diff options
Diffstat (limited to 'arch')
850 files changed, 29392 insertions, 12053 deletions
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h index 44545354e9e8..1d694c1ef6d6 100644 --- a/arch/arc/include/asm/processor.h +++ b/arch/arc/include/asm/processor.h @@ -57,11 +57,7 @@ struct task_struct; * A lot of busy-wait loops in SMP are based off of non-volatile data otherwise * get optimised away by gcc */ -#ifdef CONFIG_SMP #define cpu_relax() __asm__ __volatile__ ("" : : : "memory") -#else -#define cpu_relax() do { } while (0) -#endif #define cpu_relax_lowlatency() cpu_relax() diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S index 445e63a10754..cbfec79137bf 100644 --- a/arch/arc/kernel/entry-arcv2.S +++ b/arch/arc/kernel/entry-arcv2.S @@ -91,6 +91,25 @@ ENTRY(EV_DCError) flag 1 END(EV_DCError) +; --------------------------------------------- +; Memory Error Exception Handler +; - Unlike ARCompact, handles Bus errors for both User/Kernel mode, +; Instruction fetch or Data access, under a single Exception Vector +; --------------------------------------------- + +ENTRY(mem_service) + + EXCEPTION_PROLOGUE + + lr r0, [efa] + mov r1, sp + + FAKE_RET_FROM_EXCPN + + bl do_memory_error + b ret_from_exception +END(mem_service) + ENTRY(EV_Misaligned) EXCEPTION_PROLOGUE diff --git a/arch/arc/kernel/entry-compact.S b/arch/arc/kernel/entry-compact.S index 59f52035b4ea..431433929189 100644 --- a/arch/arc/kernel/entry-compact.S +++ b/arch/arc/kernel/entry-compact.S @@ -142,16 +142,12 @@ int1_saved_reg: .zero 4 /* Each Interrupt level needs its own scratch */ -#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS - ARCFP_DATA int2_saved_reg .type int2_saved_reg, @object .size int2_saved_reg, 4 int2_saved_reg: .zero 4 -#endif - ; --------------------------------------------- .section .text, "ax",@progbits @@ -216,6 +212,31 @@ END(handle_interrupt_level2) #endif ; --------------------------------------------- +; User Mode Memory Bus Error Interrupt Handler +; (Kernel mode memory errors handled via seperate exception vectors) +; --------------------------------------------- +ENTRY(mem_service) + + INTERRUPT_PROLOGUE 2 + + mov r0, ilink2 + mov r1, sp + + ; User process needs to be killed with SIGBUS, but first need to get + ; out of the L2 interrupt context (drop to pure kernel mode) and jump + ; off to "C" code where SIGBUS in enqueued + lr r3, [status32] + bclr r3, r3, STATUS_A2_BIT + or r3, r3, (STATUS_E1_MASK|STATUS_E2_MASK) + sr r3, [status32_l2] + mov ilink2, 1f + rtie +1: + bl do_memory_error + b ret_from_exception +END(mem_service) + +; --------------------------------------------- ; Level 1 ISR ; --------------------------------------------- ENTRY(handle_interrupt_level1) diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S index 589abf5172d6..2efb0625331d 100644 --- a/arch/arc/kernel/entry.S +++ b/arch/arc/kernel/entry.S @@ -93,23 +93,6 @@ ENTRY(instr_service) END(instr_service) ; --------------------------------------------- -; Memory Error Exception Handler -; --------------------------------------------- - -ENTRY(mem_service) - - EXCEPTION_PROLOGUE - - lr r0, [efa] - mov r1, sp - - FAKE_RET_FROM_EXCPN - - bl do_memory_error - b ret_from_exception -END(mem_service) - -; --------------------------------------------- ; Machine Check Exception Handler ; --------------------------------------------- diff --git a/arch/arc/lib/memcpy-archs.S b/arch/arc/lib/memcpy-archs.S index 0cab0b8a57c5..f96c75edf30a 100644 --- a/arch/arc/lib/memcpy-archs.S +++ b/arch/arc/lib/memcpy-archs.S @@ -50,26 +50,26 @@ ENTRY(memcpy) ;;; if size <= 8 cmp r2, 8 - bls.d @smallchunk + bls.d @.Lsmallchunk mov.f lp_count, r2 and.f r4, r0, 0x03 rsub lp_count, r4, 4 - lpnz @aligndestination + lpnz @.Laligndestination ;; LOOP BEGIN ldb.ab r5, [r1,1] sub r2, r2, 1 stb.ab r5, [r3,1] -aligndestination: +.Laligndestination: ;;; Check the alignment of the source and.f r4, r1, 0x03 - bnz.d @sourceunaligned + bnz.d @.Lsourceunaligned ;;; CASE 0: Both source and destination are 32bit aligned ;;; Convert len to Dwords, unfold x4 lsr.f lp_count, r2, ZOLSHFT - lpnz @copy32_64bytes + lpnz @.Lcopy32_64bytes ;; LOOP START LOADX (r6, r1) PREFETCH_READ (r1) @@ -81,25 +81,25 @@ aligndestination: STOREX (r8, r3) STOREX (r10, r3) STOREX (r4, r3) -copy32_64bytes: +.Lcopy32_64bytes: and.f lp_count, r2, ZOLAND ;Last remaining 31 bytes -smallchunk: - lpnz @copyremainingbytes +.Lsmallchunk: + lpnz @.Lcopyremainingbytes ;; LOOP START ldb.ab r5, [r1,1] stb.ab r5, [r3,1] -copyremainingbytes: +.Lcopyremainingbytes: j [blink] ;;; END CASE 0 -sourceunaligned: +.Lsourceunaligned: cmp r4, 2 - beq.d @unalignedOffby2 + beq.d @.LunalignedOffby2 sub r2, r2, 1 - bhi.d @unalignedOffby3 + bhi.d @.LunalignedOffby3 ldb.ab r5, [r1, 1] ;;; CASE 1: The source is unaligned, off by 1 @@ -114,7 +114,7 @@ sourceunaligned: or r5, r5, r6 ;; Both src and dst are aligned - lpnz @copy8bytes_1 + lpnz @.Lcopy8bytes_1 ;; LOOP START ld.ab r6, [r1, 4] prefetch [r1, 28] ;Prefetch the next read location @@ -131,7 +131,7 @@ sourceunaligned: st.ab r7, [r3, 4] st.ab r9, [r3, 4] -copy8bytes_1: +.Lcopy8bytes_1: ;; Write back the remaining 16bits EXTRACT_1 (r6, r5, 16) @@ -141,14 +141,14 @@ copy8bytes_1: stb.ab r5, [r3, 1] and.f lp_count, r2, 0x07 ;Last 8bytes - lpnz @copybytewise_1 + lpnz @.Lcopybytewise_1 ;; LOOP START ldb.ab r6, [r1,1] stb.ab r6, [r3,1] -copybytewise_1: +.Lcopybytewise_1: j [blink] -unalignedOffby2: +.LunalignedOffby2: ;;; CASE 2: The source is unaligned, off by 2 ldh.ab r5, [r1, 2] sub r2, r2, 1 @@ -159,7 +159,7 @@ unalignedOffby2: #ifdef __BIG_ENDIAN__ asl.nz r5, r5, 16 #endif - lpnz @copy8bytes_2 + lpnz @.Lcopy8bytes_2 ;; LOOP START ld.ab r6, [r1, 4] prefetch [r1, 28] ;Prefetch the next read location @@ -176,7 +176,7 @@ unalignedOffby2: st.ab r7, [r3, 4] st.ab r9, [r3, 4] -copy8bytes_2: +.Lcopy8bytes_2: #ifdef __BIG_ENDIAN__ lsr.nz r5, r5, 16 @@ -184,14 +184,14 @@ copy8bytes_2: sth.ab r5, [r3, 2] and.f lp_count, r2, 0x07 ;Last 8bytes - lpnz @copybytewise_2 + lpnz @.Lcopybytewise_2 ;; LOOP START ldb.ab r6, [r1,1] stb.ab r6, [r3,1] -copybytewise_2: +.Lcopybytewise_2: j [blink] -unalignedOffby3: +.LunalignedOffby3: ;;; CASE 3: The source is unaligned, off by 3 ;;; Hence, I need to read 1byte for achieve the 32bit alignment @@ -201,7 +201,7 @@ unalignedOffby3: #ifdef __BIG_ENDIAN__ asl.ne r5, r5, 24 #endif - lpnz @copy8bytes_3 + lpnz @.Lcopy8bytes_3 ;; LOOP START ld.ab r6, [r1, 4] prefetch [r1, 28] ;Prefetch the next read location @@ -218,7 +218,7 @@ unalignedOffby3: st.ab r7, [r3, 4] st.ab r9, [r3, 4] -copy8bytes_3: +.Lcopy8bytes_3: #ifdef __BIG_ENDIAN__ lsr.nz r5, r5, 24 @@ -226,11 +226,11 @@ copy8bytes_3: stb.ab r5, [r3, 1] and.f lp_count, r2, 0x07 ;Last 8bytes - lpnz @copybytewise_3 + lpnz @.Lcopybytewise_3 ;; LOOP START ldb.ab r6, [r1,1] stb.ab r6, [r3,1] -copybytewise_3: +.Lcopybytewise_3: j [blink] END(memcpy) diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S index 63860adc4814..f1967eeb32e7 100644 --- a/arch/arc/mm/tlbex.S +++ b/arch/arc/mm/tlbex.S @@ -88,7 +88,7 @@ ex_saved_reg1: #ifdef CONFIG_SMP sr r0, [ARC_REG_SCRATCH_DATA0] ; freeup r0 to code with GET_CPU_ID r0 ; get to per cpu scratch mem, - lsl r0, r0, L1_CACHE_SHIFT ; cache line wide per cpu + asl r0, r0, L1_CACHE_SHIFT ; cache line wide per cpu add r0, @ex_saved_reg1, r0 #else st r0, [@ex_saved_reg1] @@ -107,7 +107,7 @@ ex_saved_reg1: .macro TLBMISS_RESTORE_REGS #ifdef CONFIG_SMP GET_CPU_ID r0 ; get to per cpu scratch mem - lsl r0, r0, L1_CACHE_SHIFT ; each is cache line wide + asl r0, r0, L1_CACHE_SHIFT ; each is cache line wide add r0, @ex_saved_reg1, r0 ld_s r3, [r0,12] ld_s r2, [r0, 8] @@ -256,7 +256,7 @@ ex_saved_reg1: .macro CONV_PTE_TO_TLB and r3, r0, PTE_BITS_RWX ; r w x - lsl r2, r3, 3 ; Kr Kw Kx 0 0 0 (GLOBAL, kernel only) + asl r2, r3, 3 ; Kr Kw Kx 0 0 0 (GLOBAL, kernel only) and.f 0, r0, _PAGE_GLOBAL or.z r2, r2, r3 ; Kr Kw Kx Ur Uw Ux (!GLOBAL, user page) diff --git a/arch/arc/plat-sim/platform.c b/arch/arc/plat-sim/platform.c index dde692812bc1..e4fe51456808 100644 --- a/arch/arc/plat-sim/platform.c +++ b/arch/arc/plat-sim/platform.c @@ -10,7 +10,6 @@ #include <linux/init.h> #include <asm/mach_desc.h> -#include <asm/mcip.h> /*----------------------- Machine Descriptions ------------------------------ * diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f1ed1109f488..0365cbbc9179 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -621,28 +621,6 @@ config ARCH_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -config ARCH_SHMOBILE_LEGACY - bool "Renesas ARM SoCs (non-multiplatform)" - select ARCH_SHMOBILE - select ARM_PATCH_PHYS_VIRT if MMU - select CLKDEV_LOOKUP - select CPU_V7 - select GENERIC_CLOCKEVENTS - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 - select MULTI_IRQ_HANDLER - select NO_IOPORT_MAP - select PINCTRL - select PM_GENERIC_DOMAINS if PM - select SH_CLK_CPG - select SPARSE_IRQ - help - Support for Renesas ARM SoC platforms using a non-multiplatform - kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car - and RZ families. - config ARCH_RPC bool "RiscPC" depends on MMU @@ -737,7 +715,6 @@ config ARCH_DAVINCI select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select HAVE_IDE - select TI_PRIV_EDMA select USE_OF select ZONE_DMA help @@ -1538,7 +1515,6 @@ config HZ_FIXED default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \ ARCH_S5PV210 || ARCH_EXYNOS4 default 128 if SOC_AT91RM9200 - default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY default 0 choice @@ -1757,8 +1733,7 @@ config ARM_MODULE_PLTS source "mm/Kconfig" config FORCE_MAX_ZONEORDER - int "Maximum zone order" if ARCH_SHMOBILE_LEGACY - range 11 64 if ARCH_SHMOBILE_LEGACY + int "Maximum zone order" default "12" if SOC_AM33XX default "9" if SA1111 || ARCH_EFM32 default "11" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 0cfd7f947f6b..259c0ca9c99a 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -123,29 +123,23 @@ choice 0x80020000 | 0xf0020000 | UART8 0x80024000 | 0xf0024000 | UART9 - config AT91_DEBUG_LL_DBGU0 - bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10, 9rl, 9x5, 9n12" - select DEBUG_AT91_UART + config DEBUG_AT91_UART + bool "Kernel low-level debugging on Atmel SoCs" depends on ARCH_AT91 - depends on SOC_AT91RM9200 || SOC_AT91SAM9 + help + Say Y here if you want the debug print routines to direct + their output to the serial port on atmel devices. - config AT91_DEBUG_LL_DBGU1 - bool "Kernel low-level debugging on 9263, 9g45 and sama5d3" - select DEBUG_AT91_UART - depends on ARCH_AT91 - depends on SOC_AT91SAM9 || SOC_SAMA5 + SOC DEBUG_UART_PHYS DEBUG_UART_VIRT PORT + rm9200, 9260/9g20, 0xfffff200 0xfefff200 DBGU + 9261/9g10, 9rl + 9263, 9g45, sama5d3 0xffffee00 0xfeffee00 DBGU + sama5d4 0xfc00c000 0xfb00c000 USART3 + sama5d4 0xfc069000 0xfb069000 DBGU + sama5d2 0xf8020000 0xf7020000 UART1 - config AT91_DEBUG_LL_DBGU2 - bool "Kernel low-level debugging on sama5d4" - select DEBUG_AT91_UART - depends on ARCH_AT91 - depends on SOC_SAMA5 - - config AT91_DEBUG_LL_DBGU3 - bool "Kernel low-level debugging on sama5d2" - select DEBUG_AT91_UART - depends on ARCH_AT91 - depends on SOC_SAMA5 + Please adjust DEBUG_UART_PHYS configuration options based on + your needs. config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" @@ -1249,10 +1243,6 @@ choice endchoice -config DEBUG_AT91_UART - bool - depends on ARCH_AT91 - config DEBUG_EXYNOS_UART bool @@ -1485,7 +1475,8 @@ config DEBUG_UART_PHYS DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \ - DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 + DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ + DEBUG_AT91_UART config DEBUG_UART_VIRT hex "Virtual base address of debug UART" @@ -1621,8 +1612,7 @@ config DEBUG_UNCOMPRESS config UNCOMPRESS_INCLUDE string default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ - PLAT_SAMSUNG || ARM_SINGLE_ARMV7M || \ - ARCH_SHMOBILE_LEGACY + PLAT_SAMSUNG || ARM_SINGLE_ARMV7M default "mach/uncompress.h" config EARLY_PRINTK diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 6019f5d3ad7f..30bbc3746130 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -58,7 +58,9 @@ dtb-$(CONFIG_ARCH_AXXIA) += \ axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b.dtb \ - bcm2835-rpi-b-plus.dtb + bcm2835-rpi-b-rev2.dtb \ + bcm2835-rpi-b-plus.dtb \ + bcm2835-rpi-a-plus.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ bcm4708-asus-rt-ac68u.dtb \ @@ -72,6 +74,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47081-buffalo-wzr-900dhp.dtb \ bcm4709-asus-rt-ac87u.dtb \ bcm4709-buffalo-wxr-1900dhp.dtb \ + bcm4709-netgear-r7000.dtb \ bcm4709-netgear-r8000.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += \ bcm963138dvt.dtb @@ -83,6 +86,8 @@ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ dtb-$(CONFIG_ARCH_BCM_MOBILE) += \ bcm28155-ap.dtb \ bcm21664-garnet.dtb +dtb-$(CONFIG_ARCH_BCM_NSP) += \ + bcm958625k.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2-sony-nsz-gs7.dtb \ berlin2cd-google-chromecast.dtb \ @@ -115,6 +120,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ + exynos5250-snow-rev5.dtb \ exynos5250-spring.dtb \ exynos5260-xyref5260.dtb \ exynos5410-smdk5410.dtb \ @@ -123,6 +129,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5420-smdk5420.dtb \ exynos5422-odroidxu3.dtb \ exynos5422-odroidxu3-lite.dtb \ + exynos5422-odroidxu4.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb \ exynos5800-peach-pi.dtb @@ -227,6 +234,9 @@ dtb-$(CONFIG_ARCH_MMP) += \ pxa168-aspenite.dtb \ pxa910-dkb.dtb \ mmp2-brownstone.dtb +dtb-$(CONFIG_MACH_MESON8B) += \ + meson8b-mxq.dtb \ + meson8b-odroidc1.dtb dtb-$(CONFIG_ARCH_MOXART) += \ moxart-uc7112lx.dtb dtb-$(CONFIG_SOC_IMX1) += \ @@ -284,6 +294,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-gw551x.dtb \ imx6dl-gw552x.dtb \ imx6dl-hummingboard.dtb \ + imx6dl-nit6xlite.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-pbab01.dtb \ imx6dl-rex-basic.dtb \ @@ -313,6 +324,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw552x.dtb \ imx6q-hummingboard.dtb \ imx6q-nitrogen6x.dtb \ + imx6q-nitrogen6_max.dtb \ imx6q-phytec-pbab01.dtb \ imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ @@ -446,6 +458,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ + am335x-bonegreen.dtb \ am335x-sl50.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ @@ -470,6 +483,7 @@ dtb-$(CONFIG_SOC_AM43XX) += \ am437x-gp-evm.dtb dtb-$(CONFIG_SOC_OMAP5) += \ omap5-cm-t54.dtb \ + omap5-igep0050.dtb \ omap5-sbc-t54.dtb \ omap5-uevm.dtb dtb-$(CONFIG_SOC_DRA7XX) += \ @@ -506,7 +520,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-evb-rk808.dtb \ rk3288-firefly-beta.dtb \ rk3288-firefly.dtb \ + rk3288-popmetal.dtb \ rk3288-r89.dtb \ + rk3288-rock2-square.dtb \ + rk3288-veyron-jaq.dtb \ rk3288-veyron-jerry.dtb \ rk3288-veyron-minnie.dtb \ rk3288-veyron-pinky.dtb \ @@ -522,9 +539,6 @@ dtb-$(CONFIG_ARCH_S5PV210) += \ s5pv210-smdkc110.dtb \ s5pv210-smdkv210.dtb \ s5pv210-torbreck.dtb -dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \ - r8a7778-bockw.dtb \ - r8a7778-bockw-reference.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ @@ -535,6 +549,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ r8a7790-lager.dtb \ r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ + r8a7791-porter.dtb \ r8a7793-gose.dtb \ r8a7794-alt.dtb \ r8a7794-silk.dtb \ @@ -577,7 +592,9 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-gemei-g9.dtb \ sun4i-a10-hackberry.dtb \ sun4i-a10-hyundai-a7hd.dtb \ + sun4i-a10-inet1.dtb \ sun4i-a10-inet97fv2.dtb \ + sun4i-a10-inet9f-rev03.dtb \ sun4i-a10-itead-iteaduino-plus.dtb \ sun4i-a10-jesurun-q5.dtb \ sun4i-a10-marsboard.dtb \ @@ -585,16 +602,23 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-mk802.dtb \ sun4i-a10-mk802ii.dtb \ sun4i-a10-olinuxino-lime.dtb \ - sun4i-a10-pcduino.dtb + sun4i-a10-pcduino.dtb \ + sun4i-a10-pcduino2.dtb \ + sun4i-a10-pov-protab2-ips9.dtb dtb-$(CONFIG_MACH_SUN5I) += \ + sun5i-a10s-auxtek-t003.dtb \ sun5i-a10s-auxtek-t004.dtb \ sun5i-a10s-mk802.dtb \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ + sun5i-a10s-wobo-i5.dtb \ sun5i-a13-hsg-h702.dtb \ + sun5i-a13-inet-98v-rev2.dtb \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb \ - sun5i-a13-utoo-p66.dtb + sun5i-a13-q8-tablet.dtb \ + sun5i-a13-utoo-p66.dtb \ + sun5i-r8-chip.dtb dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-app4-evb1.dtb \ sun6i-a31-colombus.dtb \ @@ -602,7 +626,11 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-i7.dtb \ sun6i-a31-m9.dtb \ sun6i-a31-mele-a1000g-quad.dtb \ - sun6i-a31s-cs908.dtb + sun6i-a31s-cs908.dtb \ + sun6i-a31s-primo81.dtb \ + sun6i-a31s-sina31s.dtb \ + sun6i-a31s-sinovoip-bpi-m2.dtb \ + sun6i-a31s-yones-toptech-bs1078-v2.dtb dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-bananapi.dtb \ sun7i-a20-bananapro.dtb \ @@ -612,6 +640,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-m3.dtb \ sun7i-a20-mk808c.dtb \ + sun7i-a20-olimex-som-evb.dtb \ sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-micro.dtb \ @@ -619,14 +648,18 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-orangepi-mini.dtb \ sun7i-a20-pcduino3.dtb \ sun7i-a20-pcduino3-nano.dtb \ - sun7i-a20-wexler-tab7200.dtb + sun7i-a20-wexler-tab7200.dtb \ + sun7i-a20-wits-pro-a20-dkt.dtb dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-evb.dtb \ + sun8i-a23-gt90h-v4.dtb \ sun8i-a23-ippo-q8h-v5.dtb \ sun8i-a23-ippo-q8h-v1.2.dtb \ + sun8i-a23-q8-tablet.dtb \ sun8i-a33-et-q8-v1.6.dtb \ sun8i-a33-ga10h-v1.1.dtb \ sun8i-a33-ippo-q8h-v1.2.dtb \ + sun8i-a33-q8-tablet.dtb \ sun8i-a33-sinlinx-sina33.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ @@ -672,7 +705,9 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ph1-ld6b-ref.dtb \ uniphier-ph1-pro4-ref.dtb \ uniphier-ph1-sld3-ref.dtb \ - uniphier-ph1-sld8-ref.dtb + uniphier-ph1-sld8-ref.dtb \ + uniphier-proxstream2-gentil.dtb \ + uniphier-proxstream2-vodka.dtb dtb-$(CONFIG_ARCH_VERSATILE) += \ versatile-ab.dtb \ versatile-pb.dtb @@ -702,6 +737,10 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ armada-370-netgear-rn102.dtb \ armada-370-netgear-rn104.dtb \ armada-370-rd.dtb \ + armada-370-seagate-nas-2bay.dtb \ + armada-370-seagate-nas-4bay.dtb \ + armada-370-seagate-personal-cloud.dtb \ + armada-370-seagate-personal-cloud-2bay.dtb \ armada-370-synology-ds213j.dtb dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index 72a9b3fc4251..58a05f7d0b7c 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -46,39 +46,39 @@ &am33xx_pinmux { nxp_hdmi_pins: pinmux_nxp_hdmi_pins { pinctrl-single,pins = < - 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ - 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */ - 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */ - 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */ - 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */ - 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */ - 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */ - 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */ - 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */ - 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */ - 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */ - 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */ - 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */ - 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */ - 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */ - 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */ - 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */ - 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */ - 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */ - 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */ - 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */ + AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */ >; }; nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins { pinctrl-single,pins = < - 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ >; }; leds_base_pins: pinmux_leds_base_pins { pinctrl-single,pins = < - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - 0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */ + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_IOPAD(0x888, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index fec78349c1f3..5d370d54bd30 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -383,8 +383,7 @@ bus-width = <0x4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; &aes { diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts new file mode 100644 index 000000000000..0f65bdaaa583 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen.dts @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Green"; + compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + uart2_pins: uart2_pins { + pinctrl-single,pins = < + 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ + 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&rtc { + system-power-controller; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 1942a5c8132d..d9d00ab863a2 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -737,7 +737,7 @@ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; &mmc3 { diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 315bb02c9920..89442e98a837 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -647,7 +647,7 @@ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; &sham { diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index c0e1135256cc..54f113546ecc 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -56,41 +56,41 @@ &am33xx_pinmux { i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; nandflash_pins: pinmux_nandflash_pins { pinctrl-single,pins = < - 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ - 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; leds_pins: pinmux_leds_pins { pinctrl-single,pins = < - 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 5dd084f3c81c..2f43e458ea4a 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -29,8 +29,17 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - vbat: fixedregulator@0 { - compatible = "regulator-fixed"; + regulators { + compatible = "simple-bus"; + + vcc5v: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; }; }; @@ -233,14 +242,14 @@ #include "tps65910.dtsi" &tps { - vcc1-supply = <&vbat>; - vcc2-supply = <&vbat>; - vcc3-supply = <&vbat>; - vcc4-supply = <&vbat>; - vcc5-supply = <&vbat>; - vcc6-supply = <&vbat>; - vcc7-supply = <&vbat>; - vccio-supply = <&vbat>; + vcc1-supply = <&vcc5v>; + vcc2-supply = <&vcc5v>; + vcc3-supply = <&vcc5v>; + vcc4-supply = <&vcc5v>; + vcc5-supply = <&vcc5v>; + vcc6-supply = <&vcc5v>; + vcc7-supply = <&vcc5v>; + vccio-supply = <&vcc5v>; regulators { vrtc_reg: regulator@0 { @@ -311,13 +320,6 @@ }; }; -&vbat { - regulator-name = "vbat"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; -}; - /* SPI Busses */ &am33xx_pinmux { spi0_pins: pinmux_spi0 { diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index 5e541bd1b45a..2cecb3951e1b 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -11,6 +11,17 @@ model = "Phytec AM335x phyBOARD-WEGA"; compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"; + regulators { + compatible = "simple-bus"; + + vcc3v3: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; }; /* CAN Busses */ @@ -80,7 +91,7 @@ }; &mmc1 { - vmmc-supply = <&vmmc_reg>; + vmmc-supply = <&vcc3v3>; bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 22038f21f228..d2450ab0a380 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -304,6 +304,13 @@ >; }; + dcan0_sleep: dcan0_sleep_pins { + pinctrl-single,pins = < + 0x178 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */ + 0x17c (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */ + >; + }; + dcan1_default: dcan1_default_pins { pinctrl-single,pins = < 0x180 (PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */ @@ -311,6 +318,13 @@ >; }; + dcan1_sleep: dcan1_sleep_pins { + pinctrl-single,pins = < + 0x180 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */ + 0x184 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */ + >; + }; + vpfe0_pins_default: vpfe0_pins_default { pinctrl-single,pins = < 0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ @@ -581,8 +595,17 @@ attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + /* + * 0x264 represents the offset of padconf register of + * gpio3_22 from am43xx_pinmux base. + */ + interrupts-extended = <&gpio3 22 IRQ_TYPE_NONE>, + <&am43xx_pinmux 0x264>; + interrupt-names = "tsc", "wakeup"; + touchscreen-size-x = <1024>; touchscreen-size-y = <600>; + wakeup-source; }; ov2659@30 { @@ -689,7 +712,7 @@ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; /* eMMC sits on mmc2 */ @@ -886,14 +909,16 @@ }; &dcan0 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&dcan0_default>; + pinctrl-1 = <&dcan0_sleep>; status = "okay"; }; &dcan1 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&dcan1_default>; + pinctrl-1 = <&dcan1_sleep>; status = "okay"; }; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index af25801418b4..337fb91ee74c 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -325,7 +325,7 @@ pinctrl-1 = <&mmc1_pins_sleep>; vmmc-supply = <&v3_3d>; bus-width = <4>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; &qspi { diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 0bb36e9af936..63de2a1b4315 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -563,7 +563,7 @@ vmmc-supply = <&dcdc4>; bus-width = <4>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; &usb2_phy1 { diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 86c2dfbe8875..47954ed990f8 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -376,7 +376,7 @@ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; &mac { diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index d55e3ea89fda..d9ba6b879fc1 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -35,6 +35,14 @@ regulator-max-microvolt = <3300000>; }; + aic_dvdd: fixedregulator-aic_dvdd { + compatible = "regulator-fixed"; + regulator-name = "aic_dvdd_fixed"; + vin-supply = <&vdd_3v3>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vtt_fixed: fixedregulator-vtt { /* TPS51200 */ compatible = "regulator-fixed"; @@ -142,6 +150,32 @@ }; }; }; + + sound0: sound@0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "BeagleBoard-X15"; + simple-audio-card,widgets = + "Line", "Line Out", + "Line", "Line In"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "MIC2L", "Line In", + "MIC2R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp3>; + }; + + sound0_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3104>; + clocks = <&clkout2_clk>; + }; + }; }; &dra7_pmx_core { @@ -326,6 +360,36 @@ 0x370 (PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */ >; }; + + clkout2_pins_default: clkout2_pins_default { + pinctrl-single,pins = < + 0x294 (PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */ + >; + }; + + clkout2_pins_sleep: clkout2_pins_sleep { + pinctrl-single,pins = < + 0x294 (PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */ + >; + }; + + mcasp3_pins_default: mcasp3_pins_default { + pinctrl-single,pins = < + 0x324 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */ + 0x328 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */ + 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */ + 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */ + >; + }; + + mcasp3_pins_sleep: mcasp3_pins_sleep { + pinctrl-single,pins = < + 0x324 (PIN_INPUT | MUX_MODE15) + 0x328 (PIN_INPUT | MUX_MODE15) + 0x32c (PIN_INPUT | MUX_MODE15) + 0x330 (PIN_INPUT | MUX_MODE15) + >; + }; }; &i2c1 { @@ -511,6 +575,22 @@ interrupts = <16 IRQ_TYPE_LEVEL_LOW>; #thermal-sensor-cells = <1>; }; + + tlv320aic3104: tlv320aic3104@18 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3104"; + reg = <0x18>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&clkout2_pins_default>; + pinctrl-1 = <&clkout2_pins_sleep>; + status = "okay"; + adc-settle-ms = <40>; + + AVDD-supply = <&vdd_3v3>; + IOVDD-supply = <&vdd_3v3>; + DRVDD-supply = <&vdd_3v3>; + DVDD-supply = <&aic_dvdd>; + }; }; &i2c3 { @@ -586,7 +666,7 @@ vmmc-supply = <&ldo1_reg>; bus-width = <4>; - cd-gpios = <&gpio6 27 0>; /* gpio 219 */ + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ }; &mmc2 { @@ -709,3 +789,38 @@ &pcie1 { gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; }; + +&mcasp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp3_pins_default>; + pinctrl-1 = <&mcasp3_pins_sleep>; + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 03542f7b5b94..bb280de511da 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -74,7 +74,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; internal-regs { serial@12000 { diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts index af4dc548c1c0..e2a363b1dd8a 100644 --- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts +++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts @@ -69,7 +69,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 - MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 0f40d5da28c3..3aa980ad64f0 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -61,7 +61,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 - MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; pcie-controller { status = "okay"; @@ -138,6 +139,10 @@ phy-mode = "rgmii-id"; }; + crypto@90000 { + status = "okay"; + }; + mvsdio@d4000 { pinctrl-0 = <&sdio_pins3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index a31207860f34..5555875f44f9 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -63,7 +63,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 - MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; pcie-controller { status = "okay"; @@ -82,6 +83,12 @@ }; internal-regs { + + /* RTC is provided by Intersil ISL12057 I2C RTC chip */ + rtc@10300 { + status = "disabled"; + }; + serial@12000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 00540f292979..78b563c02f3c 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -63,7 +63,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 - MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; pcie-controller { status = "okay"; @@ -82,6 +83,12 @@ }; internal-regs { + + /* RTC is provided by Intersil ISL12057 I2C RTC chip */ + rtc@10300 { + status = "disabled"; + }; + serial@12000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 19475e68b8e9..fbef730e8d37 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -74,7 +74,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts new file mode 100644 index 000000000000..fef0110a8d8a --- /dev/null +++ b/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts @@ -0,0 +1,36 @@ +/* + * Device Tree file for Seagate NAS 2-Bay (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Vincent Donnefort <vdonnefort@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * Here are some information allowing to identify the device: + * + * Product name : Seagate NAS 2-Bay + * Code name (board/PCB) : Dart 2-Bay + * Model name (case sticker) : SRPD20 + * Material desc (product spec) : STCTxxxxxxx + */ + +/dts-v1/; +#include "armada-370-seagate-nas-xbay.dtsi" + +/ { + model = "Seagate NAS 2-Bay (Dart, SRPD20)"; + compatible = "seagate,dart-2", "marvell,armada370", "marvell,armada-370-xp"; + + gpio-fan { + gpio-fan,speed-map = + < 0 3 + 950 2 + 1400 1 + 1800 0>; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts new file mode 100644 index 000000000000..ae2e1fe50ef6 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts @@ -0,0 +1,133 @@ +/* + * Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Vincent Donnefort <vdonnefort@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * Here are some information allowing to identify the device: + * + * Product name : Seagate NAS 4-Bay + * Code name (board/PCB) : Dart 4-Bay + * Model name (case sticker) : SRPD40 + * Material desc (product spec) : STCUxxxxxxx + */ + +/dts-v1/; +#include "armada-370-seagate-nas-xbay.dtsi" +#include <dt-bindings/leds/leds-ns2.h> + +/ { + model = "Seagate NAS 4-Bay (Dart, SRPD40)"; + compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp"; + + soc { + pcie-controller { + /* SATA AHCI controller 88SE9170 */ + pcie@1,0 { + status = "okay"; + }; + }; + + internal-regs { + mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + ethernet@74000 { + status = "okay"; + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + i2c@11000 { + /* I2C GPIO expander (PCA9554A) */ + pca9554: pca9554@21 { + compatible = "nxp,pca9554"; + reg = <0x21>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + }; + }; + + regulators { + regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "SATA2 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>; + }; + regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "SATA3 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-leds { + red-sata2 { + label = "dart:red:sata2"; + gpios = <&pca9554 0 GPIO_ACTIVE_LOW>; + }; + red-sata3 { + label = "dart:red:sata3"; + gpios = <&pca9554 3 GPIO_ACTIVE_LOW>; + }; + }; + + leds-ns2 { + compatible = "lacie,ns2-leds"; + + white-sata2 { + label = "dart:white:sata2"; + cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>; + slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>; + num-modes = <4>; + modes-map = <NS_V2_LED_SATA 0 0 + NS_V2_LED_OFF 0 1 + NS_V2_LED_ON 1 0 + NS_V2_LED_ON 1 1>; + }; + white-sata3 { + label = "dart:white:sata3"; + cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>; + slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>; + num-modes = <4>; + modes-map = <NS_V2_LED_SATA 0 0 + NS_V2_LED_OFF 0 1 + NS_V2_LED_ON 1 0 + NS_V2_LED_ON 1 1>; + }; + }; + + gpio-fan { + gpio-fan,speed-map = + < 0 3 + 800 2 + 1050 1 + 1300 0>; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi new file mode 100644 index 000000000000..3036e25c5992 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi @@ -0,0 +1,231 @@ +/* + * Device Tree common file for the Seagate NAS 2 and 4-bay (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Vincent Donnefort <vdonnefort@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * TODO: add support for the white SATA LEDs associated with HDD 0 and 1. + */ + +#include "armada-370.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* USB 3.0 bridge ASM1042A */ + pcie@2,0 { + status = "okay"; + }; + }; + + internal-regs { + serial@12000 { + status = "okay"; + }; + + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + + mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ethernet@70000 { + status = "okay"; + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + i2c@11000 { + status = "okay"; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + clock-frequency = <100000>; + + /* RTC - NXP 8563T (second source) */ + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + interrupts = <110>; + }; + /* RTC - MCP7940NT */ + rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + interrupts = <110>; + }; + }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x300000>; + }; + partition@300000 { + label = "device-tree"; + reg = <0x300000 0x20000>; + }; + partition@320000 { + label = "linux"; + reg = <0x320000 0x2000000>; + }; + partition@2320000 { + label = "rootfs"; + reg = <0x2320000 0xdce0000>; + }; + }; + }; + + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA0 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; + }; + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA1 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio2 0 GPIO_ACTIVE_HIGH + &gpio2 1 GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power button"; + linux,code = <KEY_POWER>; + gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + debounce-interval = <100>; + }; + button@2 { + label = "Backup button"; + linux,code = <KEY_OPTION>; + gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; + debounce-interval = <100>; + }; + button@3 { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + debounce-interval = <100>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + white-power { + label = "dart:white:power"; + gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + + }; + red-power { + label = "dart:red:power"; + gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; + }; + red-sata0 { + label = "dart:red:sata0"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + red-sata1 { + label = "dart:red:sata1"; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>; + pinctrl-names = "default"; + + hdd0_led_sata_pin: hdd0-led-sata-pin { + marvell,pins = "mpp48"; + marvell,function = "sata1"; + }; + hdd0_led_gpio_pin: hdd0-led-gpio-pin { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + hdd1_led_sata_pin: hdd1-led-sata-pin { + marvell,pins = "mpp57"; + marvell,function = "sata0"; + }; + hdd1_led_gpio_pin: hdd1-led-gpio-pin { + marvell,pins = "mpp57"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts new file mode 100644 index 000000000000..3c91f9821c89 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts @@ -0,0 +1,51 @@ +/* + * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Simon Guinot <simon.guinot@sequanux.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * Here are some information allowing to identify the device: + * + * Product name : Seagate Personal Cloud 2-Bay + * Code name (board/PCB) : Cumulus Max + * Model name (case sticker) : SRN22C + * Material desc (product spec) : STCSxxxxxxx + */ + +/dts-v1/; +#include "armada-370-seagate-personal-cloud.dtsi" + +/ { + model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)"; + compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp"; + + soc { + internal-regs { + sata@a0000 { + status = "okay"; + nr-ports = <2>; + }; + }; + }; + + regulators { + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA1 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts new file mode 100644 index 000000000000..aad39e97af43 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts @@ -0,0 +1,37 @@ +/* + * Device Tree file for Seagate Personal Cloud NAS (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Simon Guinot <simon.guinot@sequanux.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * Here are some information allowing to identify the device: + * + * Product name : Seagate Personal Cloud + * Code name (board/PCB) : Cumulus + * Model name (case sticker) : SRN21C + * Material desc (product spec) : STCRxxxxxxx + */ + +/dts-v1/; +#include "armada-370-seagate-personal-cloud.dtsi" + +/ { + model = "Seagate Personal Cloud (Cumulus, SRN21C)"; + compatible = "seagate,cumulus", "marvell,armada370", "marvell,armada-370-xp"; + + soc { + internal-regs { + sata@a0000 { + status = "okay"; + nr-ports = <1>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi new file mode 100644 index 000000000000..1aba08e4377c --- /dev/null +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi @@ -0,0 +1,178 @@ +/* + * Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay + * (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Simon Guinot <simon.guinot@sequanux.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * TODO: add support for the white SATA LED. + */ + +#include "armada-370.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* USB 3.0 Bridge ASM1042A */ + pcie@1,0 { + status = "okay"; + }; + }; + + internal-regs { + coherency-fabric@20200 { + broken-idle; + }; + + serial@12000 { + status = "okay"; + }; + + mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ethernet@74000 { + status = "okay"; + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + spi@10600 { + status = "okay"; + pinctrl-0 = <&spi0_pins2>; + pinctrl-names = "default"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + /* MX25L8006E */ + compatible = "mxicy,mx25l8005", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + }; + }; + }; + + usb@50000 { + status = "okay"; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 27 GPIO_ACTIVE_LOW>; + }; + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA0 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power button"; + linux,code = <KEY_POWER>; + gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + debounce-interval = <100>; + }; + button@2 { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + debounce-interval = <100>; + }; + button@3 { + label = "USB VBUS error"; + linux,code = <KEY_UNKNOWN>; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + debounce-interval = <100>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + red-sata0 { + label = "cumulus:red:sata0"; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + }; +}; + +&pinctrl { + pinctrl-0 = <&sata_led_pin>; + pinctrl-names = "default"; + + sata_led_pin: sata-led-pin { + marvell,pins = "mpp60"; + marvell,function = "sata0"; + }; + gpio_led_pin: gpio-led-pin { + marvell,pins = "mpp60"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 4f4924362bf0..836bcc07afc5 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -77,7 +77,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; internal-regs { diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 53a1a5abe147..3b06aa835448 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -256,6 +256,11 @@ reg = <0x20800 0x8>; }; + cpu-config@21000 { + compatible = "marvell,armada-370-cpu-config"; + reg = <0x21000 0x8>; + }; + audio_controller: audio-controller@30000 { #sound-dai-cells = <1>; compatible = "marvell,armada370-audio"; @@ -319,6 +324,38 @@ ethernet@74000 { compatible = "marvell,armada-370-neta"; }; + + crypto@90000 { + compatible = "marvell,armada-370-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <48>; + clocks = <&gateclk 23>; + clock-names = "cesa0"; + marvell,crypto-srams = <&crypto_sram>; + marvell,crypto-sram-size = <0x7e0>; + }; + }; + + crypto_sram: sa-sram { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x01) 0 0x800>; + reg-names = "sram"; + clocks = <&gateclk 23>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x01) 0 0x800>; + + /* + * The Armada 370 has an erratum preventing the use of + * the standard workflow for CPU idle support (relying + * on the BootROM code to enter/exit idle state). + * Reserve some amount of the crypto SRAM to put the + * cpuidle workaround. + */ + idle-sram@0 { + reg = <0x0 0x20>; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 5711b97e876c..cded5f0a262d 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -65,7 +65,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>; internal-regs { spi@10600 { diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index e9a381741ce1..7ccce7529b0c 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -513,6 +513,21 @@ }; }; + crypto@90000 { + compatible = "marvell,armada-375-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 30>, <&gateclk 31>, + <&gateclk 28>, <&gateclk 29>; + clock-names = "cesa0", "cesa1", + "cesaz0", "cesaz1"; + marvell,crypto-srams = <&crypto_sram0>, + <&crypto_sram1>; + marvell,crypto-sram-size = <0x800>; + }; + sata@a0000 { compatible = "marvell,orion-sata"; reg = <0xa0000 0x5000>; @@ -619,5 +634,23 @@ }; }; + + crypto_sram0: sa-sram0 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x09) 0 0x800>; + clocks = <&gateclk 30>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>; + }; + + crypto_sram1: sa-sram1 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x05) 0 0x800>; + clocks = <&gateclk 31>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>; + }; }; }; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 4047621b137e..acd5b1519edb 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -59,7 +59,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; internal-regs { spi1: spi@10680 { diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 74a9c6b54fa7..3710755c6d76 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -57,7 +57,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>; internal-regs { diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index 91ac8c118f37..ff47af57f091 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -64,7 +64,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; internal-regs { spi@10600 { diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index 353c92532e7a..a633be3defda 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -58,7 +58,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; internal-regs { spi@10600 { @@ -205,8 +207,21 @@ sdhci@d8000 { pinctrl-names = "default"; pinctrl-0 = <&sdhci_pins>; - cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>; no-1-8-v; + /* + * A388-GP board v1.5 and higher replace + * hitherto card detection method based on GPIO + * with the one using DAT3 pin. As they are + * incompatible, software-based polling is + * enabled with 'broken-cd' property. For boards + * older than v1.5 it can be replaced with: + * 'cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;', + * whereas for the newer ones following can be + * used instead: + * 'dat3-cd;' + * 'cd-inverted;' + */ + broken-cd; wp-inverted; bus-width = <8>; status = "okay"; diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts index b657b1687e5f..853f9735cc70 100644 --- a/arch/arm/boot/dts/armada-388-rd.dts +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -65,7 +65,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; internal-regs { spi@10600 { diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index f9f2347d9995..c6a0e9d7f1a9 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -509,6 +509,21 @@ clocks = <&gateclk 4>; }; + crypto@90000 { + compatible = "marvell,armada-38x-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 23>, <&gateclk 21>, + <&gateclk 14>, <&gateclk 16>; + clock-names = "cesa0", "cesa1", + "cesaz0", "cesaz1"; + marvell,crypto-srams = <&crypto_sram0>, + <&crypto_sram1>; + marvell,crypto-sram-size = <0x800>; + }; + rtc@a3800 { compatible = "marvell,armada-380-rtc"; reg = <0xa3800 0x20>, <0x184a0 0x0c>; @@ -584,6 +599,24 @@ status = "disabled"; }; }; + + crypto_sram0: sa-sram0 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x19) 0 0x800>; + clocks = <&gateclk 23>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>; + }; + + crypto_sram1: sa-sram1 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x15) 0 0x800>; + clocks = <&gateclk 21>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>; + }; }; clocks { diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index 60bbfe32bb80..23fc670c0427 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -69,7 +69,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 7dd900f158be..f774101416a5 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -75,7 +75,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>; + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; devbus-bootcs { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index bf724ca96a33..4878d7353069 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -94,7 +94,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>; + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; devbus-bootcs { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 06a6a6c1fdf7..58b500873bfd 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -64,7 +64,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index fdd187c55aa5..6e9820e141f8 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -69,7 +69,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index f894bc83e957..6ab33837a2b6 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -67,7 +67,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; internal-regs { serial@12000 { diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index 1516fc2627f9..6fe8972de0a2 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -63,7 +63,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; pcie-controller { status = "okay"; @@ -88,41 +90,10 @@ }; internal-regs { - /* Two rear eSATA ports */ - sata@a0000 { - nr-ports = <2>; - status = "okay"; - }; - - serial@12000 { - status = "okay"; - }; - - mdio { - phy0: ethernet-phy@0 { /* Marvell 88E1318 */ - reg = <0>; - }; - - phy1: ethernet-phy@1 { /* Marvell 88E1318 */ - reg = <1>; - }; - }; - - ethernet@70000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - ethernet@74000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - - /* Front USB 2.0 port */ - usb@50000 { - status = "okay"; + /* RTC is provided by Intersil ISL12057 I2C RTC chip */ + rtc@10300 { + status = "disabled"; }; i2c@11000 { @@ -130,12 +101,6 @@ clock-frequency = <400000>; status = "okay"; - isl12057: isl12057@68 { - compatible = "isil,isl12057"; - reg = <0x68>; - isil,irq2-can-wakeup-machine; - }; - /* Controller for rear fan #1 of 3 (Protechnic * MGT4012XB-O20, 8000RPM) near eSATA port */ g762_fan1: g762@3e { @@ -172,6 +137,49 @@ compatible = "gmt,g751"; reg = <0x4c>; }; + + isl12057: isl12057@68 { + compatible = "isil,isl12057"; + reg = <0x68>; + isil,irq2-can-wakeup-machine; + }; + }; + + serial@12000 { + status = "okay"; + }; + + /* Front USB 2.0 port */ + usb@50000 { + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + }; + + phy1: ethernet-phy@1 { /* Marvell 88E1318 */ + reg = <1>; + }; + }; + + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + /* Two rear eSATA ports */ + sata@a0000 { + nr-ports = <2>; + status = "okay"; }; nand@d0000 { diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 990e8a2100f0..a5db17782e08 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -65,7 +65,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>; + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; devbus-bootcs { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index 20267ad2f61e..2391b11dc546 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -77,7 +77,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 3de9b761cc1a..be23196829bb 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -184,6 +184,11 @@ reg = <0x20800 0x20>; }; + cpu-config@21000 { + compatible = "marvell,armada-xp-cpu-config"; + reg = <0x21000 0x8>; + }; + eth2: ethernet@30000 { compatible = "marvell,armada-xp-neta"; reg = <0x30000 0x4000>; @@ -236,6 +241,18 @@ compatible = "marvell,armada-xp-neta"; }; + crypto@90000 { + compatible = "marvell,armada-xp-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <48>, <49>; + clocks = <&gateclk 23>, <&gateclk 23>; + clock-names = "cesa0", "cesa1"; + marvell,crypto-srams = <&crypto_sram0>, + <&crypto_sram1>; + marvell,crypto-sram-size = <0x800>; + }; + xor@f0900 { compatible = "marvell,orion-xor"; reg = <0xF0900 0x100 @@ -256,6 +273,24 @@ }; }; }; + + crypto_sram0: sa-sram0 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x09) 0 0x800>; + clocks = <&gateclk 23>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>; + }; + + crypto_sram1: sa-sram1 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x05) 0 0x800>; + clocks = <&gateclk 23>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>; + }; }; clocks { diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index e8d63afdb135..e07c2b206beb 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -44,6 +44,7 @@ */ /dts-v1/; #include "sama5d2.dtsi" +#include "sama5d2-pinfunc.h" / { model = "Atmel SAMA5D2 Xplained"; @@ -92,6 +93,8 @@ apb { spi0: spi@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0_default>; status = "okay"; m25p80@0 { @@ -102,25 +105,92 @@ }; macb0: ethernet@f8008000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_default>; phy-mode = "rmii"; status = "okay"; }; uart1: serial@f8020000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; status = "okay"; }; i2c0: i2c@f8028000 { dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; status = "okay"; + + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + active-semi,vsel-high; + status = "okay"; + + regulators { + vdd_1v35_reg: DCDC_REG1 { + regulator-name = "VDD_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vdd_1v2_reg: DCDC_REG2 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + vdd_3v3_reg: DCDC_REG3 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_fuse_reg: LDO_REG1 { + regulator-name = "VDD_FUSE"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdd_3v3_lp_reg: LDO_REG2 { + regulator-name = "VDD_3V3_LP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_led_reg: LDO_REG3 { + regulator-name = "VDD_LED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_sdhc_1v8_reg: LDO_REG4 { + regulator-name = "VDD_SDHC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; }; uart3: serial@fc008000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_default>; status = "okay"; }; i2c1: i2c@fc028000 { dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; status = "okay"; at24@54 { @@ -129,6 +199,54 @@ pagesize = <16>; }; }; + + pinctrl@fc038000 { + pinctrl_i2c0_default: i2c0_default { + pinmux = <PIN_PD21__TWD0>, + <PIN_PD22__TWCK0>; + bias-disable; + }; + + pinctrl_i2c1_default: i2c1_default { + pinmux = <PIN_PD4__TWD1>, + <PIN_PD5__TWCK1>; + bias-disable; + }; + + pinctrl_macb0_default: macb0_default { + pinmux = <PIN_PB14__GTXCK>, + <PIN_PB15__GTXEN>, + <PIN_PB16__GRXDV>, + <PIN_PB17__GRXER>, + <PIN_PB18__GRX0>, + <PIN_PB19__GRX1>, + <PIN_PB20__GTX0>, + <PIN_PB21__GTX1>, + <PIN_PB22__GMDC>, + <PIN_PB23__GMDIO>; + bias-disable; + }; + + pinctrl_spi0_default: spi0_default { + pinmux = <PIN_PA14__SPI0_SPCK>, + <PIN_PA15__SPI0_MOSI>, + <PIN_PA16__SPI0_MISO>, + <PIN_PA17__SPI0_NPCS0>; + bias-disable; + }; + + pinctrl_uart1_default: uart1_default { + pinmux = <PIN_PD2__URXD1>, + <PIN_PD3__UTXD1>; + bias-disable; + }; + + pinctrl_uart3_default: uart3_default { + pinmux = <PIN_PB11__URXD3>, + <PIN_PB12__UTXD3>; + bias-disable; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index d81474e0bcd6..8488ac53d22d 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -76,7 +76,7 @@ pmic: act8865@5b { compatible = "active-semi,act8865"; reg = <0x5b>; - status = "okay"; + status = "disabled"; regulators { vcc_1v8_reg: DCDC_REG1 { diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 07f46963335b..45371a1b61b3 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -246,7 +246,7 @@ d8 { label = "d8"; gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; - status = "disabled"; + default-state = "on"; }; d10 { diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 49a59c7e4a5d..6d272c0125e3 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -148,6 +148,25 @@ clocks = <&pck2>; clock-names = "mclk"; }; + + qt1070:keyboard@1b { + compatible = "qt1070"; + reg = <0x1b>; + interrupt-parent = <&pioE>; + interrupts = <25 0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qt1070_irq>; + wakeup-source; + }; + + atmel_mxt_ts@4c { + compatible = "atmel,atmel_mxt_ts"; + reg = <0x4c>; + interrupt-parent = <&pioE>; + interrupts = <24 0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mxt_ts>; + }; }; macb0: ethernet@f8020000 { @@ -204,6 +223,14 @@ atmel,pins = <AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */ }; + pinctrl_qt1070_irq: qt1070_irq { + atmel,pins = + <AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + pinctrl_mxt_ts: mxt_irq { + atmel,pins = + <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 60edd8baebb8..f6cb7a80a2f5 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -97,7 +97,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; + compatible = "atmel,at91rm9200-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; @@ -426,7 +426,7 @@ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; clocks = <&ssc0_clk>; clock-names = "pclk"; - status = "disable"; + status = "disabled"; }; ssc1: ssc@fffd4000 { @@ -437,7 +437,7 @@ pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; clocks = <&ssc1_clk>; clock-names = "pclk"; - status = "disable"; + status = "disabled"; }; ssc2: ssc@fffd8000 { @@ -448,7 +448,7 @@ pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; clocks = <&ssc2_clk>; clock-names = "pclk"; - status = "disable"; + status = "disabled"; }; macb0: ethernet@fffbc000 { diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index be9c027ddd97..d4884dd1c243 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -100,7 +100,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9260-pmc"; + compatible = "atmel,at91sam9260-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index ce1e3e94a40c..5e09de4eb9cd 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -568,7 +568,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; + compatible = "atmel,at91rm9200-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index f1f5fa3a9e6e..93446420af25 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -93,7 +93,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; + compatible = "atmel,at91rm9200-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 18b8b9e29704..af8b708ac312 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -114,7 +114,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9g45-pmc"; + compatible = "atmel,at91sam9g45-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index d1ae60a855d4..9d16ef8453c5 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -198,6 +198,8 @@ isi_0: endpoint { remote-endpoint = <&ov2640_0>; bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 32bc9a189db0..95569a87b6c9 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -97,7 +97,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9n12-pmc"; + compatible = "atmel,at91sam9n12-pmc", "syscon"; reg = <0xfffffc00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index efa75064d38a..acf3451a332d 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -71,10 +71,6 @@ }; }; - i2c1: i2c@f8014000 { - status = "okay"; - }; - mmc0: mmc@f0008000 { pinctrl-0 = < &pinctrl_board_mmc0 @@ -204,13 +200,13 @@ }; d9 { - label = "d6"; + label = "d9"; gpios = <&pioB 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; d10 { - label = "d7"; + label = "d10"; gpios = <&pioB 6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index a0b90aedd3b8..6d829db4e887 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -814,7 +814,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9g45-pmc"; + compatible = "atmel,at91sam9g45-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 747d8f070a5c..0827d594b1f0 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -68,7 +68,7 @@ adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <5000000>; + clock-frequency = <1000000>; }; }; @@ -105,7 +105,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9x5-pmc"; + compatible = "atmel,at91sam9x5-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; @@ -1043,6 +1043,7 @@ atmel,adc-channels-used = <0xffff>; atmel,adc-vref = <3300>; atmel,adc-startup-time = <40>; + atmel,adc-sample-hold-time = <11>; atmel,adc-res = <8 10>; atmel,adc-res-names = "lowres", "highres"; atmel,adc-use-res = "highres"; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index d237c462dfc6..52425a4ca97e 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -66,6 +66,8 @@ isi_0: endpoint@0 { remote-endpoint = <&ov2640_0>; bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; }; }; }; @@ -100,6 +102,12 @@ }; }; + adc0: adc@f804c000 { + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + status = "okay"; + }; + pinctrl@fffff400 { camera_sensor { pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 { diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi index 24c935c72e5e..051ab3ba9a65 100644 --- a/arch/arm/boot/dts/axp209.dtsi +++ b/arch/arm/boot/dts/axp209.dtsi @@ -89,4 +89,9 @@ regulator-name = "ldo5"; }; }; + + usb_power_supply: usb_power_supply { + compatible = "x-powers,axp202-usb-power-supply"; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi new file mode 100644 index 000000000000..76302f58c478 --- /dev/null +++ b/arch/arm/boot/dts/axp22x.dtsi @@ -0,0 +1,143 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * AXP221/221s/223 Integrated Power Management Chip + * http://www.x-powers.com/product/AXP22X.php + * http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf + */ + +&axp22x { + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + /* Default work frequency for buck regulators */ + x-powers,dcdc-freq = <3000>; + + reg_dcdc1: dcdc1 { + regulator-name = "dcdc1"; + }; + + reg_dcdc2: dcdc2 { + regulator-name = "dcdc2"; + }; + + reg_dcdc3: dcdc3 { + regulator-name = "dcdc3"; + }; + + reg_dcdc4: dcdc4 { + regulator-name = "dcdc4"; + }; + + reg_dcdc5: dcdc5 { + regulator-name = "dcdc5"; + }; + + reg_dc1sw: dc1sw { + regulator-name = "dc1sw"; + }; + + reg_dc5ldo: dc5ldo { + regulator-name = "dc5ldo"; + }; + + reg_aldo1: aldo1 { + regulator-name = "aldo1"; + }; + + reg_aldo2: aldo2 { + regulator-name = "aldo2"; + }; + + reg_aldo3: aldo3 { + regulator-name = "aldo3"; + }; + + reg_dldo1: dldo1 { + regulator-name = "dldo1"; + }; + + reg_dldo2: dldo2 { + regulator-name = "dldo2"; + }; + + reg_dldo3: dldo3 { + regulator-name = "dldo3"; + }; + + reg_dldo4: dldo4 { + regulator-name = "dldo4"; + }; + + reg_eldo1: eldo1 { + regulator-name = "eldo1"; + }; + + reg_eldo2: eldo2 { + regulator-name = "eldo2"; + }; + + reg_eldo3: eldo3 { + regulator-name = "eldo3"; + }; + + reg_ldo_io0: ldo_io0 { + regulator-name = "ldo_io0"; + }; + + reg_ldo_io1: ldo_io1 { + regulator-name = "ldo_io1"; + }; + + reg_rtc_ldo: rtc_ldo { + /* RTC_LDO is a fixed, always-on regulator */ + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "rtc_ldo"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index e1ac07a16f92..2778533502d9 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -32,6 +32,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/bcm-cygnus.h> #include "skeleton.dtsi" @@ -54,197 +55,212 @@ /include/ "bcm-cygnus-clock.dtsi" - pinctrl: pinctrl@0x0301d0c8 { - compatible = "brcm,cygnus-pinmux"; - reg = <0x0301d0c8 0x30>, - <0x0301d24c 0x2c>; - }; - - gpio_crmu: gpio@03024800 { - compatible = "brcm,cygnus-crmu-gpio"; - reg = <0x03024800 0x50>, - <0x03024008 0x18>; - #gpio-cells = <2>; - gpio-controller; - }; - - gpio_ccm: gpio@1800a000 { - compatible = "brcm,cygnus-ccm-gpio"; - reg = <0x1800a000 0x50>, - <0x0301d164 0x20>; - #gpio-cells = <2>; - gpio-controller; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - }; + core { + compatible = "simple-bus"; + ranges = <0x00000000 0x19000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; - gpio_asiu: gpio@180a5000 { - compatible = "brcm,cygnus-asiu-gpio"; - reg = <0x180a5000 0x668>; - #gpio-cells = <2>; - gpio-controller; + timer@20200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x20200 0x100>; + interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + }; - pinmux = <&pinctrl>; + gic: interrupt-controller@21000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x21000 0x1000>, + <0x20100 0x100>; + }; - interrupt-controller; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x22000 0x1000>; + cache-unified; + cache-level = <2>; + }; }; - amba { + axi { + compatible = "simple-bus"; + ranges; #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus", "simple-bus"; - interrupt-parent = <&gic>; - ranges; - wdt@18009000 { - compatible = "arm,sp805" , "arm,primecell"; - reg = <0x18009000 0x1000>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&axi81_clk>; - clock-names = "apb_pclk"; + pinctrl: pinctrl@0x0301d0c8 { + compatible = "brcm,cygnus-pinmux"; + reg = <0x0301d0c8 0x30>, + <0x0301d24c 0x2c>; }; - }; - i2c0: i2c@18008000 { - compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; - reg = <0x18008000 0x100>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>; - clock-frequency = <100000>; - status = "disabled"; - }; + gpio_crmu: gpio@03024800 { + compatible = "brcm,cygnus-crmu-gpio"; + reg = <0x03024800 0x50>, + <0x03024008 0x18>; + #gpio-cells = <2>; + gpio-controller; + }; - i2c1: i2c@1800b000 { - compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; - reg = <0x1800b000 0x100>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>; - clock-frequency = <100000>; - status = "disabled"; - }; + i2c0: i2c@18008000 { + compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; + reg = <0x18008000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>; + clock-frequency = <100000>; + status = "disabled"; + }; - pcie0: pcie@18012000 { - compatible = "brcm,iproc-pcie"; - reg = <0x18012000 0x1000>; + wdt0: wdt@18009000 { + compatible = "arm,sp805" , "arm,primecell"; + reg = <0x18009000 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&axi81_clk>; + clock-names = "apb_pclk"; + }; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; + gpio_ccm: gpio@1800a000 { + compatible = "brcm,cygnus-ccm-gpio"; + reg = <0x1800a000 0x50>, + <0x0301d164 0x20>; + #gpio-cells = <2>; + gpio-controller; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + }; - linux,pci-domain = <0>; + i2c1: i2c@1800b000 { + compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; + reg = <0x1800b000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>; + clock-frequency = <100000>; + status = "disabled"; + }; - bus-range = <0x00 0xff>; + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x28000000 0 0x00010000 - 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; - status = "disabled"; - }; + linux,pci-domain = <0>; - pcie1: pcie@18013000 { - compatible = "brcm,iproc-pcie"; - reg = <0x18013000 0x1000>; + bus-range = <0x00 0xff>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x28000000 0 0x00010000 + 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; - linux,pci-domain = <1>; + status = "disabled"; + }; - bus-range = <0x00 0xff>; + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x48000000 0 0x00010000 - 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; - status = "disabled"; - }; + linux,pci-domain = <1>; - uart0: serial@18020000 { - compatible = "snps,dw-apb-uart"; - reg = <0x18020000 0x100>; - reg-shift = <2>; - reg-io-width = <4>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&axi81_clk>; - clock-frequency = <100000000>; - status = "disabled"; - }; + bus-range = <0x00 0xff>; - uart1: serial@18021000 { - compatible = "snps,dw-apb-uart"; - reg = <0x18021000 0x100>; - reg-shift = <2>; - reg-io-width = <4>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&axi81_clk>; - clock-frequency = <100000000>; - status = "disabled"; - }; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x48000000 0 0x00010000 + 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; - uart2: serial@18022000 { - compatible = "snps,dw-apb-uart"; - reg = <0x18020000 0x100>; - reg-shift = <2>; - reg-io-width = <4>; - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&axi81_clk>; - clock-frequency = <100000000>; - status = "disabled"; - }; + status = "disabled"; + }; - uart3: serial@18023000 { - compatible = "snps,dw-apb-uart"; - reg = <0x18023000 0x100>; - reg-shift = <2>; - reg-io-width = <4>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&axi81_clk>; - clock-frequency = <100000000>; - status = "disabled"; - }; + uart0: serial@18020000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18020000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; - nand: nand@18046000 { - compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; - reg = <0x18046000 0x600>, <0xf8105408 0x600>, <0x18046f00 0x20>; - reg-names = "nand", "iproc-idm", "iproc-ext"; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + uart1: serial@18021000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18021000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; - #address-cells = <1>; - #size-cells = <0>; + uart2: serial@18022000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18020000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; - brcm,nand-has-wp; - }; + uart3: serial@18023000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18023000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; - gic: interrupt-controller@19021000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x19021000 0x1000>, - <0x19020100 0x100>; - }; + nand: nand@18046000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; + reg = <0x18046000 0x600>, <0xf8105408 0x600>, + <0x18046f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - L2: l2-cache { - compatible = "arm,pl310-cache"; - reg = <0x19022000 0x1000>; - cache-unified; - cache-level = <2>; - }; + #address-cells = <1>; + #size-cells = <0>; - timer@19020200 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x19020200 0x100>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&periph_clk>; - }; + brcm,nand-has-wp; + }; + gpio_asiu: gpio@180a5000 { + compatible = "brcm,cygnus-asiu-gpio"; + reg = <0x180a5000 0x668>; + #gpio-cells = <2>; + gpio-controller; + + pinmux = <&pinctrl>; + + interrupt-controller; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + }; + + touchscreen: tsc@180a6000 { + compatible = "brcm,iproc-touchscreen"; + reg = <0x180a6000 0x40>; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; + clock-names = "tsc_clk"; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; }; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi new file mode 100644 index 000000000000..58aca277e4a7 --- /dev/null +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -0,0 +1,119 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +#include "skeleton.dtsi" + +/ { + compatible = "brcm,nsp"; + model = "Broadcom Northstar Plus SoC"; + interrupt-parent = <&gic>; + + mpcore { + compatible = "simple-bus"; + ranges = <0x00000000 0x19020000 0x00003000>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x2000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + gic: interrupt-controller@19021000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x0100 0x100>; + }; + + timer@19020200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x0200 0x100>; + interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + }; + }; + + axi { + compatible = "simple-bus"; + ranges = <0x00000000 0x18000000 0x00001000>; + #address-cells = <1>; + #size-cells = <1>; + + uart0: serial@18000300 { + compatible = "ns16550a"; + reg = <0x0300 0x100>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <62499840>; + status = "disabled"; + }; + + uart1: serial@18000400 { + compatible = "ns16550a"; + reg = <0x0400 0x100>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <62499840>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts new file mode 100644 index 000000000000..b2bff43b135c --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -0,0 +1,30 @@ +/dts-v1/; +#include "bcm2835-rpi.dtsi" + +/ { + compatible = "raspberrypi,model-a-plus", "brcm,bcm2835"; + model = "Raspberry Pi Model A+"; + + leds { + act { + gpios = <&gpio 47 0>; + }; + + pwr { + label = "PWR"; + gpios = <&gpio 35 0>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; + }; +}; + +&gpio { + pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>; + + /* I2S interface */ + i2s_alt0: i2s_alt0 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts new file mode 100644 index 000000000000..eab8b5916e8a --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -0,0 +1,23 @@ +/dts-v1/; +#include "bcm2835-rpi.dtsi" + +/ { + compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835"; + model = "Raspberry Pi Model B rev2"; + + leds { + act { + gpios = <&gpio 16 1>; + }; + }; +}; + +&gpio { + pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>; + + /* I2S interface */ + i2s_alt2: i2s_alt2 { + brcm,pins = <28 29 30 31>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index ee89b79426cf..ff6b2d1c6c90 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -13,11 +13,5 @@ }; &gpio { - pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>; - - /* I2S interface */ - i2s_alt2: i2s_alt2 { - brcm,pins = <28 29 30 31>; - brcm,function = <BCM2835_FSEL_ALT2>; - }; + pinctrl-0 = <&gpioout &alt0 &alt3>; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index ab5474e5d1c8..3572f0367baf 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -52,6 +52,10 @@ clock-frequency = <100000>; }; +&i2c2 { + status = "okay"; +}; + &sdhci { status = "okay"; bus-width = <4>; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 301c73f4ca33..aef64de77495 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -1,4 +1,5 @@ #include <dt-bindings/pinctrl/bcm2835.h> +#include <dt-bindings/clock/bcm2835.h> #include "skeleton.dtsi" / { @@ -21,6 +22,10 @@ compatible = "brcm,bcm2835-system-timer"; reg = <0x7e003000 0x1000>; interrupts = <1 0>, <1 1>, <1 2>, <1 3>; + /* This could be a reference to BCM2835_CLOCK_TIMER, + * but we don't have the driver using the common clock + * support yet. + */ clock-frequency = <1000000>; }; @@ -57,6 +62,17 @@ reg = <0x7e100000 0x28>; }; + clocks: cprman@7e101000 { + compatible = "brcm,bcm2835-cprman"; + #clock-cells = <1>; + reg = <0x7e101000 0x2000>; + + /* CPRMAN derives everything from the platform's + * oscillator. + */ + clocks = <&clk_osc>; + }; + rng@7e104000 { compatible = "brcm,bcm2835-rng"; reg = <0x7e104000 0x10>; @@ -92,11 +108,13 @@ #interrupt-cells = <2>; }; - uart@7e201000 { + uart0: uart@7e201000 { compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; reg = <0x7e201000 0x1000>; interrupts = <2 25>; - clock-frequency = <3000000>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; arm,primecell-periphid = <0x00241011>; }; @@ -115,7 +133,7 @@ compatible = "brcm,bcm2835-spi"; reg = <0x7e204000 0x1000>; interrupts = <2 22>; - clocks = <&clk_spi>; + clocks = <&clocks BCM2835_CLOCK_VPU>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -125,7 +143,7 @@ compatible = "brcm,bcm2835-i2c"; reg = <0x7e205000 0x1000>; interrupts = <2 21>; - clocks = <&clk_i2c>; + clocks = <&clocks BCM2835_CLOCK_VPU>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -135,7 +153,7 @@ compatible = "brcm,bcm2835-sdhci"; reg = <0x7e300000 0x100>; interrupts = <2 30>; - clocks = <&clk_mmc>; + clocks = <&clocks BCM2835_CLOCK_EMMC>; status = "disabled"; }; @@ -143,7 +161,17 @@ compatible = "brcm,bcm2835-i2c"; reg = <0x7e804000 0x1000>; interrupts = <2 21>; - clocks = <&clk_i2c>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@7e805000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e805000 0x1000>; + interrupts = <2 21>; + clocks = <&clocks BCM2835_CLOCK_VPU>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -165,28 +193,14 @@ #address-cells = <1>; #size-cells = <0>; - clk_mmc: clock@0 { + /* The oscillator is the root of the clock tree. */ + clk_osc: clock@3 { compatible = "fixed-clock"; - reg = <0>; + reg = <3>; #clock-cells = <0>; - clock-output-names = "mmc"; - clock-frequency = <100000000>; + clock-output-names = "osc"; + clock-frequency = <19200000>; }; - clk_i2c: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-output-names = "i2c"; - clock-frequency = <250000000>; - }; - - clk_spi: clock@2 { - compatible = "fixed-clock"; - reg = <2>; - #clock-cells = <0>; - clock-output-names = "spi"; - clock-frequency = <250000000>; - }; }; }; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 64b8d10ccff8..ca92bba6a8c5 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -24,6 +24,17 @@ reg = <0x00000000 0x08000000>; }; + axi@18000000 { + usb3@23000 { + reg = <0x00023000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; + }; + }; + leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index aedf3c426e1f..8ade7def2e8a 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708"; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts new file mode 100644 index 000000000000..a22ed144040b --- /dev/null +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -0,0 +1,106 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Netgear R7000 + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "netgear,r7000", "brcm,bcm4709", "brcm,bcm4708"; + model = "Netgear R7000"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:white:5ghz"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wireless { + label = "bcm53xx:white:wireless"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + + rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi index 3b6b17560687..4791321969b3 100644 --- a/arch/arm/boot/dts/bcm7445.dtsi +++ b/arch/arm/boot/dts/bcm7445.dtsi @@ -143,6 +143,12 @@ brcm,irq-can-wake; }; + aon-ctrl@410000 { + compatible = "brcm,brcmstb-aon-ctrl"; + reg = <0x410000 0x200>, <0x410200 0x400>; + reg-names = "aon-ctrl", "aon-sram"; + }; + nand: nand@3e2800 { status = "disabled"; #address-cells = <1>; @@ -219,6 +225,84 @@ }; + memory_controllers { + compatible = "simple-bus"; + ranges = <0x0 0x0 0xf1100000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + + memc@0 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x80000>; + + memc-ddr@2000 { + compatible = "brcm,brcmstb-memc-ddr"; + reg = <0x2000 0x800>; + }; + + ddr-phy@6000 { + compatible = "brcm,brcmstb-ddr-phy-v240.1"; + reg = <0x6000 0x21c>; + }; + + shimphy@8000 { + compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; + reg = <0x8000 0xe4>; + }; + }; + + memc@1 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x80000>; + + memc-ddr@2000 { + compatible = "brcm,brcmstb-memc-ddr"; + reg = <0x2000 0x800>; + }; + + ddr-phy@6000 { + compatible = "brcm,brcmstb-ddr-phy-v240.1"; + reg = <0x6000 0x21c>; + }; + + shimphy@8000 { + compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; + reg = <0x8000 0xe4>; + }; + }; + + memc@2 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x100000 0x80000>; + + memc-ddr@2000 { + compatible = "brcm,brcmstb-memc-ddr"; + reg = <0x2000 0x800>; + }; + + ddr-phy@6000 { + compatible = "brcm,brcmstb-ddr-phy-v240.1"; + reg = <0x6000 0x21c>; + }; + + shimphy@8000 { + compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; + reg = <0x8000 0xe4>; + }; + }; + }; + + sram@ffe00000 { + compatible = "brcm,boot-sram", "mmio-sram"; + reg = <0x0 0xffe00000 0x0 0x10000>; + }; + smpboot { compatible = "brcm,brcmstb-smpboot"; syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>; diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts index 7db484323fd6..8b3800f46288 100644 --- a/arch/arm/boot/dts/bcm911360_entphn.dts +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -39,19 +39,11 @@ model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)"; compatible = "brcm,bcm11360", "brcm,cygnus"; - aliases { - serial0 = &uart3; - }; - chosen { stdout-path = &uart3; bootargs = "console=ttyS0,115200"; }; - uart3: serial@18023000 { - status = "okay"; - }; - gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -64,3 +56,23 @@ }; }; }; + +&uart3 { + status = "okay"; +}; + +&nand { + nandcs@1 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + }; +}; diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/bcm911360k.dts index 9658d4f62d59..091c73a46e08 100644 --- a/arch/arm/boot/dts/bcm911360k.dts +++ b/arch/arm/boot/dts/bcm911360k.dts @@ -43,11 +43,10 @@ }; chosen { - stdout-path = &uart3; - bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; +}; - uart3: serial@18023000 { - status = "okay"; - }; +&uart3 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts index 2f63052f9d48..b4a1392bd5a6 100644 --- a/arch/arm/boot/dts/bcm958300k.dts +++ b/arch/arm/boot/dts/bcm958300k.dts @@ -33,6 +33,7 @@ /dts-v1/; #include "bcm-cygnus.dtsi" +#include "bcm9hmidc.dtsi" / { model = "Cygnus SVK (BCM958300K)"; @@ -43,35 +44,34 @@ }; chosen { - stdout-path = &uart3; - bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; +}; - pcie0: pcie@18012000 { - status = "okay"; - }; +&pcie0 { + status = "okay"; +}; - pcie1: pcie@18013000 { - status = "okay"; - }; +&pcie1 { + status = "okay"; +}; - uart3: serial@18023000 { - status = "okay"; - }; +&uart3 { + status = "okay"; +}; - nand: nand@18046000 { - nandcs@1 { - compatible = "brcm,nandcs"; - reg = <0>; - nand-on-flash-bbt; +&nand { + nandcs@1 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; - nand-ecc-strength = <24>; - nand-ecc-step-size = <1024>; + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; - brcm,nand-oob-sector-size = <27>; - }; + brcm,nand-oob-sector-size = <27>; }; }; diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts index 56b429abbedb..3378683321d3 100644 --- a/arch/arm/boot/dts/bcm958305k.dts +++ b/arch/arm/boot/dts/bcm958305k.dts @@ -33,6 +33,7 @@ /dts-v1/; #include "bcm-cygnus.dtsi" +#include "bcm9hmidc.dtsi" / { model = "Cygnus Wireless Audio (BCM958305K)"; @@ -43,11 +44,42 @@ }; chosen { - stdout-path = &uart3; - bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&nand { + nandcs@1 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; - uart3: serial@18023000 { - status = "okay"; + brcm,nand-oob-sector-size = <27>; }; }; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts new file mode 100644 index 000000000000..16303dbd35df --- /dev/null +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -0,0 +1,57 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" + +/ { + model = "NorthStar Plus SVK (BCM958625K)"; + compatible = "brcm,bcm58625", "brcm,nsp"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm9hmidc.dtsi b/arch/arm/boot/dts/bcm9hmidc.dtsi new file mode 100644 index 000000000000..65397c088335 --- /dev/null +++ b/arch/arm/boot/dts/bcm9hmidc.dtsi @@ -0,0 +1,42 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * Broadcom human machine interface daughter card (bcm9hmidc) installed on + * bcm958300k/bcm958305k boards + */ + +&touchscreen { + touchscreen-inverted-x; + touchscreen-inverted-y; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts index 5c99fb3a4d10..3c0907b87fd6 100644 --- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts +++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts @@ -45,7 +45,8 @@ compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index ef811de09908..eaadac3bdd44 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -47,6 +47,12 @@ model = "Marvell Armada 1500 (BG2) SoC"; compatible = "marvell,berlin2", "marvell,berlin"; + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -57,6 +63,16 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <0>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + operating-points = < + /* kHz uV */ + 1200000 1200000 + 1000000 1200000 + 800000 1200000 + 600000 1200000 + >; }; cpu@1 { @@ -404,6 +420,13 @@ }; }; + pwm: pwm@f20000 { + compatible = "marvell,berlin-pwm"; + reg = <0xf20000 0x40>; + clocks = <&chip_clk CLKID_CFG>; + #pwm-cells = <3>; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts index 772165ad0a52..8ba8b50ce997 100644 --- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts +++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts @@ -46,7 +46,8 @@ compatible = "google,chromecast", "marvell,berlin2cd", "marvell,berlin"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 900213d78a32..b16df157214d 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -47,6 +47,11 @@ model = "Marvell Armada 1500-mini (BG2CD) SoC"; compatible = "marvell,berlin2cd", "marvell,berlin"; + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -56,6 +61,14 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <0>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + operating-points = < + /* kHz uV */ + 800000 1200000 + 600000 1200000 + >; }; }; @@ -368,6 +381,13 @@ status = "disabled"; }; + pwm: pwm@f20000 { + compatible = "marvell,berlin-pwm"; + reg = <0xf20000 0x40>; + clocks = <&chip_clk CLKID_CFG>; + #pwm-cells = <3>; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts index 4a749e5b3b44..da28c9704a9d 100644 --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -49,7 +49,8 @@ }; choosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; regulators { diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index d4dbd28d348c..8ea177f375dd 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -43,6 +43,11 @@ model = "Marvell Armada 1500 pro (BG2-Q) SoC"; compatible = "marvell,berlin2q", "marvell,berlin"; + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -53,6 +58,17 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <0>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + /* Can be modified by the bootloader */ + operating-points = < + /* kHz uV */ + 1200000 1200000 + 1000000 1200000 + 800000 1200000 + 600000 1200000 + >; }; cpu@1 { @@ -477,6 +493,13 @@ status = "disabled"; }; + pwm: pwm@f20000 { + compatible = "marvell,berlin-pwm"; + reg = <0xf20000 0x40>; + clocks = <&chip_clk CLKID_CFG>; + #pwm-cells = <3>; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi index df4c6f1f93f9..a5a23c376418 100644 --- a/arch/arm/boot/dts/cx92755.dtsi +++ b/arch/arm/boot/dts/cx92755.dtsi @@ -95,6 +95,13 @@ timeout-sec = <15>; }; + pinctrl: pinctrl@f0000e20 { + compatible = "cnxt,cx92755-pinctrl"; + reg = <0xf0000e20 0x100>; + gpio-controller; + #gpio-cells = <2>; + }; + uc_regs: syscon@f00003a0 { compatible = "cnxt,cx92755-uc", "syscon"; reg = <0xf00003a0 0x10>; diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cx92755_equinox.dts index 5da00806c41e..026f556c8c50 100644 --- a/arch/arm/boot/dts/cx92755_equinox.dts +++ b/arch/arm/boot/dts/cx92755_equinox.dts @@ -70,8 +70,17 @@ &uart0 { status = "okay"; + pinctrl-0 = <&uart0_default>; + pinctrl-names = "default"; }; &i2c { status = "okay"; }; + +&pinctrl { + uart0_default: uart0_active { + pins = "GP_O0", "GP_O1"; + function = "client_b"; + }; +}; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 179121630ad7..cd58c2e62757 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -263,12 +263,13 @@ }; crypto: crypto-engine@30000 { - compatible = "marvell,orion-crypto"; - reg = <0x30000 0x10000>, - <0xffffe000 0x800>; - reg-names = "regs", "sram"; + compatible = "marvell,dove-crypto"; + reg = <0x30000 0x10000>; + reg-names = "regs"; interrupts = <31>; clocks = <&gate_clk 15>; + marvell,crypto-srams = <&crypto_sram>; + marvell,crypto-sram-size = <0x800>; status = "okay"; }; @@ -767,6 +768,14 @@ interrupts = <47>; status = "disabled"; }; + + crypto_sram: sa-sram@ffffe000 { + compatible = "mmio-sram"; + reg = <0xffffe000 0x800>; + clocks = <&gate_clk 15>; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; }; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index a6c82e5b64fe..864f60020124 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -9,6 +9,8 @@ #include "dra74x.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clk/ti-dra7-atl.h> +#include <dt-bindings/input/input.h> / { model = "TI DRA742"; @@ -28,13 +30,22 @@ gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>; }; - mmc2_3v3: fixedregulator-mmc2 { + evm_3v3_sw: fixedregulator-evm_3v3_sw { compatible = "regulator-fixed"; - regulator-name = "mmc2_3v3"; + regulator-name = "evm_3v3_sw"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + aic_dvdd: fixedregulator-aic_dvdd { + /* TPS77018DBVT */ + compatible = "regulator-fixed"; + regulator-name = "aic_dvdd"; + vin-supply = <&evm_3v3_sw>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + extcon_usb1: extcon_usb1 { compatible = "linux,extcon-usb-gpio"; id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; @@ -55,6 +66,86 @@ enable-active-high; gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; }; + + sound0: sound@0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "DRA7xx-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out", + "Microphone", "Mic Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE1L", "Line In", + "LINE1R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + sound0_master: simple-audio-card,cpu { + sound-dai = <&mcasp3>; + system-clock-frequency = <5644800>; + }; + + simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&atl_clkin2_ck>; + }; + }; + + leds { + compatible = "gpio-leds"; + led@0 { + label = "dra7:usr1"; + gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led@1 { + label = "dra7:usr2"; + gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led@2 { + label = "dra7:usr3"; + gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led@3 { + label = "dra7:usr4"; + gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + USER1 { + label = "btnUser1"; + linux,code = <BTN_0>; + gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>; + }; + + USER2 { + label = "btnUser2"; + linux,code = <BTN_1>; + gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>; + }; + }; }; &dra7_pmx_core { @@ -283,6 +374,31 @@ 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; + + atl_pins: pinmux_atl_pins { + pinctrl-single,pins = < + 0x298 (PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ + 0x29c (PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ + >; + }; + + mcasp3_pins: pinmux_mcasp3_pins { + pinctrl-single,pins = < + 0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ + 0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ + 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ + 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ + >; + }; + + mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { + pinctrl-single,pins = < + 0x324 (MUX_MODE15) + 0x328 (MUX_MODE15) + 0x32c (MUX_MODE15) + 0x330 (MUX_MODE15) + >; + }; }; &i2c1 { @@ -410,6 +526,17 @@ }; }; + pcf_lcd: gpio@20 { + compatible = "nxp,pcf8575"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + pcf_gpio_21: gpio@21 { compatible = "ti,pcf8575"; reg = <0x21>; @@ -422,6 +549,20 @@ #interrupt-cells = <2>; }; + tlv320aic3106: tlv320aic3106@19 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x19>; + adc-settle-ms = <40>; + ai3x-micbias-vg = <1>; /* 2.0V */ + status = "okay"; + + /* Regulators */ + AVDD-supply = <&evm_3v3_sw>; + IOVDD-supply = <&evm_3v3_sw>; + DRVDD-supply = <&evm_3v3_sw>; + DVDD-supply = <&aic_dvdd>; + }; }; &i2c2 { @@ -429,6 +570,20 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; + + pcf_hdmi: gpio@26 { + compatible = "nxp,pcf8575"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + p1 { + /* vin6_sel_s0: high: VIN6, low: audio */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "vin6_sel_s0"; + }; + }; }; &i2c3 { @@ -479,12 +634,12 @@ * SDCD signal is not being used here - using the fact that GPIO mode * is always hardwired. */ - cd-gpios = <&gpio6 27 0>; + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; }; &mmc2 { status = "okay"; - vmmc-supply = <&mmc2_3v3>; + vmmc-supply = <&evm_3v3_sw>; bus-width = <8>; }; @@ -707,3 +862,62 @@ pinctrl-1 = <&dcan1_pins_sleep>; pinctrl-2 = <&dcan1_pins_default>; }; + +&atl { + pinctrl-names = "default"; + pinctrl-0 = <&atl_pins>; + + assigned-clocks = <&abe_dpll_sys_clk_mux>, + <&atl_gfclk_mux>, + <&dpll_abe_ck>, + <&dpll_abe_m2x2_ck>, + <&atl_clkin2_ck>; + assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; + assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; + + status = "okay"; + + atl2 { + bws = <DRA7_ATL_WS_MCASP2_FSX>; + aws = <DRA7_ATL_WS_MCASP3_FSX>; + }; +}; + +&mcasp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp3_pins>; + pinctrl-1 = <&mcasp3_sleep_pins>; + + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&atl_clkin2_ck>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 8fedddc35999..bc672fb91466 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -292,6 +292,11 @@ #thermal-sensor-cells = <1>; }; + dsp1_system: dsp_system@40d00000 { + compatible = "syscon"; + reg = <0x40d00000 0x100>; + }; + sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; @@ -911,6 +916,46 @@ status = "disabled"; }; + mmu0_dsp1: mmu@40d01000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x40d01000 0x100>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmu0_dsp1"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp1_system 0x0>; + status = "disabled"; + }; + + mmu1_dsp1: mmu@40d02000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x40d02000 0x100>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmu1_dsp1"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp1_system 0x1>; + status = "disabled"; + }; + + mmu_ipu1: mmu@58882000 { + compatible = "ti,dra7-iommu"; + reg = <0x58882000 0x100>; + interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmu_ipu1"; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + status = "disabled"; + }; + + mmu_ipu2: mmu@55082000 { + compatible = "ti,dra7-iommu"; + reg = <0x55082000 0x100>; + interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmu_ipu2"; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + status = "disabled"; + }; + abb_mpu: regulator-abb-mpu { compatible = "ti,abb-v3"; regulator-name = "abb_mpu"; @@ -1404,6 +1449,21 @@ status = "disabled"; }; + mcasp3: mcasp@48468000 { + compatible = "ti,dra7-mcasp-audio"; + ti,hwmods = "mcasp3"; + reg = <0x48468000 0x2000>; + reg-names = "mpu"; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&sdma_xbar 133>, <&sdma_xbar 132>; + dma-names = "tx", "rx"; + clocks = <&mcasp3_ahclkx_mux>; + clock-names = "fck"; + status = "disabled"; + }; + crossbar_mpu: crossbar@4a002a48 { compatible = "ti,irq-crossbar"; reg = <0x4a002a48 0x130>; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 6f6bd98c98df..d6104d5f0c01 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -9,6 +9,7 @@ #include "dra72x.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clk/ti-dra7-atl.h> / { model = "TI DRA722"; @@ -30,6 +31,15 @@ regulator-max-microvolt = <3300000>; }; + aic_dvdd: fixedregulator-aic_dvdd { + /* TPS77018DBVT */ + compatible = "regulator-fixed"; + regulator-name = "aic_dvdd"; + vin-supply = <&evm_3v3>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + evm_3v3_sd: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "evm_3v3_sd"; @@ -93,6 +103,40 @@ }; }; }; + + sound0: sound@0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "DRA7xx-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out", + "Microphone", "Mic Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE1L", "Line In", + "LINE1R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + sound0_master: simple-audio-card,cpu { + sound-dai = <&mcasp3>; + system-clock-frequency = <5644800>; + }; + + simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&atl_clkin2_ck>; + }; + }; }; &dra7_pmx_core { @@ -110,6 +154,13 @@ >; }; + i2c5_pins: pinmux_i2c5_pins { + pinctrl-single,pins = < + 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ + 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ + >; + }; + nand_default: nand_default { pinctrl-single,pins = < 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ @@ -220,6 +271,31 @@ 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ >; }; + + atl_pins: pinmux_atl_pins { + pinctrl-single,pins = < + 0x298 (PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ + 0x29c (PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ + >; + }; + + mcasp3_pins: pinmux_mcasp3_pins { + pinctrl-single,pins = < + 0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ + 0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ + 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ + 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ + >; + }; + + mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { + pinctrl-single,pins = < + 0x324 (PIN_INPUT_PULLDOWN | MUX_MODE15) + 0x328 (PIN_INPUT_PULLDOWN | MUX_MODE15) + 0x32c (PIN_INPUT_PULLDOWN | MUX_MODE15) + 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE15) + >; + }; }; &i2c1 { @@ -353,12 +429,21 @@ interrupts = <11 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <2>; + }; - cpsw_sel_s0 { - gpio-hog; - gpios = <4 GPIO_ACTIVE_HIGH>; - output-low; - }; + tlv320aic3106: tlv320aic3106@19 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x19>; + adc-settle-ms = <40>; + ai3x-micbias-vg = <1>; /* 2.0V */ + status = "okay"; + + /* Regulators */ + AVDD-supply = <&evm_3v3>; + IOVDD-supply = <&evm_3v3>; + DRVDD-supply = <&evm_3v3>; + DVDD-supply = <&aic_dvdd>; }; }; @@ -380,6 +465,14 @@ * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6 */ lines-initial-states = <0x0f2b>; + + p1 { + /* vin6_sel_s0: high: VIN6, low: audio */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "vin6_sel_s0"; + }; }; }; @@ -514,7 +607,7 @@ * SDCD signal is not being used here - using the fact that GPIO mode * is a viable alternative */ - cd-gpios = <&gpio6 27 0>; + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; max-frequency = <192000000>; }; @@ -590,6 +683,7 @@ pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; slaves = <1>; + mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>; }; &cpsw_emac0 { @@ -695,3 +789,59 @@ }; }; }; + +&atl { + pinctrl-names = "default"; + pinctrl-0 = <&atl_pins>; + + assigned-clocks = <&abe_dpll_sys_clk_mux>, + <&atl_gfclk_mux>, + <&dpll_abe_ck>, + <&dpll_abe_m2x2_ck>, + <&atl_clkin2_ck>; + assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; + assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; + + status = "okay"; + + atl2 { + bws = <DRA7_ATL_WS_MCASP2_FSX>; + aws = <DRA7_ATL_WS_MCASP3_FSX>; + }; +}; + +&mcasp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp3_pins>; + pinctrl-1 = <&mcasp3_sleep_pins>; + + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&atl_clkin2_ck>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index eaca143faa77..70a217050a4c 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -45,3 +45,24 @@ <&dss_video1_clk>; clock-names = "fck", "video1_clk"; }; + +&mailbox5 { + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + ti,mbox-tx = <6 2 2>; + ti,mbox-rx = <4 2 2>; + status = "disabled"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + ti,mbox-tx = <5 2 2>; + ti,mbox-rx = <1 2 2>; + status = "disabled"; + }; +}; + +&mailbox6 { + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + ti,mbox-tx = <6 2 2>; + ti,mbox-rx = <4 2 2>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index feea98e0a4b5..8bcc47db1cd1 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -52,6 +52,11 @@ }; ocp { + dsp2_system: dsp_system@41500000 { + compatible = "syscon"; + reg = <0x41500000 0x100>; + }; + omap_dwc3_4: omap_dwc3_4@48940000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss4"; @@ -76,6 +81,26 @@ dr_mode = "otg"; }; }; + + mmu0_dsp2: mmu@41501000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x41501000 0x100>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmu0_dsp2"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp2_system 0x0>; + status = "disabled"; + }; + + mmu1_dsp2: mmu@41502000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x41502000 0x100>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmu1_dsp2"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp2_system 0x1>; + status = "disabled"; + }; }; }; @@ -93,3 +118,29 @@ <&dss_video2_clk>; clock-names = "fck", "video1_clk", "video2_clk"; }; + +&mailbox5 { + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + ti,mbox-tx = <6 2 2>; + ti,mbox-rx = <4 2 2>; + status = "disabled"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + ti,mbox-tx = <5 2 2>; + ti,mbox-rx = <1 2 2>; + status = "disabled"; + }; +}; + +&mailbox6 { + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + ti,mbox-tx = <6 2 2>; + ti,mbox-rx = <4 2 2>; + status = "disabled"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + ti,mbox-tx = <5 2 2>; + ti,mbox-rx = <1 2 2>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts index b4031fa4a567..504cf45d3cb8 100644 --- a/arch/arm/boot/dts/efm32gg-dk3750.dts +++ b/arch/arm/boot/dts/efm32gg-dk3750.dts @@ -26,7 +26,7 @@ }; i2c@4000a000 { - efm32,location = <3>; + energymicro,location = <3>; status = "ok"; temp@48 { @@ -43,7 +43,7 @@ spi0: spi@4000c000 { /* USART0 */ cs-gpios = <&gpio 68 1>; // E4 - location = <1>; + energymicro,location = <1>; status = "ok"; microsd@0 { @@ -57,7 +57,7 @@ spi1: spi@4000c400 { /* USART1 */ cs-gpios = <&gpio 51 1>; // D3 - location = <1>; + energymicro,location = <1>; status = "ok"; ks8851@0 { @@ -70,7 +70,7 @@ }; uart4: uart@4000e400 { /* UART1 */ - location = <2>; + energymicro,location = <2>; status = "ok"; }; diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi index 106d505c5d3d..c747983771c7 100644 --- a/arch/arm/boot/dts/efm32gg.dtsi +++ b/arch/arm/boot/dts/efm32gg.dtsi @@ -23,7 +23,7 @@ soc { adc: adc@40002000 { - compatible = "efm32,adc"; + compatible = "energymicro,efm32-adc"; reg = <0x40002000 0x400>; interrupts = <7>; clocks = <&cmu clk_HFPERCLKADC0>; @@ -31,7 +31,7 @@ }; gpio: gpio@40006000 { - compatible = "efm32,gpio"; + compatible = "energymicro,efm32-gpio"; reg = <0x40006000 0x1000>; interrupts = <1 11>; gpio-controller; @@ -45,7 +45,7 @@ i2c0: i2c@4000a000 { #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,i2c"; + compatible = "energymicro,efm32-i2c"; reg = <0x4000a000 0x400>; interrupts = <9>; clocks = <&cmu clk_HFPERCLKI2C0>; @@ -56,7 +56,7 @@ i2c1: i2c@4000a400 { #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,i2c"; + compatible = "energymicro,efm32-i2c"; reg = <0x4000a400 0x400>; interrupts = <10>; clocks = <&cmu clk_HFPERCLKI2C1>; @@ -67,7 +67,7 @@ spi0: spi@4000c000 { /* USART0 */ #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,spi"; + compatible = "energymicro,efm32-spi"; reg = <0x4000c000 0x400>; interrupts = <3 4>; clocks = <&cmu clk_HFPERCLKUSART0>; @@ -77,7 +77,7 @@ spi1: spi@4000c400 { /* USART1 */ #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,spi"; + compatible = "energymicro,efm32-spi"; reg = <0x4000c400 0x400>; interrupts = <15 16>; clocks = <&cmu clk_HFPERCLKUSART1>; @@ -87,7 +87,7 @@ spi2: spi@4000c800 { /* USART2 */ #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,spi"; + compatible = "energymicro,efm32-spi"; reg = <0x4000c800 0x400>; interrupts = <18 19>; clocks = <&cmu clk_HFPERCLKUSART2>; @@ -95,7 +95,7 @@ }; uart0: uart@4000c000 { /* USART0 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000c000 0x400>; interrupts = <3 4>; clocks = <&cmu clk_HFPERCLKUSART0>; @@ -103,7 +103,7 @@ }; uart1: uart@4000c400 { /* USART1 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000c400 0x400>; interrupts = <15 16>; clocks = <&cmu clk_HFPERCLKUSART1>; @@ -111,7 +111,7 @@ }; uart2: uart@4000c800 { /* USART2 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000c800 0x400>; interrupts = <18 19>; clocks = <&cmu clk_HFPERCLKUSART2>; @@ -119,7 +119,7 @@ }; uart3: uart@4000e000 { /* UART0 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000e000 0x400>; interrupts = <20 21>; clocks = <&cmu clk_HFPERCLKUART0>; @@ -127,7 +127,7 @@ }; uart4: uart@4000e400 { /* UART1 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000e400 0x400>; interrupts = <22 23>; clocks = <&cmu clk_HFPERCLKUART1>; @@ -135,28 +135,28 @@ }; timer0: timer@40010000 { - compatible = "efm32,timer"; + compatible = "energymicro,efm32-timer"; reg = <0x40010000 0x400>; interrupts = <2>; clocks = <&cmu clk_HFPERCLKTIMER0>; }; timer1: timer@40010400 { - compatible = "efm32,timer"; + compatible = "energymicro,efm32-timer"; reg = <0x40010400 0x400>; interrupts = <12>; clocks = <&cmu clk_HFPERCLKTIMER1>; }; timer2: timer@40010800 { - compatible = "efm32,timer"; + compatible = "energymicro,efm32-timer"; reg = <0x40010800 0x400>; interrupts = <13>; clocks = <&cmu clk_HFPERCLKTIMER2>; }; timer3: timer@40010c00 { - compatible = "efm32,timer"; + compatible = "energymicro,efm32-timer"; reg = <0x40010c00 0x400>; interrupts = <14>; clocks = <&cmu clk_HFPERCLKTIMER3>; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 540a0adf2be6..443a35085846 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -52,13 +52,13 @@ regulator-name = "V_EMMC_2.8V-fixed"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpk0 2 0>; + gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; enable-active-high; }; i2c_max77836: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpd0 2 0>, <&gpd0 3 0>; + gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -161,6 +161,7 @@ }; &exynos_usbphy { + vbus-supply = <&safeout_reg>; status = "okay"; }; @@ -266,14 +267,14 @@ regulator-name = "V_EMMC_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo12_reg: LDO12 { regulator-name = "V_EMMC_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo13_reg: LDO13 { diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 41a5fafb9aa9..3e64d5dcdd60 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -49,7 +49,7 @@ i2c_max77836: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpd0 2 0>, <&gpd0 3 0>; + gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -153,6 +153,7 @@ &exynos_usbphy { status = "okay"; + vbus-supply = <&safeout_reg>; }; &hsotg { @@ -188,8 +189,8 @@ reg = <0>; vdd3-supply = <&ldo16_reg>; vci-supply = <&ldo20_reg>; - reset-gpios = <&gpe0 1 0>; - te-gpios = <&gpx0 6 0>; + reset-gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>; + te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; power-on-delay= <30>; power-off-delay= <120>; reset-delay = <5>; @@ -368,14 +369,14 @@ regulator-name = "V_EMMC_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo12_reg: LDO12 { regulator-name = "V_EMMC_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo13_reg: LDO13 { diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 033def482fc3..2f30d632f1cc 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -333,7 +333,7 @@ }; mshc_0: mshc@12510000 { - compatible = "samsung,exynos5250-dw-mshc"; + compatible = "samsung,exynos5420-dw-mshc"; reg = <0x12510000 0x1000>; interrupts = <0 142 0>; clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>; @@ -345,7 +345,7 @@ }; mshc_1: mshc@12520000 { - compatible = "samsung,exynos5250-dw-mshc"; + compatible = "samsung,exynos5420-dw-mshc"; reg = <0x12520000 0x1000>; interrupts = <0 143 0>; clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 98c0a368b777..3184e10f260a 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -431,6 +431,8 @@ interrupts = <0 52 0>; clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 15>, <&pdma0 16>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -440,6 +442,8 @@ interrupts = <0 53 0>; clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 15>, <&pdma1 16>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -449,6 +453,8 @@ interrupts = <0 54 0>; clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 17>, <&pdma0 18>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -458,6 +464,8 @@ interrupts = <0 55 0>; clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 17>, <&pdma1 18>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index e050d85cdacd..b8f866991bdd 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -16,6 +16,7 @@ /dts-v1/; #include "exynos4210.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { @@ -45,7 +46,7 @@ regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 0>; + gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -57,35 +58,35 @@ up { label = "Up"; - gpios = <&gpx2 0 1>; + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_UP>; gpio-key,wakeup; }; down { label = "Down"; - gpios = <&gpx2 1 1>; + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_DOWN>; gpio-key,wakeup; }; back { label = "Back"; - gpios = <&gpx1 7 1>; + gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; gpio-key,wakeup; }; home { label = "Home"; - gpios = <&gpx1 6 1>; + gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; gpio-key,wakeup; }; menu { label = "Menu"; - gpios = <&gpx1 5 1>; + gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; gpio-key,wakeup; }; @@ -94,7 +95,7 @@ leds { compatible = "gpio-leds"; status { - gpios = <&gpx1 3 1>; + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 043b03caff8f..bc1448ba95d3 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -16,6 +16,7 @@ /dts-v1/; #include "exynos4210.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Samsung smdkv310 evaluation board based on Exynos4210"; @@ -182,7 +183,7 @@ }; &spi_2 { - cs-gpios = <&gpc1 2 0>; + cs-gpios = <&gpc1 2 GPIO_ACTIVE_HIGH>; status = "okay"; w25x80@0 { diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index ba34886f8b65..a50be640f1b0 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4210.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Samsung Trats based on Exynos4210"; @@ -39,7 +40,7 @@ regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpk0 2 0>; + gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -48,7 +49,7 @@ regulator-name = "TSP_FIXED_VOLTAGES"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpl0 3 0>; + gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -57,7 +58,7 @@ regulator-name = "8M_AF_2.8V_EN"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpk1 1 0>; + gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -66,7 +67,7 @@ regulator-name = "CAM_IO_EN"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpe2 1 0>; + gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -75,7 +76,7 @@ regulator-name = "8M_1.2V_EN"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - gpio = <&gpe2 5 0>; + gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -84,7 +85,7 @@ regulator-name = "VT_CORE_1.5V"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; - gpio = <&gpe2 2 0>; + gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -93,21 +94,21 @@ compatible = "gpio-keys"; vol-down-key { - gpios = <&gpx2 1 1>; + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <114>; label = "volume down"; debounce-interval = <10>; }; vol-up-key { - gpios = <&gpx2 0 1>; + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <115>; label = "volume up"; debounce-interval = <10>; }; power-key { - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <116>; label = "power"; debounce-interval = <10>; @@ -115,7 +116,7 @@ }; ok-key { - gpios = <&gpx3 5 1>; + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; linux,code = <352>; label = "ok"; debounce-interval = <10>; @@ -218,7 +219,7 @@ compatible = "samsung,s6e8aa0"; vdd3-supply = <&vcclcd_reg>; vci-supply = <&vlcd_reg>; - reset-gpios = <&gpy4 5 0>; + reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; power-on-delay= <50>; reset-delay = <100>; init-delay = <100>; @@ -251,6 +252,7 @@ &exynos_usbphy { status = "okay"; + vbus-supply = <&safe1_sreg>; }; &fimd { @@ -304,9 +306,9 @@ max8997,pmic-ignore-gpiodvs-side-effect; max8997,pmic-buck125-default-dvs-idx = <0>; - max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>, - <&gpx0 6 0>, - <&gpl0 0 0>; + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, + <&gpx0 6 GPIO_ACTIVE_HIGH>, + <&gpl0 0 GPIO_ACTIVE_HIGH>; max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, <1250000>, <1200000>, @@ -448,7 +450,6 @@ safe1_sreg: ESAFEOUT1 { regulator-name = "SAFEOUT1"; - regulator-always-on; }; safe2_sreg: ESAFEOUT2 { diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index eb379526e234..81b7ec7b3e31 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4210.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Samsung Universal C210 based on Exynos4210 rev0"; @@ -65,7 +66,7 @@ regulator-name = "VMEM_VDD_2_8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpe1 3 0>; + gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -73,21 +74,21 @@ compatible = "gpio-keys"; vol-up-key { - gpios = <&gpx2 0 1>; + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <115>; label = "volume up"; debounce-interval = <1>; }; vol-down-key { - gpios = <&gpx2 1 1>; + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <114>; label = "volume down"; debounce-interval = <1>; }; config-key { - gpios = <&gpx2 2 1>; + gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; linux,code = <171>; label = "config"; debounce-interval = <1>; @@ -95,14 +96,14 @@ }; camera-key { - gpios = <&gpx2 3 1>; + gpios = <&gpx2 3 GPIO_ACTIVE_LOW>; linux,code = <212>; label = "camera"; debounce-interval = <1>; }; power-key { - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <116>; label = "power"; debounce-interval = <1>; @@ -110,7 +111,7 @@ }; ok-key { - gpios = <&gpx3 5 1>; + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; linux,code = <352>; label = "ok"; debounce-interval = <1>; @@ -122,7 +123,7 @@ regulator-name = "TSP_2_8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpe2 3 0>; + gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -131,17 +132,17 @@ #address-cells = <1>; #size-cells = <0>; - gpio-sck = <&gpy3 1 0>; - gpio-mosi = <&gpy3 3 0>; + gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; - cs-gpios = <&gpy4 3 0>; + cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>; lcd@0 { compatible = "samsung,ld9040"; reg = <0>; vdd3-supply = <&ldo7_reg>; vci-supply = <&ldo17_reg>; - reset-gpios = <&gpy4 5 0>; + reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; spi-max-frequency = <1200000>; spi-cpol; spi-cpha; @@ -218,13 +219,13 @@ regulator-name = "HDMI_5V"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpe0 1 0>; + gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; hdmi_ddc: i2c-ddc { compatible = "i2c-gpio"; - gpios = <&gpe4 2 0 &gpe4 3 0>; + gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>; i2c-gpio,delay-us = <100>; #address-cells = <1>; #size-cells = <0>; @@ -248,6 +249,7 @@ &exynos_usbphy { status = "okay"; + vbus-supply = <&safeout1_reg>; }; &fimd { @@ -267,7 +269,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 0>; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd>; hdmi-en-supply = <&hdmi_en>; @@ -311,7 +313,8 @@ compatible = "maxim,max8952"; reg = <0x60>; - max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>; + max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>, + <&gpx0 4 GPIO_ACTIVE_HIGH>; max8952,default-mode = <0>; max8952,dvs-mode-microvolt = <1250000>, <1200000>, <1050000>, <950000>; @@ -330,13 +333,13 @@ reg = <0x66>; max8998,pmic-buck1-default-dvs-idx = <0>; - max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>, - <&gpx0 6 0>; + max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, + <&gpx0 6 GPIO_ACTIVE_HIGH>; max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>, <1100000>, <1000000>; max8998,pmic-buck2-default-dvs-idx = <0>; - max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>; + max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>; max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>; regulators { @@ -486,7 +489,6 @@ safeout1_reg: ESAFEOUT1 { regulator-name = "SAFEOUT1"; - regulator-always-on; }; safeout2_reg: ESAFEOUT2 { @@ -551,7 +553,7 @@ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; pinctrl-names = "default"; vmmc-supply = <&ldo5_reg>; - cd-gpios = <&gpx3 4 0>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; cd-inverted; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index db52841297a5..edf0fc8db6ff 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/clock/maxim,max77686.h> #include "exynos4412.dtsi" +#include <dt-bindings/gpio/gpio.h> / { chosen { @@ -30,7 +31,7 @@ power_key { interrupt-parent = <&gpx1>; interrupts = <3 0>; - gpios = <&gpx1 3 1>; + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; debounce-interval = <10>; @@ -70,7 +71,7 @@ pinctrl-0 = <&sd1_cd>; pinctrl-names = "default"; compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpk1 2 1>; + reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>; }; camera { @@ -181,7 +182,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 0>; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd>; vdd-supply = <&ldo8_reg>; @@ -199,8 +200,6 @@ }; &i2c_0 { - pinctrl-0 = <&i2c0_bus>; - pinctrl-names = "default"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <400000>; status = "okay"; @@ -209,9 +208,9 @@ compatible = "smsc,usb3503"; reg = <0x08>; - intn-gpios = <&gpx3 0 0>; - connect-gpios = <&gpx3 4 0>; - reset-gpios = <&gpx3 5 0>; + intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; + connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>; initial-mode = <1>; }; @@ -276,15 +275,13 @@ regulator-always-on; }; - ldo8_reg: ldo@8 { - regulator-compatible = "LDO8"; + ldo8_reg: LDO8 { regulator-name = "VDD10_HDMI_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; - ldo10_reg: ldo@10 { - regulator-compatible = "LDO10"; + ldo10_reg: LDO10 { regulator-name = "VDDQ_MIPIHSI_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -424,8 +421,6 @@ }; &i2c_1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_bus>; status = "okay"; max98090: max98090@10 { compatible = "maxim,max98090"; @@ -440,8 +435,6 @@ &i2c_2 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_bus>; }; &i2c_8 { @@ -490,7 +483,7 @@ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; pinctrl-names = "default"; vmmc-supply = <&ldo4_reg &ldo21_reg>; - cd-gpios = <&gpk2 2 0>; + cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>; cd-inverted; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 8632f35c6c26..646ff0bd001a 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -27,11 +27,54 @@ compatible = "gpio-leds"; led1 { label = "led1:heart"; - gpios = <&gpc1 0 1>; + gpios = <&gpc1 0 GPIO_ACTIVE_LOW>; default-state = "on"; linux,default-trigger = "heartbeat"; }; }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 0 10000 0>; + cooling-min-state = <0>; + cooling-max-state = <3>; + #cooling-cells = <2>; + cooling-levels = <0 102 170 230>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + trip = <&cpu_alert1>; + cooling-device = <&cpu0 7 7>; + }; + map1 { + trip = <&cpu_alert2>; + cooling-device = <&cpu0 13 13>; + }; + map2 { + trip = <&cpu_alert0>; + cooling-device = <&fan0 0 1>; + }; + map3 { + trip = <&cpu_alert1>; + cooling-device = <&fan0 1 2>; + }; + map4 { + trip = <&cpu_alert2>; + cooling-device = <&fan0 2 3>; + }; + }; + }; + }; +}; + +&pwm { + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <0>; + status = "okay"; }; &usb3503 { diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 679ac103ebf6..b44bb682e976 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -26,13 +26,13 @@ compatible = "gpio-leds"; led1 { label = "led1:heart"; - gpios = <&gpc1 0 1>; + gpios = <&gpc1 0 GPIO_ACTIVE_LOW>; default-state = "on"; linux,default-trigger = "heartbeat"; }; led2 { label = "led2:mmc0"; - gpios = <&gpc1 2 1>; + gpios = <&gpc1 2 GPIO_ACTIVE_LOW>; default-state = "on"; linux,default-trigger = "mmc0"; }; @@ -44,7 +44,7 @@ home_key { interrupt-parent = <&gpx2>; interrupts = <2 0>; - gpios = <&gpx2 2 0>; + gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; linux,code = <KEY_HOME>; label = "home key"; debounce-interval = <10>; @@ -57,7 +57,7 @@ regulator-name = "p3v3_en"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpa1 1 1>; + gpio = <&gpa1 1 GPIO_ACTIVE_LOW>; enable-active-high; regulator-always-on; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 9d528af68c1a..c8d86af2fb98 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4412.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { @@ -45,7 +46,7 @@ regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 0>; + gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -107,13 +108,13 @@ s5m8767,pmic-buck-default-dvs-idx = <3>; - s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>, - <&gpx2 4 0>, - <&gpx2 5 0>; + s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>, + <&gpx2 4 GPIO_ACTIVE_HIGH>, + <&gpx2 5 GPIO_ACTIVE_HIGH>; - s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>, - <&gpm3 6 0>, - <&gpm3 7 0>; + s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>, + <&gpm3 6 GPIO_ACTIVE_HIGH>, + <&gpm3 7 GPIO_ACTIVE_HIGH>; s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>, <1200000>, <1200000>, diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts index 525684ca8dc0..4840bbdaa9ec 100644 --- a/arch/arm/boot/dts/exynos4412-tiny4412.dts +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts @@ -13,6 +13,7 @@ /dts-v1/; #include "exynos4412.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "FriendlyARM TINY4412 board based on Exynos4412"; @@ -31,26 +32,26 @@ led1 { label = "led1"; - gpios = <&gpm4 0 1>; + gpios = <&gpm4 0 GPIO_ACTIVE_LOW>; default-state = "off"; linux,default-trigger = "heartbeat"; }; led2 { label = "led2"; - gpios = <&gpm4 1 1>; + gpios = <&gpm4 1 GPIO_ACTIVE_LOW>; default-state = "off"; }; led3 { label = "led3"; - gpios = <&gpm4 2 1>; + gpios = <&gpm4 2 GPIO_ACTIVE_LOW>; default-state = "off"; }; led4 { label = "led4"; - gpios = <&gpm4 3 1>; + gpios = <&gpm4 3 GPIO_ACTIVE_LOW>; default-state = "off"; linux,default-trigger = "mmc0"; }; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 2a1ebb76ebe0..40a474c4374b 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -65,7 +65,7 @@ regulator-name = "CAM_SENSOR_A"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpm0 2 0>; + gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -74,7 +74,7 @@ regulator-name = "LCD_VDD_2.2V"; regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; - gpio = <&gpc0 1 0>; + gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -83,7 +83,7 @@ regulator-name = "CAM_AF"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpm0 4 0>; + gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -92,7 +92,7 @@ regulator-name = "LED_A_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - gpio = <&gpj0 5 0>; + gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -101,21 +101,21 @@ compatible = "gpio-keys"; key-down { - gpios = <&gpx3 3 1>; + gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; linux,code = <114>; label = "volume down"; debounce-interval = <10>; }; key-up { - gpios = <&gpx2 2 1>; + gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; linux,code = <115>; label = "volume up"; debounce-interval = <10>; }; key-power { - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <116>; label = "power"; debounce-interval = <10>; @@ -123,7 +123,7 @@ }; key-ok { - gpios = <&gpx0 1 1>; + gpios = <&gpx0 1 GPIO_ACTIVE_LOW>; linux,code = <139>; label = "ok"; debounce-inteval = <10>; @@ -198,7 +198,7 @@ i2c_ak8975: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpy2 4 0>, <&gpy2 5 0>; + gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; @@ -207,13 +207,13 @@ ak8975@0c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; - gpios = <&gpj0 7 0>; + gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; }; }; i2c_cm36651: i2c-gpio-2 { compatible = "i2c-gpio"; - gpios = <&gpf0 0 1>, <&gpf0 1 1>; + gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; @@ -359,7 +359,7 @@ reg = <0>; vdd3-supply = <&lcd_vdd3_reg>; vci-supply = <&ldo25_reg>; - reset-gpios = <&gpy4 5 0>; + reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; power-on-delay= <50>; reset-delay = <100>; init-delay = <100>; @@ -391,6 +391,7 @@ }; &exynos_usbphy { + vbus-supply = <&esafeout1_reg>; status = "okay"; }; @@ -446,7 +447,7 @@ clocks = <&camera 1>; clock-names = "extclk"; samsung,camclk-out = <1>; - gpios = <&gpm1 6 0>; + gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>; port { is_s5k6a3_ep: endpoint { @@ -488,8 +489,8 @@ s5c73m3@3c { compatible = "samsung,s5c73m3"; reg = <0x3c>; - standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */ - xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */ + standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ + xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ vdd-int-supply = <&buck9_reg>; vddio-cis-supply = <&ldo9_reg>; vdda-supply = <&ldo17_reg>; @@ -564,16 +565,14 @@ #clock-cells = <1>; voltage-regulators { - ldo1_reg: ldo1 { - regulator-compatible = "LDO1"; + ldo1_reg: LDO1 { regulator-name = "VALIVE_1.0V_AP"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - ldo2_reg: ldo2 { - regulator-compatible = "LDO2"; + ldo2_reg: LDO2 { regulator-name = "VM1M2_1.2V_AP"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -583,32 +582,28 @@ }; }; - ldo3_reg: ldo3 { - regulator-compatible = "LDO3"; + ldo3_reg: LDO3 { regulator-name = "VCC_1.8V_AP"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - ldo4_reg: ldo4 { - regulator-compatible = "LDO4"; + ldo4_reg: LDO4 { regulator-name = "VCC_2.8V_AP"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; - ldo5_reg: ldo5 { - regulator-compatible = "LDO5"; + ldo5_reg: LDO5 { regulator-name = "VCC_1.8V_IO"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - ldo6_reg: ldo6 { - regulator-compatible = "LDO6"; + ldo6_reg: LDO6 { regulator-name = "VMPLL_1.0V_AP"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -618,8 +613,7 @@ }; }; - ldo7_reg: ldo7 { - regulator-compatible = "LDO7"; + ldo7_reg: LDO7 { regulator-name = "VPLL_1.0V_AP"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -629,8 +623,7 @@ }; }; - ldo8_reg: ldo8 { - regulator-compatible = "LDO8"; + ldo8_reg: LDO8 { regulator-name = "VMIPI_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -639,15 +632,13 @@ }; }; - ldo9_reg: ldo9 { - regulator-compatible = "LDO9"; + ldo9_reg: LDO9 { regulator-name = "CAM_ISP_MIPI_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - ldo10_reg: ldo10 { - regulator-compatible = "LDO10"; + ldo10_reg: LDO10 { regulator-name = "VMIPI_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -656,8 +647,7 @@ }; }; - ldo11_reg: ldo11 { - regulator-compatible = "LDO11"; + ldo11_reg: LDO11 { regulator-name = "VABB1_1.95V"; regulator-min-microvolt = <1950000>; regulator-max-microvolt = <1950000>; @@ -667,8 +657,7 @@ }; }; - ldo12_reg: ldo12 { - regulator-compatible = "LDO12"; + ldo12_reg: LDO12 { regulator-name = "VUOTG_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; @@ -677,15 +666,13 @@ }; }; - ldo13_reg: ldo13 { - regulator-compatible = "LDO13"; + ldo13_reg: LDO13 { regulator-name = "NFC_AVDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - ldo14_reg: ldo14 { - regulator-compatible = "LDO14"; + ldo14_reg: LDO14 { regulator-name = "VABB2_1.95V"; regulator-min-microvolt = <1950000>; regulator-max-microvolt = <1950000>; @@ -695,8 +682,7 @@ }; }; - ldo15_reg: ldo15 { - regulator-compatible = "LDO15"; + ldo15_reg: LDO15 { regulator-name = "VHSIC_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -705,8 +691,7 @@ }; }; - ldo16_reg: ldo16 { - regulator-compatible = "LDO16"; + ldo16_reg: LDO16 { regulator-name = "VHSIC_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -715,80 +700,69 @@ }; }; - ldo17_reg: ldo17 { - regulator-compatible = "LDO17"; + ldo17_reg: LDO17 { regulator-name = "CAM_SENSOR_CORE_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - ldo18_reg: ldo18 { - regulator-compatible = "LDO18"; + ldo18_reg: LDO18 { regulator-name = "CAM_ISP_SEN_IO_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - ldo19_reg: ldo19 { - regulator-compatible = "LDO19"; + ldo19_reg: LDO19 { regulator-name = "VT_CAM_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - ldo20_reg: ldo20 { - regulator-compatible = "LDO20"; + ldo20_reg: LDO20 { regulator-name = "VDDQ_PRE_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - ldo21_reg: ldo21 { - regulator-compatible = "LDO21"; + ldo21_reg: LDO21 { regulator-name = "VTF_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; }; - ldo22_reg: ldo22 { - regulator-compatible = "LDO22"; + ldo22_reg: LDO22 { regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; - ldo23_reg: ldo23 { - regulator-compatible = "LDO23"; + ldo23_reg: LDO23 { regulator-name = "TSP_AVDD_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo24_reg: ldo24 { - regulator-compatible = "LDO24"; + ldo24_reg: LDO24 { regulator-name = "TSP_VDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - ldo25_reg: ldo25 { - regulator-compatible = "LDO25"; + ldo25_reg: LDO25 { regulator-name = "LCD_VCC_3.3V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; - ldo26_reg: ldo26 { - regulator-compatible = "LDO26"; + ldo26_reg: LDO26 { regulator-name = "MOTOR_VCC_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; - buck1_reg: buck1 { - regulator-compatible = "BUCK1"; + buck1_reg: BUCK1 { regulator-name = "vdd_mif"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1100000>; @@ -799,8 +773,7 @@ }; }; - buck2_reg: buck2 { - regulator-compatible = "BUCK2"; + buck2_reg: BUCK2 { regulator-name = "vdd_arm"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1500000>; @@ -811,8 +784,7 @@ }; }; - buck3_reg: buck3 { - regulator-compatible = "BUCK3"; + buck3_reg: BUCK3 { regulator-name = "vdd_int"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; @@ -823,8 +795,7 @@ }; }; - buck4_reg: buck4 { - regulator-compatible = "BUCK4"; + buck4_reg: BUCK4 { regulator-name = "vdd_g3d"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; @@ -834,40 +805,35 @@ }; }; - buck5_reg: buck5 { - regulator-compatible = "BUCK5"; + buck5_reg: BUCK5 { regulator-name = "VMEM_1.2V_AP"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - buck6_reg: buck6 { - regulator-compatible = "BUCK6"; + buck6_reg: BUCK6 { regulator-name = "VCC_SUB_1.35V"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; }; - buck7_reg: buck7 { - regulator-compatible = "BUCK7"; + buck7_reg: BUCK7 { regulator-name = "VCC_SUB_2.0V"; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; regulator-always-on; }; - buck8_reg: buck8 { - regulator-compatible = "BUCK8"; + buck8_reg: BUCK8 { regulator-name = "VMEM_VDDF_3.0V"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; - buck9_reg: buck9 { - regulator-compatible = "BUCK9"; + buck9_reg: BUCK9 { regulator-name = "CAM_ISP_CORE_1.2V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1200000>; @@ -1276,7 +1242,7 @@ &sdhci_2 { bus-width = <4>; - cd-gpios = <&gpx3 4 0>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; cd-inverted; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; pinctrl-names = "default"; @@ -1303,7 +1269,7 @@ &spi_1 { pinctrl-names = "default"; pinctrl-0 = <&spi1_bus>; - cs-gpios = <&gpb 5 0>; + cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; status = "okay"; s5c73m3_spi: s5c73m3 { diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index db3f65f3eb45..c000532c1444 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -129,10 +129,6 @@ samsung,color-depth = <1>; samsung,link-rate = <0x0a>; samsung,lane-count = <4>; -}; - -&fimd { - status = "okay"; display-timings { native-mode = <&timing0>; @@ -152,6 +148,10 @@ }; }; +&fimd { + status = "okay"; +}; + &hdmi { hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>; vdd_osc-supply = <&ldo10_reg>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index c625e71217aa..0f5dcd418af8 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -89,14 +89,6 @@ pinctrl-names = "default"; pinctrl-0 = <&dp_hpd>; status = "okay"; -}; - -&ehci { - samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; -}; - -&fimd { - status = "okay"; display-timings { native-mode = <&timing0>; @@ -116,6 +108,14 @@ }; }; +&ehci { + samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; +}; + +&fimd { + status = "okay"; +}; + &hdmi { hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi new file mode 100644 index 000000000000..0a7f408824d8 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -0,0 +1,684 @@ +/* + * Google Snow board device tree source + * + * Copyright (c) 2012 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/maxim,max77686.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> +#include "exynos5250.dtsi" + +/ { + aliases { + i2c104 = &i2c_104; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "console=tty1"; + stdout-path = "serial3:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&power_key_irq &lid_irq>; + + power { + label = "Power"; + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + + lid-switch { + label = "Lid"; + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; + + vbat: vbat-fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "vbat-supply"; + regulator-boot-on; + }; + + i2c-arbitrator { + compatible = "i2c-arb-gpio-challenge"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@12CA0000}>; + + our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>; + their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; + slew-delay-us = <10>; + wait-retry-us = <3000>; + wait-free-us = <50000>; + + pinctrl-names = "default"; + pinctrl-0 = <&arb_our_claim &arb_their_claim>; + + /* Use ID 104 as a hint that we're on physical bus 4 */ + i2c_104: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,poll-retry-count = <1>; + }; + + cros_ec: embedded-controller { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 IRQ_TYPE_NONE>; + interrupt-parent = <&gpx1>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_irq>; + wakeup-source; + }; + + power-regulator { + compatible = "ti,tps65090"; + reg = <0x48>; + + /* + * Config irq to disable internal pulls + * even though we run in polling mode. + */ + pinctrl-names = "default"; + pinctrl-0 = <&tps65090_irq>; + + vsys1-supply = <&vbat>; + vsys2-supply = <&vbat>; + vsys3-supply = <&vbat>; + infet1-supply = <&vbat>; + infet2-supply = <&vbat>; + infet3-supply = <&vbat>; + infet4-supply = <&vbat>; + infet5-supply = <&vbat>; + infet6-supply = <&vbat>; + infet7-supply = <&vbat>; + vsys-l1-supply = <&vbat>; + vsys-l2-supply = <&vbat>; + + regulators { + dcdc1 { + ti,enable-ext-control; + }; + dcdc2 { + ti,enable-ext-control; + }; + dcdc3 { + ti,enable-ext-control; + }; + fet1: fet1 { + regulator-name = "vcd_led"; + ti,overcurrent-wait = <3>; + }; + tps65090_fet2: fet2 { + regulator-name = "video_mid"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet3 { + regulator-name = "wwan_r"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet4 { + regulator-name = "sdcard"; + ti,overcurrent-wait = <3>; + }; + fet5 { + regulator-name = "camout"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet6: fet6 { + regulator-name = "lcd_vdd"; + ti,overcurrent-wait = <3>; + }; + tps65090_fet7: fet7 { + regulator-name = "video_mid_1a"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + ldo1 { + }; + ldo2 { + }; + }; + + charger { + compatible = "ti,tps65090-charger"; + }; + }; + }; + }; + + sound { + samsung,i2s-controller = <&i2s0>; + }; + + usb3_vbus_reg: regulator-usb3 { + compatible = "regulator-fixed"; + regulator-name = "P5.0V_USB3CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_en>; + enable-active-high; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; + power-supply = <&fet1>; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + }; + + panel: panel { + compatible = "auo,b116xw03"; + power-supply = <&fet6>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; + + mmc3_pwrseq: mmc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */ + <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */ + clocks = <&max77686 MAX77686_CLK_PMIC>; + clock-names = "ext_clock"; + }; +}; + +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; + + ports { + port@0 { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; +}; + +&ehci { + samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; +}; + +&fimd { + status = "okay"; + samsung,invert-vclk; +}; + +&hdmi { + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + phy = <&hdmiphy>; + ddc = <&i2c_2>; + hdmi-en-supply = <&tps65090_fet7>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; +}; + +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + max77686: max77686@09 { + compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; + wakeup-source; + reg = <0x09>; + #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "P1.0V_LDO_OUT1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "P1.8V_LDO_OUT2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "P1.8V_LDO_OUT3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "P1.1V_LDO_OUT7"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "P1.0V_LDO_OUT8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "P1.8V_LDO_OUT10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "P3.0V_LDO_OUT12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "P1.8V_LDO_OUT14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "P1.0V_LDO_OUT15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "P1.8V_LDO_OUT16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "P1.8V_BUCK_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "P1.35V_BUCK_OUT6"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "P2.0V_BUCK_OUT7"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "P2.85V_BUCK_OUT8"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c_1 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + trackpad { + reg = <0x67>; + compatible = "cypress,cyapa"; + interrupts = <2 IRQ_TYPE_NONE>; + interrupt-parent = <&gpx1>; + wakeup-source; + }; +}; + +/* + * Disabled pullups since external part has its own pullups and + * double-pulling gets us out of spec in some cases. + */ +&i2c2_bus { + samsung,pin-pud = <0>; +}; + +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; +}; + +&i2c_3 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_4 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_5 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_7 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + ptn3460: lvds-bridge@20 { + compatible = "nxp,ptn3460"; + reg = <0x20>; + powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; + edid-emulation = <5>; + + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; + }; +}; + +&i2c_8 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + hdmiphy: hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + bus-width = <4>; + wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>; + cap-sd-highspeed; +}; + +/* + * On Snow we've got SIP WiFi and so can keep drive strengths low to + * reduce EMI. + */ +&mmc_3 { + status = "okay"; + num-slots = <1>; + broken-cd; + cap-sdio-irq; + keep-power-in-suspend; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>; + bus-width = <4>; + cap-sd-highspeed; + mmc-pwrseq = <&mmc3_pwrseq>; +}; + +&pinctrl_0 { + wifi_en: wifi-en { + samsung,pins = "gpx0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + wifi_rst: wifi-rst { + samsung,pins = "gpx0-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + power_key_irq: power-key-irq { + samsung,pins = "gpx1-3"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ec_irq: ec-irq { + samsung,pins = "gpx1-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + tps65090_irq: tps65090-irq { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb3_vbus_en: usb3-vbus-en { + samsung,pins = "gpx2-7"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lid_irq: lid-irq { + samsung,pins = "gpx3-5"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + arb_their_claim: arb-their-claim { + samsung,pins = "gpe0-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + arb_our_claim: arb-our-claim { + samsung,pins = "gpf0-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; + +&sd3_bus4 { + samsung,pin-drv = <0>; +}; + +&sd3_clk { + samsung,pin-drv = <0>; +}; + +&sd3_cmd { + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; +}; + +&spi_1 { + status = "okay"; + samsung,spi-src-clk = <0>; + num-cs = <1>; + cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>; +}; + +&usbdrd_dwc3 { + dr_mode = "host"; +}; + +&usbdrd_phy { + vbus-supply = <&usb3_vbus_reg>; +}; + +#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts new file mode 100644 index 000000000000..f811dc800660 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts @@ -0,0 +1,47 @@ +/* + * Google Snow Rev 5+ board device tree source + * + * Copyright (c) 2012 Google, Inc + * Copyright (c) 2015 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "exynos5250-snow-common.dtsi" + +/ { + model = "Google Snow Rev 5+"; + compatible = "google,snow-rev5", "samsung,exynos5250", + "samsung,exynos5"; + + sound { + compatible = "google,snow-audio-max98090"; + + samsung,model = "Snow-I2S-MAX98090"; + samsung,audio-codec = <&max98090>; + }; +}; + +&i2c_7 { + max98090: codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupts = <4 IRQ_TYPE_NONE>; + interrupt-parent = <&gpx0>; + pinctrl-names = "default"; + pinctrl-0 = <&max98090_irq>; + }; +}; + +&pinctrl_0 { + max98090_irq: max98090-irq { + samsung,pins = "gpx0-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 0720caab5511..995c7ce6c12b 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -9,698 +9,35 @@ */ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clock/maxim,max77686.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/input/input.h> -#include "exynos5250.dtsi" +#include "exynos5250-snow-common.dtsi" / { model = "Google Snow"; - compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5"; - - aliases { - i2c104 = &i2c_104; - }; - - memory { - reg = <0x40000000 0x80000000>; - }; - - chosen { - bootargs = "console=tty1"; - stdout-path = "serial3:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&power_key_irq &lid_irq>; - - power { - label = "Power"; - gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - gpio-key,wakeup; - }; - - lid-switch { - label = "Lid"; - gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; - linux,input-type = <5>; /* EV_SW */ - linux,code = <0>; /* SW_LID */ - debounce-interval = <1>; - gpio-key,wakeup; - }; - }; - - vbat: vbat-fixed-regulator { - compatible = "regulator-fixed"; - regulator-name = "vbat-supply"; - regulator-boot-on; - }; - - i2c-arbitrator { - compatible = "i2c-arb-gpio-challenge"; - #address-cells = <1>; - #size-cells = <0>; - - i2c-parent = <&{/i2c@12CA0000}>; - - our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>; - their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; - slew-delay-us = <10>; - wait-retry-us = <3000>; - wait-free-us = <50000>; - - pinctrl-names = "default"; - pinctrl-0 = <&arb_our_claim &arb_their_claim>; - - /* Use ID 104 as a hint that we're on physical bus 4 */ - i2c_104: i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - battery: sbs-battery@b { - compatible = "sbs,sbs-battery"; - reg = <0xb>; - sbs,poll-retry-count = <1>; - }; - - cros_ec: embedded-controller { - compatible = "google,cros-ec-i2c"; - reg = <0x1e>; - interrupts = <6 IRQ_TYPE_NONE>; - interrupt-parent = <&gpx1>; - pinctrl-names = "default"; - pinctrl-0 = <&ec_irq>; - wakeup-source; - }; - - power-regulator { - compatible = "ti,tps65090"; - reg = <0x48>; - - /* - * Config irq to disable internal pulls - * even though we run in polling mode. - */ - pinctrl-names = "default"; - pinctrl-0 = <&tps65090_irq>; - - vsys1-supply = <&vbat>; - vsys2-supply = <&vbat>; - vsys3-supply = <&vbat>; - infet1-supply = <&vbat>; - infet2-supply = <&vbat>; - infet3-supply = <&vbat>; - infet4-supply = <&vbat>; - infet5-supply = <&vbat>; - infet6-supply = <&vbat>; - infet7-supply = <&vbat>; - vsys-l1-supply = <&vbat>; - vsys-l2-supply = <&vbat>; - - regulators { - dcdc1 { - ti,enable-ext-control; - }; - dcdc2 { - ti,enable-ext-control; - }; - dcdc3 { - ti,enable-ext-control; - }; - fet1: fet1 { - regulator-name = "vcd_led"; - ti,overcurrent-wait = <3>; - }; - tps65090_fet2: fet2 { - regulator-name = "video_mid"; - regulator-always-on; - ti,overcurrent-wait = <3>; - }; - fet3 { - regulator-name = "wwan_r"; - regulator-always-on; - ti,overcurrent-wait = <3>; - }; - fet4 { - regulator-name = "sdcard"; - ti,overcurrent-wait = <3>; - }; - fet5 { - regulator-name = "camout"; - regulator-always-on; - ti,overcurrent-wait = <3>; - }; - fet6: fet6 { - regulator-name = "lcd_vdd"; - ti,overcurrent-wait = <3>; - }; - tps65090_fet7: fet7 { - regulator-name = "video_mid_1a"; - regulator-always-on; - ti,overcurrent-wait = <3>; - }; - ldo1 { - }; - ldo2 { - }; - }; - - charger { - compatible = "ti,tps65090-charger"; - }; - }; - }; - }; + compatible = "google,snow-rev4", "google,snow", "samsung,exynos5250", + "samsung,exynos5"; sound { compatible = "google,snow-audio-max98095"; samsung,model = "Snow-I2S-MAX98095"; - samsung,i2s-controller = <&i2s0>; samsung,audio-codec = <&max98095>; }; - - usb3_vbus_reg: regulator-usb3 { - compatible = "regulator-fixed"; - regulator-name = "P5.0V_USB3CON"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_en>; - enable-active-high; - }; - - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <24000000>; - }; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 1000000 0>; - brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; - default-brightness-level = <7>; - enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; - power-supply = <&fet1>; - pinctrl-0 = <&pwm0_out>; - pinctrl-names = "default"; - }; - - panel: panel { - compatible = "auo,b116xw03"; - power-supply = <&fet6>; - backlight = <&backlight>; - - port { - panel_in: endpoint { - remote-endpoint = <&bridge_out>; - }; - }; - }; - - mmc3_pwrseq: mmc3_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */ - <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */ - clocks = <&max77686 MAX77686_CLK_PMIC>; - clock-names = "ext_clock"; - }; -}; - -&cpu0 { - cpu0-supply = <&buck2_reg>; -}; - -&dp { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&dp_hpd>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; - - ports { - port@0 { - dp_out: endpoint { - remote-endpoint = <&bridge_in>; - }; - }; - }; -}; - -&ehci { - samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; -}; - -&fimd { - status = "okay"; - samsung,invert-vclk; -}; - -&hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd_irq>; - phy = <&hdmiphy>; - ddc = <&i2c_2>; - hdmi-en-supply = <&tps65090_fet7>; - vdd-supply = <&ldo8_reg>; - vdd_osc-supply = <&ldo10_reg>; - vdd_pll-supply = <&ldo8_reg>; -}; - -&i2c_0 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <378000>; - - max77686: max77686@09 { - compatible = "maxim,max77686"; - interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_NONE>; - pinctrl-names = "default"; - pinctrl-0 = <&max77686_irq>; - wakeup-source; - reg = <0x09>; - #clock-cells = <1>; - - voltage-regulators { - ldo1_reg: LDO1 { - regulator-name = "P1.0V_LDO_OUT1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "P1.8V_LDO_OUT2"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "P1.8V_LDO_OUT3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "P1.1V_LDO_OUT7"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo8_reg: LDO8 { - regulator-name = "P1.0V_LDO_OUT8"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "P1.8V_LDO_OUT10"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo12_reg: LDO12 { - regulator-name = "P3.0V_LDO_OUT12"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo14_reg: LDO14 { - regulator-name = "P1.8V_LDO_OUT14"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo15_reg: LDO15 { - regulator-name = "P1.0V_LDO_OUT15"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo16_reg: LDO16 { - regulator-name = "P1.8V_LDO_OUT16"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck5_reg: BUCK5 { - regulator-name = "P1.8V_BUCK_OUT5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "P1.35V_BUCK_OUT6"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "P2.0V_BUCK_OUT7"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "P2.85V_BUCK_OUT8"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - regulator-always-on; - }; - }; - }; -}; - -&i2c_1 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <378000>; - - trackpad { - reg = <0x67>; - compatible = "cypress,cyapa"; - interrupts = <2 IRQ_TYPE_NONE>; - interrupt-parent = <&gpx1>; - wakeup-source; - }; -}; - -/* - * Disabled pullups since external part has its own pullups and - * double-pulling gets us out of spec in some cases. - */ -&i2c2_bus { - samsung,pin-pud = <0>; -}; - -&i2c_2 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; -}; - -&i2c_3 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; -}; - -&i2c_4 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; -}; - -&i2c_5 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; }; &i2c_7 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - - ptn3460: lvds-bridge@20 { - compatible = "nxp,ptn3460"; - reg = <0x20>; - powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; - edid-emulation = <5>; - - ports { - port@0 { - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - - port@1 { - bridge_in: endpoint { - remote-endpoint = <&dp_out>; - }; - }; - }; - }; - max98095: codec@11 { compatible = "maxim,max98095"; reg = <0x11>; - pinctrl-0 = <&max98095_en>; pinctrl-names = "default"; + pinctrl-0 = <&max98095_en>; }; }; -&i2c_8 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <378000>; - - hdmiphy: hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; -}; - -&i2s0 { - status = "okay"; -}; - -&mmc_0 { - status = "okay"; - num-slots = <1>; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; - bus-width = <8>; - cap-mmc-highspeed; -}; - -&mmc_2 { - status = "okay"; - num-slots = <1>; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - bus-width = <4>; - wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>; - cap-sd-highspeed; -}; - -/* - * On Snow we've got SIP WiFi and so can keep drive strengths low to - * reduce EMI. - */ -&mmc_3 { - status = "okay"; - num-slots = <1>; - broken-cd; - cap-sdio-irq; - keep-power-in-suspend; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>; - bus-width = <4>; - cap-sd-highspeed; - mmc-pwrseq = <&mmc3_pwrseq>; -}; - &pinctrl_0 { - wifi_en: wifi-en { - samsung,pins = "gpx0-1"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - wifi_rst: wifi-rst { - samsung,pins = "gpx0-2"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - power_key_irq: power-key-irq { - samsung,pins = "gpx1-3"; - samsung,pin-function = <0xf>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - ec_irq: ec-irq { - samsung,pins = "gpx1-6"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - max98095_en: max98095-en { samsung,pins = "gpx1-7"; samsung,pin-function = <0>; samsung,pin-pud = <3>; samsung,pin-drv = <0>; }; - - tps65090_irq: tps65090-irq { - samsung,pins = "gpx2-6"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - usb3_vbus_en: usb3-vbus-en { - samsung,pins = "gpx2-7"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - max77686_irq: max77686-irq { - samsung,pins = "gpx3-2"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - lid_irq: lid-irq { - samsung,pins = "gpx3-5"; - samsung,pin-function = <0xf>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - hdmi_hpd_irq: hdmi-hpd-irq { - samsung,pins = "gpx3-7"; - samsung,pin-function = <0>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; - }; -}; - -&pinctrl_1 { - arb_their_claim: arb-their-claim { - samsung,pins = "gpe0-4"; - samsung,pin-function = <0>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - arb_our_claim: arb-our-claim { - samsung,pins = "gpf0-3"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; }; - -&rtc { - status = "okay"; - clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; - clock-names = "rtc", "rtc_src"; -}; - -&sd3_bus4 { - samsung,pin-drv = <0>; -}; - -&sd3_clk { - samsung,pin-drv = <0>; -}; - -&sd3_cmd { - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; -}; - -&spi_1 { - status = "okay"; - samsung,spi-src-clk = <0>; - num-cs = <1>; - cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>; -}; - -&usbdrd_dwc3 { - dr_mode = "host"; -}; - -&usbdrd_phy { - vbus-supply = <&usb3_vbus_reg>; -}; - -#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index b24610ea8c2a..88b9cf5f226f 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -130,6 +130,10 @@ compatible = "samsung,exynos4210-pd"; reg = <0x100440A0 0x20>; #power-domain-cells = <0>; + clocks = <&clock CLK_FIN_PLL>, + <&clock CLK_MOUT_ACLK200_DISP1_SUB>, + <&clock CLK_MOUT_ACLK300_DISP1_SUB>; + clock-names = "oscclk", "clk0", "clk1"; }; clock: clock-controller@10010000 { diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index eeb4ac22cfce..4ecef6981d5c 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5420.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include <dt-bindings/clock/samsung,s2mps11.h> @@ -44,7 +45,7 @@ wakeup { label = "SW-TACT1"; - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 1b95da79293c..72ba6f032ed7 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -94,7 +94,7 @@ regulator-name = "P5.0V_USB3CON0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gph0 0 0>; + gpio = <&gph0 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb300_vbus_en>; enable-active-high; @@ -105,7 +105,7 @@ regulator-name = "P5.0V_USB3CON1"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gph0 1 0>; + gpio = <&gph0 1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb301_vbus_en>; enable-active-high; @@ -153,7 +153,7 @@ samsung,color-depth = <1>; samsung,link-rate = <0x06>; samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx2 6 0>; + samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; ports { port@0 { @@ -930,7 +930,7 @@ status = "okay"; num-cs = <1>; samsung,spi-src-clk = <0>; - cs-gpios = <&gpb1 2 0>; + cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>; cros_ec: cros-ec@0 { compatible = "google,cros-ec-spi"; @@ -940,6 +940,7 @@ pinctrl-0 = <&ec_spi_cs &ec_irq>; reg = <0>; spi-max-frequency = <3125000>; + google,has-vbc-nvram; controller-data { samsung,spi-feedback-delay = <1>; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 98871f972c8a..ac35aefd320f 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5420.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Samsung SMDK5420 board based on EXYNOS5420"; @@ -69,7 +70,7 @@ regulator-name = "VBUS0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpg0 5 0>; + gpio = <&gpg0 5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb300_vbus_en>; enable-active-high; @@ -80,7 +81,7 @@ regulator-name = "VBUS1"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpg1 4 0>; + gpio = <&gpg1 4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb301_vbus_en>; enable-active-high; @@ -98,10 +99,7 @@ samsung,link-rate = <0x0a>; samsung,lane-count = <4>; status = "okay"; -}; -&fimd { - status = "okay"; display-timings { native-mode = <&timing0>; timing0: timing@0 { @@ -118,9 +116,13 @@ }; }; +&fimd { + status = "okay"; +}; + &hdmi { status = "okay"; - hpd-gpio = <&gpx3 7 0>; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi new file mode 100644 index 000000000000..9493923ec652 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -0,0 +1,61 @@ +/* + * Hardkernel Odroid XU3 Audio Codec device tree source + * + * Copyright (c) 2015 Krzysztof Kozlowski + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + sound: sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "Odroid-XU3"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Speakers", "Speakers"; + simple-audio-card,routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "Headphone Jack", "MICBIAS", + "IN1", "Headphone Jack", + "Speakers", "SPKL", + "Speakers", "SPKR"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&link0_codec>; + simple-audio-card,frame-master = <&link0_codec>; + + simple-audio-card,cpu { + sound-dai = <&i2s0 0>; + system-clock-frequency = <19200000>; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = <&max98090>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + }; + }; +}; + +&hsi2c_5 { + status = "okay"; + max98090: max98090@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; + +&i2s0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 3b43e57845ae..1af5bdc2bdb1 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -43,71 +43,7 @@ pinctrl-0 = <&emmc_nrst_pin>; pinctrl-names = "default"; compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpd1 0 1>; - }; - - pwmleds { - compatible = "pwm-leds"; - - greenled { - label = "green:mmc0"; - pwms = <&pwm 1 2000000 0>; - pwm-names = "pwm1"; - /* - * Green LED is much brighter than the others - * so limit its max brightness - */ - max_brightness = <127>; - linux,default-trigger = "mmc0"; - }; - - blueled { - label = "blue:heartbeat"; - pwms = <&pwm 2 2000000 0>; - pwm-names = "pwm2"; - max_brightness = <255>; - linux,default-trigger = "heartbeat"; - }; - }; - - gpioleds { - compatible = "gpio-leds"; - redled { - label = "red:microSD"; - gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "mmc1"; - }; - }; - - sound: sound { - compatible = "simple-audio-card"; - - simple-audio-card,name = "Odroid-XU3"; - simple-audio-card,widgets = - "Headphone", "Headphone Jack", - "Speakers", "Speakers"; - simple-audio-card,routing = - "Headphone Jack", "HPL", - "Headphone Jack", "HPR", - "Headphone Jack", "MICBIAS", - "IN1", "Headphone Jack", - "Speakers", "SPKL", - "Speakers", "SPKR"; - - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&link0_codec>; - simple-audio-card,frame-master = <&link0_codec>; - - simple-audio-card,cpu { - sound-dai = <&i2s0 0>; - system-clock-frequency = <19200000>; - }; - - link0_codec: simple-audio-card,codec { - sound-dai = <&max98090>; - clocks = <&i2s0 CLK_I2S_CDCLK>; - }; + reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>; }; fan0: pwm-fan { @@ -138,7 +74,7 @@ &hdmi { status = "okay"; - hpd-gpio = <&gpx3 7 0>; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; @@ -160,6 +96,7 @@ s2mps11,buck2-ramp-enable = <1>; s2mps11,buck3-ramp-enable = <1>; s2mps11,buck4-ramp-enable = <1>; + samsung,s2mps11-acokb-ground; interrupt-parent = <&gpx0>; interrupts = <4 IRQ_TYPE_EDGE_FALLING>; @@ -375,19 +312,6 @@ }; }; -&hsi2c_5 { - status = "okay"; - max98090: max98090@10 { - compatible = "maxim,max98090"; - reg = <0x10>; - interrupt-parent = <&gpx3>; - interrupts = <2 0>; - clocks = <&i2s0 CLK_I2S_CDCLK>; - clock-names = "mclk"; - #sound-dai-cells = <0>; - }; -}; - &i2c_2 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; @@ -399,10 +323,6 @@ }; }; -&i2s0 { - status = "okay"; -}; - &mfc { samsung,mfc-r = <0x43000000 0x800000>; samsung,mfc-l = <0x51000000 0x800000>; @@ -463,18 +383,6 @@ }; }; -&pwm { - /* - * PWM 0 -- fan - * PWM 1 -- Green LED - * PWM 2 -- Blue LED - * PWM 3 -- on MIPI connector for backlight - */ - pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; - pinctrl-names = "default"; - status = "okay"; -}; - &tmu_cpu0 { vtmu-supply = <&ldo7_reg>; status = "okay"; @@ -510,9 +418,7 @@ dr_mode = "host"; }; -&usbdrd_dwc3_1 { - dr_mode = "otg"; -}; +/* usbdrd_dwc3_1 mode customized in each board */ &usbdrd3_0 { vdd33-supply = <&ldo9_reg>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts index c06882bbb822..b1b36081f343 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -13,8 +13,59 @@ /dts-v1/; #include "exynos5422-odroidxu3-common.dtsi" +#include "exynos5422-odroidxu3-audio.dtsi" / { model = "Hardkernel Odroid XU3 Lite"; compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5"; + + pwmleds { + compatible = "pwm-leds"; + + greenled { + label = "green:mmc0"; + pwms = <&pwm 1 2000000 0>; + pwm-names = "pwm1"; + /* + * Green LED is much brighter than the others + * so limit its max brightness + */ + max_brightness = <127>; + linux,default-trigger = "mmc0"; + }; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpioleds { + compatible = "gpio-leds"; + redled { + label = "red:microSD"; + gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc1"; + }; + }; +}; + +&pwm { + /* + * PWM 0 -- fan + * PWM 1 -- Green LED + * PWM 2 -- Blue LED + * PWM 3 -- on MIPI connector for backlight + */ + pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "otg"; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index 78e6a502f320..0c0bbdbfd85f 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -12,10 +12,45 @@ /dts-v1/; #include "exynos5422-odroidxu3-common.dtsi" +#include "exynos5422-odroidxu3-audio.dtsi" / { model = "Hardkernel Odroid XU3"; compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; + + pwmleds { + compatible = "pwm-leds"; + + greenled { + label = "green:mmc0"; + pwms = <&pwm 1 2000000 0>; + pwm-names = "pwm1"; + /* + * Green LED is much brighter than the others + * so limit its max brightness + */ + max_brightness = <127>; + linux,default-trigger = "mmc0"; + }; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpioleds { + compatible = "gpio-leds"; + redled { + label = "red:microSD"; + gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc1"; + }; + }; }; &i2c_0 { @@ -49,3 +84,19 @@ shunt-resistor = <10000>; }; }; + +&pwm { + /* + * PWM 0 -- fan + * PWM 1 -- Green LED + * PWM 2 -- Blue LED + * PWM 3 -- on MIPI connector for backlight + */ + pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "otg"; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts new file mode 100644 index 000000000000..2faf88627a48 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts @@ -0,0 +1,48 @@ +/* + * Hardkernel Odroid XU4 board device tree source + * + * Copyright (c) 2015 Krzysztof Kozlowski + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013-2015 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5422-odroidxu3-common.dtsi" + +/ { + model = "Hardkernel Odroid XU4"; + compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \ + "samsung,exynos5"; + + pwmleds { + compatible = "pwm-leds"; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&pwm { + /* + * PWM 0 -- fan + * PWM 2 -- Blue LED + */ + pinctrl-0 = <&pwm0_out &pwm2_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <0>, <2>; + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index e4443f4e6572..6a0d802e87c8 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5440.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "SAMSUNG SSDK5440 board based on EXYNOS5440"; @@ -29,12 +30,12 @@ }; &pcie_0 { - reset-gpio = <&pin_ctrl 5 0>; + reset-gpio = <&pin_ctrl 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; &pcie_1 { - reset-gpio = <&pin_ctrl 22 0>; + reset-gpio = <&pin_ctrl 22 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 8f40c7e549bd..49a4f43e5ac2 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -94,7 +94,7 @@ regulator-name = "P5.0V_USB3CON0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gph0 0 0>; + gpio = <&gph0 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb300_vbus_en>; enable-active-high; @@ -105,7 +105,7 @@ regulator-name = "P5.0V_USB3CON1"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gph0 1 0>; + gpio = <&gph0 1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb301_vbus_en>; enable-active-high; @@ -147,7 +147,7 @@ samsung,color-depth = <1>; samsung,link-rate = <0x0a>; samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx2 6 0>; + samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; panel = <&panel>; }; @@ -893,7 +893,7 @@ status = "okay"; num-cs = <1>; samsung,spi-src-clk = <0>; - cs-gpios = <&gpb1 2 0>; + cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>; cros_ec: cros-ec@0 { compatible = "google,cros-ec-spi"; @@ -903,6 +903,7 @@ pinctrl-0 = <&ec_spi_cs &ec_irq>; reg = <0>; spi-max-frequency = <3125000>; + google,has-vbc-nvram; controller-data { samsung,spi-feedback-delay = <1>; diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts index fe623928f687..a579fbf13b5f 100644 --- a/arch/arm/boot/dts/hi3620-hi4511.dts +++ b/arch/arm/boot/dts/hi3620-hi4511.dts @@ -16,7 +16,8 @@ compatible = "hisilicon,hi3620-hi4511"; chosen { - bootargs = "console=ttyAMA0,115200 root=/dev/ram0 earlyprintk"; + bootargs = "root=/dev/ram0"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts index 721b09238f58..d13af8437d10 100644 --- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts +++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts @@ -15,7 +15,7 @@ compatible = "hisilicon,hix5hd2"; chosen { - bootargs = "console=ttyAMA0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; cpus { diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index b995333ea22b..1c6c07538a78 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -383,9 +383,11 @@ }; ocotp@8002c000 { - compatible = "fsl,ocotp"; + compatible = "fsl,imx23-ocotp", "fsl,ocotp"; + #address-cells = <1>; + #size-cells = <1>; reg = <0x8002c000 0x2000>; - status = "disabled"; + clocks = <&clks 15>; }; axi-ahb@8002e000 { diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 279249b8c3f3..e3ef94ac159f 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -57,7 +57,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "sst,sst25vf016b"; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <40000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index e35cc6ba3ca6..8d04e57039bc 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -41,7 +41,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p80"; + compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <40000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 4e073e854742..c5b57d4adade 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -936,9 +936,11 @@ }; ocotp: ocotp@8002c000 { - compatible = "fsl,ocotp"; + compatible = "fsl,imx28-ocotp", "fsl,ocotp"; + #address-cells = <1>; + #size-cells = <1>; reg = <0x8002c000 0x2000>; - status = "disabled"; + clocks = <&clks 25>; }; axi-ahb@8002e000 { diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index c34f82581248..5fdb222636a7 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -25,7 +25,7 @@ #size-cells = <0>; cpu { - compatible = "arm,arm1136"; + compatible = "arm,arm1136jf-s"; device_type = "cpu"; }; }; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index e6540b5cfa4c..ed3dc3391d1c 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -29,7 +29,7 @@ #size-cells = <0>; cpu { - compatible = "arm,arm1136"; + compatible = "arm,arm1136jf-s"; device_type = "cpu"; }; }; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index 1b22512c91bd..27d763c7a307 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -33,7 +33,7 @@ flash: m25p32@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p32", "m25p80"; + compatible = "m25p32", "jedec,spi-nor"; spi-max-frequency = <25000000>; reg = <1>; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index fc89ce1e5763..542ab9e697fb 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -76,7 +76,7 @@ flash: m25p32@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p32", "st,m25p"; + compatible = "st,m25p32", "st,m25p", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <1>; diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts new file mode 100644 index 000000000000..e0161e46195c --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts @@ -0,0 +1,49 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-nit6xlite.dtsi" + +/ { + model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board"; + compatible = "boundary,imx6dl-nit6xlite", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts index 5f4d33ccc4b3..8398f979b912 100644 --- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts @@ -3,12 +3,42 @@ * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -16,6 +46,6 @@ #include "imx6qdl-nitrogen6x.dtsi" / { - model = "Freescale i.MX6 DualLite Nitrogen6x Board"; - compatible = "fsl,imx6dl-nitrogen6x", "fsl,imx6dl"; + model = "Boundary Devices i.MX6 DualLite Nitrogen6x Board"; + compatible = "boundary,imx6dl-nitrogen6x", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts index b13845c2823b..c3a14a4330a2 100644 --- a/arch/arm/boot/dts/imx6dl-rex-basic.dts +++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts @@ -23,7 +23,7 @@ &ecspi3 { flash: m25p80@0 { - compatible = "sst,sst25vf016b"; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts index 2de04479dc35..0f06ca5c9146 100644 --- a/arch/arm/boot/dts/imx6dl-sabrelite.dts +++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts @@ -2,12 +2,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 4fa254347798..364578d707a5 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -109,7 +109,7 @@ status = "okay"; flash: m25p80@0 { - compatible = "m25p80"; + compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <40000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 822ffb231c57..58adf176425a 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -145,7 +145,7 @@ status = "okay"; flash: m25p80@0 { - compatible = "sst,w25q256"; + compatible = "sst,w25q256", "jedec,spi-nor"; spi-max-frequency = <30000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts new file mode 100644 index 000000000000..d417457ca6db --- /dev/null +++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts @@ -0,0 +1,53 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-nitrogen6_max.dtsi" + +/ { + model = "Boundary Devices i.MX6 Quad Nitrogen6_MAX Board"; + compatible = "boundary,imx6q-nitrogen6_max", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts index a57866b2e97e..d1686339dc48 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts @@ -3,12 +3,42 @@ * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -16,8 +46,8 @@ #include "imx6qdl-nitrogen6x.dtsi" / { - model = "Freescale i.MX6 Quad Nitrogen6x Board"; - compatible = "fsl,imx6q-nitrogen6x", "fsl,imx6q"; + model = "Boundary Devices i.MX6 Quad Nitrogen6x Board"; + compatible = "boundary,imx6q-nitrogen6x", "fsl,imx6q"; }; &sata { diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts index 3c2852b16f78..90ea61ae04e9 100644 --- a/arch/arm/boot/dts/imx6q-rex-pro.dts +++ b/arch/arm/boot/dts/imx6q-rex-pro.dts @@ -23,7 +23,7 @@ &ecspi3 { flash: m25p80@0 { - compatible = "sst,sst25vf032b"; + compatible = "sst,sst25vf032b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 96e4688be77c..66d10d8d534c 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -2,12 +2,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index f4d6ae564ead..ecbc6eba6a2c 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -109,7 +109,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index a47a0399a172..7d81100e7d47 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -141,7 +141,7 @@ flash: m25p80@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <1>; }; diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index 45e7c39e80d5..da1341d47b14 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -38,7 +38,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "sst,sst25vf040b", "m25p80"; + compatible = "sst,sst25vf040b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi new file mode 100644 index 000000000000..24d7d3f18464 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -0,0 +1,630 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x10000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_2p5v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan_vmmc: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + }; + + bt_rfkill { + compatible = "rfkill-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_rfkill>; + gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + name = "bt_rfkill"; + type = <2>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + home { + label = "Home"; + gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>; + linux,code = <102>; + }; + + back { + label = "Back"; + gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>; + linux,code = <158>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + j14-pin1 { + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j14-pin3 { + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j14-pins8-9 { + gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j46-pin2 { + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j46-pin3 { + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + }; + + backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds0: backlight_lvds0 { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + panel_lvds0 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds0>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + sound { + compatible = "fsl,imx6dl-nit6xlite-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6dl-nit6xlite-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + txen-skew-ps = <0>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreen@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; + + rtc@6f { + compatible = "isil,isl1208"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + reg = <0x6f>; + interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j10>; + pinctrl-1 = <&pinctrl_j28>; + + imx6dl-nit6xlite { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_bt_rfkill: bt_rfkillgrp { + fsl,pins = < + /* BT wake */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* BT reset */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b0 + /* BT reg en */ + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + /* BT host wake irq */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x100b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + /* Home Button: J14 pin 5 */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Back Button: J14 pin 7 */ + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + /* Touch IRQ: J7 pin 4 */ + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + /* tcs2004 IRQ */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 + /* tsc2004 reset */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x0b0b0 + >; + }; + + pinctrl_j10: j10grp { + fsl,pins = < + /* Broadcom WiFi module pins */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; + + pinctrl_j28: j28grp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0 + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x0b0b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x030b0 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_wlan_vmmc>; + vqmmc-1-8-v; + ocr-limit = <0x180>; /* 1.65v - 2.1v */ + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi new file mode 100644 index 000000000000..a35d54fd9cd3 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -0,0 +1,873 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x10000000 0xF0000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p5v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_h1_vbus: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan_vmmc: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + reg_can_xcvr: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_xcvr>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + + menu { + label = "Menu"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + }; + + home { + label = "Home"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + back { + label = "Back"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + i2cmux@2 { + compatible = "i2c-mux-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2mux>; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH + &gpio4 15 GPIO_ACTIVE_HIGH>; + i2c-parent = <&i2c2>; + idle-state = <0>; + + i2c2@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + i2cmux@3 { + compatible = "i2c-mux-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3mux>; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; + i2c-parent = <&i2c3>; + idle-state = <0>; + + i2c3@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + + speaker-enable { + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + default-state = "off"; + }; + + ttymxc4-rs232 { + gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + default-state = "on"; + }; + }; + + backlight_lcd: backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds0: backlight_lvds0 { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds1: backlight_lvds1 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j15>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel_lcd { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + panel_lvds0 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds0>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + panel_lvds1 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds1>; + + port { + panel_in_lvds1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; + + sound { + compatible = "fsl,imx6q-nitrogen6_max-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6q-nitrogen6_max-sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + txen-skew-ps = <0>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + rtc: rtc@68 { + compatible = "st,rv4162"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rv4162>; + reg = <0x68>; + interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreen@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&iomuxc { + imx6q-nitrogen6_max { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_can_xcvr: can-xcvrgrp { + fsl,pins = < + /* Flexcan XCVR enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + /* Power Button */ + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + /* Menu Button */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + /* Home Button */ + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + /* Back Button */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* Volume Up Button */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Volume Down Button */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2mux: i2c2muxgrp { + fsl,pins = < + /* ov5642 camera i2c enable */ + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x000b0 + /* ov5640_mipi camera i2c enable */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; + + pinctrl_i2c3mux: i2c3muxgrp { + fsl,pins = < + /* PCIe I2C enable */ + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x000b0 + >; + }; + + pinctrl_j15: j15grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + /* PCIe reset */ + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x000b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_rv4162: rv4162grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x130b1 + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x030b1 + /* RS485 RX Enable: pull up */ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b1 + /* RS485 DEN: pull down */ + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b1 + /* RS485/!RS232 Select: pull down (rs232) */ + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x030b1 + /* ON: pull down */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x030b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0b0b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x100b0 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds1_out: endpoint { + remote-endpoint = <&panel_in_lvds1>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wlan_vmmc>; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + vmmc-supply = <®_1p8v>; + keep-power-in-suspend; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 340bc8e42650..caeed56b74a3 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -3,12 +3,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -65,6 +95,19 @@ pinctrl-0 = <&pinctrl_can_xcvr>; gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; }; + + reg_wlan_vmmc: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; }; gpio-keys { @@ -124,7 +167,7 @@ mux-ext-port = <3>; }; - backlight_lcd { + backlight_lcd: backlight_lcd { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -142,6 +185,43 @@ status = "okay"; }; + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j15>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + lcd_panel { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + panel { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; @@ -182,7 +262,7 @@ status = "okay"; flash: m25p80@0 { - compatible = "sst,sst25vf016b"; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; @@ -247,6 +327,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + + touchscreen@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; }; &iomuxc { @@ -258,6 +353,7 @@ fsl,pins = < /* SGTL5000 sys_mclk */ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 >; }; @@ -354,6 +450,39 @@ >; }; + pinctrl_j15: j15grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 @@ -395,6 +524,18 @@ >; }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -418,9 +559,22 @@ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */ >; }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; }; }; +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + &ldb { status = "okay"; @@ -489,6 +643,27 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wlan_vmmc>; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 9e6ecd99b472..d6d98d426384 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -12,7 +12,7 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "Phytec phyFLEX-i.MX6 Ouad"; + model = "Phytec phyFLEX-i.MX6 Quad"; compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; memory { @@ -80,7 +80,7 @@ cs-gpios = <&gpio4 24 0>; flash@0 { - compatible = "m25p80"; + compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; @@ -373,7 +373,7 @@ }; &pcie { - pinctrl-name = "default"; + pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio4 17 0>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index c37bb9ff9fac..8263fc18a7d9 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -133,7 +133,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p32"; + compatible = "st,m25p32", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index ce4c7313f509..1a69a3420ac8 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -2,12 +2,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -123,7 +153,7 @@ mux-ext-port = <4>; }; - backlight_lcd { + backlight_lcd: backlight_lcd { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -141,6 +171,43 @@ status = "okay"; }; + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j15>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + lcd_panel { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + panel { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; @@ -181,7 +248,7 @@ status = "okay"; flash: m25p80@0 { - compatible = "sst,sst25vf016b"; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; @@ -348,6 +415,39 @@ >; }; + pinctrl_j15: j15grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 @@ -416,6 +516,10 @@ }; }; +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + &ldb { status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 2c07d3a86b61..a6d445c17779 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -158,7 +158,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p32"; + compatible = "st,m25p32", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index e716e6f301c6..2b6cc8bf3c5c 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -218,16 +218,16 @@ dmas = <&sdma 14 18 0>, <&sdma 15 18 0>; dma-names = "rx", "tx"; - clocks = <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_OSC>, - <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_DUMMY>, - <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>, - <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>, - <&clks IMX6QDL_CLK_DUMMY>; + clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>, + <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>, + <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>, + <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>, + <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>; clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3", "rxtx4", "rxtx5", "rxtx6", - "rxtx7"; + "rxtx7", "dma"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index b84dff2e94ea..be118820e9f7 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -126,7 +126,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p32"; + compatible = "st,m25p32", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 320a27f8889e..d8ba99f1d87b 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -135,8 +135,24 @@ ranges; spdif: spdif@02004000 { + compatible = "fsl,imx6sl-spdif", + "fsl,imx35-spdif"; reg = <0x02004000 0x4000>; interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 14 18 0>, + <&sdma 15 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SL_CLK_SPDIF_GCLK>, <&clks IMX6SL_CLK_OSC>, + <&clks IMX6SL_CLK_SPDIF>, <&clks IMX6SL_CLK_DUMMY>, + <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_DUMMY>, + <&clks IMX6SL_CLK_IPG>, <&clks IMX6SL_CLK_DUMMY>, + <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_SPBA>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "dma"; + status = "disabled"; }; ecspi1: ecspi@02008000 { @@ -670,8 +686,11 @@ }; dcp: dcp@020fc000 { + compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp"; reg = <0x020fc000 0x4000>; - interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>, + <0 100 IRQ_TYPE_LEVEL_HIGH>, + <0 101 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index c76b87cba275..71005478cdf0 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -129,7 +129,7 @@ reg = <0>; #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl128s"; + compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; }; @@ -137,7 +137,7 @@ reg = <1>; #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl128s"; + compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; }; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 0bfc4e7865b2..0ad164ab5729 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -130,7 +130,7 @@ flash0: n25q256a@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q256a"; + compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; reg = <0>; }; @@ -138,7 +138,7 @@ flash1: n25q256a@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q256a"; + compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; reg = <1>; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index ac88c3467078..94ac4005d9cd 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -114,7 +114,7 @@ regulator-name = "peri_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index c94f2ea2316e..167f77b3bd43 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -211,7 +211,7 @@ dmas = <&sdma 14 18 0>, <&sdma 15 18 0>; dma-names = "rx", "tx"; - clocks = <&clks IMX6SX_CLK_SPDIF>, + clocks = <&clks IMX6SX_CLK_SPDIF_GCLK>, <&clks IMX6SX_CLK_OSC>, <&clks IMX6SX_CLK_SPDIF>, <&clks 0>, <&clks 0>, <&clks 0>, diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index 25746b122ea6..6aaa5ec3d846 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -87,6 +87,19 @@ }; }; +&snvs_poweroff { + status = "okay"; +}; + +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xffff>; + pre-charge-time = <0xfff>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -277,6 +290,15 @@ >; }; + pinctrl_tsc: tscgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 09edbedfd908..d00e994bdbd2 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -135,6 +135,11 @@ status = "disabled"; }; + ocram: sram@00900000 { + compatible = "mmio-sram"; + reg = <0x00900000 0x20000>; + }; + aips1: aips-bus@02000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -424,6 +429,14 @@ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; }; + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x60>; + status = "disabled"; + }; + snvs_pwrkey: snvs-powerkey { compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; @@ -571,6 +584,17 @@ status = "disabled"; }; + tsc: tsc@02040000 { + compatible = "fsl,imx6ul-tsc"; + reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_IPG>, + <&clks IMX6UL_CLK_ADC2>; + clock-names = "tsc", "adc"; + status = "disabled"; + }; + usdhc1: usdhc@02190000 { compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; reg = <0x02190000 0x4000>; @@ -625,6 +649,11 @@ status = "disabled"; }; + mmdc: mmdc@021b0000 { + compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + qspi: qspi@021e0000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h index a8d81497edb3..eeda78347619 100644 --- a/arch/arm/boot/dts/imx7d-pinfunc.h +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -15,6 +15,122 @@ * <mux_reg conf_reg input_reg mux_mode input_val> */ +#define MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO01__SAI1_MCLK 0x0004 0x0034 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO01__ANATOP_24M_OUT 0x0004 0x0034 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO01__OBSERVE0_OUT 0x0004 0x0034 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x0008 0x0038 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO02__PWM2_OUT 0x0008 0x0038 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO02__CCM_ENET_REF_CLK1 0x0008 0x0038 0x0564 0x2 0x3 +#define MX7D_PAD_GPIO1_IO02__SAI2_MCLK 0x0008 0x0038 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO02__CCM_CLKO1 0x0008 0x0038 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO02__OBSERVE1_OUT 0x0008 0x0038 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO02__USB_OTG1_ID 0x0008 0x0038 0x0734 0x7 0x3 +#define MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x000C 0x003C 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO03__PWM3_OUT 0x000C 0x003C 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO03__CCM_ENET_REF_CLK2 0x000C 0x003C 0x0570 0x2 0x3 +#define MX7D_PAD_GPIO1_IO03__SAI3_MCLK 0x000C 0x003C 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x000C 0x003C 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO03__OBSERVE2_OUT 0x000C 0x003C 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO03__USB_OTG2_ID 0x000C 0x003C 0x0730 0x7 0x3 +#define MX7D_PAD_GPIO1_IO04__GPIO1_IO4 0x0010 0x0040 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x0010 0x0040 0x072C 0x1 0x1 +#define MX7D_PAD_GPIO1_IO04__FLEXTIMER1_CH4 0x0010 0x0040 0x0594 0x2 0x1 +#define MX7D_PAD_GPIO1_IO04__UART5_CTS_B 0x0010 0x0040 0x0710 0x3 0x4 +#define MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x0010 0x0040 0x05D4 0x4 0x2 +#define MX7D_PAD_GPIO1_IO04__OBSERVE3_OUT 0x0010 0x0040 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x0014 0x0044 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR 0x0014 0x0044 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO05__FLEXTIMER1_CH5 0x0014 0x0044 0x0598 0x2 0x1 +#define MX7D_PAD_GPIO1_IO05__UART5_RTS_B 0x0014 0x0044 0x0710 0x3 0x5 +#define MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x0014 0x0044 0x05D8 0x4 0x2 +#define MX7D_PAD_GPIO1_IO05__OBSERVE4_OUT 0x0014 0x0044 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x0018 0x0048 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO06__USB_OTG2_OC 0x0018 0x0048 0x0728 0x1 0x1 +#define MX7D_PAD_GPIO1_IO06__FLEXTIMER1_CH6 0x0018 0x0048 0x059C 0x2 0x1 +#define MX7D_PAD_GPIO1_IO06__UART5_RX_DATA 0x0018 0x0048 0x0714 0x3 0x4 +#define MX7D_PAD_GPIO1_IO06__I2C2_SCL 0x0018 0x0048 0x05DC 0x4 0x2 +#define MX7D_PAD_GPIO1_IO06__CCM_WAIT 0x0018 0x0048 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO06__KPP_ROW4 0x0018 0x0048 0x0624 0x6 0x1 +#define MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x001C 0x004C 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO07__USB_OTG2_PWR 0x001C 0x004C 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO07__FLEXTIMER1_CH7 0x001C 0x004C 0x05A0 0x2 0x1 +#define MX7D_PAD_GPIO1_IO07__UART5_TX_DATA 0x001C 0x004C 0x0714 0x3 0x5 +#define MX7D_PAD_GPIO1_IO07__I2C2_SDA 0x001C 0x004C 0x05E0 0x4 0x2 +#define MX7D_PAD_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1 +#define MX7D_PAD_GPIO1_IO08__GPIO1_IO8 0x0014 0x026C 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x0014 0x026C 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0014 0x026C 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO08__UART3_DCE_RX 0x0014 0x026C 0x0704 0x3 0x0 +#define MX7D_PAD_GPIO1_IO08__UART3_DTE_TX 0x0014 0x026C 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO08__I2C3_SCL 0x0014 0x026C 0x05E4 0x4 0x0 +#define MX7D_PAD_GPIO1_IO08__KPP_COL5 0x0014 0x026C 0x0608 0x6 0x0 +#define MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x0014 0x026C 0x0000 0x7 0x0 +#define MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x0018 0x0270 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO09__SD1_LCTL 0x0018 0x0270 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO09__CCM_ENET_REF_CLK3 0x0018 0x0270 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO09__UART3_DCE_TX 0x0018 0x0270 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO09__UART3_DTE_RX 0x0018 0x0270 0x0704 0x3 0x1 +#define MX7D_PAD_GPIO1_IO09__I2C3_SDA 0x0018 0x0270 0x05E8 0x4 0x0 +#define MX7D_PAD_GPIO1_IO09__CCM_PMIC_READY 0x0018 0x0270 0x04F4 0x5 0x0 +#define MX7D_PAD_GPIO1_IO09__KPP_ROW5 0x0018 0x0270 0x0628 0x6 0x0 +#define MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x0018 0x0270 0x0000 0x7 0x0 +#define MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x001C 0x0274 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO10__SD2_LCTL 0x001C 0x0274 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x001C 0x0274 0x0568 0x2 0x0 +#define MX7D_PAD_GPIO1_IO10__UART3_DCE_RTS 0x001C 0x0274 0x0700 0x3 0x0 +#define MX7D_PAD_GPIO1_IO10__UART3_DTE_CTS 0x001C 0x0274 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO10__I2C4_SCL 0x001C 0x0274 0x05EC 0x4 0x0 +#define MX7D_PAD_GPIO1_IO10__FLEXTIMER1_PHA 0x001C 0x0274 0x05A4 0x5 0x0 +#define MX7D_PAD_GPIO1_IO10__KPP_COL6 0x001C 0x0274 0x060C 0x6 0x0 +#define MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x001C 0x0274 0x0000 0x7 0x0 +#define MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x0020 0x0278 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO11__SD3_LCTL 0x0020 0x0278 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x0020 0x0278 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO11__UART3_DCE_CTS 0x0020 0x0278 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO11__UART3_DTE_RTS 0x0020 0x0278 0x0700 0x3 0x1 +#define MX7D_PAD_GPIO1_IO11__I2C4_SDA 0x0020 0x0278 0x05F0 0x4 0x0 +#define MX7D_PAD_GPIO1_IO11__FLEXTIMER1_PHB 0x0020 0x0278 0x05A8 0x5 0x0 +#define MX7D_PAD_GPIO1_IO11__KPP_ROW6 0x0020 0x0278 0x062C 0x6 0x0 +#define MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x0020 0x0278 0x0000 0x7 0x0 +#define MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x0024 0x027C 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO12__SD2_VSELECT 0x0024 0x027C 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x0024 0x027C 0x0564 0x2 0x0 +#define MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x0024 0x027C 0x04DC 0x3 0x0 +#define MX7D_PAD_GPIO1_IO12__CM4_NMI 0x0024 0x027C 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO12__CCM_EXT_CLK1 0x0024 0x027C 0x04E4 0x5 0x0 +#define MX7D_PAD_GPIO1_IO12__SNVS_VIO_5 0x0024 0x027C 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO12__USB_OTG1_ID 0x0024 0x027C 0x0734 0x7 0x0 +#define MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x0028 0x0280 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO13__SD3_VSELECT 0x0028 0x0280 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO13__CCM_ENET_REF_CLK2 0x0028 0x0280 0x0570 0x2 0x0 +#define MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x0028 0x0280 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO13__CCM_PMIC_READY 0x0028 0x0280 0x04F4 0x4 0x1 +#define MX7D_PAD_GPIO1_IO13__CCM_EXT_CLK2 0x0028 0x0280 0x04E8 0x5 0x0 +#define MX7D_PAD_GPIO1_IO13__SNVS_VIO_5_CTL 0x0028 0x0280 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO13__USB_OTG2_ID 0x0028 0x0280 0x0730 0x7 0x0 +#define MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x002C 0x0284 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO14__SD3_CD_B 0x002C 0x0284 0x0738 0x1 0x0 +#define MX7D_PAD_GPIO1_IO14__ENET2_MDIO 0x002C 0x0284 0x0574 0x2 0x0 +#define MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x002C 0x0284 0x04E0 0x3 0x0 +#define MX7D_PAD_GPIO1_IO14__WDOG3_WDOG_B 0x002C 0x0284 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO14__CCM_EXT_CLK3 0x002C 0x0284 0x04EC 0x5 0x0 +#define MX7D_PAD_GPIO1_IO14__SDMA_EXT_EVENT0 0x002C 0x0284 0x06D8 0x6 0x0 +#define MX7D_PAD_GPIO1_IO15__GPIO1_IO15 0x0030 0x0288 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO15__SD3_WP 0x0030 0x0288 0x073C 0x1 0x0 +#define MX7D_PAD_GPIO1_IO15__ENET2_MDC 0x0030 0x0288 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x0030 0x0288 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO15__WDOG4_WDOG_B 0x0030 0x0288 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO15__CCM_EXT_CLK4 0x0030 0x0288 0x04F0 0x5 0x0 +#define MX7D_PAD_GPIO1_IO15__SDMA_EXT_EVENT1 0x0030 0x0288 0x06DC 0x6 0x0 #define MX7D_PAD_EPDC_DATA00__EPDC_DATA0 0x0034 0x02A4 0x0000 0x0 0x0 #define MX7D_PAD_EPDC_DATA00__SIM1_PORT2_TRXD 0x0034 0x02A4 0x0000 0x1 0x0 #define MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x0034 0x02A4 0x0000 0x2 0x0 @@ -453,7 +569,7 @@ #define MX7D_PAD_LCD_DATA23__EIM_ADDR26 0x0124 0x0394 0x0000 0x4 0x0 #define MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x0124 0x0394 0x0000 0x5 0x0 #define MX7D_PAD_LCD_DATA23__I2C4_SDA 0x0124 0x0394 0x05F0 0x6 0x1 -#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0128 0x0398 0x0000 0x0 0x0 +#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0128 0x0398 0x06F4 0x0 0x0 #define MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x0128 0x0398 0x0000 0x0 0x0 #define MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x0128 0x0398 0x05D4 0x1 0x0 #define MX7D_PAD_UART1_RX_DATA__CCM_PMIC_READY 0x0128 0x0398 0x0000 0x2 0x0 @@ -469,7 +585,7 @@ #define MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT 0x012C 0x039C 0x0000 0x4 0x0 #define MX7D_PAD_UART1_TX_DATA__GPIO4_IO1 0x012C 0x039C 0x0000 0x5 0x0 #define MX7D_PAD_UART1_TX_DATA__ENET1_MDC 0x012C 0x039C 0x0000 0x6 0x0 -#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0130 0x03A0 0x0000 0x0 0x0 +#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0130 0x03A0 0x06FC 0x0 0x2 #define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0130 0x03A0 0x0000 0x0 0x0 #define MX7D_PAD_UART2_RX_DATA__I2C2_SCL 0x0130 0x03A0 0x05DC 0x1 0x0 #define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK 0x0130 0x03A0 0x0000 0x2 0x0 @@ -501,7 +617,7 @@ #define MX7D_PAD_UART3_TX_DATA__ENET1_1588_EVENT0_OUT 0x013C 0x03AC 0x0000 0x4 0x0 #define MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x013C 0x03AC 0x0000 0x5 0x0 #define MX7D_PAD_UART3_TX_DATA__SD2_LCTL 0x013C 0x03AC 0x0000 0x6 0x0 -#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x0140 0x03B0 0x0000 0x0 0x0 +#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x0140 0x03B0 0x0700 0x0 0x2 #define MX7D_PAD_UART3_RTS_B__UART3_DTE_CTS 0x0140 0x03B0 0x0000 0x0 0x0 #define MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x0140 0x03B0 0x0728 0x1 0x0 #define MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x0140 0x03B0 0x0000 0x2 0x0 diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index fdd1d7c9a5cc..432aaf5d5ef7 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -101,6 +101,45 @@ arm-supply = <&sw1a_reg>; }; +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <ðphy1>; + fsl,magic-packet; + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -231,6 +270,17 @@ status = "okay"; }; +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + status = "okay"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -241,11 +291,60 @@ status = "okay"; }; +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + fsl,tuning-step = <2>; + non-removable; + status = "okay"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; imx7d-sdb { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3 + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1 + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1 + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1 + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1 + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1 + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1 + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1 + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1 + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1 + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1 + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1 + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1 + >; + }; + pinctrl_hog: hoggrp { fsl,pins = < MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 @@ -281,7 +380,6 @@ >; }; - pinctrl_uart1: uart1grp { fsl,pins = < MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 6e444bb873f9..ebc053a06405 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -446,6 +446,12 @@ status = "disabled"; }; + iomuxc_lpsr: iomuxc-lpsr@302c0000 { + compatible = "fsl,imx7d-iomuxc-lpsr"; + reg = <0x302c0000 0x10000>; + fsl,input-sel = <&iomuxc>; + }; + gpt1: gpt@302d0000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302d0000 0x10000>; @@ -570,6 +576,58 @@ }; }; + aips2: aips-bus@30400000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30400000 0x400000>; + ranges; + + pwm1: pwm@30660000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30660000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM1_ROOT_CLK>, + <&clks IMX7D_PWM1_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@30670000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30670000 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM2_ROOT_CLK>, + <&clks IMX7D_PWM2_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@30680000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30680000 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM3_ROOT_CLK>, + <&clks IMX7D_PWM3_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@30690000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30690000 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM4_ROOT_CLK>, + <&clks IMX7D_PWM4_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; + aips3: aips-bus@30800000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -694,6 +752,77 @@ status = "disabled"; }; + usbotg1: usb@30b10000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b10000 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc1 0>; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbotg2: usb@30b20000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b20000 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop2>; + fsl,usbmisc = <&usbmisc2 0>; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbh: usb@30b30000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b30000 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop3>; + fsl,usbmisc = <&usbmisc3 0>; + phy_type = "hsic"; + dr_mode = "host"; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbmisc1: usbmisc@30b10200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b10200 0x200>; + }; + + usbmisc2: usbmisc@30b20200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b20200 0x200>; + }; + + usbmisc3: usbmisc@30b30200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b30200 0x200>; + }; + + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY1_CLK>; + clock-names = "main_clk"; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY2_CLK>; + clock-names = "main_clk"; + }; + + usbphynop3: usbphynop3 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; + clock-names = "main_clk"; + }; + usdhc1: usdhc@30b40000 { compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b40000 0x10000>; @@ -729,6 +858,42 @@ bus-width = <4>; status = "disabled"; }; + + fec1: ethernet@30be0000 { + compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; + reg = <0x30be0000 0x10000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, + <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + status = "disabled"; + }; + + fec2: ethernet@30bf0000 { + compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; + reg = <0x30bf0000 0x10000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, + <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/k2e-evm.dts index 50c83c21d911..b7e99807f5c2 100644 --- a/arch/arm/boot/dts/k2e-evm.dts +++ b/arch/arm/boot/dts/k2e-evm.dts @@ -13,7 +13,7 @@ #include "k2e.dtsi" / { - compatible = "ti,k2e-evm","ti,keystone"; + compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone"; model = "Texas Instruments Keystone 2 Edison EVM"; soc { diff --git a/arch/arm/boot/dts/k2e-netcp.dtsi b/arch/arm/boot/dts/k2e-netcp.dtsi index b13b3c94e7fc..ac990f679725 100644 --- a/arch/arm/boot/dts/k2e-netcp.dtsi +++ b/arch/arm/boot/dts/k2e-netcp.dtsi @@ -72,7 +72,17 @@ qmss: qmss@2a40000 { qalloc-by-id; }; }; + accumulator { + acc-low-0 { + qrange = <480 32>; + accumulator = <0 47 16 2 50>; + interrupts = <0 226 0xf01>; + multi-queue; + qalloc-by-id; + }; + }; }; + descriptor-regions { #address-cells = <1>; #size-cells = <1>; @@ -83,6 +93,19 @@ qmss: qmss@2a40000 { link-index = <0x4000>; }; }; + + pdsps { + #address-cells = <1>; + #size-cells = <1>; + ranges; + pdsp0@0x2a10000 { + reg = <0x2a10000 0x1000 /*iram */ + 0x2a0f000 0x100 /*reg*/ + 0x2a0c000 0x3c8 /*intd */ + 0x2a20000 0x4000>; /*cmd*/ + id = <0>; + }; + }; }; /* qmss */ knav_dmas: knav_dmas@0 { diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi index 675fb8e492c6..1097dada56d2 100644 --- a/arch/arm/boot/dts/k2e.dtsi +++ b/arch/arm/boot/dts/k2e.dtsi @@ -9,6 +9,9 @@ */ / { + compatible = "ti,k2e", "ti,keystone"; + model = "Texas Instruments Keystone 2 Edison SoC"; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts index 660ebf58d547..8161bf53271b 100644 --- a/arch/arm/boot/dts/k2hk-evm.dts +++ b/arch/arm/boot/dts/k2hk-evm.dts @@ -13,7 +13,7 @@ #include "k2hk.dtsi" / { - compatible = "ti,k2hk-evm","ti,keystone"; + compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone"; model = "Texas Instruments Keystone 2 Kepler/Hawking EVM"; soc { diff --git a/arch/arm/boot/dts/k2hk-netcp.dtsi b/arch/arm/boot/dts/k2hk-netcp.dtsi index 77a32c3c17e4..f86d6ddb832b 100644 --- a/arch/arm/boot/dts/k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/k2hk-netcp.dtsi @@ -47,6 +47,7 @@ qmss: qmss@2a40000 { "region", "push", "pop"; }; }; + queue-pools { qpend { qpend-0 { @@ -88,7 +89,17 @@ qmss: qmss@2a40000 { qalloc-by-id; }; }; + accumulator { + acc-low-0 { + qrange = <480 32>; + accumulator = <0 47 16 2 50>; + interrupts = <0 226 0xf01>; + multi-queue; + qalloc-by-id; + }; + }; }; + descriptor-regions { #address-cells = <1>; #size-cells = <1>; @@ -99,6 +110,19 @@ qmss: qmss@2a40000 { link-index = <0x4000>; }; }; + + pdsps { + #address-cells = <1>; + #size-cells = <1>; + ranges; + pdsp0@0x2a10000 { + reg = <0x2a10000 0x1000 /*iram */ + 0x2a0f000 0x100 /*reg*/ + 0x2a0c000 0x3c8 /*intd */ + 0x2a20000 0x4000>; /*cmd*/ + id = <0>; + }; + }; }; /* qmss */ knav_dmas: knav_dmas@0 { diff --git a/arch/arm/boot/dts/k2hk.dtsi b/arch/arm/boot/dts/k2hk.dtsi index d0810a5f2968..ada4c7ac96e7 100644 --- a/arch/arm/boot/dts/k2hk.dtsi +++ b/arch/arm/boot/dts/k2hk.dtsi @@ -9,6 +9,9 @@ */ / { + compatible = "ti,k2hk", "ti,keystone"; + model = "Texas Instruments Keystone 2 Kepler/Hawking SoC"; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/k2l-evm.dts b/arch/arm/boot/dts/k2l-evm.dts index 9a69a6b55374..00861244d788 100644 --- a/arch/arm/boot/dts/k2l-evm.dts +++ b/arch/arm/boot/dts/k2l-evm.dts @@ -13,7 +13,7 @@ #include "k2l.dtsi" / { - compatible = "ti,k2l-evm","ti,keystone"; + compatible = "ti,k2l-evm", "ti,k2l", "ti,keystone"; model = "Texas Instruments Keystone 2 Lamarr EVM"; soc { diff --git a/arch/arm/boot/dts/k2l-netcp.dtsi b/arch/arm/boot/dts/k2l-netcp.dtsi index 6b95284d11d4..01aef230773d 100644 --- a/arch/arm/boot/dts/k2l-netcp.dtsi +++ b/arch/arm/boot/dts/k2l-netcp.dtsi @@ -72,7 +72,16 @@ qmss: qmss@2a40000 { qalloc-by-id; }; }; + accumulator { + acc-low-0 { + qrange = <480 32>; + accumulator = <0 47 16 2 50>; + interrupts = <0 226 0xf01>; + multi-queue; + }; + }; }; + descriptor-regions { #address-cells = <1>; #size-cells = <1>; @@ -83,6 +92,20 @@ qmss: qmss@2a40000 { link-index = <0x4000>; }; }; + + pdsps { + #address-cells = <1>; + #size-cells = <1>; + ranges; + pdsp0@0x2a10000 { + reg = <0x2a10000 0x1000 /*iram */ + 0x2a0f000 0x100 /*reg*/ + 0x2a0c000 0x3c8 /*intd */ + 0x2a20000 0x4000>; /*cmd*/ + id = <0>; + }; + }; + }; /* qmss */ knav_dmas: knav_dmas@0 { diff --git a/arch/arm/boot/dts/k2l.dtsi b/arch/arm/boot/dts/k2l.dtsi index 49fd414f680c..4446da72b0ae 100644 --- a/arch/arm/boot/dts/k2l.dtsi +++ b/arch/arm/boot/dts/k2l.dtsi @@ -9,6 +9,9 @@ */ / { + compatible = "ti,k2l", "ti,keystone"; + model = "Texas Instruments Keystone 2 Lamarr SoC"; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 72816d65f7ec..3f272826f537 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -12,6 +12,7 @@ #include "skeleton.dtsi" / { + compatible = "ti,keystone"; model = "Texas Instruments Keystone 2 SoC"; #address-cells = <2>; #size-cells = <2>; @@ -136,7 +137,7 @@ }; spi0: spi@21000400 { - compatible = "ti,dm6441-spi"; + compatible = "ti,keystone-spi", "ti,dm6441-spi"; reg = <0x21000400 0x200>; num-cs = <4>; ti,davinci-spi-intr-line = <0>; @@ -147,7 +148,7 @@ }; spi1: spi@21000600 { - compatible = "ti,dm6441-spi"; + compatible = "ti,keystone-spi", "ti,dm6441-spi"; reg = <0x21000600 0x200>; num-cs = <4>; ti,davinci-spi-intr-line = <0>; @@ -158,7 +159,7 @@ }; spi2: spi@21000800 { - compatible = "ti,dm6441-spi"; + compatible = "ti,keystone-spi", "ti,dm6441-spi"; reg = <0x21000800 0x200>; num-cs = <4>; ti,davinci-spi-intr-line = <0>; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 464f09a1a4a5..7b5a4a18f49c 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -40,16 +40,6 @@ pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ - cesa: crypto@0301 { - compatible = "marvell,orion-crypto"; - reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>, - <MBUS_ID(0x03, 0x01) 0 0x800>; - reg-names = "regs", "sram"; - interrupts = <22>; - clocks = <&gate_clk 17>; - status = "okay"; - }; - nand: nand@012f { #address-cells = <1>; #size-cells = <1>; @@ -65,6 +55,14 @@ pinctrl-names = "default"; status = "disabled"; }; + + crypto_sram: sa-sram@0301 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>; + clocks = <&gate_clk 17>; + #address-cells = <1>; + #size-cells = <1>; + }; }; ocp@f1000000 { @@ -252,6 +250,17 @@ status = "okay"; }; + cesa: crypto@30000 { + compatible = "marvell,kirkwood-crypto"; + reg = <0x30000 0x10000>; + reg-names = "regs"; + interrupts = <22>; + clocks = <&gate_clk 17>; + marvell,crypto-srams = <&crypto_sram>; + marvell,crypto-sram-size = <0x800>; + status = "okay"; + }; + usb0: ehci@50000 { compatible = "marvell,orion-ehci"; reg = <0x50000 0x1000>; diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index 2c569a6ddc9a..52591d83e8cd 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -68,6 +68,46 @@ }; soc { + sct_pwm: pwm@40000000 { + compatible = "nxp,lpc1850-sct-pwm"; + reg = <0x40000000 0x1000>; + clocks =<&ccu1 CLK_CPU_SCT>; + clock-names = "pwm"; + resets = <&rgu 37>; + #pwm-cells = <3>; + status = "disabled"; + }; + + dmac: dma-controller@40002000 { + compatible = "arm,pl080", "arm,primecell"; + arm,primecell-periphid = <0x00041080>; + reg = <0x40002000 0x1000>; + interrupts = <2>; + clocks = <&ccu1 CLK_CPU_DMA>; + clock-names = "apb_pclk"; + resets = <&rgu 19>; + #dma-cells = <2>; + dma-channels = <8>; + dma-requests = <16>; + lli-bus-interface-ahb1; + lli-bus-interface-ahb2; + mem-bus-interface-ahb1; + mem-bus-interface-ahb2; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + }; + + spifi: flash-controller@40003000 { + compatible = "nxp,lpc1773-spifi"; + reg = <0x40003000 0x1000>, <0x14000000 0x4000000>; + reg-names = "spifi", "flash"; + interrupts = <30>; + clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>; + clock-names = "spifi", "reg"; + resets = <&rgu 53>; + status = "disabled"; + }; + mmcsd: mmcsd@40004000 { compatible = "snps,dw-mshc"; reg = <0x40004000 0x1000>; @@ -75,6 +115,7 @@ num-slots = <1>; clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>; clock-names = "ciu", "biu"; + resets = <&rgu 20>; status = "disabled"; }; @@ -83,6 +124,7 @@ reg = <0x40006100 0x100>; interrupts = <8>; clocks = <&ccu1 CLK_CPU_USB0>; + resets = <&rgu 17>; phys = <&usb0_otg_phy>; phy-names = "usb"; has-transaction-translator; @@ -94,6 +136,7 @@ reg = <0x40007100 0x100>; interrupts = <9>; clocks = <&ccu1 CLK_CPU_USB1>; + resets = <&rgu 18>; status = "disabled"; }; @@ -102,6 +145,7 @@ reg = <0x40005000 0x1000>; clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>; clock-names = "mpmcclk", "apb_pclk"; + resets = <&rgu 21>; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0x1c000000 0x1000000 @@ -118,6 +162,7 @@ interrupt-names = "combined"; clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>; clock-names = "clcdclk", "apb_pclk"; + resets = <&rgu 16>; status = "disabled"; }; @@ -128,6 +173,8 @@ interrupt-names = "macirq"; clocks = <&ccu1 CLK_CPU_ETHERNET>; clock-names = "stmmaceth"; + resets = <&rgu 22>; + reset-names = "stmmaceth"; status = "disabled"; }; @@ -135,12 +182,20 @@ compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd"; reg = <0x40043000 0x1000>; clocks = <&ccu1 CLK_CPU_CREG>; + resets = <&rgu 5>; usb0_otg_phy: phy@004 { compatible = "nxp,lpc1850-usb-otg-phy"; clocks = <&ccu1 CLK_USB0>; #phy-cells = <0>; }; + + dmamux: dma-mux@11c { + compatible = "nxp,lpc1850-dmamux"; + #dma-cells = <3>; + dma-requests = <64>; + dma-masters = <&dmac>; + }; }; cgu: clock-controller@40050000 { @@ -178,6 +233,22 @@ "base_ssp0_clk", "base_sdio_clk"; }; + rgu: reset-controller@40053000 { + compatible = "nxp,lpc1850-rgu"; + reg = <0x40053000 0x1000>; + clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>; + clock-names = "delay", "reg"; + #reset-cells = <1>; + }; + + watchdog@40080000 { + compatible = "nxp,lpc1850-wwdt"; + reg = <0x40080000 0x24>; + interrupts = <49>; + clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>; + clock-names = "wdtclk", "reg"; + }; + uart0: serial@40081000 { compatible = "nxp,lpc1850-uart", "ns16550a"; reg = <0x40081000 0x1000>; @@ -185,6 +256,12 @@ interrupts = <24>; clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>; clock-names = "uartclk", "reg"; + resets = <&rgu 44>; + dmas = <&dmamux 1 1 2 + &dmamux 2 1 2 + &dmamux 11 2 2 + &dmamux 12 2 2>; + dma-names = "tx", "rx", "tx", "rx"; status = "disabled"; }; @@ -195,6 +272,10 @@ interrupts = <25>; clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>; clock-names = "uartclk", "reg"; + resets = <&rgu 45>; + dmas = <&dmamux 3 1 2 + &dmamux 4 1 2>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -204,6 +285,10 @@ interrupts = <22>; clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>; clock-names = "sspclk", "apb_pclk"; + resets = <&rgu 50>; + dmas = <&dmamux 9 0 2 + &dmamux 10 0 2>; + dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -215,6 +300,7 @@ interrupts = <12>; clocks = <&ccu1 CLK_CPU_TIMER0>; clock-names = "timerclk"; + resets = <&rgu 32>; }; timer1: timer@40085000 { @@ -223,6 +309,7 @@ interrupts = <13>; clocks = <&ccu1 CLK_CPU_TIMER1>; clock-names = "timerclk"; + resets = <&rgu 33>; }; pinctrl: pinctrl@40086000 { @@ -231,11 +318,23 @@ clocks = <&ccu1 CLK_CPU_SCU>; }; + i2c0: i2c@400a1000 { + compatible = "nxp,lpc1788-i2c"; + reg = <0x400a1000 0x1000>; + interrupts = <18>; + clocks = <&ccu1 CLK_APB1_I2C0>; + resets = <&rgu 48>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + can1: can@400a4000 { compatible = "bosch,c_can"; reg = <0x400a4000 0x1000>; interrupts = <43>; clocks = <&ccu1 CLK_APB1_CAN1>; + resets = <&rgu 54>; status = "disabled"; }; @@ -246,6 +345,10 @@ interrupts = <26>; clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>; clock-names = "uartclk", "reg"; + resets = <&rgu 46>; + dmas = <&dmamux 5 1 2 + &dmamux 6 1 2>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -256,6 +359,12 @@ interrupts = <27>; clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>; clock-names = "uartclk", "reg"; + resets = <&rgu 47>; + dmas = <&dmamux 7 1 2 + &dmamux 8 1 2 + &dmamux 13 3 2 + &dmamux 14 3 2>; + dma-names = "tx", "rx", "rx", "tx"; status = "disabled"; }; @@ -265,6 +374,7 @@ interrupts = <14>; clocks = <&ccu1 CLK_CPU_TIMER2>; clock-names = "timerclk"; + resets = <&rgu 34>; }; timer3: timer@400c4000 { @@ -273,6 +383,7 @@ interrupts = <15>; clocks = <&ccu1 CLK_CPU_TIMER3>; clock-names = "timerclk"; + resets = <&rgu 35>; }; ssp1: spi@400c5000 { @@ -281,6 +392,28 @@ interrupts = <23>; clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>; clock-names = "sspclk", "apb_pclk"; + resets = <&rgu 51>; + dmas = <&dmamux 11 2 2 + &dmamux 12 2 2 + &dmamux 3 3 2 + &dmamux 4 3 2 + &dmamux 5 2 2 + &dmamux 6 2 2 + &dmamux 13 2 2 + &dmamux 14 2 2>; + dma-names = "rx", "tx", "tx", "rx", + "tx", "rx", "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@400e0000 { + compatible = "nxp,lpc1788-i2c"; + reg = <0x400e0000 0x1000>; + interrupts = <19>; + clocks = <&ccu1 CLK_APB3_I2C1>; + resets = <&rgu 49>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -291,6 +424,7 @@ reg = <0x400e2000 0x1000>; interrupts = <51>; clocks = <&ccu1 CLK_APB3_CAN0>; + resets = <&rgu 55>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts index 32bc7ff4eb2a..022d495432c1 100644 --- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts +++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts @@ -15,6 +15,9 @@ #include "lpc18xx.dtsi" #include "lpc4350.dtsi" +#include "dt-bindings/input/input.h" +#include "dt-bindings/gpio/gpio.h" + / { model = "Hitex LPC4350 Evaluation Board"; compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350"; @@ -34,6 +37,88 @@ device_type = "memory"; reg = <0x28000000 0x800000>; /* 8 MB */ }; + + pca_buttons { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + autorepeat; + + button@0 { + label = "joy:right"; + linux,code = <KEY_RIGHT>; + gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>; + }; + + button@1 { + label = "joy:up"; + linux,code = <KEY_UP>; + gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>; + }; + + + button@2 { + label = "joy:enter"; + linux,code = <KEY_ENTER>; + gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>; + }; + + button@3 { + label = "joy:left"; + linux,code = <KEY_LEFT>; + gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>; + }; + + button@4 { + label = "joy:down"; + linux,code = <KEY_DOWN>; + gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>; + }; + + button@5 { + label = "user:sw3"; + linux,code = <KEY_F1>; + gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>; + }; + + button@6 { + label = "user:sw4"; + linux,code = <KEY_F2>; + gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>; + }; + + button@7 { + label = "user:sw5"; + linux,code = <KEY_F3>; + gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>; + }; + }; + + pca_leds { + compatible = "gpio-leds"; + + led0 { + label = "ext:led0"; + gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led1 { + label = "ext:led1"; + gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>; + }; + + led2 { + label = "ext:led2"; + gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>; + }; + + led3 { + label = "ext:led3"; + gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>; + }; + }; }; &pinctrl { @@ -186,6 +271,43 @@ }; }; + i2c0_pins: i2c0-pins { + i2c0_pins_cfg { + pins = "i2c0_scl", "i2c0_sda"; + function = "i2c0"; + input-enable; + }; + }; + + spifi_pins: spifi-pins { + spifi_clk_cfg { + pins = "p3_3"; + function = "spifi"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + spifi_mosi_miso_sio2_3_cfg { + pins = "p3_7", "p3_6", "p3_5", "p3_4"; + function = "spifi"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + spifi_cs_cfg { + pins = "p3_8"; + function = "spifi"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + }; + uart0_pins: uart0-pins { uart0_rx_cfg { pins = "pf_11"; @@ -271,6 +393,31 @@ clock-frequency = <25000000>; }; +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + + /* NXP SE97BTP with temperature sensor + eeprom */ + sensor@18 { + compatible = "nxp,jc42"; + reg = <0x18>; + }; + + eeprom@50 { + compatible = "nxp,24c02"; + reg = <0x50>; + }; + + pca_gpio: gpio@24 { + compatible = "nxp,pca9673"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + &mac { status = "okay"; phy-mode = "mii"; @@ -278,6 +425,34 @@ pinctrl-0 = <&enet_mii_pins>; }; +&spifi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spifi_pins>; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x000000 0x040000>; /* 256 KiB */ + }; + + partition@1 { + label = "kernel"; + reg = <0x040000 0x2c0000>; /* 2.75 MiB */ + }; + + partition@2 { + label = "rootfs"; + reg = <0x300000 0x500000>; /* 5 MiB */ + }; + }; +}; + &uart0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts index 5f7bdad80963..391121d24daa 100644 --- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts +++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts @@ -332,6 +332,14 @@ }; }; + i2c0_pins: i2c0-pins { + i2c0_pins_cfg { + pins = "i2c0_scl", "i2c0_sda"; + function = "i2c0"; + input-enable; + }; + }; + sdmmc_pins: sdmmc-pins { sdmmc_clk_cfg { pins = "pc_0"; @@ -363,6 +371,49 @@ }; }; + spifi_pins: spifi-pins { + spifi_clk_cfg { + pins = "p3_3"; + function = "spifi"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + spifi_mosi_miso_sio2_3_cfg { + pins = "p3_7", "p3_6", "p3_5", "p3_4"; + function = "spifi"; + slew-rate = <0>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + spifi_cs_cfg { + pins = "p3_8"; + function = "spifi"; + bias-disable; + }; + }; + + ssp0_pins: ssp0-pins { + ssp0_sck_miso_mosi { + pins = "pf_0", "pf_2", "pf_3"; + function = "ssp0"; + slew-rate = <1>; + bias-pull-down; + input-enable; + input-schmitt-disable; + }; + + ssp0_ssel { + pins = "pf_1"; + function = "ssp0"; + bias-pull-up; + }; + }; + uart0_pins: uart0-pins { uart0_rx_cfg { pins = "pf_11"; @@ -410,6 +461,23 @@ }; }; +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + + lm75@48 { + compatible = "nxp,lm75"; + reg = <0x48>; + }; + + eeprom@57 { + compatible = "microchip,24c64"; + reg = <0x57>; + }; +}; + &emc { status = "okay"; pinctrl-names = "default"; @@ -489,6 +557,33 @@ pinctrl-0 = <&sdmmc_pins>; }; +&spifi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spifi_pins>; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "data"; + reg = <0 0x200000>; + }; + }; +}; + +&ssp0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ssp0_pins>; + num-cs = <1>; +}; + &uart0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index e008f9367510..fbb89d13401e 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -144,6 +144,19 @@ &i2c0 { status = "okay"; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; &i2c1 { diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 973a496207fc..9430a9928199 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -53,6 +53,7 @@ interrupt-parent = <&gic>; aliases { + crypto = &crypto; ethernet0 = &enet0; ethernet1 = &enet1; ethernet2 = &enet2; @@ -148,6 +149,45 @@ big-endian; }; + crypto: crypto@1700000 { + compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <7>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x1700000 0x0 0x100000>; + ranges = <0x0 0x0 0x1700000 0x100000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + + sec_jr0: jr@10000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@20000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x20000 0x10000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr@30000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + }; + + }; + clockgen: clocking@1ee1000 { #address-cells = <1>; #size-cells = <1>; @@ -405,6 +445,7 @@ model = "eTSEC"; fsl,magic-packet; ranges; + dma-coherent; queue-group@2d10000 { #address-cells = <2>; @@ -433,6 +474,7 @@ interrupt-parent = <&gic>; model = "eTSEC"; ranges; + dma-coherent; queue-group@2d50000 { #address-cells = <2>; @@ -461,6 +503,7 @@ interrupt-parent = <&gic>; model = "eTSEC"; ranges; + dma-coherent; queue-group@2d90000 { #address-cells = <2>; @@ -494,6 +537,7 @@ reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; }; }; }; diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts new file mode 100644 index 000000000000..c7fdaeabbe7b --- /dev/null +++ b/arch/arm/boot/dts/meson8b-mxq.dts @@ -0,0 +1,67 @@ +/* + * Copyright 2015 Endless Mobile, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "meson8b.dtsi" + +/ { + model = "TRONFY MXQ S805"; + compatible = "tronfy,mxq", "amlogic,meson8b"; + + aliases { + serial0 = &uart_AO; + }; + + memory { + reg = <0x40000000 0x40000000>; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts new file mode 100644 index 000000000000..a8e2911b2cbe --- /dev/null +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -0,0 +1,67 @@ +/* + * Copyright 2015 Endless Mobile, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "meson8b.dtsi" + +/ { + model = "Hardkernel ODROID-C1"; + compatible = "hardkernel,odroid-c1", "amlogic,meson8b"; + + aliases { + serial0 = &uart_AO; + }; + + memory { + reg = <0x40000000 0x40000000>; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi new file mode 100644 index 000000000000..ee352bf687ff --- /dev/null +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -0,0 +1,186 @@ +/* + * Copyright 2015 Endless Mobile, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/clock/meson8b-clkc.h> +#include <dt-bindings/gpio/meson8b-gpio.h> +#include "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + next-level-cache = <&L2>; + reg = <0x200>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + next-level-cache = <&L2>; + reg = <0x201>; + }; + + cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + next-level-cache = <&L2>; + reg = <0x202>; + }; + + cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + next-level-cache = <&L2>; + reg = <0x203>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + L2: l2-cache-controller@c4200000 { + compatible = "arm,pl310-cache"; + reg = <0xc4200000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + gic: interrupt-controller@c4301000 { + compatible = "arm,cortex-a9-gic"; + reg = <0xc4301000 0x1000>, + <0xc4300100 0x0100>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + timer@c1109940 { + compatible = "amlogic,meson6-timer"; + reg = <0xc1109940 0x18>; + interrupts = <0 10 1>; + }; + + uart_AO: serial@c81004c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81004c0 0x18>; + interrupts = <0 90 1>; + clocks = <&clkc CLKID_CLK81>; + status = "disabled"; + }; + + uart_A: serial@c11084c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc11084c0 0x18>; + interrupts = <0 26 1>; + clocks = <&clkc CLKID_CLK81>; + status = "disabled"; + }; + + uart_B: serial@c11084dc { + compatible = "amlogic,meson-uart"; + reg = <0xc11084dc 0x18>; + interrupts = <0 75 1>; + clocks = <&clkc CLKID_CLK81>; + status = "disabled"; + }; + + uart_C: serial@c1108700 { + compatible = "amlogic,meson-uart"; + reg = <0xc1108700 0x18>; + interrupts = <0 93 1>; + clocks = <&clkc CLKID_CLK81>; + status = "disabled"; + }; + + clkc: clock-controller@c1104000 { + #clock-cells = <1>; + compatible = "amlogic,meson8b-clkc"; + reg = <0xc1108000 0x4>, <0xc1104000 0x460>; + }; + + pinctrl: pinctrl@c1109880 { + compatible = "amlogic,meson8b-pinctrl"; + reg = <0xc1109880 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio: banks@c11080b0 { + reg = <0xc11080b0 0x28>, + <0xc11080e8 0x18>, + <0xc1108120 0x18>, + <0xc1108030 0x38>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_ao: ao-bank@c1108030 { + reg = <0xc8100014 0x4>, + <0xc810002c 0x4>, + <0xc8100024 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; + }; + }; + }; +}; /* end of / */ diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi index ca3402e8240b..52086c8018e2 100644 --- a/arch/arm/boot/dts/mt8127.dtsi +++ b/arch/arm/boot/dts/mt8127.dtsi @@ -23,6 +23,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "mediatek,mt81xx-tz-smp"; cpu@0 { device_type = "cpu"; @@ -47,6 +48,17 @@ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + trustzone-bootinfo@80002000 { + compatible = "mediatek,trustzone-bootinfo"; + reg = <0 0x80002000 0 0x1000>; + }; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -72,6 +84,21 @@ }; }; + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <13000000>; + arm,cpu-registers-not-fw-configured; + }; + soc { #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts index 357a91fc2d1d..460db6d05952 100644 --- a/arch/arm/boot/dts/mt8135-evbp1.dts +++ b/arch/arm/boot/dts/mt8135-evbp1.dts @@ -32,7 +32,6 @@ compatible = "mediatek,mt6397-regulator"; mt6397_vpca15_reg: buck_vpca15 { - regulator-compatible = "buck_vpca15"; regulator-name = "vpca15"; regulator-min-microvolt = < 850000>; regulator-max-microvolt = <1350000>; @@ -41,7 +40,6 @@ }; mt6397_vpca7_reg: buck_vpca7 { - regulator-compatible = "buck_vpca7"; regulator-name = "vpca7"; regulator-min-microvolt = < 850000>; regulator-max-microvolt = <1350000>; @@ -50,7 +48,6 @@ }; mt6397_vsramca15_reg: buck_vsramca15 { - regulator-compatible = "buck_vsramca15"; regulator-name = "vsramca15"; regulator-min-microvolt = < 850000>; regulator-max-microvolt = <1350000>; @@ -59,7 +56,6 @@ }; mt6397_vsramca7_reg: buck_vsramca7 { - regulator-compatible = "buck_vsramca7"; regulator-name = "vsramca7"; regulator-min-microvolt = < 850000>; regulator-max-microvolt = <1350000>; @@ -68,7 +64,6 @@ }; mt6397_vcore_reg: buck_vcore { - regulator-compatible = "buck_vcore"; regulator-name = "vcore"; regulator-min-microvolt = < 850000>; regulator-max-microvolt = <1350000>; @@ -77,7 +72,6 @@ }; mt6397_vgpu_reg: buck_vgpu { - regulator-compatible = "buck_vgpu"; regulator-name = "vgpu"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1350000>; @@ -86,7 +80,6 @@ }; mt6397_vdrm_reg: buck_vdrm { - regulator-compatible = "buck_vdrm"; regulator-name = "vdrm"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1400000>; @@ -95,7 +88,6 @@ }; mt6397_vio18_reg: buck_vio18 { - regulator-compatible = "buck_vio18"; regulator-name = "vio18"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; @@ -104,19 +96,16 @@ }; mt6397_vtcxo_reg: ldo_vtcxo { - regulator-compatible = "ldo_vtcxo"; regulator-name = "vtcxo"; regulator-always-on; }; mt6397_va28_reg: ldo_va28 { - regulator-compatible = "ldo_va28"; regulator-name = "va28"; regulator-always-on; }; mt6397_vcama_reg: ldo_vcama { - regulator-compatible = "ldo_vcama"; regulator-name = "vcama"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <2800000>; @@ -124,18 +113,15 @@ }; mt6397_vio28_reg: ldo_vio28 { - regulator-compatible = "ldo_vio28"; regulator-name = "vio28"; regulator-always-on; }; mt6397_vusb_reg: ldo_vusb { - regulator-compatible = "ldo_vusb"; regulator-name = "vusb"; }; mt6397_vmc_reg: ldo_vmc { - regulator-compatible = "ldo_vmc"; regulator-name = "vmc"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; @@ -143,7 +129,6 @@ }; mt6397_vmch_reg: ldo_vmch { - regulator-compatible = "ldo_vmch"; regulator-name = "vmch"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; @@ -151,7 +136,6 @@ }; mt6397_vemc_3v3_reg: ldo_vemc3v3 { - regulator-compatible = "ldo_vemc3v3"; regulator-name = "vemc_3v3"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; @@ -159,7 +143,6 @@ }; mt6397_vgp1_reg: ldo_vgp1 { - regulator-compatible = "ldo_vgp1"; regulator-name = "vcamd"; regulator-min-microvolt = <1220000>; regulator-max-microvolt = <3300000>; @@ -167,7 +150,6 @@ }; mt6397_vgp2_reg: ldo_vgp2 { - regulator-compatible = "ldo_vgp2"; regulator-name = "vcamio"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; @@ -175,7 +157,6 @@ }; mt6397_vgp3_reg: ldo_vgp3 { - regulator-compatible = "ldo_vgp3"; regulator-name = "vcamaf"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3300000>; @@ -183,7 +164,6 @@ }; mt6397_vgp4_reg: ldo_vgp4 { - regulator-compatible = "ldo_vgp4"; regulator-name = "vgp4"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3300000>; @@ -191,7 +171,6 @@ }; mt6397_vgp5_reg: ldo_vgp5 { - regulator-compatible = "ldo_vgp5"; regulator-name = "vgp5"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3000000>; @@ -199,7 +178,6 @@ }; mt6397_vgp6_reg: ldo_vgp6 { - regulator-compatible = "ldo_vgp6"; regulator-name = "vgp6"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3300000>; @@ -207,7 +185,6 @@ }; mt6397_vibr_reg: ldo_vibr { - regulator-compatible = "ldo_vibr"; regulator-name = "vibr"; regulator-min-microvolt = <1300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi index 08371dbae543..cb99b02d2ccc 100644 --- a/arch/arm/boot/dts/mt8135.dtsi +++ b/arch/arm/boot/dts/mt8135.dtsi @@ -46,6 +46,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "mediatek,mt81xx-tz-smp"; cpu0: cpu@0 { device_type = "cpu"; @@ -72,6 +73,17 @@ }; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + trustzone-bootinfo@80002000 { + compatible = "mediatek,trustzone-bootinfo"; + reg = <0 0x80002000 0 0x1000>; + }; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -97,6 +109,21 @@ }; }; + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <13000000>; + arm,cpu-registers-not-fw-configured; + }; + soc { #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi index 390c91aea16d..ee5a0bb22354 100644 --- a/arch/arm/boot/dts/nspire.dtsi +++ b/arch/arm/boot/dts/nspire.dtsi @@ -16,7 +16,7 @@ cpus { cpu@0 { - compatible = "arm,arm926ejs"; + compatible = "arm,arm926ej-s"; }; }; diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi index c9f1e93a95ae..8491f46c61b7 100644 --- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi +++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi @@ -9,9 +9,9 @@ ocp { i2c@0 { compatible = "i2c-cbus-gpio"; - gpios = <&gpio3 2 0 /* gpio66 clk */ - &gpio3 1 0 /* gpio65 dat */ - &gpio3 0 0 /* gpio64 sel */ + gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */ + &gpio3 1 GPIO_ACTIVE_HIGH /* gpio65 dat */ + &gpio3 0 GPIO_ACTIVE_HIGH /* gpio64 sel */ >; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 7c4dca122a91..73f1e3a8f62c 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -80,7 +80,7 @@ regulator-name = "hsusb2_vbus"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */ startup-delay-us = <70000>; }; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 67659a0ed13e..274c2c482aaa 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -55,7 +55,7 @@ regulator-name = "hsusb2_vbus"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */ startup-delay-us = <70000>; }; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index 4d091ca43e25..8c813e77b17f 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -224,7 +224,7 @@ interrupt-parent = <&gpio2>; interrupts = <25 0>; /* gpio_57 */ - pendown-gpio = <&gpio2 25 0>; + pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi index e84184de2a4a..4813e96157b3 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi @@ -54,7 +54,7 @@ interrupt-parent = <&gpio1>; interrupts = <27 0>; /* gpio_27 */ - pendown-gpio = <&gpio1 27 0>; + pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index b2589f96d5f7..090475083c2f 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -26,7 +26,7 @@ regulator-name = "vwl1271"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&gpio5 22 0>; /* gpio150 */ + gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio150 */ startup-delay-us = <70000>; enable-active-high; vin-supply = <&vmmc2>; @@ -91,7 +91,7 @@ tsc2046@0 { interrupt-parent = <&gpio6>; interrupts = <15 0>; /* gpio175 */ - pendown-gpio = <&gpio6 15 0>; + pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 7166d8876ea8..e14d15e5abc8 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -77,10 +77,10 @@ pinctrl-names = "default"; pinctrl-0 = <&spi_gpio_pins>; - gpio-sck = <&gpio1 12 0>; - gpio-miso = <&gpio1 18 0>; - gpio-mosi = <&gpio1 20 0>; - cs-gpios = <&gpio1 19 0>; + gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; /* lcd panel */ @@ -118,7 +118,7 @@ tv_amp: opa362 { compatible = "ti,opa362"; - enable-gpios = <&gpio1 23 0>; + enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts index 52b386f6865b..600b6ca5a1bd 100644 --- a/arch/arm/boot/dts/omap3-gta04a5.dts +++ b/arch/arm/boot/dts/omap3-gta04a5.dts @@ -12,6 +12,6 @@ model = "Goldelico GTA04A5"; sound { - ti,jack-det-gpio = <&twl_gpio 2 0>; /* GTA04A5 only */ + ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */ }; }; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 2230e1c03320..3caf062f882c 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -1,7 +1,7 @@ /* * Common device tree for IGEP boards based on AM/DM37x * - * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> * * This program is free software; you can redistribute it and/or modify @@ -35,60 +35,60 @@ &omap3_pmx_core { uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ - 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ + OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ >; }; mcbsp2_pins: pinmux_mcbsp2_pins { pinctrl-single,pins = < - 0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ - 0x10e (PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */ - 0x110 (PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */ - 0x112 (PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */ + OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ + OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */ + OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */ + OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ - 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ - 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ - 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ - 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ - 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ >; }; mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < - 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ - 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ - 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ - 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ - 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ - 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ - 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ >; }; i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ - 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ >; }; }; @@ -155,7 +155,7 @@ twl_audio: audio { compatible = "ti,twl4030-audio"; codec { - }; + }; }; }; }; @@ -175,11 +175,11 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - vmmc-supply = <&vmmc1>; - vmmc_aux-supply = <&vsim>; - bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <4>; }; &mmc3 { @@ -187,13 +187,13 @@ }; &uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; }; &uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; }; &twl_gpio { diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index 5ad688c57a00..d90f12c39307 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -1,7 +1,7 @@ /* * Common Device Tree Source for IGEPv2 * - * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> * * This program is free software; you can redistribute it and/or modify @@ -111,40 +111,40 @@ tfp410_pins: pinmux_tfp410_pins { pinctrl-single,pins = < - 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ + OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ >; }; dss_dpi_pins: pinmux_dss_dpi_pins { pinctrl-single,pins = < - 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ - 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ - 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ - 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ - 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ - 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ - 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ - 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ - 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ - 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ - 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ - 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ - 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ - 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ - 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ - 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ - 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ - 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ - 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ - 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ - 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ - 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ - 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ - 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ - 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ - 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ - 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ - 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ >; }; diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 72f7cdc091fb..321c2b7a4e9f 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for IGEPv2 Rev. F (TI OMAP AM/DM37x) * - * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index fea7f7edb45d..3835e1569c29 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x) * - * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> * * This program is free software; you can redistribute it and/or modify @@ -45,15 +45,6 @@ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */ >; }; - - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */ - OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/ - OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ - OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ - >; - }; }; /* On board Wifi module */ diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi index 0cb1527c39d4..640f06603966 100644 --- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi @@ -1,7 +1,7 @@ /* * Common Device Tree Source for IGEP COM MODULE * - * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index b899e341874a..76dc08868bfb 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x) * - * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 8150f47ccdf5..468608dab30a 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x) * - * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index bd6e6769c7ce..d2fab8c0d4f8 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -200,7 +200,7 @@ tsc2046@0 { interrupt-parent = <&gpio2>; interrupts = <22 0>; /* gpio54 */ - pendown-gpio = <&gpio2 22 0>; + pendown-gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index d0dd0365bfda..57d7c93cc72b 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -284,7 +284,7 @@ }; &mmc1 { - cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>; + cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; cd-inverted; vmmc-supply = <&vmmc1>; bus-width = <4>; @@ -314,7 +314,7 @@ interrupt-parent = <&gpio1>; interrupts = <8 0>; /* boot6 / gpio_8 */ spi-max-frequency = <1000000>; - pendown-gpio = <&gpio1 8 0>; + pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; vcc-supply = <®_vcc3>; pinctrl-names = "default"; pinctrl-0 = <&tsc2048_pins>; diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts index 834f7c65f62d..0e3c9812f4e3 100644 --- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts +++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts @@ -114,8 +114,8 @@ status = "okay"; bus-width = <4>; vmmc-supply = <&vmmc1>; - cd-gpios = <&gpio6 4 0>; /* gpio_164 */ - wp-gpios = <&gpio6 3 0>; /* gpio_163 */ + cd-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio_164 */ + wp-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* gpio_163 */ pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; ti,dual-volt; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 800b379d368d..e9ee1df0e467 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -27,7 +27,7 @@ regulator-name = "VEMMC"; regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; - gpio = <&gpio5 29 0>; /* gpio line 157 */ + gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */ startup-delay-us = <150>; enable-active-high; }; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index 28430f1596f2..a29ad16cc9bb 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -35,7 +35,7 @@ regulator-name = "hsusb2_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio6 8 0>; /* gpio_168: vbus enable */ + gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>; /* gpio_168: vbus enable */ startup-delay-us = <70000>; enable-active-high; }; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 80d236ac64a5..b09cedf66117 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -152,7 +152,7 @@ interrupt-parent = <&gpio4>; interrupts = <18 0>; /* gpio_114 */ - pendown-gpio = <&gpio4 18 0>; + pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index 048fd216970a..5f979590571b 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -163,7 +163,7 @@ interrupt-parent = <&gpio4>; interrupts = <18 0>; /* gpio_114 */ - pendown-gpio = <&gpio4 18 0>; + pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index f2084e6d01e7..cfe140c657e7 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -218,7 +218,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio6 4 0>; /* GPIO_164 */ + gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */ }; /* wg7210 (wifi+bt module) 32k clock buffer */ @@ -607,7 +607,7 @@ pinctrl-0 = <&penirq_pins>; interrupt-parent = <&gpio3>; interrupts = <30 0>; /* GPIO_94 */ - pendown-gpio = <&gpio3 30 0>; + pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; vcc-supply = <&vaux4>; ti,x-min = /bits/ 16 <0>; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index 7bd8d9a4f67f..ae5dbbd9d569 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -37,7 +37,7 @@ regulator-name = "hsusb2_vbus"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */ startup-delay-us = <70000>; }; @@ -225,7 +225,7 @@ pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; - cd-gpios = <&twl_gpio 0 0>; + cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index 131448d86e67..7bc5fdd6981e 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -44,7 +44,7 @@ regulator-name = "vwl1271"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&gpio4 5 0>; /* gpio101 */ + gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ startup-delay-us = <70000>; enable-active-high; }; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index f1507bc8737e..18d096696fc0 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -68,7 +68,7 @@ regulator-name = "hsusb1_vbus"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio1 1 0>; /* gpio_1 */ + gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; /* gpio_1 */ startup-delay-us = <70000>; enable-active-high; /* @@ -98,7 +98,7 @@ regulator-name = "vwl1271"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&gpio2 11 0>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; startup-delay-us = <70000>; enable-active-high; }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index dac86ed7481f..f0bdc41f8eff 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -30,7 +30,7 @@ regulator-name = "VDD_ETH"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio2 16 0>; /* gpio line 48 */ + gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */ enable-active-high; regulator-boot-on; }; @@ -155,7 +155,7 @@ regulator-name = "vwl1271"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&gpio2 22 0>; + gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>; startup-delay-us = <70000>; enable-active-high; }; @@ -374,7 +374,7 @@ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ - ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */ vio-supply = <&v1v8>; v2v1-supply = <&v2v1>; diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi index 9bceeb7e1f03..1c5f6f35e1cf 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi @@ -15,7 +15,7 @@ regulator-name = "vwl1271"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&gpio2 11 0>; /* gpio 43 */ + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; /* gpio 43 */ startup-delay-us = <70000>; enable-active-high; }; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index a4f1ba2e1903..49d032b846be 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -196,7 +196,7 @@ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ - ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */ + ti,audpwron-gpio = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio 182 */ vio-supply = <&v1v8>; v2v1-supply = <&v2v1>; diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index 194f9ef0a009..5fa68f191af7 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -46,7 +46,7 @@ 0x4a002378 0x18>; compatible = "ti,omap4460-bandgap"; interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */ - gpios = <&gpio3 22 0>; /* tshut */ + gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* tshut */ #thermal-sensor-cells = <0>; }; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi new file mode 100644 index 000000000000..5cf76a1c5c75 --- /dev/null +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -0,0 +1,655 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include "omap5.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + aliases { + display0 = &hdmi0; + }; + + vmmcsd_fixed: fixedregulator-mmcsd { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + mmc3_pwrseq: sdhci0_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&clk32kgaudio>; + clock-names = "ext_clock"; + }; + + vmmcsdio_fixed: fixedregulator-mmcsdio { + compatible = "regulator-fixed"; + regulator-name = "vmmcsdio_fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>; /* gpio140 WLAN_EN */ + enable-active-high; + startup-delay-us = <70000>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_pins>; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */ + clocks = <&auxclk1_ck>; + clock-names = "main_clk"; + clock-frequency = <19200000>; + }; + + /* HS USB Host PHY on PORT 3 */ + hsusb3_phy: hsusb3_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */ + }; + + leds { + compatible = "gpio-leds"; + led@1 { + label = "omap5:blue:usr1"; + gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + tpd12s015: encoder@0 { + compatible = "ti,tpd12s015"; + + pinctrl-names = "default"; + pinctrl-0 = <&tpd12s015_pins>; + + /* gpios defined in the board specific dts */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint@0 { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint@0 { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + + hdmi0: connector@0 { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "b"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; + + sound: sound { + compatible = "ti,abe-twl6040"; + ti,model = "omap5-uevm"; + + ti,mclk-freq = <19200000>; + + ti,mcpdm = <&mcpdm>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "AFML", "Line In", + "AFMR", "Line In"; + }; +}; + +&omap5_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &usbhost_pins + &led_gpio_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + 0x17e (PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ + 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */ + 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */ + 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */ + 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */ + 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */ + 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */ + 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */ + 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */ + 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */ + 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + + mcspi2_pins: pinmux_mcspi2_pins { + pinctrl-single,pins = < + 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ + 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ + 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */ + 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */ + >; + }; + + mcspi3_pins: pinmux_mcspi3_pins { + pinctrl-single,pins = < + 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi3_somi */ + 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */ + 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi3_simo */ + 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi3_clk */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */ + OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */ + OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */ + OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */ + OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */ + OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */ + >; + }; + + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */ + >; + }; + + usbhost_pins: pinmux_usbhost_pins { + pinctrl-single,pins = < + 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ + 0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ + + 0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */ + 0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */ + + 0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */ + 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */ + >; + }; + + led_gpio_pins: pinmux_led_gpio_pins { + pinctrl-single,pins = < + 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */ + 0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */ + 0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */ + 0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */ + 0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */ + >; + }; + + uart5_pins: pinmux_uart5_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */ + 0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */ + 0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */ + 0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */ + >; + }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + 0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ + 0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ + >; + }; +}; + +&omap5_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &usbhost_wkup_pins + >; + + usbhost_wkup_pins: pinmux_usbhost_wkup_pins { + pinctrl-single,pins = < + 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ + >; + }; + + wlcore_irq_pin: pinmux_wlcore_irq_pin { + pinctrl-single,pins = < + OMAP5_IOPAD(0x040, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ + >; + }; +}; + +&mmc1 { + vmmc-supply = <&ldo9_reg>; + bus-width = <4>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + vmmc-supply = <&vmmcsdio_fixed>; + mmc-pwrseq = <&mmc3_pwrseq>; + bus-width = <4>; + non-removable; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wlcore_irq_pin>; + interrupts-extended = <&gic GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH + &omap5_pmx_core 0x168>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */ + ref-clock-frequency = <26000000>; + }; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "disabled"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + palmas: palmas@48 { + compatible = "ti,palmas"; + interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ + reg = <0x48>; + interrupt-controller; + #interrupt-cells = <2>; + ti,system-power-controller; + + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + ti,enable-id-detection; + ti,wakeup; + }; + + clk32kgaudio: palmas_clk32k@1 { + compatible = "ti,palmas-clk32kgaudio"; + #clock-cells = <0>; + }; + + palmas_pmic { + compatible = "ti,palmas-pmic"; + interrupt-parent = <&palmas>; + interrupts = <14 IRQ_TYPE_NONE>; + interrupt-name = "short-irq"; + + ti,ldo6-vibrator; + + regulators { + smps123_reg: smps123 { + /* VDD_OPP_MPU */ + regulator-name = "smps123"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45_reg: smps45 { + /* VDD_OPP_MM */ + regulator-name = "smps45"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6_reg: smps6 { + /* VDD_DDR3 - over VDD_SMPS6 */ + regulator-name = "smps6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + smps7_reg: smps7 { + /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */ + regulator-name = "smps7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8_reg: smps8 { + /* VDD_OPP_CORE */ + regulator-name = "smps8"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + regulator-always-on; + regulator-boot-on; + }; + + smps9_reg: smps9 { + /* VDDA_2v1_AUD over VDD_2v1 */ + regulator-name = "smps9"; + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + ti,smps-range = <0x80>; + }; + + smps10_out2_reg: smps10_out2 { + /* VBUS_5V_OTG */ + regulator-name = "smps10_out2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps10_out1_reg: smps10_out1 { + /* VBUS_5V_OTG */ + regulator-name = "smps10_out1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + ldo1_reg: ldo1 { + /* VDDAPHY_CAM: vdda_csiport */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2_reg: ldo2 { + /* VCC_2V8_DISP: Does not go anywhere */ + regulator-name = "ldo2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + /* Unused */ + status = "disabled"; + }; + + ldo3_reg: ldo3 { + /* VDDAPHY_MDM: vdda_lli */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + /* Only if Modem is used */ + status = "disabled"; + }; + + ldo4_reg: ldo4 { + /* VDDAPHY_DISP: vdda_dsiport/hdmi */ + regulator-name = "ldo4"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PHY: usb/sata/hdmi.. */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6_reg: ldo6 { + /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ + regulator-name = "ldo6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo7_reg: ldo7 { + /* VDD_VPP: vpp1 */ + regulator-name = "ldo7"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + /* Only for efuse reprograming! */ + status = "disabled"; + }; + + ldo8_reg: ldo8 { + /* VDD_3v0: Does not go anywhere */ + regulator-name = "ldo8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + /* Unused */ + status = "disabled"; + }; + + ldo9_reg: ldo9 { + /* VCC_DV_SDIO: vdds_sdcard */ + regulator-name = "ldo9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + }; + + ldoln_reg: ldoln { + /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */ + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldousb"; + regulator-min-microvolt = <3250000>; + regulator-max-microvolt = <3250000>; + regulator-always-on; + regulator-boot-on; + }; + + regen3_reg: regen3 { + /* REGEN3 controls LDO9 supply to card */ + regulator-name = "regen3"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + palmas_power_button: palmas_power_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&palmas>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + + pinctrl-names = "default"; + pinctrl-0 = <&twl6040_pins>; + + interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */ + ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */ + + vio-supply = <&smps7_reg>; + v2v1-supply = <&smps9_reg>; + enable-active-high; + + clocks = <&clk32kgaudio>; + clock-names = "clk32k"; + }; +}; + +&mcpdm { + pinctrl-names = "default"; + pinctrl-0 = <&mcpdm_pins>; + status = "okay"; +}; + +&mcbsp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_pins>; + status = "okay"; +}; + +&mcbsp2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; + status = "okay"; +}; + +&usbhshost { + port2-mode = "ehci-hsic"; + port3-mode = "ehci-hsic"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy &hsusb3_phy>; +}; + +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; +}; + +&mcspi1 { + +}; + +&mcspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi2_pins>; +}; + +&mcspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi3_pins>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <&omap5_pmx_core 0x19c>; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins>; +}; + +&cpu0 { + cpu0-supply = <&smps123_reg>; +}; + +&dss { + status = "ok"; +}; + +&hdmi { + status = "ok"; + + /* vdda-supply populated in board specific dts file */ + + pinctrl-names = "default"; + pinctrl-0 = <&dss_hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 61ad2ea34720..3774b37be6c8 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -344,7 +344,7 @@ interrupt-parent = <&gpio1>; interrupts = <15 0>; /* gpio1_wk15 */ - pendown-gpio = <&gpio1 15 0>; + pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; ti,x-min = /bits/ 16 <0x0>; diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts new file mode 100644 index 000000000000..46ecb1dd3b5c --- /dev/null +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap5-board-common.dtsi" + +/ { + model = "IGEPv5"; + compatible = "isee,omap5-igep0050", "ti,omap5"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x7f000000>; /* 2032 MB */ + }; +}; + +&hdmi { + vdda-supply = <&ldo7_reg>; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + + tca6416: tca6416@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&omap5_pmx_core { + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* i2c4_scl */ + OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0) /* i2c4_sda */ + >; + }; +}; + +&tpd12s015 { + gpios = <&tca6416 11 0>, /* TCA6416 P01, CT_CP_HDP */ + <&tca6416 12 0>, /* TCA6416 P00, LS_OE*/ + <&gpio7 1 0>, /* 193, HPD */ + <&gpio7 2 0>, /* 194, SCL */ + <&gpio7 3 0>; /* 195, SDA */ +}; + diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 3cb030f9d2c4..05b1c1ebded8 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -7,9 +7,7 @@ */ /dts-v1/; -#include "omap5.dtsi" -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "omap5-board-common.dtsi" / { model = "TI OMAP5 uEVM board"; @@ -19,523 +17,10 @@ device_type = "memory"; reg = <0x80000000 0x7F000000>; /* 2032 MB */ }; - - aliases { - display0 = &hdmi0; - }; - - vmmcsd_fixed: fixedregulator-mmcsd { - compatible = "regulator-fixed"; - regulator-name = "vmmcsd_fixed"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - /* HS USB Host PHY on PORT 2 */ - hsusb2_phy: hsusb2_phy { - compatible = "usb-nop-xceiv"; - reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */ - clocks = <&auxclk1_ck>; - clock-names = "main_clk"; - clock-frequency = <19200000>; - }; - - /* HS USB Host PHY on PORT 3 */ - hsusb3_phy: hsusb3_phy { - compatible = "usb-nop-xceiv"; - reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */ - }; - - leds { - compatible = "gpio-leds"; - led@1 { - label = "omap5:blue:usr1"; - gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */ - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - }; - - tpd12s015: encoder@0 { - compatible = "ti,tpd12s015"; - - pinctrl-names = "default"; - pinctrl-0 = <&tpd12s015_pins>; - - gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */ - <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */ - <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */ - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tpd12s015_in: endpoint@0 { - remote-endpoint = <&hdmi_out>; - }; - }; - - port@1 { - reg = <1>; - - tpd12s015_out: endpoint@0 { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; - }; - - hdmi0: connector@0 { - compatible = "hdmi-connector"; - label = "hdmi"; - - type = "b"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&tpd12s015_out>; - }; - }; - }; - - sound: sound { - compatible = "ti,abe-twl6040"; - ti,model = "omap5-uevm"; - - ti,mclk-freq = <19200000>; - - ti,mcpdm = <&mcpdm>; - - ti,twl6040 = <&twl6040>; - - /* Audio routing */ - ti,audio-routing = - "Headset Stereophone", "HSOL", - "Headset Stereophone", "HSOR", - "Line Out", "AUXL", - "Line Out", "AUXR", - "HSMIC", "Headset Mic", - "Headset Mic", "Headset Mic Bias", - "AFML", "Line In", - "AFMR", "Line In"; - }; -}; - -&omap5_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = < - &usbhost_pins - &led_gpio_pins - >; - - twl6040_pins: pinmux_twl6040_pins { - pinctrl-single,pins = < - 0x17e (PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ - >; - }; - - mcpdm_pins: pinmux_mcpdm_pins { - pinctrl-single,pins = < - 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ - 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */ - 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */ - 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */ - 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */ - >; - }; - - mcbsp1_pins: pinmux_mcbsp1_pins { - pinctrl-single,pins = < - 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */ - 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */ - 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */ - 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */ - >; - }; - - mcbsp2_pins: pinmux_mcbsp2_pins { - pinctrl-single,pins = < - 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */ - 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */ - 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */ - 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */ - >; - }; - - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ - 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ - >; - }; - - i2c5_pins: pinmux_i2c5_pins { - pinctrl-single,pins = < - 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */ - 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */ - >; - }; - - mcspi2_pins: pinmux_mcspi2_pins { - pinctrl-single,pins = < - 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ - 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ - 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */ - 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */ - >; - }; - - mcspi3_pins: pinmux_mcspi3_pins { - pinctrl-single,pins = < - 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi3_somi */ - 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */ - 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi3_simo */ - 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi3_clk */ - >; - }; - - mcspi4_pins: pinmux_mcspi4_pins { - pinctrl-single,pins = < - 0x164 (PIN_INPUT | MUX_MODE1) /* mcspi4_clk */ - 0x168 (PIN_INPUT | MUX_MODE1) /* mcspi4_simo */ - 0x16a (PIN_INPUT | MUX_MODE1) /* mcspi4_somi */ - 0x16c (PIN_INPUT | MUX_MODE1) /* mcspi4_cs0 */ - >; - }; - - usbhost_pins: pinmux_usbhost_pins { - pinctrl-single,pins = < - 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ - 0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ - - 0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */ - 0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */ - - 0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */ - 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */ - >; - }; - - led_gpio_pins: pinmux_led_gpio_pins { - pinctrl-single,pins = < - 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */ - >; - }; - - uart1_pins: pinmux_uart1_pins { - pinctrl-single,pins = < - 0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */ - 0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */ - 0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */ - 0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */ - >; - }; - - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - 0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */ - 0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */ - >; - }; - - uart5_pins: pinmux_uart5_pins { - pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */ - 0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */ - 0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */ - 0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */ - >; - }; - - dss_hdmi_pins: pinmux_dss_hdmi_pins { - pinctrl-single,pins = < - 0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ - 0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ - 0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ - >; - }; - - tpd12s015_pins: pinmux_tpd12s015_pins { - pinctrl-single,pins = < - 0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ - >; - }; -}; - -&omap5_pmx_wkup { - pinctrl-names = "default"; - pinctrl-0 = < - &usbhost_wkup_pins - >; - - usbhost_wkup_pins: pinmux_usbhost_wkup_pins { - pinctrl-single,pins = < - 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ - >; - }; -}; - -&mmc1 { - vmmc-supply = <&ldo9_reg>; - bus-width = <4>; -}; - -&mmc2 { - vmmc-supply = <&vmmcsd_fixed>; - bus-width = <8>; - ti,non-removable; -}; - -&mmc3 { - bus-width = <4>; - ti,non-removable; -}; - -&mmc4 { - status = "disabled"; }; -&mmc5 { - status = "disabled"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - - clock-frequency = <400000>; - - palmas: palmas@48 { - compatible = "ti,palmas"; - interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ - reg = <0x48>; - interrupt-controller; - #interrupt-cells = <2>; - ti,system-power-controller; - - extcon_usb3: palmas_usb { - compatible = "ti,palmas-usb-vid"; - ti,enable-vbus-detection; - ti,enable-id-detection; - ti,wakeup; - }; - - clk32kgaudio: palmas_clk32k@1 { - compatible = "ti,palmas-clk32kgaudio"; - #clock-cells = <0>; - }; - - palmas_pmic { - compatible = "ti,palmas-pmic"; - interrupt-parent = <&palmas>; - interrupts = <14 IRQ_TYPE_NONE>; - interrupt-name = "short-irq"; - - ti,ldo6-vibrator; - - regulators { - smps123_reg: smps123 { - /* VDD_OPP_MPU */ - regulator-name = "smps123"; - regulator-min-microvolt = < 600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - smps45_reg: smps45 { - /* VDD_OPP_MM */ - regulator-name = "smps45"; - regulator-min-microvolt = < 600000>; - regulator-max-microvolt = <1310000>; - regulator-always-on; - regulator-boot-on; - }; - - smps6_reg: smps6 { - /* VDD_DDR3 - over VDD_SMPS6 */ - regulator-name = "smps6"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - smps7_reg: smps7 { - /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */ - regulator-name = "smps7"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - smps8_reg: smps8 { - /* VDD_OPP_CORE */ - regulator-name = "smps8"; - regulator-min-microvolt = < 600000>; - regulator-max-microvolt = <1310000>; - regulator-always-on; - regulator-boot-on; - }; - - smps9_reg: smps9 { - /* VDDA_2v1_AUD over VDD_2v1 */ - regulator-name = "smps9"; - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2100000>; - ti,smps-range = <0x80>; - }; - - smps10_out2_reg: smps10_out2 { - /* VBUS_5V_OTG */ - regulator-name = "smps10_out2"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - smps10_out1_reg: smps10_out1 { - /* VBUS_5V_OTG */ - regulator-name = "smps10_out1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - ldo1_reg: ldo1 { - /* VDDAPHY_CAM: vdda_csiport */ - regulator-name = "ldo1"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1800000>; - }; - - ldo2_reg: ldo2 { - /* VCC_2V8_DISP: Does not go anywhere */ - regulator-name = "ldo2"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - /* Unused */ - status = "disabled"; - }; - - ldo3_reg: ldo3 { - /* VDDAPHY_MDM: vdda_lli */ - regulator-name = "ldo3"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - /* Only if Modem is used */ - status = "disabled"; - }; - - ldo4_reg: ldo4 { - /* VDDAPHY_DISP: vdda_dsiport/hdmi */ - regulator-name = "ldo4"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1800000>; - }; - - ldo5_reg: ldo5 { - /* VDDA_1V8_PHY: usb/sata/hdmi.. */ - regulator-name = "ldo5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo6_reg: ldo6 { - /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ - regulator-name = "ldo6"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo7_reg: ldo7 { - /* VDD_VPP: vpp1 */ - regulator-name = "ldo7"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - /* Only for efuse reprograming! */ - status = "disabled"; - }; - - ldo8_reg: ldo8 { - /* VDD_3v0: Does not go anywhere */ - regulator-name = "ldo8"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - /* Unused */ - status = "disabled"; - }; - - ldo9_reg: ldo9 { - /* VCC_DV_SDIO: vdds_sdcard */ - regulator-name = "ldo9"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - }; - - ldoln_reg: ldoln { - /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */ - regulator-name = "ldoln"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldousb_reg: ldousb { - /* VDDA_3V_USB: VDDA_USBHS33 */ - regulator-name = "ldousb"; - regulator-min-microvolt = <3250000>; - regulator-max-microvolt = <3250000>; - regulator-always-on; - regulator-boot-on; - }; - - regen3_reg: regen3 { - /* REGEN3 controls LDO9 supply to card */ - regulator-name = "regen3"; - regulator-always-on; - regulator-boot-on; - }; - }; - }; - - palmas_power_button: palmas_power_button { - compatible = "ti,palmas-pwrbutton"; - interrupt-parent = <&palmas>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - wakeup-source; - }; - }; - - twl6040: twl@4b { - compatible = "ti,twl6040"; - reg = <0x4b>; - - pinctrl-names = "default"; - pinctrl-0 = <&twl6040_pins>; - - interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */ - ti,audpwron-gpio = <&gpio5 13 0>; /* gpio line 141 */ - - vio-supply = <&smps7_reg>; - v2v1-supply = <&smps9_reg>; - enable-active-high; - - clocks = <&clk32kgaudio>; - clock-names = "clk32k"; - }; +&hdmi { + vdda-supply = <&ldo4_reg>; }; &i2c5 { @@ -552,92 +37,17 @@ }; }; -&mcpdm { - pinctrl-names = "default"; - pinctrl-0 = <&mcpdm_pins>; - status = "okay"; -}; - -&mcbsp1 { - pinctrl-names = "default"; - pinctrl-0 = <&mcbsp1_pins>; - status = "okay"; -}; - -&mcbsp2 { - pinctrl-names = "default"; - pinctrl-0 = <&mcbsp2_pins>; - status = "okay"; -}; - -&usbhshost { - port2-mode = "ehci-hsic"; - port3-mode = "ehci-hsic"; -}; - -&usbhsehci { - phys = <0 &hsusb2_phy &hsusb3_phy>; -}; - -&usb3 { - extcon = <&extcon_usb3>; - vbus-supply = <&smps10_out1_reg>; -}; - -&mcspi1 { - -}; - -&mcspi2 { - pinctrl-names = "default"; - pinctrl-0 = <&mcspi2_pins>; -}; - -&mcspi3 { - pinctrl-names = "default"; - pinctrl-0 = <&mcspi3_pins>; -}; - -&mcspi4 { - pinctrl-names = "default"; - pinctrl-0 = <&mcspi4_pins>; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; - interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, - <&omap5_pmx_core 0x19c>; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&uart5_pins>; -}; - -&cpu0 { - cpu0-supply = <&smps123_reg>; -}; - -&dss { - status = "ok"; +&omap5_pmx_core { + i2c5_pins: pinmux_i2c5_pins { + pinctrl-single,pins = < + 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */ + 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */ + >; + }; }; -&hdmi { - status = "ok"; - vdda-supply = <&ldo4_reg>; - - pinctrl-names = "default"; - pinctrl-0 = <&dss_hdmi_pins>; - - port { - hdmi_out: endpoint { - remote-endpoint = <&tpd12s015_in>; - }; - }; +&tpd12s015 { + gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */ + <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */ + <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */ }; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index 75cd01bd6024..e1b6d2a2ac49 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -212,6 +212,16 @@ status = "disabled"; }; + cesa: crypto@90000 { + compatible = "marvell,orion-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <28>; + marvell,crypto-srams = <&crypto_sram>; + marvell,crypto-sram-size = <0x800>; + status = "okay"; + }; + ehci1: ehci@a0000 { compatible = "marvell,orion-ehci"; reg = <0xa0000 0x1000>; @@ -220,13 +230,11 @@ }; }; - cesa: crypto@90000 { - compatible = "marvell,orion-crypto"; - reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>, - <MBUS_ID(0x09, 0x00) 0x0 0x800>; - reg-names = "regs", "sram"; - interrupts = <28>; - status = "okay"; + crypto_sram: sa-sram { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x00) 0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 47c0282bdfca..03784f1366e5 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -1,4 +1,6 @@ #include "qcom-apq8064-v2.0.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { model = "CompuLab CM-QS600"; @@ -12,12 +14,27 @@ stdout-path = "serial0:115200n8"; }; + pwrseq { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + sdcc4_pwrseq: sdcc4_pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; + }; + }; + soc { pinctrl@800000 { - i2c1_pins: i2c1 { + card_detect: card_detect { mux { - pins = "gpio20", "gpio21"; - function = "gsbi1"; + pins = "gpio26"; + function = "gpio"; + bias-disable; }; }; }; @@ -96,10 +113,8 @@ i2c@12460000 { status = "okay"; clock-frequency = <200000>; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - eeprom: eeprom@50 { + eeprom@50 { compatible = "24c02"; reg = <0x50>; pagesize = <32>; @@ -112,6 +127,8 @@ qcom,mode = <GSBI_PROT_I2C_UART>; serial@16640000 { status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&gsbi7_uart_2pins>; }; }; @@ -163,6 +180,21 @@ regulator-always-on; }; + qcom,ssbi@500000 { + pmic@0 { + gpio@150 { + wlan_default_gpios: wlan-gpios { + pios { + pins = "gpio43"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + }; + }; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { @@ -175,12 +207,16 @@ sdcc3: sdcc@12180000 { status = "okay"; vmmc-supply = <&v3p3_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&card_detect>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; }; /* WLAN */ sdcc4: sdcc@121c0000 { status = "okay"; vmmc-supply = <&v3p3_fixed>; vqmmc-supply = <&v3p3_fixed>; + mmc-pwrseq = <&sdcc4_pwrseq>; }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index f3100da082b2..11ac608b6d50 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -1,5 +1,6 @@ #include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { model = "Qualcomm APQ8064/IFC6410"; @@ -14,6 +15,29 @@ stdout-path = "serial0:115200n8"; }; + pwrseq { + compatible = "simple-bus"; + + sdcc4_pwrseq: sdcc4_pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <¬ify_led>; + + led@1 { + label = "apq8064:green:user1"; + gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + soc { pinctrl@800000 { card_detect: card_detect { @@ -119,8 +143,6 @@ qcom,mode = <GSBI_PROT_I2C>; i2c3: i2c@16280000 { status = "okay"; - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; }; }; @@ -131,10 +153,8 @@ i2c@12460000 { status = "okay"; clock-frequency = <200000>; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - eeprom: eeprom@52 { + eeprom@52 { compatible = "atmel,24c128"; reg = <0x52>; pagesize = <32>; @@ -148,9 +168,8 @@ serial@16540000 { status = "ok"; - pinctrl-names = "default"; - pinctrl-0 = <&uart_pins>; + pinctrl-0 = <&gsbi6_uart_4pins>; }; }; @@ -159,6 +178,8 @@ qcom,mode = <GSBI_PROT_I2C_UART>; serial@16640000 { status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&gsbi7_uart_2pins>; }; }; @@ -210,6 +231,30 @@ status = "okay"; }; + qcom,ssbi@500000 { + pmic@0 { + gpio@150 { + wlan_default_gpios: wlan-gpios { + pios { + pins = "gpio43"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + + notify_led: nled { + pios { + pins = "gpio18"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + }; + }; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { @@ -231,6 +276,7 @@ status = "okay"; vmmc-supply = <&ext_3p3v>; vqmmc-supply = <&pm8921_lvs1>; + mmc-pwrseq = <&sdcc4_pwrseq>; }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index d2e94d647c27..a4c1762b53ea 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -127,12 +127,33 @@ }; }; - uart_pins: uart_pins { + gsbi6_uart_2pins: gsbi6_uart_2pins { + mux { + pins = "gpio14", "gpio15"; + function = "gsbi6"; + }; + }; + + gsbi6_uart_4pins: gsbi6_uart_4pins { mux { pins = "gpio14", "gpio15", "gpio16", "gpio17"; function = "gsbi6"; }; }; + + gsbi7_uart_2pins: gsbi7_uart_2pins { + mux { + pins = "gpio82", "gpio83"; + function = "gsbi7"; + }; + }; + + gsbi7_uart_4pins: gsbi7_uart_4pins { + mux { + pins = "gpio82", "gpio83", "gpio84", "gpio85"; + function = "gsbi7"; + }; + }; }; intc: interrupt-controller@2000000 { @@ -213,6 +234,8 @@ i2c1: i2c@12460000 { compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; reg = <0x12460000 0x1000>; interrupts = <0 194 IRQ_TYPE_NONE>; clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; @@ -258,6 +281,8 @@ ranges; i2c3: i2c@16280000 { compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; reg = <0x16280000 0x1000>; interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; clocks = <&gcc GSBI3_QUP_CLK>, @@ -361,6 +386,22 @@ <136 1>, <137 1>, <138 1>, <139 1>; }; + rtc@11d { + compatible = "qcom,pm8921-rtc"; + interrupt-parent = <&pmicintc>; + interrupts = <39 1>; + reg = <0x11d>; + allow-set-time; + }; + + pwrkey@1c { + compatible = "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupt-parent = <&pmicintc>; + interrupts = <50 1>, <51 1>; + debounce = <15625>; + pull-up; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 0554fbd72c40..fcffecae3e67 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -221,6 +221,7 @@ compatible = "qcom,gcc-apq8084"; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; reg = <0xfc400000 0x4000>; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index ab8e57250468..753bdfddd46e 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -100,6 +100,15 @@ clock-frequency = <19200000>; }; + smem { + compatible = "qcom,smem"; + + memory-region = <&smem_region>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + + hwlocks = <&tcsr_mutex 3>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -114,6 +123,11 @@ <0xf9002000 0x1000>; }; + apcs: syscon@f9011000 { + compatible = "syscon"; + reg = <0xf9011000 0x1000>; + }; + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -228,6 +242,7 @@ compatible = "qcom,gcc-msm8974"; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; reg = <0xfc400000 0x4000>; }; @@ -240,6 +255,7 @@ compatible = "qcom,mmcc-msm8974"; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; reg = <0xfd8c0000 0x6000>; }; @@ -250,13 +266,9 @@ #hwlock-cells = <1>; }; - smem@fa00000 { - compatible = "qcom,smem"; - - memory-region = <&smem_region>; + rpm_msg_ram: memory@fc428000 { + compatible = "qcom,rpm-msg-ram"; reg = <0xfc428000 0x4000>; - - hwlocks = <&tcsr_mutex 3>; }; blsp1_uart2: serial@f991e000 { @@ -308,7 +320,7 @@ }; blsp_i2c11: i2c@f9967000 { - status = "disable"; + status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9967000 0x1000>; interrupts = <0 105 IRQ_TYPE_NONE>; @@ -334,4 +346,73 @@ #interrupt-cells = <4>; }; }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <0 168 1>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 {}; + pm8841_s2: s2 {}; + pm8841_s3: s3 {}; + pm8841_s4: s4 {}; + pm8841_s5: s5 {}; + pm8841_s6: s6 {}; + pm8841_s7: s7 {}; + pm8841_s8: s8 {}; + }; + + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + pm8941_s1: s1 {}; + pm8941_s2: s2 {}; + pm8941_s3: s3 {}; + pm8941_5v: s4 {}; + + pm8941_l1: l1 {}; + pm8941_l2: l2 {}; + pm8941_l3: l3 {}; + pm8941_l4: l4 {}; + pm8941_l5: l5 {}; + pm8941_l6: l6 {}; + pm8941_l7: l7 {}; + pm8941_l8: l8 {}; + pm8941_l9: l9 {}; + pm8941_l10: l10 {}; + pm8941_l11: l11 {}; + pm8941_l12: l12 {}; + pm8941_l13: l13 {}; + pm8941_l14: l14 {}; + pm8941_l15: l15 {}; + pm8941_l16: l16 {}; + pm8941_l17: l17 {}; + pm8941_l18: l18 {}; + pm8941_l19: l19 {}; + pm8941_l20: l20 {}; + pm8941_l21: l21 {}; + pm8941_l22: l22 {}; + pm8941_l23: l23 {}; + pm8941_l24: l24 {}; + + pm8941_lvs1: lvs1 {}; + pm8941_lvs2: lvs2 {}; + pm8941_lvs3: lvs3 {}; + + pm8941_5vs1: 5vs1 {}; + pm8941_5vs2: 5vs2 {}; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index 968f1043d4f5..b0d443999fcc 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -26,6 +26,27 @@ bias-pull-up; }; + charger@1000 { + compatible = "qcom,pm8941-charger"; + reg = <0x1000 0x700>; + interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "chg-done", + "chg-fast", + "chg-trkl", + "bat-temp-ok", + "bat-present", + "chg-gone", + "usb-valid", + "dc-valid"; + }; + pm8941_gpios: gpios@c000 { compatible = "qcom,pm8941-gpio"; reg = <0xc000 0x2400>; @@ -120,8 +141,7 @@ pm8941_iadc: iadc@3600 { compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc"; - reg = <0x3600 0x100>, - <0x12f1 0x1>; + reg = <0x3600 0x100>; interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; qcom,external-resistor-micro-ohms = <10000>; }; diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts deleted file mode 100644 index dffa6ff30360..000000000000 --- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Reference Device Tree Source for the Bock-W board - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * based on r8a7779 - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "r8a7778.dtsi" -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "bockw"; - compatible = "renesas,bockw-reference", "renesas,r8a7778"; - - aliases { - serial0 = &scif0; - }; - - chosen { - bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw"; - stdout-path = &scif0; - }; - - memory { - device_type = "memory"; - reg = <0x60000000 0x10000000>; - }; - - fixedregulator3v3: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ethernet@18300000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x18300000 0x1000>; - - phy-mode = "mii"; - interrupt-parent = <&irqpin>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; - reg-io-width = <4>; - vddvario-supply = <&fixedregulator3v3>; - vdd33a-supply = <&fixedregulator3v3>; - }; - -}; - -&mmcif { - pinctrl-0 = <&mmc_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&fixedregulator3v3>; - bus-width = <8>; - broken-cd; - status = "okay"; -}; - -&irqpin { - status = "okay"; -}; - -&tmu0 { - status = "okay"; -}; - -&pfc { - scif0_pins: serial0 { - renesas,groups = "scif0_data_a", "scif0_ctrl"; - renesas,function = "scif0"; - }; - - mmc_pins: mmc { - renesas,groups = "mmc_data8", "mmc_ctrl"; - renesas,function = "mmc"; - }; - - sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", - "sdhi0_cd"; - renesas,function = "sdhi0"; - }; - - hspi0_pins: hspi0 { - renesas,groups = "hspi0_a"; - renesas,function = "hspi0"; - }; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&fixedregulator3v3>; - bus-width = <4>; - status = "okay"; - wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; -}; - -&hspi0 { - pinctrl-0 = <&hspi0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,s25fl008k", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - m25p,fast-read; - - partition@0 { - label = "data(spi)"; - reg = <0x00000000 0x00100000>; - }; - }; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 4b1fa9f42ad5..4f8e07811746 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -239,7 +239,7 @@ #sound-dai-cells = <1>; compatible = "renesas,rcar_sound-r8a7778", "renesas,rcar_sound-gen1"; reg = <0xffd90000 0x1000>, /* SRU */ - <0xffd91000 0x1240>, /* SSI */ + <0xffd91000 0x240>, /* SSI */ <0xfffe0000 0x24>; /* ADG */ clocks = <&mstp3_clks R8A7778_CLK_SSI8>, <&mstp3_clks R8A7778_CLK_SSI7>, diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 20afea6f06ef..fe396c8d58db 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -19,12 +19,12 @@ compatible = "renesas,marzen", "renesas,r8a7779"; aliases { - serial2 = &scif2; - serial4 = &scif4; + serial0 = &scif2; + serial1 = &scif4; }; chosen { - bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on"; + bootargs = "ignore_loglevel root=/dev/nfs ip=on"; stdout-path = &scif2; }; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 37dec5269491..c553abd711ee 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -174,6 +174,13 @@ 1800000 0>; }; + audio_clock: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + clock-output-names = "audio_clock"; + }; + rsnd_ak4643: sound { compatible = "simple-audio-card"; @@ -187,7 +194,7 @@ sndcodec: simple-audio-card,codec { sound-dai = <&ak4643>; - system-clock-frequency = <11289600>; + clocks = <&audio_clock>; }; }; @@ -335,6 +342,11 @@ renesas,function = "msiof1"; }; + iic0_pins: iic0 { + renesas,groups = "iic0"; + renesas,function = "iic0"; + }; + iic1_pins: iic1 { renesas,groups = "iic1"; renesas,function = "iic1"; @@ -510,6 +522,8 @@ &iic0 { status = "okay"; + pinctrl-0 = <&iic0_pins>; + pinctrl-names = "default"; }; &iic1 { diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 4624d0f2a754..e07ae5d45e19 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1599,7 +1599,7 @@ reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x1280>, /* SSI */ + <0 0xec541000 0 0x280>, /* SSI */ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index dc158845afdc..fc44ea361a4b 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -242,6 +242,13 @@ 1800000 0>; }; + audio_clock: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + clock-output-names = "audio_clock"; + }; + rsnd_ak4643: sound { compatible = "simple-audio-card"; @@ -255,7 +262,7 @@ sndcodec: simple-audio-card,codec { sound-dai = <&ak4643>; - system-clock-frequency = <11289600>; + clocks = <&audio_clock>; }; }; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts new file mode 100644 index 000000000000..fe0f12fc02a1 --- /dev/null +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -0,0 +1,282 @@ +/* + * Device Tree Source for the Porter board + * + * Copyright (C) 2015 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7791.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Porter"; + compatible = "renesas,porter", "renesas,r8a7791"; + + aliases { + serial0 = &scif0; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = &scif0; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + memory@200000000 { + device_type = "memory"; + reg = <2 0x00000000 0 0x40000000>; + }; + + vcc_sdhi0: regulator@0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccq_sdhi0: regulator@1 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi2: regulator@2 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccq_sdhi2: regulator@3 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI2 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + scif0_pins: serial0 { + renesas,groups = "scif0_data_d"; + renesas,function = "scif0"; + }; + + ether_pins: ether { + renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; + renesas,function = "eth"; + }; + + phy1_pins: phy1 { + renesas,groups = "intc_irq0"; + renesas,function = "intc"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; + renesas,function = "sdhi0"; + }; + + sdhi2_pins: sd2 { + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; + renesas,function = "sdhi2"; + }; + + qspi_pins: spi0 { + renesas,groups = "qspi_ctrl", "qspi_data4"; + renesas,function = "qspi"; + }; + + i2c2_pins: i2c2 { + renesas,groups = "i2c2"; + renesas,function = "i2c2"; + }; + + usb0_pins: usb0 { + renesas,groups = "usb0"; + renesas,function = "usb0"; + }; + + usb1_pins: usb1 { + renesas,groups = "usb1"; + renesas,function = "usb1"; + }; + + vin0_pins: vin0 { + renesas,groups = "vin0_data8", "vin0_clk"; + renesas,function = "vin0"; + }; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "ok"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc0>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi2>; + vqmmc-supply = <&vccq_sdhi2>; + cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + + partition@0 { + label = "loader_prg"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "user_prg"; + reg = <0x00040000 0x00400000>; + read-only; + }; + partition@440000 { + label = "flash_fs"; + reg = <0x00440000 0x03bc0000>; + }; + }; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin0>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin0ep>; + }; + }; + }; +}; + +&sata0 { + status = "okay"; +}; + +/* composite video input */ +&vin0 { + status = "ok"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; + +&pci0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pci1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&pcie_bus_clk { + status = "okay"; +}; + +&pciec { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 1666c8a6b143..328f48bd15e7 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1649,7 +1649,7 @@ reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x1280>, /* SSI */ + <0 0xec541000 0 0x280>, /* SSI */ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index d4dd5a30ccdf..48ff3e2958ae 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -61,10 +61,35 @@ renesas,function = "intc"; }; + i2c1_pins: i2c1 { + renesas,groups = "i2c1"; + renesas,function = "i2c1"; + }; + mmcif0_pins: mmcif0 { renesas,groups = "mmc_data8", "mmc_ctrl"; renesas,function = "mmc"; }; + + qspi_pins: spi0 { + renesas,groups = "qspi_ctrl", "qspi_data4"; + renesas,function = "qspi"; + }; + + vin0_pins: vin0 { + renesas,groups = "vin0_data8", "vin0_clk"; + renesas,function = "vin0"; + }; + + usb0_pins: usb0 { + renesas,groups = "usb0"; + renesas,function = "usb0"; + }; + + usb1_pins: usb1 { + renesas,groups = "usb1"; + renesas,function = "usb1"; + }; }; &scif2 { @@ -90,6 +115,27 @@ }; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin0>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin0ep>; + }; + }; + }; +}; + &mmcif0 { pinctrl-0 = <&mmcif0_pins>; pinctrl-names = "default"; @@ -100,3 +146,71 @@ non-removable; status = "okay"; }; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + spi-cpol; + spi-cpha; + m25p,fast-read; + + partition@0 { + label = "loader"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "user"; + reg = <0x00040000 0x00400000>; + read-only; + }; + partition@440000 { + label = "flash"; + reg = <0x00440000 0x03bc0000>; + }; + }; +}; + +/* composite video input */ +&vin0 { + status = "okay"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; + +&pci0 { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 97c8e9ace5eb..a9977d6ee81a 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -19,6 +19,18 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + spi0 = &qspi; + vin0 = &vin0; + vin1 = &vin1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -50,6 +62,97 @@ interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO0>; + power-domains = <&cpg_clocks>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO1>; + power-domains = <&cpg_clocks>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO2>; + power-domains = <&cpg_clocks>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO3>; + power-domains = <&cpg_clocks>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO4>; + power-domains = <&cpg_clocks>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 28>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO5>; + power-domains = <&cpg_clocks>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO6>; + power-domains = <&cpg_clocks>; + }; + cmt0: timer@ffca0000 { compatible = "renesas,cmt-48-gen2"; reg = <0 0xffca0000 0 0x1004>; @@ -407,6 +510,73 @@ status = "disabled"; }; + /* The memory map in the User's Manual maps the cores to bus numbers */ + i2c0: i2c@e6508000 { + compatible = "renesas,i2c-r8a7794"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_I2C0>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e6518000 { + compatible = "renesas,i2c-r8a7794"; + reg = <0 0xe6518000 0 0x40>; + interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_I2C1>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e6530000 { + compatible = "renesas,i2c-r8a7794"; + reg = <0 0xe6530000 0 0x40>; + interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_I2C2>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e6540000 { + compatible = "renesas,i2c-r8a7794"; + reg = <0 0xe6540000 0 0x40>; + interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_I2C3>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e6520000 { + compatible = "renesas,i2c-r8a7794"; + reg = <0 0xe6520000 0 0x40>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_I2C4>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@e6528000 { + compatible = "renesas,i2c-r8a7794"; + reg = <0 0xe6528000 0 0x40>; + interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_I2C5>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + mmcif0: mmc@ee200000 { compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; @@ -446,6 +616,140 @@ status = "disabled"; }; + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7794", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7794"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7794_CLK_VIN0>; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7794"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7794_CLK_VIN1>; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7794"; + device_type = "pci"; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_EHCI>; + power-domains = <&cpg_clocks>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@0,1 { + reg = <0x800 0 0 0 0>; + device_type = "pci"; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@0,2 { + reg = <0x1000 0 0 0 0>; + device_type = "pci"; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; + + pci1: pci@ee0d0000 { + compatible = "renesas,pci-r8a7794"; + device_type = "pci"; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_EHCI>; + power-domains = <&cpg_clocks>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@0,1 { + reg = <0x800 0 0 0 0>; + device_type = "pci"; + phys = <&usb2 0>; + phy-names = "usb"; + }; + + usb@0,2 { + reg = <0x1000 0 0 0 0>; + device_type = "pci"; + phys = <&usb2 0>; + phy-names = "usb"; + }; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7794"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSUSB>; + power-domains = <&cpg_clocks>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7794"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mstp7_clks R8A7794_CLK_HSUSB>; + clock-names = "usbhs"; + power-domains = <&cpg_clocks>; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -749,16 +1053,22 @@ mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>, - <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; + clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>, + <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; - clock-indices = < - R8A7794_CLK_QSPI_MOD R8A7794_CLK_I2C5 R8A7794_CLK_I2C4 - R8A7794_CLK_I2C3 R8A7794_CLK_I2C2 R8A7794_CLK_I2C1 - R8A7794_CLK_I2C0 - >; + clock-indices = <R8A7794_CLK_GPIO6 R8A7794_CLK_GPIO5 + R8A7794_CLK_GPIO4 R8A7794_CLK_GPIO3 + R8A7794_CLK_GPIO2 R8A7794_CLK_GPIO1 + R8A7794_CLK_GPIO0 R8A7794_CLK_QSPI_MOD + R8A7794_CLK_I2C5 R8A7794_CLK_I2C4 + R8A7794_CLK_I2C3 R8A7794_CLK_I2C2 + R8A7794_CLK_I2C1 R8A7794_CLK_I2C0>; clock-output-names = - "qspi_mod", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; + "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", + "gpio1", "gpio0", "qspi_mod", + "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; }; mstp11_clks: mstp11_clks@e615099c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi new file mode 100644 index 000000000000..a07ebf8f6938 --- /dev/null +++ b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi @@ -0,0 +1,41 @@ +/* + * Common file for the AA121TD01 panel connected to Renesas R-Car boards + * + * Copyright (C) 2015 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + panel { + compatible = "mitsubishi,aa121td01", "panel-dpi"; + + width-mm = <261>; + height-mm = <163>; + + panel-timing { + /* 1280x800 @60Hz */ + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hsync-len = <70>; + hfront-porch = <20>; + hback-porch = <70>; + vsync-len = <5>; + vfront-porch = <3>; + vback-porch = <15>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_connector>; + }; + }; + }; +}; + +&lvds_connector { + remote-endpoint = <&panel_in>; +}; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index c0273755431a..38c91a839795 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -186,6 +186,8 @@ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; disable-wp; }; diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index bae965c123c1..7cdc308bfac5 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -178,6 +178,14 @@ }; }; +&mmc0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; + vmmc-supply = <&vcc_sd0>; +}; + &pinctrl { lan8720a { phy_int: phy-int { diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index e36383c701dc..341c1f87936a 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -330,6 +330,8 @@ pinctrl-names = "default"; pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd>; + cap-mmc-highspeed; + cap-sd-highspeed; status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index d2180e5d2b05..66fa87d1e2c2 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -90,6 +90,21 @@ }; }; + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + + simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */ + cpu { sound-dai = <&spdif>; }; + codec { sound-dai = <&spdif_out>; }; + }; + }; + + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + ir_recv: gpio-ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio0 10 1>; @@ -289,6 +304,8 @@ vmmc-supply = <&vcc_sd0>; bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; disable-wp; }; @@ -343,6 +360,10 @@ }; }; +&spdif { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 316304272118..6399942f1840 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -121,6 +121,20 @@ status = "disabled"; }; + spdif: sound@1011e000 { + compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; + reg = <0x1011e000 0x2000>; + #sound-dai-cells = <0>; + clock-names = "hclk", "mclk"; + clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>; + dmas = <&dmac1_s 8>; + dma-names = "tx"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx>; + status = "disabled"; + }; + cru: clock-controller@20000000 { compatible = "rockchip,rk3188-cru"; reg = <0x20000000 0x1000>; @@ -484,6 +498,12 @@ <RK_GPIO1 21 RK_FUNC_1 &pcfg_pull_none>; }; }; + + spdif { + spdif_tx: spdif-tx { + rockchip,pins = <RK_GPIO1 14 RK_FUNC_1 &pcfg_pull_none>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 20fa0ef0b96b..4e3fd9aefe34 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -48,6 +48,14 @@ reg = <0 0x80000000>; }; + dovdd_1v8: dovdd-1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "dovdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc28_dvp>; + }; + ext_gmac: external-gmac-clock { compatible = "fixed-clock"; #clock-cells = <0>; @@ -55,6 +63,22 @@ clock-output-names = "ext_gmac"; }; + io_domains: io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + rockchip,grf = <&grf>; + + audio-supply = <&vcca_33>; + bb-supply = <&vcc_io>; + dvp-supply = <&dovdd_1v8>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vcc_lan>; + gpio30-supply = <&vcc_io>; + gpio1830-supply = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vccio_wl>; + }; + ir: ir-receiver { compatible = "gpio-ir-receiver"; pinctrl-names = "default"; @@ -96,7 +120,7 @@ }; }; - vcc_sys: vsys-regulator { + vbat_wl: vcc_sys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-min-microvolt = <5000000>; @@ -160,6 +184,23 @@ regulator-always-on; vin-supply = <&vcc_5v>; }; + + /* + * A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled + * by the dvp_pwr pin. + */ + vcc28_dvp: vcc28-dvp-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&dvp_pwr>; + regulator-name = "vcc28_dvp"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + vin-supply = <&vcc_io>; + }; }; &cpu0 { @@ -325,7 +366,7 @@ regulator-always-on; }; - vcc_18: REG11 { + vccio_wl: vcc_18: REG11 { regulator-name = "vcc_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -373,6 +414,12 @@ }; }; + dvp { + dvp_pwr: dvp-pwr { + rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + gmac { phy_int: phy-int { rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; @@ -445,7 +492,8 @@ num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>; - vmmc-supply = <&vcc_18>; + vmmc-supply = <&vbat_wl>; + vqmmc-supply = <&vccio_wl>; status = "okay"; }; @@ -459,6 +507,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index f82b956ebf17..65c475642d5a 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -79,6 +79,22 @@ }; }; + io_domains: io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + rockchip,grf = <&grf>; + + audio-supply = <&vcca_33>; + bb-supply = <&vcc_io>; + dvp-supply = <&vcc18_dvp>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vcc_lan>; + gpio30-supply = <&vcc_io>; + gpio1830-supply = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vccio_wl>; + }; + ir: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; @@ -86,6 +102,26 @@ pinctrl-0 = <&ir_int>; }; + vcc_flash: flash-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_flash"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_io>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + vcc_sys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -94,6 +130,31 @@ regulator-always-on; regulator-boot-on; }; + + /* + * A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled + * by the dvp_pwr pin. + */ + vcc18_dvp: vcc18-dvp-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc18-dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc28_dvp>; + }; + + vcc28_dvp: vcc28-dvp-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&dvp_pwr>; + regulator-name = "vcc28_dvp"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + vin-supply = <&vcc_io>; + }; }; &cpu0 { @@ -109,6 +170,8 @@ num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_flash>; status = "okay"; }; @@ -121,6 +184,8 @@ num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; status = "okay"; }; @@ -297,22 +362,22 @@ }; }; - vcca_codec: LDO_REG8 { + vcca_33: LDO_REG8 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcca_codec"; + regulator-name = "vcca_33"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; }; }; - vcc_wl: SWITCH_REG1 { + vccio_wl: SWITCH_REG1 { regulator-always-on; regulator-boot-on; - regulator-name = "vcc_wl"; + regulator-name = "vccio_wl"; regulator-state-mem { regulator-on-in-suspend; }; @@ -388,6 +453,12 @@ }; }; + dvp { + dvp_pwr: dvp-pwr { + rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + ir { ir_int: ir-int { rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>; @@ -405,6 +476,12 @@ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + + sdmmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &tsadc { diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi new file mode 100644 index 000000000000..1813b7c36556 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -0,0 +1,277 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/pwm/pwm.h> +#include "rk3288.dtsi" + +/ { + memory { + reg = <0x0 0x80000000>; + device_type = "memory"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + mmc-pwrseq = <&emmc_pwrseq>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + vmmc-supply = <&vcc_io>; + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + phy-mode = "rgmii"; + phy-supply = <&vccio_pmu>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins &phy_rst>; + snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; + rx_delay = <0x10>; + tx_delay = <0x30>; +}; + +&i2c0 { + status = "okay"; + + act8846: act8846@5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + inl1-supply = <&vcc_io>; + inl2-supply = <&vcc_sys>; + inl3-supply = <&vcc_20>; + vp1-supply = <&vcc_sys>; + vp2-supply = <&vcc_sys>; + vp3-supply = <&vcc_sys>; + vp4-supply = <&vcc_sys>; + + regulators { + vcc_ddr: REG1 { + regulator-name = "VCC_DDR"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_io: REG2 { + regulator-name = "VCC_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_log: REG3 { + regulator-name = "VDD_LOG"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcc_20: REG4 { + regulator-name = "VCC_20"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + vccio_sd: REG5 { + regulator-name = "VCCIO_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd10_lcd: REG6 { + regulator-name = "VDD10_LCD"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcca_codec: REG7 { + regulator-name = "VCCA_CODEC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcca_tp: REG8 { + regulator-name = "VCCA_TP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccio_pmu: REG9 { + regulator-name = "VCCIO_PMU"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_10: REG10 { + regulator-name = "VDD_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcc_18: REG11 { + regulator-name = "VCC_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc18_lcd: REG12 { + regulator-name = "VCC18_LCD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; + + vdd_cpu: syr827@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + regulator-enable-ramp-delay = <300>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <8000>; + vin-supply = <&vcc_sys>; + }; + + vdd_gpu: syr828@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-enable-ramp-delay = <300>; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_gpu"; + regulator-ramp-delay = <8000>; + vin-supply = <&vcc_sys>; + }; +}; + +&pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + emmc { + emmc_reset: emmc-reset { + rockchip,pins = <3 9 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gmac { + phy_rst: phy-rst { + rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts new file mode 100644 index 000000000000..8af35c867a80 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -0,0 +1,167 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3288-rock2-som.dtsi" + +/ { + model = "Radxa Rock 2 Square"; + compatible = "radxa,rock2-square", "rockchip,rk3288"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */ + cpu { sound-dai = <&spdif>; }; + codec { sound-dai = <&spdif_out>; }; + }; + }; + + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + vcc_usb_host: vcc-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + /* Always on as the rockchip usb phy doesn't have a vbus-supply + * property + */ + regulator-always-on; + regulator-name = "vcc_host"; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; /* wp not hooked up */ + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&gmac { + status = "ok"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + status = "okay"; +}; + +&i2c0 { + hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + + }; +}; + +&i2c5 { + status = "okay"; +}; + +&pinctrl { + pmic { + pmic_int: pmic-int { + rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&spdif { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts new file mode 100644 index 000000000000..c2f52cfb4d06 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -0,0 +1,176 @@ +/* + * Google Veyron Jaq Rev 1+ board device tree source + * + * Copyright 2015 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "rk3288-veyron-chromebook.dtsi" +#include "cros-ec-sbs.dtsi" + +/ { + model = "Google Jaq"; + compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4", + "google,veyron-jaq-rev3", "google,veyron-jaq-rev2", + "google,veyron-jaq-rev1", "google,veyron-jaq", + "google,veyron", "rockchip,rk3288"; + + panel_regulator: panel-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_enable_h>; + regulator-name = "panel_regulator"; + vin-supply = <&vcc33_sys>; + }; + + vcc18_lcd: vcc18-lcd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&avdd_1v8_disp_en>; + regulator-name = "vcc18_lcd"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc18_wl>; + }; + + backlight_regulator: backlight-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_pwr_en>; + regulator-name = "backlight_regulator"; + vin-supply = <&vcc33_sys>; + startup-delay-us = <15000>; + }; +}; + +&rk808 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; + dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>, + <&gpio7 15 GPIO_ACTIVE_HIGH>; + + regulators { + mic_vcc: LDO_REG2 { + regulator-name = "mic_vcc"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; +}; + +&sdmmc { + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio + &sdmmc_bus4>; +}; + +&vcc_5v { + enable-active-high; + gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&drv_5v>; +}; + +&vcc50_hdmi { + enable-active-high; + gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc50_hdmi_en>; +}; + +&pinctrl { + backlight { + bl_pwr_en: bl_pwr_en { + rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buck-5v { + drv_5v: drv-5v { + rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + edp { + edp_hpd: edp_hpd { + rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>; + }; + }; + + hdmi { + vcc50_hdmi_en: vcc50-hdmi-en { + rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lcd { + lcd_enable_h: lcd-en { + rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + avdd_1v8_disp_en: avdd-1v8-disp-en { + rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + dvs_1: dvs-1 { + rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 860cea0a7613..5e61f07724d4 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -550,18 +550,6 @@ }; }; - /* - * On Marvell-based hardware this is a no-connect. Make sure we enable - * the pullup so that the line doesn't float. The pullup shouldn't - * hurt on Broadcom-based hardware since the other side is actively - * driving this signal. As proof: we've already got a pullup on RX. - */ - uart0 { - uart0_cts: uart0-cts { - rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>; - }; - }; - write-protect { fw_wp_ap: fw-wp-ap { rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 4e7c6b7392af..6a79c9c526b8 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -44,6 +44,7 @@ #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/clock/rk3288-cru.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/power/rk3288-power.h> #include "skeleton.dtsi" / { @@ -617,8 +618,98 @@ }; pmu: power-management@ff730000 { - compatible = "rockchip,rk3288-pmu", "syscon"; + compatible = "rockchip,rk3288-pmu", "syscon", "simple-mfd"; reg = <0xff730000 0x100>; + + power: power-controller { + compatible = "rockchip,rk3288-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* + * Note: Although SCLK_* are the working clocks + * of device without including on the NOC, needed for + * synchronous reset. + * + * The clocks on the which NOC: + * ACLK_IEP/ACLK_VIP/ACLK_VOP0 are on ACLK_VIO0_NIU. + * ACLK_ISP/ACLK_VOP1 are on ACLK_VIO1_NIU. + * ACLK_RGA is on ACLK_RGA_NIU. + * The others (HCLK_*,PLCK_*) are on HCLK_VIO_NIU. + * + * Which clock are device clocks: + * clocks devices + * *_IEP IEP:Image Enhancement Processor + * *_ISP ISP:Image Signal Processing + * *_VIP VIP:Video Input Processor + * *_VOP* VOP:Visual Output Processor + * *_RGA RGA + * *_EDP* EDP + * *_LVDS_* LVDS + * *_HDMI HDMI + * *_MIPI_* MIPI + */ + pd_vio { + reg = <RK3288_PD_VIO>; + clocks = <&cru ACLK_IEP>, + <&cru ACLK_ISP>, + <&cru ACLK_RGA>, + <&cru ACLK_VIP>, + <&cru ACLK_VOP0>, + <&cru ACLK_VOP1>, + <&cru DCLK_VOP0>, + <&cru DCLK_VOP1>, + <&cru HCLK_IEP>, + <&cru HCLK_ISP>, + <&cru HCLK_RGA>, + <&cru HCLK_VIP>, + <&cru HCLK_VOP0>, + <&cru HCLK_VOP1>, + <&cru PCLK_EDP_CTRL>, + <&cru PCLK_HDMI_CTRL>, + <&cru PCLK_LVDS_PHY>, + <&cru PCLK_MIPI_CSI>, + <&cru PCLK_MIPI_DSI0>, + <&cru PCLK_MIPI_DSI1>, + <&cru SCLK_EDP_24M>, + <&cru SCLK_EDP>, + <&cru SCLK_ISP_JPE>, + <&cru SCLK_ISP>, + <&cru SCLK_RGA>; + }; + + /* + * Note: The following 3 are HEVC(H.265) clocks, + * and on the ACLK_HEVC_NIU (NOC). + */ + pd_hevc { + reg = <RK3288_PD_HEVC>; + clocks = <&cru ACLK_HEVC>, + <&cru SCLK_HEVC_CABAC>, + <&cru SCLK_HEVC_CORE>; + }; + + /* + * Note: ACLK_VCODEC/HCLK_VCODEC are VCODEC + * (video endecoder & decoder) clocks that on the + * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC). + */ + pd_video { + reg = <RK3288_PD_VIDEO>; + clocks = <&cru ACLK_VCODEC>, + <&cru HCLK_VCODEC>; + }; + + /* + * Note: ACLK_GPU is the GPU clock, + * and on the ACLK_GPU_NIU (NOC). + */ + pd_gpu { + reg = <RK3288_PD_GPU>; + clocks = <&cru ACLK_GPU>; + }; + }; }; sgrf: syscon@ff740000 { @@ -657,6 +748,21 @@ status = "disabled"; }; + spdif: sound@ff88b0000 { + compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif"; + reg = <0xff8b0000 0x10000>; + #sound-dai-cells = <0>; + clock-names = "hclk", "mclk"; + clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>; + dmas = <&dmac_bus_s 3>; + dma-names = "tx"; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx>; + rockchip,grf = <&grf>; + status = "disabled"; + }; + i2s: i2s@ff890000 { compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; reg = <0xff890000 0x10000>; @@ -678,6 +784,7 @@ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3288_PD_VIO>; resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>; reset-names = "axi", "ahb", "dclk"; iommus = <&vopb_mmu>; @@ -699,6 +806,7 @@ reg = <0xff930300 0x100>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vopb_mmu"; + power-domains = <&power RK3288_PD_VIO>; #iommu-cells = <0>; status = "disabled"; }; @@ -709,6 +817,7 @@ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3288_PD_VIO>; resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>; reset-names = "axi", "ahb", "dclk"; iommus = <&vopl_mmu>; @@ -730,6 +839,7 @@ reg = <0xff940300 0x100>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vopl_mmu"; + power-domains = <&power RK3288_PD_VIO>; #iommu-cells = <0>; status = "disabled"; }; @@ -742,6 +852,7 @@ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; clock-names = "iahb", "isfr"; + power-domains = <&power RK3288_PD_VIO>; status = "disabled"; ports { @@ -927,6 +1038,13 @@ #interrupt-cells = <2>; }; + hdmi { + hdmi_ddc: hdmi-ddc { + rockchip,pins = <7 19 RK_FUNC_2 &pcfg_pull_none>, + <7 20 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + pcfg_pull_up: pcfg-pull-up { bias-pull-up; }; @@ -1215,7 +1333,7 @@ }; uart0_cts: uart0-cts { - rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>; }; uart0_rts: uart0-rts { @@ -1230,7 +1348,7 @@ }; uart1_cts: uart1-cts { - rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_up>; }; uart1_rts: uart1-rts { @@ -1253,7 +1371,7 @@ }; uart3_cts: uart3-cts { - rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_up>; }; uart3_rts: uart3-rts { @@ -1268,7 +1386,7 @@ }; uart4_cts: uart4-cts { - rockchip,pins = <5 14 3 &pcfg_pull_none>; + rockchip,pins = <5 14 3 &pcfg_pull_up>; }; uart4_rts: uart4-rts { @@ -1338,5 +1456,11 @@ <4 3 3 &pcfg_pull_none>; }; }; + + spdif { + spdif_tx: spdif-tx { + rockchip,pins = <RK_GPIO6 11 RK_FUNC_1 &pcfg_pull_none>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index a5184ff56933..80f007550324 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -25,7 +25,7 @@ #size-cells = <0>; cpu { - compatible = "arm,arm926ejs"; + compatible = "arm,arm926ej-s"; }; }; diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts index f00cea7aca2f..aa64faa72970 100644 --- a/arch/arm/boot/dts/s5pv210-aquila.dts +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -46,7 +46,7 @@ regulator-name = "V_TF_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpios = <&mp05 4 0>; + gpio = <&mp05 4 0>; enable-active-high; }; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index a3d4643b202e..3b76eeeb8410 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -47,7 +47,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; reg = <0>; - gpios = <&mp05 4 0>; + gpio = <&mp05 4 0>; enable-active-high; }; @@ -73,7 +73,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; reg = <3>; - gpios = <&gpj1 3 0>; + gpio = <&gpj1 3 0>; enable-active-high; }; }; diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/sama5d2-pinfunc.h new file mode 100644 index 000000000000..1afe24629d1f --- /dev/null +++ b/arch/arm/boot/dts/sama5d2-pinfunc.h @@ -0,0 +1,880 @@ +#define PINMUX_PIN(no, func, ioset) \ +(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20)) + +#define PIN_PA0 0 +#define PIN_PA0__GPIO PINMUX_PIN(PIN_PA0, 0, 0) +#define PIN_PA0__SDMMC0_CK PINMUX_PIN(PIN_PA0, 1, 1) +#define PIN_PA0__QSPI0_SCK PINMUX_PIN(PIN_PA0, 2, 1) +#define PIN_PA0__D0 PINMUX_PIN(PIN_PA0, 6, 2) +#define PIN_PA1 1 +#define PIN_PA1__GPIO PINMUX_PIN(PIN_PA1, 0, 0) +#define PIN_PA1__SDMMC0_CMD PINMUX_PIN(PIN_PA1, 1, 1) +#define PIN_PA1__QSPI0_CS PINMUX_PIN(PIN_PA1, 2, 1) +#define PIN_PA1__D1 PINMUX_PIN(PIN_PA1, 6, 2) +#define PIN_PA2 2 +#define PIN_PA2__GPIO PINMUX_PIN(PIN_PA2, 0, 0) +#define PIN_PA2__SDMMC0_DAT0 PINMUX_PIN(PIN_PA2, 1, 1) +#define PIN_PA2__QSPI0_IO0 PINMUX_PIN(PIN_PA2, 2, 1) +#define PIN_PA2__D2 PINMUX_PIN(PIN_PA2, 6, 2) +#define PIN_PA3 3 +#define PIN_PA3__GPIO PINMUX_PIN(PIN_PA3, 0, 0) +#define PIN_PA3__SDMMC0_DAT1 PINMUX_PIN(PIN_PA3, 1, 1) +#define PIN_PA3__QSPI0_IO1 PINMUX_PIN(PIN_PA3, 2, 1) +#define PIN_PA3__D3 PINMUX_PIN(PIN_PA3, 6, 2) +#define PIN_PA4 4 +#define PIN_PA4__GPIO PINMUX_PIN(PIN_PA4, 0, 0) +#define PIN_PA4__SDMMC0_DAT2 PINMUX_PIN(PIN_PA4, 1, 1) +#define PIN_PA4__QSPI0_IO2 PINMUX_PIN(PIN_PA4, 2, 1) +#define PIN_PA4__D4 PINMUX_PIN(PIN_PA4, 6, 2) +#define PIN_PA5 5 +#define PIN_PA5__GPIO PINMUX_PIN(PIN_PA5, 0, 0) +#define PIN_PA5__SDMMC0_DAT3 PINMUX_PIN(PIN_PA5, 1, 1) +#define PIN_PA5__QSPI0_IO3 PINMUX_PIN(PIN_PA5, 2, 1) +#define PIN_PA5__D5 PINMUX_PIN(PIN_PA5, 6, 2) +#define PIN_PA6 6 +#define PIN_PA6__GPIO PINMUX_PIN(PIN_PA6, 0, 0) +#define PIN_PA6__SDMMC0_DAT4 PINMUX_PIN(PIN_PA6, 1, 1) +#define PIN_PA6__QSPI1_SCK PINMUX_PIN(PIN_PA6, 2, 1) +#define PIN_PA6__TIOA5 PINMUX_PIN(PIN_PA6, 4, 1) +#define PIN_PA6__FLEXCOM2_IO0 PINMUX_PIN(PIN_PA6, 5, 1) +#define PIN_PA6__D6 PINMUX_PIN(PIN_PA6, 6, 2) +#define PIN_PA7 7 +#define PIN_PA7__GPIO PINMUX_PIN(PIN_PA7, 0, 0) +#define PIN_PA7__SDMMC0_DAT5 PINMUX_PIN(PIN_PA7, 1, 1) +#define PIN_PA7__QSPI1_IO0 PINMUX_PIN(PIN_PA7, 2, 1) +#define PIN_PA7__TIOB5 PINMUX_PIN(PIN_PA7, 4, 1) +#define PIN_PA7__FLEXCOM2_IO1 PINMUX_PIN(PIN_PA7, 5, 1) +#define PIN_PA7__D7 PINMUX_PIN(PIN_PA7, 6, 2) +#define PIN_PA8 8 +#define PIN_PA8__GPIO PINMUX_PIN(PIN_PA8, 0, 0) +#define PIN_PA8__SDMMC0_DAT6 PINMUX_PIN(PIN_PA8, 1, 1) +#define PIN_PA8__QSPI1_IO1 PINMUX_PIN(PIN_PA8, 2, 1) +#define PIN_PA8__TCLK5 PINMUX_PIN(PIN_PA8, 4, 1) +#define PIN_PA8__FLEXCOM2_IO2 PINMUX_PIN(PIN_PA8, 5, 1) +#define PIN_PA8__NWE_NANDWE PINMUX_PIN(PIN_PA8, 6, 2) +#define PIN_PA9 9 +#define PIN_PA9__GPIO PINMUX_PIN(PIN_PA9, 0, 0) +#define PIN_PA9__SDMMC0_DAT7 PINMUX_PIN(PIN_PA9, 1, 1) +#define PIN_PA9__QSPI1_IO2 PINMUX_PIN(PIN_PA9, 2, 1) +#define PIN_PA9__TIOA4 PINMUX_PIN(PIN_PA9, 4, 1) +#define PIN_PA9__FLEXCOM2_IO3 PINMUX_PIN(PIN_PA9, 5, 1) +#define PIN_PA9__NCS3 PINMUX_PIN(PIN_PA9, 6, 2) +#define PIN_PA10 10 +#define PIN_PA10__GPIO PINMUX_PIN(PIN_PA10, 0, 0) +#define PIN_PA10__SDMMC0_RSTN PINMUX_PIN(PIN_PA10, 1, 1) +#define PIN_PA10__QSPI1_IO3 PINMUX_PIN(PIN_PA10, 2, 1) +#define PIN_PA10__TIOB4 PINMUX_PIN(PIN_PA10, 4, 1) +#define PIN_PA10__FLEXCOM2_IO4 PINMUX_PIN(PIN_PA10, 5, 1) +#define PIN_PA10__A21_NANDALE PINMUX_PIN(PIN_PA10, 6, 2) +#define PIN_PA11 11 +#define PIN_PA11__GPIO PINMUX_PIN(PIN_PA11, 0, 0) +#define PIN_PA11__SDMMC0_VDDSEL PINMUX_PIN(PIN_PA11, 1, 1) +#define PIN_PA11__QSPI1_CS PINMUX_PIN(PIN_PA11, 2, 1) +#define PIN_PA11__TCLK4 PINMUX_PIN(PIN_PA11, 4, 1) +#define PIN_PA11__A22_NANDCLE PINMUX_PIN(PIN_PA11, 6, 2) +#define PIN_PA12 12 +#define PIN_PA12__GPIO PINMUX_PIN(PIN_PA12, 0, 0) +#define PIN_PA12__SDMMC0_WP PINMUX_PIN(PIN_PA12, 1, 1) +#define PIN_PA12__IRQ PINMUX_PIN(PIN_PA12, 2, 1) +#define PIN_PA12__NRD_NANDOE PINMUX_PIN(PIN_PA12, 6, 2) +#define PIN_PA13 13 +#define PIN_PA13__GPIO PINMUX_PIN(PIN_PA13, 0, 0) +#define PIN_PA13__SDMMC0_CD PINMUX_PIN(PIN_PA13, 1, 1) +#define PIN_PA13__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA13, 5, 1) +#define PIN_PA13__D8 PINMUX_PIN(PIN_PA13, 6, 2) +#define PIN_PA14 14 +#define PIN_PA14__GPIO PINMUX_PIN(PIN_PA14, 0, 0) +#define PIN_PA14__SPI0_SPCK PINMUX_PIN(PIN_PA14, 1, 1) +#define PIN_PA14__TK1 PINMUX_PIN(PIN_PA14, 2, 1) +#define PIN_PA14__QSPI0_SCK PINMUX_PIN(PIN_PA14, 3, 2) +#define PIN_PA14__I2SC1_MCK PINMUX_PIN(PIN_PA14, 4, 2) +#define PIN_PA14__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA14, 5, 1) +#define PIN_PA14__D9 PINMUX_PIN(PIN_PA14, 6, 2) +#define PIN_PA15 14 +#define PIN_PA15__GPIO PINMUX_PIN(PIN_PA15, 0, 0) +#define PIN_PA15__SPI0_MOSI PINMUX_PIN(PIN_PA15, 1, 1) +#define PIN_PA15__TF1 PINMUX_PIN(PIN_PA15, 2, 1) +#define PIN_PA15__QSPI0_CS PINMUX_PIN(PIN_PA15, 3, 2) +#define PIN_PA15__I2SC1_CK PINMUX_PIN(PIN_PA15, 4, 2) +#define PIN_PA15__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA15, 5, 1) +#define PIN_PA15__D10 PINMUX_PIN(PIN_PA15, 6, 2) +#define PIN_PA16 16 +#define PIN_PA16__GPIO PINMUX_PIN(PIN_PA16, 0, 0) +#define PIN_PA16__SPI0_MISO PINMUX_PIN(PIN_PA16, 1, 1) +#define PIN_PA16__TD1 PINMUX_PIN(PIN_PA16, 2, 1) +#define PIN_PA16__QSPI0_IO0 PINMUX_PIN(PIN_PA16, 3, 2) +#define PIN_PA16__I2SC1_WS PINMUX_PIN(PIN_PA16, 4, 2) +#define PIN_PA16__FLEXCOM3_IO3 PINMUX_PIN(PIN_PA16, 5, 1) +#define PIN_PA16__D11 PINMUX_PIN(PIN_PA16, 6, 2) +#define PIN_PA17 17 +#define PIN_PA17__GPIO PINMUX_PIN(PIN_PA17, 0, 0) +#define PIN_PA17__SPI0_NPCS0 PINMUX_PIN(PIN_PA17, 1, 1) +#define PIN_PA17__RD1 PINMUX_PIN(PIN_PA17, 2, 1) +#define PIN_PA17__QSPI0_IO1 PINMUX_PIN(PIN_PA17, 3, 2) +#define PIN_PA17__I2SC1_DI0 PINMUX_PIN(PIN_PA17, 4, 2) +#define PIN_PA17__FLEXCOM3_IO4 PINMUX_PIN(PIN_PA17, 5, 1) +#define PIN_PA17__D12 PINMUX_PIN(PIN_PA17, 6, 2) +#define PIN_PA18 18 +#define PIN_PA18__GPIO PINMUX_PIN(PIN_PA18, 0, 0) +#define PIN_PA18__SPI0_NPCS1 PINMUX_PIN(PIN_PA18, 1, 1) +#define PIN_PA18__RK1 PINMUX_PIN(PIN_PA18, 2, 1) +#define PIN_PA18__QSPI0_IO2 PINMUX_PIN(PIN_PA18, 3, 2) +#define PIN_PA18__I2SC1_DO0 PINMUX_PIN(PIN_PA18, 4, 2) +#define PIN_PA18__SDMMC1_DAT0 PINMUX_PIN(PIN_PA18, 5, 1) +#define PIN_PA18__D13 PINMUX_PIN(PIN_PA18, 6, 2) +#define PIN_PA19 19 +#define PIN_PA19__GPIO PINMUX_PIN(PIN_PA19, 0, 0) +#define PIN_PA19__SPI0_NPCS2 PINMUX_PIN(PIN_PA19, 1, 1) +#define PIN_PA19__RF1 PINMUX_PIN(PIN_PA19, 2, 1) +#define PIN_PA19__QSPI0_IO3 PINMUX_PIN(PIN_PA19, 3, 2) +#define PIN_PA19__TIOA0 PINMUX_PIN(PIN_PA19, 4, 1) +#define PIN_PA19__SDMMC1_DAT1 PINMUX_PIN(PIN_PA19, 5, 1) +#define PIN_PA19__D14 PINMUX_PIN(PIN_PA19, 6, 2) +#define PIN_PA20 20 +#define PIN_PA20__GPIO PINMUX_PIN(PIN_PA20, 0, 0) +#define PIN_PA20__SPI0_NPCS3 PINMUX_PIN(PIN_PA20, 1, 1) +#define PIN_PA20__TIOB0 PINMUX_PIN(PIN_PA20, 4, 1) +#define PIN_PA20__SDMMC1_DAT2 PINMUX_PIN(PIN_PA20, 5, 1) +#define PIN_PA20__D15 PINMUX_PIN(PIN_PA20, 6, 2) +#define PIN_PA21 21 +#define PIN_PA21__GPIO PINMUX_PIN(PIN_PA21, 0, 0) +#define PIN_PA21__IRQ PINMUX_PIN(PIN_PA21, 1, 2) +#define PIN_PA21__PCK2 PINMUX_PIN(PIN_PA21, 2, 3) +#define PIN_PA21__TCLK0 PINMUX_PIN(PIN_PA21, 4, 1) +#define PIN_PA21__SDMMC1_DAT3 PINMUX_PIN(PIN_PA21, 5, 1) +#define PIN_PA21__NANDRDY PINMUX_PIN(PIN_PA21, 6, 2) +#define PIN_PA22 22 +#define PIN_PA22__GPIO PINMUX_PIN(PIN_PA22, 0, 0) +#define PIN_PA22__FLEXCOM1_IO2 PINMUX_PIN(PIN_PA22, 1, 1) +#define PIN_PA22__D0 PINMUX_PIN(PIN_PA22, 2, 1) +#define PIN_PA22__TCK PINMUX_PIN(PIN_PA22, 3, 4) +#define PIN_PA22__SPI1_SPCK PINMUX_PIN(PIN_PA22, 4, 2) +#define PIN_PA22__SDMMC1_CK PINMUX_PIN(PIN_PA22, 5, 1) +#define PIN_PA22__QSPI0_SCK PINMUX_PIN(PIN_PA22, 6, 3) +#define PIN_PA23 23 +#define PIN_PA23__GPIO PINMUX_PIN(PIN_PA23, 0, 0) +#define PIN_PA23__FLEXCOM1_IO1 PINMUX_PIN(PIN_PA23, 1, 1) +#define PIN_PA23__D1 PINMUX_PIN(PIN_PA23, 2, 1) +#define PIN_PA23__TDI PINMUX_PIN(PIN_PA23, 3, 4) +#define PIN_PA23__SPI1_MOSI PINMUX_PIN(PIN_PA23, 4, 2) +#define PIN_PA23__QSPI0_CS PINMUX_PIN(PIN_PA23, 6, 3) +#define PIN_PA24 24 +#define PIN_PA24__GPIO PINMUX_PIN(PIN_PA24, 0, 0) +#define PIN_PA24__FLEXCOM1_IO0 PINMUX_PIN(PIN_PA24, 1, 1) +#define PIN_PA24__D2 PINMUX_PIN(PIN_PA24, 2, 1) +#define PIN_PA24__TDO PINMUX_PIN(PIN_PA24, 3, 4) +#define PIN_PA24__SPI1_MISO PINMUX_PIN(PIN_PA24, 4, 2) +#define PIN_PA24__QSPI0_IO0 PINMUX_PIN(PIN_PA24, 6, 3) +#define PIN_PA25 25 +#define PIN_PA25__GPIO PINMUX_PIN(PIN_PA25, 0, 0) +#define PIN_PA25__FLEXCOM1_IO3 PINMUX_PIN(PIN_PA25, 1, 1) +#define PIN_PA25__D3 PINMUX_PIN(PIN_PA25, 2, 1) +#define PIN_PA25__TMS PINMUX_PIN(PIN_PA25, 3, 4) +#define PIN_PA25__SPI1_NPCS0 PINMUX_PIN(PIN_PA25, 4, 2) +#define PIN_PA25__QSPI0_IO1 PINMUX_PIN(PIN_PA25, 6, 3) +#define PIN_PA26 26 +#define PIN_PA26__GPIO PINMUX_PIN(PIN_PA26, 0, 0) +#define PIN_PA26__FLEXCOM1_IO4 PINMUX_PIN(PIN_PA26, 1, 1) +#define PIN_PA26__D4 PINMUX_PIN(PIN_PA26, 2, 1) +#define PIN_PA26__NTRST PINMUX_PIN(PIN_PA26, 3, 4) +#define PIN_PA26__SPI1_NPCS1 PINMUX_PIN(PIN_PA26, 4, 2) +#define PIN_PA26__QSPI0_IO2 PINMUX_PIN(PIN_PA26, 6, 3) +#define PIN_PA27 27 +#define PIN_PA27__GPIO PINMUX_PIN(PIN_PA27, 0, 0) +#define PIN_PA27__TIOA1 PINMUX_PIN(PIN_PA27, 1, 2) +#define PIN_PA27__D5 PINMUX_PIN(PIN_PA27, 2, 1) +#define PIN_PA27__SPI0_NPCS2 PINMUX_PIN(PIN_PA27, 3, 2) +#define PIN_PA27__SPI1_NPCS2 PINMUX_PIN(PIN_PA27, 4, 2) +#define PIN_PA27__SDMMC1_RSTN PINMUX_PIN(PIN_PA27, 5, 1) +#define PIN_PA27__QSPI0_IO3 PINMUX_PIN(PIN_PA27, 6, 3) +#define PIN_PA28 28 +#define PIN_PA28__GPIO PINMUX_PIN(PIN_PA28, 0, 0) +#define PIN_PA28__TIOB1 PINMUX_PIN(PIN_PA28, 1, 2) +#define PIN_PA28__D6 PINMUX_PIN(PIN_PA28, 2, 1) +#define PIN_PA28__SPI0_NPCS3 PINMUX_PIN(PIN_PA28, 3, 2) +#define PIN_PA28__SPI1_NPCS3 PINMUX_PIN(PIN_PA28, 4, 2) +#define PIN_PA28__SDMMC1_CMD PINMUX_PIN(PIN_PA28, 5, 1) +#define PIN_PA28__CLASSD_L0 PINMUX_PIN(PIN_PA28, 6, 1) +#define PIN_PA29 29 +#define PIN_PA29__GPIO PINMUX_PIN(PIN_PA29, 0, 0) +#define PIN_PA29__TCLK1 PINMUX_PIN(PIN_PA29, 1, 2) +#define PIN_PA29__D7 PINMUX_PIN(PIN_PA29, 2, 1) +#define PIN_PA29__SPI0_NPCS1 PINMUX_PIN(PIN_PA29, 3, 2) +#define PIN_PA29__SDMMC1_WP PINMUX_PIN(PIN_PA29, 5, 1) +#define PIN_PA29__CLASSD_L1 PINMUX_PIN(PIN_PA29, 6, 1) +#define PIN_PA30 30 +#define PIN_PA30__GPIO PINMUX_PIN(PIN_PA30, 0, 0) +#define PIN_PA30__NWE_NANDWE PINMUX_PIN(PIN_PA30, 2, 1) +#define PIN_PA30__SPI0_NPCS0 PINMUX_PIN(PIN_PA30, 3, 2) +#define PIN_PA30__PWMH0 PINMUX_PIN(PIN_PA30, 4, 1) +#define PIN_PA30__SDMMC1_CD PINMUX_PIN(PIN_PA30, 5, 1) +#define PIN_PA30__CLASSD_L2 PINMUX_PIN(PIN_PA30, 6, 1) +#define PIN_PA31 31 +#define PIN_PA31__GPIO PINMUX_PIN(PIN_PA31, 0, 0) +#define PIN_PA31__NCS3 PINMUX_PIN(PIN_PA31, 2, 1) +#define PIN_PA31__SPI0_MISO PINMUX_PIN(PIN_PA31, 3, 2) +#define PIN_PA31__PWML0 PINMUX_PIN(PIN_PA31, 4, 1) +#define PIN_PA31__CLASSD_L3 PINMUX_PIN(PIN_PA31, 6, 1) +#define PIN_PB0 32 +#define PIN_PB0__GPIO PINMUX_PIN(PIN_PB0, 0, 0) +#define PIN_PB0__A21_NANDALE PINMUX_PIN(PIN_PB0, 2, 1) +#define PIN_PB0__SPI0_MOSI PINMUX_PIN(PIN_PB0, 3, 2) +#define PIN_PB0__PWMH1 PINMUX_PIN(PIN_PB0, 4, 1) +#define PIN_PB1 33 +#define PIN_PB1__GPIO PINMUX_PIN(PIN_PB1, 0, 0) +#define PIN_PB1__A22_NANDCLE PINMUX_PIN(PIN_PB1, 2, 1) +#define PIN_PB1__SPI0_SPCK PINMUX_PIN(PIN_PB1, 3, 2) +#define PIN_PB1__PWML1 PINMUX_PIN(PIN_PB1, 4, 1) +#define PIN_PB1__CLASSD_R0 PINMUX_PIN(PIN_PB1, 6, 1) +#define PIN_PB2 34 +#define PIN_PB2__GPIO PINMUX_PIN(PIN_PB2, 0, 0) +#define PIN_PB2__NRD_NANDOE PINMUX_PIN(PIN_PB2, 2, 1) +#define PIN_PB2__PWMFI0 PINMUX_PIN(PIN_PB2, 4, 1) +#define PIN_PB2__CLASSD_R1 PINMUX_PIN(PIN_PB2, 6, 1) +#define PIN_PB3 35 +#define PIN_PB3__GPIO PINMUX_PIN(PIN_PB3, 0, 0) +#define PIN_PB3__URXD4 PINMUX_PIN(PIN_PB3, 1, 1) +#define PIN_PB3__D8 PINMUX_PIN(PIN_PB3, 2, 1) +#define PIN_PB3__IRQ PINMUX_PIN(PIN_PB3, 3, 3) +#define PIN_PB3__PWMEXTRG0 PINMUX_PIN(PIN_PB3, 4, 1) +#define PIN_PB3__CLASSD_R2 PINMUX_PIN(PIN_PB3, 6, 1) +#define PIN_PB4 36 +#define PIN_PB4__GPIO PINMUX_PIN(PIN_PB4, 0, 0) +#define PIN_PB4__UTXD4 PINMUX_PIN(PIN_PB4, 1, 1) +#define PIN_PB4__D9 PINMUX_PIN(PIN_PB4, 2, 1) +#define PIN_PB4__FIQ PINMUX_PIN(PIN_PB4, 3, 4) +#define PIN_PB4__CLASSD_R3 PINMUX_PIN(PIN_PB4, 6, 1) +#define PIN_PB5 37 +#define PIN_PB5__GPIO PINMUX_PIN(PIN_PB5, 0, 0) +#define PIN_PB5__TCLK2 PINMUX_PIN(PIN_PB5, 1, 1) +#define PIN_PB5__D10 PINMUX_PIN(PIN_PB5, 2, 1) +#define PIN_PB5__PWMH2 PINMUX_PIN(PIN_PB5, 3, 1) +#define PIN_PB5__QSPI1_SCK PINMUX_PIN(PIN_PB5, 4, 2) +#define PIN_PB5__GTSUCOMP PINMUX_PIN(PIN_PB5, 6, 3) +#define PIN_PB6 38 +#define PIN_PB6__GPIO PINMUX_PIN(PIN_PB6, 0, 0) +#define PIN_PB6__TIOA2 PINMUX_PIN(PIN_PB6, 1, 1) +#define PIN_PB6__D11 PINMUX_PIN(PIN_PB6, 2, 1) +#define PIN_PB6__PWML2 PINMUX_PIN(PIN_PB6, 3, 1) +#define PIN_PB6__QSPI1_CS PINMUX_PIN(PIN_PB6, 4, 2) +#define PIN_PB6__GTXER PINMUX_PIN(PIN_PB6, 6, 3) +#define PIN_PB7 39 +#define PIN_PB7__GPIO PINMUX_PIN(PIN_PB7, 0, 0) +#define PIN_PB7__TIOB2 PINMUX_PIN(PIN_PB7, 1, 1) +#define PIN_PB7__D12 PINMUX_PIN(PIN_PB7, 2, 1) +#define PIN_PB7__PWMH3 PINMUX_PIN(PIN_PB7, 3, 1) +#define PIN_PB7__QSPI1_IO0 PINMUX_PIN(PIN_PB7, 4, 2) +#define PIN_PB7__GRXCK PINMUX_PIN(PIN_PB7, 6, 3) +#define PIN_PB8 40 +#define PIN_PB8__GPIO PINMUX_PIN(PIN_PB8, 0, 0) +#define PIN_PB8__TCLK3 PINMUX_PIN(PIN_PB8, 1, 1) +#define PIN_PB8__D13 PINMUX_PIN(PIN_PB8, 2, 1) +#define PIN_PB8__PWML3 PINMUX_PIN(PIN_PB8, 3, 1) +#define PIN_PB8__QSPI1_IO1 PINMUX_PIN(PIN_PB8, 4, 2) +#define PIN_PB8__GCRS PINMUX_PIN(PIN_PB8, 6, 3) +#define PIN_PB9 41 +#define PIN_PB9__GPIO PINMUX_PIN(PIN_PB9, 0, 0) +#define PIN_PB9__TIOA3 PINMUX_PIN(PIN_PB9, 1, 1) +#define PIN_PB9__D14 PINMUX_PIN(PIN_PB9, 2, 1) +#define PIN_PB9__PWMFI1 PINMUX_PIN(PIN_PB9, 3, 1) +#define PIN_PB9__QSPI1_IO2 PINMUX_PIN(PIN_PB9, 4, 2) +#define PIN_PB9__GCOL PINMUX_PIN(PIN_PB9, 6, 3) +#define PIN_PB10 42 +#define PIN_PB10__GPIO PINMUX_PIN(PIN_PB10, 0, 0) +#define PIN_PB10__TIOB3 PINMUX_PIN(PIN_PB10, 1, 1) +#define PIN_PB10__D15 PINMUX_PIN(PIN_PB10, 2, 1) +#define PIN_PB10__PWMEXTRG1 PINMUX_PIN(PIN_PB10, 3, 1) +#define PIN_PB10__QSPI1_IO3 PINMUX_PIN(PIN_PB10, 4, 2) +#define PIN_PB10__GRX2 PINMUX_PIN(PIN_PB10, 6, 3) +#define PIN_PB11 43 +#define PIN_PB11__GPIO PINMUX_PIN(PIN_PB11, 0, 0) +#define PIN_PB11__LCDDAT0 PINMUX_PIN(PIN_PB11, 1, 1) +#define PIN_PB11__A0_NBS0 PINMUX_PIN(PIN_PB11, 2, 1) +#define PIN_PB11__URXD3 PINMUX_PIN(PIN_PB11, 3, 3) +#define PIN_PB11__PDMIC_DAT PINMUX_PIN(PIN_PB11, 4, 2) +#define PIN_PB11__GRX3 PINMUX_PIN(PIN_PB11, 6, 3) +#define PIN_PB12 44 +#define PIN_PB12__GPIO PINMUX_PIN(PIN_PB12, 0, 0) +#define PIN_PB12__LCDDAT1 PINMUX_PIN(PIN_PB12, 1, 1) +#define PIN_PB12__A1 PINMUX_PIN(PIN_PB12, 2, 1) +#define PIN_PB12__UTXD3 PINMUX_PIN(PIN_PB12, 3, 3) +#define PIN_PB12__PDMIC_CLK PINMUX_PIN(PIN_PB12, 4, 2) +#define PIN_PB12__GTX2 PINMUX_PIN(PIN_PB12, 6, 3) +#define PIN_PB13 45 +#define PIN_PB13__GPIO PINMUX_PIN(PIN_PB13, 0, 0) +#define PIN_PB13__LCDDAT2 PINMUX_PIN(PIN_PB13, 1, 1) +#define PIN_PB13__A2 PINMUX_PIN(PIN_PB13, 2, 1) +#define PIN_PB13__PCK1 PINMUX_PIN(PIN_PB13, 3, 3) +#define PIN_PB13__GTX3 PINMUX_PIN(PIN_PB13, 6, 3) +#define PIN_PB14 46 +#define PIN_PB14__GPIO PINMUX_PIN(PIN_PB14, 0, 0) +#define PIN_PB14__LCDDAT3 PINMUX_PIN(PIN_PB14, 1, 1) +#define PIN_PB14__A3 PINMUX_PIN(PIN_PB14, 2, 1) +#define PIN_PB14__TK1 PINMUX_PIN(PIN_PB14, 3, 2) +#define PIN_PB14__I2SC1_MCK PINMUX_PIN(PIN_PB14, 4, 1) +#define PIN_PB14__QSPI1_SCK PINMUX_PIN(PIN_PB14, 5, 3) +#define PIN_PB14__GTXCK PINMUX_PIN(PIN_PB14, 6, 3) +#define PIN_PB15 47 +#define PIN_PB15__GPIO PINMUX_PIN(PIN_PB15, 0, 0) +#define PIN_PB15__LCDDAT4 PINMUX_PIN(PIN_PB15, 1, 1) +#define PIN_PB15__A4 PINMUX_PIN(PIN_PB15, 2, 1) +#define PIN_PB15__TF1 PINMUX_PIN(PIN_PB15, 3, 2) +#define PIN_PB15__I2SC1_CK PINMUX_PIN(PIN_PB15, 4, 1) +#define PIN_PB15__QSPI1_CS PINMUX_PIN(PIN_PB15, 5, 3) +#define PIN_PB15__GTXEN PINMUX_PIN(PIN_PB15, 6, 3) +#define PIN_PB16 48 +#define PIN_PB16__GPIO PINMUX_PIN(PIN_PB16, 0, 0) +#define PIN_PB16__LCDDAT5 PINMUX_PIN(PIN_PB16, 1, 1) +#define PIN_PB16__A5 PINMUX_PIN(PIN_PB16, 2, 1) +#define PIN_PB16__TD1 PINMUX_PIN(PIN_PB16, 3, 2) +#define PIN_PB16__I2SC1_WS PINMUX_PIN(PIN_PB16, 4, 1) +#define PIN_PB16__QSPI1_IO0 PINMUX_PIN(PIN_PB16, 5, 3) +#define PIN_PB16__GRXDV PINMUX_PIN(PIN_PB16, 6, 3) +#define PIN_PB17 49 +#define PIN_PB17__GPIO PINMUX_PIN(PIN_PB17, 0, 0) +#define PIN_PB17__LCDDAT6 PINMUX_PIN(PIN_PB17, 1, 1) +#define PIN_PB17__A6 PINMUX_PIN(PIN_PB17, 2, 1) +#define PIN_PB17__RD1 PINMUX_PIN(PIN_PB17, 3, 2) +#define PIN_PB17__I2SC1_DI0 PINMUX_PIN(PIN_PB17, 4, 1) +#define PIN_PB17__QSPI1_IO1 PINMUX_PIN(PIN_PB17, 5, 3) +#define PIN_PB17__GRXER PINMUX_PIN(PIN_PB17, 6, 3) +#define PIN_PB18 50 +#define PIN_PB18__GPIO PINMUX_PIN(PIN_PB18, 0, 0) +#define PIN_PB18__LCDDAT7 PINMUX_PIN(PIN_PB18, 1, 1) +#define PIN_PB18__A7 PINMUX_PIN(PIN_PB18, 2, 1) +#define PIN_PB18__RK1 PINMUX_PIN(PIN_PB18, 3, 2) +#define PIN_PB18__I2SC1_DO0 PINMUX_PIN(PIN_PB18, 4, 1) +#define PIN_PB18__QSPI1_IO2 PINMUX_PIN(PIN_PB18, 5, 3) +#define PIN_PB18__GRX0 PINMUX_PIN(PIN_PB18, 6, 3) +#define PIN_PB19 51 +#define PIN_PB19__GPIO PINMUX_PIN(PIN_PB19, 0, 0) +#define PIN_PB19__LCDDAT8 PINMUX_PIN(PIN_PB19, 1, 1) +#define PIN_PB19__A8 PINMUX_PIN(PIN_PB19, 2, 1) +#define PIN_PB19__RF1 PINMUX_PIN(PIN_PB19, 3, 2) +#define PIN_PB19__TIOA3 PINMUX_PIN(PIN_PB19, 4, 2) +#define PIN_PB19__QSPI1_IO3 PINMUX_PIN(PIN_PB19, 5, 3) +#define PIN_PB19__GRX1 PINMUX_PIN(PIN_PB19, 6, 3) +#define PIN_PB20 52 +#define PIN_PB20__GPIO PINMUX_PIN(PIN_PB20, 0, 0) +#define PIN_PB20__LCDDAT9 PINMUX_PIN(PIN_PB20, 1, 1) +#define PIN_PB20__A9 PINMUX_PIN(PIN_PB20, 2, 1) +#define PIN_PB20__TK0 PINMUX_PIN(PIN_PB20, 3, 1) +#define PIN_PB20__TIOB3 PINMUX_PIN(PIN_PB20, 4, 2) +#define PIN_PB20__PCK1 PINMUX_PIN(PIN_PB20, 5, 4) +#define PIN_PB20__GTX0 PINMUX_PIN(PIN_PB20, 6, 3) +#define PIN_PB21 53 +#define PIN_PB21__GPIO PINMUX_PIN(PIN_PB21, 0, 0) +#define PIN_PB21__LCDDAT10 PINMUX_PIN(PIN_PB21, 1, 1) +#define PIN_PB21__A10 PINMUX_PIN(PIN_PB21, 2, 1) +#define PIN_PB21__TF0 PINMUX_PIN(PIN_PB21, 3, 1) +#define PIN_PB21__TCLK3 PINMUX_PIN(PIN_PB21, 4, 2) +#define PIN_PB21__FLEXCOM3_IO2 PINMUX_PIN(PIN_PB21, 5, 3) +#define PIN_PB21__GTX1 PINMUX_PIN(PIN_PB21, 6, 3) +#define PIN_PB22 54 +#define PIN_PB22__GPIO PINMUX_PIN(PIN_PB22, 0, 0) +#define PIN_PB22__LCDDAT11 PINMUX_PIN(PIN_PB22, 1, 1) +#define PIN_PB22__A11 PINMUX_PIN(PIN_PB22, 2, 1) +#define PIN_PB22__TDO PINMUX_PIN(PIN_PB22, 3, 1) +#define PIN_PB22__TIOA2 PINMUX_PIN(PIN_PB22, 4, 2) +#define PIN_PB22__FLEXCOM3_IO1 PINMUX_PIN(PIN_PB22, 5, 3) +#define PIN_PB22__GMDC PINMUX_PIN(PIN_PB22, 6, 3) +#define PIN_PB23 55 +#define PIN_PB23__GPIO PINMUX_PIN(PIN_PB23, 0, 0) +#define PIN_PB23__LCDDAT12 PINMUX_PIN(PIN_PB23, 1, 1) +#define PIN_PB23__A12 PINMUX_PIN(PIN_PB23, 2, 1) +#define PIN_PB23__RD0 PINMUX_PIN(PIN_PB23, 3, 1) +#define PIN_PB23__TIOB2 PINMUX_PIN(PIN_PB23, 4, 2) +#define PIN_PB23__FLEXCOM3_IO0 PINMUX_PIN(PIN_PB23, 5, 3) +#define PIN_PB23__GMDIO PINMUX_PIN(PIN_PB23, 6, 3) +#define PIN_PB24 56 +#define PIN_PB24__GPIO PINMUX_PIN(PIN_PB24, 0, 0) +#define PIN_PB24__LCDDAT13 PINMUX_PIN(PIN_PB24, 1, 1) +#define PIN_PB24__A13 PINMUX_PIN(PIN_PB24, 2, 1) +#define PIN_PB24__RK0 PINMUX_PIN(PIN_PB24, 3, 1) +#define PIN_PB24__TCLK2 PINMUX_PIN(PIN_PB24, 4, 2) +#define PIN_PB24__FLEXCOM3_IO3 PINMUX_PIN(PIN_PB24, 5, 3) +#define PIN_PB24__ISC_D10 PINMUX_PIN(PIN_PB24, 6, 3) +#define PIN_PB25 57 +#define PIN_PB25__GPIO PINMUX_PIN(PIN_PB25, 0, 0) +#define PIN_PB25__LCDDAT14 PINMUX_PIN(PIN_PB25, 1, 1) +#define PIN_PB25__A14 PINMUX_PIN(PIN_PB25, 2, 1) +#define PIN_PB25__RF0 PINMUX_PIN(PIN_PB25, 3, 1) +#define PIN_PB25__FLEXCOM3_IO4 PINMUX_PIN(PIN_PB25, 5, 3) +#define PIN_PB25__ISC_D11 PINMUX_PIN(PIN_PB25, 6, 3) +#define PIN_PB26 58 +#define PIN_PB26__GPIO PINMUX_PIN(PIN_PB26, 0, 0) +#define PIN_PB26__LCDDAT15 PINMUX_PIN(PIN_PB26, 1, 1) +#define PIN_PB26__A15 PINMUX_PIN(PIN_PB26, 2, 1) +#define PIN_PB26__URXD0 PINMUX_PIN(PIN_PB26, 3, 1) +#define PIN_PB26__PDMIC_DAT PINMUX_PIN(PIN_PB26, 4, 1) +#define PIN_PB26__ISC_D0 PINMUX_PIN(PIN_PB26, 6, 3) +#define PIN_PB27 59 +#define PIN_PB27__GPIO PINMUX_PIN(PIN_PB27, 0, 0) +#define PIN_PB27__LCDDAT16 PINMUX_PIN(PIN_PB27, 1, 1) +#define PIN_PB27__A16 PINMUX_PIN(PIN_PB27, 2, 1) +#define PIN_PB27__UTXD0 PINMUX_PIN(PIN_PB27, 3, 1) +#define PIN_PB27__PDMIC_CLK PINMUX_PIN(PIN_PB27, 4, 1) +#define PIN_PB27__ISC_D1 PINMUX_PIN(PIN_PB27, 6, 3) +#define PIN_PB28 60 +#define PIN_PB28__GPIO PINMUX_PIN(PIN_PB28, 0, 0) +#define PIN_PB28__LCDDAT17 PINMUX_PIN(PIN_PB28, 1, 1) +#define PIN_PB28__A17 PINMUX_PIN(PIN_PB28, 2, 1) +#define PIN_PB28__FLEXCOM0_IO0 PINMUX_PIN(PIN_PB28, 3, 1) +#define PIN_PB28__TIOA5 PINMUX_PIN(PIN_PB28, 4, 2) +#define PIN_PB28__ISC_D2 PINMUX_PIN(PIN_PB28, 6, 3) +#define PIN_PB29 61 +#define PIN_PB29__GPIO PINMUX_PIN(PIN_PB29, 0, 0) +#define PIN_PB29__LCDDAT18 PINMUX_PIN(PIN_PB29, 1, 1) +#define PIN_PB29__A18 PINMUX_PIN(PIN_PB29, 2, 1) +#define PIN_PB29__FLEXCOM0_IO1 PINMUX_PIN(PIN_PB29, 3, 1) +#define PIN_PB29__TIOB5 PINMUX_PIN(PIN_PB29, 4, 2) +#define PIN_PB29__ISC_D3 PINMUX_PIN(PIN_PB29, 7, 3) +#define PIN_PB30 62 +#define PIN_PB30__GPIO PINMUX_PIN(PIN_PB30, 0, 0) +#define PIN_PB30__LCDDAT19 PINMUX_PIN(PIN_PB30, 1, 1) +#define PIN_PB30__A19 PINMUX_PIN(PIN_PB30, 2, 1) +#define PIN_PB30__FLEXCOM0_IO2 PINMUX_PIN(PIN_PB30, 3, 1) +#define PIN_PB30__TCLK5 PINMUX_PIN(PIN_PB30, 4, 2) +#define PIN_PB30__ISC_D4 PINMUX_PIN(PIN_PB30, 6, 3) +#define PIN_PB31 63 +#define PIN_PB31__GPIO PINMUX_PIN(PIN_PB31, 0, 0) +#define PIN_PB31__LCDDAT20 PINMUX_PIN(PIN_PB31, 1, 1) +#define PIN_PB31__A20 PINMUX_PIN(PIN_PB31, 2, 1) +#define PIN_PB31__FLEXCOM0_IO3 PINMUX_PIN(PIN_PB31, 3, 1) +#define PIN_PB31__TWD0 PINMUX_PIN(PIN_PB31, 4, 1) +#define PIN_PB31__ISC_D5 PINMUX_PIN(PIN_PB31, 6, 3) +#define PIN_PC0 64 +#define PIN_PC0__GPIO PINMUX_PIN(PIN_PC0, 0, 0) +#define PIN_PC0__LCDDAT21 PINMUX_PIN(PIN_PC0, 1, 1) +#define PIN_PC0__A23 PINMUX_PIN(PIN_PC0, 2, 1) +#define PIN_PC0__FLEXCOM0_IO4 PINMUX_PIN(PIN_PC0, 3, 1) +#define PIN_PC0__TWCK0 PINMUX_PIN(PIN_PC0, 4, 1) +#define PIN_PC0__ISC_D6 PINMUX_PIN(PIN_PC0, 6, 3) +#define PIN_PC1 65 +#define PIN_PC1__GPIO PINMUX_PIN(PIN_PC1, 0, 0) +#define PIN_PC1__LCDDAT22 PINMUX_PIN(PIN_PC1, 1, 1) +#define PIN_PC1__A24 PINMUX_PIN(PIN_PC1, 2, 1) +#define PIN_PC1__CANTX0 PINMUX_PIN(PIN_PC1, 3, 1) +#define PIN_PC1__SPI1_SPCK PINMUX_PIN(PIN_PC1, 4, 1) +#define PIN_PC1__I2SC0_CK PINMUX_PIN(PIN_PC1, 5, 1) +#define PIN_PC1__ISC_D7 PINMUX_PIN(PIN_PC1, 6, 3) +#define PIN_PC2 66 +#define PIN_PC2__GPIO PINMUX_PIN(PIN_PC2, 0, 0) +#define PIN_PC2__LCDDAT23 PINMUX_PIN(PIN_PC2, 1, 1) +#define PIN_PC2__A25 PINMUX_PIN(PIN_PC2, 2, 1) +#define PIN_PC2__CANRX0 PINMUX_PIN(PIN_PC2, 3, 1) +#define PIN_PC2__SPI1_MOSI PINMUX_PIN(PIN_PC2, 4, 1) +#define PIN_PC2__I2SC0_MCK PINMUX_PIN(PIN_PC2, 5, 1) +#define PIN_PC2__ISC_D8 PINMUX_PIN(PIN_PC2, 6, 3) +#define PIN_PC3 67 +#define PIN_PC3__GPIO PINMUX_PIN(PIN_PC3, 0, 0) +#define PIN_PC3__LCDPWM PINMUX_PIN(PIN_PC3, 1, 1) +#define PIN_PC3__NWAIT PINMUX_PIN(PIN_PC3, 2, 1) +#define PIN_PC3__TIOA1 PINMUX_PIN(PIN_PC3, 3, 1) +#define PIN_PC3__SPI1_MISO PINMUX_PIN(PIN_PC3, 4, 1) +#define PIN_PC3__I2SC0_WS PINMUX_PIN(PIN_PC3, 5, 1) +#define PIN_PC3__ISC_D9 PINMUX_PIN(PIN_PC3, 6, 3) +#define PIN_PC4 68 +#define PIN_PC4__GPIO PINMUX_PIN(PIN_PC4, 0, 0) +#define PIN_PC4__LCDDISP PINMUX_PIN(PIN_PC4, 1, 1) +#define PIN_PC4__NWR1_NBS1 PINMUX_PIN(PIN_PC4, 2, 1) +#define PIN_PC4__TIOB1 PINMUX_PIN(PIN_PC4, 3, 1) +#define PIN_PC4__SPI1_NPCS0 PINMUX_PIN(PIN_PC4, 4, 1) +#define PIN_PC4__I2SC0_DI0 PINMUX_PIN(PIN_PC4, 5, 1) +#define PIN_PC4__ISC_PCK PINMUX_PIN(PIN_PC4, 6, 3) +#define PIN_PC5 69 +#define PIN_PC5__GPIO PINMUX_PIN(PIN_PC5, 0, 0) +#define PIN_PC5__LCDVSYNC PINMUX_PIN(PIN_PC5, 1, 1) +#define PIN_PC5__NCS0 PINMUX_PIN(PIN_PC5, 2, 1) +#define PIN_PC5__TCLK1 PINMUX_PIN(PIN_PC5, 3, 1) +#define PIN_PC5__SPI1_NPCS1 PINMUX_PIN(PIN_PC5, 4, 1) +#define PIN_PC5__I2SC0_DO0 PINMUX_PIN(PIN_PC5, 5, 1) +#define PIN_PC5__ISC_VSYNC PINMUX_PIN(PIN_PC5, 6, 3) +#define PIN_PC6 70 +#define PIN_PC6__GPIO PINMUX_PIN(PIN_PC6, 0, 0) +#define PIN_PC6__LCDHSYNC PINMUX_PIN(PIN_PC6, 1, 1) +#define PIN_PC6__NCS1 PINMUX_PIN(PIN_PC6, 2, 1) +#define PIN_PC6__TWD1 PINMUX_PIN(PIN_PC6, 3, 1) +#define PIN_PC6__SPI1_NPCS2 PINMUX_PIN(PIN_PC6, 4, 1) +#define PIN_PC6__ISC_HSYNC PINMUX_PIN(PIN_PC6, 6, 3) +#define PIN_PC7 71 +#define PIN_PC7__GPIO PINMUX_PIN(PIN_PC7, 0, 0) +#define PIN_PC7__LCDPCK PINMUX_PIN(PIN_PC7, 1, 1) +#define PIN_PC7__NCS2 PINMUX_PIN(PIN_PC7, 2, 1) +#define PIN_PC7__TWCK1 PINMUX_PIN(PIN_PC7, 3, 1) +#define PIN_PC7__SPI1_NPCS3 PINMUX_PIN(PIN_PC7, 4, 1) +#define PIN_PC7__URXD1 PINMUX_PIN(PIN_PC7, 5, 2) +#define PIN_PC7__ISC_MCK PINMUX_PIN(PIN_PC7, 6, 3) +#define PIN_PC8 72 +#define PIN_PC8__GPIO PINMUX_PIN(PIN_PC8, 0, 0) +#define PIN_PC8__LCDDEN PINMUX_PIN(PIN_PC8, 1, 1) +#define PIN_PC8__NANDRDY PINMUX_PIN(PIN_PC8, 2, 1) +#define PIN_PC8__FIQ PINMUX_PIN(PIN_PC8, 3, 1) +#define PIN_PC8__PCK0 PINMUX_PIN(PIN_PC8, 4, 3) +#define PIN_PC8__UTXD1 PINMUX_PIN(PIN_PC8, 5, 2) +#define PIN_PC8__ISC_FIELD PINMUX_PIN(PIN_PC8, 6, 3) +#define PIN_PC9 73 +#define PIN_PC9__GPIO PINMUX_PIN(PIN_PC9, 0, 0) +#define PIN_PC9__FIQ PINMUX_PIN(PIN_PC9, 1, 3) +#define PIN_PC9__GTSUCOMP PINMUX_PIN(PIN_PC9, 2, 1) +#define PIN_PC9__ISC_D0 PINMUX_PIN(PIN_PC9, 2, 1) +#define PIN_PC9__TIOA4 PINMUX_PIN(PIN_PC9, 4, 2) +#define PIN_PC10 74 +#define PIN_PC10__GPIO PINMUX_PIN(PIN_PC10, 0, 0) +#define PIN_PC10__LCDDAT2 PINMUX_PIN(PIN_PC10, 1, 2) +#define PIN_PC10__GTXCK PINMUX_PIN(PIN_PC10, 2, 1) +#define PIN_PC10__ISC_D1 PINMUX_PIN(PIN_PC10, 3, 1) +#define PIN_PC10__TIOB4 PINMUX_PIN(PIN_PC10, 4, 2) +#define PIN_PC10__CANTX0 PINMUX_PIN(PIN_PC10, 5, 2) +#define PIN_PC11 75 +#define PIN_PC11__GPIO PINMUX_PIN(PIN_PC11, 0, 0) +#define PIN_PC11__LCDDAT3 PINMUX_PIN(PIN_PC11, 1, 2) +#define PIN_PC11__GTXEN PINMUX_PIN(PIN_PC11, 2, 1) +#define PIN_PC11__ISC_D2 PINMUX_PIN(PIN_PC11, 3, 1) +#define PIN_PC11__TCLK4 PINMUX_PIN(PIN_PC11, 4, 2) +#define PIN_PC11__CANRX0 PINMUX_PIN(PIN_PC11, 5, 2) +#define PIN_PC11__A0_NBS0 PINMUX_PIN(PIN_PC11, 6, 2) +#define PIN_PC12 76 +#define PIN_PC12__GPIO PINMUX_PIN(PIN_PC12, 0, 0) +#define PIN_PC12__LCDDAT4 PINMUX_PIN(PIN_PC12, 1, 2) +#define PIN_PC12__GRXDV PINMUX_PIN(PIN_PC12, 2, 1) +#define PIN_PC12__ISC_D3 PINMUX_PIN(PIN_PC12, 3, 1) +#define PIN_PC12__URXD3 PINMUX_PIN(PIN_PC12, 4, 1) +#define PIN_PC12__TK0 PINMUX_PIN(PIN_PC12, 5, 2) +#define PIN_PC12__A1 PINMUX_PIN(PIN_PC12, 6, 2) +#define PIN_PC13 77 +#define PIN_PC13__GPIO PINMUX_PIN(PIN_PC13, 0, 0) +#define PIN_PC13__LCDDAT5 PINMUX_PIN(PIN_PC13, 1, 2) +#define PIN_PC13__GRXER PINMUX_PIN(PIN_PC13, 2, 1) +#define PIN_PC13__ISC_D4 PINMUX_PIN(PIN_PC13, 3, 1) +#define PIN_PC13__UTXD3 PINMUX_PIN(PIN_PC13, 4, 1) +#define PIN_PC13__TF0 PINMUX_PIN(PIN_PC13, 5, 2) +#define PIN_PC13__A2 PINMUX_PIN(PIN_PC13, 6, 2) +#define PIN_PC14 78 +#define PIN_PC14__GPIO PINMUX_PIN(PIN_PC14, 0, 0) +#define PIN_PC14__LCDDAT6 PINMUX_PIN(PIN_PC14, 1, 2) +#define PIN_PC14__GRX0 PINMUX_PIN(PIN_PC14, 2, 1) +#define PIN_PC14__ISC_D5 PINMUX_PIN(PIN_PC14, 3, 1) +#define PIN_PC14__TDO PINMUX_PIN(PIN_PC14, 5, 2) +#define PIN_PC14__A3 PINMUX_PIN(PIN_PC14, 6, 2) +#define PIN_PC15 79 +#define PIN_PC15__GPIO PINMUX_PIN(PIN_PC15, 0, 0) +#define PIN_PC15__LCDDAT7 PINMUX_PIN(PIN_PC15, 1, 2) +#define PIN_PC15__GRX1 PINMUX_PIN(PIN_PC15, 2, 1) +#define PIN_PC15__ISC_D6 PINMUX_PIN(PIN_PC15, 3, 1) +#define PIN_PC15__RD0 PINMUX_PIN(PIN_PC15, 5, 2) +#define PIN_PC15__A4 PINMUX_PIN(PIN_PC15, 6, 2) +#define PIN_PC16 80 +#define PIN_PC16__GPIO PINMUX_PIN(PIN_PC16, 0, 0) +#define PIN_PC16__LCDDAT10 PINMUX_PIN(PIN_PC16, 1, 2) +#define PIN_PC16__GTX0 PINMUX_PIN(PIN_PC16, 2, 1) +#define PIN_PC16__ISC_D7 PINMUX_PIN(PIN_PC16, 3, 1) +#define PIN_PC16__RK0 PINMUX_PIN(PIN_PC16, 5, 2) +#define PIN_PC16__A5 PINMUX_PIN(PIN_PC16, 6, 2) +#define PIN_PC17 81 +#define PIN_PC17__GPIO PINMUX_PIN(PIN_PC17, 0, 0) +#define PIN_PC17__LCDDAT11 PINMUX_PIN(PIN_PC17, 1, 2) +#define PIN_PC17__GTX1 PINMUX_PIN(PIN_PC17, 2, 1) +#define PIN_PC17__ISC_D8 PINMUX_PIN(PIN_PC17, 3, 1) +#define PIN_PC17__RF0 PINMUX_PIN(PIN_PC17, 5, 2) +#define PIN_PC17__A6 PINMUX_PIN(PIN_PC17, 6, 2) +#define PIN_PC18 82 +#define PIN_PC18__GPIO PINMUX_PIN(PIN_PC18, 0, 0) +#define PIN_PC18__LCDDAT12 PINMUX_PIN(PIN_PC18, 1, 2) +#define PIN_PC18__GMDC PINMUX_PIN(PIN_PC18, 2, 1) +#define PIN_PC18__ISC_D9 PINMUX_PIN(PIN_PC18, 3, 1) +#define PIN_PC18__FLEXCOM3_IO2 PINMUX_PIN(PIN_PC18, 5, 2) +#define PIN_PC18__A7 PINMUX_PIN(PIN_PC18, 6, 2) +#define PIN_PC19 83 +#define PIN_PC19__GPIO PINMUX_PIN(PIN_PC19, 0, 0) +#define PIN_PC19__LCDDAT13 PINMUX_PIN(PIN_PC19, 1, 2) +#define PIN_PC19__GMDIO PINMUX_PIN(PIN_PC19, 2, 1) +#define PIN_PC19__ISC_D10 PINMUX_PIN(PIN_PC19, 3, 1) +#define PIN_PC19__FLEXCOM3_IO1 PINMUX_PIN(PIN_PC19, 5, 2) +#define PIN_PC19__A8 PINMUX_PIN(PIN_PC19, 6, 2) +#define PIN_PC20 84 +#define PIN_PC20__GPIO PINMUX_PIN(PIN_PC20, 0, 0) +#define PIN_PC20__LCDDAT14 PINMUX_PIN(PIN_PC20, 1, 2) +#define PIN_PC20__GRXCK PINMUX_PIN(PIN_PC20, 2, 1) +#define PIN_PC20__ISC_D11 PINMUX_PIN(PIN_PC20, 3, 1) +#define PIN_PC20__FLEXCOM3_IO0 PINMUX_PIN(PIN_PC20, 5, 2) +#define PIN_PC20__A9 PINMUX_PIN(PIN_PC20, 6, 2) +#define PIN_PC21 85 +#define PIN_PC21__GPIO PINMUX_PIN(PIN_PC21, 0, 0) +#define PIN_PC21__LCDDAT15 PINMUX_PIN(PIN_PC21, 1, 2) +#define PIN_PC21__GTXER PINMUX_PIN(PIN_PC21, 2, 1) +#define PIN_PC21__ISC_PCK PINMUX_PIN(PIN_PC21, 3, 1) +#define PIN_PC21__FLEXCOM3_IO3 PINMUX_PIN(PIN_PC21, 5, 2) +#define PIN_PC21__A10 PINMUX_PIN(PIN_PC21, 6, 2) +#define PIN_PC22 86 +#define PIN_PC22__GPIO PINMUX_PIN(PIN_PC22, 0, 0) +#define PIN_PC22__LCDDAT18 PINMUX_PIN(PIN_PC22, 1, 2) +#define PIN_PC22__GCRS PINMUX_PIN(PIN_PC22, 2, 1) +#define PIN_PC22__ISC_VSYNC PINMUX_PIN(PIN_PC22, 3, 1) +#define PIN_PC22__FLEXCOM3_IO4 PINMUX_PIN(PIN_PC22, 5, 2) +#define PIN_PC22__A11 PINMUX_PIN(PIN_PC22, 6, 2) +#define PIN_PC23 87 +#define PIN_PC23__GPIO PINMUX_PIN(PIN_PC23, 0, 0) +#define PIN_PC23__LCDDAT19 PINMUX_PIN(PIN_PC23, 1, 2) +#define PIN_PC23__GCOL PINMUX_PIN(PIN_PC23, 2, 1) +#define PIN_PC23__ISC_HSYNC PINMUX_PIN(PIN_PC23, 3, 1) +#define PIN_PC23__A12 PINMUX_PIN(PIN_PC23, 6, 2) +#define PIN_PC24 88 +#define PIN_PC24__GPIO PINMUX_PIN(PIN_PC24, 0, 0) +#define PIN_PC24__LCDDAT20 PINMUX_PIN(PIN_PC24, 1, 2) +#define PIN_PC24__GRX2 PINMUX_PIN(PIN_PC24, 2, 1) +#define PIN_PC24__ISC_MCK PINMUX_PIN(PIN_PC24, 3, 1) +#define PIN_PC24__A13 PINMUX_PIN(PIN_PC24, 6, 2) +#define PIN_PC25 89 +#define PIN_PC25__GPIO PINMUX_PIN(PIN_PC25, 0, 0) +#define PIN_PC25__LCDDAT21 PINMUX_PIN(PIN_PC25, 1, 2) +#define PIN_PC25__GRX3 PINMUX_PIN(PIN_PC25, 2, 1) +#define PIN_PC25__ISC_FIELD PINMUX_PIN(PIN_PC25, 3, 1) +#define PIN_PC25__A14 PINMUX_PIN(PIN_PC25, 6, 2) +#define PIN_PC26 90 +#define PIN_PC26__GPIO PINMUX_PIN(PIN_PC26, 0, 0) +#define PIN_PC26__LCDDAT22 PINMUX_PIN(PIN_PC26, 1, 2) +#define PIN_PC26__GTX2 PINMUX_PIN(PIN_PC26, 2, 1) +#define PIN_PC26__CANTX1 PINMUX_PIN(PIN_PC26, 4, 1) +#define PIN_PC26__A15 PINMUX_PIN(PIN_PC26, 6, 2) +#define PIN_PC27 91 +#define PIN_PC27__GPIO PINMUX_PIN(PIN_PC27, 0, 0) +#define PIN_PC27__LCDDAT23 PINMUX_PIN(PIN_PC27, 1, 2) +#define PIN_PC27__GTX3 PINMUX_PIN(PIN_PC27, 2, 1) +#define PIN_PC27__PCK1 PINMUX_PIN(PIN_PC27, 3, 2) +#define PIN_PC27__CANRX1 PINMUX_PIN(PIN_PC27, 4, 1) +#define PIN_PC27__TWD0 PINMUX_PIN(PIN_PC27, 5, 2) +#define PIN_PC27__A16 PINMUX_PIN(PIN_PC27, 6, 2) +#define PIN_PC28 92 +#define PIN_PC28__GPIO PINMUX_PIN(PIN_PC28, 0, 0) +#define PIN_PC28__LCDPWM PINMUX_PIN(PIN_PC28, 1, 2) +#define PIN_PC28__FLEXCOM4_IO0 PINMUX_PIN(PIN_PC28, 2, 1) +#define PIN_PC28__PCK2 PINMUX_PIN(PIN_PC28, 3, 2) +#define PIN_PC28__TWCK0 PINMUX_PIN(PIN_PC28, 5, 2) +#define PIN_PC28__A17 PINMUX_PIN(PIN_PC28, 6, 2) +#define PIN_PC29 93 +#define PIN_PC29__GPIO PINMUX_PIN(PIN_PC29, 0, 0) +#define PIN_PC29__LCDDISP PINMUX_PIN(PIN_PC29, 1, 2) +#define PIN_PC29__FLEXCOM4_IO1 PINMUX_PIN(PIN_PC29, 2, 1) +#define PIN_PC29__A18 PINMUX_PIN(PIN_PC29, 6, 2) +#define PIN_PC30 94 +#define PIN_PC30__GPIO PINMUX_PIN(PIN_PC30, 0, 0) +#define PIN_PC30__LCDVSYNC PINMUX_PIN(PIN_PC30, 1, 2) +#define PIN_PC30__FLEXCOM4_IO2 PINMUX_PIN(PIN_PC30, 2, 1) +#define PIN_PC30__A19 PINMUX_PIN(PIN_PC30, 6, 2) +#define PIN_PC31 95 +#define PIN_PC31__GPIO PINMUX_PIN(PIN_PC31, 0, 0) +#define PIN_PC31__LCDHSYNC PINMUX_PIN(PIN_PC31, 1, 2) +#define PIN_PC31__FLEXCOM4_IO3 PINMUX_PIN(PIN_PC31, 2, 1) +#define PIN_PC31__URXD3 PINMUX_PIN(PIN_PC31, 3, 2) +#define PIN_PC31__A20 PINMUX_PIN(PIN_PC31, 6, 2) +#define PIN_PD0 96 +#define PIN_PD0__GPIO PINMUX_PIN(PIN_PD0, 0, 0) +#define PIN_PD0__LCDPCK PINMUX_PIN(PIN_PD0, 1, 2) +#define PIN_PD0__FLEXCOM4_IO4 PINMUX_PIN(PIN_PD0, 2, 1) +#define PIN_PD0__UTXD3 PINMUX_PIN(PIN_PD0, 3, 2) +#define PIN_PD0__GTSUCOMP PINMUX_PIN(PIN_PD0, 4, 2) +#define PIN_PD0__A23 PINMUX_PIN(PIN_PD0, 6, 2) +#define PIN_PD1 97 +#define PIN_PD1__GPIO PINMUX_PIN(PIN_PD1, 0, 0) +#define PIN_PD1__LCDDEN PINMUX_PIN(PIN_PD1, 1, 2) +#define PIN_PD1__GRXCK PINMUX_PIN(PIN_PD1, 4, 2) +#define PIN_PD1__A24 PINMUX_PIN(PIN_PD1, 6, 2) +#define PIN_PD2 98 +#define PIN_PD2__GPIO PINMUX_PIN(PIN_PD2, 0, 0) +#define PIN_PD2__URXD1 PINMUX_PIN(PIN_PD2, 1, 1) +#define PIN_PD2__GTXER PINMUX_PIN(PIN_PD2, 4, 2) +#define PIN_PD2__ISC_MCK PINMUX_PIN(PIN_PD2, 5, 2) +#define PIN_PD2__A25 PINMUX_PIN(PIN_PD2, 6, 2) +#define PIN_PD3 99 +#define PIN_PD3__GPIO PINMUX_PIN(PIN_PD3, 0, 0) +#define PIN_PD3__UTXD1 PINMUX_PIN(PIN_PD3, 1, 1) +#define PIN_PD3__FIQ PINMUX_PIN(PIN_PD3, 2, 2) +#define PIN_PD3__GCRS PINMUX_PIN(PIN_PD3, 4, 2) +#define PIN_PD3__ISC_D11 PINMUX_PIN(PIN_PD3, 5, 2) +#define PIN_PD3__NWAIT PINMUX_PIN(PIN_PD3, 6, 2) +#define PIN_PD4 100 +#define PIN_PD4__GPIO PINMUX_PIN(PIN_PD4, 0, 0) +#define PIN_PD4__TWD1 PINMUX_PIN(PIN_PD4, 1, 2) +#define PIN_PD4__URXD2 PINMUX_PIN(PIN_PD4, 2, 1) +#define PIN_PD4__GCOL PINMUX_PIN(PIN_PD4, 4, 2) +#define PIN_PD4__ISC_D10 PINMUX_PIN(PIN_PD4, 5, 2) +#define PIN_PD4__NCS0 PINMUX_PIN(PIN_PD4, 6, 2) +#define PIN_PD5 101 +#define PIN_PD5__GPIO PINMUX_PIN(PIN_PD5, 0, 0) +#define PIN_PD5__TWCK1 PINMUX_PIN(PIN_PD5, 1, 2) +#define PIN_PD5__UTXD2 PINMUX_PIN(PIN_PD5, 2, 1) +#define PIN_PD5__GRX2 PINMUX_PIN(PIN_PD5, 4, 2) +#define PIN_PD5__ISC_D9 PINMUX_PIN(PIN_PD5, 5, 2) +#define PIN_PD5__NCS1 PINMUX_PIN(PIN_PD5, 6, 2) +#define PIN_PD6 102 +#define PIN_PD6__GPIO PINMUX_PIN(PIN_PD6, 0, 0) +#define PIN_PD6__TCK PINMUX_PIN(PIN_PD6, 1, 2) +#define PIN_PD6__PCK1 PINMUX_PIN(PIN_PD6, 2, 1) +#define PIN_PD6__GRX3 PINMUX_PIN(PIN_PD6, 4, 2) +#define PIN_PD6__ISC_D8 PINMUX_PIN(PIN_PD6, 5, 2) +#define PIN_PD6__NCS2 PINMUX_PIN(PIN_PD6, 6, 2) +#define PIN_PD7 103 +#define PIN_PD7__GPIO PINMUX_PIN(PIN_PD7, 0, 0) +#define PIN_PD7__TDI PINMUX_PIN(PIN_PD7, 1, 2) +#define PIN_PD7__UTMI_RXVAL PINMUX_PIN(PIN_PD7, 3, 1) +#define PIN_PD7__GTX2 PINMUX_PIN(PIN_PD7, 4, 2) +#define PIN_PD7__ISC_D0 PINMUX_PIN(PIN_PD7, 5, 2) +#define PIN_PD7__NWR1_NBS1 PINMUX_PIN(PIN_PD7, 6, 2) +#define PIN_PD8 104 +#define PIN_PD8__GPIO PINMUX_PIN(PIN_PD8, 0, 0) +#define PIN_PD8__TDO PINMUX_PIN(PIN_PD8, 1, 2) +#define PIN_PD8__UTMI_RXERR PINMUX_PIN(PIN_PD8, 3, 1) +#define PIN_PD8__GTX3 PINMUX_PIN(PIN_PD8, 4, 2) +#define PIN_PD8__ISC_D1 PINMUX_PIN(PIN_PD8, 5, 2) +#define PIN_PD8__NANDRDY PINMUX_PIN(PIN_PD8, 6, 2) +#define PIN_PD9 105 +#define PIN_PD9__GPIO PINMUX_PIN(PIN_PD9, 0, 0) +#define PIN_PD9__TMS PINMUX_PIN(PIN_PD9, 1, 2) +#define PIN_PD9__UTMI_RXACT PINMUX_PIN(PIN_PD9, 3, 1) +#define PIN_PD9__GTXCK PINMUX_PIN(PIN_PD9, 4, 2) +#define PIN_PD9__ISC_D2 PINMUX_PIN(PIN_PD9, 5, 2) +#define PIN_PD10 106 +#define PIN_PD10__GPIO PINMUX_PIN(PIN_PD10, 0, 0) +#define PIN_PD10__NTRST PINMUX_PIN(PIN_PD10, 1, 2) +#define PIN_PD10__UTMI_HDIS PINMUX_PIN(PIN_PD10, 3, 1) +#define PIN_PD10__GTXEN PINMUX_PIN(PIN_PD10, 4, 2) +#define PIN_PD10__ISC_D3 PINMUX_PIN(PIN_PD10, 5, 2) +#define PIN_PD11 107 +#define PIN_PD11__GPIO PINMUX_PIN(PIN_PD11, 0, 0) +#define PIN_PD11__TIOA1 PINMUX_PIN(PIN_PD11, 1, 3) +#define PIN_PD11__PCK2 PINMUX_PIN(PIN_PD11, 2, 2) +#define PIN_PD11__UTMI_LS0 PINMUX_PIN(PIN_PD11, 3, 1) +#define PIN_PD11__GRXDV PINMUX_PIN(PIN_PD11, 4, 2) +#define PIN_PD11__ISC_D4 PINMUX_PIN(PIN_PD11, 5, 2) +#define PIN_PD11__ISC_MCK PINMUX_PIN(PIN_PD11, 7, 4) +#define PIN_PD12 108 +#define PIN_PD12__GPIO PINMUX_PIN(PIN_PD12, 0, 0) +#define PIN_PD12__TIOB1 PINMUX_PIN(PIN_PD12, 1, 3) +#define PIN_PD12__FLEXCOM4_IO0 PINMUX_PIN(PIN_PD12, 2, 2) +#define PIN_PD12__UTMI_LS1 PINMUX_PIN(PIN_PD12, 3, 1) +#define PIN_PD12__GRXER PINMUX_PIN(PIN_PD12, 4, 2) +#define PIN_PD12__ISC_D5 PINMUX_PIN(PIN_PD12, 5, 2) +#define PIN_PD12__ISC_D4 PINMUX_PIN(PIN_PD12, 6, 4) +#define PIN_PD13 109 +#define PIN_PD13__GPIO PINMUX_PIN(PIN_PD13, 0, 0) +#define PIN_PD13__TCLK1 PINMUX_PIN(PIN_PD13, 1, 3) +#define PIN_PD13__FLEXCOM4_IO1 PINMUX_PIN(PIN_PD13, 2, 2) +#define PIN_PD13__UTMI_CDRPCSEL0 PINMUX_PIN(PIN_PD13, 3, 1) +#define PIN_PD13__GRX0 PINMUX_PIN(PIN_PD13, 4, 2) +#define PIN_PD13__ISC_D6 PINMUX_PIN(PIN_PD13, 5, 2) +#define PIN_PD13__ISC_D5 PINMUX_PIN(PIN_PD13, 6, 4) +#define PIN_PD14 110 +#define PIN_PD14__GPIO PINMUX_PIN(PIN_PD14, 0, 0) +#define PIN_PD14__TCK PINMUX_PIN(PIN_PD14, 1, 1) +#define PIN_PD14__FLEXCOM4_IO2 PINMUX_PIN(PIN_PD14, 2, 2) +#define PIN_PD14__UTMI_CDRPCSEL1 PINMUX_PIN(PIN_PD14, 3, 1) +#define PIN_PD14__GRX1 PINMUX_PIN(PIN_PD14, 4, 2) +#define PIN_PD14__ISC_D7 PINMUX_PIN(PIN_PD14, 5, 2) +#define PIN_PD14__ISC_D6 PINMUX_PIN(PIN_PD14, 6, 4) +#define PIN_PD15 111 +#define PIN_PD15__GPIO PINMUX_PIN(PIN_PD15, 0, 0) +#define PIN_PD15__TDI PINMUX_PIN(PIN_PD15, 1, 1) +#define PIN_PD15__FLEXCOM4_IO3 PINMUX_PIN(PIN_PD15, 2, 2) +#define PIN_PD15__UTMI_CDRCPDIVEN PINMUX_PIN(PIN_PD15, 3, 1) +#define PIN_PD15__GTX0 PINMUX_PIN(PIN_PD15, 4, 2) +#define PIN_PD15__ISC_PCK PINMUX_PIN(PIN_PD15, 5, 2) +#define PIN_PD15__ISC_D7 PINMUX_PIN(PIN_PD15, 6, 4) +#define PIN_PD16 112 +#define PIN_PD16__GPIO PINMUX_PIN(PIN_PD16, 0, 0) +#define PIN_PD16__TDO PINMUX_PIN(PIN_PD16, 1, 1) +#define PIN_PD16__FLEXCOM4_IO4 PINMUX_PIN(PIN_PD16, 2, 2) +#define PIN_PD16__UTMI_CDRBISTEN PINMUX_PIN(PIN_PD16, 3, 1) +#define PIN_PD16__GTX1 PINMUX_PIN(PIN_PD16, 4, 2) +#define PIN_PD16__ISC_VSYNC PINMUX_PIN(PIN_PD16, 5, 2) +#define PIN_PD16__ISC_D8 PINMUX_PIN(PIN_PD16, 6, 4) +#define PIN_PD17 113 +#define PIN_PD17__GPIO PINMUX_PIN(PIN_PD17, 0, 0) +#define PIN_PD17__TMS PINMUX_PIN(PIN_PD17, 1, 1) +#define PIN_PD17__UTMI_CDRCPSELDIV PINMUX_PIN(PIN_PD17, 3, 1) +#define PIN_PD17__GMDC PINMUX_PIN(PIN_PD17, 4, 2) +#define PIN_PD17__ISC_HSYNC PINMUX_PIN(PIN_PD17, 5, 2) +#define PIN_PD17__ISC_D9 PINMUX_PIN(PIN_PD17, 6, 4) +#define PIN_PD18 114 +#define PIN_PD18__GPIO PINMUX_PIN(PIN_PD18, 0, 0) +#define PIN_PD18__NTRST PINMUX_PIN(PIN_PD18, 1, 1) +#define PIN_PD18__GMDIO PINMUX_PIN(PIN_PD18, 4, 2) +#define PIN_PD18__ISC_FIELD PINMUX_PIN(PIN_PD18, 5, 2) +#define PIN_PD18__ISC_D10 PINMUX_PIN(PIN_PD18, 6, 4) +#define PIN_PD19 115 +#define PIN_PD19__GPIO PINMUX_PIN(PIN_PD19, 0, 0) +#define PIN_PD19__PCK0 PINMUX_PIN(PIN_PD19, 1, 1) +#define PIN_PD19__TWD1 PINMUX_PIN(PIN_PD19, 2, 3) +#define PIN_PD19__URXD2 PINMUX_PIN(PIN_PD19, 3, 3) +#define PIN_PD19__I2SC0_CK PINMUX_PIN(PIN_PD19, 5, 2) +#define PIN_PD19__ISC_D11 PINMUX_PIN(PIN_PD19, 6, 4) +#define PIN_PD20 116 +#define PIN_PD20__GPIO PINMUX_PIN(PIN_PD20, 0, 0) +#define PIN_PD20__TIOA2 PINMUX_PIN(PIN_PD20, 1, 3) +#define PIN_PD20__TWCK1 PINMUX_PIN(PIN_PD20, 2, 3) +#define PIN_PD20__UTXD2 PINMUX_PIN(PIN_PD20, 3, 3) +#define PIN_PD20__I2SC0_MCK PINMUX_PIN(PIN_PD20, 5, 2) +#define PIN_PD20__ISC_PCK PINMUX_PIN(PIN_PD20, 6, 4) +#define PIN_PD21 117 +#define PIN_PD21__GPIO PINMUX_PIN(PIN_PD21, 0, 0) +#define PIN_PD21__TIOB2 PINMUX_PIN(PIN_PD21, 1, 3) +#define PIN_PD21__TWD0 PINMUX_PIN(PIN_PD21, 2, 4) +#define PIN_PD21__FLEXCOM4_IO0 PINMUX_PIN(PIN_PD21, 3, 3) +#define PIN_PD21__I2SC0_WS PINMUX_PIN(PIN_PD21, 5, 2) +#define PIN_PD21__ISC_VSYNC PINMUX_PIN(PIN_PD21, 6, 4) +#define PIN_PD22 118 +#define PIN_PD22__GPIO PINMUX_PIN(PIN_PD22, 0, 0) +#define PIN_PD22__TCLK2 PINMUX_PIN(PIN_PD22, 1, 3) +#define PIN_PD22__TWCK0 PINMUX_PIN(PIN_PD22, 2, 4) +#define PIN_PD22__FLEXCOM4_IO1 PINMUX_PIN(PIN_PD22, 3, 3) +#define PIN_PD22__I2SC0_DI0 PINMUX_PIN(PIN_PD22, 5, 2) +#define PIN_PD22__ISC_HSYNC PINMUX_PIN(PIN_PD22, 6, 4) +#define PIN_PD23 119 +#define PIN_PD23__GPIO PINMUX_PIN(PIN_PD23, 0, 0) +#define PIN_PD23__URXD2 PINMUX_PIN(PIN_PD23, 1, 2) +#define PIN_PD23__FLEXCOM4_IO2 PINMUX_PIN(PIN_PD23, 3, 3) +#define PIN_PD23__I2SC0_DO0 PINMUX_PIN(PIN_PD23, 5, 2) +#define PIN_PD23__ISC_FIELD PINMUX_PIN(PIN_PD23, 6, 4) +#define PIN_PD24 120 +#define PIN_PD24__GPIO PINMUX_PIN(PIN_PD24, 0, 0) +#define PIN_PD24__UTXD2 PINMUX_PIN(PIN_PD23, 1, 2) +#define PIN_PD24__FLEXCOM4_IO3 PINMUX_PIN(PIN_PD23, 3, 3) +#define PIN_PD25 121 +#define PIN_PD25__GPIO PINMUX_PIN(PIN_PD25, 0, 0) +#define PIN_PD25__SPI1_SPCK PINMUX_PIN(PIN_PD25, 1, 3) +#define PIN_PD25__FLEXCOM4_IO4 PINMUX_PIN(PIN_PD25, 3, 3) +#define PIN_PD26 122 +#define PIN_PD26__GPIO PINMUX_PIN(PIN_PD26, 0, 0) +#define PIN_PD26__SPI1_MOSI PINMUX_PIN(PIN_PD26, 1, 3) +#define PIN_PD26__FLEXCOM2_IO0 PINMUX_PIN(PIN_PD26, 3, 2) +#define PIN_PD27 123 +#define PIN_PD27__GPIO PINMUX_PIN(PIN_PD27, 0, 0) +#define PIN_PD27__SPI1_MISO PINMUX_PIN(PIN_PD27, 1, 3) +#define PIN_PD27__TCK PINMUX_PIN(PIN_PD27, 2, 3) +#define PIN_PD27__FLEXCOM2_IO1 PINMUX_PIN(PIN_PD27, 3, 2) +#define PIN_PD28 124 +#define PIN_PD28__GPIO PINMUX_PIN(PIN_PD28, 0, 0) +#define PIN_PD28__SPI1_NPCS0 PINMUX_PIN(PIN_PD28, 1, 3) +#define PIN_PD28__TCI PINMUX_PIN(PIN_PD28, 2, 3) +#define PIN_PD28__FLEXCOM2_IO2 PINMUX_PIN(PIN_PD28, 3, 2) +#define PIN_PD29 125 +#define PIN_PD29__GPIO PINMUX_PIN(PIN_PD29, 0, 0) +#define PIN_PD29__SPI1_NPCS1 PINMUX_PIN(PIN_PD29, 1, 3) +#define PIN_PD29__TDO PINMUX_PIN(PIN_PD29, 2, 3) +#define PIN_PD29__FLEXCOM2_IO3 PINMUX_PIN(PIN_PD29, 3, 2) +#define PIN_PD29__TIOA3 PINMUX_PIN(PIN_PD29, 4, 3) +#define PIN_PD29__TWD0 PINMUX_PIN(PIN_PD29, 5, 3) +#define PIN_PD30 126 +#define PIN_PD30__GPIO PINMUX_PIN(PIN_PD30, 0, 0) +#define PIN_PD30__SPI1_NPCS2 PINMUX_PIN(PIN_PD30, 1, 3) +#define PIN_PD30__TMS PINMUX_PIN(PIN_PD30, 2, 3) +#define PIN_PD30__FLEXCOM2_IO4 PINMUX_PIN(PIN_PD30, 3, 2) +#define PIN_PD30__TIOB3 PINMUX_PIN(PIN_PD30, 4, 3) +#define PIN_PD30__TWCK0 PINMUX_PIN(PIN_PD30, 5, 3) +#define PIN_PD31 127 +#define PIN_PD31__GPIO PINMUX_PIN(PIN_PD31, 0, 0) +#define PIN_PD31__ADTRG PINMUX_PIN(PIN_PD31, 1, 1) +#define PIN_PD31__NTRST PINMUX_PIN(PIN_PD31, 2, 3) +#define PIN_PD31__IRQ PINMUX_PIN(PIN_PD31, 3, 4) +#define PIN_PD31__TCLK3 PINMUX_PIN(PIN_PD31, 4, 3) +#define PIN_PD31__PCK0 PINMUX_PIN(PIN_PD31, 5, 2) diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index cc05cde0f9a4..4dfca8fc49b3 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -263,6 +263,24 @@ cache-level = <2>; }; + sdmmc0: sdio-host@a0000000 { + compatible = "atmel,sama5d2-sdhci"; + reg = <0xa0000000 0x300>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>; + clock-names = "hclock", "multclk", "baseclk"; + status = "disabled"; + }; + + sdmmc1: sdio-host@b0000000 { + compatible = "atmel,sama5d2-sdhci"; + reg = <0xb0000000 0x300>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>; + clock-names = "hclock", "multclk", "baseclk"; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -286,7 +304,7 @@ }; pmc: pmc@f0014000 { - compatible = "atmel,sama5d2-pmc"; + compatible = "atmel,sama5d2-pmc", "syscon"; reg = <0xf0014000 0x160>; interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; @@ -619,6 +637,18 @@ atmel,clk-output-range = <0 83000000>; }; + i2s0_clk: i2s0_clk { + #clock-cells = <0>; + reg = <54>; + atmel,clk-output-range = <0 83000000>; + }; + + i2s1_clk: i2s1_clk { + #clock-cells = <0>; + reg = <55>; + atmel,clk-output-range = <0 83000000>; + }; + classd_clk: classd_clk { #clock-cells = <0>; reg = <59>; @@ -697,6 +727,52 @@ reg = <53>; }; }; + + gck { + compatible = "atmel,sama5d2-clk-generated"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + sdmmc0_gclk: sdmmc0_gclk { + #clock-cells = <0>; + reg = <31>; + }; + + sdmmc1_gclk: sdmmc1_gclk { + #clock-cells = <0>; + reg = <32>; + }; + + tcb0_gclk: tcb0_gclk { + #clock-cells = <0>; + reg = <35>; + atmel,clk-output-range = <0 83000000>; + }; + + tcb1_gclk: tcb1_gclk { + #clock-cells = <0>; + reg = <36>; + atmel,clk-output-range = <0 83000000>; + }; + + pwm_gclk: pwm_gclk { + #clock-cells = <0>; + reg = <38>; + atmel,clk-output-range = <0 83000000>; + }; + + i2s0_gclk: i2s0_gclk { + #clock-cells = <0>; + reg = <54>; + }; + + i2s1_gclk: i2s1_gclk { + #clock-cells = <0>; + reg = <55>; + }; + }; }; sha@f0028000 { @@ -709,7 +785,7 @@ dma-names = "tx"; clocks = <&sha_clk>; clock-names = "sha_clk"; - status = "disabled"; + status = "okay"; }; aes@f002c000 { @@ -725,7 +801,7 @@ dma-names = "tx", "rx"; clocks = <&aes_clk>; clock-names = "aes_clk"; - status = "disabled"; + status = "okay"; }; spi0: spi@f8000000 { @@ -820,6 +896,32 @@ status = "disabled"; }; + flx0: flexcom@f8034000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8034000 0x200>; + clocks = <&flx0_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8034000 0x800>; + status = "disabled"; + }; + + flx1: flexcom@f8038000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8038000 0x200>; + clocks = <&flx1_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8038000 0x800>; + status = "disabled"; + }; + + rstc@f8048000 { + compatible = "atmel,sama5d3-rstc"; + reg = <0xf8048000 0x10>; + clocks = <&clk32k>; + }; + pit: timer@f8048030 { compatible = "atmel,at91sam9260-pit"; reg = <0xf8048030 0x10>; @@ -897,6 +999,36 @@ status = "disabled"; }; + flx2: flexcom@fc010000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xfc010000 0x200>; + clocks = <&flx2_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xfc010000 0x800>; + status = "disabled"; + }; + + flx3: flexcom@fc014000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xfc014000 0x200>; + clocks = <&flx3_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xfc014000 0x800>; + status = "disabled"; + }; + + flx4: flexcom@fc018000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xfc018000 0x200>; + clocks = <&flx4_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xfc018000 0x800>; + status = "disabled"; + }; + aic: interrupt-controller@fc020000 { #interrupt-cells = <3>; compatible = "atmel,sama5d2-aic"; @@ -935,6 +1067,22 @@ #gpio-cells = <2>; clocks = <&pioA_clk>; }; + + tdes@fc044000 { + compatible = "atmel,at91sam9g46-tdes"; + reg = <0xfc044000 0x100>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(28))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(29))>; + dma-names = "tx", "rx"; + clocks = <&tdes_clk>; + clock-names = "tdes_clk"; + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 7fa276515f11..a53279160f98 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -75,7 +75,7 @@ adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <20000000>; + clock-frequency = <1000000>; }; }; @@ -322,6 +322,7 @@ atmel,adc-use-external-triggers; atmel,adc-vref = <3000>; atmel,adc-res = <10 12>; + atmel,adc-sample-hold-time = <11>; atmel,adc-res-names = "lowres", "highres"; status = "disabled"; @@ -906,7 +907,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,sama5d3-pmc"; + compatible = "atmel,sama5d3-pmc", "syscon"; reg = <0xfffffc00 0x120>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi index 026b252f09b3..e21099a1aef9 100644 --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi @@ -24,9 +24,9 @@ }; pinctrl_mmc2_dat1_3: mmc2_dat1_3 { atmel,pins = - <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ - AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ - AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ + <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ }; }; }; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 83bee7a3a617..89010422812d 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -87,6 +87,8 @@ isi_0: endpoint { remote-endpoint = <&ov2640_0>; bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; }; }; }; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 8d1de29e8da1..15bbaf690047 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -386,7 +386,7 @@ }; pmc: pmc@f0018000 { - compatible = "atmel,sama5d3-pmc"; + compatible = "atmel,sama5d3-pmc", "syscon"; reg = <0xf0018000 0x120>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; @@ -939,11 +939,11 @@ reg = <0xf8018000 0x4000>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma1 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(4)>, + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(4))>, <&dma1 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(5)>; + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(5))>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -1189,6 +1189,19 @@ clock-names = "t0_clk", "slow_clk"; }; + macb1: ethernet@fc028000 { + compatible = "atmel,sama5d4-gem"; + reg = <0xfc028000 0x100>; + interrupts = <55 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb1_rmii>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&macb1_clk>, <&macb1_clk>; + clock-names = "hclk", "pclk"; + status = "disabled"; + }; + adc0: adc@fc034000 { compatible = "atmel,at91sam9x5-adc"; reg = <0xfc034000 0x100>; @@ -1238,7 +1251,7 @@ dma-names = "tx", "rx"; clocks = <&aes_clk>; clock-names = "aes_clk"; - status = "disabled"; + status = "okay"; }; tdes@fc04c000 { @@ -1252,7 +1265,7 @@ dma-names = "tx", "rx"; clocks = <&tdes_clk>; clock-names = "tdes_clk"; - status = "disabled"; + status = "okay"; }; sha@fc050000 { @@ -1264,7 +1277,7 @@ dma-names = "tx"; clocks = <&sha_clk>; clock-names = "sha_clk"; - status = "disabled"; + status = "okay"; }; rstc@fc068600 { @@ -1350,7 +1363,7 @@ 0xffffffff 0x3ffcfe7c 0x1c010101 /* pioA */ 0x7fffffff 0xfffccc3a 0x3f00cc3a /* pioB */ 0xffffffff 0x3ff83fff 0xff00ffff /* pioC */ - 0x00000000 0x00000000 0x00000000 /* pioD */ + 0x0003ff00 0x8002a800 0x00000000 /* pioD */ 0xffffffff 0x7fffffff 0x76fff1bf /* pioE */ >; @@ -1396,7 +1409,6 @@ interrupt-controller; #interrupt-cells = <2>; clocks = <&pioD_clk>; - status = "disabled"; }; pioE: gpio@fc06d000 { @@ -1636,6 +1648,23 @@ }; }; + macb1 { + pinctrl_macb1_rmii: macb1_rmii-0 { + atmel,pins = + <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TX0 */ + AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TX1 */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RX0 */ + AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RX1 */ + AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RXDV */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RXER */ + AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TXEN */ + AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TXCK */ + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_MDC */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_MDIO */ + >; + }; + }; + mmc0 { pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { atmel,pins = diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 24b4cd24dceb..7fc5602810ad 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -206,7 +206,7 @@ }; accelerometer@1d { - compatible = "adi,adxl34x"; + compatible = "adi,adxl345"; reg = <0x1d>; interrupt-parent = <&irqpin3>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 314e589cfa00..39c470e291f9 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -513,6 +513,13 @@ }; }; + fpgamgr0: fpgamgr@ff706000 { + compatible = "altr,socfpga-fpga-mgr"; + reg = <0xff706000 0x1000 + 0xffb90000 0x1000>; + interrupts = <0 175 4>; + }; + gmac0: ethernet@ff700000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; altr,sysmgr-syscon = <&sysmgr 0x60 0>; @@ -549,46 +556,6 @@ status = "disabled"; }; - i2c0: i2c@ffc04000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0xffc04000 0x1000>; - clocks = <&l4_sp_clk>; - interrupts = <0 158 0x4>; - status = "disabled"; - }; - - i2c1: i2c@ffc05000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0xffc05000 0x1000>; - clocks = <&l4_sp_clk>; - interrupts = <0 159 0x4>; - status = "disabled"; - }; - - i2c2: i2c@ffc06000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0xffc06000 0x1000>; - clocks = <&l4_sp_clk>; - interrupts = <0 160 0x4>; - status = "disabled"; - }; - - i2c3: i2c@ffc07000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0xffc07000 0x1000>; - clocks = <&l4_sp_clk>; - interrupts = <0 161 0x4>; - status = "disabled"; - }; - gpio0: gpio@ff708000 { #address-cells = <1>; #size-cells = <0>; @@ -649,15 +616,44 @@ }; }; - sdr: sdr@ffc25000 { - compatible = "syscon"; - reg = <0xffc25000 0x1000>; + i2c0: i2c@ffc04000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc04000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 158 0x4>; + status = "disabled"; }; - sdramedac { - compatible = "altr,sdram-edac"; - altr,sdr-syscon = <&sdr>; - interrupts = <0 39 4>; + i2c1: i2c@ffc05000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc05000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 159 0x4>; + status = "disabled"; + }; + + i2c2: i2c@ffc06000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc06000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 160 0x4>; + status = "disabled"; + }; + + i2c3: i2c@ffc07000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc07000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 161 0x4>; + status = "disabled"; }; L2: l2-cache@fffef000 { @@ -688,6 +684,29 @@ reg = <0xffff0000 0x10000>; }; + rst: rstmgr@ffd05000 { + #reset-cells = <1>; + compatible = "altr,rst-mgr"; + reg = <0xffd05000 0x1000>; + altr,modrst-offset = <0x10>; + }; + + scu: snoop-control-unit@fffec000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xfffec000 0x100>; + }; + + sdr: sdr@ffc25000 { + compatible = "syscon"; + reg = <0xffc25000 0x1000>; + }; + + sdramedac { + compatible = "altr,sdram-edac"; + altr,sdr-syscon = <&sdr>; + interrupts = <0 39 4>; + }; + spi0: spi@fff00000 { compatible = "snps,dw-apb-ssi"; #address-cells = <1>; @@ -699,11 +718,6 @@ status = "disabled"; }; - scu: snoop-control-unit@fffec000 { - compatible = "arm,cortex-a9-scu"; - reg = <0xfffec000 0x100>; - }; - spi1: spi@fff01000 { compatible = "snps,dw-apb-ssi"; #address-cells = <1>; @@ -715,6 +729,11 @@ status = "disabled"; }; + sysmgr: sysmgr@ffd08000 { + compatible = "altr,sys-mgr", "syscon"; + reg = <0xffd08000 0x4000>; + }; + /* Local timer */ timer@fffec600 { compatible = "arm,cortex-a9-twd-timer"; @@ -779,13 +798,6 @@ dma-names = "tx", "rx"; }; - rst: rstmgr@ffd05000 { - #reset-cells = <1>; - compatible = "altr,rst-mgr"; - reg = <0xffd05000 0x1000>; - altr,modrst-offset = <0x10>; - }; - usbphy0: usbphy@0 { #phy-cells = <0>; compatible = "usb-nop-xceiv"; @@ -829,10 +841,5 @@ clocks = <&osc1>; status = "disabled"; }; - - sysmgr: sysmgr@ffd08000 { - compatible = "altr,sys-mgr", "syscon"; - reg = <0xffd08000 0x4000>; - }; }; }; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 2340fcb2b535..cce9e50acf68 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -519,6 +519,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02200 0x100>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sp_clk>; status = "disabled"; }; @@ -528,6 +529,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02300 0x100>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sp_clk>; status = "disabled"; }; @@ -537,6 +539,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02400 0x100>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sp_clk>; status = "disabled"; }; @@ -546,6 +549,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02500 0x100>; interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sp_clk>; status = "disabled"; }; @@ -555,6 +559,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02600 0x100>; interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sp_clk>; status = "disabled"; }; @@ -658,6 +663,7 @@ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + clocks = <&l4_sp_clk>; status = "disabled"; }; @@ -692,6 +698,8 @@ compatible = "snps,dwc2"; reg = <0xffb40000 0xffff>; interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_clk>; + clock-names = "otg"; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index 99aa9a1c8af0..567df98f1bb5 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -70,6 +70,33 @@ status = "okay"; }; +&i2c1 { + speed-mode = <0>; + status = "okay"; + + /* + * adjust the falling times to decrease the i2c frequency to 50Khz + * because the LCD module does not work at the standard 100Khz + */ + i2c-sda-falling-time-ns = <6000>; + i2c-scl-falling-time-ns = <6000>; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + &uart1 { status = "okay"; }; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts index 6d93475be554..c8ad905d0309 100644 --- a/arch/arm/boot/dts/stih407-b2120.dts +++ b/arch/arm/boot/dts/stih407-b2120.dts @@ -25,6 +25,7 @@ aliases { ttyAS0 = &sbc_serial0; + ethernet0 = ðernet0; }; }; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 0c24fcb03577..81f81214cdf9 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -152,6 +152,19 @@ <ST_IRQ_SYSCFG_DISABLED>; }; + /* Display */ + vtg_main: sti-vtg-main@8d02800 { + compatible = "st,vtg"; + reg = <0x8d02800 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>; + }; + + vtg_aux: sti-vtg-aux@8d00200 { + compatible = "st,vtg"; + reg = <0x8d00200 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>; + }; + serial@9830000 { compatible = "st,asc"; reg = <0x9830000 0x2c>; @@ -396,6 +409,8 @@ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; status = "disabled"; }; @@ -406,6 +421,8 @@ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2_default>; status = "disabled"; }; @@ -416,6 +433,8 @@ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi3_default>; status = "disabled"; }; @@ -426,6 +445,8 @@ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi4_default>; status = "disabled"; }; @@ -437,6 +458,8 @@ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_sysin>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi10_default>; status = "disabled"; }; @@ -447,6 +470,8 @@ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_sysin>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi11_default>; status = "disabled"; }; @@ -457,6 +482,8 @@ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_sysin>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi12_default>; status = "disabled"; }; @@ -585,7 +612,6 @@ /* COMMS PWM Module */ pwm0: pwm@9810000 { compatible = "st,sti-pwm"; - status = "okay"; #pwm-cells = <2>; reg = <0x9810000 0x68>; pinctrl-names = "default"; @@ -593,12 +619,13 @@ clock-names = "pwm"; clocks = <&clk_sysin>; st,pwm-num-chan = <1>; + + status = "disabled"; }; /* SBC PWM Module */ pwm1: pwm@9510000 { compatible = "st,sti-pwm"; - status = "okay"; #pwm-cells = <2>; reg = <0x9510000 0x68>; pinctrl-names = "default"; @@ -609,6 +636,49 @@ clock-names = "pwm"; clocks = <&clk_sysin>; st,pwm-num-chan = <4>; + + status = "disabled"; + }; + + rng10: rng@08a89000 { + compatible = "st,rng"; + reg = <0x08a89000 0x1000>; + clocks = <&clk_sysin>; + status = "okay"; + }; + + rng11: rng@08a8a000 { + compatible = "st,rng"; + reg = <0x08a8a000 0x1000>; + clocks = <&clk_sysin>; + status = "okay"; + }; + + ethernet0: dwmac@9630000 { + device_type = "network"; + status = "disabled"; + compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710"; + reg = <0x9630000 0x8000>, <0x80 0x4>; + reg-names = "stmmaceth", "sti-ethconf"; + + st,syscon = <&syscfg_sbc_reg 0x80>; + st,gmac_en; + resets = <&softreset STIH407_ETH1_SOFTRESET>; + reset-names = "stmmaceth"; + + interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>, + <GIC_SPI 99 IRQ_TYPE_NONE>; + interrupt-names = "macirq", "eth_wake_irq"; + + /* DMA Bus Mode */ + snps,pbl = <8>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1>; + + clock-names = "stmmaceth", "sti-ethclk"; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>, + <&clk_s_c0_flexgen CLK_ETH_PHY>; }; rng10: rng@08a89000 { diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index 1683debd0854..a538ae52d32b 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -53,7 +53,7 @@ reg = <0x0961f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0x09610000 0x6000>; pio0: gpio@09610000 { @@ -107,12 +107,38 @@ st,retime-pin-mask = <0x3f>; }; + cec0 { + pinctrl_cec0_default: cec0-default { + st,pins { + hdmi_cec = <&pio2 4 ALT1 BIDIR>; + }; + }; + }; + rc { pinctrl_ir: ir0 { st,pins { ir = <&pio4 0 ALT2 IN>; }; }; + + pinctrl_uhf: uhf0 { + st,pins { + ir = <&pio4 1 ALT2 IN>; + }; + }; + + pinctrl_tx: tx0 { + st,pins { + tx = <&pio4 2 ALT2 OUT>; + }; + }; + + pinctrl_tx_od: tx_od0 { + st,pins { + tx_od = <&pio4 3 ALT2 OUT>; + }; + }; }; /* SBC_ASC0 - UART10 */ @@ -190,9 +216,9 @@ rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>; rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>; rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>; - rxclk = <&pio2 2 ALT1 IN NICLK 500 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>; - phyclk = <&pio2 3 ALT4 OUT NICLK 1750 CLK_B>; + phyclk = <&pio2 3 ALT4 OUT NICLK 1250 CLK_B>; }; }; @@ -230,6 +256,33 @@ phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>; }; }; + + pinctrl_rmii1: rmii1-0 { + st,pins { + txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + mdio = <&pio1 0 ALT1 OUT BYPASS 0>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + mdint = <&pio1 3 ALT1 IN BYPASS 0>; + rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_B>; + rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_B>; + rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_B>; + rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + }; + }; + + pinctrl_rmii1_phyclk: rmii1_phyclk { + st,pins { + phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>; + }; + }; + + pinctrl_rmii1_phyclk_ext: rmii1_phyclk_ext { + st,pins { + phyclk = <&pio2 3 ALT2 IN NICLK 0 CLK_A>; + }; + }; }; pwm1 { @@ -254,6 +307,57 @@ }; }; }; + + spi10 { + pinctrl_spi10_default: spi10-4w-alt1-0 { + st,pins { + mtsr = <&pio4 6 ALT1 OUT>; + mrst = <&pio4 7 ALT1 IN>; + scl = <&pio4 5 ALT1 OUT>; + }; + }; + + pinctrl_spi10_3w_alt1_0: spi10-3w-alt1-0 { + st,pins { + mtsr = <&pio4 6 ALT1 BIDIR_PU>; + scl = <&pio4 5 ALT1 OUT>; + }; + }; + }; + + spi11 { + pinctrl_spi11_default: spi11-4w-alt2-0 { + st,pins { + mtsr = <&pio3 1 ALT2 OUT>; + mrst = <&pio3 0 ALT2 IN>; + scl = <&pio3 2 ALT2 OUT>; + }; + }; + + pinctrl_spi11_3w_alt2_0: spi11-3w-alt2-0 { + st,pins { + mtsr = <&pio3 1 ALT2 BIDIR_PU>; + scl = <&pio3 2 ALT2 OUT>; + }; + }; + }; + + spi12 { + pinctrl_spi12_default: spi12-4w-alt2-0 { + st,pins { + mtsr = <&pio3 6 ALT2 OUT>; + mrst = <&pio3 4 ALT2 IN>; + scl = <&pio3 7 ALT2 OUT>; + }; + }; + + pinctrl_spi12_3w_alt2_0: spi12-3w-alt2-0 { + st,pins { + mtsr = <&pio3 6 ALT2 BIDIR_PU>; + scl = <&pio3 7 ALT2 OUT>; + }; + }; + }; }; pin-controller-front0 { @@ -264,7 +368,7 @@ reg = <0x0920f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0x09200000 0x10000>; pio10: pio@09200000 { @@ -422,20 +526,180 @@ }; i2c3 { - pinctrl_i2c3_default: i2c3-default { + pinctrl_i2c3_default: i2c3-alt1-0 { st,pins { sda = <&pio18 6 ALT1 BIDIR>; scl = <&pio18 5 ALT1 BIDIR>; }; }; + pinctrl_i2c3_alt1_1: i2c3-alt1-1 { + st,pins { + sda = <&pio17 7 ALT1 BIDIR>; + scl = <&pio17 6 ALT1 BIDIR>; + }; + }; + pinctrl_i2c3_alt3_0: i2c3-alt3-0 { + st,pins { + sda = <&pio13 6 ALT3 BIDIR>; + scl = <&pio13 5 ALT3 BIDIR>; + }; + }; }; spi0 { - pinctrl_spi0_default: spi0-default { + pinctrl_spi0_default: spi0-4w-alt2-0 { + st,pins { + mtsr = <&pio10 6 ALT2 OUT>; + mrst = <&pio10 7 ALT2 IN>; + scl = <&pio10 5 ALT2 OUT>; + }; + }; + + pinctrl_spi0_3w_alt2_0: spi0-3w-alt2-0 { + st,pins { + mtsr = <&pio10 6 ALT2 BIDIR_PU>; + scl = <&pio10 5 ALT2 OUT>; + }; + }; + + pinctrl_spi0_4w_alt1_0: spi0-4w-alt1-0 { + st,pins { + mtsr = <&pio19 7 ALT1 OUT>; + mrst = <&pio19 5 ALT1 IN>; + scl = <&pio19 6 ALT1 OUT>; + }; + }; + + pinctrl_spi0_3w_alt1_0: spi0-3w-alt1-0 { + st,pins { + mtsr = <&pio19 7 ALT1 BIDIR_PU>; + scl = <&pio19 6 ALT1 OUT>; + }; + }; + }; + + spi1 { + pinctrl_spi1_default: spi1-4w-alt2-0 { + st,pins { + mtsr = <&pio11 1 ALT2 OUT>; + mrst = <&pio11 2 ALT2 IN>; + scl = <&pio11 0 ALT2 OUT>; + }; + }; + + pinctrl_spi1_3w_alt2_0: spi1-3w-alt2-0 { + st,pins { + mtsr = <&pio11 1 ALT2 BIDIR_PU>; + scl = <&pio11 0 ALT2 OUT>; + }; + }; + + pinctrl_spi1_4w_alt1_0: spi1-4w-alt1-0 { st,pins { - mtsr = <&pio12 6 ALT2 BIDIR>; - mrst = <&pio12 7 ALT2 BIDIR>; - scl = <&pio12 5 ALT2 BIDIR>; + mtsr = <&pio14 3 ALT1 OUT>; + mrst = <&pio14 4 ALT1 IN>; + scl = <&pio14 2 ALT1 OUT>; + }; + }; + + pinctrl_spi1_3w_alt1_0: spi1-3w-alt1-0 { + st,pins { + mtsr = <&pio14 3 ALT1 BIDIR_PU>; + scl = <&pio14 2 ALT1 OUT>; + }; + }; + }; + + spi2 { + pinctrl_spi2_default: spi2-4w-alt2-0 { + st,pins { + mtsr = <&pio12 6 ALT2 OUT>; + mrst = <&pio12 7 ALT2 IN>; + scl = <&pio12 5 ALT2 OUT>; + }; + }; + + pinctrl_spi2_3w_alt2_0: spi2-3w-alt2-0 { + st,pins { + mtsr = <&pio12 6 ALT2 BIDIR_PU>; + scl = <&pio12 5 ALT2 OUT>; + }; + }; + + pinctrl_spi2_4w_alt1_0: spi2-4w-alt1-0 { + st,pins { + mtsr = <&pio14 6 ALT1 OUT>; + mrst = <&pio14 7 ALT1 IN>; + scl = <&pio14 5 ALT1 OUT>; + }; + }; + + pinctrl_spi2_3w_alt1_0: spi2-3w-alt1-0 { + st,pins { + mtsr = <&pio14 6 ALT1 BIDIR_PU>; + scl = <&pio14 5 ALT1 OUT>; + }; + }; + + pinctrl_spi2_4w_alt2_1: spi2-4w-alt2-1 { + st,pins { + mtsr = <&pio15 6 ALT2 OUT>; + mrst = <&pio15 7 ALT2 IN>; + scl = <&pio15 5 ALT2 OUT>; + }; + }; + + pinctrl_spi2_3w_alt2_1: spi2-3w-alt2-1 { + st,pins { + mtsr = <&pio15 6 ALT2 BIDIR_PU>; + scl = <&pio15 5 ALT2 OUT>; + }; + }; + }; + + spi3 { + pinctrl_spi3_default: spi3-4w-alt3-0 { + st,pins { + mtsr = <&pio13 6 ALT3 OUT>; + mrst = <&pio13 7 ALT3 IN>; + scl = <&pio13 5 ALT3 OUT>; + }; + }; + + pinctrl_spi3_3w_alt3_0: spi3-3w-alt3-0 { + st,pins { + mtsr = <&pio13 6 ALT3 BIDIR_PU>; + scl = <&pio13 5 ALT3 OUT>; + }; + }; + + pinctrl_spi3_4w_alt1_0: spi3-4w-alt1-0 { + st,pins { + mtsr = <&pio17 7 ALT1 OUT>; + mrst = <&pio17 5 ALT1 IN>; + scl = <&pio17 6 ALT1 OUT>; + }; + }; + + pinctrl_spi3_3w_alt1_0: spi3-3w-alt1-0 { + st,pins { + mtsr = <&pio17 7 ALT1 BIDIR_PU>; + scl = <&pio17 6 ALT1 OUT>; + }; + }; + + pinctrl_spi3_4w_alt1_1: spi3-4w-alt1-1 { + st,pins { + mtsr = <&pio18 6 ALT1 OUT>; + mrst = <&pio18 7 ALT1 IN>; + scl = <&pio18 5 ALT1 OUT>; + }; + }; + + pinctrl_spi3_3w_alt1_1: spi3-3w-alt1-1 { + st,pins { + mtsr = <&pio18 6 ALT1 BIDIR_PU>; + scl = <&pio18 5 ALT1 OUT>; }; }; }; @@ -627,6 +891,18 @@ }; }; }; + + systrace { + pinctrl_systrace_default: systrace-default { + st,pins { + trc_data0 = <&pio11 3 ALT5 OUT>; + trc_data1 = <&pio11 4 ALT5 OUT>; + trc_data2 = <&pio11 5 ALT5 OUT>; + trc_data3 = <&pio11 6 ALT5 OUT>; + trc_clk = <&pio11 7 ALT5 OUT>; + }; + }; + }; }; pin-controller-front1 { @@ -637,7 +913,7 @@ reg = <0x0921f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0x09210000 0x10000>; tsin4 { @@ -670,7 +946,7 @@ reg = <0x0922f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0x09220000 0x6000>; pio30: gpio@09220000 { @@ -758,6 +1034,47 @@ }; }; }; + + spi4 { + pinctrl_spi4_default: spi4-4w-alt1-0 { + st,pins { + mtsr = <&pio30 1 ALT1 OUT>; + mrst = <&pio30 2 ALT1 IN>; + scl = <&pio30 0 ALT1 OUT>; + }; + }; + + pinctrl_spi4_3w_alt1_0: spi4-3w-alt1-0 { + st,pins { + mtsr = <&pio30 1 ALT1 BIDIR_PU>; + scl = <&pio30 0 ALT1 OUT>; + }; + }; + + pinctrl_spi4_4w_alt3_0: spi4-4w-alt3-0 { + st,pins { + mtsr = <&pio34 1 ALT3 OUT>; + mrst = <&pio34 2 ALT3 IN>; + scl = <&pio34 0 ALT3 OUT>; + }; + }; + + pinctrl_spi4_3w_alt3_0: spi4-3w-alt3-0 { + st,pins { + mtsr = <&pio34 1 ALT3 BIDIR_PU>; + scl = <&pio34 0 ALT3 OUT>; + }; + }; + }; + + serial3 { + pinctrl_serial3: serial3-0 { + st,pins { + tx = <&pio31 3 ALT1 OUT>; + rx = <&pio31 4 ALT1 IN>; + }; + }; + }; }; pin-controller-flash { @@ -811,6 +1128,57 @@ emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>; }; }; + pinctrl_sd0: sd0-0 { + st,pins { + sd_clk = <&pio40 6 ALT1 BIDIR>; + sd_cmd = <&pio40 7 ALT1 BIDIR_PU>; + sd_dat0 = <&pio41 0 ALT1 BIDIR_PU>; + sd_dat1 = <&pio41 1 ALT1 BIDIR_PU>; + sd_dat2 = <&pio41 2 ALT1 BIDIR_PU>; + sd_dat3 = <&pio41 3 ALT1 BIDIR_PU>; + sd_led = <&pio42 0 ALT2 OUT>; + sd_pwren = <&pio42 2 ALT2 OUT>; + sd_vsel = <&pio42 3 ALT2 OUT>; + sd_cd = <&pio42 4 ALT2 IN>; + sd_wp = <&pio42 5 ALT2 IN>; + }; + }; + }; + + fsm { + pinctrl_fsm: fsm { + st,pins { + spi-fsm-clk = <&pio40 1 ALT1 OUT>; + spi-fsm-cs = <&pio40 0 ALT1 OUT>; + spi-fsm-mosi = <&pio40 2 ALT1 OUT>; + spi-fsm-miso = <&pio40 3 ALT1 IN>; + spi-fsm-hol = <&pio40 5 ALT1 OUT>; + spi-fsm-wp = <&pio40 4 ALT1 OUT>; + }; + }; + }; + + nand { + pinctrl_nand: nand { + st,pins { + nand_cs1 = <&pio40 6 ALT3 OUT>; + nand_cs0 = <&pio40 7 ALT3 OUT>; + nand_d0 = <&pio41 0 ALT3 BIDIR>; + nand_d1 = <&pio41 1 ALT3 BIDIR>; + nand_d2 = <&pio41 2 ALT3 BIDIR>; + nand_d3 = <&pio41 3 ALT3 BIDIR>; + nand_d4 = <&pio41 4 ALT3 BIDIR>; + nand_d5 = <&pio41 5 ALT3 BIDIR>; + nand_d6 = <&pio41 6 ALT3 BIDIR>; + nand_d7 = <&pio41 7 ALT3 BIDIR>; + nand_we = <&pio42 0 ALT3 OUT>; + nand_dqs = <&pio42 1 ALT3 OUT>; + nand_ale = <&pio42 2 ALT3 OUT>; + nand_cle = <&pio42 3 ALT3 OUT>; + nand_rnb = <&pio42 4 ALT3 IN>; + nand_oe = <&pio42 5 ALT3 OUT>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index 6b914e4bb099..d60f0d8add26 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -10,19 +10,6 @@ #include "stih407-family.dtsi" / { soc { - /* Display */ - vtg_main: sti-vtg-main@8d02800 { - compatible = "st,vtg"; - reg = <0x8d02800 0x200>; - interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>; - }; - - vtg_aux: sti-vtg-aux@8d00200 { - compatible = "st,vtg"; - reg = <0x8d00200 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>; - }; - sti-display-subsystem { compatible = "st,sti-display-subsystem"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts index 16f02c5e33a4..118ac284fc4b 100644 --- a/arch/arm/boot/dts/stih410-b2120.dts +++ b/arch/arm/boot/dts/stih410-b2120.dts @@ -25,6 +25,7 @@ aliases { ttyAS0 = &sbc_serial0; + ethernet0 = ðernet0; }; soc { @@ -35,5 +36,29 @@ sd-uhs-sdr104; sd-uhs-ddr50; }; + + usb2_picophy1: phy2 { + status = "okay"; + }; + + usb2_picophy2: phy3 { + status = "okay"; + }; + + ohci0: usb@9a03c00 { + status = "okay"; + }; + + ehci0: usb@9a03e00 { + status = "okay"; + }; + + ohci1: usb@9a83c00 { + status = "okay"; + }; + + ehci1: usb@9a83e00 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index 8c6e61a27234..18ed1ad10d32 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -22,6 +22,8 @@ resets = <&softreset STIH407_PICOPHY_SOFTRESET>, <&picophyreset STIH407_PICOPHY0_RESET>; reset-names = "global", "port"; + + status = "disabled"; }; usb2_picophy2: phy3 { @@ -31,6 +33,8 @@ resets = <&softreset STIH407_PICOPHY_SOFTRESET>, <&picophyreset STIH407_PICOPHY1_RESET>; reset-names = "global", "port"; + + status = "disabled"; }; ohci0: usb@9a03c00 { @@ -43,6 +47,8 @@ reset-names = "power", "softreset"; phys = <&usb2_picophy1>; phy-names = "usb"; + + status = "disabled"; }; ehci0: usb@9a03e00 { @@ -57,6 +63,8 @@ reset-names = "power", "softreset"; phys = <&usb2_picophy1>; phy-names = "usb"; + + status = "disabled"; }; ohci1: usb@9a83c00 { @@ -69,6 +77,8 @@ reset-names = "power", "softreset"; phys = <&usb2_picophy2>; phy-names = "usb"; + + status = "disabled"; }; ehci1: usb@9a83e00 { @@ -83,19 +93,8 @@ reset-names = "power", "softreset"; phys = <&usb2_picophy2>; phy-names = "usb"; - }; - - /* Display */ - vtg_main: sti-vtg-main@8d02800 { - compatible = "st,vtg"; - reg = <0x8d02800 0x200>; - interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>; - }; - vtg_aux: sti-vtg-aux@8d00200 { - compatible = "st,vtg"; - reg = <0x8d00200 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>; + status = "disabled"; }; sti-display-subsystem { diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts index 82eee39ccb31..772d2bb07e5f 100644 --- a/arch/arm/boot/dts/stih418-b2199.dts +++ b/arch/arm/boot/dts/stih418-b2199.dts @@ -24,6 +24,7 @@ aliases { ttyAS0 = &sbc_serial0; + ethernet0 = ðernet0; }; soc { @@ -101,5 +102,12 @@ st_dwc3: dwc3@8f94000 { status = "okay"; }; + + ethernet0: dwmac@9630000 { + st,tx-retime-src = "clkgen"; + status = "okay"; + phy-mode = "rgmii"; + fixed-link = <0 1 1000 0 0>; + }; }; }; diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi index 148e1772465f..ae6d9978ea19 100644 --- a/arch/arm/boot/dts/stih418-clock.dtsi +++ b/arch/arm/boot/dts/stih418-clock.dtsi @@ -44,7 +44,7 @@ clockgen_a9_pll: clockgen-a9-pll { #clock-cells = <1>; - compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32"; + compatible = "st,stih418-plls-c28-a9", "st,clkgen-plls-c32"; clocks = <&clk_sysin>; diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi index 8160a75539a4..965f88160718 100644 --- a/arch/arm/boot/dts/stih418.dtsi +++ b/arch/arm/boot/dts/stih418.dtsi @@ -99,5 +99,11 @@ phys = <&usb2_picophy2>; phy-names = "usb"; }; + + mmc0: sdhci@09060000 { + assigned-clocks = <&clk_s_c0_flexgen CLK_MMC_0>; + assigned-clock-parents = <&clk_s_c0_pll1 0>; + assigned-clock-rates = <200000000>; + }; }; }; diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index f589fe487f13..ad21a4293a33 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -27,6 +27,14 @@ }; }; + pwm0: pwm@9810000 { + status = "okay"; + }; + + pwm1: pwm@9510000 { + status = "okay"; + }; + i2c@9842000 { status = "okay"; }; @@ -79,5 +87,11 @@ status = "okay"; }; + ethernet0: dwmac@9630000 { + st,tx-retime-src = "clkgen"; + status = "okay"; + phy-mode = "rgmii"; + fixed-link = <0 1 1000 0 0>; + }; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 2630d78d9e04..97570cb7f2fc 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -93,6 +93,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &ehci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index 143056872650..53660894ea95 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -78,6 +78,18 @@ }; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + &lradc { vref-supply = <®_vcc3v0>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 046a84d9719d..710e2ef516a8 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -83,6 +83,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts index 570754d8df67..3f0aeb8288cd 100644 --- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts +++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts @@ -47,6 +47,7 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Gemei G9 Tablet"; @@ -64,7 +65,7 @@ /* * TODO: * 2x cameras via CSI - * bma250 IRQs + * audio * AXP battery management * NAND * OTG @@ -103,12 +104,8 @@ bma250@18 { compatible = "bosch,bma250"; reg = <0x18>; - - /* - * TODO: interrupt pins: - * int1 - PH00 - * int2 - PI10 - */ + interrupt-parent = <&pio>; + interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */ }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts new file mode 100644 index 000000000000..487ce63519dc --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts @@ -0,0 +1,226 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "iNet-1"; + compatible = "inet-tek,inet1", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + /* Accelerometer */ + bma250@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + interrupt-parent = <&pio>; + interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */ + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@1000 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <1000000>; + }; + + button@1200 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <1200000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 6c927a824ba2..77c31dab86b1 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -47,6 +47,7 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "INet-97F Rev 02"; @@ -61,8 +62,8 @@ }; }; -&ehci0 { - status = "okay"; +&cpu0 { + cpu-supply = <®_dcdc2>; }; &ehci1 { @@ -75,12 +76,62 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <200000>; + }; + + button@600 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <600000>; + }; + + button@800 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <800000>; + }; + + button@1000 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <1000000>; + }; - interrupt-controller; - #interrupt-cells = <1>; + button@1200 { + label = "Esc"; + linux,code = <KEY_ESC>; + channel = <0>; + voltage = <1200000>; }; }; @@ -94,15 +145,52 @@ status = "okay"; }; -&ohci0 { +&otg_sram { status = "okay"; }; -&ohci1 { - status = "okay"; +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; }; -®_usb1_vbus { +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { status = "okay"; }; @@ -116,8 +204,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { - usb1_vbus-supply = <®_usb1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts new file mode 100644 index 000000000000..2fffc0434075 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -0,0 +1,227 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "iNet-9F Rev 03"; + compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + /* Accelerometer */ + bma250@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + interrupt-parent = <&pio>; + interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */ + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <200000>; + }; + + button@600 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <600000>; + }; + + button@800 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <800000>; + }; + + button@1000 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <1000000>; + }; + + button@1200 { + label = "Esc"; + linux,code = <KEY_ESC>; + channel = <0>; + voltage = <1200000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts index dc2f2aeaff07..7afc7a64eef1 100644 --- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -156,6 +156,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { emac_power_pin_q5: emac_power_pin@0 { allwinner,pins = "PH19"; @@ -172,6 +176,11 @@ }; }; +®_usb0_vbus { + regulator-boot-on; + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -186,7 +195,13 @@ status = "okay"; }; +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + &usbphy { + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 02158bcd64ee..8e50723dbe02 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -91,6 +91,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -154,6 +158,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { led_pins_marsboard: led_pins@0 { allwinner,pins = "PB5", "PB6", "PB7", "PB8"; @@ -161,6 +169,13 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; }; ®_usb1_vbus { @@ -184,7 +199,15 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 28e32ad705cd..b350448c7217 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -124,6 +124,18 @@ }; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 4e3e1b9d8217..39034aa8e1ae 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -104,6 +104,10 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; @@ -129,12 +133,8 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; @@ -164,6 +164,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { led_pins_pcduino: led_pins@0 { allwinner,pins = "PH15", "PH16"; @@ -178,14 +182,40 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; }; -®_usb1_vbus { - status = "okay"; +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; }; -®_usb2_vbus { - status = "okay"; +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; }; &uart0 { @@ -194,8 +224,16 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb1_vbus-supply = <®_vcc5v0>; /* USB1 VBUS is always on */ + usb2_vbus-supply = <®_vcc5v0>; /* USB2 VBUS is always on */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts new file mode 100644 index 000000000000..de483a1bf36a --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts @@ -0,0 +1,78 @@ +/* + * Copyright 2015 Siarhei Siamashka <siarhei.siamashka@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * The LinkSprite pcDuino2 board is almost identical to the older + * LinkSprite pcDuino1 board. The only software visible difference + * is that the pcDuino2 board got a USB VBUS voltage regulator, which + * is controlled by the PD2 pin (pulled-up by default). Also one of + * the USB host ports has been replaced with a USB WIFI chip. + */ + +#include "sun4i-a10-pcduino.dts" + +/ { + model = "LinkSprite pcDuino2"; + compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10"; +}; + +&pio { + usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 { + allwinner,pins = "PD2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb2_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_pin_pcduino2>; + gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc3v3>; /* USB WIFI is always on */ + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts new file mode 100644 index 000000000000..82e69c3820a2 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -0,0 +1,199 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Point of View Protab2-IPS9"; + compatible = "pov,protab2-ips9", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + /* pull-ups and devices require AXP209 LDO3 */ + status = "failed"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@400 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <400000>; + }; + + button@800 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <800000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 1f3c51a08113..aa90f319309b 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -45,6 +45,7 @@ #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/clock/sun4i-a10-pll2.h> #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -195,6 +196,15 @@ clock-output-names = "pll1"; }; + pll2: clk@01c20008 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll2-clk"; + reg = <0x01c20008 0x8>; + clocks = <&osc24M>; + clock-output-names = "pll2-1x", "pll2-2x", + "pll2-4x", "pll2-8x"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; @@ -481,6 +491,14 @@ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; clock-output-names = "spi3"; }; + + codec_clk: clk@01c20140 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-codec-clk"; + reg = <0x01c20140 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "codec"; + }; }; soc@01c00000 { @@ -1004,6 +1022,19 @@ status = "disabled"; }; + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-codec"; + reg = <0x01c22c00 0x40>; + interrupts = <30>; + clocks = <&apb0_gates 0>, <&codec_clk>; + clock-names = "apb", "codec"; + dmas = <&dma SUN4I_DMA_NORMAL 19>, + <&dma SUN4I_DMA_NORMAL 19>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts new file mode 100644 index 000000000000..d4ad02182353 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts @@ -0,0 +1,159 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a10s.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Auxtek t003 A10s hdmi tv-stick"; + compatible = "allwinner,auxtek-t003", "allwinner,sun5i-a10s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_t003>; + + red { + label = "t003-tv-dongle:red:usr"; + gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ + default-state = "on"; + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp152: pmic@30 { + compatible = "x-powers,axp152"; + reg = <0x30>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_t003: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + led_pins_t003: led_pins@0 { + allwinner,pins = "PB2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb0_vbus { + gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + status = "okay"; +}; + +®_usb1_vbus { + gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb0_vbus_pin_a { + allwinner,pins = "PG13"; +}; + +&usb1_vbus_pin_a { + allwinner,pins = "PB10"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 5a422c1ff725..86d046a502e6 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -111,7 +111,7 @@ status = "okay"; at24@50 { - compatible = "at,24c16"; + compatible = "atmel,24c16"; pagesize = <16>; reg = <0x50>; read-only; diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts new file mode 100644 index 000000000000..9fea918f949e --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts @@ -0,0 +1,224 @@ +/* + * Copyright 2015 Jelle van der Waa <jelle@vdwaa.nl> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a10s.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "A10s-Wobo i5"; + compatible = "wobo,a10s-wobo-i5", "allwinner,sun5i-a10s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_wobo_i5>; + + blue { + label = "a10s-wobo-i5:blue:usr"; + gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_emac_3v3: emac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&emac_power_pin_wobo>; + regulator-name = "emac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_b>; + phy = <&phy1>; + status = "okay"; +}; + +&emac_sram { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&mdio { + phy-supply = <®_emac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + led_pins_wobo_i5: led_pins@0 { + allwinner,pins = "PB2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 { + allwinner,pins = "PB3"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + emac_power_pin_wobo: emac_power_pin@0 { + allwinner,pins = "PA02"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_usb1_vbus { + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb1_vbus_pin_a { + allwinner,pins = "PG12"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index a513b416a807..bddd0de88af6 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -77,6 +77,15 @@ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>; status = "disabled"; }; + + framebuffer@2 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0-tve0"; + clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>; + status = "disabled"; + }; }; clocks { @@ -156,6 +165,14 @@ #size-cells = <0>; }; + pwm: pwm@01c20e00 { + compatible = "allwinner,sun5i-a10s-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -195,13 +212,6 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart3_pins_a: uart3@0 { - allwinner,pins = "PG9", "PG10"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - emac_pins_a: emac0@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -213,6 +223,17 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + emac_pins_b: emac0@1 { + allwinner,pins = "PD6", "PD7", "PD10", + "PD11", "PD12", "PD13", "PD14", + "PD15", "PD18", "PD19", "PD20", + "PD21", "PD22", "PD23", "PD24", + "PD25", "PD26", "PD27"; + allwinner,function = "emac"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + mmc1_pins_a: mmc1@0 { allwinner,pins = "PG3", "PG4", "PG5", "PG6", "PG7", "PG8"; diff --git a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts new file mode 100644 index 000000000000..6fa54b661423 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts @@ -0,0 +1,227 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "INet-98V Rev 02"; + compatible = "primux,inet98v-rev2", "allwinner,sun5i-a13"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; + + mmccard: mmccard@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_usb0_vbus { + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb0_vbus_pin_a { + allwinner,pins = "PG12"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_ldo3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts new file mode 100644 index 000000000000..72e93acb5a9e --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts @@ -0,0 +1,60 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sun5i-q8-common.dtsi" + +/ { + model = "Q8 A13 Tablet"; + compatible = "allwinner,q8-a13", "allwinner,sun5i-a13"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&usbphy { + usb1_vbus-supply = <®_ldo3>; +}; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index f3631c9c6fa2..d910d3a6c41c 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -150,6 +150,16 @@ "apb1_uart3"; }; }; + + soc@01c00000 { + pwm: pwm@01c20e00 { + compatible = "allwinner,sun5i-a13-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + }; }; &cpu0 { diff --git a/arch/arm/boot/dts/sun5i-q8-common.dtsi b/arch/arm/boot/dts/sun5i-q8-common.dtsi new file mode 100644 index 000000000000..a78e189f6653 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-q8-common.dtsi @@ -0,0 +1,180 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "sunxi-q8-common.dtsi" + +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases { + serial0 = &uart1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + /* TODO: backlight uses axp gpio1 as enable pin */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +&i2c1 { + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +#include "axp209.dtsi" + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_q8: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PG12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts new file mode 100644 index 000000000000..530ab28e9ca2 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -0,0 +1,218 @@ +/* + * Copyright 2015 Free Electrons + * Copyright 2015 NextThing Co + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-r8.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "NextThing C.H.I.P."; + compatible = "nextthing,chip", "allwinner,sun5i-r8"; + + aliases { + i2c0 = &i2c0; + i2c2 = &i2c2; + serial0 = &uart1; + serial1 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&codec { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + + /* + * The interrupt is routed through the "External Fast + * Interrupt Request" pin (ball G13 of the module) + * directly to the main interrupt controller, without + * any other controller interfering. + */ + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + + xio: gpio@38 { + compatible = "nxp,pcf8574a"; + reg = <0x38>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&pio>; + interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + chip_vbus_pin: chip_vbus_pin@0 { + allwinner,pins = "PB10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + chip_id_det_pin: chip_id_det_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_dcdc2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "cpuvdd"; + regulator-always-on; +}; + +®_dcdc3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "corevdd"; + regulator-always-on; +}; + +®_ldo1 { + regulator-name = "rtcvdd"; +}; + +®_ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; + regulator-always-on; +}; + +®_ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-1v8"; +}; + +®_usb0_vbus { + pinctrl-0 = <&chip_vbus_pin>; + vin-supply = <®_vcc5v0>; + gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_a>, + <&uart3_pins_cts_rts_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&chip_id_det_pin>; + status = "okay"; + + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_vcc5v0>; +}; diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/sun5i-r8.dtsi new file mode 100644 index 000000000000..0ef865601ac9 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-r8.dtsi @@ -0,0 +1,59 @@ +/* + * Copyright 2015 Free Electrons + * Copyright 2015 NextThing Co + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun5i-a13.dtsi" + +/ { + chosen { + framebuffer@1 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0-tve0"; + clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 78b993abbaa3..59a9426e3bd4 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -44,6 +44,7 @@ #include "skeleton.dtsi" +#include <dt-bindings/clock/sun4i-a10-pll2.h> #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -102,6 +103,15 @@ clock-output-names = "pll1"; }; + pll2: clk@01c20008 { + #clock-cells = <1>; + compatible = "allwinner,sun5i-a13-pll2-clk"; + reg = <0x01c20008 0x8>; + clocks = <&osc24M>; + clock-output-names = "pll2-1x", "pll2-2x", + "pll2-4x", "pll2-8x"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; @@ -285,6 +295,14 @@ clock-output-names = "usb_ohci0", "usb_phy"; }; + codec_clk: clk@01c20140 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-codec-clk"; + reg = <0x01c20140 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "codec"; + }; + mbus_clk: clk@01c2015c { #clock-cells = <0>; compatible = "allwinner,sun5i-a13-mbus-clk"; @@ -529,6 +547,27 @@ allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + uart3_pins_a: uart3@0 { + allwinner,pins = "PG9", "PG10"; + allwinner,function = "uart3"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart3_pins_cts_rts_a: uart3-cts-rts@0 { + allwinner,pins = "PG11", "PG12"; + allwinner,function = "uart3"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + pwm0_pins: pwm0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; timer@01c20c00 { @@ -550,6 +589,19 @@ status = "disabled"; }; + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-codec"; + reg = <0x01c22c00 0x40>; + interrupts = <30>; + clocks = <&apb0_gates 0>, <&codec_clk>; + clock-names = "apb", "codec"; + dmas = <&dma SUN4I_DMA_NORMAL 19>, + <&dma SUN4I_DMA_NORMAL 19>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 0cf9926d1e93..f9cf36888d93 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -60,12 +60,34 @@ chosen { stdout-path = "serial0:115200n8"; }; + + i2c_lcd: i2c@0 { + /* The lcd panel i2c interface is hooked up via gpios */ + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_lcd_pins>; + gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */ + <&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */ + i2c-gpio,delay-us = <5>; + }; }; &ehci1 { status = "okay"; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -82,6 +104,13 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + + mma8452: mma8452@1d { + compatible = "fsl,mma8452"; + reg = <0x1d>; + interrupt-parent = <&pio>; + interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PA9 */ + }; }; &mmc0 { @@ -112,6 +141,13 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + i2c_lcd_pins: i2c_lcd_pin@0 { + allwinner,pins = "PA23", "PA24"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; }; ®_usb2_vbus { diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index d0cfadac0691..9a74637f677f 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -54,6 +54,8 @@ compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31"; aliases { + rtc0 = &pcf8563; + rtc1 = &rtc; serial0 = &uart0; }; @@ -67,13 +69,17 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { status = "okay"; }; &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>; phy = <&phy1>; phy-mode = "rgmii"; snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; @@ -119,7 +125,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; - vmmc-supply = <&vcc_3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ cd-inverted; @@ -134,7 +140,7 @@ &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>; - vmmc-supply = <&vcc_wifi>; + vmmc-supply = <®_aldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; @@ -146,6 +152,13 @@ }; &pio { + gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 { + allwinner,pins = "PA21"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 { allwinner,pins = "PA8"; allwinner,function = "gpio_in"; @@ -164,70 +177,69 @@ &p2wi { status = "okay"; - axp221: pmic@68 { + axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <1>; - dcdc1-supply = <&vcc_3v0>; - dcdc5-supply = <&vcc_dram>; - - regulators { - x-powers,dcdc-freq = <3000>; - - vcc_3v0: dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; - }; - - vdd_cpu: dcdc2 { - regulator-always-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-cpu"; - }; - - vdd_gpu: dcdc3 { - regulator-always-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-gpu"; - }; - - vdd_sys_dll: dcdc4 { - regulator-always-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-sys-dll"; - }; - - vcc_dram: dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; - }; - - vcc_wifi: aldo1 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_wifi"; - }; - - avcc: aldo3 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; - }; - }; }; }; +#include "axp22x.dtsi" + +®_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dc5ldo { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + ®_usb1_vbus { gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ status = "okay"; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 54bb83b58f42..b6ad7850fac6 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -61,7 +61,7 @@ #size-cells = <1>; ranges; - framebuffer@0 { + simplefb_hdmi: framebuffer@0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; @@ -69,7 +69,7 @@ status = "disabled"; }; - framebuffer@1 { + simplefb_lcd: framebuffer@1 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; @@ -691,6 +691,24 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + mmc2_pins_a: mmc2@0 { + allwinner,pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc2_8bit_emmc_pins: mmc2@1 { + allwinner,pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", + "PC13", "PC14", "PC15", + "PC24"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + gmac_pins_mii_a: gmac_mii@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA8", "PA9", "PA11", @@ -768,6 +786,13 @@ reg = <0x01c20ca0 0x20>; }; + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + rtp: rtp@01c25000 { compatible = "allwinner,sun6i-a31-ts"; reg = <0x01c25000 0x100>; @@ -1085,7 +1110,7 @@ resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <3>; #size-cells = <0>; #gpio-cells = <3>; diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts new file mode 100644 index 000000000000..2d4250b1faf8 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -0,0 +1,255 @@ +/* + * Copyright 2014 Siarhei Siamashka <siarhei.siamashka@gmail.com> + * Copyright 2015 Karsten Merker <merker@debian.org> + * Copyright 2015 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31s.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "MSI Primo81 tablet"; + compatible = "msi,primo81", "allwinner,sun6i-a31s"; +}; + +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + +&ehci0 { + /* rtl8188etv wifi is connected here */ + status = "okay"; +}; + +&i2c0 { + /* pull-ups and device VDDIO use AXP221 DLDO3 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "failed"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + ctp@5d { + pinctrl-names = "default"; + pinctrl-0 = <>911_int_primo81>; + compatible = "goodix,gt911"; + reg = <0x5d>; + interrupt-parent = <&pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */ + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + + accelerometer@1c { + pinctrl-names = "default"; + pinctrl-0 = <&mma8452_int_primo81>; + compatible = "fsl,mma8452"; + reg = <0x1c>; + interrupt-parent = <&pio>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */ + #io-channel-cells = <1>; + }; +}; + +&lradc { + vref-supply = <®_aldo3>; + status = "okay"; + + button@158 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <158730>; + }; + + button@349 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <349206>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>; + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + cd-inverted; + status = "okay"; +}; + +&pio { + gt911_int_primo81: gt911_int_pin@0 { + allwinner,pins = "PA3"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mma8452_int_primo81: mma8452_int_pin@0 { + allwinner,pins = "PA9"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc0_cd_pin_primo81: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dc1sw { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-lcd"; +}; + +®_dc5ldo { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; /* This is an educated guess */ +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_dldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vddio-csi"; +}; + +®_eldo3 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-mipi-bridge"; +}; + +&simplefb_lcd { + vcc-lcd-supply = <®_dc1sw>; + vdd-mipi-bridge-supply = <®_eldo3>; +}; + +&usb_otg { + /* otg support requires support for AXP221 usb-power-supply and GPIO */ + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_dldo1>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi new file mode 100644 index 000000000000..ea69fb8ad4d8 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi @@ -0,0 +1,140 @@ +/* + * Copyright 2015 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31s.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Sinlinx SinA31s Core Board"; + compatible = "sinlinx,sina31s", "allwinner,sun6i-a31s"; + + aliases { + serial0 = &uart0; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + +/* eMMC on core board */ +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_emmc_pins>; + vmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +/* AXP221s PMIC on core board */ +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dc5ldo { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +/* UART0 pads available on core board */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts new file mode 100644 index 000000000000..6ead2f5c847a --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts @@ -0,0 +1,153 @@ +/* + * Copyright 2015 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* The SinA31s development board has the SinA31s core board soldered on */ +#include "sun6i-a31s-sina31s-core.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + model = "Sinlinx SinA31s Development Board"; + compatible = "sinlinx,sina31s-sdk", "allwinner,sun6i-a31s"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_sina31s>; + + status { + label = "sina31s:status:usr"; + gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ + }; + }; +}; + +&ehci0 { + /* USB 2.0 4 port hub IC */ + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + phy-supply = <®_dldo1>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_aldo3>; + status = "okay"; + + button@158 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <158730>; + }; + + button@349 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <349206>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>; + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ + cd-inverted; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + led_pin_sina31s: led_pin@0 { + allwinner,pins = "PH13"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_sina31s: mmc0_cd_pin@0 { + allwinner,pins = "PA4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-gmac-phy"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts new file mode 100644 index 000000000000..db7fa13f5425 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -0,0 +1,194 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31s.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Sinovoip BPI-M2"; + compatible = "sinovoip,bpi-m2", "allwinner,sun6i-a31s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_bpi_m2>; + + blue { + label = "bpi-m2:blue:usr"; + gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + }; + + green { + label = "bpi-m2:green:usr"; + gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */ + }; + + red { + label = "bpi-m2:red:usr"; + gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */ + }; + }; + + mmc2_pwrseq: mmc2_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pwrseq_pin_bpi_m2>; + reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>; + phy = <&phy1>; + phy-mode = "rgmii"; + snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ + cd-inverted; + status = "okay"; +}; + +&mmc0_pins_a { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v0>; + mmc-pwrseq = <&mmc2_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2_pins_a { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 { + allwinner,pins = "PA21"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_bpi_m2: led_pins@0 { + allwinner,pins = "PG5", "PG10", "PG11"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 { + allwinner,pins = "PA4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&r_pio { + mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 { + allwinner,pins = "PL8"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts new file mode 100644 index 000000000000..b199020733d3 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -0,0 +1,134 @@ +/* + * Copyright 2015 Lawrence Yu <lyu@micile.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31s.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Yones TopTech BS1078 v2 Tablet"; + compatible = "yones-toptech,bs1078-v2", "allwinner,sun6i-a31s"; + + aliases { + serial0 = &uart0; + i2c1 = &i2c1; + i2c2 = &i2c2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + cd-inverted; + status = "okay"; +}; + +&mmc0_pins_a { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +®_usb1_vbus { + gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usb1_vbus_pin_a { + allwinner,pins = "PH27"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 9f7b472e6725..fd7594ff90d5 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -92,6 +92,20 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; + operating-points = < + /* kHz uV */ + 960000 1400000 + 912000 1400000 + 864000 1350000 + 720000 1250000 + 528000 1150000 + 312000 1100000 + 144000 1050000 + >; +}; + &ehci0 { status = "okay"; }; @@ -119,13 +133,9 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; @@ -159,7 +169,18 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { allwinner,pins = "PH10"; allwinner,function = "gpio_in"; @@ -182,6 +203,37 @@ }; }; +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -216,7 +268,21 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 39a51d5143f7..1fa832d7b469 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -84,6 +84,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; @@ -150,6 +154,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { led_pins_cubieboard2: led_pins@0 { allwinner,pins = "PH20", "PH21"; @@ -157,12 +165,24 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; }; ®_ahci_5v { status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + #include "axp209.dtsi" ®_dcdc2 { @@ -205,6 +225,9 @@ }; &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index e6b019232a9e..8da939ab8350 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -101,6 +101,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts new file mode 100644 index 000000000000..b7fe102475e7 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -0,0 +1,198 @@ +/* + * Copyright 2015 - Marcus Cooper <codekipper@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Olimex A20-Olimex-SOM-EVB"; + compatible = "olimex,a20-olimex-som-evb", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olimex_som_evb>; + + green { + label = "a20-olimex-som-evb:green:usr"; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_olimex_som_evb: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_olimex_som_evb>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 04237085dc39..35ad7006c53c 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -117,6 +117,18 @@ }; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 8acff78272b7..d5c796c8d16f 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -170,6 +170,12 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_a>; status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; }; &mmc0 { @@ -190,6 +196,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { allwinner,pins = "PC3"; @@ -204,6 +214,27 @@ allwinner,drive = <SUN4I_PINCTRL_20_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; + + usb0_vbus_pin_lime2: usb0_vbus_pin@0 { + allwinner,pins = "PC17"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; ®_ahci_5v { @@ -212,6 +243,12 @@ status = "okay"; }; +®_usb0_vbus { + pinctrl-0 = <&usb0_vbus_pin_lime2>; + gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -226,7 +263,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index c5d70caade82..7e3006f6a775 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -125,6 +125,12 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_a>; status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; }; &i2c2 { diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index 73cd81ee02e3..4f65664e5dfe 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -156,7 +156,18 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { allwinner,pins = "PH10"; allwinner,function = "gpio_in"; @@ -225,6 +236,10 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { pinctrl-0 = <&usb1_vbus_pin_bananapro>; gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ @@ -243,7 +258,21 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts index 55a06ceb80ec..71125bf64575 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -141,7 +141,18 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { allwinner,pins = "PH10"; allwinner,function = "gpio_in"; @@ -203,6 +214,10 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { pinctrl-0 = <&usb1_vbus_pin_bananapro>; gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ @@ -221,7 +236,21 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index 5361fce26b45..1757a6ad74e9 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -82,6 +82,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; @@ -108,13 +112,9 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; @@ -142,6 +142,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 { allwinner,pins = "PH2"; @@ -157,8 +161,15 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 { - allwinner,pins = "PH11"; + allwinner,pins = "PD2"; allwinner,function = "gpio_out"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; @@ -171,13 +182,37 @@ status = "okay"; }; -®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>; - gpio = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ - status = "okay"; +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; }; -®_usb2_vbus { +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +/* A single regulator (U24) powers both USB host ports. */ +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>; + gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */ status = "okay"; }; @@ -187,8 +222,16 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; + usb2_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index afc9ecebed21..861a4a66fb19 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -111,6 +111,10 @@ allwinner,pins = "PH2"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; @@ -137,16 +141,14 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; +#include "axp209.dtsi" + &ir0 { pinctrl-names = "default"; pinctrl-0 = <&ir0_rx_pins_a>; @@ -171,6 +173,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { led_pins_pcduino3: led_pins@0 { allwinner,pins = "PH15", "PH16"; @@ -185,6 +191,13 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; }; ®_ahci_5v { @@ -192,6 +205,31 @@ status = "okay"; }; +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -206,7 +244,15 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index 83c6d3f872ff..78239ad988e7 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -86,6 +86,8 @@ }; }; +#include "axp209.dtsi" + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_a>; @@ -135,7 +137,18 @@ status = "okay"; }; -#include "axp209.dtsi" +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; ®_dcdc2 { regulator-always-on; @@ -162,6 +175,10 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -176,7 +193,21 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts new file mode 100644 index 000000000000..85b500d8cc4c --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -0,0 +1,226 @@ +/* + * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Wits Pro A20 DKT"; + compatible = "wits,pro-a20-dkt", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + mmc3_pwrseq: mmc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>; + reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +#include "axp209.dtsi" + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&mmc3_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 391230c3dc93..e02eb720c4fc 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/clock/sun4i-a10-pll2.h> #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -199,6 +200,15 @@ clock-output-names = "pll1"; }; + pll2: clk@01c20008 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll2-clk"; + reg = <0x01c20008 0x8>; + clocks = <&osc24M>; + clock-output-names = "pll2-1x", "pll2-2x", + "pll2-4x", "pll2-8x"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-pll4-clk"; @@ -465,6 +475,14 @@ clock-output-names = "ir1"; }; + keypad_clk: clk@01c200c4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200c4 0x4>; + clocks = <&osc24M>; + clock-output-names = "keypad"; + }; + usb_clk: clk@01c200cc { #clock-cells = <1>; #reset-cells = <1>; @@ -483,6 +501,14 @@ clock-output-names = "spi3"; }; + codec_clk: clk@01c20140 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-codec-clk"; + reg = <0x01c20140 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "codec"; + }; + mbus_clk: clk@01c2015c { #clock-cells = <0>; compatible = "allwinner,sun5i-a13-mbus-clk"; @@ -1190,6 +1216,19 @@ status = "disabled"; }; + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun7i-a20-codec"; + reg = <0x01c22c00 0x40>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 0>, <&codec_clk>; + clock-names = "apb", "codec"; + dmas = <&dma SUN4I_DMA_NORMAL 19>, + <&dma SUN4I_DMA_NORMAL 19>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 27a925ec17d2..0c0964d4fa1f 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -175,31 +175,6 @@ clock-output-names = "apb1"; }; - ahb1_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun8i-a23-ahb1-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb1>; - clock-indices = <1>, <6>, - <8>, <9>, <10>, - <13>, <14>, - <19>, <20>, - <21>, <24>, <26>, - <29>, <32>, <36>, - <40>, <44>, <46>, - <52>, <54>, - <57>; - clock-output-names = "ahb1_mipidsi", "ahb1_dma", - "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", - "ahb1_nand", "ahb1_sdram", - "ahb1_hstimer", "ahb1_spi0", - "ahb1_spi1", "ahb1_otg", "ahb1_ehci", - "ahb1_ohci", "ahb1_ve", "ahb1_lcd", - "ahb1_csi", "ahb1_be", "ahb1_fe", - "ahb1_gpu", "ahb1_spinlock", - "ahb1_drc"; - }; - apb1_gates: clk@01c20068 { #clock-cells = <1>; compatible = "allwinner,sun8i-a23-apb1-gates-clk"; @@ -412,6 +387,13 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + pwm0_pins: pwm0 { + allwinner,pins = "PH0"; + allwinner,function = "pwm0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + i2c0_pins_a: i2c0@0 { allwinner,pins = "PH2", "PH3"; allwinner,function = "i2c0"; @@ -466,6 +448,14 @@ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; }; + pwm: pwm@01c21400 { + compatible = "allwinner,sun7i-a20-pwm"; + reg = <0x01c21400 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + lradc: lradc@01c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; @@ -589,6 +579,14 @@ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; }; + nmi_intc: interrupt-controller@01f00c0c { + compatible = "allwinner,sun6i-a31-sc-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01f00c0c 0x38>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; + prcm@01f01400 { compatible = "allwinner,sun8i-a23-prcm"; reg = <0x01f01400 0x200>; @@ -657,10 +655,18 @@ resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; + #interrupt-cells = <3>; #address-cells = <1>; #size-cells = <0>; #gpio-cells = <3>; + r_rsb_pins: r_rsb { + allwinner,pins = "PL0", "PL1"; + allwinner,function = "s_rsb"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + r_uart_pins_a: r_uart@0 { allwinner,pins = "PL2", "PL3"; allwinner,function = "s_uart"; @@ -668,5 +674,19 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + + r_rsb: rsb@01f03400 { + compatible = "allwinner,sun8i-a23-rsb"; + reg = <0x01f03400 0x400>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 3>; + clock-frequency = <3000000>; + resets = <&apb0_rst 3>; + pinctrl-names = "default"; + pinctrl-0 = <&r_rsb_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts new file mode 100644 index 000000000000..1aeb06c649b9 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts @@ -0,0 +1,145 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a23.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Allwinner GT90H Quad Core Tablet (v4)"; + compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a33"; + + aliases { + serial0 = &r_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; + + button@600 { + label = "Back"; + linux,code = <KEY_BACK>; + channel = <0>; + voltage = <600000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>; + /* FIXME this really is aldo1, correct once we've pmic support */ + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_gt90h: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; + +/* + * FIXME for now we only support host mode and rely on u-boot to have + * turned on Vbus which is controlled by the axp223 pmic on the board. + * + * Once we have axp223 support we should switch to fully supporting otg. + */ +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts index 382d64c3b78e..c2f22fc33811 100644..120000 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts @@ -1,54 +1 @@ -/* - * Copyright 2015 Hans de Goede <hdegoede@redhat.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate - * dtb file since some gpio-s surrounding the wlan/bluetooth are different, - * and it uses different camera sensors. - */ - -#include "sun8i-a23-ippo-q8h-v5.dts" - -/ { - model = "Ippo Q8H Dual Core Tablet (v1.2)"; - compatible = "ippo,q8h-v1.2", "allwinner,sun8i-a23"; -}; +sun8i-a23-q8-tablet.dts
\ No newline at end of file diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index 8d9da6886a4c..c2f22fc33811 100644..120000 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -1,136 +1 @@ -/* - * Copyright 2014 Chen-Yu Tsai - * - * Chen-Yu Tsai <wens@csie.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-a23.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> - -/ { - model = "Ippo Q8H Dual Core Tablet (v5)"; - compatible = "ippo,q8h-v5", "allwinner,sun8i-a23"; - - aliases { - serial0 = &r_uart; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - /* pull-ups and devices require PMIC regulator */ - status = "failed"; -}; - -&lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; -}; - -&pio { - mmc0_cd_pin_q8h: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; +sun8i-a23-q8-tablet.dts
\ No newline at end of file diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts new file mode 100644 index 000000000000..6062ea7a9903 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts @@ -0,0 +1,65 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a23.dtsi" +#include "sun8i-q8-common.dtsi" + +/ { + model = "Q8 A23 Tablet"; + compatible = "allwinner,q8-a23", "allwinner,sun8i-a23"; +}; + +/* + * FIXME for now we only support host mode and rely on u-boot to have + * turned on Vbus which is controlled by the axp223 pmic on the board. + * + * Once we have axp223 support we should switch to fully supporting otg. + */ +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 2cc27c7a59dc..92e6616979ea 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -50,6 +50,31 @@ }; clocks { + ahb1_gates: clk@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a23-ahb1-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb1>; + clock-indices = <1>, <6>, + <8>, <9>, <10>, + <13>, <14>, + <19>, <20>, + <21>, <24>, <26>, + <29>, <32>, <36>, + <40>, <44>, <46>, + <52>, <53>, + <54>, <57>; + clock-output-names = "ahb1_mipidsi", "ahb1_dma", + "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", + "ahb1_nand", "ahb1_sdram", + "ahb1_hstimer", "ahb1_spi0", + "ahb1_spi1", "ahb1_otg", "ahb1_ehci", + "ahb1_ohci", "ahb1_ve", "ahb1_lcd", + "ahb1_csi", "ahb1_be", "ahb1_fe", + "ahb1_gpu", "ahb1_msgbox", + "ahb1_spinlock", "ahb1_drc"; + }; + mbus_clk: clk@01c2015c { #clock-cells = <0>; compatible = "allwinner,sun8i-a23-mbus-clk"; diff --git a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts index 19db844863bb..4519fd791a8f 100644..120000 --- a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts +++ b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts @@ -1,88 +1 @@ -/* - * Copyright 2015 Vishnu Patekar - * Vishnu Patekar <vishnupatekar0510@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-a33.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> - -/ { - model = "ET Q8 Quad Core Tablet (v1.6)"; - compatible = "et,q8-v1.6", "allwinner,sun8i-a33"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; +sun8i-a33-q8-tablet.dts
\ No newline at end of file diff --git a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts index a43897515fb6..4519fd791a8f 100644..120000 --- a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts +++ b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts @@ -1,133 +1 @@ -/* - * Copyright 2015 Hans de Goede <hdegoede@redhat.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-a33.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> - -/ { - model = "Ippo Q8H Quad Core Tablet (v1.2)"; - compatible = "ippo,a33-q8h-v1.2", "allwinner,sun8i-a33"; - - aliases { - serial0 = &r_uart; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - -&lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; -}; - -&pio { - mmc0_cd_pin_q8h: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; +sun8i-a33-q8-tablet.dts
\ No newline at end of file diff --git a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts new file mode 100644 index 000000000000..44b32296a025 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts @@ -0,0 +1,65 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sun8i-q8-common.dtsi" + +/ { + model = "Q8 A33 Tablet"; + compatible = "allwinner,q8-a33", "allwinner,sun8i-a33"; +}; + +/* + * FIXME for now we only support host mode and rely on u-boot to have + * turned on Vbus which is controlled by the axp223 pmic on the board. + * + * Once we have axp223 support we should switch to fully supporting otg. + */ +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 1d5390d4e03a..13ce68f06dd6 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -130,6 +130,10 @@ }; }; +&r_rsb { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_b>; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index faa7d3c1fcea..001d8402ca18 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -72,6 +72,41 @@ clock-output-names = "pll11"; }; + ahb1_gates: clk@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a33-ahb1-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb1>; + clock-indices = <1>, <5>, + <6>, <8>, <9>, + <10>, <13>, <14>, + <19>, <20>, + <21>, <24>, <26>, + <29>, <32>, <36>, + <40>, <44>, <46>, + <52>, <53>, + <54>, <57>, + <58>; + clock-output-names = "ahb1_mipidsi", "ahb1_ss", + "ahb1_dma","ahb1_mmc0", "ahb1_mmc1", + "ahb1_mmc2", "ahb1_nand", "ahb1_sdram", + "ahb1_hstimer", "ahb1_spi0", + "ahb1_spi1", "ahb1_otg", "ahb1_ehci", + "ahb1_ohci", "ahb1_ve", "ahb1_lcd", + "ahb1_csi", "ahb1_be", "ahb1_fe", + "ahb1_gpu", "ahb1_msgbox", + "ahb1_spinlock", "ahb1_drc", + "ahb1_sat"; + }; + + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 0>; + clock-output-names = "ss"; + }; + mbus_clk: clk@01c2015c { #clock-cells = <0>; compatible = "allwinner,sun8i-a23-mbus-clk"; @@ -82,6 +117,16 @@ }; soc@01c00000 { + crypto: crypto-engine@01c15000 { + compatible = "allwinner,sun4i-a10-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ahb1_gates 5>, <&ss_clk>; + clock-names = "ahb", "mod"; + resets = <&ahb1_rst 5>; + reset-names = "ahb"; + }; + usb_otg: usb@01c19000 { compatible = "allwinner,sun8i-a33-musb"; reg = <0x01c19000 0x0400>; diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi new file mode 100644 index 000000000000..1a69231d2da5 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -0,0 +1,101 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "sunxi-q8-common.dtsi" + +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases { + serial0 = &r_uart; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en_pin_q8>; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + /* backlight is powered by AXP223 DC1SW */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + bl_en_pin_q8: bl_en_pin@0 { + allwinner,pins = "PH6"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_q8: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&r_rsb { + status = "okay"; +}; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 5908e3dcf965..1118bf5cc4fb 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -594,7 +594,7 @@ clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <3>; #size-cells = <0>; #gpio-cells = <3>; diff --git a/arch/arm/boot/dts/sunxi-q8-common.dtsi b/arch/arm/boot/dts/sunxi-q8-common.dtsi new file mode 100644 index 000000000000..b8241462fcea --- /dev/null +++ b/arch/arm/boot/dts/sunxi-q8-common.dtsi @@ -0,0 +1,83 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> +#include "sunxi-common-regulators.dtsi" + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index a9aec23e06f2..40c23a0b7cfc 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -159,7 +159,7 @@ vin-ldo9-10-supply = <&vdd_5v0_sys>; vin-ldo11-supply = <&vdd_3v3_run>; - sd0 { + vdd_cpu: sd0 { regulator-name = "+VDD_CPU_AP"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1350000>; @@ -397,6 +397,13 @@ non-removable; }; + /* CPU DFLL clock */ + clock@0,70110000 { + status = "okay"; + vdd-cpu-supply = <&vdd_cpu>; + nvidia,i2c-fs-rate = <400000>; + }; + ahub@0,70300000 { i2s@0,70301100 { status = "okay"; @@ -487,6 +494,12 @@ }; }; + cpus { + cpu@0 { + vdd-cpu-supply = <&vdd_cpu>; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 819e2ae2cabe..68669f791c8b 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -610,26 +610,20 @@ sata@0,70020000 { compatible = "nvidia,tegra124-ahci"; - reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */ - <0x0 0x70020000 0x0 0x7000>; /* SATA */ - + <0x0 0x70020000 0x0 0x7000>; /* SATA */ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA124_CLK_SATA>, - <&tegra_car TEGRA124_CLK_SATA_OOB>, - <&tegra_car TEGRA124_CLK_CML1>, - <&tegra_car TEGRA124_CLK_PLL_E>; + <&tegra_car TEGRA124_CLK_SATA_OOB>, + <&tegra_car TEGRA124_CLK_CML1>, + <&tegra_car TEGRA124_CLK_PLL_E>; clock-names = "sata", "sata-oob", "cml1", "pll_e"; - resets = <&tegra_car 124>, - <&tegra_car 123>, - <&tegra_car 129>; + <&tegra_car 123>, + <&tegra_car 129>; reset-names = "sata", "sata-oob", "sata-cold"; - phys = <&padctl TEGRA_XUSB_PADCTL_SATA>; phy-names = "sata-phy"; - status = "disabled"; }; @@ -638,7 +632,7 @@ reg = <0x0 0x70030000 0x0 0x10000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_HDA>, - <&tegra_car TEGRA124_CLK_HDA2HDMI>, + <&tegra_car TEGRA124_CLK_HDA2HDMI>, <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>; clock-names = "hda", "hda2hdmi", "hda2codec_2x"; resets = <&tegra_car 125>, /* hda */ diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 969b828505ae..33173e1bace9 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -603,8 +603,8 @@ <&tegra_car TEGRA20_CLK_PLL_E>; clock-names = "pex", "afi", "pll_e"; resets = <&tegra_car 70>, - <&tegra_car 72>, - <&tegra_car 74>; + <&tegra_car 72>, + <&tegra_car 74>; reset-names = "pex", "afi", "pcie_x"; status = "disabled"; diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts index 6236bdecb48b..f2879cfcca62 100644 --- a/arch/arm/boot/dts/tegra30-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -126,6 +126,10 @@ }; }; + hda@70030000 { + status = "okay"; + }; + sd1: sdhci@78000000 { status = "okay"; bus-width = <4>; @@ -149,6 +153,7 @@ usb-phy@7d000000 { status = "okay"; + dr_mode = "otg"; vbus-supply = <&usbo1_vbus_reg>; }; @@ -175,7 +180,7 @@ backlight: backlight { compatible = "pwm-backlight"; - /* PWM0 */ + /* PWM_BKL1 */ pwms = <&pwm 0 5000000>; brightness-levels = <255 231 223 207 191 159 127 0>; default-brightness-level = <6>; @@ -186,10 +191,10 @@ gpio-keys { compatible = "gpio-keys"; - power { - label = "Power"; + wakeup { + label = "WAKE1_MICO"; gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; + linux,code = <KEY_WAKEUP>; debounce-interval = <10>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index a5446cba9804..bf361277fe10 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -1,8 +1,9 @@ #include "tegra30.dtsi" /* - * Toradex Apalis T30 Device Tree - * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C + * Toradex Apalis T30 Module Device Tree + * Compatible for Revisions 1GB: V1.0A, V1.1A; 1GB IT: V1.1A; + * 2GB: V1.0B, V1.0C, V1.0E, V1.1A */ / { model = "Toradex Apalis T30"; @@ -33,8 +34,8 @@ host1x@50000000 { hdmi@54280000 { - vdd-supply = <&sys_3v3_reg>; - pll-supply = <&vio_reg>; + vdd-supply = <&avdd_hdmi_3v3_reg>; + pll-supply = <&avdd_hdmi_pll_1v8_reg>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; @@ -57,25 +58,25 @@ /* Apalis BKL1_PWM */ uart3_rts_n_pc0 { - nvidia,pins = "uart3_rts_n_pc0"; + nvidia,pins = "uart3_rts_n_pc0"; nvidia,function = "pwm0"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; /* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */ uart3_cts_n_pa1 { - nvidia,pins = "uart3_cts_n_pa1"; - nvidia,function = "rsvd1"; + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; /* Apalis CAN1 on SPI6 */ spi2_cs0_n_px3 { - nvidia,pins = "spi2_cs0_n_px3", - "spi2_miso_px1", - "spi2_mosi_px0", - "spi2_sck_px2"; + nvidia,pins = "spi2_cs0_n_px3", + "spi2_miso_px1", + "spi2_mosi_px0", + "spi2_sck_px2"; nvidia,function = "spi6"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -91,10 +92,10 @@ /* Apalis CAN2 on SPI4 */ gmi_a16_pj7 { - nvidia,pins = "gmi_a16_pj7", - "gmi_a17_pb0", - "gmi_a18_pb1", - "gmi_a19_pk7"; + nvidia,pins = "gmi_a16_pj7", + "gmi_a17_pb0", + "gmi_a18_pb1", + "gmi_a19_pk7"; nvidia,function = "spi4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -108,6 +109,30 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; + /* Apalis Digital Audio */ + clk1_req_pee2 { + nvidia,pins = "clk1_req_pee2"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_fs_pn0 { + nvidia,pins = "dap1_fs_pn0", + "dap1_din_pn1", + "dap1_dout_pn2", + "dap1_sclk_pn3"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + /* Apalis I2C3 */ cam_i2c_scl_pbb1 { nvidia,pins = "cam_i2c_scl_pbb1", @@ -122,21 +147,21 @@ /* Apalis MMC1 */ sdmmc3_clk_pa6 { - nvidia,pins = "sdmmc3_clk_pa6", - "sdmmc3_cmd_pa7"; + nvidia,pins = "sdmmc3_clk_pa6", + "sdmmc3_cmd_pa7"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc3_dat0_pb7 { - nvidia,pins = "sdmmc3_dat0_pb7", - "sdmmc3_dat1_pb6", - "sdmmc3_dat2_pb5", - "sdmmc3_dat3_pb4", - "sdmmc3_dat4_pd1", - "sdmmc3_dat5_pd0", - "sdmmc3_dat6_pd3", - "sdmmc3_dat7_pd4"; + nvidia,pins = "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "sdmmc3_dat4_pd1", + "sdmmc3_dat5_pd0", + "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -151,32 +176,32 @@ }; /* Apalis PWM1 */ - gpio_pu6 { - nvidia,pins = "gpio_pu6"; + pu6 { + nvidia,pins = "pu6"; nvidia,function = "pwm3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; /* Apalis PWM2 */ - gpio_pu5 { - nvidia,pins = "gpio_pu5"; + pu5 { + nvidia,pins = "pu5"; nvidia,function = "pwm2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; /* Apalis PWM3 */ - gpio_pu4 { - nvidia,pins = "gpio_pu4"; + pu4 { + nvidia,pins = "pu4"; nvidia,function = "pwm1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; /* Apalis PWM4 */ - gpio_pu3 { - nvidia,pins = "gpio_pu3"; + pu3 { + nvidia,pins = "pu3"; nvidia,function = "pwm0"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -198,11 +223,11 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc1_cmd_pz1 { - nvidia,pins = "sdmmc1_cmd_pz1", - "sdmmc1_dat0_py7", - "sdmmc1_dat1_py6", - "sdmmc1_dat2_py5", - "sdmmc1_dat3_py4"; + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -218,10 +243,10 @@ /* Apalis SPI1 */ spi1_sck_px5 { - nvidia,pins = "spi1_sck_px5", - "spi1_mosi_px4", - "spi1_miso_px7", - "spi1_cs0_n_px6"; + nvidia,pins = "spi1_sck_px5", + "spi1_mosi_px4", + "spi1_miso_px7", + "spi1_cs0_n_px6"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -229,10 +254,10 @@ /* Apalis SPI2 */ lcd_sck_pz4 { - nvidia,pins = "lcd_sck_pz4", - "lcd_sdout_pn5", - "lcd_sdin_pz2", - "lcd_cs0_n_pn4"; + nvidia,pins = "lcd_sck_pz4", + "lcd_sdout_pn5", + "lcd_sdin_pz2", + "lcd_cs0_n_pn4"; nvidia,function = "spi5"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -240,14 +265,14 @@ /* Apalis UART1 */ ulpi_data0 { - nvidia,pins = "ulpi_data0_po1", - "ulpi_data1_po2", - "ulpi_data2_po3", - "ulpi_data3_po4", - "ulpi_data4_po5", - "ulpi_data5_po6", - "ulpi_data6_po7", - "ulpi_data7_po0"; + nvidia,pins = "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -255,10 +280,10 @@ /* Apalis UART2 */ ulpi_clk_py0 { - nvidia,pins = "ulpi_clk_py0", - "ulpi_dir_py1", - "ulpi_nxt_py2", - "ulpi_stp_py3"; + nvidia,pins = "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3"; nvidia,function = "uartd"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -266,8 +291,8 @@ /* Apalis UART3 */ uart2_rxd_pc3 { - nvidia,pins = "uart2_rxd_pc3", - "uart2_txd_pc2"; + nvidia,pins = "uart2_rxd_pc3", + "uart2_txd_pc2"; nvidia,function = "uartb"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -275,8 +300,8 @@ /* Apalis UART4 */ uart3_rxd_pw7 { - nvidia,pins = "uart3_rxd_pw7", - "uart3_txd_pw6"; + nvidia,pins = "uart3_rxd_pw7", + "uart3_txd_pw6"; nvidia,function = "uartc"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -312,21 +337,21 @@ /* eMMC (On-module) */ sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - "sdmmc4_rst_n_pcc3"; + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -334,10 +359,10 @@ /* LVDS Transceiver Configuration */ pbb0 { - nvidia,pins = "pbb0", - "pbb7", - "pcc1", - "pcc2"; + nvidia,pins = "pbb0", + "pbb7", + "pcc1", + "pcc2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -345,10 +370,10 @@ nvidia,lock = <TEGRA_PIN_DISABLE>; }; pbb3 { - nvidia,pins = "pbb3", - "pbb4", - "pbb5", - "pbb6"; + nvidia,pins = "pbb3", + "pbb4", + "pbb5", + "pbb6"; nvidia,function = "displayb"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -635,6 +660,7 @@ nvidia,sys-clock-req-active-high; }; + /* eMMC */ sdhci@78000600 { status = "okay"; bus-width = <8>; @@ -666,18 +692,40 @@ #address-cells = <1>; #size-cells = <0>; - sys_3v3_reg: regulator@100 { + avdd_hdmi_pll_1v8_reg: regulator@100 { compatible = "regulator-fixed"; reg = <100>; + regulator-name = "+V1.8_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <&vio_reg>; + }; + + sys_3v3_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; regulator-name = "3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - charge_pump_5v0_reg: regulator@101 { + avdd_hdmi_3v3_reg: regulator@102 { compatible = "regulator-fixed"; - reg = <101>; + reg = <102>; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + charge_pump_5v0_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; regulator-name = "5v0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts index 4d3ddc585641..3ff019f47d00 100644 --- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -55,7 +55,7 @@ /* M41T0M6 real time clock on carrier board */ rtc@68 { - compatible = "stm,m41t00"; + compatible = "st,m41t00"; reg = <0x68>; }; }; @@ -84,6 +84,7 @@ }; }; + /* SD/MMC */ sdhci@78000200 { status = "okay"; bus-width = <4>; @@ -136,10 +137,10 @@ gpio-keys { compatible = "gpio-keys"; - power { - label = "Power"; + wakeup { + label = "SODIMM pin 45 wakeup"; gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; - linux,code = <KEY_POWER>; + linux,code = <KEY_WAKEUP>; debounce-interval = <10>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index c4ed1bec4d92..2d8c58fd9357 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -2,8 +2,8 @@ #include "tegra30.dtsi" /* - * Toradex Colibri T30 Device Tree - * Compatible for Revisions 1.1B/1.1C/1.1D + * Toradex Colibri T30 Module Device Tree + * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E; IT: V1.1A */ / { model = "Toradex Colibri T30"; @@ -15,8 +15,8 @@ host1x@50000000 { hdmi@54280000 { - vdd-supply = <&sys_3v3_reg>; - pll-supply = <&vio_reg>; + vdd-supply = <&avdd_hdmi_3v3_reg>; + pll-supply = <&avdd_hdmi_pll_1v8_reg>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; @@ -39,7 +39,7 @@ /* Colibri Backlight PWM<A> */ sdmmc3_dat3_pb4 { - nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,pins = "sdmmc3_dat3_pb4"; nvidia,function = "pwm0"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -66,15 +66,6 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - /* Thermal alert, need to be disabled */ - lcd_dc1_pd2 { - nvidia,pins = "lcd_dc1_pd2"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; - }; - /* Colibri MMC */ kb_row10_ps2 { nvidia,pins = "kb_row10_ps2"; @@ -83,11 +74,11 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; kb_row11_ps3 { - nvidia,pins = "kb_row11_ps3", - "kb_row12_ps4", - "kb_row13_ps5", - "kb_row14_ps6", - "kb_row15_ps7"; + nvidia,pins = "kb_row11_ps3", + "kb_row12_ps4", + "kb_row13_ps5", + "kb_row14_ps6", + "kb_row15_ps7"; nvidia,function = "sdmmc2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -95,17 +86,17 @@ /* Colibri SSP */ ulpi_clk_py0 { - nvidia,pins = "ulpi_clk_py0", - "ulpi_dir_py1", - "ulpi_nxt_py2", - "ulpi_stp_py3"; + nvidia,pins = "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc3_dat6_pd3 { - nvidia,pins = "sdmmc3_dat6_pd3", - "sdmmc3_dat7_pd4"; + nvidia,pins = "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; nvidia,function = "spdif"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; @@ -113,14 +104,14 @@ /* Colibri UART_A */ ulpi_data0 { - nvidia,pins = "ulpi_data0_po1", - "ulpi_data1_po2", - "ulpi_data2_po3", - "ulpi_data3_po4", - "ulpi_data4_po5", - "ulpi_data5_po6", - "ulpi_data6_po7", - "ulpi_data7_po0"; + nvidia,pins = "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -128,10 +119,10 @@ /* Colibri UART_B */ gmi_a16_pj7 { - nvidia,pins = "gmi_a16_pj7", - "gmi_a17_pb0", - "gmi_a18_pb1", - "gmi_a19_pk7"; + nvidia,pins = "gmi_a16_pj7", + "gmi_a17_pb0", + "gmi_a18_pb1", + "gmi_a19_pk7"; nvidia,function = "uartd"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -139,8 +130,8 @@ /* Colibri UART_C */ uart2_rxd { - nvidia,pins = "uart2_rxd_pc3", - "uart2_txd_pc2"; + nvidia,pins = "uart2_rxd_pc3", + "uart2_txd_pc2"; nvidia,function = "uartb"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -148,25 +139,59 @@ /* eMMC */ sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - "sdmmc4_rst_n_pcc3"; + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; + + /* Power I2C (On-module) */ + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* + * THERMD_ALERT#, unlatched I2C address pin of LM95245 + * temperature sensor therefore requires disabling for + * now + */ + lcd_dc1_pd2 { + nvidia,pins = "lcd_dc1_pd2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* TOUCH_PEN_INT# */ + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; }; }; @@ -236,7 +261,7 @@ /* * EN_+V3.3 switching via FET: * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN - * see also v3_3 fixed supply + * see also 3v3 fixed supply */ ldo2_reg: ldo2 { regulator-name = "en_3v3"; @@ -295,6 +320,46 @@ }; }; + /* STMPE811 touch screen controller */ + stmpe811@41 { + compatible = "st,stmpe811"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + reg = <0>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + }; + /* * LM95245 temperature sensor * Note: OVERT_N directly connected to PMIC PWRDN @@ -331,7 +396,8 @@ nvidia,sys-clock-req-active-high; }; - emmc: sdhci@78000600 { + /* eMMC */ + sdhci@78000600 { status = "okay"; bus-width = <8>; non-removable; @@ -365,18 +431,40 @@ #address-cells = <1>; #size-cells = <0>; - sys_3v3_reg: regulator@100 { + avdd_hdmi_pll_1v8_reg: regulator@100 { compatible = "regulator-fixed"; reg = <100>; + regulator-name = "+V1.8_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <&vio_reg>; + }; + + sys_3v3_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; regulator-name = "3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - charge_pump_5v0_reg: regulator@101 { + avdd_hdmi_3v3_reg: regulator@102 { compatible = "regulator-fixed"; - reg = <101>; + reg = <102>; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + charge_pump_5v0_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; regulator-name = "5v0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index c6938ad1b543..313e260529a3 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -42,8 +42,8 @@ <&tegra_car TEGRA30_CLK_CML0>; clock-names = "pex", "afi", "pll_e", "cml"; resets = <&tegra_car 70>, - <&tegra_car 72>, - <&tegra_car 74>; + <&tegra_car 72>, + <&tegra_car 74>; reset-names = "pex", "afi", "pcie_x"; status = "disabled"; @@ -153,7 +153,7 @@ &tegra_car TEGRA30_CLK_GR3D2>; clock-names = "3d", "3d2"; resets = <&tegra_car 24>, - <&tegra_car 98>; + <&tegra_car 98>; reset-names = "3d", "3d2"; }; @@ -457,7 +457,7 @@ }; i2c@7000c000 { - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000c000 0x100>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -662,7 +662,7 @@ reg = <0x70030000 0x10000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA30_CLK_HDA>, - <&tegra_car TEGRA30_CLK_HDA2HDMI>, + <&tegra_car TEGRA30_CLK_HDA2HDMI>, <&tegra_car TEGRA30_CLK_HDA2CODEC_2X>; clock-names = "hda", "hda2hdmi", "hda2codec_2x"; resets = <&tegra_car 125>, /* hda */ diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts index bfd3bb8c8285..f1e9d40149ab 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts @@ -57,8 +57,7 @@ }; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &serial0; + stdout-path = "serial0:115200n8"; }; aliases { @@ -74,12 +73,11 @@ }; &extbus { - ranges = <0 0x00000000 0x0f000000 0x01000000 - 1 0x00000000 0x00000000 0x08000000>; + ranges = <1 0x00000000 0x42000000 0x02000000>; }; &support_card { - ranges = <0x00000000 1 0x03f00000 0x00100000>; + ranges = <0x00000000 1 0x01f00000 0x00100000>; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi index a6a185fae8f1..af493819548d 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi @@ -55,6 +55,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; }; @@ -91,6 +92,18 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(512 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -187,10 +200,9 @@ clock-frequency = <100000>; }; - system-bus-controller-misc@59800000 { - compatible = "socionext,uniphier-system-bus-controller-misc", - "syscon"; - reg = <0x59800000 0x2000>; + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; }; usb0: usb@5a800100 { diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts index f80f772d99fb..5baa9fc9c888 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts @@ -57,8 +57,7 @@ }; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &serial0; + stdout-path = "serial0:115200n8"; }; aliases { @@ -76,12 +75,11 @@ }; &extbus { - ranges = <0 0x00000000 0x0f000000 0x01000000 - 1 0x00000000 0x00000000 0x08000000>; + ranges = <1 0x00000000 0x42000000 0x02000000>; }; &support_card { - ranges = <0x00000000 1 0x03f00000 0x00100000>; + ranges = <0x00000000 1 0x01f00000 0x00100000>; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts index 69a5b7d39629..24626687d4df 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts @@ -57,8 +57,7 @@ }; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &serial0; + stdout-path = "serial0:115200n8"; }; aliases { @@ -76,12 +75,11 @@ }; &extbus { - ranges = <0 0x00000000 0x0f000000 0x01000000 - 1 0x00000000 0x00000000 0x08000000>; + ranges = <1 0x00000000 0x42000000 0x02000000>; }; &support_card { - ranges = <0x00000000 1 0x03f00000 0x00100000>; + ranges = <0x00000000 1 0x01f00000 0x00100000>; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi index e8bbc454d788..254642fe0e71 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi @@ -56,12 +56,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; }; @@ -98,6 +100,18 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(768 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -218,10 +232,9 @@ clock-frequency = <400000>; }; - system-bus-controller-misc@59800000 { - compatible = "socionext,uniphier-system-bus-controller-misc", - "syscon"; - reg = <0x59800000 0x2000>; + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; }; usb2: usb@5a800100 { diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi index 59c2b127cffa..11eb76239feb 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi @@ -56,12 +56,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; }; @@ -98,6 +100,31 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, + <0x506c0000 0x400>; + interrupts = <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <(2 * 1024 * 1024)>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + next-level-cache = <&l3>; + }; + + l3: l3-cache@500c8000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, + <0x506c8000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(2 * 1024 * 1024)>; + cache-sets = <512>; + cache-line-size = <256>; + cache-level = <3>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -214,10 +241,9 @@ clock-frequency = <400000>; }; - system-bus-controller-misc@59800000 { - compatible = "socionext,uniphier-system-bus-controller-misc", - "syscon"; - reg = <0x59800000 0x2000>; + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; }; pinctrl: pinctrl@5f801000 { diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts index 1a440f87fa92..b7a032156789 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts @@ -58,8 +58,7 @@ }; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &serial0; + stdout-path = "serial0:115200n8"; }; aliases { @@ -75,12 +74,11 @@ }; &extbus { - ranges = <0 0x00000000 0x0f000000 0x01000000 - 1 0x00000000 0x00000000 0x08000000>; + ranges = <1 0x00000000 0x42000000 0x02000000>; }; &support_card { - ranges = <0x00000000 1 0x03f00000 0x00100000>; + ranges = <0x00000000 1 0x01f00000 0x00100000>; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi index 3cc90cd37a26..691a17d765c2 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi @@ -56,12 +56,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; }; @@ -120,6 +122,18 @@ <0x20000100 0x100>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(512 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -202,10 +216,9 @@ clock-frequency = <400000>; }; - system-bus-controller-misc@59800000 { - compatible = "socionext,uniphier-system-bus-controller-misc", - "syscon"; - reg = <0x59800000 0x2000>; + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; }; usb0: usb@5a800100 { diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts index 955d417a5c42..fc7250c61674 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts @@ -57,8 +57,7 @@ }; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &serial0; + stdout-path = "serial0:115200n8"; }; aliases { @@ -74,12 +73,11 @@ }; &extbus { - ranges = <0 0x00000000 0x0f000000 0x01000000 - 1 0x00000000 0x00000000 0x08000000>; + ranges = <1 0x00000000 0x42000000 0x02000000>; }; &support_card { - ranges = <0x00000000 1 0x03f00000 0x00100000>; + ranges = <0x00000000 1 0x01f00000 0x00100000>; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi index 58067dfc16e5..e88559b66be7 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi @@ -55,6 +55,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; }; @@ -91,6 +92,18 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(256 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -187,10 +200,9 @@ clock-frequency = <100000>; }; - system-bus-controller-misc@59800000 { - compatible = "socionext,uniphier-system-bus-controller-misc", - "syscon"; - reg = <0x59800000 0x2000>; + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; }; usb0: usb@5a800100 { diff --git a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts new file mode 100644 index 000000000000..9d7ec5c204dd --- /dev/null +++ b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts @@ -0,0 +1,78 @@ +/* + * Device Tree Source for UniPhier ProXstream2 Gentil Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-proxstream2.dtsi" + +/ { + model = "UniPhier ProXstream2 Gentil Board"; + compatible = "socionext,proxstream2-gentil", "socionext,proxstream2"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + i2c0 = &i2c0; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts b/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts new file mode 100644 index 000000000000..498acac3d95d --- /dev/null +++ b/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts @@ -0,0 +1,78 @@ +/* + * Device Tree Source for UniPhier ProXstream2 Vodka Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-proxstream2.dtsi" + +/ { + model = "UniPhier ProXstream2 Vodka Board"; + compatible = "socionext,proxstream2-vodka", "socionext,proxstream2"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + i2c0 = &i2c0; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi index 4c7b24611012..259f1a909e24 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2.dtsi +++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi @@ -56,24 +56,28 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; + next-level-cache = <&l2>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; + next-level-cache = <&l2>; }; }; @@ -110,6 +114,18 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <(1280 * 1024)>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -235,10 +251,9 @@ clock-frequency = <400000>; }; - system-bus-controller-misc@59800000 { - compatible = "socionext,uniphier-system-bus-controller-misc", - "syscon"; - reg = <0x59800000 0x2000>; + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; }; pinctrl: pinctrl@5f801000 { diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index 68ca125b56ea..e5949b934945 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -52,6 +52,26 @@ pinctrl-0 = <&pinctrl_i2c0>; }; +&nfc { + assigned-clocks = <&clks VF610_CLK_NFC>; + assigned-clock-rates = <33000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + status = "okay"; + + nand@0 { + compatible = "fsl,vf610-nfc-nandcs"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <32>; + nand-ecc-step-size = <2048>; + nand-on-flash-bbt; + }; +}; + &pwm0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0>; @@ -156,6 +176,25 @@ >; }; + pinctrl_nfc: nfcgrp { + fsl,pins = < + VF610_PAD_PTD23__NF_IO7 0x28df + VF610_PAD_PTD22__NF_IO6 0x28df + VF610_PAD_PTD21__NF_IO5 0x28df + VF610_PAD_PTD20__NF_IO4 0x28df + VF610_PAD_PTD19__NF_IO3 0x28df + VF610_PAD_PTD18__NF_IO2 0x28df + VF610_PAD_PTD17__NF_IO1 0x28df + VF610_PAD_PTD16__NF_IO0 0x28df + VF610_PAD_PTB24__NF_WE_B 0x28c2 + VF610_PAD_PTB25__NF_CE0_B 0x28c2 + VF610_PAD_PTB27__NF_RE_B 0x28c2 + VF610_PAD_PTC26__NF_RB_B 0x283d + VF610_PAD_PTC27__NF_ALE 0x28c2 + VF610_PAD_PTC28__NF_CLE 0x28c2 + >; + }; + pinctrl_pwm0: pwm0grp { fsl,pins = < VF610_PAD_PTB0__FTM0_CH0 0x1182 diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts index 7fc782c4fc52..c3173fc9e833 100644 --- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts @@ -15,3 +15,8 @@ model = "Toradex Colibri VF50 on Colibri Evaluation Board"; compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500"; }; + +&touchscreen { + vf50-ts-min-pressure = <200>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index cee34a32f25b..84f091d1fcf2 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -17,4 +17,51 @@ memory { reg = <0x80000000 0x8000000>; }; + + touchscreen: vf50-touchscreen { + compatible = "toradex,vf50-touchscreen"; + io-channels = <&adc1 0>,<&adc0 0>, + <&adc0 1>,<&adc1 2>; + xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio0>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "idle","default","gpios"; + pinctrl-0 = <&pinctrl_touchctrl_idle>; + pinctrl-1 = <&pinctrl_touchctrl_default>; + pinctrl-2 = <&pinctrl_touchctrl_gpios>; + vf50-ts-min-pressure = <200>; + status = "disabled"; + }; +}; + +&iomuxc { + vf610-colibri { + pinctrl_touchctrl_idle: touchctrl_idle { + fsl,pins = < + VF610_PAD_PTA18__GPIO_8 0x006d + VF610_PAD_PTA19__GPIO_9 0x006c + >; + }; + + pinctrl_touchctrl_default: touchctrl_default { + fsl,pins = < + VF610_PAD_PTA18__ADC0_SE0 0x0040 + VF610_PAD_PTA19__ADC0_SE1 0x0040 + VF610_PAD_PTA16__ADC1_SE0 0x0040 + VF610_PAD_PTB2__ADC1_SE2 0x0040 + >; + }; + + pinctrl_touchctrl_gpios: touchctrl_gpios { + fsl,pins = < + VF610_PAD_PTA23__GPIO_13 0x22e9 + VF610_PAD_PTB23__GPIO_93 0x22e9 + VF610_PAD_PTA22__GPIO_12 0x22e9 + VF610_PAD_PTA11__GPIO_4 0x22e9 + >; + }; + }; }; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 375ab23ca743..5438ee4be2ec 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -237,6 +237,33 @@ >; }; + pinctrl_nfc: nfcgrp { + fsl,pins = < + VF610_PAD_PTD31__NF_IO15 0x28df + VF610_PAD_PTD30__NF_IO14 0x28df + VF610_PAD_PTD29__NF_IO13 0x28df + VF610_PAD_PTD28__NF_IO12 0x28df + VF610_PAD_PTD27__NF_IO11 0x28df + VF610_PAD_PTD26__NF_IO10 0x28df + VF610_PAD_PTD25__NF_IO9 0x28df + VF610_PAD_PTD24__NF_IO8 0x28df + VF610_PAD_PTD23__NF_IO7 0x28df + VF610_PAD_PTD22__NF_IO6 0x28df + VF610_PAD_PTD21__NF_IO5 0x28df + VF610_PAD_PTD20__NF_IO4 0x28df + VF610_PAD_PTD19__NF_IO3 0x28df + VF610_PAD_PTD18__NF_IO2 0x28df + VF610_PAD_PTD17__NF_IO1 0x28df + VF610_PAD_PTD16__NF_IO0 0x28df + VF610_PAD_PTB24__NF_WE_B 0x28c2 + VF610_PAD_PTB25__NF_CE0_B 0x28c2 + VF610_PAD_PTB27__NF_RE_B 0x28c2 + VF610_PAD_PTC26__NF_RB_B 0x283d + VF610_PAD_PTC27__NF_ALE 0x28c2 + VF610_PAD_PTC28__NF_CLE 0x28c2 + >; + }; + pinctrl_pwm0: pwm0grp { fsl,pins = < VF610_PAD_PTB0__FTM0_CH0 0x1582 @@ -274,6 +301,26 @@ }; }; +&nfc { + assigned-clocks = <&clks VF610_CLK_NFC>; + assigned-clock-rates = <33000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + status = "okay"; + + nand@0 { + compatible = "fsl,vf610-nfc-nandcs"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-bus-width = <16>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <24>; + nand-ecc-step-size = <2048>; + nand-on-flash-bbt; + }; +}; + &pwm0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0>; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 6865137fd114..6736bae43a5b 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -564,6 +564,17 @@ status = "disabled"; }; + nfc: nand@400e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-nfc"; + reg = <0x400e0000 0x4000>; + interrupts = <83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_NFC>; + clock-names = "nfc"; + status = "disabled"; + }; + i2c2: i2c@400e6000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/wm8750.dtsi b/arch/arm/boot/dts/wm8750.dtsi index 557a9c2ace49..46d076d7302b 100644 --- a/arch/arm/boot/dts/wm8750.dtsi +++ b/arch/arm/boot/dts/wm8750.dtsi @@ -17,7 +17,7 @@ cpu { device_type = "cpu"; - compatible = "arm,arm1176ej-s"; + compatible = "arm,arm1176jzf"; }; }; diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index c3a4e9ceba34..9353184d730d 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -17,6 +17,3 @@ config SHARP_PARAM config SHARP_SCOOP bool - -config TI_PRIV_EDMA - bool diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 6ee5959a813b..27f23b15b1ea 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -15,6 +15,5 @@ obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o CFLAGS_REMOVE_mcpm_entry.o = -pg AFLAGS_mcpm_head.o := -march=armv7-a AFLAGS_vlock.o := -march=armv7-a -obj-$(CONFIG_TI_PRIV_EDMA) += edma.o obj-$(CONFIG_BL_SWITCHER) += bL_switcher.o obj-$(CONFIG_BL_SWITCHER_DUMMY_IF) += bL_switcher_dummy_if.o diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c deleted file mode 100644 index 873dbfcc7dc9..000000000000 --- a/arch/arm/common/edma.c +++ /dev/null @@ -1,1876 +0,0 @@ -/* - * EDMA3 support for DaVinci - * - * Copyright (C) 2006-2009 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/err.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/edma.h> -#include <linux/dma-mapping.h> -#include <linux/of_address.h> -#include <linux/of_device.h> -#include <linux/of_dma.h> -#include <linux/of_irq.h> -#include <linux/pm_runtime.h> - -#include <linux/platform_data/edma.h> - -/* Offsets matching "struct edmacc_param" */ -#define PARM_OPT 0x00 -#define PARM_SRC 0x04 -#define PARM_A_B_CNT 0x08 -#define PARM_DST 0x0c -#define PARM_SRC_DST_BIDX 0x10 -#define PARM_LINK_BCNTRLD 0x14 -#define PARM_SRC_DST_CIDX 0x18 -#define PARM_CCNT 0x1c - -#define PARM_SIZE 0x20 - -/* Offsets for EDMA CC global channel registers and their shadows */ -#define SH_ER 0x00 /* 64 bits */ -#define SH_ECR 0x08 /* 64 bits */ -#define SH_ESR 0x10 /* 64 bits */ -#define SH_CER 0x18 /* 64 bits */ -#define SH_EER 0x20 /* 64 bits */ -#define SH_EECR 0x28 /* 64 bits */ -#define SH_EESR 0x30 /* 64 bits */ -#define SH_SER 0x38 /* 64 bits */ -#define SH_SECR 0x40 /* 64 bits */ -#define SH_IER 0x50 /* 64 bits */ -#define SH_IECR 0x58 /* 64 bits */ -#define SH_IESR 0x60 /* 64 bits */ -#define SH_IPR 0x68 /* 64 bits */ -#define SH_ICR 0x70 /* 64 bits */ -#define SH_IEVAL 0x78 -#define SH_QER 0x80 -#define SH_QEER 0x84 -#define SH_QEECR 0x88 -#define SH_QEESR 0x8c -#define SH_QSER 0x90 -#define SH_QSECR 0x94 -#define SH_SIZE 0x200 - -/* Offsets for EDMA CC global registers */ -#define EDMA_REV 0x0000 -#define EDMA_CCCFG 0x0004 -#define EDMA_QCHMAP 0x0200 /* 8 registers */ -#define EDMA_DMAQNUM 0x0240 /* 8 registers (4 on OMAP-L1xx) */ -#define EDMA_QDMAQNUM 0x0260 -#define EDMA_QUETCMAP 0x0280 -#define EDMA_QUEPRI 0x0284 -#define EDMA_EMR 0x0300 /* 64 bits */ -#define EDMA_EMCR 0x0308 /* 64 bits */ -#define EDMA_QEMR 0x0310 -#define EDMA_QEMCR 0x0314 -#define EDMA_CCERR 0x0318 -#define EDMA_CCERRCLR 0x031c -#define EDMA_EEVAL 0x0320 -#define EDMA_DRAE 0x0340 /* 4 x 64 bits*/ -#define EDMA_QRAE 0x0380 /* 4 registers */ -#define EDMA_QUEEVTENTRY 0x0400 /* 2 x 16 registers */ -#define EDMA_QSTAT 0x0600 /* 2 registers */ -#define EDMA_QWMTHRA 0x0620 -#define EDMA_QWMTHRB 0x0624 -#define EDMA_CCSTAT 0x0640 - -#define EDMA_M 0x1000 /* global channel registers */ -#define EDMA_ECR 0x1008 -#define EDMA_ECRH 0x100C -#define EDMA_SHADOW0 0x2000 /* 4 regions shadowing global channels */ -#define EDMA_PARM 0x4000 /* 128 param entries */ - -#define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5)) - -#define EDMA_DCHMAP 0x0100 /* 64 registers */ - -/* CCCFG register */ -#define GET_NUM_DMACH(x) (x & 0x7) /* bits 0-2 */ -#define GET_NUM_PAENTRY(x) ((x & 0x7000) >> 12) /* bits 12-14 */ -#define GET_NUM_EVQUE(x) ((x & 0x70000) >> 16) /* bits 16-18 */ -#define GET_NUM_REGN(x) ((x & 0x300000) >> 20) /* bits 20-21 */ -#define CHMAP_EXIST BIT(24) - -#define EDMA_MAX_DMACH 64 -#define EDMA_MAX_PARAMENTRY 512 - -/*****************************************************************************/ - -static void __iomem *edmacc_regs_base[EDMA_MAX_CC]; - -static inline unsigned int edma_read(unsigned ctlr, int offset) -{ - return (unsigned int)__raw_readl(edmacc_regs_base[ctlr] + offset); -} - -static inline void edma_write(unsigned ctlr, int offset, int val) -{ - __raw_writel(val, edmacc_regs_base[ctlr] + offset); -} -static inline void edma_modify(unsigned ctlr, int offset, unsigned and, - unsigned or) -{ - unsigned val = edma_read(ctlr, offset); - val &= and; - val |= or; - edma_write(ctlr, offset, val); -} -static inline void edma_and(unsigned ctlr, int offset, unsigned and) -{ - unsigned val = edma_read(ctlr, offset); - val &= and; - edma_write(ctlr, offset, val); -} -static inline void edma_or(unsigned ctlr, int offset, unsigned or) -{ - unsigned val = edma_read(ctlr, offset); - val |= or; - edma_write(ctlr, offset, val); -} -static inline unsigned int edma_read_array(unsigned ctlr, int offset, int i) -{ - return edma_read(ctlr, offset + (i << 2)); -} -static inline void edma_write_array(unsigned ctlr, int offset, int i, - unsigned val) -{ - edma_write(ctlr, offset + (i << 2), val); -} -static inline void edma_modify_array(unsigned ctlr, int offset, int i, - unsigned and, unsigned or) -{ - edma_modify(ctlr, offset + (i << 2), and, or); -} -static inline void edma_or_array(unsigned ctlr, int offset, int i, unsigned or) -{ - edma_or(ctlr, offset + (i << 2), or); -} -static inline void edma_or_array2(unsigned ctlr, int offset, int i, int j, - unsigned or) -{ - edma_or(ctlr, offset + ((i*2 + j) << 2), or); -} -static inline void edma_write_array2(unsigned ctlr, int offset, int i, int j, - unsigned val) -{ - edma_write(ctlr, offset + ((i*2 + j) << 2), val); -} -static inline unsigned int edma_shadow0_read(unsigned ctlr, int offset) -{ - return edma_read(ctlr, EDMA_SHADOW0 + offset); -} -static inline unsigned int edma_shadow0_read_array(unsigned ctlr, int offset, - int i) -{ - return edma_read(ctlr, EDMA_SHADOW0 + offset + (i << 2)); -} -static inline void edma_shadow0_write(unsigned ctlr, int offset, unsigned val) -{ - edma_write(ctlr, EDMA_SHADOW0 + offset, val); -} -static inline void edma_shadow0_write_array(unsigned ctlr, int offset, int i, - unsigned val) -{ - edma_write(ctlr, EDMA_SHADOW0 + offset + (i << 2), val); -} -static inline unsigned int edma_parm_read(unsigned ctlr, int offset, - int param_no) -{ - return edma_read(ctlr, EDMA_PARM + offset + (param_no << 5)); -} -static inline void edma_parm_write(unsigned ctlr, int offset, int param_no, - unsigned val) -{ - edma_write(ctlr, EDMA_PARM + offset + (param_no << 5), val); -} -static inline void edma_parm_modify(unsigned ctlr, int offset, int param_no, - unsigned and, unsigned or) -{ - edma_modify(ctlr, EDMA_PARM + offset + (param_no << 5), and, or); -} -static inline void edma_parm_and(unsigned ctlr, int offset, int param_no, - unsigned and) -{ - edma_and(ctlr, EDMA_PARM + offset + (param_no << 5), and); -} -static inline void edma_parm_or(unsigned ctlr, int offset, int param_no, - unsigned or) -{ - edma_or(ctlr, EDMA_PARM + offset + (param_no << 5), or); -} - -static inline void set_bits(int offset, int len, unsigned long *p) -{ - for (; len > 0; len--) - set_bit(offset + (len - 1), p); -} - -static inline void clear_bits(int offset, int len, unsigned long *p) -{ - for (; len > 0; len--) - clear_bit(offset + (len - 1), p); -} - -/*****************************************************************************/ - -/* actual number of DMA channels and slots on this silicon */ -struct edma { - /* how many dma resources of each type */ - unsigned num_channels; - unsigned num_region; - unsigned num_slots; - unsigned num_tc; - enum dma_event_q default_queue; - - /* list of channels with no even trigger; terminated by "-1" */ - const s8 *noevent; - - struct edma_soc_info *info; - - /* The edma_inuse bit for each PaRAM slot is clear unless the - * channel is in use ... by ARM or DSP, for QDMA, or whatever. - */ - DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY); - - /* The edma_unused bit for each channel is clear unless - * it is not being used on this platform. It uses a bit - * of SOC-specific initialization code. - */ - DECLARE_BITMAP(edma_unused, EDMA_MAX_DMACH); - - unsigned irq_res_start; - unsigned irq_res_end; - - struct dma_interrupt_data { - void (*callback)(unsigned channel, unsigned short ch_status, - void *data); - void *data; - } intr_data[EDMA_MAX_DMACH]; -}; - -static struct edma *edma_cc[EDMA_MAX_CC]; -static int arch_num_cc; - -/* dummy param set used to (re)initialize parameter RAM slots */ -static const struct edmacc_param dummy_paramset = { - .link_bcntrld = 0xffff, - .ccnt = 1, -}; - -static const struct of_device_id edma_of_ids[] = { - { .compatible = "ti,edma3", }, - {} -}; - -/*****************************************************************************/ - -static void map_dmach_queue(unsigned ctlr, unsigned ch_no, - enum dma_event_q queue_no) -{ - int bit = (ch_no & 0x7) * 4; - - /* default to low priority queue */ - if (queue_no == EVENTQ_DEFAULT) - queue_no = edma_cc[ctlr]->default_queue; - - queue_no &= 7; - edma_modify_array(ctlr, EDMA_DMAQNUM, (ch_no >> 3), - ~(0x7 << bit), queue_no << bit); -} - -static void assign_priority_to_queue(unsigned ctlr, int queue_no, - int priority) -{ - int bit = queue_no * 4; - edma_modify(ctlr, EDMA_QUEPRI, ~(0x7 << bit), - ((priority & 0x7) << bit)); -} - -/** - * map_dmach_param - Maps channel number to param entry number - * - * This maps the dma channel number to param entry numberter. In - * other words using the DMA channel mapping registers a param entry - * can be mapped to any channel - * - * Callers are responsible for ensuring the channel mapping logic is - * included in that particular EDMA variant (Eg : dm646x) - * - */ -static void map_dmach_param(unsigned ctlr) -{ - int i; - for (i = 0; i < EDMA_MAX_DMACH; i++) - edma_write_array(ctlr, EDMA_DCHMAP , i , (i << 5)); -} - -static inline void -setup_dma_interrupt(unsigned lch, - void (*callback)(unsigned channel, u16 ch_status, void *data), - void *data) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(lch); - lch = EDMA_CHAN_SLOT(lch); - - if (!callback) - edma_shadow0_write_array(ctlr, SH_IECR, lch >> 5, - BIT(lch & 0x1f)); - - edma_cc[ctlr]->intr_data[lch].callback = callback; - edma_cc[ctlr]->intr_data[lch].data = data; - - if (callback) { - edma_shadow0_write_array(ctlr, SH_ICR, lch >> 5, - BIT(lch & 0x1f)); - edma_shadow0_write_array(ctlr, SH_IESR, lch >> 5, - BIT(lch & 0x1f)); - } -} - -static int irq2ctlr(int irq) -{ - if (irq >= edma_cc[0]->irq_res_start && irq <= edma_cc[0]->irq_res_end) - return 0; - else if (irq >= edma_cc[1]->irq_res_start && - irq <= edma_cc[1]->irq_res_end) - return 1; - - return -1; -} - -/****************************************************************************** - * - * DMA interrupt handler - * - *****************************************************************************/ -static irqreturn_t dma_irq_handler(int irq, void *data) -{ - int ctlr; - u32 sh_ier; - u32 sh_ipr; - u32 bank; - - ctlr = irq2ctlr(irq); - if (ctlr < 0) - return IRQ_NONE; - - dev_dbg(data, "dma_irq_handler\n"); - - sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 0); - if (!sh_ipr) { - sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 1); - if (!sh_ipr) - return IRQ_NONE; - sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 1); - bank = 1; - } else { - sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 0); - bank = 0; - } - - do { - u32 slot; - u32 channel; - - dev_dbg(data, "IPR%d %08x\n", bank, sh_ipr); - - slot = __ffs(sh_ipr); - sh_ipr &= ~(BIT(slot)); - - if (sh_ier & BIT(slot)) { - channel = (bank << 5) | slot; - /* Clear the corresponding IPR bits */ - edma_shadow0_write_array(ctlr, SH_ICR, bank, - BIT(slot)); - if (edma_cc[ctlr]->intr_data[channel].callback) - edma_cc[ctlr]->intr_data[channel].callback( - channel, EDMA_DMA_COMPLETE, - edma_cc[ctlr]->intr_data[channel].data); - } - } while (sh_ipr); - - edma_shadow0_write(ctlr, SH_IEVAL, 1); - return IRQ_HANDLED; -} - -/****************************************************************************** - * - * DMA error interrupt handler - * - *****************************************************************************/ -static irqreturn_t dma_ccerr_handler(int irq, void *data) -{ - int i; - int ctlr; - unsigned int cnt = 0; - - ctlr = irq2ctlr(irq); - if (ctlr < 0) - return IRQ_NONE; - - dev_dbg(data, "dma_ccerr_handler\n"); - - if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) && - (edma_read_array(ctlr, EDMA_EMR, 1) == 0) && - (edma_read(ctlr, EDMA_QEMR) == 0) && - (edma_read(ctlr, EDMA_CCERR) == 0)) - return IRQ_NONE; - - while (1) { - int j = -1; - if (edma_read_array(ctlr, EDMA_EMR, 0)) - j = 0; - else if (edma_read_array(ctlr, EDMA_EMR, 1)) - j = 1; - if (j >= 0) { - dev_dbg(data, "EMR%d %08x\n", j, - edma_read_array(ctlr, EDMA_EMR, j)); - for (i = 0; i < 32; i++) { - int k = (j << 5) + i; - if (edma_read_array(ctlr, EDMA_EMR, j) & - BIT(i)) { - /* Clear the corresponding EMR bits */ - edma_write_array(ctlr, EDMA_EMCR, j, - BIT(i)); - /* Clear any SER */ - edma_shadow0_write_array(ctlr, SH_SECR, - j, BIT(i)); - if (edma_cc[ctlr]->intr_data[k]. - callback) { - edma_cc[ctlr]->intr_data[k]. - callback(k, - EDMA_DMA_CC_ERROR, - edma_cc[ctlr]->intr_data - [k].data); - } - } - } - } else if (edma_read(ctlr, EDMA_QEMR)) { - dev_dbg(data, "QEMR %02x\n", - edma_read(ctlr, EDMA_QEMR)); - for (i = 0; i < 8; i++) { - if (edma_read(ctlr, EDMA_QEMR) & BIT(i)) { - /* Clear the corresponding IPR bits */ - edma_write(ctlr, EDMA_QEMCR, BIT(i)); - edma_shadow0_write(ctlr, SH_QSECR, - BIT(i)); - - /* NOTE: not reported!! */ - } - } - } else if (edma_read(ctlr, EDMA_CCERR)) { - dev_dbg(data, "CCERR %08x\n", - edma_read(ctlr, EDMA_CCERR)); - /* FIXME: CCERR.BIT(16) ignored! much better - * to just write CCERRCLR with CCERR value... - */ - for (i = 0; i < 8; i++) { - if (edma_read(ctlr, EDMA_CCERR) & BIT(i)) { - /* Clear the corresponding IPR bits */ - edma_write(ctlr, EDMA_CCERRCLR, BIT(i)); - - /* NOTE: not reported!! */ - } - } - } - if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) && - (edma_read_array(ctlr, EDMA_EMR, 1) == 0) && - (edma_read(ctlr, EDMA_QEMR) == 0) && - (edma_read(ctlr, EDMA_CCERR) == 0)) - break; - cnt++; - if (cnt > 10) - break; - } - edma_write(ctlr, EDMA_EEVAL, 1); - return IRQ_HANDLED; -} - -static int reserve_contiguous_slots(int ctlr, unsigned int id, - unsigned int num_slots, - unsigned int start_slot) -{ - int i, j; - unsigned int count = num_slots; - int stop_slot = start_slot; - DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY); - - for (i = start_slot; i < edma_cc[ctlr]->num_slots; ++i) { - j = EDMA_CHAN_SLOT(i); - if (!test_and_set_bit(j, edma_cc[ctlr]->edma_inuse)) { - /* Record our current beginning slot */ - if (count == num_slots) - stop_slot = i; - - count--; - set_bit(j, tmp_inuse); - - if (count == 0) - break; - } else { - clear_bit(j, tmp_inuse); - - if (id == EDMA_CONT_PARAMS_FIXED_EXACT) { - stop_slot = i; - break; - } else { - count = num_slots; - } - } - } - - /* - * We have to clear any bits that we set - * if we run out parameter RAM slots, i.e we do find a set - * of contiguous parameter RAM slots but do not find the exact number - * requested as we may reach the total number of parameter RAM slots - */ - if (i == edma_cc[ctlr]->num_slots) - stop_slot = i; - - j = start_slot; - for_each_set_bit_from(j, tmp_inuse, stop_slot) - clear_bit(j, edma_cc[ctlr]->edma_inuse); - - if (count) - return -EBUSY; - - for (j = i - num_slots + 1; j <= i; ++j) - memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j), - &dummy_paramset, PARM_SIZE); - - return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1); -} - -static int prepare_unused_channel_list(struct device *dev, void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - int i, count, ctlr; - struct of_phandle_args dma_spec; - - if (dev->of_node) { - count = of_property_count_strings(dev->of_node, "dma-names"); - if (count < 0) - return 0; - for (i = 0; i < count; i++) { - if (of_parse_phandle_with_args(dev->of_node, "dmas", - "#dma-cells", i, - &dma_spec)) - continue; - - if (!of_match_node(edma_of_ids, dma_spec.np)) { - of_node_put(dma_spec.np); - continue; - } - - clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]), - edma_cc[0]->edma_unused); - of_node_put(dma_spec.np); - } - return 0; - } - - /* For non-OF case */ - for (i = 0; i < pdev->num_resources; i++) { - if ((pdev->resource[i].flags & IORESOURCE_DMA) && - (int)pdev->resource[i].start >= 0) { - ctlr = EDMA_CTLR(pdev->resource[i].start); - clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start), - edma_cc[ctlr]->edma_unused); - } - } - - return 0; -} - -/*-----------------------------------------------------------------------*/ - -static bool unused_chan_list_done; - -/* Resource alloc/free: dma channels, parameter RAM slots */ - -/** - * edma_alloc_channel - allocate DMA channel and paired parameter RAM - * @channel: specific channel to allocate; negative for "any unmapped channel" - * @callback: optional; to be issued on DMA completion or errors - * @data: passed to callback - * @eventq_no: an EVENTQ_* constant, used to choose which Transfer - * Controller (TC) executes requests using this channel. Use - * EVENTQ_DEFAULT unless you really need a high priority queue. - * - * This allocates a DMA channel and its associated parameter RAM slot. - * The parameter RAM is initialized to hold a dummy transfer. - * - * Normal use is to pass a specific channel number as @channel, to make - * use of hardware events mapped to that channel. When the channel will - * be used only for software triggering or event chaining, channels not - * mapped to hardware events (or mapped to unused events) are preferable. - * - * DMA transfers start from a channel using edma_start(), or by - * chaining. When the transfer described in that channel's parameter RAM - * slot completes, that slot's data may be reloaded through a link. - * - * DMA errors are only reported to the @callback associated with the - * channel driving that transfer, but transfer completion callbacks can - * be sent to another channel under control of the TCC field in - * the option word of the transfer's parameter RAM set. Drivers must not - * use DMA transfer completion callbacks for channels they did not allocate. - * (The same applies to TCC codes used in transfer chaining.) - * - * Returns the number of the channel, else negative errno. - */ -int edma_alloc_channel(int channel, - void (*callback)(unsigned channel, u16 ch_status, void *data), - void *data, - enum dma_event_q eventq_no) -{ - unsigned i, done = 0, ctlr = 0; - int ret = 0; - - if (!unused_chan_list_done) { - /* - * Scan all the platform devices to find out the EDMA channels - * used and clear them in the unused list, making the rest - * available for ARM usage. - */ - ret = bus_for_each_dev(&platform_bus_type, NULL, NULL, - prepare_unused_channel_list); - if (ret < 0) - return ret; - - unused_chan_list_done = true; - } - - if (channel >= 0) { - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - } - - if (channel < 0) { - for (i = 0; i < arch_num_cc; i++) { - channel = 0; - for (;;) { - channel = find_next_bit(edma_cc[i]->edma_unused, - edma_cc[i]->num_channels, - channel); - if (channel == edma_cc[i]->num_channels) - break; - if (!test_and_set_bit(channel, - edma_cc[i]->edma_inuse)) { - done = 1; - ctlr = i; - break; - } - channel++; - } - if (done) - break; - } - if (!done) - return -ENOMEM; - } else if (channel >= edma_cc[ctlr]->num_channels) { - return -EINVAL; - } else if (test_and_set_bit(channel, edma_cc[ctlr]->edma_inuse)) { - return -EBUSY; - } - - /* ensure access through shadow region 0 */ - edma_or_array2(ctlr, EDMA_DRAE, 0, channel >> 5, BIT(channel & 0x1f)); - - /* ensure no events are pending */ - edma_stop(EDMA_CTLR_CHAN(ctlr, channel)); - memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel), - &dummy_paramset, PARM_SIZE); - - if (callback) - setup_dma_interrupt(EDMA_CTLR_CHAN(ctlr, channel), - callback, data); - - map_dmach_queue(ctlr, channel, eventq_no); - - return EDMA_CTLR_CHAN(ctlr, channel); -} -EXPORT_SYMBOL(edma_alloc_channel); - - -/** - * edma_free_channel - deallocate DMA channel - * @channel: dma channel returned from edma_alloc_channel() - * - * This deallocates the DMA channel and associated parameter RAM slot - * allocated by edma_alloc_channel(). - * - * Callers are responsible for ensuring the channel is inactive, and - * will not be reactivated by linking, chaining, or software calls to - * edma_start(). - */ -void edma_free_channel(unsigned channel) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - - if (channel >= edma_cc[ctlr]->num_channels) - return; - - setup_dma_interrupt(channel, NULL, NULL); - /* REVISIT should probably take out of shadow region 0 */ - - memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel), - &dummy_paramset, PARM_SIZE); - clear_bit(channel, edma_cc[ctlr]->edma_inuse); -} -EXPORT_SYMBOL(edma_free_channel); - -/** - * edma_alloc_slot - allocate DMA parameter RAM - * @slot: specific slot to allocate; negative for "any unused slot" - * - * This allocates a parameter RAM slot, initializing it to hold a - * dummy transfer. Slots allocated using this routine have not been - * mapped to a hardware DMA channel, and will normally be used by - * linking to them from a slot associated with a DMA channel. - * - * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific - * slots may be allocated on behalf of DSP firmware. - * - * Returns the number of the slot, else negative errno. - */ -int edma_alloc_slot(unsigned ctlr, int slot) -{ - if (!edma_cc[ctlr]) - return -EINVAL; - - if (slot >= 0) - slot = EDMA_CHAN_SLOT(slot); - - if (slot < 0) { - slot = edma_cc[ctlr]->num_channels; - for (;;) { - slot = find_next_zero_bit(edma_cc[ctlr]->edma_inuse, - edma_cc[ctlr]->num_slots, slot); - if (slot == edma_cc[ctlr]->num_slots) - return -ENOMEM; - if (!test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse)) - break; - } - } else if (slot < edma_cc[ctlr]->num_channels || - slot >= edma_cc[ctlr]->num_slots) { - return -EINVAL; - } else if (test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse)) { - return -EBUSY; - } - - memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), - &dummy_paramset, PARM_SIZE); - - return EDMA_CTLR_CHAN(ctlr, slot); -} -EXPORT_SYMBOL(edma_alloc_slot); - -/** - * edma_free_slot - deallocate DMA parameter RAM - * @slot: parameter RAM slot returned from edma_alloc_slot() - * - * This deallocates the parameter RAM slot allocated by edma_alloc_slot(). - * Callers are responsible for ensuring the slot is inactive, and will - * not be activated. - */ -void edma_free_slot(unsigned slot) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(slot); - slot = EDMA_CHAN_SLOT(slot); - - if (slot < edma_cc[ctlr]->num_channels || - slot >= edma_cc[ctlr]->num_slots) - return; - - memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), - &dummy_paramset, PARM_SIZE); - clear_bit(slot, edma_cc[ctlr]->edma_inuse); -} -EXPORT_SYMBOL(edma_free_slot); - - -/** - * edma_alloc_cont_slots- alloc contiguous parameter RAM slots - * The API will return the starting point of a set of - * contiguous parameter RAM slots that have been requested - * - * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT - * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT - * @count: number of contiguous Paramter RAM slots - * @slot - the start value of Parameter RAM slot that should be passed if id - * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT - * - * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of - * contiguous Parameter RAM slots from parameter RAM 64 in the case of - * DaVinci SOCs and 32 in the case of DA8xx SOCs. - * - * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a - * set of contiguous parameter RAM slots from the "slot" that is passed as an - * argument to the API. - * - * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries - * starts looking for a set of contiguous parameter RAMs from the "slot" - * that is passed as an argument to the API. On failure the API will try to - * find a set of contiguous Parameter RAM slots from the remaining Parameter - * RAM slots - */ -int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count) -{ - /* - * The start slot requested should be greater than - * the number of channels and lesser than the total number - * of slots - */ - if ((id != EDMA_CONT_PARAMS_ANY) && - (slot < edma_cc[ctlr]->num_channels || - slot >= edma_cc[ctlr]->num_slots)) - return -EINVAL; - - /* - * The number of parameter RAM slots requested cannot be less than 1 - * and cannot be more than the number of slots minus the number of - * channels - */ - if (count < 1 || count > - (edma_cc[ctlr]->num_slots - edma_cc[ctlr]->num_channels)) - return -EINVAL; - - switch (id) { - case EDMA_CONT_PARAMS_ANY: - return reserve_contiguous_slots(ctlr, id, count, - edma_cc[ctlr]->num_channels); - case EDMA_CONT_PARAMS_FIXED_EXACT: - case EDMA_CONT_PARAMS_FIXED_NOT_EXACT: - return reserve_contiguous_slots(ctlr, id, count, slot); - default: - return -EINVAL; - } - -} -EXPORT_SYMBOL(edma_alloc_cont_slots); - -/** - * edma_free_cont_slots - deallocate DMA parameter RAM slots - * @slot: first parameter RAM of a set of parameter RAM slots to be freed - * @count: the number of contiguous parameter RAM slots to be freed - * - * This deallocates the parameter RAM slots allocated by - * edma_alloc_cont_slots. - * Callers/applications need to keep track of sets of contiguous - * parameter RAM slots that have been allocated using the edma_alloc_cont_slots - * API. - * Callers are responsible for ensuring the slots are inactive, and will - * not be activated. - */ -int edma_free_cont_slots(unsigned slot, int count) -{ - unsigned ctlr, slot_to_free; - int i; - - ctlr = EDMA_CTLR(slot); - slot = EDMA_CHAN_SLOT(slot); - - if (slot < edma_cc[ctlr]->num_channels || - slot >= edma_cc[ctlr]->num_slots || - count < 1) - return -EINVAL; - - for (i = slot; i < slot + count; ++i) { - ctlr = EDMA_CTLR(i); - slot_to_free = EDMA_CHAN_SLOT(i); - - memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free), - &dummy_paramset, PARM_SIZE); - clear_bit(slot_to_free, edma_cc[ctlr]->edma_inuse); - } - - return 0; -} -EXPORT_SYMBOL(edma_free_cont_slots); - -/*-----------------------------------------------------------------------*/ - -/* Parameter RAM operations (i) -- read/write partial slots */ - -/** - * edma_set_src - set initial DMA source address in parameter RAM slot - * @slot: parameter RAM slot being configured - * @src_port: physical address of source (memory, controller FIFO, etc) - * @addressMode: INCR, except in very rare cases - * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the - * width to use when addressing the fifo (e.g. W8BIT, W32BIT) - * - * Note that the source address is modified during the DMA transfer - * according to edma_set_src_index(). - */ -void edma_set_src(unsigned slot, dma_addr_t src_port, - enum address_mode mode, enum fifo_width width) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(slot); - slot = EDMA_CHAN_SLOT(slot); - - if (slot < edma_cc[ctlr]->num_slots) { - unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot); - - if (mode) { - /* set SAM and program FWID */ - i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8)); - } else { - /* clear SAM */ - i &= ~SAM; - } - edma_parm_write(ctlr, PARM_OPT, slot, i); - - /* set the source port address - in source register of param structure */ - edma_parm_write(ctlr, PARM_SRC, slot, src_port); - } -} -EXPORT_SYMBOL(edma_set_src); - -/** - * edma_set_dest - set initial DMA destination address in parameter RAM slot - * @slot: parameter RAM slot being configured - * @dest_port: physical address of destination (memory, controller FIFO, etc) - * @addressMode: INCR, except in very rare cases - * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the - * width to use when addressing the fifo (e.g. W8BIT, W32BIT) - * - * Note that the destination address is modified during the DMA transfer - * according to edma_set_dest_index(). - */ -void edma_set_dest(unsigned slot, dma_addr_t dest_port, - enum address_mode mode, enum fifo_width width) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(slot); - slot = EDMA_CHAN_SLOT(slot); - - if (slot < edma_cc[ctlr]->num_slots) { - unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot); - - if (mode) { - /* set DAM and program FWID */ - i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8)); - } else { - /* clear DAM */ - i &= ~DAM; - } - edma_parm_write(ctlr, PARM_OPT, slot, i); - /* set the destination port address - in dest register of param structure */ - edma_parm_write(ctlr, PARM_DST, slot, dest_port); - } -} -EXPORT_SYMBOL(edma_set_dest); - -/** - * edma_get_position - returns the current transfer point - * @slot: parameter RAM slot being examined - * @dst: true selects the dest position, false the source - * - * Returns the position of the current active slot - */ -dma_addr_t edma_get_position(unsigned slot, bool dst) -{ - u32 offs, ctlr = EDMA_CTLR(slot); - - slot = EDMA_CHAN_SLOT(slot); - - offs = PARM_OFFSET(slot); - offs += dst ? PARM_DST : PARM_SRC; - - return edma_read(ctlr, offs); -} - -/** - * edma_set_src_index - configure DMA source address indexing - * @slot: parameter RAM slot being configured - * @src_bidx: byte offset between source arrays in a frame - * @src_cidx: byte offset between source frames in a block - * - * Offsets are specified to support either contiguous or discontiguous - * memory transfers, or repeated access to a hardware register, as needed. - * When accessing hardware registers, both offsets are normally zero. - */ -void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(slot); - slot = EDMA_CHAN_SLOT(slot); - - if (slot < edma_cc[ctlr]->num_slots) { - edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot, - 0xffff0000, src_bidx); - edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot, - 0xffff0000, src_cidx); - } -} -EXPORT_SYMBOL(edma_set_src_index); - -/** - * edma_set_dest_index - configure DMA destination address indexing - * @slot: parameter RAM slot being configured - * @dest_bidx: byte offset between destination arrays in a frame - * @dest_cidx: byte offset between destination frames in a block - * - * Offsets are specified to support either contiguous or discontiguous - * memory transfers, or repeated access to a hardware register, as needed. - * When accessing hardware registers, both offsets are normally zero. - */ -void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(slot); - slot = EDMA_CHAN_SLOT(slot); - - if (slot < edma_cc[ctlr]->num_slots) { - edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot, - 0x0000ffff, dest_bidx << 16); - edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot, - 0x0000ffff, dest_cidx << 16); - } -} -EXPORT_SYMBOL(edma_set_dest_index); - -/** - * edma_set_transfer_params - configure DMA transfer parameters - * @slot: parameter RAM slot being configured - * @acnt: how many bytes per array (at least one) - * @bcnt: how many arrays per frame (at least one) - * @ccnt: how many frames per block (at least one) - * @bcnt_rld: used only for A-Synchronized transfers; this specifies - * the value to reload into bcnt when it decrements to zero - * @sync_mode: ASYNC or ABSYNC - * - * See the EDMA3 documentation to understand how to configure and link - * transfers using the fields in PaRAM slots. If you are not doing it - * all at once with edma_write_slot(), you will use this routine - * plus two calls each for source and destination, setting the initial - * address and saying how to index that address. - * - * An example of an A-Synchronized transfer is a serial link using a - * single word shift register. In that case, @acnt would be equal to - * that word size; the serial controller issues a DMA synchronization - * event to transfer each word, and memory access by the DMA transfer - * controller will be word-at-a-time. - * - * An example of an AB-Synchronized transfer is a device using a FIFO. - * In that case, @acnt equals the FIFO width and @bcnt equals its depth. - * The controller with the FIFO issues DMA synchronization events when - * the FIFO threshold is reached, and the DMA transfer controller will - * transfer one frame to (or from) the FIFO. It will probably use - * efficient burst modes to access memory. - */ -void edma_set_transfer_params(unsigned slot, - u16 acnt, u16 bcnt, u16 ccnt, - u16 bcnt_rld, enum sync_dimension sync_mode) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(slot); - slot = EDMA_CHAN_SLOT(slot); - - if (slot < edma_cc[ctlr]->num_slots) { - edma_parm_modify(ctlr, PARM_LINK_BCNTRLD, slot, - 0x0000ffff, bcnt_rld << 16); - if (sync_mode == ASYNC) - edma_parm_and(ctlr, PARM_OPT, slot, ~SYNCDIM); - else - edma_parm_or(ctlr, PARM_OPT, slot, SYNCDIM); - /* Set the acount, bcount, ccount registers */ - edma_parm_write(ctlr, PARM_A_B_CNT, slot, (bcnt << 16) | acnt); - edma_parm_write(ctlr, PARM_CCNT, slot, ccnt); - } -} -EXPORT_SYMBOL(edma_set_transfer_params); - -/** - * edma_link - link one parameter RAM slot to another - * @from: parameter RAM slot originating the link - * @to: parameter RAM slot which is the link target - * - * The originating slot should not be part of any active DMA transfer. - */ -void edma_link(unsigned from, unsigned to) -{ - unsigned ctlr_from, ctlr_to; - - ctlr_from = EDMA_CTLR(from); - from = EDMA_CHAN_SLOT(from); - ctlr_to = EDMA_CTLR(to); - to = EDMA_CHAN_SLOT(to); - - if (from >= edma_cc[ctlr_from]->num_slots) - return; - if (to >= edma_cc[ctlr_to]->num_slots) - return; - edma_parm_modify(ctlr_from, PARM_LINK_BCNTRLD, from, 0xffff0000, - PARM_OFFSET(to)); -} -EXPORT_SYMBOL(edma_link); - -/** - * edma_unlink - cut link from one parameter RAM slot - * @from: parameter RAM slot originating the link - * - * The originating slot should not be part of any active DMA transfer. - * Its link is set to 0xffff. - */ -void edma_unlink(unsigned from) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(from); - from = EDMA_CHAN_SLOT(from); - - if (from >= edma_cc[ctlr]->num_slots) - return; - edma_parm_or(ctlr, PARM_LINK_BCNTRLD, from, 0xffff); -} -EXPORT_SYMBOL(edma_unlink); - -/*-----------------------------------------------------------------------*/ - -/* Parameter RAM operations (ii) -- read/write whole parameter sets */ - -/** - * edma_write_slot - write parameter RAM data for slot - * @slot: number of parameter RAM slot being modified - * @param: data to be written into parameter RAM slot - * - * Use this to assign all parameters of a transfer at once. This - * allows more efficient setup of transfers than issuing multiple - * calls to set up those parameters in small pieces, and provides - * complete control over all transfer options. - */ -void edma_write_slot(unsigned slot, const struct edmacc_param *param) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(slot); - slot = EDMA_CHAN_SLOT(slot); - - if (slot >= edma_cc[ctlr]->num_slots) - return; - memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), param, - PARM_SIZE); -} -EXPORT_SYMBOL(edma_write_slot); - -/** - * edma_read_slot - read parameter RAM data from slot - * @slot: number of parameter RAM slot being copied - * @param: where to store copy of parameter RAM data - * - * Use this to read data from a parameter RAM slot, perhaps to - * save them as a template for later reuse. - */ -void edma_read_slot(unsigned slot, struct edmacc_param *param) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(slot); - slot = EDMA_CHAN_SLOT(slot); - - if (slot >= edma_cc[ctlr]->num_slots) - return; - memcpy_fromio(param, edmacc_regs_base[ctlr] + PARM_OFFSET(slot), - PARM_SIZE); -} -EXPORT_SYMBOL(edma_read_slot); - -/*-----------------------------------------------------------------------*/ - -/* Various EDMA channel control operations */ - -/** - * edma_pause - pause dma on a channel - * @channel: on which edma_start() has been called - * - * This temporarily disables EDMA hardware events on the specified channel, - * preventing them from triggering new transfers on its behalf - */ -void edma_pause(unsigned channel) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - - if (channel < edma_cc[ctlr]->num_channels) { - unsigned int mask = BIT(channel & 0x1f); - - edma_shadow0_write_array(ctlr, SH_EECR, channel >> 5, mask); - } -} -EXPORT_SYMBOL(edma_pause); - -/** - * edma_resume - resumes dma on a paused channel - * @channel: on which edma_pause() has been called - * - * This re-enables EDMA hardware events on the specified channel. - */ -void edma_resume(unsigned channel) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - - if (channel < edma_cc[ctlr]->num_channels) { - unsigned int mask = BIT(channel & 0x1f); - - edma_shadow0_write_array(ctlr, SH_EESR, channel >> 5, mask); - } -} -EXPORT_SYMBOL(edma_resume); - -int edma_trigger_channel(unsigned channel) -{ - unsigned ctlr; - unsigned int mask; - - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - mask = BIT(channel & 0x1f); - - edma_shadow0_write_array(ctlr, SH_ESR, (channel >> 5), mask); - - pr_debug("EDMA: ESR%d %08x\n", (channel >> 5), - edma_shadow0_read_array(ctlr, SH_ESR, (channel >> 5))); - return 0; -} -EXPORT_SYMBOL(edma_trigger_channel); - -/** - * edma_start - start dma on a channel - * @channel: channel being activated - * - * Channels with event associations will be triggered by their hardware - * events, and channels without such associations will be triggered by - * software. (At this writing there is no interface for using software - * triggers except with channels that don't support hardware triggers.) - * - * Returns zero on success, else negative errno. - */ -int edma_start(unsigned channel) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - - if (channel < edma_cc[ctlr]->num_channels) { - int j = channel >> 5; - unsigned int mask = BIT(channel & 0x1f); - - /* EDMA channels without event association */ - if (test_bit(channel, edma_cc[ctlr]->edma_unused)) { - pr_debug("EDMA: ESR%d %08x\n", j, - edma_shadow0_read_array(ctlr, SH_ESR, j)); - edma_shadow0_write_array(ctlr, SH_ESR, j, mask); - return 0; - } - - /* EDMA channel with event association */ - pr_debug("EDMA: ER%d %08x\n", j, - edma_shadow0_read_array(ctlr, SH_ER, j)); - /* Clear any pending event or error */ - edma_write_array(ctlr, EDMA_ECR, j, mask); - edma_write_array(ctlr, EDMA_EMCR, j, mask); - /* Clear any SER */ - edma_shadow0_write_array(ctlr, SH_SECR, j, mask); - edma_shadow0_write_array(ctlr, SH_EESR, j, mask); - pr_debug("EDMA: EER%d %08x\n", j, - edma_shadow0_read_array(ctlr, SH_EER, j)); - return 0; - } - - return -EINVAL; -} -EXPORT_SYMBOL(edma_start); - -/** - * edma_stop - stops dma on the channel passed - * @channel: channel being deactivated - * - * When @lch is a channel, any active transfer is paused and - * all pending hardware events are cleared. The current transfer - * may not be resumed, and the channel's Parameter RAM should be - * reinitialized before being reused. - */ -void edma_stop(unsigned channel) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - - if (channel < edma_cc[ctlr]->num_channels) { - int j = channel >> 5; - unsigned int mask = BIT(channel & 0x1f); - - edma_shadow0_write_array(ctlr, SH_EECR, j, mask); - edma_shadow0_write_array(ctlr, SH_ECR, j, mask); - edma_shadow0_write_array(ctlr, SH_SECR, j, mask); - edma_write_array(ctlr, EDMA_EMCR, j, mask); - - /* clear possibly pending completion interrupt */ - edma_shadow0_write_array(ctlr, SH_ICR, j, mask); - - pr_debug("EDMA: EER%d %08x\n", j, - edma_shadow0_read_array(ctlr, SH_EER, j)); - - /* REVISIT: consider guarding against inappropriate event - * chaining by overwriting with dummy_paramset. - */ - } -} -EXPORT_SYMBOL(edma_stop); - -/****************************************************************************** - * - * It cleans ParamEntry qand bring back EDMA to initial state if media has - * been removed before EDMA has finished.It is usedful for removable media. - * Arguments: - * ch_no - channel no - * - * Return: zero on success, or corresponding error no on failure - * - * FIXME this should not be needed ... edma_stop() should suffice. - * - *****************************************************************************/ - -void edma_clean_channel(unsigned channel) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - - if (channel < edma_cc[ctlr]->num_channels) { - int j = (channel >> 5); - unsigned int mask = BIT(channel & 0x1f); - - pr_debug("EDMA: EMR%d %08x\n", j, - edma_read_array(ctlr, EDMA_EMR, j)); - edma_shadow0_write_array(ctlr, SH_ECR, j, mask); - /* Clear the corresponding EMR bits */ - edma_write_array(ctlr, EDMA_EMCR, j, mask); - /* Clear any SER */ - edma_shadow0_write_array(ctlr, SH_SECR, j, mask); - edma_write(ctlr, EDMA_CCERRCLR, BIT(16) | BIT(1) | BIT(0)); - } -} -EXPORT_SYMBOL(edma_clean_channel); - -/* - * edma_clear_event - clear an outstanding event on the DMA channel - * Arguments: - * channel - channel number - */ -void edma_clear_event(unsigned channel) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - - if (channel >= edma_cc[ctlr]->num_channels) - return; - if (channel < 32) - edma_write(ctlr, EDMA_ECR, BIT(channel)); - else - edma_write(ctlr, EDMA_ECRH, BIT(channel - 32)); -} -EXPORT_SYMBOL(edma_clear_event); - -/* - * edma_assign_channel_eventq - move given channel to desired eventq - * Arguments: - * channel - channel number - * eventq_no - queue to move the channel - * - * Can be used to move a channel to a selected event queue. - */ -void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no) -{ - unsigned ctlr; - - ctlr = EDMA_CTLR(channel); - channel = EDMA_CHAN_SLOT(channel); - - if (channel >= edma_cc[ctlr]->num_channels) - return; - - /* default to low priority queue */ - if (eventq_no == EVENTQ_DEFAULT) - eventq_no = edma_cc[ctlr]->default_queue; - if (eventq_no >= edma_cc[ctlr]->num_tc) - return; - - map_dmach_queue(ctlr, channel, eventq_no); -} -EXPORT_SYMBOL(edma_assign_channel_eventq); - -static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata, - struct edma *edma_cc, int cc_id) -{ - int i; - u32 value, cccfg; - s8 (*queue_priority_map)[2]; - - /* Decode the eDMA3 configuration from CCCFG register */ - cccfg = edma_read(cc_id, EDMA_CCCFG); - - value = GET_NUM_REGN(cccfg); - edma_cc->num_region = BIT(value); - - value = GET_NUM_DMACH(cccfg); - edma_cc->num_channels = BIT(value + 1); - - value = GET_NUM_PAENTRY(cccfg); - edma_cc->num_slots = BIT(value + 4); - - value = GET_NUM_EVQUE(cccfg); - edma_cc->num_tc = value + 1; - - dev_dbg(dev, "eDMA3 CC%d HW configuration (cccfg: 0x%08x):\n", cc_id, - cccfg); - dev_dbg(dev, "num_region: %u\n", edma_cc->num_region); - dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels); - dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots); - dev_dbg(dev, "num_tc: %u\n", edma_cc->num_tc); - - /* Nothing need to be done if queue priority is provided */ - if (pdata->queue_priority_mapping) - return 0; - - /* - * Configure TC/queue priority as follows: - * Q0 - priority 0 - * Q1 - priority 1 - * Q2 - priority 2 - * ... - * The meaning of priority numbers: 0 highest priority, 7 lowest - * priority. So Q0 is the highest priority queue and the last queue has - * the lowest priority. - */ - queue_priority_map = devm_kzalloc(dev, - (edma_cc->num_tc + 1) * sizeof(s8), - GFP_KERNEL); - if (!queue_priority_map) - return -ENOMEM; - - for (i = 0; i < edma_cc->num_tc; i++) { - queue_priority_map[i][0] = i; - queue_priority_map[i][1] = i; - } - queue_priority_map[i][0] = -1; - queue_priority_map[i][1] = -1; - - pdata->queue_priority_mapping = queue_priority_map; - /* Default queue has the lowest priority */ - pdata->default_queue = i - 1; - - return 0; -} - -#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES) - -static int edma_xbar_event_map(struct device *dev, struct device_node *node, - struct edma_soc_info *pdata, size_t sz) -{ - const char pname[] = "ti,edma-xbar-event-map"; - struct resource res; - void __iomem *xbar; - s16 (*xbar_chans)[2]; - size_t nelm = sz / sizeof(s16); - u32 shift, offset, mux; - int ret, i; - - xbar_chans = devm_kzalloc(dev, (nelm + 2) * sizeof(s16), GFP_KERNEL); - if (!xbar_chans) - return -ENOMEM; - - ret = of_address_to_resource(node, 1, &res); - if (ret) - return -ENOMEM; - - xbar = devm_ioremap(dev, res.start, resource_size(&res)); - if (!xbar) - return -ENOMEM; - - ret = of_property_read_u16_array(node, pname, (u16 *)xbar_chans, nelm); - if (ret) - return -EIO; - - /* Invalidate last entry for the other user of this mess */ - nelm >>= 1; - xbar_chans[nelm][0] = xbar_chans[nelm][1] = -1; - - for (i = 0; i < nelm; i++) { - shift = (xbar_chans[i][1] & 0x03) << 3; - offset = xbar_chans[i][1] & 0xfffffffc; - mux = readl(xbar + offset); - mux &= ~(0xff << shift); - mux |= xbar_chans[i][0] << shift; - writel(mux, (xbar + offset)); - } - - pdata->xbar_chans = (const s16 (*)[2]) xbar_chans; - return 0; -} - -static int edma_of_parse_dt(struct device *dev, - struct device_node *node, - struct edma_soc_info *pdata) -{ - int ret = 0; - struct property *prop; - size_t sz; - struct edma_rsv_info *rsv_info; - - rsv_info = devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL); - if (!rsv_info) - return -ENOMEM; - pdata->rsv = rsv_info; - - prop = of_find_property(node, "ti,edma-xbar-event-map", &sz); - if (prop) - ret = edma_xbar_event_map(dev, node, pdata, sz); - - return ret; -} - -static struct of_dma_filter_info edma_filter_info = { - .filter_fn = edma_filter_fn, -}; - -static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev, - struct device_node *node) -{ - struct edma_soc_info *info; - int ret; - - info = devm_kzalloc(dev, sizeof(struct edma_soc_info), GFP_KERNEL); - if (!info) - return ERR_PTR(-ENOMEM); - - ret = edma_of_parse_dt(dev, node, info); - if (ret) - return ERR_PTR(ret); - - dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap); - dma_cap_set(DMA_CYCLIC, edma_filter_info.dma_cap); - of_dma_controller_register(dev->of_node, of_dma_simple_xlate, - &edma_filter_info); - - return info; -} -#else -static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev, - struct device_node *node) -{ - return ERR_PTR(-ENOSYS); -} -#endif - -static int edma_probe(struct platform_device *pdev) -{ - struct edma_soc_info **info = pdev->dev.platform_data; - struct edma_soc_info *ninfo[EDMA_MAX_CC] = {NULL}; - s8 (*queue_priority_mapping)[2]; - int i, j, off, ln, found = 0; - int status = -1; - const s16 (*rsv_chans)[2]; - const s16 (*rsv_slots)[2]; - const s16 (*xbar_chans)[2]; - int irq[EDMA_MAX_CC] = {0, 0}; - int err_irq[EDMA_MAX_CC] = {0, 0}; - struct resource *r[EDMA_MAX_CC] = {NULL}; - struct resource res[EDMA_MAX_CC]; - char res_name[10]; - struct device_node *node = pdev->dev.of_node; - struct device *dev = &pdev->dev; - int ret; - struct platform_device_info edma_dev_info = { - .name = "edma-dma-engine", - .dma_mask = DMA_BIT_MASK(32), - .parent = &pdev->dev, - }; - - if (node) { - /* Check if this is a second instance registered */ - if (arch_num_cc) { - dev_err(dev, "only one EDMA instance is supported via DT\n"); - return -ENODEV; - } - - ninfo[0] = edma_setup_info_from_dt(dev, node); - if (IS_ERR(ninfo[0])) { - dev_err(dev, "failed to get DT data\n"); - return PTR_ERR(ninfo[0]); - } - - info = ninfo; - } - - if (!info) - return -ENODEV; - - pm_runtime_enable(dev); - ret = pm_runtime_get_sync(dev); - if (ret < 0) { - dev_err(dev, "pm_runtime_get_sync() failed\n"); - return ret; - } - - for (j = 0; j < EDMA_MAX_CC; j++) { - if (!info[j]) { - if (!found) - return -ENODEV; - break; - } - if (node) { - ret = of_address_to_resource(node, j, &res[j]); - if (!ret) - r[j] = &res[j]; - } else { - sprintf(res_name, "edma_cc%d", j); - r[j] = platform_get_resource_byname(pdev, - IORESOURCE_MEM, - res_name); - } - if (!r[j]) { - if (found) - break; - else - return -ENODEV; - } else { - found = 1; - } - - edmacc_regs_base[j] = devm_ioremap_resource(&pdev->dev, r[j]); - if (IS_ERR(edmacc_regs_base[j])) - return PTR_ERR(edmacc_regs_base[j]); - - edma_cc[j] = devm_kzalloc(&pdev->dev, sizeof(struct edma), - GFP_KERNEL); - if (!edma_cc[j]) - return -ENOMEM; - - /* Get eDMA3 configuration from IP */ - ret = edma_setup_from_hw(dev, info[j], edma_cc[j], j); - if (ret) - return ret; - - edma_cc[j]->default_queue = info[j]->default_queue; - - dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", - edmacc_regs_base[j]); - - for (i = 0; i < edma_cc[j]->num_slots; i++) - memcpy_toio(edmacc_regs_base[j] + PARM_OFFSET(i), - &dummy_paramset, PARM_SIZE); - - /* Mark all channels as unused */ - memset(edma_cc[j]->edma_unused, 0xff, - sizeof(edma_cc[j]->edma_unused)); - - if (info[j]->rsv) { - - /* Clear the reserved channels in unused list */ - rsv_chans = info[j]->rsv->rsv_chans; - if (rsv_chans) { - for (i = 0; rsv_chans[i][0] != -1; i++) { - off = rsv_chans[i][0]; - ln = rsv_chans[i][1]; - clear_bits(off, ln, - edma_cc[j]->edma_unused); - } - } - - /* Set the reserved slots in inuse list */ - rsv_slots = info[j]->rsv->rsv_slots; - if (rsv_slots) { - for (i = 0; rsv_slots[i][0] != -1; i++) { - off = rsv_slots[i][0]; - ln = rsv_slots[i][1]; - set_bits(off, ln, - edma_cc[j]->edma_inuse); - } - } - } - - /* Clear the xbar mapped channels in unused list */ - xbar_chans = info[j]->xbar_chans; - if (xbar_chans) { - for (i = 0; xbar_chans[i][1] != -1; i++) { - off = xbar_chans[i][1]; - clear_bits(off, 1, - edma_cc[j]->edma_unused); - } - } - - if (node) { - irq[j] = irq_of_parse_and_map(node, 0); - err_irq[j] = irq_of_parse_and_map(node, 2); - } else { - char irq_name[10]; - - sprintf(irq_name, "edma%d", j); - irq[j] = platform_get_irq_byname(pdev, irq_name); - - sprintf(irq_name, "edma%d_err", j); - err_irq[j] = platform_get_irq_byname(pdev, irq_name); - } - edma_cc[j]->irq_res_start = irq[j]; - edma_cc[j]->irq_res_end = err_irq[j]; - - status = devm_request_irq(dev, irq[j], dma_irq_handler, 0, - "edma", dev); - if (status < 0) { - dev_dbg(&pdev->dev, - "devm_request_irq %d failed --> %d\n", - irq[j], status); - return status; - } - - status = devm_request_irq(dev, err_irq[j], dma_ccerr_handler, 0, - "edma_error", dev); - if (status < 0) { - dev_dbg(&pdev->dev, - "devm_request_irq %d failed --> %d\n", - err_irq[j], status); - return status; - } - - for (i = 0; i < edma_cc[j]->num_channels; i++) - map_dmach_queue(j, i, info[j]->default_queue); - - queue_priority_mapping = info[j]->queue_priority_mapping; - - /* Event queue priority mapping */ - for (i = 0; queue_priority_mapping[i][0] != -1; i++) - assign_priority_to_queue(j, - queue_priority_mapping[i][0], - queue_priority_mapping[i][1]); - - /* Map the channel to param entry if channel mapping logic - * exist - */ - if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST) - map_dmach_param(j); - - for (i = 0; i < edma_cc[j]->num_region; i++) { - edma_write_array2(j, EDMA_DRAE, i, 0, 0x0); - edma_write_array2(j, EDMA_DRAE, i, 1, 0x0); - edma_write_array(j, EDMA_QRAE, i, 0x0); - } - edma_cc[j]->info = info[j]; - arch_num_cc++; - - edma_dev_info.id = j; - platform_device_register_full(&edma_dev_info); - } - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int edma_pm_resume(struct device *dev) -{ - int i, j; - - for (j = 0; j < arch_num_cc; j++) { - struct edma *cc = edma_cc[j]; - - s8 (*queue_priority_mapping)[2]; - - queue_priority_mapping = cc->info->queue_priority_mapping; - - /* Event queue priority mapping */ - for (i = 0; queue_priority_mapping[i][0] != -1; i++) - assign_priority_to_queue(j, - queue_priority_mapping[i][0], - queue_priority_mapping[i][1]); - - /* - * Map the channel to param entry if channel mapping logic - * exist - */ - if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST) - map_dmach_param(j); - - for (i = 0; i < cc->num_channels; i++) { - if (test_bit(i, cc->edma_inuse)) { - /* ensure access through shadow region 0 */ - edma_or_array2(j, EDMA_DRAE, 0, i >> 5, - BIT(i & 0x1f)); - - setup_dma_interrupt(i, - cc->intr_data[i].callback, - cc->intr_data[i].data); - } - } - } - - return 0; -} -#endif - -static const struct dev_pm_ops edma_pm_ops = { - SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, edma_pm_resume) -}; - -static struct platform_driver edma_driver = { - .driver = { - .name = "edma", - .pm = &edma_pm_ops, - .of_match_table = edma_of_ids, - }, - .probe = edma_probe, -}; - -static int __init edma_init(void) -{ - return platform_driver_probe(&edma_driver, edma_probe); -} -arch_initcall(edma_init); - diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 090c5b25dbed..1b1e5acd76e2 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -17,7 +17,6 @@ CONFIG_ARCH_MULTI_V4T=y CONFIG_ARCH_MULTI_V5=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_AT91=y -CONFIG_SOC_SAM_V4_V5=y CONFIG_SOC_AT91RM9200=y CONFIG_SOC_AT91SAM9=y CONFIG_AEABI=y @@ -28,7 +27,6 @@ CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" CONFIG_KEXEC=y -CONFIG_AUTO_ZRELADDR=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_NET=y CONFIG_PACKET=y @@ -43,7 +41,6 @@ CONFIG_IP_PNP_RARP=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set -CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set @@ -119,7 +116,6 @@ CONFIG_LEGACY_PTY_COUNT=4 CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y -CONFIG_I2C=y CONFIG_I2C_AT91=y CONFIG_I2C_GPIO=y CONFIG_SPI=y @@ -142,16 +138,12 @@ CONFIG_SOC_CAMERA_OV2640=m CONFIG_DRM=y CONFIG_DRM_ATMEL_HLCDC=y CONFIG_DRM_PANEL_SIMPLE=y -CONFIG_FB=y CONFIG_FB_ATMEL=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_ATMEL_LCDC=y # CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y @@ -216,18 +208,11 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_CRYPTO=y CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_ARC4=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set CONFIG_CRC_CCITT=y -CONFIG_CRC_ITU_T=y -CONFIG_CRC7=m -CONFIG_AVERAGE=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_ACORN_8x8=y diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig deleted file mode 100644 index 3125e00f05ab..000000000000 --- a/arch/arm/configs/bockw_defconfig +++ /dev/null @@ -1,133 +0,0 @@ -# CONFIG_ARM_PATCH_PHYS_VIRT is not set -CONFIG_KERNEL_LZMA=y -CONFIG_NO_HZ=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_SYSCTL_SYSCALL=y -CONFIG_EMBEDDED=y -CONFIG_SLAB=y -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE_LEGACY=y -CONFIG_ARCH_R8A7778=y -CONFIG_MACH_BOCKW=y -CONFIG_MEMORY_START=0x60000000 -CONFIG_MEMORY_SIZE=0x10000000 -CONFIG_SHMOBILE_TIMER_HZ=1024 -# CONFIG_SH_TIMER_CMT is not set -# CONFIG_EM_TIMER_STI is not set -CONFIG_ARM_ERRATA_430973=y -CONFIG_ARM_ERRATA_458693=y -CONFIG_ARM_ERRATA_460075=y -CONFIG_ARM_ERRATA_743622=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_HIGHMEM=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_VFP=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_SPI_NOR=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -# CONFIG_NET_CADENCE is not set -# CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CIRRUS is not set -# CONFIG_NET_VENDOR_FARADAY is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_NET_VENDOR_MARVELL is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -# CONFIG_NET_VENDOR_SEEQ is not set -CONFIG_SMSC911X=y -# CONFIG_NET_VENDOR_STMICRO is not set -# CONFIG_NET_VENDOR_WIZNET is not set -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=6 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_I2C=y -CONFIG_I2C_RCAR=y -CONFIG_GPIO_RCAR=y -CONFIG_REGULATOR=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_SOC_CAMERA=y -CONFIG_VIDEO_RCAR_VIN=y -# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set -CONFIG_VIDEO_ML86V7667=y -CONFIG_SPI=y -CONFIG_SPI_SH_HSPI=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_SOC=y -CONFIG_SND_SOC_RCAR=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PLATFORM=y -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_STORAGE=y -CONFIG_USB_RCAR_PHY=y -CONFIG_MMC=y -CONFIG_MMC_SDHI=y -CONFIG_MMC_SH_MMCIF=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_RX8581=y -CONFIG_DMADEVICES=y -CONFIG_RCAR_HPB_DMAE=y -CONFIG_UIO=y -CONFIG_UIO_PDRV_GENIRQ=y -# CONFIG_IOMMU_SUPPORT is not set -# CONFIG_DNOTIFY is not set -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFS_SWAP=y -CONFIG_NFS_V4_1=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_FTRACE is not set -# CONFIG_ARM_UNWIND is not set -CONFIG_AVERAGE=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 13ba48c4b03b..e0841a58ff9d 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -61,11 +61,12 @@ CONFIG_BLK_DEV_DM=y CONFIG_DM_CRYPT=m CONFIG_NETDEVICES=y CONFIG_SMSC911X=y +CONFIG_USB_RTL8152=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y -CONFIG_MWIFIEX=y -CONFIG_MWIFIEX_SDIO=y +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_CROS_EC=y @@ -126,16 +127,20 @@ CONFIG_REGULATOR_S2MPA01=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS65090=y +CONFIG_MEDIA_SUPPORT=m +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_USB_VIDEO_CLASS=m CONFIG_DRM=y CONFIG_DRM_NXP_PTN3460=y CONFIG_DRM_PARADE_PS8622=y CONFIG_DRM_EXYNOS=y CONFIG_DRM_EXYNOS_FIMD=y CONFIG_DRM_EXYNOS_DSI=y +CONFIG_DRM_EXYNOS_MIXER=y CONFIG_DRM_EXYNOS_HDMI=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y -CONFIG_FB_SIMPLE=y CONFIG_EXYNOS_VIDEO=y CONFIG_EXYNOS_MIPI_DSI=y CONFIG_LCD_CLASS_DEVICE=y @@ -158,8 +163,10 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_EXYNOS=y CONFIG_USB_STORAGE=y CONFIG_USB_DWC3=y +CONFIG_USB_DWC2=y CONFIG_USB_HSIC_USB3503=y CONFIG_USB_GADGET=y +CONFIG_USB_ETH=y CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_SDHCI=y @@ -167,6 +174,12 @@ CONFIG_MMC_SDHCI_S3C=y CONFIG_MMC_SDHCI_S3C_DMA=y CONFIG_MMC_DW=y CONFIG_MMC_DW_EXYNOS=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PWM=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_MAX77802=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 79194c60c78c..4187f69f6630 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -47,7 +47,6 @@ CONFIG_SOC_VF610=y CONFIG_PCI=y CONFIG_PCI_IMX6=y CONFIG_SMP=y -CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y CONFIG_HIGHMEM=y @@ -159,6 +158,7 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_EGALAX=y +CONFIG_TOUCHSCREEN_IMX6UL_TSC=y CONFIG_TOUCHSCREEN_MC13783=y CONFIG_TOUCHSCREEN_TSC2007=y CONFIG_TOUCHSCREEN_STMPE=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index 95ce1284bd42..5bcc9cf9d8f1 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -4,6 +4,12 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_SCHED=y +CONFIG_BLK_CGROUP=y CONFIG_BLK_DEV_INITRD=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y @@ -27,6 +33,7 @@ CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_HIGHMEM=y +CONFIG_CMA=y CONFIG_VFP=y CONFIG_NEON=y # CONFIG_SUSPEND is not set @@ -57,7 +64,6 @@ CONFIG_IP_MROUTE_MULTIPLE_TABLES=y CONFIG_IP_PIMSM_V2=y CONFIG_INET_AH=y CONFIG_INET_IPCOMP=y -CONFIG_IPV6=y CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m @@ -93,7 +99,6 @@ CONFIG_IP_NF_MATCH_ECN=y CONFIG_IP_NF_MATCH_TTL=y CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y -CONFIG_IP_NF_TARGET_ULOG=y CONFIG_IP_NF_MANGLE=y CONFIG_IP_NF_TARGET_CLUSTERIP=y CONFIG_IP_NF_TARGET_ECN=y @@ -106,7 +111,8 @@ CONFIG_IP6_NF_IPTABLES=m CONFIG_IP_SCTP=y CONFIG_VLAN_8021Q=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_CMA=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y @@ -117,7 +123,6 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y -CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_EEPROM_AT24=y CONFIG_SCSI=y @@ -125,7 +130,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y CONFIG_TI_KEYSTONE_NETCP=y CONFIG_TI_KEYSTONE_NETCP_ETHSS=y -CONFIG_PHYLIB=y +CONFIG_MARVELL_PHY=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y @@ -137,12 +142,15 @@ CONFIG_I2C_DAVINCI=y CONFIG_SPI=y CONFIG_SPI_DAVINCI=y CONFIG_SPI_SPIDEV=y -# CONFIG_HWMON is not set +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_DAVINCI=y +CONFIG_GPIO_SYSCON=y CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_KEYSTONE=y +# CONFIG_HWMON is not set CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_CORE=y CONFIG_DAVINCI_WATCHDOG=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y @@ -150,9 +158,15 @@ CONFIG_USB_MON=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_DEBUG=y -CONFIG_USB_DWC3_VERBOSE=y CONFIG_KEYSTONE_USB_PHY=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y CONFIG_SOC_TI=y @@ -160,8 +174,11 @@ CONFIG_KEYSTONE_NAVIGATOR_QMSS=y CONFIG_KEYSTONE_NAVIGATOR_DMA=y CONFIG_MEMORY=y CONFIG_TI_AEMIF=y +CONFIG_KEYSTONE_IRQ=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_FANOTIFY=y +CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y @@ -179,11 +196,10 @@ CONFIG_NFSD_V3_ACL=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_SHIRQ=y CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_SHIRQ=y CONFIG_DEBUG_USER=y CONFIG_CRYPTO_USER=y -CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_AUTHENC=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=y @@ -192,19 +208,3 @@ CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_CRYPTO_USER_API_HASH=y CONFIG_CRYPTO_USER_API_SKCIPHER=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_DAVINCI=y -CONFIG_LEDS_CLASS=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_ONESHOT=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_BACKLIGHT=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_KEYSTONE_IRQ=y -CONFIG_GPIO_SYSCON=y -CONFIG_TI_DAVINCI_MDIO=y -CONFIG_MARVELL_PHY=y -CONFIG_DEVTMPFS=y diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig index b7e8cdab51f9..03c155f5b811 100644 --- a/arch/arm/configs/lpc18xx_defconfig +++ b/arch/arm/configs/lpc18xx_defconfig @@ -52,15 +52,22 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set CONFIG_MTD=y +CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_SPI_NOR=y +# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set +CONFIG_SPI_NXP_SPIFI=y CONFIG_BLK_DEV_RAM=y CONFIG_SRAM=y CONFIG_EEPROM_AT24=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +# CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_ARC is not set # CONFIG_NET_CADENCE is not set @@ -102,14 +109,17 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y +CONFIG_I2C_LPC2K=y CONFIG_SPI=y CONFIG_SPI_PL022=y +CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_74XX_MMIO=y +CONFIG_GPIO_PCF857X=y +CONFIG_SENSORS_JC42=y CONFIG_SENSORS_LM75=y CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_CORE=y -CONFIG_MFD_SYSCON=y +CONFIG_LPC18XX_WATCHDOG=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y @@ -117,6 +127,8 @@ CONFIG_FB_ARMCLCD=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_DW=y CONFIG_NEW_LEDS=y @@ -127,12 +139,20 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_LPC24XX=y CONFIG_DMADEVICES=y CONFIG_AMBA_PL08X=y +CONFIG_LPC18XX_DMAMUX=y +CONFIG_MEMORY=y +CONFIG_ARM_PL172_MPMC=y +CONFIG_PWM=y +CONFIG_PWM_LPC18XX_SCT=y +CONFIG_PHY_LPC18XX_USB_OTG=y CONFIG_EXT2_FS=y # CONFIG_FILE_LOCKING is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY_USER is not set +CONFIG_JFFS2_FS=y # CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y @@ -142,8 +162,6 @@ CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_RCU_CPU_STALL_INFO is not set -# CONFIG_FTRACE is not set CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y CONFIG_CRC_ITU_T=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 03deb7fb35e8..69a22fdb52a5 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -21,10 +21,12 @@ CONFIG_MACH_ARMADA_39X=y CONFIG_MACH_ARMADA_XP=y CONFIG_MACH_DOVE=y CONFIG_ARCH_AT91=y +CONFIG_SOC_SAMA5D2=y CONFIG_SOC_SAMA5D3=y CONFIG_SOC_SAMA5D4=y CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM_CYGNUS=y +CONFIG_ARCH_BCM_NSP=y CONFIG_ARCH_BCM_21664=y CONFIG_ARCH_BCM_281XX=y CONFIG_ARCH_BCM_5301X=y @@ -85,7 +87,6 @@ CONFIG_ARCH_R8A7791=y CONFIG_ARCH_R8A7793=y CONFIG_ARCH_R8A7794=y CONFIG_ARCH_SH73A0=y -CONFIG_MACH_MARZEN=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_SIRF=y CONFIG_ARCH_TEGRA=y @@ -153,6 +154,7 @@ CONFIG_CAN_DEV=y CONFIG_CAN_AT91=m CONFIG_CAN_XILINXCAN=y CONFIG_CAN_MCP251X=y +CONFIG_CAN_SUN4I=y CONFIG_BT=m CONFIG_BT_MRVL=m CONFIG_BT_MRVL_SDIO=m @@ -207,6 +209,7 @@ CONFIG_NET_CALXEDA_XGMAC=y CONFIG_IGB=y CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y +CONFIG_PXA168_ETH=m CONFIG_KS8851=y CONFIG_R8169=y CONFIG_SH_ETH=y @@ -220,7 +223,9 @@ CONFIG_SMSC_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_MICREL_PHY=y +CONFIG_FIXED_PHY=y CONFIG_USB_PEGASUS=y +CONFIG_USB_RTL8152=m CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y @@ -245,6 +250,7 @@ CONFIG_TOUCHSCREEN_ATMEL_MXT=y CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_STMPE=y CONFIG_TOUCHSCREEN_SUN4I=y +CONFIG_TOUCHSCREEN_WM97XX=m CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y CONFIG_INPUT_AXP20X_PEK=y @@ -302,12 +308,15 @@ CONFIG_I2C_GPIO=m CONFIG_I2C_EXYNOS5=y CONFIG_I2C_MV64XXX=y CONFIG_I2C_RIIC=y +CONFIG_I2C_RK3X=y CONFIG_I2C_S3C2410=y CONFIG_I2C_SH_MOBILE=y CONFIG_I2C_SIRF=y CONFIG_I2C_ST=y CONFIG_I2C_SUN6I_P2WI=y CONFIG_I2C_TEGRA=y +CONFIG_I2C_UNIPHIER=y +CONFIG_I2C_UNIPHIER_F=y CONFIG_I2C_XILINX=y CONFIG_I2C_RCAR=y CONFIG_I2C_CROS_EC_TUNNEL=m @@ -318,6 +327,7 @@ CONFIG_SPI_DAVINCI=y CONFIG_SPI_OMAP24XX=y CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y +CONFIG_SPI_ROCKCHIP=m CONFIG_SPI_RSPI=y CONFIG_SPI_S3C64XX=m CONFIG_SPI_SH_MSIOF=m @@ -332,6 +342,7 @@ CONFIG_SPI_XILINX=y CONFIG_SPI_SPIDEV=y CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_PALMAS=y +CONFIG_PINCTRL_APQ8064=y CONFIG_PINCTRL_APQ8084=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC_PLATFORM=y @@ -365,6 +376,7 @@ CONFIG_SENSORS_LM95245=y CONFIG_SENSORS_NTC_THERMISTOR=m CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y +CONFIG_ROCKCHIP_THERMAL=y CONFIG_RCAR_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_DAVINCI_WATCHDOG=m @@ -382,6 +394,7 @@ CONFIG_MESON_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y CONFIG_MFD_AS3711=y CONFIG_MFD_AS3722=y +CONFIG_MFD_ATMEL_FLEXCOM=y CONFIG_MFD_BCM590XX=y CONFIG_MFD_AXP20X=y CONFIG_MFD_CROS_EC=y @@ -391,6 +404,9 @@ CONFIG_MFD_MAX14577=y CONFIG_MFD_MAX77686=y CONFIG_MFD_MAX77693=y CONFIG_MFD_MAX8907=y +CONFIG_MFD_RK808=y +CONFIG_MFD_PM8921_CORE=y +CONFIG_MFD_QCOM_RPM=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_STMPE=y CONFIG_MFD_PALMAS=y @@ -398,11 +414,14 @@ CONFIG_MFD_TPS65090=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y CONFIG_REGULATOR_AB8500=y +CONFIG_REGULATOR_ACT8865=y CONFIG_REGULATOR_AS3711=y CONFIG_REGULATOR_AS3722=y CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_BCM590XX=y CONFIG_REGULATOR_DA9210=y +CONFIG_REGULATOR_FAN53555=y +CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_GPIO=y CONFIG_MFD_SYSCON=y CONFIG_POWER_RESET_SYSCON=y @@ -415,6 +434,8 @@ CONFIG_REGULATOR_MAX77802=m CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_PBIAS=y CONFIG_REGULATOR_PWM=m +CONFIG_REGULATOR_QCOM_RPM=y +CONFIG_REGULATOR_QCOM_SMD_RPM=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS51632=y @@ -441,6 +462,7 @@ CONFIG_VIDEO_RENESAS_VSP1=m CONFIG_VIDEO_ADV7180=m CONFIG_VIDEO_ML86V7667=m CONFIG_DRM=y +CONFIG_DRM_I2C_ADV7511=m # CONFIG_DRM_I2C_CH7006 is not set # CONFIG_DRM_I2C_SIL164 is not set CONFIG_DRM_NXP_PTN3460=m @@ -450,7 +472,11 @@ CONFIG_DRM_EXYNOS=m CONFIG_DRM_EXYNOS_DSI=y CONFIG_DRM_EXYNOS_FIMD=y CONFIG_DRM_EXYNOS_HDMI=y +CONFIG_DRM_ROCKCHIP=m +CONFIG_ROCKCHIP_DW_HDMI=m CONFIG_DRM_RCAR_DU=m +CONFIG_DRM_RCAR_HDMI=y +CONFIG_DRM_RCAR_LVDS=y CONFIG_DRM_TEGRA=y CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m CONFIG_DRM_PANEL_SIMPLE=y @@ -485,6 +511,7 @@ CONFIG_SND_SOC_TEGRA=m CONFIG_SND_SOC_TEGRA_RT5640=m CONFIG_SND_SOC_TEGRA_WM8753=m CONFIG_SND_SOC_TEGRA_WM8903=m +CONFIG_SND_SOC_TEGRA_WM9712=m CONFIG_SND_SOC_TEGRA_TRIMSLICE=m CONFIG_SND_SOC_TEGRA_ALC5632=m CONFIG_SND_SOC_TEGRA_MAX98090=m @@ -494,6 +521,7 @@ CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_MVEBU=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MSM=m CONFIG_USB_EHCI_EXYNOS=y CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_EHCI_HCD_STI=y @@ -507,6 +535,7 @@ CONFIG_USB_R8A66597_HCD=m CONFIG_USB_RENESAS_USBHS=m CONFIG_USB_STORAGE=y CONFIG_USB_DWC3=y +CONFIG_USB_DWC2=m CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_AB8500_USB=y @@ -514,16 +543,19 @@ CONFIG_KEYSTONE_USB_PHY=y CONFIG_OMAP_USB3=y CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y +CONFIG_USB_MSM_OTG=m CONFIG_USB_MXS_PHY=y CONFIG_USB_RCAR_PHY=m CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=m +CONFIG_USB_ETH=m CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_OF_ARASAN=y +CONFIG_MMC_SDHCI_OF_AT91=y CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_DOVE=y CONFIG_MMC_SDHCI_TEGRA=y @@ -566,8 +598,10 @@ CONFIG_EDAC_HIGHBANK_L2=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AS3722=y CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_HYM8563=m CONFIG_RTC_DRV_MAX8907=y CONFIG_RTC_DRV_MAX77686=y +CONFIG_RTC_DRV_RK808=m CONFIG_RTC_DRV_MAX77802=m CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_PALMAS=y @@ -605,6 +639,7 @@ CONFIG_IMX_SDMA=y CONFIG_IMX_DMA=y CONFIG_MXS_DMA=y CONFIG_DMA_OMAP=y +CONFIG_QCOM_BAM_DMA=y CONFIG_XILINX_VDMA=y CONFIG_DMA_SUN6I=y CONFIG_STAGING=y @@ -617,6 +652,9 @@ CONFIG_NVEC_POWER=y CONFIG_NVEC_PAZ00=y CONFIG_QCOM_GSBI=y CONFIG_QCOM_PM=y +CONFIG_QCOM_SMD=y +CONFIG_QCOM_SMD_RPM=y +CONFIG_QCOM_SMEM=y CONFIG_COMMON_CLK_QCOM=y CONFIG_CHROME_PLATFORMS=y CONFIG_CROS_EC_CHARDEV=m @@ -627,6 +665,8 @@ CONFIG_APQ_MMCC_8084=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y +CONFIG_HWSPINLOCK_QCOM=y +CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_PM_DEVFREQ=y @@ -636,6 +676,7 @@ CONFIG_EXTCON=y CONFIG_TI_AEMIF=y CONFIG_IIO=y CONFIG_AT91_ADC=m +CONFIG_BERLIN2_ADC=m CONFIG_EXYNOS_ADC=m CONFIG_XILINX_XADC=y CONFIG_AK8975=y @@ -643,6 +684,7 @@ CONFIG_PWM=y CONFIG_PWM_ATMEL=m CONFIG_PWM_ATMEL_TCB=m CONFIG_PWM_RENESAS_TPU=y +CONFIG_PWM_ROCKCHIP=m CONFIG_PWM_SAMSUNG=m CONFIG_PWM_SUN4I=y CONFIG_PWM_TEGRA=y @@ -651,6 +693,10 @@ CONFIG_PHY_HIX5HD2_SATA=y CONFIG_PWM_STI=m CONFIG_OMAP_USB2=y CONFIG_TI_PIPE3=y +CONFIG_PHY_BERLIN_USB=y +CONFIG_PHY_BERLIN_SATA=y +CONFIG_PHY_ROCKCHIP_USB=m +CONFIG_PHY_QCOM_APQ8064_SATA=m CONFIG_PHY_MIPHY28LP=y CONFIG_PHY_MIPHY365X=y CONFIG_PHY_RCAR_GEN2=m diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index 13fcd020e375..c6729bf0a8dd 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -61,6 +61,7 @@ CONFIG_MTD_SPI_NOR=y CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y CONFIG_ATA=y +CONFIG_SATA_AHCI=y CONFIG_AHCI_MVEBU=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y @@ -85,6 +86,9 @@ CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PCA953X=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_GPIO=y CONFIG_SENSORS_GPIO_FAN=y CONFIG_THERMAL=y CONFIG_ARMADA_THERMAL=y @@ -111,12 +115,15 @@ CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_DOVE=y CONFIG_MMC_SDHCI_PXAV3=y CONFIG_MMC_MVSDIO=y -CONFIG_LEDS_GPIO=y +CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_S35390A=y CONFIG_RTC_DRV_MV=y CONFIG_RTC_DRV_ARMADA38X=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index ff7985ba226e..ee54a706e8a3 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -109,6 +109,7 @@ CONFIG_MFD_QCOM_RPM=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_QCOM_RPM=y +CONFIG_REGULATOR_QCOM_SMD_RPM=y CONFIG_MEDIA_SUPPORT=y CONFIG_FB=y CONFIG_SOUND=y @@ -145,16 +146,17 @@ CONFIG_MSM_GCC_8660=y CONFIG_MSM_LCC_8960=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y -CONFIG_MSM_IOMMU=y +CONFIG_HWSPINLOCK_QCOM=y CONFIG_QCOM_GSBI=y CONFIG_QCOM_PM=y +CONFIG_QCOM_SMD=y +CONFIG_QCOM_SMD_RPM=y +CONFIG_QCOM_SMEM=y CONFIG_PHY_QCOM_APQ8064_SATA=y CONFIG_PHY_QCOM_IPQ806X_SATA=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_EXT4_FS=y CONFIG_FUSE_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 31eb951880ae..a0c57ac88b27 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -10,12 +10,11 @@ CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_AT91=y -CONFIG_SOC_SAM_V7=y +CONFIG_SOC_SAMA5D2=y CONFIG_SOC_SAMA5D3=y CONFIG_SOC_SAMA5D4=y CONFIG_AEABI=y @@ -25,12 +24,10 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" CONFIG_KEXEC=y -CONFIG_AUTO_ZRELADDR=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_KERNEL_MODE_NEON=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_PM=y CONFIG_PM_DEBUG=y CONFIG_PM_ADVANCED_DEBUG=y CONFIG_NET=y @@ -47,7 +44,6 @@ CONFIG_IP_PNP_RARP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set @@ -123,7 +119,6 @@ CONFIG_LEGACY_PTY_COUNT=4 CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y -CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_AT91=y CONFIG_I2C_GPIO=y @@ -135,6 +130,7 @@ CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y # CONFIG_HWMON is not set CONFIG_SSB=m +CONFIG_MFD_ATMEL_FLEXCOM=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_ACT8865=y @@ -142,8 +138,8 @@ CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SOC_CAMERA=y -CONFIG_SOC_CAMERA_OV2640=y CONFIG_VIDEO_ATMEL_ISI=y +CONFIG_SOC_CAMERA_OV2640=y CONFIG_FB=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set @@ -171,6 +167,9 @@ CONFIG_USB_ATMEL_USBA=y CONFIG_USB_G_SERIAL=y CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_AT91=y CONFIG_MMC_ATMELMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -207,11 +206,8 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_SCHED_DEBUG is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m CONFIG_CRYPTO_DEV_ATMEL_AES=y CONFIG_CRYPTO_DEV_ATMEL_TDES=y CONFIG_CRYPTO_DEV_ATMEL_SHA=y -CONFIG_CRC_CCITT=m -CONFIG_CRC_ITU_T=m diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 89bf31ccfbfa..3aef019c0de7 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -21,7 +21,6 @@ CONFIG_ARCH_R8A7791=y CONFIG_ARCH_R8A7793=y CONFIG_ARCH_R8A7794=y CONFIG_ARCH_SH73A0=y -CONFIG_MACH_MARZEN=y CONFIG_CPU_BPREDICT_DISABLE=y CONFIG_PL310_ERRATA_588369=y CONFIG_ARM_ERRATA_754322=y @@ -141,7 +140,10 @@ CONFIG_VIDEO_RENESAS_VSP1=y CONFIG_VIDEO_ADV7180=y CONFIG_VIDEO_ML86V7667=y CONFIG_DRM=y +CONFIG_DRM_I2C_ADV7511=y CONFIG_DRM_RCAR_DU=y +CONFIG_DRM_RCAR_HDMI=y +CONFIG_DRM_RCAR_LVDS=y CONFIG_FB_SH_MOBILE_LCDC=y CONFIG_FB_SH_MOBILE_MERAM=y # CONFIG_LCD_CLASS_DEVICE is not set diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index a2956c3112f1..8128b93ed72c 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/socfpga_defconfig @@ -86,6 +86,8 @@ CONFIG_USB_DWC2=y CONFIG_USB_DWC2_HOST=y CONFIG_MMC=y CONFIG_MMC_DW=y +CONFIG_FPGA=y +CONFIG_FPGA_MGR_SOCFPGA=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 51eea220baae..3c36e16fcacf 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -5,6 +5,7 @@ CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_PERF_EVENTS=y CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_SUNXI=y CONFIG_SMP=y CONFIG_NR_CPUS=8 @@ -31,6 +32,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set +CONFIG_CAN=y +CONFIG_CAN_SUN4I=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -63,6 +66,7 @@ CONFIG_STMMAC_ETH=y CONFIG_INPUT_MISC=y CONFIG_INPUT_AXP20X_PEK=y CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_KEYBOARD_SUN4I_LRADC=y CONFIG_TOUCHSCREEN_SUN4I=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 9808581176cc..3a36244e3cf6 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -1,5 +1,6 @@ CONFIG_SYSVIPC=y CONFIG_FHANDLE=y +CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y @@ -60,7 +61,6 @@ CONFIG_INET_ESP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -CONFIG_IPV6=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_OPTIMISTIC_DAD=y CONFIG_INET6_AH=y @@ -121,6 +121,9 @@ CONFIG_KEYBOARD_CROS_EC=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y +CONFIG_TOUCHSCREEN_WM97XX=y +# CONFIG_TOUCHSCREEN_WM9705 is not set +# CONFIG_TOUCHSCREEN_WM9713 is not set CONFIG_TOUCHSCREEN_STMPE=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y @@ -142,6 +145,7 @@ CONFIG_SPI_TEGRA20_SFLASH=y CONFIG_SPI_TEGRA20_SLINK=y CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_PALMAS=y +CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_PALMAS=y @@ -208,6 +212,7 @@ CONFIG_SND_SOC_TEGRA=y CONFIG_SND_SOC_TEGRA_RT5640=y CONFIG_SND_SOC_TEGRA_WM8753=y CONFIG_SND_SOC_TEGRA_WM8903=y +CONFIG_SND_SOC_TEGRA_WM9712=y CONFIG_SND_SOC_TEGRA_TRIMSLICE=y CONFIG_SND_SOC_TEGRA_ALC5632=y CONFIG_SND_SOC_TEGRA_MAX98090=y @@ -266,10 +271,8 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set CONFIG_VFAT_FS=y CONFIG_TMPFS=y @@ -278,6 +281,7 @@ CONFIG_SQUASHFS=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y CONFIG_NFS_FS=y +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y diff --git a/arch/arm/include/asm/hardware/cache-uniphier.h b/arch/arm/include/asm/hardware/cache-uniphier.h new file mode 100644 index 000000000000..102e3fbe1e10 --- /dev/null +++ b/arch/arm/include/asm/hardware/cache-uniphier.h @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __CACHE_UNIPHIER_H +#define __CACHE_UNIPHIER_H + +#include <linux/types.h> + +#ifdef CONFIG_CACHE_UNIPHIER +int uniphier_cache_init(void); +int uniphier_cache_l2_is_enabled(void); +void uniphier_cache_l2_touch_range(unsigned long start, unsigned long end); +void uniphier_cache_l2_set_locked_ways(u32 way_mask); +#else +static inline int uniphier_cache_init(void) +{ + return -ENODEV; +} + +static inline int uniphier_cache_l2_is_enabled(void) +{ + return 0; +} + +static inline void uniphier_cache_l2_touch_range(unsigned long start, + unsigned long end) +{ +} + +static inline void uniphier_cache_l2_set_locked_ways(u32 way_mask) +{ +} +#endif + +#endif /* __CACHE_UNIPHIER_H */ diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h index 535579511ed0..0a0e2d1784c0 100644 --- a/arch/arm/include/asm/highmem.h +++ b/arch/arm/include/asm/highmem.h @@ -68,7 +68,6 @@ extern void kunmap(struct page *page); extern void *kmap_atomic(struct page *page); extern void __kunmap_atomic(void *kvaddr); extern void *kmap_atomic_pfn(unsigned long pfn); -extern struct page *kmap_atomic_to_page(const void *ptr); #endif #endif diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S index 2556a8801c8c..43243be94cfc 100644 --- a/arch/arm/include/debug/at91.S +++ b/arch/arm/include/debug/at91.S @@ -9,32 +9,22 @@ * */ -#if defined(CONFIG_AT91_DEBUG_LL_DBGU0) -#define AT91_DBGU 0xfffff200 /* AT91_BASE_DBGU0 */ -#elif defined(CONFIG_AT91_DEBUG_LL_DBGU1) -#define AT91_DBGU 0xffffee00 /* AT91_BASE_DBGU1 */ -#elif defined(CONFIG_AT91_DEBUG_LL_DBGU2) -/* On sama5d4, use USART3 as low level serial console */ -#define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */ -#else -/* On sama5d2, use UART1 as low level serial console */ -#define AT91_DBGU 0xf8020000 -#endif - #ifdef CONFIG_MMU #define AT91_IO_P2V(x) ((x) - 0x01000000) #else #define AT91_IO_P2V(x) (x) #endif +#define CONFIG_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS) + #define AT91_DBGU_SR (0x14) /* Status Register */ #define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */ #define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */ #define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */ .macro addruart, rp, rv, tmp - ldr \rp, =AT91_DBGU @ System peripherals (phys address) - ldr \rv, =AT91_IO_P2V(AT91_DBGU) @ System peripherals (virt address) + ldr \rp, =CONFIG_DEBUG_UART_PHYS @ System peripherals (phys address) + ldr \rv, =CONFIG_DEBUG_UART_VIRT @ System peripherals (virt address) .endm .macro senduart,rd,rx diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 2766183e69df..1d45320ee125 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -39,6 +39,7 @@ #include <linux/export.h> #include <asm/hardware/cache-l2x0.h> +#include <asm/hardware/cache-uniphier.h> #include <asm/outercache.h> #include <asm/exception.h> #include <asm/mach/arch.h> @@ -97,6 +98,8 @@ void __init init_IRQ(void) if (ret) pr_err("L2C: failed to init: %d\n", ret); } + + uniphier_cache_init(); } #ifdef CONFIG_MULTI_IRQ_HANDLER diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c index 61c04b02faeb..9d479b2ea40d 100644 --- a/arch/arm/kernel/psci_smp.c +++ b/arch/arm/kernel/psci_smp.c @@ -71,7 +71,7 @@ int psci_cpu_disable(unsigned int cpu) return 0; } -void __ref psci_cpu_die(unsigned int cpu) +void psci_cpu_die(unsigned int cpu) { u32 state = PSCI_POWER_STATE_TYPE_POWER_DOWN << PSCI_0_2_POWER_STATE_TYPE_SHIFT; @@ -83,7 +83,7 @@ void __ref psci_cpu_die(unsigned int cpu) panic("psci: cpu %d failed to shutdown\n", cpu); } -int __ref psci_cpu_kill(unsigned int cpu) +int psci_cpu_kill(unsigned int cpu) { int err, i; diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index 0d95f488b47a..a25defda3d22 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -80,6 +80,8 @@ tmp2 .req r5 * @r2: base address of second SDRAM Controller or 0 if not present * @r3: pm information */ +/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */ + .align 3 ENTRY(at91_pm_suspend_in_sram) /* Save registers on stack */ stmfd sp!, {r4 - r12, lr} diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 84bd26535ae9..8c53c55be1fe 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -35,6 +35,20 @@ config ARCH_BCM_CYGNUS BCM11300, BCM11320, BCM11350, BCM11360, BCM58300, BCM58302, BCM58303, BCM58305. +config ARCH_BCM_NSP + bool "Broadcom Northstar Plus SoC Support" if ARCH_MULTI_V7 + select ARCH_BCM_IPROC + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 + help + Support for Broadcom Northstar Plus SoC. + Broadcom Northstar Plus family of SoCs are used for switching control + and management applications as well as residential router/gateway + applications. The SoC features dual core Cortex A9 ARM CPUs, + integrating several peripheral interfaces including multiple Gigabit + Ethernet PHYs, DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and + NAND flash, SATA and several other IO controllers. + config ARCH_BCM_5301X bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7 select ARCH_BCM_IPROC @@ -147,6 +161,7 @@ config ARCH_BRCMSTB select BCM7120_L2_IRQ select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select ARCH_WANT_OPTIONAL_GPIOLIB + select SOC_BRCMSTB help Say Y if you intend to run the kernel on a Broadcom ARM-based STB chipset. diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 1780a3ff42f9..892261fec0ae 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -1,5 +1,5 @@ # -# Copyright (C) 2012-2014 Broadcom Corporation +# Copyright (C) 2012-2015 Broadcom Corporation # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as @@ -13,6 +13,9 @@ # Cygnus obj-$(CONFIG_ARCH_BCM_CYGNUS) += bcm_cygnus.o +# Northstar Plus +obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o + # BCM281XX obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o diff --git a/arch/arm/mach-bcm/bcm_nsp.c b/arch/arm/mach-bcm/bcm_nsp.c new file mode 100644 index 000000000000..a1101a3d318e --- /dev/null +++ b/arch/arm/mach-bcm/bcm_nsp.c @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <asm/mach/arch.h> + +static const char *const bcm_nsp_dt_compat[] __initconst = { + "brcm,nsp", + NULL, +}; + +DT_MACHINE_START(NSP_DT, "Broadcom Northstar Plus SoC") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .dt_compat = bcm_nsp_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c index 3a60f7ee3f0c..99a67cfb7c0d 100644 --- a/arch/arm/mach-bcm/brcmstb.c +++ b/arch/arm/mach-bcm/brcmstb.c @@ -12,11 +12,19 @@ */ #include <linux/init.h> +#include <linux/irqchip.h> #include <linux/of_platform.h> +#include <linux/soc/brcmstb/brcmstb.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +static void __init brcmstb_init_irq(void) +{ + irqchip_init(); + brcmstb_biuctrl_init(); +} + static const char *const brcmstb_match[] __initconst = { "brcm,bcm7445", "brcm,brcmstb", @@ -25,4 +33,5 @@ static const char *const brcmstb_match[] __initconst = { DT_MACHINE_START(BRCMSTB, "Broadcom STB (Flattened Device Tree)") .dt_compat = brcmstb_match, + .init_irq = brcmstb_init_irq, MACHINE_END diff --git a/arch/arm/mach-berlin/berlin.c b/arch/arm/mach-berlin/berlin.c index ac181c6797ee..25d73870ccca 100644 --- a/arch/arm/mach-berlin/berlin.c +++ b/arch/arm/mach-berlin/berlin.c @@ -18,6 +18,11 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> +static void __init berlin_init_late(void) +{ + platform_device_register_simple("cpufreq-dt", -1, NULL, 0); +} + static const char * const berlin_dt_compat[] = { "marvell,berlin", NULL, @@ -25,6 +30,7 @@ static const char * const berlin_dt_compat[] = { DT_MACHINE_START(BERLIN_DT, "Marvell Berlin") .dt_compat = berlin_dt_compat, + .init_late = berlin_init_late, /* * with DT probing for L2CCs, berlin_init_machine can be removed. * Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc diff --git a/arch/arm/mach-berlin/platsmp.c b/arch/arm/mach-berlin/platsmp.c index 34a3753e7356..405cd37e4fba 100644 --- a/arch/arm/mach-berlin/platsmp.c +++ b/arch/arm/mach-berlin/platsmp.c @@ -14,10 +14,16 @@ #include <linux/of_address.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> -#define CPU_RESET 0x00 +/* + * There are two reset registers, one with self-clearing (SC) + * reset and one with non-self-clearing reset (NON_SC). + */ +#define CPU_RESET_SC 0x00 +#define CPU_RESET_NON_SC 0x20 #define RESET_VECT 0x00 #define SW_RESET_ADDR 0x94 @@ -30,9 +36,11 @@ static inline void berlin_perform_reset_cpu(unsigned int cpu) { u32 val; - val = readl(cpu_ctrl + CPU_RESET); + val = readl(cpu_ctrl + CPU_RESET_NON_SC); + val &= ~BIT(cpu_logical_map(cpu)); + writel(val, cpu_ctrl + CPU_RESET_NON_SC); val |= BIT(cpu_logical_map(cpu)); - writel(val, cpu_ctrl + CPU_RESET); + writel(val, cpu_ctrl + CPU_RESET_NON_SC); } static int berlin_boot_secondary(unsigned int cpu, struct task_struct *idle) @@ -91,8 +99,32 @@ unmap_scu: iounmap(scu_base); } +#ifdef CONFIG_HOTPLUG_CPU +static void berlin_cpu_die(unsigned int cpu) +{ + v7_exit_coherency_flush(louis); + while (1) + cpu_do_idle(); +} + +static int berlin_cpu_kill(unsigned int cpu) +{ + u32 val; + + val = readl(cpu_ctrl + CPU_RESET_NON_SC); + val &= ~BIT(cpu_logical_map(cpu)); + writel(val, cpu_ctrl + CPU_RESET_NON_SC); + + return 1; +} +#endif + static struct smp_operations berlin_smp_ops __initdata = { .smp_prepare_cpus = berlin_smp_prepare_cpus, .smp_boot_secondary = berlin_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = berlin_cpu_die, + .cpu_kill = berlin_cpu_kill, +#endif }; CPU_METHOD_OF_DECLARE(berlin_smp, "marvell,berlin-smp", &berlin_smp_ops); diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index c622c306c390..47905a50e075 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -65,8 +65,9 @@ static void __iomem *cns3xxx_pci_map_bus(struct pci_bus *bus, /* * The CNS PCI bridge doesn't fit into the PCI hierarchy, though - * we still want to access it. For this to work, we must place - * the first device on the same bus as the CNS PCI bridge. + * we still want to access it. + * We place the host bridge on bus 0, and the directly connected + * device on bus 1, slot 0. */ if (busno == 0) { /* internal PCIe bus, host bridge device */ if (devfn == 0) /* device# and function# are ignored by hw */ @@ -211,58 +212,46 @@ static void __init cns3xxx_pcie_check_link(struct cns3xxx_pcie *cnspci) } } +static void cns3xxx_write_config(struct cns3xxx_pcie *cnspci, + int where, int size, u32 val) +{ + void __iomem *base = cnspci->host_regs + (where & 0xffc); + u32 v; + u32 mask = (0x1ull << (size * 8)) - 1; + int shift = (where % 4) * 8; + + v = readl_relaxed(base + (where & 0xffc)); + + v &= ~(mask << shift); + v |= (val & mask) << shift; + + writel_relaxed(v, base + (where & 0xffc)); + readl_relaxed(base + (where & 0xffc)); +} + static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci) { - int port = cnspci->port; - struct pci_sys_data sd = { - .private_data = cnspci, - }; - struct pci_bus bus = { - .number = 0, - .ops = &cns3xxx_pcie_ops, - .sysdata = &sd, - }; u16 mem_base = cnspci->res_mem.start >> 16; u16 mem_limit = cnspci->res_mem.end >> 16; u16 io_base = cnspci->res_io.start >> 16; u16 io_limit = cnspci->res_io.end >> 16; - u32 devfn = 0; - u8 tmp8; - u16 pos; - u16 dc; - - pci_bus_write_config_byte(&bus, devfn, PCI_PRIMARY_BUS, 0); - pci_bus_write_config_byte(&bus, devfn, PCI_SECONDARY_BUS, 1); - pci_bus_write_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, 1); - pci_bus_read_config_byte(&bus, devfn, PCI_PRIMARY_BUS, &tmp8); - pci_bus_read_config_byte(&bus, devfn, PCI_SECONDARY_BUS, &tmp8); - pci_bus_read_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, &tmp8); - - pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_BASE, mem_base); - pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, mem_limit); - pci_bus_write_config_word(&bus, devfn, PCI_IO_BASE_UPPER16, io_base); - pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, io_limit); + cns3xxx_write_config(cnspci, PCI_PRIMARY_BUS, 1, 0); + cns3xxx_write_config(cnspci, PCI_SECONDARY_BUS, 1, 1); + cns3xxx_write_config(cnspci, PCI_SUBORDINATE_BUS, 1, 1); + cns3xxx_write_config(cnspci, PCI_MEMORY_BASE, 2, mem_base); + cns3xxx_write_config(cnspci, PCI_MEMORY_LIMIT, 2, mem_limit); + cns3xxx_write_config(cnspci, PCI_IO_BASE_UPPER16, 2, io_base); + cns3xxx_write_config(cnspci, PCI_IO_LIMIT_UPPER16, 2, io_limit); if (!cnspci->linked) return; /* Set Device Max_Read_Request_Size to 128 byte */ - bus.number = 1; /* directly connected PCIe device */ - devfn = PCI_DEVFN(0, 0); - pos = pci_bus_find_capability(&bus, devfn, PCI_CAP_ID_EXP); - pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc); - if (dc & PCI_EXP_DEVCTL_READRQ) { - dc &= ~PCI_EXP_DEVCTL_READRQ; - pci_bus_write_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, dc); - pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc); - if (dc & PCI_EXP_DEVCTL_READRQ) - pr_warn("PCIe: Unable to set device Max_Read_Request_Size\n"); - else - pr_info("PCIe: Max_Read_Request_Size set to 128 bytes\n"); - } + pcie_bus_config = PCIE_BUS_PEER2PEER; + /* Disable PCIe0 Interrupt Mask INTA to INTD */ - __raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(port)); + __raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(cnspci->port)); } static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr, diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 1a0898c1c17e..bbdd2d614b49 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -546,9 +546,7 @@ static int dm6444evm_msp430_get_pins(void) if (status < 0) return status; - dev_dbg(&dm6446evm_msp->dev, - "PINS: %02x %02x %02x %02x\n", - buf[0], buf[1], buf[2], buf[3]); + dev_dbg(&dm6446evm_msp->dev, "PINS: %4ph\n", buf); return (buf[3] << 8) | buf[2]; } diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index c70bb0a4dfb4..3caff9637a82 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -97,7 +97,9 @@ int clk_enable(struct clk *clk) { unsigned long flags; - if (clk == NULL || IS_ERR(clk)) + if (!clk) + return 0; + else if (IS_ERR(clk)) return -EINVAL; spin_lock_irqsave(&clockfw_lock, flags); @@ -124,7 +126,7 @@ EXPORT_SYMBOL(clk_disable); unsigned long clk_get_rate(struct clk *clk) { if (clk == NULL || IS_ERR(clk)) - return -EINVAL; + return 0; return clk->rate; } @@ -159,8 +161,10 @@ int clk_set_rate(struct clk *clk, unsigned long rate) unsigned long flags; int ret = -EINVAL; - if (clk == NULL || IS_ERR(clk)) - return ret; + if (!clk) + return 0; + else if (IS_ERR(clk)) + return -EINVAL; if (clk->set_rate) ret = clk->set_rate(clk, rate); @@ -181,7 +185,9 @@ int clk_set_parent(struct clk *clk, struct clk *parent) { unsigned long flags; - if (clk == NULL || IS_ERR(clk)) + if (!clk) + return 0; + else if (IS_ERR(clk)) return -EINVAL; /* Cannot change parent on enabled clock */ diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 29e08aac8294..28c90bc372bd 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -147,150 +147,118 @@ static s8 da850_queue_priority_mapping[][2] = { {-1, -1} }; -static struct edma_soc_info da830_edma_cc0_info = { +static struct edma_soc_info da8xx_edma0_pdata = { .queue_priority_mapping = da8xx_queue_priority_mapping, .default_queue = EVENTQ_1, }; -static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = { - &da830_edma_cc0_info, +static struct edma_soc_info da850_edma1_pdata = { + .queue_priority_mapping = da850_queue_priority_mapping, + .default_queue = EVENTQ_0, }; -static struct edma_soc_info da850_edma_cc_info[] = { +static struct resource da8xx_edma0_resources[] = { { - .queue_priority_mapping = da8xx_queue_priority_mapping, - .default_queue = EVENTQ_1, - }, - { - .queue_priority_mapping = da850_queue_priority_mapping, - .default_queue = EVENTQ_0, - }, -}; - -static struct edma_soc_info *da850_edma_info[EDMA_MAX_CC] = { - &da850_edma_cc_info[0], - &da850_edma_cc_info[1], -}; - -static struct resource da830_edma_resources[] = { - { - .name = "edma_cc0", + .name = "edma3_cc", .start = DA8XX_TPCC_BASE, .end = DA8XX_TPCC_BASE + SZ_32K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc0", + .name = "edma3_tc0", .start = DA8XX_TPTC0_BASE, .end = DA8XX_TPTC0_BASE + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc1", + .name = "edma3_tc1", .start = DA8XX_TPTC1_BASE, .end = DA8XX_TPTC1_BASE + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma0", + .name = "edma3_ccint", .start = IRQ_DA8XX_CCINT0, .flags = IORESOURCE_IRQ, }, { - .name = "edma0_err", + .name = "edma3_ccerrint", .start = IRQ_DA8XX_CCERRINT, .flags = IORESOURCE_IRQ, }, }; -static struct resource da850_edma_resources[] = { - { - .name = "edma_cc0", - .start = DA8XX_TPCC_BASE, - .end = DA8XX_TPCC_BASE + SZ_32K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma_tc0", - .start = DA8XX_TPTC0_BASE, - .end = DA8XX_TPTC0_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma_tc1", - .start = DA8XX_TPTC1_BASE, - .end = DA8XX_TPTC1_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, +static struct resource da850_edma1_resources[] = { { - .name = "edma_cc1", + .name = "edma3_cc", .start = DA850_TPCC1_BASE, .end = DA850_TPCC1_BASE + SZ_32K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc2", + .name = "edma3_tc0", .start = DA850_TPTC2_BASE, .end = DA850_TPTC2_BASE + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma0", - .start = IRQ_DA8XX_CCINT0, - .flags = IORESOURCE_IRQ, - }, - { - .name = "edma0_err", - .start = IRQ_DA8XX_CCERRINT, - .flags = IORESOURCE_IRQ, - }, - { - .name = "edma1", + .name = "edma3_ccint", .start = IRQ_DA850_CCINT1, .flags = IORESOURCE_IRQ, }, { - .name = "edma1_err", + .name = "edma3_ccerrint", .start = IRQ_DA850_CCERRINT1, .flags = IORESOURCE_IRQ, }, }; -static struct platform_device da830_edma_device = { +static const struct platform_device_info da8xx_edma0_device __initconst = { .name = "edma", - .id = -1, - .dev = { - .platform_data = da830_edma_info, - }, - .num_resources = ARRAY_SIZE(da830_edma_resources), - .resource = da830_edma_resources, + .id = 0, + .dma_mask = DMA_BIT_MASK(32), + .res = da8xx_edma0_resources, + .num_res = ARRAY_SIZE(da8xx_edma0_resources), + .data = &da8xx_edma0_pdata, + .size_data = sizeof(da8xx_edma0_pdata), }; -static struct platform_device da850_edma_device = { +static const struct platform_device_info da850_edma1_device __initconst = { .name = "edma", - .id = -1, - .dev = { - .platform_data = da850_edma_info, - }, - .num_resources = ARRAY_SIZE(da850_edma_resources), - .resource = da850_edma_resources, + .id = 1, + .dma_mask = DMA_BIT_MASK(32), + .res = da850_edma1_resources, + .num_res = ARRAY_SIZE(da850_edma1_resources), + .data = &da850_edma1_pdata, + .size_data = sizeof(da850_edma1_pdata), }; int __init da830_register_edma(struct edma_rsv_info *rsv) { - da830_edma_cc0_info.rsv = rsv; + struct platform_device *edma_pdev; + + da8xx_edma0_pdata.rsv = rsv; - return platform_device_register(&da830_edma_device); + edma_pdev = platform_device_register_full(&da8xx_edma0_device); + return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0; } int __init da850_register_edma(struct edma_rsv_info *rsv[2]) { + struct platform_device *edma_pdev; + if (rsv) { - da850_edma_cc_info[0].rsv = rsv[0]; - da850_edma_cc_info[1].rsv = rsv[1]; + da8xx_edma0_pdata.rsv = rsv[0]; + da850_edma1_pdata.rsv = rsv[1]; } - return platform_device_register(&da850_edma_device); + edma_pdev = platform_device_register_full(&da8xx_edma0_device); + if (IS_ERR(edma_pdev)) { + pr_warn("%s: Failed to register eDMA0\n", __func__); + return PTR_ERR(edma_pdev); + } + edma_pdev = platform_device_register_full(&da850_edma1_device); + return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0; } static struct resource da8xx_i2c_resources0[] = { diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 567dc56fe8cd..609950b8c191 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -569,61 +569,58 @@ static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ -static s8 -queue_priority_mapping[][2] = { +static s8 queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, {1, 7}, {-1, -1}, }; -static struct edma_soc_info edma_cc0_info = { +static struct edma_soc_info dm355_edma_pdata = { .queue_priority_mapping = queue_priority_mapping, .default_queue = EVENTQ_1, }; -static struct edma_soc_info *dm355_edma_info[EDMA_MAX_CC] = { - &edma_cc0_info, -}; - static struct resource edma_resources[] = { { - .name = "edma_cc0", + .name = "edma3_cc", .start = 0x01c00000, .end = 0x01c00000 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc0", + .name = "edma3_tc0", .start = 0x01c10000, .end = 0x01c10000 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc1", + .name = "edma3_tc1", .start = 0x01c10400, .end = 0x01c10400 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma0", + .name = "edma3_ccint", .start = IRQ_CCINT0, .flags = IORESOURCE_IRQ, }, { - .name = "edma0_err", + .name = "edma3_ccerrint", .start = IRQ_CCERRINT, .flags = IORESOURCE_IRQ, }, /* not using (or muxing) TC*_ERR */ }; -static struct platform_device dm355_edma_device = { - .name = "edma", - .id = 0, - .dev.platform_data = dm355_edma_info, - .num_resources = ARRAY_SIZE(edma_resources), - .resource = edma_resources, +static const struct platform_device_info dm355_edma_device __initconst = { + .name = "edma", + .id = 0, + .dma_mask = DMA_BIT_MASK(32), + .res = edma_resources, + .num_res = ARRAY_SIZE(edma_resources), + .data = &dm355_edma_pdata, + .size_data = sizeof(dm355_edma_pdata), }; static struct resource dm355_asp1_resources[] = { @@ -1062,13 +1059,18 @@ int __init dm355_init_video(struct vpfe_config *vpfe_cfg, static int __init dm355_init_devices(void) { + struct platform_device *edma_pdev; int ret = 0; if (!cpu_is_davinci_dm355()) return 0; davinci_cfg_reg(DM355_INT_EDMA_CC); - platform_device_register(&dm355_edma_device); + edma_pdev = platform_device_register_full(&dm355_edma_device); + if (IS_ERR(edma_pdev)) { + pr_warn("%s: Failed to register eDMA\n", __func__); + return PTR_ERR(edma_pdev); + } ret = davinci_init_wdt(); if (ret) diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 6a890a8486d0..2068cbeaeb03 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -853,8 +853,7 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { }; /* Four Transfer Controllers on DM365 */ -static s8 -dm365_queue_priority_mapping[][2] = { +static s8 dm365_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 7}, {1, 7}, @@ -863,53 +862,49 @@ dm365_queue_priority_mapping[][2] = { {-1, -1}, }; -static struct edma_soc_info edma_cc0_info = { +static struct edma_soc_info dm365_edma_pdata = { .queue_priority_mapping = dm365_queue_priority_mapping, .default_queue = EVENTQ_3, }; -static struct edma_soc_info *dm365_edma_info[EDMA_MAX_CC] = { - &edma_cc0_info, -}; - static struct resource edma_resources[] = { { - .name = "edma_cc0", + .name = "edma3_cc", .start = 0x01c00000, .end = 0x01c00000 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc0", + .name = "edma3_tc0", .start = 0x01c10000, .end = 0x01c10000 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc1", + .name = "edma3_tc1", .start = 0x01c10400, .end = 0x01c10400 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc2", + .name = "edma3_tc2", .start = 0x01c10800, .end = 0x01c10800 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc3", + .name = "edma3_tc3", .start = 0x01c10c00, .end = 0x01c10c00 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma0", + .name = "edma3_ccint", .start = IRQ_CCINT0, .flags = IORESOURCE_IRQ, }, { - .name = "edma0_err", + .name = "edma3_ccerrint", .start = IRQ_CCERRINT, .flags = IORESOURCE_IRQ, }, @@ -919,7 +914,7 @@ static struct resource edma_resources[] = { static struct platform_device dm365_edma_device = { .name = "edma", .id = 0, - .dev.platform_data = dm365_edma_info, + .dev.platform_data = &dm365_edma_pdata, .num_resources = ARRAY_SIZE(edma_resources), .resource = edma_resources, }; diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index dc52657909c4..d38f5049d56e 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -498,61 +498,58 @@ static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ -static s8 -queue_priority_mapping[][2] = { +static s8 queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, {1, 7}, {-1, -1}, }; -static struct edma_soc_info edma_cc0_info = { +static struct edma_soc_info dm644x_edma_pdata = { .queue_priority_mapping = queue_priority_mapping, .default_queue = EVENTQ_1, }; -static struct edma_soc_info *dm644x_edma_info[EDMA_MAX_CC] = { - &edma_cc0_info, -}; - static struct resource edma_resources[] = { { - .name = "edma_cc0", + .name = "edma3_cc", .start = 0x01c00000, .end = 0x01c00000 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc0", + .name = "edma3_tc0", .start = 0x01c10000, .end = 0x01c10000 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc1", + .name = "edma3_tc1", .start = 0x01c10400, .end = 0x01c10400 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma0", + .name = "edma3_ccint", .start = IRQ_CCINT0, .flags = IORESOURCE_IRQ, }, { - .name = "edma0_err", + .name = "edma3_ccerrint", .start = IRQ_CCERRINT, .flags = IORESOURCE_IRQ, }, /* not using TC*_ERR */ }; -static struct platform_device dm644x_edma_device = { - .name = "edma", - .id = 0, - .dev.platform_data = dm644x_edma_info, - .num_resources = ARRAY_SIZE(edma_resources), - .resource = edma_resources, +static const struct platform_device_info dm644x_edma_device __initconst = { + .name = "edma", + .id = 0, + .dma_mask = DMA_BIT_MASK(32), + .res = edma_resources, + .num_res = ARRAY_SIZE(edma_resources), + .data = &dm644x_edma_pdata, + .size_data = sizeof(dm644x_edma_pdata), }; /* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */ @@ -950,12 +947,17 @@ int __init dm644x_init_video(struct vpfe_config *vpfe_cfg, static int __init dm644x_init_devices(void) { + struct platform_device *edma_pdev; int ret = 0; if (!cpu_is_davinci_dm644x()) return 0; - platform_device_register(&dm644x_edma_device); + edma_pdev = platform_device_register_full(&dm644x_edma_device); + if (IS_ERR(edma_pdev)) { + pr_warn("%s: Failed to register eDMA\n", __func__); + return PTR_ERR(edma_pdev); + } platform_device_register(&dm644x_mdio_device); platform_device_register(&dm644x_emac_device); diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 3f842bb266d6..70eb42725eec 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -531,8 +531,7 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ /* Four Transfer Controllers on DM646x */ -static s8 -dm646x_queue_priority_mapping[][2] = { +static s8 dm646x_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 4}, {1, 0}, @@ -541,65 +540,63 @@ dm646x_queue_priority_mapping[][2] = { {-1, -1}, }; -static struct edma_soc_info edma_cc0_info = { +static struct edma_soc_info dm646x_edma_pdata = { .queue_priority_mapping = dm646x_queue_priority_mapping, .default_queue = EVENTQ_1, }; -static struct edma_soc_info *dm646x_edma_info[EDMA_MAX_CC] = { - &edma_cc0_info, -}; - static struct resource edma_resources[] = { { - .name = "edma_cc0", + .name = "edma3_cc", .start = 0x01c00000, .end = 0x01c00000 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc0", + .name = "edma3_tc0", .start = 0x01c10000, .end = 0x01c10000 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc1", + .name = "edma3_tc1", .start = 0x01c10400, .end = 0x01c10400 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc2", + .name = "edma3_tc2", .start = 0x01c10800, .end = 0x01c10800 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma_tc3", + .name = "edma3_tc3", .start = 0x01c10c00, .end = 0x01c10c00 + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { - .name = "edma0", + .name = "edma3_ccint", .start = IRQ_CCINT0, .flags = IORESOURCE_IRQ, }, { - .name = "edma0_err", + .name = "edma3_ccerrint", .start = IRQ_CCERRINT, .flags = IORESOURCE_IRQ, }, /* not using TC*_ERR */ }; -static struct platform_device dm646x_edma_device = { - .name = "edma", - .id = 0, - .dev.platform_data = dm646x_edma_info, - .num_resources = ARRAY_SIZE(edma_resources), - .resource = edma_resources, +static const struct platform_device_info dm646x_edma_device __initconst = { + .name = "edma", + .id = 0, + .dma_mask = DMA_BIT_MASK(32), + .res = edma_resources, + .num_res = ARRAY_SIZE(edma_resources), + .data = &dm646x_edma_pdata, + .size_data = sizeof(dm646x_edma_pdata), }; static struct resource dm646x_mcasp0_resources[] = { @@ -936,9 +933,12 @@ void dm646x_setup_vpif(struct vpif_display_config *display_config, int __init dm646x_init_edma(struct edma_rsv_info *rsv) { - edma_cc0_info.rsv = rsv; + struct platform_device *edma_pdev; + + dm646x_edma_pdata.rsv = rsv; - return platform_device_register(&dm646x_edma_device); + edma_pdev = platform_device_register_full(&dm646x_edma_device); + return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0; } void __init dm646x_init(void) diff --git a/arch/arm/mach-digicolor/Kconfig b/arch/arm/mach-digicolor/Kconfig index 4f36d8d2bc57..fc65b0f1db48 100644 --- a/arch/arm/mach-digicolor/Kconfig +++ b/arch/arm/mach-digicolor/Kconfig @@ -1,7 +1,10 @@ config ARCH_DIGICOLOR bool "Conexant Digicolor SoC Support" depends on ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select DIGICOLOR_TIMER select GENERIC_IRQ_CHIP select MFD_SYSCON + select PINCTRL + select PINCTRL_DIGICOLOR diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index 5a7e47ceec91..c169cc3049aa 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -19,6 +19,7 @@ #include <linux/cpu_pm.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/irqdomain.h> #include <linux/of_address.h> #include <linux/err.h> @@ -265,7 +266,7 @@ static int __init exynos_pmu_irq_init(struct device_node *node, return 0; } -#define EXYNOS_PMU_IRQ(symbol, name) OF_DECLARE_2(irqchip, symbol, name, exynos_pmu_irq_init) +#define EXYNOS_PMU_IRQ(symbol, name) IRQCHIP_DECLARE(symbol, name, exynos_pmu_irq_init) EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu"); EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu"); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 21e4e8697a58..e2d53839fceb 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -131,6 +131,7 @@ void imx6q_pm_init(void); void imx6dl_pm_init(void); void imx6sl_pm_init(void); void imx6sx_pm_init(void); +void imx6ul_pm_init(void); #ifdef CONFIG_PM void imx51_pm_init(void); diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 10bf7159b27d..8e7976a4c3e7 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -14,6 +14,7 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> @@ -271,12 +272,7 @@ static int __init imx_gpc_init(struct device_node *node, return 0; } - -/* - * We cannot use the IRQCHIP_DECLARE macro that lives in - * drivers/irqchip, so we're forced to roll our own. Not very nice. - */ -OF_DECLARE_2(irqchip, imx_gpc, "fsl,imx6q-gpc", imx_gpc_init); +IRQCHIP_DECLARE(imx_gpc, "fsl,imx6q-gpc", imx_gpc_init); void __init imx_gpc_check_dt(void) { diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c index 1b97fe133cef..acaf7056efa5 100644 --- a/arch/arm/mach-imx/mach-imx6ul.c +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -67,6 +67,7 @@ static void __init imx6ul_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); imx6ul_enet_init(); imx_anatop_init(); + imx6ul_pm_init(); } static void __init imx6ul_init_irq(void) @@ -74,6 +75,13 @@ static void __init imx6ul_init_irq(void) imx_init_revision_from_anatop(); imx_src_init(); irqchip_init(); + imx6_pm_ccm_init("fsl,imx6ul-ccm"); +} + +static void __init imx6ul_init_late(void) +{ + if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) + platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); } static const char *imx6ul_dt_compat[] __initconst = { @@ -84,5 +92,6 @@ static const char *imx6ul_dt_compat[] __initconst = { DT_MACHINE_START(IMX6UL, "Freescale i.MX6 Ultralite (Device Tree)") .init_irq = imx6ul_init_irq, .init_machine = imx6ul_init_machine, + .init_late = imx6ul_init_late, .dt_compat = imx6ul_dt_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c index 62f3437257f1..b450f525a670 100644 --- a/arch/arm/mach-imx/mach-imx7d.c +++ b/arch/arm/mach-imx/mach-imx7d.c @@ -6,12 +6,85 @@ * published by the Free Software Foundation. */ #include <linux/irqchip.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx7-iomuxc-gpr.h> #include <linux/of_platform.h> +#include <linux/phy.h> +#include <linux/regmap.h> + #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "common.h" +static int ar8031_phy_fixup(struct phy_device *dev) +{ + u16 val; + + /* Set RGMII IO voltage to 1.8V */ + phy_write(dev, 0x1d, 0x1f); + phy_write(dev, 0x1e, 0x8); + + /* disable phy AR8031 SmartEEE function. */ + phy_write(dev, 0xd, 0x3); + phy_write(dev, 0xe, 0x805d); + phy_write(dev, 0xd, 0x4003); + val = phy_read(dev, 0xe); + val &= ~(0x1 << 8); + phy_write(dev, 0xe, val); + + /* introduce tx clock delay */ + phy_write(dev, 0x1d, 0x5); + val = phy_read(dev, 0x1e); + val |= 0x0100; + phy_write(dev, 0x1e, val); + + return 0; +} + +static int bcm54220_phy_fixup(struct phy_device *dev) +{ + /* enable RXC skew select RGMII copper mode */ + phy_write(dev, 0x1e, 0x21); + phy_write(dev, 0x1f, 0x7ea8); + phy_write(dev, 0x1e, 0x2f); + phy_write(dev, 0x1f, 0x71b7); + + return 0; +} + +#define PHY_ID_AR8031 0x004dd074 +#define PHY_ID_BCM54220 0x600d8589 + +static void __init imx7d_enet_phy_init(void) +{ + if (IS_BUILTIN(CONFIG_PHYLIB)) { + phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff, + ar8031_phy_fixup); + phy_register_fixup_for_uid(PHY_ID_BCM54220, 0xffffffff, + bcm54220_phy_fixup); + } +} + +static void __init imx7d_enet_clk_sel(void) +{ + struct regmap *gpr; + + gpr = syscon_regmap_lookup_by_compatible("fsl,imx7d-iomuxc-gpr"); + if (!IS_ERR(gpr)) { + regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_TX_CLK_SEL_MASK, 0); + regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_CLK_DIR_MASK, 0); + } else { + pr_err("failed to find fsl,imx7d-iomux-gpr regmap\n"); + } +} + +static inline void imx7d_enet_init(void) +{ + imx7d_enet_phy_init(); + imx7d_enet_clk_sel(); +} + static void __init imx7d_init_machine(void) { struct device *parent; @@ -22,6 +95,7 @@ static void __init imx7d_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); imx_anatop_init(); + imx7d_enet_init(); } static void __init imx7d_init_irq(void) diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 8ff8fc0b261c..4470376af5f8 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -93,6 +93,7 @@ struct imx6_pm_socdata { const char *src_compat; const char *iomuxc_compat; const char *gpc_compat; + const char *pl310_compat; const u32 mmdc_io_num; const u32 *mmdc_io_offset; }; @@ -137,11 +138,19 @@ static const u32 imx6sx_mmdc_io_offset[] __initconst = { 0x330, 0x334, 0x338, 0x33c, /* SDQS0 ~ SDQS3 */ }; +static const u32 imx6ul_mmdc_io_offset[] __initconst = { + 0x244, 0x248, 0x24c, 0x250, /* DQM0, DQM1, RAS, CAS */ + 0x27c, 0x498, 0x4a4, 0x490, /* SDCLK0, GPR_B0DS-B1DS, GPR_ADDS */ + 0x280, 0x284, 0x260, 0x264, /* SDQS0~1, SODT0, SODT1 */ + 0x494, 0x4b0, /* MODE_CTL, MODE, */ +}; + static const struct imx6_pm_socdata imx6q_pm_data __initconst = { .mmdc_compat = "fsl,imx6q-mmdc", .src_compat = "fsl,imx6q-src", .iomuxc_compat = "fsl,imx6q-iomuxc", .gpc_compat = "fsl,imx6q-gpc", + .pl310_compat = "arm,pl310-cache", .mmdc_io_num = ARRAY_SIZE(imx6q_mmdc_io_offset), .mmdc_io_offset = imx6q_mmdc_io_offset, }; @@ -151,6 +160,7 @@ static const struct imx6_pm_socdata imx6dl_pm_data __initconst = { .src_compat = "fsl,imx6q-src", .iomuxc_compat = "fsl,imx6dl-iomuxc", .gpc_compat = "fsl,imx6q-gpc", + .pl310_compat = "arm,pl310-cache", .mmdc_io_num = ARRAY_SIZE(imx6dl_mmdc_io_offset), .mmdc_io_offset = imx6dl_mmdc_io_offset, }; @@ -160,6 +170,7 @@ static const struct imx6_pm_socdata imx6sl_pm_data __initconst = { .src_compat = "fsl,imx6sl-src", .iomuxc_compat = "fsl,imx6sl-iomuxc", .gpc_compat = "fsl,imx6sl-gpc", + .pl310_compat = "arm,pl310-cache", .mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset), .mmdc_io_offset = imx6sl_mmdc_io_offset, }; @@ -169,10 +180,21 @@ static const struct imx6_pm_socdata imx6sx_pm_data __initconst = { .src_compat = "fsl,imx6sx-src", .iomuxc_compat = "fsl,imx6sx-iomuxc", .gpc_compat = "fsl,imx6sx-gpc", + .pl310_compat = "arm,pl310-cache", .mmdc_io_num = ARRAY_SIZE(imx6sx_mmdc_io_offset), .mmdc_io_offset = imx6sx_mmdc_io_offset, }; +static const struct imx6_pm_socdata imx6ul_pm_data __initconst = { + .mmdc_compat = "fsl,imx6ul-mmdc", + .src_compat = "fsl,imx6ul-src", + .iomuxc_compat = "fsl,imx6ul-iomuxc", + .gpc_compat = "fsl,imx6ul-gpc", + .pl310_compat = NULL, + .mmdc_io_num = ARRAY_SIZE(imx6ul_mmdc_io_offset), + .mmdc_io_offset = imx6ul_mmdc_io_offset, +}; + /* * This structure is for passing necessary data for low level ocram * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct @@ -290,7 +312,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) val |= BM_CLPCR_SBYOS; if (cpu_is_imx6sl()) val |= BM_CLPCR_BYPASS_PMIC_READY; - if (cpu_is_imx6sl() || cpu_is_imx6sx()) + if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul()) val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; else val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; @@ -330,6 +352,10 @@ static int imx6q_suspend_finish(unsigned long val) * as we need to float DDR IO. */ local_flush_tlb_all(); + /* check if need to flush internal L2 cache */ + if (!((struct imx6_cpu_pm_info *) + suspend_ocram_base)->l2_base.vbase) + flush_cache_all(); imx6_suspend_in_ocram_fn(suspend_ocram_base); } @@ -470,6 +496,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) suspend_ocram_base = __arm_ioremap_exec(ocram_pbase, MX6Q_SUSPEND_OCRAM_SIZE, false); + memset(suspend_ocram_base, 0, sizeof(*pm_info)); pm_info = suspend_ocram_base; pm_info->pbase = ocram_pbase; pm_info->resume_addr = virt_to_phys(v7_cpu_resume); @@ -505,11 +532,13 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) goto gpc_map_failed; } - ret = imx6_pm_get_base(&pm_info->l2_base, "arm,pl310-cache"); - if (ret) { - pr_warn("%s: failed to get pl310-cache base %d!\n", - __func__, ret); - goto pl310_cache_map_failed; + if (socdata->pl310_compat) { + ret = imx6_pm_get_base(&pm_info->l2_base, socdata->pl310_compat); + if (ret) { + pr_warn("%s: failed to get pl310-cache base %d!\n", + __func__, ret); + goto pl310_cache_map_failed; + } } pm_info->ddr_type = imx_mmdc_get_ddr_type(); @@ -610,3 +639,8 @@ void __init imx6sx_pm_init(void) { imx6_pm_common_init(&imx6sx_pm_data); } + +void __init imx6ul_pm_init(void) +{ + imx6_pm_common_init(&imx6ul_pm_data); +} diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index b99987b023fa..76ee2ceec8d5 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -79,12 +79,15 @@ /* sync L2 cache to drain L2's buffers to DRAM. */ #ifdef CONFIG_CACHE_L2X0 ldr r11, [r0, #PM_INFO_MX6Q_L2_V_OFFSET] + teq r11, #0 + beq 6f mov r6, #0x0 str r6, [r11, #L2X0_CACHE_SYNC] 1: ldr r6, [r11, #L2X0_CACHE_SYNC] ands r6, r6, #0x1 bne 1b +6: #endif .endm diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index e288010522f9..c279293f084c 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -97,6 +97,9 @@ static long long __init keystone_pv_fixup(void) } static const char *const keystone_match[] __initconst = { + "ti,k2hk", + "ti,k2e", + "ti,k2l", "ti,keystone", NULL, }; diff --git a/arch/arm/mach-mediatek/Makefile b/arch/arm/mach-mediatek/Makefile index 43e619f56172..21164605b83f 100644 --- a/arch/arm/mach-mediatek/Makefile +++ b/arch/arm/mach-mediatek/Makefile @@ -1 +1,4 @@ +ifeq ($(CONFIG_SMP),y) +obj-$(CONFIG_ARCH_MEDIATEK) += platsmp.o +endif obj-$(CONFIG_ARCH_MEDIATEK) += mediatek.o diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c index a9549005097e..d019a080a559 100644 --- a/arch/arm/mach-mediatek/mediatek.c +++ b/arch/arm/mach-mediatek/mediatek.c @@ -16,6 +16,32 @@ */ #include <linux/init.h> #include <asm/mach/arch.h> +#include <linux/of.h> +#include <linux/clk-provider.h> +#include <linux/clocksource.h> + + +#define GPT6_CON_MT65xx 0x10008060 +#define GPT_ENABLE 0x31 + +static void __init mediatek_timer_init(void) +{ + void __iomem *gpt_base; + + if (of_machine_is_compatible("mediatek,mt6589") || + of_machine_is_compatible("mediatek,mt8135") || + of_machine_is_compatible("mediatek,mt8127")) { + /* turn on GPT6 which ungates arch timer clocks */ + gpt_base = ioremap(GPT6_CON_MT65xx, 0x04); + + /* enable clock and set to free-run */ + writel(GPT_ENABLE, gpt_base); + iounmap(gpt_base); + } + + of_clk_init(NULL); + clocksource_probe(); +}; static const char * const mediatek_board_dt_compat[] = { "mediatek,mt6589", @@ -27,4 +53,5 @@ static const char * const mediatek_board_dt_compat[] = { DT_MACHINE_START(MEDIATEK_DT, "Mediatek Cortex-A7 (Device Tree)") .dt_compat = mediatek_board_dt_compat, + .init_time = mediatek_timer_init, MACHINE_END diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c new file mode 100644 index 000000000000..8141f3f8afed --- /dev/null +++ b/arch/arm/mach-mediatek/platsmp.c @@ -0,0 +1,141 @@ +/* + * arch/arm/mach-mediatek/platsmp.c + * + * Copyright (c) 2014 Mediatek Inc. + * Author: Shunli Wang <shunli.wang@mediatek.com> + * Yingjoe Chen <yingjoe.chen@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include <linux/io.h> +#include <linux/memblock.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/string.h> +#include <linux/threads.h> + +#define MTK_MAX_CPU 8 +#define MTK_SMP_REG_SIZE 0x1000 + +struct mtk_smp_boot_info { + unsigned long smp_base; + unsigned int jump_reg; + unsigned int core_keys[MTK_MAX_CPU - 1]; + unsigned int core_regs[MTK_MAX_CPU - 1]; +}; + +static const struct mtk_smp_boot_info mtk_mt8135_tz_boot = { + 0x80002000, 0x3fc, + { 0x534c4131, 0x4c415332, 0x41534c33 }, + { 0x3f8, 0x3f8, 0x3f8 }, +}; + +static const struct mtk_smp_boot_info mtk_mt6589_boot = { + 0x10002000, 0x34, + { 0x534c4131, 0x4c415332, 0x41534c33 }, + { 0x38, 0x3c, 0x40 }, +}; + +static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = { + { .compatible = "mediatek,mt8135", .data = &mtk_mt8135_tz_boot }, + { .compatible = "mediatek,mt8127", .data = &mtk_mt8135_tz_boot }, +}; + +static const struct of_device_id mtk_smp_boot_infos[] __initconst = { + { .compatible = "mediatek,mt6589", .data = &mtk_mt6589_boot }, +}; + +static void __iomem *mtk_smp_base; +static const struct mtk_smp_boot_info *mtk_smp_info; + +static int mtk_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + if (!mtk_smp_base) + return -EINVAL; + + if (!mtk_smp_info->core_keys[cpu-1]) + return -EINVAL; + + writel_relaxed(mtk_smp_info->core_keys[cpu-1], + mtk_smp_base + mtk_smp_info->core_regs[cpu-1]); + + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + return 0; +} + +static void __init __mtk_smp_prepare_cpus(unsigned int max_cpus, int trustzone) +{ + int i, num; + const struct of_device_id *infos; + + if (trustzone) { + num = ARRAY_SIZE(mtk_tz_smp_boot_infos); + infos = mtk_tz_smp_boot_infos; + } else { + num = ARRAY_SIZE(mtk_smp_boot_infos); + infos = mtk_smp_boot_infos; + } + + /* Find smp boot info for this SoC */ + for (i = 0; i < num; i++) { + if (of_machine_is_compatible(infos[i].compatible)) { + mtk_smp_info = infos[i].data; + break; + } + } + + if (!mtk_smp_info) { + pr_err("%s: Device is not supported\n", __func__); + return; + } + + if (trustzone) { + /* smp_base(trustzone-bootinfo) is reserved by device tree */ + mtk_smp_base = phys_to_virt(mtk_smp_info->smp_base); + } else { + mtk_smp_base = ioremap(mtk_smp_info->smp_base, MTK_SMP_REG_SIZE); + if (!mtk_smp_base) { + pr_err("%s: Can't remap %lx\n", __func__, + mtk_smp_info->smp_base); + return; + } + } + + /* + * write the address of slave startup address into the system-wide + * jump register + */ + writel_relaxed(virt_to_phys(secondary_startup_arm), + mtk_smp_base + mtk_smp_info->jump_reg); +} + +static void __init mtk_tz_smp_prepare_cpus(unsigned int max_cpus) +{ + __mtk_smp_prepare_cpus(max_cpus, 1); +} + +static void __init mtk_smp_prepare_cpus(unsigned int max_cpus) +{ + __mtk_smp_prepare_cpus(max_cpus, 0); +} + +static struct smp_operations mt81xx_tz_smp_ops __initdata = { + .smp_prepare_cpus = mtk_tz_smp_prepare_cpus, + .smp_boot_secondary = mtk_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(mt81xx_tz_smp, "mediatek,mt81xx-tz-smp", &mt81xx_tz_smp_ops); + +static struct smp_operations mt6589_smp_ops __initdata = { + .smp_prepare_cpus = mtk_smp_prepare_cpus, + .smp_boot_secondary = mtk_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(mt6589_smp, "mediatek,mt6589-smp", &mt6589_smp_ops); diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index 0743e2059645..5d56f86ae1a4 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -19,4 +19,9 @@ config MACH_MESON8 default ARCH_MESON select MESON6_TIMER +config MACH_MESON8B + bool "Amlogic Meson8b SoCs support" + default ARCH_MESON + select MESON6_TIMER + endif diff --git a/arch/arm/mach-meson/meson.c b/arch/arm/mach-meson/meson.c index 5d6affe6a694..4e2357178625 100644 --- a/arch/arm/mach-meson/meson.c +++ b/arch/arm/mach-meson/meson.c @@ -19,6 +19,7 @@ static const char * const meson_common_board_compat[] = { "amlogic,meson6", "amlogic,meson8", + "amlogic,meson8b", NULL, }; diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 9f739f3cad4c..1648edd515a2 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -22,7 +22,6 @@ #include <linux/dma-mapping.h> #include <linux/memblock.h> #include <linux/mbus.h> -#include <linux/signal.h> #include <linux/slab.h> #include <linux/irqchip.h> #include <asm/hardware/cache-l2x0.h> @@ -105,27 +104,6 @@ static void __init mvebu_memblock_reserve(void) static void __init mvebu_memblock_reserve(void) {} #endif -/* - * Early versions of Armada 375 SoC have a bug where the BootROM - * leaves an external data abort pending. The kernel is hit by this - * data abort as soon as it enters userspace, because it unmasks the - * data aborts at this moment. We register a custom abort handler - * below to ignore the first data abort to work around this - * problem. - */ -static int armada_375_external_abort_wa(unsigned long addr, unsigned int fsr, - struct pt_regs *regs) -{ - static int ignore_first; - - if (!ignore_first && fsr == 0x1406) { - ignore_first = 1; - return 0; - } - - return 1; -} - static void __init mvebu_init_irq(void) { irqchip_init(); @@ -134,17 +112,6 @@ static void __init mvebu_init_irq(void) BUG_ON(mvebu_mbus_dt_init(coherency_available())); } -static void __init external_abort_quirk(void) -{ - u32 dev, rev; - - if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV) - return; - - hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0, - "imprecise external abort"); -} - static void __init i2c_quirk(void) { struct device_node *np; @@ -177,8 +144,6 @@ static void __init mvebu_dt_init(void) { if (of_machine_is_compatible("marvell,armadaxp")) i2c_quirk(); - if (of_machine_is_compatible("marvell,a375-db")) - external_abort_quirk(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index 44eedf331ae7..55348ee5a352 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -40,6 +40,7 @@ unsigned long coherency_phys_base; void __iomem *coherency_base; static void __iomem *coherency_cpu_base; +static void __iomem *cpu_config_base; /* Coherency fabric registers */ #define IO_SYNC_BARRIER_CTL_OFFSET 0x0 @@ -65,6 +66,31 @@ static const struct of_device_id of_coherency_table[] = { int ll_enable_coherency(void); void ll_add_cpu_to_smp_group(void); +#define CPU_CONFIG_SHARED_L2 BIT(16) + +/* + * Disable the "Shared L2 Present" bit in CPU Configuration register + * on Armada XP. + * + * The "Shared L2 Present" bit affects the "level of coherence" value + * in the clidr CP15 register. Cache operation functions such as + * "flush all" and "invalidate all" operate on all the cache levels + * that included in the defined level of coherence. When HW I/O + * coherency is used, this bit causes unnecessary flushes of the L2 + * cache. + */ +static void armada_xp_clear_shared_l2(void) +{ + u32 reg; + + if (!cpu_config_base) + return; + + reg = readl(cpu_config_base); + reg &= ~CPU_CONFIG_SHARED_L2; + writel(reg, cpu_config_base); +} + static int mvebu_hwcc_notifier(struct notifier_block *nb, unsigned long event, void *__dev) { @@ -85,9 +111,24 @@ static struct notifier_block mvebu_hwcc_pci_nb = { .notifier_call = mvebu_hwcc_notifier, }; +static int armada_xp_clear_shared_l2_notifier_func(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + if (action == CPU_STARTING || action == CPU_STARTING_FROZEN) + armada_xp_clear_shared_l2(); + + return NOTIFY_OK; +} + +static struct notifier_block armada_xp_clear_shared_l2_notifier = { + .notifier_call = armada_xp_clear_shared_l2_notifier_func, + .priority = 100, +}; + static void __init armada_370_coherency_init(struct device_node *np) { struct resource res; + struct device_node *cpu_config_np; of_address_to_resource(np, 0, &res); coherency_phys_base = res.start; @@ -100,6 +141,23 @@ static void __init armada_370_coherency_init(struct device_node *np) sync_cache_w(&coherency_phys_base); coherency_base = of_iomap(np, 0); coherency_cpu_base = of_iomap(np, 1); + + cpu_config_np = of_find_compatible_node(NULL, NULL, + "marvell,armada-xp-cpu-config"); + if (!cpu_config_np) + goto exit; + + cpu_config_base = of_iomap(cpu_config_np, 0); + if (!cpu_config_base) { + of_node_put(cpu_config_np); + goto exit; + } + + of_node_put(cpu_config_np); + + register_cpu_notifier(&armada_xp_clear_shared_l2_notifier); + +exit: set_cpu_coherent(); } @@ -204,6 +262,8 @@ int set_cpu_coherent(void) pr_warn("Coherency fabric is not initialized\n"); return 1; } + + armada_xp_clear_shared_l2(); ll_add_cpu_to_smp_group(); return ll_enable_coherency(); } diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index e8fdb9ceedf0..ed8fda4cd055 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -296,11 +296,11 @@ int armada_370_xp_pmsu_idle_enter(unsigned long deepidle) /* Test the CR_C bit and set it if it was cleared */ asm volatile( "mrc p15, 0, r0, c1, c0, 0 \n\t" - "tst r0, #(1 << 2) \n\t" + "tst r0, %0 \n\t" "orreq r0, r0, #(1 << 2) \n\t" "mcreq p15, 0, r0, c1, c0, 0 \n\t" "isb " - : : : "r0"); + : : "Ir" (CR_C) : "r0"); pr_debug("Failed to suspend the system\n"); @@ -379,6 +379,16 @@ static struct notifier_block mvebu_v7_cpu_pm_notifier = { static struct platform_device mvebu_v7_cpuidle_device; +static int broken_idle(struct device_node *np) +{ + if (of_property_read_bool(np, "broken-idle")) { + pr_warn("CPU idle is currently broken: disabling\n"); + return 1; + } + + return 0; +} + static __init int armada_370_cpuidle_init(void) { struct device_node *np; @@ -387,7 +397,9 @@ static __init int armada_370_cpuidle_init(void) np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"); if (!np) return -ENODEV; - of_node_put(np); + + if (broken_idle(np)) + goto end; /* * On Armada 370, there is "a slow exit process from the deep @@ -406,6 +418,8 @@ static __init int armada_370_cpuidle_init(void) mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend; mvebu_v7_cpuidle_device.name = "cpuidle-armada-370"; +end: + of_node_put(np); return 0; } @@ -422,6 +436,10 @@ static __init int armada_38x_cpuidle_init(void) "marvell,armada-380-coherency-fabric"); if (!np) return -ENODEV; + + if (broken_idle(np)) + goto end; + of_node_put(np); np = of_find_compatible_node(NULL, NULL, @@ -430,7 +448,6 @@ static __init int armada_38x_cpuidle_init(void) return -ENODEV; mpsoc_base = of_iomap(np, 0); BUG_ON(!mpsoc_base); - of_node_put(np); /* Set up reset mask when powering down the cpus */ reg = readl(mpsoc_base + MPCORE_RESET_CTL); @@ -450,6 +467,8 @@ static __init int armada_38x_cpuidle_init(void) mvebu_v7_cpuidle_device.dev.platform_data = armada_38x_cpu_suspend; mvebu_v7_cpuidle_device.name = "cpuidle-armada-38x"; +end: + of_node_put(np); return 0; } @@ -460,12 +479,16 @@ static __init int armada_xp_cpuidle_init(void) np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"); if (!np) return -ENODEV; - of_node_put(np); + + if (broken_idle(np)) + goto end; mvebu_cpu_resume = armada_370_xp_cpu_resume; mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend; mvebu_v7_cpuidle_device.name = "cpuidle-armada-xp"; +end: + of_node_put(np); return 0; } diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index cdd05f2e67ee..afb809509140 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -90,13 +90,6 @@ config MACH_OMAP_FSAMPLE Support for TI OMAP 850 F-Sample board. Say Y here if you have such a board. -config MACH_VOICEBLUE - bool "Voiceblue" - depends on ARCH_OMAP1 && ARCH_OMAP15XX - help - Support for Voiceblue GSM/VoIP gateway. Say Y here if you have - such a board. - config MACH_OMAP_PALMTE bool "Palm Tungsten E" depends on ARCH_OMAP1 && ARCH_OMAP15XX diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 3889b6cd211e..0e8ea95ea822 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o board-nand.o obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o \ board-nand.o -obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c deleted file mode 100644 index e960687d0cb1..000000000000 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * linux/arch/arm/mach-omap1/board-voiceblue.c - * - * Modified from board-generic.c - * - * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz> - * - * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/mtd/physmap.h> -#include <linux/notifier.h> -#include <linux/reboot.h> -#include <linux/serial_8250.h> -#include <linux/serial_reg.h> -#include <linux/smc91x.h> -#include <linux/export.h> -#include <linux/reboot.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/board-voiceblue.h> -#include <mach/flash.h> -#include <mach/mux.h> -#include <mach/tc.h> - -#include <mach/hardware.h> -#include <mach/usb.h> - -#include "common.h" - -static struct plat_serial8250_port voiceblue_ports[] = { - { - .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000), - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 1, - .uartclk = 3686400, - }, - { - .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000), - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 1, - .uartclk = 3686400, - }, - { - .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000), - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 1, - .uartclk = 3686400, - }, - { - .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000), - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 1, - .uartclk = 3686400, - }, - { }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM1, -}; - -static int __init ext_uart_init(void) -{ - if (!machine_is_voiceblue()) - return -ENODEV; - - voiceblue_ports[0].irq = gpio_to_irq(12); - voiceblue_ports[1].irq = gpio_to_irq(13); - voiceblue_ports[2].irq = gpio_to_irq(14); - voiceblue_ports[3].irq = gpio_to_irq(15); - serial_device.dev.platform_data = voiceblue_ports; - return platform_device_register(&serial_device); -} -arch_initcall(ext_uart_init); - -static struct physmap_flash_data voiceblue_flash_data = { - .width = 2, - .set_vpp = omap1_set_vpp, -}; - -static struct resource voiceblue_flash_resource = { - .start = OMAP_CS0_PHYS, - .end = OMAP_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device voiceblue_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &voiceblue_flash_data, - }, - .num_resources = 1, - .resource = &voiceblue_flash_resource, -}; - -static struct smc91x_platdata voiceblue_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource voiceblue_smc91x_resources[] = { - [0] = { - .start = OMAP_CS2_PHYS + 0x300, - .end = OMAP_CS2_PHYS + 0x300 + 16, - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device voiceblue_smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &voiceblue_smc91x_info, - }, - .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources), - .resource = voiceblue_smc91x_resources, -}; - -static struct platform_device *voiceblue_devices[] __initdata = { - &voiceblue_flash_device, - &voiceblue_smc91x_device, -}; - -static struct omap_usb_config voiceblue_usb_config __initdata = { - .hmc_mode = 3, - .register_host = 1, - .register_dev = 1, - .pins[0] = 2, - .pins[1] = 6, - .pins[2] = 6, -}; - -#define MACHINE_PANICED 1 -#define MACHINE_REBOOTING 2 -#define MACHINE_REBOOT 4 -static unsigned long machine_state; - -static int panic_event(struct notifier_block *this, unsigned long event, - void *ptr) -{ - if (test_and_set_bit(MACHINE_PANICED, &machine_state)) - return NOTIFY_DONE; - - /* Flash power LED */ - omap_writeb(0x78, OMAP_LPG1_LCR); - omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */ - - return NOTIFY_DONE; -} - -static struct notifier_block panic_block = { - .notifier_call = panic_event, -}; - -static int __init voiceblue_setup(void) -{ - if (!machine_is_voiceblue()) - return -ENODEV; - - /* Setup panic notifier */ - atomic_notifier_chain_register(&panic_notifier_list, &panic_block); - - return 0; -} -postcore_initcall(voiceblue_setup); - -static int wdt_gpio_state; - -void voiceblue_wdt_enable(void) -{ - gpio_direction_output(0, 0); - gpio_set_value(0, 1); - gpio_set_value(0, 0); - wdt_gpio_state = 0; -} - -void voiceblue_wdt_disable(void) -{ - gpio_set_value(0, 0); - gpio_set_value(0, 1); - gpio_set_value(0, 0); - gpio_direction_input(0); -} - -void voiceblue_wdt_ping(void) -{ - if (test_bit(MACHINE_REBOOT, &machine_state)) - return; - - wdt_gpio_state = !wdt_gpio_state; - gpio_set_value(0, wdt_gpio_state); -} - -static void voiceblue_restart(enum reboot_mode mode, const char *cmd) -{ - /* - * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 - * "Global Software Reset Affects Traffic Controller Frequency". - */ - if (cpu_is_omap5912()) { - omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL); - omap_writew(0x8, ARM_RSTCT1); - } - - set_bit(MACHINE_REBOOT, &machine_state); - voiceblue_wdt_enable(); - while (1) ; -} - -EXPORT_SYMBOL(voiceblue_wdt_enable); -EXPORT_SYMBOL(voiceblue_wdt_disable); -EXPORT_SYMBOL(voiceblue_wdt_ping); - -static void __init voiceblue_init(void) -{ - /* mux pins for uarts */ - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - - /* Watchdog */ - gpio_request(0, "Watchdog"); - /* smc91x reset */ - gpio_request(7, "SMC91x reset"); - gpio_direction_output(7, 1); - udelay(2); /* wait at least 100ns */ - gpio_set_value(7, 0); - mdelay(50); /* 50ms until PHY ready */ - /* smc91x interrupt pin */ - gpio_request(8, "SMC91x irq"); - /* 16C554 reset*/ - gpio_request(6, "16C554 reset"); - gpio_direction_output(6, 0); - /* 16C554 interrupt pins */ - gpio_request(12, "16C554 irq"); - gpio_request(13, "16C554 irq"); - gpio_request(14, "16C554 irq"); - gpio_request(15, "16C554 irq"); - irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING); - irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); - irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); - irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING); - - voiceblue_smc91x_resources[1].start = gpio_to_irq(8); - voiceblue_smc91x_resources[1].end = gpio_to_irq(8); - platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); - omap_serial_init(); - omap1_usb_init(&voiceblue_usb_config); - omap_register_i2c_bus(1, 100, NULL, 0); - - /* There is a good chance board is going up, so enable power LED - * (it is connected through invertor) */ - omap_writeb(0x00, OMAP_LPG1_LCR); - omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ -} - -MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") - /* Maintainer: Ladislav Michl <michl@2n.cz> */ - .atag_offset = 0x100, - .map_io = omap15xx_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = voiceblue_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = voiceblue_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/include/mach/board-voiceblue.h b/arch/arm/mach-omap1/include/mach/board-voiceblue.h deleted file mode 100644 index 27916b210f57..000000000000 --- a/arch/arm/mach-omap1/include/mach/board-voiceblue.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz> - * - * Hardware definitions for OMAP5910 based VoiceBlue board. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_VOICEBLUE_H -#define __ASM_ARCH_VOICEBLUE_H - -extern void voiceblue_wdt_enable(void); -extern void voiceblue_wdt_disable(void); -extern void voiceblue_wdt_ping(void); - -#endif /* __ASM_ARCH_VOICEBLUE_H */ - diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 33d1460a5639..5076d3f334d2 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -96,8 +96,8 @@ config ARCH_OMAP2PLUS select OMAP_GPMC select PINCTRL select SOC_BUS - select TI_PRIV_EDMA select OMAP_IRQCHIP + select CLKSRC_TI_32K help Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 935869698cbc..ceefcee6bb85 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -48,11 +48,9 @@ AFLAGS_sleep44xx.o :=-Wa,-march=armv7-a$(plus_sec) # Functions loaded to SRAM obj-$(CONFIG_SOC_OMAP2420) += sram242x.o obj-$(CONFIG_SOC_OMAP2430) += sram243x.o -obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o AFLAGS_sram242x.o :=-Wa,-march=armv6 AFLAGS_sram243x.o :=-Wa,-march=armv6 -AFLAGS_sram34xx.o :=-Wa,-march=armv7-a # Restart code (OMAP4/5 currently in omap4-common.c) obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o @@ -186,7 +184,6 @@ obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) -obj-$(CONFIG_ARCH_OMAP3) += clkt34xx_dpll3m2.o obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) obj-$(CONFIG_SOC_AM33XX) += $(clock-common) obj-$(CONFIG_SOC_OMAP5) += $(clock-common) diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index fb219a30c10c..04a56cc04dfa 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -46,7 +46,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_machine = omap_generic_init, - .init_time = omap2_sync32k_timer_init, + .init_time = omap_init_time, .dt_compat = omap242x_boards_compat, .restart = omap2xxx_restart, MACHINE_END @@ -63,7 +63,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)") .map_io = omap243x_map_io, .init_early = omap2430_init_early, .init_machine = omap_generic_init, - .init_time = omap2_sync32k_timer_init, + .init_time = omap_init_time, .dt_compat = omap243x_boards_compat, .restart = omap2xxx_restart, MACHINE_END @@ -82,7 +82,7 @@ DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board") .init_early = omap3430_init_early, .init_machine = omap_generic_init, .init_late = omap3_init_late, - .init_time = omap3_sync32k_timer_init, + .init_time = omap_init_time, .dt_compat = n900_boards_compat, .restart = omap3xxx_restart, MACHINE_END @@ -100,7 +100,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .init_early = omap3430_init_early, .init_machine = omap_generic_init, .init_late = omap3_init_late, - .init_time = omap3_sync32k_timer_init, + .init_time = omap_init_time, .dt_compat = omap3_boards_compat, .restart = omap3xxx_restart, MACHINE_END @@ -117,7 +117,7 @@ DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)") .init_early = omap3630_init_early, .init_machine = omap_generic_init, .init_late = omap3_init_late, - .init_time = omap3_sync32k_timer_init, + .init_time = omap_init_time, .dt_compat = omap36xx_boards_compat, .restart = omap3xxx_restart, MACHINE_END @@ -276,7 +276,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)") .init_late = am43xx_init_late, .init_irq = omap_gic_of_init, .init_machine = omap_generic_init, - .init_time = omap3_gptimer_timer_init, + .init_time = omap4_local_timer_init, .dt_compat = am43_boards_compat, .restart = omap44xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index c2975af4cd5d..d9c3ffc39329 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -424,6 +424,6 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board") .init_irq = omap3_init_irq, .init_machine = omap_ldp_init, .init_late = omap3430_init_late, - .init_time = omap3_sync32k_timer_init, + .init_time = omap_init_time, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 2d1e5a6beb85..41161ca97d74 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -136,6 +136,6 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") .init_irq = omap3_init_irq, .init_machine = rx51_init, .init_late = omap3430_init_late, - .init_time = omap3_sync32k_timer_init, + .init_time = omap_init_time, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c deleted file mode 100644 index 3f6521313c93..000000000000 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * OMAP34xx M2 divider clock code - * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2010 Nokia Corporation - * - * Paul Walmsley - * Jouni Högander - * - * Parts of this code are based on code written by - * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include "clock.h" -#include "clock3xxx.h" -#include "sdrc.h" -#include "sram.h" - -#define CYCLES_PER_MHZ 1000000 - -struct clk *sdrc_ick_p, *arm_fck_p; - -/* - * CORE DPLL (DPLL3) M2 divider rate programming functions - * - * These call into SRAM code to do the actual CM writes, since the SDRAM - * is clocked from DPLL3. - */ - -/** - * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider - * @clk: struct clk * of DPLL to set - * @rate: rounded target rate - * - * Program the DPLL M2 divider with the rounded target rate. Returns - * -EINVAL upon error, or 0 upon success. - */ -int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 new_div = 0; - u32 unlock_dll = 0; - u32 c; - unsigned long validrate, sdrcrate, _mpurate; - struct omap_sdrc_params *sdrc_cs0; - struct omap_sdrc_params *sdrc_cs1; - int ret; - unsigned long clkrate; - - if (!clk || !rate) - return -EINVAL; - - new_div = DIV_ROUND_UP(parent_rate, rate); - validrate = parent_rate / new_div; - - if (validrate != rate) - return -EINVAL; - - sdrcrate = clk_get_rate(sdrc_ick_p); - clkrate = clk_hw_get_rate(hw); - if (rate > clkrate) - sdrcrate <<= ((rate / clkrate) >> 1); - else - sdrcrate >>= ((clkrate / rate) >> 1); - - ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1); - if (ret) - return -EINVAL; - - if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) { - pr_debug("clock: will unlock SDRC DLL\n"); - unlock_dll = 1; - } - - /* - * XXX This only needs to be done when the CPU frequency changes - */ - _mpurate = clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ; - c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT; - c += 1; /* for safety */ - c *= SDRC_MPURATE_LOOPS; - c >>= SDRC_MPURATE_SCALE; - if (c == 0) - c = 1; - - pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", - clkrate, validrate); - pr_debug("clock: SDRC CS0 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", - sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, - sdrc_cs0->actim_ctrlb, sdrc_cs0->mr); - if (sdrc_cs1) - pr_debug("clock: SDRC CS1 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", - sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, - sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); - - if (sdrc_cs1) - omap3_configure_core_dpll( - new_div, unlock_dll, c, rate > clkrate, - sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, - sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, - sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, - sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); - else - omap3_configure_core_dpll( - new_div, unlock_dll, c, rate > clkrate, - sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, - sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, - 0, 0, 0, 0); - return 0; -} - diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 92e92cfc2775..0cba9575d2ca 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -88,8 +88,7 @@ static inline int omap_mux_late_init(void) extern void omap2_init_common_infrastructure(void); -extern void omap2_sync32k_timer_init(void); -extern void omap3_sync32k_timer_init(void); +extern void omap_init_time(void); extern void omap3_secure_sync32k_timer_init(void); extern void omap3_gptimer_timer_init(void); extern void omap4_local_timer_init(void); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index a69bd67e9028..9374da313e8e 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -33,7 +33,6 @@ #include "common.h" #include "mux.h" #include "control.h" -#include "devices.h" #include "display.h" #define L3_MODULES_MAX_LEN 12 @@ -67,58 +66,6 @@ static int __init omap3_l3_init(void) } omap_postcore_initcall(omap3_l3_init); -#if defined(CONFIG_IOMMU_API) - -#include <linux/platform_data/iommu-omap.h> - -static struct resource omap3isp_resources[] = { - { - .start = OMAP3430_ISP_BASE, - .end = OMAP3430_ISP_BASE + 0x12fc, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP3430_ISP_BASE2, - .end = OMAP3430_ISP_BASE2 + 0x0600, - .flags = IORESOURCE_MEM, - }, - { - .start = 24 + OMAP_INTC_START, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device omap3isp_device = { - .name = "omap3isp", - .id = -1, - .num_resources = ARRAY_SIZE(omap3isp_resources), - .resource = omap3isp_resources, -}; - -static struct omap_iommu_arch_data omap3_isp_iommu = { - .name = "mmu_isp", -}; - -int omap3_init_camera(struct isp_platform_data *pdata) -{ - if (of_have_populated_dt()) - omap3_isp_iommu.name = "480bd400.mmu"; - - omap3isp_device.dev.platform_data = pdata; - omap3isp_device.dev.archdata.iommu = &omap3_isp_iommu; - - return platform_device_register(&omap3isp_device); -} - -#else /* !CONFIG_IOMMU_API */ - -int omap3_init_camera(struct isp_platform_data *pdata) -{ - return 0; -} - -#endif - #if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE) static inline void __init omap_init_mbox(void) { diff --git a/arch/arm/mach-omap2/devices.h b/arch/arm/mach-omap2/devices.h deleted file mode 100644 index f61eb6e5d136..000000000000 --- a/arch/arm/mach-omap2/devices.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-omap2/devices.h - * - * OMAP2 platform device setup/initialization - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __ARCH_ARM_MACH_OMAP_DEVICES_H -#define __ARCH_ARM_MACH_OMAP_DEVICES_H - -struct isp_platform_data; - -int omap3_init_camera(struct isp_platform_data *pdata); - -#endif diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 54a5ba54d2ff..8a2ae82cb227 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -57,15 +57,15 @@ int omap_type(void) if (val < OMAP2_DEVICETYPE_MASK) return val; - if (cpu_is_omap24xx()) { + if (soc_is_omap24xx()) { val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); - } else if (cpu_is_ti81xx()) { + } else if (soc_is_ti81xx()) { val = omap_ctrl_readl(TI81XX_CONTROL_STATUS); } else if (soc_is_am33xx() || soc_is_am43xx()) { val = omap_ctrl_readl(AM33XX_CONTROL_STATUS); - } else if (cpu_is_omap34xx()) { + } else if (soc_is_omap34xx()) { val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS); - } else if (cpu_is_omap44xx()) { + } else if (soc_is_omap44xx()) { val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS); } else if (soc_is_omap54xx() || soc_is_dra7xx()) { val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS); @@ -122,7 +122,7 @@ static u16 tap_prod_id; void omap_get_die_id(struct omap_die_id *odi) { - if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) { + if (soc_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) { odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0); odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1); odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2); @@ -218,17 +218,17 @@ static void __init omap3_cpuinfo(void) * on available features. Upon detection, update the CPU id * and CPU class bits. */ - if (cpu_is_omap3630()) { + if (soc_is_omap3630()) { cpu_name = "OMAP3630"; } else if (soc_is_am35xx()) { cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505"; - } else if (cpu_is_ti816x()) { + } else if (soc_is_ti816x()) { cpu_name = "TI816X"; } else if (soc_is_am335x()) { cpu_name = "AM335X"; } else if (soc_is_am437x()) { cpu_name = "AM437x"; - } else if (cpu_is_ti814x()) { + } else if (soc_is_ti814x()) { cpu_name = "TI814X"; } else if (omap3_has_iva() && omap3_has_sgx()) { /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */ @@ -275,11 +275,11 @@ void __init omap3xxx_check_features(void) OMAP3_CHECK_FEATURE(status, SGX); OMAP3_CHECK_FEATURE(status, NEON); OMAP3_CHECK_FEATURE(status, ISP); - if (cpu_is_omap3630()) + if (soc_is_omap3630()) omap_features |= OMAP3_HAS_192MHZ_CLK; - if (cpu_is_omap3430() || cpu_is_omap3630()) + if (soc_is_omap3430() || soc_is_omap3630()) omap_features |= OMAP3_HAS_IO_WAKEUP; - if (cpu_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 || + if (soc_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 || omap_rev() == OMAP3430_REV_ES3_1_2) omap_features |= OMAP3_HAS_IO_CHAIN_CTRL; @@ -701,7 +701,7 @@ void __init omap2_set_globals_tap(u32 class, void __iomem *tap) tap_base = tap; /* XXX What is this intended to do? */ - if (cpu_is_omap34xx()) + if (soc_is_omap34xx()) tap_prod_id = 0x0210; else tap_prod_id = 0x0208; @@ -719,11 +719,11 @@ static const char * const omap_types[] = { static const char * __init omap_get_family(void) { - if (cpu_is_omap24xx()) + if (soc_is_omap24xx()) return kasprintf(GFP_KERNEL, "OMAP2"); - else if (cpu_is_omap34xx()) + else if (soc_is_omap34xx()) return kasprintf(GFP_KERNEL, "OMAP3"); - else if (cpu_is_omap44xx()) + else if (soc_is_omap44xx()) return kasprintf(GFP_KERNEL, "OMAP4"); else if (soc_is_omap54xx()) return kasprintf(GFP_KERNEL, "OMAP5"); diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index 971791fe9a3f..593fec753b28 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -27,7 +27,7 @@ * platform-specific code to shutdown a CPU * Called with IRQs disabled */ -void __ref omap4_cpu_die(unsigned int cpu) +void omap4_cpu_die(unsigned int cpu) { unsigned int boot_cpu = 0; void __iomem *base = omap_get_wakeupgen_base(); diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index db7e0bab3587..f397bd6bd6e3 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -20,6 +20,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/irqdomain.h> #include <linux/of_address.h> #include <linux/platform_device.h> @@ -330,7 +331,7 @@ static int irq_cpu_hotplug_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __refdata irq_hotplug_notifier = { +static struct notifier_block irq_hotplug_notifier = { .notifier_call = irq_cpu_hotplug_notify, }; @@ -540,9 +541,4 @@ static int __init wakeupgen_init(struct device_node *node, return 0; } - -/* - * We cannot use the IRQCHIP_DECLARE macro that lives in - * drivers/irqchip, so we're forced to roll our own. Not very nice. - */ -OF_DECLARE_2(irqchip, ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init); +IRQCHIP_DECLARE(ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init); diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c index 8f5989d48a80..1c210cb2b8c1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c @@ -152,20 +152,10 @@ struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = { - { - .pa_start = 0x48080000, - .pa_end = 0x48080000 + SZ_8K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - struct omap_hwmod_ocp_if am33xx_l4_ls__elm = { .master = &am33xx_l4_ls_hwmod, .slave = &am33xx_elm_hwmod, .clk = "l4ls_gclk", - .addr = am33xx_elm_addr_space, .user = OCP_USER_MPU, }; @@ -285,20 +275,10 @@ struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = { }; /* l3s cfg -> gpmc */ -static struct omap_hwmod_addr_space am33xx_gpmc_addr_space[] = { - { - .pa_start = 0x50000000, - .pa_end = 0x50000000 + SZ_8K - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = { .master = &am33xx_l3_s_hwmod, .slave = &am33xx_gpmc_hwmod, .clk = "l3s_gclk", - .addr = am33xx_gpmc_addr_space, .user = OCP_USER_MPU, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index dc55f8dedf2c..aff78d5198d2 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -26,7 +26,6 @@ #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/iommu-omap.h> -#include <linux/platform_data/mailbox-omap.h> #include <plat/dmtimer.h> #include "soc.h" @@ -1506,26 +1505,9 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = { .sysc = &omap3xxx_mailbox_sysc, }; -static struct omap_mbox_dev_info omap3xxx_mailbox_info[] = { - { .name = "dsp", .tx_id = 0, .rx_id = 1 }, -}; - -static struct omap_mbox_pdata omap3xxx_mailbox_attrs = { - .num_users = 2, - .num_fifos = 2, - .info_cnt = ARRAY_SIZE(omap3xxx_mailbox_info), - .info = omap3xxx_mailbox_info, -}; - -static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = { - { .irq = 26 + OMAP_INTC_START, }, - { .irq = -1 }, -}; - static struct omap_hwmod omap3xxx_mailbox_hwmod = { .name = "mailbox", .class = &omap3xxx_mailbox_hwmod_class, - .mpu_irqs = omap3xxx_mailbox_irqs, .main_clk = "mailboxes_ick", .prcm = { .omap2 = { @@ -1536,7 +1518,6 @@ static struct omap_hwmod omap3xxx_mailbox_hwmod = { .idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT, }, }, - .dev_attr = &omap3xxx_mailbox_attrs, }; /* @@ -3276,20 +3257,10 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space omap3xxx_mailbox_addrs[] = { - { - .pa_start = 0x48094000, - .pa_end = 0x480941ff, - .flags = ADDR_TYPE_RT, - }, - { } -}; - /* l4_core -> mailbox */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__mailbox = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_mailbox_hwmod, - .addr = omap3xxx_mailbox_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 43eebf2c59e2..a5e444b1e57a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -4471,21 +4471,11 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_mpu = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap44xx_spinlock_addrs[] = { - { - .pa_start = 0x4a0f6000, - .pa_end = 0x4a0f6fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_cfg -> spinlock */ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__spinlock = { .master = &omap44xx_l4_cfg_hwmod, .slave = &omap44xx_spinlock_hwmod, .clk = "l4_div_ck", - .addr = omap44xx_spinlock_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 7c3fac035e93..8cdfd9b7ab4f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -1844,8 +1844,7 @@ static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSC_HAS_RESET_STATUS), + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART | MSTANDBY_SMART_WKUP), diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 562247bced49..51d1ecb384bd 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -2566,21 +2566,11 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space dra7xx_elm_addrs[] = { - { - .pa_start = 0x48078000, - .pa_end = 0x48078fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_per1 -> elm */ static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = { .master = &dra7xx_l4_per1_hwmod, .slave = &dra7xx_elm_hwmod, .clk = "l3_iclk_div", - .addr = dra7xx_elm_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2648,21 +2638,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio8 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space dra7xx_gpmc_addrs[] = { - { - .pa_start = 0x50000000, - .pa_end = 0x500003ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l3_main_1 -> gpmc */ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = { .master = &dra7xx_l3_main_1_hwmod, .slave = &dra7xx_gpmc_hwmod, .clk = "l3_iclk_div", - .addr = dra7xx_gpmc_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3029,21 +3009,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__smartreflex_mpu = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space dra7xx_spinlock_addrs[] = { - { - .pa_start = 0x4a0f6000, - .pa_end = 0x4a0f6fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_cfg -> spinlock */ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__spinlock = { .master = &dra7xx_l4_cfg_hwmod, .slave = &dra7xx_spinlock_hwmod, .clk = "l3_iclk_div", - .addr = dra7xx_spinlock_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index d697cecf762b..178e22c146b7 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -210,7 +210,7 @@ static inline int omap4plus_init_static_deps(const struct static_dep_map *map) } map++; - }; + } return 0; } diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index d31c495175c1..2e00c7f1f471 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -582,7 +582,7 @@ void __init omap3xxx_powerdomains_init(void) /* Only 81xx needs custom pwrdm_operations */ if (!cpu_is_ti81xx()) - pwrdm_register_platform_funcs(&omap3_pwrdm_operations);; + pwrdm_register_platform_funcs(&omap3_pwrdm_operations); rev = omap_rev(); diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 2d1d3845253c..79ca3c3eb2af 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -129,9 +129,9 @@ int omap_type(void); /* * omap_rev bits: - * CPU id bits (0730, 1510, 1710, 2422...) [31:16] - * CPU revision (See _REV_ defined in cpu.h) [15:08] - * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] + * SoC id bits (0730, 1510, 1710, 2422...) [31:16] + * SoC revision (See _REV_ defined in cpu.h) [15:08] + * SoC class bits (15xx, 16xx, 24xx, 34xx...) [07:00] */ unsigned int omap_rev(void); @@ -141,20 +141,20 @@ static inline int soc_is_omap(void) } /* - * Get the CPU revision for OMAP devices + * Get the SoC revision for OMAP devices */ #define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) /* * Macros to group OMAP into cpu classes. * These can be used in most places. - * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 - * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 - * cpu_is_omap243x(): True for OMAP2430 - * cpu_is_omap343x(): True for OMAP3430 - * cpu_is_omap443x(): True for OMAP4430 - * cpu_is_omap446x(): True for OMAP4460 - * cpu_is_omap447x(): True for OMAP4470 + * soc_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 + * soc_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 + * soc_is_omap243x(): True for OMAP2430 + * soc_is_omap343x(): True for OMAP3430 + * soc_is_omap443x(): True for OMAP4430 + * soc_is_omap446x(): True for OMAP4460 + * soc_is_omap447x(): True for OMAP4470 * soc_is_omap543x(): True for OMAP5430, OMAP5432 */ #define GET_OMAP_CLASS (omap_rev() & 0xff) @@ -225,23 +225,23 @@ IS_TI_SUBCLASS(814x, 0x814) IS_AM_SUBCLASS(335x, 0x335) IS_AM_SUBCLASS(437x, 0x437) -#define cpu_is_omap24xx() 0 -#define cpu_is_omap242x() 0 -#define cpu_is_omap243x() 0 -#define cpu_is_omap34xx() 0 -#define cpu_is_omap343x() 0 -#define cpu_is_ti81xx() 0 -#define cpu_is_ti816x() 0 -#define cpu_is_ti814x() 0 +#define soc_is_omap24xx() 0 +#define soc_is_omap242x() 0 +#define soc_is_omap243x() 0 +#define soc_is_omap34xx() 0 +#define soc_is_omap343x() 0 +#define soc_is_ti81xx() 0 +#define soc_is_ti816x() 0 +#define soc_is_ti814x() 0 #define soc_is_am35xx() 0 #define soc_is_am33xx() 0 #define soc_is_am335x() 0 #define soc_is_am43xx() 0 #define soc_is_am437x() 0 -#define cpu_is_omap44xx() 0 -#define cpu_is_omap443x() 0 -#define cpu_is_omap446x() 0 -#define cpu_is_omap447x() 0 +#define soc_is_omap44xx() 0 +#define soc_is_omap443x() 0 +#define soc_is_omap446x() 0 +#define soc_is_omap447x() 0 #define soc_is_omap54xx() 0 #define soc_is_omap543x() 0 #define soc_is_dra7xx() 0 @@ -250,54 +250,54 @@ IS_AM_SUBCLASS(437x, 0x437) #if defined(MULTI_OMAP2) # if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() is_omap24xx() +# undef soc_is_omap24xx +# define soc_is_omap24xx() is_omap24xx() # endif # if defined (CONFIG_SOC_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() is_omap242x() +# undef soc_is_omap242x +# define soc_is_omap242x() is_omap242x() # endif # if defined (CONFIG_SOC_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() is_omap243x() +# undef soc_is_omap243x +# define soc_is_omap243x() is_omap243x() # endif # if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap34xx -# undef cpu_is_omap343x -# define cpu_is_omap34xx() is_omap34xx() -# define cpu_is_omap343x() is_omap343x() +# undef soc_is_omap34xx +# undef soc_is_omap343x +# define soc_is_omap34xx() is_omap34xx() +# define soc_is_omap343x() is_omap343x() # endif #else # if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() 1 +# undef soc_is_omap24xx +# define soc_is_omap24xx() 1 # endif # if defined(CONFIG_SOC_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() 1 +# undef soc_is_omap242x +# define soc_is_omap242x() 1 # endif # if defined(CONFIG_SOC_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() 1 +# undef soc_is_omap243x +# define soc_is_omap243x() 1 # endif # if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap34xx -# define cpu_is_omap34xx() 1 +# undef soc_is_omap34xx +# define soc_is_omap34xx() 1 # endif # if defined(CONFIG_SOC_OMAP3430) -# undef cpu_is_omap343x -# define cpu_is_omap343x() 1 +# undef soc_is_omap343x +# define soc_is_omap343x() 1 # endif #endif /* * Macros to detect individual cpu types. * These are only rarely needed. - * cpu_is_omap2420(): True for OMAP2420 - * cpu_is_omap2422(): True for OMAP2422 - * cpu_is_omap2423(): True for OMAP2423 - * cpu_is_omap2430(): True for OMAP2430 - * cpu_is_omap3430(): True for OMAP3430 + * soc_is_omap2420(): True for OMAP2420 + * soc_is_omap2422(): True for OMAP2422 + * soc_is_omap2423(): True for OMAP2423 + * soc_is_omap2430(): True for OMAP2430 + * soc_is_omap3430(): True for OMAP3430 */ #define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) @@ -313,51 +313,51 @@ IS_OMAP_TYPE(2423, 0x2423) IS_OMAP_TYPE(2430, 0x2430) IS_OMAP_TYPE(3430, 0x3430) -#define cpu_is_omap2420() 0 -#define cpu_is_omap2422() 0 -#define cpu_is_omap2423() 0 -#define cpu_is_omap2430() 0 -#define cpu_is_omap3430() 0 -#define cpu_is_omap3630() 0 +#define soc_is_omap2420() 0 +#define soc_is_omap2422() 0 +#define soc_is_omap2423() 0 +#define soc_is_omap2430() 0 +#define soc_is_omap3430() 0 +#define soc_is_omap3630() 0 #define soc_is_omap5430() 0 /* These are needed for the common code */ #ifdef CONFIG_ARCH_OMAP2PLUS -#define cpu_is_omap7xx() 0 -#define cpu_is_omap15xx() 0 -#define cpu_is_omap16xx() 0 -#define cpu_is_omap1510() 0 -#define cpu_is_omap1610() 0 -#define cpu_is_omap1611() 0 -#define cpu_is_omap1621() 0 -#define cpu_is_omap1710() 0 +#define soc_is_omap7xx() 0 +#define soc_is_omap15xx() 0 +#define soc_is_omap16xx() 0 +#define soc_is_omap1510() 0 +#define soc_is_omap1610() 0 +#define soc_is_omap1611() 0 +#define soc_is_omap1621() 0 +#define soc_is_omap1710() 0 #define cpu_class_is_omap1() 0 #define cpu_class_is_omap2() 1 #endif #if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap2420 -# undef cpu_is_omap2422 -# undef cpu_is_omap2423 -# undef cpu_is_omap2430 -# define cpu_is_omap2420() is_omap2420() -# define cpu_is_omap2422() is_omap2422() -# define cpu_is_omap2423() is_omap2423() -# define cpu_is_omap2430() is_omap2430() +# undef soc_is_omap2420 +# undef soc_is_omap2422 +# undef soc_is_omap2423 +# undef soc_is_omap2430 +# define soc_is_omap2420() is_omap2420() +# define soc_is_omap2422() is_omap2422() +# define soc_is_omap2423() is_omap2423() +# define soc_is_omap2430() is_omap2430() #endif #if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap3430 -# undef cpu_is_ti81xx -# undef cpu_is_ti816x -# undef cpu_is_ti814x +# undef soc_is_omap3430 +# undef soc_is_ti81xx +# undef soc_is_ti816x +# undef soc_is_ti814x # undef soc_is_am35xx -# define cpu_is_omap3430() is_omap3430() -# undef cpu_is_omap3630 -# define cpu_is_omap3630() is_omap363x() -# define cpu_is_ti81xx() is_ti81xx() -# define cpu_is_ti816x() is_ti816x() -# define cpu_is_ti814x() is_ti814x() +# define soc_is_omap3430() is_omap3430() +# undef soc_is_omap3630 +# define soc_is_omap3630() is_omap363x() +# define soc_is_ti81xx() is_ti81xx() +# define soc_is_ti816x() is_ti816x() +# define soc_is_ti814x() is_ti814x() # define soc_is_am35xx() is_am35xx() #endif @@ -376,14 +376,14 @@ IS_OMAP_TYPE(3430, 0x3430) #endif # if defined(CONFIG_ARCH_OMAP4) -# undef cpu_is_omap44xx -# undef cpu_is_omap443x -# undef cpu_is_omap446x -# undef cpu_is_omap447x -# define cpu_is_omap44xx() is_omap44xx() -# define cpu_is_omap443x() is_omap443x() -# define cpu_is_omap446x() is_omap446x() -# define cpu_is_omap447x() is_omap447x() +# undef soc_is_omap44xx +# undef soc_is_omap443x +# undef soc_is_omap446x +# undef soc_is_omap447x +# define soc_is_omap44xx() is_omap44xx() +# define soc_is_omap443x() is_omap443x() +# define soc_is_omap446x() is_omap446x() +# define soc_is_omap447x() is_omap447x() # endif # if defined(CONFIG_SOC_OMAP5) @@ -556,5 +556,22 @@ level(__##fn); #define omap_late_initcall(fn) omap_initcall(late_initcall, fn) #define omap_late_initcall_sync(fn) omap_initcall(late_initcall_sync, fn) -#endif /* __ASSEMBLY__ */ +/* Legacy defines, these can be removed when users are removed */ +#define cpu_is_omap2420() soc_is_omap2420() +#define cpu_is_omap2422() soc_is_omap2422() +#define cpu_is_omap242x() soc_is_omap242x() +#define cpu_is_omap2430() soc_is_omap2430() +#define cpu_is_omap243x() soc_is_omap243x() +#define cpu_is_omap24xx() soc_is_omap24xx() +#define cpu_is_omap3430() soc_is_omap3430() +#define cpu_is_omap343x() soc_is_omap343x() +#define cpu_is_omap34xx() soc_is_omap34xx() +#define cpu_is_omap3630() soc_is_omap3630() +#define cpu_is_omap443x() soc_is_omap443x() +#define cpu_is_omap446x() soc_is_omap446x() +#define cpu_is_omap44xx() soc_is_omap44xx() +#define cpu_is_ti814x() soc_is_ti814x() +#define cpu_is_ti816x() soc_is_ti816x() +#define cpu_is_ti81xx() soc_is_ti81xx() +#endif /* __ASSEMBLY__ */ diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c index cd488b80ba36..83d0e61f49e6 100644 --- a/arch/arm/mach-omap2/sram.c +++ b/arch/arm/mach-omap2/sram.c @@ -211,35 +211,10 @@ static inline int omap243x_sram_init(void) #ifdef CONFIG_ARCH_OMAP3 -static u32 (*_omap3_sram_configure_core_dpll)( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); - -u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) -{ - BUG_ON(!_omap3_sram_configure_core_dpll); - return _omap3_sram_configure_core_dpll( - m2, unlock_dll, f, inc, - sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, - sdrc_actim_ctrl_b_0, sdrc_mr_0, - sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, - sdrc_actim_ctrl_b_1, sdrc_mr_1); -} - void omap3_sram_restore_context(void) { omap_sram_reset(); - _omap3_sram_configure_core_dpll = - omap_sram_push(omap3_sram_configure_core_dpll, - omap3_sram_configure_core_dpll_sz); omap_push_sram_idle(); } diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h index 948d3edefc38..18dc884267fa 100644 --- a/arch/arm/mach-omap2/sram.h +++ b/arch/arm/mach-omap2/sram.h @@ -15,12 +15,6 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); -extern u32 omap3_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); extern void omap3_sram_restore_context(void); /* Do not use these */ @@ -52,14 +46,6 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern unsigned long omap243x_sram_reprogram_sdrc_sz; -extern u32 omap3_sram_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); -extern unsigned long omap3_sram_configure_core_dpll_sz; - #ifdef CONFIG_PM extern void omap_push_sram_idle(void); #else diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S deleted file mode 100644 index 1446331b576a..000000000000 --- a/arch/arm/mach-omap2/sram34xx.S +++ /dev/null @@ -1,346 +0,0 @@ -/* - * linux/arch/arm/mach-omap3/sram.S - * - * Omap3 specific functions that need to be run in internal SRAM - * - * Copyright (C) 2004, 2007, 2008 Texas Instruments, Inc. - * Copyright (C) 2008 Nokia Corporation - * - * Rajendra Nayak <rnayak@ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * Paul Walmsley - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <linux/linkage.h> - -#include <asm/assembler.h> - -#include "soc.h" -#include "iomap.h" -#include "sdrc.h" -#include "cm3xxx.h" - -/* - * This file needs be built unconditionally as ARM to interoperate correctly - * with non-Thumb-2-capable firmware. - */ - .arm - - .text - -/* r1 parameters */ -#define SDRC_NO_UNLOCK_DLL 0x0 -#define SDRC_UNLOCK_DLL 0x1 - -/* SDRC_DLLA_CTRL bit settings */ -#define FIXEDDELAY_SHIFT 24 -#define FIXEDDELAY_MASK (0xff << FIXEDDELAY_SHIFT) -#define DLLIDLE_MASK 0x4 - -/* - * SDRC_DLLA_CTRL default values: TI hardware team indicates that - * FIXEDDELAY should be initialized to 0xf. This apparently was - * empirically determined during process testing, so no derivation - * was provided. - */ -#define FIXEDDELAY_DEFAULT (0x0f << FIXEDDELAY_SHIFT) - -/* SDRC_DLLA_STATUS bit settings */ -#define LOCKSTATUS_MASK 0x4 - -/* SDRC_POWER bit settings */ -#define SRFRONIDLEREQ_MASK 0x40 - -/* CM_IDLEST1_CORE bit settings */ -#define ST_SDRC_MASK 0x2 - -/* CM_ICLKEN1_CORE bit settings */ -#define EN_SDRC_MASK 0x2 - -/* CM_CLKSEL1_PLL bit settings */ -#define CORE_DPLL_CLKOUT_DIV_SHIFT 0x1b - -/* - * omap3_sram_configure_core_dpll - change DPLL3 M2 divider - * - * Params passed in registers: - * r0 = new M2 divider setting (only 1 and 2 supported right now) - * r1 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for - * SDRC rates < 83MHz - * r2 = number of MPU cycles to wait for SDRC to stabilize after - * reprogramming the SDRC when switching to a slower MPU speed - * r3 = increasing SDRC rate? (1 = yes, 0 = no) - * - * Params passed via the stack. The needed params will be copied in SRAM - * before use by the code in SRAM (SDRAM is not accessible during SDRC - * reconfiguration): - * new SDRC_RFR_CTRL_0 register contents - * new SDRC_ACTIM_CTRL_A_0 register contents - * new SDRC_ACTIM_CTRL_B_0 register contents - * new SDRC_MR_0 register value - * new SDRC_RFR_CTRL_1 register contents - * new SDRC_ACTIM_CTRL_A_1 register contents - * new SDRC_ACTIM_CTRL_B_1 register contents - * new SDRC_MR_1 register value - * - * If the param SDRC_RFR_CTRL_1 is 0, the parameters are not programmed into - * the SDRC CS1 registers - * - * NOTE: This code no longer attempts to program the SDRC AC timing and MR - * registers. This is because the code currently cannot ensure that all - * L3 initiators (e.g., sDMA, IVA, DSS DISPC, etc.) are not accessing the - * SDRAM when the registers are written. If the registers are changed while - * an initiator is accessing SDRAM, memory can be corrupted and/or the SDRC - * may enter an unpredictable state. In the future, the intent is to - * re-enable this code in cases where we can ensure that no initiators are - * touching the SDRAM. Until that time, users who know that their use case - * can satisfy the above requirement can enable the CONFIG_OMAP3_SDRC_AC_TIMING - * option. - * - * Richard Woodruff notes that any changes to this code must be carefully - * audited and tested to ensure that they don't cause a TLB miss while - * the SDRAM is inaccessible. Such a situation will crash the system - * since it will cause the ARM MMU to attempt to walk the page tables. - * These crashes may be intermittent. - */ - .align 3 -ENTRY(omap3_sram_configure_core_dpll) - stmfd sp!, {r1-r12, lr} @ store regs to stack - - @ pull the extra args off the stack - @ and store them in SRAM - -/* - * PC-relative stores are deprecated in ARMv7 and lead to undefined behaviour - * in Thumb-2: use a r7 as a base instead. - * Be careful not to clobber r7 when maintaing this file. - */ - THUMB( adr r7, omap3_sram_configure_core_dpll ) - .macro strtext Rt:req, label:req - ARM( str \Rt, \label ) - THUMB( str \Rt, [r7, \label - omap3_sram_configure_core_dpll] ) - .endm - - ldr r4, [sp, #52] - strtext r4, omap_sdrc_rfr_ctrl_0_val - ldr r4, [sp, #56] - strtext r4, omap_sdrc_actim_ctrl_a_0_val - ldr r4, [sp, #60] - strtext r4, omap_sdrc_actim_ctrl_b_0_val - ldr r4, [sp, #64] - strtext r4, omap_sdrc_mr_0_val - ldr r4, [sp, #68] - strtext r4, omap_sdrc_rfr_ctrl_1_val - cmp r4, #0 @ if SDRC_RFR_CTRL_1 is 0, - beq skip_cs1_params @ do not use cs1 params - ldr r4, [sp, #72] - strtext r4, omap_sdrc_actim_ctrl_a_1_val - ldr r4, [sp, #76] - strtext r4, omap_sdrc_actim_ctrl_b_1_val - ldr r4, [sp, #80] - strtext r4, omap_sdrc_mr_1_val -skip_cs1_params: - mrc p15, 0, r8, c1, c0, 0 @ read ctrl register - bic r10, r8, #0x800 @ clear Z-bit, disable branch prediction - mcr p15, 0, r10, c1, c0, 0 @ write ctrl register - dsb @ flush buffered writes to interconnect - isb @ prevent speculative exec past here - cmp r3, #1 @ if increasing SDRC clk rate, - bleq configure_sdrc @ program the SDRC regs early (for RFR) - cmp r1, #SDRC_UNLOCK_DLL @ set the intended DLL state - bleq unlock_dll - blne lock_dll - bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC - bl configure_core_dpll @ change the DPLL3 M2 divider - mov r12, r2 - bl wait_clk_stable @ wait for SDRC to stabilize - bl enable_sdrc @ take SDRC out of idle - cmp r1, #SDRC_UNLOCK_DLL @ wait for DLL status to change - bleq wait_dll_unlock - blne wait_dll_lock - cmp r3, #1 @ if increasing SDRC clk rate, - beq return_to_sdram @ return to SDRAM code, otherwise, - bl configure_sdrc @ reprogram SDRC regs now -return_to_sdram: - mcr p15, 0, r8, c1, c0, 0 @ restore ctrl register - isb @ prevent speculative exec past here - mov r0, #0 @ return value - ldmfd sp!, {r1-r12, pc} @ restore regs and return -unlock_dll: - ldr r11, omap3_sdrc_dlla_ctrl - ldr r12, [r11] - bic r12, r12, #FIXEDDELAY_MASK - orr r12, r12, #FIXEDDELAY_DEFAULT - orr r12, r12, #DLLIDLE_MASK - str r12, [r11] @ (no OCP barrier needed) - bx lr -lock_dll: - ldr r11, omap3_sdrc_dlla_ctrl - ldr r12, [r11] - bic r12, r12, #DLLIDLE_MASK - str r12, [r11] @ (no OCP barrier needed) - bx lr -sdram_in_selfrefresh: - ldr r11, omap3_sdrc_power @ read the SDRC_POWER register - ldr r12, [r11] @ read the contents of SDRC_POWER - mov r9, r12 @ keep a copy of SDRC_POWER bits - orr r12, r12, #SRFRONIDLEREQ_MASK @ enable self refresh on idle - str r12, [r11] @ write back to SDRC_POWER register - ldr r12, [r11] @ posted-write barrier for SDRC -idle_sdrc: - ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg - ldr r12, [r11] - bic r12, r12, #EN_SDRC_MASK @ disable iclk bit for SDRC - str r12, [r11] -wait_sdrc_idle: - ldr r11, omap3_cm_idlest1_core - ldr r12, [r11] - and r12, r12, #ST_SDRC_MASK @ check for SDRC idle - cmp r12, #ST_SDRC_MASK - bne wait_sdrc_idle - bx lr -configure_core_dpll: - ldr r11, omap3_cm_clksel1_pll - ldr r12, [r11] - ldr r10, core_m2_mask_val @ modify m2 for core dpll - and r12, r12, r10 - orr r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT - str r12, [r11] - ldr r12, [r11] @ posted-write barrier for CM - bx lr -wait_clk_stable: - subs r12, r12, #1 - bne wait_clk_stable - bx lr -enable_sdrc: - ldr r11, omap3_cm_iclken1_core - ldr r12, [r11] - orr r12, r12, #EN_SDRC_MASK @ enable iclk bit for SDRC - str r12, [r11] -wait_sdrc_idle1: - ldr r11, omap3_cm_idlest1_core - ldr r12, [r11] - and r12, r12, #ST_SDRC_MASK - cmp r12, #0 - bne wait_sdrc_idle1 -restore_sdrc_power_val: - ldr r11, omap3_sdrc_power - str r9, [r11] @ restore SDRC_POWER, no barrier needed - bx lr -wait_dll_lock: - ldr r11, omap3_sdrc_dlla_status - ldr r12, [r11] - and r12, r12, #LOCKSTATUS_MASK - cmp r12, #LOCKSTATUS_MASK - bne wait_dll_lock - bx lr -wait_dll_unlock: - ldr r11, omap3_sdrc_dlla_status - ldr r12, [r11] - and r12, r12, #LOCKSTATUS_MASK - cmp r12, #0x0 - bne wait_dll_unlock - bx lr -configure_sdrc: - ldr r12, omap_sdrc_rfr_ctrl_0_val @ fetch value from SRAM - ldr r11, omap3_sdrc_rfr_ctrl_0 @ fetch addr from SRAM - str r12, [r11] @ store -#ifdef CONFIG_OMAP3_SDRC_AC_TIMING - ldr r12, omap_sdrc_actim_ctrl_a_0_val - ldr r11, omap3_sdrc_actim_ctrl_a_0 - str r12, [r11] - ldr r12, omap_sdrc_actim_ctrl_b_0_val - ldr r11, omap3_sdrc_actim_ctrl_b_0 - str r12, [r11] - ldr r12, omap_sdrc_mr_0_val - ldr r11, omap3_sdrc_mr_0 - str r12, [r11] -#endif - ldr r12, omap_sdrc_rfr_ctrl_1_val - cmp r12, #0 @ if SDRC_RFR_CTRL_1 is 0, - beq skip_cs1_prog @ do not program cs1 params - ldr r11, omap3_sdrc_rfr_ctrl_1 - str r12, [r11] -#ifdef CONFIG_OMAP3_SDRC_AC_TIMING - ldr r12, omap_sdrc_actim_ctrl_a_1_val - ldr r11, omap3_sdrc_actim_ctrl_a_1 - str r12, [r11] - ldr r12, omap_sdrc_actim_ctrl_b_1_val - ldr r11, omap3_sdrc_actim_ctrl_b_1 - str r12, [r11] - ldr r12, omap_sdrc_mr_1_val - ldr r11, omap3_sdrc_mr_1 - str r12, [r11] -#endif -skip_cs1_prog: - ldr r12, [r11] @ posted-write barrier for SDRC - bx lr - - .align -omap3_sdrc_power: - .word OMAP34XX_SDRC_REGADDR(SDRC_POWER) -omap3_cm_clksel1_pll: - .word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1) -omap3_cm_idlest1_core: - .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST) -omap3_cm_iclken1_core: - .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1) - -omap3_sdrc_rfr_ctrl_0: - .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0) -omap3_sdrc_rfr_ctrl_1: - .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1) -omap3_sdrc_actim_ctrl_a_0: - .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0) -omap3_sdrc_actim_ctrl_a_1: - .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1) -omap3_sdrc_actim_ctrl_b_0: - .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0) -omap3_sdrc_actim_ctrl_b_1: - .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1) -omap3_sdrc_mr_0: - .word OMAP34XX_SDRC_REGADDR(SDRC_MR_0) -omap3_sdrc_mr_1: - .word OMAP34XX_SDRC_REGADDR(SDRC_MR_1) -omap_sdrc_rfr_ctrl_0_val: - .word 0xDEADBEEF -omap_sdrc_rfr_ctrl_1_val: - .word 0xDEADBEEF -omap_sdrc_actim_ctrl_a_0_val: - .word 0xDEADBEEF -omap_sdrc_actim_ctrl_a_1_val: - .word 0xDEADBEEF -omap_sdrc_actim_ctrl_b_0_val: - .word 0xDEADBEEF -omap_sdrc_actim_ctrl_b_1_val: - .word 0xDEADBEEF -omap_sdrc_mr_0_val: - .word 0xDEADBEEF -omap_sdrc_mr_1_val: - .word 0xDEADBEEF - -omap3_sdrc_dlla_status: - .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) -omap3_sdrc_dlla_ctrl: - .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL) -core_m2_mask_val: - .word 0x07FFFFFF -ENDPROC(omap3_sram_configure_core_dpll) - -ENTRY(omap3_sram_configure_core_dpll_sz) - .word . - omap3_sram_configure_core_dpll - diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index bef41837bf7f..b18ebbefae09 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -183,7 +183,8 @@ static struct device_node * __init omap_get_timer_dt(const struct of_device_id * of_get_property(np, "ti,timer-secure", NULL))) continue; - of_add_property(np, &device_disabled); + if (!of_device_is_compatible(np, "ti,omap-counter32k")) + of_add_property(np, &device_disabled); return np; } @@ -394,7 +395,6 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void) int ret; struct device_node *np = NULL; struct omap_hwmod *oh; - void __iomem *vbase; const char *oh_name = "counter_32k"; /* @@ -420,18 +420,6 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void) omap_hwmod_setup_one(oh_name); - if (np) { - vbase = of_iomap(np, 0); - of_node_put(np); - } else { - vbase = omap_hwmod_get_mpu_rt_va(oh); - } - - if (!vbase) { - pr_warn("%s: failed to get counter_32k resource\n", __func__); - return -ENXIO; - } - ret = omap_hwmod_enable(oh); if (ret) { pr_warn("%s: failed to enable counter_32k module (%d)\n", @@ -439,13 +427,18 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void) return ret; } - ret = omap_init_clocksource_32k(vbase); - if (ret) { - pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n", - __func__, ret); - omap_hwmod_idle(oh); - } + if (!of_have_populated_dt()) { + void __iomem *vbase; + + vbase = omap_hwmod_get_mpu_rt_va(oh); + ret = omap_init_clocksource_32k(vbase); + if (ret) { + pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n", + __func__, ret); + omap_hwmod_idle(oh); + } + } return ret; } @@ -476,7 +469,64 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, clocksource_gpt.name, clksrc.rate); } -#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER +static void __init __omap_sync32k_timer_init(int clkev_nr, const char *clkev_src, + const char *clkev_prop, int clksrc_nr, const char *clksrc_src, + const char *clksrc_prop, bool gptimer) +{ + omap_clk_init(); + omap_dmtimer_init(); + omap2_gp_clockevent_init(clkev_nr, clkev_src, clkev_prop); + + /* Enable the use of clocksource="gp_timer" kernel parameter */ + if (use_gptimer_clksrc || gptimer) + omap2_gptimer_clocksource_init(clksrc_nr, clksrc_src, + clksrc_prop); + else + omap2_sync32k_clocksource_init(); +} + +void __init omap_init_time(void) +{ + __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon", + 2, "timer_sys_ck", NULL, false); + + if (of_have_populated_dt()) + clocksource_probe(); +} + +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX) +void __init omap3_secure_sync32k_timer_init(void) +{ + __omap_sync32k_timer_init(12, "secure_32k_fck", "ti,timer-secure", + 2, "timer_sys_ck", NULL, false); +} +#endif /* CONFIG_ARCH_OMAP3 */ + +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) +void __init omap3_gptimer_timer_init(void) +{ + __omap_sync32k_timer_init(2, "timer_sys_ck", NULL, + 1, "timer_sys_ck", "ti,timer-alwon", true); +} +#endif + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX) +static void __init omap4_sync32k_timer_init(void) +{ + __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon", + 2, "sys_clkin_ck", NULL, false); +} + +void __init omap4_local_timer_init(void) +{ + omap4_sync32k_timer_init(); + clocksource_probe(); +} +#endif + +#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) + /* * The realtime counter also called master counter, is a free-running * counter, which is related to real time. It produces the count used @@ -488,6 +538,7 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, */ static void __init realtime_counter_init(void) { +#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER void __iomem *base; static struct clk *sys_clk; unsigned long rate; @@ -586,78 +637,9 @@ sysclk1_based: set_cntfreq(); iounmap(base); -} -#else -static inline void __init realtime_counter_init(void) -{} #endif - -#define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ - clksrc_nr, clksrc_src, clksrc_prop) \ -void __init omap##name##_gptimer_timer_init(void) \ -{ \ - omap_clk_init(); \ - omap_dmtimer_init(); \ - omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ - omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \ - clksrc_prop); \ } -#define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ - clksrc_nr, clksrc_src, clksrc_prop) \ -void __init omap##name##_sync32k_timer_init(void) \ -{ \ - omap_clk_init(); \ - omap_dmtimer_init(); \ - omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ - /* Enable the use of clocksource="gp_timer" kernel parameter */ \ - if (use_gptimer_clksrc) \ - omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \ - clksrc_prop); \ - else \ - omap2_sync32k_clocksource_init(); \ -} - -#ifdef CONFIG_ARCH_OMAP2 -OMAP_SYS_32K_TIMER_INIT(2, 1, "timer_32k_ck", "ti,timer-alwon", - 2, "timer_sys_ck", NULL); -#endif /* CONFIG_ARCH_OMAP2 */ - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX) -OMAP_SYS_32K_TIMER_INIT(3, 1, "timer_32k_ck", "ti,timer-alwon", - 2, "timer_sys_ck", NULL); -OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure", - 2, "timer_sys_ck", NULL); -#endif /* CONFIG_ARCH_OMAP3 */ - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \ - defined(CONFIG_SOC_AM43XX) -OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL, - 1, "timer_sys_ck", "ti,timer-alwon"); -#endif - -#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ - defined(CONFIG_SOC_DRA7XX) -static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon", - 2, "sys_clkin_ck", NULL); -#endif - -#ifdef CONFIG_ARCH_OMAP4 -#ifdef CONFIG_HAVE_ARM_TWD -void __init omap4_local_timer_init(void) -{ - omap4_sync32k_timer_init(); - clocksource_probe(); -} -#else -void __init omap4_local_timer_init(void) -{ - omap4_sync32k_timer_init(); -} -#endif /* CONFIG_HAVE_ARM_TWD */ -#endif /* CONFIG_ARCH_OMAP4 */ - -#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) void __init omap5_realtime_timer_init(void) { omap4_sync32k_timer_init(); diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index d44d311704ba..2028167fff31 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -280,10 +280,6 @@ void omap3_vc_set_pmic_signaling(int core_next_state) } } -#define PRM_POLCTRL_TWL_MASK (OMAP3430_PRM_POLCTRL_CLKREQ_POL | \ - OMAP3430_PRM_POLCTRL_CLKREQ_POL) -#define PRM_POLCTRL_TWL_VAL OMAP3430_PRM_POLCTRL_CLKREQ_POL - /* * Configure signal polarity for sys_clkreq and sys_off_mode pins * as the default values are wrong and can cause the system to hang diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 08d2be2ea41f..66f1c952c048 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -45,6 +45,7 @@ config MACH_KUROBOX_PRO config MACH_DNS323 bool "D-Link DNS-323" + select GENERIC_NET_UTILS select I2C_BOARDINFO help Say 'Y' here if you want your kernel to support the @@ -52,6 +53,7 @@ config MACH_DNS323 config MACH_TS209 bool "QNAP TS-109/TS-209" + select GENERIC_NET_UTILS help Say 'Y' here if you want your kernel to support the QNAP TS-109/TS-209 platform. @@ -93,6 +95,7 @@ config MACH_LINKSTATION_LS_HGL config MACH_TS409 bool "QNAP TS-409" + select GENERIC_NET_UTILS help Say 'Y' here if you want your kernel to support the QNAP TS-409 platform. diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index f267e58a8283..bc279a853075 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -173,42 +173,10 @@ static struct mv643xx_eth_platform_data dns323_eth_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these - * functions be kept somewhere? - */ -static int __init dns323_parse_hex_nibble(char n) -{ - if (n >= '0' && n <= '9') - return n - '0'; - - if (n >= 'A' && n <= 'F') - return n - 'A' + 10; - - if (n >= 'a' && n <= 'f') - return n - 'a' + 10; - - return -1; -} - -static int __init dns323_parse_hex_byte(const char *b) -{ - int hi; - int lo; - - hi = dns323_parse_hex_nibble(b[0]); - lo = dns323_parse_hex_nibble(b[1]); - - if (hi < 0 || lo < 0) - return -1; - - return (hi << 4) | lo; -} - static int __init dns323_read_mac_addr(void) { u_int8_t addr[6]; - int i; - char *mac_page; + void __iomem *mac_page; /* MAC address is stored as a regular ol' string in /dev/mtdblock4 * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80). @@ -217,23 +185,8 @@ static int __init dns323_read_mac_addr(void) if (!mac_page) return -ENOMEM; - /* Sanity check the string we're looking at */ - for (i = 0; i < 5; i++) { - if (*(mac_page + (i * 3) + 2) != ':') { - goto error_fail; - } - } - - for (i = 0; i < 6; i++) { - int byte; - - byte = dns323_parse_hex_byte(mac_page + (i * 3)); - if (byte < 0) { - goto error_fail; - } - - addr[i] = byte; - } + if (!mac_pton((__force const char *) mac_page, addr)) + goto error_fail; iounmap(mac_page); printk("DNS-323: Found ethernet MAC address: %pM\n", addr); diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c index 24b2959719fa..d42e006597c7 100644 --- a/arch/arm/mach-orion5x/tsx09-common.c +++ b/arch/arm/mach-orion5x/tsx09-common.c @@ -53,53 +53,12 @@ struct mv643xx_eth_platform_data qnap_tsx09_eth_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static int __init qnap_tsx09_parse_hex_nibble(char n) -{ - if (n >= '0' && n <= '9') - return n - '0'; - - if (n >= 'A' && n <= 'F') - return n - 'A' + 10; - - if (n >= 'a' && n <= 'f') - return n - 'a' + 10; - - return -1; -} - -static int __init qnap_tsx09_parse_hex_byte(const char *b) -{ - int hi; - int lo; - - hi = qnap_tsx09_parse_hex_nibble(b[0]); - lo = qnap_tsx09_parse_hex_nibble(b[1]); - - if (hi < 0 || lo < 0) - return -1; - - return (hi << 4) | lo; -} - static int __init qnap_tsx09_check_mac_addr(const char *addr_str) { u_int8_t addr[6]; - int i; - for (i = 0; i < 6; i++) { - int byte; - - /* - * Enforce "xx:xx:xx:xx:xx:xx\n" format. - */ - if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n')) - return -1; - - byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3)); - if (byte < 0) - return -1; - addr[i] = byte; - } + if (!mac_pton(addr_str, addr)) + return -1; printk(KERN_INFO "tsx09: found ethernet mac address %pM\n", addr); @@ -118,12 +77,12 @@ void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size) unsigned long addr; for (addr = mem_base; addr < (mem_base + size); addr += 1024) { - char *nor_page; + void __iomem *nor_page; int ret = 0; nor_page = ioremap(addr, 1024); if (nor_page != NULL) { - ret = qnap_tsx09_check_mac_addr(nor_page); + ret = qnap_tsx09_check_mac_addr((__force const char *)nor_page); iounmap(nor_page); } diff --git a/arch/arm/mach-prima2/hotplug.c b/arch/arm/mach-prima2/hotplug.c index 0ab2f8bae28e..a728c78b996f 100644 --- a/arch/arm/mach-prima2/hotplug.c +++ b/arch/arm/mach-prima2/hotplug.c @@ -32,7 +32,7 @@ static inline void platform_do_lowpower(unsigned int cpu) * * Called with IRQs disabled */ -void __ref sirfsoc_cpu_die(unsigned int cpu) +void sirfsoc_cpu_die(unsigned int cpu) { platform_do_lowpower(cpu); } diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 5851f4c254c1..a7dae60810e8 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -26,6 +26,7 @@ #include <linux/dm9000.h> #include <linux/leds.h> #include <linux/rtc-v3020.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/i2c.h> @@ -305,11 +306,14 @@ static inline void cm_x300_init_lcd(void) {} #endif #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct pwm_lookup cm_x300_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 10000, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data cm_x300_backlight_data = { - .pwm_id = 2, .max_brightness = 100, .dft_brightness = 100, - .pwm_period_ns = 10000, .enable_gpio = -1, }; @@ -323,6 +327,7 @@ static struct platform_device cm_x300_backlight_device = { static void cm_x300_init_bl(void) { + pwm_add_table(cm_x300_pwm_lookup, ARRAY_SIZE(cm_x300_pwm_lookup)); platform_device_register(&cm_x300_backlight_device); } #else diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index 3aa264640c9d..db20d25daaab 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -20,6 +20,7 @@ #include <linux/ioport.h> #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/i2c/pxa-i2c.h> @@ -184,11 +185,14 @@ static inline void income_lcd_init(void) {} * Backlight ******************************************************************************/ #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct pwm_lookup income_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data income_backlight_data = { - .pwm_id = 0, .max_brightness = 0x3ff, .dft_brightness = 0x1ff, - .pwm_period_ns = 1000000, .enable_gpio = -1, }; @@ -202,6 +206,7 @@ static struct platform_device income_backlight = { static void __init income_pwm_init(void) { + pwm_add_table(income_pwm_lookup, ARRAY_SIZE(income_pwm_lookup)); platform_device_register(&income_backlight); } #else diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index c62473235a13..2a6e0ae2b920 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -395,6 +395,26 @@ static struct resource pxa_ir_resources[] = { .end = IRQ_ICP, .flags = IORESOURCE_IRQ, }, + [3] = { + .start = 0x40800000, + .end = 0x4080001b, + .flags = IORESOURCE_MEM, + }, + [4] = { + .start = 0x40700000, + .end = 0x40700023, + .flags = IORESOURCE_MEM, + }, + [5] = { + .start = 17, + .end = 17, + .flags = IORESOURCE_DMA, + }, + [6] = { + .start = 18, + .end = 18, + .flags = IORESOURCE_DMA, + }, }; struct platform_device pxa_device_ficp = { diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index ab93441e596e..9a9c15bfcd34 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/delay.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/input.h> #include <linux/gpio.h> @@ -49,11 +50,14 @@ #define GPIO19_GEN1_CAM_RST 19 #define GPIO28_GEN2_CAM_RST 28 +static struct pwm_lookup ezx_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78700, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data ezx_backlight_data = { - .pwm_id = 0, .max_brightness = 1023, .dft_brightness = 1023, - .pwm_period_ns = 78770, .enable_gpio = -1, }; @@ -817,6 +821,7 @@ static void __init a780_init(void) platform_device_register(&a780_camera); } + pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup)); platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); platform_add_devices(ARRAY_AND_SIZE(a780_devices)); } diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 5fb41ad6e3bc..b076a835eb21 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -557,10 +557,8 @@ static struct platform_device hx4700_lcd = { */ static struct platform_pwm_backlight_data backlight_data = { - .pwm_id = -1, /* Superseded by pwm_lookup */ .max_brightness = 200, .dft_brightness = 100, - .pwm_period_ns = 30923, .enable_gpio = -1, }; @@ -630,7 +628,6 @@ static struct spi_board_info tsc2046_board_info[] __initdata = { static struct pxa2xx_spi_master pxa_ssp2_master_info = { .num_chipselect = 1, - .clock_enable = CKEN_SSP2, .enable_dma = 1, }; diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index 9b0eb0252af6..a1869f9b6219 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -116,13 +116,11 @@ static struct spi_board_info mcp251x_board_info[] = { }; static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = { - .clock_enable = CKEN_SSP3, .num_chipselect = 2, .enable_dma = 1 }; static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = { - .clock_enable = CKEN_SSP4, .num_chipselect = 2, .enable_dma = 1 }; diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index ba6a6e1d29e9..5f6b850ebe33 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -52,9 +52,9 @@ #define GPIO101_MAGICIAN_KEY_VOL_DOWN 101 #define GPIO102_MAGICIAN_KEY_PHONE 102 #define GPIO103_MAGICIAN_LED_KP 103 -#define GPIO104_MAGICIAN_LCD_POWER_1 104 -#define GPIO105_MAGICIAN_LCD_POWER_2 105 -#define GPIO106_MAGICIAN_LCD_POWER_3 106 +#define GPIO104_MAGICIAN_LCD_VOFF_EN 104 +#define GPIO105_MAGICIAN_LCD_VON_EN 105 +#define GPIO106_MAGICIAN_LCD_DCDC_NRESET 106 #define GPIO107_MAGICIAN_DS1WM_IRQ 107 #define GPIO108_MAGICIAN_GSM_READY 108 #define GPIO114_MAGICIAN_UNKNOWN 114 @@ -78,43 +78,51 @@ * CPLD EGPIOs */ -#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO +#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO #define MAGICIAN_EGPIO(reg,bit) \ (MAGICIAN_EGPIO_BASE + 8*reg + bit) /* output */ -#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2) -#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5) -#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6) -#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7) -#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0) -#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1) -#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2) -#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3) -#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4) -#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5) -#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6) -#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7) -#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0) -#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1) -#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2) -#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) -#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) -#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5) -#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) +#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2) +#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5) +#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6) +#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7) +#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0) +#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1) +#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2) +#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3) +#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4) +#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5) +#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6) +#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7) +#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0) +#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1) +#define EGPIO_MAGICIAN_IR_RX_SHUTDOWN MAGICIAN_EGPIO(2, 2) +#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) +#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) +#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5) +#define EGPIO_MAGICIAN_NICD_CHARGE MAGICIAN_EGPIO(2, 6) +#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) /* input */ -#define EGPIO_MAGICIAN_CABLE_STATE_AC MAGICIAN_EGPIO(4, 0) -#define EGPIO_MAGICIAN_CABLE_STATE_USB MAGICIAN_EGPIO(4, 1) +/* USB or AC charger type */ +#define EGPIO_MAGICIAN_CABLE_TYPE MAGICIAN_EGPIO(4, 0) +/* + * Vbus is detected + * FIXME behaves like (6,3), may differ for host/device + */ +#define EGPIO_MAGICIAN_CABLE_VBUS MAGICIAN_EGPIO(4, 1) -#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0) -#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1) -#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2) -#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3) -#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4) +#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0) +#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1) +#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2) +#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3) +#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4) -#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1) +#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1) +/* FIXME behaves like (4,1), may differ for host/device */ +#define EGPIO_MAGICIAN_CABLE_INSERTED MAGICIAN_EGPIO(6, 3) #endif /* _MAGICIAN_H_ */ diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h index 599b925a657c..1a4291936c58 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/pxa27x.h @@ -19,7 +19,7 @@ #define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ #define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ -extern int __init pxa27x_set_pwrmode(unsigned int mode); +extern int pxa27x_set_pwrmode(unsigned int mode); extern void pxa27x_cpu_pm_enter(suspend_state_t state); #endif /* __MACH_PXA27x_H */ diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 4823d972e647..5fcd4f094900 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -23,6 +23,7 @@ #include <linux/ioport.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> @@ -271,11 +272,14 @@ static struct platform_device lpd270_flash_device[2] = { }, }; +static struct pwm_lookup lpd270_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data lpd270_backlight_data = { - .pwm_id = 0, .max_brightness = 1, .dft_brightness = 1, - .pwm_period_ns = 78770, .enable_gpio = -1, }; @@ -474,6 +478,7 @@ static void __init lpd270_init(void) */ ARB_CNTRL = ARB_CORE_PARK | 0x234; + pwm_add_table(lpd270_pwm_lookup, ARRAY_SIZE(lpd270_pwm_lookup)); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); pxa_set_ac97_info(NULL); diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index a9761c293028..896b268c3ab7 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -24,8 +24,10 @@ #include <linux/mfd/htc-pasic3.h> #include <linux/mtd/physmap.h> #include <linux/pda_power.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/regulator/driver.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/gpio-regulator.h> #include <linux/regulator/machine.h> #include <linux/usb/gpio_vbus.h> @@ -43,6 +45,12 @@ #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/usb-ohci-pxa27x.h> +#include <linux/regulator/max1586.h> + +#include <linux/platform_data/pxa2xx_udc.h> +#include <mach/udc.h> +#include <mach/pxa27x-udc.h> + #include "devices.h" #include "generic.h" @@ -52,36 +60,36 @@ static unsigned long magician_pin_config[] __initdata = { GPIO20_nSDCS_2, GPIO21_nSDCS_3, GPIO15_nCS_1, - GPIO78_nCS_2, /* PASIC3 */ - GPIO79_nCS_3, /* EGPIO CPLD */ + GPIO78_nCS_2, /* PASIC3 */ + GPIO79_nCS_3, /* EGPIO CPLD */ GPIO80_nCS_4, GPIO33_nCS_5, - /* I2C */ + /* I2C UDA1380 + OV9640 */ GPIO117_I2C_SCL, GPIO118_I2C_SDA, - /* PWM 0 */ + /* PWM 0 - LCD backlight */ GPIO16_PWM0_OUT, - /* I2S */ + /* I2S UDA1380 capture */ GPIO28_I2S_BITCLK_OUT, GPIO29_I2S_SDATA_IN, GPIO31_I2S_SYNC, GPIO113_I2S_SYSCLK, - /* SSP 1 */ + /* SSP 1 UDA1380 playback */ GPIO23_SSP1_SCLK, GPIO24_SSP1_SFRM, GPIO25_SSP1_TXD, - /* SSP 2 */ + /* SSP 2 TSC2046 touchscreen */ GPIO19_SSP2_SCLK, GPIO14_SSP2_SFRM, GPIO89_SSP2_TXD, GPIO88_SSP2_RXD, - /* MMC */ + /* MMC/SD/SDHC slot */ GPIO32_MMC_CLK, GPIO92_MMC_DAT_0, GPIO109_MMC_DAT_1, @@ -92,7 +100,7 @@ static unsigned long magician_pin_config[] __initdata = { /* LCD */ GPIOxx_LCD_TFT_16BPP, - /* QCI */ + /* QCI camera interface */ GPIO12_CIF_DD_7, GPIO17_CIF_DD_6, GPIO50_CIF_DD_3, @@ -120,12 +128,13 @@ static unsigned long magician_pin_config[] __initdata = { }; /* - * IRDA + * IrDA */ static struct pxaficp_platform_data magician_ficp_info = { .gpio_pwdown = GPIO83_MAGICIAN_nIR_EN, .transceiver_cap = IR_SIRMODE | IR_OFF, + .gpio_pwdown_inverted = 0, }; /* @@ -134,11 +143,11 @@ static struct pxaficp_platform_data magician_ficp_info = { #define INIT_KEY(_code, _gpio, _desc) \ { \ - .code = KEY_##_code, \ - .gpio = _gpio, \ - .desc = _desc, \ - .type = EV_KEY, \ - .wakeup = 1, \ + .code = KEY_##_code, \ + .gpio = _gpio, \ + .desc = _desc, \ + .type = EV_KEY, \ + .wakeup = 1, \ } static struct gpio_keys_button magician_button_table[] = { @@ -160,164 +169,162 @@ static struct gpio_keys_button magician_button_table[] = { }; static struct gpio_keys_platform_data gpio_keys_data = { - .buttons = magician_button_table, - .nbuttons = ARRAY_SIZE(magician_button_table), + .buttons = magician_button_table, + .nbuttons = ARRAY_SIZE(magician_button_table), }; static struct platform_device gpio_keys = { - .name = "gpio-keys", - .dev = { + .name = "gpio-keys", + .dev = { .platform_data = &gpio_keys_data, }, - .id = -1, + .id = -1, }; - /* * EGPIO (Xilinx CPLD) * - * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input + * 32-bit aligned 8-bit registers + * 16 possible registers (reg windows size), only 7 used: + * 3x output, 1x irq, 3x input */ static struct resource egpio_resources[] = { [0] = { - .start = PXA_CS3_PHYS, - .end = PXA_CS3_PHYS + 0x20 - 1, - .flags = IORESOURCE_MEM, + .start = PXA_CS3_PHYS, + .end = PXA_CS3_PHYS + 0x20 - 1, + .flags = IORESOURCE_MEM, }, [1] = { - .start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), - .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), - .flags = IORESOURCE_IRQ, + .start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), + .flags = IORESOURCE_IRQ, }, }; static struct htc_egpio_chip egpio_chips[] = { [0] = { - .reg_start = 0, - .gpio_base = MAGICIAN_EGPIO(0, 0), - .num_gpios = 24, - .direction = HTC_EGPIO_OUTPUT, - .initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */ + .reg_start = 0, + .gpio_base = MAGICIAN_EGPIO(0, 0), + .num_gpios = 24, + .direction = HTC_EGPIO_OUTPUT, + /* + * Depends on modules configuration + */ + .initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */ }, [1] = { - .reg_start = 4, - .gpio_base = MAGICIAN_EGPIO(4, 0), - .num_gpios = 24, - .direction = HTC_EGPIO_INPUT, + .reg_start = 4, + .gpio_base = MAGICIAN_EGPIO(4, 0), + .num_gpios = 24, + .direction = HTC_EGPIO_INPUT, }, }; static struct htc_egpio_platform_data egpio_info = { - .reg_width = 8, - .bus_width = 32, - .irq_base = IRQ_BOARD_START, - .num_irqs = 4, - .ack_register = 3, - .chip = egpio_chips, - .num_chips = ARRAY_SIZE(egpio_chips), + .reg_width = 8, + .bus_width = 32, + .irq_base = IRQ_BOARD_START, + .num_irqs = 4, + .ack_register = 3, + .chip = egpio_chips, + .num_chips = ARRAY_SIZE(egpio_chips), }; static struct platform_device egpio = { - .name = "htc-egpio", - .id = -1, - .resource = egpio_resources, - .num_resources = ARRAY_SIZE(egpio_resources), + .name = "htc-egpio", + .id = -1, + .resource = egpio_resources, + .num_resources = ARRAY_SIZE(egpio_resources), .dev = { .platform_data = &egpio_info, }, }; /* - * LCD - Toppoly TD028STEB1 or Samsung LTP280QV + * PXAFB LCD - Toppoly TD028STEB1 or Samsung LTP280QV */ static struct pxafb_mode_info toppoly_modes[] = { { - .pixclock = 96153, - .bpp = 16, - .xres = 240, - .yres = 320, - .hsync_len = 11, - .vsync_len = 3, - .left_margin = 19, - .upper_margin = 2, - .right_margin = 10, - .lower_margin = 2, - .sync = 0, + .pixclock = 96153, + .bpp = 16, + .xres = 240, + .yres = 320, + .hsync_len = 11, + .vsync_len = 3, + .left_margin = 19, + .upper_margin = 2, + .right_margin = 10, + .lower_margin = 2, + .sync = 0, }, }; static struct pxafb_mode_info samsung_modes[] = { { - .pixclock = 96153, - .bpp = 16, - .xres = 240, - .yres = 320, - .hsync_len = 8, - .vsync_len = 4, - .left_margin = 9, - .upper_margin = 4, - .right_margin = 9, - .lower_margin = 4, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .pixclock = 226469, + .bpp = 16, + .xres = 240, + .yres = 320, + .hsync_len = 8, + .vsync_len = 4, + .left_margin = 9, + .upper_margin = 4, + .right_margin = 9, + .lower_margin = 4, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, }, }; static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si) { - pr_debug("Toppoly LCD power\n"); + pr_debug("Toppoly LCD power: %s\n", on ? "on" : "off"); if (on) { - pr_debug("on\n"); gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1); udelay(2000); gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1); udelay(2000); /* FIXME: enable LCDC here */ udelay(2000); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1); + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1); udelay(2000); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1); + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1); } else { - pr_debug("off\n"); msleep(15); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0); + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0); udelay(500); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0); + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0); udelay(1000); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0); gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0); } } static void samsung_lcd_power(int on, struct fb_var_screeninfo *si) { - pr_debug("Samsung LCD power\n"); + pr_debug("Samsung LCD power: %s\n", on ? "on" : "off"); if (on) { - pr_debug("on\n"); if (system_rev < 3) gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1); else gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1); - mdelay(10); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1); - mdelay(10); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1); - mdelay(30); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1); - mdelay(10); + mdelay(6); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1); + mdelay(6); /* Avdd -> Voff >5ms */ + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1); + mdelay(16); /* Voff -> Von >(5+10)ms */ + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1); } else { - pr_debug("off\n"); - mdelay(10); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0); - mdelay(30); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0); - mdelay(10); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0); - mdelay(10); + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0); + mdelay(16); + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0); + mdelay(6); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0); + mdelay(6); if (system_rev < 3) gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0); else @@ -326,29 +333,43 @@ static void samsung_lcd_power(int on, struct fb_var_screeninfo *si) } static struct pxafb_mach_info toppoly_info = { - .modes = toppoly_modes, - .num_modes = 1, - .fixed_modes = 1, - .lcd_conn = LCD_COLOR_TFT_16BPP, - .pxafb_lcd_power = toppoly_lcd_power, + .modes = toppoly_modes, + .num_modes = 1, + .fixed_modes = 1, + .lcd_conn = LCD_COLOR_TFT_16BPP, + .pxafb_lcd_power = toppoly_lcd_power, }; static struct pxafb_mach_info samsung_info = { - .modes = samsung_modes, - .num_modes = 1, - .fixed_modes = 1, - .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |\ - LCD_ALTERNATE_MAPPING, - .pxafb_lcd_power = samsung_lcd_power, + .modes = samsung_modes, + .num_modes = 1, + .fixed_modes = 1, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL | + LCD_ALTERNATE_MAPPING, + .pxafb_lcd_power = samsung_lcd_power, }; /* * Backlight */ +static struct pwm_lookup magician_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 30923, + PWM_POLARITY_NORMAL), +}; + + /* + * fixed regulator for pwm_backlight + */ + +static struct regulator_consumer_supply pwm_backlight_supply[] = { + REGULATOR_SUPPLY("power", "pwm_backlight"), +}; + + static struct gpio magician_bl_gpios[] = { - { EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" }, - { EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" }, + { EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" }, + { EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" }, }; static int magician_backlight_init(struct device *dev) @@ -358,6 +379,7 @@ static int magician_backlight_init(struct device *dev) static int magician_backlight_notify(struct device *dev, int brightness) { + pr_debug("Brightness = %i\n", brightness); gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness); if (brightness >= 200) { gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1); @@ -373,28 +395,33 @@ static void magician_backlight_exit(struct device *dev) gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios)); } +/* + * LCD PWM backlight (main) + * + * MP1521 frequency should be: + * 100-400 Hz = 2 .5*10^6 - 10 *10^6 ns + */ + static struct platform_pwm_backlight_data backlight_data = { - .pwm_id = 0, - .max_brightness = 272, - .dft_brightness = 100, - .pwm_period_ns = 30923, - .enable_gpio = -1, - .init = magician_backlight_init, - .notify = magician_backlight_notify, - .exit = magician_backlight_exit, + .max_brightness = 272, + .dft_brightness = 100, + .enable_gpio = -1, + .init = magician_backlight_init, + .notify = magician_backlight_notify, + .exit = magician_backlight_exit, }; static struct platform_device backlight = { - .name = "pwm-backlight", - .id = -1, - .dev = { - .parent = &pxa27x_device_pwm0.dev, - .platform_data = &backlight_data, + .name = "pwm-backlight", + .id = -1, + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &backlight_data, }, }; /* - * LEDs + * GPIO LEDs, Phone keys backlight, vibra */ static struct gpio_led gpio_leds[] = { @@ -416,69 +443,32 @@ static struct gpio_led_platform_data gpio_led_info = { }; static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { + .name = "leds-gpio", + .id = -1, + .dev = { .platform_data = &gpio_led_info, }, }; -static struct pasic3_led pasic3_leds[] = { - { - .led = { - .name = "magician:red", - .default_trigger = "ds2760-battery.0-charging", - }, - .hw_num = 0, - .bit2 = PASIC3_BIT2_LED0, - .mask = PASIC3_MASK_LED0, - }, - { - .led = { - .name = "magician:green", - .default_trigger = "ds2760-battery.0-charging-or-full", - }, - .hw_num = 1, - .bit2 = PASIC3_BIT2_LED1, - .mask = PASIC3_MASK_LED1, - }, - { - .led = { - .name = "magician:blue", - .default_trigger = "bluetooth", - }, - .hw_num = 2, - .bit2 = PASIC3_BIT2_LED2, - .mask = PASIC3_MASK_LED2, - }, -}; - -static struct pasic3_leds_machinfo pasic3_leds_info = { - .num_leds = ARRAY_SIZE(pasic3_leds), - .power_gpio = EGPIO_MAGICIAN_LED_POWER, - .leds = pasic3_leds, -}; - /* * PASIC3 with DS1WM */ static struct resource pasic3_resources[] = { [0] = { - .start = PXA_CS2_PHYS, + .start = PXA_CS2_PHYS, .end = PXA_CS2_PHYS + 0x1b, - .flags = IORESOURCE_MEM, + .flags = IORESOURCE_MEM, }, /* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */ [1] = { - .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), - .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; static struct pasic3_platform_data pasic3_platform_data = { - .led_pdata = &pasic3_leds_info, .clock_rate = 4000000, }; @@ -493,25 +483,42 @@ static struct platform_device pasic3 = { }; /* - * USB "Transceiver" + * PXA UDC + */ + +static void magician_udc_command(int cmd) +{ + if (cmd == PXA2XX_UDC_CMD_CONNECT) + UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE; + else if (cmd == PXA2XX_UDC_CMD_DISCONNECT) + UP2OCR &= ~(UP2OCR_DPPUE | UP2OCR_DPPUBE); +} + +static struct pxa2xx_udc_mach_info magician_udc_info __initdata = { + .udc_command = magician_udc_command, + .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN, +}; + +/* + * USB device VBus detection */ static struct resource gpio_vbus_resource = { - .flags = IORESOURCE_IRQ, - .start = IRQ_MAGICIAN_VBUS, - .end = IRQ_MAGICIAN_VBUS, + .flags = IORESOURCE_IRQ, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, }; static struct gpio_vbus_mach_info gpio_vbus_info = { - .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN, - .gpio_vbus = EGPIO_MAGICIAN_CABLE_STATE_USB, + .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN, + .gpio_vbus = EGPIO_MAGICIAN_CABLE_VBUS, }; static struct platform_device gpio_vbus = { - .name = "gpio-vbus", - .id = -1, - .num_resources = 1, - .resource = &gpio_vbus_resource, + .name = "gpio-vbus", + .id = -1, + .num_resources = 1, + .resource = &gpio_vbus_resource, .dev = { .platform_data = &gpio_vbus_info, }, @@ -521,19 +528,60 @@ static struct platform_device gpio_vbus = { * External power */ -static int power_supply_init(struct device *dev) +static int magician_supply_init(struct device *dev) +{ + int ret = -1; + + ret = gpio_request(EGPIO_MAGICIAN_CABLE_TYPE, "Cable is AC charger"); + if (ret) { + pr_err("Cannot request AC/USB charger GPIO (%i)\n", ret); + goto err_ac; + } + + ret = gpio_request(EGPIO_MAGICIAN_CABLE_INSERTED, "Cable inserted"); + if (ret) { + pr_err("Cannot request cable detection GPIO (%i)\n", ret); + goto err_usb; + } + + return 0; + +err_usb: + gpio_free(EGPIO_MAGICIAN_CABLE_TYPE); +err_ac: + return ret; +} + +static void magician_set_charge(int flags) { - return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC"); + if (flags & PDA_POWER_CHARGE_AC) { + pr_debug("Charging from AC\n"); + gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1); + } else if (flags & PDA_POWER_CHARGE_USB) { + pr_debug("Charging from USB\n"); + gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1); + } else { + pr_debug("Charging disabled\n"); + gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 0); + } } static int magician_is_ac_online(void) { - return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC); + return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) && + gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE); /* AC=1 */ } -static void power_supply_exit(struct device *dev) +static int magician_is_usb_online(void) { - gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC); + return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) && + (!gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE)); /* USB=0 */ +} + +static void magician_supply_exit(struct device *dev) +{ + gpio_free(EGPIO_MAGICIAN_CABLE_INSERTED); + gpio_free(EGPIO_MAGICIAN_CABLE_TYPE); } static char *magician_supplicants[] = { @@ -541,38 +589,40 @@ static char *magician_supplicants[] = { }; static struct pda_power_pdata power_supply_info = { - .init = power_supply_init, - .is_ac_online = magician_is_ac_online, - .exit = power_supply_exit, - .supplied_to = magician_supplicants, - .num_supplicants = ARRAY_SIZE(magician_supplicants), + .init = magician_supply_init, + .exit = magician_supply_exit, + .is_ac_online = magician_is_ac_online, + .is_usb_online = magician_is_usb_online, + .set_charge = magician_set_charge, + .supplied_to = magician_supplicants, + .num_supplicants = ARRAY_SIZE(magician_supplicants), }; static struct resource power_supply_resources[] = { [0] = { - .name = "ac", - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | - IORESOURCE_IRQ_LOWEDGE, - .start = IRQ_MAGICIAN_VBUS, - .end = IRQ_MAGICIAN_VBUS, + .name = "ac", + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, }, [1] = { - .name = "usb", - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | - IORESOURCE_IRQ_LOWEDGE, - .start = IRQ_MAGICIAN_VBUS, - .end = IRQ_MAGICIAN_VBUS, + .name = "usb", + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, }, }; static struct platform_device power_supply = { - .name = "pda-power", - .id = -1, - .dev = { + .name = "pda-power", + .id = -1, + .dev = { .platform_data = &power_supply_info, }, - .resource = power_supply_resources, - .num_resources = ARRAY_SIZE(power_supply_resources), + .resource = power_supply_resources, + .num_resources = ARRAY_SIZE(power_supply_resources), }; /* @@ -586,11 +636,12 @@ static struct regulator_consumer_supply bq24022_consumers[] = { static struct regulator_init_data bq24022_init_data = { .constraints = { - .max_uA = 500000, - .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS, + .max_uA = 500000, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT | + REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), - .consumer_supplies = bq24022_consumers, + .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), + .consumer_supplies = bq24022_consumers, }; static struct gpio bq24022_gpios[] = { @@ -603,39 +654,85 @@ static struct gpio_regulator_state bq24022_states[] = { }; static struct gpio_regulator_config bq24022_info = { - .supply_name = "bq24022", + .supply_name = "bq24022", - .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, - .enable_high = 0, - .enabled_at_boot = 0, + .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, + .enable_high = 0, + .enabled_at_boot = 1, - .gpios = bq24022_gpios, - .nr_gpios = ARRAY_SIZE(bq24022_gpios), + .gpios = bq24022_gpios, + .nr_gpios = ARRAY_SIZE(bq24022_gpios), - .states = bq24022_states, - .nr_states = ARRAY_SIZE(bq24022_states), + .states = bq24022_states, + .nr_states = ARRAY_SIZE(bq24022_states), - .type = REGULATOR_CURRENT, - .init_data = &bq24022_init_data, + .type = REGULATOR_CURRENT, + .init_data = &bq24022_init_data, }; static struct platform_device bq24022 = { - .name = "gpio-regulator", - .id = -1, - .dev = { + .name = "gpio-regulator", + .id = -1, + .dev = { .platform_data = &bq24022_info, }, }; /* + * Vcore regulator MAX1587A + */ + +static struct regulator_consumer_supply magician_max1587a_consumers[] = { + REGULATOR_SUPPLY("vcc_core", NULL), +}; + +static struct regulator_init_data magician_max1587a_v3_info = { + .constraints = { + .name = "vcc_core range", + .min_uV = 700000, + .max_uV = 1475000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .consumer_supplies = magician_max1587a_consumers, + .num_consumer_supplies = ARRAY_SIZE(magician_max1587a_consumers), +}; + +static struct max1586_subdev_data magician_max1587a_subdevs[] = { + { + .name = "vcc_core", + .id = MAX1586_V3, + .platform_data = &magician_max1587a_v3_info, + } +}; + +static struct max1586_platform_data magician_max1587a_info = { + .subdevs = magician_max1587a_subdevs, + .num_subdevs = ARRAY_SIZE(magician_max1587a_subdevs), + /* + * NOTICE measured directly on the PCB (board_id == 0x3a), but + * if R24 is present, it will boost the voltage + * (write 1.475V, get 1.645V and smoke) + */ + .v3_gain = MAX1586_GAIN_NO_R24, +}; + +static struct i2c_board_info magician_pwr_i2c_board_info[] __initdata = { + { + I2C_BOARD_INFO("max1586", 0x14), + .platform_data = &magician_max1587a_info, + }, +}; + +/* * MMC/SD */ static int magician_mci_init(struct device *dev, - irq_handler_t detect_irq, void *data) + irq_handler_t detect_irq, void *data) { return request_irq(IRQ_MAGICIAN_SD, detect_irq, 0, - "mmc card detect", data); + "mmc card detect", data); } static void magician_mci_exit(struct device *dev, void *data) @@ -644,9 +741,9 @@ static void magician_mci_exit(struct device *dev, void *data) } static struct pxamci_platform_data magician_mci_info = { - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = magician_mci_init, - .exit = magician_mci_exit, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = magician_mci_init, + .exit = magician_mci_exit, .gpio_card_detect = -1, .gpio_card_ro = EGPIO_MAGICIAN_nSD_READONLY, .gpio_card_ro_invert = 1, @@ -660,47 +757,102 @@ static struct pxamci_platform_data magician_mci_info = { static struct pxaohci_platform_data magician_ohci_info = { .port_mode = PMM_PERPORT_MODE, - .flags = ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW, + /* port1: CSR Bluetooth, port2: OTG with UDC */ + .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW, .power_budget = 0, + .power_on_delay = 100, }; - /* * StrataFlash */ +static int magician_flash_init(struct platform_device *pdev) +{ + int ret = gpio_request(EGPIO_MAGICIAN_FLASH_VPP, "flash Vpp enable"); + + if (ret) { + pr_err("Cannot request flash enable GPIO (%i)\n", ret); + return ret; + } + + ret = gpio_direction_output(EGPIO_MAGICIAN_FLASH_VPP, 1); + if (ret) { + pr_err("Cannot set direction for flash enable (%i)\n", ret); + gpio_free(EGPIO_MAGICIAN_FLASH_VPP); + } + + return ret; +} + static void magician_set_vpp(struct platform_device *pdev, int vpp) { gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp); } +static void magician_flash_exit(struct platform_device *pdev) +{ + gpio_free(EGPIO_MAGICIAN_FLASH_VPP); +} + static struct resource strataflash_resource = { - .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + SZ_64M - 1, - .flags = IORESOURCE_MEM, + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, }; +static struct mtd_partition magician_flash_parts[] = { + { + .name = "Bootloader", + .offset = 0x0, + .size = 0x40000, + .mask_flags = MTD_WRITEABLE, /* EXPERIMENTAL */ + }, + { + .name = "Linux Kernel", + .offset = 0x40000, + .size = MTDPART_SIZ_FULL, + }, +}; + +/* + * physmap-flash driver + */ + static struct physmap_flash_data strataflash_data = { - .width = 4, - .set_vpp = magician_set_vpp, + .width = 4, + .init = magician_flash_init, + .set_vpp = magician_set_vpp, + .exit = magician_flash_exit, + .parts = magician_flash_parts, + .nr_parts = ARRAY_SIZE(magician_flash_parts), }; static struct platform_device strataflash = { - .name = "physmap-flash", - .id = -1, - .resource = &strataflash_resource, - .num_resources = 1, + .name = "physmap-flash", + .id = -1, + .resource = &strataflash_resource, + .num_resources = 1, .dev = { .platform_data = &strataflash_data, }, }; /* - * I2C + * PXA I2C main controller */ static struct i2c_pxa_platform_data i2c_info = { - .fast_mode = 1, + /* OV9640 I2C device doesn't support fast mode */ + .fast_mode = 0, +}; + +/* + * PXA I2C power controller + */ + +static struct i2c_pxa_platform_data magician_i2c_power_info = { + .fast_mode = 1, }; /* @@ -720,12 +872,13 @@ static struct platform_device *devices[] __initdata = { }; static struct gpio magician_global_gpios[] = { - { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" }, + { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" }, { GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" }, - { GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" }, - { GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" }, - { GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" }, - { GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" }, + + /* NOTICE valid LCD init sequence */ + { GPIO106_MAGICIAN_LCD_DCDC_NRESET, GPIOF_OUT_INIT_LOW, "LCD DCDC nreset" }, + { GPIO104_MAGICIAN_LCD_VOFF_EN, GPIOF_OUT_INIT_LOW, "LCD VOFF enable" }, + { GPIO105_MAGICIAN_LCD_VON_EN, GPIOF_OUT_INIT_LOW, "LCD VON enable" }, }; static void __init magician_init(void) @@ -737,44 +890,55 @@ static void __init magician_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config)); err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios)); if (err) - pr_err("magician: Failed to request GPIOs: %d\n", err); + pr_err("magician: Failed to request global GPIOs: %d\n", err); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - platform_add_devices(ARRAY_AND_SIZE(devices)); + pwm_add_table(magician_pwm_lookup, ARRAY_SIZE(magician_pwm_lookup)); pxa_set_ficp_info(&magician_ficp_info); - pxa27x_set_i2c_power_info(NULL); + pxa27x_set_i2c_power_info(&magician_i2c_power_info); pxa_set_i2c_info(&i2c_info); + + i2c_register_board_info(1, + ARRAY_AND_SIZE(magician_pwr_i2c_board_info)); + pxa_set_mci_info(&magician_mci_info); pxa_set_ohci_info(&magician_ohci_info); + pxa_set_udc_info(&magician_udc_info); /* Check LCD type we have */ cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000); if (cpld) { - u8 board_id = __raw_readb(cpld+0x14); + u8 board_id = __raw_readb(cpld + 0x14); + iounmap(cpld); system_rev = board_id & 0x7; lcd_select = board_id & 0x8; pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly"); if (lcd_select && (system_rev < 3)) + /* NOTICE valid LCD init sequence */ gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER, - GPIOF_OUT_INIT_LOW, "SAMSUNG_POWER"); - pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info); + GPIOF_OUT_INIT_LOW, "Samsung LCD Power"); + pxa_set_fb_info(NULL, + lcd_select ? &samsung_info : &toppoly_info); } else pr_err("LCD detection: CPLD mapping failed\n"); -} + regulator_register_always_on(0, "power", pwm_backlight_supply, + ARRAY_SIZE(pwm_backlight_supply), 5000000); + + platform_add_devices(ARRAY_AND_SIZE(devices)); +} MACHINE_START(MAGICIAN, "HTC Magician") - .atag_offset = 0x100, - .map_io = pxa27x_map_io, - .nr_irqs = MAGICIAN_NR_IRQS, - .init_irq = pxa27x_init_irq, - .handle_irq = pxa27x_handle_irq, - .init_machine = magician_init, + .atag_offset = 0x100, + .map_io = pxa27x_map_io, + .nr_irqs = MAGICIAN_NR_IRQS, + .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, + .init_machine = magician_init, .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 2c0658cf6be2..c3a87c176d72 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -26,6 +26,7 @@ #include <linux/mtd/partitions.h> #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> #include <linux/i2c/pxa-i2c.h> @@ -248,11 +249,14 @@ static struct platform_device mst_flash_device[2] = { }; #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pwm_lookup mainstone_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data mainstone_backlight_data = { - .pwm_id = 0, .max_brightness = 1023, .dft_brightness = 1023, - .pwm_period_ns = 78770, .enable_gpio = -1, }; @@ -266,9 +270,16 @@ static struct platform_device mainstone_backlight_device = { static void __init mainstone_backlight_register(void) { - int ret = platform_device_register(&mainstone_backlight_device); - if (ret) + int ret; + + pwm_add_table(mainstone_pwm_lookup, ARRAY_SIZE(mainstone_pwm_lookup)); + + ret = platform_device_register(&mainstone_backlight_device); + if (ret) { printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret); + pwm_remove_table(mainstone_pwm_lookup, + ARRAY_SIZE(mainstone_pwm_lookup)); + } } #else #define mainstone_backlight_register() do { } while (0) diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 29997bde277d..3b52b1aa0659 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -26,6 +26,7 @@ #include <linux/input.h> #include <linux/delay.h> #include <linux/gpio_keys.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/rtc.h> #include <linux/leds.h> @@ -181,12 +182,15 @@ static unsigned long mioa701_pin_config[] = { MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH), }; +static struct pwm_lookup mioa701_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 4000 * 1024, + PWM_POLARITY_NORMAL), +}; + /* LCD Screen and Backlight */ static struct platform_pwm_backlight_data mioa701_backlight_data = { - .pwm_id = 0, .max_brightness = 100, .dft_brightness = 50, - .pwm_period_ns = 4000 * 1024, /* Fl = 250kHz */ .enable_gpio = -1, }; @@ -678,6 +682,7 @@ MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info) MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL) MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL) MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL) +MIO_SIMPLE_DEV(wm9713_acodec, "wm9713-codec", NULL); MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data); MIO_SIMPLE_DEV(mioa701_camera, "soc-camera-pdrv",&iclink); @@ -685,6 +690,7 @@ static struct platform_device *devices[] __initdata = { &mioa701_gpio_keys, &mioa701_backlight, &mioa701_led, + &wm9713_acodec, &pxa2xx_pcm, &mioa701_sound, &power_dev, @@ -751,6 +757,7 @@ static void __init mioa701_machine_init(void) pxa_set_udc_info(&mioa701_udc_info); pxa_set_ac97_info(&mioa701_ac97_info); pm_power_off = mioa701_poweroff; + pwm_add_table(mioa701_pwm_lookup, ARRAY_SIZE(mioa701_pwm_lookup)); platform_add_devices(devices, ARRAY_SIZE(devices)); gsm_init(); diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index e54a296fb81f..13eba2b26e0a 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -15,6 +15,7 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/pda_power.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> #include <linux/wm97xx.h> @@ -270,6 +271,11 @@ void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset) * Backlight ******************************************************************************/ #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct pwm_lookup palm27x_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 3500 * 1024, + PWM_POLARITY_NORMAL), +}; + static int palm_bl_power; static int palm_lcd_power; @@ -318,10 +324,8 @@ static void palm27x_backlight_exit(struct device *dev) } static struct platform_pwm_backlight_data palm27x_backlight_data = { - .pwm_id = 0, .max_brightness = 0xfe, .dft_brightness = 0x7e, - .pwm_period_ns = 3500 * 1024, .enable_gpio = -1, .init = palm27x_backlight_init, .notify = palm27x_backlight_notify, @@ -340,6 +344,7 @@ void __init palm27x_pwm_init(int bl, int lcd) { palm_bl_power = bl; palm_lcd_power = lcd; + pwm_add_lookup(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup)); platform_device_register(&palm27x_backlight); } #endif diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 7691c974ca4b..aebf6de62468 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -18,6 +18,7 @@ #include <linux/delay.h> #include <linux/irq.h> #include <linux/input.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> #include <linux/input/matrix_keypad.h> @@ -166,11 +167,14 @@ static inline void palmtc_keys_init(void) {} * Backlight ******************************************************************************/ #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct pwm_lookup palmtc_pwm_lookup[] = { + PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS, + PWM_PERIOD_NORMAL), +}; + static struct platform_pwm_backlight_data palmtc_backlight_data = { - .pwm_id = 1, .max_brightness = PALMTC_MAX_INTENSITY, .dft_brightness = PALMTC_MAX_INTENSITY, - .pwm_period_ns = PALMTC_PERIOD_NS, .enable_gpio = GPIO_NR_PALMTC_BL_POWER, }; @@ -184,6 +188,7 @@ static struct platform_device palmtc_backlight = { static void __init palmtc_pwm_init(void) { + pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup)); platform_device_register(&palmtc_backlight); } #else diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 956fd24ee6fd..e64bb4326e69 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -21,6 +21,7 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/pda_power.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> #include <linux/wm97xx.h> @@ -138,6 +139,11 @@ static struct platform_device palmte2_pxa_keys = { /****************************************************************************** * Backlight ******************************************************************************/ +static struct pwm_lookup palmte2_pwm_lookup[] = { + PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL, + PALMTE2_PERIOD_NS, PWM_POLARITY_NORMAL), +}; + static struct gpio palmte_bl_gpios[] = { { GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" }, { GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" }, @@ -161,10 +167,8 @@ static void palmte2_backlight_exit(struct device *dev) } static struct platform_pwm_backlight_data palmte2_backlight_data = { - .pwm_id = 0, .max_brightness = PALMTE2_MAX_INTENSITY, .dft_brightness = PALMTE2_MAX_INTENSITY, - .pwm_period_ns = PALMTE2_PERIOD_NS, .enable_gpio = -1, .init = palmte2_backlight_init, .notify = palmte2_backlight_notify, @@ -355,6 +359,7 @@ static void __init palmte2_init(void) pxa_set_ac97_info(&palmte2_ac97_pdata); pxa_set_ficp_info(&palmte2_ficp_platform_data); + pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup)); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index d8319b54299a..b71c96f614f9 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -24,6 +24,7 @@ #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <media/mt9v022.h> @@ -148,11 +149,14 @@ static struct pxafb_mach_info pcm990_fbinfo __initdata = { }; #endif +static struct pwm_lookup pcm990_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data pcm990_backlight_data = { - .pwm_id = 0, .max_brightness = 1023, .dft_brightness = 1023, - .pwm_period_ns = 78770, .enable_gpio = -1, }; @@ -542,6 +546,7 @@ void __init pcm990_baseboard_init(void) #ifndef CONFIG_PCM990_DISPLAY_NONE pxa_set_fb_info(NULL, &pcm990_fbinfo); #endif + pwm_add_table(pcm990_pwm_lookup, ARRAY_SIZE(pcm990_pwm_lookup)); platform_device_register(&pcm990_backlight_device); /* MMC */ diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 221260d5d109..ffc424028557 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -84,7 +84,7 @@ EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset); */ static unsigned int pwrmode = PWRMODE_SLEEP; -int __init pxa27x_set_pwrmode(unsigned int mode) +int pxa27x_set_pwrmode(unsigned int mode) { switch (mode) { case PWRMODE_SLEEP: diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 88f70c37ad0d..36571a9a44fe 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -29,6 +29,7 @@ #include <linux/leds.h> #include <linux/w1-gpio.h> #include <linux/sched.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> @@ -507,7 +508,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = { .ext_pullup_enable_pin = -EINVAL, }; -struct platform_device raumfeld_w1_gpio_device = { +static struct platform_device raumfeld_w1_gpio_device = { .name = "w1-gpio", .dev = { .platform_data = &w1_gpio_platform_data @@ -531,13 +532,15 @@ static void __init raumfeld_w1_init(void) * Framebuffer device */ +static struct pwm_lookup raumfeld_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 10000, + PWM_POLARITY_NORMAL), +}; + /* PWM controlled backlight */ static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = { - .pwm_id = 0, .max_brightness = 100, .dft_brightness = 100, - /* 10000 ns = 10 ms ^= 100 kHz */ - .pwm_period_ns = 10000, .enable_gpio = -1, }; @@ -618,6 +621,8 @@ static void __init raumfeld_lcd_init(void) } else { mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); + pwm_add_table(raumfeld_pwm_lookup, + ARRAY_SIZE(raumfeld_pwm_lookup)); platform_device_register(&raumfeld_pwm_backlight_device); } @@ -629,7 +634,7 @@ static void __init raumfeld_lcd_init(void) * SPI devices */ -struct spi_gpio_platform_data raumfeld_spi_platform_data = { +static struct spi_gpio_platform_data raumfeld_spi_platform_data = { .sck = GPIO_SPI_CLK, .mosi = GPIO_SPI_MOSI, .miso = GPIO_SPI_MISO, @@ -848,7 +853,7 @@ static void __init raumfeld_power_init(void) static struct regulator_consumer_supply audio_va_consumer_supply = REGULATOR_SUPPLY("va", "0-0048"); -struct regulator_init_data audio_va_initdata = { +static struct regulator_init_data audio_va_initdata = { .consumer_supplies = &audio_va_consumer_supply, .num_consumer_supplies = 1, .constraints = { @@ -880,7 +885,7 @@ static struct regulator_consumer_supply audio_dummy_supplies[] = { REGULATOR_SUPPLY("vlc", "0-0048"), }; -struct regulator_init_data audio_dummy_initdata = { +static struct regulator_init_data audio_dummy_initdata = { .consumer_supplies = audio_dummy_supplies, .num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies), .constraints = { @@ -928,7 +933,7 @@ static struct regulator_init_data vcc_mmc_init_data = { .num_consumer_supplies = 1, }; -struct max8660_subdev_data max8660_v6_subdev_data = { +static struct max8660_subdev_data max8660_v6_subdev_data = { .id = MAX8660_V6, .name = "vmmc", .platform_data = &vcc_mmc_init_data, diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index a71da84e784b..349a13a76215 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -18,6 +18,7 @@ #include <linux/clk.h> #include <linux/gpio.h> #include <linux/smc91x.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <asm/mach-types.h> @@ -168,21 +169,24 @@ static inline void tavorevb_init_keypad(void) {} #endif /* CONFIG_KEYBOARD_PXA27x || CONFIG_KEYBOARD_PXA27x_MODULE */ #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pwm_lookup tavorevb_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 100000, + PWM_POLARITY_NORMAL), + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.1", NULL, 100000, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data tavorevb_backlight_data[] = { [0] = { /* primary backlight */ - .pwm_id = 2, .max_brightness = 100, .dft_brightness = 100, - .pwm_period_ns = 100000, .enable_gpio = -1, }, [1] = { /* secondary backlight */ - .pwm_id = 0, .max_brightness = 100, .dft_brightness = 100, - .pwm_period_ns = 100000, .enable_gpio = -1, }, }; @@ -470,6 +474,7 @@ static struct pxafb_mach_info tavorevb_lcd_info = { static void __init tavorevb_init_lcd(void) { + pwm_add_table(tavorevb_pwm_lookup, ARRAY_SIZE(tavorevb_pwm_lookup)); platform_device_register(&tavorevb_backlight_devices[0]); platform_device_register(&tavorevb_backlight_devices[1]); pxa_set_fb_info(NULL, &tavorevb_lcd_info); diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 8ab26370107e..7ecc61ad2bed 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -39,6 +39,7 @@ #include <linux/i2c/pxa-i2c.h> #include <linux/serial_8250.h> #include <linux/smc91x.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/usb/isp116x.h> #include <linux/mtd/mtd.h> @@ -350,6 +351,11 @@ static struct pxafb_mach_info fb_info = { .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, }; +static struct pwm_lookup viper_pwm_lookup[] = { + PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000, + PWM_POLARITY_NORMAL), +}; + static int viper_backlight_init(struct device *dev) { int ret; @@ -398,10 +404,8 @@ static void viper_backlight_exit(struct device *dev) } static struct platform_pwm_backlight_data viper_backlight_data = { - .pwm_id = 0, .max_brightness = 100, .dft_brightness = 100, - .pwm_period_ns = 1000000, .enable_gpio = -1, .init = viper_backlight_init, .notify = viper_backlight_notify, @@ -939,6 +943,7 @@ static void __init viper_init(void) smc91x_device.num_resources--; pxa_set_i2c_info(NULL); + pwm_add_table(viper_pwm_lookup, ARRAY_SIZE(viper_pwm_lookup)); platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs)); viper_init_vcore_gpios(); diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index e1a121b36cfa..d9899d73e46b 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/z2_battery.h> #include <linux/dma-mapping.h> @@ -199,21 +200,24 @@ static inline void z2_nor_init(void) {} * Backlight ******************************************************************************/ #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct pwm_lookup z2_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight.0", NULL, 1260320, + PWM_POLARITY_NORMAL), + PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.1", NULL, 1260320, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data z2_backlight_data[] = { [0] = { /* Keypad Backlight */ - .pwm_id = 1, .max_brightness = 1023, .dft_brightness = 0, - .pwm_period_ns = 1260320, .enable_gpio = -1, }, [1] = { /* LCD Backlight */ - .pwm_id = 2, .max_brightness = 1023, .dft_brightness = 512, - .pwm_period_ns = 1260320, .enable_gpio = -1, }, }; @@ -236,6 +240,7 @@ static struct platform_device z2_backlight_devices[2] = { }; static void __init z2_pwm_init(void) { + pwm_add_table(z2_pwm_lookup, ARRAY_SIZE(z2_pwm_lookup)); platform_device_register(&z2_backlight_devices[0]); platform_device_register(&z2_backlight_devices[1]); } @@ -595,13 +600,11 @@ static struct spi_board_info spi_board_info[] __initdata = { }; static struct pxa2xx_spi_master pxa_ssp1_master_info = { - .clock_enable = CKEN_SSP, .num_chipselect = 1, .enable_dma = 1, }; static struct pxa2xx_spi_master pxa_ssp2_master_info = { - .clock_enable = CKEN_SSP2, .num_chipselect = 1, }; diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 77daea478e88..e20359a7433c 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> @@ -120,11 +121,14 @@ static inline void zylonite_init_leds(void) {} #endif #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pwm_lookup zylonite_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.1", 1, "pwm-backlight.0", NULL, 10000, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data zylonite_backlight_data = { - .pwm_id = 3, .max_brightness = 100, .dft_brightness = 100, - .pwm_period_ns = 10000, .enable_gpio = -1, }; @@ -206,6 +210,7 @@ static struct pxafb_mach_info zylonite_sharp_lcd_info = { static void __init zylonite_init_lcd(void) { + pwm_add_table(zylonite_pwm_lookup, ARRAY_SIZE(zylonite_pwm_lookup)); platform_device_register(&zylonite_backlight_device); if (lcd_id & 0x20) { diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c index 5cde63a64b34..9b00123a315d 100644 --- a/arch/arm/mach-qcom/platsmp.c +++ b/arch/arm/mach-qcom/platsmp.c @@ -49,7 +49,7 @@ extern void secondary_startup_arm(void); static DEFINE_SPINLOCK(boot_lock); #ifdef CONFIG_HOTPLUG_CPU -static void __ref qcom_cpu_die(unsigned int cpu) +static void qcom_cpu_die(unsigned int cpu) { wfi(); } diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c index ac22dd41b135..968e2d1964f6 100644 --- a/arch/arm/mach-realview/hotplug.c +++ b/arch/arm/mach-realview/hotplug.c @@ -90,7 +90,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) * * Called with IRQs disabled */ -void __ref realview_cpu_die(unsigned int cpu) +void realview_cpu_die(unsigned int cpu) { int spurious = 0; diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index d40d4f5244c6..9f54300df4b3 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -25,6 +25,7 @@ #include <linux/gpio.h> #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/i2c.h> #include <linux/leds.h> @@ -469,6 +470,11 @@ static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = { .ocr_avail = MMC_VDD_32_33, }; +static struct pwm_lookup h1940_pwm_lookup[] = { + PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 36296, + PWM_POLARITY_NORMAL), +}; + static int h1940_backlight_init(struct device *dev) { gpio_request(S3C2410_GPB(0), "Backlight"); @@ -503,11 +509,8 @@ static void h1940_backlight_exit(struct device *dev) static struct platform_pwm_backlight_data backlight_data = { - .pwm_id = 0, .max_brightness = 100, .dft_brightness = 50, - /* tcnt = 0x31 */ - .pwm_period_ns = 36296, .enable_gpio = -1, .init = h1940_backlight_init, .notify = h1940_backlight_notify, @@ -725,6 +728,7 @@ static void __init h1940_init(void) gpio_request(H1940_LATCH_SD_POWER, "SD power"); gpio_direction_output(H1940_LATCH_SD_POWER, 0); + pwm_add_table(h1940_pwm_lookup, ARRAY_SIZE(h1940_pwm_lookup)); platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices)); gpio_request(S3C2410_GPA(1), "Red LED blink"); diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 1d35ff375a01..774c982a7b7e 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -375,6 +375,11 @@ static struct s3c2410fb_mach_info rx1950_lcd_cfg = { }; +static struct pwm_lookup rx1950_pwm_lookup[] = { + PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight.0", NULL, 48000, + PWM_POLARITY_NORMAL), +}; + static struct pwm_device *lcd_pwm; static void rx1950_lcd_power(int enable) @@ -520,10 +525,8 @@ static int rx1950_backlight_notify(struct device *dev, int brightness) } static struct platform_pwm_backlight_data rx1950_backlight_data = { - .pwm_id = 0, .max_brightness = 24, .dft_brightness = 4, - .pwm_period_ns = 48000, .enable_gpio = -1, .init = rx1950_backlight_init, .notify = rx1950_backlight_notify, @@ -792,6 +795,7 @@ static void __init rx1950_init_machine(void) gpio_direction_output(S3C2410_GPA(4), 0); gpio_direction_output(S3C2410_GPJ(6), 0); + pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup)); platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices)); i2c_register_board_info(0, rx1950_i2c_devices, diff --git a/arch/arm/mach-s3c64xx/dev-backlight.c b/arch/arm/mach-s3c64xx/dev-backlight.c index 38c323e68e3f..e62e789f9aee 100644 --- a/arch/arm/mach-s3c64xx/dev-backlight.c +++ b/arch/arm/mach-s3c64xx/dev-backlight.c @@ -69,7 +69,6 @@ static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = { .plat_data = { .max_brightness = 255, .dft_brightness = 255, - .pwm_period_ns = 78770, .enable_gpio = -1, .init = samsung_bl_init, .exit = samsung_bl_exit, @@ -111,7 +110,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, samsung_bl_data = &samsung_bl_drvdata->plat_data; /* Copy board specific data provided by user */ - samsung_bl_data->pwm_id = bl_data->pwm_id; samsung_bl_device->dev.parent = &samsung_device_pwm.dev; if (bl_data->max_brightness) @@ -120,8 +118,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, samsung_bl_data->dft_brightness = bl_data->dft_brightness; if (bl_data->lth_brightness) samsung_bl_data->lth_brightness = bl_data->lth_brightness; - if (bl_data->pwm_period_ns) - samsung_bl_data->pwm_period_ns = bl_data->pwm_period_ns; if (bl_data->enable_gpio >= 0) samsung_bl_data->enable_gpio = bl_data->enable_gpio; if (bl_data->init) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 14bd9ae3f476..f776adcdaee8 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -25,6 +25,7 @@ #include <linux/mmc/host.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/dm9000.h> #include <linux/gpio_keys.h> @@ -108,11 +109,14 @@ static struct s3c2410_uartcfg crag6410_uartcfgs[] __initdata = { }, }; +static struct pwm_lookup crag6410_pwm_lookup[] = { + PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 100000, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data crag6410_backlight_data = { - .pwm_id = 0, .max_brightness = 1000, .dft_brightness = 600, - .pwm_period_ns = 100000, /* about 1kHz */ .enable_gpio = -1, }; @@ -843,6 +847,7 @@ static void __init crag6410_machine_init(void) samsung_keypad_set_platdata(&crag6410_keypad_data); s3c64xx_spi0_set_platdata(NULL, 0, 2); + pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup)); platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices)); gpio_led_register_device(-1, &gpio_leds_pdata); diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index e4b087c58ee6..816b39d1e6d1 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/delay.h> #include <linux/leds.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -73,6 +74,11 @@ static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = { }, }; +static struct pwm_lookup hmt_pwm_lookup[] = { + PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL, + 1000000000 / (100 * 256 * 20), PWM_POLARITY_NORMAL), +}; + static int hmt_bl_init(struct device *dev) { int ret; @@ -110,10 +116,8 @@ static void hmt_bl_exit(struct device *dev) } static struct platform_pwm_backlight_data hmt_backlight_data = { - .pwm_id = 1, .max_brightness = 100 * 256, .dft_brightness = 40 * 256, - .pwm_period_ns = 1000000000 / (100 * 256 * 20), .enable_gpio = -1, .init = hmt_bl_init, .notify = hmt_bl_notify, @@ -268,6 +272,7 @@ static void __init hmt_machine_init(void) gpio_request(S3C64XX_GPF(13), "usb power"); gpio_direction_output(S3C64XX_GPF(13), 1); + pwm_add_table(hmt_pwm_lookup, ARRAY_SIZE(hmt_pwm_lookup)); platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices)); } diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index 719843dca510..acdfb5fac40f 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -14,6 +14,7 @@ #include <linux/gpio.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/serial_core.h> #include <linux/serial_s3c.h> @@ -139,6 +140,11 @@ static struct platform_device smartq_usb_otg_vbus_dev = { .dev.platform_data = &smartq_usb_otg_vbus_pdata, }; +static struct pwm_lookup smartq_pwm_lookup[] = { + PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL, + 1000000000 / (1000 * 20), PWM_POLARITY_NORMAL), +}; + static int smartq_bl_init(struct device *dev) { s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2)); @@ -147,10 +153,8 @@ static int smartq_bl_init(struct device *dev) } static struct platform_pwm_backlight_data smartq_backlight_data = { - .pwm_id = 1, .max_brightness = 1000, .dft_brightness = 600, - .pwm_period_ns = 1000000000 / (1000 * 20), .enable_gpio = -1, .init = smartq_bl_init, }; @@ -396,5 +400,6 @@ void __init smartq_machine_init(void) WARN_ON(smartq_usb_host_init()); WARN_ON(smartq_wifi_init()); + pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup)); platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices)); } diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 286c9bd676e1..30fd27853072 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -30,6 +30,7 @@ #include <linux/smsc911x.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/platform_data/s3c-hsotg.h> @@ -623,8 +624,12 @@ static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = { .func = S3C_GPIO_SFN(2), }; +static struct pwm_lookup smdk6410_pwm_lookup[] = { + PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL, 78770, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data smdk6410_bl_data = { - .pwm_id = 1, .enable_gpio = -1, }; @@ -695,6 +700,7 @@ static void __init smdk6410_machine_init(void) platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices)); + pwm_add_table(smdk6410_pwm_lookup, ARRAY_SIZE(smdk6410_pwm_lookup)); samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data); } diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 926e336d6aeb..88734a5e10ca 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -98,76 +98,3 @@ config ARCH_SH73A0 comment "Renesas ARM SoCs System Configuration" endif - -if ARCH_SHMOBILE_LEGACY - -comment "Renesas ARM SoCs System Type" - -config ARCH_R8A7778 - bool "R-Car M1A (R8A77781)" - select ARCH_RCAR_GEN1 - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_GIC - -config ARCH_R8A7779 - bool "R-Car H1 (R8A77790)" - select ARCH_RCAR_GEN1 - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_GIC - -comment "Renesas ARM SoCs Board Type" - -config MACH_BOCKW - bool "BOCK-W platform" - depends on ARCH_R8A7778 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SND_SOC_AK4554 if SND_SIMPLE_CARD - select SND_SOC_AK4642 if SND_SIMPLE_CARD && I2C - select USE_OF - -config MACH_BOCKW_REFERENCE - bool "BOCK-W - Reference Device Tree Implementation" - depends on ARCH_R8A7778 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - select USE_OF - ---help--- - Use reference implementation of BockW board support - which makes use of device tree at the expense - of not supporting a number of devices. - - This is intended to aid developers - -comment "Renesas ARM SoCs System Configuration" - -config CPU_HAS_INTEVT - bool - default y - -config SH_CLK_CPG - bool - -source "drivers/sh/Kconfig" - -endif - -if ARCH_SHMOBILE - -menu "Timer and clock configuration" - -config SHMOBILE_TIMER_HZ - int "Kernel HZ (jiffies per second)" - range 32 1024 - default "128" - help - Allows the configuration of the timer frequency. It is customary - to have the timer interrupt run at 1000 Hz or 100 Hz, but in the - case of low timer frequencies other values may be more suitable. - Renesas ARM SoC systems using a 32768 Hz RCLK for clock events may - want to select a HZ value such as 128 that can evenly divide RCLK. - A HZ value that does not divide evenly may cause timer drift. - -endmenu - -endif diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 476de30798d7..a65c80ac9009 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -3,7 +3,7 @@ # # Common objects -obj-y := timer.o console.o +obj-y := timer.o # CPU objects obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o @@ -18,12 +18,6 @@ obj-$(CONFIG_ARCH_R8A7794) += setup-r8a7794.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o -# Clock objects -ifndef CONFIG_COMMON_CLK -obj-y += clock.o -obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o -endif - # CPU reset vector handling objects cpu-y := platsmp.o headsmp.o @@ -49,11 +43,5 @@ obj-$(CONFIG_PM_RCAR) += pm-rcar.o obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o -# Board objects -ifndef CONFIG_ARCH_SHMOBILE_MULTI -obj-$(CONFIG_MACH_BOCKW) += board-bockw.o -obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o -endif - # Framework support obj-$(CONFIG_SMP) += $(smp-y) diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot deleted file mode 100644 index a489fe9a76cd..000000000000 --- a/arch/arm/mach-shmobile/Makefile.boot +++ /dev/null @@ -1,12 +0,0 @@ -# per-board load address for uImage -loadaddr-y := -loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 -loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000 - -__ZRELADDR := $(sort $(loadaddr-y)) - zreladdr-y += $(__ZRELADDR) - -# Unsupported legacy stuff -# -#params_phys-y (Instead: Pass atags pointer in r2) -#initrd_phys-y (Instead: Use compiled-in initramfs) diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c deleted file mode 100644 index 4f78296f7d04..000000000000 --- a/arch/arm/mach-shmobile/board-bockw-reference.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Bock-W board support - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/of_platform.h> - -#include <asm/mach/arch.h> - -#include "common.h" -#include "r8a7778.h" - -/* - * see board-bock.c for checking detail of dip-switch - */ - -#define FPGA 0x18200000 -#define IRQ0MR 0x30 -#define COMCTLR 0x101c - -#define PFC 0xfffc0000 -#define PUPR4 0x110 -static void __init bockw_init(void) -{ - void __iomem *fpga; - void __iomem *pfc; - -#ifndef CONFIG_COMMON_CLK - r8a7778_clock_init(); -#endif - r8a7778_init_irq_extpin_dt(1); - r8a7778_add_dt_devices(); - - fpga = ioremap_nocache(FPGA, SZ_1M); - if (fpga) { - /* - * CAUTION - * - * IRQ0/1 is cascaded interrupt from FPGA. - * it should be cared in the future - * Now, it is assuming IRQ0 was used only from SMSC. - */ - u16 val = ioread16(fpga + IRQ0MR); - val &= ~(1 << 4); /* enable SMSC911x */ - iowrite16(val, fpga + IRQ0MR); - - iounmap(fpga); - } - - pfc = ioremap_nocache(PFC, 0x200); - if (pfc) { - /* - * FIXME - * - * SDHI CD/WP pin needs pull-up - */ - iowrite32(ioread32(pfc + PUPR4) | (3 << 26), pfc + PUPR4); - iounmap(pfc); - } - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char *const bockw_boards_compat_dt[] __initconst = { - "renesas,bockw-reference", - NULL, -}; - -DT_MACHINE_START(BOCKW_DT, "bockw") - .init_early = shmobile_init_delay, - .init_irq = r8a7778_init_irq_dt, - .init_machine = bockw_init, - .init_late = shmobile_init_late, - .dt_compat = bockw_boards_compat_dt, -MACHINE_END diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c deleted file mode 100644 index 25a0e7233fe4..000000000000 --- a/arch/arm/mach-shmobile/board-bockw.c +++ /dev/null @@ -1,737 +0,0 @@ -/* - * Bock-W board support - * - * Copyright (C) 2013-2014 Renesas Solutions Corp. - * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * Copyright (C) 2013-2014 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/mfd/tmio.h> -#include <linux/mmc/host.h> -#include <linux/mmc/sh_mobile_sdhi.h> -#include <linux/mmc/sh_mmcif.h> -#include <linux/mtd/partitions.h> -#include <linux/pinctrl/machine.h> -#include <linux/platform_data/camera-rcar.h> -#include <linux/platform_data/usb-rcar-phy.h> -#include <linux/platform_device.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/smsc911x.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/usb/renesas_usbhs.h> - -#include <media/soc_camera.h> -#include <asm/mach/arch.h> -#include <sound/rcar_snd.h> -#include <sound/simple_card.h> - -#include "common.h" -#include "irqs.h" -#include "r8a7778.h" - -#define FPGA 0x18200000 -#define IRQ0MR 0x30 -#define COMCTLR 0x101c -static void __iomem *fpga; - -/* - * CN9(Upper side) SCIF/RCAN selection - * - * 1,4 3,6 - * SW40 SCIF RCAN - * SW41 SCIF RCAN - */ - -/* - * MMC (CN26) pin - * - * SW6 (D2) 3 pin - * SW7 (D5) ON - * SW8 (D3) 3 pin - * SW10 (D4) 1 pin - * SW12 (CLK) 1 pin - * SW13 (D6) 3 pin - * SW14 (CMD) ON - * SW15 (D6) 1 pin - * SW16 (D0) ON - * SW17 (D1) ON - * SW18 (D7) 3 pin - * SW19 (MMC) 1 pin - */ - -/* - * SSI settings - * - * SW45: 1-4 side (SSI5 out, ROUT/LOUT CN19 Mid) - * SW46: 1101 (SSI6 Recorde) - * SW47: 1110 (SSI5 Playback) - * SW48: 11 (Recorde power) - * SW49: 1 (SSI slave mode) - * SW50: 1111 (SSI7, SSI8) - * SW51: 1111 (SSI3, SSI4) - * SW54: 1pin (ak4554 FPGA control) - * SW55: 1 (CLKB is 24.5760MHz) - * SW60: 1pin (ak4554 FPGA control) - * SW61: 3pin (use X11 clock) - * SW78: 3-6 (ak4642 connects I2C0) - * - * You can use sound as - * - * hw0: CN19: SSI56-AK4643 - * hw1: CN21: SSI3-AK4554(playback) - * hw2: CN21: SSI4-AK4554(capture) - * hw3: CN20: SSI7-AK4554(playback) - * hw4: CN20: SSI8-AK4554(capture) - * - * this command is required when playback on hw0. - * - * # amixer set "LINEOUT Mixer DACL" on - */ - -/* - * USB - * - * USB1 (CN29) can be Host/Function - * - * Host Func - * SW98 1 2 - * SW99 1 3 - */ - -/* Dummy supplies, where voltage doesn't matter */ -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x"), - REGULATOR_SUPPLY("vdd33a", "smsc911x"), -}; - -static struct regulator_consumer_supply fixed3v3_power_consumers[] = { - REGULATOR_SUPPLY("vmmc", "sh_mmcif"), - REGULATOR_SUPPLY("vqmmc", "sh_mmcif"), -}; - -static struct smsc911x_platform_config smsc911x_data __initdata = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_32BIT, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct resource smsc911x_resources[] __initdata = { - DEFINE_RES_MEM(0x18300000, 0x1000), - DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */ -}; - -#if IS_ENABLED(CONFIG_USB_RENESAS_USBHS_UDC) -/* - * When USB1 is Func - */ -static int usbhsf_get_id(struct platform_device *pdev) -{ - return USBHS_GADGET; -} - -#define SUSPMODE 0x102 -static int usbhsf_power_ctrl(struct platform_device *pdev, - void __iomem *base, int enable) -{ - enable = !!enable; - - r8a7778_usb_phy_power(enable); - - iowrite16(enable << 14, base + SUSPMODE); - - return 0; -} - -static struct resource usbhsf_resources[] __initdata = { - DEFINE_RES_MEM(0xffe60000, 0x110), - DEFINE_RES_IRQ(gic_iid(0x4f)), -}; - -static struct renesas_usbhs_platform_info usbhs_info __initdata = { - .platform_callback = { - .get_id = usbhsf_get_id, - .power_ctrl = usbhsf_power_ctrl, - }, - .driver_param = { - .buswait_bwait = 4, - .d0_tx_id = HPBDMA_SLAVE_USBFUNC_TX, - .d1_rx_id = HPBDMA_SLAVE_USBFUNC_RX, - }, -}; - -#define USB_PHY_SETTING {.port1_func = 1, .ovc_pin[1].active_high = 1,} -#define USB1_DEVICE "renesas_usbhs" -#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE() \ - platform_device_register_resndata( \ - NULL, "renesas_usbhs", -1, \ - usbhsf_resources, \ - ARRAY_SIZE(usbhsf_resources), \ - &usbhs_info, sizeof(struct renesas_usbhs_platform_info)) - -#else -/* - * When USB1 is Host - */ -#define USB_PHY_SETTING { } -#define USB1_DEVICE "ehci-platform" -#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE() - -#endif - -/* USB */ -static struct resource usb_phy_resources[] __initdata = { - DEFINE_RES_MEM(0xffe70800, 0x100), - DEFINE_RES_MEM(0xffe76000, 0x100), -}; - -static struct rcar_phy_platform_data usb_phy_platform_data __initdata = - USB_PHY_SETTING; - - -/* SDHI */ -static struct tmio_mmc_data sdhi0_info __initdata = { - .chan_priv_tx = (void *)HPBDMA_SLAVE_SDHI0_TX, - .chan_priv_rx = (void *)HPBDMA_SLAVE_SDHI0_RX, - .capabilities = MMC_CAP_SD_HIGHSPEED, - .ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, - .flags = TMIO_MMC_HAS_IDLE_WAIT, -}; - -static struct resource sdhi0_resources[] __initdata = { - DEFINE_RES_MEM(0xFFE4C000, 0x100), - DEFINE_RES_IRQ(gic_iid(0x77)), -}; - -/* Ether */ -static struct resource ether_resources[] __initdata = { - DEFINE_RES_MEM(0xfde00000, 0x400), - DEFINE_RES_IRQ(gic_iid(0x89)), -}; - -static struct sh_eth_plat_data ether_platform_data __initdata = { - .phy = 0x01, - .edmac_endian = EDMAC_LITTLE_ENDIAN, - .phy_interface = PHY_INTERFACE_MODE_RMII, - /* - * Although the LINK signal is available on the board, it's connected to - * the link/activity LED output of the PHY, thus the link disappears and - * reappears after each packet. We'd be better off ignoring such signal - * and getting the link state from the PHY indirectly. - */ - .no_ether_link = 1, -}; - -static struct platform_device_info ether_info __initdata = { - .name = "r8a777x-ether", - .id = -1, - .res = ether_resources, - .num_res = ARRAY_SIZE(ether_resources), - .data = ðer_platform_data, - .size_data = sizeof(ether_platform_data), - .dma_mask = DMA_BIT_MASK(32), -}; - -/* I2C */ -static struct i2c_board_info i2c0_devices[] = { - { - I2C_BOARD_INFO("rx8581", 0x51), - }, { - I2C_BOARD_INFO("ak4643", 0x12), - } -}; - -/* HSPI*/ -static struct mtd_partition m25p80_spi_flash_partitions[] = { - { - .name = "data(spi)", - .size = 0x0100000, - .offset = 0, - }, -}; - -static struct flash_platform_data spi_flash_data = { - .name = "m25p80", - .type = "s25fl008k", - .parts = m25p80_spi_flash_partitions, - .nr_parts = ARRAY_SIZE(m25p80_spi_flash_partitions), -}; - -static struct spi_board_info spi_board_info[] __initdata = { - { - .modalias = "m25p80", - .max_speed_hz = 104000000, - .chip_select = 0, - .bus_num = 0, - .mode = SPI_MODE_0, - .platform_data = &spi_flash_data, - }, -}; - -/* MMC */ -static struct resource mmc_resources[] __initdata = { - DEFINE_RES_MEM(0xffe4e000, 0x100), - DEFINE_RES_IRQ(gic_iid(0x5d)), -}; - -static struct sh_mmcif_plat_data sh_mmcif_plat __initdata = { - .sup_pclk = 0, - .caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_8_BIT_DATA | - MMC_CAP_NEEDS_POLL, -}; - -/* In the default configuration both decoders reside on I2C bus 0 */ -#define BOCKW_CAMERA(idx) \ -static struct i2c_board_info camera##idx##_info = { \ - I2C_BOARD_INFO("ml86v7667", 0x41 + 2 * (idx)), \ -}; \ - \ -static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = { \ - .bus_id = idx, \ - .i2c_adapter_id = 0, \ - .board_info = &camera##idx##_info, \ -} - -BOCKW_CAMERA(0); -BOCKW_CAMERA(1); - -/* VIN */ -static struct rcar_vin_platform_data vin_platform_data __initdata = { - .flags = RCAR_VIN_BT656, -}; - -#define R8A7778_VIN(idx) \ -static struct resource vin##idx##_resources[] __initdata = { \ - DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000), \ - DEFINE_RES_IRQ(gic_iid(0x5a)), \ -}; \ - \ -static struct platform_device_info vin##idx##_info __initdata = { \ - .name = "r8a7778-vin", \ - .id = idx, \ - .res = vin##idx##_resources, \ - .num_res = ARRAY_SIZE(vin##idx##_resources), \ - .dma_mask = DMA_BIT_MASK(32), \ - .data = &vin_platform_data, \ - .size_data = sizeof(vin_platform_data), \ -} -R8A7778_VIN(0); -R8A7778_VIN(1); - -/* Sound */ -static struct resource rsnd_resources[] __initdata = { - [RSND_GEN1_SRU] = DEFINE_RES_MEM(0xffd90000, 0x1000), - [RSND_GEN1_SSI] = DEFINE_RES_MEM(0xffd91000, 0x1240), - [RSND_GEN1_ADG] = DEFINE_RES_MEM(0xfffe0000, 0x24), -}; - -static struct rsnd_ssi_platform_info rsnd_ssi[] = { - RSND_SSI_UNUSED, /* SSI 0 */ - RSND_SSI_UNUSED, /* SSI 1 */ - RSND_SSI_UNUSED, /* SSI 2 */ - RSND_SSI(HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), 0), - RSND_SSI(HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE), - RSND_SSI(HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), 0), - RSND_SSI(HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0), - RSND_SSI(HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), 0), - RSND_SSI(HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE), -}; - -static struct rsnd_src_platform_info rsnd_src[9] = { - RSND_SRC_UNUSED, /* SRU 0 */ - RSND_SRC_UNUSED, /* SRU 1 */ - RSND_SRC_UNUSED, /* SRU 2 */ - RSND_SRC(0, 0), - RSND_SRC(0, 0), - RSND_SRC(0, 0), - RSND_SRC(0, 0), - RSND_SRC(0, 0), - RSND_SRC(0, 0), -}; - -static struct rsnd_dai_platform_info rsnd_dai[] = { - { - .playback = { .ssi = &rsnd_ssi[5], .src = &rsnd_src[5] }, - .capture = { .ssi = &rsnd_ssi[6], .src = &rsnd_src[6] }, - }, { - .playback = { .ssi = &rsnd_ssi[3], .src = &rsnd_src[3] }, - }, { - .capture = { .ssi = &rsnd_ssi[4], .src = &rsnd_src[4] }, - }, { - .playback = { .ssi = &rsnd_ssi[7], .src = &rsnd_src[7] }, - }, { - .capture = { .ssi = &rsnd_ssi[8], .src = &rsnd_src[8] }, - }, -}; - -enum { - AK4554_34 = 0, - AK4643_56, - AK4554_78, - SOUND_MAX, -}; - -static int rsnd_codec_power(int id, int enable) -{ - static int sound_user[SOUND_MAX] = {0, 0, 0}; - int *usr = NULL; - u32 bit; - - switch (id) { - case 3: - case 4: - usr = sound_user + AK4554_34; - bit = (1 << 10); - break; - case 5: - case 6: - usr = sound_user + AK4643_56; - bit = (1 << 6); - break; - case 7: - case 8: - usr = sound_user + AK4554_78; - bit = (1 << 7); - break; - } - - if (!usr) - return -EIO; - - if (enable) { - if (*usr == 0) { - u32 val = ioread16(fpga + COMCTLR); - val &= ~bit; - iowrite16(val, fpga + COMCTLR); - } - - (*usr)++; - } else { - if (*usr == 0) - return 0; - - (*usr)--; - - if (*usr == 0) { - u32 val = ioread16(fpga + COMCTLR); - val |= bit; - iowrite16(val, fpga + COMCTLR); - } - } - - return 0; -} - -static int rsnd_start(int id) -{ - return rsnd_codec_power(id, 1); -} - -static int rsnd_stop(int id) -{ - return rsnd_codec_power(id, 0); -} - -static struct rcar_snd_info rsnd_info = { - .flags = RSND_GEN1, - .ssi_info = rsnd_ssi, - .ssi_info_nr = ARRAY_SIZE(rsnd_ssi), - .src_info = rsnd_src, - .src_info_nr = ARRAY_SIZE(rsnd_src), - .dai_info = rsnd_dai, - .dai_info_nr = ARRAY_SIZE(rsnd_dai), - .start = rsnd_start, - .stop = rsnd_stop, -}; - -static struct asoc_simple_card_info rsnd_card_info[] = { - /* SSI5, SSI6 */ - { - .name = "AK4643", - .card = "SSI56-AK4643", - .codec = "ak4642-codec.0-0012", - .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM, - .cpu_dai = { - .name = "rsnd-dai.0", - }, - .codec_dai = { - .name = "ak4642-hifi", - .sysclk = 11289600, - }, - }, - /* SSI3 */ - { - .name = "AK4554", - .card = "SSI3-AK4554(playback)", - .codec = "ak4554-adc-dac.0", - .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J, - .cpu_dai = { - .name = "rsnd-dai.1", - }, - .codec_dai = { - .name = "ak4554-hifi", - }, - }, - /* SSI4 */ - { - .name = "AK4554", - .card = "SSI4-AK4554(capture)", - .codec = "ak4554-adc-dac.0", - .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J, - .cpu_dai = { - .name = "rsnd-dai.2", - }, - .codec_dai = { - .name = "ak4554-hifi", - }, - }, - /* SSI7 */ - { - .name = "AK4554", - .card = "SSI7-AK4554(playback)", - .codec = "ak4554-adc-dac.1", - .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J, - .cpu_dai = { - .name = "rsnd-dai.3", - }, - .codec_dai = { - .name = "ak4554-hifi", - }, - }, - /* SSI8 */ - { - .name = "AK4554", - .card = "SSI8-AK4554(capture)", - .codec = "ak4554-adc-dac.1", - .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J, - .cpu_dai = { - .name = "rsnd-dai.4", - }, - .codec_dai = { - .name = "ak4554-hifi", - }, - } -}; - -static const struct pinctrl_map bockw_pinctrl_map[] = { - /* AUDIO */ - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "audio_clk_a", "audio_clk"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "audio_clk_b", "audio_clk"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi34_ctrl", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi3_data", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi4_data", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi5_ctrl", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi5_data", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi6_ctrl", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi6_data", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi78_ctrl", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi7_data", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", - "ssi8_data", "ssi"), - /* Ether */ - PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778", - "ether_rmii", "ether"), - /* HSPI0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7778", - "hspi0_a", "hspi0"), - /* MMC */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778", - "mmc_data8", "mmc"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778", - "mmc_ctrl", "mmc"), - /* SCIF0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", - "scif0_data_a", "scif0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", - "scif0_ctrl", "scif0"), - /* USB */ - PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778", - "usb0", "usb0"), - PIN_MAP_MUX_GROUP_DEFAULT(USB1_DEVICE, "pfc-r8a7778", - "usb1", "usb1"), - /* SDHI0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", - "sdhi0_data4", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", - "sdhi0_ctrl", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", - "sdhi0_cd", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", - "sdhi0_wp", "sdhi0"), - /* VIN0 */ - PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778", - "vin0_clk", "vin0"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778", - "vin0_data8", "vin0"), - /* VIN1 */ - PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778", - "vin1_clk", "vin1"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778", - "vin1_data8", "vin1"), -}; - -#define PFC 0xfffc0000 -#define PUPR4 0x110 -static void __init bockw_init(void) -{ - void __iomem *base; - struct clk *clk; - struct platform_device *pdev; - int i; - - r8a7778_clock_init(); - r8a7778_init_irq_extpin(1); - r8a7778_add_standard_devices(); - - platform_device_register_full(ðer_info); - - platform_device_register_full(&vin0_info); - /* VIN1 has a pin conflict with Ether */ - if (!IS_ENABLED(CONFIG_SH_ETH)) - platform_device_register_full(&vin1_info); - platform_device_register_data(NULL, "soc-camera-pdrv", 0, - &iclink0_ml86v7667, - sizeof(iclink0_ml86v7667)); - platform_device_register_data(NULL, "soc-camera-pdrv", 1, - &iclink1_ml86v7667, - sizeof(iclink1_ml86v7667)); - - i2c_register_board_info(0, i2c0_devices, - ARRAY_SIZE(i2c0_devices)); - spi_register_board_info(spi_board_info, - ARRAY_SIZE(spi_board_info)); - pinctrl_register_mappings(bockw_pinctrl_map, - ARRAY_SIZE(bockw_pinctrl_map)); - r8a7778_pinmux_init(); - - platform_device_register_resndata( - NULL, "sh_mmcif", -1, - mmc_resources, ARRAY_SIZE(mmc_resources), - &sh_mmcif_plat, sizeof(struct sh_mmcif_plat_data)); - - platform_device_register_resndata( - NULL, "rcar_usb_phy", -1, - usb_phy_resources, - ARRAY_SIZE(usb_phy_resources), - &usb_phy_platform_data, - sizeof(struct rcar_phy_platform_data)); - - regulator_register_fixed(0, dummy_supplies, - ARRAY_SIZE(dummy_supplies)); - regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers, - ARRAY_SIZE(fixed3v3_power_consumers), 3300000); - - /* for SMSC */ - fpga = ioremap_nocache(FPGA, SZ_1M); - if (fpga) { - /* - * CAUTION - * - * IRQ0/1 is cascaded interrupt from FPGA. - * it should be cared in the future - * Now, it is assuming IRQ0 was used only from SMSC. - */ - u16 val = ioread16(fpga + IRQ0MR); - val &= ~(1 << 4); /* enable SMSC911x */ - iowrite16(val, fpga + IRQ0MR); - - platform_device_register_resndata( - NULL, "smsc911x", -1, - smsc911x_resources, ARRAY_SIZE(smsc911x_resources), - &smsc911x_data, sizeof(smsc911x_data)); - } - - /* for SDHI */ - base = ioremap_nocache(PFC, 0x200); - if (base) { - /* - * FIXME - * - * SDHI CD/WP pin needs pull-up - */ - iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4); - iounmap(base); - - platform_device_register_resndata( - NULL, "sh_mobile_sdhi", 0, - sdhi0_resources, ARRAY_SIZE(sdhi0_resources), - &sdhi0_info, sizeof(struct tmio_mmc_data)); - } - - /* for Audio */ - rsnd_codec_power(5, 1); /* enable ak4642 */ - - platform_device_register_simple( - "ak4554-adc-dac", 0, NULL, 0); - - platform_device_register_simple( - "ak4554-adc-dac", 1, NULL, 0); - - pdev = platform_device_register_resndata( - NULL, "rcar_sound", -1, - rsnd_resources, ARRAY_SIZE(rsnd_resources), - &rsnd_info, sizeof(rsnd_info)); - - clk = clk_get(&pdev->dev, "clk_b"); - clk_set_rate(clk, 24576000); - clk_put(clk); - - for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) { - struct platform_device_info cardinfo = { - .name = "asoc-simple-card", - .id = i, - .data = &rsnd_card_info[i], - .size_data = sizeof(struct asoc_simple_card_info), - .dma_mask = DMA_BIT_MASK(32), - }; - - platform_device_register_full(&cardinfo); - } -} - -static void __init bockw_init_late(void) -{ - r8a7778_init_late(); - ADD_USB_FUNC_DEVICE_IF_POSSIBLE(); -} - -static const char *const bockw_boards_compat_dt[] __initconst = { - "renesas,bockw", - NULL, -}; - -DT_MACHINE_START(BOCKW_DT, "bockw") - .init_early = shmobile_init_delay, - .init_irq = r8a7778_init_irq_dt, - .init_machine = bockw_init, - .dt_compat = bockw_boards_compat_dt, - .init_late = bockw_init_late, -MACHINE_END diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c deleted file mode 100644 index e8510c35558c..000000000000 --- a/arch/arm/mach-shmobile/clock-r8a7778.c +++ /dev/null @@ -1,342 +0,0 @@ -/* - * r8a7778 clock framework support - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * based on r8a7779 - * - * Copyright (C) 2011 Renesas Solutions Corp. - * Copyright (C) 2011 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * MD MD MD MD PLLA PLLB EXTAL clki clkz - * 19 18 12 11 (HMz) (MHz) (MHz) - *---------------------------------------------------------------------------- - * 1 0 0 0 x21 x21 38.00 800 800 - * 1 0 0 1 x24 x24 33.33 800 800 - * 1 0 1 0 x28 x28 28.50 800 800 - * 1 0 1 1 x32 x32 25.00 800 800 - * 1 1 0 1 x24 x21 33.33 800 700 - * 1 1 1 0 x28 x21 28.50 800 600 - * 1 1 1 1 x32 x24 25.00 800 600 - */ - -#include <linux/io.h> -#include <linux/sh_clk.h> -#include <linux/clkdev.h> -#include "clock.h" -#include "common.h" - -#define MSTPCR0 IOMEM(0xffc80030) -#define MSTPCR1 IOMEM(0xffc80034) -#define MSTPCR3 IOMEM(0xffc8003c) -#define MSTPSR1 IOMEM(0xffc80044) -#define MSTPSR4 IOMEM(0xffc80048) -#define MSTPSR6 IOMEM(0xffc8004c) -#define MSTPCR4 IOMEM(0xffc80050) -#define MSTPCR5 IOMEM(0xffc80054) -#define MSTPCR6 IOMEM(0xffc80058) -#define MODEMR 0xFFCC0020 - -#define MD(nr) BIT(nr) - -/* ioremap() through clock mapping mandatory to avoid - * collision with ARM coherent DMA virtual memory range. - */ - -static struct clk_mapping cpg_mapping = { - .phys = 0xffc80000, - .len = 0x80, -}; - -static struct clk extal_clk = { - /* .rate will be updated on r8a7778_clock_init() */ - .mapping = &cpg_mapping, -}; - -static struct clk audio_clk_a = { -}; - -static struct clk audio_clk_b = { -}; - -static struct clk audio_clk_c = { -}; - -/* - * clock ratio of these clock will be updated - * on r8a7778_clock_init() - */ -SH_FIXED_RATIO_CLK_SET(plla_clk, extal_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(pllb_clk, extal_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(i_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(s_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(s1_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(s3_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(s4_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(b_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(out_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(p_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(g_clk, plla_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(z_clk, pllb_clk, 1, 1); - -static struct clk *main_clks[] = { - &extal_clk, - &plla_clk, - &pllb_clk, - &i_clk, - &s_clk, - &s1_clk, - &s3_clk, - &s4_clk, - &b_clk, - &out_clk, - &p_clk, - &g_clk, - &z_clk, - &audio_clk_a, - &audio_clk_b, - &audio_clk_c, -}; - -enum { - MSTP531, MSTP530, - MSTP529, MSTP528, MSTP527, MSTP526, MSTP525, MSTP524, MSTP523, - MSTP331, - MSTP323, MSTP322, MSTP321, - MSTP311, MSTP310, - MSTP309, MSTP308, MSTP307, - MSTP114, - MSTP110, MSTP109, - MSTP100, - MSTP030, - MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, - MSTP016, MSTP015, MSTP012, MSTP011, MSTP010, - MSTP009, MSTP008, MSTP007, - MSTP_NR }; - -static struct clk mstp_clks[MSTP_NR] = { - [MSTP531] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 31, 0), /* SCU0 */ - [MSTP530] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 30, 0), /* SCU1 */ - [MSTP529] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 29, 0), /* SCU2 */ - [MSTP528] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 28, 0), /* SCU3 */ - [MSTP527] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 27, 0), /* SCU4 */ - [MSTP526] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 26, 0), /* SCU5 */ - [MSTP525] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 25, 0), /* SCU6 */ - [MSTP524] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 24, 0), /* SCU7 */ - [MSTP523] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 23, 0), /* SCU8 */ - [MSTP331] = SH_CLK_MSTP32(&s4_clk, MSTPCR3, 31, 0), /* MMC */ - [MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */ - [MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */ - [MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */ - [MSTP311] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 11, 0), /* SSI4 */ - [MSTP310] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 10, 0), /* SSI5 */ - [MSTP309] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 9, 0), /* SSI6 */ - [MSTP308] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 8, 0), /* SSI7 */ - [MSTP307] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 7, 0), /* SSI8 */ - [MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */ - [MSTP110] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 10, 0), /* VIN0 */ - [MSTP109] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 9, 0), /* VIN1 */ - [MSTP100] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 0, 0), /* USB0/1 */ - [MSTP030] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 30, 0), /* I2C0 */ - [MSTP029] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 29, 0), /* I2C1 */ - [MSTP028] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 28, 0), /* I2C2 */ - [MSTP027] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 27, 0), /* I2C3 */ - [MSTP026] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 26, 0), /* SCIF0 */ - [MSTP025] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 25, 0), /* SCIF1 */ - [MSTP024] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 24, 0), /* SCIF2 */ - [MSTP023] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 23, 0), /* SCIF3 */ - [MSTP022] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 22, 0), /* SCIF4 */ - [MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */ - [MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */ - [MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */ - [MSTP012] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 12, 0), /* SSI0 */ - [MSTP011] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 11, 0), /* SSI1 */ - [MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */ - [MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 9, 0), /* SSI3 */ - [MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 8, 0), /* SRU */ - [MSTP007] = SH_CLK_MSTP32(&s_clk, MSTPCR0, 7, 0), /* HSPI */ -}; - -static struct clk_lookup lookups[] = { - /* main */ - CLKDEV_CON_ID("shyway_clk", &s_clk), - CLKDEV_CON_ID("peripheral_clk", &p_clk), - - /* MSTP32 clocks */ - CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP331]), /* MMC */ - CLKDEV_DEV_ID("ffe4e000.mmc", &mstp_clks[MSTP331]), /* MMC */ - CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */ - CLKDEV_DEV_ID("ffe4c000.sd", &mstp_clks[MSTP323]), /* SDHI0 */ - CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */ - CLKDEV_DEV_ID("ffe4d000.sd", &mstp_clks[MSTP322]), /* SDHI1 */ - CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */ - CLKDEV_DEV_ID("ffe4f000.sd", &mstp_clks[MSTP321]), /* SDHI2 */ - CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */ - CLKDEV_DEV_ID("r8a7778-vin.0", &mstp_clks[MSTP110]), /* VIN0 */ - CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */ - CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */ - CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */ - CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */ - CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */ - CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */ - CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */ - CLKDEV_DEV_ID("ffc71000.i2c", &mstp_clks[MSTP029]), /* I2C1 */ - CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */ - CLKDEV_DEV_ID("ffc72000.i2c", &mstp_clks[MSTP028]), /* I2C2 */ - CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */ - CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */ - CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */ - CLKDEV_DEV_ID("ffe40000.serial", &mstp_clks[MSTP026]), /* SCIF0 */ - CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */ - CLKDEV_DEV_ID("ffe41000.serial", &mstp_clks[MSTP025]), /* SCIF1 */ - CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */ - CLKDEV_DEV_ID("ffe42000.serial", &mstp_clks[MSTP024]), /* SCIF2 */ - CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */ - CLKDEV_DEV_ID("ffe43000.serial", &mstp_clks[MSTP023]), /* SCIF3 */ - CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */ - CLKDEV_DEV_ID("ffe44000.serial", &mstp_clks[MSTP022]), /* SCIF4 */ - CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */ - CLKDEV_DEV_ID("ffe45000.serial", &mstp_clks[MSTP021]), /* SCIF5 */ - CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */ - CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */ - CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */ - CLKDEV_DEV_ID("fffc8000.spi", &mstp_clks[MSTP007]), /* HSPI1 */ - CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */ - CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */ - CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */ - - CLKDEV_ICK_ID("clk_a", "rcar_sound", &audio_clk_a), - CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b), - CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c), - CLKDEV_ICK_ID("clk_i", "rcar_sound", &s1_clk), - CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]), - CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]), - CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]), - CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP009]), - CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP311]), - CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP310]), - CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]), - CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]), - CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]), - CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP531]), - CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP530]), - CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP529]), - CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP528]), - CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP527]), - CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP526]), - CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP525]), - CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP524]), - CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP523]), - CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]), - CLKDEV_ICK_ID("fck", "ffd80000.timer", &mstp_clks[MSTP016]), - CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]), - CLKDEV_ICK_ID("fck", "ffd81000.timer", &mstp_clks[MSTP015]), -}; - -void __init r8a7778_clock_init(void) -{ - void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE); - u32 mode; - int k, ret = 0; - - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); - - switch (mode & (MD(19) | MD(18) | MD(12) | MD(11))) { - case MD(19): - extal_clk.rate = 38000000; - SH_CLK_SET_RATIO(&plla_clk_ratio, 21, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1); - break; - case MD(19) | MD(11): - extal_clk.rate = 33333333; - SH_CLK_SET_RATIO(&plla_clk_ratio, 24, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 24, 1); - break; - case MD(19) | MD(12): - extal_clk.rate = 28500000; - SH_CLK_SET_RATIO(&plla_clk_ratio, 28, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 28, 1); - break; - case MD(19) | MD(12) | MD(11): - extal_clk.rate = 25000000; - SH_CLK_SET_RATIO(&plla_clk_ratio, 32, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 32, 1); - break; - case MD(19) | MD(18) | MD(11): - extal_clk.rate = 33333333; - SH_CLK_SET_RATIO(&plla_clk_ratio, 24, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1); - break; - case MD(19) | MD(18) | MD(12): - extal_clk.rate = 28500000; - SH_CLK_SET_RATIO(&plla_clk_ratio, 28, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1); - break; - case MD(19) | MD(18) | MD(12) | MD(11): - extal_clk.rate = 25000000; - SH_CLK_SET_RATIO(&plla_clk_ratio, 32, 1); - SH_CLK_SET_RATIO(&pllb_clk_ratio, 24, 1); - break; - default: - BUG(); - } - - if (mode & MD(1)) { - SH_CLK_SET_RATIO(&i_clk_ratio, 1, 1); - SH_CLK_SET_RATIO(&s_clk_ratio, 1, 3); - SH_CLK_SET_RATIO(&s1_clk_ratio, 1, 6); - SH_CLK_SET_RATIO(&s3_clk_ratio, 1, 4); - SH_CLK_SET_RATIO(&s4_clk_ratio, 1, 8); - SH_CLK_SET_RATIO(&p_clk_ratio, 1, 12); - SH_CLK_SET_RATIO(&g_clk_ratio, 1, 12); - if (mode & MD(2)) { - SH_CLK_SET_RATIO(&b_clk_ratio, 1, 18); - SH_CLK_SET_RATIO(&out_clk_ratio, 1, 18); - } else { - SH_CLK_SET_RATIO(&b_clk_ratio, 1, 12); - SH_CLK_SET_RATIO(&out_clk_ratio, 1, 12); - } - } else { - SH_CLK_SET_RATIO(&i_clk_ratio, 1, 1); - SH_CLK_SET_RATIO(&s_clk_ratio, 1, 4); - SH_CLK_SET_RATIO(&s1_clk_ratio, 1, 8); - SH_CLK_SET_RATIO(&s3_clk_ratio, 1, 4); - SH_CLK_SET_RATIO(&s4_clk_ratio, 1, 8); - SH_CLK_SET_RATIO(&p_clk_ratio, 1, 16); - SH_CLK_SET_RATIO(&g_clk_ratio, 1, 12); - if (mode & MD(2)) { - SH_CLK_SET_RATIO(&b_clk_ratio, 1, 16); - SH_CLK_SET_RATIO(&out_clk_ratio, 1, 16); - } else { - SH_CLK_SET_RATIO(&b_clk_ratio, 1, 12); - SH_CLK_SET_RATIO(&out_clk_ratio, 1, 12); - } - } - - for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) - ret = clk_register(main_clks[k]); - - if (!ret) - ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - if (!ret) - shmobile_clk_init(); - else - panic("failed to setup r8a7778 clocks\n"); -} diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c deleted file mode 100644 index 68c2d06d0eaa..000000000000 --- a/arch/arm/mach-shmobile/clock.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * SH-Mobile Clock Framework - * - * Copyright (C) 2010 Magnus Damm - * - * Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/export.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/sh_clk.h> - -#include "clock.h" -#include "common.h" - -unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk) -{ - struct clk_ratio *p = clk->priv; - - return clk->parent->rate / p->div * p->mul; -}; - -struct sh_clk_ops shmobile_fixed_ratio_clk_ops = { - .recalc = shmobile_fixed_ratio_clk_recalc, -}; - -int __init shmobile_clk_init(void) -{ - /* Kick the child clocks.. */ - recalculate_root_clocks(); - - /* Enable the necessary init clocks */ - clk_enable_init_clocks(); - - return 0; -} diff --git a/arch/arm/mach-shmobile/clock.h b/arch/arm/mach-shmobile/clock.h deleted file mode 100644 index cf3552ea1019..000000000000 --- a/arch/arm/mach-shmobile/clock.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef CLOCK_H -#define CLOCK_H - -/* legacy clock implementation */ - -struct clk; -unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk); -extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops; - -/* clock ratio */ -struct clk_ratio { - int mul; - int div; -}; - -#define SH_CLK_RATIO(name, m, d) \ -static struct clk_ratio name ##_ratio = { \ - .mul = m, \ - .div = d, \ -} - -#define SH_FIXED_RATIO_CLKg(name, p, r) \ -struct clk name = { \ - .parent = &p, \ - .ops = &shmobile_fixed_ratio_clk_ops,\ - .priv = &r ## _ratio, \ -} - -#define SH_FIXED_RATIO_CLK(name, p, r) \ -static SH_FIXED_RATIO_CLKg(name, p, r) - -#define SH_FIXED_RATIO_CLK_SET(name, p, m, d) \ - SH_CLK_RATIO(name, m, d); \ - SH_FIXED_RATIO_CLK(name, p, name) - -#define SH_CLK_SET_RATIO(p, m, d) \ -do { \ - (p)->mul = m; \ - (p)->div = d; \ -} while (0) - -#endif diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index 8d27ec546a35..9cb11215ceba 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -1,10 +1,7 @@ #ifndef __ARCH_MACH_COMMON_H #define __ARCH_MACH_COMMON_H -extern void shmobile_earlytimer_init(void); extern void shmobile_init_delay(void); -struct twd_local_timer; -extern void shmobile_setup_console(void); extern void shmobile_boot_vector(void); extern unsigned long shmobile_boot_fn; extern unsigned long shmobile_boot_arg; @@ -18,8 +15,6 @@ extern void shmobile_boot_scu(void); extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus); extern void shmobile_smp_scu_cpu_die(unsigned int cpu); extern int shmobile_smp_scu_cpu_kill(unsigned int cpu); -struct clk; -extern int shmobile_clk_init(void); extern struct platform_suspend_ops shmobile_suspend_ops; #ifdef CONFIG_SUSPEND diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c deleted file mode 100644 index e329ccbd0a67..000000000000 --- a/arch/arm/mach-shmobile/console.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * SH-Mobile Console - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <asm/mach/map.h> -#include "common.h" - -void __init shmobile_setup_console(void) -{ - parse_early_param(); - - /* Let earlyprintk output early console messages */ - early_platform_driver_probe("earlyprintk", 1, 1); -} diff --git a/arch/arm/mach-shmobile/intc.h b/arch/arm/mach-shmobile/intc.h deleted file mode 100644 index 40b2ad4ca5b4..000000000000 --- a/arch/arm/mach-shmobile/intc.h +++ /dev/null @@ -1,295 +0,0 @@ -#ifndef __ASM_MACH_INTC_H -#define __ASM_MACH_INTC_H -#include <linux/sh_intc.h> - -#define INTC_IRQ_PINS_ENUM_16L(p) \ - p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ - p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7, \ - p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ - p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 - -#define INTC_IRQ_PINS_ENUM_16H(p) \ - p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ - p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23, \ - p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ - p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 - -#define INTC_IRQ_PINS_VECT_16L(p, vect) \ - vect(p ## _IRQ0, 0x0200), vect(p ## _IRQ1, 0x0220), \ - vect(p ## _IRQ2, 0x0240), vect(p ## _IRQ3, 0x0260), \ - vect(p ## _IRQ4, 0x0280), vect(p ## _IRQ5, 0x02a0), \ - vect(p ## _IRQ6, 0x02c0), vect(p ## _IRQ7, 0x02e0), \ - vect(p ## _IRQ8, 0x0300), vect(p ## _IRQ9, 0x0320), \ - vect(p ## _IRQ10, 0x0340), vect(p ## _IRQ11, 0x0360), \ - vect(p ## _IRQ12, 0x0380), vect(p ## _IRQ13, 0x03a0), \ - vect(p ## _IRQ14, 0x03c0), vect(p ## _IRQ15, 0x03e0) - -#define INTC_IRQ_PINS_VECT_16H(p, vect) \ - vect(p ## _IRQ16, 0x3200), vect(p ## _IRQ17, 0x3220), \ - vect(p ## _IRQ18, 0x3240), vect(p ## _IRQ19, 0x3260), \ - vect(p ## _IRQ20, 0x3280), vect(p ## _IRQ21, 0x32a0), \ - vect(p ## _IRQ22, 0x32c0), vect(p ## _IRQ23, 0x32e0), \ - vect(p ## _IRQ24, 0x3300), vect(p ## _IRQ25, 0x3320), \ - vect(p ## _IRQ26, 0x3340), vect(p ## _IRQ27, 0x3360), \ - vect(p ## _IRQ28, 0x3380), vect(p ## _IRQ29, 0x33a0), \ - vect(p ## _IRQ30, 0x33c0), vect(p ## _IRQ31, 0x33e0) - -#define INTC_IRQ_PINS_MASK_16L(p, base) \ - { base + 0x40, base + 0x60, 8, /* INTMSK00A / INTMSKCLR00A */ \ - { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ - p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \ - { base + 0x44, base + 0x64, 8, /* INTMSK10A / INTMSKCLR10A */ \ - { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ - p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } } - -#define INTC_IRQ_PINS_MASK_16H(p, base) \ - { base + 0x48, base + 0x68, 8, /* INTMSK20A / INTMSKCLR20A */ \ - { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ - p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \ - { base + 0x4c, base + 0x6c, 8, /* INTMSK30A / INTMSKCLR30A */ \ - { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ - p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } } - -#define INTC_IRQ_PINS_PRIO_16L(p, base) \ - { base + 0x10, 0, 32, 4, /* INTPRI00A */ \ - { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ - p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \ - { base + 0x14, 0, 32, 4, /* INTPRI10A */ \ - { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ - p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } } - -#define INTC_IRQ_PINS_PRIO_16H(p, base) \ - { base + 0x18, 0, 32, 4, /* INTPRI20A */ \ - { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ - p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \ - { base + 0x1c, 0, 32, 4, /* INTPRI30A */ \ - { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ - p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } } - -#define INTC_IRQ_PINS_SENSE_16L(p, base) \ - { base + 0x00, 32, 4, /* ICR1A */ \ - { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ - p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \ - { base + 0x04, 32, 4, /* ICR2A */ \ - { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ - p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } } - -#define INTC_IRQ_PINS_SENSE_16H(p, base) \ - { base + 0x08, 32, 4, /* ICR3A */ \ - { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ - p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \ - { base + 0x0c, 32, 4, /* ICR4A */ \ - { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ - p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } } - -#define INTC_IRQ_PINS_ACK_16L(p, base) \ - { base + 0x20, 0, 8, /* INTREQ00A */ \ - { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \ - p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \ - { base + 0x24, 0, 8, /* INTREQ10A */ \ - { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \ - p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } } - -#define INTC_IRQ_PINS_ACK_16H(p, base) \ - { base + 0x28, 0, 8, /* INTREQ20A */ \ - { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \ - p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \ - { base + 0x2c, 0, 8, /* INTREQ30A */ \ - { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \ - p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } } - -#define INTC_IRQ_PINS_16(p, base, vect, str) \ - \ -static struct resource p ## _resources[] __initdata = { \ - [0] = { \ - .start = base, \ - .end = base + 0x64, \ - .flags = IORESOURCE_MEM, \ - }, \ -}; \ - \ -enum { \ - p ## _UNUSED = 0, \ - INTC_IRQ_PINS_ENUM_16L(p), \ -}; \ - \ -static struct intc_vect p ## _vectors[] __initdata = { \ - INTC_IRQ_PINS_VECT_16L(p, vect), \ -}; \ - \ -static struct intc_mask_reg p ## _mask_registers[] __initdata = { \ - INTC_IRQ_PINS_MASK_16L(p, base), \ -}; \ - \ -static struct intc_prio_reg p ## _prio_registers[] __initdata = { \ - INTC_IRQ_PINS_PRIO_16L(p, base), \ -}; \ - \ -static struct intc_sense_reg p ## _sense_registers[] __initdata = { \ - INTC_IRQ_PINS_SENSE_16L(p, base), \ -}; \ - \ -static struct intc_mask_reg p ## _ack_registers[] __initdata = { \ - INTC_IRQ_PINS_ACK_16L(p, base), \ -}; \ - \ -static struct intc_desc p ## _desc __initdata = { \ - .name = str, \ - .resource = p ## _resources, \ - .num_resources = ARRAY_SIZE(p ## _resources), \ - .hw = INTC_HW_DESC(p ## _vectors, NULL, \ - p ## _mask_registers, p ## _prio_registers, \ - p ## _sense_registers, p ## _ack_registers) \ -} - -#define INTC_IRQ_PINS_16H(p, base, vect, str) \ - \ -static struct resource p ## _resources[] __initdata = { \ - [0] = { \ - .start = base, \ - .end = base + 0x64, \ - .flags = IORESOURCE_MEM, \ - }, \ -}; \ - \ -enum { \ - p ## _UNUSED = 0, \ - INTC_IRQ_PINS_ENUM_16H(p), \ -}; \ - \ -static struct intc_vect p ## _vectors[] __initdata = { \ - INTC_IRQ_PINS_VECT_16H(p, vect), \ -}; \ - \ -static struct intc_mask_reg p ## _mask_registers[] __initdata = { \ - INTC_IRQ_PINS_MASK_16H(p, base), \ -}; \ - \ -static struct intc_prio_reg p ## _prio_registers[] __initdata = { \ - INTC_IRQ_PINS_PRIO_16H(p, base), \ -}; \ - \ -static struct intc_sense_reg p ## _sense_registers[] __initdata = { \ - INTC_IRQ_PINS_SENSE_16H(p, base), \ -}; \ - \ -static struct intc_mask_reg p ## _ack_registers[] __initdata = { \ - INTC_IRQ_PINS_ACK_16H(p, base), \ -}; \ - \ -static struct intc_desc p ## _desc __initdata = { \ - .name = str, \ - .resource = p ## _resources, \ - .num_resources = ARRAY_SIZE(p ## _resources), \ - .hw = INTC_HW_DESC(p ## _vectors, NULL, \ - p ## _mask_registers, p ## _prio_registers, \ - p ## _sense_registers, p ## _ack_registers) \ -} - -#define INTC_IRQ_PINS_32(p, base, vect, str) \ - \ -static struct resource p ## _resources[] __initdata = { \ - [0] = { \ - .start = base, \ - .end = base + 0x6c, \ - .flags = IORESOURCE_MEM, \ - }, \ -}; \ - \ -enum { \ - p ## _UNUSED = 0, \ - INTC_IRQ_PINS_ENUM_16L(p), \ - INTC_IRQ_PINS_ENUM_16H(p), \ -}; \ - \ -static struct intc_vect p ## _vectors[] __initdata = { \ - INTC_IRQ_PINS_VECT_16L(p, vect), \ - INTC_IRQ_PINS_VECT_16H(p, vect), \ -}; \ - \ -static struct intc_mask_reg p ## _mask_registers[] __initdata = { \ - INTC_IRQ_PINS_MASK_16L(p, base), \ - INTC_IRQ_PINS_MASK_16H(p, base), \ -}; \ - \ -static struct intc_prio_reg p ## _prio_registers[] __initdata = { \ - INTC_IRQ_PINS_PRIO_16L(p, base), \ - INTC_IRQ_PINS_PRIO_16H(p, base), \ -}; \ - \ -static struct intc_sense_reg p ## _sense_registers[] __initdata = { \ - INTC_IRQ_PINS_SENSE_16L(p, base), \ - INTC_IRQ_PINS_SENSE_16H(p, base), \ -}; \ - \ -static struct intc_mask_reg p ## _ack_registers[] __initdata = { \ - INTC_IRQ_PINS_ACK_16L(p, base), \ - INTC_IRQ_PINS_ACK_16H(p, base), \ -}; \ - \ -static struct intc_desc p ## _desc __initdata = { \ - .name = str, \ - .resource = p ## _resources, \ - .num_resources = ARRAY_SIZE(p ## _resources), \ - .hw = INTC_HW_DESC(p ## _vectors, NULL, \ - p ## _mask_registers, p ## _prio_registers, \ - p ## _sense_registers, p ## _ack_registers) \ -} - -#define INTC_PINT_E_EMPTY -#define INTC_PINT_E_NONE 0, 0, 0, 0, 0, 0, 0, 0, -#define INTC_PINT_E(p) \ - PINT ## p ## 0, PINT ## p ## 1, PINT ## p ## 2, PINT ## p ## 3, \ - PINT ## p ## 4, PINT ## p ## 5, PINT ## p ## 6, PINT ## p ## 7, - -#define INTC_PINT_V_NONE -#define INTC_PINT_V(p, vect) \ - vect(PINT ## p ## 0, 0), vect(PINT ## p ## 1, 1), \ - vect(PINT ## p ## 2, 2), vect(PINT ## p ## 3, 3), \ - vect(PINT ## p ## 4, 4), vect(PINT ## p ## 5, 5), \ - vect(PINT ## p ## 6, 6), vect(PINT ## p ## 7, 7), - -#define INTC_PINT(p, mask_reg, sense_base, str, \ - enums_1, enums_2, enums_3, enums_4, \ - vect_1, vect_2, vect_3, vect_4, \ - mask_a, mask_b, mask_c, mask_d, \ - sense_a, sense_b, sense_c, sense_d) \ - \ -enum { \ - PINT ## p ## _UNUSED = 0, \ - enums_1 enums_2 enums_3 enums_4 \ -}; \ - \ -static struct intc_vect p ## _vectors[] __initdata = { \ - vect_1 vect_2 vect_3 vect_4 \ -}; \ - \ -static struct intc_mask_reg p ## _mask_registers[] __initdata = { \ - { mask_reg, 0, 32, /* PINTER */ \ - { mask_a mask_b mask_c mask_d } } \ -}; \ - \ -static struct intc_sense_reg p ## _sense_registers[] __initdata = { \ - { sense_base + 0x00, 16, 2, /* PINTCR */ \ - { sense_a } }, \ - { sense_base + 0x04, 16, 2, /* PINTCR */ \ - { sense_b } }, \ - { sense_base + 0x08, 16, 2, /* PINTCR */ \ - { sense_c } }, \ - { sense_base + 0x0c, 16, 2, /* PINTCR */ \ - { sense_d } }, \ -}; \ - \ -static struct intc_desc p ## _desc __initdata = { \ - .name = str, \ - .hw = INTC_HW_DESC(p ## _vectors, NULL, \ - p ## _mask_registers, NULL, \ - p ## _sense_registers, NULL), \ -} - -/* INTCS */ -#define INTCS_VECT_BASE 0x3400 -#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect)) -#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt)) - -#endif /* __ASM_MACH_INTC_H */ diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c index 4e54512bee30..911884f7e28b 100644 --- a/arch/arm/mach-shmobile/platsmp-apmu.c +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -88,7 +88,7 @@ static void apmu_init_cpu(struct resource *res, int cpu, int bit) static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit), struct rcar_apmu_config *apmu_config, int num) { - u32 id; + int id; int k; int bit, index; bool is_allowed; @@ -170,7 +170,7 @@ static inline void cpu_enter_lowpower_a15(void) dsb(); } -void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu) +static void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu) { /* Select next sleep mode using the APMU */ diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c index 47a862e7f8ba..14c42a1bdf1e 100644 --- a/arch/arm/mach-shmobile/pm-r8a7779.c +++ b/arch/arm/mach-shmobile/pm-r8a7779.c @@ -9,20 +9,8 @@ * for more details. */ -#include <linux/pm.h> -#include <linux/suspend.h> -#include <linux/err.h> -#include <linux/pm_clock.h> -#include <linux/pm_domain.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/console.h> - #include <asm/io.h> -#include "common.h" #include "pm-rcar.h" #include "r8a7779.h" @@ -30,17 +18,6 @@ #define SYSCIER 0x0c #define SYSCIMR 0x10 -struct r8a7779_pm_domain { - struct generic_pm_domain genpd; - struct rcar_sysc_ch ch; -}; - -static inline -const struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d) -{ - return &container_of(d, struct r8a7779_pm_domain, genpd)->ch; -} - #if defined(CONFIG_PM) || defined(CONFIG_SMP) static void __init r8a7779_sysc_init(void) @@ -58,82 +35,6 @@ static inline void r8a7779_sysc_init(void) {} #endif /* CONFIG_PM || CONFIG_SMP */ -#ifdef CONFIG_PM - -static int pd_power_down(struct generic_pm_domain *genpd) -{ - return rcar_sysc_power_down(to_r8a7779_ch(genpd)); -} - -static int pd_power_up(struct generic_pm_domain *genpd) -{ - return rcar_sysc_power_up(to_r8a7779_ch(genpd)); -} - -static bool pd_is_off(struct generic_pm_domain *genpd) -{ - return rcar_sysc_power_is_off(to_r8a7779_ch(genpd)); -} - -static bool pd_active_wakeup(struct device *dev) -{ - return true; -} - -static void r8a7779_init_pm_domain(struct r8a7779_pm_domain *r8a7779_pd) -{ - struct generic_pm_domain *genpd = &r8a7779_pd->genpd; - - pm_genpd_init(genpd, NULL, false); - genpd->dev_ops.active_wakeup = pd_active_wakeup; - genpd->power_off = pd_power_down; - genpd->power_on = pd_power_up; - - if (pd_is_off(&r8a7779_pd->genpd)) - pd_power_up(&r8a7779_pd->genpd); -} - -static struct r8a7779_pm_domain r8a7779_pm_domains[] = { - { - .genpd.name = "SH4A", - .ch = { - .chan_offs = 0x80, /* PWRSR1 .. PWRER1 */ - .isr_bit = 16, /* SH4A */ - }, - }, - { - .genpd.name = "SGX", - .ch = { - .chan_offs = 0xc0, /* PWRSR2 .. PWRER2 */ - .isr_bit = 20, /* SGX */ - }, - }, - { - .genpd.name = "VDP1", - .ch = { - .chan_offs = 0x100, /* PWRSR3 .. PWRER3 */ - .isr_bit = 21, /* VDP */ - }, - }, - { - .genpd.name = "IMPX3", - .ch = { - .chan_offs = 0x140, /* PWRSR4 .. PWRER4 */ - .isr_bit = 24, /* IMP */ - }, - }, -}; - -void __init r8a7779_init_pm_domains(void) -{ - int j; - - for (j = 0; j < ARRAY_SIZE(r8a7779_pm_domains); j++) - r8a7779_init_pm_domain(&r8a7779_pm_domains[j]); -} - -#endif /* CONFIG_PM */ - void __init r8a7779_pm_init(void) { static int once; diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c index a5b96b990aea..46d0a1ddce75 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.c +++ b/arch/arm/mach-shmobile/pm-rmobile.c @@ -12,6 +12,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ +#include <linux/clk/shmobile.h> #include <linux/console.h> #include <linux/delay.h> #include <linux/of.h> @@ -124,36 +125,6 @@ static bool rmobile_pd_active_wakeup(struct device *dev) return true; } -static int rmobile_pd_attach_dev(struct generic_pm_domain *domain, - struct device *dev) -{ - int error; - - error = pm_clk_create(dev); - if (error) { - dev_err(dev, "pm_clk_create failed %d\n", error); - return error; - } - - error = pm_clk_add(dev, NULL); - if (error) { - dev_err(dev, "pm_clk_add failed %d\n", error); - goto fail; - } - - return 0; - -fail: - pm_clk_destroy(dev); - return error; -} - -static void rmobile_pd_detach_dev(struct generic_pm_domain *domain, - struct device *dev) -{ - pm_clk_destroy(dev); -} - static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd) { struct generic_pm_domain *genpd = &rmobile_pd->genpd; @@ -164,8 +135,8 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd) genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup; genpd->power_off = rmobile_pd_power_down; genpd->power_on = rmobile_pd_power_up; - genpd->attach_dev = rmobile_pd_attach_dev; - genpd->detach_dev = rmobile_pd_detach_dev; + genpd->attach_dev = cpg_mstp_attach_dev; + genpd->detach_dev = cpg_mstp_detach_dev; __rmobile_pd_power_up(rmobile_pd, false); } @@ -342,8 +313,10 @@ static int __init rmobile_add_pm_domains(void __iomem *base, } pd = kzalloc(sizeof(*pd), GFP_KERNEL); - if (!pd) + if (!pd) { + of_node_put(np); return -ENOMEM; + } pd->genpd.name = np->name; pd->base = base; diff --git a/arch/arm/mach-shmobile/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h index 30a4a421ee31..8146bb6d7237 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.h +++ b/arch/arm/mach-shmobile/pm-rmobile.h @@ -12,10 +12,6 @@ #include <linux/pm_domain.h> -#define DEFAULT_DEV_LATENCY_NS 250000 - -struct platform_device; - struct rmobile_pm_domain { struct generic_pm_domain genpd; struct dev_power_governor *gov; @@ -26,9 +22,4 @@ struct rmobile_pm_domain { bool no_debug; }; -struct pm_domain_device { - const char *domain_name; - struct platform_device *pdev; -}; - #endif /* PM_RMOBILE_H */ diff --git a/arch/arm/mach-shmobile/r8a7778.h b/arch/arm/mach-shmobile/r8a7778.h deleted file mode 100644 index f64fedb1f2cc..000000000000 --- a/arch/arm/mach-shmobile/r8a7778.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * Copyright (C) 2013 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __ASM_R8A7778_H__ -#define __ASM_R8A7778_H__ - -#include <linux/sh_eth.h> - -/* HPB-DMA slave IDs */ -enum { - HPBDMA_SLAVE_DUMMY, - HPBDMA_SLAVE_SDHI0_TX, - HPBDMA_SLAVE_SDHI0_RX, - HPBDMA_SLAVE_SSI0_TX, - HPBDMA_SLAVE_SSI0_RX, - HPBDMA_SLAVE_SSI1_TX, - HPBDMA_SLAVE_SSI1_RX, - HPBDMA_SLAVE_SSI2_TX, - HPBDMA_SLAVE_SSI2_RX, - HPBDMA_SLAVE_SSI3_TX, - HPBDMA_SLAVE_SSI3_RX, - HPBDMA_SLAVE_SSI4_TX, - HPBDMA_SLAVE_SSI4_RX, - HPBDMA_SLAVE_SSI5_TX, - HPBDMA_SLAVE_SSI5_RX, - HPBDMA_SLAVE_SSI6_TX, - HPBDMA_SLAVE_SSI6_RX, - HPBDMA_SLAVE_SSI7_TX, - HPBDMA_SLAVE_SSI7_RX, - HPBDMA_SLAVE_SSI8_TX, - HPBDMA_SLAVE_SSI8_RX, - HPBDMA_SLAVE_HPBIF0_TX, - HPBDMA_SLAVE_HPBIF0_RX, - HPBDMA_SLAVE_HPBIF1_TX, - HPBDMA_SLAVE_HPBIF1_RX, - HPBDMA_SLAVE_HPBIF2_TX, - HPBDMA_SLAVE_HPBIF2_RX, - HPBDMA_SLAVE_HPBIF3_TX, - HPBDMA_SLAVE_HPBIF3_RX, - HPBDMA_SLAVE_HPBIF4_TX, - HPBDMA_SLAVE_HPBIF4_RX, - HPBDMA_SLAVE_HPBIF5_TX, - HPBDMA_SLAVE_HPBIF5_RX, - HPBDMA_SLAVE_HPBIF6_TX, - HPBDMA_SLAVE_HPBIF6_RX, - HPBDMA_SLAVE_HPBIF7_TX, - HPBDMA_SLAVE_HPBIF7_RX, - HPBDMA_SLAVE_HPBIF8_TX, - HPBDMA_SLAVE_HPBIF8_RX, - HPBDMA_SLAVE_USBFUNC_TX, - HPBDMA_SLAVE_USBFUNC_RX, -}; - -extern void r8a7778_add_standard_devices(void); -extern void r8a7778_add_standard_devices_dt(void); -extern void r8a7778_add_dt_devices(void); - -extern void r8a7778_init_late(void); -extern void r8a7778_init_irq_dt(void); -extern void r8a7778_clock_init(void); -extern void r8a7778_init_irq_extpin(int irlm); -extern void r8a7778_init_irq_extpin_dt(int irlm); -extern void r8a7778_pinmux_init(void); - -extern int r8a7778_usb_phy_power(bool enable); - -#endif /* __ASM_R8A7778_H__ */ diff --git a/arch/arm/mach-shmobile/r8a7779.h b/arch/arm/mach-shmobile/r8a7779.h index db303f76704e..e1aaa2ef9376 100644 --- a/arch/arm/mach-shmobile/r8a7779.h +++ b/arch/arm/mach-shmobile/r8a7779.h @@ -1,16 +1,8 @@ #ifndef __ASM_R8A7779_H__ #define __ASM_R8A7779_H__ -#include <linux/sh_clk.h> - extern void r8a7779_pm_init(void); -#ifdef CONFIG_PM -extern void __init r8a7779_init_pm_domains(void); -#else -static inline void r8a7779_init_pm_domains(void) {} -#endif /* CONFIG_PM */ - extern struct smp_operations r8a7779_smp_ops; #endif /* __ASM_R8A7779_H__ */ diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index b9116c81e54b..0ab9d3272875 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -16,35 +16,16 @@ */ #include <linux/clk/shmobile.h> -#include <linux/kernel.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> -#include <linux/of.h> -#include <linux/of_platform.h> -#include <linux/platform_data/dma-rcar-hpbdma.h> -#include <linux/platform_data/gpio-rcar.h> -#include <linux/platform_data/irq-renesas-intc-irqpin.h> -#include <linux/platform_device.h> #include <linux/irqchip.h> -#include <linux/serial_sci.h> -#include <linux/sh_timer.h> -#include <linux/pm_runtime.h> -#include <linux/usb/phy.h> -#include <linux/usb/hcd.h> -#include <linux/usb/ehci_pdriver.h> -#include <linux/usb/ohci_pdriver.h> -#include <linux/dma-mapping.h> #include <asm/mach/arch.h> -#include <asm/hardware/cache-l2x0.h> #include "common.h" #include "irqs.h" -#include "r8a7778.h" #define MODEMR 0xffcc0020 -#ifdef CONFIG_COMMON_CLK static void __init r8a7778_timer_init(void) { u32 mode; @@ -55,555 +36,21 @@ static void __init r8a7778_timer_init(void) iounmap(modemr); r8a7778_clocks_init(mode); } -#endif -/* SCIF */ -#define R8A7778_SCIF(index, baseaddr, irq) \ -static struct plat_sci_port scif##index##_platform_data = { \ - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, \ - .type = PORT_SCIF, \ -}; \ - \ -static struct resource scif##index##_resources[] = { \ - DEFINE_RES_MEM(baseaddr, 0x100), \ - DEFINE_RES_IRQ(irq), \ -} - -R8A7778_SCIF(0, 0xffe40000, gic_iid(0x66)); -R8A7778_SCIF(1, 0xffe41000, gic_iid(0x67)); -R8A7778_SCIF(2, 0xffe42000, gic_iid(0x68)); -R8A7778_SCIF(3, 0xffe43000, gic_iid(0x69)); -R8A7778_SCIF(4, 0xffe44000, gic_iid(0x6a)); -R8A7778_SCIF(5, 0xffe45000, gic_iid(0x6b)); - -#define r8a7778_register_scif(index) \ - platform_device_register_resndata(NULL, "sh-sci", index, \ - scif##index##_resources, \ - ARRAY_SIZE(scif##index##_resources), \ - &scif##index##_platform_data, \ - sizeof(scif##index##_platform_data)) - -/* TMU */ -static struct sh_timer_config sh_tmu0_platform_data = { - .channels_mask = 7, -}; - -static struct resource sh_tmu0_resources[] = { - DEFINE_RES_MEM(0xffd80000, 0x30), - DEFINE_RES_IRQ(gic_iid(0x40)), - DEFINE_RES_IRQ(gic_iid(0x41)), - DEFINE_RES_IRQ(gic_iid(0x42)), -}; - -#define r8a7778_register_tmu(idx) \ - platform_device_register_resndata( \ - NULL, "sh-tmu", idx, \ - sh_tmu##idx##_resources, \ - ARRAY_SIZE(sh_tmu##idx##_resources), \ - &sh_tmu##idx##_platform_data, \ - sizeof(sh_tmu##idx##_platform_data)) - -int r8a7778_usb_phy_power(bool enable) -{ - static struct usb_phy *phy = NULL; - int ret = 0; - - if (!phy) - phy = usb_get_phy(USB_PHY_TYPE_USB2); - - if (IS_ERR(phy)) { - pr_err("kernel doesn't have usb phy driver\n"); - return PTR_ERR(phy); - } - - if (enable) - ret = usb_phy_init(phy); - else - usb_phy_shutdown(phy); - - return ret; -} - -/* USB */ -static int usb_power_on(struct platform_device *pdev) -{ - int ret = r8a7778_usb_phy_power(true); - - if (ret) - return ret; - - pm_runtime_enable(&pdev->dev); - pm_runtime_get_sync(&pdev->dev); - - return 0; -} - -static void usb_power_off(struct platform_device *pdev) -{ - if (r8a7778_usb_phy_power(false)) - return; - - pm_runtime_put_sync(&pdev->dev); - pm_runtime_disable(&pdev->dev); -} - -static int ehci_init_internal_buffer(struct usb_hcd *hcd) -{ - /* - * Below are recommended values from the datasheet; - * see [USB :: Setting of EHCI Internal Buffer]. - */ - /* EHCI IP internal buffer setting */ - iowrite32(0x00ff0040, hcd->regs + 0x0094); - /* EHCI IP internal buffer enable */ - iowrite32(0x00000001, hcd->regs + 0x009C); - - return 0; -} - -static struct usb_ehci_pdata ehci_pdata __initdata = { - .power_on = usb_power_on, - .power_off = usb_power_off, - .power_suspend = usb_power_off, - .pre_setup = ehci_init_internal_buffer, -}; - -static struct resource ehci_resources[] __initdata = { - DEFINE_RES_MEM(0xffe70000, 0x400), - DEFINE_RES_IRQ(gic_iid(0x4c)), -}; - -static struct usb_ohci_pdata ohci_pdata __initdata = { - .power_on = usb_power_on, - .power_off = usb_power_off, - .power_suspend = usb_power_off, -}; - -static struct resource ohci_resources[] __initdata = { - DEFINE_RES_MEM(0xffe70400, 0x400), - DEFINE_RES_IRQ(gic_iid(0x4c)), -}; - -#define USB_PLATFORM_INFO(hci) \ -static struct platform_device_info hci##_info __initdata = { \ - .name = #hci "-platform", \ - .id = -1, \ - .res = hci##_resources, \ - .num_res = ARRAY_SIZE(hci##_resources), \ - .data = &hci##_pdata, \ - .size_data = sizeof(hci##_pdata), \ - .dma_mask = DMA_BIT_MASK(32), \ -} - -USB_PLATFORM_INFO(ehci); -USB_PLATFORM_INFO(ohci); - -/* PFC/GPIO */ -static struct resource pfc_resources[] __initdata = { - DEFINE_RES_MEM(0xfffc0000, 0x118), -}; - -#define R8A7778_GPIO(idx) \ -static struct resource r8a7778_gpio##idx##_resources[] __initdata = { \ - DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30), \ - DEFINE_RES_IRQ(gic_iid(0x87)), \ -}; \ - \ -static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \ - .gpio_base = 32 * (idx), \ - .irq_base = GPIO_IRQ_BASE(idx), \ - .number_of_pins = 32, \ - .pctl_name = "pfc-r8a7778", \ -} - -R8A7778_GPIO(0); -R8A7778_GPIO(1); -R8A7778_GPIO(2); -R8A7778_GPIO(3); -R8A7778_GPIO(4); - -#define r8a7778_register_gpio(idx) \ - platform_device_register_resndata( \ - NULL, "gpio_rcar", idx, \ - r8a7778_gpio##idx##_resources, \ - ARRAY_SIZE(r8a7778_gpio##idx##_resources), \ - &r8a7778_gpio##idx##_platform_data, \ - sizeof(r8a7778_gpio##idx##_platform_data)) - -void __init r8a7778_pinmux_init(void) -{ - platform_device_register_simple( - "pfc-r8a7778", -1, - pfc_resources, - ARRAY_SIZE(pfc_resources)); - - r8a7778_register_gpio(0); - r8a7778_register_gpio(1); - r8a7778_register_gpio(2); - r8a7778_register_gpio(3); - r8a7778_register_gpio(4); -}; - -/* I2C */ -static struct resource i2c_resources[] __initdata = { - /* I2C0 */ - DEFINE_RES_MEM(0xffc70000, 0x1000), - DEFINE_RES_IRQ(gic_iid(0x63)), - /* I2C1 */ - DEFINE_RES_MEM(0xffc71000, 0x1000), - DEFINE_RES_IRQ(gic_iid(0x6e)), - /* I2C2 */ - DEFINE_RES_MEM(0xffc72000, 0x1000), - DEFINE_RES_IRQ(gic_iid(0x6c)), - /* I2C3 */ - DEFINE_RES_MEM(0xffc73000, 0x1000), - DEFINE_RES_IRQ(gic_iid(0x6d)), -}; - -static void __init r8a7778_register_i2c(int id) -{ - BUG_ON(id < 0 || id > 3); - - platform_device_register_simple( - "i2c-rcar", id, - i2c_resources + (2 * id), 2); -} - -/* HSPI */ -static struct resource hspi_resources[] __initdata = { - /* HSPI0 */ - DEFINE_RES_MEM(0xfffc7000, 0x18), - DEFINE_RES_IRQ(gic_iid(0x5f)), - /* HSPI1 */ - DEFINE_RES_MEM(0xfffc8000, 0x18), - DEFINE_RES_IRQ(gic_iid(0x74)), - /* HSPI2 */ - DEFINE_RES_MEM(0xfffc6000, 0x18), - DEFINE_RES_IRQ(gic_iid(0x75)), -}; - -static void __init r8a7778_register_hspi(int id) -{ - BUG_ON(id < 0 || id > 2); - - platform_device_register_simple( - "sh-hspi", id, - hspi_resources + (2 * id), 2); -} - -void __init r8a7778_add_dt_devices(void) -{ -#ifdef CONFIG_CACHE_L2X0 - void __iomem *base = ioremap_nocache(0xf0100000, 0x1000); - if (base) { - /* - * Shared attribute override enable, 64K*16way - * don't call iounmap(base) - */ - l2x0_init(base, 0x00400000, 0xc20f0fff); - } -#endif -} - -/* HPB-DMA */ - -/* Asynchronous mode register (ASYNCMDR) bits */ -#define HPB_DMAE_ASYNCMDR_ASMD22_MASK BIT(2) /* SDHI0 */ -#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE BIT(2) /* SDHI0 */ -#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI 0 /* SDHI0 */ -#define HPB_DMAE_ASYNCMDR_ASMD21_MASK BIT(1) /* SDHI0 */ -#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE BIT(1) /* SDHI0 */ -#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI 0 /* SDHI0 */ - -#define HPBDMA_SSI(_id) \ -{ \ - .id = HPBDMA_SLAVE_SSI## _id ##_TX, \ - .addr = 0xffd91008 + (_id * 0x40), \ - .dcr = HPB_DMAE_DCR_CT | \ - HPB_DMAE_DCR_DIP | \ - HPB_DMAE_DCR_SPDS_32BIT | \ - HPB_DMAE_DCR_DMDL | \ - HPB_DMAE_DCR_DPDS_32BIT, \ - .port = _id + (_id << 8), \ - .dma_ch = (28 + _id), \ -}, { \ - .id = HPBDMA_SLAVE_SSI## _id ##_RX, \ - .addr = 0xffd9100c + (_id * 0x40), \ - .dcr = HPB_DMAE_DCR_CT | \ - HPB_DMAE_DCR_DIP | \ - HPB_DMAE_DCR_SMDL | \ - HPB_DMAE_DCR_SPDS_32BIT | \ - HPB_DMAE_DCR_DPDS_32BIT, \ - .port = _id + (_id << 8), \ - .dma_ch = (28 + _id), \ -} - -#define HPBDMA_HPBIF(_id) \ -{ \ - .id = HPBDMA_SLAVE_HPBIF## _id ##_TX, \ - .addr = 0xffda0000 + (_id * 0x1000), \ - .dcr = HPB_DMAE_DCR_CT | \ - HPB_DMAE_DCR_DIP | \ - HPB_DMAE_DCR_SPDS_32BIT | \ - HPB_DMAE_DCR_DMDL | \ - HPB_DMAE_DCR_DPDS_32BIT, \ - .port = 0x1111, \ - .dma_ch = (28 + _id), \ -}, { \ - .id = HPBDMA_SLAVE_HPBIF## _id ##_RX, \ - .addr = 0xffda0000 + (_id * 0x1000), \ - .dcr = HPB_DMAE_DCR_CT | \ - HPB_DMAE_DCR_DIP | \ - HPB_DMAE_DCR_SMDL | \ - HPB_DMAE_DCR_SPDS_32BIT | \ - HPB_DMAE_DCR_DPDS_32BIT, \ - .port = 0x1111, \ - .dma_ch = (28 + _id), \ -} - -static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = { - { - .id = HPBDMA_SLAVE_SDHI0_TX, - .addr = 0xffe4c000 + 0x30, - .dcr = HPB_DMAE_DCR_SPDS_16BIT | - HPB_DMAE_DCR_DMDL | - HPB_DMAE_DCR_DPDS_16BIT, - .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 | - HPB_DMAE_ASYNCRSTR_ASRST22 | - HPB_DMAE_ASYNCRSTR_ASRST23, - .mdr = HPB_DMAE_ASYNCMDR_ASMD21_MULTI, - .mdm = HPB_DMAE_ASYNCMDR_ASMD21_MASK, - .port = 0x0D0C, - .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE, - .dma_ch = 21, - }, { - .id = HPBDMA_SLAVE_SDHI0_RX, - .addr = 0xffe4c000 + 0x30, - .dcr = HPB_DMAE_DCR_SMDL | - HPB_DMAE_DCR_SPDS_16BIT | - HPB_DMAE_DCR_DPDS_16BIT, - .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 | - HPB_DMAE_ASYNCRSTR_ASRST22 | - HPB_DMAE_ASYNCRSTR_ASRST23, - .mdr = HPB_DMAE_ASYNCMDR_ASMD22_MULTI, - .mdm = HPB_DMAE_ASYNCMDR_ASMD22_MASK, - .port = 0x0D0C, - .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE, - .dma_ch = 22, - }, { - .id = HPBDMA_SLAVE_USBFUNC_TX, /* for D0 */ - .addr = 0xffe60018, - .dcr = HPB_DMAE_DCR_SPDS_32BIT | - HPB_DMAE_DCR_DMDL | - HPB_DMAE_DCR_DPDS_32BIT, - .port = 0x0000, - .dma_ch = 14, - }, { - .id = HPBDMA_SLAVE_USBFUNC_RX, /* for D1 */ - .addr = 0xffe6001c, - .dcr = HPB_DMAE_DCR_SMDL | - HPB_DMAE_DCR_SPDS_32BIT | - HPB_DMAE_DCR_DPDS_32BIT, - .port = 0x0101, - .dma_ch = 15, - }, - - HPBDMA_SSI(0), - HPBDMA_SSI(1), - HPBDMA_SSI(2), - HPBDMA_SSI(3), - HPBDMA_SSI(4), - HPBDMA_SSI(5), - HPBDMA_SSI(6), - HPBDMA_SSI(7), - HPBDMA_SSI(8), - - HPBDMA_HPBIF(0), - HPBDMA_HPBIF(1), - HPBDMA_HPBIF(2), - HPBDMA_HPBIF(3), - HPBDMA_HPBIF(4), - HPBDMA_HPBIF(5), - HPBDMA_HPBIF(6), - HPBDMA_HPBIF(7), - HPBDMA_HPBIF(8), -}; - -static const struct hpb_dmae_channel hpb_dmae_channels[] = { - HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_TX), /* ch. 14 */ - HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_RX), /* ch. 15 */ - HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */ - HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_TX), /* ch. 28 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_RX), /* ch. 28 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_TX), /* ch. 28 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_RX), /* ch. 28 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_TX), /* ch. 29 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_RX), /* ch. 29 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_TX), /* ch. 29 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_RX), /* ch. 29 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_TX), /* ch. 30 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_RX), /* ch. 30 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_TX), /* ch. 30 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_RX), /* ch. 30 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_TX), /* ch. 31 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_RX), /* ch. 31 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_TX), /* ch. 31 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_RX), /* ch. 31 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_TX), /* ch. 32 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_RX), /* ch. 32 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_TX), /* ch. 32 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_RX), /* ch. 32 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_TX), /* ch. 33 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_RX), /* ch. 33 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_TX), /* ch. 33 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_RX), /* ch. 33 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_TX), /* ch. 34 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_RX), /* ch. 34 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_TX), /* ch. 34 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_RX), /* ch. 34 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_TX), /* ch. 35 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_RX), /* ch. 35 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_TX), /* ch. 35 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_RX), /* ch. 35 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_TX), /* ch. 36 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_RX), /* ch. 36 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_TX), /* ch. 36 */ - HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_RX), /* ch. 36 */ -}; - -static struct hpb_dmae_pdata dma_platform_data __initdata = { - .slaves = hpb_dmae_slaves, - .num_slaves = ARRAY_SIZE(hpb_dmae_slaves), - .channels = hpb_dmae_channels, - .num_channels = ARRAY_SIZE(hpb_dmae_channels), - .ts_shift = { - [XMIT_SZ_8BIT] = 0, - [XMIT_SZ_16BIT] = 1, - [XMIT_SZ_32BIT] = 2, - }, - .num_hw_channels = 39, -}; - -static struct resource hpb_dmae_resources[] __initdata = { - /* Channel registers */ - DEFINE_RES_MEM(0xffc08000, 0x1000), - /* Common registers */ - DEFINE_RES_MEM(0xffc09000, 0x170), - /* Asynchronous reset registers */ - DEFINE_RES_MEM(0xffc00300, 4), - /* Asynchronous mode registers */ - DEFINE_RES_MEM(0xffc00400, 4), - /* IRQ for DMA channels */ - DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ), -}; - -static void __init r8a7778_register_hpb_dmae(void) -{ - platform_device_register_resndata(NULL, "hpb-dma-engine", - -1, hpb_dmae_resources, - ARRAY_SIZE(hpb_dmae_resources), - &dma_platform_data, - sizeof(dma_platform_data)); -} - -void __init r8a7778_add_standard_devices(void) -{ - r8a7778_add_dt_devices(); - r8a7778_register_tmu(0); - r8a7778_register_scif(0); - r8a7778_register_scif(1); - r8a7778_register_scif(2); - r8a7778_register_scif(3); - r8a7778_register_scif(4); - r8a7778_register_scif(5); - r8a7778_register_i2c(0); - r8a7778_register_i2c(1); - r8a7778_register_i2c(2); - r8a7778_register_i2c(3); - r8a7778_register_hspi(0); - r8a7778_register_hspi(1); - r8a7778_register_hspi(2); - - r8a7778_register_hpb_dmae(); -} - -void __init r8a7778_init_late(void) -{ - shmobile_init_late(); - platform_device_register_full(&ehci_info); - platform_device_register_full(&ohci_info); -} - -static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = { - .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */ - .sense_bitfield_width = 2, -}; - -static struct resource irqpin_resources[] __initdata = { - DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */ - DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */ - DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */ - DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */ - DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */ - DEFINE_RES_IRQ(gic_iid(0x3b)), /* IRQ0 */ - DEFINE_RES_IRQ(gic_iid(0x3c)), /* IRQ1 */ - DEFINE_RES_IRQ(gic_iid(0x3d)), /* IRQ2 */ - DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */ -}; - -void __init r8a7778_init_irq_extpin_dt(int irlm) -{ - void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE); - unsigned long tmp; - - if (!icr0) { - pr_warn("r8a7778: unable to setup external irq pin mode\n"); - return; - } - - tmp = ioread32(icr0); - if (irlm) - tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */ - else - tmp &= ~(1 << 23); /* IRL mode - not supported */ - tmp |= (1 << 21); /* LVLMODE = 1 */ - iowrite32(tmp, icr0); - iounmap(icr0); -} - -void __init r8a7778_init_irq_extpin(int irlm) -{ - r8a7778_init_irq_extpin_dt(irlm); - if (irlm) - platform_device_register_resndata( - NULL, "renesas_intc_irqpin", -1, - irqpin_resources, ARRAY_SIZE(irqpin_resources), - &irqpin_platform_data, sizeof(irqpin_platform_data)); -} - -#ifdef CONFIG_USE_OF #define INT2SMSKCR0 0x82288 /* 0xfe782288 */ #define INT2SMSKCR1 0x8228c /* 0xfe78228c */ #define INT2NTSR0 0x00018 /* 0xfe700018 */ #define INT2NTSR1 0x0002c /* 0xfe70002c */ -void __init r8a7778_init_irq_dt(void) + +static void __init r8a7778_init_irq_dt(void) { void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000); -#ifdef CONFIG_ARCH_SHMOBILE_LEGACY - void __iomem *gic_dist_base = ioremap_nocache(0xfe438000, 0x1000); - void __iomem *gic_cpu_base = ioremap_nocache(0xfe430000, 0x1000); -#endif BUG_ON(!base); -#ifdef CONFIG_ARCH_SHMOBILE_LEGACY - gic_init(0, 29, gic_dist_base, gic_cpu_base); -#else irqchip_init(); -#endif + /* route all interrupts to ARM */ __raw_writel(0x73ffffff, base + INT2NTSR0); __raw_writel(0xffffffff, base + INT2NTSR1); @@ -624,10 +71,6 @@ DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)") .init_early = shmobile_init_delay, .init_irq = r8a7778_init_irq_dt, .init_late = shmobile_init_late, -#ifdef CONFIG_COMMON_CLK .init_time = r8a7778_timer_init, -#endif .dt_compat = r8a7778_compat_dt, MACHINE_END - -#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/sh-gpio.h b/arch/arm/mach-shmobile/sh-gpio.h deleted file mode 100644 index 2c4141413db9..000000000000 --- a/arch/arm/mach-shmobile/sh-gpio.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Generic GPIO API and pinmux table support - * - * Copyright (c) 2008 Magnus Damm - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/io.h> - -/* - * FIXME !! - * - * current gpio frame work doesn't have - * the method to control only pull up/down/free. - * this function should be replaced by correct gpio function - */ -static inline void __init gpio_direction_none(void __iomem * addr) -{ - __raw_writeb(0x00, addr); -} - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index f1d027aa7a81..c17d4d3881ff 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -77,24 +77,3 @@ void __init shmobile_init_delay(void) shmobile_setup_delay_hz(max_freq, 2, 4); } } - -static void __init shmobile_late_time_init(void) -{ - /* - * Make sure all compiled-in early timers register themselves. - * - * Run probe() for two "earlytimer" devices, these will be the - * clockevents and clocksource devices respectively. In the event - * that only a clockevents device is available, we -ENODEV on the - * clocksource and the jiffies clocksource is used transparently - * instead. No error handling is necessary here. - */ - early_platform_driver_register_all("earlytimer"); - early_platform_driver_probe("earlytimer", 2, 0); -} - -void __init shmobile_earlytimer_init(void) -{ - late_time_init = shmobile_late_time_init; -} - diff --git a/arch/arm/mach-spear/hotplug.c b/arch/arm/mach-spear/hotplug.c index d97749c642ce..12edd1cf8a12 100644 --- a/arch/arm/mach-spear/hotplug.c +++ b/arch/arm/mach-spear/hotplug.c @@ -80,7 +80,7 @@ static inline void spear13xx_do_lowpower(unsigned int cpu, int *spurious) * * Called with IRQs disabled */ -void __ref spear13xx_cpu_die(unsigned int cpu) +void spear13xx_cpu_die(unsigned int cpu) { int spurious = 0; diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 223c9e99380d..c2be98f38e73 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -26,10 +26,11 @@ static const char * const sunxi_board_dt_compat[] = { "allwinner,sun4i-a10", "allwinner,sun5i-a10s", "allwinner,sun5i-a13", + "allwinner,sun5i-r8", NULL, }; -DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") +DT_MACHINE_START(SUNXI_DT, "Allwinner sun4i/sun5i Families") .dt_compat = sunxi_board_dt_compat, .init_late = sunxi_dt_cpufreq_init, MACHINE_END diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index fbe74c6806f3..49d1110cff53 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -39,8 +39,8 @@ static struct platform_device wifi_rfkill_device = { static struct gpiod_lookup_table wifi_gpio_lookup = { .dev_id = "rfkill_gpio", .table = { - GPIO_LOOKUP_IDX("tegra-gpio", 25, NULL, 0, 0), - GPIO_LOOKUP_IDX("tegra-gpio", 85, NULL, 1, 0), + GPIO_LOOKUP("tegra-gpio", 25, "reset", 0), + GPIO_LOOKUP("tegra-gpio", 85, "shutdown", 0), { }, }, }; diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index 6fc71f1534b0..1b129899a277 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -37,7 +37,7 @@ int tegra_cpu_kill(unsigned cpu) * * Called with IRQs disabled */ -void __ref tegra_cpu_die(unsigned int cpu) +void tegra_cpu_die(unsigned int cpu) { if (!tegra_hotplug_shutdown) { WARN(1, "hotplug is not yet initialized\n"); diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile index 60bd2265f753..1233f9b610bc 100644 --- a/arch/arm/mach-uniphier/Makefile +++ b/arch/arm/mach-uniphier/Makefile @@ -1,2 +1,2 @@ obj-y := uniphier.o -obj-$(CONFIG_SMP) += platsmp.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-uniphier/headsmp.S b/arch/arm/mach-uniphier/headsmp.S new file mode 100644 index 000000000000..c819dff84546 --- /dev/null +++ b/arch/arm/mach-uniphier/headsmp.S @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/cp15.h> + +ENTRY(uniphier_smp_trampoline) +ARM_BE8(setend be) @ ensure we are in BE8 mode + mrc p15, 0, r0, c0, c0, 5 @ MPIDR (Multiprocessor Affinity Reg) + and r2, r0, #0x3 @ CPU ID + ldr r1, uniphier_smp_trampoline_jump + ldr r3, uniphier_smp_trampoline_poll_addr + mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register) + orr r0, r0, #CR_I @ Enable ICache + bic r0, r0, #(CR_C | CR_M) @ Disable MMU and Dcache + mcr p15, 0, r0, c1, c0, 0 + b 1f @ cache the following 5 instructions +0: wfe +1: ldr r0, [r3] + cmp r0, r2 + bxeq r1 @ branch to secondary_startup + b 0b + .globl uniphier_smp_trampoline_jump +uniphier_smp_trampoline_jump: + .word 0 @ set virt_to_phys(secondary_startup) + .globl uniphier_smp_trampoline_poll_addr +uniphier_smp_trampoline_poll_addr: + .word 0 @ set CPU ID to be kicked to this reg + .globl uniphier_smp_trampoline_end +uniphier_smp_trampoline_end: +ENDPROC(uniphier_smp_trampoline) diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c index 4b784f721135..f0577664611c 100644 --- a/arch/arm/mach-uniphier/platsmp.c +++ b/arch/arm/mach-uniphier/platsmp.c @@ -12,73 +12,198 @@ * GNU General Public License for more details. */ -#include <linux/sizes.h> -#include <linux/compiler.h> +#define pr_fmt(fmt) "uniphier: " fmt + #include <linux/init.h> #include <linux/io.h> -#include <linux/regmap.h> -#include <linux/mfd/syscon.h> +#include <linux/ioport.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/sizes.h> +#include <asm/cacheflush.h> +#include <asm/hardware/cache-uniphier.h> +#include <asm/pgtable.h> #include <asm/smp.h> #include <asm/smp_scu.h> -static struct regmap *sbcm_regmap; +/* + * The secondary CPUs check this register from the boot ROM for the jump + * destination. After that, it can be reused as a scratch register. + */ +#define UNIPHIER_SBC_ROM_BOOT_RSV2 0x1208 -static void __init uniphier_smp_prepare_cpus(unsigned int max_cpus) +static void __iomem *uniphier_smp_rom_boot_rsv2; +static unsigned int uniphier_smp_max_cpus; + +extern char uniphier_smp_trampoline; +extern char uniphier_smp_trampoline_jump; +extern char uniphier_smp_trampoline_poll_addr; +extern char uniphier_smp_trampoline_end; + +/* + * Copy trampoline code to the tail of the 1st section of the page table used + * in the boot ROM. This area is directly accessible by the secondary CPUs + * for all the UniPhier SoCs. + */ +static const phys_addr_t uniphier_smp_trampoline_dest_end = SECTION_SIZE; +static phys_addr_t uniphier_smp_trampoline_dest; + +static int __init uniphier_smp_copy_trampoline(phys_addr_t poll_addr) { - static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 }; - unsigned long scu_base_phys = 0; - void __iomem *scu_base; + size_t trmp_size; + static void __iomem *trmp_base; - sbcm_regmap = syscon_regmap_lookup_by_compatible( - "socionext,uniphier-system-bus-controller-misc"); - if (IS_ERR(sbcm_regmap)) { - pr_err("failed to regmap system-bus-controller-misc\n"); - goto err; + if (!uniphier_cache_l2_is_enabled()) { + pr_warn("outer cache is needed for SMP, but not enabled\n"); + return -ENODEV; } + uniphier_cache_l2_set_locked_ways(1); + + outer_flush_all(); + + trmp_size = &uniphier_smp_trampoline_end - &uniphier_smp_trampoline; + uniphier_smp_trampoline_dest = uniphier_smp_trampoline_dest_end - + trmp_size; + + uniphier_cache_l2_touch_range(uniphier_smp_trampoline_dest, + uniphier_smp_trampoline_dest_end); + + trmp_base = ioremap_cache(uniphier_smp_trampoline_dest, trmp_size); + if (!trmp_base) { + pr_err("failed to map trampoline destination area\n"); + return -ENOMEM; + } + + memcpy(trmp_base, &uniphier_smp_trampoline, trmp_size); + + writel(virt_to_phys(secondary_startup), + trmp_base + (&uniphier_smp_trampoline_jump - + &uniphier_smp_trampoline)); + + writel(poll_addr, trmp_base + (&uniphier_smp_trampoline_poll_addr - + &uniphier_smp_trampoline)); + + flush_cache_all(); /* flush out trampoline code to outer cache */ + + iounmap(trmp_base); + + return 0; +} + +static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus) +{ + struct device_node *np; + struct resource res; + phys_addr_t rom_rsv2_phys; + int ret; + + np = of_find_compatible_node(NULL, NULL, + "socionext,uniphier-system-bus-controller"); + ret = of_address_to_resource(np, 1, &res); + if (ret) { + pr_err("failed to get resource of system-bus-controller\n"); + return ret; + } + + rom_rsv2_phys = res.start + UNIPHIER_SBC_ROM_BOOT_RSV2; + + ret = uniphier_smp_copy_trampoline(rom_rsv2_phys); + if (ret) + return ret; + + uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, sizeof(SZ_4)); + if (!uniphier_smp_rom_boot_rsv2) { + pr_err("failed to map ROM_BOOT_RSV2 register\n"); + return -ENOMEM; + } + + writel(uniphier_smp_trampoline_dest, uniphier_smp_rom_boot_rsv2); + asm("sev"); /* Bring up all secondary CPUs to the trampoline code */ + + uniphier_smp_max_cpus = max_cpus; /* save for later use */ + + return 0; +} + +static void __init uniphier_smp_unprepare_trampoline(void) +{ + iounmap(uniphier_smp_rom_boot_rsv2); + + if (uniphier_smp_trampoline_dest) + outer_inv_range(uniphier_smp_trampoline_dest, + uniphier_smp_trampoline_dest_end); + + uniphier_cache_l2_set_locked_ways(0); +} + +static int __init uniphier_smp_enable_scu(void) +{ + unsigned long scu_base_phys = 0; + void __iomem *scu_base; + if (scu_a9_has_base()) scu_base_phys = scu_a9_get_base(); if (!scu_base_phys) { pr_err("failed to get scu base\n"); - goto err; + return -ENODEV; } scu_base = ioremap(scu_base_phys, SZ_128); if (!scu_base) { - pr_err("failed to remap scu base (0x%08lx)\n", scu_base_phys); - goto err; + pr_err("failed to map scu base\n"); + return -ENOMEM; } scu_enable(scu_base); iounmap(scu_base); + return 0; +} + +static void __init uniphier_smp_prepare_cpus(unsigned int max_cpus) +{ + static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 }; + int ret; + + ret = uniphier_smp_prepare_trampoline(max_cpus); + if (ret) + goto err; + + ret = uniphier_smp_enable_scu(); + if (ret) + goto err; + return; err: pr_warn("disabling SMP\n"); init_cpu_present(&only_cpu_0); - sbcm_regmap = NULL; + uniphier_smp_unprepare_trampoline(); } -static int uniphier_boot_secondary(unsigned int cpu, - struct task_struct *idle) +static int __init uniphier_smp_boot_secondary(unsigned int cpu, + struct task_struct *idle) { - int ret; + if (WARN_ON_ONCE(!uniphier_smp_rom_boot_rsv2)) + return -EFAULT; - if (!sbcm_regmap) - return -ENODEV; + writel(cpu, uniphier_smp_rom_boot_rsv2); + readl(uniphier_smp_rom_boot_rsv2); /* relax */ - ret = regmap_write(sbcm_regmap, 0x1208, - virt_to_phys(secondary_startup)); - if (!ret) - asm("sev"); /* wake up secondary CPU */ + asm("sev"); /* wake up secondary CPUs sleeping in the trampoline */ + + if (cpu == uniphier_smp_max_cpus - 1) { + /* clean up resources if this is the last CPU */ + uniphier_smp_unprepare_trampoline(); + } - return ret; + return 0; } -struct smp_operations uniphier_smp_ops __initdata = { +static struct smp_operations uniphier_smp_ops __initdata = { .smp_prepare_cpus = uniphier_smp_prepare_cpus, - .smp_boot_secondary = uniphier_boot_secondary, + .smp_boot_secondary = uniphier_smp_boot_secondary, }; CPU_METHOD_OF_DECLARE(uniphier_smp, "socionext,uniphier-smp", &uniphier_smp_ops); diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c index 2bc00b085e38..1cbed0331fd3 100644 --- a/arch/arm/mach-ux500/hotplug.c +++ b/arch/arm/mach-ux500/hotplug.c @@ -21,7 +21,7 @@ * * Called with IRQs disabled */ -void __ref ux500_cpu_die(unsigned int cpu) +void ux500_cpu_die(unsigned int cpu) { /* directly enter low power state, skipping secure registers */ for (;;) { diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c index f0ce6b8f5e71..f2fafc10a91d 100644 --- a/arch/arm/mach-vexpress/hotplug.c +++ b/arch/arm/mach-vexpress/hotplug.c @@ -85,7 +85,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) * * Called with IRQs disabled */ -void __ref vexpress_cpu_die(unsigned int cpu) +void vexpress_cpu_die(unsigned int cpu) { int spurious = 0; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c21941349b3e..41218867a9a6 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -974,6 +974,16 @@ config CACHE_TAUROS2 This option enables the Tauros2 L2 cache controller (as found on PJ1/PJ4). +config CACHE_UNIPHIER + bool "Enable the UniPhier outer cache controller" + depends on ARCH_UNIPHIER + default y + select OUTER_CACHE + select OUTER_CACHE_SYNC + help + This option enables the UniPhier outer cache (system cache) + controller. + config CACHE_XSC3L2 bool "Enable the L2 cache on XScale3" depends on CPU_XSC3 diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 57c8df500e8c..7f76d96ce546 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -103,3 +103,4 @@ obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o l2c-l2x0-resume.o obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o obj-$(CONFIG_CACHE_TAUROS2) += cache-tauros2.o +obj-$(CONFIG_CACHE_UNIPHIER) += cache-uniphier.o diff --git a/arch/arm/mm/cache-uniphier.c b/arch/arm/mm/cache-uniphier.c new file mode 100644 index 000000000000..0502ba17a3ab --- /dev/null +++ b/arch/arm/mm/cache-uniphier.c @@ -0,0 +1,555 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) "uniphier: " fmt + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/log2.h> +#include <linux/of_address.h> +#include <linux/slab.h> +#include <asm/hardware/cache-uniphier.h> +#include <asm/outercache.h> + +/* control registers */ +#define UNIPHIER_SSCC 0x0 /* Control Register */ +#define UNIPHIER_SSCC_BST BIT(20) /* UCWG burst read */ +#define UNIPHIER_SSCC_ACT BIT(19) /* Inst-Data separate */ +#define UNIPHIER_SSCC_WTG BIT(18) /* WT gathering on */ +#define UNIPHIER_SSCC_PRD BIT(17) /* enable pre-fetch */ +#define UNIPHIER_SSCC_ON BIT(0) /* enable cache */ +#define UNIPHIER_SSCLPDAWCR 0x30 /* Unified/Data Active Way Control */ +#define UNIPHIER_SSCLPIAWCR 0x34 /* Instruction Active Way Control */ + +/* revision registers */ +#define UNIPHIER_SSCID 0x0 /* ID Register */ + +/* operation registers */ +#define UNIPHIER_SSCOPE 0x244 /* Cache Operation Primitive Entry */ +#define UNIPHIER_SSCOPE_CM_INV 0x0 /* invalidate */ +#define UNIPHIER_SSCOPE_CM_CLEAN 0x1 /* clean */ +#define UNIPHIER_SSCOPE_CM_FLUSH 0x2 /* flush */ +#define UNIPHIER_SSCOPE_CM_SYNC 0x8 /* sync (drain bufs) */ +#define UNIPHIER_SSCOPE_CM_FLUSH_PREFETCH 0x9 /* flush p-fetch buf */ +#define UNIPHIER_SSCOQM 0x248 /* Cache Operation Queue Mode */ +#define UNIPHIER_SSCOQM_TID_MASK (0x3 << 21) +#define UNIPHIER_SSCOQM_TID_LRU_DATA (0x0 << 21) +#define UNIPHIER_SSCOQM_TID_LRU_INST (0x1 << 21) +#define UNIPHIER_SSCOQM_TID_WAY (0x2 << 21) +#define UNIPHIER_SSCOQM_S_MASK (0x3 << 17) +#define UNIPHIER_SSCOQM_S_RANGE (0x0 << 17) +#define UNIPHIER_SSCOQM_S_ALL (0x1 << 17) +#define UNIPHIER_SSCOQM_S_WAY (0x2 << 17) +#define UNIPHIER_SSCOQM_CE BIT(15) /* notify completion */ +#define UNIPHIER_SSCOQM_CM_INV 0x0 /* invalidate */ +#define UNIPHIER_SSCOQM_CM_CLEAN 0x1 /* clean */ +#define UNIPHIER_SSCOQM_CM_FLUSH 0x2 /* flush */ +#define UNIPHIER_SSCOQM_CM_PREFETCH 0x3 /* prefetch to cache */ +#define UNIPHIER_SSCOQM_CM_PREFETCH_BUF 0x4 /* prefetch to pf-buf */ +#define UNIPHIER_SSCOQM_CM_TOUCH 0x5 /* touch */ +#define UNIPHIER_SSCOQM_CM_TOUCH_ZERO 0x6 /* touch to zero */ +#define UNIPHIER_SSCOQM_CM_TOUCH_DIRTY 0x7 /* touch with dirty */ +#define UNIPHIER_SSCOQAD 0x24c /* Cache Operation Queue Address */ +#define UNIPHIER_SSCOQSZ 0x250 /* Cache Operation Queue Size */ +#define UNIPHIER_SSCOQMASK 0x254 /* Cache Operation Queue Address Mask */ +#define UNIPHIER_SSCOQWN 0x258 /* Cache Operation Queue Way Number */ +#define UNIPHIER_SSCOPPQSEF 0x25c /* Cache Operation Queue Set Complete*/ +#define UNIPHIER_SSCOPPQSEF_FE BIT(1) +#define UNIPHIER_SSCOPPQSEF_OE BIT(0) +#define UNIPHIER_SSCOLPQS 0x260 /* Cache Operation Queue Status */ +#define UNIPHIER_SSCOLPQS_EF BIT(2) +#define UNIPHIER_SSCOLPQS_EST BIT(1) +#define UNIPHIER_SSCOLPQS_QST BIT(0) + +/* Is the touch/pre-fetch destination specified by ways? */ +#define UNIPHIER_SSCOQM_TID_IS_WAY(op) \ + ((op & UNIPHIER_SSCOQM_TID_MASK) == UNIPHIER_SSCOQM_TID_WAY) +/* Is the operation region specified by address range? */ +#define UNIPHIER_SSCOQM_S_IS_RANGE(op) \ + ((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE) + +/** + * uniphier_cache_data - UniPhier outer cache specific data + * + * @ctrl_base: virtual base address of control registers + * @rev_base: virtual base address of revision registers + * @op_base: virtual base address of operation registers + * @way_present_mask: each bit specifies if the way is present + * @way_locked_mask: each bit specifies if the way is locked + * @nsets: number of associativity sets + * @line_size: line size in bytes + * @range_op_max_size: max size that can be handled by a single range operation + * @list: list node to include this level in the whole cache hierarchy + */ +struct uniphier_cache_data { + void __iomem *ctrl_base; + void __iomem *rev_base; + void __iomem *op_base; + u32 way_present_mask; + u32 way_locked_mask; + u32 nsets; + u32 line_size; + u32 range_op_max_size; + struct list_head list; +}; + +/* + * List of the whole outer cache hierarchy. This list is only modified during + * the early boot stage, so no mutex is taken for the access to the list. + */ +static LIST_HEAD(uniphier_cache_list); + +/** + * __uniphier_cache_sync - perform a sync point for a particular cache level + * + * @data: cache controller specific data + */ +static void __uniphier_cache_sync(struct uniphier_cache_data *data) +{ + /* This sequence need not be atomic. Do not disable IRQ. */ + writel_relaxed(UNIPHIER_SSCOPE_CM_SYNC, + data->op_base + UNIPHIER_SSCOPE); + /* need a read back to confirm */ + readl_relaxed(data->op_base + UNIPHIER_SSCOPE); +} + +/** + * __uniphier_cache_maint_common - run a queue operation for a particular level + * + * @data: cache controller specific data + * @start: start address of range operation (don't care for "all" operation) + * @size: data size of range operation (don't care for "all" operation) + * @operation: flags to specify the desired cache operation + */ +static void __uniphier_cache_maint_common(struct uniphier_cache_data *data, + unsigned long start, + unsigned long size, + u32 operation) +{ + unsigned long flags; + + /* + * No spin lock is necessary here because: + * + * [1] This outer cache controller is able to accept maintenance + * operations from multiple CPUs at a time in an SMP system; if a + * maintenance operation is under way and another operation is issued, + * the new one is stored in the queue. The controller performs one + * operation after another. If the queue is full, the status register, + * UNIPHIER_SSCOPPQSEF, indicates that the queue registration has + * failed. The status registers, UNIPHIER_{SSCOPPQSEF, SSCOLPQS}, have + * different instances for each CPU, i.e. each CPU can track the status + * of the maintenance operations triggered by itself. + * + * [2] The cache command registers, UNIPHIER_{SSCOQM, SSCOQAD, SSCOQSZ, + * SSCOQWN}, are shared between multiple CPUs, but the hardware still + * guarantees the registration sequence is atomic; the write access to + * them are arbitrated by the hardware. The first accessor to the + * register, UNIPHIER_SSCOQM, holds the access right and it is released + * by reading the status register, UNIPHIER_SSCOPPQSEF. While one CPU + * is holding the access right, other CPUs fail to register operations. + * One CPU should not hold the access right for a long time, so local + * IRQs should be disabled while the following sequence. + */ + local_irq_save(flags); + + /* clear the complete notification flag */ + writel_relaxed(UNIPHIER_SSCOLPQS_EF, data->op_base + UNIPHIER_SSCOLPQS); + + do { + /* set cache operation */ + writel_relaxed(UNIPHIER_SSCOQM_CE | operation, + data->op_base + UNIPHIER_SSCOQM); + + /* set address range if needed */ + if (likely(UNIPHIER_SSCOQM_S_IS_RANGE(operation))) { + writel_relaxed(start, data->op_base + UNIPHIER_SSCOQAD); + writel_relaxed(size, data->op_base + UNIPHIER_SSCOQSZ); + } + + /* set target ways if needed */ + if (unlikely(UNIPHIER_SSCOQM_TID_IS_WAY(operation))) + writel_relaxed(data->way_locked_mask, + data->op_base + UNIPHIER_SSCOQWN); + } while (unlikely(readl_relaxed(data->op_base + UNIPHIER_SSCOPPQSEF) & + (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE))); + + /* wait until the operation is completed */ + while (likely(readl_relaxed(data->op_base + UNIPHIER_SSCOLPQS) != + UNIPHIER_SSCOLPQS_EF)) + cpu_relax(); + + local_irq_restore(flags); +} + +static void __uniphier_cache_maint_all(struct uniphier_cache_data *data, + u32 operation) +{ + __uniphier_cache_maint_common(data, 0, 0, + UNIPHIER_SSCOQM_S_ALL | operation); + + __uniphier_cache_sync(data); +} + +static void __uniphier_cache_maint_range(struct uniphier_cache_data *data, + unsigned long start, unsigned long end, + u32 operation) +{ + unsigned long size; + + /* + * If the start address is not aligned, + * perform a cache operation for the first cache-line + */ + start = start & ~(data->line_size - 1); + + size = end - start; + + if (unlikely(size >= (unsigned long)(-data->line_size))) { + /* this means cache operation for all range */ + __uniphier_cache_maint_all(data, operation); + return; + } + + /* + * If the end address is not aligned, + * perform a cache operation for the last cache-line + */ + size = ALIGN(size, data->line_size); + + while (size) { + unsigned long chunk_size = min_t(unsigned long, size, + data->range_op_max_size); + + __uniphier_cache_maint_common(data, start, chunk_size, + UNIPHIER_SSCOQM_S_RANGE | operation); + + start += chunk_size; + size -= chunk_size; + } + + __uniphier_cache_sync(data); +} + +static void __uniphier_cache_enable(struct uniphier_cache_data *data, bool on) +{ + u32 val = 0; + + if (on) + val = UNIPHIER_SSCC_WTG | UNIPHIER_SSCC_PRD | UNIPHIER_SSCC_ON; + + writel_relaxed(val, data->ctrl_base + UNIPHIER_SSCC); +} + +static void __init __uniphier_cache_set_locked_ways( + struct uniphier_cache_data *data, + u32 way_mask) +{ + data->way_locked_mask = way_mask & data->way_present_mask; + + writel_relaxed(~data->way_locked_mask & data->way_present_mask, + data->ctrl_base + UNIPHIER_SSCLPDAWCR); +} + +static void uniphier_cache_maint_range(unsigned long start, unsigned long end, + u32 operation) +{ + struct uniphier_cache_data *data; + + list_for_each_entry(data, &uniphier_cache_list, list) + __uniphier_cache_maint_range(data, start, end, operation); +} + +static void uniphier_cache_maint_all(u32 operation) +{ + struct uniphier_cache_data *data; + + list_for_each_entry(data, &uniphier_cache_list, list) + __uniphier_cache_maint_all(data, operation); +} + +static void uniphier_cache_inv_range(unsigned long start, unsigned long end) +{ + uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_INV); +} + +static void uniphier_cache_clean_range(unsigned long start, unsigned long end) +{ + uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_CLEAN); +} + +static void uniphier_cache_flush_range(unsigned long start, unsigned long end) +{ + uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_FLUSH); +} + +static void __init uniphier_cache_inv_all(void) +{ + uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_INV); +} + +static void uniphier_cache_flush_all(void) +{ + uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_FLUSH); +} + +static void uniphier_cache_disable(void) +{ + struct uniphier_cache_data *data; + + list_for_each_entry_reverse(data, &uniphier_cache_list, list) + __uniphier_cache_enable(data, false); + + uniphier_cache_flush_all(); +} + +static void __init uniphier_cache_enable(void) +{ + struct uniphier_cache_data *data; + + uniphier_cache_inv_all(); + + list_for_each_entry(data, &uniphier_cache_list, list) { + __uniphier_cache_enable(data, true); + __uniphier_cache_set_locked_ways(data, 0); + } +} + +static void uniphier_cache_sync(void) +{ + struct uniphier_cache_data *data; + + list_for_each_entry(data, &uniphier_cache_list, list) + __uniphier_cache_sync(data); +} + +int __init uniphier_cache_l2_is_enabled(void) +{ + struct uniphier_cache_data *data; + + data = list_first_entry_or_null(&uniphier_cache_list, + struct uniphier_cache_data, list); + if (!data) + return 0; + + return !!(readl_relaxed(data->ctrl_base + UNIPHIER_SSCC) & + UNIPHIER_SSCC_ON); +} + +void __init uniphier_cache_l2_touch_range(unsigned long start, + unsigned long end) +{ + struct uniphier_cache_data *data; + + data = list_first_entry_or_null(&uniphier_cache_list, + struct uniphier_cache_data, list); + if (data) + __uniphier_cache_maint_range(data, start, end, + UNIPHIER_SSCOQM_TID_WAY | + UNIPHIER_SSCOQM_CM_TOUCH); +} + +void __init uniphier_cache_l2_set_locked_ways(u32 way_mask) +{ + struct uniphier_cache_data *data; + + data = list_first_entry_or_null(&uniphier_cache_list, + struct uniphier_cache_data, list); + if (data) + __uniphier_cache_set_locked_ways(data, way_mask); +} + +static const struct of_device_id uniphier_cache_match[] __initconst = { + { + .compatible = "socionext,uniphier-system-cache", + }, + { /* sentinel */ } +}; + +static struct device_node * __init uniphier_cache_get_next_level_node( + struct device_node *np) +{ + u32 phandle; + + if (of_property_read_u32(np, "next-level-cache", &phandle)) + return NULL; + + return of_find_node_by_phandle(phandle); +} + +static int __init __uniphier_cache_init(struct device_node *np, + unsigned int *cache_level) +{ + struct uniphier_cache_data *data; + u32 level, cache_size; + struct device_node *next_np; + int ret = 0; + + if (!of_match_node(uniphier_cache_match, np)) { + pr_err("L%d: not compatible with uniphier cache\n", + *cache_level); + return -EINVAL; + } + + if (of_property_read_u32(np, "cache-level", &level)) { + pr_err("L%d: cache-level is not specified\n", *cache_level); + return -EINVAL; + } + + if (level != *cache_level) { + pr_err("L%d: cache-level is unexpected value %d\n", + *cache_level, level); + return -EINVAL; + } + + if (!of_property_read_bool(np, "cache-unified")) { + pr_err("L%d: cache-unified is not specified\n", *cache_level); + return -EINVAL; + } + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + if (of_property_read_u32(np, "cache-line-size", &data->line_size) || + !is_power_of_2(data->line_size)) { + pr_err("L%d: cache-line-size is unspecified or invalid\n", + *cache_level); + ret = -EINVAL; + goto err; + } + + if (of_property_read_u32(np, "cache-sets", &data->nsets) || + !is_power_of_2(data->nsets)) { + pr_err("L%d: cache-sets is unspecified or invalid\n", + *cache_level); + ret = -EINVAL; + goto err; + } + + if (of_property_read_u32(np, "cache-size", &cache_size) || + cache_size == 0 || cache_size % (data->nsets * data->line_size)) { + pr_err("L%d: cache-size is unspecified or invalid\n", + *cache_level); + ret = -EINVAL; + goto err; + } + + data->way_present_mask = + ((u32)1 << cache_size / data->nsets / data->line_size) - 1; + + data->ctrl_base = of_iomap(np, 0); + if (!data->ctrl_base) { + pr_err("L%d: failed to map control register\n", *cache_level); + ret = -ENOMEM; + goto err; + } + + data->rev_base = of_iomap(np, 1); + if (!data->rev_base) { + pr_err("L%d: failed to map revision register\n", *cache_level); + ret = -ENOMEM; + goto err; + } + + data->op_base = of_iomap(np, 2); + if (!data->op_base) { + pr_err("L%d: failed to map operation register\n", *cache_level); + ret = -ENOMEM; + goto err; + } + + if (*cache_level == 2) { + u32 revision = readl(data->rev_base + UNIPHIER_SSCID); + /* + * The size of range operation is limited to (1 << 22) or less + * for PH-sLD8 or older SoCs. + */ + if (revision <= 0x16) + data->range_op_max_size = (u32)1 << 22; + } + + data->range_op_max_size -= data->line_size; + + INIT_LIST_HEAD(&data->list); + list_add_tail(&data->list, &uniphier_cache_list); /* no mutex */ + + /* + * OK, this level has been successfully initialized. Look for the next + * level cache. Do not roll back even if the initialization of the + * next level cache fails because we want to continue with available + * cache levels. + */ + next_np = uniphier_cache_get_next_level_node(np); + if (next_np) { + (*cache_level)++; + ret = __uniphier_cache_init(next_np, cache_level); + } + of_node_put(next_np); + + return ret; +err: + iounmap(data->op_base); + iounmap(data->rev_base); + iounmap(data->ctrl_base); + kfree(data); + + return ret; +} + +int __init uniphier_cache_init(void) +{ + struct device_node *np = NULL; + unsigned int cache_level; + int ret = 0; + + /* look for level 2 cache */ + while ((np = of_find_matching_node(np, uniphier_cache_match))) + if (!of_property_read_u32(np, "cache-level", &cache_level) && + cache_level == 2) + break; + + if (!np) + return -ENODEV; + + ret = __uniphier_cache_init(np, &cache_level); + of_node_put(np); + + if (ret) { + /* + * Error out iif L2 initialization fails. Continue with any + * error on L3 or outer because they are optional. + */ + if (cache_level == 2) { + pr_err("failed to initialize L2 cache\n"); + return ret; + } + + cache_level--; + ret = 0; + } + + outer_cache.inv_range = uniphier_cache_inv_range; + outer_cache.clean_range = uniphier_cache_clean_range; + outer_cache.flush_range = uniphier_cache_flush_range; + outer_cache.flush_all = uniphier_cache_flush_all; + outer_cache.disable = uniphier_cache_disable; + outer_cache.sync = uniphier_cache_sync; + + uniphier_cache_enable(); + + pr_info("enabled outer cache (cache level: %d)\n", cache_level); + + return ret; +} diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index 9df5f09585ca..d02f8187b1cc 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -147,13 +147,3 @@ void *kmap_atomic_pfn(unsigned long pfn) return (void *)vaddr; } - -struct page *kmap_atomic_to_page(const void *ptr) -{ - unsigned long vaddr = (unsigned long)ptr; - - if (vaddr < FIXADDR_START) - return virt_to_page(ptr); - - return pte_page(get_fixmap_pte(vaddr)); -} diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 2f4b14cfddb4..591f9db3bf40 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -1061,7 +1061,7 @@ void bpf_jit_compile(struct bpf_prog *fp) } build_epilogue(&ctx); - flush_icache_range((u32)ctx.target, (u32)(ctx.target + ctx.idx)); + flush_icache_range((u32)header, (u32)(ctx.target + ctx.idx)); #if __LINUX_ARM_ARCH__ < 7 if (ctx.imm_count) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 851fe11c6069..9ac16a482ff1 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -27,6 +27,7 @@ config ARM64 select CPU_PM if (SUSPEND || CPU_IDLE) select DCACHE_WORD_ACCESS select EDAC_SUPPORT + select FRAME_POINTER select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GENERIC_CLOCKEVENTS_BROADCAST diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug index c24d6adc0420..04fb73b973f1 100644 --- a/arch/arm64/Kconfig.debug +++ b/arch/arm64/Kconfig.debug @@ -2,10 +2,6 @@ menu "Kernel hacking" source "lib/Kconfig.debug" -config FRAME_POINTER - bool - default y - config ARM64_PTDUMP bool "Export kernel pagetable layout to userspace via debugfs" depends on DEBUG_KERNEL diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 23800a19a7bc..4043c35962cc 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -7,6 +7,7 @@ config ARCH_BCM_IPROC config ARCH_BERLIN bool "Marvell Berlin SoC Family" + select ARCH_REQUIRE_GPIOLIB select DW_APB_ICTL help This enables support for Marvell Berlin SoC Family @@ -28,10 +29,10 @@ config ARCH_EXYNOS7 help This enables support for Samsung Exynos7 SoC family -config ARCH_FSL_LS2085A - bool "Freescale LS2085A SOC" +config ARCH_LAYERSCAPE + bool "ARMv8 based Freescale Layerscape SoC family" help - This enables support for Freescale LS2085A SOC. + This enables support for the Freescale Layerscape SoC family. config ARCH_HISI bool "Hisilicon SoC Family" @@ -66,6 +67,11 @@ config ARCH_SEATTLE help This enables support for AMD Seattle SOC Family +config ARCH_STRATIX10 + bool "Altera's Stratix 10 SoCFPGA Family" + help + This enables support for Altera's Stratix 10 SoCFPGA Family. + config ARCH_TEGRA bool "NVIDIA Tegra SoC Family" select ARCH_HAS_RESET_CONTROLLER diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index b01ec43d1ca9..eb3c42d97175 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -1,3 +1,4 @@ +dts-dirs += altera dts-dirs += amd dts-dirs += apm dts-dirs += arm diff --git a/arch/arm64/boot/dts/altera/Makefile b/arch/arm64/boot/dts/altera/Makefile new file mode 100644 index 000000000000..d7a641698d77 --- /dev/null +++ b/arch/arm64/boot/dts/altera/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi new file mode 100644 index 000000000000..445aa678f914 --- /dev/null +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -0,0 +1,358 @@ +/* + * Copyright Altera Corporation (C) 2015. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/dts-v1/; + +/ { + compatible = "altr,socfpga-stratix10"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x1>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x2>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x3>; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <0 120 8>, + <0 121 8>, + <0 122 8>, + <0 123 8>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + intc: intc@fffc1000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0xfffc1000 0x1000>, + <0x0 0xfffc2000 0x2000>, + <0x0 0xfffc4000 0x2000>, + <0x0 0xfffc6000 0x2000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + device_type = "soc"; + interrupt-parent = <&intc>; + ranges = <0 0 0 0xffffffff>; + + clkmgr@ffd1000 { + compatible = "altr,clk-mgr"; + reg = <0xffd10000 0x1000>; + }; + + gmac0: ethernet@ff800000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + reg = <0xff800000 0x2000>; + interrupts = <0 90 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00]; + status = "disabled"; + }; + + gmac1: ethernet@ff802000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + reg = <0xff802000 0x2000>; + interrupts = <0 91 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00]; + status = "disabled"; + }; + + gmac2: ethernet@ff804000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + reg = <0xff804000 0x2000>; + interrupts = <0 92 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00]; + status = "disabled"; + }; + + gpio0: gpio@ffc03200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xffc03200 0x100>; + status = "disabled"; + + porta: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <24>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 110 4>; + }; + }; + + gpio1: gpio@ffc03300 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xffc03300 0x100>; + status = "disabled"; + + portb: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <24>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 110 4>; + }; + }; + + i2c0: i2c@ffc02800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02800 0x100>; + interrupts = <0 103 4>; + status = "disabled"; + }; + + i2c1: i2c@ffc02900 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02900 0x100>; + interrupts = <0 104 4>; + status = "disabled"; + }; + + i2c2: i2c@ffc02a00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02a00 0x100>; + interrupts = <0 105 4>; + status = "disabled"; + }; + + i2c3: i2c@ffc02b00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02b00 0x100>; + interrupts = <0 106 4>; + status = "disabled"; + }; + + i2c4: i2c@ffc02c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02c00 0x100>; + interrupts = <0 107 4>; + status = "disabled"; + }; + + mmc: dwmmc0@ff808000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "altr,socfpga-dw-mshc"; + reg = <0xff808000 0x1000>; + interrupts = <0 96 4>; + fifo-depth = <0x400>; + status = "disabled"; + }; + + ocram: sram@ffe00000 { + compatible = "mmio-sram"; + reg = <0xffe00000 0x100000>; + }; + + rst: rstmgr@ffd11000 { + #reset-cells = <1>; + compatible = "altr,rst-mgr"; + reg = <0xffd11000 0x1000>; + }; + + spi0: spi@ffda4000 { + compatible = "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xffda4000 0x1000>; + interrupts = <0 101 4>; + num-chipselect = <4>; + bus-num = <0>; + status = "disabled"; + }; + + spi1: spi@ffda5000 { + compatible = "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xffda5000 0x1000>; + interrupts = <0 102 4>; + num-chipselect = <4>; + bus-num = <0>; + status = "disabled"; + }; + + sysmgr: sysmgr@ffd12000 { + compatible = "altr,sys-mgr", "syscon"; + reg = <0xffd12000 0x1000>; + }; + + /* Local timer */ + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xf01>, + <1 14 0xf01>, + <1 11 0xf01>, + <1 10 0xf01>; + }; + + timer0: timer0@ffc03000 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 113 4>; + reg = <0xffc03000 0x100>; + }; + + timer1: timer1@ffc03100 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 114 4>; + reg = <0xffc03100 0x100>; + }; + + timer2: timer2@ffd00000 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 115 4>; + reg = <0xffd00000 0x100>; + }; + + timer3: timer3@ffd00100 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 116 4>; + reg = <0xffd00100 0x100>; + }; + + uart0: serial0@ffc02000 { + compatible = "snps,dw-apb-uart"; + reg = <0xffc02000 0x100>; + interrupts = <0 108 4>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: serial1@ffc02100 { + compatible = "snps,dw-apb-uart"; + reg = <0xffc02100 0x100>; + interrupts = <0 109 4>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + usbphy0: usbphy@0 { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + status = "okay"; + }; + + usb0: usb@ffb00000 { + compatible = "snps,dwc2"; + reg = <0xffb00000 0x40000>; + interrupts = <0 93 4>; + phys = <&usbphy0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usb1: usb@ffb40000 { + compatible = "snps,dwc2"; + reg = <0xffb40000 0x40000>; + interrupts = <0 94 4>; + phys = <&usbphy0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + watchdog0: watchdog@ffd00200 { + compatible = "snps,dw-wdt"; + reg = <0xffd00200 0x100>; + interrupts = <0 117 4>; + status = "disabled"; + }; + + watchdog1: watchdog@ffd00300 { + compatible = "snps,dw-wdt"; + reg = <0xffd00300 0x100>; + interrupts = <0 118 4>; + status = "disabled"; + }; + + watchdog2: watchdog@ffd00400 { + compatible = "snps,dw-wdt"; + reg = <0xffd00400 0x100>; + interrupts = <0 125 4>; + status = "disabled"; + }; + + watchdog3: watchdog@ffd00500 { + compatible = "snps,dw-wdt"; + reg = <0xffd00500 0x100>; + interrupts = <0 126 4>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts new file mode 100644 index 000000000000..41ea2dba2fce --- /dev/null +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -0,0 +1,39 @@ +/* + * Copyright Altera Corporation (C) 2015. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/include/ "socfpga_stratix10.dtsi" + +/ { + model = "SoCFPGA Stratix 10 SoCDK"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/apm/Makefile b/arch/arm64/boot/dts/apm/Makefile index a2afabbc1717..c75f17a49471 100644 --- a/arch/arm64/boot/dts/apm/Makefile +++ b/arch/arm64/boot/dts/apm/Makefile @@ -1,4 +1,5 @@ dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb +dtb-$(CONFIG_ARCH_XGENE) += apm-merlin.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/apm/apm-merlin.dts b/arch/arm64/boot/dts/apm/apm-merlin.dts new file mode 100644 index 000000000000..119a469bd189 --- /dev/null +++ b/arch/arm64/boot/dts/apm/apm-merlin.dts @@ -0,0 +1,72 @@ +/* + * dts file for AppliedMicro (APM) Merlin Board + * + * Copyright (C) 2015, Applied Micro Circuits Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/dts-v1/; + +/include/ "apm-shadowcat.dtsi" + +/ { + model = "APM X-Gene Merlin board"; + compatible = "apm,merlin", "apm,xgene-shadowcat"; + + chosen { }; + + memory { + device_type = "memory"; + reg = < 0x1 0x00000000 0x0 0x80000000 >; + }; + + gpio-keys { + compatible = "gpio-keys"; + button@1 { + label = "POWER"; + linux,code = <116>; + linux,input-type = <0x1>; + interrupts = <0x0 0x28 0x1>; + }; + }; + + poweroff_mbox: poweroff_mbox@10548000 { + compatible = "syscon"; + reg = <0x0 0x10548000 0x0 0x30>; + }; + + poweroff: poweroff@10548010 { + compatible = "syscon-poweroff"; + regmap = <&poweroff_mbox>; + offset = <0x10>; + mask = <0x1>; + }; +}; + +&serial0 { + status = "ok"; +}; + +&sata1 { + status = "ok"; +}; + +&sata2 { + status = "ok"; +}; + +&sata3 { + status = "ok"; +}; + +&sgenet0 { + status = "ok"; +}; + +&xgenet1 { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts index 4c55833d8a41..01cdeda93c3a 100644 --- a/arch/arm64/boot/dts/apm/apm-mustang.dts +++ b/arch/arm64/boot/dts/apm/apm-mustang.dts @@ -33,6 +33,18 @@ interrupts = <0x0 0x2d 0x1>; }; }; + + poweroff_mbox: poweroff_mbox@10548000 { + compatible = "syscon"; + reg = <0x0 0x10548000 0x0 0x30>; + }; + + poweroff: poweroff@10548010 { + compatible = "syscon-poweroff"; + regmap = <&poweroff_mbox>; + offset = <0x10>; + mask = <0x1>; + }; }; &pcie0clk { diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi new file mode 100644 index 000000000000..c804f8f1f38c --- /dev/null +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi @@ -0,0 +1,271 @@ +/* + * dts file for AppliedMicro (APM) X-Gene Shadowcat SOC + * + * Copyright (C) 2015, Applied Micro Circuits Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/ { + compatible = "apm,xgene-shadowcat"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@000 { + device_type = "cpu"; + compatible = "apm,strega", "arm,armv8"; + reg = <0x0 0x000>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@001 { + device_type = "cpu"; + compatible = "apm,strega", "arm,armv8"; + reg = <0x0 0x001>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@100 { + device_type = "cpu"; + compatible = "apm,strega", "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@101 { + device_type = "cpu"; + compatible = "apm,strega", "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@200 { + device_type = "cpu"; + compatible = "apm,strega", "arm,armv8"; + reg = <0x0 0x200>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@201 { + device_type = "cpu"; + compatible = "apm,strega", "arm,armv8"; + reg = <0x0 0x201>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@300 { + device_type = "cpu"; + compatible = "apm,strega", "arm,armv8"; + reg = <0x0 0x300>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@301 { + device_type = "cpu"; + compatible = "apm,strega", "arm,armv8"; + reg = <0x0 0x301>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + }; + + gic: interrupt-controller@78090000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + interrupt-controller; + interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */ + ranges = <0 0 0 0x79000000 0x0 0x800000>; /* MSI Range */ + reg = <0x0 0x78090000 0x0 0x10000>, /* GIC Dist */ + <0x0 0x780A0000 0x0 0x20000>, /* GIC CPU */ + <0x0 0x780C0000 0x0 0x10000>, /* GIC VCPU Control */ + <0x0 0x780E0000 0x0 0x20000>; /* GIC VCPU */ + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <1 12 0xff04>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 0 0xff04>, /* Secure Phys IRQ */ + <1 13 0xff04>, /* Non-secure Phys IRQ */ + <1 14 0xff04>, /* Virt IRQ */ + <1 15 0xff04>; /* Hyp IRQ */ + clock-frequency = <50000000>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + refclk: refclk { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <100000000>; + clock-output-names = "refclk"; + }; + + socpll: socpll@17000120 { + compatible = "apm,xgene-socpll-clock"; + #clock-cells = <1>; + clocks = <&refclk 0>; + reg = <0x0 0x17000120 0x0 0x1000>; + clock-output-names = "socpll"; + }; + + socplldiv2: socplldiv2 { + compatible = "fixed-factor-clock"; + #clock-cells = <1>; + clocks = <&socpll 0>; + clock-mult = <1>; + clock-div = <2>; + clock-output-names = "socplldiv2"; + }; + + pcie0clk: pcie0clk@1f2bc000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2bc000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie0clk"; + }; + + xge0clk: xge0clk@1f61c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f61c000 0x0 0x1000>; + reg-names = "csr-reg"; + enable-mask = <0x3>; + csr-mask = <0x3>; + clock-output-names = "xge0clk"; + }; + + xge1clk: xge1clk@1f62c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f62c000 0x0 0x1000>; + reg-names = "csr-reg"; + enable-mask = <0x3>; + csr-mask = <0x3>; + clock-output-names = "xge1clk"; + }; + }; + + scu: system-clk-controller@17000000 { + compatible = "apm,xgene-scu","syscon"; + reg = <0x0 0x17000000 0x0 0x400>; + }; + + reboot: reboot@17000014 { + compatible = "syscon-reboot"; + regmap = <&scu>; + offset = <0x14>; + mask = <0x1>; + }; + + serial0: serial@10600000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0 0x10600000 0x0 0x1000>; + reg-shift = <2>; + clock-frequency = <10000000>; + interrupt-parent = <&gic>; + interrupts = <0x0 0x4c 0x4>; + }; + + sata1: sata@1a000000 { + compatible = "apm,xgene-ahci"; + reg = <0x0 0x1a000000 0x0 0x1000>, + <0x0 0x1f200000 0x0 0x1000>, + <0x0 0x1f20d000 0x0 0x1000>, + <0x0 0x1f20e000 0x0 0x1000>; + interrupts = <0x0 0x5a 0x4>; + dma-coherent; + }; + + sata2: sata@1a200000 { + compatible = "apm,xgene-ahci"; + reg = <0x0 0x1a200000 0x0 0x1000>, + <0x0 0x1f210000 0x0 0x1000>, + <0x0 0x1f21d000 0x0 0x1000>, + <0x0 0x1f21e000 0x0 0x1000>; + interrupts = <0x0 0x5b 0x4>; + dma-coherent; + }; + + sata3: sata@1a400000 { + compatible = "apm,xgene-ahci"; + reg = <0x0 0x1a400000 0x0 0x1000>, + <0x0 0x1f220000 0x0 0x1000>, + <0x0 0x1f22d000 0x0 0x1000>, + <0x0 0x1f22e000 0x0 0x1000>; + interrupts = <0x0 0x5c 0x4>; + dma-coherent; + }; + + sbgpio: sbgpio@17001000{ + compatible = "apm,xgene-gpio-sb"; + reg = <0x0 0x17001000 0x0 0x400>; + #gpio-cells = <2>; + gpio-controller; + interrupts = <0x0 0x28 0x1>, + <0x0 0x29 0x1>, + <0x0 0x2a 0x1>, + <0x0 0x2b 0x1>, + <0x0 0x2c 0x1>, + <0x0 0x2d 0x1>, + <0x0 0x2e 0x1>, + <0x0 0x2f 0x1>; + }; + + sgenet0: ethernet@1f610000 { + compatible = "apm,xgene2-sgenet"; + status = "disabled"; + reg = <0x0 0x1f610000 0x0 0x10000>, + <0x0 0x1f600000 0x0 0Xd100>, + <0x0 0x20000000 0x0 0X20000>; + interrupts = <0 96 4>, + <0 97 4>; + dma-coherent; + clocks = <&xge0clk 0>; + local-mac-address = [00 01 73 00 00 01]; + phy-connection-type = "sgmii"; + }; + + xgenet1: ethernet@1f620000 { + compatible = "apm,xgene2-xgenet"; + status = "disabled"; + reg = <0x0 0x1f620000 0x0 0x10000>, + <0x0 0x1f600000 0x0 0Xd100>, + <0x0 0x20000000 0x0 0X220000>; + interrupts = <0 108 4>, + <0 109 4>; + port-id = <1>; + dma-coherent; + clocks = <&xge1clk 0>; + local-mac-address = [00 01 73 00 00 02]; + phy-connection-type = "xgmii"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index d6c9630a5c20..6c5ed119934f 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -97,6 +97,11 @@ clock-frequency = <50000000>; }; + pmu { + compatible = "apm,potenza-pmu", "arm,armv8-pmuv3"; + interrupts = <1 12 0xff04>; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -407,6 +412,18 @@ 0x0 0x1f 0x4>; }; + scu: system-clk-controller@17000000 { + compatible = "apm,xgene-scu","syscon"; + reg = <0x0 0x17000000 0x0 0x400>; + }; + + reboot: reboot@17000014 { + compatible = "syscon-reboot"; + regmap = <&scu>; + offset = <0x14>; + mask = <0x1>; + }; + csw: csw@7e200000 { compatible = "apm,xgene-csw", "syscon"; reg = <0x0 0x7e200000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index e3ee96036eca..dd5158eb5872 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -17,6 +17,18 @@ }; }; + mailbox: mhu@2b1f0000 { + compatible = "arm,mhu", "arm,primecell"; + reg = <0x0 0x2b1f0000 0x0 0x1000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mhu_lpri_rx", + "mhu_hpri_rx"; + #mbox-cells = <1>; + clocks = <&soc_refclk100mhz>; + clock-names = "apb_pclk"; + }; + gic: interrupt-controller@2c010000 { compatible = "arm,gic-400", "arm,cortex-a15-gic"; reg = <0x0 0x2c010000 0 0x1000>, @@ -44,6 +56,53 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; }; + sram: sram@2e000000 { + compatible = "arm,juno-sram-ns", "mmio-sram"; + reg = <0x0 0x2e000000 0x0 0x8000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x2e000000 0x8000>; + + cpu_scp_lpri: scp-shmem@0 { + compatible = "arm,juno-scp-shmem"; + reg = <0x0 0x200>; + }; + + cpu_scp_hpri: scp-shmem@200 { + compatible = "arm,juno-scp-shmem"; + reg = <0x200 0x200>; + }; + }; + + scpi { + compatible = "arm,scpi"; + mboxes = <&mailbox 1>; + shmem = <&cpu_scp_hpri>; + + clocks { + compatible = "arm,scpi-clocks"; + + scpi_dvfs: scpi_clocks@0 { + compatible = "arm,scpi-dvfs-clocks"; + #clock-cells = <1>; + clock-indices = <0>, <1>, <2>; + clock-output-names = "atlclk", "aplclk","gpuclk"; + }; + scpi_clk: scpi_clocks@3 { + compatible = "arm,scpi-variable-clocks"; + #clock-cells = <1>; + clock-indices = <3>, <4>; + clock-output-names = "pxlclk0", "pxlclk1"; + }; + }; + + scpi_sensors0: sensors { + compatible = "arm,scpi-sensors"; + #thermal-sensor-cells = <1>; + }; + }; + /include/ "juno-clocks.dtsi" dma@7ff00000 { diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index 3c386680357e..413f1b9ebcd4 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -103,6 +103,21 @@ }; }; + flash@0,00000000 { + /* 2 * 32MiB NOR Flash memory mounted on CS0 */ + compatible = "arm,vexpress-flash", "cfi-flash"; + linux,part-probe = "afs"; + reg = <0 0x00000000 0x04000000>; + bank-width = <4>; + /* + * Unfortunately, accessing the flash disturbs + * the CPU idle states (suspend) and CPU + * hotplug of the platform. For this reason, + * flash hardware access is disabled by default. + */ + status = "disabled"; + }; + ethernet@2,00000000 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <2 0x00000000 0x10000>; diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index 734e1272b19f..93bc3d7d51c0 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -34,12 +34,39 @@ #address-cells = <2>; #size-cells = <0>; + cpu-map { + cluster0 { + core0 { + cpu = <&A57_0>; + }; + core1 { + cpu = <&A57_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&A53_0>; + }; + core1 { + cpu = <&A53_1>; + }; + core2 { + cpu = <&A53_2>; + }; + core3 { + cpu = <&A53_3>; + }; + }; + }; + A57_0: cpu@0 { compatible = "arm,cortex-a57","arm,armv8"; reg = <0x0 0x0>; device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A57_L2>; + clocks = <&scpi_dvfs 0>; }; A57_1: cpu@1 { @@ -48,6 +75,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A57_L2>; + clocks = <&scpi_dvfs 0>; }; A53_0: cpu@100 { @@ -56,6 +84,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A53_1: cpu@101 { @@ -64,6 +93,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A53_2: cpu@102 { @@ -72,6 +102,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A53_3: cpu@103 { @@ -80,6 +111,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A57_L2: l2-cache0 { @@ -113,6 +145,26 @@ #include "juno-base.dtsi" + pcie-controller@40000000 { + compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic"; + device_type = "pci"; + reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */ + bus-range = <0 255>; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + dma-coherent; + ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>, + <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>, + <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>, + <0 0 0 2 &gic 0 0 0 137 4>, + <0 0 0 3 &gic 0 0 0 138 4>, + <0 0 0 4 &gic 0 0 0 139 4>; + msi-parent = <&v2m_0>; + }; }; &memtimer { diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index ffa05aeab3c7..53442b5ee4ff 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -34,12 +34,39 @@ #address-cells = <2>; #size-cells = <0>; + cpu-map { + cluster0 { + core0 { + cpu = <&A57_0>; + }; + core1 { + cpu = <&A57_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&A53_0>; + }; + core1 { + cpu = <&A53_1>; + }; + core2 { + cpu = <&A53_2>; + }; + core3 { + cpu = <&A53_3>; + }; + }; + }; + A57_0: cpu@0 { compatible = "arm,cortex-a57","arm,armv8"; reg = <0x0 0x0>; device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A57_L2>; + clocks = <&scpi_dvfs 0>; }; A57_1: cpu@1 { @@ -48,6 +75,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A57_L2>; + clocks = <&scpi_dvfs 0>; }; A53_0: cpu@100 { @@ -56,6 +84,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A53_1: cpu@101 { @@ -64,6 +93,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A53_2: cpu@102 { @@ -72,6 +102,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A53_3: cpu@103 { @@ -80,6 +111,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A57_L2: l2-cache0 { diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts index 5b1d0181023b..bb3c26d1154d 100644 --- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts +++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts @@ -186,6 +186,6 @@ <0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, <0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - /include/ "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi" + /include/ "vexpress-v2m-rs1.dtsi" }; }; diff --git a/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi b/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi new file mode 120000 index 000000000000..68fd0f8f1dee --- /dev/null +++ b/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi @@ -0,0 +1 @@ +../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi
\ No newline at end of file diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi index 2eef4a279131..f77ddaf21d04 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi @@ -586,3 +586,106 @@ samsung,pin-drv = <2>; }; }; + +&pinctrl_bus1 { + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf4: gpf4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf5: gpf5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv6: gpv6 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + spi5_bus: spi5-bus { + samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + ufs_refclk_out: ufs-refclk-out { + samsung,pins = "gpg2-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + ufs_rst_n: ufs-rst-n { + samsung,pins = "gph1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index d7a37c3a6b52..f9c5a549c2c0 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -26,6 +26,7 @@ pinctrl5 = &pinctrl_ese; pinctrl6 = &pinctrl_fsys0; pinctrl7 = &pinctrl_fsys1; + pinctrl8 = &pinctrl_bus1; }; cpus { @@ -278,6 +279,12 @@ interrupts = <0 203 0>; }; + pinctrl_bus1: pinctrl@14870000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x14870000 0x1000>; + interrupts = <0 384 0>; + }; + hsi2c_0: hsi2c@13640000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x13640000 0x1000>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 4f2de3e789ee..c4957a4aa5aa 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -1,4 +1,6 @@ -dtb-$(CONFIG_ARCH_FSL_LS2085A) += fsl-ls2085a-simu.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts new file mode 100644 index 000000000000..4cb996d6e686 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts @@ -0,0 +1,204 @@ +/* + * Device Tree file for Freescale LS2080a QDS Board. + * + * Copyright (C) 2015, Freescale Semiconductor + * + * Bhupesh Sharma <bhupesh.sharma@freescale.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +/include/ "fsl-ls2080a.dtsi" + +/ { + model = "Freescale Layerscape 2080a QDS Board"; + compatible = "fsl,ls2080a-qds", "fsl,ls2080a"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; + +}; + +&esdhc { + status = "okay"; +}; + +&ifc { + status = "okay"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x0 0x0 0x5 0x80000000 0x08000000 + 0x2 0x0 0x5 0x30000000 0x00010000 + 0x3 0x0 0x5 0x20000000 0x00010000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + cpld@3,0 { + reg = <0x3 0x0 0x10000>; + compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis"; + }; +}; + +&i2c0 { + status = "okay"; + pca9547@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x00>; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7481@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; +}; + +&i2c1 { + status = "disabled"; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + status = "disabled"; +}; + +&dspi { + status = "okay"; + dflash0: n25q128a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <3000000>; + reg = <0>; + }; + dflash1: sst25wf040b { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <3000000>; + reg = <1>; + }; + dflash2: en25s64 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <3000000>; + reg = <2>; + }; +}; + +&qspi { + status = "okay"; + qflash0: s25fl008k { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts new file mode 100644 index 000000000000..e127f0baab19 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts @@ -0,0 +1,166 @@ +/* + * Device Tree file for Freescale LS2080a RDB Board. + * + * Copyright (C) 2015, Freescale Semiconductor + * + * Bhupesh Sharma <bhupesh.sharma@freescale.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +/include/ "fsl-ls2080a.dtsi" + +/ { + model = "Freescale Layerscape 2080a RDB Board"; + compatible = "fsl,ls2080a-rdb", "fsl,ls2080a"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; +}; + +&esdhc { + status = "okay"; +}; + +&ifc { + status = "okay"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x0 0x0 0x5 0x80000000 0x08000000 + 0x2 0x0 0x5 0x30000000 0x00010000 + 0x3 0x0 0x5 0x20000000 0x00010000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + cpld@3,0 { + reg = <0x3 0x0 0x10000>; + compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis"; + }; + +}; + +&i2c0 { + status = "okay"; + pca9547@75 { + compatible = "nxp,pca9547"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x01>; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7481@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; +}; + +&i2c1 { + status = "disabled"; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + status = "disabled"; +}; + +&dspi { + status = "okay"; + dflash0: n25q512a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <3000000>; + reg = <0>; + }; +}; + +&qspi { + status = "disabled"; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts index 82e2a6fccc64..505d038078a3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts @@ -1,7 +1,7 @@ /* - * Device Tree file for Freescale LS2085a software Simulator model + * Device Tree file for Freescale LS2080a software Simulator model * - * Copyright (C) 2014, Freescale Semiconductor + * Copyright (C) 2014-2015, Freescale Semiconductor * * Bhupesh Sharma <bhupesh.sharma@freescale.com> * @@ -20,11 +20,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -51,11 +46,16 @@ /dts-v1/; -/include/ "fsl-ls2085a.dtsi" +/include/ "fsl-ls2080a.dtsi" / { - model = "Freescale Layerscape 2085a software Simulator model"; - compatible = "fsl,ls2085a-simu", "fsl,ls2085a"; + model = "Freescale Layerscape 2080a software Simulator model"; + compatible = "fsl,ls2080a-simu", "fsl,ls2080a"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; ethernet@2210000 { compatible = "smsc,lan91c111"; @@ -63,3 +63,8 @@ interrupts = <0 58 0x1>; }; }; + +&ifc { + status = "okay"; +}; + diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi new file mode 100644 index 000000000000..e81cd48d6245 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -0,0 +1,515 @@ +/* + * Device Tree Include file for Freescale Layerscape-2080A family SoC. + * + * Copyright (C) 2014-2015, Freescale Semiconductor + * + * Bhupesh Sharma <bhupesh.sharma@freescale.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + compatible = "fsl,ls2080a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + /* + * We expect the enable-method for cpu's to be "psci", but this + * is dependent on the SoC FW, which will fill this in. + * + * Currently supported enable-method is psci v0.2 + */ + + /* We have 4 clusters having 2 Cortex-A57 cores each */ + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x0>; + clocks = <&clockgen 1 0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x1>; + clocks = <&clockgen 1 0>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + clocks = <&clockgen 1 1>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + clocks = <&clockgen 1 1>; + }; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x200>; + clocks = <&clockgen 1 2>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x201>; + clocks = <&clockgen 1 2>; + }; + + cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x300>; + clocks = <&clockgen 1 3>; + }; + + cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x301>; + clocks = <&clockgen 1 3>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>; + /* DRAM space - 1, size : 2 GB DRAM */ + }; + + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + + gic: interrupt-controller@6000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */ + <0x0 0x0c0c0000 0 0x2000>, /* GICC */ + <0x0 0x0c0d0000 0 0x1000>, /* GICH */ + <0x0 0x0c0e0000 0 0x20000>; /* GICV */ + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + interrupts = <1 9 0x4>; + + its: gic-its@6020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x6020000 0 0x20000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ + <1 14 0x8>, /* Physical Non-Secure PPI, active-low */ + <1 11 0x8>, /* Virtual PPI, active-low */ + <1 10 0x8>; /* Hypervisor PPI, active-low */ + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <1 7 0x8>; /* PMU PPI, Level low type */ + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clockgen: clocking@1300000 { + compatible = "fsl,ls2080a-clockgen"; + reg = <0 0x1300000 0 0xa0000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + serial0: serial@21c0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 32 0x4>; /* Level high type */ + }; + + serial1: serial@21c0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 32 0x4>; /* Level high type */ + }; + + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + }; + + smmu: iommu@5000000 { + compatible = "arm,mmu-500"; + reg = <0 0x5000000 0 0x800000>; + #global-interrupts = <12>; + interrupts = <0 13 4>, /* global secure fault */ + <0 14 4>, /* combined secure interrupt */ + <0 15 4>, /* global non-secure fault */ + <0 16 4>, /* combined non-secure interrupt */ + /* performance counter interrupts 0-7 */ + <0 211 4>, <0 212 4>, + <0 213 4>, <0 214 4>, + <0 215 4>, <0 216 4>, + <0 217 4>, <0 218 4>, + /* per context interrupt, 64 interrupts */ + <0 146 4>, <0 147 4>, + <0 148 4>, <0 149 4>, + <0 150 4>, <0 151 4>, + <0 152 4>, <0 153 4>, + <0 154 4>, <0 155 4>, + <0 156 4>, <0 157 4>, + <0 158 4>, <0 159 4>, + <0 160 4>, <0 161 4>, + <0 162 4>, <0 163 4>, + <0 164 4>, <0 165 4>, + <0 166 4>, <0 167 4>, + <0 168 4>, <0 169 4>, + <0 170 4>, <0 171 4>, + <0 172 4>, <0 173 4>, + <0 174 4>, <0 175 4>, + <0 176 4>, <0 177 4>, + <0 178 4>, <0 179 4>, + <0 180 4>, <0 181 4>, + <0 182 4>, <0 183 4>, + <0 184 4>, <0 185 4>, + <0 186 4>, <0 187 4>, + <0 188 4>, <0 189 4>, + <0 190 4>, <0 191 4>, + <0 192 4>, <0 193 4>, + <0 194 4>, <0 195 4>, + <0 196 4>, <0 197 4>, + <0 198 4>, <0 199 4>, + <0 200 4>, <0 201 4>, + <0 202 4>, <0 203 4>, + <0 204 4>, <0 205 4>, + <0 206 4>, <0 207 4>, + <0 208 4>, <0 209 4>; + mmu-masters = <&fsl_mc 0x300 0>; + }; + + dspi: dspi@2100000 { + status = "disabled"; + compatible = "fsl,vf610-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <0 26 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <0>; + }; + + esdhc: esdhc@2140000 { + status = "disabled"; + compatible = "fsl,ls2080a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2140000 0x0 0x10000>; + interrupts = <0 28 0x4>; /* Level high type */ + clock-frequency = <0>; /* Updated by bootloader */ + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + bus-width = <4>; + }; + + gpio0: gpio@2300000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <0 36 0x4>; /* Level high type */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@2310000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = <0 36 0x4>; /* Level high type */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2320000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2320000 0x0 0x10000>; + interrupts = <0 37 0x4>; /* Level high type */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@2330000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2330000 0x0 0x10000>; + interrupts = <0 37 0x4>; /* Level high type */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2c0: i2c@2000000 { + status = "disabled"; + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts = <0 34 0x4>; /* Level high type */ + clock-names = "i2c"; + clocks = <&clockgen 4 3>; + }; + + i2c1: i2c@2010000 { + status = "disabled"; + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2010000 0x0 0x10000>; + interrupts = <0 34 0x4>; /* Level high type */ + clock-names = "i2c"; + clocks = <&clockgen 4 3>; + }; + + i2c2: i2c@2020000 { + status = "disabled"; + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2020000 0x0 0x10000>; + interrupts = <0 35 0x4>; /* Level high type */ + clock-names = "i2c"; + clocks = <&clockgen 4 3>; + }; + + i2c3: i2c@2030000 { + status = "disabled"; + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2030000 0x0 0x10000>; + interrupts = <0 35 0x4>; /* Level high type */ + clock-names = "i2c"; + clocks = <&clockgen 4 3>; + }; + + ifc: ifc@2240000 { + compatible = "fsl,ifc", "simple-bus"; + reg = <0x0 0x2240000 0x0 0x20000>; + interrupts = <0 21 0x4>; /* Level high type */ + little-endian; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0x5 0x80000000 0x08000000 + 2 0 0x5 0x30000000 0x00010000 + 3 0 0x5 0x20000000 0x00010000>; + }; + + qspi: quadspi@20c0000 { + status = "disabled"; + compatible = "fsl,vf610-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <0 25 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "qspi_en", "qspi"; + }; + + pcie@3400000 { + compatible = "fsl,ls2080a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ + 0x10 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 108 0x4>; /* Level high type */ + interrupt-names = "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>, + <0000 0 0 2 &gic 0 0 0 110 4>, + <0000 0 0 3 &gic 0 0 0 111 4>, + <0000 0 0 4 &gic 0 0 0 112 4>; + }; + + pcie@3500000 { + compatible = "fsl,ls2080a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ + 0x12 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 113 0x4>; /* Level high type */ + interrupt-names = "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>, + <0000 0 0 2 &gic 0 0 0 115 4>, + <0000 0 0 3 &gic 0 0 0 116 4>, + <0000 0 0 4 &gic 0 0 0 117 4>; + }; + + pcie@3600000 { + compatible = "fsl,ls2080a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ + 0x14 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 118 0x4>; /* Level high type */ + interrupt-names = "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>, + <0000 0 0 2 &gic 0 0 0 120 4>, + <0000 0 0 3 &gic 0 0 0 121 4>, + <0000 0 0 4 &gic 0 0 0 122 4>; + }; + + pcie@3700000 { + compatible = "fsl,ls2080a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ + 0x16 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 123 0x4>; /* Level high type */ + interrupt-names = "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>, + <0000 0 0 2 &gic 0 0 0 125 4>, + <0000 0 0 3 &gic 0 0 0 126 4>, + <0000 0 0 4 &gic 0 0 0 127 4>; + }; + + sata0: sata@3200000 { + status = "disabled"; + compatible = "fsl,ls2080a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <0 133 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>; + }; + + sata1: sata@3210000 { + status = "disabled"; + compatible = "fsl,ls2080a-ahci"; + reg = <0x0 0x3210000 0x0 0x10000>; + interrupts = <0 136 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>; + }; + + usb0: usb3@3100000 { + status = "disabled"; + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 80 0x4>; /* Level high type */ + dr_mode = "host"; + }; + + usb1: usb3@3110000 { + status = "disabled"; + compatible = "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <0 81 0x4>; /* Level high type */ + dr_mode = "host"; + }; + + ccn@4000000 { + compatible = "arm,ccn-504"; + reg = <0x0 0x04000000 0x0 0x01000000>; + interrupts = <0 12 4>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi deleted file mode 100644 index e281ceb338c3..000000000000 --- a/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi +++ /dev/null @@ -1,163 +0,0 @@ -/* - * Device Tree Include file for Freescale Layerscape-2085A family SoC. - * - * Copyright (C) 2014, Freescale Semiconductor - * - * Bhupesh Sharma <bhupesh.sharma@freescale.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/ { - compatible = "fsl,ls2085a"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - /* - * We expect the enable-method for cpu's to be "psci", but this - * is dependent on the SoC FW, which will fill this in. - * - * Currently supported enable-method is psci v0.2 - */ - - /* We have 4 clusters having 2 Cortex-A57 cores each */ - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x0>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x1>; - }; - - cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x100>; - }; - - cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x101>; - }; - - cpu@200 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x200>; - }; - - cpu@201 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x201>; - }; - - cpu@300 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x300>; - }; - - cpu@301 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x301>; - }; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x00000000 0x80000000 0 0x80000000>; - /* DRAM space - 1, size : 2 GB DRAM */ - }; - - gic: interrupt-controller@6000000 { - compatible = "arm,gic-v3"; - reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ - <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */ - #interrupt-cells = <3>; - interrupt-controller; - interrupts = <1 9 0x4>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ - <1 14 0x8>, /* Physical Non-Secure PPI, active-low */ - <1 11 0x8>, /* Virtual PPI, active-low */ - <1 10 0x8>; /* Hypervisor PPI, active-low */ - }; - - serial0: serial@21c0500 { - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550a"; - reg = <0x0 0x21c0500 0x0 0x100>; - clock-frequency = <0>; /* Updated by bootloader */ - interrupts = <0 32 0x1>; /* edge triggered */ - }; - - serial1: serial@21c0600 { - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550a"; - reg = <0x0 0x21c0600 0x0 0x100>; - clock-frequency = <0>; /* Updated by bootloader */ - interrupts = <0 32 0x1>; /* edge triggered */ - }; - - fsl_mc: fsl-mc@80c000000 { - compatible = "fsl,qoriq-mc"; - reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ - <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ - }; -}; diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile index fa81a6ee6473..cd158b80e29b 100644 --- a/arch/arm64/boot/dts/hisilicon/Makefile +++ b/arch/arm64/boot/dts/hisilicon/Makefile @@ -1,4 +1,4 @@ -dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb +dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb hip05-d02.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index e36a539468a5..8d43a0fce522 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -17,11 +17,14 @@ compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220"; aliases { - serial0 = &uart0; + serial0 = &uart0; /* On board UART0 */ + serial1 = &uart1; /* BT UART */ + serial2 = &uart2; /* LS Expansion UART0 */ + serial3 = &uart3; /* LS Expansion UART1 */ }; chosen { - stdout-path = "serial0:115200n8"; + stdout-path = "serial3:115200n8"; }; memory@0 { diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 3f03380815b6..82d2488a0e86 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -5,6 +5,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/hi6220-clock.h> / { compatible = "hisilicon,hi6220"; @@ -164,8 +165,48 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xf8015000 0x0 0x1000>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ao_ctrl 36>, <&ao_ctrl 36>; + clocks = <&ao_ctrl HI6220_UART0_PCLK>, + <&ao_ctrl HI6220_UART0_PCLK>; clock-names = "uartclk", "apb_pclk"; }; + + uart1: uart@f7111000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xf7111000 0x0 0x1000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_ctrl HI6220_UART1_PCLK>, + <&sys_ctrl HI6220_UART1_PCLK>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + + uart2: uart@f7112000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xf7112000 0x0 0x1000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_ctrl HI6220_UART2_PCLK>, + <&sys_ctrl HI6220_UART2_PCLK>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + + uart3: uart@f7113000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xf7113000 0x0 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_ctrl HI6220_UART3_PCLK>, + <&sys_ctrl HI6220_UART3_PCLK>; + clock-names = "uartclk", "apb_pclk"; + }; + + uart4: uart@f7114000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xf7114000 0x0 0x1000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_ctrl HI6220_UART4_PCLK>, + <&sys_ctrl HI6220_UART4_PCLK>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts new file mode 100644 index 000000000000..ae34e250456f --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts @@ -0,0 +1,36 @@ +/** + * dts file for Hisilicon D02 Development Board + * + * Copyright (C) 2014,2015 Hisilicon Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + */ + +/dts-v1/; + +#include "hip05.dtsi" + +/ { + model = "Hisilicon Hip05 D02 Development Board"; + compatible = "hisilicon,hip05-d02"; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x00000000 0x0 0x80000000>; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi new file mode 100644 index 000000000000..4ff16d016e34 --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi @@ -0,0 +1,271 @@ +/** + * dts file for Hisilicon D02 Development Board + * + * Copyright (C) 2014,2015 Hisilicon Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "hisilicon,hip05-d02"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + cluster2 { + core0 { + cpu = <&cpu8>; + }; + core1 { + cpu = <&cpu9>; + }; + core2 { + cpu = <&cpu10>; + }; + core3 { + cpu = <&cpu11>; + }; + }; + cluster3 { + core0 { + cpu = <&cpu12>; + }; + core1 { + cpu = <&cpu13>; + }; + core2 { + cpu = <&cpu14>; + }; + core3 { + cpu = <&cpu15>; + }; + }; + }; + + cpu0: cpu@20000 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20000>; + enable-method = "psci"; + }; + + cpu1: cpu@20001 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20001>; + enable-method = "psci"; + }; + + cpu2: cpu@20002 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20002>; + enable-method = "psci"; + }; + + cpu3: cpu@20003 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20003>; + enable-method = "psci"; + }; + + cpu4: cpu@20100 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20100>; + enable-method = "psci"; + }; + + cpu5: cpu@20101 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20101>; + enable-method = "psci"; + }; + + cpu6: cpu@20102 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20102>; + enable-method = "psci"; + }; + + cpu7: cpu@20103 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20103>; + enable-method = "psci"; + }; + + cpu8: cpu@20200 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20200>; + enable-method = "psci"; + }; + + cpu9: cpu@20201 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20201>; + enable-method = "psci"; + }; + + cpu10: cpu@20202 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20202>; + enable-method = "psci"; + }; + + cpu11: cpu@20203 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20203>; + enable-method = "psci"; + }; + + cpu12: cpu@20300 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20300>; + enable-method = "psci"; + }; + + cpu13: cpu@20301 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20301>; + enable-method = "psci"; + }; + + cpu14: cpu@20302 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20302>; + enable-method = "psci"; + }; + + cpu15: cpu@20303 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20303>; + enable-method = "psci"; + }; + }; + + gic: interrupt-controller@8d000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x30000>; + reg = <0x0 0x8d000000 0 0x10000>, /* GICD */ + <0x0 0x8d100000 0 0x300000>, /* GICR */ + <0x0 0xfe000000 0 0x10000>, /* GICC */ + <0x0 0xfe010000 0 0x10000>, /* GICH */ + <0x0 0xfe020000 0 0x10000>; /* GICV */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + its_totems: interrupt-controller@8c000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x8c000000 0x0 0x40000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + refclk200mhz: refclk200mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + uart0: uart@80300000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x80300000 0x0 0x10000>; + interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&refclk200mhz>; + clock-names = "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: uart@80310000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x80310000 0x0 0x10000>; + interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&refclk200mhz>; + clock-names = "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index e2f6afa7f849..348f4db4f313 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -1,4 +1,5 @@ dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb +dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts new file mode 100644 index 000000000000..348c37ecf069 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2015 Marvell Technology Group Ltd. + * + * Author: Jisheng Zhang <jszhang@marvell.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "berlin4ct.dtsi" + +/ { + model = "Marvell BG4CT STB board"; + compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + /* the first 16MB is for firmwares' usage */ + reg = <0 0x01000000 0 0x7f000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi index dd4a10d605d9..a3b5f1d4a240 100644 --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi @@ -135,6 +135,96 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + apb@e80000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xe80000 0x10000>; + interrupt-parent = <&aic>; + + gpio0: gpio@0400 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0>; + }; + }; + + gpio1: gpio@0800 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portb: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <1>; + }; + }; + + gpio2: gpio@0c00 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portc: gpio-port@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <2>; + }; + }; + + gpio3: gpio@1000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x1000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portd: gpio-port@3 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <3>; + }; + }; + + aic: interrupt-controller@3800 { + compatible = "snps,dw-apb-ictl"; + reg = <0x3800 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; @@ -151,6 +241,36 @@ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; }; + sm_gpio0: gpio@8000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x8000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porte: gpio-port@4 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + + sm_gpio1: gpio@9000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x9000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portf: gpio-port@5 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + uart0: uart@d000 { compatible = "snps,dw-apb-uart"; reg = <0xd000 0x100>; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index 4be66cadbc7c..811cb760ba49 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -387,6 +387,24 @@ }; }; +&pio { + spi_pins_a: spi0 { + pins_spi { + pinmux = <MT8173_PIN_69_SPI_CK__FUNC_SPI_CK_0_>, + <MT8173_PIN_70_SPI_MI__FUNC_SPI_MI_0_>, + <MT8173_PIN_71_SPI_MO__FUNC_SPI_MO_0_>, + <MT8173_PIN_72_SPI_CS__FUNC_SPI_CS_0_>; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_a>; + mediatek,pad-select = <0>; + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 06a15644be38..4dd5f93d0303 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -116,6 +116,13 @@ clock-output-names = "clk32k"; }; + cpum_ck: oscillator@2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "cpum_ck"; + }; + timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; @@ -227,8 +234,10 @@ #power-domain-cells = <1>; reg = <0 0x10006000 0 0x1000>; clocks = <&clk26m>, - <&topckgen CLK_TOP_MM_SEL>; - clock-names = "mfg", "mm"; + <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_VENC_SEL>, + <&topckgen CLK_TOP_VENC_LT_SEL>; + clock-names = "mfg", "mm", "venc", "venc_lt"; infracfg = <&infracfg>; }; @@ -365,7 +374,20 @@ status = "disabled"; }; - i2c3: i2c3@11010000 { + spi: spi@1100a000 { + compatible = "mediatek,mt8173-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI_SEL>, + <&pericfg CLK_PERI_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + i2c3: i2c@11010000 { compatible = "mediatek,mt8173-i2c"; reg = <0 0x11010000 0 0x70>, <0 0x11000280 0 0x80>; @@ -381,7 +403,7 @@ status = "disabled"; }; - i2c4: i2c4@11011000 { + i2c4: i2c@11011000 { compatible = "mediatek,mt8173-i2c"; reg = <0 0x11011000 0 0x70>, <0 0x11000300 0 0x80>; @@ -397,7 +419,7 @@ status = "disabled"; }; - i2c6: i2c6@11013000 { + i2c6: i2c@11013000 { compatible = "mediatek,mt8173-i2c"; reg = <0 0x11013000 0 0x70>, <0 0x11000080 0 0x80>; @@ -487,6 +509,36 @@ clock-names = "source", "hclk"; status = "disabled"; }; + + mmsys: clock-controller@14000000 { + compatible = "mediatek,mt8173-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys: clock-controller@15000000 { + compatible = "mediatek,mt8173-imgsys", "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: clock-controller@16000000 { + compatible = "mediatek,mt8173-vdecsys", "syscon"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: clock-controller@18000000 { + compatible = "mediatek,mt8173-vencsys", "syscon"; + reg = <0 0x18000000 0 0x1000>; + #clock-cells = <1>; + }; + + vencltsys: clock-controller@19000000 { + compatible = "mediatek,mt8173-vencltsys", "syscon"; + reg = <0 0x19000000 0 0x1000>; + #clock-cells = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 66804ffbc6d2..6b8abbe68746 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -19,6 +19,7 @@ / { aliases { serial0 = &blsp1_uart2; + serial1 = &blsp1_uart1; }; chosen { @@ -33,6 +34,31 @@ pinctrl-1 = <&blsp1_uart2_sleep>; }; + i2c@78b6000 { + /* On Low speed expansion */ + status = "okay"; + }; + + i2c@78b8000 { + /* On High speed expansion */ + status = "okay"; + }; + + i2c@78ba000 { + /* On Low speed expansion */ + status = "okay"; + }; + + spi@78b7000 { + /* On High speed expansion */ + status = "okay"; + }; + + spi@78b9000 { + /* On Low speed expansion */ + status = "okay"; + }; + leds { pinctrl-names = "default"; pinctrl-0 = <&msmgpio_leds>, @@ -85,3 +111,7 @@ }; }; }; + +&sdhc_1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 568956859088..49ec55a37614 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -13,6 +13,30 @@ &msmgpio { + blsp1_uart1_default: blsp1_uart1_default { + pinmux { + function = "blsp_uart1"; + pins = "gpio0", "gpio1"; + }; + pinconf { + pins = "gpio0", "gpio1"; + drive-strength = <16>; + bias-disable; + }; + }; + + blsp1_uart1_sleep: blsp1_uart1_sleep { + pinmux { + function = "gpio"; + pins = "gpio0", "gpio1"; + }; + pinconf { + pins = "gpio0", "gpio1"; + drive-strength = <2>; + bias-pull-down; + }; + }; + blsp1_uart2_default: blsp1_uart2_default { pinmux { function = "blsp_uart2"; @@ -27,7 +51,7 @@ blsp1_uart2_sleep: blsp1_uart2_sleep { pinmux { - function = "blsp_uart2"; + function = "gpio"; pins = "gpio4", "gpio5"; }; pinconf { @@ -241,6 +265,30 @@ }; }; + i2c2_default: i2c2_default { + pinmux { + function = "blsp_i2c2"; + pins = "gpio6", "gpio7"; + }; + pinconf { + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + i2c2_sleep: i2c2_sleep { + pinmux { + function = "gpio"; + pins = "gpio6", "gpio7"; + }; + pinconf { + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + i2c4_default: i2c4_default { pinmux { function = "blsp_i2c4"; @@ -255,7 +303,7 @@ i2c4_sleep: i2c4_sleep { pinmux { - function = "blsp_i2c4"; + function = "gpio"; pins = "gpio14", "gpio15"; }; pinconf { @@ -265,6 +313,30 @@ }; }; + i2c6_default: i2c6_default { + pinmux { + function = "blsp_i2c6"; + pins = "gpio22", "gpio23"; + }; + pinconf { + pins = "gpio22", "gpio23"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + i2c6_sleep: i2c6_sleep { + pinmux { + function = "gpio"; + pins = "gpio22", "gpio23"; + }; + pinconf { + pins = "gpio22", "gpio23"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + sdhc2_cd_pin { sdc2_cd_on: cd_on { pinmux { diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 5911de008dd5..8d184ff19642 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -99,9 +99,19 @@ compatible = "qcom,gcc-msm8916"; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; reg = <0x1800000 0x80000>; }; + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78af000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp1_uart2: serial@78b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x78b0000 0x200>; @@ -224,6 +234,21 @@ status = "disabled"; }; + blsp_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b6000 0x1000>; + interrupts = <GIC_SPI 96 0>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_default>; + pinctrl-1 = <&i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + blsp_i2c4: i2c@78b8000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b8000 0x1000>; @@ -239,6 +264,21 @@ status = "disabled"; }; + blsp_i2c6: i2c@78ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78ba000 0x1000>; + interrupts = <GIC_SPI 100 0>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_default>; + pinctrl-1 = <&i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sdhc_1: sdhci@07824000 { compatible = "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; @@ -390,6 +430,13 @@ interrupt-controller; #interrupt-cells = <4>; }; + + rng@22000 { + compatible = "qcom,prng"; + reg = <0x00022000 0x200>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; }; }; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 5f760347aee2..bdd7aa358d2a 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -34,11 +34,12 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_BCM_IPROC=y CONFIG_ARCH_BERLIN=y CONFIG_ARCH_EXYNOS7=y -CONFIG_ARCH_FSL_LS2085A=y +CONFIG_ARCH_LAYERSCAPE=y CONFIG_ARCH_HISI=y CONFIG_ARCH_MEDIATEK=y CONFIG_ARCH_ROCKCHIP=y CONFIG_ARCH_SEATTLE=y +CONFIG_ARCH_STRATIX10=y CONFIG_ARCH_TEGRA=y CONFIG_ARCH_TEGRA_132_SOC=y CONFIG_ARCH_QCOM=y @@ -49,6 +50,7 @@ CONFIG_ARCH_XGENE=y CONFIG_ARCH_ZYNQMP=y CONFIG_PCI=y CONFIG_PCI_MSI=y +CONFIG_PCI_HOST_GENERIC=y CONFIG_PCI_XGENE=y CONFIG_SMP=y CONFIG_SCHED_MC=y @@ -121,8 +123,11 @@ CONFIG_SERIAL_XILINX_PS_UART=y CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y CONFIG_VIRTIO_CONSOLE=y # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_QUP=y CONFIG_SPI=y CONFIG_SPI_PL022=y +CONFIG_SPI_QUP=y CONFIG_PINCTRL_MSM8916=y CONFIG_GPIO_PL061=y CONFIG_GPIO_XGENE=y @@ -131,6 +136,7 @@ CONFIG_POWER_RESET_SYSCON=y # CONFIG_HWMON is not set CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_QCOM_SMD_RPM=y CONFIG_FB=y CONFIG_FB_ARMCLCD=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -163,12 +169,18 @@ CONFIG_LEDS_TRIGGER_CPU=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_EFI=y CONFIG_RTC_DRV_XGENE=y +CONFIG_DMADEVICES=y +CONFIG_QCOM_BAM_DMA=y CONFIG_VIRTIO_PCI=y CONFIG_VIRTIO_BALLOON=y CONFIG_VIRTIO_MMIO=y CONFIG_COMMON_CLK_QCOM=y CONFIG_MSM_GCC_8916=y +CONFIG_HWSPINLOCK_QCOM=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_QCOM_SMEM=y +CONFIG_QCOM_SMD=y +CONFIG_QCOM_SMD_RPM=y CONFIG_PHY_XGENE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y @@ -212,3 +224,4 @@ CONFIG_CRYPTO_GHASH_ARM64_CE=y CONFIG_CRYPTO_AES_ARM64_CE_CCM=y CONFIG_CRYPTO_AES_ARM64_CE_BLK=y CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y +CONFIG_CRYPTO_CRC32_ARM64=y diff --git a/arch/arm64/include/asm/atomic_ll_sc.h b/arch/arm64/include/asm/atomic_ll_sc.h index 74d0b8eb0799..f61c84f6ba02 100644 --- a/arch/arm64/include/asm/atomic_ll_sc.h +++ b/arch/arm64/include/asm/atomic_ll_sc.h @@ -233,7 +233,7 @@ __CMPXCHG_CASE( , , mb_8, dmb ish, , l, "memory") #undef __CMPXCHG_CASE #define __CMPXCHG_DBL(name, mb, rel, cl) \ -__LL_SC_INLINE int \ +__LL_SC_INLINE long \ __LL_SC_PREFIX(__cmpxchg_double##name(unsigned long old1, \ unsigned long old2, \ unsigned long new1, \ diff --git a/arch/arm64/include/asm/atomic_lse.h b/arch/arm64/include/asm/atomic_lse.h index 1fce7908e690..197e06afbf71 100644 --- a/arch/arm64/include/asm/atomic_lse.h +++ b/arch/arm64/include/asm/atomic_lse.h @@ -387,7 +387,7 @@ __CMPXCHG_CASE(x, , mb_8, al, "memory") #define __LL_SC_CMPXCHG_DBL(op) __LL_SC_CALL(__cmpxchg_double##op) #define __CMPXCHG_DBL(name, mb, cl...) \ -static inline int __cmpxchg_double##name(unsigned long old1, \ +static inline long __cmpxchg_double##name(unsigned long old1, \ unsigned long old2, \ unsigned long new1, \ unsigned long new2, \ diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index f3acf421ded4..9819a9426b69 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -80,6 +80,7 @@ extern void __pgd_error(const char *file, int line, unsigned long val); #define _PAGE_DEFAULT (PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL)) #define PAGE_KERNEL __pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE) +#define PAGE_KERNEL_RO __pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_RDONLY) #define PAGE_KERNEL_EXEC __pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE) #define PAGE_KERNEL_EXEC_CONT __pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_CONT) diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h index 0cd7b5947dfc..2d4ca4bb0dd3 100644 --- a/arch/arm64/include/uapi/asm/kvm.h +++ b/arch/arm64/include/uapi/asm/kvm.h @@ -32,7 +32,7 @@ #ifndef __ASSEMBLY__ #include <linux/psci.h> -#include <asm/types.h> +#include <linux/types.h> #include <asm/ptrace.h> #define __KVM_HAVE_GUEST_DEBUG diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 52f0d7a5a1c2..c8cf89223b5a 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -696,7 +696,7 @@ static void cap_set_hwcap(const struct arm64_cpu_capabilities *cap) } /* Check if we have a particular HWCAP enabled */ -static bool cpus_have_hwcap(const struct arm64_cpu_capabilities *cap) +static bool __maybe_unused cpus_have_hwcap(const struct arm64_cpu_capabilities *cap) { bool rc; diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c index aa94a88f6279..f67f35b6edb1 100644 --- a/arch/arm64/kernel/psci.c +++ b/arch/arm64/kernel/psci.c @@ -30,20 +30,6 @@ #include <asm/smp_plat.h> #include <asm/suspend.h> -static bool psci_power_state_loses_context(u32 state) -{ - return state & PSCI_0_2_POWER_STATE_TYPE_MASK; -} - -static bool psci_power_state_is_valid(u32 state) -{ - const u32 valid_mask = PSCI_0_2_POWER_STATE_ID_MASK | - PSCI_0_2_POWER_STATE_TYPE_MASK | - PSCI_0_2_POWER_STATE_AFFL_MASK; - - return !(state & ~valid_mask); -} - static DEFINE_PER_CPU_READ_MOSTLY(u32 *, psci_power_state); static int __maybe_unused cpu_psci_cpu_init_idle(unsigned int cpu) diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index 2bbdc0e4fd14..b1adc51b2c2e 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -473,7 +473,7 @@ acpi_parse_gic_cpu_interface(struct acpi_subtable_header *header, * cpu logical map array containing MPIDR values related to logical * cpus. Assumes that cpu_logical_map(0) has already been initialized. */ -void __init of_parse_and_init_cpus(void) +static void __init of_parse_and_init_cpus(void) { struct device_node *dn = NULL; diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c index 40f7b33a22da..fce95e17cf7f 100644 --- a/arch/arm64/kernel/suspend.c +++ b/arch/arm64/kernel/suspend.c @@ -41,7 +41,7 @@ void notrace __cpu_suspend_save(struct cpu_suspend_ctx *ptr, * time the notifier runs debug exceptions might have been enabled already, * with HW breakpoints registers content still in an unknown state. */ -void (*hw_breakpoint_restore)(void *); +static void (*hw_breakpoint_restore)(void *); void __init cpu_suspend_set_dbg_restorer(void (*hw_bp_restore)(void *)) { /* Prevent multiple restore hook initializations */ diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile index f6fe17d88da5..b467fd0a384b 100644 --- a/arch/arm64/kernel/vdso/Makefile +++ b/arch/arm64/kernel/vdso/Makefile @@ -15,6 +15,9 @@ ccflags-y := -shared -fno-common -fno-builtin ccflags-y += -nostdlib -Wl,-soname=linux-vdso.so.1 \ $(call cc-ldoption, -Wl$(comma)--hash-style=sysv) +# Disable gcov profiling for VDSO code +GCOV_PROFILE := n + # Workaround for bare-metal (ELF) toolchains that neglect to pass -shared # down to collect2, resulting in silent corruption of the vDSO image. ccflags-y += -Wl,-shared diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index c2fa6b56613c..e3f563c81c48 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -146,7 +146,7 @@ static void alloc_init_pte(pmd_t *pmd, unsigned long addr, if (((addr | next | phys) & ~CONT_MASK) == 0) { /* a block of CONT_PTES */ __populate_init_pte(pte, addr, next, phys, - prot | __pgprot(PTE_CONT)); + __pgprot(pgprot_val(prot) | PTE_CONT)); } else { /* * If the range being split is already inside of a @@ -165,7 +165,7 @@ static void alloc_init_pte(pmd_t *pmd, unsigned long addr, } while (addr != end); } -void split_pud(pud_t *old_pud, pmd_t *pmd) +static void split_pud(pud_t *old_pud, pmd_t *pmd) { unsigned long addr = pud_pfn(*old_pud) << PAGE_SHIFT; pgprot_t prot = __pgprot(pud_val(*old_pud) ^ addr); @@ -447,7 +447,7 @@ static void __init map_mem(void) memblock_set_current_limit(MEMBLOCK_ALLOC_ANYWHERE); } -void __init fixup_executable(void) +static void __init fixup_executable(void) { #ifdef CONFIG_DEBUG_RODATA /* now that we are actually fully mapped, make the start/end more fine grained */ @@ -691,7 +691,7 @@ void __set_fixmap(enum fixed_addresses idx, void *__init fixmap_remap_fdt(phys_addr_t dt_phys) { const u64 dt_virt_base = __fix_to_virt(FIX_FDT); - pgprot_t prot = PAGE_KERNEL | PTE_RDONLY; + pgprot_t prot = PAGE_KERNEL_RO; int size, offset; void *dt_virt; diff --git a/arch/arm64/net/bpf_jit.h b/arch/arm64/net/bpf_jit.h index 98a26ce82d26..aee5637ea436 100644 --- a/arch/arm64/net/bpf_jit.h +++ b/arch/arm64/net/bpf_jit.h @@ -1,7 +1,7 @@ /* * BPF JIT compiler for ARM64 * - * Copyright (C) 2014 Zi Shen Lim <zlim.lnx@gmail.com> + * Copyright (C) 2014-2015 Zi Shen Lim <zlim.lnx@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -35,6 +35,7 @@ aarch64_insn_gen_comp_branch_imm(0, offset, Rt, A64_VARIANT(sf), \ AARCH64_INSN_BRANCH_COMP_##type) #define A64_CBZ(sf, Rt, imm19) A64_COMP_BRANCH(sf, Rt, (imm19) << 2, ZERO) +#define A64_CBNZ(sf, Rt, imm19) A64_COMP_BRANCH(sf, Rt, (imm19) << 2, NONZERO) /* Conditional branch (immediate) */ #define A64_COND_BRANCH(cond, offset) \ diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c index a44e5293c6f5..d6a53ef2350b 100644 --- a/arch/arm64/net/bpf_jit_comp.c +++ b/arch/arm64/net/bpf_jit_comp.c @@ -1,7 +1,7 @@ /* * BPF JIT compiler for ARM64 * - * Copyright (C) 2014 Zi Shen Lim <zlim.lnx@gmail.com> + * Copyright (C) 2014-2015 Zi Shen Lim <zlim.lnx@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -50,7 +50,7 @@ static const int bpf2a64[] = { [BPF_REG_8] = A64_R(21), [BPF_REG_9] = A64_R(22), /* read-only frame pointer to access stack */ - [BPF_REG_FP] = A64_FP, + [BPF_REG_FP] = A64_R(25), /* temporary register for internal BPF JIT */ [TMP_REG_1] = A64_R(23), [TMP_REG_2] = A64_R(24), @@ -155,18 +155,49 @@ static void build_prologue(struct jit_ctx *ctx) stack_size += 4; /* extra for skb_copy_bits buffer */ stack_size = STACK_ALIGN(stack_size); + /* + * BPF prog stack layout + * + * high + * original A64_SP => 0:+-----+ BPF prologue + * |FP/LR| + * current A64_FP => -16:+-----+ + * | ... | callee saved registers + * +-----+ + * | | x25/x26 + * BPF fp register => -80:+-----+ + * | | + * | ... | BPF prog stack + * | | + * | | + * current A64_SP => +-----+ + * | | + * | ... | Function call stack + * | | + * +-----+ + * low + * + */ + + /* Save FP and LR registers to stay align with ARM64 AAPCS */ + emit(A64_PUSH(A64_FP, A64_LR, A64_SP), ctx); + emit(A64_MOV(1, A64_FP, A64_SP), ctx); + /* Save callee-saved register */ emit(A64_PUSH(r6, r7, A64_SP), ctx); emit(A64_PUSH(r8, r9, A64_SP), ctx); if (ctx->tmp_used) emit(A64_PUSH(tmp1, tmp2, A64_SP), ctx); - /* Set up BPF stack */ - emit(A64_SUB_I(1, A64_SP, A64_SP, stack_size), ctx); + /* Save fp (x25) and x26. SP requires 16 bytes alignment */ + emit(A64_PUSH(fp, A64_R(26), A64_SP), ctx); - /* Set up frame pointer */ + /* Set up BPF prog stack base register (x25) */ emit(A64_MOV(1, fp, A64_SP), ctx); + /* Set up function call stack */ + emit(A64_SUB_I(1, A64_SP, A64_SP, stack_size), ctx); + /* Clear registers A and X */ emit_a64_mov_i64(ra, 0, ctx); emit_a64_mov_i64(rx, 0, ctx); @@ -190,14 +221,17 @@ static void build_epilogue(struct jit_ctx *ctx) /* We're done with BPF stack */ emit(A64_ADD_I(1, A64_SP, A64_SP, stack_size), ctx); + /* Restore fs (x25) and x26 */ + emit(A64_POP(fp, A64_R(26), A64_SP), ctx); + /* Restore callee-saved register */ if (ctx->tmp_used) emit(A64_POP(tmp1, tmp2, A64_SP), ctx); emit(A64_POP(r8, r9, A64_SP), ctx); emit(A64_POP(r6, r7, A64_SP), ctx); - /* Restore frame pointer */ - emit(A64_MOV(1, fp, A64_SP), ctx); + /* Restore FP/LR registers */ + emit(A64_POP(A64_FP, A64_LR, A64_SP), ctx); /* Set return value */ emit(A64_MOV(1, A64_R(0), r0), ctx); @@ -225,6 +259,17 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx) u8 jmp_cond; s32 jmp_offset; +#define check_imm(bits, imm) do { \ + if ((((imm) > 0) && ((imm) >> (bits))) || \ + (((imm) < 0) && (~(imm) >> (bits)))) { \ + pr_info("[%2d] imm=%d(0x%x) out of range\n", \ + i, imm, imm); \ + return -EINVAL; \ + } \ +} while (0) +#define check_imm19(imm) check_imm(19, imm) +#define check_imm26(imm) check_imm(26, imm) + switch (code) { /* dst = src */ case BPF_ALU | BPF_MOV | BPF_X: @@ -258,15 +303,33 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx) break; case BPF_ALU | BPF_DIV | BPF_X: case BPF_ALU64 | BPF_DIV | BPF_X: - emit(A64_UDIV(is64, dst, dst, src), ctx); - break; case BPF_ALU | BPF_MOD | BPF_X: case BPF_ALU64 | BPF_MOD | BPF_X: - ctx->tmp_used = 1; - emit(A64_UDIV(is64, tmp, dst, src), ctx); - emit(A64_MUL(is64, tmp, tmp, src), ctx); - emit(A64_SUB(is64, dst, dst, tmp), ctx); + { + const u8 r0 = bpf2a64[BPF_REG_0]; + + /* if (src == 0) return 0 */ + jmp_offset = 3; /* skip ahead to else path */ + check_imm19(jmp_offset); + emit(A64_CBNZ(is64, src, jmp_offset), ctx); + emit(A64_MOVZ(1, r0, 0, 0), ctx); + jmp_offset = epilogue_offset(ctx); + check_imm26(jmp_offset); + emit(A64_B(jmp_offset), ctx); + /* else */ + switch (BPF_OP(code)) { + case BPF_DIV: + emit(A64_UDIV(is64, dst, dst, src), ctx); + break; + case BPF_MOD: + ctx->tmp_used = 1; + emit(A64_UDIV(is64, tmp, dst, src), ctx); + emit(A64_MUL(is64, tmp, tmp, src), ctx); + emit(A64_SUB(is64, dst, dst, tmp), ctx); + break; + } break; + } case BPF_ALU | BPF_LSH | BPF_X: case BPF_ALU64 | BPF_LSH | BPF_X: emit(A64_LSLV(is64, dst, dst, src), ctx); @@ -393,17 +456,6 @@ emit_bswap_uxt: emit(A64_ASR(is64, dst, dst, imm), ctx); break; -#define check_imm(bits, imm) do { \ - if ((((imm) > 0) && ((imm) >> (bits))) || \ - (((imm) < 0) && (~(imm) >> (bits)))) { \ - pr_info("[%2d] imm=%d(0x%x) out of range\n", \ - i, imm, imm); \ - return -EINVAL; \ - } \ -} while (0) -#define check_imm19(imm) check_imm(19, imm) -#define check_imm26(imm) check_imm(26, imm) - /* JUMP off */ case BPF_JMP | BPF_JA: jmp_offset = bpf2a64_offset(i + off, i, ctx); @@ -740,7 +792,7 @@ void bpf_int_jit_compile(struct bpf_prog *prog) if (bpf_jit_enable > 1) bpf_jit_dump(prog->len, image_size, 2, ctx.image); - bpf_flush_icache(ctx.image, ctx.image + ctx.idx); + bpf_flush_icache(header, ctx.image + ctx.idx); set_memory_ro((unsigned long)header, header->pages); prog->bpf_func = (void *)ctx.image; diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 1d8b147282cf..b4cb3bd89d8a 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -603,18 +603,11 @@ static void __init genclk_init_parent(struct clk *clk) clk->parent = parent; } -static struct dw_dma_platform_data dw_dmac0_data = { - .nr_channels = 3, - .block_size = 4095U, - .nr_masters = 2, - .data_width = { 2, 2 }, -}; - static struct resource dw_dmac0_resource[] = { PBMEM(0xff200000), IRQ(2), }; -DEFINE_DEV_DATA(dw_dmac, 0); +DEFINE_DEV(dw_dmac, 0); DEV_CLK(hclk, dw_dmac0, hsb, 10); /* -------------------------------------------------------------------- diff --git a/arch/frv/include/asm/highmem.h b/arch/frv/include/asm/highmem.h index b3adc93611f3..1f58938703ab 100644 --- a/arch/frv/include/asm/highmem.h +++ b/arch/frv/include/asm/highmem.h @@ -62,8 +62,6 @@ extern void kunmap_high(struct page *page); extern void *kmap(struct page *page); extern void kunmap(struct page *page); -extern struct page *kmap_atomic_to_page(void *ptr); - #endif /* !__ASSEMBLY__ */ /* diff --git a/arch/frv/mm/highmem.c b/arch/frv/mm/highmem.c index 785344bbdc07..45750fb65c49 100644 --- a/arch/frv/mm/highmem.c +++ b/arch/frv/mm/highmem.c @@ -32,11 +32,6 @@ void kunmap(struct page *page) EXPORT_SYMBOL(kunmap); -struct page *kmap_atomic_to_page(void *ptr) -{ - return virt_to_page(ptr); -} - void *kmap_atomic(struct page *page) { unsigned long paddr; diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index db589167838c..dd3ac75776ad 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -16,6 +16,7 @@ config H8300 select OF_EARLY_FLATTREE select HAVE_MEMBLOCK select HAVE_DMA_ATTRS + select CLKSRC_OF config RWSEM_GENERIC_SPINLOCK def_bool y diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile index 0d2d96e52d9f..e1c02ca230cb 100644 --- a/arch/h8300/Makefile +++ b/arch/h8300/Makefile @@ -22,7 +22,9 @@ KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\" KBUILD_AFLAGS += $(aflags-y) LDFLAGS += $(ldflags-y) +ifeq ($(CROSS_COMPILE),) CROSS_COMPILE := h8300-unknown-linux- +endif core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ ifneq '$(CONFIG_H8300_BUILTIN_DTB)' '""' diff --git a/arch/h8300/boot/compressed/Makefile b/arch/h8300/boot/compressed/Makefile index 87d03b7ee97e..d7bc3fa7f2c6 100644 --- a/arch/h8300/boot/compressed/Makefile +++ b/arch/h8300/boot/compressed/Makefile @@ -14,11 +14,12 @@ OBJECTS = $(obj)/head.o $(obj)/misc.o # in order to suppress error message. # CONFIG_MEMORY_START ?= 0x00400000 -CONFIG_BOOT_LINK_OFFSET ?= 0x00140000 +CONFIG_BOOT_LINK_OFFSET ?= 0x00280000 IMAGE_OFFSET := $(shell printf "0x%08x" $$(($(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET)))) LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) -LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -estartup $(obj)/vmlinux.lds +LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -estartup -T $(obj)/vmlinux.lds \ + --defsym output=$(CONFIG_MEMORY_START) $(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE $(call if_changed,ld) diff --git a/arch/h8300/boot/compressed/head.S b/arch/h8300/boot/compressed/head.S index 74c0d8cc40ba..0436350c1df5 100644 --- a/arch/h8300/boot/compressed/head.S +++ b/arch/h8300/boot/compressed/head.S @@ -9,8 +9,8 @@ .section .text..startup,"ax" .global startup startup: + mov.l #startup, sp mov.l er0, er4 - mov.l er0, sp mov.l #__sbss, er0 mov.l #__ebss, er1 sub.l er0, er1 @@ -24,7 +24,7 @@ startup: bne 1b jsr @decompress_kernel mov.l er4, er0 - jmp @0x400000 + jmp @output .align 9 fake_headers_as_bzImage: diff --git a/arch/h8300/boot/compressed/misc.c b/arch/h8300/boot/compressed/misc.c index c4f2cfcb117b..6029c5351895 100644 --- a/arch/h8300/boot/compressed/misc.c +++ b/arch/h8300/boot/compressed/misc.c @@ -28,7 +28,7 @@ static unsigned long free_mem_end_ptr; extern char input_data[]; extern int input_len; -static unsigned char *output; +extern char output[]; #define HEAP_SIZE 0x10000 @@ -56,15 +56,10 @@ void *memcpy(void *dest, const void *src, size_t n) static void error(char *x) { - while (1) ; /* Halt */ } -#define STACK_SIZE (4096) -long user_stack[STACK_SIZE]; -long *stack_start = &user_stack[STACK_SIZE]; - void decompress_kernel(void) { free_mem_ptr = (unsigned long)&_end; diff --git a/arch/h8300/boot/compressed/vmlinux.lds b/arch/h8300/boot/compressed/vmlinux.lds index a0a3a0ed54ef..44fd209db88a 100644 --- a/arch/h8300/boot/compressed/vmlinux.lds +++ b/arch/h8300/boot/compressed/vmlinux.lds @@ -27,6 +27,6 @@ SECTIONS *(.bss*) . = ALIGN(0x4) ; __ebss = . ; - __end = . ; } + _end = . ; } diff --git a/arch/h8300/boot/dts/edosk2674.dts b/arch/h8300/boot/dts/edosk2674.dts index dfb5c102f8da..4ce9fa874a57 100644 --- a/arch/h8300/boot/dts/edosk2674.dts +++ b/arch/h8300/boot/dts/edosk2674.dts @@ -7,7 +7,7 @@ chosen { bootargs = "console=ttySC2,38400"; - stdout-path = <&sci2>; + stdout-path = &sci2; }; aliases { serial0 = &sci0; @@ -25,13 +25,13 @@ compatible = "renesas,h8s2678-pll-clock"; clocks = <&xclk>; #clock-cells = <0>; - reg = <0xfee03b 2>, <0xfee045 2>; + reg = <0xffff3b 1>, <0xffff45 1>; }; core_clk: core_clk { compatible = "renesas,h8300-div-clock"; clocks = <&pllclk>; #clock-cells = <0>; - reg = <0xfee03b 2>; + reg = <0xffff3b 1>; renesas,width = <3>; }; fclk: fclk { diff --git a/arch/h8300/include/asm/io.h b/arch/h8300/include/asm/io.h index 1d09b2f2e0fe..bb837cded268 100644 --- a/arch/h8300/include/asm/io.h +++ b/arch/h8300/include/asm/io.h @@ -36,20 +36,20 @@ static inline void ctrl_outl(unsigned long b, unsigned long addr) *(volatile unsigned long *)addr = b; } -static inline void ctrl_bclr(int b, unsigned long addr) +static inline void ctrl_bclr(int b, unsigned char *addr) { if (__builtin_constant_p(b)) - __asm__("bclr %1,%0" : : "WU"(addr), "i"(b)); + __asm__("bclr %1,%0" : "+WU"(*addr): "i"(b)); else - __asm__("bclr %w1,%0" : : "WU"(addr), "r"(b)); + __asm__("bclr %w1,%0" : "+WU"(*addr): "r"(b)); } -static inline void ctrl_bset(int b, unsigned long addr) +static inline void ctrl_bset(int b, unsigned char *addr) { if (__builtin_constant_p(b)) - __asm__("bset %1,%0" : : "WU"(addr), "i"(b)); + __asm__("bset %1,%0" : "+WU"(*addr): "i"(b)); else - __asm__("bset %w1,%0" : : "WU"(addr), "r"(b)); + __asm__("bset %w1,%0" : "+WU"(*addr): "r"(b)); } #endif /* __KERNEL__ */ diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h index 544c30785ad4..b408fe660cf8 100644 --- a/arch/h8300/include/asm/thread_info.h +++ b/arch/h8300/include/asm/thread_info.h @@ -13,6 +13,12 @@ #ifdef __KERNEL__ +/* + * Size of kernel stack for each process. This must be a power of 2... + */ +#define THREAD_SIZE_ORDER 1 +#define THREAD_SIZE 8192 /* 2 pages */ + #ifndef __ASSEMBLY__ /* @@ -46,14 +52,6 @@ struct thread_info { #define init_thread_info (init_thread_union.thread_info) #define init_stack (init_thread_union.stack) - -/* - * Size of kernel stack for each process. This must be a power of 2... - */ -#define THREAD_SIZE_ORDER 1 -#define THREAD_SIZE 8192 /* 2 pages */ - - /* how to get the thread information struct from C */ static inline struct thread_info *current_thread_info(void) { diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c index 0fd1fe65c0b8..c772abe6d19c 100644 --- a/arch/h8300/kernel/setup.c +++ b/arch/h8300/kernel/setup.c @@ -29,6 +29,7 @@ #include <linux/clk-provider.h> #include <linux/memblock.h> #include <linux/screen_info.h> +#include <linux/clocksource.h> #include <asm/setup.h> #include <asm/irq.h> @@ -252,4 +253,5 @@ void __init calibrate_delay(void) void __init time_init(void) { of_clk_init(NULL); + clocksource_probe(); } diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S index 7c302dcf5249..cb5dfb02c88d 100644 --- a/arch/h8300/kernel/vmlinux.lds.S +++ b/arch/h8300/kernel/vmlinux.lds.S @@ -1,5 +1,6 @@ #include <asm-generic/vmlinux.lds.h> #include <asm/page.h> +#include <asm/thread_info.h> #define ROMTOP 0x000000 #define RAMTOP 0x400000 @@ -42,11 +43,10 @@ SECTIONS . = RAMTOP; _ramstart = .; #define ADDR(x) ROMEND -#else #endif _sdata = . ; __data_start = . ; - RW_DATA_SECTION(0,0,0) + RW_DATA_SECTION(0, PAGE_SIZE, THREAD_SIZE) #if defined(CONFIG_ROMKERNEL) #undef ADDR #endif diff --git a/arch/m68k/emu/nfblock.c b/arch/m68k/emu/nfblock.c index f2a00c591bf7..e9110b9b8bcd 100644 --- a/arch/m68k/emu/nfblock.c +++ b/arch/m68k/emu/nfblock.c @@ -59,7 +59,7 @@ struct nfhd_device { struct gendisk *disk; }; -static void nfhd_make_request(struct request_queue *queue, struct bio *bio) +static blk_qc_t nfhd_make_request(struct request_queue *queue, struct bio *bio) { struct nfhd_device *dev = queue->queuedata; struct bio_vec bvec; @@ -77,6 +77,7 @@ static void nfhd_make_request(struct request_queue *queue, struct bio *bio) sec += len; } bio_endio(bio); + return BLK_QC_T_NONE; } static int nfhd_getgeo(struct block_device *bdev, struct hd_geometry *geo) diff --git a/arch/metag/include/asm/highmem.h b/arch/metag/include/asm/highmem.h index 6646a15c73dd..9b1d172cd884 100644 --- a/arch/metag/include/asm/highmem.h +++ b/arch/metag/include/asm/highmem.h @@ -56,7 +56,6 @@ extern void kunmap(struct page *page); extern void *kmap_atomic(struct page *page); extern void __kunmap_atomic(void *kvaddr); extern void *kmap_atomic_pfn(unsigned long pfn); -extern struct page *kmap_atomic_to_page(void *ptr); #endif #endif diff --git a/arch/metag/include/asm/irq.h b/arch/metag/include/asm/irq.h index ad6bd0edbc3b..6ac6d4a051dd 100644 --- a/arch/metag/include/asm/irq.h +++ b/arch/metag/include/asm/irq.h @@ -6,8 +6,12 @@ extern void irq_ctx_init(int cpu); extern void irq_ctx_exit(int cpu); # define __ARCH_HAS_DO_SOFTIRQ #else -# define irq_ctx_init(cpu) do { } while (0) -# define irq_ctx_exit(cpu) do { } while (0) +static inline void irq_ctx_init(int cpu) +{ +} +static inline void irq_ctx_exit(int cpu) +{ +} #endif void tbi_startup_interrupt(int); diff --git a/arch/metag/kernel/smp.c b/arch/metag/kernel/smp.c index ac3a199e33e7..c3c6f0864881 100644 --- a/arch/metag/kernel/smp.c +++ b/arch/metag/kernel/smp.c @@ -312,6 +312,7 @@ void cpu_die(void) { local_irq_disable(); idle_task_exit(); + irq_ctx_exit(smp_processor_id()); (void)cpu_report_death(); @@ -366,6 +367,7 @@ asmlinkage void secondary_start_kernel(void) panic("No TBI found!"); per_cpu_trap_init(cpu); + irq_ctx_init(cpu); preempt_disable(); diff --git a/arch/metag/mm/highmem.c b/arch/metag/mm/highmem.c index 807f1b1c4e65..f19a87f2c1ec 100644 --- a/arch/metag/mm/highmem.c +++ b/arch/metag/mm/highmem.c @@ -111,20 +111,6 @@ void *kmap_atomic_pfn(unsigned long pfn) return (void *)vaddr; } -struct page *kmap_atomic_to_page(void *ptr) -{ - unsigned long vaddr = (unsigned long)ptr; - int idx; - pte_t *pte; - - if (vaddr < FIXADDR_START) - return virt_to_page(ptr); - - idx = virt_to_fix(vaddr); - pte = kmap_pte - (idx - FIX_KMAP_BEGIN); - return pte_page(*pte); -} - void __init kmap_init(void) { unsigned long kmap_vstart; diff --git a/arch/microblaze/include/asm/highmem.h b/arch/microblaze/include/asm/highmem.h index d04638932438..67925ef18cfa 100644 --- a/arch/microblaze/include/asm/highmem.h +++ b/arch/microblaze/include/asm/highmem.h @@ -76,19 +76,6 @@ static inline void *kmap_atomic(struct page *page) return kmap_atomic_prot(page, kmap_prot); } -static inline struct page *kmap_atomic_to_page(void *ptr) -{ - unsigned long idx, vaddr = (unsigned long) ptr; - pte_t *pte; - - if (vaddr < FIXADDR_START) - return virt_to_page(ptr); - - idx = virt_to_fix(vaddr); - pte = kmap_pte - (idx - FIX_KMAP_BEGIN); - return pte_page(*pte); -} - #define flush_cache_kmaps() { flush_icache(); flush_dcache(); } #endif /* __KERNEL__ */ diff --git a/arch/mips/Kbuild b/arch/mips/Kbuild index dd295335891a..5c3f688a5232 100644 --- a/arch/mips/Kbuild +++ b/arch/mips/Kbuild @@ -17,6 +17,7 @@ obj- := $(platform-) obj-y += kernel/ obj-y += mm/ obj-y += net/ +obj-y += vdso/ ifdef CONFIG_KVM obj-y += kvm/ diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms index a424e46b50af..a96c81d1d22e 100644 --- a/arch/mips/Kbuild.platforms +++ b/arch/mips/Kbuild.platforms @@ -33,6 +33,7 @@ platforms += sibyte platforms += sni platforms += txx9 platforms += vr41xx +platforms += xilfpga # include the platform specific files include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platforms)) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e3aa5b0b4ef1..71683a853372 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -5,6 +5,7 @@ config MIPS select ARCH_MIGHT_HAVE_PC_PARPORT select ARCH_MIGHT_HAVE_PC_SERIO select ARCH_USE_CMPXCHG_LOCKREF if 64BIT + select ARCH_USE_BUILTIN_BSWAP select HAVE_CONTEXT_TRACKING select HAVE_GENERIC_DMA_COHERENT select HAVE_IDE @@ -60,6 +61,8 @@ config MIPS select SYSCTL_EXCEPTION_TRACE select HAVE_VIRT_CPU_ACCOUNTING_GEN select HAVE_IRQ_TIME_ACCOUNTING + select GENERIC_TIME_VSYSCALL + select ARCH_CLOCKSOURCE_DATA menu "Machine selection" @@ -401,6 +404,28 @@ config MACH_PISTACHIO help This enables support for the IMG Pistachio SoC platform. +config MACH_XILFPGA + bool "MIPSfpga Xilinx based boards" + select ARCH_REQUIRE_GPIOLIB + select BOOT_ELF32 + select BOOT_RAW + select BUILTIN_DTB + select CEVT_R4K + select COMMON_CLK + select CSRC_R4K + select IRQ_MIPS_CPU + select LIBFDT + select MIPS_CPU_SCACHE + select SYS_HAS_EARLY_PRINTK + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_ZBOOT_UART16550 + select USE_OF + select USE_GENERIC_EARLY_PRINTK_8250 + help + This enables support for the IMG University Program MIPSfpga platform. + config MIPS_MALTA bool "MIPS Malta board" select ARCH_MAY_HAVE_PC_FDC @@ -424,6 +449,7 @@ config MIPS_MALTA select MIPS_L1_CACHE_SHIFT_6 select PCI_GT64XXX_PCI0 select MIPS_MSC + select SMP_UP if SMP select SWAP_IO_SPACE select SYS_HAS_CPU_MIPS32_R1 select SYS_HAS_CPU_MIPS32_R2 @@ -449,6 +475,8 @@ config MIPS_MALTA select SYS_SUPPORTS_ZBOOT select USE_OF select ZONE_DMA32 if 64BIT + select BUILTIN_DTB + select LIBFDT help This enables support for the MIPS Technologies Malta evaluation board. @@ -964,6 +992,7 @@ source "arch/mips/loongson32/Kconfig" source "arch/mips/loongson64/Kconfig" source "arch/mips/netlogic/Kconfig" source "arch/mips/paravirt/Kconfig" +source "arch/mips/xilfpga/Kconfig" endmenu @@ -1036,6 +1065,9 @@ config CSRC_R4K config CSRC_SB1250 bool +config MIPS_CLOCK_VSYSCALL + def_bool CSRC_R4K || CLKSRC_MIPS_GIC + config GPIO_TXX9 select ARCH_REQUIRE_GPIOLIB bool @@ -2529,6 +2561,9 @@ choice help Allows the configuration of the timer frequency. + config HZ_24 + bool "24 HZ" if SYS_SUPPORTS_24HZ || SYS_SUPPORTS_ARBIT_HZ + config HZ_48 bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ @@ -2552,6 +2587,9 @@ choice endchoice +config SYS_SUPPORTS_24HZ + bool + config SYS_SUPPORTS_48HZ bool @@ -2575,13 +2613,18 @@ config SYS_SUPPORTS_1024HZ config SYS_SUPPORTS_ARBIT_HZ bool - default y if !SYS_SUPPORTS_48HZ && !SYS_SUPPORTS_100HZ && \ - !SYS_SUPPORTS_128HZ && !SYS_SUPPORTS_250HZ && \ - !SYS_SUPPORTS_256HZ && !SYS_SUPPORTS_1000HZ && \ + default y if !SYS_SUPPORTS_24HZ && \ + !SYS_SUPPORTS_48HZ && \ + !SYS_SUPPORTS_100HZ && \ + !SYS_SUPPORTS_128HZ && \ + !SYS_SUPPORTS_250HZ && \ + !SYS_SUPPORTS_256HZ && \ + !SYS_SUPPORTS_1000HZ && \ !SYS_SUPPORTS_1024HZ config HZ int + default 24 if HZ_24 default 48 if HZ_48 default 100 if HZ_100 default 128 if HZ_128 @@ -2685,7 +2728,7 @@ config BUILTIN_DTB bool choice - prompt "Kernel appended dtb support" if OF + prompt "Kernel appended dtb support" if USE_OF default MIPS_NO_APPENDED_DTB config MIPS_NO_APPENDED_DTB @@ -2693,6 +2736,20 @@ choice help Do not enable appended dtb support. + config MIPS_ELF_APPENDED_DTB + bool "vmlinux" + help + With this option, the boot code will look for a device tree binary + DTB) included in the vmlinux ELF section .appended_dtb. By default + it is empty and the DTB can be appended using binutils command + objcopy: + + objcopy --update-section .appended_dtb=<filename>.dtb vmlinux + + This is meant as a backward compatiblity convenience for those + systems with a bootloader that can't be upgraded to accommodate + the documented boot protocol using a device tree. + config MIPS_RAW_APPENDED_DTB bool "vmlinux.bin" help @@ -2729,6 +2786,25 @@ choice if you don't intend to always append a DTB. endchoice +choice + prompt "Kernel command line type" if !CMDLINE_OVERRIDE + default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \ + !MIPS_MALTA && !MIPS_SEAD3 && \ + !CAVIUM_OCTEON_SOC + default MIPS_CMDLINE_FROM_BOOTLOADER + + config MIPS_CMDLINE_FROM_DTB + depends on USE_OF + bool "Dtb kernel arguments if available" + + config MIPS_CMDLINE_DTB_EXTEND + depends on USE_OF + bool "Extend dtb kernel arguments with bootloader arguments" + + config MIPS_CMDLINE_FROM_BOOTLOADER + bool "Bootloader kernel arguments if available" +endchoice + endmenu config LOCKDEP_SUPPORT @@ -2739,6 +2815,10 @@ config STACKTRACE_SUPPORT bool default y +config HAVE_LATENCYTOP_SUPPORT + bool + default y + config PGTABLE_LEVELS int default 3 if 64BIT && !PAGE_SIZE_64KB diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index e250524021ac..f0e314ceb8ba 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -113,4 +113,76 @@ config SPINLOCK_TEST help Add several files to the debugfs to test spinlock speed. +if CPU_MIPSR6 + +choice + prompt "Compact branch policy" + default MIPS_COMPACT_BRANCHES_OPTIMAL + +config MIPS_COMPACT_BRANCHES_NEVER + bool "Never (force delay slot branches)" + help + Pass the -mcompact-branches=never flag to the compiler in order to + force it to always emit branches with delay slots, and make no use + of the compact branch instructions introduced by MIPSr6. This is + useful if you suspect there may be an issue with compact branches in + either the compiler or the CPU. + +config MIPS_COMPACT_BRANCHES_OPTIMAL + bool "Optimal (use where beneficial)" + help + Pass the -mcompact-branches=optimal flag to the compiler in order for + it to make use of compact branch instructions where it deems them + beneficial, and use branches with delay slots elsewhere. This is the + default compiler behaviour, and should be used unless you have a + reason to choose otherwise. + +config MIPS_COMPACT_BRANCHES_ALWAYS + bool "Always (force compact branches)" + help + Pass the -mcompact-branches=always flag to the compiler in order to + force it to always emit compact branches, making no use of branch + instructions with delay slots. This can result in more compact code + which may be beneficial in some scenarios. + +endchoice + +endif # CPU_MIPSR6 + +config SCACHE_DEBUGFS + bool "L2 cache debugfs entries" + depends on DEBUG_FS + help + Enable this to allow parts of the L2 cache configuration, such as + whether or not prefetching is enabled, to be exposed to userland + via debugfs. + + If unsure, say N. + +menuconfig MIPS_CPS_NS16550 + bool "CPS SMP NS16550 UART output" + depends on MIPS_CPS + help + Output debug information via an ns16550 compatible UART if exceptions + occur early in the boot process of a secondary core. + +if MIPS_CPS_NS16550 + +config MIPS_CPS_NS16550_BASE + hex "UART Base Address" + default 0x1b0003f8 if MIPS_MALTA + help + The base address of the ns16550 compatible UART on which to output + debug information from the early stages of core startup. + +config MIPS_CPS_NS16550_SHIFT + int "UART Register Shift" + default 0 if MIPS_MALTA + help + The number of bits to shift ns16550 register indices by in order to + form their addresses. That is, log base 2 of the span between + adjacent ns16550 registers in the system. + +endif # MIPS_CPS_NS16550 + endmenu diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 252e347958f3..3f70ba54ae21 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -204,6 +204,10 @@ toolchain-msa := $(call cc-option-yn,$(mips-cflags) -mhard-float -mfp64 -Wa$( cflags-$(toolchain-msa) += -DTOOLCHAIN_SUPPORTS_MSA endif +cflags-$(CONFIG_MIPS_COMPACT_BRANCHES_NEVER) += -mcompact-branches=never +cflags-$(CONFIG_MIPS_COMPACT_BRANCHES_OPTIMAL) += -mcompact-branches=optimal +cflags-$(CONFIG_MIPS_COMPACT_BRANCHES_ALWAYS) += -mcompact-branches=always + # # Firmware support # diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c index 17503a05938e..6d38948f0f1e 100644 --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c @@ -105,11 +105,28 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv) { char buf[20]; + int len, err; /* Fill boardinfo structure */ memset(&iv->boardinfo, 0 , sizeof(struct ssb_boardinfo)); - bcm47xx_fill_ssb_boardinfo(&iv->boardinfo, NULL); + len = bcm47xx_nvram_getenv("boardvendor", buf, sizeof(buf)); + if (len > 0) { + err = kstrtou16(strim(buf), 0, &iv->boardinfo.vendor); + if (err) + pr_warn("Couldn't parse nvram board vendor entry with value \"%s\"\n", + buf); + } + if (!iv->boardinfo.vendor) + iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM; + + len = bcm47xx_nvram_getenv("boardtype", buf, sizeof(buf)); + if (len > 0) { + err = kstrtou16(strim(buf), 0, &iv->boardinfo.type); + if (err) + pr_warn("Couldn't parse nvram board type entry with value \"%s\"\n", + buf); + } memset(&iv->sprom, 0, sizeof(struct ssb_sprom)); bcm47xx_fill_sprom(&iv->sprom, NULL, false); diff --git a/arch/mips/bcm47xx/sprom.c b/arch/mips/bcm47xx/sprom.c index 2d5c7a7f24bb..a7e569c7968e 100644 --- a/arch/mips/bcm47xx/sprom.c +++ b/arch/mips/bcm47xx/sprom.c @@ -60,9 +60,9 @@ static int get_nvram_var(const char *prefix, const char *postfix, } #define NVRAM_READ_VAL(type) \ -static void nvram_read_ ## type (const char *prefix, \ - const char *postfix, const char *name, \ - type *val, type allset, bool fallback) \ +static void nvram_read_ ## type(const char *prefix, \ + const char *postfix, const char *name, \ + type *val, type allset, bool fallback) \ { \ char buf[100]; \ int err; \ @@ -422,7 +422,10 @@ static void bcm47xx_fill_sprom_path_r4589(struct ssb_sprom *sprom, int i; for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) { - struct ssb_sprom_core_pwr_info *pwr_info = &sprom->core_pwr_info[i]; + struct ssb_sprom_core_pwr_info *pwr_info; + + pwr_info = &sprom->core_pwr_info[i]; + snprintf(postfix, sizeof(postfix), "%i", i); nvram_read_u8(prefix, postfix, "maxp2ga", &pwr_info->maxpwr_2g, 0, fallback); @@ -470,7 +473,10 @@ static void bcm47xx_fill_sprom_path_r45(struct ssb_sprom *sprom, int i; for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) { - struct ssb_sprom_core_pwr_info *pwr_info = &sprom->core_pwr_info[i]; + struct ssb_sprom_core_pwr_info *pwr_info; + + pwr_info = &sprom->core_pwr_info[i]; + snprintf(postfix, sizeof(postfix), "%i", i); nvram_read_u16(prefix, postfix, "pa2gw3a", &pwr_info->pa_2g[3], 0, fallback); @@ -535,10 +541,11 @@ static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom, nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback); /* The address prefix 00:90:4C is used by Broadcom in their initial - configuration. When a mac address with the prefix 00:90:4C is used - all devices from the same series are sharing the same mac address. - To prevent mac address collisions we replace them with a mac address - based on the base address. */ + * configuration. When a mac address with the prefix 00:90:4C is used + * all devices from the same series are sharing the same mac address. + * To prevent mac address collisions we replace them with a mac address + * based on the base address. + */ if (!bcm47xx_is_valid_mac(sprom->il0mac)) { u8 mac[6]; @@ -592,32 +599,23 @@ void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix, bcm47xx_sprom_fill_auto(sprom, prefix, fallback); } -#ifdef CONFIG_BCM47XX_SSB -void bcm47xx_fill_ssb_boardinfo(struct ssb_boardinfo *boardinfo, - const char *prefix) -{ - nvram_read_u16(prefix, NULL, "boardvendor", &boardinfo->vendor, 0, - true); - if (!boardinfo->vendor) - boardinfo->vendor = SSB_BOARDVENDOR_BCM; - - nvram_read_u16(prefix, NULL, "boardtype", &boardinfo->type, 0, true); -} -#endif - #if defined(CONFIG_BCM47XX_SSB) static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out) { char prefix[10]; - if (bus->bustype == SSB_BUSTYPE_PCI) { + switch (bus->bustype) { + case SSB_BUSTYPE_SSB: + bcm47xx_fill_sprom(out, NULL, false); + return 0; + case SSB_BUSTYPE_PCI: memset(out, 0, sizeof(struct ssb_sprom)); snprintf(prefix, sizeof(prefix), "pci/%u/%u/", bus->host_pci->bus->number + 1, PCI_SLOT(bus->host_pci->devfn)); bcm47xx_fill_sprom(out, prefix, false); return 0; - } else { + default: pr_warn("Unable to fill SPROM for given bustype.\n"); return -EINVAL; } diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index 33727e7f0c79..b2097c0d2ed7 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -7,6 +7,8 @@ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/init.h> #include <linux/kernel.h> #include <linux/string.h> @@ -31,7 +33,6 @@ #include <uapi/linux/bcm933xx_hcs.h> -#define PFX "board_bcm963xx: " #define HCS_OFFSET_128K 0x20000 @@ -740,7 +741,7 @@ int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out) memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom)); return 0; } else { - printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n"); + pr_err("unable to fill SPROM for given bustype\n"); return -EINVAL; } } @@ -784,7 +785,7 @@ void __init board_prom_init(void) cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]); else strcpy(cfe_version, "unknown"); - printk(KERN_INFO PFX "CFE version: %s\n", cfe_version); + pr_info("CFE version: %s\n", cfe_version); bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET); @@ -808,8 +809,7 @@ void __init board_prom_init(void) char name[17]; memcpy(name, board_name, 16); name[16] = 0; - printk(KERN_ERR PFX "unknown bcm963xx board: %s\n", - name); + pr_err("unknown bcm963xx board: %s\n", name); return; } @@ -854,7 +854,7 @@ void __init board_setup(void) { if (!board.name[0]) panic("unable to detect bcm963xx board"); - printk(KERN_INFO PFX "board name: %s\n", board.name); + pr_info("board name: %s\n", board.name); /* make sure we're running on expected cpu */ if (bcm63xx_get_cpu_id() != board.expected_cpu_id) @@ -910,7 +910,7 @@ int __init board_register_devices(void) memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN); if (ssb_arch_register_fallback_sprom( &bcm63xx_get_fallback_sprom) < 0) - pr_err(PFX "failed to register fallback SPROM\n"); + pr_err("failed to register fallback SPROM\n"); } #endif diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c index 307ec8b8e41c..1c7c3fbfa1f3 100644 --- a/arch/mips/bcm63xx/cpu.c +++ b/arch/mips/bcm63xx/cpu.c @@ -376,10 +376,10 @@ void __init bcm63xx_cpu_init(void) bcm63xx_cpu_freq = detect_cpu_clock(); bcm63xx_memory_size = detect_memory_size(); - printk(KERN_INFO "Detected Broadcom 0x%04x CPU revision %02x\n", - bcm63xx_cpu_id, bcm63xx_cpu_rev); - printk(KERN_INFO "CPU frequency is %u MHz\n", - bcm63xx_cpu_freq / 1000000); - printk(KERN_INFO "%uMB of RAM installed\n", - bcm63xx_memory_size >> 20); + pr_info("Detected Broadcom 0x%04x CPU revision %02x\n", + bcm63xx_cpu_id, bcm63xx_cpu_rev); + pr_info("CPU frequency is %u MHz\n", + bcm63xx_cpu_freq / 1000000); + pr_info("%uMB of RAM installed\n", + bcm63xx_memory_size >> 20); } diff --git a/arch/mips/bcm63xx/dev-pcmcia.c b/arch/mips/bcm63xx/dev-pcmcia.c index a551bab5ecb9..9496cd236951 100644 --- a/arch/mips/bcm63xx/dev-pcmcia.c +++ b/arch/mips/bcm63xx/dev-pcmcia.c @@ -139,6 +139,6 @@ int __init bcm63xx_pcmcia_register(void) return platform_device_register(&bcm63xx_pcmcia_device); out_err: - printk(KERN_ERR "unable to set pcmcia chip select\n"); + pr_err("unable to set pcmcia chip select\n"); return ret; } diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c index 1a47ec2a0906..c96139097ae2 100644 --- a/arch/mips/bcm63xx/irq.c +++ b/arch/mips/bcm63xx/irq.c @@ -311,7 +311,7 @@ static int bcm63xx_external_irq_set_type(struct irq_data *d, break; default: - printk(KERN_ERR "bogus flow type combination given !\n"); + pr_err("bogus flow type combination given !\n"); return -EINVAL; } diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c index 240fb4ffa55c..2be9caaa2085 100644 --- a/arch/mips/bcm63xx/setup.c +++ b/arch/mips/bcm63xx/setup.c @@ -24,7 +24,7 @@ void bcm63xx_machine_halt(void) { - printk(KERN_INFO "System halted\n"); + pr_info("System halted\n"); while (1) ; } @@ -34,7 +34,7 @@ static void bcm6348_a1_reboot(void) u32 reg; /* soft reset all blocks */ - printk(KERN_INFO "soft-resetting all blocks ...\n"); + pr_info("soft-resetting all blocks ...\n"); reg = bcm_perf_readl(PERF_SOFTRESET_REG); reg &= ~SOFTRESET_6348_ALL; bcm_perf_writel(reg, PERF_SOFTRESET_REG); @@ -46,7 +46,7 @@ static void bcm6348_a1_reboot(void) mdelay(10); /* Jump to the power on address. */ - printk(KERN_INFO "jumping to reset vector.\n"); + pr_info("jumping to reset vector.\n"); /* set high vectors (base at 0xbfc00000 */ set_c0_status(ST0_BEV | ST0_ERL); /* run uncached in kseg0 */ @@ -110,7 +110,7 @@ void bcm63xx_machine_reboot(void) if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1)) bcm6348_a1_reboot(); - printk(KERN_INFO "triggering watchdog soft-reset...\n"); + pr_info("triggering watchdog soft-reset...\n"); if (BCMCPU_IS_6328()) { bcm_wdt_writel(1, WDT_SOFTRESET_REG); } else { diff --git a/arch/mips/bcm63xx/timer.c b/arch/mips/bcm63xx/timer.c index 5f1135981568..2110359c00e5 100644 --- a/arch/mips/bcm63xx/timer.c +++ b/arch/mips/bcm63xx/timer.c @@ -195,7 +195,7 @@ int bcm63xx_timer_init(void) irq = bcm63xx_get_irq_number(IRQ_TIMER); ret = request_irq(irq, timer_interrupt, 0, "bcm63xx_timer", NULL); if (ret) { - printk(KERN_ERR "bcm63xx_timer: failed to register irq\n"); + pr_err("%s: failed to register irq\n", __func__); return ret; } diff --git a/arch/mips/bmips/setup.c b/arch/mips/bmips/setup.c index 526ec2789bb9..5b16d2955fbb 100644 --- a/arch/mips/bmips/setup.c +++ b/arch/mips/bmips/setup.c @@ -157,7 +157,6 @@ void __init plat_mem_setup(void) panic("no dtb found"); __dt_setup_arch(dtb); - strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); for (q = bmips_quirk_list; q->quirk_fn; q++) { if (of_flat_dt_is_compatible(of_get_flat_dt_root(), diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile index bac7b8dab9a4..a0bf516ec394 100644 --- a/arch/mips/boot/dts/Makefile +++ b/arch/mips/boot/dts/Makefile @@ -6,6 +6,7 @@ dts-dirs += mti dts-dirs += netlogic dts-dirs += qca dts-dirs += ralink +dts-dirs += xilfpga obj-y := $(addsuffix /, $(dts-dirs)) diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi index d817bb46b934..d4bf52cfcf17 100644 --- a/arch/mips/boot/dts/brcm/bcm7346.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi @@ -87,14 +87,32 @@ compatible = "brcm,bcm7120-l2-intc"; reg = <0x406780 0x8>; - brcm,int-map-mask = <0x44>; + brcm,int-map-mask = <0x44>, <0xf000000>; brcm,int-fwd-mask = <0x70000>; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&periph_intc>; - interrupts = <59>; + interrupts = <59>, <57>; + interrupt-names = "upg_main", "upg_bsc"; + }; + + upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x408b80 0x8>; + + brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>; + brcm,int-fwd-mask = <0>; + brcm,irq-can-wake; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <60>, <58>, <62>; + interrupt-names = "upg_main_aon", "upg_bsc_aon", + "upg_spi"; }; sun_top_ctrl: syscon@404000 { @@ -144,6 +162,56 @@ status = "disabled"; }; + bsca: i2c@406200 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406200 0x58>; + interrupts = <24>; + interrupt-names = "upg_bsca"; + status = "disabled"; + }; + + bscb: i2c@406280 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406280 0x58>; + interrupts = <25>; + interrupt-names = "upg_bscb"; + status = "disabled"; + }; + + bscc: i2c@406300 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406300 0x58>; + interrupts = <26>; + interrupt-names = "upg_bscc"; + status = "disabled"; + }; + + bscd: i2c@406380 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406380 0x58>; + interrupts = <27>; + interrupt-names = "upg_bscd"; + status = "disabled"; + }; + + bsce: i2c@408980 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_aon_irq0_intc>; + reg = <0x408980 0x58>; + interrupts = <27>; + interrupt-names = "upg_bsce"; + status = "disabled"; + }; + enet0: ethernet@430000 { phy-mode = "internal"; phy-handle = <&phy1>; @@ -246,5 +314,47 @@ interrupts = <76>; status = "disabled"; }; + + sata: sata@181000 { + compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0x181000 0xa9c>, <0x180020 0x1c>; + interrupt-parent = <&periph_intc>; + interrupts = <40>; + #address-cells = <1>; + #size-cells = <0>; + brcm,broken-ncq; + brcm,broken-phy; + status = "disabled"; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy0>; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy1>; + }; + }; + + sata_phy: sata-phy@1800000 { + compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3"; + reg = <0x180100 0x0eff>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + sata_phy1: sata-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; }; }; diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi index 277a90adc1a7..8e2501694d03 100644 --- a/arch/mips/boot/dts/brcm/bcm7358.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi @@ -81,14 +81,32 @@ compatible = "brcm,bcm7120-l2-intc"; reg = <0x406600 0x8>; - brcm,int-map-mask = <0x44>; + brcm,int-map-mask = <0x44>, <0x7000000>; brcm,int-fwd-mask = <0x70000>; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&periph_intc>; - interrupts = <56>; + interrupts = <56>, <54>; + interrupt-names = "upg_main", "upg_bsc"; + }; + + upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x408b80 0x8>; + + brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>; + brcm,int-fwd-mask = <0>; + brcm,irq-can-wake; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <57>, <55>, <59>; + interrupt-names = "upg_main_aon", "upg_bsc_aon", + "upg_spi"; }; sun_top_ctrl: syscon@404000 { @@ -138,6 +156,46 @@ status = "disabled"; }; + bsca: i2c@406200 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406200 0x58>; + interrupts = <24>; + interrupt-names = "upg_bsca"; + status = "disabled"; + }; + + bscb: i2c@406280 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406280 0x58>; + interrupts = <25>; + interrupt-names = "upg_bscb"; + status = "disabled"; + }; + + bscc: i2c@406300 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406300 0x58>; + interrupts = <26>; + interrupt-names = "upg_bscc"; + status = "disabled"; + }; + + bscd: i2c@408980 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_aon_irq0_intc>; + reg = <0x408980 0x58>; + interrupts = <27>; + interrupt-names = "upg_bscd"; + status = "disabled"; + }; + enet0: ethernet@430000 { phy-mode = "internal"; phy-handle = <&phy1>; diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi index 9e1e571ba346..7e5f76040fb8 100644 --- a/arch/mips/boot/dts/brcm/bcm7360.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi @@ -81,14 +81,32 @@ compatible = "brcm,bcm7120-l2-intc"; reg = <0x406600 0x8>; - brcm,int-map-mask = <0x44>; + brcm,int-map-mask = <0x44>, <0x7000000>; brcm,int-fwd-mask = <0x70000>; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&periph_intc>; - interrupts = <56>; + interrupts = <56>, <54>; + interrupt-names = "upg_main", "upg_bsc"; + }; + + upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x408b80 0x8>; + + brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>; + brcm,int-fwd-mask = <0>; + brcm,irq-can-wake; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <57>, <55>, <59>; + interrupt-names = "upg_main_aon", "upg_bsc_aon", + "upg_spi"; }; sun_top_ctrl: syscon@404000 { @@ -138,6 +156,46 @@ status = "disabled"; }; + bsca: i2c@406200 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406200 0x58>; + interrupts = <24>; + interrupt-names = "upg_bsca"; + status = "disabled"; + }; + + bscb: i2c@406280 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406280 0x58>; + interrupts = <25>; + interrupt-names = "upg_bscb"; + status = "disabled"; + }; + + bscc: i2c@406300 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406300 0x58>; + interrupts = <26>; + interrupt-names = "upg_bscc"; + status = "disabled"; + }; + + bscd: i2c@408980 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_aon_irq0_intc>; + reg = <0x408980 0x58>; + interrupts = <27>; + interrupt-names = "upg_bscd"; + status = "disabled"; + }; + enet0: ethernet@430000 { phy-mode = "internal"; phy-handle = <&phy1>; diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi index 6e65db86fc61..c739ea77acb0 100644 --- a/arch/mips/boot/dts/brcm/bcm7362.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi @@ -87,14 +87,32 @@ compatible = "brcm,bcm7120-l2-intc"; reg = <0x406600 0x8>; - brcm,int-map-mask = <0x44>; + brcm,int-map-mask = <0x44>, <0x7000000>; brcm,int-fwd-mask = <0x70000>; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&periph_intc>; - interrupts = <56>; + interrupts = <56>, <54>; + interrupt-names = "upg_main", "upg_bsc"; + }; + + upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x408b80 0x8>; + + brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>; + brcm,int-fwd-mask = <0>; + brcm,irq-can-wake; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <57>, <55>, <59>; + interrupt-names = "upg_main_aon", "upg_bsc_aon", + "upg_spi"; }; sun_top_ctrl: syscon@404000 { @@ -144,6 +162,36 @@ status = "disabled"; }; + bsca: i2c@406200 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406200 0x58>; + interrupts = <24>; + interrupt-names = "upg_bsca"; + status = "disabled"; + }; + + bscb: i2c@406280 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_irq0_intc>; + reg = <0x406280 0x58>; + interrupts = <25>; + interrupt-names = "upg_bscb"; + status = "disabled"; + }; + + bscd: i2c@408980 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&upg_aon_irq0_intc>; + reg = <0x408980 0x58>; + interrupts = <27>; + interrupt-names = "upg_bscd"; + status = "disabled"; + }; + enet0: ethernet@430000 { phy-mode = "internal"; phy-handle = <&phy1>; @@ -189,5 +237,47 @@ interrupts = <66>; status = "disabled"; }; + + sata: sata@181000 { + compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0x181000 0xa9c>, <0x180020 0x1c>; + interrupt-parent = <&periph_intc>; + interrupts = <86>; + #address-cells = <1>; + #size-cells = <0>; + brcm,broken-ncq; + brcm,broken-phy; + status = "disabled"; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy0>; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy1>; + }; + }; + + sata_phy: sata-phy@1800000 { + compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3"; + reg = <0x180100 0x0eff>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + sata_phy1: sata-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; }; }; diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi index 5b660b617ead..e24d41ab4e30 100644 --- a/arch/mips/boot/dts/brcm/bcm7425.dtsi +++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi @@ -221,5 +221,47 @@ interrupts = <73>; status = "disabled"; }; + + sata: sata@181000 { + compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0x181000 0xa9c>, <0x180020 0x1c>; + interrupt-parent = <&periph_intc>; + interrupts = <40>; + #address-cells = <1>; + #size-cells = <0>; + brcm,broken-ncq; + brcm,broken-phy; + status = "disabled"; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy0>; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy1>; + }; + }; + + sata_phy: sata-phy@1800000 { + compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3"; + reg = <0x180100 0x0eff>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + sata_phy1: sata-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; }; }; diff --git a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts index 3fe0445b9d37..d3d28816a027 100644 --- a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts +++ b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts @@ -29,6 +29,26 @@ status = "okay"; }; +&bsca { + status = "okay"; +}; + +&bscb { + status = "okay"; +}; + +&bscc { + status = "okay"; +}; + +&bscd { + status = "okay"; +}; + +&bsce { + status = "okay"; +}; + &enet0 { status = "okay"; }; @@ -64,3 +84,11 @@ &ohci3 { status = "okay"; }; + +&sata { + status = "okay"; +}; + +&sata_phy { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm97358svmb.dts b/arch/mips/boot/dts/brcm/bcm97358svmb.dts index a8dc01e30313..02ce6b429dc4 100644 --- a/arch/mips/boot/dts/brcm/bcm97358svmb.dts +++ b/arch/mips/boot/dts/brcm/bcm97358svmb.dts @@ -29,6 +29,22 @@ status = "okay"; }; +&bsca { + status = "okay"; +}; + +&bscb { + status = "okay"; +}; + +&bscc { + status = "okay"; +}; + +&bscd { + status = "okay"; +}; + &enet0 { status = "okay"; }; diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts index eee8b0e32681..d48462e091f1 100644 --- a/arch/mips/boot/dts/brcm/bcm97360svmb.dts +++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts @@ -29,6 +29,22 @@ status = "okay"; }; +&bsca { + status = "okay"; +}; + +&bscb { + status = "okay"; +}; + +&bscc { + status = "okay"; +}; + +&bscd { + status = "okay"; +}; + &enet0 { status = "okay"; }; diff --git a/arch/mips/boot/dts/brcm/bcm97362svmb.dts b/arch/mips/boot/dts/brcm/bcm97362svmb.dts index 739c2ef5663b..3cfcaebe7f79 100644 --- a/arch/mips/boot/dts/brcm/bcm97362svmb.dts +++ b/arch/mips/boot/dts/brcm/bcm97362svmb.dts @@ -29,6 +29,18 @@ status = "okay"; }; +&bsca { + status = "okay"; +}; + +&bscb { + status = "okay"; +}; + +&bscd { + status = "okay"; +}; + &enet0 { status = "okay"; }; @@ -40,3 +52,11 @@ &ohci0 { status = "okay"; }; + +&sata { + status = "okay"; +}; + +&sata_phy { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/mti/malta.dts b/arch/mips/boot/dts/mti/malta.dts index c678115f5b7f..b18c46637d21 100644 --- a/arch/mips/boot/dts/mti/malta.dts +++ b/arch/mips/boot/dts/mti/malta.dts @@ -1,5 +1,9 @@ /dts-v1/; +/memreserve/ 0x00000000 0x00001000; /* YAMON exception vectors */ +/memreserve/ 0x00001000 0x000ef000; /* YAMON */ +/memreserve/ 0x000f0000 0x00010000; /* PIIX4 ISA memory */ + / { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/mips/boot/dts/xilfpga/Makefile b/arch/mips/boot/dts/xilfpga/Makefile new file mode 100644 index 000000000000..913a752a9ff1 --- /dev/null +++ b/arch/mips/boot/dts/xilfpga/Makefile @@ -0,0 +1,9 @@ +dtb-$(CONFIG_XILFPGA_NEXYS4DDR) += nexys4ddr.dtb + +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) + +# Force kbuild to make empty built-in.o if necessary +obj- += dummy.o + +always := $(dtb-y) +clean-files := *.dtb *.dtb.S diff --git a/arch/mips/boot/dts/xilfpga/microAptiv.dtsi b/arch/mips/boot/dts/xilfpga/microAptiv.dtsi new file mode 100644 index 000000000000..81d518e75785 --- /dev/null +++ b/arch/mips/boot/dts/xilfpga/microAptiv.dtsi @@ -0,0 +1,21 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "img,xilfpga"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "mips,m14Kc"; + clocks = <&ext>; + reg = <0>; + }; + }; + + ext: ext { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; +}; diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts new file mode 100644 index 000000000000..686ebd11386d --- /dev/null +++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts @@ -0,0 +1,46 @@ +/dts-v1/; + +#include "microAptiv.dtsi" + +/ { + compatible = "digilent,nexys4ddr"; + + memory { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; + + cpuintc: interrupt-controller@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + axi_gpio: gpio@10600000 { + #gpio-cells = <1>; + compatible = "xlnx,xps-gpio-1.00.a"; + gpio-controller; + reg = <0x10600000 0x10000>; + xlnx,all-inputs = <0x0>; + xlnx,dout-default = <0x0>; + xlnx,gpio-width = <0x16>; + xlnx,interrupt-present = <0x0>; + xlnx,is-dual = <0x0>; + xlnx,tri-default = <0xffffffff>; + } ; + + axi_uart16550: serial@10400000 { + compatible = "ns16550a"; + reg = <0x10400000 0x10000>; + + reg-shift = <2>; + reg-offset = <0x1000>; + + clocks = <&ext>; + }; +}; + +&ext { + clock-frequency = <50000000>; +}; diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index bd634259eab9..cd7101fb6227 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -1081,6 +1081,7 @@ void __init prom_free_prom_memory(void) int octeon_prune_device_tree(void); +extern const char __appended_dtb; extern const char __dtb_octeon_3xxx_begin; extern const char __dtb_octeon_68xx_begin; void __init device_tree_init(void) @@ -1088,11 +1089,19 @@ void __init device_tree_init(void) const void *fdt; bool do_prune; +#ifdef CONFIG_MIPS_ELF_APPENDED_DTB + if (!fdt_check_header(&__appended_dtb)) { + fdt = &__appended_dtb; + do_prune = false; + pr_info("Using appended Device Tree.\n"); + } else +#endif if (octeon_bootinfo->minor_version >= 3 && octeon_bootinfo->fdt_addr) { fdt = phys_to_virt(octeon_bootinfo->fdt_addr); if (fdt_check_header(fdt)) panic("Corrupt Device Tree passed to kernel."); do_prune = false; + pr_info("Using passed Device Tree.\n"); } else if (OCTEON_IS_MODEL(OCTEON_CN68XX)) { fdt = &__dtb_octeon_68xx_begin; do_prune = true; @@ -1106,8 +1115,6 @@ void __init device_tree_init(void) if (do_prune) { octeon_prune_device_tree(); pr_info("Using internal Device Tree.\n"); - } else { - pr_info("Using passed Device Tree.\n"); } unflatten_and_copy_device_tree(); } diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 1cdff6b6327d..b3e7a1b61220 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -122,20 +122,20 @@ CONFIG_EEPROM_MAX6875=y CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDETAPE=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_IT8213=m CONFIG_BLK_DEV_TC86C001=m CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -CONFIG_BLK_DEV_SR=m +CONFIG_CHR_DEV_ST=y +CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_CHR_DEV_SCH=m CONFIG_ATA=y CONFIG_SATA_SIL24=y +CONFIG_PATA_CMD64X=y +CONFIG_PATA_IT8213=m CONFIG_PATA_SIL680=y +CONFIG_ATA_GENERIC=y +CONFIG_PATA_LEGACY=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y diff --git a/arch/mips/configs/bmips_be_defconfig b/arch/mips/configs/bmips_be_defconfig index f5585c8f35ad..24dcb90b0f64 100644 --- a/arch/mips/configs/bmips_be_defconfig +++ b/arch/mips/configs/bmips_be_defconfig @@ -8,7 +8,7 @@ CONFIG_MIPS_O32_FP64_SUPPORT=y # CONFIG_SWAP is not set CONFIG_NO_HZ=y CONFIG_BLK_DEV_INITRD=y -# CONFIG_RD_GZIP is not set +CONFIG_RD_GZIP=y CONFIG_EXPERT=y # CONFIG_VM_EVENT_COUNTERS is not set # CONFIG_SLUB_DEBUG is not set @@ -33,6 +33,7 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_PRINTK_TIME=y CONFIG_BRCMSTB_GISB_ARB=y CONFIG_MTD=y CONFIG_MTD_CFI=y diff --git a/arch/mips/configs/bmips_stb_defconfig b/arch/mips/configs/bmips_stb_defconfig index 400a47ec1ef1..4eb5d6e9cf8f 100644 --- a/arch/mips/configs/bmips_stb_defconfig +++ b/arch/mips/configs/bmips_stb_defconfig @@ -9,7 +9,7 @@ CONFIG_MIPS_O32_FP64_SUPPORT=y # CONFIG_SWAP is not set CONFIG_NO_HZ=y CONFIG_BLK_DEV_INITRD=y -# CONFIG_RD_GZIP is not set +CONFIG_RD_GZIP=y CONFIG_EXPERT=y # CONFIG_VM_EVENT_COUNTERS is not set # CONFIG_SLUB_DEBUG is not set @@ -34,6 +34,7 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_PRINTK_TIME=y CONFIG_BRCMSTB_GISB_ARB=y CONFIG_MTD=y CONFIG_MTD_CFI=y diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index 5135dc0b950a..2924ba34a01b 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -31,9 +31,9 @@ CONFIG_NETWORK_SECMARK=y CONFIG_IP_SCTP=m CONFIG_FW_LOADER=m CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_LEGACY=y CONFIG_NETDEVICES=y CONFIG_PHYLIB=m CONFIG_MARVELL_PHY=m diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index 0126e66d60cb..e94d266c4b97 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -14,9 +14,9 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_LEGACY=y # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig index a75c65da08b4..87435897fd50 100644 --- a/arch/mips/configs/fuloong2e_defconfig +++ b/arch/mips/configs/fuloong2e_defconfig @@ -34,7 +34,7 @@ CONFIG_MIPS32_N32=y CONFIG_PM=y # CONFIG_SUSPEND is not set CONFIG_HIBERNATION=y -CONFIG_PM_STD_PARTITION="/dev/hda3" +CONFIG_PM_STD_PARTITION="/dev/sda3" CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -114,20 +114,16 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_RAM=m CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_TASK_IOCTL=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_VIA82CXXX=y -CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +CONFIG_PATA_VIA=y +CONFIG_ATA_GENERIC=y +CONFIG_PATA_LEGACY=y CONFIG_NETDEVICES=y CONFIG_MACVLAN=m CONFIG_VETH=m diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig index 0179c7fa014f..e620a2c3eba4 100644 --- a/arch/mips/configs/lasat_defconfig +++ b/arch/mips/configs/lasat_defconfig @@ -35,11 +35,11 @@ CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_CMD64X=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_CMD64X=y +CONFIG_ATA_GENERIC=y +CONFIG_PATA_LEGACY=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_NET_PCI=y diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index 54cc3853d259..004cf52d1b7d 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -108,16 +108,11 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_IDE_TASK_IOCTL=y -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m +CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +CONFIG_PATA_AMD=y CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 61a4460d67d3..5afb4840aec7 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -241,14 +241,11 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y CONFIG_RAID_ATTRS=m CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y @@ -265,6 +262,7 @@ CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_ATA=y CONFIG_ATA_PIIX=y +CONFIG_PATA_LEGACY=y CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m diff --git a/arch/mips/configs/malta_kvm_defconfig b/arch/mips/configs/malta_kvm_defconfig index d41742dd26c8..98f13879bb8f 100644 --- a/arch/mips/configs/malta_kvm_defconfig +++ b/arch/mips/configs/malta_kvm_defconfig @@ -248,17 +248,12 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_IT8213=m CONFIG_BLK_DEV_TC86C001=m CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m +CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y @@ -274,6 +269,13 @@ CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_PATA_IT8213=m +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_MPIIX=y +CONFIG_ATA_GENERIC=y +CONFIG_PATA_LEGACY=y CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m diff --git a/arch/mips/configs/malta_kvm_guest_defconfig b/arch/mips/configs/malta_kvm_guest_defconfig index a7806e83ea0f..3b5d5913f548 100644 --- a/arch/mips/configs/malta_kvm_guest_defconfig +++ b/arch/mips/configs/malta_kvm_guest_defconfig @@ -248,17 +248,12 @@ CONFIG_ATA_OVER_ETH=m CONFIG_VIRTIO_BLK=y CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_IT8213=m CONFIG_BLK_DEV_TC86C001=m CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m +CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y @@ -274,6 +269,13 @@ CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_PATA_IT8213=m +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_MPIIX=y +CONFIG_ATA_GENERIC=y +CONFIG_PATA_LEGACY=y CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m diff --git a/arch/mips/configs/malta_qemu_32r6_defconfig b/arch/mips/configs/malta_qemu_32r6_defconfig index 4bce1f8ebe98..7f50dd67aa8d 100644 --- a/arch/mips/configs/malta_qemu_32r6_defconfig +++ b/arch/mips/configs/malta_qemu_32r6_defconfig @@ -80,15 +80,14 @@ CONFIG_NET_CLS_IND=y CONFIG_DEVTMPFS=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_IDE=y -# CONFIG_IDE_PROC_FS is not set -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_MPIIX=y +CONFIG_ATA_GENERIC=y CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_ADAPTEC is not set diff --git a/arch/mips/configs/maltaaprp_defconfig b/arch/mips/configs/maltaaprp_defconfig index fb042ce86b4b..a9d433a17fcf 100644 --- a/arch/mips/configs/maltaaprp_defconfig +++ b/arch/mips/configs/maltaaprp_defconfig @@ -81,15 +81,14 @@ CONFIG_NET_CLS_IND=y CONFIG_DEVTMPFS=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_IDE=y -# CONFIG_IDE_PROC_FS is not set -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_MPIIX=y +CONFIG_ATA_GENERIC=y CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_ADAPTEC is not set diff --git a/arch/mips/configs/maltasmvp_eva_defconfig b/arch/mips/configs/maltasmvp_eva_defconfig index c83338a39917..2774ef064505 100644 --- a/arch/mips/configs/maltasmvp_eva_defconfig +++ b/arch/mips/configs/maltasmvp_eva_defconfig @@ -85,15 +85,14 @@ CONFIG_NET_CLS_IND=y CONFIG_DEVTMPFS=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_IDE=y -# CONFIG_IDE_PROC_FS is not set -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_MPIIX=y +CONFIG_ATA_GENERIC=y CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_ADAPTEC is not set diff --git a/arch/mips/configs/maltaup_defconfig b/arch/mips/configs/maltaup_defconfig index 62344648eb7a..9bbd2218f0bf 100644 --- a/arch/mips/configs/maltaup_defconfig +++ b/arch/mips/configs/maltaup_defconfig @@ -80,15 +80,14 @@ CONFIG_NET_CLS_IND=y CONFIG_DEVTMPFS=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_IDE=y -# CONFIG_IDE_PROC_FS is not set -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_MPIIX=y +CONFIG_ATA_GENERIC=y CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_ADAPTEC is not set diff --git a/arch/mips/configs/maltaup_xpa_defconfig b/arch/mips/configs/maltaup_xpa_defconfig index c388bff09148..732215732751 100644 --- a/arch/mips/configs/maltaup_xpa_defconfig +++ b/arch/mips/configs/maltaup_xpa_defconfig @@ -244,17 +244,12 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_IT8213=m CONFIG_BLK_DEV_TC86C001=m CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m +CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y @@ -269,6 +264,13 @@ CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_PATA_IT8213=m +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_MPIIX=y +CONFIG_ATA_GENERIC=y +CONFIG_PATA_LEGACY=y CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index 7a346605c498..a2c045fab6c5 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -27,9 +27,9 @@ CONFIG_INET_XFRM_MODE_BEET=m CONFIG_NETWORK_SECMARK=y CONFIG_CONNECTOR=m CONFIG_ATA_OVER_ETH=m -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_LEGACY=y CONFIG_NETDEVICES=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set diff --git a/arch/mips/configs/xilfpga_defconfig b/arch/mips/configs/xilfpga_defconfig new file mode 100644 index 000000000000..ed1dce348320 --- /dev/null +++ b/arch/mips/configs/xilfpga_defconfig @@ -0,0 +1,40 @@ +CONFIG_MACH_XILFPGA=y +# CONFIG_COMPACTION is not set +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_EMBEDDED=y +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_BLOCK is not set +# CONFIG_SUSPEND is not set +# CONFIG_UEVENT_HELPER is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_ALLOW_DEV_COREDUMP is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_XILINX=y +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MIPS_PLATFORM_DEVICES is not set +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_PROC_PAGE_MONITOR is not set +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_PANIC_ON_OOPS=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_FTRACE is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,115200" diff --git a/arch/mips/include/asm/abi.h b/arch/mips/include/asm/abi.h index 37f84078e78a..940760844e2f 100644 --- a/arch/mips/include/asm/abi.h +++ b/arch/mips/include/asm/abi.h @@ -11,19 +11,20 @@ #include <asm/signal.h> #include <asm/siginfo.h> +#include <asm/vdso.h> struct mips_abi { int (* const setup_frame)(void *sig_return, struct ksignal *ksig, struct pt_regs *regs, sigset_t *set); - const unsigned long signal_return_offset; int (* const setup_rt_frame)(void *sig_return, struct ksignal *ksig, struct pt_regs *regs, sigset_t *set); - const unsigned long rt_signal_return_offset; const unsigned long restart; unsigned off_sc_fpregs; unsigned off_sc_fpc_csr; unsigned off_sc_used_math; + + struct mips_vdso_image *vdso; }; #endif /* _ASM_ABI_H */ diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h index f82d3af07931..835b402e4574 100644 --- a/arch/mips/include/asm/atomic.h +++ b/arch/mips/include/asm/atomic.h @@ -507,7 +507,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) * @u: ...unless v is equal to u. * * Atomically adds @a to @v, so long as it was not @u. - * Returns the old value of @v. + * Returns true iff @v was not @u. */ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) { diff --git a/arch/mips/include/asm/bcache.h b/arch/mips/include/asm/bcache.h index 8c34484cea82..a00857b135c3 100644 --- a/arch/mips/include/asm/bcache.h +++ b/arch/mips/include/asm/bcache.h @@ -9,6 +9,7 @@ #ifndef _ASM_BCACHE_H #define _ASM_BCACHE_H +#include <linux/types.h> /* Some R4000 / R4400 / R4600 / R5000 machines may have a non-dma-coherent, chipset implemented caches. On machines with other CPUs the CPU does the @@ -18,6 +19,9 @@ struct bcache_ops { void (*bc_disable)(void); void (*bc_wback_inv)(unsigned long page, unsigned long size); void (*bc_inv)(unsigned long page, unsigned long size); + void (*bc_prefetch_enable)(void); + void (*bc_prefetch_disable)(void); + bool (*bc_prefetch_is_enabled)(void); }; extern void indy_sc_init(void); @@ -46,6 +50,26 @@ static inline void bc_inv(unsigned long page, unsigned long size) bcops->bc_inv(page, size); } +static inline void bc_prefetch_enable(void) +{ + if (bcops->bc_prefetch_enable) + bcops->bc_prefetch_enable(); +} + +static inline void bc_prefetch_disable(void) +{ + if (bcops->bc_prefetch_disable) + bcops->bc_prefetch_disable(); +} + +static inline bool bc_prefetch_is_enabled(void) +{ + if (bcops->bc_prefetch_is_enabled) + return bcops->bc_prefetch_is_enabled(); + + return false; +} + #else /* !defined(CONFIG_BOARD_SCACHE) */ /* Not R4000 / R4400 / R4600 / R5000. */ @@ -54,6 +78,9 @@ static inline void bc_inv(unsigned long page, unsigned long size) #define bc_disable() do { } while (0) #define bc_wback_inv(page, size) do { } while (0) #define bc_inv(page, size) do { } while (0) +#define bc_prefetch_enable() do { } while (0) +#define bc_prefetch_disable() do { } while (0) +#define bc_prefetch_is_enabled() 0 #endif /* !defined(CONFIG_BOARD_SCACHE) */ diff --git a/arch/mips/include/asm/cdmm.h b/arch/mips/include/asm/cdmm.h index bece2064cc8c..c06dbf8ba937 100644 --- a/arch/mips/include/asm/cdmm.h +++ b/arch/mips/include/asm/cdmm.h @@ -84,6 +84,17 @@ void mips_cdmm_driver_unregister(struct mips_cdmm_driver *); module_driver(__mips_cdmm_driver, mips_cdmm_driver_register, \ mips_cdmm_driver_unregister) +/* + * builtin_mips_cdmm_driver() - Helper macro for drivers that don't do anything + * special in init and have no exit. This eliminates some boilerplate. Each + * driver may only use this macro once, and calling it replaces device_initcall + * (or in some cases, the legacy __initcall). This is meant to be a direct + * parallel of module_mips_cdmm_driver() above but without the __exit stuff that + * is not used for builtin cases. + */ +#define builtin_mips_cdmm_driver(__mips_cdmm_driver) \ + builtin_driver(__mips_cdmm_driver, mips_cdmm_driver_register) + /* drivers/tty/mips_ejtag_fdc.c */ #ifdef CONFIG_MIPS_EJTAG_FDC_EARLYCON diff --git a/arch/mips/include/asm/clocksource.h b/arch/mips/include/asm/clocksource.h new file mode 100644 index 000000000000..3deb1d0c1a94 --- /dev/null +++ b/arch/mips/include/asm/clocksource.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2015 Imagination Technologies + * Author: Alex Smith <alex.smith@imgtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_CLOCKSOURCE_H +#define __ASM_CLOCKSOURCE_H + +#include <linux/types.h> + +/* VDSO clocksources. */ +#define VDSO_CLOCK_NONE 0 /* No suitable clocksource. */ +#define VDSO_CLOCK_R4K 1 /* Use the coprocessor 0 count. */ +#define VDSO_CLOCK_GIC 2 /* Use the GIC. */ + +/** + * struct arch_clocksource_data - Architecture-specific clocksource information. + * @vdso_clock_mode: Method the VDSO should use to access the clocksource. + */ +struct arch_clocksource_data { + u8 vdso_clock_mode; +}; + +#endif /* __ASM_CLOCKSOURCE_H */ diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h index c4bd54a7f5ce..a9580097cba8 100644 --- a/arch/mips/include/asm/compat.h +++ b/arch/mips/include/asm/compat.h @@ -130,6 +130,8 @@ typedef union compat_sigval { compat_uptr_t sival_ptr; } compat_sigval_t; +/* Can't use the generic version because si_code and si_errno are swapped */ + #define SI_PAD_SIZE32 (128/sizeof(int) - 3) typedef struct compat_siginfo { @@ -138,57 +140,61 @@ typedef struct compat_siginfo { int si_errno; union { - int _pad[SI_PAD_SIZE32]; + int _pad[128 / sizeof(int) - 3]; /* kill() */ struct { compat_pid_t _pid; /* sender's pid */ - __compat_uid_t _uid; /* sender's uid */ + __compat_uid32_t _uid; /* sender's uid */ } _kill; + /* POSIX.1b timers */ + struct { + compat_timer_t _tid; /* timer id */ + int _overrun; /* overrun count */ + compat_sigval_t _sigval; /* same as below */ + } _timer; + + /* POSIX.1b signals */ + struct { + compat_pid_t _pid; /* sender's pid */ + __compat_uid32_t _uid; /* sender's uid */ + compat_sigval_t _sigval; + } _rt; + /* SIGCHLD */ struct { compat_pid_t _pid; /* which child */ - __compat_uid_t _uid; /* sender's uid */ + __compat_uid32_t _uid; /* sender's uid */ int _status; /* exit code */ compat_clock_t _utime; compat_clock_t _stime; } _sigchld; - /* IRIX SIGCHLD */ - struct { - compat_pid_t _pid; /* which child */ - compat_clock_t _utime; - int _status; /* exit code */ - compat_clock_t _stime; - } _irix_sigchld; - /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ struct { - s32 _addr; /* faulting insn/memory ref. */ + compat_uptr_t _addr; /* faulting insn/memory ref. */ +#ifdef __ARCH_SI_TRAPNO + int _trapno; /* TRAP # which caused the signal */ +#endif + short _addr_lsb; /* LSB of the reported address */ + struct { + compat_uptr_t _lower; + compat_uptr_t _upper; + } _addr_bnd; } _sigfault; - /* SIGPOLL, SIGXFSZ (To do ...) */ + /* SIGPOLL */ struct { - int _band; /* POLL_IN, POLL_OUT, POLL_MSG */ + compat_long_t _band; /* POLL_IN, POLL_OUT, POLL_MSG */ int _fd; } _sigpoll; - /* POSIX.1b timers */ - struct { - timer_t _tid; /* timer id */ - int _overrun; /* overrun count */ - compat_sigval_t _sigval;/* same as below */ - int _sys_private; /* not to be passed to user */ - } _timer; - - /* POSIX.1b signals */ struct { - compat_pid_t _pid; /* sender's pid */ - __compat_uid_t _uid; /* sender's uid */ - compat_sigval_t _sigval; - } _rt; - + compat_uptr_t _call_addr; /* calling insn */ + int _syscall; /* triggering system call number */ + compat_uint_t _arch; /* AUDIT_ARCH_* of syscall */ + } _sigsys; } _sifields; } compat_siginfo_t; diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h index fe67f12ac239..d1e04c943f5f 100644 --- a/arch/mips/include/asm/cpu-features.h +++ b/arch/mips/include/asm/cpu-features.h @@ -131,11 +131,7 @@ #endif #ifndef cpu_has_rixi -# ifdef CONFIG_64BIT -# define cpu_has_rixi (cpu_data[0].options & MIPS_CPU_RIXI) -# else /* CONFIG_32BIT */ -# define cpu_has_rixi ((cpu_data[0].options & MIPS_CPU_RIXI) && !cpu_has_64bits) -# endif +#define cpu_has_rixi (cpu_data[0].options & MIPS_CPU_RIXI) #endif #ifndef cpu_has_mmips diff --git a/arch/mips/include/asm/debug.h b/arch/mips/include/asm/debug.h new file mode 100644 index 000000000000..254f00deb9d5 --- /dev/null +++ b/arch/mips/include/asm/debug.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2015 Imagination Technologies + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __MIPS_ASM_DEBUG_H__ +#define __MIPS_ASM_DEBUG_H__ + +#include <linux/dcache.h> + +/* + * mips_debugfs_dir corresponds to the "mips" directory at the top level + * of the DebugFS hierarchy. MIPS-specific DebugFS entires should be + * placed beneath this directory. + */ +extern struct dentry *mips_debugfs_dir; + +#endif /* __MIPS_ASM_DEBUG_H__ */ diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h index 53b26933b12c..b01a6ff468e0 100644 --- a/arch/mips/include/asm/elf.h +++ b/arch/mips/include/asm/elf.h @@ -8,6 +8,7 @@ #ifndef _ASM_ELF_H #define _ASM_ELF_H +#include <linux/auxvec.h> #include <linux/fs.h> #include <uapi/linux/elf.h> @@ -419,6 +420,12 @@ extern const char *__elf_platform; #define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2) #endif +#define ARCH_DLINFO \ +do { \ + NEW_AUX_ENT(AT_SYSINFO_EHDR, \ + (unsigned long)current->mm->context.vdso); \ +} while (0) + #define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1 struct linux_binprm; extern int arch_setup_additional_pages(struct linux_binprm *bprm, diff --git a/arch/mips/include/asm/fw/fw.h b/arch/mips/include/asm/fw/fw.h index f3e6978aad70..d0ef8b4892bb 100644 --- a/arch/mips/include/asm/fw/fw.h +++ b/arch/mips/include/asm/fw/fw.h @@ -10,21 +10,6 @@ #include <asm/bootinfo.h> /* For cleaner code... */ -enum fw_memtypes { - fw_dontuse, - fw_code, - fw_free, -}; - -typedef struct { - unsigned long base; /* Within KSEG0 */ - unsigned int size; /* bytes */ - enum fw_memtypes type; /* fw_memtypes */ -} fw_memblock_t; - -/* Maximum number of memory block descriptors. */ -#define FW_MAX_MEMBLOCKS 32 - extern int fw_argc; extern int *_fw_argv; extern int *_fw_envp; @@ -38,7 +23,6 @@ extern int *_fw_envp; extern void fw_init_cmdline(void); extern char *fw_getcmdline(void); -extern fw_memblock_t *fw_getmdesc(int); extern void fw_meminit(void); extern char *fw_getenv(char *name); extern unsigned long fw_getenvl(char *name); diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h index 572e63ec2a38..01880b34a209 100644 --- a/arch/mips/include/asm/highmem.h +++ b/arch/mips/include/asm/highmem.h @@ -49,7 +49,6 @@ extern void kunmap(struct page *page); extern void *kmap_atomic(struct page *page); extern void __kunmap_atomic(void *kvaddr); extern void *kmap_atomic_pfn(unsigned long pfn); -extern struct page *kmap_atomic_to_page(void *ptr); #define flush_cache_kmaps() flush_cache_all() diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h index 1461c10c1c4c..71e4096a2145 100644 --- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h +++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h @@ -48,11 +48,6 @@ extern enum bcm47xx_bus_type bcm47xx_bus_type; void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix, bool fallback); -#ifdef CONFIG_BCM47XX_SSB -void bcm47xx_fill_ssb_boardinfo(struct ssb_boardinfo *boardinfo, - const char *prefix); -#endif - void bcm47xx_set_system_type(u16 chip_id); #endif /* __ASM_BCM47XX_H */ diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h index 133336b493b6..dd6005b75e0c 100644 --- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h +++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h @@ -35,6 +35,17 @@ #define SOC_ID_VRX268_2 0x00C /* v1.2 */ #define SOC_ID_GRX288_2 0x00D /* v1.2 */ #define SOC_ID_GRX282_2 0x00E /* v1.2 */ +#define SOC_ID_VRX220 0x000 + +#define SOC_ID_ARX362 0x004 +#define SOC_ID_ARX368 0x005 +#define SOC_ID_ARX382 0x007 +#define SOC_ID_ARX388 0x008 +#define SOC_ID_URX388 0x009 +#define SOC_ID_GRX383 0x010 +#define SOC_ID_GRX369 0x011 +#define SOC_ID_GRX387 0x00F +#define SOC_ID_GRX389 0x012 /* SoC Types */ #define SOC_TYPE_DANUBE 0x01 @@ -43,6 +54,9 @@ #define SOC_TYPE_VR9 0x04 /* v1.1 */ #define SOC_TYPE_VR9_2 0x05 /* v1.2 */ #define SOC_TYPE_AMAZON_SE 0x06 +#define SOC_TYPE_AR10 0x07 +#define SOC_TYPE_GRX390 0x08 +#define SOC_TYPE_VRX220 0x09 /* BOOT_SEL - find what boot media we have */ #define BS_EXT_ROM 0x0 diff --git a/arch/mips/include/asm/mach-malta/malta-dtshim.h b/arch/mips/include/asm/mach-malta/malta-dtshim.h new file mode 100644 index 000000000000..cfd777663c64 --- /dev/null +++ b/arch/mips/include/asm/mach-malta/malta-dtshim.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2015 Imagination Technologies + * Author: Paul Burton <paul.burton@imgtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __MIPS_MALTA_DTSHIM_H__ +#define __MIPS_MALTA_DTSHIM_H__ + +#include <linux/init.h> + +#ifdef CONFIG_MIPS_MALTA + +extern void __init *malta_dt_shim(void *fdt); + +#else /* !CONFIG_MIPS_MALTA */ + +static inline void *malta_dt_shim(void *fdt) +{ + return fdt; +} + +#endif /* !CONFIG_MIPS_MALTA */ + +#endif /* __MIPS_MALTA_DTSHIM_H__ */ diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h index 1976fb815fd1..455d406e8ddf 100644 --- a/arch/mips/include/asm/mach-ralink/mt7620.h +++ b/arch/mips/include/asm/mach-ralink/mt7620.h @@ -13,17 +13,11 @@ #ifndef _MT7620_REGS_H_ #define _MT7620_REGS_H_ -enum mt762x_soc_type { - MT762X_SOC_UNKNOWN = 0, - MT762X_SOC_MT7620A, - MT762X_SOC_MT7620N, - MT762X_SOC_MT7628AN, -}; - #define MT7620_SYSC_BASE 0x10000000 #define SYSC_REG_CHIP_NAME0 0x00 #define SYSC_REG_CHIP_NAME1 0x04 +#define SYSC_REG_EFUSE_CFG 0x08 #define SYSC_REG_CHIP_REV 0x0c #define SYSC_REG_SYSTEM_CONFIG0 0x10 #define SYSC_REG_SYSTEM_CONFIG1 0x14 diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h index bd93014490df..4c9fba68c8b2 100644 --- a/arch/mips/include/asm/mach-ralink/ralink_regs.h +++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h @@ -13,6 +13,23 @@ #ifndef _RALINK_REGS_H_ #define _RALINK_REGS_H_ +enum ralink_soc_type { + RALINK_UNKNOWN = 0, + RT2880_SOC, + RT3883_SOC, + RT305X_SOC_RT3050, + RT305X_SOC_RT3052, + RT305X_SOC_RT3350, + RT305X_SOC_RT3352, + RT305X_SOC_RT5350, + MT762X_SOC_MT7620A, + MT762X_SOC_MT7620N, + MT762X_SOC_MT7621AT, + MT762X_SOC_MT7628AN, + MT762X_SOC_MT7688, +}; +extern enum ralink_soc_type ralink_soc; + extern __iomem void *rt_sysc_membase; extern __iomem void *rt_memc_membase; diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h index 96f731bac79a..2eea79331a14 100644 --- a/arch/mips/include/asm/mach-ralink/rt305x.h +++ b/arch/mips/include/asm/mach-ralink/rt305x.h @@ -13,25 +13,16 @@ #ifndef _RT305X_REGS_H_ #define _RT305X_REGS_H_ -enum rt305x_soc_type { - RT305X_SOC_UNKNOWN = 0, - RT305X_SOC_RT3050, - RT305X_SOC_RT3052, - RT305X_SOC_RT3350, - RT305X_SOC_RT3352, - RT305X_SOC_RT5350, -}; - -extern enum rt305x_soc_type rt305x_soc; +extern enum ralink_soc_type ralink_soc; static inline int soc_is_rt3050(void) { - return rt305x_soc == RT305X_SOC_RT3050; + return ralink_soc == RT305X_SOC_RT3050; } static inline int soc_is_rt3052(void) { - return rt305x_soc == RT305X_SOC_RT3052; + return ralink_soc == RT305X_SOC_RT3052; } static inline int soc_is_rt305x(void) @@ -41,17 +32,17 @@ static inline int soc_is_rt305x(void) static inline int soc_is_rt3350(void) { - return rt305x_soc == RT305X_SOC_RT3350; + return ralink_soc == RT305X_SOC_RT3350; } static inline int soc_is_rt3352(void) { - return rt305x_soc == RT305X_SOC_RT3352; + return ralink_soc == RT305X_SOC_RT3352; } static inline int soc_is_rt5350(void) { - return rt305x_soc == RT305X_SOC_RT5350; + return ralink_soc == RT305X_SOC_RT5350; } #define RT305X_SYSC_BASE 0x10000000 diff --git a/arch/mips/include/asm/mach-xilfpga/irq.h b/arch/mips/include/asm/mach-xilfpga/irq.h new file mode 100644 index 000000000000..0132a5b91f57 --- /dev/null +++ b/arch/mips/include/asm/mach-xilfpga/irq.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2015 Imagination Technologies + * Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __MIPS_ASM_MACH_XILFPGA_IRQ_H__ +#define __MIPS_ASM_MACH_XILFPGA_IRQ_H__ + +#define NR_IRQS 32 + +#include_next <irq.h> + +#endif /* __MIPS_ASM_MACH_XILFPGA_IRQ_H__ */ diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h index 1f1927ab4269..6516e9da5133 100644 --- a/arch/mips/include/asm/mips-cm.h +++ b/arch/mips/include/asm/mips-cm.h @@ -11,6 +11,7 @@ #ifndef __MIPS_ASM_MIPS_CM_H__ #define __MIPS_ASM_MIPS_CM_H__ +#include <linux/bitops.h> #include <linux/errno.h> #include <linux/io.h> #include <linux/types.h> @@ -36,12 +37,12 @@ extern phys_addr_t __mips_cm_phys_base(void); /* * mips_cm_is64 - determine CM register width * - * The CM register width is processor and CM specific. A 64-bit processor - * usually has a 64-bit CM and a 32-bit one has a 32-bit CM but a 64-bit - * processor could come with a 32-bit CM. Moreover, accesses on 64-bit CMs - * can be done either using regular 64-bit load/store instructions, or 32-bit - * load/store instruction on 32-bit register pairs. We opt for using 64-bit - * accesses on 64-bit CMs and kernels and 32-bit in any other case. + * The CM register width is determined by the version of the CM, with CM3 + * introducing 64 bit GCRs and all prior CM versions having 32 bit GCRs. + * However we may run a kernel built for MIPS32 on a system with 64 bit GCRs, + * or vice-versa. This variable indicates the width of the memory accesses + * that the kernel will perform to GCRs, which may differ from the actual + * width of the GCRs. * * It's set to 0 for 32-bit accesses and 1 for 64-bit accesses. */ @@ -125,7 +126,17 @@ static inline u32 read32_gcr_##name(void) \ \ static inline u64 read64_gcr_##name(void) \ { \ - return __raw_readq(addr_gcr_##name()); \ + void __iomem *addr = addr_gcr_##name(); \ + u64 ret; \ + \ + if (mips_cm_is64) { \ + ret = __raw_readq(addr); \ + } else { \ + ret = __raw_readl(addr); \ + ret |= (u64)__raw_readl(addr + 0x4) << 32; \ + } \ + \ + return ret; \ } \ \ static inline unsigned long read_gcr_##name(void) \ @@ -195,6 +206,8 @@ BUILD_CM_R_(gic_status, MIPS_CM_GCB_OFS + 0xd0) BUILD_CM_R_(cpc_status, MIPS_CM_GCB_OFS + 0xf0) BUILD_CM_RW(l2_config, MIPS_CM_GCB_OFS + 0x130) BUILD_CM_RW(sys_config2, MIPS_CM_GCB_OFS + 0x150) +BUILD_CM_RW(l2_pft_control, MIPS_CM_GCB_OFS + 0x300) +BUILD_CM_RW(l2_pft_control_b, MIPS_CM_GCB_OFS + 0x308) /* Core Local & Core Other register accessor functions */ BUILD_CM_Cx_RW(reset_release, 0x00) @@ -245,11 +258,14 @@ BUILD_CM_Cx_R_(tcid_8_priority, 0x80) ((minor) << CM_GCR_REV_MINOR_SHF)) #define CM_REV_CM2 CM_ENCODE_REV(6, 0) +#define CM_REV_CM2_5 CM_ENCODE_REV(7, 0) #define CM_REV_CM3 CM_ENCODE_REV(8, 0) /* GCR_ERROR_CAUSE register fields */ #define CM_GCR_ERROR_CAUSE_ERRTYPE_SHF 27 #define CM_GCR_ERROR_CAUSE_ERRTYPE_MSK (_ULCAST_(0x1f) << 27) +#define CM3_GCR_ERROR_CAUSE_ERRTYPE_SHF 58 +#define CM3_GCR_ERROR_CAUSE_ERRTYPE_MSK GENMASK_ULL(63, 58) #define CM_GCR_ERROR_CAUSE_ERRINFO_SHF 0 #define CM_GCR_ERROR_CAUSE_ERRINGO_MSK (_ULCAST_(0x7ffffff) << 0) @@ -321,6 +337,20 @@ BUILD_CM_Cx_R_(tcid_8_priority, 0x80) #define CM_GCR_SYS_CONFIG2_MAXVPW_SHF 0 #define CM_GCR_SYS_CONFIG2_MAXVPW_MSK (_ULCAST_(0xf) << 0) +/* GCR_L2_PFT_CONTROL register fields */ +#define CM_GCR_L2_PFT_CONTROL_PAGEMASK_SHF 12 +#define CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK (_ULCAST_(0xfffff) << 12) +#define CM_GCR_L2_PFT_CONTROL_PFTEN_SHF 8 +#define CM_GCR_L2_PFT_CONTROL_PFTEN_MSK (_ULCAST_(0x1) << 8) +#define CM_GCR_L2_PFT_CONTROL_NPFT_SHF 0 +#define CM_GCR_L2_PFT_CONTROL_NPFT_MSK (_ULCAST_(0xff) << 0) + +/* GCR_L2_PFT_CONTROL_B register fields */ +#define CM_GCR_L2_PFT_CONTROL_B_CEN_SHF 8 +#define CM_GCR_L2_PFT_CONTROL_B_CEN_MSK (_ULCAST_(0x1) << 8) +#define CM_GCR_L2_PFT_CONTROL_B_PORTID_SHF 0 +#define CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK (_ULCAST_(0xff) << 0) + /* GCR_Cx_COHERENCE register fields */ #define CM_GCR_Cx_COHERENCE_COHDOMAINEN_SHF 0 #define CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK (_ULCAST_(0xff) << 0) @@ -329,11 +359,15 @@ BUILD_CM_Cx_R_(tcid_8_priority, 0x80) #define CM_GCR_Cx_CONFIG_IOCUTYPE_SHF 10 #define CM_GCR_Cx_CONFIG_IOCUTYPE_MSK (_ULCAST_(0x3) << 10) #define CM_GCR_Cx_CONFIG_PVPE_SHF 0 -#define CM_GCR_Cx_CONFIG_PVPE_MSK (_ULCAST_(0x1ff) << 0) +#define CM_GCR_Cx_CONFIG_PVPE_MSK (_ULCAST_(0x3ff) << 0) /* GCR_Cx_OTHER register fields */ #define CM_GCR_Cx_OTHER_CORENUM_SHF 16 #define CM_GCR_Cx_OTHER_CORENUM_MSK (_ULCAST_(0xffff) << 16) +#define CM3_GCR_Cx_OTHER_CORE_SHF 8 +#define CM3_GCR_Cx_OTHER_CORE_MSK (_ULCAST_(0x3f) << 8) +#define CM3_GCR_Cx_OTHER_VP_SHF 0 +#define CM3_GCR_Cx_OTHER_VP_MSK (_ULCAST_(0x7) << 0) /* GCR_Cx_RESET_BASE register fields */ #define CM_GCR_Cx_RESET_BASE_BEVEXCBASE_SHF 12 @@ -444,4 +478,32 @@ static inline unsigned int mips_cm_vp_id(unsigned int cpu) return (core * mips_cm_max_vp_width()) + vp; } +#ifdef CONFIG_MIPS_CM + +/** + * mips_cm_lock_other - lock access to another core + * @core: the other core to be accessed + * @vp: the VP within the other core to be accessed + * + * Call before operating upon a core via the 'other' register region in + * order to prevent the region being moved during access. Must be followed + * by a call to mips_cm_unlock_other. + */ +extern void mips_cm_lock_other(unsigned int core, unsigned int vp); + +/** + * mips_cm_unlock_other - unlock access to another core + * + * Call after operating upon another core via the 'other' register region. + * Must be called after mips_cm_lock_other. + */ +extern void mips_cm_unlock_other(void); + +#else /* !CONFIG_MIPS_CM */ + +static inline void mips_cm_lock_other(unsigned int core) { } +static inline void mips_cm_unlock_other(void) { } + +#endif /* !CONFIG_MIPS_CM */ + #endif /* __MIPS_ASM_MIPS_CM_H__ */ diff --git a/arch/mips/include/asm/mips-cpc.h b/arch/mips/include/asm/mips-cpc.h index f386f32702f1..e09035239e53 100644 --- a/arch/mips/include/asm/mips-cpc.h +++ b/arch/mips/include/asm/mips-cpc.h @@ -149,7 +149,8 @@ BUILD_CPC_Cx_RW(other, 0x10) * core: the other core to be accessed * * Call before operating upon a core via the 'other' register region in - * order to prevent the region being moved during access. Must be followed + * order to prevent the region being moved during access. Must be called + * within the bounds of a mips_cm_{lock,unlock}_other pair, and followed * by a call to mips_cpc_unlock_other. */ extern void mips_cpc_lock_other(unsigned int core); diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index c64781cf649f..e43aca183c99 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -50,7 +50,9 @@ #define CP0_PAGEMASK $5 #define CP0_WIRED $6 #define CP0_INFO $7 +#define CP0_HWRENA $7, 0 #define CP0_BADVADDR $8 +#define CP0_BADINSTR $8, 1 #define CP0_COUNT $9 #define CP0_ENTRYHI $10 #define CP0_COMPARE $11 @@ -58,7 +60,11 @@ #define CP0_CAUSE $13 #define CP0_EPC $14 #define CP0_PRID $15 +#define CP0_EBASE $15, 1 +#define CP0_CMGCRBASE $15, 3 #define CP0_CONFIG $16 +#define CP0_CONFIG3 $16, 3 +#define CP0_CONFIG5 $16, 5 #define CP0_LLADDR $17 #define CP0_WATCHLO $18 #define CP0_WATCHHI $19 @@ -126,15 +132,9 @@ #define R3K_ENTRYLO_N (_ULCAST_(1) << 11) /* MIPS32/64 EntryLo bit definitions */ -#ifdef CONFIG_64BIT -/* as read by dmfc0 */ -#define MIPS_ENTRYLO_XI (_ULCAST_(1) << 62) -#define MIPS_ENTRYLO_RI (_ULCAST_(1) << 63) -#else -/* as read by mfc0 */ -#define MIPS_ENTRYLO_XI (_ULCAST_(1) << 30) -#define MIPS_ENTRYLO_RI (_ULCAST_(1) << 31) -#endif +#define MIPS_ENTRYLO_PFN_SHIFT 6 +#define MIPS_ENTRYLO_XI (_ULCAST_(1) << (BITS_PER_LONG - 2)) +#define MIPS_ENTRYLO_RI (_ULCAST_(1) << (BITS_PER_LONG - 1)) /* * Values for PageMask register diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index 89dd7fed1a57..ad1fccdb8d13 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -33,7 +33,7 @@ #define PAGE_SHIFT 16 #endif #define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) -#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) +#define PAGE_MASK (~(PAGE_SIZE - 1)) /* * This is used for calculating the real page sizes diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h index 59ee6dcf6eed..3f832c3dd8f5 100644 --- a/arch/mips/include/asm/processor.h +++ b/arch/mips/include/asm/processor.h @@ -36,12 +36,6 @@ extern unsigned int vced_count, vcei_count; */ #define HAVE_ARCH_PICK_MMAP_LAYOUT 1 -/* - * A special page (the vdso) is mapped into all processes at the very - * top of the virtual memory space. - */ -#define SPECIAL_PAGES_SIZE PAGE_SIZE - #ifdef CONFIG_32BIT #ifdef CONFIG_KVM_GUEST /* User space process size is limited to 1GB in KVM Guest Mode */ @@ -80,7 +74,7 @@ extern unsigned int vced_count, vcei_count; #endif -#define STACK_TOP ((TASK_SIZE & PAGE_MASK) - SPECIAL_PAGES_SIZE) +#define STACK_TOP (TASK_SIZE & PAGE_MASK) /* * This decides where the kernel will search for a free chunk of vm diff --git a/arch/mips/include/asm/vdso.h b/arch/mips/include/asm/vdso.h index cca56aa40ff4..8f4ca5dd992b 100644 --- a/arch/mips/include/asm/vdso.h +++ b/arch/mips/include/asm/vdso.h @@ -1,29 +1,136 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. + * Copyright (C) 2015 Imagination Technologies + * Author: Alex Smith <alex.smith@imgtec.com> * - * Copyright (C) 2009 Cavium Networks + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. */ #ifndef __ASM_VDSO_H #define __ASM_VDSO_H -#include <linux/types.h> +#include <linux/mm_types.h> +#include <asm/barrier.h> -#ifdef CONFIG_32BIT -struct mips_vdso { - u32 signal_trampoline[2]; - u32 rt_signal_trampoline[2]; +/** + * struct mips_vdso_image - Details of a VDSO image. + * @data: Pointer to VDSO image data (page-aligned). + * @size: Size of the VDSO image data (page-aligned). + * @off_sigreturn: Offset of the sigreturn() trampoline. + * @off_rt_sigreturn: Offset of the rt_sigreturn() trampoline. + * @mapping: Special mapping structure. + * + * This structure contains details of a VDSO image, including the image data + * and offsets of certain symbols required by the kernel. It is generated as + * part of the VDSO build process, aside from the mapping page array, which is + * populated at runtime. + */ +struct mips_vdso_image { + void *data; + unsigned long size; + + unsigned long off_sigreturn; + unsigned long off_rt_sigreturn; + + struct vm_special_mapping mapping; }; -#else /* !CONFIG_32BIT */ -struct mips_vdso { - u32 o32_signal_trampoline[2]; - u32 o32_rt_signal_trampoline[2]; - u32 rt_signal_trampoline[2]; - u32 n32_rt_signal_trampoline[2]; + +/* + * The following structures are auto-generated as part of the build for each + * ABI by genvdso, see arch/mips/vdso/Makefile. + */ + +extern struct mips_vdso_image vdso_image; + +#ifdef CONFIG_MIPS32_O32 +extern struct mips_vdso_image vdso_image_o32; +#endif + +#ifdef CONFIG_MIPS32_N32 +extern struct mips_vdso_image vdso_image_n32; +#endif + +/** + * union mips_vdso_data - Data provided by the kernel for the VDSO. + * @xtime_sec: Current real time (seconds part). + * @xtime_nsec: Current real time (nanoseconds part, shifted). + * @wall_to_mono_sec: Wall-to-monotonic offset (seconds part). + * @wall_to_mono_nsec: Wall-to-monotonic offset (nanoseconds part). + * @seq_count: Counter to synchronise updates (odd = updating). + * @cs_shift: Clocksource shift value. + * @clock_mode: Clocksource to use for time functions. + * @cs_mult: Clocksource multiplier value. + * @cs_cycle_last: Clock cycle value at last update. + * @cs_mask: Clocksource mask value. + * @tz_minuteswest: Minutes west of Greenwich (from timezone). + * @tz_dsttime: Type of DST correction (from timezone). + * + * This structure contains data needed by functions within the VDSO. It is + * populated by the kernel and mapped read-only into user memory. The time + * fields are mirrors of internal data from the timekeeping infrastructure. + * + * Note: Care should be taken when modifying as the layout must remain the same + * for both 64- and 32-bit (for 32-bit userland on 64-bit kernel). + */ +union mips_vdso_data { + struct { + u64 xtime_sec; + u64 xtime_nsec; + u32 wall_to_mono_sec; + u32 wall_to_mono_nsec; + u32 seq_count; + u32 cs_shift; + u8 clock_mode; + u32 cs_mult; + u64 cs_cycle_last; + u64 cs_mask; + s32 tz_minuteswest; + s32 tz_dsttime; + }; + + u8 page[PAGE_SIZE]; }; -#endif /* CONFIG_32BIT */ + +static inline u32 vdso_data_read_begin(const union mips_vdso_data *data) +{ + u32 seq; + + while (true) { + seq = ACCESS_ONCE(data->seq_count); + if (likely(!(seq & 1))) { + /* Paired with smp_wmb() in vdso_data_write_*(). */ + smp_rmb(); + return seq; + } + + cpu_relax(); + } +} + +static inline bool vdso_data_read_retry(const union mips_vdso_data *data, + u32 start_seq) +{ + /* Paired with smp_wmb() in vdso_data_write_*(). */ + smp_rmb(); + return unlikely(data->seq_count != start_seq); +} + +static inline void vdso_data_write_begin(union mips_vdso_data *data) +{ + ++data->seq_count; + + /* Ensure sequence update is written before other data page values. */ + smp_wmb(); +} + +static inline void vdso_data_write_end(union mips_vdso_data *data) +{ + /* Ensure data values are written before updating sequence again. */ + smp_wmb(); + ++data->seq_count; +} #endif /* __ASM_VDSO_H */ diff --git a/arch/mips/include/uapi/asm/Kbuild b/arch/mips/include/uapi/asm/Kbuild index 96fe7395ed8d..f2cf41461146 100644 --- a/arch/mips/include/uapi/asm/Kbuild +++ b/arch/mips/include/uapi/asm/Kbuild @@ -1,9 +1,9 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm -generic-y += auxvec.h generic-y += ipcbuf.h +header-y += auxvec.h header-y += bitfield.h header-y += bitsperlong.h header-y += break.h diff --git a/arch/mips/include/uapi/asm/auxvec.h b/arch/mips/include/uapi/asm/auxvec.h new file mode 100644 index 000000000000..c9c7195272c4 --- /dev/null +++ b/arch/mips/include/uapi/asm/auxvec.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2015 Imagination Technologies + * Author: Alex Smith <alex.smith@imgtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_AUXVEC_H +#define __ASM_AUXVEC_H + +/* Location of VDSO image. */ +#define AT_SYSINFO_EHDR 33 + +#endif /* __ASM_AUXVEC_H */ diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h index cfabadb135d9..90f03a7da665 100644 --- a/arch/mips/include/uapi/asm/unistd.h +++ b/arch/mips/include/uapi/asm/unistd.h @@ -379,16 +379,17 @@ #define __NR_execveat (__NR_Linux + 356) #define __NR_userfaultfd (__NR_Linux + 357) #define __NR_membarrier (__NR_Linux + 358) +#define __NR_mlock2 (__NR_Linux + 359) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 358 +#define __NR_Linux_syscalls 359 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 358 +#define __NR_O32_Linux_syscalls 359 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -715,16 +716,17 @@ #define __NR_execveat (__NR_Linux + 316) #define __NR_userfaultfd (__NR_Linux + 317) #define __NR_membarrier (__NR_Linux + 318) +#define __NR_mlock2 (__NR_Linux + 319) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 318 +#define __NR_Linux_syscalls 319 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 318 +#define __NR_64_Linux_syscalls 319 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -1055,15 +1057,16 @@ #define __NR_execveat (__NR_Linux + 320) #define __NR_userfaultfd (__NR_Linux + 321) #define __NR_membarrier (__NR_Linux + 322) +#define __NR_mlock2 (__NR_Linux + 323) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 322 +#define __NR_Linux_syscalls 323 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 322 +#define __NR_N32_Linux_syscalls 323 #endif /* _UAPI_ASM_UNISTD_H */ diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c index 459cb017306c..934b15b5b575 100644 --- a/arch/mips/jz4740/board-qi_lb60.c +++ b/arch/mips/jz4740/board-qi_lb60.c @@ -25,6 +25,7 @@ #include <linux/power_supply.h> #include <linux/power/jz4740-battery.h> #include <linux/power/gpio-charger.h> +#include <linux/pwm.h> #include <asm/mach-jz4740/gpio.h> #include <asm/mach-jz4740/jz4740_fb.h> @@ -34,8 +35,6 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> -#include <linux/leds_pwm.h> - #include <asm/mach-jz4740/platform.h> #include "clock.h" @@ -399,13 +398,15 @@ static struct platform_device avt2_usb_regulator_device = { } }; +static struct pwm_lookup qi_lb60_pwm_lookup[] = { + PWM_LOOKUP("jz4740-pwm", 4, "pwm-beeper", NULL, 0, + PWM_POLARITY_NORMAL), +}; + /* beeper */ static struct platform_device qi_lb60_pwm_beeper = { .name = "pwm-beeper", .id = -1, - .dev = { - .platform_data = (void *)4, - }, }; /* charger */ @@ -491,6 +492,8 @@ static int __init qi_lb60_init_platform_devices(void) platform_device_register(&jz4740_usb_ohci_device); } + pwm_add_table(qi_lb60_pwm_lookup, ARRAY_SIZE(qi_lb60_pwm_lookup)); + return platform_add_devices(jz_platform_devices, ARRAY_SIZE(jz_platform_devices)); diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index d982be1ea1c3..68e2b7db9348 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_MIPS_MT_FPAFF) += mips-mt-fpaff.o obj-$(CONFIG_MIPS_MT_SMP) += smp-mt.o obj-$(CONFIG_MIPS_CMP) += smp-cmp.o obj-$(CONFIG_MIPS_CPS) += smp-cps.o cps-vec.o +obj-$(CONFIG_MIPS_CPS_NS16550) += cps-vec-ns16550.o obj-$(CONFIG_MIPS_GIC_IPI) += smp-gic.o obj-$(CONFIG_MIPS_SPRAM) += spram.o diff --git a/arch/mips/kernel/cps-vec-ns16550.S b/arch/mips/kernel/cps-vec-ns16550.S new file mode 100644 index 000000000000..6d246ad05638 --- /dev/null +++ b/arch/mips/kernel/cps-vec-ns16550.S @@ -0,0 +1,202 @@ +/* + * Copyright (C) 2015 Imagination Technologies + * Author: Paul Burton <paul.burton@imgtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <asm/addrspace.h> +#include <asm/asm.h> +#include <asm/asm-offsets.h> +#include <asm/mipsregs.h> +#include <asm/regdef.h> +#include <linux/serial_reg.h> + +#define UART_TX_OFS (UART_TX << CONFIG_MIPS_CPS_NS16550_SHIFT) +#define UART_LSR_OFS (UART_LSR << CONFIG_MIPS_CPS_NS16550_SHIFT) + +/** + * _mips_cps_putc() - write a character to the UART + * @a0: ASCII character to write + * @t9: UART base address + */ +LEAF(_mips_cps_putc) +1: lw t0, UART_LSR_OFS(t9) + andi t0, t0, UART_LSR_TEMT + beqz t0, 1b + sb a0, UART_TX_OFS(t9) + jr ra + END(_mips_cps_putc) + +/** + * _mips_cps_puts() - write a string to the UART + * @a0: pointer to NULL-terminated ASCII string + * @t9: UART base address + * + * Write a null-terminated ASCII string to the UART. + */ +NESTED(_mips_cps_puts, 0, ra) + move s7, ra + move s6, a0 + +1: lb a0, 0(s6) + beqz a0, 2f + jal _mips_cps_putc + PTR_ADDIU s6, s6, 1 + b 1b + +2: jr s7 + END(_mips_cps_puts) + +/** + * _mips_cps_putx4 - write a 4b hex value to the UART + * @a0: the 4b value to write to the UART + * @t9: UART base address + * + * Write a single hexadecimal character to the UART. + */ +NESTED(_mips_cps_putx4, 0, ra) + andi a0, a0, 0xf + li t0, '0' + blt a0, 10, 1f + li t0, 'a' + addiu a0, a0, -10 +1: addu a0, a0, t0 + b _mips_cps_putc + END(_mips_cps_putx4) + +/** + * _mips_cps_putx8 - write an 8b hex value to the UART + * @a0: the 8b value to write to the UART + * @t9: UART base address + * + * Write an 8 bit value (ie. 2 hexadecimal characters) to the UART. + */ +NESTED(_mips_cps_putx8, 0, ra) + move s3, ra + move s2, a0 + srl a0, a0, 4 + jal _mips_cps_putx4 + move a0, s2 + move ra, s3 + b _mips_cps_putx4 + END(_mips_cps_putx8) + +/** + * _mips_cps_putx16 - write a 16b hex value to the UART + * @a0: the 16b value to write to the UART + * @t9: UART base address + * + * Write a 16 bit value (ie. 4 hexadecimal characters) to the UART. + */ +NESTED(_mips_cps_putx16, 0, ra) + move s5, ra + move s4, a0 + srl a0, a0, 8 + jal _mips_cps_putx8 + move a0, s4 + move ra, s5 + b _mips_cps_putx8 + END(_mips_cps_putx16) + +/** + * _mips_cps_putx32 - write a 32b hex value to the UART + * @a0: the 32b value to write to the UART + * @t9: UART base address + * + * Write a 32 bit value (ie. 8 hexadecimal characters) to the UART. + */ +NESTED(_mips_cps_putx32, 0, ra) + move s7, ra + move s6, a0 + srl a0, a0, 16 + jal _mips_cps_putx16 + move a0, s6 + move ra, s7 + b _mips_cps_putx16 + END(_mips_cps_putx32) + +#ifdef CONFIG_64BIT + +/** + * _mips_cps_putx64 - write a 64b hex value to the UART + * @a0: the 64b value to write to the UART + * @t9: UART base address + * + * Write a 64 bit value (ie. 16 hexadecimal characters) to the UART. + */ +NESTED(_mips_cps_putx64, 0, ra) + move sp, ra + move s8, a0 + dsrl32 a0, a0, 0 + jal _mips_cps_putx32 + move a0, s8 + move ra, sp + b _mips_cps_putx32 + END(_mips_cps_putx64) + +#define _mips_cps_putxlong _mips_cps_putx64 + +#else /* !CONFIG_64BIT */ + +#define _mips_cps_putxlong _mips_cps_putx32 + +#endif /* !CONFIG_64BIT */ + +/** + * mips_cps_bev_dump() - dump relevant exception state to UART + * @a0: pointer to NULL-terminated ASCII string naming the exception + * + * Write information that may be useful in debugging an exception to the + * UART configured by CONFIG_MIPS_CPS_NS16550_*. As this BEV exception + * will only be run if something goes horribly wrong very early during + * the bringup of a core and it is very likely to be unsafe to perform + * memory accesses at that point (cache state indeterminate, EVA may not + * be configured, coherence may be disabled) let alone have a stack, + * this is all written in assembly using only registers & unmapped + * uncached access to the UART registers. + */ +LEAF(mips_cps_bev_dump) + move s0, ra + move s1, a0 + + li t9, CKSEG1ADDR(CONFIG_MIPS_CPS_NS16550_BASE) + + PTR_LA a0, str_newline + jal _mips_cps_puts + PTR_LA a0, str_bev + jal _mips_cps_puts + move a0, s1 + jal _mips_cps_puts + PTR_LA a0, str_newline + jal _mips_cps_puts + PTR_LA a0, str_newline + jal _mips_cps_puts + +#define DUMP_COP0_REG(reg, name, sz, _mfc0) \ + PTR_LA a0, 8f; \ + jal _mips_cps_puts; \ + _mfc0 a0, reg; \ + jal _mips_cps_putx##sz; \ + PTR_LA a0, str_newline; \ + jal _mips_cps_puts; \ + TEXT(name) + + DUMP_COP0_REG(CP0_CAUSE, "Cause: 0x", 32, mfc0) + DUMP_COP0_REG(CP0_STATUS, "Status: 0x", 32, mfc0) + DUMP_COP0_REG(CP0_EBASE, "EBase: 0x", long, MFC0) + DUMP_COP0_REG(CP0_BADVADDR, "BadVAddr: 0x", long, MFC0) + DUMP_COP0_REG(CP0_BADINSTR, "BadInstr: 0x", 32, mfc0) + + PTR_LA a0, str_newline + jal _mips_cps_puts + jr s0 + END(mips_cps_bev_dump) + +.pushsection .data +str_bev: .asciiz "BEV Exception: " +str_newline: .asciiz "\r\n" +.popsection diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S index 209ded16806b..8fd5a276cad2 100644 --- a/arch/mips/kernel/cps-vec.S +++ b/arch/mips/kernel/cps-vec.S @@ -25,14 +25,32 @@ .set noreorder +#ifdef CONFIG_64BIT +# define STATUS_BITDEPS ST0_KX +#else +# define STATUS_BITDEPS 0 +#endif + +#ifdef CONFIG_MIPS_CPS_NS16550 + +#define DUMP_EXCEP(name) \ + PTR_LA a0, 8f; \ + jal mips_cps_bev_dump; \ + nop; \ + TEXT(name) + +#else /* !CONFIG_MIPS_CPS_NS16550 */ + +#define DUMP_EXCEP(name) + +#endif /* !CONFIG_MIPS_CPS_NS16550 */ + /* * Set dest to non-zero if the core supports the MT ASE, else zero. If * MT is not supported then branch to nomt. */ .macro has_mt dest, nomt - mfc0 \dest, CP0_CONFIG - bgez \dest, \nomt - mfc0 \dest, CP0_CONFIG, 1 + mfc0 \dest, CP0_CONFIG, 1 bgez \dest, \nomt mfc0 \dest, CP0_CONFIG, 2 bgez \dest, \nomt @@ -47,11 +65,9 @@ LEAF(mips_cps_core_entry) /* - * These first 12 bytes will be patched by cps_smp_setup to load the - * base address of the CM GCRs into register v1 and the CCA to use into - * register s0. + * These first 4 bytes will be patched by cps_smp_setup to load the + * CCA to use into register s0. */ - .quad 0 .word 0 /* Check whether we're here due to an NMI */ @@ -71,7 +87,7 @@ not_nmi: mtc0 t0, CP0_CAUSE /* Setup Status */ - li t0, ST0_CU1 | ST0_CU0 + li t0, ST0_CU1 | ST0_CU0 | ST0_BEV | STATUS_BITDEPS mtc0 t0, CP0_STATUS /* @@ -151,6 +167,12 @@ dcache_done: mtc0 t0, CP0_CONFIG ehb + /* Calculate an uncached address for the CM GCRs */ + MFC0 v1, CP0_CMGCRBASE + PTR_SLL v1, v1, 4 + PTR_LI t0, UNCAC_BASE + PTR_ADDU v1, v1, t0 + /* Enter the coherent domain */ li t0, 0xff sw t0, GCR_CL_COHERENCE_OFS(v1) @@ -188,36 +210,42 @@ dcache_done: .org 0x200 LEAF(excep_tlbfill) + DUMP_EXCEP("TLB Fill") b . nop END(excep_tlbfill) .org 0x280 LEAF(excep_xtlbfill) + DUMP_EXCEP("XTLB Fill") b . nop END(excep_xtlbfill) .org 0x300 LEAF(excep_cache) + DUMP_EXCEP("Cache") b . nop END(excep_cache) .org 0x380 LEAF(excep_genex) + DUMP_EXCEP("General") b . nop END(excep_genex) .org 0x400 LEAF(excep_intex) + DUMP_EXCEP("Interrupt") b . nop END(excep_intex) .org 0x480 LEAF(excep_ejtag) + DUMP_EXCEP("EJTAG") PTR_LA k0, ejtag_debug_handler jr k0 nop diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 09a51d091941..6b9064499bd3 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -536,8 +536,7 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c) c->options |= MIPS_CPU_SEGMENTS; if (config3 & MIPS_CONF3_MSA) c->ases |= MIPS_ASE_MSA; - /* Only tested on 32-bit cores */ - if ((config3 & MIPS_CONF3_PW) && config_enabled(CONFIG_32BIT)) { + if (config3 & MIPS_CONF3_PW) { c->htw_seq = 0; c->options |= MIPS_CPU_HTW; } diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c index e5ed7ada1433..1f910563fdf6 100644 --- a/arch/mips/kernel/csrc-r4k.c +++ b/arch/mips/kernel/csrc-r4k.c @@ -28,6 +28,43 @@ static u64 notrace r4k_read_sched_clock(void) return read_c0_count(); } +static inline unsigned int rdhwr_count(void) +{ + unsigned int count; + + __asm__ __volatile__( + " .set push\n" + " .set mips32r2\n" + " rdhwr %0, $2\n" + " .set pop\n" + : "=r" (count)); + + return count; +} + +static bool rdhwr_count_usable(void) +{ + unsigned int prev, curr, i; + + /* + * Older QEMUs have a broken implementation of RDHWR for the CP0 count + * which always returns a constant value. Try to identify this and don't + * use it in the VDSO if it is broken. This workaround can be removed + * once the fix has been in QEMU stable for a reasonable amount of time. + */ + for (i = 0, prev = rdhwr_count(); i < 100; i++) { + curr = rdhwr_count(); + + if (curr != prev) + return true; + + prev = curr; + } + + pr_warn("Not using R4K clocksource in VDSO due to broken RDHWR\n"); + return false; +} + int __init init_r4k_clocksource(void) { if (!cpu_has_counter || !mips_hpt_frequency) @@ -36,6 +73,13 @@ int __init init_r4k_clocksource(void) /* Calculate a somewhat reasonable rating value */ clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000; + /* + * R2 onwards makes the count accessible to user mode so it can be used + * by the VDSO (HWREna is configured by configure_hwrena()). + */ + if (cpu_has_mips_r2_r6 && rdhwr_count_usable()) + clocksource_mips.archdata.vdso_clock_mode = VDSO_CLOCK_R4K; + clocksource_register_hz(&clocksource_mips, mips_hpt_frequency); sched_clock_register(r4k_read_sched_clock, 32, mips_hpt_frequency); diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index ab1478d5a4db..46794d64c0bf 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -134,6 +134,16 @@ void __init check_wait(void) return; } + /* + * MIPSr6 specifies that masked interrupts should unblock an executing + * wait instruction, and thus that it is safe for us to use + * r4k_wait_irqoff. Yippee! + */ + if (cpu_has_mips_r6) { + cpu_wait = r4k_wait_irqoff; + return; + } + switch (current_cpu_type()) { case CPU_R3081: case CPU_R3081E: @@ -155,12 +165,12 @@ void __init check_wait(void) case CPU_4KEC: case CPU_4KSC: case CPU_5KC: + case CPU_5KE: case CPU_25KF: case CPU_PR4450: case CPU_BMIPS3300: case CPU_BMIPS4350: case CPU_BMIPS4380: - case CPU_BMIPS5000: case CPU_CAVIUM_OCTEON: case CPU_CAVIUM_OCTEON_PLUS: case CPU_CAVIUM_OCTEON2: @@ -171,7 +181,9 @@ void __init check_wait(void) case CPU_XLP: cpu_wait = r4k_wait; break; - + case CPU_BMIPS5000: + cpu_wait = r4k_wait_irqoff; + break; case CPU_RM7000: cpu_wait = rm7k_wait_irqoff; break; @@ -196,7 +208,6 @@ void __init check_wait(void) case CPU_INTERAPTIV: case CPU_M5150: case CPU_QEMU_GENERIC: - case CPU_I6400: cpu_wait = r4k_wait; if (read_c0_config7() & MIPS_CONF7_WII) cpu_wait = r4k_wait_irqoff; diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c index b8ceee576cdf..1448c1f43d4e 100644 --- a/arch/mips/kernel/mips-cm.c +++ b/arch/mips/kernel/mips-cm.c @@ -9,6 +9,8 @@ */ #include <linux/errno.h> +#include <linux/percpu.h> +#include <linux/spinlock.h> #include <asm/mips-cm.h> #include <asm/mipsregs.h> @@ -136,6 +138,9 @@ static char *cm3_causes[32] = { "0x19", "0x1a", "0x1b", "0x1c", "0x1d", "0x1e", "0x1f" }; +static DEFINE_PER_CPU_ALIGNED(spinlock_t, cm_core_lock); +static DEFINE_PER_CPU_ALIGNED(unsigned long, cm_core_lock_flags); + phys_addr_t __mips_cm_phys_base(void) { u32 config3 = read_c0_config3(); @@ -200,6 +205,7 @@ int mips_cm_probe(void) { phys_addr_t addr; u32 base_reg; + unsigned cpu; /* * No need to probe again if we have already been @@ -247,38 +253,70 @@ int mips_cm_probe(void) /* determine register width for this CM */ mips_cm_is64 = config_enabled(CONFIG_64BIT) && (mips_cm_revision() >= CM_REV_CM3); + for_each_possible_cpu(cpu) + spin_lock_init(&per_cpu(cm_core_lock, cpu)); + return 0; } -void mips_cm_error_report(void) +void mips_cm_lock_other(unsigned int core, unsigned int vp) { - unsigned long revision = mips_cm_revision(); + unsigned curr_core; + u32 val; + + preempt_disable(); + curr_core = current_cpu_data.core; + spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core), + per_cpu(cm_core_lock_flags, curr_core)); + + if (mips_cm_revision() >= CM_REV_CM3) { + val = core << CM3_GCR_Cx_OTHER_CORE_SHF; + val |= vp << CM3_GCR_Cx_OTHER_VP_SHF; + } else { + BUG_ON(vp != 0); + val = core << CM_GCR_Cx_OTHER_CORENUM_SHF; + } + + write_gcr_cl_other(val); + /* - * CM3 has a 64-bit Error cause register with 0:57 containing the error - * info and 63:58 the error type. For old CMs, everything is contained - * in a single 32-bit register (0:26 and 31:27 respectively). Even - * though the cm_error is u64, we will simply ignore the upper word - * for CM2. + * Ensure the core-other region reflects the appropriate core & + * VP before any accesses to it occur. */ - u64 cm_error = read_gcr_error_cause(); - int cm_error_cause_sft = CM_GCR_ERROR_CAUSE_ERRTYPE_SHF + - ((revision >= CM_REV_CM3) ? 31 : 0); - unsigned long cm_addr = read_gcr_error_addr(); - unsigned long cm_other = read_gcr_error_mult(); + mb(); +} + +void mips_cm_unlock_other(void) +{ + unsigned curr_core = current_cpu_data.core; + + spin_unlock_irqrestore(&per_cpu(cm_core_lock, curr_core), + per_cpu(cm_core_lock_flags, curr_core)); + preempt_enable(); +} + +void mips_cm_error_report(void) +{ + u64 cm_error, cm_addr, cm_other; + unsigned long revision; int ocause, cause; char buf[256]; if (!mips_cm_present()) return; - cause = cm_error >> cm_error_cause_sft; + revision = mips_cm_revision(); - if (!cause) - /* All good */ - return; - - ocause = cm_other >> CM_GCR_ERROR_MULT_ERR2ND_SHF; if (revision < CM_REV_CM3) { /* CM2 */ + cm_error = read_gcr_error_cause(); + cm_addr = read_gcr_error_addr(); + cm_other = read_gcr_error_mult(); + cause = cm_error >> CM_GCR_ERROR_CAUSE_ERRTYPE_SHF; + ocause = cm_other >> CM_GCR_ERROR_MULT_ERR2ND_SHF; + + if (!cause) + return; + if (cause < 16) { unsigned long cca_bits = (cm_error >> 15) & 7; unsigned long tr_bits = (cm_error >> 12) & 7; @@ -310,18 +348,30 @@ void mips_cm_error_report(void) } pr_err("CM_ERROR=%08llx %s <%s>\n", cm_error, cm2_causes[cause], buf); - pr_err("CM_ADDR =%08lx\n", cm_addr); - pr_err("CM_OTHER=%08lx %s\n", cm_other, cm2_causes[ocause]); + pr_err("CM_ADDR =%08llx\n", cm_addr); + pr_err("CM_OTHER=%08llx %s\n", cm_other, cm2_causes[ocause]); } else { /* CM3 */ - /* Used by cause == {1,2,3} */ - unsigned long core_id_bits = (cm_error >> 22) & 0xf; - unsigned long vp_id_bits = (cm_error >> 18) & 0xf; - unsigned long cmd_bits = (cm_error >> 14) & 0xf; - unsigned long cmd_group_bits = (cm_error >> 11) & 0xf; - unsigned long cm3_cca_bits = (cm_error >> 8) & 7; - unsigned long mcp_bits = (cm_error >> 5) & 0xf; - unsigned long cm3_tr_bits = (cm_error >> 1) & 0xf; - unsigned long sched_bit = cm_error & 0x1; + ulong core_id_bits, vp_id_bits, cmd_bits, cmd_group_bits; + ulong cm3_cca_bits, mcp_bits, cm3_tr_bits, sched_bit; + + cm_error = read64_gcr_error_cause(); + cm_addr = read64_gcr_error_addr(); + cm_other = read64_gcr_error_mult(); + cause = cm_error >> CM3_GCR_ERROR_CAUSE_ERRTYPE_SHF; + ocause = cm_other >> CM_GCR_ERROR_MULT_ERR2ND_SHF; + + if (!cause) + return; + + /* Used by cause == {1,2,3} */ + core_id_bits = (cm_error >> 22) & 0xf; + vp_id_bits = (cm_error >> 18) & 0xf; + cmd_bits = (cm_error >> 14) & 0xf; + cmd_group_bits = (cm_error >> 11) & 0xf; + cm3_cca_bits = (cm_error >> 8) & 7; + mcp_bits = (cm_error >> 5) & 0xf; + cm3_tr_bits = (cm_error >> 1) & 0xf; + sched_bit = cm_error & 0x1; if (cause == 1 || cause == 3) { /* Tag ECC */ unsigned long tag_ecc = (cm_error >> 57) & 0x1; @@ -363,12 +413,14 @@ void mips_cm_error_report(void) cm3_cmd_group[cmd_group_bits], cm3_cca_bits, 1 << mcp_bits, cm3_tr[cm3_tr_bits], sched_bit); + } else { + buf[0] = 0; } pr_err("CM_ERROR=%llx %s <%s>\n", cm_error, cm3_causes[cause], buf); - pr_err("CM_ADDR =%lx\n", cm_addr); - pr_err("CM_OTHER=%lx %s\n", cm_other, cm3_causes[ocause]); + pr_err("CM_ADDR =%llx\n", cm_addr); + pr_err("CM_OTHER=%llx %s\n", cm_other, cm3_causes[ocause]); } /* reprime cause register */ diff --git a/arch/mips/kernel/mips-cpc.c b/arch/mips/kernel/mips-cpc.c index 8af4d627b68b..566b8d2c092c 100644 --- a/arch/mips/kernel/mips-cpc.c +++ b/arch/mips/kernel/mips-cpc.c @@ -76,6 +76,12 @@ void mips_cpc_lock_other(unsigned int core) spin_lock_irqsave(&per_cpu(cpc_core_lock, curr_core), per_cpu(cpc_core_lock_flags, curr_core)); write_cpc_cl_other(core << CPC_Cx_OTHER_CORENUM_SHF); + + /* + * Ensure the core-other region reflects the appropriate core & + * VP before any accesses to it occur. + */ + mb(); } void mips_cpc_unlock_other(void) diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c index f2977f00911b..1f5aac7f9ec3 100644 --- a/arch/mips/kernel/mips-r2-to-r6-emul.c +++ b/arch/mips/kernel/mips-r2-to-r6-emul.c @@ -22,6 +22,7 @@ #include <asm/asm.h> #include <asm/branch.h> #include <asm/break.h> +#include <asm/debug.h> #include <asm/fpu.h> #include <asm/fpu_emulator.h> #include <asm/inst.h> @@ -2363,7 +2364,6 @@ static const struct file_operations mipsr2_clear_fops = { static int __init mipsr2_init_debugfs(void) { - extern struct dentry *mips_debugfs_dir; struct dentry *mipsr2_emul; if (!mips_debugfs_dir) diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 65a74e4f0f45..2d23c834ba96 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -594,3 +594,4 @@ EXPORT(sys_call_table) PTR sys_execveat PTR sys_userfaultfd PTR sys_membarrier + PTR sys_mlock2 diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index e732981cf99f..deac63315d0e 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -432,4 +432,5 @@ EXPORT(sys_call_table) PTR sys_execveat PTR sys_userfaultfd PTR sys_membarrier + PTR sys_mlock2 .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index c79484397584..5a69eb48d0a8 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -422,4 +422,5 @@ EXPORT(sysn32_call_table) PTR compat_sys_execveat /* 6320 */ PTR sys_userfaultfd PTR sys_membarrier + PTR sys_mlock2 .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 6369cfd390c6..e4b6d7c97822 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -577,4 +577,5 @@ EXPORT(sys32_call_table) PTR compat_sys_execveat PTR sys_userfaultfd PTR sys_membarrier + PTR sys_mlock2 .size sys32_call_table,.-sys32_call_table diff --git a/arch/mips/kernel/segment.c b/arch/mips/kernel/segment.c index 076ead2a9859..87bc74a5a518 100644 --- a/arch/mips/kernel/segment.c +++ b/arch/mips/kernel/segment.c @@ -10,6 +10,7 @@ #include <linux/debugfs.h> #include <linux/seq_file.h> #include <asm/cpu.h> +#include <asm/debug.h> #include <asm/mipsregs.h> static void build_segment_config(char *str, unsigned int cfg) @@ -91,7 +92,6 @@ static const struct file_operations segments_fops = { static int __init segments_info(void) { - extern struct dentry *mips_debugfs_dir; struct dentry *segments; if (cpu_has_segments) { diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 479515109e5b..66aac55df349 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -33,11 +33,16 @@ #include <asm/cache.h> #include <asm/cdmm.h> #include <asm/cpu.h> +#include <asm/debug.h> #include <asm/sections.h> #include <asm/setup.h> #include <asm/smp-ops.h> #include <asm/prom.h> +#ifdef CONFIG_MIPS_ELF_APPENDED_DTB +const char __section(.appended_dtb) __appended_dtb[0x100000]; +#endif /* CONFIG_MIPS_ELF_APPENDED_DTB */ + struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly; EXPORT_SYMBOL(cpu_data); @@ -616,6 +621,10 @@ static void __init request_crashkernel(struct resource *res) } #endif /* !defined(CONFIG_KEXEC) */ +#define USE_PROM_CMDLINE IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER) +#define USE_DTB_CMDLINE IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB) +#define EXTEND_WITH_PROM IS_ENABLED(CONFIG_MIPS_CMDLINE_EXTEND) + static void __init arch_mem_init(char **cmdline_p) { struct memblock_region *reg; @@ -640,18 +649,24 @@ static void __init arch_mem_init(char **cmdline_p) pr_info("Determined physical RAM map:\n"); print_memory_map(); -#ifdef CONFIG_CMDLINE_BOOL -#ifdef CONFIG_CMDLINE_OVERRIDE +#if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE) strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); #else + if ((USE_PROM_CMDLINE && arcs_cmdline[0]) || + (USE_DTB_CMDLINE && !boot_command_line[0])) + strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); + + if (EXTEND_WITH_PROM && arcs_cmdline[0]) { + strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); + strlcat(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); + } + +#if defined(CONFIG_CMDLINE_BOOL) if (builtin_cmdline[0]) { - strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE); - strlcat(arcs_cmdline, builtin_cmdline, COMMAND_LINE_SIZE); + strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); + strlcat(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); } - strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); #endif -#else - strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); #endif strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 2fec67bfc457..bf792e2839a6 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -36,7 +36,6 @@ #include <asm/ucontext.h> #include <asm/cpu-features.h> #include <asm/war.h> -#include <asm/vdso.h> #include <asm/dsp.h> #include <asm/inst.h> #include <asm/msa.h> @@ -752,16 +751,15 @@ static int setup_rt_frame(void *sig_return, struct ksignal *ksig, struct mips_abi mips_abi = { #ifdef CONFIG_TRAD_SIGNALS .setup_frame = setup_frame, - .signal_return_offset = offsetof(struct mips_vdso, signal_trampoline), #endif .setup_rt_frame = setup_rt_frame, - .rt_signal_return_offset = - offsetof(struct mips_vdso, rt_signal_trampoline), .restart = __NR_restart_syscall, .off_sc_fpregs = offsetof(struct sigcontext, sc_fpregs), .off_sc_fpc_csr = offsetof(struct sigcontext, sc_fpc_csr), .off_sc_used_math = offsetof(struct sigcontext, sc_used_math), + + .vdso = &vdso_image, }; static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) @@ -801,11 +799,11 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) } if (sig_uses_siginfo(&ksig->ka)) - ret = abi->setup_rt_frame(vdso + abi->rt_signal_return_offset, + ret = abi->setup_rt_frame(vdso + abi->vdso->off_rt_sigreturn, ksig, regs, oldset); else - ret = abi->setup_frame(vdso + abi->signal_return_offset, ksig, - regs, oldset); + ret = abi->setup_frame(vdso + abi->vdso->off_sigreturn, + ksig, regs, oldset); signal_setup_done(ret, ksig, 0); } diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index f7e89524e316..4909639aa35b 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -31,7 +31,6 @@ #include <asm/ucontext.h> #include <asm/fpu.h> #include <asm/war.h> -#include <asm/vdso.h> #include <asm/dsp.h> #include "signal-common.h" @@ -406,14 +405,12 @@ static int setup_rt_frame_32(void *sig_return, struct ksignal *ksig, */ struct mips_abi mips_abi_32 = { .setup_frame = setup_frame_32, - .signal_return_offset = - offsetof(struct mips_vdso, o32_signal_trampoline), .setup_rt_frame = setup_rt_frame_32, - .rt_signal_return_offset = - offsetof(struct mips_vdso, o32_rt_signal_trampoline), .restart = __NR_O32_restart_syscall, .off_sc_fpregs = offsetof(struct sigcontext32, sc_fpregs), .off_sc_fpc_csr = offsetof(struct sigcontext32, sc_fpc_csr), .off_sc_used_math = offsetof(struct sigcontext32, sc_used_math), + + .vdso = &vdso_image_o32, }; diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index 0d017fdcaf07..a7bc38430500 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -38,7 +38,6 @@ #include <asm/fpu.h> #include <asm/cpu-features.h> #include <asm/war.h> -#include <asm/vdso.h> #include "signal-common.h" @@ -151,11 +150,11 @@ static int setup_rt_frame_n32(void *sig_return, struct ksignal *ksig, struct mips_abi mips_abi_n32 = { .setup_rt_frame = setup_rt_frame_n32, - .rt_signal_return_offset = - offsetof(struct mips_vdso, n32_rt_signal_trampoline), .restart = __NR_N32_restart_syscall, .off_sc_fpregs = offsetof(struct sigcontext, sc_fpregs), .off_sc_fpc_csr = offsetof(struct sigcontext, sc_fpc_csr), .off_sc_used_math = offsetof(struct sigcontext, sc_used_math), + + .vdso = &vdso_image_n32, }; diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c index c88937745b4e..e04c8057b882 100644 --- a/arch/mips/kernel/smp-cps.c +++ b/arch/mips/kernel/smp-cps.c @@ -8,6 +8,7 @@ * option) any later version. */ +#include <linux/delay.h> #include <linux/io.h> #include <linux/irqchip/mips-gic.h> #include <linux/sched.h> @@ -37,8 +38,9 @@ static unsigned core_vpe_count(unsigned core) if (!config_enabled(CONFIG_MIPS_MT_SMP) || !cpu_has_mipsmt) return 1; - write_gcr_cl_other(core << CM_GCR_Cx_OTHER_CORENUM_SHF); + mips_cm_lock_other(core, 0); cfg = read_gcr_co_config() & CM_GCR_Cx_CONFIG_PVPE_MSK; + mips_cm_unlock_other(); return (cfg >> CM_GCR_Cx_CONFIG_PVPE_SHF) + 1; } @@ -133,11 +135,9 @@ static void __init cps_prepare_cpus(unsigned int max_cpus) /* * Patch the start of mips_cps_core_entry to provide: * - * v1 = CM base address * s0 = kseg0 CCA */ entry_code = (u32 *)&mips_cps_core_entry; - UASM_i_LA(&entry_code, 3, (long)mips_cm_base); uasm_i_addiu(&entry_code, 16, 0, cca); blast_dcache_range((unsigned long)&mips_cps_core_entry, (unsigned long)entry_code); @@ -190,10 +190,11 @@ err_out: static void boot_core(unsigned core) { - u32 access; + u32 access, stat, seq_state; + unsigned timeout; /* Select the appropriate core */ - write_gcr_cl_other(core << CM_GCR_Cx_OTHER_CORENUM_SHF); + mips_cm_lock_other(core, 0); /* Set its reset vector */ write_gcr_co_reset_base(CKSEG1ADDR((unsigned long)mips_cps_core_entry)); @@ -210,12 +211,36 @@ static void boot_core(unsigned core) /* Reset the core */ mips_cpc_lock_other(core); write_cpc_co_cmd(CPC_Cx_CMD_RESET); + + timeout = 100; + while (true) { + stat = read_cpc_co_stat_conf(); + seq_state = stat & CPC_Cx_STAT_CONF_SEQSTATE_MSK; + + /* U6 == coherent execution, ie. the core is up */ + if (seq_state == CPC_Cx_STAT_CONF_SEQSTATE_U6) + break; + + /* Delay a little while before we start warning */ + if (timeout) { + timeout--; + mdelay(10); + continue; + } + + pr_warn("Waiting for core %u to start... STAT_CONF=0x%x\n", + core, stat); + mdelay(1000); + } + mips_cpc_unlock_other(); } else { /* Take the core out of reset */ write_gcr_co_reset_release(0); } + mips_cm_unlock_other(); + /* The core is now powered up */ bitmap_set(core_power, core, 1); } diff --git a/arch/mips/kernel/smp-gic.c b/arch/mips/kernel/smp-gic.c index 5f0ab5bcd01e..9b63829cf929 100644 --- a/arch/mips/kernel/smp-gic.c +++ b/arch/mips/kernel/smp-gic.c @@ -46,9 +46,11 @@ void gic_send_ipi_single(int cpu, unsigned int action) if (mips_cpc_present() && (core != current_cpu_data.core)) { while (!cpumask_test_cpu(cpu, &cpu_coherent_mask)) { + mips_cm_lock_other(core, 0); mips_cpc_lock_other(core); write_cpc_co_cmd(CPC_Cx_CMD_PWRUP); mips_cpc_unlock_other(); + mips_cm_unlock_other(); } } diff --git a/arch/mips/kernel/spinlock_test.c b/arch/mips/kernel/spinlock_test.c index 39f7ab7b0426..f7d86955d1b8 100644 --- a/arch/mips/kernel/spinlock_test.c +++ b/arch/mips/kernel/spinlock_test.c @@ -5,7 +5,7 @@ #include <linux/debugfs.h> #include <linux/export.h> #include <linux/spinlock.h> - +#include <asm/debug.h> static int ss_get(void *data, u64 *val) { @@ -115,8 +115,6 @@ static int multi_get(void *data, u64 *val) DEFINE_SIMPLE_ATTRIBUTE(fops_multi, multi_get, NULL, "%llu\n"); - -extern struct dentry *mips_debugfs_dir; static int __init spinlock_test(void) { struct dentry *d; diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c index 1ba775d24d38..506021f62549 100644 --- a/arch/mips/kernel/stacktrace.c +++ b/arch/mips/kernel/stacktrace.c @@ -12,14 +12,15 @@ * Save stack-backtrace addresses into a stack_trace buffer: */ static void save_raw_context_stack(struct stack_trace *trace, - unsigned long reg29) + unsigned long reg29, int savesched) { unsigned long *sp = (unsigned long *)reg29; unsigned long addr; while (!kstack_end(sp)) { addr = *sp++; - if (__kernel_text_address(addr)) { + if (__kernel_text_address(addr) && + (savesched || !in_sched_functions(addr))) { if (trace->skip > 0) trace->skip--; else @@ -31,7 +32,7 @@ static void save_raw_context_stack(struct stack_trace *trace, } static void save_context_stack(struct stack_trace *trace, - struct task_struct *tsk, struct pt_regs *regs) + struct task_struct *tsk, struct pt_regs *regs, int savesched) { unsigned long sp = regs->regs[29]; #ifdef CONFIG_KALLSYMS @@ -43,20 +44,22 @@ static void save_context_stack(struct stack_trace *trace, (unsigned long)task_stack_page(tsk); if (stack_page && sp >= stack_page && sp <= stack_page + THREAD_SIZE - 32) - save_raw_context_stack(trace, sp); + save_raw_context_stack(trace, sp, savesched); return; } do { - if (trace->skip > 0) - trace->skip--; - else - trace->entries[trace->nr_entries++] = pc; - if (trace->nr_entries >= trace->max_entries) - break; + if (savesched || !in_sched_functions(pc)) { + if (trace->skip > 0) + trace->skip--; + else + trace->entries[trace->nr_entries++] = pc; + if (trace->nr_entries >= trace->max_entries) + break; + } pc = unwind_stack(tsk, &sp, pc, &ra); } while (pc); #else - save_raw_context_stack(trace, sp); + save_raw_context_stack(trace, sp, savesched); #endif } @@ -82,6 +85,6 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) regs->cp0_epc = tsk->thread.reg31; } else prepare_frametrace(regs); - save_context_stack(trace, tsk, regs); + save_context_stack(trace, tsk, regs, tsk == current); } EXPORT_SYMBOL_GPL(save_stack_trace_tsk); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index fdb392b27e81..886cb1976e90 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -37,6 +37,7 @@ #include <linux/irq.h> #include <linux/perf_event.h> +#include <asm/addrspace.h> #include <asm/bootinfo.h> #include <asm/branch.h> #include <asm/break.h> @@ -1856,12 +1857,14 @@ void __noreturn nmi_exception_handler(struct pt_regs *regs) { char str[100]; + nmi_enter(); raw_notifier_call_chain(&nmi_chain, 0, regs); bust_spinlocks(1); snprintf(str, 100, "CPU%d NMI taken, CP0_EPC=%lx\n", smp_processor_id(), regs->cp0_epc); regs->cp0_epc = read_c0_errorepc(); die(str, regs); + nmi_exit(); } #define VECTORSPACING 0x100 /* for EI/VI mode */ @@ -2204,12 +2207,8 @@ void __init trap_init(void) ebase = (unsigned long) __alloc_bootmem(size, 1 << fls(size), 0); } else { -#ifdef CONFIG_KVM_GUEST -#define KVM_GUEST_KSEG0 0x40000000 - ebase = KVM_GUEST_KSEG0; -#else - ebase = CKSEG0; -#endif + ebase = CAC_BASE; + if (cpu_has_mips_r2_r6) ebase += (read_c0_ebase() & 0x3ffff000); } diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c index 990354dd6bde..490cea569d57 100644 --- a/arch/mips/kernel/unaligned.c +++ b/arch/mips/kernel/unaligned.c @@ -85,6 +85,7 @@ #include <asm/branch.h> #include <asm/byteorder.h> #include <asm/cop2.h> +#include <asm/debug.h> #include <asm/fpu.h> #include <asm/fpu_emulator.h> #include <asm/inst.h> @@ -2295,7 +2296,6 @@ sigbus: } #ifdef CONFIG_DEBUG_FS -extern struct dentry *mips_debugfs_dir; static int __init debugfs_unaligned(void) { struct dentry *d; diff --git a/arch/mips/kernel/vdso.c b/arch/mips/kernel/vdso.c index ed2a278722a9..975e99759bab 100644 --- a/arch/mips/kernel/vdso.c +++ b/arch/mips/kernel/vdso.c @@ -1,122 +1,175 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. + * Copyright (C) 2015 Imagination Technologies + * Author: Alex Smith <alex.smith@imgtec.com> * - * Copyright (C) 2009, 2010 Cavium Networks, Inc. + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. */ - -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/init.h> #include <linux/binfmts.h> #include <linux/elf.h> -#include <linux/vmalloc.h> -#include <linux/unistd.h> -#include <linux/random.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/irqchip/mips-gic.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/timekeeper_internal.h> +#include <asm/abi.h> #include <asm/vdso.h> -#include <asm/uasm.h> -#include <asm/processor.h> + +/* Kernel-provided data used by the VDSO. */ +static union mips_vdso_data vdso_data __page_aligned_data; /* - * Including <asm/unistd.h> would give use the 64-bit syscall numbers ... + * Mapping for the VDSO data/GIC pages. The real pages are mapped manually, as + * what we map and where within the area they are mapped is determined at + * runtime. */ -#define __NR_O32_sigreturn 4119 -#define __NR_O32_rt_sigreturn 4193 -#define __NR_N32_rt_sigreturn 6211 +static struct page *no_pages[] = { NULL }; +static struct vm_special_mapping vdso_vvar_mapping = { + .name = "[vvar]", + .pages = no_pages, +}; -static struct page *vdso_page; - -static void __init install_trampoline(u32 *tramp, unsigned int sigreturn) +static void __init init_vdso_image(struct mips_vdso_image *image) { - uasm_i_addiu(&tramp, 2, 0, sigreturn); /* li v0, sigreturn */ - uasm_i_syscall(&tramp, 0); + unsigned long num_pages, i; + + BUG_ON(!PAGE_ALIGNED(image->data)); + BUG_ON(!PAGE_ALIGNED(image->size)); + + num_pages = image->size / PAGE_SIZE; + + for (i = 0; i < num_pages; i++) { + image->mapping.pages[i] = + virt_to_page(image->data + (i * PAGE_SIZE)); + } } static int __init init_vdso(void) { - struct mips_vdso *vdso; - - vdso_page = alloc_page(GFP_KERNEL); - if (!vdso_page) - panic("Cannot allocate vdso"); - - vdso = vmap(&vdso_page, 1, 0, PAGE_KERNEL); - if (!vdso) - panic("Cannot map vdso"); - clear_page(vdso); - - install_trampoline(vdso->rt_signal_trampoline, __NR_rt_sigreturn); -#ifdef CONFIG_32BIT - install_trampoline(vdso->signal_trampoline, __NR_sigreturn); -#else - install_trampoline(vdso->n32_rt_signal_trampoline, - __NR_N32_rt_sigreturn); - install_trampoline(vdso->o32_signal_trampoline, __NR_O32_sigreturn); - install_trampoline(vdso->o32_rt_signal_trampoline, - __NR_O32_rt_sigreturn); + init_vdso_image(&vdso_image); + +#ifdef CONFIG_MIPS32_O32 + init_vdso_image(&vdso_image_o32); #endif - vunmap(vdso); +#ifdef CONFIG_MIPS32_N32 + init_vdso_image(&vdso_image_n32); +#endif return 0; } subsys_initcall(init_vdso); -static unsigned long vdso_addr(unsigned long start) +void update_vsyscall(struct timekeeper *tk) { - unsigned long offset = 0UL; - - if (current->flags & PF_RANDOMIZE) { - offset = get_random_int(); - offset <<= PAGE_SHIFT; - if (TASK_IS_32BIT_ADDR) - offset &= 0xfffffful; - else - offset &= 0xffffffful; + vdso_data_write_begin(&vdso_data); + + vdso_data.xtime_sec = tk->xtime_sec; + vdso_data.xtime_nsec = tk->tkr_mono.xtime_nsec; + vdso_data.wall_to_mono_sec = tk->wall_to_monotonic.tv_sec; + vdso_data.wall_to_mono_nsec = tk->wall_to_monotonic.tv_nsec; + vdso_data.cs_shift = tk->tkr_mono.shift; + + vdso_data.clock_mode = tk->tkr_mono.clock->archdata.vdso_clock_mode; + if (vdso_data.clock_mode != VDSO_CLOCK_NONE) { + vdso_data.cs_mult = tk->tkr_mono.mult; + vdso_data.cs_cycle_last = tk->tkr_mono.cycle_last; + vdso_data.cs_mask = tk->tkr_mono.mask; } - return STACK_TOP + offset; + vdso_data_write_end(&vdso_data); +} + +void update_vsyscall_tz(void) +{ + if (vdso_data.clock_mode != VDSO_CLOCK_NONE) { + vdso_data.tz_minuteswest = sys_tz.tz_minuteswest; + vdso_data.tz_dsttime = sys_tz.tz_dsttime; + } } int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) { - int ret; - unsigned long addr; + struct mips_vdso_image *image = current->thread.abi->vdso; struct mm_struct *mm = current->mm; + unsigned long gic_size, vvar_size, size, base, data_addr, vdso_addr; + struct vm_area_struct *vma; + struct resource gic_res; + int ret; down_write(&mm->mmap_sem); - addr = vdso_addr(mm->start_stack); + /* + * Determine total area size. This includes the VDSO data itself, the + * data page, and the GIC user page if present. Always create a mapping + * for the GIC user area if the GIC is present regardless of whether it + * is the current clocksource, in case it comes into use later on. We + * only map a page even though the total area is 64K, as we only need + * the counter registers at the start. + */ + gic_size = gic_present ? PAGE_SIZE : 0; + vvar_size = gic_size + PAGE_SIZE; + size = vvar_size + image->size; + + base = get_unmapped_area(NULL, 0, size, 0, 0); + if (IS_ERR_VALUE(base)) { + ret = base; + goto out; + } + + data_addr = base + gic_size; + vdso_addr = data_addr + PAGE_SIZE; - addr = get_unmapped_area(NULL, addr, PAGE_SIZE, 0, 0); - if (IS_ERR_VALUE(addr)) { - ret = addr; - goto up_fail; + vma = _install_special_mapping(mm, base, vvar_size, + VM_READ | VM_MAYREAD, + &vdso_vvar_mapping); + if (IS_ERR(vma)) { + ret = PTR_ERR(vma); + goto out; } - ret = install_special_mapping(mm, addr, PAGE_SIZE, - VM_READ|VM_EXEC| - VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC, - &vdso_page); + /* Map GIC user page. */ + if (gic_size) { + ret = gic_get_usm_range(&gic_res); + if (ret) + goto out; + + ret = io_remap_pfn_range(vma, base, + gic_res.start >> PAGE_SHIFT, + gic_size, + pgprot_noncached(PAGE_READONLY)); + if (ret) + goto out; + } + /* Map data page. */ + ret = remap_pfn_range(vma, data_addr, + virt_to_phys(&vdso_data) >> PAGE_SHIFT, + PAGE_SIZE, PAGE_READONLY); if (ret) - goto up_fail; + goto out; + + /* Map VDSO image. */ + vma = _install_special_mapping(mm, vdso_addr, image->size, + VM_READ | VM_EXEC | + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC, + &image->mapping); + if (IS_ERR(vma)) { + ret = PTR_ERR(vma); + goto out; + } - mm->context.vdso = (void *)addr; + mm->context.vdso = (void *)vdso_addr; + ret = 0; -up_fail: +out: up_write(&mm->mmap_sem); return ret; } - -const char *arch_vma_name(struct vm_area_struct *vma) -{ - if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso) - return "[vdso]"; - return NULL; -} diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 07d32a4aea60..0a93e83cd014 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -17,7 +17,9 @@ OUTPUT_ARCH(mips) ENTRY(kernel_entry) PHDRS { text PT_LOAD FLAGS(7); /* RWX */ +#ifndef CONFIG_CAVIUM_OCTEON_SOC note PT_NOTE FLAGS(4); /* R__ */ +#endif /* CAVIUM_OCTEON_SOC */ } #ifdef CONFIG_32BIT @@ -71,7 +73,12 @@ SECTIONS __stop___dbe_table = .; } - NOTES :text :note +#ifdef CONFIG_CAVIUM_OCTEON_SOC +#define NOTES_HEADER +#else /* CONFIG_CAVIUM_OCTEON_SOC */ +#define NOTES_HEADER :note +#endif /* CONFIG_CAVIUM_OCTEON_SOC */ + NOTES :text NOTES_HEADER .dummy : { *(.dummy) } :text _sdata = .; /* Start of data section */ @@ -132,6 +139,11 @@ SECTIONS __appended_dtb = .; /* leave space for appended DTB */ . += 0x100000; +#elif defined(CONFIG_MIPS_ELF_APPENDED_DTB) + .appended_dtb : AT(ADDR(.appended_dtb) - LOAD_OFFSET) { + *(.appended_dtb) + KEEP(*(.appended_dtb)) + } #endif /* * Align to 64K in attempt to eliminate holes before the @@ -181,6 +193,7 @@ SECTIONS DISCARDS /DISCARD/ : { /* ABI crap starts here */ + *(.MIPS.abiflags) *(.MIPS.options) *(.options) *(.pdr) diff --git a/arch/mips/kvm/locore.S b/arch/mips/kvm/locore.S index c567240386a0..7bab3a4e8f7d 100644 --- a/arch/mips/kvm/locore.S +++ b/arch/mips/kvm/locore.S @@ -36,14 +36,6 @@ #define PT_HOST_USERLOCAL PT_EPC #define CP0_DDATA_LO $28,3 -#define CP0_CONFIG3 $16,3 -#define CP0_CONFIG5 $16,5 -#define CP0_EBASE $15,1 - -#define CP0_INTCTL $12,1 -#define CP0_SRSCTL $12,2 -#define CP0_SRSMAP $12,3 -#define CP0_HWRENA $7,0 /* Resume Flags */ #define RESUME_FLAG_HOST (1<<1) /* Resume host? */ diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c index 3fc2e6d70c77..a0706fd4ce0a 100644 --- a/arch/mips/lantiq/clk.c +++ b/arch/mips/lantiq/clk.c @@ -99,6 +99,23 @@ int clk_set_rate(struct clk *clk, unsigned long rate) } EXPORT_SYMBOL(clk_set_rate); +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (unlikely(!clk_good(clk))) + return 0; + if (clk->rates && *clk->rates) { + unsigned long *r = clk->rates; + + while (*r && (*r != rate)) + r++; + if (!*r) { + return clk->rate; + } + } + return rate; +} +EXPORT_SYMBOL(clk_round_rate); + int clk_enable(struct clk *clk) { if (unlikely(!clk_good(clk))) diff --git a/arch/mips/lantiq/clk.h b/arch/mips/lantiq/clk.h index 77e4bdb1fe8c..7376ce817eda 100644 --- a/arch/mips/lantiq/clk.h +++ b/arch/mips/lantiq/clk.h @@ -31,13 +31,18 @@ #define CLOCK_240M 240000000 #define CLOCK_250M 250000000 #define CLOCK_266M 266666666 +#define CLOCK_288M 288888888 #define CLOCK_300M 300000000 #define CLOCK_333M 333333333 +#define CLOCK_360M 360000000 #define CLOCK_393M 393215332 #define CLOCK_400M 400000000 +#define CLOCK_432M 432000000 #define CLOCK_450M 450000000 #define CLOCK_500M 500000000 #define CLOCK_600M 600000000 +#define CLOCK_666M 666666666 +#define CLOCK_720M 720000000 /* clock out speeds */ #define CLOCK_32_768K 32768 @@ -80,4 +85,12 @@ extern unsigned long ltq_vr9_cpu_hz(void); extern unsigned long ltq_vr9_fpi_hz(void); extern unsigned long ltq_vr9_pp32_hz(void); +extern unsigned long ltq_ar10_cpu_hz(void); +extern unsigned long ltq_ar10_fpi_hz(void); +extern unsigned long ltq_ar10_pp32_hz(void); + +extern unsigned long ltq_grx390_cpu_hz(void); +extern unsigned long ltq_grx390_fpi_hz(void); +extern unsigned long ltq_grx390_pp32_hz(void); + #endif diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c index 2c218c3bbca5..2e7f60c9fc5d 100644 --- a/arch/mips/lantiq/irq.c +++ b/arch/mips/lantiq/irq.c @@ -369,8 +369,8 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent) if (of_address_to_resource(node, i, &res)) panic("Failed to get icu memory range"); - if (request_mem_region(res.start, resource_size(&res), - res.name) < 0) + if (!request_mem_region(res.start, resource_size(&res), + res.name)) pr_err("Failed to request icu memory"); ltq_icu_membase[i] = ioremap_nocache(res.start, @@ -449,8 +449,8 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent) if (ret != exin_avail) panic("failed to load external irq resources"); - if (request_mem_region(res.start, resource_size(&res), - res.name) < 0) + if (!request_mem_region(res.start, resource_size(&res), + res.name)) pr_err("Failed to request eiu memory"); ltq_eiu_membase = ioremap_nocache(res.start, diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c index 0db099ecc016..297bcaa6b5d3 100644 --- a/arch/mips/lantiq/prom.c +++ b/arch/mips/lantiq/prom.c @@ -77,8 +77,6 @@ void __init plat_mem_setup(void) * parsed resulting in our memory appearing */ __dt_setup_arch(__dtb_start); - - strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); } void __init device_tree_init(void) diff --git a/arch/mips/lantiq/xway/clk.c b/arch/mips/lantiq/xway/clk.c index 8750dc0a1bf6..07f6d5b0b65e 100644 --- a/arch/mips/lantiq/xway/clk.c +++ b/arch/mips/lantiq/xway/clk.c @@ -4,6 +4,7 @@ * by the Free Software Foundation. * * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + * Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG */ #include <linux/io.h> @@ -25,9 +26,9 @@ static unsigned int ram_clocks[] = { /* legacy xway clock */ #define CGU_SYS 0x10 -/* vr9 clock */ -#define CGU_SYS_VR9 0x0c -#define CGU_IF_CLK_VR9 0x24 +/* vr9, ar10/grx390 clock */ +#define CGU_SYS_XRX 0x0c +#define CGU_IF_CLK_AR10 0x24 unsigned long ltq_danube_fpi_hz(void) { @@ -87,8 +88,9 @@ unsigned long ltq_ar9_fpi_hz(void) unsigned long sys = ltq_ar9_sys_hz(); if (ltq_cgu_r32(CGU_SYS) & BIT(0)) - return sys; - return sys >> 1; + return sys / 3; + else + return sys / 2; } unsigned long ltq_ar9_cpu_hz(void) @@ -104,7 +106,7 @@ unsigned long ltq_vr9_cpu_hz(void) unsigned int cpu_sel; unsigned long clk; - cpu_sel = (ltq_cgu_r32(CGU_SYS_VR9) >> 4) & 0xf; + cpu_sel = (ltq_cgu_r32(CGU_SYS_XRX) >> 4) & 0xf; switch (cpu_sel) { case 0: @@ -145,7 +147,7 @@ unsigned long ltq_vr9_fpi_hz(void) unsigned long clk; cpu_clk = ltq_vr9_cpu_hz(); - ocp_sel = ltq_cgu_r32(CGU_SYS_VR9) & 0x3; + ocp_sel = ltq_cgu_r32(CGU_SYS_XRX) & 0x3; switch (ocp_sel) { case 0: @@ -174,15 +176,18 @@ unsigned long ltq_vr9_fpi_hz(void) unsigned long ltq_vr9_pp32_hz(void) { - unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 3; + unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 0x7; unsigned long clk; switch (clksys) { + case 0: + clk = CLOCK_500M; + break; case 1: - clk = CLOCK_450M; + clk = CLOCK_432M; break; case 2: - clk = CLOCK_300M; + clk = CLOCK_288M; break; default: clk = CLOCK_500M; @@ -191,3 +196,158 @@ unsigned long ltq_vr9_pp32_hz(void) return clk; } + +unsigned long ltq_ar10_cpu_hz(void) +{ + unsigned int clksys; + int cpu_fs = (ltq_cgu_r32(CGU_SYS_XRX) >> 8) & 0x1; + int freq_div = (ltq_cgu_r32(CGU_SYS_XRX) >> 4) & 0x7; + + switch (cpu_fs) { + case 0: + clksys = CLOCK_500M; + break; + case 1: + clksys = CLOCK_600M; + break; + default: + clksys = CLOCK_500M; + break; + } + + switch (freq_div) { + case 0: + return clksys; + case 1: + return clksys >> 1; + case 2: + return clksys >> 2; + default: + return clksys; + } +} + +unsigned long ltq_ar10_fpi_hz(void) +{ + int freq_fpi = (ltq_cgu_r32(CGU_IF_CLK_AR10) >> 25) & 0xf; + + switch (freq_fpi) { + case 1: + return CLOCK_300M; + case 5: + return CLOCK_250M; + case 2: + return CLOCK_150M; + case 6: + return CLOCK_125M; + + default: + return CLOCK_125M; + } +} + +unsigned long ltq_ar10_pp32_hz(void) +{ + unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 0x7; + unsigned long clk; + + switch (clksys) { + case 1: + clk = CLOCK_250M; + break; + case 4: + clk = CLOCK_400M; + break; + default: + clk = CLOCK_250M; + break; + } + + return clk; +} + +unsigned long ltq_grx390_cpu_hz(void) +{ + unsigned int clksys; + int cpu_fs = ((ltq_cgu_r32(CGU_SYS_XRX) >> 9) & 0x3); + int freq_div = ((ltq_cgu_r32(CGU_SYS_XRX) >> 4) & 0x7); + + switch (cpu_fs) { + case 0: + clksys = CLOCK_600M; + break; + case 1: + clksys = CLOCK_666M; + break; + case 2: + clksys = CLOCK_720M; + break; + default: + clksys = CLOCK_600M; + break; + } + + switch (freq_div) { + case 0: + return clksys; + case 1: + return clksys >> 1; + case 2: + return clksys >> 2; + default: + return clksys; + } +} + +unsigned long ltq_grx390_fpi_hz(void) +{ + /* fpi clock is derived from ddr_clk */ + unsigned int clksys; + int cpu_fs = ((ltq_cgu_r32(CGU_SYS_XRX) >> 9) & 0x3); + int freq_div = ((ltq_cgu_r32(CGU_SYS_XRX)) & 0x7); + switch (cpu_fs) { + case 0: + clksys = CLOCK_600M; + break; + case 1: + clksys = CLOCK_666M; + break; + case 2: + clksys = CLOCK_720M; + break; + default: + clksys = CLOCK_600M; + break; + } + + switch (freq_div) { + case 1: + return clksys >> 1; + case 2: + return clksys >> 2; + default: + return clksys >> 1; + } +} + +unsigned long ltq_grx390_pp32_hz(void) +{ + unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 0x7; + unsigned long clk; + + switch (clksys) { + case 1: + clk = CLOCK_250M; + break; + case 2: + clk = CLOCK_432M; + break; + case 4: + clk = CLOCK_400M; + break; + default: + clk = CLOCK_250M; + break; + } + return clk; +} diff --git a/arch/mips/lantiq/xway/prom.c b/arch/mips/lantiq/xway/prom.c index 248429ab2622..8f6e02f1e965 100644 --- a/arch/mips/lantiq/xway/prom.c +++ b/arch/mips/lantiq/xway/prom.c @@ -4,6 +4,7 @@ * by the Free Software Foundation. * * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + * Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG */ #include <linux/export.h> @@ -19,8 +20,11 @@ #define SOC_TWINPASS "Twinpass" #define SOC_AMAZON_SE "Amazon_SE" #define SOC_AR9 "AR9" -#define SOC_GR9 "GR9" -#define SOC_VR9 "VR9" +#define SOC_GR9 "GRX200" +#define SOC_VR9 "xRX200" +#define SOC_VRX220 "xRX220" +#define SOC_AR10 "xRX300" +#define SOC_GRX390 "xRX330" #define COMP_DANUBE "lantiq,danube" #define COMP_TWINPASS "lantiq,twinpass" @@ -28,6 +32,8 @@ #define COMP_AR9 "lantiq,ar9" #define COMP_GR9 "lantiq,gr9" #define COMP_VR9 "lantiq,vr9" +#define COMP_AR10 "lantiq,ar10" +#define COMP_GRX390 "lantiq,grx390" #define PART_SHIFT 12 #define PART_MASK 0x0FFFFFFF @@ -101,6 +107,12 @@ void __init ltq_soc_detect(struct ltq_soc_info *i) i->compatible = COMP_VR9; break; + case SOC_ID_VRX220: + i->name = SOC_VRX220; + i->type = SOC_TYPE_VRX220; + i->compatible = COMP_VR9; + break; + case SOC_ID_GRX282_2: case SOC_ID_GRX288_2: i->name = SOC_GR9; @@ -108,6 +120,25 @@ void __init ltq_soc_detect(struct ltq_soc_info *i) i->compatible = COMP_GR9; break; + case SOC_ID_ARX362: + case SOC_ID_ARX368: + case SOC_ID_ARX382: + case SOC_ID_ARX388: + case SOC_ID_URX388: + i->name = SOC_AR10; + i->type = SOC_TYPE_AR10; + i->compatible = COMP_AR10; + break; + + case SOC_ID_GRX383: + case SOC_ID_GRX369: + case SOC_ID_GRX387: + case SOC_ID_GRX389: + i->name = SOC_GRX390; + i->type = SOC_TYPE_GRX390; + i->compatible = COMP_GRX390; + break; + default: unreachable(); break; diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c index fe68f9ae47c1..bc29bb349e94 100644 --- a/arch/mips/lantiq/xway/reset.c +++ b/arch/mips/lantiq/xway/reset.c @@ -4,6 +4,7 @@ * by the Free Software Foundation. * * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + * Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG */ #include <linux/init.h> @@ -22,9 +23,6 @@ #include "../prom.h" -#define ltq_rcu_w32(x, y) ltq_w32((x), ltq_rcu_membase + (y)) -#define ltq_rcu_r32(x) ltq_r32(ltq_rcu_membase + (x)) - /* reset request register */ #define RCU_RST_REQ 0x0010 /* reset status register */ @@ -32,11 +30,33 @@ /* vr9 gphy registers */ #define RCU_GFS_ADD0_XRX200 0x0020 #define RCU_GFS_ADD1_XRX200 0x0068 +/* xRX300 gphy registers */ +#define RCU_GFS_ADD0_XRX300 0x0020 +#define RCU_GFS_ADD1_XRX300 0x0058 +#define RCU_GFS_ADD2_XRX300 0x00AC +/* xRX330 gphy registers */ +#define RCU_GFS_ADD0_XRX330 0x0020 +#define RCU_GFS_ADD1_XRX330 0x0058 +#define RCU_GFS_ADD2_XRX330 0x00AC +#define RCU_GFS_ADD3_XRX330 0x0264 + +/* xbar BE flag */ +#define RCU_AHB_ENDIAN 0x004C +#define RCU_VR9_BE_AHB1S 0x00000008 /* reboot bit */ #define RCU_RD_GPHY0_XRX200 BIT(31) #define RCU_RD_SRST BIT(30) #define RCU_RD_GPHY1_XRX200 BIT(29) +/* xRX300 bits */ +#define RCU_RD_GPHY0_XRX300 BIT(31) +#define RCU_RD_GPHY1_XRX300 BIT(29) +#define RCU_RD_GPHY2_XRX300 BIT(28) +/* xRX330 bits */ +#define RCU_RD_GPHY0_XRX330 BIT(31) +#define RCU_RD_GPHY1_XRX330 BIT(29) +#define RCU_RD_GPHY2_XRX330 BIT(28) +#define RCU_RD_GPHY3_XRX330 BIT(10) /* reset cause */ #define RCU_STAT_SHIFT 26 @@ -44,9 +64,60 @@ #define RCU_BOOT_SEL(x) ((x >> 18) & 0x7) #define RCU_BOOT_SEL_XRX200(x) (((x >> 17) & 0xf) | ((x >> 8) & 0x10)) +/* dwc2 USB configuration registers */ +#define RCU_USB1CFG 0x0018 +#define RCU_USB2CFG 0x0034 + +/* USB DMA endianness bits */ +#define RCU_USBCFG_HDSEL_BIT BIT(11) +#define RCU_USBCFG_HOST_END_BIT BIT(10) +#define RCU_USBCFG_SLV_END_BIT BIT(9) + +/* USB reset bits */ +#define RCU_USBRESET 0x0010 + +#define USBRESET_BIT BIT(4) + +#define RCU_USBRESET2 0x0048 + +#define USB1RESET_BIT BIT(4) +#define USB2RESET_BIT BIT(5) + +#define RCU_CFG1A 0x0038 +#define RCU_CFG1B 0x003C + +/* USB PMU devices */ +#define PMU_AHBM BIT(15) +#define PMU_USB0 BIT(6) +#define PMU_USB1 BIT(27) + +/* USB PHY PMU devices */ +#define PMU_USB0_P BIT(0) +#define PMU_USB1_P BIT(26) + /* remapped base addr of the reset control unit */ static void __iomem *ltq_rcu_membase; static struct device_node *ltq_rcu_np; +static DEFINE_SPINLOCK(ltq_rcu_lock); + +static void ltq_rcu_w32(uint32_t val, uint32_t reg_off) +{ + ltq_w32(val, ltq_rcu_membase + reg_off); +} + +static uint32_t ltq_rcu_r32(uint32_t reg_off) +{ + return ltq_r32(ltq_rcu_membase + reg_off); +} + +static void ltq_rcu_w32_mask(uint32_t clr, uint32_t set, uint32_t reg_off) +{ + unsigned long flags; + + spin_lock_irqsave(<q_rcu_lock, flags); + ltq_rcu_w32((ltq_rcu_r32(reg_off) & ~(clr)) | (set), reg_off); + spin_unlock_irqrestore(<q_rcu_lock, flags); +} /* This function is used by the watchdog driver */ int ltq_reset_cause(void) @@ -67,15 +138,40 @@ unsigned char ltq_boot_select(void) return RCU_BOOT_SEL(val); } -/* reset / boot a gphy */ -static struct ltq_xrx200_gphy_reset { +struct ltq_gphy_reset { u32 rd; u32 addr; -} xrx200_gphy[] = { +}; + +/* reset / boot a gphy */ +static struct ltq_gphy_reset xrx200_gphy[] = { {RCU_RD_GPHY0_XRX200, RCU_GFS_ADD0_XRX200}, {RCU_RD_GPHY1_XRX200, RCU_GFS_ADD1_XRX200}, }; +/* reset / boot a gphy */ +static struct ltq_gphy_reset xrx300_gphy[] = { + {RCU_RD_GPHY0_XRX300, RCU_GFS_ADD0_XRX300}, + {RCU_RD_GPHY1_XRX300, RCU_GFS_ADD1_XRX300}, + {RCU_RD_GPHY2_XRX300, RCU_GFS_ADD2_XRX300}, +}; + +/* reset / boot a gphy */ +static struct ltq_gphy_reset xrx330_gphy[] = { + {RCU_RD_GPHY0_XRX330, RCU_GFS_ADD0_XRX330}, + {RCU_RD_GPHY1_XRX330, RCU_GFS_ADD1_XRX330}, + {RCU_RD_GPHY2_XRX330, RCU_GFS_ADD2_XRX330}, + {RCU_RD_GPHY3_XRX330, RCU_GFS_ADD3_XRX330}, +}; + +static void xrx200_gphy_boot_addr(struct ltq_gphy_reset *phy_regs, + dma_addr_t dev_addr) +{ + ltq_rcu_w32_mask(0, phy_regs->rd, RCU_RST_REQ); + ltq_rcu_w32(dev_addr, phy_regs->addr); + ltq_rcu_w32_mask(phy_regs->rd, 0, RCU_RST_REQ); +} + /* reset and boot a gphy. these phys only exist on xrx200 SoC */ int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr) { @@ -86,23 +182,34 @@ int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr) return -EINVAL; } - clk = clk_get_sys("1f203000.rcu", "gphy"); - if (IS_ERR(clk)) - return PTR_ERR(clk); - - clk_enable(clk); - - if (id > 1) { - dev_err(dev, "%u is an invalid gphy id\n", id); - return -EINVAL; + if (of_machine_is_compatible("lantiq,vr9")) { + clk = clk_get_sys("1f203000.rcu", "gphy"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + clk_enable(clk); } + dev_info(dev, "booting GPHY%u firmware at %X\n", id, dev_addr); - ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | xrx200_gphy[id].rd, - RCU_RST_REQ); - ltq_rcu_w32(dev_addr, xrx200_gphy[id].addr); - ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~xrx200_gphy[id].rd, - RCU_RST_REQ); + if (of_machine_is_compatible("lantiq,vr9")) { + if (id >= ARRAY_SIZE(xrx200_gphy)) { + dev_err(dev, "%u is an invalid gphy id\n", id); + return -EINVAL; + } + xrx200_gphy_boot_addr(&xrx200_gphy[id], dev_addr); + } else if (of_machine_is_compatible("lantiq,ar10")) { + if (id >= ARRAY_SIZE(xrx300_gphy)) { + dev_err(dev, "%u is an invalid gphy id\n", id); + return -EINVAL; + } + xrx200_gphy_boot_addr(&xrx300_gphy[id], dev_addr); + } else if (of_machine_is_compatible("lantiq,grx390")) { + if (id >= ARRAY_SIZE(xrx330_gphy)) { + dev_err(dev, "%u is an invalid gphy id\n", id); + return -EINVAL; + } + xrx200_gphy_boot_addr(&xrx330_gphy[id], dev_addr); + } return 0; } @@ -200,6 +307,45 @@ static void ltq_machine_power_off(void) unreachable(); } +static void ltq_usb_init(void) +{ + /* Power for USB cores 1 & 2 */ + ltq_pmu_enable(PMU_AHBM); + ltq_pmu_enable(PMU_USB0); + ltq_pmu_enable(PMU_USB1); + + ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | BIT(0), RCU_CFG1A); + ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | BIT(0), RCU_CFG1B); + + /* Enable USB PHY power for cores 1 & 2 */ + ltq_pmu_enable(PMU_USB0_P); + ltq_pmu_enable(PMU_USB1_P); + + /* Configure cores to host mode */ + ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT, + RCU_USB1CFG); + ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT, + RCU_USB2CFG); + + /* Select DMA endianness (Host-endian: big-endian) */ + ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT) + | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG); + ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT) + | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG); + + /* Hard reset USB state machines */ + ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET); + udelay(50 * 1000); + ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET); + + /* Soft reset USB state machines */ + ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) + | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2); + udelay(50 * 1000); + ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) + & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2); +} + static int __init mips_reboot_setup(void) { struct resource res; @@ -216,13 +362,21 @@ static int __init mips_reboot_setup(void) if (of_address_to_resource(ltq_rcu_np, 0, &res)) panic("Failed to get rcu memory range"); - if (request_mem_region(res.start, resource_size(&res), res.name) < 0) + if (!request_mem_region(res.start, resource_size(&res), res.name)) pr_err("Failed to request rcu memory"); ltq_rcu_membase = ioremap_nocache(res.start, resource_size(&res)); if (!ltq_rcu_membase) panic("Failed to remap core memory"); + if (of_machine_is_compatible("lantiq,ar9") || + of_machine_is_compatible("lantiq,vr9")) + ltq_usb_init(); + + if (of_machine_is_compatible("lantiq,vr9")) + ltq_rcu_w32(ltq_rcu_r32(RCU_AHB_ENDIAN) | RCU_VR9_BE_AHB1S, + RCU_AHB_ENDIAN); + _machine_restart = ltq_machine_restart; _machine_halt = ltq_machine_halt; pm_power_off = ltq_machine_power_off; diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c index 2b15491de494..80554e8f6037 100644 --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c @@ -4,11 +4,13 @@ * by the Free Software Foundation. * * Copyright (C) 2011-2012 John Crispin <blogic@openwrt.org> + * Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG */ #include <linux/ioport.h> #include <linux/export.h> #include <linux/clkdev.h> +#include <linux/spinlock.h> #include <linux/of.h> #include <linux/of_platform.h> #include <linux/of_address.h> @@ -18,16 +20,18 @@ #include "../clk.h" #include "../prom.h" -/* clock control register */ +/* clock control register for legacy */ #define CGU_IFCCR 0x0018 #define CGU_IFCCR_VR9 0x0024 -/* system clock register */ +/* system clock register for legacy */ #define CGU_SYS 0x0010 /* pci control register */ #define CGU_PCICR 0x0034 #define CGU_PCICR_VR9 0x0038 /* ephy configuration register */ #define CGU_EPHY 0x10 + +/* Legacy PMU register for ar9, ase, danube */ /* power control register */ #define PMU_PWDCR 0x1C /* power status register */ @@ -41,13 +45,56 @@ /* power status register */ #define PWDSR(x) ((x) ? (PMU_PWDSR1) : (PMU_PWDSR)) + +/* PMU register for ar10 and grx390 */ + +/* First register set */ +#define PMU_CLK_SR 0x20 /* status */ +#define PMU_CLK_CR_A 0x24 /* Enable */ +#define PMU_CLK_CR_B 0x28 /* Disable */ +/* Second register set */ +#define PMU_CLK_SR1 0x30 /* status */ +#define PMU_CLK_CR1_A 0x34 /* Enable */ +#define PMU_CLK_CR1_B 0x38 /* Disable */ +/* Third register set */ +#define PMU_ANA_SR 0x40 /* status */ +#define PMU_ANA_CR_A 0x44 /* Enable */ +#define PMU_ANA_CR_B 0x48 /* Disable */ + +/* Status */ +static u32 pmu_clk_sr[] = { + PMU_CLK_SR, + PMU_CLK_SR1, + PMU_ANA_SR, +}; + +/* Enable */ +static u32 pmu_clk_cr_a[] = { + PMU_CLK_CR_A, + PMU_CLK_CR1_A, + PMU_ANA_CR_A, +}; + +/* Disable */ +static u32 pmu_clk_cr_b[] = { + PMU_CLK_CR_B, + PMU_CLK_CR1_B, + PMU_ANA_CR_B, +}; + +#define PWDCR_EN_XRX(x) (pmu_clk_cr_a[(x)]) +#define PWDCR_DIS_XRX(x) (pmu_clk_cr_b[(x)]) +#define PWDSR_XRX(x) (pmu_clk_sr[(x)]) + /* clock gates that we can en/disable */ #define PMU_USB0_P BIT(0) +#define PMU_ASE_SDIO BIT(2) /* ASE special */ #define PMU_PCI BIT(4) #define PMU_DMA BIT(5) #define PMU_USB0 BIT(6) #define PMU_ASC0 BIT(7) #define PMU_EPHY BIT(7) /* ase */ +#define PMU_USIF BIT(7) /* from vr9 until grx390 */ #define PMU_SPI BIT(8) #define PMU_DFE BIT(9) #define PMU_EBU BIT(10) @@ -56,12 +103,15 @@ #define PMU_AHBS BIT(13) /* vr9 */ #define PMU_FPI BIT(14) #define PMU_AHBM BIT(15) +#define PMU_SDIO BIT(16) /* danube, ar9, vr9 */ #define PMU_ASC1 BIT(17) #define PMU_PPE_QSB BIT(18) #define PMU_PPE_SLL01 BIT(19) +#define PMU_DEU BIT(20) #define PMU_PPE_TC BIT(21) #define PMU_PPE_EMA BIT(22) #define PMU_PPE_DPLUM BIT(23) +#define PMU_PPE_DP BIT(23) #define PMU_PPE_DPLUS BIT(24) #define PMU_USB1_P BIT(26) #define PMU_USB1 BIT(27) @@ -70,30 +120,59 @@ #define PMU_GPHY BIT(30) #define PMU_PCIE_CLK BIT(31) -#define PMU1_PCIE_PHY BIT(0) +#define PMU1_PCIE_PHY BIT(0) /* vr9-specific,moved in ar10/grx390 */ #define PMU1_PCIE_CTL BIT(1) #define PMU1_PCIE_PDI BIT(4) #define PMU1_PCIE_MSI BIT(5) +#define PMU1_CKE BIT(6) +#define PMU1_PCIE1_CTL BIT(17) +#define PMU1_PCIE1_PDI BIT(20) +#define PMU1_PCIE1_MSI BIT(21) +#define PMU1_PCIE2_CTL BIT(25) +#define PMU1_PCIE2_PDI BIT(26) +#define PMU1_PCIE2_MSI BIT(27) + +#define PMU_ANALOG_USB0_P BIT(0) +#define PMU_ANALOG_USB1_P BIT(1) +#define PMU_ANALOG_PCIE0_P BIT(8) +#define PMU_ANALOG_PCIE1_P BIT(9) +#define PMU_ANALOG_PCIE2_P BIT(10) +#define PMU_ANALOG_DSL_AFE BIT(16) +#define PMU_ANALOG_DCDC_2V5 BIT(17) +#define PMU_ANALOG_DCDC_1VX BIT(18) +#define PMU_ANALOG_DCDC_1V0 BIT(19) #define pmu_w32(x, y) ltq_w32((x), pmu_membase + (y)) #define pmu_r32(x) ltq_r32(pmu_membase + (x)) +#define XBAR_ALWAYS_LAST 0x430 +#define XBAR_FPI_BURST_EN BIT(1) +#define XBAR_AHB_BURST_EN BIT(2) + +#define xbar_w32(x, y) ltq_w32((x), ltq_xbar_membase + (y)) +#define xbar_r32(x) ltq_r32(ltq_xbar_membase + (x)) + static void __iomem *pmu_membase; +static void __iomem *ltq_xbar_membase; void __iomem *ltq_cgu_membase; void __iomem *ltq_ebu_membase; static u32 ifccr = CGU_IFCCR; static u32 pcicr = CGU_PCICR; +static DEFINE_SPINLOCK(g_pmu_lock); + /* legacy function kept alive to ease clkdev transition */ void ltq_pmu_enable(unsigned int module) { - int err = 1000000; + int retry = 1000000; + spin_lock(&g_pmu_lock); pmu_w32(pmu_r32(PMU_PWDCR) & ~module, PMU_PWDCR); - do {} while (--err && (pmu_r32(PMU_PWDSR) & module)); + do {} while (--retry && (pmu_r32(PMU_PWDSR) & module)); + spin_unlock(&g_pmu_lock); - if (!err) + if (!retry) panic("activating PMU module failed!"); } EXPORT_SYMBOL(ltq_pmu_enable); @@ -101,7 +180,15 @@ EXPORT_SYMBOL(ltq_pmu_enable); /* legacy function kept alive to ease clkdev transition */ void ltq_pmu_disable(unsigned int module) { + int retry = 1000000; + + spin_lock(&g_pmu_lock); pmu_w32(pmu_r32(PMU_PWDCR) | module, PMU_PWDCR); + do {} while (--retry && (!(pmu_r32(PMU_PWDSR) & module))); + spin_unlock(&g_pmu_lock); + + if (!retry) + pr_warn("deactivating PMU module failed!"); } EXPORT_SYMBOL(ltq_pmu_disable); @@ -123,9 +210,20 @@ static int pmu_enable(struct clk *clk) { int retry = 1000000; - pmu_w32(pmu_r32(PWDCR(clk->module)) & ~clk->bits, - PWDCR(clk->module)); - do {} while (--retry && (pmu_r32(PWDSR(clk->module)) & clk->bits)); + if (of_machine_is_compatible("lantiq,ar10") + || of_machine_is_compatible("lantiq,grx390")) { + pmu_w32(clk->bits, PWDCR_EN_XRX(clk->module)); + do {} while (--retry && + (!(pmu_r32(PWDSR_XRX(clk->module)) & clk->bits))); + + } else { + spin_lock(&g_pmu_lock); + pmu_w32(pmu_r32(PWDCR(clk->module)) & ~clk->bits, + PWDCR(clk->module)); + do {} while (--retry && + (pmu_r32(PWDSR(clk->module)) & clk->bits)); + spin_unlock(&g_pmu_lock); + } if (!retry) panic("activating PMU module failed!"); @@ -136,8 +234,24 @@ static int pmu_enable(struct clk *clk) /* disable a clock gate */ static void pmu_disable(struct clk *clk) { - pmu_w32(pmu_r32(PWDCR(clk->module)) | clk->bits, - PWDCR(clk->module)); + int retry = 1000000; + + if (of_machine_is_compatible("lantiq,ar10") + || of_machine_is_compatible("lantiq,grx390")) { + pmu_w32(clk->bits, PWDCR_DIS_XRX(clk->module)); + do {} while (--retry && + (pmu_r32(PWDSR_XRX(clk->module)) & clk->bits)); + } else { + spin_lock(&g_pmu_lock); + pmu_w32(pmu_r32(PWDCR(clk->module)) | clk->bits, + PWDCR(clk->module)); + do {} while (--retry && + (!(pmu_r32(PWDSR(clk->module)) & clk->bits))); + spin_unlock(&g_pmu_lock); + } + + if (!retry) + pr_warn("deactivating PMU module failed!"); } /* the pci enable helper */ @@ -179,6 +293,16 @@ static void pci_ext_disable(struct clk *clk) ltq_cgu_w32((1 << 31) | (1 << 30), pcicr); } +static void xbar_fpi_burst_disable(void) +{ + u32 reg; + + /* bit 1 as 1 --burst; bit 1 as 0 -- single */ + reg = xbar_r32(XBAR_ALWAYS_LAST); + reg &= ~XBAR_FPI_BURST_EN; + xbar_w32(reg, XBAR_ALWAYS_LAST); +} + /* enable a clockout source */ static int clkout_enable(struct clk *clk) { @@ -202,8 +326,8 @@ static int clkout_enable(struct clk *clk) } /* manage the clock gates via PMU */ -static void clkdev_add_pmu(const char *dev, const char *con, - unsigned int module, unsigned int bits) +static void clkdev_add_pmu(const char *dev, const char *con, bool deactivate, + unsigned int module, unsigned int bits) { struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); @@ -214,6 +338,13 @@ static void clkdev_add_pmu(const char *dev, const char *con, clk->disable = pmu_disable; clk->module = module; clk->bits = bits; + if (deactivate) { + /* + * Disable it during the initialization. Module should enable + * when used + */ + pmu_disable(clk); + } clkdev_add(&clk->cl); } @@ -312,12 +443,12 @@ void __init ltq_soc_init(void) of_address_to_resource(np_ebu, 0, &res_ebu)) panic("Failed to get core resources"); - if ((request_mem_region(res_pmu.start, resource_size(&res_pmu), - res_pmu.name) < 0) || - (request_mem_region(res_cgu.start, resource_size(&res_cgu), - res_cgu.name) < 0) || - (request_mem_region(res_ebu.start, resource_size(&res_ebu), - res_ebu.name) < 0)) + if (!request_mem_region(res_pmu.start, resource_size(&res_pmu), + res_pmu.name) || + !request_mem_region(res_cgu.start, resource_size(&res_cgu), + res_cgu.name) || + !request_mem_region(res_ebu.start, resource_size(&res_ebu), + res_ebu.name)) pr_err("Failed to request core resources"); pmu_membase = ioremap_nocache(res_pmu.start, resource_size(&res_pmu)); @@ -328,17 +459,37 @@ void __init ltq_soc_init(void) if (!pmu_membase || !ltq_cgu_membase || !ltq_ebu_membase) panic("Failed to remap core resources"); + if (of_machine_is_compatible("lantiq,vr9")) { + struct resource res_xbar; + struct device_node *np_xbar = + of_find_compatible_node(NULL, NULL, + "lantiq,xbar-xway"); + + if (!np_xbar) + panic("Failed to load xbar nodes from devicetree"); + if (of_address_to_resource(np_pmu, 0, &res_xbar)) + panic("Failed to get xbar resources"); + if (request_mem_region(res_xbar.start, resource_size(&res_xbar), + res_xbar.name) < 0) + panic("Failed to get xbar resources"); + + ltq_xbar_membase = ioremap_nocache(res_xbar.start, + resource_size(&res_xbar)); + if (!ltq_xbar_membase) + panic("Failed to remap xbar resources"); + } + /* make sure to unprotect the memory region where flash is located */ ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0); /* add our generic xway clocks */ - clkdev_add_pmu("10000000.fpi", NULL, 0, PMU_FPI); - clkdev_add_pmu("1e100400.serial", NULL, 0, PMU_ASC0); - clkdev_add_pmu("1e100a00.gptu", NULL, 0, PMU_GPT); - clkdev_add_pmu("1e100bb0.stp", NULL, 0, PMU_STP); - clkdev_add_pmu("1e104100.dma", NULL, 0, PMU_DMA); - clkdev_add_pmu("1e100800.spi", NULL, 0, PMU_SPI); - clkdev_add_pmu("1e105300.ebu", NULL, 0, PMU_EBU); + clkdev_add_pmu("10000000.fpi", NULL, 0, 0, PMU_FPI); + clkdev_add_pmu("1e100400.serial", NULL, 0, 0, PMU_ASC0); + clkdev_add_pmu("1e100a00.gptu", NULL, 1, 0, PMU_GPT); + clkdev_add_pmu("1e100bb0.stp", NULL, 1, 0, PMU_STP); + clkdev_add_pmu("1e104100.dma", NULL, 1, 0, PMU_DMA); + clkdev_add_pmu("1e100800.spi", NULL, 1, 0, PMU_SPI); + clkdev_add_pmu("1e105300.ebu", NULL, 0, 0, PMU_EBU); clkdev_add_clkout(); /* add the soc dependent clocks */ @@ -346,14 +497,30 @@ void __init ltq_soc_init(void) ifccr = CGU_IFCCR_VR9; pcicr = CGU_PCICR_VR9; } else { - clkdev_add_pmu("1e180000.etop", NULL, 0, PMU_PPE); + clkdev_add_pmu("1e180000.etop", NULL, 1, 0, PMU_PPE); } if (!of_machine_is_compatible("lantiq,ase")) { - clkdev_add_pmu("1e100c00.serial", NULL, 0, PMU_ASC1); + clkdev_add_pmu("1e100c00.serial", NULL, 0, 0, PMU_ASC1); clkdev_add_pci(); } + if (of_machine_is_compatible("lantiq,grx390") || + of_machine_is_compatible("lantiq,ar10")) { + clkdev_add_pmu("1e101000.usb", "phy", 1, 2, PMU_ANALOG_USB0_P); + clkdev_add_pmu("1e106000.usb", "phy", 1, 2, PMU_ANALOG_USB1_P); + /* rc 0 */ + clkdev_add_pmu("1d900000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE0_P); + clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI); + clkdev_add_pmu("1d900000.pcie", "pdi", 1, 1, PMU1_PCIE_PDI); + clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL); + /* rc 1 */ + clkdev_add_pmu("19000000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE1_P); + clkdev_add_pmu("19000000.pcie", "msi", 1, 1, PMU1_PCIE1_MSI); + clkdev_add_pmu("19000000.pcie", "pdi", 1, 1, PMU1_PCIE1_PDI); + clkdev_add_pmu("19000000.pcie", "ctl", 1, 1, PMU1_PCIE1_CTL); + } + if (of_machine_is_compatible("lantiq,ase")) { if (ltq_cgu_r32(CGU_SYS) & (1 << 5)) clkdev_add_static(CLOCK_266M, CLOCK_133M, @@ -361,28 +528,84 @@ void __init ltq_soc_init(void) else clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M, CLOCK_133M); - clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY), - clkdev_add_pmu("1e180000.etop", "ephy", 0, PMU_EPHY); + clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0); + clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P); + clkdev_add_pmu("1e180000.etop", "ppe", 1, 0, PMU_PPE); + clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY); + clkdev_add_pmu("1e180000.etop", "ephy", 1, 0, PMU_EPHY); + clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_ASE_SDIO); + clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); + } else if (of_machine_is_compatible("lantiq,grx390")) { + clkdev_add_static(ltq_grx390_cpu_hz(), ltq_grx390_fpi_hz(), + ltq_grx390_fpi_hz(), ltq_grx390_pp32_hz()); + clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0); + clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1); + /* rc 2 */ + clkdev_add_pmu("1a800000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE2_P); + clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI); + clkdev_add_pmu("1a800000.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI); + clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL); + clkdev_add_pmu("1e108000.eth", NULL, 1, 0, PMU_SWITCH | PMU_PPE_DP); + clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); + clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); + } else if (of_machine_is_compatible("lantiq,ar10")) { + clkdev_add_static(ltq_ar10_cpu_hz(), ltq_ar10_fpi_hz(), + ltq_ar10_fpi_hz(), ltq_ar10_pp32_hz()); + clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0); + clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1); + clkdev_add_pmu("1e108000.eth", NULL, 1, 0, PMU_SWITCH | + PMU_PPE_DP | PMU_PPE_TC); + clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); + clkdev_add_pmu("1f203000.rcu", "gphy", 1, 0, PMU_GPHY); + clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); + clkdev_add_pmu("1e116000.mei", "afe", 1, 2, PMU_ANALOG_DSL_AFE); + clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); } else if (of_machine_is_compatible("lantiq,vr9")) { clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(), ltq_vr9_fpi_hz(), ltq_vr9_pp32_hz()); - clkdev_add_pmu("1d900000.pcie", "phy", 1, PMU1_PCIE_PHY); - clkdev_add_pmu("1d900000.pcie", "bus", 0, PMU_PCIE_CLK); - clkdev_add_pmu("1d900000.pcie", "msi", 1, PMU1_PCIE_MSI); - clkdev_add_pmu("1d900000.pcie", "pdi", 1, PMU1_PCIE_PDI); - clkdev_add_pmu("1d900000.pcie", "ctl", 1, PMU1_PCIE_CTL); - clkdev_add_pmu("1d900000.pcie", "ahb", 0, PMU_AHBM | PMU_AHBS); - clkdev_add_pmu("1e108000.eth", NULL, 0, + clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P); + clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0 | PMU_AHBM); + clkdev_add_pmu("1e106000.usb", "phy", 1, 0, PMU_USB1_P); + clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1 | PMU_AHBM); + clkdev_add_pmu("1d900000.pcie", "phy", 1, 1, PMU1_PCIE_PHY); + clkdev_add_pmu("1d900000.pcie", "bus", 1, 0, PMU_PCIE_CLK); + clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI); + clkdev_add_pmu("1d900000.pcie", "pdi", 1, 1, PMU1_PCIE_PDI); + clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL); + clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS); + + clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); + clkdev_add_pmu("1e108000.eth", NULL, 1, 0, PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM | PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | PMU_PPE_QSB | PMU_PPE_TOP); - clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY); + clkdev_add_pmu("1f203000.rcu", "gphy", 1, 0, PMU_GPHY); + clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO); + clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); + clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); } else if (of_machine_is_compatible("lantiq,ar9")) { clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(), ltq_ar9_fpi_hz(), CLOCK_250M); - clkdev_add_pmu("1e180000.etop", "switch", 0, PMU_SWITCH); + clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0); + clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P); + clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1); + clkdev_add_pmu("1e106000.usb", "phy", 1, 0, PMU_USB1_P); + clkdev_add_pmu("1e180000.etop", "switch", 1, 0, PMU_SWITCH); + clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO); + clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); + clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); + clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0); } else { clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(), ltq_danube_fpi_hz(), ltq_danube_pp32_hz()); + clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0); + clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P); + clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO); + clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); + clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); + clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0); } + + if (of_machine_is_compatible("lantiq,vr9")) + xbar_fpi_burst_disable(); } diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 1e9e900cd3c3..0344e575f522 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -15,4 +15,4 @@ obj-$(CONFIG_CPU_R3000) += r3k_dump_tlb.o obj-$(CONFIG_CPU_TX39XX) += r3k_dump_tlb.o # libgcc-style stuff needed in the kernel -obj-y += ashldi3.o ashrdi3.o cmpdi2.o lshrdi3.o ucmpdi2.o +obj-y += ashldi3.o ashrdi3.o bswapsi.o bswapdi.o cmpdi2.o lshrdi3.o ucmpdi2.o diff --git a/arch/mips/lib/bswapdi.c b/arch/mips/lib/bswapdi.c new file mode 100644 index 000000000000..77e5f9c1f005 --- /dev/null +++ b/arch/mips/lib/bswapdi.c @@ -0,0 +1,15 @@ +#include <linux/module.h> + +unsigned long long __bswapdi2(unsigned long long u) +{ + return (((u) & 0xff00000000000000ull) >> 56) | + (((u) & 0x00ff000000000000ull) >> 40) | + (((u) & 0x0000ff0000000000ull) >> 24) | + (((u) & 0x000000ff00000000ull) >> 8) | + (((u) & 0x00000000ff000000ull) << 8) | + (((u) & 0x0000000000ff0000ull) << 24) | + (((u) & 0x000000000000ff00ull) << 40) | + (((u) & 0x00000000000000ffull) << 56); +} + +EXPORT_SYMBOL(__bswapdi2); diff --git a/arch/mips/lib/bswapsi.c b/arch/mips/lib/bswapsi.c new file mode 100644 index 000000000000..2b302ff121d2 --- /dev/null +++ b/arch/mips/lib/bswapsi.c @@ -0,0 +1,11 @@ +#include <linux/module.h> + +unsigned int __bswapsi2(unsigned int u) +{ + return (((u) & 0xff000000) >> 24) | + (((u) & 0x00ff0000) >> 8) | + (((u) & 0x0000ff00) << 8) | + (((u) & 0x000000ff) << 24); +} + +EXPORT_SYMBOL(__bswapsi2); diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig index 497912b38d8e..8e6e292675b2 100644 --- a/arch/mips/loongson64/Kconfig +++ b/arch/mips/loongson64/Kconfig @@ -120,11 +120,6 @@ config RS780_HPET If unsure, say Yes. -config LOONGSON_SUSPEND - bool - default y - depends on CPU_SUPPORTS_CPUFREQ && SUSPEND - config LOONGSON_UART_BASE bool default y diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson64/common/Makefile index f2e8153e44f5..074d9cb15cd2 100644 --- a/arch/mips/loongson64/common/Makefile +++ b/arch/mips/loongson64/common/Makefile @@ -23,7 +23,7 @@ obj-$(CONFIG_CS5536) += cs5536/ # Suspend Support # -obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o +obj-$(CONFIG_SUSPEND) += pm.o # # Big Memory (SWIOTLB) Support diff --git a/arch/mips/loongson64/lemote-2f/Makefile b/arch/mips/loongson64/lemote-2f/Makefile index 4f9eaa328a16..08b8abcbfef5 100644 --- a/arch/mips/loongson64/lemote-2f/Makefile +++ b/arch/mips/loongson64/lemote-2f/Makefile @@ -8,4 +8,4 @@ obj-y += clock.o machtype.o irq.o reset.o ec_kb3310b.o # Suspend Support # -obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o +obj-$(CONFIG_SUSPEND) += pm.o diff --git a/arch/mips/math-emu/me-debugfs.c b/arch/mips/math-emu/me-debugfs.c index 506a67a98cdf..be650ed7db59 100644 --- a/arch/mips/math-emu/me-debugfs.c +++ b/arch/mips/math-emu/me-debugfs.c @@ -4,6 +4,7 @@ #include <linux/init.h> #include <linux/percpu.h> #include <linux/types.h> +#include <asm/debug.h> #include <asm/fpu_emulator.h> #include <asm/local.h> @@ -27,7 +28,6 @@ static int fpuemu_stat_get(void *data, u64 *val) } DEFINE_SIMPLE_ATTRIBUTE(fops_fpuemu_stat, fpuemu_stat_get, NULL, "%llu\n"); -extern struct dentry *mips_debugfs_dir; static int __init debugfs_fpuemu(void) { struct dentry *d, *dir; diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index 67ede4ef9b8d..b4c64bd3f723 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -28,3 +28,4 @@ obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o obj-$(CONFIG_MIPS_CPU_SCACHE) += sc-mips.o +obj-$(CONFIG_SCACHE_DEBUGFS) += sc-debugfs.o diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c index 11661cbc11a8..d7258a103439 100644 --- a/arch/mips/mm/highmem.c +++ b/arch/mips/mm/highmem.c @@ -118,19 +118,6 @@ void *kmap_atomic_pfn(unsigned long pfn) return (void*) vaddr; } -struct page *kmap_atomic_to_page(void *ptr) -{ - unsigned long idx, vaddr = (unsigned long)ptr; - pte_t *pte; - - if (vaddr < FIXADDR_START) - return virt_to_page(ptr); - - idx = virt_to_fix(vaddr); - pte = kmap_pte - (idx - FIX_KMAP_BEGIN); - return pte_page(*pte); -} - void __init kmap_init(void) { unsigned long kmap_vstart; diff --git a/arch/mips/mm/sc-debugfs.c b/arch/mips/mm/sc-debugfs.c new file mode 100644 index 000000000000..5eefe3281b24 --- /dev/null +++ b/arch/mips/mm/sc-debugfs.c @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2015 Imagination Technologies + * Author: Paul Burton <paul.burton@imgtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <asm/bcache.h> +#include <asm/debug.h> +#include <asm/uaccess.h> +#include <linux/debugfs.h> +#include <linux/init.h> + +static ssize_t sc_prefetch_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + bool enabled = bc_prefetch_is_enabled(); + char buf[3]; + + buf[0] = enabled ? 'Y' : 'N'; + buf[1] = '\n'; + buf[2] = 0; + + return simple_read_from_buffer(user_buf, count, ppos, buf, 2); +} + +static ssize_t sc_prefetch_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + char buf[32]; + ssize_t buf_size; + bool enabled; + int err; + + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + buf[buf_size] = '\0'; + err = strtobool(buf, &enabled); + if (err) + return err; + + if (enabled) + bc_prefetch_enable(); + else + bc_prefetch_disable(); + + return count; +} + +static const struct file_operations sc_prefetch_fops = { + .open = simple_open, + .llseek = default_llseek, + .read = sc_prefetch_read, + .write = sc_prefetch_write, +}; + +static int __init sc_debugfs_init(void) +{ + struct dentry *dir, *file; + + if (!mips_debugfs_dir) + return -ENODEV; + + dir = debugfs_create_dir("l2cache", mips_debugfs_dir); + if (IS_ERR(dir)) + return PTR_ERR(dir); + + file = debugfs_create_file("prefetch", S_IRUGO | S_IWUSR, dir, + NULL, &sc_prefetch_fops); + if (IS_ERR(file)) + return PTR_ERR(file); + + return 0; +} +late_initcall(sc_debugfs_init); diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c index 53ea8391f9bb..3bd0597d9c3d 100644 --- a/arch/mips/mm/sc-mips.c +++ b/arch/mips/mm/sc-mips.c @@ -51,11 +51,69 @@ static void mips_sc_disable(void) /* L2 cache is permanently enabled */ } +static void mips_sc_prefetch_enable(void) +{ + unsigned long pftctl; + + if (mips_cm_revision() < CM_REV_CM2_5) + return; + + /* + * If there is one or more L2 prefetch unit present then enable + * prefetching for both code & data, for all ports. + */ + pftctl = read_gcr_l2_pft_control(); + if (pftctl & CM_GCR_L2_PFT_CONTROL_NPFT_MSK) { + pftctl &= ~CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK; + pftctl |= PAGE_MASK & CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK; + pftctl |= CM_GCR_L2_PFT_CONTROL_PFTEN_MSK; + write_gcr_l2_pft_control(pftctl); + + pftctl = read_gcr_l2_pft_control_b(); + pftctl |= CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK; + pftctl |= CM_GCR_L2_PFT_CONTROL_B_CEN_MSK; + write_gcr_l2_pft_control_b(pftctl); + } +} + +static void mips_sc_prefetch_disable(void) +{ + unsigned long pftctl; + + if (mips_cm_revision() < CM_REV_CM2_5) + return; + + pftctl = read_gcr_l2_pft_control(); + pftctl &= ~CM_GCR_L2_PFT_CONTROL_PFTEN_MSK; + write_gcr_l2_pft_control(pftctl); + + pftctl = read_gcr_l2_pft_control_b(); + pftctl &= ~CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK; + pftctl &= ~CM_GCR_L2_PFT_CONTROL_B_CEN_MSK; + write_gcr_l2_pft_control_b(pftctl); +} + +static bool mips_sc_prefetch_is_enabled(void) +{ + unsigned long pftctl; + + if (mips_cm_revision() < CM_REV_CM2_5) + return false; + + pftctl = read_gcr_l2_pft_control(); + if (!(pftctl & CM_GCR_L2_PFT_CONTROL_NPFT_MSK)) + return false; + return !!(pftctl & CM_GCR_L2_PFT_CONTROL_PFTEN_MSK); +} + static struct bcache_ops mips_sc_ops = { .bc_enable = mips_sc_enable, .bc_disable = mips_sc_disable, .bc_wback_inv = mips_sc_wback_inv, - .bc_inv = mips_sc_inv + .bc_inv = mips_sc_inv, + .bc_prefetch_enable = mips_sc_prefetch_enable, + .bc_prefetch_disable = mips_sc_prefetch_disable, + .bc_prefetch_is_enabled = mips_sc_prefetch_is_enabled, }; /* @@ -162,13 +220,13 @@ static inline int __init mips_sc_probe(void) return 0; tmp = (config2 >> 8) & 0x0f; - if (0 <= tmp && tmp <= 7) + if (tmp <= 7) c->scache.sets = 64 << tmp; else return 0; tmp = (config2 >> 0) & 0x0f; - if (0 <= tmp && tmp <= 7) + if (tmp <= 7) c->scache.ways = tmp + 1; else return 0; @@ -186,6 +244,7 @@ int mips_sc_init(void) int found = mips_sc_probe(); if (found) { mips_sc_enable(); + mips_sc_prefetch_enable(); bcops = &mips_sc_ops; } return found; diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 323d1d302f2b..32e0be27673f 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -311,6 +311,7 @@ static struct uasm_label labels[128]; static struct uasm_reloc relocs[128]; static int check_for_high_segbits; +static bool fill_includes_sw_bits; static unsigned int kscratch_used_mask; @@ -630,8 +631,14 @@ static void build_tlb_write_entry(u32 **p, struct uasm_label **l, static __maybe_unused void build_convert_pte_to_entrylo(u32 **p, unsigned int reg) { - if (cpu_has_rixi) { - UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL)); + if (cpu_has_rixi && _PAGE_NO_EXEC) { + if (fill_includes_sw_bits) { + UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL)); + } else { + UASM_i_SRL(p, reg, reg, ilog2(_PAGE_NO_EXEC)); + UASM_i_ROTR(p, reg, reg, + ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC)); + } } else { #ifdef CONFIG_PHYS_ADDR_T_64BIT uasm_i_dsrl_safe(p, reg, reg, ilog2(_PAGE_GLOBAL)); @@ -1005,21 +1012,7 @@ static void build_update_entries(u32 **p, unsigned int tmp, unsigned int ptep) * 64bit address support (36bit on a 32bit CPU) in a 32bit * Kernel is a special case. Only a few CPUs use it. */ -#ifdef CONFIG_PHYS_ADDR_T_64BIT - if (cpu_has_64bits) { - uasm_i_ld(p, tmp, 0, ptep); /* get even pte */ - uasm_i_ld(p, ptep, sizeof(pte_t), ptep); /* get odd pte */ - if (cpu_has_rixi) { - UASM_i_ROTR(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); - UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */ - UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); - } else { - uasm_i_dsrl_safe(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */ - UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */ - uasm_i_dsrl_safe(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */ - } - UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */ - } else { + if (config_enabled(CONFIG_PHYS_ADDR_T_64BIT) && !cpu_has_64bits) { int pte_off_even = sizeof(pte_t) / 2; int pte_off_odd = pte_off_even + sizeof(pte_t); #ifdef CONFIG_XPA @@ -1043,31 +1036,23 @@ static void build_update_entries(u32 **p, unsigned int tmp, unsigned int ptep) uasm_i_mthc0(p, tmp, C0_ENTRYLO0); uasm_i_mthc0(p, ptep, C0_ENTRYLO1); #endif + return; } -#else + UASM_i_LW(p, tmp, 0, ptep); /* get even pte */ UASM_i_LW(p, ptep, sizeof(pte_t), ptep); /* get odd pte */ if (r45k_bvahwbug()) build_tlb_probe_entry(p); - if (cpu_has_rixi) { - UASM_i_ROTR(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); - if (r4k_250MHZhwbug()) - UASM_i_MTC0(p, 0, C0_ENTRYLO0); - UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */ - UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); - } else { - UASM_i_SRL(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */ - if (r4k_250MHZhwbug()) - UASM_i_MTC0(p, 0, C0_ENTRYLO0); - UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */ - UASM_i_SRL(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */ - if (r45k_bvahwbug()) - uasm_i_mfc0(p, tmp, C0_INDEX); - } + build_convert_pte_to_entrylo(p, tmp); + if (r4k_250MHZhwbug()) + UASM_i_MTC0(p, 0, C0_ENTRYLO0); + UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */ + build_convert_pte_to_entrylo(p, ptep); + if (r45k_bvahwbug()) + uasm_i_mfc0(p, tmp, C0_INDEX); if (r4k_250MHZhwbug()) UASM_i_MTC0(p, 0, C0_ENTRYLO1); UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */ -#endif } struct mips_huge_tlb_info { @@ -2299,6 +2284,10 @@ static void config_htw_params(void) /* re-initialize the PTI field including the even/odd bit */ pwfield &= ~MIPS_PWFIELD_PTI_MASK; pwfield |= PAGE_SHIFT << MIPS_PWFIELD_PTI_SHIFT; + if (CONFIG_PGTABLE_LEVELS >= 3) { + pwfield &= ~MIPS_PWFIELD_MDI_MASK; + pwfield |= PMD_SHIFT << MIPS_PWFIELD_MDI_SHIFT; + } /* Set the PTEI right shift */ ptei = _PAGE_GLOBAL_SHIFT << MIPS_PWFIELD_PTEI_SHIFT; pwfield |= ptei; @@ -2320,9 +2309,11 @@ static void config_htw_params(void) pwsize = ilog2(PTRS_PER_PGD) << MIPS_PWSIZE_GDW_SHIFT; pwsize |= ilog2(PTRS_PER_PTE) << MIPS_PWSIZE_PTW_SHIFT; + if (CONFIG_PGTABLE_LEVELS >= 3) + pwsize |= ilog2(PTRS_PER_PMD) << MIPS_PWSIZE_MDW_SHIFT; /* If XPA has been enabled, PTEs are 64-bit in size. */ - if (read_c0_pagegrain() & PG_ELPA) + if (config_enabled(CONFIG_64BITS) || (read_c0_pagegrain() & PG_ELPA)) pwsize |= 1; write_c0_pwsize(pwsize); @@ -2360,6 +2351,41 @@ static void config_xpa_params(void) #endif } +static void check_pabits(void) +{ + unsigned long entry; + unsigned pabits, fillbits; + + if (!cpu_has_rixi || !_PAGE_NO_EXEC) { + /* + * We'll only be making use of the fact that we can rotate bits + * into the fill if the CPU supports RIXI, so don't bother + * probing this for CPUs which don't. + */ + return; + } + + write_c0_entrylo0(~0ul); + back_to_back_c0_hazard(); + entry = read_c0_entrylo0(); + + /* clear all non-PFN bits */ + entry &= ~((1 << MIPS_ENTRYLO_PFN_SHIFT) - 1); + entry &= ~(MIPS_ENTRYLO_RI | MIPS_ENTRYLO_XI); + + /* find a lower bound on PABITS, and upper bound on fill bits */ + pabits = fls_long(entry) + 6; + fillbits = max_t(int, (int)BITS_PER_LONG - pabits, 0); + + /* minus the RI & XI bits */ + fillbits -= min_t(unsigned, fillbits, 2); + + if (fillbits >= ilog2(_PAGE_NO_EXEC)) + fill_includes_sw_bits = true; + + pr_debug("Entry* registers contain %u fill bits\n", fillbits); +} + void build_tlb_refill_handler(void) { /* @@ -2370,6 +2396,7 @@ void build_tlb_refill_handler(void) static int run_once = 0; output_pgtable_bits_defines(); + check_pabits(); #ifdef CONFIG_64BIT check_for_high_segbits = current_cpu_data.vmbits > (PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3); diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile index ea35587a5c29..5827af77c18e 100644 --- a/arch/mips/mti-malta/Makefile +++ b/arch/mips/mti-malta/Makefile @@ -5,9 +5,18 @@ # Copyright (C) 2008 Wind River Systems, Inc. # written by Ralf Baechle <ralf@linux-mips.org> # -obj-y := malta-display.o malta-dt.o malta-init.o \ - malta-int.o malta-memory.o malta-platform.o \ - malta-reset.o malta-setup.o malta-time.o +obj-y += malta-display.o +obj-y += malta-dt.o +obj-y += malta-dtshim.o +obj-y += malta-init.o +obj-y += malta-int.o +obj-y += malta-memory.o +obj-y += malta-platform.o +obj-y += malta-reset.o +obj-y += malta-setup.o +obj-y += malta-time.o obj-$(CONFIG_MIPS_CMP) += malta-amon.o obj-$(CONFIG_MIPS_MALTA_PM) += malta-pm.o + +CFLAGS_malta-dtshim.o = -I$(src)/../../../scripts/dtc/libfdt diff --git a/arch/mips/mti-malta/malta-dtshim.c b/arch/mips/mti-malta/malta-dtshim.c new file mode 100644 index 000000000000..f7133efc5843 --- /dev/null +++ b/arch/mips/mti-malta/malta-dtshim.c @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2015 Imagination Technologies + * Author: Paul Burton <paul.burton@imgtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/bug.h> +#include <linux/kernel.h> +#include <linux/libfdt.h> +#include <linux/of_fdt.h> +#include <linux/sizes.h> +#include <asm/bootinfo.h> +#include <asm/fw/fw.h> +#include <asm/page.h> + +static unsigned char fdt_buf[16 << 10] __initdata; + +/* determined physical memory size, not overridden by command line args */ +extern unsigned long physical_memsize; + +#define MAX_MEM_ARRAY_ENTRIES 1 + +static unsigned __init gen_fdt_mem_array(__be32 *mem_array, unsigned long size) +{ + unsigned long size_preio; + unsigned entries; + + entries = 1; + mem_array[0] = cpu_to_be32(PHYS_OFFSET); + if (config_enabled(CONFIG_EVA)) { + /* + * The current Malta EVA configuration is "special" in that it + * always makes use of addresses in the upper half of the 32 bit + * physical address map, which gives it a contiguous region of + * DDR but limits it to 2GB. + */ + mem_array[1] = cpu_to_be32(size); + } else { + size_preio = min_t(unsigned long, size, SZ_256M); + mem_array[1] = cpu_to_be32(size_preio); + } + + BUG_ON(entries > MAX_MEM_ARRAY_ENTRIES); + return entries; +} + +static void __init append_memory(void *fdt, int root_off) +{ + __be32 mem_array[2 * MAX_MEM_ARRAY_ENTRIES]; + unsigned long memsize; + unsigned mem_entries; + int i, err, mem_off; + char *var, param_name[10], *var_names[] = { + "ememsize", "memsize", + }; + + /* if a memory node already exists, leave it alone */ + mem_off = fdt_path_offset(fdt, "/memory"); + if (mem_off >= 0) + return; + + /* find memory size from the bootloader environment */ + for (i = 0; i < ARRAY_SIZE(var_names); i++) { + var = fw_getenv(var_names[i]); + if (!var) + continue; + + err = kstrtoul(var, 0, &physical_memsize); + if (!err) + break; + + pr_warn("Failed to read the '%s' env variable '%s'\n", + var_names[i], var); + } + + if (!physical_memsize) { + pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n"); + physical_memsize = 32 << 20; + } + + if (config_enabled(CONFIG_CPU_BIG_ENDIAN)) { + /* + * SOC-it swaps, or perhaps doesn't swap, when DMA'ing + * the last word of physical memory. + */ + physical_memsize -= PAGE_SIZE; + } + + /* default to using all available RAM */ + memsize = physical_memsize; + + /* allow the user to override the usable memory */ + for (i = 0; i < ARRAY_SIZE(var_names); i++) { + snprintf(param_name, sizeof(param_name), "%s=", var_names[i]); + var = strstr(arcs_cmdline, param_name); + if (!var) + continue; + + memsize = memparse(var + strlen(param_name), NULL); + } + + /* if the user says there's more RAM than we thought, believe them */ + physical_memsize = max_t(unsigned long, physical_memsize, memsize); + + /* append memory to the DT */ + mem_off = fdt_add_subnode(fdt, root_off, "memory"); + if (mem_off < 0) + panic("Unable to add memory node to DT: %d", mem_off); + + err = fdt_setprop_string(fdt, mem_off, "device_type", "memory"); + if (err) + panic("Unable to set memory node device_type: %d", err); + + mem_entries = gen_fdt_mem_array(mem_array, physical_memsize); + err = fdt_setprop(fdt, mem_off, "reg", mem_array, + mem_entries * 2 * sizeof(mem_array[0])); + if (err) + panic("Unable to set memory regs property: %d", err); + + mem_entries = gen_fdt_mem_array(mem_array, memsize); + err = fdt_setprop(fdt, mem_off, "linux,usable-memory", mem_array, + mem_entries * 2 * sizeof(mem_array[0])); + if (err) + panic("Unable to set linux,usable-memory property: %d", err); +} + +void __init *malta_dt_shim(void *fdt) +{ + int root_off, len, err; + const char *compat; + + if (fdt_check_header(fdt)) + panic("Corrupt DT"); + + err = fdt_open_into(fdt, fdt_buf, sizeof(fdt_buf)); + if (err) + panic("Unable to open FDT: %d", err); + + root_off = fdt_path_offset(fdt_buf, "/"); + if (root_off < 0) + panic("No / node in DT"); + + compat = fdt_getprop(fdt_buf, root_off, "compatible", &len); + if (!compat) + panic("No root compatible property in DT: %d", len); + + /* if this isn't Malta, leave the DT alone */ + if (strncmp(compat, "mti,malta", len)) + return fdt; + + append_memory(fdt_buf, root_off); + + err = fdt_pack(fdt_buf); + if (err) + panic("Unable to pack FDT: %d\n", err); + + return fdt_buf; +} diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c index 53c24784a2f7..571148c5fd0b 100644 --- a/arch/mips/mti-malta/malta-init.c +++ b/arch/mips/mti-malta/malta-init.c @@ -302,6 +302,7 @@ mips_pci_controller: return; if (!register_vsmp_smp_ops()) return; + register_up_smp_ops(); } void platform_early_l2_init(void) diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c index dadeb8379182..d5f8dae6a797 100644 --- a/arch/mips/mti-malta/malta-memory.c +++ b/arch/mips/mti-malta/malta-memory.c @@ -21,147 +21,20 @@ #include <asm/sections.h> #include <asm/fw/fw.h> -static fw_memblock_t mdesc[FW_MAX_MEMBLOCKS]; - /* determined physical memory size, not overridden by command line args */ unsigned long physical_memsize = 0L; -fw_memblock_t * __init fw_getmdesc(int eva) -{ - char *memsize_str, *ememsize_str = NULL, *ptr; - unsigned long memsize = 0, ememsize = 0; - static char cmdline[COMMAND_LINE_SIZE] __initdata; - int tmp; - - /* otherwise look in the environment */ - - memsize_str = fw_getenv("memsize"); - if (memsize_str) { - tmp = kstrtoul(memsize_str, 0, &memsize); - if (tmp) - pr_warn("Failed to read the 'memsize' env variable.\n"); - } - if (eva) { - /* Look for ememsize for EVA */ - ememsize_str = fw_getenv("ememsize"); - if (ememsize_str) { - tmp = kstrtoul(ememsize_str, 0, &ememsize); - if (tmp) - pr_warn("Failed to read the 'ememsize' env variable.\n"); - } - } - if (!memsize && !ememsize) { - pr_warn("memsize not set in YAMON, set to default (32Mb)\n"); - physical_memsize = 0x02000000; - } else { - if (memsize > (256 << 20)) { /* memsize should be capped to 256M */ - pr_warn("Unsupported memsize value (0x%lx) detected! " - "Using 0x10000000 (256M) instead\n", - memsize); - memsize = 256 << 20; - } - /* If ememsize is set, then set physical_memsize to that */ - physical_memsize = ememsize ? : memsize; - } - -#ifdef CONFIG_CPU_BIG_ENDIAN - /* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last - word of physical memory */ - physical_memsize -= PAGE_SIZE; -#endif - - /* Check the command line for a memsize directive that overrides - the physical/default amount */ - strcpy(cmdline, arcs_cmdline); - ptr = strstr(cmdline, "memsize="); - if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' ')) - ptr = strstr(ptr, " memsize="); - /* And now look for ememsize */ - if (eva) { - ptr = strstr(cmdline, "ememsize="); - if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' ')) - ptr = strstr(ptr, " ememsize="); - } - - if (ptr) - memsize = memparse(ptr + 8 + (eva ? 1 : 0), &ptr); - else - memsize = physical_memsize; - - /* Last 64K for HIGHMEM arithmetics */ - if (memsize > 0x7fff0000) - memsize = 0x7fff0000; - - memset(mdesc, 0, sizeof(mdesc)); - - mdesc[0].type = fw_dontuse; - mdesc[0].base = PHYS_OFFSET; - mdesc[0].size = 0x00001000; - - mdesc[1].type = fw_code; - mdesc[1].base = mdesc[0].base + 0x00001000UL; - mdesc[1].size = 0x000ef000; - - /* - * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the - * south bridge and PCI access always forwarded to the ISA Bus and - * BIOSCS# is always generated. - * This mean that this area can't be used as DMA memory for PCI - * devices. - */ - mdesc[2].type = fw_dontuse; - mdesc[2].base = mdesc[0].base + 0x000f0000UL; - mdesc[2].size = 0x00010000; - - mdesc[3].type = fw_dontuse; - mdesc[3].base = mdesc[0].base + 0x00100000UL; - mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) - - 0x00100000UL; - - mdesc[4].type = fw_free; - mdesc[4].base = mdesc[0].base + CPHYSADDR(PFN_ALIGN(&_end)); - mdesc[4].size = memsize - CPHYSADDR(mdesc[4].base); - - return &mdesc[0]; -} - static void free_init_pages_eva_malta(void *begin, void *end) { free_init_pages("unused kernel", __pa_symbol((unsigned long *)begin), __pa_symbol((unsigned long *)end)); } -static int __init fw_memtype_classify(unsigned int type) -{ - switch (type) { - case fw_free: - return BOOT_MEM_RAM; - case fw_code: - return BOOT_MEM_ROM_DATA; - default: - return BOOT_MEM_RESERVED; - } -} - void __init fw_meminit(void) { - fw_memblock_t *p; - - p = fw_getmdesc(config_enabled(CONFIG_EVA)); - free_init_pages_eva = (config_enabled(CONFIG_EVA) ? - free_init_pages_eva_malta : NULL); + bool eva = config_enabled(CONFIG_EVA); - while (p->size) { - long type; - unsigned long base, size; - - type = fw_memtype_classify(p->type); - base = p->base; - size = p->size; - - add_memory_region(base, size, type); - p++; - } + free_init_pages_eva = eva ? free_init_pages_eva_malta : NULL; } void __init prom_free_prom_memory(void) diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c index 9d1e7f5ec36c..4740c82fb97a 100644 --- a/arch/mips/mti-malta/malta-setup.c +++ b/arch/mips/mti-malta/malta-setup.c @@ -27,6 +27,7 @@ #include <linux/time.h> #include <asm/fw/fw.h> +#include <asm/mach-malta/malta-dtshim.h> #include <asm/mips-cm.h> #include <asm/mips-boards/generic.h> #include <asm/mips-boards/malta.h> @@ -250,8 +251,10 @@ static void __init bonito_quirks_setup(void) void __init plat_mem_setup(void) { unsigned int i; + void *fdt = __dtb_start; - __dt_setup_arch(__dtb_start); + fdt = malta_dt_shim(fdt); + __dt_setup_arch(fdt); if (config_enabled(CONFIG_EVA)) /* EVA has already been configured in mach-malta/kernel-init.h */ diff --git a/arch/mips/netlogic/xlp/dt.c b/arch/mips/netlogic/xlp/dt.c index a625bdb6d6aa..856a6e6d296e 100644 --- a/arch/mips/netlogic/xlp/dt.c +++ b/arch/mips/netlogic/xlp/dt.c @@ -87,7 +87,6 @@ void __init *xlp_dt_init(void *fdtp) void __init xlp_early_init_devtree(void) { __dt_setup_arch(xlp_fdt_blob); - strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); } void __init device_tree_init(void) diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c index ed6732f9aa87..53a42b07008b 100644 --- a/arch/mips/pci/pci-rt3883.c +++ b/arch/mips/pci/pci-rt3883.c @@ -432,8 +432,7 @@ static int rt3883_pci_probe(struct platform_device *pdev) /* find the interrupt controller child node */ for_each_child_of_node(np, child) { - if (of_get_property(child, "interrupt-controller", NULL) && - of_node_get(child)) { + if (of_get_property(child, "interrupt-controller", NULL)) { rpc->intc_of_node = child; break; } @@ -449,8 +448,7 @@ static int rt3883_pci_probe(struct platform_device *pdev) /* find the PCI host bridge child node */ for_each_child_of_node(np, child) { if (child->type && - of_node_cmp(child->type, "pci") == 0 && - of_node_get(child)) { + of_node_cmp(child->type, "pci") == 0) { rpc->pci_controller.of_node = child; break; } diff --git a/arch/mips/pistachio/init.c b/arch/mips/pistachio/init.c index 8bd8ebb20a72..96ba2cc9ad3e 100644 --- a/arch/mips/pistachio/init.c +++ b/arch/mips/pistachio/init.c @@ -58,7 +58,6 @@ void __init plat_mem_setup(void) panic("Device-tree not present"); __dt_setup_arch((void *)fw_arg1); - strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); plat_setup_iocoherency(); } diff --git a/arch/mips/ralink/cevt-rt3352.c b/arch/mips/ralink/cevt-rt3352.c index a8e70a9f274b..e46f91f971c5 100644 --- a/arch/mips/ralink/cevt-rt3352.c +++ b/arch/mips/ralink/cevt-rt3352.c @@ -48,7 +48,7 @@ static int systick_next_event(unsigned long delta, sdev = container_of(evt, struct systick_device, dev); count = ioread32(sdev->membase + SYSTICK_COUNT); count = (count + delta) % SYSTICK_FREQ; - iowrite32(count + delta, sdev->membase + SYSTICK_COMPARE); + iowrite32(count, sdev->membase + SYSTICK_COMPARE); return 0; } diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c index 255d695ec8c6..3c59ffe5f5f5 100644 --- a/arch/mips/ralink/early_printk.c +++ b/arch/mips/ralink/early_printk.c @@ -25,11 +25,13 @@ #define MT7628_CHIP_NAME1 0x20203832 #define UART_REG_TX 0x04 +#define UART_REG_LCR 0x0c #define UART_REG_LSR 0x14 #define UART_REG_LSR_RT2880 0x1c static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE); static __iomem void *chipid_membase = (__iomem void *) KSEG1ADDR(CHIPID_BASE); +static int init_complete; static inline void uart_w32(u32 val, unsigned reg) { @@ -47,8 +49,32 @@ static inline int soc_is_mt7628(void) (__raw_readl(chipid_membase) == MT7628_CHIP_NAME1); } +static void find_uart_base(void) +{ + int i; + + if (!soc_is_mt7628()) + return; + + for (i = 0; i < 3; i++) { + u32 reg = uart_r32(UART_REG_LCR + (0x100 * i)); + + if (!reg) + continue; + + uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE + + (0x100 * i)); + break; + } +} + void prom_putchar(unsigned char ch) { + if (!init_complete) { + find_uart_base(); + init_complete = 1; + } + if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) { uart_w32(ch, UART_TX); while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0) diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c index 2ea5ff6dc22e..dfb04fcedb04 100644 --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c @@ -37,8 +37,17 @@ #define PMU1_CFG 0x8C #define DIG_SW_SEL BIT(25) -/* is this a MT7620 or a MT7628 */ -enum mt762x_soc_type mt762x_soc; +/* clock scaling */ +#define CLKCFG_FDIV_MASK 0x1f00 +#define CLKCFG_FDIV_USB_VAL 0x0300 +#define CLKCFG_FFRAC_MASK 0x001f +#define CLKCFG_FFRAC_USB_VAL 0x0003 + +/* EFUSE bits */ +#define EFUSE_MT7688 0x100000 + +/* DRAM type bit */ +#define DRAM_TYPE_MT7628_MASK 0x1 /* does the board have sdram or ddram */ static int dram_type; @@ -227,6 +236,12 @@ static struct rt2880_pmx_group mt7628an_pinmux_data[] = { { 0 } }; +static inline int is_mt76x8(void) +{ + return ralink_soc == MT762X_SOC_MT7628AN || + ralink_soc == MT762X_SOC_MT7688; +} + static __init u32 mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div) { @@ -381,7 +396,7 @@ void __init ralink_clk_init(void) #define RINT(x) ((x) / 1000000) #define RFRAC(x) (((x) / 1000) % 1000) - if (mt762x_soc == MT762X_SOC_MT7628AN) { + if (is_mt76x8()) { if (xtal_rate == MHZ(40)) cpu_rate = MHZ(580); else @@ -423,6 +438,20 @@ void __init ralink_clk_init(void) ralink_clk_add("10000b00.spi", sys_rate); ralink_clk_add("10000c00.uartlite", periph_rate); ralink_clk_add("10180000.wmac", xtal_rate); + + if (IS_ENABLED(CONFIG_USB) && is_mt76x8()) { + /* + * When the CPU goes into sleep mode, the BUS clock will be + * too low for USB to function properly. Adjust the busses + * fractional divider to fix this + */ + u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); + + val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK); + val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL; + + rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG); + } } void __init ralink_of_remap(void) @@ -499,20 +528,24 @@ void prom_soc_init(struct ralink_soc_info *soc_info) if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) { if (bga) { - mt762x_soc = MT762X_SOC_MT7620A; + ralink_soc = MT762X_SOC_MT7620A; name = "MT7620A"; soc_info->compatible = "ralink,mt7620a-soc"; } else { - mt762x_soc = MT762X_SOC_MT7620N; + ralink_soc = MT762X_SOC_MT7620N; name = "MT7620N"; soc_info->compatible = "ralink,mt7620n-soc"; -#ifdef CONFIG_PCI - panic("mt7620n is only supported for non pci kernels"); -#endif } } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) { - mt762x_soc = MT762X_SOC_MT7628AN; - name = "MT7628AN"; + u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG); + + if (efuse & EFUSE_MT7688) { + ralink_soc = MT762X_SOC_MT7688; + name = "MT7688"; + } else { + ralink_soc = MT762X_SOC_MT7628AN; + name = "MT7628AN"; + } soc_info->compatible = "ralink,mt7628an-soc"; } else { panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1); @@ -525,10 +558,14 @@ void prom_soc_init(struct ralink_soc_info *soc_info) (rev & CHIP_REV_ECO_MASK)); cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0); - dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK; + if (is_mt76x8()) + dram_type = cfg0 & DRAM_TYPE_MT7628_MASK; + else + dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & + SYSCFG0_DRAM_TYPE_MASK; soc_info->mem_base = MT7620_DRAM_BASE; - if (mt762x_soc == MT762X_SOC_MT7628AN) + if (is_mt76x8()) mt7628_dram_init(soc_info); else mt7620_dram_init(soc_info); @@ -541,7 +578,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info) pr_info("Digital PMU set to %s control\n", (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw")); - if (mt762x_soc == MT762X_SOC_MT7628AN) + if (is_mt76x8()) rt2880_pinmux_data = mt7628an_pinmux_data; else rt2880_pinmux_data = mt7620a_pinmux_data; diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c index 0d30dcd63246..f9eda5d8f82c 100644 --- a/arch/mips/ralink/of.c +++ b/arch/mips/ralink/of.c @@ -74,8 +74,6 @@ void __init plat_mem_setup(void) */ __dt_setup_arch(__dtb_start); - strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); - of_scan_flat_dt(early_init_dt_find_memory, NULL); if (memory_dtb) of_scan_flat_dt(early_init_dt_scan_memory, NULL); diff --git a/arch/mips/ralink/prom.c b/arch/mips/ralink/prom.c index 09419f67da39..39a9142f71be 100644 --- a/arch/mips/ralink/prom.c +++ b/arch/mips/ralink/prom.c @@ -15,11 +15,16 @@ #include <asm/bootinfo.h> #include <asm/addrspace.h> +#include <asm/mach-ralink/ralink_regs.h> + #include "common.h" struct ralink_soc_info soc_info; struct rt2880_pmx_group *rt2880_pinmux_data = NULL; +enum ralink_soc_type ralink_soc; +EXPORT_SYMBOL_GPL(ralink_soc); + const char *get_system_type(void) { return soc_info.sys_type; diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c index 55c7ec59df3c..ee117c4bc4a3 100644 --- a/arch/mips/ralink/reset.c +++ b/arch/mips/ralink/reset.c @@ -11,6 +11,7 @@ #include <linux/pm.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/delay.h> #include <linux/reset-controller.h> #include <asm/reboot.h> @@ -18,8 +19,10 @@ #include <asm/mach-ralink/ralink_regs.h> /* Reset Control */ -#define SYSC_REG_RESET_CTRL 0x034 -#define RSTCTL_RESET_SYSTEM BIT(0) +#define SYSC_REG_RESET_CTRL 0x034 + +#define RSTCTL_RESET_PCI BIT(26) +#define RSTCTL_RESET_SYSTEM BIT(0) static int ralink_assert_device(struct reset_controller_dev *rcdev, unsigned long id) @@ -83,6 +86,11 @@ void ralink_rst_init(void) static void ralink_restart(char *command) { + if (IS_ENABLED(CONFIG_PCI)) { + rt_sysc_m32(0, RSTCTL_RESET_PCI, SYSC_REG_RESET_CTRL); + mdelay(50); + } + local_irq_disable(); rt_sysc_w32(RSTCTL_RESET_SYSTEM, SYSC_REG_RESET_CTRL); unreachable(); @@ -98,7 +106,6 @@ static int __init mips_reboot_setup(void) { _machine_restart = ralink_restart; _machine_halt = ralink_halt; - pm_power_off = ralink_halt; return 0; } diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c index 738cec865f41..844f5cd55c8f 100644 --- a/arch/mips/ralink/rt288x.c +++ b/arch/mips/ralink/rt288x.c @@ -119,4 +119,5 @@ void prom_soc_init(struct ralink_soc_info *soc_info) soc_info->mem_size_max = RT2880_MEM_SIZE_MAX; rt2880_pinmux_data = rt2880_pinmux_data_act; + ralink_soc == RT2880_SOC; } diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c index c40776ab67db..9e4572592065 100644 --- a/arch/mips/ralink/rt305x.c +++ b/arch/mips/ralink/rt305x.c @@ -21,8 +21,6 @@ #include "common.h" -enum rt305x_soc_type rt305x_soc; - static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) }; static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) }; static struct rt2880_pmx_func uartf_func[] = { @@ -201,6 +199,7 @@ void __init ralink_clk_init(void) } ralink_clk_add("cpu", cpu_rate); + ralink_clk_add("sys", sys_rate); ralink_clk_add("10000b00.spi", sys_rate); ralink_clk_add("10000100.timer", wdt_rate); ralink_clk_add("10000120.watchdog", wdt_rate); @@ -235,24 +234,24 @@ void prom_soc_init(struct ralink_soc_info *soc_info) icache_sets = (read_c0_config1() >> 22) & 7; if (icache_sets == 1) { - rt305x_soc = RT305X_SOC_RT3050; + ralink_soc = RT305X_SOC_RT3050; name = "RT3050"; soc_info->compatible = "ralink,rt3050-soc"; } else { - rt305x_soc = RT305X_SOC_RT3052; + ralink_soc = RT305X_SOC_RT3052; name = "RT3052"; soc_info->compatible = "ralink,rt3052-soc"; } } else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) { - rt305x_soc = RT305X_SOC_RT3350; + ralink_soc = RT305X_SOC_RT3350; name = "RT3350"; soc_info->compatible = "ralink,rt3350-soc"; } else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) { - rt305x_soc = RT305X_SOC_RT3352; + ralink_soc = RT305X_SOC_RT3352; name = "RT3352"; soc_info->compatible = "ralink,rt3352-soc"; } else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) { - rt305x_soc = RT305X_SOC_RT5350; + ralink_soc = RT305X_SOC_RT5350; name = "RT5350"; soc_info->compatible = "ralink,rt5350-soc"; } else { diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c index 86a535c770d8..582995aaaf4e 100644 --- a/arch/mips/ralink/rt3883.c +++ b/arch/mips/ralink/rt3883.c @@ -153,4 +153,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info) soc_info->mem_size_max = RT3883_MEM_SIZE_MAX; rt2880_pinmux_data = rt3883_pinmux_data; + + ralink_soc == RT3883_SOC; } diff --git a/arch/mips/vdso/.gitignore b/arch/mips/vdso/.gitignore new file mode 100644 index 000000000000..5286a7d73d79 --- /dev/null +++ b/arch/mips/vdso/.gitignore @@ -0,0 +1,4 @@ +*.so* +vdso-*image.c +genvdso +vdso*.lds diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile new file mode 100644 index 000000000000..ef5f348f386a --- /dev/null +++ b/arch/mips/vdso/Makefile @@ -0,0 +1,160 @@ +# Objects to go into the VDSO. +obj-vdso-y := elf.o gettimeofday.o sigreturn.o + +# Common compiler flags between ABIs. +ccflags-vdso := \ + $(filter -I%,$(KBUILD_CFLAGS)) \ + $(filter -E%,$(KBUILD_CFLAGS)) \ + $(filter -march=%,$(KBUILD_CFLAGS)) +cflags-vdso := $(ccflags-vdso) \ + $(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \ + -O2 -g -fPIC -fno-common -fno-builtin -G 0 -DDISABLE_BRANCH_PROFILING \ + $(call cc-option, -fno-stack-protector) +aflags-vdso := $(ccflags-vdso) \ + $(filter -I%,$(KBUILD_CFLAGS)) \ + $(filter -E%,$(KBUILD_CFLAGS)) \ + -D__ASSEMBLY__ -Wa,-gdwarf-2 + +# +# For the pre-R6 code in arch/mips/vdso/vdso.h for locating +# the base address of VDSO, the linker will emit a R_MIPS_PC32 +# relocation in binutils > 2.25 but it will fail with older versions +# because that relocation is not supported for that symbol. As a result +# of which we are forced to disable the VDSO symbols when building +# with < 2.25 binutils on pre-R6 kernels. For more references on why we +# can't use other methods to get the base address of VDSO please refer to +# the comments on that file. +# +ifndef CONFIG_CPU_MIPSR6 + ifeq ($(call ld-ifversion, -gt, 22400000, y),) + $(warning MIPS VDSO requires binutils > 2.24) + obj-vdso-y := $(filter-out gettimeofday.o, $(obj-vdso-y)) + ccflags-vdso += -DDISABLE_MIPS_VDSO + endif +endif + +# VDSO linker flags. +VDSO_LDFLAGS := \ + -Wl,-Bsymbolic -Wl,--no-undefined -Wl,-soname=linux-vdso.so.1 \ + -nostdlib -shared \ + $(call cc-ldoption, -Wl$(comma)--hash-style=sysv) \ + $(call cc-ldoption, -Wl$(comma)--build-id) + +GCOV_PROFILE := n + +# +# Shared build commands. +# + +quiet_cmd_vdsold = VDSO $@ + cmd_vdsold = $(CC) $(c_flags) $(VDSO_LDFLAGS) \ + -Wl,-T $(filter %.lds,$^) $(filter %.o,$^) -o $@ + +hostprogs-y := genvdso + +quiet_cmd_genvdso = GENVDSO $@ +define cmd_genvdso + cp $< $(<:%.dbg=%) && \ + $(OBJCOPY) -S $< $(<:%.dbg=%) && \ + $(obj)/genvdso $< $(<:%.dbg=%) $@ $(VDSO_NAME) +endef + +# +# Build native VDSO. +# + +native-abi := $(filter -mabi=%,$(KBUILD_CFLAGS)) + +targets += $(obj-vdso-y) +targets += vdso.lds vdso.so.dbg vdso.so vdso-image.c + +obj-vdso := $(obj-vdso-y:%.o=$(obj)/%.o) + +$(obj-vdso): KBUILD_CFLAGS := $(cflags-vdso) $(native-abi) +$(obj-vdso): KBUILD_AFLAGS := $(aflags-vdso) $(native-abi) + +$(obj)/vdso.lds: KBUILD_CPPFLAGS := $(native-abi) + +$(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) FORCE + $(call if_changed,vdsold) + +$(obj)/vdso-image.c: $(obj)/vdso.so.dbg $(obj)/genvdso FORCE + $(call if_changed,genvdso) + +obj-y += vdso-image.o + +# +# Build O32 VDSO. +# + +# Define these outside the ifdef to ensure they are picked up by clean. +targets += $(obj-vdso-y:%.o=%-o32.o) +targets += vdso-o32.lds vdso-o32.so.dbg vdso-o32.so vdso-o32-image.c + +ifdef CONFIG_MIPS32_O32 + +obj-vdso-o32 := $(obj-vdso-y:%.o=$(obj)/%-o32.o) + +$(obj-vdso-o32): KBUILD_CFLAGS := $(cflags-vdso) -mabi=32 +$(obj-vdso-o32): KBUILD_AFLAGS := $(aflags-vdso) -mabi=32 + +$(obj)/%-o32.o: $(src)/%.S FORCE + $(call if_changed_dep,as_o_S) + +$(obj)/%-o32.o: $(src)/%.c FORCE + $(call cmd,force_checksrc) + $(call if_changed_rule,cc_o_c) + +$(obj)/vdso-o32.lds: KBUILD_CPPFLAGS := -mabi=32 +$(obj)/vdso-o32.lds: $(src)/vdso.lds.S FORCE + $(call if_changed_dep,cpp_lds_S) + +$(obj)/vdso-o32.so.dbg: $(obj)/vdso-o32.lds $(obj-vdso-o32) FORCE + $(call if_changed,vdsold) + +$(obj)/vdso-o32-image.c: VDSO_NAME := o32 +$(obj)/vdso-o32-image.c: $(obj)/vdso-o32.so.dbg $(obj)/genvdso FORCE + $(call if_changed,genvdso) + +obj-y += vdso-o32-image.o + +endif + +# +# Build N32 VDSO. +# + +targets += $(obj-vdso-y:%.o=%-n32.o) +targets += vdso-n32.lds vdso-n32.so.dbg vdso-n32.so vdso-n32-image.c + +ifdef CONFIG_MIPS32_N32 + +obj-vdso-n32 := $(obj-vdso-y:%.o=$(obj)/%-n32.o) + +$(obj-vdso-n32): KBUILD_CFLAGS := $(cflags-vdso) -mabi=n32 +$(obj-vdso-n32): KBUILD_AFLAGS := $(aflags-vdso) -mabi=n32 + +$(obj)/%-n32.o: $(src)/%.S FORCE + $(call if_changed_dep,as_o_S) + +$(obj)/%-n32.o: $(src)/%.c FORCE + $(call cmd,force_checksrc) + $(call if_changed_rule,cc_o_c) + +$(obj)/vdso-n32.lds: KBUILD_CPPFLAGS := -mabi=n32 +$(obj)/vdso-n32.lds: $(src)/vdso.lds.S FORCE + $(call if_changed_dep,cpp_lds_S) + +$(obj)/vdso-n32.so.dbg: $(obj)/vdso-n32.lds $(obj-vdso-n32) FORCE + $(call if_changed,vdsold) + +$(obj)/vdso-n32-image.c: VDSO_NAME := n32 +$(obj)/vdso-n32-image.c: $(obj)/vdso-n32.so.dbg $(obj)/genvdso FORCE + $(call if_changed,genvdso) + +obj-y += vdso-n32-image.o + +endif + +# FIXME: Need install rule for debug. +# Needs to deal with dependency for generation of dbg by cmd_genvdso... diff --git a/arch/mips/vdso/elf.S b/arch/mips/vdso/elf.S new file mode 100644 index 000000000000..be37bbb1f061 --- /dev/null +++ b/arch/mips/vdso/elf.S @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2015 Imagination Technologies + * Author: Alex Smith <alex.smith@imgtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include "vdso.h" + +#include <linux/elfnote.h> +#include <linux/version.h> + +ELFNOTE_START(Linux, 0, "a") + .long LINUX_VERSION_CODE +ELFNOTE_END + +/* + * The .MIPS.abiflags section must be defined with the FP ABI flags set + * to 'any' to be able to link with both old and new libraries. + * Newer toolchains are capable of automatically generating this, but we want + * to work with older toolchains as well. Therefore, we define the contents of + * this section here (under different names), and then genvdso will patch + * it to have the correct name and type. + * + * We base the .MIPS.abiflags section on preprocessor definitions rather than + * CONFIG_* because we need to match the particular ABI we are building the + * VDSO for. + * + * See https://dmz-portal.mips.com/wiki/MIPS_O32_ABI_-_FR0_and_FR1_Interlinking + * for the .MIPS.abiflags section description. + */ + + .section .mips_abiflags, "a" + .align 3 +__mips_abiflags: + .hword 0 /* version */ + .byte __mips /* isa_level */ + + /* isa_rev */ +#ifdef __mips_isa_rev + .byte __mips_isa_rev +#else + .byte 0 +#endif + + /* gpr_size */ +#ifdef __mips64 + .byte 2 /* AFL_REG_64 */ +#else + .byte 1 /* AFL_REG_32 */ +#endif + + /* cpr1_size */ +#if (defined(__mips_isa_rev) && __mips_isa_rev >= 6) || defined(__mips64) + .byte 2 /* AFL_REG_64 */ +#else + .byte 1 /* AFL_REG_32 */ +#endif + + .byte 0 /* cpr2_size (AFL_REG_NONE) */ + .byte 0 /* fp_abi (Val_GNU_MIPS_ABI_FP_ANY) */ + .word 0 /* isa_ext */ + .word 0 /* ases */ + .word 0 /* flags1 */ + .word 0 /* flags2 */ diff --git a/arch/mips/vdso/genvdso.c b/arch/mips/vdso/genvdso.c new file mode 100644 index 000000000000..530a36f465ce --- /dev/null +++ b/arch/mips/vdso/genvdso.c @@ -0,0 +1,293 @@ +/* + * Copyright (C) 2015 Imagination Technologies + * Author: Alex Smith <alex.smith@imgtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/* + * This tool is used to generate the real VDSO images from the raw image. It + * first patches up the MIPS ABI flags and GNU attributes sections defined in + * elf.S to have the correct name and type. It then generates a C source file + * to be compiled into the kernel containing the VDSO image data and a + * mips_vdso_image struct for it, including symbol offsets extracted from the + * image. + * + * We need to be passed both a stripped and unstripped VDSO image. The stripped + * image is compiled into the kernel, but we must also patch up the unstripped + * image's ABI flags sections so that it can be installed and used for + * debugging. + */ + +#include <sys/mman.h> +#include <sys/stat.h> +#include <sys/types.h> + +#include <byteswap.h> +#include <elf.h> +#include <errno.h> +#include <fcntl.h> +#include <inttypes.h> +#include <stdarg.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> + +/* Define these in case the system elf.h is not new enough to have them. */ +#ifndef SHT_GNU_ATTRIBUTES +# define SHT_GNU_ATTRIBUTES 0x6ffffff5 +#endif +#ifndef SHT_MIPS_ABIFLAGS +# define SHT_MIPS_ABIFLAGS 0x7000002a +#endif + +enum { + ABI_O32 = (1 << 0), + ABI_N32 = (1 << 1), + ABI_N64 = (1 << 2), + + ABI_ALL = ABI_O32 | ABI_N32 | ABI_N64, +}; + +/* Symbols the kernel requires offsets for. */ +static struct { + const char *name; + const char *offset_name; + unsigned int abis; +} vdso_symbols[] = { + { "__vdso_sigreturn", "off_sigreturn", ABI_O32 }, + { "__vdso_rt_sigreturn", "off_rt_sigreturn", ABI_ALL }, + {} +}; + +static const char *program_name; +static const char *vdso_name; +static unsigned char elf_class; +static unsigned int elf_abi; +static bool need_swap; +static FILE *out_file; + +#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ +# define HOST_ORDER ELFDATA2LSB +#elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ +# define HOST_ORDER ELFDATA2MSB +#endif + +#define BUILD_SWAP(bits) \ + static uint##bits##_t swap_uint##bits(uint##bits##_t val) \ + { \ + return need_swap ? bswap_##bits(val) : val; \ + } + +BUILD_SWAP(16) +BUILD_SWAP(32) +BUILD_SWAP(64) + +#define __FUNC(name, bits) name##bits +#define _FUNC(name, bits) __FUNC(name, bits) +#define FUNC(name) _FUNC(name, ELF_BITS) + +#define __ELF(x, bits) Elf##bits##_##x +#define _ELF(x, bits) __ELF(x, bits) +#define ELF(x) _ELF(x, ELF_BITS) + +/* + * Include genvdso.h twice with ELF_BITS defined differently to get functions + * for both ELF32 and ELF64. + */ + +#define ELF_BITS 64 +#include "genvdso.h" +#undef ELF_BITS + +#define ELF_BITS 32 +#include "genvdso.h" +#undef ELF_BITS + +static void *map_vdso(const char *path, size_t *_size) +{ + int fd; + struct stat stat; + void *addr; + const Elf32_Ehdr *ehdr; + + fd = open(path, O_RDWR); + if (fd < 0) { + fprintf(stderr, "%s: Failed to open '%s': %s\n", program_name, + path, strerror(errno)); + return NULL; + } + + if (fstat(fd, &stat) != 0) { + fprintf(stderr, "%s: Failed to stat '%s': %s\n", program_name, + path, strerror(errno)); + return NULL; + } + + addr = mmap(NULL, stat.st_size, PROT_READ | PROT_WRITE, MAP_SHARED, fd, + 0); + if (addr == MAP_FAILED) { + fprintf(stderr, "%s: Failed to map '%s': %s\n", program_name, + path, strerror(errno)); + return NULL; + } + + /* ELF32/64 header formats are the same for the bits we're checking. */ + ehdr = addr; + + if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG) != 0) { + fprintf(stderr, "%s: '%s' is not an ELF file\n", program_name, + path); + return NULL; + } + + elf_class = ehdr->e_ident[EI_CLASS]; + switch (elf_class) { + case ELFCLASS32: + case ELFCLASS64: + break; + default: + fprintf(stderr, "%s: '%s' has invalid ELF class\n", + program_name, path); + return NULL; + } + + switch (ehdr->e_ident[EI_DATA]) { + case ELFDATA2LSB: + case ELFDATA2MSB: + need_swap = ehdr->e_ident[EI_DATA] != HOST_ORDER; + break; + default: + fprintf(stderr, "%s: '%s' has invalid ELF data order\n", + program_name, path); + return NULL; + } + + if (swap_uint16(ehdr->e_machine) != EM_MIPS) { + fprintf(stderr, + "%s: '%s' has invalid ELF machine (expected EM_MIPS)\n", + program_name, path); + return NULL; + } else if (swap_uint16(ehdr->e_type) != ET_DYN) { + fprintf(stderr, + "%s: '%s' has invalid ELF type (expected ET_DYN)\n", + program_name, path); + return NULL; + } + + *_size = stat.st_size; + return addr; +} + +static bool patch_vdso(const char *path, void *vdso) +{ + if (elf_class == ELFCLASS64) + return patch_vdso64(path, vdso); + else + return patch_vdso32(path, vdso); +} + +static bool get_symbols(const char *path, void *vdso) +{ + if (elf_class == ELFCLASS64) + return get_symbols64(path, vdso); + else + return get_symbols32(path, vdso); +} + +int main(int argc, char **argv) +{ + const char *dbg_vdso_path, *vdso_path, *out_path; + void *dbg_vdso, *vdso; + size_t dbg_vdso_size, vdso_size, i; + + program_name = argv[0]; + + if (argc < 4 || argc > 5) { + fprintf(stderr, + "Usage: %s <debug VDSO> <stripped VDSO> <output file> [<name>]\n", + program_name); + return EXIT_FAILURE; + } + + dbg_vdso_path = argv[1]; + vdso_path = argv[2]; + out_path = argv[3]; + vdso_name = (argc > 4) ? argv[4] : ""; + + dbg_vdso = map_vdso(dbg_vdso_path, &dbg_vdso_size); + if (!dbg_vdso) + return EXIT_FAILURE; + + vdso = map_vdso(vdso_path, &vdso_size); + if (!vdso) + return EXIT_FAILURE; + + /* Patch both the VDSOs' ABI flags sections. */ + if (!patch_vdso(dbg_vdso_path, dbg_vdso)) + return EXIT_FAILURE; + if (!patch_vdso(vdso_path, vdso)) + return EXIT_FAILURE; + + if (msync(dbg_vdso, dbg_vdso_size, MS_SYNC) != 0) { + fprintf(stderr, "%s: Failed to sync '%s': %s\n", program_name, + dbg_vdso_path, strerror(errno)); + return EXIT_FAILURE; + } else if (msync(vdso, vdso_size, MS_SYNC) != 0) { + fprintf(stderr, "%s: Failed to sync '%s': %s\n", program_name, + vdso_path, strerror(errno)); + return EXIT_FAILURE; + } + + out_file = fopen(out_path, "w"); + if (!out_file) { + fprintf(stderr, "%s: Failed to open '%s': %s\n", program_name, + out_path, strerror(errno)); + return EXIT_FAILURE; + } + + fprintf(out_file, "/* Automatically generated - do not edit */\n"); + fprintf(out_file, "#include <linux/linkage.h>\n"); + fprintf(out_file, "#include <linux/mm.h>\n"); + fprintf(out_file, "#include <asm/vdso.h>\n"); + + /* Write out the stripped VDSO data. */ + fprintf(out_file, + "static unsigned char vdso_data[PAGE_ALIGN(%zu)] __page_aligned_data = {\n\t", + vdso_size); + for (i = 0; i < vdso_size; i++) { + if (!(i % 10)) + fprintf(out_file, "\n\t"); + fprintf(out_file, "0x%02x, ", ((unsigned char *)vdso)[i]); + } + fprintf(out_file, "\n};\n"); + + /* Preallocate a page array. */ + fprintf(out_file, + "static struct page *vdso_pages[PAGE_ALIGN(%zu) / PAGE_SIZE];\n", + vdso_size); + + fprintf(out_file, "struct mips_vdso_image vdso_image%s%s = {\n", + (vdso_name[0]) ? "_" : "", vdso_name); + fprintf(out_file, "\t.data = vdso_data,\n"); + fprintf(out_file, "\t.size = PAGE_ALIGN(%zu),\n", vdso_size); + fprintf(out_file, "\t.mapping = {\n"); + fprintf(out_file, "\t\t.name = \"[vdso]\",\n"); + fprintf(out_file, "\t\t.pages = vdso_pages,\n"); + fprintf(out_file, "\t},\n"); + + /* Calculate and write symbol offsets to <output file> */ + if (!get_symbols(dbg_vdso_path, dbg_vdso)) { + unlink(out_path); + return EXIT_FAILURE; + } + + fprintf(out_file, "};\n"); + + return EXIT_SUCCESS; +} diff --git a/arch/mips/vdso/genvdso.h b/arch/mips/vdso/genvdso.h new file mode 100644 index 000000000000..94334727059a --- /dev/null +++ b/arch/mips/vdso/genvdso.h @@ -0,0 +1,187 @@ +/* + * Copyright (C) 2015 Imagination Technologies + * Author: Alex Smith <alex.smith@imgtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +static inline bool FUNC(patch_vdso)(const char *path, void *vdso) +{ + const ELF(Ehdr) *ehdr = vdso; + void *shdrs; + ELF(Shdr) *shdr; + char *shstrtab, *name; + uint16_t sh_count, sh_entsize, i; + unsigned int local_gotno, symtabno, gotsym; + ELF(Dyn) *dyn = NULL; + + shdrs = vdso + FUNC(swap_uint)(ehdr->e_shoff); + sh_count = swap_uint16(ehdr->e_shnum); + sh_entsize = swap_uint16(ehdr->e_shentsize); + + shdr = shdrs + (sh_entsize * swap_uint16(ehdr->e_shstrndx)); + shstrtab = vdso + FUNC(swap_uint)(shdr->sh_offset); + + for (i = 0; i < sh_count; i++) { + shdr = shdrs + (i * sh_entsize); + name = shstrtab + swap_uint32(shdr->sh_name); + + /* + * Ensure there are no relocation sections - ld.so does not + * relocate the VDSO so if there are relocations things will + * break. + */ + switch (swap_uint32(shdr->sh_type)) { + case SHT_REL: + case SHT_RELA: + fprintf(stderr, + "%s: '%s' contains relocation sections\n", + program_name, path); + return false; + case SHT_DYNAMIC: + dyn = vdso + FUNC(swap_uint)(shdr->sh_offset); + break; + } + + /* Check for existing sections. */ + if (strcmp(name, ".MIPS.abiflags") == 0) { + fprintf(stderr, + "%s: '%s' already contains a '.MIPS.abiflags' section\n", + program_name, path); + return false; + } + + if (strcmp(name, ".mips_abiflags") == 0) { + strcpy(name, ".MIPS.abiflags"); + shdr->sh_type = swap_uint32(SHT_MIPS_ABIFLAGS); + shdr->sh_entsize = shdr->sh_size; + } + } + + /* + * Ensure the GOT has no entries other than the standard 2, for the same + * reason we check that there's no relocation sections above. + * The standard two entries are: + * - Lazy resolver + * - Module pointer + */ + if (dyn) { + local_gotno = symtabno = gotsym = 0; + + while (FUNC(swap_uint)(dyn->d_tag) != DT_NULL) { + switch (FUNC(swap_uint)(dyn->d_tag)) { + /* + * This member holds the number of local GOT entries. + */ + case DT_MIPS_LOCAL_GOTNO: + local_gotno = FUNC(swap_uint)(dyn->d_un.d_val); + break; + /* + * This member holds the number of entries in the + * .dynsym section. + */ + case DT_MIPS_SYMTABNO: + symtabno = FUNC(swap_uint)(dyn->d_un.d_val); + break; + /* + * This member holds the index of the first dynamic + * symbol table entry that corresponds to an entry in + * the GOT. + */ + case DT_MIPS_GOTSYM: + gotsym = FUNC(swap_uint)(dyn->d_un.d_val); + break; + } + + dyn++; + } + + if (local_gotno > 2 || symtabno - gotsym) { + fprintf(stderr, + "%s: '%s' contains unexpected GOT entries\n", + program_name, path); + return false; + } + } + + return true; +} + +static inline bool FUNC(get_symbols)(const char *path, void *vdso) +{ + const ELF(Ehdr) *ehdr = vdso; + void *shdrs, *symtab; + ELF(Shdr) *shdr; + const ELF(Sym) *sym; + char *strtab, *name; + uint16_t sh_count, sh_entsize, st_count, st_entsize, i, j; + uint64_t offset; + uint32_t flags; + + shdrs = vdso + FUNC(swap_uint)(ehdr->e_shoff); + sh_count = swap_uint16(ehdr->e_shnum); + sh_entsize = swap_uint16(ehdr->e_shentsize); + + for (i = 0; i < sh_count; i++) { + shdr = shdrs + (i * sh_entsize); + + if (swap_uint32(shdr->sh_type) == SHT_SYMTAB) + break; + } + + if (i == sh_count) { + fprintf(stderr, "%s: '%s' has no symbol table\n", program_name, + path); + return false; + } + + /* Get flags */ + flags = swap_uint32(ehdr->e_flags); + if (elf_class == ELFCLASS64) + elf_abi = ABI_N64; + else if (flags & EF_MIPS_ABI2) + elf_abi = ABI_N32; + else + elf_abi = ABI_O32; + + /* Get symbol table. */ + symtab = vdso + FUNC(swap_uint)(shdr->sh_offset); + st_entsize = FUNC(swap_uint)(shdr->sh_entsize); + st_count = FUNC(swap_uint)(shdr->sh_size) / st_entsize; + + /* Get string table. */ + shdr = shdrs + (swap_uint32(shdr->sh_link) * sh_entsize); + strtab = vdso + FUNC(swap_uint)(shdr->sh_offset); + + /* Write offsets for symbols needed by the kernel. */ + for (i = 0; vdso_symbols[i].name; i++) { + if (!(vdso_symbols[i].abis & elf_abi)) + continue; + + for (j = 0; j < st_count; j++) { + sym = symtab + (j * st_entsize); + name = strtab + swap_uint32(sym->st_name); + + if (!strcmp(name, vdso_symbols[i].name)) { + offset = FUNC(swap_uint)(sym->st_value); + + fprintf(out_file, + "\t.%s = 0x%" PRIx64 ",\n", + vdso_symbols[i].offset_name, offset); + break; + } + } + + if (j == st_count) { + fprintf(stderr, + "%s: '%s' is missing required symbol '%s'\n", + program_name, path, vdso_symbols[i].name); + return false; + } + } + + return true; +} diff --git a/arch/mips/vdso/gettimeofday.c b/arch/mips/vdso/gettimeofday.c new file mode 100644 index 000000000000..ce89c9e294f9 --- /dev/null +++ b/arch/mips/vdso/gettimeofday.c @@ -0,0 +1,232 @@ +/* + * Copyright (C) 2015 Imagination Technologies + * Author: Alex Smith <alex.smith@imgtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include "vdso.h" + +#include <linux/compiler.h> +#include <linux/irqchip/mips-gic.h> +#include <linux/time.h> + +#include <asm/clocksource.h> +#include <asm/io.h> +#include <asm/mips-cm.h> +#include <asm/unistd.h> +#include <asm/vdso.h> + +static __always_inline int do_realtime_coarse(struct timespec *ts, + const union mips_vdso_data *data) +{ + u32 start_seq; + + do { + start_seq = vdso_data_read_begin(data); + + ts->tv_sec = data->xtime_sec; + ts->tv_nsec = data->xtime_nsec >> data->cs_shift; + } while (vdso_data_read_retry(data, start_seq)); + + return 0; +} + +static __always_inline int do_monotonic_coarse(struct timespec *ts, + const union mips_vdso_data *data) +{ + u32 start_seq; + u32 to_mono_sec; + u32 to_mono_nsec; + + do { + start_seq = vdso_data_read_begin(data); + + ts->tv_sec = data->xtime_sec; + ts->tv_nsec = data->xtime_nsec >> data->cs_shift; + + to_mono_sec = data->wall_to_mono_sec; + to_mono_nsec = data->wall_to_mono_nsec; + } while (vdso_data_read_retry(data, start_seq)); + + ts->tv_sec += to_mono_sec; + timespec_add_ns(ts, to_mono_nsec); + + return 0; +} + +#ifdef CONFIG_CSRC_R4K + +static __always_inline u64 read_r4k_count(void) +{ + unsigned int count; + + __asm__ __volatile__( + " .set push\n" + " .set mips32r2\n" + " rdhwr %0, $2\n" + " .set pop\n" + : "=r" (count)); + + return count; +} + +#endif + +#ifdef CONFIG_CLKSRC_MIPS_GIC + +static __always_inline u64 read_gic_count(const union mips_vdso_data *data) +{ + void __iomem *gic = get_gic(data); + u32 hi, hi2, lo; + + do { + hi = __raw_readl(gic + GIC_UMV_SH_COUNTER_63_32_OFS); + lo = __raw_readl(gic + GIC_UMV_SH_COUNTER_31_00_OFS); + hi2 = __raw_readl(gic + GIC_UMV_SH_COUNTER_63_32_OFS); + } while (hi2 != hi); + + return (((u64)hi) << 32) + lo; +} + +#endif + +static __always_inline u64 get_ns(const union mips_vdso_data *data) +{ + u64 cycle_now, delta, nsec; + + switch (data->clock_mode) { +#ifdef CONFIG_CSRC_R4K + case VDSO_CLOCK_R4K: + cycle_now = read_r4k_count(); + break; +#endif +#ifdef CONFIG_CLKSRC_MIPS_GIC + case VDSO_CLOCK_GIC: + cycle_now = read_gic_count(data); + break; +#endif + default: + return 0; + } + + delta = (cycle_now - data->cs_cycle_last) & data->cs_mask; + + nsec = (delta * data->cs_mult) + data->xtime_nsec; + nsec >>= data->cs_shift; + + return nsec; +} + +static __always_inline int do_realtime(struct timespec *ts, + const union mips_vdso_data *data) +{ + u32 start_seq; + u64 ns; + + do { + start_seq = vdso_data_read_begin(data); + + if (data->clock_mode == VDSO_CLOCK_NONE) + return -ENOSYS; + + ts->tv_sec = data->xtime_sec; + ns = get_ns(data); + } while (vdso_data_read_retry(data, start_seq)); + + ts->tv_nsec = 0; + timespec_add_ns(ts, ns); + + return 0; +} + +static __always_inline int do_monotonic(struct timespec *ts, + const union mips_vdso_data *data) +{ + u32 start_seq; + u64 ns; + u32 to_mono_sec; + u32 to_mono_nsec; + + do { + start_seq = vdso_data_read_begin(data); + + if (data->clock_mode == VDSO_CLOCK_NONE) + return -ENOSYS; + + ts->tv_sec = data->xtime_sec; + ns = get_ns(data); + + to_mono_sec = data->wall_to_mono_sec; + to_mono_nsec = data->wall_to_mono_nsec; + } while (vdso_data_read_retry(data, start_seq)); + + ts->tv_sec += to_mono_sec; + ts->tv_nsec = 0; + timespec_add_ns(ts, ns + to_mono_nsec); + + return 0; +} + +#ifdef CONFIG_MIPS_CLOCK_VSYSCALL + +/* + * This is behind the ifdef so that we don't provide the symbol when there's no + * possibility of there being a usable clocksource, because there's nothing we + * can do without it. When libc fails the symbol lookup it should fall back on + * the standard syscall path. + */ +int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) +{ + const union mips_vdso_data *data = get_vdso_data(); + struct timespec ts; + int ret; + + ret = do_realtime(&ts, data); + if (ret) + return ret; + + if (tv) { + tv->tv_sec = ts.tv_sec; + tv->tv_usec = ts.tv_nsec / 1000; + } + + if (tz) { + tz->tz_minuteswest = data->tz_minuteswest; + tz->tz_dsttime = data->tz_dsttime; + } + + return 0; +} + +#endif /* CONFIG_CLKSRC_MIPS_GIC */ + +int __vdso_clock_gettime(clockid_t clkid, struct timespec *ts) +{ + const union mips_vdso_data *data = get_vdso_data(); + int ret; + + switch (clkid) { + case CLOCK_REALTIME_COARSE: + ret = do_realtime_coarse(ts, data); + break; + case CLOCK_MONOTONIC_COARSE: + ret = do_monotonic_coarse(ts, data); + break; + case CLOCK_REALTIME: + ret = do_realtime(ts, data); + break; + case CLOCK_MONOTONIC: + ret = do_monotonic(ts, data); + break; + default: + ret = -ENOSYS; + break; + } + + /* If we return -ENOSYS libc should fall back to a syscall. */ + return ret; +} diff --git a/arch/mips/vdso/sigreturn.S b/arch/mips/vdso/sigreturn.S new file mode 100644 index 000000000000..715bf5993529 --- /dev/null +++ b/arch/mips/vdso/sigreturn.S @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2015 Imagination Technologies + * Author: Alex Smith <alex.smith@imgtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include "vdso.h" + +#include <uapi/asm/unistd.h> + +#include <asm/regdef.h> +#include <asm/asm.h> + + .section .text + .cfi_sections .debug_frame + +LEAF(__vdso_rt_sigreturn) + .cfi_startproc + .frame sp, 0, ra + .mask 0x00000000, 0 + .fmask 0x00000000, 0 + .cfi_signal_frame + + li v0, __NR_rt_sigreturn + syscall + + .cfi_endproc + END(__vdso_rt_sigreturn) + +#if _MIPS_SIM == _MIPS_SIM_ABI32 + +LEAF(__vdso_sigreturn) + .cfi_startproc + .frame sp, 0, ra + .mask 0x00000000, 0 + .fmask 0x00000000, 0 + .cfi_signal_frame + + li v0, __NR_sigreturn + syscall + + .cfi_endproc + END(__vdso_sigreturn) + +#endif diff --git a/arch/mips/vdso/vdso.h b/arch/mips/vdso/vdso.h new file mode 100644 index 000000000000..cfb1be441dec --- /dev/null +++ b/arch/mips/vdso/vdso.h @@ -0,0 +1,89 @@ +/* + * Copyright (C) 2015 Imagination Technologies + * Author: Alex Smith <alex.smith@imgtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <asm/sgidefs.h> + +#if _MIPS_SIM != _MIPS_SIM_ABI64 && defined(CONFIG_64BIT) + +/* Building 32-bit VDSO for the 64-bit kernel. Fake a 32-bit Kconfig. */ +#undef CONFIG_64BIT +#define CONFIG_32BIT 1 +#ifndef __ASSEMBLY__ +#include <asm-generic/atomic64.h> +#endif +#endif + +#ifndef __ASSEMBLY__ + +#include <asm/asm.h> +#include <asm/page.h> +#include <asm/vdso.h> + +static inline unsigned long get_vdso_base(void) +{ + unsigned long addr; + + /* + * We can't use cpu_has_mips_r6 since it needs the cpu_data[] + * kernel symbol. + */ +#ifdef CONFIG_CPU_MIPSR6 + /* + * lapc <symbol> is an alias to addiupc reg, <symbol> - . + * + * We can't use addiupc because there is no label-label + * support for the addiupc reloc + */ + __asm__("lapc %0, _start \n" + : "=r" (addr) : :); +#else + /* + * Get the base load address of the VDSO. We have to avoid generating + * relocations and references to the GOT because ld.so does not peform + * relocations on the VDSO. We use the current offset from the VDSO base + * and perform a PC-relative branch which gives the absolute address in + * ra, and take the difference. The assembler chokes on + * "li %0, _start - .", so embed the offset as a word and branch over + * it. + * + */ + + __asm__( + " .set push \n" + " .set noreorder \n" + " bal 1f \n" + " nop \n" + " .word _start - . \n" + "1: lw %0, 0($31) \n" + " " STR(PTR_ADDU) " %0, $31, %0 \n" + " .set pop \n" + : "=r" (addr) + : + : "$31"); +#endif /* CONFIG_CPU_MIPSR6 */ + + return addr; +} + +static inline const union mips_vdso_data *get_vdso_data(void) +{ + return (const union mips_vdso_data *)(get_vdso_base() - PAGE_SIZE); +} + +#ifdef CONFIG_CLKSRC_MIPS_GIC + +static inline void __iomem *get_gic(const union mips_vdso_data *data) +{ + return (void __iomem *)data - PAGE_SIZE; +} + +#endif /* CONFIG_CLKSRC_MIPS_GIC */ + +#endif /* __ASSEMBLY__ */ diff --git a/arch/mips/vdso/vdso.lds.S b/arch/mips/vdso/vdso.lds.S new file mode 100644 index 000000000000..8df7dd53e8e0 --- /dev/null +++ b/arch/mips/vdso/vdso.lds.S @@ -0,0 +1,105 @@ +/* + * Copyright (C) 2015 Imagination Technologies + * Author: Alex Smith <alex.smith@imgtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <asm/sgidefs.h> + +#if _MIPS_SIM == _MIPS_SIM_ABI64 +OUTPUT_FORMAT("elf64-tradlittlemips", "elf64-tradbigmips", "elf64-tradlittlemips") +#elif _MIPS_SIM == _MIPS_SIM_NABI32 +OUTPUT_FORMAT("elf32-ntradlittlemips", "elf32-ntradbigmips", "elf32-ntradlittlemips") +#else +OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradbigmips", "elf32-tradlittlemips") +#endif + +OUTPUT_ARCH(mips) + +SECTIONS +{ + PROVIDE(_start = .); + . = SIZEOF_HEADERS; + + /* + * In order to retain compatibility with older toolchains we provide the + * ABI flags section ourself. Newer assemblers will automatically + * generate .MIPS.abiflags sections so we discard such input sections, + * and then manually define our own section here. genvdso will patch + * this section to have the correct name/type. + */ + .mips_abiflags : { *(.mips_abiflags) } :text :abiflags + + .reginfo : { *(.reginfo) } :text :reginfo + + .hash : { *(.hash) } :text + .gnu.hash : { *(.gnu.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .gnu.version : { *(.gnu.version) } + .gnu.version_d : { *(.gnu.version_d) } + .gnu.version_r : { *(.gnu.version_r) } + + .note : { *(.note.*) } :text :note + + .text : { *(.text*) } :text + PROVIDE (__etext = .); + PROVIDE (_etext = .); + PROVIDE (etext = .); + + .eh_frame_hdr : { *(.eh_frame_hdr) } :text :eh_frame_hdr + .eh_frame : { KEEP (*(.eh_frame)) } :text + + .dynamic : { *(.dynamic) } :text :dynamic + + .rodata : { *(.rodata*) } :text + + _end = .; + PROVIDE(end = .); + + /DISCARD/ : { + *(.MIPS.abiflags) + *(.gnu.attributes) + *(.note.GNU-stack) + *(.data .data.* .gnu.linkonce.d.* .sdata*) + *(.bss .sbss .dynbss .dynsbss) + } +} + +PHDRS +{ + /* + * Provide a PT_MIPS_ABIFLAGS header to assign the ABI flags section + * to. We can specify the header type directly here so no modification + * is needed later on. + */ + abiflags 0x70000003; + + /* + * The ABI flags header must exist directly after the PT_INTERP header, + * so we must explicitly place the PT_MIPS_REGINFO header after it to + * stop the linker putting one in at the start. + */ + reginfo 0x70000000; + + text PT_LOAD FLAGS(5) FILEHDR PHDRS; /* PF_R|PF_X */ + dynamic PT_DYNAMIC FLAGS(4); /* PF_R */ + note PT_NOTE FLAGS(4); /* PF_R */ + eh_frame_hdr PT_GNU_EH_FRAME; +} + +VERSION +{ + LINUX_2.6 { +#ifndef DISABLE_MIPS_VDSO + global: + __vdso_clock_gettime; + __vdso_gettimeofday; +#endif + local: *; + }; +} diff --git a/arch/mips/xilfpga/Kconfig b/arch/mips/xilfpga/Kconfig new file mode 100644 index 000000000000..42a030a0edba --- /dev/null +++ b/arch/mips/xilfpga/Kconfig @@ -0,0 +1,9 @@ +choice + prompt "Machine type" + depends on MACH_XILFPGA + default XILFPGA_NEXYS4DDR + +config XILFPGA_NEXYS4DDR + bool "Nexys4DDR by Digilent" + +endchoice diff --git a/arch/mips/xilfpga/Makefile b/arch/mips/xilfpga/Makefile new file mode 100644 index 000000000000..a4deec6fadbc --- /dev/null +++ b/arch/mips/xilfpga/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the Xilfpga +# + +obj-y += init.o +obj-y += intc.o +obj-y += time.o diff --git a/arch/mips/xilfpga/Platform b/arch/mips/xilfpga/Platform new file mode 100644 index 000000000000..ed375afe3d39 --- /dev/null +++ b/arch/mips/xilfpga/Platform @@ -0,0 +1,3 @@ +platform-$(CONFIG_MACH_XILFPGA) += xilfpga/ +cflags-$(CONFIG_MACH_XILFPGA) += -I$(srctree)/arch/mips/include/asm/mach-xilfpga +load-$(CONFIG_MACH_XILFPGA) += 0xffffffff80100000 diff --git a/arch/mips/xilfpga/init.c b/arch/mips/xilfpga/init.c new file mode 100644 index 000000000000..ce2aee2169ac --- /dev/null +++ b/arch/mips/xilfpga/init.c @@ -0,0 +1,57 @@ +/* + * Xilfpga platform setup + * + * Copyright (C) 2015 Imagination Technologies + * Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include <linux/of_fdt.h> +#include <linux/of_platform.h> + +#include <asm/prom.h> + +#define XILFPGA_UART_BASE 0xb0401000 + +const char *get_system_type(void) +{ + return "MIPSfpga"; +} + +void __init plat_mem_setup(void) +{ + __dt_setup_arch(__dtb_start); + strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); +} + +void __init prom_init(void) +{ + setup_8250_early_printk_port(XILFPGA_UART_BASE, 2, 50000); +} + +void __init prom_free_prom_memory(void) +{ +} + +void __init device_tree_init(void) +{ + if (!initial_boot_params) + return; + + unflatten_and_copy_device_tree(); +} + +static int __init plat_of_setup(void) +{ + if (!of_have_populated_dt()) + panic("Device tree not present"); + + if (of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL)) + panic("Failed to populate DT"); + + return 0; +} +arch_initcall(plat_of_setup); diff --git a/arch/mips/xilfpga/intc.c b/arch/mips/xilfpga/intc.c new file mode 100644 index 000000000000..c4d1a716b347 --- /dev/null +++ b/arch/mips/xilfpga/intc.c @@ -0,0 +1,25 @@ +/* + * Xilfpga interrupt controller setup + * + * Copyright (C) 2015 Imagination Technologies + * Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include <linux/of.h> +#include <linux/of_irq.h> + +#include <asm/irq_cpu.h> + +static struct of_device_id of_irq_ids[] __initdata = { + { .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init }, + {}, +}; + +void __init arch_init_irq(void) +{ + of_irq_init(of_irq_ids); +} diff --git a/arch/mips/xilfpga/time.c b/arch/mips/xilfpga/time.c new file mode 100644 index 000000000000..cbb3fca7b6fa --- /dev/null +++ b/arch/mips/xilfpga/time.c @@ -0,0 +1,41 @@ +/* + * Xilfpga clocksource/timer setup + * + * Copyright (C) 2015 Imagination Technologies + * Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/clocksource.h> +#include <linux/of.h> + +#include <asm/time.h> + +void __init plat_time_init(void) +{ + struct device_node *np; + struct clk *clk; + + of_clk_init(NULL); + clocksource_probe(); + + np = of_get_cpu_node(0, NULL); + if (!np) { + pr_err("Failed to get CPU node\n"); + return; + } + + clk = of_clk_get(np, 0); + if (IS_ERR(clk)) { + pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk)); + return; + } + + mips_hpt_frequency = clk_get_rate(clk) / 2; + clk_put(clk); +} diff --git a/arch/nios2/include/asm/cmpxchg.h b/arch/nios2/include/asm/cmpxchg.h index 85938711542d..a7978f14d157 100644 --- a/arch/nios2/include/asm/cmpxchg.h +++ b/arch/nios2/include/asm/cmpxchg.h @@ -9,53 +9,6 @@ #ifndef _ASM_NIOS2_CMPXCHG_H #define _ASM_NIOS2_CMPXCHG_H -#include <linux/irqflags.h> - -#define xchg(ptr, x) \ - ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) - -struct __xchg_dummy { unsigned long a[100]; }; -#define __xg(x) ((volatile struct __xchg_dummy *)(x)) - -static inline unsigned long __xchg(unsigned long x, volatile void *ptr, - int size) -{ - unsigned long tmp, flags; - - local_irq_save(flags); - - switch (size) { - case 1: - __asm__ __volatile__( - "ldb %0, %2\n" - "stb %1, %2\n" - : "=&r" (tmp) - : "r" (x), "m" (*__xg(ptr)) - : "memory"); - break; - case 2: - __asm__ __volatile__( - "ldh %0, %2\n" - "sth %1, %2\n" - : "=&r" (tmp) - : "r" (x), "m" (*__xg(ptr)) - : "memory"); - break; - case 4: - __asm__ __volatile__( - "ldw %0, %2\n" - "stw %1, %2\n" - : "=&r" (tmp) - : "r" (x), "m" (*__xg(ptr)) - : "memory"); - break; - } - - local_irq_restore(flags); - return tmp; -} - #include <asm-generic/cmpxchg.h> -#include <asm-generic/cmpxchg-local.h> #endif /* _ASM_NIOS2_CMPXCHG_H */ diff --git a/arch/nios2/kernel/setup.c b/arch/nios2/kernel/setup.c index b101a43d3c5a..a4ff86d58d5c 100644 --- a/arch/nios2/kernel/setup.c +++ b/arch/nios2/kernel/setup.c @@ -104,7 +104,7 @@ asmlinkage void __init nios2_boot_init(unsigned r4, unsigned r5, unsigned r6, unsigned r7) { unsigned dtb_passed = 0; - char cmdline_passed[COMMAND_LINE_SIZE] = { 0, }; + char cmdline_passed[COMMAND_LINE_SIZE] __maybe_unused = { 0, }; #if defined(CONFIG_NIOS2_PASS_CMDLINE) if (r4 == 0x534f494e) { /* r4 is magic NIOS */ diff --git a/arch/nios2/lib/memmove.c b/arch/nios2/lib/memmove.c index c65ef517eb80..866c021f278c 100644 --- a/arch/nios2/lib/memmove.c +++ b/arch/nios2/lib/memmove.c @@ -10,7 +10,6 @@ #include <linux/types.h> #include <linux/string.h> -#ifdef __HAVE_ARCH_MEMMOVE void *memmove(void *d, const void *s, size_t count) { unsigned long dst, src; @@ -79,4 +78,3 @@ restdown: return d; } -#endif /* __HAVE_ARCH_MEMMOVE */ diff --git a/arch/nios2/lib/memset.c b/arch/nios2/lib/memset.c index 65e97802f5cc..c2cfcb121e34 100644 --- a/arch/nios2/lib/memset.c +++ b/arch/nios2/lib/memset.c @@ -10,7 +10,6 @@ #include <linux/types.h> #include <linux/string.h> -#ifdef __HAVE_ARCH_MEMSET void *memset(void *s, int c, size_t count) { int destptr, charcnt, dwordcnt, fill8reg, wrkrega; @@ -78,4 +77,3 @@ void *memset(void *s, int c, size_t count) return s; } -#endif /* __HAVE_ARCH_MEMSET */ diff --git a/arch/parisc/include/asm/cacheflush.h b/arch/parisc/include/asm/cacheflush.h index ec2df4bab302..845272ce9cc5 100644 --- a/arch/parisc/include/asm/cacheflush.h +++ b/arch/parisc/include/asm/cacheflush.h @@ -156,7 +156,6 @@ static inline void __kunmap_atomic(void *addr) #define kmap_atomic_prot(page, prot) kmap_atomic(page) #define kmap_atomic_pfn(pfn) kmap_atomic(pfn_to_page(pfn)) -#define kmap_atomic_to_page(ptr) virt_to_page(ptr) #endif /* _PARISC_CACHEFLUSH_H */ diff --git a/arch/parisc/include/asm/compat.h b/arch/parisc/include/asm/compat.h index 94710cfc1ce8..0448a2c8eafb 100644 --- a/arch/parisc/include/asm/compat.h +++ b/arch/parisc/include/asm/compat.h @@ -206,10 +206,10 @@ struct compat_ipc64_perm { struct compat_semid64_ds { struct compat_ipc64_perm sem_perm; - compat_time_t sem_otime; unsigned int __unused1; - compat_time_t sem_ctime; + compat_time_t sem_otime; unsigned int __unused2; + compat_time_t sem_ctime; compat_ulong_t sem_nsems; compat_ulong_t __unused3; compat_ulong_t __unused4; diff --git a/arch/parisc/include/uapi/asm/ipcbuf.h b/arch/parisc/include/uapi/asm/ipcbuf.h index bd956c425785..790c4119f647 100644 --- a/arch/parisc/include/uapi/asm/ipcbuf.h +++ b/arch/parisc/include/uapi/asm/ipcbuf.h @@ -1,6 +1,9 @@ #ifndef __PARISC_IPCBUF_H__ #define __PARISC_IPCBUF_H__ +#include <asm/bitsperlong.h> +#include <linux/posix_types.h> + /* * The ipc64_perm structure for PA-RISC is almost identical to * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the kernel. @@ -10,16 +13,18 @@ struct ipc64_perm { - key_t key; - uid_t uid; - gid_t gid; - uid_t cuid; - gid_t cgid; + __kernel_key_t key; + __kernel_uid_t uid; + __kernel_gid_t gid; + __kernel_uid_t cuid; + __kernel_gid_t cgid; +#if __BITS_PER_LONG != 64 unsigned short int __pad1; - mode_t mode; +#endif + __kernel_mode_t mode; unsigned short int __pad2; unsigned short int seq; - unsigned int __pad3; + unsigned int __pad3; unsigned long long int __unused1; unsigned long long int __unused2; }; diff --git a/arch/parisc/include/uapi/asm/msgbuf.h b/arch/parisc/include/uapi/asm/msgbuf.h index 342138983914..2e83ac758e19 100644 --- a/arch/parisc/include/uapi/asm/msgbuf.h +++ b/arch/parisc/include/uapi/asm/msgbuf.h @@ -27,13 +27,13 @@ struct msqid64_ds { unsigned int __pad3; #endif __kernel_time_t msg_ctime; /* last change time */ - unsigned int msg_cbytes; /* current number of bytes on queue */ - unsigned int msg_qnum; /* number of messages in queue */ - unsigned int msg_qbytes; /* max number of bytes on queue */ + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ __kernel_pid_t msg_lspid; /* pid of last msgsnd */ __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned int __unused1; - unsigned int __unused2; + unsigned long __unused1; + unsigned long __unused2; }; #endif /* _PARISC_MSGBUF_H */ diff --git a/arch/parisc/include/uapi/asm/posix_types.h b/arch/parisc/include/uapi/asm/posix_types.h index b9344256f76b..f3b5f70b9a5f 100644 --- a/arch/parisc/include/uapi/asm/posix_types.h +++ b/arch/parisc/include/uapi/asm/posix_types.h @@ -7,8 +7,10 @@ * assume GCC is being used. */ +#ifndef __LP64__ typedef unsigned short __kernel_mode_t; #define __kernel_mode_t __kernel_mode_t +#endif typedef unsigned short __kernel_ipc_pid_t; #define __kernel_ipc_pid_t __kernel_ipc_pid_t diff --git a/arch/parisc/include/uapi/asm/sembuf.h b/arch/parisc/include/uapi/asm/sembuf.h index f01d89e30d73..c20971bf520f 100644 --- a/arch/parisc/include/uapi/asm/sembuf.h +++ b/arch/parisc/include/uapi/asm/sembuf.h @@ -23,9 +23,9 @@ struct semid64_ds { unsigned int __pad2; #endif __kernel_time_t sem_ctime; /* last change time */ - unsigned int sem_nsems; /* no. of semaphores in array */ - unsigned int __unused1; - unsigned int __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused1; + unsigned long __unused2; }; #endif /* _PARISC_SEMBUF_H */ diff --git a/arch/parisc/include/uapi/asm/shmbuf.h b/arch/parisc/include/uapi/asm/shmbuf.h index 8496c38560c6..750e13e77991 100644 --- a/arch/parisc/include/uapi/asm/shmbuf.h +++ b/arch/parisc/include/uapi/asm/shmbuf.h @@ -30,12 +30,12 @@ struct shmid64_ds { #if __BITS_PER_LONG != 64 unsigned int __pad4; #endif - size_t shm_segsz; /* size of segment (bytes) */ + __kernel_size_t shm_segsz; /* size of segment (bytes) */ __kernel_pid_t shm_cpid; /* pid of creator */ __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned int shm_nattch; /* no. of current attaches */ - unsigned int __unused1; - unsigned int __unused2; + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused1; + unsigned long __unused2; }; struct shminfo64 { diff --git a/arch/parisc/include/uapi/asm/stat.h b/arch/parisc/include/uapi/asm/stat.h index b606b366d0a7..3310d2a49759 100644 --- a/arch/parisc/include/uapi/asm/stat.h +++ b/arch/parisc/include/uapi/asm/stat.h @@ -36,37 +36,6 @@ struct stat { #define STAT_HAVE_NSEC -struct hpux_stat64 { - unsigned int st_dev; /* dev_t is 32 bits on parisc */ - unsigned int st_ino; /* 32 bits */ - unsigned short st_mode; /* 16 bits */ - unsigned short st_nlink; /* 16 bits */ - unsigned short st_reserved1; /* old st_uid */ - unsigned short st_reserved2; /* old st_gid */ - unsigned int st_rdev; - signed long long st_size; - signed int st_atime; - unsigned int st_spare1; - signed int st_mtime; - unsigned int st_spare2; - signed int st_ctime; - unsigned int st_spare3; - int st_blksize; - unsigned long long st_blocks; - unsigned int __unused1; /* ACL stuff */ - unsigned int __unused2; /* network */ - unsigned int __unused3; /* network */ - unsigned int __unused4; /* cnodes */ - unsigned short __unused5; /* netsite */ - short st_fstype; - unsigned int st_realdev; - unsigned short st_basemode; - unsigned short st_spareshort; - unsigned int st_uid; - unsigned int st_gid; - unsigned int st_spare4[3]; -}; - /* This is the struct that 32-bit userspace applications are expecting. * How 64-bit apps are going to be compiled, I have no idea. But at least * this way, we don't have a wrapper in the kernel. diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index c229427fa546..c5fec4890fdf 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -23,6 +23,7 @@ #include <linux/unistd.h> #include <linux/nodemask.h> /* for node_online_map */ #include <linux/pagemap.h> /* for release_pages and page_cache_release */ +#include <linux/compat.h> #include <asm/pgalloc.h> #include <asm/pgtable.h> @@ -30,6 +31,7 @@ #include <asm/pdc_chassis.h> #include <asm/mmzone.h> #include <asm/sections.h> +#include <asm/msgbuf.h> extern int data_start; extern void parisc_kernel_start(void); /* Kernel entry point in head.S */ @@ -590,6 +592,20 @@ unsigned long pcxl_dma_start __read_mostly; void __init mem_init(void) { + /* Do sanity checks on IPC (compat) structures */ + BUILD_BUG_ON(sizeof(struct ipc64_perm) != 48); +#ifndef CONFIG_64BIT + BUILD_BUG_ON(sizeof(struct semid64_ds) != 80); + BUILD_BUG_ON(sizeof(struct msqid64_ds) != 104); + BUILD_BUG_ON(sizeof(struct shmid64_ds) != 104); +#endif +#ifdef CONFIG_COMPAT + BUILD_BUG_ON(sizeof(struct compat_ipc64_perm) != sizeof(struct ipc64_perm)); + BUILD_BUG_ON(sizeof(struct compat_semid64_ds) != 80); + BUILD_BUG_ON(sizeof(struct compat_msqid64_ds) != 104); + BUILD_BUG_ON(sizeof(struct compat_shmid64_ds) != 104); +#endif + /* Do sanity checks on page table constants */ BUILD_BUG_ON(PTE_ENTRY_SIZE != sizeof(pte_t)); BUILD_BUG_ON(PMD_ENTRY_SIZE != sizeof(pmd_t)); diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h index caaf6e00630d..01c2c23b307e 100644 --- a/arch/powerpc/include/asm/highmem.h +++ b/arch/powerpc/include/asm/highmem.h @@ -84,19 +84,6 @@ static inline void *kmap_atomic(struct page *page) return kmap_atomic_prot(page, kmap_prot); } -static inline struct page *kmap_atomic_to_page(void *ptr) -{ - unsigned long idx, vaddr = (unsigned long) ptr; - pte_t *pte; - - if (vaddr < FIXADDR_START) - return virt_to_page(ptr); - - idx = virt_to_fix(vaddr); - pte = kmap_pte - (idx - FIX_KMAP_BEGIN); - return pte_page(*pte); -} - #define flush_cache_kmaps() flush_cache_all() diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 9c26c5a96ea2..54b45b73195f 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -2019,7 +2019,7 @@ static bool can_split_piggybacked_subcores(struct core_info *cip) return false; n_subcores += (cip->subcore_threads[sub] - 1) >> 1; } - if (n_subcores > 3 || large_sub < 0) + if (large_sub < 0 || !subcore_config_ok(n_subcores + 1, 2)) return false; /* diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index b1dab8d1d885..3c6badcd53ef 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -1749,7 +1749,8 @@ kvmppc_hdsi: beq 3f clrrdi r0, r4, 28 PPC_SLBFEE_DOT(R5, R0) /* if so, look up SLB */ - bne 1f /* if no SLB entry found */ + li r0, BOOK3S_INTERRUPT_DATA_SEGMENT + bne 7f /* if no SLB entry found */ 4: std r4, VCPU_FAULT_DAR(r9) stw r6, VCPU_FAULT_DSISR(r9) @@ -1768,14 +1769,15 @@ kvmppc_hdsi: cmpdi r3, -2 /* MMIO emulation; need instr word */ beq 2f - /* Synthesize a DSI for the guest */ + /* Synthesize a DSI (or DSegI) for the guest */ ld r4, VCPU_FAULT_DAR(r9) mr r6, r3 -1: mtspr SPRN_DAR, r4 +1: li r0, BOOK3S_INTERRUPT_DATA_STORAGE mtspr SPRN_DSISR, r6 +7: mtspr SPRN_DAR, r4 mtspr SPRN_SRR0, r10 mtspr SPRN_SRR1, r11 - li r10, BOOK3S_INTERRUPT_DATA_STORAGE + mr r10, r0 bl kvmppc_msr_interrupt fast_interrupt_c_return: 6: ld r7, VCPU_CTR(r9) @@ -1823,7 +1825,8 @@ kvmppc_hisi: beq 3f clrrdi r0, r10, 28 PPC_SLBFEE_DOT(R5, R0) /* if so, look up SLB */ - bne 1f /* if no SLB entry found */ + li r0, BOOK3S_INTERRUPT_INST_SEGMENT + bne 7f /* if no SLB entry found */ 4: /* Search the hash table. */ mr r3, r9 /* vcpu pointer */ @@ -1840,11 +1843,12 @@ kvmppc_hisi: cmpdi r3, -1 /* handle in kernel mode */ beq guest_exit_cont - /* Synthesize an ISI for the guest */ + /* Synthesize an ISI (or ISegI) for the guest */ mr r11, r3 -1: mtspr SPRN_SRR0, r10 +1: li r0, BOOK3S_INTERRUPT_INST_STORAGE +7: mtspr SPRN_SRR0, r10 mtspr SPRN_SRR1, r11 - li r10, BOOK3S_INTERRUPT_INST_STORAGE + mr r10, r0 bl kvmppc_msr_interrupt b fast_interrupt_c_return diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c index d2b79bc336c1..7a399b4d60a0 100644 --- a/arch/powerpc/sysdev/axonram.c +++ b/arch/powerpc/sysdev/axonram.c @@ -103,7 +103,7 @@ axon_ram_irq_handler(int irq, void *dev) * axon_ram_make_request - make_request() method for block device * @queue, @bio: see blk_queue_make_request() */ -static void +static blk_qc_t axon_ram_make_request(struct request_queue *queue, struct bio *bio) { struct axon_ram_bank *bank = bio->bi_bdev->bd_disk->private_data; @@ -120,7 +120,7 @@ axon_ram_make_request(struct request_queue *queue, struct bio *bio) bio_for_each_segment(vec, bio, iter) { if (unlikely(phys_mem + vec.bv_len > phys_end)) { bio_io_error(bio); - return; + return BLK_QC_T_NONE; } user_mem = page_address(vec.bv_page) + vec.bv_offset; @@ -133,6 +133,7 @@ axon_ram_make_request(struct request_queue *queue, struct bio *bio) transfered += vec.bv_len; } bio_endio(bio); + return BLK_QC_T_NONE; } /** diff --git a/arch/sparc/include/uapi/asm/unistd.h b/arch/sparc/include/uapi/asm/unistd.h index 6f35f4df17f2..efe9479f837b 100644 --- a/arch/sparc/include/uapi/asm/unistd.h +++ b/arch/sparc/include/uapi/asm/unistd.h @@ -416,8 +416,9 @@ #define __NR_memfd_create 348 #define __NR_bpf 349 #define __NR_execveat 350 +#define __NR_membarrier 351 -#define NR_syscalls 351 +#define NR_syscalls 352 /* Bitmask values returned from kern_features system call. */ #define KERN_FEATURE_MIXED_MODE_STACK 0x00000001 diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index e31a9056a303..cc23b62b6e38 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -87,4 +87,4 @@ sys_call_table: /*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev /*340*/ .long sys_ni_syscall, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr /*345*/ .long sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf -/*350*/ .long sys_execveat +/*350*/ .long sys_execveat, sys_membarrier diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index d72f76ae70eb..f229468a7479 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -88,7 +88,7 @@ sys_call_table32: .word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev /*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr .word sys32_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf -/*350*/ .word sys32_execveat +/*350*/ .word sys32_execveat, sys_membarrier #endif /* CONFIG_COMPAT */ @@ -168,4 +168,4 @@ sys_call_table: .word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev /*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr .word sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf -/*350*/ .word sys64_execveat +/*350*/ .word sys64_execveat, sys_membarrier diff --git a/arch/tile/include/asm/highmem.h b/arch/tile/include/asm/highmem.h index fc8429a31c85..979579b38e57 100644 --- a/arch/tile/include/asm/highmem.h +++ b/arch/tile/include/asm/highmem.h @@ -63,7 +63,6 @@ void *kmap_atomic(struct page *page); void __kunmap_atomic(void *kvaddr); void *kmap_atomic_pfn(unsigned long pfn); void *kmap_atomic_prot_pfn(unsigned long pfn, pgprot_t prot); -struct page *kmap_atomic_to_page(void *ptr); void *kmap_atomic_prot(struct page *page, pgprot_t prot); void kmap_atomic_fix_kpte(struct page *page, int finished); diff --git a/arch/tile/mm/highmem.c b/arch/tile/mm/highmem.c index fcd545014e79..eca28551b22d 100644 --- a/arch/tile/mm/highmem.c +++ b/arch/tile/mm/highmem.c @@ -275,15 +275,3 @@ void *kmap_atomic_prot_pfn(unsigned long pfn, pgprot_t prot) { return kmap_atomic_prot(pfn_to_page(pfn), prot); } - -struct page *kmap_atomic_to_page(void *ptr) -{ - pte_t *pte; - unsigned long vaddr = (unsigned long)ptr; - - if (vaddr < FIXADDR_START) - return virt_to_page(ptr); - - pte = kmap_get_pte(vaddr); - return pte_page(*pte); -} diff --git a/arch/um/Makefile b/arch/um/Makefile index e3abe6f3156d..25ed4098640e 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -131,7 +131,7 @@ export LDS_ELF_FORMAT := $(ELF_FORMAT) # The wrappers will select whether using "malloc" or the kernel allocator. LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc -LD_FLAGS_CMDLINE = $(foreach opt,$(LDFLAGS),-Wl,$(opt)) +LD_FLAGS_CMDLINE = $(foreach opt,$(LDFLAGS),-Wl,$(opt)) -lrt # Used by link-vmlinux.sh which has special support for um link export CFLAGS_vmlinux := $(LINK-y) $(LINK_WRAPS) $(LD_FLAGS_CMDLINE) diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index f70dd540655d..9ef669d24bb2 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -388,7 +388,7 @@ static const struct net_device_ops uml_netdev_ops = { static int driver_registered; static void eth_configure(int n, void *init, char *mac, - struct transport *transport) + struct transport *transport, gfp_t gfp_mask) { struct uml_net *device; struct net_device *dev; @@ -397,7 +397,7 @@ static void eth_configure(int n, void *init, char *mac, size = transport->private_size + sizeof(struct uml_net_private); - device = kzalloc(sizeof(*device), GFP_KERNEL); + device = kzalloc(sizeof(*device), gfp_mask); if (device == NULL) { printk(KERN_ERR "eth_configure failed to allocate struct " "uml_net\n"); @@ -568,7 +568,7 @@ static LIST_HEAD(transports); static LIST_HEAD(eth_cmd_line); static int check_transport(struct transport *transport, char *eth, int n, - void **init_out, char **mac_out) + void **init_out, char **mac_out, gfp_t gfp_mask) { int len; @@ -582,7 +582,7 @@ static int check_transport(struct transport *transport, char *eth, int n, else if (*eth != '\0') return 0; - *init_out = kmalloc(transport->setup_size, GFP_KERNEL); + *init_out = kmalloc(transport->setup_size, gfp_mask); if (*init_out == NULL) return 1; @@ -609,11 +609,11 @@ void register_transport(struct transport *new) list_for_each_safe(ele, next, ð_cmd_line) { eth = list_entry(ele, struct eth_init, list); match = check_transport(new, eth->init, eth->index, &init, - &mac); + &mac, GFP_KERNEL); if (!match) continue; else if (init != NULL) { - eth_configure(eth->index, init, mac, new); + eth_configure(eth->index, init, mac, new, GFP_KERNEL); kfree(init); } list_del(ð->list); @@ -631,10 +631,11 @@ static int eth_setup_common(char *str, int index) spin_lock(&transports_lock); list_for_each(ele, &transports) { transport = list_entry(ele, struct transport, list); - if (!check_transport(transport, str, index, &init, &mac)) + if (!check_transport(transport, str, index, &init, + &mac, GFP_ATOMIC)) continue; if (init != NULL) { - eth_configure(index, init, mac, transport); + eth_configure(index, init, mac, transport, GFP_ATOMIC); kfree(init); } found = 1; diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h index 2966adbbdf6c..5ab20620fc97 100644 --- a/arch/um/include/asm/ptrace-generic.h +++ b/arch/um/include/asm/ptrace-generic.h @@ -27,6 +27,8 @@ struct pt_regs { #define instruction_pointer(regs) PT_REGS_IP(regs) +#define PTRACE_OLDSETOPTIONS 21 + struct task_struct; extern long subarch_ptrace(struct task_struct *child, long request, diff --git a/arch/um/include/shared/os.h b/arch/um/include/shared/os.h index ad3fa3ae6d34..868e6c3f83dd 100644 --- a/arch/um/include/shared/os.h +++ b/arch/um/include/shared/os.h @@ -1,4 +1,6 @@ /* + * Copyright (C) 2015 Anton Ivanov (aivanov@{brocade.com,kot-begemot.co.uk}) + * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de) * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) * Licensed under the GPL */ @@ -183,6 +185,7 @@ extern int create_mem_file(unsigned long long len); /* process.c */ extern unsigned long os_process_pc(int pid); extern int os_process_parent(int pid); +extern void os_alarm_process(int pid); extern void os_stop_process(int pid); extern void os_kill_process(int pid, int reap_child); extern void os_kill_ptraced_process(int pid, int reap_child); @@ -217,7 +220,7 @@ extern int set_umid(char *name); extern char *get_umid(void); /* signal.c */ -extern void timer_init(void); +extern void timer_set_signal_handler(void); extern void set_sigstack(void *sig_stack, int size); extern void remove_sigstack(void); extern void set_handler(int sig); @@ -227,6 +230,7 @@ extern void unblock_signals(void); extern int get_signals(void); extern int set_signals(int enable); extern int os_is_signal_stack(void); +extern void deliver_alarm(void); /* util.c */ extern void stack_protections(unsigned long address); @@ -238,12 +242,16 @@ extern void um_early_printk(const char *s, unsigned int n); extern void os_fix_helper_signals(void); /* time.c */ -extern void idle_sleep(unsigned long long nsecs); -extern int set_interval(void); -extern int timer_one_shot(int ticks); -extern long long disable_timer(void); +extern void os_idle_sleep(unsigned long long nsecs); +extern int os_timer_create(void* timer); +extern int os_timer_set_interval(void* timer, void* its); +extern int os_timer_one_shot(int ticks); +extern long long os_timer_disable(void); +extern long os_timer_remain(void* timer); extern void uml_idle_timer(void); +extern long long os_persistent_clock_emulation(void); extern long long os_nsecs(void); +extern long long os_vnsecs(void); /* skas/mem.c */ extern long run_syscall_stub(struct mm_id * mm_idp, @@ -274,6 +282,7 @@ extern void initial_thread_cb_skas(void (*proc)(void *), void *arg); extern void halt_skas(void); extern void reboot_skas(void); +extern int get_syscall(struct uml_pt_regs *regs); /* irq.c */ extern int os_waiting_for_events(struct irq_fd *active_fds); diff --git a/arch/um/include/shared/skas/stub-data.h b/arch/um/include/shared/skas/stub-data.h index f6ed92c3727d..a9deece956bf 100644 --- a/arch/um/include/shared/skas/stub-data.h +++ b/arch/um/include/shared/skas/stub-data.h @@ -1,4 +1,6 @@ /* + + * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de) * Copyright (C) 2005 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -6,12 +8,11 @@ #ifndef __STUB_DATA_H #define __STUB_DATA_H -#include <sys/time.h> +#include <time.h> struct stub_data { - long offset; + unsigned long offset; int fd; - struct itimerval timer; long err; }; diff --git a/arch/um/include/shared/timer-internal.h b/arch/um/include/shared/timer-internal.h new file mode 100644 index 000000000000..03e6f217f807 --- /dev/null +++ b/arch/um/include/shared/timer-internal.h @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2012 - 2014 Cisco Systems + * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) + * Licensed under the GPL + */ + +#ifndef __TIMER_INTERNAL_H__ +#define __TIMER_INTERNAL_H__ + +#define TIMER_MULTIPLIER 256 +#define TIMER_MIN_DELTA 500 + +#endif diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c index a6d922672b9f..48af59aae129 100644 --- a/arch/um/kernel/process.c +++ b/arch/um/kernel/process.c @@ -1,4 +1,6 @@ /* + * Copyright (C) 2015 Anton Ivanov (aivanov@{brocade.com,kot-begemot.co.uk}) + * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de) * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) * Copyright 2003 PathScale, Inc. * Licensed under the GPL @@ -27,6 +29,7 @@ #include <kern_util.h> #include <os.h> #include <skas.h> +#include <timer-internal.h> /* * This is a per-cpu array. A processor only modifies its entry and it only @@ -203,11 +206,8 @@ void initial_thread_cb(void (*proc)(void *), void *arg) void arch_cpu_idle(void) { - unsigned long long nsecs; - cpu_tasks[current_thread_info()->cpu].pid = os_getpid(); - nsecs = disable_timer(); - idle_sleep(nsecs); + os_idle_sleep(UM_NSEC_PER_SEC); local_irq_enable(); } diff --git a/arch/um/kernel/skas/clone.c b/arch/um/kernel/skas/clone.c index 289771dadf81..0f25d41b1031 100644 --- a/arch/um/kernel/skas/clone.c +++ b/arch/um/kernel/skas/clone.c @@ -1,4 +1,5 @@ /* + * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de) * Copyright (C) 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) * Licensed under the GPL */ @@ -35,11 +36,6 @@ stub_clone_handler(void) if (err) goto out; - err = stub_syscall3(__NR_setitimer, ITIMER_VIRTUAL, - (long) &data->timer, 0); - if (err) - goto out; - remap_stack(data->fd, data->offset); goto done; diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c index fda1deba1757..9591a66aa5c5 100644 --- a/arch/um/kernel/skas/mmu.c +++ b/arch/um/kernel/skas/mmu.c @@ -1,4 +1,5 @@ /* + * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de) * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) * Licensed under the GPL */ @@ -61,10 +62,12 @@ int init_new_context(struct task_struct *task, struct mm_struct *mm) if (current->mm != NULL && current->mm != &init_mm) from_mm = ¤t->mm->context; + block_signals(); if (from_mm) to_mm->id.u.pid = copy_context_skas0(stack, from_mm->id.u.pid); else to_mm->id.u.pid = start_userspace(stack); + unblock_signals(); if (to_mm->id.u.pid < 0) { ret = to_mm->id.u.pid; diff --git a/arch/um/kernel/skas/syscall.c b/arch/um/kernel/skas/syscall.c index d9ec0068b623..1683b8efdfda 100644 --- a/arch/um/kernel/skas/syscall.c +++ b/arch/um/kernel/skas/syscall.c @@ -8,9 +8,7 @@ #include <kern_util.h> #include <sysdep/ptrace.h> #include <sysdep/syscalls.h> - -extern int syscall_table_size; -#define NR_SYSCALLS (syscall_table_size / sizeof(void *)) +#include <os.h> void handle_syscall(struct uml_pt_regs *r) { @@ -23,19 +21,12 @@ void handle_syscall(struct uml_pt_regs *r) goto out; } - /* - * This should go in the declaration of syscall, but when I do that, - * strace -f -c bash -c 'ls ; ls' breaks, sometimes not tracing - * children at all, sometimes hanging when bash doesn't see the first - * ls exit. - * The assembly looks functionally the same to me. This is - * gcc version 4.0.1 20050727 (Red Hat 4.0.1-5) - * in case it's a compiler bug. - */ - syscall = UPT_SYSCALL_NR(r); - if ((syscall >= NR_SYSCALLS) || (syscall < 0)) + syscall = get_syscall(r); + + if ((syscall > __NR_syscall_max) || syscall < 0) result = -ENOSYS; - else result = EXECUTE_SYSCALL(syscall, regs); + else + result = EXECUTE_SYSCALL(syscall, regs); out: PT_REGS_SET_SYSCALL_RETURN(regs, result); diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c index 5af441efb377..25c23666d592 100644 --- a/arch/um/kernel/time.c +++ b/arch/um/kernel/time.c @@ -1,4 +1,7 @@ /* + * Copyright (C) 2015 Anton Ivanov (aivanov@{brocade.com,kot-begemot.co.uk}) + * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de) + * Copyright (C) 2012-2014 Cisco Systems * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) * Licensed under the GPL */ @@ -7,11 +10,15 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/jiffies.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/spinlock.h> #include <linux/threads.h> #include <asm/irq.h> #include <asm/param.h> #include <kern_util.h> #include <os.h> +#include <timer-internal.h> void timer_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs) { @@ -24,81 +31,97 @@ void timer_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs) static int itimer_shutdown(struct clock_event_device *evt) { - disable_timer(); + os_timer_disable(); return 0; } static int itimer_set_periodic(struct clock_event_device *evt) { - set_interval(); + os_timer_set_interval(NULL, NULL); return 0; } static int itimer_next_event(unsigned long delta, struct clock_event_device *evt) { - return timer_one_shot(delta + 1); + return os_timer_one_shot(delta); } -static struct clock_event_device itimer_clockevent = { - .name = "itimer", +static int itimer_one_shot(struct clock_event_device *evt) +{ + os_timer_one_shot(1); + return 0; +} + +static struct clock_event_device timer_clockevent = { + .name = "posix-timer", .rating = 250, .cpumask = cpu_all_mask, .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_state_shutdown = itimer_shutdown, .set_state_periodic = itimer_set_periodic, - .set_state_oneshot = itimer_shutdown, + .set_state_oneshot = itimer_one_shot, .set_next_event = itimer_next_event, - .shift = 32, + .shift = 0, + .max_delta_ns = 0xffffffff, + .min_delta_ns = TIMER_MIN_DELTA, //microsecond resolution should be enough for anyone, same as 640K RAM .irq = 0, + .mult = 1, }; static irqreturn_t um_timer(int irq, void *dev) { - (*itimer_clockevent.event_handler)(&itimer_clockevent); + if (get_current()->mm != NULL) + { + /* userspace - relay signal, results in correct userspace timers */ + os_alarm_process(get_current()->mm->context.id.u.pid); + } + + (*timer_clockevent.event_handler)(&timer_clockevent); return IRQ_HANDLED; } -static cycle_t itimer_read(struct clocksource *cs) +static cycle_t timer_read(struct clocksource *cs) { - return os_nsecs() / 1000; + return os_nsecs() / TIMER_MULTIPLIER; } -static struct clocksource itimer_clocksource = { - .name = "itimer", +static struct clocksource timer_clocksource = { + .name = "timer", .rating = 300, - .read = itimer_read, + .read = timer_read, .mask = CLOCKSOURCE_MASK(64), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static void __init setup_itimer(void) +static void __init timer_setup(void) { int err; - err = request_irq(TIMER_IRQ, um_timer, 0, "timer", NULL); + err = request_irq(TIMER_IRQ, um_timer, IRQF_TIMER, "hr timer", NULL); if (err != 0) printk(KERN_ERR "register_timer : request_irq failed - " "errno = %d\n", -err); - itimer_clockevent.mult = div_sc(HZ, NSEC_PER_SEC, 32); - itimer_clockevent.max_delta_ns = - clockevent_delta2ns(60 * HZ, &itimer_clockevent); - itimer_clockevent.min_delta_ns = - clockevent_delta2ns(1, &itimer_clockevent); - err = clocksource_register_hz(&itimer_clocksource, USEC_PER_SEC); + err = os_timer_create(NULL); + if (err != 0) { + printk(KERN_ERR "creation of timer failed - errno = %d\n", -err); + return; + } + + err = clocksource_register_hz(&timer_clocksource, NSEC_PER_SEC/TIMER_MULTIPLIER); if (err) { printk(KERN_ERR "clocksource_register_hz returned %d\n", err); return; } - clockevents_register_device(&itimer_clockevent); + clockevents_register_device(&timer_clockevent); } void read_persistent_clock(struct timespec *ts) { - long long nsecs = os_nsecs(); + long long nsecs = os_persistent_clock_emulation(); set_normalized_timespec(ts, nsecs / NSEC_PER_SEC, nsecs % NSEC_PER_SEC); @@ -106,6 +129,6 @@ void read_persistent_clock(struct timespec *ts) void __init time_init(void) { - timer_init(); - late_time_init = setup_itimer; + timer_set_signal_handler(); + late_time_init = timer_setup; } diff --git a/arch/um/kernel/tlb.c b/arch/um/kernel/tlb.c index 2077248e8a72..3777b82759bd 100644 --- a/arch/um/kernel/tlb.c +++ b/arch/um/kernel/tlb.c @@ -50,6 +50,13 @@ struct host_vm_change { .index = 0, \ .force = force }) +static void report_enomem(void) +{ + printk(KERN_ERR "UML ran out of memory on the host side! " + "This can happen due to a memory limitation or " + "vm.max_map_count has been reached.\n"); +} + static int do_ops(struct host_vm_change *hvc, int end, int finished) { @@ -81,6 +88,9 @@ static int do_ops(struct host_vm_change *hvc, int end, } } + if (ret == -ENOMEM) + report_enomem(); + return ret; } @@ -433,8 +443,12 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long address) else if (pte_newprot(*pte)) err = protect(mm_id, address, PAGE_SIZE, prot, 1, &flush); - if (err) + if (err) { + if (err == -ENOMEM) + report_enomem(); + goto kill; + } *pte = pte_mkuptodate(*pte); diff --git a/arch/um/os-Linux/internal.h b/arch/um/os-Linux/internal.h deleted file mode 100644 index 0dc2c9f135f6..000000000000 --- a/arch/um/os-Linux/internal.h +++ /dev/null @@ -1 +0,0 @@ -void alarm_handler(int sig, struct siginfo *unused_si, mcontext_t *mc); diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c index df9191acd926..9d499de87e63 100644 --- a/arch/um/os-Linux/main.c +++ b/arch/um/os-Linux/main.c @@ -1,4 +1,5 @@ /* + * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de) * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) * Licensed under the GPL */ @@ -163,13 +164,13 @@ int __init main(int argc, char **argv, char **envp) /* * This signal stuff used to be in the reboot case. However, - * sometimes a SIGVTALRM can come in when we're halting (reproducably + * sometimes a timer signal can come in when we're halting (reproducably * when writing out gcov information, presumably because that takes * some time) and cause a segfault. */ - /* stop timers and set SIGVTALRM to be ignored */ - disable_timer(); + /* stop timers and set timer signal to be ignored */ + os_timer_disable(); /* disable SIGIO for the fds and set SIGIO to be ignored */ err = deactivate_all_fds(); diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c index 8408aba915b2..b3e0d40932e1 100644 --- a/arch/um/os-Linux/process.c +++ b/arch/um/os-Linux/process.c @@ -1,4 +1,5 @@ /* + * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de) * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) * Licensed under the GPL */ @@ -89,6 +90,11 @@ int os_process_parent(int pid) return parent; } +void os_alarm_process(int pid) +{ + kill(pid, SIGALRM); +} + void os_stop_process(int pid) { kill(pid, SIGSTOP); diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c index 036d0dbc7b52..c211153ca69a 100644 --- a/arch/um/os-Linux/signal.c +++ b/arch/um/os-Linux/signal.c @@ -1,4 +1,6 @@ /* + * Copyright (C) 2015 Anton Ivanov (aivanov@{brocade.com,kot-begemot.co.uk}) + * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de) * Copyright (C) 2004 PathScale, Inc * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) * Licensed under the GPL @@ -13,7 +15,6 @@ #include <kern_util.h> #include <os.h> #include <sysdep/mcontext.h> -#include "internal.h" void (*sig_info[NSIG])(int, struct siginfo *, struct uml_pt_regs *) = { [SIGTRAP] = relay_signal, @@ -23,7 +24,8 @@ void (*sig_info[NSIG])(int, struct siginfo *, struct uml_pt_regs *) = { [SIGBUS] = bus_handler, [SIGSEGV] = segv_handler, [SIGIO] = sigio_handler, - [SIGVTALRM] = timer_handler }; + [SIGALRM] = timer_handler +}; static void sig_handler_common(int sig, struct siginfo *si, mcontext_t *mc) { @@ -38,7 +40,7 @@ static void sig_handler_common(int sig, struct siginfo *si, mcontext_t *mc) } /* enable signals if sig isn't IRQ signal */ - if ((sig != SIGIO) && (sig != SIGWINCH) && (sig != SIGVTALRM)) + if ((sig != SIGIO) && (sig != SIGWINCH) && (sig != SIGALRM)) unblock_signals(); (*sig_info[sig])(sig, si, &r); @@ -55,8 +57,8 @@ static void sig_handler_common(int sig, struct siginfo *si, mcontext_t *mc) #define SIGIO_BIT 0 #define SIGIO_MASK (1 << SIGIO_BIT) -#define SIGVTALRM_BIT 1 -#define SIGVTALRM_MASK (1 << SIGVTALRM_BIT) +#define SIGALRM_BIT 1 +#define SIGALRM_MASK (1 << SIGALRM_BIT) static int signals_enabled; static unsigned int signals_pending; @@ -78,36 +80,38 @@ void sig_handler(int sig, struct siginfo *si, mcontext_t *mc) set_signals(enabled); } -static void real_alarm_handler(mcontext_t *mc) +static void timer_real_alarm_handler(mcontext_t *mc) { struct uml_pt_regs regs; if (mc != NULL) get_regs_from_mc(®s, mc); - regs.is_user = 0; - unblock_signals(); - timer_handler(SIGVTALRM, NULL, ®s); + timer_handler(SIGALRM, NULL, ®s); } -void alarm_handler(int sig, struct siginfo *unused_si, mcontext_t *mc) +void timer_alarm_handler(int sig, struct siginfo *unused_si, mcontext_t *mc) { int enabled; enabled = signals_enabled; if (!signals_enabled) { - signals_pending |= SIGVTALRM_MASK; + signals_pending |= SIGALRM_MASK; return; } block_signals(); - real_alarm_handler(mc); + timer_real_alarm_handler(mc); set_signals(enabled); } -void timer_init(void) +void deliver_alarm(void) { + timer_alarm_handler(SIGALRM, NULL, NULL); +} + +void timer_set_signal_handler(void) { - set_handler(SIGVTALRM); + set_handler(SIGALRM); } void set_sigstack(void *sig_stack, int size) @@ -131,10 +135,9 @@ static void (*handlers[_NSIG])(int sig, struct siginfo *si, mcontext_t *mc) = { [SIGIO] = sig_handler, [SIGWINCH] = sig_handler, - [SIGVTALRM] = alarm_handler + [SIGALRM] = timer_alarm_handler }; - static void hard_handler(int sig, siginfo_t *si, void *p) { struct ucontext *uc = p; @@ -188,9 +191,9 @@ void set_handler(int sig) /* block irq ones */ sigemptyset(&action.sa_mask); - sigaddset(&action.sa_mask, SIGVTALRM); sigaddset(&action.sa_mask, SIGIO); sigaddset(&action.sa_mask, SIGWINCH); + sigaddset(&action.sa_mask, SIGALRM); if (sig == SIGSEGV) flags |= SA_NODEFER; @@ -283,8 +286,8 @@ void unblock_signals(void) if (save_pending & SIGIO_MASK) sig_handler_common(SIGIO, NULL, NULL); - if (save_pending & SIGVTALRM_MASK) - real_alarm_handler(NULL); + if (save_pending & SIGALRM_MASK) + timer_real_alarm_handler(NULL); } } diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c index 3dddedba3a07..b856c66ebd3a 100644 --- a/arch/um/os-Linux/skas/process.c +++ b/arch/um/os-Linux/skas/process.c @@ -1,4 +1,5 @@ /* + * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de) * Copyright (C) 2002- 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) * Licensed under the GPL */ @@ -45,7 +46,7 @@ static int ptrace_dump_regs(int pid) * Signals that are OK to receive in the stub - we'll just continue it. * SIGWINCH will happen when UML is inside a detached screen. */ -#define STUB_SIG_MASK ((1 << SIGVTALRM) | (1 << SIGWINCH)) +#define STUB_SIG_MASK ((1 << SIGALRM) | (1 << SIGWINCH)) /* Signals that the stub will finish with - anything else is an error */ #define STUB_DONE_MASK (1 << SIGTRAP) @@ -137,9 +138,6 @@ static void handle_trap(int pid, struct uml_pt_regs *regs, if ((UPT_IP(regs) >= STUB_START) && (UPT_IP(regs) < STUB_END)) fatal_sigsegv(); - /* Mark this as a syscall */ - UPT_SYSCALL_NR(regs) = PT_SYSCALL_NR(regs->gp); - if (!local_using_sysemu) { err = ptrace(PTRACE_POKEUSER, pid, PT_SYSCALL_NR_OFFSET, @@ -174,24 +172,25 @@ static void handle_trap(int pid, struct uml_pt_regs *regs, handle_syscall(regs); } +int get_syscall(struct uml_pt_regs *regs) +{ + UPT_SYSCALL_NR(regs) = PT_SYSCALL_NR(regs->gp); + + return UPT_SYSCALL_NR(regs); +} + extern char __syscall_stub_start[]; static int userspace_tramp(void *stack) { void *addr; - int err, fd; + int fd; unsigned long long offset; ptrace(PTRACE_TRACEME, 0, 0, 0); signal(SIGTERM, SIG_DFL); signal(SIGWINCH, SIG_IGN); - err = set_interval(); - if (err) { - printk(UM_KERN_ERR "userspace_tramp - setting timer failed, " - "errno = %d\n", err); - exit(1); - } /* * This has a pte, but it can't be mapped in with the usual @@ -282,7 +281,7 @@ int start_userspace(unsigned long stub_stack) "errno = %d\n", errno); goto out_kill; } - } while (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGVTALRM)); + } while (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGALRM)); if (!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP)) { err = -EINVAL; @@ -315,8 +314,6 @@ int start_userspace(unsigned long stub_stack) void userspace(struct uml_pt_regs *regs) { - struct itimerval timer; - unsigned long long nsecs, now; int err, status, op, pid = userspace_pid[0]; /* To prevent races if using_sysemu changes under us.*/ int local_using_sysemu; @@ -325,13 +322,8 @@ void userspace(struct uml_pt_regs *regs) /* Handle any immediate reschedules or signals */ interrupt_end(); - if (getitimer(ITIMER_VIRTUAL, &timer)) - printk(UM_KERN_ERR "Failed to get itimer, errno = %d\n", errno); - nsecs = timer.it_value.tv_sec * UM_NSEC_PER_SEC + - timer.it_value.tv_usec * UM_NSEC_PER_USEC; - nsecs += os_nsecs(); - while (1) { + /* * This can legitimately fail if the process loads a * bogus value into a segment register. It will @@ -401,18 +393,7 @@ void userspace(struct uml_pt_regs *regs) case SIGTRAP: relay_signal(SIGTRAP, (struct siginfo *)&si, regs); break; - case SIGVTALRM: - now = os_nsecs(); - if (now < nsecs) - break; - block_signals(); - (*sig_info[sig])(sig, (struct siginfo *)&si, regs); - unblock_signals(); - nsecs = timer.it_value.tv_sec * - UM_NSEC_PER_SEC + - timer.it_value.tv_usec * - UM_NSEC_PER_USEC; - nsecs += os_nsecs(); + case SIGALRM: break; case SIGIO: case SIGILL: @@ -460,7 +441,6 @@ __initcall(init_thread_regs); int copy_context_skas0(unsigned long new_stack, int pid) { - struct timeval tv = { .tv_sec = 0, .tv_usec = UM_USEC_PER_SEC / UM_HZ }; int err; unsigned long current_stack = current_stub_stack(); struct stub_data *data = (struct stub_data *) current_stack; @@ -472,11 +452,10 @@ int copy_context_skas0(unsigned long new_stack, int pid) * prepare offset and fd of child's stack as argument for parent's * and child's mmap2 calls */ - *data = ((struct stub_data) { .offset = MMAP_OFFSET(new_offset), - .fd = new_fd, - .timer = ((struct itimerval) - { .it_value = tv, - .it_interval = tv }) }); + *data = ((struct stub_data) { + .offset = MMAP_OFFSET(new_offset), + .fd = new_fd + }); err = ptrace_setregs(pid, thread_regs); if (err < 0) { diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c index e9824d5dd7d5..0e39b9978729 100644 --- a/arch/um/os-Linux/time.c +++ b/arch/um/os-Linux/time.c @@ -1,4 +1,7 @@ /* + * Copyright (C) 2015 Anton Ivanov (aivanov@{brocade.com,kot-begemot.co.uk}) + * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de) + * Copyright (C) 2012-2014 Cisco Systems * Copyright (C) 2000 - 2007 Jeff Dike (jdike{addtoit,linux.intel}.com) * Licensed under the GPL */ @@ -10,177 +13,177 @@ #include <sys/time.h> #include <kern_util.h> #include <os.h> -#include "internal.h" +#include <string.h> +#include <timer-internal.h> -int set_interval(void) -{ - int usec = UM_USEC_PER_SEC / UM_HZ; - struct itimerval interval = ((struct itimerval) { { 0, usec }, - { 0, usec } }); - - if (setitimer(ITIMER_VIRTUAL, &interval, NULL) == -1) - return -errno; +static timer_t event_high_res_timer = 0; - return 0; +static inline long long timeval_to_ns(const struct timeval *tv) +{ + return ((long long) tv->tv_sec * UM_NSEC_PER_SEC) + + tv->tv_usec * UM_NSEC_PER_USEC; } -int timer_one_shot(int ticks) +static inline long long timespec_to_ns(const struct timespec *ts) { - unsigned long usec = ticks * UM_USEC_PER_SEC / UM_HZ; - unsigned long sec = usec / UM_USEC_PER_SEC; - struct itimerval interval; - - usec %= UM_USEC_PER_SEC; - interval = ((struct itimerval) { { 0, 0 }, { sec, usec } }); + return ((long long) ts->tv_sec * UM_NSEC_PER_SEC) + + ts->tv_nsec; +} - if (setitimer(ITIMER_VIRTUAL, &interval, NULL) == -1) - return -errno; +long long os_persistent_clock_emulation (void) { + struct timespec realtime_tp; - return 0; + clock_gettime(CLOCK_REALTIME, &realtime_tp); + return timespec_to_ns(&realtime_tp); } /** - * timeval_to_ns - Convert timeval to nanoseconds - * @ts: pointer to the timeval variable to be converted - * - * Returns the scalar nanosecond representation of the timeval - * parameter. - * - * Ripped from linux/time.h because it's a kernel header, and thus - * unusable from here. + * os_timer_create() - create an new posix (interval) timer */ -static inline long long timeval_to_ns(const struct timeval *tv) -{ - return ((long long) tv->tv_sec * UM_NSEC_PER_SEC) + - tv->tv_usec * UM_NSEC_PER_USEC; +int os_timer_create(void* timer) { + + timer_t* t = timer; + + if(t == NULL) { + t = &event_high_res_timer; + } + + if (timer_create( + CLOCK_MONOTONIC, + NULL, + t) == -1) { + return -1; + } + return 0; } -long long disable_timer(void) +int os_timer_set_interval(void* timer, void* i) { - struct itimerval time = ((struct itimerval) { { 0, 0 }, { 0, 0 } }); - long long remain, max = UM_NSEC_PER_SEC / UM_HZ; + struct itimerspec its; + unsigned long long nsec; + timer_t* t = timer; + struct itimerspec* its_in = i; - if (setitimer(ITIMER_VIRTUAL, &time, &time) < 0) - printk(UM_KERN_ERR "disable_timer - setitimer failed, " - "errno = %d\n", errno); + if(t == NULL) { + t = &event_high_res_timer; + } - remain = timeval_to_ns(&time.it_value); - if (remain > max) - remain = max; + nsec = UM_NSEC_PER_SEC / UM_HZ; - return remain; -} + if(its_in != NULL) { + its.it_value.tv_sec = its_in->it_value.tv_sec; + its.it_value.tv_nsec = its_in->it_value.tv_nsec; + } else { + its.it_value.tv_sec = 0; + its.it_value.tv_nsec = nsec; + } -long long os_nsecs(void) -{ - struct timeval tv; + its.it_interval.tv_sec = 0; + its.it_interval.tv_nsec = nsec; - gettimeofday(&tv, NULL); - return timeval_to_ns(&tv); -} + if(timer_settime(*t, 0, &its, NULL) == -1) { + return -errno; + } -#ifdef UML_CONFIG_NO_HZ_COMMON -static int after_sleep_interval(struct timespec *ts) -{ return 0; } -static void deliver_alarm(void) +/** + * os_timer_remain() - returns the remaining nano seconds of the given interval + * timer + * Because this is the remaining time of an interval timer, which correspondends + * to HZ, this value can never be bigger than one second. Just + * the nanosecond part of the timer is returned. + * The returned time is relative to the start time of the interval timer. + * Return an negative value in an error case. + */ +long os_timer_remain(void* timer) { - alarm_handler(SIGVTALRM, NULL, NULL); -} + struct itimerspec its; + timer_t* t = timer; -static unsigned long long sleep_time(unsigned long long nsecs) -{ - return nsecs; -} + if(t == NULL) { + t = &event_high_res_timer; + } -#else -unsigned long long last_tick; -unsigned long long skew; + if(timer_gettime(t, &its) == -1) { + return -errno; + } -static void deliver_alarm(void) -{ - unsigned long long this_tick = os_nsecs(); - int one_tick = UM_NSEC_PER_SEC / UM_HZ; + return its.it_value.tv_nsec; +} - /* Protection against the host's time going backwards */ - if ((last_tick != 0) && (this_tick < last_tick)) - this_tick = last_tick; +int os_timer_one_shot(int ticks) +{ + struct itimerspec its; + unsigned long long nsec; + unsigned long sec; - if (last_tick == 0) - last_tick = this_tick - one_tick; + nsec = (ticks + 1); + sec = nsec / UM_NSEC_PER_SEC; + nsec = nsec % UM_NSEC_PER_SEC; - skew += this_tick - last_tick; + its.it_value.tv_sec = nsec / UM_NSEC_PER_SEC; + its.it_value.tv_nsec = nsec; - while (skew >= one_tick) { - alarm_handler(SIGVTALRM, NULL, NULL); - skew -= one_tick; - } + its.it_interval.tv_sec = 0; + its.it_interval.tv_nsec = 0; // we cheat here - last_tick = this_tick; + timer_settime(event_high_res_timer, 0, &its, NULL); + return 0; } -static unsigned long long sleep_time(unsigned long long nsecs) +/** + * os_timer_disable() - disable the posix (interval) timer + * Returns the remaining interval timer time in nanoseconds + */ +long long os_timer_disable(void) { - return nsecs > skew ? nsecs - skew : 0; -} + struct itimerspec its; -static inline long long timespec_to_us(const struct timespec *ts) -{ - return ((long long) ts->tv_sec * UM_USEC_PER_SEC) + - ts->tv_nsec / UM_NSEC_PER_USEC; + memset(&its, 0, sizeof(struct itimerspec)); + timer_settime(event_high_res_timer, 0, &its, &its); + + return its.it_value.tv_sec * UM_NSEC_PER_SEC + its.it_value.tv_nsec; } -static int after_sleep_interval(struct timespec *ts) +long long os_vnsecs(void) { - int usec = UM_USEC_PER_SEC / UM_HZ; - long long start_usecs = timespec_to_us(ts); - struct timeval tv; - struct itimerval interval; - - /* - * It seems that rounding can increase the value returned from - * setitimer to larger than the one passed in. Over time, - * this will cause the remaining time to be greater than the - * tick interval. If this happens, then just reduce the first - * tick to the interval value. - */ - if (start_usecs > usec) - start_usecs = usec; - - start_usecs -= skew / UM_NSEC_PER_USEC; - if (start_usecs < 0) - start_usecs = 0; + struct timespec ts; - tv = ((struct timeval) { .tv_sec = start_usecs / UM_USEC_PER_SEC, - .tv_usec = start_usecs % UM_USEC_PER_SEC }); - interval = ((struct itimerval) { { 0, usec }, tv }); + clock_gettime(CLOCK_PROCESS_CPUTIME_ID,&ts); + return timespec_to_ns(&ts); +} - if (setitimer(ITIMER_VIRTUAL, &interval, NULL) == -1) - return -errno; +long long os_nsecs(void) +{ + struct timespec ts; - return 0; + clock_gettime(CLOCK_MONOTONIC,&ts); + return timespec_to_ns(&ts); } -#endif -void idle_sleep(unsigned long long nsecs) +/** + * os_idle_sleep() - sleep for a given time of nsecs + * @nsecs: nanoseconds to sleep + */ +void os_idle_sleep(unsigned long long nsecs) { struct timespec ts; - /* - * nsecs can come in as zero, in which case, this starts a - * busy loop. To prevent this, reset nsecs to the tick - * interval if it is zero. - */ - if (nsecs == 0) - nsecs = UM_NSEC_PER_SEC / UM_HZ; + if (nsecs <= 0) { + return; + } - nsecs = sleep_time(nsecs); - ts = ((struct timespec) { .tv_sec = nsecs / UM_NSEC_PER_SEC, - .tv_nsec = nsecs % UM_NSEC_PER_SEC }); + ts = ((struct timespec) { + .tv_sec = nsecs / UM_NSEC_PER_SEC, + .tv_nsec = nsecs % UM_NSEC_PER_SEC + }); - if (nanosleep(&ts, &ts) == 0) + /* + * Relay the signal if clock_nanosleep is interrupted. + */ + if (clock_nanosleep(CLOCK_MONOTONIC, 0, &ts, NULL)) { deliver_alarm(); - after_sleep_interval(&ts); + } } diff --git a/arch/unicore32/kernel/puv3-nb0916.c b/arch/unicore32/kernel/puv3-nb0916.c index 46ebfdccbc31..aab5f341dec0 100644 --- a/arch/unicore32/kernel/puv3-nb0916.c +++ b/arch/unicore32/kernel/puv3-nb0916.c @@ -19,6 +19,7 @@ #include <linux/reboot.h> #include <linux/interrupt.h> #include <linux/i2c.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> #include <linux/gpio_keys.h> @@ -49,11 +50,14 @@ static struct resource puv3_i2c_resources[] = { } }; +static struct pwm_lookup nb0916_pwm_lookup[] = { + PWM_LOOKUP("PKUnity-v3-PWM", 0, "pwm-backlight", NULL, 70 * 1024, + PWM_POLARITY_NORMAL), +}; + static struct platform_pwm_backlight_data nb0916_backlight_data = { - .pwm_id = 0, .max_brightness = 100, .dft_brightness = 100, - .pwm_period_ns = 70 * 1024, .enable_gpio = -1, }; @@ -112,6 +116,8 @@ int __init mach_nb0916_init(void) platform_device_register_simple("PKUnity-v3-I2C", -1, puv3_i2c_resources, ARRAY_SIZE(puv3_i2c_resources)); + pwm_add_table(nb0916_pwm_lookup, ARRAY_SIZE(nb0916_pwm_lookup)); + platform_device_register_data(NULL, "pwm-backlight", -1, &nb0916_backlight_data, sizeof(nb0916_backlight_data)); diff --git a/arch/x86/include/asm/highmem.h b/arch/x86/include/asm/highmem.h index 04e9d023168f..1c0b43724ce3 100644 --- a/arch/x86/include/asm/highmem.h +++ b/arch/x86/include/asm/highmem.h @@ -68,7 +68,6 @@ void *kmap_atomic(struct page *page); void __kunmap_atomic(void *kvaddr); void *kmap_atomic_pfn(unsigned long pfn); void *kmap_atomic_prot_pfn(unsigned long pfn, pgprot_t prot); -struct page *kmap_atomic_to_page(void *ptr); #define flush_cache_kmaps() do { } while (0) diff --git a/arch/x86/include/asm/i8259.h b/arch/x86/include/asm/i8259.h index ccffa53750a8..39bcefc20de7 100644 --- a/arch/x86/include/asm/i8259.h +++ b/arch/x86/include/asm/i8259.h @@ -60,6 +60,7 @@ struct legacy_pic { void (*mask_all)(void); void (*restore_mask)(void); void (*init)(int auto_eoi); + int (*probe)(void); int (*irq_pending)(unsigned int irq); void (*make_irq)(unsigned int irq); }; diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 9265196e877f..30cfd64295a0 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -505,6 +505,7 @@ struct kvm_vcpu_arch { u32 virtual_tsc_mult; u32 virtual_tsc_khz; s64 ia32_tsc_adjust_msr; + u64 tsc_scaling_ratio; atomic_t nmi_queued; /* unprocessed asynchronous NMIs */ unsigned nmi_pending; /* NMI queued after currently running handler */ @@ -777,7 +778,7 @@ struct kvm_x86_ops { void (*vcpu_load)(struct kvm_vcpu *vcpu, int cpu); void (*vcpu_put)(struct kvm_vcpu *vcpu); - void (*update_db_bp_intercept)(struct kvm_vcpu *vcpu); + void (*update_bp_intercept)(struct kvm_vcpu *vcpu); int (*get_msr)(struct kvm_vcpu *vcpu, struct msr_data *msr); int (*set_msr)(struct kvm_vcpu *vcpu, struct msr_data *msr); u64 (*get_segment_base)(struct kvm_vcpu *vcpu, int seg); @@ -844,7 +845,7 @@ struct kvm_x86_ops { int (*get_lpage_level)(void); bool (*rdtscp_supported)(void); bool (*invpcid_supported)(void); - void (*adjust_tsc_offset)(struct kvm_vcpu *vcpu, s64 adjustment, bool host); + void (*adjust_tsc_offset_guest)(struct kvm_vcpu *vcpu, s64 adjustment); void (*set_tdp_cr3)(struct kvm_vcpu *vcpu, unsigned long cr3); @@ -852,11 +853,9 @@ struct kvm_x86_ops { bool (*has_wbinvd_exit)(void); - void (*set_tsc_khz)(struct kvm_vcpu *vcpu, u32 user_tsc_khz, bool scale); u64 (*read_tsc_offset)(struct kvm_vcpu *vcpu); void (*write_tsc_offset)(struct kvm_vcpu *vcpu, u64 offset); - u64 (*compute_tsc_offset)(struct kvm_vcpu *vcpu, u64 target_tsc); u64 (*read_l1_tsc)(struct kvm_vcpu *vcpu, u64 host_tsc); void (*get_exit_info)(struct kvm_vcpu *vcpu, u64 *info1, u64 *info2); @@ -923,17 +922,6 @@ struct kvm_arch_async_pf { extern struct kvm_x86_ops *kvm_x86_ops; -static inline void adjust_tsc_offset_guest(struct kvm_vcpu *vcpu, - s64 adjustment) -{ - kvm_x86_ops->adjust_tsc_offset(vcpu, adjustment, false); -} - -static inline void adjust_tsc_offset_host(struct kvm_vcpu *vcpu, s64 adjustment) -{ - kvm_x86_ops->adjust_tsc_offset(vcpu, adjustment, true); -} - int kvm_mmu_module_init(void); void kvm_mmu_module_exit(void); @@ -986,10 +974,12 @@ u64 vcpu_tsc_khz(struct kvm_vcpu *vcpu); /* control of guest tsc rate supported? */ extern bool kvm_has_tsc_control; -/* minimum supported tsc_khz for guests */ -extern u32 kvm_min_guest_tsc_khz; /* maximum supported tsc_khz for guests */ extern u32 kvm_max_guest_tsc_khz; +/* number of bits of the fractional part of the TSC scaling ratio */ +extern u8 kvm_tsc_scaling_ratio_frac_bits; +/* maximum allowed value of TSC scaling ratio */ +extern u64 kvm_max_tsc_scaling_ratio; enum emulation_result { EMULATE_DONE, /* no further processing */ @@ -1235,6 +1225,9 @@ void kvm_arch_mmu_notifier_invalidate_page(struct kvm *kvm, void kvm_define_shared_msr(unsigned index, u32 msr); int kvm_set_shared_msr(unsigned index, u64 val, u64 mask); +u64 kvm_scale_tsc(struct kvm_vcpu *vcpu, u64 tsc); +u64 kvm_read_l1_tsc(struct kvm_vcpu *vcpu, u64 host_tsc); + unsigned long kvm_get_linear_rip(struct kvm_vcpu *vcpu); bool kvm_is_linear_rip(struct kvm_vcpu *vcpu, unsigned long linear_rip); diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h index aa336ff3e03e..14c63c7e8337 100644 --- a/arch/x86/include/asm/vmx.h +++ b/arch/x86/include/asm/vmx.h @@ -73,6 +73,7 @@ #define SECONDARY_EXEC_ENABLE_PML 0x00020000 #define SECONDARY_EXEC_XSAVES 0x00100000 #define SECONDARY_EXEC_PCOMMIT 0x00200000 +#define SECONDARY_EXEC_TSC_SCALING 0x02000000 #define PIN_BASED_EXT_INTR_MASK 0x00000001 #define PIN_BASED_NMI_EXITING 0x00000008 @@ -167,6 +168,8 @@ enum vmcs_field { VMWRITE_BITMAP = 0x00002028, XSS_EXIT_BITMAP = 0x0000202C, XSS_EXIT_BITMAP_HIGH = 0x0000202D, + TSC_MULTIPLIER = 0x00002032, + TSC_MULTIPLIER_HIGH = 0x00002033, GUEST_PHYSICAL_ADDRESS = 0x00002400, GUEST_PHYSICAL_ADDRESS_HIGH = 0x00002401, VMCS_LINK_POINTER = 0x00002800, diff --git a/arch/x86/include/uapi/asm/svm.h b/arch/x86/include/uapi/asm/svm.h index b5d7640abc5d..8a4add8e4639 100644 --- a/arch/x86/include/uapi/asm/svm.h +++ b/arch/x86/include/uapi/asm/svm.h @@ -100,6 +100,7 @@ { SVM_EXIT_EXCP_BASE + UD_VECTOR, "UD excp" }, \ { SVM_EXIT_EXCP_BASE + PF_VECTOR, "PF excp" }, \ { SVM_EXIT_EXCP_BASE + NM_VECTOR, "NM excp" }, \ + { SVM_EXIT_EXCP_BASE + AC_VECTOR, "AC excp" }, \ { SVM_EXIT_EXCP_BASE + MC_VECTOR, "MC excp" }, \ { SVM_EXIT_INTR, "interrupt" }, \ { SVM_EXIT_NMI, "nmi" }, \ diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c index 836d11b92811..861bc59c8f25 100644 --- a/arch/x86/kernel/apic/vector.c +++ b/arch/x86/kernel/apic/vector.c @@ -361,7 +361,11 @@ int __init arch_probe_nr_irqs(void) if (nr < nr_irqs) nr_irqs = nr; - return nr_legacy_irqs(); + /* + * We don't know if PIC is present at this point so we need to do + * probe() to get the right number of legacy IRQs. + */ + return legacy_pic->probe(); } #ifdef CONFIG_X86_IO_APIC diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 4a70fc6d400a..a8816b325162 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -352,6 +352,7 @@ static void amd_detect_cmp(struct cpuinfo_x86 *c) #ifdef CONFIG_SMP unsigned bits; int cpu = smp_processor_id(); + unsigned int socket_id, core_complex_id; bits = c->x86_coreid_bits; /* Low order bits define the core id (index of core in socket) */ @@ -361,6 +362,18 @@ static void amd_detect_cmp(struct cpuinfo_x86 *c) /* use socket ID also for last level cache */ per_cpu(cpu_llc_id, cpu) = c->phys_proc_id; amd_get_topology(c); + + /* + * Fix percpu cpu_llc_id here as LLC topology is different + * for Fam17h systems. + */ + if (c->x86 != 0x17 || !cpuid_edx(0x80000006)) + return; + + socket_id = (c->apicid >> bits) - 1; + core_complex_id = (c->apicid & ((1 << bits) - 1)) >> 3; + + per_cpu(cpu_llc_id, cpu) = (socket_id << 3) | core_complex_id; #endif } diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 98a13db5f4be..209ac1e7d1f0 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -97,6 +97,7 @@ static void early_init_intel(struct cpuinfo_x86 *c) switch (c->x86_model) { case 0x27: /* Penwell */ case 0x35: /* Cloverview */ + case 0x4a: /* Merrifield */ set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC_S3); break; default: diff --git a/arch/x86/kernel/cpu/perf_event_intel_rapl.c b/arch/x86/kernel/cpu/perf_event_intel_rapl.c index 81431c0f0614..ed446bdcbf31 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_rapl.c +++ b/arch/x86/kernel/cpu/perf_event_intel_rapl.c @@ -107,12 +107,6 @@ static ssize_t __rapl_##_var##_show(struct kobject *kobj, \ static struct kobj_attribute format_attr_##_var = \ __ATTR(_name, 0444, __rapl_##_var##_show, NULL) -#define RAPL_EVENT_DESC(_name, _config) \ -{ \ - .attr = __ATTR(_name, 0444, rapl_event_show, NULL), \ - .config = _config, \ -} - #define RAPL_CNTR_WIDTH 32 /* 32-bit rapl counters */ #define RAPL_EVENT_ATTR_STR(_name, v, str) \ diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 1d40ca8a73f2..ffdc0e860390 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -65,6 +65,9 @@ startup_64: * tables and then reload them. */ + /* Sanitize CPU configuration */ + call verify_cpu + /* * Compute the delta between the address I am compiled to run at and the * address I am actually running at. @@ -174,6 +177,9 @@ ENTRY(secondary_startup_64) * after the boot processor executes this code. */ + /* Sanitize CPU configuration */ + call verify_cpu + movq $(init_level4_pgt - __START_KERNEL_map), %rax 1: @@ -288,6 +294,8 @@ ENTRY(secondary_startup_64) pushq %rax # target address in negative space lretq +#include "verify_cpu.S" + #ifdef CONFIG_HOTPLUG_CPU /* * Boot CPU0 entry point. It's called from play_dead(). Everything has been set diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 16cb827a5b27..be22f5a2192e 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -295,16 +295,11 @@ static void unmask_8259A(void) raw_spin_unlock_irqrestore(&i8259A_lock, flags); } -static void init_8259A(int auto_eoi) +static int probe_8259A(void) { unsigned long flags; unsigned char probe_val = ~(1 << PIC_CASCADE_IR); unsigned char new_val; - - i8259A_auto_eoi = auto_eoi; - - raw_spin_lock_irqsave(&i8259A_lock, flags); - /* * Check to see if we have a PIC. * Mask all except the cascade and read @@ -312,16 +307,28 @@ static void init_8259A(int auto_eoi) * have a PIC, we will read 0xff as opposed to the * value we wrote. */ + raw_spin_lock_irqsave(&i8259A_lock, flags); + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ outb(probe_val, PIC_MASTER_IMR); new_val = inb(PIC_MASTER_IMR); if (new_val != probe_val) { printk(KERN_INFO "Using NULL legacy PIC\n"); legacy_pic = &null_legacy_pic; - raw_spin_unlock_irqrestore(&i8259A_lock, flags); - return; } + raw_spin_unlock_irqrestore(&i8259A_lock, flags); + return nr_legacy_irqs(); +} + +static void init_8259A(int auto_eoi) +{ + unsigned long flags; + + i8259A_auto_eoi = auto_eoi; + + raw_spin_lock_irqsave(&i8259A_lock, flags); + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ /* @@ -379,6 +386,10 @@ static int legacy_pic_irq_pending_noop(unsigned int irq) { return 0; } +static int legacy_pic_probe(void) +{ + return 0; +} struct legacy_pic null_legacy_pic = { .nr_legacy_irqs = 0, @@ -388,6 +399,7 @@ struct legacy_pic null_legacy_pic = { .mask_all = legacy_pic_noop, .restore_mask = legacy_pic_noop, .init = legacy_pic_int_noop, + .probe = legacy_pic_probe, .irq_pending = legacy_pic_irq_pending_noop, .make_irq = legacy_pic_uint_noop, }; @@ -400,6 +412,7 @@ struct legacy_pic default_legacy_pic = { .mask_all = mask_8259A, .restore_mask = unmask_8259A, .init = init_8259A, + .probe = probe_8259A, .irq_pending = i8259A_irq_pending, .make_irq = make_8259A_irq, }; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index a1e4da98c8f0..29db25f9a745 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -1188,7 +1188,7 @@ void __init setup_arch(char **cmdline_p) */ clone_pgd_range(initial_page_table, swapper_pg_dir + KERNEL_PGD_BOUNDARY, - KERNEL_PGD_PTRS); + min(KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY)); #endif tboot_probe(); diff --git a/arch/x86/kernel/verify_cpu.S b/arch/x86/kernel/verify_cpu.S index b9242bacbe59..4cf401f581e7 100644 --- a/arch/x86/kernel/verify_cpu.S +++ b/arch/x86/kernel/verify_cpu.S @@ -34,10 +34,11 @@ #include <asm/msr-index.h> verify_cpu: - pushfl # Save caller passed flags - pushl $0 # Kill any dangerous flags - popfl + pushf # Save caller passed flags + push $0 # Kill any dangerous flags + popf +#ifndef __x86_64__ pushfl # standard way to check for cpuid popl %eax movl %eax,%ebx @@ -48,6 +49,7 @@ verify_cpu: popl %eax cmpl %eax,%ebx jz verify_cpu_no_longmode # cpu has no cpuid +#endif movl $0x0,%eax # See if cpuid 1 is implemented cpuid @@ -130,10 +132,10 @@ verify_cpu_sse_test: jmp verify_cpu_sse_test # try again verify_cpu_no_longmode: - popfl # Restore caller passed flags + popf # Restore caller passed flags movl $1,%eax ret verify_cpu_sse_ok: - popfl # Restore caller passed flags + popf # Restore caller passed flags xorl %eax, %eax ret diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index ecd4ea1d28a8..4d30b865be30 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -1250,7 +1250,7 @@ void wait_lapic_expire(struct kvm_vcpu *vcpu) tsc_deadline = apic->lapic_timer.expired_tscdeadline; apic->lapic_timer.expired_tscdeadline = 0; - guest_tsc = kvm_x86_ops->read_l1_tsc(vcpu, rdtsc()); + guest_tsc = kvm_read_l1_tsc(vcpu, rdtsc()); trace_kvm_wait_lapic_expire(vcpu->vcpu_id, guest_tsc - tsc_deadline); /* __delay is delay_tsc whenever the hardware has TSC, thus always. */ @@ -1318,7 +1318,7 @@ static void start_apic_timer(struct kvm_lapic *apic) local_irq_save(flags); now = apic->lapic_timer.timer.base->get_time(); - guest_tsc = kvm_x86_ops->read_l1_tsc(vcpu, rdtsc()); + guest_tsc = kvm_read_l1_tsc(vcpu, rdtsc()); if (likely(tscdeadline > guest_tsc)) { ns = (tscdeadline - guest_tsc) * 1000000ULL; do_div(ns, this_tsc_khz); diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 7d85bcae3332..e7c2c1428a69 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -3359,7 +3359,7 @@ exit: return reserved; } -int handle_mmio_page_fault_common(struct kvm_vcpu *vcpu, u64 addr, bool direct) +int handle_mmio_page_fault(struct kvm_vcpu *vcpu, u64 addr, bool direct) { u64 spte; bool reserved; @@ -3368,7 +3368,7 @@ int handle_mmio_page_fault_common(struct kvm_vcpu *vcpu, u64 addr, bool direct) return RET_MMIO_PF_EMULATE; reserved = walk_shadow_page_get_mmio_spte(vcpu, addr, &spte); - if (unlikely(reserved)) + if (WARN_ON(reserved)) return RET_MMIO_PF_BUG; if (is_mmio_spte(spte)) { @@ -3392,17 +3392,7 @@ int handle_mmio_page_fault_common(struct kvm_vcpu *vcpu, u64 addr, bool direct) */ return RET_MMIO_PF_RETRY; } -EXPORT_SYMBOL_GPL(handle_mmio_page_fault_common); - -static int handle_mmio_page_fault(struct kvm_vcpu *vcpu, u64 addr, - u32 error_code, bool direct) -{ - int ret; - - ret = handle_mmio_page_fault_common(vcpu, addr, direct); - WARN_ON(ret == RET_MMIO_PF_BUG); - return ret; -} +EXPORT_SYMBOL_GPL(handle_mmio_page_fault); static int nonpaging_page_fault(struct kvm_vcpu *vcpu, gva_t gva, u32 error_code, bool prefault) @@ -3413,7 +3403,7 @@ static int nonpaging_page_fault(struct kvm_vcpu *vcpu, gva_t gva, pgprintk("%s: gva %lx error %x\n", __func__, gva, error_code); if (unlikely(error_code & PFERR_RSVD_MASK)) { - r = handle_mmio_page_fault(vcpu, gva, error_code, true); + r = handle_mmio_page_fault(vcpu, gva, true); if (likely(r != RET_MMIO_PF_INVALID)) return r; @@ -3503,7 +3493,7 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa, u32 error_code, MMU_WARN_ON(!VALID_PAGE(vcpu->arch.mmu.root_hpa)); if (unlikely(error_code & PFERR_RSVD_MASK)) { - r = handle_mmio_page_fault(vcpu, gpa, error_code, true); + r = handle_mmio_page_fault(vcpu, gpa, true); if (likely(r != RET_MMIO_PF_INVALID)) return r; diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h index e4202e41d535..55ffb7b0f95e 100644 --- a/arch/x86/kvm/mmu.h +++ b/arch/x86/kvm/mmu.h @@ -56,13 +56,13 @@ void reset_shadow_zero_bits_mask(struct kvm_vcpu *vcpu, struct kvm_mmu *context); /* - * Return values of handle_mmio_page_fault_common: + * Return values of handle_mmio_page_fault: * RET_MMIO_PF_EMULATE: it is a real mmio page fault, emulate the instruction * directly. * RET_MMIO_PF_INVALID: invalid spte is detected then let the real page * fault path update the mmio spte. * RET_MMIO_PF_RETRY: let CPU fault again on the address. - * RET_MMIO_PF_BUG: bug is detected. + * RET_MMIO_PF_BUG: a bug was detected (and a WARN was printed). */ enum { RET_MMIO_PF_EMULATE = 1, @@ -71,7 +71,7 @@ enum { RET_MMIO_PF_BUG = -1 }; -int handle_mmio_page_fault_common(struct kvm_vcpu *vcpu, u64 addr, bool direct); +int handle_mmio_page_fault(struct kvm_vcpu *vcpu, u64 addr, bool direct); void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu); void kvm_init_shadow_ept_mmu(struct kvm_vcpu *vcpu, bool execonly); diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index b41faa91a6f9..3058a22a658d 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -705,8 +705,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, u32 error_code, pgprintk("%s: addr %lx err %x\n", __func__, addr, error_code); if (unlikely(error_code & PFERR_RSVD_MASK)) { - r = handle_mmio_page_fault(vcpu, addr, error_code, - mmu_is_nested(vcpu)); + r = handle_mmio_page_fault(vcpu, addr, mmu_is_nested(vcpu)); if (likely(r != RET_MMIO_PF_INVALID)) return r; diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index f2c8e4917688..83a1c643f9a5 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -158,8 +158,6 @@ struct vcpu_svm { unsigned long int3_rip; u32 apf_reason; - u64 tsc_ratio; - /* cached guest cpuid flags for faster access */ bool nrips_enabled : 1; }; @@ -214,7 +212,6 @@ static int nested_svm_intercept(struct vcpu_svm *svm); static int nested_svm_vmexit(struct vcpu_svm *svm); static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr, bool has_error_code, u32 error_code); -static u64 __scale_tsc(u64 ratio, u64 tsc); enum { VMCB_INTERCEPTS, /* Intercept vectors, TSC offset, @@ -894,20 +891,9 @@ static __init int svm_hardware_setup(void) kvm_enable_efer_bits(EFER_FFXSR); if (boot_cpu_has(X86_FEATURE_TSCRATEMSR)) { - u64 max; - kvm_has_tsc_control = true; - - /* - * Make sure the user can only configure tsc_khz values that - * fit into a signed integer. - * A min value is not calculated needed because it will always - * be 1 on all machines and a value of 0 is used to disable - * tsc-scaling for the vcpu. - */ - max = min(0x7fffffffULL, __scale_tsc(tsc_khz, TSC_RATIO_MAX)); - - kvm_max_guest_tsc_khz = max; + kvm_max_tsc_scaling_ratio = TSC_RATIO_MAX; + kvm_tsc_scaling_ratio_frac_bits = 32; } if (nested) { @@ -971,68 +957,6 @@ static void init_sys_seg(struct vmcb_seg *seg, uint32_t type) seg->base = 0; } -static u64 __scale_tsc(u64 ratio, u64 tsc) -{ - u64 mult, frac, _tsc; - - mult = ratio >> 32; - frac = ratio & ((1ULL << 32) - 1); - - _tsc = tsc; - _tsc *= mult; - _tsc += (tsc >> 32) * frac; - _tsc += ((tsc & ((1ULL << 32) - 1)) * frac) >> 32; - - return _tsc; -} - -static u64 svm_scale_tsc(struct kvm_vcpu *vcpu, u64 tsc) -{ - struct vcpu_svm *svm = to_svm(vcpu); - u64 _tsc = tsc; - - if (svm->tsc_ratio != TSC_RATIO_DEFAULT) - _tsc = __scale_tsc(svm->tsc_ratio, tsc); - - return _tsc; -} - -static void svm_set_tsc_khz(struct kvm_vcpu *vcpu, u32 user_tsc_khz, bool scale) -{ - struct vcpu_svm *svm = to_svm(vcpu); - u64 ratio; - u64 khz; - - /* Guest TSC same frequency as host TSC? */ - if (!scale) { - svm->tsc_ratio = TSC_RATIO_DEFAULT; - return; - } - - /* TSC scaling supported? */ - if (!boot_cpu_has(X86_FEATURE_TSCRATEMSR)) { - if (user_tsc_khz > tsc_khz) { - vcpu->arch.tsc_catchup = 1; - vcpu->arch.tsc_always_catchup = 1; - } else - WARN(1, "user requested TSC rate below hardware speed\n"); - return; - } - - khz = user_tsc_khz; - - /* TSC scaling required - calculate ratio */ - ratio = khz << 32; - do_div(ratio, tsc_khz); - - if (ratio == 0 || ratio & TSC_RATIO_RSVD) { - WARN_ONCE(1, "Invalid TSC ratio - virtual-tsc-khz=%u\n", - user_tsc_khz); - return; - } - svm->tsc_ratio = ratio; -} - static u64 svm_read_tsc_offset(struct kvm_vcpu *vcpu) { struct vcpu_svm *svm = to_svm(vcpu); @@ -1059,16 +983,10 @@ static void svm_write_tsc_offset(struct kvm_vcpu *vcpu, u64 offset) mark_dirty(svm->vmcb, VMCB_INTERCEPTS); } -static void svm_adjust_tsc_offset(struct kvm_vcpu *vcpu, s64 adjustment, bool host) +static void svm_adjust_tsc_offset_guest(struct kvm_vcpu *vcpu, s64 adjustment) { struct vcpu_svm *svm = to_svm(vcpu); - if (host) { - if (svm->tsc_ratio != TSC_RATIO_DEFAULT) - WARN_ON(adjustment < 0); - adjustment = svm_scale_tsc(vcpu, (u64)adjustment); - } - svm->vmcb->control.tsc_offset += adjustment; if (is_guest_mode(vcpu)) svm->nested.hsave->control.tsc_offset += adjustment; @@ -1080,15 +998,6 @@ static void svm_adjust_tsc_offset(struct kvm_vcpu *vcpu, s64 adjustment, bool ho mark_dirty(svm->vmcb, VMCB_INTERCEPTS); } -static u64 svm_compute_tsc_offset(struct kvm_vcpu *vcpu, u64 target_tsc) -{ - u64 tsc; - - tsc = svm_scale_tsc(vcpu, rdtsc()); - - return target_tsc - tsc; -} - static void init_vmcb(struct vcpu_svm *svm) { struct vmcb_control_area *control = &svm->vmcb->control; @@ -1110,6 +1019,8 @@ static void init_vmcb(struct vcpu_svm *svm) set_exception_intercept(svm, PF_VECTOR); set_exception_intercept(svm, UD_VECTOR); set_exception_intercept(svm, MC_VECTOR); + set_exception_intercept(svm, AC_VECTOR); + set_exception_intercept(svm, DB_VECTOR); set_intercept(svm, INTERCEPT_INTR); set_intercept(svm, INTERCEPT_NMI); @@ -1235,8 +1146,6 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id) goto out; } - svm->tsc_ratio = TSC_RATIO_DEFAULT; - err = kvm_vcpu_init(&svm->vcpu, kvm, id); if (err) goto free_svm; @@ -1322,10 +1231,12 @@ static void svm_vcpu_load(struct kvm_vcpu *vcpu, int cpu) for (i = 0; i < NR_HOST_SAVE_USER_MSRS; i++) rdmsrl(host_save_user_msrs[i], svm->host_user_msrs[i]); - if (static_cpu_has(X86_FEATURE_TSCRATEMSR) && - svm->tsc_ratio != __this_cpu_read(current_tsc_ratio)) { - __this_cpu_write(current_tsc_ratio, svm->tsc_ratio); - wrmsrl(MSR_AMD64_TSC_RATIO, svm->tsc_ratio); + if (static_cpu_has(X86_FEATURE_TSCRATEMSR)) { + u64 tsc_ratio = vcpu->arch.tsc_scaling_ratio; + if (tsc_ratio != __this_cpu_read(current_tsc_ratio)) { + __this_cpu_write(current_tsc_ratio, tsc_ratio); + wrmsrl(MSR_AMD64_TSC_RATIO, tsc_ratio); + } } } @@ -1644,20 +1555,13 @@ static void svm_set_segment(struct kvm_vcpu *vcpu, mark_dirty(svm->vmcb, VMCB_SEG); } -static void update_db_bp_intercept(struct kvm_vcpu *vcpu) +static void update_bp_intercept(struct kvm_vcpu *vcpu) { struct vcpu_svm *svm = to_svm(vcpu); - clr_exception_intercept(svm, DB_VECTOR); clr_exception_intercept(svm, BP_VECTOR); - if (svm->nmi_singlestep) - set_exception_intercept(svm, DB_VECTOR); - if (vcpu->guest_debug & KVM_GUESTDBG_ENABLE) { - if (vcpu->guest_debug & - (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP)) - set_exception_intercept(svm, DB_VECTOR); if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP) set_exception_intercept(svm, BP_VECTOR); } else @@ -1763,7 +1667,6 @@ static int db_interception(struct vcpu_svm *svm) if (!(svm->vcpu.guest_debug & KVM_GUESTDBG_SINGLESTEP)) svm->vmcb->save.rflags &= ~(X86_EFLAGS_TF | X86_EFLAGS_RF); - update_db_bp_intercept(&svm->vcpu); } if (svm->vcpu.guest_debug & @@ -1798,6 +1701,12 @@ static int ud_interception(struct vcpu_svm *svm) return 1; } +static int ac_interception(struct vcpu_svm *svm) +{ + kvm_queue_exception_e(&svm->vcpu, AC_VECTOR, 0); + return 1; +} + static void svm_fpu_activate(struct kvm_vcpu *vcpu) { struct vcpu_svm *svm = to_svm(vcpu); @@ -3075,8 +2984,7 @@ static int cr8_write_interception(struct vcpu_svm *svm) static u64 svm_read_l1_tsc(struct kvm_vcpu *vcpu, u64 host_tsc) { struct vmcb *vmcb = get_host_vmcb(to_svm(vcpu)); - return vmcb->control.tsc_offset + - svm_scale_tsc(vcpu, host_tsc); + return vmcb->control.tsc_offset + host_tsc; } static int svm_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) @@ -3086,7 +2994,7 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) switch (msr_info->index) { case MSR_IA32_TSC: { msr_info->data = svm->vmcb->control.tsc_offset + - svm_scale_tsc(vcpu, rdtsc()); + kvm_scale_tsc(vcpu, rdtsc()); break; } @@ -3362,6 +3270,7 @@ static int (*const svm_exit_handlers[])(struct vcpu_svm *svm) = { [SVM_EXIT_EXCP_BASE + PF_VECTOR] = pf_interception, [SVM_EXIT_EXCP_BASE + NM_VECTOR] = nm_interception, [SVM_EXIT_EXCP_BASE + MC_VECTOR] = mc_interception, + [SVM_EXIT_EXCP_BASE + AC_VECTOR] = ac_interception, [SVM_EXIT_INTR] = intr_interception, [SVM_EXIT_NMI] = nmi_interception, [SVM_EXIT_SMI] = nop_on_interception, @@ -3745,7 +3654,6 @@ static void enable_nmi_window(struct kvm_vcpu *vcpu) */ svm->nmi_singlestep = true; svm->vmcb->save.rflags |= (X86_EFLAGS_TF | X86_EFLAGS_RF); - update_db_bp_intercept(vcpu); } static int svm_set_tss_addr(struct kvm *kvm, unsigned int addr) @@ -4371,7 +4279,7 @@ static struct kvm_x86_ops svm_x86_ops = { .vcpu_load = svm_vcpu_load, .vcpu_put = svm_vcpu_put, - .update_db_bp_intercept = update_db_bp_intercept, + .update_bp_intercept = update_bp_intercept, .get_msr = svm_get_msr, .set_msr = svm_set_msr, .get_segment_base = svm_get_segment_base, @@ -4443,11 +4351,9 @@ static struct kvm_x86_ops svm_x86_ops = { .has_wbinvd_exit = svm_has_wbinvd_exit, - .set_tsc_khz = svm_set_tsc_khz, .read_tsc_offset = svm_read_tsc_offset, .write_tsc_offset = svm_write_tsc_offset, - .adjust_tsc_offset = svm_adjust_tsc_offset, - .compute_tsc_offset = svm_compute_tsc_offset, + .adjust_tsc_offset_guest = svm_adjust_tsc_offset_guest, .read_l1_tsc = svm_read_l1_tsc, .set_tdp_cr3 = set_tdp_cr3, diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 5eb56ed77c1f..87acc5221740 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -107,6 +107,8 @@ static u64 __read_mostly host_xss; static bool __read_mostly enable_pml = 1; module_param_named(pml, enable_pml, bool, S_IRUGO); +#define KVM_VMX_TSC_MULTIPLIER_MAX 0xffffffffffffffffULL + #define KVM_GUEST_CR0_MASK (X86_CR0_NW | X86_CR0_CD) #define KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST (X86_CR0_WP | X86_CR0_NE) #define KVM_VM_CR0_ALWAYS_ON \ @@ -1172,6 +1174,12 @@ static inline bool cpu_has_vmx_pml(void) return vmcs_config.cpu_based_2nd_exec_ctrl & SECONDARY_EXEC_ENABLE_PML; } +static inline bool cpu_has_vmx_tsc_scaling(void) +{ + return vmcs_config.cpu_based_2nd_exec_ctrl & + SECONDARY_EXEC_TSC_SCALING; +} + static inline bool report_flexpriority(void) { return flexpriority_enabled; @@ -1631,7 +1639,7 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu) u32 eb; eb = (1u << PF_VECTOR) | (1u << UD_VECTOR) | (1u << MC_VECTOR) | - (1u << NM_VECTOR) | (1u << DB_VECTOR); + (1u << NM_VECTOR) | (1u << DB_VECTOR) | (1u << AC_VECTOR); if ((vcpu->guest_debug & (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP)) == (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP)) @@ -2053,6 +2061,12 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu) rdmsrl(MSR_IA32_SYSENTER_ESP, sysenter_esp); vmcs_writel(HOST_IA32_SYSENTER_ESP, sysenter_esp); /* 22.2.3 */ + + /* Setup TSC multiplier */ + if (cpu_has_vmx_tsc_scaling()) + vmcs_write64(TSC_MULTIPLIER, + vcpu->arch.tsc_scaling_ratio); + vmx->loaded_vmcs->cpu = cpu; } @@ -2357,15 +2371,16 @@ static void setup_msrs(struct vcpu_vmx *vmx) /* * reads and returns guest's timestamp counter "register" - * guest_tsc = host_tsc + tsc_offset -- 21.3 + * guest_tsc = (host_tsc * tsc multiplier) >> 48 + tsc_offset + * -- Intel TSC Scaling for Virtualization White Paper, sec 1.3 */ -static u64 guest_read_tsc(void) +static u64 guest_read_tsc(struct kvm_vcpu *vcpu) { u64 host_tsc, tsc_offset; host_tsc = rdtsc(); tsc_offset = vmcs_read64(TSC_OFFSET); - return host_tsc + tsc_offset; + return kvm_scale_tsc(vcpu, host_tsc) + tsc_offset; } /* @@ -2382,22 +2397,6 @@ static u64 vmx_read_l1_tsc(struct kvm_vcpu *vcpu, u64 host_tsc) return host_tsc + tsc_offset; } -/* - * Engage any workarounds for mis-matched TSC rates. Currently limited to - * software catchup for faster rates on slower CPUs. - */ -static void vmx_set_tsc_khz(struct kvm_vcpu *vcpu, u32 user_tsc_khz, bool scale) -{ - if (!scale) - return; - - if (user_tsc_khz > tsc_khz) { - vcpu->arch.tsc_catchup = 1; - vcpu->arch.tsc_always_catchup = 1; - } else - WARN(1, "user requested TSC rate below hardware speed\n"); -} - static u64 vmx_read_tsc_offset(struct kvm_vcpu *vcpu) { return vmcs_read64(TSC_OFFSET); @@ -2429,7 +2428,7 @@ static void vmx_write_tsc_offset(struct kvm_vcpu *vcpu, u64 offset) } } -static void vmx_adjust_tsc_offset(struct kvm_vcpu *vcpu, s64 adjustment, bool host) +static void vmx_adjust_tsc_offset_guest(struct kvm_vcpu *vcpu, s64 adjustment) { u64 offset = vmcs_read64(TSC_OFFSET); @@ -2442,11 +2441,6 @@ static void vmx_adjust_tsc_offset(struct kvm_vcpu *vcpu, s64 adjustment, bool ho offset + adjustment); } -static u64 vmx_compute_tsc_offset(struct kvm_vcpu *vcpu, u64 target_tsc) -{ - return target_tsc - rdtsc(); -} - static bool guest_cpuid_has_vmx(struct kvm_vcpu *vcpu) { struct kvm_cpuid_entry2 *best = kvm_find_cpuid_entry(vcpu, 1, 0); @@ -2778,7 +2772,7 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) case MSR_EFER: return kvm_get_msr_common(vcpu, msr_info); case MSR_IA32_TSC: - msr_info->data = guest_read_tsc(); + msr_info->data = guest_read_tsc(vcpu); break; case MSR_IA32_SYSENTER_CS: msr_info->data = vmcs_read32(GUEST_SYSENTER_CS); @@ -3154,7 +3148,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf) SECONDARY_EXEC_SHADOW_VMCS | SECONDARY_EXEC_XSAVES | SECONDARY_EXEC_ENABLE_PML | - SECONDARY_EXEC_PCOMMIT; + SECONDARY_EXEC_PCOMMIT | + SECONDARY_EXEC_TSC_SCALING; if (adjust_vmx_controls(min2, opt2, MSR_IA32_VMX_PROCBASED_CTLS2, &_cpu_based_2nd_exec_control) < 0) @@ -5266,6 +5261,9 @@ static int handle_exception(struct kvm_vcpu *vcpu) return handle_rmode_exception(vcpu, ex_no, error_code); switch (ex_no) { + case AC_VECTOR: + kvm_queue_exception_e(vcpu, AC_VECTOR, error_code); + return 1; case DB_VECTOR: dr6 = vmcs_readl(EXIT_QUALIFICATION); if (!(vcpu->guest_debug & @@ -5908,7 +5906,7 @@ static int handle_ept_misconfig(struct kvm_vcpu *vcpu) return 1; } - ret = handle_mmio_page_fault_common(vcpu, gpa, true); + ret = handle_mmio_page_fault(vcpu, gpa, true); if (likely(ret == RET_MMIO_PF_EMULATE)) return x86_emulate_instruction(vcpu, gpa, 0, NULL, 0) == EMULATE_DONE; @@ -6199,6 +6197,12 @@ static __init int hardware_setup(void) if (!cpu_has_vmx_apicv()) enable_apicv = 0; + if (cpu_has_vmx_tsc_scaling()) { + kvm_has_tsc_control = true; + kvm_max_tsc_scaling_ratio = KVM_VMX_TSC_MULTIPLIER_MAX; + kvm_tsc_scaling_ratio_frac_bits = 48; + } + if (enable_apicv) kvm_x86_ops->update_cr8_intercept = NULL; else { @@ -8008,6 +8012,9 @@ static void dump_vmcs(void) vmcs_read32(IDT_VECTORING_INFO_FIELD), vmcs_read32(IDT_VECTORING_ERROR_CODE)); pr_err("TSC Offset = 0x%016lx\n", vmcs_readl(TSC_OFFSET)); + if (secondary_exec_control & SECONDARY_EXEC_TSC_SCALING) + pr_err("TSC Multiplier = 0x%016lx\n", + vmcs_readl(TSC_MULTIPLIER)); if (cpu_based_exec_ctrl & CPU_BASED_TPR_SHADOW) pr_err("TPR Threshold = 0x%02x\n", vmcs_read32(TPR_THRESHOLD)); if (pin_based_exec_ctrl & PIN_BASED_POSTED_INTR) @@ -10752,7 +10759,7 @@ static struct kvm_x86_ops vmx_x86_ops = { .vcpu_load = vmx_vcpu_load, .vcpu_put = vmx_vcpu_put, - .update_db_bp_intercept = update_exception_bitmap, + .update_bp_intercept = update_exception_bitmap, .get_msr = vmx_get_msr, .set_msr = vmx_set_msr, .get_segment_base = vmx_get_segment_base, @@ -10826,11 +10833,9 @@ static struct kvm_x86_ops vmx_x86_ops = { .has_wbinvd_exit = cpu_has_vmx_wbinvd_exit, - .set_tsc_khz = vmx_set_tsc_khz, .read_tsc_offset = vmx_read_tsc_offset, .write_tsc_offset = vmx_write_tsc_offset, - .adjust_tsc_offset = vmx_adjust_tsc_offset, - .compute_tsc_offset = vmx_compute_tsc_offset, + .adjust_tsc_offset_guest = vmx_adjust_tsc_offset_guest, .read_l1_tsc = vmx_read_l1_tsc, .set_tdp_cr3 = vmx_set_cr3, diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 4a6eff166fc6..00462bd63129 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -93,10 +93,10 @@ static void update_cr8_intercept(struct kvm_vcpu *vcpu); static void process_nmi(struct kvm_vcpu *vcpu); static void __kvm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags); -struct kvm_x86_ops *kvm_x86_ops; +struct kvm_x86_ops *kvm_x86_ops __read_mostly; EXPORT_SYMBOL_GPL(kvm_x86_ops); -static bool ignore_msrs = 0; +static bool __read_mostly ignore_msrs = 0; module_param(ignore_msrs, bool, S_IRUGO | S_IWUSR); unsigned int min_timer_period_us = 500; @@ -105,20 +105,25 @@ module_param(min_timer_period_us, uint, S_IRUGO | S_IWUSR); static bool __read_mostly kvmclock_periodic_sync = true; module_param(kvmclock_periodic_sync, bool, S_IRUGO); -bool kvm_has_tsc_control; +bool __read_mostly kvm_has_tsc_control; EXPORT_SYMBOL_GPL(kvm_has_tsc_control); -u32 kvm_max_guest_tsc_khz; +u32 __read_mostly kvm_max_guest_tsc_khz; EXPORT_SYMBOL_GPL(kvm_max_guest_tsc_khz); +u8 __read_mostly kvm_tsc_scaling_ratio_frac_bits; +EXPORT_SYMBOL_GPL(kvm_tsc_scaling_ratio_frac_bits); +u64 __read_mostly kvm_max_tsc_scaling_ratio; +EXPORT_SYMBOL_GPL(kvm_max_tsc_scaling_ratio); +static u64 __read_mostly kvm_default_tsc_scaling_ratio; /* tsc tolerance in parts per million - default to 1/2 of the NTP threshold */ -static u32 tsc_tolerance_ppm = 250; +static u32 __read_mostly tsc_tolerance_ppm = 250; module_param(tsc_tolerance_ppm, uint, S_IRUGO | S_IWUSR); /* lapic timer advance (tscdeadline mode only) in nanoseconds */ -unsigned int lapic_timer_advance_ns = 0; +unsigned int __read_mostly lapic_timer_advance_ns = 0; module_param(lapic_timer_advance_ns, uint, S_IRUGO | S_IWUSR); -static bool backwards_tsc_observed = false; +static bool __read_mostly backwards_tsc_observed = false; #define KVM_NR_SHARED_MSRS 16 @@ -1249,14 +1254,53 @@ static u32 adjust_tsc_khz(u32 khz, s32 ppm) return v; } -static void kvm_set_tsc_khz(struct kvm_vcpu *vcpu, u32 this_tsc_khz) +static int set_tsc_khz(struct kvm_vcpu *vcpu, u32 user_tsc_khz, bool scale) +{ + u64 ratio; + + /* Guest TSC same frequency as host TSC? */ + if (!scale) { + vcpu->arch.tsc_scaling_ratio = kvm_default_tsc_scaling_ratio; + return 0; + } + + /* TSC scaling supported? */ + if (!kvm_has_tsc_control) { + if (user_tsc_khz > tsc_khz) { + vcpu->arch.tsc_catchup = 1; + vcpu->arch.tsc_always_catchup = 1; + return 0; + } else { + WARN(1, "user requested TSC rate below hardware speed\n"); + return -1; + } + } + + /* TSC scaling required - calculate ratio */ + ratio = mul_u64_u32_div(1ULL << kvm_tsc_scaling_ratio_frac_bits, + user_tsc_khz, tsc_khz); + + if (ratio == 0 || ratio >= kvm_max_tsc_scaling_ratio) { + WARN_ONCE(1, "Invalid TSC scaling ratio - virtual-tsc-khz=%u\n", + user_tsc_khz); + return -1; + } + + vcpu->arch.tsc_scaling_ratio = ratio; + return 0; +} + +static int kvm_set_tsc_khz(struct kvm_vcpu *vcpu, u32 this_tsc_khz) { u32 thresh_lo, thresh_hi; int use_scaling = 0; /* tsc_khz can be zero if TSC calibration fails */ - if (this_tsc_khz == 0) - return; + if (this_tsc_khz == 0) { + /* set tsc_scaling_ratio to a safe value */ + vcpu->arch.tsc_scaling_ratio = kvm_default_tsc_scaling_ratio; + return -1; + } /* Compute a scale to convert nanoseconds in TSC cycles */ kvm_get_time_scale(this_tsc_khz, NSEC_PER_SEC / 1000, @@ -1276,7 +1320,7 @@ static void kvm_set_tsc_khz(struct kvm_vcpu *vcpu, u32 this_tsc_khz) pr_debug("kvm: requested TSC rate %u falls outside tolerance [%u,%u]\n", this_tsc_khz, thresh_lo, thresh_hi); use_scaling = 1; } - kvm_x86_ops->set_tsc_khz(vcpu, this_tsc_khz, use_scaling); + return set_tsc_khz(vcpu, this_tsc_khz, use_scaling); } static u64 compute_guest_tsc(struct kvm_vcpu *vcpu, s64 kernel_ns) @@ -1322,6 +1366,48 @@ static void update_ia32_tsc_adjust_msr(struct kvm_vcpu *vcpu, s64 offset) vcpu->arch.ia32_tsc_adjust_msr += offset - curr_offset; } +/* + * Multiply tsc by a fixed point number represented by ratio. + * + * The most significant 64-N bits (mult) of ratio represent the + * integral part of the fixed point number; the remaining N bits + * (frac) represent the fractional part, ie. ratio represents a fixed + * point number (mult + frac * 2^(-N)). + * + * N equals to kvm_tsc_scaling_ratio_frac_bits. + */ +static inline u64 __scale_tsc(u64 ratio, u64 tsc) +{ + return mul_u64_u64_shr(tsc, ratio, kvm_tsc_scaling_ratio_frac_bits); +} + +u64 kvm_scale_tsc(struct kvm_vcpu *vcpu, u64 tsc) +{ + u64 _tsc = tsc; + u64 ratio = vcpu->arch.tsc_scaling_ratio; + + if (ratio != kvm_default_tsc_scaling_ratio) + _tsc = __scale_tsc(ratio, tsc); + + return _tsc; +} +EXPORT_SYMBOL_GPL(kvm_scale_tsc); + +static u64 kvm_compute_tsc_offset(struct kvm_vcpu *vcpu, u64 target_tsc) +{ + u64 tsc; + + tsc = kvm_scale_tsc(vcpu, rdtsc()); + + return target_tsc - tsc; +} + +u64 kvm_read_l1_tsc(struct kvm_vcpu *vcpu, u64 host_tsc) +{ + return kvm_x86_ops->read_l1_tsc(vcpu, kvm_scale_tsc(vcpu, host_tsc)); +} +EXPORT_SYMBOL_GPL(kvm_read_l1_tsc); + void kvm_write_tsc(struct kvm_vcpu *vcpu, struct msr_data *msr) { struct kvm *kvm = vcpu->kvm; @@ -1333,7 +1419,7 @@ void kvm_write_tsc(struct kvm_vcpu *vcpu, struct msr_data *msr) u64 data = msr->data; raw_spin_lock_irqsave(&kvm->arch.tsc_write_lock, flags); - offset = kvm_x86_ops->compute_tsc_offset(vcpu, data); + offset = kvm_compute_tsc_offset(vcpu, data); ns = get_kernel_ns(); elapsed = ns - kvm->arch.last_tsc_nsec; @@ -1390,7 +1476,7 @@ void kvm_write_tsc(struct kvm_vcpu *vcpu, struct msr_data *msr) } else { u64 delta = nsec_to_cycles(vcpu, elapsed); data += delta; - offset = kvm_x86_ops->compute_tsc_offset(vcpu, data); + offset = kvm_compute_tsc_offset(vcpu, data); pr_debug("kvm: adjusted tsc offset by %llu\n", delta); } matched = true; @@ -1447,6 +1533,20 @@ void kvm_write_tsc(struct kvm_vcpu *vcpu, struct msr_data *msr) EXPORT_SYMBOL_GPL(kvm_write_tsc); +static inline void adjust_tsc_offset_guest(struct kvm_vcpu *vcpu, + s64 adjustment) +{ + kvm_x86_ops->adjust_tsc_offset_guest(vcpu, adjustment); +} + +static inline void adjust_tsc_offset_host(struct kvm_vcpu *vcpu, s64 adjustment) +{ + if (vcpu->arch.tsc_scaling_ratio != kvm_default_tsc_scaling_ratio) + WARN_ON(adjustment < 0); + adjustment = kvm_scale_tsc(vcpu, (u64) adjustment); + kvm_x86_ops->adjust_tsc_offset_guest(vcpu, adjustment); +} + #ifdef CONFIG_X86_64 static cycle_t read_tsc(void) @@ -1608,7 +1708,7 @@ static void kvm_gen_update_masterclock(struct kvm *kvm) static int kvm_guest_time_update(struct kvm_vcpu *v) { - unsigned long flags, this_tsc_khz; + unsigned long flags, this_tsc_khz, tgt_tsc_khz; struct kvm_vcpu_arch *vcpu = &v->arch; struct kvm_arch *ka = &v->kvm->arch; s64 kernel_ns; @@ -1645,7 +1745,7 @@ static int kvm_guest_time_update(struct kvm_vcpu *v) kernel_ns = get_kernel_ns(); } - tsc_timestamp = kvm_x86_ops->read_l1_tsc(v, host_tsc); + tsc_timestamp = kvm_read_l1_tsc(v, host_tsc); /* * We may have to catch up the TSC to match elapsed wall clock @@ -1671,7 +1771,9 @@ static int kvm_guest_time_update(struct kvm_vcpu *v) return 0; if (unlikely(vcpu->hw_tsc_khz != this_tsc_khz)) { - kvm_get_time_scale(NSEC_PER_SEC / 1000, this_tsc_khz, + tgt_tsc_khz = kvm_has_tsc_control ? + vcpu->virtual_tsc_khz : this_tsc_khz; + kvm_get_time_scale(NSEC_PER_SEC / 1000, tgt_tsc_khz, &vcpu->hv_clock.tsc_shift, &vcpu->hv_clock.tsc_to_system_mul); vcpu->hw_tsc_khz = this_tsc_khz; @@ -2617,7 +2719,7 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) if (tsc_delta < 0) mark_tsc_unstable("KVM discovered backwards TSC"); if (check_tsc_unstable()) { - u64 offset = kvm_x86_ops->compute_tsc_offset(vcpu, + u64 offset = kvm_compute_tsc_offset(vcpu, vcpu->arch.last_guest_tsc); kvm_x86_ops->write_tsc_offset(vcpu, offset); vcpu->arch.tsc_catchup = 1; @@ -3319,9 +3421,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp, if (user_tsc_khz == 0) user_tsc_khz = tsc_khz; - kvm_set_tsc_khz(vcpu, user_tsc_khz); + if (!kvm_set_tsc_khz(vcpu, user_tsc_khz)) + r = 0; - r = 0; goto out; } case KVM_GET_TSC_KHZ: { @@ -6452,8 +6554,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu) if (hw_breakpoint_active()) hw_breakpoint_restore(); - vcpu->arch.last_guest_tsc = kvm_x86_ops->read_l1_tsc(vcpu, - rdtsc()); + vcpu->arch.last_guest_tsc = kvm_read_l1_tsc(vcpu, rdtsc()); vcpu->mode = OUTSIDE_GUEST_MODE; smp_wmb(); @@ -7015,7 +7116,7 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu, */ kvm_set_rflags(vcpu, rflags); - kvm_x86_ops->update_db_bp_intercept(vcpu); + kvm_x86_ops->update_bp_intercept(vcpu); r = 0; @@ -7364,6 +7465,20 @@ int kvm_arch_hardware_setup(void) if (r != 0) return r; + if (kvm_has_tsc_control) { + /* + * Make sure the user can only configure tsc_khz values that + * fit into a signed integer. + * A min value is not calculated needed because it will always + * be 1 on all machines. + */ + u64 max = min(0x7fffffffULL, + __scale_tsc(kvm_max_tsc_scaling_ratio, tsc_khz)); + kvm_max_guest_tsc_khz = max; + + kvm_default_tsc_scaling_ratio = 1ULL << kvm_tsc_scaling_ratio_frac_bits; + } + kvm_init_msr_list(); return 0; } diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c index 1bf417e9cc13..a035c2aa7801 100644 --- a/arch/x86/mm/dump_pagetables.c +++ b/arch/x86/mm/dump_pagetables.c @@ -358,6 +358,21 @@ static void walk_pud_level(struct seq_file *m, struct pg_state *st, pgd_t addr, #define pgd_none(a) pud_none(__pud(pgd_val(a))) #endif +#ifdef CONFIG_X86_64 +static inline bool is_hypervisor_range(int idx) +{ + /* + * ffff800000000000 - ffff87ffffffffff is reserved for + * the hypervisor. + */ + return paravirt_enabled() && + (idx >= pgd_index(__PAGE_OFFSET) - 16) && + (idx < pgd_index(__PAGE_OFFSET)); +} +#else +static inline bool is_hypervisor_range(int idx) { return false; } +#endif + static void ptdump_walk_pgd_level_core(struct seq_file *m, pgd_t *pgd, bool checkwx) { @@ -381,7 +396,7 @@ static void ptdump_walk_pgd_level_core(struct seq_file *m, pgd_t *pgd, for (i = 0; i < PTRS_PER_PGD; i++) { st.current_address = normalize_addr(i * PGD_LEVEL_MULT); - if (!pgd_none(*start)) { + if (!pgd_none(*start) && !is_hypervisor_range(i)) { if (pgd_large(*start) || !pgd_present(*start)) { prot = pgd_flags(*start); note_page(m, &st, __pgprot(prot), 1); diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c index eecb207a2037..a6d739258137 100644 --- a/arch/x86/mm/highmem_32.c +++ b/arch/x86/mm/highmem_32.c @@ -104,20 +104,6 @@ void __kunmap_atomic(void *kvaddr) } EXPORT_SYMBOL(__kunmap_atomic); -struct page *kmap_atomic_to_page(void *ptr) -{ - unsigned long idx, vaddr = (unsigned long)ptr; - pte_t *pte; - - if (vaddr < FIXADDR_START) - return virt_to_page(ptr); - - idx = virt_to_fix(vaddr); - pte = kmap_pte - (idx - FIX_KMAP_BEGIN); - return pte_page(*pte); -} -EXPORT_SYMBOL(kmap_atomic_to_page); - void __init set_highmem_pages_init(void) { struct zone *zone; diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index 1f37cb2b56a9..493f54172b4a 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -354,7 +354,7 @@ static int __meminit split_mem_range(struct map_range *mr, int nr_range, } for (i = 0; i < nr_range; i++) - printk(KERN_DEBUG " [mem %#010lx-%#010lx] page %s\n", + pr_debug(" [mem %#010lx-%#010lx] page %s\n", mr[i].start, mr[i].end - 1, page_size_string(&mr[i])); @@ -401,7 +401,7 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, unsigned long ret = 0; int nr_range, i; - pr_info("init_memory_mapping: [mem %#010lx-%#010lx]\n", + pr_debug("init_memory_mapping: [mem %#010lx-%#010lx]\n", start, end - 1); memset(mr, 0, sizeof(mr)); diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 5ed62eff31bd..ec081fe0ce2c 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -1270,7 +1270,7 @@ static int __meminit vmemmap_populate_hugepages(unsigned long start, /* check to see if we have contiguous blocks */ if (p_end != p || node_start != node) { if (p_start) - printk(KERN_DEBUG " [%lx-%lx] PMD -> [%p-%p] on node %d\n", + pr_debug(" [%lx-%lx] PMD -> [%p-%p] on node %d\n", addr_start, addr_end-1, p_start, p_end-1, node_start); addr_start = addr; node_start = node; @@ -1368,7 +1368,7 @@ void register_page_bootmem_memmap(unsigned long section_nr, void __meminit vmemmap_populate_print_last(void) { if (p_start) { - printk(KERN_DEBUG " [%lx-%lx] PMD -> [%p-%p] on node %d\n", + pr_debug(" [%lx-%lx] PMD -> [%p-%p] on node %d\n", addr_start, addr_end-1, p_start, p_end-1, node_start); p_start = NULL; p_end = NULL; diff --git a/arch/x86/um/stub_32.S b/arch/x86/um/stub_32.S index b972649d3a18..98816804e131 100644 --- a/arch/x86/um/stub_32.S +++ b/arch/x86/um/stub_32.S @@ -1,6 +1,5 @@ #include <as-layout.h> - .globl syscall_stub .section .__syscall_stub, "ax" .globl batch_syscall_stub diff --git a/arch/x86/um/stub_64.S b/arch/x86/um/stub_64.S index 7160b20172d0..ba914b3b8cc4 100644 --- a/arch/x86/um/stub_64.S +++ b/arch/x86/um/stub_64.S @@ -1,25 +1,9 @@ #include <as-layout.h> - .globl syscall_stub .section .__syscall_stub, "ax" -syscall_stub: - syscall - /* We don't have 64-bit constants, so this constructs the address - * we need. - */ - movq $(STUB_DATA >> 32), %rbx - salq $32, %rbx - movq $(STUB_DATA & 0xffffffff), %rcx - or %rcx, %rbx - movq %rax, (%rbx) - int3 - .globl batch_syscall_stub batch_syscall_stub: - mov $(STUB_DATA >> 32), %rbx - sal $32, %rbx - mov $(STUB_DATA & 0xffffffff), %rax - or %rax, %rbx + mov $(STUB_DATA), %rbx /* load pointer to first operation */ mov %rbx, %rsp add $0x10, %rsp diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 3bd3504a6cc7..82044f732323 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -17,6 +17,7 @@ config XTENSA select HAVE_DMA_API_DEBUG select HAVE_DMA_ATTRS select HAVE_FUNCTION_TRACER + select HAVE_FUTEX_CMPXCHG if !MMU select HAVE_IRQ_TIME_ACCOUNTING select HAVE_OPROFILE select HAVE_PERF_EVENTS @@ -397,6 +398,20 @@ config SIMDISK1_FILENAME source "mm/Kconfig" +config FORCE_MAX_ZONEORDER + int "Maximum zone order" + default "11" + help + The kernel memory allocator divides physically contiguous memory + blocks into "zones", where each zone is a power of two number of + pages. This option selects the largest power of two that the kernel + keeps in the memory allocator. If you need to allocate very large + blocks of physically contiguous memory, then you may need to + increase this value. + + This config option is actually maximum order plus one. For example, + a value of 11 means that the largest free memory block is 2^10 pages. + source "drivers/pcmcia/Kconfig" source "drivers/pci/hotplug/Kconfig" @@ -408,7 +423,7 @@ config DEFAULT_MEM_START hex "Physical address of the default memory area start" depends on PLATFORM_WANT_DEFAULT_MEM default 0x00000000 if MMU - default 0x40000000 if !MMU + default 0x60000000 if !MMU help This is a fallback start address of the default memory area, it is used when no physical memory size is passed through DTB or through diff --git a/arch/xtensa/boot/boot-elf/boot.lds.S b/arch/xtensa/boot/boot-elf/boot.lds.S index 958b33af96b7..e54f2c9df63a 100644 --- a/arch/xtensa/boot/boot-elf/boot.lds.S +++ b/arch/xtensa/boot/boot-elf/boot.lds.S @@ -40,17 +40,4 @@ SECTIONS *(.bss) __bss_end = .; } - -#ifdef CONFIG_MMU - /* - * This is a remapped copy of the Reset Vector Code. - * It keeps gdb in sync with the PC after switching - * to the temporary mapping used while setting up - * the V2 MMU mappings for Linux. - */ - .ResetVector.remapped_text 0x46000000 (INFO): - { - *(.ResetVector.remapped_text) - } -#endif } diff --git a/arch/xtensa/boot/boot-elf/bootstrap.S b/arch/xtensa/boot/boot-elf/bootstrap.S index 9341a5750694..e6bf313613cf 100644 --- a/arch/xtensa/boot/boot-elf/bootstrap.S +++ b/arch/xtensa/boot/boot-elf/bootstrap.S @@ -58,8 +58,6 @@ _SetupMMU: wsr a0, ps rsync - Offset = _SetupMMU - _ResetVector - #ifndef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX initialize_mmu #endif @@ -74,29 +72,3 @@ reset: movi a3, 0 movi a4, 0 jx a0 - -#ifdef CONFIG_MMU - .align 4 - - .section .ResetVector.remapped_text, "x" - .global _RemappedResetVector - - /* Do org before literals */ - .org 0 - -_RemappedResetVector: - .begin no-absolute-literals - .literal_position - - _j _RemappedSetupMMU - - /* Position Remapped code at the same location as the original code */ - . = _RemappedResetVector + Offset - -_RemappedSetupMMU: -#ifndef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX - initialize_mmu -#endif - - .end no-absolute-literals -#endif diff --git a/arch/xtensa/boot/dts/kc705_nommu.dts b/arch/xtensa/boot/dts/kc705_nommu.dts new file mode 100644 index 000000000000..65f3d741b964 --- /dev/null +++ b/arch/xtensa/boot/dts/kc705_nommu.dts @@ -0,0 +1,17 @@ +/dts-v1/; +/include/ "xtfpga.dtsi" +/include/ "xtfpga-flash-128m.dtsi" + +/ { + compatible = "cdns,xtensa-kc705"; + chosen { + bootargs = "earlycon=uart8250,mmio32,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug"; + }; + memory@0 { + device_type = "memory"; + reg = <0x60000000 0x10000000>; + }; + soc { + ranges = <0x00000000 0x90000000 0x10000000>; + }; +}; diff --git a/arch/xtensa/configs/nommu_kc705_defconfig b/arch/xtensa/configs/nommu_kc705_defconfig new file mode 100644 index 000000000000..337d5ba2d285 --- /dev/null +++ b/arch/xtensa/configs/nommu_kc705_defconfig @@ -0,0 +1,131 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IRQ_TIME_ACCOUNTING=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_CGROUP_DEBUG=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_MEMCG=y +CONFIG_NAMESPACES=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_RD_XZ is not set +# CONFIG_RD_LZO is not set +# CONFIG_RD_LZ4 is not set +CONFIG_EXPERT=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +CONFIG_PERF_EVENTS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_XTENSA_VARIANT_CUSTOM=y +CONFIG_XTENSA_VARIANT_CUSTOM_NAME="de212" +# CONFIG_XTENSA_VARIANT_MMU is not set +CONFIG_XTENSA_UNALIGNED_USER=y +CONFIG_PREEMPT=y +# CONFIG_PCI is not set +CONFIG_XTENSA_PLATFORM_XTFPGA=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="earlycon=uart8250,mmio32,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug" +CONFIG_USE_OF=y +CONFIG_BUILTIN_DTB="kc705_nommu" +CONFIG_DEFAULT_MEM_SIZE=0x10000000 +CONFIG_BINFMT_FLAT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +CONFIG_MTD=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_MARVELL_PHY=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_HW_RANDOM=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_SOFT_WATCHDOG=y +# CONFIG_VGA_CONSOLE is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y +CONFIG_FANOTIFY=y +CONFIG_VFAT_FS=y +CONFIG_JFFS2_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y +CONFIG_SUNRPC_DEBUG=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_DEBUG_INFO=y +# CONFIG_FRAME_POINTER is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_VM=y +CONFIG_DEBUG_NOMMU_REGIONS=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_LOCKUP_DETECTOR=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_ATOMIC_SLEEP=y +CONFIG_STACKTRACE=y +# CONFIG_RCU_CPU_STALL_INFO is not set +CONFIG_RCU_TRACE=y +# CONFIG_FTRACE is not set +# CONFIG_LD_NO_RELAX is not set +# CONFIG_CRYPTO_ECHAINIV is not set +CONFIG_CRYPTO_ANSI_CPRNG=y diff --git a/arch/xtensa/include/asm/asmmacro.h b/arch/xtensa/include/asm/asmmacro.h index 755320f6e0bc..746dcc8b5abc 100644 --- a/arch/xtensa/include/asm/asmmacro.h +++ b/arch/xtensa/include/asm/asmmacro.h @@ -35,9 +35,10 @@ * __loop as * restart loop. 'as' register must not have been modified! * - * __endla ar, at, incr + * __endla ar, as, incr * ar start address (modified) - * as scratch register used by macro + * as scratch register used by __loops/__loopi macros or + * end address used by __loopt macro * inc increment */ @@ -97,7 +98,7 @@ .endm /* - * loop from ar to ax + * loop from ar to as */ .macro __loopt ar, as, at, incr_log2 diff --git a/arch/xtensa/include/asm/cacheasm.h b/arch/xtensa/include/asm/cacheasm.h index 60e18773ecb8..e0f9e1109c83 100644 --- a/arch/xtensa/include/asm/cacheasm.h +++ b/arch/xtensa/include/asm/cacheasm.h @@ -73,7 +73,9 @@ .macro ___unlock_dcache_all ar at +#if XCHAL_DCACHE_SIZE __loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH +#endif .endm @@ -90,30 +92,38 @@ .macro ___flush_invalidate_dcache_all ar at +#if XCHAL_DCACHE_SIZE __loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH +#endif .endm .macro ___flush_dcache_all ar at +#if XCHAL_DCACHE_SIZE __loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH +#endif .endm .macro ___invalidate_dcache_all ar at +#if XCHAL_DCACHE_SIZE __loop_cache_all \ar \at dii __stringify(DCACHE_WAY_SIZE) \ XCHAL_DCACHE_LINEWIDTH +#endif .endm .macro ___invalidate_icache_all ar at +#if XCHAL_ICACHE_SIZE __loop_cache_all \ar \at iii __stringify(ICACHE_WAY_SIZE) \ XCHAL_ICACHE_LINEWIDTH +#endif .endm @@ -121,28 +131,36 @@ .macro ___flush_invalidate_dcache_range ar as at +#if XCHAL_DCACHE_SIZE __loop_cache_range \ar \as \at dhwbi XCHAL_DCACHE_LINEWIDTH +#endif .endm .macro ___flush_dcache_range ar as at +#if XCHAL_DCACHE_SIZE __loop_cache_range \ar \as \at dhwb XCHAL_DCACHE_LINEWIDTH +#endif .endm .macro ___invalidate_dcache_range ar as at +#if XCHAL_DCACHE_SIZE __loop_cache_range \ar \as \at dhi XCHAL_DCACHE_LINEWIDTH +#endif .endm .macro ___invalidate_icache_range ar as at +#if XCHAL_ICACHE_SIZE __loop_cache_range \ar \as \at ihi XCHAL_ICACHE_LINEWIDTH +#endif .endm @@ -150,27 +168,35 @@ .macro ___flush_invalidate_dcache_page ar as +#if XCHAL_DCACHE_SIZE __loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH +#endif .endm .macro ___flush_dcache_page ar as +#if XCHAL_DCACHE_SIZE __loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH +#endif .endm .macro ___invalidate_dcache_page ar as +#if XCHAL_DCACHE_SIZE __loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH +#endif .endm .macro ___invalidate_icache_page ar as +#if XCHAL_ICACHE_SIZE __loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH +#endif .endm diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h index 5f67ace97b32..397d6a1a4224 100644 --- a/arch/xtensa/include/asm/cacheflush.h +++ b/arch/xtensa/include/asm/cacheflush.h @@ -55,9 +55,14 @@ extern void __flush_dcache_range(unsigned long, unsigned long); extern void __flush_invalidate_dcache_page(unsigned long); extern void __flush_invalidate_dcache_range(unsigned long, unsigned long); #else -# define __flush_dcache_range(p,s) do { } while(0) -# define __flush_dcache_page(p) do { } while(0) -# define __flush_invalidate_dcache_page(p) __invalidate_dcache_page(p) +static inline void __flush_dcache_page(unsigned long va) +{ +} +static inline void __flush_dcache_range(unsigned long va, unsigned long sz) +{ +} +# define __flush_invalidate_dcache_all() __invalidate_dcache_all() +# define __flush_invalidate_dcache_page(p) __invalidate_dcache_page(p) # define __flush_invalidate_dcache_range(p,s) __invalidate_dcache_range(p,s) #endif @@ -174,99 +179,4 @@ extern void copy_from_user_page(struct vm_area_struct*, struct page*, #endif -#define XTENSA_CACHEBLK_LOG2 29 -#define XTENSA_CACHEBLK_SIZE (1 << XTENSA_CACHEBLK_LOG2) -#define XTENSA_CACHEBLK_MASK (7 << XTENSA_CACHEBLK_LOG2) - -#if XCHAL_HAVE_CACHEATTR -static inline u32 xtensa_get_cacheattr(void) -{ - u32 r; - asm volatile(" rsr %0, cacheattr" : "=a"(r)); - return r; -} - -static inline u32 xtensa_get_dtlb1(u32 addr) -{ - u32 r = addr & XTENSA_CACHEBLK_MASK; - return r | ((xtensa_get_cacheattr() >> (r >> (XTENSA_CACHEBLK_LOG2-2))) - & 0xF); -} -#else -static inline u32 xtensa_get_dtlb1(u32 addr) -{ - u32 r; - asm volatile(" rdtlb1 %0, %1" : "=a"(r) : "a"(addr)); - asm volatile(" dsync"); - return r; -} - -static inline u32 xtensa_get_cacheattr(void) -{ - u32 r = 0; - u32 a = 0; - do { - a -= XTENSA_CACHEBLK_SIZE; - r = (r << 4) | (xtensa_get_dtlb1(a) & 0xF); - } while (a); - return r; -} -#endif - -static inline int xtensa_need_flush_dma_source(u32 addr) -{ - return (xtensa_get_dtlb1(addr) & ((1 << XCHAL_CA_BITS) - 1)) >= 4; -} - -static inline int xtensa_need_invalidate_dma_destination(u32 addr) -{ - return (xtensa_get_dtlb1(addr) & ((1 << XCHAL_CA_BITS) - 1)) != 2; -} - -static inline void flush_dcache_unaligned(u32 addr, u32 size) -{ - u32 cnt; - if (size) { - cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr) - + XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE; - while (cnt--) { - asm volatile(" dhwb %0, 0" : : "a"(addr)); - addr += XCHAL_DCACHE_LINESIZE; - } - asm volatile(" dsync"); - } -} - -static inline void invalidate_dcache_unaligned(u32 addr, u32 size) -{ - int cnt; - if (size) { - asm volatile(" dhwbi %0, 0 ;" : : "a"(addr)); - cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr) - - XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE; - while (cnt-- > 0) { - asm volatile(" dhi %0, %1" : : "a"(addr), - "n"(XCHAL_DCACHE_LINESIZE)); - addr += XCHAL_DCACHE_LINESIZE; - } - asm volatile(" dhwbi %0, %1" : : "a"(addr), - "n"(XCHAL_DCACHE_LINESIZE)); - asm volatile(" dsync"); - } -} - -static inline void flush_invalidate_dcache_unaligned(u32 addr, u32 size) -{ - u32 cnt; - if (size) { - cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr) - + XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE; - while (cnt--) { - asm volatile(" dhwbi %0, 0" : : "a"(addr)); - addr += XCHAL_DCACHE_LINESIZE; - } - asm volatile(" dsync"); - } -} - #endif /* _XTENSA_CACHEFLUSH_H */ diff --git a/arch/xtensa/include/asm/dma-mapping.h b/arch/xtensa/include/asm/dma-mapping.h index 4427f38b634e..66c9ba261e30 100644 --- a/arch/xtensa/include/asm/dma-mapping.h +++ b/arch/xtensa/include/asm/dma-mapping.h @@ -35,4 +35,14 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev) void dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction direction); +static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) +{ + return (dma_addr_t)paddr; +} + +static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr) +{ + return (phys_addr_t)daddr; +} + #endif /* _XTENSA_DMA_MAPPING_H */ diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h index e256f2270ec9..7a1e075969a3 100644 --- a/arch/xtensa/include/asm/initialize_mmu.h +++ b/arch/xtensa/include/asm/initialize_mmu.h @@ -161,7 +161,8 @@ #endif /* defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY */ -#if !defined(CONFIG_MMU) && XCHAL_HAVE_TLBS +#if !defined(CONFIG_MMU) && XCHAL_HAVE_TLBS && \ + (XCHAL_DCACHE_SIZE || XCHAL_ICACHE_SIZE) /* Enable data and instruction cache in the DEFAULT_MEMORY region * if the processor has DTLB and ITLB. */ @@ -175,14 +176,18 @@ 1: sub a9, a9, a8 2: +#if XCHAL_DCACHE_SIZE rdtlb1 a3, a5 - ritlb1 a4, a5 and a3, a3, a6 - and a4, a4, a6 or a3, a3, a7 - or a4, a4, a7 wdtlb a3, a5 +#endif +#if XCHAL_ICACHE_SIZE + ritlb1 a4, a5 + and a4, a4, a6 + or a4, a4, a7 witlb a4, a5 +#endif add a5, a5, a8 bltu a8, a9, 1b diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h index 867840f5400f..74fed0b4e2c2 100644 --- a/arch/xtensa/include/asm/io.h +++ b/arch/xtensa/include/asm/io.h @@ -25,15 +25,6 @@ #ifdef CONFIG_MMU -#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF) -extern unsigned long xtensa_kio_paddr; - -static inline unsigned long xtensa_get_kio_paddr(void) -{ - return xtensa_kio_paddr; -} -#endif - /* * Return the virtual address for the specified bus memory. * Note that we currently don't support any address outside the KIO segment. diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h index a5e929a10c20..fb02fdc5ecee 100644 --- a/arch/xtensa/include/asm/pgtable.h +++ b/arch/xtensa/include/asm/pgtable.h @@ -18,7 +18,11 @@ * We only use two ring levels, user and kernel space. */ +#ifdef CONFIG_MMU #define USER_RING 1 /* user ring level */ +#else +#define USER_RING 0 +#endif #define KERNEL_RING 0 /* kernel ring level */ /* diff --git a/arch/xtensa/include/asm/vectors.h b/arch/xtensa/include/asm/vectors.h index a46c53f36113..288c776736d3 100644 --- a/arch/xtensa/include/asm/vectors.h +++ b/arch/xtensa/include/asm/vectors.h @@ -21,13 +21,26 @@ #include <variant/core.h> #include <platform/hardware.h> +#if XCHAL_HAVE_PTP_MMU #define XCHAL_KIO_CACHED_VADDR 0xe0000000 #define XCHAL_KIO_BYPASS_VADDR 0xf0000000 #define XCHAL_KIO_DEFAULT_PADDR 0xf0000000 +#else +#define XCHAL_KIO_BYPASS_VADDR XCHAL_KIO_PADDR +#define XCHAL_KIO_DEFAULT_PADDR 0x90000000 +#endif #define XCHAL_KIO_SIZE 0x10000000 -#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF) +#if (!XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY) && defined(CONFIG_OF) #define XCHAL_KIO_PADDR xtensa_get_kio_paddr() +#ifndef __ASSEMBLY__ +extern unsigned long xtensa_kio_paddr; + +static inline unsigned long xtensa_get_kio_paddr(void) +{ + return xtensa_kio_paddr; +} +#endif #else #define XCHAL_KIO_PADDR XCHAL_KIO_DEFAULT_PADDR #endif @@ -48,6 +61,9 @@ #define LOAD_MEMORY_ADDRESS 0xD0003000 #endif +#define RESET_VECTOR1_VADDR (VIRTUAL_MEMORY_ADDRESS + \ + XCHAL_RESET_VECTOR1_PADDR) + #else /* !defined(CONFIG_MMU) */ /* MMU Not being used - Virtual == Physical */ @@ -60,6 +76,8 @@ /* Loaded just above possibly live vectors */ #define LOAD_MEMORY_ADDRESS (PLATFORM_DEFAULT_MEM_START + 0x3000) +#define RESET_VECTOR1_VADDR (XCHAL_RESET_VECTOR1_VADDR) + #endif /* CONFIG_MMU */ #define XC_VADDR(offset) (VIRTUAL_MEMORY_ADDRESS + offset) @@ -67,14 +85,6 @@ /* Used to set VECBASE register */ #define VECBASE_RESET_VADDR VIRTUAL_MEMORY_ADDRESS -#define RESET_VECTOR_VECOFS (XCHAL_RESET_VECTOR_VADDR - \ - VECBASE_RESET_VADDR) -#define RESET_VECTOR_VADDR XC_VADDR(RESET_VECTOR_VECOFS) - -#define RESET_VECTOR1_VECOFS (XCHAL_RESET_VECTOR1_VADDR - \ - VECBASE_RESET_VADDR) -#define RESET_VECTOR1_VADDR XC_VADDR(RESET_VECTOR1_VECOFS) - #if defined(XCHAL_HAVE_VECBASE) && XCHAL_HAVE_VECBASE #define USER_VECTOR_VADDR XC_VADDR(XCHAL_USER_VECOFS) diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile index 50137bc9e150..4db730290d2d 100644 --- a/arch/xtensa/kernel/Makefile +++ b/arch/xtensa/kernel/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_SMP) += smp.o mxhead.o obj-$(CONFIG_XTENSA_VARIANT_HAVE_PERF_EVENTS) += perf_event.o AFLAGS_head.o += -mtext-section-literals +AFLAGS_mxhead.o += -mtext-section-literals # In the Xtensa architecture, assembly generates literals which must always # precede the L32R instruction with a relative offset less than 256 kB. diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index 504130357597..db5c1765b413 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -367,8 +367,10 @@ common_exception: s32i a2, a1, PT_SYSCALL movi a2, 0 s32i a3, a1, PT_EXCVADDR +#if XCHAL_HAVE_LOOPS xsr a2, lcount s32i a2, a1, PT_LCOUNT +#endif /* It is now save to restore the EXC_TABLE_FIXUP variable. */ @@ -429,11 +431,12 @@ common_exception: rsync # PS.WOE => rsync => overflow /* Save lbeg, lend */ - +#if XCHAL_HAVE_LOOPS rsr a4, lbeg rsr a3, lend s32i a4, a1, PT_LBEG s32i a3, a1, PT_LEND +#endif /* Save SCOMPARE1 */ @@ -724,13 +727,14 @@ common_exception_exit: wsr a3, sar /* Restore LBEG, LEND, LCOUNT */ - +#if XCHAL_HAVE_LOOPS l32i a2, a1, PT_LBEG l32i a3, a1, PT_LEND wsr a2, lbeg l32i a2, a1, PT_LCOUNT wsr a3, lend wsr a2, lcount +#endif /* We control single stepping through the ICOUNTLEVEL register. */ diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S index 15a461e2a0ed..9ed55649ac8e 100644 --- a/arch/xtensa/kernel/head.S +++ b/arch/xtensa/kernel/head.S @@ -249,7 +249,7 @@ ENTRY(_startup) __loopt a2, a3, a4, 2 s32i a0, a2, 0 - __endla a2, a4, 4 + __endla a2, a3, 4 #if XCHAL_DCACHE_IS_WRITEBACK diff --git a/arch/xtensa/kernel/mxhead.S b/arch/xtensa/kernel/mxhead.S index 77a161a112c5..9f3843742726 100644 --- a/arch/xtensa/kernel/mxhead.S +++ b/arch/xtensa/kernel/mxhead.S @@ -48,8 +48,6 @@ _SetupOCD: rsync _SetupMMU: - Offset = _SetupMMU - _SecondaryResetVector - #ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX initialize_mmu #endif @@ -62,24 +60,3 @@ _SetupMMU: jx a3 .end no-absolute-literals - - - .section .SecondaryResetVector.remapped_text, "ax" - .global _RemappedSecondaryResetVector - - .org 0 # Need to do org before literals - -_RemappedSecondaryResetVector: - .begin no-absolute-literals - .literal_position - - _j _RemappedSetupMMU - . = _RemappedSecondaryResetVector + Offset - -_RemappedSetupMMU: - -#ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX - initialize_mmu -#endif - - .end no-absolute-literals diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c index fb75ebf1463a..cd66698348ca 100644 --- a/arch/xtensa/kernel/pci-dma.c +++ b/arch/xtensa/kernel/pci-dma.c @@ -15,14 +15,15 @@ * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> */ -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/string.h> -#include <linux/pci.h> #include <linux/gfp.h> +#include <linux/highmem.h> +#include <linux/mm.h> #include <linux/module.h> -#include <asm/io.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/types.h> #include <asm/cacheflush.h> +#include <asm/io.h> void dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction dir) @@ -47,17 +48,36 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size, } EXPORT_SYMBOL(dma_cache_sync); +static void do_cache_op(dma_addr_t dma_handle, size_t size, + void (*fn)(unsigned long, unsigned long)) +{ + unsigned long off = dma_handle & (PAGE_SIZE - 1); + unsigned long pfn = PFN_DOWN(dma_handle); + struct page *page = pfn_to_page(pfn); + + if (!PageHighMem(page)) + fn((unsigned long)bus_to_virt(dma_handle), size); + else + while (size > 0) { + size_t sz = min_t(size_t, size, PAGE_SIZE - off); + void *vaddr = kmap_atomic(page); + + fn((unsigned long)vaddr + off, sz); + kunmap_atomic(vaddr); + off = 0; + ++page; + size -= sz; + } +} + static void xtensa_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction dir) { - void *vaddr; - switch (dir) { case DMA_BIDIRECTIONAL: case DMA_FROM_DEVICE: - vaddr = bus_to_virt(dma_handle); - __invalidate_dcache_range((unsigned long)vaddr, size); + do_cache_op(dma_handle, size, __invalidate_dcache_range); break; case DMA_NONE: @@ -73,13 +93,11 @@ static void xtensa_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction dir) { - void *vaddr; - switch (dir) { case DMA_BIDIRECTIONAL: case DMA_TO_DEVICE: - vaddr = bus_to_virt(dma_handle); - __flush_dcache_range((unsigned long)vaddr, size); + if (XCHAL_DCACHE_IS_WRITEBACK) + do_cache_op(dma_handle, size, __flush_dcache_range); break; case DMA_NONE: @@ -171,7 +189,6 @@ static dma_addr_t xtensa_map_page(struct device *dev, struct page *page, { dma_addr_t dma_handle = page_to_phys(page) + offset; - BUG_ON(PageHighMem(page)); xtensa_sync_single_for_device(dev, dma_handle, size, dir); return dma_handle; } diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index 28fc57ef5b86..9735691f37f1 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -190,7 +190,7 @@ static int __init parse_bootparam(const bp_tag_t* tag) #ifdef CONFIG_OF bool __initdata dt_memory_scan = false; -#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY +#if !XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR; EXPORT_SYMBOL(xtensa_kio_paddr); @@ -334,7 +334,10 @@ extern char _Level5InterruptVector_text_end; extern char _Level6InterruptVector_text_start; extern char _Level6InterruptVector_text_end; #endif - +#ifdef CONFIG_SMP +extern char _SecondaryResetVector_text_start; +extern char _SecondaryResetVector_text_end; +#endif #ifdef CONFIG_S32C1I_SELFTEST @@ -506,6 +509,10 @@ void __init setup_arch(char **cmdline_p) __pa(&_Level6InterruptVector_text_end), 0); #endif +#ifdef CONFIG_SMP + mem_reserve(__pa(&_SecondaryResetVector_text_start), + __pa(&_SecondaryResetVector_text_end), 0); +#endif parse_early_param(); bootmem_init(); diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S index abcdb527f18a..fc25318e75ad 100644 --- a/arch/xtensa/kernel/vectors.S +++ b/arch/xtensa/kernel/vectors.S @@ -478,6 +478,9 @@ _DoubleExceptionVector_handle_exception: ENDPROC(_DoubleExceptionVector) + .end literal_prefix + + .text /* * Fixup handler for TLB miss in double exception handler for window owerflow. * We get here with windowbase set to the window that was being spilled and @@ -587,7 +590,6 @@ ENTRY(window_overflow_restore_a0_fixup) ENDPROC(window_overflow_restore_a0_fixup) - .end literal_prefix /* * Debug interrupt vector * diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index fc1bc2ba8d5d..c417cbe4ec87 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -166,8 +166,6 @@ SECTIONS RELOCATE_ENTRY(_DebugInterruptVector_text, .DebugInterruptVector.text); #if defined(CONFIG_SMP) - RELOCATE_ENTRY(_SecondaryResetVector_literal, - .SecondaryResetVector.literal); RELOCATE_ENTRY(_SecondaryResetVector_text, .SecondaryResetVector.text); #endif @@ -282,17 +280,11 @@ SECTIONS #if defined(CONFIG_SMP) - SECTION_VECTOR (_SecondaryResetVector_literal, - .SecondaryResetVector.literal, - RESET_VECTOR1_VADDR - 4, - SIZEOF(.DoubleExceptionVector.text), - .DoubleExceptionVector.text) - SECTION_VECTOR (_SecondaryResetVector_text, .SecondaryResetVector.text, RESET_VECTOR1_VADDR, - 4, - .SecondaryResetVector.literal) + SIZEOF(.DoubleExceptionVector.text), + .DoubleExceptionVector.text) . = LOADADDR(.SecondaryResetVector.text)+SIZEOF(.SecondaryResetVector.text); @@ -306,31 +298,6 @@ SECTIONS _end = .; - /* only used by the boot loader */ - - . = ALIGN(0x10); - .bootstrap : { *(.bootstrap.literal .bootstrap.text .bootstrap.data) } - - .ResetVector.text RESET_VECTOR_VADDR : - { - *(.ResetVector.text) - } - - - /* - * This is a remapped copy of the Secondary Reset Vector Code. - * It keeps gdb in sync with the PC after switching - * to the temporary mapping used while setting up - * the V2 MMU mappings for Linux. - * - * Only debug information about this section is put in the kernel image. - */ - .SecondaryResetVector.remapped_text 0x46000000 (INFO): - { - *(.SecondaryResetVector.remapped_text) - } - - .xt.lit : { *(.xt.lit) } .xt.prop : { *(.xt.prop) } diff --git a/arch/xtensa/lib/usercopy.S b/arch/xtensa/lib/usercopy.S index ace1892a875e..7ea4dd68893e 100644 --- a/arch/xtensa/lib/usercopy.S +++ b/arch/xtensa/lib/usercopy.S @@ -222,8 +222,8 @@ __xtensa_copy_user: loopnez a7, .Loop2done #else /* !XCHAL_HAVE_LOOPS */ beqz a7, .Loop2done - slli a10, a7, 4 - add a10, a10, a3 # a10 = end of last 16B source chunk + slli a12, a7, 4 + add a12, a12, a3 # a12 = end of last 16B source chunk #endif /* !XCHAL_HAVE_LOOPS */ .Loop2: EX(l32i, a7, a3, 4, l_fixup) @@ -241,7 +241,7 @@ __xtensa_copy_user: EX(s32i, a9, a5, 12, s_fixup) addi a5, a5, 16 #if !XCHAL_HAVE_LOOPS - blt a3, a10, .Loop2 + blt a3, a12, .Loop2 #endif /* !XCHAL_HAVE_LOOPS */ .Loop2done: bbci.l a4, 3, .L12 diff --git a/arch/xtensa/platforms/iss/setup.c b/arch/xtensa/platforms/iss/setup.c index da7d18240866..391820539f0a 100644 --- a/arch/xtensa/platforms/iss/setup.c +++ b/arch/xtensa/platforms/iss/setup.c @@ -61,7 +61,9 @@ void platform_restart(void) #if XCHAL_NUM_IBREAK > 0 "wsr a2, ibreakenable\n\t" #endif +#if XCHAL_HAVE_LOOPS "wsr a2, lcount\n\t" +#endif "movi a2, 0x1f\n\t" "wsr a2, ps\n\t" "isync\n\t" diff --git a/arch/xtensa/platforms/iss/simdisk.c b/arch/xtensa/platforms/iss/simdisk.c index fa84ca990caa..3c3ace2c46b6 100644 --- a/arch/xtensa/platforms/iss/simdisk.c +++ b/arch/xtensa/platforms/iss/simdisk.c @@ -101,7 +101,7 @@ static void simdisk_transfer(struct simdisk *dev, unsigned long sector, spin_unlock(&dev->lock); } -static void simdisk_make_request(struct request_queue *q, struct bio *bio) +static blk_qc_t simdisk_make_request(struct request_queue *q, struct bio *bio) { struct simdisk *dev = q->queuedata; struct bio_vec bvec; @@ -119,6 +119,7 @@ static void simdisk_make_request(struct request_queue *q, struct bio *bio) } bio_endio(bio); + return BLK_QC_T_NONE; } static int simdisk_open(struct block_device *bdev, fmode_t mode) diff --git a/arch/xtensa/platforms/xt2000/setup.c b/arch/xtensa/platforms/xt2000/setup.c index b90555cb8089..87678961a8c8 100644 --- a/arch/xtensa/platforms/xt2000/setup.c +++ b/arch/xtensa/platforms/xt2000/setup.c @@ -72,7 +72,9 @@ void platform_restart(void) #if XCHAL_NUM_IBREAK > 0 "wsr a2, ibreakenable\n\t" #endif +#if XCHAL_HAVE_LOOPS "wsr a2, lcount\n\t" +#endif "movi a2, 0x1f\n\t" "wsr a2, ps\n\t" "isync\n\t" diff --git a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h index 0a55bb9c5420..dbeea2b440a1 100644 --- a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h +++ b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h @@ -12,13 +12,15 @@ * This file contains the hardware configuration of the XTAVNET boards. */ +#include <asm/types.h> + #ifndef __XTENSA_XTAVNET_HARDWARE_H #define __XTENSA_XTAVNET_HARDWARE_H /* Memory configuration. */ -#define PLATFORM_DEFAULT_MEM_START CONFIG_DEFAULT_MEM_START -#define PLATFORM_DEFAULT_MEM_SIZE CONFIG_DEFAULT_MEM_SIZE +#define PLATFORM_DEFAULT_MEM_START __XTENSA_UL(CONFIG_DEFAULT_MEM_START) +#define PLATFORM_DEFAULT_MEM_SIZE __XTENSA_UL(CONFIG_DEFAULT_MEM_SIZE) /* Interrupt configuration. */ diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c index b4cf70e535ab..e9f65f79cf2e 100644 --- a/arch/xtensa/platforms/xtfpga/setup.c +++ b/arch/xtensa/platforms/xtfpga/setup.c @@ -63,7 +63,9 @@ void platform_restart(void) #if XCHAL_NUM_IBREAK > 0 "wsr a2, ibreakenable\n\t" #endif +#if XCHAL_HAVE_LOOPS "wsr a2, lcount\n\t" +#endif "movi a2, 0x1f\n\t" "wsr a2, ps\n\t" "isync\n\t" diff --git a/arch/xtensa/variants/de212/include/variant/core.h b/arch/xtensa/variants/de212/include/variant/core.h new file mode 100644 index 000000000000..59e91e47ef3c --- /dev/null +++ b/arch/xtensa/variants/de212/include/variant/core.h @@ -0,0 +1,594 @@ +/* + * xtensa/config/core-isa.h -- HAL definitions that are dependent on Xtensa + * processor CORE configuration + * + * See <xtensa/config/core.h>, which includes this file, for more details. + */ + +/* Xtensa processor core configuration information. + + Copyright (c) 1999-2015 Tensilica Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_CONFIGURATION_H +#define _XTENSA_CORE_CONFIGURATION_H + + +/**************************************************************************** + Parameters Useful for Any Code, USER or PRIVILEGED + ****************************************************************************/ + +/* + * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is + * configured, and a value of 0 otherwise. These macros are always defined. + */ + + +/*---------------------------------------------------------------------- + ISA + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_BE 0 /* big-endian byte ordering */ +#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */ +#define XCHAL_NUM_AREGS 32 /* num of physical addr regs */ +#define XCHAL_NUM_AREGS_LOG2 5 /* log2(XCHAL_NUM_AREGS) */ +#define XCHAL_MAX_INSTRUCTION_SIZE 3 /* max instr bytes (3..8) */ +#define XCHAL_HAVE_DEBUG 1 /* debug option */ +#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */ +#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */ +#define XCHAL_LOOP_BUFFER_SIZE 0 /* zero-ov. loop instr buffer size */ +#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */ +#define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */ +#define XCHAL_HAVE_SEXT 1 /* SEXT instruction */ +#define XCHAL_HAVE_DEPBITS 0 /* DEPBITS instruction */ +#define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */ +#define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */ +#define XCHAL_HAVE_MUL32 1 /* MULL instruction */ +#define XCHAL_HAVE_MUL32_HIGH 0 /* MULUH/MULSH instructions */ +#define XCHAL_HAVE_DIV32 1 /* QUOS/QUOU/REMS/REMU instructions */ +#define XCHAL_HAVE_L32R 1 /* L32R instruction */ +#define XCHAL_HAVE_ABSOLUTE_LITERALS 0 /* non-PC-rel (extended) L32R */ +#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */ +#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */ +#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */ +#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */ +#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */ +#define XCHAL_HAVE_ABS 1 /* ABS instruction */ +/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */ +/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */ +#define XCHAL_HAVE_RELEASE_SYNC 1 /* L32AI/S32RI instructions */ +#define XCHAL_HAVE_S32C1I 1 /* S32C1I instruction */ +#define XCHAL_HAVE_SPECULATION 0 /* speculation */ +#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */ +#define XCHAL_NUM_CONTEXTS 1 /* */ +#define XCHAL_NUM_MISC_REGS 2 /* num of scratch regs (0..4) */ +#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */ +#define XCHAL_HAVE_PRID 1 /* processor ID register */ +#define XCHAL_HAVE_EXTERN_REGS 1 /* WER/RER instructions */ +#define XCHAL_HAVE_MX 0 /* MX core (Tensilica internal) */ +#define XCHAL_HAVE_MP_INTERRUPTS 0 /* interrupt distributor port */ +#define XCHAL_HAVE_MP_RUNSTALL 0 /* core RunStall control port */ +#define XCHAL_HAVE_PSO 0 /* Power Shut-Off */ +#define XCHAL_HAVE_PSO_CDM 0 /* core/debug/mem pwr domains */ +#define XCHAL_HAVE_PSO_FULL_RETENTION 0 /* all regs preserved on PSO */ +#define XCHAL_HAVE_THREADPTR 0 /* THREADPTR register */ +#define XCHAL_HAVE_BOOLEANS 0 /* boolean registers */ +#define XCHAL_HAVE_CP 0 /* CPENABLE reg (coprocessor) */ +#define XCHAL_CP_MAXCFG 0 /* max allowed cp id plus one */ +#define XCHAL_HAVE_MAC16 1 /* MAC16 package */ + +#define XCHAL_HAVE_FUSION 0 /* Fusion*/ +#define XCHAL_HAVE_FUSION_FP 0 /* Fusion FP option */ +#define XCHAL_HAVE_FUSION_LOW_POWER 0 /* Fusion Low Power option */ +#define XCHAL_HAVE_FUSION_AES 0 /* Fusion BLE/Wifi AES-128 CCM option */ +#define XCHAL_HAVE_FUSION_CONVENC 0 /* Fusion Conv Encode option */ +#define XCHAL_HAVE_FUSION_LFSR_CRC 0 /* Fusion LFSR-CRC option */ +#define XCHAL_HAVE_FUSION_BITOPS 0 /* Fusion Bit Operations Support option */ +#define XCHAL_HAVE_FUSION_AVS 0 /* Fusion AVS option */ +#define XCHAL_HAVE_FUSION_16BIT_BASEBAND 0 /* Fusion 16-bit Baseband option */ +#define XCHAL_HAVE_HIFIPRO 0 /* HiFiPro Audio Engine pkg */ +#define XCHAL_HAVE_HIFI4 0 /* HiFi4 Audio Engine pkg */ +#define XCHAL_HAVE_HIFI4_VFPU 0 /* HiFi4 Audio Engine VFPU option */ +#define XCHAL_HAVE_HIFI3 0 /* HiFi3 Audio Engine pkg */ +#define XCHAL_HAVE_HIFI3_VFPU 0 /* HiFi3 Audio Engine VFPU option */ +#define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */ +#define XCHAL_HAVE_HIFI2EP 0 /* HiFi2EP */ +#define XCHAL_HAVE_HIFI_MINI 0 + + +#define XCHAL_HAVE_VECTORFPU2005 0 /* vector or user floating-point pkg */ +#define XCHAL_HAVE_USER_DPFPU 0 /* user DP floating-point pkg */ +#define XCHAL_HAVE_USER_SPFPU 0 /* user DP floating-point pkg */ +#define XCHAL_HAVE_FP 0 /* single prec floating point */ +#define XCHAL_HAVE_FP_DIV 0 /* FP with DIV instructions */ +#define XCHAL_HAVE_FP_RECIP 0 /* FP with RECIP instructions */ +#define XCHAL_HAVE_FP_SQRT 0 /* FP with SQRT instructions */ +#define XCHAL_HAVE_FP_RSQRT 0 /* FP with RSQRT instructions */ +#define XCHAL_HAVE_DFP 0 /* double precision FP pkg */ +#define XCHAL_HAVE_DFP_DIV 0 /* DFP with DIV instructions */ +#define XCHAL_HAVE_DFP_RECIP 0 /* DFP with RECIP instructions*/ +#define XCHAL_HAVE_DFP_SQRT 0 /* DFP with SQRT instructions */ +#define XCHAL_HAVE_DFP_RSQRT 0 /* DFP with RSQRT instructions*/ +#define XCHAL_HAVE_DFP_ACCEL 0 /* double precision FP acceleration pkg */ +#define XCHAL_HAVE_DFP_accel XCHAL_HAVE_DFP_ACCEL /* for backward compatibility */ + +#define XCHAL_HAVE_DFPU_SINGLE_ONLY 0 /* DFPU Coprocessor, single precision only */ +#define XCHAL_HAVE_DFPU_SINGLE_DOUBLE 0 /* DFPU Coprocessor, single and double precision */ +#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */ +#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */ +#define XCHAL_HAVE_PDX4 0 /* PDX4 */ +#define XCHAL_HAVE_CONNXD2 0 /* ConnX D2 pkg */ +#define XCHAL_HAVE_CONNXD2_DUALLSFLIX 0 /* ConnX D2 & Dual LoadStore Flix */ +#define XCHAL_HAVE_BBE16 0 /* ConnX BBE16 pkg */ +#define XCHAL_HAVE_BBE16_RSQRT 0 /* BBE16 & vector recip sqrt */ +#define XCHAL_HAVE_BBE16_VECDIV 0 /* BBE16 & vector divide */ +#define XCHAL_HAVE_BBE16_DESPREAD 0 /* BBE16 & despread */ +#define XCHAL_HAVE_BBENEP 0 /* ConnX BBENEP pkgs */ +#define XCHAL_HAVE_BSP3 0 /* ConnX BSP3 pkg */ +#define XCHAL_HAVE_BSP3_TRANSPOSE 0 /* BSP3 & transpose32x32 */ +#define XCHAL_HAVE_SSP16 0 /* ConnX SSP16 pkg */ +#define XCHAL_HAVE_SSP16_VITERBI 0 /* SSP16 & viterbi */ +#define XCHAL_HAVE_TURBO16 0 /* ConnX Turbo16 pkg */ +#define XCHAL_HAVE_BBP16 0 /* ConnX BBP16 pkg */ +#define XCHAL_HAVE_FLIX3 0 /* basic 3-way FLIX option */ +#define XCHAL_HAVE_GRIVPEP 0 /* GRIVPEP is General Release of IVPEP */ +#define XCHAL_HAVE_GRIVPEP_HISTOGRAM 0 /* Histogram option on GRIVPEP */ + + +/*---------------------------------------------------------------------- + MISC + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_LOADSTORE_UNITS 1 /* load/store units */ +#define XCHAL_NUM_WRITEBUFFER_ENTRIES 8 /* size of write buffer */ +#define XCHAL_INST_FETCH_WIDTH 4 /* instr-fetch width in bytes */ +#define XCHAL_DATA_WIDTH 4 /* data width in bytes */ +#define XCHAL_DATA_PIPE_DELAY 1 /* d-side pipeline delay + (1 = 5-stage, 2 = 7-stage) */ +#define XCHAL_CLOCK_GATING_GLOBAL 0 /* global clock gating */ +#define XCHAL_CLOCK_GATING_FUNCUNIT 0 /* funct. unit clock gating */ +/* In T1050, applies to selected core load and store instructions (see ISA): */ +#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* unaligned loads cause exc. */ +#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* unaligned stores cause exc.*/ +#define XCHAL_UNALIGNED_LOAD_HW 0 /* unaligned loads work in hw */ +#define XCHAL_UNALIGNED_STORE_HW 0 /* unaligned stores work in hw*/ + +#define XCHAL_SW_VERSION 1100002 /* sw version of this header */ + +#define XCHAL_CORE_ID "de212" /* alphanum core name + (CoreID) set in the Xtensa + Processor Generator */ + +#define XCHAL_BUILD_UNIQUE_ID 0x0005A985 /* 22-bit sw build ID */ + +/* + * These definitions describe the hardware targeted by this software. + */ +#define XCHAL_HW_CONFIGID0 0xC283DFFE /* ConfigID hi 32 bits*/ +#define XCHAL_HW_CONFIGID1 0x1C85A985 /* ConfigID lo 32 bits*/ +#define XCHAL_HW_VERSION_NAME "LX6.0.2" /* full version name */ +#define XCHAL_HW_VERSION_MAJOR 2600 /* major ver# of targeted hw */ +#define XCHAL_HW_VERSION_MINOR 2 /* minor ver# of targeted hw */ +#define XCHAL_HW_VERSION 260002 /* major*100+minor */ +#define XCHAL_HW_REL_LX6 1 +#define XCHAL_HW_REL_LX6_0 1 +#define XCHAL_HW_REL_LX6_0_2 1 +#define XCHAL_HW_CONFIGID_RELIABLE 1 +/* If software targets a *range* of hardware versions, these are the bounds: */ +#define XCHAL_HW_MIN_VERSION_MAJOR 2600 /* major v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION_MINOR 2 /* minor v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION 260002 /* earliest targeted hw */ +#define XCHAL_HW_MAX_VERSION_MAJOR 2600 /* major v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION_MINOR 2 /* minor v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION 260002 /* latest targeted hw */ + + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_ICACHE_LINESIZE 32 /* I-cache line size in bytes */ +#define XCHAL_DCACHE_LINESIZE 32 /* D-cache line size in bytes */ +#define XCHAL_ICACHE_LINEWIDTH 5 /* log2(I line size in bytes) */ +#define XCHAL_DCACHE_LINEWIDTH 5 /* log2(D line size in bytes) */ + +#define XCHAL_ICACHE_SIZE 8192 /* I-cache size in bytes or 0 */ +#define XCHAL_DCACHE_SIZE 8192 /* D-cache size in bytes or 0 */ + +#define XCHAL_DCACHE_IS_WRITEBACK 1 /* writeback feature */ +#define XCHAL_DCACHE_IS_COHERENT 0 /* MP coherence feature */ + +#define XCHAL_HAVE_PREFETCH 0 /* PREFCTL register */ +#define XCHAL_HAVE_PREFETCH_L1 0 /* prefetch to L1 dcache */ +#define XCHAL_PREFETCH_CASTOUT_LINES 0 /* dcache pref. castout bufsz */ +#define XCHAL_PREFETCH_ENTRIES 0 /* cache prefetch entries */ +#define XCHAL_PREFETCH_BLOCK_ENTRIES 0 /* prefetch block streams */ +#define XCHAL_HAVE_CACHE_BLOCKOPS 0 /* block prefetch for caches */ +#define XCHAL_HAVE_ICACHE_TEST 1 /* Icache test instructions */ +#define XCHAL_HAVE_DCACHE_TEST 1 /* Dcache test instructions */ +#define XCHAL_HAVE_ICACHE_DYN_WAYS 0 /* Icache dynamic way support */ +#define XCHAL_HAVE_DCACHE_DYN_WAYS 0 /* Dcache dynamic way support */ + + + + +/**************************************************************************** + Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code + ****************************************************************************/ + + +#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */ + +/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */ + +/* Number of cache sets in log2(lines per way): */ +#define XCHAL_ICACHE_SETWIDTH 7 +#define XCHAL_DCACHE_SETWIDTH 7 + +/* Cache set associativity (number of ways): */ +#define XCHAL_ICACHE_WAYS 2 +#define XCHAL_DCACHE_WAYS 2 + +/* Cache features: */ +#define XCHAL_ICACHE_LINE_LOCKABLE 1 +#define XCHAL_DCACHE_LINE_LOCKABLE 1 +#define XCHAL_ICACHE_ECC_PARITY 0 +#define XCHAL_DCACHE_ECC_PARITY 0 + +/* Cache access size in bytes (affects operation of SICW instruction): */ +#define XCHAL_ICACHE_ACCESS_SIZE 4 +#define XCHAL_DCACHE_ACCESS_SIZE 4 + +#define XCHAL_DCACHE_BANKS 1 /* number of banks */ + +/* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */ +#define XCHAL_CA_BITS 4 + +/* Whether MEMCTL register has anything useful */ +#define XCHAL_USE_MEMCTL (((XCHAL_LOOP_BUFFER_SIZE > 0) || \ + XCHAL_DCACHE_IS_COHERENT || \ + XCHAL_HAVE_ICACHE_DYN_WAYS || \ + XCHAL_HAVE_DCACHE_DYN_WAYS) && \ + (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RE_2012_0)) + + +/*---------------------------------------------------------------------- + INTERNAL I/D RAM/ROMs and XLMI + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */ +#define XCHAL_NUM_INSTRAM 1 /* number of core instr. RAMs */ +#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */ +#define XCHAL_NUM_DATARAM 1 /* number of core data RAMs */ +#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/ +#define XCHAL_NUM_XLMI 1 /* number of core XLMI ports */ + +/* Instruction RAM 0: */ +#define XCHAL_INSTRAM0_VADDR 0x40000000 /* virtual address */ +#define XCHAL_INSTRAM0_PADDR 0x40000000 /* physical address */ +#define XCHAL_INSTRAM0_SIZE 131072 /* size in bytes */ +#define XCHAL_INSTRAM0_ECC_PARITY 0 /* ECC/parity type, 0=none */ + +/* Data RAM 0: */ +#define XCHAL_DATARAM0_VADDR 0x3FFE0000 /* virtual address */ +#define XCHAL_DATARAM0_PADDR 0x3FFE0000 /* physical address */ +#define XCHAL_DATARAM0_SIZE 131072 /* size in bytes */ +#define XCHAL_DATARAM0_ECC_PARITY 0 /* ECC/parity type, 0=none */ +#define XCHAL_DATARAM0_BANKS 1 /* number of banks */ + +/* XLMI Port 0: */ +#define XCHAL_XLMI0_VADDR 0x3FFC0000 /* virtual address */ +#define XCHAL_XLMI0_PADDR 0x3FFC0000 /* physical address */ +#define XCHAL_XLMI0_SIZE 131072 /* size in bytes */ +#define XCHAL_XLMI0_ECC_PARITY 0 /* ECC/parity type, 0=none */ + +#define XCHAL_HAVE_IMEM_LOADSTORE 1 /* can load/store to IROM/IRAM*/ + + +/*---------------------------------------------------------------------- + INTERRUPTS and TIMERS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */ +#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */ +#define XCHAL_HAVE_NMI 1 /* non-maskable interrupt */ +#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */ +#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ +#define XCHAL_NUM_INTERRUPTS 22 /* number of interrupts */ +#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */ +#define XCHAL_NUM_EXTINTERRUPTS 17 /* num of external interrupts */ +#define XCHAL_NUM_INTLEVELS 6 /* number of interrupt levels + (not including level zero) */ +#define XCHAL_EXCM_LEVEL 3 /* level masked by PS.EXCM */ + /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */ + +/* Masks of interrupts at each interrupt level: */ +#define XCHAL_INTLEVEL1_MASK 0x001F80FF +#define XCHAL_INTLEVEL2_MASK 0x00000100 +#define XCHAL_INTLEVEL3_MASK 0x00200E00 +#define XCHAL_INTLEVEL4_MASK 0x00001000 +#define XCHAL_INTLEVEL5_MASK 0x00002000 +#define XCHAL_INTLEVEL6_MASK 0x00000000 +#define XCHAL_INTLEVEL7_MASK 0x00004000 + +/* Masks of interrupts at each range 1..n of interrupt levels: */ +#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x001F80FF +#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x001F81FF +#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x003F8FFF +#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x003F9FFF +#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x003FBFFF +#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x003FBFFF +#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x003FFFFF + +/* Level of each interrupt: */ +#define XCHAL_INT0_LEVEL 1 +#define XCHAL_INT1_LEVEL 1 +#define XCHAL_INT2_LEVEL 1 +#define XCHAL_INT3_LEVEL 1 +#define XCHAL_INT4_LEVEL 1 +#define XCHAL_INT5_LEVEL 1 +#define XCHAL_INT6_LEVEL 1 +#define XCHAL_INT7_LEVEL 1 +#define XCHAL_INT8_LEVEL 2 +#define XCHAL_INT9_LEVEL 3 +#define XCHAL_INT10_LEVEL 3 +#define XCHAL_INT11_LEVEL 3 +#define XCHAL_INT12_LEVEL 4 +#define XCHAL_INT13_LEVEL 5 +#define XCHAL_INT14_LEVEL 7 +#define XCHAL_INT15_LEVEL 1 +#define XCHAL_INT16_LEVEL 1 +#define XCHAL_INT17_LEVEL 1 +#define XCHAL_INT18_LEVEL 1 +#define XCHAL_INT19_LEVEL 1 +#define XCHAL_INT20_LEVEL 1 +#define XCHAL_INT21_LEVEL 3 +#define XCHAL_DEBUGLEVEL 6 /* debug interrupt level */ +#define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */ +#define XCHAL_NMILEVEL 7 /* NMI "level" (for use with + EXCSAVE/EPS/EPC_n, RFI n) */ + +/* Type of each interrupt: */ +#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT6_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT7_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT11_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT12_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT13_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT14_TYPE XTHAL_INTTYPE_NMI +#define XCHAL_INT15_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT16_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT17_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT18_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT19_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT20_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT21_TYPE XTHAL_INTTYPE_EXTERN_EDGE + +/* Masks of interrupts for each type of interrupt: */ +#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFC00000 +#define XCHAL_INTTYPE_MASK_SOFTWARE 0x00000880 +#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x003F8000 +#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000133F +#define XCHAL_INTTYPE_MASK_TIMER 0x00002440 +#define XCHAL_INTTYPE_MASK_NMI 0x00004000 +#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000 +#define XCHAL_INTTYPE_MASK_PROFILING 0x00000000 + +/* Interrupt numbers assigned to specific interrupt sources: */ +#define XCHAL_TIMER0_INTERRUPT 6 /* CCOMPARE0 */ +#define XCHAL_TIMER1_INTERRUPT 10 /* CCOMPARE1 */ +#define XCHAL_TIMER2_INTERRUPT 13 /* CCOMPARE2 */ +#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED +#define XCHAL_NMI_INTERRUPT 14 /* non-maskable interrupt */ + +/* Interrupt numbers for levels at which only one interrupt is configured: */ +#define XCHAL_INTLEVEL2_NUM 8 +#define XCHAL_INTLEVEL4_NUM 12 +#define XCHAL_INTLEVEL5_NUM 13 +#define XCHAL_INTLEVEL7_NUM 14 +/* (There are many interrupts each at level(s) 1, 3.) */ + + +/* + * External interrupt mapping. + * These macros describe how Xtensa processor interrupt numbers + * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) + * map to external BInterrupt<n> pins, for those interrupts + * configured as external (level-triggered, edge-triggered, or NMI). + * See the Xtensa processor databook for more details. + */ + +/* Core interrupt numbers mapped to each EXTERNAL BInterrupt pin number: */ +#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ +#define XCHAL_EXTINT1_NUM 1 /* (intlevel 1) */ +#define XCHAL_EXTINT2_NUM 2 /* (intlevel 1) */ +#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ +#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ +#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ +#define XCHAL_EXTINT6_NUM 8 /* (intlevel 2) */ +#define XCHAL_EXTINT7_NUM 9 /* (intlevel 3) */ +#define XCHAL_EXTINT8_NUM 12 /* (intlevel 4) */ +#define XCHAL_EXTINT9_NUM 14 /* (intlevel 7) */ +#define XCHAL_EXTINT10_NUM 15 /* (intlevel 1) */ +#define XCHAL_EXTINT11_NUM 16 /* (intlevel 1) */ +#define XCHAL_EXTINT12_NUM 17 /* (intlevel 1) */ +#define XCHAL_EXTINT13_NUM 18 /* (intlevel 1) */ +#define XCHAL_EXTINT14_NUM 19 /* (intlevel 1) */ +#define XCHAL_EXTINT15_NUM 20 /* (intlevel 1) */ +#define XCHAL_EXTINT16_NUM 21 /* (intlevel 3) */ +/* EXTERNAL BInterrupt pin numbers mapped to each core interrupt number: */ +#define XCHAL_INT0_EXTNUM 0 /* (intlevel 1) */ +#define XCHAL_INT1_EXTNUM 1 /* (intlevel 1) */ +#define XCHAL_INT2_EXTNUM 2 /* (intlevel 1) */ +#define XCHAL_INT3_EXTNUM 3 /* (intlevel 1) */ +#define XCHAL_INT4_EXTNUM 4 /* (intlevel 1) */ +#define XCHAL_INT5_EXTNUM 5 /* (intlevel 1) */ +#define XCHAL_INT8_EXTNUM 6 /* (intlevel 2) */ +#define XCHAL_INT9_EXTNUM 7 /* (intlevel 3) */ +#define XCHAL_INT12_EXTNUM 8 /* (intlevel 4) */ +#define XCHAL_INT14_EXTNUM 9 /* (intlevel 7) */ +#define XCHAL_INT15_EXTNUM 10 /* (intlevel 1) */ +#define XCHAL_INT16_EXTNUM 11 /* (intlevel 1) */ +#define XCHAL_INT17_EXTNUM 12 /* (intlevel 1) */ +#define XCHAL_INT18_EXTNUM 13 /* (intlevel 1) */ +#define XCHAL_INT19_EXTNUM 14 /* (intlevel 1) */ +#define XCHAL_INT20_EXTNUM 15 /* (intlevel 1) */ +#define XCHAL_INT21_EXTNUM 16 /* (intlevel 3) */ + + +/*---------------------------------------------------------------------- + EXCEPTIONS and VECTORS + ----------------------------------------------------------------------*/ + +#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture + number: 1 == XEA1 (old) + 2 == XEA2 (new) + 0 == XEAX (extern) or TX */ +#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */ +#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */ +#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */ +#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */ +#define XCHAL_HAVE_HALT 0 /* halt architecture option */ +#define XCHAL_HAVE_BOOTLOADER 0 /* boot loader (for TX) */ +#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */ +#define XCHAL_HAVE_VECTOR_SELECT 1 /* relocatable vectors */ +#define XCHAL_HAVE_VECBASE 1 /* relocatable vectors */ +#define XCHAL_VECBASE_RESET_VADDR 0x60000000 /* VECBASE reset value */ +#define XCHAL_VECBASE_RESET_PADDR 0x60000000 +#define XCHAL_RESET_VECBASE_OVERLAP 0 + +#define XCHAL_RESET_VECTOR0_VADDR 0x50000000 +#define XCHAL_RESET_VECTOR0_PADDR 0x50000000 +#define XCHAL_RESET_VECTOR1_VADDR 0x40000400 +#define XCHAL_RESET_VECTOR1_PADDR 0x40000400 +#define XCHAL_RESET_VECTOR_VADDR 0x50000000 +#define XCHAL_RESET_VECTOR_PADDR 0x50000000 +#define XCHAL_USER_VECOFS 0x00000340 +#define XCHAL_USER_VECTOR_VADDR 0x60000340 +#define XCHAL_USER_VECTOR_PADDR 0x60000340 +#define XCHAL_KERNEL_VECOFS 0x00000300 +#define XCHAL_KERNEL_VECTOR_VADDR 0x60000300 +#define XCHAL_KERNEL_VECTOR_PADDR 0x60000300 +#define XCHAL_DOUBLEEXC_VECOFS 0x000003C0 +#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0x600003C0 +#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x600003C0 +#define XCHAL_WINDOW_OF4_VECOFS 0x00000000 +#define XCHAL_WINDOW_UF4_VECOFS 0x00000040 +#define XCHAL_WINDOW_OF8_VECOFS 0x00000080 +#define XCHAL_WINDOW_UF8_VECOFS 0x000000C0 +#define XCHAL_WINDOW_OF12_VECOFS 0x00000100 +#define XCHAL_WINDOW_UF12_VECOFS 0x00000140 +#define XCHAL_WINDOW_VECTORS_VADDR 0x60000000 +#define XCHAL_WINDOW_VECTORS_PADDR 0x60000000 +#define XCHAL_INTLEVEL2_VECOFS 0x00000180 +#define XCHAL_INTLEVEL2_VECTOR_VADDR 0x60000180 +#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x60000180 +#define XCHAL_INTLEVEL3_VECOFS 0x000001C0 +#define XCHAL_INTLEVEL3_VECTOR_VADDR 0x600001C0 +#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x600001C0 +#define XCHAL_INTLEVEL4_VECOFS 0x00000200 +#define XCHAL_INTLEVEL4_VECTOR_VADDR 0x60000200 +#define XCHAL_INTLEVEL4_VECTOR_PADDR 0x60000200 +#define XCHAL_INTLEVEL5_VECOFS 0x00000240 +#define XCHAL_INTLEVEL5_VECTOR_VADDR 0x60000240 +#define XCHAL_INTLEVEL5_VECTOR_PADDR 0x60000240 +#define XCHAL_INTLEVEL6_VECOFS 0x00000280 +#define XCHAL_INTLEVEL6_VECTOR_VADDR 0x60000280 +#define XCHAL_INTLEVEL6_VECTOR_PADDR 0x60000280 +#define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL6_VECOFS +#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR +#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL6_VECTOR_PADDR +#define XCHAL_NMI_VECOFS 0x000002C0 +#define XCHAL_NMI_VECTOR_VADDR 0x600002C0 +#define XCHAL_NMI_VECTOR_PADDR 0x600002C0 +#define XCHAL_INTLEVEL7_VECOFS XCHAL_NMI_VECOFS +#define XCHAL_INTLEVEL7_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR +#define XCHAL_INTLEVEL7_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR + + +/*---------------------------------------------------------------------- + DEBUG MODULE + ----------------------------------------------------------------------*/ + +/* Misc */ +#define XCHAL_HAVE_DEBUG_ERI 1 /* ERI to debug module */ +#define XCHAL_HAVE_DEBUG_APB 0 /* APB to debug module */ +#define XCHAL_HAVE_DEBUG_JTAG 1 /* JTAG to debug module */ + +/* On-Chip Debug (OCD) */ +#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */ +#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ +#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ +#define XCHAL_HAVE_OCD_DIR_ARRAY 0 /* faster OCD option (to LX4) */ +#define XCHAL_HAVE_OCD_LS32DDR 1 /* L32DDR/S32DDR (faster OCD) */ + +/* TRAX (in core) */ +#define XCHAL_HAVE_TRAX 1 /* TRAX in debug module */ +#define XCHAL_TRAX_MEM_SIZE 262144 /* TRAX memory size in bytes */ +#define XCHAL_TRAX_MEM_SHAREABLE 0 /* start/end regs; ready sig. */ +#define XCHAL_TRAX_ATB_WIDTH 0 /* ATB width (bits), 0=no ATB */ +#define XCHAL_TRAX_TIME_WIDTH 0 /* timestamp bitwidth, 0=none */ + +/* Perf counters */ +#define XCHAL_NUM_PERF_COUNTERS 0 /* performance counters */ + + +/*---------------------------------------------------------------------- + MMU + ----------------------------------------------------------------------*/ + +/* See core-matmap.h header file for more details. */ + +#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */ +#define XCHAL_HAVE_SPANNING_WAY 1 /* one way maps I+D 4GB vaddr */ +#define XCHAL_SPANNING_WAY 0 /* TLB spanning way number */ +#define XCHAL_HAVE_IDENTITY_MAP 1 /* vaddr == paddr always */ +#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */ +#define XCHAL_HAVE_MIMIC_CACHEATTR 1 /* region protection */ +#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */ +#define XCHAL_HAVE_PTP_MMU 0 /* full MMU (with page table + [autorefill] and protection) + usable for an MMU-based OS */ +/* If none of the above last 4 are set, it's a custom TLB configuration. */ + +#define XCHAL_MMU_ASID_BITS 0 /* number of bits in ASIDs */ +#define XCHAL_MMU_RINGS 1 /* number of rings (1..4) */ +#define XCHAL_MMU_RING_BITS 0 /* num of bits in RING field */ + +#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */ + + +#endif /* _XTENSA_CORE_CONFIGURATION_H */ + diff --git a/arch/xtensa/variants/de212/include/variant/tie-asm.h b/arch/xtensa/variants/de212/include/variant/tie-asm.h new file mode 100644 index 000000000000..77755354f571 --- /dev/null +++ b/arch/xtensa/variants/de212/include/variant/tie-asm.h @@ -0,0 +1,170 @@ +/* + * tie-asm.h -- compile-time HAL assembler definitions dependent on CORE & TIE + * + * NOTE: This header file is not meant to be included directly. + */ + +/* This header file contains assembly-language definitions (assembly + macros, etc.) for this specific Xtensa processor's TIE extensions + and options. It is customized to this Xtensa processor configuration. + + Copyright (c) 1999-2015 Cadence Design Systems Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_TIE_ASM_H +#define _XTENSA_CORE_TIE_ASM_H + +/* Selection parameter values for save-area save/restore macros: */ +/* Option vs. TIE: */ +#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */ +#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */ +#define XTHAL_SAS_ANYOT 0x0003 /* both of the above */ +/* Whether used automatically by compiler: */ +#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */ +#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */ +#define XTHAL_SAS_ANYCC 0x000C /* both of the above */ +/* ABI handling across function calls: */ +#define XTHAL_SAS_CALR 0x0010 /* caller-saved */ +#define XTHAL_SAS_CALE 0x0020 /* callee-saved */ +#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */ +#define XTHAL_SAS_ANYABI 0x0070 /* all of the above three */ +/* Misc */ +#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */ +#define XTHAL_SAS3(optie,ccuse,abi) ( ((optie) & XTHAL_SAS_ANYOT) \ + | ((ccuse) & XTHAL_SAS_ANYCC) \ + | ((abi) & XTHAL_SAS_ANYABI) ) + + + /* + * Macro to store all non-coprocessor (extra) custom TIE and optional state + * (not including zero-overhead loop registers). + * Required parameters: + * ptr Save area pointer address register (clobbered) + * (register must contain a 4 byte aligned address). + * at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS + * registers are clobbered, the remaining are unused). + * Optional parameters: + * continue If macro invoked as part of a larger store sequence, set to 1 + * if this is not the first in the sequence. Defaults to 0. + * ofs Offset from start of larger sequence (from value of first ptr + * in sequence) at which to store. Defaults to next available space + * (or 0 if <continue> is 0). + * select Select what category(ies) of registers to store, as a bitmask + * (see XTHAL_SAS_xxx constants). Defaults to all registers. + * alloc Select what category(ies) of registers to allocate; if any + * category is selected here that is not in <select>, space for + * the corresponding registers is skipped without doing any store. + */ + .macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0 + xchal_sa_start \continue, \ofs + // Optional caller-saved registers used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1016, 4, 4 + rsr.ACCLO \at1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+0 + rsr.ACCHI \at1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1016, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .endif + // Optional caller-saved registers not used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1004, 4, 4 + rsr.SCOMPARE1 \at1 // conditional store option + s32i \at1, \ptr, .Lxchal_ofs_+0 + rsr.M0 \at1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+4 + rsr.M1 \at1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+8 + rsr.M2 \at1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+12 + rsr.M3 \at1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+16 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 20 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1004, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 20 + .endif + .endm // xchal_ncp_store + + /* + * Macro to load all non-coprocessor (extra) custom TIE and optional state + * (not including zero-overhead loop registers). + * Required parameters: + * ptr Save area pointer address register (clobbered) + * (register must contain a 4 byte aligned address). + * at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS + * registers are clobbered, the remaining are unused). + * Optional parameters: + * continue If macro invoked as part of a larger load sequence, set to 1 + * if this is not the first in the sequence. Defaults to 0. + * ofs Offset from start of larger sequence (from value of first ptr + * in sequence) at which to load. Defaults to next available space + * (or 0 if <continue> is 0). + * select Select what category(ies) of registers to load, as a bitmask + * (see XTHAL_SAS_xxx constants). Defaults to all registers. + * alloc Select what category(ies) of registers to allocate; if any + * category is selected here that is not in <select>, space for + * the corresponding registers is skipped without doing any load. + */ + .macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0 + xchal_sa_start \continue, \ofs + // Optional caller-saved registers used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1016, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_+0 + wsr.ACCLO \at1 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+4 + wsr.ACCHI \at1 // MAC16 option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1016, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .endif + // Optional caller-saved registers not used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1004, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_+0 + wsr.SCOMPARE1 \at1 // conditional store option + l32i \at1, \ptr, .Lxchal_ofs_+4 + wsr.M0 \at1 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+8 + wsr.M1 \at1 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+12 + wsr.M2 \at1 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+16 + wsr.M3 \at1 // MAC16 option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 20 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1004, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 20 + .endif + .endm // xchal_ncp_load + + +#define XCHAL_NCP_NUM_ATMPS 1 + +#define XCHAL_SA_NUM_ATMPS 1 + +#endif /*_XTENSA_CORE_TIE_ASM_H*/ + diff --git a/arch/xtensa/variants/de212/include/variant/tie.h b/arch/xtensa/variants/de212/include/variant/tie.h new file mode 100644 index 000000000000..b8a061a3fa10 --- /dev/null +++ b/arch/xtensa/variants/de212/include/variant/tie.h @@ -0,0 +1,136 @@ +/* + * tie.h -- compile-time HAL definitions dependent on CORE & TIE configuration + * + * NOTE: This header file is not meant to be included directly. + */ + +/* This header file describes this specific Xtensa processor's TIE extensions + that extend basic Xtensa core functionality. It is customized to this + Xtensa processor configuration. + + Copyright (c) 1999-2015 Cadence Design Systems Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_TIE_H +#define _XTENSA_CORE_TIE_H + +#define XCHAL_CP_NUM 0 /* number of coprocessors */ +#define XCHAL_CP_MAX 0 /* max CP ID + 1 (0 if none) */ +#define XCHAL_CP_MASK 0x00 /* bitmask of all CPs by ID */ +#define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */ + +/* Save area for non-coprocessor optional and custom (TIE) state: */ +#define XCHAL_NCP_SA_SIZE 28 +#define XCHAL_NCP_SA_ALIGN 4 + +/* Total save area for optional and custom state (NCP + CPn): */ +#define XCHAL_TOTAL_SA_SIZE 32 /* with 16-byte align padding */ +#define XCHAL_TOTAL_SA_ALIGN 4 /* actual minimum alignment */ + +/* + * Detailed contents of save areas. + * NOTE: caller must define the XCHAL_SA_REG macro (not defined here) + * before expanding the XCHAL_xxx_SA_LIST() macros. + * + * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize, + * dbnum,base,regnum,bitsz,gapsz,reset,x...) + * + * s = passed from XCHAL_*_LIST(s), eg. to select how to expand + * ccused = set if used by compiler without special options or code + * abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global) + * kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg) + * opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg) + * name = lowercase reg name (no quotes) + * galign = group byte alignment (power of 2) (galign >= align) + * align = register byte alignment (power of 2) + * asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz) + * (not including any pad bytes required to galign this or next reg) + * dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>) + * base = reg shortname w/o index (or sr=special, ur=TIE user reg) + * regnum = reg index in regfile, or special/TIE-user reg number + * bitsz = number of significant bits (regfile width, or ur/sr mask bits) + * gapsz = intervening bits, if bitsz bits not stored contiguously + * (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize) + * reset = register reset value (or 0 if undefined at reset) + * x = reserved for future use (0 until then) + * + * To filter out certain registers, e.g. to expand only the non-global + * registers used by the compiler, you can do something like this: + * + * #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p) + * #define SELCC0(p...) + * #define SELCC1(abikind,p...) SELAK##abikind(p) + * #define SELAK0(p...) REG(p) + * #define SELAK1(p...) REG(p) + * #define SELAK2(p...) + * #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \ + * ...what you want to expand... + */ + +#define XCHAL_NCP_SA_NUM 7 +#define XCHAL_NCP_SA_LIST(s) \ + XCHAL_SA_REG(s,1,0,0,1, acclo, 4, 4, 4,0x0210, sr,16 , 32,0,0,0) \ + XCHAL_SA_REG(s,1,0,0,1, acchi, 4, 4, 4,0x0211, sr,17 , 8,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m0, 4, 4, 4,0x0220, sr,32 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m1, 4, 4, 4,0x0221, sr,33 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m2, 4, 4, 4,0x0222, sr,34 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m3, 4, 4, 4,0x0223, sr,35 , 32,0,0,0) + +#define XCHAL_CP0_SA_NUM 0 +#define XCHAL_CP0_SA_LIST(s) /* empty */ + +#define XCHAL_CP1_SA_NUM 0 +#define XCHAL_CP1_SA_LIST(s) /* empty */ + +#define XCHAL_CP2_SA_NUM 0 +#define XCHAL_CP2_SA_LIST(s) /* empty */ + +#define XCHAL_CP3_SA_NUM 0 +#define XCHAL_CP3_SA_LIST(s) /* empty */ + +#define XCHAL_CP4_SA_NUM 0 +#define XCHAL_CP4_SA_LIST(s) /* empty */ + +#define XCHAL_CP5_SA_NUM 0 +#define XCHAL_CP5_SA_LIST(s) /* empty */ + +#define XCHAL_CP6_SA_NUM 0 +#define XCHAL_CP6_SA_LIST(s) /* empty */ + +#define XCHAL_CP7_SA_NUM 0 +#define XCHAL_CP7_SA_LIST(s) /* empty */ + +/* Byte length of instruction from its first nibble (op0 field), per FLIX. */ +#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3 +/* Byte length of instruction from its first byte, per FLIX. */ +#define XCHAL_BYTE0_FORMAT_LENGTHS \ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3 + +#endif /*_XTENSA_CORE_TIE_H*/ + |