diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/ppc/platforms/85xx/mpc8560_ads.c | 89 | ||||
| -rw-r--r-- | arch/ppc/platforms/85xx/mpc85xx_ads_common.h | 19 | ||||
| -rw-r--r-- | arch/ppc/platforms/mpc8272ads_setup.c | 154 | ||||
| -rw-r--r-- | arch/ppc/platforms/mpc866ads_setup.c | 192 | ||||
| -rw-r--r-- | arch/ppc/platforms/mpc885ads_setup.c | 175 | ||||
| -rw-r--r-- | arch/ppc/platforms/pq2ads_pd.h | 82 | ||||
| -rw-r--r-- | arch/ppc/syslib/mpc85xx_devices.c | 89 | ||||
| -rw-r--r-- | arch/ppc/syslib/mpc8xx_devices.c | 8 | ||||
| -rw-r--r-- | arch/ppc/syslib/mpc8xx_sys.c | 6 | ||||
| -rw-r--r-- | arch/ppc/syslib/pq2_devices.c | 5 | ||||
| -rw-r--r-- | arch/ppc/syslib/pq2_sys.c | 3 |
11 files changed, 460 insertions, 362 deletions
diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c index d90cd24d018e..94badafe4ef1 100644 --- a/arch/ppc/platforms/85xx/mpc8560_ads.c +++ b/arch/ppc/platforms/85xx/mpc8560_ads.c @@ -29,6 +29,7 @@ #include <linux/initrd.h> #include <linux/module.h> #include <linux/fsl_devices.h> +#include <linux/fs_enet_pd.h> #include <asm/system.h> #include <asm/pgtable.h> @@ -58,6 +59,71 @@ * Setup the architecture * */ +static void init_fcc_ioports(void) +{ + struct immap *immap; + struct io_port *io; + u32 tempval; + + immap = cpm2_immr; + + io = &immap->im_ioport; + /* FCC2/3 are on the ports B/C. */ + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB2_DIRB0; + tempval |= PB2_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB2_PSORB0; + tempval |= PB2_PSORB1; + out_be32(&io->iop_psorb, tempval); + + tempval = in_be32(&io->iop_pparb); + tempval |= (PB2_DIRB0 | PB2_DIRB1); + out_be32(&io->iop_pparb, tempval); + + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB3_DIRB0; + tempval |= PB3_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB3_PSORB0; + tempval |= PB3_PSORB1; + out_be32(&io->iop_psorb, tempval); + + tempval = in_be32(&io->iop_pparb); + tempval |= (PB3_DIRB0 | PB3_DIRB1); + out_be32(&io->iop_pparb, tempval); + + tempval = in_be32(&io->iop_pdirc); + tempval |= PC3_DIRC1; + out_be32(&io->iop_pdirc, tempval); + + tempval = in_be32(&io->iop_pparc); + tempval |= PC3_DIRC1; + out_be32(&io->iop_pparc, tempval); + + /* Port C has clocks...... */ + tempval = in_be32(&io->iop_psorc); + tempval &= ~(CLK_TRX); + out_be32(&io->iop_psorc, tempval); + + tempval = in_be32(&io->iop_pdirc); + tempval &= ~(CLK_TRX); + out_be32(&io->iop_pdirc, tempval); + tempval = in_be32(&io->iop_pparc); + tempval |= (CLK_TRX); + out_be32(&io->iop_pparc, tempval); + + /* Configure Serial Interface clock routing. + * First, clear all FCC bits to zero, + * then set the ones we want. + */ + immap->im_cpmux.cmx_fcr &= ~(CPMUX_CLK_MASK); + immap->im_cpmux.cmx_fcr |= CPMUX_CLK_ROUTE; +} static void __init mpc8560ads_setup_arch(void) @@ -66,6 +132,7 @@ mpc8560ads_setup_arch(void) unsigned int freq; struct gianfar_platform_data *pdata; struct gianfar_mdio_data *mdata; + struct fs_platform_info *fpi; cpm2_reset(); @@ -110,6 +177,28 @@ mpc8560ads_setup_arch(void) memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); } + init_fcc_ioports(); + ppc_sys_device_remove(MPC85xx_CPM_FCC1); + + fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC2); + if (fpi) { + memcpy(fpi->macaddr, binfo->bi_enet2addr, 6); + fpi->bus_id = "0:02"; + fpi->phy_addr = 2; + fpi->dpram_offset = (u32)cpm2_immr->im_dprambase; + fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[1]; + } + + fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC3); + if (fpi) { + memcpy(fpi->macaddr, binfo->bi_enet2addr, 6); + fpi->macaddr[5] += 1; + fpi->bus_id = "0:03"; + fpi->phy_addr = 3; + fpi->dpram_offset = (u32)cpm2_immr->im_dprambase; + fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[2]; + } + #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) ROOT_DEV = Root_RAM0; diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h index abf32281655d..c8c322fe3680 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h @@ -45,4 +45,23 @@ extern void mpc85xx_ads_map_io(void) __init; #define MPC85XX_PCI1_IO_SIZE 0x01000000 +/* FCC1 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK9-12 */ +#define F1_RXCLK 12 +#define F1_TXCLK 11 + +/* FCC2 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK13-16 */ +#define F2_RXCLK 13 +#define F2_TXCLK 14 + +/* FCC3 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK13-16 */ +#define F3_RXCLK 15 +#define F3_TXCLK 16 + + #endif /* __MACH_MPC85XX_ADS_H__ */ diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c index abb7154de2c7..2a35fe2b9b96 100644 --- a/arch/ppc/platforms/mpc8272ads_setup.c +++ b/arch/ppc/platforms/mpc8272ads_setup.c @@ -56,64 +56,51 @@ static struct fs_uart_platform_info mpc8272_uart_pdata[] = { }, }; -static struct fs_mii_bus_info mii_bus_info = { - .method = fsmii_bitbang, - .id = 0, - .i.bitbang = { - .mdio_port = fsiop_portc, - .mdio_bit = 18, - .mdc_port = fsiop_portc, - .mdc_bit = 19, - .delay = 1, - }, -}; - -static struct fs_platform_info mpc82xx_fcc1_pdata = { - .fs_no = fsid_fcc1, - .cp_page = CPM_CR_FCC1_PAGE, - .cp_block = CPM_CR_FCC1_SBLOCK, - .clk_trx = (PC_F1RXCLK | PC_F1TXCLK), - .clk_route = CMX1_CLK_ROUTE, - .clk_mask = CMX1_CLK_MASK, - .init_ioports = init_fcc1_ioports, - - .phy_addr = 0, -#ifdef PHY_INTERRUPT - .phy_irq = PHY_INTERRUPT, -#else - .phy_irq = -1; -#endif - .mem_offset = FCC1_MEM_OFFSET, - .bus_info = &mii_bus_info, - .rx_ring = 32, - .tx_ring = 32, - .rx_copybreak = 240, - .use_napi = 0, - .napi_weight = 17, +static struct fs_mii_bb_platform_info m82xx_mii_bb_pdata = { + .mdio_dat.bit = 18, + .mdio_dir.bit = 18, + .mdc_dat.bit = 19, + .delay = 1, }; -static struct fs_platform_info mpc82xx_fcc2_pdata = { - .fs_no = fsid_fcc2, - .cp_page = CPM_CR_FCC2_PAGE, - .cp_block = CPM_CR_FCC2_SBLOCK, - .clk_trx = (PC_F2RXCLK | PC_F2TXCLK), - .clk_route = CMX2_CLK_ROUTE, - .clk_mask = CMX2_CLK_MASK, - .init_ioports = init_fcc2_ioports, - - .phy_addr = 3, -#ifdef PHY_INTERRUPT - .phy_irq = PHY_INTERRUPT, -#else - .phy_irq = -1; -#endif - .mem_offset = FCC2_MEM_OFFSET, - .bus_info = &mii_bus_info, - .rx_ring = 32, - .tx_ring = 32, - .rx_copybreak = 240, - .use_napi = 0, - .napi_weight = 17, +static struct fs_platform_info mpc82xx_enet_pdata[] = { + [fsid_fcc1] = { + .fs_no = fsid_fcc1, + .cp_page = CPM_CR_FCC1_PAGE, + .cp_block = CPM_CR_FCC1_SBLOCK, + + .clk_trx = (PC_F1RXCLK | PC_F1TXCLK), + .clk_route = CMX1_CLK_ROUTE, + .clk_mask = CMX1_CLK_MASK, + .init_ioports = init_fcc1_ioports, + + .mem_offset = FCC1_MEM_OFFSET, + + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, + .bus_id = "0:00", + }, + [fsid_fcc2] = { + .fs_no = fsid_fcc2, + .cp_page = CPM_CR_FCC2_PAGE, + .cp_block = CPM_CR_FCC2_SBLOCK, + .clk_trx = (PC_F2RXCLK | PC_F2TXCLK), + .clk_route = CMX2_CLK_ROUTE, + .clk_mask = CMX2_CLK_MASK, + .init_ioports = init_fcc2_ioports, + + .mem_offset = FCC2_MEM_OFFSET, + + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, + .bus_id = "0:03", + }, }; static void init_fcc1_ioports(void) @@ -209,20 +196,21 @@ static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev, bd_t* bi = (void*)__res; int fs_no = fsid_fcc1+pdev->id-1; - mpc82xx_fcc1_pdata.dpram_offset = mpc82xx_fcc2_pdata.dpram_offset = (u32)cpm2_immr->im_dprambase; - mpc82xx_fcc1_pdata.fcc_regs_c = mpc82xx_fcc2_pdata.fcc_regs_c = (u32)cpm2_immr->im_fcc_c; - - switch(fs_no) { - case fsid_fcc1: - memcpy(&mpc82xx_fcc1_pdata.macaddr,bi->bi_enetaddr,6); - pdev->dev.platform_data = &mpc82xx_fcc1_pdata; - break; - case fsid_fcc2: - memcpy(&mpc82xx_fcc2_pdata.macaddr,bi->bi_enetaddr,6); - mpc82xx_fcc2_pdata.macaddr[5] ^= 1; - pdev->dev.platform_data = &mpc82xx_fcc2_pdata; - break; + if(fs_no > ARRAY_SIZE(mpc82xx_enet_pdata)) { + return; } + + mpc82xx_enet_pdata[fs_no].dpram_offset= + (u32)cpm2_immr->im_dprambase; + mpc82xx_enet_pdata[fs_no].fcc_regs_c = + (u32)cpm2_immr->im_fcc_c; + memcpy(&mpc82xx_enet_pdata[fs_no].macaddr,bi->bi_enetaddr,6); + + /* prevent dup mac */ + if(fs_no == fsid_fcc2) + mpc82xx_enet_pdata[fs_no].macaddr[5] ^= 1; + + pdev->dev.platform_data = &mpc82xx_enet_pdata[fs_no]; } static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev, @@ -274,6 +262,29 @@ static void init_scc4_uart_ioports(void) iounmap(immap); } +static void __init mpc8272ads_fixup_mdio_pdata(struct platform_device *pdev, + int idx) +{ + m82xx_mii_bb_pdata.irq[0] = PHY_INTERRUPT; + m82xx_mii_bb_pdata.irq[1] = -1; + m82xx_mii_bb_pdata.irq[2] = -1; + m82xx_mii_bb_pdata.irq[3] = PHY_INTERRUPT; + m82xx_mii_bb_pdata.irq[31] = -1; + + + m82xx_mii_bb_pdata.mdio_dat.offset = + (u32)&cpm2_immr->im_ioport.iop_pdatc; + + m82xx_mii_bb_pdata.mdio_dir.offset = + (u32)&cpm2_immr->im_ioport.iop_pdirc; + + m82xx_mii_bb_pdata.mdc_dat.offset = + (u32)&cpm2_immr->im_ioport.iop_pdatc; + + + pdev->dev.platform_data = &m82xx_mii_bb_pdata; +} + static int mpc8272ads_platform_notify(struct device *dev) { static const struct platform_notify_dev_map dev_map[] = { @@ -286,6 +297,10 @@ static int mpc8272ads_platform_notify(struct device *dev) .rtn = mpc8272ads_fixup_uart_pdata, }, { + .bus_id = "fsl-bb-mdio", + .rtn = mpc8272ads_fixup_mdio_pdata, + }, + { .bus_id = NULL } }; @@ -319,6 +334,7 @@ int __init mpc8272ads_init(void) ppc_sys_device_enable(MPC82xx_CPM_SCC4); #endif + ppc_sys_device_enable(MPC82xx_MDIO_BB); return 0; } diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c index f19b6167c770..e12cece4c9fd 100644 --- a/arch/ppc/platforms/mpc866ads_setup.c +++ b/arch/ppc/platforms/mpc866ads_setup.c @@ -1,10 +1,10 @@ -/*arch/ppc/platforms/mpc885ads-setup.c +/*arch/ppc/platforms/mpc866ads-setup.c * - * Platform setup for the Freescale mpc885ads board + * Platform setup for the Freescale mpc866ads board * * Vitaly Bordug <vbordug@ru.mvista.com> * - * Copyright 2005 MontaVista Software Inc. + * Copyright 2005-2006 MontaVista Software Inc. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -42,49 +42,36 @@ static void setup_scc1_ioports(void); static void setup_smc1_ioports(void); static void setup_smc2_ioports(void); -static struct fs_mii_bus_info fec_mii_bus_info = { - .method = fsmii_fec, - .id = 0, -}; - -static struct fs_mii_bus_info scc_mii_bus_info = { - .method = fsmii_fixed, - .id = 0, - .i.fixed.speed = 10, - .i.fixed.duplex = 0, -}; +static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata; -static struct fs_platform_info mpc8xx_fec_pdata[] = { - { - .rx_ring = 128, - .tx_ring = 16, - .rx_copybreak = 240, +static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata; - .use_napi = 1, - .napi_weight = 17, +static struct fs_platform_info mpc8xx_enet_pdata[] = { + [fsid_fec1] = { + .rx_ring = 128, + .tx_ring = 16, + .rx_copybreak = 240, - .phy_addr = 15, - .phy_irq = -1, + .use_napi = 1, + .napi_weight = 17, - .use_rmii = 0, + .init_ioports = setup_fec1_ioports, - .bus_info = &fec_mii_bus_info, - } -}; + .bus_id = "0:0f", + .has_phy = 1, + }, + [fsid_scc1] = { + .rx_ring = 64, + .tx_ring = 8, + .rx_copybreak = 240, + .use_napi = 1, + .napi_weight = 17, -static struct fs_platform_info mpc8xx_scc_pdata = { - .rx_ring = 64, - .tx_ring = 8, - .rx_copybreak = 240, - .use_napi = 1, - .napi_weight = 17, - - .phy_addr = -1, - .phy_irq = -1, - - .bus_info = &scc_mii_bus_info, + .init_ioports = setup_scc1_ioports, + .bus_id = "fixed@100:1", + }, }; static struct fs_uart_platform_info mpc866_uart_pdata[] = { @@ -207,63 +194,6 @@ static void setup_scc1_ioports(void) } -static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) -{ - struct fs_platform_info *fpi = pdev->dev.platform_data; - - volatile cpm8xx_t *cp; - bd_t *bd = (bd_t *) __res; - char *e; - int i; - - /* Get pointer to Communication Processor */ - cp = cpmp; - switch (fs_no) { - case fsid_fec1: - fpi = &mpc8xx_fec_pdata[0]; - fpi->init_ioports = &setup_fec1_ioports; - - break; - case fsid_scc1: - fpi = &mpc8xx_scc_pdata; - fpi->init_ioports = &setup_scc1_ioports; - - break; - default: - printk(KERN_WARNING"Device %s is not supported!\n", pdev->name); - return; - } - - pdev->dev.platform_data = fpi; - fpi->fs_no = fs_no; - - e = (unsigned char *)&bd->bi_enetaddr; - for (i = 0; i < 6; i++) - fpi->macaddr[i] = *e++; - - fpi->macaddr[5 - pdev->id]++; - -} - -static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev, - int idx) -{ - /* This is for FEC devices only */ - if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec"))) - return; - mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1); -} - -static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev, - int idx) -{ - /* This is for SCC devices only */ - if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc"))) - return; - - mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); -} - static void setup_smc1_ioports(void) { immap_t *immap = (immap_t *) IMAP_ADDR; @@ -315,6 +245,56 @@ static void setup_smc2_ioports(void) } +static int ma_count = 0; + +static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) +{ + struct fs_platform_info *fpi; + + volatile cpm8xx_t *cp; + bd_t *bd = (bd_t *) __res; + char *e; + int i; + + /* Get pointer to Communication Processor */ + cp = cpmp; + + if(fs_no > ARRAY_SIZE(mpc8xx_enet_pdata)) { + printk(KERN_ERR"No network-suitable #%d device on bus", fs_no); + return; + } + + + fpi = &mpc8xx_enet_pdata[fs_no]; + fpi->fs_no = fs_no; + pdev->dev.platform_data = fpi; + + e = (unsigned char *)&bd->bi_enetaddr; + for (i = 0; i < 6; i++) + fpi->macaddr[i] = *e++; + + fpi->macaddr[5] += ma_count++; +} + +static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev, + int idx) +{ + /* This is for FEC devices only */ + if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec"))) + return; + mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1); +} + +static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev, + int idx) +{ + /* This is for SCC devices only */ + if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc"))) + return; + + mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); +} + static void __init mpc866ads_fixup_uart_pdata(struct platform_device *pdev, int idx) { @@ -359,6 +339,9 @@ static int mpc866ads_platform_notify(struct device *dev) int __init mpc866ads_init(void) { + bd_t *bd = (bd_t *) __res; + struct fs_mii_fec_platform_info* fmpi; + printk(KERN_NOTICE "mpc866ads: Init\n"); platform_notify = mpc866ads_platform_notify; @@ -366,11 +349,20 @@ int __init mpc866ads_init(void) ppc_sys_device_initfunc(); ppc_sys_device_disable_all(); -#ifdef MPC8xx_SECOND_ETH_SCC1 +#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC1 ppc_sys_device_enable(MPC8xx_CPM_SCC1); #endif ppc_sys_device_enable(MPC8xx_CPM_FEC1); + ppc_sys_device_enable(MPC8xx_MDIO_FEC); + + fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data = + &mpc8xx_mdio_fec_pdata; + + fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1; + /* No PHY interrupt line here */ + fmpi->irq[0xf] = -1; + /* Since either of the uarts could be used as console, they need to ready */ #ifdef CONFIG_SERIAL_CPM_SMC1 ppc_sys_device_enable(MPC8xx_CPM_SMC1); @@ -381,6 +373,14 @@ int __init mpc866ads_init(void) ppc_sys_device_enable(MPC8xx_CPM_SMC2); ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART); #endif + ppc_sys_device_enable(MPC8xx_MDIO_FEC); + + fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data = + &mpc8xx_mdio_fec_pdata; + + fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1; + /* No PHY interrupt line here */ + fmpi->irq[0xf] = -1; return 0; } diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c index c1fc4a16fea9..5dfa4e6c2af0 100644 --- a/arch/ppc/platforms/mpc885ads_setup.c +++ b/arch/ppc/platforms/mpc885ads_setup.c @@ -38,7 +38,10 @@ extern unsigned char __res[]; static void setup_smc1_ioports(void); static void setup_smc2_ioports(void); -static void __init mpc885ads_scc_phy_init(char); +static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata; +static void setup_fec1_ioports(void); +static void setup_fec2_ioports(void); +static void setup_scc3_ioports(void); static struct fs_uart_platform_info mpc885_uart_pdata[] = { [fsid_smc1_uart] = { @@ -61,23 +64,8 @@ static struct fs_uart_platform_info mpc885_uart_pdata[] = { }, }; -static struct fs_mii_bus_info fec_mii_bus_info = { - .method = fsmii_fec, - .id = 0, -}; - -static struct fs_mii_bus_info scc_mii_bus_info = { -#ifdef CONFIG_SCC_ENET_8xx_FIXED - .method = fsmii_fixed, -#else - .method = fsmii_fec, -#endif - - .id = 0, -}; - -static struct fs_platform_info mpc8xx_fec_pdata[] = { - { +static struct fs_platform_info mpc8xx_enet_pdata[] = { + [fsid_fec1] = { .rx_ring = 128, .tx_ring = 16, .rx_copybreak = 240, @@ -85,11 +73,12 @@ static struct fs_platform_info mpc8xx_fec_pdata[] = { .use_napi = 1, .napi_weight = 17, - .phy_addr = 0, - .phy_irq = SIU_IRQ7, + .init_ioports = setup_fec1_ioports, - .bus_info = &fec_mii_bus_info, - }, { + .bus_id = "0:00", + .has_phy = 1, + }, + [fsid_fec2] = { .rx_ring = 128, .tx_ring = 16, .rx_copybreak = 240, @@ -97,35 +86,32 @@ static struct fs_platform_info mpc8xx_fec_pdata[] = { .use_napi = 1, .napi_weight = 17, - .phy_addr = 1, - .phy_irq = SIU_IRQ7, - - .bus_info = &fec_mii_bus_info, - } -}; + .init_ioports = setup_fec2_ioports, -static struct fs_platform_info mpc8xx_scc_pdata = { - .rx_ring = 64, - .tx_ring = 8, - .rx_copybreak = 240, + .bus_id = "0:01", + .has_phy = 1, + }, + [fsid_scc3] = { + .rx_ring = 64, + .tx_ring = 8, + .rx_copybreak = 240, - .use_napi = 1, - .napi_weight = 17, + .use_napi = 1, + .napi_weight = 17, - .phy_addr = 2, -#ifdef CONFIG_MPC8xx_SCC_ENET_FIXED - .phy_irq = -1, + .init_ioports = setup_scc3_ioports, +#ifdef CONFIG_FIXED_MII_10_FDX + .bus_id = "fixed@100:1", #else - .phy_irq = SIU_IRQ7, -#endif - - .bus_info = &scc_mii_bus_info, + .bus_id = "0:02", + #endif + }, }; void __init board_init(void) { - volatile cpm8xx_t *cp = cpmp; - unsigned int *bcsr_io; + cpm8xx_t *cp = cpmp; + unsigned int *bcsr_io; #ifdef CONFIG_FS_ENET immap_t *immap = (immap_t *) IMAP_ADDR; @@ -164,6 +150,14 @@ void __init board_init(void) /* use MDC for MII (common) */ setbits16(&immap->im_ioport.iop_pdpar, 0x0080); clrbits16(&immap->im_ioport.iop_pddir, 0x0080); + bcsr_io = ioremap(BCSR5, sizeof(unsigned long)); + clrbits32(bcsr_io,BCSR5_MII1_EN); + clrbits32(bcsr_io,BCSR5_MII1_RST); +#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 + clrbits32(bcsr_io,BCSR5_MII2_EN); + clrbits32(bcsr_io,BCSR5_MII2_RST); +#endif + iounmap(bcsr_io); #endif } @@ -194,8 +188,8 @@ static void setup_fec2_ioports(void) /* configure FEC2 pins */ setbits32(&immap->im_cpm.cp_pepar, 0x0003fffc); setbits32(&immap->im_cpm.cp_pedir, 0x0003fffc); - setbits32(&immap->im_cpm.cp_peso, 0x00037800); clrbits32(&immap->im_cpm.cp_peso, 0x000087fc); + setbits32(&immap->im_cpm.cp_peso, 0x00037800); clrbits32(&immap->im_cpm.cp_cptr, 0x00000080); } @@ -213,6 +207,8 @@ static void setup_scc3_ioports(void) /* Enable the PHY. */ + clrbits32(bcsr_io+4, BCSR4_ETH10_RST); + udelay(1000); setbits32(bcsr_io+4, BCSR4_ETH10_RST); /* Configure port A pins for Txd and Rxd. */ @@ -254,37 +250,38 @@ static void setup_scc3_ioports(void) clrbits32(&immap->im_cpm.cp_pedir, PE_ENET_TENA); setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA); - setbits32(bcsr_io+1, BCSR1_ETHEN); + setbits32(bcsr_io+4, BCSR1_ETHEN); iounmap(bcsr_io); } +static int mac_count = 0; + static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) { - struct fs_platform_info *fpi = pdev->dev.platform_data; - - volatile cpm8xx_t *cp; + struct fs_platform_info *fpi; bd_t *bd = (bd_t *) __res; char *e; int i; - /* Get pointer to Communication Processor */ - cp = cpmp; + if(fs_no > ARRAY_SIZE(mpc8xx_enet_pdata)) { + printk(KERN_ERR"No network-suitable #%d device on bus", fs_no); + return; + } + + fpi = &mpc8xx_enet_pdata[fs_no]; + switch (fs_no) { case fsid_fec1: - fpi = &mpc8xx_fec_pdata[0]; fpi->init_ioports = &setup_fec1_ioports; break; case fsid_fec2: - fpi = &mpc8xx_fec_pdata[1]; fpi->init_ioports = &setup_fec2_ioports; break; case fsid_scc3: - fpi = &mpc8xx_scc_pdata; fpi->init_ioports = &setup_scc3_ioports; - mpc885ads_scc_phy_init(fpi->phy_addr); break; default: - printk(KERN_WARNING"Device %s is not supported!\n", pdev->name); + printk(KERN_WARNING "Device %s is not supported!\n", pdev->name); return; } @@ -295,7 +292,7 @@ static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) for (i = 0; i < 6; i++) fpi->macaddr[i] = *e++; - fpi->macaddr[5 - pdev->id]++; + fpi->macaddr[5] += mac_count++; } @@ -318,58 +315,6 @@ static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev, mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); } -/* SCC ethernet controller does not have MII management channel. FEC1 MII - * channel is used to communicate with the 10Mbit PHY. - */ - -#define MII_ECNTRL_PINMUX 0x4 -#define FEC_ECNTRL_PINMUX 0x00000004 -#define FEC_RCNTRL_MII_MODE 0x00000004 - -/* Make MII read/write commands. - */ -#define mk_mii_write(REG, VAL, PHY_ADDR) (0x50020000 | (((REG) & 0x1f) << 18) | \ - ((VAL) & 0xffff) | ((PHY_ADDR) << 23)) - -static void mpc885ads_scc_phy_init(char phy_addr) -{ - volatile immap_t *immap; - volatile fec_t *fecp; - bd_t *bd; - - bd = (bd_t *) __res; - immap = (immap_t *) IMAP_ADDR; /* pointer to internal registers */ - fecp = &(immap->im_cpm.cp_fec); - - /* Enable MII pins of the FEC1 - */ - setbits16(&immap->im_ioport.iop_pdpar, 0x0080); - clrbits16(&immap->im_ioport.iop_pddir, 0x0080); - /* Set MII speed to 2.5 MHz - */ - out_be32(&fecp->fec_mii_speed, - ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1); - - /* Enable FEC pin MUX - */ - setbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX); - setbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE); - - out_be32(&fecp->fec_mii_data, - mk_mii_write(MII_BMCR, BMCR_ISOLATE, phy_addr)); - udelay(100); - out_be32(&fecp->fec_mii_data, - mk_mii_write(MII_ADVERTISE, - ADVERTISE_10HALF | ADVERTISE_CSMA, phy_addr)); - udelay(100); - - /* Disable FEC MII settings - */ - clrbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX); - clrbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE); - out_be32(&fecp->fec_mii_speed, 0); -} - static void setup_smc1_ioports(void) { immap_t *immap = (immap_t *) IMAP_ADDR; @@ -462,6 +407,9 @@ static int mpc885ads_platform_notify(struct device *dev) int __init mpc885ads_init(void) { + struct fs_mii_fec_platform_info* fmpi; + bd_t *bd = (bd_t *) __res; + printk(KERN_NOTICE "mpc885ads: Init\n"); platform_notify = mpc885ads_platform_notify; @@ -471,8 +419,17 @@ int __init mpc885ads_init(void) ppc_sys_device_enable(MPC8xx_CPM_FEC1); + ppc_sys_device_enable(MPC8xx_MDIO_FEC); + fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data = + &mpc8xx_mdio_fec_pdata; + + fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1; + + /* No PHY interrupt line here */ + fmpi->irq[0xf] = SIU_IRQ7; + #ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3 - ppc_sys_device_enable(MPC8xx_CPM_SCC1); + ppc_sys_device_enable(MPC8xx_CPM_SCC3); #endif #ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 diff --git a/arch/ppc/platforms/pq2ads_pd.h b/arch/ppc/platforms/pq2ads_pd.h index 8f14a43eafec..672483df8079 100644 --- a/arch/ppc/platforms/pq2ads_pd.h +++ b/arch/ppc/platforms/pq2ads_pd.h @@ -29,86 +29,4 @@ #define F3_RXCLK 13 #define F3_TXCLK 14 -/* Automatically generates register configurations */ -#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */ - -#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */ -#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */ -#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */ -#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */ -#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */ -#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */ - -#define PC_F1RXCLK PC_CLK(F1_RXCLK) -#define PC_F1TXCLK PC_CLK(F1_TXCLK) -#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK)) -#define CMX1_CLK_MASK ((uint)0xff000000) - -#define PC_F2RXCLK PC_CLK(F2_RXCLK) -#define PC_F2TXCLK PC_CLK(F2_TXCLK) -#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK)) -#define CMX2_CLK_MASK ((uint)0x00ff0000) - -#define PC_F3RXCLK PC_CLK(F3_RXCLK) -#define PC_F3TXCLK PC_CLK(F3_TXCLK) -#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK)) -#define CMX3_CLK_MASK ((uint)0x0000ff00) - -/* I/O Pin assignment for FCC1. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PA1_COL 0x00000001U -#define PA1_CRS 0x00000002U -#define PA1_TXER 0x00000004U -#define PA1_TXEN 0x00000008U -#define PA1_RXDV 0x00000010U -#define PA1_RXER 0x00000020U -#define PA1_TXDAT 0x00003c00U -#define PA1_RXDAT 0x0003c000U -#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT) -#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \ - PA1_RXDV | PA1_RXER) -#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV) -#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER) - - -/* I/O Pin assignment for FCC2. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PB2_TXER 0x00000001U -#define PB2_RXDV 0x00000002U -#define PB2_TXEN 0x00000004U -#define PB2_RXER 0x00000008U -#define PB2_COL 0x00000010U -#define PB2_CRS 0x00000020U -#define PB2_TXDAT 0x000003c0U -#define PB2_RXDAT 0x00003c00U -#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \ - PB2_RXER | PB2_RXDV | PB2_TXER) -#define PB2_PSORB1 (PB2_TXEN) -#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV) -#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER) - - -/* I/O Pin assignment for FCC3. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PB3_RXDV 0x00004000U -#define PB3_RXER 0x00008000U -#define PB3_TXER 0x00010000U -#define PB3_TXEN 0x00020000U -#define PB3_COL 0x00040000U -#define PB3_CRS 0x00080000U -#define PB3_TXDAT 0x0f000000U -#define PB3_RXDAT 0x00f00000U -#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \ - PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN) -#define PB3_PSORB1 0 -#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV) -#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER) - -#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) -#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) -#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) - #endif diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c index 7735336f5b8f..325136e5aee0 100644 --- a/arch/ppc/syslib/mpc85xx_devices.c +++ b/arch/ppc/syslib/mpc85xx_devices.c @@ -16,9 +16,11 @@ #include <linux/device.h> #include <linux/serial_8250.h> #include <linux/fsl_devices.h> +#include <linux/fs_enet_pd.h> #include <asm/mpc85xx.h> #include <asm/irq.h> #include <asm/ppc_sys.h> +#include <asm/cpm2.h> /* We use offsets for IORESOURCE_MEM since we do not know at compile time * what CCSRBAR is, will get fixed up by mach_mpc85xx_fixup @@ -82,6 +84,60 @@ static struct fsl_i2c_platform_data mpc85xx_fsl_i2c2_pdata = { .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR, }; +static struct fs_platform_info mpc85xx_fcc1_pdata = { + .fs_no = fsid_fcc1, + .cp_page = CPM_CR_FCC1_PAGE, + .cp_block = CPM_CR_FCC1_SBLOCK, + + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, + + .clk_mask = CMX1_CLK_MASK, + .clk_route = CMX1_CLK_ROUTE, + .clk_trx = (PC_F1RXCLK | PC_F1TXCLK), + + .mem_offset = FCC1_MEM_OFFSET, +}; + +static struct fs_platform_info mpc85xx_fcc2_pdata = { + .fs_no = fsid_fcc2, + .cp_page = CPM_CR_FCC2_PAGE, + .cp_block = CPM_CR_FCC2_SBLOCK, + + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, + + .clk_mask = CMX2_CLK_MASK, + .clk_route = CMX2_CLK_ROUTE, + .clk_trx = (PC_F2RXCLK | PC_F2TXCLK), + + .mem_offset = FCC2_MEM_OFFSET, +}; + +static struct fs_platform_info mpc85xx_fcc3_pdata = { + .fs_no = fsid_fcc3, + .cp_page = CPM_CR_FCC3_PAGE, + .cp_block = CPM_CR_FCC3_SBLOCK, + + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, + + .clk_mask = CMX3_CLK_MASK, + .clk_route = CMX3_CLK_ROUTE, + .clk_trx = (PC_F3RXCLK | PC_F3TXCLK), + + .mem_offset = FCC3_MEM_OFFSET, +}; + static struct plat_serial8250_port serial_platform_data[] = { [0] = { .mapbase = 0x4500, @@ -318,19 +374,28 @@ struct platform_device ppc_sys_platform_devices[] = { [MPC85xx_CPM_FCC1] = { .name = "fsl-cpm-fcc", .id = 1, - .num_resources = 3, + .num_resources = 4, + .dev.platform_data = &mpc85xx_fcc1_pdata, .resource = (struct resource[]) { { + .name = "fcc_regs", .start = 0x91300, .end = 0x9131F, .flags = IORESOURCE_MEM, }, { + .name = "fcc_regs_c", .start = 0x91380, .end = 0x9139F, .flags = IORESOURCE_MEM, }, { + .name = "fcc_pram", + .start = 0x88400, + .end = 0x884ff, + .flags = IORESOURCE_MEM, + }, + { .start = SIU_INT_FCC1, .end = SIU_INT_FCC1, .flags = IORESOURCE_IRQ, @@ -340,19 +405,28 @@ struct platform_device ppc_sys_platform_devices[] = { [MPC85xx_CPM_FCC2] = { .name = "fsl-cpm-fcc", .id = 2, - .num_resources = 3, + .num_resources = 4, + .dev.platform_data = &mpc85xx_fcc2_pdata, .resource = (struct resource[]) { { + .name = "fcc_regs", .start = 0x91320, .end = 0x9133F, .flags = IORESOURCE_MEM, }, { + .name = "fcc_regs_c", .start = 0x913A0, .end = 0x913CF, .flags = IORESOURCE_MEM, }, { + .name = "fcc_pram", + .start = 0x88500, + .end = 0x885ff, + .flags = IORESOURCE_MEM, + }, + { .start = SIU_INT_FCC2, .end = SIU_INT_FCC2, .flags = IORESOURCE_IRQ, @@ -362,19 +436,28 @@ struct platform_device ppc_sys_platform_devices[] = { [MPC85xx_CPM_FCC3] = { .name = "fsl-cpm-fcc", .id = 3, - .num_resources = 3, + .num_resources = 4, + .dev.platform_data = &mpc85xx_fcc3_pdata, .resource = (struct resource[]) { { + .name = "fcc_regs", .start = 0x91340, .end = 0x9135F, .flags = IORESOURCE_MEM, }, { + .name = "fcc_regs_c", .start = 0x913D0, .end = 0x913FF, .flags = IORESOURCE_MEM, }, { + .name = "fcc_pram", + .start = 0x88600, + .end = 0x886ff, + .flags = IORESOURCE_MEM, + }, + { .start = SIU_INT_FCC3, .end = SIU_INT_FCC3, .flags = IORESOURCE_IRQ, diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c index 6f536383866e..cf5ab47487a7 100644 --- a/arch/ppc/syslib/mpc8xx_devices.c +++ b/arch/ppc/syslib/mpc8xx_devices.c @@ -218,6 +218,14 @@ struct platform_device ppc_sys_platform_devices[] = { }, }, }, + + [MPC8xx_MDIO_FEC] = { + .name = "fsl-cpm-fec-mdio", + .id = 0, + .num_resources = 0, + + }, + }; static int __init mach_mpc8xx_fixup(struct platform_device *pdev) diff --git a/arch/ppc/syslib/mpc8xx_sys.c b/arch/ppc/syslib/mpc8xx_sys.c index eee213284855..18ba1d7ff9f1 100644 --- a/arch/ppc/syslib/mpc8xx_sys.c +++ b/arch/ppc/syslib/mpc8xx_sys.c @@ -22,7 +22,7 @@ struct ppc_sys_spec ppc_sys_specs[] = { .ppc_sys_name = "MPC86X", .mask = 0xFFFFFFFF, .value = 0x00000000, - .num_devices = 7, + .num_devices = 8, .device_list = (enum ppc_sys_devices[]) { MPC8xx_CPM_FEC1, @@ -32,13 +32,14 @@ struct ppc_sys_spec ppc_sys_specs[] = { MPC8xx_CPM_SCC4, MPC8xx_CPM_SMC1, MPC8xx_CPM_SMC2, + MPC8xx_MDIO_FEC, }, }, { .ppc_sys_name = "MPC885", .mask = 0xFFFFFFFF, .value = 0x00000000, - .num_devices = 8, + .num_devices = 9, .device_list = (enum ppc_sys_devices[]) { MPC8xx_CPM_FEC1, @@ -49,6 +50,7 @@ struct ppc_sys_spec ppc_sys_specs[] = { MPC8xx_CPM_SCC4, MPC8xx_CPM_SMC1, MPC8xx_CPM_SMC2, + MPC8xx_MDIO_FEC, }, }, { /* default match */ diff --git a/arch/ppc/syslib/pq2_devices.c b/arch/ppc/syslib/pq2_devices.c index 8692d00c08c4..fefbc217a56d 100644 --- a/arch/ppc/syslib/pq2_devices.c +++ b/arch/ppc/syslib/pq2_devices.c @@ -369,6 +369,11 @@ struct platform_device ppc_sys_platform_devices[] = { }, }, }, + [MPC82xx_MDIO_BB] = { + .name = "fsl-bb-mdio", + .id = 0, + .num_resources = 0, + }, }; static int __init mach_mpc82xx_fixup(struct platform_device *pdev) diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c index fee8948162b9..f52600c0db20 100644 --- a/arch/ppc/syslib/pq2_sys.c +++ b/arch/ppc/syslib/pq2_sys.c @@ -139,13 +139,14 @@ struct ppc_sys_spec ppc_sys_specs[] = { .ppc_sys_name = "8272", .mask = 0x0000ff00, .value = 0x00000c00, - .num_devices = 12, + .num_devices = 13, .device_list = (enum ppc_sys_devices[]) { MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4, MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1, + MPC82xx_MDIO_BB, }, }, /* below is a list of the 8280 family of processors */ |