diff options
Diffstat (limited to 'arch')
147 files changed, 3134 insertions, 1208 deletions
diff --git a/arch/alpha/kernel/module.c b/arch/alpha/kernel/module.c index fc271e316a38..aac6d4b22f7a 100644 --- a/arch/alpha/kernel/module.c +++ b/arch/alpha/kernel/module.c @@ -47,7 +47,7 @@ module_free(struct module *mod, void *module_region) struct got_entry { struct got_entry *next; - Elf64_Addr r_offset; + Elf64_Sxword r_addend; int got_offset; }; @@ -57,14 +57,14 @@ process_reloc_for_got(Elf64_Rela *rela, { unsigned long r_sym = ELF64_R_SYM (rela->r_info); unsigned long r_type = ELF64_R_TYPE (rela->r_info); - Elf64_Addr r_offset = rela->r_offset; + Elf64_Sxword r_addend = rela->r_addend; struct got_entry *g; if (r_type != R_ALPHA_LITERAL) return; for (g = chains + r_sym; g ; g = g->next) - if (g->r_offset == r_offset) { + if (g->r_addend == r_addend) { if (g->got_offset == 0) { g->got_offset = *poffset; *poffset += 8; @@ -74,7 +74,7 @@ process_reloc_for_got(Elf64_Rela *rela, g = kmalloc (sizeof (*g), GFP_KERNEL); g->next = chains[r_sym].next; - g->r_offset = r_offset; + g->r_addend = r_addend; g->got_offset = *poffset; *poffset += 8; chains[r_sym].next = g; diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 167fd89f8707..2b034182a0ca 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -974,6 +974,7 @@ osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, size_t size; long timeout; int ret = -EINVAL; + struct fdtable *fdt; timeout = MAX_SCHEDULE_TIMEOUT; if (tvp) { @@ -995,7 +996,8 @@ osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, } } - if (n < 0 || n > current->files->max_fdset) + fdt = files_fdtable(current->files); + if (n < 0 || n > fdt->max_fdset) goto out_nofds; /* diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c index 804727853d25..e32fee505220 100644 --- a/arch/alpha/kernel/sys_marvel.c +++ b/arch/alpha/kernel/sys_marvel.c @@ -373,12 +373,11 @@ marvel_map_irq(struct pci_dev *dev, u8 slot, u8 pin) irq += 0x80; /* offset for lsi */ #if 1 - printk("PCI:%d:%d:%d (hose %d) [%s] is using MSI\n", + printk("PCI:%d:%d:%d (hose %d) is using MSI\n", dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), - hose->index, - pci_pretty_name (dev)); + hose->index); printk(" %d message(s) from 0x%04x\n", 1 << ((msg_ctl & PCI_MSI_FLAGS_QSIZE) >> 4), msg_dat); diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 51f430cc2fbf..2786f7c34b3f 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -541,6 +541,103 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info) return ret; } +#ifdef CONFIG_PM + +struct locomo_save_data { + u16 LCM_GPO; + u16 LCM_SPICT; + u16 LCM_GPE; + u16 LCM_ASD; + u16 LCM_SPIMD; +}; + +static int locomo_suspend(struct device *dev, u32 pm_message_t, u32 level) +{ + struct locomo *lchip = dev_get_drvdata(dev); + struct locomo_save_data *save; + unsigned long flags; + + if (level != SUSPEND_DISABLE) + return 0; + + save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL); + if (!save) + return -ENOMEM; + + dev->power.saved_state = (void *) save; + + spin_lock_irqsave(&lchip->lock, flags); + + save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */ + locomo_writel(0x00, lchip->base + LOCOMO_GPO); + save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPICT); /* SPI */ + locomo_writel(0x40, lchip->base + LOCOMO_SPICT); + save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */ + locomo_writel(0x00, lchip->base + LOCOMO_GPE); + save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */ + locomo_writel(0x00, lchip->base + LOCOMO_ASD); + save->LCM_SPIMD = locomo_readl(lchip->base + LOCOMO_SPIMD); /* SPI */ + locomo_writel(0x3C14, lchip->base + LOCOMO_SPIMD); + + locomo_writel(0x00, lchip->base + LOCOMO_PAIF); + locomo_writel(0x00, lchip->base + LOCOMO_DAC); + locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC); + + if ( (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88) ) + locomo_writel(0x00, lchip->base + LOCOMO_C32K); /* CLK32 off */ + else + /* 18MHz already enabled, so no wait */ + locomo_writel(0xc1, lchip->base + LOCOMO_C32K); /* CLK32 on */ + + locomo_writel(0x00, lchip->base + LOCOMO_TADC); /* 18MHz clock off*/ + locomo_writel(0x00, lchip->base + LOCOMO_AUDIO + LOCOMO_ACC); /* 22MHz/24MHz clock off */ + locomo_writel(0x00, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); /* FL */ + + spin_unlock_irqrestore(&lchip->lock, flags); + + return 0; +} + +static int locomo_resume(struct device *dev, u32 level) +{ + struct locomo *lchip = dev_get_drvdata(dev); + struct locomo_save_data *save; + unsigned long r; + unsigned long flags; + + if (level != RESUME_ENABLE) + return 0; + + save = (struct locomo_save_data *) dev->power.saved_state; + if (!save) + return 0; + + spin_lock_irqsave(&lchip->lock, flags); + + locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO); + locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPICT); + locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE); + locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD); + locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPIMD); + + locomo_writel(0x00, lchip->base + LOCOMO_C32K); + locomo_writel(0x90, lchip->base + LOCOMO_TADC); + + locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KSC); + r = locomo_readl(lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC); + r &= 0xFEFF; + locomo_writel(r, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC); + locomo_writel(0x1, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KCMD); + + spin_unlock_irqrestore(&lchip->lock, flags); + + dev->power.saved_state = NULL; + kfree(save); + + return 0; +} +#endif + /** * locomo_probe - probe for a single LoCoMo chip. * @phys_addr: physical address of device. @@ -707,6 +804,10 @@ static struct device_driver locomo_device_driver = { .bus = &platform_bus_type, .probe = locomo_probe, .remove = locomo_remove, +#ifdef CONFIG_PM + .suspend = locomo_suspend, + .resume = locomo_resume, +#endif }; /* diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 96a794d8de84..756348bf5170 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-git4 -# Wed Jun 22 15:56:42 2005 +# Linux kernel version: 2.6.13-git8 +# Thu Sep 8 19:24:02 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -22,6 +22,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -31,6 +32,7 @@ CONFIG_SYSCTL=y # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -88,7 +90,9 @@ CONFIG_ARCH_S3C2410=y # # S3C24XX Implementations # +CONFIG_MACH_ANUBIS=y CONFIG_ARCH_BAST=y +CONFIG_BAST_PC104_IRQ=y CONFIG_ARCH_H1940=y CONFIG_MACH_N30=y CONFIG_ARCH_SMDK2410=y @@ -112,6 +116,7 @@ CONFIG_S3C2410_DMA=y # CONFIG_S3C2410_DMA_DEBUG is not set # CONFIG_S3C2410_PM_DEBUG is not set # CONFIG_S3C2410_PM_CHECK is not set +CONFIG_PM_SIMTEC=y CONFIG_S3C2410_LOWLEVEL_UART_PORT=0 # @@ -149,7 +154,15 @@ CONFIG_ISA_DMA_API=y # # CONFIG_SMP is not set # CONFIG_PREEMPT is not set -# CONFIG_DISCONTIGMEM is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_ALIGNMENT_TRAP=y # @@ -186,6 +199,74 @@ CONFIG_PM=y CONFIG_APM=y # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -258,6 +339,7 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_IMPA7 is not set CONFIG_MTD_BAST=y CONFIG_MTD_BAST_MAXSIZE=4 +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -312,7 +394,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -354,6 +435,7 @@ CONFIG_BLK_DEV_IDE_BAST=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -376,70 +458,8 @@ CONFIG_BLK_DEV_IDE_BAST=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options +# Network device support # -# CONFIG_PACKET is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -447,6 +467,11 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y @@ -480,6 +505,8 @@ CONFIG_DM9000=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -562,7 +589,6 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -605,7 +631,6 @@ CONFIG_S3C2410_RTC=y # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # @@ -628,7 +653,7 @@ CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # -# CONFIG_I2C_ISA is not set +CONFIG_I2C_ISA=m # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set CONFIG_I2C_S3C2410=y @@ -636,14 +661,33 @@ CONFIG_I2C_S3C2410=y # CONFIG_I2C_PCA_ISA is not set # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=m +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=m +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +CONFIG_HWMON_VID=m # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set @@ -662,27 +706,21 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # -# Other I2C Chip support +# Misc devices # -# CONFIG_SENSORS_DS1337 is not set -CONFIG_SENSORS_EEPROM=m -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # -# Misc devices +# Multimedia Capabilities Port drivers # # @@ -731,7 +769,7 @@ CONFIG_DUMMY_CONSOLE=y # USB support # CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # @@ -749,6 +787,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -758,6 +797,7 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # # XFS support @@ -765,6 +805,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -791,11 +832,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -812,8 +853,7 @@ CONFIG_JFFS_FS_VERBOSE=0 # CONFIG_JFFS_PROC_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -835,6 +875,7 @@ CONFIG_NFS_FS=y # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -920,6 +961,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_DEBUG_KERNEL=y # CONFIG_MAGIC_SYSRQ is not set CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c index 112f1d68fb2b..e216ab8b9e8f 100644 --- a/arch/arm/mach-clps7500/core.c +++ b/arch/arm/mach-clps7500/core.c @@ -354,7 +354,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 23c4da10101b..5aeadfd72143 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -219,7 +219,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/arch/arm/mach-epxa10db/arch.c b/arch/arm/mach-epxa10db/arch.c index 7daa021676d0..44c56571d183 100644 --- a/arch/arm/mach-epxa10db/arch.c +++ b/arch/arm/mach-epxa10db/arch.c @@ -52,7 +52,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/arch/arm/mach-footbridge/isa.c b/arch/arm/mach-footbridge/isa.c index aa3a1fef563e..28846c7edaaf 100644 --- a/arch/arm/mach-footbridge/isa.c +++ b/arch/arm/mach-footbridge/isa.c @@ -34,7 +34,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c index 4b3199319e68..a4a7c0125d03 100644 --- a/arch/arm/mach-h720x/cpu-h7202.c +++ b/arch/arm/mach-h720x/cpu-h7202.c @@ -90,7 +90,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 098c817a7fb8..74bd2fd602d4 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -174,7 +174,7 @@ static struct resource ixp2000_uart_resource = { static struct platform_device ixp2000_serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = ixp2000_serial_port, }, diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index 8b2f25322452..050c92768913 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -66,7 +66,7 @@ static struct plat_serial8250_port coyote_uart_data[] = { static struct platform_device coyote_uart = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = coyote_uart_data, }, diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index 3fd92c5cbaa8..29a6d02fa851 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -93,7 +93,7 @@ static struct plat_serial8250_port gtwx5715_uart_platform_data[] = { static struct platform_device gtwx5715_uart_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = gtwx5715_uart_platform_data, }, diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 6c14ff3c23a0..ae1fa099d5fa 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -96,7 +96,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = { static struct platform_device ixdp425_uart = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev.platform_data = ixdp425_uart_data, .num_resources = 2, .resource = ixdp425_uart_resources diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 7408ac94f771..27fc2e8e5fca 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -47,6 +47,14 @@ config MACH_OMAP_OSK TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here if you have such a board. +config OMAP_OSK_MISTRAL + bool "Mistral QVGA board Support" + depends on MACH_OMAP_OSK + help + The OSK supports an optional add-on board with a Quarter-VGA + touchscreen, PDA-ish buttons, a resume button, bicolor LED, + and camera connector. Say Y here if you have this board. + config MACH_OMAP_PERSEUS2 bool "TI Perseus2" depends on ARCH_OMAP1 && ARCH_OMAP730 diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index d386fd913f0c..181a93deaaee 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := io.o id.o irq.o time.o serial.o +obj-y := io.o id.o irq.o time.o serial.o devices.o led-y := leds.o # Specific board support @@ -23,6 +23,7 @@ endif # LEDs support led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o +led-$(CONFIG_MACH_OMAP_H3) += leds-h2p2-debug.o led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 122796ebe8f5..c209c7172a9a 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -48,19 +48,43 @@ static struct omap_usb_config generic1510_usb_config __initdata = { #if defined(CONFIG_ARCH_OMAP16XX) static struct omap_usb_config generic1610_usb_config __initdata = { +#ifdef CONFIG_USB_OTG + .otg = 1, +#endif .register_host = 1, .register_dev = 1, .hmc_mode = 16, .pins[0] = 6, }; + +static struct omap_mmc_config generic_mmc_config __initdata = { + .mmc [0] = { + .enabled = 0, + .wire4 = 0, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, + .mmc [1] = { + .enabled = 0, + .wire4 = 0, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, +}; + #endif static struct omap_board_config_kernel generic_config[] = { { OMAP_TAG_USB, NULL }, + { OMAP_TAG_MMC, &generic_mmc_config }, }; static void __init omap_generic_init(void) { + const struct omap_uart_config *uart_conf; + /* * Make sure the serial ports are muxed on at this point. * You have to mux them off in device drivers later on @@ -76,6 +100,18 @@ static void __init omap_generic_init(void) generic_config[0].data = &generic1610_usb_config; } #endif + + uart_conf = omap_get_config(OMAP_TAG_UART, struct omap_uart_config); + if (uart_conf != NULL) { + unsigned int enabled_ports, i; + + enabled_ports = uart_conf->enabled_uarts; + for (i = 0; i < 3; i++) { + if (!(enabled_ports & (1 << i))) + generic_serial_ports[i] = 0; + } + } + omap_board_config = generic_config; omap_board_config_size = ARRAY_SIZE(generic_config); omap_serial_init(generic_serial_ports); @@ -83,7 +119,7 @@ static void __init omap_generic_init(void) static void __init omap_generic_map_io(void) { - omap_map_common_io() + omap_map_common_io(); } MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index f4983ee95ab4..d46a70063b0c 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -33,6 +33,7 @@ #include <asm/mach/map.h> #include <asm/arch/gpio.h> +#include <asm/arch/mux.h> #include <asm/arch/tc.h> #include <asm/arch/usb.h> #include <asm/arch/common.h> @@ -80,8 +81,7 @@ static struct flash_platform_data h2_flash_data = { }; static struct resource h2_flash_resource = { - .start = OMAP_CS2B_PHYS, - .end = OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1, + /* This is on CS3, wherever it's mapped */ .flags = IORESOURCE_MEM, }; @@ -126,10 +126,9 @@ static void __init h2_init_smc91x(void) printk("Error requesting gpio 0 for smc91x irq\n"); return; } - omap_set_gpio_edge_ctrl(0, OMAP_GPIO_FALLING_EDGE); } -void h2_init_irq(void) +static void __init h2_init_irq(void) { omap_init_irq(); omap_gpio_init(); @@ -152,9 +151,13 @@ static struct omap_usb_config h2_usb_config __initdata = { }; static struct omap_mmc_config h2_mmc_config __initdata = { - .mmc_blocks = 1, - .mmc1_power_pin = -1, /* tps65010 gpio3 */ - .mmc1_switch_pin = OMAP_MPUIO(1), + .mmc [0] = { + .enabled = 1, + .wire4 = 1, + .wp_pin = OMAP_MPUIO(3), + .power_pin = -1, /* tps65010 gpio3 */ + .switch_pin = OMAP_MPUIO(1), + }, }; static struct omap_board_config_kernel h2_config[] = { @@ -164,6 +167,16 @@ static struct omap_board_config_kernel h2_config[] = { static void __init h2_init(void) { + /* NOTE: revC boards support NAND-boot, which can put NOR on CS2B + * and NAND (either 16bit or 8bit) on CS3. + */ + h2_flash_resource.end = h2_flash_resource.start = omap_cs3_phys(); + h2_flash_resource.end += SZ_32M - 1; + + /* MMC: card detect and WP */ + // omap_cfg_reg(U19_ARMIO1); /* CD */ + omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */ + platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); omap_board_config = h2_config; omap_board_config_size = ARRAY_SIZE(h2_config); diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 7cd419d61b40..2798613696fa 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -82,8 +82,7 @@ static struct flash_platform_data h3_flash_data = { }; static struct resource h3_flash_resource = { - .start = OMAP_CS2B_PHYS, - .end = OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1, + /* This is on CS3, wherever it's mapped */ .flags = IORESOURCE_MEM, }; @@ -161,13 +160,26 @@ static struct omap_usb_config h3_usb_config __initdata = { .pins[1] = 3, }; +static struct omap_mmc_config h3_mmc_config __initdata = { + .mmc[0] = { + .enabled = 1, + .power_pin = -1, /* tps65010 GPIO4 */ + .switch_pin = OMAP_MPUIO(1), + }, +}; + static struct omap_board_config_kernel h3_config[] = { { OMAP_TAG_USB, &h3_usb_config }, + { OMAP_TAG_MMC, &h3_mmc_config }, }; static void __init h3_init(void) { + h3_flash_resource.end = h3_flash_resource.start = omap_cs3_phys(); + h3_flash_resource.end += OMAP_CS3_SIZE - 1; (void) platform_add_devices(devices, ARRAY_SIZE(devices)); + omap_board_config = h3_config; + omap_board_config_size = ARRAY_SIZE(h3_config); } static void __init h3_init_smc91x(void) @@ -177,7 +189,6 @@ static void __init h3_init_smc91x(void) printk("Error requesting gpio 40 for smc91x irq\n"); return; } - omap_set_gpio_edge_ctrl(40, OMAP_GPIO_FALLING_EDGE); } void h3_init_irq(void) diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 91de60a91ef8..df0312b596e4 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -29,6 +29,7 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> +#include <asm/arch/mux.h> #include <asm/arch/fpga.h> #include <asm/arch/gpio.h> #include <asm/arch/tc.h> @@ -173,7 +174,6 @@ static void __init innovator_init_smc91x(void) printk("Error requesting gpio 0 for smc91x irq\n"); return; } - omap_set_gpio_edge_ctrl(0, OMAP_GPIO_RISING_EDGE); } } @@ -220,8 +220,19 @@ static struct omap_usb_config h2_usb_config __initdata = { }; #endif +static struct omap_mmc_config innovator_mmc_config __initdata = { + .mmc [0] = { + .enabled = 1, + .wire4 = 1, + .wp_pin = OMAP_MPUIO(3), + .power_pin = -1, /* FPGA F3 UIO42 */ + .switch_pin = -1, /* FPGA F4 UIO43 */ + }, +}; + static struct omap_board_config_kernel innovator_config[] = { { OMAP_TAG_USB, NULL }, + { OMAP_TAG_MMC, &innovator_mmc_config }, }; static void __init innovator_init(void) diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c index 6750b2014092..d904e643f5ec 100644 --- a/arch/arm/mach-omap1/board-netstar.c +++ b/arch/arm/mach-omap1/board-netstar.c @@ -75,16 +75,15 @@ static void __init netstar_init(void) mdelay(50); /* 50ms until PHY ready */ /* smc91x interrupt pin */ omap_request_gpio(8); - omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE); omap_request_gpio(12); omap_request_gpio(13); omap_request_gpio(14); omap_request_gpio(15); - omap_set_gpio_edge_ctrl(12, OMAP_GPIO_FALLING_EDGE); - omap_set_gpio_edge_ctrl(13, OMAP_GPIO_FALLING_EDGE); - omap_set_gpio_edge_ctrl(14, OMAP_GPIO_FALLING_EDGE); - omap_set_gpio_edge_ctrl(15, OMAP_GPIO_FALLING_EDGE); + set_irq_type(OMAP_GPIO_IRQ(12), IRQT_FALLING); + set_irq_type(OMAP_GPIO_IRQ(13), IRQT_FALLING); + set_irq_type(OMAP_GPIO_IRQ(14), IRQT_FALLING); + set_irq_type(OMAP_GPIO_IRQ(15), IRQT_FALLING); platform_add_devices(netstar_devices, ARRAY_SIZE(netstar_devices)); diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 6844e536c698..21103df50415 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -29,11 +29,16 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/interrupt.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> #include <asm/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/flash.h> #include <asm/arch/gpio.h> #include <asm/arch/usb.h> @@ -41,12 +46,56 @@ #include <asm/arch/tc.h> #include <asm/arch/common.h> -static struct map_desc osk5912_io_desc[] __initdata = { -{ OMAP_OSK_NOR_FLASH_BASE, OMAP_OSK_NOR_FLASH_START, OMAP_OSK_NOR_FLASH_SIZE, - MT_DEVICE }, +static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0}; + +static struct mtd_partition osk_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = 0, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } }; -static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0}; +static struct flash_platform_data osk_flash_data = { + .map_name = "cfi_probe", + .width = 2, + .parts = osk_partitions, + .nr_parts = ARRAY_SIZE(osk_partitions), +}; + +static struct resource osk_flash_resource = { + /* this is on CS3, wherever it's mapped */ + .flags = IORESOURCE_MEM, +}; + +static struct platform_device osk5912_flash_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &osk_flash_data, + }, + .num_resources = 1, + .resource = &osk_flash_resource, +}; static struct resource osk5912_smc91x_resources[] = { [0] = { @@ -86,9 +135,16 @@ static struct platform_device osk5912_cf_device = { .resource = osk5912_cf_resources, }; +static struct platform_device osk5912_mcbsp1_device = { + .name = "omap_mcbsp", + .id = 1, +}; + static struct platform_device *osk5912_devices[] __initdata = { + &osk5912_flash_device, &osk5912_smc91x_device, &osk5912_cf_device, + &osk5912_mcbsp1_device, }; static void __init osk_init_smc91x(void) @@ -97,7 +153,6 @@ static void __init osk_init_smc91x(void) printk("Error requesting gpio 0 for smc91x irq\n"); return; } - omap_set_gpio_edge_ctrl(0, OMAP_GPIO_RISING_EDGE); /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */ EMIFS_CCS(1) |= 0x2; @@ -110,11 +165,11 @@ static void __init osk_init_cf(void) printk("Error requesting gpio 62 for CF irq\n"); return; } - /* it's really active-low */ - omap_set_gpio_edge_ctrl(62, OMAP_GPIO_FALLING_EDGE); + /* the CF I/O IRQ is really active-low */ + set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING); } -void osk_init_irq(void) +static void __init osk_init_irq(void) { omap_init_irq(); omap_gpio_init(); @@ -142,18 +197,69 @@ static struct omap_board_config_kernel osk_config[] = { { OMAP_TAG_USB, &osk_usb_config }, }; +#ifdef CONFIG_OMAP_OSK_MISTRAL + +#ifdef CONFIG_PM +static irqreturn_t +osk_mistral_wake_interrupt(int irq, void *ignored, struct pt_regs *regs) +{ + return IRQ_HANDLED; +} +#endif + +static void __init osk_mistral_init(void) +{ + /* FIXME here's where to feed in framebuffer, touchpad, and + * keyboard setup ... not in the drivers for those devices! + * + * NOTE: we could actually tell if there's a Mistral board + * attached, e.g. by trying to read something from the ads7846. + * But this is too early for that... + */ + + /* the sideways button (SW1) is for use as a "wakeup" button */ + omap_cfg_reg(N15_1610_MPUIO2); + if (omap_request_gpio(OMAP_MPUIO(2)) == 0) { + int ret = 0; + omap_set_gpio_direction(OMAP_MPUIO(2), 1); + set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING); +#ifdef CONFIG_PM + /* share the IRQ in case someone wants to use the + * button for more than wakeup from system sleep. + */ + ret = request_irq(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), + &osk_mistral_wake_interrupt, + SA_SHIRQ, "mistral_wakeup", + &osk_mistral_wake_interrupt); + if (ret != 0) { + omap_free_gpio(OMAP_MPUIO(2)); + printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n", + ret); + } else + enable_irq_wake(OMAP_GPIO_IRQ(OMAP_MPUIO(2))); +#endif + } else + printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n"); +} +#else +static void __init osk_mistral_init(void) { } +#endif + static void __init osk_init(void) { + osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys(); + osk_flash_resource.end += SZ_32M - 1; platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices)); omap_board_config = osk_config; omap_board_config_size = ARRAY_SIZE(osk_config); USB_TRANSCEIVER_CTRL_REG |= (3 << 1); + + osk_mistral_init(); } static void __init osk_map_io(void) { omap_map_common_io(); - iotable_init(osk5912_io_desc, ARRAY_SIZE(osk5912_io_desc)); omap_serial_init(osk_serial_ports); } diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 213317392d9b..107c68c8ab54 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -24,6 +24,7 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> +#include <asm/arch/tc.h> #include <asm/arch/gpio.h> #include <asm/arch/mux.h> #include <asm/arch/fpga.h> @@ -83,8 +84,8 @@ static struct flash_platform_data p2_flash_data = { }; static struct resource p2_flash_resource = { - .start = OMAP_FLASH_0_START, - .end = OMAP_FLASH_0_START + OMAP_FLASH_0_SIZE - 1, + .start = OMAP_CS0_PHYS, + .end = OMAP_CS0_PHYS + SZ_32M - 1, .flags = IORESOURCE_MEM, }; diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index e42281988990..bf30b1acda0b 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -25,13 +25,14 @@ #include <asm/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/mach/flash.h> #include <asm/mach/map.h> +#include <asm/arch/common.h> #include <asm/arch/gpio.h> -#include <asm/arch/tc.h> #include <asm/arch/mux.h> +#include <asm/arch/tc.h> #include <asm/arch/usb.h> -#include <asm/arch/common.h> extern void omap_init_time(void); extern int omap_gpio_init(void); @@ -74,7 +75,7 @@ static struct plat_serial8250_port voiceblue_ports[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 1, + .id = PLAT8250_DEV_PLATFORM1, .dev = { .platform_data = voiceblue_ports, }, @@ -86,6 +87,27 @@ static int __init ext_uart_init(void) } arch_initcall(ext_uart_init); +static struct flash_platform_data voiceblue_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource voiceblue_flash_resource = { + .start = OMAP_CS0_PHYS, + .end = OMAP_CS0_PHYS + SZ_32M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device voiceblue_flash_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &voiceblue_flash_data, + }, + .num_resources = 1, + .resource = &voiceblue_flash_resource, +}; + static struct resource voiceblue_smc91x_resources[] = { [0] = { .start = OMAP_CS2_PHYS + 0x300, @@ -107,6 +129,7 @@ static struct platform_device voiceblue_smc91x_device = { }; static struct platform_device *voiceblue_devices[] __initdata = { + &voiceblue_flash_device, &voiceblue_smc91x_device, }; @@ -119,8 +142,17 @@ static struct omap_usb_config voiceblue_usb_config __initdata = { .pins[2] = 6, }; +static struct omap_mmc_config voiceblue_mmc_config __initdata = { + .mmc[0] = { + .enabled = 1, + .power_pin = 2, + .switch_pin = -1, + }, +}; + static struct omap_board_config_kernel voiceblue_config[] = { { OMAP_TAG_USB, &voiceblue_usb_config }, + { OMAP_TAG_MMC, &voiceblue_mmc_config }, }; static void __init voiceblue_init_irq(void) @@ -131,9 +163,6 @@ static void __init voiceblue_init_irq(void) static void __init voiceblue_init(void) { - /* There is a good chance board is going up, so enable Power LED - * (it is connected through invertor) */ - omap_writeb(0x00, OMAP_LPG1_LCR); /* Watchdog */ omap_request_gpio(0); /* smc91x reset */ @@ -145,7 +174,6 @@ static void __init voiceblue_init(void) mdelay(50); /* 50ms until PHY ready */ /* smc91x interrupt pin */ omap_request_gpio(8); - omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE); /* 16C554 reset*/ omap_request_gpio(6); omap_set_gpio_direction(6, 0); @@ -155,14 +183,19 @@ static void __init voiceblue_init(void) omap_request_gpio(13); omap_request_gpio(14); omap_request_gpio(15); - omap_set_gpio_edge_ctrl(12, OMAP_GPIO_RISING_EDGE); - omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE); - omap_set_gpio_edge_ctrl(14, OMAP_GPIO_RISING_EDGE); - omap_set_gpio_edge_ctrl(15, OMAP_GPIO_RISING_EDGE); + set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); omap_board_config = voiceblue_config; omap_board_config_size = ARRAY_SIZE(voiceblue_config); + + /* There is a good chance board is going up, so enable power LED + * (it is connected through invertor) */ + omap_writeb(0x00, OMAP_LPG1_LCR); + omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ } static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; @@ -184,9 +217,9 @@ static int panic_event(struct notifier_block *this, unsigned long event, if (test_and_set_bit(MACHINE_PANICED, &machine_state)) return NOTIFY_DONE; - /* Flash Power LED - * (TODO: Enable clock right way (enabled in bootloader already)) */ + /* Flash power LED */ omap_writeb(0x78, OMAP_LPG1_LCR); + omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */ return NOTIFY_DONE; } @@ -195,15 +228,14 @@ static struct notifier_block panic_block = { .notifier_call = panic_event, }; -static int __init setup_notifier(void) +static int __init voiceblue_setup(void) { /* Setup panic notifier */ notifier_chain_register(&panic_notifier_list, &panic_block); return 0; } - -postcore_initcall(setup_notifier); +postcore_initcall(voiceblue_setup); static int wdt_gpio_state; diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c new file mode 100644 index 000000000000..e8b3981444cd --- /dev/null +++ b/arch/arm/mach-omap1/devices.c @@ -0,0 +1,351 @@ +/* + * linux/arch/arm/mach-omap1/devices.c + * + * OMAP1 platform device setup/initialization + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/mach-types.h> +#include <asm/mach/map.h> + +#include <asm/arch/tc.h> +#include <asm/arch/board.h> +#include <asm/arch/mux.h> +#include <asm/arch/gpio.h> + + +static void omap_nop_release(struct device *dev) +{ + /* Nothing */ +} + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) + +#define OMAP_I2C_BASE 0xfffb3800 + +static struct resource i2c_resources[] = { + { + .start = OMAP_I2C_BASE, + .end = OMAP_I2C_BASE + 0x3f, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_I2C, + .flags = IORESOURCE_IRQ, + }, +}; + +/* DMA not used; works around erratum writing to non-empty i2c fifo */ + +static struct platform_device omap_i2c_device = { + .name = "i2c_omap", + .id = -1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(i2c_resources), + .resource = i2c_resources, +}; + +static void omap_init_i2c(void) +{ + /* FIXME define and use a boot tag, in case of boards that + * either don't wire up I2C, or chips that mux it differently... + * it can include clocking and address info, maybe more. + */ + omap_cfg_reg(I2C_SCL); + omap_cfg_reg(I2C_SDA); + + (void) platform_device_register(&omap_i2c_device); +} +#else +static inline void omap_init_i2c(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_OMAP1610_IR) || defined(CONFIG_OMAP161O_IR_MODULE) + +static u64 irda_dmamask = 0xffffffff; + +static struct platform_device omap1610ir_device = { + .name = "omap1610-ir", + .id = -1, + .dev = { + .release = omap_nop_release, + .dma_mask = &irda_dmamask, + }, +}; + +static void omap_init_irda(void) +{ + /* FIXME define and use a boot tag, members something like: + * u8 uart; // uart1, or uart3 + * ... but driver only handles uart3 for now + * s16 fir_sel; // gpio for SIR vs FIR + * ... may prefer a callback for SIR/MIR/FIR mode select; + * while h2 uses a GPIO, H3 uses a gpio expander + */ + if (machine_is_omap_h2() + || machine_is_omap_h3()) + (void) platform_device_register(&omap1610ir_device); +} +#else +static inline void omap_init_irda(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) + +#define OMAP_MMC1_BASE 0xfffb7800 +#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */ + +static struct omap_mmc_conf mmc1_conf; + +static u64 mmc1_dmamask = 0xffffffff; + +static struct resource mmc1_resources[] = { + { + .start = IO_ADDRESS(OMAP_MMC1_BASE), + .end = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_MMC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mmc_omap_device1 = { + .name = "mmci-omap", + .id = 1, + .dev = { + .release = omap_nop_release, + .dma_mask = &mmc1_dmamask, + .platform_data = &mmc1_conf, + }, + .num_resources = ARRAY_SIZE(mmc1_resources), + .resource = mmc1_resources, +}; + +#ifdef CONFIG_ARCH_OMAP16XX + +static struct omap_mmc_conf mmc2_conf; + +static u64 mmc2_dmamask = 0xffffffff; + +static struct resource mmc2_resources[] = { + { + .start = IO_ADDRESS(OMAP_MMC2_BASE), + .end = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_1610_MMC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mmc_omap_device2 = { + .name = "mmci-omap", + .id = 2, + .dev = { + .release = omap_nop_release, + .dma_mask = &mmc2_dmamask, + .platform_data = &mmc2_conf, + }, + .num_resources = ARRAY_SIZE(mmc2_resources), + .resource = mmc2_resources, +}; +#endif + +static void __init omap_init_mmc(void) +{ + const struct omap_mmc_config *mmc_conf; + const struct omap_mmc_conf *mmc; + + /* NOTE: assumes MMC was never (wrongly) enabled */ + mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config); + if (!mmc_conf) + return; + + /* block 1 is always available and has just one pinout option */ + mmc = &mmc_conf->mmc[0]; + if (mmc->enabled) { + omap_cfg_reg(MMC_CMD); + omap_cfg_reg(MMC_CLK); + omap_cfg_reg(MMC_DAT0); + if (cpu_is_omap1710()) { + omap_cfg_reg(M15_1710_MMC_CLKI); + omap_cfg_reg(P19_1710_MMC_CMDDIR); + omap_cfg_reg(P20_1710_MMC_DATDIR0); + } + if (mmc->wire4) { + omap_cfg_reg(MMC_DAT1); + /* NOTE: DAT2 can be on W10 (here) or M15 */ + if (!mmc->nomux) + omap_cfg_reg(MMC_DAT2); + omap_cfg_reg(MMC_DAT3); + } + mmc1_conf = *mmc; + (void) platform_device_register(&mmc_omap_device1); + } + +#ifdef CONFIG_ARCH_OMAP16XX + /* block 2 is on newer chips, and has many pinout options */ + mmc = &mmc_conf->mmc[1]; + if (mmc->enabled) { + if (!mmc->nomux) { + omap_cfg_reg(Y8_1610_MMC2_CMD); + omap_cfg_reg(Y10_1610_MMC2_CLK); + omap_cfg_reg(R18_1610_MMC2_CLKIN); + omap_cfg_reg(W8_1610_MMC2_DAT0); + if (mmc->wire4) { + omap_cfg_reg(V8_1610_MMC2_DAT1); + omap_cfg_reg(W15_1610_MMC2_DAT2); + omap_cfg_reg(R10_1610_MMC2_DAT3); + } + + /* These are needed for the level shifter */ + omap_cfg_reg(V9_1610_MMC2_CMDDIR); + omap_cfg_reg(V5_1610_MMC2_DATDIR0); + omap_cfg_reg(W19_1610_MMC2_DATDIR1); + } + + /* Feedback clock must be set on OMAP-1710 MMC2 */ + if (cpu_is_omap1710()) + omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24), + MOD_CONF_CTRL_1); + mmc2_conf = *mmc; + (void) platform_device_register(&mmc_omap_device2); + } +#endif + return; +} +#else +static inline void omap_init_mmc(void) {} +#endif + +#if defined(CONFIG_OMAP_RTC) || defined(CONFIG_OMAP_RTC) + +#define OMAP_RTC_BASE 0xfffb4800 + +static struct resource rtc_resources[] = { + { + .start = OMAP_RTC_BASE, + .end = OMAP_RTC_BASE + 0x5f, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_RTC_TIMER, + .flags = IORESOURCE_IRQ, + }, + { + .start = INT_RTC_ALARM, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device omap_rtc_device = { + .name = "omap_rtc", + .id = -1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + +static void omap_init_rtc(void) +{ + (void) platform_device_register(&omap_rtc_device); +} +#else +static inline void omap_init_rtc(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_OMAP16XX_WATCHDOG) || defined(CONFIG_OMAP16XX_WATCHDOG_MODULE) + +#define OMAP_WDT_BASE 0xfffeb000 + +static struct resource wdt_resources[] = { + { + .start = OMAP_WDT_BASE, + .end = OMAP_WDT_BASE + 0x4f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_wdt_device = { + .name = "omap1610_wdt", + .id = -1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +static void omap_init_wdt(void) +{ + (void) platform_device_register(&omap_wdt_device); +} +#else +static inline void omap_init_wdt(void) {} +#endif + + +/*-------------------------------------------------------------------------*/ + +/* + * This gets called after board-specific INIT_MACHINE, and initializes most + * on-chip peripherals accessible on this board (except for few like USB): + * + * (a) Does any "standard config" pin muxing needed. Board-specific + * code will have muxed GPIO pins and done "nonstandard" setup; + * that code could live in the boot loader. + * (b) Populating board-specific platform_data with the data drivers + * rely on to handle wiring variations. + * (c) Creating platform devices as meaningful on this board and + * with this kernel configuration. + * + * Claiming GPIOs, and setting their direction and initial values, is the + * responsibility of the device drivers. So is responding to probe(). + * + * Board-specific knowlege like creating devices or pin setup is to be + * kept out of drivers as much as possible. In particular, pin setup + * may be handled by the boot loader, and drivers should expect it will + * normally have been done by the time they're probed. + */ +static int __init omap_init_devices(void) +{ + /* please keep these calls, and their implementations above, + * in alphabetical order so they're easier to sort through. + */ + omap_init_i2c(); + omap_init_irda(); + omap_init_mmc(); + omap_init_rtc(); + omap_init_wdt(); + + return 0; +} +arch_initcall(omap_init_devices); + diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index c12a78335625..aca2a120813a 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/fpga.c + * linux/arch/arm/mach-omap1/fpga.c * * Interrupt handler for OMAP-1510 Innovator FPGA * @@ -181,7 +181,7 @@ void omap1510_fpga_init_irq(void) */ omap_request_gpio(13); omap_set_gpio_direction(13, 1); - omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE); + set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING); set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux); } diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 207df0fe934d..eb8261d7dead 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -19,6 +19,7 @@ extern int clk_init(void); extern void omap_check_revision(void); +extern void omap_sram_init(void); /* * The machine specific code may provide the extra mapping besides the @@ -32,7 +33,6 @@ static struct map_desc omap_io_desc[] __initdata = { static struct map_desc omap730_io_desc[] __initdata = { { OMAP730_DSP_BASE, OMAP730_DSP_START, OMAP730_DSP_SIZE, MT_DEVICE }, { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE }, - { OMAP730_SRAM_BASE, OMAP730_SRAM_START, OMAP730_SRAM_SIZE, MT_DEVICE } }; #endif @@ -40,27 +40,13 @@ static struct map_desc omap730_io_desc[] __initdata = { static struct map_desc omap1510_io_desc[] __initdata = { { OMAP1510_DSP_BASE, OMAP1510_DSP_START, OMAP1510_DSP_SIZE, MT_DEVICE }, { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE }, - { OMAP1510_SRAM_BASE, OMAP1510_SRAM_START, OMAP1510_SRAM_SIZE, MT_DEVICE } }; #endif #if defined(CONFIG_ARCH_OMAP16XX) -static struct map_desc omap1610_io_desc[] __initdata = { +static struct map_desc omap16xx_io_desc[] __initdata = { { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE }, { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE }, - { OMAP16XX_SRAM_BASE, OMAP16XX_SRAM_START, OMAP1610_SRAM_SIZE, MT_DEVICE } -}; - -static struct map_desc omap5912_io_desc[] __initdata = { - { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE }, - { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE }, -/* - * The OMAP5912 has 250kByte internal SRAM. Because the mapping is baseed on page - * size (4kByte), it seems that the last 2kByte (=0x800) of the 250kByte are not mapped. - * Add additional 2kByte (0x800) so that the last page is mapped and the last 2kByte - * can be used. - */ - { OMAP16XX_SRAM_BASE, OMAP16XX_SRAM_START, OMAP5912_SRAM_SIZE + 0x800, MT_DEVICE } }; #endif @@ -86,14 +72,13 @@ static void __init _omap_map_io(void) } #endif #if defined(CONFIG_ARCH_OMAP16XX) - if (cpu_is_omap1610() || cpu_is_omap1710()) { - iotable_init(omap1610_io_desc, ARRAY_SIZE(omap1610_io_desc)); - } - if (cpu_is_omap5912()) { - iotable_init(omap5912_io_desc, ARRAY_SIZE(omap5912_io_desc)); + if (cpu_is_omap16xx()) { + iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc)); } #endif + omap_sram_init(); + /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort * on a Posted Write in the TIPB Bridge". */ @@ -108,8 +93,9 @@ static void __init _omap_map_io(void) /* * This should only get called from board specific init */ -void omap_map_common_io(void) +void __init omap_map_common_io(void) { if (!initialized) _omap_map_io(); } + diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index afd5d67e4ae7..192ce6055faa 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/irq.c + * linux/arch/arm/mach-omap1/irq.c * * Interrupt handler for all OMAP boards * diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index ec0d8285f243..be283cda63dd 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/leds-h2p2-debug.c + * linux/arch/arm/mach-omap1/leds-h2p2-debug.c * * Copyright 2003 by Texas Instruments Incorporated * @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/kernel_stat.h> #include <linux/sched.h> +#include <linux/version.h> #include <asm/io.h> #include <asm/hardware.h> diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c index 8043b7d0f66e..c8ffd1ddcded 100644 --- a/arch/arm/mach-omap1/leds-innovator.c +++ b/arch/arm/mach-omap1/leds-innovator.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/leds-innovator.c + * linux/arch/arm/mach-omap1/leds-innovator.c */ #include <linux/config.h> #include <linux/init.h> diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c index 4a0e8b9d4fc3..2c8bda847c18 100644 --- a/arch/arm/mach-omap1/leds-osk.c +++ b/arch/arm/mach-omap1/leds-osk.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/leds-osk.c + * linux/arch/arm/mach-omap1/leds-osk.c * * LED driver for OSK, and optionally Mistral QVGA, boards */ @@ -64,7 +64,7 @@ static void tps_work(void *unused) static DECLARE_WORK(work, tps_work, NULL); -#ifdef CONFIG_FB_OMAP +#ifdef CONFIG_OMAP_OSK_MISTRAL /* For now, all system indicators require the Mistral board, since that * LED can be manipulated without a task context. This LED is either red, @@ -127,7 +127,7 @@ void osk_leds_event(led_event_t evt) hw_led_state = 0; break; -#ifdef CONFIG_FB_OMAP +#ifdef CONFIG_OMAP_OSK_MISTRAL case led_timer: hw_led_state ^= TIMER_LED; @@ -144,7 +144,7 @@ void osk_leds_event(led_event_t evt) mistral_setled(); break; -#endif /* CONFIG_FB_OMAP */ +#endif /* CONFIG_OMAP_OSK_MISTRAL */ /* "green" == tps LED1 (leftmost, normally power-good) * works only with DC adapter, not on battery power! diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c index 8ab21fe98e1b..5c6b1bb6e722 100644 --- a/arch/arm/mach-omap1/leds.c +++ b/arch/arm/mach-omap1/leds.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/leds.c + * linux/arch/arm/mach-omap1/leds.c * * OMAP LEDs dispatcher */ @@ -20,7 +20,9 @@ omap_leds_init(void) if (machine_is_omap_innovator()) leds_event = innovator_leds_event; - else if (machine_is_omap_h2() || machine_is_omap_perseus2()) + else if (machine_is_omap_h2() + || machine_is_omap_h3() + || machine_is_omap_perseus2()) leds_event = h2p2_dbg_leds_event; else if (machine_is_omap_osk()) @@ -30,8 +32,12 @@ omap_leds_init(void) return -1; if (machine_is_omap_h2() + || machine_is_omap_h3() || machine_is_omap_perseus2() - || machine_is_omap_osk()) { +#ifdef CONFIG_OMAP_OSK_MISTRAL + || machine_is_omap_osk() +#endif + ) { /* LED1/LED2 pins can be used as GPIO (as done here), or by * the LPG (works even in deep sleep!), to drive a bicolor diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 214e5d17c8b5..40c4f7c40e73 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -24,7 +24,11 @@ #include <asm/arch/board.h> #include <asm/arch/mux.h> +#include <asm/arch/gpio.h> #include <asm/arch/fpga.h> +#ifdef CONFIG_PM +#include <asm/arch/pm.h> +#endif static struct clk * uart1_ck = NULL; static struct clk * uart2_ck = NULL; @@ -94,7 +98,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, @@ -193,6 +197,86 @@ void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS]) } } +#ifdef CONFIG_OMAP_SERIAL_WAKE + +static irqreturn_t omap_serial_wake_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + /* Need to do something with serial port right after wake-up? */ + return IRQ_HANDLED; +} + +/* + * Reroutes serial RX lines to GPIO lines for the duration of + * sleep to allow waking up the device from serial port even + * in deep sleep. + */ +void omap_serial_wake_trigger(int enable) +{ + if (!cpu_is_omap16xx()) + return; + + if (uart1_ck != NULL) { + if (enable) + omap_cfg_reg(V14_16XX_GPIO37); + else + omap_cfg_reg(V14_16XX_UART1_RX); + } + if (uart2_ck != NULL) { + if (enable) + omap_cfg_reg(R9_16XX_GPIO18); + else + omap_cfg_reg(R9_16XX_UART2_RX); + } + if (uart3_ck != NULL) { + if (enable) + omap_cfg_reg(L14_16XX_GPIO49); + else + omap_cfg_reg(L14_16XX_UART3_RX); + } +} + +static void __init omap_serial_set_port_wakeup(int gpio_nr) +{ + int ret; + + ret = omap_request_gpio(gpio_nr); + if (ret < 0) { + printk(KERN_ERR "Could not request UART wake GPIO: %i\n", + gpio_nr); + return; + } + omap_set_gpio_direction(gpio_nr, 1); + set_irq_type(OMAP_GPIO_IRQ(gpio_nr), IRQT_RISING); + ret = request_irq(OMAP_GPIO_IRQ(gpio_nr), &omap_serial_wake_interrupt, + 0, "serial wakeup", NULL); + if (ret) { + omap_free_gpio(gpio_nr); + printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n", + gpio_nr); + return; + } + enable_irq_wake(OMAP_GPIO_IRQ(gpio_nr)); +} + +static int __init omap_serial_wakeup_init(void) +{ + if (!cpu_is_omap16xx()) + return 0; + + if (uart1_ck != NULL) + omap_serial_set_port_wakeup(37); + if (uart2_ck != NULL) + omap_serial_set_port_wakeup(18); + if (uart3_ck != NULL) + omap_serial_set_port_wakeup(49); + + return 0; +} +late_initcall(omap_serial_wakeup_init); + +#endif /* CONFIG_OMAP_SERIAL_WAKE */ + static int __init omap_init(void) { return platform_device_register(&serial_device); diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index d540539c9bbb..191a9b1ee9b7 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -247,13 +247,6 @@ unsigned long long sched_clock(void) #define OMAP_32K_TIMER_TCR 0x04 #define OMAP_32K_TICKS_PER_HZ (32768 / HZ) -#if (32768 % HZ) != 0 -/* We cannot ignore modulo. - * Potential error can be as high as several percent. - */ -#define OMAP_32K_TICK_MODULO (32768 % HZ) -static unsigned modulo_count = 0; /* Counts 1/HZ units */ -#endif /* * TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1 @@ -296,13 +289,22 @@ static inline void omap_32k_timer_stop(void) } /* - * Rounds down to nearest usec + * Rounds down to nearest usec. Note that this will overflow for larger values. */ static inline unsigned long omap_32k_ticks_to_usecs(unsigned long ticks_32k) { return (ticks_32k * 5*5*5*5*5*5) >> 9; } +/* + * Rounds down to nearest nsec. + */ +static inline unsigned long long +omap_32k_ticks_to_nsecs(unsigned long ticks_32k) +{ + return (unsigned long long) ticks_32k * 1000 * 5*5*5*5*5*5 >> 9; +} + static unsigned long omap_32k_last_tick = 0; /* @@ -315,6 +317,15 @@ static unsigned long omap_32k_timer_gettimeoffset(void) } /* + * Returns current time from boot in nsecs. It's OK for this to wrap + * around for now, as it's just a relative time stamp. + */ +unsigned long long sched_clock(void) +{ + return omap_32k_ticks_to_nsecs(omap_32k_sync_timer_read()); +} + +/* * Timer interrupt for 32KHz timer. When dynamic tick is enabled, this * function is also called from other interrupts to remove latency * issues with dynamic tick. In the dynamic tick case, we need to lock @@ -330,19 +341,6 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, now = omap_32k_sync_timer_read(); while (now - omap_32k_last_tick >= OMAP_32K_TICKS_PER_HZ) { -#ifdef OMAP_32K_TICK_MODULO - /* Modulo addition may put omap_32k_last_tick ahead of now - * and cause unwanted repetition of the while loop. - */ - if (unlikely(now - omap_32k_last_tick == ~0)) - break; - - modulo_count += OMAP_32K_TICK_MODULO; - if (modulo_count > HZ) { - ++omap_32k_last_tick; - modulo_count -= HZ; - } -#endif omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ; timer_tick(regs); } diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 8ccffba0018f..366a9bde3d8b 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -22,7 +22,7 @@ #include <asm/arch/corgi.h> #include <asm/arch/pxa-regs.h> -static spinlock_t corgi_ssp_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(corgi_ssp_lock); static struct ssp_dev corgi_ssp_dev; static struct ssp_state corgi_ssp_state; diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index a10268618f74..e3587efec4bf 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -140,7 +140,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c index 4664bd11adc1..0077937a7ab8 100644 --- a/arch/arm/mach-s3c2410/devs.c +++ b/arch/arm/mach-s3c2410/devs.c @@ -29,7 +29,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> - +#include <asm/arch/fb.h> #include <asm/hardware.h> #include <asm/io.h> #include <asm/irq.h> @@ -103,6 +103,15 @@ struct platform_device s3c_device_lcd = { EXPORT_SYMBOL(s3c_device_lcd); +static struct s3c2410fb_mach_info s3c2410fb_info; + +void __init set_s3c2410fb_info(struct s3c2410fb_mach_info *hard_s3c2410fb_info) +{ + memcpy(&s3c2410fb_info,hard_s3c2410fb_info,sizeof(struct s3c2410fb_mach_info)); + s3c_device_lcd.dev.platform_data = &s3c2410fb_info; +} +EXPORT_SYMBOL(set_s3c2410fb_info); + /* NAND Controller */ static struct resource s3c_nand_resource[] = { diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index e9182242da95..1a3367da6408 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -381,7 +381,7 @@ static struct plat_serial8250_port bast_sio_data[] = { static struct platform_device bast_sio = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = &bast_sio_data, }, diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index ea4fb1a97a50..6ff1889fbd21 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -45,6 +45,9 @@ //#include <asm/debug-ll.h> #include <asm/arch/regs-serial.h> +#include <asm/arch/regs-lcd.h> + +#include <asm/arch/fb.h> #include <linux/serial_core.h> @@ -88,6 +91,48 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] = { +/** + * Set lcd on or off + **/ +static struct s3c2410fb_mach_info h1940_lcdcfg __initdata = { + .fixed_syncs= 1, + .regs={ + .lcdcon1= S3C2410_LCDCON1_TFT16BPP | \ + S3C2410_LCDCON1_TFT | \ + S3C2410_LCDCON1_CLKVAL(0x0C), + + .lcdcon2= S3C2410_LCDCON2_VBPD(7) | \ + S3C2410_LCDCON2_LINEVAL(319) | \ + S3C2410_LCDCON2_VFPD(6) | \ + S3C2410_LCDCON2_VSPW(0), + + .lcdcon3= S3C2410_LCDCON3_HBPD(19) | \ + S3C2410_LCDCON3_HOZVAL(239) | \ + S3C2410_LCDCON3_HFPD(7), + + .lcdcon4= S3C2410_LCDCON4_MVAL(0) | \ + S3C2410_LCDCON4_HSPW(3), + + .lcdcon5= S3C2410_LCDCON5_FRM565 | \ + S3C2410_LCDCON5_INVVLINE | \ + S3C2410_LCDCON5_HWSWP, + }, + .lpcsel= 0x02, + .gpccon= 0xaa940659, + .gpccon_mask= 0xffffffff, + .gpcup= 0x0000ffff, + .gpcup_mask= 0xffffffff, + .gpdcon= 0xaa84aaa0, + .gpdcon_mask= 0xffffffff, + .gpdup= 0x0000faff, + .gpdup_mask= 0xffffffff, + + .width= 240, + .height= 320, + .xres= {240,240,240}, + .yres= {320,320,320}, + .bpp= {16,16,16}, +}; static struct platform_device *h1940_devices[] __initdata = { &s3c_device_usb, @@ -116,6 +161,11 @@ void __init h1940_init_irq(void) } +void __init h1940_init(void) +{ + set_s3c2410fb_info(&h1940_lcdcfg); +} + MACHINE_START(H1940, "IPAQ-H1940") /* Maintainer: Ben Dooks <ben@fluff.org> */ .phys_ram = S3C2410_SDRAM_PA, @@ -124,5 +174,6 @@ MACHINE_START(H1940, "IPAQ-H1940") .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = h1940_map_io, .init_irq = h1940_init_irq, + .init_machine = h1940_init, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 924e8464c212..8f9ab2893df4 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -221,7 +221,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index e737eae4521f..946c0d11c73b 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -41,7 +41,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 191788fb18d1..b0208c992576 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -16,6 +16,58 @@ #include <asm/tlbflush.h> #ifdef CONFIG_CPU_CACHE_VIPT + +void flush_cache_mm(struct mm_struct *mm) +{ + if (cache_is_vivt()) { + if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) + __cpuc_flush_user_all(); + return; + } + + if (cache_is_vipt_aliasing()) { + asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c5, 0\n" + " mcr p15, 0, %0, c7, c10, 4" + : + : "r" (0) + : "cc"); + } +} + +void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) +{ + if (cache_is_vivt()) { + if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) + __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end), + vma->vm_flags); + return; + } + + if (cache_is_vipt_aliasing()) { + asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c5, 0\n" + " mcr p15, 0, %0, c7, c10, 4" + : + : "r" (0) + : "cc"); + } +} + +void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn) +{ + if (cache_is_vivt()) { + if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) { + unsigned long addr = user_addr & PAGE_MASK; + __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags); + } + return; + } + + if (cache_is_vipt_aliasing()) + flush_pfn_alias(pfn, user_addr); +} + #define ALIAS_FLUSH_START 0xffff4000 #define TOP_PTE(x) pte_offset_kernel(top_pmd, x) diff --git a/arch/i386/boot/video.S b/arch/i386/boot/video.S index 0587477c99f2..92f669470142 100644 --- a/arch/i386/boot/video.S +++ b/arch/i386/boot/video.S @@ -97,6 +97,7 @@ #define PARAM_VESAPM_OFF 0x30 #define PARAM_LFB_PAGES 0x32 #define PARAM_VESA_ATTRIB 0x34 +#define PARAM_CAPABILITIES 0x36 /* Define DO_STORE according to CONFIG_VIDEO_RETAIN */ #ifdef CONFIG_VIDEO_RETAIN @@ -233,6 +234,10 @@ mopar_gr: movw 18(%di), %ax movl %eax, %fs:(PARAM_LFB_SIZE) +# store mode capabilities + movl 10(%di), %eax + movl %eax, %fs:(PARAM_CAPABILITIES) + # switching the DAC to 8-bit is for <= 8 bpp only movw %fs:(PARAM_LFB_DEPTH), %ax cmpw $8, %ax @@ -1944,7 +1949,7 @@ store_edid: movw $0x4f15, %ax # do VBE/DDC movw $0x01, %bx movw $0x00, %cx - movw $0x01, %dx + movw $0x00, %dx movw $0x140, %di int $0x10 diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index bf02b5026e62..8ef38544453c 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -467,11 +467,11 @@ static void __init longhaul_setup_voltagescaling(void) } if (vrmrev==0) { - dprintk ("VRM 8.5 \n"); + dprintk ("VRM 8.5\n"); memcpy (voltage_table, vrm85scales, sizeof(voltage_table)); numvscales = (voltage_table[maxvid]-voltage_table[minvid])/25; } else { - dprintk ("Mobile VRM \n"); + dprintk ("Mobile VRM\n"); memcpy (voltage_table, mobilevrmscales, sizeof(voltage_table)); numvscales = (voltage_table[maxvid]-voltage_table[minvid])/5; } diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index 327a55d4d1c6..c397b6220430 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -259,7 +259,7 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy) if (model->op_points == NULL) { /* Matched a non-match */ - dprintk(KERN_INFO PFX "no table support for CPU model \"%s\": \n", + dprintk(KERN_INFO PFX "no table support for CPU model \"%s\"\n", cpu->x86_model_id); #ifndef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI dprintk(KERN_INFO PFX "try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled\n"); @@ -402,7 +402,7 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) for (i=0; i<p.state_count; i++) { if (p.states[i].control != p.states[i].status) { - dprintk("Different control (%x) and status values (%x)\n", + dprintk("Different control (%llu) and status values (%llu)\n", p.states[i].control, p.states[i].status); result = -EINVAL; goto err_unreg; @@ -415,7 +415,7 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) } if (p.states[i].core_frequency > p.states[0].core_frequency) { - dprintk("P%u has larger frequency (%u) than P0 (%u), skipping\n", i, + dprintk("P%u has larger frequency (%llu) than P0 (%llu), skipping\n", i, p.states[i].core_frequency, p.states[0].core_frequency); p.states[i].core_frequency = 0; continue; @@ -498,13 +498,6 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) if (cpu->x86_vendor != X86_VENDOR_INTEL || !cpu_has(cpu, X86_FEATURE_EST)) return -ENODEV; - for (i = 0; i < N_IDS; i++) - if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) - break; - - if (i != N_IDS) - centrino_cpu[policy->cpu] = &cpu_ids[i]; - if (is_const_loops_cpu(policy->cpu)) { centrino_driver.flags |= CPUFREQ_CONST_LOOPS; } @@ -513,6 +506,13 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) if (policy->cpu != 0) return -ENODEV; + for (i = 0; i < N_IDS; i++) + if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) + break; + + if (i != N_IDS) + centrino_cpu[policy->cpu] = &cpu_ids[i]; + if (!centrino_cpu[policy->cpu]) { dprintk(KERN_INFO PFX "found unsupported CPU with " "Enhanced SpeedStep: send /proc/cpuinfo to " diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c index b25fb6b635ae..2718fb6f6aba 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c @@ -99,7 +99,7 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) u32 function = GET_SPEEDSTEP_FREQS; if (!(ist_info.event & 0xFFFF)) { - dprintk("bug #1422 -- can't read freqs from BIOS\n", result); + dprintk("bug #1422 -- can't read freqs from BIOS\n"); return -ENODEV; } diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 889eda2d7b17..1efdc76ae96d 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -1634,9 +1634,9 @@ void disable_IO_APIC(void) clear_IO_APIC(); /* - * If the i82559 is routed through an IOAPIC + * If the i8259 is routed through an IOAPIC * Put that IOAPIC in virtual wire mode - * so legacy interrups can be delivered. + * so legacy interrupts can be delivered. */ pin = find_isa_irq_pin(0, mp_ExtINT); if (pin != -1) { diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index cafaeffe3818..15949fd08109 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -122,8 +122,8 @@ static int MP_valid_apicid(int apicid, int version) static void __init MP_processor_info (struct mpc_config_processor *m) { - int ver, apicid, cpu, found_bsp = 0; - physid_mask_t tmp; + int ver, apicid; + physid_mask_t phys_cpu; if (!(m->mpc_cpuflag & CPU_ENABLED)) return; @@ -181,7 +181,6 @@ static void __init MP_processor_info (struct mpc_config_processor *m) if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { Dprintk(" Bootup CPU\n"); boot_cpu_physical_apicid = m->mpc_apicid; - found_bsp = 1; } if (num_processors >= NR_CPUS) { @@ -195,29 +194,26 @@ static void __init MP_processor_info (struct mpc_config_processor *m) " Processor ignored.\n", maxcpus); return; } - num_processors++; ver = m->mpc_apicver; if (!MP_valid_apicid(apicid, ver)) { printk(KERN_WARNING "Processor #%d INVALID. (Max ID: %d).\n", m->mpc_apicid, MAX_APICS); - --num_processors; return; } - if (found_bsp) - cpu = 0; - else - cpu = num_processors - 1; - cpu_set(cpu, cpu_possible_map); - tmp = apicid_to_cpu_present(apicid); - physids_or(phys_cpu_present_map, phys_cpu_present_map, tmp); - + cpu_set(num_processors, cpu_possible_map); + num_processors++; + phys_cpu = apicid_to_cpu_present(apicid); + physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu); + /* * Validate version */ if (ver == 0x0) { - printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! fixing up to 0x10. (tell your hw vendor)\n", m->mpc_apicid); + printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! " + "fixing up to 0x10. (tell your hw vendor)\n", + m->mpc_apicid); ver = 0x10; } apic_version[m->mpc_apicid] = ver; diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c index 340980203b09..7b6368bf8974 100644 --- a/arch/i386/kernel/ptrace.c +++ b/arch/i386/kernel/ptrace.c @@ -694,17 +694,22 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code) __attribute__((regparm(3))) int do_syscall_trace(struct pt_regs *regs, int entryexit) { - int is_sysemu = test_thread_flag(TIF_SYSCALL_EMU), ret = 0; - /* With TIF_SYSCALL_EMU set we want to ignore TIF_SINGLESTEP for syscall - * interception. */ + int is_sysemu = test_thread_flag(TIF_SYSCALL_EMU); + /* + * With TIF_SYSCALL_EMU set we want to ignore TIF_SINGLESTEP for syscall + * interception + */ int is_singlestep = !is_sysemu && test_thread_flag(TIF_SINGLESTEP); + int ret = 0; /* do the secure computing check first */ - secure_computing(regs->orig_eax); + if (!entryexit) + secure_computing(regs->orig_eax); if (unlikely(current->audit_context)) { if (entryexit) - audit_syscall_exit(current, AUDITSC_RESULT(regs->eax), regs->eax); + audit_syscall_exit(current, AUDITSC_RESULT(regs->eax), + regs->eax); /* Debug traps, when using PTRACE_SINGLESTEP, must be sent only * on the syscall exit path. Normally, when TIF_SYSCALL_AUDIT is * not used, entry.S will call us only on syscall exit, not @@ -738,7 +743,7 @@ int do_syscall_trace(struct pt_regs *regs, int entryexit) /* the 0x80 provides a way for the tracing parent to distinguish between a syscall stop and SIGTRAP delivery */ /* Note that the debugger could change the result of test_thread_flag!*/ - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0)); + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80:0)); /* * this isn't the same as continuing with a signal, but it will do @@ -750,7 +755,7 @@ int do_syscall_trace(struct pt_regs *regs, int entryexit) current->exit_code = 0; } ret = is_sysemu; - out: +out: if (unlikely(current->audit_context) && !entryexit) audit_syscall_entry(current, AUDIT_ARCH_I386, regs->orig_eax, regs->ebx, regs->ecx, regs->edx, regs->esi); @@ -759,6 +764,7 @@ int do_syscall_trace(struct pt_regs *regs, int entryexit) regs->orig_eax = -1; /* force skip of syscall restarting */ if (unlikely(current->audit_context)) - audit_syscall_exit(current, AUDITSC_RESULT(regs->eax), regs->eax); + audit_syscall_exit(current, AUDITSC_RESULT(regs->eax), + regs->eax); return 1; } diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index a659d274914c..f3d808451d25 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -139,6 +139,7 @@ struct sys_desc_table_struct { unsigned char table[0]; }; struct edid_info edid_info; +EXPORT_SYMBOL_GPL(edid_info); struct ist_info ist_info; #if defined(CONFIG_X86_SPEEDSTEP_SMI) || \ defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE) @@ -1299,7 +1300,7 @@ legacy_init_iomem_resources(struct resource *code_resource, struct resource *dat */ static void __init register_memory(void) { - unsigned long gapstart, gapsize; + unsigned long gapstart, gapsize, round; unsigned long long last; int i; @@ -1344,14 +1345,14 @@ static void __init register_memory(void) } /* - * Start allocating dynamic PCI memory a bit into the gap, - * aligned up to the nearest megabyte. - * - * Question: should we try to pad it up a bit (do something - * like " + (gapsize >> 3)" in there too?). We now have the - * technology. + * See how much we want to round up: start off with + * rounding to the next 1MB area. */ - pci_mem_start = (gapstart + 0xfffff) & ~0xfffff; + round = 0x100000; + while ((gapsize >> 4) > round) + round += round; + /* Fun with two's complement */ + pci_mem_start = (gapstart + round) & -round; printk("Allocating PCI resources starting at %08lx (gap: %08lx:%08lx)\n", pci_mem_start, gapstart, gapsize); diff --git a/arch/i386/kernel/sigframe.h b/arch/i386/kernel/sigframe.h index d21b14f5c25c..0b2221711dad 100644 --- a/arch/i386/kernel/sigframe.h +++ b/arch/i386/kernel/sigframe.h @@ -1,6 +1,6 @@ struct sigframe { - char *pretcode; + char __user *pretcode; int sig; struct sigcontext sc; struct _fpstate fpstate; @@ -10,10 +10,10 @@ struct sigframe struct rt_sigframe { - char *pretcode; + char __user *pretcode; int sig; - struct siginfo *pinfo; - void *puc; + struct siginfo __user *pinfo; + void __user *puc; struct siginfo info; struct ucontext uc; struct _fpstate fpstate; diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index eefea7c55008..2883a4d4f01f 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -329,8 +329,7 @@ EXPORT_SYMBOL(get_cmos_time); static void sync_cmos_clock(unsigned long dummy); -static struct timer_list sync_cmos_timer = - TIMER_INITIALIZER(sync_cmos_clock, 0, 0); +static DEFINE_TIMER(sync_cmos_timer, sync_cmos_clock, 0, 0); static void sync_cmos_clock(unsigned long dummy) { diff --git a/arch/i386/pci/i386.c b/arch/i386/pci/i386.c index 3cc480998a47..6d6338500c3c 100644 --- a/arch/i386/pci/i386.c +++ b/arch/i386/pci/i386.c @@ -283,9 +283,9 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, /* Write-combine setting is ignored, it is changed via the mtrr * interfaces on this platform. */ - if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, - vma->vm_end - vma->vm_start, - vma->vm_page_prot)) + if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, + vma->vm_page_prot)) return -EAGAIN; return 0; diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 00151a8320d8..ed25d66c8d50 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -339,12 +339,6 @@ config IA64_PALINFO To use this option, you have to ensure that the "/proc file system support" (CONFIG_PROC_FS) is enabled, too. -config ACPI_DEALLOCATE_IRQ - bool - depends on ACPI - depends on IOSAPIC && EXPERIMENTAL - default y - source "drivers/firmware/Kconfig" source "fs/Kconfig.binfmt" diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 1ca6e6e11b42..08112ab38468 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -111,7 +111,6 @@ CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y -CONFIG_ACPI_DEALLOCATE_IRQ=y # # Firmware Drivers diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index 3ec94a12eac0..d452e18ac494 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -109,7 +109,6 @@ CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y -CONFIG_ACPI_DEALLOCATE_IRQ=y # # Firmware Drivers diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index d4cf73d124bc..80b0e9eb7fb3 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -109,7 +109,6 @@ CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y -CONFIG_ACPI_DEALLOCATE_IRQ=y # # Firmware Drivers diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index b6ec8d32c346..5da208115ea1 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -99,7 +99,6 @@ CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y -CONFIG_ACPI_DEALLOCATE_IRQ=y # # Firmware Drivers @@ -335,7 +334,7 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -CONFIG_SCSI_QLOGIC_FC=y +# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_QLOGIC_1280_1040 is not set diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 318787c84ac0..28a4529fdd60 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -583,14 +583,12 @@ int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) EXPORT_SYMBOL(acpi_register_gsi); -#ifdef CONFIG_ACPI_DEALLOCATE_IRQ void acpi_unregister_gsi(u32 gsi) { iosapic_unregister_intr(gsi); } EXPORT_SYMBOL(acpi_unregister_gsi); -#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */ static int __init acpi_parse_fadt(unsigned long phys_addr, unsigned long size) { diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 6d70fec82d0e..ba0b6a1f429f 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -204,9 +204,6 @@ GLOBAL_ENTRY(ia64_switch_to) (p6) br.cond.dpnt .map ;; .done: -(p6) ssm psr.ic // if we had to map, reenable the psr.ic bit FIRST!!! - ;; -(p6) srlz.d ld8 sp=[r21] // load kernel stack pointer of new task mov IA64_KR(CURRENT)=in0 // update "current" application register mov r8=r13 // return pointer to previously running task @@ -234,6 +231,9 @@ GLOBAL_ENTRY(ia64_switch_to) mov IA64_KR(CURRENT_STACK)=r26 // remember last page we mapped... ;; itr.d dtr[r25]=r23 // wire in new mapping... + ssm psr.ic // reenable the psr.ic bit + ;; + srlz.d br.cond.sptk .done END(ia64_switch_to) @@ -470,6 +470,29 @@ ENTRY(load_switch_stack) br.cond.sptk.many b7 END(load_switch_stack) +GLOBAL_ENTRY(prefetch_stack) + add r14 = -IA64_SWITCH_STACK_SIZE, sp + add r15 = IA64_TASK_THREAD_KSP_OFFSET, in0 + ;; + ld8 r16 = [r15] // load next's stack pointer + lfetch.fault.excl [r14], 128 + ;; + lfetch.fault.excl [r14], 128 + lfetch.fault [r16], 128 + ;; + lfetch.fault.excl [r14], 128 + lfetch.fault [r16], 128 + ;; + lfetch.fault.excl [r14], 128 + lfetch.fault [r16], 128 + ;; + lfetch.fault.excl [r14], 128 + lfetch.fault [r16], 128 + ;; + lfetch.fault [r16], 128 + br.ret.sptk.many rp +END(prefetch_switch_stack) + GLOBAL_ENTRY(execve) mov r15=__NR_execve // put syscall number in place break __BREAK_SYSCALL diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index a13df592ebf7..574084f343fa 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -782,7 +782,6 @@ again: return vector; } -#ifdef CONFIG_ACPI_DEALLOCATE_IRQ void iosapic_unregister_intr (unsigned int gsi) { @@ -865,7 +864,6 @@ iosapic_unregister_intr (unsigned int gsi) spin_unlock(&iosapic_lock); spin_unlock_irqrestore(&idesc->lock, flags); } -#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */ /* * ACPI calls this when it finds an entry for a platform interrupt. diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index f1201ac8a116..1650353e3f77 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -38,6 +38,7 @@ #include <linux/pagemap.h> #include <linux/mount.h> #include <linux/bitops.h> +#include <linux/rcupdate.h> #include <asm/errno.h> #include <asm/intrinsics.h> @@ -496,7 +497,7 @@ typedef struct { static pfm_stats_t pfm_stats[NR_CPUS]; static pfm_session_t pfm_sessions; /* global sessions information */ -static spinlock_t pfm_alt_install_check = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(pfm_alt_install_check); static pfm_intr_handler_desc_t *pfm_alt_intr_handler; static struct proc_dir_entry *perfmon_dir; @@ -2217,15 +2218,17 @@ static void pfm_free_fd(int fd, struct file *file) { struct files_struct *files = current->files; + struct fdtable *fdt = files_fdtable(files); /* * there ie no fd_uninstall(), so we do it here */ spin_lock(&files->file_lock); - files->fd[fd] = NULL; + rcu_assign_pointer(fdt->fd[fd], NULL); spin_unlock(&files->file_lock); - if (file) put_filp(file); + if (file) + put_filp(file); put_unused_fd(fd); } diff --git a/arch/ia64/lib/memcpy_mck.S b/arch/ia64/lib/memcpy_mck.S index 6f308e62c137..46c9331e7ab5 100644 --- a/arch/ia64/lib/memcpy_mck.S +++ b/arch/ia64/lib/memcpy_mck.S @@ -625,8 +625,11 @@ EK(.ex_handler, (p17) st8 [dst1]=r39,8); \ clrrrb ;; alloc saved_pfs_stack=ar.pfs,3,3,3,0 + cmp.lt p8,p0=A,r0 sub B = dst0, saved_in0 // how many byte copied so far ;; +(p8) mov A = 0; // A shouldn't be negative, cap it + ;; sub C = A, B sub D = saved_in2, A ;; diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c index 24614869e866..3c32af910d60 100644 --- a/arch/ia64/mm/fault.c +++ b/arch/ia64/mm/fault.c @@ -230,9 +230,6 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re return; } - if (ia64_done_with_exception(regs)) - return; - /* * Since we have no vma's for region 5, we might get here even if the address is * valid, due to the VHPT walker inserting a non present translation that becomes @@ -243,6 +240,9 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re if (REGION_NUMBER(address) == 5 && mapped_kernel_page_is_present(address)) return; + if (ia64_done_with_exception(regs)) + return; + /* * Oops. The kernel tried to access some bad page. We'll have to terminate things * with extreme prejudice. diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 9977c122e9fa..9b5de589b82f 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -498,13 +498,11 @@ pcibios_enable_device (struct pci_dev *dev, int mask) return acpi_pci_irq_enable(dev); } -#ifdef CONFIG_ACPI_DEALLOCATE_IRQ void pcibios_disable_device (struct pci_dev *dev) { acpi_pci_irq_disable(dev); } -#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */ void pcibios_align_resource (void *data, struct resource *res, diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index a594aca959e6..14908ad7db8c 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -56,7 +56,7 @@ DEFINE_PER_CPU(struct pda_s, pda_percpu); -#define MAX_PHYS_MEMORY (1UL << 49) /* 1 TB */ +#define MAX_PHYS_MEMORY (1UL << IA64_MAX_PHYS_BITS) /* Max physical address supported */ lboard_t *root_lboard[MAX_COMPACT_NODES]; diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index bb1d5cf30440..ed7c21586e98 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -885,6 +885,10 @@ xpc_init(void) pid_t pid; + if (!ia64_platform_is("sn2")) { + return -ENODEV; + } + /* * xpc_remote_copy_buffer is used as a temporary buffer for bte_copy'ng * both a partition's reserved page and its XPC variables. Its size was diff --git a/arch/ia64/sn/kernel/xpnet.c b/arch/ia64/sn/kernel/xpnet.c index 78c13d676fa6..e5c6d3c0a8e9 100644 --- a/arch/ia64/sn/kernel/xpnet.c +++ b/arch/ia64/sn/kernel/xpnet.c @@ -130,7 +130,7 @@ struct net_device *xpnet_device; */ static u64 xpnet_broadcast_partitions; /* protect above */ -static spinlock_t xpnet_broadcast_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(xpnet_broadcast_lock); /* * Since the Block Transfer Engine (BTE) is being used for the transfer @@ -636,6 +636,10 @@ xpnet_init(void) int result = -ENOMEM; + if (!ia64_platform_is("sn2")) { + return -ENODEV; + } + dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME); /* diff --git a/arch/m68k/amiga/amisound.c b/arch/m68k/amiga/amisound.c index cb5d93630467..bd5d134e9f12 100644 --- a/arch/m68k/amiga/amisound.c +++ b/arch/m68k/amiga/amisound.c @@ -63,7 +63,7 @@ void __init amiga_init_sound(void) } static void nosound( unsigned long ignored ); -static struct timer_list sound_timer = TIMER_INITIALIZER(nosound, 0, 0); +static DEFINE_TIMER(sound_timer, nosound, 0, 0); void amiga_mksound( unsigned int hz, unsigned int ticks ) { diff --git a/arch/m68k/mac/macboing.c b/arch/m68k/mac/macboing.c index 44c5cd2ad6a8..8f0640847ad2 100644 --- a/arch/m68k/mac/macboing.c +++ b/arch/m68k/mac/macboing.c @@ -56,8 +56,7 @@ static void ( *mac_special_bell )( unsigned int, unsigned int, unsigned int ); /* * our timer to start/continue/stop the bell */ -static struct timer_list mac_sound_timer = - TIMER_INITIALIZER(mac_nosound, 0, 0); +static DEFINE_TIMER(mac_sound_timer, mac_nosound, 0, 0); /* * Sort of initialize the sound chip (called from mac_mksound on the first diff --git a/arch/m68knommu/platform/523x/Makefile b/arch/m68knommu/platform/523x/Makefile new file mode 100644 index 000000000000..c1578b016160 --- /dev/null +++ b/arch/m68knommu/platform/523x/Makefile @@ -0,0 +1,19 @@ +# +# Makefile for the m68knommu linux kernel. +# + +# +# If you want to play with the HW breakpoints then you will +# need to add define this, which will give you a stack backtrace +# on the console port whenever a DBG interrupt occurs. You have to +# set up you HW breakpoints to trigger a DBG interrupt: +# +# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT +# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# + +ifdef CONFIG_FULLDEBUG +AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1 +endif + +obj-y := config.o diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c index 5cb28690f89a..cf36e7d007b9 100644 --- a/arch/m68knommu/platform/5272/config.c +++ b/arch/m68knommu/platform/5272/config.c @@ -104,11 +104,11 @@ int mcf_timerirqpending(int timer) void config_BSP(char *commandp, int size) { -#if 0 - volatile unsigned long *pivrp; +#if defined (CONFIG_MOD5272) + volatile unsigned char *pivrp; /* Set base of device vectors to be 64 */ - pivrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PIVR); + pivrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_PIVR); *pivrp = 0x40; #endif diff --git a/arch/m68knommu/platform/5307/Makefile b/arch/m68knommu/platform/5307/Makefile index 84b6b70641e1..6fe5a2b8fb08 100644 --- a/arch/m68knommu/platform/5307/Makefile +++ b/arch/m68knommu/platform/5307/Makefile @@ -19,6 +19,7 @@ endif obj-$(CONFIG_COLDFIRE) += entry.o vectors.o ints.o obj-$(CONFIG_M5206) += timers.o obj-$(CONFIG_M5206e) += timers.o +obj-$(CONFIG_M523x) += pit.o obj-$(CONFIG_M5249) += timers.o obj-$(CONFIG_M527x) += pit.o obj-$(CONFIG_M5272) += timers.o diff --git a/arch/m68knommu/platform/68328/config.c b/arch/m68knommu/platform/68328/config.c index fd7c93f86481..bcfa5d7fe1e2 100644 --- a/arch/m68knommu/platform/68328/config.c +++ b/arch/m68knommu/platform/68328/config.c @@ -1,5 +1,7 @@ +/***************************************************************************/ + /* - * linux/arch/$(ARCH)/platform/$(PLATFORM)/config.c + * linux/arch/m68knommu/platform/68328/config.c * * Copyright (C) 1993 Hamish Macdonald * Copyright (C) 1999 D. Jeff Dionne @@ -11,6 +13,8 @@ * VZ Support/Fixes Evan Stawnyczy <e@lineo.ca> */ +/***************************************************************************/ + #include <asm/dbg.h> #include <stdarg.h> #include <linux/config.h> @@ -29,76 +33,16 @@ #include <asm/machdep.h> #include <asm/MC68328.h> +/***************************************************************************/ -void BSP_sched_init(irqreturn_t (*timer_routine)(int, void *, struct pt_regs *)) -{ - -#ifdef CONFIG_XCOPILOT_BUGS - /* - * The only thing I know is that CLK32 is not available on Xcopilot - * I have little idea about what frequency SYSCLK has on Xcopilot. - * The values for prescaler and compare registers were simply - * taken from the original source - */ - - /* Restart mode, Enable int, SYSCLK, Enable timer */ - TCTL2 = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_SYSCLK | TCTL_TEN; - /* Set prescaler */ - TPRER2 = 2; - /* Set compare register */ - TCMP2 = 0xd7e4; -#else - /* Restart mode, Enable int, 32KHz, Enable timer */ - TCTL2 = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN; - /* Set prescaler (Divide 32KHz by 32)*/ - TPRER2 = 31; - /* Set compare register 32Khz / 32 / 10 = 100 */ - TCMP2 = 10; -#endif - - request_irq(TMR2_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL); -} - -void BSP_tick(void) -{ - /* Reset Timer2 */ - TSTAT2 &= 0; -} +void m68328_timer_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *)); +void m68328_timer_tick(void); +unsigned long m68328_timer_gettimeoffset(void); +void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec); -unsigned long BSP_gettimeoffset (void) -{ - return 0; -} +/***************************************************************************/ -void BSP_gettod (int *yearp, int *monp, int *dayp, - int *hourp, int *minp, int *secp) -{ -} - -int BSP_hwclk(int op, struct hwclk_time *t) -{ - if (!op) { - /* read */ - } else { - /* write */ - } - return 0; -} - -int BSP_set_clock_mmss (unsigned long nowtime) -{ -#if 0 - short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60; - - tod->second1 = real_seconds / 10; - tod->second2 = real_seconds % 10; - tod->minute1 = real_minutes / 10; - tod->minute2 = real_minutes % 10; -#endif - return 0; -} - -void BSP_reset (void) +void m68328_reset (void) { local_irq_disable(); asm volatile ("moveal #0x10c00000, %a0;\n\t" @@ -108,18 +52,22 @@ void BSP_reset (void) "jmp (%a0);"); } +/***************************************************************************/ + void config_BSP(char *command, int len) { printk(KERN_INFO "\n68328 support D. Jeff Dionne <jeff@uclinux.org>\n"); printk(KERN_INFO "68328 support Kenneth Albanowski <kjahds@kjshds.com>\n"); printk(KERN_INFO "68328/Pilot support Bernhard Kuhn <kuhn@lpr.e-technik.tu-muenchen.de>\n"); - mach_sched_init = BSP_sched_init; - mach_tick = BSP_tick; - mach_gettimeoffset = BSP_gettimeoffset; - mach_gettod = BSP_gettod; + mach_sched_init = m68328_timer_init; + mach_tick = m68328_timer_tick; + mach_gettimeoffset = m68328_timer_gettimeoffset; + mach_gettod = m68328_timer_gettod; mach_hwclk = NULL; mach_set_clock_mmss = NULL; - mach_reset = BSP_reset; + mach_reset = m68328_reset; *command = '\0'; } + +/***************************************************************************/ diff --git a/arch/m68knommu/platform/68328/timers.c b/arch/m68knommu/platform/68328/timers.c new file mode 100644 index 000000000000..68c2cd6b0030 --- /dev/null +++ b/arch/m68knommu/platform/68328/timers.c @@ -0,0 +1,106 @@ +/***************************************************************************/ + +/* + * linux/arch/m68knommu/platform/68328/timers.c + * + * Copyright (C) 1993 Hamish Macdonald + * Copyright (C) 1999 D. Jeff Dionne + * Copyright (C) 2001 Georges Menie, Ken Desmet + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +/***************************************************************************/ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <asm/setup.h> +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/irq.h> +#include <asm/machdep.h> +#include <asm/MC68VZ328.h> + +/***************************************************************************/ + +#if defined(CONFIG_DRAGEN2) +/* with a 33.16 MHz clock, this will give usec resolution to the time functions */ +#define CLOCK_SOURCE TCTL_CLKSOURCE_SYSCLK +#define CLOCK_PRE 7 +#define TICKS_PER_JIFFY 41450 + +#elif defined(CONFIG_XCOPILOT_BUGS) +/* + * The only thing I know is that CLK32 is not available on Xcopilot + * I have little idea about what frequency SYSCLK has on Xcopilot. + * The values for prescaler and compare registers were simply + * taken from the original source + */ +#define CLOCK_SOURCE TCTL_CLKSOURCE_SYSCLK +#define CLOCK_PRE 2 +#define TICKS_PER_JIFFY 0xd7e4 + +#else +/* default to using the 32Khz clock */ +#define CLOCK_SOURCE TCTL_CLKSOURCE_32KHZ +#define CLOCK_PRE 31 +#define TICKS_PER_JIFFY 10 +#endif + +/***************************************************************************/ + +void m68328_timer_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *)) +{ + /* disable timer 1 */ + TCTL = 0; + + /* set ISR */ + if (request_irq(TMR_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL)) + panic("Unable to attach timer interrupt\n"); + + /* Restart mode, Enable int, Set clock source */ + TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE; + TPRER = CLOCK_PRE; + TCMP = TICKS_PER_JIFFY; + + /* Enable timer 1 */ + TCTL |= TCTL_TEN; +} + +/***************************************************************************/ + +void m68328_timer_tick(void) +{ + /* Reset Timer1 */ + TSTAT &= 0; +} +/***************************************************************************/ + +unsigned long m68328_timer_gettimeoffset(void) +{ + unsigned long ticks = TCN, offset = 0; + + /* check for pending interrupt */ + if (ticks < (TICKS_PER_JIFFY >> 1) && (ISR & (1 << TMR_IRQ_NUM))) + offset = 1000000 / HZ; + ticks = (ticks * 1000000 / HZ) / TICKS_PER_JIFFY; + return ticks + offset; +} + +/***************************************************************************/ + +void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec) +{ + long now = RTCTIME; + + *year = *mon = *day = 1; + *hour = (now >> 24) % 24; + *min = (now >> 16) % 60; + *sec = now % 60; +} + +/***************************************************************************/ diff --git a/arch/m68knommu/platform/68EZ328/config.c b/arch/m68knommu/platform/68EZ328/config.c index c21971971ff5..d8d56e5de310 100644 --- a/arch/m68knommu/platform/68EZ328/config.c +++ b/arch/m68knommu/platform/68EZ328/config.c @@ -1,5 +1,7 @@ +/***************************************************************************/ + /* - * linux/arch/$(ARCH)/platform/$(PLATFORM)/config.c + * linux/arch/m68knommu/platform/68EZ328/config.c * * Copyright (C) 1993 Hamish Macdonald * Copyright (C) 1999 D. Jeff Dionne @@ -9,6 +11,8 @@ * for more details. */ +/***************************************************************************/ + #include <stdarg.h> #include <linux/config.h> #include <linux/types.h> @@ -20,68 +24,22 @@ #include <asm/setup.h> #include <asm/system.h> #include <asm/pgtable.h> -#include <asm/irq.h> #include <asm/machdep.h> #include <asm/MC68EZ328.h> #ifdef CONFIG_UCSIMM #include <asm/bootstd.h> #endif -#ifdef CONFIG_PILOT -#include "PalmV/romfs.h" -#endif - -void BSP_sched_init(void (*timer_routine)(int, void *, struct pt_regs *)) -{ - /* Restart mode, Enable int, 32KHz, Enable timer */ - TCTL = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN; - /* Set prescaler (Divide 32KHz by 32)*/ - TPRER = 31; - /* Set compare register 32Khz / 32 / 10 = 100 */ - TCMP = 10; - - request_irq(TMR_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL); -} - -void BSP_tick(void) -{ - /* Reset Timer1 */ - TSTAT &= 0; -} - -unsigned long BSP_gettimeoffset (void) -{ - return 0; -} -void BSP_gettod (int *yearp, int *monp, int *dayp, - int *hourp, int *minp, int *secp) -{ -} +/***************************************************************************/ -int BSP_hwclk(int op, struct hwclk_time *t) -{ - if (!op) { - /* read */ - } else { - /* write */ - } - return 0; -} +void m68328_timer_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *)); +void m68328_timer_tick(void); +unsigned long m68328_timer_gettimeoffset(void); +void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec); -int BSP_set_clock_mmss (unsigned long nowtime) -{ -#if 0 - short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60; +/***************************************************************************/ - tod->second1 = real_seconds / 10; - tod->second2 = real_seconds % 10; - tod->minute1 = real_minutes / 10; - tod->minute2 = real_minutes % 10; -#endif - return 0; -} - -void BSP_reset (void) +void m68ez328_reset(void) { local_irq_disable(); asm volatile (" @@ -93,6 +51,8 @@ void BSP_reset (void) "); } +/***************************************************************************/ + unsigned char *cs8900a_hwaddr; static int errno; @@ -119,11 +79,13 @@ void config_BSP(char *command, int len) else command[0] = 0; #endif - mach_sched_init = BSP_sched_init; - mach_tick = BSP_tick; - mach_gettimeoffset = BSP_gettimeoffset; - mach_gettod = BSP_gettod; + mach_sched_init = m68328_timer_init; + mach_tick = m68328_timer_tick; + mach_gettimeoffset = m68328_timer_gettimeoffset; + mach_gettod = m68328_timer_gettod; mach_hwclk = NULL; mach_set_clock_mmss = NULL; - mach_reset = BSP_reset; + mach_reset = m68ez328_reset; } + +/***************************************************************************/ diff --git a/arch/m68knommu/platform/68VZ328/de2/config.c b/arch/m68knommu/platform/68VZ328/config.c index d0586197f113..d926524cdf82 100644 --- a/arch/m68knommu/platform/68VZ328/de2/config.c +++ b/arch/m68knommu/platform/68VZ328/config.c @@ -1,5 +1,7 @@ +/***************************************************************************/ + /* - * linux/arch/m68knommu/platform/MC68VZ328/de2/config.c + * linux/arch/m68knommu/platform/68VZ328/config.c * * Copyright (C) 1993 Hamish Macdonald * Copyright (C) 1999 D. Jeff Dionne @@ -10,6 +12,8 @@ * for more details. */ +/***************************************************************************/ + #include <linux/config.h> #include <linux/types.h> #include <linux/kernel.h> @@ -25,66 +29,25 @@ #include <asm/irq.h> #include <asm/machdep.h> #include <asm/MC68VZ328.h> +#include <asm/bootstd.h> #ifdef CONFIG_INIT_LCD -#include "screen.h" +#include "bootlogo.h" #endif -/* with a 33.16 MHz clock, this will give usec resolution to the time functions */ -#define CLOCK_SOURCE TCTL_CLKSOURCE_SYSCLK -#define CLOCK_PRE 7 -#define TICKS_PER_JIFFY 41450 - -static void -dragen2_sched_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *)) -{ - /* disable timer 1 */ - TCTL = 0; - - /* set ISR */ - if (request_irq(TMR_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL)) - panic("Unable to attach timer interrupt\n"); - - /* Restart mode, Enable int, Set clock source */ - TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE; - TPRER = CLOCK_PRE; - TCMP = TICKS_PER_JIFFY; - - /* Enable timer 1 */ - TCTL |= TCTL_TEN; -} - -static void dragen2_tick(void) -{ - /* Reset Timer1 */ - TSTAT &= 0; -} - -static unsigned long dragen2_gettimeoffset(void) -{ - unsigned long ticks = TCN, offset = 0; - - /* check for pending interrupt */ - if (ticks < (TICKS_PER_JIFFY >> 1) && (ISR & (1 << TMR_IRQ_NUM))) - offset = 1000000 / HZ; - - ticks = (ticks * 1000000 / HZ) / TICKS_PER_JIFFY; +/***************************************************************************/ - return ticks + offset; -} +void m68328_timer_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *)); +void m68328_timer_tick(void); +unsigned long m68328_timer_gettimeoffset(void); +void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec); -static void dragen2_gettod(int *year, int *mon, int *day, int *hour, - int *min, int *sec) -{ - long now = RTCTIME; +/***************************************************************************/ +/* Init Drangon Engine hardware */ +/***************************************************************************/ +#if defined(CONFIG_DRAGEN2) - *year = *mon = *day = 1; - *hour = (now >> 24) % 24; - *min = (now >> 16) % 60; - *sec = now % 60; -} - -static void dragen2_reset(void) +static void m68vz328_reset(void) { local_irq_disable(); @@ -103,7 +66,7 @@ static void dragen2_reset(void) ); } -static void init_hardware(void) +static void init_hardware(char *command, int size) { #ifdef CONFIG_DIRECT_IO_ACCESS SCR = 0x10; /* allow user access to internal registers */ @@ -170,6 +133,60 @@ static void init_hardware(void) #endif } +/***************************************************************************/ +/* Init RT-Control uCdimm hardware */ +/***************************************************************************/ +#elif defined(CONFIG_UCDIMM) + +static void m68vz328_reset(void) +{ + local_irq_disable(); + asm volatile (" + moveal #0x10c00000, %a0; + moveb #0, 0xFFFFF300; + moveal 0(%a0), %sp; + moveal 4(%a0), %a0; + jmp (%a0); + "); +} + +unsigned char *cs8900a_hwaddr; +static int errno; + +_bsc0(char *, getserialnum) +_bsc1(unsigned char *, gethwaddr, int, a) +_bsc1(char *, getbenv, char *, a) + +static void init_hardware(char *command, int size) +{ + char *p; + + printk(KERN_INFO "uCdimm serial string [%s]\n", getserialnum()); + p = cs8900a_hwaddr = gethwaddr(0); + printk(KERN_INFO "uCdimm hwaddr %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", + p[0], p[1], p[2], p[3], p[4], p[5]); + p = getbenv("APPEND"); + if (p) + strcpy(p, command); + else + command[0] = 0; +} + +/***************************************************************************/ +#else + +static void m68vz328_reset(void) +{ +} + +static void init_hardware(char *command, int size) +{ +} + +/***************************************************************************/ +#endif +/***************************************************************************/ + void config_BSP(char *command, int size) { printk(KERN_INFO "68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n"); @@ -181,11 +198,13 @@ void config_BSP(char *command, int size) memset(command, 0, size); #endif - init_hardware(); + init_hardware(command, size); - mach_sched_init = (void *)dragen2_sched_init; - mach_tick = dragen2_tick; - mach_gettimeoffset = dragen2_gettimeoffset; - mach_reset = dragen2_reset; - mach_gettod = dragen2_gettod; + mach_sched_init = (void *) m68328_timer_init; + mach_tick = m68328_timer_tick; + mach_gettimeoffset = m68328_timer_gettimeoffset; + mach_gettod = m68328_timer_gettod; + mach_reset = m68vz328_reset; } + +/***************************************************************************/ diff --git a/arch/m68knommu/platform/68VZ328/ucdimm/config.c b/arch/m68knommu/platform/68VZ328/ucdimm/config.c deleted file mode 100644 index 2deadaffd81e..000000000000 --- a/arch/m68knommu/platform/68VZ328/ucdimm/config.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * linux/arch/m68knommu/platform/68VZ328/ucdimm/config.c - * - * Copyright (C) 1993 Hamish Macdonald - * Copyright (C) 1999 D. Jeff Dionne - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#include <stdarg.h> -#include <linux/config.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/tty.h> -#include <linux/console.h> - -#include <asm/setup.h> -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/irq.h> -#include <asm/machdep.h> -#include <asm/MC68VZ328.h> -#include <asm/bootstd.h> - -void BSP_sched_init(void (*timer_routine)(int, void *, struct pt_regs *)) -{ - /* Restart mode, Enable int, 32KHz, Enable timer */ - TCTL = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN; - /* Set prescaler (Divide 32KHz by 32)*/ - TPRER = 31; - /* Set compare register 32Khz / 32 / 10 = 100 */ - TCMP = 10; - - request_irq(TMR_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL); -} - -void BSP_tick(void) -{ - /* Reset Timer1 */ - TSTAT &= 0; -} - -unsigned long BSP_gettimeoffset (void) -{ - return 0; -} - -void BSP_gettod (int *yearp, int *monp, int *dayp, - int *hourp, int *minp, int *secp) -{ -} - -int BSP_hwclk(int op, struct hwclk_time *t) -{ - if (!op) { - /* read */ - } else { - /* write */ - } - return 0; -} - -int BSP_set_clock_mmss (unsigned long nowtime) -{ -#if 0 - short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60; - - tod->second1 = real_seconds / 10; - tod->second2 = real_seconds % 10; - tod->minute1 = real_minutes / 10; - tod->minute2 = real_minutes % 10; -#endif - return 0; -} - -void BSP_reset (void) -{ - local_irq_disable(); - asm volatile (" - moveal #0x10c00000, %a0; - moveb #0, 0xFFFFF300; - moveal 0(%a0), %sp; - moveal 4(%a0), %a0; - jmp (%a0); - "); -} - -unsigned char *cs8900a_hwaddr; -static int errno; - -_bsc0(char *, getserialnum) -_bsc1(unsigned char *, gethwaddr, int, a) -_bsc1(char *, getbenv, char *, a) - -void config_BSP(char *command, int len) -{ - unsigned char *p; - - printk(KERN_INFO "\n68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n"); - - printk(KERN_INFO "uCdimm serial string [%s]\n",getserialnum()); - p = cs8900a_hwaddr = gethwaddr(0); - printk(KERN_INFO "uCdimm hwaddr %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", - p[0], p[1], p[2], p[3], p[4], p[5]); - p = getbenv("APPEND"); - if (p) strcpy(p,command); - else command[0] = 0; - - mach_sched_init = BSP_sched_init; - mach_tick = BSP_tick; - mach_gettimeoffset = BSP_gettimeoffset; - mach_gettod = BSP_gettod; - mach_reset = BSP_reset; -} diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 8d76eb1ff291..0eb71ac303af 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -154,6 +154,13 @@ config TANBAC_TB0226 The TANBAC Mbase(TB0226) is a MIPS-based platform manufactured by TANBAC. Please refer to <http://www.tanbac.co.jp/> about Mbase. +config TANBAC_TB0287 + bool "Support for TANBAC Mini-ITX DIMM base(TB0287)" + depends on TANBAC_TB022X + help + The TANBAC Mini-ITX DIMM base(TB0287) is a MIPS-based platform manufactured by TANBAC. + Please refer to <http://www.tanbac.co.jp/> about Mini-ITX DIMM base. + config VICTOR_MPC30X bool "Support for Victor MP-C303/304" depends on MACH_VR41XX diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig new file mode 100644 index 000000000000..17b9f2f65ba0 --- /dev/null +++ b/arch/mips/configs/tb0287_defconfig @@ -0,0 +1,1041 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.13-mm1 +# Thu Sep 1 22:58:34 2005 +# +CONFIG_MIPS=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set + +# +# Machine selection +# +# CONFIG_MACH_JAZZ is not set +CONFIG_MACH_VR41XX=y +# CONFIG_NEC_CMBVR4133 is not set +# CONFIG_CASIO_E55 is not set +# CONFIG_IBM_WORKPAD is not set +CONFIG_TANBAC_TB022X=y +# CONFIG_TANBAC_TB0226 is not set +CONFIG_TANBAC_TB0287=y +# CONFIG_VICTOR_MPC30X is not set +# CONFIG_ZAO_CAPCELLA is not set +CONFIG_PCI_VR41XX=y +# CONFIG_VRC4173 is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MIPS_EV64120 is not set +# CONFIG_MIPS_EV96100 is not set +# CONFIG_MIPS_IVR is not set +# CONFIG_LASAT is not set +# CONFIG_MIPS_ITE8172 is not set +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_G is not set +# CONFIG_MOMENCO_OCELOT_C is not set +# CONFIG_MOMENCO_OCELOT_3 is not set +# CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_DDB5074 is not set +# CONFIG_DDB5476 is not set +# CONFIG_DDB5477 is not set +# CONFIG_QEMU is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SOC_AU1X00 is not set +# CONFIG_SIBYTE_SB1xxx_SOC is not set +# CONFIG_SNI_RM200_PCI is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_HAVE_DEC_LOCK=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_MIPS32 is not set +# CONFIG_CPU_MIPS64 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +CONFIG_CPU_VR41XX=y +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_CPU_ADVANCED is not set +CONFIG_CPU_HAS_SYNC=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_PREEMPT is not set + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +# CONFIG_PCI_LEGACY_PROC is not set +CONFIG_MMU=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_NET_IPGRE_BROADCAST is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +CONFIG_TCP_CONG_ADVANCED=y + +# +# TCP congestion control +# +CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_PCI_AUTO is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +CONFIG_BLK_DEV_SIIMAGE=y +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set + +# +# IEEE 1394 (FireWire) support +# +CONFIG_IEEE1394=m + +# +# Subsystem Options +# +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +# CONFIG_IEEE1394_OUI_DB is not set +CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y +CONFIG_IEEE1394_CONFIG_ROM_IP1394=y +# CONFIG_IEEE1394_EXPORT_FULL_API is not set + +# +# Device Drivers +# + +# +# Texas Instruments PCILynx requires I2C +# +CONFIG_IEEE1394_OHCI1394=m + +# +# Protocol Drivers +# +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_SBP2=m +# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_IEEE1394_RAWIO=m +CONFIG_IEEE1394_CMP=m +CONFIG_IEEE1394_AMDTP=m + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_R8169_NAPI is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_KGDBOE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_VR41XX=y +CONFIG_SERIAL_VR41XX_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_TANBAC_TB0219 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +CONFIG_GPIO_VR41XX=y +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Speakup console speech +# +# CONFIG_SPEAKUP is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_GOTEMP is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_REISER4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set + +# +# XFS support +# +CONFIG_XFS_FS=y +# CONFIG_XFS_RT is not set +CONFIG_XFS_QUOTA=y +# CONFIG_XFS_SECURITY is not set +CONFIG_XFS_POSIX_ACL=y +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=m +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_QUOTACTL=y +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ASFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ISA_DMA_API=y diff --git a/arch/mips/kernel/genrtc.c b/arch/mips/kernel/genrtc.c index 288bf51ad4ec..71416e7bbbaa 100644 --- a/arch/mips/kernel/genrtc.c +++ b/arch/mips/kernel/genrtc.c @@ -14,7 +14,7 @@ #include <asm/rtc.h> #include <asm/time.h> -static spinlock_t mips_rtc_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(mips_rtc_lock); unsigned int get_rtc_time(struct rtc_time *time) { diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index 7eec7568bfea..447759201d1d 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -31,7 +31,7 @@ void disable_8259A_irq(unsigned int irq); * moves to arch independent land */ -spinlock_t i8259A_lock = SPIN_LOCK_UNLOCKED; +spinlock_t DEFINE_SPINLOCK(i8259A_lock); static void end_8259A_irq (unsigned int irq) { diff --git a/arch/mips/kernel/irixioctl.c b/arch/mips/kernel/irixioctl.c index 4cd3d38a22c2..3cdc22346f4c 100644 --- a/arch/mips/kernel/irixioctl.c +++ b/arch/mips/kernel/irixioctl.c @@ -14,6 +14,7 @@ #include <linux/syscalls.h> #include <linux/tty.h> #include <linux/file.h> +#include <linux/rcupdate.h> #include <asm/uaccess.h> #include <asm/ioctl.h> @@ -33,7 +34,7 @@ static struct tty_struct *get_tty(int fd) struct file *filp; struct tty_struct *ttyp = NULL; - spin_lock(¤t->files->file_lock); + rcu_read_lock(); filp = fcheck(fd); if(filp && filp->private_data) { ttyp = (struct tty_struct *) filp->private_data; @@ -41,7 +42,7 @@ static struct tty_struct *get_tty(int fd) if(ttyp->magic != TTY_MAGIC) ttyp =NULL; } - spin_unlock(¤t->files->file_lock); + rcu_read_unlock(); return ttyp; } diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index c53e4cb359ba..83d81c9cdc2b 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o obj-$(CONFIG_SNI_RM200_PCI) += fixup-sni.o ops-sni.o obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o +obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o obj-$(CONFIG_TOSHIBA_JMR3927) += fixup-jmr3927.o pci-jmr3927.o obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o ops-tx4927.o obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o diff --git a/arch/mips/pci/fixup-tb0287.c b/arch/mips/pci/fixup-tb0287.c new file mode 100644 index 000000000000..8436d7f1fdb2 --- /dev/null +++ b/arch/mips/pci/fixup-tb0287.c @@ -0,0 +1,65 @@ +/* + * fixup-tb0287.c, The TANBAC TB0287 specific PCI fixups. + * + * Copyright (C) 2005 Yoichi Yuasa <yuasa@hh.iij4u.or.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/init.h> +#include <linux/pci.h> + +#include <asm/vr41xx/tb0287.h> + +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + unsigned char bus; + int irq = -1; + + bus = dev->bus->number; + if (bus == 0) { + switch (slot) { + case 16: + irq = TB0287_SM501_IRQ; + break; + case 17: + irq = TB0287_SIL680A_IRQ; + break; + default: + break; + } + } else if (bus == 1) { + switch (PCI_SLOT(dev->devfn)) { + case 0: + irq = TB0287_PCI_SLOT_IRQ; + break; + case 2: + case 3: + irq = TB0287_RTL8110_IRQ; + break; + default: + break; + } + } else if (bus > 1) { + irq = TB0287_PCI_SLOT_IRQ; + } + + return irq; +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c index 89fe0ceeaa40..2ca9ec7ec3a7 100644 --- a/arch/ppc/8xx_io/cs4218_tdm.c +++ b/arch/ppc/8xx_io/cs4218_tdm.c @@ -1380,7 +1380,7 @@ static void cs_nosound(unsigned long xx) spin_unlock_irqrestore(&cs4218_lock, flags); } -static struct timer_list beep_timer = TIMER_INITIALIZER(cs_nosound, 0, 0); +static DEFINE_TIMER(beep_timer, cs_nosound, 0, 0); }; static void cs_mksound(unsigned int hz, unsigned int ticks) diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 6ab7e5ea5fcf..e3f1ce33e642 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -499,11 +499,6 @@ config WINCEPT MPC821 PowerPC, introduced in 1998 and designed to be used in thin-client machines. Say Y to support it directly. - Be aware that PCI buses can only function when SYS board is plugged - into the PIB (Platform IO Board) board from Freescale which provide - 3 PCI slots. The PIBs PCI initialization is the bootloader's - responsiblilty. - endchoice choice @@ -680,6 +675,11 @@ config MPC834x_SYS help This option enables support for the MPC 834x SYS evaluation board. + Be aware that PCI buses can only function when SYS board is plugged + into the PIB (Platform IO Board) board from Freescale which provide + 3 PCI slots. The PIBs PCI initialization is the bootloader's + responsiblilty. + config EV64360 bool "Marvell-EV64360BP" help diff --git a/arch/ppc/boot/common/ns16550.c b/arch/ppc/boot/common/ns16550.c index 9017c547a6f6..26818bbb6cff 100644 --- a/arch/ppc/boot/common/ns16550.c +++ b/arch/ppc/boot/common/ns16550.c @@ -23,7 +23,7 @@ static int shift; unsigned long serial_init(int chan, void *ignored) { - unsigned long com_port; + unsigned long com_port, base_baud; unsigned char lcr, dlm; /* We need to find out which type io we're expecting. If it's @@ -43,6 +43,8 @@ unsigned long serial_init(int chan, void *ignored) /* How far apart the registers are. */ shift = rs_table[chan].iomem_reg_shift; + /* Base baud.. */ + base_baud = rs_table[chan].baud_base; /* save the LCR */ lcr = inb(com_port + (UART_LCR << shift)); @@ -62,9 +64,9 @@ unsigned long serial_init(int chan, void *ignored) else { /* Input clock. */ outb(com_port + (UART_DLL << shift), - (BASE_BAUD / SERIAL_BAUD) & 0xFF); + (base_baud / SERIAL_BAUD) & 0xFF); outb(com_port + (UART_DLM << shift), - (BASE_BAUD / SERIAL_BAUD) >> 8); + (base_baud / SERIAL_BAUD) >> 8); /* 8 data, 1 stop, no parity */ outb(com_port + (UART_LCR << shift), 0x03); /* RTS/DTR */ diff --git a/arch/ppc/boot/common/util.S b/arch/ppc/boot/common/util.S index 47e641455bc5..c96c9f80521e 100644 --- a/arch/ppc/boot/common/util.S +++ b/arch/ppc/boot/common/util.S @@ -252,7 +252,7 @@ _GLOBAL(flush_instruction_cache) 1: dcbf r0,r3 # Flush the data cache icbi r0,r3 # Invalidate the instruction cache addi r3,r3,0x10 # Increment by one cache line - cmplwi cr0,r3,r4 # Are we at the end yet? + cmplw cr0,r3,r4 # Are we at the end yet? blt 1b # No, keep flushing and invalidating #else /* Enable, invalidate and then disable the L1 icache/dcache. */ diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index b1457a8a9c0f..1fb92f16acd6 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -15,8 +15,9 @@ extra-y += vmlinux.lds obj-y := entry.o traps.o irq.o idle.o time.o misc.o \ process.o signal.o ptrace.o align.o \ semaphore.o syscalls.o setup.o \ - cputable.o ppc_htab.o perfmon.o + cputable.o ppc_htab.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o +obj-$(CONFIG_E500) += perfmon.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_POWER4) += cpu_setup_power4.o obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index 7b3586a3bf30..854e45beb387 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -80,7 +80,6 @@ fixup_broken_pcnet32(struct pci_dev* dev) if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { dev->vendor = PCI_VENDOR_ID_AMD; pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD); - pci_name_device(dev); } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32); diff --git a/arch/ppc/kernel/syscalls.c b/arch/ppc/kernel/syscalls.c index 124313ce3c09..127f040de9de 100644 --- a/arch/ppc/kernel/syscalls.c +++ b/arch/ppc/kernel/syscalls.c @@ -41,10 +41,6 @@ #include <asm/ipc.h> #include <asm/semaphore.h> -void -check_bugs(void) -{ -} /* * sys_ipc() is the de-multiplexer for the SysV IPC calls.. diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index d87423d1003a..8356d544fa60 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -849,10 +849,12 @@ void AltivecAssistException(struct pt_regs *regs) } #endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_E500 void PerformanceMonitorException(struct pt_regs *regs) { perf_irq(regs); } +#endif #ifdef CONFIG_FSL_BOOKE void CacheLockingException(struct pt_regs *regs, unsigned long address, diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c index 0fd3442f5131..d6b2b1965dcb 100644 --- a/arch/ppc/platforms/4xx/ebony.c +++ b/arch/ppc/platforms/4xx/ebony.c @@ -91,15 +91,10 @@ ebony_calibrate_decr(void) * on Rev. C silicon then errata forces us to * use the internal clock. */ - switch (PVR_REV(mfspr(SPRN_PVR))) { - case PVR_REV(PVR_440GP_RB): - freq = EBONY_440GP_RB_SYSCLK; - break; - case PVR_REV(PVR_440GP_RC1): - default: - freq = EBONY_440GP_RC_SYSCLK; - break; - } + if (strcmp(cur_cpu_spec[0]->cpu_name, "440GP Rev. B") == 0) + freq = EBONY_440GP_RB_SYSCLK; + else + freq = EBONY_440GP_RC_SYSCLK; ibm44x_calibrate_decr(freq); } diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c index b659d7b3d747..ff3796860123 100644 --- a/arch/ppc/platforms/hdpu.c +++ b/arch/ppc/platforms/hdpu.c @@ -58,7 +58,7 @@ static void parse_bootinfo(unsigned long r3, static void hdpu_set_l1pe(void); static void hdpu_cpustate_set(unsigned char new_state); #ifdef CONFIG_SMP -static spinlock_t timebase_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(timebase_lock); static unsigned int timebase_upper = 0, timebase_lower = 0; extern int smp_tb_synchronized; diff --git a/arch/ppc/syslib/ibm440gx_common.c b/arch/ppc/syslib/ibm440gx_common.c index d4776af6a3ca..0bb919859b8b 100644 --- a/arch/ppc/syslib/ibm440gx_common.c +++ b/arch/ppc/syslib/ibm440gx_common.c @@ -236,9 +236,10 @@ void __init ibm440gx_l2c_setup(struct ibm44x_clocks* p) /* Disable L2C on rev.A, rev.B and 800MHz version of rev.C, enable it on all other revisions */ - u32 pvr = mfspr(SPRN_PVR); - if (pvr == PVR_440GX_RA || pvr == PVR_440GX_RB || - (pvr == PVR_440GX_RC && p->cpu > 667000000)) + if (strcmp(cur_cpu_spec[0]->cpu_name, "440GX Rev. A") == 0 || + strcmp(cur_cpu_spec[0]->cpu_name, "440GX Rev. B") == 0 + || (strcmp(cur_cpu_spec[0]->cpu_name, "440GX Rev. C") + == 0 && p->cpu > 667000000)) ibm440gx_l2c_disable(); else ibm440gx_l2c_enable(); diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c index 87065e2e4c5f..3e039706bdbc 100644 --- a/arch/ppc/syslib/mpc10x_common.c +++ b/arch/ppc/syslib/mpc10x_common.c @@ -140,12 +140,12 @@ struct platform_device ppc_sys_platform_devices[] = { }, [MPC10X_UART0] = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev.platform_data = serial_plat_uart0, }, [MPC10X_UART1] = { .name = "serial8250", - .id = 1, + .id = PLAT8250_DEV_PLATFORM1, .dev.platform_data = serial_plat_uart1, }, diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c index 5aaf0e58e1f9..95b3b8a7f0ba 100644 --- a/arch/ppc/syslib/mpc83xx_devices.c +++ b/arch/ppc/syslib/mpc83xx_devices.c @@ -165,7 +165,7 @@ struct platform_device ppc_sys_platform_devices[] = { }, [MPC83xx_DUART] = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev.platform_data = serial_platform_data, }, [MPC83xx_SEC2] = { diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c index 8af322dd476a..bbc5ac0de878 100644 --- a/arch/ppc/syslib/mpc85xx_devices.c +++ b/arch/ppc/syslib/mpc85xx_devices.c @@ -282,7 +282,7 @@ struct platform_device ppc_sys_platform_devices[] = { }, [MPC85xx_DUART] = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev.platform_data = serial_platform_data, }, [MPC85xx_PERFMON] = { diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c index 6262b11f366f..839f8872826f 100644 --- a/arch/ppc/syslib/mv64x60.c +++ b/arch/ppc/syslib/mv64x60.c @@ -31,7 +31,7 @@ u8 mv64x60_pci_exclude_bridge = 1; -spinlock_t mv64x60_lock = SPIN_LOCK_UNLOCKED; +DEFINE_SPINLOCK(mv64x60_lock); static phys_addr_t mv64x60_bridge_pbase; static void *mv64x60_bridge_vbase; diff --git a/arch/ppc/syslib/qspan_pci.c b/arch/ppc/syslib/qspan_pci.c index 57f4ed5e5ae1..0970b5d30391 100644 --- a/arch/ppc/syslib/qspan_pci.c +++ b/arch/ppc/syslib/qspan_pci.c @@ -94,7 +94,7 @@ #define mk_config_type1(bus, dev, offset) \ mk_config_addr(bus, dev, offset) | 1; -static spinlock_t pcibios_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(pcibios_lock); int qspan_pcibios_read_config_byte(unsigned char bus, unsigned char dev_fn, unsigned char offset, unsigned char *val) diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile index d795775a5cd7..0a23aeacba88 100644 --- a/arch/ppc64/Makefile +++ b/arch/ppc64/Makefile @@ -89,11 +89,12 @@ drivers-$(CONFIG_OPROFILE) += arch/ppc64/oprofile/ boot := arch/ppc64/boot -boottarget-$(CONFIG_PPC_PSERIES) := zImage zImage.initrd -boottarget-$(CONFIG_PPC_MAPLE) := zImage zImage.initrd -boottarget-$(CONFIG_PPC_ISERIES) := vmlinux.sminitrd vmlinux.initrd vmlinux.sm -boottarget-$(CONFIG_PPC_BPA) := zImage zImage.initrd -$(boottarget-y): vmlinux +boottargets-$(CONFIG_PPC_PSERIES) += zImage zImage.initrd +boottargets-$(CONFIG_PPC_PMAC) += zImage.vmode zImage.initrd.vmode +boottargets-$(CONFIG_PPC_MAPLE) += zImage zImage.initrd +boottargets-$(CONFIG_PPC_ISERIES) += vmlinux.sminitrd vmlinux.initrd vmlinux.sm +boottargets-$(CONFIG_PPC_BPA) += zImage zImage.initrd +$(boottargets-y): vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ bootimage-$(CONFIG_PPC_PSERIES) := $(boot)/zImage @@ -124,8 +125,10 @@ include3/asm: $(Q)ln -fsn $(srctree)/include/asm-powerpc include3/asm define archhelp - echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)' - echo ' zImage.initrd- Compressed kernel image with initrd attached,' - echo ' sourced from arch/$(ARCH)/boot/ramdisk.image.gz' - echo ' (arch/$(ARCH)/boot/zImage.initrd)' + echo ' zImage.vmode - Compressed kernel image (arch/$(ARCH)/boot/zImage.vmode)' + echo ' zImage.initrd.vmode - Compressed kernel image with initrd attached,' + echo ' sourced from arch/$(ARCH)/boot/ramdisk.image.gz' + echo ' (arch/$(ARCH)/boot/zImage.initrd.vmode)' + echo ' zImage - zImage for pSeries machines' + echo ' zImage.initrd - zImage with initrd for pSeries machines' endef diff --git a/arch/ppc64/boot/Makefile b/arch/ppc64/boot/Makefile index 2c5f5e73d00c..33fdc8710891 100644 --- a/arch/ppc64/boot/Makefile +++ b/arch/ppc64/boot/Makefile @@ -37,6 +37,9 @@ quiet_cmd_bootcc = BOOTCC $@ quiet_cmd_bootas = BOOTAS $@ cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $< +quiet_cmd_bootld = BOOTLD $@ + cmd_bootld = $(CROSS32LD) $(BOOTLFLAGS) -o $@ $(2) + $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c $(call if_changed_dep,bootcc) $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S @@ -53,7 +56,7 @@ src-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.c, $(section))) gz-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.gz, $(section))) hostprogs-y := addnote addRamDisk -targets += zImage zImage.initrd imagesize.c \ +targets += zImage.vmode zImage.initrd.vmode zImage zImage.initrd imagesize.c \ $(patsubst $(obj)/%,%, $(call obj-sec, $(required) $(initrd))) \ $(patsubst $(obj)/%,%, $(call src-sec, $(required) $(initrd))) \ $(patsubst $(obj)/%,%, $(call gz-sec, $(required) $(initrd))) \ @@ -63,7 +66,7 @@ extra-y := initrd.o quiet_cmd_ramdisk = RAMDISK $@ cmd_ramdisk = $(obj)/addRamDisk $(obj)/ramdisk.image.gz $< $@ -quiet_cmd_stripvm = STRIP $@ +quiet_cmd_stripvm = STRIP $@ cmd_stripvm = $(STRIP) -s $< -o $@ vmlinux.strip: vmlinux FORCE @@ -71,12 +74,20 @@ vmlinux.strip: vmlinux FORCE $(obj)/vmlinux.initrd: vmlinux.strip $(obj)/addRamDisk $(obj)/ramdisk.image.gz FORCE $(call if_changed,ramdisk) -addsection = $(CROSS32OBJCOPY) $(1) \ - --add-section=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $(1)))=$(patsubst %.o,%.gz, $(1)) \ - --set-section-flags=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $(1)))=$(OBJCOPYFLAGS) +quiet_cmd_addsection = ADDSEC $@ + cmd_addsection = $(CROSS32OBJCOPY) $@ \ + --add-section=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(patsubst %.o,%.gz, $@) \ + --set-section-flags=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(OBJCOPYFLAGS) + +quiet_cmd_imagesize = GENSIZE $@ + cmd_imagesize = ls -l vmlinux.strip | \ + awk '{printf "/* generated -- do not edit! */\n" "unsigned long vmlinux_filesize = %d;\n", $$5}' \ + > $(obj)/imagesize.c && \ + $(CROSS_COMPILE)nm -n vmlinux | tail -n 1 | \ + awk '{printf "unsigned long vmlinux_memsize = 0x%s;\n", substr($$1,8)}' >> $(obj)/imagesize.c -quiet_cmd_addnote = ADDNOTE $@ - cmd_addnote = $(CROSS32LD) $(BOOTLFLAGS) -o $@ $(obj-boot) && $(obj)/addnote $@ +quiet_cmd_addnote = ADDNOTE $@ + cmd_addnote = $(obj)/addnote $@ $(call gz-sec, $(required)): $(obj)/kernel-%.gz: % FORCE $(call if_changed,gzip) @@ -85,28 +96,30 @@ $(obj)/kernel-initrd.gz: $(obj)/ramdisk.image.gz cp -f $(obj)/ramdisk.image.gz $@ $(call src-sec, $(required) $(initrd)): $(obj)/kernel-%.c: $(obj)/kernel-%.gz FORCE - touch $@ + @touch $@ $(call obj-sec, $(required) $(initrd)): $(obj)/kernel-%.o: $(obj)/kernel-%.c FORCE $(call if_changed_dep,bootcc) - $(call addsection, $@) + $(call cmd,addsection) + +$(obj)/zImage.vmode: obj-boot += $(call obj-sec, $(required)) +$(obj)/zImage.vmode: $(call obj-sec, $(required)) $(obj-boot) FORCE + $(call cmd,bootld,$(obj-boot)) + +$(obj)/zImage.initrd.vmode: obj-boot += $(call obj-sec, $(required) $(initrd)) +$(obj)/zImage.initrd.vmode: $(call obj-sec, $(required) $(initrd)) $(obj-boot) FORCE + $(call cmd,bootld,$(obj-boot)) -$(obj)/zImage: obj-boot += $(call obj-sec, $(required)) -$(obj)/zImage: $(call obj-sec, $(required)) $(obj-boot) $(obj)/addnote FORCE +$(obj)/zImage: $(obj)/zImage.vmode $(obj)/addnote FORCE + @cp -f $< $@ $(call if_changed,addnote) -$(obj)/zImage.initrd: obj-boot += $(call obj-sec, $(required) $(initrd)) -$(obj)/zImage.initrd: $(call obj-sec, $(required) $(initrd)) $(obj-boot) $(obj)/addnote FORCE +$(obj)/zImage.initrd: $(obj)/zImage.initrd.vmode $(obj)/addnote FORCE + @cp -f $< $@ $(call if_changed,addnote) $(obj)/imagesize.c: vmlinux.strip - @echo Generating $@ - ls -l vmlinux.strip | \ - awk '{printf "/* generated -- do not edit! */\n" \ - "unsigned long vmlinux_filesize = %d;\n", $$5}' > $(obj)/imagesize.c - $(CROSS_COMPILE)nm -n vmlinux | tail -n 1 | \ - awk '{printf "unsigned long vmlinux_memsize = 0x%s;\n", substr($$1,8)}' \ - >> $(obj)/imagesize.c + $(call cmd,imagesize) install: $(CONFIGURE) $(BOOTIMAGE) sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" "$(BOOTIMAGE)" diff --git a/arch/ppc64/boot/main.c b/arch/ppc64/boot/main.c index 99e68cfbe688..f7ec19a2d0b0 100644 --- a/arch/ppc64/boot/main.c +++ b/arch/ppc64/boot/main.c @@ -23,7 +23,8 @@ extern void flush_cache(void *, unsigned long); /* Value picked to match that used by yaboot */ #define PROG_START 0x01400000 -#define RAM_END (256<<20) // Fixme: use OF */ +#define RAM_END (512<<20) // Fixme: use OF */ +#define ONE_MB 0x100000 static char *avail_ram; static char *begin_avail, *end_avail; @@ -32,6 +33,7 @@ static unsigned int heap_use; static unsigned int heap_max; extern char _start[]; +extern char _end[]; extern char _vmlinux_start[]; extern char _vmlinux_end[]; extern char _initrd_start[]; @@ -58,13 +60,13 @@ typedef void (*kernel_entry_t)( unsigned long, #undef DEBUG -static unsigned long claim_base = PROG_START; +static unsigned long claim_base; static unsigned long try_claim(unsigned long size) { unsigned long addr = 0; - for(; claim_base < RAM_END; claim_base += 0x100000) { + for(; claim_base < RAM_END; claim_base += ONE_MB) { #ifdef DEBUG printf(" trying: 0x%08lx\n\r", claim_base); #endif @@ -95,7 +97,26 @@ void start(unsigned long a1, unsigned long a2, void *promptr) if (getprop(chosen_handle, "stdin", &stdin, sizeof(stdin)) != 4) exit(); - printf("\n\rzImage starting: loaded at 0x%x\n\r", (unsigned)_start); + printf("\n\rzImage starting: loaded at 0x%lx\n\r", (unsigned long) _start); + + /* + * The first available claim_base must be above the end of the + * the loaded kernel wrapper file (_start to _end includes the + * initrd image if it is present) and rounded up to a nice + * 1 MB boundary for good measure. + */ + + claim_base = _ALIGN_UP((unsigned long)_end, ONE_MB); + +#if defined(PROG_START) + /* + * Maintain a "magic" minimum address. This keeps some older + * firmware platforms running. + */ + + if (claim_base < PROG_START) + claim_base = PROG_START; +#endif /* * Now we try to claim some memory for the kernel itself @@ -105,7 +126,7 @@ void start(unsigned long a1, unsigned long a2, void *promptr) * size... In practice we add 1Mb, that is enough, but we should really * consider fixing the Makefile to put a _raw_ kernel in there ! */ - vmlinux_memsize += 0x100000; + vmlinux_memsize += ONE_MB; printf("Allocating 0x%lx bytes for kernel ...\n\r", vmlinux_memsize); vmlinux.addr = try_claim(vmlinux_memsize); if (vmlinux.addr == 0) { diff --git a/arch/ppc64/kernel/bpa_iic.c b/arch/ppc64/kernel/bpa_iic.c index c8f3dc3fad70..0aaa878e19d3 100644 --- a/arch/ppc64/kernel/bpa_iic.c +++ b/arch/ppc64/kernel/bpa_iic.c @@ -205,6 +205,18 @@ static struct iic_regs __iomem *find_iic(int cpu) } #ifdef CONFIG_SMP + +/* Use the highest interrupt priorities for IPI */ +static inline int iic_ipi_to_irq(int ipi) +{ + return IIC_IPI_OFFSET + IIC_NUM_IPIS - 1 - ipi; +} + +static inline int iic_irq_to_ipi(int irq) +{ + return IIC_NUM_IPIS - 1 - (irq - IIC_IPI_OFFSET); +} + void iic_setup_cpu(void) { out_be64(&__get_cpu_var(iic).regs->prio, 0xff); @@ -212,18 +224,20 @@ void iic_setup_cpu(void) void iic_cause_IPI(int cpu, int mesg) { - out_be64(&per_cpu(iic, cpu).regs->generate, mesg); + out_be64(&per_cpu(iic, cpu).regs->generate, (IIC_NUM_IPIS - 1 - mesg) << 4); } static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs) { - - smp_message_recv(irq - IIC_IPI_OFFSET, regs); + smp_message_recv(iic_irq_to_ipi(irq), regs); return IRQ_HANDLED; } -static void iic_request_ipi(int irq, const char *name) +static void iic_request_ipi(int ipi, const char *name) { + int irq; + + irq = iic_ipi_to_irq(ipi); /* IPIs are marked SA_INTERRUPT as they must run with irqs * disabled */ get_irq_desc(irq)->handler = &iic_pic; @@ -233,10 +247,10 @@ static void iic_request_ipi(int irq, const char *name) void iic_request_IPIs(void) { - iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_CALL_FUNCTION, "IPI-call"); - iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_RESCHEDULE, "IPI-resched"); + iic_request_ipi(PPC_MSG_CALL_FUNCTION, "IPI-call"); + iic_request_ipi(PPC_MSG_RESCHEDULE, "IPI-resched"); #ifdef CONFIG_DEBUGGER - iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_DEBUGGER_BREAK, "IPI-debug"); + iic_request_ipi(PPC_MSG_DEBUGGER_BREAK, "IPI-debug"); #endif /* CONFIG_DEBUGGER */ } #endif /* CONFIG_SMP */ diff --git a/arch/ppc64/kernel/eeh.c b/arch/ppc64/kernel/eeh.c index af5272fedadf..ba93fd731222 100644 --- a/arch/ppc64/kernel/eeh.c +++ b/arch/ppc64/kernel/eeh.c @@ -202,10 +202,9 @@ static void pci_addr_cache_print(struct pci_io_addr_cache *cache) while (n) { struct pci_io_addr_range *piar; piar = rb_entry(n, struct pci_io_addr_range, rb_node); - printk(KERN_DEBUG "PCI: %s addr range %d [%lx-%lx]: %s %s\n", + printk(KERN_DEBUG "PCI: %s addr range %d [%lx-%lx]: %s\n", (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", cnt, - piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev), - pci_pretty_name(piar->pcidev)); + piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev)); cnt++; n = rb_next(n); } @@ -255,22 +254,24 @@ pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo, static void __pci_addr_cache_insert_device(struct pci_dev *dev) { struct device_node *dn; + struct pci_dn *pdn; int i; int inserted = 0; dn = pci_device_to_OF_node(dev); if (!dn) { - printk(KERN_WARNING "PCI: no pci dn found for dev=%s %s\n", - pci_name(dev), pci_pretty_name(dev)); + printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", + pci_name(dev)); return; } /* Skip any devices for which EEH is not enabled. */ - if (!(dn->eeh_mode & EEH_MODE_SUPPORTED) || - dn->eeh_mode & EEH_MODE_NOCHECK) { + pdn = dn->data; + if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || + pdn->eeh_mode & EEH_MODE_NOCHECK) { #ifdef DEBUG - printk(KERN_INFO "PCI: skip building address cache for=%s %s\n", - pci_name(dev), pci_pretty_name(dev)); + printk(KERN_INFO "PCI: skip building address cache for=%s\n", + pci_name(dev)); #endif return; } @@ -416,6 +417,7 @@ int eeh_unregister_notifier(struct notifier_block *nb) static int read_slot_reset_state(struct device_node *dn, int rets[]) { int token, outputs; + struct pci_dn *pdn = dn->data; if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) { token = ibm_read_slot_reset_state2; @@ -425,8 +427,8 @@ static int read_slot_reset_state(struct device_node *dn, int rets[]) outputs = 3; } - return rtas_call(token, 3, outputs, rets, dn->eeh_config_addr, - BUID_HI(dn->phb->buid), BUID_LO(dn->phb->buid)); + return rtas_call(token, 3, outputs, rets, pdn->eeh_config_addr, + BUID_HI(pdn->phb->buid), BUID_LO(pdn->phb->buid)); } /** @@ -447,12 +449,12 @@ static void eeh_panic(struct pci_dev *dev, int reset_state) * in light of potential corruption, we can use it here. */ if (panic_on_oops) - panic("EEH: MMIO failure (%d) on device:%s %s\n", reset_state, - pci_name(dev), pci_pretty_name(dev)); + panic("EEH: MMIO failure (%d) on device:%s\n", reset_state, + pci_name(dev)); else { __get_cpu_var(ignored_failures)++; - printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s %s\n", - reset_state, pci_name(dev), pci_pretty_name(dev)); + printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n", + reset_state, pci_name(dev)); } } @@ -482,8 +484,8 @@ static void eeh_event_handler(void *dummy) break; printk(KERN_INFO "EEH: MMIO failure (%d), notifiying device " - "%s %s\n", event->reset_state, - pci_name(event->dev), pci_pretty_name(event->dev)); + "%s\n", event->reset_state, + pci_name(event->dev)); atomic_set(&eeh_fail_count, 0); notifier_call_chain (&eeh_notifier_chain, @@ -535,6 +537,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) unsigned long flags; int rc, reset_state; struct eeh_event *event; + struct pci_dn *pdn; __get_cpu_var(total_mmio_ffs)++; @@ -543,14 +546,15 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) if (!dn) return 0; + pdn = dn->data; /* Access to IO BARs might get this far and still not want checking. */ - if (!(dn->eeh_mode & EEH_MODE_SUPPORTED) || - dn->eeh_mode & EEH_MODE_NOCHECK) { + if (!pdn->eeh_capable || !(pdn->eeh_mode & EEH_MODE_SUPPORTED) || + pdn->eeh_mode & EEH_MODE_NOCHECK) { return 0; } - if (!dn->eeh_config_addr) { + if (!pdn->eeh_config_addr) { return 0; } @@ -558,7 +562,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) * If we already have a pending isolation event for this * slot, we know it's bad already, we don't need to check... */ - if (dn->eeh_mode & EEH_MODE_ISOLATED) { + if (pdn->eeh_mode & EEH_MODE_ISOLATED) { atomic_inc(&eeh_fail_count); if (atomic_read(&eeh_fail_count) >= EEH_MAX_FAILS) { /* re-read the slot reset state */ @@ -583,7 +587,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) } /* prevent repeated reports of this failure */ - dn->eeh_mode |= EEH_MODE_ISOLATED; + pdn->eeh_mode |= EEH_MODE_ISOLATED; reset_state = rets[0]; @@ -591,9 +595,9 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) memset(slot_errbuf, 0, eeh_error_buf_size); rc = rtas_call(ibm_slot_error_detail, - 8, 1, NULL, dn->eeh_config_addr, - BUID_HI(dn->phb->buid), - BUID_LO(dn->phb->buid), NULL, 0, + 8, 1, NULL, pdn->eeh_config_addr, + BUID_HI(pdn->phb->buid), + BUID_LO(pdn->phb->buid), NULL, 0, virt_to_phys(slot_errbuf), eeh_error_buf_size, 1 /* Temporary Error */); @@ -680,8 +684,9 @@ static void *early_enable_eeh(struct device_node *dn, void *data) u32 *device_id = (u32 *)get_property(dn, "device-id", NULL); u32 *regs; int enable; + struct pci_dn *pdn = dn->data; - dn->eeh_mode = 0; + pdn->eeh_mode = 0; if (status && strcmp(status, "ok") != 0) return NULL; /* ignore devices with bad status */ @@ -692,7 +697,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data) /* There is nothing to check on PCI to ISA bridges */ if (dn->type && !strcmp(dn->type, "isa")) { - dn->eeh_mode |= EEH_MODE_NOCHECK; + pdn->eeh_mode |= EEH_MODE_NOCHECK; return NULL; } @@ -709,7 +714,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data) enable = 0; if (!enable) - dn->eeh_mode |= EEH_MODE_NOCHECK; + pdn->eeh_mode |= EEH_MODE_NOCHECK; /* Ok... see if this device supports EEH. Some do, some don't, * and the only way to find out is to check each and every one. */ @@ -722,8 +727,8 @@ static void *early_enable_eeh(struct device_node *dn, void *data) EEH_ENABLE); if (ret == 0) { eeh_subsystem_enabled = 1; - dn->eeh_mode |= EEH_MODE_SUPPORTED; - dn->eeh_config_addr = regs[0]; + pdn->eeh_mode |= EEH_MODE_SUPPORTED; + pdn->eeh_config_addr = regs[0]; #ifdef DEBUG printk(KERN_DEBUG "EEH: %s: eeh enabled\n", dn->full_name); #endif @@ -731,10 +736,11 @@ static void *early_enable_eeh(struct device_node *dn, void *data) /* This device doesn't support EEH, but it may have an * EEH parent, in which case we mark it as supported. */ - if (dn->parent && (dn->parent->eeh_mode & EEH_MODE_SUPPORTED)) { + if (dn->parent && dn->parent->data + && (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) { /* Parent supports EEH. */ - dn->eeh_mode |= EEH_MODE_SUPPORTED; - dn->eeh_config_addr = dn->parent->eeh_config_addr; + pdn->eeh_mode |= EEH_MODE_SUPPORTED; + pdn->eeh_config_addr = PCI_DN(dn->parent)->eeh_config_addr; return NULL; } } @@ -791,11 +797,13 @@ void __init eeh_init(void) for (phb = of_find_node_by_name(NULL, "pci"); phb; phb = of_find_node_by_name(phb, "pci")) { unsigned long buid; + struct pci_dn *pci; buid = get_phb_buid(phb); - if (buid == 0) + if (buid == 0 || phb->data == NULL) continue; + pci = phb->data; info.buid_lo = BUID_LO(buid); info.buid_hi = BUID_HI(buid); traverse_pci_devices(phb, early_enable_eeh, &info); @@ -824,9 +832,9 @@ void eeh_add_device_early(struct device_node *dn) struct pci_controller *phb; struct eeh_early_enable_info info; - if (!dn) + if (!dn || !dn->data) return; - phb = dn->phb; + phb = PCI_DN(dn)->phb; if (NULL == phb || 0 == phb->buid) { printk(KERN_WARNING "EEH: Expected buid but found none\n"); return; @@ -851,8 +859,7 @@ void eeh_add_device_late(struct pci_dev *dev) return; #ifdef DEBUG - printk(KERN_DEBUG "EEH: adding device %s %s\n", pci_name(dev), - pci_pretty_name(dev)); + printk(KERN_DEBUG "EEH: adding device %s\n", pci_name(dev)); #endif pci_addr_cache_insert_device (dev); @@ -873,8 +880,7 @@ void eeh_remove_device(struct pci_dev *dev) /* Unregister the device with the EEH/PCI address search system */ #ifdef DEBUG - printk(KERN_DEBUG "EEH: remove device %s %s\n", pci_name(dev), - pci_pretty_name(dev)); + printk(KERN_DEBUG "EEH: remove device %s\n", pci_name(dev)); #endif pci_addr_cache_remove_device(dev); } diff --git a/arch/ppc64/kernel/iSeries_VpdInfo.c b/arch/ppc64/kernel/iSeries_VpdInfo.c index d11c732daf81..5d921792571f 100644 --- a/arch/ppc64/kernel/iSeries_VpdInfo.c +++ b/arch/ppc64/kernel/iSeries_VpdInfo.c @@ -264,8 +264,5 @@ void __init iSeries_Device_Information(struct pci_dev *PciDev, int count) printk("%d. PCI: Bus%3d, Device%3d, Vendor %04X Frame%3d, Card %4s ", count, bus, PCI_SLOT(PciDev->devfn), PciDev->vendor, frame, card); - if (pci_class_name(PciDev->class >> 8) == 0) - printk("0x%04X\n", (int)(PciDev->class >> 8)); - else - printk("%s\n", pci_class_name(PciDev->class >> 8)); + printk("0x%04X\n", (int)(PciDev->class >> 8)); } diff --git a/arch/ppc64/kernel/iomap.c b/arch/ppc64/kernel/iomap.c index 153cc8b0f136..6160c8dbb7c5 100644 --- a/arch/ppc64/kernel/iomap.c +++ b/arch/ppc64/kernel/iomap.c @@ -22,13 +22,23 @@ unsigned int fastcall ioread16(void __iomem *addr) { return readw(addr); } +unsigned int fastcall ioread16be(void __iomem *addr) +{ + return in_be16(addr); +} unsigned int fastcall ioread32(void __iomem *addr) { return readl(addr); } +unsigned int fastcall ioread32be(void __iomem *addr) +{ + return in_be32(addr); +} EXPORT_SYMBOL(ioread8); EXPORT_SYMBOL(ioread16); +EXPORT_SYMBOL(ioread16be); EXPORT_SYMBOL(ioread32); +EXPORT_SYMBOL(ioread32be); void fastcall iowrite8(u8 val, void __iomem *addr) { @@ -38,13 +48,23 @@ void fastcall iowrite16(u16 val, void __iomem *addr) { writew(val, addr); } +void fastcall iowrite16be(u16 val, void __iomem *addr) +{ + out_be16(addr, val); +} void fastcall iowrite32(u32 val, void __iomem *addr) { writel(val, addr); } +void fastcall iowrite32be(u32 val, void __iomem *addr) +{ + out_be32(addr, val); +} EXPORT_SYMBOL(iowrite8); EXPORT_SYMBOL(iowrite16); +EXPORT_SYMBOL(iowrite16be); EXPORT_SYMBOL(iowrite32); +EXPORT_SYMBOL(iowrite32be); /* * These are the "repeat read/write" functions. Note the @@ -56,15 +76,15 @@ EXPORT_SYMBOL(iowrite32); */ void ioread8_rep(void __iomem *addr, void *dst, unsigned long count) { - _insb((u8 __force *) addr, dst, count); + _insb((u8 __iomem *) addr, dst, count); } void ioread16_rep(void __iomem *addr, void *dst, unsigned long count) { - _insw_ns((u16 __force *) addr, dst, count); + _insw_ns((u16 __iomem *) addr, dst, count); } void ioread32_rep(void __iomem *addr, void *dst, unsigned long count) { - _insl_ns((u32 __force *) addr, dst, count); + _insl_ns((u32 __iomem *) addr, dst, count); } EXPORT_SYMBOL(ioread8_rep); EXPORT_SYMBOL(ioread16_rep); @@ -72,15 +92,15 @@ EXPORT_SYMBOL(ioread32_rep); void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count) { - _outsb((u8 __force *) addr, src, count); + _outsb((u8 __iomem *) addr, src, count); } void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count) { - _outsw_ns((u16 __force *) addr, src, count); + _outsw_ns((u16 __iomem *) addr, src, count); } void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count) { - _outsl_ns((u32 __force *) addr, src, count); + _outsl_ns((u32 __iomem *) addr, src, count); } EXPORT_SYMBOL(iowrite8_rep); EXPORT_SYMBOL(iowrite16_rep); diff --git a/arch/ppc64/kernel/iommu.c b/arch/ppc64/kernel/iommu.c index 845eebd1e28d..9032b6bfe036 100644 --- a/arch/ppc64/kernel/iommu.c +++ b/arch/ppc64/kernel/iommu.c @@ -438,7 +438,8 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl) void iommu_free_table(struct device_node *dn) { - struct iommu_table *tbl = dn->iommu_table; + struct pci_dn *pdn = dn->data; + struct iommu_table *tbl = pdn->iommu_table; unsigned long bitmap_sz, i; unsigned int order; diff --git a/arch/ppc64/kernel/maple_pci.c b/arch/ppc64/kernel/maple_pci.c index 53993999b265..5a8b4d8c2dd6 100644 --- a/arch/ppc64/kernel/maple_pci.c +++ b/arch/ppc64/kernel/maple_pci.c @@ -447,9 +447,9 @@ void __init maple_pci_init(void) */ if (u3_agp) { struct device_node *np = u3_agp->arch_data; - np->busno = 0xf0; + PCI_DN(np)->busno = 0xf0; for (np = np->child; np; np = np->sibling) - np->busno = 0xf0; + PCI_DN(np)->busno = 0xf0; } /* Tell pci.c to use the common resource allocation mecanism */ diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S index 757903544e24..e7241ad80a08 100644 --- a/arch/ppc64/kernel/misc.S +++ b/arch/ppc64/kernel/misc.S @@ -1431,9 +1431,9 @@ _GLOBAL(sys_call_table) .llong .sys_ni_syscall /* 195 - 32bit only stat64 */ .llong .sys_ni_syscall /* 32bit only lstat64 */ .llong .sys_ni_syscall /* 32bit only fstat64 */ - .llong .sys_ni_syscall /* 32bit only pciconfig_read */ - .llong .sys_ni_syscall /* 32bit only pciconfig_write */ - .llong .sys_ni_syscall /* 32bit only pciconfig_iobase */ + .llong .sys_pciconfig_read + .llong .sys_pciconfig_write + .llong .sys_pciconfig_iobase /* 200 - pciconfig_iobase */ .llong .sys_ni_syscall /* reserved for MacOnLinux */ .llong .sys_getdents64 .llong .sys_pivot_root diff --git a/arch/ppc64/kernel/pSeries_iommu.c b/arch/ppc64/kernel/pSeries_iommu.c index 9d5e1e7fc389..f0fd7fbd6531 100644 --- a/arch/ppc64/kernel/pSeries_iommu.c +++ b/arch/ppc64/kernel/pSeries_iommu.c @@ -295,7 +295,7 @@ static void iommu_table_setparms_lpar(struct pci_controller *phb, struct iommu_table *tbl, unsigned int *dma_window) { - tbl->it_busno = dn->bussubno; + tbl->it_busno = PCI_DN(dn)->bussubno; /* TODO: Parse field size properties properly. */ tbl->it_size = (((unsigned long)dma_window[4] << 32) | @@ -311,6 +311,7 @@ static void iommu_table_setparms_lpar(struct pci_controller *phb, static void iommu_bus_setup_pSeries(struct pci_bus *bus) { struct device_node *dn, *pdn; + struct pci_dn *pci; struct iommu_table *tbl; DBG("iommu_bus_setup_pSeries, bus %p, bus->self %p\n", bus, bus->self); @@ -325,6 +326,7 @@ static void iommu_bus_setup_pSeries(struct pci_bus *bus) */ dn = pci_bus_to_OF_node(bus); + pci = dn->data; if (!bus->self) { /* Root bus */ @@ -341,18 +343,18 @@ static void iommu_bus_setup_pSeries(struct pci_bus *bus) * alltogether. This leaves 768MB for the window. */ DBG("PHB has io-hole, reserving 256MB\n"); - dn->phb->dma_window_size = 3 << 28; - dn->phb->dma_window_base_cur = 1 << 28; + pci->phb->dma_window_size = 3 << 28; + pci->phb->dma_window_base_cur = 1 << 28; } else { /* 1GB window by default */ - dn->phb->dma_window_size = 1 << 30; - dn->phb->dma_window_base_cur = 0; + pci->phb->dma_window_size = 1 << 30; + pci->phb->dma_window_base_cur = 0; } tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL); - iommu_table_setparms(dn->phb, dn, tbl); - dn->iommu_table = iommu_init_table(tbl); + iommu_table_setparms(pci->phb, dn, tbl); + pci->iommu_table = iommu_init_table(tbl); } else { /* Do a 128MB table at root. This is used for the IDE * controller on some SMP-mode POWER4 machines. It @@ -363,16 +365,16 @@ static void iommu_bus_setup_pSeries(struct pci_bus *bus) * Allocate at offset 128MB to avoid having to deal * with ISA holes; 128MB table for IDE is plenty. */ - dn->phb->dma_window_size = 1 << 27; - dn->phb->dma_window_base_cur = 1 << 27; + pci->phb->dma_window_size = 1 << 27; + pci->phb->dma_window_base_cur = 1 << 27; tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL); - iommu_table_setparms(dn->phb, dn, tbl); - dn->iommu_table = iommu_init_table(tbl); + iommu_table_setparms(pci->phb, dn, tbl); + pci->iommu_table = iommu_init_table(tbl); /* All child buses have 256MB tables */ - dn->phb->dma_window_size = 1 << 28; + pci->phb->dma_window_size = 1 << 28; } } else { pdn = pci_bus_to_OF_node(bus->parent); @@ -386,12 +388,12 @@ static void iommu_bus_setup_pSeries(struct pci_bus *bus) tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL); - iommu_table_setparms(dn->phb, dn, tbl); + iommu_table_setparms(pci->phb, dn, tbl); - dn->iommu_table = iommu_init_table(tbl); + pci->iommu_table = iommu_init_table(tbl); } else { /* Lower than first child or under python, use parent table */ - dn->iommu_table = pdn->iommu_table; + pci->iommu_table = PCI_DN(pdn)->iommu_table; } } } @@ -401,6 +403,7 @@ static void iommu_bus_setup_pSeriesLP(struct pci_bus *bus) { struct iommu_table *tbl; struct device_node *dn, *pdn; + struct pci_dn *ppci; unsigned int *dma_window = NULL; DBG("iommu_bus_setup_pSeriesLP, bus %p, bus->self %p\n", bus, bus->self); @@ -419,22 +422,24 @@ static void iommu_bus_setup_pSeriesLP(struct pci_bus *bus) return; } - if (!pdn->iommu_table) { + ppci = pdn->data; + if (!ppci->iommu_table) { /* Bussubno hasn't been copied yet. * Do it now because iommu_table_setparms_lpar needs it. */ - pdn->bussubno = bus->number; + + ppci->bussubno = bus->number; tbl = (struct iommu_table *)kmalloc(sizeof(struct iommu_table), GFP_KERNEL); - iommu_table_setparms_lpar(pdn->phb, pdn, tbl, dma_window); + iommu_table_setparms_lpar(ppci->phb, pdn, tbl, dma_window); - pdn->iommu_table = iommu_init_table(tbl); + ppci->iommu_table = iommu_init_table(tbl); } if (pdn != dn) - dn->iommu_table = pdn->iommu_table; + PCI_DN(dn)->iommu_table = ppci->iommu_table; } @@ -449,11 +454,11 @@ static void iommu_dev_setup_pSeries(struct pci_dev *dev) */ mydn = dn = pci_device_to_OF_node(dev); - while (dn && dn->iommu_table == NULL) + while (dn && dn->data && PCI_DN(dn)->iommu_table == NULL) dn = dn->parent; - if (dn) { - mydn->iommu_table = dn->iommu_table; + if (dn && dn->data) { + PCI_DN(mydn)->iommu_table = PCI_DN(dn)->iommu_table; } else { DBG("iommu_dev_setup_pSeries, dev %p (%s) has no iommu table\n", dev, dev->pretty_name); } @@ -463,10 +468,11 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti { int err = NOTIFY_OK; struct device_node *np = node; + struct pci_dn *pci = np->data; switch (action) { case PSERIES_RECONFIG_REMOVE: - if (np->iommu_table && + if (pci->iommu_table && get_property(np, "ibm,dma-window", NULL)) iommu_free_table(np); break; @@ -486,6 +492,7 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev) struct device_node *pdn, *dn; struct iommu_table *tbl; int *dma_window = NULL; + struct pci_dn *pci; DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, dev->pretty_name); @@ -497,8 +504,10 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev) */ dn = pci_device_to_OF_node(dev); - for (pdn = dn; pdn && !pdn->iommu_table; pdn = pdn->parent) { - dma_window = (unsigned int *)get_property(pdn, "ibm,dma-window", NULL); + for (pdn = dn; pdn && pdn->data && !PCI_DN(pdn)->iommu_table; + pdn = pdn->parent) { + dma_window = (unsigned int *) + get_property(pdn, "ibm,dma-window", NULL); if (dma_window) break; } @@ -515,20 +524,21 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev) DBG("Found DMA window, allocating table\n"); } - if (!pdn->iommu_table) { + pci = pdn->data; + if (!pci->iommu_table) { /* iommu_table_setparms_lpar needs bussubno. */ - pdn->bussubno = pdn->phb->bus->number; + pci->bussubno = pci->phb->bus->number; tbl = (struct iommu_table *)kmalloc(sizeof(struct iommu_table), GFP_KERNEL); - iommu_table_setparms_lpar(pdn->phb, pdn, tbl, dma_window); + iommu_table_setparms_lpar(pci->phb, pdn, tbl, dma_window); - pdn->iommu_table = iommu_init_table(tbl); + pci->iommu_table = iommu_init_table(tbl); } if (pdn != dn) - dn->iommu_table = pdn->iommu_table; + PCI_DN(dn)->iommu_table = pci->iommu_table; } static void iommu_bus_setup_null(struct pci_bus *b) { } diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c index d0d55c7908ef..8447dcc2c2b3 100644 --- a/arch/ppc64/kernel/pci.c +++ b/arch/ppc64/kernel/pci.c @@ -21,6 +21,7 @@ #include <linux/bootmem.h> #include <linux/mm.h> #include <linux/list.h> +#include <linux/syscalls.h> #include <asm/processor.h> #include <asm/io.h> @@ -84,7 +85,6 @@ static void fixup_broken_pcnet32(struct pci_dev* dev) if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { dev->vendor = PCI_VENDOR_ID_AMD; pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD); - pci_name_device(dev); } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32); @@ -838,9 +838,11 @@ int pcibios_scan_all_fns(struct pci_bus *bus, int devfn) * device tree. If they are then we need to scan all the * functions of this slot. */ - for (dn = busdn->child; dn; dn = dn->sibling) - if ((dn->devfn >> 3) == (devfn >> 3)) + for (dn = busdn->child; dn; dn = dn->sibling) { + struct pci_dn *pdn = dn->data; + if (pdn && (pdn->devfn >> 3) == (devfn >> 3)) return 1; + } return 0; } @@ -983,3 +985,62 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar, } #endif /* CONFIG_PPC_MULTIPLATFORM */ + + +#define IOBASE_BRIDGE_NUMBER 0 +#define IOBASE_MEMORY 1 +#define IOBASE_IO 2 +#define IOBASE_ISA_IO 3 +#define IOBASE_ISA_MEM 4 + +long sys_pciconfig_iobase(long which, unsigned long in_bus, + unsigned long in_devfn) +{ + struct pci_controller* hose; + struct list_head *ln; + struct pci_bus *bus = NULL; + struct device_node *hose_node; + + /* Argh ! Please forgive me for that hack, but that's the + * simplest way to get existing XFree to not lockup on some + * G5 machines... So when something asks for bus 0 io base + * (bus 0 is HT root), we return the AGP one instead. + */ +#ifdef CONFIG_PPC_PMAC + if (systemcfg->platform == PLATFORM_POWERMAC && + machine_is_compatible("MacRISC4")) + if (in_bus == 0) + in_bus = 0xf0; +#endif /* CONFIG_PPC_PMAC */ + + /* That syscall isn't quite compatible with PCI domains, but it's + * used on pre-domains setup. We return the first match + */ + + for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) { + bus = pci_bus_b(ln); + if (in_bus >= bus->number && in_bus < (bus->number + bus->subordinate)) + break; + bus = NULL; + } + if (bus == NULL || bus->sysdata == NULL) + return -ENODEV; + + hose_node = (struct device_node *)bus->sysdata; + hose = PCI_DN(hose_node)->phb; + + switch (which) { + case IOBASE_BRIDGE_NUMBER: + return (long)hose->first_busno; + case IOBASE_MEMORY: + return (long)hose->pci_mem_offset; + case IOBASE_IO: + return (long)hose->io_base_phys; + case IOBASE_ISA_IO: + return (long)isa_io_base; + case IOBASE_ISA_MEM: + return -EINVAL; + } + + return -EOPNOTSUPP; +} diff --git a/arch/ppc64/kernel/pci.h b/arch/ppc64/kernel/pci.h index 26be78b13af1..5eb2cc320566 100644 --- a/arch/ppc64/kernel/pci.h +++ b/arch/ppc64/kernel/pci.h @@ -34,7 +34,6 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre, void pci_devs_phb_init(void); void pci_devs_phb_init_dynamic(struct pci_controller *phb); -struct device_node *fetch_dev_dn(struct pci_dev *dev); /* PCI address cache management routines */ void pci_addr_cache_insert_device(struct pci_dev *dev); diff --git a/arch/ppc64/kernel/pci_dn.c b/arch/ppc64/kernel/pci_dn.c index ec345462afc3..a86389d07d57 100644 --- a/arch/ppc64/kernel/pci_dn.c +++ b/arch/ppc64/kernel/pci_dn.c @@ -23,6 +23,8 @@ #include <linux/pci.h> #include <linux/string.h> #include <linux/init.h> +#include <linux/slab.h> +#include <linux/bootmem.h> #include <asm/io.h> #include <asm/prom.h> @@ -40,16 +42,26 @@ static void * __devinit update_dn_pci_info(struct device_node *dn, void *data) struct pci_controller *phb = data; int *type = (int *)get_property(dn, "ibm,pci-config-space-type", NULL); u32 *regs; - - dn->phb = phb; + struct pci_dn *pdn; + + if (phb->is_dynamic) + pdn = kmalloc(sizeof(*pdn), GFP_KERNEL); + else + pdn = alloc_bootmem(sizeof(*pdn)); + if (pdn == NULL) + return NULL; + memset(pdn, 0, sizeof(*pdn)); + dn->data = pdn; + pdn->node = dn; + pdn->phb = phb; regs = (u32 *)get_property(dn, "reg", NULL); if (regs) { /* First register entry is addr (00BBSS00) */ - dn->busno = (regs[0] >> 16) & 0xff; - dn->devfn = (regs[0] >> 8) & 0xff; + pdn->busno = (regs[0] >> 16) & 0xff; + pdn->devfn = (regs[0] >> 8) & 0xff; } - dn->pci_ext_config_space = (type && *type == 1); + pdn->pci_ext_config_space = (type && *type == 1); return NULL; } @@ -112,10 +124,15 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre, void __devinit pci_devs_phb_init_dynamic(struct pci_controller *phb) { struct device_node * dn = (struct device_node *) phb->arch_data; + struct pci_dn *pdn; /* PHB nodes themselves must not match */ - dn->devfn = dn->busno = -1; - dn->phb = phb; + update_dn_pci_info(dn, phb); + pdn = dn->data; + if (pdn) { + pdn->devfn = pdn->busno = -1; + pdn->phb = phb; + } /* Update dn->phb ptrs for new phb and children devices */ traverse_pci_devices(dn, update_dn_pci_info, phb); @@ -123,14 +140,17 @@ void __devinit pci_devs_phb_init_dynamic(struct pci_controller *phb) /* * Traversal func that looks for a <busno,devfcn> value. - * If found, the device_node is returned (thus terminating the traversal). + * If found, the pci_dn is returned (thus terminating the traversal). */ static void *is_devfn_node(struct device_node *dn, void *data) { int busno = ((unsigned long)data >> 8) & 0xff; int devfn = ((unsigned long)data) & 0xff; + struct pci_dn *pci = dn->data; - return ((devfn == dn->devfn) && (busno == dn->busno)) ? dn : NULL; + if (pci && (devfn == pci->devfn) && (busno == pci->busno)) + return dn; + return NULL; } /* @@ -149,13 +169,10 @@ static void *is_devfn_node(struct device_node *dn, void *data) struct device_node *fetch_dev_dn(struct pci_dev *dev) { struct device_node *orig_dn = dev->sysdata; - struct pci_controller *phb = orig_dn->phb; /* assume same phb as orig_dn */ - struct device_node *phb_dn; struct device_node *dn; unsigned long searchval = (dev->bus->number << 8) | dev->devfn; - phb_dn = phb->arch_data; - dn = traverse_pci_devices(phb_dn, is_devfn_node, (void *)searchval); + dn = traverse_pci_devices(orig_dn, is_devfn_node, (void *)searchval); if (dn) dev->sysdata = dn; return dn; @@ -165,11 +182,13 @@ EXPORT_SYMBOL(fetch_dev_dn); static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) { struct device_node *np = node; + struct pci_dn *pci; int err = NOTIFY_OK; switch (action) { case PSERIES_RECONFIG_ADD: - update_dn_pci_info(np, np->parent->phb); + pci = np->parent->data; + update_dn_pci_info(np, pci->phb); break; default: err = NOTIFY_DONE; diff --git a/arch/ppc64/kernel/pci_iommu.c b/arch/ppc64/kernel/pci_iommu.c index ef0a62b916be..14647e09c9cd 100644 --- a/arch/ppc64/kernel/pci_iommu.c +++ b/arch/ppc64/kernel/pci_iommu.c @@ -66,7 +66,7 @@ static inline struct iommu_table *devnode_table(struct device *dev) #endif /* CONFIG_PPC_ISERIES */ #ifdef CONFIG_PPC_MULTIPLATFORM - return PCI_GET_DN(pdev)->iommu_table; + return PCI_DN(PCI_GET_DN(pdev))->iommu_table; #endif /* CONFIG_PPC_MULTIPLATFORM */ } diff --git a/arch/ppc64/kernel/pmac_feature.c b/arch/ppc64/kernel/pmac_feature.c index 98ed2bccab1a..eb4e6c3f694d 100644 --- a/arch/ppc64/kernel/pmac_feature.c +++ b/arch/ppc64/kernel/pmac_feature.c @@ -674,6 +674,7 @@ void __init pmac_check_ht_link(void) #if 0 /* Disabled for now */ u32 ufreq, freq, ucfg, cfg; struct device_node *pcix_node; + struct pci_dn *pdn; u8 px_bus, px_devfn; struct pci_controller *px_hose; @@ -687,9 +688,10 @@ void __init pmac_check_ht_link(void) printk("No PCI-X bridge found\n"); return; } - px_hose = pcix_node->phb; - px_bus = pcix_node->busno; - px_devfn = pcix_node->devfn; + pdn = pcix_node->data; + px_hose = pdn->phb; + px_bus = pdn->busno; + px_devfn = pdn->devfn; early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg); early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq); diff --git a/arch/ppc64/kernel/pmac_pci.c b/arch/ppc64/kernel/pmac_pci.c index 71fe911ad183..d37bff2d7d40 100644 --- a/arch/ppc64/kernel/pmac_pci.c +++ b/arch/ppc64/kernel/pmac_pci.c @@ -242,7 +242,7 @@ static int u3_ht_skip_device(struct pci_controller *hose, else busdn = hose->arch_data; for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->devfn == devfn) + if (dn->data && PCI_DN(dn)->devfn == devfn) break; if (dn == NULL) return -1; @@ -746,9 +746,9 @@ void __init pmac_pci_init(void) */ if (u3_agp) { struct device_node *np = u3_agp->arch_data; - np->busno = 0xf0; + PCI_DN(np)->busno = 0xf0; for (np = np->child; np; np = np->sibling) - np->busno = 0xf0; + PCI_DN(np)->busno = 0xf0; } pmac_check_ht_link(); diff --git a/arch/ppc64/kernel/pmc.c b/arch/ppc64/kernel/pmc.c index cdfec7438d01..63d9481c3ec2 100644 --- a/arch/ppc64/kernel/pmc.c +++ b/arch/ppc64/kernel/pmc.c @@ -26,7 +26,7 @@ static void dummy_perf(struct pt_regs *regs) mtspr(SPRN_MMCR0, mmcr0); } -static spinlock_t pmc_owner_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(pmc_owner_lock); static void *pmc_owner_caller; /* mostly for debugging */ perf_irq_t perf_irq = dummy_perf; diff --git a/arch/ppc64/kernel/prom.c b/arch/ppc64/kernel/prom.c index 6ad5a8467f87..7035deb6de92 100644 --- a/arch/ppc64/kernel/prom.c +++ b/arch/ppc64/kernel/prom.c @@ -1733,6 +1733,7 @@ static void of_node_release(struct kref *kref) kfree(node->intrs); kfree(node->addrs); kfree(node->full_name); + kfree(node->data); kfree(node); } diff --git a/arch/ppc64/kernel/rtas_pci.c b/arch/ppc64/kernel/rtas_pci.c index 1dccadaddd1d..4a9719b48abe 100644 --- a/arch/ppc64/kernel/rtas_pci.c +++ b/arch/ppc64/kernel/rtas_pci.c @@ -48,7 +48,7 @@ static int write_pci_config; static int ibm_read_pci_config; static int ibm_write_pci_config; -static int config_access_valid(struct device_node *dn, int where) +static int config_access_valid(struct pci_dn *dn, int where) { if (where < 256) return 1; @@ -78,15 +78,17 @@ static int rtas_read_config(struct device_node *dn, int where, int size, u32 *va int returnval = -1; unsigned long buid, addr; int ret; + struct pci_dn *pdn; - if (!dn) + if (!dn || !dn->data) return PCIBIOS_DEVICE_NOT_FOUND; - if (!config_access_valid(dn, where)) + pdn = dn->data; + if (!config_access_valid(pdn, where)) return PCIBIOS_BAD_REGISTER_NUMBER; - addr = ((where & 0xf00) << 20) | (dn->busno << 16) | - (dn->devfn << 8) | (where & 0xff); - buid = dn->phb->buid; + addr = ((where & 0xf00) << 20) | (pdn->busno << 16) | + (pdn->devfn << 8) | (where & 0xff); + buid = pdn->phb->buid; if (buid) { ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval, addr, buid >> 32, buid & 0xffffffff, size); @@ -98,8 +100,8 @@ static int rtas_read_config(struct device_node *dn, int where, int size, u32 *va if (ret) return PCIBIOS_DEVICE_NOT_FOUND; - if (returnval == EEH_IO_ERROR_VALUE(size) - && eeh_dn_check_failure (dn, NULL)) + if (returnval == EEH_IO_ERROR_VALUE(size) && + eeh_dn_check_failure (dn, NULL)) return PCIBIOS_DEVICE_NOT_FOUND; return PCIBIOS_SUCCESSFUL; @@ -118,24 +120,28 @@ static int rtas_pci_read_config(struct pci_bus *bus, /* Search only direct children of the bus */ for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->devfn == devfn && of_device_available(dn)) + if (dn->data && PCI_DN(dn)->devfn == devfn + && of_device_available(dn)) return rtas_read_config(dn, where, size, val); + return PCIBIOS_DEVICE_NOT_FOUND; } -static int rtas_write_config(struct device_node *dn, int where, int size, u32 val) +int rtas_write_config(struct device_node *dn, int where, int size, u32 val) { unsigned long buid, addr; int ret; + struct pci_dn *pdn; - if (!dn) + if (!dn || !dn->data) return PCIBIOS_DEVICE_NOT_FOUND; - if (!config_access_valid(dn, where)) + pdn = dn->data; + if (!config_access_valid(pdn, where)) return PCIBIOS_BAD_REGISTER_NUMBER; - addr = ((where & 0xf00) << 20) | (dn->busno << 16) | - (dn->devfn << 8) | (where & 0xff); - buid = dn->phb->buid; + addr = ((where & 0xf00) << 20) | (pdn->busno << 16) | + (pdn->devfn << 8) | (where & 0xff); + buid = pdn->phb->buid; if (buid) { ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, buid >> 32, buid & 0xffffffff, size, (ulong) val); } else { @@ -161,7 +167,8 @@ static int rtas_pci_write_config(struct pci_bus *bus, /* Search only direct children of the bus */ for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->devfn == devfn && of_device_available(dn)) + if (dn->data && PCI_DN(dn)->devfn == devfn + && of_device_available(dn)) return rtas_write_config(dn, where, size, val); return PCIBIOS_DEVICE_NOT_FOUND; } diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c index d0bb68af0ea4..bfa8791c9807 100644 --- a/arch/ppc64/kernel/setup.c +++ b/arch/ppc64/kernel/setup.c @@ -1283,7 +1283,7 @@ void __init generic_find_legacy_serial_ports(u64 *physport, static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_ports, }, diff --git a/arch/ppc64/kernel/sys_ppc32.c b/arch/ppc64/kernel/sys_ppc32.c index 214914a95a50..e93c13458910 100644 --- a/arch/ppc64/kernel/sys_ppc32.c +++ b/arch/ppc64/kernel/sys_ppc32.c @@ -708,62 +708,9 @@ asmlinkage int sys32_pciconfig_write(u32 bus, u32 dfn, u32 off, u32 len, u32 ubu compat_ptr(ubuf)); } -#define IOBASE_BRIDGE_NUMBER 0 -#define IOBASE_MEMORY 1 -#define IOBASE_IO 2 -#define IOBASE_ISA_IO 3 -#define IOBASE_ISA_MEM 4 - asmlinkage int sys32_pciconfig_iobase(u32 which, u32 in_bus, u32 in_devfn) { -#ifdef CONFIG_PCI - struct pci_controller* hose; - struct list_head *ln; - struct pci_bus *bus = NULL; - struct device_node *hose_node; - - /* Argh ! Please forgive me for that hack, but that's the - * simplest way to get existing XFree to not lockup on some - * G5 machines... So when something asks for bus 0 io base - * (bus 0 is HT root), we return the AGP one instead. - */ -#ifdef CONFIG_PPC_PMAC - if (systemcfg->platform == PLATFORM_POWERMAC && - machine_is_compatible("MacRISC4")) - if (in_bus == 0) - in_bus = 0xf0; -#endif /* CONFIG_PPC_PMAC */ - - /* That syscall isn't quite compatible with PCI domains, but it's - * used on pre-domains setup. We return the first match - */ - - for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) { - bus = pci_bus_b(ln); - if (in_bus >= bus->number && in_bus < (bus->number + bus->subordinate)) - break; - bus = NULL; - } - if (bus == NULL || bus->sysdata == NULL) - return -ENODEV; - - hose_node = (struct device_node *)bus->sysdata; - hose = hose_node->phb; - - switch (which) { - case IOBASE_BRIDGE_NUMBER: - return (long)hose->first_busno; - case IOBASE_MEMORY: - return (long)hose->pci_mem_offset; - case IOBASE_IO: - return (long)hose->io_base_phys; - case IOBASE_ISA_IO: - return (long)isa_io_base; - case IOBASE_ISA_MEM: - return -EINVAL; - } -#endif /* CONFIG_PCI */ - return -EOPNOTSUPP; + return sys_pciconfig_iobase(which, in_bus, in_devfn); } diff --git a/arch/ppc64/kernel/syscalls.c b/arch/ppc64/kernel/syscalls.c index a8cbb202b8cd..05f16633bd2c 100644 --- a/arch/ppc64/kernel/syscalls.c +++ b/arch/ppc64/kernel/syscalls.c @@ -46,10 +46,6 @@ extern unsigned long wall_jiffies; -void -check_bugs(void) -{ -} /* * sys_ipc() is the de-multiplexer for the SysV IPC calls.. diff --git a/arch/ppc64/kernel/u3_iommu.c b/arch/ppc64/kernel/u3_iommu.c index b6e3bca4102d..41ea09cb9ac7 100644 --- a/arch/ppc64/kernel/u3_iommu.c +++ b/arch/ppc64/kernel/u3_iommu.c @@ -276,7 +276,7 @@ static void iommu_dev_setup_u3(struct pci_dev *dev) dn = pci_device_to_OF_node(dev); if (dn) - dn->iommu_table = &iommu_table_u3; + PCI_DN(dn)->iommu_table = &iommu_table_u3; } static void iommu_bus_setup_u3(struct pci_bus *bus) @@ -291,7 +291,7 @@ static void iommu_bus_setup_u3(struct pci_bus *bus) dn = pci_bus_to_OF_node(bus); if (dn) - dn->iommu_table = &iommu_table_u3; + PCI_DN(dn)->iommu_table = &iommu_table_u3; } static void iommu_dev_setup_null(struct pci_dev *dev) { } diff --git a/arch/ppc64/kernel/udbg.c b/arch/ppc64/kernel/udbg.c index ed6766e21f5a..d49c3613c8ec 100644 --- a/arch/ppc64/kernel/udbg.c +++ b/arch/ppc64/kernel/udbg.c @@ -158,14 +158,20 @@ static struct console udbg_console = { .index = -1, }; +static int early_console_initialized; + void __init disable_early_printk(void) { + if (!early_console_initialized) + return; unregister_console(&udbg_console); + early_console_initialized = 0; } /* called by setup_system */ void register_early_udbg_console(void) { + early_console_initialized = 1; register_console(&udbg_console); } diff --git a/arch/ppc64/mm/init.c b/arch/ppc64/mm/init.c index a14ab87df491..c2157c9c3acb 100644 --- a/arch/ppc64/mm/init.c +++ b/arch/ppc64/mm/init.c @@ -554,12 +554,12 @@ void __init do_init_bootmem(void) * present. */ for (i=0; i < lmb.memory.cnt; i++) - free_bootmem(lmb_start_pfn(&lmb.memory, i), + free_bootmem(lmb.memory.region[i].base, lmb_size_bytes(&lmb.memory, i)); /* reserve the sections we're already using */ for (i=0; i < lmb.reserved.cnt; i++) - reserve_bootmem(lmb_start_pfn(&lmb.reserved, i), + reserve_bootmem(lmb.reserved.region[i].base, lmb_size_bytes(&lmb.reserved, i)); for (i=0; i < lmb.memory.cnt; i++) diff --git a/arch/s390/Makefile b/arch/s390/Makefile index 189c8f3a369c..98db30481d97 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -19,6 +19,7 @@ CFLAGS += -m31 AFLAGS += -m31 UTS_MACHINE := s390 STACK_SIZE := 8192 +CHECKFLAGS += -D__s390__ endif ifdef CONFIG_ARCH_S390X @@ -28,6 +29,7 @@ CFLAGS += -m64 AFLAGS += -m64 UTS_MACHINE := s390x STACK_SIZE := 16384 +CHECKFLAGS += -D__s390__ -D__s390x__ endif cflags-$(CONFIG_MARCH_G5) += $(call cc-option,-march=g5) diff --git a/arch/sparc/lib/atomic32.c b/arch/sparc/lib/atomic32.c index 19724c5800a7..2e64e8c3e8e5 100644 --- a/arch/sparc/lib/atomic32.c +++ b/arch/sparc/lib/atomic32.c @@ -20,7 +20,7 @@ spinlock_t __atomic_hash[ATOMIC_HASH_SIZE] = { #else /* SMP */ -static spinlock_t dummy = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(dummy); #define ATOMIC_HASH_SIZE 1 #define ATOMIC_HASH(a) (&dummy) diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index ec8bf4012c0c..2ff7c32ab0ce 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -359,134 +359,17 @@ void pcibios_fixup_bus(struct pci_bus *pbus) pbus->resource[1] = &pbm->mem_space; } -int pci_claim_resource(struct pci_dev *pdev, int resource) +struct resource *pcibios_select_root(struct pci_dev *pdev, struct resource *r) { struct pci_pbm_info *pbm = pdev->bus->sysdata; - struct resource *res = &pdev->resource[resource]; - struct resource *root; - - if (!pbm) - return -EINVAL; + struct resource *root = NULL; - if (res->flags & IORESOURCE_IO) + if (r->flags & IORESOURCE_IO) root = &pbm->io_space; - else + if (r->flags & IORESOURCE_MEM) root = &pbm->mem_space; - pbm->parent->resource_adjust(pdev, res, root); - - return request_resource(root, res); -} - -/* - * Given the PCI bus a device resides on, try to - * find an acceptable resource allocation for a - * specific device resource.. - */ -static int pci_assign_bus_resource(const struct pci_bus *bus, - struct pci_dev *dev, - struct resource *res, - unsigned long size, - unsigned long min, - int resno) -{ - unsigned int type_mask; - int i; - - type_mask = IORESOURCE_IO | IORESOURCE_MEM; - for (i = 0 ; i < 4; i++) { - struct resource *r = bus->resource[i]; - if (!r) - continue; - - /* type_mask must match */ - if ((res->flags ^ r->flags) & type_mask) - continue; - - /* Ok, try it out.. */ - if (allocate_resource(r, res, size, min, -1, size, NULL, NULL) < 0) - continue; - - /* PCI config space updated by caller. */ - return 0; - } - return -EBUSY; -} - -int pci_assign_resource(struct pci_dev *pdev, int resource) -{ - struct pcidev_cookie *pcp = pdev->sysdata; - struct pci_pbm_info *pbm = pcp->pbm; - struct resource *res = &pdev->resource[resource]; - unsigned long min, size; - int err; - - if (res->flags & IORESOURCE_IO) - min = pbm->io_space.start + 0x400UL; - else - min = pbm->mem_space.start; - - size = res->end - res->start + 1; - - err = pci_assign_bus_resource(pdev->bus, pdev, res, size, min, resource); - - if (err < 0) { - printk("PCI: Failed to allocate resource %d for %s\n", - resource, pci_name(pdev)); - } else { - /* Update PCI config space. */ - pbm->parent->base_address_update(pdev, resource); - } - - return err; -} - -/* Sort resources by alignment */ -void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head) -{ - int i; - - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - struct resource *r; - struct resource_list *list, *tmp; - unsigned long r_align; - - r = &dev->resource[i]; - r_align = r->end - r->start; - - if (!(r->flags) || r->parent) - continue; - if (!r_align) { - printk(KERN_WARNING "PCI: Ignore bogus resource %d " - "[%lx:%lx] of %s\n", - i, r->start, r->end, pci_name(dev)); - continue; - } - r_align = (i < PCI_BRIDGE_RESOURCES) ? r_align + 1 : r->start; - for (list = head; ; list = list->next) { - unsigned long align = 0; - struct resource_list *ln = list->next; - int idx; - - if (ln) { - idx = ln->res - &ln->dev->resource[0]; - align = (idx < PCI_BRIDGE_RESOURCES) ? - ln->res->end - ln->res->start + 1 : - ln->res->start; - } - if (r_align > align) { - tmp = kmalloc(sizeof(*tmp), GFP_KERNEL); - if (!tmp) - panic("pdev_sort_resources(): " - "kmalloc() failed!\n"); - tmp->next = ln; - tmp->res = r; - tmp->dev = dev; - list->next = tmp; - break; - } - } - } + return root; } void pcibios_update_irq(struct pci_dev *pdev, int irq) diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index 91ab466d6c66..6ed1ef25e0ac 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -307,7 +307,7 @@ static unsigned char psycho_pil_table[] = { /*0x32*/15, /* Power Management */ }; -static int __init psycho_ino_to_pil(struct pci_dev *pdev, unsigned int ino) +static int psycho_ino_to_pil(struct pci_dev *pdev, unsigned int ino) { int ret; @@ -344,9 +344,9 @@ static int __init psycho_ino_to_pil(struct pci_dev *pdev, unsigned int ino) return ret; } -static unsigned int __init psycho_irq_build(struct pci_pbm_info *pbm, - struct pci_dev *pdev, - unsigned int ino) +static unsigned int psycho_irq_build(struct pci_pbm_info *pbm, + struct pci_dev *pdev, + unsigned int ino) { struct ino_bucket *bucket; unsigned long imap, iclr; @@ -1024,7 +1024,7 @@ static irqreturn_t psycho_pcierr_intr(int irq, void *dev_id, struct pt_regs *reg #define PSYCHO_CE_INO 0x2f #define PSYCHO_PCIERR_A_INO 0x30 #define PSYCHO_PCIERR_B_INO 0x31 -static void __init psycho_register_error_handlers(struct pci_controller_info *p) +static void psycho_register_error_handlers(struct pci_controller_info *p) { struct pci_pbm_info *pbm = &p->pbm_A; /* arbitrary */ unsigned long base = p->pbm_A.controller_regs; @@ -1091,15 +1091,15 @@ static void __init psycho_register_error_handlers(struct pci_controller_info *p) } /* PSYCHO boot time probing and initialization. */ -static void __init psycho_resource_adjust(struct pci_dev *pdev, - struct resource *res, - struct resource *root) +static void psycho_resource_adjust(struct pci_dev *pdev, + struct resource *res, + struct resource *root) { res->start += root->start; res->end += root->start; } -static void __init psycho_base_address_update(struct pci_dev *pdev, int resource) +static void psycho_base_address_update(struct pci_dev *pdev, int resource) { struct pcidev_cookie *pcp = pdev->sysdata; struct pci_pbm_info *pbm = pcp->pbm; @@ -1144,7 +1144,7 @@ static void __init psycho_base_address_update(struct pci_dev *pdev, int resource pci_write_config_dword(pdev, where + 4, 0); } -static void __init pbm_config_busmastering(struct pci_pbm_info *pbm) +static void pbm_config_busmastering(struct pci_pbm_info *pbm) { u8 *addr; @@ -1161,8 +1161,8 @@ static void __init pbm_config_busmastering(struct pci_pbm_info *pbm) pci_config_write8(addr, 64); } -static void __init pbm_scan_bus(struct pci_controller_info *p, - struct pci_pbm_info *pbm) +static void pbm_scan_bus(struct pci_controller_info *p, + struct pci_pbm_info *pbm) { struct pcidev_cookie *cookie = kmalloc(sizeof(*cookie), GFP_KERNEL); @@ -1189,7 +1189,7 @@ static void __init pbm_scan_bus(struct pci_controller_info *p, pci_setup_busmastering(pbm, pbm->pci_bus); } -static void __init psycho_scan_bus(struct pci_controller_info *p) +static void psycho_scan_bus(struct pci_controller_info *p) { pbm_config_busmastering(&p->pbm_B); p->pbm_B.is_66mhz_capable = 0; @@ -1204,7 +1204,7 @@ static void __init psycho_scan_bus(struct pci_controller_info *p) psycho_register_error_handlers(p); } -static void __init psycho_iommu_init(struct pci_controller_info *p) +static void psycho_iommu_init(struct pci_controller_info *p) { struct pci_iommu *iommu = p->pbm_A.iommu; unsigned long tsbbase, i; @@ -1327,8 +1327,8 @@ static void psycho_controller_hwinit(struct pci_controller_info *p) psycho_write(p->pbm_A.controller_regs + PSYCHO_PCIB_DIAG, tmp); } -static void __init pbm_register_toplevel_resources(struct pci_controller_info *p, - struct pci_pbm_info *pbm) +static void pbm_register_toplevel_resources(struct pci_controller_info *p, + struct pci_pbm_info *pbm) { char *name = pbm->name; @@ -1481,7 +1481,7 @@ static void psycho_pbm_init(struct pci_controller_info *p, #define PSYCHO_CONFIGSPACE 0x001000000UL -void __init psycho_init(int node, char *model_name) +void psycho_init(int node, char *model_name) { struct linux_prom64_registers pr_regs[3]; struct pci_controller_info *p; diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c index 52bf3431a422..0ee6bd5b9ac6 100644 --- a/arch/sparc64/kernel/pci_sabre.c +++ b/arch/sparc64/kernel/pci_sabre.c @@ -554,7 +554,7 @@ static unsigned char sabre_pil_table[] = { /*0x32*/15, /* Power Management */ }; -static int __init sabre_ino_to_pil(struct pci_dev *pdev, unsigned int ino) +static int sabre_ino_to_pil(struct pci_dev *pdev, unsigned int ino) { int ret; @@ -612,9 +612,9 @@ static void sabre_wsync_handler(struct ino_bucket *bucket, void *_arg1, void *_a sabre_read(sync_reg); } -static unsigned int __init sabre_irq_build(struct pci_pbm_info *pbm, - struct pci_dev *pdev, - unsigned int ino) +static unsigned int sabre_irq_build(struct pci_pbm_info *pbm, + struct pci_dev *pdev, + unsigned int ino) { struct ino_bucket *bucket; unsigned long imap, iclr; @@ -1009,7 +1009,7 @@ static irqreturn_t sabre_pcierr_intr(int irq, void *dev_id, struct pt_regs *regs #define SABRE_UE_INO 0x2e #define SABRE_CE_INO 0x2f #define SABRE_PCIERR_INO 0x30 -static void __init sabre_register_error_handlers(struct pci_controller_info *p) +static void sabre_register_error_handlers(struct pci_controller_info *p) { struct pci_pbm_info *pbm = &p->pbm_A; /* arbitrary */ unsigned long base = pbm->controller_regs; @@ -1056,9 +1056,9 @@ static void __init sabre_register_error_handlers(struct pci_controller_info *p) sabre_write(base + SABRE_PCICTRL, tmp); } -static void __init sabre_resource_adjust(struct pci_dev *pdev, - struct resource *res, - struct resource *root) +static void sabre_resource_adjust(struct pci_dev *pdev, + struct resource *res, + struct resource *root) { struct pci_pbm_info *pbm = pdev->bus->sysdata; unsigned long base; @@ -1072,7 +1072,7 @@ static void __init sabre_resource_adjust(struct pci_dev *pdev, res->end += base; } -static void __init sabre_base_address_update(struct pci_dev *pdev, int resource) +static void sabre_base_address_update(struct pci_dev *pdev, int resource) { struct pcidev_cookie *pcp = pdev->sysdata; struct pci_pbm_info *pbm = pcp->pbm; @@ -1118,7 +1118,7 @@ static void __init sabre_base_address_update(struct pci_dev *pdev, int resource) pci_write_config_dword(pdev, where + 4, 0); } -static void __init apb_init(struct pci_controller_info *p, struct pci_bus *sabre_bus) +static void apb_init(struct pci_controller_info *p, struct pci_bus *sabre_bus) { struct pci_dev *pdev; @@ -1181,7 +1181,7 @@ static struct pcidev_cookie *alloc_bridge_cookie(struct pci_pbm_info *pbm) return cookie; } -static void __init sabre_scan_bus(struct pci_controller_info *p) +static void sabre_scan_bus(struct pci_controller_info *p) { static int once; struct pci_bus *sabre_bus, *pbus; @@ -1262,9 +1262,9 @@ static void __init sabre_scan_bus(struct pci_controller_info *p) sabre_register_error_handlers(p); } -static void __init sabre_iommu_init(struct pci_controller_info *p, - int tsbsize, unsigned long dvma_offset, - u32 dma_mask) +static void sabre_iommu_init(struct pci_controller_info *p, + int tsbsize, unsigned long dvma_offset, + u32 dma_mask) { struct pci_iommu *iommu = p->pbm_A.iommu; unsigned long tsbbase, i, order; @@ -1345,8 +1345,8 @@ static void __init sabre_iommu_init(struct pci_controller_info *p, } } -static void __init pbm_register_toplevel_resources(struct pci_controller_info *p, - struct pci_pbm_info *pbm) +static void pbm_register_toplevel_resources(struct pci_controller_info *p, + struct pci_pbm_info *pbm) { char *name = pbm->name; unsigned long ibase = p->pbm_A.controller_regs + SABRE_IOSPACE; @@ -1415,7 +1415,7 @@ static void __init pbm_register_toplevel_resources(struct pci_controller_info *p &pbm->mem_space); } -static void __init sabre_pbm_init(struct pci_controller_info *p, int sabre_node, u32 dma_begin) +static void sabre_pbm_init(struct pci_controller_info *p, int sabre_node, u32 dma_begin) { struct pci_pbm_info *pbm; char namebuf[128]; @@ -1552,7 +1552,7 @@ static void __init sabre_pbm_init(struct pci_controller_info *p, int sabre_node, } } -void __init sabre_init(int pnode, char *model_name) +void sabre_init(int pnode, char *model_name) { struct linux_prom64_registers pr_regs[2]; struct pci_controller_info *p; diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c index 6a182bb66281..331382e1a75d 100644 --- a/arch/sparc64/kernel/pci_schizo.c +++ b/arch/sparc64/kernel/pci_schizo.c @@ -285,7 +285,7 @@ static unsigned char schizo_pil_table[] = { /*0x3f*/0, /* Reserved for NewLink */ }; -static int __init schizo_ino_to_pil(struct pci_dev *pdev, unsigned int ino) +static int schizo_ino_to_pil(struct pci_dev *pdev, unsigned int ino) { int ret; @@ -1221,7 +1221,7 @@ static irqreturn_t schizo_safarierr_intr(int irq, void *dev_id, struct pt_regs * * PCI bus units of the same Tomatillo. I still have not really * figured this out... */ -static void __init tomatillo_register_error_handlers(struct pci_controller_info *p) +static void tomatillo_register_error_handlers(struct pci_controller_info *p) { struct pci_pbm_info *pbm; unsigned int irq; @@ -1359,7 +1359,7 @@ static void __init tomatillo_register_error_handlers(struct pci_controller_info (SCHIZO_SAFIRQCTRL_EN | (BUS_ERROR_UNMAP))); } -static void __init schizo_register_error_handlers(struct pci_controller_info *p) +static void schizo_register_error_handlers(struct pci_controller_info *p) { struct pci_pbm_info *pbm; unsigned int irq; @@ -1505,7 +1505,7 @@ static void __init schizo_register_error_handlers(struct pci_controller_info *p) (SCHIZO_SAFIRQCTRL_EN | (BUS_ERROR_UNMAP))); } -static void __init pbm_config_busmastering(struct pci_pbm_info *pbm) +static void pbm_config_busmastering(struct pci_pbm_info *pbm) { u8 *addr; @@ -1522,8 +1522,8 @@ static void __init pbm_config_busmastering(struct pci_pbm_info *pbm) pci_config_write8(addr, 64); } -static void __init pbm_scan_bus(struct pci_controller_info *p, - struct pci_pbm_info *pbm) +static void pbm_scan_bus(struct pci_controller_info *p, + struct pci_pbm_info *pbm) { struct pcidev_cookie *cookie = kmalloc(sizeof(*cookie), GFP_KERNEL); @@ -1550,8 +1550,8 @@ static void __init pbm_scan_bus(struct pci_controller_info *p, pci_setup_busmastering(pbm, pbm->pci_bus); } -static void __init __schizo_scan_bus(struct pci_controller_info *p, - int chip_type) +static void __schizo_scan_bus(struct pci_controller_info *p, + int chip_type) { if (!p->pbm_B.prom_node || !p->pbm_A.prom_node) { printk("PCI: Only one PCI bus module of controller found.\n"); @@ -1577,17 +1577,17 @@ static void __init __schizo_scan_bus(struct pci_controller_info *p, schizo_register_error_handlers(p); } -static void __init schizo_scan_bus(struct pci_controller_info *p) +static void schizo_scan_bus(struct pci_controller_info *p) { __schizo_scan_bus(p, PBM_CHIP_TYPE_SCHIZO); } -static void __init tomatillo_scan_bus(struct pci_controller_info *p) +static void tomatillo_scan_bus(struct pci_controller_info *p) { __schizo_scan_bus(p, PBM_CHIP_TYPE_TOMATILLO); } -static void __init schizo_base_address_update(struct pci_dev *pdev, int resource) +static void schizo_base_address_update(struct pci_dev *pdev, int resource) { struct pcidev_cookie *pcp = pdev->sysdata; struct pci_pbm_info *pbm = pcp->pbm; @@ -1632,9 +1632,9 @@ static void __init schizo_base_address_update(struct pci_dev *pdev, int resource pci_write_config_dword(pdev, where + 4, 0); } -static void __init schizo_resource_adjust(struct pci_dev *pdev, - struct resource *res, - struct resource *root) +static void schizo_resource_adjust(struct pci_dev *pdev, + struct resource *res, + struct resource *root) { res->start += root->start; res->end += root->start; @@ -1702,8 +1702,8 @@ static void schizo_determine_mem_io_space(struct pci_pbm_info *pbm) pbm->mem_space.start); } -static void __init pbm_register_toplevel_resources(struct pci_controller_info *p, - struct pci_pbm_info *pbm) +static void pbm_register_toplevel_resources(struct pci_controller_info *p, + struct pci_pbm_info *pbm) { pbm->io_space.name = pbm->mem_space.name = pbm->name; @@ -1932,7 +1932,7 @@ static void schizo_pbm_iommu_init(struct pci_pbm_info *pbm) #define TOMATILLO_PCI_IOC_TDIAG (0x2250UL) #define TOMATILLO_PCI_IOC_DDIAG (0x2290UL) -static void __init schizo_pbm_hw_init(struct pci_pbm_info *pbm) +static void schizo_pbm_hw_init(struct pci_pbm_info *pbm) { u64 tmp; @@ -1986,9 +1986,9 @@ static void __init schizo_pbm_hw_init(struct pci_pbm_info *pbm) } } -static void __init schizo_pbm_init(struct pci_controller_info *p, - int prom_node, u32 portid, - int chip_type) +static void schizo_pbm_init(struct pci_controller_info *p, + int prom_node, u32 portid, + int chip_type) { struct linux_prom64_registers pr_regs[4]; unsigned int busrange[2]; @@ -2145,7 +2145,7 @@ static inline int portid_compare(u32 x, u32 y, int chip_type) return (x == y); } -static void __init __schizo_init(int node, char *model_name, int chip_type) +static void __schizo_init(int node, char *model_name, int chip_type) { struct pci_controller_info *p; struct pci_iommu *iommu; @@ -2213,17 +2213,17 @@ static void __init __schizo_init(int node, char *model_name, int chip_type) schizo_pbm_init(p, node, portid, chip_type); } -void __init schizo_init(int node, char *model_name) +void schizo_init(int node, char *model_name) { __schizo_init(node, model_name, PBM_CHIP_TYPE_SCHIZO); } -void __init schizo_plus_init(int node, char *model_name) +void schizo_plus_init(int node, char *model_name) { __schizo_init(node, model_name, PBM_CHIP_TYPE_SCHIZO_PLUS); } -void __init tomatillo_init(int node, char *model_name) +void tomatillo_init(int node, char *model_name) { __schizo_init(node, model_name, PBM_CHIP_TYPE_TOMATILLO); } diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index d89fc24808d3..7d9a0f6c437d 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -403,12 +403,3 @@ EXPORT_SYMBOL(xor_vis_4); EXPORT_SYMBOL(xor_vis_5); EXPORT_SYMBOL(prom_palette); - -/* memory barriers */ -EXPORT_SYMBOL(mb); -EXPORT_SYMBOL(rmb); -EXPORT_SYMBOL(wmb); -EXPORT_SYMBOL(membar_storeload); -EXPORT_SYMBOL(membar_storeload_storestore); -EXPORT_SYMBOL(membar_storeload_loadload); -EXPORT_SYMBOL(membar_storestore_loadstore); diff --git a/arch/sparc64/lib/Makefile b/arch/sparc64/lib/Makefile index 6201f1040982..40dbeec7e5d6 100644 --- a/arch/sparc64/lib/Makefile +++ b/arch/sparc64/lib/Makefile @@ -12,7 +12,7 @@ lib-y := PeeCeeI.o copy_page.o clear_page.o strlen.o strncmp.o \ U1memcpy.o U1copy_from_user.o U1copy_to_user.o \ U3memcpy.o U3copy_from_user.o U3copy_to_user.o U3patch.o \ copy_in_user.o user_fixup.o memmove.o \ - mcount.o ipcsum.o rwsem.o xor.o find_bit.o delay.o mb.o + mcount.o ipcsum.o rwsem.o xor.o find_bit.o delay.o lib-$(CONFIG_DEBUG_SPINLOCK) += debuglocks.o lib-$(CONFIG_HAVE_DEC_LOCK) += dec_and_lock.o diff --git a/arch/sparc64/lib/mb.S b/arch/sparc64/lib/mb.S deleted file mode 100644 index 4004f748619f..000000000000 --- a/arch/sparc64/lib/mb.S +++ /dev/null @@ -1,73 +0,0 @@ -/* mb.S: Out of line memory barriers. - * - * Copyright (C) 2005 David S. Miller (davem@davemloft.net) - */ - - /* These are here in an effort to more fully work around - * Spitfire Errata #51. Essentially, if a memory barrier - * occurs soon after a mispredicted branch, the chip can stop - * executing instructions until a trap occurs. Therefore, if - * interrupts are disabled, the chip can hang forever. - * - * It used to be believed that the memory barrier had to be - * right in the delay slot, but a case has been traced - * recently wherein the memory barrier was one instruction - * after the branch delay slot and the chip still hung. The - * offending sequence was the following in sym_wakeup_done() - * of the sym53c8xx_2 driver: - * - * call sym_ccb_from_dsa, 0 - * movge %icc, 0, %l0 - * brz,pn %o0, .LL1303 - * mov %o0, %l2 - * membar #LoadLoad - * - * The branch has to be mispredicted for the bug to occur. - * Therefore, we put the memory barrier explicitly into a - * "branch always, predicted taken" delay slot to avoid the - * problem case. - */ - - .text - -99: retl - nop - - .globl mb -mb: ba,pt %xcc, 99b - membar #LoadLoad | #LoadStore | #StoreStore | #StoreLoad - .size mb, .-mb - - .globl rmb -rmb: ba,pt %xcc, 99b - membar #LoadLoad - .size rmb, .-rmb - - .globl wmb -wmb: ba,pt %xcc, 99b - membar #StoreStore - .size wmb, .-wmb - - .globl membar_storeload -membar_storeload: - ba,pt %xcc, 99b - membar #StoreLoad - .size membar_storeload, .-membar_storeload - - .globl membar_storeload_storestore -membar_storeload_storestore: - ba,pt %xcc, 99b - membar #StoreLoad | #StoreStore - .size membar_storeload_storestore, .-membar_storeload_storestore - - .globl membar_storeload_loadload -membar_storeload_loadload: - ba,pt %xcc, 99b - membar #StoreLoad | #LoadLoad - .size membar_storeload_loadload, .-membar_storeload_loadload - - .globl membar_storestore_loadstore -membar_storestore_loadstore: - ba,pt %xcc, 99b - membar #StoreStore | #LoadStore - .size membar_storestore_loadstore, .-membar_storestore_loadstore diff --git a/arch/sparc64/solaris/ioctl.c b/arch/sparc64/solaris/ioctl.c index cac0a1cf0050..be0a054e3ed6 100644 --- a/arch/sparc64/solaris/ioctl.c +++ b/arch/sparc64/solaris/ioctl.c @@ -24,6 +24,7 @@ #include <linux/netdevice.h> #include <linux/mtio.h> #include <linux/time.h> +#include <linux/rcupdate.h> #include <linux/compat.h> #include <net/sock.h> @@ -293,16 +294,18 @@ static struct module_info { static inline int solaris_sockmod(unsigned int fd, unsigned int cmd, u32 arg) { struct inode *ino; + struct fdtable *fdt; /* I wonder which of these tests are superfluous... --patrik */ - spin_lock(¤t->files->file_lock); - if (! current->files->fd[fd] || - ! current->files->fd[fd]->f_dentry || - ! (ino = current->files->fd[fd]->f_dentry->d_inode) || + rcu_read_lock(); + fdt = files_fdtable(current->files); + if (! fdt->fd[fd] || + ! fdt->fd[fd]->f_dentry || + ! (ino = fdt->fd[fd]->f_dentry->d_inode) || ! S_ISSOCK(ino->i_mode)) { - spin_unlock(¤t->files->file_lock); + rcu_read_unlock(); return TBADF; } - spin_unlock(¤t->files->file_lock); + rcu_read_unlock(); switch (cmd & 0xff) { case 109: /* SI_SOCKPARAMS */ diff --git a/arch/sparc64/solaris/timod.c b/arch/sparc64/solaris/timod.c index 022c80f43392..aaad29c35c83 100644 --- a/arch/sparc64/solaris/timod.c +++ b/arch/sparc64/solaris/timod.c @@ -143,9 +143,11 @@ static struct T_primsg *timod_mkctl(int size) static void timod_wake_socket(unsigned int fd) { struct socket *sock; + struct fdtable *fdt; SOLD("wakeing socket"); - sock = SOCKET_I(current->files->fd[fd]->f_dentry->d_inode); + fdt = files_fdtable(current->files); + sock = SOCKET_I(fdt->fd[fd]->f_dentry->d_inode); wake_up_interruptible(&sock->wait); read_lock(&sock->sk->sk_callback_lock); if (sock->fasync_list && !test_bit(SOCK_ASYNC_WAITDATA, &sock->flags)) @@ -157,9 +159,11 @@ static void timod_wake_socket(unsigned int fd) static void timod_queue(unsigned int fd, struct T_primsg *it) { struct sol_socket_struct *sock; + struct fdtable *fdt; SOLD("queuing primsg"); - sock = (struct sol_socket_struct *)current->files->fd[fd]->private_data; + fdt = files_fdtable(current->files); + sock = (struct sol_socket_struct *)fdt->fd[fd]->private_data; it->next = sock->pfirst; sock->pfirst = it; if (!sock->plast) @@ -171,9 +175,11 @@ static void timod_queue(unsigned int fd, struct T_primsg *it) static void timod_queue_end(unsigned int fd, struct T_primsg *it) { struct sol_socket_struct *sock; + struct fdtable *fdt; SOLD("queuing primsg at end"); - sock = (struct sol_socket_struct *)current->files->fd[fd]->private_data; + fdt = files_fdtable(current->files); + sock = (struct sol_socket_struct *)fdt->fd[fd]->private_data; it->next = NULL; if (sock->plast) sock->plast->next = it; @@ -344,6 +350,7 @@ int timod_putmsg(unsigned int fd, char __user *ctl_buf, int ctl_len, char *buf; struct file *filp; struct inode *ino; + struct fdtable *fdt; struct sol_socket_struct *sock; mm_segment_t old_fs = get_fs(); long args[6]; @@ -351,7 +358,9 @@ int timod_putmsg(unsigned int fd, char __user *ctl_buf, int ctl_len, (int (*)(int, unsigned long __user *))SYS(socketcall); int (*sys_sendto)(int, void __user *, size_t, unsigned, struct sockaddr __user *, int) = (int (*)(int, void __user *, size_t, unsigned, struct sockaddr __user *, int))SYS(sendto); - filp = current->files->fd[fd]; + + fdt = files_fdtable(current->files); + filp = fdt->fd[fd]; ino = filp->f_dentry->d_inode; sock = (struct sol_socket_struct *)filp->private_data; SOLD("entry"); @@ -620,6 +629,7 @@ int timod_getmsg(unsigned int fd, char __user *ctl_buf, int ctl_maxlen, s32 __us int oldflags; struct file *filp; struct inode *ino; + struct fdtable *fdt; struct sol_socket_struct *sock; struct T_unitdata_ind udi; mm_segment_t old_fs = get_fs(); @@ -632,7 +642,8 @@ int timod_getmsg(unsigned int fd, char __user *ctl_buf, int ctl_maxlen, s32 __us SOLD("entry"); SOLDD(("%u %p %d %p %p %d %p %d\n", fd, ctl_buf, ctl_maxlen, ctl_len, data_buf, data_maxlen, data_len, *flags_p)); - filp = current->files->fd[fd]; + fdt = files_fdtable(current->files); + filp = fdt->fd[fd]; ino = filp->f_dentry->d_inode; sock = (struct sol_socket_struct *)filp->private_data; SOLDD(("%p %p\n", sock->pfirst, sock->pfirst ? sock->pfirst->next : NULL)); @@ -844,12 +855,14 @@ asmlinkage int solaris_getmsg(unsigned int fd, u32 arg1, u32 arg2, u32 arg3) int __user *flgptr; int flags; int error = -EBADF; + struct fdtable *fdt; SOLD("entry"); lock_kernel(); if(fd >= NR_OPEN) goto out; - filp = current->files->fd[fd]; + fdt = files_fdtable(current->files); + filp = fdt->fd[fd]; if(!filp) goto out; ino = filp->f_dentry->d_inode; @@ -910,12 +923,14 @@ asmlinkage int solaris_putmsg(unsigned int fd, u32 arg1, u32 arg2, u32 arg3) struct strbuf ctl, dat; int flags = (int) arg3; int error = -EBADF; + struct fdtable *fdt; SOLD("entry"); lock_kernel(); if(fd >= NR_OPEN) goto out; - filp = current->files->fd[fd]; + fdt = files_fdtable(current->files); + filp = fdt->fd[fd]; if(!filp) goto out; ino = filp->f_dentry->d_inode; diff --git a/arch/um/Makefile-x86_64 b/arch/um/Makefile-x86_64 index baddb5d64ca5..436abbba409b 100644 --- a/arch/um/Makefile-x86_64 +++ b/arch/um/Makefile-x86_64 @@ -8,6 +8,7 @@ START := 0x60000000 #it's needed for headers to work! CFLAGS += -U__$(SUBARCH)__ -fno-builtin USER_CFLAGS += -fno-builtin +CHECKFLAGS += -m64 ELF_ARCH := i386:x86-64 ELF_FORMAT := elf64-x86-64 diff --git a/arch/um/kernel/skas/include/uaccess-skas.h b/arch/um/kernel/skas/include/uaccess-skas.h index cd6c280482cb..6ee3f3902e68 100644 --- a/arch/um/kernel/skas/include/uaccess-skas.h +++ b/arch/um/kernel/skas/include/uaccess-skas.h @@ -18,18 +18,18 @@ ((unsigned long) (addr) + (size) <= FIXADDR_USER_END) && \ ((unsigned long) (addr) + (size) >= (unsigned long)(addr)))) -static inline int verify_area_skas(int type, const void * addr, +static inline int verify_area_skas(int type, const void __user * addr, unsigned long size) { return(access_ok_skas(type, addr, size) ? 0 : -EFAULT); } -extern int copy_from_user_skas(void *to, const void *from, int n); -extern int copy_to_user_skas(void *to, const void *from, int n); -extern int strncpy_from_user_skas(char *dst, const char *src, int count); -extern int __clear_user_skas(void *mem, int len); -extern int clear_user_skas(void *mem, int len); -extern int strnlen_user_skas(const void *str, int len); +extern int copy_from_user_skas(void *to, const void __user *from, int n); +extern int copy_to_user_skas(void __user *to, const void *from, int n); +extern int strncpy_from_user_skas(char *dst, const char __user *src, int count); +extern int __clear_user_skas(void __user *mem, int len); +extern int clear_user_skas(void __user *mem, int len); +extern int strnlen_user_skas(const void __user *str, int len); #endif diff --git a/arch/um/kernel/tt/include/uaccess-tt.h b/arch/um/kernel/tt/include/uaccess-tt.h index 3fbb5fe26f49..aa6db384af80 100644 --- a/arch/um/kernel/tt/include/uaccess-tt.h +++ b/arch/um/kernel/tt/include/uaccess-tt.h @@ -33,7 +33,7 @@ extern unsigned long uml_physmem; (((unsigned long) (addr) <= ((unsigned long) (addr) + (size))) && \ (under_task_size(addr, size) || is_stack(addr, size)))) -static inline int verify_area_tt(int type, const void * addr, +static inline int verify_area_tt(int type, const void __user * addr, unsigned long size) { return(access_ok_tt(type, addr, size) ? 0 : -EFAULT); @@ -50,12 +50,12 @@ extern int __do_clear_user(void *mem, size_t len, void **fault_addr, extern int __do_strnlen_user(const char *str, unsigned long n, void **fault_addr, void **fault_catcher); -extern int copy_from_user_tt(void *to, const void *from, int n); -extern int copy_to_user_tt(void *to, const void *from, int n); -extern int strncpy_from_user_tt(char *dst, const char *src, int count); -extern int __clear_user_tt(void *mem, int len); -extern int clear_user_tt(void *mem, int len); -extern int strnlen_user_tt(const void *str, int len); +extern int copy_from_user_tt(void *to, const void __user *from, int n); +extern int copy_to_user_tt(void __user *to, const void *from, int n); +extern int strncpy_from_user_tt(char *dst, const char __user *src, int count); +extern int __clear_user_tt(void __user *mem, int len); +extern int clear_user_tt(void __user *mem, int len); +extern int strnlen_user_tt(const void __user *str, int len); #endif diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules index 17f305b6bade..59a1291f477e 100644 --- a/arch/um/scripts/Makefile.rules +++ b/arch/um/scripts/Makefile.rules @@ -9,6 +9,11 @@ USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file)) $(USER_OBJS) : c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) \ $(CFLAGS_$(notdir $@)) +$(USER_OBJS): cmd_checksrc = +$(USER_OBJS): quiet_cmd_checksrc = +$(USER_OBJS): cmd_force_checksrc = +$(USER_OBJS): quiet_cmd_force_checksrc = + # The stubs and unmap.o can't try to call mcount or update basic block data define unprofile diff --git a/arch/x86_64/ia32/ia32_ioctl.c b/arch/x86_64/ia32/ia32_ioctl.c index d259f8a6f811..419758f19ca4 100644 --- a/arch/x86_64/ia32/ia32_ioctl.c +++ b/arch/x86_64/ia32/ia32_ioctl.c @@ -24,17 +24,26 @@ static int tiocgdev(unsigned fd, unsigned cmd, unsigned int __user *ptr) { - struct file *file = fget(fd); + struct file *file; struct tty_struct *real_tty; + int fput_needed, ret; + file = fget_light(fd, &fput_needed); if (!file) return -EBADF; + + ret = -EINVAL; if (file->f_op->ioctl != tty_ioctl) - return -EINVAL; + goto out; real_tty = (struct tty_struct *)file->private_data; if (!real_tty) - return -EINVAL; - return put_user(new_encode_dev(tty_devnum(real_tty)), ptr); + goto out; + + ret = put_user(new_encode_dev(tty_devnum(real_tty)), ptr); + +out: + fput_light(file, fput_needed); + return ret; } #define RTC_IRQP_READ32 _IOR('p', 0x0b, unsigned int) /* Read IRQ rate */ diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c index 116ac5f53dce..bb0ae18ec02b 100644 --- a/arch/x86_64/kernel/e820.c +++ b/arch/x86_64/kernel/e820.c @@ -567,7 +567,7 @@ unsigned long pci_mem_start = 0xaeedbabe; */ __init void e820_setup_gap(void) { - unsigned long gapstart, gapsize; + unsigned long gapstart, gapsize, round; unsigned long last; int i; int found = 0; @@ -604,14 +604,14 @@ __init void e820_setup_gap(void) } /* - * Start allocating dynamic PCI memory a bit into the gap, - * aligned up to the nearest megabyte. - * - * Question: should we try to pad it up a bit (do something - * like " + (gapsize >> 3)" in there too?). We now have the - * technology. + * See how much we want to round up: start off with + * rounding to the next 1MB area. */ - pci_mem_start = (gapstart + 0xfffff) & ~0xfffff; + round = 0x100000; + while ((gapsize >> 4) > round) + round += round; + /* Fun with two's complement */ + pci_mem_start = (gapstart + round) & -round; printk(KERN_INFO "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n", pci_mem_start, gapstart, gapsize); diff --git a/arch/x86_64/kernel/genapic_flat.c b/arch/x86_64/kernel/genapic_flat.c index adc96282a9e2..6d57da96bf8c 100644 --- a/arch/x86_64/kernel/genapic_flat.c +++ b/arch/x86_64/kernel/genapic_flat.c @@ -78,8 +78,18 @@ static void flat_send_IPI_mask(cpumask_t cpumask, int vector) static void flat_send_IPI_allbutself(int vector) { +#ifndef CONFIG_HOTPLUG_CPU if (((num_online_cpus()) - 1) >= 1) __send_IPI_shortcut(APIC_DEST_ALLBUT, vector,APIC_DEST_LOGICAL); +#else + cpumask_t allbutme = cpu_online_map; + int me = get_cpu(); /* Ensure we are not preempted when we clear */ + cpu_clear(me, allbutme); + + if (!cpus_empty(allbutme)) + flat_send_IPI_mask(allbutme, vector); + put_cpu(); +#endif } static void flat_send_IPI_all(int vector) diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 40e0aca088fb..5f1529be1237 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -1167,9 +1167,9 @@ void disable_IO_APIC(void) clear_IO_APIC(); /* - * If the i82559 is routed through an IOAPIC + * If the i8259 is routed through an IOAPIC * Put that IOAPIC in virtual wire mode - * so legacy interrups can be delivered. + * so legacy interrupts can be delivered. */ pin = find_isa_irq_pin(0, mp_ExtINT); if (pin != -1) { diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 90aeccd15190..4fb34b5cb1f9 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -894,23 +894,6 @@ static __init void disable_smp(void) cpu_set(0, cpu_core_map[0]); } -/* - * Handle user cpus=... parameter. - */ -static __init void enforce_max_cpus(unsigned max_cpus) -{ - int i, k; - k = 0; - for (i = 0; i < NR_CPUS; i++) { - if (!cpu_possible(i)) - continue; - if (++k > max_cpus) { - cpu_clear(i, cpu_possible_map); - cpu_clear(i, cpu_present_map); - } - } -} - #ifdef CONFIG_HOTPLUG_CPU /* * cpu_possible_map should be static, it cannot change as cpu's @@ -999,8 +982,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) current_cpu_data = boot_cpu_data; current_thread_info()->cpu = 0; /* needed? */ - enforce_max_cpus(max_cpus); - #ifdef CONFIG_HOTPLUG_CPU prefill_possible_map(); #endif |