CONFIG_MOMENCO_OCELOT)	+= fixup-ocelot.o pci-ocelot.o
@@ -45,11 +46,13 @@ obj-$(CONFIG_PMC_YOSEMITE)	+= fixup-yosemite.o ops-titan.o ops-titan-ht.o \
 obj-$(CONFIG_SGI_IP27)		+= pci-ip27.o
 obj-$(CONFIG_SGI_IP32)		+= fixup-ip32.o ops-mace.o pci-ip32.o
 obj-$(CONFIG_SIBYTE_SB1250)	+= fixup-sb1250.o pci-sb1250.o
+obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1480.o pci-bcm1480ht.o
 obj-$(CONFIG_SNI_RM200_PCI)	+= fixup-sni.o ops-sni.o
 obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
 obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
 obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
 obj-$(CONFIG_TOSHIBA_JMR3927)	+= fixup-jmr3927.o pci-jmr3927.o
 obj-$(CONFIG_TOSHIBA_RBTX4927)	+= fixup-rbtx4927.o ops-tx4927.o
+obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-tx4938.o ops-tx4938.o
 obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
 obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
diff --git a/arch/mips/pci/fixup-atlas.c b/arch/mips/pci/fixup-atlas.c
index 2406835833d6..87920b245931 100644
--- a/arch/mips/pci/fixup-atlas.c
+++ b/arch/mips/pci/fixup-atlas.c
@@ -1,14 +1,37 @@
+/*
+ * Copyright (C) 2003, 2004  Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2005  MIPS Technologies, Inc.  All rights reserved.
+ *	Author:	 Maciej W. Rozycki <macro@mips.com>
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
 #include <linux/config.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+
 #include <asm/mips-boards/atlasint.h>
 
-#define INTD		ATLASINT_INTD
-#define INTC		ATLASINT_INTC
-#define INTB		ATLASINT_INTB
+#define PCIA		ATLASINT_PCIA
+#define PCIB		ATLASINT_PCIB
+#define PCIC		ATLASINT_PCIC
+#define PCID		ATLASINT_PCID
 #define INTA		ATLASINT_INTA
-#define SCSI		ATLASINT_SCSI
+#define INTB		ATLASINT_INTB
 #define ETH		ATLASINT_ETH
+#define INTC		ATLASINT_INTC
+#define SCSI		ATLASINT_SCSI
+#define INTD		ATLASINT_INTD
 
 static char irq_tab[][5] __initdata = {
 	/*      INTA    INTB    INTC    INTD */
@@ -27,13 +50,13 @@ static char irq_tab[][5] __initdata = {
 	{0,	0,	0,	0,	0 },	/* 12: Unused */
 	{0,	0,	0,	0,	0 },	/* 13: Unused */
 	{0,	0,	0,	0,	0 },	/* 14: Unused */
-	{0,	0,	0,	0,	0 },	/* 15: Unused */
+	{0,	PCIA,	PCIB,	PCIC,	PCID },	/* 15: cPCI (behind 21150) */
 	{0,	SCSI,	0,	0,	0 },	/* 16: SYM53C810A SCSI */
 	{0,	0,	0,	0,	0 },	/* 17: Core */
-	{0,	INTA,	INTB,	INTC,	INTD },	/* 18: PCI Slot 1 */
-	{0,	ETH,	0,	0,	0 },	/* 19: SAA9730 Ethernet */
-	{0,	0,	0,	0,	0 },	/* 20: PCI Slot 3 */
-	{0,	0,	0,	0,	0 }	/* 21: PCI Slot 4 */
+	{0,	INTA,	INTB,	INTC,	INTD },	/* 18: PCI Slot */
+	{0,	ETH,	0,	0,	0 },	/* 19: SAA9730 Eth. et al. */
+	{0,	0,	0,	0,	0 },	/* 20: Unused */
+	{0,	0,	0,	0,	0 }	/* 21: Unused */
 };
 
 int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c
index 39fe2b16fcec..c2f8304fe55b 100644
--- a/arch/mips/pci/fixup-au1000.c
+++ b/arch/mips/pci/fixup-au1000.c
@@ -26,7 +26,6 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
@@ -34,82 +33,7 @@
 
 #include <asm/mach-au1x00/au1000.h>
 
-/*
- * Shortcut
- */
-#ifdef CONFIG_SOC_AU1500
-#define INTA AU1000_PCI_INTA
-#define INTB AU1000_PCI_INTB
-#define INTC AU1000_PCI_INTC
-#define INTD AU1000_PCI_INTD
-#endif
-
-#ifdef CONFIG_SOC_AU1550
-#define INTA AU1550_PCI_INTA
-#define INTB AU1550_PCI_INTB
-#define INTC AU1550_PCI_INTC
-#define INTD AU1550_PCI_INTD
-#endif
-
-#define INTX    0xFF /* not valid */
-
-#ifdef CONFIG_MIPS_DB1500
-static char irq_tab_alchemy[][5] __initdata = {
- [12] =	{ -1, INTA, INTX, INTX, INTX},   /* IDSEL 12 - HPT371   */
- [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_BOSPORUS
-static char irq_tab_alchemy[][5] __initdata = {
- [11] =	{ -1, INTA, INTB, INTX, INTX},   /* IDSEL 11 - miniPCI  */
- [12] =	{ -1, INTA, INTX, INTX, INTX},   /* IDSEL 12 - SN1741   */
- [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_MIRAGE
-static char irq_tab_alchemy[][5] __initdata = {
- [11] =	{ -1, INTD, INTX, INTX, INTX},   /* IDSEL 11 - SMI VGX */
- [12] =	{ -1, INTX, INTX, INTC, INTX},   /* IDSEL 12 - PNX1300 */
- [13] =	{ -1, INTA, INTB, INTX, INTX},   /* IDSEL 13 - miniPCI */
-};
-#endif
-
-#ifdef CONFIG_MIPS_DB1550
-static char irq_tab_alchemy[][5] __initdata = {
- [11] =	{ -1, INTC, INTX, INTX, INTX},   /* IDSEL 11 - on-board HPT371    */
- [12] =	{ -1, INTB, INTC, INTD, INTA},   /* IDSEL 12 - PCI slot 2 (left)  */
- [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot 1 (right) */
-};
-#endif
-
-#ifdef CONFIG_MIPS_PB1500
-static char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX},   /* IDSEL 12 - HPT370   */
- [13] = { -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_PB1550
-static char irq_tab_alchemy[][5] __initdata = {
- [12] =	{ -1, INTB, INTC, INTD, INTA},   /* IDSEL 12 - PCI slot 2 (left)  */
- [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot 1 (right) */
-};
-#endif
-
-#ifdef CONFIG_MIPS_MTX1
-static char irq_tab_alchemy[][5] __initdata = {
- [0] = { -1, INTA, INTB, INTX, INTX},   /* IDSEL 00 - AdapterA-Slot0 (top)    */
- [1] = { -1, INTB, INTA, INTX, INTX},   /* IDSEL 01 - AdapterA-Slot1 (bottom) */
- [2] = { -1, INTC, INTD, INTX, INTX},   /* IDSEL 02 - AdapterB-Slot0 (top)    */
- [3] = { -1, INTD, INTC, INTX, INTX},   /* IDSEL 03 - AdapterB-Slot1 (bottom) */
- [4] = { -1, INTA, INTB, INTX, INTX},   /* IDSEL 04 - AdapterC-Slot0 (top)    */
- [5] = { -1, INTB, INTA, INTX, INTX},   /* IDSEL 05 - AdapterC-Slot1 (bottom) */
- [6] = { -1, INTC, INTD, INTX, INTX},   /* IDSEL 06 - AdapterD-Slot0 (top)    */
- [7] = { -1, INTD, INTC, INTX, INTX},   /* IDSEL 07 - AdapterD-Slot1 (bottom) */
-};
-#endif
+extern char irq_tab_alchemy[][5];
 
 int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c
index 57e1ca2116bb..909292f50d06 100644
--- a/arch/mips/pci/fixup-cobalt.c
+++ b/arch/mips/pci/fixup-cobalt.c
@@ -21,6 +21,20 @@
 
 extern int cobalt_board_id;
 
+static void qube_raq_galileo_early_fixup(struct pci_dev *dev)
+{
+	if (dev->devfn == PCI_DEVFN(0, 0) &&
+		(dev->class >> 8) == PCI_CLASS_MEMORY_OTHER) {
+
+		dev->class = (PCI_CLASS_BRIDGE_HOST << 8) | (dev->class & 0xff);
+
+		printk(KERN_INFO "Galileo: fixed bridge class\n");
+	}
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
+	 qube_raq_galileo_early_fixup);
+
 static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev)
 {
 	unsigned short cfgword;
@@ -48,6 +62,9 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev)
 {
 	unsigned short galileo_id;
 
+	if (dev->devfn != PCI_DEVFN(0, 0))
+		return;
+
 	/* Fix PCI latency-timer and cache-line-size values in Galileo
 	 * host bridge.
 	 */
@@ -55,6 +72,13 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev)
 	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 7);
 
 	/*
+	 * The code described by the comment below has been removed
+	 * as it causes bus mastering by the Ethernet controllers
+	 * to break under any kind of network load. We always set
+	 * the retry timeouts to their maximum.
+	 *
+	 * --x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--
+	 *
 	 * On all machines prior to Q2, we had the STOP line disconnected
 	 * from Galileo to VIA on PCI.  The new Galileo does not function
 	 * correctly unless we have it connected.
@@ -64,21 +88,43 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev)
 	 */
 	pci_read_config_word(dev, PCI_REVISION_ID, &galileo_id);
 	galileo_id &= 0xff;	/* mask off class info */
+
+ 	printk(KERN_INFO "Galileo: revision %u\n", galileo_id);
+
+#if 0
 	if (galileo_id >= 0x10) {
 		/* New Galileo, assumes PCI stop line to VIA is connected. */
 		GALILEO_OUTL(0x4020, GT_PCI0_TOR_OFS);
-	} else if (galileo_id == 0x1 || galileo_id == 0x2) {
+	} else if (galileo_id == 0x1 || galileo_id == 0x2)
+#endif
+	{
 		signed int timeo;
 		/* XXX WE MUST DO THIS ELSE GALILEO LOCKS UP! -DaveM */
 		timeo = GALILEO_INL(GT_PCI0_TOR_OFS);
 		/* Old Galileo, assumes PCI STOP line to VIA is disconnected. */
-		GALILEO_OUTL(0xffff, GT_PCI0_TOR_OFS);
+		GALILEO_OUTL(
+			(0xff << 16) |		/* retry count */
+			(0xff << 8) |		/* timeout 1   */
+			0xff,			/* timeout 0   */
+			GT_PCI0_TOR_OFS);
+
+		/* enable PCI retry exceeded interrupt */
+		GALILEO_OUTL(GALILEO_INTR_RETRY_CTR | GALILEO_INL(GT_INTRMASK_OFS), GT_INTRMASK_OFS);
 	}
 }
 
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_GALILEO, PCI_ANY_ID,
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
 	 qube_raq_galileo_fixup);
 
+static char irq_tab_qube1[] __initdata = {
+  [COBALT_PCICONF_CPU]     = 0,
+  [COBALT_PCICONF_ETH0]    = COBALT_QUBE1_ETH0_IRQ,
+  [COBALT_PCICONF_RAQSCSI] = COBALT_SCSI_IRQ,
+  [COBALT_PCICONF_VIA]     = 0,
+  [COBALT_PCICONF_PCISLOT] = COBALT_QUBE_SLOT_IRQ,
+  [COBALT_PCICONF_ETH1]    = 0
+};
+
 static char irq_tab_cobalt[] __initdata = {
   [COBALT_PCICONF_CPU]     = 0,
   [COBALT_PCICONF_ETH0]    = COBALT_ETH0_IRQ,
@@ -99,6 +145,9 @@ static char irq_tab_raq2[] __initdata = {
 
 int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
+	if (cobalt_board_id < COBALT_BRD_ID_QUBE2)
+		return irq_tab_qube1[slot];
+
 	if (cobalt_board_id == COBALT_BRD_ID_RAQ2)
 		return irq_tab_raq2[slot];
 
diff --git a/arch/mips/pci/fixup-pnx8550.c b/arch/mips/pci/fixup-pnx8550.c
new file mode 100644
index 000000000000..4256b3b30b77
--- /dev/null
+++ b/arch/mips/pci/fixup-pnx8550.c
@@ -0,0 +1,57 @@
+/*
+ *  Philips PNX8550 pci fixups.
+ *
+ *  Copyright 2005 Embedded Alley Solutions, Inc
+ *  source@embeddealley.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach-pnx8550/pci.h>
+#include <asm/mach-pnx8550/int.h>
+
+
+#undef	DEBUG
+#ifdef 	DEBUG
+#define	DBG(x...)	printk(x)
+#else
+#define	DBG(x...)
+#endif
+
+extern char irq_tab_jbs[][5];
+
+void __init pcibios_fixup_resources(struct pci_dev *dev)
+{
+	/* no need to fixup IO resources */
+}
+
+void __init pcibios_fixup(void)
+{
+	/* nothing to do here */
+}
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return irq_tab_jbs[slot][pin];
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
diff --git a/arch/mips/pci/fixup-tx4938.c b/arch/mips/pci/fixup-tx4938.c
new file mode 100644
index 000000000000..f455520ada88
--- /dev/null
+++ b/arch/mips/pci/fixup-tx4938.c
@@ -0,0 +1,92 @@
+/*
+ * Toshiba rbtx4938 pci routines
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/tx4938/rbtx4938.h>
+
+extern struct pci_controller tx4938_pci_controller[];
+
+int pci_get_irq(struct pci_dev *dev, int pin)
+{
+	int irq = pin;
+	u8 slot = PCI_SLOT(dev->devfn);
+	struct pci_controller *controller = (struct pci_controller *)dev->sysdata;
+
+	if (controller == &tx4938_pci_controller[1]) {
+		/* TX4938 PCIC1 */
+		switch (slot) {
+		case TX4938_PCIC_IDSEL_AD_TO_SLOT(31):
+			if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH0_SEL)
+				return RBTX4938_IRQ_IRC + TX4938_IR_ETH0;
+			break;
+		case TX4938_PCIC_IDSEL_AD_TO_SLOT(30):
+			if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH1_SEL)
+				return RBTX4938_IRQ_IRC + TX4938_IR_ETH1;
+			break;
+		}
+		return 0;
+	}
+
+	/* IRQ rotation */
+	irq--;	/* 0-3 */
+	if (dev->bus->parent == NULL &&
+	    (slot == TX4938_PCIC_IDSEL_AD_TO_SLOT(23))) {
+		/* PCI CardSlot (IDSEL=A23) */
+		/* PCIA => PCIA (IDSEL=A23) */
+		irq = (irq + 0 + slot) % 4;
+	} else {
+		/* PCI Backplane */
+		irq = (irq + 33 - slot) % 4;
+	}
+	irq++;	/* 1-4 */
+
+	switch (irq) {
+	case 1:
+		irq = RBTX4938_IRQ_IOC_PCIA;
+		break;
+	case 2:
+		irq = RBTX4938_IRQ_IOC_PCIB;
+		break;
+	case 3:
+		irq = RBTX4938_IRQ_IOC_PCIC;
+		break;
+	case 4:
+		irq = RBTX4938_IRQ_IOC_PCID;
+		break;
+	}
+	return irq;
+}
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	unsigned char irq = 0;
+
+	irq = pci_get_irq(dev, pin);
+
+	printk(KERN_INFO "PCI: 0x%02x:0x%02x(0x%02x,0x%02x) IRQ=%d\n",
+	       dev->bus->number, dev->devfn, PCI_SLOT(dev->devfn),
+	       PCI_FUNC(dev->devfn), irq);
+
+	return irq;
+}
+
+/*
+ * Do platform specific device initialization at pci_enable_device() time
+ */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c
index c1c91ca0f9c2..be1420126c42 100644
--- a/arch/mips/pci/ops-au1000.c
+++ b/arch/mips/pci/ops-au1000.c
@@ -50,11 +50,6 @@
 
 int (*board_pci_idsel)(unsigned int devsel, int assert);
 
-/* CP0 hazard avoidance. */
-#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
-				     "nop; nop; nop; nop;\t" \
-				     ".set reorder\n\t")
-
 void mod_wired_entry(int entry, unsigned long entrylo0,
 		unsigned long entrylo1, unsigned long entryhi,
 		unsigned long pagemask)
@@ -66,16 +61,12 @@ void mod_wired_entry(int entry, unsigned long entrylo0,
 	old_ctx = read_c0_entryhi() & 0xff;
 	old_pagemask = read_c0_pagemask();
 	write_c0_index(entry);
-	BARRIER;
 	write_c0_pagemask(pagemask);
 	write_c0_entryhi(entryhi);
 	write_c0_entrylo0(entrylo0);
 	write_c0_entrylo1(entrylo1);
-	BARRIER;
 	tlb_write_indexed();
-	BARRIER;
 	write_c0_entryhi(old_ctx);
-	BARRIER;
 	write_c0_pagemask(old_pagemask);
 }
 
@@ -128,9 +119,8 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
 		last_entryLo0  = last_entryLo1 = 0xffffffff;
 	}
 
-	/* Since the Au1xxx doesn't do the idsel timing exactly to spec,
-	 * many board vendors implement their own off-chip idsel, so call
-	 * it now.  If it doesn't succeed, may as well bail out at this point.
+	/* Allow board vendors to implement their own off-chip idsel.
+	 * If it doesn't succeed, may as well bail out at this point.
 	 */
 	if (board_pci_idsel) {
 		if (board_pci_idsel(device, 1) == 0) {
diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c
index 4b4e086a7eb1..dc35270b65a2 100644
--- a/arch/mips/pci/ops-bonito64.c
+++ b/arch/mips/pci/ops-bonito64.c
@@ -1,6 +1,8 @@
 /*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 1999, 2000, 2004  MIPS Technologies, Inc.
+ *	All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
  *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
@@ -17,7 +19,6 @@
  *
  * MIPS boards specific PCI support.
  */
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
@@ -57,13 +58,6 @@ static int bonito64_pcibios_config_access(unsigned char access_type,
 		return -1;
 	}
 
-#ifdef CONFIG_MIPS_BOARDS_GEN
-	if ((busnum == 0) && (PCI_SLOT(devfn) == 17)) {
-		/* MIPS Core boards have Bonito connected as device 17 */
-		return -1;
-	}
-#endif
-
 	/* Clear cause register bits */
 	BONITO_PCICMD |= (BONITO_PCICMD_MABORT_CLR |
 			  BONITO_PCICMD_MTABORT_CLR);
diff --git a/arch/mips/pci/ops-gt64111.c b/arch/mips/pci/ops-gt64111.c
index c5b0fc184c2a..c1807934768d 100644
--- a/arch/mips/pci/ops-gt64111.c
+++ b/arch/mips/pci/ops-gt64111.c
@@ -18,15 +18,15 @@
 #include <asm/cobalt/cobalt.h>
 
 /*
- * Accessing device 31 hangs the GT64120.  Not sure if this will also hang
- * the GT64111, let's be paranoid for now.
+ * Device 31 on the GT64111 is used to generate PCI special
+ * cycles, so we shouldn't expected to find a device there ...
  */
 static inline int pci_range_ck(struct pci_bus *bus, unsigned int devfn)
 {
-	if (bus->number == 0 && devfn == PCI_DEVFN(31, 0))
-		return -1;
+	if (bus->number == 0 && PCI_SLOT(devfn) < 31)
+		return 0;
 
-	return 0;
+	return -1;
 }
 
 static int gt64111_pci_read_config(struct pci_bus *bus, unsigned int devfn,
diff --git a/arch/mips/pci/ops-gt64120.c b/arch/mips/pci/ops-gt64120.c
index 7b99dfa33dfc..6335844d607a 100644
--- a/arch/mips/pci/ops-gt64120.c
+++ b/arch/mips/pci/ops-gt64120.c
@@ -1,6 +1,8 @@
 /*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 1999, 2000, 2004  MIPS Technologies, Inc.
+ *	All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
  *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
@@ -43,10 +45,6 @@ static int gt64120_pcibios_config_access(unsigned char access_type,
 	unsigned char busnum = bus->number;
 	u32 intr;
 
-	if ((busnum == 0) && (PCI_SLOT(devfn) == 0))
-		/* Galileo itself is devfn 0, don't move it around */
-		return -1;
-
 	if ((busnum == 0) && (devfn >= PCI_DEVFN(31, 0)))
 		return -1;	/* Because of a bug in the galileo (for slot 31). */
 
diff --git a/arch/mips/pci/ops-msc.c b/arch/mips/pci/ops-msc.c
index 7bc099643a9d..5d9fbb0f4670 100644
--- a/arch/mips/pci/ops-msc.c
+++ b/arch/mips/pci/ops-msc.c
@@ -21,7 +21,6 @@
  * MIPS boards specific PCI support.
  *
  */
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
@@ -49,34 +48,17 @@ static int msc_pcibios_config_access(unsigned char access_type,
 	struct pci_bus *bus, unsigned int devfn, int where, u32 * data)
 {
 	unsigned char busnum = bus->number;
-	unsigned char type;
 	u32 intr;
 
-#ifdef CONFIG_MIPS_BOARDS_GEN
-	if ((busnum == 0) && (PCI_SLOT(devfn) == 17)) {
-		/* MIPS Core boards have SOCit connected as device 17 */
-		return -1;
-	}
-#endif
-
 	/* Clear status register bits. */
 	MSC_WRITE(MSC01_PCI_INTSTAT,
 		  (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT));
 
-	/* Setup address */
-	if (busnum == 0)
-		type = 0;	/* Type 0 */
-	else
-		type = 1;	/* Type 1 */
-
 	MSC_WRITE(MSC01_PCI_CFGADDR,
 		  ((busnum << MSC01_PCI_CFGADDR_BNUM_SHF) |
-		   (PCI_SLOT(devfn) << MSC01_PCI_CFGADDR_DNUM_SHF)
-		   | (PCI_FUNC(devfn) <<
-		      MSC01_PCI_CFGADDR_FNUM_SHF) | ((where /
-						      4) <<
-						     MSC01_PCI_CFGADDR_RNUM_SHF)
-		   | (type)));
+		   (PCI_SLOT(devfn) << MSC01_PCI_CFGADDR_DNUM_SHF) |
+		   (PCI_FUNC(devfn) << MSC01_PCI_CFGADDR_FNUM_SHF) |
+		   ((where / 4) << MSC01_PCI_CFGADDR_RNUM_SHF)));
 
 	/* Perform access */
 	if (access_type == PCI_ACCESS_WRITE)
@@ -86,15 +68,12 @@ static int msc_pcibios_config_access(unsigned char access_type,
 
 	/* Detect Master/Target abort */
 	MSC_READ(MSC01_PCI_INTSTAT, intr);
-	if (intr & (MSC01_PCI_INTCFG_MA_BIT |
-		    MSC01_PCI_INTCFG_TA_BIT)) {
+	if (intr & (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT)) {
 		/* Error occurred */
 
 		/* Clear bits */
-		MSC_READ(MSC01_PCI_INTSTAT, intr);
 		MSC_WRITE(MSC01_PCI_INTSTAT,
-			  (MSC01_PCI_INTCFG_MA_BIT |
-			   MSC01_PCI_INTCFG_TA_BIT));
+			  (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT));
 
 		return -1;
 	}
diff --git a/arch/mips/pci/ops-nile4.c b/arch/mips/pci/ops-nile4.c
index a7169928b351..a8d38dc8c504 100644
--- a/arch/mips/pci/ops-nile4.c
+++ b/arch/mips/pci/ops-nile4.c
@@ -15,7 +15,7 @@
 
 volatile unsigned long *const vrc_pciregs = (void *) Vrc5074_BASE;
 
-static spinlock_t nile4_pci_lock;
+static DEFINE_SPINLOCK(nile4_pci_lock);
 
 static int nile4_pcibios_config_access(unsigned char access_type,
 	struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
diff --git a/arch/mips/pci/ops-pnx8550.c b/arch/mips/pci/ops-pnx8550.c
new file mode 100644
index 000000000000..454b65cc3354
--- /dev/null
+++ b/arch/mips/pci/ops-pnx8550.c
@@ -0,0 +1,284 @@
+/*
+ *
+ *  BRIEF MODULE DESCRIPTION
+ *
+ *  2.6 port, Embedded Alley Solutions, Inc
+ *
+ *  Based on:
+ *  Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+
+#include <asm/mach-pnx8550/pci.h>
+#include <asm/mach-pnx8550/glb.h>
+#include <asm/debug.h>
+
+
+static inline void clear_status(void)
+{
+	unsigned long pci_stat;
+
+	pci_stat = inl(PCI_BASE | PCI_GPPM_STATUS);
+	outl(pci_stat, PCI_BASE | PCI_GPPM_ICLR);
+}
+
+static inline unsigned int
+calc_cfg_addr(struct pci_bus *bus, unsigned int devfn, int where)
+{
+	unsigned int addr;
+
+	addr = ((bus->number > 0) ? (((bus->number & 0xff) << PCI_CFG_BUS_SHIFT) | 1) : 0);
+	addr |= ((devfn & 0xff) << PCI_CFG_FUNC_SHIFT) | (where & 0xfc);
+
+	return addr;
+}
+
+static int
+config_access(unsigned int pci_cmd, struct pci_bus *bus, unsigned int devfn, int where, unsigned int pci_mode, unsigned int *val)
+{
+	unsigned int flags;
+	unsigned long loops = 0;
+	unsigned long ioaddr = calc_cfg_addr(bus, devfn, where);
+
+	local_irq_save(flags);
+	/*Clear pending interrupt status */
+	if (inl(PCI_BASE | PCI_GPPM_STATUS)) {
+		clear_status();
+		while (!(inl(PCI_BASE | PCI_GPPM_STATUS) == 0)) ;
+	}
+
+	outl(ioaddr, PCI_BASE | PCI_GPPM_ADDR);
+
+	if ((pci_cmd == PCI_CMD_IOW) || (pci_cmd == PCI_CMD_CONFIG_WRITE))
+		outl(*val, PCI_BASE | PCI_GPPM_WDAT);
+
+	outl(INIT_PCI_CYCLE | pci_cmd | (pci_mode & PCI_BYTE_ENABLE_MASK),
+	     PCI_BASE | PCI_GPPM_CTRL);
+
+	loops =
+	    ((loops_per_jiffy *
+	      PCI_IO_JIFFIES_TIMEOUT) >> (PCI_IO_JIFFIES_SHIFT));
+	while (1) {
+		if (inl(PCI_BASE | PCI_GPPM_STATUS) & GPPM_DONE) {
+			if ((pci_cmd == PCI_CMD_IOR) ||
+			    (pci_cmd == PCI_CMD_CONFIG_READ))
+				*val = inl(PCI_BASE | PCI_GPPM_RDAT);
+			clear_status();
+			local_irq_restore(flags);
+			return PCIBIOS_SUCCESSFUL;
+		} else if (inl(PCI_BASE | PCI_GPPM_STATUS) & GPPM_R_MABORT) {
+			break;
+		}
+
+		loops--;
+		if (loops == 0) {
+			printk("%s : Arbiter Locked.\n", __FUNCTION__);
+		}
+	}
+
+	clear_status();
+	if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_IOW)) {
+		printk("%s timeout (GPPM_CTRL=%X) ioaddr %lX pci_cmd %X\n",
+		       __FUNCTION__, inl(PCI_BASE | PCI_GPPM_CTRL), ioaddr,
+		       pci_cmd);
+	}
+
+	if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_CONFIG_READ))
+		*val = 0xffffffff;
+	local_irq_restore(flags);
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+/*
+ * We can't address 8 and 16 bit words directly.  Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int
+read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val)
+{
+	unsigned int data = 0;
+	int err;
+
+	if (bus == 0)
+		return -1;
+
+	err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(1 << (where & 3)), &data);
+	switch (where & 0x03) {
+	case 0:
+		*val = (unsigned char)(data & 0x000000ff);
+		break;
+	case 1:
+		*val = (unsigned char)((data & 0x0000ff00) >> 8);
+		break;
+	case 2:
+		*val = (unsigned char)((data & 0x00ff0000) >> 16);
+		break;
+	case 3:
+		*val = (unsigned char)((data & 0xff000000) >> 24);
+		break;
+	}
+
+	return err;
+}
+
+static int
+read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val)
+{
+	unsigned int data = 0;
+	int err;
+
+	if (bus == 0)
+		return -1;
+
+	if (where & 0x01)
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(3 << (where & 3)), &data);
+	switch (where & 0x02) {
+	case 0:
+		*val = (unsigned short)(data & 0x0000ffff);
+		break;
+	case 2:
+		*val = (unsigned short)((data & 0xffff0000) >> 16);
+		break;
+	}
+
+	return err;
+}
+
+static int
+read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
+{
+	int err;
+	if (bus == 0)
+		return -1;
+
+	if (where & 0x03)
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, 0, val);
+
+	return err;
+}
+
+static int
+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val)
+{
+	unsigned int data = (unsigned int)val;
+	int err;
+
+	if (bus == 0)
+		return -1;
+
+	switch (where & 0x03) {
+	case 1:
+		data = (data << 8);
+		break;
+	case 2:
+		data = (data << 16);
+		break;
+	case 3:
+		data = (data << 24);
+		break;
+	default:
+		break;
+	}
+
+	err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(1 << (where & 3)), &data);
+
+	return err;
+}
+
+static int
+write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val)
+{
+	unsigned int data = (unsigned int)val;
+	int err;
+
+	if (bus == 0)
+		return -1;
+
+	if (where & 0x01)
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	switch (where & 0x02) {
+	case 2:
+		data = (data << 16);
+		break;
+	default:
+		break;
+	}
+	err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, ~(3 << (where & 3)), &data);
+
+	return err;
+}
+
+static int
+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val)
+{
+	int err;
+	if (bus == 0)
+		return -1;
+
+	if (where & 0x03)
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, 0, &val);
+
+	return err;
+}
+
+static int config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
+{
+	switch (size) {
+	case 1: {
+			u8 _val;
+			int rc = read_config_byte(bus, devfn, where, &_val);
+			*val = _val;
+			return rc;
+		}
+       case 2: {
+			u16 _val;
+			int rc = read_config_word(bus, devfn, where, &_val);
+			*val = _val;
+			return rc;
+		}
+	default:
+		return read_config_dword(bus, devfn, where, val);
+	}
+}
+
+static int config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
+{
+	switch (size) {
+	case 1:
+		return write_config_byte(bus, devfn, where, (u8) val);
+	case 2:
+		return write_config_word(bus, devfn, where, (u16) val);
+	default:
+		return write_config_dword(bus, devfn, where, val);
+	}
+}
+
+struct pci_ops pnx8550_pci_ops = {
+	config_read,
+	config_write
+};
diff --git a/arch/mips/pci/ops-tx4938.c b/arch/mips/pci/ops-tx4938.c
new file mode 100644
index 000000000000..4c0dcfce5297
--- /dev/null
+++ b/arch/mips/pci/ops-tx4938.c
@@ -0,0 +1,198 @@
+/*
+ * Define the pci_ops for the Toshiba rbtx4938
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/addrspace.h>
+#include <asm/tx4938/rbtx4938.h>
+
+/* initialize in setup */
+struct resource pci_io_resource = {
+	.name	= "pci IO space",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_IO
+};
+
+/* initialize in setup */
+struct resource pci_mem_resource = {
+	.name	= "pci memory space",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_MEM
+};
+
+struct resource tx4938_pcic1_pci_io_resource = {
+       	.name	= "PCI1 IO",
+       	.start	= 0,
+       	.end	= 0,
+       	.flags	= IORESOURCE_IO
+};
+struct resource tx4938_pcic1_pci_mem_resource = {
+       	.name	= "PCI1 mem",
+       	.start	= 0,
+       	.end	= 0,
+       	.flags	= IORESOURCE_MEM
+};
+
+static int mkaddr(int bus, int dev_fn, int where, int *flagsp)
+{
+	if (bus > 0) {
+		/* Type 1 configuration */
+		tx4938_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
+		    ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1;
+	} else {
+		if (dev_fn >= PCI_DEVFN(TX4938_PCIC_MAX_DEVNU, 0))
+			return -1;
+
+		/* Type 0 configuration */
+		tx4938_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
+		    ((dev_fn & 0xff) << 0x08) | (where & 0xfc);
+	}
+	/* clear M_ABORT and Disable M_ABORT Int. */
+	tx4938_pcicptr->pcistatus =
+	    (tx4938_pcicptr->pcistatus & 0x0000ffff) |
+	    (PCI_STATUS_REC_MASTER_ABORT << 16);
+	tx4938_pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT;
+
+	return 0;
+}
+
+static int check_abort(int flags)
+{
+	int code = PCIBIOS_SUCCESSFUL;
+	/* wait write cycle completion before checking error status */
+	while (tx4938_pcicptr->pcicstatus & TX4938_PCIC_PCICSTATUS_IWB)
+				;
+	if (tx4938_pcicptr->pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) {
+		tx4938_pcicptr->pcistatus =
+		    (tx4938_pcicptr->
+		     pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT
+						<< 16);
+		tx4938_pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT;
+		code = PCIBIOS_DEVICE_NOT_FOUND;
+	}
+	return code;
+}
+
+static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn,
+					int where, int size, u32 * val)
+{
+	int flags, retval, dev, busno, func;
+
+	dev = PCI_SLOT(devfn);
+	func = PCI_FUNC(devfn);
+
+	/* check if the bus is top-level */
+	if (bus->parent != NULL)
+		busno = bus->number;
+	else {
+		busno = 0;
+	}
+
+	if (mkaddr(busno, devfn, where, &flags))
+		return -1;
+
+	switch (size) {
+	case 1:
+		*val = *(volatile u8 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+			      ((where & 3) ^ 3));
+#else
+			      (where & 3));
+#endif
+		break;
+	case 2:
+		*val = *(volatile u16 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+				((where & 3) ^ 2));
+#else
+				(where & 3));
+#endif
+		break;
+	case 4:
+		*val = tx4938_pcicptr->g2pcfgdata;
+		break;
+	}
+
+	retval = check_abort(flags);
+	if (retval == PCIBIOS_DEVICE_NOT_FOUND)
+		*val = 0xffffffff;
+
+	return retval;
+}
+
+static int tx4938_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+						int size, u32 val)
+{
+	int flags, dev, busno, func;
+
+	busno = bus->number;
+	dev = PCI_SLOT(devfn);
+	func = PCI_FUNC(devfn);
+
+	/* check if the bus is top-level */
+	if (bus->parent != NULL) {
+		busno = bus->number;
+	} else {
+		busno = 0;
+	}
+
+	if (mkaddr(busno, devfn, where, &flags))
+		return -1;
+
+	switch (size) {
+	case 1:
+		*(volatile u8 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+			  ((where & 3) ^ 3)) = val;
+#else
+			  (where & 3)) = val;
+#endif
+		break;
+	case 2:
+		*(volatile u16 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+			((where & 0x3) ^ 0x2)) = val;
+#else
+			(where & 3)) = val;
+#endif
+		break;
+	case 4:
+		tx4938_pcicptr->g2pcfgdata = val;
+		break;
+	}
+
+	return check_abort(flags);
+}
+
+struct pci_ops tx4938_pci_ops = {
+	tx4938_pcibios_read_config,
+	tx4938_pcibios_write_config
+};
+
+struct pci_controller tx4938_pci_controller[] = {
+	/* h/w only supports devices 0x00 to 0x14 */
+	{
+		.pci_ops        = &tx4938_pci_ops,
+		.io_resource    = &pci_io_resource,
+		.mem_resource   = &pci_mem_resource,
+	},
+	/* h/w only supports devices 0x00 to 0x14 */
+	{
+		.pci_ops        = &tx4938_pci_ops,
+		.io_resource    = &tx4938_pcic1_pci_io_resource,
+		.mem_resource   = &tx4938_pcic1_pci_mem_resource,
+        }
+};
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
new file mode 100644
index 000000000000..f194b4e4f86a
--- /dev/null
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -0,0 +1,265 @@
+/*
+ * Copyright (C) 2001,2002,2005 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ * BCM1x80/1x55-specific PCI support
+ *
+ * This module provides the glue between Linux's PCI subsystem
+ * and the hardware.  We basically provide glue for accessing
+ * configuration space, and set up the translation for I/O
+ * space accesses.
+ *
+ * To access configuration space, we use ioremap.  In the 32-bit
+ * kernel, this consumes either 4 or 8 page table pages, and 16MB of
+ * kernel mapped memory.  Hopefully neither of these should be a huge
+ * problem.
+ *
+ * XXX: AT THIS TIME, ONLY the NATIVE PCI-X INTERFACE IS SUPPORTED.
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/board.h>
+#include <asm/io.h>
+
+/*
+ * Macros for calculating offsets into config space given a device
+ * structure or dev/fun/reg
+ */
+#define CFGOFFSET(bus,devfn,where) (((bus)<<16)+((devfn)<<8)+(where))
+#define CFGADDR(bus,devfn,where)   CFGOFFSET((bus)->number,(devfn),where)
+
+static void *cfg_space;
+
+#define PCI_BUS_ENABLED	1
+#define PCI_DEVICE_MODE	2
+
+static int bcm1480_bus_status = 0;
+
+#define PCI_BRIDGE_DEVICE  0
+
+/*
+ * Read/write 32-bit values in config space.
+ */
+static inline u32 READCFG32(u32 addr)
+{
+	return *(u32 *)(cfg_space + (addr&~3));
+}
+
+static inline void WRITECFG32(u32 addr, u32 data)
+{
+	*(u32 *)(cfg_space + (addr & ~3)) = data;
+}
+
+int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return dev->irq;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+/*
+ * Some checks before doing config cycles:
+ * In PCI Device Mode, hide everything on bus 0 except the LDT host
+ * bridge.  Otherwise, access is controlled by bridge MasterEn bits.
+ */
+static int bcm1480_pci_can_access(struct pci_bus *bus, int devfn)
+{
+	u32 devno;
+
+	if (!(bcm1480_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
+		return 0;
+
+	if (bus->number == 0) {
+		devno = PCI_SLOT(devfn);
+ 		if (bcm1480_bus_status & PCI_DEVICE_MODE)
+			return 0;
+		else
+			return 1;
+	} else
+		return 1;
+}
+
+/*
+ * Read/write access functions for various sizes of values
+ * in config space.  Return all 1's for disallowed accesses
+ * for a kludgy but adequate simulation of master aborts.
+ */
+
+static int bcm1480_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+				int where, int size, u32 * val)
+{
+	u32 data = 0;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (bcm1480_pci_can_access(bus, devfn))
+		data = READCFG32(CFGADDR(bus, devfn, where));
+	else
+		data = 0xFFFFFFFF;
+
+	if (size == 1)
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+	else if (size == 2)
+		*val = (data >> ((where & 3) << 3)) & 0xffff;
+	else
+		*val = data;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+				int where, int size, u32 val)
+{
+	u32 cfgaddr = CFGADDR(bus, devfn, where);
+	u32 data = 0;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (!bcm1480_pci_can_access(bus, devfn))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	data = READCFG32(cfgaddr);
+
+	if (size == 1)
+		data = (data & ~(0xff << ((where & 3) << 3))) |
+		    (val << ((where & 3) << 3));
+	else if (size == 2)
+		data = (data & ~(0xffff << ((where & 3) << 3))) |
+		    (val << ((where & 3) << 3));
+	else
+		data = val;
+
+	WRITECFG32(cfgaddr, data);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops bcm1480_pci_ops = {
+	bcm1480_pcibios_read,
+	bcm1480_pcibios_write,
+};
+
+static struct resource bcm1480_mem_resource = {
+	.name	= "BCM1480 PCI MEM",
+	.start	= 0x30000000UL,
+	.end	= 0x3fffffffUL,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct resource bcm1480_io_resource = {
+	.name	= "BCM1480 PCI I/O",
+	.start	= 0x2c000000UL,
+	.end	= 0x2dffffffUL,
+	.flags	= IORESOURCE_IO,
+};
+
+struct pci_controller bcm1480_controller = {
+	.pci_ops	= &bcm1480_pci_ops,
+	.mem_resource	= &bcm1480_mem_resource,
+	.io_resource	= &bcm1480_io_resource,
+};
+
+
+static int __init bcm1480_pcibios_init(void)
+{
+	uint32_t cmdreg;
+	uint64_t reg;
+	extern int pci_probe_only;
+
+	/* CFE will assign PCI resources */
+	pci_probe_only = 1;
+
+	/* Avoid ISA compat ranges.  */
+	PCIBIOS_MIN_IO = 0x00008000UL;
+	PCIBIOS_MIN_MEM = 0x01000000UL;
+
+	/* Set I/O resource limits. - unlimited for now to accomodate HT */
+	ioport_resource.end = 0xffffffffUL;
+	iomem_resource.end = 0xffffffffUL;
+
+	cfg_space = ioremap(A_BCM1480_PHYS_PCI_CFG_MATCH_BITS, 16*1024*1024);
+
+	/*
+	 * See if the PCI bus has been configured by the firmware.
+	 */
+	reg = *((volatile uint64_t *) IOADDR(A_SCD_SYSTEM_CFG));
+	if (!(reg & M_BCM1480_SYS_PCI_HOST)) {
+		bcm1480_bus_status |= PCI_DEVICE_MODE;
+	} else {
+		cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
+					     PCI_COMMAND));
+		if (!(cmdreg & PCI_COMMAND_MASTER)) {
+			printk
+			    ("PCI: Skipping PCI probe.  Bus is not initialized.\n");
+			iounmap(cfg_space);
+			return 1; /* XXX */
+		}
+		bcm1480_bus_status |= PCI_BUS_ENABLED;
+	}
+
+	/* turn on ExpMemEn */
+	cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
+	printk("PCIFeatureCtrl = %x\n", cmdreg);
+	WRITECFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40),
+			cmdreg | 0x10);
+	cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
+	printk("PCIFeatureCtrl = %x\n", cmdreg);
+
+	/*
+	 * Establish mappings in KSEG2 (kernel virtual) to PCI I/O
+	 * space.  Use "match bytes" policy to make everything look
+	 * little-endian.  So, you need to also set
+	 * CONFIG_SWAP_IO_SPACE, but this is the combination that
+	 * works correctly with most of Linux's drivers.
+	 * XXX ehs: Should this happen in PCI Device mode?
+	 */
+
+	set_io_port_base((unsigned long)
+		ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536));
+	isa_slot_offset = (unsigned long)
+		ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024);
+
+	register_pci_controller(&bcm1480_controller);
+
+#ifdef CONFIG_VGA_CONSOLE
+	take_over_console(&vga_con,0,MAX_NR_CONSOLES-1,1);
+#endif
+	return 0;
+}
+
+arch_initcall(bcm1480_pcibios_init);
diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c
new file mode 100644
index 000000000000..aca4a2e7a1c6
--- /dev/null
+++ b/arch/mips/pci/pci-bcm1480ht.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2001,2002,2005 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ * BCM1480/1455-specific HT support (looking like PCI)
+ *
+ * This module provides the glue between Linux's PCI subsystem
+ * and the hardware.  We basically provide glue for accessing
+ * configuration space, and set up the translation for I/O
+ * space accesses.
+ *
+ * To access configuration space, we use ioremap.  In the 32-bit
+ * kernel, this consumes either 4 or 8 page table pages, and 16MB of
+ * kernel mapped memory.  Hopefully neither of these should be a huge
+ * problem.
+ *
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/board.h>
+#include <asm/io.h>
+
+/*
+ * Macros for calculating offsets into config space given a device
+ * structure or dev/fun/reg
+ */
+#define CFGOFFSET(bus,devfn,where) (((bus)<<16)+((devfn)<<8)+(where))
+#define CFGADDR(bus,devfn,where)   CFGOFFSET((bus)->number,(devfn),where)
+
+static void *ht_cfg_space;
+
+#define PCI_BUS_ENABLED	1
+#define PCI_DEVICE_MODE	2
+
+static int bcm1480ht_bus_status = 0;
+
+#define PCI_BRIDGE_DEVICE  0
+#define HT_BRIDGE_DEVICE   1
+
+/*
+ * HT's level-sensitive interrupts require EOI, which is generated
+ * through a 4MB memory-mapped region
+ */
+unsigned long ht_eoi_space;
+
+/*
+ * Read/write 32-bit values in config space.
+ */
+static inline u32 READCFG32(u32 addr)
+{
+	return *(u32 *)(ht_cfg_space + (addr&~3));
+}
+
+static inline void WRITECFG32(u32 addr, u32 data)
+{
+	*(u32 *)(ht_cfg_space + (addr & ~3)) = data;
+}
+
+/*
+ * Some checks before doing config cycles:
+ * In PCI Device Mode, hide everything on bus 0 except the LDT host
+ * bridge.  Otherwise, access is controlled by bridge MasterEn bits.
+ */
+static int bcm1480ht_can_access(struct pci_bus *bus, int devfn)
+{
+	u32 devno;
+
+	if (!(bcm1480ht_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
+		return 0;
+
+	if (bus->number == 0) {
+		devno = PCI_SLOT(devfn);
+ 		if (bcm1480ht_bus_status & PCI_DEVICE_MODE)
+			return 0;
+	}
+	return 1;
+}
+
+/*
+ * Read/write access functions for various sizes of values
+ * in config space.  Return all 1's for disallowed accesses
+ * for a kludgy but adequate simulation of master aborts.
+ */
+
+static int bcm1480ht_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+				  int where, int size, u32 * val)
+{
+	u32 data = 0;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (bcm1480ht_can_access(bus, devfn))
+		data = READCFG32(CFGADDR(bus, devfn, where));
+	else
+		data = 0xFFFFFFFF;
+
+	if (size == 1)
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+	else if (size == 2)
+		*val = (data >> ((where & 3) << 3)) & 0xffff;
+	else
+		*val = data;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480ht_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+				   int where, int size, u32 val)
+{
+	u32 cfgaddr = CFGADDR(bus, devfn, where);
+	u32 data = 0;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (!bcm1480ht_can_access(bus, devfn))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	data = READCFG32(cfgaddr);
+
+	if (size == 1)
+		data = (data & ~(0xff << ((where & 3) << 3))) |
+		    (val << ((where & 3) << 3));
+	else if (size == 2)
+		data = (data & ~(0xffff << ((where & 3) << 3))) |
+		    (val << ((where & 3) << 3));
+	else
+		data = val;
+
+	WRITECFG32(cfgaddr, data);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480ht_pcibios_get_busno(void)
+{
+	return 0;
+}
+
+struct pci_ops bcm1480ht_pci_ops = {
+	.read	= bcm1480ht_pcibios_read,
+	.write	= bcm1480ht_pcibios_write,
+};
+
+static struct resource bcm1480ht_mem_resource = {
+	.name	= "BCM1480 HT MEM",
+	.start	= 0x40000000UL,
+	.end	= 0x5fffffffUL,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct resource bcm1480ht_io_resource = {
+	.name	= "BCM1480 HT I/O",
+	.start	= 0x00000000UL,
+	.end	= 0x01ffffffUL,
+	.flags	= IORESOURCE_IO,
+};
+
+struct pci_controller bcm1480ht_controller = {
+	.pci_ops	= &bcm1480ht_pci_ops,
+	.mem_resource	= &bcm1480ht_mem_resource,
+	.io_resource	= &bcm1480ht_io_resource,
+	.index		= 1,
+	.get_busno	= bcm1480ht_pcibios_get_busno,
+};
+
+static int __init bcm1480ht_pcibios_init(void)
+{
+	uint32_t cmdreg;
+
+	ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024);
+
+	/*
+	 * See if the PCI bus has been configured by the firmware.
+	 */
+	cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
+				     PCI_COMMAND));
+	if (!(cmdreg & PCI_COMMAND_MASTER)) {
+		printk("HT: Skipping HT probe. Bus is not initialized.\n");
+		iounmap(ht_cfg_space);
+		return 1; /* XXX */
+	}
+	bcm1480ht_bus_status |= PCI_BUS_ENABLED;
+
+	ht_eoi_space = (unsigned long)
+		ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES,
+			4 * 1024 * 1024);
+
+	register_pci_controller(&bcm1480ht_controller);
+
+	return 0;
+}
+
+arch_initcall(bcm1480ht_pcibios_init);
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 068e0e508e15..efc96ce99eeb 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -485,5 +485,12 @@ static void __init pci_fixup_ioc3(struct pci_dev *d)
 	pci_disable_swapping(d);
 }
 
+int pcibus_to_node(struct pci_bus *bus)
+{
+	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+
+	return bc->nasid;
+}
+
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
 	pci_fixup_ioc3);
diff --git a/arch/mips/pci/pci-ip32.c b/arch/mips/pci/pci-ip32.c
index 000dc6af6cd3..180af89bcb1e 100644
--- a/arch/mips/pci/pci-ip32.c
+++ b/arch/mips/pci/pci-ip32.c
@@ -136,7 +136,9 @@ static int __init mace_init(void)
 	BUG_ON(request_irq(MACE_PCI_BRIDGE_IRQ, macepci_error, 0,
 			   "MACE PCI error", NULL));
 
-	ioport_resource.end = mace_pci_io_resource.end;
+	iomem_resource = mace_pci_mem_resource;
+	ioport_resource = mace_pci_io_resource;
+
 	register_pci_controller(&mace_pci_controller);
 
 	return 0;
diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c
index ae3cc4b254b5..88fb191ad2eb 100644
--- a/arch/mips/pci/pci-lasat.c
+++ b/arch/mips/pci/pci-lasat.c
@@ -7,12 +7,8 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
 #include <asm/bootinfo.h>
 
 extern struct pci_ops nile4_pci_ops;
@@ -20,14 +16,14 @@ extern struct pci_ops gt64120_pci_ops;
 static struct resource lasat_pci_mem_resource = {
 	.name	= "LASAT PCI MEM",
 	.start	= 0x18000000,
-	.end	= 0x19FFFFFF,
+	.end	= 0x19ffffff,
 	.flags	= IORESOURCE_MEM,
 };
 
 static struct resource lasat_pci_io_resource = {
 	.name	= "LASAT PCI IO",
 	.start	= 0x1a000000,
-	.end	= 0x1bFFFFFF,
+	.end	= 0x1bffffff,
 	.flags	= IORESOURCE_IO,
 };
 
@@ -38,23 +34,25 @@ static struct pci_controller lasat_pci_controller = {
 
 static int __init lasat_pci_setup(void)
 {
- 	printk("PCI: starting\n");
+	printk("PCI: starting\n");
 
-        switch (mips_machtype) {
-            case MACH_LASAT_100:
+	switch (mips_machtype) {
+	case MACH_LASAT_100:
                 lasat_pci_controller.pci_ops = &gt64120_pci_ops;
                 break;
-            case MACH_LASAT_200:
+	case MACH_LASAT_200:
                 lasat_pci_controller.pci_ops = &nile4_pci_ops;
                 break;
-            default:
+	default:
                 panic("pcibios_init: mips_machtype incorrect");
         }
 
 	register_pci_controller(&lasat_pci_controller);
-        return 0;
+
+	return 0;
 }
-early_initcall(lasat_pci_setup);
+
+arch_initcall(lasat_pci_setup);
 
 #define LASATINT_ETH1   0
 #define LASATINT_ETH0   1
@@ -68,24 +66,22 @@ early_initcall(lasat_pci_setup);
 
 int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-    switch (slot) {
-        case 1:
-            return LASATINT_PCIA;   /* Expansion Module 0 */
-        case 2:
-            return LASATINT_PCIB;   /* Expansion Module 1 */
-        case 3:
-            return LASATINT_PCIC;   /* Expansion Module 2 */
-        case 4:
-            return LASATINT_ETH1;   /* Ethernet 1 (LAN 2) */
-        case 5:
-            return LASATINT_ETH0;   /* Ethernet 0 (LAN 1) */
-        case 6:
-            return LASATINT_HDC;    /* IDE controller */
-        default:
-            return 0xff;            /* Illegal */
-    }
+	switch (slot) {
+	case 1:
+	case 2:
+	case 3:
+		return LASATINT_PCIA + (((slot-1) + (pin-1)) % 4);
+	case 4:
+		return LASATINT_ETH1;   /* Ethernet 1 (LAN 2) */
+	case 5:
+		return LASATINT_ETH0;   /* Ethernet 0 (LAN 1) */
+	case 6:
+		return LASATINT_HDC;    /* IDE controller */
+	default:
+		return 0xff;            /* Illegal */
+	}
 
-    return -1;
+	return -1;
 }
 
 /* Do platform specific device initialization at pci_enable_device() time */
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index a8d499b0a36f..21402ffd7c98 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -127,15 +127,20 @@ static int __init pcibios_init(void)
 		if (!hose->iommu)
 			PCI_DMA_BUS_IS_PHYS = 1;
 
+		if (hose->get_busno && pci_probe_only)
+			next_busno = (*hose->get_busno)();
+
 		bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
 		hose->bus = bus;
 		hose->need_domain_info = need_domain_info;
-		next_busno = bus->subordinate + 1;
-		/* Don't allow 8-bit bus number overflow inside the hose -
-		   reserve some space for bridges. */
-		if (next_busno > 224) {
-			next_busno = 0;
-			need_domain_info = 1;
+		if (bus) {
+			next_busno = bus->subordinate + 1;
+			/* Don't allow 8-bit bus number overflow inside the hose -
+			   reserve some space for bridges. */
+			if (next_busno > 224) {
+				next_busno = 0;
+				need_domain_info = 1;
+			}
 		}
 		continue;
 
@@ -164,7 +169,7 @@ static int pcibios_enable_resources(struct pci_dev *dev, int mask)
 
 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 	old_cmd = cmd;
-	for(idx=0; idx<6; idx++) {
+	for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
 		/* Only set up the requested stuff */
 		if (!(mask & (1<<idx)))
 			continue;
diff --git a/arch/mips/philips/pnx8550/common/Kconfig b/arch/mips/philips/pnx8550/common/Kconfig
new file mode 100644
index 000000000000..072572d173cc
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/Kconfig
@@ -0,0 +1 @@
+# Place holder
diff --git a/arch/mips/philips/pnx8550/common/Makefile b/arch/mips/philips/pnx8550/common/Makefile
new file mode 100644
index 000000000000..6e38f3bc443c
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/Makefile
@@ -0,0 +1,27 @@
+#
+# Per Hallsmark, per.hallsmark@mvista.com
+#
+# ########################################################################
+#
+# This program is free software; you can distribute it and/or modify it
+# under the terms of the GNU General Public License (Version 2) as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+# #######################################################################
+#
+# Makefile for the PNX8550 specific kernel interface routines
+# under Linux.
+#
+
+obj-y := setup.o prom.o mipsIRQ.o int.o reset.o time.o proc.o platform.o
+obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_KGDB) += gdb_hook.o
diff --git a/arch/mips/philips/pnx8550/common/gdb_hook.c b/arch/mips/philips/pnx8550/common/gdb_hook.c
new file mode 100644
index 000000000000..ad4624f6d9bc
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/gdb_hook.c
@@ -0,0 +1,109 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * This is the interface to the remote debugger stub.
+ *
+ */
+#include <linux/types.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_ip3106.h>
+
+#include <asm/serial.h>
+#include <asm/io.h>
+
+#include <uart.h>
+
+static struct serial_state rs_table[IP3106_NR_PORTS] = {
+};
+static struct async_struct kdb_port_info = {0};
+
+void rs_kgdb_hook(int tty_no)
+{
+	struct serial_state *ser = &rs_table[tty_no];
+
+	kdb_port_info.state = ser;
+	kdb_port_info.magic = SERIAL_MAGIC;
+	kdb_port_info.port  = tty_no;
+	kdb_port_info.flags = ser->flags;
+
+	/*
+	 * Clear all interrupts
+	 */
+	/* Clear all the transmitter FIFO counters (pointer and status) */
+	ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST;
+	/* Clear all the receiver FIFO counters (pointer and status) */
+	ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST;
+	/* Clear all interrupts */
+	ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX |
+		IP3106_UART_INT_ALLTX;
+
+	/*
+	 * Now, initialize the UART
+	 */
+	ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT;
+	ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud
+}
+
+int putDebugChar(char c)
+{
+	/* Wait until FIFO not full */
+	while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
+		;
+	/* Send one char */
+	ip3106_fifo(UART_BASE, kdb_port_info.port) = c;
+
+	return 1;
+}
+
+char getDebugChar(void)
+{
+	char ch;
+
+	/* Wait until there is a char in the FIFO */
+	while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) &
+					IP3106_UART_FIFO_RXFIFO) >> 8))
+		;
+	/* Read one char */
+	ch = ip3106_fifo(UART_BASE, kdb_port_info.port) &
+		IP3106_UART_FIFO_RBRTHR;
+	/* Advance the RX FIFO read pointer */
+	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT;
+	return (ch);
+}
+
+void rs_disable_debug_interrupts(void)
+{
+	ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */
+}
+
+void rs_enable_debug_interrupts(void)
+{
+	/* Clear all the transmitter FIFO counters (pointer and status) */
+	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST;
+	/* Clear all the receiver FIFO counters (pointer and status) */
+	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST;
+	/* Clear all interrupts */
+	ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX |
+		IP3106_UART_INT_ALLTX;
+	ip3106_ien(UART_BASE, kdb_port_info.port)  = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */
+}
diff --git a/arch/mips/philips/pnx8550/common/int.c b/arch/mips/philips/pnx8550/common/int.c
new file mode 100644
index 000000000000..546144988bf5
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/int.c
@@ -0,0 +1,293 @@
+/*
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ * Ported to 2.6.
+ *
+ * Per Hallsmark, per.hallsmark@mvista.com
+ * Copyright (C) 2000, 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2001 Ralf Baechle
+ *
+ * Cleaned up and bug fixing: Pete Popov, ppopov@embeddedalley.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/random.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/gdb-stub.h>
+#include <int.h>
+#include <uart.h>
+
+extern asmlinkage void cp0_irqdispatch(void);
+
+static DEFINE_SPINLOCK(irq_lock);
+
+/* default prio for interrupts */
+/* first one is a no-no so therefore always prio 0 (disabled) */
+static char gic_prio[PNX8550_INT_GIC_TOTINT] = {
+	0, 1, 1, 1, 1, 15, 1, 1, 1, 1,	//   0 -  9
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  10 - 19
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  20 - 29
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  30 - 39
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  40 - 49
+	1, 1, 1, 1, 1, 1, 1, 1, 2, 1,	//  50 - 59
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  60 - 69
+	1			//  70
+};
+
+void hw0_irqdispatch(int irq, struct pt_regs *regs)
+{
+	/* find out which interrupt */
+	irq = PNX8550_GIC_VECTOR_0 >> 3;
+
+	if (irq == 0) {
+		printk("hw0_irqdispatch: irq 0, spurious interrupt?\n");
+		return;
+	}
+	do_IRQ(PNX8550_INT_GIC_MIN + irq, regs);
+}
+
+
+void timer_irqdispatch(int irq, struct pt_regs *regs)
+{
+	irq = (0x01c0 & read_c0_config7()) >> 6;
+
+	if (irq == 0) {
+		printk("timer_irqdispatch: irq 0, spurious interrupt?\n");
+		return;
+	}
+
+	if (irq & 0x1) {
+		do_IRQ(PNX8550_INT_TIMER1, regs);
+	}
+	if (irq & 0x2) {
+		do_IRQ(PNX8550_INT_TIMER2, regs);
+	}
+	if (irq & 0x4) {
+		do_IRQ(PNX8550_INT_TIMER3, regs);
+	}
+}
+
+static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask)
+{
+	unsigned long status = read_c0_status();
+
+	status &= ~((clr_mask & 0xFF) << 8);
+	status |= (set_mask & 0xFF) << 8;
+
+	write_c0_status(status);
+}
+
+static inline void mask_gic_int(unsigned int irq_nr)
+{
+	/* interrupt disabled, bit 26(WE_ENABLE)=1 and bit 16(enable)=0 */
+	PNX8550_GIC_REQ(irq_nr) = 1<<28; /* set priority to 0 */
+}
+
+static inline void unmask_gic_int(unsigned int irq_nr)
+{
+	/* set prio mask to lower four bits and enable interrupt */
+	PNX8550_GIC_REQ(irq_nr) = (1<<26 | 1<<16) | (1<<28) | gic_prio[irq_nr];
+}
+
+static inline void mask_irq(unsigned int irq_nr)
+{
+	if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) {
+		modify_cp0_intmask(1 << irq_nr, 0);
+	} else if ((PNX8550_INT_GIC_MIN <= irq_nr) &&
+		(irq_nr <= PNX8550_INT_GIC_MAX)) {
+		mask_gic_int(irq_nr - PNX8550_INT_GIC_MIN);
+	} else if ((PNX8550_INT_TIMER_MIN <= irq_nr) &&
+		(irq_nr <= PNX8550_INT_TIMER_MAX)) {
+		modify_cp0_intmask(1 << 7, 0);
+	} else {
+		printk("mask_irq: irq %d doesn't exist!\n", irq_nr);
+	}
+}
+
+static inline void unmask_irq(unsigned int irq_nr)
+{
+	if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) {
+		modify_cp0_intmask(0, 1 << irq_nr);
+	} else if ((PNX8550_INT_GIC_MIN <= irq_nr) &&
+		(irq_nr <= PNX8550_INT_GIC_MAX)) {
+		unmask_gic_int(irq_nr - PNX8550_INT_GIC_MIN);
+	} else if ((PNX8550_INT_TIMER_MIN <= irq_nr) &&
+		(irq_nr <= PNX8550_INT_TIMER_MAX)) {
+		modify_cp0_intmask(0, 1 << 7);
+	} else {
+		printk("mask_irq: irq %d doesn't exist!\n", irq_nr);
+	}
+}
+
+#define pnx8550_disable pnx8550_ack
+static void pnx8550_ack(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&irq_lock, flags);
+	mask_irq(irq);
+	spin_unlock_irqrestore(&irq_lock, flags);
+}
+
+#define pnx8550_enable pnx8550_unmask
+static void pnx8550_unmask(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&irq_lock, flags);
+	unmask_irq(irq);
+	spin_unlock_irqrestore(&irq_lock, flags);
+}
+
+static unsigned int startup_irq(unsigned int irq_nr)
+{
+	pnx8550_unmask(irq_nr);
+	return 0;
+}
+
+static void shutdown_irq(unsigned int irq_nr)
+{
+	pnx8550_ack(irq_nr);
+	return;
+}
+
+int pnx8550_set_gic_priority(int irq, int priority)
+{
+	int gic_irq = irq-PNX8550_INT_GIC_MIN;
+	int prev_priority = PNX8550_GIC_REQ(gic_irq) & 0xf;
+
+        gic_prio[gic_irq] = priority;
+	PNX8550_GIC_REQ(gic_irq) |= (0x10000000 | gic_prio[gic_irq]);
+
+	return prev_priority;
+}
+
+static inline void mask_and_ack_level_irq(unsigned int irq)
+{
+	pnx8550_disable(irq);
+	return;
+}
+
+static void end_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
+		pnx8550_enable(irq);
+	}
+}
+
+static struct hw_interrupt_type level_irq_type = {
+	.typename =	"PNX Level IRQ",
+	.startup =	startup_irq,
+	.shutdown =	shutdown_irq,
+	.enable =	pnx8550_enable,
+	.disable =	pnx8550_disable,
+	.ack =		mask_and_ack_level_irq,
+	.end =		end_irq,
+};
+
+static struct irqaction gic_action = {
+	.handler =	no_action,
+	.flags =	SA_INTERRUPT,
+	.name =		"GIC",
+};
+
+static struct irqaction timer_action = {
+	.handler =	no_action,
+	.flags =	SA_INTERRUPT,
+	.name =		"Timer",
+};
+
+void __init arch_init_irq(void)
+{
+	int i;
+	int configPR;
+
+	/* init of cp0 interrupts */
+	set_except_vector(0, cp0_irqdispatch);
+
+	for (i = 0; i < PNX8550_INT_CP0_TOTINT; i++) {
+		irq_desc[i].handler = &level_irq_type;
+		pnx8550_ack(i);	/* mask the irq just in case  */
+	}
+
+	/* init of GIC/IPC interrupts */
+	/* should be done before cp0 since cp0 init enables the GIC int */
+	for (i = PNX8550_INT_GIC_MIN; i <= PNX8550_INT_GIC_MAX; i++) {
+		int gic_int_line = i - PNX8550_INT_GIC_MIN;
+		if (gic_int_line == 0 )
+			continue;	// don't fiddle with int 0
+		/*
+		 * enable change of TARGET, ENABLE and ACTIVE_LOW bits
+		 * set TARGET        0 to route through hw0 interrupt
+		 * set ACTIVE_LOW    0 active high  (correct?)
+		 *
+		 * We really should setup an interrupt description table
+		 * to do this nicely.
+		 * Note, PCI INTA is active low on the bus, but inverted
+		 * in the GIC, so to us it's active high.
+		 */
+#ifdef CONFIG_PNX8550_V2PCI
+		if (gic_int_line == (PNX8550_INT_GPIO0 - PNX8550_INT_GIC_MIN)) {
+			/* PCI INT through gpio 8, which is setup in
+			 * pnx8550_setup.c and routed to GPIO
+ 			 * Interrupt Level 0 (GPIO Connection 58).
+			 * Set it active low. */
+
+			PNX8550_GIC_REQ(gic_int_line) = 0x1E020000;
+		} else
+#endif
+		{
+			PNX8550_GIC_REQ(i - PNX8550_INT_GIC_MIN) = 0x1E000000;
+		}
+
+		/* mask/priority is still 0 so we will not get any
+		 * interrupts until it is unmasked */
+
+		irq_desc[i].handler = &level_irq_type;
+	}
+
+	/* Priority level 0 */
+	PNX8550_GIC_PRIMASK_0 = PNX8550_GIC_PRIMASK_1 = 0;
+
+	/* Set int vector table address */
+	PNX8550_GIC_VECTOR_0 = PNX8550_GIC_VECTOR_1 = 0;
+
+	irq_desc[MIPS_CPU_GIC_IRQ].handler = &level_irq_type;
+	setup_irq(MIPS_CPU_GIC_IRQ, &gic_action);
+
+	/* init of Timer interrupts */
+	for (i = PNX8550_INT_TIMER_MIN; i <= PNX8550_INT_TIMER_MAX; i++) {
+		irq_desc[i].handler = &level_irq_type;
+	}
+
+	/* Stop Timer 1-3 */
+	configPR = read_c0_config7();
+	configPR |= 0x00000038;
+	write_c0_config7(configPR);
+
+	irq_desc[MIPS_CPU_TIMER_IRQ].handler = &level_irq_type;
+	setup_irq(MIPS_CPU_TIMER_IRQ, &timer_action);
+}
+
+EXPORT_SYMBOL(pnx8550_set_gic_priority);
diff --git a/arch/mips/philips/pnx8550/common/mipsIRQ.S b/arch/mips/philips/pnx8550/common/mipsIRQ.S
new file mode 100644
index 000000000000..338bffda3fab
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/mipsIRQ.S
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2002 Philips, Inc. All rights.
+ * Copyright (c) 2002 Red Hat, Inc. All rights.
+ *
+ * This software may be freely redistributed under the terms of the
+ * GNU General Public License.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Based upon arch/mips/galileo-boards/ev64240/int-handler.S
+ *
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ * cp0_irqdispatch
+ *
+ *    Code to handle in-core interrupt exception.
+ */
+
+		.align	5
+		.set	reorder
+		.set	noat
+		NESTED(cp0_irqdispatch, PT_SIZE, sp)
+		SAVE_ALL
+		CLI
+		.set	at
+		mfc0	t0,CP0_CAUSE
+		mfc0	t2,CP0_STATUS
+
+		and	t0,t2
+
+		andi	t1,t0,STATUSF_IP2 /* int0 hardware line */
+		bnez	t1,ll_hw0_irq
+		nop
+
+		andi	t1,t0,STATUSF_IP7 /* int5 hardware line */
+		bnez	t1,ll_timer_irq
+		nop
+
+		/* wrong alarm or masked ... */
+
+		j	spurious_interrupt
+		nop
+		END(cp0_irqdispatch)
+
+		.align	5
+		.set	reorder
+ll_hw0_irq:
+		li	a0,2
+		move	a1,sp
+		jal	hw0_irqdispatch
+		nop
+		j	ret_from_irq
+		nop
+
+		.align	5
+		.set	reorder
+ll_timer_irq:
+		mfc0	t3,CP0_CONFIG,7
+		andi	t4,t3,0x01c0
+		beqz	t4,ll_timer_out
+		nop
+		li	a0,7
+		move	a1,sp
+		jal	timer_irqdispatch
+		nop
+
+ll_timer_out:	j	ret_from_irq
+		nop
diff --git a/arch/mips/philips/pnx8550/common/pci.c b/arch/mips/philips/pnx8550/common/pci.c
new file mode 100644
index 000000000000..baa6905f649f
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/pci.c
@@ -0,0 +1,133 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <pci.h>
+#include <glb.h>
+#include <nand.h>
+
+static struct resource pci_io_resource = {
+	"pci IO space",
+	(u32)(PNX8550_PCIIO + 0x1000),	/* reserve regacy I/O space */
+	(u32)(PNX8550_PCIIO + PNX8550_PCIIO_SIZE),
+	IORESOURCE_IO
+};
+
+static struct resource pci_mem_resource = {
+	"pci memory space",
+	(u32)(PNX8550_PCIMEM),
+	(u32)(PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1),
+	IORESOURCE_MEM
+};
+
+extern struct pci_ops pnx8550_pci_ops;
+
+static struct pci_controller pnx8550_controller = {
+	.pci_ops	= &pnx8550_pci_ops,
+	.io_resource	= &pci_io_resource,
+	.mem_resource	= &pci_mem_resource,
+};
+
+/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
+static inline unsigned long get_system_mem_size(void)
+{
+	/* Read IP2031_RANK0_ADDR_LO */
+	unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
+	/* Read IP2031_RANK1_ADDR_HI */
+	unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
+
+	return dram_r1_hi - dram_r0_lo + 1;
+}
+
+static int __init pnx8550_pci_setup(void)
+{
+	int pci_mem_code;
+	int mem_size = get_system_mem_size() >> 20;
+
+	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
+	   Bit 1:Enable DAC Powerdown
+	  -> 0:DACs are enabled and are working normally
+	     1:DACs are powerdown
+	   Bit 0:Enable of PCI inta output
+	  -> 0 = Disable PCI inta output
+	     1 = Enable PCI inta output
+	*/
+	PNX8550_GLB2_ENAB_INTA_O = 0;
+
+	/* Calc the PCI mem size code */
+	if (mem_size >= 128)
+		pci_mem_code = SIZE_128M;
+	else if (mem_size >= 64)
+		pci_mem_code = SIZE_64M;
+	else if (mem_size >= 32)
+		pci_mem_code = SIZE_32M;
+	else
+		pci_mem_code = SIZE_16M;
+
+	/* Set PCI_XIO registers */
+	outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO);
+	outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI);
+	outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO);
+	outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI);
+
+	/* Send memory transaction via PCI_BASE2 */
+	outl(0x00000001, PCI_BASE | PCI_IO);
+
+	/* Unlock the setup register */
+	outl(0xca, PCI_BASE | PCI_UNLOCKREG);
+
+	/*
+	 * BAR0 of PNX8550 (pci base 10) must be zero in order for ide
+	 * to work, and in order for bus_to_baddr to work without any
+	 * hacks.
+	 */
+	outl(0x00000000, PCI_BASE | PCI_BASE10);
+
+	/*
+	 *These two bars are set by default or the boot code.
+	 * However, it's safer to set them here so we're not boot
+	 * code dependent.
+	 */
+	outl(0x1be00000, PCI_BASE | PCI_BASE14);  /* PNX MMIO */
+	outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18);  /* XIO      */
+
+	outl(PCI_EN_TA |
+	     PCI_EN_PCI2MMI |
+	     PCI_EN_XIO |
+	     PCI_SETUP_BASE18_SIZE(SIZE_32M) |
+	     PCI_SETUP_BASE18_EN |
+	     PCI_SETUP_BASE14_EN |
+	     PCI_SETUP_BASE10_PREF |
+	     PCI_SETUP_BASE10_SIZE(pci_mem_code) |
+	     PCI_SETUP_CFGMANAGE_EN |
+	     PCI_SETUP_PCIARB_EN,
+	     PCI_BASE |
+	     PCI_SETUP);	/* PCI_SETUP */
+	outl(0x00000000, PCI_BASE | PCI_CTRL);	/* PCI_CONTROL */
+
+	register_pci_controller(&pnx8550_controller);
+
+	return 0;
+}
+
+arch_initcall(pnx8550_pci_setup);
diff --git a/arch/mips/philips/pnx8550/common/platform.c b/arch/mips/philips/pnx8550/common/platform.c
new file mode 100644
index 000000000000..8aa9bd65b45e
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/platform.c
@@ -0,0 +1,135 @@
+/*
+ * Platform device support for Philips PNX8550 SoCs
+ *
+ * Copyright 2005, Embedded Alley Solutions, Inc
+ *
+ * Based on arch/mips/au1000/common/platform.c
+ * Platform device support for Au1x00 SoCs.
+ *
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+#include <linux/serial.h>
+#include <linux/serial_ip3106.h>
+
+#include <int.h>
+#include <usb.h>
+#include <uart.h>
+
+extern struct uart_ops ip3106_pops;
+
+static struct resource pnx8550_usb_ohci_resources[] = {
+	[0] = {
+		.start		= PNX8550_USB_OHCI_OP_BASE,
+		.end		= PNX8550_USB_OHCI_OP_BASE +
+				  PNX8550_USB_OHCI_OP_LEN,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= PNX8550_INT_USB,
+		.end		= PNX8550_INT_USB,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource pnx8550_uart_resources[] = {
+	[0] = {
+		.start		= PNX8550_UART_PORT0,
+		.end		= PNX8550_UART_PORT0 + 0xfff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= PNX8550_UART_INT(0),
+		.end		= PNX8550_UART_INT(0),
+		.flags		= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start		= PNX8550_UART_PORT1,
+		.end		= PNX8550_UART_PORT1 + 0xfff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[3] = {
+		.start		= PNX8550_UART_INT(1),
+		.end		= PNX8550_UART_INT(1),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+struct ip3106_port ip3106_ports[] = {
+	[0] = {
+		.port   = {
+			.type		= PORT_IP3106,
+			.iotype		= SERIAL_IO_MEM,
+			.membase	= (void __iomem *)PNX8550_UART_PORT0,
+			.mapbase	= PNX8550_UART_PORT0,
+			.irq		= PNX8550_UART_INT(0),
+			.uartclk	= 3692300,
+			.fifosize	= 16,
+			.ops		= &ip3106_pops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+	},
+	[1] = {
+		.port   = {
+			.type		= PORT_IP3106,
+			.iotype		= SERIAL_IO_MEM,
+			.membase	= (void __iomem *)PNX8550_UART_PORT1,
+			.mapbase	= PNX8550_UART_PORT1,
+			.irq		= PNX8550_UART_INT(1),
+			.uartclk	= 3692300,
+			.fifosize	= 16,
+			.ops		= &ip3106_pops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 1,
+		},
+	},
+};
+
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32)0;
+
+static u64 uart_dmamask = ~(u32)0;
+
+static struct platform_device pnx8550_usb_ohci_device = {
+	.name		= "pnx8550-ohci",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &ohci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(pnx8550_usb_ohci_resources),
+	.resource	= pnx8550_usb_ohci_resources,
+};
+
+static struct platform_device pnx8550_uart_device = {
+	.name		= "ip3106-uart",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &uart_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data = ip3106_ports,
+	},
+	.num_resources	= ARRAY_SIZE(pnx8550_uart_resources),
+	.resource	= pnx8550_uart_resources,
+};
+
+static struct platform_device *pnx8550_platform_devices[] __initdata = {
+	&pnx8550_usb_ohci_device,
+	&pnx8550_uart_device,
+};
+
+int pnx8550_platform_init(void)
+{
+	return platform_add_devices(pnx8550_platform_devices,
+			            ARRAY_SIZE(pnx8550_platform_devices));
+}
+
+arch_initcall(pnx8550_platform_init);
diff --git a/arch/mips/philips/pnx8550/common/proc.c b/arch/mips/philips/pnx8550/common/proc.c
new file mode 100644
index 000000000000..72a016767e09
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/proc.c
@@ -0,0 +1,113 @@
+/*
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/random.h>
+
+#include <asm/io.h>
+#include <asm/gdb-stub.h>
+#include <int.h>
+#include <uart.h>
+
+
+static int pnx8550_timers_read (char* page, char** start, off_t offset, int count, int* eof, void* data)
+{
+        int len = 0;
+	int configPR = read_c0_config7();
+
+        if (offset==0) {
+		len += sprintf(&page[len],"Timer:       count,  compare, tc, status\n");
+                len += sprintf(&page[len],"    1: %11i, %8i,  %1i, %s\n",
+			       read_c0_count(), read_c0_compare(),
+			      (configPR>>6)&0x1, ((configPR>>3)&0x1)? "off":"on");
+                len += sprintf(&page[len],"    2: %11i, %8i,  %1i, %s\n",
+			       read_c0_count2(), read_c0_compare2(),
+			      (configPR>>7)&0x1, ((configPR>>4)&0x1)? "off":"on");
+                len += sprintf(&page[len],"    3: %11i, %8i,  %1i, %s\n",
+			       read_c0_count3(), read_c0_compare3(),
+			      (configPR>>8)&0x1, ((configPR>>5)&0x1)? "off":"on");
+        }
+
+        return len;
+}
+
+static int pnx8550_registers_read (char* page, char** start, off_t offset, int count, int* eof, void* data)
+{
+        int len = 0;
+
+        if (offset==0) {
+                len += sprintf(&page[len],"config1:   %#10.8x\n",read_c0_config1());
+                len += sprintf(&page[len],"config2:   %#10.8x\n",read_c0_config2());
+                len += sprintf(&page[len],"config3:   %#10.8x\n",read_c0_config3());
+                len += sprintf(&page[len],"configPR:  %#10.8x\n",read_c0_config7());
+                len += sprintf(&page[len],"status:    %#10.8x\n",read_c0_status());
+                len += sprintf(&page[len],"cause:     %#10.8x\n",read_c0_cause());
+                len += sprintf(&page[len],"count:     %#10.8x\n",read_c0_count());
+                len += sprintf(&page[len],"count_2:   %#10.8x\n",read_c0_count2());
+                len += sprintf(&page[len],"count_3:   %#10.8x\n",read_c0_count3());
+                len += sprintf(&page[len],"compare:   %#10.8x\n",read_c0_compare());
+                len += sprintf(&page[len],"compare_2: %#10.8x\n",read_c0_compare2());
+                len += sprintf(&page[len],"compare_3: %#10.8x\n",read_c0_compare3());
+        }
+
+        return len;
+}
+
+static struct proc_dir_entry* pnx8550_dir        = NULL;
+static struct proc_dir_entry* pnx8550_timers     = NULL;
+static struct proc_dir_entry* pnx8550_registers  = NULL;
+
+static int pnx8550_proc_init( void )
+{
+
+	// Create /proc/pnx8550
+        pnx8550_dir = create_proc_entry("pnx8550", S_IFDIR|S_IRUGO, NULL);
+        if (pnx8550_dir){
+                pnx8550_dir->nlink = 1;
+        }
+        else {
+                printk(KERN_ERR "Can't create pnx8550 proc dir\n");
+                return -1;
+        }
+
+	// Create /proc/pnx8550/timers
+        pnx8550_timers = create_proc_entry("timers", S_IFREG|S_IRUGO, pnx8550_dir );
+        if (pnx8550_timers){
+                pnx8550_timers->nlink = 1;
+                pnx8550_timers->read_proc = pnx8550_timers_read;
+        }
+        else {
+                printk(KERN_ERR "Can't create pnx8550 timers proc file\n");
+        }
+
+	// Create /proc/pnx8550/registers
+        pnx8550_registers = create_proc_entry("registers", S_IFREG|S_IRUGO, pnx8550_dir );
+        if (pnx8550_registers){
+                pnx8550_registers->nlink = 1;
+                pnx8550_registers->read_proc = pnx8550_registers_read;
+        }
+        else {
+                printk(KERN_ERR "Can't create pnx8550 registers proc file\n");
+        }
+
+	return 0;
+}
+
+__initcall(pnx8550_proc_init);
diff --git a/arch/mips/philips/pnx8550/common/prom.c b/arch/mips/philips/pnx8550/common/prom.c
new file mode 100644
index 000000000000..70aac9759412
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/prom.c
@@ -0,0 +1,138 @@
+/*
+ *
+ * Per Hallsmark, per.hallsmark@mvista.com
+ *
+ * Based on jmr3927/common/prom.c
+ *
+ * 2004 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/serial_ip3106.h>
+
+#include <asm/bootinfo.h>
+#include <uart.h>
+
+/* #define DEBUG_CMDLINE */
+
+extern int prom_argc;
+extern char **prom_argv, **prom_envp;
+
+typedef struct
+{
+    char *name;
+/*    char *val; */
+}t_env_var;
+
+
+char * prom_getcmdline(void)
+{
+	return &(arcs_cmdline[0]);
+}
+
+void  prom_init_cmdline(void)
+{
+	char *cp;
+	int actr;
+
+	actr = 1; /* Always ignore argv[0] */
+
+	cp = &(arcs_cmdline[0]);
+	while(actr < prom_argc) {
+	        strcpy(cp, prom_argv[actr]);
+		cp += strlen(prom_argv[actr]);
+		*cp++ = ' ';
+		actr++;
+	}
+	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
+		--cp;
+	*cp = '\0';
+}
+
+char *prom_getenv(char *envname)
+{
+	/*
+	 * Return a pointer to the given environment variable.
+	 * Environment variables are stored in the form of "memsize=64".
+	 */
+
+	t_env_var *env = (t_env_var *)prom_envp;
+	int i;
+
+	i = strlen(envname);
+
+	while(env->name) {
+		if(strncmp(envname, env->name, i) == 0) {
+			return(env->name + strlen(envname) + 1);
+		}
+		env++;
+	}
+	return(NULL);
+}
+
+inline unsigned char str2hexnum(unsigned char c)
+{
+	if(c >= '0' && c <= '9')
+		return c - '0';
+	if(c >= 'a' && c <= 'f')
+		return c - 'a' + 10;
+	if(c >= 'A' && c <= 'F')
+		return c - 'A' + 10;
+	return 0; /* foo */
+}
+
+inline void str2eaddr(unsigned char *ea, unsigned char *str)
+{
+	int i;
+
+	for(i = 0; i < 6; i++) {
+		unsigned char num;
+
+		if((*str == '.') || (*str == ':'))
+			str++;
+		num = str2hexnum(*str++) << 4;
+		num |= (str2hexnum(*str++));
+		ea[i] = num;
+	}
+}
+
+int get_ethernet_addr(char *ethernet_addr)
+{
+        char *ethaddr_str;
+
+        ethaddr_str = prom_getenv("ethaddr");
+	if (!ethaddr_str) {
+	        printk("ethaddr not set in boot prom\n");
+		return -1;
+	}
+	str2eaddr(ethernet_addr, ethaddr_str);
+	return 0;
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+	return 0;
+}
+
+extern int pnx8550_console_port;
+
+/* used by prom_printf */
+void prom_putchar(char c)
+{
+	if (pnx8550_console_port != -1) {
+		/* Wait until FIFO not full */
+		while( ((ip3106_fifo(UART_BASE, pnx8550_console_port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
+			;
+		/* Send one char */
+		ip3106_fifo(UART_BASE, pnx8550_console_port) = c;
+	}
+}
+
+EXPORT_SYMBOL(prom_getcmdline);
+EXPORT_SYMBOL(get_ethernet_addr);
+EXPORT_SYMBOL(str2eaddr);
diff --git a/arch/mips/philips/pnx8550/common/reset.c b/arch/mips/philips/pnx8550/common/reset.c
new file mode 100644
index 000000000000..7b2cbc5b2c7c
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/reset.c
@@ -0,0 +1,49 @@
+/*.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Reset the PNX8550 board.
+ *
+ */
+#include <linux/slab.h>
+#include <asm/reboot.h>
+#include <glb.h>
+
+void pnx8550_machine_restart(char *command)
+{
+	char head[] = "************* Machine restart *************";
+	char foot[] = "*******************************************";
+
+	printk("\n\n");
+	printk("%s\n", head);
+	if (command != NULL)
+		printk("* %s\n", command);
+	printk("%s\n", foot);
+
+	PNX8550_RST_CTL = PNX8550_RST_DO_SW_RST;
+}
+
+void pnx8550_machine_halt(void)
+{
+	printk("*** Machine halt. (Not implemented) ***\n");
+}
+
+void pnx8550_machine_power_off(void)
+{
+	printk("*** Machine power off.  (Not implemented) ***\n");
+}
diff --git a/arch/mips/philips/pnx8550/common/setup.c b/arch/mips/philips/pnx8550/common/setup.c
new file mode 100644
index 000000000000..ee6bf72094f6
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/setup.c
@@ -0,0 +1,149 @@
+/*
+ *
+ * 2.6 port, Embedded Alley Solutions, Inc
+ *
+ *  Based on Per Hallsmark, per.hallsmark@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/serial_ip3106.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/time.h>
+
+#include <glb.h>
+#include <int.h>
+#include <pci.h>
+#include <uart.h>
+#include <nand.h>
+
+extern void prom_printf(char *fmt, ...);
+
+extern void __init board_setup(void);
+extern void pnx8550_machine_restart(char *);
+extern void pnx8550_machine_halt(void);
+extern void pnx8550_machine_power_off(void);
+extern struct resource ioport_resource;
+extern struct resource iomem_resource;
+extern void (*board_time_init)(void);
+extern void pnx8550_time_init(void);
+extern void (*board_timer_setup)(struct irqaction *irq);
+extern void pnx8550_timer_setup(struct irqaction *irq);
+extern void rs_kgdb_hook(int tty_no);
+extern void prom_printf(char *fmt, ...);
+extern char *prom_getcmdline(void);
+
+struct resource standard_io_resources[] = {
+	{"dma1", 0x00, 0x1f, IORESOURCE_BUSY},
+	{"timer", 0x40, 0x5f, IORESOURCE_BUSY},
+	{"dma page reg", 0x80, 0x8f, IORESOURCE_BUSY},
+	{"dma2", 0xc0, 0xdf, IORESOURCE_BUSY},
+};
+
+#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource))
+
+extern struct resource pci_io_resource;
+extern struct resource pci_mem_resource;
+
+/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
+unsigned long get_system_mem_size(void)
+{
+	/* Read IP2031_RANK0_ADDR_LO */
+	unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
+	/* Read IP2031_RANK1_ADDR_HI */
+	unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
+
+	return dram_r1_hi - dram_r0_lo + 1;
+}
+
+int pnx8550_console_port = -1;
+
+void __init plat_setup(void)
+{
+	int i;
+	char* argptr;
+
+	board_setup();  /* board specific setup */
+
+        _machine_restart = pnx8550_machine_restart;
+        _machine_halt = pnx8550_machine_halt;
+        _machine_power_off = pnx8550_machine_power_off;
+
+	board_time_init = pnx8550_time_init;
+	board_timer_setup = pnx8550_timer_setup;
+
+	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
+	   Bit 1:Enable DAC Powerdown
+	  -> 0:DACs are enabled and are working normally
+	     1:DACs are powerdown
+	   Bit 0:Enable of PCI inta output
+	  -> 0 = Disable PCI inta output
+	     1 = Enable PCI inta output
+	*/
+	PNX8550_GLB2_ENAB_INTA_O = 0;
+
+	/* IO/MEM resources. */
+	set_io_port_base(KSEG1);
+	ioport_resource.start = 0;
+	ioport_resource.end = ~0;
+	iomem_resource.start = 0;
+	iomem_resource.end = ~0;
+
+	/* Request I/O space for devices on this board */
+	for (i = 0; i < STANDARD_IO_RESOURCES; i++)
+		request_resource(&ioport_resource, standard_io_resources + i);
+
+	/* Place the Mode Control bit for GPIO pin 16 in primary function */
+	/* Pin 16 is used by UART1, UA1_TX                                */
+	outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
+			(PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
+			PNX8550_GPIO_MC1);
+
+	argptr = prom_getcmdline();
+	if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
+		argptr += strlen("console=ttyS");
+		pnx8550_console_port = *argptr == '0' ? 0 : 1;
+
+		/* We must initialize the UART (console) before prom_printf */
+		/* Set LCR to 8-bit and BAUD to 38400 (no 5)                */
+		ip3106_lcr(UART_BASE, pnx8550_console_port) =
+			IP3106_UART_LCR_8BIT;
+		ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
+	}
+
+#ifdef CONFIG_KGDB
+	argptr = prom_getcmdline();
+	if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
+		int line;
+		argptr += strlen("kgdb=ttyS");
+		line = *argptr == '0' ? 0 : 1;
+		rs_kgdb_hook(line);
+		prom_printf("KGDB: Using ttyS%i for session, "
+				"please connect your debugger\n", line ? 1 : 0);
+	}
+#endif
+	return;
+}
diff --git a/arch/mips/philips/pnx8550/common/time.c b/arch/mips/philips/pnx8550/common/time.c
new file mode 100644
index 000000000000..70664ea96b92
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/time.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2001, 2002, 2003 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * Common time service routines for MIPS machines. See
+ * Documents/MIPS/README.txt.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/param.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/smp.h>
+#include <linux/kernel_stat.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/bootinfo.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+#include <asm/hardirq.h>
+#include <asm/div64.h>
+#include <asm/debug.h>
+
+#include <int.h>
+#include <cm.h>
+
+extern unsigned int mips_hpt_frequency;
+
+/*
+ * pnx8550_time_init() - it does the following things:
+ *
+ * 1) board_time_init() -
+ * 	a) (optional) set up RTC routines,
+ *      b) (optional) calibrate and set the mips_hpt_frequency
+ *	    (only needed if you intended to use fixed_rate_gettimeoffset
+ *	     or use cpu counter as timer interrupt source)
+ */
+
+void pnx8550_time_init(void)
+{
+	unsigned int             n;
+	unsigned int             m;
+	unsigned int             p;
+	unsigned int             pow2p;
+
+        /* PLL0 sets MIPS clock (PLL1 <=> TM1, PLL6 <=> TM2, PLL5 <=> mem) */
+        /* (but only if CLK_MIPS_CTL select value [bits 3:1] is 1:  FIXME) */
+
+        n = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_N_MASK) >> 16;
+        m = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_M_MASK) >> 8;
+        p = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_P_MASK) >> 2;
+	pow2p = (1 << p);
+
+	db_assert(m != 0 && pow2p != 0);
+
+        /*
+	 * Compute the frequency as in the PNX8550 User Manual 1.0, p.186
+	 * (a.k.a. 8-10).  Divide by HZ for a timer offset that results in
+	 * HZ timer interrupts per second.
+	 */
+	mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p));
+}
+
+/*
+ * pnx8550_timer_setup() - it does the following things:
+ *
+ * 5) board_timer_setup() -
+ *	a) (optional) over-write any choices made above by time_init().
+ *	b) machine specific code should setup the timer irqaction.
+ *	c) enable the timer interrupt
+ */
+
+void __init pnx8550_timer_setup(struct irqaction *irq)
+{
+	int configPR;
+
+	setup_irq(PNX8550_INT_TIMER1, irq);
+
+	/* Start timer1 */
+	configPR = read_c0_config7();
+	configPR &= ~0x00000008;
+	write_c0_config7(configPR);
+
+	/* Timer 2 stop */
+	configPR = read_c0_config7();
+	configPR |= 0x00000010;
+	write_c0_config7(configPR);
+
+	write_c0_count2(0);
+	write_c0_compare2(0xffffffff);
+
+	/* Timer 3 stop */
+	configPR = read_c0_config7();
+	configPR |= 0x00000020;
+	write_c0_config7(configPR);
+}
diff --git a/arch/mips/philips/pnx8550/jbs/Makefile b/arch/mips/philips/pnx8550/jbs/Makefile
new file mode 100644
index 000000000000..e8228dbca8f6
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/Makefile
@@ -0,0 +1,4 @@
+
+# Makefile for the Philips JBS Board.
+
+lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/philips/pnx8550/jbs/board_setup.c b/arch/mips/philips/pnx8550/jbs/board_setup.c
new file mode 100644
index 000000000000..f92826e0096d
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/board_setup.c
@@ -0,0 +1,65 @@
+/*
+ *  JBS Specific board startup routines.
+ *
+ *  Copyright 2005, Embedded Alley Solutions, Inc
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+
+#include <glb.h>
+
+/* CP0 hazard avoidance. */
+#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
+				     "nop; nop; nop; nop; nop; nop;\n\t" \
+				     ".set reorder\n\t")
+
+void __init board_setup(void)
+{
+	unsigned long config0, configpr;
+
+	config0 = read_c0_config();
+
+	/* clear all three cache coherency fields */
+	config0 &= ~(0x7 | (7<<25) | (7<<28));
+	config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) |
+			(CONF_CM_DEFAULT<<28));
+	write_c0_config(config0);
+	BARRIER;
+
+	configpr = read_c0_config7();
+	configpr |= (1<<19); /* enable tlb */
+	write_c0_config7(configpr);
+	BARRIER;
+}
diff --git a/arch/mips/philips/pnx8550/jbs/init.c b/arch/mips/philips/pnx8550/jbs/init.c
new file mode 100644
index 000000000000..85f449174bc3
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/init.c
@@ -0,0 +1,57 @@
+/*
+ *
+ *  Copyright 2005 Embedded Alley Solutions, Inc
+ *  source@embeddedalley.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+extern void  __init prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+	return "Philips PNX8550/JBS";
+}
+
+void __init prom_init(void)
+{
+
+	unsigned long memsize;
+
+	mips_machgroup = MACH_GROUP_PHILIPS;
+	mips_machtype = MACH_PHILIPS_JBS;
+
+	//memsize = 0x02800000; /* Trimedia uses memory above */
+	memsize = 0x08000000; /* Trimedia uses memory above */
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/philips/pnx8550/jbs/irqmap.c b/arch/mips/philips/pnx8550/jbs/irqmap.c
new file mode 100644
index 000000000000..f78e0423dc98
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/irqmap.c
@@ -0,0 +1,36 @@
+/*
+ *  Philips JBS board irqmap.
+ *
+ *  Copyright 2005 Embedded Alley Solutions, Inc
+ *  source@embeddealley.com
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <int.h>
+
+char irq_tab_jbs[][5] __initdata = {
+ [8] =	{ -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+ [9] =	{ -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+ [17] =	{ -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+};
+
diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig
new file mode 100644
index 000000000000..24d514c9dff9
--- /dev/null
+++ b/arch/mips/pmc-sierra/Kconfig
@@ -0,0 +1,3 @@
+config HYPERTRANSPORT
+	bool "Hypertransport Support for PMC-Sierra Yosemite"
+	depends on PMC_YOSEMITE
diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
index c19f01a32045..a31288335fba 100644
--- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
+++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
@@ -34,7 +34,6 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
-#include <linux/version.h>
 #include <asm/pci.h>
 #include <asm/io.h>
 #include <linux/init.h>
diff --git a/arch/mips/pmc-sierra/yosemite/ht-irq.c b/arch/mips/pmc-sierra/yosemite/ht-irq.c
index d22c9ffe4914..5aec4057314e 100644
--- a/arch/mips/pmc-sierra/yosemite/ht-irq.c
+++ b/arch/mips/pmc-sierra/yosemite/ht-irq.c
@@ -26,7 +26,6 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <asm/pci.h>
 
diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c
index dad228d3a220..54b65a80abf5 100644
--- a/arch/mips/pmc-sierra/yosemite/ht.c
+++ b/arch/mips/pmc-sierra/yosemite/ht.c
@@ -28,7 +28,6 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
-#include <linux/version.h>
 #include <asm/pci.h>
 #include <asm/io.h>
 
diff --git a/arch/mips/pmc-sierra/yosemite/prom.c b/arch/mips/pmc-sierra/yosemite/prom.c
index 1fb3e697948d..555bfacf7647 100644
--- a/arch/mips/pmc-sierra/yosemite/prom.c
+++ b/arch/mips/pmc-sierra/yosemite/prom.c
@@ -132,8 +132,9 @@ void __init prom_init(void)
 	prom_grab_secondary();
 }
 
-void __init prom_free_prom_memory(void)
+unsigned long __init prom_free_prom_memory(void)
 {
+	return 0;
 }
 
 void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c
index 7225bbf20ce4..bdc2ab55bed6 100644
--- a/arch/mips/pmc-sierra/yosemite/setup.c
+++ b/arch/mips/pmc-sierra/yosemite/setup.c
@@ -212,7 +212,7 @@ static void __init py_late_time_init(void)
 	py_rtc_setup();
 }
 
-static int __init pmc_yosemite_setup(void)
+void __init plat_setup(void)
 {
 	board_time_init = yosemite_time_init;
 	late_time_init = py_late_time_init;
@@ -228,8 +228,4 @@ static int __init pmc_yosemite_setup(void)
 	OCD_WRITE(RM9000x2_OCD_HTBAR0, HYPERTRANSPORT_BAR0_ADDR);
 	OCD_WRITE(RM9000x2_OCD_HTMASK0, HYPERTRANSPORT_SIZE0);
 #endif
-
-	return 0;
 }
-
-early_initcall(pmc_yosemite_setup);
diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c
index 1d3b0734c78c..0527170d6adb 100644
--- a/arch/mips/pmc-sierra/yosemite/smp.c
+++ b/arch/mips/pmc-sierra/yosemite/smp.c
@@ -9,7 +9,7 @@ extern void (*mips_hpt_init)(unsigned int);
 
 #define LAUNCHSTACK_SIZE 256
 
-static spinlock_t launch_lock __initdata;
+static __initdata DEFINE_SPINLOCK(launch_lock);
 
 static unsigned long secondary_sp __initdata;
 static unsigned long secondary_gp __initdata;
diff --git a/arch/mips/qemu/q-setup.c b/arch/mips/qemu/q-setup.c
index 1a80eee8cd35..022eb1af6db1 100644
--- a/arch/mips/qemu/q-setup.c
+++ b/arch/mips/qemu/q-setup.c
@@ -4,6 +4,11 @@
 
 #define QEMU_PORT_BASE 0xb4000000
 
+const char *get_system_type(void)
+{
+	return "Qemu";
+}
+
 static void __init qemu_timer_setup(struct irqaction *irq)
 {
 	/* set the clock to 100 Hz */
diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c
index fa0e719c5bd1..b19820110aa3 100644
--- a/arch/mips/sgi-ip22/ip22-eisa.c
+++ b/arch/mips/sgi-ip22/ip22-eisa.c
@@ -29,6 +29,7 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mipsregs.h>
 #include <asm/addrspace.h>
@@ -37,42 +38,29 @@
 #include <asm/sgi/mc.h>
 #include <asm/sgi/ip22.h>
 
-#define EISA_MAX_SLOTS		  4
+/* I2 has four EISA slots. */
+#define IP22_EISA_MAX_SLOTS	  4
 #define EISA_MAX_IRQ             16
 
-#define EISA_TO_PHYS(x)  (0x00080000 | (x))
-#define EISA_TO_KSEG1(x) ((void *) KSEG1ADDR(EISA_TO_PHYS((x))))
-
-#define EIU_MODE_REG     0x0009ffc0
-#define EIU_STAT_REG     0x0009ffc4
-#define EIU_PREMPT_REG   0x0009ffc8
-#define EIU_QUIET_REG    0x0009ffcc
-#define EIU_INTRPT_ACK   0x00090004
-
-#define EISA_DMA1_STATUS            8
-#define EISA_INT1_CTRL           0x20
-#define EISA_INT1_MASK           0x21
-#define EISA_INT2_CTRL           0xA0
-#define EISA_INT2_MASK           0xA1
-#define EISA_DMA2_STATUS         0xD0
-#define EISA_DMA2_WRITE_SINGLE   0xD4
-#define EISA_EXT_NMI_RESET_CTRL 0x461
-#define EISA_INT1_EDGE_LEVEL    0x4D0
-#define EISA_INT2_EDGE_LEVEL    0x4D1
-#define EISA_VENDOR_ID_OFFSET   0xC80
-
-#define EIU_WRITE_32(x,y) { *((u32 *) KSEG1ADDR(x)) = (u32) (y); mb(); }
-#define EIU_READ_8(x) *((u8 *) KSEG1ADDR(x))
-#define EISA_WRITE_8(x,y) { *((u8 *) EISA_TO_KSEG1(x)) = (u8) (y); mb(); }
-#define EISA_READ_8(x) *((u8 *) EISA_TO_KSEG1(x))
-
-static char *decode_eisa_sig(u8 * sig)
+#define EIU_MODE_REG     0x0001ffc0
+#define EIU_STAT_REG     0x0001ffc4
+#define EIU_PREMPT_REG   0x0001ffc8
+#define EIU_QUIET_REG    0x0001ffcc
+#define EIU_INTRPT_ACK   0x00010004
+
+static char __init *decode_eisa_sig(unsigned long addr)
 {
-	static char sig_str[8];
-	u16 rev;
+        static char sig_str[EISA_SIG_LEN];
+	u8 sig[4];
+        u16 rev;
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		sig[i] = inb (addr + i);
 
-	if (sig[0] & 0x80)
-		return NULL;
+		if (!i && (sig[0] & 0x80))
+			return NULL;
+	}
 
 	sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1);
 	sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1);
@@ -83,23 +71,26 @@ static char *decode_eisa_sig(u8 * sig)
 	return sig_str;
 }
 
-static void ip22_eisa_intr(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t ip22_eisa_intr(int irq, void *dev_id, struct pt_regs *regs)
 {
 	u8 eisa_irq;
 	u8 dma1, dma2;
 
-	eisa_irq = EIU_READ_8(EIU_INTRPT_ACK);
-	dma1 = EISA_READ_8(EISA_DMA1_STATUS);
-	dma2 = EISA_READ_8(EISA_DMA2_STATUS);
-
-	if (eisa_irq >= EISA_MAX_IRQ) {
-		/* Oops, Bad Stuff Happened... */
-		printk(KERN_ERR "eisa_irq %d out of bound\n", eisa_irq);
+	eisa_irq = inb(EIU_INTRPT_ACK);
+	dma1 = inb(EISA_DMA1_STATUS);
+	dma2 = inb(EISA_DMA2_STATUS);
 
-		EISA_WRITE_8(EISA_INT2_CTRL, 0x20);
-		EISA_WRITE_8(EISA_INT1_CTRL, 0x20);
-	} else
+	if (eisa_irq < EISA_MAX_IRQ) {
 		do_IRQ(eisa_irq, regs);
+		return IRQ_HANDLED;
+	}
+
+	/* Oops, Bad Stuff Happened... */
+	printk(KERN_ERR "eisa_irq %d out of bound\n", eisa_irq);
+
+	outb(0x20, EISA_INT2_CTRL);
+	outb(0x20, EISA_INT1_CTRL);
+	return IRQ_NONE;
 }
 
 static void enable_eisa1_irq(unsigned int irq)
@@ -109,9 +100,9 @@ static void enable_eisa1_irq(unsigned int irq)
 
 	local_irq_save(flags);
 
-	mask = EISA_READ_8(EISA_INT1_MASK);
+	mask = inb(EISA_INT1_MASK);
 	mask &= ~((u8) (1 << irq));
-	EISA_WRITE_8(EISA_INT1_MASK, mask);
+	outb(mask, EISA_INT1_MASK);
 
 	local_irq_restore(flags);
 }
@@ -122,9 +113,9 @@ static unsigned int startup_eisa1_irq(unsigned int irq)
 
 	/* Only use edge interrupts for EISA */
 
-	edge = EISA_READ_8(EISA_INT1_EDGE_LEVEL);
+	edge = inb(EISA_INT1_EDGE_LEVEL);
 	edge &= ~((u8) (1 << irq));
-	EISA_WRITE_8(EISA_INT1_EDGE_LEVEL, edge);
+	outb(edge, EISA_INT1_EDGE_LEVEL);
 
 	enable_eisa1_irq(irq);
 	return 0;
@@ -134,9 +125,9 @@ static void disable_eisa1_irq(unsigned int irq)
 {
 	u8 mask;
 
-	mask = EISA_READ_8(EISA_INT1_MASK);
+	mask = inb(EISA_INT1_MASK);
 	mask |= ((u8) (1 << irq));
-	EISA_WRITE_8(EISA_INT1_MASK, mask);
+	outb(mask, EISA_INT1_MASK);
 }
 
 #define shutdown_eisa1_irq	disable_eisa1_irq
@@ -145,7 +136,7 @@ static void mask_and_ack_eisa1_irq(unsigned int irq)
 {
 	disable_eisa1_irq(irq);
 
-	EISA_WRITE_8(EISA_INT1_CTRL, 0x20);
+	outb(0x20, EISA_INT1_CTRL);
 }
 
 static void end_eisa1_irq(unsigned int irq)
@@ -171,9 +162,9 @@ static void enable_eisa2_irq(unsigned int irq)
 
 	local_irq_save(flags);
 
-	mask = EISA_READ_8(EISA_INT2_MASK);
+	mask = inb(EISA_INT2_MASK);
 	mask &= ~((u8) (1 << (irq - 8)));
-	EISA_WRITE_8(EISA_INT2_MASK, mask);
+	outb(mask, EISA_INT2_MASK);
 
 	local_irq_restore(flags);
 }
@@ -184,9 +175,9 @@ static unsigned int startup_eisa2_irq(unsigned int irq)
 
 	/* Only use edge interrupts for EISA */
 
-	edge = EISA_READ_8(EISA_INT2_EDGE_LEVEL);
+	edge = inb(EISA_INT2_EDGE_LEVEL);
 	edge &= ~((u8) (1 << (irq - 8)));
-	EISA_WRITE_8(EISA_INT2_EDGE_LEVEL, edge);
+	outb(edge, EISA_INT2_EDGE_LEVEL);
 
 	enable_eisa2_irq(irq);
 	return 0;
@@ -196,9 +187,9 @@ static void disable_eisa2_irq(unsigned int irq)
 {
 	u8 mask;
 
-	mask = EISA_READ_8(EISA_INT2_MASK);
+	mask = inb(EISA_INT2_MASK);
 	mask |= ((u8) (1 << (irq - 8)));
-	EISA_WRITE_8(EISA_INT2_MASK, mask);
+	outb(mask, EISA_INT2_MASK);
 }
 
 #define shutdown_eisa2_irq	disable_eisa2_irq
@@ -207,8 +198,7 @@ static void mask_and_ack_eisa2_irq(unsigned int irq)
 {
 	disable_eisa2_irq(irq);
 
-	EISA_WRITE_8(EISA_INT2_CTRL, 0x20);
-	EISA_WRITE_8(EISA_INT1_CTRL, 0x20);
+	outb(0x20, EISA_INT2_CTRL);
 }
 
 static void end_eisa2_irq(unsigned int irq)
@@ -241,7 +231,6 @@ int __init ip22_eisa_init(void)
 {
 	int i, c;
 	char *str;
-	u8 *slot_addr;
 
 	if (!(sgimc->systemid & SGIMC_SYSID_EPRESENT)) {
 		printk(KERN_INFO "EISA: bus not present.\n");
@@ -249,11 +238,8 @@ int __init ip22_eisa_init(void)
 	}
 
 	printk(KERN_INFO "EISA: Probing bus...\n");
-	for (c = 0, i = 1; i <= EISA_MAX_SLOTS; i++) {
-		slot_addr =
-		    (u8 *) EISA_TO_KSEG1((0x1000 * i) +
-					 EISA_VENDOR_ID_OFFSET);
-		if ((str = decode_eisa_sig(slot_addr))) {
+	for (c = 0, i = 1; i <= IP22_EISA_MAX_SLOTS; i++) {
+		if ((str = decode_eisa_sig(0x1000 * i + EISA_VENDOR_ID_OFFSET))) {
 			printk(KERN_INFO "EISA: slot %d : %s detected.\n",
 			       i, str);
 			c++;
@@ -268,25 +254,25 @@ int __init ip22_eisa_init(void)
 	   Please wave your favorite dead chicken over the busses */
 
 	/* First say hello to the EIU */
-	EIU_WRITE_32(EIU_PREMPT_REG, 0x0000FFFF);
-	EIU_WRITE_32(EIU_QUIET_REG, 1);
-	EIU_WRITE_32(EIU_MODE_REG, 0x40f3c07F);
+	outl(0x0000FFFF, EIU_PREMPT_REG);
+	outl(1, EIU_QUIET_REG);
+	outl(0x40f3c07F, EIU_MODE_REG);
 
 	/* Now be nice to the EISA chipset */
-	EISA_WRITE_8(EISA_EXT_NMI_RESET_CTRL, 1);
-	for (i = 0; i < 10000; i++);	/* Wait long enough for the dust to settle */
-	EISA_WRITE_8(EISA_EXT_NMI_RESET_CTRL, 0);
-	EISA_WRITE_8(EISA_INT1_CTRL, 0x11);
-	EISA_WRITE_8(EISA_INT2_CTRL, 0x11);
-	EISA_WRITE_8(EISA_INT1_MASK, 0);
-	EISA_WRITE_8(EISA_INT2_MASK, 8);
-	EISA_WRITE_8(EISA_INT1_MASK, 4);
-	EISA_WRITE_8(EISA_INT2_MASK, 2);
-	EISA_WRITE_8(EISA_INT1_MASK, 1);
-	EISA_WRITE_8(EISA_INT2_MASK, 1);
-	EISA_WRITE_8(EISA_INT1_MASK, 0xfb);
-	EISA_WRITE_8(EISA_INT2_MASK, 0xff);
-	EISA_WRITE_8(EISA_DMA2_WRITE_SINGLE, 0);
+	outb(1, EISA_EXT_NMI_RESET_CTRL);
+	udelay(50);	/* Wait long enough for the dust to settle */
+	outb(0, EISA_EXT_NMI_RESET_CTRL);
+	outb(0x11, EISA_INT1_CTRL);
+	outb(0x11, EISA_INT2_CTRL);
+	outb(0, EISA_INT1_MASK);
+	outb(8, EISA_INT2_MASK);
+	outb(4, EISA_INT1_MASK);
+	outb(2, EISA_INT2_MASK);
+	outb(1, EISA_INT1_MASK);
+	outb(1, EISA_INT2_MASK);
+	outb(0xfb, EISA_INT1_MASK);
+	outb(0xff, EISA_INT2_MASK);
+	outb(0, EISA_DMA2_WRITE_SINGLE);
 
 	for (i = SGINT_EISA; i < (SGINT_EISA + EISA_MAX_IRQ); i++) {
 		irq_desc[i].status = IRQ_DISABLED;
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index 0e96a5d67993..5e59b4c8876b 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -53,7 +53,7 @@ EXPORT_SYMBOL(ip22_do_break);
 extern void ip22_be_init(void) __init;
 extern void ip22_time_init(void) __init;
 
-static int __init ip22_setup(void)
+void __init plat_setup(void)
 {
 	char *ctype;
 
@@ -137,8 +137,4 @@ static int __init ip22_setup(void)
 		}
 	}
 #endif
-
-	return 0;
 }
-
-early_initcall(ip22_setup);
diff --git a/arch/mips/sgi-ip27/Kconfig b/arch/mips/sgi-ip27/Kconfig
new file mode 100644
index 000000000000..7b0bc4437243
--- /dev/null
+++ b/arch/mips/sgi-ip27/Kconfig
@@ -0,0 +1,54 @@
+#config SGI_SN0_XXL
+#	bool "IP27 XXL"
+#	depends on SGI_IP27
+#	  This options adds support for userspace processes upto 16TB size.
+#	  Normally the limit is just .5TB.
+
+config SGI_SN0_N_MODE
+	bool "IP27 N-Mode"
+	depends on SGI_IP27
+	help
+	  The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
+	  configured in either N-Modes which allows for more nodes or M-Mode
+	  which allows for more memory.  Your system is most probably
+	  running in M-Mode, so you should say N here.
+
+config ARCH_DISCONTIGMEM_ENABLE
+	bool
+	default y if SGI_IP27
+	help
+	  Say Y to upport efficient handling of discontiguous physical memory,
+	  for architectures which are either NUMA (Non-Uniform Memory Access)
+	  or have huge holes in the physical address space for other reasons.
+	  See <file:Documentation/vm/numa> for more.
+
+config NUMA
+	bool "NUMA Support"
+	depends on SGI_IP27
+	help
+	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+	  Access).  This option is for configuring high-end multiprocessor
+	  server machines.  If in doubt, say N.
+
+config MAPPED_KERNEL
+	bool "Mapped kernel support"
+	depends on SGI_IP27
+	help
+	  Change the way a Linux kernel is loaded into memory on a MIPS64
+	  machine.  This is required in order to support text replication and
+	  NUMA.  If you need to understand it, read the source code.
+
+config REPLICATE_KTEXT
+	bool "Kernel text replication support"
+	depends on SGI_IP27
+	help
+	  Say Y here to enable replicating the kernel text across multiple
+	  nodes in a NUMA cluster.  This trades memory for speed.
+
+config REPLICATE_EXHANDLERS
+	bool "Exception handler replication support"
+	depends on SGI_IP27
+	help
+	  Say Y here to enable replicating the kernel exception handlers
+	  across multiple nodes in a NUMA cluster. This trades memory for
+	  speed.
diff --git a/arch/mips/sgi-ip27/ip27-berr.c b/arch/mips/sgi-ip27/ip27-berr.c
index e1829a5d3b19..07631a97670b 100644
--- a/arch/mips/sgi-ip27/ip27-berr.c
+++ b/arch/mips/sgi-ip27/ip27-berr.c
@@ -10,6 +10,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/signal.h>	/* for SIGBUS */
 
 #include <asm/module.h>
 #include <asm/sn/addrs.h>
diff --git a/arch/mips/sgi-ip27/ip27-console.c b/arch/mips/sgi-ip27/ip27-console.c
index d97f5b5ef844..3e1ac299b804 100644
--- a/arch/mips/sgi-ip27/ip27-console.c
+++ b/arch/mips/sgi-ip27/ip27-console.c
@@ -30,8 +30,10 @@
 static inline struct ioc3_uartregs *console_uart(void)
 {
 	struct ioc3 *ioc3;
+	nasid_t nasid;
 
-	ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(get_nasid())->memory_base;
+	nasid = (master_nasid == INVALID_NASID) ? get_nasid() : master_nasid;
+	ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(nasid)->memory_base;
 
 	return &ioc3->sregs.uarta;
 }
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 6dcee5c46c74..8651a0e75404 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -56,12 +56,12 @@ static void __init per_hub_init(cnodeid_t cnode)
 {
 	struct hub_data *hub = hub_data(cnode);
 	nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode);
+	int i;
 
 	cpu_set(smp_processor_id(), hub->h_cpus);
 
 	if (test_and_set_bit(cnode, hub_init_mask))
 		return;
-
 	/*
 	 * Set CRB timeout at 5ms, (< PI timeout of 10ms)
 	 */
@@ -88,6 +88,24 @@ static void __init per_hub_init(cnodeid_t cnode)
 		__flush_cache_all();
 	}
 #endif
+
+	/*
+	 * Some interrupts are reserved by hardware or by software convention.
+	 * Mark these as reserved right away so they won't be used accidently
+	 * later.
+	 */
+	for (i = 0; i <= BASE_PCI_IRQ; i++) {
+		__set_bit(i, hub->irq_alloc_mask);
+		LOCAL_HUB_CLR_INTR(INT_PEND0_BASELVL + i);
+	}
+
+	__set_bit(IP_PEND0_6_63, hub->irq_alloc_mask);
+	LOCAL_HUB_S(PI_INT_PEND_MOD, IP_PEND0_6_63);
+
+	for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++) {
+		__set_bit(i, hub->irq_alloc_mask);
+		LOCAL_HUB_CLR_INTR(INT_PEND1_BASELVL + i);
+	}
 }
 
 void __init per_cpu_init(void)
@@ -104,30 +122,12 @@ void __init per_cpu_init(void)
 
 	clear_c0_status(ST0_IM);
 
+	per_hub_init(cnode);
+
 	for (i = 0; i < LEVELS_PER_SLICE; i++)
 		si->level_to_irq[i] = -1;
 
 	/*
-	 * Some interrupts are reserved by hardware or by software convention.
-	 * Mark these as reserved right away so they won't be used accidently
-	 * later.
-	 */
-	for (i = 0; i <= BASE_PCI_IRQ; i++) {
-		__set_bit(i, si->irq_alloc_mask);
-		LOCAL_HUB_S(PI_INT_PEND_MOD, i);
-	}
-
-	__set_bit(IP_PEND0_6_63, si->irq_alloc_mask);
-	LOCAL_HUB_S(PI_INT_PEND_MOD, IP_PEND0_6_63);
-
-	for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++) {
-		__set_bit(i, si->irq_alloc_mask + 1);
-		LOCAL_HUB_S(PI_INT_PEND_MOD, i);
-	}
-
-	LOCAL_HUB_L(PI_INT_PEND0);
-
-	/*
 	 * We use this so we can find the local hub's data as fast as only
 	 * possible.
 	 */
@@ -140,8 +140,6 @@ void __init per_cpu_init(void)
 	install_cpu_nmi_handler(cputoslice(cpu));
 
 	set_c0_status(SRB_DEV0 | SRB_DEV1);
-
-	per_hub_init(cnode);
 }
 
 /*
@@ -198,7 +196,7 @@ extern void ip27_setup_console(void);
 extern void ip27_time_init(void);
 extern void ip27_reboot_setup(void);
 
-static int __init ip27_setup(void)
+void __init plat_setup(void)
 {
 	hubreg_t p, e, n_mode;
 	nasid_t nid;
@@ -245,8 +243,4 @@ static int __init ip27_setup(void)
 	set_io_port_base(IO_BASE);
 
 	board_time_init = ip27_time_init;
-
-	return 0;
 }
-
-early_initcall(ip27_setup);
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index 61817a18aed2..73e5e52781d8 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -5,6 +5,9 @@
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  * Copyright (C) 1999 - 2001 Kanoj Sarcar
  */
+
+#undef DEBUG
+
 #include <linux/config.h>
 #include <linux/init.h>
 #include <linux/irq.h>
@@ -14,11 +17,11 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-#include <linux/irq.h>
 #include <linux/timex.h>
 #include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/smp_lock.h>
+#include <linux/kernel.h>
 #include <linux/kernel_stat.h>
 #include <linux/delay.h>
 #include <linux/bitops.h>
@@ -37,13 +40,6 @@
 #include <asm/sn/hub.h>
 #include <asm/sn/intr.h>
 
-#undef DEBUG_IRQ
-#ifdef DEBUG_IRQ
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
 /*
  * Linux has a controller-independent x86 interrupt architecture.
  * every controller has a 'controller-template', that is used
@@ -74,14 +70,15 @@ extern int irq_to_slot[];
 
 static inline int alloc_level(int cpu, int irq)
 {
+	struct hub_data *hub = hub_data(cpu_to_node(cpu));
 	struct slice_data *si = cpu_data[cpu].data;
-	int level;				/* pre-allocated entries */
+	int level;
 
-	level = find_first_zero_bit(si->irq_alloc_mask, LEVELS_PER_SLICE);
+	level = find_first_zero_bit(hub->irq_alloc_mask, LEVELS_PER_SLICE);
 	if (level >= LEVELS_PER_SLICE)
 		panic("Cpu %d flooded with devices\n", cpu);
 
-	__set_bit(level, si->irq_alloc_mask);
+	__set_bit(level, hub->irq_alloc_mask);
 	si->level_to_irq[level] = irq;
 
 	return level;
@@ -216,9 +213,11 @@ static int intr_connect_level(int cpu, int bit)
 {
 	nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
 	struct slice_data *si = cpu_data[cpu].data;
+	unsigned long flags;
 
-	__set_bit(bit, si->irq_enable_mask);
+	set_bit(bit, si->irq_enable_mask);
 
+	local_irq_save(flags);
 	if (!cputoslice(cpu)) {
 		REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
 		REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
@@ -226,6 +225,7 @@ static int intr_connect_level(int cpu, int bit)
 		REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
 		REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
 	}
+	local_irq_restore(flags);
 
 	return 0;
 }
@@ -235,7 +235,7 @@ static int intr_disconnect_level(int cpu, int bit)
 	nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
 	struct slice_data *si = cpu_data[cpu].data;
 
-	__clear_bit(bit, si->irq_enable_mask);
+	clear_bit(bit, si->irq_enable_mask);
 
 	if (!cputoslice(cpu)) {
 		REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
@@ -261,7 +261,7 @@ static unsigned int startup_bridge_irq(unsigned int irq)
 	bc = IRQ_TO_BRIDGE(irq);
 	bridge = bc->base;
 
-	DBG("bridge_startup(): irq= 0x%x  pin=%d\n", irq, pin);
+	pr_debug("bridge_startup(): irq= 0x%x  pin=%d\n", irq, pin);
 	/*
 	 * "map" irq to a swlevel greater than 6 since the first 6 bits
 	 * of INT_PEND0 are taken
@@ -298,12 +298,13 @@ static unsigned int startup_bridge_irq(unsigned int irq)
 static void shutdown_bridge_irq(unsigned int irq)
 {
 	struct bridge_controller *bc = IRQ_TO_BRIDGE(irq);
+	struct hub_data *hub = hub_data(cpu_to_node(bc->irq_cpu));
 	bridge_t *bridge = bc->base;
 	struct slice_data *si = cpu_data[bc->irq_cpu].data;
 	int pin, swlevel;
 	cpuid_t cpu;
 
-	DBG("bridge_shutdown: irq 0x%x\n", irq);
+	pr_debug("bridge_shutdown: irq 0x%x\n", irq);
 	pin = SLOT_FROM_PCI_IRQ(irq);
 
 	/*
@@ -313,7 +314,7 @@ static void shutdown_bridge_irq(unsigned int irq)
 	swlevel = find_level(&cpu, irq);
 	intr_disconnect_level(cpu, swlevel);
 
-	__clear_bit(swlevel, si->irq_alloc_mask);
+	__clear_bit(swlevel, hub->irq_alloc_mask);
 	si->level_to_irq[swlevel] = -1;
 
 	bridge->b_int_enable &= ~(1 << pin);
@@ -433,25 +434,24 @@ void install_ipi(void)
 	int slice = LOCAL_HUB_L(PI_CPU_NUM);
 	int cpu = smp_processor_id();
 	struct slice_data *si = cpu_data[cpu].data;
-	hubreg_t mask, set;
+	struct hub_data *hub = hub_data(cpu_to_node(cpu));
+	int resched, call;
+
+	resched = CPU_RESCHED_A_IRQ + slice;
+	__set_bit(resched, hub->irq_alloc_mask);
+	__set_bit(resched, si->irq_enable_mask);
+	LOCAL_HUB_CLR_INTR(resched);
+
+	call = CPU_CALL_A_IRQ + slice;
+	__set_bit(call, hub->irq_alloc_mask);
+	__set_bit(call, si->irq_enable_mask);
+	LOCAL_HUB_CLR_INTR(call);
 
 	if (slice == 0) {
-		LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ);
-		LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ);
-		mask = LOCAL_HUB_L(PI_INT_MASK0_A);	/* Slice A */
-		set = (1UL << CPU_RESCHED_A_IRQ) | (1UL << CPU_CALL_A_IRQ);
-		mask |= set;
-		si->irq_enable_mask[0] |= set;
-		si->irq_alloc_mask[0] |= set;
-		LOCAL_HUB_S(PI_INT_MASK0_A, mask);
+		LOCAL_HUB_S(PI_INT_MASK0_A, si->irq_enable_mask[0]);
+		LOCAL_HUB_S(PI_INT_MASK1_A, si->irq_enable_mask[1]);
 	} else {
-		LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ);
-		LOCAL_HUB_CLR_INTR(CPU_CALL_B_IRQ);
-		mask = LOCAL_HUB_L(PI_INT_MASK0_B);	/* Slice B */
-		set = (1UL << CPU_RESCHED_B_IRQ) | (1UL << CPU_CALL_B_IRQ);
-		mask |= set;
-		si->irq_enable_mask[1] |= set;
-		si->irq_alloc_mask[1] |= set;
-		LOCAL_HUB_S(PI_INT_MASK0_B, mask);
+		LOCAL_HUB_S(PI_INT_MASK0_B, si->irq_enable_mask[0]);
+		LOCAL_HUB_S(PI_INT_MASK1_B, si->irq_enable_mask[1]);
 	}
 }
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index 17f768cba94f..3a8291b7d26d 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -127,37 +127,28 @@ void cpu_node_probe(void)
 	printk("Discovered %d cpus on %d nodes\n", highest + 1, num_online_nodes());
 }
 
-static void intr_clear_bits(nasid_t nasid, volatile hubreg_t *pend,
-	int base_level)
+static __init void intr_clear_all(nasid_t nasid)
 {
-	volatile hubreg_t bits;
 	int i;
 
-	/* Check pending interrupts */
-	if ((bits = HUB_L(pend)) != 0)
-		for (i = 0; i < N_INTPEND_BITS; i++)
-			if (bits & (1 << i))
-				LOCAL_HUB_CLR_INTR(base_level + i);
-}
-
-static void intr_clear_all(nasid_t nasid)
-{
 	REMOTE_HUB_S(nasid, PI_INT_MASK0_A, 0);
 	REMOTE_HUB_S(nasid, PI_INT_MASK0_B, 0);
 	REMOTE_HUB_S(nasid, PI_INT_MASK1_A, 0);
 	REMOTE_HUB_S(nasid, PI_INT_MASK1_B, 0);
-	intr_clear_bits(nasid, REMOTE_HUB_ADDR(nasid, PI_INT_PEND0),
-	                INT_PEND0_BASELVL);
-	intr_clear_bits(nasid, REMOTE_HUB_ADDR(nasid, PI_INT_PEND1),
-	                INT_PEND1_BASELVL);
+
+	for (i = 0; i < 128; i++)
+		REMOTE_HUB_CLR_INTR(nasid, i);
 }
 
 void __init prom_prepare_cpus(unsigned int max_cpus)
 {
 	cnodeid_t	cnode;
 
-	for_each_online_node(cnode)
+	for_each_online_node(cnode) {
+		if (cnode == 0)
+			continue;
 		intr_clear_all(COMPACT_TO_NASID_NODEID(cnode));
+	}
 
 	replicate_kernel_text();
 
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index fc3a8e90d763..2eb22d692ed9 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -163,14 +163,13 @@ static void end_cpu_irq(unsigned int irq)
 #define mask_and_ack_cpu_irq disable_cpu_irq
 
 static struct hw_interrupt_type ip32_cpu_interrupt = {
-	"IP32 CPU",
-	startup_cpu_irq,
-	shutdown_cpu_irq,
-	enable_cpu_irq,
-	disable_cpu_irq,
-	mask_and_ack_cpu_irq,
-	end_cpu_irq,
-	NULL
+	.typename = "IP32 CPU",
+	.startup = startup_cpu_irq,
+	.shutdown = shutdown_cpu_irq,
+	.enable = enable_cpu_irq,
+	.disable = disable_cpu_irq,
+	.ack = mask_and_ack_cpu_irq,
+	.end = end_cpu_irq,
 };
 
 /*
@@ -234,14 +233,13 @@ static void end_crime_irq(unsigned int irq)
 #define shutdown_crime_irq disable_crime_irq
 
 static struct hw_interrupt_type ip32_crime_interrupt = {
-	"IP32 CRIME",
-	startup_crime_irq,
-	shutdown_crime_irq,
-	enable_crime_irq,
-	disable_crime_irq,
-	mask_and_ack_crime_irq,
-	end_crime_irq,
-	NULL
+	.typename = "IP32 CRIME",
+	.startup = startup_crime_irq,
+	.shutdown = shutdown_crime_irq,
+	.enable = enable_crime_irq,
+	.disable = disable_crime_irq,
+	.ack = mask_and_ack_crime_irq,
+	.end = end_crime_irq,
 };
 
 /*
@@ -294,14 +292,13 @@ static void end_macepci_irq(unsigned int irq)
 #define mask_and_ack_macepci_irq disable_macepci_irq
 
 static struct hw_interrupt_type ip32_macepci_interrupt = {
-	"IP32 MACE PCI",
-	startup_macepci_irq,
-	shutdown_macepci_irq,
-	enable_macepci_irq,
-	disable_macepci_irq,
-	mask_and_ack_macepci_irq,
-	end_macepci_irq,
-	NULL
+	.typename = "IP32 MACE PCI",
+	.startup = startup_macepci_irq,
+	.shutdown = shutdown_macepci_irq,
+	.enable = enable_macepci_irq,
+	.disable = disable_macepci_irq,
+	.ack = mask_and_ack_macepci_irq,
+	.end = end_macepci_irq,
 };
 
 /* This is used for MACE ISA interrupts.  That means bits 4-6 in the
@@ -425,14 +422,13 @@ static void end_maceisa_irq(unsigned irq)
 #define shutdown_maceisa_irq disable_maceisa_irq
 
 static struct hw_interrupt_type ip32_maceisa_interrupt = {
-	"IP32 MACE ISA",
-	startup_maceisa_irq,
-	shutdown_maceisa_irq,
-	enable_maceisa_irq,
-	disable_maceisa_irq,
-	mask_and_ack_maceisa_irq,
-	end_maceisa_irq,
-	NULL
+	.typename = "IP32 MACE ISA",
+	.startup = startup_maceisa_irq,
+	.shutdown = shutdown_maceisa_irq,
+	.enable = enable_maceisa_irq,
+	.disable = disable_maceisa_irq,
+	.ack = mask_and_ack_maceisa_irq,
+	.end = end_maceisa_irq,
 };
 
 /* This is used for regular non-ISA, non-PCI MACE interrupts.  That means
@@ -476,14 +472,13 @@ static void end_mace_irq(unsigned int irq)
 #define mask_and_ack_mace_irq disable_mace_irq
 
 static struct hw_interrupt_type ip32_mace_interrupt = {
-	"IP32 MACE",
-	startup_mace_irq,
-	shutdown_mace_irq,
-	enable_mace_irq,
-	disable_mace_irq,
-	mask_and_ack_mace_irq,
-	end_mace_irq,
-	NULL
+	.typename = "IP32 MACE",
+	.startup = startup_mace_irq,
+	.shutdown = shutdown_mace_irq,
+	.enable = enable_mace_irq,
+	.disable = disable_mace_irq,
+	.ack = mask_and_ack_mace_irq,
+	.end = end_mace_irq,
 };
 
 static void ip32_unknown_interrupt(struct pt_regs *regs)
diff --git a/arch/mips/sgi-ip32/ip32-memory.c b/arch/mips/sgi-ip32/ip32-memory.c
index fc76ca92bab9..d37d40a3cdae 100644
--- a/arch/mips/sgi-ip32/ip32-memory.c
+++ b/arch/mips/sgi-ip32/ip32-memory.c
@@ -36,8 +36,8 @@ void __init prom_meminit (void)
 		if (base + size > (256 << 20))
 			base += CRIME_HI_MEM_BASE;
 
-		printk("CRIME MC: bank %u base 0x%016lx size %luMB\n",
-			bank, base, size);
+		printk("CRIME MC: bank %u base 0x%016lx size %luMiB\n",
+			bank, base, size >> 20);
 		add_memory_region (base, size, BOOT_MEM_RAM);
 	}
 }
diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
index 8d270be58224..d10a269aeae1 100644
--- a/arch/mips/sgi-ip32/ip32-setup.c
+++ b/arch/mips/sgi-ip32/ip32-setup.c
@@ -92,7 +92,7 @@ void __init ip32_timer_setup(struct irqaction *irq)
 	setup_irq(IP32_R4K_TIMER_IRQ, irq);
 }
 
-static int __init ip32_setup(void)
+void __init plat_setup(void)
 {
 	board_be_init = ip32_be_init;
 
@@ -152,8 +152,4 @@ static int __init ip32_setup(void)
 		}
 	}
 #endif
-
-	return 0;
 }
-
-early_initcall(ip32_setup);
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
new file mode 100644
index 000000000000..de46f62ac462
--- /dev/null
+++ b/arch/mips/sibyte/Kconfig
@@ -0,0 +1,161 @@
+config SIBYTE_SB1250
+	bool
+	select HW_HAS_PCI
+	select SIBYTE_HAS_LDT
+	select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1120
+	bool
+	select SIBYTE_BCM112X
+	select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1125
+	bool
+	select HW_HAS_PCI
+	select SIBYTE_BCM112X
+	select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1125H
+	bool
+	select HW_HAS_PCI
+	select SIBYTE_BCM112X
+	select SIBYTE_HAS_LDT
+	select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM112X
+	bool
+	select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1x80
+	bool
+	select HW_HAS_PCI
+	select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1x55
+	bool
+	select HW_HAS_PCI
+	select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_SB1xxx_SOC
+	bool
+	depends on EXPERIMENTAL
+	select DMA_COHERENT
+	select SIBYTE_CFE
+	select SWAP_IO_SPACE
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+
+choice
+	prompt "SiByte SOC Stepping"
+	depends on SIBYTE_SB1xxx_SOC
+
+config CPU_SB1_PASS_1
+	bool "1250 Pass1"
+	depends on SIBYTE_SB1250
+	select CPU_HAS_PREFETCH
+
+config CPU_SB1_PASS_2_1250
+	bool "1250 An"
+	depends on SIBYTE_SB1250
+	select CPU_SB1_PASS_2
+	help
+	  Also called BCM1250 Pass 2
+
+config CPU_SB1_PASS_2_2
+	bool "1250 Bn"
+	depends on SIBYTE_SB1250
+	select CPU_HAS_PREFETCH
+	help
+	  Also called BCM1250 Pass 2.2
+
+config CPU_SB1_PASS_4
+	bool "1250 Cn"
+	depends on SIBYTE_SB1250
+	select CPU_HAS_PREFETCH
+	help
+	  Also called BCM1250 Pass 3
+
+config CPU_SB1_PASS_2_112x
+	bool "112x Hybrid"
+	depends on SIBYTE_BCM112X
+	select CPU_SB1_PASS_2
+
+config CPU_SB1_PASS_3
+	bool "112x An"
+	depends on SIBYTE_BCM112X
+	select CPU_HAS_PREFETCH
+
+endchoice
+
+config CPU_SB1_PASS_2
+	bool
+
+config SIBYTE_HAS_LDT
+	bool
+	depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
+	default y
+
+config SIMULATION
+	bool "Running under simulation"
+	depends on SIBYTE_SB1xxx_SOC
+	help
+	  Build a kernel suitable for running under the GDB simulator.
+	  Primarily adjusts the kernel's notion of time.
+
+config CONFIG_SB1_CEX_ALWAYS_FATAL
+	bool "All cache exceptions considered fatal (no recovery attempted)"
+	depends on SIBYTE_SB1xxx_SOC
+
+config CONFIG_SB1_CERR_STALL
+	bool "Stall (rather than panic) on fatal cache error"
+	depends on SIBYTE_SB1xxx_SOC
+
+config SIBYTE_CFE
+	bool "Booting from CFE"
+	depends on SIBYTE_SB1xxx_SOC
+	help
+	  Make use of the CFE API for enumerating available memory,
+	  controlling secondary CPUs, and possibly console output.
+
+config SIBYTE_CFE_CONSOLE
+	bool "Use firmware console"
+	depends on SIBYTE_CFE
+	help
+	  Use the CFE API's console write routines during boot.  Other console
+	  options (VT console, sb1250 duart console, etc.) should not be
+	  configured.
+
+config SIBYTE_STANDALONE
+	bool
+	depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
+	default y
+
+config SIBYTE_STANDALONE_RAM_SIZE
+	int "Memory size (in megabytes)"
+	depends on SIBYTE_STANDALONE
+	default "32"
+
+config SIBYTE_BUS_WATCHER
+	bool "Support for Bus Watcher statistics"
+	depends on SIBYTE_SB1xxx_SOC
+	help
+	  Handle and keep statistics on the bus error interrupts (COR_ECC,
+	  BAD_ECC, IO_BUS).
+
+config SIBYTE_BW_TRACE
+	bool "Capture bus trace before bus error"
+	depends on SIBYTE_BUS_WATCHER
+	help
+	  Run a continuous bus trace, dumping the raw data as soon as
+	  a ZBbus error is detected.  Cannot work if ZBbus profiling
+	  is turned on, and also will interfere with JTAG-based trace
+	  buffer activity.  Raw buffer data is dumped to console, and
+	  must be processed off-line.
+
+config SIBYTE_SB1250_PROF
+	bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
+	depends on SIBYTE_SB1xxx_SOC
+
+config SIBYTE_TBPROF
+	bool "Support for ZBbus profiling"
+	depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/sibyte/bcm1480/Makefile b/arch/mips/sibyte/bcm1480/Makefile
new file mode 100644
index 000000000000..538d5a51ae94
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/Makefile
@@ -0,0 +1,5 @@
+obj-y := setup.o irq.o irq_handler.o time.o
+
+obj-$(CONFIG_SMP)			+= smp.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
new file mode 100644
index 000000000000..b2a1ba5d23df
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -0,0 +1,476 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/errno.h>
+#include <asm/signal.h>
+#include <asm/system.h>
+#include <asm/ptrace.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250_uart.h>
+#include <asm/sibyte/sb1250.h>
+
+/*
+ * These are the routines that handle all the low level interrupt stuff.
+ * Actions handled here are: initialization of the interrupt map, requesting of
+ * interrupt lines by handlers, dispatching if interrupts to handlers, probing
+ * for interrupt lines
+ */
+
+
+#define shutdown_bcm1480_irq	disable_bcm1480_irq
+static void end_bcm1480_irq(unsigned int irq);
+static void enable_bcm1480_irq(unsigned int irq);
+static void disable_bcm1480_irq(unsigned int irq);
+static unsigned int startup_bcm1480_irq(unsigned int irq);
+static void ack_bcm1480_irq(unsigned int irq);
+#ifdef CONFIG_SMP
+static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask);
+#endif
+
+#ifdef CONFIG_PCI
+extern unsigned long ht_eoi_space;
+#endif
+
+#ifdef CONFIG_KGDB
+#include <asm/gdb-stub.h>
+extern void breakpoint(void);
+static int kgdb_irq;
+#ifdef CONFIG_GDB_CONSOLE
+extern void register_gdb_console(void);
+#endif
+
+/* kgdb is on when configured.  Pass "nokgdb" kernel arg to turn it off */
+static int kgdb_flag = 1;
+static int __init nokgdb(char *str)
+{
+	kgdb_flag = 0;
+	return 1;
+}
+__setup("nokgdb", nokgdb);
+
+/* Default to UART1 */
+int kgdb_port = 1;
+#ifdef CONFIG_SIBYTE_SB1250_DUART
+extern char sb1250_duart_present[];
+#endif
+#endif
+
+static struct hw_interrupt_type bcm1480_irq_type = {
+	.typename = "BCM1480-IMR",
+	.startup = startup_bcm1480_irq,
+	.shutdown = shutdown_bcm1480_irq,
+	.enable = enable_bcm1480_irq,
+	.disable = disable_bcm1480_irq,
+	.ack = ack_bcm1480_irq,
+	.end = end_bcm1480_irq,
+#ifdef CONFIG_SMP
+	.set_affinity = bcm1480_set_affinity
+#endif
+};
+
+/* Store the CPU id (not the logical number) */
+int bcm1480_irq_owner[BCM1480_NR_IRQS];
+
+DEFINE_SPINLOCK(bcm1480_imr_lock);
+
+void bcm1480_mask_irq(int cpu, int irq)
+{
+	unsigned long flags;
+	u64 cur_ints,hl_spacing;
+
+	spin_lock_irqsave(&bcm1480_imr_lock, flags);
+	hl_spacing = 0;
+	if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
+		hl_spacing = BCM1480_IMR_HL_SPACING;
+		irq -= BCM1480_NR_IRQS_HALF;
+	}
+	cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+	cur_ints |= (((u64) 1) << irq);
+	____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+	spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+}
+
+void bcm1480_unmask_irq(int cpu, int irq)
+{
+	unsigned long flags;
+	u64 cur_ints,hl_spacing;
+
+	spin_lock_irqsave(&bcm1480_imr_lock, flags);
+	hl_spacing = 0;
+	if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
+		hl_spacing = BCM1480_IMR_HL_SPACING;
+		irq -= BCM1480_NR_IRQS_HALF;
+	}
+	cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+	cur_ints &= ~(((u64) 1) << irq);
+	____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+	spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+}
+
+#ifdef CONFIG_SMP
+static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask)
+{
+	int i = 0, old_cpu, cpu, int_on;
+	u64 cur_ints;
+	irq_desc_t *desc = irq_desc + irq;
+	unsigned long flags;
+	unsigned int irq_dirty;
+
+	i = first_cpu(mask);
+	if (next_cpu(i, mask) <= NR_CPUS) {
+		printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
+		return;
+	}
+
+	/* Convert logical CPU to physical CPU */
+	cpu = cpu_logical_map(i);
+
+	/* Protect against other affinity changers and IMR manipulation */
+	spin_lock_irqsave(&desc->lock, flags);
+	spin_lock(&bcm1480_imr_lock);
+
+	/* Swizzle each CPU's IMR (but leave the IP selection alone) */
+	old_cpu = bcm1480_irq_owner[irq];
+	irq_dirty = irq;
+	if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
+		irq_dirty -= BCM1480_NR_IRQS_HALF;
+	}
+
+	int k;
+	for (k=0; k<2; k++) { /* Loop through high and low interrupt mask register */
+		cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+		int_on = !(cur_ints & (((u64) 1) << irq_dirty));
+		if (int_on) {
+			/* If it was on, mask it */
+			cur_ints |= (((u64) 1) << irq_dirty);
+			____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+		}
+		bcm1480_irq_owner[irq] = cpu;
+		if (int_on) {
+			/* unmask for the new CPU */
+			cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+			cur_ints &= ~(((u64) 1) << irq_dirty);
+			____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+		}
+	}
+	spin_unlock(&bcm1480_imr_lock);
+	spin_unlock_irqrestore(&desc->lock, flags);
+}
+#endif
+
+
+/* Defined in arch/mips/sibyte/bcm1480/irq_handler.S */
+extern void bcm1480_irq_handler(void);
+
+/*****************************************************************************/
+
+static unsigned int startup_bcm1480_irq(unsigned int irq)
+{
+	bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
+
+	return 0;		/* never anything pending */
+}
+
+
+static void disable_bcm1480_irq(unsigned int irq)
+{
+	bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
+}
+
+static void enable_bcm1480_irq(unsigned int irq)
+{
+	bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
+}
+
+
+static void ack_bcm1480_irq(unsigned int irq)
+{
+	u64 pending;
+	unsigned int irq_dirty;
+
+	/*
+	 * If the interrupt was an HT interrupt, now is the time to
+	 * clear it.  NOTE: we assume the HT bridge was set up to
+	 * deliver the interrupts to all CPUs (which makes affinity
+	 * changing easier for us)
+	 */
+	irq_dirty = irq;
+	if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
+		irq_dirty -= BCM1480_NR_IRQS_HALF;
+	}
+	int k;
+	for (k=0; k<2; k++) { /* Loop through high and low LDT interrupts */
+		pending = __raw_readq(IOADDR(A_BCM1480_IMR_REGISTER(bcm1480_irq_owner[irq],
+						R_BCM1480_IMR_LDT_INTERRUPT_H + (k*BCM1480_IMR_HL_SPACING))));
+		pending &= ((u64)1 << (irq_dirty));
+		if (pending) {
+#ifdef CONFIG_SMP
+			int i;
+			for (i=0; i<NR_CPUS; i++) {
+				/*
+				 * Clear for all CPUs so an affinity switch
+				 * doesn't find an old status
+				 */
+				__raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(cpu_logical_map(i),
+								R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
+			}
+#else
+			__raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
+#endif
+
+			/*
+			 * Generate EOI.  For Pass 1 parts, EOI is a nop.  For
+			 * Pass 2, the LDT world may be edge-triggered, but
+			 * this EOI shouldn't hurt.  If they are
+			 * level-sensitive, the EOI is required.
+			 */
+#ifdef CONFIG_PCI
+			if (ht_eoi_space)
+				*(uint32_t *)(ht_eoi_space+(irq<<16)+(7<<2)) = 0;
+#endif
+		}
+	}
+	bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
+}
+
+
+static void end_bcm1480_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+		bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
+	}
+}
+
+
+void __init init_bcm1480_irqs(void)
+{
+	int i;
+
+	for (i = 0; i < NR_IRQS; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = 0;
+		irq_desc[i].depth = 1;
+		if (i < BCM1480_NR_IRQS) {
+			irq_desc[i].handler = &bcm1480_irq_type;
+			bcm1480_irq_owner[i] = 0;
+		} else {
+			irq_desc[i].handler = &no_irq_type;
+		}
+	}
+}
+
+
+static irqreturn_t bcm1480_dummy_handler(int irq, void *dev_id,
+	struct pt_regs *regs)
+{
+	return IRQ_NONE;
+}
+
+static struct irqaction bcm1480_dummy_action = {
+	.handler = bcm1480_dummy_handler,
+	.flags   = 0,
+	.mask    = CPU_MASK_NONE,
+	.name    = "bcm1480-private",
+	.next    = NULL,
+	.dev_id  = 0
+};
+
+int bcm1480_steal_irq(int irq)
+{
+	irq_desc_t *desc = irq_desc + irq;
+	unsigned long flags;
+	int retval = 0;
+
+	if (irq >= BCM1480_NR_IRQS)
+		return -EINVAL;
+
+	spin_lock_irqsave(&desc->lock,flags);
+	/* Don't allow sharing at all for these */
+	if (desc->action != NULL)
+		retval = -EBUSY;
+	else {
+		desc->action = &bcm1480_dummy_action;
+		desc->depth = 0;
+	}
+	spin_unlock_irqrestore(&desc->lock,flags);
+	return 0;
+}
+
+/*
+ *  init_IRQ is called early in the boot sequence from init/main.c.  It
+ *  is responsible for setting up the interrupt mapper and installing the
+ *  handler that will be responsible for dispatching interrupts to the
+ *  "right" place.
+ */
+/*
+ * For now, map all interrupts to IP[2].  We could save
+ * some cycles by parceling out system interrupts to different
+ * IP lines, but keep it simple for bringup.  We'll also direct
+ * all interrupts to a single CPU; we should probably route
+ * PCI and LDT to one cpu and everything else to the other
+ * to balance the load a bit.
+ *
+ * On the second cpu, everything is set to IP5, which is
+ * ignored, EXCEPT the mailbox interrupt.  That one is
+ * set to IP[2] so it is handled.  This is needed so we
+ * can do cross-cpu function calls, as requred by SMP
+ */
+
+#define IMR_IP2_VAL	K_BCM1480_INT_MAP_I0
+#define IMR_IP3_VAL	K_BCM1480_INT_MAP_I1
+#define IMR_IP4_VAL	K_BCM1480_INT_MAP_I2
+#define IMR_IP5_VAL	K_BCM1480_INT_MAP_I3
+#define IMR_IP6_VAL	K_BCM1480_INT_MAP_I4
+
+void __init arch_init_irq(void)
+{
+
+	unsigned int i, cpu;
+	u64 tmp;
+	unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
+		STATUSF_IP1 | STATUSF_IP0;
+
+	/* Default everything to IP2 */
+	/* Start with _high registers which has no bit 0 interrupt source */
+	for (i = 1; i < BCM1480_NR_IRQS_HALF; i++) {	/* was I0 */
+		for (cpu = 0; cpu < 4; cpu++) {
+			__raw_writeq(IMR_IP2_VAL,
+				     IOADDR(A_BCM1480_IMR_REGISTER(cpu,
+								   R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (i << 3)));
+		}
+	}
+
+	/* Now do _low registers */
+	for (i = 0; i < BCM1480_NR_IRQS_HALF; i++) {
+		for (cpu = 0; cpu < 4; cpu++) {
+			__raw_writeq(IMR_IP2_VAL,
+				     IOADDR(A_BCM1480_IMR_REGISTER(cpu,
+								   R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) + (i << 3)));
+		}
+	}
+
+	init_bcm1480_irqs();
+
+	/*
+	 * Map the high 16 bits of mailbox_0 registers to IP[3], for
+	 * inter-cpu messages
+	 */
+	/* Was I1 */
+	for (cpu = 0; cpu < 4; cpu++) {
+		__raw_writeq(IMR_IP3_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
+						 (K_BCM1480_INT_MBOX_0_0 << 3)));
+        }
+
+
+	/* Clear the mailboxes.  The firmware may leave them dirty */
+	for (cpu = 0; cpu < 4; cpu++) {
+		__raw_writeq(0xffffffffffffffffULL,
+			     IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_0_CLR_CPU)));
+		__raw_writeq(0xffffffffffffffffULL,
+			     IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_1_CLR_CPU)));
+	}
+
+
+	/* Mask everything except the high 16 bit of mailbox_0 registers for all cpus */
+	tmp = ~((u64) 0) ^ ( (((u64) 1) << K_BCM1480_INT_MBOX_0_0));
+	for (cpu = 0; cpu < 4; cpu++) {
+		__raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_H)));
+	}
+	tmp = ~((u64) 0);
+	for (cpu = 0; cpu < 4; cpu++) {
+		__raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_L)));
+	}
+
+	bcm1480_steal_irq(K_BCM1480_INT_MBOX_0_0);
+
+	/*
+	 * Note that the timer interrupts are also mapped, but this is
+	 * done in bcm1480_time_init().  Also, the profiling driver
+	 * does its own management of IP7.
+	 */
+
+#ifdef CONFIG_KGDB
+	imask |= STATUSF_IP6;
+#endif
+	/* Enable necessary IPs, disable the rest */
+	change_c0_status(ST0_IM, imask);
+	set_except_vector(0, bcm1480_irq_handler);
+
+#ifdef CONFIG_KGDB
+	if (kgdb_flag) {
+		kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
+
+#ifdef CONFIG_SIBYTE_SB1250_DUART
+		sb1250_duart_present[kgdb_port] = 0;
+#endif
+		/* Setup uart 1 settings, mapper */
+		/* QQQ FIXME */
+		__raw_writeq(M_DUART_IMR_BRK, IO_SPACE_BASE + A_DUART_IMRREG(kgdb_port));
+
+		bcm1480_steal_irq(kgdb_irq);
+		__raw_writeq(IMR_IP6_VAL,
+			     IO_SPACE_BASE + A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
+			     (kgdb_irq<<3));
+		bcm1480_unmask_irq(0, kgdb_irq);
+
+#ifdef CONFIG_GDB_CONSOLE
+		register_gdb_console();
+#endif
+		prom_printf("Waiting for GDB on UART port %d\n", kgdb_port);
+		set_debug_traps();
+		breakpoint();
+	}
+#endif
+}
+
+#ifdef CONFIG_KGDB
+
+#include <linux/delay.h>
+
+#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
+#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
+
+void bcm1480_kgdb_interrupt(struct pt_regs *regs)
+{
+	/*
+	 * Clear break-change status (allow some time for the remote
+	 * host to stop the break, since we would see another
+	 * interrupt on the end-of-break too)
+	 */
+	kstat.irqs[smp_processor_id()][kgdb_irq]++;
+	mdelay(500);
+	duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
+				M_DUART_RX_EN | M_DUART_TX_EN);
+	set_async_breakpoint(&regs->cp0_epc);
+}
+
+#endif 	/* CONFIG_KGDB */
diff --git a/arch/mips/sibyte/bcm1480/irq_handler.S b/arch/mips/sibyte/bcm1480/irq_handler.S
new file mode 100644
index 000000000000..408db88d050f
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/irq_handler.S
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ * bcm1480_irq_handler() is the routine that is actually called when an
+ * interrupt occurs.  It is installed as the exception vector handler in
+ * init_IRQ() in arch/mips/sibyte/bcm1480/irq.c
+ *
+ * In the handle we figure out which interrupts need handling, and use that
+ * to call the dispatcher, which will take care of actually calling
+ * registered handlers
+ *
+ * Note that we take care of all raised interrupts in one go at the handler.
+ * This is more BSDish than the Indy code, and also, IMHO, more sane.
+ */
+#include <linux/config.h>
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/sibyte/sb1250_defs.h>
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+
+/*
+ * What a pain. We have to be really careful saving the upper 32 bits of any
+ * register across function calls if we don't want them trashed--since were
+ * running in -o32, the calling routing never saves the full 64 bits of a
+ * register across a function call.  Being the interrupt handler, we're
+ * guaranteed that interrupts are disabled during this code so we don't have
+ * to worry about random interrupts blasting the high 32 bits.
+ */
+
+	.text
+	.set	push
+	.set	noreorder
+	.set	noat
+	.set	mips64
+	#.set	mips4
+	.align	5
+	NESTED(bcm1480_irq_handler, PT_SIZE, sp)
+	SAVE_ALL
+	CLI
+
+#ifdef CONFIG_SIBYTE_BCM1480_PROF
+	/* Set compare to count to silence count/compare timer interrupts */
+	mfc0	t1, CP0_COUNT
+	mtc0	t1, CP0_COMPARE /* pause to clear IP[7] bit of cause ? */
+#endif
+	/* Read cause */
+	mfc0	s0, CP0_CAUSE
+
+#ifdef CONFIG_SIBYTE_BCM1480_PROF
+	/* Cpu performance counter interrupt is routed to IP[7] */
+	andi	t1, s0, CAUSEF_IP7
+	beqz	t1, 0f
+	 srl	t1, s0, (CAUSEB_BD-2)	/* Shift BD bit to bit 2 */
+	and	t1, t1, 0x4		/* mask to get just BD bit */
+#ifdef CONFIG_MIPS64
+	dmfc0	a0, CP0_EPC
+	daddu	a0, a0, t1		/* a0 = EPC + (BD ? 4 :	0) */
+#else
+	mfc0	a0, CP0_EPC
+	addu	a0, a0, t1		/* a0 = EPC + (BD ? 4 :	0) */
+#endif
+	jal	sbprof_cpu_intr
+	 nop
+	j	ret_from_irq
+	 nop
+0:
+#endif
+
+	/* Timer interrupt is routed to IP[4] */
+	andi	t1, s0, CAUSEF_IP4
+	beqz	t1, 1f
+	 nop
+	jal	bcm1480_timer_interrupt
+	 move	a0, sp			/* Pass the registers along */
+	j	ret_from_irq
+	 nop				/* delay slot  */
+1:
+
+#ifdef CONFIG_SMP
+	/* Mailbox interrupt is routed to IP[3] */
+	andi	 t1, s0, CAUSEF_IP3
+	beqz	 t1, 2f
+	 nop
+	jal	 bcm1480_mailbox_interrupt
+	 move	 a0, sp
+	j	 ret_from_irq
+	 nop				/* delay slot  */
+2:
+#endif
+
+#ifdef CONFIG_KGDB
+	/* KGDB (uart 1) interrupt is routed to IP[6] */
+	andi	 t1, s0, CAUSEF_IP6
+	beqz	 t1, 3f
+	 nop				/* delay slot  */
+	jal	 bcm1480_kgdb_interrupt
+	 move	 a0, sp
+	j	 ret_from_irq
+	 nop				/* delay slot  */
+3:
+#endif
+
+	and	 t1, s0, CAUSEF_IP2
+	beqz	 t1, 9f
+	 nop
+
+	/*
+	 * Default...we've hit an IP[2] interrupt, which means we've got
+	 * to check the 1480 interrupt registers to figure out what to do
+	 * Need to detect which CPU we're on, now that smp_affinity is
+	 * supported.
+	 */
+	PTR_LA	 v0, CKSEG1 + A_BCM1480_IMR_CPU0_BASE
+#ifdef CONFIG_SMP
+	lw	 t1, TI_CPU($28)
+	sll	 t1, t1, BCM1480_IMR_REGISTER_SPACING_SHIFT
+	addu	 v0, v0, t1
+#endif
+
+	/* Read IP[2] status (get both high and low halves of status) */
+	ld	 s0, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H(v0)
+	ld	 s1, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L(v0)
+
+	move	 s2, zero	/* intr number  */
+	li	 s3, 64
+
+	beqz	 s0, 9f		/* No interrupts.  Return.  */
+	 move	 a1, sp
+
+	xori	 s4, s0, 1	/* if s0 (_H) == 1, it's a low intr, so...  */
+	movz	 s2, s3, s4	/* start the intr number at 64, and  */
+	movz	 s0, s1, s4	/* look at the low status value.  */
+
+	dclz	 s1, s0		/* Find the next interrupt.  */
+	dsubu	 a0, zero, s1
+	daddiu	 a0, a0, 63
+	jal	 do_IRQ
+	 daddu	 a0, a0, s2
+
+9:	j	 ret_from_irq
+	 nop
+
+	.set pop
+	END(bcm1480_irq_handler)
diff --git a/arch/mips/sibyte/bcm1480/setup.c b/arch/mips/sibyte/bcm1480/setup.c
new file mode 100644
index 000000000000..d90a0b87874c
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/setup.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mipsregs.h>
+#include <asm/io.h>
+#include <asm/sibyte/sb1250.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+unsigned int sb1_pass;
+unsigned int soc_pass;
+unsigned int soc_type;
+unsigned int periph_rev;
+unsigned int zbbus_mhz;
+
+static unsigned int part_type;
+
+static char *soc_str;
+static char *pass_str;
+
+static inline int setup_bcm1x80_bcm1x55(void);
+
+/* Setup code likely to be common to all SiByte platforms */
+
+static inline int sys_rev_decode(void)
+{
+	int ret = 0;
+
+	switch (soc_type) {
+	    case K_SYS_SOC_TYPE_BCM1x80:
+		if (part_type == K_SYS_PART_BCM1480)
+		    soc_str = "BCM1480";
+		else if (part_type == K_SYS_PART_BCM1280)
+		    soc_str = "BCM1280";
+		else
+		    soc_str = "BCM1x80";
+		ret = setup_bcm1x80_bcm1x55();
+		break;
+
+	    case K_SYS_SOC_TYPE_BCM1x55:
+		if (part_type == K_SYS_PART_BCM1455)
+		    soc_str = "BCM1455";
+		else if (part_type == K_SYS_PART_BCM1255)
+		    soc_str = "BCM1255";
+		else
+		    soc_str = "BCM1x55";
+		ret = setup_bcm1x80_bcm1x55();
+		break;
+
+	    default:
+		prom_printf("Unknown part type %x\n", part_type);
+		ret = 1;
+		break;
+	}
+	return ret;
+}
+
+static inline int setup_bcm1x80_bcm1x55(void)
+{
+	int ret = 0;
+
+	switch (soc_pass) {
+	    case K_SYS_REVISION_BCM1480_S0:
+		periph_rev = 1;
+		pass_str = "S0 (pass1)";
+		break;
+	    case K_SYS_REVISION_BCM1480_A1:
+		periph_rev = 1;
+		pass_str = "A1 (pass1)";
+		break;
+	    case K_SYS_REVISION_BCM1480_A2:
+		periph_rev = 1;
+		pass_str = "A2 (pass1)";
+		break;
+	    case K_SYS_REVISION_BCM1480_A3:
+		periph_rev = 1;
+		pass_str = "A3 (pass1)";
+		break;
+	    case K_SYS_REVISION_BCM1480_B0:
+		periph_rev = 1;
+		pass_str = "B0 (pass2)";
+		break;
+	    default:
+		prom_printf("Unknown %s rev %x\n", soc_str, soc_pass);
+		periph_rev = 1;
+		pass_str = "Unknown Revision";
+		break;
+	}
+	return ret;
+}
+
+void bcm1480_setup(void)
+{
+	uint64_t sys_rev;
+	int plldiv;
+
+	sb1_pass = read_c0_prid() & 0xff;
+	sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
+	soc_type = SYS_SOC_TYPE(sys_rev);
+	part_type = G_SYS_PART(sys_rev);
+	soc_pass = G_SYS_REVISION(sys_rev);
+
+	if (sys_rev_decode()) {
+		prom_printf("Restart after failure to identify SiByte chip\n");
+		machine_restart(NULL);
+	}
+
+	plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
+	zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25);
+
+	prom_printf("Broadcom SiByte %s %s @ %d MHz (SB-1A rev %d)\n",
+		    soc_str, pass_str, zbbus_mhz * 2, sb1_pass);
+	prom_printf("Board type: %s\n", get_system_type());
+}
diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c
new file mode 100644
index 000000000000..584a4b33faac
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/smp.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2001,2002,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+
+extern void smp_call_function_interrupt(void);
+
+/*
+ * These are routines for dealing with the bcm1480 smp capabilities
+ * independent of board/firmware
+ */
+
+static void *mailbox_0_set_regs[] = {
+	IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+	IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+	IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+	IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+};
+
+static void *mailbox_0_clear_regs[] = {
+	IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+	IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+	IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+	IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+};
+
+static void *mailbox_0_regs[] = {
+	IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+	IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+	IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+	IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+};
+
+/*
+ * SMP init and finish on secondary CPUs
+ */
+void bcm1480_smp_init(void)
+{
+	unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
+		STATUSF_IP1 | STATUSF_IP0;
+
+	/* Set interrupt mask, but don't enable */
+	change_c0_status(ST0_IM, imask);
+}
+
+void bcm1480_smp_finish(void)
+{
+	extern void bcm1480_time_init(void);
+	bcm1480_time_init();
+	local_irq_enable();
+}
+
+/*
+ * These are routines for dealing with the sb1250 smp capabilities
+ * independent of board/firmware
+ */
+
+/*
+ * Simple enough; everything is set up, so just poke the appropriate mailbox
+ * register, and we should be set
+ */
+void core_send_ipi(int cpu, unsigned int action)
+{
+	__raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]);
+}
+
+void bcm1480_mailbox_interrupt(struct pt_regs *regs)
+{
+	int cpu = smp_processor_id();
+	unsigned int action;
+
+	kstat_this_cpu.irqs[K_BCM1480_INT_MBOX_0_0]++;
+	/* Load the mailbox register to figure out what we're supposed to do */
+	action = (__raw_readq(mailbox_0_regs[cpu]) >> 48) & 0xffff;
+
+	/* Clear the mailbox to clear the interrupt */
+	__raw_writeq(((u64)action)<<48, mailbox_0_clear_regs[cpu]);
+
+	/*
+	 * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the
+	 * interrupt will do the reschedule for us
+	 */
+
+	if (action & SMP_CALL_FUNCTION)
+		smp_call_function_interrupt();
+}
diff --git a/arch/mips/sibyte/bcm1480/time.c b/arch/mips/sibyte/bcm1480/time.c
new file mode 100644
index 000000000000..e545752695a1
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/time.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2000,2001,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ * These are routines to set up and handle interrupts from the
+ * bcm1480 general purpose timer 0.  We're using the timer as a
+ * system clock, so we set it up to run at 100 Hz.  On every
+ * interrupt, we update our idea of what the time of day is,
+ * then call do_timer() in the architecture-independent kernel
+ * code to do general bookkeeping (e.g. update jiffies, run
+ * bottom halves, etc.)
+ */
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/irq.h>
+#include <asm/ptrace.h>
+#include <asm/addrspace.h>
+#include <asm/time.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250.h>
+
+
+#define IMR_IP2_VAL	K_BCM1480_INT_MAP_I0
+#define IMR_IP3_VAL	K_BCM1480_INT_MAP_I1
+#define IMR_IP4_VAL	K_BCM1480_INT_MAP_I2
+
+extern int bcm1480_steal_irq(int irq);
+
+void bcm1480_time_init(void)
+{
+	int cpu = smp_processor_id();
+	int irq = K_BCM1480_INT_TIMER_0+cpu;
+
+	/* Only have 4 general purpose timers */
+	if (cpu > 3) {
+		BUG();
+	}
+
+	if (!cpu) {
+		/* Use our own gettimeoffset() routine */
+		do_gettimeoffset = bcm1480_gettimeoffset;
+	}
+
+	bcm1480_mask_irq(cpu, irq);
+
+	/* Map the timer interrupt to ip[4] of this cpu */
+	__raw_writeq(IMR_IP4_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H)
+	      + (irq<<3)));
+
+	/* the general purpose timer ticks at 1 Mhz independent of the rest of the system */
+	/* Disable the timer and set up the count */
+	__raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+	__raw_writeq(
+#ifndef CONFIG_SIMULATION
+		1000000/HZ
+#else
+		50000/HZ
+#endif
+		, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
+
+	/* Set the timer running */
+	__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
+	      IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+
+	bcm1480_unmask_irq(cpu, irq);
+	bcm1480_steal_irq(irq);
+	/*
+	 * This interrupt is "special" in that it doesn't use the request_irq
+	 * way to hook the irq line.  The timer interrupt is initialized early
+	 * enough to make this a major pain, and it's also firing enough to
+	 * warrant a bit of special case code.  bcm1480_timer_interrupt is
+	 * called directly from irq_handler.S when IP[4] is set during an
+	 * interrupt
+	 */
+}
+
+#include <asm/sibyte/sb1250.h>
+
+void bcm1480_timer_interrupt(struct pt_regs *regs)
+{
+	int cpu = smp_processor_id();
+	int irq = K_BCM1480_INT_TIMER_0+cpu;
+
+	/* Reset the timer */
+	__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
+	      IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+
+	/*
+	 * CPU 0 handles the global timer interrupt job
+	 */
+	if (cpu == 0) {
+		ll_timer_interrupt(irq, regs);
+	}
+
+	/*
+	 * every CPU should do profiling and process accouting
+	 */
+	ll_local_timer_interrupt(irq, regs);
+}
+
+/*
+ * We use our own do_gettimeoffset() instead of the generic one,
+ * because the generic one does not work for SMP case.
+ * In addition, since we use general timer 0 for system time,
+ * we can get accurate intra-jiffy offset without calibration.
+ */
+unsigned long bcm1480_gettimeoffset(void)
+{
+	unsigned long count =
+		__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
+
+	return 1000000/HZ - count;
+}
diff --git a/arch/mips/sibyte/cfe/smp.c b/arch/mips/sibyte/cfe/smp.c
index e44ce1a9eea9..e8485124b8fc 100644
--- a/arch/mips/sibyte/cfe/smp.c
+++ b/arch/mips/sibyte/cfe/smp.c
@@ -70,8 +70,15 @@ void prom_boot_secondary(int cpu, struct task_struct *idle)
  */
 void prom_init_secondary(void)
 {
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+	extern void bcm1480_smp_init(void);
+	bcm1480_smp_init();
+#elif defined(CONFIG_SIBYTE_SB1250)
 	extern void sb1250_smp_init(void);
 	sb1250_smp_init();
+#else
+#error invalid SMP configuration
+#endif
 }
 
 /*
@@ -80,8 +87,15 @@ void prom_init_secondary(void)
  */
 void prom_smp_finish(void)
 {
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+	extern void bcm1480_smp_finish(void);
+	bcm1480_smp_finish();
+#elif defined(CONFIG_SIBYTE_SB1250)
 	extern void sb1250_smp_finish(void);
 	sb1250_smp_finish();
+#else
+#error invalid SMP configuration
+#endif
 }
 
 /*
diff --git a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
index 7f813ae9eaff..992e0d8dbb67 100644
--- a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
+++ b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
@@ -28,6 +28,8 @@
 #include <linux/fs.h>
 #include <linux/errno.h>
 #include <linux/reboot.h>
+#include <linux/smp_lock.h>
+#include <linux/wait.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/sibyte/sb1250.h>
@@ -64,24 +66,25 @@ static void arm_tb(void)
 	u_int64_t tb_options = M_SCD_TRACE_CFG_FREEZE_FULL;
 	/* Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to
 	   trigger start of trace.  XXX vary sampling period */
-	bus_writeq(0, IOADDR(A_SCD_PERF_CNT_1));
-	scdperfcnt = bus_readq(IOADDR(A_SCD_PERF_CNT_CFG));
+	__raw_writeq(0, IOADDR(A_SCD_PERF_CNT_1));
+	scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
 	/* Unfortunately, in Pass 2 we must clear all counters to knock down
 	   a previous interrupt request.  This means that bus profiling
 	   requires ALL of the SCD perf counters. */
-	bus_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) | // keep counters 0,2,3 as is
-		   M_SPC_CFG_ENABLE |		 // enable counting
-		   M_SPC_CFG_CLEAR |		 // clear all counters
-		   V_SPC_CFG_SRC1(1),		 // counter 1 counts cycles
-		   IOADDR(A_SCD_PERF_CNT_CFG));
-	bus_writeq(next, IOADDR(A_SCD_PERF_CNT_1));
+	__raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) |
+						// keep counters 0,2,3 as is
+		     M_SPC_CFG_ENABLE |		// enable counting
+		     M_SPC_CFG_CLEAR |		// clear all counters
+		     V_SPC_CFG_SRC1(1),		// counter 1 counts cycles
+		     IOADDR(A_SCD_PERF_CNT_CFG));
+	__raw_writeq(next, IOADDR(A_SCD_PERF_CNT_1));
 	/* Reset the trace buffer */
-	bus_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
+	__raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
 #if 0 && defined(M_SCD_TRACE_CFG_FORCECNT)
 	/* XXXKW may want to expose control to the data-collector */
 	tb_options |= M_SCD_TRACE_CFG_FORCECNT;
 #endif
-	bus_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG));
+	__raw_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG));
 	sbp.tb_armed = 1;
 }
 
@@ -93,23 +96,30 @@ static irqreturn_t sbprof_tb_intr(int irq, void *dev_id, struct pt_regs *regs)
 		/* XXX should use XKPHYS to make writes bypass L2 */
 		u_int64_t *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++];
 		/* Read out trace */
-		bus_writeq(M_SCD_TRACE_CFG_START_READ, IOADDR(A_SCD_TRACE_CFG));
+		__raw_writeq(M_SCD_TRACE_CFG_START_READ,
+			     IOADDR(A_SCD_TRACE_CFG));
 		__asm__ __volatile__ ("sync" : : : "memory");
 		/* Loop runs backwards because bundles are read out in reverse order */
 		for (i = 256 * 6; i > 0; i -= 6) {
 			// Subscripts decrease to put bundle in the order
 			//   t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi
-			p[i-1] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t2 hi
-			p[i-2] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t2 lo
-			p[i-3] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t1 hi
-			p[i-4] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t1 lo
-			p[i-5] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t0 hi
-			p[i-6] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t0 lo
+			p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+								// read t2 hi
+			p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+								// read t2 lo
+			p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+								// read t1 hi
+			p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+								// read t1 lo
+			p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+								// read t0 hi
+			p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+								// read t0 lo
 		}
 		if (!sbp.tb_enable) {
 			DBG(printk(DEVNAME ": tb_intr shutdown\n"));
-			bus_writeq(M_SCD_TRACE_CFG_RESET,
-				   IOADDR(A_SCD_TRACE_CFG));
+			__raw_writeq(M_SCD_TRACE_CFG_RESET,
+				     IOADDR(A_SCD_TRACE_CFG));
 			sbp.tb_armed = 0;
 			wake_up(&sbp.tb_sync);
 		} else {
@@ -118,7 +128,7 @@ static irqreturn_t sbprof_tb_intr(int irq, void *dev_id, struct pt_regs *regs)
 	} else {
 		/* No more trace buffer samples */
 		DBG(printk(DEVNAME ": tb_intr full\n"));
-		bus_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
+		__raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
 		sbp.tb_armed = 0;
 		if (!sbp.tb_enable) {
 			wake_up(&sbp.tb_sync);
@@ -152,13 +162,11 @@ int sbprof_zbprof_start(struct file *filp)
 		return -EBUSY;
 	}
 	/* Make sure there isn't a perf-cnt interrupt waiting */
-	scdperfcnt = bus_readq(IOADDR(A_SCD_PERF_CNT_CFG));
+	scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
 	/* Disable and clear counters, override SRC_1 */
-	bus_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) |
-		   M_SPC_CFG_ENABLE |
-		   M_SPC_CFG_CLEAR |
-		   V_SPC_CFG_SRC1(1),
-		   IOADDR(A_SCD_PERF_CNT_CFG));
+	__raw_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) |
+		     M_SPC_CFG_ENABLE | M_SPC_CFG_CLEAR | V_SPC_CFG_SRC1(1),
+		     IOADDR(A_SCD_PERF_CNT_CFG));
 
 	/* We grab this interrupt to prevent others from trying to use
            it, even though we don't want to service the interrupts
@@ -172,55 +180,55 @@ int sbprof_zbprof_start(struct file *filp)
 	/* I need the core to mask these, but the interrupt mapper to
 	   pass them through.  I am exploiting my knowledge that
 	   cp0_status masks out IP[5]. krw */
-	bus_writeq(K_INT_MAP_I3,
-		   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
-			  (K_INT_PERF_CNT << 3)));
+	__raw_writeq(K_INT_MAP_I3,
+		     IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
+			    (K_INT_PERF_CNT << 3)));
 
 	/* Initialize address traps */
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_0));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_1));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_2));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_3));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_0));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_1));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_2));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_3));
 
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3));
 
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2));
-	bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2));
+	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
 
 	/* Initialize Trace Event 0-7 */
 	//				when interrupt
-	bus_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7));
+	__raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7));
 
 	/* Initialize Trace Sequence 0-7 */
 	//				     Start on event 0 (interrupt)
-	bus_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff,
-		   IOADDR(A_SCD_TRACE_SEQUENCE_0));
+	__raw_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff,
+		     IOADDR(A_SCD_TRACE_SEQUENCE_0));
 	//			  dsamp when d used | asamp when a used
-	bus_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
-		   K_SCD_TRSEQ_TRIGGER_ALL,
-		   IOADDR(A_SCD_TRACE_SEQUENCE_1));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6));
-	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7));
+	__raw_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
+		     K_SCD_TRSEQ_TRIGGER_ALL,
+		     IOADDR(A_SCD_TRACE_SEQUENCE_1));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6));
+	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7));
 
 	/* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */
-	bus_writeq((1ULL << K_INT_PERF_CNT),
-		   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE)));
+	__raw_writeq(1ULL << K_INT_PERF_CNT,
+		     IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE)));
 
 	arm_tb();
 
@@ -231,6 +239,7 @@ int sbprof_zbprof_start(struct file *filp)
 
 int sbprof_zbprof_stop(void)
 {
+	DEFINE_WAIT(wait);
 	DBG(printk(DEVNAME ": stopping\n"));
 
 	if (sbp.tb_enable) {
@@ -240,7 +249,9 @@ int sbprof_zbprof_stop(void)
 		   this sleep happens. */
 		if (sbp.tb_armed) {
 			DBG(printk(DEVNAME ": wait for disarm\n"));
-			interruptible_sleep_on(&sbp.tb_sync);
+			prepare_to_wait(&sbp.tb_sync, &wait, TASK_INTERRUPTIBLE);
+			schedule();
+			finish_wait(&sbp.tb_sync, &wait);
 			DBG(printk(DEVNAME ": disarm complete\n"));
 		}
 		free_irq(K_INT_TRACE_FREEZE, &sbp);
@@ -333,13 +344,13 @@ static ssize_t sbprof_tb_read(struct file *filp, char *buf,
 	return count;
 }
 
-static int sbprof_tb_ioctl(struct inode *inode,
-			   struct file *filp,
-			   unsigned int command,
-			   unsigned long arg)
+static long sbprof_tb_ioctl(struct file *filp,
+			    unsigned int command,
+			    unsigned long arg)
 {
 	int error = 0;
 
+	lock_kernel();
 	switch (command) {
 	case SBPROF_ZBSTART:
 		error = sbprof_zbprof_start(filp);
@@ -348,13 +359,17 @@ static int sbprof_tb_ioctl(struct inode *inode,
 		error = sbprof_zbprof_stop();
 		break;
 	case SBPROF_ZBWAITFULL:
-		interruptible_sleep_on(&sbp.tb_read);
+		DEFINE_WAIT(wait);
+		prepare_to_wait(&sbp.tb_read, &wait, TASK_INTERRUPTIBLE);
+		schedule();
+		finish_wait(&sbp.tb_read, &wait);
 		/* XXXKW check if interrupted? */
 		return put_user(TB_FULL, (int *) arg);
 	default:
 		error = -EINVAL;
 		break;
 	}
+	unlock_kernel();
 
 	return error;
 }
@@ -364,7 +379,8 @@ static struct file_operations sbprof_tb_fops = {
 	.open		= sbprof_tb_open,
 	.release	= sbprof_tb_release,
 	.read		= sbprof_tb_read,
-	.ioctl		= sbprof_tb_ioctl,
+	.unlocked_ioctl	= sbprof_tb_ioctl,
+	.compat_ioctl	= sbprof_tb_ioctl,
 	.mmap		= NULL,
 };
 
diff --git a/arch/mips/sibyte/sb1250/bus_watcher.c b/arch/mips/sibyte/sb1250/bus_watcher.c
index 1a97e3127aeb..482dee054e68 100644
--- a/arch/mips/sibyte/sb1250/bus_watcher.c
+++ b/arch/mips/sibyte/sb1250/bus_watcher.c
@@ -189,7 +189,7 @@ static irqreturn_t sibyte_bw_int(int irq, void *data, struct pt_regs *regs)
 
 	for (i=0; i<256*6; i++)
 		printk("%016llx\n",
-		       (unsigned long long)bus_readq(IOADDR(A_SCD_TRACE_READ)));
+		       (long long)__raw_readq(IOADDR(A_SCD_TRACE_READ)));
 
 	csr_out32(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
 	csr_out32(M_SCD_TRACE_CFG_START, IOADDR(A_SCD_TRACE_CFG));
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 2725b263cced..589537bfcc3d 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -53,7 +53,7 @@ static void disable_sb1250_irq(unsigned int irq);
 static unsigned int startup_sb1250_irq(unsigned int irq);
 static void ack_sb1250_irq(unsigned int irq);
 #ifdef CONFIG_SMP
-static void sb1250_set_affinity(unsigned int irq, unsigned long mask);
+static void sb1250_set_affinity(unsigned int irq, cpumask_t mask);
 #endif
 
 #ifdef CONFIG_SIBYTE_HAS_LDT
@@ -71,17 +71,15 @@ extern char sb1250_duart_present[];
 #endif
 
 static struct hw_interrupt_type sb1250_irq_type = {
-	"SB1250-IMR",
-	startup_sb1250_irq,
-	shutdown_sb1250_irq,
-	enable_sb1250_irq,
-	disable_sb1250_irq,
-	ack_sb1250_irq,
-	end_sb1250_irq,
+	.typename = "SB1250-IMR",
+	.startup = startup_sb1250_irq,
+	.shutdown = shutdown_sb1250_irq,
+	.enable = enable_sb1250_irq,
+	.disable = disable_sb1250_irq,
+	.ack = ack_sb1250_irq,
+	.end = end_sb1250_irq,
 #ifdef CONFIG_SMP
-	sb1250_set_affinity
-#else
-	NULL
+	.set_affinity = sb1250_set_affinity
 #endif
 };
 
@@ -96,11 +94,11 @@ void sb1250_mask_irq(int cpu, int irq)
 	u64 cur_ints;
 
 	spin_lock_irqsave(&sb1250_imr_lock, flags);
-	cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) +
-				      R_IMR_INTERRUPT_MASK));
+	cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
+					R_IMR_INTERRUPT_MASK));
 	cur_ints |= (((u64) 1) << irq);
-	__bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
-				      R_IMR_INTERRUPT_MASK));
+	____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
+					R_IMR_INTERRUPT_MASK));
 	spin_unlock_irqrestore(&sb1250_imr_lock, flags);
 }
 
@@ -110,32 +108,25 @@ void sb1250_unmask_irq(int cpu, int irq)
 	u64 cur_ints;
 
 	spin_lock_irqsave(&sb1250_imr_lock, flags);
-	cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) +
-				      R_IMR_INTERRUPT_MASK));
+	cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
+					R_IMR_INTERRUPT_MASK));
 	cur_ints &= ~(((u64) 1) << irq);
-	__bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
-				      R_IMR_INTERRUPT_MASK));
+	____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
+					R_IMR_INTERRUPT_MASK));
 	spin_unlock_irqrestore(&sb1250_imr_lock, flags);
 }
 
 #ifdef CONFIG_SMP
-static void sb1250_set_affinity(unsigned int irq, unsigned long mask)
+static void sb1250_set_affinity(unsigned int irq, cpumask_t mask)
 {
 	int i = 0, old_cpu, cpu, int_on;
 	u64 cur_ints;
 	irq_desc_t *desc = irq_desc + irq;
 	unsigned long flags;
 
-	while (mask) {
-		if (mask & 1) {
-			mask >>= 1;
-			break;
-		}
-		mask >>= 1;
-		i++;
-	}
+	i = first_cpu(mask);
 
-	if (mask) {
+	if (cpus_weight(mask) > 1) {
 		printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
 		return;
 	}
@@ -149,23 +140,23 @@ static void sb1250_set_affinity(unsigned int irq, unsigned long mask)
 
 	/* Swizzle each CPU's IMR (but leave the IP selection alone) */
 	old_cpu = sb1250_irq_owner[irq];
-	cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(old_cpu) +
-			       R_IMR_INTERRUPT_MASK));
+	cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(old_cpu) +
+					R_IMR_INTERRUPT_MASK));
 	int_on = !(cur_ints & (((u64) 1) << irq));
 	if (int_on) {
 		/* If it was on, mask it */
 		cur_ints |= (((u64) 1) << irq);
-		__bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) +
-					      R_IMR_INTERRUPT_MASK));
+		____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) +
+					R_IMR_INTERRUPT_MASK));
 	}
 	sb1250_irq_owner[irq] = cpu;
 	if (int_on) {
 		/* unmask for the new CPU */
-		cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) +
-				       R_IMR_INTERRUPT_MASK));
+		cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
+					R_IMR_INTERRUPT_MASK));
 		cur_ints &= ~(((u64) 1) << irq);
-		__bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
-					      R_IMR_INTERRUPT_MASK));
+		____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
+					R_IMR_INTERRUPT_MASK));
 	}
 	spin_unlock(&sb1250_imr_lock);
 	spin_unlock_irqrestore(&desc->lock, flags);
@@ -208,8 +199,8 @@ static void ack_sb1250_irq(unsigned int irq)
 	 * deliver the interrupts to all CPUs (which makes affinity
 	 * changing easier for us)
 	 */
-	pending = bus_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq],
-						  R_IMR_LDT_INTERRUPT)));
+	pending = __raw_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq],
+						    R_IMR_LDT_INTERRUPT)));
 	pending &= ((u64)1 << (irq));
 	if (pending) {
 		int i;
@@ -224,8 +215,8 @@ static void ack_sb1250_irq(unsigned int irq)
 			 * Clear for all CPUs so an affinity switch
 			 * doesn't find an old status
 			 */
-			bus_writeq(pending,
-				   IOADDR(A_IMR_REGISTER(cpu,
+			__raw_writeq(pending,
+				     IOADDR(A_IMR_REGISTER(cpu,
 						R_IMR_LDT_INTERRUPT_CLR)));
 		}
 
@@ -340,12 +331,14 @@ void __init arch_init_irq(void)
 
 	/* Default everything to IP2 */
 	for (i = 0; i < SB1250_NR_IRQS; i++) {	/* was I0 */
-		bus_writeq(IMR_IP2_VAL,
-			   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
-				  (i << 3)));
-		bus_writeq(IMR_IP2_VAL,
-			   IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
-				  (i << 3)));
+		__raw_writeq(IMR_IP2_VAL,
+			     IOADDR(A_IMR_REGISTER(0,
+						   R_IMR_INTERRUPT_MAP_BASE) +
+				    (i << 3)));
+		__raw_writeq(IMR_IP2_VAL,
+			     IOADDR(A_IMR_REGISTER(1,
+						   R_IMR_INTERRUPT_MAP_BASE) +
+				    (i << 3)));
 	}
 
 	init_sb1250_irqs();
@@ -355,23 +348,23 @@ void __init arch_init_irq(void)
 	 * inter-cpu messages
 	 */
 	/* Was I1 */
-	bus_writeq(IMR_IP3_VAL,
-		   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
-			  (K_INT_MBOX_0 << 3)));
-	bus_writeq(IMR_IP3_VAL,
-		   IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
-			  (K_INT_MBOX_0 << 3)));
+	__raw_writeq(IMR_IP3_VAL,
+		     IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
+			    (K_INT_MBOX_0 << 3)));
+	__raw_writeq(IMR_IP3_VAL,
+		     IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
+			    (K_INT_MBOX_0 << 3)));
 
 	/* Clear the mailboxes.  The firmware may leave them dirty */
-	bus_writeq(0xffffffffffffffffULL,
-		   IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
-	bus_writeq(0xffffffffffffffffULL,
-		   IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU)));
+	__raw_writeq(0xffffffffffffffffULL,
+		     IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
+	__raw_writeq(0xffffffffffffffffULL,
+		     IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU)));
 
 	/* Mask everything except the mailbox registers for both cpus */
 	tmp = ~((u64) 0) ^ (((u64) 1) << K_INT_MBOX_0);
-	bus_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
-	bus_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));
+	__raw_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
+	__raw_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));
 
 	sb1250_steal_irq(K_INT_MBOX_0);
 
@@ -396,12 +389,14 @@ void __init arch_init_irq(void)
 		sb1250_duart_present[kgdb_port] = 0;
 #endif
 		/* Setup uart 1 settings, mapper */
-		bus_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
+		__raw_writeq(M_DUART_IMR_BRK,
+			     IOADDR(A_DUART_IMRREG(kgdb_port)));
 
 		sb1250_steal_irq(kgdb_irq);
-		bus_writeq(IMR_IP6_VAL,
-			   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
-				  (kgdb_irq<<3)));
+		__raw_writeq(IMR_IP6_VAL,
+			     IOADDR(A_IMR_REGISTER(0,
+						   R_IMR_INTERRUPT_MAP_BASE) +
+				    (kgdb_irq << 3)));
 		sb1250_unmask_irq(0, kgdb_irq);
 	}
 #endif
diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c
index f8c605be96c7..df2e266c700c 100644
--- a/arch/mips/sibyte/sb1250/setup.c
+++ b/arch/mips/sibyte/sb1250/setup.c
@@ -153,7 +153,7 @@ void sb1250_setup(void)
 	int bad_config = 0;
 
 	sb1_pass = read_c0_prid() & 0xff;
-	sys_rev = bus_readq(IOADDR(A_SCD_SYSTEM_REVISION));
+	sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
 	soc_type = SYS_SOC_TYPE(sys_rev);
 	soc_pass = G_SYS_REVISION(sys_rev);
 
@@ -162,7 +162,7 @@ void sb1250_setup(void)
 		machine_restart(NULL);
 	}
 
-	plldiv = G_SYS_PLL_DIV(bus_readq(IOADDR(A_SCD_SYSTEM_CFG)));
+	plldiv = G_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
 	zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25);
 
 	prom_printf("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n",
diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c
index be91b3990952..f859db02d3c9 100644
--- a/arch/mips/sibyte/sb1250/smp.c
+++ b/arch/mips/sibyte/sb1250/smp.c
@@ -29,18 +29,18 @@
 #include <asm/sibyte/sb1250_int.h>
 
 static void *mailbox_set_regs[] = {
-	(void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU),
-	(void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU)
+	IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU),
+	IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU)
 };
 
 static void *mailbox_clear_regs[] = {
-	(void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU),
-	(void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU)
+	IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU),
+	IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU)
 };
 
 static void *mailbox_regs[] = {
-	(void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU),
-	(void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU)
+	IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU),
+	IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU)
 };
 
 /*
@@ -73,7 +73,7 @@ void sb1250_smp_finish(void)
  */
 void core_send_ipi(int cpu, unsigned int action)
 {
-	bus_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
+	__raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
 }
 
 void sb1250_mailbox_interrupt(struct pt_regs *regs)
@@ -83,10 +83,10 @@ void sb1250_mailbox_interrupt(struct pt_regs *regs)
 
 	kstat_this_cpu.irqs[K_INT_MBOX_0]++;
 	/* Load the mailbox register to figure out what we're supposed to do */
-	action = (__bus_readq(mailbox_regs[cpu]) >> 48) & 0xffff;
+	action = (____raw_readq(mailbox_regs[cpu]) >> 48) & 0xffff;
 
 	/* Clear the mailbox to clear the interrupt */
-	__bus_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]);
+	____raw_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]);
 
 	/*
 	 * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the
diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c
index 8b4c848c907b..511c89d65f38 100644
--- a/arch/mips/sibyte/sb1250/time.c
+++ b/arch/mips/sibyte/sb1250/time.c
@@ -67,24 +67,24 @@ void sb1250_time_init(void)
 	sb1250_mask_irq(cpu, irq);
 
 	/* Map the timer interrupt to ip[4] of this cpu */
-	bus_writeq(IMR_IP4_VAL,
-		   IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
-			  (irq << 3)));
+	__raw_writeq(IMR_IP4_VAL,
+		     IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
+			    (irq << 3)));
 
 	/* the general purpose timer ticks at 1 Mhz independent if the rest of the system */
 	/* Disable the timer and set up the count */
-	bus_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+	__raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 #ifdef CONFIG_SIMULATION
-	bus_writeq(50000 / HZ,
-		   IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
+	__raw_writeq(50000 / HZ,
+		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
 #else
-	bus_writeq(1000000/HZ,
-		   IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
+	__raw_writeq(1000000 / HZ,
+		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
 #endif
 
 	/* Set the timer running */
-	bus_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
-		   IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+	__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 
 	sb1250_unmask_irq(cpu, irq);
 	sb1250_steal_irq(irq);
@@ -100,25 +100,25 @@ void sb1250_time_init(void)
 
 void sb1250_timer_interrupt(struct pt_regs *regs)
 {
-	extern asmlinkage void ll_local_timer_interrupt(int irq, struct pt_regs *regs);
 	int cpu = smp_processor_id();
 	int irq = K_INT_TIMER_0 + cpu;
 
 	/* Reset the timer */
-	__bus_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
-		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+	____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+		       IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 
-	/*
-	 * CPU 0 handles the global timer interrupt job
-	 */
 	if (cpu == 0) {
+		/*
+		 * CPU 0 handles the global timer interrupt job
+		 */
 		ll_timer_interrupt(irq, regs);
 	}
-
-	/*
-	 * every CPU should do profiling and process accouting
-	 */
-	ll_local_timer_interrupt(irq, regs);
+	else {
+		/*
+		 * other CPUs should just do profiling and process accounting
+		 */
+		ll_local_timer_interrupt(irq, regs);
+	}
 }
 
 /*
@@ -130,7 +130,7 @@ void sb1250_timer_interrupt(struct pt_regs *regs)
 unsigned long sb1250_gettimeoffset(void)
 {
 	unsigned long count =
-		bus_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
+		__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
 
 	return 1000000/HZ - count;
  }
diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c
index a686bb716ec6..5b4fc26c1b36 100644
--- a/arch/mips/sibyte/swarm/rtc_m41t81.c
+++ b/arch/mips/sibyte/swarm/rtc_m41t81.c
@@ -82,59 +82,60 @@
 #define M41T81REG_SQW	0x13		/* square wave register */
 
 #define M41T81_CCR_ADDRESS	0x68
-#define SMB_CSR(reg) ((u8 *) (IOADDR(A_SMB_REGISTER(1, reg))))
+
+#define SMB_CSR(reg)	IOADDR(A_SMB_REGISTER(1, reg))
 
 static int m41t81_read(uint8_t addr)
 {
-	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
 		;
 
-	bus_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
-	bus_writeq((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE),
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
+	__raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE,
+		     SMB_CSR(R_SMB_START));
 
-	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
 		;
 
-	bus_writeq((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+		     SMB_CSR(R_SMB_START));
 
-	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
 		;
 
-	if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+	if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
 		/* Clear error bit by writing a 1 */
-		bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+		__raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
 		return -1;
 	}
 
-	return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+	return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
 }
 
 static int m41t81_write(uint8_t addr, int b)
 {
-	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
 		;
 
-	bus_writeq((addr & 0xFF), SMB_CSR(R_SMB_CMD));
-	bus_writeq((b & 0xff), SMB_CSR(R_SMB_DATA));
-	bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
+	__raw_writeq(b & 0xff, SMB_CSR(R_SMB_DATA));
+	__raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
+		     SMB_CSR(R_SMB_START));
 
-	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
 		;
 
-	if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+	if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
 		/* Clear error bit by writing a 1 */
-		bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+		__raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
 		return -1;
 	}
 
 	/* read the same byte again to make sure it is written */
-	bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+		     SMB_CSR(R_SMB_START));
 
-	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
 		;
 
 	return 0;
diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c
index 981d21f16e64..d9ff9323f24e 100644
--- a/arch/mips/sibyte/swarm/rtc_xicor1241.c
+++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c
@@ -57,52 +57,52 @@
 
 #define X1241_CCR_ADDRESS	0x6F
 
-#define SMB_CSR(reg) ((u8 *) (IOADDR(A_SMB_REGISTER(1, reg))))
+#define SMB_CSR(reg)	IOADDR(A_SMB_REGISTER(1, reg))
 
 static int xicor_read(uint8_t addr)
 {
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-	bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
-	bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA));
-	bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE),
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
+	__raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA));
+	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
+		     SMB_CSR(R_SMB_START));
 
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-	bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+		     SMB_CSR(R_SMB_START));
 
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-        if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+        if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
                 /* Clear error bit by writing a 1 */
-                bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+                __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
                 return -1;
         }
 
-	return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+	return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
 }
 
 static int xicor_write(uint8_t addr, int b)
 {
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-	bus_writeq(addr, SMB_CSR(R_SMB_CMD));
-	bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
-	bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(addr, SMB_CSR(R_SMB_CMD));
+	__raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
+	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
+		     SMB_CSR(R_SMB_START));
 
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-        if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+        if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
                 /* Clear error bit by writing a 1 */
-                bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+                __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
                 return -1;
         } else {
 		return 0;
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 4daeaa413def..b614ca0ddb69 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ * Copyright (C) 2000, 2001, 2002, 2003, 2004 Broadcom Corporation
  * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
  *
  * This program is free software; you can redistribute it and/or
@@ -39,11 +39,23 @@
 #include <asm/time.h>
 #include <asm/traps.h>
 #include <asm/sibyte/sb1250.h>
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#include <asm/sibyte/bcm1480_regs.h>
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
 #include <asm/sibyte/sb1250_regs.h>
+#else
+#error invalid SiByte board configuation
+#endif
 #include <asm/sibyte/sb1250_genbus.h>
 #include <asm/sibyte/board.h>
 
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+extern void bcm1480_setup(void);
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
 extern void sb1250_setup(void);
+#else
+#error invalid SiByte board configuation
+#endif
 
 extern int xicor_probe(void);
 extern int xicor_set_time(unsigned long);
@@ -66,27 +78,34 @@ void __init swarm_timer_setup(struct irqaction *irq)
          */
 
         /* We only need to setup the generic timer */
-        sb1250_time_init();
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+	bcm1480_time_init();
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
+	sb1250_time_init();
+#else
+#error invalid SiByte board configuation
+#endif
 }
 
 int swarm_be_handler(struct pt_regs *regs, int is_fixup)
 {
 	if (!is_fixup && (regs->cp0_cause & 4)) {
 		/* Data bus error - print PA */
-#ifdef CONFIG_64BIT
-		printk("DBE physical address: %010lx\n",
+		printk("DBE physical address: %010Lx\n",
 		       __read_64bit_c0_register($26, 1));
-#else
-		printk("DBE physical address: %010llx\n",
-		       __read_64bit_c0_split($26, 1));
-#endif
 	}
 	return (is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL);
 }
 
-static int __init swarm_setup(void)
+void __init plat_setup(void)
 {
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+	bcm1480_setup();
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
 	sb1250_setup();
+#else
+#error invalid SiByte board configuation
+#endif
 
 	panic_timeout = 5;  /* For debug.  */
 
@@ -133,12 +152,8 @@ static int __init swarm_setup(void)
        };
        /* XXXKW for CFE, get lines/cols from environment */
 #endif
-
-	return 0;
 }
 
-early_initcall(swarm_setup);
-
 #ifdef LEDS_PHYS
 
 #ifdef CONFIG_SIBYTE_CARMEL
diff --git a/arch/mips/sibyte/swarm/time.c b/arch/mips/sibyte/swarm/time.c
index c1f1a9defeeb..97c73c793c35 100644
--- a/arch/mips/sibyte/swarm/time.c
+++ b/arch/mips/sibyte/swarm/time.c
@@ -79,48 +79,48 @@ static unsigned int usec_bias = 0;
 
 static int xicor_read(uint8_t addr)
 {
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-	bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
-	bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA));
-	bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE),
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
+	__raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA));
+	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
+		     SMB_CSR(R_SMB_START));
 
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-	bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+		     SMB_CSR(R_SMB_START));
 
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-        if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+        if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
                 /* Clear error bit by writing a 1 */
-                bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+                __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
                 return -1;
         }
 
-	return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+	return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
 }
 
 static int xicor_write(uint8_t addr, int b)
 {
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-	bus_writeq(addr, SMB_CSR(R_SMB_CMD));
-	bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
-	bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
-		   SMB_CSR(R_SMB_START));
+	__raw_writeq(addr, SMB_CSR(R_SMB_CMD));
+	__raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
+	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
+		     SMB_CSR(R_SMB_START));
 
-        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
                 ;
 
-        if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+        if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
                 /* Clear error bit by writing a 1 */
-                bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+                __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
                 return -1;
         } else {
 		return 0;
@@ -228,8 +228,8 @@ void __init swarm_time_init(void)
 	/* Establish communication with the Xicor 1241 RTC */
 	/* XXXKW how do I share the SMBus with the I2C subsystem? */
 
-	bus_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ));
-	bus_writeq(0, SMB_CSR(R_SMB_CONTROL));
+	__raw_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ));
+	__raw_writeq(0, SMB_CSR(R_SMB_CONTROL));
 
 	if ((status = xicor_read(X1241REG_SR_RTCF)) < 0) {
 		printk("x1241: couldn't detect on SWARM SMBus 1\n");
diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c
index 141a310d74d8..952038aa4b90 100644
--- a/arch/mips/sni/irq.c
+++ b/arch/mips/sni/irq.c
@@ -58,14 +58,13 @@ static void end_pciasic_irq(unsigned int irq)
 }
 
 static struct hw_interrupt_type pciasic_irq_type = {
-	"ASIC-PCI",
-	startup_pciasic_irq,
-	shutdown_pciasic_irq,
-	enable_pciasic_irq,
-	disable_pciasic_irq,
-	mask_and_ack_pciasic_irq,
-	end_pciasic_irq,
-	NULL
+	.typename = "ASIC-PCI",
+	.startup = startup_pciasic_irq,
+	.shutdown = shutdown_pciasic_irq,
+	.enable = enable_pciasic_irq,
+	.disable = disable_pciasic_irq,
+	.ack = mask_and_ack_pciasic_irq,
+	.end = end_pciasic_irq,
 };
 
 /*
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
index 1b3f8a0903e1..262c85680709 100644
--- a/arch/mips/sni/setup.c
+++ b/arch/mips/sni/setup.c
@@ -167,7 +167,7 @@ static inline void sni_pcimt_time_init(void)
 	rtc_set_time = mc146818_set_rtc_mmss;
 }
 
-static int __init sni_rm200_pci_setup(void)
+void __init plat_setup(void)
 {
 	sni_pcimt_detect();
 	sni_pcimt_sc_init();
@@ -196,8 +196,4 @@ static int __init sni_rm200_pci_setup(void)
 #ifdef CONFIG_PCI
 	register_pci_controller(&sni_controller);
 #endif
-
-	return 0;
 }
-
-early_initcall(sni_rm200_pci_setup);
diff --git a/arch/mips/tx4927/Kconfig b/arch/mips/tx4927/Kconfig
new file mode 100644
index 000000000000..5fbbe12e0fc1
--- /dev/null
+++ b/arch/mips/tx4927/Kconfig
@@ -0,0 +1,3 @@
+config TOSHIBA_FPCIB0
+	bool "FPCIB0 Backplane Support"
+	depends on TOSHIBA_RBTX4927
diff --git a/arch/mips/tx4927/common/tx4927_setup.c b/arch/mips/tx4927/common/tx4927_setup.c
index 26d7c53612a8..77c3b66fb959 100644
--- a/arch/mips/tx4927/common/tx4927_setup.c
+++ b/arch/mips/tx4927/common/tx4927_setup.c
@@ -64,7 +64,7 @@ static void tx4927_write_buffer_flush(void)
 }
 
 
-static void __init tx4927_setup(void)
+void __init plat_setup(void)
 {
 	board_time_init = tx4927_time_init;
 	board_timer_setup = tx4927_timer_setup;
@@ -76,12 +76,8 @@ static void __init tx4927_setup(void)
 		toshiba_rbtx4927_setup();
 	}
 #endif
-
-	return;
 }
 
-early_initcall(tx4927_setup);
-
 void __init tx4927_time_init(void)
 {
 
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
index fc0720599fd9..990fcb294bab 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
@@ -77,6 +77,11 @@
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #endif
+#ifdef CONFIG_SERIAL_TXX9
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#endif
 
 #undef TOSHIBA_RBTX4927_SETUP_DEBUG
 
@@ -920,12 +925,30 @@ void __init toshiba_rbtx4927_setup(void)
 
 #endif /* CONFIG_PCI */
 
+#ifdef CONFIG_SERIAL_TXX9
+	{
+		extern int early_serial_txx9_setup(struct uart_port *port);
+		int i;
+		struct uart_port req;
+		for(i = 0; i < 2; i++) {
+			memset(&req, 0, sizeof(req));
+			req.line = i;
+			req.iotype = UPIO_MEM;
+			req.membase = (char *)(0xff1ff300 + i * 0x100);
+			req.mapbase = 0xff1ff300 + i * 0x100;
+			req.irq = 32 + i;
+			req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+			req.uartclk = 50000000;
+			early_serial_txx9_setup(&req);
+		}
+	}
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
         argptr = prom_getcmdline();
         if (strstr(argptr, "console=") == NULL) {
                 strcat(argptr, " console=ttyS0,38400");
         }
 #endif
+#endif
 
 #ifdef CONFIG_ROOT_NFS
         argptr = prom_getcmdline();
diff --git a/arch/mips/tx4938/Kconfig b/arch/mips/tx4938/Kconfig
new file mode 100644
index 000000000000..d90e9cd85138
--- /dev/null
+++ b/arch/mips/tx4938/Kconfig
@@ -0,0 +1,24 @@
+if TOSHIBA_RBTX4938
+
+comment "Multiplex Pin Select"
+choice
+	prompt "PIO[58:61]"
+	default TOSHIBA_RBTX4938_MPLEX_PIO58_61
+
+config TOSHIBA_RBTX4938_MPLEX_PIO58_61
+	bool "PIO"
+config TOSHIBA_RBTX4938_MPLEX_NAND
+	bool "NAND"
+config TOSHIBA_RBTX4938_MPLEX_ATA
+	bool "ATA"
+
+endchoice
+
+config TX4938_NAND_BOOT
+	depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND
+	bool "NAND Boot Support (EXPERIMENTAL)"
+	help
+	  This is only for Toshiba RBTX4938 reference board, which has NAND IPL.
+	  Select this option if you need to use NAND boot.
+
+endif
diff --git a/arch/mips/tx4938/common/Makefile b/arch/mips/tx4938/common/Makefile
new file mode 100644
index 000000000000..74c95c5bcdbf
--- /dev/null
+++ b/arch/mips/tx4938/common/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for common code for Toshiba TX4927 based systems
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+obj-y	+= prom.o setup.o irq.o irq_handler.o rtc_rx5c348.o
+obj-$(CONFIG_KGDB) += dbgio.o
+
diff --git a/arch/mips/tx4938/common/dbgio.c b/arch/mips/tx4938/common/dbgio.c
new file mode 100644
index 000000000000..bea59ff1842a
--- /dev/null
+++ b/arch/mips/tx4938/common/dbgio.c
@@ -0,0 +1,50 @@
+/*
+ * linux/arch/mips/tx4938/common/dbgio.c
+ *
+ * kgdb interface for gdb
+ *
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Support for TX4938 in 2.6 - Hiroshi DOYU <Hiroshi_DOYU@montavista.co.jp>
+ */
+
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/tx4938/tx4938_mips.h>
+
+extern u8 txx9_sio_kdbg_rd(void);
+extern int txx9_sio_kdbg_wr( u8 ch );
+
+u8 getDebugChar(void)
+{
+	return (txx9_sio_kdbg_rd());
+}
+
+int putDebugChar(u8 byte)
+{
+	return (txx9_sio_kdbg_wr(byte));
+}
+
diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c
new file mode 100644
index 000000000000..4f90d7faf634
--- /dev/null
+++ b/arch/mips/tx4938/common/irq.c
@@ -0,0 +1,424 @@
+/*
+ * linux/arch/mps/tx4938/common/irq.c
+ *
+ * Common tx4938 irq handler
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/irq.h>
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/tx4938/rbtx4938.h>
+
+/**********************************************************************************/
+/* Forwad definitions for all pic's                                               */
+/**********************************************************************************/
+
+static unsigned int tx4938_irq_cp0_startup(unsigned int irq);
+static void tx4938_irq_cp0_shutdown(unsigned int irq);
+static void tx4938_irq_cp0_enable(unsigned int irq);
+static void tx4938_irq_cp0_disable(unsigned int irq);
+static void tx4938_irq_cp0_mask_and_ack(unsigned int irq);
+static void tx4938_irq_cp0_end(unsigned int irq);
+
+static unsigned int tx4938_irq_pic_startup(unsigned int irq);
+static void tx4938_irq_pic_shutdown(unsigned int irq);
+static void tx4938_irq_pic_enable(unsigned int irq);
+static void tx4938_irq_pic_disable(unsigned int irq);
+static void tx4938_irq_pic_mask_and_ack(unsigned int irq);
+static void tx4938_irq_pic_end(unsigned int irq);
+
+/**********************************************************************************/
+/* Kernel structs for all pic's                                                   */
+/**********************************************************************************/
+DEFINE_SPINLOCK(tx4938_cp0_lock);
+DEFINE_SPINLOCK(tx4938_pic_lock);
+
+#define TX4938_CP0_NAME "TX4938-CP0"
+static struct hw_interrupt_type tx4938_irq_cp0_type = {
+	.typename = TX4938_CP0_NAME,
+	.startup = tx4938_irq_cp0_startup,
+	.shutdown = tx4938_irq_cp0_shutdown,
+	.enable = tx4938_irq_cp0_enable,
+	.disable = tx4938_irq_cp0_disable,
+	.ack = tx4938_irq_cp0_mask_and_ack,
+	.end = tx4938_irq_cp0_end,
+	.set_affinity = NULL
+};
+
+#define TX4938_PIC_NAME "TX4938-PIC"
+static struct hw_interrupt_type tx4938_irq_pic_type = {
+	.typename = TX4938_PIC_NAME,
+	.startup = tx4938_irq_pic_startup,
+	.shutdown = tx4938_irq_pic_shutdown,
+	.enable = tx4938_irq_pic_enable,
+	.disable = tx4938_irq_pic_disable,
+	.ack = tx4938_irq_pic_mask_and_ack,
+	.end = tx4938_irq_pic_end,
+	.set_affinity = NULL
+};
+
+static struct irqaction tx4938_irq_pic_action = {
+	.handler = no_action,
+	.flags = 0,
+	.mask = CPU_MASK_NONE,
+	.name = TX4938_PIC_NAME
+};
+
+/**********************************************************************************/
+/* Functions for cp0                                                              */
+/**********************************************************************************/
+
+#define tx4938_irq_cp0_mask(irq) ( 1 << ( irq-TX4938_IRQ_CP0_BEG+8 ) )
+
+static void __init
+tx4938_irq_cp0_init(void)
+{
+	int i;
+
+	for (i = TX4938_IRQ_CP0_BEG; i <= TX4938_IRQ_CP0_END; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = 0;
+		irq_desc[i].depth = 1;
+		irq_desc[i].handler = &tx4938_irq_cp0_type;
+	}
+
+	return;
+}
+
+static unsigned int
+tx4938_irq_cp0_startup(unsigned int irq)
+{
+	tx4938_irq_cp0_enable(irq);
+
+	return (0);
+}
+
+static void
+tx4938_irq_cp0_shutdown(unsigned int irq)
+{
+	tx4938_irq_cp0_disable(irq);
+}
+
+static void
+tx4938_irq_cp0_enable(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&tx4938_cp0_lock, flags);
+
+	set_c0_status(tx4938_irq_cp0_mask(irq));
+
+	spin_unlock_irqrestore(&tx4938_cp0_lock, flags);
+}
+
+static void
+tx4938_irq_cp0_disable(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&tx4938_cp0_lock, flags);
+
+	clear_c0_status(tx4938_irq_cp0_mask(irq));
+
+	spin_unlock_irqrestore(&tx4938_cp0_lock, flags);
+
+	return;
+}
+
+static void
+tx4938_irq_cp0_mask_and_ack(unsigned int irq)
+{
+	tx4938_irq_cp0_disable(irq);
+
+	return;
+}
+
+static void
+tx4938_irq_cp0_end(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+		tx4938_irq_cp0_enable(irq);
+	}
+
+	return;
+}
+
+/**********************************************************************************/
+/* Functions for pic                                                              */
+/**********************************************************************************/
+
+u32
+tx4938_irq_pic_addr(int irq)
+{
+	/* MVMCP -- need to formulize this */
+	irq -= TX4938_IRQ_PIC_BEG;
+
+	switch (irq) {
+	case 17:
+	case 16:
+	case 1:
+	case 0:{
+			return (TX4938_MKA(TX4938_IRC_IRLVL0));
+		}
+	case 19:
+	case 18:
+	case 3:
+	case 2:{
+			return (TX4938_MKA(TX4938_IRC_IRLVL1));
+		}
+	case 21:
+	case 20:
+	case 5:
+	case 4:{
+			return (TX4938_MKA(TX4938_IRC_IRLVL2));
+		}
+	case 23:
+	case 22:
+	case 7:
+	case 6:{
+			return (TX4938_MKA(TX4938_IRC_IRLVL3));
+		}
+	case 25:
+	case 24:
+	case 9:
+	case 8:{
+			return (TX4938_MKA(TX4938_IRC_IRLVL4));
+		}
+	case 27:
+	case 26:
+	case 11:
+	case 10:{
+			return (TX4938_MKA(TX4938_IRC_IRLVL5));
+		}
+	case 29:
+	case 28:
+	case 13:
+	case 12:{
+			return (TX4938_MKA(TX4938_IRC_IRLVL6));
+		}
+	case 31:
+	case 30:
+	case 15:
+	case 14:{
+			return (TX4938_MKA(TX4938_IRC_IRLVL7));
+		}
+	}
+
+	return (0);
+}
+
+u32
+tx4938_irq_pic_mask(int irq)
+{
+	/* MVMCP -- need to formulize this */
+	irq -= TX4938_IRQ_PIC_BEG;
+
+	switch (irq) {
+	case 31:
+	case 29:
+	case 27:
+	case 25:
+	case 23:
+	case 21:
+	case 19:
+	case 17:{
+			return (0x07000000);
+		}
+	case 30:
+	case 28:
+	case 26:
+	case 24:
+	case 22:
+	case 20:
+	case 18:
+	case 16:{
+			return (0x00070000);
+		}
+	case 15:
+	case 13:
+	case 11:
+	case 9:
+	case 7:
+	case 5:
+	case 3:
+	case 1:{
+			return (0x00000700);
+		}
+	case 14:
+	case 12:
+	case 10:
+	case 8:
+	case 6:
+	case 4:
+	case 2:
+	case 0:{
+			return (0x00000007);
+		}
+	}
+	return (0x00000000);
+}
+
+static void
+tx4938_irq_pic_modify(unsigned pic_reg, unsigned clr_bits, unsigned set_bits)
+{
+	unsigned long val = 0;
+
+	val = TX4938_RD(pic_reg);
+	val &= (~clr_bits);
+	val |= (set_bits);
+	TX4938_WR(pic_reg, val);
+	mmiowb();
+	TX4938_RD(pic_reg);
+
+	return;
+}
+
+static void __init
+tx4938_irq_pic_init(void)
+{
+	unsigned long flags;
+	int i;
+
+	for (i = TX4938_IRQ_PIC_BEG; i <= TX4938_IRQ_PIC_END; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = 0;
+		irq_desc[i].depth = 2;
+		irq_desc[i].handler = &tx4938_irq_pic_type;
+	}
+
+	setup_irq(TX4938_IRQ_NEST_PIC_ON_CP0, &tx4938_irq_pic_action);
+
+	spin_lock_irqsave(&tx4938_pic_lock, flags);
+
+	TX4938_WR(0xff1ff640, 0x6);	/* irq level mask -- only accept hightest */
+	TX4938_WR(0xff1ff600, TX4938_RD(0xff1ff600) | 0x1);	/* irq enable */
+
+	spin_unlock_irqrestore(&tx4938_pic_lock, flags);
+
+	return;
+}
+
+static unsigned int
+tx4938_irq_pic_startup(unsigned int irq)
+{
+	tx4938_irq_pic_enable(irq);
+
+	return (0);
+}
+
+static void
+tx4938_irq_pic_shutdown(unsigned int irq)
+{
+	tx4938_irq_pic_disable(irq);
+
+	return;
+}
+
+static void
+tx4938_irq_pic_enable(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&tx4938_pic_lock, flags);
+
+	tx4938_irq_pic_modify(tx4938_irq_pic_addr(irq), 0,
+			      tx4938_irq_pic_mask(irq));
+
+	spin_unlock_irqrestore(&tx4938_pic_lock, flags);
+
+	return;
+}
+
+static void
+tx4938_irq_pic_disable(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&tx4938_pic_lock, flags);
+
+	tx4938_irq_pic_modify(tx4938_irq_pic_addr(irq),
+			      tx4938_irq_pic_mask(irq), 0);
+
+	spin_unlock_irqrestore(&tx4938_pic_lock, flags);
+
+	return;
+}
+
+static void
+tx4938_irq_pic_mask_and_ack(unsigned int irq)
+{
+	tx4938_irq_pic_disable(irq);
+
+	return;
+}
+
+static void
+tx4938_irq_pic_end(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+		tx4938_irq_pic_enable(irq);
+	}
+
+	return;
+}
+
+/**********************************************************************************/
+/* Main init functions                                                            */
+/**********************************************************************************/
+
+void __init
+tx4938_irq_init(void)
+{
+	extern asmlinkage void tx4938_irq_handler(void);
+
+	tx4938_irq_cp0_init();
+	tx4938_irq_pic_init();
+	set_except_vector(0, tx4938_irq_handler);
+
+	return;
+}
+
+int
+tx4938_irq_nested(void)
+{
+	int sw_irq = 0;
+	u32 level2;
+
+	level2 = TX4938_RD(0xff1ff6a0);
+	if ((level2 & 0x10000) == 0) {
+		level2 &= 0x1f;
+		sw_irq = TX4938_IRQ_PIC_BEG + level2;
+		if (sw_irq == 26) {
+			{
+				extern int toshiba_rbtx4938_irq_nested(int sw_irq);
+				sw_irq = toshiba_rbtx4938_irq_nested(sw_irq);
+			}
+		}
+	}
+
+	wbflush();
+	return (sw_irq);
+}
diff --git a/arch/mips/tx4938/common/irq_handler.S b/arch/mips/tx4938/common/irq_handler.S
new file mode 100644
index 000000000000..1b2f72bac42d
--- /dev/null
+++ b/arch/mips/tx4938/common/irq_handler.S
@@ -0,0 +1,84 @@
+/*
+ * linux/arch/mips/tx4938/common/handler.S
+ *
+ * Primary interrupt handler for tx4938 based systems
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/tx4938/rbtx4938.h>
+
+
+		.align	5
+		NESTED(tx4938_irq_handler, PT_SIZE, sp)
+		SAVE_ALL
+		CLI
+		.set	at
+
+		mfc0	t0, CP0_CAUSE
+		mfc0	t1, CP0_STATUS
+		and	t0, t1
+
+		andi	t1, t0, STATUSF_IP7	/* cpu timer */
+		bnez	t1, ll_ip7
+
+		/* IP6..IP3 multiplexed -- do not use */
+
+		andi	t1, t0, STATUSF_IP2	/* tx4938 pic */
+		bnez	t1, ll_ip2
+
+		andi	t1, t0, STATUSF_IP1	/* user line 1 */
+		bnez	t1, ll_ip1
+
+		andi	t1, t0, STATUSF_IP0	/* user line 0 */
+		bnez	t1, ll_ip0
+
+		.set	reorder
+
+		nop
+		END(tx4938_irq_handler)
+
+		.align	5
+
+
+ll_ip7:
+		li	a0, TX4938_IRQ_CPU_TIMER
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+
+ll_ip2:
+		jal	tx4938_irq_nested
+		nop
+		beqz	v0, goto_spurious_interrupt
+		nop
+		move	a0, v0
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+goto_spurious_interrupt:
+		j	ret_from_irq
+
+ll_ip1:
+		li	a0, TX4938_IRQ_USER1
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_ip0:
+		li	a0, TX4938_IRQ_USER0
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
diff --git a/arch/mips/tx4938/common/prom.c b/arch/mips/tx4938/common/prom.c
new file mode 100644
index 000000000000..3189a65f7d7e
--- /dev/null
+++ b/arch/mips/tx4938/common/prom.c
@@ -0,0 +1,129 @@
+/*
+ * linux/arch/mips/tx4938/common/prom.c
+ *
+ * common tx4938 memory interface
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/tx4938/tx4938.h>
+
+static unsigned int __init
+tx4938_process_sdccr(u64 * addr)
+{
+	u64 val;
+	unsigned int sdccr_ce;
+	unsigned int sdccr_rs;
+	unsigned int sdccr_cs;
+	unsigned int sdccr_mw;
+	unsigned int rs = 0;
+	unsigned int cs = 0;
+	unsigned int mw = 0;
+	unsigned int bc = 4;
+	unsigned int msize = 0;
+
+	val = (*((vu64 *) (addr)));
+
+	/* MVMCP -- need #defs for these bits masks */
+	sdccr_ce = ((val & (1 << 10)) >> 10);
+	sdccr_rs = ((val & (3 << 5)) >> 5);
+	sdccr_cs = ((val & (7 << 2)) >> 2);
+	sdccr_mw = ((val & (1 << 0)) >> 0);
+
+	if (sdccr_ce) {
+		switch (sdccr_rs) {
+		case 0:{
+				rs = 2048;
+				break;
+			}
+		case 1:{
+				rs = 4096;
+				break;
+			}
+		case 2:{
+				rs = 8192;
+				break;
+			}
+		default:{
+				rs = 0;
+				break;
+			}
+		}
+		switch (sdccr_cs) {
+		case 0:{
+				cs = 256;
+				break;
+			}
+		case 1:{
+				cs = 512;
+				break;
+			}
+		case 2:{
+				cs = 1024;
+				break;
+			}
+		case 3:{
+				cs = 2048;
+				break;
+			}
+		case 4:{
+				cs = 4096;
+				break;
+			}
+		default:{
+				cs = 0;
+				break;
+			}
+		}
+		switch (sdccr_mw) {
+		case 0:{
+				mw = 8;
+				break;
+			}	/* 8 bytes = 64 bits */
+		case 1:{
+				mw = 4;
+				break;
+			}	/* 4 bytes = 32 bits */
+		}
+	}
+
+	/*           bytes per chip    MB per chip          bank count */
+	msize = (((rs * cs * mw) / (1024 * 1024)) * (bc));
+
+	/* MVMCP -- bc hard coded to 4 from table 9.3.1     */
+	/*          boad supports bc=2 but no way to detect */
+
+	return (msize);
+}
+
+unsigned int __init
+tx4938_get_mem_size(void)
+{
+	unsigned int c0;
+	unsigned int c1;
+	unsigned int c2;
+	unsigned int c3;
+	unsigned int total;
+
+	/* MVMCP -- need #defs for these registers */
+	c0 = tx4938_process_sdccr((u64 *) 0xff1f8000);
+	c1 = tx4938_process_sdccr((u64 *) 0xff1f8008);
+	c2 = tx4938_process_sdccr((u64 *) 0xff1f8010);
+	c3 = tx4938_process_sdccr((u64 *) 0xff1f8018);
+	total = c0 + c1 + c2 + c3;
+
+	return (total);
+}
diff --git a/arch/mips/tx4938/common/rtc_rx5c348.c b/arch/mips/tx4938/common/rtc_rx5c348.c
new file mode 100644
index 000000000000..d249edbb6af4
--- /dev/null
+++ b/arch/mips/tx4938/common/rtc_rx5c348.c
@@ -0,0 +1,202 @@
+/*
+ * RTC routines for RICOH Rx5C348 SPI chip.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/rtc.h>
+#include <linux/time.h>
+#include <asm/time.h>
+#include <asm/tx4938/spi.h>
+
+#define	EPOCH		2000
+
+/* registers */
+#define Rx5C348_REG_SECOND	0
+#define Rx5C348_REG_MINUTE	1
+#define Rx5C348_REG_HOUR	2
+#define Rx5C348_REG_WEEK	3
+#define Rx5C348_REG_DAY	4
+#define Rx5C348_REG_MONTH	5
+#define Rx5C348_REG_YEAR	6
+#define Rx5C348_REG_ADJUST	7
+#define Rx5C348_REG_ALARM_W_MIN	8
+#define Rx5C348_REG_ALARM_W_HOUR	9
+#define Rx5C348_REG_ALARM_W_WEEK	10
+#define Rx5C348_REG_ALARM_D_MIN	11
+#define Rx5C348_REG_ALARM_D_HOUR	12
+#define Rx5C348_REG_CTL1	14
+#define Rx5C348_REG_CTL2	15
+
+/* register bits */
+#define Rx5C348_BIT_PM	0x20	/* REG_HOUR */
+#define Rx5C348_BIT_Y2K	0x80	/* REG_MONTH */
+#define Rx5C348_BIT_24H	0x20	/* REG_CTL1 */
+#define Rx5C348_BIT_XSTP	0x10	/* REG_CTL2 */
+
+/* commands */
+#define Rx5C348_CMD_W(addr)	(((addr) << 4) | 0x08)	/* single write */
+#define Rx5C348_CMD_R(addr)	(((addr) << 4) | 0x0c)	/* single read */
+#define Rx5C348_CMD_MW(addr)	(((addr) << 4) | 0x00)	/* burst write */
+#define Rx5C348_CMD_MR(addr)	(((addr) << 4) | 0x04)	/* burst read */
+
+static struct spi_dev_desc srtc_dev_desc = {
+	.baud 		= 1000000,	/* 1.0Mbps @ Vdd 2.0V */
+	.tcss		= 31,
+	.tcsh		= 1,
+	.tcsr		= 62,
+	/* 31us for Tcss (62us for Tcsr) is required for carry operation) */
+	.byteorder	= 1,		/* MSB-First */
+	.polarity	= 0,		/* High-Active */
+	.phase		= 1,		/* Shift-Then-Sample */
+
+};
+static int srtc_chipid;
+static int srtc_24h;
+
+static inline int
+spi_rtc_io(unsigned char *inbuf, unsigned char *outbuf, unsigned int count)
+{
+	unsigned char *inbufs[1], *outbufs[1];
+	unsigned int incounts[2], outcounts[2];
+	inbufs[0] = inbuf;
+	incounts[0] = count;
+	incounts[1] = 0;
+	outbufs[0] = outbuf;
+	outcounts[0] = count;
+	outcounts[1] = 0;
+	return txx9_spi_io(srtc_chipid, &srtc_dev_desc,
+			   inbufs, incounts, outbufs, outcounts, 0);
+}
+
+/*
+ * Conversion between binary and BCD.
+ */
+#ifndef BCD_TO_BIN
+#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)
+#endif
+
+#ifndef BIN_TO_BCD
+#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10)
+#endif
+
+/* RTC-dependent code for time.c */
+
+static int
+rtc_rx5c348_set_time(unsigned long t)
+{
+	unsigned char inbuf[8];
+	struct rtc_time tm;
+	u8 year, month, day, hour, minute, second, century;
+
+	/* convert */
+	to_tm(t, &tm);
+
+	year = tm.tm_year % 100;
+	month = tm.tm_mon+1;	/* tm_mon starts from 0 to 11 */
+	day = tm.tm_mday;
+	hour = tm.tm_hour;
+	minute = tm.tm_min;
+	second = tm.tm_sec;
+	century = tm.tm_year / 100;
+
+	inbuf[0] = Rx5C348_CMD_MW(Rx5C348_REG_SECOND);
+	BIN_TO_BCD(second);
+	inbuf[1] = second;
+	BIN_TO_BCD(minute);
+	inbuf[2] = minute;
+
+	if (srtc_24h) {
+		BIN_TO_BCD(hour);
+		inbuf[3] = hour;
+	} else {
+		/* hour 0 is AM12, noon is PM12 */
+		inbuf[3] = 0;
+		if (hour >= 12)
+			inbuf[3] = Rx5C348_BIT_PM;
+		hour = (hour + 11) % 12 + 1;
+		BIN_TO_BCD(hour);
+		inbuf[3] |= hour;
+	}
+	inbuf[4] = 0;	/* ignore week */
+	BIN_TO_BCD(day);
+	inbuf[5] = day;
+	BIN_TO_BCD(month);
+	inbuf[6] = month;
+	if (century >= 20)
+		inbuf[6] |= Rx5C348_BIT_Y2K;
+	BIN_TO_BCD(year);
+	inbuf[7] = year;
+	/* write in one transfer to avoid data inconsistency */
+	return spi_rtc_io(inbuf, NULL, 8);
+}
+
+static unsigned long
+rtc_rx5c348_get_time(void)
+{
+	unsigned char inbuf[8], outbuf[8];
+	unsigned int year, month, day, hour, minute, second;
+
+	inbuf[0] = Rx5C348_CMD_MR(Rx5C348_REG_SECOND);
+	memset(inbuf + 1, 0, 7);
+	/* read in one transfer to avoid data inconsistency */
+	if (spi_rtc_io(inbuf, outbuf, 8))
+		return 0;
+	second = outbuf[1];
+	BCD_TO_BIN(second);
+	minute = outbuf[2];
+	BCD_TO_BIN(minute);
+	if (srtc_24h) {
+		hour = outbuf[3];
+		BCD_TO_BIN(hour);
+	} else {
+		hour = outbuf[3] & ~Rx5C348_BIT_PM;
+		BCD_TO_BIN(hour);
+		hour %= 12;
+		if (outbuf[3] & Rx5C348_BIT_PM)
+			hour += 12;
+	}
+	day = outbuf[5];
+	BCD_TO_BIN(day);
+	month = outbuf[6] & ~Rx5C348_BIT_Y2K;
+	BCD_TO_BIN(month);
+	year = outbuf[7];
+	BCD_TO_BIN(year);
+	year += EPOCH;
+
+	return mktime(year, month, day, hour, minute, second);
+}
+
+void __init
+rtc_rx5c348_init(int chipid)
+{
+	unsigned char inbuf[2], outbuf[2];
+	srtc_chipid = chipid;
+	/* turn on RTC if it is not on */
+	inbuf[0] = Rx5C348_CMD_R(Rx5C348_REG_CTL2);
+	inbuf[1] = 0;
+	spi_rtc_io(inbuf, outbuf, 2);
+	if (outbuf[1] & Rx5C348_BIT_XSTP) {
+		inbuf[0] = Rx5C348_CMD_W(Rx5C348_REG_CTL2);
+		inbuf[1] = 0;
+		spi_rtc_io(inbuf, NULL, 2);
+	}
+
+	inbuf[0] = Rx5C348_CMD_R(Rx5C348_REG_CTL1);
+	inbuf[1] = 0;
+	spi_rtc_io(inbuf, outbuf, 2);
+	if (outbuf[1] & Rx5C348_BIT_24H)
+		srtc_24h = 1;
+
+	/* set the function pointers */
+	rtc_get_time = rtc_rx5c348_get_time;
+	rtc_set_time = rtc_rx5c348_set_time;
+}
diff --git a/arch/mips/tx4938/common/setup.c b/arch/mips/tx4938/common/setup.c
new file mode 100644
index 000000000000..fc992953bf95
--- /dev/null
+++ b/arch/mips/tx4938/common/setup.c
@@ -0,0 +1,91 @@
+/*
+ * linux/arch/mips/tx4938/common/setup.c
+ *
+ * common tx4938 setup routines
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/irq.h>
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/time.h>
+#include <asm/tx4938/rbtx4938.h>
+
+extern void toshiba_rbtx4938_setup(void);
+extern void rbtx4938_time_init(void);
+
+void __init tx4938_setup(void);
+void __init tx4938_time_init(void);
+void __init tx4938_timer_setup(struct irqaction *irq);
+void dump_cp0(char *key);
+
+void (*__wbflush) (void);
+
+static void
+tx4938_write_buffer_flush(void)
+{
+	mmiowb();
+
+	__asm__ __volatile__(
+		".set	push\n\t"
+		".set	noreorder\n\t"
+		"lw	$0,%0\n\t"
+		"nop\n\t"
+		".set	pop"
+		: /* no output */
+		: "m" (*(int *)KSEG1)
+		: "memory");
+}
+
+void __init
+plat_setup(void)
+{
+	board_time_init = tx4938_time_init;
+	board_timer_setup = tx4938_timer_setup;
+	__wbflush = tx4938_write_buffer_flush;
+	toshiba_rbtx4938_setup();
+}
+
+void __init
+tx4938_time_init(void)
+{
+	rbtx4938_time_init();
+}
+
+void __init
+tx4938_timer_setup(struct irqaction *irq)
+{
+	u32 count;
+	u32 c1;
+	u32 c2;
+
+	setup_irq(TX4938_IRQ_CPU_TIMER, irq);
+
+	c1 = read_c0_count();
+	count = c1 + (mips_hpt_frequency / HZ);
+	write_c0_compare(count);
+	c2 = read_c0_count();
+}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/Makefile b/arch/mips/tx4938/toshiba_rbtx4938/Makefile
new file mode 100644
index 000000000000..226941279d75
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for common code for Toshiba TX4927 based systems
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+obj-y	+= prom.o setup.o irq.o spi_eeprom.o spi_txx9.o
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/tx4938/toshiba_rbtx4938/irq.c
new file mode 100644
index 000000000000..230f5a93c2e6
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/irq.c
@@ -0,0 +1,244 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/irq.c
+ *
+ * Toshiba RBTX4938 specific interrupt handlers
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+/*
+IRQ  Device
+
+16   TX4938-CP0/00 Software 0
+17   TX4938-CP0/01 Software 1
+18   TX4938-CP0/02 Cascade TX4938-CP0
+19   TX4938-CP0/03 Multiplexed -- do not use
+20   TX4938-CP0/04 Multiplexed -- do not use
+21   TX4938-CP0/05 Multiplexed -- do not use
+22   TX4938-CP0/06 Multiplexed -- do not use
+23   TX4938-CP0/07 CPU TIMER
+
+24   TX4938-PIC/00
+25   TX4938-PIC/01
+26   TX4938-PIC/02 Cascade RBTX4938-IOC
+27   TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet
+28   TX4938-PIC/04
+29   TX4938-PIC/05 TX4938 ETH1
+30   TX4938-PIC/06 TX4938 ETH0
+31   TX4938-PIC/07
+32   TX4938-PIC/08 TX4938 SIO 0
+33   TX4938-PIC/09 TX4938 SIO 1
+34   TX4938-PIC/10 TX4938 DMA0
+35   TX4938-PIC/11 TX4938 DMA1
+36   TX4938-PIC/12 TX4938 DMA2
+37   TX4938-PIC/13 TX4938 DMA3
+38   TX4938-PIC/14
+39   TX4938-PIC/15
+40   TX4938-PIC/16 TX4938 PCIC
+41   TX4938-PIC/17 TX4938 TMR0
+42   TX4938-PIC/18 TX4938 TMR1
+43   TX4938-PIC/19 TX4938 TMR2
+44   TX4938-PIC/20
+45   TX4938-PIC/21
+46   TX4938-PIC/22 TX4938 PCIERR
+47   TX4938-PIC/23
+48   TX4938-PIC/24
+49   TX4938-PIC/25
+50   TX4938-PIC/26
+51   TX4938-PIC/27
+52   TX4938-PIC/28
+53   TX4938-PIC/29
+54   TX4938-PIC/30
+55   TX4938-PIC/31 TX4938 SPI
+
+56 RBTX4938-IOC/00 PCI-D
+57 RBTX4938-IOC/01 PCI-C
+58 RBTX4938-IOC/02 PCI-B
+59 RBTX4938-IOC/03 PCI-A
+60 RBTX4938-IOC/04 RTC
+61 RBTX4938-IOC/05 ATA
+62 RBTX4938-IOC/06 MODEM
+63 RBTX4938-IOC/07 SWINT
+*/
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/timex.h>
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <linux/version.h>
+#include <linux/bootmem.h>
+#include <asm/tx4938/rbtx4938.h>
+
+static unsigned int toshiba_rbtx4938_irq_ioc_startup(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_shutdown(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_mask_and_ack(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_end(unsigned int irq);
+
+DEFINE_SPINLOCK(toshiba_rbtx4938_ioc_lock);
+
+#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC"
+static struct hw_interrupt_type toshiba_rbtx4938_irq_ioc_type = {
+	.typename = TOSHIBA_RBTX4938_IOC_NAME,
+	.startup = toshiba_rbtx4938_irq_ioc_startup,
+	.shutdown = toshiba_rbtx4938_irq_ioc_shutdown,
+	.enable = toshiba_rbtx4938_irq_ioc_enable,
+	.disable = toshiba_rbtx4938_irq_ioc_disable,
+	.ack = toshiba_rbtx4938_irq_ioc_mask_and_ack,
+	.end = toshiba_rbtx4938_irq_ioc_end,
+	.set_affinity = NULL
+};
+
+#define TOSHIBA_RBTX4938_IOC_INTR_ENAB 0xb7f02000
+#define TOSHIBA_RBTX4938_IOC_INTR_STAT 0xb7f0200a
+
+int
+toshiba_rbtx4938_irq_nested(int sw_irq)
+{
+	u8 level3;
+
+	level3 = reg_rd08(TOSHIBA_RBTX4938_IOC_INTR_STAT) & 0xff;
+	if (level3) {
+		/* must use fls so onboard ATA has priority */
+		sw_irq = TOSHIBA_RBTX4938_IRQ_IOC_BEG + fls(level3) - 1;
+	}
+
+	wbflush();
+	return sw_irq;
+}
+
+static struct irqaction toshiba_rbtx4938_irq_ioc_action = {
+	.handler = no_action,
+	.flags = 0,
+	.mask = CPU_MASK_NONE,
+	.name = TOSHIBA_RBTX4938_IOC_NAME,
+};
+
+/**********************************************************************************/
+/* Functions for ioc                                                              */
+/**********************************************************************************/
+static void __init
+toshiba_rbtx4938_irq_ioc_init(void)
+{
+	int i;
+
+	for (i = TOSHIBA_RBTX4938_IRQ_IOC_BEG;
+	     i <= TOSHIBA_RBTX4938_IRQ_IOC_END; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = 0;
+		irq_desc[i].depth = 3;
+		irq_desc[i].handler = &toshiba_rbtx4938_irq_ioc_type;
+	}
+
+	setup_irq(RBTX4938_IRQ_IOCINT,
+		  &toshiba_rbtx4938_irq_ioc_action);
+}
+
+static unsigned int
+toshiba_rbtx4938_irq_ioc_startup(unsigned int irq)
+{
+	toshiba_rbtx4938_irq_ioc_enable(irq);
+
+	return 0;
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_shutdown(unsigned int irq)
+{
+	toshiba_rbtx4938_irq_ioc_disable(irq);
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_enable(unsigned int irq)
+{
+	unsigned long flags;
+	volatile unsigned char v;
+
+	spin_lock_irqsave(&toshiba_rbtx4938_ioc_lock, flags);
+
+	v = TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB);
+	v |= (1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
+	TX4938_WR08(TOSHIBA_RBTX4938_IOC_INTR_ENAB, v);
+	mmiowb();
+	TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB);
+
+	spin_unlock_irqrestore(&toshiba_rbtx4938_ioc_lock, flags);
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_disable(unsigned int irq)
+{
+	unsigned long flags;
+	volatile unsigned char v;
+
+	spin_lock_irqsave(&toshiba_rbtx4938_ioc_lock, flags);
+
+	v = TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB);
+	v &= ~(1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
+	TX4938_WR08(TOSHIBA_RBTX4938_IOC_INTR_ENAB, v);
+	mmiowb();
+	TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB);
+
+	spin_unlock_irqrestore(&toshiba_rbtx4938_ioc_lock, flags);
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_mask_and_ack(unsigned int irq)
+{
+	toshiba_rbtx4938_irq_ioc_disable(irq);
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_end(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+		toshiba_rbtx4938_irq_ioc_enable(irq);
+	}
+}
+
+extern void __init txx9_spi_irqinit(int irc_irq);
+
+void __init arch_init_irq(void)
+{
+	extern void tx4938_irq_init(void);
+
+	/* Now, interrupt control disabled, */
+	/* all IRC interrupts are masked, */
+	/* all IRC interrupt mode are Low Active. */
+
+	/* mask all IOC interrupts */
+	*rbtx4938_imask_ptr = 0;
+
+	/* clear SoftInt interrupts */
+	*rbtx4938_softint_ptr = 0;
+	tx4938_irq_init();
+	toshiba_rbtx4938_irq_ioc_init();
+	/* Onboard 10M Ether: High Active */
+	TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM0), 0x00000040);
+
+	if (tx4938_ccfgptr->pcfg & TX4938_PCFG_SPI_SEL) {
+		txx9_spi_irqinit(RBTX4938_IRQ_IRC_SPI);
+        }
+
+	wbflush();
+}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/prom.c b/arch/mips/tx4938/toshiba_rbtx4938/prom.c
new file mode 100644
index 000000000000..7df8b32ba265
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/prom.c
@@ -0,0 +1,78 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/prom.c
+ *
+ * rbtx4938 specific prom routines
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/tx4938/tx4938.h>
+
+void __init prom_init_cmdline(void)
+{
+	int argc = (int) fw_arg0;
+	char **argv = (char **) fw_arg1;
+	int i;
+
+	/* ignore all built-in args if any f/w args given */
+	if (argc > 1) {
+		*arcs_cmdline = '\0';
+	}
+
+	for (i = 1; i < argc; i++) {
+		if (i != 1) {
+			strcat(arcs_cmdline, " ");
+		}
+		strcat(arcs_cmdline, argv[i]);
+	}
+}
+
+void __init prom_init(void)
+{
+	extern int tx4938_get_mem_size(void);
+	int msize;
+#ifndef CONFIG_TX4938_NAND_BOOT
+	prom_init_cmdline();
+#endif
+	mips_machgroup = MACH_GROUP_TOSHIBA;
+	mips_machtype = MACH_TOSHIBA_RBTX4938;
+
+	msize = tx4938_get_mem_size();
+	add_memory_region(0, msize << 20, BOOT_MEM_RAM);
+
+	return;
+}
+
+unsigned long  __init prom_free_prom_memory(void)
+{
+	return 0;
+}
+
+void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
+{
+	return;
+}
+
+const char *get_system_type(void)
+{
+	return "Toshiba RBTX4938";
+}
+
+char * __init prom_getcmdline(void)
+{
+	return &(arcs_cmdline[0]);
+}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
new file mode 100644
index 000000000000..9f1dcc8ca5a3
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
@@ -0,0 +1,1035 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/setup.c
+ *
+ * Setup pointers to hardware-dependent routines.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/console.h>
+#include <linux/pci.h>
+#include <asm/wbflush.h>
+#include <asm/reboot.h>
+#include <asm/irq.h>
+#include <asm/time.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/bootinfo.h>
+#include <asm/tx4938/rbtx4938.h>
+#ifdef CONFIG_SERIAL_TXX9
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#endif
+
+extern void rbtx4938_time_init(void) __init;
+extern char * __init prom_getcmdline(void);
+static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr);
+
+/* These functions are used for rebooting or halting the machine*/
+extern void rbtx4938_machine_restart(char *command);
+extern void rbtx4938_machine_halt(void);
+extern void rbtx4938_machine_power_off(void);
+
+/* clocks */
+unsigned int txx9_master_clock;
+unsigned int txx9_cpu_clock;
+unsigned int txx9_gbus_clock;
+
+unsigned long rbtx4938_ce_base[8];
+unsigned long rbtx4938_ce_size[8];
+int txboard_pci66_mode;
+static int tx4938_pcic_trdyto;	/* default: disabled */
+static int tx4938_pcic_retryto;	/* default: disabled */
+static int tx4938_ccfg_toeon = 1;
+
+struct tx4938_pcic_reg *pcicptrs[4] = {
+       tx4938_pcicptr  /* default setting for TX4938 */
+};
+
+static struct {
+	unsigned long base;
+	unsigned long size;
+} phys_regions[16] __initdata;
+static int num_phys_regions  __initdata;
+
+#define PHYS_REGION_MINSIZE	0x10000
+
+void rbtx4938_machine_halt(void)
+{
+        printk(KERN_NOTICE "System Halted\n");
+	local_irq_disable();
+
+	while (1)
+		__asm__(".set\tmips3\n\t"
+			"wait\n\t"
+			".set\tmips0");
+}
+
+void rbtx4938_machine_power_off(void)
+{
+        rbtx4938_machine_halt();
+        /* no return */
+}
+
+void rbtx4938_machine_restart(char *command)
+{
+	local_irq_disable();
+
+	printk("Rebooting...");
+	*rbtx4938_softresetlock_ptr = 1;
+	*rbtx4938_sfvol_ptr = 1;
+	*rbtx4938_softreset_ptr = 1;
+	wbflush();
+
+	while(1);
+}
+
+void __init
+txboard_add_phys_region(unsigned long base, unsigned long size)
+{
+	if (num_phys_regions >= ARRAY_SIZE(phys_regions)) {
+		printk("phys_region overflow\n");
+		return;
+	}
+	phys_regions[num_phys_regions].base = base;
+	phys_regions[num_phys_regions].size = size;
+	num_phys_regions++;
+}
+unsigned long __init
+txboard_find_free_phys_region(unsigned long begin, unsigned long end,
+			      unsigned long size)
+{
+	unsigned long base;
+	int i;
+
+	for (base = begin / size * size; base < end; base += size) {
+		for (i = 0; i < num_phys_regions; i++) {
+			if (phys_regions[i].size &&
+			    base <= phys_regions[i].base + (phys_regions[i].size - 1) &&
+			    base + (size - 1) >= phys_regions[i].base)
+				break;
+		}
+		if (i == num_phys_regions)
+			return base;
+	}
+	return 0;
+}
+unsigned long __init
+txboard_find_free_phys_region_shrink(unsigned long begin, unsigned long end,
+				     unsigned long *size)
+{
+	unsigned long sz, base;
+	for (sz = *size; sz >= PHYS_REGION_MINSIZE; sz /= 2) {
+		base = txboard_find_free_phys_region(begin, end, sz);
+		if (base) {
+			*size = sz;
+			return base;
+		}
+	}
+	return 0;
+}
+unsigned long __init
+txboard_request_phys_region_range(unsigned long begin, unsigned long end,
+				  unsigned long size)
+{
+	unsigned long base;
+	base = txboard_find_free_phys_region(begin, end, size);
+	if (base)
+		txboard_add_phys_region(base, size);
+	return base;
+}
+unsigned long __init
+txboard_request_phys_region(unsigned long size)
+{
+	unsigned long base;
+	unsigned long begin = 0, end = 0x20000000;	/* search low 512MB */
+	base = txboard_find_free_phys_region(begin, end, size);
+	if (base)
+		txboard_add_phys_region(base, size);
+	return base;
+}
+unsigned long __init
+txboard_request_phys_region_shrink(unsigned long *size)
+{
+	unsigned long base;
+	unsigned long begin = 0, end = 0x20000000;	/* search low 512MB */
+	base = txboard_find_free_phys_region_shrink(begin, end, size);
+	if (base)
+		txboard_add_phys_region(base, *size);
+	return base;
+}
+
+#ifdef CONFIG_PCI
+void __init
+tx4938_pcic_setup(struct tx4938_pcic_reg *pcicptr,
+		  struct pci_controller *channel,
+		  unsigned long pci_io_base,
+		  int extarb)
+{
+	int i;
+
+	/* Disable All Initiator Space */
+	pcicptr->pciccfg &= ~(TX4938_PCIC_PCICCFG_G2PMEN(0)|
+			      TX4938_PCIC_PCICCFG_G2PMEN(1)|
+			      TX4938_PCIC_PCICCFG_G2PMEN(2)|
+			      TX4938_PCIC_PCICCFG_G2PIOEN);
+
+	/* GB->PCI mappings */
+	pcicptr->g2piomask = (channel->io_resource->end - channel->io_resource->start) >> 4;
+	pcicptr->g2piogbase = pci_io_base |
+#ifdef __BIG_ENDIAN
+		TX4938_PCIC_G2PIOGBASE_ECHG
+#else
+		TX4938_PCIC_G2PIOGBASE_BSDIS
+#endif
+		;
+	pcicptr->g2piopbase = 0;
+	for (i = 0; i < 3; i++) {
+		pcicptr->g2pmmask[i] = 0;
+		pcicptr->g2pmgbase[i] = 0;
+		pcicptr->g2pmpbase[i] = 0;
+	}
+	if (channel->mem_resource->end) {
+		pcicptr->g2pmmask[0] = (channel->mem_resource->end - channel->mem_resource->start) >> 4;
+		pcicptr->g2pmgbase[0] = channel->mem_resource->start |
+#ifdef __BIG_ENDIAN
+			TX4938_PCIC_G2PMnGBASE_ECHG
+#else
+			TX4938_PCIC_G2PMnGBASE_BSDIS
+#endif
+			;
+		pcicptr->g2pmpbase[0] = channel->mem_resource->start;
+	}
+	/* PCI->GB mappings (I/O 256B) */
+	pcicptr->p2giopbase = 0; /* 256B */
+	pcicptr->p2giogbase = 0;
+	/* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */
+	pcicptr->p2gm0plbase = 0;
+	pcicptr->p2gm0pubase = 0;
+	pcicptr->p2gmgbase[0] = 0 |
+		TX4938_PCIC_P2GMnGBASE_TMEMEN |
+#ifdef __BIG_ENDIAN
+		TX4938_PCIC_P2GMnGBASE_TECHG
+#else
+		TX4938_PCIC_P2GMnGBASE_TBSDIS
+#endif
+		;
+	/* PCI->GB mappings (MEM 16MB) */
+	pcicptr->p2gm1plbase = 0xffffffff;
+	pcicptr->p2gm1pubase = 0xffffffff;
+	pcicptr->p2gmgbase[1] = 0;
+	/* PCI->GB mappings (MEM 1MB) */
+	pcicptr->p2gm2pbase = 0xffffffff; /* 1MB */
+	pcicptr->p2gmgbase[2] = 0;
+
+	pcicptr->pciccfg &= TX4938_PCIC_PCICCFG_GBWC_MASK;
+	/* Enable Initiator Memory Space */
+	if (channel->mem_resource->end)
+		pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PMEN(0);
+	/* Enable Initiator I/O Space */
+	if (channel->io_resource->end)
+		pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PIOEN;
+	/* Enable Initiator Config */
+	pcicptr->pciccfg |=
+		TX4938_PCIC_PCICCFG_ICAEN |
+		TX4938_PCIC_PCICCFG_TCAR;
+
+	/* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */
+	pcicptr->pcicfg1 = 0;
+
+	pcicptr->g2ptocnt &= ~0xffff;
+
+	if (tx4938_pcic_trdyto >= 0) {
+		pcicptr->g2ptocnt &= ~0xff;
+		pcicptr->g2ptocnt |= (tx4938_pcic_trdyto & 0xff);
+	}
+
+	if (tx4938_pcic_retryto >= 0) {
+		pcicptr->g2ptocnt &= ~0xff00;
+		pcicptr->g2ptocnt |= ((tx4938_pcic_retryto<<8) & 0xff00);
+	}
+
+	/* Clear All Local Bus Status */
+	pcicptr->pcicstatus = TX4938_PCIC_PCICSTATUS_ALL;
+	/* Enable All Local Bus Interrupts */
+	pcicptr->pcicmask = TX4938_PCIC_PCICSTATUS_ALL;
+	/* Clear All Initiator Status */
+	pcicptr->g2pstatus = TX4938_PCIC_G2PSTATUS_ALL;
+	/* Enable All Initiator Interrupts */
+	pcicptr->g2pmask = TX4938_PCIC_G2PSTATUS_ALL;
+	/* Clear All PCI Status Error */
+	pcicptr->pcistatus =
+		(pcicptr->pcistatus & 0x0000ffff) |
+		(TX4938_PCIC_PCISTATUS_ALL << 16);
+	/* Enable All PCI Status Error Interrupts */
+	pcicptr->pcimask = TX4938_PCIC_PCISTATUS_ALL;
+
+	if (!extarb) {
+		/* Reset Bus Arbiter */
+		pcicptr->pbacfg = TX4938_PCIC_PBACFG_RPBA;
+		pcicptr->pbabm = 0;
+		/* Enable Bus Arbiter */
+		pcicptr->pbacfg = TX4938_PCIC_PBACFG_PBAEN;
+	}
+
+      /* PCIC Int => IRC IRQ16 */
+	pcicptr->pcicfg2 =
+		    (pcicptr->pcicfg2 & 0xffffff00) | TX4938_IR_PCIC;
+
+	pcicptr->pcistatus = PCI_COMMAND_MASTER |
+		PCI_COMMAND_MEMORY |
+		PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+}
+
+int __init
+tx4938_report_pciclk(void)
+{
+	unsigned long pcode = TX4938_REV_PCODE();
+	int pciclk = 0;
+	printk("TX%lx PCIC --%s PCICLK:",
+	       pcode,
+	       (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) ? " PCI66" : "");
+	if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
+
+		switch ((unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK) {
+		case TX4938_CCFG_PCIDIVMODE_4:
+			pciclk = txx9_cpu_clock / 4; break;
+		case TX4938_CCFG_PCIDIVMODE_4_5:
+			pciclk = txx9_cpu_clock * 2 / 9; break;
+		case TX4938_CCFG_PCIDIVMODE_5:
+			pciclk = txx9_cpu_clock / 5; break;
+		case TX4938_CCFG_PCIDIVMODE_5_5:
+			pciclk = txx9_cpu_clock * 2 / 11; break;
+		case TX4938_CCFG_PCIDIVMODE_8:
+			pciclk = txx9_cpu_clock / 8; break;
+		case TX4938_CCFG_PCIDIVMODE_9:
+			pciclk = txx9_cpu_clock / 9; break;
+		case TX4938_CCFG_PCIDIVMODE_10:
+			pciclk = txx9_cpu_clock / 10; break;
+		case TX4938_CCFG_PCIDIVMODE_11:
+			pciclk = txx9_cpu_clock / 11; break;
+		}
+		printk("Internal(%dMHz)", pciclk / 1000000);
+	} else {
+		printk("External");
+		pciclk = -1;
+	}
+	printk("\n");
+	return pciclk;
+}
+
+void __init set_tx4938_pcicptr(int ch, struct tx4938_pcic_reg *pcicptr)
+{
+	pcicptrs[ch] = pcicptr;
+}
+
+struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch)
+{
+       return pcicptrs[ch];
+}
+
+static struct pci_dev *fake_pci_dev(struct pci_controller *hose,
+                                    int top_bus, int busnr, int devfn)
+{
+	static struct pci_dev dev;
+	static struct pci_bus bus;
+
+	dev.sysdata = (void *)hose;
+	dev.devfn = devfn;
+	bus.number = busnr;
+	bus.ops = hose->pci_ops;
+	bus.parent = NULL;
+	dev.bus = &bus;
+
+	return &dev;
+}
+
+#define EARLY_PCI_OP(rw, size, type)                                    \
+static int early_##rw##_config_##size(struct pci_controller *hose,      \
+        int top_bus, int bus, int devfn, int offset, type value)        \
+{                                                                       \
+        return pci_##rw##_config_##size(                                \
+                fake_pci_dev(hose, top_bus, bus, devfn),                \
+                offset, value);                                         \
+}
+
+EARLY_PCI_OP(read, word, u16 *)
+
+int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bus)
+{
+	u32 pci_devfn;
+	unsigned short vid;
+	int devfn_start = 0;
+	int devfn_stop = 0xff;
+	int cap66 = -1;
+	u16 stat;
+
+	printk("PCI: Checking 66MHz capabilities...\n");
+
+	for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
+		early_read_config_word(hose, top_bus, current_bus, pci_devfn,
+				       PCI_VENDOR_ID, &vid);
+
+		if (vid == 0xffff) continue;
+
+		/* check 66MHz capability */
+		if (cap66 < 0)
+			cap66 = 1;
+		if (cap66) {
+			early_read_config_word(hose, top_bus, current_bus, pci_devfn,
+					       PCI_STATUS, &stat);
+			if (!(stat & PCI_STATUS_66MHZ)) {
+				printk(KERN_DEBUG "PCI: %02x:%02x not 66MHz capable.\n",
+				       current_bus, pci_devfn);
+				cap66 = 0;
+				break;
+			}
+		}
+	}
+	return cap66 > 0;
+}
+
+int __init
+tx4938_pciclk66_setup(void)
+{
+	int pciclk;
+
+	/* Assert M66EN */
+	tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI66;
+	/* Double PCICLK (if possible) */
+	if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
+		unsigned int pcidivmode =
+			tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK;
+		switch (pcidivmode) {
+		case TX4938_CCFG_PCIDIVMODE_8:
+		case TX4938_CCFG_PCIDIVMODE_4:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_4;
+			pciclk = txx9_cpu_clock / 4;
+			break;
+		case TX4938_CCFG_PCIDIVMODE_9:
+		case TX4938_CCFG_PCIDIVMODE_4_5:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5;
+			pciclk = txx9_cpu_clock * 2 / 9;
+			break;
+		case TX4938_CCFG_PCIDIVMODE_10:
+		case TX4938_CCFG_PCIDIVMODE_5:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_5;
+			pciclk = txx9_cpu_clock / 5;
+			break;
+		case TX4938_CCFG_PCIDIVMODE_11:
+		case TX4938_CCFG_PCIDIVMODE_5_5:
+		default:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5;
+			pciclk = txx9_cpu_clock * 2 / 11;
+			break;
+		}
+		tx4938_ccfgptr->ccfg =
+			(tx4938_ccfgptr->ccfg & ~TX4938_CCFG_PCIDIVMODE_MASK)
+			| pcidivmode;
+		printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n",
+		       (unsigned long)tx4938_ccfgptr->ccfg);
+	} else {
+		pciclk = -1;
+	}
+	return pciclk;
+}
+
+extern struct pci_controller tx4938_pci_controller[];
+static int __init tx4938_pcibios_init(void)
+{
+	unsigned long mem_base[2];
+	unsigned long mem_size[2] = {TX4938_PCIMEM_SIZE_0,TX4938_PCIMEM_SIZE_1}; /* MAX 128M,64K */
+	unsigned long io_base[2];
+	unsigned long io_size[2] = {TX4938_PCIIO_SIZE_0,TX4938_PCIIO_SIZE_1}; /* MAX 16M,64K */
+	/* TX4938 PCIC1: 64K MEM/IO is enough for ETH0,ETH1 */
+	int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB);
+
+	PCIBIOS_MIN_IO = 0x00001000UL;
+	PCIBIOS_MIN_MEM = 0x01000000UL;
+
+	mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]);
+	io_base[0] = txboard_request_phys_region_shrink(&io_size[0]);
+
+	printk("TX4938 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
+	       (unsigned short)(tx4938_pcicptr->pciid >> 16),
+	       (unsigned short)(tx4938_pcicptr->pciid & 0xffff),
+	       (unsigned short)(tx4938_pcicptr->pciccrev & 0xff),
+	       extarb ? "External" : "Internal");
+
+	/* setup PCI area */
+	tx4938_pci_controller[0].io_resource->start = io_base[0];
+	tx4938_pci_controller[0].io_resource->end = (io_base[0] + io_size[0]) - 1;
+	tx4938_pci_controller[0].mem_resource->start = mem_base[0];
+	tx4938_pci_controller[0].mem_resource->end = mem_base[0] + mem_size[0] - 1;
+
+	set_tx4938_pcicptr(0, tx4938_pcicptr);
+
+	register_pci_controller(&tx4938_pci_controller[0]);
+
+	if (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) {
+		printk("TX4938_CCFG_PCI66 already configured\n");
+		txboard_pci66_mode = -1; /* already configured */
+	}
+
+	/* Reset PCI Bus */
+	*rbtx4938_pcireset_ptr = 0;
+	/* Reset PCIC */
+	tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
+	if (txboard_pci66_mode > 0)
+		tx4938_pciclk66_setup();
+	mdelay(10);
+	/* clear PCIC reset */
+	tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
+	*rbtx4938_pcireset_ptr = 1;
+	wbflush();
+	tx4938_report_pcic_status1(tx4938_pcicptr);
+
+	tx4938_report_pciclk();
+	tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
+	if (txboard_pci66_mode == 0 &&
+	    txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) {
+		/* Reset PCI Bus */
+		*rbtx4938_pcireset_ptr = 0;
+		/* Reset PCIC */
+		tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
+		tx4938_pciclk66_setup();
+		mdelay(10);
+		/* clear PCIC reset */
+		tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
+		*rbtx4938_pcireset_ptr = 1;
+		wbflush();
+		/* Reinitialize PCIC */
+		tx4938_report_pciclk();
+		tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
+	}
+
+	mem_base[1] = txboard_request_phys_region_shrink(&mem_size[1]);
+	io_base[1] = txboard_request_phys_region_shrink(&io_size[1]);
+	/* Reset PCIC1 */
+	tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIC1RST;
+	/* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */
+	if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD))
+		tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI1_66;
+	else
+		tx4938_ccfgptr->ccfg &= ~TX4938_CCFG_PCI1_66;
+	mdelay(10);
+	/* clear PCIC1 reset */
+	tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
+	tx4938_report_pcic_status1(tx4938_pcic1ptr);
+
+	printk("TX4938 PCIC1 -- DID:%04x VID:%04x RID:%02x",
+	       (unsigned short)(tx4938_pcic1ptr->pciid >> 16),
+	       (unsigned short)(tx4938_pcic1ptr->pciid & 0xffff),
+	       (unsigned short)(tx4938_pcic1ptr->pciccrev & 0xff));
+	printk("%s PCICLK:%dMHz\n",
+	       (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1_66) ? " PCI66" : "",
+	       txx9_gbus_clock /
+	       ((tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2) /
+	       1000000);
+
+	/* assumption: CPHYSADDR(mips_io_port_base) == io_base[0] */
+	tx4938_pci_controller[1].io_resource->start =
+		io_base[1] - io_base[0];
+	tx4938_pci_controller[1].io_resource->end =
+		io_base[1] - io_base[0] + io_size[1] - 1;
+	tx4938_pci_controller[1].mem_resource->start = mem_base[1];
+	tx4938_pci_controller[1].mem_resource->end =
+		mem_base[1] + mem_size[1] - 1;
+	set_tx4938_pcicptr(1, tx4938_pcic1ptr);
+
+	register_pci_controller(&tx4938_pci_controller[1]);
+
+	tx4938_pcic_setup(tx4938_pcic1ptr, &tx4938_pci_controller[1], io_base[1], extarb);
+
+	/* map ioport 0 to PCI I/O space address 0 */
+	set_io_port_base(KSEG1 + io_base[0]);
+
+	return 0;
+}
+
+arch_initcall(tx4938_pcibios_init);
+
+#endif /* CONFIG_PCI */
+
+/* SPI support */
+
+/* chip select for SPI devices */
+#define	SEEPROM1_CS	7	/* PIO7 */
+#define	SEEPROM2_CS	0	/* IOC */
+#define	SEEPROM3_CS	1	/* IOC */
+#define	SRTC_CS	2	/* IOC */
+
+static int rbtx4938_spi_cs_func(int chipid, int on)
+{
+	unsigned char bit;
+	switch (chipid) {
+	case RBTX4938_SEEPROM1_CHIPID:
+		if (on)
+			tx4938_pioptr->dout &= ~(1 << SEEPROM1_CS);
+		else
+			tx4938_pioptr->dout |= (1 << SEEPROM1_CS);
+		return 0;
+		break;
+	case RBTX4938_SEEPROM2_CHIPID:
+		bit = (1 << SEEPROM2_CS);
+		break;
+	case RBTX4938_SEEPROM3_CHIPID:
+		bit = (1 << SEEPROM3_CS);
+		break;
+	case RBTX4938_SRTC_CHIPID:
+		bit = (1 << SRTC_CS);
+		break;
+	default:
+		return -ENODEV;
+	}
+	/* bit1,2,4 are low active, bit3 is high active */
+	*rbtx4938_spics_ptr =
+		(*rbtx4938_spics_ptr & ~bit) |
+		((on ? (bit ^ 0x0b) : ~(bit ^ 0x0b)) & bit);
+	return 0;
+}
+
+#ifdef CONFIG_PCI
+extern int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len);
+
+int rbtx4938_get_tx4938_ethaddr(struct pci_dev *dev, unsigned char *addr)
+{
+	struct pci_controller *channel = (struct pci_controller *)dev->bus->sysdata;
+	static unsigned char dat[17];
+	static int read_dat = 0;
+	int ch = 0;
+
+	if (channel != &tx4938_pci_controller[1])
+		return -ENODEV;
+	/* TX4938 PCIC1 */
+	switch (PCI_SLOT(dev->devfn)) {
+	case TX4938_PCIC_IDSEL_AD_TO_SLOT(31):
+		ch = 0;
+		break;
+	case TX4938_PCIC_IDSEL_AD_TO_SLOT(30):
+		ch = 1;
+		break;
+	default:
+		return -ENODEV;
+	}
+	if (!read_dat) {
+		unsigned char sum;
+		int i;
+		read_dat = 1;
+		/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
+		if (spi_eeprom_read(RBTX4938_SEEPROM1_CHIPID,
+				    0, dat, sizeof(dat))) {
+			printk(KERN_ERR "seeprom: read error.\n");
+		} else {
+			if (strcmp(dat, "MAC") != 0)
+				printk(KERN_WARNING "seeprom: bad signature.\n");
+			for (i = 0, sum = 0; i < sizeof(dat); i++)
+				sum += dat[i];
+			if (sum)
+				printk(KERN_WARNING "seeprom: bad checksum.\n");
+		}
+	}
+	memcpy(addr, &dat[4 + 6 * ch], 6);
+	return 0;
+}
+#endif /* CONFIG_PCI */
+
+extern void __init txx9_spi_init(unsigned long base, int (*cs_func)(int chipid, int on));
+static void __init rbtx4938_spi_setup(void)
+{
+	/* set SPI_SEL */
+	tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL;
+	/* chip selects for SPI devices */
+	tx4938_pioptr->dout |= (1 << SEEPROM1_CS);
+	tx4938_pioptr->dir |= (1 << SEEPROM1_CS);
+	txx9_spi_init(TX4938_SPI_REG, rbtx4938_spi_cs_func);
+}
+
+static struct resource rbtx4938_fpga_resource;
+
+static char pcode_str[8];
+static struct resource tx4938_reg_resource = {
+	pcode_str, TX4938_REG_BASE, TX4938_REG_BASE+TX4938_REG_SIZE, IORESOURCE_MEM
+};
+
+void __init tx4938_board_setup(void)
+{
+	int i;
+	unsigned long divmode;
+	int cpuclk = 0;
+	unsigned long pcode = TX4938_REV_PCODE();
+
+	ioport_resource.start = 0x1000;
+	ioport_resource.end = 0xffffffff;
+	iomem_resource.start = 0x1000;
+	iomem_resource.end = 0xffffffff;	/* expand to 4GB */
+
+	sprintf(pcode_str, "TX%lx", pcode);
+	/* SDRAMC,EBUSC are configured by PROM */
+	for (i = 0; i < 8; i++) {
+		if (!(tx4938_ebuscptr->cr[i] & 0x8))
+			continue;	/* disabled */
+ 		rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i);
+		txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i));
+	}
+
+	/* clocks */
+	if (txx9_master_clock) {
+		/* calculate gbus_clock and cpu_clock from master_clock */
+		divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_8:
+		case TX4938_CCFG_DIVMODE_10:
+		case TX4938_CCFG_DIVMODE_12:
+		case TX4938_CCFG_DIVMODE_16:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_gbus_clock = txx9_master_clock * 4; break;
+		default:
+			txx9_gbus_clock = txx9_master_clock;
+		}
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_2:
+		case TX4938_CCFG_DIVMODE_8:
+			cpuclk = txx9_gbus_clock * 2; break;
+		case TX4938_CCFG_DIVMODE_2_5:
+		case TX4938_CCFG_DIVMODE_10:
+			cpuclk = txx9_gbus_clock * 5 / 2; break;
+		case TX4938_CCFG_DIVMODE_3:
+		case TX4938_CCFG_DIVMODE_12:
+			cpuclk = txx9_gbus_clock * 3; break;
+		case TX4938_CCFG_DIVMODE_4:
+		case TX4938_CCFG_DIVMODE_16:
+			cpuclk = txx9_gbus_clock * 4; break;
+		case TX4938_CCFG_DIVMODE_4_5:
+		case TX4938_CCFG_DIVMODE_18:
+			cpuclk = txx9_gbus_clock * 9 / 2; break;
+		}
+		txx9_cpu_clock = cpuclk;
+	} else {
+		if (txx9_cpu_clock == 0) {
+			txx9_cpu_clock = 300000000;	/* 300MHz */
+		}
+		/* calculate gbus_clock and master_clock from cpu_clock */
+		cpuclk = txx9_cpu_clock;
+		divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_2:
+		case TX4938_CCFG_DIVMODE_8:
+			txx9_gbus_clock = cpuclk / 2; break;
+		case TX4938_CCFG_DIVMODE_2_5:
+		case TX4938_CCFG_DIVMODE_10:
+			txx9_gbus_clock = cpuclk * 2 / 5; break;
+		case TX4938_CCFG_DIVMODE_3:
+		case TX4938_CCFG_DIVMODE_12:
+			txx9_gbus_clock = cpuclk / 3; break;
+		case TX4938_CCFG_DIVMODE_4:
+		case TX4938_CCFG_DIVMODE_16:
+			txx9_gbus_clock = cpuclk / 4; break;
+		case TX4938_CCFG_DIVMODE_4_5:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_gbus_clock = cpuclk * 2 / 9; break;
+		}
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_8:
+		case TX4938_CCFG_DIVMODE_10:
+		case TX4938_CCFG_DIVMODE_12:
+		case TX4938_CCFG_DIVMODE_16:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_master_clock = txx9_gbus_clock / 4; break;
+		default:
+			txx9_master_clock = txx9_gbus_clock;
+		}
+	}
+	/* change default value to udelay/mdelay take reasonable time */
+	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+	/* CCFG */
+	/* clear WatchDogReset,BusErrorOnWrite flag (W1C) */
+	tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW;
+	/* clear PCIC1 reset */
+	if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST)
+		tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
+
+	/* enable Timeout BusError */
+	if (tx4938_ccfg_toeon)
+		tx4938_ccfgptr->ccfg |= TX4938_CCFG_TOE;
+
+	/* DMA selection */
+	tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_DMASEL_ALL;
+
+	/* Use external clock for external arbiter */
+	if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB))
+		tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_PCICLKEN_ALL;
+
+	printk("%s -- %dMHz(M%dMHz) CRIR:%08lx CCFG:%Lx PCFG:%Lx\n",
+	       pcode_str,
+	       cpuclk / 1000000, txx9_master_clock / 1000000,
+	       (unsigned long)tx4938_ccfgptr->crir,
+	       tx4938_ccfgptr->ccfg,
+	       tx4938_ccfgptr->pcfg);
+
+	printk("%s SDRAMC --", pcode_str);
+	for (i = 0; i < 4; i++) {
+		unsigned long long cr = tx4938_sdramcptr->cr[i];
+		unsigned long ram_base, ram_size;
+		if (!((unsigned long)cr & 0x00000400))
+			continue;	/* disabled */
+		ram_base = (unsigned long)(cr >> 49) << 21;
+		ram_size = ((unsigned long)(cr >> 33) + 1) << 21;
+		if (ram_base >= 0x20000000)
+			continue;	/* high memory (ignore) */
+		printk(" CR%d:%016Lx", i, cr);
+		txboard_add_phys_region(ram_base, ram_size);
+	}
+	printk(" TR:%09Lx\n", tx4938_sdramcptr->tr);
+
+	/* SRAM */
+	if (pcode == 0x4938 && tx4938_sramcptr->cr & 1) {
+		unsigned int size = 0x800;
+		unsigned long base =
+			(tx4938_sramcptr->cr >> (39-11)) & ~(size - 1);
+		 txboard_add_phys_region(base, size);
+	}
+
+	/* IRC */
+	/* disable interrupt control */
+	tx4938_ircptr->cer = 0;
+
+	/* TMR */
+	/* disable all timers */
+	for (i = 0; i < TX4938_NR_TMR; i++) {
+		tx4938_tmrptr(i)->tcr  = 0x00000020;
+		tx4938_tmrptr(i)->tisr = 0;
+		tx4938_tmrptr(i)->cpra = 0xffffffff;
+		tx4938_tmrptr(i)->itmr = 0;
+		tx4938_tmrptr(i)->ccdr = 0;
+		tx4938_tmrptr(i)->pgmr = 0;
+	}
+
+	/* enable DMA */
+	TX4938_WR64(0xff1fb150, TX4938_DMA_MCR_MSTEN);
+	TX4938_WR64(0xff1fb950, TX4938_DMA_MCR_MSTEN);
+
+	/* PIO */
+	tx4938_pioptr->maskcpu = 0;
+	tx4938_pioptr->maskext = 0;
+
+	/* TX4938 internal registers */
+	if (request_resource(&iomem_resource, &tx4938_reg_resource))
+		printk("request resource for internal registers failed\n");
+}
+
+#ifdef CONFIG_PCI
+static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr)
+{
+	unsigned short pcistatus = (unsigned short)(pcicptr->pcistatus >> 16);
+	unsigned long g2pstatus = pcicptr->g2pstatus;
+	unsigned long pcicstatus = pcicptr->pcicstatus;
+	static struct {
+		unsigned long flag;
+		const char *str;
+	} pcistat_tbl[] = {
+		{ PCI_STATUS_DETECTED_PARITY,	"DetectedParityError" },
+		{ PCI_STATUS_SIG_SYSTEM_ERROR,	"SignaledSystemError" },
+		{ PCI_STATUS_REC_MASTER_ABORT,	"ReceivedMasterAbort" },
+		{ PCI_STATUS_REC_TARGET_ABORT,	"ReceivedTargetAbort" },
+		{ PCI_STATUS_SIG_TARGET_ABORT,	"SignaledTargetAbort" },
+		{ PCI_STATUS_PARITY,	"MasterParityError" },
+	}, g2pstat_tbl[] = {
+		{ TX4938_PCIC_G2PSTATUS_TTOE,	"TIOE" },
+		{ TX4938_PCIC_G2PSTATUS_RTOE,	"RTOE" },
+	}, pcicstat_tbl[] = {
+		{ TX4938_PCIC_PCICSTATUS_PME,	"PME" },
+		{ TX4938_PCIC_PCICSTATUS_TLB,	"TLB" },
+		{ TX4938_PCIC_PCICSTATUS_NIB,	"NIB" },
+		{ TX4938_PCIC_PCICSTATUS_ZIB,	"ZIB" },
+		{ TX4938_PCIC_PCICSTATUS_PERR,	"PERR" },
+		{ TX4938_PCIC_PCICSTATUS_SERR,	"SERR" },
+		{ TX4938_PCIC_PCICSTATUS_GBE,	"GBE" },
+		{ TX4938_PCIC_PCICSTATUS_IWB,	"IWB" },
+	};
+	int i;
+
+	printk("pcistat:%04x(", pcistatus);
+	for (i = 0; i < ARRAY_SIZE(pcistat_tbl); i++)
+		if (pcistatus & pcistat_tbl[i].flag)
+			printk("%s ", pcistat_tbl[i].str);
+	printk("), g2pstatus:%08lx(", g2pstatus);
+	for (i = 0; i < ARRAY_SIZE(g2pstat_tbl); i++)
+		if (g2pstatus & g2pstat_tbl[i].flag)
+			printk("%s ", g2pstat_tbl[i].str);
+	printk("), pcicstatus:%08lx(", pcicstatus);
+	for (i = 0; i < ARRAY_SIZE(pcicstat_tbl); i++)
+		if (pcicstatus & pcicstat_tbl[i].flag)
+			printk("%s ", pcicstat_tbl[i].str);
+	printk(")\n");
+}
+
+void tx4938_report_pcic_status(void)
+{
+	int i;
+	struct tx4938_pcic_reg *pcicptr;
+	for (i = 0; (pcicptr = get_tx4938_pcicptr(i)) != NULL; i++)
+		tx4938_report_pcic_status1(pcicptr);
+}
+
+#endif /* CONFIG_PCI */
+
+/* We use onchip r4k counter or TMR timer as our system wide timer
+ * interrupt running at 100HZ. */
+
+extern void __init rtc_rx5c348_init(int chipid);
+void __init rbtx4938_time_init(void)
+{
+	rtc_rx5c348_init(RBTX4938_SRTC_CHIPID);
+	mips_hpt_frequency = txx9_cpu_clock / 2;
+}
+
+void __init toshiba_rbtx4938_setup(void)
+{
+	unsigned long long pcfg;
+	char *argptr;
+
+	iomem_resource.end = 0xffffffff;	/* 4GB */
+
+	if (txx9_master_clock == 0)
+		txx9_master_clock = 25000000; /* 25MHz */
+	tx4938_board_setup();
+	/* setup irq stuff */
+	TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM0), 0x00000000);	/* irq trigger */
+	TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM1), 0x00000000);	/* irq trigger */
+	/* setup serial stuff */
+	TX4938_WR(0xff1ff314, 0x00000000);	/* h/w flow control off */
+	TX4938_WR(0xff1ff414, 0x00000000);	/* h/w flow control off */
+
+#ifndef CONFIG_PCI
+	set_io_port_base(RBTX4938_ETHER_BASE);
+#endif
+
+#ifdef CONFIG_SERIAL_TXX9
+	{
+		extern int early_serial_txx9_setup(struct uart_port *port);
+		int i;
+		struct uart_port req;
+		for(i = 0; i < 2; i++) {
+			memset(&req, 0, sizeof(req));
+			req.line = i;
+			req.iotype = UPIO_MEM;
+			req.membase = (char *)(0xff1ff300 + i * 0x100);
+			req.mapbase = 0xff1ff300 + i * 0x100;
+			req.irq = 32 + i;
+			req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+			req.uartclk = 50000000;
+			early_serial_txx9_setup(&req);
+		}
+	}
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+        argptr = prom_getcmdline();
+        if (strstr(argptr, "console=") == NULL) {
+                strcat(argptr, " console=ttyS0,38400");
+        }
+#endif
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
+	printk("PIOSEL: disabling both ata and nand selection\n");
+	local_irq_disable();
+	tx4938_ccfgptr->pcfg &= ~(TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
+	printk("PIOSEL: enabling nand selection\n");
+	tx4938_ccfgptr->pcfg |= TX4938_PCFG_NDF_SEL;
+	tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_ATA_SEL;
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
+	printk("PIOSEL: enabling ata selection\n");
+	tx4938_ccfgptr->pcfg |= TX4938_PCFG_ATA_SEL;
+	tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_NDF_SEL;
+#endif
+
+#ifdef CONFIG_IP_PNP
+	argptr = prom_getcmdline();
+	if (strstr(argptr, "ip=") == NULL) {
+		strcat(argptr, " ip=any");
+	}
+#endif
+
+
+#ifdef CONFIG_FB
+	{
+		conswitchp = &dummy_con;
+	}
+#endif
+
+	rbtx4938_spi_setup();
+	pcfg = tx4938_ccfgptr->pcfg;	/* updated */
+	/* fixup piosel */
+	if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
+	    TX4938_PCFG_ATA_SEL) {
+		*rbtx4938_piosel_ptr = (*rbtx4938_piosel_ptr & 0x03) | 0x04;
+	}
+	else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
+	    TX4938_PCFG_NDF_SEL) {
+		*rbtx4938_piosel_ptr = (*rbtx4938_piosel_ptr & 0x03) | 0x08;
+	}
+	else {
+		*rbtx4938_piosel_ptr &= ~(0x08 | 0x04);
+	}
+
+	rbtx4938_fpga_resource.name = "FPGA Registers";
+	rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
+	rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
+	rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	if (request_resource(&iomem_resource, &rbtx4938_fpga_resource))
+		printk("request resource for fpga failed\n");
+
+	/* disable all OnBoard I/O interrupts */
+	*rbtx4938_imask_ptr = 0;
+
+	_machine_restart = rbtx4938_machine_restart;
+	_machine_halt = rbtx4938_machine_halt;
+	_machine_power_off = rbtx4938_machine_power_off;
+
+	*rbtx4938_led_ptr = 0xff;
+	printk("RBTX4938 --- FPGA(Rev %02x)", *rbtx4938_fpga_rev_ptr);
+	printk(" DIPSW:%02x,%02x\n",
+	       *rbtx4938_dipsw_ptr, *rbtx4938_bdipsw_ptr);
+}
+
+#ifdef CONFIG_PROC_FS
+extern void spi_eeprom_proc_create(struct proc_dir_entry *dir, int chipid);
+static int __init tx4938_spi_proc_setup(void)
+{
+	struct proc_dir_entry *tx4938_spi_eeprom_dir;
+
+	tx4938_spi_eeprom_dir = proc_mkdir("spi_eeprom", 0);
+
+	if (!tx4938_spi_eeprom_dir)
+		return -ENOMEM;
+
+	/* don't allow user access to RBTX4938_SEEPROM1_CHIPID
+	 * as it contains eth0 and eth1 MAC addresses
+	 */
+	spi_eeprom_proc_create(tx4938_spi_eeprom_dir, RBTX4938_SEEPROM2_CHIPID);
+	spi_eeprom_proc_create(tx4938_spi_eeprom_dir, RBTX4938_SEEPROM3_CHIPID);
+
+	return 0;
+}
+
+__initcall(tx4938_spi_proc_setup);
+#endif
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c b/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
new file mode 100644
index 000000000000..951a208ee9b3
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
@@ -0,0 +1,219 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
+#include <asm/tx4938/spi.h>
+#include <asm/tx4938/tx4938.h>
+
+/* ATMEL 250x0 instructions */
+#define	ATMEL_WREN	0x06
+#define	ATMEL_WRDI	0x04
+#define ATMEL_RDSR	0x05
+#define ATMEL_WRSR	0x01
+#define	ATMEL_READ	0x03
+#define	ATMEL_WRITE	0x02
+
+#define ATMEL_SR_BSY	0x01
+#define ATMEL_SR_WEN	0x02
+#define ATMEL_SR_BP0	0x04
+#define ATMEL_SR_BP1	0x08
+
+DEFINE_SPINLOCK(spi_eeprom_lock);
+
+static struct spi_dev_desc seeprom_dev_desc = {
+	.baud 		= 1500000,	/* 1.5Mbps */
+	.tcss		= 1,
+	.tcsh		= 1,
+	.tcsr		= 1,
+	.byteorder	= 1,		/* MSB-First */
+	.polarity	= 0,		/* High-Active */
+	.phase		= 0,		/* Sample-Then-Shift */
+
+};
+static inline int
+spi_eeprom_io(int chipid,
+	      unsigned char **inbufs, unsigned int *incounts,
+	      unsigned char **outbufs, unsigned int *outcounts)
+{
+	return txx9_spi_io(chipid, &seeprom_dev_desc,
+			   inbufs, incounts, outbufs, outcounts, 0);
+}
+
+int spi_eeprom_write_enable(int chipid, int enable)
+{
+	unsigned char inbuf[1];
+	unsigned char *inbufs[1];
+	unsigned int incounts[2];
+	unsigned long flags;
+	int stat;
+	inbuf[0] = enable ? ATMEL_WREN : ATMEL_WRDI;
+	inbufs[0] = inbuf;
+	incounts[0] = sizeof(inbuf);
+	incounts[1] = 0;
+	spin_lock_irqsave(&spi_eeprom_lock, flags);
+	stat = spi_eeprom_io(chipid, inbufs, incounts, NULL, NULL);
+	spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+	return stat;
+}
+
+static int spi_eeprom_read_status_nolock(int chipid)
+{
+	unsigned char inbuf[2], outbuf[2];
+	unsigned char *inbufs[1], *outbufs[1];
+	unsigned int incounts[2], outcounts[2];
+	int stat;
+	inbuf[0] = ATMEL_RDSR;
+	inbuf[1] = 0;
+	inbufs[0] = inbuf;
+	incounts[0] = sizeof(inbuf);
+	incounts[1] = 0;
+	outbufs[0] = outbuf;
+	outcounts[0] = sizeof(outbuf);
+	outcounts[1] = 0;
+	stat = spi_eeprom_io(chipid, inbufs, incounts, outbufs, outcounts);
+	if (stat < 0)
+		return stat;
+	return outbuf[1];
+}
+
+int spi_eeprom_read_status(int chipid)
+{
+	unsigned long flags;
+	int stat;
+	spin_lock_irqsave(&spi_eeprom_lock, flags);
+	stat = spi_eeprom_read_status_nolock(chipid);
+	spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+	return stat;
+}
+
+int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len)
+{
+	unsigned char inbuf[2];
+	unsigned char *inbufs[2], *outbufs[2];
+	unsigned int incounts[2], outcounts[3];
+	unsigned long flags;
+	int stat;
+	inbuf[0] = ATMEL_READ;
+	inbuf[1] = address;
+	inbufs[0] = inbuf;
+	inbufs[1] = NULL;
+	incounts[0] = sizeof(inbuf);
+	incounts[1] = 0;
+	outbufs[0] = NULL;
+	outbufs[1] = buf;
+	outcounts[0] = 2;
+	outcounts[1] = len;
+	outcounts[2] = 0;
+	spin_lock_irqsave(&spi_eeprom_lock, flags);
+	stat = spi_eeprom_io(chipid, inbufs, incounts, outbufs, outcounts);
+	spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+	return stat;
+}
+
+int spi_eeprom_write(int chipid, int address, unsigned char *buf, int len)
+{
+	unsigned char inbuf[2];
+	unsigned char *inbufs[2];
+	unsigned int incounts[3];
+	unsigned long flags;
+	int i, stat;
+
+	if (address / 8 != (address + len - 1) / 8)
+		return -EINVAL;
+	stat = spi_eeprom_write_enable(chipid, 1);
+	if (stat < 0)
+		return stat;
+	stat = spi_eeprom_read_status(chipid);
+	if (stat < 0)
+		return stat;
+	if (!(stat & ATMEL_SR_WEN))
+		return -EPERM;
+
+	inbuf[0] = ATMEL_WRITE;
+	inbuf[1] = address;
+	inbufs[0] = inbuf;
+	inbufs[1] = buf;
+	incounts[0] = sizeof(inbuf);
+	incounts[1] = len;
+	incounts[2] = 0;
+	spin_lock_irqsave(&spi_eeprom_lock, flags);
+	stat = spi_eeprom_io(chipid, inbufs, incounts, NULL, NULL);
+	if (stat < 0)
+		goto unlock_return;
+
+	/* write start.  max 10ms */
+	for (i = 10; i > 0; i--) {
+		int stat = spi_eeprom_read_status_nolock(chipid);
+		if (stat < 0)
+			goto unlock_return;
+		if (!(stat & ATMEL_SR_BSY))
+			break;
+		mdelay(1);
+	}
+	spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+	if (i == 0)
+		return -EIO;
+	return len;
+ unlock_return:
+	spin_unlock_irqrestore(&spi_eeprom_lock, flags);
+	return stat;
+}
+
+#ifdef CONFIG_PROC_FS
+#define MAX_SIZE	0x80	/* for ATMEL 25010 */
+static int spi_eeprom_read_proc(char *page, char **start, off_t off,
+				int count, int *eof, void *data)
+{
+	unsigned int size = MAX_SIZE;
+	if (spi_eeprom_read((int)data, 0, (unsigned char *)page, size) < 0)
+		size = 0;
+	return size;
+}
+
+static int spi_eeprom_write_proc(struct file *file, const char *buffer,
+				 unsigned long count, void *data)
+{
+	unsigned int size = MAX_SIZE;
+	int i;
+	if (file->f_pos >= size)
+		return -EIO;
+	if (file->f_pos + count > size)
+		count = size - file->f_pos;
+	for (i = 0; i < count; i += 8) {
+		int len = count - i < 8 ? count - i : 8;
+		if (spi_eeprom_write((int)data, file->f_pos,
+				     (unsigned char *)buffer, len) < 0) {
+			count = -EIO;
+			break;
+		}
+		buffer += len;
+		file->f_pos += len;
+	}
+	return count;
+}
+
+__init void spi_eeprom_proc_create(struct proc_dir_entry *dir, int chipid)
+{
+	struct proc_dir_entry *entry;
+	char name[128];
+	sprintf(name, "seeprom-%d", chipid);
+	entry = create_proc_entry(name, 0600, dir);
+	if (entry) {
+		entry->read_proc = spi_eeprom_read_proc;
+		entry->write_proc = spi_eeprom_write_proc;
+		entry->data = (void *)chipid;
+	}
+}
+#endif /* CONFIG_PROC_FS */
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c b/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c
new file mode 100644
index 000000000000..fae3136f462d
--- /dev/null
+++ b/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c
@@ -0,0 +1,159 @@
+/*
+ * linux/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <asm/tx4938/spi.h>
+#include <asm/tx4938/tx4938.h>
+
+static int (*txx9_spi_cs_func)(int chipid, int on);
+static DEFINE_SPINLOCK(txx9_spi_lock);
+
+extern unsigned int txx9_gbus_clock;
+
+#define SPI_FIFO_SIZE	4
+
+void __init txx9_spi_init(unsigned long base, int (*cs_func)(int chipid, int on))
+{
+	txx9_spi_cs_func = cs_func;
+	/* enter config mode */
+	tx4938_spiptr->mcr = TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR;
+}
+
+static DECLARE_WAIT_QUEUE_HEAD(txx9_spi_wait);
+static void txx9_spi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	/* disable rx intr */
+	tx4938_spiptr->cr0 &= ~TXx9_SPCR0_RBSIE;
+	wake_up(&txx9_spi_wait);
+}
+static struct irqaction txx9_spi_action = {
+	txx9_spi_interrupt, 0, 0, "spi", NULL, NULL,
+};
+
+void __init txx9_spi_irqinit(int irc_irq)
+{
+	setup_irq(irc_irq, &txx9_spi_action);
+}
+
+int txx9_spi_io(int chipid, struct spi_dev_desc *desc,
+		unsigned char **inbufs, unsigned int *incounts,
+		unsigned char **outbufs, unsigned int *outcounts,
+		int cansleep)
+{
+	unsigned int incount, outcount;
+	unsigned char *inp, *outp;
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&txx9_spi_lock, flags);
+	if ((tx4938_spiptr->mcr & TXx9_SPMCR_OPMODE) == TXx9_SPMCR_ACTIVE) {
+		spin_unlock_irqrestore(&txx9_spi_lock, flags);
+		return -EBUSY;
+	}
+	/* enter config mode */
+	tx4938_spiptr->mcr = TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR;
+	tx4938_spiptr->cr0 =
+		(desc->byteorder ? TXx9_SPCR0_SBOS : 0) |
+		(desc->polarity ? TXx9_SPCR0_SPOL : 0) |
+		(desc->phase ? TXx9_SPCR0_SPHA : 0) |
+		0x08;
+	tx4938_spiptr->cr1 =
+		(((TXX9_IMCLK + desc->baud) / (2 * desc->baud) - 1) << 8) |
+		0x08 /* 8 bit only */;
+	/* enter active mode */
+	tx4938_spiptr->mcr = TXx9_SPMCR_ACTIVE;
+	spin_unlock_irqrestore(&txx9_spi_lock, flags);
+
+	/* CS ON */
+	if ((ret = txx9_spi_cs_func(chipid, 1)) < 0) {
+		spin_unlock_irqrestore(&txx9_spi_lock, flags);
+		return ret;
+	}
+	udelay(desc->tcss);
+
+	/* do scatter IO */
+	inp = inbufs ? *inbufs : NULL;
+	outp = outbufs ? *outbufs : NULL;
+	incount = 0;
+	outcount = 0;
+	while (1) {
+		unsigned char data;
+		unsigned int count;
+		int i;
+		if (!incount) {
+			incount = incounts ? *incounts++ : 0;
+			inp = (incount && inbufs) ? *inbufs++ : NULL;
+		}
+		if (!outcount) {
+			outcount = outcounts ? *outcounts++ : 0;
+			outp = (outcount && outbufs) ? *outbufs++ : NULL;
+		}
+		if (!inp && !outp)
+			break;
+		count = SPI_FIFO_SIZE;
+		if (incount)
+			count = min(count, incount);
+		if (outcount)
+			count = min(count, outcount);
+
+		/* now tx must be idle... */
+		while (!(tx4938_spiptr->sr & TXx9_SPSR_SIDLE))
+			;
+
+		tx4938_spiptr->cr0 =
+			(tx4938_spiptr->cr0 & ~TXx9_SPCR0_RXIFL_MASK) |
+			((count - 1) << 12);
+		if (cansleep) {
+			/* enable rx intr */
+			tx4938_spiptr->cr0 |= TXx9_SPCR0_RBSIE;
+		}
+		/* send */
+		for (i = 0; i < count; i++)
+			tx4938_spiptr->dr = inp ? *inp++ : 0;
+		/* wait all rx data */
+		if (cansleep) {
+			wait_event(txx9_spi_wait,
+				   tx4938_spiptr->sr & TXx9_SPSR_SRRDY);
+		} else {
+			while (!(tx4938_spiptr->sr & TXx9_SPSR_RBSI))
+				;
+		}
+		/* receive */
+		for (i = 0; i < count; i++) {
+			data = tx4938_spiptr->dr;
+			if (outp)
+				*outp++ = data;
+		}
+		if (incount)
+			incount -= count;
+		if (outcount)
+			outcount -= count;
+	}
+
+	/* CS OFF */
+	udelay(desc->tcsh);
+	txx9_spi_cs_func(chipid, 0);
+	udelay(desc->tcsr);
+
+	spin_lock_irqsave(&txx9_spi_lock, flags);
+	/* enter config mode */
+	tx4938_spiptr->mcr = TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR;
+	spin_unlock_irqrestore(&txx9_spi_lock, flags);
+
+	return 0;
+}
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
new file mode 100644
index 000000000000..a7add16c9aa4
--- /dev/null
+++ b/arch/mips/vr41xx/Kconfig
@@ -0,0 +1,88 @@
+config CASIO_E55
+	bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
+	depends on MACH_VR41XX
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select ISA
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config IBM_WORKPAD
+	bool "Support for IBM WorkPad z50"
+	depends on MACH_VR41XX
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select ISA
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config NEC_CMBVR4133
+	bool "Support for NEC CMB-VR4133"
+	depends on MACH_VR41XX
+	select CPU_VR41XX
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select HW_HAS_PCI
+
+config ROCKHOPPER
+	bool "Support for Rockhopper baseboard"
+	depends on NEC_CMBVR4133
+	select I8259
+	select HAVE_STD_PC_SERIAL_PORT
+
+config TANBAC_TB022X
+	bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
+	depends on MACH_VR41XX
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	help
+	  The TANBAC VR4131 multichip module(TB0225) and
+	  the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms
+	  manufactured by TANBAC.
+	  Please refer to <http://www.tanbac.co.jp/>
+	  about VR4131 multichip module and VR4131DIMM.
+
+config TANBAC_TB0226
+	bool "Support for TANBAC Mbase(TB0226)"
+	depends on TANBAC_TB022X
+	select GPIO_VR41XX
+	help
+	  The TANBAC Mbase(TB0226) is a MIPS-based platform
+	  manufactured by TANBAC.
+	  Please refer to <http://www.tanbac.co.jp/> about Mbase.
+
+config TANBAC_TB0287
+	bool "Support for TANBAC Mini-ITX DIMM base(TB0287)"
+	depends on TANBAC_TB022X
+	help
+	  The TANBAC Mini-ITX DIMM base(TB0287) is a MIPS-based platform
+	  manufactured by TANBAC.
+	  Please refer to <http://www.tanbac.co.jp/> about Mini-ITX DIMM base.
+
+config VICTOR_MPC30X
+	bool "Support for Victor MP-C303/304"
+	depends on MACH_VR41XX
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config ZAO_CAPCELLA
+	bool "Support for ZAO Networks Capcella"
+	depends on MACH_VR41XX
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config PCI_VR41XX
+	bool "Add PCI control unit support of NEC VR4100 series"
+	depends on MACH_VR41XX && HW_HAS_PCI
+	default y
+	select PCI
+
+config VRC4173
+	tristate "Add NEC VRC4173 companion chip support"
+	depends on MACH_VR41XX && PCI_VR41XX
+	help
+	  The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
diff --git a/arch/mips/vr41xx/common/cmu.c b/arch/mips/vr41xx/common/cmu.c
index fcd3cb8cdd9d..d758e432961b 100644
--- a/arch/mips/vr41xx/common/cmu.c
+++ b/arch/mips/vr41xx/common/cmu.c
@@ -69,7 +69,7 @@
 
 static void __iomem *cmu_base;
 static uint16_t cmuclkmsk, cmuclkmsk2;
-static spinlock_t cmu_lock;
+static DEFINE_SPINLOCK(cmu_lock);
 
 #define cmu_read(offset)		readw(cmu_base + (offset))
 #define cmu_write(offset, value)	writew((value), cmu_base + (offset))
diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c
index e03be896cbc4..578f6496ffd4 100644
--- a/arch/mips/vr41xx/common/init.c
+++ b/arch/mips/vr41xx/common/init.c
@@ -58,6 +58,14 @@ static void __init timer_init(void)
 	board_timer_setup = setup_timer_irq;
 }
 
+void __init plat_setup(void)
+{
+	vr41xx_calculate_clock_frequency();
+
+	timer_init();
+	iomem_resource_init();
+}
+
 void __init prom_init(void)
 {
 	int argc, i;
@@ -71,12 +79,6 @@ void __init prom_init(void)
 		if (i < (argc - 1))
 			strcat(arcs_cmdline, " ");
 	}
-
-	vr41xx_calculate_clock_frequency();
-
-	timer_init();
-
-	iomem_resource_init();
 }
 
 unsigned long __init prom_free_prom_memory (void)
diff --git a/arch/mips/vr41xx/common/vrc4173.c b/arch/mips/vr41xx/common/vrc4173.c
index ba58764ef8ea..462a9af30eef 100644
--- a/arch/mips/vr41xx/common/vrc4173.c
+++ b/arch/mips/vr41xx/common/vrc4173.c
@@ -81,8 +81,8 @@ EXPORT_SYMBOL(vrc4173_io_offset);
 static int vrc4173_initialized;
 static uint16_t vrc4173_cmuclkmsk;
 static uint16_t vrc4173_selectreg;
-static spinlock_t vrc4173_cmu_lock;
-static spinlock_t vrc4173_giu_lock;
+static DEFINE_SPINLOCK(vrc4173_cmu_lock);
+static DEFINE_SPINLOCK(vrc4173_giu_lock);
 
 static inline void set_cmusrst(uint16_t val)
 {
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/setup.c b/arch/mips/vr41xx/nec-cmbvr4133/setup.c
index db686ce42e85..53272a5c3cbe 100644
--- a/arch/mips/vr41xx/nec-cmbvr4133/setup.c
+++ b/arch/mips/vr41xx/nec-cmbvr4133/setup.c
@@ -56,7 +56,7 @@ static struct mtd_partition cmbvr4133_mtd_parts[] = {
 
 extern void i8259_init(void);
 
-static int __init nec_cmbvr4133_setup(void)
+static void __init nec_cmbvr4133_setup(void)
 {
 #ifdef CONFIG_ROCKHOPPER
 	extern void disable_pcnet(void);
@@ -90,7 +90,4 @@ static int __init nec_cmbvr4133_setup(void)
 #ifdef CONFIG_ROCKHOPPER
 	i8259_init();
 #endif
-	return 0;
 }
-
-early_initcall(nec_cmbvr4133_setup);
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 0b07922a2ac6..874a283edb95 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -47,10 +47,10 @@ config PM
 
 config ISA_DMA_API
 	bool
-	default y
 
 config ARCH_MAY_HAVE_PC_FDC
 	bool
+	depends on BROKEN
 	default y
 
 source "init/Kconfig"
@@ -154,13 +154,14 @@ config HOTPLUG_CPU
 
 config ARCH_DISCONTIGMEM_ENABLE
 	bool "Discontiguous memory support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	depends on 64BIT && EXPERIMENTAL
 	help
 	  Say Y to support efficient handling of discontiguous physical memory,
 	  for architectures which are either NUMA (Non-Uniform Memory Access)
 	  or have huge holes in the physical address space for other reasons.
 	  See <file:Documentation/vm/numa> for more.
 
+source "kernel/Kconfig.hz"
 source "mm/Kconfig"
 
 config PREEMPT
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 3b339b1cce13..9b7e42490dd1 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -20,7 +20,8 @@ NM		= sh $(srctree)/arch/parisc/nm
 CHECKFLAGS	+= -D__hppa__=1
 
 ifdef CONFIG_64BIT
-CROSS_COMPILE	:= hppa64-linux-
+CROSS_COMPILE	:= $(shell if [ -x /usr/bin/hppa64-linux-gnu-gcc ]; then \
+			echo hppa64-linux-gnu-; else echo hppa64-linux-; fi)
 UTS_MACHINE	:= parisc64
 CHECKFLAGS	+= -D__LP64__=1 -m64
 else
@@ -34,6 +35,14 @@ FINAL_LD=$(CROSS_COMPILE)ld --warn-common --warn-section-align
 
 OBJCOPY_FLAGS =-O binary -R .note -R .comment -S
 
+GCC_VERSION     := $(call cc-version)
+ifneq ($(shell if [ -z $(GCC_VERSION) ] ; then echo "bad"; fi ;),)
+$(error Sorry, couldn't find ($(cc-version)).)
+endif
+ifneq ($(shell if [ $(GCC_VERSION) -lt 0303 ] ; then echo "bad"; fi ;),)
+$(error Sorry, your compiler is too old ($(GCC_VERSION)).  GCC v3.3 or above is required.)
+endif
+
 cflags-y	:= -pipe
 
 # These flags should be implied by an hppa-linux configuration, but they
@@ -43,7 +52,7 @@ cflags-y	+= -mno-space-regs -mfast-indirect-calls
 # Currently we save and restore fpregs on all kernel entry/interruption paths.
 # If that gets optimized, we might need to disable the use of fpregs in the
 # kernel.
-#cflags-y	+= -mdisable-fpregs
+cflags-y	+= -mdisable-fpregs
 
 # Without this, "ld -r" results in .text sections that are too big
 # (> 0x40000) for branches to reach stubs.
diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
index 6efaa9293eef..3e013f55df64 100644
--- a/arch/parisc/configs/712_defconfig
+++ b/arch/parisc/configs/712_defconfig
@@ -1,12 +1,16 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-pa5
-# Wed Jan  5 13:20:32 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:04:34 2005
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
 CONFIG_STACK_GROWSUP=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 
 #
 # Code maturity level options
@@ -15,35 +19,40 @@ CONFIG_EXPERIMENTAL=y
 # CONFIG_CLEAN_COMPILE is not set
 CONFIG_BROKEN=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -65,9 +74,18 @@ CONFIG_PA7100LC=y
 # CONFIG_PA7300LC is not set
 # CONFIG_PA8X00 is not set
 CONFIG_PA11=y
-# CONFIG_64BIT is not set
 # CONFIG_SMP is not set
-# CONFIG_DISCONTIGMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_HPUX is not set
 
@@ -81,8 +99,6 @@ CONFIG_GSC_LASI=y
 # CONFIG_GSC_WAX is not set
 # CONFIG_EISA is not set
 # CONFIG_PCI is not set
-CONFIG_CHASSIS_LCD_LED=y
-# CONFIG_PDC_CHASSIS is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -90,12 +106,15 @@ CONFIG_CHASSIS_LCD_LED=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
+# PCI Hotplug Support
 #
 
 #
-# PCI Hotplug Support
+# PA-RISC specific drivers
 #
+CONFIG_CHASSIS_LCD_LED=y
+# CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_STABLE=y
 
 #
 # Executable file formats
@@ -104,137 +123,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_OTHER is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_PARIDE is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-CONFIG_SCSI_LASI700=y
-CONFIG_53C700_MEM_MAPPED=y
-CONFIG_53C700_LE_ON_BE=y
-# CONFIG_SCSI_ZALON is not set
-CONFIG_SCSI_DEBUG=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_RAID6 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -243,12 +132,14 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -262,8 +153,10 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 # CONFIG_INET_IPCOMP is not set
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 
 #
 # IP: Virtual Server Configuration
@@ -272,6 +165,7 @@ CONFIG_IP_TCPDIAG=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
 
 #
 # IP: Netfilter Configuration
@@ -279,11 +173,14 @@ CONFIG_NETFILTER=y
 CONFIG_IP_NF_CONNTRACK=m
 # CONFIG_IP_NF_CT_ACCT is not set
 CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -307,21 +204,23 @@ CONFIG_IP_NF_MATCH_OWNER=m
 # CONFIG_IP_NF_MATCH_ADDRTYPE is not set
 # CONFIG_IP_NF_MATCH_REALM is not set
 CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_SAME=m
-# CONFIG_IP_NF_NAT_LOCAL is not set
 CONFIG_IP_NF_NAT_SNMP_BASIC=m
 CONFIG_IP_NF_NAT_IRC=m
 CONFIG_IP_NF_NAT_FTP=m
@@ -333,6 +232,7 @@ CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -340,10 +240,11 @@ CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -362,10 +263,6 @@ CONFIG_LLC2=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -373,17 +270,162 @@ CONFIG_LLC2=m
 # Network testing
 #
 CONFIG_NET_PKTGEN=m
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_GSC=y
+# CONFIG_PARPORT_1284 is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=6144
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+CONFIG_SCSI_LASI700=y
+CONFIG_53C700_LE_ON_BE=y
+# CONFIG_SCSI_ZALON is not set
+CONFIG_SCSI_DEBUG=m
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -391,6 +433,7 @@ CONFIG_TUN=m
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 CONFIG_LASI_82596=y
+# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -414,6 +457,7 @@ CONFIG_NET_RADIO=y
 #
 # CONFIG_STRIP is not set
 # CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Wan interfaces
@@ -431,6 +475,8 @@ CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -460,19 +506,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_GSCPS2=y
-CONFIG_HP_SDC=y
-CONFIG_HIL_MLC=y
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -483,6 +516,7 @@ CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_HIL_OLD=y
 # CONFIG_KEYBOARD_HIL is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
@@ -494,6 +528,19 @@ CONFIG_MOUSE_HIL=m
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_GSCPS2=y
+CONFIG_HP_SDC=y
+CONFIG_HIL_MLC=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -511,7 +558,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -546,12 +592,14 @@ CONFIG_GEN_RTC_X=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -562,10 +610,20 @@ CONFIG_MAX_RAW_DEVS=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -579,28 +637,36 @@ CONFIG_MAX_RAW_DEVS=256
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_STI=y
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=128
 CONFIG_DUMMY_CONSOLE_ROWS=48
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_STI_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 # CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
 # CONFIG_FONT_PEARL_8x8 is not set
 # CONFIG_FONT_ACORN_8x8 is not set
 # CONFIG_FONT_MINI_4x6 is not set
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
 
 #
 # Logo configuration
@@ -610,6 +676,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_PARISC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -657,10 +724,6 @@ CONFIG_SND_HARMONY=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -671,10 +734,20 @@ CONFIG_SND_HARMONY=y
 # CONFIG_MMC is not set
 
 #
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
@@ -682,20 +755,24 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 CONFIG_JFS_FS=m
 # CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -722,14 +799,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-# CONFIG_TMPFS_SECURITY is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -754,16 +828,19 @@ CONFIG_UFS_FS=m
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
@@ -778,6 +855,7 @@ CONFIG_CIFS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -838,13 +916,19 @@ CONFIG_OPROFILE=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
 
 #
 # Security options
@@ -865,6 +949,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
@@ -882,9 +967,14 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_TEST=m
 
 #
+# Hardware crypto devices
+#
+
+#
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig
index 30fc03ed0cfb..955ef5084f3e 100644
--- a/arch/parisc/configs/a500_defconfig
+++ b/arch/parisc/configs/a500_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc4-pa1
-# Wed Feb 16 11:32:49 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:04:54 2005
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
@@ -10,6 +10,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 
 #
 # Code maturity level options
@@ -19,26 +20,32 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -48,6 +55,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -74,7 +82,19 @@ CONFIG_PREFETCH=y
 CONFIG_64BIT=y
 CONFIG_SMP=y
 CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_PREEMPT is not set
 CONFIG_COMPAT=y
 CONFIG_NR_CPUS=8
@@ -85,7 +105,7 @@ CONFIG_NR_CPUS=8
 # CONFIG_GSC is not set
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 CONFIG_PCI_LBA=y
 CONFIG_IOSAPIC=y
 CONFIG_IOMMU_SBA=y
@@ -96,6 +116,8 @@ CONFIG_IOMMU_SBA=y
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
+# CONFIG_PCMCIA_LOAD_CIS is not set
+CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -104,7 +126,6 @@ CONFIG_CARDBUS=y
 CONFIG_YENTA=m
 CONFIG_PD6729=m
 CONFIG_I82092=m
-CONFIG_TCIC=m
 CONFIG_PCCARD_NONSTATIC=m
 
 #
@@ -127,6 +148,203 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
+# CONFIG_IP6_NF_MATCH_OWNER is not set
+# CONFIG_IP6_NF_MATCH_MARK is not set
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+# CONFIG_IP6_NF_MATCH_LENGTH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
@@ -139,6 +357,11 @@ CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -169,7 +392,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=6144
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -189,6 +411,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -201,6 +424,7 @@ CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -215,6 +439,7 @@ CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=m
 CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
 
 #
 # SCSI low-level drivers
@@ -229,14 +454,12 @@ CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
@@ -246,8 +469,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
 # CONFIG_SCSI_QLOGIC_ISP is not set
 CONFIG_SCSI_QLOGIC_FC=m
 # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
@@ -258,7 +479,9 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA22XX is not set
 CONFIG_SCSI_QLA2300=m
 CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 CONFIG_SCSI_DEBUG=m
@@ -288,8 +511,11 @@ CONFIG_MD_RAID1=y
 #
 # Fusion MPT device support
 #
-CONFIG_FUSION=m
-CONFIG_FUSION_MAX_SGE=40
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
 CONFIG_FUSION_CTL=m
 
 #
@@ -303,153 +529,13 @@ CONFIG_FUSION_CTL=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
+# Network device support
 #
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -457,12 +543,18 @@ CONFIG_TUN=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=m
 CONFIG_TYPHOON=m
@@ -479,6 +571,7 @@ CONFIG_TULIP_MMIO=y
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 CONFIG_PCMCIA_XIRCOM=m
 # CONFIG_PCMCIA_XIRTULIP is not set
 CONFIG_HP100=m
@@ -489,48 +582,43 @@ CONFIG_PCNET32=m
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_DGRS is not set
-CONFIG_EEPRO100=m
+# CONFIG_EEPRO100 is not set
 CONFIG_E100=m
-CONFIG_E100_NAPI=y
 # CONFIG_FEALNX is not set
-CONFIG_NATSEMI=m
+# CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_8139TOO is not set
 # CONFIG_SIS900 is not set
-CONFIG_EPIC100=m
+# CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
+# CONFIG_VIA_RHINE is not set
 
 #
 # Ethernet (1000 Mbit)
 #
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_DL2K=m
+# CONFIG_DL2K is not set
 CONFIG_E1000=m
 CONFIG_E1000_NAPI=y
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=m
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
-CONFIG_IXGB=m
-CONFIG_IXGB_NAPI=y
-CONFIG_S2IO=m
-CONFIG_S2IO_NAPI=y
-# CONFIG_2BUFF_MODE is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
 
 #
 # Token Ring devices
@@ -560,6 +648,7 @@ CONFIG_PCMCIA_RAYCS=m
 CONFIG_HERMES=m
 CONFIG_PLX_HERMES=m
 CONFIG_TMD_HERMES=m
+# CONFIG_NORTEL_HERMES is not set
 CONFIG_PCI_HERMES=m
 # CONFIG_ATMEL is not set
 
@@ -567,6 +656,7 @@ CONFIG_PCI_HERMES=m
 # Wireless 802.11b Pcmcia/Cardbus cards support
 #
 CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
 CONFIG_AIRO_CS=m
 CONFIG_PCMCIA_WL3501=m
 
@@ -574,6 +664,7 @@ CONFIG_PCMCIA_WL3501=m
 # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
 #
 # CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 CONFIG_NET_WIRELESS=y
 
 #
@@ -607,6 +698,8 @@ CONFIG_PPP_BSDCOMP=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -633,13 +726,6 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -649,6 +735,12 @@ CONFIG_SOUND_GAMEPORT=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -667,7 +759,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -677,6 +768,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_PDC_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 
@@ -708,6 +800,11 @@ CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -718,10 +815,20 @@ CONFIG_MAX_RAW_DEVS=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -742,6 +849,7 @@ CONFIG_MAX_RAW_DEVS=256
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=160
 CONFIG_DUMMY_CONSOLE_ROWS=64
+# CONFIG_STI_CONSOLE is not set
 
 #
 # Sound
@@ -751,13 +859,9 @@ CONFIG_DUMMY_CONSOLE_ROWS=64
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -772,17 +876,18 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 # InfiniBand support
 #
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
@@ -794,22 +899,20 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -836,13 +939,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -867,15 +968,18 @@ CONFIG_UFS_FS=m
 #
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
@@ -890,6 +994,7 @@ CONFIG_CIFS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -906,15 +1011,15 @@ CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
+# CONFIG_NLS_CODEPAGE_852 is not set
 # CONFIG_NLS_CODEPAGE_855 is not set
 # CONFIG_NLS_CODEPAGE_857 is not set
 # CONFIG_NLS_CODEPAGE_860 is not set
 # CONFIG_NLS_CODEPAGE_861 is not set
 # CONFIG_NLS_CODEPAGE_862 is not set
-CONFIG_NLS_CODEPAGE_863=m
+# CONFIG_NLS_CODEPAGE_863 is not set
 # CONFIG_NLS_CODEPAGE_864 is not set
-CONFIG_NLS_CODEPAGE_865=m
+# CONFIG_NLS_CODEPAGE_865 is not set
 # CONFIG_NLS_CODEPAGE_866 is not set
 # CONFIG_NLS_CODEPAGE_869 is not set
 # CONFIG_NLS_CODEPAGE_936 is not set
@@ -926,10 +1031,10 @@ CONFIG_NLS_CODEPAGE_865=m
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
 # CONFIG_NLS_ISO8859_5 is not set
 # CONFIG_NLS_ISO8859_6 is not set
 # CONFIG_NLS_ISO8859_7 is not set
@@ -950,11 +1055,15 @@ CONFIG_OPROFILE=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_IOREMAP is not set
@@ -974,25 +1083,26 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_TEST=m
 
@@ -1004,6 +1114,7 @@ CONFIG_CRYPTO_TEST=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig
index 46c9511f3229..8819e7e6ae3f 100644
--- a/arch/parisc/configs/b180_defconfig
+++ b/arch/parisc/configs/b180_defconfig
@@ -1,12 +1,15 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-pa5
-# Wed Jan  5 13:35:54 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:06:10 2005
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
 CONFIG_STACK_GROWSUP=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Code maturity level options
@@ -14,33 +17,39 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_EXPERIMENTAL is not set
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -60,8 +69,14 @@ CONFIG_PA7100LC=y
 # CONFIG_PA7300LC is not set
 # CONFIG_PA8X00 is not set
 CONFIG_PA11=y
-# CONFIG_64BIT is not set
 # CONFIG_SMP is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_HPUX is not set
 
@@ -78,11 +93,25 @@ CONFIG_EISA_NAMES=y
 CONFIG_ISA=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 CONFIG_GSC_DINO=y
 # CONFIG_PCI_LBA is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# PA-RISC specific drivers
+#
 CONFIG_CHASSIS_LCD_LED=y
 # CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_STABLE=y
 
 #
 # Executable file formats
@@ -91,6 +120,64 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
@@ -99,9 +186,15 @@ CONFIG_BINFMT_ELF=y
 #
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -111,10 +204,8 @@ CONFIG_STANDALONE=y
 #
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_CML1=y
 # CONFIG_PARPORT_SERIAL is not set
 CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_OTHER is not set
 # CONFIG_PARPORT_1284 is not set
 
 #
@@ -125,19 +216,17 @@ CONFIG_PARPORT_GSC=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -149,6 +238,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=y
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -158,6 +248,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -170,6 +261,7 @@ CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -183,16 +275,16 @@ CONFIG_CHR_DEV_SG=y
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
 # CONFIG_SCSI_AHA1740 is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -202,14 +294,11 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_IN2000 is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
 # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_IPS is not set
@@ -219,7 +308,6 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_IMM is not set
 # CONFIG_SCSI_NCR53C406A is not set
 CONFIG_SCSI_LASI700=y
-CONFIG_53C700_MEM_MAPPED=y
 CONFIG_53C700_LE_ON_BE=y
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
@@ -231,7 +319,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_PAS16 is not set
 # CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -240,12 +327,12 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_SIM710 is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 
@@ -263,6 +350,7 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID5=y
+CONFIG_MD_RAID6=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
@@ -271,6 +359,9 @@ CONFIG_MD_RAID5=y
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -283,58 +374,8 @@ CONFIG_MD_RAID5=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -347,6 +388,11 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
@@ -354,8 +400,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_LASI_82596 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 
@@ -369,6 +415,7 @@ CONFIG_TULIP=y
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
@@ -384,12 +431,15 @@ CONFIG_TULIP=y
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -413,12 +463,12 @@ CONFIG_NET_RADIO=y
 #
 # Wireless 802.11b ISA/PCI cards support
 #
-# CONFIG_AIRO is not set
 # CONFIG_HERMES is not set
 
 #
 # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
 #
+# CONFIG_HOSTAP is not set
 CONFIG_NET_WIRELESS=y
 
 #
@@ -435,6 +485,8 @@ CONFIG_PPP=y
 # CONFIG_PPP_BSDCOMP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -464,23 +516,12 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_GSCPS2=y
-# CONFIG_HP_SDC is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
+# CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
@@ -488,7 +529,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_HIL_OLD is not set
 # CONFIG_KEYBOARD_HIL is not set
 CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
@@ -502,6 +543,19 @@ CONFIG_INPUT_MISC=y
 # CONFIG_HP_SDC_RTC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_GSCPS2=y
+# CONFIG_HP_SDC is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -519,8 +573,11 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
 
 #
 # Non-8250 serial port support
@@ -529,6 +586,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_PDC_CONSOLE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -555,11 +613,14 @@ CONFIG_GEN_RTC=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -570,10 +631,20 @@ CONFIG_GEN_RTC=y
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -587,6 +658,11 @@ CONFIG_GEN_RTC=y
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -595,6 +671,7 @@ CONFIG_FB=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 CONFIG_FB_STI=y
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_RADEON_OLD is not set
@@ -606,18 +683,19 @@ CONFIG_FB_STI=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=160
 CONFIG_DUMMY_CONSOLE_ROWS=64
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_STI_CONSOLE=y
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -630,6 +708,7 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_PARISC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -639,13 +718,9 @@ CONFIG_LOGO_PARISC_CLUT224=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -658,23 +733,36 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -697,11 +785,10 @@ CONFIG_JOLIET=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -719,15 +806,19 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -785,13 +876,19 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
 
 #
 # Security options
@@ -815,6 +912,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 # CONFIG_CRYPTO_DES is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
@@ -832,8 +930,13 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
+# Hardware crypto devices
+#
+
+#
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index 67aca6ccc9b0..9d86b6b1ebd1 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -1,12 +1,16 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-pa5
-# Wed Jan  5 13:26:49 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:06:31 2005
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
 CONFIG_STACK_GROWSUP=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 
 #
 # Code maturity level options
@@ -15,26 +19,31 @@ CONFIG_EXPERIMENTAL=y
 # CONFIG_CLEAN_COMPILE is not set
 CONFIG_BROKEN=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -44,6 +53,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -66,10 +76,19 @@ CONFIG_KMOD=y
 CONFIG_PA8X00=y
 CONFIG_PA20=y
 CONFIG_PREFETCH=y
-# CONFIG_PARISC64 is not set
 # CONFIG_64BIT is not set
 # CONFIG_SMP is not set
-# CONFIG_DISCONTIGMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_HPUX is not set
 
@@ -79,13 +98,10 @@ CONFIG_PREFETCH=y
 # CONFIG_GSC is not set
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 CONFIG_PCI_LBA=y
 CONFIG_IOSAPIC=y
 CONFIG_IOMMU_SBA=y
-CONFIG_SUPERIO=y
-CONFIG_CHASSIS_LCD_LED=y
-# CONFIG_PDC_CHASSIS is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -93,13 +109,17 @@ CONFIG_CHASSIS_LCD_LED=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
+# PCI Hotplug Support
 #
+# CONFIG_HOTPLUG_PCI is not set
 
 #
-# PCI Hotplug Support
+# PA-RISC specific drivers
 #
-# CONFIG_HOTPLUG_PCI is not set
+CONFIG_SUPERIO=y
+CONFIG_CHASSIS_LCD_LED=y
+# CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_STABLE=y
 
 #
 # Executable file formats
@@ -108,6 +128,186 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+CONFIG_NETFILTER_DEBUG=y
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_DCCP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
+CONFIG_IP6_NF_MATCH_OWNER=m
+# CONFIG_IP6_NF_MATCH_MARK is not set
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+CONFIG_IP6_NF_MATCH_LENGTH=m
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_RAW is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
@@ -120,6 +320,11 @@ CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -141,14 +346,14 @@ CONFIG_FW_LOADER=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_CRYPTOLOOP=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -158,6 +363,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -201,6 +407,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
 CONFIG_BLK_DEV_NS87415=y
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -218,6 +425,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -230,6 +438,7 @@ CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -242,7 +451,9 @@ CONFIG_SCSI_MULTI_LUN=y
 # SCSI Transport Attributes
 #
 CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -258,25 +469,26 @@ CONFIG_SCSI_FC_ATTRS=m
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_AHCI is not set
 # CONFIG_SCSI_SATA_SVW is not set
 CONFIG_SCSI_ATA_PIIX=m
+# CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
 CONFIG_SCSI_SATA_PROMISE=m
+# CONFIG_SCSI_SATA_QSTOR is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 CONFIG_SCSI_SATA_SIL=m
 # CONFIG_SCSI_SATA_SIS is not set
 # CONFIG_SCSI_SATA_ULI is not set
 CONFIG_SCSI_SATA_VIA=m
 # CONFIG_SCSI_SATA_VITESSE is not set
-# CONFIG_SCSI_BUSLOGIC is not set
+CONFIG_SCSI_SATA_INTEL_COMBINED=y
 # CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
@@ -286,20 +498,17 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
 # CONFIG_SCSI_QLOGIC_ISP is not set
-CONFIG_SCSI_QLOGIC_FC=m
-# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
-CONFIG_SCSI_QLOGIC_1280=m
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA21XX is not set
 # CONFIG_SCSI_QLA22XX is not set
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_QLA6322=m
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
@@ -316,19 +525,24 @@ CONFIG_MD_RAID1=y
 # CONFIG_MD_RAID10 is not set
 # CONFIG_MD_RAID5 is not set
 # CONFIG_MD_RAID6 is not set
-CONFIG_MD_MULTIPATH=y
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_EMC is not set
 
 #
 # Fusion MPT device support
 #
-CONFIG_FUSION=m
-CONFIG_FUSION_MAX_SGE=40
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
 CONFIG_FUSION_CTL=m
 
 #
@@ -342,151 +556,13 @@ CONFIG_FUSION_CTL=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_DEBUG=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_RAW is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-CONFIG_IP_NF_COMPAT_IPFWADM=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -494,12 +570,18 @@ CONFIG_TUN=m
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
-CONFIG_HAPPYMEAL=m
+# CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -514,28 +596,22 @@ CONFIG_TULIP_MMIO=y
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
+# CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
-CONFIG_ADAPTEC_STARFIRE=m
-# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
-CONFIG_B44=m
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_DGRS is not set
-CONFIG_EEPRO100=m
-# CONFIG_EEPRO100_PIO is not set
+# CONFIG_EEPRO100 is not set
 CONFIG_E100=m
-# CONFIG_E100_NAPI is not set
 # CONFIG_FEALNX is not set
-CONFIG_NATSEMI=m
+# CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_8139TOO is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -554,15 +630,18 @@ CONFIG_E1000=m
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=m
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
-CONFIG_IXGB=y
-CONFIG_IXGB_NAPI=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
 #
@@ -593,6 +672,8 @@ CONFIG_PPPOE=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -622,16 +703,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -649,6 +720,16 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -666,7 +747,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -676,6 +756,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_PDC_CONSOLE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -698,12 +779,16 @@ CONFIG_GEN_RTC_X=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
@@ -714,10 +799,20 @@ CONFIG_MAX_RAW_DEVS=256
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -731,6 +826,11 @@ CONFIG_MAX_RAW_DEVS=256
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -739,6 +839,7 @@ CONFIG_FB=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 CONFIG_FB_STI=y
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_RADEON_OLD is not set
@@ -751,18 +852,20 @@ CONFIG_FB_STI=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=160
 CONFIG_DUMMY_CONSOLE_ROWS=64
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_STI_CONSOLE=y
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -775,6 +878,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_PARISC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -784,7 +888,78 @@ CONFIG_SOUND=y
 #
 # Advanced Linux Sound Architecture
 #
-# CONFIG_SND is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_AD1889=y
+# CONFIG_SND_AD1889_OPL3 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
 
 #
 # Open Sound System
@@ -794,6 +969,8 @@ CONFIG_SOUND=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 
@@ -804,23 +981,23 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
 
@@ -829,12 +1006,11 @@ CONFIG_USB_PRINTER=m
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
 CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_HP8200e=y
+CONFIG_USB_STORAGE_USBAT=y
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
@@ -846,21 +1022,25 @@ CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
 # CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
-CONFIG_USB_AIPTEK=m
-CONFIG_USB_WACOM=m
-CONFIG_USB_KBTAB=m
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
 #
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-CONFIG_USB_HPUSBSCSI=m
 
 #
 # USB Multimedia devices
@@ -879,6 +1059,7 @@ CONFIG_USB_HPUSBSCSI=m
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -894,7 +1075,6 @@ CONFIG_USB_HPUSBSCSI=m
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 CONFIG_USB_LEGOTOWER=m
@@ -903,10 +1083,12 @@ CONFIG_USB_LEGOTOWER=m
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -920,27 +1102,41 @@ CONFIG_USB_LEGOTOWER=m
 # CONFIG_MMC is not set
 
 #
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -966,13 +1162,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -996,16 +1190,19 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -1014,6 +1211,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1074,13 +1272,19 @@ CONFIG_OPROFILE=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
 
 #
 # Security options
@@ -1092,21 +1296,22 @@ CONFIG_MAGIC_SYSRQ=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_HMAC is not set
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
+# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
 # CONFIG_CRYPTO_TEA is not set
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_KHAZAD is not set
@@ -1117,9 +1322,14 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_TEST=m
 
 #
+# Hardware crypto devices
+#
+
+#
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig
index fdae21c503d7..f38a4620d24f 100644
--- a/arch/parisc/defconfig
+++ b/arch/parisc/defconfig
@@ -1,38 +1,56 @@
 #
 # Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:01:33 2005
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
 CONFIG_STACK_GROWSUP=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=15
+# CONFIG_AUDIT is not set
 # CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -45,10 +63,21 @@ CONFIG_IOSCHED_DEADLINE=y
 CONFIG_PA7000=y
 # CONFIG_PA7100LC is not set
 # CONFIG_PA7200 is not set
+# CONFIG_PA7300LC is not set
 # CONFIG_PA8X00 is not set
 CONFIG_PA11=y
-# CONFIG_64BIT is not set
 # CONFIG_SMP is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_HPUX is not set
 
@@ -65,14 +94,29 @@ CONFIG_EISA_NAMES=y
 # CONFIG_ISA is not set
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 CONFIG_GSC_DINO=y
 CONFIG_PCI_LBA=y
 CONFIG_IOSAPIC=y
 CONFIG_IOMMU_SBA=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# PA-RISC specific drivers
+#
 CONFIG_SUPERIO=y
 CONFIG_CHASSIS_LCD_LED=y
 CONFIG_PDC_CHASSIS=y
+CONFIG_PDC_STABLE=y
 
 #
 # Executable file formats
@@ -81,15 +125,97 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
 #
 # Generic Driver Options
 #
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -99,12 +225,10 @@ CONFIG_BINFMT_ELF=y
 #
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_CML1=y
 # CONFIG_PARPORT_SERIAL is not set
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
 CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_OTHER is not set
 # CONFIG_PARPORT_1284 is not set
 
 #
@@ -114,18 +238,31 @@ CONFIG_PARPORT_GSC=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -135,6 +272,7 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -147,53 +285,59 @@ CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
 # CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 
 #
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
 # SCSI low-level drivers
 #
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AHA1740 is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_MEGARAID is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
 CONFIG_SCSI_LASI700=y
-CONFIG_53C700_MEM_MAPPED=y
 CONFIG_53C700_LE_ON_BE=y
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
 CONFIG_SCSI_ZALON=y
 CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
 CONFIG_SCSI_NCR53C8XX_SYNC=20
 # CONFIG_SCSI_NCR53C8XX_PROFILE is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -202,7 +346,8 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_SIM710 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -217,15 +362,20 @@ CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
+# CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID5=y
 # CONFIG_MD_RAID6 is not set
 # CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
 
 #
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -238,80 +388,23 @@ CONFIG_MD_RAID5=y
 # CONFIG_I2O is not set
 
 #
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
 CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
 # ARCnet devices
 #
 # CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -321,6 +414,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_LASI_82596=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
 
@@ -336,6 +430,7 @@ CONFIG_TULIP=y
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
@@ -361,30 +456,37 @@ CONFIG_NET_PCI=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
 #
-# CONFIG_ACENIC is not set
-CONFIG_DL2K=y
+CONFIG_ACENIC=y
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+# CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
 
 #
 # Wireless LAN (non-hamradio)
@@ -399,38 +501,30 @@ CONFIG_NET_RADIO=y
 #
 # Wireless 802.11b ISA/PCI cards support
 #
-CONFIG_AIRO=y
 # CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
-CONFIG_NET_WIRELESS=y
 
 #
-# Token Ring devices
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
 #
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
 
 #
 # Wan interfaces
 #
 # CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -460,51 +554,67 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_GSCPS2=y
-CONFIG_HP_SDC=y
-CONFIG_HIL_MLC=y
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_HIL_OLD=y
 CONFIG_KEYBOARD_HIL=y
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_MOUSE_HIL is not set
 CONFIG_INPUT_JOYSTICK=y
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
 # CONFIG_JOYSTICK_IFORCE is not set
 # CONFIG_JOYSTICK_WARRIOR is not set
 # CONFIG_JOYSTICK_MAGELLAN is not set
 # CONFIG_JOYSTICK_SPACEORB is not set
 # CONFIG_JOYSTICK_SPACEBALL is not set
 # CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDDLER is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
 # CONFIG_JOYSTICK_DB9 is not set
 # CONFIG_JOYSTICK_GAMECON is not set
 # CONFIG_JOYSTICK_TURBOGRAFX is not set
-# CONFIG_INPUT_JOYDUMP is not set
+# CONFIG_JOYSTICK_JOYDUMP is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_PCSPKR is not set
 # CONFIG_INPUT_UINPUT is not set
 CONFIG_HP_SDC_RTC=y
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_GSCPS2=y
+CONFIG_HP_SDC=y
+CONFIG_HIL_MLC=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -522,16 +632,16 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_MUX is not set
-# CONFIG_PDC_CONSOLE is not set
+CONFIG_SERIAL_MUX=y
+CONFIG_SERIAL_MUX_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -541,12 +651,6 @@ CONFIG_PRINTER=y
 # CONFIG_TIPAR is not set
 
 #
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
 # IPMI
 #
 # CONFIG_IPMI_HANDLER is not set
@@ -555,7 +659,6 @@ CONFIG_PRINTER=y
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -565,21 +668,40 @@ CONFIG_GEN_RTC=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
 
 #
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -593,34 +715,45 @@ CONFIG_GEN_RTC=y
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 CONFIG_FB_STI=y
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_RADEON_OLD is not set
 # CONFIG_FB_RADEON is not set
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=160
 CONFIG_DUMMY_CONSOLE_ROWS=64
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_PCI_CONSOLE=y
+CONFIG_STI_CONSOLE=y
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -629,6 +762,7 @@ CONFIG_FONT_8x16=y
 # Logo configuration
 #
 # CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -638,17 +772,94 @@ CONFIG_SOUND=y
 #
 # Advanced Linux Sound Architecture
 #
-# CONFIG_SND is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_AD1889=y
+# CONFIG_SND_AD1889_OPL3 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# GSC devices
+#
+CONFIG_SND_HARMONY=y
 
 #
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
-# CONFIG_SOUND_HARMONY is not set
 
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 
@@ -658,26 +869,36 @@ CONFIG_USB_DEBUG=y
 # CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
 
 #
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
 # CONFIG_USB_STORAGE is not set
 
 #
-# USB Human Interface Devices (HID)
+# USB Input Devices
 #
 # CONFIG_USB_HID is not set
 
@@ -688,16 +909,23 @@ CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_MOUSE is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
 
 #
 # USB Multimedia devices
@@ -709,13 +937,15 @@ CONFIG_USB_OHCI_HCD=y
 #
 
 #
-# USB Network adaptors
+# USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -732,12 +962,21 @@ CONFIG_USB_OHCI_HCD=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
 
 #
 # USB Gadget Support
@@ -745,22 +984,41 @@ CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_GADGET is not set
 
 #
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -773,7 +1031,8 @@ CONFIG_JOLIET=y
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
 # CONFIG_NTFS_FS is not set
 
 #
@@ -781,11 +1040,11 @@ CONFIG_JOLIET=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -809,23 +1068,28 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -861,6 +1125,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -885,17 +1150,24 @@ CONFIG_OPROFILE=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_RWLOCK is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
 
 #
 # Security options
 #
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #
@@ -909,6 +1181,8 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 # CONFIG_CRYPTO_DES is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
@@ -916,11 +1190,23 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_AES is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
 # CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_TEST is not set
 
 #
+# Hardware crypto devices
+#
+
+#
 # Library routines
 #
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index f46a07a79218..a065349aee37 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -27,6 +27,7 @@
 #include <asm/page.h>
 #include <asm/pgalloc.h>
 #include <asm/processor.h>
+#include <asm/sections.h>
 
 int split_tlb;
 int dcache_stride;
@@ -207,6 +208,9 @@ parisc_cache_init(void)
 
 	/* "New and Improved" version from Jim Hull 
 	 *	(1 << (cc_block-1)) * (cc_line << (4 + cnf.cc_shift))
+	 * The following CAFL_STRIDE is an optimized version, see
+	 * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023625.html
+	 * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023671.html
 	 */
 #define CAFL_STRIDE(cnf) (cnf.cc_line << (3 + cnf.cc_block + cnf.cc_shift))
 	dcache_stride = CAFL_STRIDE(cache_info.dc_conf);
@@ -266,7 +270,6 @@ void flush_dcache_page(struct page *page)
 	unsigned long offset;
 	unsigned long addr;
 	pgoff_t pgoff;
-	pte_t *pte;
 	unsigned long pfn = page_to_pfn(page);
 
 
@@ -297,21 +300,16 @@ void flush_dcache_page(struct page *page)
 		 * taking a page fault if the pte doesn't exist.
 		 * This is just for speed.  If the page translation
 		 * isn't there, there's no point exciting the
-		 * nadtlb handler into a nullification frenzy */
-
-
-  		if(!(pte = translation_exists(mpnt, addr)))
-			continue;
-
-		/* make sure we really have this page: the private
+		 * nadtlb handler into a nullification frenzy.
+		 *
+		 * Make sure we really have this page: the private
 		 * mappings may cover this area but have COW'd this
-		 * particular page */
-		if(pte_pfn(*pte) != pfn)
-  			continue;
-
-		__flush_cache_page(mpnt, addr);
-
-		break;
+		 * particular page.
+		 */
+  		if (translation_exists(mpnt, addr, pfn)) {
+			__flush_cache_page(mpnt, addr);
+			break;
+		}
 	}
 	flush_dcache_mmap_unlock(mapping);
 }
@@ -339,17 +337,15 @@ int parisc_cache_flush_threshold = FLUSH_THRESHOLD;
 void parisc_setup_cache_timing(void)
 {
 	unsigned long rangetime, alltime;
-	extern char _text;	/* start of kernel code, defined by linker */
-	extern char _end;	/* end of BSS, defined by linker */
 	unsigned long size;
 
 	alltime = mfctl(16);
 	flush_data_cache();
 	alltime = mfctl(16) - alltime;
 
-	size = (unsigned long)(&_end - _text);
+	size = (unsigned long)(_end - _text);
 	rangetime = mfctl(16);
-	flush_kernel_dcache_range((unsigned long)&_text, size);
+	flush_kernel_dcache_range((unsigned long)_text, size);
 	rangetime = mfctl(16) - rangetime;
 
 	printk(KERN_DEBUG "Whole cache flush %lu cycles, flushing %lu bytes %lu cycles\n",
diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c
index d34bbe7ae0e3..988844a169e6 100644
--- a/arch/parisc/kernel/drivers.c
+++ b/arch/parisc/kernel/drivers.c
@@ -46,36 +46,51 @@ static struct device root = {
 	.bus_id = "parisc",
 };
 
-#define for_each_padev(padev) \
-	for (padev = next_dev(&root); padev != NULL; \
-			padev = next_dev(&padev->dev))
+static inline int check_dev(struct device *dev)
+{
+	if (dev->bus == &parisc_bus_type) {
+		struct parisc_device *pdev;
+		pdev = to_parisc_device(dev);
+		return pdev->id.hw_type != HPHW_FAULTY;
+	}
+	return 1;
+}
+
+static struct device *
+parse_tree_node(struct device *parent, int index, struct hardware_path *modpath);
 
-#define check_dev(padev) \
-	(padev->id.hw_type != HPHW_FAULTY) ? padev : next_dev(&padev->dev)
+struct recurse_struct {
+	void * obj;
+	int (*fn)(struct device *, void *);
+};
+
+static int descend_children(struct device * dev, void * data)
+{
+	struct recurse_struct * recurse_data = (struct recurse_struct *)data;
+
+	if (recurse_data->fn(dev, recurse_data->obj))
+		return 1;
+	else
+		return device_for_each_child(dev, recurse_data, descend_children);
+}
 
 /**
- * next_dev - enumerates registered devices
- * @dev: the previous device returned from next_dev
+ *	for_each_padev - Iterate over all devices in the tree
+ *	@fn:	Function to call for each device.
+ *	@data:	Data to pass to the called function.
  *
- * next_dev does a depth-first search of the tree, returning parents
- * before children.  Returns NULL when there are no more devices.
+ *	This performs a depth-first traversal of the tree, calling the
+ *	function passed for each node.  It calls the function for parents
+ *	before children.
  */
-static struct parisc_device *next_dev(struct device *dev)
-{
-	if (!list_empty(&dev->children)) {
-		dev = list_to_dev(dev->children.next);
-		return check_dev(to_parisc_device(dev));
-	}
 
-	while (dev != &root) {
-		if (dev->node.next != &dev->parent->children) {
-			dev = list_to_dev(dev->node.next);
-			return to_parisc_device(dev);
-		}
-		dev = dev->parent;
-	}
-
-	return NULL;
+static int for_each_padev(int (*fn)(struct device *, void *), void * data)
+{
+	struct recurse_struct recurse_data = {
+		.obj	= data,
+		.fn	= fn,
+	};
+	return device_for_each_child(&root, &recurse_data, descend_children);
 }
 
 /**
@@ -105,12 +120,6 @@ static int match_device(struct parisc_driver *driver, struct parisc_device *dev)
 	return 0;
 }
 
-static void claim_device(struct parisc_driver *driver, struct parisc_device *dev)
-{
-	dev->driver = driver;
-	request_mem_region(dev->hpa, 0x1000, driver->name);
-}
-
 static int parisc_driver_probe(struct device *dev)
 {
 	int rc;
@@ -119,8 +128,8 @@ static int parisc_driver_probe(struct device *dev)
 
 	rc = pa_drv->probe(pa_dev);
 
-	if(!rc)
-		claim_device(pa_drv, pa_dev);
+	if (!rc)
+		pa_dev->driver = pa_drv;
 
 	return rc;
 }
@@ -131,7 +140,6 @@ static int parisc_driver_remove(struct device *dev)
 	struct parisc_driver *pa_drv = to_parisc_driver(dev->driver);
 	if (pa_drv->remove)
 		pa_drv->remove(pa_dev);
-	release_mem_region(pa_dev->hpa, 0x1000);
 
 	return 0;
 }
@@ -173,6 +181,24 @@ int register_parisc_driver(struct parisc_driver *driver)
 }
 EXPORT_SYMBOL(register_parisc_driver);
 
+
+struct match_count {
+	struct parisc_driver * driver;
+	int count;
+};
+
+static int match_and_count(struct device * dev, void * data)
+{
+	struct match_count * m = data;
+	struct parisc_device * pdev = to_parisc_device(dev);
+
+	if (check_dev(dev)) {
+		if (match_device(m->driver, pdev))
+			m->count++;
+	}
+	return 0;
+}
+
 /**
  * count_parisc_driver - count # of devices this driver would match
  * @driver: the PA-RISC driver to try
@@ -182,15 +208,14 @@ EXPORT_SYMBOL(register_parisc_driver);
  */
 int count_parisc_driver(struct parisc_driver *driver)
 {
-	struct parisc_device *device;
-	int cnt = 0;
+	struct match_count m = {
+		.driver	= driver,
+		.count	= 0,
+	};
 
-	for_each_padev(device) {
-		if (match_device(driver, device))
-			cnt++;
-	}
+	for_each_padev(match_and_count, &m);
 
-	return cnt;
+	return m.count;
 }
 
 
@@ -206,14 +231,34 @@ int unregister_parisc_driver(struct parisc_driver *driver)
 }
 EXPORT_SYMBOL(unregister_parisc_driver);
 
-static struct parisc_device *find_device_by_addr(unsigned long hpa)
+struct find_data {
+	unsigned long hpa;
+	struct parisc_device * dev;
+};
+
+static int find_device(struct device * dev, void * data)
 {
-	struct parisc_device *dev;
-	for_each_padev(dev) {
-		if (dev->hpa == hpa)
-			return dev;
+	struct parisc_device * pdev = to_parisc_device(dev);
+	struct find_data * d = (struct find_data*)data;
+
+	if (check_dev(dev)) {
+		if (pdev->hpa.start == d->hpa) {
+			d->dev = pdev;
+			return 1;
+		}
 	}
-	return NULL;
+	return 0;
+}
+
+static struct parisc_device *find_device_by_addr(unsigned long hpa)
+{
+	struct find_data d = {
+		.hpa	= hpa,
+	};
+	int ret;
+
+	ret = for_each_padev(find_device, &d);
+	return ret ? d.dev : NULL;
 }
 
 /**
@@ -387,6 +432,23 @@ struct parisc_device * create_tree_node(char id, struct device *parent)
 	return dev;
 }
 
+struct match_id_data {
+	char id;
+	struct parisc_device * dev;
+};
+
+static int match_by_id(struct device * dev, void * data)
+{
+	struct parisc_device * pdev = to_parisc_device(dev);
+	struct match_id_data * d = data;
+
+	if (pdev->hw_path == d->id) {
+		d->dev = pdev;
+		return 1;
+	}
+	return 0;
+}
+
 /**
  * alloc_tree_node - returns a device entry in the iotree
  * @parent: the parent node in the tree
@@ -397,15 +459,13 @@ struct parisc_device * create_tree_node(char id, struct device *parent)
  */
 static struct parisc_device * alloc_tree_node(struct device *parent, char id)
 {
-	struct device *dev;
-
-	list_for_each_entry(dev, &parent->children, node) {
-		struct parisc_device *padev = to_parisc_device(dev);
-		if (padev->hw_path == id)
-			return padev;
-	}
-
-	return create_tree_node(id, parent);
+	struct match_id_data d = {
+		.id = id,
+	};
+	if (device_for_each_child(parent, &d, match_by_id))
+		return d.dev;
+	else
+		return create_tree_node(id, parent);
 }
 
 static struct parisc_device *create_parisc_device(struct hardware_path *modpath)
@@ -439,10 +499,8 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path)
 
 	dev = create_parisc_device(mod_path);
 	if (dev->id.hw_type != HPHW_FAULTY) {
-		char p[64];
-		print_pa_hwpath(dev, p);
 		printk("Two devices have hardware path %s.  Please file a bug with HP.\n"
-			"In the meantime, you could try rearranging your cards.\n", p);
+			"In the meantime, you could try rearranging your cards.\n", parisc_pathname(dev));
 		return NULL;
 	}
 
@@ -451,12 +509,27 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path)
 	dev->id.hversion_rev = iodc_data[1] & 0x0f;
 	dev->id.sversion = ((iodc_data[4] & 0x0f) << 16) |
 			(iodc_data[5] << 8) | iodc_data[6];
-	dev->hpa = hpa;
+	dev->hpa.name = parisc_pathname(dev);
+	dev->hpa.start = hpa;
+	if (hpa == 0xf4000000 || hpa == 0xf6000000 ||
+	    hpa == 0xf8000000 || hpa == 0xfa000000) {
+		dev->hpa.end = hpa + 0x01ffffff;
+	} else {
+		dev->hpa.end = hpa + 0xfff;
+	}
+	dev->hpa.flags = IORESOURCE_MEM;
 	name = parisc_hardware_description(&dev->id);
 	if (name) {
 		strlcpy(dev->name, name, sizeof(dev->name));
 	}
 
+	/* Silently fail things like mouse ports which are subsumed within
+	 * the keyboard controller
+	 */
+	if ((hpa & 0xfff) == 0 && insert_resource(&iomem_resource, &dev->hpa))
+		printk("Unable to claim HPA %lx for device %s\n",
+				hpa, name);
+
 	return dev;
 }
 
@@ -555,6 +628,33 @@ static int match_parisc_device(struct device *dev, int index,
 	return (curr->hw_path == id);
 }
 
+struct parse_tree_data {
+	int index;
+	struct hardware_path * modpath;
+	struct device * dev;
+};
+
+static int check_parent(struct device * dev, void * data)
+{
+	struct parse_tree_data * d = data;
+
+	if (check_dev(dev)) {
+		if (dev->bus == &parisc_bus_type) {
+			if (match_parisc_device(dev, d->index, d->modpath))
+				d->dev = dev;
+		} else if (is_pci_dev(dev)) {
+			if (match_pci_device(dev, d->index, d->modpath))
+				d->dev = dev;
+		} else if (dev->bus == NULL) {
+			/* we are on a bus bridge */
+			struct device *new = parse_tree_node(dev, d->index, d->modpath);
+			if (new)
+				d->dev = new;
+		}
+	}
+	return d->dev != NULL;
+}
+
 /**
  * parse_tree_node - returns a device entry in the iotree
  * @parent: the parent node in the tree
@@ -568,24 +668,18 @@ static int match_parisc_device(struct device *dev, int index,
 static struct device *
 parse_tree_node(struct device *parent, int index, struct hardware_path *modpath)
 {
-	struct device *device;
-	 
-	list_for_each_entry(device, &parent->children, node) {
-		if (device->bus == &parisc_bus_type) {
-			if (match_parisc_device(device, index, modpath))
-				return device;
-		} else if (is_pci_dev(device)) {
-			if (match_pci_device(device, index, modpath))
-				return device;
-		} else if (device->bus == NULL) {
-			/* we are on a bus bridge */
-			struct device *new = parse_tree_node(device, index, modpath);
-			if (new)
-				return new;
-		}
-	}
+	struct parse_tree_data d = {
+		.index          = index,
+		.modpath        = modpath,
+	};
 
-	return NULL;
+	struct recurse_struct recurse_data = {
+		.obj	= &d,
+		.fn	= check_parent,
+	};
+
+	device_for_each_child(parent, &recurse_data, descend_children);
+	return d.dev;
 }
 
 /**
@@ -636,7 +730,7 @@ EXPORT_SYMBOL(device_to_hwpath);
         ((dev->id.hw_type == HPHW_IOA) || (dev->id.hw_type == HPHW_BCPORT))
 
 #define IS_LOWER_PORT(dev) \
-        ((gsc_readl(dev->hpa + offsetof(struct bc_module, io_status)) \
+        ((gsc_readl(dev->hpa.start + offsetof(struct bc_module, io_status)) \
                 & BC_PORT_MASK) == BC_LOWER_PORT)
 
 #define MAX_NATIVE_DEVICES 64
@@ -645,8 +739,8 @@ EXPORT_SYMBOL(device_to_hwpath);
 #define FLEX_MASK 	F_EXTEND(0xfffc0000)
 #define IO_IO_LOW	offsetof(struct bc_module, io_io_low)
 #define IO_IO_HIGH	offsetof(struct bc_module, io_io_high)
-#define READ_IO_IO_LOW(dev)  (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_LOW)
-#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_HIGH)
+#define READ_IO_IO_LOW(dev)  (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_LOW)
+#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_HIGH)
 
 static void walk_native_bus(unsigned long io_io_low, unsigned long io_io_high,
                             struct device *parent);
@@ -655,10 +749,10 @@ void walk_lower_bus(struct parisc_device *dev)
 {
 	unsigned long io_io_low, io_io_high;
 
-	if(!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev))
+	if (!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev))
 		return;
 
-	if(dev->id.hw_type == HPHW_IOA) {
+	if (dev->id.hw_type == HPHW_IOA) {
 		io_io_low = (unsigned long)(signed int)(READ_IO_IO_LOW(dev) << 16);
 		io_io_high = io_io_low + MAX_NATIVE_DEVICES * NATIVE_DEVICE_OFFSET;
 	} else {
@@ -731,7 +825,7 @@ static void print_parisc_device(struct parisc_device *dev)
 
 	print_pa_hwpath(dev, hw_path);
 	printk(KERN_INFO "%d. %s at 0x%lx [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }",
-		++count, dev->name, dev->hpa, hw_path, dev->id.hw_type,
+		++count, dev->name, dev->hpa.start, hw_path, dev->id.hw_type,
 		dev->id.hversion_rev, dev->id.hversion, dev->id.sversion);
 
 	if (dev->num_addrs) {
@@ -753,13 +847,20 @@ void init_parisc_bus(void)
 	get_device(&root);
 }
 
+
+static int print_one_device(struct device * dev, void * data)
+{
+	struct parisc_device * pdev = to_parisc_device(dev);
+
+	if (check_dev(dev))
+		print_parisc_device(pdev);
+	return 0;
+}
+
 /**
  * print_parisc_devices - Print out a list of devices found in this system
  */
 void print_parisc_devices(void)
 {
-	struct parisc_device *dev;
-	for_each_padev(dev) {
-		print_parisc_device(dev);
-	}
+	for_each_padev(print_one_device, NULL);
 }
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index be0f07f2fa58..c7e66ee5b083 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -30,14 +30,14 @@
  *  - save registers to kernel stack and handle in assembly or C */
 
 
+#include <asm/psw.h>
 #include <asm/assembly.h>	/* for LDREG/STREG defines */
 #include <asm/pgtable.h>
-#include <asm/psw.h>
 #include <asm/signal.h>
 #include <asm/unistd.h>
 #include <asm/thread_info.h>
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #define CMPIB           cmpib,*
 #define CMPB            cmpb,*
 #define COND(x)		*x
@@ -67,19 +67,22 @@
 
 	/* Switch to virtual mapping, trashing only %r1 */
 	.macro  virt_map
-	rsm     PSW_SM_Q,%r0
-	tovirt_r1 %r29
-	mfsp	%sr7, %r1
-	or,=    %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */
-	mtsp	%r1, %sr3
+	/* pcxt_ssm_bug */
+	rsm	PSW_SM_I, %r0	/* barrier for "Relied upon Translation */
 	mtsp	%r0, %sr4
 	mtsp	%r0, %sr5
+	mfsp	%sr7, %r1
+	or,=    %r0,%r1,%r0	/* Only save sr7 in sr3 if sr7 != 0 */
+	mtsp	%r1, %sr3
+	tovirt_r1 %r29
+	load32	KERNEL_PSW, %r1
+
+	rsm     PSW_SM_QUIET,%r0	/* second "heavy weight" ctl op */
 	mtsp	%r0, %sr6
 	mtsp	%r0, %sr7
-	load32	KERNEL_PSW, %r1
-	mtctl	%r1, %cr22
 	mtctl	%r0, %cr17	/* Clear IIASQ tail */
 	mtctl	%r0, %cr17	/* Clear IIASQ head */
+	mtctl	%r1, %ipsw
 	load32	4f, %r1
 	mtctl	%r1, %cr18	/* Set IIAOQ tail */
 	ldo	4(%r1), %r1
@@ -214,7 +217,7 @@
 	va  = r8	/* virtual address for which the trap occured */
 	spc = r24	/* space for which the trap occured */
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 
 	/*
 	 * itlb miss interruption handler (parisc 1.1 - 32 bit)
@@ -236,7 +239,7 @@
 
 	.macro	itlb_20 code
 	mfctl	%pcsq, spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	b       itlb_miss_20w
 #else
 	b	itlb_miss_20
@@ -246,7 +249,7 @@
 	.align		32
 	.endm
 	
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	/*
 	 * naitlb miss interruption handler (parisc 1.1 - 32 bit)
 	 *
@@ -283,7 +286,7 @@
 	.macro	naitlb_20 code
 
 	mfctl	%isr,spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	b       itlb_miss_20w
 #else
 	b	itlb_miss_20
@@ -296,7 +299,7 @@
 	.align		32
 	.endm
 	
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	/*
 	 * dtlb miss interruption handler (parisc 1.1 - 32 bit)
 	 */
@@ -318,7 +321,7 @@
 	.macro	dtlb_20 code
 
 	mfctl	%isr, spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	b       dtlb_miss_20w
 #else
 	b	dtlb_miss_20
@@ -328,7 +331,7 @@
 	.align		32
 	.endm
 	
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	/* nadtlb miss interruption handler (parisc 1.1 - 32 bit) */
 
 	.macro	nadtlb_11 code
@@ -346,7 +349,7 @@
 	.macro	nadtlb_20 code
 
 	mfctl	%isr,spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	b       nadtlb_miss_20w
 #else
 	b       nadtlb_miss_20
@@ -356,7 +359,7 @@
 	.align		32
 	.endm
 	
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	/*
 	 * dirty bit trap interruption handler (parisc 1.1 - 32 bit)
 	 */
@@ -378,7 +381,7 @@
 	.macro	dbit_20 code
 
 	mfctl	%isr,spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	b       dbit_trap_20w
 #else
 	b	dbit_trap_20
@@ -391,7 +394,7 @@
 	/* The following are simple 32 vs 64 bit instruction
 	 * abstractions for the macros */
 	.macro		EXTR	reg1,start,length,reg2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u		\reg1,32+\start,\length,\reg2
 #else
 	extrw,u		\reg1,\start,\length,\reg2
@@ -399,7 +402,7 @@
 	.endm
 
 	.macro		DEP	reg1,start,length,reg2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depd		\reg1,32+\start,\length,\reg2
 #else
 	depw		\reg1,\start,\length,\reg2
@@ -407,7 +410,7 @@
 	.endm
 
 	.macro		DEPI	val,start,length,reg
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi		\val,32+\start,\length,\reg
 #else
 	depwi		\val,\start,\length,\reg
@@ -418,7 +421,7 @@
 	 * fault.  We have to extract this and place it in the va,
 	 * zeroing the corresponding bits in the space register */
 	.macro		space_adjust	spc,va,tmp
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u		\spc,63,SPACEID_SHIFT,\tmp
 	depd		%r0,63,SPACEID_SHIFT,\spc
 	depd		\tmp,31,SPACEID_SHIFT,\va
@@ -476,7 +479,7 @@
 	bb,>=,n		\pmd,_PxD_PRESENT_BIT,\fault
 	DEP		%r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */
 	copy		\pmd,%r9
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	shld		%r9,PxD_VALUE_SHIFT,\pmd
 #else
 	shlw		%r9,PxD_VALUE_SHIFT,\pmd
@@ -607,7 +610,7 @@
 	.macro		do_alias	spc,tmp,tmp1,va,pte,prot,fault
 	cmpib,COND(<>),n 0,\spc,\fault
 	ldil		L%(TMPALIAS_MAP_START),\tmp
-#if defined(__LP64__) && (TMPALIAS_MAP_START >= 0x80000000)
+#if defined(CONFIG_64BIT) && (TMPALIAS_MAP_START >= 0x80000000)
 	/* on LP64, ldi will sign extend into the upper 32 bits,
 	 * which is behaviour we don't want */
 	depdi		0,31,32,\tmp
@@ -621,7 +624,7 @@
 	 * OK, it is in the temp alias region, check whether "from" or "to".
 	 * Check "subtle" note in pacache.S re: r23/r26.
 	 */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u,*=	\va,41,1,%r0
 #else
 	extrw,u,=	\va,9,1,%r0
@@ -688,7 +691,7 @@ fault_vector_20:
 	def		30
 	def		31
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 
 	.export fault_vector_11
 	
@@ -761,7 +764,7 @@ __kernel_thread:
 
 	copy	%r30, %r1
 	ldo	PT_SZ_ALGN(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* Yo, function pointers in wide mode are little structs... -PB */
 	ldd	24(%r26), %r2
 	STREG	%r2, PT_GR27(%r1)	/* Store childs %dp */
@@ -777,7 +780,7 @@ __kernel_thread:
 	or	%r26, %r24, %r26      /* will have kernel mappings.	 */
 	ldi	1, %r25			/* stack_start, signals kernel thread */
 	stw	%r0, -52(%r30)	     	/* user_tid */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 	BL	do_fork, %r2
@@ -806,7 +809,7 @@ ret_from_kernel_thread:
 
 	LDREG	TI_TASK-THREAD_SZ_ALGN(%r30), %r1
 	LDREG	TASK_PT_GR25(%r1), %r26
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	LDREG	TASK_PT_GR27(%r1), %r27
 	LDREG	TASK_PT_GR22(%r1), %r22
 #endif
@@ -814,11 +817,16 @@ ret_from_kernel_thread:
 	ble	0(%sr7, %r1)
 	copy	%r31, %r2
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 	loadgp				/* Thread could have been in a module */
 #endif
+#ifndef CONFIG_64BIT
 	b	sys_exit
+#else
+	load32	sys_exit, %r1
+	bv	%r0(%r1)
+#endif
 	ldi	0, %r26
 
 	.import	sys_execve, code
@@ -830,7 +838,7 @@ __execve:
 	STREG	%r26, PT_GR26(%r16)
 	STREG	%r25, PT_GR25(%r16)
 	STREG	%r24, PT_GR24(%r16)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 	BL	sys_execve, %r2
@@ -855,6 +863,7 @@ __execve:
 _switch_to:
 	STREG	 %r2, -RP_OFFSET(%r30)
 
+	callee_save_float
 	callee_save
 
 	load32	_switch_to_ret, %r2
@@ -871,6 +880,7 @@ _switch_to:
 _switch_to_ret:
 	mtctl	%r0, %cr0		/* Needed for single stepping */
 	callee_rest
+	callee_rest_float
 
 	LDREG	-RP_OFFSET(%r30), %r2
 	bv	%r0(%r2)
@@ -888,9 +898,6 @@ _switch_to_ret:
 	 * this way, then we will need to copy %sr3 in to PT_SR[3..7], and
 	 * adjust IASQ[0..1].
 	 *
-	 * Note that the following code uses a "relied upon translation".
-	 * See the parisc ACD for details. The ssm is necessary due to a
-	 * PCXT bug.
 	 */
 
 	.align 4096
@@ -911,7 +918,7 @@ syscall_exit_rfi:
 	STREG	%r19,PT_IAOQ1(%r16)
 	LDREG   PT_PSW(%r16),%r19
 	load32	USER_PSW_MASK,%r1
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	load32	USER_PSW_HI_MASK,%r20
 	depd    %r20,31,32,%r1
 #endif
@@ -955,7 +962,7 @@ intr_return:
 	/* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) amount
 	** irq_stat[] is defined using ____cacheline_aligned.
 	*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	shld	%r1, 6, %r20
 #else
 	shlw	%r1, 5, %r20
@@ -963,9 +970,6 @@ intr_return:
 	add     %r19,%r20,%r19	/* now have &irq_stat[smp_processor_id()] */
 #endif /* CONFIG_SMP */
 
-	LDREG   IRQSTAT_SIRQ_PEND(%r19),%r20    /* hardirq.h: unsigned long */
-	cmpib,<>,n 0,%r20,intr_do_softirq /* forward */
-
 intr_check_resched:
 
 	/* check for reschedule */
@@ -985,24 +989,19 @@ intr_restore:
 	rest_fp         %r1
 	rest_general    %r29
 
-	/* Create a "relied upon translation" PA 2.0 Arch. F-5 */
-	ssm		0,%r0
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
+	/* inverse of virt_map */
+	pcxt_ssm_bug
+	rsm             PSW_SM_QUIET,%r0	/* prepare for rfi */
 	tophys_r1       %r29
-	rsm             (PSW_SM_Q|PSW_SM_P|PSW_SM_D|PSW_SM_I),%r0
 
 	/* Restore space id's and special cr's from PT_REGS
-	 * structure pointed to by r29 */
+	 * structure pointed to by r29
+	 */
 	rest_specials	%r29
 
-	/* Important: Note that rest_stack restores r29
-	 * last (we are using it)! It also restores r1 and r30. */
+	/* IMPORTANT: rest_stack restores r29 last (we are using it)!
+	 * It also restores r1 and r30.
+	 */
 	rest_stack
 
 	rfi
@@ -1015,17 +1014,6 @@ intr_restore:
 	nop
 	nop
 
-	.import do_softirq,code
-intr_do_softirq:
-	bl      do_softirq,%r2
-#ifdef __LP64__
-	ldo	-16(%r30),%r29		/* Reference param save area */
-#else
-	nop
-#endif
-	b       intr_check_resched
-	nop
-
 	.import schedule,code
 intr_do_resched:
 	/* Only do reschedule if we are returning to user space */
@@ -1036,12 +1024,17 @@ intr_do_resched:
 	CMPIB= 0,%r20,intr_restore /* backward */
 	nop
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 
 	ldil	L%intr_check_sig, %r2
+#ifndef CONFIG_64BIT
 	b	schedule
+#else
+	load32	schedule, %r20
+	bv	%r0(%r20)
+#endif
 	ldo	R%intr_check_sig(%r2), %r2
 
 
@@ -1064,7 +1057,7 @@ intr_do_signal:
 
 	copy	%r0, %r24			/* unsigned long in_syscall */
 	copy	%r16, %r25			/* struct pt_regs *regs */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
 #endif
 
@@ -1088,7 +1081,7 @@ intr_extint:
 	mfctl	%cr31,%r1
 	copy	%r30,%r17
 	/* FIXME! depi below has hardcoded idea of interrupt stack size (32k)*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi	0,63,15,%r17
 #else
 	depi	0,31,15,%r17
@@ -1115,7 +1108,7 @@ intr_extint:
 
 	ldil	L%intr_return, %r2
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29	/* Reference param save area */
 #endif
 
@@ -1153,15 +1146,17 @@ intr_save:
 
 	CMPIB=,n        6,%r26,skip_save_ior
 
-	/* save_specials left ipsw value in r8 for us to test */
 
 	mfctl           %cr20, %r16 /* isr */
+	nop		/* serialize mfctl on PA 2.0 to avoid 4 cycle penalty */
 	mfctl           %cr21, %r17 /* ior */
 
-#ifdef __LP64__
+
+#ifdef CONFIG_64BIT
 	/*
 	 * If the interrupted code was running with W bit off (32 bit),
 	 * clear the b bits (bits 0 & 1) in the ior.
+	 * save_specials left ipsw value in r8 for us to test.
 	 */
 	extrd,u,*<>     %r8,PSW_W_BIT,1,%r0
 	depdi           0,1,2,%r17
@@ -1192,7 +1187,7 @@ skip_save_ior:
 	loadgp
 
 	copy		%r29, %r25	/* arg1 is pt_regs */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo		-16(%r30),%r29	/* Reference param save area */
 #endif
 
@@ -1230,7 +1225,7 @@ skip_save_ior:
 	spc  = r24	/* space for which the trap occured */
 	ptp = r25	/* page directory/page table pointer */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 
 dtlb_miss_20w:
 	space_adjust	spc,va,t0
@@ -1487,10 +1482,10 @@ nadtlb_emulate:
 	add,l           %r1,%r24,%r1           /* doesn't affect c/b bits */
 
 nadtlb_nullify:
-	mfctl           %cr22,%r8              /* Get ipsw */
+	mfctl           %ipsw,%r8
 	ldil            L%PSW_N,%r9
 	or              %r8,%r9,%r8            /* Set PSW_N */
-	mtctl           %r8,%cr22
+	mtctl           %r8,%ipsw
 
 	rfir
 	nop
@@ -1521,7 +1516,7 @@ nadtlb_probe_check:
 	nop
 
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 itlb_miss_20w:
 
 	/*
@@ -1588,7 +1583,7 @@ itlb_miss_20:
 
 #endif
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 
 dbit_trap_20w:
 	space_adjust	spc,va,t0
@@ -1797,7 +1792,7 @@ sys_fork_wrapper:
 
 	STREG	%r2,-RP_OFFSET(%r30)
 	ldo	FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 
@@ -1847,7 +1842,7 @@ sys_clone_wrapper:
 
 	STREG	%r2,-RP_OFFSET(%r30)
 	ldo	FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 
@@ -1869,7 +1864,7 @@ sys_vfork_wrapper:
 
 	STREG	%r2,-RP_OFFSET(%r30)
 	ldo	FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 
@@ -1897,10 +1892,10 @@ sys_vfork_wrapper:
 
 	STREG %r2,-RP_OFFSET(%r30)
 	ldo FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
-	bl \execve,%r2
+	BL \execve,%r2
 	copy %r1,%arg0
 
 	ldo -FRAME_SIZE(%r30),%r30
@@ -1923,7 +1918,7 @@ error_\execve:
 sys_execve_wrapper:
 	execve_wrapper sys_execve
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	.export sys32_execve_wrapper
 	.import sys32_execve
 
@@ -1937,7 +1932,7 @@ sys_rt_sigreturn_wrapper:
 	ldo	TASK_REGS(%r26),%r26	/* get pt regs */
 	/* Don't save regs, we are going to restore them from sigcontext. */
 	STREG	%r2, -RP_OFFSET(%r30)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	FRAME_SIZE(%r30), %r30
 	BL	sys_rt_sigreturn,%r2
 	ldo	-16(%r30),%r29		/* Reference param save area */
@@ -1968,7 +1963,7 @@ sys_sigaltstack_wrapper:
 	ldo	TASK_REGS(%r1),%r24	/* get pt regs */
 	LDREG	TASK_PT_GR30(%r24),%r24
 	STREG	%r2, -RP_OFFSET(%r30)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	FRAME_SIZE(%r30), %r30
 	b,l	do_sigaltstack,%r2
 	ldo	-16(%r30),%r29		/* Reference param save area */
@@ -1982,7 +1977,7 @@ sys_sigaltstack_wrapper:
 	bv	%r0(%r2)
 	nop
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	.export sys32_sigaltstack_wrapper
 sys32_sigaltstack_wrapper:
 	/* Get the user stack pointer */
@@ -2006,7 +2001,7 @@ sys_rt_sigsuspend_wrapper:
 	reg_save %r24
 
 	STREG	%r2, -RP_OFFSET(%r30)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	FRAME_SIZE(%r30), %r30
 	b,l	sys_rt_sigsuspend,%r2
 	ldo	-16(%r30),%r29		/* Reference param save area */
@@ -2079,7 +2074,7 @@ syscall_check_bh:
 	ldw     TI_CPU-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26 /* cpu # */
 
 	/* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) bits */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	shld	%r26, 6, %r20
 #else
 	shlw	%r26, 5, %r20
@@ -2087,9 +2082,6 @@ syscall_check_bh:
 	add     %r19,%r20,%r19	/* now have &irq_stat[smp_processor_id()] */
 #endif /* CONFIG_SMP */
 
-	LDREG   IRQSTAT_SIRQ_PEND(%r19),%r20    /* hardirq.h: unsigned long */
-	cmpib,<>,n 0,%r20,syscall_do_softirq /* forward */
-
 syscall_check_resched:
 
 	/* check for reschedule */
@@ -2144,7 +2136,7 @@ syscall_restore:
 
 	depi	3,31,2,%r31			   /* ensure return to user mode. */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* decide whether to reset the wide mode bit
 	 *
 	 * For a syscall, the W bit is stored in the lowest bit
@@ -2227,20 +2219,10 @@ pt_regs_ok:
 	b	intr_restore
 	nop
 
-	.import do_softirq,code
-syscall_do_softirq:
-	bl      do_softirq,%r2
-	nop
-	/* NOTE: We enable I-bit incase we schedule later,
-	 * and we might be going back to userspace if we were
-	 * traced. */
-	b       syscall_check_resched
-	ssm     PSW_SM_I, %r0  /* do_softirq returns with I bit off */
-
 	.import schedule,code
 syscall_do_resched:
 	BL	schedule,%r2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #else
 	nop
@@ -2260,7 +2242,7 @@ syscall_do_signal:
 
 	ldi	1, %r24				/* unsigned long in_syscall */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
 #endif
 	BL	do_signal,%r2
diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c
index f244fb200db1..553f8fe03224 100644
--- a/arch/parisc/kernel/firmware.c
+++ b/arch/parisc/kernel/firmware.c
@@ -83,15 +83,15 @@ static unsigned long pdc_result2[32] __attribute__ ((aligned (8)));
 int parisc_narrow_firmware = 1;
 #endif
 
-/* on all currently-supported platforms, IODC I/O calls are always
- * 32-bit calls, and MEM_PDC calls are always the same width as the OS.
- * This means Cxxx boxes can't run wide kernels right now. -PB
+/* On most currently-supported platforms, IODC I/O calls are 32-bit calls
+ * and MEM_PDC calls are always the same width as the OS.
+ * Some PAT boxes may have 64-bit IODC I/O.
  *
- * CONFIG_PDC_NARROW has been added to allow 64-bit kernels to run on
- * systems with 32-bit MEM_PDC calls. This will allow wide kernels to
- * run on Cxxx boxes now. -RB
- *
- * Note that some PAT boxes may have 64-bit IODC I/O...
+ * Ryan Bradetich added the now obsolete CONFIG_PDC_NARROW to allow
+ * 64-bit kernels to run on systems with 32-bit MEM_PDC calls.
+ * This allowed wide kernels to run on Cxxx boxes.
+ * We now detect 32-bit-only PDC and dynamically switch to 32-bit mode
+ * when running a 64-bit kernel on such boxes (e.g. C200 or C360).
  */
 
 #ifdef __LP64__
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index 28405edf8448..0b47afc20690 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -12,7 +12,7 @@
  * Initial Version 04-23-1999 by Helge Deller <deller@gmx.de>
  */
 
-#include <linux/autoconf.h>	/* for CONFIG_SMP */
+#include <linux/config.h>	/* for CONFIG_SMP */
 
 #include <asm/asm-offsets.h>
 #include <asm/psw.h>
@@ -36,10 +36,10 @@ boot_args:
 	.align	4
 	.import init_thread_union,data
 	.import fault_vector_20,code    /* IVA parisc 2.0 32 bit */
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
         .import fault_vector_11,code    /* IVA parisc 1.1 32 bit */
 	.import	$global$		/* forward declaration */
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
 	.export stext
 	.export _stext,data		/* Kernel want it this way! */
 _stext:
@@ -76,7 +76,7 @@ $bss_loop:
 	mtctl		%r4,%cr24	/* Initialize kernel root pointer */
 	mtctl		%r4,%cr25	/* Initialize user root pointer */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* Set pmd in pgd */
 	load32		PA(pmd0),%r5
 	shrd            %r5,PxD_VALUE_SHIFT,%r3	
@@ -99,7 +99,7 @@ $bss_loop:
 	stw		%r3,0(%r4)
 	ldo		(ASM_PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3
 	addib,>		-1,%r1,1b
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo             ASM_PMD_ENTRY_SIZE(%r4),%r4
 #else
 	ldo             ASM_PGD_ENTRY_SIZE(%r4),%r4
@@ -170,7 +170,7 @@ common_stext:
 	stw		%r0,0x28(%r0)	/* MEM_RENDEZ_HI */
 #endif /*CONFIG_SMP*/
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	tophys_r1	%sp
 
 	/* Save the rfi target address */
@@ -224,8 +224,6 @@ stext_pdc_ret:
 	mtctl	%r0,%cr12
 	mtctl	%r0,%cr13
 
-	/* Prepare to RFI! Man all the cannons! */
-
 	/* Initialize the global data pointer */
 	loadgp
 
@@ -235,7 +233,7 @@ stext_pdc_ret:
 	 * following short sequence of instructions can determine this
 	 * (without being illegal on a PA1.1 machine).
 	 */
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	ldi		32,%r10
 	mtctl		%r10,%cr11
 	.level 2.0
@@ -248,52 +246,22 @@ stext_pdc_ret:
 
 $is_pa20:
 	.level		LEVEL /* restore 1.1 || 2.0w */
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
 	load32		PA(fault_vector_20),%r10
 
 $install_iva:
 	mtctl		%r10,%cr14
 
-#ifdef __LP64__
-	b		aligned_rfi
+	b		aligned_rfi  /* Prepare to RFI! Man all the cannons! */
 	nop
 
-	.align          256
+	.align 128
 aligned_rfi:
-	ssm             0,0
-	nop             /* 1 */
-	nop             /* 2 */
-	nop             /* 3 */
-	nop             /* 4 */
-	nop             /* 5 */
-	nop             /* 6 */
-	nop             /* 7 */
-	nop             /* 8 */
-#endif
+	pcxt_ssm_bug
 
-#ifdef __LP64__ /* move to psw.h? */
-#define		PSW_BITS	PSW_Q+PSW_I+PSW_D+PSW_P+PSW_R
-#else
-#define		PSW_BITS	PSW_SM_Q
-#endif
+	rsm		PSW_SM_QUIET,%r0	/* off troublesome PSW bits */
+	/* Don't need NOPs, have 8 compliant insn before rfi */
 
-$rfi:	
-	/* turn off troublesome PSW bits */
-	rsm		PSW_BITS,%r0
-
-	/* kernel PSW:
-	 *  - no interruptions except HPMC and TOC (which are handled by PDC)
-	 *  - Q bit set (IODC / PDC interruptions)
-	 *  - big-endian
-	 *  - virtually mapped
-	 */
-	load32		KERNEL_PSW,%r10
-	mtctl		%r10,%ipsw
-
-	/* Set the space pointers for the post-RFI world
-	** Clear the two-level IIA Space Queue, effectively setting
-	** Kernel space.
-	*/
 	mtctl		%r0,%cr17	/* Clear IIASQ tail */
 	mtctl		%r0,%cr17	/* Clear IIASQ head */
 
@@ -301,8 +269,11 @@ $rfi:
 	mtctl		%r11,%cr18	/* IIAOQ head */
 	ldo		4(%r11),%r11
 	mtctl		%r11,%cr18	/* IIAOQ tail */
+
+	load32		KERNEL_PSW,%r10
+	mtctl		%r10,%ipsw
 	
-	/* Jump to hyperspace */
+	/* Jump through hyperspace to Virt Mode */
 	rfi
 	nop
 
@@ -313,7 +284,7 @@ $rfi:
 	.import smp_init_current_idle_task,data
 	.import	smp_callin,code
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 smp_callin_rtn:
         .proc
 	.callinfo
@@ -321,7 +292,7 @@ smp_callin_rtn:
 	nop
 	nop
         .procend
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
 
 /***************************************************************************
 * smp_slave_stext is executed by all non-monarch Processors when the Monarch
@@ -356,7 +327,7 @@ smp_slave_stext:
 	mtctl		%r4,%cr24	/* Initialize kernel root pointer */
 	mtctl		%r4,%cr25	/* Initialize user root pointer */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* Setup PDCE_PROC entry */
 	copy            %arg0,%r3
 #else
@@ -373,7 +344,7 @@ smp_slave_stext:
 
 	.procend
 #endif /* CONFIG_SMP */
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	.data
 
 	.align	4
@@ -383,4 +354,4 @@ smp_slave_stext:
 	.size	$global$,4
 $global$:	
 	.word 0
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
diff --git a/arch/parisc/kernel/ioctl32.c b/arch/parisc/kernel/ioctl32.c
index 1d3824b670d1..0a331104ad56 100644
--- a/arch/parisc/kernel/ioctl32.c
+++ b/arch/parisc/kernel/ioctl32.c
@@ -104,12 +104,9 @@ static int drm32_version(unsigned int fd, unsigned int cmd, unsigned long arg)
 	}
 
 out:
-	if (kversion.name)
-		kfree(kversion.name);
-	if (kversion.date)
-		kfree(kversion.date);
-	if (kversion.desc)
-		kfree(kversion.desc);
+	kfree(kversion.name);
+	kfree(kversion.date);
+	kfree(kversion.desc);
 	return ret;
 }
 
@@ -166,9 +163,7 @@ static int drm32_getsetunique(unsigned int fd, unsigned int cmd, unsigned long a
 			ret = -EFAULT;
 	}
 
-	if (karg.unique != NULL)
-		kfree(karg.unique);
-
+	kfree(karg.unique);
 	return ret;
 }
 
@@ -265,7 +260,6 @@ static int drm32_info_bufs(unsigned int fd, unsigned int cmd, unsigned long arg)
 	}
 
 	kfree(karg.list);
-
 	return ret;
 }
 
@@ -305,7 +299,6 @@ static int drm32_free_bufs(unsigned int fd, unsigned int cmd, unsigned long arg)
 
 out:
 	kfree(karg.list);
-
 	return ret;
 }
 
@@ -494,15 +487,10 @@ static int drm32_dma(unsigned int fd, unsigned int cmd, unsigned long arg)
 	}
 
 out:
-	if (karg.send_indices)
-		kfree(karg.send_indices);
-	if (karg.send_sizes)
-		kfree(karg.send_sizes);
-	if (karg.request_indices)
-		kfree(karg.request_indices);
-	if (karg.request_sizes)
-		kfree(karg.request_sizes);
-
+	kfree(karg.send_indices);
+	kfree(karg.send_sizes);
+	kfree(karg.request_indices);
+	kfree(karg.request_sizes);
 	return ret;
 }
 
@@ -555,9 +543,7 @@ static int drm32_res_ctx(unsigned int fd, unsigned int cmd, unsigned long arg)
 			ret = -EFAULT;
 	}
 
-	if (karg.contexts)
-		kfree(karg.contexts);
-
+	kfree(karg.contexts);
 	return ret;
 }
 
@@ -575,11 +561,6 @@ IOCTL_TABLE_START
 #define DECLARES
 #include "compat_ioctl.c"
 
-/* Might be moved to compat_ioctl.h with some ifdefs... */
-COMPATIBLE_IOCTL(TIOCSTART)
-COMPATIBLE_IOCTL(TIOCSTOP)
-COMPATIBLE_IOCTL(TIOCSLTC)
-
 /* PA-specific ioctls */
 COMPATIBLE_IOCTL(PA_PERF_ON)
 COMPATIBLE_IOCTL(PA_PERF_OFF)
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index 77e03bc0f935..9534ee17b9be 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -26,7 +26,7 @@
  *       can be used.
  */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #define ADDIB	addib,*
 #define CMPB	cmpb,*
 #define ANDCM	andcm,*
@@ -40,8 +40,10 @@
 	.level	2.0
 #endif
 
-#include <asm/assembly.h>
+#include <linux/config.h>
+
 #include <asm/psw.h>
+#include <asm/assembly.h>
 #include <asm/pgtable.h>
 #include <asm/cache.h>
 
@@ -62,32 +64,23 @@ flush_tlb_all_local:
 	 * to happen in real mode with all interruptions disabled.
 	 */
 
-	/*
-	 * Once again, we do the rfi dance ... some day we need examine
-	 * all of our uses of this type of code and see what can be
-	 * consolidated.
-	 */
-
-	rsm		PSW_SM_I, %r19		/* relied upon translation! PA 2.0 Arch. F-5 */
+	/* pcxt_ssm_bug	- relied upon translation! PA 2.0 Arch. F-4 and F-5 */
+	rsm	PSW_SM_I, %r19		/* save I-bit state */
+	load32		PA(1f), %r1
 	nop
 	nop
 	nop
 	nop
 	nop
-	nop
-	nop
-	
-	rsm		PSW_SM_Q, %r0		/* Turn off Q bit to load iia queue */
-	ldil		L%REAL_MODE_PSW, %r1
-	ldo		R%REAL_MODE_PSW(%r1), %r1
-	mtctl		%r1, %cr22
+
+	rsm		PSW_SM_Q, %r0		/* prep to load iia queue */
 	mtctl		%r0, %cr17		/* Clear IIASQ tail */
 	mtctl		%r0, %cr17		/* Clear IIASQ head */
-	ldil		L%PA(1f), %r1
-	ldo		R%PA(1f)(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ head */
 	ldo		4(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ tail */
+	load32		REAL_MODE_PSW, %r1
+	mtctl           %r1, %ipsw
 	rfi
 	nop
 
@@ -178,29 +171,36 @@ fdtonemiddle:					/* Loop if LOOP = 1 */
 	ADDIB>		-1, %r22, fdtoneloop	/* Outer loop count decr */
 	add		%r21, %r20, %r20	/* increment space */
 
-fdtdone:
 
-	/* Switch back to virtual mode */
+fdtdone:
+	/*
+	 * Switch back to virtual mode
+	 */
+	/* pcxt_ssm_bug */
+	rsm		PSW_SM_I, %r0
+	load32		2f, %r1
+	nop
+	nop
+	nop
+	nop
+	nop
 
-	rsm		PSW_SM_Q, %r0		/* clear Q bit to load iia queue */
-	ldil		L%KERNEL_PSW, %r1
-	ldo		R%KERNEL_PSW(%r1), %r1
-	or		%r1, %r19, %r1		/* Set I bit if set on entry */
-	mtctl		%r1, %cr22
+	rsm		PSW_SM_Q, %r0		/* prep to load iia queue */
 	mtctl		%r0, %cr17		/* Clear IIASQ tail */
 	mtctl		%r0, %cr17		/* Clear IIASQ head */
-	ldil		L%(2f), %r1
-	ldo		R%(2f)(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ head */
 	ldo		4(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ tail */
+	load32		KERNEL_PSW, %r1
+	or		%r1, %r19, %r1	/* I-bit to state on entry */
+	mtctl		%r1, %ipsw	/* restore I-bit (entire PSW) */
 	rfi
 	nop
 
 2:      bv		%r0(%r2)
 	nop
-	.exit
 
+	.exit
 	.procend
 
 	.export flush_instruction_cache_local,code
@@ -227,7 +227,7 @@ flush_instruction_cache_local:
 
 fimanyloop:					/* Loop if LOOP >= 2 */
 	ADDIB>		-1, %r31, fimanyloop	/* Adjusted inner loop decr */
-	fice            0(%sr1, %arg0)
+	fice            %r0(%sr1, %arg0)
 	fice,m		%arg1(%sr1, %arg0)	/* Last fice and addr adjust */
 	movb,tr		%arg3, %r31, fimanyloop	/* Re-init inner loop count */
 	ADDIB<=,n	-1, %arg2, fisync	/* Outer loop decr */
@@ -238,7 +238,7 @@ fioneloop:					/* Loop if LOOP = 1 */
 
 fisync:
 	sync
-	mtsm		%r22
+	mtsm		%r22			/* restore I-bit */
 	bv		%r0(%r2)
 	nop
 	.exit
@@ -269,7 +269,7 @@ flush_data_cache_local:
 
 fdmanyloop:					/* Loop if LOOP >= 2 */
 	ADDIB>		-1, %r31, fdmanyloop	/* Adjusted inner loop decr */
-	fdce		0(%sr1, %arg0)
+	fdce		%r0(%sr1, %arg0)
 	fdce,m		%arg1(%sr1, %arg0)	/* Last fdce and addr adjust */
 	movb,tr		%arg3, %r31, fdmanyloop	/* Re-init inner loop count */
 	ADDIB<=,n	-1, %arg2, fdsync	/* Outer loop decr */
@@ -281,7 +281,7 @@ fdoneloop:					/* Loop if LOOP = 1 */
 fdsync:
 	syncdma
 	sync
-	mtsm		%r22
+	mtsm		%r22			/* restore I-bit */
 	bv		%r0(%r2)
 	nop
 	.exit
@@ -296,7 +296,7 @@ copy_user_page_asm:
 	.callinfo NO_CALLS
 	.entry
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* PA8x00 CPUs can consume 2 loads or 1 store per cycle.
 	 * Unroll the loop by hand and arrange insn appropriately.
 	 * GCC probably can do this just as well.
@@ -351,7 +351,11 @@ copy_user_page_asm:
 	std		%r22, 120(%r26)
 	ldo		128(%r26), %r26
 
-	ADDIB>		-1, %r1, 1b		/* bundle 10 */
+	/* conditional branches nullify on forward taken branch, and on
+	 * non-taken backward branch. Note that .+4 is a backwards branch.
+	 * The ldd should only get executed if the branch is taken.
+	 */
+	ADDIB>,n	-1, %r1, 1b		/* bundle 10 */
 	ldd		0(%r25), %r19		/* start next loads */
 
 #else
@@ -363,10 +367,10 @@ copy_user_page_asm:
 	 * the full 64 bit register values on interrupt, we can't
 	 * use ldd/std on a 32 bit kernel.
 	 */
+	ldw		0(%r25), %r19
 	ldi		64, %r1		/* PAGE_SIZE/64 == 64 */
 
 1:
-	ldw		0(%r25), %r19
 	ldw		4(%r25), %r20
 	ldw		8(%r25), %r21
 	ldw		12(%r25), %r22
@@ -396,11 +400,12 @@ copy_user_page_asm:
 	ldw		60(%r25), %r22
 	stw		%r19, 48(%r26)
 	stw		%r20, 52(%r26)
+	ldo		64(%r25), %r25
 	stw		%r21, 56(%r26)
 	stw		%r22, 60(%r26)
 	ldo		64(%r26), %r26
-	ADDIB>		-1, %r1, 1b
-	ldo		64(%r25), %r25
+	ADDIB>,n	-1, %r1, 1b
+	ldw		0(%r25), %r19
 #endif
 	bv		%r0(%r2)
 	nop
@@ -456,7 +461,7 @@ copy_user_page_asm:
 	sub		%r25, %r1, %r23		/* move physical addr into non shadowed reg */
 
 	ldil		L%(TMPALIAS_MAP_START), %r28
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u		%r26,56,32, %r26		/* convert phys addr to tlb insert format */
 	extrd,u		%r23,56,32, %r23		/* convert phys addr to tlb insert format */
 	depd		%r24,63,22, %r28		/* Form aliased virtual address 'to' */
@@ -543,7 +548,7 @@ __clear_user_page_asm:
 	tophys_r1	%r26
 
 	ldil		L%(TMPALIAS_MAP_START), %r28
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #if (TMPALIAS_MAP_START >= 0x80000000)
 	depdi		0, 31,32, %r28		/* clear any sign extension */
 #endif
@@ -560,7 +565,7 @@ __clear_user_page_asm:
 
 	pdtlb		0(%r28)
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldi		32, %r1			/* PAGE_SIZE/128 == 32 */
 
 	/* PREFETCH (Write) has not (yet) been proven to help here */
@@ -585,7 +590,7 @@ __clear_user_page_asm:
 	ADDIB>		-1, %r1, 1b
 	ldo		128(%r28), %r28
 
-#else	/* ! __LP64 */
+#else	/* ! CONFIG_64BIT */
 
 	ldi		64, %r1			/* PAGE_SIZE/64 == 64 */
 
@@ -608,7 +613,7 @@ __clear_user_page_asm:
 	stw		%r0, 60(%r28)
 	ADDIB>		-1, %r1, 1b
 	ldo		64(%r28), %r28
-#endif	/* __LP64 */
+#endif	/* CONFIG_64BIT */
 
 	bv		%r0(%r2)
 	nop
@@ -626,7 +631,7 @@ flush_kernel_dcache_page:
 	ldil		L%dcache_stride, %r1
 	ldw		R%dcache_stride(%r1), %r23
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi,z		1, 63-PAGE_SHIFT,1, %r25
 #else
 	depwi,z		1, 31-PAGE_SHIFT,1, %r25
@@ -670,7 +675,7 @@ flush_user_dcache_page:
 	ldil		L%dcache_stride, %r1
 	ldw		R%dcache_stride(%r1), %r23
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi,z		1,63-PAGE_SHIFT,1, %r25
 #else
 	depwi,z		1,31-PAGE_SHIFT,1, %r25
@@ -714,7 +719,7 @@ flush_user_icache_page:
 	ldil		L%dcache_stride, %r1
 	ldw		R%dcache_stride(%r1), %r23
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi,z		1, 63-PAGE_SHIFT,1, %r25
 #else
 	depwi,z		1, 31-PAGE_SHIFT,1, %r25
@@ -759,7 +764,7 @@ purge_kernel_dcache_page:
 	ldil		L%dcache_stride, %r1
 	ldw		R%dcache_stride(%r1), %r23
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi,z		1, 63-PAGE_SHIFT,1, %r25
 #else
 	depwi,z		1, 31-PAGE_SHIFT,1, %r25
@@ -807,7 +812,7 @@ flush_alias_page:
 	tophys_r1		%r26
 
 	ldil		L%(TMPALIAS_MAP_START), %r28
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u		%r26, 56,32, %r26	/* convert phys addr to tlb insert format */
 	depd		%r25, 63,22, %r28	/* Form aliased virtual address 'to' */
 	depdi		0, 63,12, %r28		/* Clear any offset bits */
@@ -824,7 +829,7 @@ flush_alias_page:
 	ldil		L%dcache_stride, %r1
 	ldw		R%dcache_stride(%r1), %r23
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi,z		1, 63-PAGE_SHIFT,1, %r29
 #else
 	depwi,z		1, 31-PAGE_SHIFT,1, %r29
@@ -935,7 +940,7 @@ flush_kernel_icache_page:
 	ldil		L%icache_stride, %r1
 	ldw		R%icache_stride(%r1), %r23
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	depdi,z		1, 63-PAGE_SHIFT,1, %r25
 #else
 	depwi,z		1, 31-PAGE_SHIFT,1, %r25
@@ -944,23 +949,23 @@ flush_kernel_icache_page:
 	sub		%r25, %r23, %r25
 
 
-1:      fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
-	fic,m		%r23(%r26)
+1:      fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
+	fic,m		%r23(%sr4, %r26)
 	CMPB<<		%r26, %r25, 1b
-	fic,m		%r23(%r26)
+	fic,m		%r23(%sr4, %r26)
 
 	sync
 	bv		%r0(%r2)
@@ -982,17 +987,18 @@ flush_kernel_icache_range_asm:
 	ANDCM		%r26, %r21, %r26
 
 1:      CMPB<<,n	%r26, %r25, 1b
-	fic,m		%r23(%r26)
+	fic,m		%r23(%sr4, %r26)
 
 	sync
 	bv		%r0(%r2)
 	nop
 	.exit
-
 	.procend
 
-	.align	128
-
+	/* align should cover use of rfi in disable_sr_hashing_asm and
+	 * srdis_done.
+	 */
+	.align	256
 	.export disable_sr_hashing_asm,code
 
 disable_sr_hashing_asm:
@@ -1000,28 +1006,26 @@ disable_sr_hashing_asm:
 	.callinfo NO_CALLS
 	.entry
 
-	/* Switch to real mode */
-
-	ssm		0, %r0			/* relied upon translation! */
-	nop
-	nop
+	/*
+	 * Switch to real mode
+	 */
+	/* pcxt_ssm_bug */
+	rsm		PSW_SM_I, %r0
+	load32		PA(1f), %r1
 	nop
 	nop
 	nop
 	nop
 	nop
-	
-	rsm		(PSW_SM_Q|PSW_SM_I), %r0 /* disable Q&I to load the iia queue */
-	ldil		L%REAL_MODE_PSW, %r1
-	ldo		R%REAL_MODE_PSW(%r1), %r1
-	mtctl		%r1, %cr22
+
+	rsm		PSW_SM_Q, %r0		/* prep to load iia queue */
 	mtctl		%r0, %cr17		/* Clear IIASQ tail */
 	mtctl		%r0, %cr17		/* Clear IIASQ head */
-	ldil		L%PA(1f), %r1
-	ldo		R%PA(1f)(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ head */
 	ldo		4(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ tail */
+	load32		REAL_MODE_PSW, %r1
+	mtctl		%r1, %ipsw
 	rfi
 	nop
 
@@ -1053,27 +1057,31 @@ srdis_pcxl:
 
 srdis_pa20:
 
-	/* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+ */
+	/* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+,PCXW2 */
 
 	.word		0x144008bc		/* mfdiag %dr2, %r28 */
 	depdi		0, 54,1, %r28		/* clear DIAG_SPHASH_ENAB (bit 54) */
 	.word		0x145c1840		/* mtdiag %r28, %dr2 */
 
-srdis_done:
 
+srdis_done:
 	/* Switch back to virtual mode */
+	rsm		PSW_SM_I, %r0		/* prep to load iia queue */
+	load32 	   	2f, %r1
+	nop
+	nop
+	nop
+	nop
+	nop
 
-	rsm		PSW_SM_Q, %r0		/* clear Q bit to load iia queue */
-	ldil		L%KERNEL_PSW, %r1
-	ldo		R%KERNEL_PSW(%r1), %r1
-	mtctl		%r1, %cr22
+	rsm		PSW_SM_Q, %r0		/* prep to load iia queue */
 	mtctl		%r0, %cr17		/* Clear IIASQ tail */
 	mtctl		%r0, %cr17		/* Clear IIASQ head */
-	ldil 	   	L%(2f), %r1
-	ldo     	R%(2f)(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ head */
 	ldo		4(%r1), %r1
 	mtctl		%r1, %cr18		/* IIAOQ tail */
+	load32		KERNEL_PSW, %r1
+	mtctl		%r1, %ipsw
 	rfi
 	nop
 
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index 368cc095c99f..f94a02ef3d95 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -31,7 +31,7 @@
 #include <asm/page.h>	/* get_order */
 #include <asm/pgalloc.h>
 #include <asm/uaccess.h>
-
+#include <asm/tlbflush.h>	/* for purge_tlb_*() macros */
 
 static struct proc_dir_entry * proc_gsc_root = NULL;
 static int pcxl_proc_info(char *buffer, char **start, off_t offset, int length);
@@ -114,7 +114,7 @@ static inline int map_pmd_uncached(pmd_t * pmd, unsigned long vaddr,
 	if (end > PGDIR_SIZE)
 		end = PGDIR_SIZE;
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, vaddr);
+		pte_t * pte = pte_alloc_kernel(pmd, vaddr);
 		if (!pte)
 			return -ENOMEM;
 		if (map_pte_uncached(pte, orig_vaddr, end - vaddr, paddr_ptr))
@@ -333,23 +333,33 @@ pcxl_free_range(unsigned long vaddr, size_t size)
 static int __init
 pcxl_dma_init(void)
 {
-    if (pcxl_dma_start == 0)
-	return 0;
+	if (pcxl_dma_start == 0)
+		return 0;
 
-    spin_lock_init(&pcxl_res_lock);
-    pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3);
-    pcxl_res_hint = 0;
-    pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL,
+	spin_lock_init(&pcxl_res_lock);
+	pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3);
+	pcxl_res_hint = 0;
+	pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL,
 					    get_order(pcxl_res_size));
-    memset(pcxl_res_map, 0, pcxl_res_size);
-    proc_gsc_root = proc_mkdir("gsc", 0);
-    create_proc_info_entry("dino", 0, proc_gsc_root, pcxl_proc_info);
-    return 0;
+	memset(pcxl_res_map, 0, pcxl_res_size);
+	proc_gsc_root = proc_mkdir("gsc", 0);
+	if (!proc_gsc_root)
+    		printk(KERN_WARNING
+			"pcxl_dma_init: Unable to create gsc /proc dir entry\n");
+	else {
+		struct proc_dir_entry* ent;
+		ent = create_proc_info_entry("pcxl_dma", 0,
+				proc_gsc_root, pcxl_proc_info);
+		if (!ent)
+			printk(KERN_WARNING
+				"pci-dma.c: Unable to create pcxl_dma /proc entry.\n");
+	}
+	return 0;
 }
 
 __initcall(pcxl_dma_init);
 
-static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flag)
+static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag)
 {
 	unsigned long vaddr;
 	unsigned long paddr;
@@ -502,13 +512,13 @@ struct hppa_dma_ops pcxl_dma_ops = {
 };
 
 static void *fail_alloc_consistent(struct device *dev, size_t size,
-				   dma_addr_t *dma_handle, int flag)
+				   dma_addr_t *dma_handle, gfp_t flag)
 {
 	return NULL;
 }
 
 static void *pa11_dma_alloc_noncoherent(struct device *dev, size_t size,
-					  dma_addr_t *dma_handle, int flag)
+					  dma_addr_t *dma_handle, gfp_t flag)
 {
 	void *addr = NULL;
 
@@ -545,16 +555,16 @@ struct hppa_dma_ops pcx_dma_ops = {
 
 static int pcxl_proc_info(char *buf, char **start, off_t offset, int len)
 {
+#if 0
 	u_long i = 0;
 	unsigned long *res_ptr = (u_long *)pcxl_res_map;
-	unsigned long total_pages = pcxl_res_size << 3;        /* 8 bits per byte */
+#endif
+	unsigned long total_pages = pcxl_res_size << 3;   /* 8 bits per byte */
 
-	sprintf(buf, "\nDMA Mapping Area size    : %d bytes (%d pages)\n",
-		PCXL_DMA_MAP_SIZE,
-		(pcxl_res_size << 3) ); /* 1 bit per page */
+	sprintf(buf, "\nDMA Mapping Area size    : %d bytes (%ld pages)\n",
+		PCXL_DMA_MAP_SIZE, total_pages);
 	
-	sprintf(buf, "%sResource bitmap : %d bytes (%d pages)\n", 
-		buf, pcxl_res_size, pcxl_res_size << 3);   /* 8 bits per byte */
+	sprintf(buf, "%sResource bitmap : %d bytes\n", buf, pcxl_res_size);
 
 	strcat(buf,  "     	  total:    free:    used:   % used:\n");
 	sprintf(buf, "%sblocks  %8d %8ld %8ld %8ld%%\n", buf, pcxl_res_size,
@@ -564,7 +574,8 @@ static int pcxl_proc_info(char *buf, char **start, off_t offset, int len)
 	sprintf(buf, "%spages   %8ld %8ld %8ld %8ld%%\n", buf, total_pages,
 		total_pages - pcxl_used_pages, pcxl_used_pages,
 		(pcxl_used_pages * 100 / total_pages));
-	
+
+#if 0
 	strcat(buf, "\nResource bitmap:");
 
 	for(; i < (pcxl_res_size / sizeof(u_long)); ++i, ++res_ptr) {
@@ -572,6 +583,7 @@ static int pcxl_proc_info(char *buf, char **start, off_t offset, int len)
 		    strcat(buf,"\n   ");
 		sprintf(buf, "%s %08lx", buf, *res_ptr);
 	}
+#endif
 	strcat(buf, "\n");
 	return strlen(buf);
 }
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index e6a891a0cad0..88cba49c5301 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -202,7 +202,8 @@ static void
 pcibios_link_hba_resources( struct resource *hba_res, struct resource *r)
 {
 	if (!r->parent) {
-		printk(KERN_EMERG "PCI: Tell willy he's wrong\n");
+		printk(KERN_EMERG "PCI: resource not parented! [%lx-%lx]\n",
+				r->start, r->end);
 		r->parent = hba_res;
 
 		/* reverse link is harder *sigh*  */
diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c
index 01f676d1673b..215d78c87bc5 100644
--- a/arch/parisc/kernel/pdc_cons.c
+++ b/arch/parisc/kernel/pdc_cons.c
@@ -41,7 +41,7 @@
 
 /* Define EARLY_BOOTUP_DEBUG to debug kernel related boot problems. 
  * On production kernels EARLY_BOOTUP_DEBUG should be undefined. */
-#undef EARLY_BOOTUP_DEBUG
+#define EARLY_BOOTUP_DEBUG
 
 
 #include <linux/config.h>
@@ -49,14 +49,8 @@
 #include <linux/console.h>
 #include <linux/string.h>
 #include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
 #include <linux/major.h>
 #include <linux/tty.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <asm/system.h>
 #include <asm/pdc.h>		/* for iodc_call() proto and friends */
 
 
@@ -96,7 +90,6 @@ static int pdc_console_setup(struct console *co, char *options)
 }
 
 #if defined(CONFIG_PDC_CONSOLE)
-#define PDC_CONSOLE_DEVICE pdc_console_device
 static struct tty_driver * pdc_console_device (struct console *c, int *index)
 {
 	extern struct tty_driver console_driver;
@@ -104,22 +97,19 @@ static struct tty_driver * pdc_console_device (struct console *c, int *index)
 	return &console_driver;
 }
 #else
-#define PDC_CONSOLE_DEVICE NULL
+#define pdc_console_device NULL
 #endif
 
 static struct console pdc_cons = {
 	.name =		"ttyB",
 	.write =	pdc_console_write,
-	.device =	PDC_CONSOLE_DEVICE,
+	.device =	pdc_console_device,
 	.setup =	pdc_console_setup,
-	.flags =	CON_BOOT|CON_PRINTBUFFER|CON_ENABLED,
+	.flags =	CON_BOOT | CON_PRINTBUFFER | CON_ENABLED,
 	.index =	-1,
 };
 
 static int pdc_console_initialized;
-extern unsigned long con_start;	/* kernel/printk.c */
-extern unsigned long log_end;	/* kernel/printk.c */
-
 
 static void pdc_console_init_force(void)
 {
@@ -146,27 +136,11 @@ void __init pdc_console_init(void)
 }
 
 
-/* Unregister the pdc console with the printk console layer */
-void pdc_console_die(void)
-{
-	if (!pdc_console_initialized)
-		return;
-	--pdc_console_initialized;
-
-	printk(KERN_INFO "Switching from PDC console\n");
-
-	/* Don't repeat what we've already printed */
-	con_start = log_end;
-
-	unregister_console(&pdc_cons);
-}
-
-
 /*
  * Used for emergencies. Currently only used if an HPMC occurs. If an
  * HPMC occurs, it is possible that the current console may not be
- * properly initialed after the PDC IO reset. This routine unregisters all
- * of the current consoles, reinitializes the pdc console and
+ * properly initialised after the PDC IO reset. This routine unregisters
+ * all of the current consoles, reinitializes the pdc console and
  * registers it.
  */
 
@@ -177,13 +151,13 @@ void pdc_console_restart(void)
 	if (pdc_console_initialized)
 		return;
 
+	/* If we've already seen the output, don't bother to print it again */
+	if (console_drivers != NULL)
+		pdc_cons.flags &= ~CON_PRINTBUFFER;
+
 	while ((console = console_drivers) != NULL)
 		unregister_console(console_drivers);
 
-	/* Don't repeat what we've already printed */
-	con_start = log_end;
-	
 	/* force registering the pdc console */
 	pdc_console_init_force();
 }
-
diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c
index b3ad0a505b87..44670d6e06f4 100644
--- a/arch/parisc/kernel/perf.c
+++ b/arch/parisc/kernel/perf.c
@@ -746,7 +746,8 @@ static int perf_write_image(uint64_t *memaddr)
 	uint64_t *bptr;
 	uint32_t dwords;
 	uint32_t *intrigue_rdr;
-	uint64_t *intrigue_bitmask, tmp64, proc_hpa;
+	uint64_t *intrigue_bitmask, tmp64;
+	void __iomem *runway;
 	struct rdr_tbl_ent *tentry;
 	int i;
 
@@ -798,15 +799,16 @@ static int perf_write_image(uint64_t *memaddr)
 		return -1;
 	}
 
-	proc_hpa = cpu_device->hpa;
+	runway = ioremap(cpu_device->hpa.start, 4096);
 
 	/* Merge intrigue bits into Runway STATUS 0 */
-	tmp64 = __raw_readq(proc_hpa + RUNWAY_STATUS) & 0xffecfffffffffffful;
-	__raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), proc_hpa + RUNWAY_STATUS);
+	tmp64 = __raw_readq(runway + RUNWAY_STATUS) & 0xffecfffffffffffful;
+	__raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), 
+		     runway + RUNWAY_STATUS);
 	
 	/* Write RUNWAY DEBUG registers */
 	for (i = 0; i < 8; i++) {
-		__raw_writeq(*memaddr++, proc_hpa + RUNWAY_DEBUG + i);
+		__raw_writeq(*memaddr++, runway + RUNWAY_DEBUG);
 	}
 
 	return 0; 
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 46b759385115..7fdca87ef647 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -9,7 +9,7 @@
  *    Copyright (C) 2000-2003 Paul Bame <bame at parisc-linux.org>
  *    Copyright (C) 2000 Philipp Rumpf <prumpf with tux.org>
  *    Copyright (C) 2000 David Kennedy <dkennedy with linuxcare.com>
- *    Copyright (C) 2000 Richard Hirst <rhirst with parisc-lixux.org>
+ *    Copyright (C) 2000 Richard Hirst <rhirst with parisc-linux.org>
  *    Copyright (C) 2000 Grant Grundler <grundler with parisc-linux.org>
  *    Copyright (C) 2001 Alan Modra <amodra at parisc-linux.org>
  *    Copyright (C) 2001-2002 Ryan Bradetich <rbrad at parisc-linux.org>
@@ -245,7 +245,17 @@ int
 sys_clone(unsigned long clone_flags, unsigned long usp,
 	  struct pt_regs *regs)
 {
-	int __user *user_tid = (int __user *)regs->gr[26];
+  	/* Arugments from userspace are:
+	   r26 = Clone flags.
+	   r25 = Child stack.
+	   r24 = parent_tidptr.
+	   r23 = Is the TLS storage descriptor 
+	   r22 = child_tidptr 
+	   
+	   However, these last 3 args are only examined
+	   if the proper flags are set. */
+	int __user *child_tidptr;
+	int __user *parent_tidptr;
 
 	/* usp must be word aligned.  This also prevents users from
 	 * passing in the value 1 (which is the signal for a special
@@ -253,10 +263,20 @@ sys_clone(unsigned long clone_flags, unsigned long usp,
 	usp = ALIGN(usp, 4);
 
 	/* A zero value for usp means use the current stack */
-	if(usp == 0)
-		usp = regs->gr[30];
+	if (usp == 0)
+	  usp = regs->gr[30];
 
-	return do_fork(clone_flags, usp, regs, 0, user_tid, NULL);
+	if (clone_flags & CLONE_PARENT_SETTID)
+	  parent_tidptr = (int __user *)regs->gr[24];
+	else
+	  parent_tidptr = NULL;
+	
+	if (clone_flags & (CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID))
+	  child_tidptr = (int __user *)regs->gr[22];
+	else
+	  child_tidptr = NULL;
+
+	return do_fork(clone_flags, usp, regs, 0, parent_tidptr, child_tidptr);
 }
 
 int
@@ -332,6 +352,10 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 		} else {
 			cregs->kpc = (unsigned long) &child_return;
 		}
+		/* Setup thread TLS area from the 4th parameter in clone */
+		if (clone_flags & CLONE_SETTLS)
+		  cregs->cr27 = pregs->gr[23];
+	
 	}
 
 	return 0;
diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c
index 13b721cb9f55..4f5bbcf1f5a4 100644
--- a/arch/parisc/kernel/processor.c
+++ b/arch/parisc/kernel/processor.c
@@ -92,7 +92,7 @@ static int __init processor_probe(struct parisc_device *dev)
 	 * May get overwritten by PAT code.
 	 */
 	cpuid = boot_cpu_data.cpu_count;
-	txn_addr = dev->hpa;	/* for legacy PDC */
+	txn_addr = dev->hpa.start;	/* for legacy PDC */
 
 #ifdef __LP64__
 	if (is_pdc_pat()) {
@@ -122,7 +122,7 @@ static int __init processor_probe(struct parisc_device *dev)
  * boot time (ie shutdown a CPU from an OS perspective).
  */
 		/* get the cpu number */
-		status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa);
+		status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa.start);
 
 		BUG_ON(PDC_OK != status);
 
@@ -130,7 +130,7 @@ static int __init processor_probe(struct parisc_device *dev)
 			printk(KERN_WARNING "IGNORING CPU at 0x%x,"
 				" cpu_slot_id > NR_CPUS"
 				" (%ld > %d)\n",
-				dev->hpa, cpu_info.cpu_num, NR_CPUS);
+				dev->hpa.start, cpu_info.cpu_num, NR_CPUS);
 			/* Ignore CPU since it will only crash */
 			boot_cpu_data.cpu_count--;
 			return 1;
@@ -149,7 +149,7 @@ static int __init processor_probe(struct parisc_device *dev)
 
 	p->loops_per_jiffy = loops_per_jiffy;
 	p->dev = dev;		/* Save IODC data in case we need it */
-	p->hpa = dev->hpa;	/* save CPU hpa */
+	p->hpa = dev->hpa.start;	/* save CPU hpa */
 	p->cpuid = cpuid;	/* save CPU id */
 	p->txn_addr = txn_addr;	/* save CPU IRQ address */
 #ifdef CONFIG_SMP
diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c
index f3428e5e86fb..18130c3748f3 100644
--- a/arch/parisc/kernel/ptrace.c
+++ b/arch/parisc/kernel/ptrace.c
@@ -78,7 +78,7 @@ void ptrace_disable(struct task_struct *child)
 	pa_psw(child)->l = 0;
 }
 
-long sys_ptrace(long request, pid_t pid, long addr, long data)
+long sys_ptrace(long request, long pid, long addr, long data)
 {
 	struct task_struct *child;
 	long ret;
diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S
index 8dd5defb7316..8c2859cca77e 100644
--- a/arch/parisc/kernel/real2.S
+++ b/arch/parisc/kernel/real2.S
@@ -7,8 +7,10 @@
  * Copyright (C) 2000 Hewlett Packard (Paul Bame bame@puffin.external.hp.com)
  *
  */
-#include <asm/assembly.h>
+#include <linux/config.h>
+
 #include <asm/psw.h>
+#include <asm/assembly.h>
 
 	.section	.bss
 	.export real_stack
@@ -20,7 +22,7 @@ real32_stack:
 real64_stack:
 	.block	8192
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #  define REG_SZ 8
 #else
 #  define REG_SZ 4
@@ -50,7 +52,7 @@ save_cr_end:
 
 real32_call_asm:
 	STREG	%rp, -RP_OFFSET(%sp)	/* save RP */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	callee_save
 	ldo	2*REG_SZ(%sp), %sp	/* room for a couple more saves */
 	STREG	%r27, -1*REG_SZ(%sp)
@@ -77,7 +79,7 @@ real32_call_asm:
 	b,l	save_control_regs,%r2		/* modifies r1, r2, r28 */
 	nop
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	rsm	PSW_SM_W, %r0		/* go narrow */
 #endif
 
@@ -85,7 +87,7 @@ real32_call_asm:
 	bv	0(%r31)
 	nop
 ric_ret:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ssm	PSW_SM_W, %r0		/* go wide */
 #endif
 	/* restore CRs before going virtual in case we page fault */
@@ -97,7 +99,7 @@ ric_ret:
 
 	tovirt_r1 %sp
 	LDREG	-REG_SZ(%sp), %sp	/* restore SP */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	LDREG	-1*REG_SZ(%sp), %r27
 	LDREG	-2*REG_SZ(%sp), %r29
 	ldo	-2*REG_SZ(%sp), %sp
@@ -143,24 +145,21 @@ restore_control_regs:
 /* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for
  * more general-purpose use by the several places which need RFIs
  */
-	.align 128
 	.text
+	.align 128
 rfi_virt2real:
 	/* switch to real mode... */
-	ssm		0,0		/* See "relied upon translation" */
-	nop				/* PA 2.0 Arch. F-5 */
-	nop
-	nop
+	rsm		PSW_SM_I,%r0
+	load32		PA(rfi_v2r_1), %r1
 	nop
 	nop
 	nop
 	nop
 	nop
 	
-	rsm             (PSW_SM_Q|PSW_SM_I),%r0  /* disable Q & I bits to load iia queue */
+	rsm             PSW_SM_Q,%r0  /* disable Q & I bits to load iia queue */
 	mtctl		%r0, %cr17	/* Clear IIASQ tail */
 	mtctl		%r0, %cr17	/* Clear IIASQ head */
-	load32		PA(rfi_v2r_1), %r1
 	mtctl		%r1, %cr18	/* IIAOQ head */
 	ldo		4(%r1), %r1
 	mtctl		%r1, %cr18	/* IIAOQ tail */
@@ -184,10 +183,8 @@ rfi_v2r_1:
 	.text
 	.align 128
 rfi_real2virt:
-	ssm		0,0		/* See "relied upon translation" */
-	nop				/* PA 2.0 Arch. F-5 */
-	nop
-	nop
+	rsm		PSW_SM_I,%r0
+	load32		(rfi_r2v_1), %r1
 	nop
 	nop
 	nop
@@ -197,7 +194,6 @@ rfi_real2virt:
 	rsm             PSW_SM_Q,%r0    /* disable Q bit to load iia queue */
 	mtctl		%r0, %cr17	/* Clear IIASQ tail */
 	mtctl		%r0, %cr17	/* Clear IIASQ head */
-	load32		(rfi_r2v_1), %r1
 	mtctl		%r1, %cr18	/* IIAOQ head */
 	ldo		4(%r1), %r1
 	mtctl		%r1, %cr18	/* IIAOQ tail */
@@ -218,7 +214,7 @@ rfi_r2v_1:
 	bv	0(%r2)
 	nop
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 
 /************************ 64-bit real-mode calls ***********************/
 /* This is only usable in wide kernels right now and will probably stay so */
@@ -296,7 +292,7 @@ pc_in_user_space:
 	**	comparing function pointers.
 	*/
 __canonicalize_funcptr_for_compare:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	bve (%r2)
 #else
 	bv %r0(%r2)
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 0224651fd8f1..82c24e62ab63 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -490,15 +490,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 
 give_sigsegv:
 	DBG(1,"setup_rt_frame: sending SIGSEGV\n");
-	if (sig == SIGSEGV)
-		ka->sa.sa_handler = SIG_DFL;
-	si.si_signo = SIGSEGV;
-	si.si_errno = 0;
-	si.si_code = SI_KERNEL;
-	si.si_pid = current->pid;
-	si.si_uid = current->uid;
-	si.si_addr = frame;
-	force_sig_info(SIGSEGV, &si, current);
+	force_sigsegv(sig, current);
 	return 0;
 }
 
@@ -633,10 +625,14 @@ do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall)
 			put_user(0xe0008200, &usp[3]);
 			put_user(0x34140000, &usp[4]);
 
-			/* Stack is 64-byte aligned, and we only 
-			 * need to flush 1 cache line */
-			asm("fdc 0(%%sr3, %0)\n"
-			    "fic 0(%%sr3, %0)\n"
+			/* Stack is 64-byte aligned, and we only need
+			 * to flush 1 cache line.
+			 * Flushing one cacheline is cheap.
+			 * "sync" on bigger (> 4 way) boxes is not.
+			 */
+			asm("fdc %%r0(%%sr3, %0)\n"
+			    "sync\n"
+			    "fic %%r0(%%sr3, %0)\n"
 			    "sync\n"
 			    : : "r"(regs->gr[30]));
 
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index bcc7e83f5142..5db3be4e2704 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -18,7 +18,7 @@
 */
 #undef ENTRY_SYS_CPUS	/* syscall support for iCOD-like functionality */
 
-#include <linux/autoconf.h>
+#include <linux/config.h>
 
 #include <linux/types.h>
 #include <linux/spinlock.h>
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index 8c7a7185cd3b..b29b76b42bb7 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -6,6 +6,7 @@
  * thanks to Philipp Rumpf, Mike Shaver and various others
  * sorry about the wall, puffin..
  */
+#include <linux/config.h> /* for CONFIG_SMP */
 
 #include <asm/asm-offsets.h>
 #include <asm/unistd.h>
@@ -22,15 +23,13 @@
 	 */
 #define KILL_INSN	break	0,0
 
-#include <linux/config.h> /* for CONFIG_SMP */
-
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	.level          2.0w
 #else
 	.level		1.1
 #endif
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	.macro fixup_branch,lbl
 	b	    \lbl
 	.endm
@@ -103,7 +102,7 @@ linux_gateway_entry:
 	mfsp    %sr7,%r1                        /* save user sr7 */
 	mtsp    %r1,%sr3                        /* and store it in sr3 */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* for now we can *always* set the W bit on entry to the syscall
 	 * since we don't support wide userland processes.  We could
 	 * also save the current SM other than in r0 and restore it on
@@ -155,7 +154,7 @@ linux_gateway_entry:
 	STREG	%r19, TASK_PT_GR19(%r1)
 
 	LDREGM	-FRAME_SIZE(%r30), %r2		/* get users sp back */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u	%r2,63,1,%r19			/* W hidden in bottom bit */
 #if 0
 	xor	%r19,%r2,%r2			/* clear bottom bit */
@@ -186,7 +185,7 @@ linux_gateway_entry:
 
 	loadgp
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
 	copy	%r19,%r2			/* W bit back to r2 */
 #else
@@ -205,7 +204,7 @@ linux_gateway_entry:
 	/* Note!  We cannot use the syscall table that is mapped
 	nearby since the gateway page is mapped execute-only. */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldil	L%sys_call_table, %r1
 	or,=	%r2,%r2,%r2
 	addil	L%(sys_call_table64-sys_call_table), %r1
@@ -321,7 +320,7 @@ tracesys_next:
 	LDREG   TASK_PT_GR25(%r1), %r25
 	LDREG   TASK_PT_GR24(%r1), %r24
 	LDREG   TASK_PT_GR23(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	LDREG   TASK_PT_GR22(%r1), %r22
 	LDREG   TASK_PT_GR21(%r1), %r21
 	ldo	-16(%r30),%r29			/* Reference param save area */
@@ -350,7 +349,7 @@ tracesys_next:
 tracesys_exit:
 	ldo     -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1      /* get task ptr */
 	LDREG	TI_TASK(%r1), %r1
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
 #endif
 	bl	syscall_trace, %r2
@@ -371,7 +370,7 @@ tracesys_exit:
 tracesys_sigexit:
 	ldo     -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1      /* get task ptr */
 	LDREG	0(%r1), %r1
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
 #endif
 	bl	syscall_trace, %r2
@@ -404,7 +403,7 @@ lws_start:
 	gate	.+8, %r0
 	depi	3, 31, 2, %r31	/* Ensure we return to userspace */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* FIXME: If we are a 64-bit kernel just
 	 *        turn this on unconditionally.
 	 */
@@ -440,7 +439,7 @@ lws_exit_nosys:
 	/* Fall through: Return to userspace */
 
 lws_exit:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* decide whether to reset the wide mode bit
 	 *
 	 * For a syscall, the W bit is stored in the lowest bit
@@ -486,7 +485,7 @@ lws_exit:
 
 	/* ELF64 Process entry path */
 lws_compare_and_swap64:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	b,n	lws_compare_and_swap
 #else
 	/* If we are not a 64-bit kernel, then we don't
@@ -497,7 +496,7 @@ lws_compare_and_swap64:
 
 	/* ELF32 Process entry path */
 lws_compare_and_swap32:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* Clip all the input registers */
 	depdi	0, 31, 32, %r26
 	depdi	0, 31, 32, %r25
@@ -608,7 +607,7 @@ cas_action:
 	   the other for the store. Either return -EFAULT.
 	   Each of the entries must be relocated. */
 	.section __ex_table,"aw"
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* Pad the address calculation */
 	.word	0,(2b - linux_gateway_page)
 	.word	0,(3b - linux_gateway_page)
@@ -619,7 +618,7 @@ cas_action:
 	.previous
 
 	.section __ex_table,"aw"
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* Pad the address calculation */
 	.word	0,(1b - linux_gateway_page)
 	.word	0,(3b - linux_gateway_page)
@@ -638,7 +637,7 @@ end_linux_gateway_page:
 
 	/* Relocate symbols assuming linux_gateway_page is mapped
 	   to virtual address 0x0 */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	/* FIXME: The code will always be on the gateay page
 		  and thus it will be on the first 4k, the
 		  assembler seems to think that the final
@@ -666,7 +665,7 @@ lws_table:
 sys_call_table:
 #include "syscall_table.S"
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	.align 4096
 	.export sys_call_table64
 .Lsys_call_table64:
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index dcfa4d3d0e7d..32cbc0489324 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -35,7 +35,7 @@
 #undef ENTRY_UHOH
 #undef ENTRY_COMP
 #undef ENTRY_OURS
-#if defined(__LP64__) && !defined(SYSCALL_TABLE_64BIT)
+#if defined(CONFIG_64BIT) && !defined(SYSCALL_TABLE_64BIT)
 /* Use ENTRY_SAME for 32-bit syscalls which are the same on wide and
  * narrow palinux.  Use ENTRY_DIFF for those where a 32-bit specific
  * implementation is required on wide palinux.  Use ENTRY_COMP where
@@ -46,7 +46,7 @@
 #define ENTRY_UHOH(_name_) .dword sys32_##unimplemented
 #define ENTRY_OURS(_name_) .dword parisc_##_name_
 #define ENTRY_COMP(_name_) .dword compat_sys_##_name_
-#elif defined(__LP64__) && defined(SYSCALL_TABLE_64BIT)
+#elif defined(CONFIG_64BIT) && defined(SYSCALL_TABLE_64BIT)
 #define ENTRY_SAME(_name_) .dword sys_##_name_
 #define ENTRY_DIFF(_name_) .dword sys_##_name_
 #define ENTRY_UHOH(_name_) .dword sys_##_name_
@@ -368,5 +368,11 @@
 	ENTRY_COMP(mbind)		/* 260 */
 	ENTRY_COMP(get_mempolicy)
 	ENTRY_COMP(set_mempolicy)
+	ENTRY_SAME(ni_syscall)	/* 263: reserved for vserver */
+	ENTRY_SAME(add_key)
+	ENTRY_SAME(request_key)		/* 265 */
+	ENTRY_SAME(keyctl)
+	ENTRY_SAME(ioprio_set)
+	ENTRY_SAME(ioprio_get)
 	/* Nothing yet */
 
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 7ff67f8e9f8c..cded25680787 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -33,10 +33,6 @@
 
 #include <linux/timex.h>
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 /* xtime and wall_jiffies keep wall-clock time */
 extern unsigned long wall_jiffies;
 
@@ -89,14 +85,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		}
 	}
     
-#ifdef CONFIG_CHASSIS_LCD_LED
-	/* Only schedule the led tasklet on cpu 0, and only if it
-	 * is enabled.
-	 */
-	if (cpu == 0 && !atomic_read(&led_tasklet.count))
-		tasklet_schedule(&led_tasklet);
-#endif
-
 	/* check soft power switch status */
 	if (cpu == 0 && !atomic_read(&power_tasklet.count))
 		tasklet_schedule(&power_tasklet);
@@ -104,6 +92,24 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	return IRQ_HANDLED;
 }
 
+
+unsigned long profile_pc(struct pt_regs *regs)
+{
+	unsigned long pc = instruction_pointer(regs);
+
+	if (regs->gr[0] & PSW_N)
+		pc -= 4;
+
+#ifdef CONFIG_SMP
+	if (in_lock_functions(pc))
+		pc = regs->gr[2];
+#endif
+
+	return pc;
+}
+EXPORT_SYMBOL(profile_pc);
+
+
 /*** converted from ia64 ***/
 /*
  * Return the number of micro-seconds that elapsed since the last
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index d2e5b229a2f4..15914f0235a0 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -74,7 +74,10 @@ void show_regs(struct pt_regs *regs)
 	char *level;
 	unsigned long cr30;
 	unsigned long cr31;
-
+	/* carlos says that gcc understands better memory in a struct,
+	 * and it makes our life easier with fpregs -- T-Bone */
+	struct { u32 sw[2]; } s;
+	
 	level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT;
 
 	printk("%s\n", level); /* don't want to have that pretty register dump messed up */
@@ -103,11 +106,33 @@ void show_regs(struct pt_regs *regs)
 		printk("%s\n", buf);
 	}
 
-#if RIDICULOUSLY_VERBOSE
-	for (i = 0; i < 32; i += 2)
-		printk("%sFR%02d : %016lx  FR%2d : %016lx", level, i,
-				regs->fr[i], i+1, regs->fr[i+1]);
-#endif
+	/* FR are 64bit everywhere. Need to use asm to get the content
+	 * of fpsr/fper1, and we assume that we won't have a FP Identify
+	 * in our way, otherwise we're screwed.
+	 * The fldd is used to restore the T-bit if there was one, as the
+	 * store clears it anyway.
+	 * BTW, PA2.0 book says "thou shall not use fstw on FPSR/FPERs". */ 
+	__asm__ (
+		"fstd %%fr0,0(%1)	\n\t"
+		"fldd 0(%1),%%fr0	\n\t"
+		: "=m" (s) : "r" (&s) : "%r0"
+		);
+
+	printk("%s\n", level);
+	printk("%s      VZOUICununcqcqcqcqcqcrmunTDVZOUI\n", level);
+	printbinary(buf, s.sw[0], 32);
+	printk("%sFPSR: %s\n", level, buf);
+	printk("%sFPER1: %08x\n", level, s.sw[1]);
+
+	/* here we'll print fr0 again, tho it'll be meaningless */
+	for (i = 0; i < 32; i += 4) {
+		int j;
+		p = buf;
+		p += sprintf(p, "%sfr%02d-%02d ", level, i, i + 3);
+		for (j = 0; j < 4; j++)
+			p += sprintf(p, " %016llx", (i+j) == 0 ? 0 : regs->fr[i+j]);
+		printk("%s\n", buf);
+	}
 
 	cr30 = mfctl(30);
 	cr31 = mfctl(31);
diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c
index 62eea35bcd69..eaae8a021f9f 100644
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -513,15 +513,18 @@ void handle_unaligned(struct pt_regs *regs)
 	register int flop=0;	/* true if this is a flop */
 
 	/* log a message with pacing */
-	if (user_mode(regs))
-	{
-		if (unaligned_count > 5 && jiffies - last_time > 5*HZ)
-		{
+	if (user_mode(regs)) {
+		if (current->thread.flags & PARISC_UAC_SIGBUS) {
+			goto force_sigbus;
+		}
+
+		if (unaligned_count > 5 && jiffies - last_time > 5*HZ) {
 			unaligned_count = 0;
 			last_time = jiffies;
 		}
-		if (++unaligned_count < 5)
-		{
+
+		if (!(current->thread.flags & PARISC_UAC_NOPRINT) 
+		    && ++unaligned_count < 5) {
 			char buf[256];
 			sprintf(buf, "%s(%d): unaligned access to 0x" RFMT " at ip=0x" RFMT "\n",
 				current->comm, current->pid, regs->ior, regs->iaoq[0]);
@@ -530,6 +533,7 @@ void handle_unaligned(struct pt_regs *regs)
 			show_regs(regs);
 #endif		
 		}
+
 		if (!unaligned_enabled)
 			goto force_sigbus;
 	}
diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S
index 1b91612ed964..e0661c2978ed 100644
--- a/arch/parisc/lib/fixup.S
+++ b/arch/parisc/lib/fixup.S
@@ -35,7 +35,7 @@
 	extrd,u \t2,63,32,\t2
 #endif
 	/* t2 = &__per_cpu_offset[smp_processor_id()]; */
-	LDREG,s \t2(\t1),\t2 
+	LDREGX \t2(\t1),\t2 
 	addil LT%per_cpu__exception_data,%r27
 	LDREG RT%per_cpu__exception_data(%r1),\t1
 	/* t1 = &__get_cpu_var(exception_data) */
@@ -53,6 +53,8 @@
 	.endm
 #endif
 
+	.level LEVEL
+
 	.text
 	.section .fixup, "ax"
 
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index feb1b9f42c2b..b7098035321f 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -339,6 +339,7 @@ unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len)
 	pds = (double *)pcs;
 	pdd = (double *)pcd;
 
+#if 0
 	/* Copy 8 doubles at a time */
 	while (len >= 8*sizeof(double)) {
 		register double r1, r2, r3, r4, r5, r6, r7, r8;
@@ -366,6 +367,7 @@ unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len)
 		fstdma(d_space, r8, pdd, pmc_store_exc);
 		len -= 8*sizeof(double);
 	}
+#endif
 
 	pws = (unsigned int *)pds;
 	pwd = (unsigned int *)pdd;
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 2886ad70db48..29b998e430e6 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -505,7 +505,9 @@ void show_mem(void)
 
 		for (j = node_start_pfn(i); j < node_end_pfn(i); j++) {
 			struct page *p;
+			unsigned long flags;
 
+			pgdat_resize_lock(NODE_DATA(i), &flags);
 			p = nid_page_nr(i, j) - node_start_pfn(i);
 
 			total++;
@@ -517,6 +519,7 @@ void show_mem(void)
 				free++;
 			else
 				shared += page_count(p) - 1;
+			pgdat_resize_unlock(NODE_DATA(i), &flags);
         	}
 	}
 #endif
diff --git a/arch/parisc/mm/ioremap.c b/arch/parisc/mm/ioremap.c
index f2df502cdae3..5c7a1b3b9326 100644
--- a/arch/parisc/mm/ioremap.c
+++ b/arch/parisc/mm/ioremap.c
@@ -52,7 +52,7 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned lo
 	if (address >= end)
 		BUG();
 	do {
-		pte_t * pte = pte_alloc_kernel(NULL, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -75,10 +75,9 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 	flush_cache_all();
 	if (address >= end)
 		BUG();
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		pmd_t *pmd;
-		pmd = pmd_alloc(dir, address);
+		pmd = pmd_alloc(&init_mm, dir, address);
 		error = -ENOMEM;
 		if (!pmd)
 			break;
@@ -89,7 +88,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	} while (address && (address < end));
-	spin_unlock(&init_mm.page_table_lock);
 	flush_tlb_all();
 	return error;
 }
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index e43e8ef70088..117b00012e14 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -102,6 +102,83 @@ pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 }
 EXPORT_SYMBOL(phys_mem_access_prot);
 
+#ifdef CONFIG_MEMORY_HOTPLUG
+
+void online_page(struct page *page)
+{
+	ClearPageReserved(page);
+	free_cold_page(page);
+	totalram_pages++;
+	num_physpages++;
+}
+
+/*
+ * This works only for the non-NUMA case.  Later, we'll need a lookup
+ * to convert from real physical addresses to nid, that doesn't use
+ * pfn_to_nid().
+ */
+int __devinit add_memory(u64 start, u64 size)
+{
+	struct pglist_data *pgdata = NODE_DATA(0);
+	struct zone *zone;
+	unsigned long start_pfn = start >> PAGE_SHIFT;
+	unsigned long nr_pages = size >> PAGE_SHIFT;
+
+	/* this should work for most non-highmem platforms */
+	zone = pgdata->node_zones;
+
+	return __add_pages(zone, start_pfn, nr_pages);
+
+	return 0;
+}
+
+/*
+ * First pass at this code will check to determine if the remove
+ * request is within the RMO.  Do not allow removal within the RMO.
+ */
+int __devinit remove_memory(u64 start, u64 size)
+{
+	struct zone *zone;
+	unsigned long start_pfn, end_pfn, nr_pages;
+
+	start_pfn = start >> PAGE_SHIFT;
+	nr_pages = size >> PAGE_SHIFT;
+	end_pfn = start_pfn + nr_pages;
+
+	printk("%s(): Attempting to remove memoy in range "
+			"%lx to %lx\n", __func__, start, start+size);
+	/*
+	 * check for range within RMO
+	 */
+	zone = page_zone(pfn_to_page(start_pfn));
+
+	printk("%s(): memory will be removed from "
+			"the %s zone\n", __func__, zone->name);
+
+	/*
+	 * not handling removing memory ranges that
+	 * overlap multiple zones yet
+	 */
+	if (end_pfn > (zone->zone_start_pfn + zone->spanned_pages))
+		goto overlap;
+
+	/* make sure it is NOT in RMO */
+	if ((start < lmb.rmo_size) || ((start+size) < lmb.rmo_size)) {
+		printk("%s(): range to be removed must NOT be in RMO!\n",
+			__func__);
+		goto in_rmo;
+	}
+
+	return __remove_pages(zone, start_pfn, nr_pages);
+
+overlap:
+	printk("%s(): memory range to be removed overlaps "
+		"multiple zones!!!\n", __func__);
+in_rmo:
+	return -1;
+}
+#endif /* CONFIG_MEMORY_HOTPLUG */
+
 void show_mem(void)
 {
 	unsigned long total = 0, reserved = 0;
@@ -115,6 +192,8 @@ void show_mem(void)
 	show_free_areas();
 	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 	for_each_pgdat(pgdat) {
+		unsigned long flags;
+		pgdat_resize_lock(pgdat, &flags);
 		for (i = 0; i < pgdat->node_spanned_pages; i++) {
 			page = pgdat_page_nr(pgdat, i);
 			total++;
@@ -127,6 +206,7 @@ void show_mem(void)
 			else if (page_count(page))
 				shared += page_count(page) - 1;
 		}
+		pgdat_resize_unlock(pgdat, &flags);
 	}
 	printk("%ld pages of RAM\n", total);
 #ifdef CONFIG_HIGHMEM
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 484d24f9208b..b79a78206135 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -104,7 +104,6 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags)
 	unsigned long vsid;
 
 	if (mem_init_done) {
-		spin_lock(&init_mm.page_table_lock);
 		pgdp = pgd_offset_k(ea);
 		pudp = pud_alloc(&init_mm, pgdp, ea);
 		if (!pudp)
@@ -112,12 +111,11 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags)
 		pmdp = pmd_alloc(&init_mm, pudp, ea);
 		if (!pmdp)
 			return -ENOMEM;
-		ptep = pte_alloc_kernel(&init_mm, pmdp, ea);
+		ptep = pte_alloc_kernel(pmdp, ea);
 		if (!ptep)
 			return -ENOMEM;
 		set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT,
 							  __pgprot(flags)));
-		spin_unlock(&init_mm.page_table_lock);
 	} else {
 		unsigned long va, vpn, hash, hpteg;
 
diff --git a/arch/ppc/8xx_io/cs4218.h b/arch/ppc/8xx_io/cs4218.h
index a3c38c5a5db2..f1c7392255f8 100644
--- a/arch/ppc/8xx_io/cs4218.h
+++ b/arch/ppc/8xx_io/cs4218.h
@@ -78,7 +78,7 @@ typedef struct {
     const char *name2;
     void (*open)(void);
     void (*release)(void);
-    void *(*dma_alloc)(unsigned int, int);
+    void *(*dma_alloc)(unsigned int, gfp_t);
     void (*dma_free)(void *, unsigned int);
     int (*irqinit)(void);
 #ifdef MODULE
diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c
index 2ca9ec7ec3a7..532caa388dc2 100644
--- a/arch/ppc/8xx_io/cs4218_tdm.c
+++ b/arch/ppc/8xx_io/cs4218_tdm.c
@@ -318,7 +318,7 @@ struct cs_sound_settings {
 
 static struct cs_sound_settings sound;
 
-static void *CS_Alloc(unsigned int size, int flags);
+static void *CS_Alloc(unsigned int size, gfp_t flags);
 static void CS_Free(void *ptr, unsigned int size);
 static int CS_IrqInit(void);
 #ifdef MODULE
@@ -959,7 +959,7 @@ static TRANS transCSNormalRead = {
 
 /*** Low level stuff *********************************************************/
 
-static void *CS_Alloc(unsigned int size, int flags)
+static void *CS_Alloc(unsigned int size, gfp_t flags)
 {
 	int	order;
 
diff --git a/arch/ppc/kernel/dma-mapping.c b/arch/ppc/kernel/dma-mapping.c
index 8edee806dae7..685fd0defe23 100644
--- a/arch/ppc/kernel/dma-mapping.c
+++ b/arch/ppc/kernel/dma-mapping.c
@@ -115,7 +115,7 @@ static struct vm_region consistent_head = {
 };
 
 static struct vm_region *
-vm_region_alloc(struct vm_region *head, size_t size, int gfp)
+vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp)
 {
 	unsigned long addr = head->vm_start, end = head->vm_end - size;
 	unsigned long flags;
@@ -173,7 +173,7 @@ static struct vm_region *vm_region_find(struct vm_region *head, unsigned long ad
  * virtual and bus address for that space.
  */
 void *
-__dma_alloc_coherent(size_t size, dma_addr_t *handle, int gfp)
+__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp)
 {
 	struct page *page;
 	struct vm_region *c;
@@ -335,8 +335,6 @@ static int __init dma_alloc_init(void)
 	pte_t *pte;
 	int ret = 0;
 
-	spin_lock(&init_mm.page_table_lock);
-
 	do {
 		pgd = pgd_offset(&init_mm, CONSISTENT_BASE);
 		pmd = pmd_alloc(&init_mm, pgd, CONSISTENT_BASE);
@@ -347,7 +345,7 @@ static int __init dma_alloc_init(void)
 		}
 		WARN_ON(!pmd_none(*pmd));
 
-		pte = pte_alloc_kernel(&init_mm, pmd, CONSISTENT_BASE);
+		pte = pte_alloc_kernel(pmd, CONSISTENT_BASE);
 		if (!pte) {
 			printk(KERN_ERR "%s: no pte tables\n", __func__);
 			ret = -ENOMEM;
@@ -357,8 +355,6 @@ static int __init dma_alloc_init(void)
 		consistent_pte = pte;
 	} while (0);
 
-	spin_unlock(&init_mm.page_table_lock);
-
 	return ret;
 }
 
diff --git a/arch/ppc/kernel/time.c b/arch/ppc/kernel/time.c
index 76f44ce4772e..53ea723af60a 100644
--- a/arch/ppc/kernel/time.c
+++ b/arch/ppc/kernel/time.c
@@ -66,11 +66,6 @@
 
 #include <asm/time.h>
 
-/* XXX false sharing with below? */
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 unsigned long disarm_decr[NR_CPUS];
 
 extern struct timezone sys_tz;
diff --git a/arch/ppc/mm/4xx_mmu.c b/arch/ppc/mm/4xx_mmu.c
index b7bcbc232f39..4d006aa1a0d1 100644
--- a/arch/ppc/mm/4xx_mmu.c
+++ b/arch/ppc/mm/4xx_mmu.c
@@ -110,13 +110,11 @@ unsigned long __init mmu_mapin_ram(void)
 		pmd_t *pmdp;
 		unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
 
-		spin_lock(&init_mm.page_table_lock);
 		pmdp = pmd_offset(pgd_offset_k(v), v);
 		pmd_val(*pmdp++) = val;
 		pmd_val(*pmdp++) = val;
 		pmd_val(*pmdp++) = val;
 		pmd_val(*pmdp++) = val;
-		spin_unlock(&init_mm.page_table_lock);
 
 		v += LARGE_PAGE_SIZE_16M;
 		p += LARGE_PAGE_SIZE_16M;
@@ -127,10 +125,8 @@ unsigned long __init mmu_mapin_ram(void)
 		pmd_t *pmdp;
 		unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
 
-		spin_lock(&init_mm.page_table_lock);
 		pmdp = pmd_offset(pgd_offset_k(v), v);
 		pmd_val(*pmdp) = val;
-		spin_unlock(&init_mm.page_table_lock);
 
 		v += LARGE_PAGE_SIZE_4M;
 		p += LARGE_PAGE_SIZE_4M;
diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c
index 81a3d7446d37..6ea9185fd120 100644
--- a/arch/ppc/mm/pgtable.c
+++ b/arch/ppc/mm/pgtable.c
@@ -114,9 +114,9 @@ struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
 	struct page *ptepage;
 
 #ifdef CONFIG_HIGHPTE
-	int flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
+	gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
 #else
-	int flags = GFP_KERNEL | __GFP_REPEAT;
+	gfp_t flags = GFP_KERNEL | __GFP_REPEAT;
 #endif
 
 	ptepage = alloc_pages(flags, 0);
@@ -280,18 +280,16 @@ map_page(unsigned long va, phys_addr_t pa, int flags)
 	pte_t *pg;
 	int err = -ENOMEM;
 
-	spin_lock(&init_mm.page_table_lock);
 	/* Use upper 10 bits of VA to index the first level map */
 	pd = pmd_offset(pgd_offset_k(va), va);
 	/* Use middle 10 bits of VA to index the second-level map */
-	pg = pte_alloc_kernel(&init_mm, pd, va);
+	pg = pte_alloc_kernel(pd, va);
 	if (pg != 0) {
 		err = 0;
 		set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags)));
 		if (mem_init_done)
 			flush_HPTE(0, va, pmd_val(*pd));
 	}
-	spin_unlock(&init_mm.page_table_lock);
 	return err;
 }
 
diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c
index 2cc12b04584a..b6a66d5e9d83 100644
--- a/arch/ppc/platforms/hdpu.c
+++ b/arch/ppc/platforms/hdpu.c
@@ -609,11 +609,6 @@ static void parse_bootinfo(unsigned long r3,
 }
 
 #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-static int hdpu_ide_check_region(ide_ioreg_t from, unsigned int extent)
-{
-	return check_region(from, extent);
-}
-
 static void
 hdpu_ide_request_region(ide_ioreg_t from, unsigned int extent, const char *name)
 {
diff --git a/arch/ppc64/kernel/hvcserver.c b/arch/ppc64/kernel/hvcserver.c
index bde8f42da854..4d584172055a 100644
--- a/arch/ppc64/kernel/hvcserver.c
+++ b/arch/ppc64/kernel/hvcserver.c
@@ -22,6 +22,8 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/slab.h>
+
 #include <asm/hvcall.h>
 #include <asm/hvcserver.h>
 #include <asm/io.h>
diff --git a/arch/ppc64/kernel/ioctl32.c b/arch/ppc64/kernel/ioctl32.c
index a8005db23ec5..ba4a899045c2 100644
--- a/arch/ppc64/kernel/ioctl32.c
+++ b/arch/ppc64/kernel/ioctl32.c
@@ -39,9 +39,7 @@ IOCTL_TABLE_START
 #include <linux/compat_ioctl.h>
 #define DECLARES
 #include "compat_ioctl.c"
-COMPATIBLE_IOCTL(TIOCSTART)
-COMPATIBLE_IOCTL(TIOCSTOP)
-COMPATIBLE_IOCTL(TIOCSLTC)
+
 /* Little p (/dev/rtc, /dev/envctrl, etc.) */
 COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */
 COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */
diff --git a/arch/ppc64/kernel/vdso.c b/arch/ppc64/kernel/vdso.c
index efa985f05aca..4aacf521e3e4 100644
--- a/arch/ppc64/kernel/vdso.c
+++ b/arch/ppc64/kernel/vdso.c
@@ -176,13 +176,13 @@ static struct page * vdso_vma_nopage(struct vm_area_struct * vma,
 		return NOPAGE_SIGBUS;
 
 	/*
-	 * Last page is systemcfg, special handling here, no get_page() a
-	 * this is a reserved page
+	 * Last page is systemcfg.
 	 */
 	if ((vma->vm_end - address) <= PAGE_SIZE)
-		return virt_to_page(systemcfg);
+		pg = virt_to_page(systemcfg);
+	else
+		pg = virt_to_page(vbase + offset);
 
-	pg = virt_to_page(vbase + offset);
 	get_page(pg);
 	DBG(" ->page count: %d\n", page_count(pg));
 
@@ -259,7 +259,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack)
 	 * gettimeofday will be totally dead. It's fine to use that for setting
 	 * breakpoints in the vDSO code pages though
 	 */
-	vma->vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC;
+	vma->vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC | VM_RESERVED;
 	vma->vm_flags |= mm->def_flags;
 	vma->vm_page_prot = protection_map[vma->vm_flags & 0x7];
 	vma->vm_ops = &vdso_vmops;
@@ -603,6 +603,8 @@ void __init vdso_init(void)
 		ClearPageReserved(pg);
 		get_page(pg);
 	}
+
+	get_page(virt_to_page(systemcfg));
 }
 
 int in_gate_area_no_task(unsigned long addr)
diff --git a/arch/s390/kernel/compat_ioctl.c b/arch/s390/kernel/compat_ioctl.c
index 24a1e9f069a7..6504c4e69986 100644
--- a/arch/s390/kernel/compat_ioctl.c
+++ b/arch/s390/kernel/compat_ioctl.c
@@ -18,6 +18,8 @@
 #include <asm/dasd.h>
 #include <asm/cmb.h>
 #include <asm/tape390.h>
+#include <asm/ccwdev.h>
+#include "../../../drivers/s390/char/raw3270.h"
 
 static int do_ioctl32_pointer(unsigned int fd, unsigned int cmd,
 				unsigned long arg, struct file *f)
@@ -62,6 +64,13 @@ COMPATIBLE_IOCTL(BIODASDCMFENABLE)
 COMPATIBLE_IOCTL(BIODASDCMFDISABLE)
 COMPATIBLE_IOCTL(BIODASDREADALLCMB)
 
+COMPATIBLE_IOCTL(TUBICMD)
+COMPATIBLE_IOCTL(TUBOCMD)
+COMPATIBLE_IOCTL(TUBGETI)
+COMPATIBLE_IOCTL(TUBGETO)
+COMPATIBLE_IOCTL(TUBSETMOD)
+COMPATIBLE_IOCTL(TUBGETMOD)
+
 COMPATIBLE_IOCTL(TAPE390_DISPLAY)
 
 /* s390 doesn't need handlers here */
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 55654b6e16dc..039354d72348 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -485,7 +485,9 @@ start:
 #
         .org  0x10000
 startup:basr  %r13,0                     # get base
-.LPG1:  lctl  %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
+.LPG1:	l     %r1, .Lget_ipl_device_addr-.LPG1(%r13)
+	basr  %r14, %r1
+	lctl  %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
 	la    %r12,_pstart-.LPG1(%r13)   # pointer to parameter area
 					 # move IPL device to lowcore
         mvc   __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12)
@@ -560,6 +562,9 @@ startup:basr  %r13,0                     # get base
 	mr    %r2,%r1			# mem size in bytes in %r3
 	b     .Lfchunk-.LPG1(%r13)
 
+	.align 4
+.Lget_ipl_device_addr:
+	.long .Lget_ipl_device
 .Lpmask:
 	.byte 0
 .align 8
@@ -755,6 +760,63 @@ _pstart:
 	.global _pend
 _pend:	
 
+.Lget_ipl_device:
+	basr  %r12,0
+.LPG2:	l     %r1,0xb8			# get sid
+	sll   %r1,15			# test if subchannel is enabled
+	srl   %r1,31
+	ltr   %r1,%r1
+	bz    0(%r14)			# subchannel disabled
+	l     %r1,0xb8
+	la    %r5,.Lipl_schib-.LPG2(%r12)
+	stsch 0(%r5)		        # get schib of subchannel
+	bnz   0(%r14)			# schib not available
+	tm    5(%r5),0x01		# devno valid?
+	bno   0(%r14)
+	la    %r6,ipl_parameter_flags-.LPG2(%r12)
+	oi    3(%r6),0x01		# set flag
+	la    %r2,ipl_devno-.LPG2(%r12)
+	mvc   0(2,%r2),6(%r5)		# store devno
+	tm    4(%r5),0x80		# qdio capable device?
+	bno   0(%r14)
+	oi    3(%r6),0x02		# set flag
+
+	# copy ipl parameters
+
+	lhi   %r0,4096
+	l     %r2,20(%r0)		# get address of parameter list
+	lhi   %r3,IPL_PARMBLOCK_ORIGIN
+	st    %r3,20(%r0)
+	lhi   %r4,1
+	cr    %r2,%r3			# start parameters < destination ?
+	jl    0f
+	lhi   %r1,1			# copy direction is upwards
+	j     1f
+0:	lhi   %r1,-1			# copy direction is downwards
+	ar    %r2,%r0
+	ar    %r3,%r0
+	ar    %r2,%r1
+	ar    %r3,%r1
+1:	mvc   0(1,%r3),0(%r2)		# finally copy ipl parameters
+	ar    %r3,%r1
+	ar    %r2,%r1
+	sr    %r0,%r4
+	jne   1b
+	b     0(%r14)
+
+	.align 4
+.Lipl_schib:
+	.rept 13
+	.long 0
+	.endr
+
+	.globl ipl_parameter_flags
+ipl_parameter_flags:
+	.long 0
+	.globl ipl_devno
+ipl_devno:
+	.word 0
+
 #ifdef CONFIG_SHARED_KERNEL
 	.org   0x100000
 #endif
@@ -764,11 +826,11 @@ _pend:
 #
         .globl _stext
 _stext:	basr  %r13,0                    # get base
-.LPG2:
+.LPG3:
 #
 # Setup stack
 #
-        l     %r15,.Linittu-.LPG2(%r13)
+        l     %r15,.Linittu-.LPG3(%r13)
 	mvc   __LC_CURRENT(4),__TI_task(%r15)
         ahi   %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE
         st    %r15,__LC_KERNEL_STACK    # set end of kernel stack
@@ -782,8 +844,8 @@ _stext:	basr  %r13,0                    # get base
         lctl   %c0,%c15,0(%r15)
 
 #
-        lam    0,15,.Laregs-.LPG2(%r13) # load access regs needed by uaccess
-        l      %r14,.Lstart-.LPG2(%r13)
+        lam    0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess
+        l      %r14,.Lstart-.LPG3(%r13)
         basr   %r14,%r14                # call start_kernel
 #
 # We returned from start_kernel ?!? PANIK
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index c9ff0404c875..193aafa72f54 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -484,6 +484,8 @@ start:
 startup:basr  %r13,0                     # get base
 .LPG1:  sll   %r13,1                     # remove high order bit
         srl   %r13,1
+	l     %r1,.Lget_ipl_device_addr-.LPG1(%r13)
+	basr  %r14,%r1
         lhi   %r1,1                      # mode 1 = esame
         slr   %r0,%r0                    # set cpuid to zero
         sigp  %r1,%r0,0x12               # switch to esame mode
@@ -556,6 +558,9 @@ startup:basr  %r13,0                     # get base
 	mlgr  %r2,%r1			# mem size in bytes in %r3
 	b     .Lfchunk-.LPG1(%r13)
 
+	.align 4
+.Lget_ipl_device_addr:
+	.long .Lget_ipl_device
 .Lpmask:
 	.byte 0
 	.align 8
@@ -746,6 +751,63 @@ _pstart:
 	.global _pend
 _pend:	
 
+.Lget_ipl_device:
+	basr  %r12,0
+.LPG2:	l     %r1,0xb8			# get sid
+	sll   %r1,15			# test if subchannel is enabled
+	srl   %r1,31
+	ltr   %r1,%r1
+	bz    0(%r14)			# subchannel disabled
+	l     %r1,0xb8
+	la    %r5,.Lipl_schib-.LPG2(%r12)
+	stsch 0(%r5)		        # get schib of subchannel
+	bnz   0(%r14)			# schib not available
+	tm    5(%r5),0x01		# devno valid?
+	bno   0(%r14)
+	la    %r6,ipl_parameter_flags-.LPG2(%r12)
+	oi    3(%r6),0x01		# set flag
+	la    %r2,ipl_devno-.LPG2(%r12)
+	mvc   0(2,%r2),6(%r5)		# store devno
+	tm    4(%r5),0x80		# qdio capable device?
+	bno   0(%r14)
+	oi    3(%r6),0x02		# set flag
+
+	# copy ipl parameters
+
+	lhi   %r0,4096
+	l     %r2,20(%r0)		# get address of parameter list
+	lhi   %r3,IPL_PARMBLOCK_ORIGIN
+	st    %r3,20(%r0)
+	lhi   %r4,1
+	cr    %r2,%r3			# start parameters < destination ?
+	jl    0f
+	lhi   %r1,1			# copy direction is upwards
+	j     1f
+0:	lhi   %r1,-1			# copy direction is downwards
+	ar    %r2,%r0
+	ar    %r3,%r0
+	ar    %r2,%r1
+	ar    %r3,%r1
+1:	mvc   0(1,%r3),0(%r2)		# finally copy ipl parameters
+	ar    %r3,%r1
+	ar    %r2,%r1
+	sr    %r0,%r4
+	jne   1b
+	b     0(%r14)
+
+	.align 4
+.Lipl_schib:
+	.rept 13
+	.long 0
+	.endr
+
+	.globl ipl_parameter_flags
+ipl_parameter_flags:
+	.long 0
+	.globl ipl_devno
+ipl_devno:
+	.word 0
+
 #ifdef CONFIG_SHARED_KERNEL
 	.org   0x100000
 #endif
@@ -755,7 +817,7 @@ _pend:
 #
         .globl _stext
 _stext:	basr  %r13,0                    # get base
-.LPG2:
+.LPG3:
 #
 # Setup stack
 #
@@ -774,7 +836,7 @@ _stext:	basr  %r13,0                    # get base
         lctlg  %c0,%c15,0(%r15)
 
 #
-        lam    0,15,.Laregs-.LPG2(%r13) # load access regs needed by uaccess
+        lam    0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess
         brasl  %r14,start_kernel        # go to C code
 #
 # We returned from start_kernel ?!? PANIK
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 5204778b8e5e..31e7b19348b7 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -36,6 +36,7 @@
 #include <linux/console.h>
 #include <linux/seq_file.h>
 #include <linux/kernel_stat.h>
+#include <linux/device.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -685,3 +686,188 @@ struct seq_operations cpuinfo_op = {
 	.show	= show_cpuinfo,
 };
 
+#define DEFINE_IPL_ATTR(_name, _format, _value)			\
+static ssize_t ipl_##_name##_show(struct subsystem *subsys,	\
+		char *page)					\
+{								\
+	return sprintf(page, _format, _value);			\
+}								\
+static struct subsys_attribute ipl_##_name##_attr =		\
+	__ATTR(_name, S_IRUGO, ipl_##_name##_show, NULL);
+
+DEFINE_IPL_ATTR(wwpn, "0x%016llx\n", (unsigned long long)
+		IPL_PARMBLOCK_START->fcp.wwpn);
+DEFINE_IPL_ATTR(lun, "0x%016llx\n", (unsigned long long)
+		IPL_PARMBLOCK_START->fcp.lun);
+DEFINE_IPL_ATTR(bootprog, "%lld\n", (unsigned long long)
+		IPL_PARMBLOCK_START->fcp.bootprog);
+DEFINE_IPL_ATTR(br_lba, "%lld\n", (unsigned long long)
+		IPL_PARMBLOCK_START->fcp.br_lba);
+
+enum ipl_type_type {
+	ipl_type_unknown,
+	ipl_type_ccw,
+	ipl_type_fcp,
+};
+
+static enum ipl_type_type
+get_ipl_type(void)
+{
+	struct ipl_parameter_block *ipl = IPL_PARMBLOCK_START;
+
+	if (!IPL_DEVNO_VALID)
+		return ipl_type_unknown;
+	if (!IPL_PARMBLOCK_VALID)
+		return ipl_type_ccw;
+	if (ipl->hdr.header.version > IPL_MAX_SUPPORTED_VERSION)
+		return ipl_type_unknown;
+	if (ipl->fcp.pbt != IPL_TYPE_FCP)
+		return ipl_type_unknown;
+	return ipl_type_fcp;
+}
+
+static ssize_t
+ipl_type_show(struct subsystem *subsys, char *page)
+{
+	switch (get_ipl_type()) {
+	case ipl_type_ccw:
+		return sprintf(page, "ccw\n");
+	case ipl_type_fcp:
+		return sprintf(page, "fcp\n");
+	default:
+		return sprintf(page, "unknown\n");
+	}
+}
+
+static struct subsys_attribute ipl_type_attr = __ATTR_RO(ipl_type);
+
+static ssize_t
+ipl_device_show(struct subsystem *subsys, char *page)
+{
+	struct ipl_parameter_block *ipl = IPL_PARMBLOCK_START;
+
+	switch (get_ipl_type()) {
+	case ipl_type_ccw:
+		return sprintf(page, "0.0.%04x\n", ipl_devno);
+	case ipl_type_fcp:
+		return sprintf(page, "0.0.%04x\n", ipl->fcp.devno);
+	default:
+		return 0;
+	}
+}
+
+static struct subsys_attribute ipl_device_attr =
+	__ATTR(device, S_IRUGO, ipl_device_show, NULL);
+
+static struct attribute *ipl_fcp_attrs[] = {
+	&ipl_type_attr.attr,
+	&ipl_device_attr.attr,
+	&ipl_wwpn_attr.attr,
+	&ipl_lun_attr.attr,
+	&ipl_bootprog_attr.attr,
+	&ipl_br_lba_attr.attr,
+	NULL,
+};
+
+static struct attribute_group ipl_fcp_attr_group = {
+	.attrs = ipl_fcp_attrs,
+};
+
+static struct attribute *ipl_ccw_attrs[] = {
+	&ipl_type_attr.attr,
+	&ipl_device_attr.attr,
+	NULL,
+};
+
+static struct attribute_group ipl_ccw_attr_group = {
+	.attrs = ipl_ccw_attrs,
+};
+
+static struct attribute *ipl_unknown_attrs[] = {
+	&ipl_type_attr.attr,
+	NULL,
+};
+
+static struct attribute_group ipl_unknown_attr_group = {
+	.attrs = ipl_unknown_attrs,
+};
+
+static ssize_t
+ipl_parameter_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+{
+	unsigned int size = IPL_PARMBLOCK_SIZE;
+
+	if (off > size)
+		return 0;
+	if (off + count > size)
+		count = size - off;
+
+	memcpy(buf, (void *) IPL_PARMBLOCK_START + off, count);
+	return count;
+}
+
+static struct bin_attribute ipl_parameter_attr = {
+	.attr = {
+		.name = "binary_parameter",
+		.mode = S_IRUGO,
+		.owner = THIS_MODULE,
+	},
+	.size = PAGE_SIZE,
+	.read = &ipl_parameter_read,
+};
+
+static ssize_t
+ipl_scp_data_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+{
+	unsigned int size =  IPL_PARMBLOCK_START->fcp.scp_data_len;
+	void *scp_data = &IPL_PARMBLOCK_START->fcp.scp_data;
+
+	if (off > size)
+		return 0;
+	if (off + count > size)
+		count = size - off;
+
+	memcpy(buf, scp_data + off, count);
+	return count;
+}
+
+static struct bin_attribute ipl_scp_data_attr = {
+	.attr = {
+		.name = "scp_data",
+		.mode = S_IRUGO,
+		.owner = THIS_MODULE,
+	},
+	.size = PAGE_SIZE,
+	.read = &ipl_scp_data_read,
+};
+
+static decl_subsys(ipl, NULL, NULL);
+
+static int __init
+ipl_device_sysfs_register(void) {
+	int rc;
+
+	rc = firmware_register(&ipl_subsys);
+	if (rc)
+		return rc;
+
+	switch (get_ipl_type()) {
+	case ipl_type_ccw:
+		sysfs_create_group(&ipl_subsys.kset.kobj, &ipl_ccw_attr_group);
+		break;
+	case ipl_type_fcp:
+		sysfs_create_group(&ipl_subsys.kset.kobj, &ipl_fcp_attr_group);
+		sysfs_create_bin_file(&ipl_subsys.kset.kobj,
+				      &ipl_parameter_attr);
+		sysfs_create_bin_file(&ipl_subsys.kset.kobj,
+				      &ipl_scp_data_attr);
+		break;
+	default:
+		sysfs_create_group(&ipl_subsys.kset.kobj,
+				   &ipl_unknown_attr_group);
+		break;
+	}
+	return 0;
+}
+
+__initcall(ipl_device_sysfs_register);
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 2fd75da15495..9a1d95894f3d 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -49,10 +49,6 @@
 
 #define TICK_SIZE tick
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 static ext_int_info_t ext_int_info_cc;
 static u64 init_timer_cc;
 static u64 jiffies_timer_cc;
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index fa0726507b3d..22a895ecb7a4 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -24,7 +24,6 @@
 #include <asm/s390_ext.h>
 #include <asm/timer.h>
 
-#define VTIMER_MAGIC (TIMER_MAGIC + 1)
 static ext_int_info_t ext_int_info_timer;
 DEFINE_PER_CPU(struct vtimer_queue, virt_cpu_timer);
 
@@ -277,20 +276,12 @@ static void do_cpu_timer_interrupt(struct pt_regs *regs, __u16 error_code)
 
 void init_virt_timer(struct vtimer_list *timer)
 {
-	timer->magic = VTIMER_MAGIC;
 	timer->function = NULL;
 	INIT_LIST_HEAD(&timer->entry);
 	spin_lock_init(&timer->lock);
 }
 EXPORT_SYMBOL(init_virt_timer);
 
-static inline int check_vtimer(struct vtimer_list *timer)
-{
-	if (timer->magic != VTIMER_MAGIC)
-		return -EINVAL;
-	return 0;
-}
-
 static inline int vtimer_pending(struct vtimer_list *timer)
 {
 	return (!list_empty(&timer->entry));
@@ -346,7 +337,7 @@ static void internal_add_vtimer(struct vtimer_list *timer)
 
 static inline int prepare_vtimer(struct vtimer_list *timer)
 {
-	if (check_vtimer(timer) || !timer->function) {
+	if (!timer->function) {
 		printk("add_virt_timer: uninitialized timer\n");
 		return -EINVAL;
 	}
@@ -414,7 +405,7 @@ int mod_virt_timer(struct vtimer_list *timer, __u64 expires)
 	unsigned long flags;
 	int cpu;
 
-	if (check_vtimer(timer) || !timer->function) {
+	if (!timer->function) {
 		printk("mod_virt_timer: uninitialized timer\n");
 		return	-EINVAL;
 	}
@@ -481,11 +472,6 @@ int del_virt_timer(struct vtimer_list *timer)
 	unsigned long flags;
 	struct vtimer_queue *vt_list;
 
-	if (check_vtimer(timer)) {
-		printk("del_virt_timer: timer not initialized\n");
-		return -EINVAL;
-	}
-
 	/* check if timer is pending */
 	if (!vtimer_pending(timer))
 		return 0;
diff --git a/arch/s390/mm/ioremap.c b/arch/s390/mm/ioremap.c
index c6c39d868bc8..0f6e9ecbefe2 100644
--- a/arch/s390/mm/ioremap.c
+++ b/arch/s390/mm/ioremap.c
@@ -58,7 +58,7 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned lo
 	if (address >= end)
 		BUG();
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -80,7 +80,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 	flush_cache_all();
 	if (address >= end)
 		BUG();
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		pmd_t *pmd;
 		pmd = pmd_alloc(&init_mm, dir, address);
@@ -94,7 +93,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	} while (address && (address < end));
-	spin_unlock(&init_mm.page_table_lock);
 	flush_tlb_all();
 	return 0;
 }
diff --git a/arch/sh/boards/renesas/rts7751r2d/mach.c b/arch/sh/boards/renesas/rts7751r2d/mach.c
index 1efc18e786d5..610740512d56 100644
--- a/arch/sh/boards/renesas/rts7751r2d/mach.c
+++ b/arch/sh/boards/renesas/rts7751r2d/mach.c
@@ -23,7 +23,7 @@ extern void init_rts7751r2d_IRQ(void);
 extern void *rts7751r2d_ioremap(unsigned long, unsigned long);
 extern int rts7751r2d_irq_demux(int irq);
 
-extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, int);
+extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t);
 extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t);
 
 /*
diff --git a/arch/sh/cchips/voyagergx/consistent.c b/arch/sh/cchips/voyagergx/consistent.c
index 5b92585a38d2..3d9a02c093a3 100644
--- a/arch/sh/cchips/voyagergx/consistent.c
+++ b/arch/sh/cchips/voyagergx/consistent.c
@@ -31,7 +31,7 @@ static LIST_HEAD(voya_alloc_list);
 #define OHCI_SRAM_SIZE	0x10000
 
 void *voyagergx_consistent_alloc(struct device *dev, size_t size,
-				 dma_addr_t *handle, int flag)
+				 dma_addr_t *handle, gfp_t flag)
 {
 	struct list_head *list = &voya_alloc_list;
 	struct voya_alloc_entry *entry;
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
index 71a6d4e7809f..6e3b58bd8795 100644
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ b/arch/sh/drivers/dma/dma-sysfs.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/sysdev.h>
 #include <linux/module.h>
+#include <linux/string.h>
 #include <asm/dma.h>
 
 static struct sysdev_class dma_sysclass = {
diff --git a/arch/sh/drivers/pci/dma-dreamcast.c b/arch/sh/drivers/pci/dma-dreamcast.c
index 83de7ef4e7df..e12418bb1fa5 100644
--- a/arch/sh/drivers/pci/dma-dreamcast.c
+++ b/arch/sh/drivers/pci/dma-dreamcast.c
@@ -33,7 +33,7 @@
 static int gapspci_dma_used = 0;
 
 void *dreamcast_consistent_alloc(struct device *dev, size_t size,
-				 dma_addr_t *dma_handle, int flag)
+				 dma_addr_t *dma_handle, gfp_t flag)
 {
 	unsigned long buf;
 
diff --git a/arch/sh/kernel/cpufreq.c b/arch/sh/kernel/cpufreq.c
index e0b384bef55f..47abf6e49dfb 100644
--- a/arch/sh/kernel/cpufreq.c
+++ b/arch/sh/kernel/cpufreq.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/cpumask.h>
 #include <linux/smp.h>
+#include <linux/sched.h>	/* set_cpus_allowed() */
 
 #include <asm/processor.h>
 #include <asm/watchdog.h>
diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c
index b28919b65682..1fbe5a428e31 100644
--- a/arch/sh/kernel/ptrace.c
+++ b/arch/sh/kernel/ptrace.c
@@ -80,7 +80,7 @@ void ptrace_disable(struct task_struct *child)
 	/* nothing to do.. */
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
 {
 	struct task_struct *child;
 	struct user * dummy = NULL;
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index 02ca69918d7c..671b876416bf 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -56,10 +56,6 @@ extern unsigned long wall_jiffies;
 #define TICK_SIZE (tick_nsec / 1000)
 DEFINE_SPINLOCK(tmu0_lock);
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 /* XXX: Can we initialize this in a routine somewhere?  Dreamcast doesn't want
  * these routines anywhere... */
 #ifdef CONFIG_SH_RTC
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index 1f7af0c73cf4..df3a9e452cc5 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -11,7 +11,7 @@
 #include <linux/dma-mapping.h>
 #include <asm/io.h>
 
-void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle)
+void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle)
 {
 	struct page *page, *end, *free;
 	void *ret;
diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c
index 7abba2161da6..775f86cd3fe8 100644
--- a/arch/sh/mm/fault.c
+++ b/arch/sh/mm/fault.c
@@ -194,10 +194,13 @@ asmlinkage int __do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
 			       unsigned long address)
 {
 	unsigned long addrmax = P4SEG;
-	pgd_t *dir;
+	pgd_t *pgd;
 	pmd_t *pmd;
 	pte_t *pte;
 	pte_t entry;
+	struct mm_struct *mm;
+	spinlock_t *ptl;
+	int ret = 1;
 
 #ifdef CONFIG_SH_KGDB
 	if (kgdb_nofault && kgdb_bus_err_hook)
@@ -208,28 +211,28 @@ asmlinkage int __do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
 	addrmax = P4SEG_STORE_QUE + 0x04000000;
 #endif
 
-	if (address >= P3SEG && address < addrmax)
-		dir = pgd_offset_k(address);
-	else if (address >= TASK_SIZE)
+	if (address >= P3SEG && address < addrmax) {
+		pgd = pgd_offset_k(address);
+		mm = NULL;
+	} else if (address >= TASK_SIZE)
 		return 1;
-	else if (!current->mm)
+	else if (!(mm = current->mm))
 		return 1;
 	else
-		dir = pgd_offset(current->mm, address);
+		pgd = pgd_offset(mm, address);
 
-	pmd = pmd_offset(dir, address);
-	if (pmd_none(*pmd))
-		return 1;
-	if (pmd_bad(*pmd)) {
-		pmd_ERROR(*pmd);
-		pmd_clear(pmd);
+	pmd = pmd_offset(pgd, address);
+	if (pmd_none_or_clear_bad(pmd))
 		return 1;
-	}
-	pte = pte_offset_kernel(pmd, address);
+	if (mm)
+		pte = pte_offset_map_lock(mm, pmd, address, &ptl);
+	else
+		pte = pte_offset_kernel(pmd, address);
+
 	entry = *pte;
 	if (pte_none(entry) || pte_not_present(entry)
 	    || (writeaccess && !pte_write(entry)))
-		return 1;
+		goto unlock;
 
 	if (writeaccess)
 		entry = pte_mkdirty(entry);
@@ -251,8 +254,11 @@ asmlinkage int __do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
 
 	set_pte(pte, entry);
 	update_mmu_cache(NULL, address, entry);
-
-	return 0;
+	ret = 0;
+unlock:
+	if (mm)
+		pte_unmap_unlock(pte, ptl);
+	return ret;
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c
index 95bb1a6c6060..6b7a7688c98e 100644
--- a/arch/sh/mm/hugetlbpage.c
+++ b/arch/sh/mm/hugetlbpage.c
@@ -54,8 +54,6 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 	return pte;
 }
 
-#define mk_pte_huge(entry) do { pte_val(entry) |= _PAGE_SZHUGE; } while (0)
-
 void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 		     pte_t *ptep, pte_t entry)
 {
diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c
index 9f490c2742f0..e794e27a72f1 100644
--- a/arch/sh/mm/ioremap.c
+++ b/arch/sh/mm/ioremap.c
@@ -57,7 +57,7 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address,
 	if (address >= end)
 		BUG();
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -79,7 +79,6 @@ int remap_area_pages(unsigned long address, unsigned long phys_addr,
 	flush_cache_all();
 	if (address >= end)
 		BUG();
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		pmd_t *pmd;
 		pmd = pmd_alloc(&init_mm, dir, address);
@@ -93,7 +92,6 @@ int remap_area_pages(unsigned long address, unsigned long phys_addr,
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	} while (address && (address < end));
-	spin_unlock(&init_mm.page_table_lock);
 	flush_tlb_all();
 	return error;
 }
diff --git a/arch/sh64/kernel/ptrace.c b/arch/sh64/kernel/ptrace.c
index fd2000956dae..71f2eec00b99 100644
--- a/arch/sh64/kernel/ptrace.c
+++ b/arch/sh64/kernel/ptrace.c
@@ -121,7 +121,7 @@ put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data)
 	return 0;
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
 {
 	struct task_struct *child;
 	extern void poke_real_address_q(unsigned long long addr, unsigned long long data);
diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c
index f4a62a10053c..870fe5327e09 100644
--- a/arch/sh64/kernel/time.c
+++ b/arch/sh64/kernel/time.c
@@ -116,8 +116,6 @@
 
 extern unsigned long wall_jiffies;
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
 static unsigned long tmu_base, rtc_base;
 unsigned long cprc_base;
 
@@ -253,6 +251,7 @@ int do_settimeofday(struct timespec *tv)
 
 	return 0;
 }
+EXPORT_SYMBOL(do_settimeofday);
 
 static int set_rtc_time(unsigned long nowtime)
 {
diff --git a/arch/sh64/mm/cache.c b/arch/sh64/mm/cache.c
index 3b87e25ea773..c0c1b21350d8 100644
--- a/arch/sh64/mm/cache.c
+++ b/arch/sh64/mm/cache.c
@@ -584,32 +584,36 @@ static void sh64_dcache_purge_phy_page(unsigned long paddr)
 	}
 }
 
-static void sh64_dcache_purge_user_page(struct mm_struct *mm, unsigned long eaddr)
+static void sh64_dcache_purge_user_pages(struct mm_struct *mm,
+				unsigned long addr, unsigned long end)
 {
 	pgd_t *pgd;
 	pmd_t *pmd;
 	pte_t *pte;
 	pte_t entry;
+	spinlock_t *ptl;
 	unsigned long paddr;
 
-	/* NOTE : all the callers of this have mm->page_table_lock held, so the
-	   following page table traversal is safe even on SMP/pre-emptible. */
-
-	if (!mm) return; /* No way to find physical address of page */
-	pgd = pgd_offset(mm, eaddr);
-	if (pgd_bad(*pgd)) return;
-
-	pmd = pmd_offset(pgd, eaddr);
-	if (pmd_none(*pmd) || pmd_bad(*pmd)) return;
-
-	pte = pte_offset_kernel(pmd, eaddr);
-	entry = *pte;
-	if (pte_none(entry) || !pte_present(entry)) return;
-
-	paddr = pte_val(entry) & PAGE_MASK;
-
-	sh64_dcache_purge_coloured_phy_page(paddr, eaddr);
-
+	if (!mm)
+		return; /* No way to find physical address of page */
+
+	pgd = pgd_offset(mm, addr);
+	if (pgd_bad(*pgd))
+		return;
+
+	pmd = pmd_offset(pgd, addr);
+	if (pmd_none(*pmd) || pmd_bad(*pmd))
+		return;
+
+	pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
+	do {
+		entry = *pte;
+		if (pte_none(entry) || !pte_present(entry))
+			continue;
+		paddr = pte_val(entry) & PAGE_MASK;
+		sh64_dcache_purge_coloured_phy_page(paddr, addr);
+	} while (pte++, addr += PAGE_SIZE, addr != end);
+	pte_unmap_unlock(pte - 1, ptl);
 }
 /****************************************************************************/
 
@@ -668,7 +672,7 @@ static void sh64_dcache_purge_user_range(struct mm_struct *mm,
 	int n_pages;
 
 	n_pages = ((end - start) >> PAGE_SHIFT);
-	if (n_pages >= 64) {
+	if (n_pages >= 64 || ((start ^ (end - 1)) & PMD_MASK)) {
 #if 1
 		sh64_dcache_purge_all();
 #else
@@ -707,20 +711,10 @@ static void sh64_dcache_purge_user_range(struct mm_struct *mm,
 		}
 #endif
 	} else {
-		/* 'Small' range */
-		unsigned long aligned_start;
-		unsigned long eaddr;
-		unsigned long last_page_start;
-
-		aligned_start = start & PAGE_MASK;
-		/* 'end' is 1 byte beyond the end of the range */
-		last_page_start = (end - 1) & PAGE_MASK;
-
-		eaddr = aligned_start;
-		while (eaddr <= last_page_start) {
-			sh64_dcache_purge_user_page(mm, eaddr);
-			eaddr += PAGE_SIZE;
-		}
+		/* Small range, covered by a single page table page */
+		start &= PAGE_MASK;	/* should already be so */
+		end = PAGE_ALIGN(end);	/* should already be so */
+		sh64_dcache_purge_user_pages(mm, start, end);
 	}
 	return;
 }
@@ -880,9 +874,7 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
 	   addresses from the user address space specified by mm, after writing
 	   back any dirty data.
 
-	   Note(1), 'end' is 1 byte beyond the end of the range to flush.
-
-	   Note(2), this is called with mm->page_table_lock held.*/
+	   Note, 'end' is 1 byte beyond the end of the range to flush. */
 
 	sh64_dcache_purge_user_range(mm, start, end);
 	sh64_icache_inv_user_page_range(mm, start, end);
@@ -898,7 +890,7 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long eaddr, unsigned
 	   the I-cache must be searched too in case the page in question is
 	   both writable and being executed from (e.g. stack trampolines.)
 
-	   Note(1), this is called with mm->page_table_lock held.
+	   Note, this is called with pte lock held.
 	   */
 
 	sh64_dcache_purge_phy_page(pfn << PAGE_SHIFT);
diff --git a/arch/sh64/mm/hugetlbpage.c b/arch/sh64/mm/hugetlbpage.c
index dcd9c8a8baf8..ed6a505b3ee2 100644
--- a/arch/sh64/mm/hugetlbpage.c
+++ b/arch/sh64/mm/hugetlbpage.c
@@ -54,41 +54,31 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 	return pte;
 }
 
-#define mk_pte_huge(entry) do { pte_val(entry) |= _PAGE_SZHUGE; } while (0)
-
-static void set_huge_pte(struct mm_struct *mm, struct vm_area_struct *vma,
-			 struct page *page, pte_t * page_table, int write_access)
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t entry)
 {
-	unsigned long i;
-	pte_t entry;
-
-	add_mm_counter(mm, rss, HPAGE_SIZE / PAGE_SIZE);
-
-	if (write_access)
-		entry = pte_mkwrite(pte_mkdirty(mk_pte(page,
-						       vma->vm_page_prot)));
-	else
-		entry = pte_wrprotect(mk_pte(page, vma->vm_page_prot));
-	entry = pte_mkyoung(entry);
-	mk_pte_huge(entry);
+	int i;
 
 	for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
-		set_pte(page_table, entry);
-		page_table++;
-
+		set_pte_at(mm, addr, ptep, entry);
+		ptep++;
+		addr += PAGE_SIZE;
 		pte_val(entry) += PAGE_SIZE;
 	}
 }
 
-pte_t huge_ptep_get_and_clear(pte_t *ptep)
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep)
 {
 	pte_t entry;
+	int i;
 
 	entry = *ptep;
 
 	for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
-		pte_clear(pte);
-		pte++;
+		pte_clear(mm, addr, ptep);
+		addr += PAGE_SIZE;
+		ptep++;
 	}
 
 	return entry;
@@ -106,79 +96,6 @@ int is_aligned_hugepage_range(unsigned long addr, unsigned long len)
 	return 0;
 }
 
-int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src,
-			    struct vm_area_struct *vma)
-{
-	pte_t *src_pte, *dst_pte, entry;
-	struct page *ptepage;
-	unsigned long addr = vma->vm_start;
-	unsigned long end = vma->vm_end;
-	int i;
-
-	while (addr < end) {
-		dst_pte = huge_pte_alloc(dst, addr);
-		if (!dst_pte)
-			goto nomem;
-		src_pte = huge_pte_offset(src, addr);
-		BUG_ON(!src_pte || pte_none(*src_pte));
-		entry = *src_pte;
-		ptepage = pte_page(entry);
-		get_page(ptepage);
-		for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
-			set_pte(dst_pte, entry);
-			pte_val(entry) += PAGE_SIZE;
-			dst_pte++;
-		}
-		add_mm_counter(dst, rss, HPAGE_SIZE / PAGE_SIZE);
-		addr += HPAGE_SIZE;
-	}
-	return 0;
-
-nomem:
-	return -ENOMEM;
-}
-
-int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma,
-			struct page **pages, struct vm_area_struct **vmas,
-			unsigned long *position, int *length, int i)
-{
-	unsigned long vaddr = *position;
-	int remainder = *length;
-
-	WARN_ON(!is_vm_hugetlb_page(vma));
-
-	while (vaddr < vma->vm_end && remainder) {
-		if (pages) {
-			pte_t *pte;
-			struct page *page;
-
-			pte = huge_pte_offset(mm, vaddr);
-
-			/* hugetlb should be locked, and hence, prefaulted */
-			BUG_ON(!pte || pte_none(*pte));
-
-			page = pte_page(*pte);
-
-			WARN_ON(!PageCompound(page));
-
-			get_page(page);
-			pages[i] = page;
-		}
-
-		if (vmas)
-			vmas[i] = vma;
-
-		vaddr += PAGE_SIZE;
-		--remainder;
-		++i;
-	}
-
-	*length = remainder;
-	*position = vaddr;
-
-	return i;
-}
-
 struct page *follow_huge_addr(struct mm_struct *mm,
 			      unsigned long address, int write)
 {
@@ -195,84 +112,3 @@ struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 {
 	return NULL;
 }
-
-void unmap_hugepage_range(struct vm_area_struct *vma,
-			  unsigned long start, unsigned long end)
-{
-	struct mm_struct *mm = vma->vm_mm;
-	unsigned long address;
-	pte_t *pte;
-	struct page *page;
-	int i;
-
-	BUG_ON(start & (HPAGE_SIZE - 1));
-	BUG_ON(end & (HPAGE_SIZE - 1));
-
-	for (address = start; address < end; address += HPAGE_SIZE) {
-		pte = huge_pte_offset(mm, address);
-		BUG_ON(!pte);
-		if (pte_none(*pte))
-			continue;
-		page = pte_page(*pte);
-		put_page(page);
-		for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
-			pte_clear(mm, address+(i*PAGE_SIZE), pte);
-			pte++;
-		}
-	}
-	add_mm_counter(mm, rss, -((end - start) >> PAGE_SHIFT));
-	flush_tlb_range(vma, start, end);
-}
-
-int hugetlb_prefault(struct address_space *mapping, struct vm_area_struct *vma)
-{
-	struct mm_struct *mm = current->mm;
-	unsigned long addr;
-	int ret = 0;
-
-	BUG_ON(vma->vm_start & ~HPAGE_MASK);
-	BUG_ON(vma->vm_end & ~HPAGE_MASK);
-
-	spin_lock(&mm->page_table_lock);
-	for (addr = vma->vm_start; addr < vma->vm_end; addr += HPAGE_SIZE) {
-		unsigned long idx;
-		pte_t *pte = huge_pte_alloc(mm, addr);
-		struct page *page;
-
-		if (!pte) {
-			ret = -ENOMEM;
-			goto out;
-		}
-		if (!pte_none(*pte))
-			continue;
-
-		idx = ((addr - vma->vm_start) >> HPAGE_SHIFT)
-			+ (vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT));
-		page = find_get_page(mapping, idx);
-		if (!page) {
-			/* charge the fs quota first */
-			if (hugetlb_get_quota(mapping)) {
-				ret = -ENOMEM;
-				goto out;
-			}
-			page = alloc_huge_page();
-			if (!page) {
-				hugetlb_put_quota(mapping);
-				ret = -ENOMEM;
-				goto out;
-			}
-			ret = add_to_page_cache(page, mapping, idx, GFP_ATOMIC);
-			if (! ret) {
-				unlock_page(page);
-			} else {
-				hugetlb_put_quota(mapping);
-				free_huge_page(page);
-				goto out;
-			}
-		}
-		set_huge_pte(mm, vma, page, pte, vma->vm_flags & VM_WRITE);
-	}
-out:
-	spin_unlock(&mm->page_table_lock);
-	return ret;
-}
diff --git a/arch/sh64/mm/ioremap.c b/arch/sh64/mm/ioremap.c
index f4003da556bc..fb1866fa2c9d 100644
--- a/arch/sh64/mm/ioremap.c
+++ b/arch/sh64/mm/ioremap.c
@@ -79,7 +79,7 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned lo
 		BUG();
 
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -101,7 +101,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 	flush_cache_all();
 	if (address >= end)
 		BUG();
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		pmd_t *pmd = pmd_alloc(&init_mm, dir, address);
 		error = -ENOMEM;
@@ -115,7 +114,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	} while (address && (address < end));
-	spin_unlock(&init_mm.page_table_lock);
 	flush_tlb_all();
 	return 0;
 }
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index 36a40697b8d6..25e31d5ec99b 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -497,8 +497,8 @@ static void pcic_map_pci_device(struct linux_pcic *pcic,
 				 * CheerIO makes a similar conversion.
 				 * See ebus.c for details.
 				 *
-				 * Note that check_region()/request_region()
-				 * work for these devices.
+				 * Note that request_region()
+				 * works for these devices.
 				 *
 				 * XXX Neat trick, but it's a *bad* idea
 				 * to shit into regions like that.
diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c
index 279a62627c10..24814d58f9e1 100644
--- a/arch/sparc/kernel/time.c
+++ b/arch/sparc/kernel/time.c
@@ -45,10 +45,6 @@
 
 extern unsigned long wall_jiffies;
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 DEFINE_SPINLOCK(rtc_lock);
 enum sparc_clock_type sp_clock_typ;
 DEFINE_SPINLOCK(mostek_lock);
diff --git a/arch/sparc/mm/generic.c b/arch/sparc/mm/generic.c
index 20ccb957fb77..9604893ffdbd 100644
--- a/arch/sparc/mm/generic.c
+++ b/arch/sparc/mm/generic.c
@@ -73,14 +73,16 @@ int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
 	int space = GET_IOSPACE(pfn);
 	unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
 
+	/* See comment in mm/memory.c remap_pfn_range */
+	vma->vm_flags |= VM_IO | VM_RESERVED;
+
 	prot = __pgprot(pg_iobits);
 	offset -= from;
 	dir = pgd_offset(mm, from);
 	flush_cache_range(vma, beg, end);
 
-	spin_lock(&mm->page_table_lock);
 	while (from < end) {
-		pmd_t *pmd = pmd_alloc(current->mm, dir, from);
+		pmd_t *pmd = pmd_alloc(mm, dir, from);
 		error = -ENOMEM;
 		if (!pmd)
 			break;
@@ -90,7 +92,6 @@ int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
 		from = (from + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	}
-	spin_unlock(&mm->page_table_lock);
 
 	flush_tlb_range(vma, beg, end);
 	return error;
diff --git a/arch/sparc64/kernel/binfmt_aout32.c b/arch/sparc64/kernel/binfmt_aout32.c
index b2854ef221d0..edf52d06b280 100644
--- a/arch/sparc64/kernel/binfmt_aout32.c
+++ b/arch/sparc64/kernel/binfmt_aout32.c
@@ -241,7 +241,6 @@ static int load_aout32_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	current->mm->brk = ex.a_bss +
 		(current->mm->start_brk = N_BSSADDR(ex));
 
-	set_mm_counter(current->mm, rss, 0);
 	current->mm->mmap = NULL;
 	compute_creds(bprm);
  	current->flags &= ~PF_FORKNOEXEC;
diff --git a/arch/sparc64/kernel/ioctl32.c b/arch/sparc64/kernel/ioctl32.c
index 43fc3173d480..e6a00325075a 100644
--- a/arch/sparc64/kernel/ioctl32.c
+++ b/arch/sparc64/kernel/ioctl32.c
@@ -475,9 +475,6 @@ IOCTL_TABLE_START
 #include <linux/compat_ioctl.h>
 #define DECLARES
 #include "compat_ioctl.c"
-COMPATIBLE_IOCTL(TIOCSTART)
-COMPATIBLE_IOCTL(TIOCSTOP)
-COMPATIBLE_IOCTL(TIOCSLTC)
 COMPATIBLE_IOCTL(FBIOGTYPE)
 COMPATIBLE_IOCTL(FBIOSATTR)
 COMPATIBLE_IOCTL(FBIOGATTR)
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index 3f08a32f51a1..38c5525087a2 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -55,10 +55,6 @@ unsigned long ds1287_regs = 0UL;
 
 extern unsigned long wall_jiffies;
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 static void __iomem *mstk48t08_regs;
 static void __iomem *mstk48t59_regs;
 
diff --git a/arch/sparc64/mm/generic.c b/arch/sparc64/mm/generic.c
index c954d91f01d0..112c316e7cd2 100644
--- a/arch/sparc64/mm/generic.c
+++ b/arch/sparc64/mm/generic.c
@@ -127,14 +127,16 @@ int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
 	int space = GET_IOSPACE(pfn);
 	unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
 
+	/* See comment in mm/memory.c remap_pfn_range */
+	vma->vm_flags |= VM_IO | VM_RESERVED;
+
 	prot = __pgprot(pg_iobits);
 	offset -= from;
 	dir = pgd_offset(mm, from);
 	flush_cache_range(vma, beg, end);
 
-	spin_lock(&mm->page_table_lock);
 	while (from < end) {
-		pud_t *pud = pud_alloc(current->mm, dir, from);
+		pud_t *pud = pud_alloc(mm, dir, from);
 		error = -ENOMEM;
 		if (!pud)
 			break;
@@ -144,8 +146,7 @@ int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
 		from = (from + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	}
-	flush_tlb_range(vma, beg, end);
-	spin_unlock(&mm->page_table_lock);
 
+	flush_tlb_range(vma, beg, end);
 	return error;
 }
diff --git a/arch/sparc64/mm/tlb.c b/arch/sparc64/mm/tlb.c
index 90ca99d0b89c..8b104be4662b 100644
--- a/arch/sparc64/mm/tlb.c
+++ b/arch/sparc64/mm/tlb.c
@@ -18,8 +18,7 @@
 
 /* Heavily inspired by the ppc64 code.  */
 
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers) =
-	{ NULL, 0, 0, 0, 0, 0, { 0 }, { NULL }, };
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers) = { 0, };
 
 void flush_tlb_pending(void)
 {
@@ -72,7 +71,7 @@ void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t
 
 no_cache_flush:
 
-	if (mp->tlb_frozen)
+	if (mp->fullmm)
 		return;
 
 	nr = mp->tlb_nr;
@@ -97,7 +96,7 @@ void flush_tlb_pgtables(struct mm_struct *mm, unsigned long start, unsigned long
 	unsigned long nr = mp->tlb_nr;
 	long s = start, e = end, vpte_base;
 
-	if (mp->tlb_frozen)
+	if (mp->fullmm)
 		return;
 
 	/* If start is greater than end, that is a real problem.  */
diff --git a/arch/sparc64/solaris/socksys.c b/arch/sparc64/solaris/socksys.c
index d7c1c76582cc..fc6669e8dde1 100644
--- a/arch/sparc64/solaris/socksys.c
+++ b/arch/sparc64/solaris/socksys.c
@@ -49,7 +49,7 @@ IPPROTO_EGP, IPPROTO_PUP, IPPROTO_UDP, IPPROTO_IDP, IPPROTO_RAW,
 
 #else
 
-extern void * mykmalloc(size_t s, int gfp);
+extern void * mykmalloc(size_t s, gfp_t gfp);
 extern void mykfree(void *);
 
 #endif
diff --git a/arch/sparc64/solaris/timod.c b/arch/sparc64/solaris/timod.c
index aaad29c35c83..b84e5456b025 100644
--- a/arch/sparc64/solaris/timod.c
+++ b/arch/sparc64/solaris/timod.c
@@ -39,7 +39,7 @@ static char * page = NULL ;
 
 #else
 
-void * mykmalloc(size_t s, int gfp)
+void * mykmalloc(size_t s, gfp_t gfp)
 {
 	static char * page;
 	static size_t free;
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 684e1f8b2755..cd06ed7d842d 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -27,10 +27,6 @@ config UID16
 	bool
 	default y
 
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
 config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
@@ -40,6 +36,12 @@ config IRQ_RELEASE_METHOD
 	bool
 	default y
 
+menu "Host processor type and features"
+
+source "arch/i386/Kconfig.cpu"
+
+endmenu
+
 menu "UML-specific options"
 
 config MODE_TT
diff --git a/arch/um/Kconfig.x86_64 b/arch/um/Kconfig.x86_64
index bd35e59419c8..aae19bc4b06a 100644
--- a/arch/um/Kconfig.x86_64
+++ b/arch/um/Kconfig.x86_64
@@ -6,6 +6,11 @@ config 64BIT
 	bool
 	default y
 
+#XXX: this is so in the underlying arch, but it's wrong!!!
+config RWSEM_GENERIC_SPINLOCK
+	bool
+	default y
+
 config SEMAPHORE_SLEEPERS
 	bool
 	default y
diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386
index 2ee8a2858117..aef7c50f8e13 100644
--- a/arch/um/Makefile-i386
+++ b/arch/um/Makefile-i386
@@ -29,6 +29,12 @@ endif
 
 CFLAGS += -U__$(SUBARCH)__ -U$(SUBARCH)
 
-ifneq ($(CONFIG_GPROF),y)
-ARCH_CFLAGS += -DUM_FASTCALL
-endif
+# First of all, tune CFLAGS for the specific CPU. This actually sets cflags-y.
+include $(srctree)/arch/i386/Makefile.cpu
+
+# prevent gcc from keeping the stack 16 byte aligned. Taken from i386.
+cflags-y += $(call cc-option,-mpreferred-stack-boundary=2)
+
+CFLAGS += $(cflags-y)
+USER_CFLAGS += $(cflags-y)
+
diff --git a/arch/um/include/sysdep-i386/syscalls.h b/arch/um/include/sysdep-i386/syscalls.h
index a0d5b74d3731..57bd79efbee3 100644
--- a/arch/um/include/sysdep-i386/syscalls.h
+++ b/arch/um/include/sysdep-i386/syscalls.h
@@ -11,7 +11,6 @@ typedef long syscall_handler_t(struct pt_regs);
 /* Not declared on x86, incompatible declarations on x86_64, so these have
  * to go here rather than in sys_call_table.c
  */
-extern syscall_handler_t sys_ptrace;
 extern syscall_handler_t sys_rt_sigaction;
 
 extern syscall_handler_t old_mmap_i386;
diff --git a/arch/um/include/tlb.h b/arch/um/include/tlb.h
index 45d7da6c3b2c..8efc1e0f1b84 100644
--- a/arch/um/include/tlb.h
+++ b/arch/um/include/tlb.h
@@ -34,7 +34,6 @@ struct host_vm_op {
 	} u;
 };
 
-extern void mprotect_kernel_vm(int w);
 extern void force_flush_all(void);
 extern void fix_range_common(struct mm_struct *mm, unsigned long start_addr,
                              unsigned long end_addr, int force,
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index ea008b031a8f..462cc9d65386 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -252,7 +252,7 @@ void paging_init(void)
 #endif
 }
 
-struct page *arch_validate(struct page *page, int mask, int order)
+struct page *arch_validate(struct page *page, gfp_t mask, int order)
 {
 	unsigned long addr, zero = 0;
 	int i;
diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c
index ea65db679e9c..34b54a3e2132 100644
--- a/arch/um/kernel/process_kern.c
+++ b/arch/um/kernel/process_kern.c
@@ -80,7 +80,7 @@ void free_stack(unsigned long stack, int order)
 unsigned long alloc_stack(int order, int atomic)
 {
 	unsigned long page;
-	int flags = GFP_KERNEL;
+	gfp_t flags = GFP_KERNEL;
 
 	if (atomic)
 		flags = GFP_ATOMIC;
@@ -222,6 +222,7 @@ void *um_virt_to_phys(struct task_struct *task, unsigned long addr,
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
+	pte_t ptent;
 
 	if(task->mm == NULL) 
 		return(ERR_PTR(-EINVAL));
@@ -238,12 +239,13 @@ void *um_virt_to_phys(struct task_struct *task, unsigned long addr,
 		return(ERR_PTR(-EINVAL));
 
 	pte = pte_offset_kernel(pmd, addr);
-	if(!pte_present(*pte)) 
+	ptent = *pte;
+	if(!pte_present(ptent))
 		return(ERR_PTR(-EINVAL));
 
 	if(pte_out != NULL)
-		*pte_out = *pte;
-	return((void *) (pte_val(*pte) & PAGE_MASK) + (addr & ~PAGE_MASK));
+		*pte_out = ptent;
+	return((void *) (pte_val(ptent) & PAGE_MASK) + (addr & ~PAGE_MASK));
 }
 
 char *current_cmd(void)
diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c
index 240143b616a2..9e5e39cea821 100644
--- a/arch/um/kernel/skas/mmu.c
+++ b/arch/um/kernel/skas/mmu.c
@@ -28,7 +28,6 @@ static int init_stub_pte(struct mm_struct *mm, unsigned long proc,
 	pmd_t *pmd;
 	pte_t *pte;
 
-	spin_lock(&mm->page_table_lock);
 	pgd = pgd_offset(mm, proc);
 	pud = pud_alloc(mm, pgd, proc);
 	if (!pud)
@@ -63,7 +62,6 @@ static int init_stub_pte(struct mm_struct *mm, unsigned long proc,
 	*pte = mk_pte(virt_to_page(kernel), __pgprot(_PAGE_PRESENT));
 	*pte = pte_mkexec(*pte);
 	*pte = pte_wrprotect(*pte);
-	spin_unlock(&mm->page_table_lock);
 	return(0);
 
  out_pmd:
@@ -71,7 +69,6 @@ static int init_stub_pte(struct mm_struct *mm, unsigned long proc,
  out_pte:
 	pmd_free(pmd);
  out:
-	spin_unlock(&mm->page_table_lock);
 	return(-ENOMEM);
 }
 
@@ -147,6 +144,7 @@ void destroy_context_skas(struct mm_struct *mm)
 
 	if(!proc_mm || !ptrace_faultinfo){
 		free_page(mmu->id.stack);
+		pte_lock_deinit(virt_to_page(mmu->last_page_table));
 		pte_free_kernel((pte_t *) mmu->last_page_table);
                 dec_page_state(nr_page_table_pages);
 #ifdef CONFIG_3_LEVEL_PGTABLES
diff --git a/arch/um/kernel/time_kern.c b/arch/um/kernel/time_kern.c
index 4e08f7545d63..020ca79b8d33 100644
--- a/arch/um/kernel/time_kern.c
+++ b/arch/um/kernel/time_kern.c
@@ -22,10 +22,6 @@
 #include "mode.h"
 #include "os.h"
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 int hz(void)
 {
 	return(HZ);
diff --git a/arch/um/kernel/tt/tlb.c b/arch/um/kernel/tt/tlb.c
index f1d85dbb45b9..ae6217c86135 100644
--- a/arch/um/kernel/tt/tlb.c
+++ b/arch/um/kernel/tt/tlb.c
@@ -74,42 +74,6 @@ void flush_tlb_kernel_range_tt(unsigned long start, unsigned long end)
                 atomic_inc(&vmchange_seq);
 }
 
-static void protect_vm_page(unsigned long addr, int w, int must_succeed)
-{
-	int err;
-
-	err = protect_memory(addr, PAGE_SIZE, 1, w, 1, must_succeed);
-	if(err == 0) return;
-	else if((err == -EFAULT) || (err == -ENOMEM)){
-		flush_tlb_kernel_range(addr, addr + PAGE_SIZE);
-		protect_vm_page(addr, w, 1);
-	}
-	else panic("protect_vm_page : protect failed, errno = %d\n", err);
-}
-
-void mprotect_kernel_vm(int w)
-{
-	struct mm_struct *mm;
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *pte;
-	unsigned long addr;
-	
-	mm = &init_mm;
-	for(addr = start_vm; addr < end_vm;){
-		pgd = pgd_offset(mm, addr);
-		pud = pud_offset(pgd, addr);
-		pmd = pmd_offset(pud, addr);
-		if(pmd_present(*pmd)){
-			pte = pte_offset_kernel(pmd, addr);
-			if(pte_present(*pte)) protect_vm_page(addr, w, 0);
-			addr += PAGE_SIZE;
-		}
-		else addr += PMD_SIZE;
-	}
-}
-
 void flush_tlb_kernel_vm_tt(void)
 {
         flush_tlb_kernel_range(start_vm, end_vm);
diff --git a/arch/v850/kernel/ptrace.c b/arch/v850/kernel/ptrace.c
index 4726b87f5e5a..d6077ff47d22 100644
--- a/arch/v850/kernel/ptrace.c
+++ b/arch/v850/kernel/ptrace.c
@@ -113,7 +113,7 @@ static int set_single_step (struct task_struct *t, int val)
 	return 1;
 }
 
-int sys_ptrace(long request, long pid, long addr, long data)
+long sys_ptrace(long request, long pid, long addr, long data)
 {
 	struct task_struct *child;
 	int rval;
diff --git a/arch/v850/kernel/time.c b/arch/v850/kernel/time.c
index ea3fd8844ff0..c1e85c2aef65 100644
--- a/arch/v850/kernel/time.c
+++ b/arch/v850/kernel/time.c
@@ -26,10 +26,6 @@
 
 #include "mach.h"
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 #define TICK_SIZE	(tick_nsec / 1000)
 
 /*
diff --git a/arch/x86_64/ia32/ia32_aout.c b/arch/x86_64/ia32/ia32_aout.c
index 3e6780fa0186..93c60f4aa47a 100644
--- a/arch/x86_64/ia32/ia32_aout.c
+++ b/arch/x86_64/ia32/ia32_aout.c
@@ -314,7 +314,6 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	current->mm->free_area_cache = TASK_UNMAPPED_BASE;
 	current->mm->cached_hole_size = 0;
 
-	set_mm_counter(current->mm, rss, 0);
 	current->mm->mmap = NULL;
 	compute_creds(bprm);
  	current->flags &= ~PF_FORKNOEXEC;
diff --git a/arch/x86_64/ia32/ia32_ioctl.c b/arch/x86_64/ia32/ia32_ioctl.c
index 419758f19ca4..4ba0e293d5e5 100644
--- a/arch/x86_64/ia32/ia32_ioctl.c
+++ b/arch/x86_64/ia32/ia32_ioctl.c
@@ -12,40 +12,11 @@
 #define INCLUDES
 #include <linux/syscalls.h>
 #include "compat_ioctl.c"
-#include <asm/mtrr.h>
 #include <asm/ia32.h>
 
 #define CODE
 #include "compat_ioctl.c"
   
-#ifndef TIOCGDEV
-#define TIOCGDEV       _IOR('T',0x32, unsigned int)
-#endif
-static int tiocgdev(unsigned fd, unsigned cmd,  unsigned int __user *ptr) 
-{ 
-
-	struct file *file;
-	struct tty_struct *real_tty;
-	int fput_needed, ret;
-
-	file = fget_light(fd, &fput_needed);
-	if (!file)
-		return -EBADF;
-
-	ret = -EINVAL;
-	if (file->f_op->ioctl != tty_ioctl)
-		goto out;
-	real_tty = (struct tty_struct *)file->private_data;
-	if (!real_tty) 	
-		goto out;
-
-	ret = put_user(new_encode_dev(tty_devnum(real_tty)), ptr); 
-
-out:
-	fput_light(file, fput_needed);
-	return ret;
-} 
-
 #define RTC_IRQP_READ32	_IOR('p', 0x0b, unsigned int)	 /* Read IRQ rate   */
 #define RTC_IRQP_SET32	_IOW('p', 0x0c, unsigned int)	 /* Set IRQ rate    */
 #define RTC_EPOCH_READ32	_IOR('p', 0x0d, unsigned)	 /* Read epoch      */
@@ -85,90 +56,6 @@ static int rtc32_ioctl(unsigned fd, unsigned cmd, unsigned long arg)
 	return sys_ioctl(fd,cmd,arg); 
 } 
 
-/* /proc/mtrr ioctls */
-
-
-struct mtrr_sentry32
-{
-    compat_ulong_t base;    /*  Base address     */
-    compat_uint_t size;    /*  Size of region   */
-    compat_uint_t type;     /*  Type of region   */
-};
-
-struct mtrr_gentry32
-{
-    compat_ulong_t regnum;   /*  Register number  */
-    compat_uint_t base;    /*  Base address     */
-    compat_uint_t size;    /*  Size of region   */
-    compat_uint_t type;     /*  Type of region   */
-};
-
-#define	MTRR_IOCTL_BASE	'M'
-
-#define MTRRIOC32_ADD_ENTRY        _IOW(MTRR_IOCTL_BASE,  0, struct mtrr_sentry32)
-#define MTRRIOC32_SET_ENTRY        _IOW(MTRR_IOCTL_BASE,  1, struct mtrr_sentry32)
-#define MTRRIOC32_DEL_ENTRY        _IOW(MTRR_IOCTL_BASE,  2, struct mtrr_sentry32)
-#define MTRRIOC32_GET_ENTRY        _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry32)
-#define MTRRIOC32_KILL_ENTRY       _IOW(MTRR_IOCTL_BASE,  4, struct mtrr_sentry32)
-#define MTRRIOC32_ADD_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  5, struct mtrr_sentry32)
-#define MTRRIOC32_SET_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  6, struct mtrr_sentry32)
-#define MTRRIOC32_DEL_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  7, struct mtrr_sentry32)
-#define MTRRIOC32_GET_PAGE_ENTRY   _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry32)
-#define MTRRIOC32_KILL_PAGE_ENTRY  _IOW(MTRR_IOCTL_BASE,  9, struct mtrr_sentry32)
-
-
-static int mtrr_ioctl32(unsigned int fd, unsigned int cmd, unsigned long arg)
-{ 
-	struct mtrr_gentry g;
-	struct mtrr_sentry s;
-	int get = 0, err = 0; 
-	struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)arg; 
-	mm_segment_t oldfs = get_fs(); 
-
-	switch (cmd) { 
-#define SET(x) case MTRRIOC32_ ## x ## _ENTRY: cmd = MTRRIOC_ ## x ## _ENTRY; break 
-#define GET(x) case MTRRIOC32_ ## x ## _ENTRY: cmd = MTRRIOC_ ## x ## _ENTRY; get=1; break
-		SET(ADD);
-		SET(SET); 
-		SET(DEL);
-		GET(GET); 
-		SET(KILL);
-		SET(ADD_PAGE); 
-		SET(SET_PAGE); 
-		SET(DEL_PAGE); 
-		GET(GET_PAGE); 
-		SET(KILL_PAGE); 
-	} 
-	
-	if (get) { 
-		err = get_user(g.regnum, &g32->regnum);
-		err |= get_user(g.base, &g32->base);
-		err |= get_user(g.size, &g32->size);
-		err |= get_user(g.type, &g32->type); 
-
-		arg = (unsigned long)&g; 
-	} else { 
-		struct mtrr_sentry32 __user *s32 = (struct mtrr_sentry32 __user *)arg;
-		err = get_user(s.base, &s32->base);
-		err |= get_user(s.size, &s32->size);
-		err |= get_user(s.type, &s32->type);
-
-		arg = (unsigned long)&s; 
-	} 
-	if (err) return err;
-	
-	set_fs(KERNEL_DS); 
-	err = sys_ioctl(fd, cmd, arg); 
-	set_fs(oldfs); 
-		
-	if (!err && get) { 
-		err = put_user(g.base, &g32->base);
-		err |= put_user(g.size, &g32->size);
-		err |= put_user(g.regnum, &g32->regnum);
-		err |= put_user(g.type, &g32->type); 
-	} 
-	return err;
-} 
 
 #define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl_trans_handler_t)(handler) }, 
 #define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL(cmd,sys_ioctl)
@@ -185,7 +72,6 @@ COMPATIBLE_IOCTL(0x4B51)   /* KDSHWCLK - not in the kernel, but don't complain *
 COMPATIBLE_IOCTL(FIOQSIZE)
 
 /* And these ioctls need translation */
-HANDLE_IOCTL(TIOCGDEV, tiocgdev)
 /* realtime device */
 HANDLE_IOCTL(RTC_IRQP_READ,  rtc32_ioctl)
 HANDLE_IOCTL(RTC_IRQP_READ32,rtc32_ioctl)
@@ -193,17 +79,6 @@ HANDLE_IOCTL(RTC_IRQP_SET32, rtc32_ioctl)
 HANDLE_IOCTL(RTC_EPOCH_READ32, rtc32_ioctl)
 HANDLE_IOCTL(RTC_EPOCH_SET32, rtc32_ioctl)
 /* take care of sizeof(sizeof()) breakage */
-/* mtrr */
-HANDLE_IOCTL(MTRRIOC32_ADD_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_SET_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_DEL_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_GET_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_KILL_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_ADD_PAGE_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_SET_PAGE_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_DEL_PAGE_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_GET_PAGE_ENTRY, mtrr_ioctl32)
-HANDLE_IOCTL(MTRRIOC32_KILL_PAGE_ENTRY, mtrr_ioctl32)
 }; 
 
 int ioctl_table_size = ARRAY_SIZE(ioctl_start);
diff --git a/arch/x86_64/kernel/i8259.c b/arch/x86_64/kernel/i8259.c
index b2a238b5a17e..c6c9791d77c1 100644
--- a/arch/x86_64/kernel/i8259.c
+++ b/arch/x86_64/kernel/i8259.c
@@ -494,7 +494,7 @@ void invalidate_interrupt7(void);
 void thermal_interrupt(void);
 void i8254_timer_resume(void);
 
-static void setup_timer(void)
+static void setup_timer_hardware(void)
 {
 	outb_p(0x34,0x43);		/* binary, mode 2, LSB/MSB, ch 0 */
 	udelay(10);
@@ -505,13 +505,13 @@ static void setup_timer(void)
 
 static int timer_resume(struct sys_device *dev)
 {
-	setup_timer();
+	setup_timer_hardware();
 	return 0;
 }
 
 void i8254_timer_resume(void)
 {
-	setup_timer();
+	setup_timer_hardware();
 }
 
 static struct sysdev_class timer_sysclass = {
@@ -594,7 +594,7 @@ void __init init_IRQ(void)
 	 * Set the clock to HZ Hz, we already have a valid
 	 * vector now:
 	 */
-	setup_timer();
+	setup_timer_hardware();
 
 	if (!acpi_ioapic)
 		setup_irq(2, &irq2);
diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c
index cf0a0315d586..88be97c96987 100644
--- a/arch/x86_64/kernel/pci-gart.c
+++ b/arch/x86_64/kernel/pci-gart.c
@@ -187,7 +187,7 @@ static void flush_gart(struct device *dev)
 
 /* Allocate DMA memory on node near device */
 noinline
-static void *dma_alloc_pages(struct device *dev, unsigned gfp, unsigned order)
+static void *dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order)
 {
 	struct page *page;
 	int node;
@@ -204,7 +204,7 @@ static void *dma_alloc_pages(struct device *dev, unsigned gfp, unsigned order)
  */
 void *
 dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
-		   unsigned gfp)
+		   gfp_t gfp)
 {
 	void *memory;
 	unsigned long dma_mask = 0;
diff --git a/arch/x86_64/kernel/pci-nommu.c b/arch/x86_64/kernel/pci-nommu.c
index 67d90b89af0b..5a981dca87ff 100644
--- a/arch/x86_64/kernel/pci-nommu.c
+++ b/arch/x86_64/kernel/pci-nommu.c
@@ -24,7 +24,7 @@ EXPORT_SYMBOL(iommu_sac_force);
  */
 
 void *dma_alloc_coherent(struct device *hwdev, size_t size,
-			 dma_addr_t *dma_handle, unsigned gfp)
+			 dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
 	u64 mask;
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index cb28df14ff6f..da0bc3e7bdf5 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -1213,7 +1213,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 
 		/* Intel-defined (#2) */
-		"pni", NULL, NULL, "monitor", "ds_cpl", NULL, NULL, "est",
+		"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", NULL, "est",
 		"tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
diff --git a/arch/x86_64/kernel/suspend.c b/arch/x86_64/kernel/suspend.c
index f066c6ab3618..fd2bef780882 100644
--- a/arch/x86_64/kernel/suspend.c
+++ b/arch/x86_64/kernel/suspend.c
@@ -63,13 +63,12 @@ void save_processor_state(void)
 	__save_processor_state(&saved_context);
 }
 
-static void
-do_fpu_end(void)
+static void do_fpu_end(void)
 {
-        /* restore FPU regs if necessary */
-	/* Do it out of line so that gcc does not move cr0 load to some stupid place */
-        kernel_fpu_end();
-	mxcsr_feature_mask_init();
+	/*
+	 * Restore FPU regs if necessary
+	 */
+	kernel_fpu_end();
 }
 
 void __restore_processor_state(struct saved_context *ctxt)
@@ -148,57 +147,7 @@ extern int restore_image(void);
 
 pgd_t *temp_level4_pgt;
 
-static void **pages;
-
-static inline void *__add_page(void)
-{
-	void **c;
-
-	c = (void **)get_usable_page(GFP_ATOMIC);
-	if (c) {
-		*c = pages;
-		pages = c;
-	}
-	return c;
-}
-
-static inline void *__next_page(void)
-{
-	void **c;
-
-	c = pages;
-	if (c) {
-		pages = *c;
-		*c = NULL;
-	}
-	return c;
-}
-
-/*
- * Try to allocate as many usable pages as needed and daisy chain them.
- * If one allocation fails, free the pages allocated so far
- */
-static int alloc_usable_pages(unsigned long n)
-{
-	void *p;
-
-	pages = NULL;
-	do
-		if (!__add_page())
-			break;
-	while (--n);
-	if (n) {
-		p = __next_page();
-		while (p) {
-			free_page((unsigned long)p);
-			p = __next_page();
-		}
-		return -ENOMEM;
-	}
-	return 0;
-}
-
-static void res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long end)
+static int res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long end)
 {
 	long i, j;
 
@@ -212,7 +161,9 @@ static void res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long e
 		if (paddr >= end)
 			break;
 
-		pmd = (pmd_t *)__next_page();
+		pmd = (pmd_t *)get_safe_page(GFP_ATOMIC);
+		if (!pmd)
+			return -ENOMEM;
 		set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE));
 		for (j = 0; j < PTRS_PER_PMD; pmd++, j++, paddr += PMD_SIZE) {
 			unsigned long pe;
@@ -224,13 +175,17 @@ static void res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long e
 			set_pmd(pmd, __pmd(pe));
 		}
 	}
+	return 0;
 }
 
-static void set_up_temporary_mappings(void)
+static int set_up_temporary_mappings(void)
 {
 	unsigned long start, end, next;
+	int error;
 
-	temp_level4_pgt = (pgd_t *)__next_page();
+	temp_level4_pgt = (pgd_t *)get_safe_page(GFP_ATOMIC);
+	if (!temp_level4_pgt)
+		return -ENOMEM;
 
 	/* It is safe to reuse the original kernel mapping */
 	set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map),
@@ -241,29 +196,27 @@ static void set_up_temporary_mappings(void)
 	end = (unsigned long)pfn_to_kaddr(end_pfn);
 
 	for (; start < end; start = next) {
-		pud_t *pud = (pud_t *)__next_page();
+		pud_t *pud = (pud_t *)get_safe_page(GFP_ATOMIC);
+		if (!pud)
+			return -ENOMEM;
 		next = start + PGDIR_SIZE;
 		if (next > end)
 			next = end;
-		res_phys_pud_init(pud, __pa(start), __pa(next));
+		if ((error = res_phys_pud_init(pud, __pa(start), __pa(next))))
+			return error;
 		set_pgd(temp_level4_pgt + pgd_index(start),
 			mk_kernel_pgd(__pa(pud)));
 	}
+	return 0;
 }
 
 int swsusp_arch_resume(void)
 {
-	unsigned long n;
+	int error;
 
-	n = ((end_pfn << PAGE_SHIFT) + PUD_SIZE - 1) >> PUD_SHIFT;
-	n += (n + PTRS_PER_PUD - 1) / PTRS_PER_PUD + 1;
-	pr_debug("swsusp_arch_resume(): pages needed = %lu\n", n);
-	if (alloc_usable_pages(n)) {
-		free_eaten_memory();
-		return -ENOMEM;
-	}
 	/* We have got enough memory and from now on we cannot recover */
-	set_up_temporary_mappings();
+	if ((error = set_up_temporary_mappings()))
+		return error;
 	restore_image();
 	return 0;
 }
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 703acde2a1a5..fdaddc4e5284 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -42,10 +42,6 @@
 #include <asm/apic.h>
 #endif
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 #ifdef CONFIG_CPU_FREQ
 static void cpufreq_delayed_get(void);
 #endif
@@ -481,9 +477,9 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 static unsigned int cyc2ns_scale;
 #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
 
-static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+static inline void set_cyc2ns_scale(unsigned long cpu_khz)
 {
-	cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+	cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
 }
 
 static inline unsigned long long cycles_2_ns(unsigned long long cyc)
@@ -655,7 +651,7 @@ static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 			vxtime.tsc_quot = (1000L << 32) / cpu_khz;
 	}
 	
-	set_cyc2ns_scale(cpu_khz_ref / 1000);
+	set_cyc2ns_scale(cpu_khz_ref);
 
 	return 0;
 }
@@ -939,7 +935,7 @@ void __init time_init(void)
 	rdtscll_sync(&vxtime.last_tsc);
 	setup_irq(0, &irq0);
 
-	set_cyc2ns_scale(cpu_khz / 1000);
+	set_cyc2ns_scale(cpu_khz);
 
 #ifndef CONFIG_SMP
 	time_init_gtod();
@@ -1093,6 +1089,7 @@ static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ;
 static unsigned long PIE_count;
 
 static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */
+static unsigned int hpet_t1_cmp; /* cached comparator register */
 
 int is_hpet_enabled(void)
 {
@@ -1129,10 +1126,12 @@ int hpet_rtc_timer_init(void)
 	cnt = hpet_readl(HPET_COUNTER);
 	cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq);
 	hpet_writel(cnt, HPET_T1_CMP);
+	hpet_t1_cmp = cnt;
 	local_irq_restore(flags);
 
 	cfg = hpet_readl(HPET_T1_CFG);
-	cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
+	cfg &= ~HPET_TN_PERIODIC;
+	cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
 	hpet_writel(cfg, HPET_T1_CFG);
 
 	return 1;
@@ -1142,8 +1141,12 @@ static void hpet_rtc_timer_reinit(void)
 {
 	unsigned int cfg, cnt;
 
-	if (!(PIE_on | AIE_on | UIE_on))
+	if (unlikely(!(PIE_on | AIE_on | UIE_on))) {
+		cfg = hpet_readl(HPET_T1_CFG);
+		cfg &= ~HPET_TN_ENABLE;
+		hpet_writel(cfg, HPET_T1_CFG);
 		return;
+	}
 
 	if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
 		hpet_rtc_int_freq = PIE_freq;
@@ -1151,15 +1154,10 @@ static void hpet_rtc_timer_reinit(void)
 		hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
 
 	/* It is more accurate to use the comparator value than current count.*/
-	cnt = hpet_readl(HPET_T1_CMP);
+	cnt = hpet_t1_cmp;
 	cnt += hpet_tick*HZ/hpet_rtc_int_freq;
 	hpet_writel(cnt, HPET_T1_CMP);
-
-	cfg = hpet_readl(HPET_T1_CFG);
-	cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
-	hpet_writel(cfg, HPET_T1_CFG);
-
-	return;
+	hpet_t1_cmp = cnt;
 }
 
 /*
diff --git a/arch/x86_64/mm/ioremap.c b/arch/x86_64/mm/ioremap.c
index 6972df480d2b..ecf7acb5db9b 100644
--- a/arch/x86_64/mm/ioremap.c
+++ b/arch/x86_64/mm/ioremap.c
@@ -60,7 +60,7 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned lo
 	if (address >= end)
 		BUG();
 	do {
-		pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+		pte_t * pte = pte_alloc_kernel(pmd, address);
 		if (!pte)
 			return -ENOMEM;
 		remap_area_pte(pte, address, end - address, address + phys_addr, flags);
@@ -105,7 +105,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 	flush_cache_all();
 	if (address >= end)
 		BUG();
-	spin_lock(&init_mm.page_table_lock);
 	do {
 		pud_t *pud;
 		pud = pud_alloc(&init_mm, pgd, address);
@@ -119,7 +118,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr,
 		address = (address + PGDIR_SIZE) & PGDIR_MASK;
 		pgd++;
 	} while (address && (address < end));
-	spin_unlock(&init_mm.page_table_lock);
 	flush_tlb_all();
 	return error;
 }
diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c
index 84fde258cf85..1ff82268e8ea 100644
--- a/arch/xtensa/kernel/pci-dma.c
+++ b/arch/xtensa/kernel/pci-dma.c
@@ -29,7 +29,7 @@
  */
 
 void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp)
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
 {
 	void *ret;
 
diff --git a/arch/xtensa/kernel/platform.c b/arch/xtensa/kernel/platform.c
index 03674daabc66..a17930747f20 100644
--- a/arch/xtensa/kernel/platform.c
+++ b/arch/xtensa/kernel/platform.c
@@ -18,6 +18,7 @@
 #include <linux/time.h>
 #include <asm/platform.h>
 #include <asm/timex.h>
+#include <asm/param.h>		/* HZ */
 
 #define _F(r,f,a,b)							\
 	r __platform_##f a b;                                   	\
diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c
index 2659efdd4e99..14460743de07 100644
--- a/arch/xtensa/kernel/ptrace.c
+++ b/arch/xtensa/kernel/ptrace.c
@@ -45,7 +45,7 @@ void ptrace_disable(struct task_struct *child)
 	/* Nothing to do.. */
 }
 
-int sys_ptrace(long request, long pid, long addr, long data)
+long sys_ptrace(long request, long pid, long addr, long data)
 {
 	struct task_struct *child;
 	int ret = -EPERM;
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index 8e423d1335ce..cb6e38ed2b1d 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -29,9 +29,6 @@
 
 extern volatile unsigned long wall_jiffies;
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-EXPORT_SYMBOL(jiffies_64);
-
 spinlock_t rtc_lock = SPIN_LOCK_UNLOCKED;
 EXPORT_SYMBOL(rtc_lock);