diff options
Diffstat (limited to 'arch')
1139 files changed, 26148 insertions, 28054 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 189d5eababa8..786491f9ceb2 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -479,6 +479,9 @@ config EISA depends on ALPHA_GENERIC || ALPHA_JENSEN || ALPHA_ALCOR || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_RAWHIDE default y +config ARCH_MAY_HAVE_PC_FDC + def_bool y + config SMP bool "Symmetric multi-processing support" depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile index 22ebfb2be0e4..1b704ee54bf3 100644 --- a/arch/alpha/Makefile +++ b/arch/alpha/Makefile @@ -108,20 +108,9 @@ $(boot)/vmlinux.gz: vmlinux bootimage bootpfile bootpzfile: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ - -prepare: include/asm-$(ARCH)/asm_offsets.h - -arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \ - include/config/MARKER - -include/asm-$(ARCH)/asm_offsets.h: arch/$(ARCH)/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) - archclean: $(Q)$(MAKE) $(clean)=$(boot) -CLEAN_FILES += include/asm-$(ARCH)/asm_offsets.h - define archhelp echo '* boot - Compressed kernel image (arch/alpha/boot/vmlinux.gz)' echo ' bootimage - SRM bootable image (arch/alpha/boot/bootimage)' diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c index fc5ef90c4fc9..24ae9a366073 100644 --- a/arch/alpha/kernel/alpha_ksyms.c +++ b/arch/alpha/kernel/alpha_ksyms.c @@ -185,15 +185,6 @@ EXPORT_SYMBOL(smp_num_cpus); EXPORT_SYMBOL(smp_call_function); EXPORT_SYMBOL(smp_call_function_on_cpu); EXPORT_SYMBOL(_atomic_dec_and_lock); -#ifdef CONFIG_DEBUG_SPINLOCK -EXPORT_SYMBOL(_raw_spin_unlock); -EXPORT_SYMBOL(debug_spin_lock); -EXPORT_SYMBOL(debug_spin_trylock); -#endif -#ifdef CONFIG_DEBUG_RWLOCK -EXPORT_SYMBOL(_raw_write_lock); -EXPORT_SYMBOL(_raw_read_lock); -#endif EXPORT_SYMBOL(cpu_present_mask); #endif /* CONFIG_SMP */ diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S index f0927ee53f29..76cc0cb5fc2e 100644 --- a/arch/alpha/kernel/entry.S +++ b/arch/alpha/kernel/entry.S @@ -5,7 +5,7 @@ */ #include <linux/config.h> -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> #include <asm/thread_info.h> #include <asm/pal.h> #include <asm/errno.h> diff --git a/arch/alpha/kernel/head.S b/arch/alpha/kernel/head.S index 4ca2e404708a..0905721fcbca 100644 --- a/arch/alpha/kernel/head.S +++ b/arch/alpha/kernel/head.S @@ -9,7 +9,7 @@ #include <linux/config.h> #include <asm/system.h> -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> .globl swapper_pg_dir .globl _stext diff --git a/arch/alpha/kernel/module.c b/arch/alpha/kernel/module.c index fc271e316a38..aac6d4b22f7a 100644 --- a/arch/alpha/kernel/module.c +++ b/arch/alpha/kernel/module.c @@ -47,7 +47,7 @@ module_free(struct module *mod, void *module_region) struct got_entry { struct got_entry *next; - Elf64_Addr r_offset; + Elf64_Sxword r_addend; int got_offset; }; @@ -57,14 +57,14 @@ process_reloc_for_got(Elf64_Rela *rela, { unsigned long r_sym = ELF64_R_SYM (rela->r_info); unsigned long r_type = ELF64_R_TYPE (rela->r_info); - Elf64_Addr r_offset = rela->r_offset; + Elf64_Sxword r_addend = rela->r_addend; struct got_entry *g; if (r_type != R_ALPHA_LITERAL) return; for (g = chains + r_sym; g ; g = g->next) - if (g->r_offset == r_offset) { + if (g->r_addend == r_addend) { if (g->got_offset == 0) { g->got_offset = *poffset; *poffset += 8; @@ -74,7 +74,7 @@ process_reloc_for_got(Elf64_Rela *rela, g = kmalloc (sizeof (*g), GFP_KERNEL); g->next = chains[r_sym].next; - g->r_offset = r_offset; + g->r_addend = r_addend; g->got_offset = *poffset; *poffset += 8; chains[r_sym].next = g; diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 167fd89f8707..0636116210d2 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -974,6 +974,7 @@ osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, size_t size; long timeout; int ret = -EINVAL; + struct fdtable *fdt; timeout = MAX_SCHEDULE_TIMEOUT; if (tvp) { @@ -995,7 +996,8 @@ osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, } } - if (n < 0 || n > current->files->max_fdset) + fdt = files_fdtable(current->files); + if (n < 0 || n > fdt->max_fdset) goto out_nofds; /* @@ -1152,8 +1154,7 @@ osf_usleep_thread(struct timeval32 __user *sleep, struct timeval32 __user *remai ticks = timeval_to_jiffies(&tmp); - current->state = TASK_INTERRUPTIBLE; - ticks = schedule_timeout(ticks); + ticks = schedule_timeout_interruptible(ticks); if (remain) { jiffies_to_timeval(ticks, &tmp); diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c index 08fe8071a7f8..2e45e8604e32 100644 --- a/arch/alpha/kernel/signal.c +++ b/arch/alpha/kernel/signal.c @@ -566,13 +566,12 @@ handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info, if (ka->sa.sa_flags & SA_RESETHAND) ka->sa.sa_handler = SIG_DFL; - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); } static inline void diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c index e211aa7404e6..da0be3465791 100644 --- a/arch/alpha/kernel/smp.c +++ b/arch/alpha/kernel/smp.c @@ -989,175 +989,3 @@ flush_icache_user_range(struct vm_area_struct *vma, struct page *page, preempt_enable(); } - -#ifdef CONFIG_DEBUG_SPINLOCK -void -_raw_spin_unlock(spinlock_t * lock) -{ - mb(); - lock->lock = 0; - - lock->on_cpu = -1; - lock->previous = NULL; - lock->task = NULL; - lock->base_file = "none"; - lock->line_no = 0; -} - -void -debug_spin_lock(spinlock_t * lock, const char *base_file, int line_no) -{ - long tmp; - long stuck; - void *inline_pc = __builtin_return_address(0); - unsigned long started = jiffies; - int printed = 0; - int cpu = smp_processor_id(); - - stuck = 1L << 30; - try_again: - - /* Use sub-sections to put the actual loop at the end - of this object file's text section so as to perfect - branch prediction. */ - __asm__ __volatile__( - "1: ldl_l %0,%1\n" - " subq %2,1,%2\n" - " blbs %0,2f\n" - " or %0,1,%0\n" - " stl_c %0,%1\n" - " beq %0,3f\n" - "4: mb\n" - ".subsection 2\n" - "2: ldl %0,%1\n" - " subq %2,1,%2\n" - "3: blt %2,4b\n" - " blbs %0,2b\n" - " br 1b\n" - ".previous" - : "=r" (tmp), "=m" (lock->lock), "=r" (stuck) - : "m" (lock->lock), "2" (stuck) : "memory"); - - if (stuck < 0) { - printk(KERN_WARNING - "%s:%d spinlock stuck in %s at %p(%d)" - " owner %s at %p(%d) %s:%d\n", - base_file, line_no, - current->comm, inline_pc, cpu, - lock->task->comm, lock->previous, - lock->on_cpu, lock->base_file, lock->line_no); - stuck = 1L << 36; - printed = 1; - goto try_again; - } - - /* Exiting. Got the lock. */ - lock->on_cpu = cpu; - lock->previous = inline_pc; - lock->task = current; - lock->base_file = base_file; - lock->line_no = line_no; - - if (printed) { - printk(KERN_WARNING - "%s:%d spinlock grabbed in %s at %p(%d) %ld ticks\n", - base_file, line_no, current->comm, inline_pc, - cpu, jiffies - started); - } -} - -int -debug_spin_trylock(spinlock_t * lock, const char *base_file, int line_no) -{ - int ret; - if ((ret = !test_and_set_bit(0, lock))) { - lock->on_cpu = smp_processor_id(); - lock->previous = __builtin_return_address(0); - lock->task = current; - } else { - lock->base_file = base_file; - lock->line_no = line_no; - } - return ret; -} -#endif /* CONFIG_DEBUG_SPINLOCK */ - -#ifdef CONFIG_DEBUG_RWLOCK -void _raw_write_lock(rwlock_t * lock) -{ - long regx, regy; - int stuck_lock, stuck_reader; - void *inline_pc = __builtin_return_address(0); - - try_again: - - stuck_lock = 1<<30; - stuck_reader = 1<<30; - - __asm__ __volatile__( - "1: ldl_l %1,%0\n" - " blbs %1,6f\n" - " blt %1,8f\n" - " mov 1,%1\n" - " stl_c %1,%0\n" - " beq %1,6f\n" - "4: mb\n" - ".subsection 2\n" - "6: blt %3,4b # debug\n" - " subl %3,1,%3 # debug\n" - " ldl %1,%0\n" - " blbs %1,6b\n" - "8: blt %4,4b # debug\n" - " subl %4,1,%4 # debug\n" - " ldl %1,%0\n" - " blt %1,8b\n" - " br 1b\n" - ".previous" - : "=m" (*(volatile int *)lock), "=&r" (regx), "=&r" (regy), - "=&r" (stuck_lock), "=&r" (stuck_reader) - : "m" (*(volatile int *)lock), "3" (stuck_lock), "4" (stuck_reader) : "memory"); - - if (stuck_lock < 0) { - printk(KERN_WARNING "write_lock stuck at %p\n", inline_pc); - goto try_again; - } - if (stuck_reader < 0) { - printk(KERN_WARNING "write_lock stuck on readers at %p\n", - inline_pc); - goto try_again; - } -} - -void _raw_read_lock(rwlock_t * lock) -{ - long regx; - int stuck_lock; - void *inline_pc = __builtin_return_address(0); - - try_again: - - stuck_lock = 1<<30; - - __asm__ __volatile__( - "1: ldl_l %1,%0;" - " blbs %1,6f;" - " subl %1,2,%1;" - " stl_c %1,%0;" - " beq %1,6f;" - "4: mb\n" - ".subsection 2\n" - "6: ldl %1,%0;" - " blt %2,4b # debug\n" - " subl %2,1,%2 # debug\n" - " blbs %1,6b;" - " br 1b\n" - ".previous" - : "=m" (*(volatile int *)lock), "=&r" (regx), "=&r" (stuck_lock) - : "m" (*(volatile int *)lock), "2" (stuck_lock) : "memory"); - - if (stuck_lock < 0) { - printk(KERN_WARNING "read_lock stuck at %p\n", inline_pc); - goto try_again; - } -} -#endif /* CONFIG_DEBUG_RWLOCK */ diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c index 804727853d25..e32fee505220 100644 --- a/arch/alpha/kernel/sys_marvel.c +++ b/arch/alpha/kernel/sys_marvel.c @@ -373,12 +373,11 @@ marvel_map_irq(struct pci_dev *dev, u8 slot, u8 pin) irq += 0x80; /* offset for lsi */ #if 1 - printk("PCI:%d:%d:%d (hose %d) [%s] is using MSI\n", + printk("PCI:%d:%d:%d (hose %d) is using MSI\n", dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), - hose->index, - pci_pretty_name (dev)); + hose->index); printk(" %d message(s) from 0x%04x\n", 1 << ((msg_ctl & PCI_MSI_FLAGS_QSIZE) >> 4), msg_dat); diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c index 8226c5cd788c..67be50b7d80a 100644 --- a/arch/alpha/kernel/time.c +++ b/arch/alpha/kernel/time.c @@ -149,7 +149,7 @@ irqreturn_t timer_interrupt(int irq, void *dev, struct pt_regs * regs) * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 + if (ntp_synced() && xtime.tv_sec > state.last_rtc_update + 660 && xtime.tv_nsec >= 500000 - ((unsigned) TICK_SIZE) / 2 && xtime.tv_nsec <= 500000 + ((unsigned) TICK_SIZE) / 2) { @@ -502,10 +502,7 @@ do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); diff --git a/arch/alpha/lib/dbg_stackcheck.S b/arch/alpha/lib/dbg_stackcheck.S index cc5ce3a5fcad..3c1f3e6522e5 100644 --- a/arch/alpha/lib/dbg_stackcheck.S +++ b/arch/alpha/lib/dbg_stackcheck.S @@ -5,7 +5,7 @@ * Verify that we have not overflowed the stack. Oops if we have. */ -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> .text .set noat diff --git a/arch/alpha/lib/dbg_stackkill.S b/arch/alpha/lib/dbg_stackkill.S index e09f2ae1e09e..e9f6a9dcf2b7 100644 --- a/arch/alpha/lib/dbg_stackkill.S +++ b/arch/alpha/lib/dbg_stackkill.S @@ -6,7 +6,7 @@ * uninitialized local variables in the act. */ -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> .text .set noat diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c65c6eb9810d..11fff042aa81 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -64,6 +64,9 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_BUST_SPINLOCK bool +config ARCH_MAY_HAVE_PC_FDC + bool + config GENERIC_ISA_DMA bool @@ -150,6 +153,7 @@ config ARCH_RPC select ARCH_ACORN select FIQ select TIMER_ACORN + select ARCH_MAY_HAVE_PC_FDC help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -322,8 +326,8 @@ config SMP processor machines. On a single processor machine, the kernel will run faster if you say N here. - See also the <file:Documentation/smp.tex>, - <file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>, + See also the <file:Documentation/smp.txt>, + <file:Documentation/i386/IO-APIC.txt>, <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at <http://www.linuxdoc.org/docs.html#howto>. @@ -365,8 +369,8 @@ config NO_IDLE_HZ Please note that dynamic tick may affect the accuracy of timekeeping on some platforms depending on the implementation. - Currently at least OMAP platform is known to have accurate - timekeeping with dynamic tick. + Currently at least OMAP, PXA2xx and SA11x0 platforms are known + to have accurate timekeeping with dynamic tick. config ARCH_DISCONTIGMEM_ENABLE bool @@ -635,10 +639,6 @@ config PM and the Battery Powered Linux mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - Note that, even if you say N here, Linux on the x86 architecture - will issue the hlt instruction if nothing is to be done, thereby - sending the processor to sleep and saving power. - config APM tristate "Advanced Power Management Emulation" depends on PM @@ -650,12 +650,6 @@ config APM battery status information, and user-space programs will receive notification of APM "events" (e.g. battery status change). - If you select "Y" here, you can disable actual use of the APM - BIOS by passing the "apm=off" option to the kernel at boot time. - - Note that the APM support is almost completely disabled for - machines with more than one CPU. - In order to use APM, you will need supporting software. For location and more information, read <file:Documentation/pm.txt> and the Battery Powered Linux mini-HOWTO, available from @@ -665,39 +659,12 @@ config APM manpage ("man 8 hdparm") for that), and it doesn't turn off VESA-compliant "green" monitors. - This driver does not support the TI 4000M TravelMate and the ACER - 486/DX4/75 because they don't have compliant BIOSes. Many "green" - desktop machines also don't have compliant BIOSes, and this driver - may cause those machines to panic during the boot phase. - Generally, if you don't have a battery in your machine, there isn't much point in using this driver and you should say N. If you get random kernel OOPSes or reboots that don't seem to be related to anything, try disabling/enabling this option (or disabling/enabling APM in your BIOS). - Some other things you should try when experiencing seemingly random, - "weird" problems: - - 1) make sure that you have enough swap space and that it is - enabled. - 2) pass the "no-hlt" option to the kernel - 3) switch on floating point emulation in the kernel and pass - the "no387" option to the kernel - 4) pass the "floppy=nodma" option to the kernel - 5) pass the "mem=4M" option to the kernel (thereby disabling - all but the first 4 MB of RAM) - 6) make sure that the CPU is not over clocked. - 7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/> - 8) disable the cache from your BIOS settings - 9) install a fan for the video card or exchange video RAM - 10) install a better fan for the CPU - 11) exchange RAM chips - 12) exchange the motherboard. - - To compile this driver as a module, choose M here: the - module will be called apm. - endmenu source "net/Kconfig" @@ -752,6 +719,8 @@ source "drivers/hwmon/Kconfig" source "drivers/misc/Kconfig" +source "drivers/mfd/Kconfig" + source "drivers/media/Kconfig" source "drivers/video/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 45a5709eaaa4..5d3acff8c596 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -53,7 +53,7 @@ config DEBUG_LL bool "Kernel low-level debugging functions" depends on DEBUG_KERNEL help - Say Y here to include definitions of printascii, printchar, printhex + Say Y here to include definitions of printascii, printch, printhex in the kernel. This is helpful if you are debugging code that executes before the console is initialized. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 67f1453ade05..130e6228b587 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -175,10 +175,10 @@ else endif @touch $@ -prepare: maketools include/asm-arm/.arch +archprepare: maketools include/asm-arm/.arch .PHONY: maketools FORCE -maketools: include/asm-arm/constants.h include/linux/version.h FORCE +maketools: include/linux/version.h FORCE $(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h # Convert bzImage to zImage @@ -190,7 +190,7 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -CLEAN_FILES += include/asm-arm/constants.h* include/asm-arm/mach-types.h \ +CLEAN_FILES += include/asm-arm/mach-types.h \ include/asm-arm/arch include/asm-arm/.arch # We use MRPROPER_FILES and CLEAN_FILES now @@ -201,11 +201,6 @@ archclean: bp:; $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage i zi:; $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \ - include/asm-arm/.arch - -include/asm-$(ARCH)/constants.h: arch/$(ARCH)/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) define archhelp echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)' diff --git a/arch/arm/boot/compressed/head-sharpsl.S b/arch/arm/boot/compressed/head-sharpsl.S index d6bf8a2b090d..59ad69640d6b 100644 --- a/arch/arm/boot/compressed/head-sharpsl.S +++ b/arch/arm/boot/compressed/head-sharpsl.S @@ -7,7 +7,8 @@ * so we have to figure out the machine for ourselves... * * Support for Poodle, Corgi (SL-C700), Shepherd (SL-C750) - * and Husky (SL-C760). + * Husky (SL-C760), Tosa (SL-C6000), Spitz (SL-C3000), + * Akita (SL-C1000) and Borzoi (SL-C3100). * */ @@ -23,6 +24,22 @@ __SharpSL_start: +/* Check for TC6393 - if found we have a Tosa */ + ldr r7, .TOSAID + mov r1, #0x10000000 @ Base address of TC6393 chip + mov r6, #0x03 + ldrh r3, [r1, #8] @ Load TC6393XB Revison: This is 0x0003 + cmp r6, r3 + beq .SHARPEND @ Success -> tosa + +/* Check for pxa270 - if found, branch */ + mrc p15, 0, r4, c0, c0 @ Get Processor ID + and r4, r4, #0xffffff00 + ldr r3, .PXA270ID + cmp r4, r3 + beq .PXA270 + +/* Check for w100 - if not found we have a Poodle */ ldr r1, .W100ADDR @ Base address of w100 chip + regs offset mov r6, #0x31 @ Load Magic Init value @@ -30,7 +47,7 @@ __SharpSL_start: mov r5, #0x3000 .W100LOOP: subs r5, r5, #1 - bne .W100LOOP + bne .W100LOOP mov r6, #0x30 @ Load 2nd Magic Init value str r6, [r1, #0x280] @ to SCRATCH_UMSK @@ -40,45 +57,52 @@ __SharpSL_start: cmp r6, r3 bne .SHARPEND @ We have no w100 - Poodle - mrc p15, 0, r6, c0, c0 @ Get Processor ID - and r6, r6, #0xffffff00 +/* Check for pxa250 - if found we have a Corgi */ ldr r7, .CORGIID ldr r3, .PXA255ID - cmp r6, r3 + cmp r4, r3 blo .SHARPEND @ We have a PXA250 - Corgi - mov r1, #0x0c000000 @ Base address of NAND chip - ldrb r3, [r1, #24] @ Load FLASHCTL - bic r3, r3, #0x11 @ SET NCE - orr r3, r3, #0x0a @ SET CLR + FLWP - strb r3, [r1, #24] @ Save to FLASHCTL - mov r2, #0x90 @ Command "readid" - strb r2, [r1, #20] @ Save to FLASHIO - bic r3, r3, #2 @ CLR CLE - orr r3, r3, #4 @ SET ALE - strb r3, [r1, #24] @ Save to FLASHCTL - mov r2, #0 @ Address 0x00 - strb r2, [r1, #20] @ Save to FLASHIO - bic r3, r3, #4 @ CLR ALE - strb r3, [r1, #24] @ Save to FLASHCTL -.SHARP1: - ldrb r3, [r1, #24] @ Load FLASHCTL - tst r3, #32 @ Is chip ready? - beq .SHARP1 - ldrb r2, [r1, #20] @ NAND Manufacturer ID - ldrb r3, [r1, #20] @ NAND Chip ID +/* Check for 64MiB flash - if found we have a Shepherd */ + bl get_flash_ids ldr r7, .SHEPHERDID cmp r3, #0x76 @ 64MiB flash beq .SHARPEND @ We have Shepherd + +/* Must be a Husky */ ldr r7, .HUSKYID @ Must be Husky b .SHARPEND +.PXA270: +/* Check for 16MiB flash - if found we have Spitz */ + bl get_flash_ids + ldr r7, .SPITZID + cmp r3, #0x73 @ 16MiB flash + beq .SHARPEND @ We have Spitz + +/* Check for a second SCOOP chip - if found we have Borzoi */ + ldr r1, .SCOOP2ADDR + ldr r7, .BORZOIID + mov r6, #0x0140 + strh r6, [r1] + ldrh r6, [r1] + cmp r6, #0x0140 + beq .SHARPEND @ We have Borzoi + +/* Must be Akita */ + ldr r7, .AKITAID + b .SHARPEND @ We have Borzoi + .PXA255ID: .word 0x69052d00 @ PXA255 Processor ID +.PXA270ID: + .word 0x69054100 @ PXA270 Processor ID .W100ID: .word 0x57411002 @ w100 Chip ID .W100ADDR: .word 0x08010000 @ w100 Chip ID Reg Address +.SCOOP2ADDR: + .word 0x08800040 .POODLEID: .word MACH_TYPE_POODLE .CORGIID: @@ -87,6 +111,41 @@ __SharpSL_start: .word MACH_TYPE_SHEPHERD .HUSKYID: .word MACH_TYPE_HUSKY -.SHARPEND: +.TOSAID: + .word MACH_TYPE_TOSA +.SPITZID: + .word MACH_TYPE_SPITZ +.AKITAID: + .word MACH_TYPE_AKITA +.BORZOIID: + .word MACH_TYPE_BORZOI +/* + * Return: r2 - NAND Manufacturer ID + * r3 - NAND Chip ID + * Corrupts: r1 + */ +get_flash_ids: + mov r1, #0x0c000000 @ Base address of NAND chip + ldrb r3, [r1, #24] @ Load FLASHCTL + bic r3, r3, #0x11 @ SET NCE + orr r3, r3, #0x0a @ SET CLR + FLWP + strb r3, [r1, #24] @ Save to FLASHCTL + mov r2, #0x90 @ Command "readid" + strb r2, [r1, #20] @ Save to FLASHIO + bic r3, r3, #2 @ CLR CLE + orr r3, r3, #4 @ SET ALE + strb r3, [r1, #24] @ Save to FLASHCTL + mov r2, #0 @ Address 0x00 + strb r2, [r1, #20] @ Save to FLASHIO + bic r3, r3, #4 @ CLR ALE + strb r3, [r1, #24] @ Save to FLASHCTL +.fids1: + ldrb r3, [r1, #24] @ Load FLASHCTL + tst r3, #32 @ Is chip ready? + beq .fids1 + ldrb r2, [r1, #20] @ NAND Manufacturer ID + ldrb r3, [r1, #20] @ NAND Chip ID + mov pc, lr +.SHARPEND: diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 692af6b5e8ff..666ba393575b 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -1,6 +1,9 @@ config ICST525 bool +config ARM_GIC + bool + config ICST307 bool diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 11f20a43ee3a..a87886564b19 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -4,6 +4,7 @@ obj-y += rtctime.o obj-$(CONFIG_ARM_AMBA) += amba.o +obj-$(CONFIG_ARM_GIC) += gic.o obj-$(CONFIG_ICST525) += icst525.o obj-$(CONFIG_ICST307) += icst307.o obj-$(CONFIG_SA1111) += sa1111.o diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c new file mode 100644 index 000000000000..d74990717559 --- /dev/null +++ b/arch/arm/common/gic.c @@ -0,0 +1,167 @@ +/* + * linux/arch/arm/common/gic.c + * + * Copyright (C) 2002 ARM Limited, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Interrupt architecture for the GIC: + * + * o There is one Interrupt Distributor, which receives interrupts + * from system devices and sends them to the Interrupt Controllers. + * + * o There is one CPU Interface per CPU, which sends interrupts sent + * by the Distributor, and interrupts generated locally, to the + * associated CPU. + * + * Note that IRQs 0-31 are special - they are local to each CPU. + * As such, the enable set/clear, pending set/clear and active bit + * registers are banked per-cpu for these sources. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/smp.h> +#include <linux/cpumask.h> + +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/mach/irq.h> +#include <asm/hardware/gic.h> + +static void __iomem *gic_dist_base; +static void __iomem *gic_cpu_base; + +/* + * Routines to acknowledge, disable and enable interrupts + * + * Linux assumes that when we're done with an interrupt we need to + * unmask it, in the same way we need to unmask an interrupt when + * we first enable it. + * + * The GIC has a seperate notion of "end of interrupt" to re-enable + * an interrupt after handling, in order to support hardware + * prioritisation. + * + * We can make the GIC behave in the way that Linux expects by making + * our "acknowledge" routine disable the interrupt, then mark it as + * complete. + */ +static void gic_ack_irq(unsigned int irq) +{ + u32 mask = 1 << (irq % 32); + writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4); + writel(irq, gic_cpu_base + GIC_CPU_EOI); +} + +static void gic_mask_irq(unsigned int irq) +{ + u32 mask = 1 << (irq % 32); + writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4); +} + +static void gic_unmask_irq(unsigned int irq) +{ + u32 mask = 1 << (irq % 32); + writel(mask, gic_dist_base + GIC_DIST_ENABLE_SET + (irq / 32) * 4); +} + +static void gic_set_cpu(struct irqdesc *desc, unsigned int irq, unsigned int cpu) +{ + void __iomem *reg = gic_dist_base + GIC_DIST_TARGET + (irq & ~3); + unsigned int shift = (irq % 4) * 8; + u32 val; + + val = readl(reg) & ~(0xff << shift); + val |= 1 << (cpu + shift); + writel(val, reg); +} + +static struct irqchip gic_chip = { + .ack = gic_ack_irq, + .mask = gic_mask_irq, + .unmask = gic_unmask_irq, +#ifdef CONFIG_SMP + .set_cpu = gic_set_cpu, +#endif +}; + +void __init gic_dist_init(void __iomem *base) +{ + unsigned int max_irq, i; + u32 cpumask = 1 << smp_processor_id(); + + cpumask |= cpumask << 8; + cpumask |= cpumask << 16; + + gic_dist_base = base; + + writel(0, base + GIC_DIST_CTRL); + + /* + * Find out how many interrupts are supported. + */ + max_irq = readl(base + GIC_DIST_CTR) & 0x1f; + max_irq = (max_irq + 1) * 32; + + /* + * The GIC only supports up to 1020 interrupt sources. + * Limit this to either the architected maximum, or the + * platform maximum. + */ + if (max_irq > max(1020, NR_IRQS)) + max_irq = max(1020, NR_IRQS); + + /* + * Set all global interrupts to be level triggered, active low. + */ + for (i = 32; i < max_irq; i += 16) + writel(0, base + GIC_DIST_CONFIG + i * 4 / 16); + + /* + * Set all global interrupts to this CPU only. + */ + for (i = 32; i < max_irq; i += 4) + writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4); + + /* + * Set priority on all interrupts. + */ + for (i = 0; i < max_irq; i += 4) + writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4); + + /* + * Disable all interrupts. + */ + for (i = 0; i < max_irq; i += 32) + writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32); + + /* + * Setup the Linux IRQ subsystem. + */ + for (i = 29; i < max_irq; i++) { + set_irq_chip(i, &gic_chip); + set_irq_handler(i, do_level_IRQ); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + } + + writel(1, base + GIC_DIST_CTRL); +} + +void __cpuinit gic_cpu_init(void __iomem *base) +{ + gic_cpu_base = base; + writel(0xf0, base + GIC_CPU_PRIMASK); + writel(1, base + GIC_CPU_CTRL); +} + +#ifdef CONFIG_SMP +void gic_raise_softirq(cpumask_t cpumask, unsigned int irq) +{ + unsigned long map = *cpus_addr(cpumask); + + writel(map << 16 | irq, gic_dist_base + GIC_DIST_SOFTINT); +} +#endif diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 41f12658c8b4..2786f7c34b3f 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -177,7 +177,7 @@ static void locomo_handler(unsigned int irq, struct irqdesc *desc, d = irq_desc + irq; for (i = 0; i <= 3; i++, d++, irq++) { if (req & (0x0100 << i)) { - d->handle(irq, d, regs); + desc_handle_irq(irq, d, regs); } } @@ -220,7 +220,7 @@ static void locomo_key_handler(unsigned int irq, struct irqdesc *desc, if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) { d = irq_desc + LOCOMO_IRQ_KEY_START; - d->handle(LOCOMO_IRQ_KEY_START, d, regs); + desc_handle_irq(LOCOMO_IRQ_KEY_START, d, regs); } } @@ -273,7 +273,7 @@ static void locomo_gpio_handler(unsigned int irq, struct irqdesc *desc, d = irq_desc + LOCOMO_IRQ_GPIO_START; for (i = 0; i <= 15; i++, irq++, d++) { if (req & (0x0001 << i)) { - d->handle(irq, d, regs); + desc_handle_irq(irq, d, regs); } } } @@ -328,7 +328,7 @@ static void locomo_lt_handler(unsigned int irq, struct irqdesc *desc, if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) { d = irq_desc + LOCOMO_IRQ_LT_START; - d->handle(LOCOMO_IRQ_LT_START, d, regs); + desc_handle_irq(LOCOMO_IRQ_LT_START, d, regs); } } @@ -379,7 +379,7 @@ static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc, for (i = 0; i <= 3; i++, irq++, d++) { if (req & (0x0001 << i)) { - d->handle(irq, d, regs); + desc_handle_irq(irq, d, regs); } } } @@ -541,6 +541,103 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info) return ret; } +#ifdef CONFIG_PM + +struct locomo_save_data { + u16 LCM_GPO; + u16 LCM_SPICT; + u16 LCM_GPE; + u16 LCM_ASD; + u16 LCM_SPIMD; +}; + +static int locomo_suspend(struct device *dev, u32 pm_message_t, u32 level) +{ + struct locomo *lchip = dev_get_drvdata(dev); + struct locomo_save_data *save; + unsigned long flags; + + if (level != SUSPEND_DISABLE) + return 0; + + save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL); + if (!save) + return -ENOMEM; + + dev->power.saved_state = (void *) save; + + spin_lock_irqsave(&lchip->lock, flags); + + save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */ + locomo_writel(0x00, lchip->base + LOCOMO_GPO); + save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPICT); /* SPI */ + locomo_writel(0x40, lchip->base + LOCOMO_SPICT); + save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */ + locomo_writel(0x00, lchip->base + LOCOMO_GPE); + save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */ + locomo_writel(0x00, lchip->base + LOCOMO_ASD); + save->LCM_SPIMD = locomo_readl(lchip->base + LOCOMO_SPIMD); /* SPI */ + locomo_writel(0x3C14, lchip->base + LOCOMO_SPIMD); + + locomo_writel(0x00, lchip->base + LOCOMO_PAIF); + locomo_writel(0x00, lchip->base + LOCOMO_DAC); + locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC); + + if ( (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88) ) + locomo_writel(0x00, lchip->base + LOCOMO_C32K); /* CLK32 off */ + else + /* 18MHz already enabled, so no wait */ + locomo_writel(0xc1, lchip->base + LOCOMO_C32K); /* CLK32 on */ + + locomo_writel(0x00, lchip->base + LOCOMO_TADC); /* 18MHz clock off*/ + locomo_writel(0x00, lchip->base + LOCOMO_AUDIO + LOCOMO_ACC); /* 22MHz/24MHz clock off */ + locomo_writel(0x00, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); /* FL */ + + spin_unlock_irqrestore(&lchip->lock, flags); + + return 0; +} + +static int locomo_resume(struct device *dev, u32 level) +{ + struct locomo *lchip = dev_get_drvdata(dev); + struct locomo_save_data *save; + unsigned long r; + unsigned long flags; + + if (level != RESUME_ENABLE) + return 0; + + save = (struct locomo_save_data *) dev->power.saved_state; + if (!save) + return 0; + + spin_lock_irqsave(&lchip->lock, flags); + + locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO); + locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPICT); + locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE); + locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD); + locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPIMD); + + locomo_writel(0x00, lchip->base + LOCOMO_C32K); + locomo_writel(0x90, lchip->base + LOCOMO_TADC); + + locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KSC); + r = locomo_readl(lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC); + r &= 0xFEFF; + locomo_writel(r, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC); + locomo_writel(0x1, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KCMD); + + spin_unlock_irqrestore(&lchip->lock, flags); + + dev->power.saved_state = NULL; + kfree(save); + + return 0; +} +#endif + /** * locomo_probe - probe for a single LoCoMo chip. * @phys_addr: physical address of device. @@ -651,15 +748,15 @@ __locomo_probe(struct device *me, struct resource *mem, int irq) return ret; } -static void __locomo_remove(struct locomo *lchip) +static int locomo_remove_child(struct device *dev, void *data) { - struct list_head *l, *n; - - list_for_each_safe(l, n, &lchip->dev->children) { - struct device *d = list_to_dev(l); + device_unregister(dev); + return 0; +} - device_unregister(d); - } +static void __locomo_remove(struct locomo *lchip) +{ + device_for_each_child(lchip->dev, NULL, locomo_remove_child); if (lchip->irq != NO_IRQ) { set_irq_chained_handler(lchip->irq, NULL); @@ -707,6 +804,10 @@ static struct device_driver locomo_device_driver = { .bus = &platform_bus_type, .probe = locomo_probe, .remove = locomo_remove, +#ifdef CONFIG_PM + .suspend = locomo_suspend, + .resume = locomo_resume, +#endif }; /* diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 38c2eb667eb9..1a47fbf9cbbc 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -268,8 +268,8 @@ static struct irqchip sa1111_low_chip = { .mask = sa1111_mask_lowirq, .unmask = sa1111_unmask_lowirq, .retrigger = sa1111_retrigger_lowirq, - .type = sa1111_type_lowirq, - .wake = sa1111_wake_lowirq, + .set_type = sa1111_type_lowirq, + .set_wake = sa1111_wake_lowirq, }; static void sa1111_mask_highirq(unsigned int irq) @@ -364,8 +364,8 @@ static struct irqchip sa1111_high_chip = { .mask = sa1111_mask_highirq, .unmask = sa1111_unmask_highirq, .retrigger = sa1111_retrigger_highirq, - .type = sa1111_type_highirq, - .wake = sa1111_wake_highirq, + .set_type = sa1111_type_highirq, + .set_wake = sa1111_wake_highirq, }; static void sa1111_setup_irq(struct sa1111 *sachip) diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index cfd0d3e550d9..d3a04c2a2c85 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -17,6 +17,12 @@ #define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr))) +/* PCMCIA to Scoop linkage structures for pxa2xx_sharpsl.c + There is no easy way to link multiple scoop devices into one + single entity for the pxa2xx_pcmcia device */ +int scoop_num; +struct scoop_pcmcia_dev *scoop_devs; + struct scoop_dev { void *base; spinlock_t scoop_lock; @@ -85,7 +91,7 @@ EXPORT_SYMBOL(read_scoop_reg); EXPORT_SYMBOL(write_scoop_reg); #ifdef CONFIG_PM -static int scoop_suspend(struct device *dev, uint32_t state, uint32_t level) +static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level) { if (level == SUSPEND_POWER_DOWN) { struct scoop_dev *sdev = dev_get_drvdata(dev); diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index 24955263b096..4198677cd394 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Fri Jul 8 04:49:34 2005 +# Linux kernel version: 2.6.13 +# Mon Sep 5 18:07:12 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -102,9 +102,11 @@ CONFIG_OMAP_MUX_WARNINGS=y # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 +# CONFIG_OMAP_DM_TIMER is not set CONFIG_OMAP_LL_DEBUG_UART1=y # CONFIG_OMAP_LL_DEBUG_UART2 is not set # CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y # # OMAP Core Type @@ -166,7 +168,6 @@ CONFIG_ISA_DMA_API=y # # Kernel Features # -# CONFIG_SMP is not set CONFIG_PREEMPT=y CONFIG_NO_IDLE_HZ=y # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -230,91 +231,82 @@ CONFIG_PM=y # CONFIG_APM is not set # -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) +# Networking # -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=3 -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set +CONFIG_NET=y # -# User Modules And Translation Layers +# Networking options # -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set # -# RAM/ROM/Flash chip drivers +# SCTP Configuration (EXPERIMENTAL) # -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set # -# Mapping drivers for chip access +# Network testing # -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set # -# Self-contained MTD device drivers +# Device Drivers # -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set # -# Disk-On-Chip Device Drivers +# Generic Driver Options # -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # -# NAND Flash Device Drivers +# Memory Technology Devices (MTD) # -# CONFIG_MTD_NAND is not set +# CONFIG_MTD is not set # # Parallel port support @@ -403,72 +395,8 @@ CONFIG_SCSI_PROC_FS=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) +# Network device support # -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -518,6 +446,8 @@ CONFIG_SLIP_COMPRESSED=y # CONFIG_SLIP_MODE_SLIP6 is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -615,77 +545,15 @@ CONFIG_WATCHDOG_NOWAYOUT=y # # I2C support # -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ISA is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C is not set +# CONFIG_I2C_SENSOR is not set +CONFIG_ISP1301_OMAP=y # -# Hardware Sensors Chip support +# Hardware Monitoring support # -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -CONFIG_ISP1301_OMAP=y -CONFIG_TPS65010=y -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_HWMON=y +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -756,15 +624,9 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_FUSION is not set -# CONFIG_SOUND_CS4281 is not set -# CONFIG_SOUND_SONICVIBES is not set -# CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_OSS is not set -# CONFIG_SOUND_TVMIXER is not set # CONFIG_SOUND_AD1980 is not set # @@ -810,6 +672,7 @@ CONFIG_EXT2_FS=y # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # # XFS support @@ -817,6 +680,7 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -857,15 +721,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=2 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -1007,4 +862,3 @@ CONFIG_CRYPTO_DES=y CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 96a794d8de84..756348bf5170 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-git4 -# Wed Jun 22 15:56:42 2005 +# Linux kernel version: 2.6.13-git8 +# Thu Sep 8 19:24:02 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -22,6 +22,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -31,6 +32,7 @@ CONFIG_SYSCTL=y # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -88,7 +90,9 @@ CONFIG_ARCH_S3C2410=y # # S3C24XX Implementations # +CONFIG_MACH_ANUBIS=y CONFIG_ARCH_BAST=y +CONFIG_BAST_PC104_IRQ=y CONFIG_ARCH_H1940=y CONFIG_MACH_N30=y CONFIG_ARCH_SMDK2410=y @@ -112,6 +116,7 @@ CONFIG_S3C2410_DMA=y # CONFIG_S3C2410_DMA_DEBUG is not set # CONFIG_S3C2410_PM_DEBUG is not set # CONFIG_S3C2410_PM_CHECK is not set +CONFIG_PM_SIMTEC=y CONFIG_S3C2410_LOWLEVEL_UART_PORT=0 # @@ -149,7 +154,15 @@ CONFIG_ISA_DMA_API=y # # CONFIG_SMP is not set # CONFIG_PREEMPT is not set -# CONFIG_DISCONTIGMEM is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_ALIGNMENT_TRAP=y # @@ -186,6 +199,74 @@ CONFIG_PM=y CONFIG_APM=y # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -258,6 +339,7 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_IMPA7 is not set CONFIG_MTD_BAST=y CONFIG_MTD_BAST_MAXSIZE=4 +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -312,7 +394,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -354,6 +435,7 @@ CONFIG_BLK_DEV_IDE_BAST=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -376,70 +458,8 @@ CONFIG_BLK_DEV_IDE_BAST=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options +# Network device support # -# CONFIG_PACKET is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -447,6 +467,11 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y @@ -480,6 +505,8 @@ CONFIG_DM9000=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -562,7 +589,6 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -605,7 +631,6 @@ CONFIG_S3C2410_RTC=y # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # @@ -628,7 +653,7 @@ CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # -# CONFIG_I2C_ISA is not set +CONFIG_I2C_ISA=m # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set CONFIG_I2C_S3C2410=y @@ -636,14 +661,33 @@ CONFIG_I2C_S3C2410=y # CONFIG_I2C_PCA_ISA is not set # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -CONFIG_I2C_SENSOR=m +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=m +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +CONFIG_HWMON_VID=m # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set @@ -662,27 +706,21 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # -# Other I2C Chip support +# Misc devices # -# CONFIG_SENSORS_DS1337 is not set -CONFIG_SENSORS_EEPROM=m -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # -# Misc devices +# Multimedia Capabilities Port drivers # # @@ -731,7 +769,7 @@ CONFIG_DUMMY_CONSOLE=y # USB support # CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # @@ -749,6 +787,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -758,6 +797,7 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # # XFS support @@ -765,6 +805,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -791,11 +832,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -812,8 +853,7 @@ CONFIG_JFFS_FS_VERBOSE=0 # CONFIG_JFFS_PROC_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -835,6 +875,7 @@ CONFIG_NFS_FS=y # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -920,6 +961,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_DEBUG_KERNEL=y # CONFIG_MAGIC_SYSRQ is not set CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 2b6b4c786e65..949ec4427f21 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -10,7 +10,7 @@ * This file is included twice in entry-common.S */ #ifndef NR_syscalls -#define NR_syscalls 320 +#define NR_syscalls 328 #else __syscall_start: @@ -284,7 +284,7 @@ __syscall_start: .long sys_fstatfs64 .long sys_tgkill .long sys_utimes -/* 270 */ .long sys_fadvise64_64 +/* 270 */ .long sys_arm_fadvise64_64_wrapper .long sys_pciconfig_iobase .long sys_pciconfig_read .long sys_pciconfig_write @@ -333,6 +333,9 @@ __syscall_start: .long sys_inotify_init .long sys_inotify_add_watch .long sys_inotify_rm_watch + .long sys_mbind_wrapper +/* 320 */ .long sys_get_mempolicy + .long sys_set_mempolicy __syscall_end: .rept NR_syscalls - (__syscall_end - __syscall_start) / 4 diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index 6540db691338..dceb826bd216 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -585,7 +585,7 @@ ecard_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) if (pending) { struct irqdesc *d = irq_desc + ec->irq; - d->handle(ec->irq, d, regs); + desc_handle_irq(ec->irq, d, regs); called ++; } } @@ -632,7 +632,7 @@ ecard_irqexp_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *reg * Serial cards should go in 0/1, ethernet/scsi in 2/3 * otherwise you will lose serial data at high speeds! */ - d->handle(ec->irq, d, regs); + desc_handle_irq(ec->irq, d, regs); } else { printk(KERN_WARNING "card%d: interrupt from unclaimed " "card???\n", slot); diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 3f8d0e3aefab..db302c6e5343 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -265,6 +265,14 @@ sys_futex_wrapper: str r5, [sp, #4] @ push sixth arg b sys_futex +sys_arm_fadvise64_64_wrapper: + str r5, [sp, #4] @ push r5 to stack + b sys_arm_fadvise64_64 + +sys_mbind_wrapper: + str r5, [sp, #4] + b sys_mbind + /* * Note: off_4k (r5) is always units of 4K. If we can't do the requested * offset, we return EINVAL. diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index afef21273963..648cfff93138 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -3,7 +3,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/errno.h> #include <asm/thread_info.h> diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 1155cf07c871..539626351348 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -20,7 +20,7 @@ #include <asm/mach-types.h> #include <asm/procinfo.h> #include <asm/ptrace.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/thread_info.h> #include <asm/system.h> diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 395137a8fad2..3284118f356b 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -207,8 +207,8 @@ void enable_irq_wake(unsigned int irq) unsigned long flags; spin_lock_irqsave(&irq_controller_lock, flags); - if (desc->chip->wake) - desc->chip->wake(irq, 1); + if (desc->chip->set_wake) + desc->chip->set_wake(irq, 1); spin_unlock_irqrestore(&irq_controller_lock, flags); } EXPORT_SYMBOL(enable_irq_wake); @@ -219,8 +219,8 @@ void disable_irq_wake(unsigned int irq) unsigned long flags; spin_lock_irqsave(&irq_controller_lock, flags); - if (desc->chip->wake) - desc->chip->wake(irq, 0); + if (desc->chip->set_wake) + desc->chip->set_wake(irq, 0); spin_unlock_irqrestore(&irq_controller_lock, flags); } EXPORT_SYMBOL(disable_irq_wake); @@ -517,7 +517,7 @@ static void do_pending_irqs(struct pt_regs *regs) list_for_each_safe(l, n, &head) { desc = list_entry(l, struct irqdesc, pend); list_del_init(&desc->pend); - desc->handle(desc - irq_desc, desc, regs); + desc_handle_irq(desc - irq_desc, desc, regs); } /* @@ -545,7 +545,7 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) irq_enter(); spin_lock(&irq_controller_lock); - desc->handle(irq, desc, regs); + desc_handle_irq(irq, desc, regs); /* * Now re-run any pending interrupts. @@ -624,9 +624,9 @@ int set_irq_type(unsigned int irq, unsigned int type) } desc = irq_desc + irq; - if (desc->chip->type) { + if (desc->chip->set_type) { spin_lock_irqsave(&irq_controller_lock, flags); - ret = desc->chip->type(irq, type); + ret = desc->chip->set_type(irq, type); spin_unlock_irqrestore(&irq_controller_lock, flags); } @@ -846,8 +846,8 @@ unsigned long probe_irq_on(void) irq_desc[i].probing = 1; irq_desc[i].triggered = 0; - if (irq_desc[i].chip->type) - irq_desc[i].chip->type(i, IRQT_PROBE); + if (irq_desc[i].chip->set_type) + irq_desc[i].chip->set_type(i, IRQT_PROBE); irq_desc[i].chip->unmask(i); irqs += 1; } diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S index 8f74e24536ba..24c7b0477a09 100644 --- a/arch/arm/kernel/iwmmxt.S +++ b/arch/arm/kernel/iwmmxt.S @@ -17,7 +17,7 @@ #include <linux/linkage.h> #include <asm/ptrace.h> #include <asm/thread_info.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #define MMX_WR0 (0x00) #define MMX_WR1 (0x08) diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 5e435e42dacd..a94d75fef598 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -658,11 +658,12 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, /* * Block the signal if we were unsuccessful. */ - if (ret != 0 || !(ka->sa.sa_flags & SA_NODEFER)) { + if (ret != 0) { spin_lock_irq(&tsk->sighand->siglock); sigorsets(&tsk->blocked, &tsk->blocked, &ka->sa.sa_mask); - sigaddset(&tsk->blocked, sig); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(&tsk->blocked, sig); recalc_sigpending(); spin_unlock_irq(&tsk->sighand->siglock); } diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index b2085735a2ba..826164945747 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -110,7 +110,7 @@ int __cpuinit __cpu_up(unsigned int cpu) * We need to tell the secondary core where to find * its stack and the page tables. */ - secondary_data.stack = (void *)idle->thread_info + THREAD_SIZE - 8; + secondary_data.stack = (void *)idle->thread_info + THREAD_START_SP; secondary_data.pgdir = virt_to_phys(pgd); wmb(); diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index f897ce2ccf0d..42629ff84f5a 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -311,3 +311,13 @@ long execve(const char *filename, char **argv, char **envp) return ret; } EXPORT_SYMBOL(execve); + +/* + * Since loff_t is a 64 bit type we avoid a lot of ABI hastle + * with a different argument ordering. + */ +asmlinkage long sys_arm_fadvise64_64(int fd, int advice, + loff_t offset, loff_t len) +{ + return sys_fadvise64_64(fd, offset, len, advice); +} diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 1b7fcd50c3e2..69449a818dcc 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -102,7 +102,7 @@ static unsigned long next_rtc_update; */ static inline void do_set_rtc(void) { - if (time_status & STA_UNSYNC || set_rtc == NULL) + if (!ntp_synced() || set_rtc == NULL) return; if (next_rtc_update && @@ -292,10 +292,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; @@ -433,10 +430,12 @@ void timer_dyn_reprogram(void) { struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; - write_seqlock(&xtime_lock); - if (dyn_tick->state & DYN_TICK_ENABLED) - dyn_tick->reprogram(next_timer_interrupt() - jiffies); - write_sequnlock(&xtime_lock); + if (dyn_tick) { + write_seqlock(&xtime_lock); + if (dyn_tick->state & DYN_TICK_ENABLED) + dyn_tick->reprogram(next_timer_interrupt() - jiffies); + write_sequnlock(&xtime_lock); + } } static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf) diff --git a/arch/arm/lib/copy_page.S b/arch/arm/lib/copy_page.S index 4c38abdbe497..68117968482b 100644 --- a/arch/arm/lib/copy_page.S +++ b/arch/arm/lib/copy_page.S @@ -11,7 +11,7 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #define COPY_COUNT (PAGE_SZ/64 PLD( -1 )) diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S index 46a2dc962e9d..333bca292de9 100644 --- a/arch/arm/lib/csumpartialcopyuser.S +++ b/arch/arm/lib/csumpartialcopyuser.S @@ -13,7 +13,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/errno.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> .text diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 64aa6f4fe5e4..d204018070a4 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -26,7 +26,7 @@ * Note that ADDR_LIMIT is either 0 or 0xc0000000. * Note also that it is intended that __get_user_bad is not global. */ -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/thread_info.h> #include <asm/errno.h> diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index b09398d95aac..4593e9c07f05 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -26,7 +26,7 @@ * Note that ADDR_LIMIT is either 0 or 0xc0000000 * Note also that it is intended that __put_user_bad is not global. */ -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/thread_info.h> #include <asm/errno.h> diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c index 112f1d68fb2b..e216ab8b9e8f 100644 --- a/arch/arm/mach-clps7500/core.c +++ b/arch/arm/mach-clps7500/core.c @@ -354,7 +354,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 23c4da10101b..5aeadfd72143 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -219,7 +219,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/arch/arm/mach-epxa10db/arch.c b/arch/arm/mach-epxa10db/arch.c index 7daa021676d0..44c56571d183 100644 --- a/arch/arm/mach-epxa10db/arch.c +++ b/arch/arm/mach-epxa10db/arch.c @@ -52,7 +52,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index 324d9edeec38..bdd257921cfb 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -87,6 +87,7 @@ config FOOTBRIDGE_ADDIN # EBSA285 board in either host or addin mode config ARCH_EBSA285 + select ARCH_MAY_HAVE_PC_FDC bool endif diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c index b21016070ea3..e1c43b331d64 100644 --- a/arch/arm/mach-footbridge/isa-irq.c +++ b/arch/arm/mach-footbridge/isa-irq.c @@ -95,7 +95,7 @@ isa_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) } desc = irq_desc + isa_irq; - desc->handle(isa_irq, desc, regs); + desc_handle_irq(isa_irq, desc, regs); } static struct irqaction irq_cascade = { .handler = no_action, .name = "cascade", }; diff --git a/arch/arm/mach-footbridge/isa.c b/arch/arm/mach-footbridge/isa.c index aa3a1fef563e..28846c7edaaf 100644 --- a/arch/arm/mach-footbridge/isa.c +++ b/arch/arm/mach-footbridge/isa.c @@ -34,7 +34,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c index 96aa3af70d86..5110e2e65ddd 100644 --- a/arch/arm/mach-h720x/common.c +++ b/arch/arm/mach-h720x/common.c @@ -108,7 +108,7 @@ h720x_gpio_handler(unsigned int mask, unsigned int irq, while (mask) { if (mask & 1) { IRQDBG("handling irq %d\n", irq); - desc->handle(irq, desc, regs); + desc_handle_irq(irq, desc, regs); } irq++; desc++; diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c index 593b6a2a30e1..a4a7c0125d03 100644 --- a/arch/arm/mach-h720x/cpu-h7202.c +++ b/arch/arm/mach-h720x/cpu-h7202.c @@ -90,7 +90,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, @@ -126,7 +126,7 @@ h7202_timerx_demux_handler(unsigned int irq_unused, struct irqdesc *desc, desc = irq_desc + irq; while (mask) { if (mask & 1) - desc->handle(irq, desc, regs); + desc_handle_irq(irq, desc, regs); irq++; desc++; mask >>= 1; diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c index 0c2713426dfd..eeb8a6d4a399 100644 --- a/arch/arm/mach-imx/irq.c +++ b/arch/arm/mach-imx/irq.c @@ -152,7 +152,7 @@ imx_gpio_handler(unsigned int mask, unsigned int irq, while (mask) { if (mask & 1) { DEBUG_IRQ("handling irq %d\n", irq); - desc->handle(irq, desc, regs); + desc_handle_irq(irq, desc, regs); } irq++; desc++; @@ -214,7 +214,7 @@ static struct irqchip imx_gpio_chip = { .ack = imx_gpio_ack_irq, .mask = imx_gpio_mask_irq, .unmask = imx_gpio_unmask_irq, - .type = imx_gpio_irq_type, + .set_type = imx_gpio_irq_type, }; void __init diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 569f328c479d..2be5c03ab87f 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -170,7 +170,7 @@ sic_handle_irq(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) irq += IRQ_SIC_START; desc = irq_desc + irq; - desc->handle(irq, desc, regs); + desc_handle_irq(irq, desc, regs); } while (status); } diff --git a/arch/arm/mach-iop3xx/iop321-time.c b/arch/arm/mach-iop3xx/iop321-time.c index d53af1669502..0039793b694a 100644 --- a/arch/arm/mach-iop3xx/iop321-time.c +++ b/arch/arm/mach-iop3xx/iop321-time.c @@ -60,7 +60,7 @@ static unsigned long iop321_gettimeoffset(void) /* * Now convert them to usec. */ - usec = (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH; + usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000)); return usec; } diff --git a/arch/arm/mach-iop3xx/iop331-time.c b/arch/arm/mach-iop3xx/iop331-time.c index 1a6d9d661e4b..8eddfac7e2b0 100644 --- a/arch/arm/mach-iop3xx/iop331-time.c +++ b/arch/arm/mach-iop3xx/iop331-time.c @@ -58,7 +58,7 @@ static unsigned long iop331_gettimeoffset(void) /* * Now convert them to usec. */ - usec = (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH; + usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000)); return usec; } diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 45b18658499f..74bd2fd602d4 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -174,7 +174,7 @@ static struct resource ixp2000_uart_resource = { static struct platform_device ixp2000_serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = ixp2000_serial_port, }, @@ -317,7 +317,7 @@ static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irqdesc *desc, str for (i = 0; i <= 7; i++) { if (status & (1<<i)) { desc = irq_desc + i + IRQ_IXP2000_GPIO0; - desc->handle(i + IRQ_IXP2000_GPIO0, desc, regs); + desc_handle_irq(i + IRQ_IXP2000_GPIO0, desc, regs); } } } @@ -380,10 +380,10 @@ static void ixp2000_GPIO_irq_unmask(unsigned int irq) } static struct irqchip ixp2000_GPIO_irq_chip = { - .type = ixp2000_GPIO_irq_type, - .ack = ixp2000_GPIO_irq_mask_ack, - .mask = ixp2000_GPIO_irq_mask, - .unmask = ixp2000_GPIO_irq_unmask + .ack = ixp2000_GPIO_irq_mask_ack, + .mask = ixp2000_GPIO_irq_mask, + .unmask = ixp2000_GPIO_irq_unmask, + .set_type = ixp2000_GPIO_irq_type, }; static void ixp2000_pci_irq_mask(unsigned int irq) diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index a43369ad876c..63ba0191aa65 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -133,7 +133,7 @@ static void ixdp2x00_irq_handler(unsigned int irq, struct irqdesc *desc, struct struct irqdesc *cpld_desc; int cpld_irq = IXP2000_BOARD_IRQ(0) + i; cpld_desc = irq_desc + cpld_irq; - cpld_desc->handle(cpld_irq, cpld_desc, regs); + desc_handle_irq(cpld_irq, cpld_desc, regs); } } diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 43447dad1657..7a5109921287 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -82,7 +82,7 @@ static void ixdp2x01_irq_handler(unsigned int irq, struct irqdesc *desc, struct struct irqdesc *cpld_desc; int cpld_irq = IXP2000_BOARD_IRQ(0) + i; cpld_desc = irq_desc + cpld_irq; - cpld_desc->handle(cpld_irq, cpld_desc, regs); + desc_handle_irq(cpld_irq, cpld_desc, regs); } } diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 04490a9f8f6e..52ad11328e96 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -38,90 +38,6 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> -enum ixp4xx_irq_type { - IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE -}; -static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type); - -/************************************************************************* - * GPIO acces functions - *************************************************************************/ - -/* - * Configure GPIO line for input, interrupt, or output operation - * - * TODO: Enable/disable the irq_desc based on interrupt or output mode. - * TODO: Should these be named ixp4xx_gpio_? - */ -void gpio_line_config(u8 line, u32 style) -{ - static const int gpio2irq[] = { - 6, 7, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29 - }; - u32 enable; - volatile u32 *int_reg; - u32 int_style; - enum ixp4xx_irq_type irq_type; - - enable = *IXP4XX_GPIO_GPOER; - - if (style & IXP4XX_GPIO_OUT) { - enable &= ~((1) << line); - } else if (style & IXP4XX_GPIO_IN) { - enable |= ((1) << line); - - switch (style & IXP4XX_GPIO_INTSTYLE_MASK) - { - case (IXP4XX_GPIO_ACTIVE_HIGH): - int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; - irq_type = IXP4XX_IRQ_LEVEL; - break; - case (IXP4XX_GPIO_ACTIVE_LOW): - int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; - irq_type = IXP4XX_IRQ_LEVEL; - break; - case (IXP4XX_GPIO_RISING_EDGE): - int_style = IXP4XX_GPIO_STYLE_RISING_EDGE; - irq_type = IXP4XX_IRQ_EDGE; - break; - case (IXP4XX_GPIO_FALLING_EDGE): - int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE; - irq_type = IXP4XX_IRQ_EDGE; - break; - case (IXP4XX_GPIO_TRANSITIONAL): - int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL; - irq_type = IXP4XX_IRQ_EDGE; - break; - default: - int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; - irq_type = IXP4XX_IRQ_LEVEL; - break; - } - - if (style & IXP4XX_GPIO_INTSTYLE_MASK) - ixp4xx_config_irq(gpio2irq[line], irq_type); - - if (line >= 8) { /* pins 8-15 */ - line -= 8; - int_reg = IXP4XX_GPIO_GPIT2R; - } - else { /* pins 0-7 */ - int_reg = IXP4XX_GPIO_GPIT1R; - } - - /* Clear the style for the appropriate pin */ - *int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR << - (line * IXP4XX_GPIO_STYLE_SIZE)); - - /* Set the new style */ - *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); - } - - *IXP4XX_GPIO_GPOER = enable; -} - -EXPORT_SYMBOL(gpio_line_config); - /************************************************************************* * IXP4xx chipset I/O mapping *************************************************************************/ @@ -165,6 +81,69 @@ void __init ixp4xx_map_io(void) * (be it PCI or something else) configures that GPIO line * as an IRQ. **************************************************************************/ +enum ixp4xx_irq_type { + IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE +}; + +static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type); + +/* + * IRQ -> GPIO mapping table + */ +static int irq2gpio[32] = { + -1, -1, -1, -1, -1, -1, 0, 1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, 2, 3, 4, 5, 6, + 7, 8, 9, 10, 11, 12, -1, -1, +}; + +static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) +{ + int line = irq2gpio[irq]; + u32 int_style; + enum ixp4xx_irq_type irq_type; + volatile u32 *int_reg; + + /* + * Only for GPIO IRQs + */ + if (line < 0) + return -EINVAL; + + if (type & IRQT_BOTHEDGE) { + int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL; + irq_type = IXP4XX_IRQ_EDGE; + } else if (type & IRQT_RISING) { + int_style = IXP4XX_GPIO_STYLE_RISING_EDGE; + irq_type = IXP4XX_IRQ_EDGE; + } else if (type & IRQT_FALLING) { + int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE; + irq_type = IXP4XX_IRQ_EDGE; + } else if (type & IRQT_HIGH) { + int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; + irq_type = IXP4XX_IRQ_LEVEL; + } else if (type & IRQT_LOW) { + int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; + irq_type = IXP4XX_IRQ_LEVEL; + } + + ixp4xx_config_irq(irq, irq_type); + + if (line >= 8) { /* pins 8-15 */ + line -= 8; + int_reg = IXP4XX_GPIO_GPIT2R; + } else { /* pins 0-7 */ + int_reg = IXP4XX_GPIO_GPIT1R; + } + + /* Clear the style for the appropriate pin */ + *int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR << + (line * IXP4XX_GPIO_STYLE_SIZE)); + + /* Set the new style */ + *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); +} + static void ixp4xx_irq_mask(unsigned int irq) { if (cpu_is_ixp46x() && irq >= 32) @@ -183,12 +162,6 @@ static void ixp4xx_irq_unmask(unsigned int irq) static void ixp4xx_irq_ack(unsigned int irq) { - static int irq2gpio[32] = { - -1, -1, -1, -1, -1, -1, 0, 1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, 2, 3, 4, 5, 6, - 7, 8, 9, 10, 11, 12, -1, -1, - }; int line = (irq < 32) ? irq2gpio[irq] : -1; if (line >= 0) @@ -206,15 +179,17 @@ static void ixp4xx_irq_level_unmask(unsigned int irq) } static struct irqchip ixp4xx_irq_level_chip = { - .ack = ixp4xx_irq_mask, - .mask = ixp4xx_irq_mask, - .unmask = ixp4xx_irq_level_unmask, + .ack = ixp4xx_irq_mask, + .mask = ixp4xx_irq_mask, + .unmask = ixp4xx_irq_level_unmask, + .set_type = ixp4xx_set_irq_type, }; static struct irqchip ixp4xx_irq_edge_chip = { - .ack = ixp4xx_irq_ack, - .mask = ixp4xx_irq_mask, - .unmask = ixp4xx_irq_unmask, + .ack = ixp4xx_irq_ack, + .mask = ixp4xx_irq_mask, + .unmask = ixp4xx_irq_unmask, + .set_type = ixp4xx_set_irq_type, }; static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type) diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c index afafb42ae129..60de8a94cff5 100644 --- a/arch/arm/mach-ixp4xx/coyote-pci.c +++ b/arch/arm/mach-ixp4xx/coyote-pci.c @@ -30,11 +30,8 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); void __init coyote_pci_preinit(void) { - gpio_line_config(COYOTE_PCI_SLOT0_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - - gpio_line_config(COYOTE_PCI_SLOT1_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); + set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW); + set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW); gpio_line_isr_clear(COYOTE_PCI_SLOT0_PIN); gpio_line_isr_clear(COYOTE_PCI_SLOT1_PIN); diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index 411ea9996190..050c92768913 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -24,11 +24,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> -void __init coyote_map_io(void) -{ - ixp4xx_map_io(); -} - static struct flash_platform_data coyote_flash_data = { .map_name = "cfi_probe", .width = 2, @@ -71,7 +66,7 @@ static struct plat_serial8250_port coyote_uart_data[] = { static struct platform_device coyote_uart = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = coyote_uart_data, }, @@ -107,7 +102,7 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote") .phys_ram = PHYS_OFFSET, .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, - .map_io = coyote_map_io, + .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .boot_params = 0x0100, @@ -125,7 +120,7 @@ MACHINE_START(IXDPG425, "Intel IXDPG425") .phys_ram = PHYS_OFFSET, .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, - .map_io = coyote_map_io, + .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .boot_params = 0x0100, diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c index b18035824e3e..a66484b63d36 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c @@ -35,26 +35,20 @@ extern void ixp4xx_pci_preinit(void); extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); - /* - * The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h - * Slot 0 isn't actually populated with a card connector but - * we initialize it anyway in case a future version has the - * slot populated or someone with good soldering skills has - * some free time. - */ - - -static void gtwx5715_init_gpio(u8 pin, u32 style) -{ - gpio_line_config(pin, style | IXP4XX_GPIO_ACTIVE_LOW); - - if (style & IXP4XX_GPIO_IN) gpio_line_isr_clear(pin); -} +/* + * The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h + * Slot 0 isn't actually populated with a card connector but + * we initialize it anyway in case a future version has the + * slot populated or someone with good soldering skills has + * some free time. + */ void __init gtwx5715_pci_preinit(void) { - gtwx5715_init_gpio(GTWX5715_PCI_SLOT0_INTA_GPIO, IXP4XX_GPIO_IN); - gtwx5715_init_gpio(GTWX5715_PCI_SLOT1_INTA_GPIO, IXP4XX_GPIO_IN); + set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQT_LOW); + set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQT_LOW); + set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQT_LOW); + set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQT_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index 333459d6aa46..29a6d02fa851 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -93,7 +93,7 @@ static struct plat_serial8250_port gtwx5715_uart_platform_data[] = { static struct platform_device gtwx5715_uart_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = gtwx5715_uart_platform_data, }, @@ -101,12 +101,6 @@ static struct platform_device gtwx5715_uart_device = { .resource = gtwx5715_uart_resources, }; - -void __init gtwx5715_map_io(void) -{ - ixp4xx_map_io(); -} - static struct flash_platform_data gtwx5715_flash_data = { .map_name = "cfi_probe", .width = 2, @@ -144,7 +138,7 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)") .phys_ram = PHYS_OFFSET, .phys_io = IXP4XX_UART2_BASE_PHYS, .io_pg_offst = ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc, - .map_io = gtwx5715_map_io, + .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .boot_params = 0x0100, diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c index c2ab9ebb5980..f9a1d3e7d692 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c @@ -27,14 +27,10 @@ void __init ixdp425_pci_preinit(void) { - gpio_line_config(IXDP425_PCI_INTA_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - gpio_line_config(IXDP425_PCI_INTB_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - gpio_line_config(IXDP425_PCI_INTC_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - gpio_line_config(IXDP425_PCI_INTD_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTA, IRQT_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTB, IRQT_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW); gpio_line_isr_clear(IXDP425_PCI_INTA_PIN); gpio_line_isr_clear(IXDP425_PCI_INTB_PIN); diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index fa0646c8693b..ae1fa099d5fa 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -24,11 +24,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> -void __init ixdp425_map_io(void) -{ - ixp4xx_map_io(); -} - static struct flash_platform_data ixdp425_flash_data = { .map_name = "cfi_probe", .width = 2, @@ -101,7 +96,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = { static struct platform_device ixdp425_uart = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev.platform_data = ixdp425_uart_data, .num_resources = 2, .resource = ixdp425_uart_resources @@ -133,7 +128,7 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") .phys_ram = PHYS_OFFSET, .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, - .map_io = ixdp425_map_io, + .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .boot_params = 0x0100, @@ -145,7 +140,7 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") .phys_ram = PHYS_OFFSET, .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, - .map_io = ixdp425_map_io, + .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .boot_params = 0x0100, @@ -157,7 +152,7 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") .phys_ram = PHYS_OFFSET, .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, - .map_io = ixdp425_map_io, + .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .boot_params = 0x0100, @@ -176,7 +171,7 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform") .phys_ram = PHYS_OFFSET, .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, - .map_io = ixdp425_map_io, + .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .boot_params = 0x0100, diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c index ce4563f00676..fe5e7660de1d 100644 --- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c @@ -29,8 +29,8 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); void __init ixdpg425_pci_preinit(void) { - gpio_line_config(6, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - gpio_line_config(7, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); + set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW); + set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW); gpio_line_isr_clear(6); gpio_line_isr_clear(7); diff --git a/arch/arm/mach-lh7a40x/common.h b/arch/arm/mach-lh7a40x/common.h index beda7c2602fb..578a52461fdb 100644 --- a/arch/arm/mach-lh7a40x/common.h +++ b/arch/arm/mach-lh7a40x/common.h @@ -13,4 +13,4 @@ extern struct sys_timer lh7a40x_timer; extern void lh7a400_init_irq (void); extern void lh7a404_init_irq (void); -#define IRQ_DISPATCH(irq) irq_desc[irq].handle ((irq), &irq_desc[irq], regs) +#define IRQ_DISPATCH(irq) desc_handle_irq((irq),(irq_desc + irq), regs) diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 7408ac94f771..27fc2e8e5fca 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -47,6 +47,14 @@ config MACH_OMAP_OSK TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here if you have such a board. +config OMAP_OSK_MISTRAL + bool "Mistral QVGA board Support" + depends on MACH_OMAP_OSK + help + The OSK supports an optional add-on board with a Quarter-VGA + touchscreen, PDA-ish buttons, a resume button, bicolor LED, + and camera connector. Say Y here if you have this board. + config MACH_OMAP_PERSEUS2 bool "TI Perseus2" depends on ARCH_OMAP1 && ARCH_OMAP730 diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index d386fd913f0c..181a93deaaee 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := io.o id.o irq.o time.o serial.o +obj-y := io.o id.o irq.o time.o serial.o devices.o led-y := leds.o # Specific board support @@ -23,6 +23,7 @@ endif # LEDs support led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o +led-$(CONFIG_MACH_OMAP_H3) += leds-h2p2-debug.o led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 122796ebe8f5..c209c7172a9a 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -48,19 +48,43 @@ static struct omap_usb_config generic1510_usb_config __initdata = { #if defined(CONFIG_ARCH_OMAP16XX) static struct omap_usb_config generic1610_usb_config __initdata = { +#ifdef CONFIG_USB_OTG + .otg = 1, +#endif .register_host = 1, .register_dev = 1, .hmc_mode = 16, .pins[0] = 6, }; + +static struct omap_mmc_config generic_mmc_config __initdata = { + .mmc [0] = { + .enabled = 0, + .wire4 = 0, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, + .mmc [1] = { + .enabled = 0, + .wire4 = 0, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, +}; + #endif static struct omap_board_config_kernel generic_config[] = { { OMAP_TAG_USB, NULL }, + { OMAP_TAG_MMC, &generic_mmc_config }, }; static void __init omap_generic_init(void) { + const struct omap_uart_config *uart_conf; + /* * Make sure the serial ports are muxed on at this point. * You have to mux them off in device drivers later on @@ -76,6 +100,18 @@ static void __init omap_generic_init(void) generic_config[0].data = &generic1610_usb_config; } #endif + + uart_conf = omap_get_config(OMAP_TAG_UART, struct omap_uart_config); + if (uart_conf != NULL) { + unsigned int enabled_ports, i; + + enabled_ports = uart_conf->enabled_uarts; + for (i = 0; i < 3; i++) { + if (!(enabled_ports & (1 << i))) + generic_serial_ports[i] = 0; + } + } + omap_board_config = generic_config; omap_board_config_size = ARRAY_SIZE(generic_config); omap_serial_init(generic_serial_ports); @@ -83,7 +119,7 @@ static void __init omap_generic_init(void) static void __init omap_generic_map_io(void) { - omap_map_common_io() + omap_map_common_io(); } MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index f4983ee95ab4..d46a70063b0c 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -33,6 +33,7 @@ #include <asm/mach/map.h> #include <asm/arch/gpio.h> +#include <asm/arch/mux.h> #include <asm/arch/tc.h> #include <asm/arch/usb.h> #include <asm/arch/common.h> @@ -80,8 +81,7 @@ static struct flash_platform_data h2_flash_data = { }; static struct resource h2_flash_resource = { - .start = OMAP_CS2B_PHYS, - .end = OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1, + /* This is on CS3, wherever it's mapped */ .flags = IORESOURCE_MEM, }; @@ -126,10 +126,9 @@ static void __init h2_init_smc91x(void) printk("Error requesting gpio 0 for smc91x irq\n"); return; } - omap_set_gpio_edge_ctrl(0, OMAP_GPIO_FALLING_EDGE); } -void h2_init_irq(void) +static void __init h2_init_irq(void) { omap_init_irq(); omap_gpio_init(); @@ -152,9 +151,13 @@ static struct omap_usb_config h2_usb_config __initdata = { }; static struct omap_mmc_config h2_mmc_config __initdata = { - .mmc_blocks = 1, - .mmc1_power_pin = -1, /* tps65010 gpio3 */ - .mmc1_switch_pin = OMAP_MPUIO(1), + .mmc [0] = { + .enabled = 1, + .wire4 = 1, + .wp_pin = OMAP_MPUIO(3), + .power_pin = -1, /* tps65010 gpio3 */ + .switch_pin = OMAP_MPUIO(1), + }, }; static struct omap_board_config_kernel h2_config[] = { @@ -164,6 +167,16 @@ static struct omap_board_config_kernel h2_config[] = { static void __init h2_init(void) { + /* NOTE: revC boards support NAND-boot, which can put NOR on CS2B + * and NAND (either 16bit or 8bit) on CS3. + */ + h2_flash_resource.end = h2_flash_resource.start = omap_cs3_phys(); + h2_flash_resource.end += SZ_32M - 1; + + /* MMC: card detect and WP */ + // omap_cfg_reg(U19_ARMIO1); /* CD */ + omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */ + platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); omap_board_config = h2_config; omap_board_config_size = ARRAY_SIZE(h2_config); diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 7cd419d61b40..2798613696fa 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -82,8 +82,7 @@ static struct flash_platform_data h3_flash_data = { }; static struct resource h3_flash_resource = { - .start = OMAP_CS2B_PHYS, - .end = OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1, + /* This is on CS3, wherever it's mapped */ .flags = IORESOURCE_MEM, }; @@ -161,13 +160,26 @@ static struct omap_usb_config h3_usb_config __initdata = { .pins[1] = 3, }; +static struct omap_mmc_config h3_mmc_config __initdata = { + .mmc[0] = { + .enabled = 1, + .power_pin = -1, /* tps65010 GPIO4 */ + .switch_pin = OMAP_MPUIO(1), + }, +}; + static struct omap_board_config_kernel h3_config[] = { { OMAP_TAG_USB, &h3_usb_config }, + { OMAP_TAG_MMC, &h3_mmc_config }, }; static void __init h3_init(void) { + h3_flash_resource.end = h3_flash_resource.start = omap_cs3_phys(); + h3_flash_resource.end += OMAP_CS3_SIZE - 1; (void) platform_add_devices(devices, ARRAY_SIZE(devices)); + omap_board_config = h3_config; + omap_board_config_size = ARRAY_SIZE(h3_config); } static void __init h3_init_smc91x(void) @@ -177,7 +189,6 @@ static void __init h3_init_smc91x(void) printk("Error requesting gpio 40 for smc91x irq\n"); return; } - omap_set_gpio_edge_ctrl(40, OMAP_GPIO_FALLING_EDGE); } void h3_init_irq(void) diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 91de60a91ef8..df0312b596e4 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -29,6 +29,7 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> +#include <asm/arch/mux.h> #include <asm/arch/fpga.h> #include <asm/arch/gpio.h> #include <asm/arch/tc.h> @@ -173,7 +174,6 @@ static void __init innovator_init_smc91x(void) printk("Error requesting gpio 0 for smc91x irq\n"); return; } - omap_set_gpio_edge_ctrl(0, OMAP_GPIO_RISING_EDGE); } } @@ -220,8 +220,19 @@ static struct omap_usb_config h2_usb_config __initdata = { }; #endif +static struct omap_mmc_config innovator_mmc_config __initdata = { + .mmc [0] = { + .enabled = 1, + .wire4 = 1, + .wp_pin = OMAP_MPUIO(3), + .power_pin = -1, /* FPGA F3 UIO42 */ + .switch_pin = -1, /* FPGA F4 UIO43 */ + }, +}; + static struct omap_board_config_kernel innovator_config[] = { { OMAP_TAG_USB, NULL }, + { OMAP_TAG_MMC, &innovator_mmc_config }, }; static void __init innovator_init(void) diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c index 6750b2014092..d904e643f5ec 100644 --- a/arch/arm/mach-omap1/board-netstar.c +++ b/arch/arm/mach-omap1/board-netstar.c @@ -75,16 +75,15 @@ static void __init netstar_init(void) mdelay(50); /* 50ms until PHY ready */ /* smc91x interrupt pin */ omap_request_gpio(8); - omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE); omap_request_gpio(12); omap_request_gpio(13); omap_request_gpio(14); omap_request_gpio(15); - omap_set_gpio_edge_ctrl(12, OMAP_GPIO_FALLING_EDGE); - omap_set_gpio_edge_ctrl(13, OMAP_GPIO_FALLING_EDGE); - omap_set_gpio_edge_ctrl(14, OMAP_GPIO_FALLING_EDGE); - omap_set_gpio_edge_ctrl(15, OMAP_GPIO_FALLING_EDGE); + set_irq_type(OMAP_GPIO_IRQ(12), IRQT_FALLING); + set_irq_type(OMAP_GPIO_IRQ(13), IRQT_FALLING); + set_irq_type(OMAP_GPIO_IRQ(14), IRQT_FALLING); + set_irq_type(OMAP_GPIO_IRQ(15), IRQT_FALLING); platform_add_devices(netstar_devices, ARRAY_SIZE(netstar_devices)); diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 6844e536c698..21103df50415 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -29,11 +29,16 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/interrupt.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> #include <asm/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/flash.h> #include <asm/arch/gpio.h> #include <asm/arch/usb.h> @@ -41,12 +46,56 @@ #include <asm/arch/tc.h> #include <asm/arch/common.h> -static struct map_desc osk5912_io_desc[] __initdata = { -{ OMAP_OSK_NOR_FLASH_BASE, OMAP_OSK_NOR_FLASH_START, OMAP_OSK_NOR_FLASH_SIZE, - MT_DEVICE }, +static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0}; + +static struct mtd_partition osk_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = 0, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } }; -static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0}; +static struct flash_platform_data osk_flash_data = { + .map_name = "cfi_probe", + .width = 2, + .parts = osk_partitions, + .nr_parts = ARRAY_SIZE(osk_partitions), +}; + +static struct resource osk_flash_resource = { + /* this is on CS3, wherever it's mapped */ + .flags = IORESOURCE_MEM, +}; + +static struct platform_device osk5912_flash_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &osk_flash_data, + }, + .num_resources = 1, + .resource = &osk_flash_resource, +}; static struct resource osk5912_smc91x_resources[] = { [0] = { @@ -86,9 +135,16 @@ static struct platform_device osk5912_cf_device = { .resource = osk5912_cf_resources, }; +static struct platform_device osk5912_mcbsp1_device = { + .name = "omap_mcbsp", + .id = 1, +}; + static struct platform_device *osk5912_devices[] __initdata = { + &osk5912_flash_device, &osk5912_smc91x_device, &osk5912_cf_device, + &osk5912_mcbsp1_device, }; static void __init osk_init_smc91x(void) @@ -97,7 +153,6 @@ static void __init osk_init_smc91x(void) printk("Error requesting gpio 0 for smc91x irq\n"); return; } - omap_set_gpio_edge_ctrl(0, OMAP_GPIO_RISING_EDGE); /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */ EMIFS_CCS(1) |= 0x2; @@ -110,11 +165,11 @@ static void __init osk_init_cf(void) printk("Error requesting gpio 62 for CF irq\n"); return; } - /* it's really active-low */ - omap_set_gpio_edge_ctrl(62, OMAP_GPIO_FALLING_EDGE); + /* the CF I/O IRQ is really active-low */ + set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING); } -void osk_init_irq(void) +static void __init osk_init_irq(void) { omap_init_irq(); omap_gpio_init(); @@ -142,18 +197,69 @@ static struct omap_board_config_kernel osk_config[] = { { OMAP_TAG_USB, &osk_usb_config }, }; +#ifdef CONFIG_OMAP_OSK_MISTRAL + +#ifdef CONFIG_PM +static irqreturn_t +osk_mistral_wake_interrupt(int irq, void *ignored, struct pt_regs *regs) +{ + return IRQ_HANDLED; +} +#endif + +static void __init osk_mistral_init(void) +{ + /* FIXME here's where to feed in framebuffer, touchpad, and + * keyboard setup ... not in the drivers for those devices! + * + * NOTE: we could actually tell if there's a Mistral board + * attached, e.g. by trying to read something from the ads7846. + * But this is too early for that... + */ + + /* the sideways button (SW1) is for use as a "wakeup" button */ + omap_cfg_reg(N15_1610_MPUIO2); + if (omap_request_gpio(OMAP_MPUIO(2)) == 0) { + int ret = 0; + omap_set_gpio_direction(OMAP_MPUIO(2), 1); + set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING); +#ifdef CONFIG_PM + /* share the IRQ in case someone wants to use the + * button for more than wakeup from system sleep. + */ + ret = request_irq(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), + &osk_mistral_wake_interrupt, + SA_SHIRQ, "mistral_wakeup", + &osk_mistral_wake_interrupt); + if (ret != 0) { + omap_free_gpio(OMAP_MPUIO(2)); + printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n", + ret); + } else + enable_irq_wake(OMAP_GPIO_IRQ(OMAP_MPUIO(2))); +#endif + } else + printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n"); +} +#else +static void __init osk_mistral_init(void) { } +#endif + static void __init osk_init(void) { + osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys(); + osk_flash_resource.end += SZ_32M - 1; platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices)); omap_board_config = osk_config; omap_board_config_size = ARRAY_SIZE(osk_config); USB_TRANSCEIVER_CTRL_REG |= (3 << 1); + + osk_mistral_init(); } static void __init osk_map_io(void) { omap_map_common_io(); - iotable_init(osk5912_io_desc, ARRAY_SIZE(osk5912_io_desc)); omap_serial_init(osk_serial_ports); } diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 213317392d9b..107c68c8ab54 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -24,6 +24,7 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> +#include <asm/arch/tc.h> #include <asm/arch/gpio.h> #include <asm/arch/mux.h> #include <asm/arch/fpga.h> @@ -83,8 +84,8 @@ static struct flash_platform_data p2_flash_data = { }; static struct resource p2_flash_resource = { - .start = OMAP_FLASH_0_START, - .end = OMAP_FLASH_0_START + OMAP_FLASH_0_SIZE - 1, + .start = OMAP_CS0_PHYS, + .end = OMAP_CS0_PHYS + SZ_32M - 1, .flags = IORESOURCE_MEM, }; diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index e42281988990..bf30b1acda0b 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -25,13 +25,14 @@ #include <asm/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/mach/flash.h> #include <asm/mach/map.h> +#include <asm/arch/common.h> #include <asm/arch/gpio.h> -#include <asm/arch/tc.h> #include <asm/arch/mux.h> +#include <asm/arch/tc.h> #include <asm/arch/usb.h> -#include <asm/arch/common.h> extern void omap_init_time(void); extern int omap_gpio_init(void); @@ -74,7 +75,7 @@ static struct plat_serial8250_port voiceblue_ports[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 1, + .id = PLAT8250_DEV_PLATFORM1, .dev = { .platform_data = voiceblue_ports, }, @@ -86,6 +87,27 @@ static int __init ext_uart_init(void) } arch_initcall(ext_uart_init); +static struct flash_platform_data voiceblue_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource voiceblue_flash_resource = { + .start = OMAP_CS0_PHYS, + .end = OMAP_CS0_PHYS + SZ_32M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device voiceblue_flash_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &voiceblue_flash_data, + }, + .num_resources = 1, + .resource = &voiceblue_flash_resource, +}; + static struct resource voiceblue_smc91x_resources[] = { [0] = { .start = OMAP_CS2_PHYS + 0x300, @@ -107,6 +129,7 @@ static struct platform_device voiceblue_smc91x_device = { }; static struct platform_device *voiceblue_devices[] __initdata = { + &voiceblue_flash_device, &voiceblue_smc91x_device, }; @@ -119,8 +142,17 @@ static struct omap_usb_config voiceblue_usb_config __initdata = { .pins[2] = 6, }; +static struct omap_mmc_config voiceblue_mmc_config __initdata = { + .mmc[0] = { + .enabled = 1, + .power_pin = 2, + .switch_pin = -1, + }, +}; + static struct omap_board_config_kernel voiceblue_config[] = { { OMAP_TAG_USB, &voiceblue_usb_config }, + { OMAP_TAG_MMC, &voiceblue_mmc_config }, }; static void __init voiceblue_init_irq(void) @@ -131,9 +163,6 @@ static void __init voiceblue_init_irq(void) static void __init voiceblue_init(void) { - /* There is a good chance board is going up, so enable Power LED - * (it is connected through invertor) */ - omap_writeb(0x00, OMAP_LPG1_LCR); /* Watchdog */ omap_request_gpio(0); /* smc91x reset */ @@ -145,7 +174,6 @@ static void __init voiceblue_init(void) mdelay(50); /* 50ms until PHY ready */ /* smc91x interrupt pin */ omap_request_gpio(8); - omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE); /* 16C554 reset*/ omap_request_gpio(6); omap_set_gpio_direction(6, 0); @@ -155,14 +183,19 @@ static void __init voiceblue_init(void) omap_request_gpio(13); omap_request_gpio(14); omap_request_gpio(15); - omap_set_gpio_edge_ctrl(12, OMAP_GPIO_RISING_EDGE); - omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE); - omap_set_gpio_edge_ctrl(14, OMAP_GPIO_RISING_EDGE); - omap_set_gpio_edge_ctrl(15, OMAP_GPIO_RISING_EDGE); + set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); omap_board_config = voiceblue_config; omap_board_config_size = ARRAY_SIZE(voiceblue_config); + + /* There is a good chance board is going up, so enable power LED + * (it is connected through invertor) */ + omap_writeb(0x00, OMAP_LPG1_LCR); + omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ } static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; @@ -184,9 +217,9 @@ static int panic_event(struct notifier_block *this, unsigned long event, if (test_and_set_bit(MACHINE_PANICED, &machine_state)) return NOTIFY_DONE; - /* Flash Power LED - * (TODO: Enable clock right way (enabled in bootloader already)) */ + /* Flash power LED */ omap_writeb(0x78, OMAP_LPG1_LCR); + omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */ return NOTIFY_DONE; } @@ -195,15 +228,14 @@ static struct notifier_block panic_block = { .notifier_call = panic_event, }; -static int __init setup_notifier(void) +static int __init voiceblue_setup(void) { /* Setup panic notifier */ notifier_chain_register(&panic_notifier_list, &panic_block); return 0; } - -postcore_initcall(setup_notifier); +postcore_initcall(voiceblue_setup); static int wdt_gpio_state; diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c new file mode 100644 index 000000000000..e8b3981444cd --- /dev/null +++ b/arch/arm/mach-omap1/devices.c @@ -0,0 +1,351 @@ +/* + * linux/arch/arm/mach-omap1/devices.c + * + * OMAP1 platform device setup/initialization + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/mach-types.h> +#include <asm/mach/map.h> + +#include <asm/arch/tc.h> +#include <asm/arch/board.h> +#include <asm/arch/mux.h> +#include <asm/arch/gpio.h> + + +static void omap_nop_release(struct device *dev) +{ + /* Nothing */ +} + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) + +#define OMAP_I2C_BASE 0xfffb3800 + +static struct resource i2c_resources[] = { + { + .start = OMAP_I2C_BASE, + .end = OMAP_I2C_BASE + 0x3f, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_I2C, + .flags = IORESOURCE_IRQ, + }, +}; + +/* DMA not used; works around erratum writing to non-empty i2c fifo */ + +static struct platform_device omap_i2c_device = { + .name = "i2c_omap", + .id = -1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(i2c_resources), + .resource = i2c_resources, +}; + +static void omap_init_i2c(void) +{ + /* FIXME define and use a boot tag, in case of boards that + * either don't wire up I2C, or chips that mux it differently... + * it can include clocking and address info, maybe more. + */ + omap_cfg_reg(I2C_SCL); + omap_cfg_reg(I2C_SDA); + + (void) platform_device_register(&omap_i2c_device); +} +#else +static inline void omap_init_i2c(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_OMAP1610_IR) || defined(CONFIG_OMAP161O_IR_MODULE) + +static u64 irda_dmamask = 0xffffffff; + +static struct platform_device omap1610ir_device = { + .name = "omap1610-ir", + .id = -1, + .dev = { + .release = omap_nop_release, + .dma_mask = &irda_dmamask, + }, +}; + +static void omap_init_irda(void) +{ + /* FIXME define and use a boot tag, members something like: + * u8 uart; // uart1, or uart3 + * ... but driver only handles uart3 for now + * s16 fir_sel; // gpio for SIR vs FIR + * ... may prefer a callback for SIR/MIR/FIR mode select; + * while h2 uses a GPIO, H3 uses a gpio expander + */ + if (machine_is_omap_h2() + || machine_is_omap_h3()) + (void) platform_device_register(&omap1610ir_device); +} +#else +static inline void omap_init_irda(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) + +#define OMAP_MMC1_BASE 0xfffb7800 +#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */ + +static struct omap_mmc_conf mmc1_conf; + +static u64 mmc1_dmamask = 0xffffffff; + +static struct resource mmc1_resources[] = { + { + .start = IO_ADDRESS(OMAP_MMC1_BASE), + .end = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_MMC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mmc_omap_device1 = { + .name = "mmci-omap", + .id = 1, + .dev = { + .release = omap_nop_release, + .dma_mask = &mmc1_dmamask, + .platform_data = &mmc1_conf, + }, + .num_resources = ARRAY_SIZE(mmc1_resources), + .resource = mmc1_resources, +}; + +#ifdef CONFIG_ARCH_OMAP16XX + +static struct omap_mmc_conf mmc2_conf; + +static u64 mmc2_dmamask = 0xffffffff; + +static struct resource mmc2_resources[] = { + { + .start = IO_ADDRESS(OMAP_MMC2_BASE), + .end = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_1610_MMC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mmc_omap_device2 = { + .name = "mmci-omap", + .id = 2, + .dev = { + .release = omap_nop_release, + .dma_mask = &mmc2_dmamask, + .platform_data = &mmc2_conf, + }, + .num_resources = ARRAY_SIZE(mmc2_resources), + .resource = mmc2_resources, +}; +#endif + +static void __init omap_init_mmc(void) +{ + const struct omap_mmc_config *mmc_conf; + const struct omap_mmc_conf *mmc; + + /* NOTE: assumes MMC was never (wrongly) enabled */ + mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config); + if (!mmc_conf) + return; + + /* block 1 is always available and has just one pinout option */ + mmc = &mmc_conf->mmc[0]; + if (mmc->enabled) { + omap_cfg_reg(MMC_CMD); + omap_cfg_reg(MMC_CLK); + omap_cfg_reg(MMC_DAT0); + if (cpu_is_omap1710()) { + omap_cfg_reg(M15_1710_MMC_CLKI); + omap_cfg_reg(P19_1710_MMC_CMDDIR); + omap_cfg_reg(P20_1710_MMC_DATDIR0); + } + if (mmc->wire4) { + omap_cfg_reg(MMC_DAT1); + /* NOTE: DAT2 can be on W10 (here) or M15 */ + if (!mmc->nomux) + omap_cfg_reg(MMC_DAT2); + omap_cfg_reg(MMC_DAT3); + } + mmc1_conf = *mmc; + (void) platform_device_register(&mmc_omap_device1); + } + +#ifdef CONFIG_ARCH_OMAP16XX + /* block 2 is on newer chips, and has many pinout options */ + mmc = &mmc_conf->mmc[1]; + if (mmc->enabled) { + if (!mmc->nomux) { + omap_cfg_reg(Y8_1610_MMC2_CMD); + omap_cfg_reg(Y10_1610_MMC2_CLK); + omap_cfg_reg(R18_1610_MMC2_CLKIN); + omap_cfg_reg(W8_1610_MMC2_DAT0); + if (mmc->wire4) { + omap_cfg_reg(V8_1610_MMC2_DAT1); + omap_cfg_reg(W15_1610_MMC2_DAT2); + omap_cfg_reg(R10_1610_MMC2_DAT3); + } + + /* These are needed for the level shifter */ + omap_cfg_reg(V9_1610_MMC2_CMDDIR); + omap_cfg_reg(V5_1610_MMC2_DATDIR0); + omap_cfg_reg(W19_1610_MMC2_DATDIR1); + } + + /* Feedback clock must be set on OMAP-1710 MMC2 */ + if (cpu_is_omap1710()) + omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24), + MOD_CONF_CTRL_1); + mmc2_conf = *mmc; + (void) platform_device_register(&mmc_omap_device2); + } +#endif + return; +} +#else +static inline void omap_init_mmc(void) {} +#endif + +#if defined(CONFIG_OMAP_RTC) || defined(CONFIG_OMAP_RTC) + +#define OMAP_RTC_BASE 0xfffb4800 + +static struct resource rtc_resources[] = { + { + .start = OMAP_RTC_BASE, + .end = OMAP_RTC_BASE + 0x5f, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_RTC_TIMER, + .flags = IORESOURCE_IRQ, + }, + { + .start = INT_RTC_ALARM, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device omap_rtc_device = { + .name = "omap_rtc", + .id = -1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + +static void omap_init_rtc(void) +{ + (void) platform_device_register(&omap_rtc_device); +} +#else +static inline void omap_init_rtc(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_OMAP16XX_WATCHDOG) || defined(CONFIG_OMAP16XX_WATCHDOG_MODULE) + +#define OMAP_WDT_BASE 0xfffeb000 + +static struct resource wdt_resources[] = { + { + .start = OMAP_WDT_BASE, + .end = OMAP_WDT_BASE + 0x4f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_wdt_device = { + .name = "omap1610_wdt", + .id = -1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +static void omap_init_wdt(void) +{ + (void) platform_device_register(&omap_wdt_device); +} +#else +static inline void omap_init_wdt(void) {} +#endif + + +/*-------------------------------------------------------------------------*/ + +/* + * This gets called after board-specific INIT_MACHINE, and initializes most + * on-chip peripherals accessible on this board (except for few like USB): + * + * (a) Does any "standard config" pin muxing needed. Board-specific + * code will have muxed GPIO pins and done "nonstandard" setup; + * that code could live in the boot loader. + * (b) Populating board-specific platform_data with the data drivers + * rely on to handle wiring variations. + * (c) Creating platform devices as meaningful on this board and + * with this kernel configuration. + * + * Claiming GPIOs, and setting their direction and initial values, is the + * responsibility of the device drivers. So is responding to probe(). + * + * Board-specific knowlege like creating devices or pin setup is to be + * kept out of drivers as much as possible. In particular, pin setup + * may be handled by the boot loader, and drivers should expect it will + * normally have been done by the time they're probed. + */ +static int __init omap_init_devices(void) +{ + /* please keep these calls, and their implementations above, + * in alphabetical order so they're easier to sort through. + */ + omap_init_i2c(); + omap_init_irda(); + omap_init_mmc(); + omap_init_rtc(); + omap_init_wdt(); + + return 0; +} +arch_initcall(omap_init_devices); + diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 7c08f6c2e1d0..aca2a120813a 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/fpga.c + * linux/arch/arm/mach-omap1/fpga.c * * Interrupt handler for OMAP-1510 Innovator FPGA * @@ -102,7 +102,7 @@ void innovator_fpga_IRQ_demux(unsigned int irq, struct irqdesc *desc, fpga_irq++, stat >>= 1) { if (stat & 1) { d = irq_desc + fpga_irq; - d->handle(fpga_irq, d, regs); + desc_handle_irq(fpga_irq, d, regs); } } } @@ -181,7 +181,7 @@ void omap1510_fpga_init_irq(void) */ omap_request_gpio(13); omap_set_gpio_direction(13, 1); - omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE); + set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING); set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux); } diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 207df0fe934d..eb8261d7dead 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -19,6 +19,7 @@ extern int clk_init(void); extern void omap_check_revision(void); +extern void omap_sram_init(void); /* * The machine specific code may provide the extra mapping besides the @@ -32,7 +33,6 @@ static struct map_desc omap_io_desc[] __initdata = { static struct map_desc omap730_io_desc[] __initdata = { { OMAP730_DSP_BASE, OMAP730_DSP_START, OMAP730_DSP_SIZE, MT_DEVICE }, { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE }, - { OMAP730_SRAM_BASE, OMAP730_SRAM_START, OMAP730_SRAM_SIZE, MT_DEVICE } }; #endif @@ -40,27 +40,13 @@ static struct map_desc omap730_io_desc[] __initdata = { static struct map_desc omap1510_io_desc[] __initdata = { { OMAP1510_DSP_BASE, OMAP1510_DSP_START, OMAP1510_DSP_SIZE, MT_DEVICE }, { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE }, - { OMAP1510_SRAM_BASE, OMAP1510_SRAM_START, OMAP1510_SRAM_SIZE, MT_DEVICE } }; #endif #if defined(CONFIG_ARCH_OMAP16XX) -static struct map_desc omap1610_io_desc[] __initdata = { +static struct map_desc omap16xx_io_desc[] __initdata = { { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE }, { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE }, - { OMAP16XX_SRAM_BASE, OMAP16XX_SRAM_START, OMAP1610_SRAM_SIZE, MT_DEVICE } -}; - -static struct map_desc omap5912_io_desc[] __initdata = { - { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE }, - { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE }, -/* - * The OMAP5912 has 250kByte internal SRAM. Because the mapping is baseed on page - * size (4kByte), it seems that the last 2kByte (=0x800) of the 250kByte are not mapped. - * Add additional 2kByte (0x800) so that the last page is mapped and the last 2kByte - * can be used. - */ - { OMAP16XX_SRAM_BASE, OMAP16XX_SRAM_START, OMAP5912_SRAM_SIZE + 0x800, MT_DEVICE } }; #endif @@ -86,14 +72,13 @@ static void __init _omap_map_io(void) } #endif #if defined(CONFIG_ARCH_OMAP16XX) - if (cpu_is_omap1610() || cpu_is_omap1710()) { - iotable_init(omap1610_io_desc, ARRAY_SIZE(omap1610_io_desc)); - } - if (cpu_is_omap5912()) { - iotable_init(omap5912_io_desc, ARRAY_SIZE(omap5912_io_desc)); + if (cpu_is_omap16xx()) { + iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc)); } #endif + omap_sram_init(); + /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort * on a Posted Write in the TIPB Bridge". */ @@ -108,8 +93,9 @@ static void __init _omap_map_io(void) /* * This should only get called from board specific init */ -void omap_map_common_io(void) +void __init omap_map_common_io(void) { if (!initialized) _omap_map_io(); } + diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index a11b6d807352..192ce6055faa 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/irq.c + * linux/arch/arm/mach-omap1/irq.c * * Interrupt handler for all OMAP boards * @@ -165,10 +165,10 @@ static struct omap_irq_bank omap1610_irq_banks[] = { #endif static struct irqchip omap_irq_chip = { - .ack = omap_mask_ack_irq, - .mask = omap_mask_irq, - .unmask = omap_unmask_irq, - .wake = omap_wake_irq, + .ack = omap_mask_ack_irq, + .mask = omap_mask_irq, + .unmask = omap_unmask_irq, + .set_wake = omap_wake_irq, }; void __init omap_init_irq(void) diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index ec0d8285f243..be283cda63dd 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/leds-h2p2-debug.c + * linux/arch/arm/mach-omap1/leds-h2p2-debug.c * * Copyright 2003 by Texas Instruments Incorporated * @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/kernel_stat.h> #include <linux/sched.h> +#include <linux/version.h> #include <asm/io.h> #include <asm/hardware.h> diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c index 8043b7d0f66e..c8ffd1ddcded 100644 --- a/arch/arm/mach-omap1/leds-innovator.c +++ b/arch/arm/mach-omap1/leds-innovator.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/leds-innovator.c + * linux/arch/arm/mach-omap1/leds-innovator.c */ #include <linux/config.h> #include <linux/init.h> diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c index 4a0e8b9d4fc3..2c8bda847c18 100644 --- a/arch/arm/mach-omap1/leds-osk.c +++ b/arch/arm/mach-omap1/leds-osk.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/leds-osk.c + * linux/arch/arm/mach-omap1/leds-osk.c * * LED driver for OSK, and optionally Mistral QVGA, boards */ @@ -64,7 +64,7 @@ static void tps_work(void *unused) static DECLARE_WORK(work, tps_work, NULL); -#ifdef CONFIG_FB_OMAP +#ifdef CONFIG_OMAP_OSK_MISTRAL /* For now, all system indicators require the Mistral board, since that * LED can be manipulated without a task context. This LED is either red, @@ -127,7 +127,7 @@ void osk_leds_event(led_event_t evt) hw_led_state = 0; break; -#ifdef CONFIG_FB_OMAP +#ifdef CONFIG_OMAP_OSK_MISTRAL case led_timer: hw_led_state ^= TIMER_LED; @@ -144,7 +144,7 @@ void osk_leds_event(led_event_t evt) mistral_setled(); break; -#endif /* CONFIG_FB_OMAP */ +#endif /* CONFIG_OMAP_OSK_MISTRAL */ /* "green" == tps LED1 (leftmost, normally power-good) * works only with DC adapter, not on battery power! diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c index 8ab21fe98e1b..5c6b1bb6e722 100644 --- a/arch/arm/mach-omap1/leds.c +++ b/arch/arm/mach-omap1/leds.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/leds.c + * linux/arch/arm/mach-omap1/leds.c * * OMAP LEDs dispatcher */ @@ -20,7 +20,9 @@ omap_leds_init(void) if (machine_is_omap_innovator()) leds_event = innovator_leds_event; - else if (machine_is_omap_h2() || machine_is_omap_perseus2()) + else if (machine_is_omap_h2() + || machine_is_omap_h3() + || machine_is_omap_perseus2()) leds_event = h2p2_dbg_leds_event; else if (machine_is_omap_osk()) @@ -30,8 +32,12 @@ omap_leds_init(void) return -1; if (machine_is_omap_h2() + || machine_is_omap_h3() || machine_is_omap_perseus2() - || machine_is_omap_osk()) { +#ifdef CONFIG_OMAP_OSK_MISTRAL + || machine_is_omap_osk() +#endif + ) { /* LED1/LED2 pins can be used as GPIO (as done here), or by * the LPG (works even in deep sleep!), to drive a bicolor diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 214e5d17c8b5..40c4f7c40e73 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -24,7 +24,11 @@ #include <asm/arch/board.h> #include <asm/arch/mux.h> +#include <asm/arch/gpio.h> #include <asm/arch/fpga.h> +#ifdef CONFIG_PM +#include <asm/arch/pm.h> +#endif static struct clk * uart1_ck = NULL; static struct clk * uart2_ck = NULL; @@ -94,7 +98,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, @@ -193,6 +197,86 @@ void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS]) } } +#ifdef CONFIG_OMAP_SERIAL_WAKE + +static irqreturn_t omap_serial_wake_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + /* Need to do something with serial port right after wake-up? */ + return IRQ_HANDLED; +} + +/* + * Reroutes serial RX lines to GPIO lines for the duration of + * sleep to allow waking up the device from serial port even + * in deep sleep. + */ +void omap_serial_wake_trigger(int enable) +{ + if (!cpu_is_omap16xx()) + return; + + if (uart1_ck != NULL) { + if (enable) + omap_cfg_reg(V14_16XX_GPIO37); + else + omap_cfg_reg(V14_16XX_UART1_RX); + } + if (uart2_ck != NULL) { + if (enable) + omap_cfg_reg(R9_16XX_GPIO18); + else + omap_cfg_reg(R9_16XX_UART2_RX); + } + if (uart3_ck != NULL) { + if (enable) + omap_cfg_reg(L14_16XX_GPIO49); + else + omap_cfg_reg(L14_16XX_UART3_RX); + } +} + +static void __init omap_serial_set_port_wakeup(int gpio_nr) +{ + int ret; + + ret = omap_request_gpio(gpio_nr); + if (ret < 0) { + printk(KERN_ERR "Could not request UART wake GPIO: %i\n", + gpio_nr); + return; + } + omap_set_gpio_direction(gpio_nr, 1); + set_irq_type(OMAP_GPIO_IRQ(gpio_nr), IRQT_RISING); + ret = request_irq(OMAP_GPIO_IRQ(gpio_nr), &omap_serial_wake_interrupt, + 0, "serial wakeup", NULL); + if (ret) { + omap_free_gpio(gpio_nr); + printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n", + gpio_nr); + return; + } + enable_irq_wake(OMAP_GPIO_IRQ(gpio_nr)); +} + +static int __init omap_serial_wakeup_init(void) +{ + if (!cpu_is_omap16xx()) + return 0; + + if (uart1_ck != NULL) + omap_serial_set_port_wakeup(37); + if (uart2_ck != NULL) + omap_serial_set_port_wakeup(18); + if (uart3_ck != NULL) + omap_serial_set_port_wakeup(49); + + return 0; +} +late_initcall(omap_serial_wakeup_init); + +#endif /* CONFIG_OMAP_SERIAL_WAKE */ + static int __init omap_init(void) { return platform_device_register(&serial_device); diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index d540539c9bbb..191a9b1ee9b7 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -247,13 +247,6 @@ unsigned long long sched_clock(void) #define OMAP_32K_TIMER_TCR 0x04 #define OMAP_32K_TICKS_PER_HZ (32768 / HZ) -#if (32768 % HZ) != 0 -/* We cannot ignore modulo. - * Potential error can be as high as several percent. - */ -#define OMAP_32K_TICK_MODULO (32768 % HZ) -static unsigned modulo_count = 0; /* Counts 1/HZ units */ -#endif /* * TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1 @@ -296,13 +289,22 @@ static inline void omap_32k_timer_stop(void) } /* - * Rounds down to nearest usec + * Rounds down to nearest usec. Note that this will overflow for larger values. */ static inline unsigned long omap_32k_ticks_to_usecs(unsigned long ticks_32k) { return (ticks_32k * 5*5*5*5*5*5) >> 9; } +/* + * Rounds down to nearest nsec. + */ +static inline unsigned long long +omap_32k_ticks_to_nsecs(unsigned long ticks_32k) +{ + return (unsigned long long) ticks_32k * 1000 * 5*5*5*5*5*5 >> 9; +} + static unsigned long omap_32k_last_tick = 0; /* @@ -315,6 +317,15 @@ static unsigned long omap_32k_timer_gettimeoffset(void) } /* + * Returns current time from boot in nsecs. It's OK for this to wrap + * around for now, as it's just a relative time stamp. + */ +unsigned long long sched_clock(void) +{ + return omap_32k_ticks_to_nsecs(omap_32k_sync_timer_read()); +} + +/* * Timer interrupt for 32KHz timer. When dynamic tick is enabled, this * function is also called from other interrupts to remove latency * issues with dynamic tick. In the dynamic tick case, we need to lock @@ -330,19 +341,6 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, now = omap_32k_sync_timer_read(); while (now - omap_32k_last_tick >= OMAP_32K_TICKS_PER_HZ) { -#ifdef OMAP_32K_TICK_MODULO - /* Modulo addition may put omap_32k_last_tick ahead of now - * and cause unwanted repetition of the while loop. - */ - if (unlikely(now - omap_32k_last_tick == ~0)) - break; - - modulo_count += OMAP_32K_TICK_MODULO; - if (modulo_count > HZ) { - ++omap_32k_last_tick; - modulo_count -= HZ; - } -#endif omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ; timer_tick(regs); } diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 405a55f2287c..3e5f69bb5ac4 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -20,40 +20,66 @@ config ARCH_PXA_IDP select PXA25x config PXA_SHARPSL - bool "SHARP SL-5600 and SL-C7xx Models" - select PXA25x + bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" select SHARP_SCOOP select SHARP_PARAM help Say Y here if you intend to run this kernel on a - Sharp SL-5600 (Poodle), Sharp SL-C700 (Corgi), - SL-C750 (Shepherd) or a Sharp SL-C760 (Husky) - handheld computer. + Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), + SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), + SL-C3000 (Spitz) or SL-C3100 (Borzoi) handheld computer. endchoice +if PXA_SHARPSL + +choice + prompt "Select target Sharp Zaurus device range" + +config PXA_SHARPSL_25x + bool "Sharp PXA25x models (SL-5600 and SL-C7xx)" + select PXA25x + +config PXA_SHARPSL_27x + bool "Sharp PXA270 models (SL-Cxx00)" + select PXA27x + +endchoice + +endif + endmenu config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x select SHARP_LOCOMO config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x select PXA_SHARP_C7xx config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x select PXA_SHARP_C7xx config MACH_HUSKY bool "Enable Sharp SL-C760 (Husky) Support" - depends PXA_SHARPSL + depends PXA_SHARPSL_25x select PXA_SHARP_C7xx +config MACH_SPITZ + bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" + depends PXA_SHARPSL_27x + select PXA_SHARP_Cxx00 + +config MACH_BORZOI + bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" + depends PXA_SHARPSL_27x + select PXA_SHARP_Cxx00 + config PXA25x bool help @@ -74,4 +100,9 @@ config PXA_SHARP_C7xx help Enable support for all Sharp C7xx models +config PXA_SHARP_Cxx00 + bool + help + Enable common support for Sharp Cxx00 models + endif diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index efc2f657184e..f609a0f232cb 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -11,7 +11,8 @@ obj-$(CONFIG_PXA27x) += pxa27x.o obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o -obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o ssp.o +obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o +obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o ssp.o obj-$(CONFIG_MACH_POODLE) += poodle.o # Support for blinky lights diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 86b862f56e7e..426c2bc517eb 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -39,9 +39,9 @@ #include <asm/mach/sharpsl_param.h> #include <asm/hardware/scoop.h> -#include <video/w100fb.h> #include "generic.h" +#include "sharpsl.h" /* @@ -60,6 +60,15 @@ static struct scoop_config corgi_scoop_setup = { .io_out = CORGI_SCOOP_IO_OUT, }; +static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = { +{ + .dev = &corgiscoop_device.dev, + .irq = CORGI_IRQ_GPIO_CF_IRQ, + .cd_irq = CORGI_IRQ_GPIO_CF_CD, + .cd_irq_str = "PCMCIA0 CD", +}, +}; + struct platform_device corgiscoop_device = { .name = "sharp-scoop", .id = -1, @@ -78,7 +87,7 @@ struct platform_device corgiscoop_device = { * also use scoop functions and this makes the power up/down order * work correctly. */ -static struct platform_device corgissp_device = { +struct platform_device corgissp_device = { .name = "corgi-ssp", .dev = { .parent = &corgiscoop_device.dev, @@ -86,72 +95,82 @@ static struct platform_device corgissp_device = { .id = -1, }; +struct corgissp_machinfo corgi_ssp_machinfo = { + .port = 1, + .cs_lcdcon = CORGI_GPIO_LCDCON_CS, + .cs_ads7846 = CORGI_GPIO_ADS7846_CS, + .cs_max1111 = CORGI_GPIO_MAX1111_CS, + .clk_lcdcon = 76, + .clk_ads7846 = 2, + .clk_max1111 = 8, +}; + /* - * Corgi w100 Frame Buffer Device + * Corgi Backlight Device */ -static struct w100fb_mach_info corgi_fb_info = { - .w100fb_ssp_send = corgi_ssp_lcdtg_send, - .comadj = -1, - .phadadj = -1, +static struct corgibl_machinfo corgi_bl_machinfo = { + .max_intensity = 0x2f, + .set_bl_intensity = corgi_bl_set_intensity, }; -static struct resource corgi_fb_resources[] = { - [0] = { - .start = 0x08000000, - .end = 0x08ffffff, - .flags = IORESOURCE_MEM, +static struct platform_device corgibl_device = { + .name = "corgi-bl", + .dev = { + .parent = &corgifb_device.dev, + .platform_data = &corgi_bl_machinfo, }, + .id = -1, }; -static struct platform_device corgifb_device = { - .name = "w100fb", + +/* + * Corgi Keyboard Device + */ +static struct platform_device corgikbd_device = { + .name = "corgi-keyboard", .id = -1, - .dev = { - .platform_data = &corgi_fb_info, - .parent = &corgissp_device.dev, - }, - .num_resources = ARRAY_SIZE(corgi_fb_resources), - .resource = corgi_fb_resources, }; /* - * Corgi Backlight Device + * Corgi Touch Screen Device */ -static struct platform_device corgibl_device = { - .name = "corgi-bl", +static struct resource corgits_resources[] = { + [0] = { + .start = CORGI_IRQ_GPIO_TP_INT, + .end = CORGI_IRQ_GPIO_TP_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct corgits_machinfo corgi_ts_machinfo = { + .get_hsync_len = corgi_get_hsync_len, + .put_hsync = corgi_put_hsync, + .wait_hsync = corgi_wait_hsync, +}; + +static struct platform_device corgits_device = { + .name = "corgi-ts", .dev = { - .parent = &corgifb_device.dev, + .parent = &corgissp_device.dev, + .platform_data = &corgi_ts_machinfo, }, .id = -1, + .num_resources = ARRAY_SIZE(corgits_resources), + .resource = corgits_resources, }; /* * MMC/SD Device * - * The card detect interrupt isn't debounced so we delay it by HZ/4 + * The card detect interrupt isn't debounced so we delay it by 250ms * to give the card a chance to fully insert/eject. */ -static struct mmc_detect { - struct timer_list detect_timer; - void *devid; -} mmc_detect; - -static void mmc_detect_callback(unsigned long data) -{ - mmc_detect_change(mmc_detect.devid); -} - -static irqreturn_t corgi_mmc_detect_int(int irq, void *devid, struct pt_regs *regs) -{ - mmc_detect.devid=devid; - mod_timer(&mmc_detect.detect_timer, jiffies + HZ/4); - return IRQ_HANDLED; -} +static struct pxamci_platform_data corgi_mci_platform_data; -static int corgi_mci_init(struct device *dev, irqreturn_t (*unused_detect_int)(int, void *, struct pt_regs *), void *data) +static int corgi_mci_init(struct device *dev, irqreturn_t (*corgi_detect_int)(int, void *, struct pt_regs *), void *data) { int err; @@ -161,11 +180,9 @@ static int corgi_mci_init(struct device *dev, irqreturn_t (*unused_detect_int)(i pxa_gpio_mode(CORGI_GPIO_nSD_DETECT | GPIO_IN); pxa_gpio_mode(CORGI_GPIO_SD_PWR | GPIO_OUT); - init_timer(&mmc_detect.detect_timer); - mmc_detect.detect_timer.function = mmc_detect_callback; - mmc_detect.detect_timer.data = (unsigned long) &mmc_detect; + corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250); - err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_mmc_detect_int, SA_INTERRUPT, + err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int, SA_INTERRUPT, "MMC card detect", data); if (err) { printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); @@ -190,20 +207,26 @@ static void corgi_mci_setpower(struct device *dev, unsigned int vdd) } } +static int corgi_mci_get_ro(struct device *dev) +{ + return GPLR(CORGI_GPIO_nSD_WP) & GPIO_bit(CORGI_GPIO_nSD_WP); +} + static void corgi_mci_exit(struct device *dev, void *data) { free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data); - del_timer(&mmc_detect.detect_timer); } static struct pxamci_platform_data corgi_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .init = corgi_mci_init, + .get_ro = corgi_mci_get_ro, .setpower = corgi_mci_setpower, .exit = corgi_mci_exit, }; + /* * USB Device Controller */ @@ -229,18 +252,23 @@ static struct platform_device *devices[] __initdata = { &corgiscoop_device, &corgissp_device, &corgifb_device, + &corgikbd_device, &corgibl_device, + &corgits_device, }; static void __init corgi_init(void) { - corgi_fb_info.comadj=sharpsl_param.comadj; - corgi_fb_info.phadadj=sharpsl_param.phadadj; + corgi_ssp_set_machinfo(&corgi_ssp_machinfo); pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT); + pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN); pxa_set_udc_info(&udc_info); pxa_set_mci_info(&corgi_mci_platform_data); + scoop_num = 1; + scoop_devs = &corgi_pcmcia_scoop[0]; + platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c new file mode 100644 index 000000000000..c5efcd04fcbc --- /dev/null +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -0,0 +1,565 @@ +/* + * linux/drivers/video/w100fb.c + * + * Corgi/Spitz LCD Specific Code + * + * Copyright (C) 2005 Richard Purdie + * + * Connectivity: + * Corgi - LCD to ATI Imageon w100 (Wallaby) + * Spitz - LCD to PXA Framebuffer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/module.h> +#include <asm/mach-types.h> +#include <asm/arch/akita.h> +#include <asm/arch/corgi.h> +#include <asm/arch/hardware.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/sharpsl.h> +#include <asm/arch/spitz.h> +#include <asm/hardware/scoop.h> +#include <asm/mach/sharpsl_param.h> +#include "generic.h" + +/* Register Addresses */ +#define RESCTL_ADRS 0x00 +#define PHACTRL_ADRS 0x01 +#define DUTYCTRL_ADRS 0x02 +#define POWERREG0_ADRS 0x03 +#define POWERREG1_ADRS 0x04 +#define GPOR3_ADRS 0x05 +#define PICTRL_ADRS 0x06 +#define POLCTRL_ADRS 0x07 + +/* Resgister Bit Definitions */ +#define RESCTL_QVGA 0x01 +#define RESCTL_VGA 0x00 + +#define POWER1_VW_ON 0x01 /* VW Supply FET ON */ +#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */ +#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */ + +#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */ +#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */ +#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */ + +#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */ +#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */ +#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */ +#define POWER0_COM_ON 0x08 /* COM Powewr Supply ON */ +#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */ + +#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */ +#define POWER0_COM_OFF 0x00 /* COM Powewr Supply OFF */ +#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */ + +#define PICTRL_INIT_STATE 0x01 +#define PICTRL_INIOFF 0x02 +#define PICTRL_POWER_DOWN 0x04 +#define PICTRL_COM_SIGNAL_OFF 0x08 +#define PICTRL_DAC_SIGNAL_OFF 0x10 + +#define POLCTRL_SYNC_POL_FALL 0x01 +#define POLCTRL_EN_POL_FALL 0x02 +#define POLCTRL_DATA_POL_FALL 0x04 +#define POLCTRL_SYNC_ACT_H 0x08 +#define POLCTRL_EN_ACT_L 0x10 + +#define POLCTRL_SYNC_POL_RISE 0x00 +#define POLCTRL_EN_POL_RISE 0x00 +#define POLCTRL_DATA_POL_RISE 0x00 +#define POLCTRL_SYNC_ACT_L 0x00 +#define POLCTRL_EN_ACT_H 0x00 + +#define PHACTRL_PHASE_MANUAL 0x01 +#define DEFAULT_PHAD_QVGA (9) +#define DEFAULT_COMADJ (125) + +/* + * This is only a psuedo I2C interface. We can't use the standard kernel + * routines as the interface is write only. We just assume the data is acked... + */ +static void lcdtg_ssp_i2c_send(u8 data) +{ + corgi_ssp_lcdtg_send(POWERREG0_ADRS, data); + udelay(10); +} + +static void lcdtg_i2c_send_bit(u8 data) +{ + lcdtg_ssp_i2c_send(data); + lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK); + lcdtg_ssp_i2c_send(data); +} + +static void lcdtg_i2c_send_start(u8 base) +{ + lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); + lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); + lcdtg_ssp_i2c_send(base); +} + +static void lcdtg_i2c_send_stop(u8 base) +{ + lcdtg_ssp_i2c_send(base); + lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); + lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); +} + +static void lcdtg_i2c_send_byte(u8 base, u8 data) +{ + int i; + for (i = 0; i < 8; i++) { + if (data & 0x80) + lcdtg_i2c_send_bit(base | POWER0_COM_DOUT); + else + lcdtg_i2c_send_bit(base); + data <<= 1; + } +} + +static void lcdtg_i2c_wait_ack(u8 base) +{ + lcdtg_i2c_send_bit(base); +} + +static void lcdtg_set_common_voltage(u8 base_data, u8 data) +{ + /* Set Common Voltage to M62332FP via I2C */ + lcdtg_i2c_send_start(base_data); + lcdtg_i2c_send_byte(base_data, 0x9c); + lcdtg_i2c_wait_ack(base_data); + lcdtg_i2c_send_byte(base_data, 0x00); + lcdtg_i2c_wait_ack(base_data); + lcdtg_i2c_send_byte(base_data, data); + lcdtg_i2c_wait_ack(base_data); + lcdtg_i2c_send_stop(base_data); +} + +/* Set Phase Adjuct */ +static void lcdtg_set_phadadj(int mode) +{ + int adj; + switch(mode) { + case 480: + case 640: + /* Setting for VGA */ + adj = sharpsl_param.phadadj; + if (adj < 0) { + adj = PHACTRL_PHASE_MANUAL; + } else { + adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL; + } + break; + case 240: + case 320: + default: + /* Setting for QVGA */ + adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL; + break; + } + + corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj); +} + +static int lcd_inited; + +static void lcdtg_hw_init(int mode) +{ + if (!lcd_inited) { + int comadj; + + /* Initialize Internal Logic & Port */ + corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE + | PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF); + + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF + | POWER0_COM_OFF | POWER0_VCC5_OFF); + + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); + + /* VDD(+8V), SVSS(-4V) ON */ + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); + mdelay(3); + + /* DAC ON */ + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON + | POWER0_COM_OFF | POWER0_VCC5_OFF); + + /* INIB = H, INI = L */ + /* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */ + corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF); + + /* Set Common Voltage */ + comadj = sharpsl_param.comadj; + if (comadj < 0) + comadj = DEFAULT_COMADJ; + lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj); + + /* VCC5 ON, DAC ON */ + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON | + POWER0_COM_OFF | POWER0_VCC5_ON); + + /* GVSS(-8V) ON, VDD ON */ + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); + mdelay(2); + + /* COM SIGNAL ON (PICTL[3] = L) */ + corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE); + + /* COM ON, DAC ON, VCC5_ON */ + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON + | POWER0_COM_ON | POWER0_VCC5_ON); + + /* VW ON, GVSS ON, VDD ON */ + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON); + + /* Signals output enable */ + corgi_ssp_lcdtg_send(PICTRL_ADRS, 0); + + /* Set Phase Adjuct */ + lcdtg_set_phadadj(mode); + + /* Initialize for Input Signals from ATI */ + corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE + | POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H); + udelay(1000); + + lcd_inited=1; + } else { + lcdtg_set_phadadj(mode); + } + + switch(mode) { + case 480: + case 640: + /* Set Lcd Resolution (VGA) */ + corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA); + break; + case 240: + case 320: + default: + /* Set Lcd Resolution (QVGA) */ + corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA); + break; + } +} + +static void lcdtg_suspend(void) +{ + /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */ + mdelay(34); + + /* (1)VW OFF */ + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); + + /* (2)COM OFF */ + corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF); + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON); + + /* (3)Set Common Voltage Bias 0V */ + lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0); + + /* (4)GVSS OFF */ + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); + + /* (5)VCC5 OFF */ + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF); + + /* (6)Set PDWN, INIOFF, DACOFF */ + corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF | + PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF); + + /* (7)DAC OFF */ + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF); + + /* (8)VDD OFF */ + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); + + lcd_inited = 0; +} + + +/* + * Corgi w100 Frame Buffer Device + */ +#ifdef CONFIG_PXA_SHARP_C7xx + +#include <video/w100fb.h> + +static void w100_lcdtg_suspend(struct w100fb_par *par) +{ + lcdtg_suspend(); +} + +static void w100_lcdtg_init(struct w100fb_par *par) +{ + lcdtg_hw_init(par->xres); +} + + +static struct w100_tg_info corgi_lcdtg_info = { + .change = w100_lcdtg_init, + .suspend = w100_lcdtg_suspend, + .resume = w100_lcdtg_init, +}; + +static struct w100_mem_info corgi_fb_mem = { + .ext_cntl = 0x00040003, + .sdram_mode_reg = 0x00650021, + .ext_timing_cntl = 0x10002a4a, + .io_cntl = 0x7ff87012, + .size = 0x1fffff, +}; + +static struct w100_gen_regs corgi_fb_regs = { + .lcd_format = 0x00000003, + .lcdd_cntl1 = 0x01CC0000, + .lcdd_cntl2 = 0x0003FFFF, + .genlcd_cntl1 = 0x00FFFF0D, + .genlcd_cntl2 = 0x003F3003, + .genlcd_cntl3 = 0x000102aa, +}; + +static struct w100_gpio_regs corgi_fb_gpio = { + .init_data1 = 0x000000bf, + .init_data2 = 0x00000000, + .gpio_dir1 = 0x00000000, + .gpio_oe1 = 0x03c0feff, + .gpio_dir2 = 0x00000000, + .gpio_oe2 = 0x00000000, +}; + +static struct w100_mode corgi_fb_modes[] = { +{ + .xres = 480, + .yres = 640, + .left_margin = 0x56, + .right_margin = 0x55, + .upper_margin = 0x03, + .lower_margin = 0x00, + .crtc_ss = 0x82360056, + .crtc_ls = 0xA0280000, + .crtc_gs = 0x80280028, + .crtc_vpos_gs = 0x02830002, + .crtc_rev = 0x00400008, + .crtc_dclk = 0xA0000000, + .crtc_gclk = 0x8015010F, + .crtc_goe = 0x80100110, + .crtc_ps1_active = 0x41060010, + .pll_freq = 75, + .fast_pll_freq = 100, + .sysclk_src = CLK_SRC_PLL, + .sysclk_divider = 0, + .pixclk_src = CLK_SRC_PLL, + .pixclk_divider = 2, + .pixclk_divider_rotated = 6, +},{ + .xres = 240, + .yres = 320, + .left_margin = 0x27, + .right_margin = 0x2e, + .upper_margin = 0x01, + .lower_margin = 0x00, + .crtc_ss = 0x81170027, + .crtc_ls = 0xA0140000, + .crtc_gs = 0xC0140014, + .crtc_vpos_gs = 0x00010141, + .crtc_rev = 0x00400008, + .crtc_dclk = 0xA0000000, + .crtc_gclk = 0x8015010F, + .crtc_goe = 0x80100110, + .crtc_ps1_active = 0x41060010, + .pll_freq = 0, + .fast_pll_freq = 0, + .sysclk_src = CLK_SRC_XTAL, + .sysclk_divider = 0, + .pixclk_src = CLK_SRC_XTAL, + .pixclk_divider = 1, + .pixclk_divider_rotated = 1, +}, + +}; + +static struct w100fb_mach_info corgi_fb_info = { + .tg = &corgi_lcdtg_info, + .init_mode = INIT_MODE_ROTATED, + .mem = &corgi_fb_mem, + .regs = &corgi_fb_regs, + .modelist = &corgi_fb_modes[0], + .num_modes = 2, + .gpio = &corgi_fb_gpio, + .xtal_freq = 12500000, + .xtal_dbl = 0, +}; + +static struct resource corgi_fb_resources[] = { + [0] = { + .start = 0x08000000, + .end = 0x08ffffff, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device corgifb_device = { + .name = "w100fb", + .id = -1, + .num_resources = ARRAY_SIZE(corgi_fb_resources), + .resource = corgi_fb_resources, + .dev = { + .platform_data = &corgi_fb_info, + .parent = &corgissp_device.dev, + }, + +}; +#endif + + +/* + * Spitz PXA Frame Buffer Device + */ +#ifdef CONFIG_PXA_SHARP_Cxx00 + +#include <asm/arch/pxafb.h> + +void spitz_lcd_power(int on) +{ + if (on) + lcdtg_hw_init(480); + else + lcdtg_suspend(); +} + +#endif + + +/* + * Corgi/Spitz Touchscreen to LCD interface + */ +static unsigned long (*get_hsync_time)(struct device *dev); + +static void inline sharpsl_wait_sync(int gpio) +{ + while((GPLR(gpio) & GPIO_bit(gpio)) == 0); + while((GPLR(gpio) & GPIO_bit(gpio)) != 0); +} + +#ifdef CONFIG_PXA_SHARP_C7xx +unsigned long corgi_get_hsync_len(void) +{ + if (!get_hsync_time) + get_hsync_time = symbol_get(w100fb_get_hsynclen); + if (!get_hsync_time) + return 0; + + return get_hsync_time(&corgifb_device.dev); +} + +void corgi_put_hsync(void) +{ + if (get_hsync_time) + symbol_put(w100fb_get_hsynclen); +} + +void corgi_wait_hsync(void) +{ + sharpsl_wait_sync(CORGI_GPIO_HSYNC); +} +#endif + +#ifdef CONFIG_PXA_SHARP_Cxx00 +unsigned long spitz_get_hsync_len(void) +{ + if (!get_hsync_time) + get_hsync_time = symbol_get(pxafb_get_hsync_time); + if (!get_hsync_time) + return 0; + + return pxafb_get_hsync_time(&pxafb_device.dev); +} + +void spitz_put_hsync(void) +{ + if (get_hsync_time) + symbol_put(pxafb_get_hsync_time); +} + +void spitz_wait_hsync(void) +{ + sharpsl_wait_sync(SPITZ_GPIO_HSYNC); +} +#endif + +/* + * Corgi/Spitz Backlight Power + */ +#ifdef CONFIG_PXA_SHARP_C7xx +void corgi_bl_set_intensity(int intensity) +{ + if (intensity > 0x10) + intensity += 0x10; + + /* Bits 0-4 are accessed via the SSP interface */ + corgi_ssp_blduty_set(intensity & 0x1f); + + /* Bit 5 is via SCOOP */ + if (intensity & 0x0020) + set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT); + else + reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT); +} +#endif + + +#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) +void spitz_bl_set_intensity(int intensity) +{ + if (intensity > 0x10) + intensity += 0x10; + + /* Bits 0-4 are accessed via the SSP interface */ + corgi_ssp_blduty_set(intensity & 0x1f); + + /* Bit 5 is via SCOOP */ + if (intensity & 0x0020) + reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT); + else + set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT); + + if (intensity) + set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON); + else + reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON); +} +#endif + +#ifdef CONFIG_MACH_AKITA +void akita_bl_set_intensity(int intensity) +{ + if (intensity > 0x10) + intensity += 0x10; + + /* Bits 0-4 are accessed via the SSP interface */ + corgi_ssp_blduty_set(intensity & 0x1f); + + /* Bit 5 is via IO-Expander */ + if (intensity & 0x0020) + akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT); + else + akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT); + + if (intensity) + akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON); + else + akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON); +} +#endif diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 8ccffba0018f..0ef428287055 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -1,7 +1,7 @@ /* * SSP control code for Sharp Corgi devices * - * Copyright (c) 2004 Richard Purdie + * Copyright (c) 2004-2005 Richard Purdie * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -17,14 +17,16 @@ #include <linux/delay.h> #include <linux/device.h> #include <asm/hardware.h> +#include <asm/mach-types.h> #include <asm/arch/ssp.h> -#include <asm/arch/corgi.h> #include <asm/arch/pxa-regs.h> +#include "sharpsl.h" -static spinlock_t corgi_ssp_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(corgi_ssp_lock); static struct ssp_dev corgi_ssp_dev; static struct ssp_state corgi_ssp_state; +static struct corgissp_machinfo *ssp_machinfo; /* * There are three devices connected to the SSP interface: @@ -48,12 +50,12 @@ unsigned long corgi_ssp_ads7846_putget(ulong data) unsigned long ret,flag; spin_lock_irqsave(&corgi_ssp_lock, flag); - GPCR0 = GPIO_bit(CORGI_GPIO_ADS7846_CS); + GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); ssp_write_word(&corgi_ssp_dev,data); ret = ssp_read_word(&corgi_ssp_dev); - GPSR0 = GPIO_bit(CORGI_GPIO_ADS7846_CS); + GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); spin_unlock_irqrestore(&corgi_ssp_lock, flag); return ret; @@ -66,12 +68,12 @@ unsigned long corgi_ssp_ads7846_putget(ulong data) void corgi_ssp_ads7846_lock(void) { spin_lock(&corgi_ssp_lock); - GPCR0 = GPIO_bit(CORGI_GPIO_ADS7846_CS); + GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); } void corgi_ssp_ads7846_unlock(void) { - GPSR0 = GPIO_bit(CORGI_GPIO_ADS7846_CS); + GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); spin_unlock(&corgi_ssp_lock); } @@ -97,23 +99,27 @@ EXPORT_SYMBOL(corgi_ssp_ads7846_get); */ unsigned long corgi_ssp_dac_put(ulong data) { - unsigned long flag; + unsigned long flag, sscr1 = SSCR1_SPH; spin_lock_irqsave(&corgi_ssp_lock, flag); - GPCR0 = GPIO_bit(CORGI_GPIO_LCDCON_CS); + + if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi()) + sscr1 = 0; ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), SSCR1_SPH, 0, SSCR0_SerClkDiv(76)); + ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon)); ssp_enable(&corgi_ssp_dev); + GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); ssp_write_word(&corgi_ssp_dev,data); /* Read null data back from device to prevent SSP overflow */ ssp_read_word(&corgi_ssp_dev); + GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(2)); + ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); ssp_enable(&corgi_ssp_dev); - GPSR0 = GPIO_bit(CORGI_GPIO_LCDCON_CS); + spin_unlock_irqrestore(&corgi_ssp_lock, flag); return 0; @@ -141,9 +147,9 @@ int corgi_ssp_max1111_get(ulong data) int voltage,voltage1,voltage2; spin_lock_irqsave(&corgi_ssp_lock, flag); - GPCR0 = GPIO_bit(CORGI_GPIO_MAX1111_CS); + GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(8)); + ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111)); ssp_enable(&corgi_ssp_dev); udelay(1); @@ -161,9 +167,9 @@ int corgi_ssp_max1111_get(ulong data) voltage2=ssp_read_word(&corgi_ssp_dev); ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(2)); + ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); ssp_enable(&corgi_ssp_dev); - GPSR0 = GPIO_bit(CORGI_GPIO_MAX1111_CS); + GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); spin_unlock_irqrestore(&corgi_ssp_lock, flag); if (voltage1 & 0xc0 || voltage2 & 0x3f) @@ -179,25 +185,31 @@ EXPORT_SYMBOL(corgi_ssp_max1111_get); /* * Support Routines */ -int __init corgi_ssp_probe(struct device *dev) + +void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo) +{ + ssp_machinfo = machinfo; +} + +static int __init corgi_ssp_probe(struct device *dev) { int ret; /* Chip Select - Disable All */ - GPDR0 |= GPIO_bit(CORGI_GPIO_LCDCON_CS); /* output */ - GPSR0 = GPIO_bit(CORGI_GPIO_LCDCON_CS); /* High - Disable LCD Control/Timing Gen */ - GPDR0 |= GPIO_bit(CORGI_GPIO_MAX1111_CS); /* output */ - GPSR0 = GPIO_bit(CORGI_GPIO_MAX1111_CS); /* High - Disable MAX1111*/ - GPDR0 |= GPIO_bit(CORGI_GPIO_ADS7846_CS); /* output */ - GPSR0 = GPIO_bit(CORGI_GPIO_ADS7846_CS); /* High - Disable ADS7846*/ + GPDR(ssp_machinfo->cs_lcdcon) |= GPIO_bit(ssp_machinfo->cs_lcdcon); /* output */ + GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ + GPDR(ssp_machinfo->cs_max1111) |= GPIO_bit(ssp_machinfo->cs_max1111); /* output */ + GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ + GPDR(ssp_machinfo->cs_ads7846) |= GPIO_bit(ssp_machinfo->cs_ads7846); /* output */ + GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ - ret=ssp_init(&corgi_ssp_dev,1); + ret = ssp_init(&corgi_ssp_dev,ssp_machinfo->port); if (ret) printk(KERN_ERR "Unable to register SSP handler!\n"); else { ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(2)); + ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); ssp_enable(&corgi_ssp_dev); } @@ -222,9 +234,9 @@ static int corgi_ssp_suspend(struct device *dev, pm_message_t state, u32 level) static int corgi_ssp_resume(struct device *dev, u32 level) { if (level == RESUME_POWER_ON) { - GPSR0 = GPIO_bit(CORGI_GPIO_LCDCON_CS); /* High - Disable LCD Control/Timing Gen */ - GPSR0 = GPIO_bit(CORGI_GPIO_MAX1111_CS); /* High - Disable MAX1111*/ - GPSR0 = GPIO_bit(CORGI_GPIO_ADS7846_CS); /* High - Disable ADS7846*/ + GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ + GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ + GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state); ssp_enable(&corgi_ssp_dev); } diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index f3cac43124a5..539b596005fc 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -133,7 +133,7 @@ static struct irqchip pxa_low_gpio_chip = { .ack = pxa_ack_low_gpio, .mask = pxa_mask_low_irq, .unmask = pxa_unmask_low_irq, - .type = pxa_gpio_irq_type, + .set_type = pxa_gpio_irq_type, }; /* @@ -157,7 +157,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irqdesc *desc, mask >>= 2; do { if (mask & 1) - desc->handle(irq, desc, regs); + desc_handle_irq(irq, desc, regs); irq++; desc++; mask >>= 1; @@ -172,7 +172,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irqdesc *desc, desc = irq_desc + irq; do { if (mask & 1) - desc->handle(irq, desc, regs); + desc_handle_irq(irq, desc, regs); irq++; desc++; mask >>= 1; @@ -187,7 +187,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irqdesc *desc, desc = irq_desc + irq; do { if (mask & 1) - desc->handle(irq, desc, regs); + desc_handle_irq(irq, desc, regs); irq++; desc++; mask >>= 1; @@ -203,7 +203,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irqdesc *desc, desc = irq_desc + irq; do { if (mask & 1) - desc->handle(irq, desc, regs); + desc_handle_irq(irq, desc, regs); irq++; desc++; mask >>= 1; @@ -241,7 +241,7 @@ static struct irqchip pxa_muxed_gpio_chip = { .ack = pxa_ack_muxed_gpio, .mask = pxa_mask_muxed_gpio, .unmask = pxa_unmask_muxed_gpio, - .type = pxa_gpio_irq_type, + .set_type = pxa_gpio_irq_type, }; diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 6309853b59be..923f6eb774c0 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -84,7 +84,7 @@ static void lubbock_irq_handler(unsigned int irq, struct irqdesc *desc, if (likely(pending)) { irq = LUBBOCK_IRQ(0) + __ffs(pending); desc = irq_desc + irq; - desc->handle(irq, desc, regs); + desc_handle_irq(irq, desc, regs); } pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled; } while (pending); diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 827b7b5a5be8..85fdb5b1470a 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -72,7 +72,7 @@ static void mainstone_irq_handler(unsigned int irq, struct irqdesc *desc, if (likely(pending)) { irq = MAINSTONE_IRQ(0) + __ffs(pending); desc = irq_desc + irq; - desc->handle(irq, desc, regs); + desc_handle_irq(irq, desc, regs); } pending = MST_INTSETCLR & mainstone_irq_enabled; } while (pending); diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 0e4f6fab100a..47cfb8bb8318 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -62,6 +62,15 @@ struct platform_device poodle_scoop_device = { .resource = poodle_scoop_resources, }; +static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = { +{ + .dev = &poodle_scoop_device.dev, + .irq = POODLE_IRQ_GPIO_CF_IRQ, + .cd_irq = POODLE_IRQ_GPIO_CF_CD, + .cd_irq_str = "PCMCIA0 CD", +}, +}; + /* LoCoMo device */ static struct resource locomo_resources[] = { @@ -147,6 +156,9 @@ static void __init poodle_init(void) set_pxa_fb_info(&poodle_fb_info); + scoop_num = 1; + scoop_devs = &poodle_pcmcia_scoop[0]; + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) { printk(KERN_WARNING "poodle: Unable to register LoCoMo device\n"); diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h new file mode 100644 index 000000000000..3977a77aacdd --- /dev/null +++ b/arch/arm/mach-pxa/sharpsl.h @@ -0,0 +1,34 @@ +/* + * SharpSL SSP Driver + */ + +struct corgissp_machinfo { + int port; + int cs_lcdcon; + int cs_ads7846; + int cs_max1111; + int clk_lcdcon; + int clk_ads7846; + int clk_max1111; +}; + +void corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo); + +/* + * SharpSL Backlight + */ + +void corgi_bl_set_intensity(int intensity); +void spitz_bl_set_intensity(int intensity); +void akita_bl_set_intensity(int intensity); + +/* + * SharpSL Touchscreen Driver + */ + +unsigned long corgi_get_hsync_len(void); +unsigned long spitz_get_hsync_len(void); +void corgi_put_hsync(void); +void spitz_put_hsync(void); +void corgi_wait_hsync(void); +void spitz_wait_hsync(void); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c new file mode 100644 index 000000000000..568afe3d6e1a --- /dev/null +++ b/arch/arm/mach-pxa/spitz.c @@ -0,0 +1,380 @@ +/* + * Support for Sharp SL-Cxx00 Series of PDAs + * Models: SL-C3000 (Spitz), SL-C1000 (Akita) and SL-C3100 (Borzoi) + * + * Copyright (c) 2005 Richard Purdie + * + * Based on Sharp's 2.4 kernel patches/lubbock.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/major.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/mmc/host.h> + +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/pxa-regs.h> +#include <asm/arch/irq.h> +#include <asm/arch/mmc.h> +#include <asm/arch/udc.h> +#include <asm/arch/ohci.h> +#include <asm/arch/pxafb.h> +#include <asm/arch/akita.h> +#include <asm/arch/spitz.h> +#include <asm/arch/sharpsl.h> + +#include <asm/mach/sharpsl_param.h> +#include <asm/hardware/scoop.h> + +#include "generic.h" +#include "sharpsl.h" + +/* + * Spitz SCOOP Device #1 + */ +static struct resource spitz_scoop_resources[] = { + [0] = { + .start = 0x10800000, + .end = 0x10800fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct scoop_config spitz_scoop_setup = { + .io_dir = SPITZ_SCP_IO_DIR, + .io_out = SPITZ_SCP_IO_OUT, + .suspend_clr = SPITZ_SCP_SUS_CLR, + .suspend_set = SPITZ_SCP_SUS_SET, +}; + +struct platform_device spitzscoop_device = { + .name = "sharp-scoop", + .id = 0, + .dev = { + .platform_data = &spitz_scoop_setup, + }, + .num_resources = ARRAY_SIZE(spitz_scoop_resources), + .resource = spitz_scoop_resources, +}; + +/* + * Spitz SCOOP Device #2 + */ +static struct resource spitz_scoop2_resources[] = { + [0] = { + .start = 0x08800040, + .end = 0x08800fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct scoop_config spitz_scoop2_setup = { + .io_dir = SPITZ_SCP2_IO_DIR, + .io_out = SPITZ_SCP2_IO_OUT, + .suspend_clr = SPITZ_SCP2_SUS_CLR, + .suspend_set = SPITZ_SCP2_SUS_SET, +}; + +struct platform_device spitzscoop2_device = { + .name = "sharp-scoop", + .id = 1, + .dev = { + .platform_data = &spitz_scoop2_setup, + }, + .num_resources = ARRAY_SIZE(spitz_scoop2_resources), + .resource = spitz_scoop2_resources, +}; + +static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { +{ + .dev = &spitzscoop_device.dev, + .irq = SPITZ_IRQ_GPIO_CF_IRQ, + .cd_irq = SPITZ_IRQ_GPIO_CF_CD, + .cd_irq_str = "PCMCIA0 CD", +},{ + .dev = &spitzscoop2_device.dev, + .irq = SPITZ_IRQ_GPIO_CF2_IRQ, + .cd_irq = -1, +}, +}; + + +/* + * Spitz SSP Device + * + * Set the parent as the scoop device because a lot of SSP devices + * also use scoop functions and this makes the power up/down order + * work correctly. + */ +struct platform_device spitzssp_device = { + .name = "corgi-ssp", + .dev = { + .parent = &spitzscoop_device.dev, + }, + .id = -1, +}; + +struct corgissp_machinfo spitz_ssp_machinfo = { + .port = 2, + .cs_lcdcon = SPITZ_GPIO_LCDCON_CS, + .cs_ads7846 = SPITZ_GPIO_ADS7846_CS, + .cs_max1111 = SPITZ_GPIO_MAX1111_CS, + .clk_lcdcon = 520, + .clk_ads7846 = 14, + .clk_max1111 = 56, +}; + + +/* + * Spitz Backlight Device + */ +static struct corgibl_machinfo spitz_bl_machinfo = { + .max_intensity = 0x2f, +}; + +static struct platform_device spitzbl_device = { + .name = "corgi-bl", + .dev = { + .platform_data = &spitz_bl_machinfo, + }, + .id = -1, +}; + + +/* + * Spitz Keyboard Device + */ +static struct platform_device spitzkbd_device = { + .name = "spitz-keyboard", + .id = -1, +}; + + +/* + * Spitz Touch Screen Device + */ +static struct resource spitzts_resources[] = { + [0] = { + .start = SPITZ_IRQ_GPIO_TP_INT, + .end = SPITZ_IRQ_GPIO_TP_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct corgits_machinfo spitz_ts_machinfo = { + .get_hsync_len = spitz_get_hsync_len, + .put_hsync = spitz_put_hsync, + .wait_hsync = spitz_wait_hsync, +}; + +static struct platform_device spitzts_device = { + .name = "corgi-ts", + .dev = { + .parent = &spitzssp_device.dev, + .platform_data = &spitz_ts_machinfo, + }, + .id = -1, + .num_resources = ARRAY_SIZE(spitzts_resources), + .resource = spitzts_resources, +}; + + +/* + * MMC/SD Device + * + * The card detect interrupt isn't debounced so we delay it by 250ms + * to give the card a chance to fully insert/eject. + */ + +static struct pxamci_platform_data spitz_mci_platform_data; + +static int spitz_mci_init(struct device *dev, irqreturn_t (*spitz_detect_int)(int, void *, struct pt_regs *), void *data) +{ + int err; + + /* setup GPIO for PXA27x MMC controller */ + pxa_gpio_mode(GPIO32_MMCCLK_MD); + pxa_gpio_mode(GPIO112_MMCCMD_MD); + pxa_gpio_mode(GPIO92_MMCDAT0_MD); + pxa_gpio_mode(GPIO109_MMCDAT1_MD); + pxa_gpio_mode(GPIO110_MMCDAT2_MD); + pxa_gpio_mode(GPIO111_MMCDAT3_MD); + pxa_gpio_mode(SPITZ_GPIO_nSD_DETECT | GPIO_IN); + pxa_gpio_mode(SPITZ_GPIO_nSD_WP | GPIO_IN); + + spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250); + + err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int, SA_INTERRUPT, + "MMC card detect", data); + if (err) { + printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); + return -1; + } + + set_irq_type(SPITZ_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE); + + return 0; +} + +/* Power control is shared with one of the CF slots so we have a mess */ +static void spitz_mci_setpower(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data* p_d = dev->platform_data; + + unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); + + if (( 1 << vdd) & p_d->ocr_mask) { + /* printk(KERN_DEBUG "%s: on\n", __FUNCTION__); */ + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + mdelay(2); + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | 0x04); + } else { + /* printk(KERN_DEBUG "%s: off\n", __FUNCTION__); */ + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr & ~0x04); + + if (!(cpr | 0x02)) { + mdelay(1); + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + } + } +} + +static int spitz_mci_get_ro(struct device *dev) +{ + return GPLR(SPITZ_GPIO_nSD_WP) & GPIO_bit(SPITZ_GPIO_nSD_WP); +} + +static void spitz_mci_exit(struct device *dev, void *data) +{ + free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data); +} + +static struct pxamci_platform_data spitz_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = spitz_mci_init, + .get_ro = spitz_mci_get_ro, + .setpower = spitz_mci_setpower, + .exit = spitz_mci_exit, +}; + + +/* + * Spitz PXA Framebuffer + */ +static struct pxafb_mach_info spitz_pxafb_info __initdata = { + .pixclock = 19231, + .xres = 480, + .yres = 640, + .bpp = 16, + .hsync_len = 40, + .left_margin = 46, + .right_margin = 125, + .vsync_len = 3, + .upper_margin = 1, + .lower_margin = 0, + .sync = 0, + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act | LCCR0_LDDALT | LCCR0_OUC | LCCR0_CMDIM | LCCR0_RDSTM, + .lccr3 = LCCR3_PixRsEdg | LCCR3_OutEnH, + .pxafb_lcd_power = spitz_lcd_power, +}; + + +static struct platform_device *devices[] __initdata = { + &spitzscoop_device, + &spitzssp_device, + &spitzkbd_device, + &spitzts_device, + &spitzbl_device, + &spitzbattery_device, +}; + +static void __init common_init(void) +{ + PMCR = 0x00; + + /* setup sleep mode values */ + PWER = 0x00000002; + PFER = 0x00000000; + PRER = 0x00000002; + PGSR0 = 0x0158C000; + PGSR1 = 0x00FF0080; + PGSR2 = 0x0001C004; + + /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ + PCFR |= PCFR_OPDE; + + corgi_ssp_set_machinfo(&spitz_ssp_machinfo); + + pxa_gpio_mode(SPITZ_GPIO_HSYNC | GPIO_IN); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + pxa_set_mci_info(&spitz_mci_platform_data); + pxafb_device.dev.parent = &spitzssp_device.dev; + set_pxa_fb_info(&spitz_pxafb_info); +} + +static void __init spitz_init(void) +{ + scoop_num = 2; + scoop_devs = &spitz_pcmcia_scoop[0]; + spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity; + + common_init(); + + platform_device_register(&spitzscoop2_device); +} + +static void __init fixup_spitz(struct machine_desc *desc, + struct tag *tags, char **cmdline, struct meminfo *mi) +{ + sharpsl_save_param(); + mi->nr_banks = 1; + mi->bank[0].start = 0xa0000000; + mi->bank[0].node = 0; + mi->bank[0].size = (64*1024*1024); +} + +#ifdef CONFIG_MACH_SPITZ +MACHINE_START(SPITZ, "SHARP Spitz") + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = fixup_spitz, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, + .init_machine = spitz_init, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_BORZOI +MACHINE_START(BORZOI, "SHARP Borzoi") + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = fixup_spitz, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, + .init_machine = spitz_init, + .timer = &pxa_timer, +MACHINE_END +#endif diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 6e5202154f91..7dad3f1465e0 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -70,6 +70,11 @@ static unsigned long pxa_gettimeoffset (void) return usec; } +#ifdef CONFIG_NO_IDLE_HZ +static unsigned long initial_match; +static int match_posponed; +#endif + static irqreturn_t pxa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { @@ -77,11 +82,19 @@ pxa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) write_seqlock(&xtime_lock); +#ifdef CONFIG_NO_IDLE_HZ + if (match_posponed) { + match_posponed = 0; + OSMR0 = initial_match; + } +#endif + /* Loop until we get ahead of the free running timer. * This ensures an exact clock tick count and time accuracy. - * IRQs are disabled inside the loop to ensure coherence between - * lost_ticks (updated in do_timer()) and the match reg value, so we - * can use do_gettimeofday() from interrupt handlers. + * Since IRQs are disabled at this point, coherence between + * lost_ticks(updated in do_timer()) and the match reg value is + * ensured, hence we can use do_gettimeofday() from interrupt + * handlers. * * HACK ALERT: it seems that the PXA timer regs aren't updated right * away in all cases when a write occurs. We therefore compare with @@ -126,6 +139,42 @@ static void __init pxa_timer_init(void) OSCR = 0; /* initialize free-running timer, force first match */ } +#ifdef CONFIG_NO_IDLE_HZ +static int pxa_dyn_tick_enable_disable(void) +{ + /* nothing to do */ + return 0; +} + +static void pxa_dyn_tick_reprogram(unsigned long ticks) +{ + if (ticks > 1) { + initial_match = OSMR0; + OSMR0 = initial_match + ticks * LATCH; + match_posponed = 1; + } +} + +static irqreturn_t +pxa_dyn_tick_handler(int irq, void *dev_id, struct pt_regs *regs) +{ + if (match_posponed) { + match_posponed = 0; + OSMR0 = initial_match; + if ( (signed long)(initial_match - OSCR) <= 8 ) + return pxa_timer_interrupt(irq, dev_id, regs); + } + return IRQ_NONE; +} + +static struct dyn_tick_timer pxa_dyn_tick = { + .enable = pxa_dyn_tick_enable_disable, + .disable = pxa_dyn_tick_enable_disable, + .reprogram = pxa_dyn_tick_reprogram, + .handler = pxa_dyn_tick_handler, +}; +#endif + #ifdef CONFIG_PM static unsigned long osmr[4], oier; @@ -161,4 +210,7 @@ struct sys_timer pxa_timer = { .suspend = pxa_timer_suspend, .resume = pxa_timer_resume, .offset = pxa_gettimeoffset, +#ifdef CONFIG_NO_IDLE_HZ + .dyn_tick = &pxa_dyn_tick, +#endif }; diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index a10268618f74..e3587efec4bf 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -140,7 +140,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index d4d03d0daaec..06807c6ee68a 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -2,6 +2,13 @@ if ARCH_S3C2410 menu "S3C24XX Implementations" +config MACH_ANUBIS + bool "Simtec Electronics ANUBIS" + select CPU_S3C2440 + help + Say Y gere if you are using the Simtec Electronics ANUBIS + development system + config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select CPU_S3C2410 @@ -11,6 +18,14 @@ config ARCH_BAST Product page: <http://www.simtec.co.uk/products/EB2410ITX/>. +config BAST_PC104_IRQ + bool "BAST PC104 IRQ support" + depends on ARCH_BAST + default y + help + Say Y here to enable the PC104 IRQ routing on the + Simtec BAST (EB2410ITX) + config ARCH_H1940 bool "IPAQ H1940" select CPU_S3C2410 diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 55ed7c7e57da..b4f1e051c768 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -26,8 +26,13 @@ obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o +# bast extras + +obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o + # machine specific support +obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o obj-$(CONFIG_ARCH_H1940) += mach-h1940.o obj-$(CONFIG_MACH_N30) += mach-n30.o diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c index 5e5bbe893cbb..fbbeb0553006 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c2410/bast-irq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/bast-irq.c * - * Copyright (c) 2004 Simtec Electronics + * Copyright (c) 2003,2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * http://www.simtec.co.uk/products/EB2410ITX/ @@ -21,7 +21,8 @@ * * Modifications: * 08-Jan-2003 BJD Moved from central IRQ code - */ + * 21-Aug-2005 BJD Fixed missing code and compile errors +*/ #include <linux/init.h> @@ -30,12 +31,19 @@ #include <linux/ptrace.h> #include <linux/sysdev.h> +#include <asm/mach-types.h> + #include <asm/hardware.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/mach/irq.h> -#include <asm/hardware/s3c2410/irq.h> + +#include <asm/arch/regs-irq.h> +#include <asm/arch/bast-map.h> +#include <asm/arch/bast-irq.h> + +#include "irq.h" #if 0 #include <asm/debug-ll.h> @@ -79,15 +87,15 @@ bast_pc104_mask(unsigned int irqno) temp = __raw_readb(BAST_VA_PC104_IRQMASK); temp &= ~bast_pc104_irqmasks[irqno]; __raw_writeb(temp, BAST_VA_PC104_IRQMASK); - - if (temp == 0) - bast_extint_mask(IRQ_ISA); } static void -bast_pc104_ack(unsigned int irqno) +bast_pc104_maskack(unsigned int irqno) { - bast_extint_ack(IRQ_ISA); + struct irqdesc *desc = irq_desc + IRQ_ISA; + + bast_pc104_mask(irqno); + desc->chip->ack(IRQ_ISA); } static void @@ -98,14 +106,12 @@ bast_pc104_unmask(unsigned int irqno) temp = __raw_readb(BAST_VA_PC104_IRQMASK); temp |= bast_pc104_irqmasks[irqno]; __raw_writeb(temp, BAST_VA_PC104_IRQMASK); - - bast_extint_unmask(IRQ_ISA); } -static struct bast_pc104_chip = { +static struct irqchip bast_pc104_chip = { .mask = bast_pc104_mask, .unmask = bast_pc104_unmask, - .ack = bast_pc104_ack + .ack = bast_pc104_maskack }; static void @@ -119,14 +125,49 @@ bast_irq_pc104_demux(unsigned int irq, stat = __raw_readb(BAST_VA_PC104_IRQREQ) & 0xf; - for (i = 0; i < 4 && stat != 0; i++) { - if (stat & 1) { - irqno = bast_pc104_irqs[i]; - desc = irq_desc + irqno; + if (unlikely(stat == 0)) { + /* ack if we get an irq with nothing (ie, startup) */ + + desc = irq_desc + IRQ_ISA; + desc->chip->ack(IRQ_ISA); + } else { + /* handle the IRQ */ + + for (i = 0; stat != 0; i++, stat >>= 1) { + if (stat & 1) { + irqno = bast_pc104_irqs[i]; - desc->handle(irqno, desc, regs); + desc_handle_irq(irqno, irq_desc + irqno, regs); + } } + } +} - stat >>= 1; +static __init int bast_irq_init(void) +{ + unsigned int i; + + if (machine_is_bast()) { + printk(KERN_INFO "BAST PC104 IRQ routing, (c) 2005 Simtec Electronics\n"); + + /* zap all the IRQs */ + + __raw_writeb(0x0, BAST_VA_PC104_IRQMASK); + + set_irq_chained_handler(IRQ_ISA, bast_irq_pc104_demux); + + /* reigster our IRQs */ + + for (i = 0; i < 4; i++) { + unsigned int irqno = bast_pc104_irqs[i]; + + set_irq_chip(irqno, &bast_pc104_chip); + set_irq_handler(irqno, do_level_IRQ); + set_irq_flags(irqno, IRQF_VALID); + } } + + return 0; } + +arch_initcall(bast_irq_init); diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index 9a66050e887d..f59608268751 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -388,6 +388,7 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, unsigned long hclk, unsigned long pclk) { + unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); struct clk *clkp = init_clocks; int ptr; int ret; @@ -446,5 +447,13 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, } } + /* show the clock-slow value */ + + printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n", + print_mhz(xtal / ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))), + (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast", + (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on", + (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on"); + return 0; } diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c index 4664bd11adc1..0077937a7ab8 100644 --- a/arch/arm/mach-s3c2410/devs.c +++ b/arch/arm/mach-s3c2410/devs.c @@ -29,7 +29,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> - +#include <asm/arch/fb.h> #include <asm/hardware.h> #include <asm/io.h> #include <asm/irq.h> @@ -103,6 +103,15 @@ struct platform_device s3c_device_lcd = { EXPORT_SYMBOL(s3c_device_lcd); +static struct s3c2410fb_mach_info s3c2410fb_info; + +void __init set_s3c2410fb_info(struct s3c2410fb_mach_info *hard_s3c2410fb_info) +{ + memcpy(&s3c2410fb_info,hard_s3c2410fb_info,sizeof(struct s3c2410fb_mach_info)); + s3c_device_lcd.dev.platform_data = &s3c2410fb_info; +} +EXPORT_SYMBOL(set_s3c2410fb_info); + /* NAND Controller */ static struct resource s3c_nand_resource[] = { diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index 973a5fe6769c..66d8c068e940 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -184,14 +184,14 @@ struct irqchip s3c_irq_level_chip = { .ack = s3c_irq_maskack, .mask = s3c_irq_mask, .unmask = s3c_irq_unmask, - .wake = s3c_irq_wake + .set_wake = s3c_irq_wake }; static struct irqchip s3c_irq_chip = { .ack = s3c_irq_ack, .mask = s3c_irq_mask, .unmask = s3c_irq_unmask, - .wake = s3c_irq_wake + .set_wake = s3c_irq_wake }; /* S3C2410_EINTMASK @@ -350,16 +350,16 @@ static struct irqchip s3c_irqext_chip = { .mask = s3c_irqext_mask, .unmask = s3c_irqext_unmask, .ack = s3c_irqext_ack, - .type = s3c_irqext_type, - .wake = s3c_irqext_wake + .set_type = s3c_irqext_type, + .set_wake = s3c_irqext_wake }; static struct irqchip s3c_irq_eint0t4 = { .ack = s3c_irq_ack, .mask = s3c_irq_mask, .unmask = s3c_irq_unmask, - .wake = s3c_irq_wake, - .type = s3c_irqext_type, + .set_wake = s3c_irq_wake, + .set_type = s3c_irqext_type, }; /* mask values for the parent registers for each of the interrupt types */ @@ -496,11 +496,11 @@ static void s3c_irq_demux_adc(unsigned int irq, if (subsrc != 0) { if (subsrc & 1) { mydesc = irq_desc + IRQ_TC; - mydesc->handle( IRQ_TC, mydesc, regs); + desc_handle_irq(IRQ_TC, mydesc, regs); } if (subsrc & 2) { mydesc = irq_desc + IRQ_ADC; - mydesc->handle(IRQ_ADC, mydesc, regs); + desc_handle_irq(IRQ_ADC, mydesc, regs); } } } @@ -529,17 +529,17 @@ static void s3c_irq_demux_uart(unsigned int start, desc = irq_desc + start; if (subsrc & 1) - desc->handle(start, desc, regs); + desc_handle_irq(start, desc, regs); desc++; if (subsrc & 2) - desc->handle(start+1, desc, regs); + desc_handle_irq(start+1, desc, regs); desc++; if (subsrc & 4) - desc->handle(start+2, desc, regs); + desc_handle_irq(start+2, desc, regs); } } diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c new file mode 100644 index 000000000000..f87aa0b669ad --- /dev/null +++ b/arch/arm/mach-s3c2410/mach-anubis.c @@ -0,0 +1,270 @@ +/* linux/arch/arm/mach-s3c2410/mach-anubis.c + * + * Copyright (c) 2003-2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: + * 02-May-2005 BJD Copied from mach-bast.c +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/anubis-map.h> +#include <asm/arch/anubis-irq.h> +#include <asm/arch/anubis-cpld.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-lcd.h> +#include <asm/arch/nand.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> + +#include "clock.h" +#include "devs.h" +#include "cpu.h" + +#define COPYRIGHT ", (c) 2005 Simtec Electronics" + +static struct map_desc anubis_iodesc[] __initdata = { + /* ISA IO areas */ + + { (u32)S3C24XX_VA_ISA_BYTE, 0x0, SZ_16M, MT_DEVICE }, + { (u32)S3C24XX_VA_ISA_WORD, 0x0, SZ_16M, MT_DEVICE }, + + /* we could possibly compress the next set down into a set of smaller tables + * pagetables, but that would mean using an L2 section, and it still means + * we cannot actually feed the same register to an LDR due to 16K spacing + */ + + /* CPLD control registers */ + + { (u32)ANUBIS_VA_CTRL1, ANUBIS_PA_CTRL1, SZ_4K, MT_DEVICE }, + { (u32)ANUBIS_VA_CTRL2, ANUBIS_PA_CTRL2, SZ_4K, MT_DEVICE }, + + /* IDE drives */ + + { (u32)ANUBIS_IDEPRI, S3C2410_CS3, SZ_1M, MT_DEVICE }, + { (u32)ANUBIS_IDEPRIAUX, S3C2410_CS3+(1<<26), SZ_1M, MT_DEVICE }, + + { (u32)ANUBIS_IDESEC, S3C2410_CS4, SZ_1M, MT_DEVICE }, + { (u32)ANUBIS_IDESECAUX, S3C2410_CS4+(1<<26), SZ_1M, MT_DEVICE }, +}; + +#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = { + [0] = { + .name = "uclk", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, + [1] = { + .name = "pclk", + .divisor = 1, + .min_baud = 0, + .max_baud = 0. + } +}; + + +static struct s3c2410_uartcfg anubis_uartcfgs[] = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clocks = anubis_serial_clocks, + .clocks_size = ARRAY_SIZE(anubis_serial_clocks) + }, + [1] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clocks = anubis_serial_clocks, + .clocks_size = ARRAY_SIZE(anubis_serial_clocks) + }, +}; + +/* NAND Flash on Anubis board */ + +static int external_map[] = { 2 }; +static int chip0_map[] = { 0 }; +static int chip1_map[] = { 1 }; + +struct mtd_partition anubis_default_nand_part[] = { + [0] = { + .name = "Boot Agent", + .size = SZ_16K, + .offset = 0 + }, + [1] = { + .name = "/boot", + .size = SZ_4M - SZ_16K, + .offset = SZ_16K, + }, + [2] = { + .name = "user1", + .offset = SZ_4M, + .size = SZ_32M - SZ_4M, + }, + [3] = { + .name = "user2", + .offset = SZ_32M, + .size = MTDPART_SIZ_FULL, + } +}; + +/* the Anubis has 3 selectable slots for nand-flash, the two + * on-board chip areas, as well as the external slot. + * + * Note, there is no current hot-plug support for the External + * socket. +*/ + +static struct s3c2410_nand_set anubis_nand_sets[] = { + [1] = { + .name = "External", + .nr_chips = 1, + .nr_map = external_map, + .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), + .partitions = anubis_default_nand_part + }, + [0] = { + .name = "chip0", + .nr_chips = 1, + .nr_map = chip0_map, + .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), + .partitions = anubis_default_nand_part + }, + [2] = { + .name = "chip1", + .nr_chips = 1, + .nr_map = chip1_map, + .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), + .partitions = anubis_default_nand_part + }, +}; + +static void anubis_nand_select(struct s3c2410_nand_set *set, int slot) +{ + unsigned int tmp; + + slot = set->nr_map[slot] & 3; + + pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n", + slot, set, set->nr_map); + + tmp = __raw_readb(ANUBIS_VA_CTRL1); + tmp &= ~ANUBIS_CTRL1_NANDSEL; + tmp |= slot; + + pr_debug("anubis_nand: ctrl1 now %02x\n", tmp); + + __raw_writeb(tmp, ANUBIS_VA_CTRL1); +} + +static struct s3c2410_platform_nand anubis_nand_info = { + .tacls = 25, + .twrph0 = 80, + .twrph1 = 80, + .nr_sets = ARRAY_SIZE(anubis_nand_sets), + .sets = anubis_nand_sets, + .select_chip = anubis_nand_select, +}; + + +/* Standard Anubis devices */ + +static struct platform_device *anubis_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_wdt, + &s3c_device_adc, + &s3c_device_i2c, + &s3c_device_rtc, + &s3c_device_nand, +}; + +static struct clk *anubis_clocks[] = { + &s3c24xx_dclk0, + &s3c24xx_dclk1, + &s3c24xx_clkout0, + &s3c24xx_clkout1, + &s3c24xx_uclk, +}; + +static struct s3c24xx_board anubis_board __initdata = { + .devices = anubis_devices, + .devices_count = ARRAY_SIZE(anubis_devices), + .clocks = anubis_clocks, + .clocks_count = ARRAY_SIZE(anubis_clocks) +}; + +void __init anubis_map_io(void) +{ + /* initialise the clocks */ + + s3c24xx_dclk0.parent = NULL; + s3c24xx_dclk0.rate = 12*1000*1000; + + s3c24xx_dclk1.parent = NULL; + s3c24xx_dclk1.rate = 24*1000*1000; + + s3c24xx_clkout0.parent = &s3c24xx_dclk0; + s3c24xx_clkout1.parent = &s3c24xx_dclk1; + + s3c24xx_uclk.parent = &s3c24xx_clkout1; + + s3c_device_nand.dev.platform_data = &anubis_nand_info; + + s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); + s3c24xx_init_clocks(0); + s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); + s3c24xx_set_board(&anubis_board); + + /* ensure that the GPIO is setup */ + s3c2410_gpio_setpin(S3C2410_GPA0, 1); +} + +MACHINE_START(ANUBIS, "Simtec-Anubis") + /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = anubis_map_io, + .init_irq = s3c24xx_init_irq, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index e9182242da95..1a3367da6408 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -381,7 +381,7 @@ static struct plat_serial8250_port bast_sio_data[] = { static struct platform_device bast_sio = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = &bast_sio_data, }, diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index ea4fb1a97a50..6ff1889fbd21 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -45,6 +45,9 @@ //#include <asm/debug-ll.h> #include <asm/arch/regs-serial.h> +#include <asm/arch/regs-lcd.h> + +#include <asm/arch/fb.h> #include <linux/serial_core.h> @@ -88,6 +91,48 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] = { +/** + * Set lcd on or off + **/ +static struct s3c2410fb_mach_info h1940_lcdcfg __initdata = { + .fixed_syncs= 1, + .regs={ + .lcdcon1= S3C2410_LCDCON1_TFT16BPP | \ + S3C2410_LCDCON1_TFT | \ + S3C2410_LCDCON1_CLKVAL(0x0C), + + .lcdcon2= S3C2410_LCDCON2_VBPD(7) | \ + S3C2410_LCDCON2_LINEVAL(319) | \ + S3C2410_LCDCON2_VFPD(6) | \ + S3C2410_LCDCON2_VSPW(0), + + .lcdcon3= S3C2410_LCDCON3_HBPD(19) | \ + S3C2410_LCDCON3_HOZVAL(239) | \ + S3C2410_LCDCON3_HFPD(7), + + .lcdcon4= S3C2410_LCDCON4_MVAL(0) | \ + S3C2410_LCDCON4_HSPW(3), + + .lcdcon5= S3C2410_LCDCON5_FRM565 | \ + S3C2410_LCDCON5_INVVLINE | \ + S3C2410_LCDCON5_HWSWP, + }, + .lpcsel= 0x02, + .gpccon= 0xaa940659, + .gpccon_mask= 0xffffffff, + .gpcup= 0x0000ffff, + .gpcup_mask= 0xffffffff, + .gpdcon= 0xaa84aaa0, + .gpdcon_mask= 0xffffffff, + .gpdup= 0x0000faff, + .gpdup_mask= 0xffffffff, + + .width= 240, + .height= 320, + .xres= {240,240,240}, + .yres= {320,320,320}, + .bpp= {16,16,16}, +}; static struct platform_device *h1940_devices[] __initdata = { &s3c_device_usb, @@ -116,6 +161,11 @@ void __init h1940_init_irq(void) } +void __init h1940_init(void) +{ + set_s3c2410fb_info(&h1940_lcdcfg); +} + MACHINE_START(H1940, "IPAQ-H1940") /* Maintainer: Ben Dooks <ben@fluff.org> */ .phys_ram = S3C2410_SDRAM_PA, @@ -124,5 +174,6 @@ MACHINE_START(H1940, "IPAQ-H1940") .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = h1940_map_io, .init_irq = h1940_init_irq, + .init_machine = h1940_init, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 79044d9bce38..66bf5bb2b3db 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -110,34 +110,24 @@ void __init n30_init_irq(void) s3c24xx_init_irq(); } - -static int n30_usbstart_thread(void *unused) -{ - /* Turn off suspend on both USB ports, and switch the - * selectable USB port to USB device mode. */ - writel(readl(S3C2410_MISCCR) & ~0x00003008, S3C2410_MISCCR); - - /* Turn off the D+ pull up for 3 seconds so that the USB host - * at the other end will do a rescan of the USB bus. */ - s3c2410_gpio_setpin(S3C2410_GPB3, 0); - - msleep_interruptible(3*HZ); - - s3c2410_gpio_setpin(S3C2410_GPB3, 1); - - return 0; -} - +/* GPB3 is the line that controls the pull-up for the USB D+ line */ void __init n30_init(void) { s3c_device_i2c.dev.platform_data = &n30_i2ccfg; - kthread_run(n30_usbstart_thread, NULL, "n30_usbstart"); + /* Turn off suspend on both USB ports, and switch the + * selectable USB port to USB device mode. */ + + s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | + S3C2410_MISCCR_USBSUSPND0 | + S3C2410_MISCCR_USBSUSPND1, 0x0); } MACHINE_START(N30, "Acer-N30") - /* Maintainer: Christer Weinigel <christer@weinigel.se>, Ben Dooks <ben-linux@fluff.org> */ + /* Maintainer: Christer Weinigel <christer@weinigel.se>, + Ben Dooks <ben-linux@fluff.org> + */ .phys_ram = S3C2410_SDRAM_PA, .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 924e8464c212..8f9ab2893df4 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -221,7 +221,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c index 2cb798832223..4c7ccef6c207 100644 --- a/arch/arm/mach-s3c2410/pm-simtec.c +++ b/arch/arm/mach-s3c2410/pm-simtec.c @@ -48,7 +48,7 @@ static __init int pm_simtec_init(void) /* check which machine we are running on */ - if (!machine_is_bast() && !machine_is_vr1000()) + if (!machine_is_bast() && !machine_is_vr1000() && !machine_is_anubis()) return 0; printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n"); diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index 13a48ee77484..fe57d966a34d 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -585,14 +585,16 @@ static int s3c2410_pm_enter(suspend_state_t state) s3c2410_pm_check_store(); - // need to make some form of time-delta - /* send the cpu to sleep... */ __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */ s3c2410_cpu_suspend(regs_save); + /* restore the cpu state */ + + cpu_init(); + /* unset the return-from-sleep flag, to ensure reset */ tmp = __raw_readl(S3C2410_GSTATUS2); diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c index b018a1f680ce..c67e0979aec3 100644 --- a/arch/arm/mach-s3c2410/s3c2440-clock.c +++ b/arch/arm/mach-s3c2410/s3c2440-clock.c @@ -68,6 +68,7 @@ static struct clk s3c2440_clk_ac97 = { static int s3c2440_clk_add(struct sys_device *sysdev) { unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); + unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); struct clk *clk_h; struct clk *clk_p; struct clk *clk_xtal; @@ -80,8 +81,9 @@ static int s3c2440_clk_add(struct sys_device *sysdev) s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal->rate); - printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n", - print_mhz(s3c2440_clk_upll.rate)); + printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz, DVS %s\n", + print_mhz(s3c2440_clk_upll.rate), + (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); clk_p = clk_get(NULL, "pclk"); clk_h = clk_get(NULL, "hclk"); diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2410/s3c2440-irq.c index 7cb9912242a3..278d0044c85d 100644 --- a/arch/arm/mach-s3c2410/s3c2440-irq.c +++ b/arch/arm/mach-s3c2410/s3c2440-irq.c @@ -64,11 +64,11 @@ static void s3c_irq_demux_wdtac97(unsigned int irq, if (subsrc != 0) { if (subsrc & 1) { mydesc = irq_desc + IRQ_S3C2440_WDT; - mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs); + desc_handle_irq(IRQ_S3C2440_WDT, mydesc, regs); } if (subsrc & 2) { mydesc = irq_desc + IRQ_S3C2440_AC97; - mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs); + desc_handle_irq(IRQ_S3C2440_AC97, mydesc, regs); } } } @@ -122,11 +122,11 @@ static void s3c_irq_demux_cam(unsigned int irq, if (subsrc != 0) { if (subsrc & 1) { mydesc = irq_desc + IRQ_S3C2440_CAM_C; - mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs); + desc_handle_irq(IRQ_S3C2440_CAM_C, mydesc, regs); } if (subsrc & 2) { mydesc = irq_desc + IRQ_S3C2440_CAM_P; - mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs); + desc_handle_irq(IRQ_S3C2440_CAM_P, mydesc, regs); } } } diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c index 765a3a9ae032..c0acfb2ad790 100644 --- a/arch/arm/mach-s3c2410/time.c +++ b/arch/arm/mach-s3c2410/time.c @@ -164,7 +164,7 @@ static void s3c2410_timer_setup (void) /* configure the system for whichever machine is in use */ - if (machine_is_bast() || machine_is_vr1000()) { + if (machine_is_bast() || machine_is_vr1000() || machine_is_anubis()) { /* timer is at 12MHz, scaler is 1 */ timer_usec_ticks = timer_mask_usec_ticks(1, 12000000); tcnt = 12000000 / HZ; diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 4d4d303ee3a8..24687f511bf5 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -35,6 +35,7 @@ #include <asm/mach/map.h> #include <asm/mach/serial_sa1100.h> #include <asm/arch/assabet.h> +#include <asm/arch/mcp.h> #include "generic.h" @@ -198,6 +199,11 @@ static struct irda_platform_data assabet_irda_data = { .set_speed = assabet_irda_set_speed, }; +static struct mcp_plat_data assabet_mcp_data = { + .mccr0 = MCCR0_ADM, + .sclk_rate = 11981000, +}; + static void __init assabet_init(void) { /* @@ -246,6 +252,7 @@ static void __init assabet_init(void) sa11x0_set_flash_data(&assabet_flash_data, assabet_flash_resources, ARRAY_SIZE(assabet_flash_resources)); sa11x0_set_irda_data(&assabet_irda_data); + sa11x0_set_mcp_data(&assabet_mcp_data); } /* diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index 0aa918e24c31..9484be7dc671 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -29,6 +29,7 @@ #include <asm/mach/serial_sa1100.h> #include <asm/arch/cerf.h> +#include <asm/arch/mcp.h> #include "generic.h" static struct resource cerfuart2_resources[] = { @@ -116,10 +117,16 @@ static void __init cerf_map_io(void) GPDR |= CERF_GPIO_CF_RESET; } +static struct mcp_plat_data cerf_mcp_data = { + .mccr0 = MCCR0_ADM, + .sclk_rate = 11981000, +}; + static void __init cerf_init(void) { platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices)); sa11x0_set_flash_data(&cerf_flash_data, &cerf_flash_resource, 1); + sa11x0_set_mcp_data(&cerf_mcp_data); } MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube") diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 95ae217be1bc..3f1e358455e5 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -221,6 +221,11 @@ static struct platform_device sa11x0mcp_device = { .resource = sa11x0mcp_resources, }; +void sa11x0_set_mcp_data(struct mcp_plat_data *data) +{ + sa11x0mcp_device.dev.platform_data = data; +} + static struct resource sa11x0ssp_resources[] = { [0] = { .start = 0x80070000, diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index bfe41da9923e..279e3afa3c39 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -34,5 +34,8 @@ struct resource; extern void sa11x0_set_flash_data(struct flash_platform_data *flash, struct resource *res, int nr); +struct sa11x0_ssp_plat_ops; +extern void sa11x0_set_ssp_data(struct sa11x0_ssp_plat_ops *ops); + struct irda_platform_data; void sa11x0_set_irda_data(struct irda_platform_data *irda); diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index 66a929cb7bc5..c131a5201b5b 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -98,8 +98,8 @@ static struct irqchip sa1100_low_gpio_chip = { .ack = sa1100_low_gpio_ack, .mask = sa1100_low_gpio_mask, .unmask = sa1100_low_gpio_unmask, - .type = sa1100_gpio_type, - .wake = sa1100_low_gpio_wake, + .set_type = sa1100_gpio_type, + .set_wake = sa1100_low_gpio_wake, }; /* @@ -126,7 +126,7 @@ sa1100_high_gpio_handler(unsigned int irq, struct irqdesc *desc, mask >>= 11; do { if (mask & 1) - desc->handle(irq, desc, regs); + desc_handle_irq(irq, desc, regs); mask >>= 1; irq++; desc++; @@ -181,8 +181,8 @@ static struct irqchip sa1100_high_gpio_chip = { .ack = sa1100_high_gpio_ack, .mask = sa1100_high_gpio_mask, .unmask = sa1100_high_gpio_unmask, - .type = sa1100_gpio_type, - .wake = sa1100_high_gpio_wake, + .set_type = sa1100_gpio_type, + .set_wake = sa1100_high_gpio_wake, }; /* diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 870b488aeda4..ed6744d480af 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -13,12 +13,23 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/serial_sa1100.h> +#include <asm/arch/mcp.h> #include "generic.h" #warning "include/asm/arch-sa1100/ide.h needs fixing for lart" +static struct mcp_plat_data lart_mcp_data = { + .mccr0 = MCCR0_ADM, + .sclk_rate = 11981000, +}; + +static void __init lart_init(void) +{ + sa11x0_set_mcp_data(&lart_mcp_data); +} + static struct map_desc lart_io_desc[] __initdata = { /* virtual physical length type */ { 0xe8000000, 0x00000000, 0x00400000, MT_DEVICE }, /* main flash memory */ @@ -47,5 +58,6 @@ MACHINE_START(LART, "LART") .boot_params = 0xc0000100, .map_io = lart_map_io, .init_irq = sa1100_init_irq, + .init_machine = lart_init, .timer = &sa1100_timer, MACHINE_END diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 1405383463ea..fc061641b7be 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -61,12 +61,12 @@ neponset_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *reg if (irr & IRR_ETHERNET) { d = irq_desc + IRQ_NEPONSET_SMC9196; - d->handle(IRQ_NEPONSET_SMC9196, d, regs); + desc_handle_irq(IRQ_NEPONSET_SMC9196, d, regs); } if (irr & IRR_USAR) { d = irq_desc + IRQ_NEPONSET_USAR; - d->handle(IRQ_NEPONSET_USAR, d, regs); + desc_handle_irq(IRQ_NEPONSET_USAR, d, regs); } desc->chip->unmask(irq); @@ -74,7 +74,7 @@ neponset_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *reg if (irr & IRR_SA1111) { d = irq_desc + IRQ_NEPONSET_SA1111; - d->handle(IRQ_NEPONSET_SA1111, d, regs); + desc_handle_irq(IRQ_NEPONSET_SA1111, d, regs); } } } diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index 43a00359fcdd..7482288278d9 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -18,6 +18,7 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> #include <asm/mach/serial_sa1100.h> +#include <asm/arch/mcp.h> #include <asm/arch/shannon.h> #include "generic.h" @@ -52,9 +53,15 @@ static struct resource shannon_flash_resource = { .flags = IORESOURCE_MEM, }; +static struct mcp_plat_data shannon_mcp_data = { + .mccr0 = MCCR0_ADM, + .sclk_rate = 11981000, +}; + static void __init shannon_init(void) { sa11x0_set_flash_data(&shannon_flash_data, &shannon_flash_resource, 1); + sa11x0_set_mcp_data(&shannon_mcp_data); } static void __init shannon_map_io(void) diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 77978586b126..07f6d5fd7bb0 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -23,6 +23,7 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> #include <asm/mach/serial_sa1100.h> +#include <asm/arch/mcp.h> #include <asm/arch/simpad.h> #include <linux/serial_core.h> @@ -123,6 +124,11 @@ static struct resource simpad_flash_resources [] = { } }; +static struct mcp_plat_data simpad_mcp_data = { + .mccr0 = MCCR0_ADM, + .sclk_rate = 11981000, +}; + static void __init simpad_map_io(void) @@ -157,6 +163,7 @@ static void __init simpad_map_io(void) sa11x0_set_flash_data(&simpad_flash_data, simpad_flash_resources, ARRAY_SIZE(simpad_flash_resources)); + sa11x0_set_mcp_data(&simpad_mcp_data); } static void simpad_power_off(void) diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 0eeb3616ffea..47e0420623fc 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -70,15 +70,11 @@ static unsigned long sa1100_gettimeoffset (void) return usec; } -/* - * We will be entered with IRQs enabled. - * - * Loop until we get ahead of the free running timer. - * This ensures an exact clock tick count and time accuracy. - * IRQs are disabled inside the loop to ensure coherence between - * lost_ticks (updated in do_timer()) and the match reg value, so we - * can use do_gettimeofday() from interrupt handlers. - */ +#ifdef CONFIG_NO_IDLE_HZ +static unsigned long initial_match; +static int match_posponed; +#endif + static irqreturn_t sa1100_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { @@ -86,6 +82,21 @@ sa1100_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) write_seqlock(&xtime_lock); +#ifdef CONFIG_NO_IDLE_HZ + if (match_posponed) { + match_posponed = 0; + OSMR0 = initial_match; + } +#endif + + /* + * Loop until we get ahead of the free running timer. + * This ensures an exact clock tick count and time accuracy. + * Since IRQs are disabled at this point, coherence between + * lost_ticks(updated in do_timer()) and the match reg value is + * ensured, hence we can use do_gettimeofday() from interrupt + * handlers. + */ do { timer_tick(regs); OSSR = OSSR_M0; /* Clear match on timer 0 */ @@ -120,6 +131,42 @@ static void __init sa1100_timer_init(void) OSCR = 0; /* initialize free-running timer, force first match */ } +#ifdef CONFIG_NO_IDLE_HZ +static int sa1100_dyn_tick_enable_disable(void) +{ + /* nothing to do */ + return 0; +} + +static void sa1100_dyn_tick_reprogram(unsigned long ticks) +{ + if (ticks > 1) { + initial_match = OSMR0; + OSMR0 = initial_match + ticks * LATCH; + match_posponed = 1; + } +} + +static irqreturn_t +sa1100_dyn_tick_handler(int irq, void *dev_id, struct pt_regs *regs) +{ + if (match_posponed) { + match_posponed = 0; + OSMR0 = initial_match; + if ((signed long)(initial_match - OSCR) <= 0) + return sa1100_timer_interrupt(irq, dev_id, regs); + } + return IRQ_NONE; +} + +static struct dyn_tick_timer sa1100_dyn_tick = { + .enable = sa1100_dyn_tick_enable_disable, + .disable = sa1100_dyn_tick_enable_disable, + .reprogram = sa1100_dyn_tick_reprogram, + .handler = sa1100_dyn_tick_handler, +}; +#endif + #ifdef CONFIG_PM unsigned long osmr[4], oier; @@ -156,4 +203,7 @@ struct sys_timer sa1100_timer = { .suspend = sa1100_timer_suspend, .resume = sa1100_timer_resume, .offset = sa1100_gettimeoffset, +#ifdef CONFIG_NO_IDLE_HZ + .dyn_tick = &sa1100_dyn_tick, +#endif }; diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index e737eae4521f..946c0d11c73b 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -41,7 +41,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index f01c0f8a2bb3..3c8862fde51a 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -108,7 +108,7 @@ sic_handle_irq(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) irq += IRQ_SIC_START; desc = irq_desc + irq; - desc->handle(irq, desc, regs); + desc_handle_irq(irq, desc, regs); } while (status); } diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 81f4a8a2d34b..4b39d867ac14 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -45,7 +45,7 @@ #define LDST_P_EQ_U(i) ((((i) ^ ((i) >> 1)) & (1 << 23)) == 0) -#define LDSTH_I_BIT(i) (i & (1 << 22)) /* half-word immed */ +#define LDSTHD_I_BIT(i) (i & (1 << 22)) /* double/half-word immed */ #define LDM_S_BIT(i) (i & (1 << 22)) /* write CPSR from SPSR */ #define RN_BITS(i) ((i >> 16) & 15) /* Rn */ @@ -68,6 +68,7 @@ static unsigned long ai_sys; static unsigned long ai_skipped; static unsigned long ai_half; static unsigned long ai_word; +static unsigned long ai_dword; static unsigned long ai_multi; static int ai_usermode; @@ -93,6 +94,8 @@ proc_alignment_read(char *page, char **start, off_t off, int count, int *eof, p += sprintf(p, "Skipped:\t%lu\n", ai_skipped); p += sprintf(p, "Half:\t\t%lu\n", ai_half); p += sprintf(p, "Word:\t\t%lu\n", ai_word); + if (cpu_architecture() >= CPU_ARCH_ARMv5TE) + p += sprintf(p, "DWord:\t\t%lu\n", ai_dword); p += sprintf(p, "Multi:\t\t%lu\n", ai_multi); p += sprintf(p, "User faults:\t%i (%s)\n", ai_usermode, usermode_action[ai_usermode]); @@ -283,12 +286,6 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r { unsigned int rd = RD_BITS(instr); - if ((instr & 0x01f00ff0) == 0x01000090) - goto swp; - - if ((instr & 0x90) != 0x90 || (instr & 0x60) == 0) - goto bad; - ai_half += 1; if (user_mode(regs)) @@ -323,10 +320,47 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r return TYPE_LDST; - swp: - printk(KERN_ERR "Alignment trap: not handling swp instruction\n"); - bad: - return TYPE_ERROR; + fault: + return TYPE_FAULT; +} + +static int +do_alignment_ldrdstrd(unsigned long addr, unsigned long instr, + struct pt_regs *regs) +{ + unsigned int rd = RD_BITS(instr); + + ai_dword += 1; + + if (user_mode(regs)) + goto user; + + if ((instr & 0xf0) == 0xd0) { + unsigned long val; + get32_unaligned_check(val, addr); + regs->uregs[rd] = val; + get32_unaligned_check(val, addr+4); + regs->uregs[rd+1] = val; + } else { + put32_unaligned_check(regs->uregs[rd], addr); + put32_unaligned_check(regs->uregs[rd+1], addr+4); + } + + return TYPE_LDST; + + user: + if ((instr & 0xf0) == 0xd0) { + unsigned long val; + get32t_unaligned_check(val, addr); + regs->uregs[rd] = val; + get32t_unaligned_check(val, addr+4); + regs->uregs[rd+1] = val; + } else { + put32t_unaligned_check(regs->uregs[rd], addr); + put32t_unaligned_check(regs->uregs[rd+1], addr+4); + } + + return TYPE_LDST; fault: return TYPE_FAULT; @@ -617,12 +651,20 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) regs->ARM_pc += thumb_mode(regs) ? 2 : 4; switch (CODING_BITS(instr)) { - case 0x00000000: /* ldrh or strh */ - if (LDSTH_I_BIT(instr)) + case 0x00000000: /* 3.13.4 load/store instruction extensions */ + if (LDSTHD_I_BIT(instr)) offset.un = (instr & 0xf00) >> 4 | (instr & 15); else offset.un = regs->uregs[RM_BITS(instr)]; - handler = do_alignment_ldrhstrh; + + if ((instr & 0x000000f0) == 0x000000b0 || /* LDRH, STRH */ + (instr & 0x001000f0) == 0x001000f0) /* LDRSH */ + handler = do_alignment_ldrhstrh; + else if ((instr & 0x001000f0) == 0x000000d0 || /* LDRD */ + (instr & 0x001000f0) == 0x000000f0) /* STRD */ + handler = do_alignment_ldrdstrd; + else + goto bad; break; case 0x04000000: /* ldr or str immediate */ diff --git a/arch/arm/mm/copypage-v3.S b/arch/arm/mm/copypage-v3.S index 4940f1908316..3c58ebbf0359 100644 --- a/arch/arm/mm/copypage-v3.S +++ b/arch/arm/mm/copypage-v3.S @@ -12,7 +12,7 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> .text .align 5 diff --git a/arch/arm/mm/copypage-v4wb.S b/arch/arm/mm/copypage-v4wb.S index b94c345ceb94..83117354b1cd 100644 --- a/arch/arm/mm/copypage-v4wb.S +++ b/arch/arm/mm/copypage-v4wb.S @@ -11,7 +11,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> .text .align 5 diff --git a/arch/arm/mm/copypage-v4wt.S b/arch/arm/mm/copypage-v4wt.S index 976793937a93..e1f2af28d549 100644 --- a/arch/arm/mm/copypage-v4wt.S +++ b/arch/arm/mm/copypage-v4wt.S @@ -14,7 +14,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> .text .align 5 diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 191788fb18d1..b0208c992576 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -16,6 +16,58 @@ #include <asm/tlbflush.h> #ifdef CONFIG_CPU_CACHE_VIPT + +void flush_cache_mm(struct mm_struct *mm) +{ + if (cache_is_vivt()) { + if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) + __cpuc_flush_user_all(); + return; + } + + if (cache_is_vipt_aliasing()) { + asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c5, 0\n" + " mcr p15, 0, %0, c7, c10, 4" + : + : "r" (0) + : "cc"); + } +} + +void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) +{ + if (cache_is_vivt()) { + if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) + __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end), + vma->vm_flags); + return; + } + + if (cache_is_vipt_aliasing()) { + asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c5, 0\n" + " mcr p15, 0, %0, c7, c10, 4" + : + : "r" (0) + : "cc"); + } +} + +void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn) +{ + if (cache_is_vivt()) { + if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) { + unsigned long addr = user_addr & PAGE_MASK; + __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags); + } + return; + } + + if (cache_is_vipt_aliasing()) + flush_pfn_alias(pfn, user_addr); +} + #define ALIAS_FLUSH_START 0xffff4000 #define TOP_PTE(x) pte_offset_kernel(top_pmd, x) diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index 3c655c54e231..d125a3dc061c 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -275,11 +275,9 @@ alloc_init_supersection(unsigned long virt, unsigned long phys, int prot) int i; for (i = 0; i < 16; i += 1) { - alloc_init_section(virt, phys & SUPERSECTION_MASK, - prot | PMD_SECT_SUPER); + alloc_init_section(virt, phys, prot | PMD_SECT_SUPER); virt += (PGDIR_SIZE / 2); - phys += (PGDIR_SIZE / 2); } } @@ -297,14 +295,10 @@ alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pg pte_t *ptep; if (pmd_none(*pmdp)) { - unsigned long pmdval; ptep = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t)); - pmdval = __pa(ptep) | prot_l1; - pmdp[0] = __pmd(pmdval); - pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t)); - flush_pmd_entry(pmdp); + __pmd_populate(pmdp, __pa(ptep) | prot_l1); } ptep = pte_offset_kernel(pmdp, virt); @@ -459,7 +453,7 @@ static void __init build_mem_type_table(void) for (i = 0; i < 16; i++) { unsigned long v = pgprot_val(protection_map[i]); - v &= (~(PTE_BUFFERABLE|PTE_CACHEABLE)) | user_pgprot; + v = (v & ~(PTE_BUFFERABLE|PTE_CACHEABLE)) | user_pgprot; protection_map[i] = __pgprot(v); } @@ -583,23 +577,23 @@ static void __init create_mapping(struct map_desc *md) */ void setup_mm_for_reboot(char mode) { - unsigned long pmdval; + unsigned long base_pmdval; pgd_t *pgd; - pmd_t *pmd; int i; - int cpu_arch = cpu_architecture(); if (current->mm && current->mm->pgd) pgd = current->mm->pgd; else pgd = init_mm.pgd; - for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++) { - pmdval = (i << PGDIR_SHIFT) | - PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | - PMD_TYPE_SECT; - if (cpu_arch <= CPU_ARCH_ARMv5TEJ) - pmdval |= PMD_BIT4; + base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT; + if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ) + base_pmdval |= PMD_BIT4; + + for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) { + unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval; + pmd_t *pmd; + pmd = pmd_off(pgd, i << PGDIR_SHIFT); pmd[0] = __pmd(pmdval); pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1))); diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 5c0ae5260d1c..1d739d282a45 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -28,7 +28,7 @@ #include <linux/config.h> #include <linux/init.h> #include <asm/assembler.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/ptrace.h> diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index d69389c4d4ba..9b725665b5c7 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -28,7 +28,7 @@ #include <linux/config.h> #include <linux/init.h> #include <asm/assembler.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/ptrace.h> diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 747ed963e1df..37b70fa21c76 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -17,7 +17,7 @@ #include <linux/config.h> #include <linux/init.h> #include <asm/assembler.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/ptrace.h> diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 248110c9cf13..931b690d1be2 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -17,7 +17,7 @@ #include <linux/config.h> #include <linux/init.h> #include <asm/assembler.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/ptrace.h> diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 0ee214b824ff..d0f1bbb48f6c 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -13,7 +13,7 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/ptrace.h> @@ -38,8 +38,8 @@ ENTRY(cpu_arm7_data_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR ldr r8, [r0] @ read arm instruction - tst r8, #1 << 20 @ L = 1 -> write? - orreq r1, r1, #1 << 8 @ yes. + tst r8, #1 << 20 @ L = 0 -> write? + orreq r1, r1, #1 << 11 @ yes. and r7, r8, #15 << 24 add pc, pc, r7, lsr #22 @ Now branch to the relevant processing routine nop @@ -71,8 +71,8 @@ ENTRY(cpu_arm6_data_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR ldr r8, [r2] @ read arm instruction - tst r8, #1 << 20 @ L = 1 -> write? - orreq r1, r1, #1 << 8 @ yes. + tst r8, #1 << 20 @ L = 0 -> write? + orreq r1, r1, #1 << 11 @ yes. and r7, r8, #14 << 24 teq r7, #8 << 24 @ was it ldm/stm movne pc, lr diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 57cfa6a2f54f..c69c9de32391 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -33,7 +33,7 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/pgtable.h> #include <asm/procinfo.h> #include <asm/ptrace.h> diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index 9137fe563599..7cfc2604a1ee 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -4,7 +4,7 @@ * VMA_VM_FLAGS * VM_EXEC */ -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/thread_info.h> /* diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 360cae905692..34f7e7d3f419 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -15,7 +15,7 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/procinfo.h> #include <asm/hardware.h> #include <asm/pgtable.h> diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index d447cd5f3dd9..ca14f80d5ab4 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -20,7 +20,7 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/procinfo.h> #include <asm/hardware.h> #include <asm/pgtable.h> diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 139a38670c5d..eb34823c9dbf 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -11,7 +11,7 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/procinfo.h> #include <asm/pgtable.h> diff --git a/arch/arm/mm/tlb-v3.S b/arch/arm/mm/tlb-v3.S index 44b0daeaff9b..c10786ec8e0a 100644 --- a/arch/arm/mm/tlb-v3.S +++ b/arch/arm/mm/tlb-v3.S @@ -13,7 +13,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/tlbflush.h> #include "proc-macros.S" diff --git a/arch/arm/mm/tlb-v4.S b/arch/arm/mm/tlb-v4.S index db82ee468248..d6c94457c2b9 100644 --- a/arch/arm/mm/tlb-v4.S +++ b/arch/arm/mm/tlb-v4.S @@ -14,7 +14,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/tlbflush.h> #include "proc-macros.S" diff --git a/arch/arm/mm/tlb-v4wb.S b/arch/arm/mm/tlb-v4wb.S index 7908d5f1f130..cb829ca7845d 100644 --- a/arch/arm/mm/tlb-v4wb.S +++ b/arch/arm/mm/tlb-v4wb.S @@ -14,7 +14,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/tlbflush.h> #include "proc-macros.S" diff --git a/arch/arm/mm/tlb-v4wbi.S b/arch/arm/mm/tlb-v4wbi.S index efbe94bbe1a7..60cfc4a25dd5 100644 --- a/arch/arm/mm/tlb-v4wbi.S +++ b/arch/arm/mm/tlb-v4wbi.S @@ -14,7 +14,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/tlbflush.h> #include "proc-macros.S" diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S index 99ed26e78adf..6f76b89ef46e 100644 --- a/arch/arm/mm/tlb-v6.S +++ b/arch/arm/mm/tlb-v6.S @@ -11,7 +11,7 @@ * These assume a split I/D TLB. */ #include <linux/linkage.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/page.h> #include <asm/tlbflush.h> #include "proc-macros.S" diff --git a/arch/arm/nwfpe/entry26.S b/arch/arm/nwfpe/entry26.S index 0ed38b0913db..51940a96d6a6 100644 --- a/arch/arm/nwfpe/entry26.S +++ b/arch/arm/nwfpe/entry26.S @@ -20,7 +20,7 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <asm/constants.h> +#include <asm/asm-offsets.h> /* This is the kernel's entry point into the floating point emulator. It is called from the kernel with code similar to this: diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 345365852f8c..9693e9b4ffd1 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -91,6 +91,13 @@ config OMAP_32K_TIMER_HZ Kernel internal timer frequency should be a divisor of 32768, such as 64 or 128. +config OMAP_DM_TIMER + bool "Use dual-mode timer" + default n + depends on ARCH_OMAP16XX + help + Select this option if you want to use OMAP Dual-Mode timers. + choice prompt "Low-level debug console UART" depends on ARCH_OMAP @@ -107,6 +114,15 @@ config OMAP_LL_DEBUG_UART3 endchoice +config OMAP_SERIAL_WAKE + bool "Enable wake-up events for serial ports" + depends OMAP_MUX + default y + help + Select this option if you want to have your system wake up + to data on the serial RX line. This allows you to wake the + system from serial console. + endmenu endif diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 531e11af54d4..7e144f9cad1c 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := common.o dma.o clock.o mux.o gpio.o mcbsp.o usb.o +obj-y := common.o sram.o sram-fn.o clock.o dma.o mux.o gpio.o mcbsp.o usb.o obj-m := obj-n := obj- := @@ -15,3 +15,5 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_CPU_FREQ) += cpu-omap.o +obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o + diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 59d91b3262ba..52a58b2da288 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -21,6 +21,7 @@ #include <asm/arch/usb.h> #include "clock.h" +#include "sram.h" static LIST_HEAD(clocks); static DECLARE_MUTEX(clocks_sem); @@ -141,7 +142,7 @@ static struct clk arm_ck = { static struct clk armper_ck = { .name = "armper_ck", .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP730 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | RATE_CKCTL, .enable_reg = ARM_IDLECT2, .enable_bit = EN_PERCK, @@ -385,7 +386,8 @@ static struct clk uart2_ck = { .name = "uart2_ck", /* Direct from ULPD, no parent */ .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT | + ALWAYS_ENABLED, .enable_reg = MOD_CONF_CTRL_0, .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ .set_rate = &set_uart_rate, @@ -443,6 +445,15 @@ static struct clk usb_hhc_ck16xx = { .enable_bit = 8 /* UHOST_EN */, }; +static struct clk usb_dc_ck = { + .name = "usb_dc_ck", + /* Direct from ULPD, no parent */ + .rate = 48000000, + .flags = CLOCK_IN_OMAP16XX | RATE_FIXED, + .enable_reg = SOFT_REQ_REG, + .enable_bit = 4, +}; + static struct clk mclk_1510 = { .name = "mclk", /* Direct from ULPD, no parent. May be enabled by ext hardware. */ @@ -552,6 +563,7 @@ static struct clk * onchip_clks[] = { &uart3_16xx, &usb_clko, &usb_hhc_ck1510, &usb_hhc_ck16xx, + &usb_dc_ck, &mclk_1510, &mclk_16xx, &bclk_1510, &bclk_16xx, &mmc1_ck, @@ -946,14 +958,13 @@ static int select_table_rate(struct clk * clk, unsigned long rate) if (!ptr->rate) return -EINVAL; - if (!ptr->rate) - return -EINVAL; + /* + * In most cases we should not need to reprogram DPLL. + * Reprogramming the DPLL is tricky, it must be done from SRAM. + */ + omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); - if (unlikely(ck_dpll1.rate == 0)) { - omap_writew(ptr->dpllctl_val, DPLL_CTL); - ck_dpll1.rate = ptr->pll_rate; - } - omap_writew(ptr->ckctl_val, ARM_CKCTL); + ck_dpll1.rate = ptr->pll_rate; propagate_rate(&ck_dpll1); return 0; } @@ -1224,9 +1235,11 @@ int __init clk_init(void) #endif /* Cache rates for clocks connected to ck_ref (not dpll1) */ propagate_rate(&ck_ref); - printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld/%ld MHz\n", + printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " + "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, - ck_dpll1.rate, arm_ck.rate); + ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, + arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); #ifdef CONFIG_MACH_OMAP_PERSEUS2 /* Select slicer output as OMAP input clock */ @@ -1271,7 +1284,9 @@ static int __init omap_late_clk_reset(void) struct clk *p; __u32 regval32; - omap_writew(0, SOFT_REQ_REG); + /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ + regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4); + omap_writew(regval32, SOFT_REQ_REG); omap_writew(0, SOFT_REQ_REG2); list_for_each_entry(p, &clocks, node) { diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index ea967a8f6ce5..6cb20aea7f51 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -26,6 +26,7 @@ #include <asm/hardware/clock.h> #include <asm/io.h> #include <asm/mach-types.h> +#include <asm/setup.h> #include <asm/arch/board.h> #include <asm/arch/mux.h> @@ -35,11 +36,11 @@ #define NO_LENGTH_CHECK 0xffffffff -extern int omap_bootloader_tag_len; -extern u8 omap_bootloader_tag[]; +unsigned char omap_bootloader_tag[512]; +int omap_bootloader_tag_len; struct omap_board_config_kernel *omap_board_config; -int omap_board_config_size = 0; +int omap_board_config_size; static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out) { diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index c0a5c2fa42bd..da7b65145658 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -425,7 +425,7 @@ static int dma_handle_ch(int ch) dma_chan[ch + 6].saved_csr = csr >> 7; csr &= 0x7f; } - if (!csr) + if ((csr & 0x3f) == 0) return 0; if (unlikely(dma_chan[ch].dev_id == -1)) { printk(KERN_WARNING "Spurious interrupt from DMA channel %d (CSR %04x)\n", @@ -890,11 +890,11 @@ void omap_enable_lcd_dma(void) w |= 1 << 8; omap_writew(w, OMAP1610_DMA_LCD_CTRL); + lcd_dma.active = 1; + w = omap_readw(OMAP1610_DMA_LCD_CCR); w |= 1 << 7; omap_writew(w, OMAP1610_DMA_LCD_CCR); - - lcd_dma.active = 1; } void omap_setup_lcd_dma(void) @@ -965,8 +965,8 @@ void omap_clear_dma(int lch) */ dma_addr_t omap_get_dma_src_pos(int lch) { - return (dma_addr_t) (OMAP_DMA_CSSA_L(lch) | - (OMAP_DMA_CSSA_U(lch) << 16)); + return (dma_addr_t) (omap_readw(OMAP_DMA_CSSA_L(lch)) | + (omap_readw(OMAP_DMA_CSSA_U(lch)) << 16)); } /* @@ -979,8 +979,18 @@ dma_addr_t omap_get_dma_src_pos(int lch) */ dma_addr_t omap_get_dma_dst_pos(int lch) { - return (dma_addr_t) (OMAP_DMA_CDSA_L(lch) | - (OMAP_DMA_CDSA_U(lch) << 16)); + return (dma_addr_t) (omap_readw(OMAP_DMA_CDSA_L(lch)) | + (omap_readw(OMAP_DMA_CDSA_U(lch)) << 16)); +} + +/* + * Returns current source transfer counting for the given DMA channel. + * Can be used to monitor the progress of a transfer inside a block. + * It must be called with disabled interrupts. + */ +int omap_get_dma_src_addr_counter(int lch) +{ + return (dma_addr_t) omap_readw(OMAP_DMA_CSAC(lch)); } int omap_dma_running(void) @@ -1076,6 +1086,7 @@ arch_initcall(omap_init_dma); EXPORT_SYMBOL(omap_get_dma_src_pos); EXPORT_SYMBOL(omap_get_dma_dst_pos); +EXPORT_SYMBOL(omap_get_dma_src_addr_counter); EXPORT_SYMBOL(omap_clear_dma); EXPORT_SYMBOL(omap_set_dma_priority); EXPORT_SYMBOL(omap_request_dma); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c new file mode 100644 index 000000000000..a1468d7326eb --- /dev/null +++ b/arch/arm/plat-omap/dmtimer.c @@ -0,0 +1,260 @@ +/* + * linux/arch/arm/plat-omap/dmtimer.c + * + * OMAP Dual-Mode Timers + * + * Copyright (C) 2005 Nokia Corporation + * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <asm/arch/hardware.h> +#include <asm/arch/dmtimer.h> +#include <asm/io.h> +#include <asm/arch/irqs.h> +#include <linux/spinlock.h> +#include <linux/list.h> + +#define OMAP_TIMER_COUNT 8 + +#define OMAP_TIMER_ID_REG 0x00 +#define OMAP_TIMER_OCP_CFG_REG 0x10 +#define OMAP_TIMER_SYS_STAT_REG 0x14 +#define OMAP_TIMER_STAT_REG 0x18 +#define OMAP_TIMER_INT_EN_REG 0x1c +#define OMAP_TIMER_WAKEUP_EN_REG 0x20 +#define OMAP_TIMER_CTRL_REG 0x24 +#define OMAP_TIMER_COUNTER_REG 0x28 +#define OMAP_TIMER_LOAD_REG 0x2c +#define OMAP_TIMER_TRIGGER_REG 0x30 +#define OMAP_TIMER_WRITE_PEND_REG 0x34 +#define OMAP_TIMER_MATCH_REG 0x38 +#define OMAP_TIMER_CAPTURE_REG 0x3c +#define OMAP_TIMER_IF_CTRL_REG 0x40 + + +static struct dmtimer_info_struct { + struct list_head unused_timers; + struct list_head reserved_timers; +} dm_timer_info; + +static struct omap_dm_timer dm_timers[] = { + { .base=0xfffb1400, .irq=INT_1610_GPTIMER1 }, + { .base=0xfffb1c00, .irq=INT_1610_GPTIMER2 }, + { .base=0xfffb2400, .irq=INT_1610_GPTIMER3 }, + { .base=0xfffb2c00, .irq=INT_1610_GPTIMER4 }, + { .base=0xfffb3400, .irq=INT_1610_GPTIMER5 }, + { .base=0xfffb3c00, .irq=INT_1610_GPTIMER6 }, + { .base=0xfffb4400, .irq=INT_1610_GPTIMER7 }, + { .base=0xfffb4c00, .irq=INT_1610_GPTIMER8 }, + { .base=0x0 }, +}; + + +static spinlock_t dm_timer_lock; + + +inline void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value) +{ + omap_writel(value, timer->base + reg); + while (omap_dm_timer_read_reg(timer, OMAP_TIMER_WRITE_PEND_REG)) + ; +} + +u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg) +{ + return omap_readl(timer->base + reg); +} + +int omap_dm_timers_active(void) +{ + struct omap_dm_timer *timer; + + for (timer = &dm_timers[0]; timer->base; ++timer) + if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) & + OMAP_TIMER_CTRL_ST) + return 1; + + return 0; +} + + +void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +{ + int n = (timer - dm_timers) << 1; + u32 l; + + l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); + l |= source << n; + omap_writel(l, MOD_CONF_CTRL_1); +} + + +static void omap_dm_timer_reset(struct omap_dm_timer *timer) +{ + /* Reset and set posted mode */ + omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06); + omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, 0x02); + + omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_ARMXOR); +} + + + +struct omap_dm_timer * omap_dm_timer_request(void) +{ + struct omap_dm_timer *timer = NULL; + unsigned long flags; + + spin_lock_irqsave(&dm_timer_lock, flags); + if (!list_empty(&dm_timer_info.unused_timers)) { + timer = (struct omap_dm_timer *) + dm_timer_info.unused_timers.next; + list_move_tail((struct list_head *)timer, + &dm_timer_info.reserved_timers); + } + spin_unlock_irqrestore(&dm_timer_lock, flags); + + return timer; +} + + +void omap_dm_timer_free(struct omap_dm_timer *timer) +{ + unsigned long flags; + + omap_dm_timer_reset(timer); + + spin_lock_irqsave(&dm_timer_lock, flags); + list_move_tail((struct list_head *)timer, &dm_timer_info.unused_timers); + spin_unlock_irqrestore(&dm_timer_lock, flags); +} + +void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, + unsigned int value) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value); +} + +unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer) +{ + return omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG); +} + +void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value); +} + +void omap_dm_timer_enable_autoreload(struct omap_dm_timer *timer) +{ + u32 l; + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l |= OMAP_TIMER_CTRL_AR; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + +void omap_dm_timer_trigger(struct omap_dm_timer *timer) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 1); +} + +void omap_dm_timer_set_trigger(struct omap_dm_timer *timer, unsigned int value) +{ + u32 l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l |= value & 0x3; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + +void omap_dm_timer_start(struct omap_dm_timer *timer) +{ + u32 l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l |= OMAP_TIMER_CTRL_ST; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + +void omap_dm_timer_stop(struct omap_dm_timer *timer) +{ + u32 l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l &= ~0x1; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + +unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer) +{ + return omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG); +} + +void omap_dm_timer_reset_counter(struct omap_dm_timer *timer) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, 0); +} + +void omap_dm_timer_set_load(struct omap_dm_timer *timer, unsigned int load) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load); +} + +void omap_dm_timer_set_match(struct omap_dm_timer *timer, unsigned int match) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match); +} + +void omap_dm_timer_enable_compare(struct omap_dm_timer *timer) +{ + u32 l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l |= OMAP_TIMER_CTRL_CE; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + + +static inline void __dm_timer_init(void) +{ + struct omap_dm_timer *timer; + + spin_lock_init(&dm_timer_lock); + INIT_LIST_HEAD(&dm_timer_info.unused_timers); + INIT_LIST_HEAD(&dm_timer_info.reserved_timers); + + timer = &dm_timers[0]; + while (timer->base) { + list_add_tail((struct list_head *)timer, &dm_timer_info.unused_timers); + omap_dm_timer_reset(timer); + timer++; + } +} + +static int __init omap_dm_timer_init(void) +{ + if (cpu_is_omap16xx()) + __dm_timer_init(); + return 0; +} + +arch_initcall(omap_dm_timer_init); diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 1c85b4e536c2..55059a24ad41 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -3,7 +3,7 @@ * * Support functions for OMAP GPIO * - * Copyright (C) 2003 Nokia Corporation + * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> * * This program is free software; you can redistribute it and/or modify @@ -17,8 +17,11 @@ #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/ptrace.h> +#include <linux/sysdev.h> +#include <linux/err.h> #include <asm/hardware.h> +#include <asm/hardware/clock.h> #include <asm/irq.h> #include <asm/arch/irqs.h> #include <asm/arch/gpio.h> @@ -29,7 +32,7 @@ /* * OMAP1510 GPIO registers */ -#define OMAP1510_GPIO_BASE 0xfffce000 +#define OMAP1510_GPIO_BASE (void __iomem *)0xfffce000 #define OMAP1510_GPIO_DATA_INPUT 0x00 #define OMAP1510_GPIO_DATA_OUTPUT 0x04 #define OMAP1510_GPIO_DIR_CONTROL 0x08 @@ -43,34 +46,37 @@ /* * OMAP1610 specific GPIO registers */ -#define OMAP1610_GPIO1_BASE 0xfffbe400 -#define OMAP1610_GPIO2_BASE 0xfffbec00 -#define OMAP1610_GPIO3_BASE 0xfffbb400 -#define OMAP1610_GPIO4_BASE 0xfffbbc00 +#define OMAP1610_GPIO1_BASE (void __iomem *)0xfffbe400 +#define OMAP1610_GPIO2_BASE (void __iomem *)0xfffbec00 +#define OMAP1610_GPIO3_BASE (void __iomem *)0xfffbb400 +#define OMAP1610_GPIO4_BASE (void __iomem *)0xfffbbc00 #define OMAP1610_GPIO_REVISION 0x0000 #define OMAP1610_GPIO_SYSCONFIG 0x0010 #define OMAP1610_GPIO_SYSSTATUS 0x0014 #define OMAP1610_GPIO_IRQSTATUS1 0x0018 #define OMAP1610_GPIO_IRQENABLE1 0x001c +#define OMAP1610_GPIO_WAKEUPENABLE 0x0028 #define OMAP1610_GPIO_DATAIN 0x002c #define OMAP1610_GPIO_DATAOUT 0x0030 #define OMAP1610_GPIO_DIRECTION 0x0034 #define OMAP1610_GPIO_EDGE_CTRL1 0x0038 #define OMAP1610_GPIO_EDGE_CTRL2 0x003c #define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c +#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8 #define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0 #define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc +#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8 #define OMAP1610_GPIO_SET_DATAOUT 0x00f0 /* * OMAP730 specific GPIO registers */ -#define OMAP730_GPIO1_BASE 0xfffbc000 -#define OMAP730_GPIO2_BASE 0xfffbc800 -#define OMAP730_GPIO3_BASE 0xfffbd000 -#define OMAP730_GPIO4_BASE 0xfffbd800 -#define OMAP730_GPIO5_BASE 0xfffbe000 -#define OMAP730_GPIO6_BASE 0xfffbe800 +#define OMAP730_GPIO1_BASE (void __iomem *)0xfffbc000 +#define OMAP730_GPIO2_BASE (void __iomem *)0xfffbc800 +#define OMAP730_GPIO3_BASE (void __iomem *)0xfffbd000 +#define OMAP730_GPIO4_BASE (void __iomem *)0xfffbd800 +#define OMAP730_GPIO5_BASE (void __iomem *)0xfffbe000 +#define OMAP730_GPIO6_BASE (void __iomem *)0xfffbe800 #define OMAP730_GPIO_DATA_INPUT 0x00 #define OMAP730_GPIO_DATA_OUTPUT 0x04 #define OMAP730_GPIO_DIR_CONTROL 0x08 @@ -78,14 +84,43 @@ #define OMAP730_GPIO_INT_MASK 0x10 #define OMAP730_GPIO_INT_STATUS 0x14 +/* + * omap24xx specific GPIO registers + */ +#define OMAP24XX_GPIO1_BASE (void __iomem *)0x48018000 +#define OMAP24XX_GPIO2_BASE (void __iomem *)0x4801a000 +#define OMAP24XX_GPIO3_BASE (void __iomem *)0x4801c000 +#define OMAP24XX_GPIO4_BASE (void __iomem *)0x4801e000 +#define OMAP24XX_GPIO_REVISION 0x0000 +#define OMAP24XX_GPIO_SYSCONFIG 0x0010 +#define OMAP24XX_GPIO_SYSSTATUS 0x0014 +#define OMAP24XX_GPIO_IRQSTATUS1 0x0018 +#define OMAP24XX_GPIO_IRQENABLE1 0x001c +#define OMAP24XX_GPIO_CTRL 0x0030 +#define OMAP24XX_GPIO_OE 0x0034 +#define OMAP24XX_GPIO_DATAIN 0x0038 +#define OMAP24XX_GPIO_DATAOUT 0x003c +#define OMAP24XX_GPIO_LEVELDETECT0 0x0040 +#define OMAP24XX_GPIO_LEVELDETECT1 0x0044 +#define OMAP24XX_GPIO_RISINGDETECT 0x0048 +#define OMAP24XX_GPIO_FALLINGDETECT 0x004c +#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060 +#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064 +#define OMAP24XX_GPIO_CLEARWKUENA 0x0080 +#define OMAP24XX_GPIO_SETWKUENA 0x0084 +#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 +#define OMAP24XX_GPIO_SETDATAOUT 0x0094 + #define OMAP_MPUIO_MASK (~OMAP_MAX_GPIO_LINES & 0xff) struct gpio_bank { - u32 base; + void __iomem *base; u16 irq; u16 virtual_irq_start; - u8 method; + int method; u32 reserved_map; + u32 suspend_wakeup; + u32 saved_wakeup; spinlock_t lock; }; @@ -93,8 +128,9 @@ struct gpio_bank { #define METHOD_GPIO_1510 1 #define METHOD_GPIO_1610 2 #define METHOD_GPIO_730 3 +#define METHOD_GPIO_24XX 4 -#if defined(CONFIG_ARCH_OMAP16XX) +#ifdef CONFIG_ARCH_OMAP16XX static struct gpio_bank gpio_bank_1610[5] = { { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO}, { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 }, @@ -123,6 +159,15 @@ static struct gpio_bank gpio_bank_730[7] = { }; #endif +#ifdef CONFIG_ARCH_OMAP24XX +static struct gpio_bank gpio_bank_24xx[4] = { + { OMAP24XX_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, + { OMAP24XX_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, + { OMAP24XX_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, + { OMAP24XX_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, +}; +#endif + static struct gpio_bank *gpio_bank; static int gpio_bank_count; @@ -149,14 +194,23 @@ static inline struct gpio_bank *get_gpio_bank(int gpio) return &gpio_bank[1 + (gpio >> 5)]; } #endif +#ifdef CONFIG_ARCH_OMAP24XX + if (cpu_is_omap24xx()) + return &gpio_bank[gpio >> 5]; +#endif } static inline int get_gpio_index(int gpio) { +#ifdef CONFIG_ARCH_OMAP730 if (cpu_is_omap730()) return gpio & 0x1f; - else - return gpio & 0x0f; +#endif +#ifdef CONFIG_ARCH_OMAP24XX + if (cpu_is_omap24xx()) + return gpio & 0x1f; +#endif + return gpio & 0x0f; } static inline int gpio_valid(int gpio) @@ -180,6 +234,10 @@ static inline int gpio_valid(int gpio) if (cpu_is_omap730() && gpio < 192) return 0; #endif +#ifdef CONFIG_ARCH_OMAP24XX + if (cpu_is_omap24xx() && gpio < 128) + return 0; +#endif return -1; } @@ -195,7 +253,7 @@ static int check_gpio(int gpio) static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) { - u32 reg = bank->base; + void __iomem *reg = bank->base; u32 l; switch (bank->method) { @@ -211,6 +269,9 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) case METHOD_GPIO_730: reg += OMAP730_GPIO_DIR_CONTROL; break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_OE; + break; } l = __raw_readl(reg); if (is_input) @@ -234,7 +295,7 @@ void omap_set_gpio_direction(int gpio, int is_input) static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) { - u32 reg = bank->base; + void __iomem *reg = bank->base; u32 l = 0; switch (bank->method) { @@ -269,6 +330,13 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) else l &= ~(1 << gpio); break; + case METHOD_GPIO_24XX: + if (enable) + reg += OMAP24XX_GPIO_SETDATAOUT; + else + reg += OMAP24XX_GPIO_CLEARDATAOUT; + l = 1 << gpio; + break; default: BUG(); return; @@ -291,7 +359,7 @@ void omap_set_gpio_dataout(int gpio, int enable) int omap_get_gpio_datain(int gpio) { struct gpio_bank *bank; - u32 reg; + void __iomem *reg; if (check_gpio(gpio) < 0) return -1; @@ -310,109 +378,132 @@ int omap_get_gpio_datain(int gpio) case METHOD_GPIO_730: reg += OMAP730_GPIO_DATA_INPUT; break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_DATAIN; + break; default: BUG(); return -1; } - return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0; + return (__raw_readl(reg) + & (1 << get_gpio_index(gpio))) != 0; } -static void _set_gpio_edge_ctrl(struct gpio_bank *bank, int gpio, int edge) +#define MOD_REG_BIT(reg, bit_mask, set) \ +do { \ + int l = __raw_readl(base + reg); \ + if (set) l |= bit_mask; \ + else l &= ~bit_mask; \ + __raw_writel(l, base + reg); \ +} while(0) + +static inline void set_24xx_gpio_triggering(void __iomem *base, int gpio, int trigger) { - u32 reg = bank->base; - u32 l; + u32 gpio_bit = 1 << gpio; + + MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQT_LOW); + MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQT_HIGH); + MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQT_RISING); + MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQT_FALLING); + /* FIXME: Possibly do 'set_irq_handler(j, do_level_IRQ)' if only level + * triggering requested. */ +} + +static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) +{ + void __iomem *reg = bank->base; + u32 l = 0; switch (bank->method) { case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_INT_EDGE; l = __raw_readl(reg); - if (edge == OMAP_GPIO_RISING_EDGE) + if (trigger == IRQT_RISING) l |= 1 << gpio; - else + else if (trigger == IRQT_FALLING) l &= ~(1 << gpio); - __raw_writel(l, reg); + else + goto bad; break; case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (edge == OMAP_GPIO_RISING_EDGE) + if (trigger == IRQT_RISING) l |= 1 << gpio; - else + else if (trigger == IRQT_FALLING) l &= ~(1 << gpio); - __raw_writel(l, reg); + else + goto bad; break; case METHOD_GPIO_1610: - edge &= 0x03; if (gpio & 0x08) reg += OMAP1610_GPIO_EDGE_CTRL2; else reg += OMAP1610_GPIO_EDGE_CTRL1; gpio &= 0x07; + /* We allow only edge triggering, i.e. two lowest bits */ + if (trigger & ~IRQT_BOTHEDGE) + BUG(); + /* NOTE: knows __IRQT_{FAL,RIS}EDGE match OMAP hardware */ + trigger &= 0x03; l = __raw_readl(reg); l &= ~(3 << (gpio << 1)); - l |= edge << (gpio << 1); - __raw_writel(l, reg); + l |= trigger << (gpio << 1); break; case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (edge == OMAP_GPIO_RISING_EDGE) + if (trigger == IRQT_RISING) l |= 1 << gpio; - else + else if (trigger == IRQT_FALLING) l &= ~(1 << gpio); - __raw_writel(l, reg); + else + goto bad; + break; + case METHOD_GPIO_24XX: + set_24xx_gpio_triggering(reg, gpio, trigger); break; default: BUG(); - return; + goto bad; } + __raw_writel(l, reg); + return 0; +bad: + return -EINVAL; } -void omap_set_gpio_edge_ctrl(int gpio, int edge) +static int gpio_irq_type(unsigned irq, unsigned type) { struct gpio_bank *bank; + unsigned gpio; + int retval; + + if (irq > IH_MPUIO_BASE) + gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE); + else + gpio = irq - IH_GPIO_BASE; if (check_gpio(gpio) < 0) - return; + return -EINVAL; + + if (type & (__IRQT_LOWLVL|__IRQT_HIGHLVL|IRQT_PROBE)) + return -EINVAL; + bank = get_gpio_bank(gpio); spin_lock(&bank->lock); - _set_gpio_edge_ctrl(bank, get_gpio_index(gpio), edge); + retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); spin_unlock(&bank->lock); -} - - -static int _get_gpio_edge_ctrl(struct gpio_bank *bank, int gpio) -{ - u32 reg = bank->base, l; - - switch (bank->method) { - case METHOD_MPUIO: - l = __raw_readl(reg + OMAP_MPUIO_GPIO_INT_EDGE); - return (l & (1 << gpio)) ? - OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE; - case METHOD_GPIO_1510: - l = __raw_readl(reg + OMAP1510_GPIO_INT_CONTROL); - return (l & (1 << gpio)) ? - OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE; - case METHOD_GPIO_1610: - if (gpio & 0x08) - reg += OMAP1610_GPIO_EDGE_CTRL2; - else - reg += OMAP1610_GPIO_EDGE_CTRL1; - return (__raw_readl(reg) >> ((gpio & 0x07) << 1)) & 0x03; - case METHOD_GPIO_730: - l = __raw_readl(reg + OMAP730_GPIO_INT_CONTROL); - return (l & (1 << gpio)) ? - OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE; - default: - BUG(); - return -1; - } + return retval; } static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) { - u32 reg = bank->base; + void __iomem *reg = bank->base; switch (bank->method) { case METHOD_MPUIO: @@ -428,6 +519,9 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_STATUS; break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_IRQSTATUS1; + break; default: BUG(); return; @@ -442,7 +536,7 @@ static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable) { - u32 reg = bank->base; + void __iomem *reg = bank->base; u32 l; switch (bank->method) { @@ -477,6 +571,13 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab else l |= gpio_mask; break; + case METHOD_GPIO_24XX: + if (enable) + reg += OMAP24XX_GPIO_SETIRQENABLE1; + else + reg += OMAP24XX_GPIO_CLEARIRQENABLE1; + l = gpio_mask; + break; default: BUG(); return; @@ -489,6 +590,50 @@ static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int ena _enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable); } +/* + * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register. + * 1510 does not seem to have a wake-up register. If JTAG is connected + * to the target, system will wake up always on GPIO events. While + * system is running all registered GPIO interrupts need to have wake-up + * enabled. When system is suspended, only selected GPIO interrupts need + * to have wake-up enabled. + */ +static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) +{ + switch (bank->method) { + case METHOD_GPIO_1610: + case METHOD_GPIO_24XX: + spin_lock(&bank->lock); + if (enable) + bank->suspend_wakeup |= (1 << gpio); + else + bank->suspend_wakeup &= ~(1 << gpio); + spin_unlock(&bank->lock); + return 0; + default: + printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n", + bank->method); + return -EINVAL; + } +} + +/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ +static int gpio_wake_enable(unsigned int irq, unsigned int enable) +{ + unsigned int gpio = irq - IH_GPIO_BASE; + struct gpio_bank *bank; + int retval; + + if (check_gpio(gpio) < 0) + return -ENODEV; + bank = get_gpio_bank(gpio); + spin_lock(&bank->lock); + retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable); + spin_unlock(&bank->lock); + + return retval; +} + int omap_request_gpio(int gpio) { struct gpio_bank *bank; @@ -505,15 +650,33 @@ int omap_request_gpio(int gpio) return -1; } bank->reserved_map |= (1 << get_gpio_index(gpio)); + + /* Set trigger to none. You need to enable the trigger after request_irq */ + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); + #ifdef CONFIG_ARCH_OMAP1510 if (bank->method == METHOD_GPIO_1510) { - u32 reg; + void __iomem *reg; - /* Claim the pin for the ARM */ + /* Claim the pin for MPU */ reg = bank->base + OMAP1510_GPIO_PIN_CONTROL; __raw_writel(__raw_readl(reg) | (1 << get_gpio_index(gpio)), reg); } #endif +#ifdef CONFIG_ARCH_OMAP16XX + if (bank->method == METHOD_GPIO_1610) { + /* Enable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + __raw_writel(1 << get_gpio_index(gpio), reg); + } +#endif +#ifdef CONFIG_ARCH_OMAP24XX + if (bank->method == METHOD_GPIO_24XX) { + /* Enable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP24XX_GPIO_SETWKUENA; + __raw_writel(1 << get_gpio_index(gpio), reg); + } +#endif spin_unlock(&bank->lock); return 0; @@ -533,6 +696,20 @@ void omap_free_gpio(int gpio) spin_unlock(&bank->lock); return; } +#ifdef CONFIG_ARCH_OMAP16XX + if (bank->method == METHOD_GPIO_1610) { + /* Disable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + __raw_writel(1 << get_gpio_index(gpio), reg); + } +#endif +#ifdef CONFIG_ARCH_OMAP24XX + if (bank->method == METHOD_GPIO_24XX) { + /* Disable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; + __raw_writel(1 << get_gpio_index(gpio), reg); + } +#endif bank->reserved_map &= ~(1 << get_gpio_index(gpio)); _set_gpio_direction(bank, get_gpio_index(gpio), 1); _set_gpio_irqenable(bank, gpio, 0); @@ -552,7 +729,7 @@ void omap_free_gpio(int gpio) static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) { - u32 isr_reg = 0; + void __iomem *isr_reg = NULL; u32 isr; unsigned int gpio_irq; struct gpio_bank *bank; @@ -574,24 +751,30 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, if (bank->method == METHOD_GPIO_730) isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; #endif +#ifdef CONFIG_ARCH_OMAP24XX + if (bank->method == METHOD_GPIO_24XX) + isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; +#endif - isr = __raw_readl(isr_reg); - _enable_gpio_irqbank(bank, isr, 0); - _clear_gpio_irqbank(bank, isr); - _enable_gpio_irqbank(bank, isr, 1); - desc->chip->unmask(irq); - - if (unlikely(!isr)) - return; - - gpio_irq = bank->virtual_irq_start; - for (; isr != 0; isr >>= 1, gpio_irq++) { - struct irqdesc *d; - if (!(isr & 1)) - continue; - d = irq_desc + gpio_irq; - d->handle(gpio_irq, d, regs); - } + while(1) { + isr = __raw_readl(isr_reg); + _enable_gpio_irqbank(bank, isr, 0); + _clear_gpio_irqbank(bank, isr); + _enable_gpio_irqbank(bank, isr, 1); + desc->chip->unmask(irq); + + if (!isr) + break; + + gpio_irq = bank->virtual_irq_start; + for (; isr != 0; isr >>= 1, gpio_irq++) { + struct irqdesc *d; + if (!(isr & 1)) + continue; + d = irq_desc + gpio_irq; + desc_handle_irq(gpio_irq, d, regs); + } + } } static void gpio_ack_irq(unsigned int irq) @@ -613,14 +796,10 @@ static void gpio_mask_irq(unsigned int irq) static void gpio_unmask_irq(unsigned int irq) { unsigned int gpio = irq - IH_GPIO_BASE; + unsigned int gpio_idx = get_gpio_index(gpio); struct gpio_bank *bank = get_gpio_bank(gpio); - if (_get_gpio_edge_ctrl(bank, get_gpio_index(gpio)) == OMAP_GPIO_NO_EDGE) { - printk(KERN_ERR "OMAP GPIO %d: trying to enable GPIO IRQ while no edge is set\n", - gpio); - _set_gpio_edge_ctrl(bank, get_gpio_index(gpio), OMAP_GPIO_RISING_EDGE); - } - _set_gpio_irqenable(bank, gpio, 1); + _set_gpio_irqenable(bank, gpio_idx, 1); } static void mpuio_ack_irq(unsigned int irq) @@ -645,9 +824,11 @@ static void mpuio_unmask_irq(unsigned int irq) } static struct irqchip gpio_irq_chip = { - .ack = gpio_ack_irq, - .mask = gpio_mask_irq, - .unmask = gpio_unmask_irq, + .ack = gpio_ack_irq, + .mask = gpio_mask_irq, + .unmask = gpio_unmask_irq, + .set_type = gpio_irq_type, + .set_wake = gpio_wake_enable, }; static struct irqchip mpuio_irq_chip = { @@ -657,6 +838,7 @@ static struct irqchip mpuio_irq_chip = { }; static int initialized = 0; +static struct clk * gpio_ck = NULL; static int __init _omap_gpio_init(void) { @@ -665,6 +847,14 @@ static int __init _omap_gpio_init(void) initialized = 1; + if (cpu_is_omap1510()) { + gpio_ck = clk_get(NULL, "arm_gpio_ck"); + if (IS_ERR(gpio_ck)) + printk("Could not get arm_gpio_ck\n"); + else + clk_use(gpio_ck); + } + #ifdef CONFIG_ARCH_OMAP1510 if (cpu_is_omap1510()) { printk(KERN_INFO "OMAP1510 GPIO hardware\n"); @@ -674,7 +864,7 @@ static int __init _omap_gpio_init(void) #endif #if defined(CONFIG_ARCH_OMAP16XX) if (cpu_is_omap16xx()) { - int rev; + u32 rev; gpio_bank_count = 5; gpio_bank = gpio_bank_1610; @@ -690,6 +880,17 @@ static int __init _omap_gpio_init(void) gpio_bank = gpio_bank_730; } #endif +#ifdef CONFIG_ARCH_OMAP24XX + if (cpu_is_omap24xx()) { + int rev; + + gpio_bank_count = 4; + gpio_bank = gpio_bank_24xx; + rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + printk(KERN_INFO "OMAP24xx GPIO hardware version %d.%d\n", + (rev >> 4) & 0x0f, rev & 0x0f); + } +#endif for (i = 0; i < gpio_bank_count; i++) { int j, gpio_count = 16; @@ -710,6 +911,7 @@ static int __init _omap_gpio_init(void) if (bank->method == METHOD_GPIO_1610) { __raw_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1); __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); + __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); } #endif #ifdef CONFIG_ARCH_OMAP730 @@ -720,6 +922,14 @@ static int __init _omap_gpio_init(void) gpio_count = 32; /* 730 has 32-bit GPIOs */ } #endif +#ifdef CONFIG_ARCH_OMAP24XX + if (bank->method == METHOD_GPIO_24XX) { + __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1); + __raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1); + + gpio_count = 32; + } +#endif for (j = bank->virtual_irq_start; j < bank->virtual_irq_start + gpio_count; j++) { if (bank->method == METHOD_MPUIO) @@ -735,12 +945,97 @@ static int __init _omap_gpio_init(void) /* Enable system clock for GPIO module. * The CAM_CLK_CTRL *is* really the right place. */ - if (cpu_is_omap1610() || cpu_is_omap1710()) + if (cpu_is_omap16xx()) omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL); return 0; } +#if defined (CONFIG_ARCH_OMAP16XX) || defined (CONFIG_ARCH_OMAP24XX) +static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) +{ + int i; + + if (!cpu_is_omap24xx() && !cpu_is_omap16xx()) + return 0; + + for (i = 0; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + void __iomem *wake_status; + void __iomem *wake_clear; + void __iomem *wake_set; + + switch (bank->method) { + case METHOD_GPIO_1610: + wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE; + wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + break; + case METHOD_GPIO_24XX: + wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA; + wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; + wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; + break; + default: + continue; + } + + spin_lock(&bank->lock); + bank->saved_wakeup = __raw_readl(wake_status); + __raw_writel(0xffffffff, wake_clear); + __raw_writel(bank->suspend_wakeup, wake_set); + spin_unlock(&bank->lock); + } + + return 0; +} + +static int omap_gpio_resume(struct sys_device *dev) +{ + int i; + + if (!cpu_is_omap24xx() && !cpu_is_omap16xx()) + return 0; + + for (i = 0; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + void __iomem *wake_clear; + void __iomem *wake_set; + + switch (bank->method) { + case METHOD_GPIO_1610: + wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + break; + case METHOD_GPIO_24XX: + wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + break; + default: + continue; + } + + spin_lock(&bank->lock); + __raw_writel(0xffffffff, wake_clear); + __raw_writel(bank->saved_wakeup, wake_set); + spin_unlock(&bank->lock); + } + + return 0; +} + +static struct sysdev_class omap_gpio_sysclass = { + set_kset_name("gpio"), + .suspend = omap_gpio_suspend, + .resume = omap_gpio_resume, +}; + +static struct sys_device omap_gpio_device = { + .id = 0, + .cls = &omap_gpio_sysclass, +}; +#endif + /* * This may get called early from board specific init */ @@ -752,11 +1047,30 @@ int omap_gpio_init(void) return 0; } +static int __init omap_gpio_sysinit(void) +{ + int ret = 0; + + if (!initialized) + ret = _omap_gpio_init(); + +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) + if (cpu_is_omap16xx() || cpu_is_omap24xx()) { + if (ret == 0) { + ret = sysdev_class_register(&omap_gpio_sysclass); + if (ret == 0) + ret = sysdev_register(&omap_gpio_device); + } + } +#endif + + return ret; +} + EXPORT_SYMBOL(omap_request_gpio); EXPORT_SYMBOL(omap_free_gpio); EXPORT_SYMBOL(omap_set_gpio_direction); EXPORT_SYMBOL(omap_set_gpio_dataout); EXPORT_SYMBOL(omap_get_gpio_datain); -EXPORT_SYMBOL(omap_set_gpio_edge_ctrl); -arch_initcall(omap_gpio_init); +arch_initcall(omap_gpio_sysinit); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 43567d5edddb..9c9b7df3faf6 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -27,6 +27,7 @@ #include <asm/arch/dma.h> #include <asm/arch/mux.h> #include <asm/arch/irqs.h> +#include <asm/arch/dsp_common.h> #include <asm/arch/mcbsp.h> #include <asm/hardware/clock.h> @@ -187,9 +188,6 @@ static int omap_mcbsp_check(unsigned int id) return -1; } -#define EN_XORPCK 1 -#define DSP_RSTCT2 0xe1008014 - static void omap_mcbsp_dsp_request(void) { if (cpu_is_omap1510() || cpu_is_omap16xx()) { @@ -198,6 +196,11 @@ static void omap_mcbsp_dsp_request(void) /* enable 12MHz clock to mcbsp 1 & 3 */ clk_use(mcbsp_dspxor_ck); + + /* + * DSP external peripheral reset + * FIXME: This should be moved to dsp code + */ __raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1, DSP_RSTCT2); } diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index ea7b955b9c81..64482040f89e 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -48,6 +48,9 @@ omap_cfg_reg(const reg_cfg_t reg_cfg) pull_orig = 0, pull = 0; unsigned int mask, warn = 0; + if (cpu_is_omap7xx()) + return 0; + if (reg_cfg > ARRAY_SIZE(reg_cfg_table)) { printk(KERN_ERR "MUX: reg_cfg %d\n", reg_cfg); return -EINVAL; diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c index 2ede2ee8cae4..1fb16f9edfd5 100644 --- a/arch/arm/plat-omap/ocpi.c +++ b/arch/arm/plat-omap/ocpi.c @@ -25,6 +25,7 @@ #include <linux/config.h> #include <linux/module.h> +#include <linux/version.h> #include <linux/types.h> #include <linux/errno.h> #include <linux/kernel.h> diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c index e6536b16c385..e15c6c1ddec9 100644 --- a/arch/arm/plat-omap/pm.c +++ b/arch/arm/plat-omap/pm.c @@ -39,24 +39,32 @@ #include <linux/sched.h> #include <linux/proc_fs.h> #include <linux/pm.h> +#include <linux/interrupt.h> #include <asm/io.h> +#include <asm/irq.h> #include <asm/mach/time.h> -#include <asm/mach-types.h> +#include <asm/mach/irq.h> -#include <asm/arch/omap16xx.h> +#include <asm/mach-types.h> +#include <asm/arch/irqs.h> +#include <asm/arch/tc.h> #include <asm/arch/pm.h> #include <asm/arch/mux.h> -#include <asm/arch/tc.h> #include <asm/arch/tps65010.h> +#include <asm/arch/dsp_common.h> #include "clock.h" +#include "sram.h" static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; +static void (*omap_sram_idle)(void) = NULL; +static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; + /* * Let's power down on idle, but only if we are really * idle, because once we start down the path of @@ -65,7 +73,6 @@ static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; */ void omap_pm_idle(void) { - int (*func_ptr)(void) = 0; unsigned int mask32 = 0; /* @@ -84,6 +91,13 @@ void omap_pm_idle(void) mask32 = omap_readl(ARM_SYSST); /* + * Prevent the ULPD from entering low power state by setting + * POWER_CTRL_REG:4 = 0 + */ + omap_writew(omap_readw(ULPD_POWER_CTRL) & + ~ULPD_DEEP_SLEEP_TRANSITION_EN, ULPD_POWER_CTRL); + + /* * Since an interrupt may set up a timer, we don't want to * reprogram the hardware timer with interrupts enabled. * Re-enable interrupts only after returning from idle. @@ -92,18 +106,9 @@ void omap_pm_idle(void) if ((mask32 & DSP_IDLE) == 0) { __asm__ volatile ("mcr p15, 0, r0, c7, c0, 4"); - } else { - - if (cpu_is_omap1510()) { - func_ptr = (void *)(OMAP1510_SRAM_IDLE_SUSPEND); - } else if (cpu_is_omap1610() || cpu_is_omap1710()) { - func_ptr = (void *)(OMAP1610_SRAM_IDLE_SUSPEND); - } else if (cpu_is_omap5912()) { - func_ptr = (void *)(OMAP5912_SRAM_IDLE_SUSPEND); - } + } else + omap_sram_idle(); - func_ptr(); - } local_fiq_enable(); local_irq_enable(); } @@ -115,58 +120,55 @@ void omap_pm_idle(void) */ static void omap_pm_wakeup_setup(void) { - /* - * Enable ARM XOR clock and release peripheral from reset by - * writing 1 to PER_EN bit in ARM_RSTCT2, this is required - * for UART configuration to use UART2 to wake up. - */ - - omap_writel(omap_readl(ARM_IDLECT2) | ENABLE_XORCLK, ARM_IDLECT2); - omap_writel(omap_readl(ARM_RSTCT2) | PER_EN, ARM_RSTCT2); - omap_writew(MODEM_32K_EN, ULPD_CLOCK_CTRL); + u32 level1_wake = OMAP_IRQ_BIT(INT_IH2_IRQ); + u32 level2_wake = OMAP_IRQ_BIT(INT_UART2) | OMAP_IRQ_BIT(INT_KEYBOARD); /* - * Turn off all interrupts except L1-2nd level cascade, - * and the L2 wakeup interrupts: keypad and UART2. + * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade, + * and the L2 wakeup interrupts: keypad and UART2. Note that the + * drivers must still separately call omap_set_gpio_wakeup() to + * wake up to a GPIO interrupt. */ + if (cpu_is_omap1510() || cpu_is_omap16xx()) + level1_wake |= OMAP_IRQ_BIT(INT_GPIO_BANK1); + else if (cpu_is_omap730()) + level1_wake |= OMAP_IRQ_BIT(INT_730_GPIO_BANK1); - omap_writel(~IRQ_LEVEL2, OMAP_IH1_MIR); + omap_writel(~level1_wake, OMAP_IH1_MIR); - if (cpu_is_omap1510()) { - omap_writel(~(IRQ_UART2 | IRQ_KEYBOARD), OMAP_IH2_MIR); - } + if (cpu_is_omap1510()) + omap_writel(~level2_wake, OMAP_IH2_MIR); + /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */ if (cpu_is_omap16xx()) { - omap_writel(~(IRQ_UART2 | IRQ_KEYBOARD), OMAP_IH2_0_MIR); - - omap_writel(~0x0, OMAP_IH2_1_MIR); + omap_writel(~level2_wake, OMAP_IH2_0_MIR); + omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), OMAP_IH2_1_MIR); omap_writel(~0x0, OMAP_IH2_2_MIR); omap_writel(~0x0, OMAP_IH2_3_MIR); } - /* New IRQ agreement */ + /* New IRQ agreement, recalculate in cascade order */ + omap_writel(1, OMAP_IH2_CONTROL); omap_writel(1, OMAP_IH1_CONTROL); - - /* external PULL to down, bit 22 = 0 */ - omap_writel(omap_readl(PULL_DWN_CTRL_2) & ~(1<<22), PULL_DWN_CTRL_2); } void omap_pm_suspend(void) { - unsigned int mask32 = 0; unsigned long arg0 = 0, arg1 = 0; - int (*func_ptr)(unsigned short, unsigned short) = 0; - unsigned short save_dsp_idlect2; - printk("PM: OMAP%x is entering deep sleep now ...\n", system_rev); + printk("PM: OMAP%x is trying to enter deep sleep...\n", system_rev); + + omap_serial_wake_trigger(1); if (machine_is_omap_osk()) { /* Stop LED1 (D9) blink */ tps65010_set_led(LED1, OFF); } + omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG); + /* - * Step 1: turn off interrupts + * Step 1: turn off interrupts (FIXME: NOTE: already disabled) */ local_irq_disable(); @@ -207,6 +209,8 @@ void omap_pm_suspend(void) ARM_SAVE(ARM_CKCTL); ARM_SAVE(ARM_IDLECT1); ARM_SAVE(ARM_IDLECT2); + if (!(cpu_is_omap1510())) + ARM_SAVE(ARM_IDLECT3); ARM_SAVE(ARM_EWUPCT); ARM_SAVE(ARM_RSTCT1); ARM_SAVE(ARM_RSTCT2); @@ -214,42 +218,12 @@ void omap_pm_suspend(void) ULPD_SAVE(ULPD_CLOCK_CTRL); ULPD_SAVE(ULPD_STATUS_REQ); - /* - * Step 3: LOW_PWR signal enabling - * - * Allow the LOW_PWR signal to be visible on MPUIO5 ball. - */ - if (cpu_is_omap1510()) { - /* POWER_CTRL_REG = 0x1 (LOW_POWER is available) */ - omap_writew(omap_readw(ULPD_POWER_CTRL) | - OMAP1510_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL); - } else if (cpu_is_omap16xx()) { - /* POWER_CTRL_REG = 0x1 (LOW_POWER is available) */ - omap_writew(omap_readw(ULPD_POWER_CTRL) | - OMAP1610_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL); - } - - /* configure LOW_PWR pin */ - omap_cfg_reg(T20_1610_LOW_PWR); + /* (Step 3 removed - we now allow deep sleep by default) */ /* * Step 4: OMAP DSP Shutdown */ - /* Set DSP_RST = 1 and DSP_EN = 0, put DSP block into reset */ - omap_writel((omap_readl(ARM_RSTCT1) | DSP_RST) & ~DSP_ENABLE, - ARM_RSTCT1); - - /* Set DSP boot mode to DSP-IDLE, DSP_BOOT_MODE = 0x2 */ - omap_writel(DSP_IDLE_MODE, MPUI_DSP_BOOT_CONFIG); - - /* Set EN_DSPCK = 0, stop DSP block clock */ - omap_writel(omap_readl(ARM_CKCTL) & ~DSP_CLOCK_ENABLE, ARM_CKCTL); - - /* Stop any DSP domain clocks */ - omap_writel(omap_readl(ARM_IDLECT2) | (1<<EN_APICK), ARM_IDLECT2); - save_dsp_idlect2 = __raw_readw(DSP_IDLECT2); - __raw_writew(0, DSP_IDLECT2); /* * Step 5: Wakeup Event Setup @@ -258,24 +232,9 @@ void omap_pm_suspend(void) omap_pm_wakeup_setup(); /* - * Step 6a: ARM and Traffic controller shutdown - * - * Step 6 starts here with clock and watchdog disable + * Step 6: ARM and Traffic controller shutdown */ - /* stop clocks */ - mask32 = omap_readl(ARM_IDLECT2); - mask32 &= ~(1<<EN_WDTCK); /* bit 0 -> 0 (WDT clock) */ - mask32 |= (1<<EN_XORPCK); /* bit 1 -> 1 (XORPCK clock) */ - mask32 &= ~(1<<EN_PERCK); /* bit 2 -> 0 (MPUPER_CK clock) */ - mask32 &= ~(1<<EN_LCDCK); /* bit 3 -> 0 (LCDC clock) */ - mask32 &= ~(1<<EN_LBCK); /* bit 4 -> 0 (local bus clock) */ - mask32 |= (1<<EN_APICK); /* bit 6 -> 1 (MPUI clock) */ - mask32 &= ~(1<<EN_TIMCK); /* bit 7 -> 0 (MPU timer clock) */ - mask32 &= ~(1<<DMACK_REQ); /* bit 8 -> 0 (DMAC clock) */ - mask32 &= ~(1<<EN_GPIOCK); /* bit 9 -> 0 (GPIO clock) */ - omap_writel(mask32, ARM_IDLECT2); - /* disable ARM watchdog */ omap_writel(0x00F5, OMAP_WDT_TIMER_MODE); omap_writel(0x00A0, OMAP_WDT_TIMER_MODE); @@ -295,47 +254,24 @@ void omap_pm_suspend(void) arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1]; arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2]; - if (cpu_is_omap1510()) { - func_ptr = (void *)(OMAP1510_SRAM_API_SUSPEND); - } else if (cpu_is_omap1610() || cpu_is_omap1710()) { - func_ptr = (void *)(OMAP1610_SRAM_API_SUSPEND); - } else if (cpu_is_omap5912()) { - func_ptr = (void *)(OMAP5912_SRAM_API_SUSPEND); - } - /* * Step 6c: ARM and Traffic controller shutdown * * Jump to assembly code. The processor will stay there * until wake up. */ - - func_ptr(arg0, arg1); + omap_sram_suspend(arg0, arg1); /* * If we are here, processor is woken up! */ - if (cpu_is_omap1510()) { - /* POWER_CTRL_REG = 0x0 (LOW_POWER is disabled) */ - omap_writew(omap_readw(ULPD_POWER_CTRL) & - ~OMAP1510_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL); - } else if (cpu_is_omap16xx()) { - /* POWER_CTRL_REG = 0x0 (LOW_POWER is disabled) */ - omap_writew(omap_readw(ULPD_POWER_CTRL) & - ~OMAP1610_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL); - } - - - /* Restore DSP clocks */ - omap_writel(omap_readl(ARM_IDLECT2) | (1<<EN_APICK), ARM_IDLECT2); - __raw_writew(save_dsp_idlect2, DSP_IDLECT2); - ARM_RESTORE(ARM_IDLECT2); - /* * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did */ + if (!(cpu_is_omap1510())) + ARM_RESTORE(ARM_IDLECT3); ARM_RESTORE(ARM_CKCTL); ARM_RESTORE(ARM_EWUPCT); ARM_RESTORE(ARM_RSTCT1); @@ -366,6 +302,8 @@ void omap_pm_suspend(void) MPUI1610_RESTORE(OMAP_IH2_3_MIR); } + omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG); + /* * Reenable interrupts */ @@ -373,6 +311,8 @@ void omap_pm_suspend(void) local_irq_enable(); local_fiq_enable(); + omap_serial_wake_trigger(0); + printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev); if (machine_is_omap_osk()) { @@ -401,6 +341,8 @@ static int omap_pm_read_proc( ARM_SAVE(ARM_CKCTL); ARM_SAVE(ARM_IDLECT1); ARM_SAVE(ARM_IDLECT2); + if (!(cpu_is_omap1510())) + ARM_SAVE(ARM_IDLECT3); ARM_SAVE(ARM_EWUPCT); ARM_SAVE(ARM_RSTCT1); ARM_SAVE(ARM_RSTCT2); @@ -436,6 +378,7 @@ static int omap_pm_read_proc( "ARM_CKCTL_REG: 0x%-8x \n" "ARM_IDLECT1_REG: 0x%-8x \n" "ARM_IDLECT2_REG: 0x%-8x \n" + "ARM_IDLECT3_REG: 0x%-8x \n" "ARM_EWUPCT_REG: 0x%-8x \n" "ARM_RSTCT1_REG: 0x%-8x \n" "ARM_RSTCT2_REG: 0x%-8x \n" @@ -449,6 +392,7 @@ static int omap_pm_read_proc( ARM_SHOW(ARM_CKCTL), ARM_SHOW(ARM_IDLECT1), ARM_SHOW(ARM_IDLECT2), + ARM_SHOW(ARM_IDLECT3), ARM_SHOW(ARM_EWUPCT), ARM_SHOW(ARM_RSTCT1), ARM_SHOW(ARM_RSTCT2), @@ -507,7 +451,7 @@ static void omap_pm_init_proc(void) entry = create_proc_read_entry("driver/omap_pm", S_IWUSR | S_IRUGO, NULL, - omap_pm_read_proc, 0); + omap_pm_read_proc, NULL); } #endif /* DEBUG && CONFIG_PROC_FS */ @@ -580,7 +524,21 @@ static int omap_pm_finish(suspend_state_t state) } -struct pm_ops omap_pm_ops ={ +static irqreturn_t omap_wakeup_interrupt(int irq, void * dev, + struct pt_regs * regs) +{ + return IRQ_HANDLED; +} + +static struct irqaction omap_wakeup_irq = { + .name = "peripheral wakeup", + .flags = SA_INTERRUPT, + .handler = omap_wakeup_interrupt +}; + + + +static struct pm_ops omap_pm_ops ={ .pm_disk_mode = 0, .prepare = omap_pm_prepare, .enter = omap_pm_enter, @@ -590,42 +548,61 @@ struct pm_ops omap_pm_ops ={ static int __init omap_pm_init(void) { printk("Power Management for TI OMAP.\n"); - pm_idle = omap_pm_idle; /* * We copy the assembler sleep/wakeup routines to SRAM. * These routines need to be in SRAM as that's the only * memory the MPU can see when it wakes up. */ - -#ifdef CONFIG_ARCH_OMAP1510 if (cpu_is_omap1510()) { - memcpy((void *)OMAP1510_SRAM_IDLE_SUSPEND, - omap1510_idle_loop_suspend, - omap1510_idle_loop_suspend_sz); - memcpy((void *)OMAP1510_SRAM_API_SUSPEND, omap1510_cpu_suspend, - omap1510_cpu_suspend_sz); - } else -#endif - if (cpu_is_omap1610() || cpu_is_omap1710()) { - memcpy((void *)OMAP1610_SRAM_IDLE_SUSPEND, - omap1610_idle_loop_suspend, - omap1610_idle_loop_suspend_sz); - memcpy((void *)OMAP1610_SRAM_API_SUSPEND, omap1610_cpu_suspend, - omap1610_cpu_suspend_sz); - } else if (cpu_is_omap5912()) { - memcpy((void *)OMAP5912_SRAM_IDLE_SUSPEND, - omap1610_idle_loop_suspend, - omap1610_idle_loop_suspend_sz); - memcpy((void *)OMAP5912_SRAM_API_SUSPEND, omap1610_cpu_suspend, - omap1610_cpu_suspend_sz); + omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend, + omap1510_idle_loop_suspend_sz); + omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, + omap1510_cpu_suspend_sz); + } else if (cpu_is_omap16xx()) { + omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend, + omap1610_idle_loop_suspend_sz); + omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend, + omap1610_cpu_suspend_sz); } + if (omap_sram_idle == NULL || omap_sram_suspend == NULL) { + printk(KERN_ERR "PM not initialized: Missing SRAM support\n"); + return -ENODEV; + } + + pm_idle = omap_pm_idle; + + setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); +#if 0 + /* --- BEGIN BOARD-DEPENDENT CODE --- */ + /* Sleepx mask direction */ + omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008); + /* Unmask sleepx signal */ + omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); + /* --- END BOARD-DEPENDENT CODE --- */ +#endif + + /* Program new power ramp-up time + * (0 for most boards since we don't lower voltage when in deep sleep) + */ + omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3); + + /* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */ + omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL); + + /* Configure IDLECT3 */ + if (cpu_is_omap16xx()) + omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); + pm_set_ops(&omap_pm_ops); #if defined(DEBUG) && defined(CONFIG_PROC_FS) omap_pm_init_proc(); #endif + /* configure LOW_PWR pin */ + omap_cfg_reg(T20_1610_LOW_PWR); + return 0; } __initcall(omap_pm_init); diff --git a/arch/arm/plat-omap/sleep.S b/arch/arm/plat-omap/sleep.S index 279490ce772b..9f745836f6aa 100644 --- a/arch/arm/plat-omap/sleep.S +++ b/arch/arm/plat-omap/sleep.S @@ -66,7 +66,7 @@ ENTRY(omap1510_idle_loop_suspend) @ get ARM_IDLECT2 into r2 ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] mov r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff - orr r5,r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 + orr r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] @ request ARM idle @@ -76,7 +76,7 @@ ENTRY(omap1510_idle_loop_suspend) strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 + orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 l_1510: subs r5, r5, #1 bne l_1510 /* @@ -96,7 +96,7 @@ l_1510: subs r5, r5, #1 strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - ldmfd sp!, {r0 - r12, pc} @ restore regs and return + ldmfd sp!, {r0 - r12, pc} @ restore regs and return ENTRY(omap1510_idle_loop_suspend_sz) .word . - omap1510_idle_loop_suspend @@ -115,8 +115,8 @@ ENTRY(omap1610_idle_loop_suspend) @ turn off clock domains @ get ARM_IDLECT2 into r2 ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - mov r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff - orr r5,r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff00 + mov r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff + orr r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] @ request ARM idle @@ -126,7 +126,7 @@ ENTRY(omap1610_idle_loop_suspend) strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 + orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 l_1610: subs r5, r5, #1 bne l_1610 /* @@ -146,7 +146,7 @@ l_1610: subs r5, r5, #1 strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - ldmfd sp!, {r0 - r12, pc} @ restore regs and return + ldmfd sp!, {r0 - r12, pc} @ restore regs and return ENTRY(omap1610_idle_loop_suspend_sz) .word . - omap1610_idle_loop_suspend @@ -208,7 +208,7 @@ ENTRY(omap1510_cpu_suspend) @ turn off clock domains mov r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff - orr r5,r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 + orr r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] @ request ARM idle @@ -217,7 +217,7 @@ ENTRY(omap1510_cpu_suspend) strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 + orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 l_1510_2: subs r5, r5, #1 bne l_1510_2 @@ -237,7 +237,7 @@ l_1510_2: strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] @ restore regs and return - ldmfd sp!, {r0 - r12, pc} + ldmfd sp!, {r0 - r12, pc} ENTRY(omap1510_cpu_suspend_sz) .word . - omap1510_cpu_suspend @@ -249,21 +249,26 @@ ENTRY(omap1610_cpu_suspend) @ save registers on stack stmfd sp!, {r0 - r12, lr} + @ Drain write cache + mov r4, #0 + mcr p15, 0, r0, c7, c10, 4 + nop + @ load base address of Traffic Controller - mov r4, #TCMIF_ASM_BASE & 0xff000000 - orr r4, r4, #TCMIF_ASM_BASE & 0x00ff0000 - orr r4, r4, #TCMIF_ASM_BASE & 0x0000ff00 + mov r6, #TCMIF_ASM_BASE & 0xff000000 + orr r6, r6, #TCMIF_ASM_BASE & 0x00ff0000 + orr r6, r6, #TCMIF_ASM_BASE & 0x0000ff00 @ prepare to put SDRAM into self-refresh manually - ldr r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - orr r5, r5, #SELF_REFRESH_MODE & 0xff000000 - orr r5, r5, #SELF_REFRESH_MODE & 0x000000ff - str r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] + ldr r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] + orr r9, r7, #SELF_REFRESH_MODE & 0xff000000 + orr r9, r9, #SELF_REFRESH_MODE & 0x000000ff + str r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] @ prepare to put EMIFS to Sleep - ldr r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - orr r5, r5, #IDLE_EMIFS_REQUEST & 0xff - str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] + ldr r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] + orr r9, r8, #IDLE_EMIFS_REQUEST & 0xff + str r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] @ load base address of ARM_IDLECT1 and ARM_IDLECT2 mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 @@ -271,26 +276,22 @@ ENTRY(omap1610_cpu_suspend) orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 @ turn off clock domains - mov r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff - orr r5,r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ work around errata of OMAP1610/5912. Enable (!) peripheral - @ clock to let the chip go into deep sleep - ldrh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - orr r5,r5, #EN_PERCK_BIT & 0xff + @ do not disable PERCK (0x04) + mov r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff + orr r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] @ request ARM idle - mov r3, #OMAP1610_DEEP_SLEEP_REQUEST & 0xff - orr r3, r3, #OMAP1610_DEEP_SLEEP_REQUEST & 0xff00 + mov r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff + orr r3, r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff00 strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 -l_1610_2: - subs r5, r5, #1 - bne l_1610_2 + @ disable instruction cache + mrc p15, 0, r9, c1, c0, 0 + bic r2, r9, #0x1000 + mcr p15, 0, r2, c1, c0, 0 + nop + /* * Let's wait for the next wake up event to wake us up. r0 can't be * used here because r0 holds ARM_IDLECT1 @@ -301,13 +302,21 @@ l_1610_2: * omap1610_cpu_suspend()'s resume point. * * It will just start executing here, so we'll restore stuff from the - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. + * stack. */ + @ re-enable Icache + mcr p15, 0, r9, c1, c0, 0 + + @ reset the ARM_IDLECT1 and ARM_IDLECT2. strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + @ Restore EMIFF controls + str r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] + str r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] + @ restore regs and return - ldmfd sp!, {r0 - r12, pc} + ldmfd sp!, {r0 - r12, pc} ENTRY(omap1610_cpu_suspend_sz) .word . - omap1610_cpu_suspend diff --git a/arch/arm/plat-omap/sram-fn.S b/arch/arm/plat-omap/sram-fn.S new file mode 100644 index 000000000000..4bea36964a00 --- /dev/null +++ b/arch/arm/plat-omap/sram-fn.S @@ -0,0 +1,58 @@ +/* + * linux/arch/arm/plat-omap/sram.S + * + * Functions that need to be run in internal SRAM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/arch/io.h> +#include <asm/arch/hardware.h> + + .text + +/* + * Reprograms ULPD and CKCTL. + */ +ENTRY(sram_reprogram_clock) + stmfd sp!, {r0 - r12, lr} @ save registers on stack + + mov r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000 + orr r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x00ff0000 + orr r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x0000ff00 + + mov r3, #IO_ADDRESS(ARM_CKCTL) & 0xff000000 + orr r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x00ff0000 + orr r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x0000ff00 + + tst r0, #1 << 4 @ want lock mode? + beq newck @ nope + bic r0, r0, #1 << 4 @ else clear lock bit + strh r0, [r2] @ set dpll into bypass mode + orr r0, r0, #1 << 4 @ set lock bit again + +newck: + strh r1, [r3] @ write new ckctl value + strh r0, [r2] @ write new dpll value + + mov r4, #0x0700 @ let the clocks settle + orr r4, r4, #0x00ff +delay: sub r4, r4, #1 + cmp r4, #0 + bne delay + +lock: ldrh r4, [r2], #0 @ read back dpll value + tst r0, #1 << 4 @ want lock mode? + beq out @ nope + tst r4, #1 << 0 @ dpll rate locked? + beq lock @ try again + +out: + ldmfd sp!, {r0 - r12, pc} @ restore regs and return +ENTRY(sram_reprogram_clock_sz) + .word . - sram_reprogram_clock diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c new file mode 100644 index 000000000000..7719a4062e3a --- /dev/null +++ b/arch/arm/plat-omap/sram.c @@ -0,0 +1,116 @@ +/* + * linux/arch/arm/plat-omap/sram.c + * + * OMAP SRAM detection and management + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/mach/map.h> +#include <asm/io.h> +#include <asm/cacheflush.h> + +#include "sram.h" + +#define OMAP1_SRAM_BASE 0xd0000000 +#define OMAP1_SRAM_START 0x20000000 +#define SRAM_BOOTLOADER_SZ 0x80 + +static unsigned long omap_sram_base; +static unsigned long omap_sram_size; +static unsigned long omap_sram_ceil; + +/* + * The amount of SRAM depends on the core type: + * 730 = 200K, 1510 = 512K, 5912 = 256K, 1610 = 16K, 1710 = 16K + * Note that we cannot try to test for SRAM here because writes + * to secure SRAM will hang the system. Also the SRAM is not + * yet mapped at this point. + */ +void __init omap_detect_sram(void) +{ + omap_sram_base = OMAP1_SRAM_BASE; + + if (cpu_is_omap730()) + omap_sram_size = 0x32000; + else if (cpu_is_omap1510()) + omap_sram_size = 0x80000; + else if (cpu_is_omap1610() || cpu_is_omap1621() || cpu_is_omap1710()) + omap_sram_size = 0x4000; + else if (cpu_is_omap1611()) + omap_sram_size = 0x3e800; + else { + printk(KERN_ERR "Could not detect SRAM size\n"); + omap_sram_size = 0x4000; + } + + printk(KERN_INFO "SRAM size: 0x%lx\n", omap_sram_size); + omap_sram_ceil = omap_sram_base + omap_sram_size; +} + +static struct map_desc omap_sram_io_desc[] __initdata = { + { OMAP1_SRAM_BASE, OMAP1_SRAM_START, 0, MT_DEVICE } +}; + +/* + * In order to use last 2kB of SRAM on 1611b, we must round the size + * up to multiple of PAGE_SIZE. We cannot use ioremap for SRAM, as + * clock init needs SRAM early. + */ +void __init omap_map_sram(void) +{ + if (omap_sram_size == 0) + return; + + omap_sram_io_desc[0].length = (omap_sram_size + PAGE_SIZE-1)/PAGE_SIZE; + omap_sram_io_desc[0].length *= PAGE_SIZE; + iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc)); + + /* + * Looks like we need to preserve some bootloader code at the + * beginning of SRAM for jumping to flash for reboot to work... + */ + memset((void *)omap_sram_base + SRAM_BOOTLOADER_SZ, 0, + omap_sram_size - SRAM_BOOTLOADER_SZ); +} + +static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl) = NULL; + +void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) +{ + if (_omap_sram_reprogram_clock == NULL) + panic("Cannot use SRAM"); + + return _omap_sram_reprogram_clock(dpllctl, ckctl); +} + +void * omap_sram_push(void * start, unsigned long size) +{ + if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) { + printk(KERN_ERR "Not enough space in SRAM\n"); + return NULL; + } + omap_sram_ceil -= size; + omap_sram_ceil &= ~0x3; + memcpy((void *)omap_sram_ceil, start, size); + + return (void *)omap_sram_ceil; +} + +void __init omap_sram_init(void) +{ + omap_detect_sram(); + omap_map_sram(); + _omap_sram_reprogram_clock = omap_sram_push(sram_reprogram_clock, + sram_reprogram_clock_sz); +} diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h new file mode 100644 index 000000000000..71984efa6ae8 --- /dev/null +++ b/arch/arm/plat-omap/sram.h @@ -0,0 +1,21 @@ +/* + * linux/arch/arm/plat-omap/sram.h + * + * Interface for functions that need to be run in internal SRAM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_OMAP_SRAM_H +#define __ARCH_ARM_OMAP_SRAM_H + +extern void * omap_sram_push(void * start, unsigned long size); +extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); + +/* Do not use these */ +extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long sram_reprogram_clock_sz; + +#endif diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 25bc4a8dd763..98f1c76f8660 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -41,6 +41,7 @@ /* These routines should handle the standard chip-specific modes * for usb0/1/2 ports, covering basic mux and transceiver setup. + * Call omap_usb_init() once, from INIT_MACHINE(). * * Some board-*.c files will need to set up additional mux options, * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup. diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index e73c8deca592..6f17187ab32a 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -17,7 +17,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> -#include <asm/constants.h> +#include <asm/asm-offsets.h> #include <asm/vfpmacros.h> .globl do_vfp diff --git a/arch/arm26/Kconfig b/arch/arm26/Kconfig index 1f0373267306..1f00b3d03a07 100644 --- a/arch/arm26/Kconfig +++ b/arch/arm26/Kconfig @@ -55,6 +55,10 @@ config GENERIC_BUST_SPINLOCK config GENERIC_ISA_DMA bool +config ARCH_MAY_HAVE_PC_FDC + bool + default y + source "init/Kconfig" diff --git a/arch/arm26/Makefile b/arch/arm26/Makefile index ada8985530a5..844a9e46886e 100644 --- a/arch/arm26/Makefile +++ b/arch/arm26/Makefile @@ -17,10 +17,6 @@ ifeq ($(CONFIG_FRAME_POINTER),y) CFLAGS +=-fno-omit-frame-pointer -mno-sched-prolog endif -ifeq ($(CONFIG_DEBUG_INFO),y) -CFLAGS +=-g -endif - CFLAGS_BOOT :=-mapcs-26 -mcpu=arm3 -msoft-float -Uarm CFLAGS +=-mapcs-26 -mcpu=arm3 -msoft-float -Uarm AFLAGS +=-mapcs-26 -mcpu=arm3 -msoft-float @@ -53,10 +49,6 @@ all: zImage boot := arch/arm26/boot -prepare: include/asm-$(ARCH)/asm_offsets.h -CLEAN_FILES += include/asm-$(ARCH)/asm_offsets.h - - .PHONY: maketools FORCE maketools: FORCE @@ -98,12 +90,6 @@ zi:; $(Q)$(MAKE) $(build)=$(boot) zinstall fi; \ ) -arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \ - include/config/MARKER - -include/asm-$(ARCH)/asm_offsets.h: arch/$(ARCH)/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) - define archhelp echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)' echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' diff --git a/arch/arm26/kernel/entry.S b/arch/arm26/kernel/entry.S index a231dd88d0e1..6d910ea43d34 100644 --- a/arch/arm26/kernel/entry.S +++ b/arch/arm26/kernel/entry.S @@ -10,7 +10,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> #include <asm/errno.h> #include <asm/hardware.h> #include <asm/sysirq.h> diff --git a/arch/arm26/kernel/signal.c b/arch/arm26/kernel/signal.c index 356d9809cc0b..ce2055bdc9ee 100644 --- a/arch/arm26/kernel/signal.c +++ b/arch/arm26/kernel/signal.c @@ -454,14 +454,13 @@ handle_signal(unsigned long sig, siginfo_t *info, sigset_t *oldset, if (ka->sa.sa_flags & SA_ONESHOT) ka->sa.sa_handler = SIG_DFL; - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(&tsk->sighand->siglock); - sigorsets(&tsk->blocked, &tsk->blocked, - &ka->sa.sa_mask); + spin_lock_irq(&tsk->sighand->siglock); + sigorsets(&tsk->blocked, &tsk->blocked, + &ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) sigaddset(&tsk->blocked, sig); - recalc_sigpending(); - spin_unlock_irq(&tsk->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(&tsk->sighand->siglock); return; } diff --git a/arch/arm26/kernel/time.c b/arch/arm26/kernel/time.c index 549a6b2e177e..e66aedd02fad 100644 --- a/arch/arm26/kernel/time.c +++ b/arch/arm26/kernel/time.c @@ -114,7 +114,7 @@ static unsigned long next_rtc_update; */ static inline void do_set_rtc(void) { - if (time_status & STA_UNSYNC || set_rtc == NULL) + if (!ntp_synced() || set_rtc == NULL) return; //FIXME - timespec.tv_sec is a time_t not unsigned long @@ -189,10 +189,7 @@ int do_settimeofday(struct timespec *tv) xtime.tv_sec = tv->tv_sec; xtime.tv_nsec = tv->tv_nsec; - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/arm26/lib/copy_page.S b/arch/arm26/lib/copy_page.S index 2d79ee12ea1f..c7511a2739d3 100644 --- a/arch/arm26/lib/copy_page.S +++ b/arch/arm26/lib/copy_page.S @@ -11,7 +11,7 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> .text .align 5 diff --git a/arch/arm26/lib/csumpartialcopyuser.S b/arch/arm26/lib/csumpartialcopyuser.S index 5b821188e479..261dd154c1a4 100644 --- a/arch/arm26/lib/csumpartialcopyuser.S +++ b/arch/arm26/lib/csumpartialcopyuser.S @@ -11,7 +11,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/errno.h> -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> .text diff --git a/arch/arm26/lib/getuser.S b/arch/arm26/lib/getuser.S index e6d59b334851..2b1de7fbfe1f 100644 --- a/arch/arm26/lib/getuser.S +++ b/arch/arm26/lib/getuser.S @@ -26,7 +26,7 @@ * Note that ADDR_LIMIT is either 0 or 0xc0000000. * Note also that it is intended that __get_user_bad is not global. */ -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> #include <asm/thread_info.h> #include <asm/errno.h> diff --git a/arch/arm26/lib/putuser.S b/arch/arm26/lib/putuser.S index 87588cbe46ae..46c7f15f9f2d 100644 --- a/arch/arm26/lib/putuser.S +++ b/arch/arm26/lib/putuser.S @@ -26,7 +26,7 @@ * Note that ADDR_LIMIT is either 0 or 0xc0000000 * Note also that it is intended that __put_user_bad is not global. */ -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> #include <asm/thread_info.h> #include <asm/errno.h> diff --git a/arch/arm26/mm/proc-funcs.S b/arch/arm26/mm/proc-funcs.S index c3d4cd3f457e..f9fca524c57a 100644 --- a/arch/arm26/mm/proc-funcs.S +++ b/arch/arm26/mm/proc-funcs.S @@ -14,7 +14,7 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> #include <asm/procinfo.h> #include <asm/ptrace.h> diff --git a/arch/arm26/nwfpe/entry.S b/arch/arm26/nwfpe/entry.S index 7d6dfaad80c2..e6312000d9f8 100644 --- a/arch/arm26/nwfpe/entry.S +++ b/arch/arm26/nwfpe/entry.S @@ -20,7 +20,7 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> /* This is the kernel's entry point into the floating point emulator. It is called from the kernel with code similar to this: diff --git a/arch/cris/Kconfig.debug b/arch/cris/Kconfig.debug index cd72324935c4..0a1d62a23614 100644 --- a/arch/cris/Kconfig.debug +++ b/arch/cris/Kconfig.debug @@ -5,10 +5,13 @@ config PROFILING bool "Kernel profiling support" config SYSTEM_PROFILER - bool "System profiling support" + bool "System profiling support" + +source "lib/Kconfig.debug" config ETRAX_KGDB bool "Use kernel GDB debugger" + depends on DEBUG_KERNEL ---help--- The CRIS version of gdb can be used to remotely debug a running Linux kernel via the serial debug port. Provided you have gdb-cris @@ -22,25 +25,11 @@ config ETRAX_KGDB this option is turned on! -config DEBUG_INFO - bool "Compile the kernel with debug info" - help - If you say Y here the resulting kernel image will include - debugging info resulting in a larger kernel image. - Say Y here only if you plan to use gdb to debug the kernel. - If you don't debug the kernel, you can say N. - -config FRAME_POINTER - bool "Compile the kernel with frame pointers" - help - If you say Y here the resulting kernel image will be slightly larger - and slower, but it will give very useful debugging information. - If you don't debug the kernel, you can say N, but we may not be able - to solve problems without frame pointers. - config DEBUG_NMI_OOPS - bool "NMI causes oops printout" - help - If the system locks up without any debug information you can say Y - here to make it possible to dump an OOPS with an external NMI. + bool "NMI causes oops printout" + depends on DEBUG_KERNEL + help + If the system locks up without any debug information you can say Y + here to make it possible to dump an OOPS with an external NMI. + endmenu diff --git a/arch/cris/Makefile b/arch/cris/Makefile index 90ca8730b120..ea65d585cf5e 100644 --- a/arch/cris/Makefile +++ b/arch/cris/Makefile @@ -107,8 +107,7 @@ archclean: rm -f timage vmlinux.bin decompress.bin rescue.bin cramfs.img rm -rf $(LD_SCRIPT).tmp -prepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch \ - include/asm-$(ARCH)/$(SARCH)/offset.h +archprepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch # Create some links to make all tools happy $(SRC_ARCH)/.links: @@ -120,6 +119,7 @@ $(SRC_ARCH)/.links: @ln -sfn $(SRC_ARCH)/$(SARCH)/lib $(SRC_ARCH)/lib @ln -sfn $(SRC_ARCH)/$(SARCH) $(SRC_ARCH)/arch @ln -sfn $(SRC_ARCH)/$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S + @ln -sfn $(SRC_ARCH)/$(SARCH)/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c @touch $@ # Create link to sub arch includes @@ -128,9 +128,3 @@ $(srctree)/include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h) @rm -f include/asm-$(ARCH)/arch @ln -sf $(srctree)/include/asm-$(ARCH)/$(SARCH) $(srctree)/include/asm-$(ARCH)/arch @touch $@ - -arch/$(ARCH)/$(SARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \ - include/config/MARKER - -include/asm-$(ARCH)/$(SARCH)/offset.h: arch/$(ARCH)/$(SARCH)/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S index c0163bf94a50..c808005e8457 100644 --- a/arch/cris/arch-v10/kernel/entry.S +++ b/arch/cris/arch-v10/kernel/entry.S @@ -270,7 +270,7 @@ #include <asm/arch/sv_addr_ag.h> #include <asm/errno.h> #include <asm/thread_info.h> -#include <asm/arch/offset.h> +#include <asm/asm-offsets.h> #include <asm/page.h> #include <asm/pgtable.h> diff --git a/arch/cris/arch-v10/kernel/signal.c b/arch/cris/arch-v10/kernel/signal.c index 85e0032e664f..693771961f85 100644 --- a/arch/cris/arch-v10/kernel/signal.c +++ b/arch/cris/arch-v10/kernel/signal.c @@ -517,13 +517,12 @@ handle_signal(int canrestart, unsigned long sig, if (ka->sa.sa_flags & SA_ONESHOT) ka->sa.sa_handler = SIG_DFL; - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); } /* diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c index 6b7b4e0802e3..dc3dfe9b4a1a 100644 --- a/arch/cris/arch-v10/kernel/time.c +++ b/arch/cris/arch-v10/kernel/time.c @@ -240,7 +240,7 @@ timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * The division here is not time critical since it will run once in * 11 minutes */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 && (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) { diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S index a8ed55e5b403..3bd8503fec68 100644 --- a/arch/cris/arch-v32/kernel/entry.S +++ b/arch/cris/arch-v32/kernel/entry.S @@ -23,7 +23,7 @@ #include <asm/unistd.h> #include <asm/errno.h> #include <asm/thread_info.h> -#include <asm/arch/offset.h> +#include <asm/asm-offsets.h> #include <asm/arch/hwregs/asm/reg_map_asm.h> #include <asm/arch/hwregs/asm/intr_vect_defs_asm.h> diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c index fb4c79d5b76b..0a3614dab887 100644 --- a/arch/cris/arch-v32/kernel/signal.c +++ b/arch/cris/arch-v32/kernel/signal.c @@ -568,13 +568,12 @@ handle_signal(int canrestart, unsigned long sig, if (ka->sa.sa_flags & SA_ONESHOT) ka->sa.sa_handler = SIG_DFL; - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); } /* diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c index fa2d4323da25..a2d99b4aedcd 100644 --- a/arch/cris/kernel/time.c +++ b/arch/cris/kernel/time.c @@ -114,10 +114,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/frv/kernel/asm-offsets.c b/arch/frv/kernel/asm-offsets.c new file mode 100644 index 000000000000..9e263112a6e2 --- /dev/null +++ b/arch/frv/kernel/asm-offsets.c @@ -0,0 +1 @@ +/* Dummy asm-offsets.c file. Required by kbuild and ready to be used - hint! */ diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c index 62cfbd9b4f98..1a76d5247190 100644 --- a/arch/frv/kernel/frv_ksyms.c +++ b/arch/frv/kernel/frv_ksyms.c @@ -71,7 +71,6 @@ EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memcmp); EXPORT_SYMBOL(memscan); EXPORT_SYMBOL(memmove); -EXPORT_SYMBOL(strtok); EXPORT_SYMBOL(get_wchan); diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c index 36a2dffc8ebd..d4ccc0728dfe 100644 --- a/arch/frv/kernel/signal.c +++ b/arch/frv/kernel/signal.c @@ -506,13 +506,12 @@ static void handle_signal(unsigned long sig, siginfo_t *info, else setup_frame(sig, ka, oldset, regs); - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) sigaddset(¤t->blocked, sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); } /* end handle_signal() */ /*****************************************************************************/ diff --git a/arch/frv/kernel/time.c b/arch/frv/kernel/time.c index 075db6644694..8d6558b00e44 100644 --- a/arch/frv/kernel/time.c +++ b/arch/frv/kernel/time.c @@ -85,7 +85,7 @@ static irqreturn_t timer_interrupt(int irq, void *dummy, struct pt_regs * regs) * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2 @@ -216,10 +216,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile index c9b80cffd71d..40b3f56f3666 100644 --- a/arch/h8300/Makefile +++ b/arch/h8300/Makefile @@ -61,12 +61,6 @@ archmrproper: archclean: $(Q)$(MAKE) $(clean)=$(boot) -prepare: include/asm-$(ARCH)/asm-offsets.h - -include/asm-$(ARCH)/asm-offsets.h: arch/$(ARCH)/kernel/asm-offsets.s \ - include/asm include/linux/version.h - $(call filechk,gen-asm-offsets) - vmlinux.srec vmlinux.bin: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ @@ -74,5 +68,3 @@ define archhelp echo 'vmlinux.bin - Create raw binary' echo 'vmlinux.srec - Create srec binary' endef - -CLEAN_FILES += include/asm-$(ARCH)/asm-offsets.h diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c index 5aab87eae1f9..f13d5e82d4b9 100644 --- a/arch/h8300/kernel/signal.c +++ b/arch/h8300/kernel/signal.c @@ -488,13 +488,12 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, else setup_frame(sig, ka, oldset, regs); - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); } /* diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c index 8a600218334d..af8c5d2057dd 100644 --- a/arch/h8300/kernel/time.c +++ b/arch/h8300/kernel/time.c @@ -116,10 +116,7 @@ int do_settimeofday(struct timespec *tv) xtime.tv_sec = tv->tv_sec; xtime.tv_nsec = tv->tv_nsec; - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 619d843ba231..b22f003eaa6d 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -14,6 +14,10 @@ config X86 486, 586, Pentiums, and various instruction-set-compatible chips by AMD, Cyrix, and others. +config SEMAPHORE_SLEEPERS + bool + default y + config MMU bool default y @@ -33,6 +37,10 @@ config GENERIC_IOMAP bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + default y + source "init/Kconfig" menu "Processor type and features" @@ -754,6 +762,7 @@ config NUMA depends on SMP && HIGHMEM64G && (X86_NUMAQ || X86_GENERICARCH || (X86_SUMMIT && ACPI)) default n if X86_PC default y if (X86_NUMAQ || X86_SUMMIT) + select SPARSEMEM_STATIC # Need comments to help the hapless user trying to turn on NUMA support comment "NUMA (NUMA-Q) requires SMP, 64GB highmem support" @@ -1203,7 +1212,6 @@ config PCI_DIRECT config PCI_MMCONFIG bool depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY) - select ACPI_BOOT default y source "drivers/pci/pcie/Kconfig" @@ -1313,6 +1321,11 @@ config GENERIC_IRQ_PROBE bool default y +config GENERIC_PENDING_IRQ + bool + depends on GENERIC_HARDIRQS && SMP + default y + config X86_SMP bool depends on SMP && !X86_VOYAGER diff --git a/arch/i386/Makefile b/arch/i386/Makefile index bf7c9ba709f3..09951990a622 100644 --- a/arch/i386/Makefile +++ b/arch/i386/Makefile @@ -156,15 +156,6 @@ install: vmlinux install kernel_install: $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install -prepare: include/asm-$(ARCH)/asm_offsets.h -CLEAN_FILES += include/asm-$(ARCH)/asm_offsets.h - -arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \ - include/config/MARKER - -include/asm-$(ARCH)/asm_offsets.h: arch/$(ARCH)/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) - archclean: $(Q)$(MAKE) $(clean)=arch/i386/boot diff --git a/arch/i386/boot/setup.S b/arch/i386/boot/setup.S index 8cb420f40c58..ca668d9df164 100644 --- a/arch/i386/boot/setup.S +++ b/arch/i386/boot/setup.S @@ -82,7 +82,7 @@ start: # This is the setup header, and it must start at %cs:2 (old 0x9020:2) .ascii "HdrS" # header signature - .word 0x0203 # header version number (>= 0x0105) + .word 0x0204 # header version number (>= 0x0105) # or else old loadlin-1.5 will fail) realmode_swtch: .word 0, 0 # default_switch, SETUPSEG start_sys_seg: .word SYSSEG diff --git a/arch/i386/boot/tools/build.c b/arch/i386/boot/tools/build.c index 6835f6d47c31..05798419a6a9 100644 --- a/arch/i386/boot/tools/build.c +++ b/arch/i386/boot/tools/build.c @@ -177,7 +177,9 @@ int main(int argc, char ** argv) die("Output: seek failed"); buf[0] = (sys_size & 0xff); buf[1] = ((sys_size >> 8) & 0xff); - if (write(1, buf, 2) != 2) + buf[2] = ((sys_size >> 16) & 0xff); + buf[3] = ((sys_size >> 24) & 0xff); + if (write(1, buf, 4) != 4) die("Write of image length failed"); return 0; /* Everything is OK */ diff --git a/arch/i386/boot/video.S b/arch/i386/boot/video.S index 0587477c99f2..92f669470142 100644 --- a/arch/i386/boot/video.S +++ b/arch/i386/boot/video.S @@ -97,6 +97,7 @@ #define PARAM_VESAPM_OFF 0x30 #define PARAM_LFB_PAGES 0x32 #define PARAM_VESA_ATTRIB 0x34 +#define PARAM_CAPABILITIES 0x36 /* Define DO_STORE according to CONFIG_VIDEO_RETAIN */ #ifdef CONFIG_VIDEO_RETAIN @@ -233,6 +234,10 @@ mopar_gr: movw 18(%di), %ax movl %eax, %fs:(PARAM_LFB_SIZE) +# store mode capabilities + movl 10(%di), %eax + movl %eax, %fs:(PARAM_CAPABILITIES) + # switching the DAC to 8-bit is for <= 8 bpp only movw %fs:(PARAM_LFB_DEPTH), %ax cmpw $8, %ax @@ -1944,7 +1949,7 @@ store_edid: movw $0x4f15, %ax # do VBE/DDC movw $0x01, %bx movw $0x00, %cx - movw $0x01, %dx + movw $0x00, %dx movw $0x140, %di int $0x10 diff --git a/arch/i386/defconfig b/arch/i386/defconfig index ca07b95c06b8..6a431b926019 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -131,8 +131,6 @@ CONFIG_SOFTWARE_SUSPEND=y # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_AC=y @@ -144,10 +142,8 @@ CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_X86_PM_TIMER is not set diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 4cc83b322b36..f10de0f2c5e6 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -7,11 +7,11 @@ extra-y := head.o init_task.o vmlinux.lds obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \ ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \ pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \ - doublefault.o quirks.o + doublefault.o quirks.o i8237.o obj-y += cpu/ obj-y += timers/ -obj-$(CONFIG_ACPI_BOOT) += acpi/ +obj-$(CONFIG_ACPI) += acpi/ obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o obj-$(CONFIG_MCA) += mca.o obj-$(CONFIG_X86_MSR) += msr.o diff --git a/arch/i386/kernel/acpi/Makefile b/arch/i386/kernel/acpi/Makefile index 5e291a20c03d..267ca48e1b6c 100644 --- a/arch/i386/kernel/acpi/Makefile +++ b/arch/i386/kernel/acpi/Makefile @@ -1,4 +1,4 @@ -obj-$(CONFIG_ACPI_BOOT) := boot.o +obj-y := boot.o obj-$(CONFIG_X86_IO_APIC) += earlyquirk.o obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index b7808a89d945..a63351c085c6 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -40,19 +40,25 @@ #ifdef CONFIG_X86_64 -static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id) { } +static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ +} extern void __init clustered_apic_check(void); -static inline int ioapic_setup_disabled(void) { return 0; } +static inline int ioapic_setup_disabled(void) +{ + return 0; +} + #include <asm/proto.h> -#else /* X86 */ +#else /* X86 */ #ifdef CONFIG_X86_LOCAL_APIC #include <mach_apic.h> #include <mach_mpparse.h> -#endif /* CONFIG_X86_LOCAL_APIC */ +#endif /* CONFIG_X86_LOCAL_APIC */ -#endif /* X86 */ +#endif /* X86 */ #define BAD_MADT_ENTRY(entry, end) ( \ (!entry) || (unsigned long)entry + sizeof(*entry) > end || \ @@ -60,13 +66,8 @@ static inline int ioapic_setup_disabled(void) { return 0; } #define PREFIX "ACPI: " -#ifdef CONFIG_ACPI_PCI int acpi_noirq __initdata; /* skip ACPI IRQ initialization */ -int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */ -#else -int acpi_noirq __initdata = 1; -int acpi_pci_disabled __initdata = 1; -#endif +int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */ int acpi_ht __initdata = 1; /* enable HT */ int acpi_lapic; @@ -88,7 +89,7 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; #define MAX_MADT_ENTRIES 256 u8 x86_acpiid_to_apicid[MAX_MADT_ENTRIES] = - { [0 ... MAX_MADT_ENTRIES-1] = 0xff }; + {[0 ... MAX_MADT_ENTRIES - 1] = 0xff }; EXPORT_SYMBOL(x86_acpiid_to_apicid); /* -------------------------------------------------------------------------- @@ -99,7 +100,7 @@ EXPORT_SYMBOL(x86_acpiid_to_apicid); * The default interrupt routing model is PIC (8259). This gets * overriden if IOAPICs are enumerated (below). */ -enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; +enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; #ifdef CONFIG_X86_64 @@ -107,7 +108,7 @@ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; char *__acpi_map_table(unsigned long phys_addr, unsigned long size) { if (!phys_addr || !size) - return NULL; + return NULL; if (phys_addr < (end_pfn_map << PAGE_SHIFT)) return __va(phys_addr); @@ -134,8 +135,8 @@ char *__acpi_map_table(unsigned long phys, unsigned long size) unsigned long base, offset, mapped_size; int idx; - if (phys + size < 8*1024*1024) - return __va(phys); + if (phys + size < 8 * 1024 * 1024) + return __va(phys); offset = phys & (PAGE_SIZE - 1); mapped_size = PAGE_SIZE - offset; @@ -154,7 +155,7 @@ char *__acpi_map_table(unsigned long phys, unsigned long size) mapped_size += PAGE_SIZE; } - return ((unsigned char *) base + offset); + return ((unsigned char *)base + offset); } #endif @@ -172,7 +173,7 @@ int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size) if (!phys_addr || !size) return -EINVAL; - mcfg = (struct acpi_table_mcfg *) __acpi_map_table(phys_addr, size); + mcfg = (struct acpi_table_mcfg *)__acpi_map_table(phys_addr, size); if (!mcfg) { printk(KERN_WARNING PREFIX "Unable to map MCFG\n"); return -ENODEV; @@ -209,20 +210,17 @@ int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size) return 0; } -#endif /* CONFIG_PCI_MMCONFIG */ +#endif /* CONFIG_PCI_MMCONFIG */ #ifdef CONFIG_X86_LOCAL_APIC -static int __init -acpi_parse_madt ( - unsigned long phys_addr, - unsigned long size) +static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size) { - struct acpi_table_madt *madt = NULL; + struct acpi_table_madt *madt = NULL; if (!phys_addr || !size) return -EINVAL; - madt = (struct acpi_table_madt *) __acpi_map_table(phys_addr, size); + madt = (struct acpi_table_madt *)__acpi_map_table(phys_addr, size); if (!madt) { printk(KERN_WARNING PREFIX "Unable to map MADT\n"); return -ENODEV; @@ -232,22 +230,20 @@ acpi_parse_madt ( acpi_lapic_addr = (u64) madt->lapic_address; printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n", - madt->lapic_address); + madt->lapic_address); } acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id); - + return 0; } - static int __init -acpi_parse_lapic ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic(acpi_table_entry_header * header, const unsigned long end) { - struct acpi_table_lapic *processor = NULL; + struct acpi_table_lapic *processor = NULL; - processor = (struct acpi_table_lapic*) header; + processor = (struct acpi_table_lapic *)header; if (BAD_MADT_ENTRY(processor, end)) return -EINVAL; @@ -260,20 +256,19 @@ acpi_parse_lapic ( x86_acpiid_to_apicid[processor->acpi_id] = processor->id; - mp_register_lapic ( - processor->id, /* APIC ID */ - processor->flags.enabled); /* Enabled? */ + mp_register_lapic(processor->id, /* APIC ID */ + processor->flags.enabled); /* Enabled? */ return 0; } static int __init -acpi_parse_lapic_addr_ovr ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic_addr_ovr(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_lapic_addr_ovr *lapic_addr_ovr = NULL; - lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr*) header; + lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr *)header; if (BAD_MADT_ENTRY(lapic_addr_ovr, end)) return -EINVAL; @@ -284,12 +279,11 @@ acpi_parse_lapic_addr_ovr ( } static int __init -acpi_parse_lapic_nmi ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_lapic_nmi *lapic_nmi = NULL; - lapic_nmi = (struct acpi_table_lapic_nmi*) header; + lapic_nmi = (struct acpi_table_lapic_nmi *)header; if (BAD_MADT_ENTRY(lapic_nmi, end)) return -EINVAL; @@ -302,37 +296,32 @@ acpi_parse_lapic_nmi ( return 0; } +#endif /*CONFIG_X86_LOCAL_APIC */ -#endif /*CONFIG_X86_LOCAL_APIC*/ - -#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER) +#ifdef CONFIG_X86_IO_APIC static int __init -acpi_parse_ioapic ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_ioapic(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_ioapic *ioapic = NULL; - ioapic = (struct acpi_table_ioapic*) header; + ioapic = (struct acpi_table_ioapic *)header; if (BAD_MADT_ENTRY(ioapic, end)) return -EINVAL; - + acpi_table_print_madt_entry(header); - mp_register_ioapic ( - ioapic->id, - ioapic->address, - ioapic->global_irq_base); - + mp_register_ioapic(ioapic->id, + ioapic->address, ioapic->global_irq_base); + return 0; } /* * Parse Interrupt Source Override for the ACPI SCI */ -static void -acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) +static void acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) { if (trigger == 0) /* compatible SCI trigger is level */ trigger = 3; @@ -348,7 +337,7 @@ acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) polarity = acpi_sci_flags.polarity; /* - * mp_config_acpi_legacy_irqs() already setup IRQs < 16 + * mp_config_acpi_legacy_irqs() already setup IRQs < 16 * If GSI is < 16, this will update its flags, * else it will create a new mp_irqs[] entry. */ @@ -363,12 +352,12 @@ acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) } static int __init -acpi_parse_int_src_ovr ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_int_src_ovr(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_int_src_ovr *intsrc = NULL; - intsrc = (struct acpi_table_int_src_ovr*) header; + intsrc = (struct acpi_table_int_src_ovr *)header; if (BAD_MADT_ENTRY(intsrc, end)) return -EINVAL; @@ -377,33 +366,30 @@ acpi_parse_int_src_ovr ( if (intsrc->bus_irq == acpi_fadt.sci_int) { acpi_sci_ioapic_setup(intsrc->global_irq, - intsrc->flags.polarity, intsrc->flags.trigger); + intsrc->flags.polarity, + intsrc->flags.trigger); return 0; } if (acpi_skip_timer_override && - intsrc->bus_irq == 0 && intsrc->global_irq == 2) { - printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); - return 0; + intsrc->bus_irq == 0 && intsrc->global_irq == 2) { + printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); + return 0; } - mp_override_legacy_irq ( - intsrc->bus_irq, - intsrc->flags.polarity, - intsrc->flags.trigger, - intsrc->global_irq); + mp_override_legacy_irq(intsrc->bus_irq, + intsrc->flags.polarity, + intsrc->flags.trigger, intsrc->global_irq); return 0; } - static int __init -acpi_parse_nmi_src ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_nmi_src *nmi_src = NULL; - nmi_src = (struct acpi_table_nmi_src*) header; + nmi_src = (struct acpi_table_nmi_src *)header; if (BAD_MADT_ENTRY(nmi_src, end)) return -EINVAL; @@ -415,9 +401,7 @@ acpi_parse_nmi_src ( return 0; } -#endif /* CONFIG_X86_IO_APIC */ - -#ifdef CONFIG_ACPI_BUS +#endif /* CONFIG_X86_IO_APIC */ /* * acpi_pic_sci_set_trigger() @@ -433,8 +417,7 @@ acpi_parse_nmi_src ( * ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0) */ -void __init -acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) +void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) { unsigned int mask = 1 << irq; unsigned int old, new; @@ -454,10 +437,10 @@ acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) * routing tables.. */ switch (trigger) { - case 1: /* Edge - clear */ + case 1: /* Edge - clear */ new &= ~mask; break; - case 3: /* Level - set */ + case 3: /* Level - set */ new |= mask; break; } @@ -470,21 +453,22 @@ acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) outb(new >> 8, 0x4d1); } - -#endif /* CONFIG_ACPI_BUS */ - int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) { #ifdef CONFIG_X86_IO_APIC if (use_pci_vector() && !platform_legacy_irq(gsi)) - *irq = IO_APIC_VECTOR(gsi); + *irq = IO_APIC_VECTOR(gsi); else #endif *irq = gsi; return 0; } -unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) +/* + * success: return IRQ number (>=0) + * failure: return < 0 + */ +int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) { unsigned int irq; unsigned int plat_gsi = gsi; @@ -497,7 +481,7 @@ unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) extern void eisa_set_level_irq(unsigned int irq); if (edge_level == ACPI_LEVEL_SENSITIVE) - eisa_set_level_irq(gsi); + eisa_set_level_irq(gsi); } #endif @@ -509,60 +493,58 @@ unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) acpi_gsi_to_irq(plat_gsi, &irq); return irq; } + EXPORT_SYMBOL(acpi_register_gsi); /* * ACPI based hotplug support for CPU */ #ifdef CONFIG_ACPI_HOTPLUG_CPU -int -acpi_map_lsapic(acpi_handle handle, int *pcpu) +int acpi_map_lsapic(acpi_handle handle, int *pcpu) { /* TBD */ return -EINVAL; } -EXPORT_SYMBOL(acpi_map_lsapic); +EXPORT_SYMBOL(acpi_map_lsapic); -int -acpi_unmap_lsapic(int cpu) +int acpi_unmap_lsapic(int cpu) { /* TBD */ return -EINVAL; } + EXPORT_SYMBOL(acpi_unmap_lsapic); -#endif /* CONFIG_ACPI_HOTPLUG_CPU */ +#endif /* CONFIG_ACPI_HOTPLUG_CPU */ -int -acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) +int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) { /* TBD */ return -EINVAL; } + EXPORT_SYMBOL(acpi_register_ioapic); -int -acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) +int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) { /* TBD */ return -EINVAL; } + EXPORT_SYMBOL(acpi_unregister_ioapic); static unsigned long __init -acpi_scan_rsdp ( - unsigned long start, - unsigned long length) +acpi_scan_rsdp(unsigned long start, unsigned long length) { - unsigned long offset = 0; - unsigned long sig_len = sizeof("RSD PTR ") - 1; + unsigned long offset = 0; + unsigned long sig_len = sizeof("RSD PTR ") - 1; /* * Scan all 16-byte boundaries of the physical memory region for the * RSDP signature. */ for (offset = 0; offset < length; offset += 16) { - if (strncmp((char *) (start + offset), "RSD PTR ", sig_len)) + if (strncmp((char *)(start + offset), "RSD PTR ", sig_len)) continue; return (start + offset); } @@ -575,20 +557,19 @@ static int __init acpi_parse_sbf(unsigned long phys_addr, unsigned long size) struct acpi_table_sbf *sb; if (!phys_addr || !size) - return -EINVAL; + return -EINVAL; - sb = (struct acpi_table_sbf *) __acpi_map_table(phys_addr, size); + sb = (struct acpi_table_sbf *)__acpi_map_table(phys_addr, size); if (!sb) { printk(KERN_WARNING PREFIX "Unable to map SBF\n"); return -ENODEV; } - sbf_port = sb->sbf_cmos; /* Save CMOS port */ + sbf_port = sb->sbf_cmos; /* Save CMOS port */ return 0; } - #ifdef CONFIG_HPET_TIMER static int __init acpi_parse_hpet(unsigned long phys, unsigned long size) @@ -598,7 +579,7 @@ static int __init acpi_parse_hpet(unsigned long phys, unsigned long size) if (!phys || !size) return -EINVAL; - hpet_tbl = (struct acpi_table_hpet *) __acpi_map_table(phys, size); + hpet_tbl = (struct acpi_table_hpet *)__acpi_map_table(phys, size); if (!hpet_tbl) { printk(KERN_WARNING PREFIX "Unable to map HPET\n"); return -ENODEV; @@ -609,22 +590,21 @@ static int __init acpi_parse_hpet(unsigned long phys, unsigned long size) "memory.\n"); return -1; } - #ifdef CONFIG_X86_64 - vxtime.hpet_address = hpet_tbl->addr.addrl | - ((long) hpet_tbl->addr.addrh << 32); + vxtime.hpet_address = hpet_tbl->addr.addrl | + ((long)hpet_tbl->addr.addrh << 32); - printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", - hpet_tbl->id, vxtime.hpet_address); -#else /* X86 */ + printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", + hpet_tbl->id, vxtime.hpet_address); +#else /* X86 */ { extern unsigned long hpet_address; hpet_address = hpet_tbl->addr.addrl; printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", - hpet_tbl->id, hpet_address); + hpet_tbl->id, hpet_address); } -#endif /* X86 */ +#endif /* X86 */ return 0; } @@ -640,28 +620,25 @@ static int __init acpi_parse_fadt(unsigned long phys, unsigned long size) { struct fadt_descriptor_rev2 *fadt = NULL; - fadt = (struct fadt_descriptor_rev2*) __acpi_map_table(phys,size); - if(!fadt) { + fadt = (struct fadt_descriptor_rev2 *)__acpi_map_table(phys, size); + if (!fadt) { printk(KERN_WARNING PREFIX "Unable to map FADT\n"); return 0; } - -#ifdef CONFIG_ACPI_INTERPRETER /* initialize sci_int early for INT_SRC_OVR MADT parsing */ acpi_fadt.sci_int = fadt->sci_int; -#endif -#ifdef CONFIG_ACPI_BUS /* initialize rev and apic_phys_dest_mode for x86_64 genapic */ acpi_fadt.revision = fadt->revision; - acpi_fadt.force_apic_physical_destination_mode = fadt->force_apic_physical_destination_mode; -#endif + acpi_fadt.force_apic_physical_destination_mode = + fadt->force_apic_physical_destination_mode; #ifdef CONFIG_X86_PM_TIMER /* detect the location of the ACPI PM Timer */ if (fadt->revision >= FADT2_REVISION_ID) { /* FADT rev. 2 */ - if (fadt->xpm_tmr_blk.address_space_id != ACPI_ADR_SPACE_SYSTEM_IO) + if (fadt->xpm_tmr_blk.address_space_id != + ACPI_ADR_SPACE_SYSTEM_IO) return 0; pmtmr_ioport = fadt->xpm_tmr_blk.address; @@ -670,16 +647,15 @@ static int __init acpi_parse_fadt(unsigned long phys, unsigned long size) pmtmr_ioport = fadt->V1_pm_tmr_blk; } if (pmtmr_ioport) - printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", pmtmr_ioport); + printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", + pmtmr_ioport); #endif return 0; } - -unsigned long __init -acpi_find_rsdp (void) +unsigned long __init acpi_find_rsdp(void) { - unsigned long rsdp_phys = 0; + unsigned long rsdp_phys = 0; if (efi_enabled) { if (efi.acpi20) @@ -691,9 +667,9 @@ acpi_find_rsdp (void) * Scan memory looking for the RSDP signature. First search EBDA (low * memory) paragraphs and then search upper memory (E0000-FFFFF). */ - rsdp_phys = acpi_scan_rsdp (0, 0x400); + rsdp_phys = acpi_scan_rsdp(0, 0x400); if (!rsdp_phys) - rsdp_phys = acpi_scan_rsdp (0xE0000, 0x20000); + rsdp_phys = acpi_scan_rsdp(0xE0000, 0x20000); return rsdp_phys; } @@ -703,8 +679,7 @@ acpi_find_rsdp (void) * Parse LAPIC entries in MADT * returns 0 on success, < 0 on error */ -static int __init -acpi_parse_madt_lapic_entries(void) +static int __init acpi_parse_madt_lapic_entries(void) { int count; @@ -713,28 +688,31 @@ acpi_parse_madt_lapic_entries(void) * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value). */ - count = acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0); + count = + acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, + acpi_parse_lapic_addr_ovr, 0); if (count < 0) { - printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n"); + printk(KERN_ERR PREFIX + "Error parsing LAPIC address override entry\n"); return count; } mp_register_lapic_address(acpi_lapic_addr); count = acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic, - MAX_APICS); - if (!count) { + MAX_APICS); + if (!count) { printk(KERN_ERR PREFIX "No LAPIC entries present\n"); /* TBD: Cleanup to allow fallback to MPS */ return -ENODEV; - } - else if (count < 0) { + } else if (count < 0) { printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n"); /* TBD: Cleanup to allow fallback to MPS */ return count; } - count = acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0); + count = + acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0); if (count < 0) { printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); /* TBD: Cleanup to allow fallback to MPS */ @@ -742,15 +720,14 @@ acpi_parse_madt_lapic_entries(void) } return 0; } -#endif /* CONFIG_X86_LOCAL_APIC */ +#endif /* CONFIG_X86_LOCAL_APIC */ -#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER) +#ifdef CONFIG_X86_IO_APIC /* * Parse IOAPIC related entries in MADT * returns 0 on success, < 0 on error */ -static int __init -acpi_parse_madt_ioapic_entries(void) +static int __init acpi_parse_madt_ioapic_entries(void) { int count; @@ -762,30 +739,34 @@ acpi_parse_madt_ioapic_entries(void) */ if (acpi_disabled || acpi_noirq) { return -ENODEV; - } + } /* - * if "noapic" boot option, don't look for IO-APICs + * if "noapic" boot option, don't look for IO-APICs */ if (skip_ioapic_setup) { printk(KERN_INFO PREFIX "Skipping IOAPIC probe " - "due to 'noapic' option.\n"); + "due to 'noapic' option.\n"); return -ENODEV; } - count = acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic, MAX_IO_APICS); + count = + acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic, + MAX_IO_APICS); if (!count) { printk(KERN_ERR PREFIX "No IOAPIC entries present\n"); return -ENODEV; - } - else if (count < 0) { + } else if (count < 0) { printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n"); return count; } - count = acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, NR_IRQ_VECTORS); + count = + acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, + NR_IRQ_VECTORS); if (count < 0) { - printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n"); + printk(KERN_ERR PREFIX + "Error parsing interrupt source overrides entry\n"); /* TBD: Cleanup to allow fallback to MPS */ return count; } @@ -800,7 +781,9 @@ acpi_parse_madt_ioapic_entries(void) /* Fill in identity legacy mapings where no override */ mp_config_acpi_legacy_irqs(); - count = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, NR_IRQ_VECTORS); + count = + acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, + NR_IRQ_VECTORS); if (count < 0) { printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); /* TBD: Cleanup to allow fallback to MPS */ @@ -814,11 +797,9 @@ static inline int acpi_parse_madt_ioapic_entries(void) { return -1; } -#endif /* !(CONFIG_X86_IO_APIC && CONFIG_ACPI_INTERPRETER) */ - +#endif /* !CONFIG_X86_IO_APIC */ -static void __init -acpi_process_madt(void) +static void __init acpi_process_madt(void) { #ifdef CONFIG_X86_LOCAL_APIC int count, error; @@ -833,6 +814,9 @@ acpi_process_madt(void) if (!error) { acpi_lapic = 1; +#ifdef CONFIG_X86_GENERICARCH + generic_bigsmp_probe(); +#endif /* * Parse MADT IO-APIC entries */ @@ -850,7 +834,8 @@ acpi_process_madt(void) /* * Dell Precision Workstation 410, 610 come here. */ - printk(KERN_ERR PREFIX "Invalid BIOS MADT, disabling ACPI\n"); + printk(KERN_ERR PREFIX + "Invalid BIOS MADT, disabling ACPI\n"); disable_acpi(); } } @@ -862,7 +847,6 @@ extern int acpi_force; #ifdef __i386__ -#ifdef CONFIG_ACPI_PCI static int __init disable_acpi_irq(struct dmi_system_id *d) { if (!acpi_force) { @@ -882,12 +866,11 @@ static int __init disable_acpi_pci(struct dmi_system_id *d) } return 0; } -#endif static int __init dmi_disable_acpi(struct dmi_system_id *d) { if (!acpi_force) { - printk(KERN_NOTICE "%s detected: acpi off\n",d->ident); + printk(KERN_NOTICE "%s detected: acpi off\n", d->ident); disable_acpi(); } else { printk(KERN_NOTICE @@ -902,7 +885,8 @@ static int __init dmi_disable_acpi(struct dmi_system_id *d) static int __init force_acpi_ht(struct dmi_system_id *d) { if (!acpi_force) { - printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", d->ident); + printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", + d->ident); disable_acpi(); acpi_ht = 1; } else { @@ -921,155 +905,155 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { * Boxes that need ACPI disabled */ { - .callback = dmi_disable_acpi, - .ident = "IBM Thinkpad", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "2629H1G"), - }, - }, + .callback = dmi_disable_acpi, + .ident = "IBM Thinkpad", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "2629H1G"), + }, + }, /* * Boxes that need acpi=ht */ { - .callback = force_acpi_ht, - .ident = "FSC Primergy T850", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), - DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"), - }, - }, + .callback = force_acpi_ht, + .ident = "FSC Primergy T850", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"), + }, + }, { - .callback = force_acpi_ht, - .ident = "DELL GX240", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_BOARD_NAME, "OptiPlex GX240"), - }, - }, + .callback = force_acpi_ht, + .ident = "DELL GX240", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "OptiPlex GX240"), + }, + }, { - .callback = force_acpi_ht, - .ident = "HP VISUALIZE NT Workstation", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"), - }, - }, + .callback = force_acpi_ht, + .ident = "HP VISUALIZE NT Workstation", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"), + }, + }, { - .callback = force_acpi_ht, - .ident = "Compaq Workstation W8000", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), - DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"), - }, - }, + .callback = force_acpi_ht, + .ident = "Compaq Workstation W8000", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), + DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"), + }, + }, { - .callback = force_acpi_ht, - .ident = "ASUS P4B266", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P4B266"), - }, - }, + .callback = force_acpi_ht, + .ident = "ASUS P4B266", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P4B266"), + }, + }, { - .callback = force_acpi_ht, - .ident = "ASUS P2B-DS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"), - }, - }, + .callback = force_acpi_ht, + .ident = "ASUS P2B-DS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"), + }, + }, { - .callback = force_acpi_ht, - .ident = "ASUS CUR-DLS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"), - }, - }, + .callback = force_acpi_ht, + .ident = "ASUS CUR-DLS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"), + }, + }, { - .callback = force_acpi_ht, - .ident = "ABIT i440BX-W83977", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"), - DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"), - }, - }, + .callback = force_acpi_ht, + .ident = "ABIT i440BX-W83977", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"), + DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"), + }, + }, { - .callback = force_acpi_ht, - .ident = "IBM Bladecenter", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"), - }, - }, + .callback = force_acpi_ht, + .ident = "IBM Bladecenter", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"), + }, + }, { - .callback = force_acpi_ht, - .ident = "IBM eServer xSeries 360", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"), - }, - }, + .callback = force_acpi_ht, + .ident = "IBM eServer xSeries 360", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"), + }, + }, { - .callback = force_acpi_ht, - .ident = "IBM eserver xSeries 330", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"), - }, - }, + .callback = force_acpi_ht, + .ident = "IBM eserver xSeries 330", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"), + }, + }, { - .callback = force_acpi_ht, - .ident = "IBM eserver xSeries 440", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"), - }, - }, - -#ifdef CONFIG_ACPI_PCI + .callback = force_acpi_ht, + .ident = "IBM eserver xSeries 440", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"), + }, + }, + /* * Boxes that need ACPI PCI IRQ routing disabled */ { - .callback = disable_acpi_irq, - .ident = "ASUS A7V", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"), - DMI_MATCH(DMI_BOARD_NAME, "<A7V>"), - /* newer BIOS, Revision 1011, does work */ - DMI_MATCH(DMI_BIOS_VERSION, "ASUS A7V ACPI BIOS Revision 1007"), - }, - }, + .callback = disable_acpi_irq, + .ident = "ASUS A7V", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"), + DMI_MATCH(DMI_BOARD_NAME, "<A7V>"), + /* newer BIOS, Revision 1011, does work */ + DMI_MATCH(DMI_BIOS_VERSION, + "ASUS A7V ACPI BIOS Revision 1007"), + }, + }, /* * Boxes that need ACPI PCI IRQ routing and PCI scan disabled */ - { /* _BBN 0 bug */ - .callback = disable_acpi_pci, - .ident = "ASUS PR-DLS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"), - DMI_MATCH(DMI_BIOS_VERSION, "ASUS PR-DLS ACPI BIOS Revision 1010"), - DMI_MATCH(DMI_BIOS_DATE, "03/21/2003") - }, - }, + { /* _BBN 0 bug */ + .callback = disable_acpi_pci, + .ident = "ASUS PR-DLS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"), + DMI_MATCH(DMI_BIOS_VERSION, + "ASUS PR-DLS ACPI BIOS Revision 1010"), + DMI_MATCH(DMI_BIOS_DATE, "03/21/2003") + }, + }, { - .callback = disable_acpi_pci, - .ident = "Acer TravelMate 36x Laptop", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Acer"), - DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), - }, - }, -#endif - { } + .callback = disable_acpi_pci, + .ident = "Acer TravelMate 36x Laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), + }, + }, + {} }; -#endif /* __i386__ */ +#endif /* __i386__ */ /* * acpi_boot_table_init() and acpi_boot_init() @@ -1094,8 +1078,7 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { * !0: failure */ -int __init -acpi_boot_table_init(void) +int __init acpi_boot_table_init(void) { int error; @@ -1108,7 +1091,7 @@ acpi_boot_table_init(void) * One exception: acpi=ht continues far enough to enumerate LAPICs */ if (acpi_disabled && !acpi_ht) - return 1; + return 1; /* * Initialize the ACPI boot-time table parser. @@ -1118,7 +1101,6 @@ acpi_boot_table_init(void) disable_acpi(); return error; } - #ifdef __i386__ check_acpi_pci(); #endif @@ -1142,7 +1124,6 @@ acpi_boot_table_init(void) return 0; } - int __init acpi_boot_init(void) { /* @@ -1150,7 +1131,7 @@ int __init acpi_boot_init(void) * One exception: acpi=ht continues far enough to enumerate LAPICs */ if (acpi_disabled && !acpi_ht) - return 1; + return 1; acpi_table_parse(ACPI_BOOT, acpi_parse_sbf); @@ -1168,4 +1149,3 @@ int __init acpi_boot_init(void) return 0; } - diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c index 726a5ca4b165..1ae2aeeda18b 100644 --- a/arch/i386/kernel/acpi/earlyquirk.c +++ b/arch/i386/kernel/acpi/earlyquirk.c @@ -7,45 +7,55 @@ #include <linux/pci.h> #include <asm/pci-direct.h> #include <asm/acpi.h> +#include <asm/apic.h> -static int __init check_bridge(int vendor, int device) +static int __init check_bridge(int vendor, int device) { /* According to Nvidia all timer overrides are bogus. Just ignore them all. */ - if (vendor == PCI_VENDOR_ID_NVIDIA) { - acpi_skip_timer_override = 1; + if (vendor == PCI_VENDOR_ID_NVIDIA) { + acpi_skip_timer_override = 1; } +#ifdef CONFIG_X86_LOCAL_APIC + /* + * ATI IXP chipsets get double timer interrupts. + * For now just do this for all ATI chipsets. + * FIXME: this needs to be checked for the non ACPI case too. + */ + if (vendor == PCI_VENDOR_ID_ATI) + disable_timer_pin_1 = 1; +#endif return 0; } - -void __init check_acpi_pci(void) -{ - int num,slot,func; + +void __init check_acpi_pci(void) +{ + int num, slot, func; /* Assume the machine supports type 1. If not it will always read ffffffff and should not have any side effect. */ /* Poor man's PCI discovery */ - for (num = 0; num < 32; num++) { - for (slot = 0; slot < 32; slot++) { - for (func = 0; func < 8; func++) { + for (num = 0; num < 32; num++) { + for (slot = 0; slot < 32; slot++) { + for (func = 0; func < 8; func++) { u32 class; u32 vendor; - class = read_pci_config(num,slot,func, + class = read_pci_config(num, slot, func, PCI_CLASS_REVISION); if (class == 0xffffffff) - break; + break; if ((class >> 16) != PCI_CLASS_BRIDGE_PCI) - continue; - - vendor = read_pci_config(num, slot, func, + continue; + + vendor = read_pci_config(num, slot, func, PCI_VENDOR_ID); - - if (check_bridge(vendor&0xffff, vendor >> 16)) - return; - } - + + if (check_bridge(vendor & 0xffff, vendor >> 16)) + return; + } + } } } diff --git a/arch/i386/kernel/acpi/sleep.c b/arch/i386/kernel/acpi/sleep.c index c1af93032ff3..1cb2b186a3af 100644 --- a/arch/i386/kernel/acpi/sleep.c +++ b/arch/i386/kernel/acpi/sleep.c @@ -20,12 +20,13 @@ extern void zap_low_mappings(void); extern unsigned long FASTCALL(acpi_copy_wakeup_routine(unsigned long)); -static void init_low_mapping(pgd_t *pgd, int pgd_limit) +static void init_low_mapping(pgd_t * pgd, int pgd_limit) { int pgd_ofs = 0; - while ((pgd_ofs < pgd_limit) && (pgd_ofs + USER_PTRS_PER_PGD < PTRS_PER_PGD)) { - set_pgd(pgd, *(pgd+USER_PTRS_PER_PGD)); + while ((pgd_ofs < pgd_limit) + && (pgd_ofs + USER_PTRS_PER_PGD < PTRS_PER_PGD)) { + set_pgd(pgd, *(pgd + USER_PTRS_PER_PGD)); pgd_ofs++, pgd++; } flush_tlb_all(); @@ -37,12 +38,13 @@ static void init_low_mapping(pgd_t *pgd, int pgd_limit) * Create an identity mapped page table and copy the wakeup routine to * low memory. */ -int acpi_save_state_mem (void) +int acpi_save_state_mem(void) { if (!acpi_wakeup_address) return 1; init_low_mapping(swapper_pg_dir, USER_PTRS_PER_PGD); - memcpy((void *) acpi_wakeup_address, &wakeup_start, &wakeup_end - &wakeup_start); + memcpy((void *)acpi_wakeup_address, &wakeup_start, + &wakeup_end - &wakeup_start); acpi_copy_wakeup_routine(acpi_wakeup_address); return 0; @@ -51,7 +53,7 @@ int acpi_save_state_mem (void) /* * acpi_restore_state - undo effects of acpi_save_state_mem */ -void acpi_restore_state_mem (void) +void acpi_restore_state_mem(void) { zap_low_mappings(); } @@ -67,7 +69,8 @@ void acpi_restore_state_mem (void) void __init acpi_reserve_bootmem(void) { if ((&wakeup_end - &wakeup_start) > PAGE_SIZE) { - printk(KERN_ERR "ACPI: Wakeup code way too big, S3 disabled.\n"); + printk(KERN_ERR + "ACPI: Wakeup code way too big, S3 disabled.\n"); return; } @@ -90,10 +93,8 @@ static int __init acpi_sleep_setup(char *str) return 1; } - __setup("acpi_sleep=", acpi_sleep_setup); - static __init int reset_videomode_after_s3(struct dmi_system_id *d) { acpi_video_flags |= 2; @@ -101,14 +102,14 @@ static __init int reset_videomode_after_s3(struct dmi_system_id *d) } static __initdata struct dmi_system_id acpisleep_dmi_table[] = { - { /* Reset video mode after returning from ACPI S3 sleep */ - .callback = reset_videomode_after_s3, - .ident = "Toshiba Satellite 4030cdt", - .matches = { - DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"), - }, - }, - { } + { /* Reset video mode after returning from ACPI S3 sleep */ + .callback = reset_videomode_after_s3, + .ident = "Toshiba Satellite 4030cdt", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"), + }, + }, + {} }; static int __init acpisleep_dmi_init(void) diff --git a/arch/i386/kernel/acpi/wakeup.S b/arch/i386/kernel/acpi/wakeup.S index 44d886c745ec..7c74fe0dc93c 100644 --- a/arch/i386/kernel/acpi/wakeup.S +++ b/arch/i386/kernel/acpi/wakeup.S @@ -304,12 +304,6 @@ ret_point: call restore_processor_state ret -ENTRY(do_suspend_lowlevel_s4bios) - call save_processor_state - call save_registers - call acpi_enter_sleep_state_s4bios - ret - ALIGN # saved registers saved_gdt: .long 0,0 diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 4553ffd94b1f..9ad43be9a01f 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -151,7 +151,7 @@ static char __devinit *table_lookup_model(struct cpuinfo_x86 *c) } -void __devinit get_cpu_vendor(struct cpuinfo_x86 *c, int early) +static void __devinit get_cpu_vendor(struct cpuinfo_x86 *c, int early) { char *v = c->x86_vendor_id; int i; @@ -613,8 +613,8 @@ void __devinit cpu_init(void) memcpy(thread->tls_array, &per_cpu(cpu_gdt_table, cpu), GDT_ENTRY_TLS_ENTRIES * 8); - __asm__ __volatile__("lgdt %0" : : "m" (cpu_gdt_descr[cpu])); - __asm__ __volatile__("lidt %0" : : "m" (idt_descr)); + load_gdt(&cpu_gdt_descr[cpu]); + load_idt(&idt_descr); /* * Delete NT @@ -642,12 +642,12 @@ void __devinit cpu_init(void) asm volatile ("xorl %eax, %eax; movl %eax, %fs; movl %eax, %gs"); /* Clear all 6 debug registers: */ - -#define CD(register) set_debugreg(0, register) - - CD(0); CD(1); CD(2); CD(3); /* no db4 and db5 */; CD(6); CD(7); - -#undef CD + set_debugreg(0, 0); + set_debugreg(0, 1); + set_debugreg(0, 2); + set_debugreg(0, 3); + set_debugreg(0, 6); + set_debugreg(0, 7); /* * Force FPU initialization: diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index 60a9e54dd20e..822c8ce9d1f1 100644 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -31,6 +31,7 @@ #include <linux/cpufreq.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> +#include <linux/compiler.h> #include <asm/io.h> #include <asm/delay.h> #include <asm/uaccess.h> @@ -57,6 +58,8 @@ static struct cpufreq_acpi_io *acpi_io_data[NR_CPUS]; static struct cpufreq_driver acpi_cpufreq_driver; +static unsigned int acpi_pstate_strict; + static int acpi_processor_write_port( u16 port, @@ -163,34 +166,44 @@ acpi_processor_set_performance ( } /* - * Then we read the 'status_register' and compare the value with the - * target state's 'status' to make sure the transition was successful. - * Note that we'll poll for up to 1ms (100 cycles of 10us) before - * giving up. + * Assume the write went through when acpi_pstate_strict is not used. + * As read status_register is an expensive operation and there + * are no specific error cases where an IO port write will fail. */ - - port = data->acpi_data.status_register.address; - bit_width = data->acpi_data.status_register.bit_width; - - dprintk("Looking for 0x%08x from port 0x%04x\n", - (u32) data->acpi_data.states[state].status, port); - - for (i=0; i<100; i++) { - ret = acpi_processor_read_port(port, bit_width, &value); - if (ret) { - dprintk("Invalid port width 0x%04x\n", bit_width); - retval = ret; - goto migrate_end; + if (acpi_pstate_strict) { + /* Then we read the 'status_register' and compare the value + * with the target state's 'status' to make sure the + * transition was successful. + * Note that we'll poll for up to 1ms (100 cycles of 10us) + * before giving up. + */ + + port = data->acpi_data.status_register.address; + bit_width = data->acpi_data.status_register.bit_width; + + dprintk("Looking for 0x%08x from port 0x%04x\n", + (u32) data->acpi_data.states[state].status, port); + + for (i=0; i<100; i++) { + ret = acpi_processor_read_port(port, bit_width, &value); + if (ret) { + dprintk("Invalid port width 0x%04x\n", bit_width); + retval = ret; + goto migrate_end; + } + if (value == (u32) data->acpi_data.states[state].status) + break; + udelay(10); } - if (value == (u32) data->acpi_data.states[state].status) - break; - udelay(10); + } else { + i = 0; + value = (u32) data->acpi_data.states[state].status; } /* notify cpufreq */ cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE); - if (value != (u32) data->acpi_data.states[state].status) { + if (unlikely(value != (u32) data->acpi_data.states[state].status)) { unsigned int tmp = cpufreq_freqs.new; cpufreq_freqs.new = cpufreq_freqs.old; cpufreq_freqs.old = tmp; @@ -537,6 +550,8 @@ acpi_cpufreq_exit (void) return; } +module_param(acpi_pstate_strict, uint, 0644); +MODULE_PARM_DESC(acpi_pstate_strict, "value 0 or non-zero. non-zero -> strict ACPI checks are performed during frequency changes."); late_initcall(acpi_cpufreq_init); module_exit(acpi_cpufreq_exit); diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 04e3563da4fe..8ef38544453c 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -64,8 +64,6 @@ static int dont_scale_voltage; #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg) -#define __hlt() __asm__ __volatile__("hlt": : :"memory") - /* Clock ratios multiplied by 10 */ static int clock_ratio[32]; static int eblcr_table[32]; @@ -168,11 +166,9 @@ static void do_powersaver(union msr_longhaul *longhaul, outb(0xFE,0x21); /* TMR0 only */ outb(0xFF,0x80); /* delay */ - local_irq_enable(); - - __hlt(); + safe_halt(); wrmsrl(MSR_VIA_LONGHAUL, longhaul->val); - __hlt(); + halt(); local_irq_disable(); @@ -251,9 +247,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index) bcr2.bits.CLOCKMUL = clock_ratio_index; local_irq_disable(); wrmsrl (MSR_VIA_BCR2, bcr2.val); - local_irq_enable(); - - __hlt(); + safe_halt(); /* Disable software clock multiplier */ rdmsrl (MSR_VIA_BCR2, bcr2.val); @@ -473,11 +467,11 @@ static void __init longhaul_setup_voltagescaling(void) } if (vrmrev==0) { - dprintk ("VRM 8.5 \n"); + dprintk ("VRM 8.5\n"); memcpy (voltage_table, vrm85scales, sizeof(voltage_table)); numvscales = (voltage_table[maxvid]-voltage_table[minvid])/25; } else { - dprintk ("Mobile VRM \n"); + dprintk ("Mobile VRM\n"); memcpy (voltage_table, mobilevrmscales, sizeof(voltage_table)); numvscales = (voltage_table[maxvid]-voltage_table[minvid])/5; } diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index 327a55d4d1c6..c397b6220430 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -259,7 +259,7 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy) if (model->op_points == NULL) { /* Matched a non-match */ - dprintk(KERN_INFO PFX "no table support for CPU model \"%s\": \n", + dprintk(KERN_INFO PFX "no table support for CPU model \"%s\"\n", cpu->x86_model_id); #ifndef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI dprintk(KERN_INFO PFX "try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled\n"); @@ -402,7 +402,7 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) for (i=0; i<p.state_count; i++) { if (p.states[i].control != p.states[i].status) { - dprintk("Different control (%x) and status values (%x)\n", + dprintk("Different control (%llu) and status values (%llu)\n", p.states[i].control, p.states[i].status); result = -EINVAL; goto err_unreg; @@ -415,7 +415,7 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) } if (p.states[i].core_frequency > p.states[0].core_frequency) { - dprintk("P%u has larger frequency (%u) than P0 (%u), skipping\n", i, + dprintk("P%u has larger frequency (%llu) than P0 (%llu), skipping\n", i, p.states[i].core_frequency, p.states[0].core_frequency); p.states[i].core_frequency = 0; continue; @@ -498,13 +498,6 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) if (cpu->x86_vendor != X86_VENDOR_INTEL || !cpu_has(cpu, X86_FEATURE_EST)) return -ENODEV; - for (i = 0; i < N_IDS; i++) - if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) - break; - - if (i != N_IDS) - centrino_cpu[policy->cpu] = &cpu_ids[i]; - if (is_const_loops_cpu(policy->cpu)) { centrino_driver.flags |= CPUFREQ_CONST_LOOPS; } @@ -513,6 +506,13 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) if (policy->cpu != 0) return -ENODEV; + for (i = 0; i < N_IDS; i++) + if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) + break; + + if (i != N_IDS) + centrino_cpu[policy->cpu] = &cpu_ids[i]; + if (!centrino_cpu[policy->cpu]) { dprintk(KERN_INFO PFX "found unsupported CPU with " "Enhanced SpeedStep: send /proc/cpuinfo to " diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c index b25fb6b635ae..2718fb6f6aba 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c @@ -99,7 +99,7 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) u32 function = GET_SPEEDSTEP_FREQS; if (!(ist_info.event & 0xFFFF)) { - dprintk("bug #1422 -- can't read freqs from BIOS\n", result); + dprintk("bug #1422 -- can't read freqs from BIOS\n"); return -ENODEV; } diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c index ba4b01138c8f..ff87cc22b323 100644 --- a/arch/i386/kernel/cpu/cyrix.c +++ b/arch/i386/kernel/cpu/cyrix.c @@ -132,11 +132,7 @@ static void __init set_cx86_memwb(void) setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04); /* set 'Not Write-through' */ cr0 = 0x20000000; - __asm__("movl %%cr0,%%eax\n\t" - "orl %0,%%eax\n\t" - "movl %%eax,%%cr0\n" - : : "r" (cr0) - :"ax"); + write_cr0(read_cr0() | cr0); /* CCR2 bit 2: lock NW bit and set WT1 */ setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14 ); } diff --git a/arch/i386/kernel/cpu/intel.c b/arch/i386/kernel/cpu/intel.c index a2c33c1a46c5..43601de0f633 100644 --- a/arch/i386/kernel/cpu/intel.c +++ b/arch/i386/kernel/cpu/intel.c @@ -82,16 +82,13 @@ static void __devinit Intel_errata_workarounds(struct cpuinfo_x86 *c) */ static int __devinit num_cpu_cores(struct cpuinfo_x86 *c) { - unsigned int eax; + unsigned int eax, ebx, ecx, edx; if (c->cpuid_level < 4) return 1; - __asm__("cpuid" - : "=a" (eax) - : "0" (4), "c" (0) - : "bx", "dx"); - + /* Intel has a non-standard dependency on %ecx for this CPUID level. */ + cpuid_count(4, 0, &eax, &ebx, &ecx, &edx); if (eax & 0x1f) return ((eax >> 26) + 1); else diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index 6c55b50cf048..9e0d5f83cb9f 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -305,6 +305,9 @@ static void __devinit cache_shared_cpu_map_setup(unsigned int cpu, int index) { struct _cpuid4_info *this_leaf; unsigned long num_threads_sharing; +#ifdef CONFIG_X86_HT + struct cpuinfo_x86 *c = cpu_data + cpu; +#endif this_leaf = CPUID4_INFO_IDX(cpu, index); num_threads_sharing = 1 + this_leaf->eax.split.num_threads_sharing; @@ -314,10 +317,12 @@ static void __devinit cache_shared_cpu_map_setup(unsigned int cpu, int index) #ifdef CONFIG_X86_HT else if (num_threads_sharing == smp_num_siblings) this_leaf->shared_cpu_map = cpu_sibling_map[cpu]; -#endif + else if (num_threads_sharing == (c->x86_num_cores * smp_num_siblings)) + this_leaf->shared_cpu_map = cpu_core_map[cpu]; else - printk(KERN_INFO "Number of CPUs sharing cache didn't match " + printk(KERN_DEBUG "Number of CPUs sharing cache didn't match " "any known set of CPUs\n"); +#endif } #else static void __init cache_shared_cpu_map_setup(unsigned int cpu, int index) {} diff --git a/arch/i386/kernel/cpu/mtrr/main.c b/arch/i386/kernel/cpu/mtrr/main.c index 764cac64e211..dd4ebd6af7e4 100644 --- a/arch/i386/kernel/cpu/mtrr/main.c +++ b/arch/i386/kernel/cpu/mtrr/main.c @@ -561,7 +561,7 @@ struct mtrr_value { static struct mtrr_value * mtrr_state; -static int mtrr_save(struct sys_device * sysdev, u32 state) +static int mtrr_save(struct sys_device * sysdev, pm_message_t state) { int i; int size = num_var_ranges * sizeof(struct mtrr_value); diff --git a/arch/i386/kernel/crash.c b/arch/i386/kernel/crash.c index e5fab12f7926..913be77bb844 100644 --- a/arch/i386/kernel/crash.c +++ b/arch/i386/kernel/crash.c @@ -153,7 +153,7 @@ static int crash_nmi_callback(struct pt_regs *regs, int cpu) disable_local_APIC(); atomic_dec(&waiting_for_crash_ipi); /* Assume hlt works */ - __asm__("hlt"); + halt(); for(;;); return 1; diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c index a3cdf894302b..58516e2ac172 100644 --- a/arch/i386/kernel/dmi_scan.c +++ b/arch/i386/kernel/dmi_scan.c @@ -6,32 +6,28 @@ #include <linux/bootmem.h> -struct dmi_header { - u8 type; - u8 length; - u16 handle; -}; - -#undef DMI_DEBUG - -#ifdef DMI_DEBUG -#define dmi_printk(x) printk x -#else -#define dmi_printk(x) -#endif - static char * __init dmi_string(struct dmi_header *dm, u8 s) { u8 *bp = ((u8 *) dm) + dm->length; + char *str = ""; - if (!s) - return ""; - s--; - while (s > 0 && *bp) { - bp += strlen(bp) + 1; + if (s) { s--; - } - return bp; + while (s > 0 && *bp) { + bp += strlen(bp) + 1; + s--; + } + + if (*bp != 0) { + str = alloc_bootmem(strlen(bp) + 1); + if (str != NULL) + strcpy(str, bp); + else + printk(KERN_ERR "dmi_string: out of memory.\n"); + } + } + + return str; } /* @@ -84,69 +80,76 @@ static int __init dmi_checksum(u8 *buf) return sum == 0; } -static int __init dmi_iterate(void (*decode)(struct dmi_header *)) +static char *dmi_ident[DMI_STRING_MAX]; +static LIST_HEAD(dmi_devices); + +/* + * Save a DMI string + */ +static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string) { - u8 buf[15]; - char __iomem *p, *q; + char *p, *d = (char*) dm; - /* - * no iounmap() for that ioremap(); it would be a no-op, but it's - * so early in setup that sucker gets confused into doing what - * it shouldn't if we actually call it. - */ - p = ioremap(0xF0000, 0x10000); + if (dmi_ident[slot]) + return; + + p = dmi_string(dm, d[string]); if (p == NULL) - return -1; + return; - for (q = p; q < p + 0x10000; q += 16) { - memcpy_fromio(buf, q, 15); - if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) { - u16 num = (buf[13] << 8) | buf[12]; - u16 len = (buf[7] << 8) | buf[6]; - u32 base = (buf[11] << 24) | (buf[10] << 16) | - (buf[9] << 8) | buf[8]; + dmi_ident[slot] = p; +} - /* - * DMI version 0.0 means that the real version is taken from - * the SMBIOS version, which we don't know at this point. - */ - if (buf[14] != 0) - printk(KERN_INFO "DMI %d.%d present.\n", - buf[14] >> 4, buf[14] & 0xF); - else - printk(KERN_INFO "DMI present.\n"); +static void __init dmi_save_devices(struct dmi_header *dm) +{ + int i, count = (dm->length - sizeof(struct dmi_header)) / 2; + struct dmi_device *dev; + + for (i = 0; i < count; i++) { + char *d = ((char *) dm) + (i * 2); - dmi_printk((KERN_INFO "%d structures occupying %d bytes.\n", - num, len)); - dmi_printk((KERN_INFO "DMI table at 0x%08X.\n", base)); + /* Skip disabled device */ + if ((*d & 0x80) == 0) + continue; - if (dmi_table(base,len, num, decode) == 0) - return 0; + dev = alloc_bootmem(sizeof(*dev)); + if (!dev) { + printk(KERN_ERR "dmi_save_devices: out of memory.\n"); + break; } + + dev->type = *d++ & 0x7f; + dev->name = dmi_string(dm, *d); + dev->device_data = NULL; + + list_add(&dev->list, &dmi_devices); } - return -1; } -static char *dmi_ident[DMI_STRING_MAX]; - -/* - * Save a DMI string - */ -static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string) +static void __init dmi_save_ipmi_device(struct dmi_header *dm) { - char *d = (char*)dm; - char *p = dmi_string(dm, d[string]); + struct dmi_device *dev; + void * data; - if (p == NULL || *p == 0) + data = alloc_bootmem(dm->length); + if (data == NULL) { + printk(KERN_ERR "dmi_save_ipmi_device: out of memory.\n"); return; - if (dmi_ident[slot]) + } + + memcpy(data, dm, dm->length); + + dev = alloc_bootmem(sizeof(*dev)); + if (!dev) { + printk(KERN_ERR "dmi_save_ipmi_device: out of memory.\n"); return; + } - dmi_ident[slot] = alloc_bootmem(strlen(p) + 1); - if(dmi_ident[slot]) - strcpy(dmi_ident[slot], p); - else - printk(KERN_ERR "dmi_save_ident: out of memory.\n"); + dev->type = DMI_DEV_TYPE_IPMI; + dev->name = "IPMI controller"; + dev->device_data = data; + + list_add(&dev->list, &dmi_devices); } /* @@ -156,42 +159,69 @@ static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string) */ static void __init dmi_decode(struct dmi_header *dm) { - u8 *data __attribute__((__unused__)) = (u8 *)dm; - switch(dm->type) { - case 0: - dmi_printk(("BIOS Vendor: %s\n", dmi_string(dm, data[4]))); + case 0: /* BIOS Information */ dmi_save_ident(dm, DMI_BIOS_VENDOR, 4); - dmi_printk(("BIOS Version: %s\n", dmi_string(dm, data[5]))); dmi_save_ident(dm, DMI_BIOS_VERSION, 5); - dmi_printk(("BIOS Release: %s\n", dmi_string(dm, data[8]))); dmi_save_ident(dm, DMI_BIOS_DATE, 8); break; - case 1: - dmi_printk(("System Vendor: %s\n", dmi_string(dm, data[4]))); + case 1: /* System Information */ dmi_save_ident(dm, DMI_SYS_VENDOR, 4); - dmi_printk(("Product Name: %s\n", dmi_string(dm, data[5]))); dmi_save_ident(dm, DMI_PRODUCT_NAME, 5); - dmi_printk(("Version: %s\n", dmi_string(dm, data[6]))); dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6); - dmi_printk(("Serial Number: %s\n", dmi_string(dm, data[7]))); dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7); break; - case 2: - dmi_printk(("Board Vendor: %s\n", dmi_string(dm, data[4]))); + case 2: /* Base Board Information */ dmi_save_ident(dm, DMI_BOARD_VENDOR, 4); - dmi_printk(("Board Name: %s\n", dmi_string(dm, data[5]))); dmi_save_ident(dm, DMI_BOARD_NAME, 5); - dmi_printk(("Board Version: %s\n", dmi_string(dm, data[6]))); dmi_save_ident(dm, DMI_BOARD_VERSION, 6); break; + case 10: /* Onboard Devices Information */ + dmi_save_devices(dm); + break; + case 38: /* IPMI Device Information */ + dmi_save_ipmi_device(dm); } } void __init dmi_scan_machine(void) { - if (dmi_iterate(dmi_decode)) - printk(KERN_INFO "DMI not present.\n"); + u8 buf[15]; + char __iomem *p, *q; + + /* + * no iounmap() for that ioremap(); it would be a no-op, but it's + * so early in setup that sucker gets confused into doing what + * it shouldn't if we actually call it. + */ + p = ioremap(0xF0000, 0x10000); + if (p == NULL) + goto out; + + for (q = p; q < p + 0x10000; q += 16) { + memcpy_fromio(buf, q, 15); + if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) { + u16 num = (buf[13] << 8) | buf[12]; + u16 len = (buf[7] << 8) | buf[6]; + u32 base = (buf[11] << 24) | (buf[10] << 16) | + (buf[9] << 8) | buf[8]; + + /* + * DMI version 0.0 means that the real version is taken from + * the SMBIOS version, which we don't know at this point. + */ + if (buf[14] != 0) + printk(KERN_INFO "DMI %d.%d present.\n", + buf[14] >> 4, buf[14] & 0xF); + else + printk(KERN_INFO "DMI present.\n"); + + if (dmi_table(base,len, num, dmi_decode) == 0) + return; + } + } + +out: printk(KERN_INFO "DMI not present.\n"); } @@ -218,9 +248,9 @@ int dmi_check_system(struct dmi_system_id *list) /* No match */ goto fail; } + count++; if (d->callback && d->callback(d)) break; - count++; fail: d++; } @@ -240,3 +270,32 @@ char *dmi_get_system_info(int field) return dmi_ident[field]; } EXPORT_SYMBOL(dmi_get_system_info); + +/** + * dmi_find_device - find onboard device by type/name + * @type: device type or %DMI_DEV_TYPE_ANY to match all device types + * @desc: device name string or %NULL to match all + * @from: previous device found in search, or %NULL for new search. + * + * Iterates through the list of known onboard devices. If a device is + * found with a matching @vendor and @device, a pointer to its device + * structure is returned. Otherwise, %NULL is returned. + * A new search is initiated by passing %NULL to the @from argument. + * If @from is not %NULL, searches continue from next device. + */ +struct dmi_device * dmi_find_device(int type, const char *name, + struct dmi_device *from) +{ + struct list_head *d, *head = from ? &from->list : &dmi_devices; + + for(d = head->next; d != &dmi_devices; d = d->next) { + struct dmi_device *dev = list_entry(d, struct dmi_device, list); + + if (((type == DMI_DEV_TYPE_ANY) || (dev->type == type)) && + ((name == NULL) || (strcmp(dev->name, name) == 0))) + return dev; + } + + return NULL; +} +EXPORT_SYMBOL(dmi_find_device); diff --git a/arch/i386/kernel/doublefault.c b/arch/i386/kernel/doublefault.c index 789af3e9fb1f..5edb1d379add 100644 --- a/arch/i386/kernel/doublefault.c +++ b/arch/i386/kernel/doublefault.c @@ -20,7 +20,7 @@ static void doublefault_fn(void) struct Xgt_desc_struct gdt_desc = {0, 0}; unsigned long gdt, tss; - __asm__ __volatile__("sgdt %0": "=m" (gdt_desc): :"memory"); + store_gdt(&gdt_desc); gdt = gdt_desc.address; printk("double fault, gdt at %08lx [%d bytes]\n", gdt, gdt_desc.size); diff --git a/arch/i386/kernel/efi.c b/arch/i386/kernel/efi.c index 385883ea8c19..ecad519fd395 100644 --- a/arch/i386/kernel/efi.c +++ b/arch/i386/kernel/efi.c @@ -79,7 +79,7 @@ static void efi_call_phys_prelog(void) * directory. If I have PSE, I just need to duplicate one entry in * page directory. */ - __asm__ __volatile__("movl %%cr4, %0":"=r"(cr4)); + cr4 = read_cr4(); if (cr4 & X86_CR4_PSE) { efi_bak_pg_dir_pointer[0].pgd = @@ -104,8 +104,7 @@ static void efi_call_phys_prelog(void) local_flush_tlb(); cpu_gdt_descr[0].address = __pa(cpu_gdt_descr[0].address); - __asm__ __volatile__("lgdt %0":"=m" - (*(struct Xgt_desc_struct *) __pa(&cpu_gdt_descr[0]))); + load_gdt((struct Xgt_desc_struct *) __pa(&cpu_gdt_descr[0])); } static void efi_call_phys_epilog(void) @@ -114,8 +113,8 @@ static void efi_call_phys_epilog(void) cpu_gdt_descr[0].address = (unsigned long) __va(cpu_gdt_descr[0].address); - __asm__ __volatile__("lgdt %0":"=m"(cpu_gdt_descr)); - __asm__ __volatile__("movl %%cr4, %0":"=r"(cr4)); + load_gdt(&cpu_gdt_descr[0]); + cr4 = read_cr4(); if (cr4 & X86_CR4_PSE) { swapper_pg_dir[pgd_index(0)].pgd = @@ -233,22 +232,23 @@ void __init efi_map_memmap(void) { memmap.map = NULL; - memmap.map = (efi_memory_desc_t *) - bt_ioremap((unsigned long) memmap.phys_map, - (memmap.nr_map * sizeof(efi_memory_desc_t))); - + memmap.map = bt_ioremap((unsigned long) memmap.phys_map, + (memmap.nr_map * memmap.desc_size)); if (memmap.map == NULL) printk(KERN_ERR PFX "Could not remap the EFI memmap!\n"); + + memmap.map_end = memmap.map + (memmap.nr_map * memmap.desc_size); } #if EFI_DEBUG static void __init print_efi_memmap(void) { efi_memory_desc_t *md; + void *p; int i; - for (i = 0; i < memmap.nr_map; i++) { - md = &memmap.map[i]; + for (p = memmap.map, i = 0; p < memmap.map_end; p += memmap.desc_size, i++) { + md = p; printk(KERN_INFO "mem%02u: type=%u, attr=0x%llx, " "range=[0x%016llx-0x%016llx) (%lluMB)\n", i, md->type, md->attribute, md->phys_addr, @@ -271,10 +271,10 @@ void efi_memmap_walk(efi_freemem_callback_t callback, void *arg) } prev, curr; efi_memory_desc_t *md; unsigned long start, end; - int i; + void *p; - for (i = 0; i < memmap.nr_map; i++) { - md = &memmap.map[i]; + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { + md = p; if ((md->num_pages == 0) || (!is_available_memory(md))) continue; @@ -325,6 +325,7 @@ void __init efi_init(void) memmap.phys_map = EFI_MEMMAP; memmap.nr_map = EFI_MEMMAP_SIZE/EFI_MEMDESC_SIZE; memmap.desc_version = EFI_MEMDESC_VERSION; + memmap.desc_size = EFI_MEMDESC_SIZE; efi.systab = (efi_system_table_t *) boot_ioremap((unsigned long) efi_phys.systab, @@ -428,22 +429,30 @@ void __init efi_init(void) printk(KERN_ERR PFX "Could not map the runtime service table!\n"); /* Map the EFI memory map for use until paging_init() */ - - memmap.map = (efi_memory_desc_t *) - boot_ioremap((unsigned long) EFI_MEMMAP, EFI_MEMMAP_SIZE); - + memmap.map = boot_ioremap((unsigned long) EFI_MEMMAP, EFI_MEMMAP_SIZE); if (memmap.map == NULL) printk(KERN_ERR PFX "Could not map the EFI memory map!\n"); - if (EFI_MEMDESC_SIZE != sizeof(efi_memory_desc_t)) { - printk(KERN_WARNING PFX "Warning! Kernel-defined memdesc doesn't " - "match the one from EFI!\n"); - } + memmap.map_end = memmap.map + (memmap.nr_map * memmap.desc_size); + #if EFI_DEBUG print_efi_memmap(); #endif } +static inline void __init check_range_for_systab(efi_memory_desc_t *md) +{ + if (((unsigned long)md->phys_addr <= (unsigned long)efi_phys.systab) && + ((unsigned long)efi_phys.systab < md->phys_addr + + ((unsigned long)md->num_pages << EFI_PAGE_SHIFT))) { + unsigned long addr; + + addr = md->virt_addr - md->phys_addr + + (unsigned long)efi_phys.systab; + efi.systab = (efi_system_table_t *)addr; + } +} + /* * This function will switch the EFI runtime services to virtual mode. * Essentially, look through the EFI memmap and map every region that @@ -457,43 +466,32 @@ void __init efi_enter_virtual_mode(void) { efi_memory_desc_t *md; efi_status_t status; - int i; + void *p; efi.systab = NULL; - for (i = 0; i < memmap.nr_map; i++) { - md = &memmap.map[i]; + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { + md = p; - if (md->attribute & EFI_MEMORY_RUNTIME) { - md->virt_addr = - (unsigned long)ioremap(md->phys_addr, - md->num_pages << EFI_PAGE_SHIFT); - if (!(unsigned long)md->virt_addr) { - printk(KERN_ERR PFX "ioremap of 0x%lX failed\n", - (unsigned long)md->phys_addr); - } + if (!(md->attribute & EFI_MEMORY_RUNTIME)) + continue; - if (((unsigned long)md->phys_addr <= - (unsigned long)efi_phys.systab) && - ((unsigned long)efi_phys.systab < - md->phys_addr + - ((unsigned long)md->num_pages << - EFI_PAGE_SHIFT))) { - unsigned long addr; - - addr = md->virt_addr - md->phys_addr + - (unsigned long)efi_phys.systab; - efi.systab = (efi_system_table_t *)addr; - } + md->virt_addr = (unsigned long)ioremap(md->phys_addr, + md->num_pages << EFI_PAGE_SHIFT); + if (!(unsigned long)md->virt_addr) { + printk(KERN_ERR PFX "ioremap of 0x%lX failed\n", + (unsigned long)md->phys_addr); } + /* update the virtual address of the EFI system table */ + check_range_for_systab(md); } if (!efi.systab) BUG(); status = phys_efi_set_virtual_address_map( - sizeof(efi_memory_desc_t) * memmap.nr_map, - sizeof(efi_memory_desc_t), + memmap.desc_size * memmap.nr_map, + memmap.desc_size, memmap.desc_version, memmap.phys_map); @@ -533,10 +531,10 @@ efi_initialize_iomem_resources(struct resource *code_resource, { struct resource *res; efi_memory_desc_t *md; - int i; + void *p; - for (i = 0; i < memmap.nr_map; i++) { - md = &memmap.map[i]; + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { + md = p; if ((md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT)) > 0x100000000ULL) @@ -613,10 +611,10 @@ efi_initialize_iomem_resources(struct resource *code_resource, u32 efi_mem_type(unsigned long phys_addr) { efi_memory_desc_t *md; - int i; + void *p; - for (i = 0; i < memmap.nr_map; i++) { - md = &memmap.map[i]; + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { + md = p; if ((md->phys_addr <= phys_addr) && (phys_addr < (md->phys_addr + (md-> num_pages << EFI_PAGE_SHIFT)) )) return md->type; @@ -627,10 +625,10 @@ u32 efi_mem_type(unsigned long phys_addr) u64 efi_mem_attributes(unsigned long phys_addr) { efi_memory_desc_t *md; - int i; + void *p; - for (i = 0; i < memmap.nr_map; i++) { - md = &memmap.map[i]; + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { + md = p; if ((md->phys_addr <= phys_addr) && (phys_addr < (md->phys_addr + (md-> num_pages << EFI_PAGE_SHIFT)) )) return md->attribute; diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S index a991d4e5edd2..9e24f7b207ee 100644 --- a/arch/i386/kernel/entry.S +++ b/arch/i386/kernel/entry.S @@ -203,7 +203,7 @@ sysenter_past_esp: GET_THREAD_INFO(%ebp) /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */ - testw $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),TI_flags(%ebp) + testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp) jnz syscall_trace_entry cmpl $(nr_syscalls), %eax jae syscall_badsys @@ -226,9 +226,9 @@ ENTRY(system_call) pushl %eax # save orig_eax SAVE_ALL GET_THREAD_INFO(%ebp) - # system call tracing in operation + # system call tracing in operation / emulation /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */ - testw $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),TI_flags(%ebp) + testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp) jnz syscall_trace_entry cmpl $(nr_syscalls), %eax jae syscall_badsys @@ -319,7 +319,7 @@ work_notifysig: # deal with pending signals and # vm86-space xorl %edx, %edx call do_notify_resume - jmp restore_all + jmp resume_userspace ALIGN work_notifysig_v86: @@ -329,7 +329,7 @@ work_notifysig_v86: movl %eax, %esp xorl %edx, %edx call do_notify_resume - jmp restore_all + jmp resume_userspace # perform syscall exit tracing ALIGN @@ -338,6 +338,9 @@ syscall_trace_entry: movl %esp, %eax xorl %edx,%edx call do_syscall_trace + cmpl $0, %eax + jne resume_userspace # ret != 0 -> running under PTRACE_SYSEMU, + # so must skip actual syscall movl ORIG_EAX(%esp), %eax cmpl $(nr_syscalls), %eax jnae syscall_call @@ -504,7 +507,7 @@ label: \ pushl $__KERNEL_CS; \ pushl $sysenter_past_esp -ENTRY(debug) +KPROBE_ENTRY(debug) cmpl $sysenter_entry,(%esp) jne debug_stack_correct FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn) @@ -515,7 +518,7 @@ debug_stack_correct: movl %esp,%eax # pt_regs pointer call do_debug jmp ret_from_exception - + .previous .text /* * NMI is doubly nasty. It can happen _while_ we're handling * a debug fault, and the debug fault hasn't yet been able to @@ -588,13 +591,14 @@ nmi_16bit_stack: .long 1b,iret_exc .previous -ENTRY(int3) +KPROBE_ENTRY(int3) pushl $-1 # mark this as an int SAVE_ALL xorl %edx,%edx # zero error code movl %esp,%eax # pt_regs pointer call do_int3 jmp ret_from_exception + .previous .text ENTRY(overflow) pushl $0 @@ -628,17 +632,19 @@ ENTRY(stack_segment) pushl $do_stack_segment jmp error_code -ENTRY(general_protection) +KPROBE_ENTRY(general_protection) pushl $do_general_protection jmp error_code + .previous .text ENTRY(alignment_check) pushl $do_alignment_check jmp error_code -ENTRY(page_fault) +KPROBE_ENTRY(page_fault) pushl $do_page_fault jmp error_code + .previous .text #ifdef CONFIG_X86_MCE ENTRY(machine_check) diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index 4477bb107098..e437fb367498 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -17,7 +17,7 @@ #include <asm/desc.h> #include <asm/cache.h> #include <asm/thread_info.h> -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> #include <asm/setup.h> /* @@ -77,6 +77,32 @@ ENTRY(startup_32) subl %edi,%ecx shrl $2,%ecx rep ; stosl +/* + * Copy bootup parameters out of the way. + * Note: %esi still has the pointer to the real-mode data. + * With the kexec as boot loader, parameter segment might be loaded beyond + * kernel image and might not even be addressable by early boot page tables. + * (kexec on panic case). Hence copy out the parameters before initializing + * page tables. + */ + movl $(boot_params - __PAGE_OFFSET),%edi + movl $(PARAM_SIZE/4),%ecx + cld + rep + movsl + movl boot_params - __PAGE_OFFSET + NEW_CL_POINTER,%esi + andl %esi,%esi + jnz 2f # New command line protocol + cmpw $(OLD_CL_MAGIC),OLD_CL_MAGIC_ADDR + jne 1f + movzwl OLD_CL_OFFSET,%esi + addl $(OLD_CL_BASE_ADDR),%esi +2: + movl $(saved_command_line - __PAGE_OFFSET),%edi + movl $(COMMAND_LINE_SIZE/4),%ecx + rep + movsl +1: /* * Initialize page tables. This creates a PDE and a set of page @@ -214,28 +240,6 @@ ENTRY(startup_32_smp) */ call setup_idt -/* - * Copy bootup parameters out of the way. - * Note: %esi still has the pointer to the real-mode data. - */ - movl $boot_params,%edi - movl $(PARAM_SIZE/4),%ecx - cld - rep - movsl - movl boot_params+NEW_CL_POINTER,%esi - andl %esi,%esi - jnz 2f # New command line protocol - cmpw $(OLD_CL_MAGIC),OLD_CL_MAGIC_ADDR - jne 1f - movzwl OLD_CL_OFFSET,%esi - addl $(OLD_CL_BASE_ADDR),%esi -2: - movl $saved_command_line,%edi - movl $(COMMAND_LINE_SIZE/4),%ecx - rep - movsl -1: checkCPUtype: movl $-1,X86_CPUID # -1 for no CPUID initially diff --git a/arch/i386/kernel/i8237.c b/arch/i386/kernel/i8237.c new file mode 100644 index 000000000000..c36d1c006c2f --- /dev/null +++ b/arch/i386/kernel/i8237.c @@ -0,0 +1,67 @@ +/* + * i8237.c: 8237A DMA controller suspend functions. + * + * Written by Pierre Ossman, 2005. + */ + +#include <linux/init.h> +#include <linux/sysdev.h> + +#include <asm/dma.h> + +/* + * This module just handles suspend/resume issues with the + * 8237A DMA controller (used for ISA and LPC). + * Allocation is handled in kernel/dma.c and normal usage is + * in asm/dma.h. + */ + +static int i8237A_resume(struct sys_device *dev) +{ + unsigned long flags; + int i; + + flags = claim_dma_lock(); + + dma_outb(DMA1_RESET_REG, 0); + dma_outb(DMA2_RESET_REG, 0); + + for (i = 0;i < 8;i++) { + set_dma_addr(i, 0x000000); + /* DMA count is a bit weird so this is not 0 */ + set_dma_count(i, 1); + } + + /* Enable cascade DMA or channel 0-3 won't work */ + enable_dma(4); + + release_dma_lock(flags); + + return 0; +} + +static int i8237A_suspend(struct sys_device *dev, pm_message_t state) +{ + return 0; +} + +static struct sysdev_class i8237_sysdev_class = { + set_kset_name("i8237"), + .suspend = i8237A_suspend, + .resume = i8237A_resume, +}; + +static struct sys_device device_i8237A = { + .id = 0, + .cls = &i8237_sysdev_class, +}; + +static int __init i8237A_init_sysfs(void) +{ + int error = sysdev_class_register(&i8237_sysdev_class); + if (!error) + error = sysdev_register(&device_i8237A); + return error; +} + +device_initcall(i8237A_init_sysfs); diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 6578f40bd501..378313b0cce9 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -33,6 +33,7 @@ #include <linux/acpi.h> #include <linux/module.h> #include <linux/sysdev.h> + #include <asm/io.h> #include <asm/smp.h> #include <asm/desc.h> @@ -59,6 +60,8 @@ int sis_apic_bug = -1; */ int nr_ioapic_registers[MAX_IO_APICS]; +int disable_timer_pin_1 __initdata; + /* * Rough estimation of how many shared IRQs there are, can * be changed anytime. @@ -77,7 +80,7 @@ static struct irq_pin_list { int apic, pin, next; } irq_2_pin[PIN_MAP_SIZE]; -int vector_irq[NR_VECTORS] = { [0 ... NR_VECTORS - 1] = -1}; +int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1}; #ifdef CONFIG_PCI_MSI #define vector_to_irq(vector) \ (platform_legacy_irq(vector) ? vector : vector_irq[vector]) @@ -222,13 +225,21 @@ static void clear_IO_APIC (void) clear_IO_APIC_pin(apic, pin); } +#ifdef CONFIG_SMP static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) { unsigned long flags; int pin; struct irq_pin_list *entry = irq_2_pin + irq; unsigned int apicid_value; + cpumask_t tmp; + cpus_and(tmp, cpumask, cpu_online_map); + if (cpus_empty(tmp)) + tmp = TARGET_CPUS; + + cpus_and(cpumask, tmp, CPU_MASK_ALL); + apicid_value = cpu_mask_to_apicid(cpumask); /* Prepare to do the io_apic_write */ apicid_value = apicid_value << 24; @@ -242,6 +253,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) break; entry = irq_2_pin + entry->next; } + set_irq_info(irq, cpumask); spin_unlock_irqrestore(&ioapic_lock, flags); } @@ -259,7 +271,6 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) # define Dprintk(x...) # endif -cpumask_t __cacheline_aligned pending_irq_balance_cpumask[NR_IRQS]; #define IRQBALANCE_CHECK_ARCH -999 static int irqbalance_disabled = IRQBALANCE_CHECK_ARCH; @@ -328,12 +339,7 @@ static inline void balance_irq(int cpu, int irq) cpus_and(allowed_mask, cpu_online_map, irq_affinity[irq]); new_cpu = move(cpu, allowed_mask, now, 1); if (cpu != new_cpu) { - irq_desc_t *desc = irq_desc + irq; - unsigned long flags; - - spin_lock_irqsave(&desc->lock, flags); - pending_irq_balance_cpumask[irq] = cpumask_of_cpu(new_cpu); - spin_unlock_irqrestore(&desc->lock, flags); + set_pending_irq(irq, cpumask_of_cpu(new_cpu)); } } @@ -528,16 +534,12 @@ tryanotherirq: cpus_and(tmp, target_cpu_mask, allowed_mask); if (!cpus_empty(tmp)) { - irq_desc_t *desc = irq_desc + selected_irq; - unsigned long flags; Dprintk("irq = %d moved to cpu = %d\n", selected_irq, min_loaded); /* mark for change destination */ - spin_lock_irqsave(&desc->lock, flags); - pending_irq_balance_cpumask[selected_irq] = - cpumask_of_cpu(min_loaded); - spin_unlock_irqrestore(&desc->lock, flags); + set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded)); + /* Since we made a change, come back sooner to * check for more variation. */ @@ -568,12 +570,12 @@ static int balanced_irq(void *unused) /* push everything to CPU 0 to give us a starting point. */ for (i = 0 ; i < NR_IRQS ; i++) { - pending_irq_balance_cpumask[i] = cpumask_of_cpu(0); + pending_irq_cpumask[i] = cpumask_of_cpu(0); + set_pending_irq(i, cpumask_of_cpu(0)); } for ( ; ; ) { - set_current_state(TASK_INTERRUPTIBLE); - time_remaining = schedule_timeout(time_remaining); + time_remaining = schedule_timeout_interruptible(time_remaining); try_to_freeze(); if (time_after(jiffies, prev_balance_time+balanced_irq_interval)) { @@ -647,20 +649,9 @@ int __init irqbalance_disable(char *str) __setup("noirqbalance", irqbalance_disable); -static inline void move_irq(int irq) -{ - /* note - we hold the desc->lock */ - if (unlikely(!cpus_empty(pending_irq_balance_cpumask[irq]))) { - set_ioapic_affinity_irq(irq, pending_irq_balance_cpumask[irq]); - cpus_clear(pending_irq_balance_cpumask[irq]); - } -} - late_initcall(balanced_irq_init); - -#else /* !CONFIG_IRQBALANCE */ -static inline void move_irq(int irq) { } #endif /* CONFIG_IRQBALANCE */ +#endif /* CONFIG_SMP */ #ifndef CONFIG_SMP void fastcall send_IPI_self(int vector) @@ -820,6 +811,7 @@ EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); * we need to reprogram the ioredtbls to cater for the cpus which have come online * so mask in all cases should simply be TARGET_CPUS */ +#ifdef CONFIG_SMP void __init setup_ioapic_dest(void) { int pin, ioapic, irq, irq_entry; @@ -838,6 +830,7 @@ void __init setup_ioapic_dest(void) } } +#endif /* * EISA Edge/Level control register, ELCR @@ -1127,7 +1120,7 @@ static inline int IO_APIC_irq_trigger(int irq) } /* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */ -u8 irq_vector[NR_IRQ_VECTORS] = { FIRST_DEVICE_VECTOR , 0 }; +u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 }; int assign_irq_vector(int irq) { @@ -1249,6 +1242,7 @@ static void __init setup_IO_APIC_irqs(void) spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); + set_native_irq_info(irq, TARGET_CPUS); spin_unlock_irqrestore(&ioapic_lock, flags); } } @@ -1641,9 +1635,9 @@ void disable_IO_APIC(void) clear_IO_APIC(); /* - * If the i82559 is routed through an IOAPIC + * If the i8259 is routed through an IOAPIC * Put that IOAPIC in virtual wire mode - * so legacy interrups can be delivered. + * so legacy interrupts can be delivered. */ pin = find_isa_irq_pin(0, mp_ExtINT); if (pin != -1) { @@ -1944,6 +1938,7 @@ static void ack_edge_ioapic_vector(unsigned int vector) { int irq = vector_to_irq(vector); + move_irq(vector); ack_edge_ioapic_irq(irq); } @@ -1958,6 +1953,7 @@ static void end_level_ioapic_vector (unsigned int vector) { int irq = vector_to_irq(vector); + move_irq(vector); end_level_ioapic_irq(irq); } @@ -1975,14 +1971,17 @@ static void unmask_IO_APIC_vector (unsigned int vector) unmask_IO_APIC_irq(irq); } +#ifdef CONFIG_SMP static void set_ioapic_affinity_vector (unsigned int vector, cpumask_t cpu_mask) { int irq = vector_to_irq(vector); + set_native_irq_info(vector, cpu_mask); set_ioapic_affinity_irq(irq, cpu_mask); } #endif +#endif /* * Level and edge triggered IO-APIC interrupts need different handling, @@ -1992,7 +1991,7 @@ static void set_ioapic_affinity_vector (unsigned int vector, * edge-triggered handler, without risking IRQ storms and other ugly * races. */ -static struct hw_interrupt_type ioapic_edge_type = { +static struct hw_interrupt_type ioapic_edge_type __read_mostly = { .typename = "IO-APIC-edge", .startup = startup_edge_ioapic, .shutdown = shutdown_edge_ioapic, @@ -2000,10 +1999,12 @@ static struct hw_interrupt_type ioapic_edge_type = { .disable = disable_edge_ioapic, .ack = ack_edge_ioapic, .end = end_edge_ioapic, +#ifdef CONFIG_SMP .set_affinity = set_ioapic_affinity, +#endif }; -static struct hw_interrupt_type ioapic_level_type = { +static struct hw_interrupt_type ioapic_level_type __read_mostly = { .typename = "IO-APIC-level", .startup = startup_level_ioapic, .shutdown = shutdown_level_ioapic, @@ -2011,7 +2012,9 @@ static struct hw_interrupt_type ioapic_level_type = { .disable = disable_level_ioapic, .ack = mask_and_ack_level_ioapic, .end = end_level_ioapic, +#ifdef CONFIG_SMP .set_affinity = set_ioapic_affinity, +#endif }; static inline void init_IO_APIC_traps(void) @@ -2074,7 +2077,7 @@ static void ack_lapic_irq (unsigned int irq) static void end_lapic_irq (unsigned int i) { /* nothing */ } -static struct hw_interrupt_type lapic_irq_type = { +static struct hw_interrupt_type lapic_irq_type __read_mostly = { .typename = "local-APIC-edge", .startup = NULL, /* startup_irq() not used for IRQ0 */ .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */ @@ -2210,6 +2213,8 @@ static inline void check_timer(void) setup_nmi(); enable_8259A_irq(0); } + if (disable_timer_pin_1 > 0) + clear_IO_APIC_pin(0, pin1); return; } clear_IO_APIC_pin(0, pin1); @@ -2421,7 +2426,7 @@ device_initcall(ioapic_init_sysfs); ACPI-based IOAPIC Configuration -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI int __init io_apic_get_unique_id (int ioapic, int apic_id) { @@ -2569,9 +2574,10 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1)); io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0)); + set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS); spin_unlock_irqrestore(&ioapic_lock, flags); return 0; } -#endif /*CONFIG_ACPI_BOOT*/ +#endif /* CONFIG_ACPI */ diff --git a/arch/i386/kernel/ioport.c b/arch/i386/kernel/ioport.c index 8b25160393c1..f2b37654777f 100644 --- a/arch/i386/kernel/ioport.c +++ b/arch/i386/kernel/ioport.c @@ -132,6 +132,7 @@ asmlinkage long sys_iopl(unsigned long unused) volatile struct pt_regs * regs = (struct pt_regs *) &unused; unsigned int level = regs->ebx; unsigned int old = (regs->eflags >> 12) & 3; + struct thread_struct *t = ¤t->thread; if (level > 3) return -EINVAL; @@ -140,8 +141,8 @@ asmlinkage long sys_iopl(unsigned long unused) if (!capable(CAP_SYS_RAWIO)) return -EPERM; } - regs->eflags = (regs->eflags &~ 0x3000UL) | (level << 12); - /* Make sure we return the long way (not sysenter) */ - set_thread_flag(TIF_IRET); + t->iopl = level << 12; + regs->eflags = (regs->eflags & ~X86_EFLAGS_IOPL) | t->iopl; + set_iopl_mask(t->iopl); return 0; } diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index a6d8c45961d3..6345b430b105 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -62,32 +62,32 @@ static inline int is_IF_modifier(kprobe_opcode_t opcode) return 0; } -int arch_prepare_kprobe(struct kprobe *p) +int __kprobes arch_prepare_kprobe(struct kprobe *p) { return 0; } -void arch_copy_kprobe(struct kprobe *p) +void __kprobes arch_copy_kprobe(struct kprobe *p) { memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); p->opcode = *p->addr; } -void arch_arm_kprobe(struct kprobe *p) +void __kprobes arch_arm_kprobe(struct kprobe *p) { *p->addr = BREAKPOINT_INSTRUCTION; flush_icache_range((unsigned long) p->addr, (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } -void arch_disarm_kprobe(struct kprobe *p) +void __kprobes arch_disarm_kprobe(struct kprobe *p) { *p->addr = p->opcode; flush_icache_range((unsigned long) p->addr, (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } -void arch_remove_kprobe(struct kprobe *p) +void __kprobes arch_remove_kprobe(struct kprobe *p) { } @@ -127,7 +127,8 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->eip = (unsigned long)&p->ainsn.insn; } -void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) +void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, + struct pt_regs *regs) { unsigned long *sara = (unsigned long *)®s->esp; struct kretprobe_instance *ri; @@ -150,7 +151,7 @@ void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) * Interrupts are disabled on entry as trap3 is an interrupt gate and they * remain disabled thorough out this function. */ -static int kprobe_handler(struct pt_regs *regs) +static int __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p; int ret = 0; @@ -176,7 +177,8 @@ static int kprobe_handler(struct pt_regs *regs) Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS) { + if (kprobe_status == KPROBE_HIT_SS && + *p->ainsn.insn == BREAKPOINT_INSTRUCTION) { regs->eflags &= ~TF_MASK; regs->eflags |= kprobe_saved_eflags; unlock_kprobes(); @@ -220,7 +222,10 @@ static int kprobe_handler(struct pt_regs *regs) * either a probepoint or a debugger breakpoint * at this address. In either case, no further * handling of this interrupt is appropriate. + * Back up over the (now missing) int3 and run + * the original instruction. */ + regs->eip -= sizeof(kprobe_opcode_t); ret = 1; } /* Not one of ours: let kernel handle it */ @@ -259,7 +264,7 @@ no_kprobe: /* * Called when we hit the probe point at kretprobe_trampoline */ -int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) { struct kretprobe_instance *ri = NULL; struct hlist_head *head; @@ -338,7 +343,7 @@ int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * that is atop the stack is the address following the copied instruction. * We need to make it the address following the original instruction. */ -static void resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) { unsigned long *tos = (unsigned long *)®s->esp; unsigned long next_eip = 0; @@ -444,8 +449,8 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) /* * Wrapper routine to for handling exceptions. */ -int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, - void *data) +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; switch (val) { @@ -473,7 +478,7 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, return NOTIFY_DONE; } -int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr; @@ -495,7 +500,7 @@ int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) return 1; } -void jprobe_return(void) +void __kprobes jprobe_return(void) { preempt_enable_no_resched(); asm volatile (" xchgl %%ebx,%%esp \n" @@ -506,7 +511,7 @@ void jprobe_return(void) (jprobe_saved_esp):"memory"); } -int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { u8 *addr = (u8 *) (regs->eip - 1); unsigned long stack_addr = (unsigned long)jprobe_saved_esp; diff --git a/arch/i386/kernel/ldt.c b/arch/i386/kernel/ldt.c index bb50afbee921..fe1ffa55587d 100644 --- a/arch/i386/kernel/ldt.c +++ b/arch/i386/kernel/ldt.c @@ -177,7 +177,7 @@ static int read_default_ldt(void __user * ptr, unsigned long bytecount) static int write_ldt(void __user * ptr, unsigned long bytecount, int oldmode) { struct mm_struct * mm = current->mm; - __u32 entry_1, entry_2, *lp; + __u32 entry_1, entry_2; int error; struct user_desc ldt_info; @@ -205,8 +205,6 @@ static int write_ldt(void __user * ptr, unsigned long bytecount, int oldmode) goto out_unlock; } - lp = (__u32 *) ((ldt_info.entry_number << 3) + (char *) mm->context.ldt); - /* Allow LDTs to be cleared by the user. */ if (ldt_info.base_addr == 0 && ldt_info.limit == 0) { if (oldmode || LDT_empty(&ldt_info)) { @@ -223,8 +221,7 @@ static int write_ldt(void __user * ptr, unsigned long bytecount, int oldmode) /* Install the new entry ... */ install: - *lp = entry_1; - *(lp+1) = entry_2; + write_ldt_entry(mm->context.ldt, ldt_info.entry_number, entry_1, entry_2); error = 0; out_unlock: diff --git a/arch/i386/kernel/machine_kexec.c b/arch/i386/kernel/machine_kexec.c index cb699a2aa1f8..a912fed48482 100644 --- a/arch/i386/kernel/machine_kexec.c +++ b/arch/i386/kernel/machine_kexec.c @@ -17,13 +17,7 @@ #include <asm/apic.h> #include <asm/cpufeature.h> #include <asm/desc.h> - -static inline unsigned long read_cr3(void) -{ - unsigned long cr3; - asm volatile("movl %%cr3,%0": "=r"(cr3)); - return cr3; -} +#include <asm/system.h> #define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE))) @@ -99,10 +93,7 @@ static void set_idt(void *newidt, __u16 limit) curidt.size = limit; curidt.address = (unsigned long)newidt; - __asm__ __volatile__ ( - "lidtl %0\n" - : : "m" (curidt) - ); + load_idt(&curidt); }; @@ -114,10 +105,7 @@ static void set_gdt(void *newgdt, __u16 limit) curgdt.size = limit; curgdt.address = (unsigned long)newgdt; - __asm__ __volatile__ ( - "lgdtl %0\n" - : : "m" (curgdt) - ); + load_gdt(&curgdt); }; static void load_segments(void) diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c index a77c612aad00..165f13158c60 100644 --- a/arch/i386/kernel/microcode.c +++ b/arch/i386/kernel/microcode.c @@ -164,7 +164,8 @@ static void collect_cpu_info (void *unused) } wrmsr(MSR_IA32_UCODE_REV, 0, 0); - __asm__ __volatile__ ("cpuid" : : : "ax", "bx", "cx", "dx"); + /* see notes above for revision 1.07. Apparent chip bug */ + serialize_cpu(); /* get the current revision from MSR 0x8B */ rdmsr(MSR_IA32_UCODE_REV, val[0], uci->rev); pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n", @@ -377,7 +378,9 @@ static void do_update_one (void * unused) (unsigned long) uci->mc->bits >> 16 >> 16); wrmsr(MSR_IA32_UCODE_REV, 0, 0); - __asm__ __volatile__ ("cpuid" : : : "ax", "bx", "cx", "dx"); + /* see notes above for revision 1.07. Apparent chip bug */ + serialize_cpu(); + /* get the current revision from MSR 0x8B */ rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index ce838abb27d8..15949fd08109 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -65,6 +65,8 @@ int nr_ioapics; int pic_mode; unsigned long mp_lapic_addr; +unsigned int def_to_bigsmp = 0; + /* Processor that is doing the boot up */ unsigned int boot_cpu_physical_apicid = -1U; /* Internal processor count */ @@ -121,7 +123,7 @@ static int MP_valid_apicid(int apicid, int version) static void __init MP_processor_info (struct mpc_config_processor *m) { int ver, apicid; - physid_mask_t tmp; + physid_mask_t phys_cpu; if (!(m->mpc_cpuflag & CPU_ENABLED)) return; @@ -192,27 +194,36 @@ static void __init MP_processor_info (struct mpc_config_processor *m) " Processor ignored.\n", maxcpus); return; } - num_processors++; ver = m->mpc_apicver; if (!MP_valid_apicid(apicid, ver)) { printk(KERN_WARNING "Processor #%d INVALID. (Max ID: %d).\n", m->mpc_apicid, MAX_APICS); - --num_processors; return; } - tmp = apicid_to_cpu_present(apicid); - physids_or(phys_cpu_present_map, phys_cpu_present_map, tmp); - + cpu_set(num_processors, cpu_possible_map); + num_processors++; + phys_cpu = apicid_to_cpu_present(apicid); + physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu); + /* * Validate version */ if (ver == 0x0) { - printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! fixing up to 0x10. (tell your hw vendor)\n", m->mpc_apicid); + printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! " + "fixing up to 0x10. (tell your hw vendor)\n", + m->mpc_apicid); ver = 0x10; } apic_version[m->mpc_apicid] = ver; + if ((num_processors > 8) && + APIC_XAPIC(ver) && + (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)) + def_to_bigsmp = 1; + else + def_to_bigsmp = 0; + bios_cpu_apicid[num_processors - 1] = m->mpc_apicid; } @@ -653,8 +664,6 @@ void __init get_smp_config (void) struct intel_mp_floating *mpf = mpf_found; /* - * ACPI may be used to obtain the entire SMP configuration or just to - * enumerate/configure processors (CONFIG_ACPI_BOOT). Note that * ACPI supports both logical (e.g. Hyper-Threading) and physical * processors, where MPS only supports physical. */ @@ -810,7 +819,7 @@ void __init find_smp_config (void) ACPI-based MP Configuration -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI void __init mp_register_lapic_address ( u64 address) @@ -856,7 +865,7 @@ void __init mp_register_lapic ( MP_processor_info(&processor); } -#if defined(CONFIG_X86_IO_APIC) && (defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_ACPI_BOOT)) +#ifdef CONFIG_X86_IO_APIC #define MP_ISA_BUS 0 #define MP_MAX_IOAPIC_PIN 127 @@ -1071,11 +1080,9 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) */ static int gsi_to_irq[MAX_GSI_NUM]; -#ifdef CONFIG_ACPI_BUS /* Don't set up the ACPI SCI because it's already set up */ if (acpi_fadt.sci_int == gsi) return gsi; -#endif ioapic = mp_find_ioapic(gsi); if (ioapic < 0) { @@ -1118,13 +1125,11 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) if (gsi < MAX_GSI_NUM) { if (gsi > 15) gsi = pci_irq++; -#ifdef CONFIG_ACPI_BUS /* * Don't assign IRQ used by ACPI SCI */ if (gsi == acpi_fadt.sci_int) gsi = pci_irq++; -#endif gsi_to_irq[irq] = gsi; } else { printk(KERN_ERR "GSI %u is too high\n", gsi); @@ -1138,5 +1143,5 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) return gsi; } -#endif /*CONFIG_X86_IO_APIC && (CONFIG_ACPI_INTERPRETER || CONFIG_ACPI_BOOT)*/ -#endif /*CONFIG_ACPI_BOOT*/ +#endif /* CONFIG_X86_IO_APIC */ +#endif /* CONFIG_ACPI */ diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c index b2f03c39a6fe..03100d6fc5d6 100644 --- a/arch/i386/kernel/msr.c +++ b/arch/i386/kernel/msr.c @@ -46,23 +46,13 @@ static struct class *msr_class; -/* Note: "err" is handled in a funny way below. Otherwise one version - of gcc or another breaks. */ - static inline int wrmsr_eio(u32 reg, u32 eax, u32 edx) { int err; - asm volatile ("1: wrmsr\n" - "2:\n" - ".section .fixup,\"ax\"\n" - "3: movl %4,%0\n" - " jmp 2b\n" - ".previous\n" - ".section __ex_table,\"a\"\n" - " .align 4\n" " .long 1b,3b\n" ".previous":"=&bDS" (err) - :"a"(eax), "d"(edx), "c"(reg), "i"(-EIO), "0"(0)); - + err = wrmsr_safe(reg, eax, edx); + if (err) + err = -EIO; return err; } @@ -70,18 +60,9 @@ static inline int rdmsr_eio(u32 reg, u32 *eax, u32 *edx) { int err; - asm volatile ("1: rdmsr\n" - "2:\n" - ".section .fixup,\"ax\"\n" - "3: movl %4,%0\n" - " jmp 2b\n" - ".previous\n" - ".section __ex_table,\"a\"\n" - " .align 4\n" - " .long 1b,3b\n" - ".previous":"=&bDS" (err), "=a"(*eax), "=d"(*edx) - :"c"(reg), "i"(-EIO), "0"(0)); - + err = rdmsr_safe(reg, eax, edx); + if (err) + err = -EIO; return err; } diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index 8c242bb1ef45..0178457db721 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -478,6 +478,11 @@ void touch_nmi_watchdog (void) */ for (i = 0; i < NR_CPUS; i++) alert_counter[i] = 0; + + /* + * Tickle the softlockup detector too: + */ + touch_softlockup_watchdog(); } extern void die_nmi(struct pt_regs *, const char *msg); @@ -501,8 +506,11 @@ void nmi_watchdog_tick (struct pt_regs * regs) */ alert_counter[cpu]++; if (alert_counter[cpu] == 5*nmi_hz) + /* + * die_nmi will return ONLY if NOTIFY_STOP happens.. + */ die_nmi(regs, "NMI Watchdog detected LOCKUP"); - } else { + last_irq_sums[cpu] = sum; alert_counter[cpu] = 0; } diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index e3f362e8af5b..b45cbf93d439 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -164,7 +164,7 @@ static inline void play_dead(void) */ local_irq_disable(); while (1) - __asm__ __volatile__("hlt":::"memory"); + halt(); } #else static inline void play_dead(void) @@ -313,16 +313,12 @@ void show_regs(struct pt_regs * regs) printk(" DS: %04x ES: %04x\n", 0xffff & regs->xds,0xffff & regs->xes); - __asm__("movl %%cr0, %0": "=r" (cr0)); - __asm__("movl %%cr2, %0": "=r" (cr2)); - __asm__("movl %%cr3, %0": "=r" (cr3)); - /* This could fault if %cr4 does not exist */ - __asm__("1: movl %%cr4, %0 \n" - "2: \n" - ".section __ex_table,\"a\" \n" - ".long 1b,2b \n" - ".previous \n" - : "=r" (cr4): "0" (0)); + cr0 = read_cr0(); + cr2 = read_cr2(); + cr3 = read_cr3(); + if (current_cpu_data.x86 > 4) { + cr4 = read_cr4(); + } printk("CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n", cr0, cr2, cr3, cr4); show_trace(NULL, ®s->esp); } @@ -682,21 +678,26 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas __unlazy_fpu(prev_p); /* - * Reload esp0, LDT and the page table pointer: + * Reload esp0. */ load_esp0(tss, next); /* - * Load the per-thread Thread-Local Storage descriptor. + * Save away %fs and %gs. No need to save %es and %ds, as + * those are always kernel segments while inside the kernel. + * Doing this before setting the new TLS descriptors avoids + * the situation where we temporarily have non-reloadable + * segments in %fs and %gs. This could be an issue if the + * NMI handler ever used %fs or %gs (it does not today), or + * if the kernel is running inside of a hypervisor layer. */ - load_TLS(next, cpu); + savesegment(fs, prev->fs); + savesegment(gs, prev->gs); /* - * Save away %fs and %gs. No need to save %es and %ds, as - * those are always kernel segments while inside the kernel. + * Load the per-thread Thread-Local Storage descriptor. */ - asm volatile("mov %%fs,%0":"=m" (prev->fs)); - asm volatile("mov %%gs,%0":"=m" (prev->gs)); + load_TLS(next, cpu); /* * Restore %fs and %gs if needed. @@ -711,6 +712,12 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas loadsegment(gs, next->gs); /* + * Restore IOPL if needed. + */ + if (unlikely(prev->iopl != next->iopl)) + set_iopl_mask(next->iopl); + + /* * Now maybe reload the debug registers */ if (unlikely(next->debugreg[7])) { diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c index 0da59b42843c..7b6368bf8974 100644 --- a/arch/i386/kernel/ptrace.c +++ b/arch/i386/kernel/ptrace.c @@ -271,6 +271,8 @@ static void clear_singlestep(struct task_struct *child) void ptrace_disable(struct task_struct *child) { clear_singlestep(child); + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + clear_tsk_thread_flag(child, TIF_SYSCALL_EMU); } /* @@ -509,15 +511,20 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data) } break; + case PTRACE_SYSEMU: /* continue and stop at next syscall, which will not be executed */ case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ case PTRACE_CONT: /* restart after signal. */ ret = -EIO; if (!valid_signal(data)) break; - if (request == PTRACE_SYSCALL) { + if (request == PTRACE_SYSEMU) { + set_tsk_thread_flag(child, TIF_SYSCALL_EMU); + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + } else if (request == PTRACE_SYSCALL) { set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - } - else { + clear_tsk_thread_flag(child, TIF_SYSCALL_EMU); + } else { + clear_tsk_thread_flag(child, TIF_SYSCALL_EMU); clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); } child->exit_code = data; @@ -542,10 +549,17 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data) wake_up_process(child); break; + case PTRACE_SYSEMU_SINGLESTEP: /* Same as SYSEMU, but singlestep if not syscall */ case PTRACE_SINGLESTEP: /* set the trap flag. */ ret = -EIO; if (!valid_signal(data)) break; + + if (request == PTRACE_SYSEMU_SINGLESTEP) + set_tsk_thread_flag(child, TIF_SYSCALL_EMU); + else + clear_tsk_thread_flag(child, TIF_SYSCALL_EMU); + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); set_singlestep(child); child->exit_code = data; @@ -678,27 +692,58 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code) * - triggered by current->work.syscall_trace */ __attribute__((regparm(3))) -void do_syscall_trace(struct pt_regs *regs, int entryexit) +int do_syscall_trace(struct pt_regs *regs, int entryexit) { - /* do the secure computing check first */ - secure_computing(regs->orig_eax); + int is_sysemu = test_thread_flag(TIF_SYSCALL_EMU); + /* + * With TIF_SYSCALL_EMU set we want to ignore TIF_SINGLESTEP for syscall + * interception + */ + int is_singlestep = !is_sysemu && test_thread_flag(TIF_SINGLESTEP); + int ret = 0; - if (unlikely(current->audit_context) && entryexit) - audit_syscall_exit(current, AUDITSC_RESULT(regs->eax), regs->eax); + /* do the secure computing check first */ + if (!entryexit) + secure_computing(regs->orig_eax); + + if (unlikely(current->audit_context)) { + if (entryexit) + audit_syscall_exit(current, AUDITSC_RESULT(regs->eax), + regs->eax); + /* Debug traps, when using PTRACE_SINGLESTEP, must be sent only + * on the syscall exit path. Normally, when TIF_SYSCALL_AUDIT is + * not used, entry.S will call us only on syscall exit, not + * entry; so when TIF_SYSCALL_AUDIT is used we must avoid + * calling send_sigtrap() on syscall entry. + * + * Note that when PTRACE_SYSEMU_SINGLESTEP is used, + * is_singlestep is false, despite his name, so we will still do + * the correct thing. + */ + else if (is_singlestep) + goto out; + } if (!(current->ptrace & PT_PTRACED)) goto out; + /* If a process stops on the 1st tracepoint with SYSCALL_TRACE + * and then is resumed with SYSEMU_SINGLESTEP, it will come in + * here. We have to check this and return */ + if (is_sysemu && entryexit) + return 0; + /* Fake a debug trap */ - if (test_thread_flag(TIF_SINGLESTEP)) + if (is_singlestep) send_sigtrap(current, regs, 0); - if (!test_thread_flag(TIF_SYSCALL_TRACE)) + if (!test_thread_flag(TIF_SYSCALL_TRACE) && !is_sysemu) goto out; /* the 0x80 provides a way for the tracing parent to distinguish between a syscall stop and SIGTRAP delivery */ - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0)); + /* Note that the debugger could change the result of test_thread_flag!*/ + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80:0)); /* * this isn't the same as continuing with a signal, but it will do @@ -709,9 +754,17 @@ void do_syscall_trace(struct pt_regs *regs, int entryexit) send_sig(current->exit_code, current, 1); current->exit_code = 0; } - out: + ret = is_sysemu; +out: if (unlikely(current->audit_context) && !entryexit) audit_syscall_entry(current, AUDIT_ARCH_I386, regs->orig_eax, regs->ebx, regs->ecx, regs->edx, regs->esi); - + if (ret == 0) + return 0; + + regs->orig_eax = -1; /* force skip of syscall restarting */ + if (unlikely(current->audit_context)) + audit_syscall_exit(current, AUDITSC_RESULT(regs->eax), + regs->eax); + return 1; } diff --git a/arch/i386/kernel/reboot.c b/arch/i386/kernel/reboot.c index c71fef31dc47..350ea6680f63 100644 --- a/arch/i386/kernel/reboot.c +++ b/arch/i386/kernel/reboot.c @@ -11,8 +11,10 @@ #include <linux/mc146818rtc.h> #include <linux/efi.h> #include <linux/dmi.h> +#include <linux/ctype.h> #include <asm/uaccess.h> #include <asm/apic.h> +#include <asm/desc.h> #include "mach_reboot.h" #include <linux/reboot_fixups.h> @@ -27,8 +29,6 @@ static int reboot_thru_bios; #ifdef CONFIG_SMP static int reboot_cpu = -1; -/* shamelessly grabbed from lib/vsprintf.c for readability */ -#define is_digit(c) ((c) >= '0' && (c) <= '9') #endif static int __init reboot_setup(char *str) { @@ -48,9 +48,9 @@ static int __init reboot_setup(char *str) break; #ifdef CONFIG_SMP case 's': /* "smp" reboot by executing reset on BSP or other CPU*/ - if (is_digit(*(str+1))) { + if (isdigit(*(str+1))) { reboot_cpu = (int) (*(str+1) - '0'); - if (is_digit(*(str+2))) + if (isdigit(*(str+2))) reboot_cpu = reboot_cpu*10 + (int)(*(str+2) - '0'); } /* we will leave sorting out the final value @@ -242,13 +242,13 @@ void machine_real_restart(unsigned char *code, int length) /* Set up the IDT for real mode. */ - __asm__ __volatile__ ("lidt %0" : : "m" (real_mode_idt)); + load_idt(&real_mode_idt); /* Set up a GDT from which we can load segment descriptors for real mode. The GDT is not used in real mode; it is just needed here to prepare the descriptors. */ - __asm__ __volatile__ ("lgdt %0" : : "m" (real_mode_gdt)); + load_gdt(&real_mode_gdt); /* Load the data segment registers, and thus the descriptors ready for real mode. The base address of each segment is 0x100, 16 times the @@ -316,7 +316,7 @@ void machine_emergency_restart(void) if (!reboot_thru_bios) { if (efi_enabled) { efi.reset_system(EFI_RESET_COLD, EFI_SUCCESS, 0, NULL); - __asm__ __volatile__("lidt %0": :"m" (no_idt)); + load_idt(&no_idt); __asm__ __volatile__("int3"); } /* rebooting needs to touch the page at absolute addr 0 */ @@ -325,7 +325,7 @@ void machine_emergency_restart(void) mach_reboot_fixups(); /* for board specific fixups */ mach_reboot(); /* That didn't work - force a triple fault.. */ - __asm__ __volatile__("lidt %0": :"m" (no_idt)); + load_idt(&no_idt); __asm__ __volatile__("int3"); } } diff --git a/arch/i386/kernel/semaphore.c b/arch/i386/kernel/semaphore.c index 469f496e55c0..7455ab643943 100644 --- a/arch/i386/kernel/semaphore.c +++ b/arch/i386/kernel/semaphore.c @@ -13,171 +13,9 @@ * rw semaphores implemented November 1999 by Benjamin LaHaise <bcrl@kvack.org> */ #include <linux/config.h> -#include <linux/sched.h> -#include <linux/err.h> -#include <linux/init.h> #include <asm/semaphore.h> /* - * Semaphores are implemented using a two-way counter: - * The "count" variable is decremented for each process - * that tries to acquire the semaphore, while the "sleeping" - * variable is a count of such acquires. - * - * Notably, the inline "up()" and "down()" functions can - * efficiently test if they need to do any extra work (up - * needs to do something only if count was negative before - * the increment operation. - * - * "sleeping" and the contention routine ordering is protected - * by the spinlock in the semaphore's waitqueue head. - * - * Note that these functions are only called when there is - * contention on the lock, and as such all this is the - * "non-critical" part of the whole semaphore business. The - * critical part is the inline stuff in <asm/semaphore.h> - * where we want to avoid any extra jumps and calls. - */ - -/* - * Logic: - * - only on a boundary condition do we need to care. When we go - * from a negative count to a non-negative, we wake people up. - * - when we go from a non-negative count to a negative do we - * (a) synchronize with the "sleeper" count and (b) make sure - * that we're on the wakeup list before we synchronize so that - * we cannot lose wakeup events. - */ - -static fastcall void __attribute_used__ __up(struct semaphore *sem) -{ - wake_up(&sem->wait); -} - -static fastcall void __attribute_used__ __sched __down(struct semaphore * sem) -{ - struct task_struct *tsk = current; - DECLARE_WAITQUEUE(wait, tsk); - unsigned long flags; - - tsk->state = TASK_UNINTERRUPTIBLE; - spin_lock_irqsave(&sem->wait.lock, flags); - add_wait_queue_exclusive_locked(&sem->wait, &wait); - - sem->sleepers++; - for (;;) { - int sleepers = sem->sleepers; - - /* - * Add "everybody else" into it. They aren't - * playing, because we own the spinlock in - * the wait_queue_head. - */ - if (!atomic_add_negative(sleepers - 1, &sem->count)) { - sem->sleepers = 0; - break; - } - sem->sleepers = 1; /* us - see -1 above */ - spin_unlock_irqrestore(&sem->wait.lock, flags); - - schedule(); - - spin_lock_irqsave(&sem->wait.lock, flags); - tsk->state = TASK_UNINTERRUPTIBLE; - } - remove_wait_queue_locked(&sem->wait, &wait); - wake_up_locked(&sem->wait); - spin_unlock_irqrestore(&sem->wait.lock, flags); - tsk->state = TASK_RUNNING; -} - -static fastcall int __attribute_used__ __sched __down_interruptible(struct semaphore * sem) -{ - int retval = 0; - struct task_struct *tsk = current; - DECLARE_WAITQUEUE(wait, tsk); - unsigned long flags; - - tsk->state = TASK_INTERRUPTIBLE; - spin_lock_irqsave(&sem->wait.lock, flags); - add_wait_queue_exclusive_locked(&sem->wait, &wait); - - sem->sleepers++; - for (;;) { - int sleepers = sem->sleepers; - - /* - * With signals pending, this turns into - * the trylock failure case - we won't be - * sleeping, and we* can't get the lock as - * it has contention. Just correct the count - * and exit. - */ - if (signal_pending(current)) { - retval = -EINTR; - sem->sleepers = 0; - atomic_add(sleepers, &sem->count); - break; - } - - /* - * Add "everybody else" into it. They aren't - * playing, because we own the spinlock in - * wait_queue_head. The "-1" is because we're - * still hoping to get the semaphore. - */ - if (!atomic_add_negative(sleepers - 1, &sem->count)) { - sem->sleepers = 0; - break; - } - sem->sleepers = 1; /* us - see -1 above */ - spin_unlock_irqrestore(&sem->wait.lock, flags); - - schedule(); - - spin_lock_irqsave(&sem->wait.lock, flags); - tsk->state = TASK_INTERRUPTIBLE; - } - remove_wait_queue_locked(&sem->wait, &wait); - wake_up_locked(&sem->wait); - spin_unlock_irqrestore(&sem->wait.lock, flags); - - tsk->state = TASK_RUNNING; - return retval; -} - -/* - * Trylock failed - make sure we correct for - * having decremented the count. - * - * We could have done the trylock with a - * single "cmpxchg" without failure cases, - * but then it wouldn't work on a 386. - */ -static fastcall int __attribute_used__ __down_trylock(struct semaphore * sem) -{ - int sleepers; - unsigned long flags; - - spin_lock_irqsave(&sem->wait.lock, flags); - sleepers = sem->sleepers + 1; - sem->sleepers = 0; - - /* - * Add "everybody else" and us into it. They aren't - * playing, because we own the spinlock in the - * wait_queue_head. - */ - if (!atomic_add_negative(sleepers, &sem->count)) { - wake_up_locked(&sem->wait); - } - - spin_unlock_irqrestore(&sem->wait.lock, flags); - return 1; -} - - -/* * The semaphore operations have a special calling sequence that * allow us to do a simpler in-line version of them. These routines * need to convert that sequence back into the C sequence when diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index af4de58cab54..dc39ca6a7eca 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -82,19 +82,19 @@ EXPORT_SYMBOL(efi_enabled); /* cpu data as detected by the assembly code in head.S */ struct cpuinfo_x86 new_cpu_data __initdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 }; /* common cpu data for all cpus */ -struct cpuinfo_x86 boot_cpu_data = { 0, 0, 0, 0, -1, 1, 0, 0, -1 }; +struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 }; EXPORT_SYMBOL(boot_cpu_data); unsigned long mmu_cr4_features; -#ifdef CONFIG_ACPI_INTERPRETER +#ifdef CONFIG_ACPI int acpi_disabled = 0; #else int acpi_disabled = 1; #endif EXPORT_SYMBOL(acpi_disabled); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI int __initdata acpi_force = 0; extern acpi_interrupt_flags acpi_sci_flags; #endif @@ -139,6 +139,7 @@ struct sys_desc_table_struct { unsigned char table[0]; }; struct edid_info edid_info; +EXPORT_SYMBOL_GPL(edid_info); struct ist_info ist_info; #if defined(CONFIG_X86_SPEEDSTEP_SMI) || \ defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE) @@ -370,12 +371,16 @@ static void __init limit_regions(unsigned long long size) int i; if (efi_enabled) { - for (i = 0; i < memmap.nr_map; i++) { - current_addr = memmap.map[i].phys_addr + - (memmap.map[i].num_pages << 12); - if (memmap.map[i].type == EFI_CONVENTIONAL_MEMORY) { + efi_memory_desc_t *md; + void *p; + + for (p = memmap.map, i = 0; p < memmap.map_end; + p += memmap.desc_size, i++) { + md = p; + current_addr = md->phys_addr + (md->num_pages << 12); + if (md->type == EFI_CONVENTIONAL_MEMORY) { if (current_addr >= size) { - memmap.map[i].num_pages -= + md->num_pages -= (((current_addr-size) + PAGE_SIZE-1) >> PAGE_SHIFT); memmap.nr_map = i + 1; return; @@ -794,7 +799,7 @@ static void __init parse_cmdline_early (char ** cmdline_p) } #endif -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* "acpi=off" disables both ACPI table parsing and interpreter */ else if (!memcmp(from, "acpi=off", 8)) { disable_acpi(); @@ -846,11 +851,16 @@ static void __init parse_cmdline_early (char ** cmdline_p) #endif #ifdef CONFIG_X86_LOCAL_APIC + if (!memcmp(from, "disable_timer_pin_1", 19)) + disable_timer_pin_1 = 1; + if (!memcmp(from, "enable_timer_pin_1", 18)) + disable_timer_pin_1 = -1; + /* disable IO-APIC */ else if (!memcmp(from, "noapic", 6)) disable_ioapic_setup(); #endif /* CONFIG_X86_LOCAL_APIC */ -#endif /* CONFIG_ACPI_BOOT */ +#endif /* CONFIG_ACPI */ #ifdef CONFIG_X86_LOCAL_APIC /* enable local APIC */ @@ -1295,7 +1305,7 @@ legacy_init_iomem_resources(struct resource *code_resource, struct resource *dat */ static void __init register_memory(void) { - unsigned long gapstart, gapsize; + unsigned long gapstart, gapsize, round; unsigned long long last; int i; @@ -1340,14 +1350,14 @@ static void __init register_memory(void) } /* - * Start allocating dynamic PCI memory a bit into the gap, - * aligned up to the nearest megabyte. - * - * Question: should we try to pad it up a bit (do something - * like " + (gapsize >> 3)" in there too?). We now have the - * technology. + * See how much we want to round up: start off with + * rounding to the next 1MB area. */ - pci_mem_start = (gapstart + 0xfffff) & ~0xfffff; + round = 0x100000; + while ((gapsize >> 4) > round) + round += round; + /* Fun with two's complement */ + pci_mem_start = (gapstart + round) & -round; printk("Allocating PCI resources starting at %08lx (gap: %08lx:%08lx)\n", pci_mem_start, gapstart, gapsize); @@ -1575,14 +1585,20 @@ void __init setup_arch(char **cmdline_p) if (efi_enabled) efi_map_memmap(); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* * Parse the ACPI tables for possible boot-time SMP configuration. */ acpi_boot_table_init(); acpi_boot_init(); -#endif +#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC) + if (def_to_bigsmp) + printk(KERN_WARNING "More than 8 CPUs detected and " + "CONFIG_X86_PC cannot handle it.\nUse " + "CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n"); +#endif +#endif #ifdef CONFIG_X86_LOCAL_APIC if (smp_found_config) get_smp_config(); diff --git a/arch/i386/kernel/sigframe.h b/arch/i386/kernel/sigframe.h index d21b14f5c25c..0b2221711dad 100644 --- a/arch/i386/kernel/sigframe.h +++ b/arch/i386/kernel/sigframe.h @@ -1,6 +1,6 @@ struct sigframe { - char *pretcode; + char __user *pretcode; int sig; struct sigcontext sc; struct _fpstate fpstate; @@ -10,10 +10,10 @@ struct sigframe struct rt_sigframe { - char *pretcode; + char __user *pretcode; int sig; - struct siginfo *pinfo; - void *puc; + struct siginfo __user *pinfo; + void __user *puc; struct siginfo info; struct ucontext uc; struct _fpstate fpstate; diff --git a/arch/i386/kernel/signal.c b/arch/i386/kernel/signal.c index 89ef7adc63a4..61eb0c8a6e47 100644 --- a/arch/i386/kernel/signal.c +++ b/arch/i386/kernel/signal.c @@ -278,9 +278,9 @@ setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate, int tmp, err = 0; tmp = 0; - __asm__("movl %%gs,%0" : "=r"(tmp): "0"(tmp)); + savesegment(gs, tmp); err |= __put_user(tmp, (unsigned int __user *)&sc->gs); - __asm__("movl %%fs,%0" : "=r"(tmp): "0"(tmp)); + savesegment(fs, tmp); err |= __put_user(tmp, (unsigned int __user *)&sc->fs); err |= __put_user(regs->xes, (unsigned int __user *)&sc->es); @@ -577,10 +577,11 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, else ret = setup_frame(sig, ka, oldset, regs); - if (ret && !(ka->sa.sa_flags & SA_NODEFER)) { + if (ret) { spin_lock_irq(¤t->sighand->siglock); sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); - sigaddset(¤t->blocked,sig); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked,sig); recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); } @@ -603,7 +604,9 @@ int fastcall do_signal(struct pt_regs *regs, sigset_t *oldset) * We want the common case to go fast, which * is why we may in certain cases get here from * kernel mode. Just return without doing anything - * if so. + * if so. vm86 regs switched out by assembly code + * before reaching here, so testing against kernel + * CS suffices. */ if (!user_mode(regs)) return 1; diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c index cec4bde67161..48b55db3680f 100644 --- a/arch/i386/kernel/smp.c +++ b/arch/i386/kernel/smp.c @@ -576,7 +576,7 @@ static void stop_this_cpu (void * dummy) local_irq_disable(); disable_local_APIC(); if (cpu_data[smp_processor_id()].hlt_works_ok) - for(;;) __asm__("hlt"); + for(;;) halt(); for (;;); } diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 8ac8e9fd5614..5f0a95d76a4f 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -88,6 +88,8 @@ EXPORT_SYMBOL(cpu_online_map); cpumask_t cpu_callin_map; cpumask_t cpu_callout_map; EXPORT_SYMBOL(cpu_callout_map); +cpumask_t cpu_possible_map; +EXPORT_SYMBOL(cpu_possible_map); static cpumask_t smp_commenced_mask; /* TSC's upper 32 bits can't be written in eariler CPU (before prescott), there @@ -200,7 +202,7 @@ static void __devinit smp_store_cpu_info(int id) goto valid_k7; /* If we get here, it's not a certified SMP capable AMD system. */ - tainted |= TAINT_UNSAFE_SMP; + add_taint(TAINT_UNSAFE_SMP); } valid_k7: @@ -1017,8 +1019,8 @@ int __devinit smp_prepare_cpu(int cpu) tsc_sync_disabled = 1; /* init low mem mapping */ - memcpy(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS, - sizeof(swapper_pg_dir[0]) * KERNEL_PGD_PTRS); + clone_pgd_range(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS, + KERNEL_PGD_PTRS); flush_tlb_all(); schedule_work(&task); wait_for_completion(&done); @@ -1265,6 +1267,7 @@ void __devinit smp_prepare_boot_cpu(void) cpu_set(smp_processor_id(), cpu_online_map); cpu_set(smp_processor_id(), cpu_callout_map); cpu_set(smp_processor_id(), cpu_present_map); + cpu_set(smp_processor_id(), cpu_possible_map); per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; } @@ -1327,8 +1330,7 @@ void __cpu_die(unsigned int cpu) printk ("CPU %d is now offline\n", cpu); return; } - current->state = TASK_UNINTERRUPTIBLE; - schedule_timeout(HZ/10); + msleep(100); } printk(KERN_ERR "CPU %u didn't die...\n", cpu); } diff --git a/arch/i386/kernel/srat.c b/arch/i386/kernel/srat.c index 7b3b27d64409..516bf5653b02 100644 --- a/arch/i386/kernel/srat.c +++ b/arch/i386/kernel/srat.c @@ -213,12 +213,18 @@ static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_c node_end_pfn[nid] = memory_chunk->end_pfn; } +static u8 pxm_to_nid_map[MAX_PXM_DOMAINS];/* _PXM to logical node ID map */ + +int pxm_to_node(int pxm) +{ + return pxm_to_nid_map[pxm]; +} + /* Parse the ACPI Static Resource Affinity Table */ static int __init acpi20_parse_srat(struct acpi_table_srat *sratp) { u8 *start, *end, *p; int i, j, nid; - u8 pxm_to_nid_map[MAX_PXM_DOMAINS];/* _PXM to logical node ID map */ u8 nid_to_pxm_map[MAX_NUMNODES];/* logical node ID to _PXM map */ start = (u8 *)(&(sratp->reserved) + 1); /* skip header */ diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index 0ee9dee8af06..2883a4d4f01f 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -194,10 +194,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; @@ -252,8 +249,7 @@ EXPORT_SYMBOL(profile_pc); * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -static inline void do_timer_interrupt(int irq, void *dev_id, - struct pt_regs *regs) +static inline void do_timer_interrupt(int irq, struct pt_regs *regs) { #ifdef CONFIG_X86_IO_APIC if (timer_ack) { @@ -307,7 +303,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) cur_timer->mark_offset(); - do_timer_interrupt(irq, NULL, regs); + do_timer_interrupt(irq, regs); write_sequnlock(&xtime_lock); return IRQ_HANDLED; @@ -333,8 +329,7 @@ EXPORT_SYMBOL(get_cmos_time); static void sync_cmos_clock(unsigned long dummy); -static struct timer_list sync_cmos_timer = - TIMER_INITIALIZER(sync_cmos_clock, 0, 0); +static DEFINE_TIMER(sync_cmos_timer, sync_cmos_clock, 0, 0); static void sync_cmos_clock(unsigned long dummy) { @@ -348,7 +343,7 @@ static void sync_cmos_clock(unsigned long dummy) * This code is run on a timer. If the clock is set, that timer * may not expire at the correct time. Thus, we adjust... */ - if ((time_status & STA_UNSYNC) != 0) + if (!ntp_synced()) /* * Not synced, exit, do not restart a timer (if one is * running, let it run out). @@ -383,6 +378,7 @@ void notify_arch_cmos_timer(void) static long clock_cmos_diff, sleep_start; +static struct timer_opts *last_timer; static int timer_suspend(struct sys_device *dev, pm_message_t state) { /* @@ -391,6 +387,10 @@ static int timer_suspend(struct sys_device *dev, pm_message_t state) clock_cmos_diff = -get_cmos_time(); clock_cmos_diff += get_seconds(); sleep_start = get_cmos_time(); + last_timer = cur_timer; + cur_timer = &timer_none; + if (last_timer->suspend) + last_timer->suspend(state); return 0; } @@ -404,6 +404,7 @@ static int timer_resume(struct sys_device *dev) if (is_hpet_enabled()) hpet_reenable(); #endif + setup_pit_timer(); sec = get_cmos_time() + clock_cmos_diff; sleep_length = (get_cmos_time() - sleep_start) * HZ; write_seqlock_irqsave(&xtime_lock, flags); @@ -412,6 +413,11 @@ static int timer_resume(struct sys_device *dev) write_sequnlock_irqrestore(&xtime_lock, flags); jiffies += sleep_length; wall_jiffies += sleep_length; + if (last_timer->resume) + last_timer->resume(); + cur_timer = last_timer; + last_timer = NULL; + touch_softlockup_watchdog(); return 0; } diff --git a/arch/i386/kernel/timers/timer_hpet.c b/arch/i386/kernel/timers/timer_hpet.c index ef8dac5dd33b..d973a8b681fd 100644 --- a/arch/i386/kernel/timers/timer_hpet.c +++ b/arch/i386/kernel/timers/timer_hpet.c @@ -18,8 +18,8 @@ #include "mach_timer.h" #include <asm/hpet.h> -static unsigned long __read_mostly hpet_usec_quotient; /* convert hpet clks to usec */ -static unsigned long tsc_hpet_quotient; /* convert tsc to hpet clks */ +static unsigned long hpet_usec_quotient __read_mostly; /* convert hpet clks to usec */ +static unsigned long tsc_hpet_quotient __read_mostly; /* convert tsc to hpet clks */ static unsigned long hpet_last; /* hpet counter value at last tick*/ static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */ static unsigned long last_tsc_high; /* msb 32 bits of Time Stamp Counter */ @@ -136,6 +136,8 @@ static void delay_hpet(unsigned long loops) } while ((hpet_end - hpet_start) < (loops)); } +static struct timer_opts timer_hpet; + static int __init init_hpet(char* override) { unsigned long result, remain; @@ -163,6 +165,8 @@ static int __init init_hpet(char* override) } set_cyc2ns_scale(cpu_khz/1000); } + /* set this only when cpu_has_tsc */ + timer_hpet.read_timer = read_timer_tsc; } /* @@ -177,6 +181,19 @@ static int __init init_hpet(char* override) return 0; } +static int hpet_resume(void) +{ + write_seqlock(&monotonic_lock); + /* Assume this is the last mark offset time */ + rdtsc(last_tsc_low, last_tsc_high); + + if (hpet_use_timer) + hpet_last = hpet_readl(HPET_T0_CMP) - hpet_tick; + else + hpet_last = hpet_readl(HPET_COUNTER); + write_sequnlock(&monotonic_lock); + return 0; +} /************************************************************/ /* tsc timer_opts struct */ @@ -186,7 +203,7 @@ static struct timer_opts timer_hpet __read_mostly = { .get_offset = get_offset_hpet, .monotonic_clock = monotonic_clock_hpet, .delay = delay_hpet, - .read_timer = read_timer_tsc, + .resume = hpet_resume, }; struct init_timer_opts __initdata timer_hpet_init = { diff --git a/arch/i386/kernel/timers/timer_pit.c b/arch/i386/kernel/timers/timer_pit.c index 06de036a820c..eddb64038234 100644 --- a/arch/i386/kernel/timers/timer_pit.c +++ b/arch/i386/kernel/timers/timer_pit.c @@ -175,30 +175,3 @@ void setup_pit_timer(void) outb(LATCH >> 8 , PIT_CH0); /* MSB */ spin_unlock_irqrestore(&i8253_lock, flags); } - -static int timer_resume(struct sys_device *dev) -{ - setup_pit_timer(); - return 0; -} - -static struct sysdev_class timer_sysclass = { - set_kset_name("timer_pit"), - .resume = timer_resume, -}; - -static struct sys_device device_timer = { - .id = 0, - .cls = &timer_sysclass, -}; - -static int __init init_timer_sysfs(void) -{ - int error = sysdev_class_register(&timer_sysclass); - if (!error) - error = sysdev_register(&device_timer); - return error; -} - -device_initcall(init_timer_sysfs); - diff --git a/arch/i386/kernel/timers/timer_pm.c b/arch/i386/kernel/timers/timer_pm.c index 4ef20e663498..264edaaac315 100644 --- a/arch/i386/kernel/timers/timer_pm.c +++ b/arch/i386/kernel/timers/timer_pm.c @@ -186,6 +186,14 @@ static void mark_offset_pmtmr(void) } } +static int pmtmr_resume(void) +{ + write_seqlock(&monotonic_lock); + /* Assume this is the last mark offset time */ + offset_tick = read_pmtmr(); + write_sequnlock(&monotonic_lock); + return 0; +} static unsigned long long monotonic_clock_pmtmr(void) { @@ -247,6 +255,7 @@ static struct timer_opts timer_pmtmr = { .monotonic_clock = monotonic_clock_pmtmr, .delay = delay_pmtmr, .read_timer = read_timer_tsc, + .resume = pmtmr_resume, }; struct init_timer_opts __initdata timer_pmtmr_init = { diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c index 8f4e4d5bc560..6dd470cc9f72 100644 --- a/arch/i386/kernel/timers/timer_tsc.c +++ b/arch/i386/kernel/timers/timer_tsc.c @@ -543,6 +543,19 @@ static int __init init_tsc(char* override) return -ENODEV; } +static int tsc_resume(void) +{ + write_seqlock(&monotonic_lock); + /* Assume this is the last mark offset time */ + rdtsc(last_tsc_low, last_tsc_high); +#ifdef CONFIG_HPET_TIMER + if (is_hpet_enabled() && hpet_use_timer) + hpet_last = hpet_readl(HPET_COUNTER); +#endif + write_sequnlock(&monotonic_lock); + return 0; +} + #ifndef CONFIG_X86_TSC /* disable flag for tsc. Takes effect by clearing the TSC cpu flag * in cpu/common.c */ @@ -573,6 +586,7 @@ static struct timer_opts timer_tsc = { .monotonic_clock = monotonic_clock_tsc, .delay = delay_tsc, .read_timer = read_timer_tsc, + .resume = tsc_resume, }; struct init_timer_opts __initdata timer_tsc_init = { diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index cd2d5d5514fe..09a58cb6daa7 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -210,7 +210,7 @@ void show_registers(struct pt_regs *regs) unsigned short ss; esp = (unsigned long) (®s->esp); - ss = __KERNEL_DS; + savesegment(ss, ss); if (user_mode(regs)) { in_kernel = 0; esp = regs->esp; @@ -267,9 +267,6 @@ static void handle_BUG(struct pt_regs *regs) char c; unsigned long eip; - if (user_mode(regs)) - goto no_bug; /* Not in kernel */ - eip = regs->eip; if (eip < PAGE_OFFSET) @@ -366,8 +363,9 @@ static inline void die_if_kernel(const char * str, struct pt_regs * regs, long e die(str, regs, err); } -static void do_trap(int trapnr, int signr, char *str, int vm86, - struct pt_regs * regs, long error_code, siginfo_t *info) +static void __kprobes do_trap(int trapnr, int signr, char *str, int vm86, + struct pt_regs * regs, long error_code, + siginfo_t *info) { struct task_struct *tsk = current; tsk->thread.error_code = error_code; @@ -463,7 +461,8 @@ DO_ERROR(12, SIGBUS, "stack segment", stack_segment) DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0) DO_ERROR_INFO(32, SIGSEGV, "iret exception", iret_error, ILL_BADSTK, 0) -fastcall void do_general_protection(struct pt_regs * regs, long error_code) +fastcall void __kprobes do_general_protection(struct pt_regs * regs, + long error_code) { int cpu = get_cpu(); struct tss_struct *tss = &per_cpu(init_tss, cpu); @@ -568,6 +567,10 @@ static DEFINE_SPINLOCK(nmi_print_lock); void die_nmi (struct pt_regs *regs, const char *msg) { + if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 0, SIGINT) == + NOTIFY_STOP) + return; + spin_lock(&nmi_print_lock); /* * We are in trouble anyway, lets at least try @@ -656,7 +659,7 @@ fastcall void do_nmi(struct pt_regs * regs, long error_code) ++nmi_count(cpu); - if (!nmi_callback(regs, cpu)) + if (!rcu_dereference(nmi_callback)(regs, cpu)) default_do_nmi(regs); nmi_exit(); @@ -664,7 +667,7 @@ fastcall void do_nmi(struct pt_regs * regs, long error_code) void set_nmi_callback(nmi_callback_t callback) { - nmi_callback = callback; + rcu_assign_pointer(nmi_callback, callback); } EXPORT_SYMBOL_GPL(set_nmi_callback); @@ -675,7 +678,7 @@ void unset_nmi_callback(void) EXPORT_SYMBOL_GPL(unset_nmi_callback); #ifdef CONFIG_KPROBES -fastcall void do_int3(struct pt_regs *regs, long error_code) +fastcall void __kprobes do_int3(struct pt_regs *regs, long error_code) { if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) == NOTIFY_STOP) @@ -709,7 +712,7 @@ fastcall void do_int3(struct pt_regs *regs, long error_code) * find every occurrence of the TF bit that could be saved away even * by user code) */ -fastcall void do_debug(struct pt_regs * regs, long error_code) +fastcall void __kprobes do_debug(struct pt_regs * regs, long error_code) { unsigned int condition; struct task_struct *tsk = current; @@ -1008,7 +1011,7 @@ void __init trap_init_f00f_bug(void) * it uses the read-only mapped virtual address. */ idt_descr.address = fix_to_virt(FIX_F00F_IDT); - __asm__ __volatile__("lidt %0" : : "m" (idt_descr)); + load_idt(&idt_descr); } #endif diff --git a/arch/i386/kernel/vm86.c b/arch/i386/kernel/vm86.c index ec0f68ce6886..16b485009622 100644 --- a/arch/i386/kernel/vm86.c +++ b/arch/i386/kernel/vm86.c @@ -294,8 +294,8 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk */ info->regs32->eax = 0; tsk->thread.saved_esp0 = tsk->thread.esp0; - asm volatile("mov %%fs,%0":"=m" (tsk->thread.saved_fs)); - asm volatile("mov %%gs,%0":"=m" (tsk->thread.saved_gs)); + savesegment(fs, tsk->thread.saved_fs); + savesegment(gs, tsk->thread.saved_gs); tss = &per_cpu(init_tss, get_cpu()); tsk->thread.esp0 = (unsigned long) &info->VM86_TSS_ESP0; @@ -542,7 +542,7 @@ void handle_vm86_fault(struct kernel_vm86_regs * regs, long error_code) unsigned char opcode; unsigned char __user *csp; unsigned char __user *ssp; - unsigned short ip, sp; + unsigned short ip, sp, orig_flags; int data32, pref_done; #define CHECK_IF_IN_TRAP \ @@ -551,8 +551,12 @@ void handle_vm86_fault(struct kernel_vm86_regs * regs, long error_code) #define VM86_FAULT_RETURN do { \ if (VMPI.force_return_for_pic && (VEFLAGS & (IF_MASK | VIF_MASK))) \ return_to_32bit(regs, VM86_PICRETURN); \ + if (orig_flags & TF_MASK) \ + handle_vm86_trap(regs, 0, 1); \ return; } while (0) + orig_flags = *(unsigned short *)®s->eflags; + csp = (unsigned char __user *) (regs->cs << 4); ssp = (unsigned char __user *) (regs->ss << 4); sp = SP(regs); diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S index 761972f8cb6c..4710195b6b74 100644 --- a/arch/i386/kernel/vmlinux.lds.S +++ b/arch/i386/kernel/vmlinux.lds.S @@ -22,6 +22,7 @@ SECTIONS *(.text) SCHED_TEXT LOCK_TEXT + KPROBES_TEXT *(.fixup) *(.gnu.warning) } = 0x9090 @@ -143,12 +144,7 @@ SECTIONS *(.exitcall.exit) } - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } + STABS_DEBUG + + DWARF_DEBUG } diff --git a/arch/i386/kernel/vsyscall-sigreturn.S b/arch/i386/kernel/vsyscall-sigreturn.S index c8fcf75b9be3..fadb5bc3c374 100644 --- a/arch/i386/kernel/vsyscall-sigreturn.S +++ b/arch/i386/kernel/vsyscall-sigreturn.S @@ -7,7 +7,7 @@ */ #include <asm/unistd.h> -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> /* XXX @@ -15,7 +15,7 @@ */ .text - .org __kernel_vsyscall+32 + .org __kernel_vsyscall+32,0x90 .globl __kernel_sigreturn .type __kernel_sigreturn,@function __kernel_sigreturn: @@ -35,6 +35,7 @@ __kernel_rt_sigreturn: int $0x80 .LEND_rt_sigreturn: .size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn + .balign 32 .previous .section .eh_frame,"a",@progbits diff --git a/arch/i386/kernel/vsyscall.lds.S b/arch/i386/kernel/vsyscall.lds.S index a7977707c8e5..98699ca6e52d 100644 --- a/arch/i386/kernel/vsyscall.lds.S +++ b/arch/i386/kernel/vsyscall.lds.S @@ -3,7 +3,7 @@ * object prelinked to its virtual address, and with only one read-only * segment (that fits in one page). This script controls its layout. */ -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> SECTIONS { diff --git a/arch/i386/mach-default/topology.c b/arch/i386/mach-default/topology.c index 23395fff35d1..b64314069e78 100644 --- a/arch/i386/mach-default/topology.c +++ b/arch/i386/mach-default/topology.c @@ -76,7 +76,7 @@ static int __init topology_init(void) for_each_online_node(i) arch_register_node(i); - for_each_cpu(i) + for_each_present_cpu(i) arch_register_cpu(i); return 0; } @@ -87,7 +87,7 @@ static int __init topology_init(void) { int i; - for_each_cpu(i) + for_each_present_cpu(i) arch_register_cpu(i); return 0; } diff --git a/arch/i386/mach-es7000/es7000.h b/arch/i386/mach-es7000/es7000.h index 70691f0c4ce2..898ed905e119 100644 --- a/arch/i386/mach-es7000/es7000.h +++ b/arch/i386/mach-es7000/es7000.h @@ -104,7 +104,8 @@ struct mip_reg { #define MIP_SW_APIC 0x1020b #define MIP_FUNC(VALUE) (VALUE & 0xff) -extern int parse_unisys_oem (char *oemptr, int oem_entries); -extern int find_unisys_acpi_oem_table(unsigned long *oem_addr, int *length); +extern int parse_unisys_oem (char *oemptr); +extern int find_unisys_acpi_oem_table(unsigned long *oem_addr); +extern void setup_unisys (); extern int es7000_start_cpu(int cpu, unsigned long eip); extern void es7000_sw_apic(void); diff --git a/arch/i386/mach-es7000/es7000plat.c b/arch/i386/mach-es7000/es7000plat.c index d5936d500479..dc6660511b07 100644 --- a/arch/i386/mach-es7000/es7000plat.c +++ b/arch/i386/mach-es7000/es7000plat.c @@ -51,7 +51,7 @@ struct mip_reg *host_reg; int mip_port; unsigned long mip_addr, host_addr; -#if defined(CONFIG_X86_IO_APIC) && (defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_ACPI_BOOT)) +#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI) /* * GSI override for ES7000 platforms. @@ -73,14 +73,31 @@ es7000_rename_gsi(int ioapic, int gsi) return gsi; } -#endif // (CONFIG_X86_IO_APIC) && (CONFIG_ACPI_INTERPRETER || CONFIG_ACPI_BOOT) +#endif /* (CONFIG_X86_IO_APIC) && (CONFIG_ACPI) */ + +void __init +setup_unisys () +{ + /* + * Determine the generation of the ES7000 currently running. + * + * es7000_plat = 1 if the machine is a 5xx ES7000 box + * es7000_plat = 2 if the machine is a x86_64 ES7000 box + * + */ + if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2)) + es7000_plat = 2; + else + es7000_plat = 1; + ioapic_renumber_irq = es7000_rename_gsi; +} /* * Parse the OEM Table */ int __init -parse_unisys_oem (char *oemptr, int oem_entries) +parse_unisys_oem (char *oemptr) { int i; int success = 0; @@ -95,7 +112,7 @@ parse_unisys_oem (char *oemptr, int oem_entries) tp += 8; - for (i=0; i <= oem_entries; i++) { + for (i=0; i <= 6; i++) { type = *tp++; size = *tp++; tp -= 2; @@ -130,34 +147,18 @@ parse_unisys_oem (char *oemptr, int oem_entries) default: break; } - if (i == 6) break; tp += size; } if (success < 2) { es7000_plat = 0; - } else { - printk("\nEnabling ES7000 specific features...\n"); - /* - * Determine the generation of the ES7000 currently running. - * - * es7000_plat = 0 if the machine is NOT a Unisys ES7000 box - * es7000_plat = 1 if the machine is a 5xx ES7000 box - * es7000_plat = 2 if the machine is a x86_64 ES7000 box - * - */ - if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2)) - es7000_plat = 2; - else - es7000_plat = 1; - - ioapic_renumber_irq = es7000_rename_gsi; - } + } else + setup_unisys(); return es7000_plat; } int __init -find_unisys_acpi_oem_table(unsigned long *oem_addr, int *length) +find_unisys_acpi_oem_table(unsigned long *oem_addr) { struct acpi_table_rsdp *rsdp = NULL; unsigned long rsdp_phys = 0; @@ -201,13 +202,11 @@ find_unisys_acpi_oem_table(unsigned long *oem_addr, int *length) acpi_table_print(header, sdt.entry[i].pa); t = (struct oem_table *) __acpi_map_table(sdt.entry[i].pa, header->length); addr = (void *) __acpi_map_table(t->OEMTableAddr, t->OEMTableSize); - *length = header->length; *oem_addr = (unsigned long) addr; return 0; } } } - Dprintk("ES7000: did not find Unisys ACPI OEM table!\n"); return -1; } diff --git a/arch/i386/mach-generic/bigsmp.c b/arch/i386/mach-generic/bigsmp.c index 25883b44f625..037b2af1a1f4 100644 --- a/arch/i386/mach-generic/bigsmp.c +++ b/arch/i386/mach-generic/bigsmp.c @@ -47,7 +47,10 @@ static struct dmi_system_id __initdata bigsmp_dmi_table[] = { static __init int probe_bigsmp(void) { - dmi_check_system(bigsmp_dmi_table); + if (def_to_bigsmp) + dmi_bigsmp = 1; + else + dmi_check_system(bigsmp_dmi_table); return dmi_bigsmp; } diff --git a/arch/i386/mach-generic/probe.c b/arch/i386/mach-generic/probe.c index 5497c65a8790..cea5b3ce4b57 100644 --- a/arch/i386/mach-generic/probe.c +++ b/arch/i386/mach-generic/probe.c @@ -30,6 +30,25 @@ struct genapic *apic_probe[] __initdata = { NULL, }; +static int cmdline_apic; + +void __init generic_bigsmp_probe(void) +{ + /* + * This routine is used to switch to bigsmp mode when + * - There is no apic= option specified by the user + * - generic_apic_probe() has choosen apic_default as the sub_arch + * - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support + */ + + if (!cmdline_apic && genapic == &apic_default) + if (apic_bigsmp.probe()) { + genapic = &apic_bigsmp; + printk(KERN_INFO "Overriding APIC driver with %s\n", + genapic->name); + } +} + void __init generic_apic_probe(char *command_line) { char *s; @@ -52,6 +71,7 @@ void __init generic_apic_probe(char *command_line) if (!changed) printk(KERN_ERR "Unknown genapic `%s' specified.\n", s); *p = old; + cmdline_apic = changed; } for (i = 0; !changed && apic_probe[i]; i++) { if (apic_probe[i]->probe()) { diff --git a/arch/i386/mach-voyager/voyager_basic.c b/arch/i386/mach-voyager/voyager_basic.c index c6384061328a..cc69875d979b 100644 --- a/arch/i386/mach-voyager/voyager_basic.c +++ b/arch/i386/mach-voyager/voyager_basic.c @@ -234,10 +234,9 @@ voyager_power_off(void) #endif } /* and wait for it to happen */ - for(;;) { - __asm("cli"); - __asm("hlt"); - } + local_irq_disable(); + for(;;) + halt(); } /* copied from process.c */ @@ -278,10 +277,9 @@ machine_restart(char *cmd) outb(basebd | 0x08, VOYAGER_MC_SETUP); outb(0x02, catbase + 0x21); } - for(;;) { - asm("cli"); - asm("hlt"); - } + local_irq_disable(); + for(;;) + halt(); } void diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/i386/mach-voyager/voyager_smp.c index 0e1f4208b07c..46b0cf4a31e0 100644 --- a/arch/i386/mach-voyager/voyager_smp.c +++ b/arch/i386/mach-voyager/voyager_smp.c @@ -242,6 +242,8 @@ static cpumask_t smp_commenced_mask = CPU_MASK_NONE; cpumask_t cpu_callin_map = CPU_MASK_NONE; cpumask_t cpu_callout_map = CPU_MASK_NONE; EXPORT_SYMBOL(cpu_callout_map); +cpumask_t cpu_possible_map = CPU_MASK_ALL; +EXPORT_SYMBOL(cpu_possible_map); /* The per processor IRQ masks (these are usually kept in sync) */ static __u16 vic_irq_mask[NR_CPUS] __cacheline_aligned; @@ -1015,7 +1017,7 @@ smp_stop_cpu_function(void *dummy) cpu_clear(smp_processor_id(), cpu_online_map); local_irq_disable(); for(;;) - __asm__("hlt"); + halt(); } static DEFINE_SPINLOCK(call_lock); @@ -1910,6 +1912,7 @@ void __devinit smp_prepare_boot_cpu(void) { cpu_set(smp_processor_id(), cpu_online_map); cpu_set(smp_processor_id(), cpu_callout_map); + cpu_set(smp_processor_id(), cpu_possible_map); } int __devinit diff --git a/arch/i386/math-emu/get_address.c b/arch/i386/math-emu/get_address.c index 91175738e948..9819b705efa4 100644 --- a/arch/i386/math-emu/get_address.c +++ b/arch/i386/math-emu/get_address.c @@ -155,7 +155,6 @@ static long pm_address(u_char FPU_modrm, u_char segment, { struct desc_struct descriptor; unsigned long base_address, limit, address, seg_top; - unsigned short selector; segment--; @@ -173,17 +172,11 @@ static long pm_address(u_char FPU_modrm, u_char segment, /* fs and gs aren't used by the kernel, so they still have their user-space values. */ case PREFIX_FS_-1: - /* The cast is needed here to get gcc 2.8.0 to use a 16 bit register - in the assembler statement. */ - - __asm__("mov %%fs,%0":"=r" (selector)); - addr->selector = selector; + /* N.B. - movl %seg, mem is a 2 byte write regardless of prefix */ + savesegment(fs, addr->selector); break; case PREFIX_GS_-1: - /* The cast is needed here to get gcc 2.8.0 to use a 16 bit register - in the assembler statement. */ - __asm__("mov %%gs,%0":"=r" (selector)); - addr->selector = selector; + savesegment(gs, addr->selector); break; default: addr->selector = PM_REG_(segment); diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c index 6711ce3f6916..244d8ec66be2 100644 --- a/arch/i386/mm/discontig.c +++ b/arch/i386/mm/discontig.c @@ -37,7 +37,7 @@ #include <asm/mmzone.h> #include <bios_ebda.h> -struct pglist_data *node_data[MAX_NUMNODES]; +struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; EXPORT_SYMBOL(node_data); bootmem_data_t node0_bdata; @@ -49,8 +49,8 @@ bootmem_data_t node0_bdata; * 2) node_start_pfn - the starting page frame number for a node * 3) node_end_pfn - the ending page fram number for a node */ -unsigned long node_start_pfn[MAX_NUMNODES]; -unsigned long node_end_pfn[MAX_NUMNODES]; +unsigned long node_start_pfn[MAX_NUMNODES] __read_mostly; +unsigned long node_end_pfn[MAX_NUMNODES] __read_mostly; #ifdef CONFIG_DISCONTIGMEM @@ -66,7 +66,7 @@ unsigned long node_end_pfn[MAX_NUMNODES]; * physnode_map[4-7] = 1; * physnode_map[8- ] = -1; */ -s8 physnode_map[MAX_ELEMENTS] = { [0 ... (MAX_ELEMENTS - 1)] = -1}; +s8 physnode_map[MAX_ELEMENTS] __read_mostly = { [0 ... (MAX_ELEMENTS - 1)] = -1}; EXPORT_SYMBOL(physnode_map); void memory_present(int nid, unsigned long start, unsigned long end) diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c index 8e90339d6eaa..9edd4485b91e 100644 --- a/arch/i386/mm/fault.c +++ b/arch/i386/mm/fault.c @@ -21,6 +21,7 @@ #include <linux/vt_kern.h> /* For unblank_screen() */ #include <linux/highmem.h> #include <linux/module.h> +#include <linux/kprobes.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -199,6 +200,18 @@ static inline int is_prefetch(struct pt_regs *regs, unsigned long addr, return 0; } +static noinline void force_sig_info_fault(int si_signo, int si_code, + unsigned long address, struct task_struct *tsk) +{ + siginfo_t info; + + info.si_signo = si_signo; + info.si_errno = 0; + info.si_code = si_code; + info.si_addr = (void __user *)address; + force_sig_info(si_signo, &info, tsk); +} + fastcall void do_invalid_op(struct pt_regs *, unsigned long); /* @@ -211,18 +224,18 @@ fastcall void do_invalid_op(struct pt_regs *, unsigned long); * bit 1 == 0 means read, 1 means write * bit 2 == 0 means kernel, 1 means user-mode */ -fastcall void do_page_fault(struct pt_regs *regs, unsigned long error_code) +fastcall void __kprobes do_page_fault(struct pt_regs *regs, + unsigned long error_code) { struct task_struct *tsk; struct mm_struct *mm; struct vm_area_struct * vma; unsigned long address; unsigned long page; - int write; - siginfo_t info; + int write, si_code; /* get the address */ - __asm__("movl %%cr2,%0":"=r" (address)); + address = read_cr2(); if (notify_die(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, SIGSEGV) == NOTIFY_STOP) @@ -233,7 +246,7 @@ fastcall void do_page_fault(struct pt_regs *regs, unsigned long error_code) tsk = current; - info.si_code = SEGV_MAPERR; + si_code = SEGV_MAPERR; /* * We fault-in kernel-space virtual memory on-demand. The @@ -313,7 +326,7 @@ fastcall void do_page_fault(struct pt_regs *regs, unsigned long error_code) * we can handle it.. */ good_area: - info.si_code = SEGV_ACCERR; + si_code = SEGV_ACCERR; write = 0; switch (error_code & 3) { default: /* 3: write, present */ @@ -387,11 +400,7 @@ bad_area_nosemaphore: /* Kernel addresses are always protection faults */ tsk->thread.error_code = error_code | (address >= TASK_SIZE); tsk->thread.trap_no = 14; - info.si_signo = SIGSEGV; - info.si_errno = 0; - /* info.si_code has been set above */ - info.si_addr = (void __user *)address; - force_sig_info(SIGSEGV, &info, tsk); + force_sig_info_fault(SIGSEGV, si_code, address, tsk); return; } @@ -446,7 +455,7 @@ no_context: printk(" at virtual address %08lx\n",address); printk(KERN_ALERT " printing eip:\n"); printk("%08lx\n", regs->eip); - asm("movl %%cr3,%0":"=r" (page)); + page = read_cr3(); page = ((unsigned long *) __va(page))[address >> 22]; printk(KERN_ALERT "*pde = %08lx\n", page); /* @@ -500,11 +509,7 @@ do_sigbus: tsk->thread.cr2 = address; tsk->thread.error_code = error_code; tsk->thread.trap_no = 14; - info.si_signo = SIGBUS; - info.si_errno = 0; - info.si_code = BUS_ADRERR; - info.si_addr = (void __user *)address; - force_sig_info(SIGBUS, &info, tsk); + force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk); return; vmalloc_fault: @@ -523,7 +528,7 @@ vmalloc_fault: pmd_t *pmd, *pmd_k; pte_t *pte_k; - asm("movl %%cr3,%0":"=r" (pgd_paddr)); + pgd_paddr = read_cr3(); pgd = index + (pgd_t *)__va(pgd_paddr); pgd_k = init_mm.pgd + index; diff --git a/arch/i386/mm/hugetlbpage.c b/arch/i386/mm/hugetlbpage.c index 3b099f32b948..d524127c9afc 100644 --- a/arch/i386/mm/hugetlbpage.c +++ b/arch/i386/mm/hugetlbpage.c @@ -22,12 +22,15 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) { pgd_t *pgd; pud_t *pud; - pmd_t *pmd = NULL; + pte_t *pte = NULL; pgd = pgd_offset(mm, addr); pud = pud_alloc(mm, pgd, addr); - pmd = pmd_alloc(mm, pud, addr); - return (pte_t *) pmd; + if (pud) + pte = (pte_t *) pmd_alloc(mm, pud, addr); + BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte)); + + return pte; } pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) @@ -37,8 +40,11 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) pmd_t *pmd = NULL; pgd = pgd_offset(mm, addr); - pud = pud_offset(pgd, addr); - pmd = pmd_offset(pud, addr); + if (pgd_present(*pgd)) { + pud = pud_offset(pgd, addr); + if (pud_present(*pud)) + pmd = pmd_offset(pud, addr); + } return (pte_t *) pmd; } @@ -118,17 +124,6 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address, } #endif -void hugetlb_clean_stale_pgtable(pte_t *pte) -{ - pmd_t *pmd = (pmd_t *) pte; - struct page *page; - - page = pmd_page(*pmd); - pmd_clear(pmd); - dec_page_state(nr_page_table_pages); - page_cache_release(page); -} - /* x86_64 also uses this file */ #ifdef HAVE_ARCH_HUGETLB_UNMAPPED_AREA diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c index 12216b52e28b..2ebaf75f732e 100644 --- a/arch/i386/mm/init.c +++ b/arch/i386/mm/init.c @@ -198,9 +198,10 @@ int page_is_ram(unsigned long pagenr) if (efi_enabled) { efi_memory_desc_t *md; + void *p; - for (i = 0; i < memmap.nr_map; i++) { - md = &memmap.map[i]; + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { + md = p; if (!is_available_memory(md)) continue; addr = (md->phys_addr+PAGE_SIZE-1) >> PAGE_SHIFT; @@ -348,7 +349,7 @@ static void __init pagetable_init (void) * All user-space mappings are explicitly cleared after * SMP startup. */ - pgd_base[0] = pgd_base[USER_PTRS_PER_PGD]; + set_pgd(&pgd_base[0], pgd_base[USER_PTRS_PER_PGD]); #endif } @@ -392,7 +393,7 @@ void zap_low_mappings (void) } static int disable_nx __initdata = 0; -u64 __supported_pte_mask = ~_PAGE_NX; +u64 __supported_pte_mask __read_mostly = ~_PAGE_NX; /* * noexec = on|off diff --git a/arch/i386/mm/pageattr.c b/arch/i386/mm/pageattr.c index cb3da6baa704..f600fc244f02 100644 --- a/arch/i386/mm/pageattr.c +++ b/arch/i386/mm/pageattr.c @@ -12,6 +12,7 @@ #include <asm/uaccess.h> #include <asm/processor.h> #include <asm/tlbflush.h> +#include <asm/pgalloc.h> static DEFINE_SPINLOCK(cpa_lock); static struct list_head df_list = LIST_HEAD_INIT(df_list); @@ -52,8 +53,8 @@ static struct page *split_large_page(unsigned long address, pgprot_t prot) addr = address & LARGE_PAGE_MASK; pbase = (pte_t *)page_address(base); for (i = 0; i < PTRS_PER_PTE; i++, addr += PAGE_SIZE) { - pbase[i] = pfn_pte(addr >> PAGE_SHIFT, - addr == address ? prot : PAGE_KERNEL); + set_pte(&pbase[i], pfn_pte(addr >> PAGE_SHIFT, + addr == address ? prot : PAGE_KERNEL)); } return base; } @@ -62,7 +63,7 @@ static void flush_kernel_map(void *dummy) { /* Could use CLFLUSH here if the CPU supports it (Hammer,P4) */ if (boot_cpu_data.x86_model >= 4) - asm volatile("wbinvd":::"memory"); + wbinvd(); /* Flush all to work around Errata in early athlons regarding * large page flushing. */ diff --git a/arch/i386/mm/pgtable.c b/arch/i386/mm/pgtable.c index bd2f7afc7a2a..dcdce2c6c532 100644 --- a/arch/i386/mm/pgtable.c +++ b/arch/i386/mm/pgtable.c @@ -207,19 +207,19 @@ void pgd_ctor(void *pgd, kmem_cache_t *cache, unsigned long unused) { unsigned long flags; - if (PTRS_PER_PMD == 1) + if (PTRS_PER_PMD == 1) { + memset(pgd, 0, USER_PTRS_PER_PGD*sizeof(pgd_t)); spin_lock_irqsave(&pgd_lock, flags); + } - memcpy((pgd_t *)pgd + USER_PTRS_PER_PGD, + clone_pgd_range((pgd_t *)pgd + USER_PTRS_PER_PGD, swapper_pg_dir + USER_PTRS_PER_PGD, - (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t)); - + KERNEL_PGD_PTRS); if (PTRS_PER_PMD > 1) return; pgd_list_add(pgd); spin_unlock_irqrestore(&pgd_lock, flags); - memset(pgd, 0, USER_PTRS_PER_PGD*sizeof(pgd_t)); } /* never called when PTRS_PER_PMD > 1 */ diff --git a/arch/i386/oprofile/init.c b/arch/i386/oprofile/init.c index c90332de582b..5341d481d92f 100644 --- a/arch/i386/oprofile/init.c +++ b/arch/i386/oprofile/init.c @@ -15,9 +15,9 @@ * with the NMI mode driver. */ -extern int nmi_init(struct oprofile_operations * ops); -extern int nmi_timer_init(struct oprofile_operations * ops); -extern void nmi_exit(void); +extern int op_nmi_init(struct oprofile_operations * ops); +extern int op_nmi_timer_init(struct oprofile_operations * ops); +extern void op_nmi_exit(void); extern void x86_backtrace(struct pt_regs * const regs, unsigned int depth); @@ -28,11 +28,11 @@ int __init oprofile_arch_init(struct oprofile_operations * ops) ret = -ENODEV; #ifdef CONFIG_X86_LOCAL_APIC - ret = nmi_init(ops); + ret = op_nmi_init(ops); #endif #ifdef CONFIG_X86_IO_APIC if (ret < 0) - ret = nmi_timer_init(ops); + ret = op_nmi_timer_init(ops); #endif ops->backtrace = x86_backtrace; @@ -43,6 +43,6 @@ int __init oprofile_arch_init(struct oprofile_operations * ops) void oprofile_arch_exit(void) { #ifdef CONFIG_X86_LOCAL_APIC - nmi_exit(); + op_nmi_exit(); #endif } diff --git a/arch/i386/oprofile/nmi_int.c b/arch/i386/oprofile/nmi_int.c index 255e4702d185..0493e8b8ec49 100644 --- a/arch/i386/oprofile/nmi_int.c +++ b/arch/i386/oprofile/nmi_int.c @@ -355,7 +355,7 @@ static int __init ppro_init(char ** cpu_type) /* in order to get driverfs right */ static int using_nmi; -int __init nmi_init(struct oprofile_operations *ops) +int __init op_nmi_init(struct oprofile_operations *ops) { __u8 vendor = boot_cpu_data.x86_vendor; __u8 family = boot_cpu_data.x86; @@ -420,7 +420,7 @@ int __init nmi_init(struct oprofile_operations *ops) } -void nmi_exit(void) +void op_nmi_exit(void) { if (using_nmi) exit_driverfs(); diff --git a/arch/i386/oprofile/nmi_timer_int.c b/arch/i386/oprofile/nmi_timer_int.c index c58d0c14f274..ad93cdd55d63 100644 --- a/arch/i386/oprofile/nmi_timer_int.c +++ b/arch/i386/oprofile/nmi_timer_int.c @@ -40,7 +40,7 @@ static void timer_stop(void) } -int __init nmi_timer_init(struct oprofile_operations * ops) +int __init op_nmi_timer_init(struct oprofile_operations * ops) { extern int nmi_active; diff --git a/arch/i386/pci/Makefile b/arch/i386/pci/Makefile index 1bff03f36965..ead6122dd06d 100644 --- a/arch/i386/pci/Makefile +++ b/arch/i386/pci/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o obj-$(CONFIG_PCI_DIRECT) += direct.o pci-y := fixup.o -pci-$(CONFIG_ACPI_PCI) += acpi.o +pci-$(CONFIG_ACPI) += acpi.o pci-y += legacy.o irq.o pci-$(CONFIG_X86_VISWS) := visws.o fixup.o diff --git a/arch/i386/pci/acpi.c b/arch/i386/pci/acpi.c index 42913f43feb0..2941674f35eb 100644 --- a/arch/i386/pci/acpi.c +++ b/arch/i386/pci/acpi.c @@ -3,16 +3,31 @@ #include <linux/init.h> #include <linux/irq.h> #include <asm/hw_irq.h> +#include <asm/numa.h> #include "pci.h" struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum) { + struct pci_bus *bus; + if (domain != 0) { printk(KERN_WARNING "PCI: Multiple domains not supported\n"); return NULL; } - return pcibios_scan_root(busnum); + bus = pcibios_scan_root(busnum); +#ifdef CONFIG_ACPI_NUMA + if (bus != NULL) { + int pxm = acpi_get_pxm(device->handle); + if (pxm >= 0) { + bus->sysdata = (void *)(unsigned long)pxm_to_node(pxm); + printk("bus %d -> pxm %d -> node %ld\n", + busnum, pxm, (long)(bus->sysdata)); + } + } +#endif + + return bus; } extern int pci_routeirq; diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c index ade5bc57c34c..c96bea14b98f 100644 --- a/arch/i386/pci/common.c +++ b/arch/i386/pci/common.c @@ -165,7 +165,6 @@ static int __init pcibios_init(void) if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT)) pcibios_sort(); #endif - pci_assign_unassigned_resources(); return 0; } diff --git a/arch/i386/pci/i386.c b/arch/i386/pci/i386.c index 93a364c82150..6d6338500c3c 100644 --- a/arch/i386/pci/i386.c +++ b/arch/i386/pci/i386.c @@ -170,43 +170,26 @@ static void __init pcibios_allocate_resources(int pass) static int __init pcibios_assign_resources(void) { struct pci_dev *dev = NULL; - int idx; - struct resource *r; - - for_each_pci_dev(dev) { - int class = dev->class >> 8; - - /* Don't touch classless devices and host bridges */ - if (!class || class == PCI_CLASS_BRIDGE_HOST) - continue; - - for(idx=0; idx<6; idx++) { - r = &dev->resource[idx]; - - /* - * Don't touch IDE controllers and I/O ports of video cards! - */ - if ((class == PCI_CLASS_STORAGE_IDE && idx < 4) || - (class == PCI_CLASS_DISPLAY_VGA && (r->flags & IORESOURCE_IO))) - continue; - - /* - * We shall assign a new address to this resource, either because - * the BIOS forgot to do so or because we have decided the old - * address was unusable for some reason. - */ - if (!r->start && r->end) - pci_assign_resource(dev, idx); - } + struct resource *r, *pr; - if (pci_probe & PCI_ASSIGN_ROMS) { + if (!(pci_probe & PCI_ASSIGN_ROMS)) { + /* Try to use BIOS settings for ROMs, otherwise let + pci_assign_unassigned_resources() allocate the new + addresses. */ + for_each_pci_dev(dev) { r = &dev->resource[PCI_ROM_RESOURCE]; - r->end -= r->start; - r->start = 0; - if (r->end) - pci_assign_resource(dev, PCI_ROM_RESOURCE); + if (!r->flags || !r->start) + continue; + pr = pci_find_parent_resource(dev, r); + if (!pr || request_resource(pr, r) < 0) { + r->end -= r->start; + r->start = 0; + } } } + + pci_assign_unassigned_resources(); + return 0; } @@ -300,9 +283,9 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, /* Write-combine setting is ignored, it is changed via the mtrr * interfaces on this platform. */ - if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, - vma->vm_end - vma->vm_start, - vma->vm_page_prot)) + if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, + vma->vm_page_prot)) return -EAGAIN; return 0; diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c index 86348b68fda1..326a2edc3834 100644 --- a/arch/i386/pci/irq.c +++ b/arch/i386/pci/irq.c @@ -1075,7 +1075,7 @@ static void pirq_penalize_isa_irq(int irq, int active) void pcibios_penalize_isa_irq(int irq, int active) { -#ifdef CONFIG_ACPI_PCI +#ifdef CONFIG_ACPI if (!acpi_noirq) acpi_penalize_isa_irq(irq, active); else diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index 60f0e7a1162a..dfbf80cff834 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -127,13 +127,6 @@ static int __init pci_mmcfg_init(void) (pci_mmcfg_config[0].base_address == 0)) goto out; - /* Kludge for now. Don't use mmconfig on AMD systems because - those have some busses where mmconfig doesn't work, - and we don't parse ACPI MCFG well enough to handle that. - Remove when proper handling is added. */ - if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) - goto out; - printk(KERN_INFO "PCI: Using MMCONFIG\n"); raw_pci_ops = &pci_mmcfg; pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; diff --git a/arch/i386/power/cpu.c b/arch/i386/power/cpu.c index c547c1af6fa1..7b0b9ad848e5 100644 --- a/arch/i386/power/cpu.c +++ b/arch/i386/power/cpu.c @@ -42,25 +42,25 @@ void __save_processor_state(struct saved_context *ctxt) /* * descriptor tables */ - asm volatile ("sgdt %0" : "=m" (ctxt->gdt_limit)); - asm volatile ("sidt %0" : "=m" (ctxt->idt_limit)); - asm volatile ("str %0" : "=m" (ctxt->tr)); + store_gdt(&ctxt->gdt_limit); + store_idt(&ctxt->idt_limit); + store_tr(ctxt->tr); /* * segment registers */ - asm volatile ("movw %%es, %0" : "=m" (ctxt->es)); - asm volatile ("movw %%fs, %0" : "=m" (ctxt->fs)); - asm volatile ("movw %%gs, %0" : "=m" (ctxt->gs)); - asm volatile ("movw %%ss, %0" : "=m" (ctxt->ss)); + savesegment(es, ctxt->es); + savesegment(fs, ctxt->fs); + savesegment(gs, ctxt->gs); + savesegment(ss, ctxt->ss); /* * control registers */ - asm volatile ("movl %%cr0, %0" : "=r" (ctxt->cr0)); - asm volatile ("movl %%cr2, %0" : "=r" (ctxt->cr2)); - asm volatile ("movl %%cr3, %0" : "=r" (ctxt->cr3)); - asm volatile ("movl %%cr4, %0" : "=r" (ctxt->cr4)); + ctxt->cr0 = read_cr0(); + ctxt->cr2 = read_cr2(); + ctxt->cr3 = read_cr3(); + ctxt->cr4 = read_cr4(); } void save_processor_state(void) @@ -84,7 +84,6 @@ static void fix_processor_context(void) struct tss_struct * t = &per_cpu(init_tss, cpu); set_tss_desc(cpu,t); /* This just modifies memory; should not be necessary. But... This is necessary, because 386 hardware has concept of busy TSS or some similar stupidity. */ - per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_TSS].b &= 0xfffffdff; load_TR_desc(); /* This does ltr */ load_LDT(¤t->active_mm->context); /* This does lldt */ @@ -109,25 +108,25 @@ void __restore_processor_state(struct saved_context *ctxt) /* * control registers */ - asm volatile ("movl %0, %%cr4" :: "r" (ctxt->cr4)); - asm volatile ("movl %0, %%cr3" :: "r" (ctxt->cr3)); - asm volatile ("movl %0, %%cr2" :: "r" (ctxt->cr2)); - asm volatile ("movl %0, %%cr0" :: "r" (ctxt->cr0)); + write_cr4(ctxt->cr4); + write_cr3(ctxt->cr3); + write_cr2(ctxt->cr2); + write_cr2(ctxt->cr0); /* * now restore the descriptor tables to their proper values * ltr is done i fix_processor_context(). */ - asm volatile ("lgdt %0" :: "m" (ctxt->gdt_limit)); - asm volatile ("lidt %0" :: "m" (ctxt->idt_limit)); + load_gdt(&ctxt->gdt_limit); + load_idt(&ctxt->idt_limit); /* * segment registers */ - asm volatile ("movw %0, %%es" :: "r" (ctxt->es)); - asm volatile ("movw %0, %%fs" :: "r" (ctxt->fs)); - asm volatile ("movw %0, %%gs" :: "r" (ctxt->gs)); - asm volatile ("movw %0, %%ss" :: "r" (ctxt->ss)); + loadsegment(es, ctxt->es); + loadsegment(fs, ctxt->fs); + loadsegment(gs, ctxt->gs); + loadsegment(ss, ctxt->ss); /* * sysenter MSRs diff --git a/arch/i386/power/swsusp.S b/arch/i386/power/swsusp.S index c4105286ff26..c893b897217f 100644 --- a/arch/i386/power/swsusp.S +++ b/arch/i386/power/swsusp.S @@ -12,7 +12,7 @@ #include <linux/linkage.h> #include <asm/segment.h> #include <asm/page.h> -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> .text diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 80988136f26d..ed25d66c8d50 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -60,6 +60,7 @@ choice config IA64_GENERIC bool "generic" + select ACPI select NUMA select ACPI_NUMA select VIRTUAL_MEM_MAP @@ -338,11 +339,6 @@ config IA64_PALINFO To use this option, you have to ensure that the "/proc file system support" (CONFIG_PROC_FS) is enabled, too. -config ACPI_DEALLOCATE_IRQ - bool - depends on IOSAPIC && EXPERIMENTAL - default y - source "drivers/firmware/Kconfig" source "fs/Kconfig.binfmt" @@ -351,36 +347,14 @@ endmenu menu "Power management and ACPI" -config PM - bool "Power Management support" - depends on !IA64_HP_SIM - default y - help - "Power Management" means that parts of your computer are shut - off or put into a power conserving "sleep" mode if they are not - being used. There are two competing standards for doing this: APM - and ACPI. If you want to use either one, say Y here and then also - to the requisite support below. - - Power Management is most important for battery powered laptop - computers; if you have a laptop, check out the Linux Laptop home - page on the WWW at <http://www.linux-on-laptops.com/> and the - Battery Powered Linux mini-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - Note that, even if you say N here, Linux on the x86 architecture - will issue the hlt instruction if nothing is to be done, thereby - sending the processor to sleep and saving power. - -config ACPI - bool - depends on !IA64_HP_SIM - default y - -if !IA64_HP_SIM +source "kernel/power/Kconfig" source "drivers/acpi/Kconfig" +if PM + +source "arch/ia64/kernel/cpufreq/Kconfig" + endif endmenu @@ -428,6 +402,11 @@ config GENERIC_IRQ_PROBE bool default y +config GENERIC_PENDING_IRQ + bool + depends on GENERIC_HARDIRQS && SMP + default y + source "arch/ia64/hp/sim/Kconfig" source "arch/ia64/oprofile/Kconfig" diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile index f9bd88ada708..70f8ed2748d1 100644 --- a/arch/ia64/Makefile +++ b/arch/ia64/Makefile @@ -82,25 +82,18 @@ unwcheck: vmlinux archclean: $(Q)$(MAKE) $(clean)=$(boot) -CLEAN_FILES += include/asm-ia64/.offsets.h.stamp vmlinux.gz bootloader - -MRPROPER_FILES += include/asm-ia64/offsets.h - -prepare: include/asm-ia64/offsets.h - -arch/ia64/kernel/asm-offsets.s: include/asm include/linux/version.h include/config/MARKER - -include/asm-ia64/offsets.h: arch/ia64/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) - -arch/ia64/kernel/asm-offsets.s: include/asm-ia64/.offsets.h.stamp +archprepare: include/asm-ia64/.offsets.h.stamp include/asm-ia64/.offsets.h.stamp: mkdir -p include/asm-ia64 - [ -s include/asm-ia64/offsets.h ] \ - || echo "#define IA64_TASK_SIZE 0" > include/asm-ia64/offsets.h + [ -s include/asm-ia64/asm-offsets.h ] \ + || echo "#define IA64_TASK_SIZE 0" > include/asm-ia64/asm-offsets.h touch $@ + + +CLEAN_FILES += vmlinux.gz bootloader include/asm-ia64/.offsets.h.stamp + boot: lib/lib.a vmlinux $(Q)$(MAKE) $(build)=$(boot) $@ diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index b95fcf86ea00..3b65cbb31b1d 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -107,18 +107,12 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index dccf35c60b94..08112ab38468 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -111,7 +111,6 @@ CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y -CONFIG_ACPI_DEALLOCATE_IRQ=y # # Firmware Drivers @@ -130,19 +129,12 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y # CONFIG_ACPI_BUTTON is not set -CONFIG_ACPI_VIDEO=m -CONFIG_ACPI_HOTKEY=m # CONFIG_ACPI_FAN is not set # CONFIG_ACPI_PROCESSOR is not set CONFIG_ACPI_NUMA=y -CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index c853cfcd2d11..d452e18ac494 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -109,7 +109,6 @@ CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y -CONFIG_ACPI_DEALLOCATE_IRQ=y # # Firmware Drivers @@ -128,20 +127,13 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_BUTTON=m -# CONFIG_ACPI_VIDEO is not set -# CONFIG_ACPI_HOTKEY is not set CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m # CONFIG_ACPI_HOTPLUG_CPU is not set CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index 88e8867fa8e8..80b0e9eb7fb3 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -109,7 +109,6 @@ CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y -CONFIG_ACPI_DEALLOCATE_IRQ=y # # Firmware Drivers @@ -128,19 +127,12 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_VIDEO=m -CONFIG_ACPI_HOTKEY=m CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y -CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index 8444add76380..5da208115ea1 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -99,7 +99,6 @@ CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y -CONFIG_ACPI_DEALLOCATE_IRQ=y # # Firmware Drivers @@ -118,20 +117,14 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y -CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m @@ -341,7 +334,7 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -CONFIG_SCSI_QLOGIC_FC=y +# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_QLOGIC_1280_1040 is not set diff --git a/arch/ia64/hp/sim/boot/boot_head.S b/arch/ia64/hp/sim/boot/boot_head.S index 1c8c7e6a9a5e..a9bd71ac78e2 100644 --- a/arch/ia64/hp/sim/boot/boot_head.S +++ b/arch/ia64/hp/sim/boot/boot_head.S @@ -4,6 +4,7 @@ */ #include <asm/asmmacro.h> +#include <asm/pal.h> .bss .align 16 @@ -49,7 +50,11 @@ GLOBAL_ENTRY(jmp_to_kernel) br.sptk.few b7 END(jmp_to_kernel) - +/* + * r28 contains the index of the PAL function + * r29--31 the args + * Return values in ret0--3 (r8--11) + */ GLOBAL_ENTRY(pal_emulator_static) mov r8=-1 mov r9=256 @@ -62,7 +67,7 @@ GLOBAL_ENTRY(pal_emulator_static) cmp.gtu p6,p7=r9,r28 (p6) br.cond.sptk.few stacked ;; -static: cmp.eq p6,p7=6,r28 /* PAL_PTCE_INFO */ +static: cmp.eq p6,p7=PAL_PTCE_INFO,r28 (p7) br.cond.sptk.few 1f ;; mov r8=0 /* status = 0 */ @@ -70,21 +75,21 @@ static: cmp.eq p6,p7=6,r28 /* PAL_PTCE_INFO */ movl r10=0x0000000200000003 /* count[0], count[1] */ movl r11=0x1000000000002000 /* stride[0], stride[1] */ br.cond.sptk.few rp -1: cmp.eq p6,p7=14,r28 /* PAL_FREQ_RATIOS */ +1: cmp.eq p6,p7=PAL_FREQ_RATIOS,r28 (p7) br.cond.sptk.few 1f mov r8=0 /* status = 0 */ movl r9 =0x100000064 /* proc_ratio (1/100) */ movl r10=0x100000100 /* bus_ratio<<32 (1/256) */ movl r11=0x100000064 /* itc_ratio<<32 (1/100) */ ;; -1: cmp.eq p6,p7=19,r28 /* PAL_RSE_INFO */ +1: cmp.eq p6,p7=PAL_RSE_INFO,r28 (p7) br.cond.sptk.few 1f mov r8=0 /* status = 0 */ mov r9=96 /* num phys stacked */ mov r10=0 /* hints */ mov r11=0 br.cond.sptk.few rp -1: cmp.eq p6,p7=1,r28 /* PAL_CACHE_FLUSH */ +1: cmp.eq p6,p7=PAL_CACHE_FLUSH,r28 /* PAL_CACHE_FLUSH */ (p7) br.cond.sptk.few 1f mov r9=ar.lc movl r8=524288 /* flush 512k million cache lines (16MB) */ @@ -102,7 +107,7 @@ static: cmp.eq p6,p7=6,r28 /* PAL_PTCE_INFO */ mov ar.lc=r9 mov r8=r0 ;; -1: cmp.eq p6,p7=15,r28 /* PAL_PERF_MON_INFO */ +1: cmp.eq p6,p7=PAL_PERF_MON_INFO,r28 (p7) br.cond.sptk.few 1f mov r8=0 /* status = 0 */ movl r9 =0x08122f04 /* generic=4 width=47 retired=8 cycles=18 */ @@ -138,6 +143,20 @@ static: cmp.eq p6,p7=6,r28 /* PAL_PTCE_INFO */ st8 [r29]=r0,16 /* clear remaining bits */ st8 [r18]=r0,16 /* clear remaining bits */ ;; +1: cmp.eq p6,p7=PAL_VM_SUMMARY,r28 +(p7) br.cond.sptk.few 1f + mov r8=0 /* status = 0 */ + movl r9=0x2044040020F1865 /* num_tc_levels=2, num_unique_tcs=4 */ + /* max_itr_entry=64, max_dtr_entry=64 */ + /* hash_tag_id=2, max_pkr=15 */ + /* key_size=24, phys_add_size=50, vw=1 */ + movl r10=0x183C /* rid_size=24, impl_va_msb=60 */ + ;; +1: cmp.eq p6,p7=PAL_MEM_ATTRIB,r28 +(p7) br.cond.sptk.few 1f + mov r8=0 /* status = 0 */ + mov r9=0x80|0x01 /* NatPage|WB */ + ;; 1: br.cond.sptk.few rp stacked: br.ret.sptk.few rp diff --git a/arch/ia64/hp/sim/boot/fw-emu.c b/arch/ia64/hp/sim/boot/fw-emu.c index 5c46928e3dc6..30fdfb1d0a53 100644 --- a/arch/ia64/hp/sim/boot/fw-emu.c +++ b/arch/ia64/hp/sim/boot/fw-emu.c @@ -237,17 +237,6 @@ sal_emulator (long index, unsigned long in1, unsigned long in2, return ((struct sal_ret_values) {status, r9, r10, r11}); } - -/* - * This is here to work around a bug in egcs-1.1.1b that causes the - * compiler to crash (seems like a bug in the new alias analysis code. - */ -void * -id (long addr) -{ - return (void *) addr; -} - struct ia64_boot_param * sys_fw_init (const char *args, int arglen) { diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index 7dcb8582ae0d..b42ec37be51c 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -130,7 +130,7 @@ static void rs_stop(struct tty_struct *tty) static void rs_start(struct tty_struct *tty) { -#if SIMSERIAL_DEBUG +#ifdef SIMSERIAL_DEBUG printk("rs_start: tty->stopped=%d tty->hw_stopped=%d tty->flow_stopped=%d\n", tty->stopped, tty->hw_stopped, tty->flow_stopped); #endif diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S index 829a6d80711c..494fad6bf376 100644 --- a/arch/ia64/ia32/ia32_entry.S +++ b/arch/ia64/ia32/ia32_entry.S @@ -1,6 +1,6 @@ #include <asm/asmmacro.h> #include <asm/ia32.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/signal.h> #include <asm/thread_info.h> @@ -215,7 +215,7 @@ ia32_syscall_table: data8 sys32_fork data8 sys_read data8 sys_write - data8 sys32_open /* 5 */ + data8 compat_sys_open /* 5 */ data8 sys_close data8 sys32_waitpid data8 sys_creat diff --git a/arch/ia64/ia32/ia32_signal.c b/arch/ia64/ia32/ia32_signal.c index ebb89be2aa2d..aa891c9bc9b6 100644 --- a/arch/ia64/ia32/ia32_signal.c +++ b/arch/ia64/ia32/ia32_signal.c @@ -29,7 +29,6 @@ #include <asm/uaccess.h> #include <asm/rse.h> #include <asm/sigcontext.h> -#include <asm/segment.h> #include "ia32priv.h" diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index c1e20d65dd6c..3fa67ecebc83 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -2327,7 +2327,7 @@ sys32_sendfile (int out_fd, int in_fd, int __user *offset, unsigned int count) ret = sys_sendfile(out_fd, in_fd, offset ? (off_t __user *) &of : NULL, count); set_fs(old_fs); - if (!ret && offset && put_user(of, offset)) + if (offset && put_user(of, offset)) return -EFAULT; return ret; @@ -2359,37 +2359,6 @@ sys32_brk (unsigned int brk) return ret; } -/* - * Exactly like fs/open.c:sys_open(), except that it doesn't set the O_LARGEFILE flag. - */ -asmlinkage long -sys32_open (const char __user * filename, int flags, int mode) -{ - char * tmp; - int fd, error; - - tmp = getname(filename); - fd = PTR_ERR(tmp); - if (!IS_ERR(tmp)) { - fd = get_unused_fd(); - if (fd >= 0) { - struct file *f = filp_open(tmp, flags, mode); - error = PTR_ERR(f); - if (IS_ERR(f)) - goto out_error; - fd_install(fd, f); - } -out: - putname(tmp); - } - return fd; - -out_error: - put_unused_fd(fd); - fd = error; - goto out; -} - /* Structure for ia32 emulation on ia64 */ struct epoll_event32 { diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index e1fb68ddec26..307514f7a282 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -16,10 +16,11 @@ obj-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += acpi-ext.o obj-$(CONFIG_IA64_PALINFO) += palinfo.o obj-$(CONFIG_IOSAPIC) += iosapic.o obj-$(CONFIG_MODULES) += module.o -obj-$(CONFIG_SMP) += smp.o smpboot.o domain.o +obj-$(CONFIG_SMP) += smp.o smpboot.o obj-$(CONFIG_NUMA) += numa.o obj-$(CONFIG_PERFMON) += perfmon_default_smpl.o obj-$(CONFIG_IA64_CYCLONE) += cyclone.o +obj-$(CONFIG_CPU_FREQ) += cpufreq/ obj-$(CONFIG_IA64_MCA_RECOVERY) += mca_recovery.o obj-$(CONFIG_KPROBES) += kprobes.o jprobes.o obj-$(CONFIG_IA64_UNCACHED_ALLOCATOR) += uncached.o diff --git a/arch/ia64/kernel/acpi-ext.c b/arch/ia64/kernel/acpi-ext.c index 2623df5e2633..13a5b3b49bf8 100644 --- a/arch/ia64/kernel/acpi-ext.c +++ b/arch/ia64/kernel/acpi-ext.c @@ -17,20 +17,20 @@ #include <asm/acpi-ext.h> struct acpi_vendor_descriptor { - u8 guid_id; - efi_guid_t guid; + u8 guid_id; + efi_guid_t guid; }; struct acpi_vendor_info { - struct acpi_vendor_descriptor *descriptor; - u8 *data; - u32 length; + struct acpi_vendor_descriptor *descriptor; + u8 *data; + u32 length; }; acpi_status acpi_vendor_resource_match(struct acpi_resource *resource, void *context) { - struct acpi_vendor_info *info = (struct acpi_vendor_info *) context; + struct acpi_vendor_info *info = (struct acpi_vendor_info *)context; struct acpi_resource_vendor *vendor; struct acpi_vendor_descriptor *descriptor; u32 length; @@ -38,8 +38,8 @@ acpi_vendor_resource_match(struct acpi_resource *resource, void *context) if (resource->id != ACPI_RSTYPE_VENDOR) return AE_OK; - vendor = (struct acpi_resource_vendor *) &resource->data; - descriptor = (struct acpi_vendor_descriptor *) vendor->reserved; + vendor = (struct acpi_resource_vendor *)&resource->data; + descriptor = (struct acpi_vendor_descriptor *)vendor->reserved; if (vendor->length <= sizeof(*info->descriptor) || descriptor->guid_id != info->descriptor->guid_id || efi_guidcmp(descriptor->guid, info->descriptor->guid)) @@ -50,21 +50,24 @@ acpi_vendor_resource_match(struct acpi_resource *resource, void *context) if (!info->data) return AE_NO_MEMORY; - memcpy(info->data, vendor->reserved + sizeof(struct acpi_vendor_descriptor), length); + memcpy(info->data, + vendor->reserved + sizeof(struct acpi_vendor_descriptor), + length); info->length = length; return AE_CTRL_TERMINATE; } acpi_status -acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor *id, - u8 **data, u32 *length) +acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor * id, + u8 ** data, u32 * length) { struct acpi_vendor_info info; info.descriptor = id; info.data = NULL; - acpi_walk_resources(obj, METHOD_NAME__CRS, acpi_vendor_resource_match, &info); + acpi_walk_resources(obj, METHOD_NAME__CRS, acpi_vendor_resource_match, + &info); if (!info.data) return AE_NOT_FOUND; @@ -75,17 +78,19 @@ acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor *id, struct acpi_vendor_descriptor hp_ccsr_descriptor = { .guid_id = 2, - .guid = EFI_GUID(0x69e9adf9, 0x924f, 0xab5f, 0xf6, 0x4a, 0x24, 0xd2, 0x01, 0x37, 0x0e, 0xad) + .guid = + EFI_GUID(0x69e9adf9, 0x924f, 0xab5f, 0xf6, 0x4a, 0x24, 0xd2, 0x01, + 0x37, 0x0e, 0xad) }; -acpi_status -hp_acpi_csr_space(acpi_handle obj, u64 *csr_base, u64 *csr_length) +acpi_status hp_acpi_csr_space(acpi_handle obj, u64 * csr_base, u64 * csr_length) { acpi_status status; u8 *data; u32 length; - status = acpi_find_vendor_resource(obj, &hp_ccsr_descriptor, &data, &length); + status = + acpi_find_vendor_resource(obj, &hp_ccsr_descriptor, &data, &length); if (ACPI_FAILURE(status) || length != 16) return AE_NOT_FOUND; diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 9609f243e5d0..28a4529fdd60 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -74,12 +74,11 @@ unsigned int acpi_cpei_override; unsigned int acpi_cpei_phys_cpuid; #define MAX_SAPICS 256 -u16 ia64_acpiid_to_sapicid[MAX_SAPICS] = - { [0 ... MAX_SAPICS - 1] = -1 }; +u16 ia64_acpiid_to_sapicid[MAX_SAPICS] = {[0 ... MAX_SAPICS - 1] = -1 }; + EXPORT_SYMBOL(ia64_acpiid_to_sapicid); -const char * -acpi_get_sysname (void) +const char *acpi_get_sysname(void) { #ifdef CONFIG_IA64_GENERIC unsigned long rsdp_phys; @@ -89,27 +88,29 @@ acpi_get_sysname (void) rsdp_phys = acpi_find_rsdp(); if (!rsdp_phys) { - printk(KERN_ERR "ACPI 2.0 RSDP not found, default to \"dig\"\n"); + printk(KERN_ERR + "ACPI 2.0 RSDP not found, default to \"dig\"\n"); return "dig"; } - rsdp = (struct acpi20_table_rsdp *) __va(rsdp_phys); + rsdp = (struct acpi20_table_rsdp *)__va(rsdp_phys); if (strncmp(rsdp->signature, RSDP_SIG, sizeof(RSDP_SIG) - 1)) { - printk(KERN_ERR "ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n"); + printk(KERN_ERR + "ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n"); return "dig"; } - xsdt = (struct acpi_table_xsdt *) __va(rsdp->xsdt_address); + xsdt = (struct acpi_table_xsdt *)__va(rsdp->xsdt_address); hdr = &xsdt->header; if (strncmp(hdr->signature, XSDT_SIG, sizeof(XSDT_SIG) - 1)) { - printk(KERN_ERR "ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n"); + printk(KERN_ERR + "ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n"); return "dig"; } if (!strcmp(hdr->oem_id, "HP")) { return "hpzx1"; - } - else if (!strcmp(hdr->oem_id, "SGI")) { + } else if (!strcmp(hdr->oem_id, "SGI")) { return "sn2"; } @@ -131,7 +132,7 @@ acpi_get_sysname (void) #endif } -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI #define ACPI_MAX_PLATFORM_INTERRUPTS 256 @@ -146,8 +147,7 @@ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_IOSAPIC; * Interrupt routing API for device drivers. Provides interrupt vector for * a generic platform event. Currently only CPEI is implemented. */ -int -acpi_request_vector (u32 int_type) +int acpi_request_vector(u32 int_type) { int vector = -1; @@ -155,12 +155,12 @@ acpi_request_vector (u32 int_type) /* corrected platform error interrupt */ vector = platform_intr_list[int_type]; } else - printk(KERN_ERR "acpi_request_vector(): invalid interrupt type\n"); + printk(KERN_ERR + "acpi_request_vector(): invalid interrupt type\n"); return vector; } -char * -__acpi_map_table (unsigned long phys_addr, unsigned long size) +char *__acpi_map_table(unsigned long phys_addr, unsigned long size) { return __va(phys_addr); } @@ -169,19 +169,18 @@ __acpi_map_table (unsigned long phys_addr, unsigned long size) Boot-time Table Parsing -------------------------------------------------------------------------- */ -static int total_cpus __initdata; -static int available_cpus __initdata; -struct acpi_table_madt * acpi_madt __initdata; -static u8 has_8259; - +static int total_cpus __initdata; +static int available_cpus __initdata; +struct acpi_table_madt *acpi_madt __initdata; +static u8 has_8259; static int __init -acpi_parse_lapic_addr_ovr ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic_addr_ovr(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_lapic_addr_ovr *lapic; - lapic = (struct acpi_table_lapic_addr_ovr *) header; + lapic = (struct acpi_table_lapic_addr_ovr *)header; if (BAD_MADT_ENTRY(lapic, end)) return -EINVAL; @@ -193,22 +192,23 @@ acpi_parse_lapic_addr_ovr ( return 0; } - static int __init -acpi_parse_lsapic (acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lsapic(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_lsapic *lsapic; - lsapic = (struct acpi_table_lsapic *) header; + lsapic = (struct acpi_table_lsapic *)header; if (BAD_MADT_ENTRY(lsapic, end)) return -EINVAL; if (lsapic->flags.enabled) { #ifdef CONFIG_SMP - smp_boot_data.cpu_phys_id[available_cpus] = (lsapic->id << 8) | lsapic->eid; + smp_boot_data.cpu_phys_id[available_cpus] = + (lsapic->id << 8) | lsapic->eid; #endif - ia64_acpiid_to_sapicid[lsapic->acpi_id] = (lsapic->id << 8) | lsapic->eid; + ia64_acpiid_to_sapicid[lsapic->acpi_id] = + (lsapic->id << 8) | lsapic->eid; ++available_cpus; } @@ -216,13 +216,12 @@ acpi_parse_lsapic (acpi_table_entry_header *header, const unsigned long end) return 0; } - static int __init -acpi_parse_lapic_nmi (acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_lapic_nmi *lacpi_nmi; - lacpi_nmi = (struct acpi_table_lapic_nmi*) header; + lacpi_nmi = (struct acpi_table_lapic_nmi *)header; if (BAD_MADT_ENTRY(lacpi_nmi, end)) return -EINVAL; @@ -231,13 +230,12 @@ acpi_parse_lapic_nmi (acpi_table_entry_header *header, const unsigned long end) return 0; } - static int __init -acpi_parse_iosapic (acpi_table_entry_header *header, const unsigned long end) +acpi_parse_iosapic(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_iosapic *iosapic; - iosapic = (struct acpi_table_iosapic *) header; + iosapic = (struct acpi_table_iosapic *)header; if (BAD_MADT_ENTRY(iosapic, end)) return -EINVAL; @@ -245,15 +243,14 @@ acpi_parse_iosapic (acpi_table_entry_header *header, const unsigned long end) return iosapic_init(iosapic->address, iosapic->global_irq_base); } - static int __init -acpi_parse_plat_int_src ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_plat_int_src(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_plat_int_src *plintsrc; int vector; - plintsrc = (struct acpi_table_plat_int_src *) header; + plintsrc = (struct acpi_table_plat_int_src *)header; if (BAD_MADT_ENTRY(plintsrc, end)) return -EINVAL; @@ -267,8 +264,12 @@ acpi_parse_plat_int_src ( plintsrc->iosapic_vector, plintsrc->eid, plintsrc->id, - (plintsrc->flags.polarity == 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, - (plintsrc->flags.trigger == 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); + (plintsrc->flags.polarity == + 1) ? IOSAPIC_POL_HIGH : + IOSAPIC_POL_LOW, + (plintsrc->flags.trigger == + 1) ? IOSAPIC_EDGE : + IOSAPIC_LEVEL); platform_intr_list[plintsrc->type] = vector; if (acpi_madt_rev > 1) { @@ -283,7 +284,6 @@ acpi_parse_plat_int_src ( return 0; } - unsigned int can_cpei_retarget(void) { extern int cpe_vector; @@ -322,29 +322,30 @@ unsigned int get_cpei_target_cpu(void) } static int __init -acpi_parse_int_src_ovr ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_int_src_ovr(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_int_src_ovr *p; - p = (struct acpi_table_int_src_ovr *) header; + p = (struct acpi_table_int_src_ovr *)header; if (BAD_MADT_ENTRY(p, end)) return -EINVAL; iosapic_override_isa_irq(p->bus_irq, p->global_irq, - (p->flags.polarity == 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, - (p->flags.trigger == 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); + (p->flags.polarity == + 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, + (p->flags.trigger == + 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); return 0; } - static int __init -acpi_parse_nmi_src (acpi_table_entry_header *header, const unsigned long end) +acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_nmi_src *nmi_src; - nmi_src = (struct acpi_table_nmi_src*) header; + nmi_src = (struct acpi_table_nmi_src *)header; if (BAD_MADT_ENTRY(nmi_src, end)) return -EINVAL; @@ -353,11 +354,9 @@ acpi_parse_nmi_src (acpi_table_entry_header *header, const unsigned long end) return 0; } -static void __init -acpi_madt_oem_check (char *oem_id, char *oem_table_id) +static void __init acpi_madt_oem_check(char *oem_id, char *oem_table_id) { - if (!strncmp(oem_id, "IBM", 3) && - (!strncmp(oem_table_id, "SERMOW", 6))) { + if (!strncmp(oem_id, "IBM", 3) && (!strncmp(oem_table_id, "SERMOW", 6))) { /* * Unfortunately ITC_DRIFT is not yet part of the @@ -370,19 +369,18 @@ acpi_madt_oem_check (char *oem_id, char *oem_table_id) } } -static int __init -acpi_parse_madt (unsigned long phys_addr, unsigned long size) +static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size) { if (!phys_addr || !size) return -EINVAL; - acpi_madt = (struct acpi_table_madt *) __va(phys_addr); + acpi_madt = (struct acpi_table_madt *)__va(phys_addr); acpi_madt_rev = acpi_madt->header.revision; /* remember the value for reference after free_initmem() */ #ifdef CONFIG_ITANIUM - has_8259 = 1; /* Firmware on old Itanium systems is broken */ + has_8259 = 1; /* Firmware on old Itanium systems is broken */ #else has_8259 = acpi_madt->flags.pcat_compat; #endif @@ -396,19 +394,18 @@ acpi_parse_madt (unsigned long phys_addr, unsigned long size) printk(KERN_INFO PREFIX "Local APIC address %p\n", ipi_base_addr); acpi_madt_oem_check(acpi_madt->header.oem_id, - acpi_madt->header.oem_table_id); + acpi_madt->header.oem_table_id); return 0; } - #ifdef CONFIG_ACPI_NUMA #undef SLIT_DEBUG #define PXM_FLAG_LEN ((MAX_PXM_DOMAINS + 1)/32) -static int __initdata srat_num_cpus; /* number of cpus */ +static int __initdata srat_num_cpus; /* number of cpus */ static u32 __devinitdata pxm_flag[PXM_FLAG_LEN]; #define pxm_bit_set(bit) (set_bit(bit,(void *)pxm_flag)) #define pxm_bit_test(bit) (test_bit(bit,(void *)pxm_flag)) @@ -421,15 +418,15 @@ static struct acpi_table_slit __initdata *slit_table; * ACPI 2.0 SLIT (System Locality Information Table) * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf */ -void __init -acpi_numa_slit_init (struct acpi_table_slit *slit) +void __init acpi_numa_slit_init(struct acpi_table_slit *slit) { u32 len; len = sizeof(struct acpi_table_header) + 8 - + slit->localities * slit->localities; + + slit->localities * slit->localities; if (slit->header.length != len) { - printk(KERN_ERR "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n", + printk(KERN_ERR + "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n", len, slit->header.length); memset(numa_slit, 10, sizeof(numa_slit)); return; @@ -438,19 +435,20 @@ acpi_numa_slit_init (struct acpi_table_slit *slit) } void __init -acpi_numa_processor_affinity_init (struct acpi_table_processor_affinity *pa) +acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa) { /* record this node in proximity bitmap */ pxm_bit_set(pa->proximity_domain); - node_cpuid[srat_num_cpus].phys_id = (pa->apic_id << 8) | (pa->lsapic_eid); + node_cpuid[srat_num_cpus].phys_id = + (pa->apic_id << 8) | (pa->lsapic_eid); /* nid should be overridden as logical node id later */ node_cpuid[srat_num_cpus].nid = pa->proximity_domain; srat_num_cpus++; } void __init -acpi_numa_memory_affinity_init (struct acpi_table_memory_affinity *ma) +acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) { unsigned long paddr, size; u8 pxm; @@ -487,8 +485,7 @@ acpi_numa_memory_affinity_init (struct acpi_table_memory_affinity *ma) num_node_memblks++; } -void __init -acpi_numa_arch_fixup (void) +void __init acpi_numa_arch_fixup(void) { int i, j, node_from, node_to; @@ -534,21 +531,24 @@ acpi_numa_arch_fixup (void) for (i = 0; i < srat_num_cpus; i++) node_cpuid[i].nid = pxm_to_nid_map[node_cpuid[i].nid]; - printk(KERN_INFO "Number of logical nodes in system = %d\n", num_online_nodes()); - printk(KERN_INFO "Number of memory chunks in system = %d\n", num_node_memblks); + printk(KERN_INFO "Number of logical nodes in system = %d\n", + num_online_nodes()); + printk(KERN_INFO "Number of memory chunks in system = %d\n", + num_node_memblks); - if (!slit_table) return; + if (!slit_table) + return; memset(numa_slit, -1, sizeof(numa_slit)); - for (i=0; i<slit_table->localities; i++) { + for (i = 0; i < slit_table->localities; i++) { if (!pxm_bit_test(i)) continue; node_from = pxm_to_nid_map[i]; - for (j=0; j<slit_table->localities; j++) { + for (j = 0; j < slit_table->localities; j++) { if (!pxm_bit_test(j)) continue; node_to = pxm_to_nid_map[j]; node_distance(node_from, node_to) = - slit_table->entry[i*slit_table->localities + j]; + slit_table->entry[i * slit_table->localities + j]; } } @@ -556,36 +556,41 @@ acpi_numa_arch_fixup (void) printk("ACPI 2.0 SLIT locality table:\n"); for_each_online_node(i) { for_each_online_node(j) - printk("%03d ", node_distance(i,j)); + printk("%03d ", node_distance(i, j)); printk("\n"); } #endif } -#endif /* CONFIG_ACPI_NUMA */ +#endif /* CONFIG_ACPI_NUMA */ -unsigned int -acpi_register_gsi (u32 gsi, int edge_level, int active_high_low) +/* + * success: return IRQ number (>=0) + * failure: return < 0 + */ +int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) { if (has_8259 && gsi < 16) return isa_irq_to_vector(gsi); return iosapic_register_intr(gsi, - (active_high_low == ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, - (edge_level == ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); + (active_high_low == + ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH : + IOSAPIC_POL_LOW, + (edge_level == + ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE : + IOSAPIC_LEVEL); } + EXPORT_SYMBOL(acpi_register_gsi); -#ifdef CONFIG_ACPI_DEALLOCATE_IRQ -void -acpi_unregister_gsi (u32 gsi) +void acpi_unregister_gsi(u32 gsi) { iosapic_unregister_intr(gsi); } + EXPORT_SYMBOL(acpi_unregister_gsi); -#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */ -static int __init -acpi_parse_fadt (unsigned long phys_addr, unsigned long size) +static int __init acpi_parse_fadt(unsigned long phys_addr, unsigned long size) { struct acpi_table_header *fadt_header; struct fadt_descriptor_rev2 *fadt; @@ -593,11 +598,11 @@ acpi_parse_fadt (unsigned long phys_addr, unsigned long size) if (!phys_addr || !size) return -EINVAL; - fadt_header = (struct acpi_table_header *) __va(phys_addr); + fadt_header = (struct acpi_table_header *)__va(phys_addr); if (fadt_header->revision != 3) - return -ENODEV; /* Only deal with ACPI 2.0 FADT */ + return -ENODEV; /* Only deal with ACPI 2.0 FADT */ - fadt = (struct fadt_descriptor_rev2 *) fadt_header; + fadt = (struct fadt_descriptor_rev2 *)fadt_header; if (!(fadt->iapc_boot_arch & BAF_8042_KEYBOARD_CONTROLLER)) acpi_kbd_controller_present = 0; @@ -609,22 +614,19 @@ acpi_parse_fadt (unsigned long phys_addr, unsigned long size) return 0; } - -unsigned long __init -acpi_find_rsdp (void) +unsigned long __init acpi_find_rsdp(void) { unsigned long rsdp_phys = 0; if (efi.acpi20) rsdp_phys = __pa(efi.acpi20); else if (efi.acpi) - printk(KERN_WARNING PREFIX "v1.0/r0.71 tables no longer supported\n"); + printk(KERN_WARNING PREFIX + "v1.0/r0.71 tables no longer supported\n"); return rsdp_phys; } - -int __init -acpi_boot_init (void) +int __init acpi_boot_init(void) { /* @@ -642,31 +644,43 @@ acpi_boot_init (void) /* Local APIC */ - if (acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0) < 0) - printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n"); + if (acpi_table_parse_madt + (ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0) < 0) + printk(KERN_ERR PREFIX + "Error parsing LAPIC address override entry\n"); - if (acpi_table_parse_madt(ACPI_MADT_LSAPIC, acpi_parse_lsapic, NR_CPUS) < 1) - printk(KERN_ERR PREFIX "Error parsing MADT - no LAPIC entries\n"); + if (acpi_table_parse_madt(ACPI_MADT_LSAPIC, acpi_parse_lsapic, NR_CPUS) + < 1) + printk(KERN_ERR PREFIX + "Error parsing MADT - no LAPIC entries\n"); - if (acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0) < 0) + if (acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0) + < 0) printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); /* I/O APIC */ - if (acpi_table_parse_madt(ACPI_MADT_IOSAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) - printk(KERN_ERR PREFIX "Error parsing MADT - no IOSAPIC entries\n"); + if (acpi_table_parse_madt + (ACPI_MADT_IOSAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) + printk(KERN_ERR PREFIX + "Error parsing MADT - no IOSAPIC entries\n"); /* System-Level Interrupt Routing */ - if (acpi_table_parse_madt(ACPI_MADT_PLAT_INT_SRC, acpi_parse_plat_int_src, ACPI_MAX_PLATFORM_INTERRUPTS) < 0) - printk(KERN_ERR PREFIX "Error parsing platform interrupt source entry\n"); + if (acpi_table_parse_madt + (ACPI_MADT_PLAT_INT_SRC, acpi_parse_plat_int_src, + ACPI_MAX_PLATFORM_INTERRUPTS) < 0) + printk(KERN_ERR PREFIX + "Error parsing platform interrupt source entry\n"); - if (acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, 0) < 0) - printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n"); + if (acpi_table_parse_madt + (ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, 0) < 0) + printk(KERN_ERR PREFIX + "Error parsing interrupt source overrides entry\n"); if (acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, 0) < 0) printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); - skip_madt: + skip_madt: /* * FADT says whether a legacy keyboard controller is present. @@ -681,8 +695,9 @@ acpi_boot_init (void) if (available_cpus == 0) { printk(KERN_INFO "ACPI: Found 0 CPUS; assuming 1\n"); printk(KERN_INFO "CPU 0 (0x%04x)", hard_smp_processor_id()); - smp_boot_data.cpu_phys_id[available_cpus] = hard_smp_processor_id(); - available_cpus = 1; /* We've got at least one of these, no? */ + smp_boot_data.cpu_phys_id[available_cpus] = + hard_smp_processor_id(); + available_cpus = 1; /* We've got at least one of these, no? */ } smp_boot_data.cpu_count = available_cpus; @@ -691,8 +706,10 @@ acpi_boot_init (void) if (srat_num_cpus == 0) { int cpu, i = 1; for (cpu = 0; cpu < smp_boot_data.cpu_count; cpu++) - if (smp_boot_data.cpu_phys_id[cpu] != hard_smp_processor_id()) - node_cpuid[i++].phys_id = smp_boot_data.cpu_phys_id[cpu]; + if (smp_boot_data.cpu_phys_id[cpu] != + hard_smp_processor_id()) + node_cpuid[i++].phys_id = + smp_boot_data.cpu_phys_id[cpu]; } # endif #endif @@ -700,12 +717,12 @@ acpi_boot_init (void) build_cpu_to_node_map(); #endif /* Make boot-up look pretty */ - printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus, total_cpus); + printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus, + total_cpus); return 0; } -int -acpi_gsi_to_irq (u32 gsi, unsigned int *irq) +int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) { int vector; @@ -726,11 +743,10 @@ acpi_gsi_to_irq (u32 gsi, unsigned int *irq) */ #ifdef CONFIG_ACPI_HOTPLUG_CPU static -int -acpi_map_cpu2node(acpi_handle handle, int cpu, long physid) +int acpi_map_cpu2node(acpi_handle handle, int cpu, long physid) { #ifdef CONFIG_ACPI_NUMA - int pxm_id; + int pxm_id; pxm_id = acpi_get_pxm(handle); @@ -738,31 +754,28 @@ acpi_map_cpu2node(acpi_handle handle, int cpu, long physid) * Assuming that the container driver would have set the proximity * domain and would have initialized pxm_to_nid_map[pxm_id] && pxm_flag */ - node_cpuid[cpu].nid = (pxm_id < 0) ? 0: - pxm_to_nid_map[pxm_id]; + node_cpuid[cpu].nid = (pxm_id < 0) ? 0 : pxm_to_nid_map[pxm_id]; - node_cpuid[cpu].phys_id = physid; + node_cpuid[cpu].phys_id = physid; #endif - return(0); + return (0); } - -int -acpi_map_lsapic(acpi_handle handle, int *pcpu) +int acpi_map_lsapic(acpi_handle handle, int *pcpu) { - struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; struct acpi_table_lsapic *lsapic; cpumask_t tmp_map; long physid; int cpu; - + if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) return -EINVAL; - if (!buffer.length || !buffer.pointer) + if (!buffer.length || !buffer.pointer) return -EINVAL; - + obj = buffer.pointer; if (obj->type != ACPI_TYPE_BUFFER || obj->buffer.length < sizeof(*lsapic)) { @@ -778,7 +791,7 @@ acpi_map_lsapic(acpi_handle handle, int *pcpu) return -EINVAL; } - physid = ((lsapic->id <<8) | (lsapic->eid)); + physid = ((lsapic->id << 8) | (lsapic->eid)); acpi_os_free(buffer.pointer); buffer.length = ACPI_ALLOCATE_BUFFER; @@ -786,50 +799,49 @@ acpi_map_lsapic(acpi_handle handle, int *pcpu) cpus_complement(tmp_map, cpu_present_map); cpu = first_cpu(tmp_map); - if(cpu >= NR_CPUS) + if (cpu >= NR_CPUS) return -EINVAL; acpi_map_cpu2node(handle, cpu, physid); - cpu_set(cpu, cpu_present_map); + cpu_set(cpu, cpu_present_map); ia64_cpu_to_sapicid[cpu] = physid; ia64_acpiid_to_sapicid[lsapic->acpi_id] = ia64_cpu_to_sapicid[cpu]; *pcpu = cpu; - return(0); + return (0); } -EXPORT_SYMBOL(acpi_map_lsapic); +EXPORT_SYMBOL(acpi_map_lsapic); -int -acpi_unmap_lsapic(int cpu) +int acpi_unmap_lsapic(int cpu) { int i; - for (i=0; i<MAX_SAPICS; i++) { - if (ia64_acpiid_to_sapicid[i] == ia64_cpu_to_sapicid[cpu]) { - ia64_acpiid_to_sapicid[i] = -1; - break; - } - } + for (i = 0; i < MAX_SAPICS; i++) { + if (ia64_acpiid_to_sapicid[i] == ia64_cpu_to_sapicid[cpu]) { + ia64_acpiid_to_sapicid[i] = -1; + break; + } + } ia64_cpu_to_sapicid[cpu] = -1; - cpu_clear(cpu,cpu_present_map); + cpu_clear(cpu, cpu_present_map); #ifdef CONFIG_ACPI_NUMA /* NUMA specific cleanup's */ #endif - return(0); + return (0); } + EXPORT_SYMBOL(acpi_unmap_lsapic); -#endif /* CONFIG_ACPI_HOTPLUG_CPU */ - +#endif /* CONFIG_ACPI_HOTPLUG_CPU */ #ifdef CONFIG_ACPI_NUMA acpi_status __devinit -acpi_map_iosapic (acpi_handle handle, u32 depth, void *context, void **ret) +acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret) { - struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; struct acpi_table_iosapic *iosapic; unsigned int gsi_base; @@ -878,10 +890,9 @@ acpi_map_iosapic (acpi_handle handle, u32 depth, void *context, void **ret) map_iosapic_to_node(gsi_base, node); return AE_OK; } -#endif /* CONFIG_NUMA */ +#endif /* CONFIG_NUMA */ -int -acpi_register_ioapic (acpi_handle handle, u64 phys_addr, u32 gsi_base) +int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) { int err; @@ -890,17 +901,18 @@ acpi_register_ioapic (acpi_handle handle, u64 phys_addr, u32 gsi_base) #if CONFIG_ACPI_NUMA acpi_map_iosapic(handle, 0, NULL, NULL); -#endif /* CONFIG_ACPI_NUMA */ +#endif /* CONFIG_ACPI_NUMA */ return 0; } + EXPORT_SYMBOL(acpi_register_ioapic); -int -acpi_unregister_ioapic (acpi_handle handle, u32 gsi_base) +int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) { return iosapic_remove(gsi_base); } + EXPORT_SYMBOL(acpi_unregister_ioapic); -#endif /* CONFIG_ACPI_BOOT */ +#endif /* CONFIG_ACPI */ diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c index 7d1ae2982c53..f6a234289341 100644 --- a/arch/ia64/kernel/asm-offsets.c +++ b/arch/ia64/kernel/asm-offsets.c @@ -211,17 +211,41 @@ void foo(void) #endif BLANK(); - DEFINE(IA64_MCA_CPU_PROC_STATE_DUMP_OFFSET, - offsetof (struct ia64_mca_cpu, proc_state_dump)); - DEFINE(IA64_MCA_CPU_STACK_OFFSET, - offsetof (struct ia64_mca_cpu, stack)); - DEFINE(IA64_MCA_CPU_STACKFRAME_OFFSET, - offsetof (struct ia64_mca_cpu, stackframe)); - DEFINE(IA64_MCA_CPU_RBSTORE_OFFSET, - offsetof (struct ia64_mca_cpu, rbstore)); + DEFINE(IA64_MCA_CPU_MCA_STACK_OFFSET, + offsetof (struct ia64_mca_cpu, mca_stack)); DEFINE(IA64_MCA_CPU_INIT_STACK_OFFSET, offsetof (struct ia64_mca_cpu, init_stack)); BLANK(); + DEFINE(IA64_SAL_OS_STATE_COMMON_OFFSET, + offsetof (struct ia64_sal_os_state, sal_ra)); + DEFINE(IA64_SAL_OS_STATE_OS_GP_OFFSET, + offsetof (struct ia64_sal_os_state, os_gp)); + DEFINE(IA64_SAL_OS_STATE_PAL_MIN_STATE_OFFSET, + offsetof (struct ia64_sal_os_state, pal_min_state)); + DEFINE(IA64_SAL_OS_STATE_PROC_STATE_PARAM_OFFSET, + offsetof (struct ia64_sal_os_state, proc_state_param)); + DEFINE(IA64_SAL_OS_STATE_SIZE, + sizeof (struct ia64_sal_os_state)); + DEFINE(IA64_PMSA_GR_OFFSET, + offsetof (struct pal_min_state_area_s, pmsa_gr)); + DEFINE(IA64_PMSA_BANK1_GR_OFFSET, + offsetof (struct pal_min_state_area_s, pmsa_bank1_gr)); + DEFINE(IA64_PMSA_PR_OFFSET, + offsetof (struct pal_min_state_area_s, pmsa_pr)); + DEFINE(IA64_PMSA_BR0_OFFSET, + offsetof (struct pal_min_state_area_s, pmsa_br0)); + DEFINE(IA64_PMSA_RSC_OFFSET, + offsetof (struct pal_min_state_area_s, pmsa_rsc)); + DEFINE(IA64_PMSA_IIP_OFFSET, + offsetof (struct pal_min_state_area_s, pmsa_iip)); + DEFINE(IA64_PMSA_IPSR_OFFSET, + offsetof (struct pal_min_state_area_s, pmsa_ipsr)); + DEFINE(IA64_PMSA_IFS_OFFSET, + offsetof (struct pal_min_state_area_s, pmsa_ifs)); + DEFINE(IA64_PMSA_XIP_OFFSET, + offsetof (struct pal_min_state_area_s, pmsa_xip)); + BLANK(); + /* used by fsys_gettimeofday in arch/ia64/kernel/fsys.S */ DEFINE(IA64_TIME_INTERPOLATOR_ADDRESS_OFFSET, offsetof (struct time_interpolator, addr)); DEFINE(IA64_TIME_INTERPOLATOR_SOURCE_OFFSET, offsetof (struct time_interpolator, source)); diff --git a/arch/ia64/kernel/cpufreq/Kconfig b/arch/ia64/kernel/cpufreq/Kconfig new file mode 100644 index 000000000000..2d9d5279b981 --- /dev/null +++ b/arch/ia64/kernel/cpufreq/Kconfig @@ -0,0 +1,29 @@ + +# +# CPU Frequency scaling +# + +menu "CPU Frequency scaling" + +source "drivers/cpufreq/Kconfig" + +if CPU_FREQ + +comment "CPUFreq processor drivers" + +config IA64_ACPI_CPUFREQ + tristate "ACPI Processor P-States driver" + select CPU_FREQ_TABLE + depends on ACPI_PROCESSOR + help + This driver adds a CPUFreq driver which utilizes the ACPI + Processor Performance States. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +endif # CPU_FREQ + +endmenu + diff --git a/arch/ia64/kernel/cpufreq/Makefile b/arch/ia64/kernel/cpufreq/Makefile new file mode 100644 index 000000000000..f748d34c02f0 --- /dev/null +++ b/arch/ia64/kernel/cpufreq/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_IA64_ACPI_CPUFREQ) += acpi-cpufreq.o diff --git a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c new file mode 100644 index 000000000000..da4d5cf80a48 --- /dev/null +++ b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c @@ -0,0 +1,499 @@ +/* + * arch/ia64/kernel/cpufreq/acpi-cpufreq.c + * This file provides the ACPI based P-state support. This + * module works with generic cpufreq infrastructure. Most of + * the code is based on i386 version + * (arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c) + * + * Copyright (C) 2005 Intel Corp + * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/pal.h> + +#include <linux/acpi.h> +#include <acpi/processor.h> + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg) + +MODULE_AUTHOR("Venkatesh Pallipadi"); +MODULE_DESCRIPTION("ACPI Processor P-States Driver"); +MODULE_LICENSE("GPL"); + + +struct cpufreq_acpi_io { + struct acpi_processor_performance acpi_data; + struct cpufreq_frequency_table *freq_table; + unsigned int resume; +}; + +static struct cpufreq_acpi_io *acpi_io_data[NR_CPUS]; + +static struct cpufreq_driver acpi_cpufreq_driver; + + +static int +processor_set_pstate ( + u32 value) +{ + s64 retval; + + dprintk("processor_set_pstate\n"); + + retval = ia64_pal_set_pstate((u64)value); + + if (retval) { + dprintk("Failed to set freq to 0x%x, with error 0x%x\n", + value, retval); + return -ENODEV; + } + return (int)retval; +} + + +static int +processor_get_pstate ( + u32 *value) +{ + u64 pstate_index = 0; + s64 retval; + + dprintk("processor_get_pstate\n"); + + retval = ia64_pal_get_pstate(&pstate_index); + *value = (u32) pstate_index; + + if (retval) + dprintk("Failed to get current freq with " + "error 0x%x, idx 0x%x\n", retval, *value); + + return (int)retval; +} + + +/* To be used only after data->acpi_data is initialized */ +static unsigned +extract_clock ( + struct cpufreq_acpi_io *data, + unsigned value, + unsigned int cpu) +{ + unsigned long i; + + dprintk("extract_clock\n"); + + for (i = 0; i < data->acpi_data.state_count; i++) { + if (value >= data->acpi_data.states[i].control) + return data->acpi_data.states[i].core_frequency; + } + return data->acpi_data.states[i-1].core_frequency; +} + + +static unsigned int +processor_get_freq ( + struct cpufreq_acpi_io *data, + unsigned int cpu) +{ + int ret = 0; + u32 value = 0; + cpumask_t saved_mask; + unsigned long clock_freq; + + dprintk("processor_get_freq\n"); + + saved_mask = current->cpus_allowed; + set_cpus_allowed(current, cpumask_of_cpu(cpu)); + if (smp_processor_id() != cpu) { + ret = -EAGAIN; + goto migrate_end; + } + + /* + * processor_get_pstate gets the average frequency since the + * last get. So, do two PAL_get_freq()... + */ + ret = processor_get_pstate(&value); + ret = processor_get_pstate(&value); + + if (ret) { + set_cpus_allowed(current, saved_mask); + printk(KERN_WARNING "get performance failed with error %d\n", + ret); + ret = -EAGAIN; + goto migrate_end; + } + clock_freq = extract_clock(data, value, cpu); + ret = (clock_freq*1000); + +migrate_end: + set_cpus_allowed(current, saved_mask); + return ret; +} + + +static int +processor_set_freq ( + struct cpufreq_acpi_io *data, + unsigned int cpu, + int state) +{ + int ret = 0; + u32 value = 0; + struct cpufreq_freqs cpufreq_freqs; + cpumask_t saved_mask; + int retval; + + dprintk("processor_set_freq\n"); + + saved_mask = current->cpus_allowed; + set_cpus_allowed(current, cpumask_of_cpu(cpu)); + if (smp_processor_id() != cpu) { + retval = -EAGAIN; + goto migrate_end; + } + + if (state == data->acpi_data.state) { + if (unlikely(data->resume)) { + dprintk("Called after resume, resetting to P%d\n", state); + data->resume = 0; + } else { + dprintk("Already at target state (P%d)\n", state); + retval = 0; + goto migrate_end; + } + } + + dprintk("Transitioning from P%d to P%d\n", + data->acpi_data.state, state); + + /* cpufreq frequency struct */ + cpufreq_freqs.cpu = cpu; + cpufreq_freqs.old = data->freq_table[data->acpi_data.state].frequency; + cpufreq_freqs.new = data->freq_table[state].frequency; + + /* notify cpufreq */ + cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE); + + /* + * First we write the target state's 'control' value to the + * control_register. + */ + + value = (u32) data->acpi_data.states[state].control; + + dprintk("Transitioning to state: 0x%08x\n", value); + + ret = processor_set_pstate(value); + if (ret) { + unsigned int tmp = cpufreq_freqs.new; + cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE); + cpufreq_freqs.new = cpufreq_freqs.old; + cpufreq_freqs.old = tmp; + cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE); + cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE); + printk(KERN_WARNING "Transition failed with error %d\n", ret); + retval = -ENODEV; + goto migrate_end; + } + + cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE); + + data->acpi_data.state = state; + + retval = 0; + +migrate_end: + set_cpus_allowed(current, saved_mask); + return (retval); +} + + +static unsigned int +acpi_cpufreq_get ( + unsigned int cpu) +{ + struct cpufreq_acpi_io *data = acpi_io_data[cpu]; + + dprintk("acpi_cpufreq_get\n"); + + return processor_get_freq(data, cpu); +} + + +static int +acpi_cpufreq_target ( + struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu]; + unsigned int next_state = 0; + unsigned int result = 0; + + dprintk("acpi_cpufreq_setpolicy\n"); + + result = cpufreq_frequency_table_target(policy, + data->freq_table, target_freq, relation, &next_state); + if (result) + return (result); + + result = processor_set_freq(data, policy->cpu, next_state); + + return (result); +} + + +static int +acpi_cpufreq_verify ( + struct cpufreq_policy *policy) +{ + unsigned int result = 0; + struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu]; + + dprintk("acpi_cpufreq_verify\n"); + + result = cpufreq_frequency_table_verify(policy, + data->freq_table); + + return (result); +} + + +/* + * processor_init_pdc - let BIOS know about the SMP capabilities + * of this driver + * @perf: processor-specific acpi_io_data struct + * @cpu: CPU being initialized + * + * To avoid issues with legacy OSes, some BIOSes require to be informed of + * the SMP capabilities of OS P-state driver. Here we set the bits in _PDC + * accordingly. Actual call to _PDC is done in driver/acpi/processor.c + */ +static void +processor_init_pdc ( + struct acpi_processor_performance *perf, + unsigned int cpu, + struct acpi_object_list *obj_list + ) +{ + union acpi_object *obj; + u32 *buf; + + dprintk("processor_init_pdc\n"); + + perf->pdc = NULL; + /* Initialize pdc. It will be used later. */ + if (!obj_list) + return; + + if (!(obj_list->count && obj_list->pointer)) + return; + + obj = obj_list->pointer; + if ((obj->buffer.length == 12) && obj->buffer.pointer) { + buf = (u32 *)obj->buffer.pointer; + buf[0] = ACPI_PDC_REVISION_ID; + buf[1] = 1; + buf[2] = ACPI_PDC_EST_CAPABILITY_SMP; + perf->pdc = obj_list; + } + return; +} + + +static int +acpi_cpufreq_cpu_init ( + struct cpufreq_policy *policy) +{ + unsigned int i; + unsigned int cpu = policy->cpu; + struct cpufreq_acpi_io *data; + unsigned int result = 0; + + union acpi_object arg0 = {ACPI_TYPE_BUFFER}; + u32 arg0_buf[3]; + struct acpi_object_list arg_list = {1, &arg0}; + + dprintk("acpi_cpufreq_cpu_init\n"); + /* setup arg_list for _PDC settings */ + arg0.buffer.length = 12; + arg0.buffer.pointer = (u8 *) arg0_buf; + + data = kmalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL); + if (!data) + return (-ENOMEM); + + memset(data, 0, sizeof(struct cpufreq_acpi_io)); + + acpi_io_data[cpu] = data; + + processor_init_pdc(&data->acpi_data, cpu, &arg_list); + result = acpi_processor_register_performance(&data->acpi_data, cpu); + data->acpi_data.pdc = NULL; + + if (result) + goto err_free; + + /* capability check */ + if (data->acpi_data.state_count <= 1) { + dprintk("No P-States\n"); + result = -ENODEV; + goto err_unreg; + } + + if ((data->acpi_data.control_register.space_id != + ACPI_ADR_SPACE_FIXED_HARDWARE) || + (data->acpi_data.status_register.space_id != + ACPI_ADR_SPACE_FIXED_HARDWARE)) { + dprintk("Unsupported address space [%d, %d]\n", + (u32) (data->acpi_data.control_register.space_id), + (u32) (data->acpi_data.status_register.space_id)); + result = -ENODEV; + goto err_unreg; + } + + /* alloc freq_table */ + data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) * + (data->acpi_data.state_count + 1), + GFP_KERNEL); + if (!data->freq_table) { + result = -ENOMEM; + goto err_unreg; + } + + /* detect transition latency */ + policy->cpuinfo.transition_latency = 0; + for (i=0; i<data->acpi_data.state_count; i++) { + if ((data->acpi_data.states[i].transition_latency * 1000) > + policy->cpuinfo.transition_latency) { + policy->cpuinfo.transition_latency = + data->acpi_data.states[i].transition_latency * 1000; + } + } + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + + policy->cur = processor_get_freq(data, policy->cpu); + + /* table init */ + for (i = 0; i <= data->acpi_data.state_count; i++) + { + data->freq_table[i].index = i; + if (i < data->acpi_data.state_count) { + data->freq_table[i].frequency = + data->acpi_data.states[i].core_frequency * 1000; + } else { + data->freq_table[i].frequency = CPUFREQ_TABLE_END; + } + } + + result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table); + if (result) { + goto err_freqfree; + } + + /* notify BIOS that we exist */ + acpi_processor_notify_smm(THIS_MODULE); + + printk(KERN_INFO "acpi-cpufreq: CPU%u - ACPI performance management " + "activated.\n", cpu); + + for (i = 0; i < data->acpi_data.state_count; i++) + dprintk(" %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n", + (i == data->acpi_data.state?'*':' '), i, + (u32) data->acpi_data.states[i].core_frequency, + (u32) data->acpi_data.states[i].power, + (u32) data->acpi_data.states[i].transition_latency, + (u32) data->acpi_data.states[i].bus_master_latency, + (u32) data->acpi_data.states[i].status, + (u32) data->acpi_data.states[i].control); + + cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu); + + /* the first call to ->target() should result in us actually + * writing something to the appropriate registers. */ + data->resume = 1; + + return (result); + + err_freqfree: + kfree(data->freq_table); + err_unreg: + acpi_processor_unregister_performance(&data->acpi_data, cpu); + err_free: + kfree(data); + acpi_io_data[cpu] = NULL; + + return (result); +} + + +static int +acpi_cpufreq_cpu_exit ( + struct cpufreq_policy *policy) +{ + struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu]; + + dprintk("acpi_cpufreq_cpu_exit\n"); + + if (data) { + cpufreq_frequency_table_put_attr(policy->cpu); + acpi_io_data[policy->cpu] = NULL; + acpi_processor_unregister_performance(&data->acpi_data, + policy->cpu); + kfree(data); + } + + return (0); +} + + +static struct freq_attr* acpi_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + + +static struct cpufreq_driver acpi_cpufreq_driver = { + .verify = acpi_cpufreq_verify, + .target = acpi_cpufreq_target, + .get = acpi_cpufreq_get, + .init = acpi_cpufreq_cpu_init, + .exit = acpi_cpufreq_cpu_exit, + .name = "acpi-cpufreq", + .owner = THIS_MODULE, + .attr = acpi_cpufreq_attr, +}; + + +static int __init +acpi_cpufreq_init (void) +{ + dprintk("acpi_cpufreq_init\n"); + + return cpufreq_register_driver(&acpi_cpufreq_driver); +} + + +static void __exit +acpi_cpufreq_exit (void) +{ + dprintk("acpi_cpufreq_exit\n"); + + cpufreq_unregister_driver(&acpi_cpufreq_driver); + return; +} + + +late_initcall(acpi_cpufreq_init); +module_exit(acpi_cpufreq_exit); + diff --git a/arch/ia64/kernel/domain.c b/arch/ia64/kernel/domain.c deleted file mode 100644 index bbb8efe126b7..000000000000 --- a/arch/ia64/kernel/domain.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * arch/ia64/kernel/domain.c - * Architecture specific sched-domains builder. - * - * Copyright (C) 2004 Jesse Barnes - * Copyright (C) 2004 Silicon Graphics, Inc. - */ - -#include <linux/sched.h> -#include <linux/percpu.h> -#include <linux/slab.h> -#include <linux/cpumask.h> -#include <linux/init.h> -#include <linux/topology.h> -#include <linux/nodemask.h> - -#define SD_NODES_PER_DOMAIN 16 - -#ifdef CONFIG_NUMA -/** - * find_next_best_node - find the next node to include in a sched_domain - * @node: node whose sched_domain we're building - * @used_nodes: nodes already in the sched_domain - * - * Find the next node to include in a given scheduling domain. Simply - * finds the closest node not already in the @used_nodes map. - * - * Should use nodemask_t. - */ -static int find_next_best_node(int node, unsigned long *used_nodes) -{ - int i, n, val, min_val, best_node = 0; - - min_val = INT_MAX; - - for (i = 0; i < MAX_NUMNODES; i++) { - /* Start at @node */ - n = (node + i) % MAX_NUMNODES; - - if (!nr_cpus_node(n)) - continue; - - /* Skip already used nodes */ - if (test_bit(n, used_nodes)) - continue; - - /* Simple min distance search */ - val = node_distance(node, n); - - if (val < min_val) { - min_val = val; - best_node = n; - } - } - - set_bit(best_node, used_nodes); - return best_node; -} - -/** - * sched_domain_node_span - get a cpumask for a node's sched_domain - * @node: node whose cpumask we're constructing - * @size: number of nodes to include in this span - * - * Given a node, construct a good cpumask for its sched_domain to span. It - * should be one that prevents unnecessary balancing, but also spreads tasks - * out optimally. - */ -static cpumask_t sched_domain_node_span(int node) -{ - int i; - cpumask_t span, nodemask; - DECLARE_BITMAP(used_nodes, MAX_NUMNODES); - - cpus_clear(span); - bitmap_zero(used_nodes, MAX_NUMNODES); - - nodemask = node_to_cpumask(node); - cpus_or(span, span, nodemask); - set_bit(node, used_nodes); - - for (i = 1; i < SD_NODES_PER_DOMAIN; i++) { - int next_node = find_next_best_node(node, used_nodes); - nodemask = node_to_cpumask(next_node); - cpus_or(span, span, nodemask); - } - - return span; -} -#endif - -/* - * At the moment, CONFIG_SCHED_SMT is never defined, but leave it in so we - * can switch it on easily if needed. - */ -#ifdef CONFIG_SCHED_SMT -static DEFINE_PER_CPU(struct sched_domain, cpu_domains); -static struct sched_group sched_group_cpus[NR_CPUS]; -static int cpu_to_cpu_group(int cpu) -{ - return cpu; -} -#endif - -static DEFINE_PER_CPU(struct sched_domain, phys_domains); -static struct sched_group sched_group_phys[NR_CPUS]; -static int cpu_to_phys_group(int cpu) -{ -#ifdef CONFIG_SCHED_SMT - return first_cpu(cpu_sibling_map[cpu]); -#else - return cpu; -#endif -} - -#ifdef CONFIG_NUMA -/* - * The init_sched_build_groups can't handle what we want to do with node - * groups, so roll our own. Now each node has its own list of groups which - * gets dynamically allocated. - */ -static DEFINE_PER_CPU(struct sched_domain, node_domains); -static struct sched_group *sched_group_nodes[MAX_NUMNODES]; - -static DEFINE_PER_CPU(struct sched_domain, allnodes_domains); -static struct sched_group sched_group_allnodes[MAX_NUMNODES]; - -static int cpu_to_allnodes_group(int cpu) -{ - return cpu_to_node(cpu); -} -#endif - -/* - * Build sched domains for a given set of cpus and attach the sched domains - * to the individual cpus - */ -void build_sched_domains(const cpumask_t *cpu_map) -{ - int i; - - /* - * Set up domains for cpus specified by the cpu_map. - */ - for_each_cpu_mask(i, *cpu_map) { - int group; - struct sched_domain *sd = NULL, *p; - cpumask_t nodemask = node_to_cpumask(cpu_to_node(i)); - - cpus_and(nodemask, nodemask, *cpu_map); - -#ifdef CONFIG_NUMA - if (num_online_cpus() - > SD_NODES_PER_DOMAIN*cpus_weight(nodemask)) { - sd = &per_cpu(allnodes_domains, i); - *sd = SD_ALLNODES_INIT; - sd->span = *cpu_map; - group = cpu_to_allnodes_group(i); - sd->groups = &sched_group_allnodes[group]; - p = sd; - } else - p = NULL; - - sd = &per_cpu(node_domains, i); - *sd = SD_NODE_INIT; - sd->span = sched_domain_node_span(cpu_to_node(i)); - sd->parent = p; - cpus_and(sd->span, sd->span, *cpu_map); -#endif - - p = sd; - sd = &per_cpu(phys_domains, i); - group = cpu_to_phys_group(i); - *sd = SD_CPU_INIT; - sd->span = nodemask; - sd->parent = p; - sd->groups = &sched_group_phys[group]; - -#ifdef CONFIG_SCHED_SMT - p = sd; - sd = &per_cpu(cpu_domains, i); - group = cpu_to_cpu_group(i); - *sd = SD_SIBLING_INIT; - sd->span = cpu_sibling_map[i]; - cpus_and(sd->span, sd->span, *cpu_map); - sd->parent = p; - sd->groups = &sched_group_cpus[group]; -#endif - } - -#ifdef CONFIG_SCHED_SMT - /* Set up CPU (sibling) groups */ - for_each_cpu_mask(i, *cpu_map) { - cpumask_t this_sibling_map = cpu_sibling_map[i]; - cpus_and(this_sibling_map, this_sibling_map, *cpu_map); - if (i != first_cpu(this_sibling_map)) - continue; - - init_sched_build_groups(sched_group_cpus, this_sibling_map, - &cpu_to_cpu_group); - } -#endif - - /* Set up physical groups */ - for (i = 0; i < MAX_NUMNODES; i++) { - cpumask_t nodemask = node_to_cpumask(i); - - cpus_and(nodemask, nodemask, *cpu_map); - if (cpus_empty(nodemask)) - continue; - - init_sched_build_groups(sched_group_phys, nodemask, - &cpu_to_phys_group); - } - -#ifdef CONFIG_NUMA - init_sched_build_groups(sched_group_allnodes, *cpu_map, - &cpu_to_allnodes_group); - - for (i = 0; i < MAX_NUMNODES; i++) { - /* Set up node groups */ - struct sched_group *sg, *prev; - cpumask_t nodemask = node_to_cpumask(i); - cpumask_t domainspan; - cpumask_t covered = CPU_MASK_NONE; - int j; - - cpus_and(nodemask, nodemask, *cpu_map); - if (cpus_empty(nodemask)) - continue; - - domainspan = sched_domain_node_span(i); - cpus_and(domainspan, domainspan, *cpu_map); - - sg = kmalloc(sizeof(struct sched_group), GFP_KERNEL); - sched_group_nodes[i] = sg; - for_each_cpu_mask(j, nodemask) { - struct sched_domain *sd; - sd = &per_cpu(node_domains, j); - sd->groups = sg; - if (sd->groups == NULL) { - /* Turn off balancing if we have no groups */ - sd->flags = 0; - } - } - if (!sg) { - printk(KERN_WARNING - "Can not alloc domain group for node %d\n", i); - continue; - } - sg->cpu_power = 0; - sg->cpumask = nodemask; - cpus_or(covered, covered, nodemask); - prev = sg; - - for (j = 0; j < MAX_NUMNODES; j++) { - cpumask_t tmp, notcovered; - int n = (i + j) % MAX_NUMNODES; - - cpus_complement(notcovered, covered); - cpus_and(tmp, notcovered, *cpu_map); - cpus_and(tmp, tmp, domainspan); - if (cpus_empty(tmp)) - break; - - nodemask = node_to_cpumask(n); - cpus_and(tmp, tmp, nodemask); - if (cpus_empty(tmp)) - continue; - - sg = kmalloc(sizeof(struct sched_group), GFP_KERNEL); - if (!sg) { - printk(KERN_WARNING - "Can not alloc domain group for node %d\n", j); - break; - } - sg->cpu_power = 0; - sg->cpumask = tmp; - cpus_or(covered, covered, tmp); - prev->next = sg; - prev = sg; - } - prev->next = sched_group_nodes[i]; - } -#endif - - /* Calculate CPU power for physical packages and nodes */ - for_each_cpu_mask(i, *cpu_map) { - int power; - struct sched_domain *sd; -#ifdef CONFIG_SCHED_SMT - sd = &per_cpu(cpu_domains, i); - power = SCHED_LOAD_SCALE; - sd->groups->cpu_power = power; -#endif - - sd = &per_cpu(phys_domains, i); - power = SCHED_LOAD_SCALE + SCHED_LOAD_SCALE * - (cpus_weight(sd->groups->cpumask)-1) / 10; - sd->groups->cpu_power = power; - -#ifdef CONFIG_NUMA - sd = &per_cpu(allnodes_domains, i); - if (sd->groups) { - power = SCHED_LOAD_SCALE + SCHED_LOAD_SCALE * - (cpus_weight(sd->groups->cpumask)-1) / 10; - sd->groups->cpu_power = power; - } -#endif - } - -#ifdef CONFIG_NUMA - for (i = 0; i < MAX_NUMNODES; i++) { - struct sched_group *sg = sched_group_nodes[i]; - int j; - - if (sg == NULL) - continue; -next_sg: - for_each_cpu_mask(j, sg->cpumask) { - struct sched_domain *sd; - int power; - - sd = &per_cpu(phys_domains, j); - if (j != first_cpu(sd->groups->cpumask)) { - /* - * Only add "power" once for each - * physical package. - */ - continue; - } - power = SCHED_LOAD_SCALE + SCHED_LOAD_SCALE * - (cpus_weight(sd->groups->cpumask)-1) / 10; - - sg->cpu_power += power; - } - sg = sg->next; - if (sg != sched_group_nodes[i]) - goto next_sg; - } -#endif - - /* Attach the domains */ - for_each_cpu_mask(i, *cpu_map) { - struct sched_domain *sd; -#ifdef CONFIG_SCHED_SMT - sd = &per_cpu(cpu_domains, i); -#else - sd = &per_cpu(phys_domains, i); -#endif - cpu_attach_domain(sd, i); - } -} -/* - * Set up scheduler domains and groups. Callers must hold the hotplug lock. - */ -void arch_init_sched_domains(const cpumask_t *cpu_map) -{ - cpumask_t cpu_default_map; - - /* - * Setup mask for cpus without special case scheduling requirements. - * For now this just excludes isolated cpus, but could be used to - * exclude other special cases in the future. - */ - cpus_andnot(cpu_default_map, *cpu_map, cpu_isolated_map); - - build_sched_domains(&cpu_default_map); -} - -void arch_destroy_sched_domains(const cpumask_t *cpu_map) -{ -#ifdef CONFIG_NUMA - int i; - for (i = 0; i < MAX_NUMNODES; i++) { - cpumask_t nodemask = node_to_cpumask(i); - struct sched_group *oldsg, *sg = sched_group_nodes[i]; - - cpus_and(nodemask, nodemask, *cpu_map); - if (cpus_empty(nodemask)) - continue; - - if (sg == NULL) - continue; - sg = sg->next; -next_sg: - oldsg = sg; - sg = sg->next; - kfree(oldsg); - if (oldsg != sched_group_nodes[i]) - goto next_sg; - sched_group_nodes[i] = NULL; - } -#endif -} - diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 9be53e1ea404..ba0b6a1f429f 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -37,7 +37,7 @@ #include <asm/cache.h> #include <asm/errno.h> #include <asm/kregs.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/pgtable.h> #include <asm/percpu.h> #include <asm/processor.h> @@ -204,9 +204,6 @@ GLOBAL_ENTRY(ia64_switch_to) (p6) br.cond.dpnt .map ;; .done: -(p6) ssm psr.ic // if we had to map, reenable the psr.ic bit FIRST!!! - ;; -(p6) srlz.d ld8 sp=[r21] // load kernel stack pointer of new task mov IA64_KR(CURRENT)=in0 // update "current" application register mov r8=r13 // return pointer to previously running task @@ -234,6 +231,9 @@ GLOBAL_ENTRY(ia64_switch_to) mov IA64_KR(CURRENT_STACK)=r26 // remember last page we mapped... ;; itr.d dtr[r25]=r23 // wire in new mapping... + ssm psr.ic // reenable the psr.ic bit + ;; + srlz.d br.cond.sptk .done END(ia64_switch_to) @@ -470,6 +470,29 @@ ENTRY(load_switch_stack) br.cond.sptk.many b7 END(load_switch_stack) +GLOBAL_ENTRY(prefetch_stack) + add r14 = -IA64_SWITCH_STACK_SIZE, sp + add r15 = IA64_TASK_THREAD_KSP_OFFSET, in0 + ;; + ld8 r16 = [r15] // load next's stack pointer + lfetch.fault.excl [r14], 128 + ;; + lfetch.fault.excl [r14], 128 + lfetch.fault [r16], 128 + ;; + lfetch.fault.excl [r14], 128 + lfetch.fault [r16], 128 + ;; + lfetch.fault.excl [r14], 128 + lfetch.fault [r16], 128 + ;; + lfetch.fault.excl [r14], 128 + lfetch.fault [r16], 128 + ;; + lfetch.fault [r16], 128 + br.ret.sptk.many rp +END(prefetch_switch_stack) + GLOBAL_ENTRY(execve) mov r15=__NR_execve // put syscall number in place break __BREAK_SYSCALL diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S index 7d7684a369d3..2ddbac6f4999 100644 --- a/arch/ia64/kernel/fsys.S +++ b/arch/ia64/kernel/fsys.S @@ -14,7 +14,7 @@ #include <asm/asmmacro.h> #include <asm/errno.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/percpu.h> #include <asm/thread_info.h> #include <asm/sal.h> diff --git a/arch/ia64/kernel/gate.S b/arch/ia64/kernel/gate.S index 86948ce63e43..86064ca98952 100644 --- a/arch/ia64/kernel/gate.S +++ b/arch/ia64/kernel/gate.S @@ -10,7 +10,7 @@ #include <asm/asmmacro.h> #include <asm/errno.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/sigcontext.h> #include <asm/system.h> #include <asm/unistd.h> diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S index 8d3a9291b47f..bfe65b2e8621 100644 --- a/arch/ia64/kernel/head.S +++ b/arch/ia64/kernel/head.S @@ -25,7 +25,7 @@ #include <asm/fpu.h> #include <asm/kregs.h> #include <asm/mmu_context.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/pal.h> #include <asm/pgtable.h> #include <asm/processor.h> diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 7936b62f7a2e..574084f343fa 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -561,7 +561,7 @@ static inline int vector_is_shared (int vector) return (iosapic_intr_info[vector].count > 1); } -static void +static int register_intr (unsigned int gsi, int vector, unsigned char delivery, unsigned long polarity, unsigned long trigger) { @@ -576,7 +576,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery, index = find_iosapic(gsi); if (index < 0) { printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n", __FUNCTION__, gsi); - return; + return -ENODEV; } iosapic_address = iosapic_lists[index].addr; @@ -587,7 +587,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery, rte = iosapic_alloc_rte(); if (!rte) { printk(KERN_WARNING "%s: cannot allocate memory\n", __FUNCTION__); - return; + return -ENOMEM; } rte_index = gsi - gsi_base; @@ -603,7 +603,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery, struct iosapic_intr_info *info = &iosapic_intr_info[vector]; if (info->trigger != trigger || info->polarity != polarity) { printk (KERN_WARNING "%s: cannot override the interrupt\n", __FUNCTION__); - return; + return -EINVAL; } } @@ -623,6 +623,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery, __FUNCTION__, vector, idesc->handler->typename, irq_type->typename); idesc->handler = irq_type; } + return 0; } static unsigned int @@ -710,7 +711,7 @@ int iosapic_register_intr (unsigned int gsi, unsigned long polarity, unsigned long trigger) { - int vector, mask = 1; + int vector, mask = 1, err; unsigned int dest; unsigned long flags; struct iosapic_rte_info *rte; @@ -737,8 +738,8 @@ again: vector = assign_irq_vector(AUTO_ASSIGN); if (vector < 0) { vector = iosapic_find_sharable_vector(trigger, polarity); - if (vector < 0) - panic("%s: out of interrupt vectors!\n", __FUNCTION__); + if (vector < 0) + return -ENOSPC; } spin_lock_irqsave(&irq_descp(vector)->lock, flags); @@ -753,8 +754,13 @@ again: } dest = get_target_cpu(gsi, vector); - register_intr(gsi, vector, IOSAPIC_LOWEST_PRIORITY, + err = register_intr(gsi, vector, IOSAPIC_LOWEST_PRIORITY, polarity, trigger); + if (err < 0) { + spin_unlock(&iosapic_lock); + spin_unlock_irqrestore(&irq_descp(vector)->lock, flags); + return err; + } /* * If the vector is shared and already unmasked for @@ -776,7 +782,6 @@ again: return vector; } -#ifdef CONFIG_ACPI_DEALLOCATE_IRQ void iosapic_unregister_intr (unsigned int gsi) { @@ -859,7 +864,6 @@ iosapic_unregister_intr (unsigned int gsi) spin_unlock(&iosapic_lock); spin_unlock_irqrestore(&idesc->lock, flags); } -#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */ /* * ACPI calls this when it finds an entry for a platform interrupt. diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index 28f2aadc38d0..205d98028261 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -91,23 +91,8 @@ skip: } #ifdef CONFIG_SMP -/* - * This is updated when the user sets irq affinity via /proc - */ -static cpumask_t __cacheline_aligned pending_irq_cpumask[NR_IRQS]; -static unsigned long pending_irq_redir[BITS_TO_LONGS(NR_IRQS)]; - static char irq_redir [NR_IRQS]; // = { [0 ... NR_IRQS-1] = 1 }; -/* - * Arch specific routine for deferred write to iosapic rte to reprogram - * intr destination. - */ -void proc_set_irq_affinity(unsigned int irq, cpumask_t mask_val) -{ - pending_irq_cpumask[irq] = mask_val; -} - void set_irq_affinity_info (unsigned int irq, int hwid, int redir) { cpumask_t mask = CPU_MASK_NONE; @@ -116,32 +101,10 @@ void set_irq_affinity_info (unsigned int irq, int hwid, int redir) if (irq < NR_IRQS) { irq_affinity[irq] = mask; + set_irq_info(irq, mask); irq_redir[irq] = (char) (redir & 0xff); } } - - -void move_irq(int irq) -{ - /* note - we hold desc->lock */ - cpumask_t tmp; - irq_desc_t *desc = irq_descp(irq); - int redir = test_bit(irq, pending_irq_redir); - - if (unlikely(!desc->handler->set_affinity)) - return; - - if (!cpus_empty(pending_irq_cpumask[irq])) { - cpus_and(tmp, pending_irq_cpumask[irq], cpu_online_map); - if (unlikely(!cpus_empty(tmp))) { - desc->handler->set_affinity(irq | (redir ? IA64_IRQ_REDIRECTED : 0), - pending_irq_cpumask[irq]); - } - cpus_clear(pending_irq_cpumask[irq]); - } -} - - #endif /* CONFIG_SMP */ #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index 3bb3a13c4047..c13ca0d49c4a 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -44,7 +44,7 @@ #include <asm/break.h> #include <asm/ia32.h> #include <asm/kregs.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/pgtable.h> #include <asm/processor.h> #include <asm/ptrace.h> @@ -69,7 +69,6 @@ # define DBG_FAULT(i) #endif -#define MINSTATE_VIRT /* needed by minstate.h */ #include "minstate.h" #define FAULT(n) \ diff --git a/arch/ia64/kernel/jprobes.S b/arch/ia64/kernel/jprobes.S index b7fa3ccd2b0f..2323377e3695 100644 --- a/arch/ia64/kernel/jprobes.S +++ b/arch/ia64/kernel/jprobes.S @@ -49,6 +49,7 @@ /* * void jprobe_break(void) */ + .section .kprobes.text, "ax" ENTRY(jprobe_break) break.m 0x80300 END(jprobe_break) diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 884f5cd27d8a..471086b808a4 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -87,12 +87,25 @@ static enum instruction_type bundle_encoding[32][3] = { * is IP relative instruction and update the kprobe * inst flag accordingly */ -static void update_kprobe_inst_flag(uint template, uint slot, uint major_opcode, - unsigned long kprobe_inst, struct kprobe *p) +static void __kprobes update_kprobe_inst_flag(uint template, uint slot, + uint major_opcode, + unsigned long kprobe_inst, + struct kprobe *p) { p->ainsn.inst_flag = 0; p->ainsn.target_br_reg = 0; + /* Check for Break instruction + * Bits 37:40 Major opcode to be zero + * Bits 27:32 X6 to be zero + * Bits 32:35 X3 to be zero + */ + if ((!major_opcode) && (!((kprobe_inst >> 27) & 0x1FF)) ) { + /* is a break instruction */ + p->ainsn.inst_flag |= INST_FLAG_BREAK_INST; + return; + } + if (bundle_encoding[template][slot] == B) { switch (major_opcode) { case INDIRECT_CALL_OPCODE: @@ -126,8 +139,10 @@ static void update_kprobe_inst_flag(uint template, uint slot, uint major_opcode * Returns 0 if supported * Returns -EINVAL if unsupported */ -static int unsupported_inst(uint template, uint slot, uint major_opcode, - unsigned long kprobe_inst, struct kprobe *p) +static int __kprobes unsupported_inst(uint template, uint slot, + uint major_opcode, + unsigned long kprobe_inst, + struct kprobe *p) { unsigned long addr = (unsigned long)p->addr; @@ -168,8 +183,9 @@ static int unsupported_inst(uint template, uint slot, uint major_opcode, * on which we are inserting kprobe is cmp instruction * with ctype as unc. */ -static uint is_cmp_ctype_unc_inst(uint template, uint slot, uint major_opcode, -unsigned long kprobe_inst) +static uint __kprobes is_cmp_ctype_unc_inst(uint template, uint slot, + uint major_opcode, + unsigned long kprobe_inst) { cmp_inst_t cmp_inst; uint ctype_unc = 0; @@ -201,8 +217,10 @@ out: * In this function we override the bundle with * the break instruction at the given slot. */ -static void prepare_break_inst(uint template, uint slot, uint major_opcode, - unsigned long kprobe_inst, struct kprobe *p) +static void __kprobes prepare_break_inst(uint template, uint slot, + uint major_opcode, + unsigned long kprobe_inst, + struct kprobe *p) { unsigned long break_inst = BREAK_INST; bundle_t *bundle = &p->ainsn.insn.bundle; @@ -271,7 +289,8 @@ static inline int in_ivt_functions(unsigned long addr) && addr < (unsigned long)__end_ivt_text); } -static int valid_kprobe_addr(int template, int slot, unsigned long addr) +static int __kprobes valid_kprobe_addr(int template, int slot, + unsigned long addr) { if ((slot > 2) || ((bundle_encoding[template][1] == L) && slot > 1)) { printk(KERN_WARNING "Attempting to insert unaligned kprobe " @@ -323,7 +342,7 @@ static void kretprobe_trampoline(void) * - cleanup by marking the instance as unused * - long jump back to the original return address */ -int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) { struct kretprobe_instance *ri = NULL; struct hlist_head *head; @@ -381,7 +400,8 @@ int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) return 1; } -void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) +void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, + struct pt_regs *regs) { struct kretprobe_instance *ri; @@ -399,7 +419,7 @@ void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) } } -int arch_prepare_kprobe(struct kprobe *p) +int __kprobes arch_prepare_kprobe(struct kprobe *p) { unsigned long addr = (unsigned long) p->addr; unsigned long *kprobe_addr = (unsigned long *)(addr & ~0xFULL); @@ -430,7 +450,7 @@ int arch_prepare_kprobe(struct kprobe *p) return 0; } -void arch_arm_kprobe(struct kprobe *p) +void __kprobes arch_arm_kprobe(struct kprobe *p) { unsigned long addr = (unsigned long)p->addr; unsigned long arm_addr = addr & ~0xFULL; @@ -439,7 +459,7 @@ void arch_arm_kprobe(struct kprobe *p) flush_icache_range(arm_addr, arm_addr + sizeof(bundle_t)); } -void arch_disarm_kprobe(struct kprobe *p) +void __kprobes arch_disarm_kprobe(struct kprobe *p) { unsigned long addr = (unsigned long)p->addr; unsigned long arm_addr = addr & ~0xFULL; @@ -449,7 +469,7 @@ void arch_disarm_kprobe(struct kprobe *p) flush_icache_range(arm_addr, arm_addr + sizeof(bundle_t)); } -void arch_remove_kprobe(struct kprobe *p) +void __kprobes arch_remove_kprobe(struct kprobe *p) { } @@ -461,7 +481,7 @@ void arch_remove_kprobe(struct kprobe *p) * to original stack address, handle the case where we need to fixup the * relative IP address and/or fixup branch register. */ -static void resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) { unsigned long bundle_addr = ((unsigned long) (&p->opcode.bundle)) & ~0xFULL; unsigned long resume_addr = (unsigned long)p->addr & ~0xFULL; @@ -528,13 +548,16 @@ turn_ss_off: ia64_psr(regs)->ss = 0; } -static void prepare_ss(struct kprobe *p, struct pt_regs *regs) +static void __kprobes prepare_ss(struct kprobe *p, struct pt_regs *regs) { unsigned long bundle_addr = (unsigned long) &p->opcode.bundle; unsigned long slot = (unsigned long)p->addr & 0xf; - /* Update instruction pointer (IIP) and slot number (IPSR.ri) */ - regs->cr_iip = bundle_addr & ~0xFULL; + /* single step inline if break instruction */ + if (p->ainsn.inst_flag == INST_FLAG_BREAK_INST) + regs->cr_iip = (unsigned long)p->addr & ~0xFULL; + else + regs->cr_iip = bundle_addr & ~0xFULL; if (slot > 2) slot = 0; @@ -545,7 +568,39 @@ static void prepare_ss(struct kprobe *p, struct pt_regs *regs) ia64_psr(regs)->ss = 1; } -static int pre_kprobes_handler(struct die_args *args) +static int __kprobes is_ia64_break_inst(struct pt_regs *regs) +{ + unsigned int slot = ia64_psr(regs)->ri; + unsigned int template, major_opcode; + unsigned long kprobe_inst; + unsigned long *kprobe_addr = (unsigned long *)regs->cr_iip; + bundle_t bundle; + + memcpy(&bundle, kprobe_addr, sizeof(bundle_t)); + template = bundle.quad0.template; + + /* Move to slot 2, if bundle is MLX type and kprobe slot is 1 */ + if (slot == 1 && bundle_encoding[template][1] == L) + slot++; + + /* Get Kprobe probe instruction at given slot*/ + get_kprobe_inst(&bundle, slot, &kprobe_inst, &major_opcode); + + /* For break instruction, + * Bits 37:40 Major opcode to be zero + * Bits 27:32 X6 to be zero + * Bits 32:35 X3 to be zero + */ + if (major_opcode || ((kprobe_inst >> 27) & 0x1FF) ) { + /* Not a break instruction */ + return 0; + } + + /* Is a break instruction */ + return 1; +} + +static int __kprobes pre_kprobes_handler(struct die_args *args) { struct kprobe *p; int ret = 0; @@ -558,7 +613,9 @@ static int pre_kprobes_handler(struct die_args *args) if (kprobe_running()) { p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS) { + if ( (kprobe_status == KPROBE_HIT_SS) && + (p->ainsn.inst_flag == INST_FLAG_BREAK_INST)) { + ia64_psr(regs)->ss = 0; unlock_kprobes(); goto no_kprobe; } @@ -592,6 +649,19 @@ static int pre_kprobes_handler(struct die_args *args) p = get_kprobe(addr); if (!p) { unlock_kprobes(); + if (!is_ia64_break_inst(regs)) { + /* + * The breakpoint instruction was removed right + * after we hit it. Another cpu has removed + * either a probepoint or a debugger breakpoint + * at this address. In either case, no further + * handling of this interrupt is appropriate. + */ + ret = 1; + + } + + /* Not one of our break, let kernel handle it */ goto no_kprobe; } @@ -616,7 +686,7 @@ no_kprobe: return ret; } -static int post_kprobes_handler(struct pt_regs *regs) +static int __kprobes post_kprobes_handler(struct pt_regs *regs) { if (!kprobe_running()) return 0; @@ -641,7 +711,7 @@ out: return 1; } -static int kprobes_fault_handler(struct pt_regs *regs, int trapnr) +static int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr) { if (!kprobe_running()) return 0; @@ -659,8 +729,8 @@ static int kprobes_fault_handler(struct pt_regs *regs, int trapnr) return 0; } -int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, - void *data) +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; switch(val) { @@ -681,7 +751,7 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, return NOTIFY_DONE; } -int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr = ((struct fnptr *)(jp->entry))->ip; @@ -703,7 +773,7 @@ int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) return 1; } -int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { *regs = jprobe_saved_regs; return 1; diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 4ebbf3974381..6dc726ad7137 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -48,6 +48,9 @@ * Delete dead variables and functions. * Reorder to remove the need for forward declarations and to consolidate * related code. + * + * 2005-08-12 Keith Owens <kaos@sgi.com> + * Convert MCA/INIT handlers to use per event stacks and SAL/OS state. */ #include <linux/config.h> #include <linux/types.h> @@ -77,6 +80,8 @@ #include <asm/irq.h> #include <asm/hw_irq.h> +#include "entry.h" + #if defined(IA64_MCA_DEBUG_INFO) # define IA64_MCA_DEBUG(fmt...) printk(fmt) #else @@ -84,9 +89,7 @@ #endif /* Used by mca_asm.S */ -ia64_mca_sal_to_os_state_t ia64_sal_to_os_handoff_state; -ia64_mca_os_to_sal_state_t ia64_os_to_sal_handoff_state; -u64 ia64_mca_serialize; +u32 ia64_mca_serialize; DEFINE_PER_CPU(u64, ia64_mca_data); /* == __per_cpu_mca[smp_processor_id()] */ DEFINE_PER_CPU(u64, ia64_mca_per_cpu_pte); /* PTE to map per-CPU area */ DEFINE_PER_CPU(u64, ia64_mca_pal_pte); /* PTE to map PAL code */ @@ -95,8 +98,10 @@ DEFINE_PER_CPU(u64, ia64_mca_pal_base); /* vaddr PAL code granule */ unsigned long __per_cpu_mca[NR_CPUS]; /* In mca_asm.S */ -extern void ia64_monarch_init_handler (void); -extern void ia64_slave_init_handler (void); +extern void ia64_os_init_dispatch_monarch (void); +extern void ia64_os_init_dispatch_slave (void); + +static int monarch_cpu = -1; static ia64_mc_info_t ia64_mc_info; @@ -234,7 +239,8 @@ ia64_log_get(int sal_info_type, u8 **buffer, int irq_safe) * This function retrieves a specified error record type from SAL * and wakes up any processes waiting for error records. * - * Inputs : sal_info_type (Type of error record MCA/CMC/CPE/INIT) + * Inputs : sal_info_type (Type of error record MCA/CMC/CPE) + * FIXME: remove MCA and irq_safe. */ static void ia64_mca_log_sal_error_record(int sal_info_type) @@ -242,7 +248,7 @@ ia64_mca_log_sal_error_record(int sal_info_type) u8 *buffer; sal_log_record_header_t *rh; u64 size; - int irq_safe = sal_info_type != SAL_INFO_TYPE_MCA && sal_info_type != SAL_INFO_TYPE_INIT; + int irq_safe = sal_info_type != SAL_INFO_TYPE_MCA; #ifdef IA64_MCA_DEBUG_INFO static const char * const rec_name[] = { "MCA", "INIT", "CMC", "CPE" }; #endif @@ -330,191 +336,6 @@ ia64_mca_cpe_int_handler (int cpe_irq, void *arg, struct pt_regs *ptregs) #endif /* CONFIG_ACPI */ -static void -show_min_state (pal_min_state_area_t *minstate) -{ - u64 iip = minstate->pmsa_iip + ((struct ia64_psr *)(&minstate->pmsa_ipsr))->ri; - u64 xip = minstate->pmsa_xip + ((struct ia64_psr *)(&minstate->pmsa_xpsr))->ri; - - printk("NaT bits\t%016lx\n", minstate->pmsa_nat_bits); - printk("pr\t\t%016lx\n", minstate->pmsa_pr); - printk("b0\t\t%016lx ", minstate->pmsa_br0); print_symbol("%s\n", minstate->pmsa_br0); - printk("ar.rsc\t\t%016lx\n", minstate->pmsa_rsc); - printk("cr.iip\t\t%016lx ", iip); print_symbol("%s\n", iip); - printk("cr.ipsr\t\t%016lx\n", minstate->pmsa_ipsr); - printk("cr.ifs\t\t%016lx\n", minstate->pmsa_ifs); - printk("xip\t\t%016lx ", xip); print_symbol("%s\n", xip); - printk("xpsr\t\t%016lx\n", minstate->pmsa_xpsr); - printk("xfs\t\t%016lx\n", minstate->pmsa_xfs); - printk("b1\t\t%016lx ", minstate->pmsa_br1); - print_symbol("%s\n", minstate->pmsa_br1); - - printk("\nstatic registers r0-r15:\n"); - printk(" r0- 3 %016lx %016lx %016lx %016lx\n", - 0UL, minstate->pmsa_gr[0], minstate->pmsa_gr[1], minstate->pmsa_gr[2]); - printk(" r4- 7 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_gr[3], minstate->pmsa_gr[4], - minstate->pmsa_gr[5], minstate->pmsa_gr[6]); - printk(" r8-11 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_gr[7], minstate->pmsa_gr[8], - minstate->pmsa_gr[9], minstate->pmsa_gr[10]); - printk("r12-15 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_gr[11], minstate->pmsa_gr[12], - minstate->pmsa_gr[13], minstate->pmsa_gr[14]); - - printk("\nbank 0:\n"); - printk("r16-19 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_bank0_gr[0], minstate->pmsa_bank0_gr[1], - minstate->pmsa_bank0_gr[2], minstate->pmsa_bank0_gr[3]); - printk("r20-23 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_bank0_gr[4], minstate->pmsa_bank0_gr[5], - minstate->pmsa_bank0_gr[6], minstate->pmsa_bank0_gr[7]); - printk("r24-27 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_bank0_gr[8], minstate->pmsa_bank0_gr[9], - minstate->pmsa_bank0_gr[10], minstate->pmsa_bank0_gr[11]); - printk("r28-31 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_bank0_gr[12], minstate->pmsa_bank0_gr[13], - minstate->pmsa_bank0_gr[14], minstate->pmsa_bank0_gr[15]); - - printk("\nbank 1:\n"); - printk("r16-19 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_bank1_gr[0], minstate->pmsa_bank1_gr[1], - minstate->pmsa_bank1_gr[2], minstate->pmsa_bank1_gr[3]); - printk("r20-23 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_bank1_gr[4], minstate->pmsa_bank1_gr[5], - minstate->pmsa_bank1_gr[6], minstate->pmsa_bank1_gr[7]); - printk("r24-27 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_bank1_gr[8], minstate->pmsa_bank1_gr[9], - minstate->pmsa_bank1_gr[10], minstate->pmsa_bank1_gr[11]); - printk("r28-31 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_bank1_gr[12], minstate->pmsa_bank1_gr[13], - minstate->pmsa_bank1_gr[14], minstate->pmsa_bank1_gr[15]); -} - -static void -fetch_min_state (pal_min_state_area_t *ms, struct pt_regs *pt, struct switch_stack *sw) -{ - u64 *dst_banked, *src_banked, bit, shift, nat_bits; - int i; - - /* - * First, update the pt-regs and switch-stack structures with the contents stored - * in the min-state area: - */ - if (((struct ia64_psr *) &ms->pmsa_ipsr)->ic == 0) { - pt->cr_ipsr = ms->pmsa_xpsr; - pt->cr_iip = ms->pmsa_xip; - pt->cr_ifs = ms->pmsa_xfs; - } else { - pt->cr_ipsr = ms->pmsa_ipsr; - pt->cr_iip = ms->pmsa_iip; - pt->cr_ifs = ms->pmsa_ifs; - } - pt->ar_rsc = ms->pmsa_rsc; - pt->pr = ms->pmsa_pr; - pt->r1 = ms->pmsa_gr[0]; - pt->r2 = ms->pmsa_gr[1]; - pt->r3 = ms->pmsa_gr[2]; - sw->r4 = ms->pmsa_gr[3]; - sw->r5 = ms->pmsa_gr[4]; - sw->r6 = ms->pmsa_gr[5]; - sw->r7 = ms->pmsa_gr[6]; - pt->r8 = ms->pmsa_gr[7]; - pt->r9 = ms->pmsa_gr[8]; - pt->r10 = ms->pmsa_gr[9]; - pt->r11 = ms->pmsa_gr[10]; - pt->r12 = ms->pmsa_gr[11]; - pt->r13 = ms->pmsa_gr[12]; - pt->r14 = ms->pmsa_gr[13]; - pt->r15 = ms->pmsa_gr[14]; - dst_banked = &pt->r16; /* r16-r31 are contiguous in struct pt_regs */ - src_banked = ms->pmsa_bank1_gr; - for (i = 0; i < 16; ++i) - dst_banked[i] = src_banked[i]; - pt->b0 = ms->pmsa_br0; - sw->b1 = ms->pmsa_br1; - - /* construct the NaT bits for the pt-regs structure: */ -# define PUT_NAT_BIT(dst, addr) \ - do { \ - bit = nat_bits & 1; nat_bits >>= 1; \ - shift = ((unsigned long) addr >> 3) & 0x3f; \ - dst = ((dst) & ~(1UL << shift)) | (bit << shift); \ - } while (0) - - /* Rotate the saved NaT bits such that bit 0 corresponds to pmsa_gr[0]: */ - shift = ((unsigned long) &ms->pmsa_gr[0] >> 3) & 0x3f; - nat_bits = (ms->pmsa_nat_bits >> shift) | (ms->pmsa_nat_bits << (64 - shift)); - - PUT_NAT_BIT(sw->caller_unat, &pt->r1); - PUT_NAT_BIT(sw->caller_unat, &pt->r2); - PUT_NAT_BIT(sw->caller_unat, &pt->r3); - PUT_NAT_BIT(sw->ar_unat, &sw->r4); - PUT_NAT_BIT(sw->ar_unat, &sw->r5); - PUT_NAT_BIT(sw->ar_unat, &sw->r6); - PUT_NAT_BIT(sw->ar_unat, &sw->r7); - PUT_NAT_BIT(sw->caller_unat, &pt->r8); PUT_NAT_BIT(sw->caller_unat, &pt->r9); - PUT_NAT_BIT(sw->caller_unat, &pt->r10); PUT_NAT_BIT(sw->caller_unat, &pt->r11); - PUT_NAT_BIT(sw->caller_unat, &pt->r12); PUT_NAT_BIT(sw->caller_unat, &pt->r13); - PUT_NAT_BIT(sw->caller_unat, &pt->r14); PUT_NAT_BIT(sw->caller_unat, &pt->r15); - nat_bits >>= 16; /* skip over bank0 NaT bits */ - PUT_NAT_BIT(sw->caller_unat, &pt->r16); PUT_NAT_BIT(sw->caller_unat, &pt->r17); - PUT_NAT_BIT(sw->caller_unat, &pt->r18); PUT_NAT_BIT(sw->caller_unat, &pt->r19); - PUT_NAT_BIT(sw->caller_unat, &pt->r20); PUT_NAT_BIT(sw->caller_unat, &pt->r21); - PUT_NAT_BIT(sw->caller_unat, &pt->r22); PUT_NAT_BIT(sw->caller_unat, &pt->r23); - PUT_NAT_BIT(sw->caller_unat, &pt->r24); PUT_NAT_BIT(sw->caller_unat, &pt->r25); - PUT_NAT_BIT(sw->caller_unat, &pt->r26); PUT_NAT_BIT(sw->caller_unat, &pt->r27); - PUT_NAT_BIT(sw->caller_unat, &pt->r28); PUT_NAT_BIT(sw->caller_unat, &pt->r29); - PUT_NAT_BIT(sw->caller_unat, &pt->r30); PUT_NAT_BIT(sw->caller_unat, &pt->r31); -} - -static void -init_handler_platform (pal_min_state_area_t *ms, - struct pt_regs *pt, struct switch_stack *sw) -{ - struct unw_frame_info info; - - /* if a kernel debugger is available call it here else just dump the registers */ - - /* - * Wait for a bit. On some machines (e.g., HP's zx2000 and zx6000, INIT can be - * generated via the BMC's command-line interface, but since the console is on the - * same serial line, the user will need some time to switch out of the BMC before - * the dump begins. - */ - printk("Delaying for 5 seconds...\n"); - udelay(5*1000000); - show_min_state(ms); - - printk("Backtrace of current task (pid %d, %s)\n", current->pid, current->comm); - fetch_min_state(ms, pt, sw); - unw_init_from_interruption(&info, current, pt, sw); - ia64_do_show_stack(&info, NULL); - -#ifdef CONFIG_SMP - /* read_trylock() would be handy... */ - if (!tasklist_lock.write_lock) - read_lock(&tasklist_lock); -#endif - { - struct task_struct *g, *t; - do_each_thread (g, t) { - if (t == current) - continue; - - printk("\nBacktrace of pid %d (%s)\n", t->pid, t->comm); - show_stack(t, NULL); - } while_each_thread (g, t); - } -#ifdef CONFIG_SMP - if (!tasklist_lock.write_lock) - read_unlock(&tasklist_lock); -#endif - - printk("\nINIT dump complete. Please reboot now.\n"); - while (1); /* hang city if no debugger */ -} - #ifdef CONFIG_ACPI /* * ia64_mca_register_cpev @@ -657,42 +478,6 @@ ia64_mca_cmc_vector_enable_keventd(void *unused) } /* - * ia64_mca_wakeup_ipi_wait - * - * Wait for the inter-cpu interrupt to be sent by the - * monarch processor once it is done with handling the - * MCA. - * - * Inputs : None - * Outputs : None - */ -static void -ia64_mca_wakeup_ipi_wait(void) -{ - int irr_num = (IA64_MCA_WAKEUP_VECTOR >> 6); - int irr_bit = (IA64_MCA_WAKEUP_VECTOR & 0x3f); - u64 irr = 0; - - do { - switch(irr_num) { - case 0: - irr = ia64_getreg(_IA64_REG_CR_IRR0); - break; - case 1: - irr = ia64_getreg(_IA64_REG_CR_IRR1); - break; - case 2: - irr = ia64_getreg(_IA64_REG_CR_IRR2); - break; - case 3: - irr = ia64_getreg(_IA64_REG_CR_IRR3); - break; - } - cpu_relax(); - } while (!(irr & (1UL << irr_bit))) ; -} - -/* * ia64_mca_wakeup * * Send an inter-cpu interrupt to wake-up a particular cpu @@ -757,11 +542,9 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *ptregs) */ ia64_sal_mc_rendez(); - /* Wait for the wakeup IPI from the monarch - * This waiting is done by polling on the wakeup-interrupt - * vector bit in the processor's IRRs - */ - ia64_mca_wakeup_ipi_wait(); + /* Wait for the monarch cpu to exit. */ + while (monarch_cpu != -1) + cpu_relax(); /* spin until monarch leaves */ /* Enable all interrupts */ local_irq_restore(flags); @@ -789,53 +572,13 @@ ia64_mca_wakeup_int_handler(int wakeup_irq, void *arg, struct pt_regs *ptregs) return IRQ_HANDLED; } -/* - * ia64_return_to_sal_check - * - * This is function called before going back from the OS_MCA handler - * to the OS_MCA dispatch code which finally takes the control back - * to the SAL. - * The main purpose of this routine is to setup the OS_MCA to SAL - * return state which can be used by the OS_MCA dispatch code - * just before going back to SAL. - * - * Inputs : None - * Outputs : None - */ - -static void -ia64_return_to_sal_check(int recover) -{ - - /* Copy over some relevant stuff from the sal_to_os_mca_handoff - * so that it can be used at the time of os_mca_to_sal_handoff - */ - ia64_os_to_sal_handoff_state.imots_sal_gp = - ia64_sal_to_os_handoff_state.imsto_sal_gp; - - ia64_os_to_sal_handoff_state.imots_sal_check_ra = - ia64_sal_to_os_handoff_state.imsto_sal_check_ra; - - if (recover) - ia64_os_to_sal_handoff_state.imots_os_status = IA64_MCA_CORRECTED; - else - ia64_os_to_sal_handoff_state.imots_os_status = IA64_MCA_COLD_BOOT; - - /* Default = tell SAL to return to same context */ - ia64_os_to_sal_handoff_state.imots_context = IA64_MCA_SAME_CONTEXT; - - ia64_os_to_sal_handoff_state.imots_new_min_state = - (u64 *)ia64_sal_to_os_handoff_state.pal_min_state; - -} - /* Function pointer for extra MCA recovery */ int (*ia64_mca_ucmc_extension) - (void*,ia64_mca_sal_to_os_state_t*,ia64_mca_os_to_sal_state_t*) + (void*,struct ia64_sal_os_state*) = NULL; int -ia64_reg_MCA_extension(void *fn) +ia64_reg_MCA_extension(int (*fn)(void *, struct ia64_sal_os_state *)) { if (ia64_mca_ucmc_extension) return 1; @@ -854,8 +597,321 @@ ia64_unreg_MCA_extension(void) EXPORT_SYMBOL(ia64_reg_MCA_extension); EXPORT_SYMBOL(ia64_unreg_MCA_extension); + +static inline void +copy_reg(const u64 *fr, u64 fnat, u64 *tr, u64 *tnat) +{ + u64 fslot, tslot, nat; + *tr = *fr; + fslot = ((unsigned long)fr >> 3) & 63; + tslot = ((unsigned long)tr >> 3) & 63; + *tnat &= ~(1UL << tslot); + nat = (fnat >> fslot) & 1; + *tnat |= (nat << tslot); +} + +/* On entry to this routine, we are running on the per cpu stack, see + * mca_asm.h. The original stack has not been touched by this event. Some of + * the original stack's registers will be in the RBS on this stack. This stack + * also contains a partial pt_regs and switch_stack, the rest of the data is in + * PAL minstate. + * + * The first thing to do is modify the original stack to look like a blocked + * task so we can run backtrace on the original task. Also mark the per cpu + * stack as current to ensure that we use the correct task state, it also means + * that we can do backtrace on the MCA/INIT handler code itself. + */ + +static task_t * +ia64_mca_modify_original_stack(struct pt_regs *regs, + const struct switch_stack *sw, + struct ia64_sal_os_state *sos, + const char *type) +{ + char *p, comm[sizeof(current->comm)]; + ia64_va va; + extern char ia64_leave_kernel[]; /* Need asm address, not function descriptor */ + const pal_min_state_area_t *ms = sos->pal_min_state; + task_t *previous_current; + struct pt_regs *old_regs; + struct switch_stack *old_sw; + unsigned size = sizeof(struct pt_regs) + + sizeof(struct switch_stack) + 16; + u64 *old_bspstore, *old_bsp; + u64 *new_bspstore, *new_bsp; + u64 old_unat, old_rnat, new_rnat, nat; + u64 slots, loadrs = regs->loadrs; + u64 r12 = ms->pmsa_gr[12-1], r13 = ms->pmsa_gr[13-1]; + u64 ar_bspstore = regs->ar_bspstore; + u64 ar_bsp = regs->ar_bspstore + (loadrs >> 16); + const u64 *bank; + const char *msg; + int cpu = smp_processor_id(); + + previous_current = curr_task(cpu); + set_curr_task(cpu, current); + if ((p = strchr(current->comm, ' '))) + *p = '\0'; + + /* Best effort attempt to cope with MCA/INIT delivered while in + * physical mode. + */ + regs->cr_ipsr = ms->pmsa_ipsr; + if (ia64_psr(regs)->dt == 0) { + va.l = r12; + if (va.f.reg == 0) { + va.f.reg = 7; + r12 = va.l; + } + va.l = r13; + if (va.f.reg == 0) { + va.f.reg = 7; + r13 = va.l; + } + } + if (ia64_psr(regs)->rt == 0) { + va.l = ar_bspstore; + if (va.f.reg == 0) { + va.f.reg = 7; + ar_bspstore = va.l; + } + va.l = ar_bsp; + if (va.f.reg == 0) { + va.f.reg = 7; + ar_bsp = va.l; + } + } + + /* mca_asm.S ia64_old_stack() cannot assume that the dirty registers + * have been copied to the old stack, the old stack may fail the + * validation tests below. So ia64_old_stack() must restore the dirty + * registers from the new stack. The old and new bspstore probably + * have different alignments, so loadrs calculated on the old bsp + * cannot be used to restore from the new bsp. Calculate a suitable + * loadrs for the new stack and save it in the new pt_regs, where + * ia64_old_stack() can get it. + */ + old_bspstore = (u64 *)ar_bspstore; + old_bsp = (u64 *)ar_bsp; + slots = ia64_rse_num_regs(old_bspstore, old_bsp); + new_bspstore = (u64 *)((u64)current + IA64_RBS_OFFSET); + new_bsp = ia64_rse_skip_regs(new_bspstore, slots); + regs->loadrs = (new_bsp - new_bspstore) * 8 << 16; + + /* Verify the previous stack state before we change it */ + if (user_mode(regs)) { + msg = "occurred in user space"; + goto no_mod; + } + if (r13 != sos->prev_IA64_KR_CURRENT) { + msg = "inconsistent previous current and r13"; + goto no_mod; + } + if ((r12 - r13) >= KERNEL_STACK_SIZE) { + msg = "inconsistent r12 and r13"; + goto no_mod; + } + if ((ar_bspstore - r13) >= KERNEL_STACK_SIZE) { + msg = "inconsistent ar.bspstore and r13"; + goto no_mod; + } + va.p = old_bspstore; + if (va.f.reg < 5) { + msg = "old_bspstore is in the wrong region"; + goto no_mod; + } + if ((ar_bsp - r13) >= KERNEL_STACK_SIZE) { + msg = "inconsistent ar.bsp and r13"; + goto no_mod; + } + size += (ia64_rse_skip_regs(old_bspstore, slots) - old_bspstore) * 8; + if (ar_bspstore + size > r12) { + msg = "no room for blocked state"; + goto no_mod; + } + + /* Change the comm field on the MCA/INT task to include the pid that + * was interrupted, it makes for easier debugging. If that pid was 0 + * (swapper or nested MCA/INIT) then use the start of the previous comm + * field suffixed with its cpu. + */ + if (previous_current->pid) + snprintf(comm, sizeof(comm), "%s %d", + current->comm, previous_current->pid); + else { + int l; + if ((p = strchr(previous_current->comm, ' '))) + l = p - previous_current->comm; + else + l = strlen(previous_current->comm); + snprintf(comm, sizeof(comm), "%s %*s %d", + current->comm, l, previous_current->comm, + previous_current->thread_info->cpu); + } + memcpy(current->comm, comm, sizeof(current->comm)); + + /* Make the original task look blocked. First stack a struct pt_regs, + * describing the state at the time of interrupt. mca_asm.S built a + * partial pt_regs, copy it and fill in the blanks using minstate. + */ + p = (char *)r12 - sizeof(*regs); + old_regs = (struct pt_regs *)p; + memcpy(old_regs, regs, sizeof(*regs)); + /* If ipsr.ic then use pmsa_{iip,ipsr,ifs}, else use + * pmsa_{xip,xpsr,xfs} + */ + if (ia64_psr(regs)->ic) { + old_regs->cr_iip = ms->pmsa_iip; + old_regs->cr_ipsr = ms->pmsa_ipsr; + old_regs->cr_ifs = ms->pmsa_ifs; + } else { + old_regs->cr_iip = ms->pmsa_xip; + old_regs->cr_ipsr = ms->pmsa_xpsr; + old_regs->cr_ifs = ms->pmsa_xfs; + } + old_regs->pr = ms->pmsa_pr; + old_regs->b0 = ms->pmsa_br0; + old_regs->loadrs = loadrs; + old_regs->ar_rsc = ms->pmsa_rsc; + old_unat = old_regs->ar_unat; + copy_reg(&ms->pmsa_gr[1-1], ms->pmsa_nat_bits, &old_regs->r1, &old_unat); + copy_reg(&ms->pmsa_gr[2-1], ms->pmsa_nat_bits, &old_regs->r2, &old_unat); + copy_reg(&ms->pmsa_gr[3-1], ms->pmsa_nat_bits, &old_regs->r3, &old_unat); + copy_reg(&ms->pmsa_gr[8-1], ms->pmsa_nat_bits, &old_regs->r8, &old_unat); + copy_reg(&ms->pmsa_gr[9-1], ms->pmsa_nat_bits, &old_regs->r9, &old_unat); + copy_reg(&ms->pmsa_gr[10-1], ms->pmsa_nat_bits, &old_regs->r10, &old_unat); + copy_reg(&ms->pmsa_gr[11-1], ms->pmsa_nat_bits, &old_regs->r11, &old_unat); + copy_reg(&ms->pmsa_gr[12-1], ms->pmsa_nat_bits, &old_regs->r12, &old_unat); + copy_reg(&ms->pmsa_gr[13-1], ms->pmsa_nat_bits, &old_regs->r13, &old_unat); + copy_reg(&ms->pmsa_gr[14-1], ms->pmsa_nat_bits, &old_regs->r14, &old_unat); + copy_reg(&ms->pmsa_gr[15-1], ms->pmsa_nat_bits, &old_regs->r15, &old_unat); + if (ia64_psr(old_regs)->bn) + bank = ms->pmsa_bank1_gr; + else + bank = ms->pmsa_bank0_gr; + copy_reg(&bank[16-16], ms->pmsa_nat_bits, &old_regs->r16, &old_unat); + copy_reg(&bank[17-16], ms->pmsa_nat_bits, &old_regs->r17, &old_unat); + copy_reg(&bank[18-16], ms->pmsa_nat_bits, &old_regs->r18, &old_unat); + copy_reg(&bank[19-16], ms->pmsa_nat_bits, &old_regs->r19, &old_unat); + copy_reg(&bank[20-16], ms->pmsa_nat_bits, &old_regs->r20, &old_unat); + copy_reg(&bank[21-16], ms->pmsa_nat_bits, &old_regs->r21, &old_unat); + copy_reg(&bank[22-16], ms->pmsa_nat_bits, &old_regs->r22, &old_unat); + copy_reg(&bank[23-16], ms->pmsa_nat_bits, &old_regs->r23, &old_unat); + copy_reg(&bank[24-16], ms->pmsa_nat_bits, &old_regs->r24, &old_unat); + copy_reg(&bank[25-16], ms->pmsa_nat_bits, &old_regs->r25, &old_unat); + copy_reg(&bank[26-16], ms->pmsa_nat_bits, &old_regs->r26, &old_unat); + copy_reg(&bank[27-16], ms->pmsa_nat_bits, &old_regs->r27, &old_unat); + copy_reg(&bank[28-16], ms->pmsa_nat_bits, &old_regs->r28, &old_unat); + copy_reg(&bank[29-16], ms->pmsa_nat_bits, &old_regs->r29, &old_unat); + copy_reg(&bank[30-16], ms->pmsa_nat_bits, &old_regs->r30, &old_unat); + copy_reg(&bank[31-16], ms->pmsa_nat_bits, &old_regs->r31, &old_unat); + + /* Next stack a struct switch_stack. mca_asm.S built a partial + * switch_stack, copy it and fill in the blanks using pt_regs and + * minstate. + * + * In the synthesized switch_stack, b0 points to ia64_leave_kernel, + * ar.pfs is set to 0. + * + * unwind.c::unw_unwind() does special processing for interrupt frames. + * It checks if the PRED_NON_SYSCALL predicate is set, if the predicate + * is clear then unw_unwind() does _not_ adjust bsp over pt_regs. Not + * that this is documented, of course. Set PRED_NON_SYSCALL in the + * switch_stack on the original stack so it will unwind correctly when + * unwind.c reads pt_regs. + * + * thread.ksp is updated to point to the synthesized switch_stack. + */ + p -= sizeof(struct switch_stack); + old_sw = (struct switch_stack *)p; + memcpy(old_sw, sw, sizeof(*sw)); + old_sw->caller_unat = old_unat; + old_sw->ar_fpsr = old_regs->ar_fpsr; + copy_reg(&ms->pmsa_gr[4-1], ms->pmsa_nat_bits, &old_sw->r4, &old_unat); + copy_reg(&ms->pmsa_gr[5-1], ms->pmsa_nat_bits, &old_sw->r5, &old_unat); + copy_reg(&ms->pmsa_gr[6-1], ms->pmsa_nat_bits, &old_sw->r6, &old_unat); + copy_reg(&ms->pmsa_gr[7-1], ms->pmsa_nat_bits, &old_sw->r7, &old_unat); + old_sw->b0 = (u64)ia64_leave_kernel; + old_sw->b1 = ms->pmsa_br1; + old_sw->ar_pfs = 0; + old_sw->ar_unat = old_unat; + old_sw->pr = old_regs->pr | (1UL << PRED_NON_SYSCALL); + previous_current->thread.ksp = (u64)p - 16; + + /* Finally copy the original stack's registers back to its RBS. + * Registers from ar.bspstore through ar.bsp at the time of the event + * are in the current RBS, copy them back to the original stack. The + * copy must be done register by register because the original bspstore + * and the current one have different alignments, so the saved RNAT + * data occurs at different places. + * + * mca_asm does cover, so the old_bsp already includes all registers at + * the time of MCA/INIT. It also does flushrs, so all registers before + * this function have been written to backing store on the MCA/INIT + * stack. + */ + new_rnat = ia64_get_rnat(ia64_rse_rnat_addr(new_bspstore)); + old_rnat = regs->ar_rnat; + while (slots--) { + if (ia64_rse_is_rnat_slot(new_bspstore)) { + new_rnat = ia64_get_rnat(new_bspstore++); + } + if (ia64_rse_is_rnat_slot(old_bspstore)) { + *old_bspstore++ = old_rnat; + old_rnat = 0; + } + nat = (new_rnat >> ia64_rse_slot_num(new_bspstore)) & 1UL; + old_rnat &= ~(1UL << ia64_rse_slot_num(old_bspstore)); + old_rnat |= (nat << ia64_rse_slot_num(old_bspstore)); + *old_bspstore++ = *new_bspstore++; + } + old_sw->ar_bspstore = (unsigned long)old_bspstore; + old_sw->ar_rnat = old_rnat; + + sos->prev_task = previous_current; + return previous_current; + +no_mod: + printk(KERN_INFO "cpu %d, %s %s, original stack not modified\n", + smp_processor_id(), type, msg); + return previous_current; +} + +/* The monarch/slave interaction is based on monarch_cpu and requires that all + * slaves have entered rendezvous before the monarch leaves. If any cpu has + * not entered rendezvous yet then wait a bit. The assumption is that any + * slave that has not rendezvoused after a reasonable time is never going to do + * so. In this context, slave includes cpus that respond to the MCA rendezvous + * interrupt, as well as cpus that receive the INIT slave event. + */ + +static void +ia64_wait_for_slaves(int monarch) +{ + int c, wait = 0; + for_each_online_cpu(c) { + if (c == monarch) + continue; + if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) { + udelay(1000); /* short wait first */ + wait = 1; + break; + } + } + if (!wait) + return; + for_each_online_cpu(c) { + if (c == monarch) + continue; + if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) { + udelay(5*1000000); /* wait 5 seconds for slaves (arbitrary) */ + break; + } + } +} + /* - * ia64_mca_ucmc_handler + * ia64_mca_handler * * This is uncorrectable machine check handler called from OS_MCA * dispatch code which is in turn called from SAL_CHECK(). @@ -866,16 +922,28 @@ EXPORT_SYMBOL(ia64_unreg_MCA_extension); * further MCA logging is enabled by clearing logs. * Monarch also has the duty of sending wakeup-IPIs to pull the * slave processors out of rendezvous spinloop. - * - * Inputs : None - * Outputs : None */ void -ia64_mca_ucmc_handler(void) +ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, + struct ia64_sal_os_state *sos) { pal_processor_state_info_t *psp = (pal_processor_state_info_t *) - &ia64_sal_to_os_handoff_state.proc_state_param; - int recover; + &sos->proc_state_param; + int recover, cpu = smp_processor_id(); + task_t *previous_current; + + oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */ + previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "MCA"); + monarch_cpu = cpu; + ia64_wait_for_slaves(cpu); + + /* Wakeup all the processors which are spinning in the rendezvous loop. + * They will leave SAL, then spin in the OS with interrupts disabled + * until this monarch cpu leaves the MCA handler. That gets control + * back to the OS so we can backtrace the other cpus, backtrace when + * spinning in SAL does not work. + */ + ia64_mca_wakeup_all(); /* Get the MCA error record and log it */ ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA); @@ -883,25 +951,20 @@ ia64_mca_ucmc_handler(void) /* TLB error is only exist in this SAL error record */ recover = (psp->tc && !(psp->cc || psp->bc || psp->rc || psp->uc)) /* other error recovery */ - || (ia64_mca_ucmc_extension + || (ia64_mca_ucmc_extension && ia64_mca_ucmc_extension( IA64_LOG_CURR_BUFFER(SAL_INFO_TYPE_MCA), - &ia64_sal_to_os_handoff_state, - &ia64_os_to_sal_handoff_state)); + sos)); if (recover) { sal_log_record_header_t *rh = IA64_LOG_CURR_BUFFER(SAL_INFO_TYPE_MCA); rh->severity = sal_log_severity_corrected; ia64_sal_clear_state_info(SAL_INFO_TYPE_MCA); + sos->os_status = IA64_MCA_CORRECTED; } - /* - * Wakeup all the processors which are spinning in the rendezvous - * loop. - */ - ia64_mca_wakeup_all(); - /* Return to SAL */ - ia64_return_to_sal_check(recover); + set_curr_task(cpu, previous_current); + monarch_cpu = -1; } static DECLARE_WORK(cmc_disable_work, ia64_mca_cmc_vector_disable_keventd, NULL); @@ -1125,34 +1188,114 @@ ia64_mca_cpe_poll (unsigned long dummy) /* * C portion of the OS INIT handler * - * Called from ia64_monarch_init_handler - * - * Inputs: pointer to pt_regs where processor info was saved. + * Called from ia64_os_init_dispatch * - * Returns: - * 0 if SAL must warm boot the System - * 1 if SAL must return to interrupted context using PAL_MC_RESUME + * Inputs: pointer to pt_regs where processor info was saved. SAL/OS state for + * this event. This code is used for both monarch and slave INIT events, see + * sos->monarch. * + * All INIT events switch to the INIT stack and change the previous process to + * blocked status. If one of the INIT events is the monarch then we are + * probably processing the nmi button/command. Use the monarch cpu to dump all + * the processes. The slave INIT events all spin until the monarch cpu + * returns. We can also get INIT slave events for MCA, in which case the MCA + * process is the monarch. */ + void -ia64_init_handler (struct pt_regs *pt, struct switch_stack *sw) +ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, + struct ia64_sal_os_state *sos) { - pal_min_state_area_t *ms; + static atomic_t slaves; + static atomic_t monarchs; + task_t *previous_current; + int cpu = smp_processor_id(), c; + struct task_struct *g, *t; - oops_in_progress = 1; /* avoid deadlock in printk, but it makes recovery dodgy */ + oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */ console_loglevel = 15; /* make sure printks make it to console */ - printk(KERN_INFO "Entered OS INIT handler. PSP=%lx\n", - ia64_sal_to_os_handoff_state.proc_state_param); + printk(KERN_INFO "Entered OS INIT handler. PSP=%lx cpu=%d monarch=%ld\n", + sos->proc_state_param, cpu, sos->monarch); + salinfo_log_wakeup(SAL_INFO_TYPE_INIT, NULL, 0, 0); - /* - * Address of minstate area provided by PAL is physical, - * uncacheable (bit 63 set). Convert to Linux virtual - * address in region 6. + previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "INIT"); + sos->os_status = IA64_INIT_RESUME; + + /* FIXME: Workaround for broken proms that drive all INIT events as + * slaves. The last slave that enters is promoted to be a monarch. + * Remove this code in September 2006, that gives platforms a year to + * fix their proms and get their customers updated. */ - ms = (pal_min_state_area_t *)(ia64_sal_to_os_handoff_state.pal_min_state | (6ul<<61)); + if (!sos->monarch && atomic_add_return(1, &slaves) == num_online_cpus()) { + printk(KERN_WARNING "%s: Promoting cpu %d to monarch.\n", + __FUNCTION__, cpu); + atomic_dec(&slaves); + sos->monarch = 1; + } + + /* FIXME: Workaround for broken proms that drive all INIT events as + * monarchs. Second and subsequent monarchs are demoted to slaves. + * Remove this code in September 2006, that gives platforms a year to + * fix their proms and get their customers updated. + */ + if (sos->monarch && atomic_add_return(1, &monarchs) > 1) { + printk(KERN_WARNING "%s: Demoting cpu %d to slave.\n", + __FUNCTION__, cpu); + atomic_dec(&monarchs); + sos->monarch = 0; + } - init_handler_platform(ms, pt, sw); /* call platform specific routines */ + if (!sos->monarch) { + ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_INIT; + while (monarch_cpu == -1) + cpu_relax(); /* spin until monarch enters */ + while (monarch_cpu != -1) + cpu_relax(); /* spin until monarch leaves */ + printk("Slave on cpu %d returning to normal service.\n", cpu); + set_curr_task(cpu, previous_current); + ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE; + atomic_dec(&slaves); + return; + } + + monarch_cpu = cpu; + + /* + * Wait for a bit. On some machines (e.g., HP's zx2000 and zx6000, INIT can be + * generated via the BMC's command-line interface, but since the console is on the + * same serial line, the user will need some time to switch out of the BMC before + * the dump begins. + */ + printk("Delaying for 5 seconds...\n"); + udelay(5*1000000); + ia64_wait_for_slaves(cpu); + printk(KERN_ERR "Processes interrupted by INIT -"); + for_each_online_cpu(c) { + struct ia64_sal_os_state *s; + t = __va(__per_cpu_mca[c] + IA64_MCA_CPU_INIT_STACK_OFFSET); + s = (struct ia64_sal_os_state *)((char *)t + MCA_SOS_OFFSET); + g = s->prev_task; + if (g) { + if (g->pid) + printk(" %d", g->pid); + else + printk(" %d (cpu %d task 0x%p)", g->pid, task_cpu(g), g); + } + } + printk("\n\n"); + if (read_trylock(&tasklist_lock)) { + do_each_thread (g, t) { + printk("\nBacktrace of pid %d (%s)\n", t->pid, t->comm); + show_stack(t, NULL); + } while_each_thread (g, t); + read_unlock(&tasklist_lock); + } + printk("\nINIT dump complete. Monarch on cpu %d returning to normal service.\n", cpu); + atomic_dec(&monarchs); + set_curr_task(cpu, previous_current); + monarch_cpu = -1; + return; } static int __init @@ -1202,6 +1345,34 @@ static struct irqaction mca_cpep_irqaction = { }; #endif /* CONFIG_ACPI */ +/* Minimal format of the MCA/INIT stacks. The pseudo processes that run on + * these stacks can never sleep, they cannot return from the kernel to user + * space, they do not appear in a normal ps listing. So there is no need to + * format most of the fields. + */ + +static void +format_mca_init_stack(void *mca_data, unsigned long offset, + const char *type, int cpu) +{ + struct task_struct *p = (struct task_struct *)((char *)mca_data + offset); + struct thread_info *ti; + memset(p, 0, KERNEL_STACK_SIZE); + ti = (struct thread_info *)((char *)p + IA64_TASK_SIZE); + ti->flags = _TIF_MCA_INIT; + ti->preempt_count = 1; + ti->task = p; + ti->cpu = cpu; + p->thread_info = ti; + p->state = TASK_UNINTERRUPTIBLE; + __set_bit(cpu, &p->cpus_allowed); + INIT_LIST_HEAD(&p->tasks); + p->parent = p->real_parent = p->group_leader = p; + INIT_LIST_HEAD(&p->children); + INIT_LIST_HEAD(&p->sibling); + strncpy(p->comm, type, sizeof(p->comm)-1); +} + /* Do per-CPU MCA-related initialization. */ void __devinit @@ -1214,19 +1385,28 @@ ia64_mca_cpu_init(void *cpu_data) int cpu; mca_data = alloc_bootmem(sizeof(struct ia64_mca_cpu) - * NR_CPUS); + * NR_CPUS + KERNEL_STACK_SIZE); + mca_data = (void *)(((unsigned long)mca_data + + KERNEL_STACK_SIZE - 1) & + (-KERNEL_STACK_SIZE)); for (cpu = 0; cpu < NR_CPUS; cpu++) { + format_mca_init_stack(mca_data, + offsetof(struct ia64_mca_cpu, mca_stack), + "MCA", cpu); + format_mca_init_stack(mca_data, + offsetof(struct ia64_mca_cpu, init_stack), + "INIT", cpu); __per_cpu_mca[cpu] = __pa(mca_data); mca_data += sizeof(struct ia64_mca_cpu); } } - /* - * The MCA info structure was allocated earlier and its - * physical address saved in __per_cpu_mca[cpu]. Copy that - * address * to ia64_mca_data so we can access it as a per-CPU - * variable. - */ + /* + * The MCA info structure was allocated earlier and its + * physical address saved in __per_cpu_mca[cpu]. Copy that + * address * to ia64_mca_data so we can access it as a per-CPU + * variable. + */ __get_cpu_var(ia64_mca_data) = __per_cpu_mca[smp_processor_id()]; /* @@ -1236,11 +1416,11 @@ ia64_mca_cpu_init(void *cpu_data) __get_cpu_var(ia64_mca_per_cpu_pte) = pte_val(mk_pte_phys(__pa(cpu_data), PAGE_KERNEL)); - /* - * Also, stash away a copy of the PAL address and the PTE - * needed to map it. - */ - pal_vaddr = efi_get_pal_addr(); + /* + * Also, stash away a copy of the PAL address and the PTE + * needed to map it. + */ + pal_vaddr = efi_get_pal_addr(); if (!pal_vaddr) return; __get_cpu_var(ia64_mca_pal_base) = @@ -1272,8 +1452,8 @@ ia64_mca_cpu_init(void *cpu_data) void __init ia64_mca_init(void) { - ia64_fptr_t *mon_init_ptr = (ia64_fptr_t *)ia64_monarch_init_handler; - ia64_fptr_t *slave_init_ptr = (ia64_fptr_t *)ia64_slave_init_handler; + ia64_fptr_t *init_hldlr_ptr_monarch = (ia64_fptr_t *)ia64_os_init_dispatch_monarch; + ia64_fptr_t *init_hldlr_ptr_slave = (ia64_fptr_t *)ia64_os_init_dispatch_slave; ia64_fptr_t *mca_hldlr_ptr = (ia64_fptr_t *)ia64_os_mca_dispatch; int i; s64 rc; @@ -1351,9 +1531,9 @@ ia64_mca_init(void) * XXX - disable SAL checksum by setting size to 0, should be * size of the actual init handler in mca_asm.S. */ - ia64_mc_info.imi_monarch_init_handler = ia64_tpa(mon_init_ptr->fp); + ia64_mc_info.imi_monarch_init_handler = ia64_tpa(init_hldlr_ptr_monarch->fp); ia64_mc_info.imi_monarch_init_handler_size = 0; - ia64_mc_info.imi_slave_init_handler = ia64_tpa(slave_init_ptr->fp); + ia64_mc_info.imi_slave_init_handler = ia64_tpa(init_hldlr_ptr_slave->fp); ia64_mc_info.imi_slave_init_handler_size = 0; IA64_MCA_DEBUG("%s: OS INIT handler at %lx\n", __FUNCTION__, diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S index ef3fd7265b67..499a065f4e60 100644 --- a/arch/ia64/kernel/mca_asm.S +++ b/arch/ia64/kernel/mca_asm.S @@ -16,6 +16,9 @@ // 04/11/12 Russ Anderson <rja@sgi.com> // Added per cpu MCA/INIT stack save areas. // +// 12/08/05 Keith Owens <kaos@sgi.com> +// Use per cpu MCA/INIT stacks for all data. +// #include <linux/config.h> #include <linux/threads.h> @@ -25,96 +28,23 @@ #include <asm/mca_asm.h> #include <asm/mca.h> -/* - * When we get a machine check, the kernel stack pointer is no longer - * valid, so we need to set a new stack pointer. - */ -#define MINSTATE_PHYS /* Make sure stack access is physical for MINSTATE */ - -/* - * Needed for return context to SAL - */ -#define IA64_MCA_SAME_CONTEXT 0 -#define IA64_MCA_COLD_BOOT -2 - -#include "minstate.h" - -/* - * SAL_TO_OS_MCA_HANDOFF_STATE (SAL 3.0 spec) - * 1. GR1 = OS GP - * 2. GR8 = PAL_PROC physical address - * 3. GR9 = SAL_PROC physical address - * 4. GR10 = SAL GP (physical) - * 5. GR11 = Rendez state - * 6. GR12 = Return address to location within SAL_CHECK - */ -#define SAL_TO_OS_MCA_HANDOFF_STATE_SAVE(_tmp) \ - LOAD_PHYSICAL(p0, _tmp, ia64_sal_to_os_handoff_state);; \ - st8 [_tmp]=r1,0x08;; \ - st8 [_tmp]=r8,0x08;; \ - st8 [_tmp]=r9,0x08;; \ - st8 [_tmp]=r10,0x08;; \ - st8 [_tmp]=r11,0x08;; \ - st8 [_tmp]=r12,0x08;; \ - st8 [_tmp]=r17,0x08;; \ - st8 [_tmp]=r18,0x08 - -/* - * OS_MCA_TO_SAL_HANDOFF_STATE (SAL 3.0 spec) - * (p6) is executed if we never entered virtual mode (TLB error) - * (p7) is executed if we entered virtual mode as expected (normal case) - * 1. GR8 = OS_MCA return status - * 2. GR9 = SAL GP (physical) - * 3. GR10 = 0/1 returning same/new context - * 4. GR22 = New min state save area pointer - * returns ptr to SAL rtn save loc in _tmp - */ -#define OS_MCA_TO_SAL_HANDOFF_STATE_RESTORE(_tmp) \ - movl _tmp=ia64_os_to_sal_handoff_state;; \ - DATA_VA_TO_PA(_tmp);; \ - ld8 r8=[_tmp],0x08;; \ - ld8 r9=[_tmp],0x08;; \ - ld8 r10=[_tmp],0x08;; \ - ld8 r22=[_tmp],0x08;; - // now _tmp is pointing to SAL rtn save location - -/* - * COLD_BOOT_HANDOFF_STATE() sets ia64_mca_os_to_sal_state - * imots_os_status=IA64_MCA_COLD_BOOT - * imots_sal_gp=SAL GP - * imots_context=IA64_MCA_SAME_CONTEXT - * imots_new_min_state=Min state save area pointer - * imots_sal_check_ra=Return address to location within SAL_CHECK - * - */ -#define COLD_BOOT_HANDOFF_STATE(sal_to_os_handoff,os_to_sal_handoff,tmp)\ - movl tmp=IA64_MCA_COLD_BOOT; \ - movl sal_to_os_handoff=__pa(ia64_sal_to_os_handoff_state); \ - movl os_to_sal_handoff=__pa(ia64_os_to_sal_handoff_state);; \ - st8 [os_to_sal_handoff]=tmp,8;; \ - ld8 tmp=[sal_to_os_handoff],48;; \ - st8 [os_to_sal_handoff]=tmp,8;; \ - movl tmp=IA64_MCA_SAME_CONTEXT;; \ - st8 [os_to_sal_handoff]=tmp,8;; \ - ld8 tmp=[sal_to_os_handoff],-8;; \ - st8 [os_to_sal_handoff]=tmp,8;; \ - ld8 tmp=[sal_to_os_handoff];; \ - st8 [os_to_sal_handoff]=tmp;; +#include "entry.h" #define GET_IA64_MCA_DATA(reg) \ GET_THIS_PADDR(reg, ia64_mca_data) \ ;; \ ld8 reg=[reg] - .global ia64_os_mca_dispatch - .global ia64_os_mca_dispatch_end - .global ia64_sal_to_os_handoff_state - .global ia64_os_to_sal_handoff_state .global ia64_do_tlb_purge + .global ia64_os_mca_dispatch + .global ia64_os_init_dispatch_monarch + .global ia64_os_init_dispatch_slave .text .align 16 +//StartMain//////////////////////////////////////////////////////////////////// + /* * Just the TLB purge part is moved to a separate function * so we can re-use the code for cpu hotplug code as well @@ -207,34 +137,31 @@ ia64_do_tlb_purge: br.sptk.many b1 ;; -ia64_os_mca_dispatch: +//EndMain////////////////////////////////////////////////////////////////////// + +//StartMain//////////////////////////////////////////////////////////////////// +ia64_os_mca_dispatch: // Serialize all MCA processing mov r3=1;; LOAD_PHYSICAL(p0,r2,ia64_mca_serialize);; ia64_os_mca_spin: - xchg8 r4=[r2],r3;; + xchg4 r4=[r2],r3;; cmp.ne p6,p0=r4,r0 (p6) br ia64_os_mca_spin - // Save the SAL to OS MCA handoff state as defined - // by SAL SPEC 3.0 - // NOTE : The order in which the state gets saved - // is dependent on the way the C-structure - // for ia64_mca_sal_to_os_state_t has been - // defined in include/asm/mca.h - SAL_TO_OS_MCA_HANDOFF_STATE_SAVE(r2) - ;; - - // LOG PROCESSOR STATE INFO FROM HERE ON.. -begin_os_mca_dump: - br ia64_os_mca_proc_state_dump;; + mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack + LOAD_PHYSICAL(p0,r2,1f) // return address + mov r19=1 // All MCA events are treated as monarch (for now) + br.sptk ia64_state_save // save the state that is not in minstate +1: -ia64_os_mca_done_dump: - - LOAD_PHYSICAL(p0,r16,ia64_sal_to_os_handoff_state+56) + GET_IA64_MCA_DATA(r2) + // Using MCA stack, struct ia64_sal_os_state, variable proc_state_param + ;; + add r3=IA64_MCA_CPU_MCA_STACK_OFFSET+MCA_SOS_OFFSET+IA64_SAL_OS_STATE_PROC_STATE_PARAM_OFFSET, r2 ;; - ld8 r18=[r16] // Get processor state parameter on existing PALE_CHECK. + ld8 r18=[r3] // Get processor state parameter on existing PALE_CHECK. ;; tbit.nz p6,p7=r18,60 (p7) br.spnt done_tlb_purge_and_reload @@ -323,624 +250,775 @@ ia64_reload_tr: itr.d dtr[r20]=r16 ;; srlz.d - ;; - br.sptk.many done_tlb_purge_and_reload -err: - COLD_BOOT_HANDOFF_STATE(r20,r21,r22) - br.sptk.many ia64_os_mca_done_restore done_tlb_purge_and_reload: - // Setup new stack frame for OS_MCA handling - GET_IA64_MCA_DATA(r2) - ;; - add r3 = IA64_MCA_CPU_STACKFRAME_OFFSET, r2 - add r2 = IA64_MCA_CPU_RBSTORE_OFFSET, r2 - ;; - rse_switch_context(r6,r3,r2);; // RSC management in this new context + // switch to per cpu MCA stack + mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack + LOAD_PHYSICAL(p0,r2,1f) // return address + br.sptk ia64_new_stack +1: + + // everything saved, now we can set the kernel registers + mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack + LOAD_PHYSICAL(p0,r2,1f) // return address + br.sptk ia64_set_kernel_registers +1: + // This must be done in physical mode GET_IA64_MCA_DATA(r2) ;; - add r2 = IA64_MCA_CPU_STACK_OFFSET+IA64_MCA_STACK_SIZE-16, r2 - ;; - mov r12=r2 // establish new stack-pointer + mov r7=r2 // Enter virtual mode from physical mode VIRTUAL_MODE_ENTER(r2, r3, ia64_os_mca_virtual_begin, r4) -ia64_os_mca_virtual_begin: + + // This code returns to SAL via SOS r2, in general SAL has no unwind + // data. To get a clean termination when backtracing the C MCA/INIT + // handler, set a dummy return address of 0 in this routine. That + // requires that ia64_os_mca_virtual_begin be a global function. +ENTRY(ia64_os_mca_virtual_begin) + .prologue + .save rp,r0 + .body + + mov ar.rsc=3 // set eager mode for C handler + mov r2=r7 // see GET_IA64_MCA_DATA above + ;; // Call virtual mode handler - movl r2=ia64_mca_ucmc_handler;; - mov b6=r2;; - br.call.sptk.many b0=b6;; -.ret0: + alloc r14=ar.pfs,0,0,3,0 + ;; + DATA_PA_TO_VA(r2,r7) + ;; + add out0=IA64_MCA_CPU_MCA_STACK_OFFSET+MCA_PT_REGS_OFFSET, r2 + add out1=IA64_MCA_CPU_MCA_STACK_OFFSET+MCA_SWITCH_STACK_OFFSET, r2 + add out2=IA64_MCA_CPU_MCA_STACK_OFFSET+MCA_SOS_OFFSET, r2 + br.call.sptk.many b0=ia64_mca_handler + // Revert back to physical mode before going back to SAL PHYSICAL_MODE_ENTER(r2, r3, ia64_os_mca_virtual_end, r4) ia64_os_mca_virtual_end: - // restore the original stack frame here +END(ia64_os_mca_virtual_begin) + + // switch back to previous stack + alloc r14=ar.pfs,0,0,0,0 // remove the MCA handler frame + mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack + LOAD_PHYSICAL(p0,r2,1f) // return address + br.sptk ia64_old_stack +1: + + mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack + LOAD_PHYSICAL(p0,r2,1f) // return address + br.sptk ia64_state_restore // restore the SAL state +1: + + mov b0=r12 // SAL_CHECK return address + + // release lock + LOAD_PHYSICAL(p0,r3,ia64_mca_serialize);; + st4.rel [r3]=r0 + + br b0 + +//EndMain////////////////////////////////////////////////////////////////////// + +//StartMain//////////////////////////////////////////////////////////////////// + +// +// SAL to OS entry point for INIT on all processors. This has been defined for +// registration purposes with SAL as a part of ia64_mca_init. Monarch and +// slave INIT have identical processing, except for the value of the +// sos->monarch flag in r19. +// + +ia64_os_init_dispatch_monarch: + mov r19=1 // Bow, bow, ye lower middle classes! + br.sptk ia64_os_init_dispatch + +ia64_os_init_dispatch_slave: + mov r19=0 // <igor>yeth, mathter</igor> + +ia64_os_init_dispatch: + + mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack + LOAD_PHYSICAL(p0,r2,1f) // return address + br.sptk ia64_state_save // save the state that is not in minstate +1: + + // switch to per cpu INIT stack + mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack + LOAD_PHYSICAL(p0,r2,1f) // return address + br.sptk ia64_new_stack +1: + + // everything saved, now we can set the kernel registers + mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack + LOAD_PHYSICAL(p0,r2,1f) // return address + br.sptk ia64_set_kernel_registers +1: + + // This must be done in physical mode GET_IA64_MCA_DATA(r2) ;; - add r2 = IA64_MCA_CPU_STACKFRAME_OFFSET, r2 - ;; - movl r4=IA64_PSR_MC + mov r7=r2 + + // Enter virtual mode from physical mode + VIRTUAL_MODE_ENTER(r2, r3, ia64_os_init_virtual_begin, r4) + + // This code returns to SAL via SOS r2, in general SAL has no unwind + // data. To get a clean termination when backtracing the C MCA/INIT + // handler, set a dummy return address of 0 in this routine. That + // requires that ia64_os_init_virtual_begin be a global function. +ENTRY(ia64_os_init_virtual_begin) + .prologue + .save rp,r0 + .body + + mov ar.rsc=3 // set eager mode for C handler + mov r2=r7 // see GET_IA64_MCA_DATA above ;; - rse_return_context(r4,r3,r2) // switch from interrupt context for RSE - // let us restore all the registers from our PSI structure - mov r8=gp + // Call virtual mode handler + alloc r14=ar.pfs,0,0,3,0 + ;; + DATA_PA_TO_VA(r2,r7) ;; -begin_os_mca_restore: - br ia64_os_mca_proc_state_restore;; + add out0=IA64_MCA_CPU_INIT_STACK_OFFSET+MCA_PT_REGS_OFFSET, r2 + add out1=IA64_MCA_CPU_INIT_STACK_OFFSET+MCA_SWITCH_STACK_OFFSET, r2 + add out2=IA64_MCA_CPU_INIT_STACK_OFFSET+MCA_SOS_OFFSET, r2 + br.call.sptk.many b0=ia64_init_handler -ia64_os_mca_done_restore: - OS_MCA_TO_SAL_HANDOFF_STATE_RESTORE(r2);; - // branch back to SALE_CHECK - ld8 r3=[r2];; - mov b0=r3;; // SAL_CHECK return address + // Revert back to physical mode before going back to SAL + PHYSICAL_MODE_ENTER(r2, r3, ia64_os_init_virtual_end, r4) +ia64_os_init_virtual_end: - // release lock - movl r3=ia64_mca_serialize;; - DATA_VA_TO_PA(r3);; - st8.rel [r3]=r0 +END(ia64_os_init_virtual_begin) + + mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack + LOAD_PHYSICAL(p0,r2,1f) // return address + br.sptk ia64_state_restore // restore the SAL state +1: + // switch back to previous stack + alloc r14=ar.pfs,0,0,0,0 // remove the INIT handler frame + mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack + LOAD_PHYSICAL(p0,r2,1f) // return address + br.sptk ia64_old_stack +1: + + mov b0=r12 // SAL_CHECK return address br b0 - ;; -ia64_os_mca_dispatch_end: + //EndMain////////////////////////////////////////////////////////////////////// +// common defines for the stubs +#define ms r4 +#define regs r5 +#define temp1 r2 /* careful, it overlaps with input registers */ +#define temp2 r3 /* careful, it overlaps with input registers */ +#define temp3 r7 +#define temp4 r14 + //++ // Name: -// ia64_os_mca_proc_state_dump() +// ia64_state_save() // // Stub Description: // -// This stub dumps the processor state during MCHK to a data area +// Save the state that is not in minstate. This is sensitive to the layout of +// struct ia64_sal_os_state in mca.h. +// +// r2 contains the return address, r3 contains either +// IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET. +// +// The OS to SAL section of struct ia64_sal_os_state is set to a default +// value of cold boot (MCA) or warm boot (INIT) and return to the same +// context. ia64_sal_os_state is also used to hold some registers that +// need to be saved and restored across the stack switches. +// +// Most input registers to this stub come from PAL/SAL +// r1 os gp, physical +// r8 pal_proc entry point +// r9 sal_proc entry point +// r10 sal gp +// r11 MCA - rendevzous state, INIT - reason code +// r12 sal return address +// r17 pal min_state +// r18 processor state parameter +// r19 monarch flag, set by the caller of this routine +// +// In addition to the SAL to OS state, this routine saves all the +// registers that appear in struct pt_regs and struct switch_stack, +// excluding those that are already in the PAL minstate area. This +// results in a partial pt_regs and switch_stack, the C code copies the +// remaining registers from PAL minstate to pt_regs and switch_stack. The +// resulting structures contain all the state of the original process when +// MCA/INIT occurred. // //-- -ia64_os_mca_proc_state_dump: -// Save bank 1 GRs 16-31 which will be used by c-language code when we switch -// to virtual addressing mode. - GET_IA64_MCA_DATA(r2) +ia64_state_save: + add regs=MCA_SOS_OFFSET, r3 + add ms=MCA_SOS_OFFSET+8, r3 + mov b0=r2 // save return address + cmp.eq p1,p2=IA64_MCA_CPU_MCA_STACK_OFFSET, r3 + ;; + GET_IA64_MCA_DATA(temp2) + ;; + add temp1=temp2, regs // struct ia64_sal_os_state on MCA or INIT stack + add temp2=temp2, ms // struct ia64_sal_os_state+8 on MCA or INIT stack + ;; + mov regs=temp1 // save the start of sos + st8 [temp1]=r1,16 // os_gp + st8 [temp2]=r8,16 // pal_proc + ;; + st8 [temp1]=r9,16 // sal_proc + st8 [temp2]=r11,16 // rv_rc + mov r11=cr.iipa + ;; + st8 [temp1]=r18,16 // proc_state_param + st8 [temp2]=r19,16 // monarch + mov r6=IA64_KR(CURRENT) + ;; + st8 [temp1]=r12,16 // sal_ra + st8 [temp2]=r10,16 // sal_gp + mov r12=cr.isr + ;; + st8 [temp1]=r17,16 // pal_min_state + st8 [temp2]=r6,16 // prev_IA64_KR_CURRENT + mov r6=cr.ifa + ;; + st8 [temp1]=r0,16 // prev_task, starts off as NULL + st8 [temp2]=r12,16 // cr.isr + mov r12=cr.itir + ;; + st8 [temp1]=r6,16 // cr.ifa + st8 [temp2]=r12,16 // cr.itir + mov r12=cr.iim + ;; + st8 [temp1]=r11,16 // cr.iipa + st8 [temp2]=r12,16 // cr.iim + mov r6=cr.iha +(p1) mov r12=IA64_MCA_COLD_BOOT +(p2) mov r12=IA64_INIT_WARM_BOOT + ;; + st8 [temp1]=r6,16 // cr.iha + st8 [temp2]=r12 // os_status, default is cold boot + mov r6=IA64_MCA_SAME_CONTEXT + ;; + st8 [temp1]=r6 // context, default is same context + + // Save the pt_regs data that is not in minstate. The previous code + // left regs at sos. + add regs=MCA_PT_REGS_OFFSET-MCA_SOS_OFFSET, regs + ;; + add temp1=PT(B6), regs + mov temp3=b6 + mov temp4=b7 + add temp2=PT(B7), regs + ;; + st8 [temp1]=temp3,PT(AR_CSD)-PT(B6) // save b6 + st8 [temp2]=temp4,PT(AR_SSD)-PT(B7) // save b7 + mov temp3=ar.csd + mov temp4=ar.ssd + cover // must be last in group ;; - add r2 = IA64_MCA_CPU_PROC_STATE_DUMP_OFFSET, r2 - ;; -// save ar.NaT - mov r5=ar.unat // ar.unat - -// save banked GRs 16-31 along with NaT bits - bsw.1;; - st8.spill [r2]=r16,8;; - st8.spill [r2]=r17,8;; - st8.spill [r2]=r18,8;; - st8.spill [r2]=r19,8;; - st8.spill [r2]=r20,8;; - st8.spill [r2]=r21,8;; - st8.spill [r2]=r22,8;; - st8.spill [r2]=r23,8;; - st8.spill [r2]=r24,8;; - st8.spill [r2]=r25,8;; - st8.spill [r2]=r26,8;; - st8.spill [r2]=r27,8;; - st8.spill [r2]=r28,8;; - st8.spill [r2]=r29,8;; - st8.spill [r2]=r30,8;; - st8.spill [r2]=r31,8;; - - mov r4=ar.unat;; - st8 [r2]=r4,8 // save User NaT bits for r16-r31 - mov ar.unat=r5 // restore original unat - bsw.0;; - -//save BRs - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2 // duplicate r2 in r4 - - mov r3=b0 - mov r5=b1 - mov r7=b2;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=b3 - mov r5=b4 - mov r7=b5;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=b6 - mov r5=b7;; - st8 [r2]=r3,2*8 - st8 [r4]=r5,2*8;; - -cSaveCRs: -// save CRs - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2 // duplicate r2 in r4 - - mov r3=cr.dcr - mov r5=cr.itm - mov r7=cr.iva;; - - st8 [r2]=r3,8*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; // 48 byte rements - - mov r3=cr.pta;; - st8 [r2]=r3,8*8;; // 64 byte rements - -// if PSR.ic=0, reading interruption registers causes an illegal operation fault - mov r3=psr;; - tbit.nz.unc p6,p0=r3,PSR_IC;; // PSI Valid Log bit pos. test -(p6) st8 [r2]=r0,9*8+160 // increment by 232 byte inc. -begin_skip_intr_regs: -(p6) br SkipIntrRegs;; - - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2 // duplicate r2 in r6 - - mov r3=cr.ipsr - mov r5=cr.isr - mov r7=r0;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=cr.iip - mov r5=cr.ifa - mov r7=cr.itir;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=cr.iipa - mov r5=cr.ifs - mov r7=cr.iim;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=cr25;; // cr.iha - st8 [r2]=r3,160;; // 160 byte rement - -SkipIntrRegs: - st8 [r2]=r0,152;; // another 152 byte . - - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2 // duplicate r2 in r6 - - mov r3=cr.lid -// mov r5=cr.ivr // cr.ivr, don't read it - mov r7=cr.tpr;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=r0 // cr.eoi => cr67 - mov r5=r0 // cr.irr0 => cr68 - mov r7=r0;; // cr.irr1 => cr69 - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=r0 // cr.irr2 => cr70 - mov r5=r0 // cr.irr3 => cr71 - mov r7=cr.itv;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=cr.pmv - mov r5=cr.cmcv;; - st8 [r2]=r3,7*8 - st8 [r4]=r5,7*8;; - - mov r3=r0 // cr.lrr0 => cr80 - mov r5=r0;; // cr.lrr1 => cr81 - st8 [r2]=r3,23*8 - st8 [r4]=r5,23*8;; - - adds r2=25*8,r2;; - -cSaveARs: -// save ARs - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2 // duplicate r2 in r6 - - mov r3=ar.k0 - mov r5=ar.k1 - mov r7=ar.k2;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=ar.k3 - mov r5=ar.k4 - mov r7=ar.k5;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=ar.k6 - mov r5=ar.k7 - mov r7=r0;; // ar.kr8 - st8 [r2]=r3,10*8 - st8 [r4]=r5,10*8 - st8 [r6]=r7,10*8;; // rement by 72 bytes - - mov r3=ar.rsc - mov ar.rsc=r0 // put RSE in enforced lazy mode - mov r5=ar.bsp - ;; - mov r7=ar.bspstore;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=ar.rnat;; - st8 [r2]=r3,8*13 // increment by 13x8 bytes - - mov r3=ar.ccv;; - st8 [r2]=r3,8*4 - - mov r3=ar.unat;; - st8 [r2]=r3,8*4 - - mov r3=ar.fpsr;; - st8 [r2]=r3,8*4 - - mov r3=ar.itc;; - st8 [r2]=r3,160 // 160 - - mov r3=ar.pfs;; - st8 [r2]=r3,8 - - mov r3=ar.lc;; - st8 [r2]=r3,8 - - mov r3=ar.ec;; - st8 [r2]=r3 - add r2=8*62,r2 //padding - -// save RRs - mov ar.lc=0x08-1 - movl r4=0x00;; - -cStRR: - dep.z r5=r4,61,3;; - mov r3=rr[r5];; - st8 [r2]=r3,8 - add r4=1,r4 - br.cloop.sptk.few cStRR - ;; -end_os_mca_dump: - br ia64_os_mca_done_dump;; + st8 [temp1]=temp3,PT(AR_UNAT)-PT(AR_CSD) // save ar.csd + st8 [temp2]=temp4,PT(AR_PFS)-PT(AR_SSD) // save ar.ssd + mov temp3=ar.unat + mov temp4=ar.pfs + ;; + st8 [temp1]=temp3,PT(AR_RNAT)-PT(AR_UNAT) // save ar.unat + st8 [temp2]=temp4,PT(AR_BSPSTORE)-PT(AR_PFS) // save ar.pfs + mov temp3=ar.rnat + mov temp4=ar.bspstore + ;; + st8 [temp1]=temp3,PT(LOADRS)-PT(AR_RNAT) // save ar.rnat + st8 [temp2]=temp4,PT(AR_FPSR)-PT(AR_BSPSTORE) // save ar.bspstore + mov temp3=ar.bsp + ;; + sub temp3=temp3, temp4 // ar.bsp - ar.bspstore + mov temp4=ar.fpsr + ;; + shl temp3=temp3,16 // compute ar.rsc to be used for "loadrs" + ;; + st8 [temp1]=temp3,PT(AR_CCV)-PT(LOADRS) // save loadrs + st8 [temp2]=temp4,PT(F6)-PT(AR_FPSR) // save ar.fpsr + mov temp3=ar.ccv + ;; + st8 [temp1]=temp3,PT(F7)-PT(AR_CCV) // save ar.ccv + stf.spill [temp2]=f6,PT(F8)-PT(F6) + ;; + stf.spill [temp1]=f7,PT(F9)-PT(F7) + stf.spill [temp2]=f8,PT(F10)-PT(F8) + ;; + stf.spill [temp1]=f9,PT(F11)-PT(F9) + stf.spill [temp2]=f10 + ;; + stf.spill [temp1]=f11 + + // Save the switch_stack data that is not in minstate nor pt_regs. The + // previous code left regs at pt_regs. + add regs=MCA_SWITCH_STACK_OFFSET-MCA_PT_REGS_OFFSET, regs + ;; + add temp1=SW(F2), regs + add temp2=SW(F3), regs + ;; + stf.spill [temp1]=f2,32 + stf.spill [temp2]=f3,32 + ;; + stf.spill [temp1]=f4,32 + stf.spill [temp2]=f5,32 + ;; + stf.spill [temp1]=f12,32 + stf.spill [temp2]=f13,32 + ;; + stf.spill [temp1]=f14,32 + stf.spill [temp2]=f15,32 + ;; + stf.spill [temp1]=f16,32 + stf.spill [temp2]=f17,32 + ;; + stf.spill [temp1]=f18,32 + stf.spill [temp2]=f19,32 + ;; + stf.spill [temp1]=f20,32 + stf.spill [temp2]=f21,32 + ;; + stf.spill [temp1]=f22,32 + stf.spill [temp2]=f23,32 + ;; + stf.spill [temp1]=f24,32 + stf.spill [temp2]=f25,32 + ;; + stf.spill [temp1]=f26,32 + stf.spill [temp2]=f27,32 + ;; + stf.spill [temp1]=f28,32 + stf.spill [temp2]=f29,32 + ;; + stf.spill [temp1]=f30,SW(B2)-SW(F30) + stf.spill [temp2]=f31,SW(B3)-SW(F31) + mov temp3=b2 + mov temp4=b3 + ;; + st8 [temp1]=temp3,16 // save b2 + st8 [temp2]=temp4,16 // save b3 + mov temp3=b4 + mov temp4=b5 + ;; + st8 [temp1]=temp3,SW(AR_LC)-SW(B4) // save b4 + st8 [temp2]=temp4 // save b5 + mov temp3=ar.lc + ;; + st8 [temp1]=temp3 // save ar.lc + + // FIXME: Some proms are incorrectly accessing the minstate area as + // cached data. The C code uses region 6, uncached virtual. Ensure + // that there is no cache data lying around for the first 1K of the + // minstate area. + // Remove this code in September 2006, that gives platforms a year to + // fix their proms and get their customers updated. + + add r1=32*1,r17 + add r2=32*2,r17 + add r3=32*3,r17 + add r4=32*4,r17 + add r5=32*5,r17 + add r6=32*6,r17 + add r7=32*7,r17 + ;; + fc r17 + fc r1 + fc r2 + fc r3 + fc r4 + fc r5 + fc r6 + fc r7 + add r17=32*8,r17 + add r1=32*8,r1 + add r2=32*8,r2 + add r3=32*8,r3 + add r4=32*8,r4 + add r5=32*8,r5 + add r6=32*8,r6 + add r7=32*8,r7 + ;; + fc r17 + fc r1 + fc r2 + fc r3 + fc r4 + fc r5 + fc r6 + fc r7 + add r17=32*8,r17 + add r1=32*8,r1 + add r2=32*8,r2 + add r3=32*8,r3 + add r4=32*8,r4 + add r5=32*8,r5 + add r6=32*8,r6 + add r7=32*8,r7 + ;; + fc r17 + fc r1 + fc r2 + fc r3 + fc r4 + fc r5 + fc r6 + fc r7 + add r17=32*8,r17 + add r1=32*8,r1 + add r2=32*8,r2 + add r3=32*8,r3 + add r4=32*8,r4 + add r5=32*8,r5 + add r6=32*8,r6 + add r7=32*8,r7 + ;; + fc r17 + fc r1 + fc r2 + fc r3 + fc r4 + fc r5 + fc r6 + fc r7 + + br.sptk b0 //EndStub////////////////////////////////////////////////////////////////////// //++ // Name: -// ia64_os_mca_proc_state_restore() +// ia64_state_restore() // // Stub Description: // -// This is a stub to restore the saved processor state during MCHK +// Restore the SAL/OS state. This is sensitive to the layout of struct +// ia64_sal_os_state in mca.h. +// +// r2 contains the return address, r3 contains either +// IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET. +// +// In addition to the SAL to OS state, this routine restores all the +// registers that appear in struct pt_regs and struct switch_stack, +// excluding those in the PAL minstate area. // //-- -ia64_os_mca_proc_state_restore: +ia64_state_restore: + // Restore the switch_stack data that is not in minstate nor pt_regs. + add regs=MCA_SWITCH_STACK_OFFSET, r3 + mov b0=r2 // save return address + ;; + GET_IA64_MCA_DATA(temp2) + ;; + add regs=temp2, regs + ;; + add temp1=SW(F2), regs + add temp2=SW(F3), regs + ;; + ldf.fill f2=[temp1],32 + ldf.fill f3=[temp2],32 + ;; + ldf.fill f4=[temp1],32 + ldf.fill f5=[temp2],32 + ;; + ldf.fill f12=[temp1],32 + ldf.fill f13=[temp2],32 + ;; + ldf.fill f14=[temp1],32 + ldf.fill f15=[temp2],32 + ;; + ldf.fill f16=[temp1],32 + ldf.fill f17=[temp2],32 + ;; + ldf.fill f18=[temp1],32 + ldf.fill f19=[temp2],32 + ;; + ldf.fill f20=[temp1],32 + ldf.fill f21=[temp2],32 + ;; + ldf.fill f22=[temp1],32 + ldf.fill f23=[temp2],32 + ;; + ldf.fill f24=[temp1],32 + ldf.fill f25=[temp2],32 + ;; + ldf.fill f26=[temp1],32 + ldf.fill f27=[temp2],32 + ;; + ldf.fill f28=[temp1],32 + ldf.fill f29=[temp2],32 + ;; + ldf.fill f30=[temp1],SW(B2)-SW(F30) + ldf.fill f31=[temp2],SW(B3)-SW(F31) + ;; + ld8 temp3=[temp1],16 // restore b2 + ld8 temp4=[temp2],16 // restore b3 + ;; + mov b2=temp3 + mov b3=temp4 + ld8 temp3=[temp1],SW(AR_LC)-SW(B4) // restore b4 + ld8 temp4=[temp2] // restore b5 + ;; + mov b4=temp3 + mov b5=temp4 + ld8 temp3=[temp1] // restore ar.lc + ;; + mov ar.lc=temp3 -// Restore bank1 GR16-31 - GET_IA64_MCA_DATA(r2) + // Restore the pt_regs data that is not in minstate. The previous code + // left regs at switch_stack. + add regs=MCA_PT_REGS_OFFSET-MCA_SWITCH_STACK_OFFSET, regs + ;; + add temp1=PT(B6), regs + add temp2=PT(B7), regs + ;; + ld8 temp3=[temp1],PT(AR_CSD)-PT(B6) // restore b6 + ld8 temp4=[temp2],PT(AR_SSD)-PT(B7) // restore b7 + ;; + mov b6=temp3 + mov b7=temp4 + ld8 temp3=[temp1],PT(AR_UNAT)-PT(AR_CSD) // restore ar.csd + ld8 temp4=[temp2],PT(AR_PFS)-PT(AR_SSD) // restore ar.ssd + ;; + mov ar.csd=temp3 + mov ar.ssd=temp4 + ld8 temp3=[temp1] // restore ar.unat + add temp1=PT(AR_CCV)-PT(AR_UNAT), temp1 + ld8 temp4=[temp2],PT(AR_FPSR)-PT(AR_PFS) // restore ar.pfs + ;; + mov ar.unat=temp3 + mov ar.pfs=temp4 + // ar.rnat, ar.bspstore, loadrs are restore in ia64_old_stack. + ld8 temp3=[temp1],PT(F6)-PT(AR_CCV) // restore ar.ccv + ld8 temp4=[temp2],PT(F7)-PT(AR_FPSR) // restore ar.fpsr + ;; + mov ar.ccv=temp3 + mov ar.fpsr=temp4 + ldf.fill f6=[temp1],PT(F8)-PT(F6) + ldf.fill f7=[temp2],PT(F9)-PT(F7) + ;; + ldf.fill f8=[temp1],PT(F10)-PT(F8) + ldf.fill f9=[temp2],PT(F11)-PT(F9) + ;; + ldf.fill f10=[temp1] + ldf.fill f11=[temp2] + + // Restore the SAL to OS state. The previous code left regs at pt_regs. + add regs=MCA_SOS_OFFSET-MCA_PT_REGS_OFFSET, regs ;; - add r2 = IA64_MCA_CPU_PROC_STATE_DUMP_OFFSET, r2 - -restore_GRs: // restore bank-1 GRs 16-31 - bsw.1;; - add r3=16*8,r2;; // to get to NaT of GR 16-31 - ld8 r3=[r3];; - mov ar.unat=r3;; // first restore NaT - - ld8.fill r16=[r2],8;; - ld8.fill r17=[r2],8;; - ld8.fill r18=[r2],8;; - ld8.fill r19=[r2],8;; - ld8.fill r20=[r2],8;; - ld8.fill r21=[r2],8;; - ld8.fill r22=[r2],8;; - ld8.fill r23=[r2],8;; - ld8.fill r24=[r2],8;; - ld8.fill r25=[r2],8;; - ld8.fill r26=[r2],8;; - ld8.fill r27=[r2],8;; - ld8.fill r28=[r2],8;; - ld8.fill r29=[r2],8;; - ld8.fill r30=[r2],8;; - ld8.fill r31=[r2],8;; - - ld8 r3=[r2],8;; // increment to skip NaT - bsw.0;; - -restore_BRs: - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2;; // duplicate r2 in r4 - - ld8 r3=[r2],3*8 - ld8 r5=[r4],3*8 - ld8 r7=[r6],3*8;; - mov b0=r3 - mov b1=r5 - mov b2=r7;; - - ld8 r3=[r2],3*8 - ld8 r5=[r4],3*8 - ld8 r7=[r6],3*8;; - mov b3=r3 - mov b4=r5 - mov b5=r7;; - - ld8 r3=[r2],2*8 - ld8 r5=[r4],2*8;; - mov b6=r3 - mov b7=r5;; - -restore_CRs: - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2;; // duplicate r2 in r4 - - ld8 r3=[r2],8*8 - ld8 r5=[r4],3*8 - ld8 r7=[r6],3*8;; // 48 byte increments - mov cr.dcr=r3 - mov cr.itm=r5 - mov cr.iva=r7;; - - ld8 r3=[r2],8*8;; // 64 byte increments -// mov cr.pta=r3 - - -// if PSR.ic=1, reading interruption registers causes an illegal operation fault - mov r3=psr;; - tbit.nz.unc p6,p0=r3,PSR_IC;; // PSI Valid Log bit pos. test -(p6) st8 [r2]=r0,9*8+160 // increment by 232 byte inc. - -begin_rskip_intr_regs: -(p6) br rSkipIntrRegs;; - - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2;; // duplicate r2 in r4 - - ld8 r3=[r2],3*8 - ld8 r5=[r4],3*8 - ld8 r7=[r6],3*8;; - mov cr.ipsr=r3 -// mov cr.isr=r5 // cr.isr is read only - - ld8 r3=[r2],3*8 - ld8 r5=[r4],3*8 - ld8 r7=[r6],3*8;; - mov cr.iip=r3 - mov cr.ifa=r5 - mov cr.itir=r7;; - - ld8 r3=[r2],3*8 - ld8 r5=[r4],3*8 - ld8 r7=[r6],3*8;; - mov cr.iipa=r3 - mov cr.ifs=r5 - mov cr.iim=r7 - - ld8 r3=[r2],160;; // 160 byte increment - mov cr.iha=r3 - -rSkipIntrRegs: - ld8 r3=[r2],152;; // another 152 byte inc. - - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2;; // duplicate r2 in r6 - - ld8 r3=[r2],8*3 - ld8 r5=[r4],8*3 - ld8 r7=[r6],8*3;; - mov cr.lid=r3 -// mov cr.ivr=r5 // cr.ivr is read only - mov cr.tpr=r7;; - - ld8 r3=[r2],8*3 - ld8 r5=[r4],8*3 - ld8 r7=[r6],8*3;; -// mov cr.eoi=r3 -// mov cr.irr0=r5 // cr.irr0 is read only -// mov cr.irr1=r7;; // cr.irr1 is read only - - ld8 r3=[r2],8*3 - ld8 r5=[r4],8*3 - ld8 r7=[r6],8*3;; -// mov cr.irr2=r3 // cr.irr2 is read only -// mov cr.irr3=r5 // cr.irr3 is read only - mov cr.itv=r7;; - - ld8 r3=[r2],8*7 - ld8 r5=[r4],8*7;; - mov cr.pmv=r3 - mov cr.cmcv=r5;; - - ld8 r3=[r2],8*23 - ld8 r5=[r4],8*23;; - adds r2=8*23,r2 - adds r4=8*23,r4;; -// mov cr.lrr0=r3 -// mov cr.lrr1=r5 - - adds r2=8*2,r2;; - -restore_ARs: - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2;; // duplicate r2 in r4 - - ld8 r3=[r2],3*8 - ld8 r5=[r4],3*8 - ld8 r7=[r6],3*8;; - mov ar.k0=r3 - mov ar.k1=r5 - mov ar.k2=r7;; - - ld8 r3=[r2],3*8 - ld8 r5=[r4],3*8 - ld8 r7=[r6],3*8;; - mov ar.k3=r3 - mov ar.k4=r5 - mov ar.k5=r7;; - - ld8 r3=[r2],10*8 - ld8 r5=[r4],10*8 - ld8 r7=[r6],10*8;; - mov ar.k6=r3 - mov ar.k7=r5 - ;; - - ld8 r3=[r2],3*8 - ld8 r5=[r4],3*8 - ld8 r7=[r6],3*8;; -// mov ar.rsc=r3 -// mov ar.bsp=r5 // ar.bsp is read only - mov ar.rsc=r0 // make sure that RSE is in enforced lazy mode - ;; - mov ar.bspstore=r7;; - - ld8 r9=[r2],8*13;; - mov ar.rnat=r9 - - mov ar.rsc=r3 - ld8 r3=[r2],8*4;; - mov ar.ccv=r3 - - ld8 r3=[r2],8*4;; - mov ar.unat=r3 - - ld8 r3=[r2],8*4;; - mov ar.fpsr=r3 - - ld8 r3=[r2],160;; // 160 -// mov ar.itc=r3 - - ld8 r3=[r2],8;; - mov ar.pfs=r3 - - ld8 r3=[r2],8;; - mov ar.lc=r3 - - ld8 r3=[r2];; - mov ar.ec=r3 - add r2=8*62,r2;; // padding - -restore_RRs: - mov r5=ar.lc - mov ar.lc=0x08-1 - movl r4=0x00;; -cStRRr: - dep.z r7=r4,61,3 - ld8 r3=[r2],8;; - mov rr[r7]=r3 // what are its access previledges? - add r4=1,r4 - br.cloop.sptk.few cStRRr - ;; - mov ar.lc=r5 - ;; -end_os_mca_restore: - br ia64_os_mca_done_restore;; + add temp1=IA64_SAL_OS_STATE_COMMON_OFFSET, regs + add temp2=IA64_SAL_OS_STATE_COMMON_OFFSET+8, regs + ;; + ld8 r12=[temp1],16 // sal_ra + ld8 r9=[temp2],16 // sal_gp + ;; + ld8 r22=[temp1],24 // pal_min_state, virtual. skip prev_task + ld8 r21=[temp2],16 // prev_IA64_KR_CURRENT + ;; + ld8 temp3=[temp1],16 // cr.isr + ld8 temp4=[temp2],16 // cr.ifa + ;; + mov cr.isr=temp3 + mov cr.ifa=temp4 + ld8 temp3=[temp1],16 // cr.itir + ld8 temp4=[temp2],16 // cr.iipa + ;; + mov cr.itir=temp3 + mov cr.iipa=temp4 + ld8 temp3=[temp1],16 // cr.iim + ld8 temp4=[temp2],16 // cr.iha + ;; + mov cr.iim=temp3 + mov cr.iha=temp4 + dep r22=0,r22,62,2 // pal_min_state, physical, uncached + mov IA64_KR(CURRENT)=r21 + ld8 r8=[temp1] // os_status + ld8 r10=[temp2] // context + + br.sptk b0 //EndStub////////////////////////////////////////////////////////////////////// -// ok, the issue here is that we need to save state information so -// it can be useable by the kernel debugger and show regs routines. -// In order to do this, our best bet is save the current state (plus -// the state information obtain from the MIN_STATE_AREA) into a pt_regs -// format. This way we can pass it on in a useable format. +//++ +// Name: +// ia64_new_stack() // - +// Stub Description: // -// SAL to OS entry point for INIT on the monarch processor -// This has been defined for registration purposes with SAL -// as a part of ia64_mca_init. +// Switch to the MCA/INIT stack. // -// When we get here, the following registers have been -// set by the SAL for our use +// r2 contains the return address, r3 contains either +// IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET. // -// 1. GR1 = OS INIT GP -// 2. GR8 = PAL_PROC physical address -// 3. GR9 = SAL_PROC physical address -// 4. GR10 = SAL GP (physical) -// 5. GR11 = Init Reason -// 0 = Received INIT for event other than crash dump switch -// 1 = Received wakeup at the end of an OS_MCA corrected machine check -// 2 = Received INIT dude to CrashDump switch assertion +// On entry RBS is still on the original stack, this routine switches RBS +// to use the MCA/INIT stack. // -// 6. GR12 = Return address to location within SAL_INIT procedure - +// On entry, sos->pal_min_state is physical, on exit it is virtual. +// +//-- -GLOBAL_ENTRY(ia64_monarch_init_handler) - .prologue - // stash the information the SAL passed to os - SAL_TO_OS_MCA_HANDOFF_STATE_SAVE(r2) +ia64_new_stack: + add regs=MCA_PT_REGS_OFFSET, r3 + add temp2=MCA_SOS_OFFSET+IA64_SAL_OS_STATE_PAL_MIN_STATE_OFFSET, r3 + mov b0=r2 // save return address + GET_IA64_MCA_DATA(temp1) + invala ;; - SAVE_MIN_WITH_COVER + add temp2=temp2, temp1 // struct ia64_sal_os_state.pal_min_state on MCA or INIT stack + add regs=regs, temp1 // struct pt_regs on MCA or INIT stack ;; - mov r8=cr.ifa - mov r9=cr.isr - adds r3=8,r2 // set up second base pointer + // Address of minstate area provided by PAL is physical, uncacheable. + // Convert to Linux virtual address in region 6 for C code. + ld8 ms=[temp2] // pal_min_state, physical ;; - SAVE_REST - -// ok, enough should be saved at this point to be dangerous, and supply -// information for a dump -// We need to switch to Virtual mode before hitting the C functions. + dep temp1=-1,ms,62,2 // set region 6 + mov temp3=IA64_RBS_OFFSET-MCA_PT_REGS_OFFSET + ;; + st8 [temp2]=temp1 // pal_min_state, virtual - movl r2=IA64_PSR_IT|IA64_PSR_IC|IA64_PSR_DT|IA64_PSR_RT|IA64_PSR_DFH|IA64_PSR_BN - mov r3=psr // get the current psr, minimum enabled at this point + add temp4=temp3, regs // start of bspstore on new stack ;; - or r2=r2,r3 + mov ar.bspstore=temp4 // switch RBS to MCA/INIT stack ;; - movl r3=IVirtual_Switch + flushrs // must be first in group + br.sptk b0 + +//EndStub////////////////////////////////////////////////////////////////////// + + +//++ +// Name: +// ia64_old_stack() +// +// Stub Description: +// +// Switch to the old stack. +// +// r2 contains the return address, r3 contains either +// IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET. +// +// On entry, pal_min_state is virtual, on exit it is physical. +// +// On entry RBS is on the MCA/INIT stack, this routine switches RBS +// back to the previous stack. +// +// The psr is set to all zeroes. SAL return requires either all zeroes or +// just psr.mc set. Leaving psr.mc off allows INIT to be issued if this +// code does not perform correctly. +// +// The dirty registers at the time of the event were flushed to the +// MCA/INIT stack in ia64_pt_regs_save(). Restore the dirty registers +// before reverting to the previous bspstore. +//-- + +ia64_old_stack: + add regs=MCA_PT_REGS_OFFSET, r3 + mov b0=r2 // save return address + GET_IA64_MCA_DATA(temp2) + LOAD_PHYSICAL(p0,temp1,1f) ;; - mov cr.iip=r3 // short return to set the appropriate bits - mov cr.ipsr=r2 // need to do an rfi to set appropriate bits + mov cr.ipsr=r0 + mov cr.ifs=r0 + mov cr.iip=temp1 ;; + invala rfi +1: + + add regs=regs, temp2 // struct pt_regs on MCA or INIT stack ;; -IVirtual_Switch: - // - // We should now be running virtual - // - // Let's call the C handler to get the rest of the state info - // - alloc r14=ar.pfs,0,0,2,0 // now it's safe (must be first in insn group!) + add temp1=PT(LOADRS), regs ;; - adds out0=16,sp // out0 = pointer to pt_regs + ld8 temp2=[temp1],PT(AR_BSPSTORE)-PT(LOADRS) // restore loadrs ;; - DO_SAVE_SWITCH_STACK - .body - adds out1=16,sp // out0 = pointer to switch_stack + ld8 temp3=[temp1],PT(AR_RNAT)-PT(AR_BSPSTORE) // restore ar.bspstore + mov ar.rsc=temp2 + ;; + loadrs + ld8 temp4=[temp1] // restore ar.rnat + ;; + mov ar.bspstore=temp3 // back to old stack + ;; + mov ar.rnat=temp4 + ;; + + br.sptk b0 - br.call.sptk.many rp=ia64_init_handler -.ret1: +//EndStub////////////////////////////////////////////////////////////////////// -return_from_init: - br.sptk return_from_init -END(ia64_monarch_init_handler) +//++ +// Name: +// ia64_set_kernel_registers() // -// SAL to OS entry point for INIT on the slave processor -// This has been defined for registration purposes with SAL -// as a part of ia64_mca_init. +// Stub Description: +// +// Set the registers that are required by the C code in order to run on an +// MCA/INIT stack. +// +// r2 contains the return address, r3 contains either +// IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET. // +//-- + +ia64_set_kernel_registers: + add temp3=MCA_SP_OFFSET, r3 + add temp4=MCA_SOS_OFFSET+IA64_SAL_OS_STATE_OS_GP_OFFSET, r3 + mov b0=r2 // save return address + GET_IA64_MCA_DATA(temp1) + ;; + add temp4=temp4, temp1 // &struct ia64_sal_os_state.os_gp + add r12=temp1, temp3 // kernel stack pointer on MCA/INIT stack + add r13=temp1, r3 // set current to start of MCA/INIT stack + ;; + ld8 r1=[temp4] // OS GP from SAL OS state + ;; + DATA_PA_TO_VA(r1,temp1) + DATA_PA_TO_VA(r12,temp2) + DATA_PA_TO_VA(r13,temp3) + ;; + mov IA64_KR(CURRENT)=r13 + + // FIXME: do I need to wire IA64_KR_CURRENT_STACK and IA64_TR_CURRENT_STACK? + + br.sptk b0 + +//EndStub////////////////////////////////////////////////////////////////////// + +#undef ms +#undef regs +#undef temp1 +#undef temp2 +#undef temp3 +#undef temp4 + -GLOBAL_ENTRY(ia64_slave_init_handler) -1: br.sptk 1b -END(ia64_slave_init_handler) +// Support function for mca.c, it is here to avoid using inline asm. Given the +// address of an rnat slot, if that address is below the current ar.bspstore +// then return the contents of that slot, otherwise return the contents of +// ar.rnat. +GLOBAL_ENTRY(ia64_get_rnat) + alloc r14=ar.pfs,1,0,0,0 + mov ar.rsc=0 + ;; + mov r14=ar.bspstore + ;; + cmp.lt p6,p7=in0,r14 + ;; +(p6) ld8 r8=[in0] +(p7) mov r8=ar.rnat + mov ar.rsc=3 + br.ret.sptk.many rp +END(ia64_get_rnat) diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c index abc0113a821d..6e683745af49 100644 --- a/arch/ia64/kernel/mca_drv.c +++ b/arch/ia64/kernel/mca_drv.c @@ -4,6 +4,8 @@ * * Copyright (C) 2004 FUJITSU LIMITED * Copyright (C) Hidetoshi Seto (seto.hidetoshi@jp.fujitsu.com) + * Copyright (C) 2005 Silicon Graphics, Inc + * Copyright (C) 2005 Keith Owens <kaos@sgi.com> */ #include <linux/config.h> #include <linux/types.h> @@ -38,10 +40,6 @@ /* max size of SAL error record (default) */ static int sal_rec_max = 10000; -/* from mca.c */ -static ia64_mca_sal_to_os_state_t *sal_to_os_handoff_state; -static ia64_mca_os_to_sal_state_t *os_to_sal_handoff_state; - /* from mca_drv_asm.S */ extern void *mca_handler_bhhook(void); @@ -316,7 +314,8 @@ init_record_index_pools(void) */ static mca_type_t -is_mca_global(peidx_table_t *peidx, pal_bus_check_info_t *pbci) +is_mca_global(peidx_table_t *peidx, pal_bus_check_info_t *pbci, + struct ia64_sal_os_state *sos) { pal_processor_state_info_t *psp = (pal_processor_state_info_t*)peidx_psp(peidx); @@ -327,7 +326,7 @@ is_mca_global(peidx_table_t *peidx, pal_bus_check_info_t *pbci) * Therefore it is local MCA when rendezvous has not been requested. * Failed to rendezvous, the system must be down. */ - switch (sal_to_os_handoff_state->imsto_rendez_state) { + switch (sos->rv_rc) { case -1: /* SAL rendezvous unsuccessful */ return MCA_IS_GLOBAL; case 0: /* SAL rendezvous not required */ @@ -388,7 +387,8 @@ is_mca_global(peidx_table_t *peidx, pal_bus_check_info_t *pbci) */ static int -recover_from_read_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci) +recover_from_read_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci, + struct ia64_sal_os_state *sos) { sal_log_mod_error_info_t *smei; pal_min_state_area_t *pmsa; @@ -426,7 +426,7 @@ recover_from_read_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_chec * setup for resume to bottom half of MCA, * "mca_handler_bhhook" */ - pmsa = (pal_min_state_area_t *)(sal_to_os_handoff_state->pal_min_state | (6ul<<61)); + pmsa = sos->pal_min_state; /* pass to bhhook as 1st argument (gr8) */ pmsa->pmsa_gr[8-1] = smei->target_identifier; /* set interrupted return address (but no use) */ @@ -459,7 +459,8 @@ recover_from_read_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_chec */ static int -recover_from_platform_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci) +recover_from_platform_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci, + struct ia64_sal_os_state *sos) { int status = 0; pal_processor_state_info_t *psp = (pal_processor_state_info_t*)peidx_psp(peidx); @@ -469,7 +470,7 @@ recover_from_platform_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_ case 1: /* partial read */ case 3: /* full line(cpu) read */ case 9: /* I/O space read */ - status = recover_from_read_error(slidx, peidx, pbci); + status = recover_from_read_error(slidx, peidx, pbci, sos); break; case 0: /* unknown */ case 2: /* partial write */ @@ -508,7 +509,8 @@ recover_from_platform_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_ */ static int -recover_from_processor_error(int platform, slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci) +recover_from_processor_error(int platform, slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci, + struct ia64_sal_os_state *sos) { pal_processor_state_info_t *psp = (pal_processor_state_info_t*)peidx_psp(peidx); @@ -545,7 +547,7 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, peidx_table_t * * This means "there are some platform errors". */ if (platform) - return recover_from_platform_error(slidx, peidx, pbci); + return recover_from_platform_error(slidx, peidx, pbci, sos); /* * On account of strange SAL error record, we cannot recover. */ @@ -562,8 +564,7 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, peidx_table_t * static int mca_try_to_recover(void *rec, - ia64_mca_sal_to_os_state_t *sal_to_os_state, - ia64_mca_os_to_sal_state_t *os_to_sal_state) + struct ia64_sal_os_state *sos) { int platform_err; int n_proc_err; @@ -571,10 +572,6 @@ mca_try_to_recover(void *rec, peidx_table_t peidx; pal_bus_check_info_t pbci; - /* handoff state from/to mca.c */ - sal_to_os_handoff_state = sal_to_os_state; - os_to_sal_handoff_state = os_to_sal_state; - /* Make index of SAL error record */ platform_err = mca_make_slidx(rec, &slidx); @@ -597,11 +594,11 @@ mca_try_to_recover(void *rec, *((u64*)&pbci) = peidx_check_info(&peidx, bus_check, 0); /* Check whether MCA is global or not */ - if (is_mca_global(&peidx, &pbci)) + if (is_mca_global(&peidx, &pbci, sos)) return 0; /* Try to recover a processor error */ - return recover_from_processor_error(platform_err, &slidx, &peidx, &pbci); + return recover_from_processor_error(platform_err, &slidx, &peidx, &pbci, sos); } /* diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h index f6d8a010d99b..85ed54179afa 100644 --- a/arch/ia64/kernel/minstate.h +++ b/arch/ia64/kernel/minstate.h @@ -5,73 +5,6 @@ #include "entry.h" /* - * For ivt.s we want to access the stack virtually so we don't have to disable translation - * on interrupts. - * - * On entry: - * r1: pointer to current task (ar.k6) - */ -#define MINSTATE_START_SAVE_MIN_VIRT \ -(pUStk) mov ar.rsc=0; /* set enforced lazy mode, pl 0, little-endian, loadrs=0 */ \ - ;; \ -(pUStk) mov.m r24=ar.rnat; \ -(pUStk) addl r22=IA64_RBS_OFFSET,r1; /* compute base of RBS */ \ -(pKStk) mov r1=sp; /* get sp */ \ - ;; \ -(pUStk) lfetch.fault.excl.nt1 [r22]; \ -(pUStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1; /* compute base of memory stack */ \ -(pUStk) mov r23=ar.bspstore; /* save ar.bspstore */ \ - ;; \ -(pUStk) mov ar.bspstore=r22; /* switch to kernel RBS */ \ -(pKStk) addl r1=-IA64_PT_REGS_SIZE,r1; /* if in kernel mode, use sp (r12) */ \ - ;; \ -(pUStk) mov r18=ar.bsp; \ -(pUStk) mov ar.rsc=0x3; /* set eager mode, pl 0, little-endian, loadrs=0 */ - -#define MINSTATE_END_SAVE_MIN_VIRT \ - bsw.1; /* switch back to bank 1 (must be last in insn group) */ \ - ;; - -/* - * For mca_asm.S we want to access the stack physically since the state is saved before we - * go virtual and don't want to destroy the iip or ipsr. - */ -#define MINSTATE_START_SAVE_MIN_PHYS \ -(pKStk) mov r3=IA64_KR(PER_CPU_DATA);; \ -(pKStk) addl r3=THIS_CPU(ia64_mca_data),r3;; \ -(pKStk) ld8 r3 = [r3];; \ -(pKStk) addl r3=IA64_MCA_CPU_INIT_STACK_OFFSET,r3;; \ -(pKStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r3; \ -(pUStk) mov ar.rsc=0; /* set enforced lazy mode, pl 0, little-endian, loadrs=0 */ \ -(pUStk) addl r22=IA64_RBS_OFFSET,r1; /* compute base of register backing store */ \ - ;; \ -(pUStk) mov r24=ar.rnat; \ -(pUStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1; /* compute base of memory stack */ \ -(pUStk) mov r23=ar.bspstore; /* save ar.bspstore */ \ -(pUStk) dep r22=-1,r22,61,3; /* compute kernel virtual addr of RBS */ \ - ;; \ -(pUStk) mov ar.bspstore=r22; /* switch to kernel RBS */ \ - ;; \ -(pUStk) mov r18=ar.bsp; \ -(pUStk) mov ar.rsc=0x3; /* set eager mode, pl 0, little-endian, loadrs=0 */ \ - -#define MINSTATE_END_SAVE_MIN_PHYS \ - dep r12=-1,r12,61,3; /* make sp a kernel virtual address */ \ - ;; - -#ifdef MINSTATE_VIRT -# define MINSTATE_GET_CURRENT(reg) mov reg=IA64_KR(CURRENT) -# define MINSTATE_START_SAVE_MIN MINSTATE_START_SAVE_MIN_VIRT -# define MINSTATE_END_SAVE_MIN MINSTATE_END_SAVE_MIN_VIRT -#endif - -#ifdef MINSTATE_PHYS -# define MINSTATE_GET_CURRENT(reg) mov reg=IA64_KR(CURRENT);; tpa reg=reg -# define MINSTATE_START_SAVE_MIN MINSTATE_START_SAVE_MIN_PHYS -# define MINSTATE_END_SAVE_MIN MINSTATE_END_SAVE_MIN_PHYS -#endif - -/* * DO_SAVE_MIN switches to the kernel stacks (if necessary) and saves * the minimum state necessary that allows us to turn psr.ic back * on. @@ -97,7 +30,7 @@ * we can pass interruption state as arguments to a handler. */ #define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA) \ - MINSTATE_GET_CURRENT(r16); /* M (or M;;I) */ \ + mov r16=IA64_KR(CURRENT); /* M */ \ mov r27=ar.rsc; /* M */ \ mov r20=r1; /* A */ \ mov r25=ar.unat; /* M */ \ @@ -118,7 +51,21 @@ SAVE_IFS; \ cmp.eq pKStk,pUStk=r0,r17; /* are we in kernel mode already? */ \ ;; \ - MINSTATE_START_SAVE_MIN \ +(pUStk) mov ar.rsc=0; /* set enforced lazy mode, pl 0, little-endian, loadrs=0 */ \ + ;; \ +(pUStk) mov.m r24=ar.rnat; \ +(pUStk) addl r22=IA64_RBS_OFFSET,r1; /* compute base of RBS */ \ +(pKStk) mov r1=sp; /* get sp */ \ + ;; \ +(pUStk) lfetch.fault.excl.nt1 [r22]; \ +(pUStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1; /* compute base of memory stack */ \ +(pUStk) mov r23=ar.bspstore; /* save ar.bspstore */ \ + ;; \ +(pUStk) mov ar.bspstore=r22; /* switch to kernel RBS */ \ +(pKStk) addl r1=-IA64_PT_REGS_SIZE,r1; /* if in kernel mode, use sp (r12) */ \ + ;; \ +(pUStk) mov r18=ar.bsp; \ +(pUStk) mov ar.rsc=0x3; /* set eager mode, pl 0, little-endian, loadrs=0 */ \ adds r17=2*L1_CACHE_BYTES,r1; /* really: biggest cache-line size */ \ adds r16=PT(CR_IPSR),r1; \ ;; \ @@ -181,7 +128,8 @@ EXTRA; \ movl r1=__gp; /* establish kernel global pointer */ \ ;; \ - MINSTATE_END_SAVE_MIN + bsw.1; /* switch back to bank 1 (must be last in insn group) */ \ + ;; /* * SAVE_REST saves the remainder of pt_regs (with psr.ic on). diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c index 25e7c8344564..89faa603c6be 100644 --- a/arch/ia64/kernel/palinfo.c +++ b/arch/ia64/kernel/palinfo.c @@ -307,11 +307,9 @@ vm_info(char *page) if ((status = ia64_pal_vm_summary(&vm_info_1, &vm_info_2)) !=0) { printk(KERN_ERR "ia64_pal_vm_summary=%ld\n", status); - return 0; - } + } else { - - p += sprintf(p, + p += sprintf(p, "Physical Address Space : %d bits\n" "Virtual Address Space : %d bits\n" "Protection Key Registers(PKR) : %d\n" @@ -319,92 +317,99 @@ vm_info(char *page) "Hash Tag ID : 0x%x\n" "Size of RR.rid : %d\n", vm_info_1.pal_vm_info_1_s.phys_add_size, - vm_info_2.pal_vm_info_2_s.impl_va_msb+1, vm_info_1.pal_vm_info_1_s.max_pkr+1, - vm_info_1.pal_vm_info_1_s.key_size, vm_info_1.pal_vm_info_1_s.hash_tag_id, + vm_info_2.pal_vm_info_2_s.impl_va_msb+1, + vm_info_1.pal_vm_info_1_s.max_pkr+1, + vm_info_1.pal_vm_info_1_s.key_size, + vm_info_1.pal_vm_info_1_s.hash_tag_id, vm_info_2.pal_vm_info_2_s.rid_size); + } - if (ia64_pal_mem_attrib(&attrib) != 0) - return 0; - - p += sprintf(p, "Supported memory attributes : "); - sep = ""; - for (i = 0; i < 8; i++) { - if (attrib & (1 << i)) { - p += sprintf(p, "%s%s", sep, mem_attrib[i]); - sep = ", "; + if (ia64_pal_mem_attrib(&attrib) == 0) { + p += sprintf(p, "Supported memory attributes : "); + sep = ""; + for (i = 0; i < 8; i++) { + if (attrib & (1 << i)) { + p += sprintf(p, "%s%s", sep, mem_attrib[i]); + sep = ", "; + } } + p += sprintf(p, "\n"); } - p += sprintf(p, "\n"); if ((status = ia64_pal_vm_page_size(&tr_pages, &vw_pages)) !=0) { printk(KERN_ERR "ia64_pal_vm_page_size=%ld\n", status); - return 0; - } - - p += sprintf(p, - "\nTLB walker : %simplemented\n" - "Number of DTR : %d\n" - "Number of ITR : %d\n" - "TLB insertable page sizes : ", - vm_info_1.pal_vm_info_1_s.vw ? "" : "not ", - vm_info_1.pal_vm_info_1_s.max_dtr_entry+1, - vm_info_1.pal_vm_info_1_s.max_itr_entry+1); + } else { + p += sprintf(p, + "\nTLB walker : %simplemented\n" + "Number of DTR : %d\n" + "Number of ITR : %d\n" + "TLB insertable page sizes : ", + vm_info_1.pal_vm_info_1_s.vw ? "" : "not ", + vm_info_1.pal_vm_info_1_s.max_dtr_entry+1, + vm_info_1.pal_vm_info_1_s.max_itr_entry+1); - p = bitvector_process(p, tr_pages); - p += sprintf(p, "\nTLB purgeable page sizes : "); + p = bitvector_process(p, tr_pages); - p = bitvector_process(p, vw_pages); + p += sprintf(p, "\nTLB purgeable page sizes : "); + p = bitvector_process(p, vw_pages); + } if ((status=ia64_get_ptce(&ptce)) != 0) { printk(KERN_ERR "ia64_get_ptce=%ld\n", status); - return 0; - } - - p += sprintf(p, + } else { + p += sprintf(p, "\nPurge base address : 0x%016lx\n" "Purge outer loop count : %d\n" "Purge inner loop count : %d\n" "Purge outer loop stride : %d\n" "Purge inner loop stride : %d\n", - ptce.base, ptce.count[0], ptce.count[1], ptce.stride[0], ptce.stride[1]); + ptce.base, ptce.count[0], ptce.count[1], + ptce.stride[0], ptce.stride[1]); - p += sprintf(p, + p += sprintf(p, "TC Levels : %d\n" "Unique TC(s) : %d\n", vm_info_1.pal_vm_info_1_s.num_tc_levels, vm_info_1.pal_vm_info_1_s.max_unique_tcs); - for(i=0; i < vm_info_1.pal_vm_info_1_s.num_tc_levels; i++) { - for (j=2; j>0 ; j--) { - tc_pages = 0; /* just in case */ + for(i=0; i < vm_info_1.pal_vm_info_1_s.num_tc_levels; i++) { + for (j=2; j>0 ; j--) { + tc_pages = 0; /* just in case */ - /* even without unification, some levels may not be present */ - if ((status=ia64_pal_vm_info(i,j, &tc_info, &tc_pages)) != 0) { - continue; - } + /* even without unification, some levels may not be present */ + if ((status=ia64_pal_vm_info(i,j, &tc_info, &tc_pages)) != 0) { + continue; + } - p += sprintf(p, + p += sprintf(p, "\n%s Translation Cache Level %d:\n" "\tHash sets : %d\n" "\tAssociativity : %d\n" "\tNumber of entries : %d\n" "\tFlags : ", - cache_types[j+tc_info.tc_unified], i+1, tc_info.tc_num_sets, - tc_info.tc_associativity, tc_info.tc_num_entries); + cache_types[j+tc_info.tc_unified], i+1, + tc_info.tc_num_sets, + tc_info.tc_associativity, + tc_info.tc_num_entries); - if (tc_info.tc_pf) p += sprintf(p, "PreferredPageSizeOptimized "); - if (tc_info.tc_unified) p += sprintf(p, "Unified "); - if (tc_info.tc_reduce_tr) p += sprintf(p, "TCReduction"); + if (tc_info.tc_pf) + p += sprintf(p, "PreferredPageSizeOptimized "); + if (tc_info.tc_unified) + p += sprintf(p, "Unified "); + if (tc_info.tc_reduce_tr) + p += sprintf(p, "TCReduction"); - p += sprintf(p, "\n\tSupported page sizes: "); + p += sprintf(p, "\n\tSupported page sizes: "); - p = bitvector_process(p, tc_pages); + p = bitvector_process(p, tc_pages); - /* when unified date (j=2) is enough */ - if (tc_info.tc_unified) break; + /* when unified date (j=2) is enough */ + if (tc_info.tc_unified) + break; + } } } p += sprintf(p, "\n"); @@ -440,14 +445,14 @@ register_info(char *page) p += sprintf(p, "\n"); } - if (ia64_pal_rse_info(&phys_stacked, &hints) != 0) return 0; + if (ia64_pal_rse_info(&phys_stacked, &hints) == 0) { p += sprintf(p, "RSE stacked physical registers : %ld\n" "RSE load/store hints : %ld (%s)\n", phys_stacked, hints.ph_data, hints.ph_data < RSE_HINTS_COUNT ? rse_hints[hints.ph_data]: "(??)"); - + } if (ia64_pal_debug_info(&iregs, &dregs)) return 0; diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index f1201ac8a116..1650353e3f77 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -38,6 +38,7 @@ #include <linux/pagemap.h> #include <linux/mount.h> #include <linux/bitops.h> +#include <linux/rcupdate.h> #include <asm/errno.h> #include <asm/intrinsics.h> @@ -496,7 +497,7 @@ typedef struct { static pfm_stats_t pfm_stats[NR_CPUS]; static pfm_session_t pfm_sessions; /* global sessions information */ -static spinlock_t pfm_alt_install_check = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(pfm_alt_install_check); static pfm_intr_handler_desc_t *pfm_alt_intr_handler; static struct proc_dir_entry *perfmon_dir; @@ -2217,15 +2218,17 @@ static void pfm_free_fd(int fd, struct file *file) { struct files_struct *files = current->files; + struct fdtable *fdt = files_fdtable(files); /* * there ie no fd_uninstall(), so we do it here */ spin_lock(&files->file_lock); - files->fd[fd] = NULL; + rcu_assign_pointer(fdt->fd[fd], NULL); spin_unlock(&files->file_lock); - if (file) put_filp(file); + if (file) + put_filp(file); put_unused_fd(fd); } diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c index 6f0cc7a6634e..ca68e6e44a72 100644 --- a/arch/ia64/kernel/salinfo.c +++ b/arch/ia64/kernel/salinfo.c @@ -22,6 +22,11 @@ * * Dec 5 2004 kaos@sgi.com * Standardize which records are cleared automatically. + * + * Aug 18 2005 kaos@sgi.com + * mca.c may not pass a buffer, a NULL buffer just indicates that a new + * record is available in SAL. + * Replace some NR_CPUS by cpus_online, for hotplug cpu. */ #include <linux/types.h> @@ -193,7 +198,7 @@ shift1_data_saved (struct salinfo_data *data, int shift) * The buffer passed from mca.c points to the output from ia64_log_get. This is * a persistent buffer but its contents can change between the interrupt and * when user space processes the record. Save the record id to identify - * changes. + * changes. If the buffer is NULL then just update the bitmap. */ void salinfo_log_wakeup(int type, u8 *buffer, u64 size, int irqsafe) @@ -206,27 +211,29 @@ salinfo_log_wakeup(int type, u8 *buffer, u64 size, int irqsafe) BUG_ON(type >= ARRAY_SIZE(salinfo_log_name)); - if (irqsafe) - spin_lock_irqsave(&data_saved_lock, flags); - for (i = 0, data_saved = data->data_saved; i < saved_size; ++i, ++data_saved) { - if (!data_saved->buffer) - break; - } - if (i == saved_size) { - if (!data->saved_num) { - shift1_data_saved(data, 0); - data_saved = data->data_saved + saved_size - 1; - } else - data_saved = NULL; - } - if (data_saved) { - data_saved->cpu = smp_processor_id(); - data_saved->id = ((sal_log_record_header_t *)buffer)->id; - data_saved->size = size; - data_saved->buffer = buffer; + if (buffer) { + if (irqsafe) + spin_lock_irqsave(&data_saved_lock, flags); + for (i = 0, data_saved = data->data_saved; i < saved_size; ++i, ++data_saved) { + if (!data_saved->buffer) + break; + } + if (i == saved_size) { + if (!data->saved_num) { + shift1_data_saved(data, 0); + data_saved = data->data_saved + saved_size - 1; + } else + data_saved = NULL; + } + if (data_saved) { + data_saved->cpu = smp_processor_id(); + data_saved->id = ((sal_log_record_header_t *)buffer)->id; + data_saved->size = size; + data_saved->buffer = buffer; + } + if (irqsafe) + spin_unlock_irqrestore(&data_saved_lock, flags); } - if (irqsafe) - spin_unlock_irqrestore(&data_saved_lock, flags); if (!test_and_set_bit(smp_processor_id(), &data->cpu_event)) { if (irqsafe) @@ -244,7 +251,7 @@ salinfo_timeout_check(struct salinfo_data *data) int i; if (!data->open) return; - for (i = 0; i < NR_CPUS; ++i) { + for_each_online_cpu(i) { if (test_bit(i, &data->cpu_event)) { /* double up() is not a problem, user space will see no * records for the additional "events". @@ -291,7 +298,7 @@ retry: n = data->cpu_check; for (i = 0; i < NR_CPUS; i++) { - if (test_bit(n, &data->cpu_event)) { + if (test_bit(n, &data->cpu_event) && cpu_online(n)) { cpu = n; break; } @@ -585,11 +592,10 @@ salinfo_init(void) /* we missed any events before now */ online = 0; - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) { - set_bit(j, &data->cpu_event); - ++online; - } + for_each_online_cpu(j) { + set_bit(j, &data->cpu_event); + ++online; + } sema_init(&data->sem, online); *sdir++ = dir; diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 84f89da7c640..1f5c26dbe705 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -384,7 +384,7 @@ setup_arch (char **cmdline_p) if (early_console_setup(*cmdline_p) == 0) mark_bsp_online(); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* Initialize the ACPI boot-time table parser */ acpi_table_init(); # ifdef CONFIG_ACPI_NUMA @@ -420,7 +420,7 @@ setup_arch (char **cmdline_p) cpu_init(); /* initialize the bootstrap CPU */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI acpi_boot_init(); #endif diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c index b8a0a7d257a9..774f34b675cf 100644 --- a/arch/ia64/kernel/signal.c +++ b/arch/ia64/kernel/signal.c @@ -467,15 +467,12 @@ handle_signal (unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigse if (!setup_frame(sig, ka, info, oldset, scr)) return 0; - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - { - sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); - sigaddset(¤t->blocked, sig); - recalc_sigpending(); - } - spin_unlock_irq(¤t->sighand->siglock); - } + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked, sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); return 1; } diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c index 770fab37928e..f2dbcd1db0d4 100644 --- a/arch/ia64/kernel/sys_ia64.c +++ b/arch/ia64/kernel/sys_ia64.c @@ -35,7 +35,7 @@ arch_get_unmapped_area (struct file *filp, unsigned long addr, unsigned long len return -ENOMEM; #ifdef CONFIG_HUGETLB_PAGE - if (REGION_NUMBER(addr) == REGION_HPAGE) + if (REGION_NUMBER(addr) == RGN_HPAGE) addr = 0; #endif if (!addr) diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index 92ff46ad21e2..706b7734e191 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -36,7 +36,7 @@ int arch_register_cpu(int num) parent = &sysfs_nodes[cpu_to_node(num)]; #endif /* CONFIG_NUMA */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* * If CPEI cannot be re-targetted, and this is * CPEI target, then dont create the control file diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c index 4440c8343fa4..f970359e7edf 100644 --- a/arch/ia64/kernel/traps.c +++ b/arch/ia64/kernel/traps.c @@ -15,6 +15,7 @@ #include <linux/vt_kern.h> /* For unblank_screen() */ #include <linux/module.h> /* for EXPORT_SYMBOL */ #include <linux/hardirq.h> +#include <linux/kprobes.h> #include <asm/fpswa.h> #include <asm/ia32.h> @@ -122,7 +123,7 @@ die_if_kernel (char *str, struct pt_regs *regs, long err) } void -ia64_bad_break (unsigned long break_num, struct pt_regs *regs) +__kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs) { siginfo_t siginfo; int sig, code; @@ -444,7 +445,7 @@ ia64_illegal_op_fault (unsigned long ec, long arg1, long arg2, long arg3, return rv; } -void +void __kprobes ia64_fault (unsigned long vector, unsigned long isr, unsigned long ifa, unsigned long iim, unsigned long itir, long arg5, long arg6, long arg7, struct pt_regs regs) diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c index 490dfc9ab47f..4e9d06c48a8b 100644 --- a/arch/ia64/kernel/uncached.c +++ b/arch/ia64/kernel/uncached.c @@ -184,7 +184,7 @@ uncached_free_page(unsigned long maddr) { int node; - node = nasid_to_cnodeid(NASID_GET(maddr)); + node = paddr_to_nid(maddr - __IA64_UNCACHED_OFFSET); dprintk(KERN_DEBUG "uncached_free_page(%lx) on node %i\n", maddr, node); @@ -217,7 +217,7 @@ uncached_build_memmap(unsigned long start, unsigned long end, void *arg) memset((char *)vstart, 0, length); - node = nasid_to_cnodeid(NASID_GET(start)); + node = paddr_to_nid(start); for (; vstart < vend ; vstart += PAGE_SIZE) { dprintk(KERN_INFO "sticking %lx into the pool!\n", vstart); diff --git a/arch/ia64/kernel/unwind.c b/arch/ia64/kernel/unwind.c index 3288be47bc75..93d5a3b41f69 100644 --- a/arch/ia64/kernel/unwind.c +++ b/arch/ia64/kernel/unwind.c @@ -2020,28 +2020,6 @@ init_frame_info (struct unw_frame_info *info, struct task_struct *t, } void -unw_init_from_interruption (struct unw_frame_info *info, struct task_struct *t, - struct pt_regs *pt, struct switch_stack *sw) -{ - unsigned long sof; - - init_frame_info(info, t, sw, pt->r12); - info->cfm_loc = &pt->cr_ifs; - info->unat_loc = &pt->ar_unat; - info->pfs_loc = &pt->ar_pfs; - sof = *info->cfm_loc & 0x7f; - info->bsp = (unsigned long) ia64_rse_skip_regs((unsigned long *) info->regstk.top, -sof); - info->ip = pt->cr_iip + ia64_psr(pt)->ri; - info->pt = (unsigned long) pt; - UNW_DPRINT(3, "unwind.%s:\n" - " bsp 0x%lx\n" - " sof 0x%lx\n" - " ip 0x%lx\n", - __FUNCTION__, info->bsp, sof, info->ip); - find_save_locs(info); -} - -void unw_init_frame_info (struct unw_frame_info *info, struct task_struct *t, struct switch_stack *sw) { unsigned long sol; diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index a676e79e0681..30d8564e9603 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -48,6 +48,7 @@ SECTIONS *(.text) SCHED_TEXT LOCK_TEXT + KPROBES_TEXT *(.gnu.linkonce.t*) } .text2 : AT(ADDR(.text2) - LOAD_OFFSET) diff --git a/arch/ia64/lib/Makefile b/arch/ia64/lib/Makefile index 1902c3c2ef92..799407e7726f 100644 --- a/arch/ia64/lib/Makefile +++ b/arch/ia64/lib/Makefile @@ -6,7 +6,7 @@ obj-y := io.o lib-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o \ __divdi3.o __udivdi3.o __moddi3.o __umoddi3.o \ - bitop.o checksum.o clear_page.o csum_partial_copy.o copy_page.o \ + bitop.o checksum.o clear_page.o csum_partial_copy.o \ clear_user.o strncpy_from_user.o strlen_user.o strnlen_user.o \ flush.o ip_fast_csum.o do_csum.o \ memset.o strlen.o swiotlb.o diff --git a/arch/ia64/lib/flush.S b/arch/ia64/lib/flush.S index 3e2cfa2c6d39..2a0d27f2f21b 100644 --- a/arch/ia64/lib/flush.S +++ b/arch/ia64/lib/flush.S @@ -20,6 +20,7 @@ * * Note: "in0" and "in1" are preserved for debugging purposes. */ + .section .kprobes.text,"ax" GLOBAL_ENTRY(flush_icache_range) .prologue diff --git a/arch/ia64/lib/memcpy_mck.S b/arch/ia64/lib/memcpy_mck.S index 6f308e62c137..46c9331e7ab5 100644 --- a/arch/ia64/lib/memcpy_mck.S +++ b/arch/ia64/lib/memcpy_mck.S @@ -625,8 +625,11 @@ EK(.ex_handler, (p17) st8 [dst1]=r39,8); \ clrrrb ;; alloc saved_pfs_stack=ar.pfs,3,3,3,0 + cmp.lt p8,p0=A,r0 sub B = dst0, saved_in0 // how many byte copied so far ;; +(p8) mov A = 0; // A shouldn't be negative, cap it + ;; sub C = A, B sub D = saved_in2, A ;; diff --git a/arch/ia64/lib/swiotlb.c b/arch/ia64/lib/swiotlb.c index ab7b3ad99a7f..dbc0b3e449c5 100644 --- a/arch/ia64/lib/swiotlb.c +++ b/arch/ia64/lib/swiotlb.c @@ -93,8 +93,7 @@ static int __init setup_io_tlb_npages(char *str) { if (isdigit(*str)) { - io_tlb_nslabs = simple_strtoul(str, &str, 0) << - (PAGE_SHIFT - IO_TLB_SHIFT); + io_tlb_nslabs = simple_strtoul(str, &str, 0); /* avoid tail segment of size < IO_TLB_SEGSIZE */ io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE); } @@ -117,7 +116,7 @@ swiotlb_init_with_default_size (size_t default_size) unsigned long i; if (!io_tlb_nslabs) { - io_tlb_nslabs = (default_size >> PAGE_SHIFT); + io_tlb_nslabs = (default_size >> IO_TLB_SHIFT); io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE); } diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c index ff62551eb3a1..3c32af910d60 100644 --- a/arch/ia64/mm/fault.c +++ b/arch/ia64/mm/fault.c @@ -9,6 +9,7 @@ #include <linux/mm.h> #include <linux/smp_lock.h> #include <linux/interrupt.h> +#include <linux/kprobes.h> #include <asm/pgtable.h> #include <asm/processor.h> @@ -76,7 +77,7 @@ mapped_kernel_page_is_present (unsigned long address) return pte_present(pte); } -void +void __kprobes ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *regs) { int signal = SIGSEGV, code = SEGV_MAPERR; @@ -229,9 +230,6 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re return; } - if (ia64_done_with_exception(regs)) - return; - /* * Since we have no vma's for region 5, we might get here even if the address is * valid, due to the VHPT walker inserting a non present translation that becomes @@ -242,6 +240,9 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re if (REGION_NUMBER(address) == 5 && mapped_kernel_page_is_present(address)) return; + if (ia64_done_with_exception(regs)) + return; + /* * Oops. The kernel tried to access some bad page. We'll have to terminate things * with extreme prejudice. diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c index e0a776a3044c..2d13889d0a99 100644 --- a/arch/ia64/mm/hugetlbpage.c +++ b/arch/ia64/mm/hugetlbpage.c @@ -76,7 +76,7 @@ int is_aligned_hugepage_range(unsigned long addr, unsigned long len) return -EINVAL; if (addr & ~HPAGE_MASK) return -EINVAL; - if (REGION_NUMBER(addr) != REGION_HPAGE) + if (REGION_NUMBER(addr) != RGN_HPAGE) return -EINVAL; return 0; @@ -87,7 +87,7 @@ struct page *follow_huge_addr(struct mm_struct *mm, unsigned long addr, int writ struct page *page; pte_t *ptep; - if (REGION_NUMBER(addr) != REGION_HPAGE) + if (REGION_NUMBER(addr) != RGN_HPAGE) return ERR_PTR(-EINVAL); ptep = huge_pte_offset(mm, addr); @@ -142,8 +142,8 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, u return -ENOMEM; if (len & ~HPAGE_MASK) return -EINVAL; - /* This code assumes that REGION_HPAGE != 0. */ - if ((REGION_NUMBER(addr) != REGION_HPAGE) || (addr & (HPAGE_SIZE - 1))) + /* This code assumes that RGN_HPAGE != 0. */ + if ((REGION_NUMBER(addr) != RGN_HPAGE) || (addr & (HPAGE_SIZE - 1))) addr = HPAGE_REGION_BASE; else addr = ALIGN(addr, HPAGE_SIZE); diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 65f9958db9f0..1281c609ee98 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -382,13 +382,22 @@ ia64_mmu_init (void *my_cpu_data) if (impl_va_bits < 51 || impl_va_bits > 61) panic("CPU has bogus IMPL_VA_MSB value of %lu!\n", impl_va_bits - 1); + /* + * mapped_space_bits - PAGE_SHIFT is the total number of ptes we need, + * which must fit into "vmlpt_bits - pte_bits" slots. Second half of + * the test makes sure that our mapped space doesn't overlap the + * unimplemented hole in the middle of the region. + */ + if ((mapped_space_bits - PAGE_SHIFT > vmlpt_bits - pte_bits) || + (mapped_space_bits > impl_va_bits - 1)) + panic("Cannot build a big enough virtual-linear page table" + " to cover mapped address space.\n" + " Try using a smaller page size.\n"); + /* place the VMLPT at the end of each page-table mapped region: */ pta = POW2(61) - POW2(vmlpt_bits); - if (POW2(mapped_space_bits) >= pta) - panic("mm/init: overlap between virtually mapped linear page table and " - "mapped kernel space!"); /* * Set the (virtually mapped linear) page table address. Bit * 8 selects between the short and long format, bits 2-7 the diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index f9472c50ab42..9b5de589b82f 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -24,7 +24,6 @@ #include <asm/machvec.h> #include <asm/page.h> -#include <asm/segment.h> #include <asm/system.h> #include <asm/io.h> #include <asm/sal.h> @@ -499,13 +498,11 @@ pcibios_enable_device (struct pci_dev *dev, int mask) return acpi_pci_irq_enable(dev); } -#ifdef CONFIG_ACPI_DEALLOCATE_IRQ void pcibios_disable_device (struct pci_dev *dev) { acpi_pci_irq_disable(dev); } -#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */ void pcibios_align_resource (void *data, struct resource *res, diff --git a/arch/ia64/sn/include/tio.h b/arch/ia64/sn/include/tio.h index 0139124dd54a..6b2e7b75eb19 100644 --- a/arch/ia64/sn/include/tio.h +++ b/arch/ia64/sn/include/tio.h @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved. */ #ifndef _ASM_IA64_SN_TIO_H @@ -26,6 +26,10 @@ #define TIO_ITTE_VALID_MASK 0x1 #define TIO_ITTE_VALID_SHIFT 16 +#define TIO_ITTE_WIDGET(itte) \ + (((itte) >> TIO_ITTE_WIDGET_SHIFT) & TIO_ITTE_WIDGET_MASK) +#define TIO_ITTE_VALID(itte) \ + (((itte) >> TIO_ITTE_VALID_SHIFT) & TIO_ITTE_VALID_MASK) #define TIO_ITTE_PUT(nasid, bigwin, widget, addr, valid) \ REMOTE_HUB_S((nasid), TIO_ITTE(bigwin), \ diff --git a/arch/ia64/sn/include/xtalk/hubdev.h b/arch/ia64/sn/include/xtalk/hubdev.h index 580a1c0403a7..71c2b271b4c6 100644 --- a/arch/ia64/sn/include/xtalk/hubdev.h +++ b/arch/ia64/sn/include/xtalk/hubdev.h @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. */ #ifndef _ASM_IA64_SN_XTALK_HUBDEV_H #define _ASM_IA64_SN_XTALK_HUBDEV_H @@ -16,6 +16,9 @@ #define IIO_ITTE_WIDGET_MASK ((1<<IIO_ITTE_WIDGET_BITS)-1) #define IIO_ITTE_WIDGET_SHIFT 8 +#define IIO_ITTE_WIDGET(itte) \ + (((itte) >> IIO_ITTE_WIDGET_SHIFT) & IIO_ITTE_WIDGET_MASK) + /* * Use the top big window as a surrogate for the first small window */ @@ -34,7 +37,8 @@ struct sn_flush_device_list { unsigned long sfdl_force_int_addr; unsigned long sfdl_flush_value; volatile unsigned long *sfdl_flush_addr; - uint64_t sfdl_persistent_busnum; + uint32_t sfdl_persistent_busnum; + uint32_t sfdl_persistent_segment; struct pcibus_info *sfdl_pcibus_info; spinlock_t sfdl_flush_lock; }; @@ -58,7 +62,8 @@ struct hubdev_info { void *hdi_nodepda; void *hdi_node_vertex; - void *hdi_xtalk_vertex; + uint32_t max_segment_number; + uint32_t max_pcibus_number; }; extern void hubdev_init_node(nodepda_t *, cnodeid_t); diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c index 647deae9bfcd..45854c637e9c 100644 --- a/arch/ia64/sn/kernel/bte.c +++ b/arch/ia64/sn/kernel/bte.c @@ -29,16 +29,30 @@ /* two interfaces on two btes */ #define MAX_INTERFACES_TO_TRY 4 +#define MAX_NODES_TO_TRY 2 static struct bteinfo_s *bte_if_on_node(nasid_t nasid, int interface) { nodepda_t *tmp_nodepda; + if (nasid_to_cnodeid(nasid) == -1) + return (struct bteinfo_s *)NULL;; + tmp_nodepda = NODEPDA(nasid_to_cnodeid(nasid)); return &tmp_nodepda->bte_if[interface]; } +static inline void bte_start_transfer(struct bteinfo_s *bte, u64 len, u64 mode) +{ + if (is_shub2()) { + BTE_CTRL_STORE(bte, (IBLS_BUSY | ((len) | (mode) << 24))); + } else { + BTE_LNSTAT_STORE(bte, len); + BTE_CTRL_STORE(bte, mode); + } +} + /************************************************************************ * Block Transfer Engine copy related functions. * @@ -67,13 +81,15 @@ bte_result_t bte_copy(u64 src, u64 dest, u64 len, u64 mode, void *notification) { u64 transfer_size; u64 transfer_stat; + u64 notif_phys_addr; struct bteinfo_s *bte; bte_result_t bte_status; unsigned long irq_flags; unsigned long itc_end = 0; - struct bteinfo_s *btes_to_try[MAX_INTERFACES_TO_TRY]; - int bte_if_index; - int bte_pri, bte_sec; + int nasid_to_try[MAX_NODES_TO_TRY]; + int my_nasid = get_nasid(); + int bte_if_index, nasid_index; + int bte_first, btes_per_node = BTES_PER_NODE; BTE_PRINTK(("bte_copy(0x%lx, 0x%lx, 0x%lx, 0x%lx, 0x%p)\n", src, dest, len, mode, notification)); @@ -86,36 +102,26 @@ bte_result_t bte_copy(u64 src, u64 dest, u64 len, u64 mode, void *notification) (src & L1_CACHE_MASK) || (dest & L1_CACHE_MASK)); BUG_ON(!(len < ((BTE_LEN_MASK + 1) << L1_CACHE_SHIFT))); - /* CPU 0 (per node) tries bte0 first, CPU 1 try bte1 first */ - if (cpuid_to_subnode(smp_processor_id()) == 0) { - bte_pri = 0; - bte_sec = 1; - } else { - bte_pri = 1; - bte_sec = 0; - } + /* + * Start with interface corresponding to cpu number + */ + bte_first = raw_smp_processor_id() % btes_per_node; if (mode & BTE_USE_DEST) { /* try remote then local */ - btes_to_try[0] = bte_if_on_node(NASID_GET(dest), bte_pri); - btes_to_try[1] = bte_if_on_node(NASID_GET(dest), bte_sec); + nasid_to_try[0] = NASID_GET(dest); if (mode & BTE_USE_ANY) { - btes_to_try[2] = bte_if_on_node(get_nasid(), bte_pri); - btes_to_try[3] = bte_if_on_node(get_nasid(), bte_sec); + nasid_to_try[1] = my_nasid; } else { - btes_to_try[2] = NULL; - btes_to_try[3] = NULL; + nasid_to_try[1] = (int)NULL; } } else { /* try local then remote */ - btes_to_try[0] = bte_if_on_node(get_nasid(), bte_pri); - btes_to_try[1] = bte_if_on_node(get_nasid(), bte_sec); + nasid_to_try[0] = my_nasid; if (mode & BTE_USE_ANY) { - btes_to_try[2] = bte_if_on_node(NASID_GET(dest), bte_pri); - btes_to_try[3] = bte_if_on_node(NASID_GET(dest), bte_sec); + nasid_to_try[1] = NASID_GET(dest); } else { - btes_to_try[2] = NULL; - btes_to_try[3] = NULL; + nasid_to_try[1] = (int)NULL; } } @@ -123,11 +129,12 @@ retry_bteop: do { local_irq_save(irq_flags); - bte_if_index = 0; + bte_if_index = bte_first; + nasid_index = 0; /* Attempt to lock one of the BTE interfaces. */ - while (bte_if_index < MAX_INTERFACES_TO_TRY) { - bte = btes_to_try[bte_if_index++]; + while (nasid_index < MAX_NODES_TO_TRY) { + bte = bte_if_on_node(nasid_to_try[nasid_index],bte_if_index); if (bte == NULL) { continue; @@ -143,6 +150,15 @@ retry_bteop: break; } } + + bte_if_index = (bte_if_index + 1) % btes_per_node; /* Next interface */ + if (bte_if_index == bte_first) { + /* + * We've tried all interfaces on this node + */ + nasid_index++; + } + bte = NULL; } @@ -169,7 +185,13 @@ retry_bteop: /* Initialize the notification to a known value. */ *bte->most_rcnt_na = BTE_WORD_BUSY; + notif_phys_addr = TO_PHYS(ia64_tpa((unsigned long)bte->most_rcnt_na)); + if (is_shub2()) { + src = SH2_TIO_PHYS_TO_DMA(src); + dest = SH2_TIO_PHYS_TO_DMA(dest); + notif_phys_addr = SH2_TIO_PHYS_TO_DMA(notif_phys_addr); + } /* Set the source and destination registers */ BTE_PRINTKV(("IBSA = 0x%lx)\n", (TO_PHYS(src)))); BTE_SRC_STORE(bte, TO_PHYS(src)); @@ -177,14 +199,12 @@ retry_bteop: BTE_DEST_STORE(bte, TO_PHYS(dest)); /* Set the notification register */ - BTE_PRINTKV(("IBNA = 0x%lx)\n", - TO_PHYS(ia64_tpa((unsigned long)bte->most_rcnt_na)))); - BTE_NOTIF_STORE(bte, - TO_PHYS(ia64_tpa((unsigned long)bte->most_rcnt_na))); + BTE_PRINTKV(("IBNA = 0x%lx)\n", notif_phys_addr)); + BTE_NOTIF_STORE(bte, notif_phys_addr); /* Initiate the transfer */ BTE_PRINTK(("IBCT = 0x%lx)\n", BTE_VALID_MODE(mode))); - BTE_START_TRANSFER(bte, transfer_size, BTE_VALID_MODE(mode)); + bte_start_transfer(bte, transfer_size, BTE_VALID_MODE(mode)); itc_end = ia64_get_itc() + (40000000 * local_cpu_data->cyc_per_usec); @@ -195,6 +215,7 @@ retry_bteop: } while ((transfer_stat = *bte->most_rcnt_na) == BTE_WORD_BUSY) { + cpu_relax(); if (ia64_get_itc() > itc_end) { BTE_PRINTK(("BTE timeout nasid 0x%x bte%d IBLS = 0x%lx na 0x%lx\n", NASID_GET(bte->bte_base_addr), bte->bte_num, diff --git a/arch/ia64/sn/kernel/huberror.c b/arch/ia64/sn/kernel/huberror.c index 5c39b43ba3c0..5c5eb01c50f0 100644 --- a/arch/ia64/sn/kernel/huberror.c +++ b/arch/ia64/sn/kernel/huberror.c @@ -76,7 +76,7 @@ void hubiio_crb_free(struct hubdev_info *hubdev_info, int crbnum) */ REMOTE_HUB_S(hubdev_info->hdi_nasid, IIO_ICDR, (IIO_ICDR_PND | crbnum)); while (REMOTE_HUB_L(hubdev_info->hdi_nasid, IIO_ICDR) & IIO_ICDR_PND) - udelay(1); + cpu_relax(); } diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index 414cdf2e3c96..906622d9f933 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -18,6 +18,7 @@ #include <asm/sn/simulator.h> #include <asm/sn/sn_sal.h> #include <asm/sn/tioca_provider.h> +#include <asm/sn/tioce_provider.h> #include "xtalk/hubdev.h" #include "xtalk/xwidgetdev.h" @@ -44,6 +45,9 @@ int sn_ioif_inited = 0; /* SN I/O infrastructure initialized? */ struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES]; /* indexed by asic type */ +static int max_segment_number = 0; /* Default highest segment number */ +static int max_pcibus_number = 255; /* Default highest pci bus number */ + /* * Hooks and struct for unsupported pci providers */ @@ -157,13 +161,28 @@ static void sn_fixup_ionodes(void) uint64_t nasid; int i, widget; + /* + * Get SGI Specific HUB chipset information. + * Inform Prom that this kernel can support domain bus numbering. + */ for (i = 0; i < numionodes; i++) { hubdev = (struct hubdev_info *)(NODEPDA(i)->pdinfo); nasid = cnodeid_to_nasid(i); + hubdev->max_segment_number = 0xffffffff; + hubdev->max_pcibus_number = 0xff; status = sal_get_hubdev_info(nasid, (uint64_t) __pa(hubdev)); if (status) continue; + /* Save the largest Domain and pcibus numbers found. */ + if (hubdev->max_segment_number) { + /* + * Dealing with a Prom that supports segments. + */ + max_segment_number = hubdev->max_segment_number; + max_pcibus_number = hubdev->max_pcibus_number; + } + /* Attach the error interrupt handlers */ if (nasid & 1) ice_error_init(hubdev); @@ -230,7 +249,7 @@ void sn_pci_unfixup_slot(struct pci_dev *dev) void sn_pci_fixup_slot(struct pci_dev *dev) { int idx; - int segment = 0; + int segment = pci_domain_nr(dev->bus); int status = 0; struct pcibus_bussoft *bs; struct pci_bus *host_pci_bus; @@ -283,9 +302,9 @@ void sn_pci_fixup_slot(struct pci_dev *dev) * PCI host_pci_dev struct and set up host bus linkages */ - bus_no = SN_PCIDEV_INFO(dev)->pdi_slot_host_handle >> 32; + bus_no = (SN_PCIDEV_INFO(dev)->pdi_slot_host_handle >> 32) & 0xff; devfn = SN_PCIDEV_INFO(dev)->pdi_slot_host_handle & 0xffffffff; - host_pci_bus = pci_find_bus(pci_domain_nr(dev->bus), bus_no); + host_pci_bus = pci_find_bus(segment, bus_no); host_pci_dev = pci_get_slot(host_pci_bus, devfn); SN_PCIDEV_INFO(dev)->host_pci_dev = host_pci_dev; @@ -333,6 +352,7 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) prom_bussoft_ptr = __va(prom_bussoft_ptr); controller = kcalloc(1,sizeof(struct pci_controller), GFP_KERNEL); + controller->segment = segment; if (!controller) BUG(); @@ -390,7 +410,7 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) if (controller->node >= num_online_nodes()) { struct pcibus_bussoft *b = SN_PCIBUS_BUSSOFT(bus); - printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%lu" + printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%u" "L_IO=%lx L_MEM=%lx BASE=%lx\n", b->bs_asic_type, b->bs_xid, b->bs_persist_busnum, b->bs_legacy_io, b->bs_legacy_mem, b->bs_base); @@ -411,7 +431,7 @@ void sn_bus_store_sysdata(struct pci_dev *dev) { struct sysdata_el *element; - element = kcalloc(1, sizeof(struct sysdata_el), GFP_KERNEL); + element = kzalloc(sizeof(struct sysdata_el), GFP_KERNEL); if (!element) { dev_dbg(dev, "%s: out of memory!\n", __FUNCTION__); return; @@ -445,6 +465,7 @@ sn_sysdata_free_start: static int __init sn_pci_init(void) { int i = 0; + int j = 0; struct pci_dev *pci_dev = NULL; extern void sn_init_cpei_timer(void); #ifdef CONFIG_PROC_FS @@ -464,6 +485,7 @@ static int __init sn_pci_init(void) pcibr_init_provider(); tioca_init_provider(); + tioce_init_provider(); /* * This is needed to avoid bounce limit checks in the blk layer @@ -479,8 +501,9 @@ static int __init sn_pci_init(void) #endif /* busses are not known yet ... */ - for (i = 0; i < PCI_BUSES_TO_SCAN; i++) - sn_pci_controller_fixup(0, i, NULL); + for (i = 0; i <= max_segment_number; i++) + for (j = 0; j <= max_pcibus_number; j++) + sn_pci_controller_fixup(i, j, NULL); /* * Generic Linux PCI Layer has created the pci_bus and pci_dev diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index 84d276a14ecb..01d18b7b5bb3 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -5,7 +5,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2000-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2000-2005 Silicon Graphics, Inc. All Rights Reserved. */ #include <linux/irq.h> @@ -23,7 +23,7 @@ static void force_interrupt(int irq); static void register_intr_pda(struct sn_irq_info *sn_irq_info); static void unregister_intr_pda(struct sn_irq_info *sn_irq_info); -extern int sn_force_interrupt_flag; +int sn_force_interrupt_flag = 1; extern int sn_ioif_inited; static struct list_head **sn_irq_lh; static spinlock_t sn_irq_info_lock = SPIN_LOCK_UNLOCKED; /* non-IRQ lock */ @@ -76,16 +76,14 @@ static void sn_enable_irq(unsigned int irq) static void sn_ack_irq(unsigned int irq) { - uint64_t event_occurred, mask = 0; - int nasid; + u64 event_occurred, mask = 0; irq = irq & 0xff; - nasid = get_nasid(); event_occurred = - HUB_L((uint64_t *) GLOBAL_MMR_ADDR(nasid, SH_EVENT_OCCURRED)); + HUB_L((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED)); mask = event_occurred & SH_ALL_INT_MASK; - HUB_S((uint64_t *) GLOBAL_MMR_ADDR(nasid, SH_EVENT_OCCURRED_ALIAS), - mask); + HUB_S((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED_ALIAS), + mask); __set_bit(irq, (volatile void *)pda->sn_in_service_ivecs); move_irq(irq); @@ -93,15 +91,12 @@ static void sn_ack_irq(unsigned int irq) static void sn_end_irq(unsigned int irq) { - int nasid; int ivec; - uint64_t event_occurred; + u64 event_occurred; ivec = irq & 0xff; if (ivec == SGI_UART_VECTOR) { - nasid = get_nasid(); - event_occurred = HUB_L((uint64_t *) GLOBAL_MMR_ADDR - (nasid, SH_EVENT_OCCURRED)); + event_occurred = HUB_L((u64*)LOCAL_MMR_ADDR (SH_EVENT_OCCURRED)); /* If the UART bit is set here, we may have received an * interrupt from the UART that the driver missed. To * make sure, we IPI ourselves to force us to look again. @@ -132,6 +127,7 @@ static void sn_set_affinity_irq(unsigned int irq, cpumask_t mask) int local_widget, status; nasid_t local_nasid; struct sn_irq_info *new_irq_info; + struct sn_pcibus_provider *pci_provider; new_irq_info = kmalloc(sizeof(struct sn_irq_info), GFP_ATOMIC); if (new_irq_info == NULL) @@ -171,8 +167,9 @@ static void sn_set_affinity_irq(unsigned int irq, cpumask_t mask) new_irq_info->irq_cpuid = cpuid; register_intr_pda(new_irq_info); - if (IS_PCI_BRIDGE_ASIC(new_irq_info->irq_bridge_type)) - pcibr_change_devices_irq(new_irq_info); + pci_provider = sn_pci_provider[new_irq_info->irq_bridge_type]; + if (pci_provider && pci_provider->target_interrupt) + (pci_provider->target_interrupt)(new_irq_info); spin_lock(&sn_irq_info_lock); list_replace_rcu(&sn_irq_info->list, &new_irq_info->list); @@ -317,6 +314,16 @@ void sn_irq_unfixup(struct pci_dev *pci_dev) pci_dev_put(pci_dev); } +static inline void +sn_call_force_intr_provider(struct sn_irq_info *sn_irq_info) +{ + struct sn_pcibus_provider *pci_provider; + + pci_provider = sn_pci_provider[sn_irq_info->irq_bridge_type]; + if (pci_provider && pci_provider->force_interrupt) + (*pci_provider->force_interrupt)(sn_irq_info); +} + static void force_interrupt(int irq) { struct sn_irq_info *sn_irq_info; @@ -325,11 +332,9 @@ static void force_interrupt(int irq) return; rcu_read_lock(); - list_for_each_entry_rcu(sn_irq_info, sn_irq_lh[irq], list) { - if (IS_PCI_BRIDGE_ASIC(sn_irq_info->irq_bridge_type) && - (sn_irq_info->irq_bridge != NULL)) - pcibr_force_interrupt(sn_irq_info); - } + list_for_each_entry_rcu(sn_irq_info, sn_irq_lh[irq], list) + sn_call_force_intr_provider(sn_irq_info); + rcu_read_unlock(); } @@ -351,6 +356,14 @@ static void sn_check_intr(int irq, struct sn_irq_info *sn_irq_info) struct pcidev_info *pcidev_info; struct pcibus_info *pcibus_info; + /* + * Bridge types attached to TIO (anything but PIC) do not need this WAR + * since they do not target Shub II interrupt registers. If that + * ever changes, this check needs to accomodate. + */ + if (sn_irq_info->irq_bridge_type != PCIIO_ASIC_TYPE_PIC) + return; + pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo; if (!pcidev_info) return; @@ -377,16 +390,12 @@ static void sn_check_intr(int irq, struct sn_irq_info *sn_irq_info) break; } if (!test_bit(irr_bit, &irr_reg)) { - if (!test_bit(irq, pda->sn_soft_irr)) { - if (!test_bit(irq, pda->sn_in_service_ivecs)) { - regval &= 0xff; - if (sn_irq_info->irq_int_bit & regval & - sn_irq_info->irq_last_intr) { - regval &= - ~(sn_irq_info-> - irq_int_bit & regval); - pcibr_force_interrupt(sn_irq_info); - } + if (!test_bit(irq, pda->sn_in_service_ivecs)) { + regval &= 0xff; + if (sn_irq_info->irq_int_bit & regval & + sn_irq_info->irq_last_intr) { + regval &= ~(sn_irq_info->irq_int_bit & regval); + sn_call_force_intr_provider(sn_irq_info); } } } @@ -404,13 +413,7 @@ void sn_lb_int_war_check(void) rcu_read_lock(); for (i = pda->sn_first_irq; i <= pda->sn_last_irq; i++) { list_for_each_entry_rcu(sn_irq_info, sn_irq_lh[i], list) { - /* - * Only call for PCI bridges that are fully - * initialized. - */ - if (IS_PCI_BRIDGE_ASIC(sn_irq_info->irq_bridge_type) && - (sn_irq_info->irq_bridge != NULL)) - sn_check_intr(i, sn_irq_info); + sn_check_intr(i, sn_irq_info); } } rcu_read_unlock(); diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 7c7fe441d623..6f8c5883716b 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -49,6 +49,7 @@ #include <asm/sn/clksupport.h> #include <asm/sn/sn_sal.h> #include <asm/sn/geo.h> +#include <asm/sn/sn_feature_sets.h> #include "xtalk/xwidgetdev.h" #include "xtalk/hubdev.h" #include <asm/sn/klconfig.h> @@ -56,7 +57,7 @@ DEFINE_PER_CPU(struct pda_s, pda_percpu); -#define MAX_PHYS_MEMORY (1UL << 49) /* 1 TB */ +#define MAX_PHYS_MEMORY (1UL << IA64_MAX_PHYS_BITS) /* Max physical address supported */ lboard_t *root_lboard[MAX_COMPACT_NODES]; @@ -80,8 +81,6 @@ EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid); DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda); EXPORT_PER_CPU_SYMBOL(__sn_nodepda); -partid_t sn_partid = -1; -EXPORT_SYMBOL(sn_partid); char sn_system_serial_number_string[128]; EXPORT_SYMBOL(sn_system_serial_number_string); u64 sn_partition_serial_number; @@ -99,6 +98,7 @@ EXPORT_SYMBOL(sn_region_size); int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */ short physical_node_map[MAX_PHYSNODE_ID]; +static unsigned long sn_prom_features[MAX_PROM_FEATURE_SETS]; EXPORT_SYMBOL(physical_node_map); @@ -273,7 +273,10 @@ void __init sn_setup(char **cmdline_p) u32 version = sn_sal_rev(); extern void sn_cpu_init(void); - ia64_sn_plat_set_error_handling_features(); + ia64_sn_plat_set_error_handling_features(); // obsolete + ia64_sn_set_os_feature(OSF_MCA_SLV_TO_OS_INIT_SLV); + ia64_sn_set_os_feature(OSF_FEAT_LOG_SBES); + #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) /* @@ -316,16 +319,6 @@ void __init sn_setup(char **cmdline_p) printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF); - /* - * Confirm the SAL we're running on is recent enough... - */ - if (version < SN_SAL_MIN_VERSION) { - printk(KERN_ERR "This kernel needs SGI SAL version >= " - "%x.%02x\n", SN_SAL_MIN_VERSION >> 8, - SN_SAL_MIN_VERSION & 0x00FF); - panic("PROM version too old\n"); - } - master_nasid = boot_get_nasid(); status = @@ -403,6 +396,7 @@ static void __init sn_init_pdas(char **cmdline_p) memset(nodepdaindr[cnode], 0, sizeof(nodepda_t)); memset(nodepdaindr[cnode]->phys_cpuid, -1, sizeof(nodepdaindr[cnode]->phys_cpuid)); + spin_lock_init(&nodepdaindr[cnode]->ptc_lock); } /* @@ -481,6 +475,10 @@ void __init sn_cpu_init(void) if (nodepdaindr[0] == NULL) return; + for (i = 0; i < MAX_PROM_FEATURE_SETS; i++) + if (ia64_sn_get_prom_feature_set(i, &sn_prom_features[i]) != 0) + break; + cpuid = smp_processor_id(); cpuphyid = get_sapicid(); @@ -532,8 +530,8 @@ void __init sn_cpu_init(void) */ { u64 pio1[] = {SH1_PIO_WRITE_STATUS_0, 0, SH1_PIO_WRITE_STATUS_1, 0}; - u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_1, - SH2_PIO_WRITE_STATUS_2, SH2_PIO_WRITE_STATUS_3}; + u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_2, + SH2_PIO_WRITE_STATUS_1, SH2_PIO_WRITE_STATUS_3}; u64 *pio; pio = is_shub1() ? pio1 : pio2; pda->pio_write_status_addr = (volatile unsigned long *) LOCAL_MMR_ADDR(pio[slice]); @@ -652,3 +650,12 @@ nasid_slice_to_cpuid(int nasid, int slice) return -1; } + +int sn_prom_feature_available(int id) +{ + if (id >= BITS_PER_LONG * MAX_PROM_FEATURE_SETS) + return 0; + return test_bit(id, sn_prom_features); +} +EXPORT_SYMBOL(sn_prom_feature_available); + diff --git a/arch/ia64/sn/kernel/sn2/ptc_deadlock.S b/arch/ia64/sn/kernel/sn2/ptc_deadlock.S index 96cb71d15682..3fa95065a446 100644 --- a/arch/ia64/sn/kernel/sn2/ptc_deadlock.S +++ b/arch/ia64/sn/kernel/sn2/ptc_deadlock.S @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved. */ #include <asm/types.h> @@ -11,7 +11,7 @@ #define DEADLOCKBIT SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT #define WRITECOUNTMASK SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK -#define ALIAS_OFFSET (SH1_PIO_WRITE_STATUS_0_ALIAS-SH1_PIO_WRITE_STATUS_0) +#define ALIAS_OFFSET 8 .global sn2_ptc_deadlock_recovery_core @@ -36,13 +36,15 @@ sn2_ptc_deadlock_recovery_core: extr.u piowcphy=piowc,0,61;; // Convert piowc to uncached physical address dep piowcphy=-1,piowcphy,63,1 movl mask=WRITECOUNTMASK + mov r8=r0 1: add scr2=ALIAS_OFFSET,piowc // Address of WRITE_STATUS alias register - mov scr1=7;; // Clear DEADLOCK, WRITE_ERROR, MULTI_WRITE_ERROR - st8.rel [scr2]=scr1;; + ;; + ld8.acq scr1=[scr2];; 5: ld8.acq scr1=[piowc];; // Wait for PIOs to complete. + hint @pause and scr2=scr1,mask;; // mask of writecount bits cmp.ne p6,p0=zeroval,scr2 (p6) br.cond.sptk 5b @@ -57,6 +59,7 @@ sn2_ptc_deadlock_recovery_core: st8.rel [ptc0]=data0 // Write PTC0 & wait for completion. 5: ld8.acq scr1=[piowcphy];; // Wait for PIOs to complete. + hint @pause and scr2=scr1,mask;; // mask of writecount bits cmp.ne p6,p0=zeroval,scr2 (p6) br.cond.sptk 5b;; @@ -67,6 +70,7 @@ sn2_ptc_deadlock_recovery_core: (p7) st8.rel [ptc1]=data1;; // Now write PTC1. 5: ld8.acq scr1=[piowcphy];; // Wait for PIOs to complete. + hint @pause and scr2=scr1,mask;; // mask of writecount bits cmp.ne p6,p0=zeroval,scr2 (p6) br.cond.sptk 5b @@ -77,6 +81,7 @@ sn2_ptc_deadlock_recovery_core: srlz.i;; ////////////// END PHYSICAL MODE //////////////////// +(p8) add r8=1,r8 (p8) br.cond.spnt 1b;; // Repeat if DEADLOCK occurred. br.ret.sptk rp diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c index 7af05a7ac743..0a4ee50c302f 100644 --- a/arch/ia64/sn/kernel/sn2/sn2_smp.c +++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c @@ -5,7 +5,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved. */ #include <linux/init.h> @@ -20,6 +20,8 @@ #include <linux/module.h> #include <linux/bitops.h> #include <linux/nodemask.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <asm/processor.h> #include <asm/irq.h> @@ -39,12 +41,120 @@ #include <asm/sn/nodepda.h> #include <asm/sn/rw_mmr.h> -void sn2_ptc_deadlock_recovery(volatile unsigned long *, unsigned long data0, - volatile unsigned long *, unsigned long data1); +DEFINE_PER_CPU(struct ptc_stats, ptcstats); +DECLARE_PER_CPU(struct ptc_stats, ptcstats); static __cacheline_aligned DEFINE_SPINLOCK(sn2_global_ptc_lock); -static unsigned long sn2_ptc_deadlock_count; +void sn2_ptc_deadlock_recovery(short *, short, int, volatile unsigned long *, unsigned long data0, + volatile unsigned long *, unsigned long data1); + +#ifdef DEBUG_PTC +/* + * ptctest: + * + * xyz - 3 digit hex number: + * x - Force PTC purges to use shub: + * 0 - no force + * 1 - force + * y - interupt enable + * 0 - disable interrupts + * 1 - leave interuupts enabled + * z - type of lock: + * 0 - global lock + * 1 - node local lock + * 2 - no lock + * + * Note: on shub1, only ptctest == 0 is supported. Don't try other values! + */ + +static unsigned int sn2_ptctest = 0; + +static int __init ptc_test(char *str) +{ + get_option(&str, &sn2_ptctest); + return 1; +} +__setup("ptctest=", ptc_test); + +static inline int ptc_lock(unsigned long *flagp) +{ + unsigned long opt = sn2_ptctest & 255; + + switch (opt) { + case 0x00: + spin_lock_irqsave(&sn2_global_ptc_lock, *flagp); + break; + case 0x01: + spin_lock_irqsave(&sn_nodepda->ptc_lock, *flagp); + break; + case 0x02: + local_irq_save(*flagp); + break; + case 0x10: + spin_lock(&sn2_global_ptc_lock); + break; + case 0x11: + spin_lock(&sn_nodepda->ptc_lock); + break; + case 0x12: + break; + default: + BUG(); + } + return opt; +} + +static inline void ptc_unlock(unsigned long flags, int opt) +{ + switch (opt) { + case 0x00: + spin_unlock_irqrestore(&sn2_global_ptc_lock, flags); + break; + case 0x01: + spin_unlock_irqrestore(&sn_nodepda->ptc_lock, flags); + break; + case 0x02: + local_irq_restore(flags); + break; + case 0x10: + spin_unlock(&sn2_global_ptc_lock); + break; + case 0x11: + spin_unlock(&sn_nodepda->ptc_lock); + break; + case 0x12: + break; + default: + BUG(); + } +} +#else + +#define sn2_ptctest 0 + +static inline int ptc_lock(unsigned long *flagp) +{ + spin_lock_irqsave(&sn2_global_ptc_lock, *flagp); + return 0; +} + +static inline void ptc_unlock(unsigned long flags, int opt) +{ + spin_unlock_irqrestore(&sn2_global_ptc_lock, flags); +} +#endif + +struct ptc_stats { + unsigned long ptc_l; + unsigned long change_rid; + unsigned long shub_ptc_flushes; + unsigned long nodes_flushed; + unsigned long deadlocks; + unsigned long lock_itc_clocks; + unsigned long shub_itc_clocks; + unsigned long shub_itc_clocks_max; +}; static inline unsigned long wait_piowc(void) { @@ -89,9 +199,9 @@ void sn2_global_tlb_purge(unsigned long start, unsigned long end, unsigned long nbits) { - int i, shub1, cnode, mynasid, cpu, lcpu = 0, nasid, flushed = 0; + int i, opt, shub1, cnode, mynasid, cpu, lcpu = 0, nasid, flushed = 0; volatile unsigned long *ptc0, *ptc1; - unsigned long flags = 0, data0 = 0, data1 = 0; + unsigned long itc, itc2, flags, data0 = 0, data1 = 0; struct mm_struct *mm = current->active_mm; short nasids[MAX_NUMNODES], nix; nodemask_t nodes_flushed; @@ -114,16 +224,19 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end, start += (1UL << nbits); } while (start < end); ia64_srlz_i(); + __get_cpu_var(ptcstats).ptc_l++; preempt_enable(); return; } if (atomic_read(&mm->mm_users) == 1) { flush_tlb_mm(mm); + __get_cpu_var(ptcstats).change_rid++; preempt_enable(); return; } + itc = ia64_get_itc(); nix = 0; for_each_node_mask(cnode, nodes_flushed) nasids[nix++] = cnodeid_to_nasid(cnode); @@ -148,7 +261,12 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end, mynasid = get_nasid(); - spin_lock_irqsave(&sn2_global_ptc_lock, flags); + itc = ia64_get_itc(); + opt = ptc_lock(&flags); + itc2 = ia64_get_itc(); + __get_cpu_var(ptcstats).lock_itc_clocks += itc2 - itc; + __get_cpu_var(ptcstats).shub_ptc_flushes++; + __get_cpu_var(ptcstats).nodes_flushed += nix; do { if (shub1) @@ -157,7 +275,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end, data0 = (data0 & ~SH2_PTC_ADDR_MASK) | (start & SH2_PTC_ADDR_MASK); for (i = 0; i < nix; i++) { nasid = nasids[i]; - if (unlikely(nasid == mynasid)) { + if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid)) { ia64_ptcga(start, nbits << 2); ia64_srlz_i(); } else { @@ -169,18 +287,22 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end, flushed = 1; } } - if (flushed && (wait_piowc() & - SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK)) { - sn2_ptc_deadlock_recovery(ptc0, data0, ptc1, data1); + (SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK))) { + sn2_ptc_deadlock_recovery(nasids, nix, mynasid, ptc0, data0, ptc1, data1); } start += (1UL << nbits); } while (start < end); - spin_unlock_irqrestore(&sn2_global_ptc_lock, flags); + itc2 = ia64_get_itc() - itc2; + __get_cpu_var(ptcstats).shub_itc_clocks += itc2; + if (itc2 > __get_cpu_var(ptcstats).shub_itc_clocks_max) + __get_cpu_var(ptcstats).shub_itc_clocks_max = itc2; + + ptc_unlock(flags, opt); preempt_enable(); } @@ -192,31 +314,29 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end, * TLB flush transaction. The recovery sequence is somewhat tricky & is * coded in assembly language. */ -void sn2_ptc_deadlock_recovery(volatile unsigned long *ptc0, unsigned long data0, +void sn2_ptc_deadlock_recovery(short *nasids, short nix, int mynasid, volatile unsigned long *ptc0, unsigned long data0, volatile unsigned long *ptc1, unsigned long data1) { extern void sn2_ptc_deadlock_recovery_core(volatile unsigned long *, unsigned long, volatile unsigned long *, unsigned long, volatile unsigned long *, unsigned long); - int cnode, mycnode, nasid; - volatile unsigned long *piows; - volatile unsigned long zeroval; + short nasid, i; + unsigned long *piows, zeroval; - sn2_ptc_deadlock_count++; + __get_cpu_var(ptcstats).deadlocks++; - piows = pda->pio_write_status_addr; + piows = (unsigned long *) pda->pio_write_status_addr; zeroval = pda->pio_write_status_val; - mycnode = numa_node_id(); - - for_each_online_node(cnode) { - if (is_headless_node(cnode) || cnode == mycnode) + for (i=0; i < nix; i++) { + nasid = nasids[i]; + if (!(sn2_ptctest & 3) && nasid == mynasid) continue; - nasid = cnodeid_to_nasid(cnode); ptc0 = CHANGE_NASID(nasid, ptc0); if (ptc1) ptc1 = CHANGE_NASID(nasid, ptc1); sn2_ptc_deadlock_recovery_core(ptc0, data0, ptc1, data1, piows, zeroval); } + } /** @@ -293,3 +413,93 @@ void sn2_send_IPI(int cpuid, int vector, int delivery_mode, int redirect) sn_send_IPI_phys(nasid, physid, vector, delivery_mode); } + +#ifdef CONFIG_PROC_FS + +#define PTC_BASENAME "sgi_sn/ptc_statistics" + +static void *sn2_ptc_seq_start(struct seq_file *file, loff_t * offset) +{ + if (*offset < NR_CPUS) + return offset; + return NULL; +} + +static void *sn2_ptc_seq_next(struct seq_file *file, void *data, loff_t * offset) +{ + (*offset)++; + if (*offset < NR_CPUS) + return offset; + return NULL; +} + +static void sn2_ptc_seq_stop(struct seq_file *file, void *data) +{ +} + +static int sn2_ptc_seq_show(struct seq_file *file, void *data) +{ + struct ptc_stats *stat; + int cpu; + + cpu = *(loff_t *) data; + + if (!cpu) { + seq_printf(file, "# ptc_l change_rid shub_ptc_flushes shub_nodes_flushed deadlocks lock_nsec shub_nsec shub_nsec_max\n"); + seq_printf(file, "# ptctest %d\n", sn2_ptctest); + } + + if (cpu < NR_CPUS && cpu_online(cpu)) { + stat = &per_cpu(ptcstats, cpu); + seq_printf(file, "cpu %d %ld %ld %ld %ld %ld %ld %ld %ld\n", cpu, stat->ptc_l, + stat->change_rid, stat->shub_ptc_flushes, stat->nodes_flushed, + stat->deadlocks, + 1000 * stat->lock_itc_clocks / per_cpu(cpu_info, cpu).cyc_per_usec, + 1000 * stat->shub_itc_clocks / per_cpu(cpu_info, cpu).cyc_per_usec, + 1000 * stat->shub_itc_clocks_max / per_cpu(cpu_info, cpu).cyc_per_usec); + } + + return 0; +} + +static struct seq_operations sn2_ptc_seq_ops = { + .start = sn2_ptc_seq_start, + .next = sn2_ptc_seq_next, + .stop = sn2_ptc_seq_stop, + .show = sn2_ptc_seq_show +}; + +int sn2_ptc_proc_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &sn2_ptc_seq_ops); +} + +static struct file_operations proc_sn2_ptc_operations = { + .open = sn2_ptc_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +static struct proc_dir_entry *proc_sn2_ptc; + +static int __init sn2_ptc_init(void) +{ + if (!(proc_sn2_ptc = create_proc_entry(PTC_BASENAME, 0444, NULL))) { + printk(KERN_ERR "unable to create %s proc entry", PTC_BASENAME); + return -EINVAL; + } + proc_sn2_ptc->proc_fops = &proc_sn2_ptc_operations; + spin_lock_init(&sn2_global_ptc_lock); + return 0; +} + +static void __exit sn2_ptc_exit(void) +{ + remove_proc_entry(PTC_BASENAME, NULL); +} + +module_init(sn2_ptc_init); +module_exit(sn2_ptc_exit); +#endif /* CONFIG_PROC_FS */ + diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c index 833e700fdac9..0513aacac8c1 100644 --- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c +++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c @@ -36,7 +36,6 @@ #include <asm/topology.h> #include <asm/smp.h> #include <asm/semaphore.h> -#include <asm/segment.h> #include <asm/uaccess.h> #include <asm/sal.h> #include <asm/sn/io.h> @@ -59,7 +58,7 @@ static int sn_hwperf_enum_objects(int *nobj, struct sn_hwperf_object_info **ret) struct sn_hwperf_object_info *objbuf = NULL; if ((e = sn_hwperf_init()) < 0) { - printk("sn_hwperf_init failed: err %d\n", e); + printk(KERN_ERR "sn_hwperf_init failed: err %d\n", e); goto out; } @@ -111,7 +110,7 @@ static int sn_hwperf_geoid_to_cnode(char *location) if (sn_hwperf_location_to_bpos(location, &rack, &bay, &slot, &slab)) return -1; - for (cnode = 0; cnode < numionodes; cnode++) { + for_each_node(cnode) { geoid = cnodeid_get_geoid(cnode); module_id = geo_module(geoid); this_rack = MODULE_GET_RACK(module_id); @@ -124,11 +123,13 @@ static int sn_hwperf_geoid_to_cnode(char *location) } } - return cnode < numionodes ? cnode : -1; + return node_possible(cnode) ? cnode : -1; } static int sn_hwperf_obj_to_cnode(struct sn_hwperf_object_info * obj) { + if (!SN_HWPERF_IS_NODE(obj) && !SN_HWPERF_IS_IONODE(obj)) + BUG(); if (!obj->sn_hwp_this_part) return -1; return sn_hwperf_geoid_to_cnode(obj->location); @@ -174,31 +175,199 @@ static const char *sn_hwperf_get_slabname(struct sn_hwperf_object_info *obj, return slabname; } -static void print_pci_topology(struct seq_file *s, - struct sn_hwperf_object_info *obj, int *ordinal, - u64 rack, u64 bay, u64 slot, u64 slab) +static void print_pci_topology(struct seq_file *s) +{ + char *p; + size_t sz; + int e; + + for (sz = PAGE_SIZE; sz < 16 * PAGE_SIZE; sz += PAGE_SIZE) { + if (!(p = (char *)kmalloc(sz, GFP_KERNEL))) + break; + e = ia64_sn_ioif_get_pci_topology(__pa(p), sz); + if (e == SALRET_OK) + seq_puts(s, p); + kfree(p); + if (e == SALRET_OK || e == SALRET_NOT_IMPLEMENTED) + break; + } +} + +static inline int sn_hwperf_has_cpus(cnodeid_t node) +{ + return node_online(node) && nr_cpus_node(node); +} + +static inline int sn_hwperf_has_mem(cnodeid_t node) +{ + return node_online(node) && NODE_DATA(node)->node_present_pages; +} + +static struct sn_hwperf_object_info * +sn_hwperf_findobj_id(struct sn_hwperf_object_info *objbuf, + int nobj, int id) { - char *p1; - char *p2; - char *pg; - - if (!(pg = (char *)get_zeroed_page(GFP_KERNEL))) - return; /* ignore */ - if (ia64_sn_ioif_get_pci_topology(rack, bay, slot, slab, - __pa(pg), PAGE_SIZE) == SN_HWPERF_OP_OK) { - for (p1=pg; *p1 && p1 < pg + PAGE_SIZE;) { - if (!(p2 = strchr(p1, '\n'))) + int i; + struct sn_hwperf_object_info *p = objbuf; + + for (i=0; i < nobj; i++, p++) { + if (p->id == id) + return p; + } + + return NULL; + +} + +static int sn_hwperf_get_nearest_node_objdata(struct sn_hwperf_object_info *objbuf, + int nobj, cnodeid_t node, cnodeid_t *near_mem_node, cnodeid_t *near_cpu_node) +{ + int e; + struct sn_hwperf_object_info *nodeobj = NULL; + struct sn_hwperf_object_info *op; + struct sn_hwperf_object_info *dest; + struct sn_hwperf_object_info *router; + struct sn_hwperf_port_info ptdata[16]; + int sz, i, j; + cnodeid_t c; + int found_mem = 0; + int found_cpu = 0; + + if (!node_possible(node)) + return -EINVAL; + + if (sn_hwperf_has_cpus(node)) { + if (near_cpu_node) + *near_cpu_node = node; + found_cpu++; + } + + if (sn_hwperf_has_mem(node)) { + if (near_mem_node) + *near_mem_node = node; + found_mem++; + } + + if (found_cpu && found_mem) + return 0; /* trivially successful */ + + /* find the argument node object */ + for (i=0, op=objbuf; i < nobj; i++, op++) { + if (!SN_HWPERF_IS_NODE(op) && !SN_HWPERF_IS_IONODE(op)) + continue; + if (node == sn_hwperf_obj_to_cnode(op)) { + nodeobj = op; + break; + } + } + if (!nodeobj) { + e = -ENOENT; + goto err; + } + + /* get it's interconnect topology */ + sz = op->ports * sizeof(struct sn_hwperf_port_info); + if (sz > sizeof(ptdata)) + BUG(); + e = ia64_sn_hwperf_op(sn_hwperf_master_nasid, + SN_HWPERF_ENUM_PORTS, nodeobj->id, sz, + (u64)&ptdata, 0, 0, NULL); + if (e != SN_HWPERF_OP_OK) { + e = -EINVAL; + goto err; + } + + /* find nearest node with cpus and nearest memory */ + for (router=NULL, j=0; j < op->ports; j++) { + dest = sn_hwperf_findobj_id(objbuf, nobj, ptdata[j].conn_id); + if (!dest || SN_HWPERF_FOREIGN(dest) || + !SN_HWPERF_IS_NODE(dest) || SN_HWPERF_IS_IONODE(dest)) { + continue; + } + c = sn_hwperf_obj_to_cnode(dest); + if (!found_cpu && sn_hwperf_has_cpus(c)) { + if (near_cpu_node) + *near_cpu_node = c; + found_cpu++; + } + if (!found_mem && sn_hwperf_has_mem(c)) { + if (near_mem_node) + *near_mem_node = c; + found_mem++; + } + if (SN_HWPERF_IS_ROUTER(dest)) + router = dest; + } + + if (router && (!found_cpu || !found_mem)) { + /* search for a node connected to the same router */ + sz = router->ports * sizeof(struct sn_hwperf_port_info); + if (sz > sizeof(ptdata)) + BUG(); + e = ia64_sn_hwperf_op(sn_hwperf_master_nasid, + SN_HWPERF_ENUM_PORTS, router->id, sz, + (u64)&ptdata, 0, 0, NULL); + if (e != SN_HWPERF_OP_OK) { + e = -EINVAL; + goto err; + } + for (j=0; j < router->ports; j++) { + dest = sn_hwperf_findobj_id(objbuf, nobj, + ptdata[j].conn_id); + if (!dest || dest->id == node || + SN_HWPERF_FOREIGN(dest) || + !SN_HWPERF_IS_NODE(dest) || + SN_HWPERF_IS_IONODE(dest)) { + continue; + } + c = sn_hwperf_obj_to_cnode(dest); + if (!found_cpu && sn_hwperf_has_cpus(c)) { + if (near_cpu_node) + *near_cpu_node = c; + found_cpu++; + } + if (!found_mem && sn_hwperf_has_mem(c)) { + if (near_mem_node) + *near_mem_node = c; + found_mem++; + } + if (found_cpu && found_mem) + break; + } + } + + if (!found_cpu || !found_mem) { + /* resort to _any_ node with CPUs and memory */ + for (i=0, op=objbuf; i < nobj; i++, op++) { + if (SN_HWPERF_FOREIGN(op) || + SN_HWPERF_IS_IONODE(op) || + !SN_HWPERF_IS_NODE(op)) { + continue; + } + c = sn_hwperf_obj_to_cnode(op); + if (!found_cpu && sn_hwperf_has_cpus(c)) { + if (near_cpu_node) + *near_cpu_node = c; + found_cpu++; + } + if (!found_mem && sn_hwperf_has_mem(c)) { + if (near_mem_node) + *near_mem_node = c; + found_mem++; + } + if (found_cpu && found_mem) break; - *p2 = '\0'; - seq_printf(s, "pcibus %d %s-%s\n", - *ordinal, obj->location, p1); - (*ordinal)++; - p1 = p2 + 1; } } - free_page((unsigned long)pg); + + if (!found_cpu || !found_mem) + e = -ENODATA; + +err: + return e; } + static int sn_topology_show(struct seq_file *s, void *d) { int sz; @@ -215,7 +384,6 @@ static int sn_topology_show(struct seq_file *s, void *d) struct sn_hwperf_object_info *p; struct sn_hwperf_object_info *obj = d; /* this object */ struct sn_hwperf_object_info *objs = s->private; /* all objects */ - int rack, bay, slot, slab; u8 shubtype; u8 system_size; u8 sharing_size; @@ -225,7 +393,6 @@ static int sn_topology_show(struct seq_file *s, void *d) u8 region_size; u16 nasid_mask; int nasid_msb; - int pci_bus_ordinal = 0; if (obj == objs) { seq_printf(s, "# sn_topology version 2\n"); @@ -253,6 +420,8 @@ static int sn_topology_show(struct seq_file *s, void *d) shubtype ? "shub2" : "shub1", (u64)nasid_mask << nasid_shift, nasid_msb, nasid_shift, system_size, sharing_size, coher, region_size); + + print_pci_topology(s); } if (SN_HWPERF_FOREIGN(obj)) { @@ -272,11 +441,24 @@ static int sn_topology_show(struct seq_file *s, void *d) if (!SN_HWPERF_IS_NODE(obj) && !SN_HWPERF_IS_IONODE(obj)) seq_putc(s, '\n'); else { + cnodeid_t near_mem = -1; + cnodeid_t near_cpu = -1; + seq_printf(s, ", nasid 0x%x", cnodeid_to_nasid(ordinal)); - for (i=0; i < numionodes; i++) { - seq_printf(s, i ? ":%d" : ", dist %d", - node_distance(ordinal, i)); + + if (sn_hwperf_get_nearest_node_objdata(objs, sn_hwperf_obj_cnt, + ordinal, &near_mem, &near_cpu) == 0) { + seq_printf(s, ", near_mem_nodeid %d, near_cpu_nodeid %d", + near_mem, near_cpu); + } + + if (!SN_HWPERF_IS_IONODE(obj)) { + for_each_online_node(i) { + seq_printf(s, i ? ":%d" : ", dist %d", + node_distance(ordinal, i)); + } } + seq_putc(s, '\n'); /* @@ -300,17 +482,6 @@ static int sn_topology_show(struct seq_file *s, void *d) seq_putc(s, '\n'); } } - - /* - * PCI busses attached to this node, if any - */ - if (sn_hwperf_location_to_bpos(obj->location, - &rack, &bay, &slot, &slab)) { - /* export pci bus info */ - print_pci_topology(s, obj, &pci_bus_ordinal, - rack, bay, slot, slab); - - } } if (obj->ports) { @@ -572,6 +743,8 @@ sn_hwperf_ioctl(struct inode *in, struct file *fp, u32 op, u64 arg) if ((r = sn_hwperf_enum_objects(&nobj, &objs)) == 0) { memset(p, 0, a.sz); for (i = 0; i < nobj; i++) { + if (!SN_HWPERF_IS_NODE(objs + i)) + continue; node = sn_hwperf_obj_to_cnode(objs + i); for_each_online_cpu(j) { if (node != cpu_to_node(j)) @@ -598,7 +771,7 @@ sn_hwperf_ioctl(struct inode *in, struct file *fp, u32 op, u64 arg) case SN_HWPERF_GET_NODE_NASID: if (a.sz != sizeof(u64) || - (node = a.arg) < 0 || node >= numionodes) { + (node = a.arg) < 0 || !node_possible(node)) { r = -EINVAL; goto error; } @@ -627,6 +800,14 @@ sn_hwperf_ioctl(struct inode *in, struct file *fp, u32 op, u64 arg) vfree(objs); goto error; } + + if (!SN_HWPERF_IS_NODE(objs + i) && + !SN_HWPERF_IS_IONODE(objs + i)) { + r = -ENOENT; + vfree(objs); + goto error; + } + *(u64 *)p = (u64)sn_hwperf_obj_to_cnode(objs + i); vfree(objs); } @@ -692,6 +873,7 @@ static int sn_hwperf_init(void) /* single threaded, once-only initialization */ down(&sn_hwperf_init_mutex); + if (sn_hwperf_salheap) { up(&sn_hwperf_init_mutex); return e; @@ -742,19 +924,6 @@ out: sn_hwperf_salheap = NULL; sn_hwperf_obj_cnt = 0; } - - if (!e) { - /* - * Register a dynamic misc device for ioctl. Platforms - * supporting hotplug will create /dev/sn_hwperf, else - * user can to look up the minor number in /proc/misc. - */ - if ((e = misc_register(&sn_hwperf_dev)) != 0) { - printk(KERN_ERR "sn_hwperf_init: misc register " - "for \"sn_hwperf\" failed, err %d\n", e); - } - } - up(&sn_hwperf_init_mutex); return e; } @@ -782,3 +951,41 @@ int sn_topology_release(struct inode *inode, struct file *file) vfree(seq->private); return seq_release(inode, file); } + +int sn_hwperf_get_nearest_node(cnodeid_t node, + cnodeid_t *near_mem_node, cnodeid_t *near_cpu_node) +{ + int e; + int nobj; + struct sn_hwperf_object_info *objbuf; + + if ((e = sn_hwperf_enum_objects(&nobj, &objbuf)) == 0) { + e = sn_hwperf_get_nearest_node_objdata(objbuf, nobj, + node, near_mem_node, near_cpu_node); + vfree(objbuf); + } + + return e; +} + +static int __devinit sn_hwperf_misc_register_init(void) +{ + int e; + + sn_hwperf_init(); + + /* + * Register a dynamic misc device for hwperf ioctls. Platforms + * supporting hotplug will create /dev/sn_hwperf, else user + * can to look up the minor number in /proc/misc. + */ + if ((e = misc_register(&sn_hwperf_dev)) != 0) { + printk(KERN_ERR "sn_hwperf_misc_register_init: failed to " + "register misc device for \"%s\"\n", sn_hwperf_dev.name); + } + + return e; +} + +device_initcall(sn_hwperf_misc_register_init); /* after misc_init() */ +EXPORT_SYMBOL(sn_hwperf_get_nearest_node); diff --git a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c index 6a80fca807b9..a06719d752a0 100644 --- a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c +++ b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved. */ #include <linux/config.h> #include <asm/uaccess.h> @@ -15,7 +15,7 @@ static int partition_id_show(struct seq_file *s, void *p) { - seq_printf(s, "%d\n", sn_local_partid()); + seq_printf(s, "%d\n", sn_partition_id); return 0; } @@ -52,7 +52,7 @@ static int licenseID_open(struct inode *inode, struct file *file) * the bridge chip. The hardware will then send an interrupt message if the * interrupt line is active. This mimics a level sensitive interrupt. */ -int sn_force_interrupt_flag = 1; +extern int sn_force_interrupt_flag; static int sn_force_interrupt_show(struct seq_file *s, void *p) { diff --git a/arch/ia64/sn/kernel/sn2/timer_interrupt.c b/arch/ia64/sn/kernel/sn2/timer_interrupt.c index cde7375390b0..adf5db2e2afe 100644 --- a/arch/ia64/sn/kernel/sn2/timer_interrupt.c +++ b/arch/ia64/sn/kernel/sn2/timer_interrupt.c @@ -1,7 +1,7 @@ /* * * - * Copyright (c) 2003 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2005 Silicon Graphics, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License @@ -50,14 +50,16 @@ void sn_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) LED_CPU_HEARTBEAT, LED_CPU_HEARTBEAT); } - if (enable_shub_wars_1_1()) { - /* Bugfix code for SHUB 1.1 */ - if (pda->pio_shub_war_cam_addr) - *pda->pio_shub_war_cam_addr = 0x8000000000000010UL; + if (is_shub1()) { + if (enable_shub_wars_1_1()) { + /* Bugfix code for SHUB 1.1 */ + if (pda->pio_shub_war_cam_addr) + *pda->pio_shub_war_cam_addr = 0x8000000000000010UL; + } + if (pda->sn_lb_int_war_ticks == 0) + sn_lb_int_war_check(); + pda->sn_lb_int_war_ticks++; + if (pda->sn_lb_int_war_ticks >= SN_LB_INT_WAR_INTERVAL) + pda->sn_lb_int_war_ticks = 0; } - if (pda->sn_lb_int_war_ticks == 0) - sn_lb_int_war_check(); - pda->sn_lb_int_war_ticks++; - if (pda->sn_lb_int_war_ticks >= SN_LB_INT_WAR_INTERVAL) - pda->sn_lb_int_war_ticks = 0; } diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index 254fe15c064b..b45db5133f55 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -191,7 +191,7 @@ cx_device_register(nasid_t nasid, int part_num, int mfg_num, { struct cx_dev *cx_dev; - cx_dev = kcalloc(1, sizeof(struct cx_dev), GFP_KERNEL); + cx_dev = kzalloc(sizeof(struct cx_dev), GFP_KERNEL); DBG("cx_dev= 0x%p\n", cx_dev); if (cx_dev == NULL) return -ENOMEM; diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index bb1d5cf30440..ed7c21586e98 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -885,6 +885,10 @@ xpc_init(void) pid_t pid; + if (!ia64_platform_is("sn2")) { + return -ENODEV; + } + /* * xpc_remote_copy_buffer is used as a temporary buffer for bte_copy'ng * both a partition's reserved page and its XPC variables. Its size was diff --git a/arch/ia64/sn/kernel/xpnet.c b/arch/ia64/sn/kernel/xpnet.c index 78c13d676fa6..e5c6d3c0a8e9 100644 --- a/arch/ia64/sn/kernel/xpnet.c +++ b/arch/ia64/sn/kernel/xpnet.c @@ -130,7 +130,7 @@ struct net_device *xpnet_device; */ static u64 xpnet_broadcast_partitions; /* protect above */ -static spinlock_t xpnet_broadcast_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(xpnet_broadcast_lock); /* * Since the Block Transfer Engine (BTE) is being used for the transfer @@ -636,6 +636,10 @@ xpnet_init(void) int result = -ENOMEM; + if (!ia64_platform_is("sn2")) { + return -ENODEV; + } + dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME); /* diff --git a/arch/ia64/sn/pci/Makefile b/arch/ia64/sn/pci/Makefile index 2f915bce25f9..321576b1b425 100644 --- a/arch/ia64/sn/pci/Makefile +++ b/arch/ia64/sn/pci/Makefile @@ -7,4 +7,4 @@ # # Makefile for the sn pci general routines. -obj-y := pci_dma.o tioca_provider.o pcibr/ +obj-y := pci_dma.o tioca_provider.o tioce_provider.o pcibr/ diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c index b058dc2a0b9d..34093476e965 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001-2004 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2001-2005 Silicon Graphics, Inc. All rights reserved. */ #include <linux/types.h> @@ -215,8 +215,8 @@ void sn_dma_flush(uint64_t addr) int is_tio; int wid_num; int i, j; - int bwin; uint64_t flags; + uint64_t itte; struct hubdev_info *hubinfo; volatile struct sn_flush_device_list *p; struct sn_flush_nasid_entry *flush_nasid_list; @@ -233,31 +233,36 @@ void sn_dma_flush(uint64_t addr) if (!hubinfo) { BUG(); } - is_tio = (nasid & 1); - if (is_tio) { - wid_num = TIO_SWIN_WIDGETNUM(addr); - bwin = TIO_BWIN_WINDOWNUM(addr); - } else { - wid_num = SWIN_WIDGETNUM(addr); - bwin = BWIN_WINDOWNUM(addr); - } flush_nasid_list = &hubinfo->hdi_flush_nasid_list; if (flush_nasid_list->widget_p == NULL) return; - if (bwin > 0) { - uint64_t itte = flush_nasid_list->iio_itte[bwin]; - if (is_tio) { - wid_num = (itte >> TIO_ITTE_WIDGET_SHIFT) & - TIO_ITTE_WIDGET_MASK; - } else { - wid_num = (itte >> IIO_ITTE_WIDGET_SHIFT) & - IIO_ITTE_WIDGET_MASK; - } + is_tio = (nasid & 1); + if (is_tio) { + int itte_index; + + if (TIO_HWIN(addr)) + itte_index = 0; + else if (TIO_BWIN_WINDOWNUM(addr)) + itte_index = TIO_BWIN_WINDOWNUM(addr); + else + itte_index = -1; + + if (itte_index >= 0) { + itte = flush_nasid_list->iio_itte[itte_index]; + if (! TIO_ITTE_VALID(itte)) + return; + wid_num = TIO_ITTE_WIDGET(itte); + } else + wid_num = TIO_SWIN_WIDGETNUM(addr); + } else { + if (BWIN_WINDOWNUM(addr)) { + itte = flush_nasid_list->iio_itte[BWIN_WINDOWNUM(addr)]; + wid_num = IIO_ITTE_WIDGET(itte); + } else + wid_num = SWIN_WIDGETNUM(addr); } - if (flush_nasid_list->widget_p == NULL) - return; if (flush_nasid_list->widget_p[wid_num] == NULL) return; p = &flush_nasid_list->widget_p[wid_num][0]; @@ -283,10 +288,16 @@ void sn_dma_flush(uint64_t addr) /* * For TIOCP use the Device(x) Write Request Buffer Flush Bridge * register since it ensures the data has entered the coherence - * domain, unlike PIC + * domain, unlike PIC. */ if (is_tio) { - uint32_t tio_id = REMOTE_HUB_L(nasid, TIO_NODE_ID); + /* + * Note: devices behind TIOCE should never be matched in the + * above code, and so the following code is PIC/CP centric. + * If CE ever needs the sn_dma_flush mechanism, we will have + * to account for that here and in tioce_bus_fixup(). + */ + uint32_t tio_id = HUB_L(TIO_IOSPACE_ADDR(nasid, TIO_NODE_ID)); uint32_t revnum = XWIDGET_PART_REV_NUM(tio_id); /* TIOCP BRINGUP WAR (PV907516): Don't write buffer flush reg */ @@ -306,7 +317,8 @@ void sn_dma_flush(uint64_t addr) *(volatile uint32_t *)(p->sfdl_force_int_addr) = 1; /* wait for the interrupt to come back. */ - while (*(p->sfdl_flush_addr) != 0x10f) ; + while (*(p->sfdl_flush_addr) != 0x10f) + cpu_relax(); /* okay, everything is synched up. */ spin_unlock_irqrestore((spinlock_t *)&p->sfdl_flush_lock, flags); diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c index b95e928636a1..7b03b8084ffc 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c @@ -15,6 +15,7 @@ #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/pcidev.h> #include <asm/sn/sn_sal.h> +#include <asm/sn/sn2/sn_hwperf.h> #include "xtalk/xwidgetdev.h" #include "xtalk/hubdev.h" @@ -60,7 +61,7 @@ static int sal_pcibr_error_interrupt(struct pcibus_info *soft) ret_stuff.status = 0; ret_stuff.v0 = 0; - segment = 0; + segment = soft->pbi_buscommon.bs_persist_segment; busnum = soft->pbi_buscommon.bs_persist_busnum; SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_ERROR_INTERRUPT, @@ -88,6 +89,7 @@ void * pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller) { int nasid, cnode, j; + cnodeid_t near_cnode; struct hubdev_info *hubdev_info; struct pcibus_info *soft; struct sn_flush_device_list *sn_flush_device_list; @@ -115,7 +117,7 @@ pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont /* * register the bridge's error interrupt handler */ - if (request_irq(SGI_PCIBR_ERROR, (void *)pcibr_error_intr_handler, + if (request_irq(SGI_PCIASIC_ERROR, (void *)pcibr_error_intr_handler, SA_SHIRQ, "PCIBR error", (void *)(soft))) { printk(KERN_WARNING "pcibr cannot allocate interrupt for error handler\n"); @@ -142,9 +144,12 @@ pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont j++, sn_flush_device_list++) { if (sn_flush_device_list->sfdl_slot == -1) continue; - if (sn_flush_device_list-> - sfdl_persistent_busnum == - soft->pbi_buscommon.bs_persist_busnum) + if ((sn_flush_device_list-> + sfdl_persistent_segment == + soft->pbi_buscommon.bs_persist_segment) && + (sn_flush_device_list-> + sfdl_persistent_busnum == + soft->pbi_buscommon.bs_persist_busnum)) sn_flush_device_list->sfdl_pcibus_info = soft; } @@ -158,12 +163,18 @@ pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont memset(soft->pbi_int_ate_resource.ate, 0, (soft->pbi_int_ate_size * sizeof(uint64_t))); - if (prom_bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP) - /* - * TIO PCI Bridge with no closest node information. - * FIXME: Find another way to determine the closest node - */ - controller->node = -1; + if (prom_bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP) { + /* TIO PCI Bridge: find nearest node with CPUs */ + int e = sn_hwperf_get_nearest_node(cnode, NULL, &near_cnode); + + if (e < 0) { + near_cnode = (cnodeid_t)-1; /* use any node */ + printk(KERN_WARNING "pcibr_bus_fixup: failed to find " + "near node with CPUs to TIO node %d, err=%d\n", + cnode, e); + } + controller->node = near_cnode; + } else controller->node = cnode; return soft; @@ -175,6 +186,9 @@ void pcibr_force_interrupt(struct sn_irq_info *sn_irq_info) struct pcibus_info *pcibus_info; int bit = sn_irq_info->irq_int_bit; + if (! sn_irq_info->irq_bridge) + return; + pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo; if (pcidev_info) { pcibus_info = @@ -184,7 +198,7 @@ void pcibr_force_interrupt(struct sn_irq_info *sn_irq_info) } } -void pcibr_change_devices_irq(struct sn_irq_info *sn_irq_info) +void pcibr_target_interrupt(struct sn_irq_info *sn_irq_info) { struct pcidev_info *pcidev_info; struct pcibus_info *pcibus_info; @@ -219,6 +233,8 @@ struct sn_pcibus_provider pcibr_provider = { .dma_map_consistent = pcibr_dma_map_consistent, .dma_unmap = pcibr_dma_unmap, .bus_fixup = pcibr_bus_fixup, + .force_interrupt = pcibr_force_interrupt, + .target_interrupt = pcibr_target_interrupt }; int diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c index 5d76a7581465..19bced34d5f1 100644 --- a/arch/ia64/sn/pci/tioca_provider.c +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -148,7 +148,7 @@ tioca_gart_init(struct tioca_kernel *tioca_kern) tioca_kern->ca_pcigart_entries = tioca_kern->ca_pciap_size / tioca_kern->ca_ap_pagesize; tioca_kern->ca_pcigart_pagemap = - kcalloc(1, tioca_kern->ca_pcigart_entries / 8, GFP_KERNEL); + kzalloc(tioca_kern->ca_pcigart_entries / 8, GFP_KERNEL); if (!tioca_kern->ca_pcigart_pagemap) { free_pages((unsigned long)tioca_kern->ca_gart, get_order(tioca_kern->ca_gart_size)); @@ -392,7 +392,7 @@ tioca_dma_mapped(struct pci_dev *pdev, uint64_t paddr, size_t req_size) * allocate a map struct */ - ca_dmamap = kcalloc(1, sizeof(struct tioca_dmamap), GFP_ATOMIC); + ca_dmamap = kzalloc(sizeof(struct tioca_dmamap), GFP_ATOMIC); if (!ca_dmamap) goto map_return; @@ -559,7 +559,7 @@ tioca_error_intr_handler(int irq, void *arg, struct pt_regs *pt) ret_stuff.status = 0; ret_stuff.v0 = 0; - segment = 0; + segment = soft->ca_common.bs_persist_segment; busnum = soft->ca_common.bs_persist_busnum; SAL_CALL_NOLOCK(ret_stuff, @@ -600,7 +600,7 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont * Allocate kernel bus soft and copy from prom. */ - tioca_common = kcalloc(1, sizeof(struct tioca_common), GFP_KERNEL); + tioca_common = kzalloc(sizeof(struct tioca_common), GFP_KERNEL); if (!tioca_common) return NULL; @@ -609,7 +609,7 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont /* init kernel-private area */ - tioca_kern = kcalloc(1, sizeof(struct tioca_kernel), GFP_KERNEL); + tioca_kern = kzalloc(sizeof(struct tioca_kernel), GFP_KERNEL); if (!tioca_kern) { kfree(tioca_common); return NULL; @@ -622,7 +622,8 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont nasid_to_cnodeid(tioca_common->ca_closest_nasid); tioca_common->ca_kernel_private = (uint64_t) tioca_kern; - bus = pci_find_bus(0, tioca_common->ca_common.bs_persist_busnum); + bus = pci_find_bus(tioca_common->ca_common.bs_persist_segment, + tioca_common->ca_common.bs_persist_busnum); BUG_ON(!bus); tioca_kern->ca_devices = &bus->devices; @@ -656,6 +657,8 @@ static struct sn_pcibus_provider tioca_pci_interfaces = { .dma_map_consistent = tioca_dma_map, .dma_unmap = tioca_dma_unmap, .bus_fixup = tioca_bus_fixup, + .force_interrupt = NULL, + .target_interrupt = NULL }; /** diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c new file mode 100644 index 000000000000..8e75db2b825d --- /dev/null +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -0,0 +1,771 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003-2005 Silicon Graphics, Inc. All Rights Reserved. + */ + +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <asm/sn/sn_sal.h> +#include <asm/sn/addrs.h> +#include <asm/sn/pcidev.h> +#include <asm/sn/pcibus_provider_defs.h> +#include <asm/sn/tioce_provider.h> + +/** + * Bus address ranges for the 5 flavors of TIOCE DMA + */ + +#define TIOCE_D64_MIN 0x8000000000000000UL +#define TIOCE_D64_MAX 0xffffffffffffffffUL +#define TIOCE_D64_ADDR(a) ((a) >= TIOCE_D64_MIN) + +#define TIOCE_D32_MIN 0x0000000080000000UL +#define TIOCE_D32_MAX 0x00000000ffffffffUL +#define TIOCE_D32_ADDR(a) ((a) >= TIOCE_D32_MIN && (a) <= TIOCE_D32_MAX) + +#define TIOCE_M32_MIN 0x0000000000000000UL +#define TIOCE_M32_MAX 0x000000007fffffffUL +#define TIOCE_M32_ADDR(a) ((a) >= TIOCE_M32_MIN && (a) <= TIOCE_M32_MAX) + +#define TIOCE_M40_MIN 0x0000004000000000UL +#define TIOCE_M40_MAX 0x0000007fffffffffUL +#define TIOCE_M40_ADDR(a) ((a) >= TIOCE_M40_MIN && (a) <= TIOCE_M40_MAX) + +#define TIOCE_M40S_MIN 0x0000008000000000UL +#define TIOCE_M40S_MAX 0x000000ffffffffffUL +#define TIOCE_M40S_ADDR(a) ((a) >= TIOCE_M40S_MIN && (a) <= TIOCE_M40S_MAX) + +/* + * ATE manipulation macros. + */ + +#define ATE_PAGESHIFT(ps) (__ffs(ps)) +#define ATE_PAGEMASK(ps) ((ps)-1) + +#define ATE_PAGE(x, ps) ((x) >> ATE_PAGESHIFT(ps)) +#define ATE_NPAGES(start, len, pagesize) \ + (ATE_PAGE((start)+(len)-1, pagesize) - ATE_PAGE(start, pagesize) + 1) + +#define ATE_VALID(ate) ((ate) & (1UL << 63)) +#define ATE_MAKE(addr, ps) (((addr) & ~ATE_PAGEMASK(ps)) | (1UL << 63)) + +/* + * Flavors of ate-based mapping supported by tioce_alloc_map() + */ + +#define TIOCE_ATE_M32 1 +#define TIOCE_ATE_M40 2 +#define TIOCE_ATE_M40S 3 + +#define KB(x) ((x) << 10) +#define MB(x) ((x) << 20) +#define GB(x) ((x) << 30) + +/** + * tioce_dma_d64 - create a DMA mapping using 64-bit direct mode + * @ct_addr: system coretalk address + * + * Map @ct_addr into 64-bit CE bus space. No device context is necessary + * and no CE mapping are consumed. + * + * Bits 53:0 come from the coretalk address. The remaining bits are set as + * follows: + * + * 63 - must be 1 to indicate d64 mode to CE hardware + * 62 - barrier bit ... controlled with tioce_dma_barrier() + * 61 - 0 since this is not an MSI transaction + * 60:54 - reserved, MBZ + */ +static uint64_t +tioce_dma_d64(unsigned long ct_addr) +{ + uint64_t bus_addr; + + bus_addr = ct_addr | (1UL << 63); + + return bus_addr; +} + +/** + * pcidev_to_tioce - return misc ce related pointers given a pci_dev + * @pci_dev: pci device context + * @base: ptr to store struct tioce_mmr * for the CE holding this device + * @kernel: ptr to store struct tioce_kernel * for the CE holding this device + * @port: ptr to store the CE port number that this device is on + * + * Return pointers to various CE-related structures for the CE upstream of + * @pci_dev. + */ +static inline void +pcidev_to_tioce(struct pci_dev *pdev, struct tioce **base, + struct tioce_kernel **kernel, int *port) +{ + struct pcidev_info *pcidev_info; + struct tioce_common *ce_common; + struct tioce_kernel *ce_kernel; + + pcidev_info = SN_PCIDEV_INFO(pdev); + ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; + ce_kernel = (struct tioce_kernel *)ce_common->ce_kernel_private; + + if (base) + *base = (struct tioce *)ce_common->ce_pcibus.bs_base; + if (kernel) + *kernel = ce_kernel; + + /* + * we use port as a zero-based value internally, even though the + * documentation is 1-based. + */ + if (port) + *port = + (pdev->bus->number < ce_kernel->ce_port1_secondary) ? 0 : 1; +} + +/** + * tioce_alloc_map - Given a coretalk address, map it to pcie bus address + * space using one of the various ATE-based address modes. + * @ce_kern: tioce context + * @type: map mode to use + * @port: 0-based port that the requesting device is downstream of + * @ct_addr: the coretalk address to map + * @len: number of bytes to map + * + * Given the addressing type, set up various paramaters that define the + * ATE pool to use. Search for a contiguous block of entries to cover the + * length, and if enough resources exist, fill in the ATE's and construct a + * tioce_dmamap struct to track the mapping. + */ +static uint64_t +tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port, + uint64_t ct_addr, int len) +{ + int i; + int j; + int first; + int last; + int entries; + int nates; + int pagesize; + uint64_t *ate_shadow; + uint64_t *ate_reg; + uint64_t addr; + struct tioce *ce_mmr; + uint64_t bus_base; + struct tioce_dmamap *map; + + ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base; + + switch (type) { + case TIOCE_ATE_M32: + /* + * The first 64 entries of the ate3240 pool are dedicated to + * super-page (TIOCE_ATE_M40S) mode. + */ + first = 64; + entries = TIOCE_NUM_M3240_ATES - 64; + ate_shadow = ce_kern->ce_ate3240_shadow; + ate_reg = ce_mmr->ce_ure_ate3240; + pagesize = ce_kern->ce_ate3240_pagesize; + bus_base = TIOCE_M32_MIN; + break; + case TIOCE_ATE_M40: + first = 0; + entries = TIOCE_NUM_M40_ATES; + ate_shadow = ce_kern->ce_ate40_shadow; + ate_reg = ce_mmr->ce_ure_ate40; + pagesize = MB(64); + bus_base = TIOCE_M40_MIN; + break; + case TIOCE_ATE_M40S: + /* + * ate3240 entries 0-31 are dedicated to port1 super-page + * mappings. ate3240 entries 32-63 are dedicated to port2. + */ + first = port * 32; + entries = 32; + ate_shadow = ce_kern->ce_ate3240_shadow; + ate_reg = ce_mmr->ce_ure_ate3240; + pagesize = GB(16); + bus_base = TIOCE_M40S_MIN; + break; + default: + return 0; + } + + nates = ATE_NPAGES(ct_addr, len, pagesize); + if (nates > entries) + return 0; + + last = first + entries - nates; + for (i = first; i <= last; i++) { + if (ATE_VALID(ate_shadow[i])) + continue; + + for (j = i; j < i + nates; j++) + if (ATE_VALID(ate_shadow[j])) + break; + + if (j >= i + nates) + break; + } + + if (i > last) + return 0; + + map = kcalloc(1, sizeof(struct tioce_dmamap), GFP_ATOMIC); + if (!map) + return 0; + + addr = ct_addr; + for (j = 0; j < nates; j++) { + uint64_t ate; + + ate = ATE_MAKE(addr, pagesize); + ate_shadow[i + j] = ate; + ate_reg[i + j] = ate; + addr += pagesize; + } + + map->refcnt = 1; + map->nbytes = nates * pagesize; + map->ct_start = ct_addr & ~ATE_PAGEMASK(pagesize); + map->pci_start = bus_base + (i * pagesize); + map->ate_hw = &ate_reg[i]; + map->ate_shadow = &ate_shadow[i]; + map->ate_count = nates; + + list_add(&map->ce_dmamap_list, &ce_kern->ce_dmamap_list); + + return (map->pci_start + (ct_addr - map->ct_start)); +} + +/** + * tioce_dma_d32 - create a DMA mapping using 32-bit direct mode + * @pdev: linux pci_dev representing the function + * @paddr: system physical address + * + * Map @paddr into 32-bit bus space of the CE associated with @pcidev_info. + */ +static uint64_t +tioce_dma_d32(struct pci_dev *pdev, uint64_t ct_addr) +{ + int dma_ok; + int port; + struct tioce *ce_mmr; + struct tioce_kernel *ce_kern; + uint64_t ct_upper; + uint64_t ct_lower; + dma_addr_t bus_addr; + + ct_upper = ct_addr & ~0x3fffffffUL; + ct_lower = ct_addr & 0x3fffffffUL; + + pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port); + + if (ce_kern->ce_port[port].dirmap_refcnt == 0) { + volatile uint64_t tmp; + + ce_kern->ce_port[port].dirmap_shadow = ct_upper; + ce_mmr->ce_ure_dir_map[port] = ct_upper; + tmp = ce_mmr->ce_ure_dir_map[port]; + dma_ok = 1; + } else + dma_ok = (ce_kern->ce_port[port].dirmap_shadow == ct_upper); + + if (dma_ok) { + ce_kern->ce_port[port].dirmap_refcnt++; + bus_addr = TIOCE_D32_MIN + ct_lower; + } else + bus_addr = 0; + + return bus_addr; +} + +/** + * tioce_dma_barrier - swizzle a TIOCE bus address to include or exclude + * the barrier bit. + * @bus_addr: bus address to swizzle + * + * Given a TIOCE bus address, set the appropriate bit to indicate barrier + * attributes. + */ +static uint64_t +tioce_dma_barrier(uint64_t bus_addr, int on) +{ + uint64_t barrier_bit; + + /* barrier not supported in M40/M40S mode */ + if (TIOCE_M40_ADDR(bus_addr) || TIOCE_M40S_ADDR(bus_addr)) + return bus_addr; + + if (TIOCE_D64_ADDR(bus_addr)) + barrier_bit = (1UL << 62); + else /* must be m32 or d32 */ + barrier_bit = (1UL << 30); + + return (on) ? (bus_addr | barrier_bit) : (bus_addr & ~barrier_bit); +} + +/** + * tioce_dma_unmap - release CE mapping resources + * @pdev: linux pci_dev representing the function + * @bus_addr: bus address returned by an earlier tioce_dma_map + * @dir: mapping direction (unused) + * + * Locate mapping resources associated with @bus_addr and release them. + * For mappings created using the direct modes there are no resources + * to release. + */ +void +tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) +{ + int i; + int port; + struct tioce_kernel *ce_kern; + struct tioce *ce_mmr; + unsigned long flags; + + bus_addr = tioce_dma_barrier(bus_addr, 0); + pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port); + + /* nothing to do for D64 */ + + if (TIOCE_D64_ADDR(bus_addr)) + return; + + spin_lock_irqsave(&ce_kern->ce_lock, flags); + + if (TIOCE_D32_ADDR(bus_addr)) { + if (--ce_kern->ce_port[port].dirmap_refcnt == 0) { + ce_kern->ce_port[port].dirmap_shadow = 0; + ce_mmr->ce_ure_dir_map[port] = 0; + } + } else { + struct tioce_dmamap *map; + + list_for_each_entry(map, &ce_kern->ce_dmamap_list, + ce_dmamap_list) { + uint64_t last; + + last = map->pci_start + map->nbytes - 1; + if (bus_addr >= map->pci_start && bus_addr <= last) + break; + } + + if (&map->ce_dmamap_list == &ce_kern->ce_dmamap_list) { + printk(KERN_WARNING + "%s: %s - no map found for bus_addr 0x%lx\n", + __FUNCTION__, pci_name(pdev), bus_addr); + } else if (--map->refcnt == 0) { + for (i = 0; i < map->ate_count; i++) { + map->ate_shadow[i] = 0; + map->ate_hw[i] = 0; + } + + list_del(&map->ce_dmamap_list); + kfree(map); + } + } + + spin_unlock_irqrestore(&ce_kern->ce_lock, flags); +} + +/** + * tioce_do_dma_map - map pages for PCI DMA + * @pdev: linux pci_dev representing the function + * @paddr: host physical address to map + * @byte_count: bytes to map + * + * This is the main wrapper for mapping host physical pages to CE PCI space. + * The mapping mode used is based on the device's dma_mask. + */ +static uint64_t +tioce_do_dma_map(struct pci_dev *pdev, uint64_t paddr, size_t byte_count, + int barrier) +{ + unsigned long flags; + uint64_t ct_addr; + uint64_t mapaddr = 0; + struct tioce_kernel *ce_kern; + struct tioce_dmamap *map; + int port; + uint64_t dma_mask; + + dma_mask = (barrier) ? pdev->dev.coherent_dma_mask : pdev->dma_mask; + + /* cards must be able to address at least 31 bits */ + if (dma_mask < 0x7fffffffUL) + return 0; + + ct_addr = PHYS_TO_TIODMA(paddr); + + /* + * If the device can generate 64 bit addresses, create a D64 map. + * Since this should never fail, bypass the rest of the checks. + */ + if (dma_mask == ~0UL) { + mapaddr = tioce_dma_d64(ct_addr); + goto dma_map_done; + } + + pcidev_to_tioce(pdev, NULL, &ce_kern, &port); + + spin_lock_irqsave(&ce_kern->ce_lock, flags); + + /* + * D64 didn't work ... See if we have an existing map that covers + * this address range. Must account for devices dma_mask here since + * an existing map might have been done in a mode using more pci + * address bits than this device can support. + */ + list_for_each_entry(map, &ce_kern->ce_dmamap_list, ce_dmamap_list) { + uint64_t last; + + last = map->ct_start + map->nbytes - 1; + if (ct_addr >= map->ct_start && + ct_addr + byte_count - 1 <= last && + map->pci_start <= dma_mask) { + map->refcnt++; + mapaddr = map->pci_start + (ct_addr - map->ct_start); + break; + } + } + + /* + * If we don't have a map yet, and the card can generate 40 + * bit addresses, try the M40/M40S modes. Note these modes do not + * support a barrier bit, so if we need a consistent map these + * won't work. + */ + if (!mapaddr && !barrier && dma_mask >= 0xffffffffffUL) { + /* + * We have two options for 40-bit mappings: 16GB "super" ATE's + * and 64MB "regular" ATE's. We'll try both if needed for a + * given mapping but which one we try first depends on the + * size. For requests >64MB, prefer to use a super page with + * regular as the fallback. Otherwise, try in the reverse order. + */ + + if (byte_count > MB(64)) { + mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40S, + port, ct_addr, byte_count); + if (!mapaddr) + mapaddr = + tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1, + ct_addr, byte_count); + } else { + mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1, + ct_addr, byte_count); + if (!mapaddr) + mapaddr = + tioce_alloc_map(ce_kern, TIOCE_ATE_M40S, + port, ct_addr, byte_count); + } + } + + /* + * 32-bit direct is the next mode to try + */ + if (!mapaddr && dma_mask >= 0xffffffffUL) + mapaddr = tioce_dma_d32(pdev, ct_addr); + + /* + * Last resort, try 32-bit ATE-based map. + */ + if (!mapaddr) + mapaddr = + tioce_alloc_map(ce_kern, TIOCE_ATE_M32, -1, ct_addr, + byte_count); + + spin_unlock_irqrestore(&ce_kern->ce_lock, flags); + +dma_map_done: + if (mapaddr & barrier) + mapaddr = tioce_dma_barrier(mapaddr, 1); + + return mapaddr; +} + +/** + * tioce_dma - standard pci dma map interface + * @pdev: pci device requesting the map + * @paddr: system physical address to map into pci space + * @byte_count: # bytes to map + * + * Simply call tioce_do_dma_map() to create a map with the barrier bit clear + * in the address. + */ +static uint64_t +tioce_dma(struct pci_dev *pdev, uint64_t paddr, size_t byte_count) +{ + return tioce_do_dma_map(pdev, paddr, byte_count, 0); +} + +/** + * tioce_dma_consistent - consistent pci dma map interface + * @pdev: pci device requesting the map + * @paddr: system physical address to map into pci space + * @byte_count: # bytes to map + * + * Simply call tioce_do_dma_map() to create a map with the barrier bit set + * in the address. + */ static uint64_t +tioce_dma_consistent(struct pci_dev *pdev, uint64_t paddr, size_t byte_count) +{ + return tioce_do_dma_map(pdev, paddr, byte_count, 1); +} + +/** + * tioce_error_intr_handler - SGI TIO CE error interrupt handler + * @irq: unused + * @arg: pointer to tioce_common struct for the given CE + * @pt: unused + * + * Handle a CE error interrupt. Simply a wrapper around a SAL call which + * defers processing to the SGI prom. + */ static irqreturn_t +tioce_error_intr_handler(int irq, void *arg, struct pt_regs *pt) +{ + struct tioce_common *soft = arg; + struct ia64_sal_retval ret_stuff; + ret_stuff.status = 0; + ret_stuff.v0 = 0; + + SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_ERROR_INTERRUPT, + soft->ce_pcibus.bs_persist_segment, + soft->ce_pcibus.bs_persist_busnum, 0, 0, 0, 0, 0); + + return IRQ_HANDLED; +} + +/** + * tioce_kern_init - init kernel structures related to a given TIOCE + * @tioce_common: ptr to a cached tioce_common struct that originated in prom + */ static struct tioce_kernel * +tioce_kern_init(struct tioce_common *tioce_common) +{ + int i; + uint32_t tmp; + struct tioce *tioce_mmr; + struct tioce_kernel *tioce_kern; + + tioce_kern = kcalloc(1, sizeof(struct tioce_kernel), GFP_KERNEL); + if (!tioce_kern) { + return NULL; + } + + tioce_kern->ce_common = tioce_common; + spin_lock_init(&tioce_kern->ce_lock); + INIT_LIST_HEAD(&tioce_kern->ce_dmamap_list); + tioce_common->ce_kernel_private = (uint64_t) tioce_kern; + + /* + * Determine the secondary bus number of the port2 logical PPB. + * This is used to decide whether a given pci device resides on + * port1 or port2. Note: We don't have enough plumbing set up + * here to use pci_read_config_xxx() so use the raw_pci_ops vector. + */ + + raw_pci_ops->read(tioce_common->ce_pcibus.bs_persist_segment, + tioce_common->ce_pcibus.bs_persist_busnum, + PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1, &tmp); + tioce_kern->ce_port1_secondary = (uint8_t) tmp; + + /* + * Set PMU pagesize to the largest size available, and zero out + * the ate's. + */ + + tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base; + tioce_mmr->ce_ure_page_map &= ~CE_URE_PAGESIZE_MASK; + tioce_mmr->ce_ure_page_map |= CE_URE_256K_PAGESIZE; + tioce_kern->ce_ate3240_pagesize = KB(256); + + for (i = 0; i < TIOCE_NUM_M40_ATES; i++) { + tioce_kern->ce_ate40_shadow[i] = 0; + tioce_mmr->ce_ure_ate40[i] = 0; + } + + for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) { + tioce_kern->ce_ate3240_shadow[i] = 0; + tioce_mmr->ce_ure_ate3240[i] = 0; + } + + return tioce_kern; +} + +/** + * tioce_force_interrupt - implement altix force_interrupt() backend for CE + * @sn_irq_info: sn asic irq that we need an interrupt generated for + * + * Given an sn_irq_info struct, set the proper bit in ce_adm_force_int to + * force a secondary interrupt to be generated. This is to work around an + * asic issue where there is a small window of opportunity for a legacy device + * interrupt to be lost. + */ +static void +tioce_force_interrupt(struct sn_irq_info *sn_irq_info) +{ + struct pcidev_info *pcidev_info; + struct tioce_common *ce_common; + struct tioce *ce_mmr; + uint64_t force_int_val; + + if (!sn_irq_info->irq_bridge) + return; + + if (sn_irq_info->irq_bridge_type != PCIIO_ASIC_TYPE_TIOCE) + return; + + pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo; + if (!pcidev_info) + return; + + ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; + ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base; + + /* + * irq_int_bit is originally set up by prom, and holds the interrupt + * bit shift (not mask) as defined by the bit definitions in the + * ce_adm_int mmr. These shifts are not the same for the + * ce_adm_force_int register, so do an explicit mapping here to make + * things clearer. + */ + + switch (sn_irq_info->irq_int_bit) { + case CE_ADM_INT_PCIE_PORT1_DEV_A_SHFT: + force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_A_SHFT; + break; + case CE_ADM_INT_PCIE_PORT1_DEV_B_SHFT: + force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_B_SHFT; + break; + case CE_ADM_INT_PCIE_PORT1_DEV_C_SHFT: + force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_C_SHFT; + break; + case CE_ADM_INT_PCIE_PORT1_DEV_D_SHFT: + force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_D_SHFT; + break; + case CE_ADM_INT_PCIE_PORT2_DEV_A_SHFT: + force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_A_SHFT; + break; + case CE_ADM_INT_PCIE_PORT2_DEV_B_SHFT: + force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_B_SHFT; + break; + case CE_ADM_INT_PCIE_PORT2_DEV_C_SHFT: + force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_C_SHFT; + break; + case CE_ADM_INT_PCIE_PORT2_DEV_D_SHFT: + force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_D_SHFT; + break; + default: + return; + } + ce_mmr->ce_adm_force_int = force_int_val; +} + +/** + * tioce_target_interrupt - implement set_irq_affinity for tioce resident + * functions. Note: only applies to line interrupts, not MSI's. + * + * @sn_irq_info: SN IRQ context + * + * Given an sn_irq_info, set the associated CE device's interrupt destination + * register. Since the interrupt destination registers are on a per-ce-slot + * basis, this will retarget line interrupts for all functions downstream of + * the slot. + */ +static void +tioce_target_interrupt(struct sn_irq_info *sn_irq_info) +{ + struct pcidev_info *pcidev_info; + struct tioce_common *ce_common; + struct tioce *ce_mmr; + int bit; + + pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo; + if (!pcidev_info) + return; + + ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; + ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base; + + bit = sn_irq_info->irq_int_bit; + + ce_mmr->ce_adm_int_mask |= (1UL << bit); + ce_mmr->ce_adm_int_dest[bit] = + ((uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT) | + sn_irq_info->irq_xtalkaddr; + ce_mmr->ce_adm_int_mask &= ~(1UL << bit); + + tioce_force_interrupt(sn_irq_info); +} + +/** + * tioce_bus_fixup - perform final PCI fixup for a TIO CE bus + * @prom_bussoft: Common prom/kernel struct representing the bus + * + * Replicates the tioce_common pointed to by @prom_bussoft in kernel + * space. Allocates and initializes a kernel-only area for a given CE, + * and sets up an irq for handling CE error interrupts. + * + * On successful setup, returns the kernel version of tioce_common back to + * the caller. + */ +static void * +tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller) +{ + struct tioce_common *tioce_common; + + /* + * Allocate kernel bus soft and copy from prom. + */ + + tioce_common = kcalloc(1, sizeof(struct tioce_common), GFP_KERNEL); + if (!tioce_common) + return NULL; + + memcpy(tioce_common, prom_bussoft, sizeof(struct tioce_common)); + tioce_common->ce_pcibus.bs_base |= __IA64_UNCACHED_OFFSET; + + if (tioce_kern_init(tioce_common) == NULL) { + kfree(tioce_common); + return NULL; + } + + if (request_irq(SGI_PCIASIC_ERROR, + tioce_error_intr_handler, + SA_SHIRQ, "TIOCE error", (void *)tioce_common)) + printk(KERN_WARNING + "%s: Unable to get irq %d. " + "Error interrupts won't be routed for " + "TIOCE bus %04x:%02x\n", + __FUNCTION__, SGI_PCIASIC_ERROR, + tioce_common->ce_pcibus.bs_persist_segment, + tioce_common->ce_pcibus.bs_persist_busnum); + + return tioce_common; +} + +static struct sn_pcibus_provider tioce_pci_interfaces = { + .dma_map = tioce_dma, + .dma_map_consistent = tioce_dma_consistent, + .dma_unmap = tioce_dma_unmap, + .bus_fixup = tioce_bus_fixup, + .force_interrupt = tioce_force_interrupt, + .target_interrupt = tioce_target_interrupt +}; + +/** + * tioce_init_provider - init SN PCI provider ops for TIO CE + */ +int +tioce_init_provider(void) +{ + sn_pci_provider[PCIIO_ASIC_TYPE_TIOCE] = &tioce_pci_interfaces; + return 0; +} diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 7622d4ec5f08..1ef3987ebc6a 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -242,8 +242,8 @@ config SMP Y to "Enhanced Real Time Clock Support", below. The "Advanced Power Management" code will be disabled if you say Y here. - See also the <file:Documentation/smp.tex>, - <file:Documentation/smp.txt> and the SMP-HOWTO available at + See also the <file:Documentation/smp.txt>, + and the SMP-HOWTO available at <http://www.linuxdoc.org/docs.html#howto>. If you don't know what to do here, say N. diff --git a/arch/m32r/kernel/asm-offsets.c b/arch/m32r/kernel/asm-offsets.c new file mode 100644 index 000000000000..9e263112a6e2 --- /dev/null +++ b/arch/m32r/kernel/asm-offsets.c @@ -0,0 +1 @@ +/* Dummy asm-offsets.c file. Required by kbuild and ready to be used - hint! */ diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c index 5aef7e406ef5..71763f7a1d19 100644 --- a/arch/m32r/kernel/signal.c +++ b/arch/m32r/kernel/signal.c @@ -341,13 +341,12 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, /* Set up the stack frame */ setup_rt_frame(sig, ka, info, oldset, regs); - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); } /* diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c index 48b187f2d2b3..a4576ac7e870 100644 --- a/arch/m32r/kernel/smp.c +++ b/arch/m32r/kernel/smp.c @@ -892,7 +892,6 @@ unsigned long send_IPI_mask_phys(cpumask_t physid_mask, int ipi_num, int try) { spinlock_t *ipilock; - unsigned long flags = 0; volatile unsigned long *ipicr_addr; unsigned long ipicr_val; unsigned long my_physid_mask; @@ -916,50 +915,27 @@ unsigned long send_IPI_mask_phys(cpumask_t physid_mask, int ipi_num, * write IPICRi (send IPIi) * unlock ipi_lock[i] */ + spin_lock(ipilock); __asm__ __volatile__ ( - ";; LOCK ipi_lock[i] \n\t" + ";; CHECK IPICRi == 0 \n\t" ".fillinsn \n" "1: \n\t" - "mvfc %1, psw \n\t" - "clrpsw #0x40 -> nop \n\t" - DCACHE_CLEAR("r4", "r5", "%2") - "lock r4, @%2 \n\t" - "addi r4, #-1 \n\t" - "unlock r4, @%2 \n\t" - "mvtc %1, psw \n\t" - "bnez r4, 2f \n\t" - LOCK_SECTION_START(".balign 4 \n\t") - ".fillinsn \n" - "2: \n\t" - "ld r4, @%2 \n\t" - "blez r4, 2b \n\t" + "ld %0, @%1 \n\t" + "and %0, %4 \n\t" + "beqz %0, 2f \n\t" + "bnez %3, 3f \n\t" "bra 1b \n\t" - LOCK_SECTION_END - ";; CHECK IPICRi == 0 \n\t" - ".fillinsn \n" - "3: \n\t" - "ld %0, @%3 \n\t" - "and %0, %6 \n\t" - "beqz %0, 4f \n\t" - "bnez %5, 5f \n\t" - "bra 3b \n\t" ";; WRITE IPICRi (send IPIi) \n\t" ".fillinsn \n" - "4: \n\t" - "st %4, @%3 \n\t" - ";; UNLOCK ipi_lock[i] \n\t" + "2: \n\t" + "st %2, @%1 \n\t" ".fillinsn \n" - "5: \n\t" - "ldi r4, #1 \n\t" - "st r4, @%2 \n\t" + "3: \n\t" : "=&r"(ipicr_val) - : "r"(flags), "r"(&ipilock->slock), "r"(ipicr_addr), - "r"(mask), "r"(try), "r"(my_physid_mask) - : "memory", "r4" -#ifdef CONFIG_CHIP_M32700_TS1 - , "r5" -#endif /* CONFIG_CHIP_M32700_TS1 */ + : "r"(ipicr_addr), "r"(mask), "r"(try), "r"(my_physid_mask) + : "memory" ); + spin_unlock(ipilock); return ipicr_val; } diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c index 8a2b77bc5749..539c562cd54d 100644 --- a/arch/m32r/kernel/time.c +++ b/arch/m32r/kernel/time.c @@ -171,10 +171,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); @@ -221,7 +218,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * called as close as possible to 500 ms before the new second starts. */ write_seqlock(&xtime_lock); - if ((time_status & STA_UNSYNC) == 0 + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned)TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned)TICK_SIZE) / 2) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 178c4a3fbb72..ba960bbc8e6d 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -25,6 +25,11 @@ config GENERIC_CALIBRATE_DELAY bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + depends on Q40 || (BROKEN && SUN3X) + default y + mainmenu "Linux/68k Kernel Configuration" source "init/Kconfig" diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile index 466e7407afc7..34d826d10f1b 100644 --- a/arch/m68k/Makefile +++ b/arch/m68k/Makefile @@ -113,14 +113,5 @@ else bzip2 -1c vmlinux >vmlinux.bz2 endif -prepare: include/asm-$(ARCH)/offsets.h -CLEAN_FILES += include/asm-$(ARCH)/offsets.h - -arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \ - include/config/MARKER - -include/asm-$(ARCH)/offsets.h: arch/$(ARCH)/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) - archclean: rm -f vmlinux.gz vmlinux.bz2 diff --git a/arch/m68k/amiga/amisound.c b/arch/m68k/amiga/amisound.c index cb5d93630467..bd5d134e9f12 100644 --- a/arch/m68k/amiga/amisound.c +++ b/arch/m68k/amiga/amisound.c @@ -63,7 +63,7 @@ void __init amiga_init_sound(void) } static void nosound( unsigned long ignored ); -static struct timer_list sound_timer = TIMER_INITIALIZER(nosound, 0, 0); +static DEFINE_TIMER(sound_timer, nosound, 0, 0); void amiga_mksound( unsigned int hz, unsigned int ticks ) { diff --git a/arch/m68k/bvme6000/rtc.c b/arch/m68k/bvme6000/rtc.c index c6b2a410bf9a..eb63ca6ed94c 100644 --- a/arch/m68k/bvme6000/rtc.c +++ b/arch/m68k/bvme6000/rtc.c @@ -14,6 +14,7 @@ #include <linux/fcntl.h> #include <linux/init.h> #include <linux/poll.h> +#include <linux/module.h> #include <linux/mc146818rtc.h> /* For struct rtc_time and ioctls, etc */ #include <linux/smp_lock.h> #include <asm/bvme6000hw.h> @@ -171,7 +172,7 @@ static struct miscdevice rtc_dev = { .fops = &rtc_fops }; -int __init rtc_DP8570A_init(void) +static int __init rtc_DP8570A_init(void) { if (!MACH_IS_BVME6000) return -ENODEV; @@ -179,4 +180,4 @@ int __init rtc_DP8570A_init(void) printk(KERN_INFO "DP8570A Real Time Clock Driver v%s\n", RTC_VERSION); return misc_register(&rtc_dev); } - +module_init(rtc_DP8570A_init); diff --git a/arch/m68k/fpsp040/skeleton.S b/arch/m68k/fpsp040/skeleton.S index dbc1255a5e99..9571a21d6ad4 100644 --- a/arch/m68k/fpsp040/skeleton.S +++ b/arch/m68k/fpsp040/skeleton.S @@ -40,7 +40,7 @@ #include <linux/linkage.h> #include <asm/entry.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> |SKELETON idnt 2,1 | Motorola 040 Floating Point Software Package diff --git a/arch/m68k/ifpsp060/iskeleton.S b/arch/m68k/ifpsp060/iskeleton.S index 803a6ecdda81..4ba2c74da93d 100644 --- a/arch/m68k/ifpsp060/iskeleton.S +++ b/arch/m68k/ifpsp060/iskeleton.S @@ -36,7 +36,7 @@ #include <linux/linkage.h> #include <asm/entry.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> |################################ diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index e964015a31dc..23ca60a45552 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -42,7 +42,7 @@ #include <asm/traps.h> #include <asm/unistd.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> .globl system_call, buserr, trap .globl resume, ret_from_exception diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S index 7cd6de17c20d..d4336d846df1 100644 --- a/arch/m68k/kernel/head.S +++ b/arch/m68k/kernel/head.S @@ -263,7 +263,7 @@ #include <asm/entry.h> #include <asm/pgtable.h> #include <asm/page.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #ifdef CONFIG_MAC diff --git a/arch/m68k/kernel/m68k_ksyms.c b/arch/m68k/kernel/m68k_ksyms.c index fe837e31afbf..73e2f5e168dd 100644 --- a/arch/m68k/kernel/m68k_ksyms.c +++ b/arch/m68k/kernel/m68k_ksyms.c @@ -74,10 +74,6 @@ EXPORT_SYMBOL(vme_brdtype); EXPORT_SYMBOL(__ashldi3); EXPORT_SYMBOL(__ashrdi3); EXPORT_SYMBOL(__lshrdi3); -EXPORT_SYMBOL(memcpy); -EXPORT_SYMBOL(memset); -EXPORT_SYMBOL(memcmp); -EXPORT_SYMBOL(memscan); EXPORT_SYMBOL(__muldi3); EXPORT_SYMBOL(__down_failed); diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c index f4e1e5eb8e12..8ed1b01a6a87 100644 --- a/arch/m68k/kernel/ptrace.c +++ b/arch/m68k/kernel/ptrace.c @@ -95,7 +95,7 @@ static inline int put_reg(struct task_struct *task, int regno, if (regno == PT_USP) addr = &task->thread.usp; else if (regno < sizeof(regoff)/sizeof(regoff[0])) - addr = (unsigned long *) (task->thread.esp0 + regoff[regno]); + addr = (unsigned long *)(task->thread.esp0 + regoff[regno]); else return -1; *addr = data; @@ -103,48 +103,56 @@ static inline int put_reg(struct task_struct *task, int regno, } /* - * Called by kernel/ptrace.c when detaching.. - * * Make sure the single step bit is not set. */ -void ptrace_disable(struct task_struct *child) +static inline void singlestep_disable(struct task_struct *child) { - unsigned long tmp; - /* make sure the single step bit is not set. */ - tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16); + unsigned long tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16); put_reg(child, PT_SR, tmp); child->thread.work.delayed_trace = 0; +} + +/* + * Called by kernel/ptrace.c when detaching.. + */ +void ptrace_disable(struct task_struct *child) +{ + singlestep_disable(child); child->thread.work.syscall_trace = 0; } asmlinkage int sys_ptrace(long request, long pid, long addr, long data) { struct task_struct *child; - int ret; + unsigned long tmp; + int i, ret = 0; lock_kernel(); - ret = -EPERM; if (request == PTRACE_TRACEME) { /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) + if (current->ptrace & PT_PTRACED) { + ret = -EPERM; goto out; + } /* set the ptrace bit in the process flags. */ current->ptrace |= PT_PTRACED; - ret = 0; goto out; } - ret = -ESRCH; read_lock(&tasklist_lock); child = find_task_by_pid(pid); if (child) get_task_struct(child); read_unlock(&tasklist_lock); - if (!child) + if (unlikely(!child)) { + ret = -ESRCH; goto out; + } - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ + /* you may not mess with init */ + if (unlikely(pid == 1)) { + ret = -EPERM; goto out_tsk; + } if (request == PTRACE_ATTACH) { ret = ptrace_attach(child); @@ -152,227 +160,171 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data) } ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) + if (ret) goto out_tsk; switch (request) { /* when I and D space are separate, these will need to be fixed. */ - case PTRACE_PEEKTEXT: /* read word at location addr. */ - case PTRACE_PEEKDATA: { - unsigned long tmp; - int copied; - - copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); - ret = -EIO; - if (copied != sizeof(tmp)) - break; - ret = put_user(tmp,(unsigned long *) data); - break; - } + case PTRACE_PEEKTEXT: /* read word at location addr. */ + case PTRACE_PEEKDATA: + i = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); + if (i != sizeof(tmp)) + goto out_eio; + ret = put_user(tmp, (unsigned long *)data); + break; /* read the word at location addr in the USER area. */ - case PTRACE_PEEKUSR: { - unsigned long tmp; - - ret = -EIO; - if ((addr & 3) || addr < 0 || - addr > sizeof(struct user) - 3) - break; - - tmp = 0; /* Default return condition */ - addr = addr >> 2; /* temporary hack. */ - ret = -EIO; - if (addr < 19) { - tmp = get_reg(child, addr); - if (addr == PT_SR) - tmp >>= 16; - } else if (addr >= 21 && addr < 49) { - tmp = child->thread.fp[addr - 21]; -#ifdef CONFIG_M68KFPU_EMU - /* Convert internal fpu reg representation - * into long double format - */ - if (FPU_IS_EMU && (addr < 45) && !(addr % 3)) - tmp = ((tmp & 0xffff0000) << 15) | - ((tmp & 0x0000ffff) << 16); -#endif - } else - break; - ret = put_user(tmp,(unsigned long *) data); - break; - } - - /* when I and D space are separate, this will have to be fixed. */ - case PTRACE_POKETEXT: /* write the word at location addr. */ - case PTRACE_POKEDATA: - ret = 0; - if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data)) - break; - ret = -EIO; - break; - - case PTRACE_POKEUSR: /* write the word at location addr in the USER area */ - ret = -EIO; - if ((addr & 3) || addr < 0 || - addr > sizeof(struct user) - 3) - break; - - addr = addr >> 2; /* temporary hack. */ - - if (addr == PT_SR) { - data &= SR_MASK; - data <<= 16; - data |= get_reg(child, PT_SR) & ~(SR_MASK << 16); - } - if (addr < 19) { - if (put_reg(child, addr, data)) - break; - ret = 0; - break; - } - if (addr >= 21 && addr < 48) - { -#ifdef CONFIG_M68KFPU_EMU - /* Convert long double format - * into internal fpu reg representation - */ - if (FPU_IS_EMU && (addr < 45) && !(addr % 3)) { - data = (unsigned long)data << 15; - data = (data & 0xffff0000) | - ((data & 0x0000ffff) >> 1); - } -#endif - child->thread.fp[addr - 21] = data; - ret = 0; - } + case PTRACE_PEEKUSR: + if (addr & 3) + goto out_eio; + addr >>= 2; /* temporary hack. */ + + if (addr >= 0 && addr < 19) { + tmp = get_reg(child, addr); + if (addr == PT_SR) + tmp >>= 16; + } else if (addr >= 21 && addr < 49) { + tmp = child->thread.fp[addr - 21]; + /* Convert internal fpu reg representation + * into long double format + */ + if (FPU_IS_EMU && (addr < 45) && !(addr % 3)) + tmp = ((tmp & 0xffff0000) << 15) | + ((tmp & 0x0000ffff) << 16); + } else break; - - case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ - case PTRACE_CONT: { /* restart after signal. */ - long tmp; - - ret = -EIO; - if (!valid_signal(data)) - break; - if (request == PTRACE_SYSCALL) { - child->thread.work.syscall_trace = ~0; - } else { - child->thread.work.syscall_trace = 0; + ret = put_user(tmp, (unsigned long *)data); + break; + + /* when I and D space are separate, this will have to be fixed. */ + case PTRACE_POKETEXT: /* write the word at location addr. */ + case PTRACE_POKEDATA: + if (access_process_vm(child, addr, &data, sizeof(data), 1) != sizeof(data)) + goto out_eio; + break; + + case PTRACE_POKEUSR: /* write the word at location addr in the USER area */ + if (addr & 3) + goto out_eio; + addr >>= 2; /* temporary hack. */ + + if (addr == PT_SR) { + data &= SR_MASK; + data <<= 16; + data |= get_reg(child, PT_SR) & ~(SR_MASK << 16); + } else if (addr >= 0 && addr < 19) { + if (put_reg(child, addr, data)) + goto out_eio; + } else if (addr >= 21 && addr < 48) { + /* Convert long double format + * into internal fpu reg representation + */ + if (FPU_IS_EMU && (addr < 45) && !(addr % 3)) { + data = (unsigned long)data << 15; + data = (data & 0xffff0000) | + ((data & 0x0000ffff) >> 1); } - child->exit_code = data; - /* make sure the single step bit is not set. */ - tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16); - put_reg(child, PT_SR, tmp); - child->thread.work.delayed_trace = 0; - wake_up_process(child); - ret = 0; - break; - } - -/* - * make the child exit. Best I can do is send it a sigkill. - * perhaps it should be put in the status that it wants to - * exit. - */ - case PTRACE_KILL: { - long tmp; - - ret = 0; - if (child->exit_state == EXIT_ZOMBIE) /* already dead */ - break; - child->exit_code = SIGKILL; - /* make sure the single step bit is not set. */ - tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16); - put_reg(child, PT_SR, tmp); - child->thread.work.delayed_trace = 0; - wake_up_process(child); - break; - } - - case PTRACE_SINGLESTEP: { /* set the trap flag. */ - long tmp; - - ret = -EIO; - if (!valid_signal(data)) - break; + child->thread.fp[addr - 21] = data; + } else + goto out_eio; + break; + + case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ + case PTRACE_CONT: /* restart after signal. */ + if (!valid_signal(data)) + goto out_eio; + + if (request == PTRACE_SYSCALL) + child->thread.work.syscall_trace = ~0; + else child->thread.work.syscall_trace = 0; - tmp = get_reg(child, PT_SR) | (TRACE_BITS << 16); - put_reg(child, PT_SR, tmp); - child->thread.work.delayed_trace = 1; - - child->exit_code = data; - /* give it a chance to run. */ - wake_up_process(child); - ret = 0; - break; - } + child->exit_code = data; + singlestep_disable(child); + wake_up_process(child); + break; - case PTRACE_DETACH: /* detach a process that was attached. */ - ret = ptrace_detach(child, data); + /* + * make the child exit. Best I can do is send it a sigkill. + * perhaps it should be put in the status that it wants to + * exit. + */ + case PTRACE_KILL: + if (child->exit_state == EXIT_ZOMBIE) /* already dead */ break; - - case PTRACE_GETREGS: { /* Get all gp regs from the child. */ - int i; - unsigned long tmp; - for (i = 0; i < 19; i++) { - tmp = get_reg(child, i); - if (i == PT_SR) + child->exit_code = SIGKILL; + singlestep_disable(child); + wake_up_process(child); + break; + + case PTRACE_SINGLESTEP: /* set the trap flag. */ + if (!valid_signal(data)) + goto out_eio; + + child->thread.work.syscall_trace = 0; + tmp = get_reg(child, PT_SR) | (TRACE_BITS << 16); + put_reg(child, PT_SR, tmp); + child->thread.work.delayed_trace = 1; + + child->exit_code = data; + /* give it a chance to run. */ + wake_up_process(child); + break; + + case PTRACE_DETACH: /* detach a process that was attached. */ + ret = ptrace_detach(child, data); + break; + + case PTRACE_GETREGS: /* Get all gp regs from the child. */ + for (i = 0; i < 19; i++) { + tmp = get_reg(child, i); + if (i == PT_SR) tmp >>= 16; - if (put_user(tmp, (unsigned long *) data)) { - ret = -EFAULT; + ret = put_user(tmp, (unsigned long *)data); + if (ret) break; - } - data += sizeof(long); - } - ret = 0; - break; + data += sizeof(long); } + break; - case PTRACE_SETREGS: { /* Set all gp regs in the child. */ - int i; - unsigned long tmp; - for (i = 0; i < 19; i++) { - if (get_user(tmp, (unsigned long *) data)) { - ret = -EFAULT; + case PTRACE_SETREGS: /* Set all gp regs in the child. */ + for (i = 0; i < 19; i++) { + ret = get_user(tmp, (unsigned long *)data); + if (ret) break; - } - if (i == PT_SR) { + if (i == PT_SR) { tmp &= SR_MASK; tmp <<= 16; tmp |= get_reg(child, PT_SR) & ~(SR_MASK << 16); - } - put_reg(child, i, tmp); - data += sizeof(long); } - ret = 0; - break; + put_reg(child, i, tmp); + data += sizeof(long); } - - case PTRACE_GETFPREGS: { /* Get the child FPU state. */ - ret = 0; - if (copy_to_user((void *)data, &child->thread.fp, - sizeof(struct user_m68kfp_struct))) - ret = -EFAULT; - break; - } - - case PTRACE_SETFPREGS: { /* Set the child FPU state. */ - ret = 0; - if (copy_from_user(&child->thread.fp, (void *)data, - sizeof(struct user_m68kfp_struct))) - ret = -EFAULT; - break; - } - - default: - ret = ptrace_request(child, request, addr, data); - break; + break; + + case PTRACE_GETFPREGS: /* Get the child FPU state. */ + if (copy_to_user((void *)data, &child->thread.fp, + sizeof(struct user_m68kfp_struct))) + ret = -EFAULT; + break; + + case PTRACE_SETFPREGS: /* Set the child FPU state. */ + if (copy_from_user(&child->thread.fp, (void *)data, + sizeof(struct user_m68kfp_struct))) + ret = -EFAULT; + break; + + default: + ret = ptrace_request(child, request, addr, data); + break; } out_tsk: put_task_struct(child); out: unlock_kernel(); return ret; +out_eio: + ret = -EIO; + goto out_tsk; } asmlinkage void syscall_trace(void) diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c index e47e19588525..4ec95e3cb874 100644 --- a/arch/m68k/kernel/time.c +++ b/arch/m68k/kernel/time.c @@ -166,10 +166,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile index 34b6dbc29c85..ebe51a513817 100644 --- a/arch/m68k/lib/Makefile +++ b/arch/m68k/lib/Makefile @@ -5,4 +5,4 @@ EXTRA_AFLAGS := -traditional lib-y := ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ - checksum.o memcmp.o memcpy.o memset.o semaphore.o + checksum.o string.o semaphore.o diff --git a/arch/m68k/lib/memcmp.c b/arch/m68k/lib/memcmp.c deleted file mode 100644 index f4796febb773..000000000000 --- a/arch/m68k/lib/memcmp.c +++ /dev/null @@ -1,11 +0,0 @@ -#include <linux/types.h> - -int memcmp(const void * cs,const void * ct,size_t count) -{ - const unsigned char *su1, *su2; - - for( su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--) - if (*su1 != *su2) - return((*su1 < *su2) ? -1 : +1); - return(0); -} diff --git a/arch/m68k/lib/memcpy.c b/arch/m68k/lib/memcpy.c deleted file mode 100644 index 73e181823d9b..000000000000 --- a/arch/m68k/lib/memcpy.c +++ /dev/null @@ -1,75 +0,0 @@ -#include <linux/types.h> - -void * memcpy(void * to, const void * from, size_t n) -{ - void *xto = to; - size_t temp, temp1; - - if (!n) - return xto; - if ((long) to & 1) - { - char *cto = to; - const char *cfrom = from; - *cto++ = *cfrom++; - to = cto; - from = cfrom; - n--; - } - if (n > 2 && (long) to & 2) - { - short *sto = to; - const short *sfrom = from; - *sto++ = *sfrom++; - to = sto; - from = sfrom; - n -= 2; - } - temp = n >> 2; - if (temp) - { - long *lto = to; - const long *lfrom = from; - - __asm__ __volatile__("movel %2,%3\n\t" - "andw #7,%3\n\t" - "lsrl #3,%2\n\t" - "negw %3\n\t" - "jmp %%pc@(1f,%3:w:2)\n\t" - "4:\t" - "movel %0@+,%1@+\n\t" - "movel %0@+,%1@+\n\t" - "movel %0@+,%1@+\n\t" - "movel %0@+,%1@+\n\t" - "movel %0@+,%1@+\n\t" - "movel %0@+,%1@+\n\t" - "movel %0@+,%1@+\n\t" - "movel %0@+,%1@+\n\t" - "1:\t" - "dbra %2,4b\n\t" - "clrw %2\n\t" - "subql #1,%2\n\t" - "jpl 4b\n\t" - : "=a" (lfrom), "=a" (lto), "=d" (temp), - "=&d" (temp1) - : "0" (lfrom), "1" (lto), "2" (temp) - ); - to = lto; - from = lfrom; - } - if (n & 2) - { - short *sto = to; - const short *sfrom = from; - *sto++ = *sfrom++; - to = sto; - from = sfrom; - } - if (n & 1) - { - char *cto = to; - const char *cfrom = from; - *cto = *cfrom; - } - return xto; -} diff --git a/arch/m68k/lib/memset.c b/arch/m68k/lib/memset.c deleted file mode 100644 index d55fdb2ee9d3..000000000000 --- a/arch/m68k/lib/memset.c +++ /dev/null @@ -1,68 +0,0 @@ -#include <linux/types.h> - -void * memset(void * s, int c, size_t count) -{ - void *xs = s; - size_t temp, temp1; - - if (!count) - return xs; - c &= 0xff; - c |= c << 8; - c |= c << 16; - if ((long) s & 1) - { - char *cs = s; - *cs++ = c; - s = cs; - count--; - } - if (count > 2 && (long) s & 2) - { - short *ss = s; - *ss++ = c; - s = ss; - count -= 2; - } - temp = count >> 2; - if (temp) - { - long *ls = s; - - __asm__ __volatile__("movel %1,%2\n\t" - "andw #7,%2\n\t" - "lsrl #3,%1\n\t" - "negw %2\n\t" - "jmp %%pc@(2f,%2:w:2)\n\t" - "1:\t" - "movel %3,%0@+\n\t" - "movel %3,%0@+\n\t" - "movel %3,%0@+\n\t" - "movel %3,%0@+\n\t" - "movel %3,%0@+\n\t" - "movel %3,%0@+\n\t" - "movel %3,%0@+\n\t" - "movel %3,%0@+\n\t" - "2:\t" - "dbra %1,1b\n\t" - "clrw %1\n\t" - "subql #1,%1\n\t" - "jpl 1b\n\t" - : "=a" (ls), "=d" (temp), "=&d" (temp1) - : "d" (c), "0" (ls), "1" (temp) - ); - s = ls; - } - if (count & 2) - { - short *ss = s; - *ss++ = c; - s = ss; - } - if (count & 1) - { - char *cs = s; - *cs = c; - } - return xs; -} diff --git a/arch/m68k/lib/string.c b/arch/m68k/lib/string.c new file mode 100644 index 000000000000..b92b89e1ea0c --- /dev/null +++ b/arch/m68k/lib/string.c @@ -0,0 +1,237 @@ + +#include <linux/types.h> +#include <linux/module.h> + +void *memset(void *s, int c, size_t count) +{ + void *xs = s; + size_t temp, temp1; + + if (!count) + return xs; + c &= 0xff; + c |= c << 8; + c |= c << 16; + if ((long)s & 1) { + char *cs = s; + *cs++ = c; + s = cs; + count--; + } + if (count > 2 && (long)s & 2) { + short *ss = s; + *ss++ = c; + s = ss; + count -= 2; + } + temp = count >> 2; + if (temp) { + long *ls = s; + + asm volatile ( + " movel %1,%2\n" + " andw #7,%2\n" + " lsrl #3,%1\n" + " negw %2\n" + " jmp %%pc@(2f,%2:w:2)\n" + "1: movel %3,%0@+\n" + " movel %3,%0@+\n" + " movel %3,%0@+\n" + " movel %3,%0@+\n" + " movel %3,%0@+\n" + " movel %3,%0@+\n" + " movel %3,%0@+\n" + " movel %3,%0@+\n" + "2: dbra %1,1b\n" + " clrw %1\n" + " subql #1,%1\n" + " jpl 1b" + : "=a" (ls), "=d" (temp), "=&d" (temp1) + : "d" (c), "0" (ls), "1" (temp)); + s = ls; + } + if (count & 2) { + short *ss = s; + *ss++ = c; + s = ss; + } + if (count & 1) { + char *cs = s; + *cs = c; + } + return xs; +} +EXPORT_SYMBOL(memset); + +void *memcpy(void *to, const void *from, size_t n) +{ + void *xto = to; + size_t temp, temp1; + + if (!n) + return xto; + if ((long)to & 1) { + char *cto = to; + const char *cfrom = from; + *cto++ = *cfrom++; + to = cto; + from = cfrom; + n--; + } + if (n > 2 && (long)to & 2) { + short *sto = to; + const short *sfrom = from; + *sto++ = *sfrom++; + to = sto; + from = sfrom; + n -= 2; + } + temp = n >> 2; + if (temp) { + long *lto = to; + const long *lfrom = from; + + asm volatile ( + " movel %2,%3\n" + " andw #7,%3\n" + " lsrl #3,%2\n" + " negw %3\n" + " jmp %%pc@(1f,%3:w:2)\n" + "4: movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + "1: dbra %2,4b\n" + " clrw %2\n" + " subql #1,%2\n" + " jpl 4b" + : "=a" (lfrom), "=a" (lto), "=d" (temp), "=&d" (temp1) + : "0" (lfrom), "1" (lto), "2" (temp)); + to = lto; + from = lfrom; + } + if (n & 2) { + short *sto = to; + const short *sfrom = from; + *sto++ = *sfrom++; + to = sto; + from = sfrom; + } + if (n & 1) { + char *cto = to; + const char *cfrom = from; + *cto = *cfrom; + } + return xto; +} +EXPORT_SYMBOL(memcpy); + +void *memmove(void *dest, const void *src, size_t n) +{ + void *xdest = dest; + size_t temp; + + if (!n) + return xdest; + + if (dest < src) { + if ((long)dest & 1) { + char *cdest = dest; + const char *csrc = src; + *cdest++ = *csrc++; + dest = cdest; + src = csrc; + n--; + } + if (n > 2 && (long)dest & 2) { + short *sdest = dest; + const short *ssrc = src; + *sdest++ = *ssrc++; + dest = sdest; + src = ssrc; + n -= 2; + } + temp = n >> 2; + if (temp) { + long *ldest = dest; + const long *lsrc = src; + temp--; + do + *ldest++ = *lsrc++; + while (temp--); + dest = ldest; + src = lsrc; + } + if (n & 2) { + short *sdest = dest; + const short *ssrc = src; + *sdest++ = *ssrc++; + dest = sdest; + src = ssrc; + } + if (n & 1) { + char *cdest = dest; + const char *csrc = src; + *cdest = *csrc; + } + } else { + dest = (char *)dest + n; + src = (const char *)src + n; + if ((long)dest & 1) { + char *cdest = dest; + const char *csrc = src; + *--cdest = *--csrc; + dest = cdest; + src = csrc; + n--; + } + if (n > 2 && (long)dest & 2) { + short *sdest = dest; + const short *ssrc = src; + *--sdest = *--ssrc; + dest = sdest; + src = ssrc; + n -= 2; + } + temp = n >> 2; + if (temp) { + long *ldest = dest; + const long *lsrc = src; + temp--; + do + *--ldest = *--lsrc; + while (temp--); + dest = ldest; + src = lsrc; + } + if (n & 2) { + short *sdest = dest; + const short *ssrc = src; + *--sdest = *--ssrc; + dest = sdest; + src = ssrc; + } + if (n & 1) { + char *cdest = dest; + const char *csrc = src; + *--cdest = *--csrc; + } + } + return xdest; +} +EXPORT_SYMBOL(memmove); + +int memcmp(const void *cs, const void *ct, size_t count) +{ + const unsigned char *su1, *su2; + + for (su1 = cs, su2 = ct; count > 0; ++su1, ++su2, count--) + if (*su1 != *su2) + return *su1 < *su2 ? -1 : +1; + return 0; +} +EXPORT_SYMBOL(memcmp); diff --git a/arch/m68k/mac/macboing.c b/arch/m68k/mac/macboing.c index 44c5cd2ad6a8..8f0640847ad2 100644 --- a/arch/m68k/mac/macboing.c +++ b/arch/m68k/mac/macboing.c @@ -56,8 +56,7 @@ static void ( *mac_special_bell )( unsigned int, unsigned int, unsigned int ); /* * our timer to start/continue/stop the bell */ -static struct timer_list mac_sound_timer = - TIMER_INITIALIZER(mac_nosound, 0, 0); +static DEFINE_TIMER(mac_sound_timer, mac_nosound, 0, 0); /* * Sort of initialize the sound chip (called from mac_mksound on the first diff --git a/arch/m68k/math-emu/fp_emu.h b/arch/m68k/math-emu/fp_emu.h index 1d6edc975d89..c1ecfef7886a 100644 --- a/arch/m68k/math-emu/fp_emu.h +++ b/arch/m68k/math-emu/fp_emu.h @@ -39,7 +39,7 @@ #define _FP_EMU_H #ifdef __ASSEMBLY__ -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #endif #include <asm/math-emu.h> diff --git a/arch/m68k/mm/Makefile b/arch/m68k/mm/Makefile index 90f1c735c110..5eaa43c4cb3c 100644 --- a/arch/m68k/mm/Makefile +++ b/arch/m68k/mm/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux m68k-specific parts of the memory manager. # -obj-y := init.o fault.o hwtest.o +obj-y := cache.o init.o fault.o hwtest.o obj-$(CONFIG_MMU_MOTOROLA) += kmap.o memory.o motorola.o obj-$(CONFIG_MMU_SUN3) += sun3kmap.o sun3mmu.o diff --git a/arch/m68k/mm/cache.c b/arch/m68k/mm/cache.c new file mode 100644 index 000000000000..5437fff5fe07 --- /dev/null +++ b/arch/m68k/mm/cache.c @@ -0,0 +1,118 @@ +/* + * linux/arch/m68k/mm/cache.c + * + * Instruction cache handling + * + * Copyright (C) 1995 Hamish Macdonald + */ + +#include <linux/module.h> +#include <asm/pgalloc.h> +#include <asm/traps.h> + + +static unsigned long virt_to_phys_slow(unsigned long vaddr) +{ + if (CPU_IS_060) { + unsigned long paddr; + + /* The PLPAR instruction causes an access error if the translation + * is not possible. To catch this we use the same exception mechanism + * as for user space accesses in <asm/uaccess.h>. */ + asm volatile (".chip 68060\n" + "1: plpar (%0)\n" + ".chip 68k\n" + "2:\n" + ".section .fixup,\"ax\"\n" + " .even\n" + "3: sub.l %0,%0\n" + " jra 2b\n" + ".previous\n" + ".section __ex_table,\"a\"\n" + " .align 4\n" + " .long 1b,3b\n" + ".previous" + : "=a" (paddr) + : "0" (vaddr)); + return paddr; + } else if (CPU_IS_040) { + unsigned long mmusr; + + asm volatile (".chip 68040\n\t" + "ptestr (%1)\n\t" + "movec %%mmusr, %0\n\t" + ".chip 68k" + : "=r" (mmusr) + : "a" (vaddr)); + + if (mmusr & MMU_R_040) + return (mmusr & PAGE_MASK) | (vaddr & ~PAGE_MASK); + } else { + unsigned short mmusr; + unsigned long *descaddr; + + asm volatile ("ptestr %3,%2@,#7,%0\n\t" + "pmove %%psr,%1@" + : "=a&" (descaddr) + : "a" (&mmusr), "a" (vaddr), "d" (get_fs().seg)); + if (mmusr & (MMU_I|MMU_B|MMU_L)) + return 0; + descaddr = phys_to_virt((unsigned long)descaddr); + switch (mmusr & MMU_NUM) { + case 1: + return (*descaddr & 0xfe000000) | (vaddr & 0x01ffffff); + case 2: + return (*descaddr & 0xfffc0000) | (vaddr & 0x0003ffff); + case 3: + return (*descaddr & PAGE_MASK) | (vaddr & ~PAGE_MASK); + } + } + return 0; +} + +/* Push n pages at kernel virtual address and clear the icache */ +/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */ +void flush_icache_range(unsigned long address, unsigned long endaddr) +{ + + if (CPU_IS_040_OR_060) { + address &= PAGE_MASK; + + do { + asm volatile ("nop\n\t" + ".chip 68040\n\t" + "cpushp %%bc,(%0)\n\t" + ".chip 68k" + : : "a" (virt_to_phys_slow(address))); + address += PAGE_SIZE; + } while (address < endaddr); + } else { + unsigned long tmp; + asm volatile ("movec %%cacr,%0\n\t" + "orw %1,%0\n\t" + "movec %0,%%cacr" + : "=&d" (tmp) + : "di" (FLUSH_I)); + } +} +EXPORT_SYMBOL(flush_icache_range); + +void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, + unsigned long addr, int len) +{ + if (CPU_IS_040_OR_060) { + asm volatile ("nop\n\t" + ".chip 68040\n\t" + "cpushp %%bc,(%0)\n\t" + ".chip 68k" + : : "a" (page_to_phys(page))); + } else { + unsigned long tmp; + asm volatile ("movec %%cacr,%0\n\t" + "orw %1,%0\n\t" + "movec %0,%%cacr" + : "=&d" (tmp) + : "di" (FLUSH_I)); + } +} + diff --git a/arch/m68k/mm/memory.c b/arch/m68k/mm/memory.c index 1453a6013721..559942ce0e1e 100644 --- a/arch/m68k/mm/memory.c +++ b/arch/m68k/mm/memory.c @@ -354,110 +354,6 @@ void cache_push (unsigned long paddr, int len) #endif } -static unsigned long virt_to_phys_slow(unsigned long vaddr) -{ - if (CPU_IS_060) { - mm_segment_t fs = get_fs(); - unsigned long paddr; - - set_fs(get_ds()); - - /* The PLPAR instruction causes an access error if the translation - * is not possible. To catch this we use the same exception mechanism - * as for user space accesses in <asm/uaccess.h>. */ - asm volatile (".chip 68060\n" - "1: plpar (%0)\n" - ".chip 68k\n" - "2:\n" - ".section .fixup,\"ax\"\n" - " .even\n" - "3: sub.l %0,%0\n" - " jra 2b\n" - ".previous\n" - ".section __ex_table,\"a\"\n" - " .align 4\n" - " .long 1b,3b\n" - ".previous" - : "=a" (paddr) - : "0" (vaddr)); - set_fs(fs); - return paddr; - } else if (CPU_IS_040) { - mm_segment_t fs = get_fs(); - unsigned long mmusr; - - set_fs(get_ds()); - - asm volatile (".chip 68040\n\t" - "ptestr (%1)\n\t" - "movec %%mmusr, %0\n\t" - ".chip 68k" - : "=r" (mmusr) - : "a" (vaddr)); - set_fs(fs); - - if (mmusr & MMU_R_040) - return (mmusr & PAGE_MASK) | (vaddr & ~PAGE_MASK); - } else { - unsigned short mmusr; - unsigned long *descaddr; - - asm volatile ("ptestr #5,%2@,#7,%0\n\t" - "pmove %%psr,%1@" - : "=a&" (descaddr) - : "a" (&mmusr), "a" (vaddr)); - if (mmusr & (MMU_I|MMU_B|MMU_L)) - return 0; - descaddr = phys_to_virt((unsigned long)descaddr); - switch (mmusr & MMU_NUM) { - case 1: - return (*descaddr & 0xfe000000) | (vaddr & 0x01ffffff); - case 2: - return (*descaddr & 0xfffc0000) | (vaddr & 0x0003ffff); - case 3: - return (*descaddr & PAGE_MASK) | (vaddr & ~PAGE_MASK); - } - } - return 0; -} - -/* Push n pages at kernel virtual address and clear the icache */ -/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */ -void flush_icache_range(unsigned long address, unsigned long endaddr) -{ - if (CPU_IS_040_OR_060) { - address &= PAGE_MASK; - - if (address >= PAGE_OFFSET && address < (unsigned long)high_memory) { - do { - asm volatile ("nop\n\t" - ".chip 68040\n\t" - "cpushp %%bc,(%0)\n\t" - ".chip 68k" - : : "a" (virt_to_phys((void *)address))); - address += PAGE_SIZE; - } while (address < endaddr); - } else { - do { - asm volatile ("nop\n\t" - ".chip 68040\n\t" - "cpushp %%bc,(%0)\n\t" - ".chip 68k" - : : "a" (virt_to_phys_slow(address))); - address += PAGE_SIZE; - } while (address < endaddr); - } - } else { - unsigned long tmp; - asm volatile ("movec %%cacr,%0\n\t" - "orw %1,%0\n\t" - "movec %0,%%cacr" - : "=&d" (tmp) - : "di" (FLUSH_I)); - } -} - - #ifndef CONFIG_SINGLE_MEMORY_CHUNK int mm_end_of_chunk (unsigned long addr, int len) { diff --git a/arch/m68k/mvme16x/rtc.c b/arch/m68k/mvme16x/rtc.c index 8a2425069088..7977eae50af2 100644 --- a/arch/m68k/mvme16x/rtc.c +++ b/arch/m68k/mvme16x/rtc.c @@ -161,7 +161,7 @@ static struct miscdevice rtc_dev= .fops = &rtc_fops }; -int __init rtc_MK48T08_init(void) +static int __init rtc_MK48T08_init(void) { if (!MACH_IS_MVME16x) return -ENODEV; @@ -169,4 +169,4 @@ int __init rtc_MK48T08_init(void) printk(KERN_INFO "MK48T08 Real Time Clock Driver v%s\n", RTC_VERSION); return misc_register(&rtc_dev); } - +module_init(rtc_MK48T08_init); diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 117f183f0b43..8520df9cee6d 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -71,21 +71,31 @@ config M5206e help Motorola ColdFire 5206e processor support. +config M523x + bool "MCF523x" + help + Freescale Coldfire 5230/1/2/4/5 processor support + config M5249 bool "MCF5249" help Motorola ColdFire 5249 processor support. -config M527x - bool "MCF527x" +config M5271 + bool "MCF5271" help - Freescale (Motorola) ColdFire 5270/5271/5274/5275 processor support. + Freescale (Motorola) ColdFire 5270/5271 processor support. config M5272 bool "MCF5272" help Motorola ColdFire 5272 processor support. +config M5275 + bool "MCF5275" + help + Freescale (Motorola) ColdFire 5274/5275 processor support. + config M528x bool "MCF528x" help @@ -103,9 +113,14 @@ config M5407 endchoice +config M527x + bool + depends on (M5271 || M5275) + default y + config COLDFIRE bool - depends on (M5206 || M5206e || M5249 || M527x || M5272 || M528x || M5307 || M5407) + depends on (M5206 || M5206e || M523x || M5249 || M527x || M5272 || M528x || M5307 || M5407) default y choice @@ -183,6 +198,11 @@ config CLOCK_60MHz help Select a 60MHz CPU clock frequency. +config CLOCK_62_5MHz + bool "62.5MHz" + help + Select a 62.5MHz CPU clock frequency. + config CLOCK_64MHz bool "64MHz" help @@ -302,6 +322,12 @@ config ELITE help Support for the Motorola M5206eLITE board. +config M5235EVB + bool "Freescale M5235EVB support" + depends on M523x + help + Support for the Freescale M5235EVB board. + config M5249C3 bool "Motorola M5249C3 board support" depends on M5249 @@ -310,13 +336,13 @@ config M5249C3 config M5271EVB bool "Freescale (Motorola) M5271EVB board support" - depends on M527x + depends on M5271 help Support for the Freescale (Motorola) M5271EVB board. config M5275EVB bool "Freescale (Motorola) M5275EVB board support" - depends on M527x + depends on M5275 help Support for the Freescale (Motorola) M5275EVB board. @@ -343,6 +369,12 @@ config COBRA5282 depends on M528x help Support for the senTec COBRA5282 board. + +config SOM5282EM + bool "EMAC.Inc SOM5282EM board support" + depends on M528x + help + Support for the EMAC.Inc SOM5282EM module. config ARN5307 bool "Arnewsh 5307 board support" @@ -410,6 +442,12 @@ config CPU16B help Support for the SNEHA CPU16B board. +config MOD5272 + bool "Netburner MOD-5272 board support" + depends on M5272 + help + Support for the Netburner MOD-5272 board. + config ROMFS_FROM_ROM bool " ROMFS image not RAM resident" depends on (NETtel || SNAPGEAR) @@ -430,7 +468,7 @@ config ARNEWSH config MOTOROLA bool default y - depends on (M5206eC3 || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5407C3) + depends on (M5206eC3 || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5407C3) config HW_FEITH bool @@ -441,6 +479,11 @@ config senTec bool default y depends on (COBRA5272 || COBRA5282) + +config EMAC_INC + bool + default y + depends on (SOM5282EM) config SNEHA bool @@ -455,6 +498,15 @@ config LARGE_ALLOCS a lot of RAM, and you need to able to allocate very large contiguous chunks. If unsure, say N. +config 4KSTACKS + bool "Use 4Kb for kernel stacks instead of 8Kb" + default y + help + If you say Y here the kernel will use a 4Kb stacksize for the + kernel stack attached to each process/thread. This facilitates + running more threads on a system and also reduces the pressure + on the VM subsystem for higher order allocations. + choice prompt "RAM size" default AUTO diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile index a254aa9d4998..b8fdf191b8f6 100644 --- a/arch/m68knommu/Makefile +++ b/arch/m68knommu/Makefile @@ -14,6 +14,7 @@ platform-$(CONFIG_M68VZ328) := 68VZ328 platform-$(CONFIG_M68360) := 68360 platform-$(CONFIG_M5206) := 5206 platform-$(CONFIG_M5206e) := 5206e +platform-$(CONFIG_M523x) := 523x platform-$(CONFIG_M5249) := 5249 platform-$(CONFIG_M527x) := 527x platform-$(CONFIG_M5272) := 5272 @@ -29,6 +30,7 @@ board-$(CONFIG_UCQUICC) := uCquicc board-$(CONFIG_DRAGEN2) := de2 board-$(CONFIG_ARNEWSH) := ARNEWSH board-$(CONFIG_MOTOROLA) := MOTOROLA +board-$(CONFIG_M5235EVB) := M5235EVB board-$(CONFIG_M5271EVB) := M5271EVB board-$(CONFIG_M5275EVB) := M5275EVB board-$(CONFIG_M5282EVB) := M5282EVB @@ -39,6 +41,7 @@ board-$(CONFIG_SECUREEDGEMP3) := MP3 board-$(CONFIG_CLEOPATRA) := CLEOPATRA board-$(CONFIG_senTec) := senTec board-$(CONFIG_SNEHA) := SNEHA +board-$(CONFIG_MOD5272) := MOD5272 BOARD := $(board-y) model-$(CONFIG_RAMKERNEL) := ram @@ -53,6 +56,7 @@ MODEL := $(model-y) # cpuclass-$(CONFIG_M5206) := 5307 cpuclass-$(CONFIG_M5206e) := 5307 +cpuclass-$(CONFIG_M523x) := 5307 cpuclass-$(CONFIG_M5249) := 5307 cpuclass-$(CONFIG_M527x) := 5307 cpuclass-$(CONFIG_M5272) := 5307 @@ -76,6 +80,7 @@ export PLATFORM BOARD MODEL CPUCLASS # cflags-$(CONFIG_M5206) := -m5200 -Wa,-S -Wa,-m5200 cflags-$(CONFIG_M5206e) := -m5200 -Wa,-S -Wa,-m5200 +cflags-$(CONFIG_M523x) := -m5307 -Wa,-S -Wa,-m5307 cflags-$(CONFIG_M5249) := -m5200 -Wa,-S -Wa,-m5200 cflags-$(CONFIG_M527x) := -m5307 -Wa,-S -Wa,-m5307 cflags-$(CONFIG_M5272) := -m5307 -Wa,-S -Wa,-m5307 @@ -97,21 +102,11 @@ CFLAGS += -DUTS_SYSNAME=\"uClinux\" head-y := arch/m68knommu/platform/$(cpuclass-y)/head.o -CLEAN_FILES := include/asm-$(ARCH)/asm-offsets.h \ - arch/$(ARCH)/kernel/asm-offsets.s - core-y += arch/m68knommu/kernel/ \ arch/m68knommu/mm/ \ $(CLASSDIR) \ arch/m68knommu/platform/$(PLATFORM)/ libs-y += arch/m68knommu/lib/ -prepare: include/asm-$(ARCH)/asm-offsets.h - archclean: - $(call descend arch/$(ARCH)/boot, subdirclean) - -include/asm-$(ARCH)/asm-offsets.h: arch/$(ARCH)/kernel/asm-offsets.s \ - include/asm include/linux/version.h \ - include/config/MARKER - $(call filechk,gen-asm-offsets) + $(Q)$(MAKE) $(clean)=arch/m68knommu/boot diff --git a/arch/m68knommu/defconfig b/arch/m68knommu/defconfig index e4bd31be966a..87f2d6587c56 100644 --- a/arch/m68knommu/defconfig +++ b/arch/m68knommu/defconfig @@ -1,24 +1,48 @@ # # Automatically generated make config: don't edit +# Linux kernel version: 2.6.13-uc0 +# Wed Aug 31 15:03:26 2005 # +CONFIG_M68KNOMMU=y # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # -# CONFIG_SYSVIPC is not set +CONFIG_LOCALVERSION="" +# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_SYSCTL is not set -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +# CONFIG_KOBJECT_UEVENT is not set +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -34,9 +58,11 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_M68360 is not set # CONFIG_M5206 is not set # CONFIG_M5206e is not set +# CONFIG_M523x is not set # CONFIG_M5249 is not set -# CONFIG_M527x is not set +# CONFIG_M5271 is not set CONFIG_M5272=y +# CONFIG_M5275 is not set # CONFIG_M528x is not set # CONFIG_M5307 is not set # CONFIG_M5407 is not set @@ -54,6 +80,8 @@ CONFIG_COLDFIRE=y # CONFIG_CLOCK_50MHz is not set # CONFIG_CLOCK_54MHz is not set # CONFIG_CLOCK_60MHz is not set +# CONFIG_CLOCK_62_5MHz is not set +# CONFIG_CLOCK_64MHz is not set CONFIG_CLOCK_66MHz=y # CONFIG_CLOCK_70MHz is not set # CONFIG_CLOCK_100MHz is not set @@ -65,13 +93,19 @@ CONFIG_CLOCK_66MHz=y # Platform # CONFIG_M5272C3=y +# CONFIG_COBRA5272 is not set +# CONFIG_CANCam is not set +# CONFIG_SCALES is not set # CONFIG_NETtel is not set +# CONFIG_CPU16B is not set +# CONFIG_MOD5272 is not set CONFIG_MOTOROLA=y # CONFIG_LARGE_ALLOCS is not set -# CONFIG_RAMAUTO is not set +CONFIG_4KSTACKS=y +CONFIG_RAMAUTO=y # CONFIG_RAM4MB is not set # CONFIG_RAM8MB is not set -CONFIG_RAM16MB=y +# CONFIG_RAM16MB is not set # CONFIG_RAM32MB is not set CONFIG_RAMAUTOBIT=y # CONFIG_RAM8BIT is not set @@ -79,20 +113,34 @@ CONFIG_RAMAUTOBIT=y # CONFIG_RAM32BIT is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set -# CONFIG_HIMEMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set -# CONFIG_HOTPLUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# # # Executable file formats # -CONFIG_KCORE_AOUT=y CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set # # Power management options @@ -100,12 +148,82 @@ CONFIG_BINFMT_FLAT=y # CONFIG_PM is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# # Memory Technology Devices (MTD) # CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set -CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set @@ -116,35 +234,50 @@ CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set +# CONFIG_INFTL is not set # # RAM/ROM/Flash chip drivers # # CONFIG_MTD_CFI is not set # CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # +# CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_SNAPGEARuC is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # # CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set # # NAND Flash Device Drivers @@ -159,21 +292,32 @@ CONFIG_MTD_UCLINUX=y # # Plug and Play support # -# CONFIG_PNP is not set # # Block devices # # CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set -# CONFIG_BLK_DEV_BLKMEM is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set # -# ATA/IDE/MFM/RLL support +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support # # CONFIG_IDE is not set @@ -190,249 +334,230 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # # Fusion MPT device support # +# CONFIG_FUSION is not set # -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -# CONFIG_FILTER is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_XFRM_USER is not set -# CONFIG_IPV6 is not set - -# -# SCTP Configuration (EXPERIMENTAL) +# IEEE 1394 (FireWire) support # -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set # -# QoS and/or fair queueing +# I2O device support # -# CONFIG_NET_SCHED is not set # -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_NE2000 is not set +# CONFIG_NET_PCI is not set CONFIG_FEC=y +# CONFIG_FEC2 is not set # # Ethernet (1000 Mbit) # + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set # CONFIG_PPP_ASYNC is not set # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set # CONFIG_PPP_BSDCOMP is not set # CONFIG_PPPOE is not set # CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # -# Wireless LAN (non-hamradio) +# ISDN subsystem # -# CONFIG_NET_RADIO is not set +# CONFIG_ISDN is not set # -# Token Ring devices (depends on LLC=y) +# Telephony Support # -# CONFIG_SHAPER is not set +# CONFIG_PHONE is not set # -# Wan interfaces +# Input device support # -# CONFIG_WAN is not set +# CONFIG_INPUT is not set # -# Amateur Radio support +# Hardware I/O ports # -# CONFIG_HAMRADIO is not set +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set # -# IrDA (infrared) support +# Character devices # -# CONFIG_IRDA is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_LEDMAN is not set +# CONFIG_RESETSWITCH is not set # -# ISDN subsystem +# Serial drivers # -# CONFIG_ISDN_BOOL is not set +# CONFIG_SERIAL_8250 is not set # -# Telephony Support +# Non-8250 serial port support # -# CONFIG_PHONE is not set +CONFIG_SERIAL_COLDFIRE=y +# CONFIG_UNIX98_PTYS is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 # -# Input device support +# IPMI # -CONFIG_INPUT=y +# CONFIG_IPMI_HANDLER is not set # -# Userland interfaces +# Watchdog Cards # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set +# CONFIG_WATCHDOG is not set +# CONFIG_MCFWATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set # -# Input I/O drivers +# Ftape, the floppy tape device driver # -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set +# CONFIG_RAW_DRIVER is not set # -# Input Device Drivers +# TPM devices # -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_MCF_QSPI is not set +# CONFIG_M41T11M6 is not set # -# Character devices +# I2C support # -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_RESETSWITCH is not set +# CONFIG_I2C is not set +# CONFIG_I2C_SENSOR is not set # -# Serial drivers +# Dallas's 1-wire bus # -# CONFIG_SERIAL_8250 is not set +# CONFIG_W1 is not set # -# Non-8250 serial port support +# Hardware Monitoring support # -CONFIG_SERIAL_COLDFIRE=y -# CONFIG_UNIX98_PTYS is not set +# CONFIG_HWMON is not set # -# I2C support +# Misc devices # -# CONFIG_I2C is not set # -# I2C Hardware Sensors Mainboard support +# Multimedia devices # +# CONFIG_VIDEO_DEV is not set # -# I2C Hardware Sensors Chip support +# Digital Video Broadcasting Devices # +# CONFIG_DVB is not set # -# Mice +# Graphics support # -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set +# CONFIG_FB is not set # -# IPMI +# SPI support # -# CONFIG_IPMI_HANDLER is not set +# CONFIG_SPI is not set # -# Watchdog Cards +# Sound # -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set +# CONFIG_SOUND is not set # -# Ftape, the floppy tape device driver +# USB support # -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set # -# Multimedia devices +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# + +# +# SN Devices # -# CONFIG_VIDEO_DEV is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set + +# +# XFS support +# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y +CONFIG_MAGIC_ROM_PTR=y +# CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -445,15 +570,17 @@ CONFIG_ROMFS_FS=y # # DOS/FAT/NT Filesystems # -# CONFIG_FAT_FS is not set +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y -# CONFIG_DEVFS_FS is not set +CONFIG_SYSFS=y # CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # @@ -462,6 +589,7 @@ CONFIG_RAMFS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set @@ -479,12 +607,10 @@ CONFIG_RAMFS=y # # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set -# CONFIG_EXPORTFS is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set # @@ -494,30 +620,19 @@ CONFIG_RAMFS=y CONFIG_MSDOS_PARTITION=y # -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# - -# -# Bluetooth support +# Native Language Support # -# CONFIG_BT is not set +# CONFIG_NLS is not set # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_FULLDEBUG is not set -# CONFIG_MAGIC_SYSRQ is not set # CONFIG_HIGHPROFILE is not set +# CONFIG_BOOTPARAM is not set # CONFIG_DUMPTOFLASH is not set # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -525,6 +640,7 @@ CONFIG_MSDOS_PARTITION=y # # Security options # +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # @@ -533,6 +649,12 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_CRYPTO is not set # +# Hardware crypto devices +# + +# # Library routines # +# CONFIG_CRC_CCITT is not set # CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c index 557238596dcb..a220345e9746 100644 --- a/arch/m68knommu/kernel/setup.c +++ b/arch/m68knommu/kernel/setup.c @@ -6,7 +6,7 @@ * Copyleft ()) 2000 James D. Schettine {james@telos-systems.com} * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> * Copyright (C) 1995 Hamish Macdonald - * Copyright (C) 2000 Lineo Inc. (www.lineo.com) + * Copyright (C) 2000 Lineo Inc. (www.lineo.com) * Copyright (C) 2001 Lineo, Inc. <www.lineo.com> * * 68VZ328 Fixes/support Evan Stawnyczy <e@lineo.ca> @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/fs.h> #include <linux/fb.h> +#include <linux/module.h> #include <linux/console.h> #include <linux/genhd.h> #include <linux/errno.h> @@ -45,6 +46,9 @@ unsigned long rom_length; unsigned long memory_start; unsigned long memory_end; +EXPORT_SYMBOL(memory_start); +EXPORT_SYMBOL(memory_end); + char command_line[COMMAND_LINE_SIZE]; /* setup some dummy routines */ @@ -103,15 +107,21 @@ void (*mach_power_off)( void ) = NULL; #if defined(CONFIG_M5206e) #define CPU "COLDFIRE(m5206e)" #endif +#if defined(CONFIG_M523x) + #define CPU "COLDFIRE(m523x)" +#endif #if defined(CONFIG_M5249) #define CPU "COLDFIRE(m5249)" #endif -#if defined(CONFIG_M527x) - #define CPU "COLDFIRE(m5270/5271/5274/5275)" +#if defined(CONFIG_M5271) + #define CPU "COLDFIRE(m5270/5271)" #endif #if defined(CONFIG_M5272) #define CPU "COLDFIRE(m5272)" #endif +#if defined(CONFIG_M5275) + #define CPU "COLDFIRE(m5274/5275)" +#endif #if defined(CONFIG_M528x) #define CPU "COLDFIRE(m5280/5282)" #endif @@ -152,7 +162,7 @@ void setup_arch(char **cmdline_p) init_mm.start_code = (unsigned long) &_stext; init_mm.end_code = (unsigned long) &_etext; init_mm.end_data = (unsigned long) &_edata; - init_mm.brk = (unsigned long) 0; + init_mm.brk = (unsigned long) 0; config_BSP(&command_line[0], sizeof(command_line)); @@ -171,7 +181,7 @@ void setup_arch(char **cmdline_p) #endif #ifdef CONFIG_ELITE printk(KERN_INFO "Modified for M5206eLITE by Rob Scott, rscott@mtrob.fdns.net\n"); -#endif +#endif #ifdef CONFIG_TELOS printk(KERN_INFO "Modified for Omnia ToolVox by James D. Schettine, james@telos-systems.com\n"); #endif @@ -200,6 +210,9 @@ void setup_arch(char **cmdline_p) #ifdef CONFIG_DRAGEN2 printk(KERN_INFO "DragonEngine II board support by Georges Menie\n"); #endif +#ifdef CONFIG_M5235EVB + printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)"); +#endif #ifdef DEBUG printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x " @@ -223,7 +236,7 @@ void setup_arch(char **cmdline_p) saved_command_line[COMMAND_LINE_SIZE-1] = 0; #ifdef DEBUG - if (strlen(*cmdline_p)) + if (strlen(*cmdline_p)) printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p); #endif diff --git a/arch/m68knommu/kernel/signal.c b/arch/m68knommu/kernel/signal.c index 30dceb59a462..43a2726c0d0a 100644 --- a/arch/m68knommu/kernel/signal.c +++ b/arch/m68knommu/kernel/signal.c @@ -732,13 +732,12 @@ handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info, if (ka->sa.sa_flags & SA_ONESHOT) ka->sa.sa_handler = SIG_DFL; - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); } /* diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c index 5c3ca671627c..b17c1ecba966 100644 --- a/arch/m68knommu/kernel/time.c +++ b/arch/m68knommu/kernel/time.c @@ -68,7 +68,7 @@ static irqreturn_t timer_interrupt(int irq, void *dummy, struct pt_regs * regs) * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { @@ -178,10 +178,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c index ad7dc6347f19..5bc068462864 100644 --- a/arch/m68knommu/kernel/traps.c +++ b/arch/m68knommu/kernel/traps.c @@ -21,6 +21,7 @@ #include <linux/signal.h> #include <linux/kernel.h> #include <linux/mm.h> +#include <linux/module.h> #include <linux/types.h> #include <linux/a.out.h> #include <linux/user.h> @@ -38,7 +39,7 @@ #include <asm/machdep.h> #include <asm/siginfo.h> -static char *vec_names[] = { +static char const * const vec_names[] = { "RESET SP", "RESET PC", "BUS ERROR", "ADDRESS ERROR", "ILLEGAL INSTRUCTION", "ZERO DIVIDE", "CHK", "TRAPcc", "PRIVILEGE VIOLATION", "TRACE", "LINE 1010", "LINE 1111", @@ -106,17 +107,20 @@ asmlinkage void buserr_c(struct frame *fp) int kstack_depth_to_print = 48; -void show_stack(struct task_struct *task, unsigned long *esp) +void show_stack(struct task_struct *task, unsigned long *stack) { - unsigned long *stack, *endstack, addr; + unsigned long *endstack, addr; extern char _start, _etext; int i; - if (esp == NULL) - esp = (unsigned long *) &esp; + if (!stack) { + if (task) + stack = (unsigned long *)task->thread.ksp; + else + stack = (unsigned long *)&stack; + } - stack = esp; - addr = (unsigned long) esp; + addr = (unsigned long) stack; endstack = (unsigned long *) PAGE_ALIGN(addr); printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack); @@ -306,6 +310,8 @@ void dump_stack(void) show_stack(current, &stack); } +EXPORT_SYMBOL(dump_stack); + #ifdef CONFIG_M68KFPU_EMU asmlinkage void fpemu_signal(int signal, int code, void *addr) { diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index 31cb12892da5..47f06787190d 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -107,7 +107,7 @@ */ #if defined(CONFIG_ELITE) #define RAM_START 0x30020000 -#define RAM_END 0xe0000 +#define RAM_LENGTH 0xe0000 #endif /* @@ -118,7 +118,8 @@ #if defined(CONFIG_M5206eC3) || defined(CONFIG_M5249C3) || \ defined(CONFIG_M5272C3) || defined(CONFIG_M5307C3) || \ defined(CONFIG_ARN5307) || defined(CONFIG_M5407C3) || \ - defined(CONFIG_M5271EVB) || defined(CONFIG_M5275EVB) + defined(CONFIG_M5271EVB) || defined(CONFIG_M5275EVB) || \ + defined(CONFIG_M5235EVB) #define RAM_START 0x20000 #define RAM_LENGTH 0x3e0000 #endif @@ -145,6 +146,16 @@ #define RAM_LENGTH 0x3f0000 #endif + +/* + * The EMAC SoM-5282EM module. + */ +#if defined(CONFIG_SOM5282EM) +#define RAM_START 0x10000 +#define RAM_LENGTH 0xff0000 +#endif + + /* * These flash boot boards use all of ram for operation. Again the * actual memory size is not important here, assume at least 4MiB. @@ -158,7 +169,7 @@ #endif /* - * Sneha Boards mimimun memmory + * Sneha Boards mimimun memory * The end of RAM will vary depending on how much ram is fitted, * but this isn't important here, we assume at least 4MiB. */ @@ -167,6 +178,12 @@ #define RAM_LENGTH 0x3e0000 #endif +#if defined(CONFIG_MOD5272) +#define RAM_START 0x02000000 +#define RAM_LENGTH 0x00800000 +#define RAMVEC_START 0x20000000 +#define RAMVEC_LENGTH 0x00000400 +#endif #if defined(CONFIG_RAMKERNEL) #define TEXT ram diff --git a/arch/m68knommu/platform/523x/Makefile b/arch/m68knommu/platform/523x/Makefile new file mode 100644 index 000000000000..c1578b016160 --- /dev/null +++ b/arch/m68knommu/platform/523x/Makefile @@ -0,0 +1,19 @@ +# +# Makefile for the m68knommu linux kernel. +# + +# +# If you want to play with the HW breakpoints then you will +# need to add define this, which will give you a stack backtrace +# on the console port whenever a DBG interrupt occurs. You have to +# set up you HW breakpoints to trigger a DBG interrupt: +# +# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT +# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# + +ifdef CONFIG_FULLDEBUG +AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1 +endif + +obj-y := config.o diff --git a/arch/m68knommu/platform/523x/config.c b/arch/m68knommu/platform/523x/config.c new file mode 100644 index 000000000000..22767ce506e0 --- /dev/null +++ b/arch/m68knommu/platform/523x/config.c @@ -0,0 +1,82 @@ +/***************************************************************************/ + +/* + * linux/arch/m68knommu/platform/523x/config.c + * + * Sub-architcture dependant initialization code for the Freescale + * 523x CPUs. + * + * Copyright (C) 1999-2005, Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com) + */ + +/***************************************************************************/ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/param.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <asm/dma.h> +#include <asm/traps.h> +#include <asm/machdep.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfdma.h> + +/***************************************************************************/ + +void coldfire_pit_tick(void); +void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); +unsigned long coldfire_pit_offset(void); +void coldfire_trap_init(void); +void coldfire_reset(void); + +/***************************************************************************/ + +/* + * DMA channel base address table. + */ +unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = { + MCF_MBAR + MCFDMA_BASE0, +}; + +unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; + +/***************************************************************************/ + +void mcf_disableall(void) +{ + *((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff; + *((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL)) = 0xffffffff; +} + +/***************************************************************************/ + +void mcf_autovector(unsigned int vec) +{ + /* Everything is auto-vectored on the 5272 */ +} + +/***************************************************************************/ + +void config_BSP(char *commandp, int size) +{ + mcf_disableall(); + +#ifdef CONFIG_BOOTPARAM + strncpy(commandp, CONFIG_BOOTPARAM_STRING, size); + commandp[size-1] = 0; +#else + memset(commandp, 0, size); +#endif + + mach_sched_init = coldfire_pit_init; + mach_tick = coldfire_pit_tick; + mach_gettimeoffset = coldfire_pit_offset; + mach_trap_init = coldfire_trap_init; + mach_reset = coldfire_reset; +} + +/***************************************************************************/ diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c index 5cb28690f89a..cf36e7d007b9 100644 --- a/arch/m68knommu/platform/5272/config.c +++ b/arch/m68knommu/platform/5272/config.c @@ -104,11 +104,11 @@ int mcf_timerirqpending(int timer) void config_BSP(char *commandp, int size) { -#if 0 - volatile unsigned long *pivrp; +#if defined (CONFIG_MOD5272) + volatile unsigned char *pivrp; /* Set base of device vectors to be 64 */ - pivrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PIVR); + pivrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_PIVR); *pivrp = 0x40; #endif diff --git a/arch/m68knommu/platform/5307/Makefile b/arch/m68knommu/platform/5307/Makefile index 84b6b70641e1..6fe5a2b8fb08 100644 --- a/arch/m68knommu/platform/5307/Makefile +++ b/arch/m68knommu/platform/5307/Makefile @@ -19,6 +19,7 @@ endif obj-$(CONFIG_COLDFIRE) += entry.o vectors.o ints.o obj-$(CONFIG_M5206) += timers.o obj-$(CONFIG_M5206e) += timers.o +obj-$(CONFIG_M523x) += pit.o obj-$(CONFIG_M5249) += timers.o obj-$(CONFIG_M527x) += pit.o obj-$(CONFIG_M5272) += timers.o diff --git a/arch/m68knommu/platform/5307/head.S b/arch/m68knommu/platform/5307/head.S index c7d7a395c4cc..7f4ba837901f 100644 --- a/arch/m68knommu/platform/5307/head.S +++ b/arch/m68knommu/platform/5307/head.S @@ -39,14 +39,18 @@ * Memory size exceptions for special cases. Some boards may be set * for auto memory sizing, but we can't do it that way for some reason. * For example the 5206eLITE board has static RAM, and auto-detecting - * the SDRAM will do you no good at all. + * the SDRAM will do you no good at all. Same goes for the MOD5272. */ #ifdef CONFIG_RAMAUTO #if defined(CONFIG_M5206eLITE) -#define MEM_SIZE 0x00100000 /* 1MiB default memory */ +#define MEM_SIZE 0x00100000 /* 1MiB default memory */ +#endif +#if defined(CONFIG_MOD5272) +#define MEM_SIZE 0x00800000 /* 8MiB default memory */ #endif #endif /* CONFIG_RAMAUTO */ + /* * If we don't have a fixed memory size now, then lets build in code * to auto detect the DRAM size. Obviously this is the prefered @@ -100,11 +104,15 @@ /* * Most ColdFire boards have their DRAM starting at address 0. - * Notable exception is the 5206eLITE board. + * Notable exception is the 5206eLITE board, another is the MOD5272. */ #if defined(CONFIG_M5206eLITE) #define MEM_BASE 0x30000000 #endif +#if defined(CONFIG_MOD5272) +#define MEM_BASE 0x02000000 +#define VBR_BASE 0x20000000 /* vectors in SRAM */ +#endif #ifndef MEM_BASE #define MEM_BASE 0x00000000 /* memory base at address 0 */ @@ -188,6 +196,7 @@ _start: movel %a7,_rambase GET_MEM_SIZE /* macro code determines size */ + addl %a7,%d0 movel %d0,_ramend /* set end ram addr */ /* diff --git a/arch/m68knommu/platform/68328/config.c b/arch/m68knommu/platform/68328/config.c index fd7c93f86481..bcfa5d7fe1e2 100644 --- a/arch/m68knommu/platform/68328/config.c +++ b/arch/m68knommu/platform/68328/config.c @@ -1,5 +1,7 @@ +/***************************************************************************/ + /* - * linux/arch/$(ARCH)/platform/$(PLATFORM)/config.c + * linux/arch/m68knommu/platform/68328/config.c * * Copyright (C) 1993 Hamish Macdonald * Copyright (C) 1999 D. Jeff Dionne @@ -11,6 +13,8 @@ * VZ Support/Fixes Evan Stawnyczy <e@lineo.ca> */ +/***************************************************************************/ + #include <asm/dbg.h> #include <stdarg.h> #include <linux/config.h> @@ -29,76 +33,16 @@ #include <asm/machdep.h> #include <asm/MC68328.h> +/***************************************************************************/ -void BSP_sched_init(irqreturn_t (*timer_routine)(int, void *, struct pt_regs *)) -{ - -#ifdef CONFIG_XCOPILOT_BUGS - /* - * The only thing I know is that CLK32 is not available on Xcopilot - * I have little idea about what frequency SYSCLK has on Xcopilot. - * The values for prescaler and compare registers were simply - * taken from the original source - */ - - /* Restart mode, Enable int, SYSCLK, Enable timer */ - TCTL2 = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_SYSCLK | TCTL_TEN; - /* Set prescaler */ - TPRER2 = 2; - /* Set compare register */ - TCMP2 = 0xd7e4; -#else - /* Restart mode, Enable int, 32KHz, Enable timer */ - TCTL2 = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN; - /* Set prescaler (Divide 32KHz by 32)*/ - TPRER2 = 31; - /* Set compare register 32Khz / 32 / 10 = 100 */ - TCMP2 = 10; -#endif - - request_irq(TMR2_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL); -} - -void BSP_tick(void) -{ - /* Reset Timer2 */ - TSTAT2 &= 0; -} +void m68328_timer_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *)); +void m68328_timer_tick(void); +unsigned long m68328_timer_gettimeoffset(void); +void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec); -unsigned long BSP_gettimeoffset (void) -{ - return 0; -} +/***************************************************************************/ -void BSP_gettod (int *yearp, int *monp, int *dayp, - int *hourp, int *minp, int *secp) -{ -} - -int BSP_hwclk(int op, struct hwclk_time *t) -{ - if (!op) { - /* read */ - } else { - /* write */ - } - return 0; -} - -int BSP_set_clock_mmss (unsigned long nowtime) -{ -#if 0 - short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60; - - tod->second1 = real_seconds / 10; - tod->second2 = real_seconds % 10; - tod->minute1 = real_minutes / 10; - tod->minute2 = real_minutes % 10; -#endif - return 0; -} - -void BSP_reset (void) +void m68328_reset (void) { local_irq_disable(); asm volatile ("moveal #0x10c00000, %a0;\n\t" @@ -108,18 +52,22 @@ void BSP_reset (void) "jmp (%a0);"); } +/***************************************************************************/ + void config_BSP(char *command, int len) { printk(KERN_INFO "\n68328 support D. Jeff Dionne <jeff@uclinux.org>\n"); printk(KERN_INFO "68328 support Kenneth Albanowski <kjahds@kjshds.com>\n"); printk(KERN_INFO "68328/Pilot support Bernhard Kuhn <kuhn@lpr.e-technik.tu-muenchen.de>\n"); - mach_sched_init = BSP_sched_init; - mach_tick = BSP_tick; - mach_gettimeoffset = BSP_gettimeoffset; - mach_gettod = BSP_gettod; + mach_sched_init = m68328_timer_init; + mach_tick = m68328_timer_tick; + mach_gettimeoffset = m68328_timer_gettimeoffset; + mach_gettod = m68328_timer_gettod; mach_hwclk = NULL; mach_set_clock_mmss = NULL; - mach_reset = BSP_reset; + mach_reset = m68328_reset; *command = '\0'; } + +/***************************************************************************/ diff --git a/arch/m68knommu/platform/68328/entry.S b/arch/m68knommu/platform/68328/entry.S index 0f5d1fe8eb5f..7d8990d784a2 100644 --- a/arch/m68knommu/platform/68328/entry.S +++ b/arch/m68knommu/platform/68328/entry.S @@ -79,7 +79,7 @@ ENTRY(system_call) movel %sp@(PT_ORIG_D0),%d0 movel %sp,%d1 /* get thread_info pointer */ - andl #0xffffe000,%d1 + andl #-THREAD_SIZE,%d1 movel %d1,%a2 btst #TIF_SYSCALL_TRACE,%a2@(TI_FLAGS) jne do_trace @@ -105,7 +105,7 @@ Luser_return: andw #ALLOWINT,%sr movel %sp,%d1 /* get thread_info pointer */ - andl #0xffffe000,%d1 + andl #-THREAD_SIZE,%d1 movel %d1,%a2 move %a2@(TI_FLAGS),%d1 /* thread_info->flags */ andl #_TIF_WORK_MASK,%d1 diff --git a/arch/m68knommu/platform/68328/head-de2.S b/arch/m68knommu/platform/68328/head-de2.S new file mode 100644 index 000000000000..94c5a1609a75 --- /dev/null +++ b/arch/m68knommu/platform/68328/head-de2.S @@ -0,0 +1,135 @@ +#include <linux/config.h> + +#if defined(CONFIG_RAM32MB) +#define MEM_END 0x02000000 /* Memory size 32Mb */ +#elif defined(CONFIG_RAM16MB) +#define MEM_END 0x01000000 /* Memory size 16Mb */ +#else +#define MEM_END 0x00800000 /* Memory size 8Mb */ +#endif + +#undef CRT_DEBUG + +.macro PUTC CHAR +#ifdef CRT_DEBUG + moveq #\CHAR, %d7 + jsr putc +#endif +.endm + + .global _start + .global _rambase + .global _ramvec + .global _ramstart + .global _ramend + + .data + +/* + * Set up the usable of RAM stuff + */ +_rambase: + .long 0 +_ramvec: + .long 0 +_ramstart: + .long 0 +_ramend: + .long 0 + + .text + +_start: + +/* + * Setup initial stack + */ + /* disable all interrupts */ + movew #0x2700, %sr + movel #-1, 0xfffff304 + movel #MEM_END-4, %sp + + PUTC '\r' + PUTC '\n' + PUTC 'A' + PUTC 'B' + +/* + * Determine end of RAM + */ + + movel #MEM_END, %a0 + movel %a0, _ramend + + PUTC 'C' + +/* + * Move ROM filesystem above bss :-) + */ + + moveal #_sbss, %a0 /* romfs at the start of bss */ + moveal #_ebss, %a1 /* Set up destination */ + movel %a0, %a2 /* Copy of bss start */ + + movel 8(%a0), %d1 /* Get size of ROMFS */ + addql #8, %d1 /* Allow for rounding */ + andl #0xfffffffc, %d1 /* Whole words */ + + addl %d1, %a0 /* Copy from end */ + addl %d1, %a1 /* Copy from end */ + movel %a1, _ramstart /* Set start of ram */ + +1: + movel -(%a0), %d0 /* Copy dword */ + movel %d0, -(%a1) + cmpl %a0, %a2 /* Check if at end */ + bne 1b + + PUTC 'D' + +/* + * Initialize BSS segment to 0 + */ + + lea _sbss, %a0 + lea _ebss, %a1 + + /* Copy 0 to %a0 until %a0 == %a1 */ +2: cmpal %a0, %a1 + beq 1f + clrl (%a0)+ + bra 2b +1: + + PUTC 'E' + +/* + * Load the current task pointer and stack + */ + + lea init_thread_union, %a0 + lea 0x2000(%a0), %sp + + PUTC 'F' + PUTC '\r' + PUTC '\n' + +/* + * Go + */ + + jmp start_kernel + +/* + * Local functions + */ + +#ifdef CRT_DEBUG +putc: + moveb %d7, 0xfffff907 +1: + movew 0xfffff906, %d7 + andw #0x2000, %d7 + beq 1b + rts +#endif diff --git a/arch/m68knommu/platform/68328/timers.c b/arch/m68knommu/platform/68328/timers.c new file mode 100644 index 000000000000..68c2cd6b0030 --- /dev/null +++ b/arch/m68knommu/platform/68328/timers.c @@ -0,0 +1,106 @@ +/***************************************************************************/ + +/* + * linux/arch/m68knommu/platform/68328/timers.c + * + * Copyright (C) 1993 Hamish Macdonald + * Copyright (C) 1999 D. Jeff Dionne + * Copyright (C) 2001 Georges Menie, Ken Desmet + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +/***************************************************************************/ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <asm/setup.h> +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/irq.h> +#include <asm/machdep.h> +#include <asm/MC68VZ328.h> + +/***************************************************************************/ + +#if defined(CONFIG_DRAGEN2) +/* with a 33.16 MHz clock, this will give usec resolution to the time functions */ +#define CLOCK_SOURCE TCTL_CLKSOURCE_SYSCLK +#define CLOCK_PRE 7 +#define TICKS_PER_JIFFY 41450 + +#elif defined(CONFIG_XCOPILOT_BUGS) +/* + * The only thing I know is that CLK32 is not available on Xcopilot + * I have little idea about what frequency SYSCLK has on Xcopilot. + * The values for prescaler and compare registers were simply + * taken from the original source + */ +#define CLOCK_SOURCE TCTL_CLKSOURCE_SYSCLK +#define CLOCK_PRE 2 +#define TICKS_PER_JIFFY 0xd7e4 + +#else +/* default to using the 32Khz clock */ +#define CLOCK_SOURCE TCTL_CLKSOURCE_32KHZ +#define CLOCK_PRE 31 +#define TICKS_PER_JIFFY 10 +#endif + +/***************************************************************************/ + +void m68328_timer_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *)) +{ + /* disable timer 1 */ + TCTL = 0; + + /* set ISR */ + if (request_irq(TMR_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL)) + panic("Unable to attach timer interrupt\n"); + + /* Restart mode, Enable int, Set clock source */ + TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE; + TPRER = CLOCK_PRE; + TCMP = TICKS_PER_JIFFY; + + /* Enable timer 1 */ + TCTL |= TCTL_TEN; +} + +/***************************************************************************/ + +void m68328_timer_tick(void) +{ + /* Reset Timer1 */ + TSTAT &= 0; +} +/***************************************************************************/ + +unsigned long m68328_timer_gettimeoffset(void) +{ + unsigned long ticks = TCN, offset = 0; + + /* check for pending interrupt */ + if (ticks < (TICKS_PER_JIFFY >> 1) && (ISR & (1 << TMR_IRQ_NUM))) + offset = 1000000 / HZ; + ticks = (ticks * 1000000 / HZ) / TICKS_PER_JIFFY; + return ticks + offset; +} + +/***************************************************************************/ + +void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec) +{ + long now = RTCTIME; + + *year = *mon = *day = 1; + *hour = (now >> 24) % 24; + *min = (now >> 16) % 60; + *sec = now % 60; +} + +/***************************************************************************/ diff --git a/arch/m68knommu/platform/68360/entry.S b/arch/m68knommu/platform/68360/entry.S index f7bc80a60e0f..8ff48adf24ab 100644 --- a/arch/m68knommu/platform/68360/entry.S +++ b/arch/m68knommu/platform/68360/entry.S @@ -96,7 +96,7 @@ Luser_return: andw #ALLOWINT,%sr movel %sp,%d1 /* get thread_info pointer */ - andl #0xffffe000,%d1 + andl #-THREAD_SIZE,%d1 movel %d1,%a2 move %a2@(TI_FLAGS),%d1 /* thread_info->flags */ andl #_TIF_WORK_MASK,%d1 diff --git a/arch/m68knommu/platform/68360/head-ram.S b/arch/m68knommu/platform/68360/head-ram.S new file mode 100644 index 000000000000..a5c639a51eef --- /dev/null +++ b/arch/m68knommu/platform/68360/head-ram.S @@ -0,0 +1,408 @@ +/* arch/m68knommu/platform/68360/head-ram.S + * + * Startup code for Motorola 68360 + * + * Copyright 2001 (C) SED Systems, a Division of Calian Ltd. + * Based on: arch/m68knommu/platform/68328/pilot/crt0_rom.S + * Based on: arch/m68knommu/platform/68360/uCquicc/crt0_rom.S, 2.0.38.1.pre7 + * uClinux Kernel + * Copyright (C) Michael Leslie <mleslie@lineo.com> + * Based on: arch/m68knommu/platform/68EZ328/ucsimm/crt0_rom.S + * Copyright (C) 1998 D. Jeff Dionne <jeff@uclinux.org>, + * + */ +#define ASSEMBLY +#include <linux/config.h> + +.global _stext +.global _start + +.global _rambase +.global __ramvec +.global _ramvec +.global _ramstart +.global _ramend + +.global _quicc_base +.global _periph_base + +#define REGB 0x1000 +#define PEPAR (_dprbase + REGB + 0x0016) +#define GMR (_dprbase + REGB + 0x0040) +#define OR0 (_dprbase + REGB + 0x0054) +#define BR0 (_dprbase + REGB + 0x0050) +#define OR1 (_dprbase + REGB + 0x0064) +#define BR1 (_dprbase + REGB + 0x0060) +#define OR4 (_dprbase + REGB + 0x0094) +#define BR4 (_dprbase + REGB + 0x0090) +#define OR6 (_dprbase + REGB + 0x00b4) +#define BR6 (_dprbase + REGB + 0x00b0) +#define OR7 (_dprbase + REGB + 0x00c4) +#define BR7 (_dprbase + REGB + 0x00c0) + +#define MCR (_dprbase + REGB + 0x0000) +#define AVR (_dprbase + REGB + 0x0008) + +#define SYPCR (_dprbase + REGB + 0x0022) + +#define PLLCR (_dprbase + REGB + 0x0010) +#define CLKOCR (_dprbase + REGB + 0x000C) +#define CDVCR (_dprbase + REGB + 0x0014) + +#define BKAR (_dprbase + REGB + 0x0030) +#define BKCR (_dprbase + REGB + 0x0034) +#define SWIV (_dprbase + REGB + 0x0023) +#define PICR (_dprbase + REGB + 0x0026) +#define PITR (_dprbase + REGB + 0x002A) + +/* Define for all memory configuration */ +#define MCU_SIM_GMR 0x00000000 +#define SIM_OR_MASK 0x0fffffff + +/* Defines for chip select zero - the flash */ +#define SIM_OR0_MASK 0x20000002 +#define SIM_BR0_MASK 0x00000001 + + +/* Defines for chip select one - the RAM */ +#define SIM_OR1_MASK 0x10000000 +#define SIM_BR1_MASK 0x00000001 + +#define MCU_SIM_MBAR_ADRS 0x0003ff00 +#define MCU_SIM_MBAR_BA_MASK 0xfffff000 +#define MCU_SIM_MBAR_AS_MASK 0x00000001 + +#define MCU_SIM_PEPAR 0x00B4 + +#define MCU_DISABLE_INTRPTS 0x2700 +#define MCU_SIM_AVR 0x00 + +#define MCU_SIM_MCR 0x00005cff + +#define MCU_SIM_CLKOCR 0x00 +#define MCU_SIM_PLLCR 0x8000 +#define MCU_SIM_CDVCR 0x0000 + +#define MCU_SIM_SYPCR 0x0000 +#define MCU_SIM_SWIV 0x00 +#define MCU_SIM_PICR 0x0000 +#define MCU_SIM_PITR 0x0000 + + +#include <asm/m68360_regs.h> + + +/* + * By the time this RAM specific code begins to execute, DPRAM + * and DRAM should already be mapped and accessible. + */ + + .text +_start: +_stext: + nop + ori.w #MCU_DISABLE_INTRPTS, %sr /* disable interrupts: */ + /* We should not need to setup the boot stack the reset should do it. */ + movea.l #__ramend, %sp /*set up stack at the end of DRAM:*/ + +set_mbar_register: + moveq.l #0x07, %d1 /* Setup MBAR */ + movec %d1, %dfc + + lea.l MCU_SIM_MBAR_ADRS, %a0 + move.l #_dprbase, %d0 + andi.l #MCU_SIM_MBAR_BA_MASK, %d0 + ori.l #MCU_SIM_MBAR_AS_MASK, %d0 + moves.l %d0, %a0@ + + moveq.l #0x05, %d1 + movec.l %d1, %dfc + + /* Now we can begin to access registers in DPRAM */ + +set_sim_mcr: + /* Set Module Configuration Register */ + move.l #MCU_SIM_MCR, MCR + + /* to do: Determine cause of reset */ + + /* + * configure system clock MC68360 p. 6-40 + * (value +1)*osc/128 = system clock + */ +set_sim_clock: + move.w #MCU_SIM_PLLCR, PLLCR + move.b #MCU_SIM_CLKOCR, CLKOCR + move.w #MCU_SIM_CDVCR, CDVCR + + /* Wait for the PLL to settle */ + move.w #16384, %d0 +pll_settle_wait: + subi.w #1, %d0 + bne pll_settle_wait + + /* Setup the system protection register, and watchdog timer register */ + move.b #MCU_SIM_SWIV, SWIV + move.w #MCU_SIM_PICR, PICR + move.w #MCU_SIM_PITR, PITR + move.w #MCU_SIM_SYPCR, SYPCR + + /* Clear DPRAM - system + parameter */ + movea.l #_dprbase, %a0 + movea.l #_dprbase+0x2000, %a1 + + /* Copy 0 to %a0 until %a0 == %a1 */ +clear_dpram: + movel #0, %a0@+ + cmpal %a0, %a1 + bhi clear_dpram + +configure_memory_controller: + /* Set up Global Memory Register (GMR) */ + move.l #MCU_SIM_GMR, %d0 + move.l %d0, GMR + +configure_chip_select_0: + move.l #__ramend, %d0 + subi.l #__ramstart, %d0 + subq.l #0x01, %d0 + eori.l #SIM_OR_MASK, %d0 + ori.l #SIM_OR0_MASK, %d0 + move.l %d0, OR0 + + move.l #__ramstart, %d0 + ori.l #SIM_BR0_MASK, %d0 + move.l %d0, BR0 + +configure_chip_select_1: + move.l #__rom_end, %d0 + subi.l #__rom_start, %d0 + subq.l #0x01, %d0 + eori.l #SIM_OR_MASK, %d0 + ori.l #SIM_OR1_MASK, %d0 + move.l %d0, OR1 + + move.l #__rom_start, %d0 + ori.l #SIM_BR1_MASK, %d0 + move.l %d0, BR1 + + move.w #MCU_SIM_PEPAR, PEPAR + + /* point to vector table: */ + move.l #_romvec, %a0 + move.l #_ramvec, %a1 +copy_vectors: + move.l %a0@, %d0 + move.l %d0, %a1@ + move.l %a0@, %a1@ + addq.l #0x04, %a0 + addq.l #0x04, %a1 + cmp.l #_start, %a0 + blt copy_vectors + + move.l #_ramvec, %a1 + movec %a1, %vbr + + + /* Copy data segment from ROM to RAM */ + moveal #_stext, %a0 + moveal #_sdata, %a1 + moveal #_edata, %a2 + + /* Copy %a0 to %a1 until %a1 == %a2 */ +LD1: + move.l %a0@, %d0 + addq.l #0x04, %a0 + move.l %d0, %a1@ + addq.l #0x04, %a1 + cmp.l #_edata, %a1 + blt LD1 + + moveal #_sbss, %a0 + moveal #_ebss, %a1 + + /* Copy 0 to %a0 until %a0 == %a1 */ +L1: + movel #0, %a0@+ + cmpal %a0, %a1 + bhi L1 + +load_quicc: + move.l #_dprbase, _quicc_base + +store_ram_size: + /* Set ram size information */ + move.l #_sdata, _rambase + move.l #_ebss, _ramstart + move.l #__ramend, %d0 + sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/ + move.l %d0, _ramend /* Different from __ramend.*/ + +store_flash_size: + /* Set rom size information */ + move.l #__rom_end, %d0 + sub.l #__rom_start, %d0 + move.l %d0, rom_length + + pea 0 + pea env + pea %sp@(4) + pea 0 + + lea init_thread_union, %a2 + lea 0x2000(%a2), %sp + +lp: + jsr start_kernel + +_exit: + jmp _exit + + + .data + .align 4 +env: + .long 0 +_quicc_base: + .long 0 +_periph_base: + .long 0 +_ramvec: + .long 0 +_rambase: + .long 0 +_ramstart: + .long 0 +_ramend: + .long 0 +_dprbase: + .long 0xffffe000 + + .text + + /* + * These are the exception vectors at boot up, they are copied into RAM + * and then overwritten as needed. + */ + +.section ".data.initvect","awx" + .long __ramend /* Reset: Initial Stack Pointer - 0. */ + .long _start /* Reset: Initial Program Counter - 1. */ + .long buserr /* Bus Error - 2. */ + .long trap /* Address Error - 3. */ + .long trap /* Illegal Instruction - 4. */ + .long trap /* Divide by zero - 5. */ + .long trap /* CHK, CHK2 Instructions - 6. */ + .long trap /* TRAPcc, TRAPV Instructions - 7. */ + .long trap /* Privilege Violation - 8. */ + .long trap /* Trace - 9. */ + .long trap /* Line 1010 Emulator - 10. */ + .long trap /* Line 1111 Emualtor - 11. */ + .long trap /* Harware Breakpoint - 12. */ + .long trap /* (Reserved for Coprocessor Protocol Violation)- 13. */ + .long trap /* Format Error - 14. */ + .long trap /* Uninitialized Interrupt - 15. */ + .long trap /* (Unassigned, Reserver) - 16. */ + .long trap /* (Unassigned, Reserver) - 17. */ + .long trap /* (Unassigned, Reserver) - 18. */ + .long trap /* (Unassigned, Reserver) - 19. */ + .long trap /* (Unassigned, Reserver) - 20. */ + .long trap /* (Unassigned, Reserver) - 21. */ + .long trap /* (Unassigned, Reserver) - 22. */ + .long trap /* (Unassigned, Reserver) - 23. */ + .long trap /* Spurious Interrupt - 24. */ + .long trap /* Level 1 Interrupt Autovector - 25. */ + .long trap /* Level 2 Interrupt Autovector - 26. */ + .long trap /* Level 3 Interrupt Autovector - 27. */ + .long trap /* Level 4 Interrupt Autovector - 28. */ + .long trap /* Level 5 Interrupt Autovector - 29. */ + .long trap /* Level 6 Interrupt Autovector - 30. */ + .long trap /* Level 7 Interrupt Autovector - 31. */ + .long system_call /* Trap Instruction Vectors 0 - 32. */ + .long trap /* Trap Instruction Vectors 1 - 33. */ + .long trap /* Trap Instruction Vectors 2 - 34. */ + .long trap /* Trap Instruction Vectors 3 - 35. */ + .long trap /* Trap Instruction Vectors 4 - 36. */ + .long trap /* Trap Instruction Vectors 5 - 37. */ + .long trap /* Trap Instruction Vectors 6 - 38. */ + .long trap /* Trap Instruction Vectors 7 - 39. */ + .long trap /* Trap Instruction Vectors 8 - 40. */ + .long trap /* Trap Instruction Vectors 9 - 41. */ + .long trap /* Trap Instruction Vectors 10 - 42. */ + .long trap /* Trap Instruction Vectors 11 - 43. */ + .long trap /* Trap Instruction Vectors 12 - 44. */ + .long trap /* Trap Instruction Vectors 13 - 45. */ + .long trap /* Trap Instruction Vectors 14 - 46. */ + .long trap /* Trap Instruction Vectors 15 - 47. */ + .long 0 /* (Reserved for Coprocessor) - 48. */ + .long 0 /* (Reserved for Coprocessor) - 49. */ + .long 0 /* (Reserved for Coprocessor) - 50. */ + .long 0 /* (Reserved for Coprocessor) - 51. */ + .long 0 /* (Reserved for Coprocessor) - 52. */ + .long 0 /* (Reserved for Coprocessor) - 53. */ + .long 0 /* (Reserved for Coprocessor) - 54. */ + .long 0 /* (Reserved for Coprocessor) - 55. */ + .long 0 /* (Reserved for Coprocessor) - 56. */ + .long 0 /* (Reserved for Coprocessor) - 57. */ + .long 0 /* (Reserved for Coprocessor) - 58. */ + .long 0 /* (Unassigned, Reserved) - 59. */ + .long 0 /* (Unassigned, Reserved) - 60. */ + .long 0 /* (Unassigned, Reserved) - 61. */ + .long 0 /* (Unassigned, Reserved) - 62. */ + .long 0 /* (Unassigned, Reserved) - 63. */ + /* The assignment of these vectors to the CPM is */ + /* dependent on the configuration of the CPM vba */ + /* fields. */ + .long 0 /* (User-Defined Vectors 1) CPM Error - 64. */ + .long 0 /* (User-Defined Vectors 2) CPM Parallel IO PC11- 65. */ + .long 0 /* (User-Defined Vectors 3) CPM Parallel IO PC10- 66. */ + .long 0 /* (User-Defined Vectors 4) CPM SMC2 / PIP - 67. */ + .long 0 /* (User-Defined Vectors 5) CPM SMC1 - 68. */ + .long 0 /* (User-Defined Vectors 6) CPM SPI - 69. */ + .long 0 /* (User-Defined Vectors 7) CPM Parallel IO PC9 - 70. */ + .long 0 /* (User-Defined Vectors 8) CPM Timer 4 - 71. */ + .long 0 /* (User-Defined Vectors 9) CPM Reserved - 72. */ + .long 0 /* (User-Defined Vectors 10) CPM Parallel IO PC8- 73. */ + .long 0 /* (User-Defined Vectors 11) CPM Parallel IO PC7- 74. */ + .long 0 /* (User-Defined Vectors 12) CPM Parallel IO PC6- 75. */ + .long 0 /* (User-Defined Vectors 13) CPM Timer 3 - 76. */ + .long 0 /* (User-Defined Vectors 14) CPM Reserved - 77. */ + .long 0 /* (User-Defined Vectors 15) CPM Parallel IO PC5- 78. */ + .long 0 /* (User-Defined Vectors 16) CPM Parallel IO PC4- 79. */ + .long 0 /* (User-Defined Vectors 17) CPM Reserved - 80. */ + .long 0 /* (User-Defined Vectors 18) CPM RISC Timer Tbl - 81. */ + .long 0 /* (User-Defined Vectors 19) CPM Timer 2 - 82. */ + .long 0 /* (User-Defined Vectors 21) CPM Reserved - 83. */ + .long 0 /* (User-Defined Vectors 22) CPM IDMA2 - 84. */ + .long 0 /* (User-Defined Vectors 23) CPM IDMA1 - 85. */ + .long 0 /* (User-Defined Vectors 24) CPM SDMA Bus Err - 86. */ + .long 0 /* (User-Defined Vectors 25) CPM Parallel IO PC3- 87. */ + .long 0 /* (User-Defined Vectors 26) CPM Parallel IO PC2- 88. */ + .long 0 /* (User-Defined Vectors 27) CPM Timer 1 - 89. */ + .long 0 /* (User-Defined Vectors 28) CPM Parallel IO PC1- 90. */ + .long 0 /* (User-Defined Vectors 29) CPM SCC 4 - 91. */ + .long 0 /* (User-Defined Vectors 30) CPM SCC 3 - 92. */ + .long 0 /* (User-Defined Vectors 31) CPM SCC 2 - 93. */ + .long 0 /* (User-Defined Vectors 32) CPM SCC 1 - 94. */ + .long 0 /* (User-Defined Vectors 33) CPM Parallel IO PC0- 95. */ + /* I don't think anything uses the vectors after here. */ + .long 0 /* (User-Defined Vectors 34) - 96. */ + .long 0,0,0,0,0 /* (User-Defined Vectors 35 - 39). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 40 - 49). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 50 - 59). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 60 - 69). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 70 - 79). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 80 - 89). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 90 - 99). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 100 - 109). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 110 - 119). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 120 - 129). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 130 - 139). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 140 - 149). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 150 - 159). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 160 - 169). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 170 - 179). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 180 - 189). */ + .long 0,0,0 /* (User-Defined Vectors 190 - 192). */ +.text +ignore: rte diff --git a/arch/m68knommu/platform/68360/head-rom.S b/arch/m68knommu/platform/68360/head-rom.S new file mode 100644 index 000000000000..0da357a4cfee --- /dev/null +++ b/arch/m68knommu/platform/68360/head-rom.S @@ -0,0 +1,420 @@ +/* arch/m68knommu/platform/68360/head-rom.S + * + * Startup code for Motorola 68360 + * + * Copyright (C) SED Systems, a Division of Calian Ltd. + * Based on: arch/m68knommu/platform/68328/pilot/crt0_rom.S + * Based on: arch/m68knommu/platform/68360/uCquicc/crt0_rom.S, 2.0.38.1.pre7 + * uClinux Kernel + * Copyright (C) Michael Leslie <mleslie@lineo.com> + * Based on: arch/m68knommu/platform/68EZ328/ucsimm/crt0_rom.S + * Copyright (C) 1998 D. Jeff Dionne <jeff@uclinux.org>, + * + */ +#include <linux/config.h> + +.global _stext +.global _sbss +.global _start + +.global _rambase +.global __ramvec +.global _ramvec +.global _ramstart +.global _ramend + +.global _quicc_base +.global _periph_base + +#define REGB 0x1000 +#define PEPAR (_dprbase + REGB + 0x0016) +#define GMR (_dprbase + REGB + 0x0040) +#define OR0 (_dprbase + REGB + 0x0054) +#define BR0 (_dprbase + REGB + 0x0050) + +#define OR1 (_dprbase + REGB + 0x0064) +#define BR1 (_dprbase + REGB + 0x0060) + +#define OR2 (_dprbase + REGB + 0x0074) +#define BR2 (_dprbase + REGB + 0x0070) + +#define OR3 (_dprbase + REGB + 0x0084) +#define BR3 (_dprbase + REGB + 0x0080) + +#define OR4 (_dprbase + REGB + 0x0094) +#define BR4 (_dprbase + REGB + 0x0090) + +#define OR5 (_dprbase + REGB + 0x00A4) +#define BR5 (_dprbase + REGB + 0x00A0) + +#define OR6 (_dprbase + REGB + 0x00b4) +#define BR6 (_dprbase + REGB + 0x00b0) + +#define OR7 (_dprbase + REGB + 0x00c4) +#define BR7 (_dprbase + REGB + 0x00c0) + +#define MCR (_dprbase + REGB + 0x0000) +#define AVR (_dprbase + REGB + 0x0008) + +#define SYPCR (_dprbase + REGB + 0x0022) + +#define PLLCR (_dprbase + REGB + 0x0010) +#define CLKOCR (_dprbase + REGB + 0x000C) +#define CDVCR (_dprbase + REGB + 0x0014) + +#define BKAR (_dprbase + REGB + 0x0030) +#define BKCR (_dprbase + REGB + 0x0034) +#define SWIV (_dprbase + REGB + 0x0023) +#define PICR (_dprbase + REGB + 0x0026) +#define PITR (_dprbase + REGB + 0x002A) + +/* Define for all memory configuration */ +#define MCU_SIM_GMR 0x00000000 +#define SIM_OR_MASK 0x0fffffff + +/* Defines for chip select zero - the flash */ +#define SIM_OR0_MASK 0x20000000 +#define SIM_BR0_MASK 0x00000001 + +/* Defines for chip select one - the RAM */ +#define SIM_OR1_MASK 0x10000000 +#define SIM_BR1_MASK 0x00000001 + +#define MCU_SIM_MBAR_ADRS 0x0003ff00 +#define MCU_SIM_MBAR_BA_MASK 0xfffff000 +#define MCU_SIM_MBAR_AS_MASK 0x00000001 + +#define MCU_SIM_PEPAR 0x00B4 + +#define MCU_DISABLE_INTRPTS 0x2700 +#define MCU_SIM_AVR 0x00 + +#define MCU_SIM_MCR 0x00005cff + +#define MCU_SIM_CLKOCR 0x00 +#define MCU_SIM_PLLCR 0x8000 +#define MCU_SIM_CDVCR 0x0000 + +#define MCU_SIM_SYPCR 0x0000 +#define MCU_SIM_SWIV 0x00 +#define MCU_SIM_PICR 0x0000 +#define MCU_SIM_PITR 0x0000 + + +#include <asm/m68360_regs.h> + + +/* + * By the time this RAM specific code begins to execute, DPRAM + * and DRAM should already be mapped and accessible. + */ + + .text +_start: +_stext: + nop + ori.w #MCU_DISABLE_INTRPTS, %sr /* disable interrupts: */ + /* We should not need to setup the boot stack the reset should do it. */ + movea.l #__ramend, %sp /* set up stack at the end of DRAM:*/ + + +set_mbar_register: + moveq.l #0x07, %d1 /* Setup MBAR */ + movec %d1, %dfc + + lea.l MCU_SIM_MBAR_ADRS, %a0 + move.l #_dprbase, %d0 + andi.l #MCU_SIM_MBAR_BA_MASK, %d0 + ori.l #MCU_SIM_MBAR_AS_MASK, %d0 + moves.l %d0, %a0@ + + moveq.l #0x05, %d1 + movec.l %d1, %dfc + + /* Now we can begin to access registers in DPRAM */ + +set_sim_mcr: + /* Set Module Configuration Register */ + move.l #MCU_SIM_MCR, MCR + + /* to do: Determine cause of reset */ + + /* + * configure system clock MC68360 p. 6-40 + * (value +1)*osc/128 = system clock + * or + * (value + 1)*osc = system clock + * You do not need to divide the oscillator by 128 unless you want to. + */ +set_sim_clock: + move.w #MCU_SIM_PLLCR, PLLCR + move.b #MCU_SIM_CLKOCR, CLKOCR + move.w #MCU_SIM_CDVCR, CDVCR + + /* Wait for the PLL to settle */ + move.w #16384, %d0 +pll_settle_wait: + subi.w #1, %d0 + bne pll_settle_wait + + /* Setup the system protection register, and watchdog timer register */ + move.b #MCU_SIM_SWIV, SWIV + move.w #MCU_SIM_PICR, PICR + move.w #MCU_SIM_PITR, PITR + move.w #MCU_SIM_SYPCR, SYPCR + + /* Clear DPRAM - system + parameter */ + movea.l #_dprbase, %a0 + movea.l #_dprbase+0x2000, %a1 + + /* Copy 0 to %a0 until %a0 == %a1 */ +clear_dpram: + movel #0, %a0@+ + cmpal %a0, %a1 + bhi clear_dpram + +configure_memory_controller: + /* Set up Global Memory Register (GMR) */ + move.l #MCU_SIM_GMR, %d0 + move.l %d0, GMR + +configure_chip_select_0: + move.l #0x00400000, %d0 + subq.l #0x01, %d0 + eori.l #SIM_OR_MASK, %d0 + ori.l #SIM_OR0_MASK, %d0 + move.l %d0, OR0 + + move.l #__rom_start, %d0 + ori.l #SIM_BR0_MASK, %d0 + move.l %d0, BR0 + + move.l #0x0, BR1 + move.l #0x0, BR2 + move.l #0x0, BR3 + move.l #0x0, BR4 + move.l #0x0, BR5 + move.l #0x0, BR6 + move.l #0x0, BR7 + + move.w #MCU_SIM_PEPAR, PEPAR + + /* point to vector table: */ + move.l #_romvec, %a0 + move.l #_ramvec, %a1 +copy_vectors: + move.l %a0@, %d0 + move.l %d0, %a1@ + move.l %a0@, %a1@ + addq.l #0x04, %a0 + addq.l #0x04, %a1 + cmp.l #_start, %a0 + blt copy_vectors + + move.l #_ramvec, %a1 + movec %a1, %vbr + + + /* Copy data segment from ROM to RAM */ + moveal #_etext, %a0 + moveal #_sdata, %a1 + moveal #_edata, %a2 + + /* Copy %a0 to %a1 until %a1 == %a2 */ +LD1: + move.l %a0@, %d0 + addq.l #0x04, %a0 + move.l %d0, %a1@ + addq.l #0x04, %a1 + cmp.l #_edata, %a1 + blt LD1 + + moveal #_sbss, %a0 + moveal #_ebss, %a1 + + /* Copy 0 to %a0 until %a0 == %a1 */ +L1: + movel #0, %a0@+ + cmpal %a0, %a1 + bhi L1 + +load_quicc: + move.l #_dprbase, _quicc_base + +store_ram_size: + /* Set ram size information */ + move.l #_sdata, _rambase + move.l #_ebss, _ramstart + move.l #__ramend, %d0 + sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/ + move.l %d0, _ramend /* Different from __ramend.*/ + +store_flash_size: + /* Set rom size information */ + move.l #__rom_end, %d0 + sub.l #__rom_start, %d0 + move.l %d0, rom_length + + pea 0 + pea env + pea %sp@(4) + pea 0 + + lea init_thread_union, %a2 + lea 0x2000(%a2), %sp + +lp: + jsr start_kernel + +_exit: + jmp _exit + + + .data + .align 4 +env: + .long 0 +_quicc_base: + .long 0 +_periph_base: + .long 0 +_ramvec: + .long 0 +_rambase: + .long 0 +_ramstart: + .long 0 +_ramend: + .long 0 +_dprbase: + .long 0xffffe000 + + + .text + + /* + * These are the exception vectors at boot up, they are copied into RAM + * and then overwritten as needed. + */ + +.section ".data.initvect","awx" + .long __ramend /* Reset: Initial Stack Pointer - 0. */ + .long _start /* Reset: Initial Program Counter - 1. */ + .long buserr /* Bus Error - 2. */ + .long trap /* Address Error - 3. */ + .long trap /* Illegal Instruction - 4. */ + .long trap /* Divide by zero - 5. */ + .long trap /* CHK, CHK2 Instructions - 6. */ + .long trap /* TRAPcc, TRAPV Instructions - 7. */ + .long trap /* Privilege Violation - 8. */ + .long trap /* Trace - 9. */ + .long trap /* Line 1010 Emulator - 10. */ + .long trap /* Line 1111 Emualtor - 11. */ + .long trap /* Harware Breakpoint - 12. */ + .long trap /* (Reserved for Coprocessor Protocol Violation)- 13. */ + .long trap /* Format Error - 14. */ + .long trap /* Uninitialized Interrupt - 15. */ + .long trap /* (Unassigned, Reserver) - 16. */ + .long trap /* (Unassigned, Reserver) - 17. */ + .long trap /* (Unassigned, Reserver) - 18. */ + .long trap /* (Unassigned, Reserver) - 19. */ + .long trap /* (Unassigned, Reserver) - 20. */ + .long trap /* (Unassigned, Reserver) - 21. */ + .long trap /* (Unassigned, Reserver) - 22. */ + .long trap /* (Unassigned, Reserver) - 23. */ + .long trap /* Spurious Interrupt - 24. */ + .long trap /* Level 1 Interrupt Autovector - 25. */ + .long trap /* Level 2 Interrupt Autovector - 26. */ + .long trap /* Level 3 Interrupt Autovector - 27. */ + .long trap /* Level 4 Interrupt Autovector - 28. */ + .long trap /* Level 5 Interrupt Autovector - 29. */ + .long trap /* Level 6 Interrupt Autovector - 30. */ + .long trap /* Level 7 Interrupt Autovector - 31. */ + .long system_call /* Trap Instruction Vectors 0 - 32. */ + .long trap /* Trap Instruction Vectors 1 - 33. */ + .long trap /* Trap Instruction Vectors 2 - 34. */ + .long trap /* Trap Instruction Vectors 3 - 35. */ + .long trap /* Trap Instruction Vectors 4 - 36. */ + .long trap /* Trap Instruction Vectors 5 - 37. */ + .long trap /* Trap Instruction Vectors 6 - 38. */ + .long trap /* Trap Instruction Vectors 7 - 39. */ + .long trap /* Trap Instruction Vectors 8 - 40. */ + .long trap /* Trap Instruction Vectors 9 - 41. */ + .long trap /* Trap Instruction Vectors 10 - 42. */ + .long trap /* Trap Instruction Vectors 11 - 43. */ + .long trap /* Trap Instruction Vectors 12 - 44. */ + .long trap /* Trap Instruction Vectors 13 - 45. */ + .long trap /* Trap Instruction Vectors 14 - 46. */ + .long trap /* Trap Instruction Vectors 15 - 47. */ + .long 0 /* (Reserved for Coprocessor) - 48. */ + .long 0 /* (Reserved for Coprocessor) - 49. */ + .long 0 /* (Reserved for Coprocessor) - 50. */ + .long 0 /* (Reserved for Coprocessor) - 51. */ + .long 0 /* (Reserved for Coprocessor) - 52. */ + .long 0 /* (Reserved for Coprocessor) - 53. */ + .long 0 /* (Reserved for Coprocessor) - 54. */ + .long 0 /* (Reserved for Coprocessor) - 55. */ + .long 0 /* (Reserved for Coprocessor) - 56. */ + .long 0 /* (Reserved for Coprocessor) - 57. */ + .long 0 /* (Reserved for Coprocessor) - 58. */ + .long 0 /* (Unassigned, Reserved) - 59. */ + .long 0 /* (Unassigned, Reserved) - 60. */ + .long 0 /* (Unassigned, Reserved) - 61. */ + .long 0 /* (Unassigned, Reserved) - 62. */ + .long 0 /* (Unassigned, Reserved) - 63. */ + /* The assignment of these vectors to the CPM is */ + /* dependent on the configuration of the CPM vba */ + /* fields. */ + .long 0 /* (User-Defined Vectors 1) CPM Error - 64. */ + .long 0 /* (User-Defined Vectors 2) CPM Parallel IO PC11- 65. */ + .long 0 /* (User-Defined Vectors 3) CPM Parallel IO PC10- 66. */ + .long 0 /* (User-Defined Vectors 4) CPM SMC2 / PIP - 67. */ + .long 0 /* (User-Defined Vectors 5) CPM SMC1 - 68. */ + .long 0 /* (User-Defined Vectors 6) CPM SPI - 69. */ + .long 0 /* (User-Defined Vectors 7) CPM Parallel IO PC9 - 70. */ + .long 0 /* (User-Defined Vectors 8) CPM Timer 4 - 71. */ + .long 0 /* (User-Defined Vectors 9) CPM Reserved - 72. */ + .long 0 /* (User-Defined Vectors 10) CPM Parallel IO PC8- 73. */ + .long 0 /* (User-Defined Vectors 11) CPM Parallel IO PC7- 74. */ + .long 0 /* (User-Defined Vectors 12) CPM Parallel IO PC6- 75. */ + .long 0 /* (User-Defined Vectors 13) CPM Timer 3 - 76. */ + .long 0 /* (User-Defined Vectors 14) CPM Reserved - 77. */ + .long 0 /* (User-Defined Vectors 15) CPM Parallel IO PC5- 78. */ + .long 0 /* (User-Defined Vectors 16) CPM Parallel IO PC4- 79. */ + .long 0 /* (User-Defined Vectors 17) CPM Reserved - 80. */ + .long 0 /* (User-Defined Vectors 18) CPM RISC Timer Tbl - 81. */ + .long 0 /* (User-Defined Vectors 19) CPM Timer 2 - 82. */ + .long 0 /* (User-Defined Vectors 21) CPM Reserved - 83. */ + .long 0 /* (User-Defined Vectors 22) CPM IDMA2 - 84. */ + .long 0 /* (User-Defined Vectors 23) CPM IDMA1 - 85. */ + .long 0 /* (User-Defined Vectors 24) CPM SDMA Bus Err - 86. */ + .long 0 /* (User-Defined Vectors 25) CPM Parallel IO PC3- 87. */ + .long 0 /* (User-Defined Vectors 26) CPM Parallel IO PC2- 88. */ + .long 0 /* (User-Defined Vectors 27) CPM Timer 1 - 89. */ + .long 0 /* (User-Defined Vectors 28) CPM Parallel IO PC1- 90. */ + .long 0 /* (User-Defined Vectors 29) CPM SCC 4 - 91. */ + .long 0 /* (User-Defined Vectors 30) CPM SCC 3 - 92. */ + .long 0 /* (User-Defined Vectors 31) CPM SCC 2 - 93. */ + .long 0 /* (User-Defined Vectors 32) CPM SCC 1 - 94. */ + .long 0 /* (User-Defined Vectors 33) CPM Parallel IO PC0- 95. */ + /* I don't think anything uses the vectors after here. */ + .long 0 /* (User-Defined Vectors 34) - 96. */ + .long 0,0,0,0,0 /* (User-Defined Vectors 35 - 39). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 40 - 49). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 50 - 59). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 60 - 69). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 70 - 79). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 80 - 89). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 90 - 99). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 100 - 109). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 110 - 119). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 120 - 129). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 130 - 139). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 140 - 149). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 150 - 159). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 160 - 169). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 170 - 179). */ + .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 180 - 189). */ + .long 0,0,0 /* (User-Defined Vectors 190 - 192). */ +.text +ignore: rte diff --git a/arch/m68knommu/platform/68EZ328/config.c b/arch/m68knommu/platform/68EZ328/config.c index c21971971ff5..d8d56e5de310 100644 --- a/arch/m68knommu/platform/68EZ328/config.c +++ b/arch/m68knommu/platform/68EZ328/config.c @@ -1,5 +1,7 @@ +/***************************************************************************/ + /* - * linux/arch/$(ARCH)/platform/$(PLATFORM)/config.c + * linux/arch/m68knommu/platform/68EZ328/config.c * * Copyright (C) 1993 Hamish Macdonald * Copyright (C) 1999 D. Jeff Dionne @@ -9,6 +11,8 @@ * for more details. */ +/***************************************************************************/ + #include <stdarg.h> #include <linux/config.h> #include <linux/types.h> @@ -20,68 +24,22 @@ #include <asm/setup.h> #include <asm/system.h> #include <asm/pgtable.h> -#include <asm/irq.h> #include <asm/machdep.h> #include <asm/MC68EZ328.h> #ifdef CONFIG_UCSIMM #include <asm/bootstd.h> #endif -#ifdef CONFIG_PILOT -#include "PalmV/romfs.h" -#endif - -void BSP_sched_init(void (*timer_routine)(int, void *, struct pt_regs *)) -{ - /* Restart mode, Enable int, 32KHz, Enable timer */ - TCTL = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN; - /* Set prescaler (Divide 32KHz by 32)*/ - TPRER = 31; - /* Set compare register 32Khz / 32 / 10 = 100 */ - TCMP = 10; - - request_irq(TMR_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL); -} - -void BSP_tick(void) -{ - /* Reset Timer1 */ - TSTAT &= 0; -} - -unsigned long BSP_gettimeoffset (void) -{ - return 0; -} -void BSP_gettod (int *yearp, int *monp, int *dayp, - int *hourp, int *minp, int *secp) -{ -} +/***************************************************************************/ -int BSP_hwclk(int op, struct hwclk_time *t) -{ - if (!op) { - /* read */ - } else { - /* write */ - } - return 0; -} +void m68328_timer_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *)); +void m68328_timer_tick(void); +unsigned long m68328_timer_gettimeoffset(void); +void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec); -int BSP_set_clock_mmss (unsigned long nowtime) -{ -#if 0 - short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60; +/***************************************************************************/ - tod->second1 = real_seconds / 10; - tod->second2 = real_seconds % 10; - tod->minute1 = real_minutes / 10; - tod->minute2 = real_minutes % 10; -#endif - return 0; -} - -void BSP_reset (void) +void m68ez328_reset(void) { local_irq_disable(); asm volatile (" @@ -93,6 +51,8 @@ void BSP_reset (void) "); } +/***************************************************************************/ + unsigned char *cs8900a_hwaddr; static int errno; @@ -119,11 +79,13 @@ void config_BSP(char *command, int len) else command[0] = 0; #endif - mach_sched_init = BSP_sched_init; - mach_tick = BSP_tick; - mach_gettimeoffset = BSP_gettimeoffset; - mach_gettod = BSP_gettod; + mach_sched_init = m68328_timer_init; + mach_tick = m68328_timer_tick; + mach_gettimeoffset = m68328_timer_gettimeoffset; + mach_gettod = m68328_timer_gettod; mach_hwclk = NULL; mach_set_clock_mmss = NULL; - mach_reset = BSP_reset; + mach_reset = m68ez328_reset; } + +/***************************************************************************/ diff --git a/arch/m68knommu/platform/68VZ328/de2/config.c b/arch/m68knommu/platform/68VZ328/config.c index d0586197f113..d926524cdf82 100644 --- a/arch/m68knommu/platform/68VZ328/de2/config.c +++ b/arch/m68knommu/platform/68VZ328/config.c @@ -1,5 +1,7 @@ +/***************************************************************************/ + /* - * linux/arch/m68knommu/platform/MC68VZ328/de2/config.c + * linux/arch/m68knommu/platform/68VZ328/config.c * * Copyright (C) 1993 Hamish Macdonald * Copyright (C) 1999 D. Jeff Dionne @@ -10,6 +12,8 @@ * for more details. */ +/***************************************************************************/ + #include <linux/config.h> #include <linux/types.h> #include <linux/kernel.h> @@ -25,66 +29,25 @@ #include <asm/irq.h> #include <asm/machdep.h> #include <asm/MC68VZ328.h> +#include <asm/bootstd.h> #ifdef CONFIG_INIT_LCD -#include "screen.h" +#include "bootlogo.h" #endif -/* with a 33.16 MHz clock, this will give usec resolution to the time functions */ -#define CLOCK_SOURCE TCTL_CLKSOURCE_SYSCLK -#define CLOCK_PRE 7 -#define TICKS_PER_JIFFY 41450 - -static void -dragen2_sched_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *)) -{ - /* disable timer 1 */ - TCTL = 0; - - /* set ISR */ - if (request_irq(TMR_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL)) - panic("Unable to attach timer interrupt\n"); - - /* Restart mode, Enable int, Set clock source */ - TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE; - TPRER = CLOCK_PRE; - TCMP = TICKS_PER_JIFFY; - - /* Enable timer 1 */ - TCTL |= TCTL_TEN; -} - -static void dragen2_tick(void) -{ - /* Reset Timer1 */ - TSTAT &= 0; -} - -static unsigned long dragen2_gettimeoffset(void) -{ - unsigned long ticks = TCN, offset = 0; - - /* check for pending interrupt */ - if (ticks < (TICKS_PER_JIFFY >> 1) && (ISR & (1 << TMR_IRQ_NUM))) - offset = 1000000 / HZ; - - ticks = (ticks * 1000000 / HZ) / TICKS_PER_JIFFY; +/***************************************************************************/ - return ticks + offset; -} +void m68328_timer_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *)); +void m68328_timer_tick(void); +unsigned long m68328_timer_gettimeoffset(void); +void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec); -static void dragen2_gettod(int *year, int *mon, int *day, int *hour, - int *min, int *sec) -{ - long now = RTCTIME; +/***************************************************************************/ +/* Init Drangon Engine hardware */ +/***************************************************************************/ +#if defined(CONFIG_DRAGEN2) - *year = *mon = *day = 1; - *hour = (now >> 24) % 24; - *min = (now >> 16) % 60; - *sec = now % 60; -} - -static void dragen2_reset(void) +static void m68vz328_reset(void) { local_irq_disable(); @@ -103,7 +66,7 @@ static void dragen2_reset(void) ); } -static void init_hardware(void) +static void init_hardware(char *command, int size) { #ifdef CONFIG_DIRECT_IO_ACCESS SCR = 0x10; /* allow user access to internal registers */ @@ -170,6 +133,60 @@ static void init_hardware(void) #endif } +/***************************************************************************/ +/* Init RT-Control uCdimm hardware */ +/***************************************************************************/ +#elif defined(CONFIG_UCDIMM) + +static void m68vz328_reset(void) +{ + local_irq_disable(); + asm volatile (" + moveal #0x10c00000, %a0; + moveb #0, 0xFFFFF300; + moveal 0(%a0), %sp; + moveal 4(%a0), %a0; + jmp (%a0); + "); +} + +unsigned char *cs8900a_hwaddr; +static int errno; + +_bsc0(char *, getserialnum) +_bsc1(unsigned char *, gethwaddr, int, a) +_bsc1(char *, getbenv, char *, a) + +static void init_hardware(char *command, int size) +{ + char *p; + + printk(KERN_INFO "uCdimm serial string [%s]\n", getserialnum()); + p = cs8900a_hwaddr = gethwaddr(0); + printk(KERN_INFO "uCdimm hwaddr %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", + p[0], p[1], p[2], p[3], p[4], p[5]); + p = getbenv("APPEND"); + if (p) + strcpy(p, command); + else + command[0] = 0; +} + +/***************************************************************************/ +#else + +static void m68vz328_reset(void) +{ +} + +static void init_hardware(char *command, int size) +{ +} + +/***************************************************************************/ +#endif +/***************************************************************************/ + void config_BSP(char *command, int size) { printk(KERN_INFO "68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n"); @@ -181,11 +198,13 @@ void config_BSP(char *command, int size) memset(command, 0, size); #endif - init_hardware(); + init_hardware(command, size); - mach_sched_init = (void *)dragen2_sched_init; - mach_tick = dragen2_tick; - mach_gettimeoffset = dragen2_gettimeoffset; - mach_reset = dragen2_reset; - mach_gettod = dragen2_gettod; + mach_sched_init = (void *) m68328_timer_init; + mach_tick = m68328_timer_tick; + mach_gettimeoffset = m68328_timer_gettimeoffset; + mach_gettod = m68328_timer_gettod; + mach_reset = m68vz328_reset; } + +/***************************************************************************/ diff --git a/arch/m68knommu/platform/68VZ328/ucdimm/config.c b/arch/m68knommu/platform/68VZ328/ucdimm/config.c deleted file mode 100644 index 2deadaffd81e..000000000000 --- a/arch/m68knommu/platform/68VZ328/ucdimm/config.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * linux/arch/m68knommu/platform/68VZ328/ucdimm/config.c - * - * Copyright (C) 1993 Hamish Macdonald - * Copyright (C) 1999 D. Jeff Dionne - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#include <stdarg.h> -#include <linux/config.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/tty.h> -#include <linux/console.h> - -#include <asm/setup.h> -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/irq.h> -#include <asm/machdep.h> -#include <asm/MC68VZ328.h> -#include <asm/bootstd.h> - -void BSP_sched_init(void (*timer_routine)(int, void *, struct pt_regs *)) -{ - /* Restart mode, Enable int, 32KHz, Enable timer */ - TCTL = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN; - /* Set prescaler (Divide 32KHz by 32)*/ - TPRER = 31; - /* Set compare register 32Khz / 32 / 10 = 100 */ - TCMP = 10; - - request_irq(TMR_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL); -} - -void BSP_tick(void) -{ - /* Reset Timer1 */ - TSTAT &= 0; -} - -unsigned long BSP_gettimeoffset (void) -{ - return 0; -} - -void BSP_gettod (int *yearp, int *monp, int *dayp, - int *hourp, int *minp, int *secp) -{ -} - -int BSP_hwclk(int op, struct hwclk_time *t) -{ - if (!op) { - /* read */ - } else { - /* write */ - } - return 0; -} - -int BSP_set_clock_mmss (unsigned long nowtime) -{ -#if 0 - short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60; - - tod->second1 = real_seconds / 10; - tod->second2 = real_seconds % 10; - tod->minute1 = real_minutes / 10; - tod->minute2 = real_minutes % 10; -#endif - return 0; -} - -void BSP_reset (void) -{ - local_irq_disable(); - asm volatile (" - moveal #0x10c00000, %a0; - moveb #0, 0xFFFFF300; - moveal 0(%a0), %sp; - moveal 4(%a0), %a0; - jmp (%a0); - "); -} - -unsigned char *cs8900a_hwaddr; -static int errno; - -_bsc0(char *, getserialnum) -_bsc1(unsigned char *, gethwaddr, int, a) -_bsc1(char *, getbenv, char *, a) - -void config_BSP(char *command, int len) -{ - unsigned char *p; - - printk(KERN_INFO "\n68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n"); - - printk(KERN_INFO "uCdimm serial string [%s]\n",getserialnum()); - p = cs8900a_hwaddr = gethwaddr(0); - printk(KERN_INFO "uCdimm hwaddr %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", - p[0], p[1], p[2], p[3], p[4], p[5]); - p = getbenv("APPEND"); - if (p) strcpy(p,command); - else command[0] = 0; - - mach_sched_init = BSP_sched_init; - mach_tick = BSP_tick; - mach_gettimeoffset = BSP_gettimeoffset; - mach_gettod = BSP_gettod; - mach_reset = BSP_reset; -} diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 898de2df1fc7..0eb71ac303af 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -4,27 +4,52 @@ config MIPS # Horrible source of confusion. Die, die, die ... select EMBEDDED -config MIPS64 - bool "64-bit kernel" - help - Select this option if you want to build a 64-bit kernel. You should - only select this option if you have hardware that actually has a - 64-bit processor and if your application will actually benefit from - 64-bit processing, otherwise say N. You must say Y for kernels for - SGI IP27 (Origin 200 and 2000) and SGI IP32 (O2). If in doubt say N. - -config 64BIT - def_bool MIPS64 - -config MIPS32 +# shouldn't it be per-subarchitecture? +config ARCH_MAY_HAVE_PC_FDC bool - depends on MIPS64 = 'n' default y mainmenu "Linux/MIPS Kernel Configuration" source "init/Kconfig" +config SYS_SUPPORTS_32BIT_KERNEL + bool +config SYS_SUPPORTS_64BIT_KERNEL + bool +config CPU_SUPPORTS_32BIT_KERNEL + bool +config CPU_SUPPORTS_64BIT_KERNEL + bool + +menu "Kernel type" + +choice + + prompt "Kernel code model" + help + You should only select this option if you have a workload that + actually benefits from 64-bit processing or if your machine has + large memory. You will only be presented a single option in this + menu if your system does not support both 32-bit and 64-bit kernels. + +config 32BIT + bool "32-bit kernel" + depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL + select TRAD_SIGNALS + help + Select this option if you want to build a 32-bit kernel. + +config 64BIT + bool "64-bit kernel" + depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL + help + Select this option if you want to build a 64-bit kernel. + +endchoice + +endmenu + menu "Machine selection" config MACH_JAZZ @@ -34,6 +59,8 @@ config MACH_JAZZ select GENERIC_ISA_DMA select I8259 select ISA + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL help This a family of machines based on the MIPS R4030 chipset which was used by several vendors to build RISC/os and Windows NT workstations. @@ -71,7 +98,9 @@ config OLIVETTI_M700 <http://www.linux-mips.org/>. config MACH_VR41XX - bool "Support for NEC VR41XX-based machines" + bool "Support for NEC VR4100 series based machines" + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL config NEC_CMBVR4133 bool "Support for NEC CMB-VR4133" @@ -80,7 +109,6 @@ config NEC_CMBVR4133 select DMA_NONCOHERENT select IRQ_CPU select HW_HAS_PCI - select PCI_VR41XX config ROCKHOPPER bool "Support for Rockhopper baseboard" @@ -91,6 +119,7 @@ config ROCKHOPPER config CASIO_E55 bool "Support for CASIO CASSIOPEIA E-10/15/55/65" depends on MACH_VR41XX + select CPU_LITTLE_ENDIAN select DMA_NONCOHERENT select IRQ_CPU select ISA @@ -98,53 +127,61 @@ config CASIO_E55 config IBM_WORKPAD bool "Support for IBM WorkPad z50" depends on MACH_VR41XX + select CPU_LITTLE_ENDIAN select DMA_NONCOHERENT select IRQ_CPU select ISA -config TANBAC_TB0226 - bool "Support for TANBAC TB0226 (Mbase)" +config TANBAC_TB022X + bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM" depends on MACH_VR41XX + select CPU_LITTLE_ENDIAN select DMA_NONCOHERENT - select HW_HAS_PCI select IRQ_CPU + select HW_HAS_PCI help - The TANBAC TB0226 (Mbase) is a MIPS-based platform manufactured by TANBAC. + The TANBAC VR4131 multichip module(TB0225) and + the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms + manufactured by TANBAC. + Please refer to <http://www.tanbac.co.jp/> + about VR4131 multichip module and VR4131DIMM. + +config TANBAC_TB0226 + bool "Support for TANBAC Mbase(TB0226)" + depends on TANBAC_TB022X + select GPIO_VR41XX + help + The TANBAC Mbase(TB0226) is a MIPS-based platform manufactured by TANBAC. Please refer to <http://www.tanbac.co.jp/> about Mbase. -config TANBAC_TB0229 - bool "Support for TANBAC TB0229 (VR4131DIMM)" - depends on MACH_VR41XX - select DMA_NONCOHERENT - select HW_HAS_PCI - select IRQ_CPU +config TANBAC_TB0287 + bool "Support for TANBAC Mini-ITX DIMM base(TB0287)" + depends on TANBAC_TB022X help - The TANBAC TB0229 (VR4131DIMM) is a MIPS-based platform manufactured by TANBAC. - Please refer to <http://www.tanbac.co.jp/> about VR4131DIMM. + The TANBAC Mini-ITX DIMM base(TB0287) is a MIPS-based platform manufactured by TANBAC. + Please refer to <http://www.tanbac.co.jp/> about Mini-ITX DIMM base. config VICTOR_MPC30X bool "Support for Victor MP-C303/304" + depends on MACH_VR41XX + select CPU_LITTLE_ENDIAN select DMA_NONCOHERENT - select HW_HAS_PCI select IRQ_CPU - depends on MACH_VR41XX + select HW_HAS_PCI config ZAO_CAPCELLA bool "Support for ZAO Networks Capcella" depends on MACH_VR41XX + select CPU_LITTLE_ENDIAN select DMA_NONCOHERENT - select HW_HAS_PCI select IRQ_CPU + select HW_HAS_PCI config PCI_VR41XX bool "Add PCI control unit support of NEC VR4100 series" - depends on MACH_VR41XX && PCI - -config VRC4171 - tristate "Add NEC VRC4171 companion chip support" - depends on MACH_VR41XX && ISA - ---help--- - The NEC VRC4171/4171A is a companion chip for NEC VR4111/VR4121. + depends on MACH_VR41XX && HW_HAS_PCI + default y + select PCI config VRC4173 tristate "Add NEC VRC4173 companion chip support" @@ -154,25 +191,28 @@ config VRC4173 config TOSHIBA_JMR3927 bool "Support for Toshiba JMR-TX3927 board" - depends on MIPS32 select DMA_NONCOHERENT select HW_HAS_PCI select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL config MIPS_COBALT - bool "Support for Cobalt Server (EXPERIMENTAL)" + bool "Support for Cobalt Server" depends on EXPERIMENTAL select DMA_NONCOHERENT select HW_HAS_PCI select I8259 select IRQ_CPU + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL config MACH_DECSTATION bool "Support for DECstations" select BOOT_ELF32 select DMA_NONCOHERENT select IRQ_CPU - depends on MIPS32 || EXPERIMENTAL + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL ---help--- This enables support for DEC's MIPS based workstations. For details see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the @@ -194,6 +234,8 @@ config MIPS_EV64120 select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_GT64120 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL help This is an evaluation board based on the Galileo GT-64120 single-chip system controller that contains a MIPS R5000 compatible @@ -214,6 +256,8 @@ config MIPS_EV96100 select MIPS_GT96100 select RM7000_CPU_SCACHE select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL help This is an evaluation board based on the Galileo GT-96100 LAN/WAN communications controllers containing a MIPS R5000 compatible core @@ -224,6 +268,8 @@ config MIPS_IVR bool "Support for Globespan IVR board" select DMA_NONCOHERENT select HW_HAS_PCI + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL help This is an evaluation board built by Globespan to showcase thir iVR (Internet Video Recorder) design. It utilizes a QED RM5231 @@ -237,6 +283,8 @@ config LASAT select HW_HAS_PCI select MIPS_GT64120 select R5000_CPU_SCACHE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL config PICVUE tristate "PICVUE LCD display driver" @@ -258,6 +306,8 @@ config MIPS_ITE8172 bool "Support for ITE 8172G board" select DMA_NONCOHERENT select HW_HAS_PCI + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL help Ths is an evaluation board made by ITE <http://www.ite.com.tw/> with ATX form factor that utilizes a MIPS R5000 to work with its @@ -281,6 +331,8 @@ config MIPS_ATLAS select HW_HAS_PCI select MIPS_GT64120 select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL help This enables support for the QED R5231-based MIPS Atlas evaluation board. @@ -295,6 +347,8 @@ config MIPS_MALTA select I8259 select MIPS_GT64120 select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL help This enables support for the VR5000-based MIPS Malta evaluation board. @@ -304,6 +358,8 @@ config MIPS_SEAD depends on EXPERIMENTAL select IRQ_CPU select DMA_NONCOHERENT + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL config MOMENCO_OCELOT bool "Support for Momentum Ocelot board" @@ -314,6 +370,8 @@ config MOMENCO_OCELOT select MIPS_GT64120 select RM7000_CPU_SCACHE select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL help The Ocelot is a MIPS-based Single Board Computer (SBC) made by Momentum Computer <http://www.momenco.com/>. @@ -327,6 +385,8 @@ config MOMENCO_OCELOT_G select PCI_MARVELL select RM7000_CPU_SCACHE select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL help The Ocelot is a MIPS-based Single Board Computer (SBC) made by Momentum Computer <http://www.momenco.com/>. @@ -340,6 +400,8 @@ config MOMENCO_OCELOT_C select PCI_MARVELL select RM7000_CPU_SCACHE select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL help The Ocelot is a MIPS-based Single Board Computer (SBC) made by Momentum Computer <http://www.momenco.com/>. @@ -355,6 +417,8 @@ config MOMENCO_OCELOT_3 select PCI_MARVELL select RM7000_CPU_SCACHE select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL help The Ocelot-3 is based off Discovery III System Controller and PMC-Sierra Rm79000 core. @@ -371,6 +435,8 @@ config MOMENCO_JAGUAR_ATX select PCI_MARVELL select RM7000_CPU_SCACHE select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL help The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by Momentum Computer <http://www.momenco.com/>. @@ -390,6 +456,8 @@ config PMC_YOSEMITE select IRQ_CPU_RM7K select IRQ_CPU_RM9K select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL help Yosemite is an evaluation board for the RM9000x2 processor manufactured by PMC-Sierra @@ -407,6 +475,8 @@ config DDB5074 select IRQ_CPU select I8259 select ISA + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL help This enables support for the VR5000-based NEC DDB Vrc-5074 evaluation board. @@ -419,6 +489,8 @@ config DDB5476 select IRQ_CPU select I8259 select ISA + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL help This enables support for the R5432-based NEC DDB Vrc-5476 evaluation board. @@ -433,6 +505,8 @@ config DDB5477 select HW_HAS_PCI select I8259 select IRQ_CPU + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL help This enables support for the R5432-based NEC DDB Vrc-5477, or Rockhopper/SolutionGear boards with R5432/R5500 CPUs. @@ -445,10 +519,23 @@ config DDB5477_BUS_FREQUENCY depends on DDB5477 default 0 -config NEC_OSPREY - bool "Support for NEC Osprey board" - select DMA_NONCOHERENT - select IRQ_CPU +config QEMU + bool "Support for Qemu" + select DMA_COHERENT + select GENERIC_ISA_DMA + select HAVE_STD_PC_SERIAL_PORT + select I8259 + select ISA + select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + help + Qemu is a software emulator which among other architectures also + can simulate a MIPS32 4Kc system. This patch adds support for the + system architecture that currently is being simulated by Qemu. It + will eventually be removed again when Qemu has the capability to + simulate actual MIPS hardware platforms. More information on Qemu + can be found at http://www.linux-mips.org/wiki/Qemu. config SGI_IP22 bool "Support for SGI IP22 (Indy/Indigo2)" @@ -459,6 +546,8 @@ config SGI_IP22 select IP22_CPU_SCACHE select IRQ_CPU select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL help This are the SGI Indy, Challenge S and Indigo2, as well as certain OEM variants like the Tandem CMN B006S. To compile a Linux kernel @@ -466,12 +555,12 @@ config SGI_IP22 config SGI_IP27 bool "Support for SGI IP27 (Origin200/2000)" - depends on MIPS64 select ARC select ARC64 select DMA_IP27 select HW_HAS_PCI select PCI_DOMAINS + select SYS_SUPPORTS_64BIT_KERNEL help This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics workstations. To compile a Linux kernel that runs on these, say Y @@ -534,7 +623,7 @@ config REPLICATE_EXHANDLERS config SGI_IP32 bool "Support for SGI IP32 (O2) (EXPERIMENTAL)" - depends on MIPS64 && EXPERIMENTAL + depends on EXPERIMENTAL select ARC select ARC32 select BOOT_ELF32 @@ -544,12 +633,13 @@ config SGI_IP32 select HW_HAS_PCI select R5000_CPU_SCACHE select RM7000_CPU_SCACHE + select SYS_SUPPORTS_64BIT_KERNEL help If you want this kernel to run on SGI O2 workstation, say Y here. config SOC_AU1X00 - depends on MIPS32 bool "Support for AMD/Alchemy Au1X00 SOCs" + select SYS_SUPPORTS_32BIT_KERNEL choice prompt "Au1X00 SOC Type" @@ -661,6 +751,8 @@ config SIBYTE_SB1xxx_SOC select BOOT_ELF32 select DMA_COHERENT select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL choice prompt "BCM1xxx SOC-based board" @@ -880,6 +972,8 @@ config SNI_RM200_PCI select HW_HAS_PCI select I8259 select ISA + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL help The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid @@ -888,13 +982,14 @@ config SNI_RM200_PCI config TOSHIBA_RBTX4927 bool "Support for Toshiba TBTX49[23]7 board" - depends on MIPS32 select DMA_NONCOHERENT select HAS_TXX9_SERIAL select HW_HAS_PCI select I8259 select ISA select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL help This Toshiba board is based on the TX4927 processor. Say Y here to support this machine type @@ -926,13 +1021,21 @@ config ARC depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 default y -config DMA_COHERENT +config DMA_COHERENT + bool + +config DMA_IP27 bool -config DMA_IP27 +config DMA_IP32 bool + select DMA_NEED_PCI_MAP_STATE -config DMA_NONCOHERENT +config DMA_NONCOHERENT + bool + select DMA_NEED_PCI_MAP_STATE + +config DMA_NEED_PCI_MAP_STATE bool config EARLY_PRINTK @@ -974,7 +1077,7 @@ config MIPS_DISABLE_OBSOLETE_IDE config CPU_LITTLE_ENDIAN bool "Generate little endian code" - default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA + default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927 help Some MIPS machines can be configured for either little or big endian @@ -1091,11 +1194,6 @@ config ARC32 config HAVE_STD_PC_SERIAL_PORT bool -config VR4181 - bool - depends on NEC_OSPREY - default y - config ARC_CONSOLE bool "ARC console support" depends on SGI_IP22 || SNI_RM200_PCI @@ -1145,13 +1243,16 @@ choice config CPU_MIPS32 bool "MIPS32" + select CPU_SUPPORTS_32BIT_KERNEL config CPU_MIPS64 bool "MIPS64" + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL config CPU_R3000 bool "R3000" - depends on MIPS32 + select CPU_SUPPORTS_32BIT_KERNEL help Please make sure to pick the right CPU type. Linux/MIPS is not designed to be generic, i.e. Kernels compiled for R3000 CPUs will @@ -1162,10 +1263,12 @@ config CPU_R3000 config CPU_TX39XX bool "R39XX" - depends on MIPS32 + select CPU_SUPPORTS_32BIT_KERNEL config CPU_VR41XX bool "R41xx" + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL help The options selects support for the NEC VR41xx series of processors. Only choose this option if you have one of these processors as a @@ -1174,20 +1277,28 @@ config CPU_VR41XX config CPU_R4300 bool "R4300" + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL help MIPS Technologies R4300-series processors. config CPU_R4X00 bool "R4x00" + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL help MIPS Technologies R4000-series processors other than 4300, including the R4000, R4400, R4600, and 4700. config CPU_TX49XX bool "R49XX" + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL config CPU_R5000 bool "R5000" + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL help MIPS Technologies R5000-series processors other than the Nevada. @@ -1196,36 +1307,48 @@ config CPU_R5432 config CPU_R6000 bool "R6000" - depends on MIPS32 && EXPERIMENTAL + depends on EXPERIMENTAL + select CPU_SUPPORTS_32BIT_KERNEL help MIPS Technologies R6000 and R6000A series processors. Note these processors are extremly rare and the support for them is incomplete. config CPU_NEVADA bool "RM52xx" + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL help QED / PMC-Sierra RM52xx-series ("Nevada") processors. config CPU_R8000 bool "R8000" - depends on MIPS64 && EXPERIMENTAL + depends on EXPERIMENTAL + select CPU_SUPPORTS_64BIT_KERNEL help MIPS Technologies R8000 processors. Note these processors are uncommon and the support for them is incomplete. config CPU_R10000 bool "R10000" + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL help MIPS Technologies R10000-series processors. config CPU_RM7000 bool "RM7000" + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL config CPU_RM9000 bool "RM9000" + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL config CPU_SB1 bool "SB1" + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL endchoice @@ -1321,11 +1444,11 @@ config SB1_PASS_2_1_WORKAROUNDS config 64BIT_PHYS_ADDR bool "Support for 64-bit physical address space" - depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && MIPS32 + depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && 32BIT config CPU_ADVANCED bool "Override CPU Options" - depends on MIPS32 + depends on 32BIT help Saying yes here allows you to select support for various features your CPU may or may not have. Most people should say N here. @@ -1379,7 +1502,7 @@ config CPU_HAS_SYNC # config HIGHMEM bool "High Memory Support" - depends on MIPS32 && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX) + depends on 32BIT && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX) config ARCH_FLATMEM_ENABLE def_bool y @@ -1439,7 +1562,7 @@ config RTC_DS1742 config MIPS_INSANE_LARGE bool "Support for large 64-bit configurations" - depends on CPU_R10000 && MIPS64 + depends on CPU_R10000 && 64BIT help MIPS R10000 does support a 44 bit / 16TB address space as opposed to previous 64-bit processors which only supported 40 bit / 1TB. If you @@ -1540,11 +1663,11 @@ source "fs/Kconfig.binfmt" config TRAD_SIGNALS bool - default y if MIPS32 + default y if 32BIT config BUILD_ELF64 bool "Use 64-bit ELF format for building" - depends on MIPS64 + depends on 64BIT help A 64-bit kernel is usually built using the 64-bit ELF binary object format as it's one that allows arbitrary 64-bit constructs. For @@ -1559,11 +1682,11 @@ config BUILD_ELF64 config BINFMT_IRIX bool "Include IRIX binary compatibility" - depends on !CPU_LITTLE_ENDIAN && MIPS32 && BROKEN + depends on !CPU_LITTLE_ENDIAN && 32BIT && BROKEN config MIPS32_COMPAT bool "Kernel support for Linux/MIPS 32-bit binary compatibility" - depends on MIPS64 + depends on 64BIT help Select this option if you want Linux/MIPS 32-bit binary compatibility. Since all software available for Linux/MIPS is diff --git a/arch/mips/Makefile b/arch/mips/Makefile index bc1c44274a58..346e803f153b 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -37,12 +37,12 @@ else 64bit-emul = elf64btsmip endif -ifdef CONFIG_MIPS32 +ifdef CONFIG_32BIT gcc-abi = 32 tool-prefix = $(32bit-tool-prefix) UTS_MACHINE := mips endif -ifdef CONFIG_MIPS64 +ifdef CONFIG_64BIT gcc-abi = 64 tool-prefix = $(64bit-tool-prefix) UTS_MACHINE := mips64 @@ -63,7 +63,7 @@ ld-emul = $(32bit-emul) vmlinux-32 = vmlinux vmlinux-64 = vmlinux.64 -cflags-$(CONFIG_MIPS64) += $(call cc-option,-mno-explicit-relocs) +cflags-$(CONFIG_64BIT) += $(call cc-option,-mno-explicit-relocs) endif # @@ -177,7 +177,7 @@ cflags-$(CONFIG_CPU_MIPS64) += \ cflags-$(CONFIG_CPU_R5000) += \ $(call set_gccflags,r5000,mips4,r5000,mips4,mips2) \ - -Wa,--trap + -Wa,--trap cflags-$(CONFIG_CPU_R5432) += \ $(call set_gccflags,r5400,mips4,r5000,mips4,mips2) \ @@ -423,6 +423,12 @@ core-$(CONFIG_PMC_YOSEMITE) += arch/mips/pmc-sierra/yosemite/ cflags-$(CONFIG_PMC_YOSEMITE) += -Iinclude/asm-mips/mach-yosemite load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000 +# Qemu simulating MIPS32 4Kc +# +core-$(CONFIG_QEMU) += arch/mips/qemu/ +cflags-$(CONFIG_QEMU) += -Iinclude/asm-mips/mach-qemu +load-$(CONFIG_QEMU) += 0xffffffff80010000 + # # Momentum Ocelot-3 # @@ -469,13 +475,6 @@ cflags-$(CONFIG_LASAT) += -Iinclude/asm-mips/mach-lasat load-$(CONFIG_LASAT) += 0xffffffff80000000 # -# NEC Osprey (vr4181) board -# -core-$(CONFIG_NEC_OSPREY) += arch/mips/vr4181/common/ \ - arch/mips/vr4181/osprey/ -load-$(CONFIG_NEC_OSPREY) += 0xffffffff80002000 - -# # Common VR41xx # core-$(CONFIG_MACH_VR41XX) += arch/mips/vr41xx/common/ @@ -490,13 +489,11 @@ load-$(CONFIG_NEC_CMBVR4133) += 0xffffffff80100000 # # ZAO Networks Capcella (VR4131) # -core-$(CONFIG_ZAO_CAPCELLA) += arch/mips/vr41xx/zao-capcella/ load-$(CONFIG_ZAO_CAPCELLA) += 0xffffffff80000000 # # Victor MP-C303/304 (VR4122) # -core-$(CONFIG_VICTOR_MPC30X) += arch/mips/vr41xx/victor-mpc30x/ load-$(CONFIG_VICTOR_MPC30X) += 0xffffffff80001000 # @@ -512,16 +509,9 @@ core-$(CONFIG_CASIO_E55) += arch/mips/vr41xx/casio-e55/ load-$(CONFIG_CASIO_E55) += 0xffffffff80004000 # -# TANBAC TB0226 Mbase (VR4131) +# TANBAC VR4131 multichip module(TB0225) and TANBAC VR4131DIMM(TB0229) (VR4131) # -core-$(CONFIG_TANBAC_TB0226) += arch/mips/vr41xx/tanbac-tb0226/ -load-$(CONFIG_TANBAC_TB0226) += 0xffffffff80000000 - -# -# TANBAC TB0229 VR4131DIMM (VR4131) -# -core-$(CONFIG_TANBAC_TB0229) += arch/mips/vr41xx/tanbac-tb0229/ -load-$(CONFIG_TANBAC_TB0229) += 0xffffffff80000000 +load-$(CONFIG_TANBAC_TB022X) += 0xffffffff80000000 # # SGI IP22 (Indy/Indigo2) @@ -534,10 +524,10 @@ load-$(CONFIG_TANBAC_TB0229) += 0xffffffff80000000 # core-$(CONFIG_SGI_IP22) += arch/mips/sgi-ip22/ cflags-$(CONFIG_SGI_IP22) += -Iinclude/asm-mips/mach-ip22 -ifdef CONFIG_MIPS32 +ifdef CONFIG_32BIT load-$(CONFIG_SGI_IP22) += 0xffffffff88002000 endif -ifdef CONFIG_MIPS64 +ifdef CONFIG_64BIT load-$(CONFIG_SGI_IP22) += 0xffffffff88004000 endif @@ -642,7 +632,7 @@ load-$(CONFIG_TOSHIBA_RBTX4927) += 0xffffffff80020000 cflags-y += -Iinclude/asm-mips/mach-generic drivers-$(CONFIG_PCI) += arch/mips/pci/ -ifdef CONFIG_MIPS32 +ifdef CONFIG_32BIT ifdef CONFIG_CPU_LITTLE_ENDIAN JIFFIES = jiffies_64 else @@ -674,8 +664,8 @@ CPPFLAGS_vmlinux.lds := \ head-y := arch/mips/kernel/head.o arch/mips/kernel/init_task.o libs-y += arch/mips/lib/ -libs-$(CONFIG_MIPS32) += arch/mips/lib-32/ -libs-$(CONFIG_MIPS64) += arch/mips/lib-64/ +libs-$(CONFIG_32BIT) += arch/mips/lib-32/ +libs-$(CONFIG_64BIT) += arch/mips/lib-64/ core-y += arch/mips/kernel/ arch/mips/mm/ arch/mips/math-emu/ @@ -683,7 +673,7 @@ drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/ ifdef CONFIG_LASAT rom.bin rom.sw: vmlinux - $(call descend,arch/mips/lasat/image,$@) + $(Q)$(MAKE) $(build)=arch/mips/lasat/image $@ endif # @@ -730,38 +720,7 @@ archclean: @$(MAKE) $(clean)=arch/mips/boot @$(MAKE) $(clean)=arch/mips/lasat -# Generate <asm/offset.h -# -# The default rule is suffering from funny problems on MIPS so we using our -# own ... -# -# --------------------------------------------------------------------------- - -define filechk_gen-asm-offset.h - (set -e; \ - echo "#ifndef _ASM_OFFSET_H"; \ - echo "#define _ASM_OFFSET_H"; \ - echo "/*"; \ - echo " * DO NOT MODIFY."; \ - echo " *"; \ - echo " * This file was generated by arch/$(ARCH)/Makefile"; \ - echo " *"; \ - echo " */"; \ - echo ""; \ - sed -ne "/^@@@/s///p"; \ - echo "#endif /* _ASM_OFFSET_H */" ) -endef - -prepare: include/asm-$(ARCH)/offset.h - -arch/$(ARCH)/kernel/offset.s: include/asm include/linux/version.h \ - include/config/MARKER - -include/asm-$(ARCH)/offset.h: arch/$(ARCH)/kernel/offset.s - $(call filechk,gen-asm-offset.h) -CLEAN_FILES += include/asm-$(ARCH)/offset.h.tmp \ - include/asm-$(ARCH)/offset.h \ - vmlinux.32 \ +CLEAN_FILES += vmlinux.32 \ vmlinux.64 \ vmlinux.ecoff diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/au1000/common/pci.c index 533721eef6ae..4e5a6e1a9a6e 100644 --- a/arch/mips/au1000/common/pci.c +++ b/arch/mips/au1000/common/pci.c @@ -40,14 +40,14 @@ /* TBD */ static struct resource pci_io_resource = { - "pci IO space", + "pci IO space", (u32)PCI_IO_START, (u32)PCI_IO_END, IORESOURCE_IO }; static struct resource pci_mem_resource = { - "pci memory space", + "pci memory space", (u32)PCI_MEM_START, (u32)PCI_MEM_END, IORESOURCE_MEM @@ -68,7 +68,7 @@ static unsigned long virt_io_addr; static int __init au1x_pci_setup(void) { #if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) - virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START, + virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START, Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1); if (!virt_io_addr) { @@ -77,7 +77,7 @@ static int __init au1x_pci_setup(void) } #ifdef CONFIG_DMA_NONCOHERENT - /* + /* * Set the NC bit in controller for Au1500 pre-AC silicon */ u32 prid = read_c0_prid(); diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index dbc8b1bda963..eff89e109ce6 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -97,7 +97,7 @@ static int __init au1x00_setup(void) argptr = prom_getcmdline(); strcat(argptr, " console=ttyS0,115200"); } -#endif +#endif #ifdef CONFIG_FB_AU1100 if ((argptr = strstr(argptr, "video=")) == NULL) { diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c index fe418f1620c3..57675b41480e 100644 --- a/arch/mips/au1000/common/time.c +++ b/arch/mips/au1000/common/time.c @@ -281,7 +281,7 @@ unsigned long cal_r4koff(void) cpu_speed = count * 2; } #else - cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * + cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK; count = cpu_speed / 2; #endif @@ -356,7 +356,7 @@ static unsigned long do_fast_cp0_gettimeoffset(void) : "hi", "lo", GCC_REG_ACCUM); /* - * Due to possible jiffies inconsistencies, we need to check + * Due to possible jiffies inconsistencies, we need to check * the result so that we'll get a timer that is monotonic. */ if (res >= USECS_PER_JIFFY) @@ -375,8 +375,8 @@ static unsigned long do_fast_pm_gettimeoffset(void) au_sync(); offset = pc0 - last_pc0; if (offset > 2*MATCH20_INC) { - printk("huge offset %x, last_pc0 %x last_match20 %x pc0 %x\n", - (unsigned)offset, (unsigned)last_pc0, + printk("huge offset %x, last_pc0 %x last_match20 %x pc0 %x\n", + (unsigned)offset, (unsigned)last_pc0, (unsigned)last_match20, (unsigned)pc0); } offset = (unsigned long)((offset * 305) / 10); @@ -394,11 +394,11 @@ void au1xxx_timer_setup(struct irqaction *irq) r4k_offset = cal_r4koff(); printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset); - //est_freq = 2*r4k_offset*HZ; - est_freq = r4k_offset*HZ; + //est_freq = 2*r4k_offset*HZ; + est_freq = r4k_offset*HZ; est_freq += 5000; /* round */ est_freq -= est_freq%10000; - printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, + printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, (est_freq%1000000)*100/1000000); set_au1x00_speed(est_freq); set_au1x00_lcd_clock(); // program the LCD clock diff --git a/arch/mips/au1000/csb250/board_setup.c b/arch/mips/au1000/csb250/board_setup.c index 90426eaffb23..1c55c5f59d75 100644 --- a/arch/mips/au1000/csb250/board_setup.c +++ b/arch/mips/au1000/csb250/board_setup.c @@ -182,7 +182,7 @@ void __init board_setup(void) au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV); au_writel(0, Au1500_PCI_MWBASE_REV_CCL); au_writel(0x02a00356, Au1500_PCI_STATCMD); - au_writel(0x00003c04, Au1500_PCI_HDRTYPE); + au_writel(0x00003c04, Au1500_PCI_HDRTYPE); au_writel(0x00000008, Au1500_PCI_MBAR); au_sync(); @@ -216,7 +216,7 @@ csb250_pci_idsel(unsigned int devsel, int assert) unsigned int gpio2_pins; retval = 1; - + /* First, disable both selects, then assert the one requested. */ au_writel(0xc000c000, GPIO2_OUTPUT); diff --git a/arch/mips/au1000/csb250/init.c b/arch/mips/au1000/csb250/init.c index 4320057fc439..bd99733abc0b 100644 --- a/arch/mips/au1000/csb250/init.c +++ b/arch/mips/au1000/csb250/init.c @@ -81,7 +81,7 @@ int __init prom_init(int argc, char **argv, char **envp, int *prom_vec) csb_env[0] = env1; mips_machgroup = MACH_GROUP_ALCHEMY; - mips_machtype = MACH_CSB250; + mips_machtype = MACH_CSB250; prom_init_cmdline(); memsize_str = prom_getenv("memsize"); diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c index 51eee94a5e82..4b9d5e46edbb 100644 --- a/arch/mips/au1000/db1x00/init.c +++ b/arch/mips/au1000/db1x00/init.c @@ -61,7 +61,7 @@ void __init prom_init(void) prom_envp = (char **) fw_arg2; mips_machgroup = MACH_GROUP_ALCHEMY; - mips_machtype = MACH_DB1000; /* set the platform # */ + mips_machtype = MACH_DB1000; /* set the platform # */ prom_init_cmdline(); diff --git a/arch/mips/au1000/hydrogen3/init.c b/arch/mips/au1000/hydrogen3/init.c index eee4adf98711..8cc9879dd582 100644 --- a/arch/mips/au1000/hydrogen3/init.c +++ b/arch/mips/au1000/hydrogen3/init.c @@ -63,7 +63,7 @@ int __init prom_init(int argc, char **argv, char **envp, int *prom_vec) prom_envp = envp; mips_machgroup = MACH_GROUP_ALCHEMY; - mips_machtype = MACH_DB1000; /* set the platform # */ + mips_machtype = MACH_DB1000; /* set the platform # */ prom_init_cmdline(); memsize_str = prom_getenv("memsize"); diff --git a/arch/mips/au1000/pb1000/board_setup.c b/arch/mips/au1000/pb1000/board_setup.c index 2fa211b69329..0b4807dc9f44 100644 --- a/arch/mips/au1000/pb1000/board_setup.c +++ b/arch/mips/au1000/pb1000/board_setup.c @@ -174,7 +174,7 @@ void __init board_setup(void) case 0x02: /* HB */ break; default: /* HC and newer */ - /* Enable sys bus clock divider when IDLE state or no bus + /* Enable sys bus clock divider when IDLE state or no bus activity. */ au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); break; diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/au1000/xxs1500/board_setup.c index 9dadc82536f4..1e59433dfd66 100644 --- a/arch/mips/au1000/xxs1500/board_setup.c +++ b/arch/mips/au1000/xxs1500/board_setup.c @@ -49,7 +49,7 @@ void board_reset (void) void __init board_setup(void) { u32 pin_func; - + // set multiple use pins (UART3/GPIO) to UART (it's used as UART too) pin_func = au_readl(SYS_PINFUNC) & (u32)(~SYS_PF_UR3); pin_func |= SYS_PF_UR3; @@ -75,11 +75,11 @@ void __init board_setup(void) au_writel(1, GPIO2_ENABLE); /* gpio2 208/9/10/11 are inputs */ au_writel((1<<8) | (1<<9) | (1<<10) | (1<<11), GPIO2_DIR); - + /* turn off power */ au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<14))|(1<<30), GPIO2_OUTPUT); #endif - + #ifdef CONFIG_PCI #if defined(__MIPSEB__) diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c index 03f755291b51..f1c76533b6fc 100644 --- a/arch/mips/au1000/xxs1500/init.c +++ b/arch/mips/au1000/xxs1500/init.c @@ -55,7 +55,7 @@ void __init prom_init(void) prom_envp = (char **) fw_arg2; mips_machgroup = MACH_GROUP_ALCHEMY; - mips_machtype = MACH_XXS1500; /* set the platform # */ + mips_machtype = MACH_XXS1500; /* set the platform # */ prom_init_cmdline(); diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/au1000/xxs1500/irqmap.c index 954800a0ab52..52f2f7daeb05 100644 --- a/arch/mips/au1000/xxs1500/irqmap.c +++ b/arch/mips/au1000/xxs1500/irqmap.c @@ -56,7 +56,7 @@ au1xxx_irq_map_t au1xxx_irq_map[] = { { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 }, { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, - { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, { AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, { AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* CF interrupt */ diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig index caad7ca27abd..3120a02b8670 100644 --- a/arch/mips/configs/atlas_defconfig +++ b/arch/mips/configs/atlas_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:00 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -88,6 +88,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_MIPS_BONITO64=y CONFIG_MIPS_MSC=y # CONFIG_CPU_LITTLE_ENDIAN is not set diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index 1b7f8a702d06..158e7165f4e3 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:00 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -97,6 +97,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y CONFIG_MIPS_L1_CACHE_SHIFT=5 diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index 8861854561e5..4302c6f914f5 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:00 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -82,6 +82,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_I8259=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index 19cac1bf4f01..962fc14b58c2 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:01 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -104,6 +104,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_MIPS_L1_CACHE_SHIFT=5 diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index 035ac95d197e..6a528d479d70 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:01 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -104,6 +104,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_MIPS_L1_CACHE_SHIFT=5 diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index c38c4ed18fe7..fed6f2fab48b 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:01 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index ee81309ae3a5..178c0ad1af75 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:02 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options diff --git a/arch/mips/configs/ddb5476_defconfig b/arch/mips/configs/ddb5476_defconfig index d43ed57c4b4e..70addc73f699 100644 --- a/arch/mips/configs/ddb5476_defconfig +++ b/arch/mips/configs/ddb5476_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:02 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -82,6 +82,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_I8259=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig index 5a032cdefd63..60292808b384 100644 --- a/arch/mips/configs/ddb5477_defconfig +++ b/arch/mips/configs/ddb5477_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:02 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -83,6 +83,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_I8259=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 32ada79da9d8..66ec1f41d122 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:03 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -88,6 +88,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_EARLY_PRINTK=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index 52074a2085fb..ba2ec01defb1 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:03 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -96,6 +96,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y CONFIG_MIPS_L1_CACHE_SHIFT=5 diff --git a/arch/mips/configs/ev64120_defconfig b/arch/mips/configs/ev64120_defconfig index 360e842fd4be..17e87f70f602 100644 --- a/arch/mips/configs/ev64120_defconfig +++ b/arch/mips/configs/ev64120_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:03 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -89,6 +89,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_MIPS_GT64120=y # CONFIG_SYSCLK_75 is not set diff --git a/arch/mips/configs/ev96100_defconfig b/arch/mips/configs/ev96100_defconfig index 657a9508d31a..9da4140eae00 100644 --- a/arch/mips/configs/ev96100_defconfig +++ b/arch/mips/configs/ev96100_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:03 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -88,6 +88,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_IRQ_CPU=y CONFIG_MIPS_GT64120=y diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index 3fb102e6a7f7..17fa5c4e3ad1 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:04 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -90,6 +90,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_ARC=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_IRQ_CPU=y CONFIG_SWAP_IO_SPACE=y diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index b5bab3a42fc4..b2a67da1e031 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -4,7 +4,7 @@ # Wed Jan 26 02:49:04 2005 # CONFIG_MIPS=y -CONFIG_MIPS64=y +CONFIG_64BIT=y CONFIG_64BIT=y # diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index bdf1415475ff..b26e1173365d 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -4,7 +4,7 @@ # Wed Jan 26 02:49:04 2005 # CONFIG_MIPS=y -CONFIG_MIPS64=y +CONFIG_64BIT=y CONFIG_64BIT=y # @@ -84,6 +84,7 @@ CONFIG_ARC=y CONFIG_DMA_IP32=y CONFIG_OWN_DMA=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_ARC32=y CONFIG_BOOT_ELF32=y diff --git a/arch/mips/configs/it8172_defconfig b/arch/mips/configs/it8172_defconfig index 1ca7746388f0..08bd3ad64761 100644 --- a/arch/mips/configs/it8172_defconfig +++ b/arch/mips/configs/it8172_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:05 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -90,6 +90,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_ITE_BOARD_GEN=y CONFIG_IT8172_CIR=y diff --git a/arch/mips/configs/ivr_defconfig b/arch/mips/configs/ivr_defconfig index c6eef708be1e..583ef5c5b1cd 100644 --- a/arch/mips/configs/ivr_defconfig +++ b/arch/mips/configs/ivr_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:05 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -89,6 +89,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_ITE_BOARD_GEN=y CONFIG_IT8172_CIR=y diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig index 757c4e88cc00..8abb5a0c6c12 100644 --- a/arch/mips/configs/jaguar-atx_defconfig +++ b/arch/mips/configs/jaguar-atx_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:05 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -81,6 +81,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_LIMITED_DMA=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_IRQ_CPU=y diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index e5a613906554..da5d9ee2ecce 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:06 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -82,6 +82,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_MIPS_TX3927=y CONFIG_SWAP_IO_SPACE=y diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig index 1e7697834e90..8d600ae890f4 100644 --- a/arch/mips/configs/lasat200_defconfig +++ b/arch/mips/configs/lasat200_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:06 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -92,6 +92,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_MIPS_NILE4=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_MIPS_GT64120=y diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 61fb9fb97e6e..79519ac5af4a 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:53:14 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -88,6 +88,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_GENERIC_ISA_DMA=y CONFIG_I8259=y CONFIG_MIPS_BONITO64=y diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index 31b8f2ad7338..0fea57ef18f2 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:07 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -97,6 +97,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y CONFIG_MIPS_L1_CACHE_SHIFT=5 diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig index 2cce682fffcf..b4cf97a732bc 100644 --- a/arch/mips/configs/ocelot_3_defconfig +++ b/arch/mips/configs/ocelot_3_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:07 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -89,6 +89,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_IRQ_CPU=y CONFIG_IRQ_CPU_RM7K=y diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig index 0cbf48a62e02..a38903db85a0 100644 --- a/arch/mips/configs/ocelot_c_defconfig +++ b/arch/mips/configs/ocelot_c_defconfig @@ -4,7 +4,7 @@ # Wed Jan 26 02:49:07 2005 # CONFIG_MIPS=y -CONFIG_MIPS64=y +CONFIG_64BIT=y CONFIG_64BIT=y # @@ -80,6 +80,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_IRQ_CPU=y CONFIG_IRQ_MV64340=y diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig index 4043950d360a..920d59b56a4e 100644 --- a/arch/mips/configs/ocelot_defconfig +++ b/arch/mips/configs/ocelot_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:08 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -82,6 +82,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_IRQ_CPU=y CONFIG_IRQ_CPU_RM7K=y diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/ocelot_g_defconfig index 3870af4537ad..ef5ea50893d1 100644 --- a/arch/mips/configs/ocelot_g_defconfig +++ b/arch/mips/configs/ocelot_g_defconfig @@ -4,7 +4,7 @@ # Wed Jan 26 02:49:08 2005 # CONFIG_MIPS=y -CONFIG_MIPS64=y +CONFIG_64BIT=y CONFIG_64BIT=y # @@ -80,6 +80,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_IRQ_CPU=y CONFIG_IRQ_CPU_RM7K=y diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 6cdabd550300..813e3a8b480b 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:08 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -104,6 +104,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SWAP_IO_SPACE=y # CONFIG_AU1X00_USB_DEVICE is not set diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index 2aebbd2e82b3..49e528340a39 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:09 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 9e21edc28280..8e426776c098 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:09 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options diff --git a/arch/mips/configs/osprey_defconfig b/arch/mips/configs/qemu_defconfig index 989cb9e7ae83..b6568e421b99 100644 --- a/arch/mips/configs/osprey_defconfig +++ b/arch/mips/configs/qemu_defconfig @@ -1,108 +1,133 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc2 -# Wed Jan 26 02:49:08 2005 +# Linux kernel version: 2.6.13-rc6 +# Mon Aug 8 11:49:54 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set -# CONFIG_64BIT is not set -CONFIG_MIPS32=y # # Code maturity level options # -CONFIG_EXPERIMENTAL=y +# CONFIG_EXPERIMENTAL is not set CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set +# CONFIG_SWAP is not set +# CONFIG_SYSVIPC is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_SYSCTL is not set # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_FUTEX=y -CONFIG_EPOLL=y +CONFIG_PRINTK=y +# CONFIG_BUG is not set +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y +# CONFIG_SHMEM is not set CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=1 # # Loadable module support # -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y +# CONFIG_MODULES is not set # # Machine selection # -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_MIPS_MTX1 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_DB1200 is not set +# CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set # CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_IVR is not set -# CONFIG_LASAT is not set # CONFIG_MIPS_ITE8172 is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set +# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set -# CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_PMC_YOSEMITE is not set +# CONFIG_MOMENCO_OCELOT_C is not set +# CONFIG_MOMENCO_OCELOT_G is not set +# CONFIG_MIPS_XXS1500 is not set +# CONFIG_PNX8550_V2PCI is not set +# CONFIG_PNX8550_JBS is not set # CONFIG_DDB5074 is not set # CONFIG_DDB5476 is not set # CONFIG_DDB5477 is not set -CONFIG_NEC_OSPREY=y +# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_YOSEMITE is not set +CONFIG_QEMU=y # CONFIG_SGI_IP22 is not set -# CONFIG_SOC_AU1X00 is not set -# CONFIG_SIBYTE_SB1xxx_SOC is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_PTSWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set # CONFIG_SNI_RM200_PCI is not set +# CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_IRQ_CPU=y +CONFIG_DMA_COHERENT=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_I8259=y +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SWAP_IO_SPACE=y CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_VR4181=y +CONFIG_HAVE_STD_PC_SERIAL_PORT=y # # CPU selection # -# CONFIG_CPU_MIPS32 is not set -# CONFIG_CPU_MIPS64 is not set +# CONFIG_CPU_MIPS32_R1 is not set +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -CONFIG_CPU_VR41XX=y +# CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set +CONFIG_CPU_R4X00=y # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set @@ -113,17 +138,36 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_MIPS_MT is not set +# CONFIG_64BIT_PHYS_ADDR is not set # CONFIG_CPU_ADVANCED is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_LLDSCD=y CONFIG_CPU_HAS_SYNC=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # +CONFIG_ISA=y CONFIG_MMU=y # @@ -132,10 +176,6 @@ CONFIG_MMU=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # PCI Hotplug Support # @@ -147,6 +187,56 @@ CONFIG_BINFMT_ELF=y CONFIG_TRAD_SIGNALS=y # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -154,7 +244,7 @@ CONFIG_TRAD_SIGNALS=y # Generic Driver Options # CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set # @@ -170,6 +260,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # +# CONFIG_PNP is not set # # Block devices @@ -181,19 +272,16 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_CDROM_PKTCDVD is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_ATA_OVER_ETH=m +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -206,6 +294,11 @@ CONFIG_ATA_OVER_ETH=m # CONFIG_SCSI is not set # +# Old CD-ROM drivers (not SCSI, not IDE) +# +# CONFIG_CD_NO_IDESCSI is not set + +# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set @@ -213,6 +306,7 @@ CONFIG_ATA_OVER_ETH=m # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -223,84 +317,41 @@ CONFIG_ATA_OVER_ETH=m # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options +# Network device support # -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=m -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set +CONFIG_MII=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +CONFIG_NET_ISA=y +# CONFIG_E2100 is not set +# CONFIG_EWRK3 is not set +# CONFIG_EEXPRESS is not set +# CONFIG_EEXPRESS_PRO is not set +# CONFIG_HPLAN_PLUS is not set +# CONFIG_HPLAN is not set +# CONFIG_LP486E is not set +# CONFIG_ETH16I is not set +CONFIG_NE2000=y +# CONFIG_NET_PCI is not set +# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -313,6 +364,7 @@ CONFIG_NET_ETHERNET=y # # Token Ring devices # +# CONFIG_TR is not set # # Wireless LAN (non-hamradio) @@ -325,8 +377,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -346,28 +398,13 @@ CONFIG_INPUT=y # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=m - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -377,6 +414,12 @@ CONFIG_SERIO_RAW=m # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -397,9 +440,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set # # IPMI @@ -418,13 +460,17 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set +# CONFIG_I2C_SENSOR is not set # # Dallas's 1-wire bus @@ -432,6 +478,11 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set + +# # Misc devices # @@ -453,9 +504,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Console display driver support # -# CONFIG_VGA_CONSOLE is not set +CONFIG_VGA_CONSOLE=y +# CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -469,10 +520,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -488,19 +535,28 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_INFINIBAND is not set # +# SN Devices +# + +# # File systems # -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set + +# +# XFS support +# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -520,12 +576,8 @@ CONFIG_DNOTIFY=y # # Pseudo filesystems # -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -CONFIG_DEVPTS_FS_XATTR=y -CONFIG_DEVPTS_FS_SECURITY=y +# CONFIG_PROC_FS is not set +# CONFIG_SYSFS is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -533,13 +585,7 @@ CONFIG_RAMFS=y # # Miscellaneous filesystems # -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -551,23 +597,18 @@ CONFIG_RAMFS=y # Network File Systems # CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y -CONFIG_EXPORTFS=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set # # Partition Types @@ -581,22 +622,18 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="ip=bootp ether=46,0x03fe0300,eth0" +CONFIG_CMDLINE="console=ttyS0 debug ip=172.20.0.2:172.20.0.1::255.255.0.0" # # Security options # -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # @@ -612,7 +649,7 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Library routines # # CONFIG_CRC_CCITT is not set -# CONFIG_CRC32 is not set -CONFIG_LIBCRC32C=m +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index d0c85a4009d6..17d4fce6c4c6 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:09 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -91,6 +91,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_ARC=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_GENERIC_ISA_DMA=y CONFIG_I8259=y CONFIG_CPU_LITTLE_ENDIAN=y diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 84978b70714b..1dc935f37582 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:10 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig index 7c718a429b04..dd07e866b128 100644 --- a/arch/mips/configs/sead_defconfig +++ b/arch/mips/configs/sead_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:10 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -80,6 +80,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y CONFIG_MIPS_BOARDS_GEN=y diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index e01727cd0fe9..c9d3f83caf0f 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:12 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -95,6 +95,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y CONFIG_MIPS_L1_CACHE_SHIFT=5 diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0229_defconfig index c6ba3de27614..2cb669188aa9 100644 --- a/arch/mips/configs/tb0229_defconfig +++ b/arch/mips/configs/tb0229_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:12 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -98,6 +98,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y CONFIG_MIPS_L1_CACHE_SHIFT=5 diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig new file mode 100644 index 000000000000..17b9f2f65ba0 --- /dev/null +++ b/arch/mips/configs/tb0287_defconfig @@ -0,0 +1,1041 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.13-mm1 +# Thu Sep 1 22:58:34 2005 +# +CONFIG_MIPS=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set + +# +# Machine selection +# +# CONFIG_MACH_JAZZ is not set +CONFIG_MACH_VR41XX=y +# CONFIG_NEC_CMBVR4133 is not set +# CONFIG_CASIO_E55 is not set +# CONFIG_IBM_WORKPAD is not set +CONFIG_TANBAC_TB022X=y +# CONFIG_TANBAC_TB0226 is not set +CONFIG_TANBAC_TB0287=y +# CONFIG_VICTOR_MPC30X is not set +# CONFIG_ZAO_CAPCELLA is not set +CONFIG_PCI_VR41XX=y +# CONFIG_VRC4173 is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MIPS_EV64120 is not set +# CONFIG_MIPS_EV96100 is not set +# CONFIG_MIPS_IVR is not set +# CONFIG_LASAT is not set +# CONFIG_MIPS_ITE8172 is not set +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_G is not set +# CONFIG_MOMENCO_OCELOT_C is not set +# CONFIG_MOMENCO_OCELOT_3 is not set +# CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_DDB5074 is not set +# CONFIG_DDB5476 is not set +# CONFIG_DDB5477 is not set +# CONFIG_QEMU is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SOC_AU1X00 is not set +# CONFIG_SIBYTE_SB1xxx_SOC is not set +# CONFIG_SNI_RM200_PCI is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_HAVE_DEC_LOCK=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_MIPS32 is not set +# CONFIG_CPU_MIPS64 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +CONFIG_CPU_VR41XX=y +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_CPU_ADVANCED is not set +CONFIG_CPU_HAS_SYNC=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_PREEMPT is not set + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +# CONFIG_PCI_LEGACY_PROC is not set +CONFIG_MMU=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_NET_IPGRE_BROADCAST is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +CONFIG_TCP_CONG_ADVANCED=y + +# +# TCP congestion control +# +CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_PCI_AUTO is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +CONFIG_BLK_DEV_SIIMAGE=y +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set + +# +# IEEE 1394 (FireWire) support +# +CONFIG_IEEE1394=m + +# +# Subsystem Options +# +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +# CONFIG_IEEE1394_OUI_DB is not set +CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y +CONFIG_IEEE1394_CONFIG_ROM_IP1394=y +# CONFIG_IEEE1394_EXPORT_FULL_API is not set + +# +# Device Drivers +# + +# +# Texas Instruments PCILynx requires I2C +# +CONFIG_IEEE1394_OHCI1394=m + +# +# Protocol Drivers +# +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_SBP2=m +# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_IEEE1394_RAWIO=m +CONFIG_IEEE1394_CMP=m +CONFIG_IEEE1394_AMDTP=m + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_R8169_NAPI is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_KGDBOE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_VR41XX=y +CONFIG_SERIAL_VR41XX_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_TANBAC_TB0219 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +CONFIG_GPIO_VR41XX=y +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Speakup console speech +# +# CONFIG_SPEAKUP is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_GOTEMP is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_REISER4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set + +# +# XFS support +# +CONFIG_XFS_FS=y +# CONFIG_XFS_RT is not set +CONFIG_XFS_QUOTA=y +# CONFIG_XFS_SECURITY is not set +CONFIG_XFS_POSIX_ACL=y +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=m +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_QUOTACTL=y +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ASFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ISA_DMA_API=y diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index 915c43b6e2d9..16e07fca446f 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:12 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -96,6 +96,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y CONFIG_MIPS_L1_CACHE_SHIFT=5 diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index 562f2b8043ac..6d2290777ad7 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:49:13 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options diff --git a/arch/mips/ddb5xxx/ddb5477/irq.c b/arch/mips/ddb5xxx/ddb5477/irq.c index 5f027bfa4af8..9ffe1a9142ca 100644 --- a/arch/mips/ddb5xxx/ddb5477/irq.c +++ b/arch/mips/ddb5xxx/ddb5477/irq.c @@ -76,7 +76,7 @@ set_pci_int_attr(u32 pci, u32 intn, u32 active, u32 trigger) extern void vrc5477_irq_init(u32 base); extern void mips_cpu_irq_init(u32 base); extern asmlinkage void ddb5477_handle_int(void); -extern int setup_irq(unsigned int irq, struct irqaction *irqaction); +extern int setup_irq(unsigned int irq, struct irqaction *irqaction); static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL }; void __init arch_init_irq(void) @@ -94,7 +94,7 @@ void __init arch_init_irq(void) /* setup PCI interrupt attributes */ set_pci_int_attr(PCI0, INTA, ACTIVE_LOW, LEVEL_SENSE); set_pci_int_attr(PCI0, INTB, ACTIVE_LOW, LEVEL_SENSE); - if (mips_machtype == MACH_NEC_ROCKHOPPERII) + if (mips_machtype == MACH_NEC_ROCKHOPPERII) set_pci_int_attr(PCI0, INTC, ACTIVE_HIGH, LEVEL_SENSE); else set_pci_int_attr(PCI0, INTC, ACTIVE_LOW, LEVEL_SENSE); @@ -134,7 +134,7 @@ void __init arch_init_irq(void) /* setup cascade interrupts */ setup_irq(VRC5477_IRQ_BASE + VRC5477_I8259_CASCADE, &irq_cascade); - setup_irq(CPU_IRQ_BASE + CPU_VRC5477_CASCADE, &irq_cascade); + setup_irq(CPU_IRQ_BASE + CPU_VRC5477_CASCADE, &irq_cascade); /* hook up the first-level interrupt handler */ set_except_vector(0, ddb5477_handle_int); diff --git a/arch/mips/ddb5xxx/ddb5477/setup.c b/arch/mips/ddb5xxx/ddb5477/setup.c index 15c6e543b56f..d62f5a789b05 100644 --- a/arch/mips/ddb5xxx/ddb5477/setup.c +++ b/arch/mips/ddb5xxx/ddb5477/setup.c @@ -141,7 +141,7 @@ static void __init ddb_time_init(void) /* mips_hpt_frequency is 1/2 of the cpu core freq */ i = (read_c0_config() >> 28 ) & 7; - if ((current_cpu_data.cputype == CPU_R5432) && (i == 3)) + if ((current_cpu_data.cputype == CPU_R5432) && (i == 3)) i = 4; mips_hpt_frequency = bus_frequency*(i+4)/4; } @@ -298,11 +298,11 @@ static void __init ddb5477_board_init(void) if (mips_machtype == MACH_NEC_ROCKHOPPER || mips_machtype == MACH_NEC_ROCKHOPPERII) { - /* Disable bus diagnostics. */ + /* Disable bus diagnostics. */ ddb_out32(DDB_PCICTL0_L, 0); ddb_out32(DDB_PCICTL0_H, 0); ddb_out32(DDB_PCICTL1_L, 0); - ddb_out32(DDB_PCICTL1_H, 0); + ddb_out32(DDB_PCICTL1_H, 0); } if (mips_machtype == MACH_NEC_ROCKHOPPER) { @@ -354,7 +354,7 @@ static void __init ddb5477_board_init(void) */ pci_write_config_byte(&dev_m1533, 0x58, 0x74); - /* + /* * positive decode (bit6 -0) * enable IDE controler interrupt (bit 4 -1) * setup SIRQ to point to IRQ 14 (bit 3:0 - 1101) @@ -364,31 +364,31 @@ static void __init ddb5477_board_init(void) /* Setup M5229 registers */ dev_m5229.bus = &bus; dev_m5229.sysdata = NULL; - dev_m5229.devfn = 4*8; // slot 4 (AD15): M5229 IDE + dev_m5229.devfn = 4*8; // slot 4 (AD15): M5229 IDE /* * enable IDE in the M5229 config register 0x50 (bit 0 - 1) - * M5229 IDSEL is addr:15; see above setting + * M5229 IDSEL is addr:15; see above setting */ pci_read_config_byte(&dev_m5229, 0x50, &temp8); pci_write_config_byte(&dev_m5229, 0x50, temp8 | 0x1); - /* - * enable bus master (bit 2) and IO decoding (bit 0) + /* + * enable bus master (bit 2) and IO decoding (bit 0) */ pci_read_config_byte(&dev_m5229, 0x04, &temp8); pci_write_config_byte(&dev_m5229, 0x04, temp8 | 0x5); /* * enable native, copied from arch/ppc/k2boot/head.S - * TODO - need volatile, need to be portable + * TODO - need volatile, need to be portable */ pci_write_config_byte(&dev_m5229, 0x09, 0xef); - /* Set Primary Channel Command Block Timing */ + /* Set Primary Channel Command Block Timing */ pci_write_config_byte(&dev_m5229, 0x59, 0x31); - /* + /* * Enable primary channel 40-pin cable * M5229 register 0x4a (bit 0) */ diff --git a/arch/mips/dec/ecc-berr.c b/arch/mips/dec/ecc-berr.c index 133fb7c48e6c..6dbce92eb068 100644 --- a/arch/mips/dec/ecc-berr.c +++ b/arch/mips/dec/ecc-berr.c @@ -253,7 +253,7 @@ static inline void dec_kn03_be_init(void) kn0x_erraddr = (void *)(KN03_SLOT_BASE + IOASIC_ERRADDR); kn0x_chksyn = (void *)(KN03_SLOT_BASE + IOASIC_CHKSYN); - + /* * Set normal ECC detection and generation, enable ECC correction. * For KN05 we also need to make sure EE (?) is enabled in the MB. diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S index 3b3790993219..c89768d5c4e5 100644 --- a/arch/mips/dec/int-handler.S +++ b/arch/mips/dec/int-handler.S @@ -133,7 +133,7 @@ */ mfc0 t0,CP0_CAUSE # get pending interrupts mfc0 t1,CP0_STATUS -#ifdef CONFIG_MIPS32 +#ifdef CONFIG_32BIT lw t2,cpu_fpu_mask #endif andi t0,ST0_IM # CAUSE.CE may be non-zero! @@ -141,7 +141,7 @@ beqz t0,spurious -#ifdef CONFIG_MIPS32 +#ifdef CONFIG_32BIT and t2,t0 bnez t2,fpu # handle FPU immediately #endif @@ -271,7 +271,7 @@ handle_it: j ret_from_irq nop -#ifdef CONFIG_MIPS32 +#ifdef CONFIG_32BIT fpu: j handle_fpe_int nop diff --git a/arch/mips/dec/prom/Makefile b/arch/mips/dec/prom/Makefile index 373822ec2d8c..bcd0247b3a66 100644 --- a/arch/mips/dec/prom/Makefile +++ b/arch/mips/dec/prom/Makefile @@ -5,7 +5,7 @@ lib-y += init.o memory.o cmdline.o identify.o console.o -lib-$(CONFIG_MIPS32) += locore.o -lib-$(CONFIG_MIPS64) += call_o32.o +lib-$(CONFIG_32BIT) += locore.o +lib-$(CONFIG_64BIT) += call_o32.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/defconfig b/arch/mips/defconfig index d55fe665926f..20f84b119b4c 100644 --- a/arch/mips/defconfig +++ b/arch/mips/defconfig @@ -4,9 +4,9 @@ # Wed Jan 26 02:48:59 2005 # CONFIG_MIPS=y -# CONFIG_MIPS64 is not set # CONFIG_64BIT is not set -CONFIG_MIPS32=y +# CONFIG_64BIT is not set +CONFIG_32BIT=y # # Code maturity level options @@ -90,6 +90,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_ARC=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_IRQ_CPU=y CONFIG_SWAP_IO_SPACE=y diff --git a/arch/mips/ite-boards/generic/it8172_setup.c b/arch/mips/ite-boards/generic/it8172_setup.c index d808a67294b8..a5f6d84bc181 100644 --- a/arch/mips/ite-boards/generic/it8172_setup.c +++ b/arch/mips/ite-boards/generic/it8172_setup.c @@ -129,7 +129,7 @@ static void __init it8172_setup(void) /* * IO/MEM resources. - * + * * revisit this area. */ set_io_port_base(KSEG1); diff --git a/arch/mips/ite-boards/generic/time.c b/arch/mips/ite-boards/generic/time.c index 30a6c0d5fc50..f5d67ee21ac6 100644 --- a/arch/mips/ite-boards/generic/time.c +++ b/arch/mips/ite-boards/generic/time.c @@ -72,7 +72,7 @@ static inline int rtc_dm_binary(void) { return saved_control & RTC_DM_BINARY; } static inline unsigned char bin_to_hw(unsigned char c) { - if (rtc_dm_binary()) + if (rtc_dm_binary()) return c; else return ((c/10) << 4) + (c%10); @@ -91,9 +91,9 @@ hw_to_bin(unsigned char c) static inline unsigned char hour_bin_to_hw(unsigned char c) { - if (rtc_24h()) + if (rtc_24h()) return bin_to_hw(c); - if (c >= 12) + if (c >= 12) return 0x80 | bin_to_hw((c==12)?12:c-12); /* 12 is 12pm */ else return bin_to_hw((c==0)?12:c); /* 0 is 12 AM, not 0 am */ @@ -105,9 +105,9 @@ hour_hw_to_bin(unsigned char c) unsigned char tmp = hw_to_bin(c&0x3f); if (rtc_24h()) return tmp; - if (c & 0x80) + if (c & 0x80) return (tmp==12)?12:tmp+12; /* 12pm is 12, not 24 */ - else + else return (tmp==12)?0:tmp; /* 12am is 0 */ } @@ -145,7 +145,7 @@ static unsigned long __init cal_r4koff(void) return (mips_hpt_frequency / HZ); } -static unsigned long +static unsigned long it8172_rtc_get_time(void) { unsigned int year, mon, day, hour, min, sec; @@ -166,12 +166,12 @@ it8172_rtc_get_time(void) hour = hour_hw_to_bin(CMOS_READ(RTC_HOURS)); day = hw_to_bin(CMOS_READ(RTC_DAY_OF_MONTH)); mon = hw_to_bin(CMOS_READ(RTC_MONTH)); - year = hw_to_bin(CMOS_READ(RTC_YEAR)) + + year = hw_to_bin(CMOS_READ(RTC_YEAR)) + hw_to_bin(*rtc_century_reg) * 100; /* restore interrupts */ local_irq_restore(flags); - + return mktime(year, mon, day, hour, min, sec); } diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index a0230ee0f7f4..d3303584fbd1 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -13,8 +13,8 @@ binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \ ifdef CONFIG_MODULES obj-y += mips_ksyms.o module.o -obj-$(CONFIG_MIPS32) += module-elf32.o -obj-$(CONFIG_MIPS64) += module-elf64.o +obj-$(CONFIG_32BIT) += module-elf32.o +obj-$(CONFIG_64BIT) += module-elf64.o endif obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o @@ -45,8 +45,8 @@ obj-$(CONFIG_IRQ_CPU_RM7K) += irq-rm7000.o obj-$(CONFIG_IRQ_CPU_RM9K) += irq-rm9000.o obj-$(CONFIG_IRQ_MV64340) += irq-mv6434x.o -obj-$(CONFIG_MIPS32) += scall32-o32.o -obj-$(CONFIG_MIPS64) += scall64-64.o +obj-$(CONFIG_32BIT) += scall32-o32.o +obj-$(CONFIG_64BIT) += scall64-64.o obj-$(CONFIG_BINFMT_IRIX) += binfmt_irix.o obj-$(CONFIG_MIPS32_COMPAT) += ioctl32.o linux32.o signal32.o obj-$(CONFIG_MIPS32_N32) += binfmt_elfn32.o scall64-n32.o signal_n32.o @@ -55,7 +55,7 @@ obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o ptrace32.o obj-$(CONFIG_KGDB) += gdb-low.o gdb-stub.o obj-$(CONFIG_PROC_FS) += proc.o -obj-$(CONFIG_MIPS64) += cpu-bugs64.o +obj-$(CONFIG_64BIT) += cpu-bugs64.o obj-$(CONFIG_GEN_RTC) += genrtc.o diff --git a/arch/mips/kernel/offset.c b/arch/mips/kernel/asm-offsets.c index 2c11abb5a406..2c11abb5a406 100644 --- a/arch/mips/kernel/offset.c +++ b/arch/mips/kernel/asm-offsets.c diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c index ed47041f3030..6b645fbb1ddc 100644 --- a/arch/mips/kernel/binfmt_elfn32.c +++ b/arch/mips/kernel/binfmt_elfn32.c @@ -103,7 +103,7 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value) * Convert jiffies to nanoseconds and seperate with * one divide. */ - u64 nsec = (u64)jiffies * TICK_NSEC; + u64 nsec = (u64)jiffies * TICK_NSEC; value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &value->tv_usec); value->tv_usec /= NSEC_PER_USEC; } diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c index ee21b18c37a8..b4075e99c452 100644 --- a/arch/mips/kernel/binfmt_elfo32.c +++ b/arch/mips/kernel/binfmt_elfo32.c @@ -105,7 +105,7 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value) * Convert jiffies to nanoseconds and seperate with * one divide. */ - u64 nsec = (u64)jiffies * TICK_NSEC; + u64 nsec = (u64)jiffies * TICK_NSEC; value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &value->tv_usec); value->tv_usec /= NSEC_PER_USEC; } diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c index 11ebe5d4c446..47a087b6c11b 100644 --- a/arch/mips/kernel/cpu-bugs64.c +++ b/arch/mips/kernel/cpu-bugs64.c @@ -137,7 +137,7 @@ static inline void check_mult_sh(void) for (i = 0; i < 8; i++) if (v1[i] != w[i]) bug = 1; - + if (bug == 0) { printk("no.\n"); return; @@ -149,7 +149,7 @@ static inline void check_mult_sh(void) for (i = 0; i < 8; i++) if (v2[i] != w[i]) fix = 0; - + if (fix == 1) { printk("yes.\n"); return; diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 4bb849582314..7685f8baf3f0 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -229,15 +229,9 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) break; case PRID_IMP_VR41XX: switch (c->processor_id & 0xf0) { -#ifndef CONFIG_VR4181 case PRID_REV_VR4111: c->cputype = CPU_VR4111; break; -#else - case PRID_REV_VR4181: - c->cputype = CPU_VR4181; - break; -#endif case PRID_REV_VR4121: c->cputype = CPU_VR4121; break; diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S index ece6ddaf7011..512bedbfa7b9 100644 --- a/arch/mips/kernel/gdb-low.S +++ b/arch/mips/kernel/gdb-low.S @@ -13,13 +13,13 @@ #include <asm/stackframe.h> #include <asm/gdb-stub.h> -#ifdef CONFIG_MIPS32 +#ifdef CONFIG_32BIT #define DMFC0 mfc0 #define DMTC0 mtc0 #define LDC1 lwc1 #define SDC1 lwc1 #endif -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT #define DMFC0 dmfc0 #define DMTC0 dmtc0 #define LDC1 ldc1 diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c index 269889302a27..d3fd1ab14274 100644 --- a/arch/mips/kernel/gdb-stub.c +++ b/arch/mips/kernel/gdb-stub.c @@ -687,8 +687,8 @@ void handle_exception (struct gdb_regs *regs) * acquire the big kgdb spinlock */ if (!spin_trylock(&kgdb_lock)) { - /* - * some other CPU has the lock, we should go back to + /* + * some other CPU has the lock, we should go back to * receive the gdb_wait IPC */ return; @@ -703,7 +703,7 @@ void handle_exception (struct gdb_regs *regs) async_bp.addr = 0; } - /* + /* * acquire the CPU spinlocks */ for (i = num_online_cpus()-1; i >= 0; i--) @@ -894,7 +894,7 @@ void handle_exception (struct gdb_regs *regs) ptr = &input_buffer[1]; if (hexToLong(&ptr, &addr)) regs->cp0_epc = addr; - + goto exit_kgdb_exception; break; @@ -1001,7 +1001,7 @@ void breakpoint(void) return; __asm__ __volatile__( - ".globl breakinst\n\t" + ".globl breakinst\n\t" ".set\tnoreorder\n\t" "nop\n" "breakinst:\tbreak\n\t" @@ -1014,7 +1014,7 @@ void breakpoint(void) void async_breakpoint(void) { __asm__ __volatile__( - ".globl async_breakinst\n\t" + ".globl async_breakinst\n\t" ".set\tnoreorder\n\t" "nop\n" "async_breakinst:\tbreak\n\t" diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index a5b0a389b063..e7f6c1b90806 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -54,7 +54,7 @@ NESTED(except_vec3_generic, 0, sp) #endif mfc0 k1, CP0_CAUSE andi k1, k1, 0x7c -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT dsll k1, k1, 1 #endif PTR_L k0, exception_handlers(k1) @@ -81,7 +81,7 @@ NESTED(except_vec3_r4000, 0, sp) beq k1, k0, handle_vced li k0, 14<<2 beq k1, k0, handle_vcei -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT dsll k1, k1, 1 #endif .set pop @@ -244,12 +244,12 @@ NESTED(nmi_handler, PT_SIZE, sp) start with an n and gas will believe \n is ok ... */ .macro __BUILD_verbose nexception LONG_L a1, PT_EPC(sp) -#if CONFIG_MIPS32 +#ifdef CONFIG_32BIT PRINT("Got \nexception at %08lx\012") -#endif -#if CONFIG_MIPS64 +#endif +#ifdef CONFIG_64BIT PRINT("Got \nexception at %016lx\012") -#endif +#endif .endm .macro __BUILD_count exception @@ -293,7 +293,7 @@ NESTED(nmi_handler, PT_SIZE, sp) BUILD_HANDLER mcheck mcheck cli verbose /* #24 */ BUILD_HANDLER reserved reserved sti verbose /* others */ -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT /* A temporary overflow handler used by check_daddi(). */ __INIT diff --git a/arch/mips/kernel/genrtc.c b/arch/mips/kernel/genrtc.c index 288bf51ad4ec..71416e7bbbaa 100644 --- a/arch/mips/kernel/genrtc.c +++ b/arch/mips/kernel/genrtc.c @@ -14,7 +14,7 @@ #include <asm/rtc.h> #include <asm/time.h> -static spinlock_t mips_rtc_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(mips_rtc_lock); unsigned int get_rtc_time(struct rtc_time *time) { diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S index a64e87d22014..2a1b45d66f04 100644 --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S @@ -107,7 +107,7 @@ .endm .macro setup_c0_status_pri -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT setup_c0_status ST0_KX 0 #else setup_c0_status 0 0 @@ -115,7 +115,7 @@ .endm .macro setup_c0_status_sec -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT setup_c0_status ST0_KX ST0_BEV #else setup_c0_status 0 ST0_BEV @@ -215,7 +215,7 @@ NESTED(smp_bootstrap, 16, sp) * slightly different layout ... */ page swapper_pg_dir, _PGD_ORDER -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT page invalid_pmd_table, _PMD_ORDER #endif page invalid_pte_table, _PTE_ORDER diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index 7eec7568bfea..447759201d1d 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -31,7 +31,7 @@ void disable_8259A_irq(unsigned int irq); * moves to arch independent land */ -spinlock_t i8259A_lock = SPIN_LOCK_UNLOCKED; +spinlock_t DEFINE_SPINLOCK(i8259A_lock); static void end_8259A_irq (unsigned int irq) { diff --git a/arch/mips/kernel/ioctl32.c b/arch/mips/kernel/ioctl32.c index 519cd5d0aebb..c069719ff0d8 100644 --- a/arch/mips/kernel/ioctl32.c +++ b/arch/mips/kernel/ioctl32.c @@ -27,7 +27,7 @@ long sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg); #include "compat_ioctl.c" typedef int (* ioctl32_handler_t)(unsigned int, unsigned int, unsigned long, struct file *); - + #define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL((cmd),sys_ioctl) #define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl32_handler_t)(handler), NULL }, #define IOCTL_TABLE_START \ diff --git a/arch/mips/kernel/irixioctl.c b/arch/mips/kernel/irixioctl.c index 4cd3d38a22c2..3cdc22346f4c 100644 --- a/arch/mips/kernel/irixioctl.c +++ b/arch/mips/kernel/irixioctl.c @@ -14,6 +14,7 @@ #include <linux/syscalls.h> #include <linux/tty.h> #include <linux/file.h> +#include <linux/rcupdate.h> #include <asm/uaccess.h> #include <asm/ioctl.h> @@ -33,7 +34,7 @@ static struct tty_struct *get_tty(int fd) struct file *filp; struct tty_struct *ttyp = NULL; - spin_lock(¤t->files->file_lock); + rcu_read_lock(); filp = fcheck(fd); if(filp && filp->private_data) { ttyp = (struct tty_struct *) filp->private_data; @@ -41,7 +42,7 @@ static struct tty_struct *get_tty(int fd) if(ttyp->magic != TTY_MAGIC) ttyp =NULL; } - spin_unlock(¤t->files->file_lock); + rcu_read_unlock(); return ttyp; } diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c index 40244782a8e5..eff89322ba50 100644 --- a/arch/mips/kernel/irixsig.c +++ b/arch/mips/kernel/irixsig.c @@ -155,13 +155,12 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info, else setup_irix_frame(ka, regs, sig, oldset); - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); } asmlinkage int do_irix_signal(sigset_t *oldset, struct pt_regs *regs) @@ -441,18 +440,6 @@ struct irix5_siginfo { } stuff; }; -static inline unsigned long timespectojiffies(struct timespec *value) -{ - unsigned long sec = (unsigned) value->tv_sec; - long nsec = value->tv_nsec; - - if (sec > (LONG_MAX / HZ)) - return LONG_MAX; - nsec += 1000000000L / HZ - 1; - nsec /= 1000000000L / HZ; - return HZ * sec + nsec; -} - asmlinkage int irix_sigpoll_sys(unsigned long *set, struct irix5_siginfo *info, struct timespec *tp) { @@ -490,14 +477,13 @@ asmlinkage int irix_sigpoll_sys(unsigned long *set, struct irix5_siginfo *info, error = -EINVAL; goto out; } - expire = timespectojiffies(tp)+(tp->tv_sec||tp->tv_nsec); + expire = timespec_to_jiffies(tp) + (tp->tv_sec||tp->tv_nsec); } while(1) { long tmp = 0; - current->state = TASK_INTERRUPTIBLE; - expire = schedule_timeout(expire); + expire = schedule_timeout_interruptible(expire); for (i=0; i<=4; i++) tmp |= (current->pending.signal.sig[i] & kset.sig[i]); diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index 441157a1f994..7d93992e462c 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -77,7 +77,7 @@ int show_interrupts(struct seq_file *p, void *v) if (i < NR_IRQS) { spin_lock_irqsave(&irq_desc[i].lock, flags); action = irq_desc[i].action; - if (!action) + if (!action) goto skip; seq_printf(p, "%3d: ",i); #ifndef CONFIG_SMP diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 993abc868e54..ece4564919d8 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -313,7 +313,7 @@ asmlinkage int sys32_sysinfo(struct sysinfo32 *info) struct sysinfo s; int ret, err; mm_segment_t old_fs = get_fs (); - + set_fs (KERNEL_DS); ret = sys_sysinfo(&s); set_fs (old_fs); @@ -546,21 +546,21 @@ struct msgbuf32 { s32 mtype; char mtext[1]; }; struct ipc_perm32 { key_t key; - compat_uid_t uid; - compat_gid_t gid; - compat_uid_t cuid; - compat_gid_t cgid; + __compat_uid_t uid; + __compat_gid_t gid; + __compat_uid_t cuid; + __compat_gid_t cgid; compat_mode_t mode; unsigned short seq; }; struct ipc64_perm32 { key_t key; - compat_uid_t uid; - compat_gid_t gid; - compat_uid_t cuid; - compat_gid_t cgid; - compat_mode_t mode; + __compat_uid_t uid; + __compat_gid_t gid; + __compat_uid_t cuid; + __compat_gid_t cgid; + compat_mode_t mode; unsigned short seq; unsigned short __pad1; unsigned int __unused1; @@ -1334,17 +1334,17 @@ asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t *offset, mm_segment_t old_fs = get_fs(); int ret; off_t of; - + if (offset && get_user(of, offset)) return -EFAULT; - + set_fs(KERNEL_DS); ret = sys_sendfile(out_fd, in_fd, offset ? &of : NULL, count); set_fs(old_fs); - + if (offset && put_user(of, offset)) return -EFAULT; - + return ret; } @@ -1362,11 +1362,11 @@ static unsigned char socketcall_nargs[18]={AL(0),AL(3),AL(3),AL(3),AL(2),AL(3), #undef AL /* - * System call vectors. + * System call vectors. * * Argument checking cleaned up. Saved 20% in size. * This function doesn't need to set the kernel lock because - * it is set by the callees. + * it is set by the callees. */ asmlinkage long sys32_socketcall(int call, unsigned int *args32) @@ -1402,11 +1402,11 @@ asmlinkage long sys32_socketcall(int call, unsigned int *args32) /* copy_from_user should be SMP safe. */ if (copy_from_user(a, args32, socketcall_nargs[call])) return -EFAULT; - + a0=a[0]; a1=a[1]; - - switch(call) + + switch(call) { case SYS_SOCKET: err = sys_socket(a0,a1,a[2]); diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c index eed29fc9dc82..86e42c633f73 100644 --- a/arch/mips/kernel/mips_ksyms.c +++ b/arch/mips/kernel/mips_ksyms.c @@ -35,7 +35,7 @@ EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(strcat); EXPORT_SYMBOL(strchr); -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT EXPORT_SYMBOL(strncmp); #endif EXPORT_SYMBOL(strlen); diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 6e70c42c2058..e4f2f8011387 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -70,7 +70,7 @@ void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp) /* New thread loses kernel privileges. */ status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|KU_MASK); -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT status &= ~ST0_FR; status |= (current->thread.mflags & MF_32BIT_REGS) ? 0 : ST0_FR; #endif @@ -236,10 +236,10 @@ static int __init get_frame_info(struct mips_frame_info *info, void *func) break; if ( -#ifdef CONFIG_MIPS32 +#ifdef CONFIG_32BIT ip->i_format.opcode == sw_op && #endif -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT ip->i_format.opcode == sd_op && #endif ip->i_format.rs == 29) @@ -353,7 +353,7 @@ schedule_timeout_caller: out: -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT if (current->thread.mflags & MF_32BIT_REGS) /* Kludge for 32-bit ps */ pc &= 0xffffffffUL; #endif diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index 92e70ca3bff9..0b571a5b4b83 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -124,7 +124,7 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data) if (tsk_used_math(child)) { fpureg_t *fregs = get_fpu_regs(child); -#ifdef CONFIG_MIPS32 +#ifdef CONFIG_32BIT /* * The odd registers are actually the high * order bits of the values stored in the even @@ -135,7 +135,7 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data) else tmp = (unsigned long) (fregs[(addr - 32)] & 0xffffffff); #endif -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT tmp = fregs[addr - FPR_BASE]; #endif } else { @@ -213,7 +213,7 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data) sizeof(child->thread.fpu.hard)); child->thread.fpu.hard.fcr31 = 0; } -#ifdef CONFIG_MIPS32 +#ifdef CONFIG_32BIT /* * The odd registers are actually the high order bits * of the values stored in the even registers - unless @@ -227,7 +227,7 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data) fregs[addr - FPR_BASE] |= data; } #endif -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT fregs[addr - FPR_BASE] = data; #endif break; @@ -304,14 +304,14 @@ out: static inline int audit_arch(void) { #ifdef CONFIG_CPU_LITTLE_ENDIAN -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT if (!(current->thread.mflags & MF_32BIT_REGS)) return AUDIT_ARCH_MIPSEL64; #endif /* MIPS64 */ return AUDIT_ARCH_MIPSEL; #else /* big endian... */ -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT if (!(current->thread.mflags & MF_32BIT_REGS)) return AUDIT_ARCH_MIPS64; #endif /* MIPS64 */ diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S index f83c31f720c4..ac68e68339db 100644 --- a/arch/mips/kernel/r2300_fpu.S +++ b/arch/mips/kernel/r2300_fpu.S @@ -15,7 +15,7 @@ #include <asm/errno.h> #include <asm/fpregdef.h> #include <asm/mipsregs.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> #include <asm/regdef.h> #define EX(a,b) \ diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S index 243e7b629af6..0d9c4a32a9c2 100644 --- a/arch/mips/kernel/r2300_switch.S +++ b/arch/mips/kernel/r2300_switch.S @@ -15,7 +15,7 @@ #include <asm/cachectl.h> #include <asm/fpregdef.h> #include <asm/mipsregs.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> #include <asm/page.h> #include <asm/regdef.h> #include <asm/stackframe.h> @@ -35,7 +35,7 @@ /* * FPU context is saved iff the process has used it's FPU in the current * time slice as indicated by TIF_USEDFPU. In any case, the CU1 bit for user - * space STATUS register should be 0, so that a process *always* starts its + * space STATUS register should be 0, so that a process *always* starts its * userland with FPU disabled after each context switch. * * FPU will be enabled as soon as the process accesses FPU again, through @@ -55,7 +55,7 @@ LEAF(resume) cpu_save_nonscratch a0 sw ra, THREAD_REG31(a0) - /* + /* * check if we need to save FPU registers */ lw t3, TASK_THREAD_INFO(a0) diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S index ebb643d8d14c..1a14c6b18829 100644 --- a/arch/mips/kernel/r4k_fpu.S +++ b/arch/mips/kernel/r4k_fpu.S @@ -17,7 +17,7 @@ #include <asm/errno.h> #include <asm/fpregdef.h> #include <asm/mipsregs.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> #include <asm/regdef.h> .macro EX insn, reg, src @@ -36,7 +36,7 @@ LEAF(_save_fp_context) cfc1 t1, fcr31 -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT /* Store the 16 odd double precision registers */ EX sdc1 $f1, SC_FPREGS+8(a0) EX sdc1 $f3, SC_FPREGS+24(a0) @@ -118,7 +118,7 @@ LEAF(_save_fp_context32) */ LEAF(_restore_fp_context) EX lw t0, SC_FPC_CSR(a0) -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT EX ldc1 $f1, SC_FPREGS+8(a0) EX ldc1 $f3, SC_FPREGS+24(a0) EX ldc1 $f5, SC_FPREGS+40(a0) diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S index 1fc3b2eb12bd..d2afbd19a9c8 100644 --- a/arch/mips/kernel/r4k_switch.S +++ b/arch/mips/kernel/r4k_switch.S @@ -15,7 +15,7 @@ #include <asm/cachectl.h> #include <asm/fpregdef.h> #include <asm/mipsregs.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> #include <asm/page.h> #include <asm/pgtable-bits.h> #include <asm/regdef.h> @@ -33,7 +33,7 @@ /* * FPU context is saved iff the process has used it's FPU in the current * time slice as indicated by _TIF_USEDFPU. In any case, the CU1 bit for user - * space STATUS register should be 0, so that a process *always* starts its + * space STATUS register should be 0, so that a process *always* starts its * userland with FPU disabled after each context switch. * * FPU will be enabled as soon as the process accesses FPU again, through @@ -105,7 +105,7 @@ * Save a thread's fp context. */ LEAF(_save_fp) -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT mfc0 t1, CP0_STATUS #endif fpu_save_double a0 t1 t0 t2 # clobbers t1 @@ -142,7 +142,7 @@ LEAF(_init_fpu) li t1, -1 # SNaN -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT sll t0, t0, 5 bgez t0, 1f # 16 / 32 register mode? @@ -164,7 +164,7 @@ LEAF(_init_fpu) dmtc1 t1, $f31 1: #endif - + #ifdef CONFIG_CPU_MIPS32 mtc1 t1, $f0 mtc1 t1, $f1 diff --git a/arch/mips/kernel/r6000_fpu.S b/arch/mips/kernel/r6000_fpu.S index d8d3b13fe57f..43cda53f5af6 100644 --- a/arch/mips/kernel/r6000_fpu.S +++ b/arch/mips/kernel/r6000_fpu.S @@ -13,7 +13,7 @@ #include <asm/asm.h> #include <asm/fpregdef.h> #include <asm/mipsregs.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> #include <asm/regdef.h> .set noreorder diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 344f2e29eb61..17b5030fb6ea 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -19,7 +19,7 @@ #include <asm/thread_info.h> #include <asm/unistd.h> #include <asm/war.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> /* Highest syscall used of any syscall flavour */ #define MAX_SYSCALL_NO __NR_O32_Linux + __NR_O32_Linux_syscalls diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 32efb888160a..ffb22a2068bf 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -14,7 +14,7 @@ #include <asm/mipsregs.h> #include <asm/regdef.h> #include <asm/stackframe.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> #include <asm/sysmips.h> #include <asm/thread_info.h> #include <asm/unistd.h> diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 3a240e3e004c..12b531c295c4 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -241,7 +241,7 @@ static inline int parse_rd_cmdline(unsigned long* rd_start, unsigned long* rd_en if (*tmp) strcat(command_line, tmp); -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT /* HACK: Guess if the sign extension was forgotten */ if (start > 0x0000000080000000 && start < 0x00000000ffffffff) start |= 0xffffffff00000000; @@ -446,7 +446,7 @@ static inline void resource_init(void) { int i; -#if defined(CONFIG_MIPS64) && !defined(CONFIG_BUILD_ELF64) +#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64) /* * The 64bit code in 32bit object format trick can't represent * 64bit wide relocations for linker script symbols. diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 65ee15396ffd..0209c1dd1429 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -425,13 +425,12 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info, setup_frame(ka, regs, sig, oldset); #endif - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); } extern int do_signal32(sigset_t *oldset, struct pt_regs *regs); diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index c1a69cf232f9..8ddfbd8d425a 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -558,7 +558,7 @@ static inline int setup_sigcontext32(struct pt_regs *regs, if (!used_math()) goto out; - /* + /* * Save FPU state to signal context. Signal handler will "inherit" * current FPU state. */ @@ -751,13 +751,12 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info, else setup_frame(ka, regs, sig, oldset); - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); } int do_signal32(sigset_t *oldset, struct pt_regs *regs) diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index ae2a1312d4ef..21e3e13a4b44 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -31,7 +31,7 @@ #include <asm/cachectl.h> #include <asm/cacheflush.h> #include <asm/ipc.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> #include <asm/signal.h> #include <asm/sim.h> #include <asm/shmparam.h> diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c index f3bf0e43b8bb..4de155699c4f 100644 --- a/arch/mips/kernel/sysirix.c +++ b/arch/mips/kernel/sysirix.c @@ -632,10 +632,7 @@ asmlinkage int irix_stime(int value) write_seqlock_irq(&xtime_lock); xtime.tv_sec = value; xtime.tv_nsec = 0; - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); return 0; @@ -1035,8 +1032,7 @@ bad: asmlinkage int irix_sginap(int ticks) { - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(ticks); + schedule_timeout_interruptible(ticks); return 0; } diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 648c82292ed6..0dd0df7a3b04 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -223,10 +223,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); @@ -442,7 +439,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * called as close as possible to 500 ms before the new second starts. */ write_seqlock(&xtime_lock); - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 56c36e42e0a6..a53b1ed7b386 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -924,7 +924,7 @@ void __init per_cpu_trap_init(void) * flag that some firmware may have left set and the TS bit (for * IP27). Set XX for ISA IV code to work. */ -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT status_set |= ST0_FR|ST0_KX|ST0_SX|ST0_UX; #endif if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV) diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c index 3f24a1d45865..36c5212e0928 100644 --- a/arch/mips/kernel/unaligned.c +++ b/arch/mips/kernel/unaligned.c @@ -240,7 +240,7 @@ static inline int emulate_load_store_insn(struct pt_regs *regs, break; case lwu_op: -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT /* * A 32-bit kernel might be running on a 64-bit processor. But * if we're on a 32-bit processor and an i-cache incoherency @@ -278,13 +278,13 @@ static inline int emulate_load_store_insn(struct pt_regs *regs, *newvalue = value; *regptr = ®s->regs[insn.i_format.rt]; break; -#endif /* CONFIG_MIPS64 */ +#endif /* CONFIG_64BIT */ /* Cannot handle 64-bit instructions in 32-bit kernel */ goto sigill; case ld_op: -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT /* * A 32-bit kernel might be running on a 64-bit processor. But * if we're on a 32-bit processor and an i-cache incoherency @@ -320,7 +320,7 @@ static inline int emulate_load_store_insn(struct pt_regs *regs, *newvalue = value; *regptr = ®s->regs[insn.i_format.rt]; break; -#endif /* CONFIG_MIPS64 */ +#endif /* CONFIG_64BIT */ /* Cannot handle 64-bit instructions in 32-bit kernel */ goto sigill; @@ -392,7 +392,7 @@ static inline int emulate_load_store_insn(struct pt_regs *regs, break; case sd_op: -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT /* * A 32-bit kernel might be running on a 64-bit processor. But * if we're on a 32-bit processor and an i-cache incoherency @@ -428,7 +428,7 @@ static inline int emulate_load_store_insn(struct pt_regs *regs, if (res) goto fault; break; -#endif /* CONFIG_MIPS64 */ +#endif /* CONFIG_64BIT */ /* Cannot handle 64-bit instructions in 32-bit kernel */ goto sigill; diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index e830d788c106..482ac310c937 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -15,7 +15,7 @@ SECTIONS /* This is the value for an Origin kernel, taken from an IRIX kernel. */ /* . = 0xc00000000001c000; */ - /* Set the vaddr for the text segment to a value + /* Set the vaddr for the text segment to a value >= 0xa800 0000 0001 9000 if no symmon is going to configured >= 0xa800 0000 0030 0000 otherwise */ diff --git a/arch/mips/lasat/at93c.c b/arch/mips/lasat/at93c.c index f6add041ebec..ca26e554615e 100644 --- a/arch/mips/lasat/at93c.c +++ b/arch/mips/lasat/at93c.c @@ -1,7 +1,7 @@ -/* +/* * Atmel AT93C46 serial eeprom driver * - * Brian Murphy <brian.murphy@eicon.com> + * Brian Murphy <brian.murphy@eicon.com> * */ #include <linux/kernel.h> @@ -21,12 +21,12 @@ struct at93c_defs *at93c; -static void at93c_reg_write(u32 val) +static void at93c_reg_write(u32 val) { *at93c->reg = val; } -static u32 at93c_reg_read(void) +static u32 at93c_reg_read(void) { u32 tmp = *at93c->reg; return tmp; @@ -81,7 +81,7 @@ static u8 at93c_read_byte(void) } static void at93c_write_bits(u32 data, int size) -{ +{ int i; int shift = size - 1; u32 mask = (1 << shift); @@ -90,7 +90,7 @@ static void at93c_write_bits(u32 data, int size) at93c_write_databit((data & mask) >> shift); data <<= 1; } -} +} static void at93c_init_op(void) { @@ -104,8 +104,8 @@ static void at93c_end_op(void) lasat_ndelay(250); } -static void at93c_wait(void) -{ +static void at93c_wait(void) +{ at93c_init_op(); while (!at93c_read_databit()) ; diff --git a/arch/mips/lasat/at93c.h b/arch/mips/lasat/at93c.h index a912ac2171b0..cfe2f99b1d44 100644 --- a/arch/mips/lasat/at93c.h +++ b/arch/mips/lasat/at93c.h @@ -1,7 +1,7 @@ -/* +/* * Atmel AT93C46 serial eeprom driver * - * Brian Murphy <brian.murphy@eicon.com> + * Brian Murphy <brian.murphy@eicon.com> * */ diff --git a/arch/mips/lasat/ds1603.c b/arch/mips/lasat/ds1603.c index 7bbf6cf923c9..9d7812e03dcd 100644 --- a/arch/mips/lasat/ds1603.c +++ b/arch/mips/lasat/ds1603.c @@ -1,7 +1,7 @@ -/* - * Dallas Semiconductors 1603 RTC driver +/* + * Dallas Semiconductors 1603 RTC driver * - * Brian Murphy <brian@murphy.dk> + * Brian Murphy <brian@murphy.dk> * */ #include <linux/kernel.h> @@ -20,12 +20,12 @@ struct ds_defs *ds1603 = NULL; /* HW specific register functions */ -static void rtc_reg_write(unsigned long val) +static void rtc_reg_write(unsigned long val) { *ds1603->reg = val; } -static unsigned long rtc_reg_read(void) +static unsigned long rtc_reg_read(void) { unsigned long tmp = *ds1603->reg; return tmp; @@ -80,7 +80,7 @@ static unsigned int rtc_read_databit(void) { unsigned int data; - data = (rtc_datareg_read() & (1 << ds1603->data_read_shift)) + data = (rtc_datareg_read() & (1 << ds1603->data_read_shift)) >> ds1603->data_read_shift; rtc_cycle_clock(rtc_reg_read()); return data; diff --git a/arch/mips/lasat/ds1603.h b/arch/mips/lasat/ds1603.h index 55f3b0423c20..c2e5c76a379d 100644 --- a/arch/mips/lasat/ds1603.h +++ b/arch/mips/lasat/ds1603.h @@ -1,7 +1,7 @@ -/* - * Dallas Semiconductors 1603 RTC driver +/* + * Dallas Semiconductors 1603 RTC driver * - * Brian Murphy <brian@murphy.dk> + * Brian Murphy <brian@murphy.dk> * */ #ifndef __DS1603_H diff --git a/arch/mips/lasat/image/Makefile b/arch/mips/lasat/image/Makefile index 18b6430f11be..35ecd6483ef6 100644 --- a/arch/mips/lasat/image/Makefile +++ b/arch/mips/lasat/image/Makefile @@ -21,7 +21,7 @@ LDSCRIPT= -L$(obj) -Tromscript.normal HEAD_DEFINES := -D_kernel_start=0x$(KERNEL_START) \ -D_kernel_entry=0x$(KERNEL_ENTRY) \ -D VERSION="\"$(Version)\"" \ - -D TIMESTAMP=$(shell date +%s) + -D TIMESTAMP=$(shell date +%s) $(obj)/head.o: $(obj)/head.S $(KERNEL_IMAGE) $(CC) -fno-pic $(HEAD_DEFINES) -I$(TOPDIR)/include -c -o $@ $< diff --git a/arch/mips/lasat/image/head.S b/arch/mips/lasat/image/head.S index 426bd7de17bb..efb95f2609c2 100644 --- a/arch/mips/lasat/image/head.S +++ b/arch/mips/lasat/image/head.S @@ -27,5 +27,5 @@ reldate: .word TIMESTAMP .org 0x50 -release: +release: .string VERSION diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c index 1148a2d20aa7..c90da1639440 100644 --- a/arch/mips/lasat/interrupt.c +++ b/arch/mips/lasat/interrupt.c @@ -15,7 +15,7 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. * - * Routines for generic manipulation of the interrupts found on the + * Routines for generic manipulation of the interrupts found on the * Lasat boards. */ #include <linux/init.h> @@ -101,7 +101,7 @@ static unsigned long get_int_status_100(void) return *lasat_int_status & *lasat_int_mask; } -static unsigned long get_int_status_200(void) +static unsigned long get_int_status_200(void) { unsigned long int_status; diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c index 8c784bcf1111..fc9b0e2a6be1 100644 --- a/arch/mips/lasat/lasat_board.c +++ b/arch/mips/lasat/lasat_board.c @@ -67,7 +67,7 @@ static void init_flash_sizes(void) if (mips_machtype == MACH_LASAT_100) { lasat_board_info.li_flash_base = 0x1e000000; - + lb[LASAT_MTD_BOOTLOADER] = 0x1e400000; if (lasat_board_info.li_flash_size > 0x200000) { @@ -103,7 +103,7 @@ int lasat_init_board_info(void) memset(&lasat_board_info, 0, sizeof(lasat_board_info)); /* First read the EEPROM info */ - EEPROMRead(0, (unsigned char *)&lasat_board_info.li_eeprom_info, + EEPROMRead(0, (unsigned char *)&lasat_board_info.li_eeprom_info, sizeof(struct lasat_eeprom_struct)); /* Check the CRC */ @@ -188,7 +188,7 @@ int lasat_init_board_info(void) case 0x1: lasat_board_info.li_cpu_hz = lasat_board_info.li_bus_hz + - (lasat_board_info.li_bus_hz >> 1); + (lasat_board_info.li_bus_hz >> 1); break; case 0x2: lasat_board_info.li_cpu_hz = @@ -271,7 +271,7 @@ void lasat_write_eeprom_info(void) lasat_board_info.li_eeprom_info.crc32 = crc; /* Write the EEPROM info */ - EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info, + EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info, sizeof(struct lasat_eeprom_struct)); } diff --git a/arch/mips/lasat/picvue.c b/arch/mips/lasat/picvue.c index 5637cd153926..9ae82c3ffb07 100644 --- a/arch/mips/lasat/picvue.c +++ b/arch/mips/lasat/picvue.c @@ -1,7 +1,7 @@ -/* +/* * Picvue PVC160206 display driver * - * Brian Murphy <brian@murphy.dk> + * Brian Murphy <brian@murphy.dk> * */ #include <linux/kernel.h> @@ -24,12 +24,12 @@ struct pvc_defs *picvue = NULL; DECLARE_MUTEX(pvc_sem); -static void pvc_reg_write(u32 val) +static void pvc_reg_write(u32 val) { *picvue->reg = val; } -static u32 pvc_reg_read(void) +static u32 pvc_reg_read(void) { u32 tmp = *picvue->reg; return tmp; @@ -65,12 +65,12 @@ static u8 pvc_read_data(void) { u32 data = pvc_reg_read(); u8 byte; - data |= picvue->rw; + data |= picvue->rw; data &= ~picvue->rs; pvc_reg_write(data); ndelay(40); byte = pvc_read_byte(data); - data |= picvue->rs; + data |= picvue->rs; pvc_reg_write(data); return byte; } diff --git a/arch/mips/lasat/picvue.h b/arch/mips/lasat/picvue.h index 74a39039135d..2a96bf971897 100644 --- a/arch/mips/lasat/picvue.h +++ b/arch/mips/lasat/picvue.h @@ -1,7 +1,7 @@ -/* +/* * Picvue PVC160206 display driver * - * Brian Murphy <brian.murphy@eicon.com> + * Brian Murphy <brian.murphy@eicon.com> * */ #include <asm/semaphore.h> diff --git a/arch/mips/lasat/picvue_proc.c b/arch/mips/lasat/picvue_proc.c index eaa2b4625124..cce7cddcdb08 100644 --- a/arch/mips/lasat/picvue_proc.c +++ b/arch/mips/lasat/picvue_proc.c @@ -1,7 +1,7 @@ -/* +/* * Picvue PVC160206 display driver * - * Brian Murphy <brian.murphy@eicon.com> + * Brian Murphy <brian.murphy@eicon.com> * */ #include <linux/kernel.h> @@ -51,10 +51,10 @@ static int pvc_proc_read_line(char *page, char **start, page += sprintf(page, "%s\n", pvc_lines[lineno]); up(&pvc_sem); - return page - origpage; + return page - origpage; } -static int pvc_proc_write_line(struct file *file, const char *buffer, +static int pvc_proc_write_line(struct file *file, const char *buffer, unsigned long count, void *data) { int origcount = count; @@ -119,7 +119,7 @@ static int pvc_proc_read_scroll(char *page, char **start, page += sprintf(page, "%d\n", scroll_dir * scroll_interval); up(&pvc_sem); - return page - origpage; + return page - origpage; } diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c index ca62881c9e52..88c7ab871ec4 100644 --- a/arch/mips/lasat/prom.c +++ b/arch/mips/lasat/prom.c @@ -42,7 +42,7 @@ static void null_prom_putc(char c) /* these are functions provided by the bootloader */ static void (* prom_putc)(char c) = null_prom_putc; void (* prom_printf)(const char * fmt, ...) = null_prom_printf; -void (* prom_display)(const char *string, int pos, int clear) = +void (* prom_display)(const char *string, int pos, int clear) = null_prom_display; void (* prom_monitor)(void) = null_prom_monitor; diff --git a/arch/mips/lasat/reset.c b/arch/mips/lasat/reset.c index 37e4912ee1c8..8d7d7a454f9a 100644 --- a/arch/mips/lasat/reset.c +++ b/arch/mips/lasat/reset.c @@ -1,4 +1,4 @@ -/* +/* * Thomas Horsten <thh@lasat.com> * Copyright (C) 2000 LASAT Networks A/S. * diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c index e371ed5cbe34..f2604fab9a99 100644 --- a/arch/mips/lasat/setup.c +++ b/arch/mips/lasat/setup.c @@ -105,7 +105,7 @@ static int lasat_panic_prom_monitor(struct notifier_block *this, return NOTIFY_DONE; } -static struct notifier_block lasat_panic_block[] = +static struct notifier_block lasat_panic_block[] = { { lasat_panic_display, NULL, INT_MAX }, { lasat_panic_prom_monitor, NULL, INT_MIN } @@ -120,7 +120,7 @@ static void lasat_timer_setup(struct irqaction *irq) { write_c0_compare( - read_c0_count() + + read_c0_count() + mips_hpt_frequency / HZ); change_c0_status(ST0_IM, IE_IRQ0 | IE_IRQ5); } diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c index 1c0cc620a43f..8ff43a1c1e99 100644 --- a/arch/mips/lasat/sysctl.c +++ b/arch/mips/lasat/sysctl.c @@ -37,14 +37,14 @@ static DECLARE_MUTEX(lasat_info_sem); -/* Strategy function to write EEPROM after changing string entry */ +/* Strategy function to write EEPROM after changing string entry */ int sysctl_lasatstring(ctl_table *table, int *name, int nlen, void *oldval, size_t *oldlenp, void *newval, size_t newlen, void **context) { int r; down(&lasat_info_sem); - r = sysctl_string(table, name, + r = sysctl_string(table, name, nlen, oldval, oldlenp, newval, newlen, context); if (r < 0) { up(&lasat_info_sem); @@ -74,7 +74,7 @@ int proc_dolasatstring(ctl_table *table, int write, struct file *filp, return 0; } -/* proc function to write EEPROM after changing int entry */ +/* proc function to write EEPROM after changing int entry */ int proc_dolasatint(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { @@ -93,7 +93,7 @@ int proc_dolasatint(ctl_table *table, int write, struct file *filp, static int rtctmp; #ifdef CONFIG_DS1603 -/* proc function to read/write RealTime Clock */ +/* proc function to read/write RealTime Clock */ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { @@ -165,9 +165,9 @@ static char lasat_bcastaddr[16]; void update_bcastaddr(void) { unsigned int ip; - - ip = (lasat_board_info.li_eeprom_info.ipaddr & - lasat_board_info.li_eeprom_info.netmask) | + + ip = (lasat_board_info.li_eeprom_info.ipaddr & + lasat_board_info.li_eeprom_info.netmask) | ~lasat_board_info.li_eeprom_info.netmask; sprintf(lasat_bcastaddr, "%d.%d.%d.%d", @@ -205,7 +205,7 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp, break; len++; } - if (len >= sizeof(proc_lasat_ipbuf)-1) + if (len >= sizeof(proc_lasat_ipbuf)-1) len = sizeof(proc_lasat_ipbuf) - 1; if (copy_from_user(proc_lasat_ipbuf, buffer, len)) { @@ -249,8 +249,8 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp, } #endif /* defined(CONFIG_INET) */ -static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen, - void *oldval, size_t *oldlenp, +static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen, + void *oldval, size_t *oldlenp, void *newval, size_t newlen, void **context) { @@ -293,7 +293,7 @@ int proc_lasat_eeprom_value(ctl_table *table, int write, struct file *filp, if (!strcmp(filp->f_dentry->d_name.name, "debugaccess")) lasat_board_info.li_eeprom_info.debugaccess = lasat_board_info.li_debugaccess; } - lasat_write_eeprom_info(); + lasat_write_eeprom_info(); up(&lasat_info_sem); return 0; } @@ -316,8 +316,8 @@ static ctl_table lasat_table[] = { 0644, NULL, &proc_lasat_ip, &sysctl_lasat_intvec}, {LASAT_NETMASK, "netmask", &lasat_board_info.li_eeprom_info.netmask, sizeof(int), 0644, NULL, &proc_lasat_ip, &sysctl_lasat_intvec}, - {LASAT_BCAST, "bcastaddr", &lasat_bcastaddr, - sizeof(lasat_bcastaddr), 0600, NULL, + {LASAT_BCAST, "bcastaddr", &lasat_bcastaddr, + sizeof(lasat_bcastaddr), 0600, NULL, &proc_dostring, &sysctl_string}, #endif {LASAT_PASSWORD, "passwd_hash", &lasat_board_info.li_eeprom_info.passwd_hash, sizeof(lasat_board_info.li_eeprom_info.passwd_hash), diff --git a/arch/mips/lib-32/Makefile b/arch/mips/lib-32/Makefile index fd6a2bafdfcf..ad285786e74b 100644 --- a/arch/mips/lib-32/Makefile +++ b/arch/mips/lib-32/Makefile @@ -2,7 +2,7 @@ # Makefile for MIPS-specific library files.. # -lib-y += csum_partial.o memset.o watch.o +lib-y += csum_partial.o memset.o watch.o obj-$(CONFIG_CPU_MIPS32) += dump_tlb.o obj-$(CONFIG_CPU_MIPS64) += dump_tlb.o diff --git a/arch/mips/lib-32/memset.S b/arch/mips/lib-32/memset.S index ad9ff4071ce9..1981485bd48b 100644 --- a/arch/mips/lib-32/memset.S +++ b/arch/mips/lib-32/memset.S @@ -7,7 +7,7 @@ * Copyright (C) 1999, 2000 Silicon Graphics, Inc. */ #include <asm/asm.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> #include <asm/regdef.h> #define EX(insn,reg,addr,handler) \ diff --git a/arch/mips/lib-64/Makefile b/arch/mips/lib-64/Makefile index fd6a2bafdfcf..ad285786e74b 100644 --- a/arch/mips/lib-64/Makefile +++ b/arch/mips/lib-64/Makefile @@ -2,7 +2,7 @@ # Makefile for MIPS-specific library files.. # -lib-y += csum_partial.o memset.o watch.o +lib-y += csum_partial.o memset.o watch.o obj-$(CONFIG_CPU_MIPS32) += dump_tlb.o obj-$(CONFIG_CPU_MIPS64) += dump_tlb.o diff --git a/arch/mips/lib-64/memset.S b/arch/mips/lib-64/memset.S index 242f1976cfaf..e2c42c85113b 100644 --- a/arch/mips/lib-64/memset.S +++ b/arch/mips/lib-64/memset.S @@ -7,7 +7,7 @@ * Copyright (C) 1999, 2000 Silicon Graphics, Inc. */ #include <asm/asm.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> #include <asm/regdef.h> #define EX(insn,reg,addr,handler) \ diff --git a/arch/mips/lib/dec_and_lock.c b/arch/mips/lib/dec_and_lock.c index e44e9579bd36..fd82c84a93b7 100644 --- a/arch/mips/lib/dec_and_lock.c +++ b/arch/mips/lib/dec_and_lock.c @@ -20,14 +20,7 @@ * has a cmpxchg, and where atomic->value is an int holding * the value of the atomic (i.e. the high bits aren't used * for a lock or anything like that). - * - * N.B. ATOMIC_DEC_AND_LOCK gets defined in include/linux/spinlock.h - * if spinlocks are empty and thus atomic_dec_and_lock is defined - * to be atomic_dec_and_test - in that case we don't need it - * defined here as well. */ - -#ifndef ATOMIC_DEC_AND_LOCK int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock) { int counter; @@ -52,4 +45,3 @@ int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock) } EXPORT_SYMBOL(_atomic_dec_and_lock); -#endif /* ATOMIC_DEC_AND_LOCK */ diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S index afa8eae18ff6..a78865f76547 100644 --- a/arch/mips/lib/memcpy.S +++ b/arch/mips/lib/memcpy.S @@ -14,7 +14,7 @@ */ #include <linux/config.h> #include <asm/asm.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> #include <asm/regdef.h> #define dst a0 @@ -79,7 +79,7 @@ /* * Only on the 64-bit kernel we can made use of 64-bit registers. */ -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT #define USE_DOUBLE #endif @@ -101,7 +101,7 @@ #define NBYTES 8 #define LOG_NBYTES 3 -/* +/* * As we are sharing code base with the mips32 tree (which use the o32 ABI * register definitions). We need to redefine the register definitions from * the n64 ABI register naming to the o32 ABI register naming. @@ -118,7 +118,7 @@ #define t5 $13 #define t6 $14 #define t7 $15 - + #else #define LOAD lw diff --git a/arch/mips/lib/strlen_user.S b/arch/mips/lib/strlen_user.S index 07660e86c99d..eca558d83a37 100644 --- a/arch/mips/lib/strlen_user.S +++ b/arch/mips/lib/strlen_user.S @@ -7,7 +7,7 @@ * Copyright (c) 1999 Silicon Graphics, Inc. */ #include <asm/asm.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> #include <asm/regdef.h> #define EX(insn,reg,addr,handler) \ diff --git a/arch/mips/lib/strncpy_user.S b/arch/mips/lib/strncpy_user.S index 14bed17c1648..d16c76fbfac7 100644 --- a/arch/mips/lib/strncpy_user.S +++ b/arch/mips/lib/strncpy_user.S @@ -7,7 +7,7 @@ */ #include <linux/errno.h> #include <asm/asm.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> #include <asm/regdef.h> #define EX(insn,reg,addr,handler) \ diff --git a/arch/mips/lib/strnlen_user.S b/arch/mips/lib/strnlen_user.S index 6e7a8eed4de8..c0ea15194a0e 100644 --- a/arch/mips/lib/strnlen_user.S +++ b/arch/mips/lib/strnlen_user.S @@ -7,7 +7,7 @@ * Copyright (c) 1999 Silicon Graphics, Inc. */ #include <asm/asm.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> #include <asm/regdef.h> #define EX(insn,reg,addr,handler) \ diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index 20a552be02ee..99c550632d44 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -320,7 +320,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx) case cop1_op: switch (MIPSInst_RS(ir)) { -#if __mips64 && !defined(SINGLE_ONLY_FPU) +#if defined(__mips64) && !defined(SINGLE_ONLY_FPU) case dmfc_op: /* copregister fs -> gpr[rt] */ if (MIPSInst_RT(ir) != 0) { @@ -805,7 +805,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx, ieee754dp d; ieee754sp s; int w; -#if __mips64 +#ifdef __mips64 s64 l; #endif } rv; /* resulting value */ @@ -950,7 +950,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx, } #endif /* __mips >= 2 */ -#if __mips64 && !defined(SINGLE_ONLY_FPU) +#if defined(__mips64) && !defined(SINGLE_ONLY_FPU) case fcvtl_op:{ ieee754sp fs; @@ -1125,7 +1125,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx, } #endif -#if __mips64 && !defined(SINGLE_ONLY_FPU) +#if defined(__mips64) && !defined(SINGLE_ONLY_FPU) case fcvtl_op:{ ieee754dp fs; @@ -1203,7 +1203,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx, break; } -#if __mips64 && !defined(SINGLE_ONLY_FPU) +#if defined(__mips64) && !defined(SINGLE_ONLY_FPU) case l_fmt:{ switch (MIPSInst_FUNC(ir)) { case fcvts_op: @@ -1267,7 +1267,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx, case w_fmt: SITOREG(rv.w, MIPSInst_FD(ir)); break; -#if __mips64 && !defined(SINGLE_ONLY_FPU) +#if defined(__mips64) && !defined(SINGLE_ONLY_FPU) case l_fmt: DITOREG(rv.l, MIPSInst_FD(ir)); break; diff --git a/arch/mips/math-emu/kernel_linkage.c b/arch/mips/math-emu/kernel_linkage.c index 04397fec30fc..4002f0cf79f3 100644 --- a/arch/mips/math-emu/kernel_linkage.c +++ b/arch/mips/math-emu/kernel_linkage.c @@ -86,7 +86,7 @@ int fpu_emulator_restore_context(struct sigcontext *sc) return err; } -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT /* * This is the o32 version */ diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c index 8f1d875217a2..19d4b0792460 100644 --- a/arch/mips/mips-boards/atlas/atlas_int.c +++ b/arch/mips/mips-boards/atlas/atlas_int.c @@ -122,7 +122,7 @@ void __init arch_init_irq(void) int i; atlas_hw0_icregs = (struct atlas_ictrl_regs *)ioremap (ATLAS_ICTRL_REGS_BASE, sizeof(struct atlas_ictrl_regs *)); - + /* * Mask out all interrupt by writing "1" to all bit position in * the interrupt reset reg. diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c index 31caf0603a3f..311155d1d3ed 100644 --- a/arch/mips/mips-boards/generic/init.c +++ b/arch/mips/mips-boards/generic/init.c @@ -200,7 +200,7 @@ void __init kgdb_config (void) generic_putDebugChar = saa9730_putDebugChar; generic_getDebugChar = saa9730_getDebugChar; } - else + else #endif { speed = rs_kgdb_hook(line, speed); @@ -243,7 +243,7 @@ void __init prom_init(void) mips_revision_corid = MIPS_REVISION_CORID; if (mips_revision_corid == MIPS_REVISION_CORID_CORE_EMUL) { - if (BONITO_PCIDID == 0x0001df53 || + if (BONITO_PCIDID == 0x0001df53 || BONITO_PCIDID == 0x0003df53) mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_BON; else @@ -310,7 +310,7 @@ void __init prom_init(void) case MIPS_REVISION_CORID_CORE_MSC: case MIPS_REVISION_CORID_CORE_FPGA2: case MIPS_REVISION_CORID_CORE_EMUL_MSC: - _pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000); + _pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000); #ifdef CONFIG_CPU_LITTLE_ENDIAN MSC_WRITE(MSC01_PCI_SWAP, MSC01_PCI_SWAP_NOSWAP); diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index fe7fc17305a6..16315444dd5a 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -89,7 +89,7 @@ static unsigned int __init estimate_cpu_frequency(void) * really calculate the timer frequency * For now we hardwire the SEAD board frequency to 12MHz. */ - + if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) || (prid == (PRID_COMP_MIPS | PRID_IMP_25KF))) count = 12000000; diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c index 3377e66de9eb..df6db6419ae9 100644 --- a/arch/mips/mips-boards/malta/malta_setup.c +++ b/arch/mips/mips-boards/malta/malta_setup.c @@ -149,15 +149,15 @@ static int __init malta_setup(void) argptr = prom_getcmdline(); if (strstr(argptr, "iobcuncached")) { BONITO_PCICACHECTRL &= ~BONITO_PCICACHECTRL_IOBCCOH_EN; - BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG & + BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG & ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); printk("Disabled Bonito IOBC coherency\n"); } else { BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_IOBCCOH_EN; - BONITO_PCIMEMBASECFG |= - (BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | + BONITO_PCIMEMBASECFG |= + (BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); printk("Disabled Bonito IOBC coherency\n"); } diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index f61e038b4440..b56a0abdc3d4 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -5,8 +5,8 @@ obj-y += cache.o extable.o fault.o init.o pgtable.o \ tlbex.o tlbex-fault.o -obj-$(CONFIG_MIPS32) += ioremap.o pgtable-32.o -obj-$(CONFIG_MIPS64) += pgtable-64.o +obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o +obj-$(CONFIG_64BIT) += pgtable-64.o obj-$(CONFIG_HIGHMEM) += highmem.o obj-$(CONFIG_CPU_MIPS32) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index a03ebb2cba67..5ea84bc98c6a 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -126,13 +126,13 @@ static inline void tx49_blast_icache32(void) CACHE32_UNROLL32_ALIGN2; /* I'm in even chunk. blast odd chunks */ - for (ws = 0; ws < ws_end; ws += ws_inc) - for (addr = start + 0x400; addr < end; addr += 0x400 * 2) + for (ws = 0; ws < ws_end; ws += ws_inc) + for (addr = start + 0x400; addr < end; addr += 0x400 * 2) cache32_unroll32(addr|ws,Index_Invalidate_I); CACHE32_UNROLL32_ALIGN; /* I'm in odd chunk. blast even chunks */ - for (ws = 0; ws < ws_end; ws += ws_inc) - for (addr = start; addr < end; addr += 0x400 * 2) + for (ws = 0; ws < ws_end; ws += ws_inc) + for (addr = start; addr < end; addr += 0x400 * 2) cache32_unroll32(addr|ws,Index_Invalidate_I); } @@ -156,13 +156,13 @@ static inline void tx49_blast_icache32_page_indexed(unsigned long page) CACHE32_UNROLL32_ALIGN2; /* I'm in even chunk. blast odd chunks */ - for (ws = 0; ws < ws_end; ws += ws_inc) - for (addr = start + 0x400; addr < end; addr += 0x400 * 2) + for (ws = 0; ws < ws_end; ws += ws_inc) + for (addr = start + 0x400; addr < end; addr += 0x400 * 2) cache32_unroll32(addr|ws,Index_Invalidate_I); CACHE32_UNROLL32_ALIGN; /* I'm in odd chunk. blast even chunks */ - for (ws = 0; ws < ws_end; ws += ws_inc) - for (addr = start; addr < end; addr += 0x400 * 2) + for (ws = 0; ws < ws_end; ws += ws_inc) + for (addr = start; addr < end; addr += 0x400 * 2) cache32_unroll32(addr|ws,Index_Invalidate_I); } @@ -723,10 +723,10 @@ static void local_r4k_flush_cache_sigtramp(void * arg) ".set push\n\t" ".set noat\n\t" ".set mips3\n\t" -#ifdef CONFIG_MIPS32 +#ifdef CONFIG_32BIT "la $at,1f\n\t" #endif -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT "dla $at,1f\n\t" #endif "cache %0,($at)\n\t" diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c index ab30afd63b32..502f68c664b2 100644 --- a/arch/mips/mm/c-sb1.c +++ b/arch/mips/mm/c-sb1.c @@ -270,7 +270,7 @@ static void local_sb1_flush_icache_range(unsigned long start, __sb1_writeback_inv_dcache_all(); else __sb1_writeback_inv_dcache_range(start, end); - + /* Just flush the whole icache if the range is big enough */ if ((end - start) > icache_range_cutoff) __sb1_flush_icache_all(); diff --git a/arch/mips/mm/cerr-sb1.c b/arch/mips/mm/cerr-sb1.c index 13d96d62764e..7166ffe63502 100644 --- a/arch/mips/mm/cerr-sb1.c +++ b/arch/mips/mm/cerr-sb1.c @@ -25,7 +25,7 @@ #include <asm/sibyte/sb1250_regs.h> #include <asm/sibyte/sb1250_scd.h> #endif - + /* SB1 definitions */ /* XXX should come from config1 XXX */ @@ -136,14 +136,14 @@ static inline void breakout_cerrd(unsigned int val) #ifndef CONFIG_SIBYTE_BUS_WATCHER -static void check_bus_watcher(void) -{ +static void check_bus_watcher(void) +{ uint32_t status, l2_err, memio_err; /* Destructive read, clears register and interrupt */ status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS)); /* Bit 31 is always on, but there's no #define for that */ - if (status & ~(1UL << 31)) { + if (status & ~(1UL << 31)) { l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS)); memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS)); prom_printf("Bus watcher error counters: %08x %08x\n", l2_err, memio_err); @@ -153,14 +153,14 @@ static void check_bus_watcher(void) (int)(G_SCD_BERR_TID(status) >> 6), (int)G_SCD_BERR_RID(status), (int)G_SCD_BERR_DCODE(status)); - } else { - prom_printf("Bus watcher indicates no error\n"); - } -} -#else -extern void check_bus_watcher(void); -#endif - + } else { + prom_printf("Bus watcher indicates no error\n"); + } +} +#else +extern void check_bus_watcher(void); +#endif + asmlinkage void sb1_cache_error(void) { uint64_t cerr_dpa; diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c index 9895e32b0fce..59e54f12212e 100644 --- a/arch/mips/mm/dma-noncoherent.c +++ b/arch/mips/mm/dma-noncoherent.c @@ -162,7 +162,7 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, for (i = 0; i < nents; i++, sg++) { unsigned long addr; - + addr = (unsigned long) page_address(sg->page); if (addr) __dma_sync(addr + sg->offset, sg->length, direction); @@ -230,9 +230,9 @@ void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { unsigned long addr; - + BUG_ON(direction == DMA_NONE); - + addr = dma_handle + PAGE_OFFSET; __dma_sync(addr, size, direction); } @@ -282,9 +282,9 @@ void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, enum dma_data_direction direction) { int i; - + BUG_ON(direction == DMA_NONE); - + /* Make sure that gcc doesn't leave the empty loop body. */ for (i = 0; i < nelems; i++, sg++) __dma_sync((unsigned long)page_address(sg->page), diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 9c9a271c8a3a..dc6830b10fab 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -96,7 +96,7 @@ static void __init kmap_init(void) kmap_prot = PAGE_KERNEL; } -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT static void __init fixrange_init(unsigned long start, unsigned long end, pgd_t *pgd_base) { @@ -125,7 +125,7 @@ static void __init fixrange_init(unsigned long start, unsigned long end, j = 0; } } -#endif /* CONFIG_MIPS64 */ +#endif /* CONFIG_64BIT */ #endif /* CONFIG_HIGHMEM */ #ifndef CONFIG_NEED_MULTIPLE_NODES @@ -258,7 +258,7 @@ void __init mem_init(void) #ifdef CONFIG_BLK_DEV_INITRD void free_initrd_mem(unsigned long start, unsigned long end) { -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT /* Switch from KSEG0 to XKPHYS addresses */ start = (unsigned long)phys_to_virt(CPHYSADDR(start)); end = (unsigned long)phys_to_virt(CPHYSADDR(end)); @@ -286,7 +286,7 @@ void free_initmem(void) addr = (unsigned long) &__init_begin; while (addr < (unsigned long) &__init_end) { -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT page = PAGE_OFFSET | CPHYSADDR(addr); #else page = addr; diff --git a/arch/mips/mm/pg-sb1.c b/arch/mips/mm/pg-sb1.c index 59d131b5e536..1b6df7133c1e 100644 --- a/arch/mips/mm/pg-sb1.c +++ b/arch/mips/mm/pg-sb1.c @@ -114,7 +114,7 @@ static inline void copy_page_cpu(void *to, void *from) " pref " SB1_PREF_STORE_STREAMED_HINT ", -64(%1)\n" " pref " SB1_PREF_LOAD_STREAMED_HINT ", -32(%0)\n" "1: pref " SB1_PREF_STORE_STREAMED_HINT ", -32(%1)\n" -# ifdef CONFIG_MIPS64 +# ifdef CONFIG_64BIT " ld $8, -128(%0) \n" /* Block copy a cacheline */ " ld $9, -120(%0) \n" " ld $10, -112(%0) \n" @@ -148,7 +148,7 @@ static inline void copy_page_cpu(void *to, void *from) " daddiu %0, %0, -128 \n" " daddiu %1, %1, -128 \n" #endif -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT " ld $8, 0(%0) \n" /* Block copy a cacheline */ "1: ld $9, 8(%0) \n" " ld $10, 16(%0) \n" @@ -178,7 +178,7 @@ static inline void copy_page_cpu(void *to, void *from) " daddiu %0, %0, 32 \n" " daddiu %1, %1, 32 \n" " bnel %0, %2, 1b \n" -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT " ld $8, 0(%0) \n" #else " lw $2, 0(%0) \n" @@ -186,7 +186,7 @@ static inline void copy_page_cpu(void *to, void *from) " .set pop \n" : "+r" (src), "+r" (dst) : "r" (end) -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT : "$8","$9","$10","$11","memory"); #else : "$2","$3","$6","$7","$8","$9","$10","$11","memory"); @@ -198,7 +198,7 @@ static inline void copy_page_cpu(void *to, void *from) /* * Pad descriptors to cacheline, since each is exclusively owned by a - * particular CPU. + * particular CPU. */ typedef struct dmadscr_s { u64 dscr_a; diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 87e229f4d3d5..6569be3983c7 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -448,7 +448,7 @@ L_LA(_r3000_write_probe_fail) L_LA(_r3000_write_probe_ok) /* convenience macros for instructions */ -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT # define i_LW(buf, rs, rt, off) i_ld(buf, rs, rt, off) # define i_SW(buf, rs, rt, off) i_sd(buf, rs, rt, off) # define i_SLL(buf, rs, rt, sh) i_dsll(buf, rs, rt, sh) @@ -486,7 +486,7 @@ L_LA(_r3000_write_probe_ok) #define i_ssnop(buf) i_sll(buf, 0, 0, 1) #define i_ehb(buf) i_sll(buf, 0, 0, 3) -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT static __init int __attribute__((unused)) in_compat_space_p(long addr) { /* Is this address in 32bit compat space? */ @@ -516,7 +516,7 @@ static __init int rel_lo(long val) static __init void i_LA_mostly(u32 **buf, unsigned int rs, long addr) { -#if CONFIG_MIPS64 +#ifdef CONFIG_64BIT if (!in_compat_space_p(addr)) { i_lui(buf, rs, rel_highest(addr)); if (rel_higher(addr)) @@ -682,7 +682,7 @@ static void il_bgezl(u32 **p, struct reloc **r, unsigned int reg, #define C0_EPC 14 #define C0_XCONTEXT 20 -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT # define GET_CONTEXT(buf, reg) i_MFC0(buf, reg, C0_XCONTEXT) #else # define GET_CONTEXT(buf, reg) i_MFC0(buf, reg, C0_CONTEXT) @@ -923,7 +923,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l, } } -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT /* * TMP and PTR are scratch. * TMP will be clobbered, PTR will hold the pmd entry. @@ -1010,7 +1010,7 @@ build_get_pgd_vmalloc64(u32 **p, struct label **l, struct reloc **r, } } -#else /* !CONFIG_MIPS64 */ +#else /* !CONFIG_64BIT */ /* * TMP and PTR are scratch. @@ -1038,7 +1038,7 @@ build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr) i_addu(p, ptr, ptr, tmp); /* add in pgd offset */ } -#endif /* !CONFIG_MIPS64 */ +#endif /* !CONFIG_64BIT */ static __init void build_adjust_context(u32 **p, unsigned int ctx) { @@ -1159,7 +1159,7 @@ static void __init build_r4000_tlb_refill_handler(void) /* No need for i_nop */ } -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */ #else build_get_pgde32(&p, K0, K1); /* get pgd in K1 */ @@ -1171,7 +1171,7 @@ static void __init build_r4000_tlb_refill_handler(void) l_leave(&l, p); i_eret(&p); /* return from trap */ -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT build_get_pgd_vmalloc64(&p, &l, &r, K0, K1); #endif @@ -1182,7 +1182,7 @@ static void __init build_r4000_tlb_refill_handler(void) * need three, with the the second nop'ed and the third being * unused. */ -#ifdef CONFIG_MIPS32 +#ifdef CONFIG_32BIT if ((p - tlb_handler) > 64) panic("TLB refill handler space exceeded"); #else @@ -1195,12 +1195,12 @@ static void __init build_r4000_tlb_refill_handler(void) /* * Now fold the handler in the TLB refill handler space. */ -#ifdef CONFIG_MIPS32 +#ifdef CONFIG_32BIT f = final_handler; /* Simplest case, just copy the handler. */ copy_handler(relocs, labels, tlb_handler, p, f); final_len = p - tlb_handler; -#else /* CONFIG_MIPS64 */ +#else /* CONFIG_64BIT */ f = final_handler + 32; if ((p - tlb_handler) <= 32) { /* Just copy the handler. */ @@ -1235,7 +1235,7 @@ static void __init build_r4000_tlb_refill_handler(void) copy_handler(relocs, labels, split, p, final_handler); final_len = (f - (final_handler + 32)) + (p - split); } -#endif /* CONFIG_MIPS64 */ +#endif /* CONFIG_64BIT */ resolve_relocs(relocs, labels); printk("Synthesized TLB refill handler (%u instructions).\n", @@ -1605,7 +1605,7 @@ build_r4000_tlbchange_handler_head(u32 **p, struct label **l, struct reloc **r, unsigned int pte, unsigned int ptr) { -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */ #else build_get_pgde32(p, pte, ptr); /* get pgd in ptr */ @@ -1636,7 +1636,7 @@ build_r4000_tlbchange_handler_tail(u32 **p, struct label **l, l_leave(l, *p); i_eret(p); /* return from trap */ -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT build_get_pgd_vmalloc64(p, l, r, tmp, ptr); #endif } diff --git a/arch/mips/momentum/jaguar_atx/int-handler.S b/arch/mips/momentum/jaguar_atx/int-handler.S index 43fd5a58077c..55bc789733f2 100644 --- a/arch/mips/momentum/jaguar_atx/int-handler.S +++ b/arch/mips/momentum/jaguar_atx/int-handler.S @@ -27,11 +27,11 @@ SAVE_ALL CLI .set at - mfc0 t0, CP0_CAUSE + mfc0 t0, CP0_CAUSE mfc0 t2, CP0_STATUS and t0, t2 - + andi t1, t0, STATUSF_IP0 /* sw0 software interrupt */ bnez t1, ll_sw0_irq andi t1, t0, STATUSF_IP1 /* sw1 software interrupt */ @@ -103,25 +103,25 @@ ll_pcia_irq: move a1, sp jal do_IRQ j ret_from_irq - + ll_pcib_irq: li a0, 5 move a1, sp jal do_IRQ j ret_from_irq - + ll_uart_irq: li a0, 6 move a1, sp jal do_IRQ j ret_from_irq - + ll_cputimer_irq: li a0, 7 move a1, sp jal ll_timer_interrupt j ret_from_irq - + ll_mv64340_decode_irq: move a0, sp jal ll_mv64340_irq diff --git a/arch/mips/momentum/jaguar_atx/prom.c b/arch/mips/momentum/jaguar_atx/prom.c index fa5982ac0ac6..14ae2e713585 100644 --- a/arch/mips/momentum/jaguar_atx/prom.c +++ b/arch/mips/momentum/jaguar_atx/prom.c @@ -64,7 +64,7 @@ static u8 exchange_bit(u8 val, u8 cs) /* turn the clock off and read-strobe */ JAGUAR_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE); - + /* return the data */ return ((JAGUAR_FPGA_READ(EEPROM_MODE) >> 3) & 0x1); } @@ -90,7 +90,7 @@ void get_mac(char dest[6]) } #endif -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT unsigned long signext(unsigned long addr) { @@ -143,7 +143,7 @@ char *arg64(unsigned long addrin, int arg_index) return p; } -#endif /* CONFIG_MIPS64 */ +#endif /* CONFIG_64BIT */ /* PMON passes arguments in C main() style */ void __init prom_init(void) @@ -158,7 +158,7 @@ void __init prom_init(void) // ja_setup_console(); /* The very first thing. */ #endif -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT char *ptr; printk("Mips64 Jaguar-ATX\n"); @@ -201,7 +201,7 @@ void __init prom_init(void) } printk("arcs_cmdline: %s\n", arcs_cmdline); -#else /* CONFIG_MIPS64 */ +#else /* CONFIG_64BIT */ /* save the PROM vectors for debugging use */ debug_vectors = cv; @@ -226,7 +226,7 @@ void __init prom_init(void) } env++; } -#endif /* CONFIG_MIPS64 */ +#endif /* CONFIG_64BIT */ mips_machgroup = MACH_GROUP_MOMENCO; mips_machtype = MACH_MOMENCO_JAGUAR_ATX; diff --git a/arch/mips/momentum/jaguar_atx/reset.c b/arch/mips/momentum/jaguar_atx/reset.c index 48039484cdf9..c4236b1e59fa 100644 --- a/arch/mips/momentum/jaguar_atx/reset.c +++ b/arch/mips/momentum/jaguar_atx/reset.c @@ -27,7 +27,7 @@ void momenco_jaguar_restart(char *command) { /* base address of timekeeper portion of part */ -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT void *nvram = (void*) 0xfffffffffc807000; #else void *nvram = (void*) 0xfc807000; diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c index 30462e715066..90288cf2b1e0 100644 --- a/arch/mips/momentum/jaguar_atx/setup.c +++ b/arch/mips/momentum/jaguar_atx/setup.c @@ -105,7 +105,7 @@ void __init bus_error_init(void) { /* nothing */ } static __init void wire_stupidity_into_tlb(void) { -#ifdef CONFIG_MIPS32 +#ifdef CONFIG_32BIT write_c0_wired(0); local_flush_tlb_all(); @@ -451,7 +451,7 @@ static int __init momenco_jaguar_atx_setup(void) #ifdef GEMDEBUG_TRACEBUFFER { unsigned int tbControl; - tbControl = + tbControl = 0 << 26 | /* post trigger delay 0 */ 0x2 << 16 | /* sequential trace mode */ // 0x0 << 16 | /* non-sequential trace mode */ diff --git a/arch/mips/momentum/ocelot_3/prom.c b/arch/mips/momentum/ocelot_3/prom.c index 89c17a0c0bed..c4fa9c525faa 100644 --- a/arch/mips/momentum/ocelot_3/prom.c +++ b/arch/mips/momentum/ocelot_3/prom.c @@ -93,7 +93,7 @@ void get_mac(char dest[6]) #endif -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT unsigned long signext(unsigned long addr) { @@ -145,7 +145,7 @@ char *arg64(unsigned long addrin, int arg_index) return p; } -#endif /* CONFIG_MIPS64 */ +#endif /* CONFIG_64BIT */ void __init prom_init(void) { @@ -155,7 +155,7 @@ void __init prom_init(void) struct callvectors *cv = (struct callvectors *) fw_arg3; int i; -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT char *ptr; printk("prom_init - MIPS64\n"); @@ -198,7 +198,7 @@ void __init prom_init(void) } printk("arcs_cmdline: %s\n", arcs_cmdline); -#else /* CONFIG_MIPS64 */ +#else /* CONFIG_64BIT */ /* save the PROM vectors for debugging use */ debug_vectors = cv; @@ -224,7 +224,7 @@ void __init prom_init(void) } env++; } -#endif /* CONFIG_MIPS64 */ +#endif /* CONFIG_64BIT */ mips_machgroup = MACH_GROUP_MOMENCO; mips_machtype = MACH_MOMENCO_OCELOT_3; @@ -234,7 +234,7 @@ void __init prom_init(void) get_mac(prom_mac_addr_base); #endif -#ifndef CONFIG_MIPS64 +#ifndef CONFIG_64BIT debug_vectors->printf("Booting Linux kernel...\n"); #endif } diff --git a/arch/mips/momentum/ocelot_c/int-handler.S b/arch/mips/momentum/ocelot_c/int-handler.S index 2f2430648abc..52349d9bf1be 100644 --- a/arch/mips/momentum/ocelot_c/int-handler.S +++ b/arch/mips/momentum/ocelot_c/int-handler.S @@ -27,11 +27,11 @@ SAVE_ALL CLI .set at - mfc0 t0, CP0_CAUSE + mfc0 t0, CP0_CAUSE mfc0 t2, CP0_STATUS and t0, t2 - + andi t1, t0, STATUSF_IP0 /* sw0 software interrupt */ bnez t1, ll_sw0_irq andi t1, t0, STATUSF_IP1 /* sw1 software interrupt */ @@ -83,7 +83,7 @@ ll_pmc_irq: move a1, sp jal do_IRQ j ret_from_irq - + ll_cpci_decode_irq: move a0, sp jal ll_cpci_irq @@ -99,4 +99,4 @@ ll_cputimer_irq: move a1, sp jal do_IRQ j ret_from_irq - + diff --git a/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h b/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h index a6cf7a7959b3..97fb77dad723 100644 --- a/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h +++ b/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h @@ -32,7 +32,7 @@ #include <linux/config.h> -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT #define OCELOT_C_CS0_ADDR (0xfffffffffc000000) #else #define OCELOT_C_CS0_ADDR (0xfc000000) diff --git a/arch/mips/momentum/ocelot_c/prom.c b/arch/mips/momentum/ocelot_c/prom.c index 49ac302d8901..5b6809724b15 100644 --- a/arch/mips/momentum/ocelot_c/prom.c +++ b/arch/mips/momentum/ocelot_c/prom.c @@ -67,7 +67,7 @@ static u8 exchange_bit(u8 val, u8 cs) /* turn the clock off and read-strobe */ OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE); - + /* return the data */ return ((OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1); } @@ -94,7 +94,7 @@ void get_mac(char dest[6]) #endif -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT unsigned long signext(unsigned long addr) { @@ -144,7 +144,7 @@ char *arg64(unsigned long addrin, int arg_index) p = (char *)get_arg(args, arg_index); return p; } -#endif /* CONFIG_MIPS64 */ +#endif /* CONFIG_64BIT */ void __init prom_init(void) @@ -155,7 +155,7 @@ void __init prom_init(void) struct callvectors *cv = (struct callvectors *) fw_arg3; int i; -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT char *ptr; printk("prom_init - MIPS64\n"); @@ -197,7 +197,7 @@ void __init prom_init(void) } printk("arcs_cmdline: %s\n", arcs_cmdline); -#else /* CONFIG_MIPS64 */ +#else /* CONFIG_64BIT */ /* save the PROM vectors for debugging use */ debug_vectors = cv; @@ -222,7 +222,7 @@ void __init prom_init(void) } env++; } -#endif /* CONFIG_MIPS64 */ +#endif /* CONFIG_64BIT */ mips_machgroup = MACH_GROUP_MOMENCO; mips_machtype = MACH_MOMENCO_OCELOT_C; @@ -232,7 +232,7 @@ void __init prom_init(void) get_mac(prom_mac_addr_base); #endif -#ifndef CONFIG_MIPS64 +#ifndef CONFIG_64BIT debug_vectors->printf("Booting Linux kernel...\n"); #endif } diff --git a/arch/mips/momentum/ocelot_c/reset.c b/arch/mips/momentum/ocelot_c/reset.c index 1f2b4263cc8c..6a2489f3b9a0 100644 --- a/arch/mips/momentum/ocelot_c/reset.c +++ b/arch/mips/momentum/ocelot_c/reset.c @@ -28,7 +28,7 @@ void momenco_ocelot_restart(char *command) { /* base address of timekeeper portion of part */ void *nvram = (void *) -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT 0xfffffffffc807000; #else 0xfc807000; diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c index 021c00e3c07c..844ddd06349b 100644 --- a/arch/mips/momentum/ocelot_c/setup.c +++ b/arch/mips/momentum/ocelot_c/setup.c @@ -109,7 +109,7 @@ void PMON_v2_setup(void) */ printk("PMON_v2_setup\n"); -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT /* marvell and extra space */ add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), 0xfffffffff4000000, PM_64K); /* fpga, rtc, and uart */ @@ -134,7 +134,7 @@ void PMON_v2_setup(void) unsigned long m48t37y_get_time(void) { -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT unsigned char *rtc_base = (unsigned char*)0xfffffffffc800000; #else unsigned char* rtc_base = (unsigned char*)0xfc800000; @@ -163,7 +163,7 @@ unsigned long m48t37y_get_time(void) int m48t37y_set_time(unsigned long sec) { -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT unsigned char* rtc_base = (unsigned char*)0xfffffffffc800000; #else unsigned char* rtc_base = (unsigned char*)0xfc800000; @@ -342,7 +342,7 @@ static void __init momenco_ocelot_c_setup(void) early_initcall(momenco_ocelot_c_setup); -#ifndef CONFIG_MIPS64 +#ifndef CONFIG_64BIT /* This needs to be one of the first initcalls, because no I/O port access can work before this */ static int io_base_ioremap(void) diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index c53e4cb359ba..83d81c9cdc2b 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o obj-$(CONFIG_SNI_RM200_PCI) += fixup-sni.o ops-sni.o obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o +obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o obj-$(CONFIG_TOSHIBA_JMR3927) += fixup-jmr3927.o pci-jmr3927.o obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o ops-tx4927.o obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o diff --git a/arch/mips/pci/fixup-ddb5074.c b/arch/mips/pci/fixup-ddb5074.c index b345e528a53c..5a4a7c239c42 100644 --- a/arch/mips/pci/fixup-ddb5074.c +++ b/arch/mips/pci/fixup-ddb5074.c @@ -5,7 +5,7 @@ static void ddb5074_fixup(struct pci_dev *dev) { extern struct pci_dev *pci_pmu; u8 t8; - + pci_pmu = dev; /* for LEDs D2 and D3 */ /* Program the lines for LEDs D2 and D3 to output */ pci_read_config_byte(dev, 0x7d, &t8); diff --git a/arch/mips/pci/fixup-ddb5477.c b/arch/mips/pci/fixup-ddb5477.c index 6abdc88bab1e..2f1444e60654 100644 --- a/arch/mips/pci/fixup-ddb5477.c +++ b/arch/mips/pci/fixup-ddb5477.c @@ -65,7 +65,7 @@ static void ddb5477_amd_lance_fixup(struct pci_dev *dev) ioaddr = pci_resource_start(dev, 0); inw(ioaddr + PCNET32_WIO_RESET); /* reset chip */ - + /* bcr_18 |= 0x0800 */ outw(18, ioaddr + PCNET32_WIO_RAP); temp = inw(ioaddr + PCNET32_WIO_BDP); diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c index b9296d9942b3..bf2c41d1e9c5 100644 --- a/arch/mips/pci/fixup-malta.c +++ b/arch/mips/pci/fixup-malta.c @@ -56,7 +56,7 @@ static void __init malta_piix_func0_fixup(struct pci_dev *pdev) 0, 0, 0, 3, 4, 5, 6, 7, 0, 9, 10, 11, - 12, 0, 14, 15 + 12, 0, 14, 15 }; int i; diff --git a/arch/mips/pci/fixup-rbtx4927.c b/arch/mips/pci/fixup-rbtx4927.c index de4e443da208..ceeb1860895a 100644 --- a/arch/mips/pci/fixup-rbtx4927.c +++ b/arch/mips/pci/fixup-rbtx4927.c @@ -7,7 +7,7 @@ * Author: MontaVista Software, Inc. * ppopov@mvista.com or source@mvista.com * - * Copyright (C) 2000-2001 Toshiba Corporation + * Copyright (C) 2000-2001 Toshiba Corporation * * Copyright (C) 2004 MontaVista Software Inc. * Author: Manish Lachwani (mlachwani@mvista.com) diff --git a/arch/mips/pci/fixup-sni.c b/arch/mips/pci/fixup-sni.c index c8ef01a017cc..a176f2ca8656 100644 --- a/arch/mips/pci/fixup-sni.c +++ b/arch/mips/pci/fixup-sni.c @@ -32,7 +32,7 @@ * Device 4: Unused * Device 5: Slot 2 * Device 6: Slot 3 - * Device 7: Slot 4 + * Device 7: Slot 4 * * Documentation says the VGA is device 5 and device 3 is unused but that * seem to be a documentation error. At least on my RM200C the Cirrus diff --git a/arch/mips/pci/fixup-tb0219.c b/arch/mips/pci/fixup-tb0219.c index 850a900f0eb4..bc55b06e1904 100644 --- a/arch/mips/pci/fixup-tb0219.c +++ b/arch/mips/pci/fixup-tb0219.c @@ -29,27 +29,12 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) switch (slot) { case 12: - vr41xx_set_irq_trigger(TB0219_PCI_SLOT1_PIN, - TRIGGER_LEVEL, - SIGNAL_THROUGH); - vr41xx_set_irq_level(TB0219_PCI_SLOT1_PIN, - LEVEL_LOW); irq = TB0219_PCI_SLOT1_IRQ; break; case 13: - vr41xx_set_irq_trigger(TB0219_PCI_SLOT2_PIN, - TRIGGER_LEVEL, - SIGNAL_THROUGH); - vr41xx_set_irq_level(TB0219_PCI_SLOT2_PIN, - LEVEL_LOW); irq = TB0219_PCI_SLOT2_IRQ; break; case 14: - vr41xx_set_irq_trigger(TB0219_PCI_SLOT3_PIN, - TRIGGER_LEVEL, - SIGNAL_THROUGH); - vr41xx_set_irq_level(TB0219_PCI_SLOT3_PIN, - LEVEL_LOW); irq = TB0219_PCI_SLOT3_IRQ; break; default: diff --git a/arch/mips/pci/fixup-tb0287.c b/arch/mips/pci/fixup-tb0287.c new file mode 100644 index 000000000000..8436d7f1fdb2 --- /dev/null +++ b/arch/mips/pci/fixup-tb0287.c @@ -0,0 +1,65 @@ +/* + * fixup-tb0287.c, The TANBAC TB0287 specific PCI fixups. + * + * Copyright (C) 2005 Yoichi Yuasa <yuasa@hh.iij4u.or.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/init.h> +#include <linux/pci.h> + +#include <asm/vr41xx/tb0287.h> + +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + unsigned char bus; + int irq = -1; + + bus = dev->bus->number; + if (bus == 0) { + switch (slot) { + case 16: + irq = TB0287_SM501_IRQ; + break; + case 17: + irq = TB0287_SIL680A_IRQ; + break; + default: + break; + } + } else if (bus == 1) { + switch (PCI_SLOT(dev->devfn)) { + case 0: + irq = TB0287_PCI_SLOT_IRQ; + break; + case 2: + case 3: + irq = TB0287_RTL8110_IRQ; + break; + default: + break; + } + } else if (bus > 1) { + irq = TB0287_PCI_SLOT_IRQ; + } + + return irq; +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} diff --git a/arch/mips/pci/ops-ddb5477.c b/arch/mips/pci/ops-ddb5477.c index e955443fedf9..0406b50a37d8 100644 --- a/arch/mips/pci/ops-ddb5477.c +++ b/arch/mips/pci/ops-ddb5477.c @@ -127,7 +127,7 @@ static inline void ddb_close_config_base(struct pci_config_swap *swap) } static int read_config_dword(struct pci_config_swap *swap, - struct pci_bus *bus, u32 devfn, u32 where, + struct pci_bus *bus, u32 devfn, u32 where, u32 * val) { u32 bus_num, slot_num, func_num; @@ -153,7 +153,7 @@ static int read_config_dword(struct pci_config_swap *swap, } static int read_config_word(struct pci_config_swap *swap, - struct pci_bus *bus, u32 devfn, u32 where, + struct pci_bus *bus, u32 devfn, u32 where, u16 * val) { int status; diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c index 2a9d7227fe87..7688b7711329 100644 --- a/arch/mips/pci/ops-tx4927.c +++ b/arch/mips/pci/ops-tx4927.c @@ -1,16 +1,16 @@ /* * Copyright 2001 MontaVista Software Inc. * Author: MontaVista Software, Inc. - * ahennessy@mvista.com + * ahennessy@mvista.com * - * Copyright (C) 2000-2001 Toshiba Corporation + * Copyright (C) 2000-2001 Toshiba Corporation * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) * * Based on arch/mips/ddb5xxx/ddb5477/pci_ops.c * * Define the pci_ops for the Toshiba rbtx4927 * - * Much of the code is derived from the original DDB5074 port by + * Much of the code is derived from the original DDB5074 port by * Geert Uytterhoeven <geert@sonycom.com> * * Copyright 2004 MontaVista Software Inc. diff --git a/arch/mips/pci/pci-ddb5477.c b/arch/mips/pci/pci-ddb5477.c index 4ddd53eaf656..826d653184e5 100644 --- a/arch/mips/pci/pci-ddb5477.c +++ b/arch/mips/pci/pci-ddb5477.c @@ -76,7 +76,7 @@ struct pci_controller ddb5477_io_controller = { */ /* - * irq mapping : device -> pci int # -> vrc4377 irq# , + * irq mapping : device -> pci int # -> vrc4377 irq# , * ddb5477 board manual page 4 and vrc5477 manual page 46 */ @@ -137,9 +137,9 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) unsigned char *slot_irq_map; unsigned char irq; - /* + /* * We ignore the swizzled slot and pin values. The original - * pci_fixup_irq() codes largely base irq number on the dev slot + * pci_fixup_irq() codes largely base irq number on the dev slot * numbers because except for one case they are unique even * though there are multiple pci buses. */ @@ -160,7 +160,7 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) if (mips_machtype == MACH_NEC_ROCKHOPPERII) { /* hack to distinquish overlapping slot 20s, one - * on bus 0 (ALI USB on the M1535 on the backplane), + * on bus 0 (ALI USB on the M1535 on the backplane), * and one on bus 2 (NEC USB controller on the CPU board) * Make the M1535 USB - ISA IRQ number 9. */ diff --git a/arch/mips/pci/pci-ip32.c b/arch/mips/pci/pci-ip32.c index 1faeb034f06e..000dc6af6cd3 100644 --- a/arch/mips/pci/pci-ip32.c +++ b/arch/mips/pci/pci-ip32.c @@ -84,7 +84,7 @@ static irqreturn_t macepci_error(int irq, void *dev, struct pt_regs *regs) extern struct pci_ops mace_pci_ops; -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT static struct resource mace_pci_mem_resource = { .name = "SGI O2 PCI MEM", .start = MACEPCI_HI_MEMORY, diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 8141dffac241..a8d499b0a36f 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -132,7 +132,7 @@ static int __init pcibios_init(void) hose->need_domain_info = need_domain_info; next_busno = bus->subordinate + 1; /* Don't allow 8-bit bus number overflow inside the hose - - reserve some space for bridges. */ + reserve some space for bridges. */ if (next_busno > 224) { next_busno = 0; need_domain_info = 1; @@ -260,7 +260,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { pci_read_bridge_bases(bus); pcibios_fixup_device_resources(dev, bus); - } + } for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { struct pci_dev *dev = pci_dev_b(ln); @@ -292,8 +292,25 @@ pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, region->end = res->end - offset; } +void __devinit +pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + struct pci_controller *hose = (struct pci_controller *)dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = hose->io_offset; + else if (res->flags & IORESOURCE_MEM) + offset = hose->mem_offset; + + res->start = region->start + offset; + res->end = region->end + offset; +} + #ifdef CONFIG_HOTPLUG EXPORT_SYMBOL(pcibios_resource_to_bus); +EXPORT_SYMBOL(pcibios_bus_to_resource); EXPORT_SYMBOL(PCIBIOS_MIN_IO); EXPORT_SYMBOL(PCIBIOS_MIN_MEM); #endif diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c index b067988614c3..97862f45496d 100644 --- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c +++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c @@ -30,7 +30,7 @@ * * This code reads the ATMEL 24CXX EEPROM. The PMC-Sierra Yosemite board uses the ATMEL * 24C32/24C64 which uses two byte addressing as compared to 24C16. Note that this program - * uses the serial port like /dev/ttyS0, to communicate with the EEPROM. Hence, you are + * uses the serial port like /dev/ttyS0, to communicate with the EEPROM. Hence, you are * expected to have a connectivity from the EEPROM to the serial port. This program does * __not__ communicate using the I2C protocol */ @@ -64,14 +64,14 @@ static void send_ack(void) static void send_byte(unsigned char byte) { int i = 0; - - for (i = 7; i >= 0; i--) + + for (i = 7; i >= 0; i--) send_bit((byte >> i) & 0x01); } - + static void send_start(void) { - sda_hi; + sda_hi; delay(TXX); scl_hi; delay(TXX); @@ -114,9 +114,9 @@ static unsigned char recv_byte(void) { int i; unsigned char byte=0; - for (i=7;i>=0;i--) + for (i=7;i>=0;i--) byte |= (recv_bit() << i); - + return byte; } diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h index d27566d99ffc..c19f01a32045 100644 --- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h +++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h @@ -27,7 +27,7 @@ */ /* - * Header file for atmel_read_eeprom.c + * Header file for atmel_read_eeprom.c */ #include <linux/types.h> @@ -46,7 +46,7 @@ #define DEFAULT_PORT "/dev/ttyS0" /* Port to open */ #define TXX 0 /* Dummy loop for spinning */ -#define BLOCK_SEL 0x00 +#define BLOCK_SEL 0x00 #define SLAVE_ADDR 0xa0 #define READ_BIT 0x01 #define WRITE_BIT 0x00 diff --git a/arch/mips/qemu/Makefile b/arch/mips/qemu/Makefile new file mode 100644 index 000000000000..934944ab9e85 --- /dev/null +++ b/arch/mips/qemu/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for Qemu specific kernel interface routines under Linux. +# + +obj-y = q-firmware.o q-int.o q-irq.o q-mem.o q-setup.o diff --git a/arch/mips/qemu/q-firmware.c b/arch/mips/qemu/q-firmware.c new file mode 100644 index 000000000000..5980f02b2df9 --- /dev/null +++ b/arch/mips/qemu/q-firmware.c @@ -0,0 +1,7 @@ +#include <linux/init.h> +#include <asm/bootinfo.h> + +void __init prom_init(void) +{ + add_memory_region(0x0<<20, 0x10<<20, BOOT_MEM_RAM); +} diff --git a/arch/mips/qemu/q-int.S b/arch/mips/qemu/q-int.S new file mode 100644 index 000000000000..6e3dfe5eb14b --- /dev/null +++ b/arch/mips/qemu/q-int.S @@ -0,0 +1,17 @@ +/* + * Qemu interrupt handler code. + * + * Copyright (C) 2005 by Ralf Baechle + */ +#include <asm/asm.h> +#include <asm/regdef.h> +#include <asm/stackframe.h> + + .align 5 + NESTED(qemu_handle_int, PT_SIZE, sp) + SAVE_ALL + CLI + move a0, sp + PTR_LA ra, ret_from_irq + j do_qemu_int + END(qemu_handle_int) diff --git a/arch/mips/qemu/q-irq.c b/arch/mips/qemu/q-irq.c new file mode 100644 index 000000000000..2c4e0704ff10 --- /dev/null +++ b/arch/mips/qemu/q-irq.c @@ -0,0 +1,37 @@ +#include <linux/init.h> +#include <linux/linkage.h> + +#include <asm/i8259.h> +#include <asm/mipsregs.h> +#include <asm/qemu.h> +#include <asm/system.h> +#include <asm/time.h> + +extern asmlinkage void qemu_handle_int(void); + +asmlinkage void do_qemu_int(struct pt_regs *regs) +{ + unsigned int pending = read_c0_status() & read_c0_cause(); + + if (pending & 0x8000) { + ll_timer_interrupt(Q_COUNT_COMPARE_IRQ, regs); + return; + } + if (pending & 0x0400) { + int irq = i8259_irq(); + + if (likely(irq >= 0)) + do_IRQ(irq, regs); + + return; + } +} + +void __init arch_init_irq(void) +{ + set_except_vector(0, qemu_handle_int); + mips_hpt_frequency = QEMU_C0_COUNTER_CLOCK; /* 100MHz */ + + init_i8259_irqs(); + set_c0_status(0x8400); +} diff --git a/arch/mips/qemu/q-mem.c b/arch/mips/qemu/q-mem.c new file mode 100644 index 000000000000..d174fac43031 --- /dev/null +++ b/arch/mips/qemu/q-mem.c @@ -0,0 +1,6 @@ +#include <linux/init.h> + +unsigned long __init prom_free_prom_memory(void) +{ + return 0UL; +} diff --git a/arch/mips/qemu/q-setup.c b/arch/mips/qemu/q-setup.c new file mode 100644 index 000000000000..1a80eee8cd35 --- /dev/null +++ b/arch/mips/qemu/q-setup.c @@ -0,0 +1,20 @@ +#include <linux/init.h> +#include <asm/io.h> +#include <asm/time.h> + +#define QEMU_PORT_BASE 0xb4000000 + +static void __init qemu_timer_setup(struct irqaction *irq) +{ + /* set the clock to 100 Hz */ + outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */ + outb_p(LATCH & 0xff , 0x40); /* LSB */ + outb(LATCH >> 8 , 0x40); /* MSB */ + setup_irq(0, irq); +} + +void __init plat_setup(void) +{ + set_io_port_base(QEMU_PORT_BASE); + board_timer_setup = qemu_timer_setup; +} diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c index 0ab4abf65d58..fa0e719c5bd1 100644 --- a/arch/mips/sgi-ip22/ip22-eisa.c +++ b/arch/mips/sgi-ip22/ip22-eisa.c @@ -242,7 +242,7 @@ int __init ip22_eisa_init(void) int i, c; char *str; u8 *slot_addr; - + if (!(sgimc->systemid & SGIMC_SYSID_EPRESENT)) { printk(KERN_INFO "EISA: bus not present.\n"); return 1; diff --git a/arch/mips/sgi-ip22/ip22-hpc.c b/arch/mips/sgi-ip22/ip22-hpc.c index c0afeccb08c4..5c00cdd20d8e 100644 --- a/arch/mips/sgi-ip22/ip22-hpc.c +++ b/arch/mips/sgi-ip22/ip22-hpc.c @@ -49,7 +49,7 @@ void __init sgihpc_init(void) sgint = &sgioc->int3; system_type = "SGI Indy"; } - + sgi_ioc_reset = (SGIOC_RESET_PPORT | SGIOC_RESET_KBDMOUSE | SGIOC_RESET_EISA | SGIOC_RESET_ISDN | SGIOC_RESET_LC0OFF); diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c index ea2844d29e6e..d16fb43b1a93 100644 --- a/arch/mips/sgi-ip22/ip22-int.c +++ b/arch/mips/sgi-ip22/ip22-int.c @@ -28,7 +28,7 @@ /* #define DEBUG_SGINT */ /* So far nothing hangs here */ -#undef USE_LIO3_IRQ +#undef USE_LIO3_IRQ struct sgint_regs *sgint; @@ -272,32 +272,32 @@ void indy_buserror_irq(struct pt_regs *regs) irq_exit(); } -static struct irqaction local0_cascade = { +static struct irqaction local0_cascade = { .handler = no_action, .flags = SA_INTERRUPT, .name = "local0 cascade", }; -static struct irqaction local1_cascade = { +static struct irqaction local1_cascade = { .handler = no_action, .flags = SA_INTERRUPT, .name = "local1 cascade", }; -static struct irqaction buserr = { +static struct irqaction buserr = { .handler = no_action, .flags = SA_INTERRUPT, .name = "Bus Error", }; -static struct irqaction map0_cascade = { +static struct irqaction map0_cascade = { .handler = no_action, .flags = SA_INTERRUPT, .name = "mapable0 cascade", }; #ifdef USE_LIO3_IRQ -static struct irqaction map1_cascade = { +static struct irqaction map1_cascade = { .handler = no_action, .flags = SA_INTERRUPT, .name = "mapable1 cascade", diff --git a/arch/mips/sgi-ip22/ip22-nvram.c b/arch/mips/sgi-ip22/ip22-nvram.c index de43e86fa17c..fd29fd407ae8 100644 --- a/arch/mips/sgi-ip22/ip22-nvram.c +++ b/arch/mips/sgi-ip22/ip22-nvram.c @@ -39,7 +39,7 @@ *ptr |= EEPROM_CSEL; \ *ptr |= EEPROM_ECLK; }) - + #define eeprom_cs_off(ptr) ({ \ *ptr &= ~EEPROM_ECLK; \ *ptr &= ~EEPROM_CSEL; \ @@ -50,7 +50,7 @@ /* * clock in the nvram command and the register number. For the * national semiconductor nv ram chip the op code is 3 bits and - * the address is 6/8 bits. + * the address is 6/8 bits. */ static inline void eeprom_cmd(volatile unsigned int *ctrl, unsigned cmd, unsigned reg) @@ -90,7 +90,7 @@ unsigned short ip22_eeprom_read(volatile unsigned int *ctrl, int reg) if (*ctrl & EEPROM_DATI) res |= 1; } - + eeprom_cs_off(ctrl); return res; @@ -113,7 +113,7 @@ unsigned short ip22_nvram_read(int reg) reg <<= 1; tmp = hpc3c0->bbram[reg++] & 0xff; return (tmp << 8) | (hpc3c0->bbram[reg] & 0xff); - } + } } EXPORT_SYMBOL(ip22_nvram_read); diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c index ed5c60adce63..214ffd2e98a3 100644 --- a/arch/mips/sgi-ip22/ip22-reset.c +++ b/arch/mips/sgi-ip22/ip22-reset.c @@ -185,7 +185,7 @@ static irqreturn_t panel_int(int irq, void *dev_id, struct pt_regs *regs) add_timer(&debounce_timer); } - /* Power button was pressed + /* Power button was pressed * ioc.ps page 22: "The Panel Register is called Power Control by Full * House. Only lowest 2 bits are used. Guiness uses upper four bits * for volume control". This is not true, all bits are pulled high diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c index 173f76805ea3..df9b5694328a 100644 --- a/arch/mips/sgi-ip22/ip22-time.c +++ b/arch/mips/sgi-ip22/ip22-time.c @@ -126,7 +126,7 @@ static __init void indy_time_init(void) unsigned long r4k_ticks[3]; unsigned long r4k_tick; - /* + /* * Figure out the r4k offset, the algorithm is very simple and works in * _all_ cases as long as the 8254 counter register itself works ok (as * an interrupt driving timer it does not because of bug, this is why diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index a160d04f7dbe..ef20d9ac0ba3 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -538,7 +538,7 @@ void __init mem_init(void) for_each_online_node(node) { unsigned slot, numslots; struct page *end, *p; - + /* * This will free up the bootmem, ie, slot 0 memory. */ diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 8c1b96fffa76..cddf1cedf007 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -118,7 +118,7 @@ again: * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to when a second starts. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c index 281f090e48a4..88e1f52059ff 100644 --- a/arch/mips/sgi-ip32/ip32-reset.c +++ b/arch/mips/sgi-ip32/ip32-reset.c @@ -140,7 +140,7 @@ static irqreturn_t ip32_rtc_int(int irq, void *dev_id, struct pt_regs *regs) reg_c = CMOS_READ(RTC_INTR_FLAGS); if (!(reg_c & RTC_IRQF)) { - printk(KERN_WARNING + printk(KERN_WARNING "%s: RTC IRQ without RTC_IRQF\n", __FUNCTION__); } /* Wait until interrupt goes away */ diff --git a/arch/mips/sibyte/cfe/cfe_error.h b/arch/mips/sibyte/cfe/cfe_error.h index 77eb4935bfb4..975f00002cbe 100644 --- a/arch/mips/sibyte/cfe/cfe_error.h +++ b/arch/mips/sibyte/cfe/cfe_error.h @@ -17,15 +17,15 @@ */ /* ********************************************************************* - * + * * Broadcom Common Firmware Environment (CFE) - * + * * Error codes File: cfe_error.h - * + * * CFE's global error code list is here. - * + * * Author: Mitch Lichtenberg - * + * ********************************************************************* */ diff --git a/arch/mips/sibyte/cfe/console.c b/arch/mips/sibyte/cfe/console.c index 53a5c1eb5611..7721100d0275 100644 --- a/arch/mips/sibyte/cfe/console.c +++ b/arch/mips/sibyte/cfe/console.c @@ -38,7 +38,7 @@ static void cfe_console_write(struct console *cons, const char *str, last += written; } while (last < count); } - + } static int cfe_console_setup(struct console *cons, char *str) diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c index d6d0364fa760..7a2c7a8510d4 100644 --- a/arch/mips/sibyte/cfe/setup.c +++ b/arch/mips/sibyte/cfe/setup.c @@ -33,7 +33,7 @@ #include "cfe_error.h" /* Max ram addressable in 32-bit segments */ -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT #define MAX_RAM_SIZE (~0ULL) #else #ifdef CONFIG_HIGHMEM @@ -285,7 +285,7 @@ void __init prom_init(void) while (1) ; } cfe_init(cfe_handle, cfe_ept); - /* + /* * Get the handle for (at least) prom_putchar, possibly for * boot console */ diff --git a/arch/mips/sibyte/cfe/smp.c b/arch/mips/sibyte/cfe/smp.c index 73392190d2b1..e44ce1a9eea9 100644 --- a/arch/mips/sibyte/cfe/smp.c +++ b/arch/mips/sibyte/cfe/smp.c @@ -57,7 +57,7 @@ void __init prom_prepare_cpus(unsigned int max_cpus) void prom_boot_secondary(int cpu, struct task_struct *idle) { int retval; - + retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap, __KSTK_TOS(idle), (unsigned long)idle->thread_info, 0); diff --git a/arch/mips/sibyte/sb1250/bus_watcher.c b/arch/mips/sibyte/sb1250/bus_watcher.c index 182a16f42e2d..1a97e3127aeb 100644 --- a/arch/mips/sibyte/sb1250/bus_watcher.c +++ b/arch/mips/sibyte/sb1250/bus_watcher.c @@ -10,13 +10,13 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ -/* +/* * The Bus Watcher monitors internal bus transactions and maintains * counts of transactions with error status, logging details and * causing one of several interrupts. This driver provides a handler @@ -155,7 +155,7 @@ static int bw_read_proc(char *page, char **start, off_t off, static void create_proc_decoder(struct bw_stats_struct *stats) { struct proc_dir_entry *ent; - + ent = create_proc_read_entry("bus_watcher", S_IWUSR | S_IRUGO, NULL, bw_read_proc, stats); if (!ent) { diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index 2728abbc94d2..2725b263cced 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -377,7 +377,7 @@ void __init arch_init_irq(void) /* * Note that the timer interrupts are also mapped, but this is - * done in sb1250_time_init(). Also, the profiling driver + * done in sb1250_time_init(). Also, the profiling driver * does its own management of IP7. */ @@ -392,7 +392,7 @@ void __init arch_init_irq(void) if (kgdb_flag) { kgdb_irq = K_INT_UART_0 + kgdb_port; -#ifdef CONFIG_SIBYTE_SB1250_DUART +#ifdef CONFIG_SIBYTE_SB1250_DUART sb1250_duart_present[kgdb_port] = 0; #endif /* Setup uart 1 settings, mapper */ diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c index 0e633ee8d83c..a686bb716ec6 100644 --- a/arch/mips/sibyte/swarm/rtc_m41t81.c +++ b/arch/mips/sibyte/swarm/rtc_m41t81.c @@ -128,7 +128,7 @@ static int m41t81_write(uint8_t addr, int b) /* Clear error bit by writing a 1 */ bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); return -1; - } + } /* read the same byte again to make sure it is written */ bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, @@ -136,7 +136,7 @@ static int m41t81_write(uint8_t addr, int b) while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - + return 0; } @@ -148,13 +148,13 @@ int m41t81_set_time(unsigned long t) /* * Note the write order matters as it ensures the correctness. - * When we write sec, 10th sec is clear. It is reasonable to + * When we write sec, 10th sec is clear. It is reasonable to * believe we should finish writing min within a second. */ tm.tm_sec = BIN2BCD(tm.tm_sec); m41t81_write(M41T81REG_SC, tm.tm_sec); - + tm.tm_min = BIN2BCD(tm.tm_min); m41t81_write(M41T81REG_MN, tm.tm_min); @@ -187,7 +187,7 @@ unsigned long m41t81_get_time(void) { unsigned int year, mon, day, hour, min, sec; - /* + /* * min is valid if two reads of sec are the same. */ for (;;) { diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c index 457aeb7be858..4daeaa413def 100644 --- a/arch/mips/sibyte/swarm/setup.c +++ b/arch/mips/sibyte/swarm/setup.c @@ -73,7 +73,7 @@ int swarm_be_handler(struct pt_regs *regs, int is_fixup) { if (!is_fixup && (regs->cp0_cause & 4)) { /* Data bus error - print PA */ -#ifdef CONFIG_MIPS64 +#ifdef CONFIG_64BIT printk("DBE physical address: %010lx\n", __read_64bit_c0_register($26, 1)); #else @@ -98,7 +98,7 @@ static int __init swarm_setup(void) rtc_get_time = xicor_get_time; rtc_set_time = xicor_set_time; } - + if (m41t81_probe()) { printk("swarm setup: M41T81 RTC detected.\n"); rtc_get_time = m41t81_get_time; diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c index 62c760f14674..141a310d74d8 100644 --- a/arch/mips/sni/irq.c +++ b/arch/mips/sni/irq.c @@ -103,7 +103,7 @@ static unsigned int ls1bit8(unsigned int x) /* * hwint 1 deals with EISA and SCSI interrupts, - * + * * The EISA_INT bit in CSITPEND is high active, all others are low active. */ void pciasic_hwint1(struct pt_regs *regs) diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c index 8f67cee4317b..1b3f8a0903e1 100644 --- a/arch/mips/sni/setup.c +++ b/arch/mips/sni/setup.c @@ -111,7 +111,7 @@ static struct resource sni_mem_resource = { * The RM200/RM300 has a few holes in it's PCI/EISA memory address space used * for other purposes. Be paranoid and allocate all of the before the PCI * code gets a chance to to map anything else there ... - * + * * This leaves the following areas available: * * 0x10000000 - 0x1009ffff (640kB) PCI/EISA/ISA Bus Memory diff --git a/arch/mips/tx4927/common/tx4927_irq_handler.S b/arch/mips/tx4927/common/tx4927_irq_handler.S index ca123e28d1ef..dd3ceda9d712 100644 --- a/arch/mips/tx4927/common/tx4927_irq_handler.S +++ b/arch/mips/tx4927/common/tx4927_irq_handler.S @@ -42,13 +42,13 @@ CLI .set at - mfc0 t0, CP0_CAUSE + mfc0 t0, CP0_CAUSE mfc0 t1, CP0_STATUS and t0, t1 - + andi t1, t0, STATUSF_IP7 /* cpu timer */ bnez t1, ll_ip7 - + /* IP6..IP3 multiplexed -- do not use */ andi t1, t0, STATUSF_IP2 /* tx4927 pic */ diff --git a/arch/mips/tx4927/common/tx4927_setup.c b/arch/mips/tx4927/common/tx4927_setup.c index 16bcbdc6d1cc..26d7c53612a8 100644 --- a/arch/mips/tx4927/common/tx4927_setup.c +++ b/arch/mips/tx4927/common/tx4927_setup.c @@ -152,7 +152,7 @@ dump_cp0(char *key) print_cp0(key, 16, "CONFIG ", read_c0_config()); return; } - + void print_pic(char *key, u32 reg, char *name) { printk("%s pic:0x%08x:%s=0x%08x\n", key, reg, name, diff --git a/arch/mips/tx4927/toshiba_rbtx4927/Makefile b/arch/mips/tx4927/toshiba_rbtx4927/Makefile index 86ca4cf2d587..c1a377a80a5d 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/Makefile +++ b/arch/mips/tx4927/toshiba_rbtx4927/Makefile @@ -1,5 +1,5 @@ -obj-y += toshiba_rbtx4927_prom.o -obj-y += toshiba_rbtx4927_setup.o -obj-y += toshiba_rbtx4927_irq.o +obj-y += toshiba_rbtx4927_prom.o +obj-y += toshiba_rbtx4927_setup.o +obj-y += toshiba_rbtx4927_irq.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c index fd5b433f83b7..aee07ff2212a 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c @@ -31,7 +31,7 @@ /* -IRQ Device +IRQ Device 00 RBTX4927-ISA/00 01 RBTX4927-ISA/01 PS2/Keyboard 02 RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15) @@ -52,15 +52,15 @@ IRQ Device 16 TX4927-CP0/00 Software 0 17 TX4927-CP0/01 Software 1 18 TX4927-CP0/02 Cascade TX4927-CP0 -19 TX4927-CP0/03 Multiplexed -- do not use -20 TX4927-CP0/04 Multiplexed -- do not use -21 TX4927-CP0/05 Multiplexed -- do not use -22 TX4927-CP0/06 Multiplexed -- do not use +19 TX4927-CP0/03 Multiplexed -- do not use +20 TX4927-CP0/04 Multiplexed -- do not use +21 TX4927-CP0/05 Multiplexed -- do not use +22 TX4927-CP0/06 Multiplexed -- do not use 23 TX4927-CP0/07 CPU TIMER 24 TX4927-PIC/00 25 TX4927-PIC/01 -26 TX4927-PIC/02 +26 TX4927-PIC/02 27 TX4927-PIC/03 Cascade RBTX4927-IOC 28 TX4927-PIC/04 29 TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet @@ -80,7 +80,7 @@ IRQ Device 43 TX4927-PIC/19 44 TX4927-PIC/20 45 TX4927-PIC/21 -46 TX4927-PIC/22 TX4927 PCI PCI-ERR +46 TX4927-PIC/22 TX4927 PCI PCI-ERR 47 TX4927-PIC/23 TX4927 PCI PCI-PMA (not used) 48 TX4927-PIC/24 49 TX4927-PIC/25 @@ -100,7 +100,7 @@ IRQ Device 62 RBTX4927-IOC/06 63 RBTX4927-IOC/07 -NOTES: +NOTES: SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58 SouthBridge/ISA/pin=0 no pci irq used by this device SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14 @@ -175,19 +175,19 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB static const u32 toshiba_rbtx4927_irq_debug_flag = (TOSHIBA_RBTX4927_IRQ_NONE | TOSHIBA_RBTX4927_IRQ_INFO | TOSHIBA_RBTX4927_IRQ_WARN | TOSHIBA_RBTX4927_IRQ_EROR -// | TOSHIBA_RBTX4927_IRQ_IOC_INIT -// | TOSHIBA_RBTX4927_IRQ_IOC_STARTUP -// | TOSHIBA_RBTX4927_IRQ_IOC_SHUTDOWN -// | TOSHIBA_RBTX4927_IRQ_IOC_ENABLE -// | TOSHIBA_RBTX4927_IRQ_IOC_DISABLE -// | TOSHIBA_RBTX4927_IRQ_IOC_MASK -// | TOSHIBA_RBTX4927_IRQ_IOC_ENDIRQ -// | TOSHIBA_RBTX4927_IRQ_ISA_INIT -// | TOSHIBA_RBTX4927_IRQ_ISA_STARTUP -// | TOSHIBA_RBTX4927_IRQ_ISA_SHUTDOWN -// | TOSHIBA_RBTX4927_IRQ_ISA_ENABLE -// | TOSHIBA_RBTX4927_IRQ_ISA_DISABLE -// | TOSHIBA_RBTX4927_IRQ_ISA_MASK +// | TOSHIBA_RBTX4927_IRQ_IOC_INIT +// | TOSHIBA_RBTX4927_IRQ_IOC_STARTUP +// | TOSHIBA_RBTX4927_IRQ_IOC_SHUTDOWN +// | TOSHIBA_RBTX4927_IRQ_IOC_ENABLE +// | TOSHIBA_RBTX4927_IRQ_IOC_DISABLE +// | TOSHIBA_RBTX4927_IRQ_IOC_MASK +// | TOSHIBA_RBTX4927_IRQ_IOC_ENDIRQ +// | TOSHIBA_RBTX4927_IRQ_ISA_INIT +// | TOSHIBA_RBTX4927_IRQ_ISA_STARTUP +// | TOSHIBA_RBTX4927_IRQ_ISA_SHUTDOWN +// | TOSHIBA_RBTX4927_IRQ_ISA_ENABLE +// | TOSHIBA_RBTX4927_IRQ_ISA_DISABLE +// | TOSHIBA_RBTX4927_IRQ_ISA_MASK // | TOSHIBA_RBTX4927_IRQ_ISA_ENDIRQ ); #endif diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c index 8724ea3ae04e..fc0720599fd9 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c @@ -395,7 +395,7 @@ static int __init tx4927_pcibios_init(void) /* enable secondary ide */ v08_43 |= 0x80; - /* + /* * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! * * This line of code is intended to provide the user with a work diff --git a/arch/mips/vr4181/common/Makefile b/arch/mips/vr4181/common/Makefile deleted file mode 100644 index f7587ca64ead..000000000000 --- a/arch/mips/vr4181/common/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for common code of NEC vr4181 based boards -# - -obj-y := irq.o int_handler.o serial.o time.o - -EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/vr4181/common/int_handler.S b/arch/mips/vr4181/common/int_handler.S deleted file mode 100644 index 2c041b8ee52b..000000000000 --- a/arch/mips/vr4181/common/int_handler.S +++ /dev/null @@ -1,206 +0,0 @@ -/* - * arch/mips/vr4181/common/int_handler.S - * - * Adapted to the VR4181 and almost entirely rewritten: - * Copyright (C) 1999 Bradley D. LaRonde and Michael Klar - * - * Clean up to conform to the new IRQ - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#include <asm/asm.h> -#include <asm/regdef.h> -#include <asm/mipsregs.h> -#include <asm/stackframe.h> - -#include <asm/vr4181/vr4181.h> - -/* - * [jsun] - * See include/asm/vr4181/irq.h for IRQ assignment and strategy. - */ - - .text - .set noreorder - - .align 5 - NESTED(vr4181_handle_irq, PT_SIZE, ra) - - .set noat - SAVE_ALL - CLI - - .set at - .set noreorder - - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - /* we check IP3 first; it happens most frequently */ - andi t1, t0, STATUSF_IP3 - bnez t1, ll_cpu_ip3 - andi t1, t0, STATUSF_IP2 - bnez t1, ll_cpu_ip2 - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_cputimer_irq - andi t1, t0, STATUSF_IP4 - bnez t1, ll_cpu_ip4 - andi t1, t0, STATUSF_IP5 - bnez t1, ll_cpu_ip5 - andi t1, t0, STATUSF_IP6 - bnez t1, ll_cpu_ip6 - andi t1, t0, STATUSF_IP0 /* software int 0 */ - bnez t1, ll_cpu_ip0 - andi t1, t0, STATUSF_IP1 /* software int 1 */ - bnez t1, ll_cpu_ip1 - nop - - .set reorder -do_spurious: - j spurious_interrupt - -/* - * regular CPU irqs - */ -ll_cputimer_irq: - li a0, VR4181_IRQ_TIMER - move a1, sp - jal do_IRQ - j ret_from_irq - - -ll_cpu_ip0: - li a0, VR4181_IRQ_SW1 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip1: - li a0, VR4181_IRQ_SW2 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip3: - li a0, VR4181_IRQ_INT1 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip4: - li a0, VR4181_IRQ_INT2 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip5: - li a0, VR4181_IRQ_INT3 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpu_ip6: - li a0, VR4181_IRQ_INT4 - move a1, sp - jal do_IRQ - j ret_from_irq - -/* - * One of the sys irq has happend. - * - * In the interest of speed, we first determine in the following order - * which 16-irq block have pending interrupts: - * sysint1 (16 sources, including cascading intrs from GPIO) - * sysint2 - * gpio (16 intr sources) - * - * Then we do binary search to find the exact interrupt source. - */ -ll_cpu_ip2: - - lui t3,%hi(VR4181_SYSINT1REG) - lhu t0,%lo(VR4181_SYSINT1REG)(t3) - lhu t2,%lo(VR4181_MSYSINT1REG)(t3) - and t0, 0xfffb /* hack - remove RTC Long 1 intr */ - and t0, t2 - beqz t0, check_sysint2 - - /* check for GPIO interrupts */ - andi t1, t0, 0x0100 - bnez t1, check_gpio_int - - /* so we have an interrupt in sysint1 which is not gpio int */ - li a0, VR4181_SYS_IRQ_BASE - 1 - j check_16 - -check_sysint2: - - lhu t0,%lo(VR4181_SYSINT2REG)(t3) - lhu t2,%lo(VR4181_MSYSINT2REG)(t3) - and t0, 0xfffe /* hack - remove RTC Long 2 intr */ - and t0, t2 - li a0, VR4181_SYS_IRQ_BASE + 16 - 1 - j check_16 - -check_gpio_int: - lui t3,%hi(VR4181_GPINTMSK) - lhu t0,%lo(VR4181_GPINTMSK)(t3) - lhu t2,%lo(VR4181_GPINTSTAT)(t3) - xori t0, 0xffff /* why? reverse logic? */ - and t0, t2 - li a0, VR4181_GPIO_IRQ_BASE - 1 - j check_16 - -/* - * When we reach check_16, we have 16-bit status in t0 and base irq number - * in a0. - */ -check_16: - andi t1, t0, 0xff - bnez t1, check_8 - - srl t0, 8 - addi a0, 8 - j check_8 - -/* - * When we reach check_8, we have 8-bit status in t0 and base irq number - * in a0. - */ -check_8: - andi t1, t0, 0xf - bnez t1, check_4 - - srl t0, 4 - addi a0, 4 - j check_4 - -/* - * When we reach check_4, we have 4-bit status in t0 and base irq number - * in a0. - */ -check_4: - andi t0, t0, 0xf - beqz t0, do_spurious - -loop: - andi t2, t0, 0x1 - srl t0, 1 - addi a0, 1 - beqz t2, loop - -found_it: - move a1, sp - jal do_IRQ - - j ret_from_irq - - END(vr4181_handle_irq) diff --git a/arch/mips/vr4181/common/irq.c b/arch/mips/vr4181/common/irq.c deleted file mode 100644 index 2cdf77c5cb3e..000000000000 --- a/arch/mips/vr4181/common/irq.c +++ /dev/null @@ -1,239 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) - * - * linux/arch/mips/vr4181/common/irq.c - * Completely re-written to use the new irq.c - * - * Credits to Bradley D. LaRonde and Michael Klar for writing the original - * irq.c file which was derived from the common irq.c file. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/types.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/slab.h> -#include <linux/random.h> - -#include <asm/irq.h> -#include <asm/mipsregs.h> -#include <asm/gdb-stub.h> - -#include <asm/vr4181/vr4181.h> - -/* - * Strategy: - * - * We essentially have three irq controllers, CPU, system, and gpio. - * - * CPU irq controller is taken care by arch/mips/kernel/irq_cpu.c and - * CONFIG_IRQ_CPU config option. - * - * We here provide sys_irq and gpio_irq controller code. - */ - -static int sys_irq_base; -static int gpio_irq_base; - -/* ---------------------- sys irq ------------------------ */ -static void -sys_irq_enable(unsigned int irq) -{ - irq -= sys_irq_base; - if (irq < 16) { - *VR4181_MSYSINT1REG |= (u16)(1 << irq); - } else { - irq -= 16; - *VR4181_MSYSINT2REG |= (u16)(1 << irq); - } -} - -static void -sys_irq_disable(unsigned int irq) -{ - irq -= sys_irq_base; - if (irq < 16) { - *VR4181_MSYSINT1REG &= ~((u16)(1 << irq)); - } else { - irq -= 16; - *VR4181_MSYSINT2REG &= ~((u16)(1 << irq)); - } - -} - -static unsigned int -sys_irq_startup(unsigned int irq) -{ - sys_irq_enable(irq); - return 0; -} - -#define sys_irq_shutdown sys_irq_disable -#define sys_irq_ack sys_irq_disable - -static void -sys_irq_end(unsigned int irq) -{ - if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - sys_irq_enable(irq); -} - -static hw_irq_controller sys_irq_controller = { - "vr4181_sys_irq", - sys_irq_startup, - sys_irq_shutdown, - sys_irq_enable, - sys_irq_disable, - sys_irq_ack, - sys_irq_end, - NULL /* no affinity stuff for UP */ -}; - -/* ---------------------- gpio irq ------------------------ */ -/* gpio irq lines use reverse logic */ -static void -gpio_irq_enable(unsigned int irq) -{ - irq -= gpio_irq_base; - *VR4181_GPINTMSK &= ~((u16)(1 << irq)); -} - -static void -gpio_irq_disable(unsigned int irq) -{ - irq -= gpio_irq_base; - *VR4181_GPINTMSK |= (u16)(1 << irq); -} - -static unsigned int -gpio_irq_startup(unsigned int irq) -{ - gpio_irq_enable(irq); - - irq -= gpio_irq_base; - *VR4181_GPINTEN |= (u16)(1 << irq ); - - return 0; -} - -static void -gpio_irq_shutdown(unsigned int irq) -{ - gpio_irq_disable(irq); - - irq -= gpio_irq_base; - *VR4181_GPINTEN &= ~((u16)(1 << irq )); -} - -static void -gpio_irq_ack(unsigned int irq) -{ - u16 irqtype; - u16 irqshift; - - gpio_irq_disable(irq); - - /* we clear interrupt if it is edge triggered */ - irq -= gpio_irq_base; - if (irq < 8) { - irqtype = *VR4181_GPINTTYPL; - irqshift = 2 << (irq*2); - } else { - irqtype = *VR4181_GPINTTYPH; - irqshift = 2 << ((irq-8)*2); - } - if ( ! (irqtype & irqshift) ) { - *VR4181_GPINTSTAT = (u16) (1 << irq); - } -} - -static void -gpio_irq_end(unsigned int irq) -{ - if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - gpio_irq_enable(irq); -} - -static hw_irq_controller gpio_irq_controller = { - "vr4181_gpio_irq", - gpio_irq_startup, - gpio_irq_shutdown, - gpio_irq_enable, - gpio_irq_disable, - gpio_irq_ack, - gpio_irq_end, - NULL /* no affinity stuff for UP */ -}; - -/* --------------------- IRQ init stuff ---------------------- */ - -extern asmlinkage void vr4181_handle_irq(void); -extern void breakpoint(void); -extern int setup_irq(unsigned int irq, struct irqaction *irqaction); -extern void mips_cpu_irq_init(u32 irq_base); - -static struct irqaction cascade = - { no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade", NULL, NULL }; -static struct irqaction reserved = - { no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade", NULL, NULL }; - -void __init arch_init_irq(void) -{ - int i; - - set_except_vector(0, vr4181_handle_irq); - - /* init CPU irqs */ - mips_cpu_irq_init(VR4181_CPU_IRQ_BASE); - - /* init sys irqs */ - sys_irq_base = VR4181_SYS_IRQ_BASE; - for (i=sys_irq_base; i < sys_irq_base + VR4181_NUM_SYS_IRQ; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].handler = &sys_irq_controller; - } - - /* init gpio irqs */ - gpio_irq_base = VR4181_GPIO_IRQ_BASE; - for (i=gpio_irq_base; i < gpio_irq_base + VR4181_NUM_GPIO_IRQ; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].handler = &gpio_irq_controller; - } - - /* Default all ICU IRQs to off ... */ - *VR4181_MSYSINT1REG = 0; - *VR4181_MSYSINT2REG = 0; - - /* We initialize the level 2 ICU registers to all bits disabled. */ - *VR4181_MPIUINTREG = 0; - *VR4181_MAIUINTREG = 0; - *VR4181_MKIUINTREG = 0; - - /* disable all GPIO intrs */ - *VR4181_GPINTMSK = 0xffff; - - /* vector handler. What these do is register the IRQ as non-sharable */ - setup_irq(VR4181_IRQ_INT0, &cascade); - setup_irq(VR4181_IRQ_GIU, &cascade); - - /* - * RTC interrupts are interesting. They have two destinations. - * One is at sys irq controller, and the other is at CPU IP3 and IP4. - * RTC timer is used as system timer. - * We enable them here, but timer routine will register later - * with CPU IP3/IP4. - */ - setup_irq(VR4181_IRQ_RTCL1, &reserved); - setup_irq(VR4181_IRQ_RTCL2, &reserved); -} diff --git a/arch/mips/vr4181/common/serial.c b/arch/mips/vr4181/common/serial.c deleted file mode 100644 index 3f62c62b107f..000000000000 --- a/arch/mips/vr4181/common/serial.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * arch/mips/vr4181/common/serial.c - * initialize serial port on vr4181. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -/* - * [jsun, 010925] - * You need to make sure rs_table has at least one element in - * drivers/char/serial.c file. There is no good way to do it right - * now. A workaround is to include CONFIG_SERIAL_MANY_PORTS in your - * configure file, which would gives you 64 ports and wastes 11K ram. - */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/serial.h> - -#include <asm/vr4181/vr4181.h> - -void __init vr4181_init_serial(void) -{ - struct serial_struct s; - - /* turn on UART clock */ - *VR4181_CMUCLKMSK |= VR4181_CMUCLKMSK_MSKSIU; - - /* clear memory */ - memset(&s, 0, sizeof(s)); - - s.line = 0; /* we set the first one */ - s.baud_base = 1152000; - s.irq = VR4181_IRQ_SIU; - s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; /* STD_COM_FLAGS */ - s.iomem_base = (u8*)VR4181_SIURB; - s.iomem_reg_shift = 0; - s.io_type = SERIAL_IO_MEM; - if (early_serial_setup(&s) != 0) { - panic("vr4181_init_serial() failed!"); - } -} - diff --git a/arch/mips/vr4181/common/time.c b/arch/mips/vr4181/common/time.c deleted file mode 100644 index 17814076b6f4..000000000000 --- a/arch/mips/vr4181/common/time.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * rtc and time ops for vr4181. Part of code is drived from - * linux-vr, originally written by Bradley D. LaRonde & Michael Klar. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/kernel.h> -#include <linux/spinlock.h> -#include <linux/param.h> /* for HZ */ -#include <linux/time.h> -#include <linux/interrupt.h> - -#include <asm/system.h> -#include <asm/time.h> - -#include <asm/vr4181/vr4181.h> - -#define COUNTS_PER_JIFFY ((32768 + HZ/2) / HZ) - -/* - * RTC ops - */ - -DEFINE_SPINLOCK(rtc_lock); - -/* per VR41xx docs, bad data can be read if between 2 counts */ -static inline unsigned short -read_time_reg(volatile unsigned short *reg) -{ - unsigned short value; - do { - value = *reg; - barrier(); - } while (value != *reg); - return value; -} - -static unsigned long -vr4181_rtc_get_time(void) -{ - unsigned short regh, regm, regl; - - // why this crazy order, you ask? to guarantee that neither m - // nor l wrap before all 3 read - do { - regm = read_time_reg(VR4181_ETIMEMREG); - barrier(); - regh = read_time_reg(VR4181_ETIMEHREG); - barrier(); - regl = read_time_reg(VR4181_ETIMELREG); - } while (regm != read_time_reg(VR4181_ETIMEMREG)); - return ((regh << 17) | (regm << 1) | (regl >> 15)); -} - -static int -vr4181_rtc_set_time(unsigned long timeval) -{ - unsigned short intreg; - unsigned long flags; - - spin_lock_irqsave(&rtc_lock, flags); - intreg = *VR4181_RTCINTREG & 0x05; - barrier(); - *VR4181_ETIMELREG = timeval << 15; - *VR4181_ETIMEMREG = timeval >> 1; - *VR4181_ETIMEHREG = timeval >> 17; - barrier(); - // assume that any ints that just triggered are invalid, since the - // time value is written non-atomically in 3 separate regs - *VR4181_RTCINTREG = 0x05 ^ intreg; - spin_unlock_irqrestore(&rtc_lock, flags); - - return 0; -} - - -/* - * timer interrupt routine (wrapper) - * - * we need our own interrupt routine because we need to clear - * RTC1 interrupt. - */ -static void -vr4181_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - /* Clear the interrupt. */ - *VR4181_RTCINTREG = 0x2; - - /* call the generic one */ - timer_interrupt(irq, dev_id, regs); -} - - -/* - * vr4181_time_init: - * - * We pick the following choices: - * . we use elapsed timer as the RTC. We set some reasonable init data since - * it does not persist across reset - * . we use RTC1 as the system timer interrupt source. - * . we use CPU counter for fast_gettimeoffset and we calivrate the cpu - * frequency. In other words, we use calibrate_div64_gettimeoffset(). - * . we use our own timer interrupt routine which clears the interrupt - * and then calls the generic high-level timer interrupt routine. - * - */ - -extern int setup_irq(unsigned int irq, struct irqaction *irqaction); - -static void -vr4181_timer_setup(struct irqaction *irq) -{ - /* over-write the handler to be our own one */ - irq->handler = vr4181_timer_interrupt; - - /* sets up the frequency */ - *VR4181_RTCL1LREG = COUNTS_PER_JIFFY; - *VR4181_RTCL1HREG = 0; - - /* and ack any pending ints */ - *VR4181_RTCINTREG = 0x2; - - /* setup irqaction */ - setup_irq(VR4181_IRQ_INT1, irq); - -} - -void -vr4181_init_time(void) -{ - /* setup hookup functions */ - rtc_get_time = vr4181_rtc_get_time; - rtc_set_time = vr4181_rtc_set_time; - - board_timer_setup = vr4181_timer_setup; -} - diff --git a/arch/mips/vr4181/osprey/Makefile b/arch/mips/vr4181/osprey/Makefile deleted file mode 100644 index 34be05790883..000000000000 --- a/arch/mips/vr4181/osprey/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for common code of NEC Osprey board -# - -obj-y := setup.o prom.o reset.o - -obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/vr4181/osprey/dbg_io.c b/arch/mips/vr4181/osprey/dbg_io.c deleted file mode 100644 index 5e8a84072d5b..000000000000 --- a/arch/mips/vr4181/osprey/dbg_io.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * kgdb io functions for osprey. We use the serial port on debug board. - * - * Copyright (C) 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -/* ======================= CONFIG ======================== */ - -/* [jsun] we use the second serial port for kdb */ -#define BASE 0xb7fffff0 -#define MAX_BAUD 115200 - -/* distance in bytes between two serial registers */ -#define REG_OFFSET 1 - -/* - * 0 - kgdb does serial init - * 1 - kgdb skip serial init - */ -static int remoteDebugInitialized = 1; - -/* - * the default baud rate *if* kgdb does serial init - */ -#define BAUD_DEFAULT UART16550_BAUD_38400 - -/* ======================= END OF CONFIG ======================== */ - -typedef unsigned char uint8; -typedef unsigned int uint32; - -#define UART16550_BAUD_2400 2400 -#define UART16550_BAUD_4800 4800 -#define UART16550_BAUD_9600 9600 -#define UART16550_BAUD_19200 19200 -#define UART16550_BAUD_38400 38400 -#define UART16550_BAUD_57600 57600 -#define UART16550_BAUD_115200 115200 - -#define UART16550_PARITY_NONE 0 -#define UART16550_PARITY_ODD 0x08 -#define UART16550_PARITY_EVEN 0x18 -#define UART16550_PARITY_MARK 0x28 -#define UART16550_PARITY_SPACE 0x38 - -#define UART16550_DATA_5BIT 0x0 -#define UART16550_DATA_6BIT 0x1 -#define UART16550_DATA_7BIT 0x2 -#define UART16550_DATA_8BIT 0x3 - -#define UART16550_STOP_1BIT 0x0 -#define UART16550_STOP_2BIT 0x4 - -/* register offset */ -#define OFS_RCV_BUFFER 0 -#define OFS_TRANS_HOLD 0 -#define OFS_SEND_BUFFER 0 -#define OFS_INTR_ENABLE (1*REG_OFFSET) -#define OFS_INTR_ID (2*REG_OFFSET) -#define OFS_DATA_FORMAT (3*REG_OFFSET) -#define OFS_LINE_CONTROL (3*REG_OFFSET) -#define OFS_MODEM_CONTROL (4*REG_OFFSET) -#define OFS_RS232_OUTPUT (4*REG_OFFSET) -#define OFS_LINE_STATUS (5*REG_OFFSET) -#define OFS_MODEM_STATUS (6*REG_OFFSET) -#define OFS_RS232_INPUT (6*REG_OFFSET) -#define OFS_SCRATCH_PAD (7*REG_OFFSET) - -#define OFS_DIVISOR_LSB (0*REG_OFFSET) -#define OFS_DIVISOR_MSB (1*REG_OFFSET) - - -/* memory-mapped read/write of the port */ -#define UART16550_READ(y) (*((volatile uint8*)(BASE + y))) -#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z) - -void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) -{ - /* disable interrupts */ - UART16550_WRITE(OFS_INTR_ENABLE, 0); - - /* set up buad rate */ - { - uint32 divisor; - - /* set DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x80); - - /* set divisor */ - divisor = MAX_BAUD / baud; - UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff); - UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8); - - /* clear DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x0); - } - - /* set data format */ - UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop); -} - - -uint8 getDebugChar(void) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(BAUD_DEFAULT, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, UART16550_STOP_1BIT); - } - - while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0); - return UART16550_READ(OFS_RCV_BUFFER); -} - - -int putDebugChar(uint8 byte) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(BAUD_DEFAULT, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, UART16550_STOP_1BIT); - } - - while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0); - UART16550_WRITE(OFS_SEND_BUFFER, byte); - return 1; -} diff --git a/arch/mips/vr4181/osprey/prom.c b/arch/mips/vr4181/osprey/prom.c deleted file mode 100644 index af0d14561619..000000000000 --- a/arch/mips/vr4181/osprey/prom.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * arch/mips/vr4181/osprey/prom.c - * prom code for osprey. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/bootmem.h> -#include <asm/bootinfo.h> -#include <asm/addrspace.h> - -const char *get_system_type(void) -{ - return "NEC_Vr41xx Osprey"; -} - -/* - * [jsun] right now we assume it is the nec debug monitor, which does - * not pass any arguments. - */ -void __init prom_init(void) -{ - // cmdline is now set in default config - // strcpy(arcs_cmdline, "ip=bootp "); - // strcat(arcs_cmdline, "ether=46,0x03fe0300,eth0 "); - // strcpy(arcs_cmdline, "ether=0,0x0300,eth0 " - // strcat(arcs_cmdline, "video=vr4181fb:xres:240,yres:320,bpp:8 "); - - mips_machgroup = MACH_GROUP_NEC_VR41XX; - mips_machtype = MACH_NEC_OSPREY; - - /* 16MB fixed */ - add_memory_region(0, 16 << 20, BOOT_MEM_RAM); -} - -unsigned long __init prom_free_prom_memory(void) -{ - return 0; -} diff --git a/arch/mips/vr4181/osprey/reset.c b/arch/mips/vr4181/osprey/reset.c deleted file mode 100644 index 036ae83d89d6..000000000000 --- a/arch/mips/vr4181/osprey/reset.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Copyright (C) 1997, 2001 Ralf Baechle - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - */ -#include <linux/sched.h> -#include <linux/mm.h> -#include <asm/io.h> -#include <asm/cacheflush.h> -#include <asm/processor.h> -#include <asm/reboot.h> -#include <asm/system.h> - -void nec_osprey_restart(char *command) -{ - set_c0_status(ST0_ERL); - change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); - flush_cache_all(); - write_c0_wired(0); - __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); -} - -void nec_osprey_halt(void) -{ - printk(KERN_NOTICE "\n** You can safely turn off the power\n"); - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); -} - -void nec_osprey_power_off(void) -{ - nec_osprey_halt(); -} diff --git a/arch/mips/vr4181/osprey/setup.c b/arch/mips/vr4181/osprey/setup.c deleted file mode 100644 index 2ff7140e7ed7..000000000000 --- a/arch/mips/vr4181/osprey/setup.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * linux/arch/mips/vr4181/setup.c - * - * VR41xx setup routines - * - * Copyright (C) 1999 Bradley D. LaRonde - * Copyright (C) 1999, 2000 Michael Klar - * - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#include <linux/ide.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <asm/reboot.h> -#include <asm/vr4181/vr4181.h> -#include <asm/io.h> - - -extern void nec_osprey_restart(char* c); -extern void nec_osprey_halt(void); -extern void nec_osprey_power_off(void); - -extern void vr4181_init_serial(void); -extern void vr4181_init_time(void); - -static void __init nec_osprey_setup(void) -{ - set_io_port_base(VR4181_PORT_BASE); - isa_slot_offset = VR4181_ISAMEM_BASE; - - vr4181_init_serial(); - vr4181_init_time(); - - _machine_restart = nec_osprey_restart; - _machine_halt = nec_osprey_halt; - _machine_power_off = nec_osprey_power_off; - - /* setup resource limit */ - ioport_resource.end = 0xffffffff; - iomem_resource.end = 0xffffffff; - - /* [jsun] hack */ - /* - printk("[jsun] hack to change external ISA control register, %x -> %x\n", - (*VR4181_XISACTL), - (*VR4181_XISACTL) | 0x2); - *VR4181_XISACTL |= 0x2; - */ - - // *VR4181_GPHIBSTH = 0x2000; - // *VR4181_GPMD0REG = 0x00c0; - // *VR4181_GPINTEN = 1<<6; - - /* [jsun] I believe this will get the interrupt type right - * for the ether port. - */ - *VR4181_GPINTTYPL = 0x3000; -} - -early_initcall(nec_osprey_setup); diff --git a/arch/mips/vr41xx/casio-e55/setup.c b/arch/mips/vr41xx/casio-e55/setup.c index aa8605ab76ff..d29201acc4f3 100644 --- a/arch/mips/vr41xx/casio-e55/setup.c +++ b/arch/mips/vr41xx/casio-e55/setup.c @@ -23,11 +23,6 @@ #include <asm/io.h> #include <asm/vr41xx/e55.h> -const char *get_system_type(void) -{ - return "CASIO CASSIOPEIA E-11/15/55/65"; -} - static int __init casio_e55_setup(void) { set_io_port_base(IO_PORT_BASE); diff --git a/arch/mips/vr41xx/common/Makefile b/arch/mips/vr41xx/common/Makefile index fa98ef3855bc..9096302a7ecc 100644 --- a/arch/mips/vr41xx/common/Makefile +++ b/arch/mips/vr41xx/common/Makefile @@ -2,7 +2,7 @@ # Makefile for common code of the NEC VR4100 series. # -obj-y += bcu.o cmu.o icu.o init.o int-handler.o pmu.o +obj-y += bcu.o cmu.o icu.o init.o int-handler.o irq.o pmu.o type.o obj-$(CONFIG_VRC4173) += vrc4173.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c index c842661144cb..0b73c5ab3c0c 100644 --- a/arch/mips/vr41xx/common/icu.c +++ b/arch/mips/vr41xx/common/icu.c @@ -3,8 +3,7 @@ * * Copyright (C) 2001-2002 MontaVista Software Inc. * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com> - * Copyright (C) 2003-2004 Yoichi Yuasa <yuasa@hh.iij4u.or.jp> - * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2003-2005 Yoichi Yuasa <yuasa@hh.iij4u.or.jp> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -31,7 +30,7 @@ */ #include <linux/errno.h> #include <linux/init.h> -#include <linux/interrupt.h> +#include <linux/ioport.h> #include <linux/irq.h> #include <linux/module.h> #include <linux/smp.h> @@ -39,34 +38,24 @@ #include <asm/cpu.h> #include <asm/io.h> -#include <asm/irq.h> -#include <asm/irq_cpu.h> #include <asm/vr41xx/vr41xx.h> -extern asmlinkage void vr41xx_handle_interrupt(void); - -extern void init_vr41xx_giuint_irq(void); -extern void giuint_irq_dispatch(struct pt_regs *regs); - -static uint32_t icu1_base; -static uint32_t icu2_base; - -static struct irqaction icu_cascade = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "cascade", -}; +static void __iomem *icu1_base; +static void __iomem *icu2_base; static unsigned char sysint1_assign[16] = { 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; static unsigned char sysint2_assign[16] = { - 2, 0, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; + 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; -#define SYSINT1REG_TYPE1 KSEG1ADDR(0x0b000080) -#define SYSINT2REG_TYPE1 KSEG1ADDR(0x0b000200) +#define ICU1_TYPE1_BASE 0x0b000080UL +#define ICU2_TYPE1_BASE 0x0b000200UL -#define SYSINT1REG_TYPE2 KSEG1ADDR(0x0f000080) -#define SYSINT2REG_TYPE2 KSEG1ADDR(0x0f0000a0) +#define ICU1_TYPE2_BASE 0x0f000080UL +#define ICU2_TYPE2_BASE 0x0f0000a0UL + +#define ICU1_SIZE 0x20 +#define ICU2_SIZE 0x1c #define SYSINT1REG 0x00 #define PIUINTREG 0x02 @@ -106,61 +95,61 @@ static unsigned char sysint2_assign[16] = { #define SYSINT1_IRQ_TO_PIN(x) ((x) - SYSINT1_IRQ_BASE) /* Pin 0-15 */ #define SYSINT2_IRQ_TO_PIN(x) ((x) - SYSINT2_IRQ_BASE) /* Pin 0-15 */ -#define read_icu1(offset) readw(icu1_base + (offset)) -#define write_icu1(val, offset) writew((val), icu1_base + (offset)) +#define INT_TO_IRQ(x) ((x) + 2) /* Int0-4 -> IRQ2-6 */ + +#define icu1_read(offset) readw(icu1_base + (offset)) +#define icu1_write(offset, value) writew((value), icu1_base + (offset)) -#define read_icu2(offset) readw(icu2_base + (offset)) -#define write_icu2(val, offset) writew((val), icu2_base + (offset)) +#define icu2_read(offset) readw(icu2_base + (offset)) +#define icu2_write(offset, value) writew((value), icu2_base + (offset)) #define INTASSIGN_MAX 4 #define INTASSIGN_MASK 0x0007 -static inline uint16_t set_icu1(uint8_t offset, uint16_t set) +static inline uint16_t icu1_set(uint8_t offset, uint16_t set) { - uint16_t res; + uint16_t data; - res = read_icu1(offset); - res |= set; - write_icu1(res, offset); + data = icu1_read(offset); + data |= set; + icu1_write(offset, data); - return res; + return data; } -static inline uint16_t clear_icu1(uint8_t offset, uint16_t clear) +static inline uint16_t icu1_clear(uint8_t offset, uint16_t clear) { - uint16_t res; + uint16_t data; - res = read_icu1(offset); - res &= ~clear; - write_icu1(res, offset); + data = icu1_read(offset); + data &= ~clear; + icu1_write(offset, data); - return res; + return data; } -static inline uint16_t set_icu2(uint8_t offset, uint16_t set) +static inline uint16_t icu2_set(uint8_t offset, uint16_t set) { - uint16_t res; + uint16_t data; - res = read_icu2(offset); - res |= set; - write_icu2(res, offset); + data = icu2_read(offset); + data |= set; + icu2_write(offset, data); - return res; + return data; } -static inline uint16_t clear_icu2(uint8_t offset, uint16_t clear) +static inline uint16_t icu2_clear(uint8_t offset, uint16_t clear) { - uint16_t res; + uint16_t data; - res = read_icu2(offset); - res &= ~clear; - write_icu2(res, offset); + data = icu2_read(offset); + data &= ~clear; + icu2_write(offset, data); - return res; + return data; } -/*=======================================================================*/ - void vr41xx_enable_piuint(uint16_t mask) { irq_desc_t *desc = irq_desc + PIU_IRQ; @@ -169,7 +158,7 @@ void vr41xx_enable_piuint(uint16_t mask) if (current_cpu_data.cputype == CPU_VR4111 || current_cpu_data.cputype == CPU_VR4121) { spin_lock_irqsave(&desc->lock, flags); - set_icu1(MPIUINTREG, mask); + icu1_set(MPIUINTREG, mask); spin_unlock_irqrestore(&desc->lock, flags); } } @@ -184,7 +173,7 @@ void vr41xx_disable_piuint(uint16_t mask) if (current_cpu_data.cputype == CPU_VR4111 || current_cpu_data.cputype == CPU_VR4121) { spin_lock_irqsave(&desc->lock, flags); - clear_icu1(MPIUINTREG, mask); + icu1_clear(MPIUINTREG, mask); spin_unlock_irqrestore(&desc->lock, flags); } } @@ -199,7 +188,7 @@ void vr41xx_enable_aiuint(uint16_t mask) if (current_cpu_data.cputype == CPU_VR4111 || current_cpu_data.cputype == CPU_VR4121) { spin_lock_irqsave(&desc->lock, flags); - set_icu1(MAIUINTREG, mask); + icu1_set(MAIUINTREG, mask); spin_unlock_irqrestore(&desc->lock, flags); } } @@ -214,7 +203,7 @@ void vr41xx_disable_aiuint(uint16_t mask) if (current_cpu_data.cputype == CPU_VR4111 || current_cpu_data.cputype == CPU_VR4121) { spin_lock_irqsave(&desc->lock, flags); - clear_icu1(MAIUINTREG, mask); + icu1_clear(MAIUINTREG, mask); spin_unlock_irqrestore(&desc->lock, flags); } } @@ -229,7 +218,7 @@ void vr41xx_enable_kiuint(uint16_t mask) if (current_cpu_data.cputype == CPU_VR4111 || current_cpu_data.cputype == CPU_VR4121) { spin_lock_irqsave(&desc->lock, flags); - set_icu1(MKIUINTREG, mask); + icu1_set(MKIUINTREG, mask); spin_unlock_irqrestore(&desc->lock, flags); } } @@ -244,7 +233,7 @@ void vr41xx_disable_kiuint(uint16_t mask) if (current_cpu_data.cputype == CPU_VR4111 || current_cpu_data.cputype == CPU_VR4121) { spin_lock_irqsave(&desc->lock, flags); - clear_icu1(MKIUINTREG, mask); + icu1_clear(MKIUINTREG, mask); spin_unlock_irqrestore(&desc->lock, flags); } } @@ -257,7 +246,7 @@ void vr41xx_enable_dsiuint(uint16_t mask) unsigned long flags; spin_lock_irqsave(&desc->lock, flags); - set_icu1(MDSIUINTREG, mask); + icu1_set(MDSIUINTREG, mask); spin_unlock_irqrestore(&desc->lock, flags); } @@ -269,7 +258,7 @@ void vr41xx_disable_dsiuint(uint16_t mask) unsigned long flags; spin_lock_irqsave(&desc->lock, flags); - clear_icu1(MDSIUINTREG, mask); + icu1_clear(MDSIUINTREG, mask); spin_unlock_irqrestore(&desc->lock, flags); } @@ -281,7 +270,7 @@ void vr41xx_enable_firint(uint16_t mask) unsigned long flags; spin_lock_irqsave(&desc->lock, flags); - set_icu2(MFIRINTREG, mask); + icu2_set(MFIRINTREG, mask); spin_unlock_irqrestore(&desc->lock, flags); } @@ -293,7 +282,7 @@ void vr41xx_disable_firint(uint16_t mask) unsigned long flags; spin_lock_irqsave(&desc->lock, flags); - clear_icu2(MFIRINTREG, mask); + icu2_clear(MFIRINTREG, mask); spin_unlock_irqrestore(&desc->lock, flags); } @@ -308,7 +297,7 @@ void vr41xx_enable_pciint(void) current_cpu_data.cputype == CPU_VR4131 || current_cpu_data.cputype == CPU_VR4133) { spin_lock_irqsave(&desc->lock, flags); - write_icu2(PCIINT0, MPCIINTREG); + icu2_write(MPCIINTREG, PCIINT0); spin_unlock_irqrestore(&desc->lock, flags); } } @@ -324,7 +313,7 @@ void vr41xx_disable_pciint(void) current_cpu_data.cputype == CPU_VR4131 || current_cpu_data.cputype == CPU_VR4133) { spin_lock_irqsave(&desc->lock, flags); - write_icu2(0, MPCIINTREG); + icu2_write(MPCIINTREG, 0); spin_unlock_irqrestore(&desc->lock, flags); } } @@ -340,7 +329,7 @@ void vr41xx_enable_scuint(void) current_cpu_data.cputype == CPU_VR4131 || current_cpu_data.cputype == CPU_VR4133) { spin_lock_irqsave(&desc->lock, flags); - write_icu2(SCUINT0, MSCUINTREG); + icu2_write(MSCUINTREG, SCUINT0); spin_unlock_irqrestore(&desc->lock, flags); } } @@ -356,7 +345,7 @@ void vr41xx_disable_scuint(void) current_cpu_data.cputype == CPU_VR4131 || current_cpu_data.cputype == CPU_VR4133) { spin_lock_irqsave(&desc->lock, flags); - write_icu2(0, MSCUINTREG); + icu2_write(MSCUINTREG, 0); spin_unlock_irqrestore(&desc->lock, flags); } } @@ -372,7 +361,7 @@ void vr41xx_enable_csiint(uint16_t mask) current_cpu_data.cputype == CPU_VR4131 || current_cpu_data.cputype == CPU_VR4133) { spin_lock_irqsave(&desc->lock, flags); - set_icu2(MCSIINTREG, mask); + icu2_set(MCSIINTREG, mask); spin_unlock_irqrestore(&desc->lock, flags); } } @@ -388,7 +377,7 @@ void vr41xx_disable_csiint(uint16_t mask) current_cpu_data.cputype == CPU_VR4131 || current_cpu_data.cputype == CPU_VR4133) { spin_lock_irqsave(&desc->lock, flags); - clear_icu2(MCSIINTREG, mask); + icu2_clear(MCSIINTREG, mask); spin_unlock_irqrestore(&desc->lock, flags); } } @@ -404,7 +393,7 @@ void vr41xx_enable_bcuint(void) current_cpu_data.cputype == CPU_VR4131 || current_cpu_data.cputype == CPU_VR4133) { spin_lock_irqsave(&desc->lock, flags); - write_icu2(BCUINTR, MBCUINTREG); + icu2_write(MBCUINTREG, BCUINTR); spin_unlock_irqrestore(&desc->lock, flags); } } @@ -420,30 +409,28 @@ void vr41xx_disable_bcuint(void) current_cpu_data.cputype == CPU_VR4131 || current_cpu_data.cputype == CPU_VR4133) { spin_lock_irqsave(&desc->lock, flags); - write_icu2(0, MBCUINTREG); + icu2_write(MBCUINTREG, 0); spin_unlock_irqrestore(&desc->lock, flags); } } EXPORT_SYMBOL(vr41xx_disable_bcuint); -/*=======================================================================*/ - static unsigned int startup_sysint1_irq(unsigned int irq) { - set_icu1(MSYSINT1REG, (uint16_t)1 << SYSINT1_IRQ_TO_PIN(irq)); + icu1_set(MSYSINT1REG, 1 << SYSINT1_IRQ_TO_PIN(irq)); return 0; /* never anything pending */ } static void shutdown_sysint1_irq(unsigned int irq) { - clear_icu1(MSYSINT1REG, (uint16_t)1 << SYSINT1_IRQ_TO_PIN(irq)); + icu1_clear(MSYSINT1REG, 1 << SYSINT1_IRQ_TO_PIN(irq)); } static void enable_sysint1_irq(unsigned int irq) { - set_icu1(MSYSINT1REG, (uint16_t)1 << SYSINT1_IRQ_TO_PIN(irq)); + icu1_set(MSYSINT1REG, 1 << SYSINT1_IRQ_TO_PIN(irq)); } #define disable_sysint1_irq shutdown_sysint1_irq @@ -452,7 +439,7 @@ static void enable_sysint1_irq(unsigned int irq) static void end_sysint1_irq(unsigned int irq) { if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - set_icu1(MSYSINT1REG, (uint16_t)1 << SYSINT1_IRQ_TO_PIN(irq)); + icu1_set(MSYSINT1REG, 1 << SYSINT1_IRQ_TO_PIN(irq)); } static struct hw_interrupt_type sysint1_irq_type = { @@ -465,23 +452,21 @@ static struct hw_interrupt_type sysint1_irq_type = { .end = end_sysint1_irq, }; -/*=======================================================================*/ - static unsigned int startup_sysint2_irq(unsigned int irq) { - set_icu2(MSYSINT2REG, (uint16_t)1 << SYSINT2_IRQ_TO_PIN(irq)); + icu2_set(MSYSINT2REG, 1 << SYSINT2_IRQ_TO_PIN(irq)); return 0; /* never anything pending */ } static void shutdown_sysint2_irq(unsigned int irq) { - clear_icu2(MSYSINT2REG, (uint16_t)1 << SYSINT2_IRQ_TO_PIN(irq)); + icu2_clear(MSYSINT2REG, 1 << SYSINT2_IRQ_TO_PIN(irq)); } static void enable_sysint2_irq(unsigned int irq) { - set_icu2(MSYSINT2REG, (uint16_t)1 << SYSINT2_IRQ_TO_PIN(irq)); + icu2_set(MSYSINT2REG, 1 << SYSINT2_IRQ_TO_PIN(irq)); } #define disable_sysint2_irq shutdown_sysint2_irq @@ -490,7 +475,7 @@ static void enable_sysint2_irq(unsigned int irq) static void end_sysint2_irq(unsigned int irq) { if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - set_icu2(MSYSINT2REG, (uint16_t)1 << SYSINT2_IRQ_TO_PIN(irq)); + icu2_set(MSYSINT2REG, 1 << SYSINT2_IRQ_TO_PIN(irq)); } static struct hw_interrupt_type sysint2_irq_type = { @@ -503,8 +488,6 @@ static struct hw_interrupt_type sysint2_irq_type = { .end = end_sysint2_irq, }; -/*=======================================================================*/ - static inline int set_sysint1_assign(unsigned int irq, unsigned char assign) { irq_desc_t *desc = irq_desc + irq; @@ -515,8 +498,8 @@ static inline int set_sysint1_assign(unsigned int irq, unsigned char assign) spin_lock_irq(&desc->lock); - intassign0 = read_icu1(INTASSIGN0); - intassign1 = read_icu1(INTASSIGN1); + intassign0 = icu1_read(INTASSIGN0); + intassign1 = icu1_read(INTASSIGN1); switch (pin) { case 0: @@ -556,8 +539,8 @@ static inline int set_sysint1_assign(unsigned int irq, unsigned char assign) } sysint1_assign[pin] = assign; - write_icu1(intassign0, INTASSIGN0); - write_icu1(intassign1, INTASSIGN1); + icu1_write(INTASSIGN0, intassign0); + icu1_write(INTASSIGN1, intassign1); spin_unlock_irq(&desc->lock); @@ -574,8 +557,8 @@ static inline int set_sysint2_assign(unsigned int irq, unsigned char assign) spin_lock_irq(&desc->lock); - intassign2 = read_icu1(INTASSIGN2); - intassign3 = read_icu1(INTASSIGN3); + intassign2 = icu1_read(INTASSIGN2); + intassign3 = icu1_read(INTASSIGN3); switch (pin) { case 0: @@ -623,8 +606,8 @@ static inline int set_sysint2_assign(unsigned int irq, unsigned char assign) } sysint2_assign[pin] = assign; - write_icu1(intassign2, INTASSIGN2); - write_icu1(intassign3, INTASSIGN3); + icu1_write(INTASSIGN2, intassign2); + icu1_write(INTASSIGN3, intassign3); spin_unlock_irq(&desc->lock); @@ -651,88 +634,92 @@ int vr41xx_set_intassign(unsigned int irq, unsigned char intassign) EXPORT_SYMBOL(vr41xx_set_intassign); -/*=======================================================================*/ - -asmlinkage void irq_dispatch(unsigned char intnum, struct pt_regs *regs) +static int icu_get_irq(unsigned int irq, struct pt_regs *regs) { uint16_t pend1, pend2; uint16_t mask1, mask2; int i; - pend1 = read_icu1(SYSINT1REG); - mask1 = read_icu1(MSYSINT1REG); + pend1 = icu1_read(SYSINT1REG); + mask1 = icu1_read(MSYSINT1REG); - pend2 = read_icu2(SYSINT2REG); - mask2 = read_icu2(MSYSINT2REG); + pend2 = icu2_read(SYSINT2REG); + mask2 = icu2_read(MSYSINT2REG); mask1 &= pend1; mask2 &= pend2; if (mask1) { for (i = 0; i < 16; i++) { - if (intnum == sysint1_assign[i] && - (mask1 & ((uint16_t)1 << i))) { - if (i == 8) - giuint_irq_dispatch(regs); - else - do_IRQ(SYSINT1_IRQ(i), regs); - return; - } + if (irq == INT_TO_IRQ(sysint1_assign[i]) && (mask1 & (1 << i))) + return SYSINT1_IRQ(i); } } if (mask2) { for (i = 0; i < 16; i++) { - if (intnum == sysint2_assign[i] && - (mask2 & ((uint16_t)1 << i))) { - do_IRQ(SYSINT2_IRQ(i), regs); - return; - } + if (irq == INT_TO_IRQ(sysint2_assign[i]) && (mask2 & (1 << i))) + return SYSINT2_IRQ(i); } } printk(KERN_ERR "spurious ICU interrupt: %04x,%04x\n", pend1, pend2); atomic_inc(&irq_err_count); -} -/*=======================================================================*/ + return -1; +} static int __init vr41xx_icu_init(void) { + unsigned long icu1_start, icu2_start; + int i; + switch (current_cpu_data.cputype) { case CPU_VR4111: case CPU_VR4121: - icu1_base = SYSINT1REG_TYPE1; - icu2_base = SYSINT2REG_TYPE1; + icu1_start = ICU1_TYPE1_BASE; + icu2_start = ICU2_TYPE1_BASE; break; case CPU_VR4122: case CPU_VR4131: case CPU_VR4133: - icu1_base = SYSINT1REG_TYPE2; - icu2_base = SYSINT2REG_TYPE2; + icu1_start = ICU1_TYPE2_BASE; + icu2_start = ICU2_TYPE2_BASE; break; default: printk(KERN_ERR "ICU: Unexpected CPU of NEC VR4100 series\n"); - return -EINVAL; + return -ENODEV; } - write_icu1(0, MSYSINT1REG); - write_icu1(0xffff, MGIUINTLREG); + if (request_mem_region(icu1_start, ICU1_SIZE, "ICU") == NULL) + return -EBUSY; - write_icu2(0, MSYSINT2REG); - write_icu2(0xffff, MGIUINTHREG); + if (request_mem_region(icu2_start, ICU2_SIZE, "ICU") == NULL) { + release_mem_region(icu1_start, ICU1_SIZE); + return -EBUSY; + } - return 0; -} + icu1_base = ioremap(icu1_start, ICU1_SIZE); + if (icu1_base == NULL) { + release_mem_region(icu1_start, ICU1_SIZE); + release_mem_region(icu2_start, ICU2_SIZE); + return -ENOMEM; + } -early_initcall(vr41xx_icu_init); + icu2_base = ioremap(icu2_start, ICU2_SIZE); + if (icu2_base == NULL) { + iounmap(icu1_base); + release_mem_region(icu1_start, ICU1_SIZE); + release_mem_region(icu2_start, ICU2_SIZE); + return -ENOMEM; + } -/*=======================================================================*/ + icu1_write(MSYSINT1REG, 0); + icu1_write(MGIUINTLREG, 0xffff); -static inline void init_vr41xx_icu_irq(void) -{ - int i; + icu2_write(MSYSINT2REG, 0); + icu2_write(MGIUINTHREG, 0xffff); for (i = SYSINT1_IRQ_BASE; i <= SYSINT1_IRQ_LAST; i++) irq_desc[i].handler = &sysint1_irq_type; @@ -740,18 +727,13 @@ static inline void init_vr41xx_icu_irq(void) for (i = SYSINT2_IRQ_BASE; i <= SYSINT2_IRQ_LAST; i++) irq_desc[i].handler = &sysint2_irq_type; - setup_irq(INT0_CASCADE_IRQ, &icu_cascade); - setup_irq(INT1_CASCADE_IRQ, &icu_cascade); - setup_irq(INT2_CASCADE_IRQ, &icu_cascade); - setup_irq(INT3_CASCADE_IRQ, &icu_cascade); - setup_irq(INT4_CASCADE_IRQ, &icu_cascade); -} + cascade_irq(INT0_IRQ, icu_get_irq); + cascade_irq(INT1_IRQ, icu_get_irq); + cascade_irq(INT2_IRQ, icu_get_irq); + cascade_irq(INT3_IRQ, icu_get_irq); + cascade_irq(INT4_IRQ, icu_get_irq); -void __init arch_init_irq(void) -{ - mips_cpu_irq_init(MIPS_CPU_IRQ_BASE); - init_vr41xx_icu_irq(); - init_vr41xx_giuint_irq(); - - set_except_vector(0, vr41xx_handle_interrupt); + return 0; } + +core_initcall(vr41xx_icu_init); diff --git a/arch/mips/vr41xx/common/int-handler.S b/arch/mips/vr41xx/common/int-handler.S index 38ff89b505f2..272c13aee4fd 100644 --- a/arch/mips/vr41xx/common/int-handler.S +++ b/arch/mips/vr41xx/common/int-handler.S @@ -71,24 +71,24 @@ andi t1, t0, CAUSEF_IP3 # check for Int1 bnez t1, handle_int - li a0, 1 + li a0, 3 andi t1, t0, CAUSEF_IP4 # check for Int2 bnez t1, handle_int - li a0, 2 + li a0, 4 andi t1, t0, CAUSEF_IP5 # check for Int3 bnez t1, handle_int - li a0, 3 + li a0, 5 andi t1, t0, CAUSEF_IP6 # check for Int4 bnez t1, handle_int - li a0, 4 + li a0, 6 1: andi t1, t0, CAUSEF_IP2 # check for Int0 bnez t1, handle_int - li a0, 0 + li a0, 2 andi t1, t0, CAUSEF_IP0 # check for IP0 bnez t1, handle_irq diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c new file mode 100644 index 000000000000..43b214d39438 --- /dev/null +++ b/arch/mips/vr41xx/common/irq.c @@ -0,0 +1,94 @@ +/* + * Interrupt handing routines for NEC VR4100 series. + * + * Copyright (C) 2005 Yoichi Yuasa <yuasa@hh.iij4u.or.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/interrupt.h> +#include <linux/module.h> + +#include <asm/irq_cpu.h> +#include <asm/system.h> +#include <asm/vr41xx/vr41xx.h> + +typedef struct irq_cascade { + int (*get_irq)(unsigned int, struct pt_regs *); +} irq_cascade_t; + +static irq_cascade_t irq_cascade[NR_IRQS] __cacheline_aligned; + +static struct irqaction cascade_irqaction = { + .handler = no_action, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; + +int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int, struct pt_regs *)) +{ + int retval = 0; + + if (irq >= NR_IRQS) + return -EINVAL; + + if (irq_cascade[irq].get_irq != NULL) + free_irq(irq, NULL); + + irq_cascade[irq].get_irq = get_irq; + + if (get_irq != NULL) { + retval = setup_irq(irq, &cascade_irqaction); + if (retval < 0) + irq_cascade[irq].get_irq = NULL; + } + + return retval; +} + +EXPORT_SYMBOL_GPL(cascade_irq); + +asmlinkage void irq_dispatch(unsigned int irq, struct pt_regs *regs) +{ + irq_cascade_t *cascade; + irq_desc_t *desc; + + if (irq >= NR_IRQS) { + atomic_inc(&irq_err_count); + return; + } + + cascade = irq_cascade + irq; + if (cascade->get_irq != NULL) { + unsigned int source_irq = irq; + desc = irq_desc + source_irq; + desc->handler->ack(source_irq); + irq = cascade->get_irq(irq, regs); + if (irq < 0) + atomic_inc(&irq_err_count); + else + irq_dispatch(irq, regs); + desc->handler->end(source_irq); + } else + do_IRQ(irq, regs); +} + +extern asmlinkage void vr41xx_handle_interrupt(void); + +void __init arch_init_irq(void) +{ + mips_cpu_irq_init(MIPS_CPU_IRQ_BASE); + + set_except_vector(0, vr41xx_handle_interrupt); +} diff --git a/arch/mips/vr41xx/tanbac-tb0226/setup.c b/arch/mips/vr41xx/common/type.c index 60027e5dea25..bcb5f71b5026 100644 --- a/arch/mips/vr41xx/tanbac-tb0226/setup.c +++ b/arch/mips/vr41xx/common/type.c @@ -1,7 +1,7 @@ /* - * setup.c, Setup for the TANBAC TB0226. + * type.c, System type for NEC VR4100 series. * - * Copyright (C) 2002-2005 Yoichi Yuasa <yuasa@hh.iij4u.or.jp> + * Copyright (C) 2005 Yoichi Yuasa <yuasa@hh.iij4u.or.jp> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -20,5 +20,5 @@ const char *get_system_type(void) { - return "TANBAC TB0226"; + return "NEC VR4100 series"; } diff --git a/arch/mips/vr41xx/common/vrc4173.c b/arch/mips/vr41xx/common/vrc4173.c index 5475dd72e264..ba58764ef8ea 100644 --- a/arch/mips/vr41xx/common/vrc4173.c +++ b/arch/mips/vr41xx/common/vrc4173.c @@ -476,7 +476,7 @@ static inline int vrc4173_icu_init(int cascade_irq) if (cascade_irq < GIU_IRQ(0) || cascade_irq > GIU_IRQ(15)) return -EINVAL; - + vrc4173_outw(0, VRC4173_MSYSINT1REG); vr41xx_set_irq_trigger(GIU_IRQ_TO_PIN(cascade_irq), TRIGGER_LEVEL, SIGNAL_THROUGH); diff --git a/arch/mips/vr41xx/ibm-workpad/setup.c b/arch/mips/vr41xx/ibm-workpad/setup.c index cff44602d3d4..e4b34ad6ea61 100644 --- a/arch/mips/vr41xx/ibm-workpad/setup.c +++ b/arch/mips/vr41xx/ibm-workpad/setup.c @@ -23,11 +23,6 @@ #include <asm/io.h> #include <asm/vr41xx/workpad.h> -const char *get_system_type(void) -{ - return "IBM WorkPad z50"; -} - static int __init ibm_workpad_setup(void) { set_io_port_base(IO_PORT_BASE); diff --git a/arch/mips/vr41xx/nec-cmbvr4133/init.c b/arch/mips/vr41xx/nec-cmbvr4133/init.c index 87f06b3f5a9c..be590edb0b83 100644 --- a/arch/mips/vr41xx/nec-cmbvr4133/init.c +++ b/arch/mips/vr41xx/nec-cmbvr4133/init.c @@ -16,11 +16,6 @@ * Manish Lachwani (mlachwani@mvista.com) */ #include <linux/config.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/string.h> - -#include <asm/bootinfo.h> #ifdef CONFIG_ROCKHOPPER #include <asm/io.h> @@ -28,14 +23,7 @@ #define PCICONFDREG 0xaf000c14 #define PCICONFAREG 0xaf000c18 -#endif - -const char *get_system_type(void) -{ - return "NEC CMB-VR4133"; -} -#ifdef CONFIG_ROCKHOPPER void disable_pcnet(void) { u32 data; diff --git a/arch/mips/vr41xx/tanbac-tb0226/Makefile b/arch/mips/vr41xx/tanbac-tb0226/Makefile deleted file mode 100644 index 372f953d240b..000000000000 --- a/arch/mips/vr41xx/tanbac-tb0226/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the TANBAC TB0226 specific parts of the kernel -# - -obj-y += setup.o diff --git a/arch/mips/vr41xx/tanbac-tb0229/Makefile b/arch/mips/vr41xx/tanbac-tb0229/Makefile deleted file mode 100644 index 9c6b864ef2ef..000000000000 --- a/arch/mips/vr41xx/tanbac-tb0229/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the TANBAC TB0229(VR4131DIMM) specific parts of the kernel -# - -obj-y := setup.o diff --git a/arch/mips/vr41xx/tanbac-tb0229/setup.c b/arch/mips/vr41xx/tanbac-tb0229/setup.c deleted file mode 100644 index 5c1b757bfb0c..000000000000 --- a/arch/mips/vr41xx/tanbac-tb0229/setup.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * setup.c, Setup for the TANBAC TB0229 (VR4131DIMM) - * - * Copyright (C) 2002-2005 Yoichi Yuasa <yuasa@hh.iij4u.or.jp> - * - * Modified for TANBAC TB0229: - * Copyright (C) 2003 Megasolution Inc. <matsu@megasolution.jp> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -const char *get_system_type(void) -{ - return "TANBAC TB0229"; -} diff --git a/arch/mips/vr41xx/victor-mpc30x/Makefile b/arch/mips/vr41xx/victor-mpc30x/Makefile deleted file mode 100644 index a2e8086a31a6..000000000000 --- a/arch/mips/vr41xx/victor-mpc30x/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the Victor MP-C303/304 specific parts of the kernel -# - -obj-y += setup.o diff --git a/arch/mips/vr41xx/victor-mpc30x/setup.c b/arch/mips/vr41xx/victor-mpc30x/setup.c deleted file mode 100644 index f591e36726e6..000000000000 --- a/arch/mips/vr41xx/victor-mpc30x/setup.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * setup.c, Setup for the Victor MP-C303/304. - * - * Copyright (C) 2002-2005 Yoichi Yuasa <yuasa@hh.iij4u.or.jp> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -const char *get_system_type(void) -{ - return "Victor MP-C303/304"; -} diff --git a/arch/mips/vr41xx/zao-capcella/Makefile b/arch/mips/vr41xx/zao-capcella/Makefile deleted file mode 100644 index cf420197cd23..000000000000 --- a/arch/mips/vr41xx/zao-capcella/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the ZAO Networks Capcella specific parts of the kernel -# - -obj-y += setup.o diff --git a/arch/mips/vr41xx/zao-capcella/setup.c b/arch/mips/vr41xx/zao-capcella/setup.c deleted file mode 100644 index 17bade241fe2..000000000000 --- a/arch/mips/vr41xx/zao-capcella/setup.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * setup.c, Setup for the ZAO Networks Capcella. - * - * Copyright (C) 2002-2005 Yoichi Yuasa <yuasa@hh.iij4u.or.jp> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -const char *get_system_type(void) -{ - return "ZAO Networks Capcella"; -} diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 1c2d87435233..0b07922a2ac6 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -49,6 +49,10 @@ config ISA_DMA_API bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + default y + source "init/Kconfig" diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 0403d2fcb85e..3b339b1cce13 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -100,15 +100,7 @@ kernel_install: vmlinux install: kernel_install modules_install -prepare: include/asm-parisc/offsets.h - -arch/parisc/kernel/asm-offsets.s: include/asm include/linux/version.h \ - include/config/MARKER - -include/asm-parisc/offsets.h: arch/parisc/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) - -CLEAN_FILES += lifimage include/asm-parisc/offsets.h +CLEAN_FILES += lifimage MRPROPER_FILES += palo.conf define archhelp diff --git a/arch/parisc/hpux/gate.S b/arch/parisc/hpux/gate.S index 2680a1c0fa77..aaaf3306c05a 100644 --- a/arch/parisc/hpux/gate.S +++ b/arch/parisc/hpux/gate.S @@ -9,7 +9,7 @@ */ #include <asm/assembly.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/unistd.h> #include <asm/errno.h> diff --git a/arch/parisc/hpux/wrappers.S b/arch/parisc/hpux/wrappers.S index 1aa936dfe147..0b0c3a66b1be 100644 --- a/arch/parisc/hpux/wrappers.S +++ b/arch/parisc/hpux/wrappers.S @@ -24,7 +24,7 @@ #warning PA64 support needs more work...did first cut #endif -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/assembly.h> #include <asm/signal.h> diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index ee58d37dbb27..be0f07f2fa58 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -23,7 +23,7 @@ */ #include <linux/config.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> /* we have the following possibilities to act on an interruption: * - handle in assembly and use shadowed registers only diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index ddf7e914f15e..28405edf8448 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -14,7 +14,7 @@ #include <linux/autoconf.h> /* for CONFIG_SMP */ -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/psw.h> #include <asm/pdc.h> diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index 4fc04501d5e5..46b759385115 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -47,7 +47,7 @@ #include <linux/kallsyms.h> #include <asm/io.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/pdc.h> #include <asm/pdc_chassis.h> #include <asm/pgalloc.h> diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c index c07db9dff7cd..f3428e5e86fb 100644 --- a/arch/parisc/kernel/ptrace.c +++ b/arch/parisc/kernel/ptrace.c @@ -23,7 +23,7 @@ #include <asm/pgtable.h> #include <asm/system.h> #include <asm/processor.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> /* PSW bits we allow the debugger to modify */ #define USER_PSW_BITS (PSW_N | PSW_V | PSW_CB) diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 9421bb98ea63..0224651fd8f1 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -32,7 +32,7 @@ #include <asm/uaccess.h> #include <asm/pgalloc.h> #include <asm/cacheflush.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #ifdef CONFIG_COMPAT #include <linux/compat.h> @@ -517,13 +517,12 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, if (!setup_rt_frame(sig, ka, info, oldset, regs, in_syscall)) return 0; - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); return 1; } diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index 32ea701f4d20..8c7a7185cd3b 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -7,7 +7,7 @@ * sorry about the wall, puffin.. */ -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/unistd.h> #include <asm/errno.h> #include <asm/psw.h> diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index 6cf7407344ba..7ff67f8e9f8c 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -188,10 +188,7 @@ do_settimeofday (struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); } write_sequnlock_irq(&xtime_lock); clock_was_set(); diff --git a/arch/parisc/lib/Makefile b/arch/parisc/lib/Makefile index 7bf705676297..5f2e6904d14a 100644 --- a/arch/parisc/lib/Makefile +++ b/arch/parisc/lib/Makefile @@ -5,5 +5,3 @@ lib-y := lusercopy.o bitops.o checksum.o io.o memset.o fixup.o memcpy.o obj-y := iomap.o - -lib-$(CONFIG_SMP) += debuglocks.o diff --git a/arch/parisc/lib/bitops.c b/arch/parisc/lib/bitops.c index 2de182f6fe8a..90f400b10282 100644 --- a/arch/parisc/lib/bitops.c +++ b/arch/parisc/lib/bitops.c @@ -13,8 +13,8 @@ #include <asm/atomic.h> #ifdef CONFIG_SMP -spinlock_t __atomic_hash[ATOMIC_HASH_SIZE] __lock_aligned = { - [0 ... (ATOMIC_HASH_SIZE-1)] = SPIN_LOCK_UNLOCKED +raw_spinlock_t __atomic_hash[ATOMIC_HASH_SIZE] __lock_aligned = { + [0 ... (ATOMIC_HASH_SIZE-1)] = __RAW_SPIN_LOCK_UNLOCKED }; #endif diff --git a/arch/parisc/lib/debuglocks.c b/arch/parisc/lib/debuglocks.c deleted file mode 100644 index 1b33fe6e5b7a..000000000000 --- a/arch/parisc/lib/debuglocks.c +++ /dev/null @@ -1,277 +0,0 @@ -/* - * Debugging versions of SMP locking primitives. - * - * Copyright (C) 2004 Thibaut VARENE <varenet@parisc-linux.org> - * - * Some code stollen from alpha & sparc64 ;) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * We use pdc_printf() throughout the file for all output messages, to avoid - * losing messages because of disabled interrupts. Since we're using these - * messages for debugging purposes, it makes sense not to send them to the - * linux console. - */ - - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/hardirq.h> /* in_interrupt() */ -#include <asm/system.h> -#include <asm/hardirq.h> /* in_interrupt() */ -#include <asm/pdc.h> - -#undef INIT_STUCK -#define INIT_STUCK 1L << 30 - -#ifdef CONFIG_DEBUG_SPINLOCK - - -void _dbg_spin_lock(spinlock_t * lock, const char *base_file, int line_no) -{ - volatile unsigned int *a; - long stuck = INIT_STUCK; - void *inline_pc = __builtin_return_address(0); - unsigned long started = jiffies; - int printed = 0; - int cpu = smp_processor_id(); - -try_again: - - /* Do the actual locking */ - /* <T-Bone> ggg: we can't get stuck on the outter loop? - * <ggg> T-Bone: We can hit the outer loop - * alot if multiple CPUs are constantly racing for a lock - * and the backplane is NOT fair about which CPU sees - * the update first. But it won't hang since every failed - * attempt will drop us back into the inner loop and - * decrement `stuck'. - * <ggg> K-class and some of the others are NOT fair in the HW - * implementation so we could see false positives. - * But fixing the lock contention is easier than - * fixing the HW to be fair. - * <tausq> __ldcw() returns 1 if we get the lock; otherwise we - * spin until the value of the lock changes, or we time out. - */ - mb(); - a = __ldcw_align(lock); - while (stuck && (__ldcw(a) == 0)) - while ((*a == 0) && --stuck); - mb(); - - if (unlikely(stuck <= 0)) { - pdc_printf( - "%s:%d: spin_lock(%s/%p) stuck in %s at %p(%d)" - " owned by %s:%d in %s at %p(%d)\n", - base_file, line_no, lock->module, lock, - current->comm, inline_pc, cpu, - lock->bfile, lock->bline, lock->task->comm, - lock->previous, lock->oncpu); - stuck = INIT_STUCK; - printed = 1; - goto try_again; - } - - /* Exiting. Got the lock. */ - lock->oncpu = cpu; - lock->previous = inline_pc; - lock->task = current; - lock->bfile = (char *)base_file; - lock->bline = line_no; - - if (unlikely(printed)) { - pdc_printf( - "%s:%d: spin_lock grabbed in %s at %p(%d) %ld ticks\n", - base_file, line_no, current->comm, inline_pc, - cpu, jiffies - started); - } -} - -void _dbg_spin_unlock(spinlock_t * lock, const char *base_file, int line_no) -{ - CHECK_LOCK(lock); - volatile unsigned int *a; - mb(); - a = __ldcw_align(lock); - if (unlikely((*a != 0) && lock->babble)) { - lock->babble--; - pdc_printf( - "%s:%d: spin_unlock(%s:%p) not locked\n", - base_file, line_no, lock->module, lock); - } - *a = 1; - mb(); -} - -int _dbg_spin_trylock(spinlock_t * lock, const char *base_file, int line_no) -{ - int ret; - volatile unsigned int *a; - mb(); - a = __ldcw_align(lock); - ret = (__ldcw(a) != 0); - mb(); - if (ret) { - lock->oncpu = smp_processor_id(); - lock->previous = __builtin_return_address(0); - lock->task = current; - } else { - lock->bfile = (char *)base_file; - lock->bline = line_no; - } - return ret; -} - -#endif /* CONFIG_DEBUG_SPINLOCK */ - -#ifdef CONFIG_DEBUG_RWLOCK - -/* Interrupts trouble detailed explanation, thx Grant: - * - * o writer (wants to modify data) attempts to acquire the rwlock - * o He gets the write lock. - * o Interupts are still enabled, we take an interrupt with the - * write still holding the lock. - * o interrupt handler tries to acquire the rwlock for read. - * o deadlock since the writer can't release it at this point. - * - * In general, any use of spinlocks that competes between "base" - * level and interrupt level code will risk deadlock. Interrupts - * need to be disabled in the base level routines to avoid it. - * Or more precisely, only the IRQ the base level routine - * is competing with for the lock. But it's more efficient/faster - * to just disable all interrupts on that CPU to guarantee - * once it gets the lock it can release it quickly too. - */ - -void _dbg_write_lock(rwlock_t *rw, const char *bfile, int bline) -{ - void *inline_pc = __builtin_return_address(0); - unsigned long started = jiffies; - long stuck = INIT_STUCK; - int printed = 0; - int cpu = smp_processor_id(); - - if(unlikely(in_interrupt())) { /* acquiring write lock in interrupt context, bad idea */ - pdc_printf("write_lock caller: %s:%d, IRQs enabled,\n", bfile, bline); - BUG(); - } - - /* Note: if interrupts are disabled (which is most likely), the printk - will never show on the console. We might need a polling method to flush - the dmesg buffer anyhow. */ - -retry: - _raw_spin_lock(&rw->lock); - - if(rw->counter != 0) { - /* this basically never happens */ - _raw_spin_unlock(&rw->lock); - - stuck--; - if ((unlikely(stuck <= 0)) && (rw->counter < 0)) { - pdc_printf( - "%s:%d: write_lock stuck on writer" - " in %s at %p(%d) %ld ticks\n", - bfile, bline, current->comm, inline_pc, - cpu, jiffies - started); - stuck = INIT_STUCK; - printed = 1; - } - else if (unlikely(stuck <= 0)) { - pdc_printf( - "%s:%d: write_lock stuck on reader" - " in %s at %p(%d) %ld ticks\n", - bfile, bline, current->comm, inline_pc, - cpu, jiffies - started); - stuck = INIT_STUCK; - printed = 1; - } - - while(rw->counter != 0); - - goto retry; - } - - /* got it. now leave without unlocking */ - rw->counter = -1; /* remember we are locked */ - - if (unlikely(printed)) { - pdc_printf( - "%s:%d: write_lock grabbed in %s at %p(%d) %ld ticks\n", - bfile, bline, current->comm, inline_pc, - cpu, jiffies - started); - } -} - -int _dbg_write_trylock(rwlock_t *rw, const char *bfile, int bline) -{ -#if 0 - void *inline_pc = __builtin_return_address(0); - int cpu = smp_processor_id(); -#endif - - if(unlikely(in_interrupt())) { /* acquiring write lock in interrupt context, bad idea */ - pdc_printf("write_lock caller: %s:%d, IRQs enabled,\n", bfile, bline); - BUG(); - } - - /* Note: if interrupts are disabled (which is most likely), the printk - will never show on the console. We might need a polling method to flush - the dmesg buffer anyhow. */ - - _raw_spin_lock(&rw->lock); - - if(rw->counter != 0) { - /* this basically never happens */ - _raw_spin_unlock(&rw->lock); - return 0; - } - - /* got it. now leave without unlocking */ - rw->counter = -1; /* remember we are locked */ -#if 0 - pdc_printf("%s:%d: try write_lock grabbed in %s at %p(%d)\n", - bfile, bline, current->comm, inline_pc, cpu); -#endif - return 1; -} - -void _dbg_read_lock(rwlock_t * rw, const char *bfile, int bline) -{ -#if 0 - void *inline_pc = __builtin_return_address(0); - unsigned long started = jiffies; - int cpu = smp_processor_id(); -#endif - unsigned long flags; - - local_irq_save(flags); - _raw_spin_lock(&rw->lock); - - rw->counter++; -#if 0 - pdc_printf( - "%s:%d: read_lock grabbed in %s at %p(%d) %ld ticks\n", - bfile, bline, current->comm, inline_pc, - cpu, jiffies - started); -#endif - _raw_spin_unlock(&rw->lock); - local_irq_restore(flags); -} - -#endif /* CONFIG_DEBUG_RWLOCK */ diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S index 134f0cd240f5..1b91612ed964 100644 --- a/arch/parisc/lib/fixup.S +++ b/arch/parisc/lib/fixup.S @@ -20,7 +20,7 @@ * Fixup routines for kernel exception handling. */ #include <linux/config.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/assembly.h> #include <asm/errno.h> diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c index 89fe0ceeaa40..2ca9ec7ec3a7 100644 --- a/arch/ppc/8xx_io/cs4218_tdm.c +++ b/arch/ppc/8xx_io/cs4218_tdm.c @@ -1380,7 +1380,7 @@ static void cs_nosound(unsigned long xx) spin_unlock_irqrestore(&cs4218_lock, flags); } -static struct timer_list beep_timer = TIMER_INITIALIZER(cs_nosound, 0, 0); +static DEFINE_TIMER(beep_timer, cs_nosound, 0, 0); }; static void cs_mksound(unsigned int hz, unsigned int ticks) diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index e6fa1d1cc03a..347ea284140b 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -47,6 +47,10 @@ config SCHED_NO_NO_OMIT_FRAME_POINTER bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + default y + source "init/Kconfig" menu "Processor" @@ -261,6 +265,15 @@ config PPC601_SYNC_FIX If in doubt, say Y here. +config HOTPLUG_CPU + bool "Support for enabling/disabling CPUs" + depends on SMP && HOTPLUG && EXPERIMENTAL && PPC_PMAC + ---help--- + Say Y here to be able to disable and re-enable individual + CPUs at runtime on SMP machines. + + Say N if you are unsure. + source arch/ppc/platforms/4xx/Kconfig source arch/ppc/platforms/85xx/Kconfig @@ -330,14 +343,6 @@ config RPXLITE End of life: end 2000 ? URL: see TQM850L - SPD823TS: - MPC823 based board used in the "Tele Server" product - Manufacturer: Speech Design, <http://www.speech-design.de/> - Date of Release: Mid 2000 (?) - End of life: - - URL: <http://www.speech-design.de/> - select "English", then "Teleteam Solutions", then "TeleServer" - IVMS8: MPC860 based board used in the "Integrated Voice Mail System", Small Version (8 voice channels) @@ -354,13 +359,6 @@ config RPXLITE End of life: - URL: <http://www.speech-design.de/> - SM850: - Service Module (based on TQM850L) - Manufacturer: Dependable Computer Systems, <http://www.decomsys.com/> - Date of Release: end 2000 (?) - End of life: mid 2001 (?) - URL: <http://www.tz-mikroelektronik.de/ServiceModule/index.html> - HERMES: Hermes-Pro ISDN/LAN router with integrated 8 x hub Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik @@ -464,13 +462,6 @@ config TQM860L config FPS850L bool "FPS850L" -config SPD823TS - bool "SPD823TS" - help - Say Y here to support the Speech Design 823 Tele-Server from Speech - Design, released in 2000. The manufacturer's website is at - <http://www.speech-design.de/>. - config IVMS8 bool "IVMS8" help @@ -485,14 +476,6 @@ config IVML24 from Speech Design, released March 2001. The manufacturer's website is at <http://www.speech-design.de/>. -config SM850 - bool "SM850" - help - Say Y here to support the Service Module 850 from Dependable - Computer Systems, an SBC based on the TQM850L module by TQ - Components. This board is no longer in production. The - manufacturer's website is at <http://www.decomsys.com/>. - config HERMES_PRO bool "HERMES" @@ -578,9 +561,6 @@ config CPCI690 help Select CPCI690 if configuring a Force CPCI690 cPCI board. -config PCORE - bool "Force-PowerCore" - config POWERPMC250 bool "Force-PowerPMC250" @@ -613,9 +593,6 @@ config EV64260 config LOPEC bool "Motorola-LoPEC" -config MCPN765 - bool "Motorola-MCPN765" - config MVME5100 bool "Motorola-MVME5100" @@ -637,12 +614,6 @@ config SANDPOINT config RADSTONE_PPC7D bool "Radstone Technology PPC7D board" -config ADIR - bool "SBS-Adirondack" - -config K2 - bool "SBS-K2" - config PAL4 bool "SBS-Palomar4" @@ -713,6 +684,16 @@ config MPC834x_SYS help This option enables support for the MPC 834x SYS evaluation board. + Be aware that PCI buses can only function when SYS board is plugged + into the PIB (Platform IO Board) board from Freescale which provide + 3 PCI slots. The PIBs PCI initialization is the bootloader's + responsiblilty. + +config EV64360 + bool "Marvell-EV64360BP" + help + Select EV64360 if configuring a Marvell EV64360BP Evaluation + platform. endchoice config PQ2ADS @@ -722,7 +703,7 @@ config PQ2ADS config TQM8xxL bool - depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L || SM850) + depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L) default y config EMBEDDEDBOOT @@ -796,15 +777,15 @@ config PPC_OF config PPC_GEN550 bool - depends on SANDPOINT || MCPN765 || SPRUCE || PPLUS || PCORE || \ - PRPMC750 || K2 || PRPMC800 || LOPEC || \ + depends on SANDPOINT || SPRUCE || PPLUS || \ + PRPMC750 || PRPMC800 || LOPEC || \ (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \ 83xx default y config FORCE bool - depends on 6xx && (PCORE || POWERPMC250) + depends on 6xx && POWERPMC250 default y config GT64260 @@ -814,7 +795,7 @@ config GT64260 config MV64360 # Really MV64360 & MV64460 bool - depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU + depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360 default y config MV64X60 @@ -867,7 +848,7 @@ config EPIC_SERIAL_MODE config MPC10X_BRIDGE bool - depends on PCORE || POWERPMC250 || LOPEC || SANDPOINT + depends on POWERPMC250 || LOPEC || SANDPOINT default y config MPC10X_OPENPIC @@ -886,10 +867,6 @@ config SANDPOINT_ENABLE_UART1 If this option is enabled then the MPC824x processor will run in DUART mode instead of UART mode. -config CPC710_DATA_GATHERING - bool "Enable CPC710 data gathering" - depends on K2 - config HARRIER_STORE_GATHERING bool "Enable Harrier store gathering" depends on HARRIER @@ -1194,6 +1171,11 @@ config PCI_DOMAINS bool default PCI +config MPC83xx_PCI2 + bool " Supprt for 2nd PCI host controller" + depends on PCI && MPC834x + default y if MPC834x_SYS + config PCI_QSPAN bool "QSpan PCI" depends on !4xx && !CPM2 && 8xx diff --git a/arch/ppc/Kconfig.debug b/arch/ppc/Kconfig.debug index e16c7710d4be..61653cb60c4e 100644 --- a/arch/ppc/Kconfig.debug +++ b/arch/ppc/Kconfig.debug @@ -62,7 +62,8 @@ config BOOTX_TEXT config SERIAL_TEXT_DEBUG bool "Support for early boot texts over serial port" - depends on 4xx || GT64260 || LOPEC || PPLUS || PRPMC800 || PPC_GEN550 || PPC_MPC52xx + depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \ + PPC_GEN550 || PPC_MPC52xx config PPC_OCP bool diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile index f9b0d778dd82..16e2675f3270 100644 --- a/arch/ppc/Makefile +++ b/arch/ppc/Makefile @@ -21,11 +21,14 @@ CC := $(CC) -m32 endif LDFLAGS_vmlinux := -Ttext $(KERNELLOAD) -Bstatic -CPPFLAGS += -Iarch/$(ARCH) +# The -Iarch/$(ARCH)/include is temporary while we are merging +CPPFLAGS += -Iarch/$(ARCH) -Iarch/$(ARCH)/include AFLAGS += -Iarch/$(ARCH) CFLAGS += -Iarch/$(ARCH) -msoft-float -pipe \ -ffixed-r2 -mmultiple CPP = $(CC) -E $(CFLAGS) +# Temporary hack until we have migrated to asm-powerpc +LINUXINCLUDE += -Iarch/$(ARCH)/include CHECKFLAGS += -D__powerpc__ @@ -101,14 +104,16 @@ endef archclean: $(Q)$(MAKE) $(clean)=arch/ppc/boot + # Temporary hack until we have migrated to asm-powerpc + $(Q)rm -rf arch/$(ARCH)/include -prepare: include/asm-$(ARCH)/offsets.h checkbin +archprepare: checkbin -arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \ - include/config/MARKER - -include/asm-$(ARCH)/offsets.h: arch/$(ARCH)/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) +# Temporary hack until we have migrated to asm-powerpc +include/asm: arch/$(ARCH)/include/asm +arch/$(ARCH)/include/asm: + $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi + $(Q)ln -fsn $(srctree)/include/asm-powerpc arch/$(ARCH)/include/asm # Use the file '.tmp_gas_check' for binutils tests, as gas won't output # to stdout and these checks are run even on install targets. @@ -134,7 +139,5 @@ checkbin: false ; \ fi -CLEAN_FILES += include/asm-$(ARCH)/offsets.h \ - arch/$(ARCH)/kernel/asm-offsets.s \ - $(TOUT) +CLEAN_FILES += $(TOUT) diff --git a/arch/ppc/boot/common/ns16550.c b/arch/ppc/boot/common/ns16550.c index 9017c547a6f6..26818bbb6cff 100644 --- a/arch/ppc/boot/common/ns16550.c +++ b/arch/ppc/boot/common/ns16550.c @@ -23,7 +23,7 @@ static int shift; unsigned long serial_init(int chan, void *ignored) { - unsigned long com_port; + unsigned long com_port, base_baud; unsigned char lcr, dlm; /* We need to find out which type io we're expecting. If it's @@ -43,6 +43,8 @@ unsigned long serial_init(int chan, void *ignored) /* How far apart the registers are. */ shift = rs_table[chan].iomem_reg_shift; + /* Base baud.. */ + base_baud = rs_table[chan].baud_base; /* save the LCR */ lcr = inb(com_port + (UART_LCR << shift)); @@ -62,9 +64,9 @@ unsigned long serial_init(int chan, void *ignored) else { /* Input clock. */ outb(com_port + (UART_DLL << shift), - (BASE_BAUD / SERIAL_BAUD) & 0xFF); + (base_baud / SERIAL_BAUD) & 0xFF); outb(com_port + (UART_DLM << shift), - (BASE_BAUD / SERIAL_BAUD) >> 8); + (base_baud / SERIAL_BAUD) >> 8); /* 8 data, 1 stop, no parity */ outb(com_port + (UART_LCR << shift), 0x03); /* RTS/DTR */ diff --git a/arch/ppc/boot/common/util.S b/arch/ppc/boot/common/util.S index 47e641455bc5..c96c9f80521e 100644 --- a/arch/ppc/boot/common/util.S +++ b/arch/ppc/boot/common/util.S @@ -252,7 +252,7 @@ _GLOBAL(flush_instruction_cache) 1: dcbf r0,r3 # Flush the data cache icbi r0,r3 # Invalidate the instruction cache addi r3,r3,0x10 # Increment by one cache line - cmplwi cr0,r3,r4 # Are we at the end yet? + cmplw cr0,r3,r4 # Are we at the end yet? blt 1b # No, keep flushing and invalidating #else /* Enable, invalidate and then disable the L1 icache/dcache. */ diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index d4dc4fa79647..b7bd8f61a4ad 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -96,10 +96,6 @@ zimageinitrd-$(CONFIG_OCOTEA) := zImage.initrd-TREE zimageinitrd-$(CONFIG_GEMINI) := zImage.initrd-STRIPELF end-$(CONFIG_GEMINI) := gemini - extra.o-$(CONFIG_K2) := prepmap.o - end-$(CONFIG_K2) := k2 - cacheflag-$(CONFIG_K2) := -include $(clear_L2_L3) - extra.o-$(CONFIG_KATANA) := misc-katana.o end-$(CONFIG_KATANA) := katana cacheflag-$(CONFIG_KATANA) := -include $(clear_L2_L3) @@ -108,12 +104,15 @@ zimageinitrd-$(CONFIG_GEMINI) := zImage.initrd-STRIPELF end-$(CONFIG_RADSTONE_PPC7D) := radstone_ppc7d cacheflag-$(CONFIG_RADSTONE_PPC7D) := -include $(clear_L2_L3) + extra.o-$(CONFIG_EV64360) := misc-ev64360.o + end-$(CONFIG_EV64360) := ev64360 + cacheflag-$(CONFIG_EV64360) := -include $(clear_L2_L3) + # kconfig 'feature', only one of these will ever be 'y' at a time. # The rest will be unset. -motorola := $(CONFIG_MCPN765)$(CONFIG_MVME5100)$(CONFIG_PRPMC750) \ +motorola := $(CONFIG_MVME5100)$(CONFIG_PRPMC750) \ $(CONFIG_PRPMC800)$(CONFIG_LOPEC)$(CONFIG_PPLUS) motorola := $(strip $(motorola)) -pcore := $(CONFIG_PCORE)$(CONFIG_POWERPMC250) zimage-$(motorola) := zImage-PPLUS zimageinitrd-$(motorola) := zImage.initrd-PPLUS @@ -123,12 +122,6 @@ zimageinitrd-$(motorola) := zImage.initrd-PPLUS extra.o-$(CONFIG_PPLUS) := prepmap.o extra.o-$(CONFIG_LOPEC) := mpc10x_memory.o - zimage-$(pcore) := zImage-STRIPELF -zimageinitrd-$(pcore) := zImage.initrd-STRIPELF - extra.o-$(pcore) := chrpmap.o - end-$(pcore) := pcore - cacheflag-$(pcore) := -include $(clear_L2_L3) - # Really only valid if CONFIG_6xx=y zimage-$(CONFIG_PPC_PREP) := zImage-PPLUS zimageinitrd-$(CONFIG_PPC_PREP) := zImage.initrd-PPLUS @@ -158,8 +151,6 @@ zimageinitrd-$(CONFIG_LITE5200) := zImage.initrd-STRIPELF # This is a treeboot that needs init functions until the # boot rom is sorted out (i.e. this is short lived) -extra-aflags-$(CONFIG_REDWOOD_4) := -Wa,-m405 -extra.o-$(CONFIG_REDWOOD_4) := rw4/rw4_init.o rw4/rw4_init_brd.o EXTRA_AFLAGS := $(extra-aflags-y) # head.o needs to get the cacheflags defined. AFLAGS_head.o += $(cacheflag-y) diff --git a/arch/ppc/boot/simple/embed_config.c b/arch/ppc/boot/simple/embed_config.c index c342b47e763e..491a691d10cc 100644 --- a/arch/ppc/boot/simple/embed_config.c +++ b/arch/ppc/boot/simple/embed_config.c @@ -784,28 +784,12 @@ embed_config(bd_t ** bdp) #ifdef CONFIG_IBM_OPENBIOS /* This could possibly work for all treeboot roms. */ -#if defined(CONFIG_ASH) || defined(CONFIG_BEECH) || defined(CONFIG_BUBINGA) +#if defined(CONFIG_BUBINGA) #define BOARD_INFO_VECTOR 0xFFF80B50 /* openbios 1.19 moved this vector down - armin */ #else #define BOARD_INFO_VECTOR 0xFFFE0B50 #endif -#ifdef CONFIG_BEECH -static void -get_board_info(bd_t **bdp) -{ - typedef void (*PFV)(bd_t *bd); - ((PFV)(*(unsigned long *)BOARD_INFO_VECTOR))(*bdp); - return; -} - -void -embed_config(bd_t **bdp) -{ - *bdp = &bdinfo; - get_board_info(bdp); -} -#else /* !CONFIG_BEECH */ void embed_config(bd_t **bdp) { @@ -860,7 +844,6 @@ embed_config(bd_t **bdp) #endif timebase_period_ns = 1000000000 / bd->bi_tbfreq; } -#endif /* CONFIG_BEECH */ #endif /* CONFIG_IBM_OPENBIOS */ #ifdef CONFIG_EP405 @@ -943,39 +926,3 @@ embed_config(bd_t **bdp) #endif } #endif - -#ifdef CONFIG_RAINIER -/* Rainier uses vxworks bootrom */ -void -embed_config(bd_t **bdp) -{ - u_char *cp; - int i; - bd_t *bd; - - bd = &bdinfo; - *bdp = bd; - - for(i=0;i<8192;i+=32) { - __asm__("dccci 0,%0" :: "r" (i)); - } - __asm__("iccci 0,0"); - __asm__("sync;isync"); - - /* init ram for parity */ - memset(0, 0,0x400000); /* Lo memory */ - - - bd->bi_memsize = (32 * 1024 * 1024) ; - bd->bi_intfreq = 133000000; //the internal clock is 133 MHz - bd->bi_busfreq = 100000000; - bd->bi_pci_busfreq= 33000000; - - cp = (u_char *)def_enet_addr; - for (i=0; i<6; i++) { - bd->bi_enetaddr[i] = *cp++; - } - -} -#endif - diff --git a/arch/ppc/boot/simple/head.S b/arch/ppc/boot/simple/head.S index 524053202bb4..5e4adc298bf9 100644 --- a/arch/ppc/boot/simple/head.S +++ b/arch/ppc/boot/simple/head.S @@ -120,15 +120,6 @@ haveOF: mtspr SPRN_DER,r4 #endif -#ifdef CONFIG_REDWOOD_4 - /* All of this Redwood 4 stuff will soon disappear when the - * boot rom is straightened out. - */ - mr r29, r3 /* Easier than changing the other code */ - bl HdwInit - mr r3, r29 -#endif - #if defined(CONFIG_MBX) || defined(CONFIG_RPX8260) || defined(CONFIG_PPC_PREP) mr r4,r29 /* put the board info pointer where the relocate * routine will find it diff --git a/arch/ppc/boot/simple/misc-cpci690.c b/arch/ppc/boot/simple/misc-cpci690.c index ef08e86c9b25..26860300fa09 100644 --- a/arch/ppc/boot/simple/misc-cpci690.c +++ b/arch/ppc/boot/simple/misc-cpci690.c @@ -12,16 +12,56 @@ */ #include <linux/types.h> +#include <asm/io.h> #include <platforms/cpci690.h> +#define KB (1024UL) +#define MB (1024UL*KB) +#define GB (1024UL*MB) + extern u32 mv64x60_console_baud; extern u32 mv64x60_mpsc_clk_src; extern u32 mv64x60_mpsc_clk_freq; +u32 mag = 0xffff; + +unsigned long +get_mem_size(void) +{ + u32 size; + + switch (in_8(((void __iomem *)CPCI690_BR_BASE + CPCI690_BR_MEM_CTLR)) + & 0x07) { + case 0x01: + size = 256*MB; + break; + case 0x02: + size = 512*MB; + break; + case 0x03: + size = 768*MB; + break; + case 0x04: + size = 1*GB; + break; + case 0x05: + size = 1*GB + 512*MB; + break; + case 0x06: + size = 2*GB; + break; + default: + size = 0; + } + + return size; +} + void mv64x60_board_init(void __iomem *old_base, void __iomem *new_base) { mv64x60_console_baud = CPCI690_MPSC_BAUD; mv64x60_mpsc_clk_src = CPCI690_MPSC_CLK_SRC; - mv64x60_mpsc_clk_freq = CPCI690_BUS_FREQ; + mv64x60_mpsc_clk_freq = + (get_mem_size() >= (1*GB)) ? 100000000 : 133333333; } diff --git a/arch/ppc/boot/simple/misc-ev64360.c b/arch/ppc/boot/simple/misc-ev64360.c new file mode 100644 index 000000000000..cd1ccf2a1582 --- /dev/null +++ b/arch/ppc/boot/simple/misc-ev64360.c @@ -0,0 +1,44 @@ +/* + * arch/ppc/boot/simple/misc-ev64360.c + * Copyright (C) 2005 Lee Nicks <allinux@gmail.com> + * + * Based on arch/ppc/boot/simple/misc-katana.c from: + * Mark A. Greer <source@mvista.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <asm/io.h> +#include <asm/mv64x60_defs.h> +#include <platforms/ev64360.h> + +extern u32 mv64x60_console_baud; +extern u32 mv64x60_mpsc_clk_src; +extern u32 mv64x60_mpsc_clk_freq; + +/* Not in the kernel so won't include kernel.h to get its 'min' definition */ +#ifndef min +#define min(a,b) (((a) < (b)) ? (a) : (b)) +#endif + +void +mv64x60_board_init(void __iomem *old_base, void __iomem *new_base) +{ + mv64x60_console_baud = EV64360_DEFAULT_BAUD; + mv64x60_mpsc_clk_src = EV64360_MPSC_CLK_SRC; + mv64x60_mpsc_clk_freq = EV64360_MPSC_CLK_FREQ; +} diff --git a/arch/ppc/boot/simple/misc-katana.c b/arch/ppc/boot/simple/misc-katana.c index b6e1bb833157..ec94a11bacac 100644 --- a/arch/ppc/boot/simple/misc-katana.c +++ b/arch/ppc/boot/simple/misc-katana.c @@ -26,6 +26,8 @@ extern u32 mv64x60_mpsc_clk_freq; #define min(a,b) (((a) < (b)) ? (a) : (b)) #endif +unsigned long mv64360_get_mem_size(void); + void mv64x60_board_init(void __iomem *old_base, void __iomem *new_base) { @@ -35,3 +37,9 @@ mv64x60_board_init(void __iomem *old_base, void __iomem *new_base) min(katana_bus_freq((void __iomem *)KATANA_CPLD_BASE), MV64x60_TCLK_FREQ_MAX); } + +unsigned long +get_mem_size(void) +{ + return mv64360_get_mem_size(); +} diff --git a/arch/ppc/boot/simple/misc-mv64x60.c b/arch/ppc/boot/simple/misc-mv64x60.c index 7e88fc6d207d..258d4599fadc 100644 --- a/arch/ppc/boot/simple/misc-mv64x60.c +++ b/arch/ppc/boot/simple/misc-mv64x60.c @@ -19,6 +19,33 @@ extern struct bi_record *decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum); + +u32 size_reg[MV64x60_CPU2MEM_WINDOWS] = { + MV64x60_CPU2MEM_0_SIZE, MV64x60_CPU2MEM_1_SIZE, + MV64x60_CPU2MEM_2_SIZE, MV64x60_CPU2MEM_3_SIZE +}; + +/* Read mem ctlr to get the amount of mem in system */ +unsigned long +mv64360_get_mem_size(void) +{ + u32 enables, i, v; + u32 mem = 0; + + enables = in_le32((void __iomem *)CONFIG_MV64X60_NEW_BASE + + MV64360_CPU_BAR_ENABLE) & 0xf; + + for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) + if (!(enables & (1<<i))) { + v = in_le32((void __iomem *)CONFIG_MV64X60_NEW_BASE + + size_reg[i]) & 0xffff; + v = (v + 1) << 16; + mem += v; + } + + return mem; +} + void mv64x60_move_base(void __iomem *old_base, void __iomem *new_base) { diff --git a/arch/ppc/boot/simple/mv64x60_tty.c b/arch/ppc/boot/simple/mv64x60_tty.c index 5b45eb46b669..b9c24d4c738b 100644 --- a/arch/ppc/boot/simple/mv64x60_tty.c +++ b/arch/ppc/boot/simple/mv64x60_tty.c @@ -22,9 +22,16 @@ #include <asm/mv64x60_defs.h> #include <mpsc_defs.h> +#ifdef CONFIG_EV64360 +#include <platforms/ev64360.h> +u32 mv64x60_console_baud = EV64360_DEFAULT_BAUD; +u32 mv64x60_mpsc_clk_src = EV64360_MPSC_CLK_SRC; /* TCLK */ +u32 mv64x60_mpsc_clk_freq = EV64360_MPSC_CLK_FREQ; +#else u32 mv64x60_console_baud = 9600; u32 mv64x60_mpsc_clk_src = 8; /* TCLK */ u32 mv64x60_mpsc_clk_freq = 100000000; +#endif extern void udelay(long); static void stop_dma(int chan); diff --git a/arch/ppc/boot/utils/addRamDisk.c b/arch/ppc/boot/utils/addRamDisk.c deleted file mode 100644 index 93400dfcce7f..000000000000 --- a/arch/ppc/boot/utils/addRamDisk.c +++ /dev/null @@ -1,203 +0,0 @@ -#include <stdio.h> -#include <stdlib.h> -#include <netinet/in.h> -#include <unistd.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <string.h> - -#define ElfHeaderSize (64 * 1024) -#define ElfPages (ElfHeaderSize / 4096) -#define KERNELBASE (0xc0000000) - -void get4k(FILE *file, char *buf ) -{ - unsigned j; - unsigned num = fread(buf, 1, 4096, file); - for ( j=num; j<4096; ++j ) - buf[j] = 0; -} - -void put4k(FILE *file, char *buf ) -{ - fwrite(buf, 1, 4096, file); -} - -void death(const char *msg, FILE *fdesc, const char *fname) -{ - printf(msg); - fclose(fdesc); - unlink(fname); - exit(1); -} - -int main(int argc, char **argv) -{ - char inbuf[4096]; - FILE *ramDisk = NULL; - FILE *inputVmlinux = NULL; - FILE *outputVmlinux = NULL; - unsigned i = 0; - u_int32_t ramFileLen = 0; - u_int32_t ramLen = 0; - u_int32_t roundR = 0; - u_int32_t kernelLen = 0; - u_int32_t actualKernelLen = 0; - u_int32_t round = 0; - u_int32_t roundedKernelLen = 0; - u_int32_t ramStartOffs = 0; - u_int32_t ramPages = 0; - u_int32_t roundedKernelPages = 0; - u_int32_t hvReleaseData = 0; - u_int32_t eyeCatcher = 0xc8a5d9c4; - u_int32_t naca = 0; - u_int32_t xRamDisk = 0; - u_int32_t xRamDiskSize = 0; - if ( argc < 2 ) { - printf("Name of RAM disk file missing.\n"); - exit(1); - } - - if ( argc < 3 ) { - printf("Name of vmlinux file missing.\n"); - exit(1); - } - - if ( argc < 4 ) { - printf("Name of vmlinux output file missing.\n"); - exit(1); - } - - ramDisk = fopen(argv[1], "r"); - if ( ! ramDisk ) { - printf("RAM disk file \"%s\" failed to open.\n", argv[1]); - exit(1); - } - inputVmlinux = fopen(argv[2], "r"); - if ( ! inputVmlinux ) { - printf("vmlinux file \"%s\" failed to open.\n", argv[2]); - exit(1); - } - outputVmlinux = fopen(argv[3], "w+"); - if ( ! outputVmlinux ) { - printf("output vmlinux file \"%s\" failed to open.\n", argv[3]); - exit(1); - } - fseek(ramDisk, 0, SEEK_END); - ramFileLen = ftell(ramDisk); - fseek(ramDisk, 0, SEEK_SET); - printf("%s file size = %d\n", argv[1], ramFileLen); - - ramLen = ramFileLen; - - roundR = 4096 - (ramLen % 4096); - if ( roundR ) { - printf("Rounding RAM disk file up to a multiple of 4096, adding %d\n", roundR); - ramLen += roundR; - } - - printf("Rounded RAM disk size is %d\n", ramLen); - fseek(inputVmlinux, 0, SEEK_END); - kernelLen = ftell(inputVmlinux); - fseek(inputVmlinux, 0, SEEK_SET); - printf("kernel file size = %d\n", kernelLen); - if ( kernelLen == 0 ) { - printf("You must have a linux kernel specified as argv[2]\n"); - exit(1); - } - - actualKernelLen = kernelLen - ElfHeaderSize; - - printf("actual kernel length (minus ELF header) = %d\n", actualKernelLen); - - round = actualKernelLen % 4096; - roundedKernelLen = actualKernelLen; - if ( round ) - roundedKernelLen += (4096 - round); - - printf("actual kernel length rounded up to a 4k multiple = %d\n", roundedKernelLen); - - ramStartOffs = roundedKernelLen; - ramPages = ramLen / 4096; - - printf("RAM disk pages to copy = %d\n", ramPages); - - // Copy 64K ELF header - for (i=0; i<(ElfPages); ++i) { - get4k( inputVmlinux, inbuf ); - put4k( outputVmlinux, inbuf ); - } - - roundedKernelPages = roundedKernelLen / 4096; - - fseek(inputVmlinux, ElfHeaderSize, SEEK_SET); - - for ( i=0; i<roundedKernelPages; ++i ) { - get4k( inputVmlinux, inbuf ); - put4k( outputVmlinux, inbuf ); - } - - for ( i=0; i<ramPages; ++i ) { - get4k( ramDisk, inbuf ); - put4k( outputVmlinux, inbuf ); - } - - /* Close the input files */ - fclose(ramDisk); - fclose(inputVmlinux); - /* And flush the written output file */ - fflush(outputVmlinux); - - /* fseek to the hvReleaseData pointer */ - fseek(outputVmlinux, ElfHeaderSize + 0x24, SEEK_SET); - if (fread(&hvReleaseData, 4, 1, outputVmlinux) != 1) { - death("Could not read hvReleaseData pointer\n", outputVmlinux, argv[3]); - } - hvReleaseData = ntohl(hvReleaseData); /* Convert to native int */ - printf("hvReleaseData is at %08x\n", hvReleaseData); - - /* fseek to the hvReleaseData */ - fseek(outputVmlinux, ElfHeaderSize + hvReleaseData, SEEK_SET); - if (fread(inbuf, 0x40, 1, outputVmlinux) != 1) { - death("Could not read hvReleaseData\n", outputVmlinux, argv[3]); - } - /* Check hvReleaseData sanity */ - if (memcmp(inbuf, &eyeCatcher, 4) != 0) { - death("hvReleaseData is invalid\n", outputVmlinux, argv[3]); - } - /* Get the naca pointer */ - naca = ntohl(*((u_int32_t *) &inbuf[0x0c])) - KERNELBASE; - printf("naca is at %08x\n", naca); - - /* fseek to the naca */ - fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET); - if (fread(inbuf, 0x18, 1, outputVmlinux) != 1) { - death("Could not read naca\n", outputVmlinux, argv[3]); - } - xRamDisk = ntohl(*((u_int32_t *) &inbuf[0x0c])); - xRamDiskSize = ntohl(*((u_int32_t *) &inbuf[0x14])); - /* Make sure a RAM disk isn't already present */ - if ((xRamDisk != 0) || (xRamDiskSize != 0)) { - death("RAM disk is already attached to this kernel\n", outputVmlinux, argv[3]); - } - /* Fill in the values */ - *((u_int32_t *) &inbuf[0x0c]) = htonl(ramStartOffs); - *((u_int32_t *) &inbuf[0x14]) = htonl(ramPages); - - /* Write out the new naca */ - fflush(outputVmlinux); - fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET); - if (fwrite(inbuf, 0x18, 1, outputVmlinux) != 1) { - death("Could not write naca\n", outputVmlinux, argv[3]); - } - printf("RAM Disk of 0x%x pages size is attached to the kernel at offset 0x%08x\n", - ramPages, ramStartOffs); - - /* Done */ - fclose(outputVmlinux); - /* Set permission to executable */ - chmod(argv[3], S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH); - - return 0; -} - diff --git a/arch/ppc/configs/SM850_defconfig b/arch/ppc/configs/SM850_defconfig deleted file mode 100644 index 021884b43029..000000000000 --- a/arch/ppc/configs/SM850_defconfig +++ /dev/null @@ -1,522 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Platform support -# -CONFIG_PPC=y -CONFIG_PPC32=y -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_POWER3 is not set -CONFIG_8xx=y - -# -# IBM 4xx options -# -CONFIG_EMBEDDEDBOOT=y -CONFIG_SERIAL_CONSOLE=y -CONFIG_NOT_COHERENT_CACHE=y -# CONFIG_RPXLITE is not set -# CONFIG_RPXCLASSIC is not set -# CONFIG_BSEIP is not set -# CONFIG_FADS is not set -# CONFIG_TQM823L is not set -# CONFIG_TQM850L is not set -# CONFIG_TQM855L is not set -# CONFIG_TQM860L is not set -# CONFIG_FPS850L is not set -# CONFIG_SPD823TS is not set -# CONFIG_IVMS8 is not set -# CONFIG_IVML24 is not set -CONFIG_SM850=y -# CONFIG_HERMES_PRO is not set -# CONFIG_IP860 is not set -# CONFIG_LWMON is not set -# CONFIG_PCU_E is not set -# CONFIG_CCM is not set -# CONFIG_LANTEC is not set -# CONFIG_MBX is not set -# CONFIG_WINCEPT is not set -CONFIG_TQM8xxL=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -CONFIG_MATH_EMULATION=y -# CONFIG_CPU_FREQ is not set - -# -# General setup -# -# CONFIG_HIGHMEM is not set -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_QSPAN is not set -CONFIG_KCORE_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_KERNEL_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_HOTPLUG is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttyCPM1" - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# ATA/IDE/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI support -# -# CONFIG_SCSI is not set - -# -# Fusion MPT device support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_OAKNET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices (depends on LLC=y) -# -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN_BOOL is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Userland interfaces -# - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set - -# -# Input Device Drivers -# - -# -# Macintosh device drivers -# - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -CONFIG_SERIAL_CPM_SMC2=y -CONFIG_SERIAL_CPM_ALT_SMC2=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# I2C Hardware Sensors Mainboard support -# - -# -# I2C Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_DEVFS_FS is not set -CONFIG_DEVPTS_FS=y -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_NEC98_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# MPC8xx CPM Options -# -CONFIG_SCC_ENET=y -# CONFIG_SCC1_ENET is not set -# CONFIG_SCC2_ENET is not set -CONFIG_SCC3_ENET=y -# CONFIG_FEC_ENET is not set -CONFIG_ENET_BIG_BUFFERS=y - -# -# Generic MPC8xx Options -# -CONFIG_8xx_COPYBACK=y -CONFIG_8xx_CPU6=y -# CONFIG_UCODE_PATCH is not set - -# -# USB support -# -# CONFIG_USB_GADGET is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set - -# -# Library routines -# -# CONFIG_CRC32 is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_KALLSYMS is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/configs/SPD823TS_defconfig b/arch/ppc/configs/SPD823TS_defconfig deleted file mode 100644 index ba60fea2b834..000000000000 --- a/arch/ppc/configs/SPD823TS_defconfig +++ /dev/null @@ -1,520 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Platform support -# -CONFIG_PPC=y -CONFIG_PPC32=y -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_POWER3 is not set -CONFIG_8xx=y - -# -# IBM 4xx options -# -CONFIG_EMBEDDEDBOOT=y -CONFIG_SERIAL_CONSOLE=y -CONFIG_NOT_COHERENT_CACHE=y -# CONFIG_RPXLITE is not set -# CONFIG_RPXCLASSIC is not set -# CONFIG_BSEIP is not set -# CONFIG_FADS is not set -# CONFIG_TQM823L is not set -# CONFIG_TQM850L is not set -# CONFIG_TQM855L is not set -# CONFIG_TQM860L is not set -# CONFIG_FPS850L is not set -CONFIG_SPD823TS=y -# CONFIG_IVMS8 is not set -# CONFIG_IVML24 is not set -# CONFIG_SM850 is not set -# CONFIG_HERMES_PRO is not set -# CONFIG_IP860 is not set -# CONFIG_LWMON is not set -# CONFIG_PCU_E is not set -# CONFIG_CCM is not set -# CONFIG_LANTEC is not set -# CONFIG_MBX is not set -# CONFIG_WINCEPT is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -CONFIG_MATH_EMULATION=y -# CONFIG_CPU_FREQ is not set - -# -# General setup -# -# CONFIG_HIGHMEM is not set -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_QSPAN is not set -CONFIG_KCORE_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_KERNEL_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_HOTPLUG is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set -# CONFIG_CMDLINE_BOOL is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# ATA/IDE/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI support -# -# CONFIG_SCSI is not set - -# -# Fusion MPT device support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_OAKNET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices (depends on LLC=y) -# -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN_BOOL is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Userland interfaces -# - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set - -# -# Input Device Drivers -# - -# -# Macintosh device drivers -# - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -# CONFIG_SERIAL_CPM_SMC2 is not set -CONFIG_SERIAL_CPM_ALT_SMC2=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# I2C Hardware Sensors Mainboard support -# - -# -# I2C Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_DEVFS_FS is not set -CONFIG_DEVPTS_FS=y -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_NEC98_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# MPC8xx CPM Options -# -CONFIG_SCC_ENET=y -# CONFIG_SCC1_ENET is not set -CONFIG_SCC2_ENET=y -# CONFIG_SCC3_ENET is not set -# CONFIG_FEC_ENET is not set -CONFIG_ENET_BIG_BUFFERS=y - -# -# Generic MPC8xx Options -# -CONFIG_8xx_COPYBACK=y -# CONFIG_8xx_CPU6 is not set -# CONFIG_UCODE_PATCH is not set - -# -# USB support -# -# CONFIG_USB_GADGET is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set - -# -# Library routines -# -# CONFIG_CRC32 is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_KALLSYMS is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/configs/adir_defconfig b/arch/ppc/configs/adir_defconfig deleted file mode 100644 index f20e6533dc79..000000000000 --- a/arch/ppc/configs/adir_defconfig +++ /dev/null @@ -1,805 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_EMBEDDED is not set -CONFIG_FUTEX=y -CONFIG_EPOLL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Platform support -# -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_POWER3 is not set -# CONFIG_8xx is not set - -# -# IBM 4xx options -# -# CONFIG_8260 is not set -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PPC_STD_MMU=y -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_APUS is not set -# CONFIG_WILLOW_2 is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set -# CONFIG_SPRUCE is not set -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -CONFIG_ADIR=y -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_ALTIVEC is not set -# CONFIG_TAU is not set -# CONFIG_CPU_FREQ is not set - -# -# General setup -# -# CONFIG_HIGHMEM is not set -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_KCORE_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_KERNEL_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_NAMES is not set -# CONFIG_HOTPLUG is not set - -# -# Parallel port support -# -CONFIG_PARPORT=y -CONFIG_PARPORT_PC=y -CONFIG_PARPORT_PC_CML1=y -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_OTHER is not set -CONFIG_PARPORT_1284=y -# CONFIG_PPC601_SYNC_FIX is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="ip=on" - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -CONFIG_BLK_DEV_FD=y -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# ATA/IDE/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI support -# -CONFIG_SCSI=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_REPORT_LUNS is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_AM53C974 is not set -# CONFIG_SCSI_MEGARAID is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -# CONFIG_SCSI_NCR53C7xx is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -CONFIG_SCSI_NCR53C8XX=y -CONFIG_SCSI_SYM53C8XX=y -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -# CONFIG_SCSI_PCI2000 is not set -# CONFIG_SCSI_PCI2220I is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -# CONFIG_IP_NF_MANGLE is not set -# CONFIG_IP_NF_TARGET_LOG is not set -# CONFIG_IP_NF_TARGET_ULOG is not set -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -# CONFIG_IP_NF_COMPAT_IPFWADM is not set -# CONFIG_IPV6 is not set -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_OAKNET is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_EEPRO100_PIO is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices (depends on LLC=y) -# -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN_BOOL is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Userland interfaces -# - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set - -# -# Input Device Drivers -# - -# -# Macintosh device drivers -# - -# -# Character devices -# -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# I2C Hardware Sensors Mainboard support -# - -# -# I2C Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_DEVFS_FS is not set -CONFIG_DEVPTS_FS=y -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -CONFIG_USB_DYNAMIC_MINORS=y - -# -# USB Host Controller Drivers -# -# CONFIG_USB_EHCI_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_UHCI_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_BLUETOOTH_TTY is not set -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -CONFIG_USB_STORAGE_FREECOM=y -# CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Human Interface Devices (HID) -# -CONFIG_USB_HID=m - -# -# Input core support is needed for USB HID input layer or HIDBP support -# -CONFIG_USB_HIDDEV=y - -# -# USB HID Boot Protocol drivers -# - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network adaptors -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -# CONFIG_USB_SERIAL_GENERIC is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -CONFIG_USB_SERIAL_VISOR=m -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_PL2303 is not set -# CONFIG_USB_SERIAL_SAFE is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OMNINET is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_TIGL is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_GADGET is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set - -# -# Library routines -# -# CONFIG_CRC32 is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_KALLSYMS is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/configs/ash_defconfig b/arch/ppc/configs/ash_defconfig deleted file mode 100644 index c4a73cc16cf6..000000000000 --- a/arch/ppc/configs/ash_defconfig +++ /dev/null @@ -1,666 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_STANDALONE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_HOTPLUG is not set -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor -# -# CONFIG_6xx is not set -CONFIG_40x=y -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_CPU_FREQ is not set -CONFIG_4xx=y - -# -# IBM 4xx options -# -CONFIG_ASH=y -# CONFIG_CPCI405 is not set -# CONFIG_EP405 is not set -# CONFIG_EVB405EP is not set -# CONFIG_OAK is not set -# CONFIG_REDWOOD_5 is not set -# CONFIG_REDWOOD_6 is not set -# CONFIG_SYCAMORE is not set -# CONFIG_WALNUT is not set -CONFIG_NP405H=y -CONFIG_IBM405_ERR77=y -CONFIG_IBM405_ERR51=y -CONFIG_IBM_OCP=y -CONFIG_PPC_OCP=y -CONFIG_IBM_OPENBIOS=y -# CONFIG_PM is not set -CONFIG_UART0_TTYS0=y -# CONFIG_UART0_TTYS1 is not set -CONFIG_NOT_COHERENT_CACHE=y - -# -# Platform options -# -# CONFIG_PC_KEYBOARD is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_KERNEL_ELF=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="ip=on" - -# -# Bus options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_NAMES is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_CARMEL is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -CONFIG_IBM_EMAC=y -# CONFIG_IBM_EMAC_ERRMSG is not set -CONFIG_IBM_EMAC_RXB=64 -CONFIG_IBM_EMAC_TXB=8 -CONFIG_IBM_EMAC_FGAP=8 -CONFIG_IBM_EMAC_SKBRES=0 -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_IBM_IIC is not set -# CONFIG_I2C_ISA is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_NEC98_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# IBM 40x options -# - -# -# Library routines -# -CONFIG_CRC32=y - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set -CONFIG_OCP=y - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/configs/beech_defconfig b/arch/ppc/configs/beech_defconfig deleted file mode 100644 index 0bd671bdceb4..000000000000 --- a/arch/ppc/configs/beech_defconfig +++ /dev/null @@ -1,615 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -# CONFIG_STANDALONE is not set -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_KMOD=y - -# -# Processor -# -# CONFIG_6xx is not set -CONFIG_40x=y -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_CPU_FREQ is not set -CONFIG_4xx=y - -# -# IBM 4xx options -# -# CONFIG_ASH is not set -CONFIG_BEECH=y -# CONFIG_CEDAR is not set -# CONFIG_CPCI405 is not set -# CONFIG_EP405 is not set -# CONFIG_OAK is not set -# CONFIG_REDWOOD_4 is not set -# CONFIG_REDWOOD_5 is not set -# CONFIG_REDWOOD_6 is not set -# CONFIG_SYCAMORE is not set -# CONFIG_TIVO is not set -# CONFIG_WALNUT is not set -CONFIG_IBM405_ERR77=y -CONFIG_IBM405_ERR51=y -CONFIG_IBM_OCP=y -CONFIG_IBM_OPENBIOS=y -CONFIG_405_DMA=y -# CONFIG_PM is not set -CONFIG_UART0_TTYS0=y -# CONFIG_UART0_TTYS1 is not set -CONFIG_NOT_COHERENT_CACHE=y - -# -# Platform options -# -# CONFIG_PC_KEYBOARD is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_KERNEL_ELF=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set - -# -# Bus options -# -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_HOTPLUG is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Generic Driver Options -# - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_BEECH=y - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Fusion MPT device support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_OAKNET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices -# -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN_BOOL is not set - -# -# Graphics support -# -CONFIG_FB=y -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_S3TRIO is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Logo configuration -# -# CONFIG_LOGO is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Macintosh device drivers -# - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -CONFIG_I2C_IBM_IIC=y - -# -# I2C Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -CONFIG_DEVPTS_FS=y -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Sound -# -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -# CONFIG_SND is not set - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set - -# -# IBM 40x options -# - -# -# USB support -# -# CONFIG_USB_GADGET is not set - -# -# Library routines -# -# CONFIG_CRC32 is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set -CONFIG_OCP=y - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/configs/cedar_defconfig b/arch/ppc/configs/cedar_defconfig deleted file mode 100644 index 5de8288a0673..000000000000 --- a/arch/ppc/configs/cedar_defconfig +++ /dev/null @@ -1,534 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Platform support -# -CONFIG_PPC=y -CONFIG_PPC32=y -# CONFIG_6xx is not set -CONFIG_40x=y -# CONFIG_POWER3 is not set -# CONFIG_8xx is not set -CONFIG_4xx=y - -# -# IBM 4xx options -# -# CONFIG_ASH is not set -# CONFIG_BEECH is not set -CONFIG_CEDAR=y -# CONFIG_CPCI405 is not set -# CONFIG_EP405 is not set -# CONFIG_OAK is not set -# CONFIG_REDWOOD_4 is not set -# CONFIG_REDWOOD_5 is not set -# CONFIG_REDWOOD_6 is not set -# CONFIG_SYCAMORE is not set -# CONFIG_TIVO is not set -# CONFIG_WALNUT is not set -CONFIG_IBM405_ERR77=y -CONFIG_IBM405_ERR51=y -CONFIG_IBM_OCP=y -CONFIG_NP405L=y -CONFIG_BIOS_FIXUP=y -CONFIG_IBM_OPENBIOS=y -# CONFIG_405_DMA is not set -# CONFIG_PM is not set -CONFIG_UART0_TTYS0=y -# CONFIG_UART0_TTYS1 is not set -CONFIG_NOT_COHERENT_CACHE=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_CPU_FREQ is not set - -# -# General setup -# -# CONFIG_HIGHMEM is not set -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PC_KEYBOARD is not set -CONFIG_KCORE_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_KERNEL_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_HOTPLUG is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set -# CONFIG_CMDLINE_BOOL is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# ATA/IDE/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI support -# -# CONFIG_SCSI is not set - -# -# Fusion MPT device support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices (depends on LLC=y) -# -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN_BOOL is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Userland interfaces -# - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set - -# -# Input Device Drivers -# - -# -# Macintosh device drivers -# - -# -# Character devices -# -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -CONFIG_I2C_IBM_OCP_ALGO=y -CONFIG_I2C_IBM_OCP_ADAP=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Hardware Sensors Mainboard support -# -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set - -# -# I2C Hardware Sensors Chip support -# -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_I2C_SENSOR is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_WDT is not set -# CONFIG_WDTPCI is not set -# CONFIG_PCWATCHDOG is not set -# CONFIG_ACQUIRE_WDT is not set -# CONFIG_ADVANTECH_WDT is not set -# CONFIG_EUROTECH_WDT is not set -# CONFIG_IB700_WDT is not set -# CONFIG_MIXCOMWD is not set -# CONFIG_SCx200_WDT is not set -# CONFIG_60XX_WDT is not set -# CONFIG_W83877F_WDT is not set -# CONFIG_MACHZ_WDT is not set -# CONFIG_SC520_WDT is not set -# CONFIG_AMD7XX_TCO is not set -# CONFIG_ALIM7101_WDT is not set -# CONFIG_SC1200_WDT is not set -# CONFIG_WAFER_WDT is not set -# CONFIG_CPU5_WDT is not set -# CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_DEVFS_FS is not set -CONFIG_DEVPTS_FS=y -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_NEC98_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# IBM 40x options -# - -# -# USB support -# -# CONFIG_USB_GADGET is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set - -# -# Library routines -# -CONFIG_CRC32=y - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set -CONFIG_OCP=y - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/configs/cpci690_defconfig b/arch/ppc/configs/cpci690_defconfig index 53948793d9af..ff3f7e02ab0f 100644 --- a/arch/ppc/configs/cpci690_defconfig +++ b/arch/ppc/configs/cpci690_defconfig @@ -1,15 +1,17 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-rc2 -# Fri Dec 3 15:56:10 2004 +# Linux kernel version: 2.6.13-mm1 +# Thu Sep 1 17:10:37 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # # Code maturity level options @@ -17,33 +19,38 @@ CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -65,38 +72,42 @@ CONFIG_6xx=y # CONFIG_POWER3 is not set # CONFIG_POWER4 is not set # CONFIG_8xx is not set +# CONFIG_E200 is not set # CONFIG_E500 is not set +CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y # CONFIG_TAU is not set +# CONFIG_KEXEC is not set # CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set CONFIG_PPC_STD_MMU=y # CONFIG_NOT_COHERENT_CACHE is not set # +# Performance-monitoring counters support +# +# CONFIG_PERFCTR is not set + +# # Platform options # # CONFIG_PPC_MULTIPLATFORM is not set # CONFIG_APUS is not set # CONFIG_KATANA is not set -# CONFIG_DMV182 is not set # CONFIG_WILLOW is not set CONFIG_CPCI690=y -# CONFIG_PCORE is not set # CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set -# CONFIG_DB64360 is not set # CONFIG_CHESTNUT is not set # CONFIG_SPRUCE is not set +# CONFIG_HDPU is not set +# CONFIG_EV64260 is not set # CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set # CONFIG_MVME5100 is not set # CONFIG_PPLUS is not set # CONFIG_PRPMC750 is not set # CONFIG_PRPMC800 is not set -# CONFIG_PRPMC880 is not set # CONFIG_SANDPOINT is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set +# CONFIG_RADSTONE_PPC7D is not set # CONFIG_PAL4 is not set # CONFIG_GEMINI is not set # CONFIG_EST8260 is not set @@ -105,22 +116,41 @@ CONFIG_CPCI690=y # CONFIG_RPX8260 is not set # CONFIG_TQM8260 is not set # CONFIG_ADS8272 is not set +# CONFIG_PQ2FADS is not set # CONFIG_LITE5200 is not set +# CONFIG_MPC834x_SYS is not set +# CONFIG_EV64360 is not set +CONFIG_GT64260=y +CONFIG_MV64X60=y # # Set bridge options # CONFIG_MV64X60_BASE=0xf1000000 CONFIG_MV64X60_NEW_BASE=0xf1000000 -CONFIG_GT64260=y -CONFIG_MV64X60=y # CONFIG_SMP is not set +CONFIG_HIGHMEM=y +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttyMM0,9600 ip=on" +CONFIG_CMDLINE="console=ttyMM0 ip=on" +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # Bus options @@ -129,7 +159,11 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set # # Advanced setup @@ -146,6 +180,76 @@ CONFIG_TASK_SIZE=0x80000000 CONFIG_BOOT_LOAD=0x00800000 # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -154,6 +258,7 @@ CONFIG_BOOT_LOAD=0x00800000 # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # # Memory Technology Devices (MTD) @@ -177,6 +282,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set @@ -185,7 +291,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set @@ -196,6 +301,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -205,6 +311,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -215,6 +322,7 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -231,71 +339,8 @@ CONFIG_IOSCHED_CFQ=y # # -# Networking support +# Network device support # -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -308,6 +353,11 @@ CONFIG_NETDEVICES=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y @@ -328,6 +378,7 @@ CONFIG_TULIP=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set @@ -337,7 +388,6 @@ CONFIG_NET_PCI=y # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set CONFIG_EEPRO100=y -# CONFIG_EEPRO100_PIO is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -360,13 +410,18 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -390,6 +445,11 @@ CONFIG_EEPRO100=y # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_KGDBOE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -419,14 +479,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -436,6 +488,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -455,6 +513,7 @@ CONFIG_SERIAL_MPSC=y CONFIG_SERIAL_MPSC_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -483,6 +542,11 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # # CONFIG_I2C is not set @@ -493,10 +557,21 @@ CONFIG_GEN_RTC=y # CONFIG_W1 is not set # +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -518,6 +593,11 @@ CONFIG_GEN_RTC=y CONFIG_DUMMY_CONSOLE=y # +# Speakup console speech +# +# CONFIG_SPEAKUP is not set + +# # Sound # # CONFIG_SOUND is not set @@ -525,35 +605,59 @@ CONFIG_DUMMY_CONSOLE=y # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# USB Gadget Support # +# CONFIG_USB_GADGET is not set # -# USB Gadget Support +# MMC/SD Card support # -# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set +# CONFIG_REISER4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set + +# +# XFS support +# # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -574,20 +678,18 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ASFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -605,13 +707,14 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y -# CONFIG_EXPORTFS is not set +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y @@ -621,6 +724,7 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -637,6 +741,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set @@ -648,7 +753,9 @@ CONFIG_CRC32=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SERIAL_TEXT_DEBUG is not set # @@ -669,6 +776,7 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set @@ -684,3 +792,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/configs/k2_defconfig b/arch/ppc/configs/ev64360_defconfig index f10f5a6d2dae..de9bbb791db9 100644 --- a/arch/ppc/configs/k2_defconfig +++ b/arch/ppc/configs/ev64360_defconfig @@ -1,52 +1,60 @@ # # Automatically generated make config: don't edit +# Linux kernel version: 2.6.13-rc5 +# Fri Aug 5 15:18:23 2005 # CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y -CONFIG_STANDALONE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # +CONFIG_LOCALVERSION="" CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set +CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y +# CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support # -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y +# CONFIG_MODULES is not set # # Processor @@ -57,21 +65,33 @@ CONFIG_6xx=y # CONFIG_POWER3 is not set # CONFIG_POWER4 is not set # CONFIG_8xx is not set -# CONFIG_ALTIVEC is not set -# CONFIG_TAU is not set +# CONFIG_E200 is not set +# CONFIG_E500 is not set +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_TAU=y +# CONFIG_TAU_INT is not set +# CONFIG_TAU_AVERAGE is not set +# CONFIG_KEXEC is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PM is not set CONFIG_PPC_STD_MMU=y +CONFIG_NOT_COHERENT_CACHE=y # # Platform options # # CONFIG_PPC_MULTIPLATFORM is not set # CONFIG_APUS is not set +# CONFIG_KATANA is not set # CONFIG_WILLOW is not set +# CONFIG_CPCI690 is not set # CONFIG_PCORE is not set # CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set +# CONFIG_CHESTNUT is not set # CONFIG_SPRUCE is not set +# CONFIG_HDPU is not set +# CONFIG_EV64260 is not set # CONFIG_LOPEC is not set # CONFIG_MCPN765 is not set # CONFIG_MVME5100 is not set @@ -79,24 +99,51 @@ CONFIG_PPC_STD_MMU=y # CONFIG_PRPMC750 is not set # CONFIG_PRPMC800 is not set # CONFIG_SANDPOINT is not set +# CONFIG_RADSTONE_PPC7D is not set # CONFIG_ADIR is not set -CONFIG_K2=y +# CONFIG_K2 is not set # CONFIG_PAL4 is not set # CONFIG_GEMINI is not set # CONFIG_EST8260 is not set +# CONFIG_SBC82xx is not set # CONFIG_SBS8260 is not set -# CONFIG_RPX6 is not set +# CONFIG_RPX8260 is not set # CONFIG_TQM8260 is not set -CONFIG_PPC_GEN550=y -# CONFIG_CPC710_DATA_GATHERING is not set +# CONFIG_ADS8272 is not set +# CONFIG_PQ2FADS is not set +# CONFIG_LITE5200 is not set +# CONFIG_MPC834x_SYS is not set +CONFIG_EV64360=y +CONFIG_MV64360=y +CONFIG_MV64X60=y + +# +# Set bridge options +# +CONFIG_MV64X60_BASE=0xf1000000 +CONFIG_MV64X60_NEW_BASE=0xf1000000 # CONFIG_SMP is not set -# CONFIG_PREEMPT is not set # CONFIG_HIGHMEM is not set -CONFIG_KERNEL_ELF=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_BKL=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=y CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="ip=on" +CONFIG_CMDLINE="console=ttyMM0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2" +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # Bus options @@ -108,31 +155,182 @@ CONFIG_PCI_DOMAINS=y # CONFIG_PCI_NAMES is not set # -# Advanced setup +# PCCARD (PCMCIA/CardBus) support # -# CONFIG_ADVANCED_OPTIONS is not set +# CONFIG_PCCARD is not set # -# Default settings for advanced configuration options are used +# Advanced setup # +CONFIG_ADVANCED_OPTIONS=y CONFIG_HIGHMEM_START=0xfe000000 +# CONFIG_LOWMEM_SIZE_BOOL is not set CONFIG_LOWMEM_SIZE=0x30000000 +# CONFIG_KERNEL_START_BOOL is not set CONFIG_KERNEL_START=0xc0000000 +# CONFIG_TASK_SIZE_BOOL is not set CONFIG_TASK_SIZE=0x80000000 +# CONFIG_CONSISTENT_START_BOOL is not set +CONFIG_CONSISTENT_START=0xff100000 +# CONFIG_CONSISTENT_SIZE_BOOL is not set +CONFIG_CONSISTENT_SIZE=0x00200000 +# CONFIG_BOOT_LOAD_BOOL is not set CONFIG_BOOT_LOAD=0x00800000 # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # # # Generic Driver Options # +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # # Memory Technology Devices (MTD) # -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +# CONFIG_MTD_CFI_I1 is not set +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xff000000 +CONFIG_MTD_PHYSMAP_LEN=0x01000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +CONFIG_MTD_PHRAM=y +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set # # Parallel port support @@ -151,72 +349,32 @@ CONFIG_BOOT_LOAD=0x00800000 # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_CARMEL is not set +# CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" # CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_IDEDISK_STROKE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set -# CONFIG_IDE_TASKFILE_IO is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_PCI_AUTO is not set -CONFIG_BLK_DEV_ADMA=y -# CONFIG_BLK_DEV_AEC62XX is not set -CONFIG_BLK_DEV_ALI15X3=y -# CONFIG_WDC_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set +# CONFIG_IDE is not set # # SCSI device support @@ -248,122 +406,8 @@ CONFIG_BLK_DEV_IDEDMA=y # # -# Networking support -# -CONFIG_NET=y - +# Network device support # -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -# CONFIG_IP_NF_IRC is not set -# CONFIG_IP_NF_TFTP is not set -# CONFIG_IP_NF_AMANDA is not set -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -# CONFIG_IP_NF_MATCH_IPRANGE is not set -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -# CONFIG_IP_NF_MATCH_RECENT is not set -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -# CONFIG_IP_NF_MATCH_LENGTH is not set -# CONFIG_IP_NF_MATCH_TTL is not set -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -# CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_SAME is not set -# CONFIG_IP_NF_NAT_SNMP_BASIC is not set -CONFIG_IP_NF_NAT_FTP=m -# CONFIG_IP_NF_MANGLE is not set -# CONFIG_IP_NF_TARGET_LOG is not set -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -# CONFIG_IP_NF_ARP_MANGLE is not set -CONFIG_IP_NF_COMPAT_IPCHAINS=m -# CONFIG_IP_NF_COMPAT_IPFWADM is not set -# CONFIG_IP_NF_RAW is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -378,38 +422,7 @@ CONFIG_NETDEVICES=y # # Ethernet (10 or 100Mbit) # -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_OAKNET is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_EEPRO100_PIO is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set +# CONFIG_NET_ETHERNET is not set # # Ethernet (1000 Mbit) @@ -421,8 +434,14 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_MV643XX_ETH=y +CONFIG_MV643XX_ETH_0=y +# CONFIG_MV643XX_ETH_1 is not set +# CONFIG_MV643XX_ETH_2 is not set # # Ethernet (10000 Mbit) @@ -448,9 +467,10 @@ CONFIG_EEPRO100=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -465,47 +485,59 @@ CONFIG_EEPRO100=y # # Input device support # -# CONFIG_INPUT is not set +CONFIG_INPUT=y # # Userland interfaces # +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers +# Input Device Drivers # -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set # -# Input Device Drivers +# Hardware I/O ports # +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set # # Character devices # -# CONFIG_VT is not set +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set +# CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # +CONFIG_SERIAL_MPSC=y +CONFIG_SERIAL_MPSC_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_QIC02_TAPE is not set # # IPMI @@ -526,15 +558,31 @@ CONFIG_GEN_RTC=y # # Ftape, the floppy tape device driver # -# CONFIG_FTAPE is not set # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # # CONFIG_I2C is not set +# CONFIG_I2C_SENSOR is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -556,6 +604,12 @@ CONFIG_GEN_RTC=y # CONFIG_FB is not set # +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# # Sound # # CONFIG_SOUND is not set @@ -563,6 +617,8 @@ CONFIG_GEN_RTC=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # @@ -571,18 +627,40 @@ CONFIG_GEN_RTC=y # CONFIG_USB_GADGET is not set # +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set + +# +# XFS support +# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -595,7 +673,8 @@ CONFIG_EXT2_FS=y # # DOS/FAT/NT Filesystems # -# CONFIG_FAT_FS is not set +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # @@ -604,9 +683,9 @@ CONFIG_EXT2_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -620,6 +699,14 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -631,20 +718,22 @@ CONFIG_RAMFS=y # Network File Systems # CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set # @@ -661,20 +750,35 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # -# CONFIG_CRC32 is not set +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y + +# +# Profiling support +# +# CONFIG_PROFILING is not set # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set +CONFIG_LOG_BUF_SHIFT=14 # # Security options # +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # # CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/configs/katana_defconfig b/arch/ppc/configs/katana_defconfig index f0b0d5720154..0f3bb9af9c22 100644 --- a/arch/ppc/configs/katana_defconfig +++ b/arch/ppc/configs/katana_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11 -# Tue Mar 8 17:31:00 2005 +# Linux kernel version: 2.6.13-mm1 +# Thu Sep 1 17:16:03 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y @@ -11,6 +11,7 @@ CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # # Code maturity level options @@ -18,28 +19,31 @@ CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 @@ -68,15 +72,23 @@ CONFIG_6xx=y # CONFIG_POWER3 is not set # CONFIG_POWER4 is not set # CONFIG_8xx is not set +# CONFIG_E200 is not set # CONFIG_E500 is not set +CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y # CONFIG_TAU is not set +# CONFIG_KEXEC is not set # CONFIG_CPU_FREQ is not set -# CONFIG_83xx is not set +# CONFIG_WANT_EARLY_SERIAL is not set CONFIG_PPC_STD_MMU=y CONFIG_NOT_COHERENT_CACHE=y # +# Performance-monitoring counters support +# +# CONFIG_PERFCTR is not set + +# # Platform options # # CONFIG_PPC_MULTIPLATFORM is not set @@ -84,21 +96,18 @@ CONFIG_NOT_COHERENT_CACHE=y CONFIG_KATANA=y # CONFIG_WILLOW is not set # CONFIG_CPCI690 is not set -# CONFIG_PCORE is not set # CONFIG_POWERPMC250 is not set # CONFIG_CHESTNUT is not set # CONFIG_SPRUCE is not set +# CONFIG_HDPU is not set # CONFIG_EV64260 is not set # CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set # CONFIG_MVME5100 is not set # CONFIG_PPLUS is not set # CONFIG_PRPMC750 is not set # CONFIG_PRPMC800 is not set # CONFIG_SANDPOINT is not set # CONFIG_RADSTONE_PPC7D is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set # CONFIG_PAL4 is not set # CONFIG_GEMINI is not set # CONFIG_EST8260 is not set @@ -109,6 +118,8 @@ CONFIG_KATANA=y # CONFIG_ADS8272 is not set # CONFIG_PQ2FADS is not set # CONFIG_LITE5200 is not set +# CONFIG_MPC834x_SYS is not set +# CONFIG_EV64360 is not set CONFIG_MV64360=y CONFIG_MV64X60=y @@ -118,12 +129,28 @@ CONFIG_MV64X60=y CONFIG_MV64X60_BASE=0xf8100000 CONFIG_MV64X60_NEW_BASE=0xf8100000 # CONFIG_SMP is not set +CONFIG_HIGHMEM=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttyMM0,9600 ip=on" +CONFIG_CMDLINE="console=ttyMM0 ip=on" +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # Bus options @@ -132,7 +159,6 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # # PCCARD (PCMCIA/CardBus) support @@ -140,13 +166,10 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # Advanced setup # CONFIG_ADVANCED_OPTIONS=y +# CONFIG_HIGHMEM_START_BOOL is not set CONFIG_HIGHMEM_START=0xfe000000 # CONFIG_LOWMEM_SIZE_BOOL is not set CONFIG_LOWMEM_SIZE=0x30000000 @@ -162,6 +185,76 @@ CONFIG_CONSISTENT_SIZE=0x00400000 CONFIG_BOOT_LOAD=0x00800000 # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -177,8 +270,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set @@ -212,6 +305,7 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set @@ -219,7 +313,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access @@ -229,6 +322,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0xe0000000 CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -278,7 +372,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set @@ -299,6 +392,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -309,6 +403,7 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -325,71 +420,8 @@ CONFIG_IOSCHED_CFQ=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -402,6 +434,11 @@ CONFIG_NETDEVICES=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y @@ -422,6 +459,7 @@ CONFIG_TULIP=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set @@ -448,14 +486,19 @@ CONFIG_E100=y # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set -# CONFIG_E1000 is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set CONFIG_MV643XX_ETH=y CONFIG_MV643XX_ETH_0=y CONFIG_MV643XX_ETH_1=y @@ -464,6 +507,7 @@ CONFIG_MV643XX_ETH_2=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -487,6 +531,11 @@ CONFIG_MV643XX_ETH_2=y # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_KGDBOE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -516,14 +565,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -533,6 +574,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -552,6 +599,7 @@ CONFIG_SERIAL_MPSC=y CONFIG_SERIAL_MPSC_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -580,6 +628,11 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # CONFIG_I2C=y @@ -602,11 +655,10 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set -# CONFIG_I2C_ISA is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -621,14 +673,39 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_MV64XXX=y # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -# CONFIG_I2C_SENSOR is not set +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +CONFIG_SENSORS_M41T00=y +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set @@ -644,36 +721,26 @@ CONFIG_I2C_MV64XXX=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -CONFIG_SENSORS_M41T00=y -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus +# Misc devices # -# CONFIG_W1 is not set # -# Misc devices +# Multimedia Capabilities Port drivers # # @@ -698,6 +765,11 @@ CONFIG_SENSORS_M41T00=y CONFIG_DUMMY_CONSOLE=y # +# Speakup console speech +# +# CONFIG_SPEAKUP is not set + +# # Sound # # CONFIG_SOUND is not set @@ -705,13 +777,9 @@ CONFIG_DUMMY_CONSOLE=y # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -729,25 +797,39 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_INFINIBAND is not set # +# SN Devices +# + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set +# CONFIG_REISER4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # # XFS support # # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -768,20 +850,18 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ASFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -801,12 +881,14 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -815,6 +897,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -831,6 +914,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set @@ -842,8 +926,10 @@ CONFIG_CRC32=y # # Kernel hacking # -# CONFIG_DEBUG_KERNEL is not set # CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SERIAL_TEXT_DEBUG is not set # # Security options diff --git a/arch/ppc/configs/mcpn765_defconfig b/arch/ppc/configs/mcpn765_defconfig deleted file mode 100644 index 899e89a9ea6a..000000000000 --- a/arch/ppc/configs/mcpn765_defconfig +++ /dev/null @@ -1,579 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y - -# -# Code maturity level options -# -# CONFIG_EXPERIMENTAL is not set -CONFIG_CLEAN_COMPILE=y -CONFIG_STANDALONE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_HOTPLUG is not set -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_KMOD is not set - -# -# Processor -# -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -CONFIG_ALTIVEC=y -# CONFIG_TAU is not set -# CONFIG_CPU_FREQ is not set -CONFIG_PPC_STD_MMU=y - -# -# Platform options -# -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_APUS is not set -# CONFIG_WILLOW is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set -# CONFIG_SPRUCE is not set -# CONFIG_LOPEC is not set -CONFIG_MCPN765=y -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_EST8260 is not set -# CONFIG_SBS8260 is not set -# CONFIG_RPX6 is not set -# CONFIG_TQM8260 is not set -CONFIG_PPC_GEN550=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -CONFIG_HIGHMEM=y -CONFIG_KERNEL_ELF=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="ip=on" - -# -# Bus options -# -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set -# CONFIG_PCI_NAMES is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_CARMEL is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_IDEDISK_STROKE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_PCI_AUTO is not set -CONFIG_BLK_DEV_ADMA=y -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_NETFILTER is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_OAKNET is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -CONFIG_NET_TULIP=y -CONFIG_TULIP=y -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set -# CONFIG_DE4X5 is not set -# CONFIG_WINBOND_840 is not set -# CONFIG_DM9102 is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_FDDI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Userland interfaces -# - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# -# Input Device Drivers -# - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_HFSPLUS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=y -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Library routines -# -CONFIG_CRC32=y - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/configs/menf1_defconfig b/arch/ppc/configs/menf1_defconfig deleted file mode 100644 index 321659b5505f..000000000000 --- a/arch/ppc/configs/menf1_defconfig +++ /dev/null @@ -1,621 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_EMBEDDED is not set -CONFIG_FUTEX=y -CONFIG_EPOLL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Platform support -# -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_POWER3 is not set -# CONFIG_8xx is not set - -# -# IBM 4xx options -# -# CONFIG_8260 is not set -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PPC_STD_MMU=y -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_APUS is not set -# CONFIG_WILLOW_2 is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set -# CONFIG_SPRUCE is not set -CONFIG_MENF1=y -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -CONFIG_MPC10X_STORE_GATHERING=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_ALTIVEC is not set -# CONFIG_TAU is not set -# CONFIG_CPU_FREQ is not set - -# -# General setup -# -# CONFIG_HIGHMEM is not set -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_KCORE_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_KERNEL_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_PCI_LEGACY_PROC is not set -# CONFIG_PCI_NAMES is not set -# CONFIG_HOTPLUG is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set -# CONFIG_PPC601_SYNC_FIX is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="ip=on" - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# ATA/IDE/MFM/RLL support -# -CONFIG_IDE=y - -# -# IDE, ATA and ATAPI Block devices -# -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_IDEDISK_STROKE is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_BLK_DEV_IDEPCI is not set - -# -# SCSI support -# -# CONFIG_SCSI is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_TFTP is not set -# CONFIG_IP_NF_AMANDA is not set -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -# CONFIG_IP_NF_NAT_SNMP_BASIC is not set -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -# CONFIG_IP_NF_MANGLE is not set -# CONFIG_IP_NF_TARGET_LOG is not set -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -# CONFIG_IP_NF_COMPAT_IPFWADM is not set -# CONFIG_IPV6 is not set -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_OAKNET is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices (depends on LLC=y) -# -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN_BOOL is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Userland interfaces -# - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set - -# -# Input Device Drivers -# - -# -# Macintosh device drivers -# - -# -# Character devices -# -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# I2C Hardware Sensors Mainboard support -# - -# -# I2C Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_DEVFS_FS is not set -CONFIG_DEVPTS_FS=y -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB is not set -# CONFIG_USB_GADGET is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set - -# -# Library routines -# -# CONFIG_CRC32 is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_KALLSYMS is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/configs/mpc8560_ads_defconfig b/arch/ppc/configs/mpc8560_ads_defconfig index 38a343c9056a..f834fb541ad5 100644 --- a/arch/ppc/configs/mpc8560_ads_defconfig +++ b/arch/ppc/configs/mpc8560_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc1 -# Thu Jan 20 01:24:56 2005 +# Linux kernel version: 2.6.13-rc6 +# Thu Aug 11 18:14:45 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y @@ -11,6 +11,7 @@ CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # # Code maturity level options @@ -18,6 +19,7 @@ CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -29,12 +31,14 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +48,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -59,12 +64,16 @@ CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_POWER3 is not set # CONFIG_POWER4 is not set # CONFIG_8xx is not set +# CONFIG_E200 is not set CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_MATH_EMULATION=y +# CONFIG_KEXEC is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PM is not set CONFIG_85xx=y CONFIG_PPC_INDIRECT_PCI_BE=y @@ -72,9 +81,11 @@ CONFIG_PPC_INDIRECT_PCI_BE=y # Freescale 85xx options # # CONFIG_MPC8540_ADS is not set +# CONFIG_MPC8548_CDS is not set # CONFIG_MPC8555_CDS is not set CONFIG_MPC8560_ADS=y # CONFIG_SBC8560 is not set +# CONFIG_STX_GP3 is not set CONFIG_MPC8560=y # @@ -83,11 +94,25 @@ CONFIG_MPC8560=y CONFIG_CPM2=y # CONFIG_PC_KEYBOARD is not set # CONFIG_SMP is not set -# CONFIG_PREEMPT is not set # CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # Bus options @@ -103,10 +128,6 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # Advanced setup # # CONFIG_ADVANCED_OPTIONS is not set @@ -121,6 +142,69 @@ CONFIG_TASK_SIZE=0x80000000 CONFIG_BOOT_LOAD=0x00800000 # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Device Drivers # @@ -193,6 +277,7 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -209,71 +294,8 @@ CONFIG_IOSCHED_CFQ=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - +# Network device support # -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -311,8 +333,10 @@ CONFIG_MII=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set CONFIG_GIANFAR=y CONFIG_GFAR_NAPI=y @@ -342,6 +366,8 @@ CONFIG_GFAR_NAPI=y # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -368,14 +394,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -385,6 +403,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # # CONFIG_VT is not set @@ -403,11 +427,12 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y CONFIG_SERIAL_CPM_SCC1=y -# CONFIG_SERIAL_CPM_SCC2 is not set +CONFIG_SERIAL_CPM_SCC2=y # CONFIG_SERIAL_CPM_SCC3 is not set -CONFIG_SERIAL_CPM_SCC4=y +# CONFIG_SERIAL_CPM_SCC4 is not set # CONFIG_SERIAL_CPM_SMC1 is not set # CONFIG_SERIAL_CPM_SMC2 is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -436,6 +461,11 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # CONFIG_I2C=y @@ -458,11 +488,11 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -473,19 +503,46 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_SENSOR is not set # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -# CONFIG_I2C_SENSOR is not set +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -496,31 +553,18 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -540,7 +584,6 @@ CONFIG_I2C_MPC=y # Graphics support # # CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -550,13 +593,9 @@ CONFIG_I2C_MPC=y # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -574,10 +613,15 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_INFINIBAND is not set # +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -587,9 +631,15 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set + +# +# XFS support +# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -614,7 +664,6 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set @@ -648,7 +697,7 @@ CONFIG_NFS_FS=y # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -700,7 +749,9 @@ CONFIG_CRC32=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_KGDB_CONSOLE is not set # diff --git a/arch/ppc/configs/oak_defconfig b/arch/ppc/configs/oak_defconfig deleted file mode 100644 index 366cc480cea3..000000000000 --- a/arch/ppc/configs/oak_defconfig +++ /dev/null @@ -1,485 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Platform support -# -CONFIG_PPC=y -CONFIG_PPC32=y -# CONFIG_6xx is not set -CONFIG_40x=y -# CONFIG_POWER3 is not set -# CONFIG_8xx is not set -CONFIG_4xx=y - -# -# IBM 4xx options -# -# CONFIG_ASH is not set -# CONFIG_BEECH is not set -# CONFIG_CEDAR is not set -# CONFIG_CPCI405 is not set -# CONFIG_EP405 is not set -CONFIG_OAK=y -# CONFIG_REDWOOD_4 is not set -# CONFIG_REDWOOD_5 is not set -# CONFIG_REDWOOD_6 is not set -# CONFIG_SYCAMORE is not set -# CONFIG_TIVO is not set -# CONFIG_WALNUT is not set -CONFIG_IBM405_ERR51=y -CONFIG_403GCX=y -# CONFIG_405_DMA is not set -# CONFIG_PM is not set -CONFIG_UART0_TTYS0=y -# CONFIG_UART0_TTYS1 is not set -CONFIG_NOT_COHERENT_CACHE=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_CPU_FREQ is not set - -# -# General setup -# -# CONFIG_HIGHMEM is not set -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PC_KEYBOARD is not set -CONFIG_KCORE_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_KERNEL_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_HOTPLUG is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set -# CONFIG_CMDLINE_BOOL is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# ATA/IDE/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI support -# -# CONFIG_SCSI is not set - -# -# Fusion MPT device support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -CONFIG_OAKNET=y - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices (depends on LLC=y) -# -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN_BOOL is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Userland interfaces -# - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set - -# -# Input Device Drivers -# - -# -# Macintosh device drivers -# - -# -# Character devices -# -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_UNIX98_PTYS is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# I2C Hardware Sensors Mainboard support -# - -# -# I2C Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_DEVFS_FS is not set -CONFIG_TMPFS=y -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# IBM 40x options -# - -# -# USB support -# -# CONFIG_USB_GADGET is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set - -# -# Library routines -# -# CONFIG_CRC32 is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/configs/pcore_defconfig b/arch/ppc/configs/pcore_defconfig deleted file mode 100644 index ed34405a7574..000000000000 --- a/arch/ppc/configs/pcore_defconfig +++ /dev/null @@ -1,716 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_STANDALONE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_HOTPLUG is not set -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor -# -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -CONFIG_ALTIVEC=y -# CONFIG_TAU is not set -# CONFIG_CPU_FREQ is not set -CONFIG_PPC_STD_MMU=y - -# -# Platform options -# -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_APUS is not set -# CONFIG_WILLOW is not set -CONFIG_PCORE=y -# CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set -# CONFIG_SPRUCE is not set -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_EST8260 is not set -# CONFIG_SBS8260 is not set -# CONFIG_RPX6 is not set -# CONFIG_TQM8260 is not set -CONFIG_PPC_GEN550=y -CONFIG_FORCE=y -# CONFIG_MPC10X_STORE_GATHERING is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_KERNEL_ELF=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="ip=on" - -# -# Bus options -# -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set -# CONFIG_PCI_NAMES is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_CARMEL is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -# CONFIG_CHR_DEV_SG is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_REPORT_LUNS is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_MEGARAID is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INIA100 is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_TFTP is not set -# CONFIG_IP_NF_AMANDA is not set -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -# CONFIG_IP_NF_MATCH_IPRANGE is not set -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -# CONFIG_IP_NF_MATCH_RECENT is not set -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -# CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_SAME is not set -# CONFIG_IP_NF_NAT_SNMP_BASIC is not set -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -# CONFIG_IP_NF_MANGLE is not set -# CONFIG_IP_NF_TARGET_LOG is not set -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -# CONFIG_IP_NF_ARP_MANGLE is not set -CONFIG_IP_NF_COMPAT_IPCHAINS=m -# CONFIG_IP_NF_COMPAT_IPFWADM is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_OAKNET is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -CONFIG_NET_TULIP=y -# CONFIG_DE2104X is not set -CONFIG_TULIP=y -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set -# CONFIG_DE4X5 is not set -# CONFIG_WINBOND_840 is not set -# CONFIG_DM9102 is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_EEPRO100_PIO is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Userland interfaces -# - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# -# Input Device Drivers -# - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Library routines -# -CONFIG_CRC32=y - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/configs/rainier_defconfig b/arch/ppc/configs/rainier_defconfig deleted file mode 100644 index 4d4fcdc61bb7..000000000000 --- a/arch/ppc/configs/rainier_defconfig +++ /dev/null @@ -1,599 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# General setup -# -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_KMOD=y - -# -# Platform support -# -CONFIG_PPC=y -CONFIG_PPC32=y -# CONFIG_6xx is not set -CONFIG_40x=y -# CONFIG_POWER3 is not set -# CONFIG_8xx is not set -CONFIG_4xx=y - -# -# IBM 4xx options -# -# CONFIG_ASH is not set -# CONFIG_BEECH is not set -# CONFIG_CEDAR is not set -# CONFIG_CPCI405 is not set -# CONFIG_EP405 is not set -# CONFIG_OAK is not set -# CONFIG_REDWOOD_4 is not set -# CONFIG_REDWOOD_5 is not set -# CONFIG_REDWOOD_6 is not set -# CONFIG_SYCAMORE is not set -# CONFIG_TIVO is not set -CONFIG_WALNUT=y -CONFIG_IBM405_ERR77=y -CONFIG_IBM405_ERR51=y -CONFIG_IBM_OCP=y -CONFIG_BIOS_FIXUP=y -CONFIG_405GP=y -CONFIG_IBM_OPENBIOS=y -CONFIG_405_DMA=y -# CONFIG_PM is not set -CONFIG_UART0_TTYS0=y -# CONFIG_UART0_TTYS1 is not set -CONFIG_NOT_COHERENT_CACHE=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_CPU_FREQ is not set - -# -# General setup -# -# CONFIG_HIGHMEM is not set -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PC_KEYBOARD is not set -CONFIG_KCORE_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_KERNEL_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_PCI_NAMES=y -# CONFIG_HOTPLUG is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set -# CONFIG_CMDLINE_BOOL is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# ATA/IDE/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI support -# -# CONFIG_SCSI is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_OAKNET is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_EEPRO100_PIO is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=y -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -# CONFIG_PPP_ASYNC is not set -# CONFIG_PPP_SYNC_TTY is not set -# CONFIG_PPP_DEFLATE is not set -# CONFIG_PPP_BSDCOMP is not set -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices (depends on LLC=y) -# -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN_BOOL is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Userland interfaces -# - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set - -# -# Input Device Drivers -# - -# -# Macintosh device drivers -# - -# -# Character devices -# -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_IBM_OCP_ALGO is not set -CONFIG_I2C_CHARDEV=y - -# -# I2C Hardware Sensors Mainboard support -# -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C Hardware Sensors Chip support -# -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_I2C_SENSOR is not set - -# -# Mice -# -CONFIG_BUSMOUSE=y -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_WDT is not set -# CONFIG_WDTPCI is not set -# CONFIG_PCWATCHDOG is not set -# CONFIG_ACQUIRE_WDT is not set -# CONFIG_ADVANTECH_WDT is not set -# CONFIG_EUROTECH_WDT is not set -# CONFIG_IB700_WDT is not set -# CONFIG_MIXCOMWD is not set -# CONFIG_SCx200_WDT is not set -# CONFIG_60XX_WDT is not set -# CONFIG_W83877F_WDT is not set -# CONFIG_MACHZ_WDT is not set -# CONFIG_SC520_WDT is not set -# CONFIG_AMD7XX_TCO is not set -# CONFIG_ALIM7101_WDT is not set -# CONFIG_SC1200_WDT is not set -# CONFIG_WAFER_WDT is not set -# CONFIG_CPU5_WDT is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_AUTOFS_FS=y -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_DEVFS_FS is not set -CONFIG_DEVPTS_FS=y -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_EXPORTFS=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# IBM 40x options -# - -# -# USB support -# -# CONFIG_USB is not set -# CONFIG_USB_GADGET is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set - -# -# Library routines -# -# CONFIG_CRC32 is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set -CONFIG_OCP=y - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/configs/redwood_defconfig b/arch/ppc/configs/redwood_defconfig deleted file mode 100644 index 4aa348dcf22c..000000000000 --- a/arch/ppc/configs/redwood_defconfig +++ /dev/null @@ -1,540 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -# CONFIG_STANDALONE is not set -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor -# -# CONFIG_6xx is not set -CONFIG_40x=y -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_CPU_FREQ is not set -CONFIG_4xx=y - -# -# IBM 4xx options -# -# CONFIG_ASH is not set -# CONFIG_BEECH is not set -# CONFIG_CEDAR is not set -# CONFIG_CPCI405 is not set -# CONFIG_EP405 is not set -# CONFIG_OAK is not set -CONFIG_REDWOOD_4=y -# CONFIG_REDWOOD_5 is not set -# CONFIG_REDWOOD_6 is not set -# CONFIG_SYCAMORE is not set -# CONFIG_TIVO is not set -# CONFIG_WALNUT is not set -CONFIG_IBM405_ERR77=y -CONFIG_IBM405_ERR51=y -CONFIG_IBM_OCP=y -CONFIG_STB03xxx=y -CONFIG_IBM_OPENBIOS=y -# CONFIG_405_DMA is not set -# CONFIG_PM is not set -CONFIG_UART0_TTYS0=y -# CONFIG_UART0_TTYS1 is not set -# CONFIG_SERIAL_SICC is not set -CONFIG_NOT_COHERENT_CACHE=y - -# -# Platform options -# -# CONFIG_PC_KEYBOARD is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_KERNEL_ELF=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set - -# -# Bus options -# -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_HOTPLUG is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Generic Driver Options -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Fusion MPT device support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_OAKNET=y - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices -# -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN_BOOL is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Macintosh device drivers -# - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_UNIX98_PTYS is not set - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -CONFIG_I2C_IBM_IIC=y - -# -# I2C Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -# CONFIG_DEVFS_FS is not set -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# IBM 40x options -# - -# -# USB support -# -# CONFIG_USB_GADGET is not set - -# -# Library routines -# -CONFIG_CRC32=y - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -CONFIG_SERIAL_TEXT_DEBUG=y -CONFIG_OCP=y - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index b1457a8a9c0f..1fb92f16acd6 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -15,8 +15,9 @@ extra-y += vmlinux.lds obj-y := entry.o traps.o irq.o idle.o time.o misc.o \ process.o signal.o ptrace.o align.o \ semaphore.o syscalls.o setup.o \ - cputable.o ppc_htab.o perfmon.o + cputable.o ppc_htab.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o +obj-$(CONFIG_E500) += perfmon.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_POWER4) += cpu_setup_power4.o obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o diff --git a/arch/ppc/kernel/cpu_setup_6xx.S b/arch/ppc/kernel/cpu_setup_6xx.S index 468721d9ebd2..ba396438ede3 100644 --- a/arch/ppc/kernel/cpu_setup_6xx.S +++ b/arch/ppc/kernel/cpu_setup_6xx.S @@ -12,10 +12,9 @@ #include <linux/config.h> #include <asm/processor.h> #include <asm/page.h> -#include <asm/ppc_asm.h> #include <asm/cputable.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/cache.h> _GLOBAL(__setup_cpu_601) @@ -249,8 +248,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM) sync isync - /* Enable L2 HW prefetch + /* Enable L2 HW prefetch, if L2 is enabled */ + mfspr r3,SPRN_L2CR + andis. r3,r3,L2CR_L2E@h + beqlr mfspr r3,SPRN_MSSCR0 ori r3,r3,3 sync @@ -324,6 +326,7 @@ _GLOBAL(__save_cpu_setup) cmplwi cr4,r3,0x8002 /* 7457 */ cmplwi cr5,r3,0x8003 /* 7447A */ cmplwi cr6,r3,0x7000 /* 750FX */ + cmplwi cr7,r3,0x8004 /* 7448 */ /* cr1 is 7400 || 7410 */ cror 4*cr1+eq,4*cr1+eq,4*cr2+eq /* cr0 is 74xx */ @@ -331,6 +334,7 @@ _GLOBAL(__save_cpu_setup) cror 4*cr0+eq,4*cr0+eq,4*cr4+eq cror 4*cr0+eq,4*cr0+eq,4*cr1+eq cror 4*cr0+eq,4*cr0+eq,4*cr5+eq + cror 4*cr0+eq,4*cr0+eq,4*cr7+eq bne 1f /* Backup 74xx specific regs */ mfspr r4,SPRN_MSSCR0 @@ -393,6 +397,7 @@ _GLOBAL(__restore_cpu_setup) cmplwi cr4,r3,0x8002 /* 7457 */ cmplwi cr5,r3,0x8003 /* 7447A */ cmplwi cr6,r3,0x7000 /* 750FX */ + cmplwi cr7,r3,0x8004 /* 7448 */ /* cr1 is 7400 || 7410 */ cror 4*cr1+eq,4*cr1+eq,4*cr2+eq /* cr0 is 74xx */ @@ -400,6 +405,7 @@ _GLOBAL(__restore_cpu_setup) cror 4*cr0+eq,4*cr0+eq,4*cr4+eq cror 4*cr0+eq,4*cr0+eq,4*cr1+eq cror 4*cr0+eq,4*cr0+eq,4*cr5+eq + cror 4*cr0+eq,4*cr0+eq,4*cr7+eq bne 2f /* Restore 74xx specific regs */ lwz r4,CS_MSSCR0(r5) diff --git a/arch/ppc/kernel/cpu_setup_power4.S b/arch/ppc/kernel/cpu_setup_power4.S index f2ea1a990f17..7e4fbb653724 100644 --- a/arch/ppc/kernel/cpu_setup_power4.S +++ b/arch/ppc/kernel/cpu_setup_power4.S @@ -14,8 +14,7 @@ #include <asm/page.h> #include <asm/ppc_asm.h> #include <asm/cputable.h> -#include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/cache.h> _GLOBAL(__970_cpu_preinit) diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c index 8a3d74f2531e..546e1ea4cafa 100644 --- a/arch/ppc/kernel/cputable.c +++ b/arch/ppc/kernel/cputable.c @@ -198,10 +198,10 @@ struct cpu_spec cpu_specs[] = { .num_pmcs = 4, .cpu_setup = __setup_cpu_750 }, - { /* 745/755 */ - .pvr_mask = 0xfffff000, - .pvr_value = 0x00083000, - .cpu_name = "745/755", + { /* 750CX (80100 and 8010x?) */ + .pvr_mask = 0xfffffff0, + .pvr_value = 0x00080100, + .cpu_name = "750CX", .cpu_features = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU | @@ -210,11 +210,11 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .num_pmcs = 4, - .cpu_setup = __setup_cpu_750 + .cpu_setup = __setup_cpu_750cx }, - { /* 750CX (80100 and 8010x?) */ + { /* 750CX (82201 and 82202) */ .pvr_mask = 0xfffffff0, - .pvr_value = 0x00080100, + .pvr_value = 0x00082200, .cpu_name = "750CX", .cpu_features = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | @@ -226,10 +226,10 @@ struct cpu_spec cpu_specs[] = { .num_pmcs = 4, .cpu_setup = __setup_cpu_750cx }, - { /* 750CX (82201 and 82202) */ + { /* 750CXe (82214) */ .pvr_mask = 0xfffffff0, - .pvr_value = 0x00082200, - .cpu_name = "750CX", + .pvr_value = 0x00082210, + .cpu_name = "750CXe", .cpu_features = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU | @@ -240,9 +240,9 @@ struct cpu_spec cpu_specs[] = { .num_pmcs = 4, .cpu_setup = __setup_cpu_750cx }, - { /* 750CXe (82214) */ - .pvr_mask = 0xfffffff0, - .pvr_value = 0x00082210, + { /* 750CXe "Gekko" (83214) */ + .pvr_mask = 0xffffffff, + .pvr_value = 0x00083214, .cpu_name = "750CXe", .cpu_features = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | @@ -254,6 +254,20 @@ struct cpu_spec cpu_specs[] = { .num_pmcs = 4, .cpu_setup = __setup_cpu_750cx }, + { /* 745/755 */ + .pvr_mask = 0xfffff000, + .pvr_value = 0x00083000, + .cpu_name = "745/755", + .cpu_features = CPU_FTR_COMMON | + CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | + CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_TAU | + CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP, + .cpu_user_features = COMMON_PPC, + .icache_bsize = 32, + .dcache_bsize = 32, + .num_pmcs = 4, + .cpu_setup = __setup_cpu_750 + }, { /* 750FX rev 1.x */ .pvr_mask = 0xffffff00, .pvr_value = 0x70000100, @@ -536,6 +550,22 @@ struct cpu_spec cpu_specs[] = { .num_pmcs = 6, .cpu_setup = __setup_cpu_745x }, + { /* 7448 */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x80040000, + .cpu_name = "7448", + .cpu_features = CPU_FTR_COMMON | + CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | + CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | + CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR | + CPU_FTR_HAS_HIGH_BATS | CPU_FTR_NEED_COHERENT, + .cpu_user_features = COMMON_PPC | PPC_FEATURE_ALTIVEC_COMP, + .icache_bsize = 32, + .dcache_bsize = 32, + .num_pmcs = 6, + .cpu_setup = __setup_cpu_745x + }, { /* 82xx (8240, 8245, 8260 are all 603e cores) */ .pvr_mask = 0x7fff0000, .pvr_value = 0x00810000, @@ -922,6 +952,26 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, }, + { /* 440GX Rev. F */ + .pvr_mask = 0xf0000fff, + .pvr_value = 0x50000894, + .cpu_name = "440GX Rev. F", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB, + .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU, + .icache_bsize = 32, + .dcache_bsize = 32, + }, + { /* 440SP Rev. A */ + .pvr_mask = 0xff000fff, + .pvr_value = 0x53000891, + .cpu_name = "440SP Rev. A", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB, + .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU, + .icache_bsize = 32, + .dcache_bsize = 32, + }, #endif /* CONFIG_44x */ #ifdef CONFIG_FSL_BOOKE { /* e200z5 */ diff --git a/arch/ppc/kernel/dma-mapping.c b/arch/ppc/kernel/dma-mapping.c index e0c631cf96b0..b566d982806c 100644 --- a/arch/ppc/kernel/dma-mapping.c +++ b/arch/ppc/kernel/dma-mapping.c @@ -393,7 +393,7 @@ EXPORT_SYMBOL(__dma_sync); * __dma_sync_page() implementation for systems using highmem. * In this case, each page of a buffer must be kmapped/kunmapped * in order to have a virtual address for __dma_sync(). This must - * not sleep so kmap_atmomic()/kunmap_atomic() are used. + * not sleep so kmap_atomic()/kunmap_atomic() are used. * * Note: yes, it is possible and correct to have a buffer extend * beyond the first page. diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index cb83045e2edf..03d4886869f3 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -29,7 +29,7 @@ #include <asm/cputable.h> #include <asm/thread_info.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/unistd.h> #undef SHOW_SYSCALLS diff --git a/arch/ppc/kernel/find_name.c b/arch/ppc/kernel/find_name.c deleted file mode 100644 index 3c0fa8e0c077..000000000000 --- a/arch/ppc/kernel/find_name.c +++ /dev/null @@ -1,48 +0,0 @@ -#include <stdio.h> -#include <asm/page.h> -#include <sys/mman.h> -#include <strings.h> -/* - * Finds a given address in the System.map and prints it out - * with its neighbors. -- Cort - */ - -int main(int argc, char **argv) -{ - unsigned long addr, cmp, i; - FILE *f; - char s[256], last[256]; - - if ( argc < 2 ) - { - fprintf(stderr, "Usage: %s <address>\n", argv[0]); - return -1; - } - - for ( i = 1 ; argv[i] ; i++ ) - { - sscanf( argv[i], "%0lx", &addr ); - /* adjust if addr is relative to kernelbase */ - if ( addr < PAGE_OFFSET ) - addr += PAGE_OFFSET; - - if ( (f = fopen( "System.map", "r" )) == NULL ) - { - perror("fopen()\n"); - exit(-1); - } - - while ( !feof(f) ) - { - fgets(s, 255 , f); - sscanf( s, "%0lx", &cmp ); - if ( addr < cmp ) - break; - strcpy( last, s); - } - - printf( "%s%s", last, s ); - } - fclose(f); - return 0; -} diff --git a/arch/ppc/kernel/fpu.S b/arch/ppc/kernel/fpu.S index 6189b26f640f..665d7d34304c 100644 --- a/arch/ppc/kernel/fpu.S +++ b/arch/ppc/kernel/fpu.S @@ -18,7 +18,7 @@ #include <asm/cache.h> #include <asm/thread_info.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> /* * This task wants to use the FPU now. diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S index a931d773715f..1960fb8c259c 100644 --- a/arch/ppc/kernel/head.S +++ b/arch/ppc/kernel/head.S @@ -31,7 +31,7 @@ #include <asm/cache.h> #include <asm/thread_info.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #ifdef CONFIG_APUS #include <asm/amigappc.h> @@ -1023,23 +1023,21 @@ __secondary_start_gemini: andc r4,r4,r3 mtspr SPRN_HID0,r4 sync - bl gemini_prom_init b __secondary_start #endif /* CONFIG_GEMINI */ - .globl __secondary_start_psurge -__secondary_start_psurge: - li r24,1 /* cpu # */ - b __secondary_start_psurge99 - .globl __secondary_start_psurge2 -__secondary_start_psurge2: - li r24,2 /* cpu # */ - b __secondary_start_psurge99 - .globl __secondary_start_psurge3 -__secondary_start_psurge3: - li r24,3 /* cpu # */ - b __secondary_start_psurge99 -__secondary_start_psurge99: - /* we come in here with IR=0 and DR=1, and DBAT 0 + + .globl __secondary_start_pmac_0 +__secondary_start_pmac_0: + /* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */ + li r24,0 + b 1f + li r24,1 + b 1f + li r24,2 + b 1f + li r24,3 +1: + /* on powersurge, we come in here with IR=0 and DR=1, and DBAT 0 set to map the 0xf0000000 - 0xffffffff region */ mfmsr r0 rlwinm r0,r0,0,28,26 /* clear DR (0x10) */ diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S index 69ff3a9961e8..599245b0407e 100644 --- a/arch/ppc/kernel/head_44x.S +++ b/arch/ppc/kernel/head_44x.S @@ -40,7 +40,7 @@ #include <asm/cputable.h> #include <asm/thread_info.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include "head_booke.h" @@ -462,7 +462,11 @@ interrupt_base: /* Watchdog Timer Interrupt */ /* TODO: Add watchdog support */ +#ifdef CONFIG_BOOKE_WDT + CRITICAL_EXCEPTION(0x1020, WatchdogTimer, WatchdogException) +#else CRITICAL_EXCEPTION(0x1020, WatchdogTimer, UnknownException) +#endif /* Data TLB Error Interrupt */ START_EXCEPTION(DataTLBError) diff --git a/arch/ppc/kernel/head_4xx.S b/arch/ppc/kernel/head_4xx.S index 23fb51819ba5..8562b807b37c 100644 --- a/arch/ppc/kernel/head_4xx.S +++ b/arch/ppc/kernel/head_4xx.S @@ -40,7 +40,7 @@ #include <asm/cputable.h> #include <asm/thread_info.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> /* As with the other PowerPC ports, it is expected that when code * execution begins here, the following registers contain valid, yet @@ -448,9 +448,12 @@ label: /* 0x1020 - Watchdog Timer (WDT) Exception */ - +#ifdef CONFIG_BOOKE_WDT + CRITICAL_EXCEPTION(0x1020, WDTException, WatchdogException) +#else CRITICAL_EXCEPTION(0x1020, WDTException, UnknownException) #endif +#endif /* 0x1100 - Data TLB Miss Exception * As the name implies, translation is not in the MMU, so search the diff --git a/arch/ppc/kernel/head_8xx.S b/arch/ppc/kernel/head_8xx.S index eb18cadb3755..cb1a3a54a026 100644 --- a/arch/ppc/kernel/head_8xx.S +++ b/arch/ppc/kernel/head_8xx.S @@ -30,7 +30,7 @@ #include <asm/cputable.h> #include <asm/thread_info.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> /* Macro to make the code more readable. */ #ifdef CONFIG_8xx_CPU6 diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index eb804b7a3cb2..8e52e8408316 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -41,7 +41,7 @@ #include <asm/cputable.h> #include <asm/thread_info.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include "head_booke.h" /* As with the other PowerPC ports, it is expected that when code @@ -564,8 +564,11 @@ interrupt_base: EXCEPTION(0x3100, FixedIntervalTimer, UnknownException, EXC_XFER_EE) /* Watchdog Timer Interrupt */ - /* TODO: Add watchdog support */ +#ifdef CONFIG_BOOKE_WDT + CRITICAL_EXCEPTION(0x3200, WatchdogTimer, WatchdogException) +#else CRITICAL_EXCEPTION(0x3200, WatchdogTimer, UnknownException) +#endif /* Data TLB Error Interrupt */ START_EXCEPTION(DataTLBError) diff --git a/arch/ppc/kernel/idle.c b/arch/ppc/kernel/idle.c index 53547b6de45b..fba29c876b62 100644 --- a/arch/ppc/kernel/idle.c +++ b/arch/ppc/kernel/idle.c @@ -22,6 +22,7 @@ #include <linux/ptrace.h> #include <linux/slab.h> #include <linux/sysctl.h> +#include <linux/cpu.h> #include <asm/pgtable.h> #include <asm/uaccess.h> @@ -35,6 +36,7 @@ void default_idle(void) { void (*powersave)(void); + int cpu = smp_processor_id(); powersave = ppc_md.power_save; @@ -44,7 +46,7 @@ void default_idle(void) #ifdef CONFIG_SMP else { set_thread_flag(TIF_POLLING_NRFLAG); - while (!need_resched()) + while (!need_resched() && !cpu_is_offline(cpu)) barrier(); clear_thread_flag(TIF_POLLING_NRFLAG); } @@ -52,6 +54,8 @@ void default_idle(void) } if (need_resched()) schedule(); + if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) + cpu_die(); } /* diff --git a/arch/ppc/kernel/idle_6xx.S b/arch/ppc/kernel/idle_6xx.S index 25d009c75f7b..1a2194cf6828 100644 --- a/arch/ppc/kernel/idle_6xx.S +++ b/arch/ppc/kernel/idle_6xx.S @@ -20,7 +20,7 @@ #include <asm/cputable.h> #include <asm/thread_info.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #undef DEBUG diff --git a/arch/ppc/kernel/idle_power4.S b/arch/ppc/kernel/idle_power4.S index 73a58ff03900..cc0d535365cd 100644 --- a/arch/ppc/kernel/idle_power4.S +++ b/arch/ppc/kernel/idle_power4.S @@ -20,7 +20,7 @@ #include <asm/cputable.h> #include <asm/thread_info.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #undef DEBUG diff --git a/arch/ppc/kernel/l2cr.S b/arch/ppc/kernel/l2cr.S index c39441048266..861115249b35 100644 --- a/arch/ppc/kernel/l2cr.S +++ b/arch/ppc/kernel/l2cr.S @@ -156,6 +156,26 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) The bit moved on the 7450..... ****/ +BEGIN_FTR_SECTION + /* Disable L2 prefetch on some 745x and try to ensure + * L2 prefetch engines are idle. As explained by errata + * text, we can't be sure they are, we just hope very hard + * that well be enough (sic !). At least I noticed Apple + * doesn't even bother doing the dcbf's here... + */ + mfspr r4,SPRN_MSSCR0 + rlwinm r4,r4,0,0,29 + sync + mtspr SPRN_MSSCR0,r4 + sync + isync + lis r4,KERNELBASE@h + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 +END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) + /* TODO: use HW flush assist when available */ lis r4,0x0002 @@ -230,7 +250,16 @@ END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) oris r3,r3,0x8000 mtspr SPRN_L2CR,r3 sync - + + /* Enable L2 HW prefetch on 744x/745x */ +BEGIN_FTR_SECTION + mfspr r3,SPRN_MSSCR0 + ori r3,r3,3 + sync + mtspr SPRN_MSSCR0,r3 + sync + isync +END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) 4: /* Restore HID0[DPM] to whatever it was before */ diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index ce71b4a01585..90d917d2e856 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -23,7 +23,7 @@ #include <asm/mmu.h> #include <asm/ppc_asm.h> #include <asm/thread_info.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> .text diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index 7b3586a3bf30..854e45beb387 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -80,7 +80,6 @@ fixup_broken_pcnet32(struct pci_dev* dev) if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { dev->vendor = PCI_VENDOR_ID_AMD; pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD); - pci_name_device(dev); } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32); diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index e7d40cc6c1b6..88f6bb7b6964 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -51,9 +51,6 @@ #include <asm/commproc.h> #endif -/* Tell string.h we don't want memcpy etc. as cpp defines */ -#define EXPORT_SYMTAB_STROPS - extern void transfer_to_handler(void); extern void do_IRQ(struct pt_regs *regs); extern void MachineCheckException(struct pt_regs *regs); @@ -263,6 +260,7 @@ EXPORT_SYMBOL(__ashrdi3); EXPORT_SYMBOL(__ashldi3); EXPORT_SYMBOL(__lshrdi3); EXPORT_SYMBOL(memcpy); +EXPORT_SYMBOL(cacheable_memcpy); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(memscan); diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 929e5d1cc7fe..545cfd0fab59 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -41,7 +41,11 @@ #include <asm/xmon.h> #include <asm/ocp.h> -#if defined(CONFIG_85xx) || defined(CONFIG_83xx) || defined(CONFIG_MPC10X_BRIDGE) +#define USES_PPC_SYS (defined(CONFIG_85xx) || defined(CONFIG_83xx) || \ + defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \ + defined(CONFIG_PPC_MPC52xx)) + +#if USES_PPC_SYS #include <asm/ppc_sys.h> #endif @@ -241,7 +245,7 @@ int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "bogomips\t: %lu.%02lu\n", lpj / (500000/HZ), (lpj / (5000/HZ)) % 100); -#if defined(CONFIG_85xx) || defined(CONFIG_83xx) || defined(CONFIG_MPC10X_BRIDGE) +#if USES_PPC_SYS if (cur_ppc_sys_spec->ppc_sys_name) seq_printf(m, "chipset\t\t: %s\n", cur_ppc_sys_spec->ppc_sys_name); @@ -615,6 +619,26 @@ machine_init(unsigned long r3, unsigned long r4, unsigned long r5, if (ppc_md.progress) ppc_md.progress("id mach(): done", 0x200); } +#ifdef CONFIG_BOOKE_WDT +/* Checks wdt=x and wdt_period=xx command-line option */ +int __init early_parse_wdt(char *p) +{ + if (p && strncmp(p, "0", 1) != 0) + booke_wdt_enabled = 1; + + return 0; +} +early_param("wdt", early_parse_wdt); + +int __init early_parse_wdt_period (char *p) +{ + if (p) + booke_wdt_period = simple_strtoul(p, NULL, 0); + + return 0; +} +early_param("wdt_period", early_parse_wdt_period); +#endif /* CONFIG_BOOKE_WDT */ /* Checks "l2cr=xxxx" command-line option */ int __init ppc_setup_l2cr(char *str) diff --git a/arch/ppc/kernel/signal.c b/arch/ppc/kernel/signal.c index 8aaeb6f4e750..2244bf91e593 100644 --- a/arch/ppc/kernel/signal.c +++ b/arch/ppc/kernel/signal.c @@ -759,13 +759,12 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs) else handle_signal(signr, &ka, &info, oldset, regs, newsp); - if (!(ka.sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka.sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka.sa.sa_mask); + if (!(ka.sa.sa_flags & SA_NODEFER)) sigaddset(¤t->blocked, signr); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); return 1; } diff --git a/arch/ppc/kernel/smp.c b/arch/ppc/kernel/smp.c index e70b587b9e51..726fe7ce1747 100644 --- a/arch/ppc/kernel/smp.c +++ b/arch/ppc/kernel/smp.c @@ -45,6 +45,7 @@ cpumask_t cpu_online_map; cpumask_t cpu_possible_map; int smp_hw_index[NR_CPUS]; struct thread_info *secondary_ti; +static struct task_struct *idle_tasks[NR_CPUS]; EXPORT_SYMBOL(cpu_online_map); EXPORT_SYMBOL(cpu_possible_map); @@ -286,7 +287,8 @@ static void __devinit smp_store_cpu_info(int id) void __init smp_prepare_cpus(unsigned int max_cpus) { - int num_cpus, i; + int num_cpus, i, cpu; + struct task_struct *p; /* Fixup boot cpu */ smp_store_cpu_info(smp_processor_id()); @@ -308,6 +310,17 @@ void __init smp_prepare_cpus(unsigned int max_cpus) if (smp_ops->space_timers) smp_ops->space_timers(num_cpus); + + for_each_cpu(cpu) { + if (cpu == smp_processor_id()) + continue; + /* create a process for the processor */ + p = fork_idle(cpu); + if (IS_ERR(p)) + panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p)); + p->thread_info->cpu = cpu; + idle_tasks[cpu] = p; + } } void __devinit smp_prepare_boot_cpu(void) @@ -334,12 +347,17 @@ int __devinit start_secondary(void *unused) set_dec(tb_ticks_per_jiffy); cpu_callin_map[cpu] = 1; - printk("CPU %i done callin...\n", cpu); + printk("CPU %d done callin...\n", cpu); smp_ops->setup_cpu(cpu); - printk("CPU %i done setup...\n", cpu); - local_irq_enable(); + printk("CPU %d done setup...\n", cpu); smp_ops->take_timebase(); - printk("CPU %i done timebase take...\n", cpu); + printk("CPU %d done timebase take...\n", cpu); + + spin_lock(&call_lock); + cpu_set(cpu, cpu_online_map); + spin_unlock(&call_lock); + + local_irq_enable(); cpu_idle(); return 0; @@ -347,17 +365,11 @@ int __devinit start_secondary(void *unused) int __cpu_up(unsigned int cpu) { - struct task_struct *p; char buf[32]; int c; - /* create a process for the processor */ - /* only regs.msr is actually used, and 0 is OK for it */ - p = fork_idle(cpu); - if (IS_ERR(p)) - panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p)); - secondary_ti = p->thread_info; - p->thread_info->cpu = cpu; + secondary_ti = idle_tasks[cpu]->thread_info; + mb(); /* * There was a cache flush loop here to flush the cache @@ -389,7 +401,11 @@ int __cpu_up(unsigned int cpu) printk("Processor %d found.\n", cpu); smp_ops->give_timebase(); - cpu_set(cpu, cpu_online_map); + + /* Wait until cpu puts itself in the online map */ + while (!cpu_online(cpu)) + cpu_relax(); + return 0; } diff --git a/arch/ppc/kernel/swsusp.S b/arch/ppc/kernel/swsusp.S index 55148bb88d39..69773cc1a85f 100644 --- a/arch/ppc/kernel/swsusp.S +++ b/arch/ppc/kernel/swsusp.S @@ -5,7 +5,7 @@ #include <asm/cputable.h> #include <asm/thread_info.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> /* diff --git a/arch/ppc/kernel/syscalls.c b/arch/ppc/kernel/syscalls.c index 124313ce3c09..127f040de9de 100644 --- a/arch/ppc/kernel/syscalls.c +++ b/arch/ppc/kernel/syscalls.c @@ -41,10 +41,6 @@ #include <asm/ipc.h> #include <asm/semaphore.h> -void -check_bugs(void) -{ -} /* * sys_ipc() is the de-multiplexer for the SysV IPC calls.. diff --git a/arch/ppc/kernel/temp.c b/arch/ppc/kernel/temp.c index fe8bb634ead0..26bd8ea35a4e 100644 --- a/arch/ppc/kernel/temp.c +++ b/arch/ppc/kernel/temp.c @@ -21,7 +21,6 @@ #include <linux/interrupt.h> #include <linux/init.h> -#include <asm/segment.h> #include <asm/io.h> #include <asm/reg.h> #include <asm/nvram.h> diff --git a/arch/ppc/kernel/time.c b/arch/ppc/kernel/time.c index bf4ddca5e853..22d7fd1e0aea 100644 --- a/arch/ppc/kernel/time.c +++ b/arch/ppc/kernel/time.c @@ -58,7 +58,6 @@ #include <linux/init.h> #include <linux/profile.h> -#include <asm/segment.h> #include <asm/io.h> #include <asm/nvram.h> #include <asm/cache.h> @@ -169,7 +168,7 @@ void timer_interrupt(struct pt_regs * regs) * We should have an rtc call that only sets the minutes and * seconds like on Intel to avoid problems with non UTC clocks. */ - if ( ppc_md.set_rtc_time && (time_status & STA_UNSYNC) == 0 && + if ( ppc_md.set_rtc_time && ntp_synced() && xtime.tv_sec - last_rtc_update >= 659 && abs((xtime.tv_nsec / 1000) - (1000000-1000000/HZ)) < 500000/HZ && jiffies - wall_jiffies == 1) { @@ -271,10 +270,7 @@ int do_settimeofday(struct timespec *tv) */ last_rtc_update = new_sec - 658; - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irqrestore(&xtime_lock, flags); clock_was_set(); return 0; diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index 9e6ae5696650..961ede87be72 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -118,6 +118,28 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) info.si_code = code; info.si_addr = (void __user *) addr; force_sig_info(signr, &info, current); + + /* + * Init gets no signals that it doesn't have a handler for. + * That's all very well, but if it has caused a synchronous + * exception and we ignore the resulting signal, it will just + * generate the same exception over and over again and we get + * nowhere. Better to kill it and let the kernel panic. + */ + if (current->pid == 1) { + __sighandler_t handler; + + spin_lock_irq(¤t->sighand->siglock); + handler = current->sighand->action[signr-1].sa.sa_handler; + spin_unlock_irq(¤t->sighand->siglock); + if (handler == SIG_DFL) { + /* init has generated a synchronous exception + and it doesn't have a handler for the signal */ + printk(KERN_CRIT "init has generated signal %d " + "but has no handler for it\n", signr); + do_exit(signr); + } + } } /* @@ -849,10 +871,12 @@ void AltivecAssistException(struct pt_regs *regs) } #endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_E500 void PerformanceMonitorException(struct pt_regs *regs) { perf_irq(regs); } +#endif #ifdef CONFIG_FSL_BOOKE void CacheLockingException(struct pt_regs *regs, unsigned long address, @@ -904,6 +928,25 @@ void SPEFloatingPointException(struct pt_regs *regs) } #endif +#ifdef CONFIG_BOOKE_WDT +/* + * Default handler for a Watchdog exception, + * spins until a reboot occurs + */ +void __attribute__ ((weak)) WatchdogHandler(struct pt_regs *regs) +{ + /* Generic WatchdogHandler, implement your own */ + mtspr(SPRN_TCR, mfspr(SPRN_TCR)&(~TCR_WIE)); + return; +} + +void WatchdogException(struct pt_regs *regs) +{ + printk (KERN_EMERG "PowerPC Book-E Watchdog Exception\n"); + WatchdogHandler(regs); +} +#endif + void __init trap_init(void) { } diff --git a/arch/ppc/kernel/vmlinux.lds.S b/arch/ppc/kernel/vmlinux.lds.S index 9353584fb710..17d2db7e537d 100644 --- a/arch/ppc/kernel/vmlinux.lds.S +++ b/arch/ppc/kernel/vmlinux.lds.S @@ -96,6 +96,9 @@ SECTIONS *(.init.text) _einittext = .; } + /* .exit.text is discarded at runtime, not link time, + to deal with references from __bug_table */ + .exit.text : { *(.exit.text) } .init.data : { *(.init.data); __vtop_table_begin = .; @@ -190,5 +193,6 @@ SECTIONS /* Sections to be discarded. */ /DISCARD/ : { *(.exitcall.exit) + *(.exit.data) } } diff --git a/arch/ppc/lib/Makefile b/arch/ppc/lib/Makefile index 1c380e67d435..f1e1fb4144f0 100644 --- a/arch/ppc/lib/Makefile +++ b/arch/ppc/lib/Makefile @@ -4,6 +4,5 @@ obj-y := checksum.o string.o strcase.o dec_and_lock.o div64.o -obj-$(CONFIG_SMP) += locks.o obj-$(CONFIG_8xx) += rheap.o obj-$(CONFIG_CPM2) += rheap.o diff --git a/arch/ppc/lib/dec_and_lock.c b/arch/ppc/lib/dec_and_lock.c index 4ee888070d91..b18f0d9a00fc 100644 --- a/arch/ppc/lib/dec_and_lock.c +++ b/arch/ppc/lib/dec_and_lock.c @@ -11,14 +11,7 @@ * has a cmpxchg, and where atomic->value is an int holding * the value of the atomic (i.e. the high bits aren't used * for a lock or anything like that). - * - * N.B. ATOMIC_DEC_AND_LOCK gets defined in include/linux/spinlock.h - * if spinlocks are empty and thus atomic_dec_and_lock is defined - * to be atomic_dec_and_test - in that case we don't need it - * defined here as well. */ - -#ifndef ATOMIC_DEC_AND_LOCK int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock) { int counter; @@ -43,4 +36,3 @@ int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock) } EXPORT_SYMBOL(_atomic_dec_and_lock); -#endif /* ATOMIC_DEC_AND_LOCK */ diff --git a/arch/ppc/mm/fault.c b/arch/ppc/mm/fault.c index 57d9930843ac..ee5e9f25baf9 100644 --- a/arch/ppc/mm/fault.c +++ b/arch/ppc/mm/fault.c @@ -278,11 +278,7 @@ bad_area: /* User mode accesses cause a SIGSEGV */ if (user_mode(regs)) { - info.si_signo = SIGSEGV; - info.si_errno = 0; - info.si_code = code; - info.si_addr = (void __user *) address; - force_sig_info(SIGSEGV, &info, current); + _exception(SIGSEGV, regs, code, address); return 0; } diff --git a/arch/ppc/mm/hashtable.S b/arch/ppc/mm/hashtable.S index ab83132a7ed0..3ec87c91343e 100644 --- a/arch/ppc/mm/hashtable.S +++ b/arch/ppc/mm/hashtable.S @@ -30,7 +30,7 @@ #include <asm/cputable.h> #include <asm/ppc_asm.h> #include <asm/thread_info.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #ifdef CONFIG_SMP .comm mmu_hash_lock,4 diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index 33ada72c7330..f421a4b337f6 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -560,9 +560,10 @@ void flush_dcache_page(struct page *page) void flush_dcache_icache_page(struct page *page) { #ifdef CONFIG_BOOKE - __flush_dcache_icache(kmap(page)); - kunmap(page); -#elif CONFIG_8xx + void *start = kmap_atomic(page, KM_PPC_SYNC_ICACHE); + __flush_dcache_icache(start); + kunmap_atomic(start, KM_PPC_SYNC_ICACHE); +#elif defined(CONFIG_8xx) /* On 8xx there is no need to kmap since highmem is not supported */ __flush_dcache_icache(page_address(page)); #else diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index 805dd98908a3..76f4476cab44 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -16,11 +16,6 @@ choice depends on 40x default WALNUT -config ASH - bool "Ash" - help - This option enables support for the IBM NP405H evaluation board. - config BUBINGA bool "Bubinga" select WANT_EARLY_SERIAL @@ -37,11 +32,6 @@ config EP405 help This option enables support for the EP405/EP405PC boards. -config OAK - bool "Oak" - help - This option enables support for the IBM 403GCX evaluation board. - config REDWOOD_5 bool "Redwood-5" help @@ -152,13 +142,13 @@ config IBM440EP_ERR42 # All 405-based cores up until the 405GPR and 405EP have this errata. config IBM405_ERR77 bool - depends on 40x && !403GCX && !405GPR + depends on 40x && !403GCX && !405GPR && !405EP default y # All 40x-based cores, up until the 405GPR and 405EP have this errata. config IBM405_ERR51 bool - depends on 40x && !405GPR + depends on 40x && !405GPR && !405EP default y config BOOKE @@ -186,6 +176,7 @@ config BIOS_FIXUP depends on BUBINGA || EP405 || SYCAMORE || WALNUT default y +# OAK doesn't exist but wanted to keep this around for any future 403GCX boards config 403GCX bool depends OAK diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index 844c3b5066e8..1dd6d7fd6a9a 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -1,14 +1,12 @@ # # Makefile for the PowerPC 4xx linux kernel. -obj-$(CONFIG_ASH) += ash.o obj-$(CONFIG_BAMBOO) += bamboo.o obj-$(CONFIG_CPCI405) += cpci405.o obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_EP405) += ep405.o obj-$(CONFIG_BUBINGA) += bubinga.o obj-$(CONFIG_LUAN) += luan.o -obj-$(CONFIG_OAK) += oak.o obj-$(CONFIG_OCOTEA) += ocotea.o obj-$(CONFIG_REDWOOD_5) += redwood5.o obj-$(CONFIG_REDWOOD_6) += redwood6.o diff --git a/arch/ppc/platforms/4xx/ash.c b/arch/ppc/platforms/4xx/ash.c deleted file mode 100644 index ce2911793716..000000000000 --- a/arch/ppc/platforms/4xx/ash.c +++ /dev/null @@ -1,250 +0,0 @@ -/* - * arch/ppc/platforms/4xx/ash.c - * - * Support for the IBM NP405H ash eval board - * - * Author: Armin Kuster <akuster@mvista.com> - * - * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include <linux/config.h> -#include <linux/init.h> -#include <linux/pagemap.h> -#include <linux/pci.h> - -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <asm/io.h> -#include <asm/ocp.h> -#include <asm/ibm_ocp_pci.h> -#include <asm/todc.h> - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -void *ash_rtc_base; - -/* Some IRQs unique to Walnut. - * Used by the generic 405 PCI setup functions in ppc4xx_pci.c - */ -int __init -ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {24, 24, 24, 24}, /* IDSEL 1 - PCI slot 1 */ - {25, 25, 25, 25}, /* IDSEL 2 - PCI slot 2 */ - {26, 26, 26, 26}, /* IDSEL 3 - PCI slot 3 */ - {27, 27, 27, 27}, /* IDSEL 4 - PCI slot 4 */ - }; - - const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -void __init -ash_setup_arch(void) -{ - ppc4xx_setup_arch(); - - ibm_ocp_set_emac(0, 3); - -#ifdef CONFIG_DEBUG_BRINGUP - int i; - printk("\n"); - printk("machine\t: %s\n", PPC4xx_MACHINE_NAME); - printk("\n"); - printk("bi_s_version\t %s\n", bip->bi_s_version); - printk("bi_r_version\t %s\n", bip->bi_r_version); - printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize, - bip->bi_memsize / (1024 * 1000)); - for (i = 0; i < EMAC_NUMS; i++) { - printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", i, - bip->bi_enetaddr[i][0], bip->bi_enetaddr[i][1], - bip->bi_enetaddr[i][2], bip->bi_enetaddr[i][3], - bip->bi_enetaddr[i][4], bip->bi_enetaddr[i][5]); - } - printk("bi_pci_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0, - bip->bi_pci_enetaddr[0], bip->bi_pci_enetaddr[1], - bip->bi_pci_enetaddr[2], bip->bi_pci_enetaddr[3], - bip->bi_pci_enetaddr[4], bip->bi_pci_enetaddr[5]); - - printk("bi_intfreq\t 0x%8.8x\t clock:\t %dMhz\n", - bip->bi_intfreq, bip->bi_intfreq / 1000000); - - printk("bi_busfreq\t 0x%8.8x\t plb bus clock:\t %dMHz\n", - bip->bi_busfreq, bip->bi_busfreq / 1000000); - printk("bi_pci_busfreq\t 0x%8.8x\t pci bus clock:\t %dMHz\n", - bip->bi_pci_busfreq, bip->bi_pci_busfreq / 1000000); - - printk("\n"); -#endif - /* RTC step for ash */ - ash_rtc_base = (void *) ASH_RTC_VADDR; - TODC_INIT(TODC_TYPE_DS1743, ash_rtc_base, ash_rtc_base, ash_rtc_base, - 8); -} - -void __init -bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip) -{ - /* - * Expected PCI mapping: - * - * PLB addr PCI memory addr - * --------------------- --------------------- - * 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff - * 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff - * - * PLB addr PCI io addr - * --------------------- --------------------- - * e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000 - * - * The following code is simplified by assuming that the bootrom - * has been well behaved in following this mapping. - */ - -#ifdef DEBUG - int i; - - printk("ioremap PCLIO_BASE = 0x%x\n", pcip); - printk("PCI bridge regs before fixup \n"); - for (i = 0; i <= 2; i++) { - printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma))); - printk(" pmm%dla\t0x%x\n", i, in_le32(&(pcip->pmm[i].la))); - printk(" pmm%dpcila\t0x%x\n", i, - in_le32(&(pcip->pmm[i].pcila))); - printk(" pmm%dpciha\t0x%x\n", i, - in_le32(&(pcip->pmm[i].pciha))); - } - printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms))); - printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la))); - printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms))); - printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la))); - for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) { - early_read_config_dword(hose, hose->first_busno, - PCI_FUNC(hose->first_busno), bar, - &bar_response); - DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n", - hose->first_busno, PCI_SLOT(hose->first_busno), - PCI_FUNC(hose->first_busno), bar, bar_response); - } - -#endif - if (ppc_md.progress) - ppc_md.progress("bios_fixup(): enter", 0x800); - - /* added for IBM boot rom version 1.15 bios bar changes -AK */ - - /* Disable region first */ - out_le32((void *) &(pcip->pmm[0].ma), 0x00000000); - /* PLB starting addr, PCI: 0x80000000 */ - out_le32((void *) &(pcip->pmm[0].la), 0x80000000); - /* PCI start addr, 0x80000000 */ - out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE); - /* 512MB range of PLB to PCI */ - out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000); - /* Enable no pre-fetch, enable region */ - out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff - - (PPC405_PCI_UPPER_MEM - - PPC405_PCI_MEM_BASE)) | 0x01)); - - /* Disable region one */ - out_le32((void *) &(pcip->pmm[1].ma), 0x00000000); - out_le32((void *) &(pcip->pmm[1].la), 0x00000000); - out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000); - out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000); - out_le32((void *) &(pcip->pmm[1].ma), 0x00000000); - - /* Disable region two */ - out_le32((void *) &(pcip->pmm[2].ma), 0x00000000); - out_le32((void *) &(pcip->pmm[2].la), 0x00000000); - out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000); - out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000); - out_le32((void *) &(pcip->pmm[2].ma), 0x00000000); - - /* Enable PTM1 and PTM2, mapped to PLB address 0. */ - - out_le32((void *) &(pcip->ptm1la), 0x00000000); - out_le32((void *) &(pcip->ptm1ms), 0x00000001); - out_le32((void *) &(pcip->ptm2la), 0x00000000); - out_le32((void *) &(pcip->ptm2ms), 0x00000001); - - /* Write zero to PTM1 BAR. */ - - early_write_config_dword(hose, hose->first_busno, - PCI_FUNC(hose->first_busno), - PCI_BASE_ADDRESS_1, - 0x00000000); - - /* Disable PTM2 (unused) */ - - out_le32((void *) &(pcip->ptm2la), 0x00000000); - out_le32((void *) &(pcip->ptm2ms), 0x00000000); - - /* end work arround */ - if (ppc_md.progress) - ppc_md.progress("bios_fixup(): done", 0x800); - -#ifdef DEBUG - printk("PCI bridge regs after fixup \n"); - for (i = 0; i <= 2; i++) { - printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma))); - printk(" pmm%dla\t0x%x\n", i, in_le32(&(pcip->pmm[i].la))); - printk(" pmm%dpcila\t0x%x\n", i, - in_le32(&(pcip->pmm[i].pcila))); - printk(" pmm%dpciha\t0x%x\n", i, - in_le32(&(pcip->pmm[i].pciha))); - } - printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms))); - printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la))); - printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms))); - printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la))); - - for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) { - early_read_config_dword(hose, hose->first_busno, - PCI_FUNC(hose->first_busno), bar, - &bar_response); - DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n", - hose->first_busno, PCI_SLOT(hose->first_busno), - PCI_FUNC(hose->first_busno), bar, bar_response); - } - - -#endif -} - -void __init -ash_map_io(void) -{ - ppc4xx_map_io(); - io_block_mapping(ASH_RTC_VADDR, ASH_RTC_PADDR, ASH_RTC_SIZE, _PAGE_IO); -} - -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - ppc4xx_init(r3, r4, r5, r6, r7); - - ppc_md.setup_arch = ash_setup_arch; - ppc_md.setup_io_mappings = ash_map_io; - -#ifdef CONFIG_PPC_RTC - ppc_md.time_init = todc_time_init; - ppc_md.set_rtc_time = todc_set_rtc_time; - ppc_md.get_rtc_time = todc_get_rtc_time; - ppc_md.nvram_read_val = todc_direct_read_val; - ppc_md.nvram_write_val = todc_direct_write_val; -#endif -} diff --git a/arch/ppc/platforms/4xx/ash.h b/arch/ppc/platforms/4xx/ash.h deleted file mode 100644 index 5f7448ea418d..000000000000 --- a/arch/ppc/platforms/4xx/ash.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * arch/ppc/platforms/4xx/ash.h - * - * Macros, definitions, and data structures specific to the IBM PowerPC - * Ash eval board. - * - * Author: Armin Kuster <akuster@mvista.com> - * - * 2000-2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_ASH_H__ -#define __ASM_ASH_H__ -#include <platforms/4xx/ibmnp405h.h> - -#ifndef __ASSEMBLY__ -/* - * Data structure defining board information maintained by the boot - * ROM on IBM's "Ash" evaluation board. An effort has been made to - * keep the field names consistent with the 8xx 'bd_t' board info - * structures. - */ - -typedef struct board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[4][6]; /* Local Ethernet MAC address */ - unsigned char bi_pci_enetaddr[6]; - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI speed in Hz */ -} bd_t; - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - -/* Memory map for the IBM "Ash" NP405H evaluation board. - */ - -extern void *ash_rtc_base; -#define ASH_RTC_PADDR ((uint)0xf0000000) -#define ASH_RTC_VADDR ASH_RTC_PADDR -#define ASH_RTC_SIZE ((uint)8*1024) - - -/* Early initialization address mapping for block_io. - * Standard 405GP map. - */ -#define PPC4xx_PCI_IO_PADDR ((uint)PPC405_PCI_PHY_IO_BASE) -#define PPC4xx_PCI_IO_VADDR PPC4xx_PCI_IO_PADDR -#define PPC4xx_PCI_IO_SIZE ((uint)64*1024) -#define PPC4xx_PCI_CFG_PADDR ((uint)PPC405_PCI_CONFIG_ADDR) -#define PPC4xx_PCI_CFG_VADDR PPC4xx_PCI_CFG_PADDR -#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024) -#define PPC4xx_PCI_LCFG_PADDR ((uint)0xef400000) -#define PPC4xx_PCI_LCFG_VADDR PPC4xx_PCI_LCFG_PADDR -#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024) -#define PPC4xx_ONB_IO_PADDR ((uint)0xef600000) -#define PPC4xx_ONB_IO_VADDR PPC4xx_ONB_IO_PADDR -#define PPC4xx_ONB_IO_SIZE ((uint)4*1024) - -#define NR_BOARD_IRQS 32 - -#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK -#define BASE_BAUD 201600 -#else -#define BASE_BAUD 691200 -#endif - -#define PPC4xx_MACHINE_NAME "IBM NP405H Ash" - -extern char pci_irq_table[][4]; - - -#endif /* !__ASSEMBLY__ */ -#endif /* __ASM_ASH_H__ */ -#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c index f116787b0b76..ac391d463d78 100644 --- a/arch/ppc/platforms/4xx/bamboo.c +++ b/arch/ppc/platforms/4xx/bamboo.c @@ -52,13 +52,6 @@ #include <syslib/gen550.h> #include <syslib/ibm440gx_common.h> -/* - * This is a horrible kludge, we eventually need to abstract this - * generic PHY stuff, so the standard phy mode defines can be - * easily used from arch code. - */ -#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h" - bd_t __res; static struct ibm44x_clocks clocks __initdata; @@ -123,33 +116,69 @@ bamboo_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) static void __init bamboo_set_emacdata(void) { - unsigned char * selection1_base; + u8 * base_addr; struct ocp_def *def; struct ocp_func_emac_data *emacdata; - u8 selection1_val; + u8 val; int mode; + u32 excluded = 0; - selection1_base = ioremap64(BAMBOO_FPGA_SELECTION1_REG_ADDR, 16); - selection1_val = readb(selection1_base); - iounmap((void *) selection1_base); - if (BAMBOO_SEL_MII(selection1_val)) + base_addr = ioremap64(BAMBOO_FPGA_SELECTION1_REG_ADDR, 16); + val = readb(base_addr); + iounmap((void *) base_addr); + if (BAMBOO_SEL_MII(val)) mode = PHY_MODE_MII; - else if (BAMBOO_SEL_RMII(selection1_val)) + else if (BAMBOO_SEL_RMII(val)) mode = PHY_MODE_RMII; else mode = PHY_MODE_SMII; - /* Set mac_addr and phy mode for each EMAC */ + /* + * SW2 on the Bamboo is used for ethernet configuration and is accessed + * via the CONFIG2 register in the FPGA. If the ANEG pin is set, + * overwrite the supported features with the settings in SW2. + * + * This is used as a workaround for the improperly biased RJ-45 sockets + * on the Rev. 0 Bamboo. By default only 10baseT is functional. + * Removing inductors L17 and L18 from the board allows 100baseT, but + * disables 10baseT. The Rev. 1 has no such limitations. + */ + + base_addr = ioremap64(BAMBOO_FPGA_CONFIG2_REG_ADDR, 8); + val = readb(base_addr); + iounmap((void *) base_addr); + if (!BAMBOO_AUTONEGOTIATE(val)) { + excluded |= SUPPORTED_Autoneg; + if (BAMBOO_FORCE_100Mbps(val)) { + excluded |= SUPPORTED_10baseT_Full; + excluded |= SUPPORTED_10baseT_Half; + if (BAMBOO_FULL_DUPLEX_EN(val)) + excluded |= SUPPORTED_100baseT_Half; + else + excluded |= SUPPORTED_100baseT_Full; + } else { + excluded |= SUPPORTED_100baseT_Full; + excluded |= SUPPORTED_100baseT_Half; + if (BAMBOO_FULL_DUPLEX_EN(val)) + excluded |= SUPPORTED_10baseT_Half; + else + excluded |= SUPPORTED_10baseT_Full; + } + } + + /* Set mac_addr, phy mode and unsupported phy features for each EMAC */ def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0); emacdata = def->additions; memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6); emacdata->phy_mode = mode; + emacdata->phy_feat_exc = excluded; def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1); emacdata = def->additions; memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6); emacdata->phy_mode = mode; + emacdata->phy_feat_exc = excluded; } static int diff --git a/arch/ppc/platforms/4xx/bamboo.h b/arch/ppc/platforms/4xx/bamboo.h index 63d714504148..5c0192826494 100644 --- a/arch/ppc/platforms/4xx/bamboo.h +++ b/arch/ppc/platforms/4xx/bamboo.h @@ -88,7 +88,7 @@ #define STD_UART_OP(num) \ { 0, BASE_BAUD, 0, UART##num##_INT, \ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ - iomem_base: UART##num##_IO_BASE, \ + iomem_base: (void*)UART##num##_IO_BASE, \ io_type: SERIAL_IO_MEM}, #define SERIAL_PORT_DFNS \ diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c index 509e69a095f0..d6b2b1965dcb 100644 --- a/arch/ppc/platforms/4xx/ebony.c +++ b/arch/ppc/platforms/4xx/ebony.c @@ -55,13 +55,6 @@ #include <syslib/gen550.h> #include <syslib/ibm440gp_common.h> -/* - * This is a horrible kludge, we eventually need to abstract this - * generic PHY stuff, so the standard phy mode defines can be - * easily used from arch code. - */ -#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h" - bd_t __res; static struct ibm44x_clocks clocks __initdata; @@ -98,15 +91,10 @@ ebony_calibrate_decr(void) * on Rev. C silicon then errata forces us to * use the internal clock. */ - switch (PVR_REV(mfspr(SPRN_PVR))) { - case PVR_REV(PVR_440GP_RB): - freq = EBONY_440GP_RB_SYSCLK; - break; - case PVR_REV(PVR_440GP_RC1): - default: - freq = EBONY_440GP_RC_SYSCLK; - break; - } + if (strcmp(cur_cpu_spec[0]->cpu_name, "440GP Rev. B") == 0) + freq = EBONY_440GP_RB_SYSCLK; + else + freq = EBONY_440GP_RC_SYSCLK; ibm44x_calibrate_decr(freq); } diff --git a/arch/ppc/platforms/4xx/ibm405ep.c b/arch/ppc/platforms/4xx/ibm405ep.c index 6d44567f4dd2..093b28d27a41 100644 --- a/arch/ppc/platforms/4xx/ibm405ep.c +++ b/arch/ppc/platforms/4xx/ibm405ep.c @@ -33,6 +33,7 @@ static struct ocp_func_mal_data ibm405ep_mal0_def = { .txde_irq = 13, /* TX Descriptor Error IRQ */ .rxde_irq = 14, /* RX Descriptor Error IRQ */ .serr_irq = 10, /* MAL System Error IRQ */ + .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */ }; OCP_SYSFS_MAL_DATA() diff --git a/arch/ppc/platforms/4xx/ibm405gp.c b/arch/ppc/platforms/4xx/ibm405gp.c index dfd7ef3ba5f8..e5700469a682 100644 --- a/arch/ppc/platforms/4xx/ibm405gp.c +++ b/arch/ppc/platforms/4xx/ibm405gp.c @@ -46,6 +46,7 @@ static struct ocp_func_mal_data ibm405gp_mal0_def = { .txde_irq = 13, /* TX Descriptor Error IRQ */ .rxde_irq = 14, /* RX Descriptor Error IRQ */ .serr_irq = 10, /* MAL System Error IRQ */ + .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */ }; OCP_SYSFS_MAL_DATA() diff --git a/arch/ppc/platforms/4xx/ibm405gpr.c b/arch/ppc/platforms/4xx/ibm405gpr.c index 01c8ccbc7214..cd0d00d8e8ee 100644 --- a/arch/ppc/platforms/4xx/ibm405gpr.c +++ b/arch/ppc/platforms/4xx/ibm405gpr.c @@ -42,6 +42,7 @@ static struct ocp_func_mal_data ibm405gpr_mal0_def = { .txde_irq = 13, /* TX Descriptor Error IRQ */ .rxde_irq = 14, /* RX Descriptor Error IRQ */ .serr_irq = 10, /* MAL System Error IRQ */ + .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */ }; OCP_SYSFS_MAL_DATA() diff --git a/arch/ppc/platforms/4xx/ibm440ep.c b/arch/ppc/platforms/4xx/ibm440ep.c index 284da01f1ffd..4712de8ff80f 100644 --- a/arch/ppc/platforms/4xx/ibm440ep.c +++ b/arch/ppc/platforms/4xx/ibm440ep.c @@ -53,6 +53,7 @@ static struct ocp_func_mal_data ibm440ep_mal0_def = { .txde_irq = 33, /* TX Descriptor Error IRQ */ .rxde_irq = 34, /* RX Descriptor Error IRQ */ .serr_irq = 32, /* MAL System Error IRQ */ + .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */ }; OCP_SYSFS_MAL_DATA() diff --git a/arch/ppc/platforms/4xx/ibm440gp.c b/arch/ppc/platforms/4xx/ibm440gp.c index 27615ef8309c..d926245e8b3e 100644 --- a/arch/ppc/platforms/4xx/ibm440gp.c +++ b/arch/ppc/platforms/4xx/ibm440gp.c @@ -56,6 +56,7 @@ static struct ocp_func_mal_data ibm440gp_mal0_def = { .txde_irq = 33, /* TX Descriptor Error IRQ */ .rxde_irq = 34, /* RX Descriptor Error IRQ */ .serr_irq = 32, /* MAL System Error IRQ */ + .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */ }; OCP_SYSFS_MAL_DATA() diff --git a/arch/ppc/platforms/4xx/ibm440gx.c b/arch/ppc/platforms/4xx/ibm440gx.c index 1f38f42835b4..956f45e4ef97 100644 --- a/arch/ppc/platforms/4xx/ibm440gx.c +++ b/arch/ppc/platforms/4xx/ibm440gx.c @@ -84,6 +84,7 @@ static struct ocp_func_mal_data ibm440gx_mal0_def = { .txde_irq = 33, /* TX Descriptor Error IRQ */ .rxde_irq = 34, /* RX Descriptor Error IRQ */ .serr_irq = 32, /* MAL System Error IRQ */ + .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */ }; OCP_SYSFS_MAL_DATA() diff --git a/arch/ppc/platforms/4xx/ibm440sp.c b/arch/ppc/platforms/4xx/ibm440sp.c index fa3e003a0db9..feb17e41ef69 100644 --- a/arch/ppc/platforms/4xx/ibm440sp.c +++ b/arch/ppc/platforms/4xx/ibm440sp.c @@ -43,6 +43,7 @@ static struct ocp_func_mal_data ibm440sp_mal0_def = { .txde_irq = 34, /* TX Descriptor Error IRQ */ .rxde_irq = 35, /* RX Descriptor Error IRQ */ .serr_irq = 33, /* MAL System Error IRQ */ + .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */ }; OCP_SYSFS_MAL_DATA() diff --git a/arch/ppc/platforms/4xx/ibmnp405h.c b/arch/ppc/platforms/4xx/ibmnp405h.c index ecdc5be6ae28..a477a78f4902 100644 --- a/arch/ppc/platforms/4xx/ibmnp405h.c +++ b/arch/ppc/platforms/4xx/ibmnp405h.c @@ -34,7 +34,7 @@ static struct ocp_func_emac_data ibmnp405h_emac1_def = { .zmii_mux = 1, /* ZMII input of this EMAC */ .mal_idx = 0, /* MAL device index */ .mal_rx_chan = 1, /* MAL rx channel number */ - .mal_tx_chan = 1, /* MAL tx channel number */ + .mal_tx_chan = 2, /* MAL tx channel number */ .wol_irq = 41, /* WOL interrupt number */ .mdio_idx = -1, /* No shared MDIO */ .tah_idx = -1, /* No TAH */ @@ -46,7 +46,7 @@ static struct ocp_func_emac_data ibmnp405h_emac2_def = { .zmii_mux = 2, /* ZMII input of this EMAC */ .mal_idx = 0, /* MAL device index */ .mal_rx_chan = 2, /* MAL rx channel number */ - .mal_tx_chan = 2, /* MAL tx channel number */ + .mal_tx_chan = 4, /* MAL tx channel number */ .wol_irq = 41, /* WOL interrupt number */ .mdio_idx = -1, /* No shared MDIO */ .tah_idx = -1, /* No TAH */ @@ -58,7 +58,7 @@ static struct ocp_func_emac_data ibmnp405h_emac3_def = { .zmii_mux = 3, /* ZMII input of this EMAC */ .mal_idx = 0, /* MAL device index */ .mal_rx_chan = 3, /* MAL rx channel number */ - .mal_tx_chan = 3, /* MAL tx channel number */ + .mal_tx_chan = 6, /* MAL tx channel number */ .wol_irq = 41, /* WOL interrupt number */ .mdio_idx = -1, /* No shared MDIO */ .tah_idx = -1, /* No TAH */ @@ -73,6 +73,7 @@ static struct ocp_func_mal_data ibmnp405h_mal0_def = { .txde_irq = 46, /* TX Descriptor Error IRQ */ .rxde_irq = 47, /* RX Descriptor Error IRQ */ .serr_irq = 45, /* MAL System Error IRQ */ + .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */ }; OCP_SYSFS_MAL_DATA() diff --git a/arch/ppc/platforms/4xx/ibmstb4.c b/arch/ppc/platforms/4xx/ibmstb4.c index 874d16bab73c..d90627b68faa 100644 --- a/arch/ppc/platforms/4xx/ibmstb4.c +++ b/arch/ppc/platforms/4xx/ibmstb4.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <asm/ocp.h> +#include <asm/ppc4xx_pic.h> #include <platforms/4xx/ibmstb4.h> static struct ocp_func_iic_data ibmstb4_iic0_def = { @@ -72,12 +73,51 @@ struct ocp_def core_ocp[] __initdata = { .irq = IDE0_IRQ, .pm = OCP_CPM_NA, }, - { .vendor = OCP_VENDOR_IBM, - .function = OCP_FUNC_USB, - .paddr = USB0_BASE, - .irq = USB0_IRQ, - .pm = OCP_CPM_NA, - }, { .vendor = OCP_VENDOR_INVALID, } }; + +/* Polarity and triggering settings for internal interrupt sources */ +struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = { + { .polarity = 0x7fffff01, + .triggering = 0x00000000, + .ext_irq_mask = 0x0000007e, /* IRQ0 - IRQ5 */ + } +}; + +static struct resource ohci_usb_resources[] = { + [0] = { + .start = USB0_BASE, + .end = USB0_BASE + USB0_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = USB0_IRQ, + .end = USB0_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 dma_mask = 0xffffffffULL; + +static struct platform_device ohci_usb_device = { + .name = "ppc-soc-ohci", + .id = 0, + .num_resources = ARRAY_SIZE(ohci_usb_resources), + .resource = ohci_usb_resources, + .dev = { + .dma_mask = &dma_mask, + .coherent_dma_mask = 0xffffffffULL, + } +}; + +static struct platform_device *ibmstb4_devs[] __initdata = { + &ohci_usb_device, +}; + +static int __init +ibmstb4_platform_add_devices(void) +{ + return platform_add_devices(ibmstb4_devs, ARRAY_SIZE(ibmstb4_devs)); +} +arch_initcall(ibmstb4_platform_add_devices); diff --git a/arch/ppc/platforms/4xx/ibmstb4.h b/arch/ppc/platforms/4xx/ibmstb4.h index bcb4b1ee71f2..9f21d4c88a3d 100644 --- a/arch/ppc/platforms/4xx/ibmstb4.h +++ b/arch/ppc/platforms/4xx/ibmstb4.h @@ -73,9 +73,9 @@ #define OPB0_BASE 0x40000000 #define GPIO0_BASE 0x40060000 +#define USB0_BASE 0x40010000 +#define USB0_SIZE 0xA0 #define USB0_IRQ 18 -#define USB0_BASE STB04xxx_MAP_IO_ADDR(0x40010000) -#define USB0_EXTENT 4096 #define IIC_NUMS 2 #define UART_NUMS 3 diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c index 95359f748e7b..a38e6f9ef858 100644 --- a/arch/ppc/platforms/4xx/luan.c +++ b/arch/ppc/platforms/4xx/luan.c @@ -53,13 +53,6 @@ #include <syslib/ibm440gx_common.h> #include <syslib/ibm440sp_common.h> -/* - * This is a horrible kludge, we eventually need to abstract this - * generic PHY stuff, so the standard phy mode defines can be - * easily used from arch code. - */ -#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h" - bd_t __res; static struct ibm44x_clocks clocks __initdata; diff --git a/arch/ppc/platforms/4xx/luan.h b/arch/ppc/platforms/4xx/luan.h index 09b444c87816..bbe7d0766db8 100644 --- a/arch/ppc/platforms/4xx/luan.h +++ b/arch/ppc/platforms/4xx/luan.h @@ -55,7 +55,7 @@ #define STD_UART_OP(num) \ { 0, BASE_BAUD, 0, UART##num##_INT, \ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ - iomem_base: UART##num##_IO_BASE, \ + iomem_base: (void*)UART##num##_IO_BASE, \ io_type: SERIAL_IO_MEM}, #define SERIAL_PORT_DFNS \ diff --git a/arch/ppc/platforms/4xx/oak.c b/arch/ppc/platforms/4xx/oak.c deleted file mode 100644 index fa25ee1fa733..000000000000 --- a/arch/ppc/platforms/4xx/oak.c +++ /dev/null @@ -1,255 +0,0 @@ -/* - * - * Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu> - * - * Module name: oak.c - * - * Description: - * Architecture- / platform-specific boot-time initialization code for - * the IBM PowerPC 403GCX "Oak" evaluation board. Adapted from original - * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek - * <dan@net4x.com>. - * - */ - -#include <linux/config.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/threads.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/initrd.h> -#include <linux/irq.h> -#include <linux/seq_file.h> - -#include <asm/board.h> -#include <asm/machdep.h> -#include <asm/page.h> -#include <asm/bootinfo.h> -#include <asm/ppc4xx_pic.h> -#include <asm/time.h> - -#include "oak.h" - -/* Function Prototypes */ - -extern void abort(void); - -/* Global Variables */ - -unsigned char __res[sizeof(bd_t)]; - - -/* - * void __init oak_init() - * - * Description: - * This routine... - * - * Input(s): - * r3 - Optional pointer to a board information structure. - * r4 - Optional pointer to the physical starting address of the init RAM - * disk. - * r5 - Optional pointer to the physical ending address of the init RAM - * disk. - * r6 - Optional pointer to the physical starting address of any kernel - * command-line parameters. - * r7 - Optional pointer to the physical ending address of any kernel - * command-line parameters. - * - * Output(s): - * N/A - * - * Returns: - * N/A - * - */ -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - parse_bootinfo(find_bootinfo()); - - /* - * If we were passed in a board information, copy it into the - * residual data area. - */ - if (r3) { - memcpy((void *)__res, (void *)(r3 + KERNELBASE), sizeof(bd_t)); - } - -#if defined(CONFIG_BLK_DEV_INITRD) - /* - * If the init RAM disk has been configured in, and there's a valid - * starting address for it, set it up. - */ - if (r4) { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - /* Copy the kernel command line arguments to a safe place. */ - - if (r6) { - *(char *)(r7 + KERNELBASE) = 0; - strcpy(cmd_line, (char *)(r6 + KERNELBASE)); - } - - /* Initialize machine-dependency vectors */ - - ppc_md.setup_arch = oak_setup_arch; - ppc_md.show_percpuinfo = oak_show_percpuinfo; - ppc_md.irq_canonicalize = NULL; - ppc_md.init_IRQ = ppc4xx_pic_init; - ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */ - ppc_md.init = NULL; - - ppc_md.restart = oak_restart; - ppc_md.power_off = oak_power_off; - ppc_md.halt = oak_halt; - - ppc_md.time_init = oak_time_init; - ppc_md.set_rtc_time = oak_set_rtc_time; - ppc_md.get_rtc_time = oak_get_rtc_time; - ppc_md.calibrate_decr = oak_calibrate_decr; -} - -/* - * Document me. - */ -void __init -oak_setup_arch(void) -{ - /* XXX - Implement me */ -} - -/* - * int oak_show_percpuinfo() - * - * Description: - * This routine pretty-prints the platform's internal CPU and bus clock - * frequencies into the buffer for usage in /proc/cpuinfo. - * - * Input(s): - * *buffer - Buffer into which CPU and bus clock frequencies are to be - * printed. - * - * Output(s): - * *buffer - Buffer with the CPU and bus clock frequencies. - * - * Returns: - * The number of bytes copied into 'buffer' if OK, otherwise zero or less - * on error. - */ -int -oak_show_percpuinfo(struct seq_file *m, int i) -{ - bd_t *bp = (bd_t *)__res; - - seq_printf(m, "clock\t\t: %dMHz\n" - "bus clock\t\t: %dMHz\n", - bp->bi_intfreq / 1000000, - bp->bi_busfreq / 1000000); - - return 0; -} - -/* - * Document me. - */ -void -oak_restart(char *cmd) -{ - abort(); -} - -/* - * Document me. - */ -void -oak_power_off(void) -{ - oak_restart(NULL); -} - -/* - * Document me. - */ -void -oak_halt(void) -{ - oak_restart(NULL); -} - -/* - * Document me. - */ -long __init -oak_time_init(void) -{ - /* XXX - Implement me */ - return 0; -} - -/* - * Document me. - */ -int __init -oak_set_rtc_time(unsigned long time) -{ - /* XXX - Implement me */ - - return (0); -} - -/* - * Document me. - */ -unsigned long __init -oak_get_rtc_time(void) -{ - /* XXX - Implement me */ - - return (0); -} - -/* - * void __init oak_calibrate_decr() - * - * Description: - * This routine retrieves the internal processor frequency from the board - * information structure, sets up the kernel timer decrementer based on - * that value, enables the 403 programmable interval timer (PIT) and sets - * it up for auto-reload. - * - * Input(s): - * N/A - * - * Output(s): - * N/A - * - * Returns: - * N/A - * - */ -void __init -oak_calibrate_decr(void) -{ - unsigned int freq; - bd_t *bip = (bd_t *)__res; - - freq = bip->bi_intfreq; - - decrementer_count = freq / HZ; - count_period_num = 1; - count_period_den = freq; - - /* Enable the PIT and set auto-reload of its value */ - - mtspr(SPRN_TCR, TCR_PIE | TCR_ARE); - - /* Clear any pending timer interrupts */ - - mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_PIS | TSR_FIS); -} diff --git a/arch/ppc/platforms/4xx/oak.h b/arch/ppc/platforms/4xx/oak.h deleted file mode 100644 index 1b86a4c66b04..000000000000 --- a/arch/ppc/platforms/4xx/oak.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * - * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> - * - * Module name: oak.h - * - * Description: - * Macros, definitions, and data structures specific to the IBM PowerPC - * 403G{A,B,C,CX} "Oak" evaluation board. Anything specific to the pro- - * cessor itself is defined elsewhere. - * - */ - -#ifdef __KERNEL__ -#ifndef __ASM_OAK_H__ -#define __ASM_OAK_H__ - -/* We have an IBM 403G{A,B,C,CX} core */ -#include <asm/ibm403.h> - -#define _IO_BASE 0 -#define _ISA_MEM_BASE 0 -#define PCI_DRAM_OFFSET 0 - -/* Memory map for the "Oak" evaluation board */ - -#define PPC403SPU_IO_BASE 0x40000000 /* 403 On-chip serial port */ -#define PPC403SPU_IO_SIZE 0x00000008 -#define OAKSERIAL_IO_BASE 0x7E000000 /* NS16550DV serial port */ -#define OAKSERIAL_IO_SIZE 0x00000008 -#define OAKNET_IO_BASE 0xF4000000 /* NS83902AV Ethernet */ -#define OAKNET_IO_SIZE 0x00000040 -#define OAKPROM_IO_BASE 0xFFFE0000 /* AMD 29F010 Flash ROM */ -#define OAKPROM_IO_SIZE 0x00020000 - - -/* Interrupt assignments fixed by the hardware implementation */ - -/* This is annoying kbuild-2.4 problem. -- Tom */ - -#define PPC403SPU_RX_INT 4 /* AIC_INT4 */ -#define PPC403SPU_TX_INT 5 /* AIC_INT5 */ -#define OAKNET_INT 27 /* AIC_INT27 */ -#define OAKSERIAL_INT 28 /* AIC_INT28 */ - -#ifndef __ASSEMBLY__ -/* - * Data structure defining board information maintained by the boot - * ROM on IBM's "Oak" evaluation board. An effort has been made to - * keep the field names consistent with the 8xx 'bd_t' board info - * structures. - */ - -typedef struct board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[6]; /* Ethernet MAC address */ - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* Bus speed, in Hz */ -} bd_t; - -#ifdef __cplusplus -extern "C" { -#endif - -extern void oak_init(unsigned long r3, - unsigned long ird_start, - unsigned long ird_end, - unsigned long cline_start, - unsigned long cline_end); -extern void oak_setup_arch(void); -extern int oak_setup_residual(char *buffer); -extern void oak_init_IRQ(void); -extern int oak_get_irq(struct pt_regs *regs); -extern void oak_restart(char *cmd); -extern void oak_power_off(void); -extern void oak_halt(void); -extern void oak_time_init(void); -extern int oak_set_rtc_time(unsigned long now); -extern unsigned long oak_get_rtc_time(void); -extern void oak_calibrate_decr(void); - -#ifdef __cplusplus -} -#endif - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - -#define PPC4xx_MACHINE_NAME "IBM Oak" - -#endif /* !__ASSEMBLY__ */ -#endif /* __ASM_OAK_H__ */ -#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/oak_setup.h b/arch/ppc/platforms/4xx/oak_setup.h deleted file mode 100644 index 8648bd084df8..000000000000 --- a/arch/ppc/platforms/4xx/oak_setup.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * - * Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu> - * - * Module name: oak_setup.h - * - * Description: - * Architecture- / platform-specific boot-time initialization code for - * the IBM PowerPC 403GCX "Oak" evaluation board. Adapted from original - * code by Gary Thomas, Cort Dougan <cort@cs.nmt.edu>, and Dan Malek - * <dan@netx4.com>. - * - */ - -#ifndef __OAK_SETUP_H__ -#define __OAK_SETUP_H__ - -#include <asm/ptrace.h> -#include <asm/board.h> - - -#ifdef __cplusplus -extern "C" { -#endif - -extern unsigned char __res[sizeof(bd_t)]; - -extern void oak_init(unsigned long r3, - unsigned long ird_start, - unsigned long ird_end, - unsigned long cline_start, - unsigned long cline_end); -extern void oak_setup_arch(void); -extern int oak_setup_residual(char *buffer); -extern void oak_init_IRQ(void); -extern int oak_get_irq(struct pt_regs *regs); -extern void oak_restart(char *cmd); -extern void oak_power_off(void); -extern void oak_halt(void); -extern void oak_time_init(void); -extern int oak_set_rtc_time(unsigned long now); -extern unsigned long oak_get_rtc_time(void); -extern void oak_calibrate_decr(void); - - -#ifdef __cplusplus -} -#endif - -#endif /* __OAK_SETUP_H__ */ diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c index 8fc34a344769..80028df1b445 100644 --- a/arch/ppc/platforms/4xx/ocotea.c +++ b/arch/ppc/platforms/4xx/ocotea.c @@ -53,13 +53,6 @@ #include <syslib/gen550.h> #include <syslib/ibm440gx_common.h> -/* - * This is a horrible kludge, we eventually need to abstract this - * generic PHY stuff, so the standard phy mode defines can be - * easily used from arch code. - */ -#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h" - bd_t __res; static struct ibm44x_clocks clocks __initdata; diff --git a/arch/ppc/platforms/4xx/redwood5.c b/arch/ppc/platforms/4xx/redwood5.c index 2f5e410afbc5..bee8b4ac8afd 100644 --- a/arch/ppc/platforms/4xx/redwood5.c +++ b/arch/ppc/platforms/4xx/redwood5.c @@ -18,6 +18,19 @@ #include <linux/ioport.h> #include <asm/io.h> #include <asm/machdep.h> +#include <asm/ppc4xx_pic.h> + +/* + * Define external IRQ senses and polarities. + */ +unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = { + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 0 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 3 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 4 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext Int 5 */ +}; static struct resource smc91x_resources[] = { [0] = { diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index ddd04d4c1ea9..b38a851a64ec 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -62,9 +62,29 @@ extern unsigned long total_memory; /* in mm/init */ unsigned char __res[sizeof (bd_t)]; #ifdef CONFIG_PCI -#error "PCI is not supported" -/* NEED mpc83xx_map_irq & mpc83xx_exclude_device - see platforms/85xx/mpc85xx_ads_common.c */ +int +mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x11 */ + {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x12 */ + {PIRQD, PIRQA, PIRQB, PIRQC} /* idsel 0x13 */ + }; + + const long min_idsel = 0x11, max_idsel = 0x13, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +int +mpc83xx_exclude_device(u_char bus, u_char devfn) +{ + return PCIBIOS_SUCCESSFUL; +} #endif /* CONFIG_PCI */ /* ************************************************************************ @@ -88,7 +108,7 @@ mpc834x_sys_setup_arch(void) #ifdef CONFIG_PCI /* setup PCI host bridges */ - mpc83xx_sys_setup_hose(); + mpc83xx_setup_hose(); #endif mpc83xx_early_serial_map(); @@ -175,10 +195,17 @@ mpc834x_sys_init_IRQ(void) IRQ_SENSE_LEVEL, /* EXT 1 */ IRQ_SENSE_LEVEL, /* EXT 2 */ 0, /* EXT 3 */ +#ifdef CONFIG_PCI + IRQ_SENSE_LEVEL, /* EXT 4 */ + IRQ_SENSE_LEVEL, /* EXT 5 */ + IRQ_SENSE_LEVEL, /* EXT 6 */ + IRQ_SENSE_LEVEL, /* EXT 7 */ +#else 0, /* EXT 4 */ 0, /* EXT 5 */ 0, /* EXT 6 */ 0, /* EXT 7 */ +#endif }; ipic_init(binfo->bi_immr_base + 0x00700, 0, MPC83xx_IPIC_IRQ_OFFSET, senses, 8); diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h index a2f6e49d7151..1584cd77a9ef 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.h +++ b/arch/ppc/platforms/83xx/mpc834x_sys.h @@ -26,7 +26,7 @@ #define VIRT_IMMRBAR ((uint)0xfe000000) #define BCSR_PHYS_ADDR ((uint)0xf8000000) -#define BCSR_SIZE ((uint)(32 * 1024)) +#define BCSR_SIZE ((uint)(128 * 1024)) #define BCSR_MISC_REG2_OFF 0x07 #define BCSR_MISC_REG2_PORESET 0x01 @@ -34,23 +34,25 @@ #define BCSR_MISC_REG3_OFF 0x08 #define BCSR_MISC_REG3_CNFLOCK 0x80 -#ifdef CONFIG_PCI -/* PCI interrupt controller */ -#define PIRQA MPC83xx_IRQ_IRQ4 -#define PIRQB MPC83xx_IRQ_IRQ5 -#define PIRQC MPC83xx_IRQ_IRQ6 -#define PIRQD MPC83xx_IRQ_IRQ7 - -#define MPC834x_SYS_PCI1_LOWER_IO 0x00000000 -#define MPC834x_SYS_PCI1_UPPER_IO 0x00ffffff - -#define MPC834x_SYS_PCI1_LOWER_MEM 0x80000000 -#define MPC834x_SYS_PCI1_UPPER_MEM 0x9fffffff - -#define MPC834x_SYS_PCI1_IO_BASE 0xe2000000 -#define MPC834x_SYS_PCI1_MEM_OFFSET 0x00000000 - -#define MPC834x_SYS_PCI1_IO_SIZE 0x01000000 -#endif /* CONFIG_PCI */ +#define PIRQA MPC83xx_IRQ_EXT4 +#define PIRQB MPC83xx_IRQ_EXT5 +#define PIRQC MPC83xx_IRQ_EXT6 +#define PIRQD MPC83xx_IRQ_EXT7 + +#define MPC83xx_PCI1_LOWER_IO 0x00000000 +#define MPC83xx_PCI1_UPPER_IO 0x00ffffff +#define MPC83xx_PCI1_LOWER_MEM 0x80000000 +#define MPC83xx_PCI1_UPPER_MEM 0x9fffffff +#define MPC83xx_PCI1_IO_BASE 0xe2000000 +#define MPC83xx_PCI1_MEM_OFFSET 0x00000000 +#define MPC83xx_PCI1_IO_SIZE 0x01000000 + +#define MPC83xx_PCI2_LOWER_IO 0x00000000 +#define MPC83xx_PCI2_UPPER_IO 0x00ffffff +#define MPC83xx_PCI2_LOWER_MEM 0xa0000000 +#define MPC83xx_PCI2_UPPER_MEM 0xbfffffff +#define MPC83xx_PCI2_IO_BASE 0xe3000000 +#define MPC83xx_PCI2_MEM_OFFSET 0x00000000 +#define MPC83xx_PCI2_IO_SIZE 0x01000000 #endif /* __MACH_MPC83XX_SYS_H__ */ diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile index 5488a053f415..ff7452e5d8e5 100644 --- a/arch/ppc/platforms/Makefile +++ b/arch/ppc/platforms/Makefile @@ -21,22 +21,17 @@ obj-$(CONFIG_CPU_FREQ_PMAC) += pmac_cpufreq.o endif obj-$(CONFIG_PMAC_BACKLIGHT) += pmac_backlight.o obj-$(CONFIG_PREP_RESIDUAL) += residual.o -obj-$(CONFIG_ADIR) += adir_setup.o adir_pic.o adir_pci.o obj-$(CONFIG_PQ2ADS) += pq2ads.o obj-$(CONFIG_TQM8260) += tqm8260_setup.o obj-$(CONFIG_CPCI690) += cpci690.o obj-$(CONFIG_EV64260) += ev64260.o obj-$(CONFIG_CHESTNUT) += chestnut.o obj-$(CONFIG_GEMINI) += gemini_pci.o gemini_setup.o gemini_prom.o -obj-$(CONFIG_K2) += k2.o obj-$(CONFIG_LOPEC) += lopec.o obj-$(CONFIG_KATANA) += katana.o obj-$(CONFIG_HDPU) += hdpu.o -obj-$(CONFIG_MCPN765) += mcpn765.o -obj-$(CONFIG_MENF1) += menf1_setup.o menf1_pci.o obj-$(CONFIG_MVME5100) += mvme5100.o obj-$(CONFIG_PAL4) += pal4_setup.o pal4_pci.o -obj-$(CONFIG_PCORE) += pcore.o obj-$(CONFIG_POWERPMC250) += powerpmc250.o obj-$(CONFIG_PPLUS) += pplus.o obj-$(CONFIG_PRPMC750) += prpmc750.o @@ -46,6 +41,7 @@ obj-$(CONFIG_SANDPOINT) += sandpoint.o obj-$(CONFIG_SBC82xx) += sbc82xx.o obj-$(CONFIG_SPRUCE) += spruce.o obj-$(CONFIG_LITE5200) += lite5200.o +obj-$(CONFIG_EV64360) += ev64360.o ifeq ($(CONFIG_SMP),y) obj-$(CONFIG_PPC_PMAC) += pmac_smp.o diff --git a/arch/ppc/platforms/adir.h b/arch/ppc/platforms/adir.h deleted file mode 100644 index 13a748b46956..000000000000 --- a/arch/ppc/platforms/adir.h +++ /dev/null @@ -1,95 +0,0 @@ -/* - * arch/ppc/platforms/adir.h - * - * Definitions for SBS Adirondack board support - * - * By Michael Sokolov <msokolov@ivan.Harhan.ORG> - */ - -#ifndef __PPC_PLATFORMS_ADIR_H -#define __PPC_PLATFORMS_ADIR_H - -/* - * SBS Adirondack definitions - */ - -/* PPC physical address space layout. We use the one set up by the firmware. */ -#define ADIR_PCI32_MEM_BASE 0x80000000 -#define ADIR_PCI32_MEM_SIZE 0x20000000 -#define ADIR_PCI64_MEM_BASE 0xA0000000 -#define ADIR_PCI64_MEM_SIZE 0x20000000 -#define ADIR_PCI32_IO_BASE 0xC0000000 -#define ADIR_PCI32_IO_SIZE 0x10000000 -#define ADIR_PCI64_IO_BASE 0xD0000000 -#define ADIR_PCI64_IO_SIZE 0x10000000 -#define ADIR_PCI64_PHB 0xFF400000 -#define ADIR_PCI32_PHB 0xFF500000 - -#define ADIR_PCI64_CONFIG_ADDR (ADIR_PCI64_PHB + 0x000f8000) -#define ADIR_PCI64_CONFIG_DATA (ADIR_PCI64_PHB + 0x000f8010) - -#define ADIR_PCI32_CONFIG_ADDR (ADIR_PCI32_PHB + 0x000f8000) -#define ADIR_PCI32_CONFIG_DATA (ADIR_PCI32_PHB + 0x000f8010) - -/* System memory as seen from PCI */ -#define ADIR_PCI_SYS_MEM_BASE 0x80000000 - -/* Static virtual mapping of PCI I/O */ -#define ADIR_PCI32_VIRT_IO_BASE 0xFE000000 -#define ADIR_PCI32_VIRT_IO_SIZE 0x01000000 -#define ADIR_PCI64_VIRT_IO_BASE 0xFF000000 -#define ADIR_PCI64_VIRT_IO_SIZE 0x01000000 - -/* Registers */ -#define ADIR_NVRAM_RTC_ADDR 0x74 -#define ADIR_NVRAM_RTC_DATA 0x75 - -#define ADIR_BOARD_ID_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF0) -#define ADIR_CPLD1REV_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF1) -#define ADIR_CPLD2REV_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF2) -#define ADIR_FLASHCTL_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF3) -#define ADIR_CPC710_STAT_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF4) -#define ADIR_CLOCK_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF5) -#define ADIR_GPIO_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF8) -#define ADIR_MISC_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF9) -#define ADIR_LED_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFFA) - -#define ADIR_CLOCK_REG_PD 0x10 -#define ADIR_CLOCK_REG_SPREAD 0x08 -#define ADIR_CLOCK_REG_SEL133 0x04 -#define ADIR_CLOCK_REG_SEL1 0x02 -#define ADIR_CLOCK_REG_SEL0 0x01 - -#define ADIR_PROCA_INT_MASK (ADIR_PCI32_VIRT_IO_BASE + 0x0EFFF0) -#define ADIR_PROCB_INT_MASK (ADIR_PCI32_VIRT_IO_BASE + 0x0EFFF2) -#define ADIR_PROCA_INT_STAT (ADIR_PCI32_VIRT_IO_BASE + 0x0EFFF4) -#define ADIR_PROCB_INT_STAT (ADIR_PCI32_VIRT_IO_BASE + 0x0EFFF6) - -/* Linux IRQ numbers */ -#define ADIR_IRQ_NONE -1 -#define ADIR_IRQ_SERIAL2 3 -#define ADIR_IRQ_SERIAL1 4 -#define ADIR_IRQ_FDC 6 -#define ADIR_IRQ_PARALLEL 7 -#define ADIR_IRQ_VIA_AUDIO 10 -#define ADIR_IRQ_VIA_USB 11 -#define ADIR_IRQ_IDE0 14 -#define ADIR_IRQ_IDE1 15 -#define ADIR_IRQ_PCI0_INTA 16 -#define ADIR_IRQ_PCI0_INTB 17 -#define ADIR_IRQ_PCI0_INTC 18 -#define ADIR_IRQ_PCI0_INTD 19 -#define ADIR_IRQ_PCI1_INTA 20 -#define ADIR_IRQ_PCI1_INTB 21 -#define ADIR_IRQ_PCI1_INTC 22 -#define ADIR_IRQ_PCI1_INTD 23 -#define ADIR_IRQ_MBSCSI 24 /* motherboard SCSI */ -#define ADIR_IRQ_MBETH1 25 /* motherboard Ethernet 1 */ -#define ADIR_IRQ_MBETH0 26 /* motherboard Ethernet 0 */ -#define ADIR_IRQ_CPC710_INT1 27 -#define ADIR_IRQ_CPC710_INT2 28 -#define ADIR_IRQ_VT82C686_NMI 29 -#define ADIR_IRQ_VT82C686_INTR 30 -#define ADIR_IRQ_INTERPROC 31 - -#endif /* __PPC_PLATFORMS_ADIR_H */ diff --git a/arch/ppc/platforms/adir_pci.c b/arch/ppc/platforms/adir_pci.c deleted file mode 100644 index f94ac53e0711..000000000000 --- a/arch/ppc/platforms/adir_pci.c +++ /dev/null @@ -1,247 +0,0 @@ -/* - * arch/ppc/platforms/adir_pci.c - * - * PCI support for SBS Adirondack - * - * By Michael Sokolov <msokolov@ivan.Harhan.ORG> - * based on the K2 version by Matt Porter <mporter@mvista.com> - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/slab.h> - -#include <asm/byteorder.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> - -#include <syslib/cpc710.h> -#include "adir.h" - -#undef DEBUG -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif /* DEBUG */ - -static inline int __init -adir_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ -#define PCIIRQ(a,b,c,d) {ADIR_IRQ_##a,ADIR_IRQ_##b,ADIR_IRQ_##c,ADIR_IRQ_##d}, - struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); - /* - * The three PCI devices on the motherboard have dedicated lines to the - * CPLD interrupt controller, bypassing the standard PCI INTA-D and the - * PC interrupt controller. All other PCI devices (slots) have usual - * staggered INTA-D lines, resulting in 8 lines total (PCI0 INTA-D and - * PCI1 INTA-D). All 8 go to the CPLD interrupt controller. PCI0 INTA-D - * also go to the south bridge, so we have the option of taking them - * via the CPLD interrupt controller or via the south bridge 8259 - * 8258 thingy. PCI1 INTA-D can only be taken via the CPLD interrupt - * controller. We take all PCI interrupts via the CPLD interrupt - * controller as recommended by SBS. - * - * We also have some monkey business with the PCI devices within the - * VT82C686B south bridge itself. This chip actually has 7 functions on - * its IDSEL. Function 0 is the actual south bridge, function 1 is IDE, - * and function 4 is some special stuff. The other 4 functions are just - * regular PCI devices bundled in the chip. 2 and 3 are USB UHCIs and 5 - * and 6 are audio (not supported on the Adirondack). - * - * This is where the monkey business begins. PCI devices are supposed - * to signal normal PCI interrupts. But the 4 functions in question are - * located in the south bridge chip, which is designed with the - * assumption that it will be fielding PCI INTA-D interrupts rather - * than generating them. Here's what it does. Each of the functions in - * question routes its interrupt to one of the IRQs on the 8259 thingy. - * Which one? It looks at the Interrupt Line register in the PCI config - * space, even though the PCI spec says it's for BIOS/OS interaction - * only. - * - * How do we deal with this? We take these interrupts via 8259 IRQs as - * we have to. We return the desired IRQ numbers from this routine when - * called for the functions in question. The PCI scan code will then - * stick our return value into the Interrupt Line register in the PCI - * config space, and the interrupt will actually go there. We identify - * these functions within the south bridge IDSEL by their interrupt pin - * numbers, as the VT82C686B has 04 in the Interrupt Pin register for - * USB and 03 for audio. - */ - if (!hose->index) { - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - /* south bridge */ PCIIRQ(IDE0, NONE, VIA_AUDIO, VIA_USB) - /* Ethernet 0 */ PCIIRQ(MBETH0, MBETH0, MBETH0, MBETH0) - /* PCI0 slot 1 */ PCIIRQ(PCI0_INTB, PCI0_INTC, PCI0_INTD, PCI0_INTA) - /* PCI0 slot 2 */ PCIIRQ(PCI0_INTC, PCI0_INTD, PCI0_INTA, PCI0_INTB) - /* PCI0 slot 3 */ PCIIRQ(PCI0_INTD, PCI0_INTA, PCI0_INTB, PCI0_INTC) - }; - const long min_idsel = 3, max_idsel = 7, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; - } else { - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - /* Ethernet 1 */ PCIIRQ(MBETH1, MBETH1, MBETH1, MBETH1) - /* SCSI */ PCIIRQ(MBSCSI, MBSCSI, MBSCSI, MBSCSI) - /* PCI1 slot 1 */ PCIIRQ(PCI1_INTB, PCI1_INTC, PCI1_INTD, PCI1_INTA) - /* PCI1 slot 2 */ PCIIRQ(PCI1_INTC, PCI1_INTD, PCI1_INTA, PCI1_INTB) - /* PCI1 slot 3 */ PCIIRQ(PCI1_INTD, PCI1_INTA, PCI1_INTB, PCI1_INTC) - }; - const long min_idsel = 3, max_idsel = 7, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; - } -#undef PCIIRQ -} - -static void -adir_pcibios_fixup_resources(struct pci_dev *dev) -{ - int i; - - if ((dev->vendor == PCI_VENDOR_ID_IBM) && - (dev->device == PCI_DEVICE_ID_IBM_CPC710_PCI64)) - { - DBG("Fixup CPC710 resources\n"); - for (i=0; i<DEVICE_COUNT_RESOURCE; i++) - { - dev->resource[i].start = 0; - dev->resource[i].end = 0; - } - } -} - -/* - * CPC710 DD3 has an errata causing it to hang the system if a type 0 config - * cycle is attempted on its PCI32 interface with a device number > 21. - * CPC710's PCI bridges map device numbers 1 through 21 to AD11 through AD31. - * Per the PCI spec it MUST accept all other device numbers and do nothing, and - * software MUST scan all device numbers without assuming how IDSELs are - * mapped. However, as the CPC710 DD3's errata causes such correct scanning - * procedure to hang the system, we have no choice but to introduce this hack - * of knowingly avoiding device numbers > 21 on PCI0, - */ -static int -adir_exclude_device(u_char bus, u_char devfn) -{ - if ((bus == 0) && (PCI_SLOT(devfn) > 21)) - return PCIBIOS_DEVICE_NOT_FOUND; - else - return PCIBIOS_SUCCESSFUL; -} - -void adir_find_bridges(void) -{ - struct pci_controller *hose_a, *hose_b; - - /* Setup PCI32 hose */ - hose_a = pcibios_alloc_controller(); - if (!hose_a) - return; - - hose_a->first_busno = 0; - hose_a->last_busno = 0xff; - hose_a->pci_mem_offset = ADIR_PCI32_MEM_BASE; - hose_a->io_space.start = 0; - hose_a->io_space.end = ADIR_PCI32_VIRT_IO_SIZE - 1; - hose_a->mem_space.start = 0; - hose_a->mem_space.end = ADIR_PCI32_MEM_SIZE - 1; - hose_a->io_resource.start = 0; - hose_a->io_resource.end = ADIR_PCI32_VIRT_IO_SIZE - 1; - hose_a->io_resource.flags = IORESOURCE_IO; - hose_a->mem_resources[0].start = ADIR_PCI32_MEM_BASE; - hose_a->mem_resources[0].end = ADIR_PCI32_MEM_BASE + - ADIR_PCI32_MEM_SIZE - 1; - hose_a->mem_resources[0].flags = IORESOURCE_MEM; - hose_a->io_base_phys = ADIR_PCI32_IO_BASE; - hose_a->io_base_virt = (void *) ADIR_PCI32_VIRT_IO_BASE; - - ppc_md.pci_exclude_device = adir_exclude_device; - setup_indirect_pci(hose_a, ADIR_PCI32_CONFIG_ADDR, - ADIR_PCI32_CONFIG_DATA); - - /* Initialize PCI32 bus registers */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(0, 0), - CPC710_BUS_NUMBER, - hose_a->first_busno); - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, - hose_a->last_busno); - - hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno); - - /* Write out correct max subordinate bus number for hose A */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, - hose_a->last_busno); - - /* Setup PCI64 hose */ - hose_b = pcibios_alloc_controller(); - if (!hose_b) - return; - - hose_b->first_busno = hose_a->last_busno + 1; - hose_b->last_busno = 0xff; - hose_b->pci_mem_offset = ADIR_PCI64_MEM_BASE; - hose_b->io_space.start = 0; - hose_b->io_space.end = ADIR_PCI64_VIRT_IO_SIZE - 1; - hose_b->mem_space.start = 0; - hose_b->mem_space.end = ADIR_PCI64_MEM_SIZE - 1; - hose_b->io_resource.start = 0; - hose_b->io_resource.end = ADIR_PCI64_VIRT_IO_SIZE - 1; - hose_b->io_resource.flags = IORESOURCE_IO; - hose_b->mem_resources[0].start = ADIR_PCI64_MEM_BASE; - hose_b->mem_resources[0].end = ADIR_PCI64_MEM_BASE + - ADIR_PCI64_MEM_SIZE - 1; - hose_b->mem_resources[0].flags = IORESOURCE_MEM; - hose_b->io_base_phys = ADIR_PCI64_IO_BASE; - hose_b->io_base_virt = (void *) ADIR_PCI64_VIRT_IO_BASE; - - setup_indirect_pci(hose_b, ADIR_PCI64_CONFIG_ADDR, - ADIR_PCI64_CONFIG_DATA); - - /* Initialize PCI64 bus registers */ - early_write_config_byte(hose_b, - 0, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, - 0xff); - - early_write_config_byte(hose_b, - 0, - PCI_DEVFN(0, 0), - CPC710_BUS_NUMBER, - hose_b->first_busno); - - hose_b->last_busno = pciauto_bus_scan(hose_b, - hose_b->first_busno); - - /* Write out correct max subordinate bus number for hose B */ - early_write_config_byte(hose_b, - hose_b->first_busno, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, - hose_b->last_busno); - - ppc_md.pcibios_fixup = NULL; - ppc_md.pcibios_fixup_resources = adir_pcibios_fixup_resources; - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = adir_map_irq; -} diff --git a/arch/ppc/platforms/adir_pic.c b/arch/ppc/platforms/adir_pic.c deleted file mode 100644 index 9947cba52af5..000000000000 --- a/arch/ppc/platforms/adir_pic.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * arch/ppc/platforms/adir_pic.c - * - * Interrupt controller support for SBS Adirondack - * - * By Michael Sokolov <msokolov@ivan.Harhan.ORG> - * based on the K2 and SCM versions by Matt Porter <mporter@mvista.com> - */ - -#include <linux/stddef.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/pci.h> -#include <linux/interrupt.h> - -#include <asm/io.h> -#include <asm/i8259.h> -#include "adir.h" - -static void adir_onboard_pic_enable(unsigned int irq); -static void adir_onboard_pic_disable(unsigned int irq); - -__init static void -adir_onboard_pic_init(void) -{ - volatile u_short *maskreg = (volatile u_short *) ADIR_PROCA_INT_MASK; - - /* Disable all Adirondack onboard interrupts */ - out_be16(maskreg, 0xFFFF); -} - -static int -adir_onboard_pic_get_irq(void) -{ - volatile u_short *statreg = (volatile u_short *) ADIR_PROCA_INT_STAT; - int irq; - u_short int_status, int_test; - - int_status = in_be16(statreg); - for (irq = 0, int_test = 1; irq < 16; irq++, int_test <<= 1) { - if (int_status & int_test) - break; - } - - if (irq == 16) - return -1; - - return (irq+16); -} - -static void -adir_onboard_pic_enable(unsigned int irq) -{ - volatile u_short *maskreg = (volatile u_short *) ADIR_PROCA_INT_MASK; - - /* Change irq to Adirondack onboard native value */ - irq -= 16; - - /* Enable requested irq number */ - out_be16(maskreg, in_be16(maskreg) & ~(1 << irq)); -} - -static void -adir_onboard_pic_disable(unsigned int irq) -{ - volatile u_short *maskreg = (volatile u_short *) ADIR_PROCA_INT_MASK; - - /* Change irq to Adirondack onboard native value */ - irq -= 16; - - /* Disable requested irq number */ - out_be16(maskreg, in_be16(maskreg) | (1 << irq)); -} - -static struct hw_interrupt_type adir_onboard_pic = { - " ADIR PIC ", - NULL, - NULL, - adir_onboard_pic_enable, /* unmask */ - adir_onboard_pic_disable, /* mask */ - adir_onboard_pic_disable, /* mask and ack */ - NULL, - NULL -}; - -static struct irqaction noop_action = { - .handler = no_action, - .flags = SA_INTERRUPT, - .mask = CPU_MASK_NONE, - .name = "82c59 primary cascade", -}; - -/* - * Linux interrupt values are assigned as follows: - * - * 0-15 VT82C686 8259 interrupts - * 16-31 Adirondack CPLD interrupts - */ -__init void -adir_init_IRQ(void) -{ - int i; - - /* Initialize the cascaded 8259's on the VT82C686 */ - for (i=0; i<16; i++) - irq_desc[i].handler = &i8259_pic; - i8259_init(NULL); - - /* Initialize Adirondack CPLD PIC and enable 8259 interrupt cascade */ - for (i=16; i<32; i++) - irq_desc[i].handler = &adir_onboard_pic; - adir_onboard_pic_init(); - - /* Enable 8259 interrupt cascade */ - setup_irq(ADIR_IRQ_VT82C686_INTR, &noop_action); -} - -int -adir_get_irq(struct pt_regs *regs) -{ - int irq; - - if ((irq = adir_onboard_pic_get_irq()) < 0) - return irq; - - if (irq == ADIR_IRQ_VT82C686_INTR) - irq = i8259_irq(regs); - - return irq; -} diff --git a/arch/ppc/platforms/adir_setup.c b/arch/ppc/platforms/adir_setup.c deleted file mode 100644 index 6a6754ee0617..000000000000 --- a/arch/ppc/platforms/adir_setup.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * arch/ppc/platforms/adir_setup.c - * - * Board setup routines for SBS Adirondack - * - * By Michael Sokolov <msokolov@ivan.Harhan.ORG> - * based on the K2 version by Matt Porter <mporter@mvista.com> - */ - -#include <linux/config.h> -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/types.h> -#include <linux/major.h> -#include <linux/initrd.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/ide.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/dma.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/time.h> -#include <asm/todc.h> -#include <asm/bootinfo.h> - -#include "adir.h" - -extern void adir_init_IRQ(void); -extern int adir_get_irq(struct pt_regs *); -extern void adir_find_bridges(void); -extern unsigned long loops_per_jiffy; - -static unsigned int cpu_750cx[16] = { - 5, 15, 14, 0, 4, 13, 0, 9, 6, 11, 8, 10, 16, 12, 7, 0 -}; - -static int -adir_get_bus_speed(void) -{ - if (!(*((u_char *) ADIR_CLOCK_REG) & ADIR_CLOCK_REG_SEL133)) - return 100000000; - else - return 133333333; -} - -static int -adir_get_cpu_speed(void) -{ - unsigned long hid1; - int cpu_speed; - - hid1 = mfspr(SPRN_HID1) >> 28; - - hid1 = cpu_750cx[hid1]; - - cpu_speed = adir_get_bus_speed()*hid1/2; - return cpu_speed; -} - -static void __init -adir_calibrate_decr(void) -{ - int freq, divisor = 4; - - /* determine processor bus speed */ - freq = adir_get_bus_speed(); - tb_ticks_per_jiffy = freq / HZ / divisor; - tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000); -} - -static int -adir_show_cpuinfo(struct seq_file *m) -{ - seq_printf(m, "vendor\t\t: SBS\n"); - seq_printf(m, "machine\t\t: Adirondack\n"); - seq_printf(m, "cpu speed\t: %dMhz\n", adir_get_cpu_speed()/1000000); - seq_printf(m, "bus speed\t: %dMhz\n", adir_get_bus_speed()/1000000); - seq_printf(m, "memory type\t: SDRAM\n"); - - return 0; -} - -extern char cmd_line[]; - -TODC_ALLOC(); - -static void __init -adir_setup_arch(void) -{ - unsigned int cpu; - - /* Setup TODC access */ - TODC_INIT(TODC_TYPE_MC146818, ADIR_NVRAM_RTC_ADDR, 0, - ADIR_NVRAM_RTC_DATA, 8); - - /* init to some ~sane value until calibrate_delay() runs */ - loops_per_jiffy = 50000000/HZ; - - /* Setup PCI host bridges */ - adir_find_bridges(); - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_SDA1; -#endif - - /* Identify the system */ - printk("System Identification: SBS Adirondack - PowerPC 750CXe @ %d Mhz\n", adir_get_cpu_speed()/1000000); - printk("SBS Adirondack port (C) 2001 SBS Technologies, Inc.\n"); - - /* Identify the CPU manufacturer */ - cpu = mfspr(SPRN_PVR); - printk("CPU manufacturer: IBM [rev=%04x]\n", (cpu & 0xffff)); -} - -static void -adir_restart(char *cmd) -{ - local_irq_disable(); - /* SRR0 has system reset vector, SRR1 has default MSR value */ - /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */ - __asm__ __volatile__ - ("lis 3,0xfff0\n\t" - "ori 3,3,0x0100\n\t" - "mtspr 26,3\n\t" - "li 3,0\n\t" - "mtspr 27,3\n\t" - "rfi\n\t"); - for(;;); -} - -static void -adir_power_off(void) -{ - for(;;); -} - -static void -adir_halt(void) -{ - adir_restart(NULL); -} - -static unsigned long __init -adir_find_end_of_memory(void) -{ - return boot_mem_size; -} - -static void __init -adir_map_io(void) -{ - io_block_mapping(ADIR_PCI32_VIRT_IO_BASE, ADIR_PCI32_IO_BASE, - ADIR_PCI32_VIRT_IO_SIZE, _PAGE_IO); - io_block_mapping(ADIR_PCI64_VIRT_IO_BASE, ADIR_PCI64_IO_BASE, - ADIR_PCI64_VIRT_IO_SIZE, _PAGE_IO); -} - -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - /* - * On the Adirondack we use bi_recs and pass the pointer to them in R3. - */ - parse_bootinfo((struct bi_record *) (r3 + KERNELBASE)); - - /* Remember, isa_io_base is virtual but isa_mem_base is physical! */ - isa_io_base = ADIR_PCI32_VIRT_IO_BASE; - isa_mem_base = ADIR_PCI32_MEM_BASE; - pci_dram_offset = ADIR_PCI_SYS_MEM_BASE; - - ppc_md.setup_arch = adir_setup_arch; - ppc_md.show_cpuinfo = adir_show_cpuinfo; - ppc_md.irq_canonicalize = NULL; - ppc_md.init_IRQ = adir_init_IRQ; - ppc_md.get_irq = adir_get_irq; - ppc_md.init = NULL; - - ppc_md.find_end_of_memory = adir_find_end_of_memory; - ppc_md.setup_io_mappings = adir_map_io; - - ppc_md.restart = adir_restart; - ppc_md.power_off = adir_power_off; - ppc_md.halt = adir_halt; - - ppc_md.time_init = todc_time_init; - ppc_md.set_rtc_time = todc_set_rtc_time; - ppc_md.get_rtc_time = todc_get_rtc_time; - ppc_md.nvram_read_val = todc_mc146818_read_val; - ppc_md.nvram_write_val = todc_mc146818_write_val; - ppc_md.calibrate_decr = adir_calibrate_decr; -} diff --git a/arch/ppc/platforms/chrp_time.c b/arch/ppc/platforms/chrp_time.c index 4864a7de3daa..6037ce7796f5 100644 --- a/arch/ppc/platforms/chrp_time.c +++ b/arch/ppc/platforms/chrp_time.c @@ -22,7 +22,6 @@ #include <linux/init.h> #include <linux/bcd.h> -#include <asm/segment.h> #include <asm/io.h> #include <asm/nvram.h> #include <asm/prom.h> diff --git a/arch/ppc/platforms/cpci690.c b/arch/ppc/platforms/cpci690.c index 507870c9a97a..f64ac2acb603 100644 --- a/arch/ppc/platforms/cpci690.c +++ b/arch/ppc/platforms/cpci690.c @@ -35,11 +35,7 @@ #define SET_PCI_IDE_NATIVE static struct mv64x60_handle bh; -static u32 cpci690_br_base; - -static const unsigned int cpu_7xx[16] = { /* 7xx & 74xx (but not 745x) */ - 18, 15, 14, 2, 4, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0 -}; +static void __iomem *cpci690_br_base; TODC_ALLOC(); @@ -55,7 +51,7 @@ cpci690_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) * A B C D */ { - { 90, 91, 88, 89}, /* IDSEL 30/20 - Sentinel */ + { 90, 91, 88, 89 }, /* IDSEL 30/20 - Sentinel */ }; const long min_idsel = 20, max_idsel = 20, irqs_per_slot = 4; @@ -67,9 +63,9 @@ cpci690_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) * A B C D */ { - { 93, 94, 95, 92}, /* IDSEL 28/18 - PMC slot 2 */ - { 0, 0, 0, 0}, /* IDSEL 29/19 - Not used */ - { 94, 95, 92, 93}, /* IDSEL 30/20 - PMC slot 1 */ + { 93, 94, 95, 92 }, /* IDSEL 28/18 - PMC slot 2 */ + { 0, 0, 0, 0 }, /* IDSEL 29/19 - Not used */ + { 94, 95, 92, 93 }, /* IDSEL 30/20 - PMC slot 1 */ }; const long min_idsel = 18, max_idsel = 20, irqs_per_slot = 4; @@ -77,68 +73,29 @@ cpci690_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) } } -static int -cpci690_get_cpu_speed(void) -{ - unsigned long hid1; +#define GB (1024UL * 1024UL * 1024UL) - hid1 = mfspr(SPRN_HID1) >> 28; - return CPCI690_BUS_FREQ * cpu_7xx[hid1]/2; +static u32 +cpci690_get_bus_freq(void) +{ + if (boot_mem_size >= (1*GB)) /* bus speed based on mem size */ + return 100000000; + else + return 133333333; } -#define KB (1024UL) -#define MB (1024UL * KB) -#define GB (1024UL * MB) +static const unsigned int cpu_750xx[32] = { /* 750FX & 750GX */ + 0, 0, 2, 2, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,/* 0-15*/ + 16, 17, 18, 19, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40, 0 /*16-31*/ +}; -unsigned long __init -cpci690_find_end_of_memory(void) +static int +cpci690_get_cpu_freq(void) { - u32 mem_ctlr_size; - static u32 board_size; - static u8 first_time = 1; - - if (first_time) { - /* Using cpci690_set_bat() mapping ==> virt addr == phys addr */ - switch (in_8((u8 *) (cpci690_br_base + - CPCI690_BR_MEM_CTLR)) & 0x07) { - case 0x01: - board_size = 256*MB; - break; - case 0x02: - board_size = 512*MB; - break; - case 0x03: - board_size = 768*MB; - break; - case 0x04: - board_size = 1*GB; - break; - case 0x05: - board_size = 1*GB + 512*MB; - break; - case 0x06: - board_size = 2*GB; - break; - default: - board_size = 0xffffffff; /* use mem ctlr size */ - } /* switch */ - - mem_ctlr_size = mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE, - MV64x60_TYPE_GT64260A); - - /* Check that mem ctlr & board reg agree. If not, pick MIN. */ - if (board_size != mem_ctlr_size) { - printk(KERN_WARNING "Board register & memory controller" - "mem size disagree (board reg: 0x%lx, " - "mem ctlr: 0x%lx)\n", - (ulong)board_size, (ulong)mem_ctlr_size); - board_size = min(board_size, mem_ctlr_size); - } - - first_time = 0; - } /* if */ - - return board_size; + unsigned long pll_cfg; + + pll_cfg = (mfspr(SPRN_HID1) & 0xf8000000) >> 27; + return cpci690_get_bus_freq() * cpu_750xx[pll_cfg]/2; } static void __init @@ -228,7 +185,7 @@ cpci690_setup_peripherals(void) mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, CPCI690_BR_BASE, CPCI690_BR_SIZE, 0); bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN); - cpci690_br_base = (u32)ioremap(CPCI690_BR_BASE, CPCI690_BR_SIZE); + cpci690_br_base = ioremap(CPCI690_BR_BASE, CPCI690_BR_SIZE); mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, CPCI690_TODC_BASE, CPCI690_TODC_SIZE, 0); @@ -329,7 +286,7 @@ cpci690_fixup_mpsc_pdata(struct platform_device *pdev) pdata->max_idle = 40; pdata->default_baud = CPCI690_MPSC_BAUD; pdata->brg_clk_src = CPCI690_MPSC_CLK_SRC; - pdata->brg_clk_freq = CPCI690_BUS_FREQ; + pdata->brg_clk_freq = cpci690_get_bus_freq(); } static int __init @@ -365,7 +322,7 @@ cpci690_reset_board(void) u32 i = 10000; local_irq_disable(); - out_8((u8 *)(cpci690_br_base + CPCI690_BR_SW_RESET), 0x11); + out_8((cpci690_br_base + CPCI690_BR_SW_RESET), 0x11); while (i != 0) i++; panic("restart failed\n"); @@ -394,10 +351,40 @@ cpci690_power_off(void) static int cpci690_show_cpuinfo(struct seq_file *m) { + char *s; + + seq_printf(m, "cpu MHz\t\t: %d\n", + (cpci690_get_cpu_freq() + 500000) / 1000000); + seq_printf(m, "bus MHz\t\t: %d\n", + (cpci690_get_bus_freq() + 500000) / 1000000); seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n"); seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n"); - seq_printf(m, "cpu MHz\t\t: %d\n", cpci690_get_cpu_speed()/1000/1000); - seq_printf(m, "bus MHz\t\t: %d\n", CPCI690_BUS_FREQ/1000/1000); + seq_printf(m, "FPGA Revision\t: %d\n", + in_8(cpci690_br_base + CPCI690_BR_MEM_CTLR) >> 5); + + switch(bh.type) { + case MV64x60_TYPE_GT64260A: + s = "gt64260a"; + break; + case MV64x60_TYPE_GT64260B: + s = "gt64260b"; + break; + case MV64x60_TYPE_MV64360: + s = "mv64360"; + break; + case MV64x60_TYPE_MV64460: + s = "mv64460"; + break; + default: + s = "Unknown"; + } + seq_printf(m, "bridge type\t: %s\n", s); + seq_printf(m, "bridge rev\t: 0x%x\n", bh.rev); +#if defined(CONFIG_NOT_COHERENT_CACHE) + seq_printf(m, "coherency\t: %s\n", "off"); +#else + seq_printf(m, "coherency\t: %s\n", "on"); +#endif return 0; } @@ -407,7 +394,7 @@ cpci690_calibrate_decr(void) { ulong freq; - freq = CPCI690_BUS_FREQ / 4; + freq = cpci690_get_bus_freq() / 4; printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n", freq/1000000, freq%1000000); @@ -416,25 +403,12 @@ cpci690_calibrate_decr(void) tb_to_us = mulhwu_scale_factor(freq, 1000000); } -static __inline__ void -cpci690_set_bat(u32 addr, u32 size) -{ - addr &= 0xfffe0000; - size &= 0x1ffe0000; - size = ((size >> 17) - 1) << 2; - - mb(); - mtspr(SPRN_DBAT1U, addr | size | 0x2); /* Vs == 1; Vp == 0 */ - mtspr(SPRN_DBAT1L, addr | 0x2a); /* WIMG bits == 0101; PP == r/w access */ - mb(); -} - -#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB_MPSC) static void __init cpci690_map_io(void) { io_block_mapping(CONFIG_MV64X60_NEW_BASE, CONFIG_MV64X60_NEW_BASE, - 128 * KB, _PAGE_IO); + 128 * 1024, _PAGE_IO); } #endif @@ -442,14 +416,15 @@ void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) { -#ifdef CONFIG_BLK_DEV_INITRD - initrd_start=initrd_end=0; - initrd_below_start_ok=0; -#endif /* CONFIG_BLK_DEV_INITRD */ - parse_bootinfo(find_bootinfo()); - loops_per_jiffy = cpci690_get_cpu_speed() / HZ; +#ifdef CONFIG_BLK_DEV_INITRD + /* take care of initrd if we have one */ + if (r4) { + initrd_start = r4 + KERNELBASE; + initrd_end = r5 + KERNELBASE; + } +#endif /* CONFIG_BLK_DEV_INITRD */ isa_mem_base = 0; @@ -460,7 +435,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, ppc_md.restart = cpci690_restart; ppc_md.power_off = cpci690_power_off; ppc_md.halt = cpci690_halt; - ppc_md.find_end_of_memory = cpci690_find_end_of_memory; ppc_md.time_init = todc_time_init; ppc_md.set_rtc_time = todc_set_rtc_time; ppc_md.get_rtc_time = todc_get_rtc_time; @@ -468,22 +442,13 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, ppc_md.nvram_write_val = todc_direct_write_val; ppc_md.calibrate_decr = cpci690_calibrate_decr; - /* - * Need to map in board regs (used by cpci690_find_end_of_memory()) - * and the bridge's regs (used by progress); - */ - cpci690_set_bat(CPCI690_BR_BASE, 32 * MB); - cpci690_br_base = CPCI690_BR_BASE; - -#ifdef CONFIG_SERIAL_TEXT_DEBUG +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB_MPSC) ppc_md.setup_io_mappings = cpci690_map_io; +#ifdef CONFIG_SERIAL_TEXT_DEBUG ppc_md.progress = mv64x60_mpsc_progress; mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE); #endif /* CONFIG_SERIAL_TEXT_DEBUG */ -#ifdef CONFIG_KGDB - ppc_md.setup_io_mappings = cpci690_map_io; - ppc_md.early_serial_map = cpci690_early_serial_map; -#endif /* CONFIG_KGDB */ +#endif /* defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB_MPSC) */ #if defined(CONFIG_SERIAL_MPSC) platform_notify = cpci690_platform_notify; diff --git a/arch/ppc/platforms/cpci690.h b/arch/ppc/platforms/cpci690.h index 36cd2673c742..49584c9cedf3 100644 --- a/arch/ppc/platforms/cpci690.h +++ b/arch/ppc/platforms/cpci690.h @@ -73,6 +73,4 @@ typedef struct board_info { #define CPCI690_MPSC_BAUD 9600 #define CPCI690_MPSC_CLK_SRC 8 /* TCLK */ -#define CPCI690_BUS_FREQ 133333333 - #endif /* __PPC_PLATFORMS_CPCI690_H */ diff --git a/arch/ppc/platforms/ev64360.c b/arch/ppc/platforms/ev64360.c new file mode 100644 index 000000000000..9811a8a52c25 --- /dev/null +++ b/arch/ppc/platforms/ev64360.c @@ -0,0 +1,510 @@ +/* + * arch/ppc/platforms/ev64360.c + * + * Board setup routines for the Marvell EV-64360-BP Evaluation Board. + * + * Author: Lee Nicks <allinux@gmail.com> + * + * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il + * Based on code done by - Mark A. Greer <mgreer@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/console.h> +#include <linux/initrd.h> +#include <linux/root_dev.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/bootmem.h> +#include <linux/mtd/physmap.h> +#include <linux/mv643xx.h> +#ifdef CONFIG_BOOTIMG +#include <linux/bootimg.h> +#endif +#include <asm/page.h> +#include <asm/time.h> +#include <asm/smp.h> +#include <asm/todc.h> +#include <asm/bootinfo.h> +#include <asm/ppcboot.h> +#include <asm/mv64x60.h> +#include <platforms/ev64360.h> + +#define BOARD_VENDOR "Marvell" +#define BOARD_MACHINE "EV-64360-BP" + +static struct mv64x60_handle bh; +static void __iomem *sram_base; + +static u32 ev64360_flash_size_0; +static u32 ev64360_flash_size_1; + +static u32 ev64360_bus_frequency; + +unsigned char __res[sizeof(bd_t)]; + +static int __init +ev64360_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + return 0; +} + +static void __init +ev64360_setup_bridge(void) +{ + struct mv64x60_setup_info si; + int i; + + memset(&si, 0, sizeof(si)); + + si.phys_reg_base = CONFIG_MV64X60_NEW_BASE; + + #ifdef CONFIG_PCI + si.pci_1.enable_bus = 1; + si.pci_1.pci_io.cpu_base = EV64360_PCI1_IO_START_PROC_ADDR; + si.pci_1.pci_io.pci_base_hi = 0; + si.pci_1.pci_io.pci_base_lo = EV64360_PCI1_IO_START_PCI_ADDR; + si.pci_1.pci_io.size = EV64360_PCI1_IO_SIZE; + si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE; + si.pci_1.pci_mem[0].cpu_base = EV64360_PCI1_MEM_START_PROC_ADDR; + si.pci_1.pci_mem[0].pci_base_hi = EV64360_PCI1_MEM_START_PCI_HI_ADDR; + si.pci_1.pci_mem[0].pci_base_lo = EV64360_PCI1_MEM_START_PCI_LO_ADDR; + si.pci_1.pci_mem[0].size = EV64360_PCI1_MEM_SIZE; + si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE; + si.pci_1.pci_cmd_bits = 0; + si.pci_1.latency_timer = 0x80; + #else + si.pci_0.enable_bus = 0; + si.pci_1.enable_bus = 0; + #endif + + for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) { +#if defined(CONFIG_NOT_COHERENT_CACHE) + si.cpu_prot_options[i] = 0; + si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; + si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; + si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; + + si.pci_1.acc_cntl_options[i] = + MV64360_PCI_ACC_CNTL_SNOOP_NONE | + MV64360_PCI_ACC_CNTL_SWAP_NONE | + MV64360_PCI_ACC_CNTL_MBURST_128_BYTES | + MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES; +#else + si.cpu_prot_options[i] = 0; + si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; /* errata */ + si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; /* errata */ + si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; /* errata */ + + si.pci_1.acc_cntl_options[i] = + MV64360_PCI_ACC_CNTL_SNOOP_WB | + MV64360_PCI_ACC_CNTL_SWAP_NONE | + MV64360_PCI_ACC_CNTL_MBURST_32_BYTES | + MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES; +#endif + } + + if (mv64x60_init(&bh, &si)) + printk(KERN_WARNING "Bridge initialization failed.\n"); + + #ifdef CONFIG_PCI + pci_dram_offset = 0; /* sys mem at same addr on PCI & cpu bus */ + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = ev64360_map_irq; + ppc_md.pci_exclude_device = mv64x60_pci_exclude_device; + + mv64x60_set_bus(&bh, 1, 0); + bh.hose_b->first_busno = 0; + bh.hose_b->last_busno = 0xff; + #endif +} + +/* Bridge & platform setup routines */ +void __init +ev64360_intr_setup(void) +{ + /* MPP 8, 9, and 10 */ + mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0xfff); + + /* + * Define GPP 8,9,and 10 interrupt polarity as active low + * input signal and level triggered + */ + mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, 0x700); + mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, 0x700); + + /* Config GPP intr ctlr to respond to level trigger */ + mv64x60_set_bits(&bh, MV64x60_COMM_ARBITER_CNTL, (1<<10)); + + /* Erranum FEr PCI-#8 */ + mv64x60_clr_bits(&bh, MV64x60_PCI0_CMD, (1<<5) | (1<<9)); + mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<5) | (1<<9)); + + /* + * Dismiss and then enable interrupt on GPP interrupt cause + * for CPU #0 + */ + mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~0x700); + mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, 0x700); + + /* + * Dismiss and then enable interrupt on CPU #0 high cause reg + * BIT25 summarizes GPP interrupts 8-15 + */ + mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, (1<<25)); +} + +void __init +ev64360_setup_peripherals(void) +{ + u32 base; + + /* Set up window for boot CS */ + mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN, + EV64360_BOOT_WINDOW_BASE, EV64360_BOOT_WINDOW_SIZE, 0); + bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN); + + /* We only use the 32-bit flash */ + mv64x60_get_32bit_window(&bh, MV64x60_CPU2BOOT_WIN, &base, + &ev64360_flash_size_0); + ev64360_flash_size_1 = 0; + + mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, + EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE, 0); + bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN); + + mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN, + EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0); + bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN); + sram_base = ioremap(EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE); + + /* Set up Enet->SRAM window */ + mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN, + EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0x2); + bh.ci->enable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN); + + /* Give enet r/w access to memory region */ + mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_0, (0x3 << (4 << 1))); + mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_1, (0x3 << (4 << 1))); + mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_2, (0x3 << (4 << 1))); + + mv64x60_clr_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, (1 << 3)); + mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL, + ((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24))); + +#if defined(CONFIG_NOT_COHERENT_CACHE) + mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x00160000); +#else + mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2); +#endif + + /* + * Setting the SRAM to 0. Note that this generates parity errors on + * internal data path in SRAM since it's first time accessing it + * while after reset it's not configured. + */ + memset(sram_base, 0, MV64360_SRAM_SIZE); + + /* set up PCI interrupt controller */ + ev64360_intr_setup(); +} + +static void __init +ev64360_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("ev64360_setup_arch: enter", 0); + + set_tb(0, 0); + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_SDA2; +#endif + + /* + * Set up the L2CR register. + */ + _set_L2CR(L2CR_L2E | L2CR_L2PE); + + if (ppc_md.progress) + ppc_md.progress("ev64360_setup_arch: calling setup_bridge", 0); + + ev64360_setup_bridge(); + ev64360_setup_peripherals(); + ev64360_bus_frequency = ev64360_bus_freq(); + + printk(KERN_INFO "%s %s port (C) 2005 Lee Nicks " + "(allinux@gmail.com)\n", BOARD_VENDOR, BOARD_MACHINE); + if (ppc_md.progress) + ppc_md.progress("ev64360_setup_arch: exit", 0); +} + +/* Platform device data fixup routines. */ +#if defined(CONFIG_SERIAL_MPSC) +static void __init +ev64360_fixup_mpsc_pdata(struct platform_device *pdev) +{ + struct mpsc_pdata *pdata; + + pdata = (struct mpsc_pdata *)pdev->dev.platform_data; + + pdata->max_idle = 40; + pdata->default_baud = EV64360_DEFAULT_BAUD; + pdata->brg_clk_src = EV64360_MPSC_CLK_SRC; + /* + * TCLK (not SysCLk) is routed to BRG, then to the MPSC. On most parts, + * TCLK == SysCLK but on 64460, they are separate pins. + * SysCLK can go up to 200 MHz but TCLK can only go up to 133 MHz. + */ + pdata->brg_clk_freq = min(ev64360_bus_frequency, MV64x60_TCLK_FREQ_MAX); +} +#endif + +#if defined(CONFIG_MV643XX_ETH) +static void __init +ev64360_fixup_eth_pdata(struct platform_device *pdev) +{ + struct mv643xx_eth_platform_data *eth_pd; + static u16 phy_addr[] = { + EV64360_ETH0_PHY_ADDR, + EV64360_ETH1_PHY_ADDR, + EV64360_ETH2_PHY_ADDR, + }; + + eth_pd = pdev->dev.platform_data; + eth_pd->force_phy_addr = 1; + eth_pd->phy_addr = phy_addr[pdev->id]; + eth_pd->tx_queue_size = EV64360_ETH_TX_QUEUE_SIZE; + eth_pd->rx_queue_size = EV64360_ETH_RX_QUEUE_SIZE; +} +#endif + +static int __init +ev64360_platform_notify(struct device *dev) +{ + static struct { + char *bus_id; + void ((*rtn)(struct platform_device *pdev)); + } dev_map[] = { +#if defined(CONFIG_SERIAL_MPSC) + { MPSC_CTLR_NAME ".0", ev64360_fixup_mpsc_pdata }, + { MPSC_CTLR_NAME ".1", ev64360_fixup_mpsc_pdata }, +#endif +#if defined(CONFIG_MV643XX_ETH) + { MV643XX_ETH_NAME ".0", ev64360_fixup_eth_pdata }, + { MV643XX_ETH_NAME ".1", ev64360_fixup_eth_pdata }, + { MV643XX_ETH_NAME ".2", ev64360_fixup_eth_pdata }, +#endif + }; + struct platform_device *pdev; + int i; + + if (dev && dev->bus_id) + for (i=0; i<ARRAY_SIZE(dev_map); i++) + if (!strncmp(dev->bus_id, dev_map[i].bus_id, + BUS_ID_SIZE)) { + + pdev = container_of(dev, + struct platform_device, dev); + dev_map[i].rtn(pdev); + } + + return 0; +} + +#ifdef CONFIG_MTD_PHYSMAP + +#ifndef MB +#define MB (1 << 20) +#endif + +/* + * MTD Layout. + * + * FLASH Amount: 0xff000000 - 0xffffffff + * ------------- ----------------------- + * Reserved: 0xff000000 - 0xff03ffff + * JFFS2 file system: 0xff040000 - 0xffefffff + * U-boot: 0xfff00000 - 0xffffffff + */ +static int __init +ev64360_setup_mtd(void) +{ + u32 size; + int ptbl_entries; + static struct mtd_partition *ptbl; + + size = ev64360_flash_size_0 + ev64360_flash_size_1; + if (!size) + return -ENOMEM; + + ptbl_entries = 3; + + if ((ptbl = kmalloc(ptbl_entries * sizeof(struct mtd_partition), + GFP_KERNEL)) == NULL) { + + printk(KERN_WARNING "Can't alloc MTD partition table\n"); + return -ENOMEM; + } + memset(ptbl, 0, ptbl_entries * sizeof(struct mtd_partition)); + + ptbl[0].name = "reserved"; + ptbl[0].offset = 0; + ptbl[0].size = EV64360_MTD_RESERVED_SIZE; + ptbl[1].name = "jffs2"; + ptbl[1].offset = EV64360_MTD_RESERVED_SIZE; + ptbl[1].size = EV64360_MTD_JFFS2_SIZE; + ptbl[2].name = "U-BOOT"; + ptbl[2].offset = EV64360_MTD_RESERVED_SIZE + EV64360_MTD_JFFS2_SIZE; + ptbl[2].size = EV64360_MTD_UBOOT_SIZE; + + physmap_map.size = size; + physmap_set_partitions(ptbl, ptbl_entries); + return 0; +} + +arch_initcall(ev64360_setup_mtd); +#endif + +static void +ev64360_restart(char *cmd) +{ + ulong i = 0xffffffff; + volatile unsigned char * rtc_base = ioremap(EV64360_RTC_WINDOW_BASE,0x4000); + + /* issue hard reset */ + rtc_base[0xf] = 0x80; + rtc_base[0xc] = 0x00; + rtc_base[0xd] = 0x01; + rtc_base[0xf] = 0x83; + + while (i-- > 0) ; + panic("restart failed\n"); +} + +static void +ev64360_halt(void) +{ + while (1) ; + /* NOTREACHED */ +} + +static void +ev64360_power_off(void) +{ + ev64360_halt(); + /* NOTREACHED */ +} + +static int +ev64360_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n"); + seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n"); + seq_printf(m, "bus speed\t: %dMHz\n", ev64360_bus_frequency/1000/1000); + + return 0; +} + +static void __init +ev64360_calibrate_decr(void) +{ + u32 freq; + + freq = ev64360_bus_frequency / 4; + + printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n", + (long)freq / 1000000, (long)freq % 1000000); + + tb_ticks_per_jiffy = freq / HZ; + tb_to_us = mulhwu_scale_factor(freq, 1000000); +} + +unsigned long __init +ev64360_find_end_of_memory(void) +{ + return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE, + MV64x60_TYPE_MV64360); +} + +static inline void +ev64360_set_bat(void) +{ + mb(); + mtspr(SPRN_DBAT2U, 0xf0001ffe); + mtspr(SPRN_DBAT2L, 0xf000002a); + mb(); +} + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE) +static void __init +ev64360_map_io(void) +{ + io_block_mapping(CONFIG_MV64X60_NEW_BASE, \ + CONFIG_MV64X60_NEW_BASE, \ + 0x00020000, _PAGE_IO); +} +#endif + +void __init +platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + parse_bootinfo(find_bootinfo()); + + /* ASSUMPTION: If both r3 (bd_t pointer) and r6 (cmdline pointer) + * are non-zero, then we should use the board info from the bd_t + * structure and the cmdline pointed to by r6 instead of the + * information from birecs, if any. Otherwise, use the information + * from birecs as discovered by the preceeding call to + * parse_bootinfo(). This rule should work with both PPCBoot, which + * uses a bd_t board info structure, and the kernel boot wrapper, + * which uses birecs. + */ + if (r3 && r6) { + /* copy board info structure */ + memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) ); + /* copy command line */ + *(char *)(r7+KERNELBASE) = 0; + strcpy(cmd_line, (char *)(r6+KERNELBASE)); + } + #ifdef CONFIG_ISA + isa_mem_base = 0; + #endif + + ppc_md.setup_arch = ev64360_setup_arch; + ppc_md.show_cpuinfo = ev64360_show_cpuinfo; + ppc_md.init_IRQ = mv64360_init_irq; + ppc_md.get_irq = mv64360_get_irq; + ppc_md.restart = ev64360_restart; + ppc_md.power_off = ev64360_power_off; + ppc_md.halt = ev64360_halt; + ppc_md.find_end_of_memory = ev64360_find_end_of_memory; + ppc_md.calibrate_decr = ev64360_calibrate_decr; + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE) + ppc_md.setup_io_mappings = ev64360_map_io; + ppc_md.progress = mv64x60_mpsc_progress; + mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE); +#endif + +#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH) + platform_notify = ev64360_platform_notify; +#endif + + ev64360_set_bat(); /* Need for ev64360_find_end_of_memory and progress */ +} diff --git a/arch/ppc/platforms/ev64360.h b/arch/ppc/platforms/ev64360.h new file mode 100644 index 000000000000..68eabe490397 --- /dev/null +++ b/arch/ppc/platforms/ev64360.h @@ -0,0 +1,116 @@ +/* + * arch/ppc/platforms/ev64360.h + * + * Definitions for Marvell EV-64360-BP Evaluation Board. + * + * Author: Lee Nicks <allinux@gmail.com> + * + * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il + * Based on code done by Mark A. Greer <mgreer@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/* + * The MV64360 has 2 PCI buses each with 1 window from the CPU bus to + * PCI I/O space and 4 windows from the CPU bus to PCI MEM space. + * We'll only use one PCI MEM window on each PCI bus. + * + * This is the CPU physical memory map (windows must be at least 64KB and start + * on a boundary that is a multiple of the window size): + * + * 0x42000000-0x4203ffff - Internal SRAM + * 0xf1000000-0xf100ffff - MV64360 Registers (CONFIG_MV64X60_NEW_BASE) + * 0xfc800000-0xfcffffff - RTC + * 0xff000000-0xffffffff - Boot window, 16 MB flash + * 0xc0000000-0xc3ffffff - PCI I/O (second hose) + * 0x80000000-0xbfffffff - PCI MEM (second hose) + */ + +#ifndef __PPC_PLATFORMS_EV64360_H +#define __PPC_PLATFORMS_EV64360_H + +/* CPU Physical Memory Map setup. */ +#define EV64360_BOOT_WINDOW_BASE 0xff000000 +#define EV64360_BOOT_WINDOW_SIZE 0x01000000 /* 16 MB */ +#define EV64360_INTERNAL_SRAM_BASE 0x42000000 +#define EV64360_RTC_WINDOW_BASE 0xfc800000 +#define EV64360_RTC_WINDOW_SIZE 0x00800000 /* 8 MB */ + +#define EV64360_PCI1_MEM_START_PROC_ADDR 0x80000000 +#define EV64360_PCI1_MEM_START_PCI_HI_ADDR 0x00000000 +#define EV64360_PCI1_MEM_START_PCI_LO_ADDR 0x80000000 +#define EV64360_PCI1_MEM_SIZE 0x40000000 /* 1 GB */ +#define EV64360_PCI1_IO_START_PROC_ADDR 0xc0000000 +#define EV64360_PCI1_IO_START_PCI_ADDR 0x00000000 +#define EV64360_PCI1_IO_SIZE 0x04000000 /* 64 MB */ + +#define EV64360_DEFAULT_BAUD 115200 +#define EV64360_MPSC_CLK_SRC 8 /* TCLK */ +#define EV64360_MPSC_CLK_FREQ 133333333 + +#define EV64360_MTD_RESERVED_SIZE 0x40000 +#define EV64360_MTD_JFFS2_SIZE 0xec0000 +#define EV64360_MTD_UBOOT_SIZE 0x100000 + +#define EV64360_ETH0_PHY_ADDR 8 +#define EV64360_ETH1_PHY_ADDR 9 +#define EV64360_ETH2_PHY_ADDR 10 + +#define EV64360_ETH_TX_QUEUE_SIZE 800 +#define EV64360_ETH_RX_QUEUE_SIZE 400 + +#define EV64360_ETH_PORT_CONFIG_VALUE \ + ETH_UNICAST_NORMAL_MODE | \ + ETH_DEFAULT_RX_QUEUE_0 | \ + ETH_DEFAULT_RX_ARP_QUEUE_0 | \ + ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP | \ + ETH_RECEIVE_BC_IF_IP | \ + ETH_RECEIVE_BC_IF_ARP | \ + ETH_CAPTURE_TCP_FRAMES_DIS | \ + ETH_CAPTURE_UDP_FRAMES_DIS | \ + ETH_DEFAULT_RX_TCP_QUEUE_0 | \ + ETH_DEFAULT_RX_UDP_QUEUE_0 | \ + ETH_DEFAULT_RX_BPDU_QUEUE_0 + +#define EV64360_ETH_PORT_CONFIG_EXTEND_VALUE \ + ETH_SPAN_BPDU_PACKETS_AS_NORMAL | \ + ETH_PARTITION_DISABLE + +#define GT_ETH_IPG_INT_RX(value) \ + ((value & 0x3fff) << 8) + +#define EV64360_ETH_PORT_SDMA_CONFIG_VALUE \ + ETH_RX_BURST_SIZE_4_64BIT | \ + GT_ETH_IPG_INT_RX(0) | \ + ETH_TX_BURST_SIZE_4_64BIT + +#define EV64360_ETH_PORT_SERIAL_CONTROL_VALUE \ + ETH_FORCE_LINK_PASS | \ + ETH_ENABLE_AUTO_NEG_FOR_DUPLX | \ + ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL | \ + ETH_ADV_SYMMETRIC_FLOW_CTRL | \ + ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ + ETH_FORCE_BP_MODE_NO_JAM | \ + BIT9 | \ + ETH_DO_NOT_FORCE_LINK_FAIL | \ + ETH_RETRANSMIT_16_ATTEMPTS | \ + ETH_ENABLE_AUTO_NEG_SPEED_GMII | \ + ETH_DTE_ADV_0 | \ + ETH_DISABLE_AUTO_NEG_BYPASS | \ + ETH_AUTO_NEG_NO_CHANGE | \ + ETH_MAX_RX_PACKET_9700BYTE | \ + ETH_CLR_EXT_LOOPBACK | \ + ETH_SET_FULL_DUPLEX_MODE | \ + ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX + +static inline u32 +ev64360_bus_freq(void) +{ + return 133333333; +} + +#endif /* __PPC_PLATFORMS_EV64360_H */ diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c index b659d7b3d747..ff3796860123 100644 --- a/arch/ppc/platforms/hdpu.c +++ b/arch/ppc/platforms/hdpu.c @@ -58,7 +58,7 @@ static void parse_bootinfo(unsigned long r3, static void hdpu_set_l1pe(void); static void hdpu_cpustate_set(unsigned char new_state); #ifdef CONFIG_SMP -static spinlock_t timebase_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(timebase_lock); static unsigned int timebase_upper = 0, timebase_lower = 0; extern int smp_tb_synchronized; diff --git a/arch/ppc/platforms/k2.c b/arch/ppc/platforms/k2.c deleted file mode 100644 index aacb438708ff..000000000000 --- a/arch/ppc/platforms/k2.c +++ /dev/null @@ -1,613 +0,0 @@ -/* - * arch/ppc/platforms/k2.c - * - * Board setup routines for SBS K2 - * - * Author: Matt Porter <mporter@mvista.com> - * - * Updated by: Randy Vinson <rvinson@mvista.com. - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/config.h> -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/types.h> -#include <linux/major.h> -#include <linux/initrd.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/ide.h> -#include <linux/irq.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/dma.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/time.h> -#include <asm/i8259.h> -#include <asm/todc.h> -#include <asm/bootinfo.h> - -#include <syslib/cpc710.h> -#include "k2.h" - -extern unsigned long loops_per_jiffy; -extern void gen550_progress(char *, unsigned short); - -static unsigned int cpu_7xx[16] = { - 0, 15, 14, 0, 0, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0 -}; -static unsigned int cpu_6xx[16] = { - 0, 0, 14, 0, 0, 13, 5, 9, 6, 11, 8, 10, 0, 12, 7, 0 -}; - -static inline int __init -k2_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); - /* - * Check our hose index. If we are zero then we are on the - * local PCI hose, otherwise we are on the cPCI hose. - */ - if (!hose->index) { - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {1, 0, 0, 0}, /* Ethernet */ - {5, 5, 5, 5}, /* PMC Site 1 */ - {6, 6, 6, 6}, /* PMC Site 2 */ - {0, 0, 0, 0}, /* unused */ - {0, 0, 0, 0}, /* unused */ - {0, 0, 0, 0}, /* PCI-ISA Bridge */ - {0, 0, 0, 0}, /* unused */ - {0, 0, 0, 0}, /* unused */ - {0, 0, 0, 0}, /* unused */ - {0, 0, 0, 0}, /* unused */ - {0, 0, 0, 0}, /* unused */ - {0, 0, 0, 0}, /* unused */ - {0, 0, 0, 0}, /* unused */ - {0, 0, 0, 0}, /* unused */ - {15, 0, 0, 0}, /* M5229 IDE */ - }; - const long min_idsel = 3, max_idsel = 17, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; - } else { - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {10, 11, 12, 9}, /* cPCI slot 8 */ - {11, 12, 9, 10}, /* cPCI slot 7 */ - {12, 9, 10, 11}, /* cPCI slot 6 */ - {9, 10, 11, 12}, /* cPCI slot 5 */ - {10, 11, 12, 9}, /* cPCI slot 4 */ - {11, 12, 9, 10}, /* cPCI slot 3 */ - {12, 9, 10, 11}, /* cPCI slot 2 */ - }; - const long min_idsel = 15, max_idsel = 21, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; - } -} - -void k2_pcibios_fixup(void) -{ -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) - struct pci_dev *ide_dev; - - /* - * Enable DMA support on hdc - */ - ide_dev = pci_get_device(PCI_VENDOR_ID_AL, - PCI_DEVICE_ID_AL_M5229, NULL); - - if (ide_dev) { - - unsigned long ide_dma_base; - - ide_dma_base = pci_resource_start(ide_dev, 4); - outb(0x00, ide_dma_base + 0x2); - outb(0x20, ide_dma_base + 0xa); - pci_dev_put(ide_dev); - } -#endif -} - -void k2_pcibios_fixup_resources(struct pci_dev *dev) -{ - int i; - - if ((dev->vendor == PCI_VENDOR_ID_IBM) && - (dev->device == PCI_DEVICE_ID_IBM_CPC710_PCI64)) { - pr_debug("Fixup CPC710 resources\n"); - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { - dev->resource[i].start = 0; - dev->resource[i].end = 0; - } - } -} - -void k2_setup_hoses(void) -{ - struct pci_controller *hose_a, *hose_b; - - /* - * Reconfigure CPC710 memory map so - * we have some more PCI memory space. - */ - - /* Set FPHB mode */ - __raw_writel(0x808000e0, PGCHP); /* Set FPHB mode */ - - /* PCI32 mappings */ - __raw_writel(0x00000000, K2_PCI32_BAR + PIBAR); /* PCI I/O base */ - __raw_writel(0x00000000, K2_PCI32_BAR + PMBAR); /* PCI Mem base */ - __raw_writel(0xf0000000, K2_PCI32_BAR + MSIZE); /* 256MB */ - __raw_writel(0xfff00000, K2_PCI32_BAR + IOSIZE); /* 1MB */ - __raw_writel(0xc0000000, K2_PCI32_BAR + SMBAR); /* Base@0xc0000000 */ - __raw_writel(0x80000000, K2_PCI32_BAR + SIBAR); /* Base@0x80000000 */ - __raw_writel(0x000000c0, K2_PCI32_BAR + PSSIZE); /* 1GB space */ - __raw_writel(0x000000c0, K2_PCI32_BAR + PPSIZE); /* 1GB space */ - __raw_writel(0x00000000, K2_PCI32_BAR + BARPS); /* Base@0x00000000 */ - __raw_writel(0x00000000, K2_PCI32_BAR + BARPP); /* Base@0x00000000 */ - __raw_writel(0x00000080, K2_PCI32_BAR + PSBAR); /* Base@0x80 */ - __raw_writel(0x00000000, K2_PCI32_BAR + PPBAR); - - __raw_writel(0xc0000000, K2_PCI32_BAR + BPMDLK); - __raw_writel(0xd0000000, K2_PCI32_BAR + TPMDLK); - __raw_writel(0x80000000, K2_PCI32_BAR + BIODLK); - __raw_writel(0x80100000, K2_PCI32_BAR + TIODLK); - __raw_writel(0xe0008000, K2_PCI32_BAR + DLKCTRL); - __raw_writel(0xffffffff, K2_PCI32_BAR + DLKDEV); - - /* PCI64 mappings */ - __raw_writel(0x00100000, K2_PCI64_BAR + PIBAR); /* PCI I/O base */ - __raw_writel(0x10000000, K2_PCI64_BAR + PMBAR); /* PCI Mem base */ - __raw_writel(0xf0000000, K2_PCI64_BAR + MSIZE); /* 256MB */ - __raw_writel(0xfff00000, K2_PCI64_BAR + IOSIZE); /* 1MB */ - __raw_writel(0xd0000000, K2_PCI64_BAR + SMBAR); /* Base@0xd0000000 */ - __raw_writel(0x80100000, K2_PCI64_BAR + SIBAR); /* Base@0x80100000 */ - __raw_writel(0x000000c0, K2_PCI64_BAR + PSSIZE); /* 1GB space */ - __raw_writel(0x000000c0, K2_PCI64_BAR + PPSIZE); /* 1GB space */ - __raw_writel(0x00000000, K2_PCI64_BAR + BARPS); /* Base@0x00000000 */ - __raw_writel(0x00000000, K2_PCI64_BAR + BARPP); /* Base@0x00000000 */ - - /* Setup PCI32 hose */ - hose_a = pcibios_alloc_controller(); - if (!hose_a) - return; - - hose_a->first_busno = 0; - hose_a->last_busno = 0xff; - hose_a->pci_mem_offset = K2_PCI32_MEM_BASE; - - pci_init_resource(&hose_a->io_resource, - K2_PCI32_LOWER_IO, - K2_PCI32_UPPER_IO, - IORESOURCE_IO, "PCI32 host bridge"); - - pci_init_resource(&hose_a->mem_resources[0], - K2_PCI32_LOWER_MEM + K2_PCI32_MEM_BASE, - K2_PCI32_UPPER_MEM + K2_PCI32_MEM_BASE, - IORESOURCE_MEM, "PCI32 host bridge"); - - hose_a->io_space.start = K2_PCI32_LOWER_IO; - hose_a->io_space.end = K2_PCI32_UPPER_IO; - hose_a->mem_space.start = K2_PCI32_LOWER_MEM; - hose_a->mem_space.end = K2_PCI32_UPPER_MEM; - hose_a->io_base_virt = (void *)K2_ISA_IO_BASE; - - setup_indirect_pci(hose_a, K2_PCI32_CONFIG_ADDR, K2_PCI32_CONFIG_DATA); - - /* Initialize PCI32 bus registers */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(0, 0), - CPC710_BUS_NUMBER, hose_a->first_busno); - - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, hose_a->last_busno); - - /* Enable PCI interrupt polling */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(8, 0), 0x45, 0x80); - - /* Route polled PCI interrupts */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(8, 0), 0x48, 0x58); - - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(8, 0), 0x49, 0x07); - - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(8, 0), 0x4a, 0x31); - - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(8, 0), 0x4b, 0xb9); - - /* route secondary IDE channel interrupt to IRQ 15 */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(8, 0), 0x75, 0x0f); - - /* enable IDE controller IDSEL */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(8, 0), 0x58, 0x48); - - /* Enable IDE function */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(17, 0), 0x50, 0x03); - - /* Set M5229 IDE controller to native mode */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(17, 0), PCI_CLASS_PROG, 0xdf); - - hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno); - - /* Write out correct max subordinate bus number for hose A */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, hose_a->last_busno); - - /* Only setup PCI64 hose if we are in the system slot */ - if (!(readb(K2_MISC_REG) & K2_SYS_SLOT_MASK)) { - /* Setup PCI64 hose */ - hose_b = pcibios_alloc_controller(); - if (!hose_b) - return; - - hose_b->first_busno = hose_a->last_busno + 1; - hose_b->last_busno = 0xff; - - /* Reminder: quit changing the following, it is correct. */ - hose_b->pci_mem_offset = K2_PCI32_MEM_BASE; - - pci_init_resource(&hose_b->io_resource, - K2_PCI64_LOWER_IO, - K2_PCI64_UPPER_IO, - IORESOURCE_IO, "PCI64 host bridge"); - - pci_init_resource(&hose_b->mem_resources[0], - K2_PCI64_LOWER_MEM + K2_PCI32_MEM_BASE, - K2_PCI64_UPPER_MEM + K2_PCI32_MEM_BASE, - IORESOURCE_MEM, "PCI64 host bridge"); - - hose_b->io_space.start = K2_PCI64_LOWER_IO; - hose_b->io_space.end = K2_PCI64_UPPER_IO; - hose_b->mem_space.start = K2_PCI64_LOWER_MEM; - hose_b->mem_space.end = K2_PCI64_UPPER_MEM; - hose_b->io_base_virt = (void *)K2_ISA_IO_BASE; - - setup_indirect_pci(hose_b, - K2_PCI64_CONFIG_ADDR, K2_PCI64_CONFIG_DATA); - - /* Initialize PCI64 bus registers */ - early_write_config_byte(hose_b, - 0, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, 0xff); - - early_write_config_byte(hose_b, - 0, - PCI_DEVFN(0, 0), - CPC710_BUS_NUMBER, hose_b->first_busno); - - hose_b->last_busno = pciauto_bus_scan(hose_b, - hose_b->first_busno); - - /* Write out correct max subordinate bus number for hose B */ - early_write_config_byte(hose_b, - hose_b->first_busno, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, - hose_b->last_busno); - - /* Configure PCI64 PSBAR */ - early_write_config_dword(hose_b, - hose_b->first_busno, - PCI_DEVFN(0, 0), - PCI_BASE_ADDRESS_0, - K2_PCI64_SYS_MEM_BASE); - } - - /* Configure i8259 level/edge settings */ - outb(0x62, 0x4d0); - outb(0xde, 0x4d1); - -#ifdef CONFIG_CPC710_DATA_GATHERING - { - unsigned int tmp; - tmp = __raw_readl(ABCNTL); - /* Enable data gathering on both PCI interfaces */ - __raw_writel(tmp | 0x05000000, ABCNTL); - } -#endif - - ppc_md.pcibios_fixup = k2_pcibios_fixup; - ppc_md.pcibios_fixup_resources = k2_pcibios_fixup_resources; - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = k2_map_irq; -} - -static int k2_get_bus_speed(void) -{ - int bus_speed; - unsigned char board_id; - - board_id = *(unsigned char *)K2_BOARD_ID_REG; - - switch (K2_BUS_SPD(board_id)) { - - case 0: - default: - bus_speed = 100000000; - break; - - case 1: - bus_speed = 83333333; - break; - - case 2: - bus_speed = 75000000; - break; - - case 3: - bus_speed = 66666666; - break; - } - return bus_speed; -} - -static int k2_get_cpu_speed(void) -{ - unsigned long hid1; - int cpu_speed; - - hid1 = mfspr(SPRN_HID1) >> 28; - - if ((mfspr(SPRN_PVR) >> 16) == 8) - hid1 = cpu_7xx[hid1]; - else - hid1 = cpu_6xx[hid1]; - - cpu_speed = k2_get_bus_speed() * hid1 / 2; - return cpu_speed; -} - -static void __init k2_calibrate_decr(void) -{ - int freq, divisor = 4; - - /* determine processor bus speed */ - freq = k2_get_bus_speed(); - tb_ticks_per_jiffy = freq / HZ / divisor; - tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000); -} - -static int k2_show_cpuinfo(struct seq_file *m) -{ - unsigned char k2_geo_bits, k2_system_slot; - - seq_printf(m, "vendor\t\t: SBS\n"); - seq_printf(m, "machine\t\t: K2\n"); - seq_printf(m, "cpu speed\t: %dMhz\n", k2_get_cpu_speed() / 1000000); - seq_printf(m, "bus speed\t: %dMhz\n", k2_get_bus_speed() / 1000000); - seq_printf(m, "memory type\t: SDRAM\n"); - - k2_geo_bits = readb(K2_MSIZ_GEO_REG) & K2_GEO_ADR_MASK; - k2_system_slot = !(readb(K2_MISC_REG) & K2_SYS_SLOT_MASK); - seq_printf(m, "backplane\t: %s slot board", - k2_system_slot ? "System" : "Non system"); - seq_printf(m, "with geographical address %x\n", k2_geo_bits); - - return 0; -} - -TODC_ALLOC(); - -static void __init k2_setup_arch(void) -{ - unsigned int cpu; - - /* Setup TODC access */ - TODC_INIT(TODC_TYPE_MK48T37, 0, 0, - ioremap(K2_RTC_BASE_ADDRESS, K2_RTC_SIZE), 8); - - /* init to some ~sane value until calibrate_delay() runs */ - loops_per_jiffy = 50000000 / HZ; - - /* make FLASH transactions higher priority than PCI to avoid deadlock */ - __raw_writel(__raw_readl(SIOC1) | 0x80000000, SIOC1); - - /* Set hardware to access FLASH page 2 */ - __raw_writel(1 << 29, GPOUT); - - /* Setup PCI host bridges */ - k2_setup_hoses(); - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDC1; -#endif - - /* Identify the system */ - printk(KERN_INFO "System Identification: SBS K2 - PowerPC 750 @ " - "%d Mhz\n", k2_get_cpu_speed() / 1000000); - printk(KERN_INFO "Port by MontaVista Software, Inc. " - "(source@mvista.com)\n"); - - /* Identify the CPU manufacturer */ - cpu = PVR_REV(mfspr(SPRN_PVR)); - printk(KERN_INFO "CPU manufacturer: %s [rev=%04x]\n", - (cpu & (1 << 15)) ? "IBM" : "Motorola", cpu); -} - -static void k2_restart(char *cmd) -{ - local_irq_disable(); - - /* Flip FLASH back to page 1 to access firmware image */ - __raw_writel(0, GPOUT); - - /* SRR0 has system reset vector, SRR1 has default MSR value */ - /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */ - mtspr(SPRN_SRR0, 0xfff00100); - mtspr(SPRN_SRR1, 0); - __asm__ __volatile__("rfi\n\t"); - - /* not reached */ - for (;;) ; -} - -static void k2_power_off(void) -{ - for (;;) ; -} - -static void k2_halt(void) -{ - k2_restart(NULL); -} - -/* - * Set BAT 3 to map PCI32 I/O space. - */ -static __inline__ void k2_set_bat(void) -{ - /* wait for all outstanding memory accesses to complete */ - mb(); - - /* setup DBATs */ - mtspr(SPRN_DBAT2U, 0x80001ffe); - mtspr(SPRN_DBAT2L, 0x8000002a); - mtspr(SPRN_DBAT3U, 0xf0001ffe); - mtspr(SPRN_DBAT3L, 0xf000002a); - - /* wait for updates */ - mb(); -} - -static unsigned long __init k2_find_end_of_memory(void) -{ - unsigned long total; - unsigned char msize = 7; /* Default to 128MB */ - - msize = K2_MEM_SIZE(readb(K2_MSIZ_GEO_REG)); - - switch (msize) { - case 2: - /* - * This will break without a lowered - * KERNELBASE or CONFIG_HIGHMEM on. - * It seems non 1GB builds exist yet, - * though. - */ - total = K2_MEM_SIZE_1GB; - break; - case 3: - case 4: - total = K2_MEM_SIZE_512MB; - break; - case 5: - case 6: - total = K2_MEM_SIZE_256MB; - break; - case 7: - total = K2_MEM_SIZE_128MB; - break; - default: - printk - ("K2: Invalid memory size detected, defaulting to 128MB\n"); - total = K2_MEM_SIZE_128MB; - break; - } - return total; -} - -static void __init k2_map_io(void) -{ - io_block_mapping(K2_PCI32_IO_BASE, - K2_PCI32_IO_BASE, 0x00200000, _PAGE_IO); - io_block_mapping(0xff000000, 0xff000000, 0x01000000, _PAGE_IO); -} - -static void __init k2_init_irq(void) -{ - int i; - - for (i = 0; i < 16; i++) - irq_desc[i].handler = &i8259_pic; - - i8259_init(0); -} - -void __init platform_init(unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, unsigned long r7) -{ - parse_bootinfo((struct bi_record *)(r3 + KERNELBASE)); - - k2_set_bat(); - - isa_io_base = K2_ISA_IO_BASE; - isa_mem_base = K2_ISA_MEM_BASE; - pci_dram_offset = K2_PCI32_SYS_MEM_BASE; - - ppc_md.setup_arch = k2_setup_arch; - ppc_md.show_cpuinfo = k2_show_cpuinfo; - ppc_md.init_IRQ = k2_init_irq; - ppc_md.get_irq = i8259_irq; - - ppc_md.find_end_of_memory = k2_find_end_of_memory; - ppc_md.setup_io_mappings = k2_map_io; - - ppc_md.restart = k2_restart; - ppc_md.power_off = k2_power_off; - ppc_md.halt = k2_halt; - - ppc_md.time_init = todc_time_init; - ppc_md.set_rtc_time = todc_set_rtc_time; - ppc_md.get_rtc_time = todc_get_rtc_time; - ppc_md.calibrate_decr = k2_calibrate_decr; - - ppc_md.nvram_read_val = todc_direct_read_val; - ppc_md.nvram_write_val = todc_direct_write_val; - -#ifdef CONFIG_SERIAL_TEXT_DEBUG - ppc_md.progress = gen550_progress; -#endif -} diff --git a/arch/ppc/platforms/k2.h b/arch/ppc/platforms/k2.h deleted file mode 100644 index 78326aba1988..000000000000 --- a/arch/ppc/platforms/k2.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * arch/ppc/platforms/k2.h - * - * Definitions for SBS K2 board support - * - * Author: Matt Porter <mporter@mvista.com> - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __PPC_PLATFORMS_K2_H -#define __PPC_PLATFORMS_K2_H - -/* - * SBS K2 definitions - */ - -#define K2_PCI64_BAR 0xff400000 -#define K2_PCI32_BAR 0xff500000 - -#define K2_PCI64_CONFIG_ADDR (K2_PCI64_BAR + 0x000f8000) -#define K2_PCI64_CONFIG_DATA (K2_PCI64_BAR + 0x000f8010) - -#define K2_PCI32_CONFIG_ADDR (K2_PCI32_BAR + 0x000f8000) -#define K2_PCI32_CONFIG_DATA (K2_PCI32_BAR + 0x000f8010) - -#define K2_PCI64_MEM_BASE 0xd0000000 -#define K2_PCI64_IO_BASE 0x80100000 - -#define K2_PCI32_MEM_BASE 0xc0000000 -#define K2_PCI32_IO_BASE 0x80000000 - -#define K2_PCI32_SYS_MEM_BASE 0x80000000 -#define K2_PCI64_SYS_MEM_BASE K2_PCI32_SYS_MEM_BASE - -#define K2_PCI32_LOWER_MEM 0x00000000 -#define K2_PCI32_UPPER_MEM 0x0fffffff -#define K2_PCI32_LOWER_IO 0x00000000 -#define K2_PCI32_UPPER_IO 0x000fffff - -#define K2_PCI64_LOWER_MEM 0x10000000 -#define K2_PCI64_UPPER_MEM 0x1fffffff -#define K2_PCI64_LOWER_IO 0x00100000 -#define K2_PCI64_UPPER_IO 0x001fffff - -#define K2_ISA_IO_BASE K2_PCI32_IO_BASE -#define K2_ISA_MEM_BASE K2_PCI32_MEM_BASE - -#define K2_BOARD_ID_REG (K2_ISA_IO_BASE + 0x800) -#define K2_MISC_REG (K2_ISA_IO_BASE + 0x804) -#define K2_MSIZ_GEO_REG (K2_ISA_IO_BASE + 0x808) -#define K2_HOT_SWAP_REG (K2_ISA_IO_BASE + 0x80c) -#define K2_PLD2_REG (K2_ISA_IO_BASE + 0x80e) -#define K2_PLD3_REG (K2_ISA_IO_BASE + 0x80f) - -#define K2_BUS_SPD(board_id) (board_id >> 2) & 3 - -#define K2_RTC_BASE_OFFSET 0x90000 -#define K2_RTC_BASE_ADDRESS (K2_PCI32_MEM_BASE + K2_RTC_BASE_OFFSET) -#define K2_RTC_SIZE 0x8000 - -#define K2_MEM_SIZE_MASK 0xe0 -#define K2_MEM_SIZE(size_reg) (size_reg & K2_MEM_SIZE_MASK) >> 5 -#define K2_MEM_SIZE_1GB 0x40000000 -#define K2_MEM_SIZE_512MB 0x20000000 -#define K2_MEM_SIZE_256MB 0x10000000 -#define K2_MEM_SIZE_128MB 0x08000000 - -#define K2_L2CACHE_MASK 0x03 /* Mask for 2 L2 Cache bits */ -#define K2_L2CACHE_512KB 0x00 /* 512KB */ -#define K2_L2CACHE_256KB 0x01 /* 256KB */ -#define K2_L2CACHE_1MB 0x02 /* 1MB */ -#define K2_L2CACHE_NONE 0x03 /* None */ - -#define K2_GEO_ADR_MASK 0x1f - -#define K2_SYS_SLOT_MASK 0x08 - -#endif /* __PPC_PLATFORMS_K2_H */ diff --git a/arch/ppc/platforms/katana.c b/arch/ppc/platforms/katana.c index 169dbf6534b9..2b53afae0e9c 100644 --- a/arch/ppc/platforms/katana.c +++ b/arch/ppc/platforms/katana.c @@ -33,6 +33,7 @@ #include <linux/bootimg.h> #endif #include <asm/io.h> +#include <asm/unistd.h> #include <asm/page.h> #include <asm/time.h> #include <asm/smp.h> @@ -42,15 +43,14 @@ #include <asm/mv64x60.h> #include <platforms/katana.h> -static struct mv64x60_handle bh; -static katana_id_t katana_id; -static void __iomem *cpld_base; -static void __iomem *sram_base; - -static u32 katana_flash_size_0; -static u32 katana_flash_size_1; - -static u32 katana_bus_frequency; +static struct mv64x60_handle bh; +static katana_id_t katana_id; +static void __iomem *cpld_base; +static void __iomem *sram_base; +static u32 katana_flash_size_0; +static u32 katana_flash_size_1; +static u32 katana_bus_frequency; +static struct pci_controller katana_hose_a; unsigned char __res[sizeof(bd_t)]; @@ -71,8 +71,12 @@ katana_irq_lookup_750i(unsigned char idsel, unsigned char pin) KATANA_PCI_INTA_IRQ_750i, KATANA_PCI_INTB_IRQ_750i }, /* IDSEL 6 (T8110) */ {KATANA_PCI_INTD_IRQ_750i, 0, 0, 0 }, + /* IDSEL 7 (unused) */ + {0, 0, 0, 0 }, + /* IDSEL 8 (Intel 82544) (752i only but doesn't harm 750i) */ + {KATANA_PCI_INTD_IRQ_750i, 0, 0, 0 }, }; - const long min_idsel = 4, max_idsel = 6, irqs_per_slot = 4; + const long min_idsel = 4, max_idsel = 8, irqs_per_slot = 4; return PCI_IRQ_TABLE_LOOKUP; } @@ -148,7 +152,7 @@ katana_get_proc_num(void) save_exclude = mv64x60_pci_exclude_bridge; mv64x60_pci_exclude_bridge = 0; - early_read_config_word(bh.hose_a, 0, + early_read_config_word(bh.hose_b, 0, PCI_DEVFN(0,0), PCI_DEVICE_ID, &val); mv64x60_pci_exclude_bridge = save_exclude; @@ -191,7 +195,8 @@ katana_setup_bridge(void) struct mv64x60_setup_info si; void __iomem *vaddr; int i; - u16 val; + u32 v; + u16 val, type; u8 save_exclude; /* @@ -222,6 +227,20 @@ katana_setup_bridge(void) PCI_DEVICE_ID, val); } + /* + * While we're in here, set the hotswap register correctly. + * Turn off blue LED; mask ENUM#, clear insertion & extraction bits. + */ + early_read_config_dword(&hose, 0, PCI_DEVFN(0, 0), + MV64360_PCICFG_CPCI_HOTSWAP, &v); + v &= ~(1<<19); + v |= ((1<<17) | (1<<22) | (1<<23)); + early_write_config_dword(&hose, 0, PCI_DEVFN(0, 0), + MV64360_PCICFG_CPCI_HOTSWAP, v); + + /* While we're at it, grab the bridge type for later */ + early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_DEVICE_ID, &type); + mv64x60_pci_exclude_bridge = save_exclude; iounmap(vaddr); @@ -251,21 +270,23 @@ katana_setup_bridge(void) si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; si.pci_1.acc_cntl_options[i] = - MV64360_PCI_ACC_CNTL_SNOOP_NONE | - MV64360_PCI_ACC_CNTL_SWAP_NONE | - MV64360_PCI_ACC_CNTL_MBURST_128_BYTES | - MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES; + MV64360_PCI_ACC_CNTL_SNOOP_NONE | + MV64360_PCI_ACC_CNTL_SWAP_NONE | + MV64360_PCI_ACC_CNTL_MBURST_128_BYTES | + MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES; #else si.cpu_prot_options[i] = 0; - si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; /* errata */ - si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; /* errata */ - si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; /* errata */ + si.enet_options[i] = MV64360_ENET2MEM_SNOOP_WB; + si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_WB; + si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_WB; si.pci_1.acc_cntl_options[i] = - MV64360_PCI_ACC_CNTL_SNOOP_WB | - MV64360_PCI_ACC_CNTL_SWAP_NONE | - MV64360_PCI_ACC_CNTL_MBURST_32_BYTES | - MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES; + MV64360_PCI_ACC_CNTL_SNOOP_WB | + MV64360_PCI_ACC_CNTL_SWAP_NONE | + MV64360_PCI_ACC_CNTL_MBURST_32_BYTES | + ((type == PCI_DEVICE_ID_MARVELL_MV64360) ? + MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES : + MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES); #endif } @@ -281,12 +302,26 @@ katana_setup_bridge(void) mv64x60_set_bus(&bh, 1, 0); bh.hose_b->first_busno = 0; bh.hose_b->last_busno = 0xff; + + /* + * Need to access hotswap reg which is in the pci config area of the + * bridge's hose 0. Note that pcibios_alloc_controller() can't be used + * to alloc hose_a b/c that would make hose 0 known to the generic + * pci code which we don't want. + */ + bh.hose_a = &katana_hose_a; + setup_indirect_pci_nomap(bh.hose_a, + bh.v_base + MV64x60_PCI0_CONFIG_ADDR, + bh.v_base + MV64x60_PCI0_CONFIG_DATA); } /* Bridge & platform setup routines */ void __init katana_intr_setup(void) { + if (bh.type == MV64x60_TYPE_MV64460) /* As per instns from Marvell */ + mv64x60_clr_bits(&bh, MV64x60_CPU_MASTER_CNTL, 1 << 15); + /* MPP 8, 9, and 10 */ mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0xfff); @@ -309,9 +344,16 @@ katana_intr_setup(void) /* Config GPP intr ctlr to respond to level trigger */ mv64x60_set_bits(&bh, MV64x60_COMM_ARBITER_CNTL, (1<<10)); - /* Erranum FEr PCI-#8 */ - mv64x60_clr_bits(&bh, MV64x60_PCI0_CMD, (1<<5) | (1<<9)); - mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<5) | (1<<9)); + if (bh.type == MV64x60_TYPE_MV64360) { + /* Erratum FEr PCI-#9 */ + mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, + (1<<4) | (1<<5) | (1<<6) | (1<<7)); + mv64x60_set_bits(&bh, MV64x60_PCI1_CMD, (1<<8) | (1<<9)); + } else { + mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<6) | (1<<7)); + mv64x60_set_bits(&bh, MV64x60_PCI1_CMD, + (1<<4) | (1<<5) | (1<<8) | (1<<9)); + } /* * Dismiss and then enable interrupt on GPP interrupt cause @@ -473,17 +515,46 @@ katana_setup_arch(void) ppc_md.progress("katana_setup_arch: exit", 0); } +void +katana_fixup_resources(struct pci_dev *dev) +{ + u16 v16; + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, L1_CACHE_LINE_SIZE>>2); + + pci_read_config_word(dev, PCI_COMMAND, &v16); + v16 |= PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK; + pci_write_config_word(dev, PCI_COMMAND, v16); +} + +static const unsigned int cpu_750xx[32] = { /* 750FX & 750GX */ + 0, 0, 2, 2, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,/* 0-15*/ + 16, 17, 18, 19, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40, 0 /*16-31*/ +}; + +static int +katana_get_cpu_freq(void) +{ + unsigned long pll_cfg; + + pll_cfg = (mfspr(SPRN_HID1) & 0xf8000000) >> 27; + return katana_bus_frequency * cpu_750xx[pll_cfg]/2; +} + /* Platform device data fixup routines. */ #if defined(CONFIG_SERIAL_MPSC) static void __init katana_fixup_mpsc_pdata(struct platform_device *pdev) { - struct mpsc_pdata *pdata; + struct mpsc_pdata *pdata = (struct mpsc_pdata *)pdev->dev.platform_data; + bd_t *bdp = (bd_t *)__res; - pdata = (struct mpsc_pdata *)pdev->dev.platform_data; + if (bdp->bi_baudrate) + pdata->default_baud = bdp->bi_baudrate; + else + pdata->default_baud = KATANA_DEFAULT_BAUD; pdata->max_idle = 40; - pdata->default_baud = KATANA_DEFAULT_BAUD; pdata->brg_clk_src = KATANA_MPSC_CLK_SRC; /* * TCLK (not SysCLk) is routed to BRG, then to the MPSC. On most parts, @@ -513,6 +584,18 @@ katana_fixup_eth_pdata(struct platform_device *pdev) } #endif +#if defined(CONFIG_SYSFS) +static void __init +katana_fixup_mv64xxx_pdata(struct platform_device *pdev) +{ + struct mv64xxx_pdata *pdata = (struct mv64xxx_pdata *) + pdev->dev.platform_data; + + /* Katana supports the mv64xxx hotswap register */ + pdata->hs_reg_valid = 1; +} +#endif + static int __init katana_platform_notify(struct device *dev) { @@ -529,6 +612,9 @@ katana_platform_notify(struct device *dev) { MV643XX_ETH_NAME ".1", katana_fixup_eth_pdata }, { MV643XX_ETH_NAME ".2", katana_fixup_eth_pdata }, #endif +#if defined(CONFIG_SYSFS) + { MV64XXX_DEV_NAME ".0", katana_fixup_mv64xxx_pdata }, +#endif }; struct platform_device *pdev; int i; @@ -536,8 +622,7 @@ katana_platform_notify(struct device *dev) if (dev && dev->bus_id) for (i=0; i<ARRAY_SIZE(dev_map); i++) if (!strncmp(dev->bus_id, dev_map[i].bus_id, - BUS_ID_SIZE)) { - + BUS_ID_SIZE)) { pdev = container_of(dev, struct platform_device, dev); dev_map[i].rtn(pdev); @@ -578,8 +663,7 @@ katana_setup_mtd(void) ptbl_entries = (size >= (64*MB)) ? 6 : 4; if ((ptbl = kmalloc(ptbl_entries * sizeof(struct mtd_partition), - GFP_KERNEL)) == NULL) { - + GFP_KERNEL)) == NULL) { printk(KERN_WARNING "Can't alloc MTD partition table\n"); return -ENOMEM; } @@ -611,7 +695,6 @@ katana_setup_mtd(void) physmap_set_partitions(ptbl, ptbl_entries); return 0; } - arch_initcall(katana_setup_mtd); #endif @@ -632,7 +715,22 @@ katana_halt(void) { u8 v; - if (katana_id == KATANA_ID_752I) { + /* Turn on blue LED to indicate its okay to remove */ + if (katana_id == KATANA_ID_750I) { + u32 v; + u8 save_exclude; + + /* Set LOO bit in cPCI HotSwap reg of hose 0 to turn on LED. */ + save_exclude = mv64x60_pci_exclude_bridge; + mv64x60_pci_exclude_bridge = 0; + early_read_config_dword(bh.hose_a, 0, PCI_DEVFN(0, 0), + MV64360_PCICFG_CPCI_HOTSWAP, &v); + v &= 0xff; + v |= (1 << 19); + early_write_config_dword(bh.hose_a, 0, PCI_DEVFN(0, 0), + MV64360_PCICFG_CPCI_HOTSWAP, v); + mv64x60_pci_exclude_bridge = save_exclude; + } else if (katana_id == KATANA_ID_752I) { v = in_8(cpld_base + HSL_PLD_BASE + HSL_PLD_HOT_SWAP_OFF); v |= HSL_PLD_HOT_SWAP_LED_BIT; out_8(cpld_base + HSL_PLD_BASE + HSL_PLD_HOT_SWAP_OFF, v); @@ -652,37 +750,65 @@ katana_power_off(void) static int katana_show_cpuinfo(struct seq_file *m) { + char *s; + + seq_printf(m, "cpu freq\t: %dMHz\n", + (katana_get_cpu_freq() + 500000) / 1000000); + seq_printf(m, "bus freq\t: %ldMHz\n", + ((long)katana_bus_frequency + 500000) / 1000000); seq_printf(m, "vendor\t\t: Artesyn Communication Products, LLC\n"); seq_printf(m, "board\t\t: "); - switch (katana_id) { case KATANA_ID_3750: - seq_printf(m, "Katana 3750\n"); + seq_printf(m, "Katana 3750"); break; case KATANA_ID_750I: - seq_printf(m, "Katana 750i\n"); + seq_printf(m, "Katana 750i"); break; case KATANA_ID_752I: - seq_printf(m, "Katana 752i\n"); + seq_printf(m, "Katana 752i"); break; default: - seq_printf(m, "Unknown\n"); + seq_printf(m, "Unknown"); break; } - - seq_printf(m, "product ID\t: 0x%x\n", + seq_printf(m, " (product id: 0x%x)\n", in_8(cpld_base + KATANA_CPLD_PRODUCT_ID)); + + seq_printf(m, "pci mode\t: %sMonarch\n", + katana_is_monarch()? "" : "Non-"); seq_printf(m, "hardware rev\t: 0x%x\n", in_8(cpld_base+KATANA_CPLD_HARDWARE_VER)); - seq_printf(m, "PLD rev\t\t: 0x%x\n", + seq_printf(m, "pld rev\t\t: 0x%x\n", in_8(cpld_base + KATANA_CPLD_PLD_VER)); - seq_printf(m, "PLB freq\t: %ldMhz\n", - (long)katana_bus_frequency / 1000000); - seq_printf(m, "PCI\t\t: %sMonarch\n", katana_is_monarch()? "" : "Non-"); + + switch(bh.type) { + case MV64x60_TYPE_GT64260A: + s = "gt64260a"; + break; + case MV64x60_TYPE_GT64260B: + s = "gt64260b"; + break; + case MV64x60_TYPE_MV64360: + s = "mv64360"; + break; + case MV64x60_TYPE_MV64460: + s = "mv64460"; + break; + default: + s = "Unknown"; + } + seq_printf(m, "bridge type\t: %s\n", s); + seq_printf(m, "bridge rev\t: 0x%x\n", bh.rev); +#if defined(CONFIG_NOT_COHERENT_CACHE) + seq_printf(m, "coherency\t: %s\n", "off"); +#else + seq_printf(m, "coherency\t: %s\n", "on"); +#endif return 0; } @@ -701,11 +827,20 @@ katana_calibrate_decr(void) tb_to_us = mulhwu_scale_factor(freq, 1000000); } +/* + * The katana supports both uImage and zImage. If uImage, get the mem size + * from the bd info. If zImage, the bootwrapper adds a BI_MEMSIZE entry in + * the bi_rec data which is sucked out and put into boot_mem_size by + * parse_bootinfo(). MMU_init() will then use the boot_mem_size for the mem + * size and not call this routine. The only way this will fail is when a uImage + * is used but the fw doesn't pass in a valid bi_memsize. This should never + * happen, though. + */ unsigned long __init katana_find_end_of_memory(void) { - return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE, - MV64x60_TYPE_MV64360); + bd_t *bdp = (bd_t *)__res; + return bdp->bi_memsize; } #if defined(CONFIG_I2C_MV64XXX) && defined(CONFIG_SENSORS_M41T00) @@ -729,15 +864,6 @@ katana_rtc_hookup(void) late_initcall(katana_rtc_hookup); #endif -static inline void -katana_set_bat(void) -{ - mb(); - mtspr(SPRN_DBAT2U, 0xf0001ffe); - mtspr(SPRN_DBAT2L, 0xf000002a); - mb(); -} - #if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE) static void __init katana_map_io(void) @@ -763,15 +889,24 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, */ if (r3 && r6) { /* copy board info structure */ - memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) ); + memcpy((void *)__res, (void *)(r3+KERNELBASE), sizeof(bd_t)); /* copy command line */ *(char *)(r7+KERNELBASE) = 0; strcpy(cmd_line, (char *)(r6+KERNELBASE)); } +#ifdef CONFIG_BLK_DEV_INITRD + /* take care of initrd if we have one */ + if (r4) { + initrd_start = r4 + KERNELBASE; + initrd_end = r5 + KERNELBASE; + } +#endif /* CONFIG_BLK_DEV_INITRD */ + isa_mem_base = 0; ppc_md.setup_arch = katana_setup_arch; + ppc_md.pcibios_fixup_resources = katana_fixup_resources; ppc_md.show_cpuinfo = katana_show_cpuinfo; ppc_md.init_IRQ = mv64360_init_irq; ppc_md.get_irq = mv64360_get_irq; @@ -790,6 +925,4 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH) platform_notify = katana_platform_notify; #endif - - katana_set_bat(); /* Need for katana_find_end_of_memory and progress */ } diff --git a/arch/ppc/platforms/katana.h b/arch/ppc/platforms/katana.h index b82ed81950f5..597257eff2ec 100644 --- a/arch/ppc/platforms/katana.h +++ b/arch/ppc/platforms/katana.h @@ -56,14 +56,14 @@ #define KATANA_PCI1_IO_SIZE 0x04000000 /* 64 MB */ /* Board-specific IRQ info */ -#define KATANA_PCI_INTA_IRQ_3750 64+8 -#define KATANA_PCI_INTB_IRQ_3750 64+9 -#define KATANA_PCI_INTC_IRQ_3750 64+10 - -#define KATANA_PCI_INTA_IRQ_750i 64+8 -#define KATANA_PCI_INTB_IRQ_750i 64+9 -#define KATANA_PCI_INTC_IRQ_750i 64+10 -#define KATANA_PCI_INTD_IRQ_750i 64+14 +#define KATANA_PCI_INTA_IRQ_3750 (64+8) +#define KATANA_PCI_INTB_IRQ_3750 (64+9) +#define KATANA_PCI_INTC_IRQ_3750 (64+10) + +#define KATANA_PCI_INTA_IRQ_750i (64+8) +#define KATANA_PCI_INTB_IRQ_750i (64+9) +#define KATANA_PCI_INTC_IRQ_750i (64+10) +#define KATANA_PCI_INTD_IRQ_750i (64+14) #define KATANA_CPLD_RST_EVENT 0x00000000 #define KATANA_CPLD_RST_CMD 0x00001000 diff --git a/arch/ppc/platforms/mcpn765.c b/arch/ppc/platforms/mcpn765.c deleted file mode 100644 index e88d294ea593..000000000000 --- a/arch/ppc/platforms/mcpn765.c +++ /dev/null @@ -1,527 +0,0 @@ -/* - * arch/ppc/platforms/mcpn765.c - * - * Board setup routines for the Motorola MCG MCPN765 cPCI Board. - * - * Author: Mark A. Greer - * mgreer@mvista.com - * - * Modified by Randy Vinson (rvinson@mvista.com) - * - * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -/* - * This file adds support for the Motorola MCG MCPN765. - */ -#include <linux/config.h> -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/initrd.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/serial.h> -#include <linux/tty.h> /* for linux/serial_core.h */ -#include <linux/serial_core.h> -#include <linux/slab.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/time.h> -#include <asm/dma.h> -#include <asm/byteorder.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/prom.h> -#include <asm/smp.h> -#include <asm/open_pic.h> -#include <asm/i8259.h> -#include <asm/todc.h> -#include <asm/pci-bridge.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/bootinfo.h> -#include <asm/hawk.h> -#include <asm/kgdb.h> - -#include "mcpn765.h" - -static u_char mcpn765_openpic_initsenses[] __initdata = { - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE),/* 16: i8259 cascade */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 17: COM1,2,3,4 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 18: Enet 1 (front) */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 19: HAWK WDT XXXX */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 20: 21554 bridge */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 21: cPCI INTA# */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 22: cPCI INTB# */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 23: cPCI INTC# */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 24: cPCI INTD# */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 25: PMC1 INTA#,PMC2 INTB#*/ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 26: PMC1 INTB#,PMC2 INTC#*/ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 27: PMC1 INTC#,PMC2 INTD#*/ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 28: PMC1 INTD#,PMC2 INTA#*/ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 29: Enet 2 (J3) */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 30: Abort Switch */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 31: RTC Alarm */ -}; - -extern void mcpn765_set_VIA_IDE_native(void); - -extern u_int openpic_irq(void); -extern char cmd_line[]; - -extern void gen550_progress(char *, unsigned short); -extern void gen550_init(int, struct uart_port *); - -int use_of_interrupt_tree = 0; - -static void mcpn765_halt(void); - -TODC_ALLOC(); - -/* - * Motorola MCG MCPN765 interrupt routing. - */ -static inline int -mcpn765_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - { 14, 0, 0, 0 }, /* IDSEL 11 - have to manually set */ - { 0, 0, 0, 0 }, /* IDSEL 12 - unused */ - { 0, 0, 0, 0 }, /* IDSEL 13 - unused */ - { 18, 0, 0, 0 }, /* IDSEL 14 - Enet 0 */ - { 0, 0, 0, 0 }, /* IDSEL 15 - unused */ - { 25, 26, 27, 28 }, /* IDSEL 16 - PMC Slot 1 */ - { 28, 25, 26, 27 }, /* IDSEL 17 - PMC Slot 2 */ - { 0, 0, 0, 0 }, /* IDSEL 18 - PMC 2B Connector XXXX */ - { 29, 0, 0, 0 }, /* IDSEL 19 - Enet 1 */ - { 20, 0, 0, 0 }, /* IDSEL 20 - 21554 cPCI bridge */ - }; - - const long min_idsel = 11, max_idsel = 20, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -void __init -mcpn765_set_VIA_IDE_legacy(void) -{ - unsigned short vend, dev; - - early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend); - early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev); - - if ((vend == PCI_VENDOR_ID_VIA) && - (dev == PCI_DEVICE_ID_VIA_82C586_1)) { - - unsigned char temp; - - /* put back original "standard" port base addresses */ - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_0, 0x1f1); - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_1, 0x3f5); - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_2, 0x171); - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_3, 0x375); - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_4, 0xcc01); - - /* put into legacy mode */ - early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, - &temp); - temp &= ~0x05; - early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, - temp); - } -} - -void -mcpn765_set_VIA_IDE_native(void) -{ - unsigned short vend, dev; - - early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend); - early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev); - - if ((vend == PCI_VENDOR_ID_VIA) && - (dev == PCI_DEVICE_ID_VIA_82C586_1)) { - - unsigned char temp; - - /* put into native mode */ - early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, - &temp); - temp |= 0x05; - early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, - temp); - } -} - -/* - * Initialize the VIA 82c586b. - */ -static void __init -mcpn765_setup_via_82c586b(void) -{ - struct pci_dev *dev; - u_char c; - - if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_82C586_0, - NULL)) == NULL) { - printk("No VIA ISA bridge found\n"); - mcpn765_halt(); - /* NOTREACHED */ - } - - /* - * If the firmware left the EISA 4d0/4d1 ports enabled, make sure - * IRQ 14 is set for edge. - */ - pci_read_config_byte(dev, 0x47, &c); - - if (c & (1<<5)) { - c = inb(0x4d1); - c &= ~(1<<6); - outb(c, 0x4d1); - } - - /* Disable PNP IRQ routing since we use the Hawk's MPIC */ - pci_write_config_dword(dev, 0x54, 0); - pci_write_config_byte(dev, 0x58, 0); - - pci_dev_put(dev); - if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_82C586_1, - NULL)) == NULL) { - printk("No VIA ISA bridge found\n"); - mcpn765_halt(); - /* NOTREACHED */ - } - - /* - * PPCBug doesn't set the enable bits for the IDE device. - * Turn them on now. - */ - pci_read_config_byte(dev, 0x40, &c); - c |= 0x03; - pci_write_config_byte(dev, 0x40, c); - pci_dev_put(dev); - - return; -} - -void __init -mcpn765_pcibios_fixup(void) -{ - /* Do MCPN765 board specific initialization. */ - mcpn765_setup_via_82c586b(); -} - -void __init -mcpn765_find_bridges(void) -{ - struct pci_controller *hose; - - hose = pcibios_alloc_controller(); - - if (!hose) - return; - - hose->first_busno = 0; - hose->last_busno = 0xff; - hose->pci_mem_offset = MCPN765_PCI_PHY_MEM_OFFSET; - - pci_init_resource(&hose->io_resource, - MCPN765_PCI_IO_START, - MCPN765_PCI_IO_END, - IORESOURCE_IO, - "PCI host bridge"); - - pci_init_resource(&hose->mem_resources[0], - MCPN765_PCI_MEM_START, - MCPN765_PCI_MEM_END, - IORESOURCE_MEM, - "PCI host bridge"); - - hose->io_space.start = MCPN765_PCI_IO_START; - hose->io_space.end = MCPN765_PCI_IO_END; - hose->mem_space.start = MCPN765_PCI_MEM_START; - hose->mem_space.end = MCPN765_PCI_MEM_END - HAWK_MPIC_SIZE; - - if (hawk_init(hose, - MCPN765_HAWK_PPC_REG_BASE, - MCPN765_PROC_PCI_MEM_START, - MCPN765_PROC_PCI_MEM_END - HAWK_MPIC_SIZE, - MCPN765_PROC_PCI_IO_START, - MCPN765_PROC_PCI_IO_END, - MCPN765_PCI_MEM_END - HAWK_MPIC_SIZE + 1) != 0) { - printk("Could not initialize HAWK bridge\n"); - } - - /* VIA IDE BAR decoders are only 16-bits wide. PCI Auto Config - * will reassign the bars outside of 16-bit I/O space, which will - * "break" things. To prevent this, we'll set the IDE chip into - * legacy mode and seed the bars with their legacy addresses (in 16-bit - * I/O space). The Auto Config code will skip the IDE contoller in - * legacy mode, so our bar values will stick. - */ - mcpn765_set_VIA_IDE_legacy(); - - hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); - - /* Now that we've got 16-bit addresses in the bars, we can switch the - * IDE controller back into native mode so we can do "modern" resource - * and interrupt management. - */ - mcpn765_set_VIA_IDE_native(); - - ppc_md.pcibios_fixup = mcpn765_pcibios_fixup; - ppc_md.pcibios_fixup_bus = NULL; - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mcpn765_map_irq; - - return; -} -static void __init -mcpn765_setup_arch(void) -{ - struct pci_controller *hose; - - if ( ppc_md.progress ) - ppc_md.progress("mcpn765_setup_arch: enter", 0); - - loops_per_jiffy = 50000000 / HZ; - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_SDA2; -#endif - - if ( ppc_md.progress ) - ppc_md.progress("mcpn765_setup_arch: find_bridges", 0); - - /* Lookup PCI host bridges */ - mcpn765_find_bridges(); - - hose = pci_bus_to_hose(0); - isa_io_base = (ulong)hose->io_base_virt; - - TODC_INIT(TODC_TYPE_MK48T37, - (MCPN765_PHYS_NVRAM_AS0 - isa_io_base), - (MCPN765_PHYS_NVRAM_AS1 - isa_io_base), - (MCPN765_PHYS_NVRAM_DATA - isa_io_base), - 8); - - OpenPIC_InitSenses = mcpn765_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof(mcpn765_openpic_initsenses); - - printk("Motorola MCG MCPN765 cPCI Non-System Board\n"); - printk("MCPN765 port (MontaVista Software, Inc. (source@mvista.com))\n"); - - if ( ppc_md.progress ) - ppc_md.progress("mcpn765_setup_arch: exit", 0); - - return; -} - -static void __init -mcpn765_init2(void) -{ - - request_region(0x00,0x20,"dma1"); - request_region(0x20,0x20,"pic1"); - request_region(0x40,0x20,"timer"); - request_region(0x80,0x10,"dma page reg"); - request_region(0xa0,0x20,"pic2"); - request_region(0xc0,0x20,"dma2"); - - return; -} - -/* - * Interrupt setup and service. - * Have MPIC on HAWK and cascaded 8259s on VIA 82586 cascaded to MPIC. - */ -static void __init -mcpn765_init_IRQ(void) -{ - int i; - - if ( ppc_md.progress ) - ppc_md.progress("init_irq: enter", 0); - - openpic_init(NUM_8259_INTERRUPTS); - openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade", - i8259_irq); - - for(i=0; i < NUM_8259_INTERRUPTS; i++) - irq_desc[i].handler = &i8259_pic; - - i8259_init(0); - - if ( ppc_md.progress ) - ppc_md.progress("init_irq: exit", 0); - - return; -} - -static u32 -mcpn765_irq_canonicalize(u32 irq) -{ - if (irq == 2) - return 9; - else - return irq; -} - -static unsigned long __init -mcpn765_find_end_of_memory(void) -{ - return hawk_get_mem_size(MCPN765_HAWK_SMC_BASE); -} - -static void __init -mcpn765_map_io(void) -{ - io_block_mapping(0xfe800000, 0xfe800000, 0x00800000, _PAGE_IO); -} - -static void -mcpn765_reset_board(void) -{ - local_irq_disable(); - - /* set VIA IDE controller into native mode */ - mcpn765_set_VIA_IDE_native(); - - /* Set exception prefix high - to the firmware */ - _nmask_and_or_msr(0, MSR_IP); - - out_8((u_char *)MCPN765_BOARD_MODRST_REG, 0x01); - - return; -} - -static void -mcpn765_restart(char *cmd) -{ - volatile ulong i = 10000000; - - mcpn765_reset_board(); - - while (i-- > 0); - panic("restart failed\n"); -} - -static void -mcpn765_power_off(void) -{ - mcpn765_halt(); - /* NOTREACHED */ -} - -static void -mcpn765_halt(void) -{ - local_irq_disable(); - while (1); - /* NOTREACHED */ -} - -static int -mcpn765_show_cpuinfo(struct seq_file *m) -{ - seq_printf(m, "vendor\t\t: Motorola MCG\n"); - seq_printf(m, "machine\t\t: MCPN765\n"); - - return 0; -} - -/* - * Set BAT 3 to map 0xf0000000 to end of physical memory space. - */ -static __inline__ void -mcpn765_set_bat(void) -{ - mb(); - mtspr(SPRN_DBAT1U, 0xfe8000fe); - mtspr(SPRN_DBAT1L, 0xfe80002a); - mb(); -} - -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - parse_bootinfo(find_bootinfo()); - - /* Map in board regs, etc. */ - mcpn765_set_bat(); - - isa_mem_base = MCPN765_ISA_MEM_BASE; - pci_dram_offset = MCPN765_PCI_DRAM_OFFSET; - ISA_DMA_THRESHOLD = 0x00ffffff; - DMA_MODE_READ = 0x44; - DMA_MODE_WRITE = 0x48; - - ppc_md.setup_arch = mcpn765_setup_arch; - ppc_md.show_cpuinfo = mcpn765_show_cpuinfo; - ppc_md.irq_canonicalize = mcpn765_irq_canonicalize; - ppc_md.init_IRQ = mcpn765_init_IRQ; - ppc_md.get_irq = openpic_get_irq; - ppc_md.init = mcpn765_init2; - - ppc_md.restart = mcpn765_restart; - ppc_md.power_off = mcpn765_power_off; - ppc_md.halt = mcpn765_halt; - - ppc_md.find_end_of_memory = mcpn765_find_end_of_memory; - ppc_md.setup_io_mappings = mcpn765_map_io; - - ppc_md.time_init = todc_time_init; - ppc_md.set_rtc_time = todc_set_rtc_time; - ppc_md.get_rtc_time = todc_get_rtc_time; - ppc_md.calibrate_decr = todc_calibrate_decr; - - ppc_md.nvram_read_val = todc_m48txx_read_val; - ppc_md.nvram_write_val = todc_m48txx_write_val; - - ppc_md.heartbeat = NULL; - ppc_md.heartbeat_reset = 0; - ppc_md.heartbeat_count = 0; - -#ifdef CONFIG_SERIAL_TEXT_DEBUG - ppc_md.progress = gen550_progress; -#endif -#ifdef CONFIG_KGDB - ppc_md.kgdb_map_scc = gen550_kgdb_map_scc; -#endif - - return; -} diff --git a/arch/ppc/platforms/mcpn765.h b/arch/ppc/platforms/mcpn765.h deleted file mode 100644 index 4d35ecad097b..000000000000 --- a/arch/ppc/platforms/mcpn765.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * arch/ppc/platforms/mcpn765.h - * - * Definitions for Motorola MCG MCPN765 cPCI Board. - * - * Author: Mark A. Greer - * mgreer@mvista.com - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -/* - * From Processor to PCI: - * PCI Mem Space: 0x80000000 - 0xc0000000 -> 0x80000000 - 0xc0000000 (1 GB) - * PCI I/O Space: 0xfd800000 - 0xfe000000 -> 0x00000000 - 0x00800000 (8 MB) - * Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area - * MPIC in PCI Mem Space: 0xfe800000 - 0xfe830000 (not all used by MPIC) - * - * From PCI to Processor: - * System Memory: 0x00000000 -> 0x00000000 - */ - -#ifndef __PPC_PLATFORMS_MCPN765_H -#define __PPC_PLATFORMS_MCPN765_H -#include <linux/config.h> - -/* PCI Memory space mapping info */ -#define MCPN765_PCI_MEM_SIZE 0x40000000U -#define MCPN765_PROC_PCI_MEM_START 0x80000000U -#define MCPN765_PROC_PCI_MEM_END (MCPN765_PROC_PCI_MEM_START + \ - MCPN765_PCI_MEM_SIZE - 1) -#define MCPN765_PCI_MEM_START 0x80000000U -#define MCPN765_PCI_MEM_END (MCPN765_PCI_MEM_START + \ - MCPN765_PCI_MEM_SIZE - 1) - -/* PCI I/O space mapping info */ -#define MCPN765_PCI_IO_SIZE 0x00800000U -#define MCPN765_PROC_PCI_IO_START 0xfd800000U -#define MCPN765_PROC_PCI_IO_END (MCPN765_PROC_PCI_IO_START + \ - MCPN765_PCI_IO_SIZE - 1) -#define MCPN765_PCI_IO_START 0x00000000U -#define MCPN765_PCI_IO_END (MCPN765_PCI_IO_START + \ - MCPN765_PCI_IO_SIZE - 1) - -/* System memory mapping info */ -#define MCPN765_PCI_DRAM_OFFSET 0x00000000U -#define MCPN765_PCI_PHY_MEM_OFFSET 0x00000000U - -#define MCPN765_ISA_MEM_BASE 0x00000000U -#define MCPN765_ISA_IO_BASE MCPN765_PROC_PCI_IO_START - -/* Define base addresses for important sets of registers */ -#define MCPN765_HAWK_MPIC_BASE 0xfe800000U -#define MCPN765_HAWK_SMC_BASE 0xfef80000U -#define MCPN765_HAWK_PPC_REG_BASE 0xfeff0000U - -/* Define MCPN765 board register addresses. */ -#define MCPN765_BOARD_STATUS_REG 0xfef88080U -#define MCPN765_BOARD_MODFAIL_REG 0xfef88090U -#define MCPN765_BOARD_MODRST_REG 0xfef880a0U -#define MCPN765_BOARD_TBEN_REG 0xfef880c0U -#define MCPN765_BOARD_GEOGRAPHICAL_REG 0xfef880e8U -#define MCPN765_BOARD_EXT_FEATURE_REG 0xfef880f0U -#define MCPN765_BOARD_LAST_RESET_REG 0xfef880f8U - -/* Defines for UART */ - -/* Define the UART base addresses */ -#define MCPN765_SERIAL_1 0xfef88000 -#define MCPN765_SERIAL_2 0xfef88200 -#define MCPN765_SERIAL_3 0xfef88400 -#define MCPN765_SERIAL_4 0xfef88600 - -#ifdef CONFIG_SERIAL_MANY_PORTS -#define RS_TABLE_SIZE 64 -#else -#define RS_TABLE_SIZE 4 -#endif - -/* Rate for the 1.8432 Mhz clock for the onboard serial chip */ -#define BASE_BAUD ( 1843200 / 16 ) -#define UART_CLK 1843200 - -#ifdef CONFIG_SERIAL_DETECT_IRQ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ) -#else -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST) -#endif - -/* All UART IRQ's are wire-OR'd to IRQ 17 */ -#define STD_SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, MCPN765_SERIAL_1, 17, STD_COM_FLAGS, /* ttyS0 */\ - iomem_base: (u8 *)MCPN765_SERIAL_1, \ - iomem_reg_shift: 4, \ - io_type: SERIAL_IO_MEM }, \ - { 0, BASE_BAUD, MCPN765_SERIAL_2, 17, STD_COM_FLAGS, /* ttyS1 */\ - iomem_base: (u8 *)MCPN765_SERIAL_2, \ - iomem_reg_shift: 4, \ - io_type: SERIAL_IO_MEM }, \ - { 0, BASE_BAUD, MCPN765_SERIAL_3, 17, STD_COM_FLAGS, /* ttyS2 */\ - iomem_base: (u8 *)MCPN765_SERIAL_3, \ - iomem_reg_shift: 4, \ - io_type: SERIAL_IO_MEM }, \ - { 0, BASE_BAUD, MCPN765_SERIAL_4, 17, STD_COM_FLAGS, /* ttyS3 */\ - iomem_base: (u8 *)MCPN765_SERIAL_4, \ - iomem_reg_shift: 4, \ - io_type: SERIAL_IO_MEM }, - -#define SERIAL_PORT_DFNS \ - STD_SERIAL_PORT_DFNS - -/* Define the NVRAM/RTC address strobe & data registers */ -#define MCPN765_PHYS_NVRAM_AS0 0xfef880c8U -#define MCPN765_PHYS_NVRAM_AS1 0xfef880d0U -#define MCPN765_PHYS_NVRAM_DATA 0xfef880d8U - -extern void mcpn765_find_bridges(void); - -#endif /* __PPC_PLATFORMS_MCPN765_H */ diff --git a/arch/ppc/platforms/pcore.c b/arch/ppc/platforms/pcore.c deleted file mode 100644 index d7191630a650..000000000000 --- a/arch/ppc/platforms/pcore.c +++ /dev/null @@ -1,352 +0,0 @@ -/* - * arch/ppc/platforms/pcore_setup.c - * - * Setup routines for Force PCORE boards - * - * Author: Matt Porter <mporter@mvista.com> - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/config.h> -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/types.h> -#include <linux/major.h> -#include <linux/initrd.h> -#include <linux/console.h> -#include <linux/irq.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> - -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/time.h> -#include <asm/i8259.h> -#include <asm/mpc10x.h> -#include <asm/todc.h> -#include <asm/bootinfo.h> -#include <asm/kgdb.h> - -#include "pcore.h" - -extern unsigned long loops_per_jiffy; - -static int board_type; - -static inline int __init -pcore_6750_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {9, 10, 11, 12}, /* IDSEL 24 - DEC 21554 */ - {10, 0, 0, 0}, /* IDSEL 25 - DEC 21143 */ - {11, 12, 9, 10}, /* IDSEL 26 - PMC I */ - {12, 9, 10, 11}, /* IDSEL 27 - PMC II */ - {0, 0, 0, 0}, /* IDSEL 28 - unused */ - {0, 0, 9, 0}, /* IDSEL 29 - unused */ - {0, 0, 0, 0}, /* IDSEL 30 - Winbond */ - }; - const long min_idsel = 24, max_idsel = 30, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -}; - -static inline int __init -pcore_680_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {9, 10, 11, 12}, /* IDSEL 24 - Sentinel */ - {10, 0, 0, 0}, /* IDSEL 25 - i82559 #1 */ - {11, 12, 9, 10}, /* IDSEL 26 - PMC I */ - {12, 9, 10, 11}, /* IDSEL 27 - PMC II */ - {9, 0, 0, 0}, /* IDSEL 28 - i82559 #2 */ - {0, 0, 0, 0}, /* IDSEL 29 - unused */ - {0, 0, 0, 0}, /* IDSEL 30 - Winbond */ - }; - const long min_idsel = 24, max_idsel = 30, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -}; - -void __init -pcore_pcibios_fixup(void) -{ - struct pci_dev *dev; - - if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND, - PCI_DEVICE_ID_WINBOND_83C553, - 0))) - { - /* Reroute interrupts both IDE channels to 15 */ - pci_write_config_byte(dev, - PCORE_WINBOND_IDE_INT, - 0xff); - - /* Route INTA-D to IRQ9-12, respectively */ - pci_write_config_word(dev, - PCORE_WINBOND_PCI_INT, - 0x9abc); - - /* - * Set up 8259 edge/level triggering - */ - outb(0x00, PCORE_WINBOND_PRI_EDG_LVL); - outb(0x1e, PCORE_WINBOND_SEC_EDG_LVL); - pci_dev_put(dev); - } -} - -int __init -pcore_find_bridges(void) -{ - struct pci_controller* hose; - int host_bridge, board_type; - - hose = pcibios_alloc_controller(); - if (!hose) - return 0; - - mpc10x_bridge_init(hose, - MPC10X_MEM_MAP_B, - MPC10X_MEM_MAP_B, - MPC10X_MAPB_EUMB_BASE); - - /* Determine board type */ - early_read_config_dword(hose, - 0, - PCI_DEVFN(0,0), - PCI_VENDOR_ID, - &host_bridge); - if (host_bridge == MPC10X_BRIDGE_106) - board_type = PCORE_TYPE_6750; - else /* MPC10X_BRIDGE_107 */ - board_type = PCORE_TYPE_680; - - hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); - - ppc_md.pcibios_fixup = pcore_pcibios_fixup; - ppc_md.pci_swizzle = common_swizzle; - - if (board_type == PCORE_TYPE_6750) - ppc_md.pci_map_irq = pcore_6750_map_irq; - else /* PCORE_TYPE_680 */ - ppc_md.pci_map_irq = pcore_680_map_irq; - - return board_type; -} - -/* Dummy variable to satisfy mpc10x_common.o */ -void *OpenPIC_Addr; - -static int -pcore_show_cpuinfo(struct seq_file *m) -{ - seq_printf(m, "vendor\t\t: Force Computers\n"); - - if (board_type == PCORE_TYPE_6750) - seq_printf(m, "machine\t\t: PowerCore 6750\n"); - else /* PCORE_TYPE_680 */ - seq_printf(m, "machine\t\t: PowerCore 680\n"); - - seq_printf(m, "L2\t\t: " ); - if (board_type == PCORE_TYPE_6750) - switch (readb(PCORE_DCCR_REG) & PCORE_DCCR_L2_MASK) - { - case PCORE_DCCR_L2_0KB: - seq_printf(m, "nocache"); - break; - case PCORE_DCCR_L2_256KB: - seq_printf(m, "256KB"); - break; - case PCORE_DCCR_L2_1MB: - seq_printf(m, "1MB"); - break; - case PCORE_DCCR_L2_512KB: - seq_printf(m, "512KB"); - break; - default: - seq_printf(m, "error"); - break; - } - else /* PCORE_TYPE_680 */ - switch (readb(PCORE_DCCR_REG) & PCORE_DCCR_L2_MASK) - { - case PCORE_DCCR_L2_2MB: - seq_printf(m, "2MB"); - break; - case PCORE_DCCR_L2_256KB: - seq_printf(m, "reserved"); - break; - case PCORE_DCCR_L2_1MB: - seq_printf(m, "1MB"); - break; - case PCORE_DCCR_L2_512KB: - seq_printf(m, "512KB"); - break; - default: - seq_printf(m, "error"); - break; - } - - seq_printf(m, "\n"); - - return 0; -} - -static void __init -pcore_setup_arch(void) -{ - /* init to some ~sane value until calibrate_delay() runs */ - loops_per_jiffy = 50000000/HZ; - - /* Lookup PCI host bridges */ - board_type = pcore_find_bridges(); - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_SDA2; -#endif - - printk(KERN_INFO "Force PowerCore "); - if (board_type == PCORE_TYPE_6750) - printk("6750\n"); - else - printk("680\n"); - printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n"); - _set_L2CR(L2CR_L2E | _get_L2CR()); - -} - -static void -pcore_restart(char *cmd) -{ - local_irq_disable(); - /* Hard reset */ - writeb(0x11, 0xfe000332); - while(1); -} - -static void -pcore_halt(void) -{ - local_irq_disable(); - /* Turn off user LEDs */ - writeb(0x00, 0xfe000300); - while (1); -} - -static void -pcore_power_off(void) -{ - pcore_halt(); -} - - -static void __init -pcore_init_IRQ(void) -{ - int i; - - for ( i = 0 ; i < 16 ; i++ ) - irq_desc[i].handler = &i8259_pic; - - i8259_init(0); -} - -/* - * Set BAT 3 to map 0xf0000000 to end of physical memory space. - */ -static __inline__ void -pcore_set_bat(void) -{ - mb(); - mtspr(SPRN_DBAT3U, 0xf0001ffe); - mtspr(SPRN_DBAT3L, 0xfe80002a); - mb(); - -} - -static unsigned long __init -pcore_find_end_of_memory(void) -{ - - return mpc10x_get_mem_size(MPC10X_MEM_MAP_B); -} - -static void __init -pcore_map_io(void) -{ - io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO); -} - -TODC_ALLOC(); - -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - parse_bootinfo(find_bootinfo()); - - /* Cover I/O space with a BAT */ - /* yuck, better hope your ram size is a power of 2 -- paulus */ - pcore_set_bat(); - - isa_io_base = MPC10X_MAPB_ISA_IO_BASE; - isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE; - pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET; - - ppc_md.setup_arch = pcore_setup_arch; - ppc_md.show_cpuinfo = pcore_show_cpuinfo; - ppc_md.init_IRQ = pcore_init_IRQ; - ppc_md.get_irq = i8259_irq; - - ppc_md.find_end_of_memory = pcore_find_end_of_memory; - ppc_md.setup_io_mappings = pcore_map_io; - - ppc_md.restart = pcore_restart; - ppc_md.power_off = pcore_power_off; - ppc_md.halt = pcore_halt; - - TODC_INIT(TODC_TYPE_MK48T59, - PCORE_NVRAM_AS0, - PCORE_NVRAM_AS1, - PCORE_NVRAM_DATA, - 8); - - ppc_md.time_init = todc_time_init; - ppc_md.get_rtc_time = todc_get_rtc_time; - ppc_md.set_rtc_time = todc_set_rtc_time; - ppc_md.calibrate_decr = todc_calibrate_decr; - - ppc_md.nvram_read_val = todc_m48txx_read_val; - ppc_md.nvram_write_val = todc_m48txx_write_val; - -#ifdef CONFIG_SERIAL_TEXT_DEBUG - ppc_md.progress = gen550_progress; -#endif -#ifdef CONFIG_KGDB - ppc_md.kgdb_map_scc = gen550_kgdb_map_scc; -#endif -} diff --git a/arch/ppc/platforms/pcore.h b/arch/ppc/platforms/pcore.h deleted file mode 100644 index c6a26e764926..000000000000 --- a/arch/ppc/platforms/pcore.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * arch/ppc/platforms/pcore.h - * - * Definitions for Force PowerCore board support - * - * Author: Matt Porter <mporter@mvista.com> - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __PPC_PLATFORMS_PCORE_H -#define __PPC_PLATFORMS_PCORE_H - -#include <asm/mpc10x.h> - -#define PCORE_TYPE_6750 1 -#define PCORE_TYPE_680 2 - -#define PCORE_NVRAM_AS0 0x73 -#define PCORE_NVRAM_AS1 0x75 -#define PCORE_NVRAM_DATA 0x77 - -#define PCORE_DCCR_REG (MPC10X_MAPB_ISA_IO_BASE + 0x308) -#define PCORE_DCCR_L2_MASK 0xc0 -#define PCORE_DCCR_L2_0KB 0x00 -#define PCORE_DCCR_L2_256KB 0x40 -#define PCORE_DCCR_L2_512KB 0xc0 -#define PCORE_DCCR_L2_1MB 0x80 -#define PCORE_DCCR_L2_2MB 0x00 - -#define PCORE_WINBOND_IDE_INT 0x43 -#define PCORE_WINBOND_PCI_INT 0x44 -#define PCORE_WINBOND_PRI_EDG_LVL 0x4d0 -#define PCORE_WINBOND_SEC_EDG_LVL 0x4d1 - -#endif /* __PPC_PLATFORMS_PCORE_H */ diff --git a/arch/ppc/platforms/pmac_pic.c b/arch/ppc/platforms/pmac_pic.c index 9f92e1bb7f34..2ce058895e03 100644 --- a/arch/ppc/platforms/pmac_pic.c +++ b/arch/ppc/platforms/pmac_pic.c @@ -619,7 +619,7 @@ not_found: return viaint; } -static int pmacpic_suspend(struct sys_device *sysdev, u32 state) +static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state) { int viaint = pmacpic_find_viaint(); diff --git a/arch/ppc/platforms/pmac_sleep.S b/arch/ppc/platforms/pmac_sleep.S index 016a74649155..88419c77ac43 100644 --- a/arch/ppc/platforms/pmac_sleep.S +++ b/arch/ppc/platforms/pmac_sleep.S @@ -17,7 +17,7 @@ #include <asm/cputable.h> #include <asm/cache.h> #include <asm/thread_info.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #define MAGIC 0x4c617273 /* 'Lars' */ @@ -161,6 +161,8 @@ _GLOBAL(low_sleep_handler) addi r3,r3,sleep_storage@l stw r5,0(r3) + .globl low_cpu_die +low_cpu_die: /* Flush & disable all caches */ bl flush_disable_caches diff --git a/arch/ppc/platforms/pmac_smp.c b/arch/ppc/platforms/pmac_smp.c index 8e049dab4e63..794a23994b82 100644 --- a/arch/ppc/platforms/pmac_smp.c +++ b/arch/ppc/platforms/pmac_smp.c @@ -33,6 +33,7 @@ #include <linux/spinlock.h> #include <linux/errno.h> #include <linux/hardirq.h> +#include <linux/cpu.h> #include <asm/ptrace.h> #include <asm/atomic.h> @@ -55,9 +56,7 @@ * Powersurge (old powermac SMP) support. */ -extern void __secondary_start_psurge(void); -extern void __secondary_start_psurge2(void); /* Temporary horrible hack */ -extern void __secondary_start_psurge3(void); /* Temporary horrible hack */ +extern void __secondary_start_pmac_0(void); /* Addresses for powersurge registers */ #define HAMMERHEAD_BASE 0xf8000000 @@ -119,7 +118,7 @@ static volatile int sec_tb_reset = 0; static unsigned int pri_tb_hi, pri_tb_lo; static unsigned int pri_tb_stamp; -static void __init core99_init_caches(int cpu) +static void __devinit core99_init_caches(int cpu) { if (!cpu_has_feature(CPU_FTR_L2CR)) return; @@ -346,7 +345,7 @@ static int __init smp_psurge_probe(void) static void __init smp_psurge_kick_cpu(int nr) { - void (*start)(void) = __secondary_start_psurge; + unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8; unsigned long a; /* may need to flush here if secondary bats aren't setup */ @@ -356,17 +355,7 @@ static void __init smp_psurge_kick_cpu(int nr) if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353); - /* setup entry point of secondary processor */ - switch (nr) { - case 2: - start = __secondary_start_psurge2; - break; - case 3: - start = __secondary_start_psurge3; - break; - } - - out_be32(psurge_start, __pa(start)); + out_be32(psurge_start, start); mb(); psurge_set_ipi(nr); @@ -500,14 +489,14 @@ static int __init smp_core99_probe(void) return ncpus; } -static void __init smp_core99_kick_cpu(int nr) +static void __devinit smp_core99_kick_cpu(int nr) { unsigned long save_vector, new_vector; unsigned long flags; volatile unsigned long *vector = ((volatile unsigned long *)(KERNELBASE+0x100)); - if (nr < 1 || nr > 3) + if (nr < 0 || nr > 3) return; if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346); @@ -518,19 +507,9 @@ static void __init smp_core99_kick_cpu(int nr) save_vector = *vector; /* Setup fake reset vector that does - * b __secondary_start_psurge - KERNELBASE + * b __secondary_start_pmac_0 + nr*8 - KERNELBASE */ - switch(nr) { - case 1: - new_vector = (unsigned long)__secondary_start_psurge; - break; - case 2: - new_vector = (unsigned long)__secondary_start_psurge2; - break; - case 3: - new_vector = (unsigned long)__secondary_start_psurge3; - break; - } + new_vector = (unsigned long) __secondary_start_pmac_0 + nr * 8; *vector = 0x48000002 + new_vector - KERNELBASE; /* flush data cache and inval instruction cache */ @@ -554,7 +533,7 @@ static void __init smp_core99_kick_cpu(int nr) if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347); } -static void __init smp_core99_setup_cpu(int cpu_nr) +static void __devinit smp_core99_setup_cpu(int cpu_nr) { /* Setup L2/L3 */ if (cpu_nr != 0) @@ -668,3 +647,47 @@ struct smp_ops_t core99_smp_ops __pmacdata = { .give_timebase = smp_core99_give_timebase, .take_timebase = smp_core99_take_timebase, }; + +#ifdef CONFIG_HOTPLUG_CPU + +int __cpu_disable(void) +{ + cpu_clear(smp_processor_id(), cpu_online_map); + + /* XXX reset cpu affinity here */ + openpic_set_priority(0xf); + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + mb(); + udelay(20); + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + return 0; +} + +extern void low_cpu_die(void) __attribute__((noreturn)); /* in pmac_sleep.S */ +static int cpu_dead[NR_CPUS]; + +void cpu_die(void) +{ + local_irq_disable(); + cpu_dead[smp_processor_id()] = 1; + mb(); + low_cpu_die(); +} + +void __cpu_die(unsigned int cpu) +{ + int timeout; + + timeout = 1000; + while (!cpu_dead[cpu]) { + if (--timeout == 0) { + printk("CPU %u refused to die!\n", cpu); + break; + } + msleep(1); + } + cpu_callin_map[cpu] = 0; + cpu_dead[cpu] = 0; +} + +#endif diff --git a/arch/ppc/platforms/spd8xx.h b/arch/ppc/platforms/spd8xx.h deleted file mode 100644 index ed48d144f415..000000000000 --- a/arch/ppc/platforms/spd8xx.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Speech Design SPD8xxTS board specific definitions - * - * Copyright (c) 2000,2001 Wolfgang Denk (wd@denx.de) - */ - -#ifdef __KERNEL__ -#ifndef __ASM_SPD8XX_H__ -#define __ASM_SPD8XX_H__ - -#include <linux/config.h> - -#include <asm/ppcboot.h> - -#ifndef __ASSEMBLY__ -#define SPD_IMMR_BASE 0xFFF00000 /* phys. addr of IMMR */ -#define SPD_IMAP_SIZE (64 * 1024) /* size of mapped area */ - -#define IMAP_ADDR SPD_IMMR_BASE /* physical base address of IMMR area */ -#define IMAP_SIZE SPD_IMAP_SIZE /* mapped size of IMMR area */ - -#define PCMCIA_MEM_ADDR ((uint)0xFE100000) -#define PCMCIA_MEM_SIZE ((uint)(64 * 1024)) - -#define IDE0_INTERRUPT 10 /* = IRQ5 */ -#define IDE1_INTERRUPT 12 /* = IRQ6 */ -#define CPM_INTERRUPT 13 /* = SIU_LEVEL6 (was: SIU_LEVEL2) */ - -/* override the default number of IDE hardware interfaces */ -#define MAX_HWIFS 2 - -/* - * Definitions for IDE0 Interface - */ -#define IDE0_BASE_OFFSET 0x0000 /* Offset in PCMCIA memory */ -#define IDE0_DATA_REG_OFFSET 0x0000 -#define IDE0_ERROR_REG_OFFSET 0x0081 -#define IDE0_NSECTOR_REG_OFFSET 0x0082 -#define IDE0_SECTOR_REG_OFFSET 0x0083 -#define IDE0_LCYL_REG_OFFSET 0x0084 -#define IDE0_HCYL_REG_OFFSET 0x0085 -#define IDE0_SELECT_REG_OFFSET 0x0086 -#define IDE0_STATUS_REG_OFFSET 0x0087 -#define IDE0_CONTROL_REG_OFFSET 0x0106 -#define IDE0_IRQ_REG_OFFSET 0x000A /* not used */ - -/* - * Definitions for IDE1 Interface - */ -#define IDE1_BASE_OFFSET 0x0C00 /* Offset in PCMCIA memory */ -#define IDE1_DATA_REG_OFFSET 0x0000 -#define IDE1_ERROR_REG_OFFSET 0x0081 -#define IDE1_NSECTOR_REG_OFFSET 0x0082 -#define IDE1_SECTOR_REG_OFFSET 0x0083 -#define IDE1_LCYL_REG_OFFSET 0x0084 -#define IDE1_HCYL_REG_OFFSET 0x0085 -#define IDE1_SELECT_REG_OFFSET 0x0086 -#define IDE1_STATUS_REG_OFFSET 0x0087 -#define IDE1_CONTROL_REG_OFFSET 0x0106 -#define IDE1_IRQ_REG_OFFSET 0x000A /* not used */ - -/* CPM Ethernet through SCCx. - * - * Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC2 use. - */ -#define PA_ENET_MDC ((ushort)0x0001) /* PA 15 !!! */ -#define PA_ENET_MDIO ((ushort)0x0002) /* PA 14 !!! */ -#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ -#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ -#define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */ -#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ - -#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ - -#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ -#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ -#define PC_ENET_RESET ((ushort)0x0100) /* PC 7 !!! */ - -/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK2) to - * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. - */ -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00002E00) - -/* We don't use the 8259. -*/ -#define NR_8259_INTS 0 - -#endif /* !__ASSEMBLY__ */ -#endif /* __ASM_SPD8XX_H__ */ -#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/tqm8xx.h b/arch/ppc/platforms/tqm8xx.h index 2150dc87b18f..43ac064ebe5a 100644 --- a/arch/ppc/platforms/tqm8xx.h +++ b/arch/ppc/platforms/tqm8xx.h @@ -147,29 +147,6 @@ static __inline__ void ide_led(int on) #define SICR_ENET_CLKRT ((uint)0x00002600) #endif /* CONFIG_FPS850L */ -/*** SM850 *********************************************************/ - -/* The SM850 Service Module uses SCC2 for IrDA and SCC3 for Ethernet */ - -#ifdef CONFIG_SM850 -#define PB_ENET_RXD ((uint)0x00000004) /* PB 29 */ -#define PB_ENET_TXD ((uint)0x00000002) /* PB 30 */ -#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */ -#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ - -#define PC_ENET_LBK ((ushort)0x0008) /* PC 12 */ -#define PC_ENET_TENA ((ushort)0x0004) /* PC 13 */ - -#define PC_ENET_RENA ((ushort)0x0800) /* PC 4 */ -#define PC_ENET_CLSN ((ushort)0x0400) /* PC 5 */ - -/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to - * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero. - */ -#define SICR_ENET_MASK ((uint)0x00FF0000) -#define SICR_ENET_CLKRT ((uint)0x00260000) -#endif /* CONFIG_SM850 */ - /* We don't use the 8259. */ #define NR_8259_INTS 0 diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 220a65ab0a51..8b9b226005d1 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -43,8 +43,6 @@ obj-$(CONFIG_PPC_PMAC) += open_pic.o indirect_pci.o obj-$(CONFIG_POWER4) += open_pic2.o obj-$(CONFIG_PPC_CHRP) += open_pic.o indirect_pci.o i8259.o obj-$(CONFIG_PPC_PREP) += open_pic.o indirect_pci.o i8259.o todc_time.o -obj-$(CONFIG_ADIR) += i8259.o indirect_pci.o pci_auto.o \ - todc_time.o obj-$(CONFIG_BAMBOO) += indirect_pci.o pci_auto.o todc_time.o obj-$(CONFIG_CPCI690) += todc_time.o pci_auto.o obj-$(CONFIG_EBONY) += indirect_pci.o pci_auto.o todc_time.o @@ -52,16 +50,10 @@ obj-$(CONFIG_EV64260) += todc_time.o pci_auto.o obj-$(CONFIG_CHESTNUT) += mv64360_pic.o pci_auto.o obj-$(CONFIG_GEMINI) += open_pic.o indirect_pci.o obj-$(CONFIG_GT64260) += gt64260_pic.o -obj-$(CONFIG_K2) += i8259.o indirect_pci.o todc_time.o \ - pci_auto.o obj-$(CONFIG_LOPEC) += i8259.o pci_auto.o todc_time.o obj-$(CONFIG_HDPU) += pci_auto.o obj-$(CONFIG_LUAN) += indirect_pci.o pci_auto.o todc_time.o obj-$(CONFIG_KATANA) += pci_auto.o -obj-$(CONFIG_MCPN765) += todc_time.o indirect_pci.o pci_auto.o \ - open_pic.o i8259.o hawk_common.o -obj-$(CONFIG_MENF1) += todc_time.o i8259.o mpc10x_common.o \ - pci_auto.o indirect_pci.o obj-$(CONFIG_MV64360) += mv64360_pic.o obj-$(CONFIG_MV64X60) += mv64x60.o mv64x60_win.o indirect_pci.o obj-$(CONFIG_MVME5100) += open_pic.o todc_time.o indirect_pci.o \ @@ -69,7 +61,6 @@ obj-$(CONFIG_MVME5100) += open_pic.o todc_time.o indirect_pci.o \ obj-$(CONFIG_MVME5100_IPMC761_PRESENT) += i8259.o obj-$(CONFIG_OCOTEA) += indirect_pci.o pci_auto.o todc_time.o obj-$(CONFIG_PAL4) += cpc700_pic.o -obj-$(CONFIG_PCORE) += todc_time.o i8259.o pci_auto.o obj-$(CONFIG_POWERPMC250) += pci_auto.o obj-$(CONFIG_PPLUS) += hawk_common.o open_pic.o i8259.o \ indirect_pci.o todc_time.o pci_auto.o @@ -82,7 +73,8 @@ obj-$(CONFIG_SANDPOINT) += i8259.o pci_auto.o todc_time.o obj-$(CONFIG_SBC82xx) += todc_time.o obj-$(CONFIG_SPRUCE) += cpc700_pic.o indirect_pci.o pci_auto.o \ todc_time.o -obj-$(CONFIG_8260) += m8260_setup.o +obj-$(CONFIG_8260) += m8260_setup.o pq2_devices.o pq2_sys.o \ + ppc_sys.o obj-$(CONFIG_PCI_8260) += m82xx_pci.o indirect_pci.o pci_auto.o obj-$(CONFIG_8260_PCI9) += m8260_pci_erratum9.o obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o diff --git a/arch/ppc/syslib/cpc700_pic.c b/arch/ppc/syslib/cpc700_pic.c index 774709807538..75fe8eb10693 100644 --- a/arch/ppc/syslib/cpc700_pic.c +++ b/arch/ppc/syslib/cpc700_pic.c @@ -90,14 +90,10 @@ cpc700_mask_and_ack_irq(unsigned int irq) } static struct hw_interrupt_type cpc700_pic = { - "CPC700 PIC", - NULL, - NULL, - cpc700_unmask_irq, - cpc700_mask_irq, - cpc700_mask_and_ack_irq, - NULL, - NULL + .typename = "CPC700 PIC", + .enable = cpc700_unmask_irq, + .disable = cpc700_mask_irq, + .ack = cpc700_mask_and_ack_irq, }; __init static void diff --git a/arch/ppc/syslib/i8259.c b/arch/ppc/syslib/i8259.c index b9391e650141..5c7908c20e43 100644 --- a/arch/ppc/syslib/i8259.c +++ b/arch/ppc/syslib/i8259.c @@ -129,14 +129,11 @@ static void i8259_end_irq(unsigned int irq) } struct hw_interrupt_type i8259_pic = { - " i8259 ", - NULL, - NULL, - i8259_unmask_irq, - i8259_mask_irq, - i8259_mask_and_ack_irq, - i8259_end_irq, - NULL + .typename = " i8259 ", + .enable = i8259_unmask_irq, + .disable = i8259_mask_irq, + .ack = i8259_mask_and_ack_irq, + .end = i8259_end_irq, }; static struct resource pic1_iores = { diff --git a/arch/ppc/syslib/ibm440gx_common.c b/arch/ppc/syslib/ibm440gx_common.c index d4776af6a3ca..0bb919859b8b 100644 --- a/arch/ppc/syslib/ibm440gx_common.c +++ b/arch/ppc/syslib/ibm440gx_common.c @@ -236,9 +236,10 @@ void __init ibm440gx_l2c_setup(struct ibm44x_clocks* p) /* Disable L2C on rev.A, rev.B and 800MHz version of rev.C, enable it on all other revisions */ - u32 pvr = mfspr(SPRN_PVR); - if (pvr == PVR_440GX_RA || pvr == PVR_440GX_RB || - (pvr == PVR_440GX_RC && p->cpu > 667000000)) + if (strcmp(cur_cpu_spec[0]->cpu_name, "440GX Rev. A") == 0 || + strcmp(cur_cpu_spec[0]->cpu_name, "440GX Rev. B") == 0 + || (strcmp(cur_cpu_spec[0]->cpu_name, "440GX Rev. C") + == 0 && p->cpu > 667000000)) ibm440gx_l2c_disable(); else ibm440gx_l2c_enable(); diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index a3702cfe8f7c..4c888da89b3c 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -57,7 +57,7 @@ unsigned char __res[sizeof(bd_t)]; extern void m8xx_ide_init(void); extern unsigned long find_available_memory(void); -extern void m8xx_cpm_reset(); +extern void m8xx_cpm_reset(void); extern void m8xx_wdt_handler_install(bd_t *bp); extern void rpxfb_alloc_pages(void); extern void cpm_interrupt_init(void); @@ -266,8 +266,8 @@ m8xx_show_percpuinfo(struct seq_file *m, int i) bp = (bd_t *)__res; - seq_printf(m, "clock\t\t: %ldMHz\n" - "bus clock\t: %ldMHz\n", + seq_printf(m, "clock\t\t: %uMHz\n" + "bus clock\t: %uMHz\n", bp->bi_intfreq / 1000000, bp->bi_busfreq / 1000000); diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c index 87065e2e4c5f..3e039706bdbc 100644 --- a/arch/ppc/syslib/mpc10x_common.c +++ b/arch/ppc/syslib/mpc10x_common.c @@ -140,12 +140,12 @@ struct platform_device ppc_sys_platform_devices[] = { }, [MPC10X_UART0] = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev.platform_data = serial_plat_uart0, }, [MPC10X_UART1] = { .name = "serial8250", - .id = 1, + .id = PLAT8250_DEV_PLATFORM1, .dev.platform_data = serial_plat_uart1, }, diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c index 5aaf0e58e1f9..95b3b8a7f0ba 100644 --- a/arch/ppc/syslib/mpc83xx_devices.c +++ b/arch/ppc/syslib/mpc83xx_devices.c @@ -165,7 +165,7 @@ struct platform_device ppc_sys_platform_devices[] = { }, [MPC83xx_DUART] = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev.platform_data = serial_platform_data, }, [MPC83xx_SEC2] = { diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c index 8af322dd476a..bbc5ac0de878 100644 --- a/arch/ppc/syslib/mpc85xx_devices.c +++ b/arch/ppc/syslib/mpc85xx_devices.c @@ -282,7 +282,7 @@ struct platform_device ppc_sys_platform_devices[] = { }, [MPC85xx_DUART] = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev.platform_data = serial_platform_data, }, [MPC85xx_PERFMON] = { diff --git a/arch/ppc/syslib/mv64360_pic.c b/arch/ppc/syslib/mv64360_pic.c index 74d8996418e9..8356da4678a2 100644 --- a/arch/ppc/syslib/mv64360_pic.c +++ b/arch/ppc/syslib/mv64360_pic.c @@ -366,10 +366,16 @@ mv64360_pci_error_int_handler(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } +/* + * Bit 0 of MV64x60_PCIx_ERR_MASK does not exist on the 64360 and because of + * errata FEr-#11 and FEr-##16 for the 64460, it should be 0 on that chip as + * well. IOW, don't set bit 0. + */ +#define MV64360_PCI0_ERR_MASK_VAL 0x00a50c24 + static int __init mv64360_register_hdlrs(void) { - u32 mask; int rc; /* Clear old errors and register CPU interface error intr handler */ @@ -387,17 +393,6 @@ mv64360_register_hdlrs(void) mv64360_sram_error_int_handler,SA_INTERRUPT,SRAM_INTR_STR, 0))) printk(KERN_WARNING "Can't register SRAM error handler: %d",rc); - /* - * Bit 0 reserved on 64360 and erratum FEr PCI-#11 (PCI internal - * data parity error set incorrectly) on rev 0 & 1 of 64460 requires - * bit 0 to be cleared. - */ - mask = 0x00a50c24; - - if ((mv64x60_get_bridge_type() == MV64x60_TYPE_MV64460) && - (mv64x60_get_bridge_rev() > 1)) - mask |= 0x1; /* enable DPErr on 64460 */ - /* Clear old errors and register PCI 0 error intr handler */ mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, 0); if ((rc = request_irq(MV64360_IRQ_PCI0 + mv64360_irq_base, @@ -407,7 +402,11 @@ mv64360_register_hdlrs(void) rc); mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0); - mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, mask); + mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, MV64360_PCI0_ERR_MASK_VAL); + + /* Erratum FEr PCI-#16 says to clear bit 0 of PCI SERRn Mask reg. */ + mv64x60_write(&bh, MV64x60_PCI0_ERR_SERR_MASK, + mv64x60_read(&bh, MV64x60_PCI0_ERR_SERR_MASK) & ~0x1UL); /* Clear old errors and register PCI 1 error intr handler */ mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, 0); @@ -418,7 +417,11 @@ mv64360_register_hdlrs(void) rc); mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0); - mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, mask); + mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, MV64360_PCI0_ERR_MASK_VAL); + + /* Erratum FEr PCI-#16 says to clear bit 0 of PCI Intr Mask reg. */ + mv64x60_write(&bh, MV64x60_PCI1_ERR_SERR_MASK, + mv64x60_read(&bh, MV64x60_PCI1_ERR_SERR_MASK) & ~0x1UL); return 0; } diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c index cc77177fa1c6..839f8872826f 100644 --- a/arch/ppc/syslib/mv64x60.c +++ b/arch/ppc/syslib/mv64x60.c @@ -30,13 +30,16 @@ #include <asm/mv64x60.h> -u8 mv64x60_pci_exclude_bridge = 1; -spinlock_t mv64x60_lock = SPIN_LOCK_UNLOCKED; +u8 mv64x60_pci_exclude_bridge = 1; +DEFINE_SPINLOCK(mv64x60_lock); -static phys_addr_t mv64x60_bridge_pbase = 0; -static void *mv64x60_bridge_vbase = 0; +static phys_addr_t mv64x60_bridge_pbase; +static void *mv64x60_bridge_vbase; static u32 mv64x60_bridge_type = MV64x60_TYPE_INVALID; -static u32 mv64x60_bridge_rev = 0; +static u32 mv64x60_bridge_rev; +#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260) +static struct pci_controller sysfs_hose_a; +#endif static u32 gt64260_translate_size(u32 base, u32 size, u32 num_bits); static u32 gt64260_untranslate_size(u32 base, u32 size, u32 num_bits); @@ -432,6 +435,20 @@ static struct platform_device i2c_device = { }; #endif +#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260) +static struct mv64xxx_pdata mv64xxx_pdata = { + .hs_reg_valid = 0, +}; + +static struct platform_device mv64xxx_device = { /* general mv64x60 stuff */ + .name = MV64XXX_DEV_NAME, + .id = 0, + .dev = { + .platform_data = &mv64xxx_pdata, + }, +}; +#endif + static struct platform_device *mv64x60_pd_devs[] __initdata = { #ifdef CONFIG_SERIAL_MPSC &mpsc_shared_device, @@ -453,6 +470,9 @@ static struct platform_device *mv64x60_pd_devs[] __initdata = { #ifdef CONFIG_I2C_MV64XXX &i2c_device, #endif +#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260) + &mv64xxx_device, +#endif }; /* @@ -574,6 +594,11 @@ mv64x60_early_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si) bh->hose_a = &hose_a; bh->hose_b = &hose_b; +#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260) + /* Save a copy of hose_a for sysfs functions -- hack */ + memcpy(&sysfs_hose_a, &hose_a, sizeof(hose_a)); +#endif + mv64x60_set_bus(bh, 0, 0); mv64x60_set_bus(bh, 1, 0); @@ -590,8 +615,6 @@ mv64x60_early_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si) mv64x60_set_bits(bh, MV64x60_PCI0_TO_RETRY, 0xffff); mv64x60_set_bits(bh, MV64x60_PCI1_TO_RETRY, 0xffff); - - return; } /* @@ -628,19 +651,15 @@ mv64x60_get_32bit_window(struct mv64x60_handle *bh, u32 window, val = mv64x60_read(bh, size_reg); val = get_from_field(val, size_bits); *size = bh->ci->untranslate_size(*base, val, size_bits); - } - else + } else *size = 0; - } - else { + } else { *base = 0; *size = 0; } pr_debug("get 32bit window: %d, base: 0x%x, size: 0x%x\n", window, *base, *size); - - return; } /* @@ -677,8 +696,6 @@ mv64x60_set_32bit_window(struct mv64x60_handle *bh, u32 window, (void)mv64x60_read(bh, base_reg); /* Flush FIFO */ } - - return; } /* @@ -712,11 +729,9 @@ mv64x60_get_64bit_window(struct mv64x60_handle *bh, u32 window, val = get_from_field(val, size_bits); *size = bh->ci->untranslate_size(*base_lo, val, size_bits); - } - else + } else *size = 0; - } - else { + } else { *base_hi = 0; *base_lo = 0; *size = 0; @@ -724,8 +739,6 @@ mv64x60_get_64bit_window(struct mv64x60_handle *bh, u32 window, pr_debug("get 64bit window: %d, base hi: 0x%x, base lo: 0x%x, " "size: 0x%x\n", window, *base_hi, *base_lo, *size); - - return; } /* @@ -766,8 +779,6 @@ mv64x60_set_64bit_window(struct mv64x60_handle *bh, u32 window, (void)mv64x60_read(bh, base_lo_reg); /* Flush FIFO */ } - - return; } /* @@ -1008,8 +1019,6 @@ mv64x60_get_mem_windows(struct mv64x60_handle *bh, mem_windows[i][0] = 0; mem_windows[i][1] = 0; } - - return; } /* @@ -1077,8 +1086,6 @@ mv64x60_config_cpu2mem_windows(struct mv64x60_handle *bh, } } - - return; } /* @@ -1112,8 +1119,7 @@ mv64x60_config_cpu2pci_windows(struct mv64x60_handle *bh, mv64x60_set_32bit_window(bh, remap_tab[bus][0], pi->pci_io.pci_base_lo, 0, 0); bh->ci->enable_window_32bit(bh, win_tab[bus][0]); - } - else /* Actually, the window should already be disabled */ + } else /* Actually, the window should already be disabled */ bh->ci->disable_window_32bit(bh, win_tab[bus][0]); for (i=0; i<3; i++) @@ -1125,11 +1131,8 @@ mv64x60_config_cpu2pci_windows(struct mv64x60_handle *bh, pi->pci_mem[i].pci_base_hi, pi->pci_mem[i].pci_base_lo, 0, 0); bh->ci->enable_window_32bit(bh, win_tab[bus][i+1]); - } - else /* Actually, the window should already be disabled */ + } else /* Actually, the window should already be disabled */ bh->ci->disable_window_32bit(bh, win_tab[bus][i+1]); - - return; } /* @@ -1206,8 +1209,6 @@ mv64x60_config_pci2mem_windows(struct mv64x60_handle *bh, MV64x60_PCI0_BAR_ENABLE : MV64x60_PCI1_BAR_ENABLE), (1 << i)); } - - return; } /* @@ -1229,7 +1230,6 @@ mv64x60_alloc_hose(struct mv64x60_handle *bh, u32 cfg_addr, u32 cfg_data, *hose = pcibios_alloc_controller(); setup_indirect_pci_nomap(*hose, bh->v_base + cfg_addr, bh->v_base + cfg_data); - return; } /* @@ -1272,7 +1272,6 @@ mv64x60_config_resources(struct pci_controller *hose, pi->pci_mem[0].size - 1; hose->pci_mem_offset = pi->pci_mem[0].cpu_base - pi->pci_mem[0].pci_base_lo; - return; } /* @@ -1309,7 +1308,6 @@ mv64x60_config_pci_params(struct pci_controller *hose, early_write_config_word(hose, 0, devfn, PCI_CACHE_LINE_SIZE, u16_val); mv64x60_pci_exclude_bridge = save_exclude; - return; } /* @@ -1336,8 +1334,7 @@ mv64x60_set_bus(struct mv64x60_handle *bh, u32 bus, u32 child_bus) p2p_cfg = MV64x60_PCI0_P2P_CONFIG; pci_cfg_offset = 0x64; hose = bh->hose_a; - } - else { + } else { pci_mode = bh->pci_mode_b; p2p_cfg = MV64x60_PCI1_P2P_CONFIG; pci_cfg_offset = 0xe4; @@ -1352,8 +1349,7 @@ mv64x60_set_bus(struct mv64x60_handle *bh, u32 bus, u32 child_bus) val |= (child_bus << 16) | 0xff; mv64x60_write(bh, p2p_cfg, val); (void)mv64x60_read(bh, p2p_cfg); /* Flush FIFO */ - } - else { /* PCI-X */ + } else { /* PCI-X */ /* * Need to use the current bus/dev number (that's in the * P2P CONFIG reg) to access the bridge's pci config space. @@ -1365,8 +1361,6 @@ mv64x60_set_bus(struct mv64x60_handle *bh, u32 bus, u32 child_bus) pci_cfg_offset, child_bus << 8); mv64x60_pci_exclude_bridge = save_exclude; } - - return; } /* @@ -1423,8 +1417,6 @@ mv64x60_pd_fixup(struct mv64x60_handle *bh, struct platform_device *pd_devs[], j++; } } - - return; } /* @@ -1498,8 +1490,6 @@ gt64260_set_pci2mem_window(struct pci_controller *hose, u32 bus, u32 window, early_write_config_dword(hose, 0, PCI_DEVFN(0, 0), gt64260_reg_addrs[bus][window], mv64x60_mask(base, 20) | 0x8); mv64x60_pci_exclude_bridge = save_exclude; - - return; } /* @@ -1523,8 +1513,6 @@ gt64260_set_pci2regs_window(struct mv64x60_handle *bh, early_write_config_dword(hose, 0, PCI_DEVFN(0,0), gt64260_offset[bus], (base << 16)); mv64x60_pci_exclude_bridge = save_exclude; - - return; } /* @@ -1561,7 +1549,6 @@ static void __init gt64260_enable_window_32bit(struct mv64x60_handle *bh, u32 window) { pr_debug("enable 32bit window: %d\n", window); - return; } /* @@ -1584,8 +1571,6 @@ gt64260_disable_window_32bit(struct mv64x60_handle *bh, u32 window) mv64x60_write(bh, gt64260_32bit_windows[window].base_reg,0xfff); mv64x60_write(bh, gt64260_32bit_windows[window].size_reg, 0); } - - return; } /* @@ -1599,7 +1584,6 @@ static void __init gt64260_enable_window_64bit(struct mv64x60_handle *bh, u32 window) { pr_debug("enable 64bit window: %d\n", window); - return; /* Enabled when window configured (i.e., when top >= base) */ } /* @@ -1624,8 +1608,6 @@ gt64260_disable_window_64bit(struct mv64x60_handle *bh, u32 window) mv64x60_write(bh, gt64260_64bit_windows[window].base_hi_reg, 0); mv64x60_write(bh, gt64260_64bit_windows[window].size_reg, 0); } - - return; } /* @@ -1712,8 +1694,6 @@ gt64260_disable_all_windows(struct mv64x60_handle *bh, mv64x60_write(bh, GT64260_IC_CPU_INT_1_MASK, 0); mv64x60_write(bh, GT64260_IC_CPU_INT_2_MASK, 0); mv64x60_write(bh, GT64260_IC_CPU_INT_3_MASK, 0); - - return; } /* @@ -1781,14 +1761,11 @@ gt64260a_chip_specific_init(struct mv64x60_handle *bh, mv64x60_mpsc1_pdata.cache_mgmt = 1; if ((r = platform_get_resource(&mpsc1_device, IORESOURCE_IRQ, 0)) - != NULL) { - + != NULL) { r->start = MV64x60_IRQ_SDMA_0; r->end = MV64x60_IRQ_SDMA_0; } #endif - - return; } /* @@ -1861,14 +1838,11 @@ gt64260b_chip_specific_init(struct mv64x60_handle *bh, mv64x60_mpsc1_pdata.cache_mgmt = 1; if ((r = platform_get_resource(&mpsc1_device, IORESOURCE_IRQ, 0)) - != NULL) { - + != NULL) { r->start = MV64x60_IRQ_SDMA_0; r->end = MV64x60_IRQ_SDMA_0; } #endif - - return; } /* @@ -1945,8 +1919,6 @@ mv64360_set_pci2mem_window(struct pci_controller *hose, u32 bus, u32 window, mv64360_reg_addrs[bus][window].base_lo_bar, mv64x60_mask(base,20) | 0xc); mv64x60_pci_exclude_bridge = save_exclude; - - return; } /* @@ -1972,8 +1944,6 @@ mv64360_set_pci2regs_window(struct mv64x60_handle *bh, early_write_config_dword(hose, 0, PCI_DEVFN(0,0), mv64360_offset[bus][1], 0); mv64x60_pci_exclude_bridge = save_exclude; - - return; } /* @@ -2082,8 +2052,6 @@ mv64360_enable_window_32bit(struct mv64x60_handle *bh, u32 window) "32bit table corrupted"); } } - - return; } /* @@ -2139,8 +2107,6 @@ mv64360_disable_window_32bit(struct mv64x60_handle *bh, u32 window) "32bit table corrupted"); } } - - return; } /* @@ -2158,8 +2124,7 @@ mv64360_enable_window_64bit(struct mv64x60_handle *bh, u32 window) (mv64360_64bit_windows[window].size_reg != 0)) { if ((mv64360_64bit_windows[window].extra & MV64x60_EXTRA_MASK) - == MV64x60_EXTRA_PCIACC_ENAB) - + == MV64x60_EXTRA_PCIACC_ENAB) mv64x60_set_bits(bh, mv64360_64bit_windows[window].base_lo_reg, (1 << (mv64360_64bit_windows[window].extra & @@ -2168,8 +2133,6 @@ mv64360_enable_window_64bit(struct mv64x60_handle *bh, u32 window) printk(KERN_ERR "mv64360_enable: %s\n", "64bit table corrupted"); } - - return; } /* @@ -2186,11 +2149,9 @@ mv64360_disable_window_64bit(struct mv64x60_handle *bh, u32 window) mv64360_64bit_windows[window].size_reg); if ((mv64360_64bit_windows[window].base_lo_reg != 0) && - (mv64360_64bit_windows[window].size_reg != 0)) { - + (mv64360_64bit_windows[window].size_reg != 0)) { if ((mv64360_64bit_windows[window].extra & MV64x60_EXTRA_MASK) - == MV64x60_EXTRA_PCIACC_ENAB) - + == MV64x60_EXTRA_PCIACC_ENAB) mv64x60_clr_bits(bh, mv64360_64bit_windows[window].base_lo_reg, (1 << (mv64360_64bit_windows[window].extra & @@ -2199,8 +2160,6 @@ mv64360_disable_window_64bit(struct mv64x60_handle *bh, u32 window) printk(KERN_ERR "mv64360_disable: %s\n", "64bit table corrupted"); } - - return; } /* @@ -2241,8 +2200,6 @@ mv64360_disable_all_windows(struct mv64x60_handle *bh, /* Disable all PCI-><whatever> windows */ mv64x60_set_bits(bh, MV64x60_PCI0_BAR_ENABLE, 0x0000f9ff); mv64x60_set_bits(bh, MV64x60_PCI1_BAR_ENABLE, 0x0000f9ff); - - return; } /* @@ -2335,8 +2292,6 @@ mv64360_config_io2mem_windows(struct mv64x60_handle *bh, mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_3, (0x3 << (i << 1))); } - - return; } /* @@ -2350,42 +2305,145 @@ static void __init mv64360_set_mpsc2regs_window(struct mv64x60_handle *bh, u32 base) { pr_debug("set mpsc->internal regs, base: 0x%x\n", base); - mv64x60_write(bh, MV64360_MPSC2REGS_BASE, base & 0xffff0000); - return; } /* * mv64360_chip_specific_init() * - * No errata work arounds for the MV64360 implemented at this point. + * Implement errata work arounds for the MV64360. */ static void __init mv64360_chip_specific_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si) { +#if !defined(CONFIG_NOT_COHERENT_CACHE) + mv64x60_set_bits(bh, MV64360_D_UNIT_CONTROL_HIGH, (1<<24)); +#endif #ifdef CONFIG_SERIAL_MPSC mv64x60_mpsc0_pdata.brg_can_tune = 1; mv64x60_mpsc0_pdata.cache_mgmt = 1; mv64x60_mpsc1_pdata.brg_can_tune = 1; mv64x60_mpsc1_pdata.cache_mgmt = 1; #endif - - return; } /* * mv64460_chip_specific_init() * - * No errata work arounds for the MV64460 implemented at this point. + * Implement errata work arounds for the MV64460. */ static void __init mv64460_chip_specific_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si) { +#if !defined(CONFIG_NOT_COHERENT_CACHE) + mv64x60_set_bits(bh, MV64360_D_UNIT_CONTROL_HIGH, (1<<24) | (1<<25)); + mv64x60_set_bits(bh, MV64460_D_UNIT_MMASK, (1<<1) | (1<<4)); +#endif #ifdef CONFIG_SERIAL_MPSC mv64x60_mpsc0_pdata.brg_can_tune = 1; + mv64x60_mpsc0_pdata.cache_mgmt = 1; mv64x60_mpsc1_pdata.brg_can_tune = 1; + mv64x60_mpsc1_pdata.cache_mgmt = 1; #endif - return; } + + +#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260) +/* Export the hotswap register via sysfs for enum event monitoring */ +#define VAL_LEN_MAX 11 /* 32-bit hex or dec stringified number + '\n' */ + +DECLARE_MUTEX(mv64xxx_hs_lock); + +static ssize_t +mv64xxx_hs_reg_read(struct kobject *kobj, char *buf, loff_t off, size_t count) +{ + u32 v; + u8 save_exclude; + + if (off > 0) + return 0; + if (count < VAL_LEN_MAX) + return -EINVAL; + + if (down_interruptible(&mv64xxx_hs_lock)) + return -ERESTARTSYS; + save_exclude = mv64x60_pci_exclude_bridge; + mv64x60_pci_exclude_bridge = 0; + early_read_config_dword(&sysfs_hose_a, 0, PCI_DEVFN(0, 0), + MV64360_PCICFG_CPCI_HOTSWAP, &v); + mv64x60_pci_exclude_bridge = save_exclude; + up(&mv64xxx_hs_lock); + + return sprintf(buf, "0x%08x\n", v); +} + +static ssize_t +mv64xxx_hs_reg_write(struct kobject *kobj, char *buf, loff_t off, size_t count) +{ + u32 v; + u8 save_exclude; + + if (off > 0) + return 0; + if (count <= 0) + return -EINVAL; + + if (sscanf(buf, "%i", &v) == 1) { + if (down_interruptible(&mv64xxx_hs_lock)) + return -ERESTARTSYS; + save_exclude = mv64x60_pci_exclude_bridge; + mv64x60_pci_exclude_bridge = 0; + early_write_config_dword(&sysfs_hose_a, 0, PCI_DEVFN(0, 0), + MV64360_PCICFG_CPCI_HOTSWAP, v); + mv64x60_pci_exclude_bridge = save_exclude; + up(&mv64xxx_hs_lock); + } + else + count = -EINVAL; + + return count; +} + +static struct bin_attribute mv64xxx_hs_reg_attr = { /* Hotswap register */ + .attr = { + .name = "hs_reg", + .mode = S_IRUGO | S_IWUSR, + .owner = THIS_MODULE, + }, + .size = VAL_LEN_MAX, + .read = mv64xxx_hs_reg_read, + .write = mv64xxx_hs_reg_write, +}; + +/* Provide sysfs file indicating if this platform supports the hs_reg */ +static ssize_t +mv64xxx_hs_reg_valid_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct platform_device *pdev; + struct mv64xxx_pdata *pdp; + u32 v; + + pdev = container_of(dev, struct platform_device, dev); + pdp = (struct mv64xxx_pdata *)pdev->dev.platform_data; + + if (down_interruptible(&mv64xxx_hs_lock)) + return -ERESTARTSYS; + v = pdp->hs_reg_valid; + up(&mv64xxx_hs_lock); + + return sprintf(buf, "%i\n", v); +} +static DEVICE_ATTR(hs_reg_valid, S_IRUGO, mv64xxx_hs_reg_valid_show, NULL); + +static int __init +mv64xxx_sysfs_init(void) +{ + sysfs_create_bin_file(&mv64xxx_device.dev.kobj, &mv64xxx_hs_reg_attr); + sysfs_create_file(&mv64xxx_device.dev.kobj,&dev_attr_hs_reg_valid.attr); + return 0; +} +subsys_initcall(mv64xxx_sysfs_init); +#endif diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c index e5fd2ae503ea..9ccce438bd7a 100644 --- a/arch/ppc/syslib/ocp.c +++ b/arch/ppc/syslib/ocp.c @@ -165,7 +165,7 @@ ocp_device_remove(struct device *dev) } static int -ocp_device_suspend(struct device *dev, u32 state) +ocp_device_suspend(struct device *dev, pm_message_t state) { struct ocp_device *ocp_dev = to_ocp_dev(dev); struct ocp_driver *ocp_drv = to_ocp_drv(dev->driver); diff --git a/arch/ppc/syslib/of_device.c b/arch/ppc/syslib/of_device.c index 1eb4f726ca9f..da8a0f2128dc 100644 --- a/arch/ppc/syslib/of_device.c +++ b/arch/ppc/syslib/of_device.c @@ -105,7 +105,7 @@ static int of_device_remove(struct device *dev) return 0; } -static int of_device_suspend(struct device *dev, u32 state) +static int of_device_suspend(struct device *dev, pm_message_t state) { struct of_device * of_dev = to_of_device(dev); struct of_platform_driver * drv = to_of_platform_driver(dev->driver); diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c index ad39b86ca92c..53da58523e39 100644 --- a/arch/ppc/syslib/open_pic.c +++ b/arch/ppc/syslib/open_pic.c @@ -948,7 +948,7 @@ static void openpic_cached_disable_irq(u_int irq) * we need something better to deal with that... Maybe switch to S1 for * cpufreq changes */ -int openpic_suspend(struct sys_device *sysdev, u32 state) +int openpic_suspend(struct sys_device *sysdev, pm_message_t state) { int i; unsigned long flags; diff --git a/arch/ppc/syslib/open_pic2.c b/arch/ppc/syslib/open_pic2.c index 7e272c51a497..2e0ea92144f6 100644 --- a/arch/ppc/syslib/open_pic2.c +++ b/arch/ppc/syslib/open_pic2.c @@ -82,13 +82,11 @@ static void openpic2_end_irq(unsigned int irq_nr); static void openpic2_ack_irq(unsigned int irq_nr); struct hw_interrupt_type open_pic2 = { - " OpenPIC2 ", - NULL, - NULL, - openpic2_enable_irq, - openpic2_disable_irq, - openpic2_ack_irq, - openpic2_end_irq, + .typename = " OpenPIC2 ", + .enable = openpic2_enable_irq, + .disable = openpic2_disable_irq, + .ack = openpic2_ack_irq, + .end = openpic2_end_irq, }; /* diff --git a/arch/ppc/syslib/ppc403_pic.c b/arch/ppc/syslib/ppc403_pic.c index 06cb0af2a58d..ce4d1deb86e9 100644 --- a/arch/ppc/syslib/ppc403_pic.c +++ b/arch/ppc/syslib/ppc403_pic.c @@ -34,13 +34,10 @@ static void ppc403_aic_disable(unsigned int irq); static void ppc403_aic_disable_and_ack(unsigned int irq); static struct hw_interrupt_type ppc403_aic = { - "403GC AIC", - NULL, - NULL, - ppc403_aic_enable, - ppc403_aic_disable, - ppc403_aic_disable_and_ack, - 0 + .typename = "403GC AIC", + .enable = ppc403_aic_enable, + .disable = ppc403_aic_disable, + .ack = ppc403_aic_disable_and_ack, }; int diff --git a/arch/ppc/syslib/ppc4xx_setup.c b/arch/ppc/syslib/ppc4xx_setup.c index e170aebeb69b..b843c4fef25e 100644 --- a/arch/ppc/syslib/ppc4xx_setup.c +++ b/arch/ppc/syslib/ppc4xx_setup.c @@ -48,10 +48,6 @@ extern void abort(void); extern void ppc4xx_find_bridges(void); -extern void ppc4xx_wdt_heartbeat(void); -extern int wdt_enable; -extern unsigned long wdt_period; - /* Global Variables */ bd_t __res; @@ -171,7 +167,7 @@ ppc4xx_calibrate_decr(void) unsigned int freq; bd_t *bip = &__res; -#if defined(CONFIG_WALNUT) || defined(CONFIG_ASH) || defined(CONFIG_SYCAMORE) +#if defined(CONFIG_WALNUT) || defined(CONFIG_SYCAMORE) /* Walnut boot rom sets DCR CHCR1 (aka CPC0_CR1) bit CETE to 1 */ mtdcr(DCRN_CHCR1, mfdcr(DCRN_CHCR1) & ~CHR1_CETE); #endif @@ -257,22 +253,6 @@ ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5, *(char *) (r7 + KERNELBASE) = 0; strcpy(cmd_line, (char *) (r6 + KERNELBASE)); } -#if defined(CONFIG_PPC405_WDT) -/* Look for wdt= option on command line */ - if (strstr(cmd_line, "wdt=")) { - int valid_wdt = 0; - char *p, *q; - for (q = cmd_line; (p = strstr(q, "wdt=")) != 0;) { - q = p + 4; - if (p > cmd_line && p[-1] != ' ') - continue; - wdt_period = simple_strtoul(q, &q, 0); - valid_wdt = 1; - ++q; - } - wdt_enable = valid_wdt; - } -#endif /* Initialize machine-dependent vectors */ @@ -287,11 +267,6 @@ ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5, ppc_md.calibrate_decr = ppc4xx_calibrate_decr; -#ifdef CONFIG_PPC405_WDT - ppc_md.heartbeat = ppc4xx_wdt_heartbeat; -#endif - ppc_md.heartbeat_count = 0; - ppc_md.find_end_of_memory = ppc4xx_find_end_of_memory; ppc_md.setup_io_mappings = ppc4xx_map_io; diff --git a/arch/ppc/syslib/ppc83xx_pci.h b/arch/ppc/syslib/ppc83xx_pci.h new file mode 100644 index 000000000000..ec691640f6be --- /dev/null +++ b/arch/ppc/syslib/ppc83xx_pci.h @@ -0,0 +1,151 @@ +/* Created by Tony Li <tony.li@freescale.com> + * Copyright (c) 2005 freescale semiconductor + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __PPC_SYSLIB_PPC83XX_PCI_H +#define __PPC_SYSLIB_PPC83XX_PCI_H + +typedef struct immr_clk { + u32 spmr; /* system PLL mode Register */ + u32 occr; /* output clock control Register */ + u32 sccr; /* system clock control Register */ + u8 res0[0xF4]; +} immr_clk_t; + +/* + * Sequencer + */ +typedef struct immr_ios { + u32 potar0; + u8 res0[4]; + u32 pobar0; + u8 res1[4]; + u32 pocmr0; + u8 res2[4]; + u32 potar1; + u8 res3[4]; + u32 pobar1; + u8 res4[4]; + u32 pocmr1; + u8 res5[4]; + u32 potar2; + u8 res6[4]; + u32 pobar2; + u8 res7[4]; + u32 pocmr2; + u8 res8[4]; + u32 potar3; + u8 res9[4]; + u32 pobar3; + u8 res10[4]; + u32 pocmr3; + u8 res11[4]; + u32 potar4; + u8 res12[4]; + u32 pobar4; + u8 res13[4]; + u32 pocmr4; + u8 res14[4]; + u32 potar5; + u8 res15[4]; + u32 pobar5; + u8 res16[4]; + u32 pocmr5; + u8 res17[4]; + u8 res18[0x60]; + u32 pmcr; + u8 res19[4]; + u32 dtcr; + u8 res20[4]; +} immr_ios_t; +#define POTAR_TA_MASK 0x000fffff +#define POBAR_BA_MASK 0x000fffff +#define POCMR_EN 0x80000000 +#define POCMR_IO 0x40000000 /* 0--memory space 1--I/O space */ +#define POCMR_SE 0x20000000 /* streaming enable */ +#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2 */ +#define POCMR_CM_MASK 0x000fffff + +/* + * PCI Controller Control and Status Registers + */ +typedef struct immr_pcictrl { + u32 esr; + u32 ecdr; + u32 eer; + u32 eatcr; + u32 eacr; + u32 eeacr; + u32 edlcr; + u32 edhcr; + u32 gcr; + u32 ecr; + u32 gsr; + u8 res0[12]; + u32 pitar2; + u8 res1[4]; + u32 pibar2; + u32 piebar2; + u32 piwar2; + u8 res2[4]; + u32 pitar1; + u8 res3[4]; + u32 pibar1; + u32 piebar1; + u32 piwar1; + u8 res4[4]; + u32 pitar0; + u8 res5[4]; + u32 pibar0; + u8 res6[4]; + u32 piwar0; + u8 res7[132]; +} immr_pcictrl_t; +#define PITAR_TA_MASK 0x000fffff +#define PIBAR_MASK 0xffffffff +#define PIEBAR_EBA_MASK 0x000fffff +#define PIWAR_EN 0x80000000 +#define PIWAR_PF 0x20000000 +#define PIWAR_RTT_MASK 0x000f0000 +#define PIWAR_RTT_NO_SNOOP 0x00040000 +#define PIWAR_RTT_SNOOP 0x00050000 +#define PIWAR_WTT_MASK 0x0000f000 +#define PIWAR_WTT_NO_SNOOP 0x00004000 +#define PIWAR_WTT_SNOOP 0x00005000 +#define PIWAR_IWS_MASK 0x0000003F +#define PIWAR_IWS_4K 0x0000000B +#define PIWAR_IWS_8K 0x0000000C +#define PIWAR_IWS_16K 0x0000000D +#define PIWAR_IWS_32K 0x0000000E +#define PIWAR_IWS_64K 0x0000000F +#define PIWAR_IWS_128K 0x00000010 +#define PIWAR_IWS_256K 0x00000011 +#define PIWAR_IWS_512K 0x00000012 +#define PIWAR_IWS_1M 0x00000013 +#define PIWAR_IWS_2M 0x00000014 +#define PIWAR_IWS_4M 0x00000015 +#define PIWAR_IWS_8M 0x00000016 +#define PIWAR_IWS_16M 0x00000017 +#define PIWAR_IWS_32M 0x00000018 +#define PIWAR_IWS_64M 0x00000019 +#define PIWAR_IWS_128M 0x0000001A +#define PIWAR_IWS_256M 0x0000001B +#define PIWAR_IWS_512M 0x0000001C +#define PIWAR_IWS_1G 0x0000001D +#define PIWAR_IWS_2G 0x0000001E + +#endif /* __PPC_SYSLIB_PPC83XX_PCI_H */ diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c index 602a86891f7f..890484e576e7 100644 --- a/arch/ppc/syslib/ppc83xx_setup.c +++ b/arch/ppc/syslib/ppc83xx_setup.c @@ -11,6 +11,17 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Added PCI support -- Tony Li <tony.li@freescale.com> */ #include <linux/config.h> @@ -31,6 +42,10 @@ #include <asm/delay.h> #include <syslib/ppc83xx_setup.h> +#if defined(CONFIG_PCI) +#include <asm/delay.h> +#include <syslib/ppc83xx_pci.h> +#endif phys_addr_t immrbar; @@ -162,4 +177,237 @@ mpc83xx_halt(void) for(;;); } -/* PCI SUPPORT DOES NOT EXIT, MODEL after ppc85xx_setup.c */ +#if defined(CONFIG_PCI) +void __init +mpc83xx_setup_pci1(struct pci_controller *hose) +{ + u16 reg16; + volatile immr_pcictrl_t * pci_ctrl; + volatile immr_ios_t * ios; + bd_t *binfo = (bd_t *) __res; + + pci_ctrl = ioremap(binfo->bi_immr_base + 0x8500, sizeof(immr_pcictrl_t)); + ios = ioremap(binfo->bi_immr_base + 0x8400, sizeof(immr_ios_t)); + + /* + * Configure PCI Outbound Translation Windows + */ + ios->potar0 = (MPC83xx_PCI1_LOWER_MEM >> 12) & POTAR_TA_MASK; + ios->pobar0 = (MPC83xx_PCI1_LOWER_MEM >> 12) & POBAR_BA_MASK; + ios->pocmr0 = POCMR_EN | + (((0xffffffff - (MPC83xx_PCI1_UPPER_MEM - + MPC83xx_PCI1_LOWER_MEM)) >> 12) & POCMR_CM_MASK); + + /* mapped to PCI1 IO space */ + ios->potar1 = (MPC83xx_PCI1_LOWER_IO >> 12) & POTAR_TA_MASK; + ios->pobar1 = (MPC83xx_PCI1_IO_BASE >> 12) & POBAR_BA_MASK; + ios->pocmr1 = POCMR_EN | POCMR_IO | + (((0xffffffff - (MPC83xx_PCI1_UPPER_IO - + MPC83xx_PCI1_LOWER_IO)) >> 12) & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl->pitar1 = 0x0; + pci_ctrl->pibar1 = 0x0; + pci_ctrl->piebar1 = 0x0; + pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_2G; + + /* + * Release PCI RST signal + */ + pci_ctrl->gcr = 0; + udelay(2000); + pci_ctrl->gcr = 1; + udelay(2000); + + reg16 = 0xff; + early_read_config_word(hose, hose->first_busno, 0, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + early_write_config_word(hose, hose->first_busno, 0, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + early_write_config_word(hose, hose->first_busno, 0, PCI_STATUS, 0xffff); + early_write_config_byte(hose, hose->first_busno, 0, PCI_LATENCY_TIMER, 0x80); + + iounmap(pci_ctrl); + iounmap(ios); +} + +void __init +mpc83xx_setup_pci2(struct pci_controller *hose) +{ + u16 reg16; + volatile immr_pcictrl_t * pci_ctrl; + volatile immr_ios_t * ios; + bd_t *binfo = (bd_t *) __res; + + pci_ctrl = ioremap(binfo->bi_immr_base + 0x8600, sizeof(immr_pcictrl_t)); + ios = ioremap(binfo->bi_immr_base + 0x8400, sizeof(immr_ios_t)); + + /* + * Configure PCI Outbound Translation Windows + */ + ios->potar3 = (MPC83xx_PCI2_LOWER_MEM >> 12) & POTAR_TA_MASK; + ios->pobar3 = (MPC83xx_PCI2_LOWER_MEM >> 12) & POBAR_BA_MASK; + ios->pocmr3 = POCMR_EN | POCMR_DST | + (((0xffffffff - (MPC83xx_PCI2_UPPER_MEM - + MPC83xx_PCI2_LOWER_MEM)) >> 12) & POCMR_CM_MASK); + + /* mapped to PCI2 IO space */ + ios->potar4 = (MPC83xx_PCI2_LOWER_IO >> 12) & POTAR_TA_MASK; + ios->pobar4 = (MPC83xx_PCI2_IO_BASE >> 12) & POBAR_BA_MASK; + ios->pocmr4 = POCMR_EN | POCMR_DST | POCMR_IO | + (((0xffffffff - (MPC83xx_PCI2_UPPER_IO - + MPC83xx_PCI2_LOWER_IO)) >> 12) & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl->pitar1 = 0x0; + pci_ctrl->pibar1 = 0x0; + pci_ctrl->piebar1 = 0x0; + pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_2G; + + /* + * Release PCI RST signal + */ + pci_ctrl->gcr = 0; + udelay(2000); + pci_ctrl->gcr = 1; + udelay(2000); + + reg16 = 0xff; + early_read_config_word(hose, hose->first_busno, 0, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + early_write_config_word(hose, hose->first_busno, 0, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + early_write_config_word(hose, hose->first_busno, 0, PCI_STATUS, 0xffff); + early_write_config_byte(hose, hose->first_busno, 0, PCI_LATENCY_TIMER, 0x80); + + iounmap(pci_ctrl); + iounmap(ios); +} + +/* + * PCI buses can be enabled only if SYS board combinates with PIB + * (Platform IO Board) board which provide 3 PCI slots. There is 2 PCI buses + * and 3 PCI slots, so people must configure the routes between them before + * enable PCI bus. This routes are under the control of PCA9555PW device which + * can be accessed via I2C bus 2 and are configured by firmware. Refer to + * Freescale to get more information about firmware configuration. + */ + +extern int mpc83xx_exclude_device(u_char bus, u_char devfn); +extern int mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, + unsigned char pin); +void __init +mpc83xx_setup_hose(void) +{ + u32 val32; + volatile immr_clk_t * clk; + struct pci_controller * hose1; +#ifdef CONFIG_MPC83xx_PCI2 + struct pci_controller * hose2; +#endif + bd_t * binfo = (bd_t *)__res; + + clk = ioremap(binfo->bi_immr_base + 0xA00, + sizeof(immr_clk_t)); + + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + val32 = clk->occr; + udelay(2000); + clk->occr = 0xff000000; + udelay(2000); + + iounmap(clk); + + hose1 = pcibios_alloc_controller(); + if(!hose1) + return; + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = mpc83xx_map_irq; + + hose1->bus_offset = 0; + hose1->first_busno = 0; + hose1->last_busno = 0xff; + + setup_indirect_pci(hose1, binfo->bi_immr_base + PCI1_CFG_ADDR_OFFSET, + binfo->bi_immr_base + PCI1_CFG_DATA_OFFSET); + hose1->set_cfg_type = 1; + + mpc83xx_setup_pci1(hose1); + + hose1->pci_mem_offset = MPC83xx_PCI1_MEM_OFFSET; + hose1->mem_space.start = MPC83xx_PCI1_LOWER_MEM; + hose1->mem_space.end = MPC83xx_PCI1_UPPER_MEM; + + hose1->io_base_phys = MPC83xx_PCI1_IO_BASE; + hose1->io_space.start = MPC83xx_PCI1_LOWER_IO; + hose1->io_space.end = MPC83xx_PCI1_UPPER_IO; +#ifdef CONFIG_MPC83xx_PCI2 + isa_io_base = (unsigned long)ioremap(MPC83xx_PCI1_IO_BASE, + MPC83xx_PCI1_IO_SIZE + MPC83xx_PCI2_IO_SIZE); +#else + isa_io_base = (unsigned long)ioremap(MPC83xx_PCI1_IO_BASE, + MPC83xx_PCI1_IO_SIZE); +#endif /* CONFIG_MPC83xx_PCI2 */ + hose1->io_base_virt = (void *)isa_io_base; + /* setup resources */ + pci_init_resource(&hose1->io_resource, + MPC83xx_PCI1_LOWER_IO, + MPC83xx_PCI1_UPPER_IO, + IORESOURCE_IO, "PCI host bridge 1"); + pci_init_resource(&hose1->mem_resources[0], + MPC83xx_PCI1_LOWER_MEM, + MPC83xx_PCI1_UPPER_MEM, + IORESOURCE_MEM, "PCI host bridge 1"); + + ppc_md.pci_exclude_device = mpc83xx_exclude_device; + hose1->last_busno = pciauto_bus_scan(hose1, hose1->first_busno); + +#ifdef CONFIG_MPC83xx_PCI2 + hose2 = pcibios_alloc_controller(); + if(!hose2) + return; + + hose2->bus_offset = hose1->last_busno + 1; + hose2->first_busno = hose1->last_busno + 1; + hose2->last_busno = 0xff; + setup_indirect_pci(hose2, binfo->bi_immr_base + PCI2_CFG_ADDR_OFFSET, + binfo->bi_immr_base + PCI2_CFG_DATA_OFFSET); + hose2->set_cfg_type = 1; + + mpc83xx_setup_pci2(hose2); + + hose2->pci_mem_offset = MPC83xx_PCI2_MEM_OFFSET; + hose2->mem_space.start = MPC83xx_PCI2_LOWER_MEM; + hose2->mem_space.end = MPC83xx_PCI2_UPPER_MEM; + + hose2->io_base_phys = MPC83xx_PCI2_IO_BASE; + hose2->io_space.start = MPC83xx_PCI2_LOWER_IO; + hose2->io_space.end = MPC83xx_PCI2_UPPER_IO; + hose2->io_base_virt = (void *)(isa_io_base + MPC83xx_PCI1_IO_SIZE); + /* setup resources */ + pci_init_resource(&hose2->io_resource, + MPC83xx_PCI2_LOWER_IO, + MPC83xx_PCI2_UPPER_IO, + IORESOURCE_IO, "PCI host bridge 2"); + pci_init_resource(&hose2->mem_resources[0], + MPC83xx_PCI2_LOWER_MEM, + MPC83xx_PCI2_UPPER_MEM, + IORESOURCE_MEM, "PCI host bridge 2"); + + hose2->last_busno = pciauto_bus_scan(hose2, hose2->first_busno); +#endif /* CONFIG_MPC83xx_PCI2 */ +} +#endif /*CONFIG_PCI*/ diff --git a/arch/ppc/syslib/ppc83xx_setup.h b/arch/ppc/syslib/ppc83xx_setup.h index 683f179b746c..c766c1a5f786 100644 --- a/arch/ppc/syslib/ppc83xx_setup.h +++ b/arch/ppc/syslib/ppc83xx_setup.h @@ -12,6 +12,14 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef __PPC_SYSLIB_PPC83XX_SETUP_H @@ -19,7 +27,6 @@ #include <linux/config.h> #include <linux/init.h> -#include <asm/ppcboot.h> extern unsigned long mpc83xx_find_end_of_memory(void) __init; extern long mpc83xx_time_init(void) __init; @@ -31,13 +38,11 @@ extern void mpc83xx_halt(void); extern void mpc83xx_setup_hose(void) __init; /* PCI config */ -#if 0 -#define PCI1_CFG_ADDR_OFFSET (FIXME) -#define PCI1_CFG_DATA_OFFSET (FIXME) +#define PCI1_CFG_ADDR_OFFSET (0x8300) +#define PCI1_CFG_DATA_OFFSET (0x8304) -#define PCI2_CFG_ADDR_OFFSET (FIXME) -#define PCI2_CFG_DATA_OFFSET (FIXME) -#endif +#define PCI2_CFG_ADDR_OFFSET (0x8380) +#define PCI2_CFG_DATA_OFFSET (0x8384) /* Serial Config */ #ifdef CONFIG_SERIAL_MANY_PORTS diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c index 879202352560..52ba0c68078d 100644 --- a/arch/ppc/syslib/ppc_sys.c +++ b/arch/ppc/syslib/ppc_sys.c @@ -6,6 +6,7 @@ * Maintainer: Kumar Gala <kumar.gala@freescale.com> * * Copyright 2005 Freescale Semiconductor Inc. + * Copyright 2005 MontaVista, Inc. by Vitaly Bordug <vbordug@ru.mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -35,10 +36,59 @@ void __init identify_ppc_sys_by_id(u32 id) void __init identify_ppc_sys_by_name(char *name) { - /* TODO */ + unsigned int i = 0; + while (ppc_sys_specs[i].ppc_sys_name[0]) + { + if (!strcmp(ppc_sys_specs[i].ppc_sys_name, name)) + break; + i++; + } + cur_ppc_sys_spec = &ppc_sys_specs[i]; return; } +static int __init count_sys_specs(void) +{ + int i = 0; + while (ppc_sys_specs[i].ppc_sys_name[0]) + i++; + return i; +} + +static int __init find_chip_by_name_and_id(char *name, u32 id) +{ + int ret = -1; + unsigned int i = 0; + unsigned int j = 0; + unsigned int dups = 0; + + unsigned char matched[count_sys_specs()]; + + while (ppc_sys_specs[i].ppc_sys_name[0]) { + if (!strcmp(ppc_sys_specs[i].ppc_sys_name, name)) + matched[j++] = i; + i++; + } + if (j != 0) { + for (i = 0; i < j; i++) { + if ((ppc_sys_specs[matched[i]].mask & id) == + ppc_sys_specs[matched[i]].value) { + ret = matched[i]; + dups++; + } + } + ret = (dups == 1) ? ret : (-1 * dups); + } + return ret; +} + +void __init identify_ppc_sys_by_name_and_id(char *name, u32 id) +{ + int i = find_chip_by_name_and_id(name, id); + BUG_ON(i < 0); + cur_ppc_sys_spec = &ppc_sys_specs[i]; +} + /* Update all memory resources by paddr, call before platform_device_register */ void __init ppc_sys_fixup_mem_resource(struct platform_device *pdev, phys_addr_t paddr) diff --git a/arch/ppc/syslib/pq2_devices.c b/arch/ppc/syslib/pq2_devices.c new file mode 100644 index 000000000000..1d3869768f96 --- /dev/null +++ b/arch/ppc/syslib/pq2_devices.c @@ -0,0 +1,389 @@ +/* + * arch/ppc/syslib/pq2_devices.c + * + * PQ2 Device descriptions + * + * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/ioport.h> +#include <asm/cpm2.h> +#include <asm/irq.h> +#include <asm/ppc_sys.h> + +struct platform_device ppc_sys_platform_devices[] = { + [MPC82xx_CPM_FCC1] = { + .name = "fsl-cpm-fcc", + .id = 1, + .num_resources = 3, + .resource = (struct resource[]) { + { + .name = "fcc_regs", + .start = 0x11300, + .end = 0x1131f, + .flags = IORESOURCE_MEM, + }, + { + .name = "fcc_pram", + .start = 0x8400, + .end = 0x84ff, + .flags = IORESOURCE_MEM, + }, + { + .start = SIU_INT_FCC1, + .end = SIU_INT_FCC1, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC82xx_CPM_FCC2] = { + .name = "fsl-cpm-fcc", + .id = 2, + .num_resources = 3, + .resource = (struct resource[]) { + { + .name = "fcc_regs", + .start = 0x11320, + .end = 0x1133f, + .flags = IORESOURCE_MEM, + }, + { + .name = "fcc_pram", + .start = 0x8500, + .end = 0x85ff, + .flags = IORESOURCE_MEM, + }, + { + .start = SIU_INT_FCC2, + .end = SIU_INT_FCC2, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC82xx_CPM_FCC3] = { + .name = "fsl-cpm-fcc", + .id = 3, + .num_resources = 3, + .resource = (struct resource[]) { + { + .name = "fcc_regs", + .start = 0x11340, + .end = 0x1135f, + .flags = IORESOURCE_MEM, + }, + { + .name = "fcc_pram", + .start = 0x8600, + .end = 0x86ff, + .flags = IORESOURCE_MEM, + }, + { + .start = SIU_INT_FCC3, + .end = SIU_INT_FCC3, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC82xx_CPM_I2C] = { + .name = "fsl-cpm-i2c", + .id = 1, + .num_resources = 3, + .resource = (struct resource[]) { + { + .name = "i2c_mem", + .start = 0x11860, + .end = 0x118BF, + .flags = IORESOURCE_MEM, + }, + { + .name = "i2c_pram", + .start = 0x8afc, + .end = 0x8afd, + .flags = IORESOURCE_MEM, + }, + { + .start = SIU_INT_I2C, + .end = SIU_INT_I2C, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC82xx_CPM_SCC1] = { + .name = "fsl-cpm-scc", + .id = 1, + .num_resources = 3, + .resource = (struct resource[]) { + { + .name = "scc_mem", + .start = 0x11A00, + .end = 0x11A1F, + .flags = IORESOURCE_MEM, + }, + { + .name = "scc_pram", + .start = 0x8000, + .end = 0x80ff, + .flags = IORESOURCE_MEM, + }, + { + .start = SIU_INT_SCC1, + .end = SIU_INT_SCC1, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC82xx_CPM_SCC2] = { + .name = "fsl-cpm-scc", + .id = 2, + .num_resources = 3, + .resource = (struct resource[]) { + { + .name = "scc_mem", + .start = 0x11A20, + .end = 0x11A3F, + .flags = IORESOURCE_MEM, + }, + { + .name = "scc_pram", + .start = 0x8100, + .end = 0x81ff, + .flags = IORESOURCE_MEM, + }, + { + .start = SIU_INT_SCC2, + .end = SIU_INT_SCC2, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC82xx_CPM_SCC3] = { + .name = "fsl-cpm-scc", + .id = 3, + .num_resources = 3, + .resource = (struct resource[]) { + { + .name = "scc_mem", + .start = 0x11A40, + .end = 0x11A5F, + .flags = IORESOURCE_MEM, + }, + { + .name = "scc_pram", + .start = 0x8200, + .end = 0x82ff, + .flags = IORESOURCE_MEM, + }, + { + .start = SIU_INT_SCC3, + .end = SIU_INT_SCC3, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC82xx_CPM_SCC4] = { + .name = "fsl-cpm-scc", + .id = 4, + .num_resources = 3, + .resource = (struct resource[]) { + { + .name = "scc_mem", + .start = 0x11A60, + .end = 0x11A7F, + .flags = IORESOURCE_MEM, + }, + { + .name = "scc_pram", + .start = 0x8300, + .end = 0x83ff, + .flags = IORESOURCE_MEM, + }, + { + .start = SIU_INT_SCC4, + .end = SIU_INT_SCC4, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC82xx_CPM_SPI] = { + .name = "fsl-cpm-spi", + .id = 1, + .num_resources = 3, + .resource = (struct resource[]) { + { + .name = "spi_mem", + .start = 0x11AA0, + .end = 0x11AFF, + .flags = IORESOURCE_MEM, + }, + { + .name = "spi_pram", + .start = 0x89fc, + .end = 0x89fd, + .flags = IORESOURCE_MEM, + }, + { + .start = SIU_INT_SPI, + .end = SIU_INT_SPI, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC82xx_CPM_MCC1] = { + .name = "fsl-cpm-mcc", + .id = 1, + .num_resources = 3, + .resource = (struct resource[]) { + { + .name = "mcc_mem", + .start = 0x11B30, + .end = 0x11B3F, + .flags = IORESOURCE_MEM, + }, + { + .name = "mcc_pram", + .start = 0x8700, + .end = 0x877f, + .flags = IORESOURCE_MEM, + }, + { + .start = SIU_INT_MCC1, + .end = SIU_INT_MCC1, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC82xx_CPM_MCC2] = { + .name = "fsl-cpm-mcc", + .id = 2, + .num_resources = 3, + .resource = (struct resource[]) { + { + .name = "mcc_mem", + .start = 0x11B50, + .end = 0x11B5F, + .flags = IORESOURCE_MEM, + }, + { + .name = "mcc_pram", + .start = 0x8800, + .end = 0x887f, + .flags = IORESOURCE_MEM, + }, + { + .start = SIU_INT_MCC2, + .end = SIU_INT_MCC2, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC82xx_CPM_SMC1] = { + .name = "fsl-cpm-smc", + .id = 1, + .num_resources = 3, + .resource = (struct resource[]) { + { + .name = "smc_mem", + .start = 0x11A80, + .end = 0x11A8F, + .flags = IORESOURCE_MEM, + }, + { + .name = "smc_pram", + .start = 0x87fc, + .end = 0x87fd, + .flags = IORESOURCE_MEM, + }, + { + .start = SIU_INT_SMC1, + .end = SIU_INT_SMC1, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC82xx_CPM_SMC2] = { + .name = "fsl-cpm-smc", + .id = 2, + .num_resources = 3, + .resource = (struct resource[]) { + { + .name = "smc_mem", + .start = 0x11A90, + .end = 0x11A9F, + .flags = IORESOURCE_MEM, + }, + { + .name = "smc_pram", + .start = 0x88fc, + .end = 0x88fd, + .flags = IORESOURCE_MEM, + }, + { + .start = SIU_INT_SMC2, + .end = SIU_INT_SMC2, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC82xx_CPM_USB] = { + .name = "fsl-cpm-usb", + .id = 1, + .num_resources = 3, + .resource = (struct resource[]) { + { + .name = "usb_mem", + .start = 0x11b60, + .end = 0x11b78, + .flags = IORESOURCE_MEM, + }, + { + .name = "usb_pram", + .start = 0x8b00, + .end = 0x8bff, + .flags = IORESOURCE_MEM, + }, + { + .start = SIU_INT_USB, + .end = SIU_INT_USB, + .flags = IORESOURCE_IRQ, + }, + + }, + }, + [MPC82xx_SEC1] = { + .name = "fsl-sec", + .id = 1, + .num_resources = 1, + .resource = (struct resource[]) { + { + .name = "sec_mem", + .start = 0x40000, + .end = 0x52fff, + .flags = IORESOURCE_MEM, + }, + }, + }, +}; + +static int __init mach_mpc82xx_fixup(struct platform_device *pdev) +{ + ppc_sys_fixup_mem_resource(pdev, CPM_MAP_ADDR); + return 0; +} + +static int __init mach_mpc82xx_init(void) +{ + if (ppc_md.progress) + ppc_md.progress("mach_mpc82xx_init:enter", 0); + ppc_sys_device_fixup = mach_mpc82xx_fixup; + return 0; +} + +postcore_initcall(mach_mpc82xx_init); diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c new file mode 100644 index 000000000000..7b6c9ebdb9e3 --- /dev/null +++ b/arch/ppc/syslib/pq2_sys.c @@ -0,0 +1,200 @@ +/* + * arch/ppc/syslib/pq2_devices.c + * + * PQ2 System descriptions + * + * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> + +#include <asm/ppc_sys.h> + +struct ppc_sys_spec *cur_ppc_sys_spec; +struct ppc_sys_spec ppc_sys_specs[] = { + /* below is a list of the 8260 family of processors */ + { + .ppc_sys_name = "8250", + .mask = 0x0000ff00, + .value = 0x00000000, + .num_devices = 12, + .device_list = (enum ppc_sys_devices[]) + { + MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3, + MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, + MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1, + MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, + } + }, + { + .ppc_sys_name = "8255", + .mask = 0x0000ff00, + .value = 0x00000000, + .num_devices = 11, + .device_list = (enum ppc_sys_devices[]) + { + MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1, + MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4, + MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, + MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, + } + }, + { + .ppc_sys_name = "8260", + .mask = 0x0000ff00, + .value = 0x00000000, + .num_devices = 12, + .device_list = (enum ppc_sys_devices[]) + { + MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3, + MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, + MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1, + MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, + } + }, + { + .ppc_sys_name = "8264", + .mask = 0x0000ff00, + .value = 0x00000000, + .num_devices = 12, + .device_list = (enum ppc_sys_devices[]) + { + MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3, + MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, + MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1, + MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, + } + }, + { + .ppc_sys_name = "8265", + .mask = 0x0000ff00, + .value = 0x00000000, + .num_devices = 12, + .device_list = (enum ppc_sys_devices[]) + { + MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3, + MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, + MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1, + MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, + } + }, + { + .ppc_sys_name = "8266", + .mask = 0x0000ff00, + .value = 0x00000000, + .num_devices = 12, + .device_list = (enum ppc_sys_devices[]) + { + MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3, + MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, + MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1, + MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, + } + }, + /* below is a list of the 8272 family of processors */ + { + .ppc_sys_name = "8247", + .mask = 0x0000ff00, + .value = 0x00000d00, + .num_devices = 10, + .device_list = (enum ppc_sys_devices[]) + { + MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1, + MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1, + MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, + MPC82xx_CPM_USB, + }, + }, + { + .ppc_sys_name = "8248", + .mask = 0x0000ff00, + .value = 0x00000c00, + .num_devices = 11, + .device_list = (enum ppc_sys_devices[]) + { + MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1, + MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1, + MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, + MPC82xx_CPM_USB, MPC82xx_SEC1, + }, + }, + { + .ppc_sys_name = "8271", + .mask = 0x0000ff00, + .value = 0x00000d00, + .num_devices = 10, + .device_list = (enum ppc_sys_devices[]) + { + MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1, + MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1, + MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, + MPC82xx_CPM_USB, + }, + }, + { + .ppc_sys_name = "8272", + .mask = 0x0000ff00, + .value = 0x00000c00, + .num_devices = 11, + .device_list = (enum ppc_sys_devices[]) + { + MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1, + MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1, + MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, + MPC82xx_CPM_USB, MPC82xx_SEC1, + }, + }, + /* below is a list of the 8280 family of processors */ + { + .ppc_sys_name = "8270", + .mask = 0x0000ff00, + .value = 0x00000a00, + .num_devices = 12, + .device_list = (enum ppc_sys_devices[]) + { + MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3, + MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, + MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1, + MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, + }, + }, + { + .ppc_sys_name = "8275", + .mask = 0x0000ff00, + .value = 0x00000a00, + .num_devices = 12, + .device_list = (enum ppc_sys_devices[]) + { + MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3, + MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, + MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1, + MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, + }, + }, + { + .ppc_sys_name = "8280", + .mask = 0x0000ff00, + .value = 0x00000a00, + .num_devices = 13, + .device_list = (enum ppc_sys_devices[]) + { + MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3, + MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, + MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2, + MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, + MPC82xx_CPM_I2C, + }, + }, + { + /* default match */ + .ppc_sys_name = "", + .mask = 0x00000000, + .value = 0x00000000, + }, +}; diff --git a/arch/ppc/syslib/prep_nvram.c b/arch/ppc/syslib/prep_nvram.c index 2bcf8a16d1c9..8599850ca772 100644 --- a/arch/ppc/syslib/prep_nvram.c +++ b/arch/ppc/syslib/prep_nvram.c @@ -15,7 +15,6 @@ #include <linux/ioport.h> #include <asm/sections.h> -#include <asm/segment.h> #include <asm/io.h> #include <asm/machdep.h> #include <asm/prep_nvram.h> diff --git a/arch/ppc/syslib/qspan_pci.c b/arch/ppc/syslib/qspan_pci.c index 57f4ed5e5ae1..0970b5d30391 100644 --- a/arch/ppc/syslib/qspan_pci.c +++ b/arch/ppc/syslib/qspan_pci.c @@ -94,7 +94,7 @@ #define mk_config_type1(bus, dev, offset) \ mk_config_addr(bus, dev, offset) | 1; -static spinlock_t pcibios_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(pcibios_lock); int qspan_pcibios_read_config_byte(unsigned char bus, unsigned char dev_fn, unsigned char offset, unsigned char *val) diff --git a/arch/ppc/syslib/xilinx_pic.c b/arch/ppc/syslib/xilinx_pic.c index e0bd66f0847a..2cbcad278cef 100644 --- a/arch/ppc/syslib/xilinx_pic.c +++ b/arch/ppc/syslib/xilinx_pic.c @@ -79,14 +79,11 @@ xilinx_intc_end(unsigned int irq) } static struct hw_interrupt_type xilinx_intc = { - "Xilinx Interrupt Controller", - NULL, - NULL, - xilinx_intc_enable, - xilinx_intc_disable, - xilinx_intc_disable_and_ack, - xilinx_intc_end, - 0 + .typename = "Xilinx Interrupt Controller", + .enable = xilinx_intc_enable, + .disable = xilinx_intc_disable, + .ack = xilinx_intc_disable_and_ack, + .end = xilinx_intc_end, }; int diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index 2ce87836c671..deca68ad644a 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -44,6 +44,10 @@ config SCHED_NO_NO_OMIT_FRAME_POINTER bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + default y + # We optimistically allocate largepages from the VM, so make the limit # large enough (16MB). This badly named config option is actually # max order + 1 @@ -302,12 +306,6 @@ config GENERIC_HARDIRQS bool default y -config MSCHUNKS - bool - depends on PPC_ISERIES - default y - - config PPC_RTAS bool depends on PPC_PSERIES || PPC_BPA @@ -350,13 +348,46 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. +source "fs/Kconfig.binfmt" + +config HOTPLUG_CPU + bool "Support for hot-pluggable CPUs" + depends on SMP && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC) + select HOTPLUG + ---help--- + Say Y here to be able to turn CPUs off and on. + + Say N if you are unsure. + +config PROC_DEVICETREE + bool "Support for Open Firmware device tree in /proc" + depends on !PPC_ISERIES + help + This option adds a device-tree directory under /proc which contains + an image of the device tree that the kernel copies from Open + Firmware. If unsure, say Y here. + +config CMDLINE_BOOL + bool "Default bootloader kernel arguments" + depends on !PPC_ISERIES + +config CMDLINE + string "Initial kernel command string" + depends on CMDLINE_BOOL + default "console=ttyS0,9600 console=tty0 root=/dev/sda2" + help + On some platforms, there is currently no way for the boot loader to + pass arguments to the kernel. For these platforms, you can supply + some command-line options at build time by entering them here. In + most cases you will need to specify the root device here. + endmenu config ISA_DMA_API bool default y -menu "General setup" +menu "Bus Options" config ISA bool @@ -389,45 +420,12 @@ config PCI_DOMAINS bool default PCI -source "fs/Kconfig.binfmt" - source "drivers/pci/Kconfig" -config HOTPLUG_CPU - bool "Support for hot-pluggable CPUs" - depends on SMP && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC) - select HOTPLUG - ---help--- - Say Y here to be able to turn CPUs off and on. - - Say N if you are unsure. - source "drivers/pcmcia/Kconfig" source "drivers/pci/hotplug/Kconfig" -config PROC_DEVICETREE - bool "Support for Open Firmware device tree in /proc" - depends on !PPC_ISERIES - help - This option adds a device-tree directory under /proc which contains - an image of the device tree that the kernel copies from Open - Firmware. If unsure, say Y here. - -config CMDLINE_BOOL - bool "Default bootloader kernel arguments" - depends on !PPC_ISERIES - -config CMDLINE - string "Initial kernel command string" - depends on CMDLINE_BOOL - default "console=ttyS0,9600 console=tty0 root=/dev/sda2" - help - On some platforms, there is currently no way for the boot loader to - pass arguments to the kernel. For these platforms, you can supply - some command-line options at build time by entering them here. In - most cases you will need to specify the root device here. - endmenu source "net/Kconfig" diff --git a/arch/ppc64/Kconfig.debug b/arch/ppc64/Kconfig.debug index 46b1ce58da3b..f16a5030527b 100644 --- a/arch/ppc64/Kconfig.debug +++ b/arch/ppc64/Kconfig.debug @@ -41,10 +41,19 @@ config XMON help Include in-kernel hooks for the xmon kernel monitor/debugger. Unless you are intending to debug the kernel, say N here. + Make sure to enable also CONFIG_BOOTX_TEXT on Macs. Otherwise + nothing will appear on the screen (xmon writes directly to the + framebuffer memory). + The cmdline option 'xmon' or 'xmon=early' will drop into xmon very + early during boot. 'xmon=on' will just enable the xmon debugger hooks. + 'xmon=off' will disable the debugger hooks if CONFIG_XMON_DEFAULT is set. config XMON_DEFAULT bool "Enable xmon by default" depends on XMON + help + xmon is normally disabled unless booted with 'xmon=on'. + Use 'xmon=off' to disable xmon init during runtime. config PPCDBG bool "Include PPCDBG realtime debugging" diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile index 731b84758331..17d2c1eac3b8 100644 --- a/arch/ppc64/Makefile +++ b/arch/ppc64/Makefile @@ -49,12 +49,14 @@ NM := $(NM) --synthetic endif -CHECKFLAGS += -m64 -D__powerpc__ +CHECKFLAGS += -m64 -D__powerpc__ -D__powerpc64__ LDFLAGS := -m elf64ppc LDFLAGS_vmlinux := -Bstatic -e $(KERNELLOAD) -Ttext $(KERNELLOAD) CFLAGS += -msoft-float -pipe -mminimal-toc -mtraceback=none \ -mcall-aixdesc +# Temporary hack until we have migrated to asm-powerpc +CPPFLAGS += -Iarch/$(ARCH)/include GCC_VERSION := $(call cc-version) GCC_BROKEN_VEC := $(shell if [ $(GCC_VERSION) -lt 0400 ] ; then echo "y"; fi ;) @@ -87,11 +89,12 @@ drivers-$(CONFIG_OPROFILE) += arch/ppc64/oprofile/ boot := arch/ppc64/boot -boottarget-$(CONFIG_PPC_PSERIES) := zImage zImage.initrd -boottarget-$(CONFIG_PPC_MAPLE) := zImage zImage.initrd -boottarget-$(CONFIG_PPC_ISERIES) := vmlinux.sminitrd vmlinux.initrd vmlinux.sm -boottarget-$(CONFIG_PPC_BPA) := zImage zImage.initrd -$(boottarget-y): vmlinux +boottargets-$(CONFIG_PPC_PSERIES) += zImage zImage.initrd +boottargets-$(CONFIG_PPC_PMAC) += zImage.vmode zImage.initrd.vmode +boottargets-$(CONFIG_PPC_MAPLE) += zImage zImage.initrd +boottargets-$(CONFIG_PPC_ISERIES) += vmlinux.sminitrd vmlinux.initrd vmlinux.sm +boottargets-$(CONFIG_PPC_BPA) += zImage zImage.initrd +$(boottargets-y): vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ bootimage-$(CONFIG_PPC_PSERIES) := $(boot)/zImage @@ -112,20 +115,21 @@ all: $(KBUILD_IMAGE) archclean: $(Q)$(MAKE) $(clean)=$(boot) + # Temporary hack until we have migrated to asm-powerpc + $(Q)rm -rf arch/$(ARCH)/include -prepare: include/asm-ppc64/offsets.h -arch/ppc64/kernel/asm-offsets.s: include/asm include/linux/version.h \ - include/config/MARKER - -include/asm-ppc64/offsets.h: arch/ppc64/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) +# Temporary hack until we have migrated to asm-powerpc +include/asm: arch/$(ARCH)/include/asm +arch/$(ARCH)/include/asm: + $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi + $(Q)ln -fsn $(srctree)/include/asm-powerpc arch/$(ARCH)/include/asm define archhelp - echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)' - echo ' zImage.initrd- Compressed kernel image with initrd attached,' - echo ' sourced from arch/$(ARCH)/boot/ramdisk.image.gz' - echo ' (arch/$(ARCH)/boot/zImage.initrd)' + echo ' zImage.vmode - Compressed kernel image (arch/$(ARCH)/boot/zImage.vmode)' + echo ' zImage.initrd.vmode - Compressed kernel image with initrd attached,' + echo ' sourced from arch/$(ARCH)/boot/ramdisk.image.gz' + echo ' (arch/$(ARCH)/boot/zImage.initrd.vmode)' + echo ' zImage - zImage for pSeries machines' + echo ' zImage.initrd - zImage with initrd for pSeries machines' endef - -CLEAN_FILES += include/asm-ppc64/offsets.h diff --git a/arch/ppc64/boot/Makefile b/arch/ppc64/boot/Makefile index 683b2d43c15f..33fdc8710891 100644 --- a/arch/ppc64/boot/Makefile +++ b/arch/ppc64/boot/Makefile @@ -22,8 +22,8 @@ HOSTCC := gcc -BOOTCFLAGS := $(HOSTCFLAGS) $(LINUXINCLUDE) -fno-builtin -BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional +BOOTCFLAGS := $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem $(shell $(CROSS32CC) -print-file-name=include) +BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc BOOTLFLAGS := -Ttext 0x00400000 -e _start -T $(srctree)/$(src)/zImage.lds OBJCOPYFLAGS := contents,alloc,load,readonly,data @@ -37,6 +37,9 @@ quiet_cmd_bootcc = BOOTCC $@ quiet_cmd_bootas = BOOTAS $@ cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $< +quiet_cmd_bootld = BOOTLD $@ + cmd_bootld = $(CROSS32LD) $(BOOTLFLAGS) -o $@ $(2) + $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c $(call if_changed_dep,bootcc) $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S @@ -53,7 +56,7 @@ src-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.c, $(section))) gz-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.gz, $(section))) hostprogs-y := addnote addRamDisk -targets += zImage zImage.initrd imagesize.c \ +targets += zImage.vmode zImage.initrd.vmode zImage zImage.initrd imagesize.c \ $(patsubst $(obj)/%,%, $(call obj-sec, $(required) $(initrd))) \ $(patsubst $(obj)/%,%, $(call src-sec, $(required) $(initrd))) \ $(patsubst $(obj)/%,%, $(call gz-sec, $(required) $(initrd))) \ @@ -63,7 +66,7 @@ extra-y := initrd.o quiet_cmd_ramdisk = RAMDISK $@ cmd_ramdisk = $(obj)/addRamDisk $(obj)/ramdisk.image.gz $< $@ -quiet_cmd_stripvm = STRIP $@ +quiet_cmd_stripvm = STRIP $@ cmd_stripvm = $(STRIP) -s $< -o $@ vmlinux.strip: vmlinux FORCE @@ -71,12 +74,20 @@ vmlinux.strip: vmlinux FORCE $(obj)/vmlinux.initrd: vmlinux.strip $(obj)/addRamDisk $(obj)/ramdisk.image.gz FORCE $(call if_changed,ramdisk) -addsection = $(CROSS32OBJCOPY) $(1) \ - --add-section=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $(1)))=$(patsubst %.o,%.gz, $(1)) \ - --set-section-flags=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $(1)))=$(OBJCOPYFLAGS) +quiet_cmd_addsection = ADDSEC $@ + cmd_addsection = $(CROSS32OBJCOPY) $@ \ + --add-section=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(patsubst %.o,%.gz, $@) \ + --set-section-flags=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(OBJCOPYFLAGS) + +quiet_cmd_imagesize = GENSIZE $@ + cmd_imagesize = ls -l vmlinux.strip | \ + awk '{printf "/* generated -- do not edit! */\n" "unsigned long vmlinux_filesize = %d;\n", $$5}' \ + > $(obj)/imagesize.c && \ + $(CROSS_COMPILE)nm -n vmlinux | tail -n 1 | \ + awk '{printf "unsigned long vmlinux_memsize = 0x%s;\n", substr($$1,8)}' >> $(obj)/imagesize.c -quiet_cmd_addnote = ADDNOTE $@ - cmd_addnote = $(CROSS32LD) $(BOOTLFLAGS) -o $@ $(obj-boot) && $(obj)/addnote $@ +quiet_cmd_addnote = ADDNOTE $@ + cmd_addnote = $(obj)/addnote $@ $(call gz-sec, $(required)): $(obj)/kernel-%.gz: % FORCE $(call if_changed,gzip) @@ -85,28 +96,30 @@ $(obj)/kernel-initrd.gz: $(obj)/ramdisk.image.gz cp -f $(obj)/ramdisk.image.gz $@ $(call src-sec, $(required) $(initrd)): $(obj)/kernel-%.c: $(obj)/kernel-%.gz FORCE - touch $@ + @touch $@ $(call obj-sec, $(required) $(initrd)): $(obj)/kernel-%.o: $(obj)/kernel-%.c FORCE $(call if_changed_dep,bootcc) - $(call addsection, $@) + $(call cmd,addsection) + +$(obj)/zImage.vmode: obj-boot += $(call obj-sec, $(required)) +$(obj)/zImage.vmode: $(call obj-sec, $(required)) $(obj-boot) FORCE + $(call cmd,bootld,$(obj-boot)) + +$(obj)/zImage.initrd.vmode: obj-boot += $(call obj-sec, $(required) $(initrd)) +$(obj)/zImage.initrd.vmode: $(call obj-sec, $(required) $(initrd)) $(obj-boot) FORCE + $(call cmd,bootld,$(obj-boot)) -$(obj)/zImage: obj-boot += $(call obj-sec, $(required)) -$(obj)/zImage: $(call obj-sec, $(required)) $(obj-boot) $(obj)/addnote FORCE +$(obj)/zImage: $(obj)/zImage.vmode $(obj)/addnote FORCE + @cp -f $< $@ $(call if_changed,addnote) -$(obj)/zImage.initrd: obj-boot += $(call obj-sec, $(required) $(initrd)) -$(obj)/zImage.initrd: $(call obj-sec, $(required) $(initrd)) $(obj-boot) $(obj)/addnote FORCE +$(obj)/zImage.initrd: $(obj)/zImage.initrd.vmode $(obj)/addnote FORCE + @cp -f $< $@ $(call if_changed,addnote) $(obj)/imagesize.c: vmlinux.strip - @echo Generating $@ - ls -l vmlinux.strip | \ - awk '{printf "/* generated -- do not edit! */\n" \ - "unsigned long vmlinux_filesize = %d;\n", $$5}' > $(obj)/imagesize.c - $(CROSS_COMPILE)nm -n vmlinux | tail -n 1 | \ - awk '{printf "unsigned long vmlinux_memsize = 0x%s;\n", substr($$1,8)}' \ - >> $(obj)/imagesize.c + $(call cmd,imagesize) install: $(CONFIGURE) $(BOOTIMAGE) sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" "$(BOOTIMAGE)" diff --git a/arch/ppc64/boot/addnote.c b/arch/ppc64/boot/addnote.c index 719663a694bb..8041a9845ab7 100644 --- a/arch/ppc64/boot/addnote.c +++ b/arch/ppc64/boot/addnote.c @@ -157,7 +157,7 @@ main(int ac, char **av) PUT_32BE(ns, strlen(arch) + 1); PUT_32BE(ns + 4, N_DESCR * 4); PUT_32BE(ns + 8, 0x1275); - strcpy(&buf[ns + 12], arch); + strcpy((char *) &buf[ns + 12], arch); ns += 12 + strlen(arch) + 1; for (i = 0; i < N_DESCR; ++i, ns += 4) PUT_32BE(ns, descr[i]); @@ -172,7 +172,7 @@ main(int ac, char **av) PUT_32BE(ns, strlen(rpaname) + 1); PUT_32BE(ns + 4, sizeof(rpanote)); PUT_32BE(ns + 8, 0x12759999); - strcpy(&buf[ns + 12], rpaname); + strcpy((char *) &buf[ns + 12], rpaname); ns += 12 + ROUNDUP(strlen(rpaname) + 1); for (i = 0; i < N_RPA_DESCR; ++i, ns += 4) PUT_32BE(ns, rpanote[i]); diff --git a/arch/ppc64/boot/crt0.S b/arch/ppc64/boot/crt0.S index 04d3e74cd72f..3861e7f9cf19 100644 --- a/arch/ppc64/boot/crt0.S +++ b/arch/ppc64/boot/crt0.S @@ -9,7 +9,7 @@ * NOTE: this code runs in 32 bit mode and is packaged as ELF32. */ -#include <asm/ppc_asm.h> +#include "ppc_asm.h" .text .globl _start diff --git a/arch/ppc64/boot/div64.S b/arch/ppc64/boot/div64.S index 38f7e466d7d6..722f360a32a9 100644 --- a/arch/ppc64/boot/div64.S +++ b/arch/ppc64/boot/div64.S @@ -13,7 +13,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ -#include <asm/ppc_asm.h> +#include "ppc_asm.h" .globl __div64_32 __div64_32: diff --git a/arch/ppc64/boot/elf.h b/arch/ppc64/boot/elf.h new file mode 100644 index 000000000000..d4828fcf1cb9 --- /dev/null +++ b/arch/ppc64/boot/elf.h @@ -0,0 +1,149 @@ +#ifndef _PPC_BOOT_ELF_H_ +#define _PPC_BOOT_ELF_H_ + +/* 32-bit ELF base types. */ +typedef unsigned int Elf32_Addr; +typedef unsigned short Elf32_Half; +typedef unsigned int Elf32_Off; +typedef signed int Elf32_Sword; +typedef unsigned int Elf32_Word; + +/* 64-bit ELF base types. */ +typedef unsigned long long Elf64_Addr; +typedef unsigned short Elf64_Half; +typedef signed short Elf64_SHalf; +typedef unsigned long long Elf64_Off; +typedef signed int Elf64_Sword; +typedef unsigned int Elf64_Word; +typedef unsigned long long Elf64_Xword; +typedef signed long long Elf64_Sxword; + +/* These constants are for the segment types stored in the image headers */ +#define PT_NULL 0 +#define PT_LOAD 1 +#define PT_DYNAMIC 2 +#define PT_INTERP 3 +#define PT_NOTE 4 +#define PT_SHLIB 5 +#define PT_PHDR 6 +#define PT_TLS 7 /* Thread local storage segment */ +#define PT_LOOS 0x60000000 /* OS-specific */ +#define PT_HIOS 0x6fffffff /* OS-specific */ +#define PT_LOPROC 0x70000000 +#define PT_HIPROC 0x7fffffff +#define PT_GNU_EH_FRAME 0x6474e550 + +#define PT_GNU_STACK (PT_LOOS + 0x474e551) + +/* These constants define the different elf file types */ +#define ET_NONE 0 +#define ET_REL 1 +#define ET_EXEC 2 +#define ET_DYN 3 +#define ET_CORE 4 +#define ET_LOPROC 0xff00 +#define ET_HIPROC 0xffff + +/* These constants define the various ELF target machines */ +#define EM_NONE 0 +#define EM_PPC 20 /* PowerPC */ +#define EM_PPC64 21 /* PowerPC64 */ + +#define EI_NIDENT 16 + +typedef struct elf32_hdr { + unsigned char e_ident[EI_NIDENT]; + Elf32_Half e_type; + Elf32_Half e_machine; + Elf32_Word e_version; + Elf32_Addr e_entry; /* Entry point */ + Elf32_Off e_phoff; + Elf32_Off e_shoff; + Elf32_Word e_flags; + Elf32_Half e_ehsize; + Elf32_Half e_phentsize; + Elf32_Half e_phnum; + Elf32_Half e_shentsize; + Elf32_Half e_shnum; + Elf32_Half e_shstrndx; +} Elf32_Ehdr; + +typedef struct elf64_hdr { + unsigned char e_ident[16]; /* ELF "magic number" */ + Elf64_Half e_type; + Elf64_Half e_machine; + Elf64_Word e_version; + Elf64_Addr e_entry; /* Entry point virtual address */ + Elf64_Off e_phoff; /* Program header table file offset */ + Elf64_Off e_shoff; /* Section header table file offset */ + Elf64_Word e_flags; + Elf64_Half e_ehsize; + Elf64_Half e_phentsize; + Elf64_Half e_phnum; + Elf64_Half e_shentsize; + Elf64_Half e_shnum; + Elf64_Half e_shstrndx; +} Elf64_Ehdr; + +/* These constants define the permissions on sections in the program + header, p_flags. */ +#define PF_R 0x4 +#define PF_W 0x2 +#define PF_X 0x1 + +typedef struct elf32_phdr { + Elf32_Word p_type; + Elf32_Off p_offset; + Elf32_Addr p_vaddr; + Elf32_Addr p_paddr; + Elf32_Word p_filesz; + Elf32_Word p_memsz; + Elf32_Word p_flags; + Elf32_Word p_align; +} Elf32_Phdr; + +typedef struct elf64_phdr { + Elf64_Word p_type; + Elf64_Word p_flags; + Elf64_Off p_offset; /* Segment file offset */ + Elf64_Addr p_vaddr; /* Segment virtual address */ + Elf64_Addr p_paddr; /* Segment physical address */ + Elf64_Xword p_filesz; /* Segment size in file */ + Elf64_Xword p_memsz; /* Segment size in memory */ + Elf64_Xword p_align; /* Segment alignment, file & memory */ +} Elf64_Phdr; + +#define EI_MAG0 0 /* e_ident[] indexes */ +#define EI_MAG1 1 +#define EI_MAG2 2 +#define EI_MAG3 3 +#define EI_CLASS 4 +#define EI_DATA 5 +#define EI_VERSION 6 +#define EI_OSABI 7 +#define EI_PAD 8 + +#define ELFMAG0 0x7f /* EI_MAG */ +#define ELFMAG1 'E' +#define ELFMAG2 'L' +#define ELFMAG3 'F' +#define ELFMAG "\177ELF" +#define SELFMAG 4 + +#define ELFCLASSNONE 0 /* EI_CLASS */ +#define ELFCLASS32 1 +#define ELFCLASS64 2 +#define ELFCLASSNUM 3 + +#define ELFDATANONE 0 /* e_ident[EI_DATA] */ +#define ELFDATA2LSB 1 +#define ELFDATA2MSB 2 + +#define EV_NONE 0 /* e_version, EI_VERSION */ +#define EV_CURRENT 1 +#define EV_NUM 2 + +#define ELFOSABI_NONE 0 +#define ELFOSABI_LINUX 3 + +#endif /* _PPC_BOOT_ELF_H_ */ diff --git a/arch/ppc64/boot/main.c b/arch/ppc64/boot/main.c index 199d9804f61c..f7ec19a2d0b0 100644 --- a/arch/ppc64/boot/main.c +++ b/arch/ppc64/boot/main.c @@ -8,38 +8,32 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ -#include "ppc32-types.h" +#include <stdarg.h> +#include <stddef.h> +#include "elf.h" +#include "page.h" +#include "string.h" +#include "stdio.h" +#include "prom.h" #include "zlib.h" -#include <linux/elf.h> -#include <linux/string.h> -#include <asm/processor.h> -#include <asm/page.h> - -extern void *finddevice(const char *); -extern int getprop(void *, const char *, void *, int); -extern void printf(const char *fmt, ...); -extern int sprintf(char *buf, const char *fmt, ...); -void gunzip(void *, int, unsigned char *, int *); -void *claim(unsigned int, unsigned int, unsigned int); -void flush_cache(void *, unsigned long); -void pause(void); -extern void exit(void); - -unsigned long strlen(const char *s); -void *memmove(void *dest, const void *src, unsigned long n); -void *memcpy(void *dest, const void *src, unsigned long n); + +static void gunzip(void *, int, unsigned char *, int *); +extern void flush_cache(void *, unsigned long); + /* Value picked to match that used by yaboot */ #define PROG_START 0x01400000 -#define RAM_END (256<<20) // Fixme: use OF */ +#define RAM_END (512<<20) // Fixme: use OF */ +#define ONE_MB 0x100000 -char *avail_ram; -char *begin_avail, *end_avail; -char *avail_high; -unsigned int heap_use; -unsigned int heap_max; +static char *avail_ram; +static char *begin_avail, *end_avail; +static char *avail_high; +static unsigned int heap_use; +static unsigned int heap_max; extern char _start[]; +extern char _end[]; extern char _vmlinux_start[]; extern char _vmlinux_end[]; extern char _initrd_start[]; @@ -52,9 +46,9 @@ struct addr_range { unsigned long size; unsigned long memsize; }; -struct addr_range vmlinux = {0, 0, 0}; -struct addr_range vmlinuz = {0, 0, 0}; -struct addr_range initrd = {0, 0, 0}; +static struct addr_range vmlinux = {0, 0, 0}; +static struct addr_range vmlinuz = {0, 0, 0}; +static struct addr_range initrd = {0, 0, 0}; static char scratch[128<<10]; /* 128kB of scratch space for gunzip */ @@ -64,22 +58,15 @@ typedef void (*kernel_entry_t)( unsigned long, void *); -int (*prom)(void *); - -void *chosen_handle; -void *stdin; -void *stdout; -void *stderr; - #undef DEBUG -static unsigned long claim_base = PROG_START; +static unsigned long claim_base; static unsigned long try_claim(unsigned long size) { unsigned long addr = 0; - for(; claim_base < RAM_END; claim_base += 0x100000) { + for(; claim_base < RAM_END; claim_base += ONE_MB) { #ifdef DEBUG printf(" trying: 0x%08lx\n\r", claim_base); #endif @@ -110,7 +97,26 @@ void start(unsigned long a1, unsigned long a2, void *promptr) if (getprop(chosen_handle, "stdin", &stdin, sizeof(stdin)) != 4) exit(); - printf("\n\rzImage starting: loaded at 0x%x\n\r", (unsigned)_start); + printf("\n\rzImage starting: loaded at 0x%lx\n\r", (unsigned long) _start); + + /* + * The first available claim_base must be above the end of the + * the loaded kernel wrapper file (_start to _end includes the + * initrd image if it is present) and rounded up to a nice + * 1 MB boundary for good measure. + */ + + claim_base = _ALIGN_UP((unsigned long)_end, ONE_MB); + +#if defined(PROG_START) + /* + * Maintain a "magic" minimum address. This keeps some older + * firmware platforms running. + */ + + if (claim_base < PROG_START) + claim_base = PROG_START; +#endif /* * Now we try to claim some memory for the kernel itself @@ -120,7 +126,7 @@ void start(unsigned long a1, unsigned long a2, void *promptr) * size... In practice we add 1Mb, that is enough, but we should really * consider fixing the Makefile to put a _raw_ kernel in there ! */ - vmlinux_memsize += 0x100000; + vmlinux_memsize += ONE_MB; printf("Allocating 0x%lx bytes for kernel ...\n\r", vmlinux_memsize); vmlinux.addr = try_claim(vmlinux_memsize); if (vmlinux.addr == 0) { @@ -277,7 +283,7 @@ void zfree(void *x, void *addr, unsigned nb) #define DEFLATED 8 -void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp) +static void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp) { z_stream s; int r, i, flags; diff --git a/arch/ppc64/boot/page.h b/arch/ppc64/boot/page.h new file mode 100644 index 000000000000..14eca30fef64 --- /dev/null +++ b/arch/ppc64/boot/page.h @@ -0,0 +1,34 @@ +#ifndef _PPC_BOOT_PAGE_H +#define _PPC_BOOT_PAGE_H +/* + * Copyright (C) 2001 PPC64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifdef __ASSEMBLY__ +#define ASM_CONST(x) x +#else +#define __ASM_CONST(x) x##UL +#define ASM_CONST(x) __ASM_CONST(x) +#endif + +/* PAGE_SHIFT determines the page size */ +#define PAGE_SHIFT 12 +#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +/* align addr on a size boundary - adjust address up/down if needed */ +#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1))) +#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1))) + +/* align addr on a size boundary - adjust address up if needed */ +#define _ALIGN(addr,size) _ALIGN_UP(addr,size) + +/* to align the pointer to the (next) page boundary */ +#define PAGE_ALIGN(addr) _ALIGN(addr, PAGE_SIZE) + +#endif /* _PPC_BOOT_PAGE_H */ diff --git a/arch/ppc64/boot/ppc32-types.h b/arch/ppc64/boot/ppc32-types.h deleted file mode 100644 index f7b8884f8f70..000000000000 --- a/arch/ppc64/boot/ppc32-types.h +++ /dev/null @@ -1,36 +0,0 @@ -#ifndef _PPC64_TYPES_H -#define _PPC64_TYPES_H - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -typedef __signed__ long long __s64; -typedef unsigned long long __u64; - -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long long s64; -typedef unsigned long long u64; - -typedef struct { - __u32 u[4]; -} __attribute((aligned(16))) __vector128; - -#define BITS_PER_LONG 32 - -typedef __vector128 vector128; - -#endif /* _PPC64_TYPES_H */ diff --git a/arch/ppc64/boot/ppc_asm.h b/arch/ppc64/boot/ppc_asm.h new file mode 100644 index 000000000000..1c2c2817f9b7 --- /dev/null +++ b/arch/ppc64/boot/ppc_asm.h @@ -0,0 +1,62 @@ +#ifndef _PPC64_PPC_ASM_H +#define _PPC64_PPC_ASM_H +/* + * + * Definitions used by various bits of low-level assembly code on PowerPC. + * + * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* Condition Register Bit Fields */ + +#define cr0 0 +#define cr1 1 +#define cr2 2 +#define cr3 3 +#define cr4 4 +#define cr5 5 +#define cr6 6 +#define cr7 7 + + +/* General Purpose Registers (GPRs) */ + +#define r0 0 +#define r1 1 +#define r2 2 +#define r3 3 +#define r4 4 +#define r5 5 +#define r6 6 +#define r7 7 +#define r8 8 +#define r9 9 +#define r10 10 +#define r11 11 +#define r12 12 +#define r13 13 +#define r14 14 +#define r15 15 +#define r16 16 +#define r17 17 +#define r18 18 +#define r19 19 +#define r20 20 +#define r21 21 +#define r22 22 +#define r23 23 +#define r24 24 +#define r25 25 +#define r26 26 +#define r27 27 +#define r28 28 +#define r29 29 +#define r30 30 +#define r31 31 + +#endif /* _PPC64_PPC_ASM_H */ diff --git a/arch/ppc64/boot/prom.c b/arch/ppc64/boot/prom.c index 5e48b80ff5a0..4bea2f4dcb06 100644 --- a/arch/ppc64/boot/prom.c +++ b/arch/ppc64/boot/prom.c @@ -7,43 +7,19 @@ * 2 of the License, or (at your option) any later version. */ #include <stdarg.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/ctype.h> - -extern __u32 __div64_32(unsigned long long *dividend, __u32 divisor); - -/* The unnecessary pointer compare is there - * to check for type safety (n must be 64bit) - */ -# define do_div(n,base) ({ \ - __u32 __base = (base); \ - __u32 __rem; \ - (void)(((typeof((n)) *)0) == ((unsigned long long *)0)); \ - if (((n) >> 32) == 0) { \ - __rem = (__u32)(n) % __base; \ - (n) = (__u32)(n) / __base; \ - } else \ - __rem = __div64_32(&(n), __base); \ - __rem; \ - }) +#include <stddef.h> +#include "string.h" +#include "stdio.h" +#include "prom.h" int (*prom)(void *); void *chosen_handle; + void *stdin; void *stdout; void *stderr; -void exit(void); -void *finddevice(const char *name); -int getprop(void *phandle, const char *name, void *buf, int buflen); -void chrpboot(int a1, int a2, void *prom); /* in main.c */ - -int printf(char *fmt, ...); - -/* there is no convenient header to get this from... -- paulus */ -extern unsigned long strlen(const char *); int write(void *handle, void *ptr, int nb) @@ -210,107 +186,6 @@ fputs(char *str, void *f) return write(f, str, n) == n? 0: -1; } -int -readchar(void) -{ - char ch; - - for (;;) { - switch (read(stdin, &ch, 1)) { - case 1: - return ch; - case -1: - printf("read(stdin) returned -1\r\n"); - return -1; - } - } -} - -static char line[256]; -static char *lineptr; -static int lineleft; - -int -getchar(void) -{ - int c; - - if (lineleft == 0) { - lineptr = line; - for (;;) { - c = readchar(); - if (c == -1 || c == 4) - break; - if (c == '\r' || c == '\n') { - *lineptr++ = '\n'; - putchar('\n'); - break; - } - switch (c) { - case 0177: - case '\b': - if (lineptr > line) { - putchar('\b'); - putchar(' '); - putchar('\b'); - --lineptr; - } - break; - case 'U' & 0x1F: - while (lineptr > line) { - putchar('\b'); - putchar(' '); - putchar('\b'); - --lineptr; - } - break; - default: - if (lineptr >= &line[sizeof(line) - 1]) - putchar('\a'); - else { - putchar(c); - *lineptr++ = c; - } - } - } - lineleft = lineptr - line; - lineptr = line; - } - if (lineleft == 0) - return -1; - --lineleft; - return *lineptr++; -} - - - -/* String functions lifted from lib/vsprintf.c and lib/ctype.c */ -unsigned char _ctype[] = { -_C,_C,_C,_C,_C,_C,_C,_C, /* 0-7 */ -_C,_C|_S,_C|_S,_C|_S,_C|_S,_C|_S,_C,_C, /* 8-15 */ -_C,_C,_C,_C,_C,_C,_C,_C, /* 16-23 */ -_C,_C,_C,_C,_C,_C,_C,_C, /* 24-31 */ -_S|_SP,_P,_P,_P,_P,_P,_P,_P, /* 32-39 */ -_P,_P,_P,_P,_P,_P,_P,_P, /* 40-47 */ -_D,_D,_D,_D,_D,_D,_D,_D, /* 48-55 */ -_D,_D,_P,_P,_P,_P,_P,_P, /* 56-63 */ -_P,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U, /* 64-71 */ -_U,_U,_U,_U,_U,_U,_U,_U, /* 72-79 */ -_U,_U,_U,_U,_U,_U,_U,_U, /* 80-87 */ -_U,_U,_U,_P,_P,_P,_P,_P, /* 88-95 */ -_P,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L, /* 96-103 */ -_L,_L,_L,_L,_L,_L,_L,_L, /* 104-111 */ -_L,_L,_L,_L,_L,_L,_L,_L, /* 112-119 */ -_L,_L,_L,_P,_P,_P,_P,_C, /* 120-127 */ -0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 128-143 */ -0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 144-159 */ -_S|_SP,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P, /* 160-175 */ -_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P, /* 176-191 */ -_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U, /* 192-207 */ -_U,_U,_U,_U,_U,_U,_U,_P,_U,_U,_U,_U,_U,_U,_U,_L, /* 208-223 */ -_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L, /* 224-239 */ -_L,_L,_L,_L,_L,_L,_L,_P,_L,_L,_L,_L,_L,_L,_L,_L}; /* 240-255 */ - size_t strnlen(const char * s, size_t count) { const char *sc; @@ -320,44 +195,30 @@ size_t strnlen(const char * s, size_t count) return sc - s; } -unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base) -{ - unsigned long result = 0,value; +extern unsigned int __div64_32(unsigned long long *dividend, + unsigned int divisor); - if (!base) { - base = 10; - if (*cp == '0') { - base = 8; - cp++; - if ((*cp == 'x') && isxdigit(cp[1])) { - cp++; - base = 16; - } - } - } - while (isxdigit(*cp) && - (value = isdigit(*cp) ? *cp-'0' : toupper(*cp)-'A'+10) < base) { - result = result*base + value; - cp++; - } - if (endp) - *endp = (char *)cp; - return result; -} - -long simple_strtol(const char *cp,char **endp,unsigned int base) -{ - if(*cp=='-') - return -simple_strtoul(cp+1,endp,base); - return simple_strtoul(cp,endp,base); -} +/* The unnecessary pointer compare is there + * to check for type safety (n must be 64bit) + */ +# define do_div(n,base) ({ \ + unsigned int __base = (base); \ + unsigned int __rem; \ + (void)(((typeof((n)) *)0) == ((unsigned long long *)0)); \ + if (((n) >> 32) == 0) { \ + __rem = (unsigned int)(n) % __base; \ + (n) = (unsigned int)(n) / __base; \ + } else \ + __rem = __div64_32(&(n), __base); \ + __rem; \ + }) static int skip_atoi(const char **s) { - int i=0; + int i, c; - while (isdigit(**s)) - i = i*10 + *((*s)++) - '0'; + for (i = 0; '0' <= (c = **s) && c <= '9'; ++*s) + i = i*10 + c - '0'; return i; } @@ -436,9 +297,6 @@ static char * number(char * str, unsigned long long num, int base, int size, int return str; } -/* Forward decl. needed for IP address printing stuff... */ -int sprintf(char * buf, const char *fmt, ...); - int vsprintf(char *buf, const char *fmt, va_list args) { int len; @@ -477,7 +335,7 @@ int vsprintf(char *buf, const char *fmt, va_list args) /* get field width */ field_width = -1; - if (isdigit(*fmt)) + if ('0' <= *fmt && *fmt <= '9') field_width = skip_atoi(&fmt); else if (*fmt == '*') { ++fmt; @@ -493,7 +351,7 @@ int vsprintf(char *buf, const char *fmt, va_list args) precision = -1; if (*fmt == '.') { ++fmt; - if (isdigit(*fmt)) + if ('0' <= *fmt && *fmt <= '9') precision = skip_atoi(&fmt); else if (*fmt == '*') { ++fmt; @@ -628,7 +486,7 @@ int sprintf(char * buf, const char *fmt, ...) static char sprint_buf[1024]; int -printf(char *fmt, ...) +printf(const char *fmt, ...) { va_list args; int n; diff --git a/arch/ppc64/boot/prom.h b/arch/ppc64/boot/prom.h new file mode 100644 index 000000000000..96ab5aec740c --- /dev/null +++ b/arch/ppc64/boot/prom.h @@ -0,0 +1,18 @@ +#ifndef _PPC_BOOT_PROM_H_ +#define _PPC_BOOT_PROM_H_ + +extern int (*prom) (void *); +extern void *chosen_handle; + +extern void *stdin; +extern void *stdout; +extern void *stderr; + +extern int write(void *handle, void *ptr, int nb); +extern int read(void *handle, void *ptr, int nb); +extern void exit(void); +extern void pause(void); +extern void *finddevice(const char *); +extern void *claim(unsigned long virt, unsigned long size, unsigned long align); +extern int getprop(void *phandle, const char *name, void *buf, int buflen); +#endif /* _PPC_BOOT_PROM_H_ */ diff --git a/arch/ppc64/boot/stdio.h b/arch/ppc64/boot/stdio.h new file mode 100644 index 000000000000..24bd3a8dee94 --- /dev/null +++ b/arch/ppc64/boot/stdio.h @@ -0,0 +1,16 @@ +#ifndef _PPC_BOOT_STDIO_H_ +#define _PPC_BOOT_STDIO_H_ + +extern int printf(const char *fmt, ...); + +extern int sprintf(char *buf, const char *fmt, ...); + +extern int vsprintf(char *buf, const char *fmt, va_list args); + +extern int putc(int c, void *f); +extern int putchar(int c); +extern int getchar(void); + +extern int fputs(char *str, void *f); + +#endif /* _PPC_BOOT_STDIO_H_ */ diff --git a/arch/ppc64/boot/string.S b/arch/ppc64/boot/string.S index ba5f2d21c9ea..7ade87ae7718 100644 --- a/arch/ppc64/boot/string.S +++ b/arch/ppc64/boot/string.S @@ -9,7 +9,7 @@ * NOTE: this code runs in 32 bit mode and is packaged as ELF32. */ -#include <asm/ppc_asm.h> +#include "ppc_asm.h" .text .globl strcpy diff --git a/arch/ppc64/boot/string.h b/arch/ppc64/boot/string.h new file mode 100644 index 000000000000..9289258bcbd6 --- /dev/null +++ b/arch/ppc64/boot/string.h @@ -0,0 +1,16 @@ +#ifndef _PPC_BOOT_STRING_H_ +#define _PPC_BOOT_STRING_H_ + +extern char *strcpy(char *dest, const char *src); +extern char *strncpy(char *dest, const char *src, size_t n); +extern char *strcat(char *dest, const char *src); +extern int strcmp(const char *s1, const char *s2); +extern size_t strlen(const char *s); +extern size_t strnlen(const char *s, size_t count); + +extern void *memset(void *s, int c, size_t n); +extern void *memmove(void *dest, const void *src, unsigned long n); +extern void *memcpy(void *dest, const void *src, unsigned long n); +extern int memcmp(const void *s1, const void *s2, size_t n); + +#endif /* _PPC_BOOT_STRING_H_ */ diff --git a/arch/ppc64/boot/zlib.c b/arch/ppc64/boot/zlib.c index 78837e884b8b..0d910cd2079d 100644 --- a/arch/ppc64/boot/zlib.c +++ b/arch/ppc64/boot/zlib.c @@ -107,7 +107,7 @@ extern void *memcpy(void *, const void *, unsigned long); /* Diagnostic functions */ #ifdef DEBUG_ZLIB -# include <stdio.h> +# include "stdio.h" # ifndef verbose # define verbose 0 # endif diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig index ab567741e80e..fc83d9330282 100644 --- a/arch/ppc64/configs/g5_defconfig +++ b/arch/ppc64/configs/g5_defconfig @@ -103,10 +103,10 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_PREEMPT_BKL is not set -CONFIG_HZ_100=y -# CONFIG_HZ_250 is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set -CONFIG_HZ=100 +CONFIG_HZ=250 CONFIG_GENERIC_HARDIRQS=y CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig index 394ba18b58c7..013d4e0e4003 100644 --- a/arch/ppc64/configs/iSeries_defconfig +++ b/arch/ppc64/configs/iSeries_defconfig @@ -94,12 +94,11 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_PREEMPT_BKL is not set -CONFIG_HZ_100=y -# CONFIG_HZ_250 is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set -CONFIG_HZ=100 +CONFIG_HZ=250 CONFIG_GENERIC_HARDIRQS=y -CONFIG_MSCHUNKS=y CONFIG_LPARCFG=y CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig index 2033fe663dbe..dd42892cd873 100644 --- a/arch/ppc64/configs/maple_defconfig +++ b/arch/ppc64/configs/maple_defconfig @@ -103,10 +103,10 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_PREEMPT_BKL is not set -CONFIG_HZ_100=y -# CONFIG_HZ_250 is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set -CONFIG_HZ=100 +CONFIG_HZ=250 CONFIG_GENERIC_HARDIRQS=y CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig index 297fd5229487..29f7b80b0efc 100644 --- a/arch/ppc64/configs/pSeries_defconfig +++ b/arch/ppc64/configs/pSeries_defconfig @@ -112,10 +112,10 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_PREEMPT_BKL is not set -CONFIG_HZ_100=y -# CONFIG_HZ_250 is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set -CONFIG_HZ=100 +CONFIG_HZ=250 CONFIG_EEH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_PPC_RTAS=y diff --git a/arch/ppc64/defconfig b/arch/ppc64/defconfig index c361e7727b7a..7cb4750bb7a9 100644 --- a/arch/ppc64/defconfig +++ b/arch/ppc64/defconfig @@ -114,10 +114,10 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_PREEMPT_BKL is not set -CONFIG_HZ_100=y -# CONFIG_HZ_250 is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set -CONFIG_HZ=100 +CONFIG_HZ=250 CONFIG_EEH=y CONFIG_GENERIC_HARDIRQS=y CONFIG_PPC_RTAS=y diff --git a/arch/ppc64/kernel/LparData.c b/arch/ppc64/kernel/LparData.c index 1c11031c838e..0a9c23ca2f0c 100644 --- a/arch/ppc64/kernel/LparData.c +++ b/arch/ppc64/kernel/LparData.c @@ -51,6 +51,17 @@ struct HvReleaseData hvReleaseData = { 0xf4, 0x4b, 0xf6, 0xf4 }, }; +/* + * The NACA. The first dword of the naca is required by the iSeries + * hypervisor to point to itVpdAreas. The hypervisor finds the NACA + * through the pointer in hvReleaseData. + */ +struct naca_struct naca = { + .xItVpdAreas = &itVpdAreas, + .xRamDisk = 0, + .xRamDiskSize = 0, +}; + extern void system_reset_iSeries(void); extern void machine_check_iSeries(void); extern void data_access_iSeries(void); @@ -214,29 +225,3 @@ struct ItVpdAreas itVpdAreas = { 0,0 } }; - -struct msChunks msChunks; -EXPORT_SYMBOL(msChunks); - -/* Depending on whether this is called from iSeries or pSeries setup - * code, the location of the msChunks struct may or may not have - * to be reloc'd, so we force the caller to do that for us by passing - * in a pointer to the structure. - */ -unsigned long -msChunks_alloc(unsigned long mem, unsigned long num_chunks, unsigned long chunk_size) -{ - unsigned long offset = reloc_offset(); - struct msChunks *_msChunks = PTRRELOC(&msChunks); - - _msChunks->num_chunks = num_chunks; - _msChunks->chunk_size = chunk_size; - _msChunks->chunk_shift = __ilog2(chunk_size); - _msChunks->chunk_mask = (1UL<<_msChunks->chunk_shift)-1; - - mem = _ALIGN(mem, sizeof(msChunks_entry)); - _msChunks->abs = (msChunks_entry *)(mem + offset); - mem += num_chunks * sizeof(msChunks_entry); - - return mem; -} diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index 2ecccb6b4f8c..ae60eb1193c6 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -11,7 +11,7 @@ obj-y := setup.o entry.o traps.o irq.o idle.o dma.o \ udbg.o binfmt_elf32.o sys_ppc32.o ioctl32.o \ ptrace32.o signal32.o rtc.o init_task.o \ lmb.o cputable.o cpu_setup_power4.o idle_power4.o \ - iommu.o sysfs.o vdso.o pmc.o + iommu.o sysfs.o vdso.o pmc.o firmware.o obj-y += vdso32/ vdso64/ obj-$(CONFIG_PPC_OF) += of_device.o @@ -31,7 +31,7 @@ obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o i8259.o prom_init.o prom.o obj-$(CONFIG_PPC_PSERIES) += pSeries_pci.o pSeries_lpar.o pSeries_hvCall.o \ pSeries_nvram.o rtasd.o ras.o pSeries_reconfig.o \ - pSeries_setup.o pSeries_iommu.o + pSeries_setup.o pSeries_iommu.o udbg_16550.o obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_iommu.o bpa_nvram.o \ bpa_iic.o spider-pic.o @@ -50,14 +50,19 @@ obj-$(CONFIG_LPARCFG) += lparcfg.o obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_HVCS) += hvcserver.o -obj-$(CONFIG_IBMVIO) += vio.o + +vio-obj-$(CONFIG_PPC_PSERIES) += pSeries_vio.o +vio-obj-$(CONFIG_PPC_ISERIES) += iSeries_vio.o +obj-$(CONFIG_IBMVIO) += vio.o $(vio-obj-y) obj-$(CONFIG_XICS) += xics.o obj-$(CONFIG_MPIC) += mpic.o obj-$(CONFIG_PPC_PMAC) += pmac_setup.o pmac_feature.o pmac_pci.o \ - pmac_time.o pmac_nvram.o pmac_low_i2c.o + pmac_time.o pmac_nvram.o pmac_low_i2c.o \ + udbg_scc.o -obj-$(CONFIG_PPC_MAPLE) += maple_setup.o maple_pci.o maple_time.o +obj-$(CONFIG_PPC_MAPLE) += maple_setup.o maple_pci.o maple_time.o \ + udbg_16550.o obj-$(CONFIG_U3_DART) += u3_iommu.o diff --git a/arch/ppc64/kernel/asm-offsets.c b/arch/ppc64/kernel/asm-offsets.c index 6f910fa2746f..1ff4fa05a973 100644 --- a/arch/ppc64/kernel/asm-offsets.c +++ b/arch/ppc64/kernel/asm-offsets.c @@ -95,7 +95,8 @@ int main(void) DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr)); DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id)); #ifdef CONFIG_HUGETLB_PAGE - DEFINE(PACAHTLBSEGS, offsetof(struct paca_struct, context.htlb_segs)); + DEFINE(PACALOWHTLBAREAS, offsetof(struct paca_struct, context.low_htlb_areas)); + DEFINE(PACAHIGHHTLBAREAS, offsetof(struct paca_struct, context.high_htlb_areas)); #endif /* CONFIG_HUGETLB_PAGE */ DEFINE(PACADEFAULTDECR, offsetof(struct paca_struct, default_decr)); DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen)); diff --git a/arch/ppc64/kernel/bpa_iic.c b/arch/ppc64/kernel/bpa_iic.c index c8f3dc3fad70..0aaa878e19d3 100644 --- a/arch/ppc64/kernel/bpa_iic.c +++ b/arch/ppc64/kernel/bpa_iic.c @@ -205,6 +205,18 @@ static struct iic_regs __iomem *find_iic(int cpu) } #ifdef CONFIG_SMP + +/* Use the highest interrupt priorities for IPI */ +static inline int iic_ipi_to_irq(int ipi) +{ + return IIC_IPI_OFFSET + IIC_NUM_IPIS - 1 - ipi; +} + +static inline int iic_irq_to_ipi(int irq) +{ + return IIC_NUM_IPIS - 1 - (irq - IIC_IPI_OFFSET); +} + void iic_setup_cpu(void) { out_be64(&__get_cpu_var(iic).regs->prio, 0xff); @@ -212,18 +224,20 @@ void iic_setup_cpu(void) void iic_cause_IPI(int cpu, int mesg) { - out_be64(&per_cpu(iic, cpu).regs->generate, mesg); + out_be64(&per_cpu(iic, cpu).regs->generate, (IIC_NUM_IPIS - 1 - mesg) << 4); } static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs) { - - smp_message_recv(irq - IIC_IPI_OFFSET, regs); + smp_message_recv(iic_irq_to_ipi(irq), regs); return IRQ_HANDLED; } -static void iic_request_ipi(int irq, const char *name) +static void iic_request_ipi(int ipi, const char *name) { + int irq; + + irq = iic_ipi_to_irq(ipi); /* IPIs are marked SA_INTERRUPT as they must run with irqs * disabled */ get_irq_desc(irq)->handler = &iic_pic; @@ -233,10 +247,10 @@ static void iic_request_ipi(int irq, const char *name) void iic_request_IPIs(void) { - iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_CALL_FUNCTION, "IPI-call"); - iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_RESCHEDULE, "IPI-resched"); + iic_request_ipi(PPC_MSG_CALL_FUNCTION, "IPI-call"); + iic_request_ipi(PPC_MSG_RESCHEDULE, "IPI-resched"); #ifdef CONFIG_DEBUGGER - iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_DEBUGGER_BREAK, "IPI-debug"); + iic_request_ipi(PPC_MSG_DEBUGGER_BREAK, "IPI-debug"); #endif /* CONFIG_DEBUGGER */ } #endif /* CONFIG_SMP */ diff --git a/arch/ppc64/kernel/btext.c b/arch/ppc64/kernel/btext.c index c53f079e9b77..b6fbfbe9032d 100644 --- a/arch/ppc64/kernel/btext.c +++ b/arch/ppc64/kernel/btext.c @@ -7,7 +7,6 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/init.h> -#include <linux/version.h> #include <asm/sections.h> #include <asm/prom.h> diff --git a/arch/ppc64/kernel/cpu_setup_power4.S b/arch/ppc64/kernel/cpu_setup_power4.S index 0482c063c26e..1fb673c511ff 100644 --- a/arch/ppc64/kernel/cpu_setup_power4.S +++ b/arch/ppc64/kernel/cpu_setup_power4.S @@ -12,10 +12,9 @@ #include <linux/config.h> #include <asm/processor.h> #include <asm/page.h> -#include <asm/ppc_asm.h> #include <asm/cputable.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/cache.h> _GLOBAL(__970_cpu_preinit) diff --git a/arch/ppc64/kernel/cputable.c b/arch/ppc64/kernel/cputable.c index 77cec42f9525..8831a28c3c4e 100644 --- a/arch/ppc64/kernel/cputable.c +++ b/arch/ppc64/kernel/cputable.c @@ -5,7 +5,7 @@ * * Modifications for ppc64: * Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com> - * + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/module.h> +#include <asm/oprofile_impl.h> #include <asm/cputable.h> struct cpu_spec* cur_cpu_spec = NULL; @@ -54,26 +55,32 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x00400000, .cpu_name = "POWER3 (630)", .cpu_features = CPU_FTR_SPLIT_ID_CACHE | - CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | - CPU_FTR_PMC8, + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR, .cpu_user_features = COMMON_USER_PPC64, .icache_bsize = 128, .dcache_bsize = 128, + .num_pmcs = 8, .cpu_setup = __setup_cpu_power3, - .firmware_features = COMMON_PPC64_FW, +#ifdef CONFIG_OPROFILE + .oprofile_cpu_type = "ppc64/power3", + .oprofile_model = &op_model_rs64, +#endif }, { /* Power3+ */ .pvr_mask = 0xffff0000, .pvr_value = 0x00410000, .cpu_name = "POWER3 (630+)", .cpu_features = CPU_FTR_SPLIT_ID_CACHE | - CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | - CPU_FTR_PMC8, + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR, .cpu_user_features = COMMON_USER_PPC64, .icache_bsize = 128, .dcache_bsize = 128, + .num_pmcs = 8, .cpu_setup = __setup_cpu_power3, - .firmware_features = COMMON_PPC64_FW, +#ifdef CONFIG_OPROFILE + .oprofile_cpu_type = "ppc64/power3", + .oprofile_model = &op_model_rs64, +#endif }, { /* Northstar */ .pvr_mask = 0xffff0000, @@ -81,12 +88,16 @@ struct cpu_spec cpu_specs[] = { .cpu_name = "RS64-II (northstar)", .cpu_features = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | - CPU_FTR_PMC8 | CPU_FTR_MMCRA | CPU_FTR_CTRL, + CPU_FTR_MMCRA | CPU_FTR_CTRL, .cpu_user_features = COMMON_USER_PPC64, .icache_bsize = 128, .dcache_bsize = 128, + .num_pmcs = 8, .cpu_setup = __setup_cpu_power3, - .firmware_features = COMMON_PPC64_FW, +#ifdef CONFIG_OPROFILE + .oprofile_cpu_type = "ppc64/rs64", + .oprofile_model = &op_model_rs64, +#endif }, { /* Pulsar */ .pvr_mask = 0xffff0000, @@ -94,12 +105,16 @@ struct cpu_spec cpu_specs[] = { .cpu_name = "RS64-III (pulsar)", .cpu_features = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | - CPU_FTR_PMC8 | CPU_FTR_MMCRA | CPU_FTR_CTRL, + CPU_FTR_MMCRA | CPU_FTR_CTRL, .cpu_user_features = COMMON_USER_PPC64, .icache_bsize = 128, .dcache_bsize = 128, + .num_pmcs = 8, .cpu_setup = __setup_cpu_power3, - .firmware_features = COMMON_PPC64_FW, +#ifdef CONFIG_OPROFILE + .oprofile_cpu_type = "ppc64/rs64", + .oprofile_model = &op_model_rs64, +#endif }, { /* I-star */ .pvr_mask = 0xffff0000, @@ -107,12 +122,16 @@ struct cpu_spec cpu_specs[] = { .cpu_name = "RS64-III (icestar)", .cpu_features = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | - CPU_FTR_PMC8 | CPU_FTR_MMCRA | CPU_FTR_CTRL, + CPU_FTR_MMCRA | CPU_FTR_CTRL, .cpu_user_features = COMMON_USER_PPC64, .icache_bsize = 128, .dcache_bsize = 128, + .num_pmcs = 8, .cpu_setup = __setup_cpu_power3, - .firmware_features = COMMON_PPC64_FW, +#ifdef CONFIG_OPROFILE + .oprofile_cpu_type = "ppc64/rs64", + .oprofile_model = &op_model_rs64, +#endif }, { /* S-star */ .pvr_mask = 0xffff0000, @@ -120,12 +139,16 @@ struct cpu_spec cpu_specs[] = { .cpu_name = "RS64-IV (sstar)", .cpu_features = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | - CPU_FTR_PMC8 | CPU_FTR_MMCRA | CPU_FTR_CTRL, + CPU_FTR_MMCRA | CPU_FTR_CTRL, .cpu_user_features = COMMON_USER_PPC64, .icache_bsize = 128, .dcache_bsize = 128, + .num_pmcs = 8, .cpu_setup = __setup_cpu_power3, - .firmware_features = COMMON_PPC64_FW, +#ifdef CONFIG_OPROFILE + .oprofile_cpu_type = "ppc64/rs64", + .oprofile_model = &op_model_rs64, +#endif }, { /* Power4 */ .pvr_mask = 0xffff0000, @@ -133,12 +156,16 @@ struct cpu_spec cpu_specs[] = { .cpu_name = "POWER4 (gp)", .cpu_features = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | - CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_PMC8 | CPU_FTR_MMCRA, + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_MMCRA, .cpu_user_features = COMMON_USER_PPC64, .icache_bsize = 128, .dcache_bsize = 128, + .num_pmcs = 8, .cpu_setup = __setup_cpu_power4, - .firmware_features = COMMON_PPC64_FW, +#ifdef CONFIG_OPROFILE + .oprofile_cpu_type = "ppc64/power4", + .oprofile_model = &op_model_rs64, +#endif }, { /* Power4+ */ .pvr_mask = 0xffff0000, @@ -146,12 +173,16 @@ struct cpu_spec cpu_specs[] = { .cpu_name = "POWER4+ (gq)", .cpu_features = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | - CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_PMC8 | CPU_FTR_MMCRA, + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_MMCRA, .cpu_user_features = COMMON_USER_PPC64, .icache_bsize = 128, .dcache_bsize = 128, + .num_pmcs = 8, .cpu_setup = __setup_cpu_power4, - .firmware_features = COMMON_PPC64_FW, +#ifdef CONFIG_OPROFILE + .oprofile_cpu_type = "ppc64/power4", + .oprofile_model = &op_model_power4, +#endif }, { /* PPC970 */ .pvr_mask = 0xffff0000, @@ -160,13 +191,17 @@ struct cpu_spec cpu_specs[] = { .cpu_features = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | - CPU_FTR_CAN_NAP | CPU_FTR_PMC8 | CPU_FTR_MMCRA, + CPU_FTR_CAN_NAP | CPU_FTR_MMCRA, .cpu_user_features = COMMON_USER_PPC64 | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, + .num_pmcs = 8, .cpu_setup = __setup_cpu_ppc970, - .firmware_features = COMMON_PPC64_FW, +#ifdef CONFIG_OPROFILE + .oprofile_cpu_type = "ppc64/970", + .oprofile_model = &op_model_power4, +#endif }, { /* PPC970FX */ .pvr_mask = 0xffff0000, @@ -175,13 +210,17 @@ struct cpu_spec cpu_specs[] = { .cpu_features = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | - CPU_FTR_CAN_NAP | CPU_FTR_PMC8 | CPU_FTR_MMCRA, + CPU_FTR_CAN_NAP | CPU_FTR_MMCRA, .cpu_user_features = COMMON_USER_PPC64 | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, + .num_pmcs = 8, .cpu_setup = __setup_cpu_ppc970, - .firmware_features = COMMON_PPC64_FW, +#ifdef CONFIG_OPROFILE + .oprofile_cpu_type = "ppc64/970", + .oprofile_model = &op_model_power4, +#endif }, { /* PPC970MP */ .pvr_mask = 0xffff0000, @@ -190,13 +229,16 @@ struct cpu_spec cpu_specs[] = { .cpu_features = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | - CPU_FTR_CAN_NAP | CPU_FTR_PMC8 | CPU_FTR_MMCRA, + CPU_FTR_CAN_NAP | CPU_FTR_MMCRA, .cpu_user_features = COMMON_USER_PPC64 | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, .cpu_setup = __setup_cpu_ppc970, - .firmware_features = COMMON_PPC64_FW, +#ifdef CONFIG_OPROFILE + .oprofile_cpu_type = "ppc64/970", + .oprofile_model = &op_model_power4, +#endif }, { /* Power5 */ .pvr_mask = 0xffff0000, @@ -210,8 +252,12 @@ struct cpu_spec cpu_specs[] = { .cpu_user_features = COMMON_USER_PPC64, .icache_bsize = 128, .dcache_bsize = 128, + .num_pmcs = 6, .cpu_setup = __setup_cpu_power4, - .firmware_features = COMMON_PPC64_FW, +#ifdef CONFIG_OPROFILE + .oprofile_cpu_type = "ppc64/power5", + .oprofile_model = &op_model_power4, +#endif }, { /* Power5 */ .pvr_mask = 0xffff0000, @@ -225,8 +271,12 @@ struct cpu_spec cpu_specs[] = { .cpu_user_features = COMMON_USER_PPC64, .icache_bsize = 128, .dcache_bsize = 128, + .num_pmcs = 6, .cpu_setup = __setup_cpu_power4, - .firmware_features = COMMON_PPC64_FW, +#ifdef CONFIG_OPROFILE + .oprofile_cpu_type = "ppc64/power5", + .oprofile_model = &op_model_power4, +#endif }, { /* BE DD1.x */ .pvr_mask = 0xffff0000, @@ -241,7 +291,6 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .cpu_setup = __setup_cpu_be, - .firmware_features = COMMON_PPC64_FW, }, { /* default match */ .pvr_mask = 0x00000000, @@ -253,30 +302,7 @@ struct cpu_spec cpu_specs[] = { .cpu_user_features = COMMON_USER_PPC64, .icache_bsize = 128, .dcache_bsize = 128, + .num_pmcs = 6, .cpu_setup = __setup_cpu_power4, - .firmware_features = COMMON_PPC64_FW, } }; - -firmware_feature_t firmware_features_table[FIRMWARE_MAX_FEATURES] = { - {FW_FEATURE_PFT, "hcall-pft"}, - {FW_FEATURE_TCE, "hcall-tce"}, - {FW_FEATURE_SPRG0, "hcall-sprg0"}, - {FW_FEATURE_DABR, "hcall-dabr"}, - {FW_FEATURE_COPY, "hcall-copy"}, - {FW_FEATURE_ASR, "hcall-asr"}, - {FW_FEATURE_DEBUG, "hcall-debug"}, - {FW_FEATURE_PERF, "hcall-perf"}, - {FW_FEATURE_DUMP, "hcall-dump"}, - {FW_FEATURE_INTERRUPT, "hcall-interrupt"}, - {FW_FEATURE_MIGRATE, "hcall-migrate"}, - {FW_FEATURE_PERFMON, "hcall-perfmon"}, - {FW_FEATURE_CRQ, "hcall-crq"}, - {FW_FEATURE_VIO, "hcall-vio"}, - {FW_FEATURE_RDMA, "hcall-rdma"}, - {FW_FEATURE_LLAN, "hcall-lLAN"}, - {FW_FEATURE_BULK, "hcall-bulk"}, - {FW_FEATURE_XDABR, "hcall-xdabr"}, - {FW_FEATURE_MULTITCE, "hcall-multi-tce"}, - {FW_FEATURE_SPLPAR, "hcall-splpar"}, -}; diff --git a/arch/ppc64/kernel/eeh.c b/arch/ppc64/kernel/eeh.c index af5272fedadf..ba93fd731222 100644 --- a/arch/ppc64/kernel/eeh.c +++ b/arch/ppc64/kernel/eeh.c @@ -202,10 +202,9 @@ static void pci_addr_cache_print(struct pci_io_addr_cache *cache) while (n) { struct pci_io_addr_range *piar; piar = rb_entry(n, struct pci_io_addr_range, rb_node); - printk(KERN_DEBUG "PCI: %s addr range %d [%lx-%lx]: %s %s\n", + printk(KERN_DEBUG "PCI: %s addr range %d [%lx-%lx]: %s\n", (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", cnt, - piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev), - pci_pretty_name(piar->pcidev)); + piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev)); cnt++; n = rb_next(n); } @@ -255,22 +254,24 @@ pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo, static void __pci_addr_cache_insert_device(struct pci_dev *dev) { struct device_node *dn; + struct pci_dn *pdn; int i; int inserted = 0; dn = pci_device_to_OF_node(dev); if (!dn) { - printk(KERN_WARNING "PCI: no pci dn found for dev=%s %s\n", - pci_name(dev), pci_pretty_name(dev)); + printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", + pci_name(dev)); return; } /* Skip any devices for which EEH is not enabled. */ - if (!(dn->eeh_mode & EEH_MODE_SUPPORTED) || - dn->eeh_mode & EEH_MODE_NOCHECK) { + pdn = dn->data; + if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || + pdn->eeh_mode & EEH_MODE_NOCHECK) { #ifdef DEBUG - printk(KERN_INFO "PCI: skip building address cache for=%s %s\n", - pci_name(dev), pci_pretty_name(dev)); + printk(KERN_INFO "PCI: skip building address cache for=%s\n", + pci_name(dev)); #endif return; } @@ -416,6 +417,7 @@ int eeh_unregister_notifier(struct notifier_block *nb) static int read_slot_reset_state(struct device_node *dn, int rets[]) { int token, outputs; + struct pci_dn *pdn = dn->data; if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) { token = ibm_read_slot_reset_state2; @@ -425,8 +427,8 @@ static int read_slot_reset_state(struct device_node *dn, int rets[]) outputs = 3; } - return rtas_call(token, 3, outputs, rets, dn->eeh_config_addr, - BUID_HI(dn->phb->buid), BUID_LO(dn->phb->buid)); + return rtas_call(token, 3, outputs, rets, pdn->eeh_config_addr, + BUID_HI(pdn->phb->buid), BUID_LO(pdn->phb->buid)); } /** @@ -447,12 +449,12 @@ static void eeh_panic(struct pci_dev *dev, int reset_state) * in light of potential corruption, we can use it here. */ if (panic_on_oops) - panic("EEH: MMIO failure (%d) on device:%s %s\n", reset_state, - pci_name(dev), pci_pretty_name(dev)); + panic("EEH: MMIO failure (%d) on device:%s\n", reset_state, + pci_name(dev)); else { __get_cpu_var(ignored_failures)++; - printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s %s\n", - reset_state, pci_name(dev), pci_pretty_name(dev)); + printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n", + reset_state, pci_name(dev)); } } @@ -482,8 +484,8 @@ static void eeh_event_handler(void *dummy) break; printk(KERN_INFO "EEH: MMIO failure (%d), notifiying device " - "%s %s\n", event->reset_state, - pci_name(event->dev), pci_pretty_name(event->dev)); + "%s\n", event->reset_state, + pci_name(event->dev)); atomic_set(&eeh_fail_count, 0); notifier_call_chain (&eeh_notifier_chain, @@ -535,6 +537,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) unsigned long flags; int rc, reset_state; struct eeh_event *event; + struct pci_dn *pdn; __get_cpu_var(total_mmio_ffs)++; @@ -543,14 +546,15 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) if (!dn) return 0; + pdn = dn->data; /* Access to IO BARs might get this far and still not want checking. */ - if (!(dn->eeh_mode & EEH_MODE_SUPPORTED) || - dn->eeh_mode & EEH_MODE_NOCHECK) { + if (!pdn->eeh_capable || !(pdn->eeh_mode & EEH_MODE_SUPPORTED) || + pdn->eeh_mode & EEH_MODE_NOCHECK) { return 0; } - if (!dn->eeh_config_addr) { + if (!pdn->eeh_config_addr) { return 0; } @@ -558,7 +562,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) * If we already have a pending isolation event for this * slot, we know it's bad already, we don't need to check... */ - if (dn->eeh_mode & EEH_MODE_ISOLATED) { + if (pdn->eeh_mode & EEH_MODE_ISOLATED) { atomic_inc(&eeh_fail_count); if (atomic_read(&eeh_fail_count) >= EEH_MAX_FAILS) { /* re-read the slot reset state */ @@ -583,7 +587,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) } /* prevent repeated reports of this failure */ - dn->eeh_mode |= EEH_MODE_ISOLATED; + pdn->eeh_mode |= EEH_MODE_ISOLATED; reset_state = rets[0]; @@ -591,9 +595,9 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) memset(slot_errbuf, 0, eeh_error_buf_size); rc = rtas_call(ibm_slot_error_detail, - 8, 1, NULL, dn->eeh_config_addr, - BUID_HI(dn->phb->buid), - BUID_LO(dn->phb->buid), NULL, 0, + 8, 1, NULL, pdn->eeh_config_addr, + BUID_HI(pdn->phb->buid), + BUID_LO(pdn->phb->buid), NULL, 0, virt_to_phys(slot_errbuf), eeh_error_buf_size, 1 /* Temporary Error */); @@ -680,8 +684,9 @@ static void *early_enable_eeh(struct device_node *dn, void *data) u32 *device_id = (u32 *)get_property(dn, "device-id", NULL); u32 *regs; int enable; + struct pci_dn *pdn = dn->data; - dn->eeh_mode = 0; + pdn->eeh_mode = 0; if (status && strcmp(status, "ok") != 0) return NULL; /* ignore devices with bad status */ @@ -692,7 +697,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data) /* There is nothing to check on PCI to ISA bridges */ if (dn->type && !strcmp(dn->type, "isa")) { - dn->eeh_mode |= EEH_MODE_NOCHECK; + pdn->eeh_mode |= EEH_MODE_NOCHECK; return NULL; } @@ -709,7 +714,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data) enable = 0; if (!enable) - dn->eeh_mode |= EEH_MODE_NOCHECK; + pdn->eeh_mode |= EEH_MODE_NOCHECK; /* Ok... see if this device supports EEH. Some do, some don't, * and the only way to find out is to check each and every one. */ @@ -722,8 +727,8 @@ static void *early_enable_eeh(struct device_node *dn, void *data) EEH_ENABLE); if (ret == 0) { eeh_subsystem_enabled = 1; - dn->eeh_mode |= EEH_MODE_SUPPORTED; - dn->eeh_config_addr = regs[0]; + pdn->eeh_mode |= EEH_MODE_SUPPORTED; + pdn->eeh_config_addr = regs[0]; #ifdef DEBUG printk(KERN_DEBUG "EEH: %s: eeh enabled\n", dn->full_name); #endif @@ -731,10 +736,11 @@ static void *early_enable_eeh(struct device_node *dn, void *data) /* This device doesn't support EEH, but it may have an * EEH parent, in which case we mark it as supported. */ - if (dn->parent && (dn->parent->eeh_mode & EEH_MODE_SUPPORTED)) { + if (dn->parent && dn->parent->data + && (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) { /* Parent supports EEH. */ - dn->eeh_mode |= EEH_MODE_SUPPORTED; - dn->eeh_config_addr = dn->parent->eeh_config_addr; + pdn->eeh_mode |= EEH_MODE_SUPPORTED; + pdn->eeh_config_addr = PCI_DN(dn->parent)->eeh_config_addr; return NULL; } } @@ -791,11 +797,13 @@ void __init eeh_init(void) for (phb = of_find_node_by_name(NULL, "pci"); phb; phb = of_find_node_by_name(phb, "pci")) { unsigned long buid; + struct pci_dn *pci; buid = get_phb_buid(phb); - if (buid == 0) + if (buid == 0 || phb->data == NULL) continue; + pci = phb->data; info.buid_lo = BUID_LO(buid); info.buid_hi = BUID_HI(buid); traverse_pci_devices(phb, early_enable_eeh, &info); @@ -824,9 +832,9 @@ void eeh_add_device_early(struct device_node *dn) struct pci_controller *phb; struct eeh_early_enable_info info; - if (!dn) + if (!dn || !dn->data) return; - phb = dn->phb; + phb = PCI_DN(dn)->phb; if (NULL == phb || 0 == phb->buid) { printk(KERN_WARNING "EEH: Expected buid but found none\n"); return; @@ -851,8 +859,7 @@ void eeh_add_device_late(struct pci_dev *dev) return; #ifdef DEBUG - printk(KERN_DEBUG "EEH: adding device %s %s\n", pci_name(dev), - pci_pretty_name(dev)); + printk(KERN_DEBUG "EEH: adding device %s\n", pci_name(dev)); #endif pci_addr_cache_insert_device (dev); @@ -873,8 +880,7 @@ void eeh_remove_device(struct pci_dev *dev) /* Unregister the device with the EEH/PCI address search system */ #ifdef DEBUG - printk(KERN_DEBUG "EEH: remove device %s %s\n", pci_name(dev), - pci_pretty_name(dev)); + printk(KERN_DEBUG "EEH: remove device %s\n", pci_name(dev)); #endif pci_addr_cache_remove_device(dev); } diff --git a/arch/ppc64/kernel/entry.S b/arch/ppc64/kernel/entry.S index 14cd56ac40dd..e8c0bbf4d000 100644 --- a/arch/ppc64/kernel/entry.S +++ b/arch/ppc64/kernel/entry.S @@ -28,7 +28,7 @@ #include <asm/mmu.h> #include <asm/thread_info.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/cputable.h> #ifdef CONFIG_PPC_ISERIES @@ -410,15 +410,14 @@ BEGIN_FTR_SECTION cmpd cr1,r6,r9 /* or is new ESID the same as current ESID? */ cror eq,4*cr1+eq,eq beq 2f /* if yes, don't slbie it */ - oris r0,r6,0x0800 /* set C (class) bit */ /* Bolt in the new stack SLB entry */ ld r7,KSP_VSID(r4) /* Get new stack's VSID */ - oris r6,r6,(SLB_ESID_V)@h - ori r6,r6,(SLB_NUM_BOLTED-1)@l - slbie r0 - slbie r0 /* Workaround POWER5 < DD2.1 issue */ - slbmte r7,r6 + oris r0,r6,(SLB_ESID_V)@h + ori r0,r0,(SLB_NUM_BOLTED-1)@l + slbie r6 + slbie r6 /* Workaround POWER5 < DD2.1 issue */ + slbmte r7,r0 isync 2: diff --git a/arch/ppc64/kernel/firmware.c b/arch/ppc64/kernel/firmware.c new file mode 100644 index 000000000000..d8432c0fb27d --- /dev/null +++ b/arch/ppc64/kernel/firmware.c @@ -0,0 +1,47 @@ +/* + * arch/ppc64/kernel/firmware.c + * + * Extracted from cputable.c + * + * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * Modifications for ppc64: + * Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com> + * Copyright (C) 2005 Stephen Rothwell, IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/config.h> + +#include <asm/firmware.h> + +unsigned long ppc64_firmware_features; + +#ifdef CONFIG_PPC_PSERIES +firmware_feature_t firmware_features_table[FIRMWARE_MAX_FEATURES] = { + {FW_FEATURE_PFT, "hcall-pft"}, + {FW_FEATURE_TCE, "hcall-tce"}, + {FW_FEATURE_SPRG0, "hcall-sprg0"}, + {FW_FEATURE_DABR, "hcall-dabr"}, + {FW_FEATURE_COPY, "hcall-copy"}, + {FW_FEATURE_ASR, "hcall-asr"}, + {FW_FEATURE_DEBUG, "hcall-debug"}, + {FW_FEATURE_PERF, "hcall-perf"}, + {FW_FEATURE_DUMP, "hcall-dump"}, + {FW_FEATURE_INTERRUPT, "hcall-interrupt"}, + {FW_FEATURE_MIGRATE, "hcall-migrate"}, + {FW_FEATURE_PERFMON, "hcall-perfmon"}, + {FW_FEATURE_CRQ, "hcall-crq"}, + {FW_FEATURE_VIO, "hcall-vio"}, + {FW_FEATURE_RDMA, "hcall-rdma"}, + {FW_FEATURE_LLAN, "hcall-lLAN"}, + {FW_FEATURE_BULK, "hcall-bulk"}, + {FW_FEATURE_XDABR, "hcall-xdabr"}, + {FW_FEATURE_MULTITCE, "hcall-multi-tce"}, + {FW_FEATURE_SPLPAR, "hcall-splpar"}, +}; +#endif diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S index accaa052d31f..58c314738c99 100644 --- a/arch/ppc64/kernel/head.S +++ b/arch/ppc64/kernel/head.S @@ -23,17 +23,14 @@ * 2 of the License, or (at your option) any later version. */ -#define SECONDARY_PROCESSORS - #include <linux/config.h> #include <linux/threads.h> #include <asm/processor.h> #include <asm/page.h> #include <asm/mmu.h> -#include <asm/naca.h> #include <asm/systemcfg.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/bug.h> #include <asm/cputable.h> #include <asm/setup.h> @@ -45,18 +42,13 @@ #endif /* - * hcall interface to pSeries LPAR - */ -#define H_SET_ASR 0x30 - -/* * We layout physical memory as follows: * 0x0000 - 0x00ff : Secondary processor spin code * 0x0100 - 0x2fff : pSeries Interrupt prologs - * 0x3000 - 0x3fff : Interrupt support - * 0x4000 - 0x4fff : NACA - * 0x6000 : iSeries and common interrupt prologs - * 0x9000 - 0x9fff : Initial segment table + * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs + * 0x6000 - 0x6fff : Initial (CPU0) segment table + * 0x7000 - 0x7fff : FWNMI data area + * 0x8000 - : Early init and support code */ /* @@ -94,6 +86,7 @@ END_FTR_SECTION(0, 1) /* Catch branch to 0 in real mode */ trap + #ifdef CONFIG_PPC_ISERIES /* * At offset 0x20, there is a pointer to iSeries LPAR data. @@ -103,12 +96,12 @@ END_FTR_SECTION(0, 1) .llong hvReleaseData-KERNELBASE /* - * At offset 0x28 and 0x30 are offsets to the msChunks + * At offset 0x28 and 0x30 are offsets to the mschunks_map * array (used by the iSeries LPAR debugger to do translation * between physical addresses and absolute addresses) and * to the pidhash table (also used by the debugger) */ - .llong msChunks-KERNELBASE + .llong mschunks_map-KERNELBASE .llong 0 /* pidhash-KERNELBASE SFRXXX */ /* Offset 0x38 - Pointer to start of embedded System.map */ @@ -120,7 +113,7 @@ embedded_sysmap_start: embedded_sysmap_end: .llong 0 -#else /* CONFIG_PPC_ISERIES */ +#endif /* CONFIG_PPC_ISERIES */ /* Secondary processors spin on this value until it goes to 1. */ .globl __secondary_hold_spinloop @@ -155,7 +148,7 @@ _GLOBAL(__secondary_hold) std r24,__secondary_hold_acknowledge@l(0) sync - /* All secondary cpu's wait here until told to start. */ + /* All secondary cpus wait here until told to start. */ 100: ld r4,__secondary_hold_spinloop@l(0) cmpdi 0,r4,1 bne 100b @@ -170,7 +163,6 @@ _GLOBAL(__secondary_hold) BUG_OPCODE #endif #endif -#endif /* This value is used to mark exception frames on the stack. */ .section ".toc","aw" @@ -502,33 +494,37 @@ system_call_pSeries: STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint) STD_EXCEPTION_PSERIES(0x1700, altivec_assist) + . = 0x3000 + +/*** pSeries interrupt support ***/ + /* moved from 0xf00 */ - STD_EXCEPTION_PSERIES(0x3000, performance_monitor) + STD_EXCEPTION_PSERIES(., performance_monitor) - . = 0x3100 + .align 7 _GLOBAL(do_stab_bolted_pSeries) mtcrf 0x80,r12 mfspr r12,SPRG2 EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted) - - /* Space for the naca. Architected to be located at real address - * NACA_PHYS_ADDR. Various tools rely on this location being fixed. - * The first dword of the naca is required by iSeries LPAR to - * point to itVpdAreas. On pSeries native, this value is not used. - */ - . = NACA_PHYS_ADDR - .globl __end_interrupts -__end_interrupts: -#ifdef CONFIG_PPC_ISERIES - .globl naca -naca: - .llong itVpdAreas - .llong 0 /* xRamDisk */ - .llong 0 /* xRamDiskSize */ +/* + * Vectors for the FWNMI option. Share common code. + */ + .globl system_reset_fwnmi +system_reset_fwnmi: + HMT_MEDIUM + mtspr SPRG1,r13 /* save r13 */ + RUNLATCH_ON(r13) + EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) - . = 0x6100 + .globl machine_check_fwnmi +machine_check_fwnmi: + HMT_MEDIUM + mtspr SPRG1,r13 /* save r13 */ + RUNLATCH_ON(r13) + EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) +#ifdef CONFIG_PPC_ISERIES /*** ISeries-LPAR interrupt handlers ***/ STD_EXCEPTION_ISERIES(0x200, machine_check, PACA_EXMC) @@ -626,9 +622,7 @@ system_reset_iSeries: cmpwi 0,r23,0 beq iSeries_secondary_smp_loop /* Loop until told to go */ -#ifdef SECONDARY_PROCESSORS bne .__secondary_start /* Loop until told to go */ -#endif iSeries_secondary_smp_loop: /* Let the Hypervisor know we are alive */ /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */ @@ -671,51 +665,8 @@ hardware_interrupt_iSeries_masked: ld r13,PACA_EXGEN+EX_R13(r13) rfid b . /* prevent speculative execution */ -#endif - -/* - * Data area reserved for FWNMI option. - */ - .= 0x7000 - .globl fwnmi_data_area -fwnmi_data_area: - -#ifdef CONFIG_PPC_ISERIES - . = LPARMAP_PHYS -#include "lparmap.s" #endif /* CONFIG_PPC_ISERIES */ -/* - * Vectors for the FWNMI option. Share common code. - */ - . = 0x8000 - .globl system_reset_fwnmi -system_reset_fwnmi: - HMT_MEDIUM - mtspr SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) - .globl machine_check_fwnmi -machine_check_fwnmi: - HMT_MEDIUM - mtspr SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) - EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) - - /* - * Space for the initial segment table - * For LPAR, the hypervisor must fill in at least one entry - * before we get control (with relocate on) - */ - . = STAB0_PHYS_ADDR - .globl __start_stab -__start_stab: - - . = (STAB0_PHYS_ADDR + PAGE_SIZE) - .globl __end_stab -__end_stab: - - /*** Common interrupt handlers ***/ STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception) @@ -752,8 +703,8 @@ machine_check_common: * R9 contains the saved CR, r13 points to the paca, * r10 contains the (bad) kernel stack pointer, * r11 and r12 contain the saved SRR0 and SRR1. - * We switch to using the paca guard page as an emergency stack, - * save the registers there, and call kernel_bad_stack(), which panics. + * We switch to using an emergency stack, save the registers there, + * and call kernel_bad_stack(), which panics. */ bad_stack: ld r1,PACAEMERGSP(r13) @@ -906,6 +857,62 @@ fp_unavailable_common: bl .kernel_fp_unavailable_exception BUG_OPCODE +/* + * load_up_fpu(unused, unused, tsk) + * Disable FP for the task which had the FPU previously, + * and save its floating-point registers in its thread_struct. + * Enables the FPU for use in the kernel on return. + * On SMP we know the fpu is free, since we give it up every + * switch (ie, no lazy save of the FP registers). + * On entry: r13 == 'current' && last_task_used_math != 'current' + */ +_STATIC(load_up_fpu) + mfmsr r5 /* grab the current MSR */ + ori r5,r5,MSR_FP + mtmsrd r5 /* enable use of fpu now */ + isync +/* + * For SMP, we don't do lazy FPU switching because it just gets too + * horrendously complex, especially when a task switches from one CPU + * to another. Instead we call giveup_fpu in switch_to. + * + */ +#ifndef CONFIG_SMP + ld r3,last_task_used_math@got(r2) + ld r4,0(r3) + cmpdi 0,r4,0 + beq 1f + /* Save FP state to last_task_used_math's THREAD struct */ + addi r4,r4,THREAD + SAVE_32FPRS(0, r4) + mffs fr0 + stfd fr0,THREAD_FPSCR(r4) + /* Disable FP for last_task_used_math */ + ld r5,PT_REGS(r4) + ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) + li r6,MSR_FP|MSR_FE0|MSR_FE1 + andc r4,r4,r6 + std r4,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#endif /* CONFIG_SMP */ + /* enable use of FP after return */ + ld r4,PACACURRENT(r13) + addi r5,r4,THREAD /* Get THREAD */ + ld r4,THREAD_FPEXC_MODE(r5) + ori r12,r12,MSR_FP + or r12,r12,r4 + std r12,_MSR(r1) + lfd fr0,THREAD_FPSCR(r5) + mtfsf 0xff,fr0 + REST_32FPRS(0, r5) +#ifndef CONFIG_SMP + /* Update last_task_used_math to 'current' */ + subi r4,r5,THREAD /* Back to 'current' */ + std r4,0(r3) +#endif /* CONFIG_SMP */ + /* restore registers and return */ + b fast_exception_return + .align 7 .globl altivec_unavailable_common altivec_unavailable_common: @@ -921,6 +928,80 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) bl .altivec_unavailable_exception b .ret_from_except +#ifdef CONFIG_ALTIVEC +/* + * load_up_altivec(unused, unused, tsk) + * Disable VMX for the task which had it previously, + * and save its vector registers in its thread_struct. + * Enables the VMX for use in the kernel on return. + * On SMP we know the VMX is free, since we give it up every + * switch (ie, no lazy save of the vector registers). + * On entry: r13 == 'current' && last_task_used_altivec != 'current' + */ +_STATIC(load_up_altivec) + mfmsr r5 /* grab the current MSR */ + oris r5,r5,MSR_VEC@h + mtmsrd r5 /* enable use of VMX now */ + isync + +/* + * For SMP, we don't do lazy VMX switching because it just gets too + * horrendously complex, especially when a task switches from one CPU + * to another. Instead we call giveup_altvec in switch_to. + * VRSAVE isn't dealt with here, that is done in the normal context + * switch code. Note that we could rely on vrsave value to eventually + * avoid saving all of the VREGs here... + */ +#ifndef CONFIG_SMP + ld r3,last_task_used_altivec@got(r2) + ld r4,0(r3) + cmpdi 0,r4,0 + beq 1f + /* Save VMX state to last_task_used_altivec's THREAD struct */ + addi r4,r4,THREAD + SAVE_32VRS(0,r5,r4) + mfvscr vr0 + li r10,THREAD_VSCR + stvx vr0,r10,r4 + /* Disable VMX for last_task_used_altivec */ + ld r5,PT_REGS(r4) + ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) + lis r6,MSR_VEC@h + andc r4,r4,r6 + std r4,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#endif /* CONFIG_SMP */ + /* Hack: if we get an altivec unavailable trap with VRSAVE + * set to all zeros, we assume this is a broken application + * that fails to set it properly, and thus we switch it to + * all 1's + */ + mfspr r4,SPRN_VRSAVE + cmpdi 0,r4,0 + bne+ 1f + li r4,-1 + mtspr SPRN_VRSAVE,r4 +1: + /* enable use of VMX after return */ + ld r4,PACACURRENT(r13) + addi r5,r4,THREAD /* Get THREAD */ + oris r12,r12,MSR_VEC@h + std r12,_MSR(r1) + li r4,1 + li r10,THREAD_VSCR + stw r4,THREAD_USED_VR(r5) + lvx vr0,r10,r5 + mtvscr vr0 + REST_32VRS(0,r4,r5) +#ifndef CONFIG_SMP + /* Update last_task_used_math to 'current' */ + subi r4,r5,THREAD /* Back to 'current' */ + std r4,0(r3) +#endif /* CONFIG_SMP */ + /* restore registers and return */ + b fast_exception_return +#endif /* CONFIG_ALTIVEC */ + /* * Hash table stuff */ @@ -1167,6 +1248,42 @@ unrecov_slb: bl .unrecoverable_exception b 1b +/* + * Space for CPU0's segment table. + * + * On iSeries, the hypervisor must fill in at least one entry before + * we get control (with relocate on). The address is give to the hv + * as a page number (see xLparMap in LparData.c), so this must be at a + * fixed address (the linker can't compute (u64)&initial_stab >> + * PAGE_SHIFT). + */ + . = STAB0_PHYS_ADDR /* 0x6000 */ + .globl initial_stab +initial_stab: + .space 4096 + +/* + * Data area reserved for FWNMI option. + * This address (0x7000) is fixed by the RPA. + */ + .= 0x7000 + .globl fwnmi_data_area +fwnmi_data_area: + + /* iSeries does not use the FWNMI stuff, so it is safe to put + * this here, even if we later allow kernels that will boot on + * both pSeries and iSeries */ +#ifdef CONFIG_PPC_ISERIES + . = LPARMAP_PHYS +#include "lparmap.s" +/* + * This ".text" is here for old compilers that generate a trailing + * .note section when compiling .c files to .s + */ + .text +#endif /* CONFIG_PPC_ISERIES */ + + . = 0x8000 /* * On pSeries, secondary processors spin in the following code. @@ -1200,7 +1317,7 @@ _GLOBAL(pSeries_secondary_smp_init) b .kexec_wait /* next kernel might do better */ 2: mtspr SPRG3,r13 /* Save vaddr of paca in SPRG3 */ - /* From now on, r24 is expected to be logica cpuid */ + /* From now on, r24 is expected to be logical cpuid */ mr r24,r5 3: HMT_LOW lbz r23,PACAPROCSTART(r13) /* Test if this processor should */ @@ -1213,10 +1330,8 @@ _GLOBAL(pSeries_secondary_smp_init) cmpwi 0,r23,0 #ifdef CONFIG_SMP -#ifdef SECONDARY_PROCESSORS bne .__secondary_start #endif -#endif b 3b /* Loop until told to go */ #ifdef CONFIG_PPC_ISERIES @@ -1430,228 +1545,6 @@ _GLOBAL(copy_and_flush) .align 8 copy_to_here: -/* - * load_up_fpu(unused, unused, tsk) - * Disable FP for the task which had the FPU previously, - * and save its floating-point registers in its thread_struct. - * Enables the FPU for use in the kernel on return. - * On SMP we know the fpu is free, since we give it up every - * switch (ie, no lazy save of the FP registers). - * On entry: r13 == 'current' && last_task_used_math != 'current' - */ -_STATIC(load_up_fpu) - mfmsr r5 /* grab the current MSR */ - ori r5,r5,MSR_FP - mtmsrd r5 /* enable use of fpu now */ - isync -/* - * For SMP, we don't do lazy FPU switching because it just gets too - * horrendously complex, especially when a task switches from one CPU - * to another. Instead we call giveup_fpu in switch_to. - * - */ -#ifndef CONFIG_SMP - ld r3,last_task_used_math@got(r2) - ld r4,0(r3) - cmpdi 0,r4,0 - beq 1f - /* Save FP state to last_task_used_math's THREAD struct */ - addi r4,r4,THREAD - SAVE_32FPRS(0, r4) - mffs fr0 - stfd fr0,THREAD_FPSCR(r4) - /* Disable FP for last_task_used_math */ - ld r5,PT_REGS(r4) - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - li r6,MSR_FP|MSR_FE0|MSR_FE1 - andc r4,r4,r6 - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - /* enable use of FP after return */ - ld r4,PACACURRENT(r13) - addi r5,r4,THREAD /* Get THREAD */ - ld r4,THREAD_FPEXC_MODE(r5) - ori r12,r12,MSR_FP - or r12,r12,r4 - std r12,_MSR(r1) - lfd fr0,THREAD_FPSCR(r5) - mtfsf 0xff,fr0 - REST_32FPRS(0, r5) -#ifndef CONFIG_SMP - /* Update last_task_used_math to 'current' */ - subi r4,r5,THREAD /* Back to 'current' */ - std r4,0(r3) -#endif /* CONFIG_SMP */ - /* restore registers and return */ - b fast_exception_return - -/* - * disable_kernel_fp() - * Disable the FPU. - */ -_GLOBAL(disable_kernel_fp) - mfmsr r3 - rldicl r0,r3,(63-MSR_FP_LG),1 - rldicl r3,r0,(MSR_FP_LG+1),0 - mtmsrd r3 /* disable use of fpu now */ - isync - blr - -/* - * giveup_fpu(tsk) - * Disable FP for the task given as the argument, - * and save the floating-point registers in its thread_struct. - * Enables the FPU for use in the kernel on return. - */ -_GLOBAL(giveup_fpu) - mfmsr r5 - ori r5,r5,MSR_FP - mtmsrd r5 /* enable use of fpu now */ - isync - cmpdi 0,r3,0 - beqlr- /* if no previous owner, done */ - addi r3,r3,THREAD /* want THREAD of task */ - ld r5,PT_REGS(r3) - cmpdi 0,r5,0 - SAVE_32FPRS(0, r3) - mffs fr0 - stfd fr0,THREAD_FPSCR(r3) - beq 1f - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - li r3,MSR_FP|MSR_FE0|MSR_FE1 - andc r4,r4,r3 /* disable FP for previous task */ - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#ifndef CONFIG_SMP - li r5,0 - ld r4,last_task_used_math@got(r2) - std r5,0(r4) -#endif /* CONFIG_SMP */ - blr - - -#ifdef CONFIG_ALTIVEC - -/* - * load_up_altivec(unused, unused, tsk) - * Disable VMX for the task which had it previously, - * and save its vector registers in its thread_struct. - * Enables the VMX for use in the kernel on return. - * On SMP we know the VMX is free, since we give it up every - * switch (ie, no lazy save of the vector registers). - * On entry: r13 == 'current' && last_task_used_altivec != 'current' - */ -_STATIC(load_up_altivec) - mfmsr r5 /* grab the current MSR */ - oris r5,r5,MSR_VEC@h - mtmsrd r5 /* enable use of VMX now */ - isync - -/* - * For SMP, we don't do lazy VMX switching because it just gets too - * horrendously complex, especially when a task switches from one CPU - * to another. Instead we call giveup_altvec in switch_to. - * VRSAVE isn't dealt with here, that is done in the normal context - * switch code. Note that we could rely on vrsave value to eventually - * avoid saving all of the VREGs here... - */ -#ifndef CONFIG_SMP - ld r3,last_task_used_altivec@got(r2) - ld r4,0(r3) - cmpdi 0,r4,0 - beq 1f - /* Save VMX state to last_task_used_altivec's THREAD struct */ - addi r4,r4,THREAD - SAVE_32VRS(0,r5,r4) - mfvscr vr0 - li r10,THREAD_VSCR - stvx vr0,r10,r4 - /* Disable VMX for last_task_used_altivec */ - ld r5,PT_REGS(r4) - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r6,MSR_VEC@h - andc r4,r4,r6 - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - /* Hack: if we get an altivec unavailable trap with VRSAVE - * set to all zeros, we assume this is a broken application - * that fails to set it properly, and thus we switch it to - * all 1's - */ - mfspr r4,SPRN_VRSAVE - cmpdi 0,r4,0 - bne+ 1f - li r4,-1 - mtspr SPRN_VRSAVE,r4 -1: - /* enable use of VMX after return */ - ld r4,PACACURRENT(r13) - addi r5,r4,THREAD /* Get THREAD */ - oris r12,r12,MSR_VEC@h - std r12,_MSR(r1) - li r4,1 - li r10,THREAD_VSCR - stw r4,THREAD_USED_VR(r5) - lvx vr0,r10,r5 - mtvscr vr0 - REST_32VRS(0,r4,r5) -#ifndef CONFIG_SMP - /* Update last_task_used_math to 'current' */ - subi r4,r5,THREAD /* Back to 'current' */ - std r4,0(r3) -#endif /* CONFIG_SMP */ - /* restore registers and return */ - b fast_exception_return - -/* - * disable_kernel_altivec() - * Disable the VMX. - */ -_GLOBAL(disable_kernel_altivec) - mfmsr r3 - rldicl r0,r3,(63-MSR_VEC_LG),1 - rldicl r3,r0,(MSR_VEC_LG+1),0 - mtmsrd r3 /* disable use of VMX now */ - isync - blr - -/* - * giveup_altivec(tsk) - * Disable VMX for the task given as the argument, - * and save the vector registers in its thread_struct. - * Enables the VMX for use in the kernel on return. - */ -_GLOBAL(giveup_altivec) - mfmsr r5 - oris r5,r5,MSR_VEC@h - mtmsrd r5 /* enable use of VMX now */ - isync - cmpdi 0,r3,0 - beqlr- /* if no previous owner, done */ - addi r3,r3,THREAD /* want THREAD of task */ - ld r5,PT_REGS(r3) - cmpdi 0,r5,0 - SAVE_32VRS(0,r4,r3) - mfvscr vr0 - li r4,THREAD_VSCR - stvx vr0,r4,r3 - beq 1f - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r3,MSR_VEC@h - andc r4,r4,r3 /* disable FP for previous task */ - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#ifndef CONFIG_SMP - li r5,0 - ld r4,last_task_used_altivec@got(r2) - std r5,0(r4) -#endif /* CONFIG_SMP */ - blr - -#endif /* CONFIG_ALTIVEC */ - #ifdef CONFIG_SMP #ifdef CONFIG_PPC_PMAC /* @@ -1753,8 +1646,9 @@ _GLOBAL(__secondary_start) #else /* set the ASR */ ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ + ld r3,0(r3) lwz r3,PLATFORM(r3) /* r3 = platform flags */ - cmpldi r3,PLATFORM_PSERIES_LPAR + andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ bne 98f mfspr r3,PVR srwi r3,r3,16 @@ -1916,8 +1810,9 @@ _STATIC(start_here_multiplatform) ld r3,PACASTABREAL(r13) ori r4,r3,1 /* turn on valid bit */ ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ + ld r3,0(r3) lwz r3,PLATFORM(r3) /* r3 = platform flags */ - cmpldi r3,PLATFORM_PSERIES_LPAR + andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ bne 98f mfspr r3,PVR srwi r3,r3,16 @@ -1935,9 +1830,10 @@ _STATIC(start_here_multiplatform) 99: /* Set SDR1 (hash table pointer) */ ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ + ld r3,0(r3) lwz r3,PLATFORM(r3) /* r3 = platform flags */ /* Test if bit 0 is set (LPAR bit) */ - andi. r3,r3,0x1 + andi. r3,r3,PLATFORM_LPAR bne 98f LOADADDR(r6,_SDR1) /* Only if NOT LPAR */ sub r6,r6,r26 @@ -2002,9 +1898,6 @@ _STATIC(start_here_common) bl .start_kernel -_GLOBAL(__setup_cpu_power3) - blr - _GLOBAL(hmt_init) #ifdef CONFIG_HMT LOADADDR(r5, hmt_thread_data) @@ -2095,20 +1988,19 @@ _GLOBAL(smp_release_cpus) /* * We put a few things here that have to be page-aligned. - * This stuff goes at the beginning of the data segment, - * which is page-aligned. + * This stuff goes at the beginning of the bss, which is page-aligned. */ - .data + .section ".bss" + .align 12 - .globl sdata -sdata: + .globl empty_zero_page empty_zero_page: - .space 4096 + .space PAGE_SIZE .globl swapper_pg_dir swapper_pg_dir: - .space 4096 + .space PAGE_SIZE /* * This space gets a copy of optional info passed to us by the bootstrap diff --git a/arch/ppc64/kernel/iSeries_VpdInfo.c b/arch/ppc64/kernel/iSeries_VpdInfo.c index d11c732daf81..5d921792571f 100644 --- a/arch/ppc64/kernel/iSeries_VpdInfo.c +++ b/arch/ppc64/kernel/iSeries_VpdInfo.c @@ -264,8 +264,5 @@ void __init iSeries_Device_Information(struct pci_dev *PciDev, int count) printk("%d. PCI: Bus%3d, Device%3d, Vendor %04X Frame%3d, Card %4s ", count, bus, PCI_SLOT(PciDev->devfn), PciDev->vendor, frame, card); - if (pci_class_name(PciDev->class >> 8) == 0) - printk("0x%04X\n", (int)(PciDev->class >> 8)); - else - printk("%s\n", pci_class_name(PciDev->class >> 8)); + printk("0x%04X\n", (int)(PciDev->class >> 8)); } diff --git a/arch/ppc64/kernel/iSeries_htab.c b/arch/ppc64/kernel/iSeries_htab.c index b0250ae4a72a..2192055a90a0 100644 --- a/arch/ppc64/kernel/iSeries_htab.c +++ b/arch/ppc64/kernel/iSeries_htab.c @@ -41,6 +41,7 @@ static long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va, unsigned long prpn, unsigned long vflags, unsigned long rflags) { + unsigned long arpn; long slot; hpte_t lhpte; int secondary = 0; @@ -70,8 +71,10 @@ static long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va, slot &= 0x7fffffffffffffff; } + arpn = phys_to_abs(prpn << PAGE_SHIFT) >> PAGE_SHIFT; + lhpte.v = (va >> 23) << HPTE_V_AVPN_SHIFT | vflags | HPTE_V_VALID; - lhpte.r = (physRpn_to_absRpn(prpn) << HPTE_R_RPN_SHIFT) | rflags; + lhpte.r = (arpn << HPTE_R_RPN_SHIFT) | rflags; /* Now fill in the actual HPTE */ HvCallHpt_addValidate(slot, secondary, &lhpte); diff --git a/arch/ppc64/kernel/iSeries_pci.c b/arch/ppc64/kernel/iSeries_pci.c index 356e4fd9a94f..fbc273c32bcc 100644 --- a/arch/ppc64/kernel/iSeries_pci.c +++ b/arch/ppc64/kernel/iSeries_pci.c @@ -252,7 +252,7 @@ unsigned long __init find_and_init_phbs(void) phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), GFP_KERNEL); if (phb == NULL) return -ENOMEM; - pci_setup_pci_controller(phb); + pci_setup_pci_controller(phb); phb->pci_mem_offset = phb->local_number = bus; phb->first_busno = bus; diff --git a/arch/ppc64/kernel/iSeries_setup.c b/arch/ppc64/kernel/iSeries_setup.c index a649edbb23b6..3ffefbbc6623 100644 --- a/arch/ppc64/kernel/iSeries_setup.c +++ b/arch/ppc64/kernel/iSeries_setup.c @@ -39,6 +39,7 @@ #include <asm/cputable.h> #include <asm/sections.h> #include <asm/iommu.h> +#include <asm/firmware.h> #include <asm/time.h> #include "iSeries_setup.h" @@ -314,6 +315,8 @@ static void __init iSeries_init_early(void) DBG(" -> iSeries_init_early()\n"); + ppc64_firmware_features = FW_FEATURE_ISERIES; + ppcdbg_initialize(); #if defined(CONFIG_BLK_DEV_INITRD) @@ -412,6 +415,22 @@ static void __init iSeries_init_early(void) DBG(" <- iSeries_init_early()\n"); } +struct mschunks_map mschunks_map = { + /* XXX We don't use these, but Piranha might need them. */ + .chunk_size = MSCHUNKS_CHUNK_SIZE, + .chunk_shift = MSCHUNKS_CHUNK_SHIFT, + .chunk_mask = MSCHUNKS_OFFSET_MASK, +}; +EXPORT_SYMBOL(mschunks_map); + +void mschunks_alloc(unsigned long num_chunks) +{ + klimit = _ALIGN(klimit, sizeof(u32)); + mschunks_map.mapping = (u32 *)klimit; + klimit += num_chunks * sizeof(u32); + mschunks_map.num_chunks = num_chunks; +} + /* * The iSeries may have very large memories ( > 128 GB ) and a partition * may get memory in "chunks" that may be anywhere in the 2**52 real @@ -449,7 +468,7 @@ static void __init build_iSeries_Memory_Map(void) /* Chunk size on iSeries is 256K bytes */ totalChunks = (u32)HvLpConfig_getMsChunks(); - klimit = msChunks_alloc(klimit, totalChunks, 1UL << 18); + mschunks_alloc(totalChunks); /* * Get absolute address of our load area @@ -486,7 +505,7 @@ static void __init build_iSeries_Memory_Map(void) printk("Load area size %dK\n", loadAreaSize * 256); for (nextPhysChunk = 0; nextPhysChunk < loadAreaSize; ++nextPhysChunk) - msChunks.abs[nextPhysChunk] = + mschunks_map.mapping[nextPhysChunk] = loadAreaFirstChunk + nextPhysChunk; /* @@ -495,7 +514,7 @@ static void __init build_iSeries_Memory_Map(void) */ hptFirstChunk = (u32)addr_to_chunk(HvCallHpt_getHptAddress()); hptSizePages = (u32)HvCallHpt_getHptPages(); - hptSizeChunks = hptSizePages >> (msChunks.chunk_shift - PAGE_SHIFT); + hptSizeChunks = hptSizePages >> (MSCHUNKS_CHUNK_SHIFT - PAGE_SHIFT); hptLastChunk = hptFirstChunk + hptSizeChunks - 1; printk("HPT absolute addr = %016lx, size = %dK\n", @@ -552,7 +571,8 @@ static void __init build_iSeries_Memory_Map(void) (absChunk > hptLastChunk)) && ((absChunk < loadAreaFirstChunk) || (absChunk > loadAreaLastChunk))) { - msChunks.abs[nextPhysChunk] = absChunk; + mschunks_map.mapping[nextPhysChunk] = + absChunk; ++nextPhysChunk; } } @@ -944,6 +964,8 @@ void __init iSeries_early_setup(void) ppc_md.calibrate_decr = iSeries_calibrate_decr; ppc_md.progress = iSeries_progress; + /* XXX Implement enable_pmcs for iSeries */ + if (get_paca()->lppaca.shared_proc) { ppc_md.idle_loop = iseries_shared_idle; printk(KERN_INFO "Using shared processor idle loop\n"); diff --git a/arch/ppc64/kernel/iSeries_vio.c b/arch/ppc64/kernel/iSeries_vio.c new file mode 100644 index 000000000000..6b754b0c8344 --- /dev/null +++ b/arch/ppc64/kernel/iSeries_vio.c @@ -0,0 +1,155 @@ +/* + * IBM PowerPC iSeries Virtual I/O Infrastructure Support. + * + * Copyright (c) 2005 Stephen Rothwell, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/types.h> +#include <linux/device.h> +#include <linux/init.h> + +#include <asm/vio.h> +#include <asm/iommu.h> +#include <asm/abs_addr.h> +#include <asm/page.h> +#include <asm/iSeries/vio.h> +#include <asm/iSeries/HvTypes.h> +#include <asm/iSeries/HvLpConfig.h> +#include <asm/iSeries/HvCallXm.h> + +struct device *iSeries_vio_dev = &vio_bus_device.dev; +EXPORT_SYMBOL(iSeries_vio_dev); + +static struct iommu_table veth_iommu_table; +static struct iommu_table vio_iommu_table; + +static void __init iommu_vio_init(void) +{ + struct iommu_table *t; + struct iommu_table_cb cb; + unsigned long cbp; + unsigned long itc_entries; + + cb.itc_busno = 255; /* Bus 255 is the virtual bus */ + cb.itc_virtbus = 0xff; /* Ask for virtual bus */ + + cbp = virt_to_abs(&cb); + HvCallXm_getTceTableParms(cbp); + + itc_entries = cb.itc_size * PAGE_SIZE / sizeof(union tce_entry); + veth_iommu_table.it_size = itc_entries / 2; + veth_iommu_table.it_busno = cb.itc_busno; + veth_iommu_table.it_offset = cb.itc_offset; + veth_iommu_table.it_index = cb.itc_index; + veth_iommu_table.it_type = TCE_VB; + veth_iommu_table.it_blocksize = 1; + + t = iommu_init_table(&veth_iommu_table); + + if (!t) + printk("Virtual Bus VETH TCE table failed.\n"); + + vio_iommu_table.it_size = itc_entries - veth_iommu_table.it_size; + vio_iommu_table.it_busno = cb.itc_busno; + vio_iommu_table.it_offset = cb.itc_offset + + veth_iommu_table.it_size; + vio_iommu_table.it_index = cb.itc_index; + vio_iommu_table.it_type = TCE_VB; + vio_iommu_table.it_blocksize = 1; + + t = iommu_init_table(&vio_iommu_table); + + if (!t) + printk("Virtual Bus VIO TCE table failed.\n"); +} + +/** + * vio_register_device_iseries: - Register a new iSeries vio device. + * @voidev: The device to register. + */ +static struct vio_dev *__init vio_register_device_iseries(char *type, + uint32_t unit_num) +{ + struct vio_dev *viodev; + + /* allocate a vio_dev for this device */ + viodev = kmalloc(sizeof(struct vio_dev), GFP_KERNEL); + if (!viodev) + return NULL; + memset(viodev, 0, sizeof(struct vio_dev)); + + snprintf(viodev->dev.bus_id, BUS_ID_SIZE, "%s%d", type, unit_num); + + viodev->name = viodev->dev.bus_id; + viodev->type = type; + viodev->unit_address = unit_num; + viodev->iommu_table = &vio_iommu_table; + if (vio_register_device(viodev) == NULL) { + kfree(viodev); + return NULL; + } + return viodev; +} + +void __init probe_bus_iseries(void) +{ + HvLpIndexMap vlan_map; + struct vio_dev *viodev; + int i; + + /* there is only one of each of these */ + vio_register_device_iseries("viocons", 0); + vio_register_device_iseries("vscsi", 0); + + vlan_map = HvLpConfig_getVirtualLanIndexMap(); + for (i = 0; i < HVMAXARCHITECTEDVIRTUALLANS; i++) { + if ((vlan_map & (0x8000 >> i)) == 0) + continue; + viodev = vio_register_device_iseries("vlan", i); + /* veth is special and has it own iommu_table */ + viodev->iommu_table = &veth_iommu_table; + } + for (i = 0; i < HVMAXARCHITECTEDVIRTUALDISKS; i++) + vio_register_device_iseries("viodasd", i); + for (i = 0; i < HVMAXARCHITECTEDVIRTUALCDROMS; i++) + vio_register_device_iseries("viocd", i); + for (i = 0; i < HVMAXARCHITECTEDVIRTUALTAPES; i++) + vio_register_device_iseries("viotape", i); +} + +/** + * vio_match_device_iseries: - Tell if a iSeries VIO device matches a + * vio_device_id + */ +static int vio_match_device_iseries(const struct vio_device_id *id, + const struct vio_dev *dev) +{ + return strncmp(dev->type, id->type, strlen(id->type)) == 0; +} + +static struct vio_bus_ops vio_bus_ops_iseries = { + .match = vio_match_device_iseries, +}; + +/** + * vio_bus_init_iseries: - Initialize the iSeries virtual IO bus + */ +static int __init vio_bus_init_iseries(void) +{ + int err; + + err = vio_bus_init(&vio_bus_ops_iseries); + if (err == 0) { + iommu_vio_init(); + vio_bus_device.iommu_table = &vio_iommu_table; + iSeries_vio_dev = &vio_bus_device.dev; + probe_bus_iseries(); + } + return err; +} + +__initcall(vio_bus_init_iseries); diff --git a/arch/ppc64/kernel/idle_power4.S b/arch/ppc64/kernel/idle_power4.S index 97e4a2655040..ca02afe2a795 100644 --- a/arch/ppc64/kernel/idle_power4.S +++ b/arch/ppc64/kernel/idle_power4.S @@ -20,7 +20,7 @@ #include <asm/cputable.h> #include <asm/thread_info.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #undef DEBUG diff --git a/arch/ppc64/kernel/iomap.c b/arch/ppc64/kernel/iomap.c index 153cc8b0f136..6160c8dbb7c5 100644 --- a/arch/ppc64/kernel/iomap.c +++ b/arch/ppc64/kernel/iomap.c @@ -22,13 +22,23 @@ unsigned int fastcall ioread16(void __iomem *addr) { return readw(addr); } +unsigned int fastcall ioread16be(void __iomem *addr) +{ + return in_be16(addr); +} unsigned int fastcall ioread32(void __iomem *addr) { return readl(addr); } +unsigned int fastcall ioread32be(void __iomem *addr) +{ + return in_be32(addr); +} EXPORT_SYMBOL(ioread8); EXPORT_SYMBOL(ioread16); +EXPORT_SYMBOL(ioread16be); EXPORT_SYMBOL(ioread32); +EXPORT_SYMBOL(ioread32be); void fastcall iowrite8(u8 val, void __iomem *addr) { @@ -38,13 +48,23 @@ void fastcall iowrite16(u16 val, void __iomem *addr) { writew(val, addr); } +void fastcall iowrite16be(u16 val, void __iomem *addr) +{ + out_be16(addr, val); +} void fastcall iowrite32(u32 val, void __iomem *addr) { writel(val, addr); } +void fastcall iowrite32be(u32 val, void __iomem *addr) +{ + out_be32(addr, val); +} EXPORT_SYMBOL(iowrite8); EXPORT_SYMBOL(iowrite16); +EXPORT_SYMBOL(iowrite16be); EXPORT_SYMBOL(iowrite32); +EXPORT_SYMBOL(iowrite32be); /* * These are the "repeat read/write" functions. Note the @@ -56,15 +76,15 @@ EXPORT_SYMBOL(iowrite32); */ void ioread8_rep(void __iomem *addr, void *dst, unsigned long count) { - _insb((u8 __force *) addr, dst, count); + _insb((u8 __iomem *) addr, dst, count); } void ioread16_rep(void __iomem *addr, void *dst, unsigned long count) { - _insw_ns((u16 __force *) addr, dst, count); + _insw_ns((u16 __iomem *) addr, dst, count); } void ioread32_rep(void __iomem *addr, void *dst, unsigned long count) { - _insl_ns((u32 __force *) addr, dst, count); + _insl_ns((u32 __iomem *) addr, dst, count); } EXPORT_SYMBOL(ioread8_rep); EXPORT_SYMBOL(ioread16_rep); @@ -72,15 +92,15 @@ EXPORT_SYMBOL(ioread32_rep); void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count) { - _outsb((u8 __force *) addr, src, count); + _outsb((u8 __iomem *) addr, src, count); } void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count) { - _outsw_ns((u16 __force *) addr, src, count); + _outsw_ns((u16 __iomem *) addr, src, count); } void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count) { - _outsl_ns((u32 __force *) addr, src, count); + _outsl_ns((u32 __iomem *) addr, src, count); } EXPORT_SYMBOL(iowrite8_rep); EXPORT_SYMBOL(iowrite16_rep); diff --git a/arch/ppc64/kernel/iommu.c b/arch/ppc64/kernel/iommu.c index 845eebd1e28d..9032b6bfe036 100644 --- a/arch/ppc64/kernel/iommu.c +++ b/arch/ppc64/kernel/iommu.c @@ -438,7 +438,8 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl) void iommu_free_table(struct device_node *dn) { - struct iommu_table *tbl = dn->iommu_table; + struct pci_dn *pdn = dn->data; + struct iommu_table *tbl = pdn->iommu_table; unsigned long bitmap_sz, i; unsigned int order; diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index a3d519518fb8..7e80d49c589a 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -44,7 +44,7 @@ static struct kprobe *kprobe_prev; static unsigned long kprobe_status_prev, kprobe_saved_msr_prev; static struct pt_regs jprobe_saved_regs; -int arch_prepare_kprobe(struct kprobe *p) +int __kprobes arch_prepare_kprobe(struct kprobe *p) { int ret = 0; kprobe_opcode_t insn = *p->addr; @@ -68,27 +68,27 @@ int arch_prepare_kprobe(struct kprobe *p) return ret; } -void arch_copy_kprobe(struct kprobe *p) +void __kprobes arch_copy_kprobe(struct kprobe *p) { memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); p->opcode = *p->addr; } -void arch_arm_kprobe(struct kprobe *p) +void __kprobes arch_arm_kprobe(struct kprobe *p) { *p->addr = BREAKPOINT_INSTRUCTION; flush_icache_range((unsigned long) p->addr, (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } -void arch_disarm_kprobe(struct kprobe *p) +void __kprobes arch_disarm_kprobe(struct kprobe *p) { *p->addr = p->opcode; flush_icache_range((unsigned long) p->addr, (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } -void arch_remove_kprobe(struct kprobe *p) +void __kprobes arch_remove_kprobe(struct kprobe *p) { up(&kprobe_mutex); free_insn_slot(p->ainsn.insn); @@ -102,7 +102,7 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->msr |= MSR_SE; /* single step inline if it is a trap variant */ - if (IS_TW(insn) || IS_TD(insn) || IS_TWI(insn) || IS_TDI(insn)) + if (is_trap(insn)) regs->nip = (unsigned long)p->addr; else regs->nip = (unsigned long)p->ainsn.insn; @@ -122,7 +122,8 @@ static inline void restore_previous_kprobe(void) kprobe_saved_msr = kprobe_saved_msr_prev; } -void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) +void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, + struct pt_regs *regs) { struct kretprobe_instance *ri; @@ -151,7 +152,9 @@ static inline int kprobe_handler(struct pt_regs *regs) Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS) { + kprobe_opcode_t insn = *p->ainsn.insn; + if (kprobe_status == KPROBE_HIT_SS && + is_trap(insn)) { regs->msr &= ~MSR_SE; regs->msr |= kprobe_saved_msr; unlock_kprobes(); @@ -191,8 +194,7 @@ static inline int kprobe_handler(struct pt_regs *regs) * trap variant, it could belong to someone else */ kprobe_opcode_t cur_insn = *addr; - if (IS_TW(cur_insn) || IS_TD(cur_insn) || - IS_TWI(cur_insn) || IS_TDI(cur_insn)) + if (is_trap(cur_insn)) goto no_kprobe; /* * The breakpoint instruction was removed right @@ -244,7 +246,7 @@ void kretprobe_trampoline_holder(void) /* * Called when the probe at kretprobe trampoline is hit */ -int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) { struct kretprobe_instance *ri = NULL; struct hlist_head *head; @@ -308,7 +310,7 @@ int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * single-stepped a copy of the instruction. The address of this * copy is p->ainsn.insn. */ -static void resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) { int ret; unsigned int insn = *p->ainsn.insn; @@ -373,8 +375,8 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) /* * Wrapper routine to for handling exceptions. */ -int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, - void *data) +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; @@ -402,11 +404,11 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, default: break; } - preempt_enable(); + preempt_enable_no_resched(); return ret; } -int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); @@ -419,16 +421,16 @@ int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) return 1; } -void jprobe_return(void) +void __kprobes jprobe_return(void) { asm volatile("trap" ::: "memory"); } -void jprobe_return_end(void) +void __kprobes jprobe_return_end(void) { }; -int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { /* * FIXME - we should ideally be validating that we got here 'cos diff --git a/arch/ppc64/kernel/lmb.c b/arch/ppc64/kernel/lmb.c index d6c6bd03d2a4..5adaca2ddc9d 100644 --- a/arch/ppc64/kernel/lmb.c +++ b/arch/ppc64/kernel/lmb.c @@ -28,33 +28,28 @@ void lmb_dump_all(void) { #ifdef DEBUG unsigned long i; - struct lmb *_lmb = &lmb; udbg_printf("lmb_dump_all:\n"); udbg_printf(" memory.cnt = 0x%lx\n", - _lmb->memory.cnt); + lmb.memory.cnt); udbg_printf(" memory.size = 0x%lx\n", - _lmb->memory.size); - for (i=0; i < _lmb->memory.cnt ;i++) { + lmb.memory.size); + for (i=0; i < lmb.memory.cnt ;i++) { udbg_printf(" memory.region[0x%x].base = 0x%lx\n", - i, _lmb->memory.region[i].base); - udbg_printf(" .physbase = 0x%lx\n", - _lmb->memory.region[i].physbase); + i, lmb.memory.region[i].base); udbg_printf(" .size = 0x%lx\n", - _lmb->memory.region[i].size); + lmb.memory.region[i].size); } udbg_printf("\n reserved.cnt = 0x%lx\n", - _lmb->reserved.cnt); + lmb.reserved.cnt); udbg_printf(" reserved.size = 0x%lx\n", - _lmb->reserved.size); - for (i=0; i < _lmb->reserved.cnt ;i++) { + lmb.reserved.size); + for (i=0; i < lmb.reserved.cnt ;i++) { udbg_printf(" reserved.region[0x%x].base = 0x%lx\n", - i, _lmb->reserved.region[i].base); - udbg_printf(" .physbase = 0x%lx\n", - _lmb->reserved.region[i].physbase); + i, lmb.reserved.region[i].base); udbg_printf(" .size = 0x%lx\n", - _lmb->reserved.region[i].size); + lmb.reserved.region[i].size); } #endif /* DEBUG */ } @@ -98,7 +93,6 @@ lmb_coalesce_regions(struct lmb_region *rgn, unsigned long r1, unsigned long r2) rgn->region[r1].size += rgn->region[r2].size; for (i=r2; i < rgn->cnt-1; i++) { rgn->region[i].base = rgn->region[i+1].base; - rgn->region[i].physbase = rgn->region[i+1].physbase; rgn->region[i].size = rgn->region[i+1].size; } rgn->cnt--; @@ -108,49 +102,29 @@ lmb_coalesce_regions(struct lmb_region *rgn, unsigned long r1, unsigned long r2) void __init lmb_init(void) { - struct lmb *_lmb = &lmb; - /* Create a dummy zero size LMB which will get coalesced away later. * This simplifies the lmb_add() code below... */ - _lmb->memory.region[0].base = 0; - _lmb->memory.region[0].size = 0; - _lmb->memory.cnt = 1; + lmb.memory.region[0].base = 0; + lmb.memory.region[0].size = 0; + lmb.memory.cnt = 1; /* Ditto. */ - _lmb->reserved.region[0].base = 0; - _lmb->reserved.region[0].size = 0; - _lmb->reserved.cnt = 1; + lmb.reserved.region[0].base = 0; + lmb.reserved.region[0].size = 0; + lmb.reserved.cnt = 1; } /* This routine called with relocation disabled. */ void __init lmb_analyze(void) { - unsigned long i; - unsigned long mem_size = 0; - unsigned long size_mask = 0; - struct lmb *_lmb = &lmb; -#ifdef CONFIG_MSCHUNKS - unsigned long physbase = 0; -#endif - - for (i=0; i < _lmb->memory.cnt; i++) { - unsigned long lmb_size; - - lmb_size = _lmb->memory.region[i].size; - -#ifdef CONFIG_MSCHUNKS - _lmb->memory.region[i].physbase = physbase; - physbase += lmb_size; -#else - _lmb->memory.region[i].physbase = _lmb->memory.region[i].base; -#endif - mem_size += lmb_size; - size_mask |= lmb_size; - } + int i; + + lmb.memory.size = 0; - _lmb->memory.size = mem_size; + for (i = 0; i < lmb.memory.cnt; i++) + lmb.memory.size += lmb.memory.region[i].size; } /* This routine called with relocation disabled. */ @@ -168,7 +142,6 @@ lmb_add_region(struct lmb_region *rgn, unsigned long base, unsigned long size) adjacent = lmb_addrs_adjacent(base,size,rgnbase,rgnsize); if ( adjacent > 0 ) { rgn->region[i].base -= size; - rgn->region[i].physbase -= size; rgn->region[i].size += size; coalesced++; break; @@ -195,11 +168,9 @@ lmb_add_region(struct lmb_region *rgn, unsigned long base, unsigned long size) for (i=rgn->cnt-1; i >= 0; i--) { if (base < rgn->region[i].base) { rgn->region[i+1].base = rgn->region[i].base; - rgn->region[i+1].physbase = rgn->region[i].physbase; rgn->region[i+1].size = rgn->region[i].size; } else { rgn->region[i+1].base = base; - rgn->region[i+1].physbase = lmb_abs_to_phys(base); rgn->region[i+1].size = size; break; } @@ -213,12 +184,11 @@ lmb_add_region(struct lmb_region *rgn, unsigned long base, unsigned long size) long __init lmb_add(unsigned long base, unsigned long size) { - struct lmb *_lmb = &lmb; - struct lmb_region *_rgn = &(_lmb->memory); + struct lmb_region *_rgn = &(lmb.memory); /* On pSeries LPAR systems, the first LMB is our RMO region. */ if ( base == 0 ) - _lmb->rmo_size = size; + lmb.rmo_size = size; return lmb_add_region(_rgn, base, size); @@ -227,8 +197,7 @@ lmb_add(unsigned long base, unsigned long size) long __init lmb_reserve(unsigned long base, unsigned long size) { - struct lmb *_lmb = &lmb; - struct lmb_region *_rgn = &(_lmb->reserved); + struct lmb_region *_rgn = &(lmb.reserved); return lmb_add_region(_rgn, base, size); } @@ -260,13 +229,10 @@ lmb_alloc_base(unsigned long size, unsigned long align, unsigned long max_addr) { long i, j; unsigned long base = 0; - struct lmb *_lmb = &lmb; - struct lmb_region *_mem = &(_lmb->memory); - struct lmb_region *_rsv = &(_lmb->reserved); - for (i=_mem->cnt-1; i >= 0; i--) { - unsigned long lmbbase = _mem->region[i].base; - unsigned long lmbsize = _mem->region[i].size; + for (i=lmb.memory.cnt-1; i >= 0; i--) { + unsigned long lmbbase = lmb.memory.region[i].base; + unsigned long lmbsize = lmb.memory.region[i].size; if ( max_addr == LMB_ALLOC_ANYWHERE ) base = _ALIGN_DOWN(lmbbase+lmbsize-size, align); @@ -276,8 +242,8 @@ lmb_alloc_base(unsigned long size, unsigned long align, unsigned long max_addr) continue; while ( (lmbbase <= base) && - ((j = lmb_overlaps_region(_rsv,base,size)) >= 0) ) { - base = _ALIGN_DOWN(_rsv->region[j].base-size, align); + ((j = lmb_overlaps_region(&lmb.reserved,base,size)) >= 0) ) { + base = _ALIGN_DOWN(lmb.reserved.region[j].base-size, align); } if ( (base != 0) && (lmbbase <= base) ) @@ -287,62 +253,24 @@ lmb_alloc_base(unsigned long size, unsigned long align, unsigned long max_addr) if ( i < 0 ) return 0; - lmb_add_region(_rsv, base, size); + lmb_add_region(&lmb.reserved, base, size); return base; } +/* You must call lmb_analyze() before this. */ unsigned long __init lmb_phys_mem_size(void) { - struct lmb *_lmb = &lmb; -#ifdef CONFIG_MSCHUNKS - return _lmb->memory.size; -#else - struct lmb_region *_mem = &(_lmb->memory); - unsigned long total = 0; - int i; - - /* add all physical memory to the bootmem map */ - for (i=0; i < _mem->cnt; i++) - total += _mem->region[i].size; - return total; -#endif /* CONFIG_MSCHUNKS */ + return lmb.memory.size; } unsigned long __init lmb_end_of_DRAM(void) { - struct lmb *_lmb = &lmb; - struct lmb_region *_mem = &(_lmb->memory); - int idx = _mem->cnt - 1; - -#ifdef CONFIG_MSCHUNKS - return (_mem->region[idx].physbase + _mem->region[idx].size); -#else - return (_mem->region[idx].base + _mem->region[idx].size); -#endif /* CONFIG_MSCHUNKS */ - - return 0; -} - -unsigned long __init -lmb_abs_to_phys(unsigned long aa) -{ - unsigned long i, pa = aa; - struct lmb *_lmb = &lmb; - struct lmb_region *_mem = &(_lmb->memory); - - for (i=0; i < _mem->cnt; i++) { - unsigned long lmbbase = _mem->region[i].base; - unsigned long lmbsize = _mem->region[i].size; - if ( lmb_addrs_overlap(aa,1,lmbbase,lmbsize) ) { - pa = _mem->region[i].physbase + (aa - lmbbase); - break; - } - } + int idx = lmb.memory.cnt - 1; - return pa; + return (lmb.memory.region[idx].base + lmb.memory.region[idx].size); } /* @@ -353,20 +281,19 @@ void __init lmb_enforce_memory_limit(void) { extern unsigned long memory_limit; unsigned long i, limit; - struct lmb_region *mem = &(lmb.memory); if (! memory_limit) return; limit = memory_limit; - for (i = 0; i < mem->cnt; i++) { - if (limit > mem->region[i].size) { - limit -= mem->region[i].size; + for (i = 0; i < lmb.memory.cnt; i++) { + if (limit > lmb.memory.region[i].size) { + limit -= lmb.memory.region[i].size; continue; } - mem->region[i].size = limit; - mem->cnt = i + 1; + lmb.memory.region[i].size = limit; + lmb.memory.cnt = i + 1; break; } } diff --git a/arch/ppc64/kernel/lparcfg.c b/arch/ppc64/kernel/lparcfg.c index 02e96627fa66..cae19bbd5acd 100644 --- a/arch/ppc64/kernel/lparcfg.c +++ b/arch/ppc64/kernel/lparcfg.c @@ -29,7 +29,7 @@ #include <asm/iSeries/HvLpConfig.h> #include <asm/lppaca.h> #include <asm/hvcall.h> -#include <asm/cputable.h> +#include <asm/firmware.h> #include <asm/rtas.h> #include <asm/system.h> #include <asm/time.h> @@ -273,6 +273,7 @@ static void parse_system_parameter_string(struct seq_file *m) if (!workbuffer) { printk(KERN_ERR "%s %s kmalloc failure at line %d \n", __FILE__, __FUNCTION__, __LINE__); + kfree(local_buffer); return; } #ifdef LPARCFG_DEBUG @@ -377,7 +378,7 @@ static int lparcfg_data(struct seq_file *m, void *v) partition_active_processors = lparcfg_count_active_processors(); - if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) { + if (firmware_has_feature(FW_FEATURE_SPLPAR)) { unsigned long h_entitled, h_unallocated; unsigned long h_aggregation, h_resource; unsigned long pool_idle_time, pool_procs; @@ -568,10 +569,10 @@ struct file_operations lparcfg_fops = { int __init lparcfg_init(void) { struct proc_dir_entry *ent; - mode_t mode = S_IRUSR; + mode_t mode = S_IRUSR | S_IRGRP | S_IROTH; /* Allow writing if we have FW_FEATURE_SPLPAR */ - if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) { + if (firmware_has_feature(FW_FEATURE_SPLPAR)) { lparcfg_fops.write = lparcfg_write; mode |= S_IWUSR; } diff --git a/arch/ppc64/kernel/maple_pci.c b/arch/ppc64/kernel/maple_pci.c index 53993999b265..1d297e0edfc0 100644 --- a/arch/ppc64/kernel/maple_pci.c +++ b/arch/ppc64/kernel/maple_pci.c @@ -283,7 +283,7 @@ static void __init setup_u3_agp(struct pci_controller* hose) * the reg address cell, we shall fix that by killing struct * reg_property and using some accessor functions instead */ - hose->first_busno = 0xf0; + hose->first_busno = 0xf0; hose->last_busno = 0xff; hose->ops = &u3_agp_pci_ops; hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); @@ -315,24 +315,24 @@ static int __init add_bridge(struct device_node *dev) char* disp_name; int *bus_range; int primary = 1; - struct property *of_prop; + struct property *of_prop; DBG("Adding PCI host bridge %s\n", dev->full_name); - bus_range = (int *) get_property(dev, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", - dev->full_name); - } + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", + dev->full_name); + } hose = alloc_bootmem(sizeof(struct pci_controller)); if (hose == NULL) return -ENOMEM; - pci_setup_pci_controller(hose); + pci_setup_pci_controller(hose); - hose->arch_data = dev; - hose->first_busno = bus_range ? bus_range[0] : 0; - hose->last_busno = bus_range ? bus_range[1] : 0xff; + hose->arch_data = dev; + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; of_prop = alloc_bootmem(sizeof(struct property) + sizeof(hose->global_number)); @@ -346,25 +346,25 @@ static int __init add_bridge(struct device_node *dev) } disp_name = NULL; - if (device_is_compatible(dev, "u3-agp")) { - setup_u3_agp(hose); - disp_name = "U3-AGP"; - primary = 0; - } else if (device_is_compatible(dev, "u3-ht")) { - setup_u3_ht(hose); - disp_name = "U3-HT"; - primary = 1; - } - printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", - disp_name, hose->first_busno, hose->last_busno); - - /* Interpret the "ranges" property */ - /* This also maps the I/O region and sets isa_io/mem_base */ - pci_process_bridge_OF_ranges(hose, dev); + if (device_is_compatible(dev, "u3-agp")) { + setup_u3_agp(hose); + disp_name = "U3-AGP"; + primary = 0; + } else if (device_is_compatible(dev, "u3-ht")) { + setup_u3_ht(hose); + disp_name = "U3-HT"; + primary = 1; + } + printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", + disp_name, hose->first_busno, hose->last_busno); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev); pci_setup_phb_io(hose, primary); - /* Fixup "bus-range" OF property */ - fixup_bus_range(dev); + /* Fixup "bus-range" OF property */ + fixup_bus_range(dev); return 0; } @@ -447,9 +447,9 @@ void __init maple_pci_init(void) */ if (u3_agp) { struct device_node *np = u3_agp->arch_data; - np->busno = 0xf0; + PCI_DN(np)->busno = 0xf0; for (np = np->child; np; np = np->sibling) - np->busno = 0xf0; + PCI_DN(np)->busno = 0xf0; } /* Tell pci.c to use the common resource allocation mecanism */ diff --git a/arch/ppc64/kernel/maple_setup.c b/arch/ppc64/kernel/maple_setup.c index bb55b5a56910..fc0567498a3a 100644 --- a/arch/ppc64/kernel/maple_setup.c +++ b/arch/ppc64/kernel/maple_setup.c @@ -207,9 +207,6 @@ static void __init maple_init_early(void) comport = (void *)ioremap(physport, 16); udbg_init_uart(comport, default_speed); - ppc_md.udbg_putc = udbg_putc; - ppc_md.udbg_getc = udbg_getc; - ppc_md.udbg_getc_poll = udbg_getc_poll; DBG("Hello World !\n"); } diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S index a05b50b738e9..e7241ad80a08 100644 --- a/arch/ppc64/kernel/misc.S +++ b/arch/ppc64/kernel/misc.S @@ -26,7 +26,7 @@ #include <asm/page.h> #include <asm/cache.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/cputable.h> .text @@ -183,7 +183,7 @@ PPC64_CACHES: * flush all bytes from start through stop-1 inclusive */ -_GLOBAL(__flush_icache_range) +_KPROBE(__flush_icache_range) /* * Flush the data cache to memory @@ -223,7 +223,7 @@ _GLOBAL(__flush_icache_range) bdnz 2b isync blr - + .previous .text /* * Like above, but only do the D-cache. * @@ -680,6 +680,104 @@ _GLOBAL(kernel_thread) ld r30,-16(r1) blr +/* + * disable_kernel_fp() + * Disable the FPU. + */ +_GLOBAL(disable_kernel_fp) + mfmsr r3 + rldicl r0,r3,(63-MSR_FP_LG),1 + rldicl r3,r0,(MSR_FP_LG+1),0 + mtmsrd r3 /* disable use of fpu now */ + isync + blr + +/* + * giveup_fpu(tsk) + * Disable FP for the task given as the argument, + * and save the floating-point registers in its thread_struct. + * Enables the FPU for use in the kernel on return. + */ +_GLOBAL(giveup_fpu) + mfmsr r5 + ori r5,r5,MSR_FP + mtmsrd r5 /* enable use of fpu now */ + isync + cmpdi 0,r3,0 + beqlr- /* if no previous owner, done */ + addi r3,r3,THREAD /* want THREAD of task */ + ld r5,PT_REGS(r3) + cmpdi 0,r5,0 + SAVE_32FPRS(0, r3) + mffs fr0 + stfd fr0,THREAD_FPSCR(r3) + beq 1f + ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) + li r3,MSR_FP|MSR_FE0|MSR_FE1 + andc r4,r4,r3 /* disable FP for previous task */ + std r4,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#ifndef CONFIG_SMP + li r5,0 + ld r4,last_task_used_math@got(r2) + std r5,0(r4) +#endif /* CONFIG_SMP */ + blr + +#ifdef CONFIG_ALTIVEC + +#if 0 /* this has no callers for now */ +/* + * disable_kernel_altivec() + * Disable the VMX. + */ +_GLOBAL(disable_kernel_altivec) + mfmsr r3 + rldicl r0,r3,(63-MSR_VEC_LG),1 + rldicl r3,r0,(MSR_VEC_LG+1),0 + mtmsrd r3 /* disable use of VMX now */ + isync + blr +#endif /* 0 */ + +/* + * giveup_altivec(tsk) + * Disable VMX for the task given as the argument, + * and save the vector registers in its thread_struct. + * Enables the VMX for use in the kernel on return. + */ +_GLOBAL(giveup_altivec) + mfmsr r5 + oris r5,r5,MSR_VEC@h + mtmsrd r5 /* enable use of VMX now */ + isync + cmpdi 0,r3,0 + beqlr- /* if no previous owner, done */ + addi r3,r3,THREAD /* want THREAD of task */ + ld r5,PT_REGS(r3) + cmpdi 0,r5,0 + SAVE_32VRS(0,r4,r3) + mfvscr vr0 + li r4,THREAD_VSCR + stvx vr0,r4,r3 + beq 1f + ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) + lis r3,MSR_VEC@h + andc r4,r4,r3 /* disable FP for previous task */ + std r4,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#ifndef CONFIG_SMP + li r5,0 + ld r4,last_task_used_altivec@got(r2) + std r5,0(r4) +#endif /* CONFIG_SMP */ + blr + +#endif /* CONFIG_ALTIVEC */ + +_GLOBAL(__setup_cpu_power3) + blr + /* kexec_wait(phys_cpu) * * wait for the flag to change, indicating this kernel is going away but @@ -859,7 +957,7 @@ _GLOBAL(sys_call_table32) .llong .ppc_fork .llong .sys_read .llong .sys_write - .llong .sys32_open /* 5 */ + .llong .compat_sys_open /* 5 */ .llong .sys_close .llong .sys32_waitpid .llong .sys32_creat @@ -1333,9 +1431,9 @@ _GLOBAL(sys_call_table) .llong .sys_ni_syscall /* 195 - 32bit only stat64 */ .llong .sys_ni_syscall /* 32bit only lstat64 */ .llong .sys_ni_syscall /* 32bit only fstat64 */ - .llong .sys_ni_syscall /* 32bit only pciconfig_read */ - .llong .sys_ni_syscall /* 32bit only pciconfig_write */ - .llong .sys_ni_syscall /* 32bit only pciconfig_iobase */ + .llong .sys_pciconfig_read + .llong .sys_pciconfig_write + .llong .sys_pciconfig_iobase /* 200 - pciconfig_iobase */ .llong .sys_ni_syscall /* reserved for MacOnLinux */ .llong .sys_getdents64 .llong .sys_pivot_root diff --git a/arch/ppc64/kernel/of_device.c b/arch/ppc64/kernel/of_device.c index b80e81984ba8..da580812ddfe 100644 --- a/arch/ppc64/kernel/of_device.c +++ b/arch/ppc64/kernel/of_device.c @@ -236,7 +236,6 @@ void of_device_unregister(struct of_device *ofdev) struct of_device* of_platform_device_create(struct device_node *np, const char *bus_id) { struct of_device *dev; - u32 *reg; dev = kmalloc(sizeof(*dev), GFP_KERNEL); if (!dev) @@ -250,7 +249,6 @@ struct of_device* of_platform_device_create(struct device_node *np, const char * dev->dev.bus = &of_platform_bus_type; dev->dev.release = of_release_dev; - reg = (u32 *)get_property(np, "reg", NULL); strlcpy(dev->dev.bus_id, bus_id, BUS_ID_SIZE); if (of_device_register(dev) != 0) { diff --git a/arch/ppc64/kernel/pSeries_iommu.c b/arch/ppc64/kernel/pSeries_iommu.c index 69130522a87e..f0fd7fbd6531 100644 --- a/arch/ppc64/kernel/pSeries_iommu.c +++ b/arch/ppc64/kernel/pSeries_iommu.c @@ -45,6 +45,7 @@ #include <asm/plpar_wrappers.h> #include <asm/pSeries_reconfig.h> #include <asm/systemcfg.h> +#include <asm/firmware.h> #include "pci.h" #define DBG(fmt...) @@ -294,7 +295,7 @@ static void iommu_table_setparms_lpar(struct pci_controller *phb, struct iommu_table *tbl, unsigned int *dma_window) { - tbl->it_busno = dn->bussubno; + tbl->it_busno = PCI_DN(dn)->bussubno; /* TODO: Parse field size properties properly. */ tbl->it_size = (((unsigned long)dma_window[4] << 32) | @@ -310,6 +311,7 @@ static void iommu_table_setparms_lpar(struct pci_controller *phb, static void iommu_bus_setup_pSeries(struct pci_bus *bus) { struct device_node *dn, *pdn; + struct pci_dn *pci; struct iommu_table *tbl; DBG("iommu_bus_setup_pSeries, bus %p, bus->self %p\n", bus, bus->self); @@ -324,6 +326,7 @@ static void iommu_bus_setup_pSeries(struct pci_bus *bus) */ dn = pci_bus_to_OF_node(bus); + pci = dn->data; if (!bus->self) { /* Root bus */ @@ -340,18 +343,18 @@ static void iommu_bus_setup_pSeries(struct pci_bus *bus) * alltogether. This leaves 768MB for the window. */ DBG("PHB has io-hole, reserving 256MB\n"); - dn->phb->dma_window_size = 3 << 28; - dn->phb->dma_window_base_cur = 1 << 28; + pci->phb->dma_window_size = 3 << 28; + pci->phb->dma_window_base_cur = 1 << 28; } else { /* 1GB window by default */ - dn->phb->dma_window_size = 1 << 30; - dn->phb->dma_window_base_cur = 0; + pci->phb->dma_window_size = 1 << 30; + pci->phb->dma_window_base_cur = 0; } tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL); - iommu_table_setparms(dn->phb, dn, tbl); - dn->iommu_table = iommu_init_table(tbl); + iommu_table_setparms(pci->phb, dn, tbl); + pci->iommu_table = iommu_init_table(tbl); } else { /* Do a 128MB table at root. This is used for the IDE * controller on some SMP-mode POWER4 machines. It @@ -362,16 +365,16 @@ static void iommu_bus_setup_pSeries(struct pci_bus *bus) * Allocate at offset 128MB to avoid having to deal * with ISA holes; 128MB table for IDE is plenty. */ - dn->phb->dma_window_size = 1 << 27; - dn->phb->dma_window_base_cur = 1 << 27; + pci->phb->dma_window_size = 1 << 27; + pci->phb->dma_window_base_cur = 1 << 27; tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL); - iommu_table_setparms(dn->phb, dn, tbl); - dn->iommu_table = iommu_init_table(tbl); + iommu_table_setparms(pci->phb, dn, tbl); + pci->iommu_table = iommu_init_table(tbl); /* All child buses have 256MB tables */ - dn->phb->dma_window_size = 1 << 28; + pci->phb->dma_window_size = 1 << 28; } } else { pdn = pci_bus_to_OF_node(bus->parent); @@ -385,12 +388,12 @@ static void iommu_bus_setup_pSeries(struct pci_bus *bus) tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL); - iommu_table_setparms(dn->phb, dn, tbl); + iommu_table_setparms(pci->phb, dn, tbl); - dn->iommu_table = iommu_init_table(tbl); + pci->iommu_table = iommu_init_table(tbl); } else { /* Lower than first child or under python, use parent table */ - dn->iommu_table = pdn->iommu_table; + pci->iommu_table = PCI_DN(pdn)->iommu_table; } } } @@ -400,6 +403,7 @@ static void iommu_bus_setup_pSeriesLP(struct pci_bus *bus) { struct iommu_table *tbl; struct device_node *dn, *pdn; + struct pci_dn *ppci; unsigned int *dma_window = NULL; DBG("iommu_bus_setup_pSeriesLP, bus %p, bus->self %p\n", bus, bus->self); @@ -418,22 +422,24 @@ static void iommu_bus_setup_pSeriesLP(struct pci_bus *bus) return; } - if (!pdn->iommu_table) { + ppci = pdn->data; + if (!ppci->iommu_table) { /* Bussubno hasn't been copied yet. * Do it now because iommu_table_setparms_lpar needs it. */ - pdn->bussubno = bus->number; + + ppci->bussubno = bus->number; tbl = (struct iommu_table *)kmalloc(sizeof(struct iommu_table), GFP_KERNEL); - iommu_table_setparms_lpar(pdn->phb, pdn, tbl, dma_window); + iommu_table_setparms_lpar(ppci->phb, pdn, tbl, dma_window); - pdn->iommu_table = iommu_init_table(tbl); + ppci->iommu_table = iommu_init_table(tbl); } if (pdn != dn) - dn->iommu_table = pdn->iommu_table; + PCI_DN(dn)->iommu_table = ppci->iommu_table; } @@ -448,11 +454,11 @@ static void iommu_dev_setup_pSeries(struct pci_dev *dev) */ mydn = dn = pci_device_to_OF_node(dev); - while (dn && dn->iommu_table == NULL) + while (dn && dn->data && PCI_DN(dn)->iommu_table == NULL) dn = dn->parent; - if (dn) { - mydn->iommu_table = dn->iommu_table; + if (dn && dn->data) { + PCI_DN(mydn)->iommu_table = PCI_DN(dn)->iommu_table; } else { DBG("iommu_dev_setup_pSeries, dev %p (%s) has no iommu table\n", dev, dev->pretty_name); } @@ -462,10 +468,11 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti { int err = NOTIFY_OK; struct device_node *np = node; + struct pci_dn *pci = np->data; switch (action) { case PSERIES_RECONFIG_REMOVE: - if (np->iommu_table && + if (pci->iommu_table && get_property(np, "ibm,dma-window", NULL)) iommu_free_table(np); break; @@ -485,6 +492,7 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev) struct device_node *pdn, *dn; struct iommu_table *tbl; int *dma_window = NULL; + struct pci_dn *pci; DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, dev->pretty_name); @@ -496,8 +504,10 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev) */ dn = pci_device_to_OF_node(dev); - for (pdn = dn; pdn && !pdn->iommu_table; pdn = pdn->parent) { - dma_window = (unsigned int *)get_property(pdn, "ibm,dma-window", NULL); + for (pdn = dn; pdn && pdn->data && !PCI_DN(pdn)->iommu_table; + pdn = pdn->parent) { + dma_window = (unsigned int *) + get_property(pdn, "ibm,dma-window", NULL); if (dma_window) break; } @@ -514,20 +524,21 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev) DBG("Found DMA window, allocating table\n"); } - if (!pdn->iommu_table) { + pci = pdn->data; + if (!pci->iommu_table) { /* iommu_table_setparms_lpar needs bussubno. */ - pdn->bussubno = pdn->phb->bus->number; + pci->bussubno = pci->phb->bus->number; tbl = (struct iommu_table *)kmalloc(sizeof(struct iommu_table), GFP_KERNEL); - iommu_table_setparms_lpar(pdn->phb, pdn, tbl, dma_window); + iommu_table_setparms_lpar(pci->phb, pdn, tbl, dma_window); - pdn->iommu_table = iommu_init_table(tbl); + pci->iommu_table = iommu_init_table(tbl); } if (pdn != dn) - dn->iommu_table = pdn->iommu_table; + PCI_DN(dn)->iommu_table = pci->iommu_table; } static void iommu_bus_setup_null(struct pci_bus *b) { } @@ -546,7 +557,7 @@ void iommu_init_early_pSeries(void) } if (systemcfg->platform & PLATFORM_LPAR) { - if (cur_cpu_spec->firmware_features & FW_FEATURE_MULTITCE) { + if (firmware_has_feature(FW_FEATURE_MULTITCE)) { ppc_md.tce_build = tce_buildmulti_pSeriesLP; ppc_md.tce_free = tce_freemulti_pSeriesLP; } else { diff --git a/arch/ppc64/kernel/pSeries_lpar.c b/arch/ppc64/kernel/pSeries_lpar.c index 74dd144dcce8..a6de83f2078f 100644 --- a/arch/ppc64/kernel/pSeries_lpar.c +++ b/arch/ppc64/kernel/pSeries_lpar.c @@ -52,7 +52,6 @@ EXPORT_SYMBOL(plpar_hcall_4out); EXPORT_SYMBOL(plpar_hcall_norets); EXPORT_SYMBOL(plpar_hcall_8arg_2ret); -extern void fw_feature_init(void); extern void pSeries_find_serial_port(void); @@ -193,9 +192,9 @@ static unsigned char udbg_getcLP(void) void udbg_init_debug_lpar(void) { vtermno = 0; - ppc_md.udbg_putc = udbg_putcLP; - ppc_md.udbg_getc = udbg_getcLP; - ppc_md.udbg_getc_poll = udbg_getc_pollLP; + udbg_putc = udbg_putcLP; + udbg_getc = udbg_getcLP; + udbg_getc_poll = udbg_getc_pollLP; } /* returns 0 if couldn't find or use /chosen/stdout as console */ @@ -228,18 +227,18 @@ int find_udbg_vterm(void) termno = (u32 *)get_property(stdout_node, "reg", NULL); if (termno) { vtermno = termno[0]; - ppc_md.udbg_putc = udbg_putcLP; - ppc_md.udbg_getc = udbg_getcLP; - ppc_md.udbg_getc_poll = udbg_getc_pollLP; + udbg_putc = udbg_putcLP; + udbg_getc = udbg_getcLP; + udbg_getc_poll = udbg_getc_pollLP; found = 1; } } else if (device_is_compatible(stdout_node, "hvterm-protocol")) { termno = (u32 *)get_property(stdout_node, "reg", NULL); if (termno) { vtermno = termno[0]; - ppc_md.udbg_putc = udbg_hvsi_putc; - ppc_md.udbg_getc = udbg_hvsi_getc; - ppc_md.udbg_getc_poll = udbg_hvsi_getc_poll; + udbg_putc = udbg_hvsi_putc; + udbg_getc = udbg_hvsi_getc; + udbg_getc_poll = udbg_hvsi_getc_poll; found = 1; } } @@ -267,6 +266,10 @@ void vpa_init(int cpu) /* Register the Virtual Processor Area (VPA) */ flags = 1UL << (63 - 18); + + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + paca[cpu].lppaca.vmxregs_in_use = 1; + ret = register_vpa(flags, hwcpu, __pa(vpa)); if (ret) @@ -279,7 +282,6 @@ long pSeries_lpar_hpte_insert(unsigned long hpte_group, unsigned long va, unsigned long prpn, unsigned long vflags, unsigned long rflags) { - unsigned long arpn = physRpn_to_absRpn(prpn); unsigned long lpar_rc; unsigned long flags; unsigned long slot; @@ -290,7 +292,7 @@ long pSeries_lpar_hpte_insert(unsigned long hpte_group, if (vflags & HPTE_V_LARGE) hpte_v &= ~(1UL << HPTE_V_AVPN_SHIFT); - hpte_r = (arpn << HPTE_R_RPN_SHIFT) | rflags; + hpte_r = (prpn << HPTE_R_RPN_SHIFT) | rflags; /* Now fill in the actual HPTE */ /* Set CEC cookie to 0 */ diff --git a/arch/ppc64/kernel/pSeries_reconfig.c b/arch/ppc64/kernel/pSeries_reconfig.c index dc2a69d412a2..58c61219d08e 100644 --- a/arch/ppc64/kernel/pSeries_reconfig.c +++ b/arch/ppc64/kernel/pSeries_reconfig.c @@ -111,7 +111,7 @@ static int pSeries_reconfig_add_node(const char *path, struct property *proplist struct device_node *np; int err = -ENOMEM; - np = kcalloc(1, sizeof(*np), GFP_KERNEL); + np = kzalloc(sizeof(*np), GFP_KERNEL); if (!np) goto out_err; diff --git a/arch/ppc64/kernel/pSeries_setup.c b/arch/ppc64/kernel/pSeries_setup.c index 5bec956e44a0..3009701eb90d 100644 --- a/arch/ppc64/kernel/pSeries_setup.c +++ b/arch/ppc64/kernel/pSeries_setup.c @@ -37,7 +37,7 @@ #include <linux/ioport.h> #include <linux/console.h> #include <linux/pci.h> -#include <linux/version.h> +#include <linux/utsname.h> #include <linux/adb.h> #include <linux/module.h> #include <linux/delay.h> @@ -60,7 +60,8 @@ #include <asm/nvram.h> #include <asm/plpar_wrappers.h> #include <asm/xics.h> -#include <asm/cputable.h> +#include <asm/firmware.h> +#include <asm/pmc.h> #include "i8259.h" #include "mpic.h" @@ -187,6 +188,21 @@ static void __init pSeries_setup_mpic(void) " MPIC "); } +static void pseries_lpar_enable_pmcs(void) +{ + unsigned long set, reset; + + power4_enable_pmcs(); + + set = 1UL << 63; + reset = 0; + plpar_hcall_norets(H_PERFMON, set, reset); + + /* instruct hypervisor to maintain PMCs */ + if (firmware_has_feature(FW_FEATURE_SPLPAR)) + get_paca()->lppaca.pmcregs_in_use = 1; +} + static void __init pSeries_setup_arch(void) { /* Fixup ppc_md depending on the type of interrupt controller */ @@ -222,8 +238,8 @@ static void __init pSeries_setup_arch(void) /* Find and initialize PCI host bridges */ init_pci_config_tokens(); - eeh_init(); find_and_init_phbs(); + eeh_init(); #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; @@ -231,11 +247,9 @@ static void __init pSeries_setup_arch(void) pSeries_nvram_init(); - if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) - vpa_init(boot_cpuid); - /* Choose an idle loop */ - if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) { + if (firmware_has_feature(FW_FEATURE_SPLPAR)) { + vpa_init(boot_cpuid); if (get_paca()->lppaca.shared_proc) { printk(KERN_INFO "Using shared processor idle loop\n"); ppc_md.idle_loop = pseries_shared_idle; @@ -247,24 +261,29 @@ static void __init pSeries_setup_arch(void) printk(KERN_INFO "Using default idle loop\n"); ppc_md.idle_loop = default_idle; } + + if (systemcfg->platform & PLATFORM_LPAR) + ppc_md.enable_pmcs = pseries_lpar_enable_pmcs; + else + ppc_md.enable_pmcs = power4_enable_pmcs; } static int __init pSeries_init_panel(void) { /* Manually leave the kernel version on the panel. */ ppc_md.progress("Linux ppc64\n", 0); - ppc_md.progress(UTS_RELEASE, 0); + ppc_md.progress(system_utsname.version, 0); return 0; } arch_initcall(pSeries_init_panel); -/* Build up the firmware_features bitmask field +/* Build up the ppc64_firmware_features bitmask field * using contents of device-tree/ibm,hypertas-functions. * Ultimately this functionality may be moved into prom.c prom_init(). */ -void __init fw_feature_init(void) +static void __init fw_feature_init(void) { struct device_node * dn; char * hypertas; @@ -272,7 +291,7 @@ void __init fw_feature_init(void) DBG(" -> fw_feature_init()\n"); - cur_cpu_spec->firmware_features = 0; + ppc64_firmware_features = 0; dn = of_find_node_by_path("/rtas"); if (dn == NULL) { printk(KERN_ERR "WARNING ! Cannot find RTAS in device-tree !\n"); @@ -288,7 +307,7 @@ void __init fw_feature_init(void) if ((firmware_features_table[i].name) && (strcmp(firmware_features_table[i].name,hypertas))==0) { /* we have a match */ - cur_cpu_spec->firmware_features |= + ppc64_firmware_features |= (firmware_features_table[i].val); break; } @@ -302,7 +321,7 @@ void __init fw_feature_init(void) of_node_put(dn); no_rtas: printk(KERN_INFO "firmware_features = 0x%lx\n", - cur_cpu_spec->firmware_features); + ppc64_firmware_features); DBG(" <- fw_feature_init()\n"); } @@ -378,9 +397,6 @@ static void __init pSeries_init_early(void) comport = (void *)ioremap(physport, 16); udbg_init_uart(comport, default_speed); - ppc_md.udbg_putc = udbg_putc; - ppc_md.udbg_getc = udbg_getc; - ppc_md.udbg_getc_poll = udbg_getc_poll; DBG("Hello World !\n"); } @@ -574,6 +590,13 @@ static int pseries_shared_idle(void) return 0; } +static int pSeries_pci_probe_mode(struct pci_bus *bus) +{ + if (systemcfg->platform & PLATFORM_LPAR) + return PCI_PROBE_DEVTREE; + return PCI_PROBE_NORMAL; +} + struct machdep_calls __initdata pSeries_md = { .probe = pSeries_probe, .setup_arch = pSeries_setup_arch, @@ -581,6 +604,7 @@ struct machdep_calls __initdata pSeries_md = { .get_cpuinfo = pSeries_get_cpuinfo, .log_error = pSeries_log_error, .pcibios_fixup = pSeries_final_fixup, + .pci_probe_mode = pSeries_pci_probe_mode, .irq_bus_setup = pSeries_irq_bus_setup, .restart = rtas_restart, .power_off = rtas_power_off, diff --git a/arch/ppc64/kernel/pSeries_smp.c b/arch/ppc64/kernel/pSeries_smp.c index 62c55a123560..d2c7e2c4733b 100644 --- a/arch/ppc64/kernel/pSeries_smp.c +++ b/arch/ppc64/kernel/pSeries_smp.c @@ -41,6 +41,7 @@ #include <asm/machdep.h> #include <asm/xics.h> #include <asm/cputable.h> +#include <asm/firmware.h> #include <asm/system.h> #include <asm/rtas.h> #include <asm/plpar_wrappers.h> @@ -271,6 +272,7 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu) unsigned long start_here = __pa((u32)*((unsigned long *) pSeries_secondary_smp_init)); unsigned int pcpu; + int start_cpu; if (cpu_isset(lcpu, of_spin_map)) /* Already started by OF and sitting in spin loop */ @@ -281,12 +283,20 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu) /* Fixup atomic count: it exited inside IRQ handler. */ paca[lcpu].__current->thread_info->preempt_count = 0; - status = rtas_call(rtas_token("start-cpu"), 3, 1, NULL, - pcpu, start_here, lcpu); + /* + * If the RTAS start-cpu token does not exist then presume the + * cpu is already spinning. + */ + start_cpu = rtas_token("start-cpu"); + if (start_cpu == RTAS_UNKNOWN_SERVICE) + return 1; + + status = rtas_call(start_cpu, 3, 1, NULL, pcpu, start_here, lcpu); if (status != 0) { printk(KERN_ERR "start-cpu failed: %i\n", status); return 0; } + return 1; } @@ -326,7 +336,7 @@ static void __devinit smp_xics_setup_cpu(int cpu) if (cpu != boot_cpuid) xics_setup_cpu(); - if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) + if (firmware_has_feature(FW_FEATURE_SPLPAR)) vpa_init(cpu); cpu_clear(cpu, of_spin_map); diff --git a/arch/ppc64/kernel/pSeries_vio.c b/arch/ppc64/kernel/pSeries_vio.c new file mode 100644 index 000000000000..e0ae06f58f86 --- /dev/null +++ b/arch/ppc64/kernel/pSeries_vio.c @@ -0,0 +1,273 @@ +/* + * IBM PowerPC pSeries Virtual I/O Infrastructure Support. + * + * Copyright (c) 2003-2005 IBM Corp. + * Dave Engebretsen engebret@us.ibm.com + * Santiago Leon santil@us.ibm.com + * Hollis Blanchard <hollisb@us.ibm.com> + * Stephen Rothwell + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/kobject.h> +#include <asm/iommu.h> +#include <asm/dma.h> +#include <asm/prom.h> +#include <asm/vio.h> +#include <asm/hvcall.h> + +extern struct subsystem devices_subsys; /* needed for vio_find_name() */ + +static void probe_bus_pseries(void) +{ + struct device_node *node_vroot, *of_node; + + node_vroot = find_devices("vdevice"); + if ((node_vroot == NULL) || (node_vroot->child == NULL)) + /* this machine doesn't do virtual IO, and that's ok */ + return; + + /* + * Create struct vio_devices for each virtual device in the device tree. + * Drivers will associate with them later. + */ + for (of_node = node_vroot->child; of_node != NULL; + of_node = of_node->sibling) { + printk(KERN_DEBUG "%s: processing %p\n", __FUNCTION__, of_node); + vio_register_device_node(of_node); + } +} + +/** + * vio_match_device_pseries: - Tell if a pSeries VIO device matches a + * vio_device_id + */ +static int vio_match_device_pseries(const struct vio_device_id *id, + const struct vio_dev *dev) +{ + return (strncmp(dev->type, id->type, strlen(id->type)) == 0) && + device_is_compatible(dev->dev.platform_data, id->compat); +} + +static void vio_release_device_pseries(struct device *dev) +{ + /* XXX free TCE table */ + of_node_put(dev->platform_data); +} + +static ssize_t viodev_show_devspec(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct device_node *of_node = dev->platform_data; + + return sprintf(buf, "%s\n", of_node->full_name); +} +DEVICE_ATTR(devspec, S_IRUSR | S_IRGRP | S_IROTH, viodev_show_devspec, NULL); + +static void vio_unregister_device_pseries(struct vio_dev *viodev) +{ + device_remove_file(&viodev->dev, &dev_attr_devspec); +} + +static struct vio_bus_ops vio_bus_ops_pseries = { + .match = vio_match_device_pseries, + .unregister_device = vio_unregister_device_pseries, + .release_device = vio_release_device_pseries, +}; + +/** + * vio_bus_init_pseries: - Initialize the pSeries virtual IO bus + */ +static int __init vio_bus_init_pseries(void) +{ + int err; + + err = vio_bus_init(&vio_bus_ops_pseries); + if (err == 0) + probe_bus_pseries(); + return err; +} + +__initcall(vio_bus_init_pseries); + +/** + * vio_build_iommu_table: - gets the dma information from OF and + * builds the TCE tree. + * @dev: the virtual device. + * + * Returns a pointer to the built tce tree, or NULL if it can't + * find property. +*/ +static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev) +{ + unsigned int *dma_window; + struct iommu_table *newTceTable; + unsigned long offset; + int dma_window_property_size; + + dma_window = (unsigned int *) get_property(dev->dev.platform_data, "ibm,my-dma-window", &dma_window_property_size); + if(!dma_window) { + return NULL; + } + + newTceTable = (struct iommu_table *) kmalloc(sizeof(struct iommu_table), GFP_KERNEL); + + /* There should be some code to extract the phys-encoded offset + using prom_n_addr_cells(). However, according to a comment + on earlier versions, it's always zero, so we don't bother */ + offset = dma_window[1] >> PAGE_SHIFT; + + /* TCE table size - measured in tce entries */ + newTceTable->it_size = dma_window[4] >> PAGE_SHIFT; + /* offset for VIO should always be 0 */ + newTceTable->it_offset = offset; + newTceTable->it_busno = 0; + newTceTable->it_index = (unsigned long)dma_window[0]; + newTceTable->it_type = TCE_VB; + + return iommu_init_table(newTceTable); +} + +/** + * vio_register_device_node: - Register a new vio device. + * @of_node: The OF node for this device. + * + * Creates and initializes a vio_dev structure from the data in + * of_node (dev.platform_data) and adds it to the list of virtual devices. + * Returns a pointer to the created vio_dev or NULL if node has + * NULL device_type or compatible fields. + */ +struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node) +{ + struct vio_dev *viodev; + unsigned int *unit_address; + unsigned int *irq_p; + + /* we need the 'device_type' property, in order to match with drivers */ + if ((NULL == of_node->type)) { + printk(KERN_WARNING + "%s: node %s missing 'device_type'\n", __FUNCTION__, + of_node->name ? of_node->name : "<unknown>"); + return NULL; + } + + unit_address = (unsigned int *)get_property(of_node, "reg", NULL); + if (!unit_address) { + printk(KERN_WARNING "%s: node %s missing 'reg'\n", __FUNCTION__, + of_node->name ? of_node->name : "<unknown>"); + return NULL; + } + + /* allocate a vio_dev for this node */ + viodev = kmalloc(sizeof(struct vio_dev), GFP_KERNEL); + if (!viodev) { + return NULL; + } + memset(viodev, 0, sizeof(struct vio_dev)); + + viodev->dev.platform_data = of_node_get(of_node); + + viodev->irq = NO_IRQ; + irq_p = (unsigned int *)get_property(of_node, "interrupts", NULL); + if (irq_p) { + int virq = virt_irq_create_mapping(*irq_p); + if (virq == NO_IRQ) { + printk(KERN_ERR "Unable to allocate interrupt " + "number for %s\n", of_node->full_name); + } else + viodev->irq = irq_offset_up(virq); + } + + snprintf(viodev->dev.bus_id, BUS_ID_SIZE, "%x", *unit_address); + viodev->name = of_node->name; + viodev->type = of_node->type; + viodev->unit_address = *unit_address; + viodev->iommu_table = vio_build_iommu_table(viodev); + + /* register with generic device framework */ + if (vio_register_device(viodev) == NULL) { + /* XXX free TCE table */ + kfree(viodev); + return NULL; + } + device_create_file(&viodev->dev, &dev_attr_devspec); + + return viodev; +} +EXPORT_SYMBOL(vio_register_device_node); + +/** + * vio_get_attribute: - get attribute for virtual device + * @vdev: The vio device to get property. + * @which: The property/attribute to be extracted. + * @length: Pointer to length of returned data size (unused if NULL). + * + * Calls prom.c's get_property() to return the value of the + * attribute specified by the preprocessor constant @which +*/ +const void * vio_get_attribute(struct vio_dev *vdev, void* which, int* length) +{ + return get_property(vdev->dev.platform_data, (char*)which, length); +} +EXPORT_SYMBOL(vio_get_attribute); + +/* vio_find_name() - internal because only vio.c knows how we formatted the + * kobject name + * XXX once vio_bus_type.devices is actually used as a kset in + * drivers/base/bus.c, this function should be removed in favor of + * "device_find(kobj_name, &vio_bus_type)" + */ +static struct vio_dev *vio_find_name(const char *kobj_name) +{ + struct kobject *found; + + found = kset_find_obj(&devices_subsys.kset, kobj_name); + if (!found) + return NULL; + + return to_vio_dev(container_of(found, struct device, kobj)); +} + +/** + * vio_find_node - find an already-registered vio_dev + * @vnode: device_node of the virtual device we're looking for + */ +struct vio_dev *vio_find_node(struct device_node *vnode) +{ + uint32_t *unit_address; + char kobj_name[BUS_ID_SIZE]; + + /* construct the kobject name from the device node */ + unit_address = (uint32_t *)get_property(vnode, "reg", NULL); + if (!unit_address) + return NULL; + snprintf(kobj_name, BUS_ID_SIZE, "%x", *unit_address); + + return vio_find_name(kobj_name); +} +EXPORT_SYMBOL(vio_find_node); + +int vio_enable_interrupts(struct vio_dev *dev) +{ + int rc = h_vio_signal(dev->unit_address, VIO_IRQ_ENABLE); + if (rc != H_Success) + printk(KERN_ERR "vio: Error 0x%x enabling interrupts\n", rc); + return rc; +} +EXPORT_SYMBOL(vio_enable_interrupts); + +int vio_disable_interrupts(struct vio_dev *dev) +{ + int rc = h_vio_signal(dev->unit_address, VIO_IRQ_DISABLE); + if (rc != H_Success) + printk(KERN_ERR "vio: Error 0x%x disabling interrupts\n", rc); + return rc; +} +EXPORT_SYMBOL(vio_disable_interrupts); diff --git a/arch/ppc64/kernel/pacaData.c b/arch/ppc64/kernel/pacaData.c index 6316188737b6..33a2d8db3f21 100644 --- a/arch/ppc64/kernel/pacaData.c +++ b/arch/ppc64/kernel/pacaData.c @@ -59,6 +59,7 @@ extern unsigned long __toc_start; .fpregs_in_use = 1, \ .end_of_quantum = 0xfffffffffffffffful, \ .slb_count = 64, \ + .vmxregs_in_use = 0, \ }, \ #ifdef CONFIG_PPC_ISERIES @@ -78,7 +79,7 @@ extern unsigned long __toc_start; #define BOOTCPU_PACA_INIT(number) \ { \ - PACA_INIT_COMMON(number, 1, 0, STAB0_VIRT_ADDR) \ + PACA_INIT_COMMON(number, 1, 0, (u64)&initial_stab) \ PACA_INIT_ISERIES(number) \ } @@ -90,7 +91,7 @@ extern unsigned long __toc_start; #define BOOTCPU_PACA_INIT(number) \ { \ - PACA_INIT_COMMON(number, 1, STAB0_PHYS_ADDR, STAB0_VIRT_ADDR) \ + PACA_INIT_COMMON(number, 1, STAB0_PHYS_ADDR, (u64)&initial_stab) \ } #endif diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c index d0d55c7908ef..861138ad092c 100644 --- a/arch/ppc64/kernel/pci.c +++ b/arch/ppc64/kernel/pci.c @@ -21,6 +21,7 @@ #include <linux/bootmem.h> #include <linux/mm.h> #include <linux/list.h> +#include <linux/syscalls.h> #include <asm/processor.h> #include <asm/io.h> @@ -50,6 +51,10 @@ unsigned long io_page_mask; EXPORT_SYMBOL(io_page_mask); +#ifdef CONFIG_PPC_MULTIPLATFORM +static void fixup_resource(struct resource *res, struct pci_dev *dev); +static void do_bus_setup(struct pci_bus *bus); +#endif unsigned int pcibios_assign_all_busses(void) { @@ -84,7 +89,6 @@ static void fixup_broken_pcnet32(struct pci_dev* dev) if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { dev->vendor = PCI_VENDOR_ID_AMD; pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD); - pci_name_device(dev); } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32); @@ -225,10 +229,287 @@ static void __init pcibios_claim_of_setup(void) } #endif +#ifdef CONFIG_PPC_MULTIPLATFORM +static u32 get_int_prop(struct device_node *np, const char *name, u32 def) +{ + u32 *prop; + int len; + + prop = (u32 *) get_property(np, name, &len); + if (prop && len >= 4) + return *prop; + return def; +} + +static unsigned int pci_parse_of_flags(u32 addr0) +{ + unsigned int flags = 0; + + if (addr0 & 0x02000000) { + flags |= IORESOURCE_MEM; + if (addr0 & 0x40000000) + flags |= IORESOURCE_PREFETCH; + } else if (addr0 & 0x01000000) + flags |= IORESOURCE_IO; + return flags; +} + +#define GET_64BIT(prop, i) ((((u64) (prop)[(i)]) << 32) | (prop)[(i)+1]) + +static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) +{ + u64 base, size; + unsigned int flags; + struct resource *res; + u32 *addrs, i; + int proplen; + + addrs = (u32 *) get_property(node, "assigned-addresses", &proplen); + if (!addrs) + return; + for (; proplen >= 20; proplen -= 20, addrs += 5) { + flags = pci_parse_of_flags(addrs[0]); + if (!flags) + continue; + base = GET_64BIT(addrs, 1); + size = GET_64BIT(addrs, 3); + if (!size) + continue; + i = addrs[0] & 0xff; + if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { + res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; + } else if (i == dev->rom_base_reg) { + res = &dev->resource[PCI_ROM_RESOURCE]; + flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE; + } else { + printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); + continue; + } + res->start = base; + res->end = base + size - 1; + res->flags = flags; + res->name = pci_name(dev); + fixup_resource(res, dev); + } +} + +static struct pci_dev *of_create_pci_dev(struct device_node *node, + struct pci_bus *bus, int devfn) +{ + struct pci_dev *dev; + const char *type; + + dev = kmalloc(sizeof(struct pci_dev), GFP_KERNEL); + if (!dev) + return NULL; + type = get_property(node, "device_type", NULL); + if (type == NULL) + type = ""; + + memset(dev, 0, sizeof(struct pci_dev)); + dev->bus = bus; + dev->sysdata = node; + dev->dev.parent = bus->bridge; + dev->dev.bus = &pci_bus_type; + dev->devfn = devfn; + dev->multifunction = 0; /* maybe a lie? */ + + dev->vendor = get_int_prop(node, "vendor-id", 0xffff); + dev->device = get_int_prop(node, "device-id", 0xffff); + dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0); + dev->subsystem_device = get_int_prop(node, "subsystem-id", 0); + + dev->cfg_size = 256; /*pci_cfg_space_size(dev);*/ + + sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus), + dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); + dev->class = get_int_prop(node, "class-code", 0); + + dev->current_state = 4; /* unknown power state */ + + if (!strcmp(type, "pci")) { + /* a PCI-PCI bridge */ + dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; + dev->rom_base_reg = PCI_ROM_ADDRESS1; + } else if (!strcmp(type, "cardbus")) { + dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; + } else { + dev->hdr_type = PCI_HEADER_TYPE_NORMAL; + dev->rom_base_reg = PCI_ROM_ADDRESS; + dev->irq = NO_IRQ; + if (node->n_intrs > 0) { + dev->irq = node->intrs[0].line; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + dev->irq); + } + } + + pci_parse_of_addrs(node, dev); + + pci_device_add(dev, bus); + + /* XXX pci_scan_msi_device(dev); */ + + return dev; +} + +static void of_scan_pci_bridge(struct device_node *node, struct pci_dev *dev); + +static void __devinit of_scan_bus(struct device_node *node, + struct pci_bus *bus) +{ + struct device_node *child = NULL; + u32 *reg; + int reglen, devfn; + struct pci_dev *dev; + + while ((child = of_get_next_child(node, child)) != NULL) { + reg = (u32 *) get_property(child, "reg", ®len); + if (reg == NULL || reglen < 20) + continue; + devfn = (reg[0] >> 8) & 0xff; + /* create a new pci_dev for this device */ + dev = of_create_pci_dev(child, bus, devfn); + if (!dev) + continue; + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || + dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) + of_scan_pci_bridge(child, dev); + } + + do_bus_setup(bus); +} + +static void __devinit of_scan_pci_bridge(struct device_node *node, + struct pci_dev *dev) +{ + struct pci_bus *bus; + u32 *busrange, *ranges; + int len, i, mode; + struct resource *res; + unsigned int flags; + u64 size; + + /* parse bus-range property */ + busrange = (u32 *) get_property(node, "bus-range", &len); + if (busrange == NULL || len != 8) { + printk(KERN_ERR "Can't get bus-range for PCI-PCI bridge %s\n", + node->full_name); + return; + } + ranges = (u32 *) get_property(node, "ranges", &len); + if (ranges == NULL) { + printk(KERN_ERR "Can't get ranges for PCI-PCI bridge %s\n", + node->full_name); + return; + } + + bus = pci_add_new_bus(dev->bus, dev, busrange[0]); + if (!bus) { + printk(KERN_ERR "Failed to create pci bus for %s\n", + node->full_name); + return; + } + + bus->primary = dev->bus->number; + bus->subordinate = busrange[1]; + bus->bridge_ctl = 0; + bus->sysdata = node; + + /* parse ranges property */ + /* PCI #address-cells == 3 and #size-cells == 2 always */ + res = &dev->resource[PCI_BRIDGE_RESOURCES]; + for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) { + res->flags = 0; + bus->resource[i] = res; + ++res; + } + i = 1; + for (; len >= 32; len -= 32, ranges += 8) { + flags = pci_parse_of_flags(ranges[0]); + size = GET_64BIT(ranges, 6); + if (flags == 0 || size == 0) + continue; + if (flags & IORESOURCE_IO) { + res = bus->resource[0]; + if (res->flags) { + printk(KERN_ERR "PCI: ignoring extra I/O range" + " for bridge %s\n", node->full_name); + continue; + } + } else { + if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { + printk(KERN_ERR "PCI: too many memory ranges" + " for bridge %s\n", node->full_name); + continue; + } + res = bus->resource[i]; + ++i; + } + res->start = GET_64BIT(ranges, 1); + res->end = res->start + size - 1; + res->flags = flags; + fixup_resource(res, dev); + } + sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), + bus->number); + + mode = PCI_PROBE_NORMAL; + if (ppc_md.pci_probe_mode) + mode = ppc_md.pci_probe_mode(bus); + if (mode == PCI_PROBE_DEVTREE) + of_scan_bus(node, bus); + else if (mode == PCI_PROBE_NORMAL) + pci_scan_child_bus(bus); +} +#endif /* CONFIG_PPC_MULTIPLATFORM */ + +static void __devinit scan_phb(struct pci_controller *hose) +{ + struct pci_bus *bus; + struct device_node *node = hose->arch_data; + int i, mode; + struct resource *res; + + bus = pci_create_bus(NULL, hose->first_busno, hose->ops, node); + if (bus == NULL) { + printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", + hose->global_number); + return; + } + bus->secondary = hose->first_busno; + hose->bus = bus; + + bus->resource[0] = res = &hose->io_resource; + if (res->flags && request_resource(&ioport_resource, res)) + printk(KERN_ERR "Failed to request PCI IO region " + "on PCI domain %04x\n", hose->global_number); + + for (i = 0; i < 3; ++i) { + res = &hose->mem_resources[i]; + bus->resource[i+1] = res; + if (res->flags && request_resource(&iomem_resource, res)) + printk(KERN_ERR "Failed to request PCI memory region " + "on PCI domain %04x\n", hose->global_number); + } + + mode = PCI_PROBE_NORMAL; +#ifdef CONFIG_PPC_MULTIPLATFORM + if (ppc_md.pci_probe_mode) + mode = ppc_md.pci_probe_mode(bus); + if (mode == PCI_PROBE_DEVTREE) { + bus->subordinate = hose->last_busno; + of_scan_bus(node, bus); + } +#endif /* CONFIG_PPC_MULTIPLATFORM */ + if (mode == PCI_PROBE_NORMAL) + hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); + pci_bus_add_devices(bus); +} + static int __init pcibios_init(void) { struct pci_controller *hose, *tmp; - struct pci_bus *bus; /* For now, override phys_mem_access_prot. If we need it, * later, we may move that initialization to each ppc_md @@ -242,13 +523,8 @@ static int __init pcibios_init(void) printk("PCI: Probing PCI hardware\n"); /* Scan all of the recorded PCI controllers. */ - list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { - hose->last_busno = 0xff; - bus = pci_scan_bus(hose->first_busno, hose->ops, - hose->arch_data); - hose->bus = bus; - hose->last_busno = bus->subordinate; - } + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) + scan_phb(hose); #ifndef CONFIG_PPC_ISERIES if (pci_probe_only) @@ -820,118 +1096,89 @@ void phbs_remap_io(void) /* * ppc64 can have multifunction devices that do not respond to function 0. * In this case we must scan all functions. + * XXX this can go now, we use the OF device tree in all the + * cases that caused problems. -- paulus */ int pcibios_scan_all_fns(struct pci_bus *bus, int devfn) { - struct device_node *busdn, *dn; + return 0; +} + +static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned long start, end, mask, offset; - if (bus->self) - busdn = pci_device_to_OF_node(bus->self); - else - busdn = bus->sysdata; /* must be a phb */ + if (res->flags & IORESOURCE_IO) { + offset = (unsigned long)hose->io_base_virt - pci_io_base; - if (busdn == NULL) - return 0; + start = res->start += offset; + end = res->end += offset; - /* - * Check to see if there is any of the 8 functions are in the - * device tree. If they are then we need to scan all the - * functions of this slot. - */ - for (dn = busdn->child; dn; dn = dn->sibling) - if ((dn->devfn >> 3) == (devfn >> 3)) - return 1; + /* Need to allow IO access to pages that are in the + ISA range */ + if (start < MAX_ISA_PORT) { + if (end > MAX_ISA_PORT) + end = MAX_ISA_PORT; - return 0; -} + start >>= PAGE_SHIFT; + end >>= PAGE_SHIFT; + /* get the range of pages for the map */ + mask = ((1 << (end+1)) - 1) ^ ((1 << start) - 1); + io_page_mask |= mask; + } + } else if (res->flags & IORESOURCE_MEM) { + res->start += hose->pci_mem_offset; + res->end += hose->pci_mem_offset; + } +} void __devinit pcibios_fixup_device_resources(struct pci_dev *dev, - struct pci_bus *bus) + struct pci_bus *bus) { /* Update device resources. */ - struct pci_controller *hose = pci_bus_to_host(bus); int i; - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - if (dev->resource[i].flags & IORESOURCE_IO) { - unsigned long offset = (unsigned long)hose->io_base_virt - - pci_io_base; - unsigned long start, end, mask; - - start = dev->resource[i].start += offset; - end = dev->resource[i].end += offset; - - /* Need to allow IO access to pages that are in the - ISA range */ - if (start < MAX_ISA_PORT) { - if (end > MAX_ISA_PORT) - end = MAX_ISA_PORT; - - start >>= PAGE_SHIFT; - end >>= PAGE_SHIFT; - - /* get the range of pages for the map */ - mask = ((1 << (end+1))-1) ^ ((1 << start)-1); - io_page_mask |= mask; - } - } - else if (dev->resource[i].flags & IORESOURCE_MEM) { - dev->resource[i].start += hose->pci_mem_offset; - dev->resource[i].end += hose->pci_mem_offset; - } - } + for (i = 0; i < PCI_NUM_RESOURCES; i++) + if (dev->resource[i].flags) + fixup_resource(&dev->resource[i], dev); } EXPORT_SYMBOL(pcibios_fixup_device_resources); -void __devinit pcibios_fixup_bus(struct pci_bus *bus) +static void __devinit do_bus_setup(struct pci_bus *bus) { - struct pci_controller *hose = pci_bus_to_host(bus); - struct pci_dev *dev = bus->self; - struct resource *res; - int i; + struct pci_dev *dev; - if (!dev) { - /* Root bus. */ + ppc_md.iommu_bus_setup(bus); - hose->bus = bus; - bus->resource[0] = res = &hose->io_resource; + list_for_each_entry(dev, &bus->devices, bus_list) + ppc_md.iommu_dev_setup(dev); - if (res->flags && request_resource(&ioport_resource, res)) - printk(KERN_ERR "Failed to request IO on " - "PCI domain %d\n", pci_domain_nr(bus)); + if (ppc_md.irq_bus_setup) + ppc_md.irq_bus_setup(bus); +} - for (i = 0; i < 3; ++i) { - res = &hose->mem_resources[i]; - bus->resource[i+1] = res; - if (res->flags && request_resource(&iomem_resource, res)) - printk(KERN_ERR "Failed to request MEM on " - "PCI domain %d\n", - pci_domain_nr(bus)); - } - } else if (pci_probe_only && - (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { +void __devinit pcibios_fixup_bus(struct pci_bus *bus) +{ + struct pci_dev *dev = bus->self; + + if (dev && pci_probe_only && + (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { /* This is a subordinate bridge */ pci_read_bridge_bases(bus); pcibios_fixup_device_resources(dev, bus); } - ppc_md.iommu_bus_setup(bus); - - list_for_each_entry(dev, &bus->devices, bus_list) - ppc_md.iommu_dev_setup(dev); - - if (ppc_md.irq_bus_setup) - ppc_md.irq_bus_setup(bus); + do_bus_setup(bus); if (!pci_probe_only) return; - list_for_each_entry(dev, &bus->devices, bus_list) { + list_for_each_entry(dev, &bus->devices, bus_list) if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) pcibios_fixup_device_resources(dev, bus); - } } EXPORT_SYMBOL(pcibios_fixup_bus); @@ -983,3 +1230,62 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar, } #endif /* CONFIG_PPC_MULTIPLATFORM */ + + +#define IOBASE_BRIDGE_NUMBER 0 +#define IOBASE_MEMORY 1 +#define IOBASE_IO 2 +#define IOBASE_ISA_IO 3 +#define IOBASE_ISA_MEM 4 + +long sys_pciconfig_iobase(long which, unsigned long in_bus, + unsigned long in_devfn) +{ + struct pci_controller* hose; + struct list_head *ln; + struct pci_bus *bus = NULL; + struct device_node *hose_node; + + /* Argh ! Please forgive me for that hack, but that's the + * simplest way to get existing XFree to not lockup on some + * G5 machines... So when something asks for bus 0 io base + * (bus 0 is HT root), we return the AGP one instead. + */ +#ifdef CONFIG_PPC_PMAC + if (systemcfg->platform == PLATFORM_POWERMAC && + machine_is_compatible("MacRISC4")) + if (in_bus == 0) + in_bus = 0xf0; +#endif /* CONFIG_PPC_PMAC */ + + /* That syscall isn't quite compatible with PCI domains, but it's + * used on pre-domains setup. We return the first match + */ + + for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) { + bus = pci_bus_b(ln); + if (in_bus >= bus->number && in_bus < (bus->number + bus->subordinate)) + break; + bus = NULL; + } + if (bus == NULL || bus->sysdata == NULL) + return -ENODEV; + + hose_node = (struct device_node *)bus->sysdata; + hose = PCI_DN(hose_node)->phb; + + switch (which) { + case IOBASE_BRIDGE_NUMBER: + return (long)hose->first_busno; + case IOBASE_MEMORY: + return (long)hose->pci_mem_offset; + case IOBASE_IO: + return (long)hose->io_base_phys; + case IOBASE_ISA_IO: + return (long)isa_io_base; + case IOBASE_ISA_MEM: + return -EINVAL; + } + + return -EOPNOTSUPP; +} diff --git a/arch/ppc64/kernel/pci.h b/arch/ppc64/kernel/pci.h index 26be78b13af1..5eb2cc320566 100644 --- a/arch/ppc64/kernel/pci.h +++ b/arch/ppc64/kernel/pci.h @@ -34,7 +34,6 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre, void pci_devs_phb_init(void); void pci_devs_phb_init_dynamic(struct pci_controller *phb); -struct device_node *fetch_dev_dn(struct pci_dev *dev); /* PCI address cache management routines */ void pci_addr_cache_insert_device(struct pci_dev *dev); diff --git a/arch/ppc64/kernel/pci_dn.c b/arch/ppc64/kernel/pci_dn.c index ec345462afc3..a86389d07d57 100644 --- a/arch/ppc64/kernel/pci_dn.c +++ b/arch/ppc64/kernel/pci_dn.c @@ -23,6 +23,8 @@ #include <linux/pci.h> #include <linux/string.h> #include <linux/init.h> +#include <linux/slab.h> +#include <linux/bootmem.h> #include <asm/io.h> #include <asm/prom.h> @@ -40,16 +42,26 @@ static void * __devinit update_dn_pci_info(struct device_node *dn, void *data) struct pci_controller *phb = data; int *type = (int *)get_property(dn, "ibm,pci-config-space-type", NULL); u32 *regs; - - dn->phb = phb; + struct pci_dn *pdn; + + if (phb->is_dynamic) + pdn = kmalloc(sizeof(*pdn), GFP_KERNEL); + else + pdn = alloc_bootmem(sizeof(*pdn)); + if (pdn == NULL) + return NULL; + memset(pdn, 0, sizeof(*pdn)); + dn->data = pdn; + pdn->node = dn; + pdn->phb = phb; regs = (u32 *)get_property(dn, "reg", NULL); if (regs) { /* First register entry is addr (00BBSS00) */ - dn->busno = (regs[0] >> 16) & 0xff; - dn->devfn = (regs[0] >> 8) & 0xff; + pdn->busno = (regs[0] >> 16) & 0xff; + pdn->devfn = (regs[0] >> 8) & 0xff; } - dn->pci_ext_config_space = (type && *type == 1); + pdn->pci_ext_config_space = (type && *type == 1); return NULL; } @@ -112,10 +124,15 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre, void __devinit pci_devs_phb_init_dynamic(struct pci_controller *phb) { struct device_node * dn = (struct device_node *) phb->arch_data; + struct pci_dn *pdn; /* PHB nodes themselves must not match */ - dn->devfn = dn->busno = -1; - dn->phb = phb; + update_dn_pci_info(dn, phb); + pdn = dn->data; + if (pdn) { + pdn->devfn = pdn->busno = -1; + pdn->phb = phb; + } /* Update dn->phb ptrs for new phb and children devices */ traverse_pci_devices(dn, update_dn_pci_info, phb); @@ -123,14 +140,17 @@ void __devinit pci_devs_phb_init_dynamic(struct pci_controller *phb) /* * Traversal func that looks for a <busno,devfcn> value. - * If found, the device_node is returned (thus terminating the traversal). + * If found, the pci_dn is returned (thus terminating the traversal). */ static void *is_devfn_node(struct device_node *dn, void *data) { int busno = ((unsigned long)data >> 8) & 0xff; int devfn = ((unsigned long)data) & 0xff; + struct pci_dn *pci = dn->data; - return ((devfn == dn->devfn) && (busno == dn->busno)) ? dn : NULL; + if (pci && (devfn == pci->devfn) && (busno == pci->busno)) + return dn; + return NULL; } /* @@ -149,13 +169,10 @@ static void *is_devfn_node(struct device_node *dn, void *data) struct device_node *fetch_dev_dn(struct pci_dev *dev) { struct device_node *orig_dn = dev->sysdata; - struct pci_controller *phb = orig_dn->phb; /* assume same phb as orig_dn */ - struct device_node *phb_dn; struct device_node *dn; unsigned long searchval = (dev->bus->number << 8) | dev->devfn; - phb_dn = phb->arch_data; - dn = traverse_pci_devices(phb_dn, is_devfn_node, (void *)searchval); + dn = traverse_pci_devices(orig_dn, is_devfn_node, (void *)searchval); if (dn) dev->sysdata = dn; return dn; @@ -165,11 +182,13 @@ EXPORT_SYMBOL(fetch_dev_dn); static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) { struct device_node *np = node; + struct pci_dn *pci; int err = NOTIFY_OK; switch (action) { case PSERIES_RECONFIG_ADD: - update_dn_pci_info(np, np->parent->phb); + pci = np->parent->data; + update_dn_pci_info(np, pci->phb); break; default: err = NOTIFY_DONE; diff --git a/arch/ppc64/kernel/pci_iommu.c b/arch/ppc64/kernel/pci_iommu.c index ef0a62b916be..14647e09c9cd 100644 --- a/arch/ppc64/kernel/pci_iommu.c +++ b/arch/ppc64/kernel/pci_iommu.c @@ -66,7 +66,7 @@ static inline struct iommu_table *devnode_table(struct device *dev) #endif /* CONFIG_PPC_ISERIES */ #ifdef CONFIG_PPC_MULTIPLATFORM - return PCI_GET_DN(pdev)->iommu_table; + return PCI_DN(PCI_GET_DN(pdev))->iommu_table; #endif /* CONFIG_PPC_MULTIPLATFORM */ } diff --git a/arch/ppc64/kernel/pmac_feature.c b/arch/ppc64/kernel/pmac_feature.c index 98ed2bccab1a..eb4e6c3f694d 100644 --- a/arch/ppc64/kernel/pmac_feature.c +++ b/arch/ppc64/kernel/pmac_feature.c @@ -674,6 +674,7 @@ void __init pmac_check_ht_link(void) #if 0 /* Disabled for now */ u32 ufreq, freq, ucfg, cfg; struct device_node *pcix_node; + struct pci_dn *pdn; u8 px_bus, px_devfn; struct pci_controller *px_hose; @@ -687,9 +688,10 @@ void __init pmac_check_ht_link(void) printk("No PCI-X bridge found\n"); return; } - px_hose = pcix_node->phb; - px_bus = pcix_node->busno; - px_devfn = pcix_node->devfn; + pdn = pcix_node->data; + px_hose = pdn->phb; + px_bus = pdn->busno; + px_devfn = pdn->devfn; early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg); early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq); diff --git a/arch/ppc64/kernel/pmac_pci.c b/arch/ppc64/kernel/pmac_pci.c index 71fe911ad183..dc40a0cad0b4 100644 --- a/arch/ppc64/kernel/pmac_pci.c +++ b/arch/ppc64/kernel/pmac_pci.c @@ -242,7 +242,7 @@ static int u3_ht_skip_device(struct pci_controller *hose, else busdn = hose->arch_data; for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->devfn == devfn) + if (dn->data && PCI_DN(dn)->devfn == devfn) break; if (dn == NULL) return -1; @@ -388,7 +388,7 @@ static void __init setup_u3_agp(struct pci_controller* hose) * the reg address cell, we shall fix that by killing struct * reg_property and using some accessor functions instead */ - hose->first_busno = 0xf0; + hose->first_busno = 0xf0; hose->last_busno = 0xff; has_uninorth = 1; hose->ops = ¯isc_pci_ops; @@ -473,7 +473,7 @@ static void __init setup_u3_ht(struct pci_controller* hose) continue; } cur++; - DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n", + DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n", cur-1, res->start - 1, cur, res->end + 1); hose->mem_resources[cur].name = np->full_name; hose->mem_resources[cur].flags = IORESOURCE_MEM; @@ -603,24 +603,24 @@ static int __init add_bridge(struct device_node *dev) char* disp_name; int *bus_range; int primary = 1; - struct property *of_prop; + struct property *of_prop; DBG("Adding PCI host bridge %s\n", dev->full_name); - bus_range = (int *) get_property(dev, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", - dev->full_name); - } + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", + dev->full_name); + } hose = alloc_bootmem(sizeof(struct pci_controller)); if (hose == NULL) return -ENOMEM; - pci_setup_pci_controller(hose); + pci_setup_pci_controller(hose); - hose->arch_data = dev; - hose->first_busno = bus_range ? bus_range[0] : 0; - hose->last_busno = bus_range ? bus_range[1] : 0xff; + hose->arch_data = dev; + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; of_prop = alloc_bootmem(sizeof(struct property) + sizeof(hose->global_number)); @@ -634,24 +634,24 @@ static int __init add_bridge(struct device_node *dev) } disp_name = NULL; - if (device_is_compatible(dev, "u3-agp")) { - setup_u3_agp(hose); - disp_name = "U3-AGP"; - primary = 0; - } else if (device_is_compatible(dev, "u3-ht")) { - setup_u3_ht(hose); - disp_name = "U3-HT"; - primary = 1; - } - printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", - disp_name, hose->first_busno, hose->last_busno); - - /* Interpret the "ranges" property */ - /* This also maps the I/O region and sets isa_io/mem_base */ - pmac_process_bridge_OF_ranges(hose, dev, primary); - - /* Fixup "bus-range" OF property */ - fixup_bus_range(dev); + if (device_is_compatible(dev, "u3-agp")) { + setup_u3_agp(hose); + disp_name = "U3-AGP"; + primary = 0; + } else if (device_is_compatible(dev, "u3-ht")) { + setup_u3_ht(hose); + disp_name = "U3-HT"; + primary = 1; + } + printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", + disp_name, hose->first_busno, hose->last_busno); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pmac_process_bridge_OF_ranges(hose, dev, primary); + + /* Fixup "bus-range" OF property */ + fixup_bus_range(dev); return 0; } @@ -746,9 +746,9 @@ void __init pmac_pci_init(void) */ if (u3_agp) { struct device_node *np = u3_agp->arch_data; - np->busno = 0xf0; + PCI_DN(np)->busno = 0xf0; for (np = np->child; np; np = np->sibling) - np->busno = 0xf0; + PCI_DN(np)->busno = 0xf0; } pmac_check_ht_link(); diff --git a/arch/ppc64/kernel/pmac_setup.c b/arch/ppc64/kernel/pmac_setup.c index e40877fa67cd..325426c7bed0 100644 --- a/arch/ppc64/kernel/pmac_setup.c +++ b/arch/ppc64/kernel/pmac_setup.c @@ -71,6 +71,7 @@ #include <asm/of_device.h> #include <asm/lmb.h> #include <asm/smu.h> +#include <asm/pmc.h> #include "pmac.h" #include "mpic.h" @@ -273,16 +274,6 @@ static void __pmac pmac_halt(void) } #ifdef CONFIG_BOOTX_TEXT -static int dummy_getc_poll(void) -{ - return -1; -} - -static unsigned char dummy_getc(void) -{ - return 0; -} - static void btext_putc(unsigned char c) { btext_drawchar(c); @@ -341,16 +332,13 @@ static void __init pmac_init_early(void) sccdbg = 1; udbg_init_scc(NULL); } - - else { #ifdef CONFIG_BOOTX_TEXT + else { init_boot_display(); - ppc_md.udbg_putc = btext_putc; - ppc_md.udbg_getc = dummy_getc; - ppc_md.udbg_getc_poll = dummy_getc_poll; -#endif /* CONFIG_BOOTX_TEXT */ + udbg_putc = btext_putc; } +#endif /* CONFIG_BOOTX_TEXT */ /* Setup interrupt mapping options */ ppc64_interrupt_controller = IC_OPEN_PIC; @@ -489,6 +477,18 @@ static int __init pmac_probe(int platform) return 1; } +static int pmac_probe_mode(struct pci_bus *bus) +{ + struct device_node *node = bus->sysdata; + + /* We need to use normal PCI probing for the AGP bus, + since the device for the AGP bridge isn't in the tree. */ + if (bus->self == NULL && device_is_compatible(node, "u3-agp")) + return PCI_PROBE_NORMAL; + + return PCI_PROBE_DEVTREE; +} + struct machdep_calls __initdata pmac_md = { #ifdef CONFIG_HOTPLUG_CPU .cpu_die = generic_mach_cpu_die, @@ -500,6 +500,7 @@ struct machdep_calls __initdata pmac_md = { .init_IRQ = pmac_init_IRQ, .get_irq = mpic_get_irq, .pcibios_fixup = pmac_pcibios_fixup, + .pci_probe_mode = pmac_probe_mode, .restart = pmac_restart, .power_off = pmac_power_off, .halt = pmac_halt, @@ -511,4 +512,5 @@ struct machdep_calls __initdata pmac_md = { .progress = pmac_progress, .check_legacy_ioport = pmac_check_legacy_ioport, .idle_loop = native_idle, + .enable_pmcs = power4_enable_pmcs, }; diff --git a/arch/ppc64/kernel/pmc.c b/arch/ppc64/kernel/pmc.c index 67be773f9c00..63d9481c3ec2 100644 --- a/arch/ppc64/kernel/pmc.c +++ b/arch/ppc64/kernel/pmc.c @@ -26,7 +26,7 @@ static void dummy_perf(struct pt_regs *regs) mtspr(SPRN_MMCR0, mmcr0); } -static spinlock_t pmc_owner_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(pmc_owner_lock); static void *pmc_owner_caller; /* mostly for debugging */ perf_irq_t perf_irq = dummy_perf; @@ -65,3 +65,24 @@ void release_pmc_hardware(void) spin_unlock(&pmc_owner_lock); } EXPORT_SYMBOL_GPL(release_pmc_hardware); + +void power4_enable_pmcs(void) +{ + unsigned long hid0; + + hid0 = mfspr(HID0); + hid0 |= 1UL << (63 - 20); + + /* POWER4 requires the following sequence */ + asm volatile( + "sync\n" + "mtspr %1, %0\n" + "mfspr %0, %1\n" + "mfspr %0, %1\n" + "mfspr %0, %1\n" + "mfspr %0, %1\n" + "mfspr %0, %1\n" + "mfspr %0, %1\n" + "isync" : "=&r" (hid0) : "i" (HID0), "0" (hid0): + "memory"); +} diff --git a/arch/ppc64/kernel/process.c b/arch/ppc64/kernel/process.c index f7cae05e40fb..887005358eb1 100644 --- a/arch/ppc64/kernel/process.c +++ b/arch/ppc64/kernel/process.c @@ -50,9 +50,11 @@ #include <asm/machdep.h> #include <asm/iSeries/HvCallHpt.h> #include <asm/cputable.h> +#include <asm/firmware.h> #include <asm/sections.h> #include <asm/tlbflush.h> #include <asm/time.h> +#include <asm/plpar_wrappers.h> #ifndef CONFIG_SMP struct task_struct *last_task_used_math = NULL; @@ -162,7 +164,30 @@ int dump_task_altivec(struct pt_regs *regs, elf_vrregset_t *vrregs) #endif /* CONFIG_ALTIVEC */ +static void set_dabr_spr(unsigned long val) +{ + mtspr(SPRN_DABR, val); +} + +int set_dabr(unsigned long dabr) +{ + int ret = 0; + + if (firmware_has_feature(FW_FEATURE_XDABR)) { + /* We want to catch accesses from kernel and userspace */ + unsigned long flags = H_DABRX_KERNEL|H_DABRX_USER; + ret = plpar_set_xdabr(dabr, flags); + } else if (firmware_has_feature(FW_FEATURE_DABR)) { + ret = plpar_set_dabr(dabr); + } else { + set_dabr_spr(dabr); + } + + return ret; +} + DEFINE_PER_CPU(struct cpu_usage, cpu_usage_array); +static DEFINE_PER_CPU(unsigned long, current_dabr); struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *new) @@ -197,16 +222,20 @@ struct task_struct *__switch_to(struct task_struct *prev, new->thread.regs->msr |= MSR_VEC; #endif /* CONFIG_ALTIVEC */ + if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) { + set_dabr(new->thread.dabr); + __get_cpu_var(current_dabr) = new->thread.dabr; + } + flush_tlb_pending(); new_thread = &new->thread; old_thread = ¤t->thread; -/* Collect purr utilization data per process and per processor wise */ -/* purr is nothing but processor time base */ - -#if defined(CONFIG_PPC_PSERIES) - if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) { + /* Collect purr utilization data per process and per processor + * wise purr is nothing but processor time base + */ + if (firmware_has_feature(FW_FEATURE_SPLPAR)) { struct cpu_usage *cu = &__get_cpu_var(cpu_usage_array); long unsigned start_tb, current_tb; start_tb = old_thread->start_tb; @@ -214,8 +243,6 @@ struct task_struct *__switch_to(struct task_struct *prev, old_thread->accum_tb += (current_tb - start_tb); new_thread->start_tb = current_tb; } -#endif - local_irq_save(flags); last = _switch(old_thread, new_thread); @@ -336,6 +363,11 @@ void flush_thread(void) last_task_used_altivec = NULL; #endif /* CONFIG_ALTIVEC */ #endif /* CONFIG_SMP */ + + if (current->thread.dabr) { + current->thread.dabr = 0; + set_dabr(0); + } } void diff --git a/arch/ppc64/kernel/prom.c b/arch/ppc64/kernel/prom.c index 5aca01ddd81f..7035deb6de92 100644 --- a/arch/ppc64/kernel/prom.c +++ b/arch/ppc64/kernel/prom.c @@ -22,7 +22,6 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/threads.h> #include <linux/spinlock.h> #include <linux/types.h> @@ -625,8 +624,8 @@ void __init finish_device_tree(void) static inline char *find_flat_dt_string(u32 offset) { - return ((char *)initial_boot_params) + initial_boot_params->off_dt_strings - + offset; + return ((char *)initial_boot_params) + + initial_boot_params->off_dt_strings + offset; } /** @@ -635,26 +634,33 @@ static inline char *find_flat_dt_string(u32 offset) * unflatten the tree */ static int __init scan_flat_dt(int (*it)(unsigned long node, - const char *full_path, void *data), + const char *uname, int depth, + void *data), void *data) { unsigned long p = ((unsigned long)initial_boot_params) + initial_boot_params->off_dt_struct; int rc = 0; + int depth = -1; do { u32 tag = *((u32 *)p); char *pathp; p += 4; - if (tag == OF_DT_END_NODE) + if (tag == OF_DT_END_NODE) { + depth --; + continue; + } + if (tag == OF_DT_NOP) continue; if (tag == OF_DT_END) break; if (tag == OF_DT_PROP) { u32 sz = *((u32 *)p); p += 8; - p = _ALIGN(p, sz >= 8 ? 8 : 4); + if (initial_boot_params->version < 0x10) + p = _ALIGN(p, sz >= 8 ? 8 : 4); p += sz; p = _ALIGN(p, 4); continue; @@ -664,9 +670,18 @@ static int __init scan_flat_dt(int (*it)(unsigned long node, " device tree !\n", tag); return -EINVAL; } + depth++; pathp = (char *)p; p = _ALIGN(p + strlen(pathp) + 1, 4); - rc = it(p, pathp, data); + if ((*pathp) == '/') { + char *lp, *np; + for (lp = NULL, np = pathp; *np; np++) + if ((*np) == '/') + lp = np+1; + if (lp != NULL) + pathp = lp; + } + rc = it(p, pathp, depth, data); if (rc != 0) break; } while(1); @@ -689,17 +704,21 @@ static void* __init get_flat_dt_prop(unsigned long node, const char *name, const char *nstr; p += 4; + if (tag == OF_DT_NOP) + continue; if (tag != OF_DT_PROP) return NULL; sz = *((u32 *)p); noff = *((u32 *)(p + 4)); p += 8; - p = _ALIGN(p, sz >= 8 ? 8 : 4); + if (initial_boot_params->version < 0x10) + p = _ALIGN(p, sz >= 8 ? 8 : 4); nstr = find_flat_dt_string(noff); if (nstr == NULL) { - printk(KERN_WARNING "Can't find property index name !\n"); + printk(KERN_WARNING "Can't find property index" + " name !\n"); return NULL; } if (strcmp(name, nstr) == 0) { @@ -713,7 +732,7 @@ static void* __init get_flat_dt_prop(unsigned long node, const char *name, } static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size, - unsigned long align) + unsigned long align) { void *res; @@ -727,13 +746,16 @@ static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size, static unsigned long __init unflatten_dt_node(unsigned long mem, unsigned long *p, struct device_node *dad, - struct device_node ***allnextpp) + struct device_node ***allnextpp, + unsigned long fpsize) { struct device_node *np; struct property *pp, **prev_pp = NULL; char *pathp; u32 tag; - unsigned int l; + unsigned int l, allocl; + int has_name = 0; + int new_format = 0; tag = *((u32 *)(*p)); if (tag != OF_DT_BEGIN_NODE) { @@ -742,21 +764,62 @@ static unsigned long __init unflatten_dt_node(unsigned long mem, } *p += 4; pathp = (char *)*p; - l = strlen(pathp) + 1; + l = allocl = strlen(pathp) + 1; *p = _ALIGN(*p + l, 4); - np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + l, + /* version 0x10 has a more compact unit name here instead of the full + * path. we accumulate the full path size using "fpsize", we'll rebuild + * it later. We detect this because the first character of the name is + * not '/'. + */ + if ((*pathp) != '/') { + new_format = 1; + if (fpsize == 0) { + /* root node: special case. fpsize accounts for path + * plus terminating zero. root node only has '/', so + * fpsize should be 2, but we want to avoid the first + * level nodes to have two '/' so we use fpsize 1 here + */ + fpsize = 1; + allocl = 2; + } else { + /* account for '/' and path size minus terminal 0 + * already in 'l' + */ + fpsize += l; + allocl = fpsize; + } + } + + + np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl, __alignof__(struct device_node)); if (allnextpp) { memset(np, 0, sizeof(*np)); np->full_name = ((char*)np) + sizeof(struct device_node); - memcpy(np->full_name, pathp, l); + if (new_format) { + char *p = np->full_name; + /* rebuild full path for new format */ + if (dad && dad->parent) { + strcpy(p, dad->full_name); +#ifdef DEBUG + if ((strlen(p) + l + 1) != allocl) { + DBG("%s: p: %d, l: %d, a: %d\n", + pathp, strlen(p), l, allocl); + } +#endif + p += strlen(p); + } + *(p++) = '/'; + memcpy(p, pathp, l); + } else + memcpy(np->full_name, pathp, l); prev_pp = &np->properties; **allnextpp = np; *allnextpp = &np->allnext; if (dad != NULL) { np->parent = dad; - /* we temporarily use the `next' field as `last_child'. */ + /* we temporarily use the next field as `last_child'*/ if (dad->next == 0) dad->child = np; else @@ -770,18 +833,26 @@ static unsigned long __init unflatten_dt_node(unsigned long mem, char *pname; tag = *((u32 *)(*p)); + if (tag == OF_DT_NOP) { + *p += 4; + continue; + } if (tag != OF_DT_PROP) break; *p += 4; sz = *((u32 *)(*p)); noff = *((u32 *)((*p) + 4)); - *p = _ALIGN((*p) + 8, sz >= 8 ? 8 : 4); + *p += 8; + if (initial_boot_params->version < 0x10) + *p = _ALIGN(*p, sz >= 8 ? 8 : 4); pname = find_flat_dt_string(noff); if (pname == NULL) { printk("Can't find property name in list !\n"); break; } + if (strcmp(pname, "name") == 0) + has_name = 1; l = strlen(pname) + 1; pp = unflatten_dt_alloc(&mem, sizeof(struct property), __alignof__(struct property)); @@ -801,6 +872,36 @@ static unsigned long __init unflatten_dt_node(unsigned long mem, } *p = _ALIGN((*p) + sz, 4); } + /* with version 0x10 we may not have the name property, recreate + * it here from the unit name if absent + */ + if (!has_name) { + char *p = pathp, *ps = pathp, *pa = NULL; + int sz; + + while (*p) { + if ((*p) == '@') + pa = p; + if ((*p) == '/') + ps = p + 1; + p++; + } + if (pa < ps) + pa = p; + sz = (pa - ps) + 1; + pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz, + __alignof__(struct property)); + if (allnextpp) { + pp->name = "name"; + pp->length = sz; + pp->value = (unsigned char *)(pp + 1); + *prev_pp = pp; + prev_pp = &pp->next; + memcpy(pp->value, ps, sz - 1); + ((char *)pp->value)[sz - 1] = 0; + DBG("fixed up name for %s -> %s\n", pathp, pp->value); + } + } if (allnextpp) { *prev_pp = NULL; np->name = get_property(np, "name", NULL); @@ -812,11 +913,11 @@ static unsigned long __init unflatten_dt_node(unsigned long mem, np->type = "<NULL>"; } while (tag == OF_DT_BEGIN_NODE) { - mem = unflatten_dt_node(mem, p, np, allnextpp); + mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize); tag = *((u32 *)(*p)); } if (tag != OF_DT_END_NODE) { - printk("Weird tag at start of node: %x\n", tag); + printk("Weird tag at end of node: %x\n", tag); return mem; } *p += 4; @@ -842,21 +943,32 @@ void __init unflatten_device_tree(void) /* First pass, scan for size */ start = ((unsigned long)initial_boot_params) + initial_boot_params->off_dt_struct; - size = unflatten_dt_node(0, &start, NULL, NULL); + size = unflatten_dt_node(0, &start, NULL, NULL, 0); + size = (size | 3) + 1; DBG(" size is %lx, allocating...\n", size); /* Allocate memory for the expanded device tree */ - mem = (unsigned long)abs_to_virt(lmb_alloc(size, - __alignof__(struct device_node))); + mem = lmb_alloc(size + 4, __alignof__(struct device_node)); + if (!mem) { + DBG("Couldn't allocate memory with lmb_alloc()!\n"); + panic("Couldn't allocate memory with lmb_alloc()!\n"); + } + mem = (unsigned long)abs_to_virt(mem); + + ((u32 *)mem)[size / 4] = 0xdeadbeef; + DBG(" unflattening...\n", mem); /* Second pass, do actual unflattening */ start = ((unsigned long)initial_boot_params) + initial_boot_params->off_dt_struct; - unflatten_dt_node(mem, &start, NULL, &allnextp); + unflatten_dt_node(mem, &start, NULL, &allnextp, 0); if (*((u32 *)start) != OF_DT_END) - printk(KERN_WARNING "Weird tag at end of tree: %x\n", *((u32 *)start)); + printk(KERN_WARNING "Weird tag at end of tree: %08x\n", *((u32 *)start)); + if (((u32 *)mem)[size / 4] != 0xdeadbeef) + printk(KERN_WARNING "End of tree marker overwritten: %08x\n", + ((u32 *)mem)[size / 4] ); *allnextp = NULL; /* Get pointer to OF "/chosen" node for use everywhere */ @@ -880,7 +992,7 @@ void __init unflatten_device_tree(void) static int __init early_init_dt_scan_cpus(unsigned long node, - const char *full_path, void *data) + const char *uname, int depth, void *data) { char *type = get_flat_dt_prop(node, "device_type", NULL); u32 *prop; @@ -947,13 +1059,15 @@ static int __init early_init_dt_scan_cpus(unsigned long node, } static int __init early_init_dt_scan_chosen(unsigned long node, - const char *full_path, void *data) + const char *uname, int depth, void *data) { u32 *prop; u64 *prop64; extern unsigned long memory_limit, tce_alloc_start, tce_alloc_end; - if (strcmp(full_path, "/chosen") != 0) + DBG("search \"chosen\", depth: %d, uname: %s\n", depth, uname); + + if (depth != 1 || strcmp(uname, "chosen") != 0) return 0; /* get platform type */ @@ -1003,18 +1117,20 @@ static int __init early_init_dt_scan_chosen(unsigned long node, } static int __init early_init_dt_scan_root(unsigned long node, - const char *full_path, void *data) + const char *uname, int depth, void *data) { u32 *prop; - if (strcmp(full_path, "/") != 0) + if (depth != 0) return 0; prop = (u32 *)get_flat_dt_prop(node, "#size-cells", NULL); dt_root_size_cells = (prop == NULL) ? 1 : *prop; - + DBG("dt_root_size_cells = %x\n", dt_root_size_cells); + prop = (u32 *)get_flat_dt_prop(node, "#address-cells", NULL); dt_root_addr_cells = (prop == NULL) ? 2 : *prop; + DBG("dt_root_addr_cells = %x\n", dt_root_addr_cells); /* break now */ return 1; @@ -1042,7 +1158,7 @@ static unsigned long __init dt_mem_next_cell(int s, cell_t **cellp) static int __init early_init_dt_scan_memory(unsigned long node, - const char *full_path, void *data) + const char *uname, int depth, void *data) { char *type = get_flat_dt_prop(node, "device_type", NULL); cell_t *reg, *endp; @@ -1058,7 +1174,9 @@ static int __init early_init_dt_scan_memory(unsigned long node, endp = reg + (l / sizeof(cell_t)); - DBG("memory scan node %s ...\n", full_path); + DBG("memory scan node %s ..., reg size %ld, data: %x %x %x %x, ...\n", + uname, l, reg[0], reg[1], reg[2], reg[3]); + while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { unsigned long base, size; @@ -1469,10 +1587,11 @@ struct device_node *of_find_node_by_path(const char *path) struct device_node *np = allnodes; read_lock(&devtree_lock); - for (; np != 0; np = np->allnext) + for (; np != 0; np = np->allnext) { if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0 && of_node_get(np)) break; + } read_unlock(&devtree_lock); return np; } @@ -1614,6 +1733,7 @@ static void of_node_release(struct kref *kref) kfree(node->intrs); kfree(node->addrs); kfree(node->full_name); + kfree(node->data); kfree(node); } diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index dbbe6c79d8da..9979919cdf92 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -22,7 +22,6 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/threads.h> #include <linux/spinlock.h> #include <linux/types.h> @@ -892,7 +891,10 @@ static void __init prom_init_mem(void) if ( RELOC(of_platform) == PLATFORM_PSERIES_LPAR ) RELOC(alloc_top) = RELOC(rmo_top); else - RELOC(alloc_top) = RELOC(rmo_top) = min(0x40000000ul, RELOC(ram_top)); + /* Some RS64 machines have buggy firmware where claims up at 1GB + * fails. Cap at 768MB as a workaround. Still plenty of room. + */ + RELOC(alloc_top) = RELOC(rmo_top) = min(0x30000000ul, RELOC(ram_top)); prom_printf("memory layout at init:\n"); prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit)); @@ -1534,7 +1536,8 @@ static unsigned long __init dt_find_string(char *str) */ #define MAX_PROPERTY_NAME 64 -static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, +static void __init scan_dt_build_strings(phandle node, + unsigned long *mem_start, unsigned long *mem_end) { unsigned long offset = reloc_offset(); @@ -1547,16 +1550,21 @@ static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, /* get and store all property names */ prev_name = RELOC(""); for (;;) { - int rc; - /* 64 is max len of name including nul. */ namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1); - rc = call_prom("nextprop", 3, 1, node, prev_name, namep); - if (rc != 1) { + if (call_prom("nextprop", 3, 1, node, prev_name, namep) != 1) { /* No more nodes: unwind alloc */ *mem_start = (unsigned long)namep; break; } + + /* skip "name" */ + if (strcmp(namep, RELOC("name")) == 0) { + *mem_start = (unsigned long)namep; + prev_name = RELOC("name"); + continue; + } + /* get/create string entry */ soff = dt_find_string(namep); if (soff != 0) { *mem_start = (unsigned long)namep; @@ -1571,7 +1579,7 @@ static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, /* do all our children */ child = call_prom("child", 1, 1, node); - while (child != (phandle)0) { + while (child != 0) { scan_dt_build_strings(child, mem_start, mem_end); child = call_prom("peer", 1, 1, child); } @@ -1580,16 +1588,13 @@ static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start, static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, unsigned long *mem_end) { - int l, align; phandle child; - char *namep, *prev_name, *sstart, *p, *ep; + char *namep, *prev_name, *sstart, *p, *ep, *lp, *path; unsigned long soff; unsigned char *valp; unsigned long offset = reloc_offset(); - char pname[MAX_PROPERTY_NAME]; - char *path; - - path = RELOC(prom_scratch); + static char pname[MAX_PROPERTY_NAME]; + int l; dt_push_token(OF_DT_BEGIN_NODE, mem_start, mem_end); @@ -1599,23 +1604,33 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, namep, *mem_end - *mem_start); if (l >= 0) { /* Didn't fit? Get more room. */ - if (l+1 > *mem_end - *mem_start) { + if ((l+1) > (*mem_end - *mem_start)) { namep = make_room(mem_start, mem_end, l+1, 1); call_prom("package-to-path", 3, 1, node, namep, l); } namep[l] = '\0'; + /* Fixup an Apple bug where they have bogus \0 chars in the * middle of the path in some properties */ for (p = namep, ep = namep + l; p < ep; p++) if (*p == '\0') { memmove(p, p+1, ep - p); - ep--; l--; + ep--; l--; p--; } - *mem_start = _ALIGN(((unsigned long) namep) + strlen(namep) + 1, 4); + + /* now try to extract the unit name in that mess */ + for (p = namep, lp = NULL; *p; p++) + if (*p == '/') + lp = p + 1; + if (lp != NULL) + memmove(namep, lp, strlen(lp) + 1); + *mem_start = _ALIGN(((unsigned long) namep) + + strlen(namep) + 1, 4); } /* get it again for debugging */ + path = RELOC(prom_scratch); memset(path, 0, PROM_SCRATCH_SIZE); call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-1); @@ -1623,23 +1638,27 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, prev_name = RELOC(""); sstart = (char *)RELOC(dt_string_start); for (;;) { - int rc; - - rc = call_prom("nextprop", 3, 1, node, prev_name, pname); - if (rc != 1) + if (call_prom("nextprop", 3, 1, node, prev_name, + RELOC(pname)) != 1) break; + /* skip "name" */ + if (strcmp(RELOC(pname), RELOC("name")) == 0) { + prev_name = RELOC("name"); + continue; + } + /* find string offset */ - soff = dt_find_string(pname); + soff = dt_find_string(RELOC(pname)); if (soff == 0) { - prom_printf("WARNING: Can't find string index for <%s>, node %s\n", - pname, path); + prom_printf("WARNING: Can't find string index for" + " <%s>, node %s\n", RELOC(pname), path); break; } prev_name = sstart + soff; /* get length */ - l = call_prom("getproplen", 2, 1, node, pname); + l = call_prom("getproplen", 2, 1, node, RELOC(pname)); /* sanity checks */ if (l == PROM_ERROR) @@ -1648,7 +1667,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, prom_printf("WARNING: ignoring large property "); /* It seems OF doesn't null-terminate the path :-( */ prom_printf("[%s] ", path); - prom_printf("%s length 0x%x\n", pname, l); + prom_printf("%s length 0x%x\n", RELOC(pname), l); continue; } @@ -1658,17 +1677,16 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, dt_push_token(soff, mem_start, mem_end); /* push property content */ - align = (l >= 8) ? 8 : 4; - valp = make_room(mem_start, mem_end, l, align); - call_prom("getprop", 4, 1, node, pname, valp, l); + valp = make_room(mem_start, mem_end, l, 4); + call_prom("getprop", 4, 1, node, RELOC(pname), valp, l); *mem_start = _ALIGN(*mem_start, 4); } /* Add a "linux,phandle" property. */ soff = dt_find_string(RELOC("linux,phandle")); if (soff == 0) - prom_printf("WARNING: Can't find string index for <linux-phandle>" - " node %s\n", path); + prom_printf("WARNING: Can't find string index for" + " <linux-phandle> node %s\n", path); else { dt_push_token(OF_DT_PROP, mem_start, mem_end); dt_push_token(4, mem_start, mem_end); @@ -1679,7 +1697,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, /* do all our children */ child = call_prom("child", 1, 1, node); - while (child != (phandle)0) { + while (child != 0) { scan_dt_build_struct(child, mem_start, mem_end); child = call_prom("peer", 1, 1, child); } @@ -1718,7 +1736,8 @@ static void __init flatten_device_tree(void) /* Build header and make room for mem rsv map */ mem_start = _ALIGN(mem_start, 4); - hdr = make_room(&mem_start, &mem_end, sizeof(struct boot_param_header), 4); + hdr = make_room(&mem_start, &mem_end, + sizeof(struct boot_param_header), 4); RELOC(dt_header_start) = (unsigned long)hdr; rsvmap = make_room(&mem_start, &mem_end, sizeof(mem_reserve_map), 8); @@ -1731,11 +1750,11 @@ static void __init flatten_device_tree(void) namep = make_room(&mem_start, &mem_end, 16, 1); strcpy(namep, RELOC("linux,phandle")); mem_start = (unsigned long)namep + strlen(namep) + 1; - RELOC(dt_string_end) = mem_start; /* Build string array */ prom_printf("Building dt strings...\n"); scan_dt_build_strings(root, &mem_start, &mem_end); + RELOC(dt_string_end) = mem_start; /* Build structure */ mem_start = PAGE_ALIGN(mem_start); @@ -1750,9 +1769,11 @@ static void __init flatten_device_tree(void) hdr->totalsize = RELOC(dt_struct_end) - RELOC(dt_header_start); hdr->off_dt_struct = RELOC(dt_struct_start) - RELOC(dt_header_start); hdr->off_dt_strings = RELOC(dt_string_start) - RELOC(dt_header_start); + hdr->dt_strings_size = RELOC(dt_string_end) - RELOC(dt_string_start); hdr->off_mem_rsvmap = ((unsigned long)rsvmap) - RELOC(dt_header_start); hdr->version = OF_DT_VERSION; - hdr->last_comp_version = 1; + /* Version 16 is not backward compatible */ + hdr->last_comp_version = 0x10; /* Reserve the whole thing and copy the reserve map in, we * also bump mem_reserve_cnt to cause further reservations to @@ -1808,6 +1829,9 @@ static void __init fixup_device_tree(void) /* does it need fixup ? */ if (prom_getproplen(i2c, "interrupts") > 0) return; + + prom_printf("fixing up bogus interrupts for u3 i2c...\n"); + /* interrupt on this revision of u3 is number 0 and level */ interrupts[0] = 0; interrupts[1] = 1; diff --git a/arch/ppc64/kernel/ptrace.c b/arch/ppc64/kernel/ptrace.c index 2993f108d96d..85ed3188a91d 100644 --- a/arch/ppc64/kernel/ptrace.c +++ b/arch/ppc64/kernel/ptrace.c @@ -17,6 +17,7 @@ * this archive for more details. */ +#include <linux/config.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/mm.h> @@ -206,6 +207,19 @@ int sys_ptrace(long request, long pid, long addr, long data) break; } + case PTRACE_GET_DEBUGREG: { + ret = -EINVAL; + /* We only support one DABR and no IABRS at the moment */ + if (addr > 0) + break; + ret = put_user(child->thread.dabr, + (unsigned long __user *)data); + break; + } + + case PTRACE_SET_DEBUGREG: + ret = ptrace_set_debugreg(child, addr, data); + case PTRACE_DETACH: ret = ptrace_detach(child, data); break; @@ -274,6 +288,20 @@ int sys_ptrace(long request, long pid, long addr, long data) break; } +#ifdef CONFIG_ALTIVEC + case PTRACE_GETVRREGS: + /* Get the child altivec register state. */ + flush_altivec_to_thread(child); + ret = get_vrregs((unsigned long __user *)data, child); + break; + + case PTRACE_SETVRREGS: + /* Set the child altivec register state. */ + flush_altivec_to_thread(child); + ret = set_vrregs(child, (unsigned long __user *)data); + break; +#endif + default: ret = ptrace_request(child, request, addr, data); break; diff --git a/arch/ppc64/kernel/ptrace32.c b/arch/ppc64/kernel/ptrace32.c index 16436426c7e2..fb8c22d6084a 100644 --- a/arch/ppc64/kernel/ptrace32.c +++ b/arch/ppc64/kernel/ptrace32.c @@ -17,6 +17,7 @@ * this archive for more details. */ +#include <linux/config.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/mm.h> @@ -337,6 +338,19 @@ int sys32_ptrace(long request, long pid, unsigned long addr, unsigned long data) break; } + case PTRACE_GET_DEBUGREG: { + ret = -EINVAL; + /* We only support one DABR and no IABRS at the moment */ + if (addr > 0) + break; + ret = put_user(child->thread.dabr, (u32 __user *)data); + break; + } + + case PTRACE_SET_DEBUGREG: + ret = ptrace_set_debugreg(child, addr, data); + break; + case PTRACE_DETACH: ret = ptrace_detach(child, data); break; @@ -405,9 +419,23 @@ int sys32_ptrace(long request, long pid, unsigned long addr, unsigned long data) break; } - case PTRACE_GETEVENTMSG: - ret = put_user(child->ptrace_message, (unsigned int __user *) data); - break; + case PTRACE_GETEVENTMSG: + ret = put_user(child->ptrace_message, (unsigned int __user *) data); + break; + +#ifdef CONFIG_ALTIVEC + case PTRACE_GETVRREGS: + /* Get the child altivec register state. */ + flush_altivec_to_thread(child); + ret = get_vrregs((unsigned long __user *)data, child); + break; + + case PTRACE_SETVRREGS: + /* Set the child altivec register state. */ + flush_altivec_to_thread(child); + ret = set_vrregs(child, (unsigned long __user *)data); + break; +#endif default: ret = ptrace_request(child, request, addr, data); diff --git a/arch/ppc64/kernel/ras.c b/arch/ppc64/kernel/ras.c index 3c00f7bfc1b5..41b97dc9cc0a 100644 --- a/arch/ppc64/kernel/ras.c +++ b/arch/ppc64/kernel/ras.c @@ -59,8 +59,6 @@ char mce_data_buf[RTAS_ERROR_LOG_MAX] /* This is true if we are using the firmware NMI handler (typically LPAR) */ extern int fwnmi_active; -extern void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr); - static int ras_get_sensor_state_token; static int ras_check_exception_token; diff --git a/arch/ppc64/kernel/rtas_pci.c b/arch/ppc64/kernel/rtas_pci.c index 1048817befb8..4a9719b48abe 100644 --- a/arch/ppc64/kernel/rtas_pci.c +++ b/arch/ppc64/kernel/rtas_pci.c @@ -48,7 +48,7 @@ static int write_pci_config; static int ibm_read_pci_config; static int ibm_write_pci_config; -static int config_access_valid(struct device_node *dn, int where) +static int config_access_valid(struct pci_dn *dn, int where) { if (where < 256) return 1; @@ -58,20 +58,37 @@ static int config_access_valid(struct device_node *dn, int where) return 0; } +static int of_device_available(struct device_node * dn) +{ + char * status; + + status = get_property(dn, "status", NULL); + + if (!status) + return 1; + + if (!strcmp(status, "okay")) + return 1; + + return 0; +} + static int rtas_read_config(struct device_node *dn, int where, int size, u32 *val) { int returnval = -1; unsigned long buid, addr; int ret; + struct pci_dn *pdn; - if (!dn) + if (!dn || !dn->data) return PCIBIOS_DEVICE_NOT_FOUND; - if (!config_access_valid(dn, where)) + pdn = dn->data; + if (!config_access_valid(pdn, where)) return PCIBIOS_BAD_REGISTER_NUMBER; - addr = ((where & 0xf00) << 20) | (dn->busno << 16) | - (dn->devfn << 8) | (where & 0xff); - buid = dn->phb->buid; + addr = ((where & 0xf00) << 20) | (pdn->busno << 16) | + (pdn->devfn << 8) | (where & 0xff); + buid = pdn->phb->buid; if (buid) { ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval, addr, buid >> 32, buid & 0xffffffff, size); @@ -83,8 +100,8 @@ static int rtas_read_config(struct device_node *dn, int where, int size, u32 *va if (ret) return PCIBIOS_DEVICE_NOT_FOUND; - if (returnval == EEH_IO_ERROR_VALUE(size) - && eeh_dn_check_failure (dn, NULL)) + if (returnval == EEH_IO_ERROR_VALUE(size) && + eeh_dn_check_failure (dn, NULL)) return PCIBIOS_DEVICE_NOT_FOUND; return PCIBIOS_SUCCESSFUL; @@ -103,24 +120,28 @@ static int rtas_pci_read_config(struct pci_bus *bus, /* Search only direct children of the bus */ for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->devfn == devfn) + if (dn->data && PCI_DN(dn)->devfn == devfn + && of_device_available(dn)) return rtas_read_config(dn, where, size, val); + return PCIBIOS_DEVICE_NOT_FOUND; } -static int rtas_write_config(struct device_node *dn, int where, int size, u32 val) +int rtas_write_config(struct device_node *dn, int where, int size, u32 val) { unsigned long buid, addr; int ret; + struct pci_dn *pdn; - if (!dn) + if (!dn || !dn->data) return PCIBIOS_DEVICE_NOT_FOUND; - if (!config_access_valid(dn, where)) + pdn = dn->data; + if (!config_access_valid(pdn, where)) return PCIBIOS_BAD_REGISTER_NUMBER; - addr = ((where & 0xf00) << 20) | (dn->busno << 16) | - (dn->devfn << 8) | (where & 0xff); - buid = dn->phb->buid; + addr = ((where & 0xf00) << 20) | (pdn->busno << 16) | + (pdn->devfn << 8) | (where & 0xff); + buid = pdn->phb->buid; if (buid) { ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, buid >> 32, buid & 0xffffffff, size, (ulong) val); } else { @@ -146,7 +167,8 @@ static int rtas_pci_write_config(struct pci_bus *bus, /* Search only direct children of the bus */ for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->devfn == devfn) + if (dn->data && PCI_DN(dn)->devfn == devfn + && of_device_available(dn)) return rtas_write_config(dn, where, size, val); return PCIBIOS_DEVICE_NOT_FOUND; } diff --git a/arch/ppc64/kernel/rtasd.c b/arch/ppc64/kernel/rtasd.c index b0c3b829fe47..e26b0420b6dd 100644 --- a/arch/ppc64/kernel/rtasd.c +++ b/arch/ppc64/kernel/rtasd.c @@ -19,6 +19,7 @@ #include <linux/vmalloc.h> #include <linux/spinlock.h> #include <linux/cpu.h> +#include <linux/delay.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -412,8 +413,7 @@ static void do_event_scan_all_cpus(long delay) /* Drop hotplug lock, and sleep for the specified delay */ unlock_cpu_hotplug(); - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(delay); + msleep_interruptible(delay); lock_cpu_hotplug(); cpu = next_cpu(cpu, cpu_online_map); @@ -442,7 +442,7 @@ static int rtasd(void *unused) printk(KERN_INFO "RTAS daemon started\n"); - DEBUG("will sleep for %d jiffies\n", (HZ*60/rtas_event_scan_rate) / 2); + DEBUG("will sleep for %d milliseconds\n", (30000/rtas_event_scan_rate)); /* See if we have any error stored in NVRAM */ memset(logdata, 0, rtas_error_log_max); @@ -459,7 +459,7 @@ static int rtasd(void *unused) } /* First pass. */ - do_event_scan_all_cpus(HZ); + do_event_scan_all_cpus(1000); if (surveillance_timeout != -1) { DEBUG("enabling surveillance\n"); @@ -471,7 +471,7 @@ static int rtasd(void *unused) * machines have problems if we call event-scan too * quickly. */ for (;;) - do_event_scan_all_cpus((HZ*60/rtas_event_scan_rate) / 2); + do_event_scan_all_cpus(30000/rtas_event_scan_rate); error: /* Should delete proc entries */ diff --git a/arch/ppc64/kernel/rtc.c b/arch/ppc64/kernel/rtc.c index d729fefa0df5..6ff52bc61325 100644 --- a/arch/ppc64/kernel/rtc.c +++ b/arch/ppc64/kernel/rtc.c @@ -35,6 +35,7 @@ #include <linux/spinlock.h> #include <linux/bcd.h> #include <linux/interrupt.h> +#include <linux/delay.h> #include <asm/io.h> #include <asm/uaccess.h> @@ -351,8 +352,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm) return; /* delay not allowed */ } wait_time = rtas_extended_busy_delay_time(error); - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(wait_time); + msleep_interruptible(wait_time); error = RTAS_CLOCK_BUSY; } } while (error == RTAS_CLOCK_BUSY && (__get_tb() < max_wait_tb)); @@ -386,8 +386,7 @@ int rtas_set_rtc_time(struct rtc_time *tm) if (in_interrupt()) return 1; /* probably decrementer */ wait_time = rtas_extended_busy_delay_time(error); - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(wait_time); + msleep_interruptible(wait_time); error = RTAS_CLOCK_BUSY; } } while (error == RTAS_CLOCK_BUSY && (__get_tb() < max_wait_tb)); diff --git a/arch/ppc64/kernel/scanlog.c b/arch/ppc64/kernel/scanlog.c index 4d70736619c7..215bf8900304 100644 --- a/arch/ppc64/kernel/scanlog.c +++ b/arch/ppc64/kernel/scanlog.c @@ -25,6 +25,7 @@ #include <linux/errno.h> #include <linux/proc_fs.h> #include <linux/init.h> +#include <linux/delay.h> #include <asm/uaccess.h> #include <asm/rtas.h> #include <asm/prom.h> @@ -77,7 +78,7 @@ static ssize_t scanlog_read(struct file *file, char __user *buf, return -EFAULT; for (;;) { - wait_time = HZ/2; /* default wait if no data */ + wait_time = 500; /* default wait if no data */ spin_lock(&rtas_data_buf_lock); memcpy(rtas_data_buf, data, RTAS_DATA_BUF_SIZE); status = rtas_call(ibm_scan_log_dump, 2, 1, NULL, @@ -107,24 +108,14 @@ static ssize_t scanlog_read(struct file *file, char __user *buf, break; default: if (status > 9900 && status <= 9905) { - /* No data. RTAS is hinting at a delay required - * between 1-100000 milliseconds - */ - int ms = 1; - for (; status > 9900; status--) - ms = ms * 10; - /* Use microseconds for reasonable accuracy */ - ms *= 1000; - wait_time = ms / (1000000/HZ); /* round down is fine */ - /* Fall through to sleep */ + wait_time = rtas_extended_busy_delay_time(status); } else { printk(KERN_ERR "scanlog: unknown error from rtas: %d\n", status); return -EIO; } } /* Apparently no data yet. Wait and try again. */ - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(wait_time); + msleep_interruptible(wait_time); } /*NOTREACHED*/ } diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c index e9c24d2dbd91..5ac48bd64891 100644 --- a/arch/ppc64/kernel/setup.c +++ b/arch/ppc64/kernel/setup.c @@ -25,7 +25,7 @@ #include <linux/seq_file.h> #include <linux/ioport.h> #include <linux/console.h> -#include <linux/version.h> +#include <linux/utsname.h> #include <linux/tty.h> #include <linux/root_dev.h> #include <linux/notifier.h> @@ -89,7 +89,7 @@ extern void udbg_init_maple_realmode(void); #define EARLY_DEBUG_INIT() udbg_init_maple_realmode() #define EARLY_DEBUG_INIT() udbg_init_pmac_realmode() #define EARLY_DEBUG_INIT() \ - do { ppc_md.udbg_putc = call_rtas_display_status_delay; } while(0) + do { udbg_putc = call_rtas_display_status_delay; } while(0) #endif /* extern void *stab; */ @@ -108,7 +108,6 @@ int boot_cpuid = 0; int boot_cpuid_phys = 0; dev_t boot_dev; u64 ppc64_pft_size; -u64 ppc64_debug_switch; struct ppc64_caches ppc64_caches; EXPORT_SYMBOL_GPL(ppc64_caches); @@ -154,34 +153,6 @@ struct screen_info screen_info = { .orig_video_points = 16 }; -/* - * Initialize the PPCDBG state. Called before relocation has been enabled. - */ -void __init ppcdbg_initialize(void) -{ - ppc64_debug_switch = PPC_DEBUG_DEFAULT; /* | PPCDBG_BUSWALK | */ - /* PPCDBG_PHBINIT | PPCDBG_MM | PPCDBG_MMINIT | PPCDBG_TCEINIT | PPCDBG_TCE */; -} - -/* - * Early boot console based on udbg - */ -static struct console udbg_console = { - .name = "udbg", - .write = udbg_console_write, - .flags = CON_PRINTBUFFER, - .index = -1, -}; -static int early_console_initialized; - -void __init disable_early_printk(void) -{ - if (!early_console_initialized) - return; - unregister_console(&udbg_console); - early_console_initialized = 0; -} - #if defined(CONFIG_PPC_MULTIPLATFORM) && defined(CONFIG_SMP) static int smt_enabled_cmdline; @@ -425,12 +396,6 @@ void __init early_setup(unsigned long dt_ptr) } ppc_md = **mach; - /* our udbg callbacks got overriden by the above, let's put them - * back in. Ultimately, I want those things to be split from the - * main ppc_md - */ - EARLY_DEBUG_INIT(); - DBG("Found, Initializing memory management...\n"); /* @@ -536,15 +501,19 @@ static void __init check_for_initrd(void) DBG(" -> check_for_initrd()\n"); - prop = (u64 *)get_property(of_chosen, "linux,initrd-start", NULL); - if (prop != NULL) { - initrd_start = (unsigned long)__va(*prop); - prop = (u64 *)get_property(of_chosen, "linux,initrd-end", NULL); + if (of_chosen) { + prop = (u64 *)get_property(of_chosen, + "linux,initrd-start", NULL); if (prop != NULL) { - initrd_end = (unsigned long)__va(*prop); - initrd_below_start_ok = 1; - } else - initrd_start = 0; + initrd_start = (unsigned long)__va(*prop); + prop = (u64 *)get_property(of_chosen, + "linux,initrd-end", NULL); + if (prop != NULL) { + initrd_end = (unsigned long)__va(*prop); + initrd_below_start_ok = 1; + } else + initrd_start = 0; + } } /* If we were passed an initrd, set the ROOT_DEV properly if the values @@ -627,13 +596,12 @@ void __init setup_system(void) * Initialize xmon */ #ifdef CONFIG_XMON_DEFAULT - xmon_init(); + xmon_init(1); #endif /* * Register early console */ - early_console_initialized = 1; - register_console(&udbg_console); + register_early_udbg_console(); /* Save unparsed command line copy for /proc/cmdline */ strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); @@ -653,7 +621,7 @@ void __init setup_system(void) smp_release_cpus(); #endif /* defined(CONFIG_SMP) && !defined(CONFIG_PPC_ISERIES) */ - printk("Starting Linux PPC64 %s\n", UTS_RELEASE); + printk("Starting Linux PPC64 %s\n", system_utsname.version); printk("-----------------------------------------------------\n"); printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size); @@ -1096,8 +1064,6 @@ void __init setup_arch(char **cmdline_p) #define PPC64_LINUX_FUNCTION 0x0f000000 #define PPC64_IPL_MESSAGE 0xc0000000 #define PPC64_TERM_MESSAGE 0xb0000000 -#define PPC64_ATTN_MESSAGE 0xa0000000 -#define PPC64_DUMP_MESSAGE 0xd0000000 static void ppc64_do_msg(unsigned int src, const char *msg) { @@ -1125,20 +1091,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg) printk("[terminate]%04x %s\n", src, msg); } -/* Print something that needs attention (device error, etc) */ -void ppc64_attention_msg(unsigned int src, const char *msg) -{ - ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_ATTN_MESSAGE|src, msg); - printk("[attention]%04x %s\n", src, msg); -} - -/* Print a dump progress message. */ -void ppc64_dump_msg(unsigned int src, const char *msg) -{ - ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_DUMP_MESSAGE|src, msg); - printk("[dump]%04x %s\n", src, msg); -} - /* This should only be called on processor 0 during calibrate decr */ void __init setup_default_decr(void) { @@ -1315,7 +1267,7 @@ void __init generic_find_legacy_serial_ports(u64 *physport, static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_ports, }, @@ -1343,11 +1295,13 @@ static int __init early_xmon(char *p) /* ensure xmon is enabled */ if (p) { if (strncmp(p, "on", 2) == 0) - xmon_init(); + xmon_init(1); + if (strncmp(p, "off", 3) == 0) + xmon_init(0); if (strncmp(p, "early", 5) != 0) return 0; } - xmon_init(); + xmon_init(1); debugger(NULL); return 0; diff --git a/arch/ppc64/kernel/signal.c b/arch/ppc64/kernel/signal.c index bf782276984c..347112cca3c0 100644 --- a/arch/ppc64/kernel/signal.c +++ b/arch/ppc64/kernel/signal.c @@ -481,10 +481,11 @@ static int handle_signal(unsigned long sig, struct k_sigaction *ka, /* Set up Signal Frame */ ret = setup_rt_frame(sig, ka, info, oldset, regs); - if (ret && !(ka->sa.sa_flags & SA_NODEFER)) { + if (ret) { spin_lock_irq(¤t->sighand->siglock); sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); - sigaddset(¤t->blocked,sig); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked,sig); recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); } @@ -549,6 +550,15 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs) /* Whee! Actually deliver the signal. */ if (TRAP(regs) == 0x0C00) syscall_restart(regs, &ka); + + /* + * Reenable the DABR before delivering the signal to + * user space. The DABR will have been cleared if it + * triggered inside the kernel. + */ + if (current->thread.dabr) + set_dabr(current->thread.dabr); + return handle_signal(signr, &ka, &info, oldset, regs); } diff --git a/arch/ppc64/kernel/signal32.c b/arch/ppc64/kernel/signal32.c index 3c2fa5c284c0..a8b7a5a56bb4 100644 --- a/arch/ppc64/kernel/signal32.c +++ b/arch/ppc64/kernel/signal32.c @@ -970,17 +970,26 @@ int do_signal32(sigset_t *oldset, struct pt_regs *regs) newsp = regs->gpr[1]; newsp &= ~0xfUL; + /* + * Reenable the DABR before delivering the signal to + * user space. The DABR will have been cleared if it + * triggered inside the kernel. + */ + if (current->thread.dabr) + set_dabr(current->thread.dabr); + /* Whee! Actually deliver the signal. */ if (ka.sa.sa_flags & SA_SIGINFO) ret = handle_rt_signal32(signr, &ka, &info, oldset, regs, newsp); else ret = handle_signal32(signr, &ka, &info, oldset, regs, newsp); - if (ret && !(ka.sa.sa_flags & SA_NODEFER)) { + if (ret) { spin_lock_irq(¤t->sighand->siglock); sigorsets(¤t->blocked, ¤t->blocked, &ka.sa.sa_mask); - sigaddset(¤t->blocked, signr); + if (!(ka.sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked, signr); recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); } diff --git a/arch/ppc64/kernel/sys_ppc32.c b/arch/ppc64/kernel/sys_ppc32.c index 206619080e66..e93c13458910 100644 --- a/arch/ppc64/kernel/sys_ppc32.c +++ b/arch/ppc64/kernel/sys_ppc32.c @@ -708,62 +708,9 @@ asmlinkage int sys32_pciconfig_write(u32 bus, u32 dfn, u32 off, u32 len, u32 ubu compat_ptr(ubuf)); } -#define IOBASE_BRIDGE_NUMBER 0 -#define IOBASE_MEMORY 1 -#define IOBASE_IO 2 -#define IOBASE_ISA_IO 3 -#define IOBASE_ISA_MEM 4 - asmlinkage int sys32_pciconfig_iobase(u32 which, u32 in_bus, u32 in_devfn) { -#ifdef CONFIG_PCI - struct pci_controller* hose; - struct list_head *ln; - struct pci_bus *bus = NULL; - struct device_node *hose_node; - - /* Argh ! Please forgive me for that hack, but that's the - * simplest way to get existing XFree to not lockup on some - * G5 machines... So when something asks for bus 0 io base - * (bus 0 is HT root), we return the AGP one instead. - */ -#ifdef CONFIG_PPC_PMAC - if (systemcfg->platform == PLATFORM_POWERMAC && - machine_is_compatible("MacRISC4")) - if (in_bus == 0) - in_bus = 0xf0; -#endif /* CONFIG_PPC_PMAC */ - - /* That syscall isn't quite compatible with PCI domains, but it's - * used on pre-domains setup. We return the first match - */ - - for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) { - bus = pci_bus_b(ln); - if (in_bus >= bus->number && in_bus < (bus->number + bus->subordinate)) - break; - bus = NULL; - } - if (bus == NULL || bus->sysdata == NULL) - return -ENODEV; - - hose_node = (struct device_node *)bus->sysdata; - hose = hose_node->phb; - - switch (which) { - case IOBASE_BRIDGE_NUMBER: - return (long)hose->first_busno; - case IOBASE_MEMORY: - return (long)hose->pci_mem_offset; - case IOBASE_IO: - return (long)hose->io_base_phys; - case IOBASE_ISA_IO: - return (long)isa_io_base; - case IOBASE_ISA_MEM: - return -EINVAL; - } -#endif /* CONFIG_PCI */ - return -EOPNOTSUPP; + return sys_pciconfig_iobase(which, in_bus, in_devfn); } @@ -867,37 +814,6 @@ off_t ppc32_lseek(unsigned int fd, u32 offset, unsigned int origin) return sys_lseek(fd, (int)offset, origin); } -/* - * This is just a version for 32-bit applications which does - * not force O_LARGEFILE on. - */ -asmlinkage long sys32_open(const char __user * filename, int flags, int mode) -{ - char * tmp; - int fd, error; - - tmp = getname(filename); - fd = PTR_ERR(tmp); - if (!IS_ERR(tmp)) { - fd = get_unused_fd(); - if (fd >= 0) { - struct file * f = filp_open(tmp, flags, mode); - error = PTR_ERR(f); - if (IS_ERR(f)) - goto out_error; - fd_install(fd, f); - } -out: - putname(tmp); - } - return fd; - -out_error: - put_unused_fd(fd); - fd = error; - goto out; -} - /* Note: it is necessary to treat bufsiz as an unsigned int, * with the corresponding cast to a signed int to insure that the * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode) diff --git a/arch/ppc64/kernel/syscalls.c b/arch/ppc64/kernel/syscalls.c index a8cbb202b8cd..05f16633bd2c 100644 --- a/arch/ppc64/kernel/syscalls.c +++ b/arch/ppc64/kernel/syscalls.c @@ -46,10 +46,6 @@ extern unsigned long wall_jiffies; -void -check_bugs(void) -{ -} /* * sys_ipc() is the de-multiplexer for the SysV IPC calls.. diff --git a/arch/ppc64/kernel/sysfs.c b/arch/ppc64/kernel/sysfs.c index 02b8ac4e0168..6654b350979c 100644 --- a/arch/ppc64/kernel/sysfs.c +++ b/arch/ppc64/kernel/sysfs.c @@ -13,6 +13,7 @@ #include <asm/current.h> #include <asm/processor.h> #include <asm/cputable.h> +#include <asm/firmware.h> #include <asm/hvcall.h> #include <asm/prom.h> #include <asm/systemcfg.h> @@ -100,6 +101,8 @@ static int __init setup_smt_snooze_delay(char *str) } __setup("smt-snooze-delay=", setup_smt_snooze_delay); +#endif /* CONFIG_PPC_MULTIPLATFORM */ + /* * Enabling PMCs will slow partition context switch times so we only do * it the first time we write to the PMCs. @@ -109,65 +112,15 @@ static DEFINE_PER_CPU(char, pmcs_enabled); void ppc64_enable_pmcs(void) { - unsigned long hid0; -#ifdef CONFIG_PPC_PSERIES - unsigned long set, reset; -#endif /* CONFIG_PPC_PSERIES */ - /* Only need to enable them once */ if (__get_cpu_var(pmcs_enabled)) return; __get_cpu_var(pmcs_enabled) = 1; - switch (systemcfg->platform) { - case PLATFORM_PSERIES: - case PLATFORM_POWERMAC: - hid0 = mfspr(HID0); - hid0 |= 1UL << (63 - 20); - - /* POWER4 requires the following sequence */ - asm volatile( - "sync\n" - "mtspr %1, %0\n" - "mfspr %0, %1\n" - "mfspr %0, %1\n" - "mfspr %0, %1\n" - "mfspr %0, %1\n" - "mfspr %0, %1\n" - "mfspr %0, %1\n" - "isync" : "=&r" (hid0) : "i" (HID0), "0" (hid0): - "memory"); - break; - -#ifdef CONFIG_PPC_PSERIES - case PLATFORM_PSERIES_LPAR: - set = 1UL << 63; - reset = 0; - plpar_hcall_norets(H_PERFMON, set, reset); - break; -#endif /* CONFIG_PPC_PSERIES */ - - default: - break; - } - -#ifdef CONFIG_PPC_PSERIES - /* instruct hypervisor to maintain PMCs */ - if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) - get_paca()->lppaca.pmcregs_in_use = 1; -#endif /* CONFIG_PPC_PSERIES */ + if (ppc_md.enable_pmcs) + ppc_md.enable_pmcs(); } - -#else - -/* PMC stuff */ -void ppc64_enable_pmcs(void) -{ - /* XXX Implement for iseries */ -} -#endif /* CONFIG_PPC_MULTIPLATFORM */ - EXPORT_SYMBOL(ppc64_enable_pmcs); /* XXX convert to rusty's on_one_cpu */ @@ -262,18 +215,23 @@ static void register_cpu_online(unsigned int cpu) if (cpu_has_feature(CPU_FTR_MMCRA)) sysdev_create_file(s, &attr_mmcra); - sysdev_create_file(s, &attr_pmc1); - sysdev_create_file(s, &attr_pmc2); - sysdev_create_file(s, &attr_pmc3); - sysdev_create_file(s, &attr_pmc4); - sysdev_create_file(s, &attr_pmc5); - sysdev_create_file(s, &attr_pmc6); - - if (cpu_has_feature(CPU_FTR_PMC8)) { + if (cur_cpu_spec->num_pmcs >= 1) + sysdev_create_file(s, &attr_pmc1); + if (cur_cpu_spec->num_pmcs >= 2) + sysdev_create_file(s, &attr_pmc2); + if (cur_cpu_spec->num_pmcs >= 3) + sysdev_create_file(s, &attr_pmc3); + if (cur_cpu_spec->num_pmcs >= 4) + sysdev_create_file(s, &attr_pmc4); + if (cur_cpu_spec->num_pmcs >= 5) + sysdev_create_file(s, &attr_pmc5); + if (cur_cpu_spec->num_pmcs >= 6) + sysdev_create_file(s, &attr_pmc6); + if (cur_cpu_spec->num_pmcs >= 7) sysdev_create_file(s, &attr_pmc7); + if (cur_cpu_spec->num_pmcs >= 8) sysdev_create_file(s, &attr_pmc8); - } - + if (cpu_has_feature(CPU_FTR_SMT)) sysdev_create_file(s, &attr_purr); } @@ -299,17 +257,22 @@ static void unregister_cpu_online(unsigned int cpu) if (cpu_has_feature(CPU_FTR_MMCRA)) sysdev_remove_file(s, &attr_mmcra); - sysdev_remove_file(s, &attr_pmc1); - sysdev_remove_file(s, &attr_pmc2); - sysdev_remove_file(s, &attr_pmc3); - sysdev_remove_file(s, &attr_pmc4); - sysdev_remove_file(s, &attr_pmc5); - sysdev_remove_file(s, &attr_pmc6); - - if (cpu_has_feature(CPU_FTR_PMC8)) { + if (cur_cpu_spec->num_pmcs >= 1) + sysdev_remove_file(s, &attr_pmc1); + if (cur_cpu_spec->num_pmcs >= 2) + sysdev_remove_file(s, &attr_pmc2); + if (cur_cpu_spec->num_pmcs >= 3) + sysdev_remove_file(s, &attr_pmc3); + if (cur_cpu_spec->num_pmcs >= 4) + sysdev_remove_file(s, &attr_pmc4); + if (cur_cpu_spec->num_pmcs >= 5) + sysdev_remove_file(s, &attr_pmc5); + if (cur_cpu_spec->num_pmcs >= 6) + sysdev_remove_file(s, &attr_pmc6); + if (cur_cpu_spec->num_pmcs >= 7) sysdev_remove_file(s, &attr_pmc7); + if (cur_cpu_spec->num_pmcs >= 8) sysdev_remove_file(s, &attr_pmc8); - } if (cpu_has_feature(CPU_FTR_SMT)) sysdev_remove_file(s, &attr_purr); diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c index 909462e1adea..9939c206afa4 100644 --- a/arch/ppc64/kernel/time.c +++ b/arch/ppc64/kernel/time.c @@ -51,7 +51,6 @@ #include <linux/cpu.h> #include <linux/security.h> -#include <asm/segment.h> #include <asm/io.h> #include <asm/processor.h> #include <asm/nvram.h> @@ -67,6 +66,7 @@ #include <asm/prom.h> #include <asm/sections.h> #include <asm/systemcfg.h> +#include <asm/firmware.h> u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES; @@ -128,7 +128,7 @@ static __inline__ void timer_check_rtc(void) * We should have an rtc call that only sets the minutes and * seconds like on Intel to avoid problems with non UTC clocks. */ - if ( (time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec - last_rtc_update >= 659 && abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ && jiffies - wall_jiffies == 1) { @@ -370,13 +370,11 @@ int timer_interrupt(struct pt_regs * regs) process_hvlpevents(regs); #endif -/* collect purr register values often, for accurate calculations */ -#if defined(CONFIG_PPC_PSERIES) - if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) { + /* collect purr register values often, for accurate calculations */ + if (firmware_has_feature(FW_FEATURE_SPLPAR)) { struct cpu_usage *cu = &__get_cpu_var(cpu_usage_array); cu->current_tb = mfspr(SPRN_PURR); } -#endif irq_exit(); @@ -437,10 +435,7 @@ int do_settimeofday(struct timespec *tv) */ last_rtc_update = new_sec - 658; - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); delta_xsec = mulhdu( (tb_last_stamp-do_gtod.varp->tb_orig_stamp), do_gtod.varp->tb_to_xs ); diff --git a/arch/ppc64/kernel/traps.c b/arch/ppc64/kernel/traps.c index a8d5e83ee89f..7467ae508e6e 100644 --- a/arch/ppc64/kernel/traps.c +++ b/arch/ppc64/kernel/traps.c @@ -30,6 +30,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/delay.h> +#include <linux/kprobes.h> #include <asm/kdebug.h> #include <asm/pgtable.h> @@ -220,7 +221,7 @@ void instruction_breakpoint_exception(struct pt_regs *regs) _exception(SIGTRAP, regs, TRAP_BRKPT, regs->nip); } -void single_step_exception(struct pt_regs *regs) +void __kprobes single_step_exception(struct pt_regs *regs) { regs->msr &= ~MSR_SE; /* Turn off 'trace' bit */ @@ -398,7 +399,7 @@ check_bug_trap(struct pt_regs *regs) return 0; } -void program_check_exception(struct pt_regs *regs) +void __kprobes program_check_exception(struct pt_regs *regs) { if (debugger_fault_handler(regs)) return; diff --git a/arch/ppc64/kernel/u3_iommu.c b/arch/ppc64/kernel/u3_iommu.c index b6e3bca4102d..41ea09cb9ac7 100644 --- a/arch/ppc64/kernel/u3_iommu.c +++ b/arch/ppc64/kernel/u3_iommu.c @@ -276,7 +276,7 @@ static void iommu_dev_setup_u3(struct pci_dev *dev) dn = pci_device_to_OF_node(dev); if (dn) - dn->iommu_table = &iommu_table_u3; + PCI_DN(dn)->iommu_table = &iommu_table_u3; } static void iommu_bus_setup_u3(struct pci_bus *bus) @@ -291,7 +291,7 @@ static void iommu_bus_setup_u3(struct pci_bus *bus) dn = pci_bus_to_OF_node(bus); if (dn) - dn->iommu_table = &iommu_table_u3; + PCI_DN(dn)->iommu_table = &iommu_table_u3; } static void iommu_dev_setup_null(struct pci_dev *dev) { } diff --git a/arch/ppc64/kernel/udbg.c b/arch/ppc64/kernel/udbg.c index c0da45540f0f..d49c3613c8ec 100644 --- a/arch/ppc64/kernel/udbg.c +++ b/arch/ppc64/kernel/udbg.c @@ -1,5 +1,5 @@ /* - * NS16550 Serial Port (uart) debugging stuff. + * polling mode stateless debugging stuff, originally for NS16550 Serial Ports * * c 2001 PPC 64 Team, IBM Corp * @@ -13,249 +13,24 @@ #define WANT_PPCDBG_TAB /* Only defined here */ #include <linux/config.h> #include <linux/types.h> +#include <linux/sched.h> +#include <linux/console.h> #include <asm/ppcdebug.h> #include <asm/processor.h> -#include <asm/uaccess.h> -#include <asm/machdep.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/pmac_feature.h> -extern u8 real_readb(volatile u8 __iomem *addr); -extern void real_writeb(u8 data, volatile u8 __iomem *addr); - -struct NS16550 { - /* this struct must be packed */ - unsigned char rbr; /* 0 */ - unsigned char ier; /* 1 */ - unsigned char fcr; /* 2 */ - unsigned char lcr; /* 3 */ - unsigned char mcr; /* 4 */ - unsigned char lsr; /* 5 */ - unsigned char msr; /* 6 */ - unsigned char scr; /* 7 */ -}; - -#define thr rbr -#define iir fcr -#define dll rbr -#define dlm ier -#define dlab lcr - -#define LSR_DR 0x01 /* Data ready */ -#define LSR_OE 0x02 /* Overrun */ -#define LSR_PE 0x04 /* Parity error */ -#define LSR_FE 0x08 /* Framing error */ -#define LSR_BI 0x10 /* Break */ -#define LSR_THRE 0x20 /* Xmit holding register empty */ -#define LSR_TEMT 0x40 /* Xmitter empty */ -#define LSR_ERR 0x80 /* Error */ - -static volatile struct NS16550 __iomem *udbg_comport; - -void udbg_init_uart(void __iomem *comport, unsigned int speed) -{ - u16 dll = speed ? (115200 / speed) : 12; - - if (comport) { - udbg_comport = (struct NS16550 __iomem *)comport; - out_8(&udbg_comport->lcr, 0x00); - out_8(&udbg_comport->ier, 0xff); - out_8(&udbg_comport->ier, 0x00); - out_8(&udbg_comport->lcr, 0x80); /* Access baud rate */ - out_8(&udbg_comport->dll, dll & 0xff); /* 1 = 115200, 2 = 57600, - 3 = 38400, 12 = 9600 baud */ - out_8(&udbg_comport->dlm, dll >> 8); /* dll >> 8 which should be zero - for fast rates; */ - out_8(&udbg_comport->lcr, 0x03); /* 8 data, 1 stop, no parity */ - out_8(&udbg_comport->mcr, 0x03); /* RTS/DTR */ - out_8(&udbg_comport->fcr ,0x07); /* Clear & enable FIFOs */ - } -} - -#ifdef CONFIG_PPC_PMAC - -#define SCC_TXRDY 4 -#define SCC_RXRDY 1 - -static volatile u8 __iomem *sccc; -static volatile u8 __iomem *sccd; - -static unsigned char scc_inittab[] = { - 13, 0, /* set baud rate divisor */ - 12, 0, - 14, 1, /* baud rate gen enable, src=rtxc */ - 11, 0x50, /* clocks = br gen */ - 5, 0xea, /* tx 8 bits, assert DTR & RTS */ - 4, 0x46, /* x16 clock, 1 stop */ - 3, 0xc1, /* rx enable, 8 bits */ -}; - -void udbg_init_scc(struct device_node *np) -{ - u32 *reg; - unsigned long addr; - int i, x; - - if (np == NULL) - np = of_find_node_by_name(NULL, "escc"); - if (np == NULL || np->parent == NULL) - return; - - udbg_printf("found SCC...\n"); - /* Get address within mac-io ASIC */ - reg = (u32 *)get_property(np, "reg", NULL); - if (reg == NULL) - return; - addr = reg[0]; - udbg_printf("local addr: %lx\n", addr); - /* Get address of mac-io PCI itself */ - reg = (u32 *)get_property(np->parent, "assigned-addresses", NULL); - if (reg == NULL) - return; - addr += reg[2]; - udbg_printf("final addr: %lx\n", addr); - - /* Setup for 57600 8N1 */ - addr += 0x20; - sccc = (volatile u8 * __iomem) ioremap(addr & PAGE_MASK, PAGE_SIZE) ; - sccc += addr & ~PAGE_MASK; - sccd = sccc + 0x10; - - udbg_printf("ioremap result sccc: %p\n", sccc); - mb(); - - for (i = 20000; i != 0; --i) - x = in_8(sccc); - out_8(sccc, 0x09); /* reset A or B side */ - out_8(sccc, 0xc0); - for (i = 0; i < sizeof(scc_inittab); ++i) - out_8(sccc, scc_inittab[i]); - - ppc_md.udbg_putc = udbg_putc; - ppc_md.udbg_getc = udbg_getc; - ppc_md.udbg_getc_poll = udbg_getc_poll; - - udbg_puts("Hello World !\n"); -} - -#endif /* CONFIG_PPC_PMAC */ - -#ifdef CONFIG_PPC_PMAC -static void udbg_real_putc(unsigned char c) -{ - while ((real_readb(sccc) & SCC_TXRDY) == 0) - ; - real_writeb(c, sccd); - if (c == '\n') - udbg_real_putc('\r'); -} - -void udbg_init_pmac_realmode(void) -{ - sccc = (volatile u8 __iomem *)0x80013020ul; - sccd = (volatile u8 __iomem *)0x80013030ul; - - ppc_md.udbg_putc = udbg_real_putc; - ppc_md.udbg_getc = NULL; - ppc_md.udbg_getc_poll = NULL; -} -#endif /* CONFIG_PPC_PMAC */ - -#ifdef CONFIG_PPC_MAPLE -void udbg_maple_real_putc(unsigned char c) -{ - if (udbg_comport) { - while ((real_readb(&udbg_comport->lsr) & LSR_THRE) == 0) - /* wait for idle */; - real_writeb(c, &udbg_comport->thr); eieio(); - if (c == '\n') { - /* Also put a CR. This is for convenience. */ - while ((real_readb(&udbg_comport->lsr) & LSR_THRE) == 0) - /* wait for idle */; - real_writeb('\r', &udbg_comport->thr); eieio(); - } - } -} - -void udbg_init_maple_realmode(void) -{ - udbg_comport = (volatile struct NS16550 __iomem *)0xf40003f8; - - ppc_md.udbg_putc = udbg_maple_real_putc; - ppc_md.udbg_getc = NULL; - ppc_md.udbg_getc_poll = NULL; -} -#endif /* CONFIG_PPC_MAPLE */ - -void udbg_putc(unsigned char c) -{ - if (udbg_comport) { - while ((in_8(&udbg_comport->lsr) & LSR_THRE) == 0) - /* wait for idle */; - out_8(&udbg_comport->thr, c); - if (c == '\n') { - /* Also put a CR. This is for convenience. */ - while ((in_8(&udbg_comport->lsr) & LSR_THRE) == 0) - /* wait for idle */; - out_8(&udbg_comport->thr, '\r'); - } - } -#ifdef CONFIG_PPC_PMAC - else if (sccc) { - while ((in_8(sccc) & SCC_TXRDY) == 0) - ; - out_8(sccd, c); - if (c == '\n') - udbg_putc('\r'); - } -#endif /* CONFIG_PPC_PMAC */ -} - -int udbg_getc_poll(void) -{ - if (udbg_comport) { - if ((in_8(&udbg_comport->lsr) & LSR_DR) != 0) - return in_8(&udbg_comport->rbr); - else - return -1; - } -#ifdef CONFIG_PPC_PMAC - else if (sccc) { - if ((in_8(sccc) & SCC_RXRDY) != 0) - return in_8(sccd); - else - return -1; - } -#endif /* CONFIG_PPC_PMAC */ - return -1; -} - -unsigned char udbg_getc(void) -{ - if (udbg_comport) { - while ((in_8(&udbg_comport->lsr) & LSR_DR) == 0) - /* wait for char */; - return in_8(&udbg_comport->rbr); - } -#ifdef CONFIG_PPC_PMAC - else if (sccc) { - while ((in_8(sccc) & SCC_RXRDY) == 0) - ; - return in_8(sccd); - } -#endif /* CONFIG_PPC_PMAC */ - return 0; -} +void (*udbg_putc)(unsigned char c); +unsigned char (*udbg_getc)(void); +int (*udbg_getc_poll)(void); +/* udbg library, used by xmon et al */ void udbg_puts(const char *s) { - if (ppc_md.udbg_putc) { + if (udbg_putc) { char c; if (s && *s != '\0') { while ((c = *s++) != '\0') - ppc_md.udbg_putc(c); + udbg_putc(c); } } #if 0 @@ -270,12 +45,12 @@ int udbg_write(const char *s, int n) int remain = n; char c; - if (!ppc_md.udbg_putc) + if (!udbg_putc) return 0; if (s && *s != '\0') { while (((c = *s++) != '\0') && (remain-- > 0)) { - ppc_md.udbg_putc(c); + udbg_putc(c); } } @@ -287,12 +62,12 @@ int udbg_read(char *buf, int buflen) char c, *p = buf; int i; - if (!ppc_md.udbg_getc) + if (!udbg_getc) return 0; for (i = 0; i < buflen; ++i) { do { - c = ppc_md.udbg_getc(); + c = udbg_getc(); } while (c == 0x11 || c == 0x13); if (c == 0) break; @@ -302,11 +77,6 @@ int udbg_read(char *buf, int buflen) return i; } -void udbg_console_write(struct console *con, const char *s, unsigned int n) -{ - udbg_write(s, n); -} - #define UDBG_BUFSIZE 256 void udbg_printf(const char *fmt, ...) { @@ -319,6 +89,10 @@ void udbg_printf(const char *fmt, ...) va_end(args); } +/* PPCDBG stuff */ + +u64 ppc64_debug_switch; + /* Special print used by PPCDBG() macro */ void udbg_ppcdbg(unsigned long debug_flags, const char *fmt, ...) { @@ -358,3 +132,49 @@ unsigned long udbg_ifdebug(unsigned long flags) { return (flags & ppc64_debug_switch); } + +/* + * Initialize the PPCDBG state. Called before relocation has been enabled. + */ +void __init ppcdbg_initialize(void) +{ + ppc64_debug_switch = PPC_DEBUG_DEFAULT; /* | PPCDBG_BUSWALK | */ + /* PPCDBG_PHBINIT | PPCDBG_MM | PPCDBG_MMINIT | PPCDBG_TCEINIT | PPCDBG_TCE */; +} + +/* + * Early boot console based on udbg + */ +static void udbg_console_write(struct console *con, const char *s, + unsigned int n) +{ + udbg_write(s, n); +} + +static struct console udbg_console = { + .name = "udbg", + .write = udbg_console_write, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +static int early_console_initialized; + +void __init disable_early_printk(void) +{ + if (!early_console_initialized) + return; + unregister_console(&udbg_console); + early_console_initialized = 0; +} + +/* called by setup_system */ +void register_early_udbg_console(void) +{ + early_console_initialized = 1; + register_console(&udbg_console); +} + +#if 0 /* if you want to use this as a regular output console */ +console_initcall(register_udbg_console); +#endif diff --git a/arch/ppc64/kernel/udbg_16550.c b/arch/ppc64/kernel/udbg_16550.c new file mode 100644 index 000000000000..9313574ab935 --- /dev/null +++ b/arch/ppc64/kernel/udbg_16550.c @@ -0,0 +1,123 @@ +/* + * udbg for for NS16550 compatable serial ports + * + * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/config.h> +#include <linux/types.h> +#include <asm/udbg.h> +#include <asm/io.h> + +extern u8 real_readb(volatile u8 __iomem *addr); +extern void real_writeb(u8 data, volatile u8 __iomem *addr); + +struct NS16550 { + /* this struct must be packed */ + unsigned char rbr; /* 0 */ + unsigned char ier; /* 1 */ + unsigned char fcr; /* 2 */ + unsigned char lcr; /* 3 */ + unsigned char mcr; /* 4 */ + unsigned char lsr; /* 5 */ + unsigned char msr; /* 6 */ + unsigned char scr; /* 7 */ +}; + +#define thr rbr +#define iir fcr +#define dll rbr +#define dlm ier +#define dlab lcr + +#define LSR_DR 0x01 /* Data ready */ +#define LSR_OE 0x02 /* Overrun */ +#define LSR_PE 0x04 /* Parity error */ +#define LSR_FE 0x08 /* Framing error */ +#define LSR_BI 0x10 /* Break */ +#define LSR_THRE 0x20 /* Xmit holding register empty */ +#define LSR_TEMT 0x40 /* Xmitter empty */ +#define LSR_ERR 0x80 /* Error */ + +static volatile struct NS16550 __iomem *udbg_comport; + +static void udbg_550_putc(unsigned char c) +{ + if (udbg_comport) { + while ((in_8(&udbg_comport->lsr) & LSR_THRE) == 0) + /* wait for idle */; + out_8(&udbg_comport->thr, c); + if (c == '\n') + udbg_550_putc('\r'); + } +} + +static int udbg_550_getc_poll(void) +{ + if (udbg_comport) { + if ((in_8(&udbg_comport->lsr) & LSR_DR) != 0) + return in_8(&udbg_comport->rbr); + else + return -1; + } + return -1; +} + +static unsigned char udbg_550_getc(void) +{ + if (udbg_comport) { + while ((in_8(&udbg_comport->lsr) & LSR_DR) == 0) + /* wait for char */; + return in_8(&udbg_comport->rbr); + } + return 0; +} + +void udbg_init_uart(void __iomem *comport, unsigned int speed) +{ + u16 dll = speed ? (115200 / speed) : 12; + + if (comport) { + udbg_comport = (struct NS16550 __iomem *)comport; + out_8(&udbg_comport->lcr, 0x00); + out_8(&udbg_comport->ier, 0xff); + out_8(&udbg_comport->ier, 0x00); + out_8(&udbg_comport->lcr, 0x80); /* Access baud rate */ + out_8(&udbg_comport->dll, dll & 0xff); /* 1 = 115200, 2 = 57600, + 3 = 38400, 12 = 9600 baud */ + out_8(&udbg_comport->dlm, dll >> 8); /* dll >> 8 which should be zero + for fast rates; */ + out_8(&udbg_comport->lcr, 0x03); /* 8 data, 1 stop, no parity */ + out_8(&udbg_comport->mcr, 0x03); /* RTS/DTR */ + out_8(&udbg_comport->fcr ,0x07); /* Clear & enable FIFOs */ + udbg_putc = udbg_550_putc; + udbg_getc = udbg_550_getc; + udbg_getc_poll = udbg_550_getc_poll; + } +} + +#ifdef CONFIG_PPC_MAPLE +void udbg_maple_real_putc(unsigned char c) +{ + if (udbg_comport) { + while ((real_readb(&udbg_comport->lsr) & LSR_THRE) == 0) + /* wait for idle */; + real_writeb(c, &udbg_comport->thr); eieio(); + if (c == '\n') + udbg_maple_real_putc('\r'); + } +} + +void udbg_init_maple_realmode(void) +{ + udbg_comport = (volatile struct NS16550 __iomem *)0xf40003f8; + + udbg_putc = udbg_maple_real_putc; + udbg_getc = NULL; + udbg_getc_poll = NULL; +} +#endif /* CONFIG_PPC_MAPLE */ diff --git a/arch/ppc64/kernel/udbg_scc.c b/arch/ppc64/kernel/udbg_scc.c new file mode 100644 index 000000000000..c47fd6c63531 --- /dev/null +++ b/arch/ppc64/kernel/udbg_scc.c @@ -0,0 +1,136 @@ +/* + * udbg for for zilog scc ports as found on Apple PowerMacs + * + * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/config.h> +#include <linux/types.h> +#include <asm/udbg.h> +#include <asm/processor.h> +#include <asm/naca.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pmac_feature.h> + +extern u8 real_readb(volatile u8 __iomem *addr); +extern void real_writeb(u8 data, volatile u8 __iomem *addr); + +#define SCC_TXRDY 4 +#define SCC_RXRDY 1 + +static volatile u8 __iomem *sccc; +static volatile u8 __iomem *sccd; + +static void udbg_scc_putc(unsigned char c) +{ + if (sccc) { + while ((in_8(sccc) & SCC_TXRDY) == 0) + ; + out_8(sccd, c); + if (c == '\n') + udbg_scc_putc('\r'); + } +} + +static int udbg_scc_getc_poll(void) +{ + if (sccc) { + if ((in_8(sccc) & SCC_RXRDY) != 0) + return in_8(sccd); + else + return -1; + } + return -1; +} + +static unsigned char udbg_scc_getc(void) +{ + if (sccc) { + while ((in_8(sccc) & SCC_RXRDY) == 0) + ; + return in_8(sccd); + } + return 0; +} + +static unsigned char scc_inittab[] = { + 13, 0, /* set baud rate divisor */ + 12, 0, + 14, 1, /* baud rate gen enable, src=rtxc */ + 11, 0x50, /* clocks = br gen */ + 5, 0xea, /* tx 8 bits, assert DTR & RTS */ + 4, 0x46, /* x16 clock, 1 stop */ + 3, 0xc1, /* rx enable, 8 bits */ +}; + +void udbg_init_scc(struct device_node *np) +{ + u32 *reg; + unsigned long addr; + int i, x; + + if (np == NULL) + np = of_find_node_by_name(NULL, "escc"); + if (np == NULL || np->parent == NULL) + return; + + udbg_printf("found SCC...\n"); + /* Get address within mac-io ASIC */ + reg = (u32 *)get_property(np, "reg", NULL); + if (reg == NULL) + return; + addr = reg[0]; + udbg_printf("local addr: %lx\n", addr); + /* Get address of mac-io PCI itself */ + reg = (u32 *)get_property(np->parent, "assigned-addresses", NULL); + if (reg == NULL) + return; + addr += reg[2]; + udbg_printf("final addr: %lx\n", addr); + + /* Setup for 57600 8N1 */ + addr += 0x20; + sccc = (volatile u8 * __iomem) ioremap(addr & PAGE_MASK, PAGE_SIZE) ; + sccc += addr & ~PAGE_MASK; + sccd = sccc + 0x10; + + udbg_printf("ioremap result sccc: %p\n", sccc); + mb(); + + for (i = 20000; i != 0; --i) + x = in_8(sccc); + out_8(sccc, 0x09); /* reset A or B side */ + out_8(sccc, 0xc0); + for (i = 0; i < sizeof(scc_inittab); ++i) + out_8(sccc, scc_inittab[i]); + + udbg_putc = udbg_scc_putc; + udbg_getc = udbg_scc_getc; + udbg_getc_poll = udbg_scc_getc_poll; + + udbg_puts("Hello World !\n"); +} + +static void udbg_real_scc_putc(unsigned char c) +{ + while ((real_readb(sccc) & SCC_TXRDY) == 0) + ; + real_writeb(c, sccd); + if (c == '\n') + udbg_real_scc_putc('\r'); +} + +void udbg_init_pmac_realmode(void) +{ + sccc = (volatile u8 __iomem *)0x80013020ul; + sccd = (volatile u8 __iomem *)0x80013030ul; + + udbg_putc = udbg_real_scc_putc; + udbg_getc = NULL; + udbg_getc_poll = NULL; +} diff --git a/arch/ppc64/kernel/vdso32/cacheflush.S b/arch/ppc64/kernel/vdso32/cacheflush.S index 0ed7ea721715..c8db993574ee 100644 --- a/arch/ppc64/kernel/vdso32/cacheflush.S +++ b/arch/ppc64/kernel/vdso32/cacheflush.S @@ -13,7 +13,7 @@ #include <asm/processor.h> #include <asm/ppc_asm.h> #include <asm/vdso.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> .text diff --git a/arch/ppc64/kernel/vdso32/datapage.S b/arch/ppc64/kernel/vdso32/datapage.S index 29b6bd32e1f1..4f4eb0be3992 100644 --- a/arch/ppc64/kernel/vdso32/datapage.S +++ b/arch/ppc64/kernel/vdso32/datapage.S @@ -12,7 +12,7 @@ #include <linux/config.h> #include <asm/processor.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/unistd.h> #include <asm/vdso.h> diff --git a/arch/ppc64/kernel/vdso32/gettimeofday.S b/arch/ppc64/kernel/vdso32/gettimeofday.S index 2b48bf1fb109..07f1c1c650c8 100644 --- a/arch/ppc64/kernel/vdso32/gettimeofday.S +++ b/arch/ppc64/kernel/vdso32/gettimeofday.S @@ -13,7 +13,7 @@ #include <asm/processor.h> #include <asm/ppc_asm.h> #include <asm/vdso.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/unistd.h> .text diff --git a/arch/ppc64/kernel/vdso64/cacheflush.S b/arch/ppc64/kernel/vdso64/cacheflush.S index e0725b7b7003..d4a0ad28d534 100644 --- a/arch/ppc64/kernel/vdso64/cacheflush.S +++ b/arch/ppc64/kernel/vdso64/cacheflush.S @@ -13,7 +13,7 @@ #include <asm/processor.h> #include <asm/ppc_asm.h> #include <asm/vdso.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> .text diff --git a/arch/ppc64/kernel/vdso64/datapage.S b/arch/ppc64/kernel/vdso64/datapage.S index 18afd971c9d9..ed6e599ae824 100644 --- a/arch/ppc64/kernel/vdso64/datapage.S +++ b/arch/ppc64/kernel/vdso64/datapage.S @@ -12,7 +12,7 @@ #include <linux/config.h> #include <asm/processor.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/unistd.h> #include <asm/vdso.h> diff --git a/arch/ppc64/kernel/vdso64/gettimeofday.S b/arch/ppc64/kernel/vdso64/gettimeofday.S index ed3f970ff05e..f6df8028570a 100644 --- a/arch/ppc64/kernel/vdso64/gettimeofday.S +++ b/arch/ppc64/kernel/vdso64/gettimeofday.S @@ -14,7 +14,7 @@ #include <asm/processor.h> #include <asm/ppc_asm.h> #include <asm/vdso.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> .text /* diff --git a/arch/ppc64/kernel/vio.c b/arch/ppc64/kernel/vio.c index 0c0ba71ac0e8..c90e1dd875ce 100644 --- a/arch/ppc64/kernel/vio.c +++ b/arch/ppc64/kernel/vio.c @@ -1,10 +1,11 @@ /* * IBM PowerPC Virtual I/O Infrastructure Support. * - * Copyright (c) 2003 IBM Corp. + * Copyright (c) 2003-2005 IBM Corp. * Dave Engebretsen engebret@us.ibm.com * Santiago Leon santil@us.ibm.com * Hollis Blanchard <hollisb@us.ibm.com> + * Stephen Rothwell * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -14,61 +15,30 @@ #include <linux/init.h> #include <linux/console.h> -#include <linux/version.h> #include <linux/module.h> -#include <linux/kobject.h> #include <linux/mm.h> #include <linux/dma-mapping.h> -#include <asm/rtas.h> #include <asm/iommu.h> #include <asm/dma.h> -#include <asm/ppcdebug.h> #include <asm/vio.h> -#include <asm/hvcall.h> -#include <asm/iSeries/vio.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/HvCallXm.h> -#include <asm/iSeries/HvLpConfig.h> - -#define DBGENTER() pr_debug("%s entered\n", __FUNCTION__) - -extern struct subsystem devices_subsys; /* needed for vio_find_name() */ static const struct vio_device_id *vio_match_device( const struct vio_device_id *, const struct vio_dev *); -#ifdef CONFIG_PPC_PSERIES -static struct iommu_table *vio_build_iommu_table(struct vio_dev *); -static int vio_num_address_cells; -#endif -#ifdef CONFIG_PPC_ISERIES -static struct iommu_table veth_iommu_table; -static struct iommu_table vio_iommu_table; -#endif -static struct vio_dev vio_bus_device = { /* fake "parent" device */ +struct vio_dev vio_bus_device = { /* fake "parent" device */ .name = vio_bus_device.dev.bus_id, .type = "", -#ifdef CONFIG_PPC_ISERIES - .iommu_table = &vio_iommu_table, -#endif .dev.bus_id = "vio", .dev.bus = &vio_bus_type, }; -#ifdef CONFIG_PPC_ISERIES -static struct vio_dev *__init vio_register_device_iseries(char *type, - uint32_t unit_num); - -struct device *iSeries_vio_dev = &vio_bus_device.dev; -EXPORT_SYMBOL(iSeries_vio_dev); - -#define device_is_compatible(a, b) 1 +static struct vio_bus_ops vio_bus_ops; -#endif - -/* convert from struct device to struct vio_dev and pass to driver. +/* + * Convert from struct device to struct vio_dev and pass to driver. * dev->driver has already been set by generic code because vio_bus_match - * succeeded. */ + * succeeded. + */ static int vio_bus_probe(struct device *dev) { struct vio_dev *viodev = to_vio_dev(dev); @@ -76,15 +46,12 @@ static int vio_bus_probe(struct device *dev) const struct vio_device_id *id; int error = -ENODEV; - DBGENTER(); - if (!viodrv->probe) return error; id = vio_match_device(viodrv->id_table, viodev); - if (id) { + if (id) error = viodrv->probe(viodev, id); - } return error; } @@ -95,11 +62,8 @@ static int vio_bus_remove(struct device *dev) struct vio_dev *viodev = to_vio_dev(dev); struct vio_driver *viodrv = to_vio_driver(dev->driver); - DBGENTER(); - - if (viodrv->remove) { + if (viodrv->remove) return viodrv->remove(viodev); - } /* driver can't remove */ return 1; @@ -135,193 +99,72 @@ void vio_unregister_driver(struct vio_driver *viodrv) EXPORT_SYMBOL(vio_unregister_driver); /** - * vio_match_device: - Tell if a VIO device has a matching VIO device id structure. - * @ids: array of VIO device id structures to search in - * @dev: the VIO device structure to match against + * vio_match_device: - Tell if a VIO device has a matching + * VIO device id structure. + * @ids: array of VIO device id structures to search in + * @dev: the VIO device structure to match against * * Used by a driver to check whether a VIO device present in the * system is in its list of supported devices. Returns the matching * vio_device_id structure or NULL if there is no match. */ -static const struct vio_device_id * vio_match_device(const struct vio_device_id *ids, - const struct vio_dev *dev) +static const struct vio_device_id *vio_match_device( + const struct vio_device_id *ids, const struct vio_dev *dev) { - DBGENTER(); - - while (ids->type) { - if ((strncmp(dev->type, ids->type, strlen(ids->type)) == 0) && - device_is_compatible(dev->dev.platform_data, ids->compat)) + while (ids->type[0] != '\0') { + if (vio_bus_ops.match(ids, dev)) return ids; ids++; } return NULL; } -#ifdef CONFIG_PPC_ISERIES -void __init iommu_vio_init(void) -{ - struct iommu_table *t; - struct iommu_table_cb cb; - unsigned long cbp; - unsigned long itc_entries; - - cb.itc_busno = 255; /* Bus 255 is the virtual bus */ - cb.itc_virtbus = 0xff; /* Ask for virtual bus */ - - cbp = virt_to_abs(&cb); - HvCallXm_getTceTableParms(cbp); - - itc_entries = cb.itc_size * PAGE_SIZE / sizeof(union tce_entry); - veth_iommu_table.it_size = itc_entries / 2; - veth_iommu_table.it_busno = cb.itc_busno; - veth_iommu_table.it_offset = cb.itc_offset; - veth_iommu_table.it_index = cb.itc_index; - veth_iommu_table.it_type = TCE_VB; - veth_iommu_table.it_blocksize = 1; - - t = iommu_init_table(&veth_iommu_table); - - if (!t) - printk("Virtual Bus VETH TCE table failed.\n"); - - vio_iommu_table.it_size = itc_entries - veth_iommu_table.it_size; - vio_iommu_table.it_busno = cb.itc_busno; - vio_iommu_table.it_offset = cb.itc_offset + - veth_iommu_table.it_size; - vio_iommu_table.it_index = cb.itc_index; - vio_iommu_table.it_type = TCE_VB; - vio_iommu_table.it_blocksize = 1; - - t = iommu_init_table(&vio_iommu_table); - - if (!t) - printk("Virtual Bus VIO TCE table failed.\n"); -} -#endif - -#ifdef CONFIG_PPC_PSERIES -static void probe_bus_pseries(void) -{ - struct device_node *node_vroot, *of_node; - - node_vroot = find_devices("vdevice"); - if ((node_vroot == NULL) || (node_vroot->child == NULL)) - /* this machine doesn't do virtual IO, and that's ok */ - return; - - vio_num_address_cells = prom_n_addr_cells(node_vroot->child); - - /* - * Create struct vio_devices for each virtual device in the device tree. - * Drivers will associate with them later. - */ - for (of_node = node_vroot->child; of_node != NULL; - of_node = of_node->sibling) { - printk(KERN_DEBUG "%s: processing %p\n", __FUNCTION__, of_node); - vio_register_device_node(of_node); - } -} -#endif - -#ifdef CONFIG_PPC_ISERIES -static void probe_bus_iseries(void) -{ - HvLpIndexMap vlan_map = HvLpConfig_getVirtualLanIndexMap(); - struct vio_dev *viodev; - int i; - - /* there is only one of each of these */ - vio_register_device_iseries("viocons", 0); - vio_register_device_iseries("vscsi", 0); - - vlan_map = HvLpConfig_getVirtualLanIndexMap(); - for (i = 0; i < HVMAXARCHITECTEDVIRTUALLANS; i++) { - if ((vlan_map & (0x8000 >> i)) == 0) - continue; - viodev = vio_register_device_iseries("vlan", i); - /* veth is special and has it own iommu_table */ - viodev->iommu_table = &veth_iommu_table; - } - for (i = 0; i < HVMAXARCHITECTEDVIRTUALDISKS; i++) - vio_register_device_iseries("viodasd", i); - for (i = 0; i < HVMAXARCHITECTEDVIRTUALCDROMS; i++) - vio_register_device_iseries("viocd", i); - for (i = 0; i < HVMAXARCHITECTEDVIRTUALTAPES; i++) - vio_register_device_iseries("viotape", i); -} -#endif - /** * vio_bus_init: - Initialize the virtual IO bus */ -static int __init vio_bus_init(void) +int __init vio_bus_init(struct vio_bus_ops *ops) { int err; + vio_bus_ops = *ops; + err = bus_register(&vio_bus_type); if (err) { printk(KERN_ERR "failed to register VIO bus\n"); return err; } - /* the fake parent of all vio devices, just to give us a nice directory */ + /* + * The fake parent of all vio devices, just to give us + * a nice directory + */ err = device_register(&vio_bus_device.dev); if (err) { - printk(KERN_WARNING "%s: device_register returned %i\n", __FUNCTION__, - err); + printk(KERN_WARNING "%s: device_register returned %i\n", + __FUNCTION__, err); return err; } -#ifdef CONFIG_PPC_PSERIES - probe_bus_pseries(); -#endif -#ifdef CONFIG_PPC_ISERIES - probe_bus_iseries(); -#endif - return 0; } -__initcall(vio_bus_init); - /* vio_dev refcount hit 0 */ static void __devinit vio_dev_release(struct device *dev) { - DBGENTER(); - -#ifdef CONFIG_PPC_PSERIES - /* XXX free TCE table */ - of_node_put(dev->platform_data); -#endif + if (vio_bus_ops.release_device) + vio_bus_ops.release_device(dev); kfree(to_vio_dev(dev)); } -#ifdef CONFIG_PPC_PSERIES -static ssize_t viodev_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct device_node *of_node = dev->platform_data; - - return sprintf(buf, "%s\n", of_node->full_name); -} -DEVICE_ATTR(devspec, S_IRUSR | S_IRGRP | S_IROTH, viodev_show_devspec, NULL); -#endif - -static ssize_t viodev_show_name(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t viodev_show_name(struct device *dev, + struct device_attribute *attr, char *buf) { return sprintf(buf, "%s\n", to_vio_dev(dev)->name); } DEVICE_ATTR(name, S_IRUSR | S_IRGRP | S_IROTH, viodev_show_name, NULL); -static struct vio_dev * __devinit vio_register_device_common( - struct vio_dev *viodev, char *name, char *type, - uint32_t unit_address, struct iommu_table *iommu_table) +struct vio_dev * __devinit vio_register_device(struct vio_dev *viodev) { - DBGENTER(); - - viodev->name = name; - viodev->type = type; - viodev->unit_address = unit_address; - viodev->iommu_table = iommu_table; /* init generic 'struct device' fields: */ viodev->dev.parent = &vio_bus_device.dev; viodev->dev.bus = &vio_bus_type; @@ -338,222 +181,15 @@ static struct vio_dev * __devinit vio_register_device_common( return viodev; } -#ifdef CONFIG_PPC_PSERIES -/** - * vio_register_device_node: - Register a new vio device. - * @of_node: The OF node for this device. - * - * Creates and initializes a vio_dev structure from the data in - * of_node (dev.platform_data) and adds it to the list of virtual devices. - * Returns a pointer to the created vio_dev or NULL if node has - * NULL device_type or compatible fields. - */ -struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node) -{ - struct vio_dev *viodev; - unsigned int *unit_address; - unsigned int *irq_p; - - DBGENTER(); - - /* we need the 'device_type' property, in order to match with drivers */ - if ((NULL == of_node->type)) { - printk(KERN_WARNING - "%s: node %s missing 'device_type'\n", __FUNCTION__, - of_node->name ? of_node->name : "<unknown>"); - return NULL; - } - - unit_address = (unsigned int *)get_property(of_node, "reg", NULL); - if (!unit_address) { - printk(KERN_WARNING "%s: node %s missing 'reg'\n", __FUNCTION__, - of_node->name ? of_node->name : "<unknown>"); - return NULL; - } - - /* allocate a vio_dev for this node */ - viodev = kmalloc(sizeof(struct vio_dev), GFP_KERNEL); - if (!viodev) { - return NULL; - } - memset(viodev, 0, sizeof(struct vio_dev)); - - viodev->dev.platform_data = of_node_get(of_node); - - viodev->irq = NO_IRQ; - irq_p = (unsigned int *)get_property(of_node, "interrupts", NULL); - if (irq_p) { - int virq = virt_irq_create_mapping(*irq_p); - if (virq == NO_IRQ) { - printk(KERN_ERR "Unable to allocate interrupt " - "number for %s\n", of_node->full_name); - } else - viodev->irq = irq_offset_up(virq); - } - - snprintf(viodev->dev.bus_id, BUS_ID_SIZE, "%x", *unit_address); - - /* register with generic device framework */ - if (vio_register_device_common(viodev, of_node->name, of_node->type, - *unit_address, vio_build_iommu_table(viodev)) - == NULL) { - /* XXX free TCE table */ - kfree(viodev); - return NULL; - } - device_create_file(&viodev->dev, &dev_attr_devspec); - - return viodev; -} -EXPORT_SYMBOL(vio_register_device_node); -#endif - -#ifdef CONFIG_PPC_ISERIES -/** - * vio_register_device: - Register a new vio device. - * @voidev: The device to register. - */ -static struct vio_dev *__init vio_register_device_iseries(char *type, - uint32_t unit_num) -{ - struct vio_dev *viodev; - - DBGENTER(); - - /* allocate a vio_dev for this node */ - viodev = kmalloc(sizeof(struct vio_dev), GFP_KERNEL); - if (!viodev) - return NULL; - memset(viodev, 0, sizeof(struct vio_dev)); - - snprintf(viodev->dev.bus_id, BUS_ID_SIZE, "%s%d", type, unit_num); - - return vio_register_device_common(viodev, viodev->dev.bus_id, type, - unit_num, &vio_iommu_table); -} -#endif - void __devinit vio_unregister_device(struct vio_dev *viodev) { - DBGENTER(); -#ifdef CONFIG_PPC_PSERIES - device_remove_file(&viodev->dev, &dev_attr_devspec); -#endif + if (vio_bus_ops.unregister_device) + vio_bus_ops.unregister_device(viodev); device_remove_file(&viodev->dev, &dev_attr_name); device_unregister(&viodev->dev); } EXPORT_SYMBOL(vio_unregister_device); -#ifdef CONFIG_PPC_PSERIES -/** - * vio_get_attribute: - get attribute for virtual device - * @vdev: The vio device to get property. - * @which: The property/attribute to be extracted. - * @length: Pointer to length of returned data size (unused if NULL). - * - * Calls prom.c's get_property() to return the value of the - * attribute specified by the preprocessor constant @which -*/ -const void * vio_get_attribute(struct vio_dev *vdev, void* which, int* length) -{ - return get_property(vdev->dev.platform_data, (char*)which, length); -} -EXPORT_SYMBOL(vio_get_attribute); - -/* vio_find_name() - internal because only vio.c knows how we formatted the - * kobject name - * XXX once vio_bus_type.devices is actually used as a kset in - * drivers/base/bus.c, this function should be removed in favor of - * "device_find(kobj_name, &vio_bus_type)" - */ -static struct vio_dev *vio_find_name(const char *kobj_name) -{ - struct kobject *found; - - found = kset_find_obj(&devices_subsys.kset, kobj_name); - if (!found) - return NULL; - - return to_vio_dev(container_of(found, struct device, kobj)); -} - -/** - * vio_find_node - find an already-registered vio_dev - * @vnode: device_node of the virtual device we're looking for - */ -struct vio_dev *vio_find_node(struct device_node *vnode) -{ - uint32_t *unit_address; - char kobj_name[BUS_ID_SIZE]; - - /* construct the kobject name from the device node */ - unit_address = (uint32_t *)get_property(vnode, "reg", NULL); - if (!unit_address) - return NULL; - snprintf(kobj_name, BUS_ID_SIZE, "%x", *unit_address); - - return vio_find_name(kobj_name); -} -EXPORT_SYMBOL(vio_find_node); - -/** - * vio_build_iommu_table: - gets the dma information from OF and builds the TCE tree. - * @dev: the virtual device. - * - * Returns a pointer to the built tce tree, or NULL if it can't - * find property. -*/ -static struct iommu_table * vio_build_iommu_table(struct vio_dev *dev) -{ - unsigned int *dma_window; - struct iommu_table *newTceTable; - unsigned long offset; - int dma_window_property_size; - - dma_window = (unsigned int *) get_property(dev->dev.platform_data, "ibm,my-dma-window", &dma_window_property_size); - if(!dma_window) { - return NULL; - } - - newTceTable = (struct iommu_table *) kmalloc(sizeof(struct iommu_table), GFP_KERNEL); - - /* There should be some code to extract the phys-encoded offset - using prom_n_addr_cells(). However, according to a comment - on earlier versions, it's always zero, so we don't bother */ - offset = dma_window[1] >> PAGE_SHIFT; - - /* TCE table size - measured in tce entries */ - newTceTable->it_size = dma_window[4] >> PAGE_SHIFT; - /* offset for VIO should always be 0 */ - newTceTable->it_offset = offset; - newTceTable->it_busno = 0; - newTceTable->it_index = (unsigned long)dma_window[0]; - newTceTable->it_type = TCE_VB; - - return iommu_init_table(newTceTable); -} - -int vio_enable_interrupts(struct vio_dev *dev) -{ - int rc = h_vio_signal(dev->unit_address, VIO_IRQ_ENABLE); - if (rc != H_Success) { - printk(KERN_ERR "vio: Error 0x%x enabling interrupts\n", rc); - } - return rc; -} -EXPORT_SYMBOL(vio_enable_interrupts); - -int vio_disable_interrupts(struct vio_dev *dev) -{ - int rc = h_vio_signal(dev->unit_address, VIO_IRQ_DISABLE); - if (rc != H_Success) { - printk(KERN_ERR "vio: Error 0x%x disabling interrupts\n", rc); - } - return rc; -} -EXPORT_SYMBOL(vio_disable_interrupts); -#endif - static dma_addr_t vio_map_single(struct device *dev, void *vaddr, size_t size, enum dma_data_direction direction) { @@ -615,18 +251,8 @@ static int vio_bus_match(struct device *dev, struct device_driver *drv) const struct vio_dev *vio_dev = to_vio_dev(dev); struct vio_driver *vio_drv = to_vio_driver(drv); const struct vio_device_id *ids = vio_drv->id_table; - const struct vio_device_id *found_id; - - DBGENTER(); - if (!ids) - return 0; - - found_id = vio_match_device(ids, vio_dev); - if (found_id) - return 1; - - return 0; + return (ids != NULL) && (vio_match_device(ids, vio_dev) != NULL); } struct bus_type vio_bus_type = { diff --git a/arch/ppc64/kernel/vmlinux.lds.S b/arch/ppc64/kernel/vmlinux.lds.S index 4103cc13f8d6..0306510bc4ff 100644 --- a/arch/ppc64/kernel/vmlinux.lds.S +++ b/arch/ppc64/kernel/vmlinux.lds.S @@ -15,6 +15,7 @@ SECTIONS *(.text .text.*) SCHED_TEXT LOCK_TEXT + KPROBES_TEXT *(.fixup) . = ALIGN(4096); _etext = .; diff --git a/arch/ppc64/kernel/xics.c b/arch/ppc64/kernel/xics.c index d9dc6f28d050..daf93885dcfa 100644 --- a/arch/ppc64/kernel/xics.c +++ b/arch/ppc64/kernel/xics.c @@ -38,7 +38,7 @@ static void xics_mask_and_ack_irq(unsigned int irq); static void xics_end_irq(unsigned int irq); static void xics_set_affinity(unsigned int irq_nr, cpumask_t cpumask); -struct hw_interrupt_type xics_pic = { +static struct hw_interrupt_type xics_pic = { .typename = " XICS ", .startup = xics_startup, .enable = xics_enable_irq, @@ -48,7 +48,7 @@ struct hw_interrupt_type xics_pic = { .set_affinity = xics_set_affinity }; -struct hw_interrupt_type xics_8259_pic = { +static struct hw_interrupt_type xics_8259_pic = { .typename = " XICS/8259", .ack = xics_mask_and_ack_irq, }; @@ -89,9 +89,8 @@ static struct xics_ipl __iomem *xics_per_cpu[NR_CPUS]; static int xics_irq_8259_cascade = 0; static int xics_irq_8259_cascade_real = 0; static unsigned int default_server = 0xFF; -/* also referenced in smp.c... */ -unsigned int default_distrib_server = 0; -unsigned int interrupt_server_size = 8; +static unsigned int default_distrib_server = 0; +static unsigned int interrupt_server_size = 8; /* * XICS only has a single IPI, so encode the messages per CPU @@ -99,10 +98,10 @@ unsigned int interrupt_server_size = 8; struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned; /* RTAS service tokens */ -int ibm_get_xive; -int ibm_set_xive; -int ibm_int_on; -int ibm_int_off; +static int ibm_get_xive; +static int ibm_set_xive; +static int ibm_int_on; +static int ibm_int_off; typedef struct { int (*xirr_info_get)(int cpu); @@ -284,16 +283,17 @@ static void xics_enable_irq(unsigned int virq) call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server, DEFAULT_PRIORITY); if (call_status != 0) { - printk(KERN_ERR "xics_enable_irq: irq=%d: ibm_set_xive " - "returned %x\n", irq, call_status); + printk(KERN_ERR "xics_enable_irq: irq=%u: ibm_set_xive " + "returned %d\n", irq, call_status); + printk("set_xive %x, server %x\n", ibm_set_xive, server); return; } /* Now unmask the interrupt (often a no-op) */ call_status = rtas_call(ibm_int_on, 1, 1, NULL, irq); if (call_status != 0) { - printk(KERN_ERR "xics_enable_irq: irq=%d: ibm_int_on " - "returned %x\n", irq, call_status); + printk(KERN_ERR "xics_enable_irq: irq=%u: ibm_int_on " + "returned %d\n", irq, call_status); return; } } @@ -308,8 +308,8 @@ static void xics_disable_real_irq(unsigned int irq) call_status = rtas_call(ibm_int_off, 1, 1, NULL, irq); if (call_status != 0) { - printk(KERN_ERR "xics_disable_real_irq: irq=%d: " - "ibm_int_off returned %x\n", irq, call_status); + printk(KERN_ERR "xics_disable_real_irq: irq=%u: " + "ibm_int_off returned %d\n", irq, call_status); return; } @@ -317,8 +317,8 @@ static void xics_disable_real_irq(unsigned int irq) /* Have to set XIVE to 0xff to be able to remove a slot */ call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server, 0xff); if (call_status != 0) { - printk(KERN_ERR "xics_disable_irq: irq=%d: ibm_set_xive(0xff)" - " returned %x\n", irq, call_status); + printk(KERN_ERR "xics_disable_irq: irq=%u: ibm_set_xive(0xff)" + " returned %d\n", irq, call_status); return; } } @@ -380,7 +380,7 @@ int xics_get_irq(struct pt_regs *regs) if (irq == NO_IRQ) irq = real_irq_to_virt_slowpath(vec); if (irq == NO_IRQ) { - printk(KERN_ERR "Interrupt %d (real) is invalid," + printk(KERN_ERR "Interrupt %u (real) is invalid," " disabling it.\n", vec); xics_disable_real_irq(vec); } else @@ -622,7 +622,7 @@ static void xics_set_affinity(unsigned int virq, cpumask_t cpumask) status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq); if (status) { - printk(KERN_ERR "xics_set_affinity: irq=%d ibm,get-xive " + printk(KERN_ERR "xics_set_affinity: irq=%u ibm,get-xive " "returns %d\n", irq, status); return; } @@ -641,7 +641,7 @@ static void xics_set_affinity(unsigned int virq, cpumask_t cpumask) irq, newmask, xics_status[1]); if (status) { - printk(KERN_ERR "xics_set_affinity: irq=%d ibm,set-xive " + printk(KERN_ERR "xics_set_affinity: irq=%u ibm,set-xive " "returns %d\n", irq, status); return; } @@ -720,7 +720,7 @@ void xics_migrate_irqs_away(void) status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq); if (status) { - printk(KERN_ERR "migrate_irqs_away: irq=%d " + printk(KERN_ERR "migrate_irqs_away: irq=%u " "ibm,get-xive returns %d\n", virq, status); goto unlock; @@ -734,7 +734,7 @@ void xics_migrate_irqs_away(void) if (xics_status[0] != get_hard_smp_processor_id(cpu)) goto unlock; - printk(KERN_WARNING "IRQ %d affinity broken off cpu %u\n", + printk(KERN_WARNING "IRQ %u affinity broken off cpu %u\n", virq, cpu); /* Reset affinity to all cpus */ diff --git a/arch/ppc64/lib/dec_and_lock.c b/arch/ppc64/lib/dec_and_lock.c index 6e8d8591708c..7b9d4da5cf92 100644 --- a/arch/ppc64/lib/dec_and_lock.c +++ b/arch/ppc64/lib/dec_and_lock.c @@ -20,14 +20,7 @@ * has a cmpxchg, and where atomic->value is an int holding * the value of the atomic (i.e. the high bits aren't used * for a lock or anything like that). - * - * N.B. ATOMIC_DEC_AND_LOCK gets defined in include/linux/spinlock.h - * if spinlocks are empty and thus atomic_dec_and_lock is defined - * to be atomic_dec_and_test - in that case we don't need it - * defined here as well. */ - -#ifndef ATOMIC_DEC_AND_LOCK int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock) { int counter; @@ -52,4 +45,3 @@ int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock) } EXPORT_SYMBOL(_atomic_dec_and_lock); -#endif /* ATOMIC_DEC_AND_LOCK */ diff --git a/arch/ppc64/lib/locks.c b/arch/ppc64/lib/locks.c index ef70ef91abe2..033643ab69e0 100644 --- a/arch/ppc64/lib/locks.c +++ b/arch/ppc64/lib/locks.c @@ -23,12 +23,12 @@ /* waiting for a spinlock... */ #if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES) -void __spin_yield(spinlock_t *lock) +void __spin_yield(raw_spinlock_t *lock) { unsigned int lock_value, holder_cpu, yield_count; struct paca_struct *holder_paca; - lock_value = lock->lock; + lock_value = lock->slock; if (lock_value == 0) return; holder_cpu = lock_value & 0xffff; @@ -38,7 +38,7 @@ void __spin_yield(spinlock_t *lock) if ((yield_count & 1) == 0) return; /* virtual cpu is currently running */ rmb(); - if (lock->lock != lock_value) + if (lock->slock != lock_value) return; /* something has changed */ #ifdef CONFIG_PPC_ISERIES HvCall2(HvCallBaseYieldProcessor, HvCall_YieldToProc, @@ -54,7 +54,7 @@ void __spin_yield(spinlock_t *lock) * This turns out to be the same for read and write locks, since * we only know the holder if it is write-locked. */ -void __rw_yield(rwlock_t *rw) +void __rw_yield(raw_rwlock_t *rw) { int lock_value; unsigned int holder_cpu, yield_count; @@ -82,9 +82,9 @@ void __rw_yield(rwlock_t *rw) } #endif -void spin_unlock_wait(spinlock_t *lock) +void __raw_spin_unlock_wait(raw_spinlock_t *lock) { - while (lock->lock) { + while (lock->slock) { HMT_low(); if (SHARED_PROCESSOR) __spin_yield(lock); @@ -92,4 +92,4 @@ void spin_unlock_wait(spinlock_t *lock) HMT_medium(); } -EXPORT_SYMBOL(spin_unlock_wait); +EXPORT_SYMBOL(__raw_spin_unlock_wait); diff --git a/arch/ppc64/mm/fault.c b/arch/ppc64/mm/fault.c index 20b0f37e8bf8..7fbc68bbb739 100644 --- a/arch/ppc64/mm/fault.c +++ b/arch/ppc64/mm/fault.c @@ -29,6 +29,7 @@ #include <linux/interrupt.h> #include <linux/smp_lock.h> #include <linux/module.h> +#include <linux/kprobes.h> #include <asm/page.h> #include <asm/pgtable.h> @@ -76,6 +77,28 @@ static int store_updates_sp(struct pt_regs *regs) return 0; } +static void do_dabr(struct pt_regs *regs, unsigned long error_code) +{ + siginfo_t info; + + if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code, + 11, SIGSEGV) == NOTIFY_STOP) + return; + + if (debugger_dabr_match(regs)) + return; + + /* Clear the DABR */ + set_dabr(0); + + /* Deliver the signal to userspace */ + info.si_signo = SIGTRAP; + info.si_errno = 0; + info.si_code = TRAP_HWBKPT; + info.si_addr = (void __user *)regs->nip; + force_sig_info(SIGTRAP, &info, current); +} + /* * The error_code parameter is * - DSISR for a non-SLB data access fault, @@ -84,8 +107,8 @@ static int store_updates_sp(struct pt_regs *regs) * The return value is 0 if the fault was handled, or the signal * number if this is a kernel fault that can't be handled here. */ -int do_page_fault(struct pt_regs *regs, unsigned long address, - unsigned long error_code) +int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, + unsigned long error_code) { struct vm_area_struct * vma; struct mm_struct *mm = current->mm; @@ -110,12 +133,9 @@ int do_page_fault(struct pt_regs *regs, unsigned long address, if (!user_mode(regs) && (address >= TASK_SIZE)) return SIGSEGV; - if (error_code & DSISR_DABRMATCH) { - if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code, - 11, SIGSEGV) == NOTIFY_STOP) - return 0; - if (debugger_dabr_match(regs)) - return 0; + if (error_code & DSISR_DABRMATCH) { + do_dabr(regs, error_code); + return 0; } if (in_atomic() || mm == NULL) { diff --git a/arch/ppc64/mm/hash_low.S b/arch/ppc64/mm/hash_low.S index fbff24827ae7..ee5a5d36bfa8 100644 --- a/arch/ppc64/mm/hash_low.S +++ b/arch/ppc64/mm/hash_low.S @@ -16,7 +16,7 @@ #include <asm/page.h> #include <asm/types.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/cputable.h> .text @@ -129,12 +129,10 @@ _GLOBAL(__hash_page) * code rather than call a C function...) */ BEGIN_FTR_SECTION -BEGIN_FTR_SECTION mr r4,r30 mr r5,r7 bl .hash_page_do_lazy_icache -END_FTR_SECTION_IFSET(CPU_FTR_NOEXECUTE) -END_FTR_SECTION_IFCLR(CPU_FTR_COHERENT_ICACHE) +END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE) /* At this point, r3 contains new PP bits, save them in * place of "access" in the param area (sic) diff --git a/arch/ppc64/mm/hash_native.c b/arch/ppc64/mm/hash_native.c index a6abd3a979bf..7626bb59954d 100644 --- a/arch/ppc64/mm/hash_native.c +++ b/arch/ppc64/mm/hash_native.c @@ -51,7 +51,6 @@ long native_hpte_insert(unsigned long hpte_group, unsigned long va, unsigned long prpn, unsigned long vflags, unsigned long rflags) { - unsigned long arpn = physRpn_to_absRpn(prpn); hpte_t *hptep = htab_address + hpte_group; unsigned long hpte_v, hpte_r; int i; @@ -74,7 +73,7 @@ long native_hpte_insert(unsigned long hpte_group, unsigned long va, hpte_v = (va >> 23) << HPTE_V_AVPN_SHIFT | vflags | HPTE_V_VALID; if (vflags & HPTE_V_LARGE) va &= ~(1UL << HPTE_V_AVPN_SHIFT); - hpte_r = (arpn << HPTE_R_RPN_SHIFT) | rflags; + hpte_r = (prpn << HPTE_R_RPN_SHIFT) | rflags; hptep->r = hpte_r; /* Guarantee the second dword is visible before the valid bit */ diff --git a/arch/ppc64/mm/hash_utils.c b/arch/ppc64/mm/hash_utils.c index 623b5d130c31..09475c8edf7c 100644 --- a/arch/ppc64/mm/hash_utils.c +++ b/arch/ppc64/mm/hash_utils.c @@ -210,7 +210,7 @@ void __init htab_initialize(void) /* create bolted the linear mapping in the hash table */ for (i=0; i < lmb.memory.cnt; i++) { - base = lmb.memory.region[i].physbase + KERNELBASE; + base = lmb.memory.region[i].base + KERNELBASE; size = lmb.memory.region[i].size; DBG("creating mapping for region: %lx : %lx\n", base, size); @@ -302,7 +302,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) int local = 0; cpumask_t tmp; - if ((ea & ~REGION_MASK) > EADDR_MASK) + if ((ea & ~REGION_MASK) >= PGTABLE_RANGE) return 1; switch (REGION_ID(ea)) { diff --git a/arch/ppc64/mm/hugetlbpage.c b/arch/ppc64/mm/hugetlbpage.c index f9524602818d..338771ec70d7 100644 --- a/arch/ppc64/mm/hugetlbpage.c +++ b/arch/ppc64/mm/hugetlbpage.c @@ -27,124 +27,94 @@ #include <linux/sysctl.h> -#define HUGEPGDIR_SHIFT (HPAGE_SHIFT + PAGE_SHIFT - 3) -#define HUGEPGDIR_SIZE (1UL << HUGEPGDIR_SHIFT) -#define HUGEPGDIR_MASK (~(HUGEPGDIR_SIZE-1)) +#define NUM_LOW_AREAS (0x100000000UL >> SID_SHIFT) +#define NUM_HIGH_AREAS (PGTABLE_RANGE >> HTLB_AREA_SHIFT) -#define HUGEPTE_INDEX_SIZE 9 -#define HUGEPGD_INDEX_SIZE 10 - -#define PTRS_PER_HUGEPTE (1 << HUGEPTE_INDEX_SIZE) -#define PTRS_PER_HUGEPGD (1 << HUGEPGD_INDEX_SIZE) - -static inline int hugepgd_index(unsigned long addr) -{ - return (addr & ~REGION_MASK) >> HUGEPGDIR_SHIFT; -} - -static pud_t *hugepgd_offset(struct mm_struct *mm, unsigned long addr) +/* Modelled after find_linux_pte() */ +pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) { - int index; + pgd_t *pg; + pud_t *pu; + pmd_t *pm; + pte_t *pt; - if (! mm->context.huge_pgdir) - return NULL; + BUG_ON(! in_hugepage_area(mm->context, addr)); + addr &= HPAGE_MASK; + + pg = pgd_offset(mm, addr); + if (!pgd_none(*pg)) { + pu = pud_offset(pg, addr); + if (!pud_none(*pu)) { + pm = pmd_offset(pu, addr); + pt = (pte_t *)pm; + BUG_ON(!pmd_none(*pm) + && !(pte_present(*pt) && pte_huge(*pt))); + return pt; + } + } - index = hugepgd_index(addr); - BUG_ON(index >= PTRS_PER_HUGEPGD); - return (pud_t *)(mm->context.huge_pgdir + index); + return NULL; } -static inline pte_t *hugepte_offset(pud_t *dir, unsigned long addr) +pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) { - int index; - - if (pud_none(*dir)) - return NULL; + pgd_t *pg; + pud_t *pu; + pmd_t *pm; + pte_t *pt; - index = (addr >> HPAGE_SHIFT) % PTRS_PER_HUGEPTE; - return (pte_t *)pud_page(*dir) + index; -} - -static pud_t *hugepgd_alloc(struct mm_struct *mm, unsigned long addr) -{ BUG_ON(! in_hugepage_area(mm->context, addr)); - if (! mm->context.huge_pgdir) { - pgd_t *new; - spin_unlock(&mm->page_table_lock); - /* Don't use pgd_alloc(), because we want __GFP_REPEAT */ - new = kmem_cache_alloc(zero_cache, GFP_KERNEL | __GFP_REPEAT); - BUG_ON(memcmp(new, empty_zero_page, PAGE_SIZE)); - spin_lock(&mm->page_table_lock); + addr &= HPAGE_MASK; - /* - * Because we dropped the lock, we should re-check the - * entry, as somebody else could have populated it.. - */ - if (mm->context.huge_pgdir) - pgd_free(new); - else - mm->context.huge_pgdir = new; - } - return hugepgd_offset(mm, addr); -} + pg = pgd_offset(mm, addr); + pu = pud_alloc(mm, pg, addr); -static pte_t *hugepte_alloc(struct mm_struct *mm, pud_t *dir, unsigned long addr) -{ - if (! pud_present(*dir)) { - pte_t *new; - - spin_unlock(&mm->page_table_lock); - new = kmem_cache_alloc(zero_cache, GFP_KERNEL | __GFP_REPEAT); - BUG_ON(memcmp(new, empty_zero_page, PAGE_SIZE)); - spin_lock(&mm->page_table_lock); - /* - * Because we dropped the lock, we should re-check the - * entry, as somebody else could have populated it.. - */ - if (pud_present(*dir)) { - if (new) - kmem_cache_free(zero_cache, new); - } else { - struct page *ptepage; - - if (! new) - return NULL; - ptepage = virt_to_page(new); - ptepage->mapping = (void *) mm; - ptepage->index = addr & HUGEPGDIR_MASK; - pud_populate(mm, dir, new); + if (pu) { + pm = pmd_alloc(mm, pu, addr); + if (pm) { + pt = (pte_t *)pm; + BUG_ON(!pmd_none(*pm) + && !(pte_present(*pt) && pte_huge(*pt))); + return pt; } } - return hugepte_offset(dir, addr); + return NULL; } -pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) -{ - pud_t *pud; +#define HUGEPTE_BATCH_SIZE (HPAGE_SIZE / PMD_SIZE) - BUG_ON(! in_hugepage_area(mm->context, addr)); +void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ + int i; - pud = hugepgd_offset(mm, addr); - if (! pud) - return NULL; + if (pte_present(*ptep)) { + pte_clear(mm, addr, ptep); + flush_tlb_pending(); + } - return hugepte_offset(pud, addr); + for (i = 0; i < HUGEPTE_BATCH_SIZE; i++) { + *ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); + ptep++; + } } -pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) +pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) { - pud_t *pud; + unsigned long old = pte_update(ptep, ~0UL); + int i; - BUG_ON(! in_hugepage_area(mm->context, addr)); + if (old & _PAGE_HASHPTE) + hpte_update(mm, addr, old, 0); - pud = hugepgd_alloc(mm, addr); - if (! pud) - return NULL; + for (i = 1; i < HUGEPTE_BATCH_SIZE; i++) + ptep[i] = __pte(0); - return hugepte_alloc(mm, pud, addr); + return __pte(old); } /* @@ -162,29 +132,53 @@ int is_aligned_hugepage_range(unsigned long addr, unsigned long len) return 0; } -static void flush_segments(void *parm) +static void flush_low_segments(void *parm) { - u16 segs = (unsigned long) parm; + u16 areas = (unsigned long) parm; unsigned long i; asm volatile("isync" : : : "memory"); - for (i = 0; i < 16; i++) { - if (! (segs & (1U << i))) + BUILD_BUG_ON((sizeof(areas)*8) != NUM_LOW_AREAS); + + for (i = 0; i < NUM_LOW_AREAS; i++) { + if (! (areas & (1U << i))) continue; - asm volatile("slbie %0" : : "r" (i << SID_SHIFT)); + asm volatile("slbie %0" + : : "r" ((i << SID_SHIFT) | SLBIE_C)); } asm volatile("isync" : : : "memory"); } -static int prepare_low_seg_for_htlb(struct mm_struct *mm, unsigned long seg) +static void flush_high_segments(void *parm) { - unsigned long start = seg << SID_SHIFT; - unsigned long end = (seg+1) << SID_SHIFT; + u16 areas = (unsigned long) parm; + unsigned long i, j; + + asm volatile("isync" : : : "memory"); + + BUILD_BUG_ON((sizeof(areas)*8) != NUM_HIGH_AREAS); + + for (i = 0; i < NUM_HIGH_AREAS; i++) { + if (! (areas & (1U << i))) + continue; + for (j = 0; j < (1UL << (HTLB_AREA_SHIFT-SID_SHIFT)); j++) + asm volatile("slbie %0" + :: "r" (((i << HTLB_AREA_SHIFT) + + (j << SID_SHIFT)) | SLBIE_C)); + } + + asm volatile("isync" : : : "memory"); +} + +static int prepare_low_area_for_htlb(struct mm_struct *mm, unsigned long area) +{ + unsigned long start = area << SID_SHIFT; + unsigned long end = (area+1) << SID_SHIFT; struct vm_area_struct *vma; - BUG_ON(seg >= 16); + BUG_ON(area >= NUM_LOW_AREAS); /* Check no VMAs are in the region */ vma = find_vma(mm, start); @@ -194,20 +188,39 @@ static int prepare_low_seg_for_htlb(struct mm_struct *mm, unsigned long seg) return 0; } -static int open_low_hpage_segs(struct mm_struct *mm, u16 newsegs) +static int prepare_high_area_for_htlb(struct mm_struct *mm, unsigned long area) +{ + unsigned long start = area << HTLB_AREA_SHIFT; + unsigned long end = (area+1) << HTLB_AREA_SHIFT; + struct vm_area_struct *vma; + + BUG_ON(area >= NUM_HIGH_AREAS); + + /* Check no VMAs are in the region */ + vma = find_vma(mm, start); + if (vma && (vma->vm_start < end)) + return -EBUSY; + + return 0; +} + +static int open_low_hpage_areas(struct mm_struct *mm, u16 newareas) { unsigned long i; - newsegs &= ~(mm->context.htlb_segs); - if (! newsegs) + BUILD_BUG_ON((sizeof(newareas)*8) != NUM_LOW_AREAS); + BUILD_BUG_ON((sizeof(mm->context.low_htlb_areas)*8) != NUM_LOW_AREAS); + + newareas &= ~(mm->context.low_htlb_areas); + if (! newareas) return 0; /* The segments we want are already open */ - for (i = 0; i < 16; i++) - if ((1 << i) & newsegs) - if (prepare_low_seg_for_htlb(mm, i) != 0) + for (i = 0; i < NUM_LOW_AREAS; i++) + if ((1 << i) & newareas) + if (prepare_low_area_for_htlb(mm, i) != 0) return -EBUSY; - mm->context.htlb_segs |= newsegs; + mm->context.low_htlb_areas |= newareas; /* update the paca copy of the context struct */ get_paca()->context = mm->context; @@ -215,29 +228,63 @@ static int open_low_hpage_segs(struct mm_struct *mm, u16 newsegs) /* the context change must make it to memory before the flush, * so that further SLB misses do the right thing. */ mb(); - on_each_cpu(flush_segments, (void *)(unsigned long)newsegs, 0, 1); + on_each_cpu(flush_low_segments, (void *)(unsigned long)newareas, 0, 1); + + return 0; +} + +static int open_high_hpage_areas(struct mm_struct *mm, u16 newareas) +{ + unsigned long i; + + BUILD_BUG_ON((sizeof(newareas)*8) != NUM_HIGH_AREAS); + BUILD_BUG_ON((sizeof(mm->context.high_htlb_areas)*8) + != NUM_HIGH_AREAS); + + newareas &= ~(mm->context.high_htlb_areas); + if (! newareas) + return 0; /* The areas we want are already open */ + + for (i = 0; i < NUM_HIGH_AREAS; i++) + if ((1 << i) & newareas) + if (prepare_high_area_for_htlb(mm, i) != 0) + return -EBUSY; + + mm->context.high_htlb_areas |= newareas; + + /* update the paca copy of the context struct */ + get_paca()->context = mm->context; + + /* the context change must make it to memory before the flush, + * so that further SLB misses do the right thing. */ + mb(); + on_each_cpu(flush_high_segments, (void *)(unsigned long)newareas, 0, 1); return 0; } int prepare_hugepage_range(unsigned long addr, unsigned long len) { - if (within_hugepage_high_range(addr, len)) - return 0; - else if ((addr < 0x100000000UL) && ((addr+len) < 0x100000000UL)) { - int err; - /* Yes, we need both tests, in case addr+len overflows - * 64-bit arithmetic */ - err = open_low_hpage_segs(current->mm, + int err; + + if ( (addr+len) < addr ) + return -EINVAL; + + if ((addr + len) < 0x100000000UL) + err = open_low_hpage_areas(current->mm, LOW_ESID_MASK(addr, len)); - if (err) - printk(KERN_DEBUG "prepare_hugepage_range(%lx, %lx)" - " failed (segs: 0x%04hx)\n", addr, len, - LOW_ESID_MASK(addr, len)); + else + err = open_high_hpage_areas(current->mm, + HTLB_AREA_MASK(addr, len)); + if (err) { + printk(KERN_DEBUG "prepare_hugepage_range(%lx, %lx)" + " failed (lowmask: 0x%04hx, highmask: 0x%04hx)\n", + addr, len, + LOW_ESID_MASK(addr, len), HTLB_AREA_MASK(addr, len)); return err; } - return -EINVAL; + return 0; } struct page * @@ -309,8 +356,8 @@ full_search: vma = find_vma(mm, addr); continue; } - if (touches_hugepage_high_range(addr, len)) { - addr = TASK_HPAGE_END; + if (touches_hugepage_high_range(mm, addr, len)) { + addr = ALIGN(addr+1, 1UL<<HTLB_AREA_SHIFT); vma = find_vma(mm, addr); continue; } @@ -389,8 +436,9 @@ hugepage_recheck: if (touches_hugepage_low_range(mm, addr, len)) { addr = (addr & ((~0) << SID_SHIFT)) - len; goto hugepage_recheck; - } else if (touches_hugepage_high_range(addr, len)) { - addr = TASK_HPAGE_BASE - len; + } else if (touches_hugepage_high_range(mm, addr, len)) { + addr = (addr & ((~0UL) << HTLB_AREA_SHIFT)) - len; + goto hugepage_recheck; } /* @@ -481,23 +529,28 @@ static unsigned long htlb_get_low_area(unsigned long len, u16 segmask) return -ENOMEM; } -static unsigned long htlb_get_high_area(unsigned long len) +static unsigned long htlb_get_high_area(unsigned long len, u16 areamask) { - unsigned long addr = TASK_HPAGE_BASE; + unsigned long addr = 0x100000000UL; struct vm_area_struct *vma; vma = find_vma(current->mm, addr); - for (vma = find_vma(current->mm, addr); - addr + len <= TASK_HPAGE_END; - vma = vma->vm_next) { + while (addr + len <= TASK_SIZE_USER64) { BUG_ON(vma && (addr >= vma->vm_end)); /* invariant */ - BUG_ON(! within_hugepage_high_range(addr, len)); + + if (! __within_hugepage_high_range(addr, len, areamask)) { + addr = ALIGN(addr+1, 1UL<<HTLB_AREA_SHIFT); + vma = find_vma(current->mm, addr); + continue; + } if (!vma || (addr + len) <= vma->vm_start) return addr; addr = ALIGN(vma->vm_end, HPAGE_SIZE); - /* Because we're in a hugepage region, this alignment - * should not skip us over any VMAs */ + /* Depending on segmask this might not be a confirmed + * hugepage region, so the ALIGN could have skipped + * some VMAs */ + vma = find_vma(current->mm, addr); } return -ENOMEM; @@ -507,6 +560,9 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags) { + int lastshift; + u16 areamask, curareas; + if (len & ~HPAGE_MASK) return -EINVAL; @@ -514,67 +570,49 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, return -EINVAL; if (test_thread_flag(TIF_32BIT)) { - int lastshift = 0; - u16 segmask, cursegs = current->mm->context.htlb_segs; + curareas = current->mm->context.low_htlb_areas; /* First see if we can do the mapping in the existing - * low hpage segments */ - addr = htlb_get_low_area(len, cursegs); + * low areas */ + addr = htlb_get_low_area(len, curareas); if (addr != -ENOMEM) return addr; - for (segmask = LOW_ESID_MASK(0x100000000UL-len, len); - ! lastshift; segmask >>=1) { - if (segmask & 1) + lastshift = 0; + for (areamask = LOW_ESID_MASK(0x100000000UL-len, len); + ! lastshift; areamask >>=1) { + if (areamask & 1) lastshift = 1; - addr = htlb_get_low_area(len, cursegs | segmask); + addr = htlb_get_low_area(len, curareas | areamask); if ((addr != -ENOMEM) - && open_low_hpage_segs(current->mm, segmask) == 0) + && open_low_hpage_areas(current->mm, areamask) == 0) return addr; } - printk(KERN_DEBUG "hugetlb_get_unmapped_area() unable to open" - " enough segments\n"); - return -ENOMEM; } else { - return htlb_get_high_area(len); - } -} - -void hugetlb_mm_free_pgd(struct mm_struct *mm) -{ - int i; - pgd_t *pgdir; - - spin_lock(&mm->page_table_lock); - - pgdir = mm->context.huge_pgdir; - if (! pgdir) - goto out; - - mm->context.huge_pgdir = NULL; + curareas = current->mm->context.high_htlb_areas; - /* cleanup any hugepte pages leftover */ - for (i = 0; i < PTRS_PER_HUGEPGD; i++) { - pud_t *pud = (pud_t *)(pgdir + i); - - if (! pud_none(*pud)) { - pte_t *pte = (pte_t *)pud_page(*pud); - struct page *ptepage = virt_to_page(pte); + /* First see if we can do the mapping in the existing + * high areas */ + addr = htlb_get_high_area(len, curareas); + if (addr != -ENOMEM) + return addr; - ptepage->mapping = NULL; + lastshift = 0; + for (areamask = HTLB_AREA_MASK(TASK_SIZE_USER64-len, len); + ! lastshift; areamask >>=1) { + if (areamask & 1) + lastshift = 1; - BUG_ON(memcmp(pte, empty_zero_page, PAGE_SIZE)); - kmem_cache_free(zero_cache, pte); + addr = htlb_get_high_area(len, curareas | areamask); + if ((addr != -ENOMEM) + && open_high_hpage_areas(current->mm, areamask) == 0) + return addr; } - pud_clear(pud); } - - BUG_ON(memcmp(pgdir, empty_zero_page, PAGE_SIZE)); - kmem_cache_free(zero_cache, pgdir); - - out: - spin_unlock(&mm->page_table_lock); + printk(KERN_DEBUG "hugetlb_get_unmapped_area() unable to open" + " enough areas\n"); + return -ENOMEM; } int hash_huge_page(struct mm_struct *mm, unsigned long access, diff --git a/arch/ppc64/mm/imalloc.c b/arch/ppc64/mm/imalloc.c index b6e75b891ac0..c65b87b92756 100644 --- a/arch/ppc64/mm/imalloc.c +++ b/arch/ppc64/mm/imalloc.c @@ -31,7 +31,7 @@ static int get_free_im_addr(unsigned long size, unsigned long *im_addr) break; if ((unsigned long)tmp->addr >= ioremap_bot) addr = tmp->size + (unsigned long) tmp->addr; - if (addr > IMALLOC_END-size) + if (addr >= IMALLOC_END-size) return 1; } *im_addr = addr; diff --git a/arch/ppc64/mm/init.c b/arch/ppc64/mm/init.c index e58a24d42879..c2157c9c3acb 100644 --- a/arch/ppc64/mm/init.c +++ b/arch/ppc64/mm/init.c @@ -42,7 +42,6 @@ #include <asm/pgalloc.h> #include <asm/page.h> -#include <asm/abs_addr.h> #include <asm/prom.h> #include <asm/lmb.h> #include <asm/rtas.h> @@ -66,6 +65,14 @@ #include <asm/vdso.h> #include <asm/imalloc.h> +#if PGTABLE_RANGE > USER_VSID_RANGE +#warning Limited user VSID range means pagetable space is wasted +#endif + +#if (TASK_SIZE_USER64 < PGTABLE_RANGE) && (TASK_SIZE_USER64 < USER_VSID_RANGE) +#warning TASK_SIZE is smaller than it needs to be. +#endif + int mem_init_done; unsigned long ioremap_bot = IMALLOC_BASE; static unsigned long phbs_io_bot = PHBS_IO_BASE; @@ -159,7 +166,6 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags) ptep = pte_alloc_kernel(&init_mm, pmdp, ea); if (!ptep) return -ENOMEM; - pa = abs_to_phys(pa); set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags))); spin_unlock(&init_mm.page_table_lock); @@ -226,7 +232,7 @@ void __iomem * __ioremap(unsigned long addr, unsigned long size, * Before that, we map using addresses going * up from ioremap_bot. imalloc will use * the addresses from ioremap_bot through - * IMALLOC_END (0xE000001fffffffff) + * IMALLOC_END * */ pa = addr & PAGE_MASK; @@ -386,6 +392,7 @@ void free_initmem(void) addr = (unsigned long)__init_begin; for (; addr < (unsigned long)__init_end; addr += PAGE_SIZE) { + memset((void *)addr, 0xcc, PAGE_SIZE); ClearPageReserved(virt_to_page(addr)); set_page_count(virt_to_page(addr), 1); free_page(addr); @@ -417,12 +424,6 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm) int index; int err; -#ifdef CONFIG_HUGETLB_PAGE - /* We leave htlb_segs as it was, but for a fork, we need to - * clear the huge_pgdir. */ - mm->context.huge_pgdir = NULL; -#endif - again: if (!idr_pre_get(&mmu_context_idr, GFP_KERNEL)) return -ENOMEM; @@ -453,8 +454,6 @@ void destroy_context(struct mm_struct *mm) spin_unlock(&mmu_context_lock); mm->context.id = NO_CONTEXT; - - hugetlb_mm_free_pgd(mm); } /* @@ -484,9 +483,9 @@ void __init mm_init_ppc64(void) for (i = 1; i < lmb.memory.cnt; i++) { unsigned long base, prevbase, prevsize; - prevbase = lmb.memory.region[i-1].physbase; + prevbase = lmb.memory.region[i-1].base; prevsize = lmb.memory.region[i-1].size; - base = lmb.memory.region[i].physbase; + base = lmb.memory.region[i].base; if (base > (prevbase + prevsize)) { io_hole_start = prevbase + prevsize; io_hole_size = base - (prevbase + prevsize); @@ -513,11 +512,8 @@ int page_is_ram(unsigned long pfn) for (i=0; i < lmb.memory.cnt; i++) { unsigned long base; -#ifdef CONFIG_MSCHUNKS - base = lmb.memory.region[i].physbase; -#else base = lmb.memory.region[i].base; -#endif + if ((paddr >= base) && (paddr < (base + lmb.memory.region[i].size))) { return 1; @@ -547,7 +543,7 @@ void __init do_init_bootmem(void) */ bootmap_pages = bootmem_bootmap_pages(total_pages); - start = abs_to_phys(lmb_alloc(bootmap_pages<<PAGE_SHIFT, PAGE_SIZE)); + start = lmb_alloc(bootmap_pages<<PAGE_SHIFT, PAGE_SIZE); BUG_ON(!start); boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages); @@ -557,27 +553,18 @@ void __init do_init_bootmem(void) /* Add all physical memory to the bootmem map, mark each area * present. */ - for (i=0; i < lmb.memory.cnt; i++) { - unsigned long physbase, size; - unsigned long start_pfn, end_pfn; - - physbase = lmb.memory.region[i].physbase; - size = lmb.memory.region[i].size; - - start_pfn = physbase >> PAGE_SHIFT; - end_pfn = start_pfn + (size >> PAGE_SHIFT); - memory_present(0, start_pfn, end_pfn); - - free_bootmem(physbase, size); - } + for (i=0; i < lmb.memory.cnt; i++) + free_bootmem(lmb.memory.region[i].base, + lmb_size_bytes(&lmb.memory, i)); /* reserve the sections we're already using */ - for (i=0; i < lmb.reserved.cnt; i++) { - unsigned long physbase = lmb.reserved.region[i].physbase; - unsigned long size = lmb.reserved.region[i].size; + for (i=0; i < lmb.reserved.cnt; i++) + reserve_bootmem(lmb.reserved.region[i].base, + lmb_size_bytes(&lmb.reserved, i)); - reserve_bootmem(physbase, size); - } + for (i=0; i < lmb.memory.cnt; i++) + memory_present(0, lmb_start_pfn(&lmb.memory, i), + lmb_end_pfn(&lmb.memory, i)); } /* @@ -615,10 +602,10 @@ static int __init setup_kcore(void) int i; for (i=0; i < lmb.memory.cnt; i++) { - unsigned long physbase, size; + unsigned long base, size; struct kcore_list *kcore_mem; - physbase = lmb.memory.region[i].physbase; + base = lmb.memory.region[i].base; size = lmb.memory.region[i].size; /* GFP_ATOMIC to avoid might_sleep warnings during boot */ @@ -626,7 +613,7 @@ static int __init setup_kcore(void) if (!kcore_mem) panic("mem_init: kmalloc failed\n"); - kclist_add(kcore_mem, __va(physbase), size); + kclist_add(kcore_mem, __va(base), size); } kclist_add(&kcore_vmem, (void *)VMALLOC_START, VMALLOC_END-VMALLOC_START); @@ -686,9 +673,6 @@ void __init mem_init(void) mem_init_done = 1; -#ifdef CONFIG_PPC_ISERIES - iommu_vio_init(); -#endif /* Initialize the vDSO */ vdso_init(); } @@ -833,23 +817,43 @@ void __iomem * reserve_phb_iospace(unsigned long size) return virt_addr; } -kmem_cache_t *zero_cache; - -static void zero_ctor(void *pte, kmem_cache_t *cache, unsigned long flags) +static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags) { - memset(pte, 0, PAGE_SIZE); + memset(addr, 0, kmem_cache_size(cache)); } +static const int pgtable_cache_size[2] = { + PTE_TABLE_SIZE, PMD_TABLE_SIZE +}; +static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = { + "pgd_pte_cache", "pud_pmd_cache", +}; + +kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)]; + void pgtable_cache_init(void) { - zero_cache = kmem_cache_create("zero", - PAGE_SIZE, - 0, - SLAB_HWCACHE_ALIGN | SLAB_MUST_HWCACHE_ALIGN, - zero_ctor, - NULL); - if (!zero_cache) - panic("pgtable_cache_init(): could not create zero_cache!\n"); + int i; + + BUILD_BUG_ON(PTE_TABLE_SIZE != pgtable_cache_size[PTE_CACHE_NUM]); + BUILD_BUG_ON(PMD_TABLE_SIZE != pgtable_cache_size[PMD_CACHE_NUM]); + BUILD_BUG_ON(PUD_TABLE_SIZE != pgtable_cache_size[PUD_CACHE_NUM]); + BUILD_BUG_ON(PGD_TABLE_SIZE != pgtable_cache_size[PGD_CACHE_NUM]); + + for (i = 0; i < ARRAY_SIZE(pgtable_cache_size); i++) { + int size = pgtable_cache_size[i]; + const char *name = pgtable_cache_name[i]; + + pgtable_cache[i] = kmem_cache_create(name, + size, size, + SLAB_HWCACHE_ALIGN + | SLAB_MUST_HWCACHE_ALIGN, + zero_ctor, + NULL); + if (! pgtable_cache[i]) + panic("pgtable_cache_init(): could not create %s!\n", + name); + } } pgprot_t phys_mem_access_prot(struct file *file, unsigned long addr, diff --git a/arch/ppc64/mm/numa.c b/arch/ppc64/mm/numa.c index 0b191f2de016..cb864b8f2750 100644 --- a/arch/ppc64/mm/numa.c +++ b/arch/ppc64/mm/numa.c @@ -440,8 +440,6 @@ new_range: for (i = start ; i < (start+size); i += MEMORY_INCREMENT) numa_memory_lookup_table[i >> MEMORY_INCREMENT_SHIFT] = numa_domain; - memory_present(numa_domain, start >> PAGE_SHIFT, - (start + size) >> PAGE_SHIFT); if (--ranges) goto new_range; @@ -483,7 +481,6 @@ static void __init setup_nonnuma(void) for (i = 0 ; i < top_of_ram; i += MEMORY_INCREMENT) numa_memory_lookup_table[i >> MEMORY_INCREMENT_SHIFT] = 0; - memory_present(0, 0, init_node_data[0].node_end_pfn); } static void __init dump_numa_topology(void) @@ -671,7 +668,7 @@ new_range: * Mark reserved regions on this node */ for (i = 0; i < lmb.reserved.cnt; i++) { - unsigned long physbase = lmb.reserved.region[i].physbase; + unsigned long physbase = lmb.reserved.region[i].base; unsigned long size = lmb.reserved.region[i].size; if (pa_to_nid(physbase) != nid && @@ -695,6 +692,46 @@ new_range: size); } } + /* + * This loop may look famaliar, but we have to do it again + * after marking our reserved memory to mark memory present + * for sparsemem. + */ + addr_cells = get_mem_addr_cells(); + size_cells = get_mem_size_cells(); + memory = NULL; + while ((memory = of_find_node_by_type(memory, "memory")) != NULL) { + unsigned long mem_start, mem_size; + int numa_domain, ranges; + unsigned int *memcell_buf; + unsigned int len; + + memcell_buf = (unsigned int *)get_property(memory, "reg", &len); + if (!memcell_buf || len <= 0) + continue; + + ranges = memory->n_addrs; /* ranges in cell */ +new_range2: + mem_start = read_n_cells(addr_cells, &memcell_buf); + mem_size = read_n_cells(size_cells, &memcell_buf); + if (numa_enabled) { + numa_domain = of_node_numa_domain(memory); + if (numa_domain >= MAX_NUMNODES) + numa_domain = 0; + } else + numa_domain = 0; + + if (numa_domain != nid) + continue; + + mem_size = numa_enforce_memory_limit(mem_start, mem_size); + memory_present(numa_domain, mem_start >> PAGE_SHIFT, + (mem_start + mem_size) >> PAGE_SHIFT); + + if (--ranges) /* process all ranges in cell */ + goto new_range2; + } + } } diff --git a/arch/ppc64/mm/slb.c b/arch/ppc64/mm/slb.c index 244150a0bc18..0473953f6a37 100644 --- a/arch/ppc64/mm/slb.c +++ b/arch/ppc64/mm/slb.c @@ -87,8 +87,8 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) int i; asm volatile("isync" : : : "memory"); for (i = 0; i < offset; i++) { - esid_data = (unsigned long)get_paca()->slb_cache[i] - << SID_SHIFT; + esid_data = ((unsigned long)get_paca()->slb_cache[i] + << SID_SHIFT) | SLBIE_C; asm volatile("slbie %0" : : "r" (esid_data)); } asm volatile("isync" : : : "memory"); diff --git a/arch/ppc64/mm/slb_low.S b/arch/ppc64/mm/slb_low.S index 8379d678f70f..a3a03da503bc 100644 --- a/arch/ppc64/mm/slb_low.S +++ b/arch/ppc64/mm/slb_low.S @@ -21,7 +21,7 @@ #include <asm/page.h> #include <asm/mmu.h> #include <asm/ppc_asm.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/cputable.h> /* void slb_allocate(unsigned long ea); @@ -89,32 +89,29 @@ END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE) b 9f 0: /* user address: proto-VSID = context<<15 | ESID */ - li r11,SLB_VSID_USER - - srdi. r9,r3,13 + srdi. r9,r3,USER_ESID_BITS bne- 8f /* invalid ea bits set */ #ifdef CONFIG_HUGETLB_PAGE BEGIN_FTR_SECTION - /* check against the hugepage ranges */ - cmpldi r3,(TASK_HPAGE_END>>SID_SHIFT) - bge 6f /* >= TASK_HPAGE_END */ - cmpldi r3,(TASK_HPAGE_BASE>>SID_SHIFT) - bge 5f /* TASK_HPAGE_BASE..TASK_HPAGE_END */ - cmpldi r3,16 - bge 6f /* 4GB..TASK_HPAGE_BASE */ - - lhz r9,PACAHTLBSEGS(r13) - srd r9,r9,r3 - andi. r9,r9,1 - beq 6f - -5: /* this is a hugepage user address */ - li r11,(SLB_VSID_USER|SLB_VSID_L) + lhz r9,PACAHIGHHTLBAREAS(r13) + srdi r11,r3,(HTLB_AREA_SHIFT-SID_SHIFT) + srd r9,r9,r11 + lhz r11,PACALOWHTLBAREAS(r13) + srd r11,r11,r3 + or r9,r9,r11 +END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE) +#endif /* CONFIG_HUGETLB_PAGE */ + + li r11,SLB_VSID_USER + +#ifdef CONFIG_HUGETLB_PAGE +BEGIN_FTR_SECTION + rldimi r11,r9,8,55 /* shift masked bit into SLB_VSID_L */ END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE) #endif /* CONFIG_HUGETLB_PAGE */ -6: ld r9,PACACONTEXTID(r13) + ld r9,PACACONTEXTID(r13) rldimi r3,r9,USER_ESID_BITS,0 9: /* r3 = protovsid, r11 = flags, r10 = esid_data, cr7 = <>KERNELBASE */ diff --git a/arch/ppc64/mm/tlb.c b/arch/ppc64/mm/tlb.c index 26f0172c4527..d8a6593a13f0 100644 --- a/arch/ppc64/mm/tlb.c +++ b/arch/ppc64/mm/tlb.c @@ -41,7 +41,58 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur); unsigned long pte_freelist_forced_free; -void __pte_free_tlb(struct mmu_gather *tlb, struct page *ptepage) +struct pte_freelist_batch +{ + struct rcu_head rcu; + unsigned int index; + pgtable_free_t tables[0]; +}; + +DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur); +unsigned long pte_freelist_forced_free; + +#define PTE_FREELIST_SIZE \ + ((PAGE_SIZE - sizeof(struct pte_freelist_batch)) \ + / sizeof(pgtable_free_t)) + +#ifdef CONFIG_SMP +static void pte_free_smp_sync(void *arg) +{ + /* Do nothing, just ensure we sync with all CPUs */ +} +#endif + +/* This is only called when we are critically out of memory + * (and fail to get a page in pte_free_tlb). + */ +static void pgtable_free_now(pgtable_free_t pgf) +{ + pte_freelist_forced_free++; + + smp_call_function(pte_free_smp_sync, NULL, 0, 1); + + pgtable_free(pgf); +} + +static void pte_free_rcu_callback(struct rcu_head *head) +{ + struct pte_freelist_batch *batch = + container_of(head, struct pte_freelist_batch, rcu); + unsigned int i; + + for (i = 0; i < batch->index; i++) + pgtable_free(batch->tables[i]); + + free_page((unsigned long)batch); +} + +static void pte_free_submit(struct pte_freelist_batch *batch) +{ + INIT_RCU_HEAD(&batch->rcu); + call_rcu(&batch->rcu, pte_free_rcu_callback); +} + +void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf) { /* This is safe as we are holding page_table_lock */ cpumask_t local_cpumask = cpumask_of_cpu(smp_processor_id()); @@ -49,19 +100,19 @@ void __pte_free_tlb(struct mmu_gather *tlb, struct page *ptepage) if (atomic_read(&tlb->mm->mm_users) < 2 || cpus_equal(tlb->mm->cpu_vm_mask, local_cpumask)) { - pte_free(ptepage); + pgtable_free(pgf); return; } if (*batchp == NULL) { *batchp = (struct pte_freelist_batch *)__get_free_page(GFP_ATOMIC); if (*batchp == NULL) { - pte_free_now(ptepage); + pgtable_free_now(pgf); return; } (*batchp)->index = 0; } - (*batchp)->pages[(*batchp)->index++] = ptepage; + (*batchp)->tables[(*batchp)->index++] = pgf; if ((*batchp)->index == PTE_FREELIST_SIZE) { pte_free_submit(*batchp); *batchp = NULL; @@ -132,42 +183,6 @@ void __flush_tlb_pending(struct ppc64_tlb_batch *batch) put_cpu(); } -#ifdef CONFIG_SMP -static void pte_free_smp_sync(void *arg) -{ - /* Do nothing, just ensure we sync with all CPUs */ -} -#endif - -/* This is only called when we are critically out of memory - * (and fail to get a page in pte_free_tlb). - */ -void pte_free_now(struct page *ptepage) -{ - pte_freelist_forced_free++; - - smp_call_function(pte_free_smp_sync, NULL, 0, 1); - - pte_free(ptepage); -} - -static void pte_free_rcu_callback(struct rcu_head *head) -{ - struct pte_freelist_batch *batch = - container_of(head, struct pte_freelist_batch, rcu); - unsigned int i; - - for (i = 0; i < batch->index; i++) - pte_free(batch->pages[i]); - free_page((unsigned long)batch); -} - -void pte_free_submit(struct pte_freelist_batch *batch) -{ - INIT_RCU_HEAD(&batch->rcu); - call_rcu(&batch->rcu, pte_free_rcu_callback); -} - void pte_free_finish(void) { /* This is safe as we are holding page_table_lock */ diff --git a/arch/ppc64/oprofile/common.c b/arch/ppc64/oprofile/common.c index b28bfda23d94..e5f572710aa0 100644 --- a/arch/ppc64/oprofile/common.c +++ b/arch/ppc64/oprofile/common.c @@ -16,11 +16,9 @@ #include <asm/ptrace.h> #include <asm/system.h> #include <asm/pmc.h> +#include <asm/cputable.h> +#include <asm/oprofile_impl.h> -#include "op_impl.h" - -extern struct op_ppc64_model op_model_rs64; -extern struct op_ppc64_model op_model_power4; static struct op_ppc64_model *model; static struct op_counter_config ctr[OP_MAX_COUNTER]; @@ -123,52 +121,13 @@ static int op_ppc64_create_files(struct super_block *sb, struct dentry *root) int __init oprofile_arch_init(struct oprofile_operations *ops) { - unsigned int pvr; - - pvr = mfspr(SPRN_PVR); - - switch (PVR_VER(pvr)) { - case PV_630: - case PV_630p: - model = &op_model_rs64; - model->num_counters = 8; - ops->cpu_type = "ppc64/power3"; - break; - - case PV_NORTHSTAR: - case PV_PULSAR: - case PV_ICESTAR: - case PV_SSTAR: - model = &op_model_rs64; - model->num_counters = 8; - ops->cpu_type = "ppc64/rs64"; - break; - - case PV_POWER4: - case PV_POWER4p: - model = &op_model_power4; - model->num_counters = 8; - ops->cpu_type = "ppc64/power4"; - break; - - case PV_970: - case PV_970FX: - model = &op_model_power4; - model->num_counters = 8; - ops->cpu_type = "ppc64/970"; - break; - - case PV_POWER5: - case PV_POWER5p: - model = &op_model_power4; - model->num_counters = 6; - ops->cpu_type = "ppc64/power5"; - break; - - default: - return -ENODEV; - } + if (!cur_cpu_spec->oprofile_model || !cur_cpu_spec->oprofile_cpu_type) + return -ENODEV; + + model = cur_cpu_spec->oprofile_model; + model->num_counters = cur_cpu_spec->num_pmcs; + ops->cpu_type = cur_cpu_spec->oprofile_cpu_type; ops->create_files = op_ppc64_create_files; ops->setup = op_ppc64_setup; ops->shutdown = op_ppc64_shutdown; diff --git a/arch/ppc64/oprofile/op_impl.h b/arch/ppc64/oprofile/op_impl.h deleted file mode 100644 index 7fa7eaabc035..000000000000 --- a/arch/ppc64/oprofile/op_impl.h +++ /dev/null @@ -1,108 +0,0 @@ -/* - * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM - * - * Based on alpha version. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef OP_IMPL_H -#define OP_IMPL_H 1 - -#define OP_MAX_COUNTER 8 - -/* Per-counter configuration as set via oprofilefs. */ -struct op_counter_config { - unsigned long valid; - unsigned long enabled; - unsigned long event; - unsigned long count; - unsigned long kernel; - /* We dont support per counter user/kernel selection */ - unsigned long user; - unsigned long unit_mask; -}; - -/* System-wide configuration as set via oprofilefs. */ -struct op_system_config { - unsigned long mmcr0; - unsigned long mmcr1; - unsigned long mmcra; - unsigned long enable_kernel; - unsigned long enable_user; - unsigned long backtrace_spinlocks; -}; - -/* Per-arch configuration */ -struct op_ppc64_model { - void (*reg_setup) (struct op_counter_config *, - struct op_system_config *, - int num_counters); - void (*cpu_setup) (void *); - void (*start) (struct op_counter_config *); - void (*stop) (void); - void (*handle_interrupt) (struct pt_regs *, - struct op_counter_config *); - int num_counters; -}; - -static inline unsigned int ctr_read(unsigned int i) -{ - switch(i) { - case 0: - return mfspr(SPRN_PMC1); - case 1: - return mfspr(SPRN_PMC2); - case 2: - return mfspr(SPRN_PMC3); - case 3: - return mfspr(SPRN_PMC4); - case 4: - return mfspr(SPRN_PMC5); - case 5: - return mfspr(SPRN_PMC6); - case 6: - return mfspr(SPRN_PMC7); - case 7: - return mfspr(SPRN_PMC8); - default: - return 0; - } -} - -static inline void ctr_write(unsigned int i, unsigned int val) -{ - switch(i) { - case 0: - mtspr(SPRN_PMC1, val); - break; - case 1: - mtspr(SPRN_PMC2, val); - break; - case 2: - mtspr(SPRN_PMC3, val); - break; - case 3: - mtspr(SPRN_PMC4, val); - break; - case 4: - mtspr(SPRN_PMC5, val); - break; - case 5: - mtspr(SPRN_PMC6, val); - break; - case 6: - mtspr(SPRN_PMC7, val); - break; - case 7: - mtspr(SPRN_PMC8, val); - break; - default: - break; - } -} - -#endif diff --git a/arch/ppc64/oprofile/op_model_power4.c b/arch/ppc64/oprofile/op_model_power4.c index 3d103d66870d..32b2bb5625fe 100644 --- a/arch/ppc64/oprofile/op_model_power4.c +++ b/arch/ppc64/oprofile/op_model_power4.c @@ -16,14 +16,12 @@ #include <asm/cputable.h> #include <asm/systemcfg.h> #include <asm/rtas.h> +#include <asm/oprofile_impl.h> #define dbg(args...) -#include "op_impl.h" - static unsigned long reset_value[OP_MAX_COUNTER]; -static int num_counters; static int oprofile_running; static int mmcra_has_sihv; @@ -45,8 +43,6 @@ static void power4_reg_setup(struct op_counter_config *ctr, { int i; - num_counters = num_ctrs; - /* * SIHV / SIPR bits are only implemented on POWER4+ (GQ) and above. * However we disable it on all POWER4 until we verify it works @@ -68,7 +64,7 @@ static void power4_reg_setup(struct op_counter_config *ctr, backtrace_spinlocks = sys->backtrace_spinlocks; - for (i = 0; i < num_counters; ++i) + for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) reset_value[i] = 0x80000000UL - ctr[i].count; /* setup user and kernel profiling */ @@ -121,7 +117,7 @@ static void power4_start(struct op_counter_config *ctr) /* set the PMM bit (see comment below) */ mtmsrd(mfmsr() | MSR_PMM); - for (i = 0; i < num_counters; ++i) { + for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) { if (ctr[i].enabled) { ctr_write(i, reset_value[i]); } else { @@ -272,7 +268,7 @@ static void power4_handle_interrupt(struct pt_regs *regs, /* set the PMM bit (see comment below) */ mtmsrd(mfmsr() | MSR_PMM); - for (i = 0; i < num_counters; ++i) { + for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) { val = ctr_read(i); if (val < 0) { if (oprofile_running && ctr[i].enabled) { diff --git a/arch/ppc64/oprofile/op_model_rs64.c b/arch/ppc64/oprofile/op_model_rs64.c index bcec506c266a..08c5b333f5c4 100644 --- a/arch/ppc64/oprofile/op_model_rs64.c +++ b/arch/ppc64/oprofile/op_model_rs64.c @@ -14,11 +14,10 @@ #include <asm/system.h> #include <asm/processor.h> #include <asm/cputable.h> +#include <asm/oprofile_impl.h> #define dbg(args...) -#include "op_impl.h" - static void ctrl_write(unsigned int i, unsigned int val) { unsigned int tmp = 0; diff --git a/arch/ppc64/xmon/privinst.h b/arch/ppc64/xmon/privinst.h index 183c3e400258..02eb40dac0b3 100644 --- a/arch/ppc64/xmon/privinst.h +++ b/arch/ppc64/xmon/privinst.h @@ -46,7 +46,6 @@ GSETSPR(287, pvr) GSETSPR(1008, hid0) GSETSPR(1009, hid1) GSETSPR(1010, iabr) -GSETSPR(1013, dabr) GSETSPR(1023, pir) static inline void store_inst(void *p) diff --git a/arch/ppc64/xmon/start.c b/arch/ppc64/xmon/start.c index a9265bcc79b2..e50c158191e1 100644 --- a/arch/ppc64/xmon/start.c +++ b/arch/ppc64/xmon/start.c @@ -27,7 +27,7 @@ static void sysrq_handle_xmon(int key, struct pt_regs *pt_regs, struct tty_struct *tty) { /* ensure xmon is enabled */ - xmon_init(); + xmon_init(1); debugger(pt_regs); } @@ -61,7 +61,9 @@ xmon_read(void *handle, void *ptr, int nb) int xmon_read_poll(void) { - return udbg_getc_poll(); + if (udbg_getc_poll) + return udbg_getc_poll(); + return -1; } FILE *xmon_stdin; diff --git a/arch/ppc64/xmon/xmon.c b/arch/ppc64/xmon/xmon.c index 05539439e6bc..74e63a886a69 100644 --- a/arch/ppc64/xmon/xmon.c +++ b/arch/ppc64/xmon/xmon.c @@ -586,6 +586,8 @@ int xmon_dabr_match(struct pt_regs *regs) { if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) != (MSR_IR|MSR_SF)) return 0; + if (dabr.enabled == 0) + return 0; xmon_core(regs, 0); return 1; } @@ -628,20 +630,6 @@ int xmon_fault_handler(struct pt_regs *regs) return 0; } -/* On systems with a hypervisor, we can't set the DABR - (data address breakpoint register) directly. */ -static void set_controlled_dabr(unsigned long val) -{ -#ifdef CONFIG_PPC_PSERIES - if (systemcfg->platform == PLATFORM_PSERIES_LPAR) { - int rc = plpar_hcall_norets(H_SET_DABR, val); - if (rc != H_Success) - xmon_printf("Warning: setting DABR failed (%d)\n", rc); - } else -#endif - set_dabr(val); -} - static struct bpt *at_breakpoint(unsigned long pc) { int i; @@ -728,7 +716,7 @@ static void insert_bpts(void) static void insert_cpu_bpts(void) { if (dabr.enabled) - set_controlled_dabr(dabr.address | (dabr.enabled & 7)); + set_dabr(dabr.address | (dabr.enabled & 7)); if (iabr && cpu_has_feature(CPU_FTR_IABR)) set_iabr(iabr->address | (iabr->enabled & (BP_IABR|BP_IABR_TE))); @@ -756,7 +744,7 @@ static void remove_bpts(void) static void remove_cpu_bpts(void) { - set_controlled_dabr(0); + set_dabr(0); if (cpu_has_feature(CPU_FTR_IABR)) set_iabr(0); } @@ -2496,15 +2484,25 @@ static void dump_stab(void) } } -void xmon_init(void) +void xmon_init(int enable) { - __debugger = xmon; - __debugger_ipi = xmon_ipi; - __debugger_bpt = xmon_bpt; - __debugger_sstep = xmon_sstep; - __debugger_iabr_match = xmon_iabr_match; - __debugger_dabr_match = xmon_dabr_match; - __debugger_fault_handler = xmon_fault_handler; + if (enable) { + __debugger = xmon; + __debugger_ipi = xmon_ipi; + __debugger_bpt = xmon_bpt; + __debugger_sstep = xmon_sstep; + __debugger_iabr_match = xmon_iabr_match; + __debugger_dabr_match = xmon_dabr_match; + __debugger_fault_handler = xmon_fault_handler; + } else { + __debugger = NULL; + __debugger_ipi = NULL; + __debugger_bpt = NULL; + __debugger_sstep = NULL; + __debugger_iabr_match = NULL; + __debugger_dabr_match = NULL; + __debugger_fault_handler = NULL; + } } void dump_segments(void) diff --git a/arch/s390/Makefile b/arch/s390/Makefile index 3cd8dd25c9d7..98db30481d97 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -19,6 +19,7 @@ CFLAGS += -m31 AFLAGS += -m31 UTS_MACHINE := s390 STACK_SIZE := 8192 +CHECKFLAGS += -D__s390__ endif ifdef CONFIG_ARCH_S390X @@ -28,6 +29,7 @@ CFLAGS += -m64 AFLAGS += -m64 UTS_MACHINE := s390x STACK_SIZE := 16384 +CHECKFLAGS += -D__s390__ -D__s390x__ endif cflags-$(CONFIG_MARCH_G5) += $(call cc-option,-march=g5) @@ -100,16 +102,6 @@ image: vmlinux archclean: $(Q)$(MAKE) $(clean)=$(boot) -prepare: include/asm-$(ARCH)/offsets.h - -arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \ - include/config/MARKER - -include/asm-$(ARCH)/offsets.h: arch/$(ARCH)/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) - -CLEAN_FILES += include/asm-$(ARCH)/offsets.h - # Don't use tabs in echo arguments define archhelp echo '* image - Kernel image for IPL ($(boot)/image)' diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index 18610cea03a2..ed877d0f27e6 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -678,7 +678,7 @@ asmlinkage long sys32_sendfile(int out_fd, int in_fd, compat_off_t *offset, size ret = sys_sendfile(out_fd, in_fd, offset ? &of : NULL, count); set_fs(old_fs); - if (!ret && offset && put_user(of, offset)) + if (offset && put_user(of, offset)) return -EFAULT; return ret; diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c index d05d65ac9694..7358cdb8441f 100644 --- a/arch/s390/kernel/compat_signal.c +++ b/arch/s390/kernel/compat_signal.c @@ -637,12 +637,11 @@ handle_signal32(unsigned long sig, struct k_sigaction *ka, else setup_frame32(sig, ka, oldset, regs); - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); } diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index 960ba6029c3a..bc59282da762 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -62,7 +62,7 @@ typedef struct } debug_sprintf_entry_t; -extern void tod_to_timeval(uint64_t todval, struct timeval *xtime); +extern void tod_to_timeval(uint64_t todval, struct timespec *xtime); /* internal function prototyes */ @@ -374,9 +374,24 @@ debug_info_copy(debug_info_t* in, int mode) { int i,j; debug_info_t* rc; + unsigned long flags; + + /* get a consistent copy of the debug areas */ + do { + rc = debug_info_alloc(in->name, in->pages_per_area, + in->nr_areas, in->buf_size, in->level, mode); + spin_lock_irqsave(&in->lock, flags); + if(!rc) + goto out; + /* has something changed in the meantime ? */ + if((rc->pages_per_area == in->pages_per_area) && + (rc->nr_areas == in->nr_areas)) { + break; + } + spin_unlock_irqrestore(&in->lock, flags); + debug_info_free(rc); + } while (1); - rc = debug_info_alloc(in->name, in->pages_per_area, in->nr_areas, - in->buf_size, in->level, mode); if(!rc || (mode == NO_AREAS)) goto out; @@ -386,6 +401,7 @@ debug_info_copy(debug_info_t* in, int mode) } } out: + spin_unlock_irqrestore(&in->lock, flags); return rc; } @@ -593,19 +609,15 @@ debug_open(struct inode *inode, struct file *file) debug_info_t *debug_info, *debug_info_snapshot; down(&debug_lock); - - /* find debug log and view */ - debug_info = debug_area_first; - while(debug_info != NULL){ - for (i = 0; i < DEBUG_MAX_VIEWS; i++) { - if (!debug_info->views[i]) - continue; - else if (debug_info->debugfs_entries[i] == - file->f_dentry) { - goto found; /* found view ! */ - } + debug_info = (struct debug_info*)file->f_dentry->d_inode->u.generic_ip; + /* find debug view */ + for (i = 0; i < DEBUG_MAX_VIEWS; i++) { + if (!debug_info->views[i]) + continue; + else if (debug_info->debugfs_entries[i] == + file->f_dentry) { + goto found; /* found view ! */ } - debug_info = debug_info->next; } /* no entry found */ rc = -EINVAL; @@ -833,7 +845,7 @@ extern inline void debug_finish_entry(debug_info_t * id, debug_entry_t* active, int level, int exception) { - STCK(active->id.stck); + active->id.stck = get_clock(); active->id.fields.cpuid = smp_processor_id(); active->caller = __builtin_return_address(0); active->id.fields.exception = exception; @@ -1078,7 +1090,7 @@ debug_register_view(debug_info_t * id, struct debug_view *view) if (view->input_proc) mode |= S_IWUSR; pde = debugfs_create_file(view->name, mode, id->debugfs_root_entry, - NULL, &debug_file_ops); + id , &debug_file_ops); if (!pde){ printk(KERN_WARNING "debug: debugfs_create_file() failed!"\ " Cannot register view %s/%s\n", id->name,view->name); @@ -1432,7 +1444,7 @@ int debug_dflt_header_fn(debug_info_t * id, struct debug_view *view, int area, debug_entry_t * entry, char *out_buf) { - struct timeval time_val; + struct timespec time_spec; unsigned long long time; char *except_str; unsigned long caller; @@ -1443,7 +1455,7 @@ debug_dflt_header_fn(debug_info_t * id, struct debug_view *view, time = entry->id.stck; /* adjust todclock to 1970 */ time -= 0x8126d60e46000000LL - (0x3c26700LL * 1000000 * 4096); - tod_to_timeval(time, &time_val); + tod_to_timeval(time, &time_spec); if (entry->id.fields.exception) except_str = "*"; @@ -1451,7 +1463,7 @@ debug_dflt_header_fn(debug_info_t * id, struct debug_view *view, except_str = "-"; caller = ((unsigned long) entry->caller) & PSW_ADDR_INSN; rc += sprintf(out_buf, "%02i %011lu:%06lu %1u %1s %02i %p ", - area, time_val.tv_sec, time_val.tv_usec, level, + area, time_spec.tv_sec, time_spec.tv_nsec / 1000, level, except_str, entry->id.fields.cpuid, (void *) caller); return rc; } diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 1a271b16cb5c..58fc7fbcb40e 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -18,7 +18,7 @@ #include <asm/errno.h> #include <asm/ptrace.h> #include <asm/thread_info.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/unistd.h> #include <asm/page.h> @@ -138,14 +138,14 @@ STACK_SIZE = 1 << STACK_SHIFT st %r12,__SF_BACKCHAIN(%r15) # clear back chain .endm - .macro RESTORE_ALL sync - mvc __LC_RETURN_PSW(8),SP_PSW(%r15) # move user PSW to lowcore + .macro RESTORE_ALL psworg,sync + mvc \psworg(8),SP_PSW(%r15) # move user PSW to lowcore .if !\sync - ni __LC_RETURN_PSW+1,0xfd # clear wait state bit + ni \psworg+1,0xfd # clear wait state bit .endif lm %r0,%r15,SP_R0(%r15) # load gprs 0-15 of user STORE_TIMER __LC_EXIT_TIMER - lpsw __LC_RETURN_PSW # back to caller + lpsw \psworg # back to caller .endm /* @@ -235,7 +235,7 @@ sysc_return: tm __TI_flags+3(%r9),_TIF_WORK_SVC bnz BASED(sysc_work) # there is work to do (signals etc.) sysc_leave: - RESTORE_ALL 1 + RESTORE_ALL __LC_RETURN_PSW,1 # # recheck if there is more work to do @@ -312,8 +312,6 @@ sysc_singlestep: la %r14,BASED(sysc_return) # load adr. of system return br %r1 # branch to do_single_step -__critical_end: - # # call trace before and after sys_call # @@ -571,7 +569,8 @@ io_return: tm __TI_flags+3(%r9),_TIF_WORK_INT bnz BASED(io_work) # there is work to do (signals etc.) io_leave: - RESTORE_ALL 0 + RESTORE_ALL __LC_RETURN_PSW,0 +io_done: #ifdef CONFIG_PREEMPT io_preempt: @@ -621,7 +620,7 @@ io_work_loop: # io_mcck_pending: l %r1,BASED(.Ls390_handle_mcck) - l %r14,BASED(io_work_loop) + la %r14,BASED(io_work_loop) br %r1 # TIF bit will be cleared by handler # @@ -674,6 +673,8 @@ ext_no_vtime: basr %r14,%r1 b BASED(io_return) +__critical_end: + /* * Machine check handler routines */ @@ -681,6 +682,7 @@ ext_no_vtime: .globl mcck_int_handler mcck_int_handler: spt __LC_CPU_TIMER_SAVE_AREA # revalidate cpu timer + mvc __LC_ASYNC_ENTER_TIMER(8),__LC_CPU_TIMER_SAVE_AREA lm %r0,%r15,__LC_GPREGS_SAVE_AREA # revalidate gprs SAVE_ALL_BASE __LC_SAVE_AREA+32 la %r12,__LC_MCK_OLD_PSW @@ -693,17 +695,8 @@ mcck_int_handler: mvc __LC_ASYNC_ENTER_TIMER(8),__LC_LAST_UPDATE_TIMER mvc __LC_SYNC_ENTER_TIMER(8),__LC_LAST_UPDATE_TIMER mvc __LC_EXIT_TIMER(8),__LC_LAST_UPDATE_TIMER -0: tm __LC_MCCK_CODE+2,0x08 # mwp of old psw valid? - bno BASED(mcck_no_vtime) # no -> skip cleanup critical - tm __LC_MCK_OLD_PSW+1,0x01 # interrupting from user ? - bz BASED(mcck_no_vtime) - UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER - UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER - mvc __LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER -mcck_no_vtime: #endif -0: - tm __LC_MCCK_CODE+2,0x09 # mwp + ia of old psw valid? +0: tm __LC_MCCK_CODE+2,0x09 # mwp + ia of old psw valid? bno BASED(mcck_int_main) # no -> skip cleanup critical tm __LC_MCK_OLD_PSW+1,0x01 # test problem state bit bnz BASED(mcck_int_main) # from user -> load async stack @@ -720,6 +713,16 @@ mcck_int_main: be BASED(0f) l %r15,__LC_PANIC_STACK # load panic stack 0: CREATE_STACK_FRAME __LC_MCK_OLD_PSW,__LC_SAVE_AREA+32 +#ifdef CONFIG_VIRT_CPU_ACCOUNTING + tm __LC_MCCK_CODE+2,0x08 # mwp of old psw valid? + bno BASED(mcck_no_vtime) # no -> skip cleanup critical + tm __LC_MCK_OLD_PSW+1,0x01 # interrupting from user ? + bz BASED(mcck_no_vtime) + UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER + UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER + mvc __LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER +mcck_no_vtime: +#endif l %r9,__LC_THREAD_INFO # load pointer to thread_info struct la %r2,SP_PTREGS(%r15) # load pt_regs l %r1,BASED(.Ls390_mcck) @@ -737,7 +740,7 @@ mcck_int_main: l %r1,BASED(.Ls390_handle_mcck) basr %r14,%r1 # call machine check handler mcck_return: - RESTORE_ALL 0 + RESTORE_ALL __LC_RETURN_MCCK_PSW,0 #ifdef CONFIG_SMP /* @@ -803,6 +806,10 @@ cleanup_table_sysc_leave: .long sysc_leave + 0x80000000, sysc_work_loop + 0x80000000 cleanup_table_sysc_work_loop: .long sysc_work_loop + 0x80000000, sysc_reschedule + 0x80000000 +cleanup_table_io_leave: + .long io_leave + 0x80000000, io_done + 0x80000000 +cleanup_table_io_work_loop: + .long io_work_loop + 0x80000000, io_mcck_pending + 0x80000000 cleanup_critical: clc 4(4,%r12),BASED(cleanup_table_system_call) @@ -825,10 +832,26 @@ cleanup_critical: clc 4(4,%r12),BASED(cleanup_table_sysc_work_loop+4) bl BASED(cleanup_sysc_return) 0: + clc 4(4,%r12),BASED(cleanup_table_io_leave) + bl BASED(0f) + clc 4(4,%r12),BASED(cleanup_table_io_leave+4) + bl BASED(cleanup_io_leave) +0: + clc 4(4,%r12),BASED(cleanup_table_io_work_loop) + bl BASED(0f) + clc 4(4,%r12),BASED(cleanup_table_io_work_loop+4) + bl BASED(cleanup_io_return) +0: br %r14 cleanup_system_call: mvc __LC_RETURN_PSW(8),0(%r12) + c %r12,BASED(.Lmck_old_psw) + be BASED(0f) + la %r12,__LC_SAVE_AREA+16 + b BASED(1f) +0: la %r12,__LC_SAVE_AREA+32 +1: #ifdef CONFIG_VIRT_CPU_ACCOUNTING clc __LC_RETURN_PSW+4(4),BASED(cleanup_system_call_insn+4) bh BASED(0f) @@ -838,11 +861,13 @@ cleanup_system_call: #endif clc __LC_RETURN_PSW+4(4),BASED(cleanup_system_call_insn) bh BASED(0f) - mvc __LC_SAVE_AREA(16),__LC_SAVE_AREA+16 -0: st %r13,__LC_SAVE_AREA+20 + mvc __LC_SAVE_AREA(16),0(%r12) +0: st %r13,4(%r12) + st %r12,__LC_SAVE_AREA+48 # argh SAVE_ALL __LC_SVC_OLD_PSW,__LC_SAVE_AREA,1 CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA - st %r15,__LC_SAVE_AREA+28 + l %r12,__LC_SAVE_AREA+48 # argh + st %r15,12(%r12) lh %r7,0x8a #ifdef CONFIG_VIRT_CPU_ACCOUNTING cleanup_vtime: @@ -879,17 +904,21 @@ cleanup_sysc_return: cleanup_sysc_leave: clc 4(4,%r12),BASED(cleanup_sysc_leave_insn) - be BASED(0f) + be BASED(2f) #ifdef CONFIG_VIRT_CPU_ACCOUNTING mvc __LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER clc 4(4,%r12),BASED(cleanup_sysc_leave_insn+4) - be BASED(0f) + be BASED(2f) #endif mvc __LC_RETURN_PSW(8),SP_PSW(%r15) - mvc __LC_SAVE_AREA+16(16),SP_R12(%r15) - lm %r0,%r11,SP_R0(%r15) + c %r12,BASED(.Lmck_old_psw) + bne BASED(0f) + mvc __LC_SAVE_AREA+32(16),SP_R12(%r15) + b BASED(1f) +0: mvc __LC_SAVE_AREA+16(16),SP_R12(%r15) +1: lm %r0,%r11,SP_R0(%r15) l %r15,SP_R15(%r15) -0: la %r12,__LC_RETURN_PSW +2: la %r12,__LC_RETURN_PSW br %r14 cleanup_sysc_leave_insn: #ifdef CONFIG_VIRT_CPU_ACCOUNTING @@ -897,6 +926,36 @@ cleanup_sysc_leave_insn: #endif .long sysc_leave + 10 + 0x80000000 +cleanup_io_return: + mvc __LC_RETURN_PSW(4),0(%r12) + mvc __LC_RETURN_PSW+4(4),BASED(cleanup_table_io_work_loop) + la %r12,__LC_RETURN_PSW + br %r14 + +cleanup_io_leave: + clc 4(4,%r12),BASED(cleanup_io_leave_insn) + be BASED(2f) +#ifdef CONFIG_VIRT_CPU_ACCOUNTING + mvc __LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER + clc 4(4,%r12),BASED(cleanup_io_leave_insn+4) + be BASED(2f) +#endif + mvc __LC_RETURN_PSW(8),SP_PSW(%r15) + c %r12,BASED(.Lmck_old_psw) + bne BASED(0f) + mvc __LC_SAVE_AREA+32(16),SP_R12(%r15) + b BASED(1f) +0: mvc __LC_SAVE_AREA+16(16),SP_R12(%r15) +1: lm %r0,%r11,SP_R0(%r15) + l %r15,SP_R15(%r15) +2: la %r12,__LC_RETURN_PSW + br %r14 +cleanup_io_leave_insn: +#ifdef CONFIG_VIRT_CPU_ACCOUNTING + .long io_leave + 18 + 0x80000000 +#endif + .long io_leave + 14 + 0x80000000 + /* * Integer constants */ @@ -918,6 +977,7 @@ cleanup_sysc_leave_insn: .Ls390_mcck: .long s390_do_machine_check .Ls390_handle_mcck: .long s390_handle_mcck +.Lmck_old_psw: .long __LC_MCK_OLD_PSW .Ldo_IRQ: .long do_IRQ .Ldo_extint: .long do_extint .Ldo_signal: .long do_signal diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index d9f22915008c..d0c9ffaa25db 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -18,7 +18,7 @@ #include <asm/errno.h> #include <asm/ptrace.h> #include <asm/thread_info.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/unistd.h> #include <asm/page.h> @@ -131,14 +131,14 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING) stg %r12,__SF_BACKCHAIN(%r15) .endm - .macro RESTORE_ALL sync - mvc __LC_RETURN_PSW(16),SP_PSW(%r15) # move user PSW to lowcore + .macro RESTORE_ALL psworg,sync + mvc \psworg(16),SP_PSW(%r15) # move user PSW to lowcore .if !\sync - ni __LC_RETURN_PSW+1,0xfd # clear wait state bit + ni \psworg+1,0xfd # clear wait state bit .endif lmg %r0,%r15,SP_R0(%r15) # load gprs 0-15 of user STORE_TIMER __LC_EXIT_TIMER - lpswe __LC_RETURN_PSW # back to caller + lpswe \psworg # back to caller .endm /* @@ -214,8 +214,8 @@ sysc_nr_ok: sysc_do_restart: larl %r10,sys_call_table #ifdef CONFIG_S390_SUPPORT - tm SP_PSW+3(%r15),0x01 # are we running in 31 bit mode ? - jo sysc_noemu + tm __TI_flags+5(%r9),(_TIF_31BIT>>16) # running in 31 bit mode ? + jno sysc_noemu larl %r10,sys_call_table_emu # use 31 bit emulation system calls sysc_noemu: #endif @@ -233,7 +233,7 @@ sysc_return: tm __TI_flags+7(%r9),_TIF_WORK_SVC jnz sysc_work # there is work to do (signals etc.) sysc_leave: - RESTORE_ALL 1 + RESTORE_ALL __LC_RETURN_PSW,1 # # recheck if there is more work to do @@ -308,8 +308,6 @@ sysc_singlestep: jg do_single_step # branch to do_sigtrap -__critical_end: - # # call syscall_trace before and after system call # special linkage: %r12 contains the return address for trace_svc @@ -612,7 +610,8 @@ io_return: tm __TI_flags+7(%r9),_TIF_WORK_INT jnz io_work # there is work to do (signals etc.) io_leave: - RESTORE_ALL 0 + RESTORE_ALL __LC_RETURN_PSW,0 +io_done: #ifdef CONFIG_PREEMPT io_preempt: @@ -711,6 +710,8 @@ ext_no_vtime: brasl %r14,do_extint j io_return +__critical_end: + /* * Machine check handler routines */ @@ -718,6 +719,7 @@ ext_no_vtime: mcck_int_handler: la %r1,4095 # revalidate r1 spt __LC_CPU_TIMER_SAVE_AREA-4095(%r1) # revalidate cpu timer + mvc __LC_ASYNC_ENTER_TIMER(8),__LC_CPU_TIMER_SAVE_AREA-4095(%r1) lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)# revalidate gprs SAVE_ALL_BASE __LC_SAVE_AREA+64 la %r12,__LC_MCK_OLD_PSW @@ -730,17 +732,8 @@ mcck_int_handler: mvc __LC_ASYNC_ENTER_TIMER(8),__LC_LAST_UPDATE_TIMER mvc __LC_SYNC_ENTER_TIMER(8),__LC_LAST_UPDATE_TIMER mvc __LC_EXIT_TIMER(8),__LC_LAST_UPDATE_TIMER -0: tm __LC_MCCK_CODE+2,0x08 # mwp of old psw valid? - jno mcck_no_vtime # no -> no timer update - tm __LC_MCK_OLD_PSW+1,0x01 # interrupting from user ? - jz mcck_no_vtime - UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER - UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER - mvc __LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER -mcck_no_vtime: #endif -0: - tm __LC_MCCK_CODE+2,0x09 # mwp + ia of old psw valid? +0: tm __LC_MCCK_CODE+2,0x09 # mwp + ia of old psw valid? jno mcck_int_main # no -> skip cleanup critical tm __LC_MCK_OLD_PSW+1,0x01 # test problem state bit jnz mcck_int_main # from user -> load kernel stack @@ -756,6 +749,16 @@ mcck_int_main: jz 0f lg %r15,__LC_PANIC_STACK # load panic stack 0: CREATE_STACK_FRAME __LC_MCK_OLD_PSW,__LC_SAVE_AREA+64 +#ifdef CONFIG_VIRT_CPU_ACCOUNTING + tm __LC_MCCK_CODE+2,0x08 # mwp of old psw valid? + jno mcck_no_vtime # no -> no timer update + tm __LC_MCK_OLD_PSW+1,0x01 # interrupting from user ? + jz mcck_no_vtime + UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER + UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER + mvc __LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER +mcck_no_vtime: +#endif lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct la %r2,SP_PTREGS(%r15) # load pt_regs brasl %r14,s390_do_machine_check @@ -771,7 +774,7 @@ mcck_int_main: jno mcck_return brasl %r14,s390_handle_mcck mcck_return: - RESTORE_ALL 0 + RESTORE_ALL __LC_RETURN_MCCK_PSW,0 #ifdef CONFIG_SMP /* @@ -833,6 +836,10 @@ cleanup_table_sysc_leave: .quad sysc_leave, sysc_work_loop cleanup_table_sysc_work_loop: .quad sysc_work_loop, sysc_reschedule +cleanup_table_io_leave: + .quad io_leave, io_done +cleanup_table_io_work_loop: + .quad io_work_loop, io_mcck_pending cleanup_critical: clc 8(8,%r12),BASED(cleanup_table_system_call) @@ -855,10 +862,26 @@ cleanup_critical: clc 8(8,%r12),BASED(cleanup_table_sysc_work_loop+8) jl cleanup_sysc_return 0: + clc 8(8,%r12),BASED(cleanup_table_io_leave) + jl 0f + clc 8(8,%r12),BASED(cleanup_table_io_leave+8) + jl cleanup_io_leave +0: + clc 8(8,%r12),BASED(cleanup_table_io_work_loop) + jl 0f + clc 8(8,%r12),BASED(cleanup_table_io_work_loop+8) + jl cleanup_io_return +0: br %r14 cleanup_system_call: mvc __LC_RETURN_PSW(16),0(%r12) + cghi %r12,__LC_MCK_OLD_PSW + je 0f + la %r12,__LC_SAVE_AREA+32 + j 1f +0: la %r12,__LC_SAVE_AREA+64 +1: #ifdef CONFIG_VIRT_CPU_ACCOUNTING clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+8) jh 0f @@ -868,11 +891,13 @@ cleanup_system_call: #endif clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn) jh 0f - mvc __LC_SAVE_AREA(32),__LC_SAVE_AREA+32 -0: stg %r13,__LC_SAVE_AREA+40 + mvc __LC_SAVE_AREA(32),0(%r12) +0: stg %r13,8(%r12) + stg %r12,__LC_SAVE_AREA+96 # argh SAVE_ALL __LC_SVC_OLD_PSW,__LC_SAVE_AREA,1 CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA - stg %r15,__LC_SAVE_AREA+56 + lg %r12,__LC_SAVE_AREA+96 # argh + stg %r15,24(%r12) llgh %r7,__LC_SVC_INT_CODE #ifdef CONFIG_VIRT_CPU_ACCOUNTING cleanup_vtime: @@ -909,17 +934,21 @@ cleanup_sysc_return: cleanup_sysc_leave: clc 8(8,%r12),BASED(cleanup_sysc_leave_insn) - je 0f + je 2f #ifdef CONFIG_VIRT_CPU_ACCOUNTING mvc __LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER clc 8(8,%r12),BASED(cleanup_sysc_leave_insn+8) - je 0f + je 2f #endif mvc __LC_RETURN_PSW(16),SP_PSW(%r15) - mvc __LC_SAVE_AREA+32(32),SP_R12(%r15) - lmg %r0,%r11,SP_R0(%r15) + cghi %r12,__LC_MCK_OLD_PSW + jne 0f + mvc __LC_SAVE_AREA+64(32),SP_R12(%r15) + j 1f +0: mvc __LC_SAVE_AREA+32(32),SP_R12(%r15) +1: lmg %r0,%r11,SP_R0(%r15) lg %r15,SP_R15(%r15) -0: la %r12,__LC_RETURN_PSW +2: la %r12,__LC_RETURN_PSW br %r14 cleanup_sysc_leave_insn: #ifdef CONFIG_VIRT_CPU_ACCOUNTING @@ -927,6 +956,36 @@ cleanup_sysc_leave_insn: #endif .quad sysc_leave + 12 +cleanup_io_return: + mvc __LC_RETURN_PSW(8),0(%r12) + mvc __LC_RETURN_PSW+8(8),BASED(cleanup_table_io_work_loop) + la %r12,__LC_RETURN_PSW + br %r14 + +cleanup_io_leave: + clc 8(8,%r12),BASED(cleanup_io_leave_insn) + je 2f +#ifdef CONFIG_VIRT_CPU_ACCOUNTING + mvc __LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER + clc 8(8,%r12),BASED(cleanup_io_leave_insn+8) + je 2f +#endif + mvc __LC_RETURN_PSW(16),SP_PSW(%r15) + cghi %r12,__LC_MCK_OLD_PSW + jne 0f + mvc __LC_SAVE_AREA+64(32),SP_R12(%r15) + j 1f +0: mvc __LC_SAVE_AREA+32(32),SP_R12(%r15) +1: lmg %r0,%r11,SP_R0(%r15) + lg %r15,SP_R15(%r15) +2: la %r12,__LC_RETURN_PSW + br %r14 +cleanup_io_leave_insn: +#ifdef CONFIG_VIRT_CPU_ACCOUNTING + .quad io_leave + 20 +#endif + .quad io_leave + 16 + /* * Integer constants */ diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index 2710e66fefba..55654b6e16dc 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -30,7 +30,7 @@ #include <linux/config.h> #include <asm/setup.h> #include <asm/lowcore.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/thread_info.h> #include <asm/page.h> diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index 9a8263a153cb..c9ff0404c875 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -30,7 +30,7 @@ #include <linux/config.h> #include <asm/setup.h> #include <asm/lowcore.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/thread_info.h> #include <asm/page.h> diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index 610c1d03e975..6a3f5b7473a9 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -429,13 +429,12 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, else setup_frame(sig, ka, oldset, regs); - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); } /* diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 8ca485676780..2fd75da15495 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -139,10 +139,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c index 888b5596c195..2dc14e9c8327 100644 --- a/arch/s390/lib/spinlock.c +++ b/arch/s390/lib/spinlock.c @@ -36,7 +36,7 @@ _diag44(void) } void -_raw_spin_lock_wait(spinlock_t *lp, unsigned int pc) +_raw_spin_lock_wait(raw_spinlock_t *lp, unsigned int pc) { int count = spin_retry; @@ -53,7 +53,7 @@ _raw_spin_lock_wait(spinlock_t *lp, unsigned int pc) EXPORT_SYMBOL(_raw_spin_lock_wait); int -_raw_spin_trylock_retry(spinlock_t *lp, unsigned int pc) +_raw_spin_trylock_retry(raw_spinlock_t *lp, unsigned int pc) { int count = spin_retry; @@ -67,7 +67,7 @@ _raw_spin_trylock_retry(spinlock_t *lp, unsigned int pc) EXPORT_SYMBOL(_raw_spin_trylock_retry); void -_raw_read_lock_wait(rwlock_t *rw) +_raw_read_lock_wait(raw_rwlock_t *rw) { unsigned int old; int count = spin_retry; @@ -86,7 +86,7 @@ _raw_read_lock_wait(rwlock_t *rw) EXPORT_SYMBOL(_raw_read_lock_wait); int -_raw_read_trylock_retry(rwlock_t *rw) +_raw_read_trylock_retry(raw_rwlock_t *rw) { unsigned int old; int count = spin_retry; @@ -102,7 +102,7 @@ _raw_read_trylock_retry(rwlock_t *rw) EXPORT_SYMBOL(_raw_read_trylock_retry); void -_raw_write_lock_wait(rwlock_t *rw) +_raw_write_lock_wait(raw_rwlock_t *rw) { int count = spin_retry; @@ -119,7 +119,7 @@ _raw_write_lock_wait(rwlock_t *rw) EXPORT_SYMBOL(_raw_write_lock_wait); int -_raw_write_trylock_retry(rwlock_t *rw) +_raw_write_trylock_retry(raw_rwlock_t *rw) { int count = spin_retry; diff --git a/arch/s390/lib/uaccess.S b/arch/s390/lib/uaccess.S index e8029ef42ef2..88fc94fe6488 100644 --- a/arch/s390/lib/uaccess.S +++ b/arch/s390/lib/uaccess.S @@ -11,7 +11,7 @@ #include <linux/errno.h> #include <asm/lowcore.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> .text .align 4 diff --git a/arch/s390/lib/uaccess64.S b/arch/s390/lib/uaccess64.S index 0ca56972f4f0..50219786fc7a 100644 --- a/arch/s390/lib/uaccess64.S +++ b/arch/s390/lib/uaccess64.S @@ -11,7 +11,7 @@ #include <linux/errno.h> #include <asm/lowcore.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> .text .align 4 diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 75fde949d125..856a971759b1 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -563,12 +563,14 @@ pfault_interrupt(struct pt_regs *regs, __u16 error_code) * interrupt. pfault_wait is valid. Set pfault_wait * back to zero and wake up the process. This can * safely be done because the task is still sleeping - * and can't procude new pfaults. */ + * and can't produce new pfaults. */ tsk->thread.pfault_wait = 0; wake_up_process(tsk); + put_task_struct(tsk); } } else { /* signal bit not set -> a real page is missing. */ + get_task_struct(tsk); set_task_state(tsk, TASK_UNINTERRUPTIBLE); if (xchg(&tsk->thread.pfault_wait, 1) != 0) { /* Completion interrupt was faster than the initial @@ -578,6 +580,7 @@ pfault_interrupt(struct pt_regs *regs, __u16 error_code) * mode and can't produce new pfaults. */ tsk->thread.pfault_wait = 0; set_task_state(tsk, TASK_RUNNING); + put_task_struct(tsk); } else set_tsk_need_resched(tsk); } diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index adc8109f8b77..3e804c736e64 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -37,6 +37,10 @@ config GENERIC_CALIBRATE_DELAY bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + default y + source "init/Kconfig" menu "System type" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index b5635635b5ee..4a3049080b41 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -152,10 +152,10 @@ endif @touch $@ -prepare: maketools include/asm-sh/.cpu include/asm-sh/.mach +archprepare: maketools include/asm-sh/.cpu include/asm-sh/.mach .PHONY: maketools FORCE -maketools: include/asm-sh/asm-offsets.h include/linux/version.h FORCE +maketools: include/linux/version.h FORCE $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h all: zImage @@ -168,14 +168,7 @@ compressed: zImage archclean: $(Q)$(MAKE) $(clean)=$(boot) -CLEAN_FILES += include/asm-sh/machtypes.h include/asm-sh/asm-offsets.h - -arch/sh/kernel/asm-offsets.s: include/asm include/linux/version.h \ - include/asm-sh/.cpu include/asm-sh/.mach - -include/asm-sh/asm-offsets.h: arch/sh/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) - +CLEAN_FILES += include/asm-sh/machtypes.h define archhelp @echo ' zImage - Compressed kernel image (arch/sh/boot/zImage)' diff --git a/arch/sh/boards/adx/irq_maskreg.c b/arch/sh/boards/adx/irq_maskreg.c index ca91bb0f1f5c..c0973f8d57ba 100644 --- a/arch/sh/boards/adx/irq_maskreg.c +++ b/arch/sh/boards/adx/irq_maskreg.c @@ -37,13 +37,13 @@ static void end_maskreg_irq(unsigned int irq); /* hw_interrupt_type */ static struct hw_interrupt_type maskreg_irq_type = { - " Mask Register", - startup_maskreg_irq, - shutdown_maskreg_irq, - enable_maskreg_irq, - disable_maskreg_irq, - mask_and_ack_maskreg, - end_maskreg_irq + .typename = " Mask Register", + .startup = startup_maskreg_irq, + .shutdown = shutdown_maskreg_irq, + .enable = enable_maskreg_irq, + .disable = disable_maskreg_irq, + .ack = mask_and_ack_maskreg, + .end = end_maskreg_irq }; /* actual implementatin */ diff --git a/arch/sh/boards/bigsur/io.c b/arch/sh/boards/bigsur/io.c index 697144de7419..a9fde781b21a 100644 --- a/arch/sh/boards/bigsur/io.c +++ b/arch/sh/boards/bigsur/io.c @@ -37,10 +37,6 @@ static u8 bigsur_iomap_lo_shift[BIGSUR_IOMAP_LO_NMAP]; static u32 bigsur_iomap_hi[BIGSUR_IOMAP_HI_NMAP]; static u8 bigsur_iomap_hi_shift[BIGSUR_IOMAP_HI_NMAP]; -#ifndef MAX -#define MAX(a,b) ((a)>(b)?(a):(b)) -#endif - void bigsur_port_map(u32 baseport, u32 nports, u32 addr, u8 shift) { u32 port, endport = baseport + nports; @@ -57,7 +53,7 @@ void bigsur_port_map(u32 baseport, u32 nports, u32 addr, u8 shift) addr += (1<<(BIGSUR_IOMAP_LO_SHIFT)); } - for (port = MAX(baseport, BIGSUR_IOMAP_LO_THRESH) ; + for (port = max_t(u32, baseport, BIGSUR_IOMAP_LO_THRESH); port < endport && port < BIGSUR_IOMAP_HI_THRESH ; port += (1<<BIGSUR_IOMAP_HI_SHIFT)) { pr_debug(" maphi[0x%x] = 0x%08x\n", port, addr); @@ -80,7 +76,7 @@ void bigsur_port_unmap(u32 baseport, u32 nports) bigsur_iomap_lo[port>>BIGSUR_IOMAP_LO_SHIFT] = 0; } - for (port = MAX(baseport, BIGSUR_IOMAP_LO_THRESH) ; + for (port = max_t(u32, baseport, BIGSUR_IOMAP_LO_THRESH); port < endport && port < BIGSUR_IOMAP_HI_THRESH ; port += (1<<BIGSUR_IOMAP_HI_SHIFT)) { bigsur_iomap_hi[port>>BIGSUR_IOMAP_HI_SHIFT] = 0; diff --git a/arch/sh/boards/bigsur/irq.c b/arch/sh/boards/bigsur/irq.c index c188fc32dc9a..6ddbcc77244d 100644 --- a/arch/sh/boards/bigsur/irq.c +++ b/arch/sh/boards/bigsur/irq.c @@ -228,23 +228,23 @@ static void shutdown_bigsur_irq(unsigned int irq) /* Define the IRQ structures for the L1 and L2 IRQ types */ static struct hw_interrupt_type bigsur_l1irq_type = { - "BigSur-CPLD-Level1-IRQ", - startup_bigsur_irq, - shutdown_bigsur_irq, - enable_bigsur_l1irq, - disable_bigsur_l1irq, - mask_and_ack_bigsur, - end_bigsur_irq + .typename = "BigSur-CPLD-Level1-IRQ", + .startup = startup_bigsur_irq, + .shutdown = shutdown_bigsur_irq, + .enable = enable_bigsur_l1irq, + .disable = disable_bigsur_l1irq, + .ack = mask_and_ack_bigsur, + .end = end_bigsur_irq }; static struct hw_interrupt_type bigsur_l2irq_type = { - "BigSur-CPLD-Level2-IRQ", - startup_bigsur_irq, - shutdown_bigsur_irq, - enable_bigsur_l2irq, - disable_bigsur_l2irq, - mask_and_ack_bigsur, - end_bigsur_irq + .typename = "BigSur-CPLD-Level2-IRQ", + .startup = startup_bigsur_irq, + .shutdown =shutdown_bigsur_irq, + .enable = enable_bigsur_l2irq, + .disable = disable_bigsur_l2irq, + .ack = mask_and_ack_bigsur, + .end = end_bigsur_irq }; diff --git a/arch/sh/boards/cqreek/irq.c b/arch/sh/boards/cqreek/irq.c index fa6cfe5a20a7..d1da0d844567 100644 --- a/arch/sh/boards/cqreek/irq.c +++ b/arch/sh/boards/cqreek/irq.c @@ -83,13 +83,13 @@ static void shutdown_cqreek_irq(unsigned int irq) } static struct hw_interrupt_type cqreek_irq_type = { - "CqREEK-IRQ", - startup_cqreek_irq, - shutdown_cqreek_irq, - enable_cqreek_irq, - disable_cqreek_irq, - mask_and_ack_cqreek, - end_cqreek_irq + .typename = "CqREEK-IRQ", + .startup = startup_cqreek_irq, + .shutdown = shutdown_cqreek_irq, + .enable = enable_cqreek_irq, + .disable = disable_cqreek_irq, + .ack = mask_and_ack_cqreek, + .end = end_cqreek_irq }; int cqreek_has_ide, cqreek_has_isa; diff --git a/arch/sh/boards/harp/irq.c b/arch/sh/boards/harp/irq.c index acd58489970f..52d0ba39031b 100644 --- a/arch/sh/boards/harp/irq.c +++ b/arch/sh/boards/harp/irq.c @@ -39,13 +39,13 @@ static unsigned int startup_harp_irq(unsigned int irq) } static struct hw_interrupt_type harp_irq_type = { - "Harp-IRQ", - startup_harp_irq, - shutdown_harp_irq, - enable_harp_irq, - disable_harp_irq, - mask_and_ack_harp, - end_harp_irq + .typename = "Harp-IRQ", + .startup = startup_harp_irq, + .shutdown = shutdown_harp_irq, + .enable = enable_harp_irq, + .disable = disable_harp_irq, + .ack = mask_and_ack_harp, + .end = end_harp_irq }; static void disable_harp_irq(unsigned int irq) diff --git a/arch/sh/boards/overdrive/irq.c b/arch/sh/boards/overdrive/irq.c index 23adc6be71e7..715e8feb3a68 100644 --- a/arch/sh/boards/overdrive/irq.c +++ b/arch/sh/boards/overdrive/irq.c @@ -86,13 +86,13 @@ static unsigned int startup_od_irq(unsigned int irq) } static struct hw_interrupt_type od_irq_type = { - "Overdrive-IRQ", - startup_od_irq, - shutdown_od_irq, - enable_od_irq, - disable_od_irq, - mask_and_ack_od, - end_od_irq + .typename = "Overdrive-IRQ", + .startup = startup_od_irq, + .shutdown = shutdown_od_irq, + .enable = enable_od_irq, + .disable = disable_od_irq, + .ack = mask_and_ack_od, + .end = end_od_irq }; static void disable_od_irq(unsigned int irq) diff --git a/arch/sh/boards/renesas/hs7751rvoip/irq.c b/arch/sh/boards/renesas/hs7751rvoip/irq.c index a7921f67a35f..ed4c5b50ea45 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/irq.c +++ b/arch/sh/boards/renesas/hs7751rvoip/irq.c @@ -74,13 +74,13 @@ static void end_hs7751rvoip_irq(unsigned int irq) } static struct hw_interrupt_type hs7751rvoip_irq_type = { - "HS7751RVoIP IRQ", - startup_hs7751rvoip_irq, - shutdown_hs7751rvoip_irq, - enable_hs7751rvoip_irq, - disable_hs7751rvoip_irq, - ack_hs7751rvoip_irq, - end_hs7751rvoip_irq, + .typename = "HS7751RVoIP IRQ", + .startup = startup_hs7751rvoip_irq, + .shutdown = shutdown_hs7751rvoip_irq, + .enable = enable_hs7751rvoip_irq, + .disable = disable_hs7751rvoip_irq, + .ack = ack_hs7751rvoip_irq, + .end = end_hs7751rvoip_irq, }; static void make_hs7751rvoip_irq(unsigned int irq) diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c index 95717f4f1e2d..d36c9374aed1 100644 --- a/arch/sh/boards/renesas/rts7751r2d/irq.c +++ b/arch/sh/boards/renesas/rts7751r2d/irq.c @@ -88,13 +88,13 @@ static void end_rts7751r2d_irq(unsigned int irq) } static struct hw_interrupt_type rts7751r2d_irq_type = { - "RTS7751R2D IRQ", - startup_rts7751r2d_irq, - shutdown_rts7751r2d_irq, - enable_rts7751r2d_irq, - disable_rts7751r2d_irq, - ack_rts7751r2d_irq, - end_rts7751r2d_irq, + .typename = "RTS7751R2D IRQ", + .startup = startup_rts7751r2d_irq, + .shutdown = shutdown_rts7751r2d_irq, + .enable = enable_rts7751r2d_irq, + .disable = disable_rts7751r2d_irq, + .ack = ack_rts7751r2d_irq, + .end = end_rts7751r2d_irq, }; static void make_rts7751r2d_irq(unsigned int irq) diff --git a/arch/sh/boards/renesas/systemh/irq.c b/arch/sh/boards/renesas/systemh/irq.c index 5675a4134eee..7a2eb10edb56 100644 --- a/arch/sh/boards/renesas/systemh/irq.c +++ b/arch/sh/boards/renesas/systemh/irq.c @@ -35,13 +35,13 @@ static void end_systemh_irq(unsigned int irq); /* hw_interrupt_type */ static struct hw_interrupt_type systemh_irq_type = { - " SystemH Register", - startup_systemh_irq, - shutdown_systemh_irq, - enable_systemh_irq, - disable_systemh_irq, - mask_and_ack_systemh, - end_systemh_irq + .typename = " SystemH Register", + .startup = startup_systemh_irq, + .shutdown = shutdown_systemh_irq, + .enable = enable_systemh_irq, + .disable = disable_systemh_irq, + .ack = mask_and_ack_systemh, + .end = end_systemh_irq }; static unsigned int startup_systemh_irq(unsigned int irq) diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/superh/microdev/irq.c index 1298883eca4b..1395c1e65da4 100644 --- a/arch/sh/boards/superh/microdev/irq.c +++ b/arch/sh/boards/superh/microdev/irq.c @@ -83,13 +83,13 @@ static unsigned int startup_microdev_irq(unsigned int irq) } static struct hw_interrupt_type microdev_irq_type = { - "MicroDev-IRQ", - startup_microdev_irq, - shutdown_microdev_irq, - enable_microdev_irq, - disable_microdev_irq, - mask_and_ack_microdev, - end_microdev_irq + .typename = "MicroDev-IRQ", + .startup = startup_microdev_irq, + .shutdown = shutdown_microdev_irq, + .enable = enable_microdev_irq, + .disable = disable_microdev_irq, + .ack = mask_and_ack_microdev, + .end = end_microdev_irq }; static void disable_microdev_irq(unsigned int irq) diff --git a/arch/sh/cchips/hd6446x/hd64465/io.c b/arch/sh/cchips/hd6446x/hd64465/io.c index 99ac709c550e..84cb142def0b 100644 --- a/arch/sh/cchips/hd6446x/hd64465/io.c +++ b/arch/sh/cchips/hd6446x/hd64465/io.c @@ -48,10 +48,6 @@ static unsigned char hd64465_iomap_lo_shift[HD64465_IOMAP_LO_NMAP]; static unsigned long hd64465_iomap_hi[HD64465_IOMAP_HI_NMAP]; static unsigned char hd64465_iomap_hi_shift[HD64465_IOMAP_HI_NMAP]; -#ifndef MAX -#define MAX(a,b) ((a)>(b)?(a):(b)) -#endif - #define PORT2ADDR(x) (sh_mv.mv_isa_port2addr(x)) void hd64465_port_map(unsigned short baseport, unsigned int nports, @@ -71,7 +67,7 @@ void hd64465_port_map(unsigned short baseport, unsigned int nports, addr += (1<<(HD64465_IOMAP_LO_SHIFT)); } - for (port = MAX(baseport, HD64465_IOMAP_LO_THRESH) ; + for (port = max_t(unsigned int, baseport, HD64465_IOMAP_LO_THRESH); port < endport && port < HD64465_IOMAP_HI_THRESH ; port += (1<<HD64465_IOMAP_HI_SHIFT)) { DPRINTK(" maphi[0x%x] = 0x%08lx\n", port, addr); @@ -95,7 +91,7 @@ void hd64465_port_unmap(unsigned short baseport, unsigned int nports) hd64465_iomap_lo[port>>HD64465_IOMAP_LO_SHIFT] = 0; } - for (port = MAX(baseport, HD64465_IOMAP_LO_THRESH) ; + for (port = max_t(unsigned int, baseport, HD64465_IOMAP_LO_THRESH); port < endport && port < HD64465_IOMAP_HI_THRESH ; port += (1<<HD64465_IOMAP_HI_SHIFT)) { hd64465_iomap_hi[port>>HD64465_IOMAP_HI_SHIFT] = 0; diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c index 3079234cb65b..1b6ac523b458 100644 --- a/arch/sh/cchips/voyagergx/irq.c +++ b/arch/sh/cchips/voyagergx/irq.c @@ -87,13 +87,13 @@ static void shutdown_voyagergx_irq(unsigned int irq) } static struct hw_interrupt_type voyagergx_irq_type = { - "VOYAGERGX-IRQ", - startup_voyagergx_irq, - shutdown_voyagergx_irq, - enable_voyagergx_irq, - disable_voyagergx_irq, - mask_and_ack_voyagergx, - end_voyagergx_irq, + .typename = "VOYAGERGX-IRQ", + .startup = startup_voyagergx_irq, + .shutdown = shutdown_voyagergx_irq, + .enable = enable_voyagergx_irq, + .disable = disable_voyagergx_irq, + .ack = mask_and_ack_voyagergx, + .end = end_voyagergx_irq, }; static irqreturn_t voyagergx_interrupt(int irq, void *dev_id, struct pt_regs *regs) diff --git a/arch/sh/kernel/cpu/irq_imask.c b/arch/sh/kernel/cpu/irq_imask.c index f76901e732fb..a963d00a971e 100644 --- a/arch/sh/kernel/cpu/irq_imask.c +++ b/arch/sh/kernel/cpu/irq_imask.c @@ -46,13 +46,13 @@ static unsigned int startup_imask_irq(unsigned int irq) } static struct hw_interrupt_type imask_irq_type = { - "SR.IMASK", - startup_imask_irq, - shutdown_imask_irq, - enable_imask_irq, - disable_imask_irq, - mask_and_ack_imask, - end_imask_irq + .typename = "SR.IMASK", + .startup = startup_imask_irq, + .shutdown = shutdown_imask_irq, + .enable = enable_imask_irq, + .disable = disable_imask_irq, + .ack = mask_and_ack_imask, + .end = end_imask_irq }; void static inline set_interrupt_registers(int ip) diff --git a/arch/sh/kernel/cpu/irq_ipr.c b/arch/sh/kernel/cpu/irq_ipr.c index 7ea3d2d030e5..71f92096132b 100644 --- a/arch/sh/kernel/cpu/irq_ipr.c +++ b/arch/sh/kernel/cpu/irq_ipr.c @@ -48,13 +48,13 @@ static unsigned int startup_ipr_irq(unsigned int irq) } static struct hw_interrupt_type ipr_irq_type = { - "IPR-IRQ", - startup_ipr_irq, - shutdown_ipr_irq, - enable_ipr_irq, - disable_ipr_irq, - mask_and_ack_ipr, - end_ipr_irq + .typename = "IPR-IRQ", + .startup = startup_ipr_irq, + .shutdown = shutdown_ipr_irq, + .enable = enable_ipr_irq, + .disable = disable_ipr_irq, + .ack = mask_and_ack_ipr, + .end = end_ipr_irq }; static void disable_ipr_irq(unsigned int irq) @@ -142,13 +142,13 @@ static unsigned int startup_pint_irq(unsigned int irq) } static struct hw_interrupt_type pint_irq_type = { - "PINT-IRQ", - startup_pint_irq, - shutdown_pint_irq, - enable_pint_irq, - disable_pint_irq, - mask_and_ack_pint, - end_pint_irq + .typename = "PINT-IRQ", + .startup = startup_pint_irq, + .shutdown = shutdown_pint_irq, + .enable = enable_pint_irq, + .disable = disable_pint_irq, + .ack = mask_and_ack_pint, + .end = end_pint_irq }; static void disable_pint_irq(unsigned int irq) diff --git a/arch/sh/kernel/cpu/sh4/irq_intc2.c b/arch/sh/kernel/cpu/sh4/irq_intc2.c index 099ebbf89745..f6b16ba01932 100644 --- a/arch/sh/kernel/cpu/sh4/irq_intc2.c +++ b/arch/sh/kernel/cpu/sh4/irq_intc2.c @@ -48,13 +48,13 @@ static unsigned int startup_intc2_irq(unsigned int irq) } static struct hw_interrupt_type intc2_irq_type = { - "INTC2-IRQ", - startup_intc2_irq, - shutdown_intc2_irq, - enable_intc2_irq, - disable_intc2_irq, - mask_and_ack_intc2, - end_intc2_irq + .typename = "INTC2-IRQ", + .startup = startup_intc2_irq, + .shutdown = shutdown_intc2_irq, + .enable = enable_intc2_irq, + .disable = disable_intc2_irq, + .ack = mask_and_ack_intc2, + .end = end_intc2_irq }; static void disable_intc2_irq(unsigned int irq) diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c index 8022243f0178..b475c4d2405f 100644 --- a/arch/sh/kernel/signal.c +++ b/arch/sh/kernel/signal.c @@ -546,13 +546,12 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, if (ka->sa.sa_flags & SA_ONESHOT) ka->sa.sa_handler = SIG_DFL; - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); } /* diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index df7a9b9d4cbf..02ca69918d7c 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -215,10 +215,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); @@ -234,7 +231,7 @@ static long last_rtc_update; * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static inline void do_timer_interrupt(int irq, struct pt_regs *regs) { do_timer(regs); #ifndef CONFIG_SMP @@ -252,7 +249,7 @@ static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *reg * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { @@ -285,7 +282,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * locally disabled. -arca */ write_seqlock(&xtime_lock); - do_timer_interrupt(irq, NULL, regs); + do_timer_interrupt(irq, regs); write_sequnlock(&xtime_lock); return IRQ_HANDLED; diff --git a/arch/sh64/Kconfig b/arch/sh64/Kconfig index 4c3e5334adb3..fb35b45dc130 100644 --- a/arch/sh64/Kconfig +++ b/arch/sh64/Kconfig @@ -29,10 +29,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config LOG_BUF_SHIFT - int - default 14 - config RWSEM_XCHGADD_ALGORITHM bool diff --git a/arch/sh64/Makefile b/arch/sh64/Makefile index b4fd8e13fea9..8ca57ffa2b70 100644 --- a/arch/sh64/Makefile +++ b/arch/sh64/Makefile @@ -73,11 +73,7 @@ compressed: zImage archclean: $(Q)$(MAKE) $(clean)=$(boot) -prepare: include/asm-$(ARCH)/asm-offsets.h arch/$(ARCH)/lib/syscalltab.h - -include/asm-$(ARCH)/asm-offsets.h: arch/$(ARCH)/kernel/asm-offsets.s \ - include/asm include/linux/version.h - $(call filechk,gen-asm-offsets) +archprepare: arch/$(ARCH)/lib/syscalltab.h define filechk_gen-syscalltab (set -e; \ @@ -108,7 +104,7 @@ endef arch/$(ARCH)/lib/syscalltab.h: arch/sh64/kernel/syscalls.S $(call filechk,gen-syscalltab) -CLEAN_FILES += include/asm-$(ARCH)/asm-offsets.h arch/$(ARCH)/lib/syscalltab.h +CLEAN_FILES += arch/$(ARCH)/lib/syscalltab.h define archhelp @echo ' zImage - Compressed kernel image (arch/sh64/boot/zImage)' diff --git a/arch/sh64/kernel/irq_intc.c b/arch/sh64/kernel/irq_intc.c index 43f88f3a78b0..fc99bf4e362c 100644 --- a/arch/sh64/kernel/irq_intc.c +++ b/arch/sh64/kernel/irq_intc.c @@ -107,13 +107,13 @@ static void mask_and_ack_intc(unsigned int); static void end_intc_irq(unsigned int irq); static struct hw_interrupt_type intc_irq_type = { - "INTC", - startup_intc_irq, - shutdown_intc_irq, - enable_intc_irq, - disable_intc_irq, - mask_and_ack_intc, - end_intc_irq + .typename = "INTC", + .startup = startup_intc_irq, + .shutdown = shutdown_intc_irq, + .enable = enable_intc_irq, + .disable = disable_intc_irq, + .ack = mask_and_ack_intc, + .end = end_intc_irq }; static int irlm; /* IRL mode */ diff --git a/arch/sh64/kernel/signal.c b/arch/sh64/kernel/signal.c index c6a14a87c59b..3ea8929e483b 100644 --- a/arch/sh64/kernel/signal.c +++ b/arch/sh64/kernel/signal.c @@ -664,13 +664,12 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, else setup_frame(sig, ka, oldset, regs); - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); } /* diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c index 6c84da3efc73..f4a62a10053c 100644 --- a/arch/sh64/kernel/time.c +++ b/arch/sh64/kernel/time.c @@ -247,10 +247,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); @@ -303,7 +300,7 @@ static long last_rtc_update = 0; * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static inline void do_timer_interrupt(int irq, struct pt_regs *regs) { unsigned long long current_ctc; asm ("getcon cr62, %0" : "=r" (current_ctc)); @@ -328,7 +325,7 @@ static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *reg * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { @@ -361,7 +358,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * locally disabled. -arca */ write_lock(&xtime_lock); - do_timer_interrupt(irq, NULL, regs); + do_timer_interrupt(irq, regs); write_unlock(&xtime_lock); return IRQ_HANDLED; diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index aca028aa29bf..aba05394d30a 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -211,6 +211,10 @@ config GENERIC_CALIBRATE_DELAY bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + default y + config SUN_PM bool default y diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile index 7b3bbaf083a6..dea48f6cff38 100644 --- a/arch/sparc/Makefile +++ b/arch/sparc/Makefile @@ -59,17 +59,7 @@ image tftpboot.img: vmlinux archclean: $(Q)$(MAKE) $(clean)=$(boot) -prepare: include/asm-$(ARCH)/asm_offsets.h - -arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \ - include/config/MARKER - -include/asm-$(ARCH)/asm_offsets.h: arch/$(ARCH)/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) - -CLEAN_FILES += include/asm-$(ARCH)/asm_offsets.h \ - arch/$(ARCH)/kernel/asm-offsets.s \ - arch/$(ARCH)/boot/System.map +CLEAN_FILES += arch/$(ARCH)/boot/System.map # Don't use tabs in echo arguments. define archhelp diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S index b448166f5da9..03ecb4e4614e 100644 --- a/arch/sparc/kernel/entry.S +++ b/arch/sparc/kernel/entry.S @@ -17,7 +17,7 @@ #include <asm/kgdb.h> #include <asm/contregs.h> #include <asm/ptrace.h> -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> #include <asm/psr.h> #include <asm/vaddrs.h> #include <asm/memreg.h> diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c index 7931d6f92819..787d5f1347ec 100644 --- a/arch/sparc/kernel/module.c +++ b/arch/sparc/kernel/module.c @@ -10,6 +10,7 @@ #include <linux/vmalloc.h> #include <linux/fs.h> #include <linux/string.h> +#include <linux/ctype.h> void *module_alloc(unsigned long size) { @@ -37,7 +38,7 @@ void module_free(struct module *mod, void *module_region) } /* Make generic code ignore STT_REGISTER dummy undefined symbols, - * and replace references to .func with func as in ppc64's dedotify. + * and replace references to .func with _Func */ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, @@ -64,8 +65,10 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, sym[i].st_shndx = SHN_ABS; else { char *name = strtab + sym[i].st_name; - if (name[0] == '.') - memmove(name, name+1, strlen(name)); + if (name[0] == '.') { + name[0] = '_'; + name[1] = toupper(name[1]); + } } } } diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index 597d3ff6ad68..36a40697b8d6 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -840,10 +840,7 @@ static int pci_do_settimeofday(struct timespec *tv) xtime.tv_sec = tv->tv_sec; xtime.tv_nsec = tv->tv_nsec; - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); return 0; } diff --git a/arch/sparc/kernel/sclow.S b/arch/sparc/kernel/sclow.S index 3a867fc19927..136e37c53d49 100644 --- a/arch/sparc/kernel/sclow.S +++ b/arch/sparc/kernel/sclow.S @@ -7,7 +7,7 @@ */ #include <asm/ptrace.h> -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> #include <asm/errno.h> #include <asm/winmacro.h> #include <asm/thread_info.h> diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c index 55352ed85e8a..53c192a4982f 100644 --- a/arch/sparc/kernel/setup.c +++ b/arch/sparc/kernel/setup.c @@ -32,7 +32,6 @@ #include <linux/spinlock.h> #include <linux/root_dev.h> -#include <asm/segment.h> #include <asm/system.h> #include <asm/io.h> #include <asm/processor.h> diff --git a/arch/sparc/kernel/signal.c b/arch/sparc/kernel/signal.c index 011ff35057a5..5f34d7dc2b89 100644 --- a/arch/sparc/kernel/signal.c +++ b/arch/sparc/kernel/signal.c @@ -1034,13 +1034,12 @@ handle_signal(unsigned long signr, struct k_sigaction *ka, else setup_frame(&ka->sa, regs, signr, oldset, info); } - if (!(ka->sa.sa_flags & SA_NOMASK)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NOMASK)) sigaddset(¤t->blocked, signr); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); } static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs, diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c index 8faa8dc4de43..1c8fd0fd9305 100644 --- a/arch/sparc/kernel/sparc_ksyms.c +++ b/arch/sparc/kernel/sparc_ksyms.c @@ -97,34 +97,17 @@ extern void ___rw_write_enter(void); /* Alias functions whose names begin with "." and export the aliases. * The module references will be fixed up by module_frob_arch_sections. */ -#define DOT_ALIAS2(__ret, __x, __arg1, __arg2) \ - extern __ret __x(__arg1, __arg2); \ - asm(".weak " #__x);\ - asm(#__x "=." #__x); - -DOT_ALIAS2(int, div, int, int) -DOT_ALIAS2(int, mul, int, int) -DOT_ALIAS2(int, rem, int, int) -DOT_ALIAS2(unsigned, udiv, unsigned, unsigned) -DOT_ALIAS2(unsigned, umul, unsigned, unsigned) -DOT_ALIAS2(unsigned, urem, unsigned, unsigned) - -#undef DOT_ALIAS2 +extern int _Div(int, int); +extern int _Mul(int, int); +extern int _Rem(int, int); +extern unsigned _Udiv(unsigned, unsigned); +extern unsigned _Umul(unsigned, unsigned); +extern unsigned _Urem(unsigned, unsigned); /* used by various drivers */ EXPORT_SYMBOL(sparc_cpu_model); EXPORT_SYMBOL(kernel_thread); -#ifdef CONFIG_DEBUG_SPINLOCK #ifdef CONFIG_SMP -EXPORT_SYMBOL(_do_spin_lock); -EXPORT_SYMBOL(_do_spin_unlock); -EXPORT_SYMBOL(_spin_trylock); -EXPORT_SYMBOL(_do_read_lock); -EXPORT_SYMBOL(_do_read_unlock); -EXPORT_SYMBOL(_do_write_lock); -EXPORT_SYMBOL(_do_write_unlock); -#endif -#else // XXX find what uses (or used) these. EXPORT_SYMBOL(___rw_read_enter); EXPORT_SYMBOL(___rw_read_exit); @@ -175,7 +158,6 @@ EXPORT_SYMBOL(set_auxio); EXPORT_SYMBOL(get_auxio); #endif EXPORT_SYMBOL(request_fast_irq); -EXPORT_SYMBOL(io_remap_page_range); EXPORT_SYMBOL(io_remap_pfn_range); /* P3: iounit_xxx may be needed, sun4d users */ /* EXPORT_SYMBOL(iounit_map_dma_init); */ @@ -331,12 +313,12 @@ EXPORT_SYMBOL(__lshrdi3); EXPORT_SYMBOL(__muldi3); EXPORT_SYMBOL(__divdi3); -EXPORT_SYMBOL(rem); -EXPORT_SYMBOL(urem); -EXPORT_SYMBOL(mul); -EXPORT_SYMBOL(umul); -EXPORT_SYMBOL(div); -EXPORT_SYMBOL(udiv); +EXPORT_SYMBOL(_Rem); +EXPORT_SYMBOL(_Urem); +EXPORT_SYMBOL(_Mul); +EXPORT_SYMBOL(_Umul); +EXPORT_SYMBOL(_Div); +EXPORT_SYMBOL(_Udiv); #ifdef CONFIG_DEBUG_BUGVERBOSE EXPORT_SYMBOL(do_BUG); diff --git a/arch/sparc/kernel/tick14.c b/arch/sparc/kernel/tick14.c index fd8005a3e6bd..591547af4c65 100644 --- a/arch/sparc/kernel/tick14.c +++ b/arch/sparc/kernel/tick14.c @@ -19,7 +19,6 @@ #include <linux/interrupt.h> #include <asm/oplib.h> -#include <asm/segment.h> #include <asm/timer.h> #include <asm/mostek.h> #include <asm/system.h> diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c index 6486cbf2efe9..bc015e980341 100644 --- a/arch/sparc/kernel/time.c +++ b/arch/sparc/kernel/time.c @@ -32,7 +32,6 @@ #include <linux/profile.h> #include <asm/oplib.h> -#include <asm/segment.h> #include <asm/timer.h> #include <asm/mostek.h> #include <asm/system.h> @@ -140,7 +139,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs * regs) /* Determine when to update the Mostek clock. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { @@ -555,10 +554,7 @@ static int sbus_do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); return 0; } diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile index 2296ff9dc47a..fa5006946062 100644 --- a/arch/sparc/lib/Makefile +++ b/arch/sparc/lib/Makefile @@ -9,5 +9,3 @@ lib-y := mul.o rem.o sdiv.o udiv.o umul.o urem.o ashrdi3.o memcpy.o memset.o \ strncpy_from_user.o divdi3.o udivdi3.o strlen_user.o \ copy_user.o locks.o atomic.o atomic32.o bitops.o \ lshrdi3.o ashldi3.o rwsem.o muldi3.o bitext.o - -lib-$(CONFIG_DEBUG_SPINLOCK) += debuglocks.o diff --git a/arch/sparc/lib/atomic32.c b/arch/sparc/lib/atomic32.c index 19724c5800a7..2e64e8c3e8e5 100644 --- a/arch/sparc/lib/atomic32.c +++ b/arch/sparc/lib/atomic32.c @@ -20,7 +20,7 @@ spinlock_t __atomic_hash[ATOMIC_HASH_SIZE] = { #else /* SMP */ -static spinlock_t dummy = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(dummy); #define ATOMIC_HASH_SIZE 1 #define ATOMIC_HASH(a) (&dummy) diff --git a/arch/sparc/lib/debuglocks.c b/arch/sparc/lib/debuglocks.c deleted file mode 100644 index fb182352782c..000000000000 --- a/arch/sparc/lib/debuglocks.c +++ /dev/null @@ -1,202 +0,0 @@ -/* $Id: debuglocks.c,v 1.11 2001/09/20 00:35:31 davem Exp $ - * debuglocks.c: Debugging versions of SMP locking primitives. - * - * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1998-99 Anton Blanchard (anton@progsoc.uts.edu.au) - */ - -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/threads.h> /* For NR_CPUS */ -#include <linux/spinlock.h> -#include <asm/psr.h> -#include <asm/system.h> - -#ifdef CONFIG_SMP - -/* Some notes on how these debugging routines work. When a lock is acquired - * an extra debugging member lock->owner_pc is set to the caller of the lock - * acquisition routine. Right before releasing a lock, the debugging program - * counter is cleared to zero. - * - * Furthermore, since PC's are 4 byte aligned on Sparc, we stuff the CPU - * number of the owner in the lowest two bits. - */ - -#define STORE_CALLER(A) __asm__ __volatile__("mov %%i7, %0" : "=r" (A)); - -static inline void show(char *str, spinlock_t *lock, unsigned long caller) -{ - int cpu = smp_processor_id(); - - printk("%s(%p) CPU#%d stuck at %08lx, owner PC(%08lx):CPU(%lx)\n",str, - lock, cpu, caller, lock->owner_pc & ~3, lock->owner_pc & 3); -} - -static inline void show_read(char *str, rwlock_t *lock, unsigned long caller) -{ - int cpu = smp_processor_id(); - - printk("%s(%p) CPU#%d stuck at %08lx, owner PC(%08lx):CPU(%lx)\n", str, - lock, cpu, caller, lock->owner_pc & ~3, lock->owner_pc & 3); -} - -static inline void show_write(char *str, rwlock_t *lock, unsigned long caller) -{ - int cpu = smp_processor_id(); - int i; - - printk("%s(%p) CPU#%d stuck at %08lx, owner PC(%08lx):CPU(%lx)", str, - lock, cpu, caller, lock->owner_pc & ~3, lock->owner_pc & 3); - - for(i = 0; i < NR_CPUS; i++) - printk(" reader[%d]=%08lx", i, lock->reader_pc[i]); - - printk("\n"); -} - -#undef INIT_STUCK -#define INIT_STUCK 100000000 - -void _do_spin_lock(spinlock_t *lock, char *str) -{ - unsigned long caller; - unsigned long val; - int cpu = smp_processor_id(); - int stuck = INIT_STUCK; - - STORE_CALLER(caller); - -again: - __asm__ __volatile__("ldstub [%1], %0" : "=r" (val) : "r" (&(lock->lock))); - if(val) { - while(lock->lock) { - if (!--stuck) { - show(str, lock, caller); - stuck = INIT_STUCK; - } - barrier(); - } - goto again; - } - lock->owner_pc = (cpu & 3) | (caller & ~3); -} - -int _spin_trylock(spinlock_t *lock) -{ - unsigned long val; - unsigned long caller; - int cpu = smp_processor_id(); - - STORE_CALLER(caller); - - __asm__ __volatile__("ldstub [%1], %0" : "=r" (val) : "r" (&(lock->lock))); - if(!val) { - /* We got it, record our identity for debugging. */ - lock->owner_pc = (cpu & 3) | (caller & ~3); - } - return val == 0; -} - -void _do_spin_unlock(spinlock_t *lock) -{ - lock->owner_pc = 0; - barrier(); - lock->lock = 0; -} - -void _do_read_lock(rwlock_t *rw, char *str) -{ - unsigned long caller; - unsigned long val; - int cpu = smp_processor_id(); - int stuck = INIT_STUCK; - - STORE_CALLER(caller); - -wlock_again: - __asm__ __volatile__("ldstub [%1 + 3], %0" : "=r" (val) : "r" (&(rw->lock))); - if(val) { - while(rw->lock & 0xff) { - if (!--stuck) { - show_read(str, rw, caller); - stuck = INIT_STUCK; - } - barrier(); - } - goto wlock_again; - } - - rw->reader_pc[cpu] = caller; - barrier(); - rw->lock++; -} - -void _do_read_unlock(rwlock_t *rw, char *str) -{ - unsigned long caller; - unsigned long val; - int cpu = smp_processor_id(); - int stuck = INIT_STUCK; - - STORE_CALLER(caller); - -wlock_again: - __asm__ __volatile__("ldstub [%1 + 3], %0" : "=r" (val) : "r" (&(rw->lock))); - if(val) { - while(rw->lock & 0xff) { - if (!--stuck) { - show_read(str, rw, caller); - stuck = INIT_STUCK; - } - barrier(); - } - goto wlock_again; - } - - rw->reader_pc[cpu] = 0; - barrier(); - rw->lock -= 0x1ff; -} - -void _do_write_lock(rwlock_t *rw, char *str) -{ - unsigned long caller; - unsigned long val; - int cpu = smp_processor_id(); - int stuck = INIT_STUCK; - - STORE_CALLER(caller); - -wlock_again: - __asm__ __volatile__("ldstub [%1 + 3], %0" : "=r" (val) : "r" (&(rw->lock))); - if(val) { -wlock_wait: - while(rw->lock) { - if (!--stuck) { - show_write(str, rw, caller); - stuck = INIT_STUCK; - } - barrier(); - } - goto wlock_again; - } - - if (rw->lock & ~0xff) { - *(((unsigned char *)&rw->lock)+3) = 0; - barrier(); - goto wlock_wait; - } - - barrier(); - rw->owner_pc = (cpu & 3) | (caller & ~3); -} - -void _do_write_unlock(rwlock_t *rw) -{ - rw->owner_pc = 0; - barrier(); - rw->lock = 0; -} - -#endif /* SMP */ diff --git a/arch/sparc/lib/mul.S b/arch/sparc/lib/mul.S index 83dffbc2f62f..da693560d878 100644 --- a/arch/sparc/lib/mul.S +++ b/arch/sparc/lib/mul.S @@ -16,7 +16,9 @@ */ .globl .mul + .globl _Mul .mul: +_Mul: /* needed for export */ mov %o0, %y ! multiplier -> Y andncc %o0, 0xfff, %g0 ! test bits 12..31 be Lmul_shortway ! if zero, can do it the short way diff --git a/arch/sparc/lib/rem.S b/arch/sparc/lib/rem.S index 44508148d055..bf015a90d07e 100644 --- a/arch/sparc/lib/rem.S +++ b/arch/sparc/lib/rem.S @@ -43,7 +43,9 @@ .globl .rem + .globl _Rem .rem: +_Rem: /* needed for export */ ! compute sign of result; if neither is negative, no problem orcc %o1, %o0, %g0 ! either negative? bge 2f ! no, go do the divide diff --git a/arch/sparc/lib/sdiv.S b/arch/sparc/lib/sdiv.S index e0ad80b6f63d..af9451629d0b 100644 --- a/arch/sparc/lib/sdiv.S +++ b/arch/sparc/lib/sdiv.S @@ -43,7 +43,9 @@ .globl .div + .globl _Div .div: +_Div: /* needed for export */ ! compute sign of result; if neither is negative, no problem orcc %o1, %o0, %g0 ! either negative? bge 2f ! no, go do the divide diff --git a/arch/sparc/lib/udiv.S b/arch/sparc/lib/udiv.S index 2abfc6b0f3e9..169e01da6715 100644 --- a/arch/sparc/lib/udiv.S +++ b/arch/sparc/lib/udiv.S @@ -43,7 +43,9 @@ .globl .udiv + .globl _Udiv .udiv: +_Udiv: /* needed for export */ ! Ready to divide. Compute size of quotient; scale comparand. orcc %o1, %g0, %o5 diff --git a/arch/sparc/lib/umul.S b/arch/sparc/lib/umul.S index a784720a8a22..f0e5b20a2536 100644 --- a/arch/sparc/lib/umul.S +++ b/arch/sparc/lib/umul.S @@ -21,7 +21,9 @@ */ .globl .umul + .globl _Umul .umul: +_Umul: /* needed for export */ or %o0, %o1, %o4 mov %o0, %y ! multiplier -> Y diff --git a/arch/sparc/lib/urem.S b/arch/sparc/lib/urem.S index ec7f0c502c56..6b92bdc8b04c 100644 --- a/arch/sparc/lib/urem.S +++ b/arch/sparc/lib/urem.S @@ -41,7 +41,9 @@ */ .globl .urem + .globl _Urem .urem: +_Urem: /* needed for export */ ! Ready to divide. Compute size of quotient; scale comparand. orcc %o1, %g0, %o5 diff --git a/arch/sparc/mm/fault.c b/arch/sparc/mm/fault.c index 37f4107bae66..2bbd53f3cafb 100644 --- a/arch/sparc/mm/fault.c +++ b/arch/sparc/mm/fault.c @@ -23,7 +23,6 @@ #include <linux/module.h> #include <asm/system.h> -#include <asm/segment.h> #include <asm/page.h> #include <asm/pgtable.h> #include <asm/memreg.h> diff --git a/arch/sparc/mm/generic.c b/arch/sparc/mm/generic.c index db27eee3bda1..20ccb957fb77 100644 --- a/arch/sparc/mm/generic.c +++ b/arch/sparc/mm/generic.c @@ -16,31 +16,6 @@ #include <asm/cacheflush.h> #include <asm/tlbflush.h> -static inline void forget_pte(pte_t page) -{ -#if 0 /* old 2.4 code */ - if (pte_none(page)) - return; - if (pte_present(page)) { - unsigned long pfn = pte_pfn(page); - struct page *ptpage; - if (!pfn_valid(pfn)) - return; - ptpage = pfn_to_page(pfn); - if (PageReserved(ptpage)) - return; - page_cache_release(ptpage); - return; - } - swap_free(pte_to_swp_entry(page)); -#else - if (!pte_none(page)) { - printk("forget_pte: old mapping existed!\n"); - BUG(); - } -#endif -} - /* Remap IO memory, the same way as remap_pfn_range(), but use * the obio memory space. * @@ -60,7 +35,6 @@ static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte, unsigne pte_t oldpage = *pte; pte_clear(mm, address, pte); set_pte(pte, mk_pte_io(offset, prot, space)); - forget_pte(oldpage); address += PAGE_SIZE; offset += PAGE_SIZE; pte++; @@ -88,37 +62,6 @@ static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned return 0; } -int io_remap_page_range(struct vm_area_struct *vma, unsigned long from, unsigned long offset, unsigned long size, pgprot_t prot, int space) -{ - int error = 0; - pgd_t * dir; - unsigned long beg = from; - unsigned long end = from + size; - struct mm_struct *mm = vma->vm_mm; - - prot = __pgprot(pg_iobits); - offset -= from; - dir = pgd_offset(mm, from); - flush_cache_range(vma, beg, end); - - spin_lock(&mm->page_table_lock); - while (from < end) { - pmd_t *pmd = pmd_alloc(current->mm, dir, from); - error = -ENOMEM; - if (!pmd) - break; - error = io_remap_pmd_range(mm, pmd, from, end - from, offset + from, prot, space); - if (error) - break; - from = (from + PGDIR_SIZE) & PGDIR_MASK; - dir++; - } - spin_unlock(&mm->page_table_lock); - - flush_tlb_range(vma, beg, end); - return error; -} - int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot) { diff --git a/arch/sparc/mm/hypersparc.S b/arch/sparc/mm/hypersparc.S index 54b8e764b042..a231cca37216 100644 --- a/arch/sparc/mm/hypersparc.S +++ b/arch/sparc/mm/hypersparc.S @@ -6,7 +6,7 @@ #include <asm/ptrace.h> #include <asm/psr.h> -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> #include <asm/asi.h> #include <asm/page.h> #include <asm/pgtsrmmu.h> diff --git a/arch/sparc/mm/init.c b/arch/sparc/mm/init.c index ec2e05028a10..c03babaa0498 100644 --- a/arch/sparc/mm/init.c +++ b/arch/sparc/mm/init.c @@ -25,7 +25,6 @@ #include <linux/bootmem.h> #include <asm/system.h> -#include <asm/segment.h> #include <asm/vac-ops.h> #include <asm/page.h> #include <asm/pgtable.h> diff --git a/arch/sparc/mm/swift.S b/arch/sparc/mm/swift.S index 2dcaa5ac1a38..cd90f3fdc4e7 100644 --- a/arch/sparc/mm/swift.S +++ b/arch/sparc/mm/swift.S @@ -9,7 +9,7 @@ #include <asm/asi.h> #include <asm/page.h> #include <asm/pgtsrmmu.h> -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> .text .align 4 diff --git a/arch/sparc/mm/tsunami.S b/arch/sparc/mm/tsunami.S index 8acd1787fde2..697af617594a 100644 --- a/arch/sparc/mm/tsunami.S +++ b/arch/sparc/mm/tsunami.S @@ -6,7 +6,7 @@ #include <linux/config.h> #include <asm/ptrace.h> -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> #include <asm/psr.h> #include <asm/asi.h> #include <asm/page.h> diff --git a/arch/sparc/mm/viking.S b/arch/sparc/mm/viking.S index f58712d26bf5..3cbd6de18dde 100644 --- a/arch/sparc/mm/viking.S +++ b/arch/sparc/mm/viking.S @@ -9,7 +9,7 @@ #include <linux/config.h> #include <asm/ptrace.h> #include <asm/psr.h> -#include <asm/asm_offsets.h> +#include <asm/asm-offsets.h> #include <asm/asi.h> #include <asm/mxcc.h> #include <asm/page.h> diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index 9afd28e2c4d5..1e9d8638a28a 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -5,6 +5,16 @@ mainmenu "Linux/UltraSPARC Kernel Configuration" +config SPARC64 + bool + default y + help + SPARC is a family of RISC microprocessors designed and marketed by + Sun Microsystems, incorporated. This port covers the newer 64-bit + UltraSPARC. The UltraLinux project maintains both the SPARC32 and + SPARC64 ports; its web page is available at + <http://www.ultralinux.org/>. + config 64BIT def_bool y @@ -16,6 +26,10 @@ config TIME_INTERPOLATION bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + default y + choice prompt "Kernel page size" default SPARC64_PAGE_SIZE_8KB @@ -71,75 +85,6 @@ config SYSVIPC_COMPAT menu "General machine setup" -config BBC_I2C - tristate "UltraSPARC-III bootbus i2c controller driver" - depends on PCI - help - The BBC devices on the UltraSPARC III have two I2C controllers. The - first I2C controller connects mainly to configuration PROMs (NVRAM, - CPU configuration, DIMM types, etc.). The second I2C controller - connects to environmental control devices such as fans and - temperature sensors. The second controller also connects to the - smartcard reader, if present. Say Y to enable support for these. - -config VT - bool "Virtual terminal" if EMBEDDED - select INPUT - default y - ---help--- - If you say Y here, you will get support for terminal devices with - display and keyboard devices. These are called "virtual" because you - can run several virtual terminals (also called virtual consoles) on - one physical terminal. This is rather useful, for example one - virtual terminal can collect system messages and warnings, another - one can be used for a text-mode user session, and a third could run - an X session, all in parallel. Switching between virtual terminals - is done with certain key combinations, usually Alt-<function key>. - - The setterm command ("man setterm") can be used to change the - properties (such as colors or beeping) of a virtual terminal. The - man page console_codes(4) ("man console_codes") contains the special - character sequences that can be used to change those properties - directly. The fonts used on virtual terminals can be changed with - the setfont ("man setfont") command and the key bindings are defined - with the loadkeys ("man loadkeys") command. - - You need at least one virtual terminal device in order to make use - of your keyboard and monitor. Therefore, only people configuring an - embedded system would want to say N here in order to save some - memory; the only way to log into such a system is then via a serial - or network connection. - - If unsure, say Y, or else you won't be able to do much with your new - shiny Linux system :-) - -config VT_CONSOLE - bool "Support for console on virtual terminal" if EMBEDDED - depends on VT - default y - ---help--- - The system console is the device which receives all kernel messages - and warnings and which allows logins in single user mode. If you - answer Y here, a virtual terminal (the device used to interact with - a physical terminal) can be used as system console. This is the most - common mode of operations, so you should say Y here unless you want - the kernel messages be output only to a serial port (in which case - you should say Y to "Console on serial port", below). - - If you do say Y here, by default the currently visible virtual - terminal (/dev/tty0) will be used as system console. You can change - that with a kernel command line option such as "console=tty3" which - would use the third virtual terminal as system console. (Try "man - bootparam" or see the documentation of your boot loader (lilo or - loadlin) about how to pass options to the kernel at boot time.) - - If unsure, say Y. - -config HW_CONSOLE - bool - depends on VT - default y - config SMP bool "Symmetric multi-processing support" ---help--- @@ -205,17 +150,6 @@ config US2E_FREQ If in doubt, say N. -# Identify this as a Sparc64 build -config SPARC64 - bool - default y - help - SPARC is a family of RISC microprocessors designed and marketed by - Sun Microsystems, incorporated. This port covers the newer 64-bit - UltraSPARC. The UltraLinux project maintains both the SPARC32 and - SPARC64 ports; its web page is available at - <http://www.ultralinux.org/>. - # Global things across all Sun machines. config RWSEM_GENERIC_SPINLOCK bool @@ -246,6 +180,10 @@ config HUGETLB_PAGE_SIZE_64K endchoice +endmenu + +source "mm/Kconfig" + config GENERIC_ISA_DMA bool default y @@ -344,33 +282,6 @@ config PCI_DOMAINS bool default PCI -config RTC - tristate - depends on PCI - default y - ---help--- - If you say Y here and create a character special file /dev/rtc with - major number 10 and minor number 135 using mknod ("man mknod"), you - will get access to the real time clock (or hardware clock) built - into your computer. - - Every PC has such a clock built in. It can be used to generate - signals from as low as 1Hz up to 8192Hz, and can also be used - as a 24 hour alarm. It reports status information via the file - /proc/driver/rtc and its behaviour is set by various ioctls on - /dev/rtc. - - If you run Linux on a multiprocessor machine and said Y to - "Symmetric Multi Processing" above, you should say Y here to read - and set the RTC in an SMP compatible fashion. - - If you think you have a use for such a device (such as periodic data - sampling), then say Y here, and read <file:Documentation/rtc.txt> - for details. - - To compile this driver as a module, choose M here: the - module will be called rtc. - source "drivers/pci/Kconfig" config SUN_OPENPROMFS @@ -414,6 +325,8 @@ config BINFMT_AOUT32 If you want to run SunOS binaries (see SunOS binary emulation below) or other a.out binaries, say Y. If unsure, say N. +menu "Executable file formats" + source "fs/Kconfig.binfmt" config SUNOS_EMUL @@ -436,74 +349,7 @@ config SOLARIS_EMUL To compile this code as a module, choose M here: the module will be called solaris. -source "drivers/parport/Kconfig" - -config PRINTER - tristate "Parallel printer support" - depends on PARPORT - ---help--- - If you intend to attach a printer to the parallel port of your Linux - box (as opposed to using a serial printer; if the connector at the - printer has 9 or 25 holes ["female"], then it's serial), say Y. - Also read the Printing-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - It is possible to share one parallel port among several devices - (e.g. printer and ZIP drive) and it is safe to compile the - corresponding drivers into the kernel. - To compile this driver as a module, choose M here and read - <file:Documentation/parport.txt>. The module will be called lp. - - If you have several parallel ports, you can specify which ports to - use with the "lp" kernel command line option. (Try "man bootparam" - or see the documentation of your boot loader (lilo or loadlin) about - how to pass options to the kernel at boot time.) The syntax of the - "lp" command line option can be found in <file:drivers/char/lp.c>. - - If you have more than 8 printers, you need to increase the LP_NO - macro in lp.c and the PARPORT_MAX macro in parport.h. - -config PPDEV - tristate "Support for user-space parallel port device drivers" - depends on PARPORT - ---help--- - Saying Y to this adds support for /dev/parport device nodes. This - is needed for programs that want portable access to the parallel - port, for instance deviceid (which displays Plug-and-Play device - IDs). - - This is the parallel port equivalent of SCSI generic support (sg). - It is safe to say N to this -- it is not needed for normal printing - or parallel port CD-ROM/disk support. - - To compile this driver as a module, choose M here: the - module will be called ppdev. - - If unsure, say N. - -config ENVCTRL - tristate "SUNW, envctrl support" - depends on PCI - help - Kernel support for temperature and fan monitoring on Sun SME - machines. - - To compile this driver as a module, choose M here: the - module will be called envctrl. - -config DISPLAY7SEG - tristate "7-Segment Display support" - depends on PCI - ---help--- - This is the driver for the 7-segment display and LED present on - Sun Microsystems CompactPCI models CP1400 and CP1500. - - To compile this driver as a module, choose M here: the - module will be called display7seg. - - If you do not have a CompactPCI model CP1400 or CP1500, or - another UltraSPARC-IIi-cEngine boardset with a 7-segment display, - you should say N to this option. +endmenu config CMDLINE_BOOL bool "Default bootloader kernel arguments" @@ -521,148 +367,16 @@ config CMDLINE NOTE: This option WILL override the PROM bootargs setting! -source "mm/Kconfig" - -endmenu - source "net/Kconfig" -source "drivers/base/Kconfig" - -source "drivers/video/Kconfig" - -source "drivers/serial/Kconfig" +source "drivers/Kconfig" source "drivers/sbus/char/Kconfig" -source "drivers/mtd/Kconfig" - -source "drivers/block/Kconfig" - -source "drivers/ide/Kconfig" - -source "drivers/scsi/Kconfig" - source "drivers/fc4/Kconfig" -source "drivers/md/Kconfig" - -if PCI -source "drivers/message/fusion/Kconfig" -endif - -source "drivers/ieee1394/Kconfig" - -source "drivers/net/Kconfig" - -source "drivers/isdn/Kconfig" - -source "drivers/telephony/Kconfig" - -# This one must be before the filesystem configs. -DaveM - -menu "Unix98 PTY support" - -config UNIX98_PTYS - bool "Unix98 PTY support" - ---help--- - A pseudo terminal (PTY) is a software device consisting of two - halves: a master and a slave. The slave device behaves identical to - a physical terminal; the master device is used by a process to - read data from and write data to the slave, thereby emulating a - terminal. Typical programs for the master side are telnet servers - and xterms. - - Linux has traditionally used the BSD-like names /dev/ptyxx for - masters and /dev/ttyxx for slaves of pseudo terminals. This scheme - has a number of problems. The GNU C library glibc 2.1 and later, - however, supports the Unix98 naming standard: in order to acquire a - pseudo terminal, a process opens /dev/ptmx; the number of the pseudo - terminal is then made available to the process and the pseudo - terminal slave can be accessed as /dev/pts/<number>. What was - traditionally /dev/ttyp2 will then be /dev/pts/2, for example. - - The entries in /dev/pts/ are created on the fly by a virtual - file system; therefore, if you say Y here you should say Y to - "/dev/pts file system for Unix98 PTYs" as well. - - If you want to say Y here, you need to have the C library glibc 2.1 - or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*"). - Read the instructions in <file:Documentation/Changes> pertaining to - pseudo terminals. It's safe to say N. - -config UNIX98_PTY_COUNT - int "Maximum number of Unix98 PTYs in use (0-2048)" - depends on UNIX98_PTYS - default "256" - help - The maximum number of Unix98 PTYs that can be used at any one time. - The default is 256, and should be enough for desktop systems. Server - machines which support incoming telnet/rlogin/ssh connections and/or - serve several X terminals may want to increase this: every incoming - connection and every xterm uses up one PTY. - - When not in use, each additional set of 256 PTYs occupy - approximately 8 KB of kernel memory on 32-bit architectures. - -endmenu - -menu "XFree86 DRI support" - -config DRM - bool "Direct Rendering Manager (XFree86 DRI support)" - help - Kernel-level support for the Direct Rendering Infrastructure (DRI) - introduced in XFree86 4.0. If you say Y here, you need to select - the module that's right for your graphics card from the list below. - These modules provide support for synchronization, security, and - DMA transfers. Please see <http://dri.sourceforge.net/> for more - details. You should also select and configure AGP - (/dev/agpgart) support. - -config DRM_FFB - tristate "Creator/Creator3D" - depends on DRM && BROKEN - help - Choose this option if you have one of Sun's Creator3D-based graphics - and frame buffer cards. Product page at - <http://www.sun.com/desktop/products/Graphics/creator3d.html>. - -config DRM_TDFX - tristate "3dfx Banshee/Voodoo3+" - depends on DRM - help - Choose this option if you have a 3dfx Banshee or Voodoo3 (or later), - graphics card. If M is selected, the module will be called tdfx. - -config DRM_R128 - tristate "ATI Rage 128" - depends on DRM - help - Choose this option if you have an ATI Rage 128 graphics card. If M - is selected, the module will be called r128. AGP support for - this card is strongly suggested (unless you have a PCI version). - -endmenu - -source "drivers/input/Kconfig" - -source "drivers/i2c/Kconfig" - -source "drivers/hwmon/Kconfig" - source "fs/Kconfig" -source "drivers/media/Kconfig" - -source "sound/Kconfig" - -source "drivers/usb/Kconfig" - -source "drivers/infiniband/Kconfig" - -source "drivers/char/watchdog/Kconfig" - source "arch/sparc64/oprofile/Kconfig" source "arch/sparc64/Kconfig.debug" diff --git a/arch/sparc64/kernel/asm-offsets.c b/arch/sparc64/kernel/asm-offsets.c new file mode 100644 index 000000000000..9e263112a6e2 --- /dev/null +++ b/arch/sparc64/kernel/asm-offsets.c @@ -0,0 +1 @@ +/* Dummy asm-offsets.c file. Required by kbuild and ready to be used - hint! */ diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index 88332f00094a..3e0badb820c5 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -21,6 +21,7 @@ #include <asm/visasm.h> #include <asm/estate.h> #include <asm/auxio.h> +#include <asm/sfafsr.h> #define curptr g6 @@ -690,14 +691,159 @@ netbsd_syscall: retl nop - /* These next few routines must be sure to clear the - * SFSR FaultValid bit so that the fast tlb data protection - * handler does not flush the wrong context and lock up the - * box. + /* We need to carefully read the error status, ACK + * the errors, prevent recursive traps, and pass the + * information on to C code for logging. + * + * We pass the AFAR in as-is, and we encode the status + * information as described in asm-sparc64/sfafsr.h + */ + .globl __spitfire_access_error +__spitfire_access_error: + /* Disable ESTATE error reporting so that we do not + * take recursive traps and RED state the processor. + */ + stxa %g0, [%g0] ASI_ESTATE_ERROR_EN + membar #Sync + + mov UDBE_UE, %g1 + ldxa [%g0] ASI_AFSR, %g4 ! Get AFSR + + /* __spitfire_cee_trap branches here with AFSR in %g4 and + * UDBE_CE in %g1. It only clears ESTATE_ERR_CE in the + * ESTATE Error Enable register. + */ +__spitfire_cee_trap_continue: + ldxa [%g0] ASI_AFAR, %g5 ! Get AFAR + + rdpr %tt, %g3 + and %g3, 0x1ff, %g3 ! Paranoia + sllx %g3, SFSTAT_TRAP_TYPE_SHIFT, %g3 + or %g4, %g3, %g4 + rdpr %tl, %g3 + cmp %g3, 1 + mov 1, %g3 + bleu %xcc, 1f + sllx %g3, SFSTAT_TL_GT_ONE_SHIFT, %g3 + + or %g4, %g3, %g4 + + /* Read in the UDB error register state, clearing the + * sticky error bits as-needed. We only clear them if + * the UE bit is set. Likewise, __spitfire_cee_trap + * below will only do so if the CE bit is set. + * + * NOTE: UltraSparc-I/II have high and low UDB error + * registers, corresponding to the two UDB units + * present on those chips. UltraSparc-IIi only + * has a single UDB, called "SDB" in the manual. + * For IIi the upper UDB register always reads + * as zero so for our purposes things will just + * work with the checks below. */ - .globl __do_data_access_exception - .globl __do_data_access_exception_tl1 -__do_data_access_exception_tl1: +1: ldxa [%g0] ASI_UDBH_ERROR_R, %g3 + and %g3, 0x3ff, %g7 ! Paranoia + sllx %g7, SFSTAT_UDBH_SHIFT, %g7 + or %g4, %g7, %g4 + andcc %g3, %g1, %g3 ! UDBE_UE or UDBE_CE + be,pn %xcc, 1f + nop + stxa %g3, [%g0] ASI_UDB_ERROR_W + membar #Sync + +1: mov 0x18, %g3 + ldxa [%g3] ASI_UDBL_ERROR_R, %g3 + and %g3, 0x3ff, %g7 ! Paranoia + sllx %g7, SFSTAT_UDBL_SHIFT, %g7 + or %g4, %g7, %g4 + andcc %g3, %g1, %g3 ! UDBE_UE or UDBE_CE + be,pn %xcc, 1f + nop + mov 0x18, %g7 + stxa %g3, [%g7] ASI_UDB_ERROR_W + membar #Sync + +1: /* Ok, now that we've latched the error state, + * clear the sticky bits in the AFSR. + */ + stxa %g4, [%g0] ASI_AFSR + membar #Sync + + rdpr %tl, %g2 + cmp %g2, 1 + rdpr %pil, %g2 + bleu,pt %xcc, 1f + wrpr %g0, 15, %pil + + ba,pt %xcc, etraptl1 + rd %pc, %g7 + + ba,pt %xcc, 2f + nop + +1: ba,pt %xcc, etrap_irq + rd %pc, %g7 + +2: mov %l4, %o1 + mov %l5, %o2 + call spitfire_access_error + add %sp, PTREGS_OFF, %o0 + ba,pt %xcc, rtrap + clr %l6 + + /* This is the trap handler entry point for ECC correctable + * errors. They are corrected, but we listen for the trap + * so that the event can be logged. + * + * Disrupting errors are either: + * 1) single-bit ECC errors during UDB reads to system + * memory + * 2) data parity errors during write-back events + * + * As far as I can make out from the manual, the CEE trap + * is only for correctable errors during memory read + * accesses by the front-end of the processor. + * + * The code below is only for trap level 1 CEE events, + * as it is the only situation where we can safely record + * and log. For trap level >1 we just clear the CE bit + * in the AFSR and return. + * + * This is just like __spiftire_access_error above, but it + * specifically handles correctable errors. If an + * uncorrectable error is indicated in the AFSR we + * will branch directly above to __spitfire_access_error + * to handle it instead. Uncorrectable therefore takes + * priority over correctable, and the error logging + * C code will notice this case by inspecting the + * trap type. + */ + .globl __spitfire_cee_trap +__spitfire_cee_trap: + ldxa [%g0] ASI_AFSR, %g4 ! Get AFSR + mov 1, %g3 + sllx %g3, SFAFSR_UE_SHIFT, %g3 + andcc %g4, %g3, %g0 ! Check for UE + bne,pn %xcc, __spitfire_access_error + nop + + /* Ok, in this case we only have a correctable error. + * Indicate we only wish to capture that state in register + * %g1, and we only disable CE error reporting unlike UE + * handling which disables all errors. + */ + ldxa [%g0] ASI_ESTATE_ERROR_EN, %g3 + andn %g3, ESTATE_ERR_CE, %g3 + stxa %g3, [%g0] ASI_ESTATE_ERROR_EN + membar #Sync + + /* Preserve AFSR in %g4, indicate UDB state to capture in %g1 */ + ba,pt %xcc, __spitfire_cee_trap_continue + mov UDBE_CE, %g1 + + .globl __spitfire_data_access_exception + .globl __spitfire_data_access_exception_tl1 +__spitfire_data_access_exception_tl1: rdpr %pstate, %g4 wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate mov TLB_SFSR, %g3 @@ -706,9 +852,25 @@ __do_data_access_exception_tl1: ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR stxa %g0, [%g3] ASI_DMMU ! Clear SFSR.FaultValid bit membar #Sync + rdpr %tt, %g3 + cmp %g3, 0x80 ! first win spill/fill trap + blu,pn %xcc, 1f + cmp %g3, 0xff ! last win spill/fill trap + bgu,pn %xcc, 1f + nop ba,pt %xcc, winfix_dax rdpr %tpc, %g3 -__do_data_access_exception: +1: sethi %hi(109f), %g7 + ba,pt %xcc, etraptl1 +109: or %g7, %lo(109b), %g7 + mov %l4, %o1 + mov %l5, %o2 + call spitfire_data_access_exception_tl1 + add %sp, PTREGS_OFF, %o0 + ba,pt %xcc, rtrap + clr %l6 + +__spitfire_data_access_exception: rdpr %pstate, %g4 wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate mov TLB_SFSR, %g3 @@ -722,20 +884,19 @@ __do_data_access_exception: 109: or %g7, %lo(109b), %g7 mov %l4, %o1 mov %l5, %o2 - call data_access_exception + call spitfire_data_access_exception add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap clr %l6 - .globl __do_instruction_access_exception - .globl __do_instruction_access_exception_tl1 -__do_instruction_access_exception_tl1: + .globl __spitfire_insn_access_exception + .globl __spitfire_insn_access_exception_tl1 +__spitfire_insn_access_exception_tl1: rdpr %pstate, %g4 wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate mov TLB_SFSR, %g3 - mov DMMU_SFAR, %g5 - ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR - ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR + ldxa [%g3] ASI_IMMU, %g4 ! Get SFSR + rdpr %tpc, %g5 ! IMMU has no SFAR, use TPC stxa %g0, [%g3] ASI_IMMU ! Clear FaultValid bit membar #Sync sethi %hi(109f), %g7 @@ -743,18 +904,17 @@ __do_instruction_access_exception_tl1: 109: or %g7, %lo(109b), %g7 mov %l4, %o1 mov %l5, %o2 - call instruction_access_exception_tl1 + call spitfire_insn_access_exception_tl1 add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap clr %l6 -__do_instruction_access_exception: +__spitfire_insn_access_exception: rdpr %pstate, %g4 wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate mov TLB_SFSR, %g3 - mov DMMU_SFAR, %g5 - ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR - ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR + ldxa [%g3] ASI_IMMU, %g4 ! Get SFSR + rdpr %tpc, %g5 ! IMMU has no SFAR, use TPC stxa %g0, [%g3] ASI_IMMU ! Clear FaultValid bit membar #Sync sethi %hi(109f), %g7 @@ -762,235 +922,11 @@ __do_instruction_access_exception: 109: or %g7, %lo(109b), %g7 mov %l4, %o1 mov %l5, %o2 - call instruction_access_exception + call spitfire_insn_access_exception add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap clr %l6 - /* This is the trap handler entry point for ECC correctable - * errors. They are corrected, but we listen for the trap - * so that the event can be logged. - * - * Disrupting errors are either: - * 1) single-bit ECC errors during UDB reads to system - * memory - * 2) data parity errors during write-back events - * - * As far as I can make out from the manual, the CEE trap - * is only for correctable errors during memory read - * accesses by the front-end of the processor. - * - * The code below is only for trap level 1 CEE events, - * as it is the only situation where we can safely record - * and log. For trap level >1 we just clear the CE bit - * in the AFSR and return. - */ - - /* Our trap handling infrastructure allows us to preserve - * two 64-bit values during etrap for arguments to - * subsequent C code. Therefore we encode the information - * as follows: - * - * value 1) Full 64-bits of AFAR - * value 2) Low 33-bits of AFSR, then bits 33-->42 - * are UDBL error status and bits 43-->52 - * are UDBH error status - */ - .align 64 - .globl cee_trap -cee_trap: - ldxa [%g0] ASI_AFSR, %g1 ! Read AFSR - ldxa [%g0] ASI_AFAR, %g2 ! Read AFAR - sllx %g1, 31, %g1 ! Clear reserved bits - srlx %g1, 31, %g1 ! in AFSR - - /* NOTE: UltraSparc-I/II have high and low UDB error - * registers, corresponding to the two UDB units - * present on those chips. UltraSparc-IIi only - * has a single UDB, called "SDB" in the manual. - * For IIi the upper UDB register always reads - * as zero so for our purposes things will just - * work with the checks below. - */ - ldxa [%g0] ASI_UDBL_ERROR_R, %g3 ! Read UDB-Low error status - andcc %g3, (1 << 8), %g4 ! Check CE bit - sllx %g3, (64 - 10), %g3 ! Clear reserved bits - srlx %g3, (64 - 10), %g3 ! in UDB-Low error status - - sllx %g3, (33 + 0), %g3 ! Shift up to encoding area - or %g1, %g3, %g1 ! Or it in - be,pn %xcc, 1f ! Branch if CE bit was clear - nop - stxa %g4, [%g0] ASI_UDB_ERROR_W ! Clear CE sticky bit in UDBL - membar #Sync ! Synchronize ASI stores -1: mov 0x18, %g5 ! Addr of UDB-High error status - ldxa [%g5] ASI_UDBH_ERROR_R, %g3 ! Read it - - andcc %g3, (1 << 8), %g4 ! Check CE bit - sllx %g3, (64 - 10), %g3 ! Clear reserved bits - srlx %g3, (64 - 10), %g3 ! in UDB-High error status - sllx %g3, (33 + 10), %g3 ! Shift up to encoding area - or %g1, %g3, %g1 ! Or it in - be,pn %xcc, 1f ! Branch if CE bit was clear - nop - nop - - stxa %g4, [%g5] ASI_UDB_ERROR_W ! Clear CE sticky bit in UDBH - membar #Sync ! Synchronize ASI stores -1: mov 1, %g5 ! AFSR CE bit is - sllx %g5, 20, %g5 ! bit 20 - stxa %g5, [%g0] ASI_AFSR ! Clear CE sticky bit in AFSR - membar #Sync ! Synchronize ASI stores - sllx %g2, (64 - 41), %g2 ! Clear reserved bits - srlx %g2, (64 - 41), %g2 ! in latched AFAR - - andn %g2, 0x0f, %g2 ! Finish resv bit clearing - mov %g1, %g4 ! Move AFSR+UDB* into save reg - mov %g2, %g5 ! Move AFAR into save reg - rdpr %pil, %g2 - wrpr %g0, 15, %pil - ba,pt %xcc, etrap_irq - rd %pc, %g7 - mov %l4, %o0 - - mov %l5, %o1 - call cee_log - add %sp, PTREGS_OFF, %o2 - ba,a,pt %xcc, rtrap_irq - - /* Capture I/D/E-cache state into per-cpu error scoreboard. - * - * %g1: (TL>=0) ? 1 : 0 - * %g2: scratch - * %g3: scratch - * %g4: AFSR - * %g5: AFAR - * %g6: current thread ptr - * %g7: scratch - */ -#define CHEETAH_LOG_ERROR \ - /* Put "TL1" software bit into AFSR. */ \ - and %g1, 0x1, %g1; \ - sllx %g1, 63, %g2; \ - or %g4, %g2, %g4; \ - /* Get log entry pointer for this cpu at this trap level. */ \ - BRANCH_IF_JALAPENO(g2,g3,50f) \ - ldxa [%g0] ASI_SAFARI_CONFIG, %g2; \ - srlx %g2, 17, %g2; \ - ba,pt %xcc, 60f; \ - and %g2, 0x3ff, %g2; \ -50: ldxa [%g0] ASI_JBUS_CONFIG, %g2; \ - srlx %g2, 17, %g2; \ - and %g2, 0x1f, %g2; \ -60: sllx %g2, 9, %g2; \ - sethi %hi(cheetah_error_log), %g3; \ - ldx [%g3 + %lo(cheetah_error_log)], %g3; \ - brz,pn %g3, 80f; \ - nop; \ - add %g3, %g2, %g3; \ - sllx %g1, 8, %g1; \ - add %g3, %g1, %g1; \ - /* %g1 holds pointer to the top of the logging scoreboard */ \ - ldx [%g1 + 0x0], %g7; \ - cmp %g7, -1; \ - bne,pn %xcc, 80f; \ - nop; \ - stx %g4, [%g1 + 0x0]; \ - stx %g5, [%g1 + 0x8]; \ - add %g1, 0x10, %g1; \ - /* %g1 now points to D-cache logging area */ \ - set 0x3ff8, %g2; /* DC_addr mask */ \ - and %g5, %g2, %g2; /* DC_addr bits of AFAR */ \ - srlx %g5, 12, %g3; \ - or %g3, 1, %g3; /* PHYS tag + valid */ \ -10: ldxa [%g2] ASI_DCACHE_TAG, %g7; \ - cmp %g3, %g7; /* TAG match? */ \ - bne,pt %xcc, 13f; \ - nop; \ - /* Yep, what we want, capture state. */ \ - stx %g2, [%g1 + 0x20]; \ - stx %g7, [%g1 + 0x28]; \ - /* A membar Sync is required before and after utag access. */ \ - membar #Sync; \ - ldxa [%g2] ASI_DCACHE_UTAG, %g7; \ - membar #Sync; \ - stx %g7, [%g1 + 0x30]; \ - ldxa [%g2] ASI_DCACHE_SNOOP_TAG, %g7; \ - stx %g7, [%g1 + 0x38]; \ - clr %g3; \ -12: ldxa [%g2 + %g3] ASI_DCACHE_DATA, %g7; \ - stx %g7, [%g1]; \ - add %g3, (1 << 5), %g3; \ - cmp %g3, (4 << 5); \ - bl,pt %xcc, 12b; \ - add %g1, 0x8, %g1; \ - ba,pt %xcc, 20f; \ - add %g1, 0x20, %g1; \ -13: sethi %hi(1 << 14), %g7; \ - add %g2, %g7, %g2; \ - srlx %g2, 14, %g7; \ - cmp %g7, 4; \ - bl,pt %xcc, 10b; \ - nop; \ - add %g1, 0x40, %g1; \ -20: /* %g1 now points to I-cache logging area */ \ - set 0x1fe0, %g2; /* IC_addr mask */ \ - and %g5, %g2, %g2; /* IC_addr bits of AFAR */ \ - sllx %g2, 1, %g2; /* IC_addr[13:6]==VA[12:5] */ \ - srlx %g5, (13 - 8), %g3; /* Make PTAG */ \ - andn %g3, 0xff, %g3; /* Mask off undefined bits */ \ -21: ldxa [%g2] ASI_IC_TAG, %g7; \ - andn %g7, 0xff, %g7; \ - cmp %g3, %g7; \ - bne,pt %xcc, 23f; \ - nop; \ - /* Yep, what we want, capture state. */ \ - stx %g2, [%g1 + 0x40]; \ - stx %g7, [%g1 + 0x48]; \ - add %g2, (1 << 3), %g2; \ - ldxa [%g2] ASI_IC_TAG, %g7; \ - add %g2, (1 << 3), %g2; \ - stx %g7, [%g1 + 0x50]; \ - ldxa [%g2] ASI_IC_TAG, %g7; \ - add %g2, (1 << 3), %g2; \ - stx %g7, [%g1 + 0x60]; \ - ldxa [%g2] ASI_IC_TAG, %g7; \ - stx %g7, [%g1 + 0x68]; \ - sub %g2, (3 << 3), %g2; \ - ldxa [%g2] ASI_IC_STAG, %g7; \ - stx %g7, [%g1 + 0x58]; \ - clr %g3; \ - srlx %g2, 2, %g2; \ -22: ldxa [%g2 + %g3] ASI_IC_INSTR, %g7; \ - stx %g7, [%g1]; \ - add %g3, (1 << 3), %g3; \ - cmp %g3, (8 << 3); \ - bl,pt %xcc, 22b; \ - add %g1, 0x8, %g1; \ - ba,pt %xcc, 30f; \ - add %g1, 0x30, %g1; \ -23: sethi %hi(1 << 14), %g7; \ - add %g2, %g7, %g2; \ - srlx %g2, 14, %g7; \ - cmp %g7, 4; \ - bl,pt %xcc, 21b; \ - nop; \ - add %g1, 0x70, %g1; \ -30: /* %g1 now points to E-cache logging area */ \ - andn %g5, (32 - 1), %g2; /* E-cache subblock */ \ - stx %g2, [%g1 + 0x20]; \ - ldxa [%g2] ASI_EC_TAG_DATA, %g7; \ - stx %g7, [%g1 + 0x28]; \ - ldxa [%g2] ASI_EC_R, %g0; \ - clr %g3; \ -31: ldxa [%g3] ASI_EC_DATA, %g7; \ - stx %g7, [%g1 + %g3]; \ - add %g3, 0x8, %g3; \ - cmp %g3, 0x20; \ - bl,pt %xcc, 31b; \ - nop; \ -80: /* DONE */ - /* These get patched into the trap table at boot time * once we know we have a cheetah processor. */ @@ -1227,6 +1163,170 @@ dcpe_icpe_tl1_common: membar #Sync retry + /* Capture I/D/E-cache state into per-cpu error scoreboard. + * + * %g1: (TL>=0) ? 1 : 0 + * %g2: scratch + * %g3: scratch + * %g4: AFSR + * %g5: AFAR + * %g6: current thread ptr + * %g7: scratch + */ +__cheetah_log_error: + /* Put "TL1" software bit into AFSR. */ + and %g1, 0x1, %g1 + sllx %g1, 63, %g2 + or %g4, %g2, %g4 + + /* Get log entry pointer for this cpu at this trap level. */ + BRANCH_IF_JALAPENO(g2,g3,50f) + ldxa [%g0] ASI_SAFARI_CONFIG, %g2 + srlx %g2, 17, %g2 + ba,pt %xcc, 60f + and %g2, 0x3ff, %g2 + +50: ldxa [%g0] ASI_JBUS_CONFIG, %g2 + srlx %g2, 17, %g2 + and %g2, 0x1f, %g2 + +60: sllx %g2, 9, %g2 + sethi %hi(cheetah_error_log), %g3 + ldx [%g3 + %lo(cheetah_error_log)], %g3 + brz,pn %g3, 80f + nop + + add %g3, %g2, %g3 + sllx %g1, 8, %g1 + add %g3, %g1, %g1 + + /* %g1 holds pointer to the top of the logging scoreboard */ + ldx [%g1 + 0x0], %g7 + cmp %g7, -1 + bne,pn %xcc, 80f + nop + + stx %g4, [%g1 + 0x0] + stx %g5, [%g1 + 0x8] + add %g1, 0x10, %g1 + + /* %g1 now points to D-cache logging area */ + set 0x3ff8, %g2 /* DC_addr mask */ + and %g5, %g2, %g2 /* DC_addr bits of AFAR */ + srlx %g5, 12, %g3 + or %g3, 1, %g3 /* PHYS tag + valid */ + +10: ldxa [%g2] ASI_DCACHE_TAG, %g7 + cmp %g3, %g7 /* TAG match? */ + bne,pt %xcc, 13f + nop + + /* Yep, what we want, capture state. */ + stx %g2, [%g1 + 0x20] + stx %g7, [%g1 + 0x28] + + /* A membar Sync is required before and after utag access. */ + membar #Sync + ldxa [%g2] ASI_DCACHE_UTAG, %g7 + membar #Sync + stx %g7, [%g1 + 0x30] + ldxa [%g2] ASI_DCACHE_SNOOP_TAG, %g7 + stx %g7, [%g1 + 0x38] + clr %g3 + +12: ldxa [%g2 + %g3] ASI_DCACHE_DATA, %g7 + stx %g7, [%g1] + add %g3, (1 << 5), %g3 + cmp %g3, (4 << 5) + bl,pt %xcc, 12b + add %g1, 0x8, %g1 + + ba,pt %xcc, 20f + add %g1, 0x20, %g1 + +13: sethi %hi(1 << 14), %g7 + add %g2, %g7, %g2 + srlx %g2, 14, %g7 + cmp %g7, 4 + bl,pt %xcc, 10b + nop + + add %g1, 0x40, %g1 + + /* %g1 now points to I-cache logging area */ +20: set 0x1fe0, %g2 /* IC_addr mask */ + and %g5, %g2, %g2 /* IC_addr bits of AFAR */ + sllx %g2, 1, %g2 /* IC_addr[13:6]==VA[12:5] */ + srlx %g5, (13 - 8), %g3 /* Make PTAG */ + andn %g3, 0xff, %g3 /* Mask off undefined bits */ + +21: ldxa [%g2] ASI_IC_TAG, %g7 + andn %g7, 0xff, %g7 + cmp %g3, %g7 + bne,pt %xcc, 23f + nop + + /* Yep, what we want, capture state. */ + stx %g2, [%g1 + 0x40] + stx %g7, [%g1 + 0x48] + add %g2, (1 << 3), %g2 + ldxa [%g2] ASI_IC_TAG, %g7 + add %g2, (1 << 3), %g2 + stx %g7, [%g1 + 0x50] + ldxa [%g2] ASI_IC_TAG, %g7 + add %g2, (1 << 3), %g2 + stx %g7, [%g1 + 0x60] + ldxa [%g2] ASI_IC_TAG, %g7 + stx %g7, [%g1 + 0x68] + sub %g2, (3 << 3), %g2 + ldxa [%g2] ASI_IC_STAG, %g7 + stx %g7, [%g1 + 0x58] + clr %g3 + srlx %g2, 2, %g2 + +22: ldxa [%g2 + %g3] ASI_IC_INSTR, %g7 + stx %g7, [%g1] + add %g3, (1 << 3), %g3 + cmp %g3, (8 << 3) + bl,pt %xcc, 22b + add %g1, 0x8, %g1 + + ba,pt %xcc, 30f + add %g1, 0x30, %g1 + +23: sethi %hi(1 << 14), %g7 + add %g2, %g7, %g2 + srlx %g2, 14, %g7 + cmp %g7, 4 + bl,pt %xcc, 21b + nop + + add %g1, 0x70, %g1 + + /* %g1 now points to E-cache logging area */ +30: andn %g5, (32 - 1), %g2 + stx %g2, [%g1 + 0x20] + ldxa [%g2] ASI_EC_TAG_DATA, %g7 + stx %g7, [%g1 + 0x28] + ldxa [%g2] ASI_EC_R, %g0 + clr %g3 + +31: ldxa [%g3] ASI_EC_DATA, %g7 + stx %g7, [%g1 + %g3] + add %g3, 0x8, %g3 + cmp %g3, 0x20 + + bl,pt %xcc, 31b + nop +80: + rdpr %tt, %g2 + cmp %g2, 0x70 + be c_fast_ecc + cmp %g2, 0x63 + be c_cee + nop + ba,pt %xcc, c_deferred + /* Cheetah FECC trap handling, we get here from tl{0,1}_fecc * in the trap table. That code has done a memory barrier * and has disabled both the I-cache and D-cache in the DCU @@ -1252,8 +1352,10 @@ cheetah_fast_ecc: stxa %g4, [%g0] ASI_AFSR membar #Sync - CHEETAH_LOG_ERROR + ba,pt %xcc, __cheetah_log_error + nop +c_fast_ecc: rdpr %pil, %g2 wrpr %g0, 15, %pil ba,pt %xcc, etrap_irq @@ -1278,8 +1380,10 @@ cheetah_cee: stxa %g4, [%g0] ASI_AFSR membar #Sync - CHEETAH_LOG_ERROR + ba,pt %xcc, __cheetah_log_error + nop +c_cee: rdpr %pil, %g2 wrpr %g0, 15, %pil ba,pt %xcc, etrap_irq @@ -1304,8 +1408,10 @@ cheetah_deferred_trap: stxa %g4, [%g0] ASI_AFSR membar #Sync - CHEETAH_LOG_ERROR + ba,pt %xcc, __cheetah_log_error + nop +c_deferred: rdpr %pil, %g2 wrpr %g0, 15, %pil ba,pt %xcc, etrap_irq diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index 8104a56ca2d8..1fa06c4e3bdb 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -538,11 +538,12 @@ cheetah_tlb_fixup: nop call cheetah_plus_patch_winfixup nop - 2: /* Patch copy/page operations to cheetah optimized versions. */ call cheetah_patch_copyops nop + call cheetah_patch_copy_page + nop call cheetah_patch_cachetlbops nop diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c index bbf11f85dab1..0d66d07c8c6e 100644 --- a/arch/sparc64/kernel/kprobes.c +++ b/arch/sparc64/kernel/kprobes.c @@ -8,6 +8,7 @@ #include <linux/kprobes.h> #include <asm/kdebug.h> #include <asm/signal.h> +#include <asm/cacheflush.h> /* We do not have hardware single-stepping on sparc64. * So we implement software single-stepping with breakpoint @@ -37,31 +38,31 @@ * - Mark that we are no longer actively in a kprobe. */ -int arch_prepare_kprobe(struct kprobe *p) +int __kprobes arch_prepare_kprobe(struct kprobe *p) { return 0; } -void arch_copy_kprobe(struct kprobe *p) +void __kprobes arch_copy_kprobe(struct kprobe *p) { p->ainsn.insn[0] = *p->addr; p->ainsn.insn[1] = BREAKPOINT_INSTRUCTION_2; p->opcode = *p->addr; } -void arch_arm_kprobe(struct kprobe *p) +void __kprobes arch_arm_kprobe(struct kprobe *p) { *p->addr = BREAKPOINT_INSTRUCTION; flushi(p->addr); } -void arch_disarm_kprobe(struct kprobe *p) +void __kprobes arch_disarm_kprobe(struct kprobe *p) { *p->addr = p->opcode; flushi(p->addr); } -void arch_remove_kprobe(struct kprobe *p) +void __kprobes arch_remove_kprobe(struct kprobe *p) { } @@ -111,7 +112,7 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) } } -static int kprobe_handler(struct pt_regs *regs) +static int __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p; void *addr = (void *) regs->tpc; @@ -191,8 +192,9 @@ no_kprobe: * The original INSN location was REAL_PC, it actually * executed at PC and produced destination address NPC. */ -static unsigned long relbranch_fixup(u32 insn, unsigned long real_pc, - unsigned long pc, unsigned long npc) +static unsigned long __kprobes relbranch_fixup(u32 insn, unsigned long real_pc, + unsigned long pc, + unsigned long npc) { /* Branch not taken, no mods necessary. */ if (npc == pc + 0x4UL) @@ -217,7 +219,8 @@ static unsigned long relbranch_fixup(u32 insn, unsigned long real_pc, /* If INSN is an instruction which writes it's PC location * into a destination register, fix that up. */ -static void retpc_fixup(struct pt_regs *regs, u32 insn, unsigned long real_pc) +static void __kprobes retpc_fixup(struct pt_regs *regs, u32 insn, + unsigned long real_pc) { unsigned long *slot = NULL; @@ -257,7 +260,7 @@ static void retpc_fixup(struct pt_regs *regs, u32 insn, unsigned long real_pc) * This function prepares to return from the post-single-step * breakpoint trap. */ -static void resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) { u32 insn = p->ainsn.insn[0]; @@ -315,8 +318,8 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) /* * Wrapper routine to for handling exceptions. */ -int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, - void *data) +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; switch (val) { @@ -344,7 +347,8 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, return NOTIFY_DONE; } -asmlinkage void kprobe_trap(unsigned long trap_level, struct pt_regs *regs) +asmlinkage void __kprobes kprobe_trap(unsigned long trap_level, + struct pt_regs *regs) { BUG_ON(trap_level != 0x170 && trap_level != 0x171); @@ -368,7 +372,7 @@ static struct pt_regs jprobe_saved_regs; static struct pt_regs *jprobe_saved_regs_location; static struct sparc_stackf jprobe_saved_stack; -int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); @@ -390,7 +394,7 @@ int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) return 1; } -void jprobe_return(void) +void __kprobes jprobe_return(void) { preempt_enable_no_resched(); __asm__ __volatile__( @@ -403,7 +407,7 @@ extern void jprobe_return_trap_instruction(void); extern void __show_regs(struct pt_regs * regs); -int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { u32 *addr = (u32 *) regs->tpc; diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index f21c993f8856..2ff7c32ab0ce 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -359,134 +359,17 @@ void pcibios_fixup_bus(struct pci_bus *pbus) pbus->resource[1] = &pbm->mem_space; } -int pci_claim_resource(struct pci_dev *pdev, int resource) +struct resource *pcibios_select_root(struct pci_dev *pdev, struct resource *r) { struct pci_pbm_info *pbm = pdev->bus->sysdata; - struct resource *res = &pdev->resource[resource]; - struct resource *root; - - if (!pbm) - return -EINVAL; + struct resource *root = NULL; - if (res->flags & IORESOURCE_IO) + if (r->flags & IORESOURCE_IO) root = &pbm->io_space; - else + if (r->flags & IORESOURCE_MEM) root = &pbm->mem_space; - pbm->parent->resource_adjust(pdev, res, root); - - return request_resource(root, res); -} - -/* - * Given the PCI bus a device resides on, try to - * find an acceptable resource allocation for a - * specific device resource.. - */ -static int pci_assign_bus_resource(const struct pci_bus *bus, - struct pci_dev *dev, - struct resource *res, - unsigned long size, - unsigned long min, - int resno) -{ - unsigned int type_mask; - int i; - - type_mask = IORESOURCE_IO | IORESOURCE_MEM; - for (i = 0 ; i < 4; i++) { - struct resource *r = bus->resource[i]; - if (!r) - continue; - - /* type_mask must match */ - if ((res->flags ^ r->flags) & type_mask) - continue; - - /* Ok, try it out.. */ - if (allocate_resource(r, res, size, min, -1, size, NULL, NULL) < 0) - continue; - - /* PCI config space updated by caller. */ - return 0; - } - return -EBUSY; -} - -int pci_assign_resource(struct pci_dev *pdev, int resource) -{ - struct pcidev_cookie *pcp = pdev->sysdata; - struct pci_pbm_info *pbm = pcp->pbm; - struct resource *res = &pdev->resource[resource]; - unsigned long min, size; - int err; - - if (res->flags & IORESOURCE_IO) - min = pbm->io_space.start + 0x400UL; - else - min = pbm->mem_space.start; - - size = res->end - res->start + 1; - - err = pci_assign_bus_resource(pdev->bus, pdev, res, size, min, resource); - - if (err < 0) { - printk("PCI: Failed to allocate resource %d for %s\n", - resource, pci_name(pdev)); - } else { - /* Update PCI config space. */ - pbm->parent->base_address_update(pdev, resource); - } - - return err; -} - -/* Sort resources by alignment */ -void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head) -{ - int i; - - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - struct resource *r; - struct resource_list *list, *tmp; - unsigned long r_align; - - r = &dev->resource[i]; - r_align = r->end - r->start; - - if (!(r->flags) || r->parent) - continue; - if (!r_align) { - printk(KERN_WARNING "PCI: Ignore bogus resource %d " - "[%lx:%lx] of %s\n", - i, r->start, r->end, pci_name(dev)); - continue; - } - r_align = (i < PCI_BRIDGE_RESOURCES) ? r_align + 1 : r->start; - for (list = head; ; list = list->next) { - unsigned long align = 0; - struct resource_list *ln = list->next; - int idx; - - if (ln) { - idx = ln->res - &ln->dev->resource[0]; - align = (idx < PCI_BRIDGE_RESOURCES) ? - ln->res->end - ln->res->start + 1 : - ln->res->start; - } - if (r_align > align) { - tmp = kmalloc(sizeof(*tmp), GFP_KERNEL); - if (!tmp) - panic("pdev_sort_resources(): " - "kmalloc() failed!\n"); - tmp->next = ln; - tmp->res = r; - tmp->dev = dev; - list->next = tmp; - break; - } - } - } + return root; } void pcibios_update_irq(struct pci_dev *pdev, int irq) @@ -736,8 +619,7 @@ static void __pci_mmap_set_flags(struct pci_dev *dev, struct vm_area_struct *vma static void __pci_mmap_set_pgprot(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state) { - /* Our io_remap_page_range/io_remap_pfn_range takes care of this, - do nothing. */ + /* Our io_remap_pfn_range takes care of this, do nothing. */ } /* Perform the actual remap of the pages for a PCI device mapping, as appropriate diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c index 2803bc7c2c79..425c60cfea19 100644 --- a/arch/sparc64/kernel/pci_iommu.c +++ b/arch/sparc64/kernel/pci_iommu.c @@ -466,7 +466,7 @@ do_flush_sync: if (!limit) break; udelay(1); - membar("#LoadLoad"); + rmb(); } if (!limit) printk(KERN_WARNING "pci_strbuf_flush: flushflag timeout " diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index 91ab466d6c66..6ed1ef25e0ac 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -307,7 +307,7 @@ static unsigned char psycho_pil_table[] = { /*0x32*/15, /* Power Management */ }; -static int __init psycho_ino_to_pil(struct pci_dev *pdev, unsigned int ino) +static int psycho_ino_to_pil(struct pci_dev *pdev, unsigned int ino) { int ret; @@ -344,9 +344,9 @@ static int __init psycho_ino_to_pil(struct pci_dev *pdev, unsigned int ino) return ret; } -static unsigned int __init psycho_irq_build(struct pci_pbm_info *pbm, - struct pci_dev *pdev, - unsigned int ino) +static unsigned int psycho_irq_build(struct pci_pbm_info *pbm, + struct pci_dev *pdev, + unsigned int ino) { struct ino_bucket *bucket; unsigned long imap, iclr; @@ -1024,7 +1024,7 @@ static irqreturn_t psycho_pcierr_intr(int irq, void *dev_id, struct pt_regs *reg #define PSYCHO_CE_INO 0x2f #define PSYCHO_PCIERR_A_INO 0x30 #define PSYCHO_PCIERR_B_INO 0x31 -static void __init psycho_register_error_handlers(struct pci_controller_info *p) +static void psycho_register_error_handlers(struct pci_controller_info *p) { struct pci_pbm_info *pbm = &p->pbm_A; /* arbitrary */ unsigned long base = p->pbm_A.controller_regs; @@ -1091,15 +1091,15 @@ static void __init psycho_register_error_handlers(struct pci_controller_info *p) } /* PSYCHO boot time probing and initialization. */ -static void __init psycho_resource_adjust(struct pci_dev *pdev, - struct resource *res, - struct resource *root) +static void psycho_resource_adjust(struct pci_dev *pdev, + struct resource *res, + struct resource *root) { res->start += root->start; res->end += root->start; } -static void __init psycho_base_address_update(struct pci_dev *pdev, int resource) +static void psycho_base_address_update(struct pci_dev *pdev, int resource) { struct pcidev_cookie *pcp = pdev->sysdata; struct pci_pbm_info *pbm = pcp->pbm; @@ -1144,7 +1144,7 @@ static void __init psycho_base_address_update(struct pci_dev *pdev, int resource pci_write_config_dword(pdev, where + 4, 0); } -static void __init pbm_config_busmastering(struct pci_pbm_info *pbm) +static void pbm_config_busmastering(struct pci_pbm_info *pbm) { u8 *addr; @@ -1161,8 +1161,8 @@ static void __init pbm_config_busmastering(struct pci_pbm_info *pbm) pci_config_write8(addr, 64); } -static void __init pbm_scan_bus(struct pci_controller_info *p, - struct pci_pbm_info *pbm) +static void pbm_scan_bus(struct pci_controller_info *p, + struct pci_pbm_info *pbm) { struct pcidev_cookie *cookie = kmalloc(sizeof(*cookie), GFP_KERNEL); @@ -1189,7 +1189,7 @@ static void __init pbm_scan_bus(struct pci_controller_info *p, pci_setup_busmastering(pbm, pbm->pci_bus); } -static void __init psycho_scan_bus(struct pci_controller_info *p) +static void psycho_scan_bus(struct pci_controller_info *p) { pbm_config_busmastering(&p->pbm_B); p->pbm_B.is_66mhz_capable = 0; @@ -1204,7 +1204,7 @@ static void __init psycho_scan_bus(struct pci_controller_info *p) psycho_register_error_handlers(p); } -static void __init psycho_iommu_init(struct pci_controller_info *p) +static void psycho_iommu_init(struct pci_controller_info *p) { struct pci_iommu *iommu = p->pbm_A.iommu; unsigned long tsbbase, i; @@ -1327,8 +1327,8 @@ static void psycho_controller_hwinit(struct pci_controller_info *p) psycho_write(p->pbm_A.controller_regs + PSYCHO_PCIB_DIAG, tmp); } -static void __init pbm_register_toplevel_resources(struct pci_controller_info *p, - struct pci_pbm_info *pbm) +static void pbm_register_toplevel_resources(struct pci_controller_info *p, + struct pci_pbm_info *pbm) { char *name = pbm->name; @@ -1481,7 +1481,7 @@ static void psycho_pbm_init(struct pci_controller_info *p, #define PSYCHO_CONFIGSPACE 0x001000000UL -void __init psycho_init(int node, char *model_name) +void psycho_init(int node, char *model_name) { struct linux_prom64_registers pr_regs[3]; struct pci_controller_info *p; diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c index 52bf3431a422..0ee6bd5b9ac6 100644 --- a/arch/sparc64/kernel/pci_sabre.c +++ b/arch/sparc64/kernel/pci_sabre.c @@ -554,7 +554,7 @@ static unsigned char sabre_pil_table[] = { /*0x32*/15, /* Power Management */ }; -static int __init sabre_ino_to_pil(struct pci_dev *pdev, unsigned int ino) +static int sabre_ino_to_pil(struct pci_dev *pdev, unsigned int ino) { int ret; @@ -612,9 +612,9 @@ static void sabre_wsync_handler(struct ino_bucket *bucket, void *_arg1, void *_a sabre_read(sync_reg); } -static unsigned int __init sabre_irq_build(struct pci_pbm_info *pbm, - struct pci_dev *pdev, - unsigned int ino) +static unsigned int sabre_irq_build(struct pci_pbm_info *pbm, + struct pci_dev *pdev, + unsigned int ino) { struct ino_bucket *bucket; unsigned long imap, iclr; @@ -1009,7 +1009,7 @@ static irqreturn_t sabre_pcierr_intr(int irq, void *dev_id, struct pt_regs *regs #define SABRE_UE_INO 0x2e #define SABRE_CE_INO 0x2f #define SABRE_PCIERR_INO 0x30 -static void __init sabre_register_error_handlers(struct pci_controller_info *p) +static void sabre_register_error_handlers(struct pci_controller_info *p) { struct pci_pbm_info *pbm = &p->pbm_A; /* arbitrary */ unsigned long base = pbm->controller_regs; @@ -1056,9 +1056,9 @@ static void __init sabre_register_error_handlers(struct pci_controller_info *p) sabre_write(base + SABRE_PCICTRL, tmp); } -static void __init sabre_resource_adjust(struct pci_dev *pdev, - struct resource *res, - struct resource *root) +static void sabre_resource_adjust(struct pci_dev *pdev, + struct resource *res, + struct resource *root) { struct pci_pbm_info *pbm = pdev->bus->sysdata; unsigned long base; @@ -1072,7 +1072,7 @@ static void __init sabre_resource_adjust(struct pci_dev *pdev, res->end += base; } -static void __init sabre_base_address_update(struct pci_dev *pdev, int resource) +static void sabre_base_address_update(struct pci_dev *pdev, int resource) { struct pcidev_cookie *pcp = pdev->sysdata; struct pci_pbm_info *pbm = pcp->pbm; @@ -1118,7 +1118,7 @@ static void __init sabre_base_address_update(struct pci_dev *pdev, int resource) pci_write_config_dword(pdev, where + 4, 0); } -static void __init apb_init(struct pci_controller_info *p, struct pci_bus *sabre_bus) +static void apb_init(struct pci_controller_info *p, struct pci_bus *sabre_bus) { struct pci_dev *pdev; @@ -1181,7 +1181,7 @@ static struct pcidev_cookie *alloc_bridge_cookie(struct pci_pbm_info *pbm) return cookie; } -static void __init sabre_scan_bus(struct pci_controller_info *p) +static void sabre_scan_bus(struct pci_controller_info *p) { static int once; struct pci_bus *sabre_bus, *pbus; @@ -1262,9 +1262,9 @@ static void __init sabre_scan_bus(struct pci_controller_info *p) sabre_register_error_handlers(p); } -static void __init sabre_iommu_init(struct pci_controller_info *p, - int tsbsize, unsigned long dvma_offset, - u32 dma_mask) +static void sabre_iommu_init(struct pci_controller_info *p, + int tsbsize, unsigned long dvma_offset, + u32 dma_mask) { struct pci_iommu *iommu = p->pbm_A.iommu; unsigned long tsbbase, i, order; @@ -1345,8 +1345,8 @@ static void __init sabre_iommu_init(struct pci_controller_info *p, } } -static void __init pbm_register_toplevel_resources(struct pci_controller_info *p, - struct pci_pbm_info *pbm) +static void pbm_register_toplevel_resources(struct pci_controller_info *p, + struct pci_pbm_info *pbm) { char *name = pbm->name; unsigned long ibase = p->pbm_A.controller_regs + SABRE_IOSPACE; @@ -1415,7 +1415,7 @@ static void __init pbm_register_toplevel_resources(struct pci_controller_info *p &pbm->mem_space); } -static void __init sabre_pbm_init(struct pci_controller_info *p, int sabre_node, u32 dma_begin) +static void sabre_pbm_init(struct pci_controller_info *p, int sabre_node, u32 dma_begin) { struct pci_pbm_info *pbm; char namebuf[128]; @@ -1552,7 +1552,7 @@ static void __init sabre_pbm_init(struct pci_controller_info *p, int sabre_node, } } -void __init sabre_init(int pnode, char *model_name) +void sabre_init(int pnode, char *model_name) { struct linux_prom64_registers pr_regs[2]; struct pci_controller_info *p; diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c index 6a182bb66281..331382e1a75d 100644 --- a/arch/sparc64/kernel/pci_schizo.c +++ b/arch/sparc64/kernel/pci_schizo.c @@ -285,7 +285,7 @@ static unsigned char schizo_pil_table[] = { /*0x3f*/0, /* Reserved for NewLink */ }; -static int __init schizo_ino_to_pil(struct pci_dev *pdev, unsigned int ino) +static int schizo_ino_to_pil(struct pci_dev *pdev, unsigned int ino) { int ret; @@ -1221,7 +1221,7 @@ static irqreturn_t schizo_safarierr_intr(int irq, void *dev_id, struct pt_regs * * PCI bus units of the same Tomatillo. I still have not really * figured this out... */ -static void __init tomatillo_register_error_handlers(struct pci_controller_info *p) +static void tomatillo_register_error_handlers(struct pci_controller_info *p) { struct pci_pbm_info *pbm; unsigned int irq; @@ -1359,7 +1359,7 @@ static void __init tomatillo_register_error_handlers(struct pci_controller_info (SCHIZO_SAFIRQCTRL_EN | (BUS_ERROR_UNMAP))); } -static void __init schizo_register_error_handlers(struct pci_controller_info *p) +static void schizo_register_error_handlers(struct pci_controller_info *p) { struct pci_pbm_info *pbm; unsigned int irq; @@ -1505,7 +1505,7 @@ static void __init schizo_register_error_handlers(struct pci_controller_info *p) (SCHIZO_SAFIRQCTRL_EN | (BUS_ERROR_UNMAP))); } -static void __init pbm_config_busmastering(struct pci_pbm_info *pbm) +static void pbm_config_busmastering(struct pci_pbm_info *pbm) { u8 *addr; @@ -1522,8 +1522,8 @@ static void __init pbm_config_busmastering(struct pci_pbm_info *pbm) pci_config_write8(addr, 64); } -static void __init pbm_scan_bus(struct pci_controller_info *p, - struct pci_pbm_info *pbm) +static void pbm_scan_bus(struct pci_controller_info *p, + struct pci_pbm_info *pbm) { struct pcidev_cookie *cookie = kmalloc(sizeof(*cookie), GFP_KERNEL); @@ -1550,8 +1550,8 @@ static void __init pbm_scan_bus(struct pci_controller_info *p, pci_setup_busmastering(pbm, pbm->pci_bus); } -static void __init __schizo_scan_bus(struct pci_controller_info *p, - int chip_type) +static void __schizo_scan_bus(struct pci_controller_info *p, + int chip_type) { if (!p->pbm_B.prom_node || !p->pbm_A.prom_node) { printk("PCI: Only one PCI bus module of controller found.\n"); @@ -1577,17 +1577,17 @@ static void __init __schizo_scan_bus(struct pci_controller_info *p, schizo_register_error_handlers(p); } -static void __init schizo_scan_bus(struct pci_controller_info *p) +static void schizo_scan_bus(struct pci_controller_info *p) { __schizo_scan_bus(p, PBM_CHIP_TYPE_SCHIZO); } -static void __init tomatillo_scan_bus(struct pci_controller_info *p) +static void tomatillo_scan_bus(struct pci_controller_info *p) { __schizo_scan_bus(p, PBM_CHIP_TYPE_TOMATILLO); } -static void __init schizo_base_address_update(struct pci_dev *pdev, int resource) +static void schizo_base_address_update(struct pci_dev *pdev, int resource) { struct pcidev_cookie *pcp = pdev->sysdata; struct pci_pbm_info *pbm = pcp->pbm; @@ -1632,9 +1632,9 @@ static void __init schizo_base_address_update(struct pci_dev *pdev, int resource pci_write_config_dword(pdev, where + 4, 0); } -static void __init schizo_resource_adjust(struct pci_dev *pdev, - struct resource *res, - struct resource *root) +static void schizo_resource_adjust(struct pci_dev *pdev, + struct resource *res, + struct resource *root) { res->start += root->start; res->end += root->start; @@ -1702,8 +1702,8 @@ static void schizo_determine_mem_io_space(struct pci_pbm_info *pbm) pbm->mem_space.start); } -static void __init pbm_register_toplevel_resources(struct pci_controller_info *p, - struct pci_pbm_info *pbm) +static void pbm_register_toplevel_resources(struct pci_controller_info *p, + struct pci_pbm_info *pbm) { pbm->io_space.name = pbm->mem_space.name = pbm->name; @@ -1932,7 +1932,7 @@ static void schizo_pbm_iommu_init(struct pci_pbm_info *pbm) #define TOMATILLO_PCI_IOC_TDIAG (0x2250UL) #define TOMATILLO_PCI_IOC_DDIAG (0x2290UL) -static void __init schizo_pbm_hw_init(struct pci_pbm_info *pbm) +static void schizo_pbm_hw_init(struct pci_pbm_info *pbm) { u64 tmp; @@ -1986,9 +1986,9 @@ static void __init schizo_pbm_hw_init(struct pci_pbm_info *pbm) } } -static void __init schizo_pbm_init(struct pci_controller_info *p, - int prom_node, u32 portid, - int chip_type) +static void schizo_pbm_init(struct pci_controller_info *p, + int prom_node, u32 portid, + int chip_type) { struct linux_prom64_registers pr_regs[4]; unsigned int busrange[2]; @@ -2145,7 +2145,7 @@ static inline int portid_compare(u32 x, u32 y, int chip_type) return (x == y); } -static void __init __schizo_init(int node, char *model_name, int chip_type) +static void __schizo_init(int node, char *model_name, int chip_type) { struct pci_controller_info *p; struct pci_iommu *iommu; @@ -2213,17 +2213,17 @@ static void __init __schizo_init(int node, char *model_name, int chip_type) schizo_pbm_init(p, node, portid, chip_type); } -void __init schizo_init(int node, char *model_name) +void schizo_init(int node, char *model_name) { __schizo_init(node, model_name, PBM_CHIP_TYPE_SCHIZO); } -void __init schizo_plus_init(int node, char *model_name) +void schizo_plus_init(int node, char *model_name) { __schizo_init(node, model_name, PBM_CHIP_TYPE_SCHIZO_PLUS); } -void __init tomatillo_init(int node, char *model_name) +void tomatillo_init(int node, char *model_name) { __schizo_init(node, model_name, PBM_CHIP_TYPE_TOMATILLO); } diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index 07424b075938..7d10b0397091 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -103,7 +103,7 @@ void cpu_idle(void) * other cpus see our increasing idleness for the buddy * redistribution algorithm. -DaveM */ - membar("#StoreStore | #StoreLoad"); + membar_storeload_storestore(); } } @@ -607,11 +607,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp, struct thread_info *t = p->thread_info; char *child_trap_frame; -#ifdef CONFIG_DEBUG_SPINLOCK - p->thread.smp_lock_count = 0; - p->thread.smp_lock_pc = 0; -#endif - /* Calculate offset to stack_frame & pt_regs */ child_trap_frame = ((char *)t) + (THREAD_SIZE - (TRACEREG_SZ+STACKFRAME_SZ)); memcpy(child_trap_frame, (((struct sparc_stackf *)regs)-1), (TRACEREG_SZ+STACKFRAME_SZ)); diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index 0696ed4b9d64..fafd227735fa 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -153,11 +153,14 @@ __handle_signal: rtrap_irq: rtrap_clr_l6: clr %l6 rtrap: - ldub [%g6 + TI_CPU], %l0 - sethi %hi(irq_stat), %l2 ! &softirq_active - or %l2, %lo(irq_stat), %l2 ! &softirq_active -irqsz_patchme: sllx %l0, 0, %l0 - lduw [%l2 + %l0], %l1 ! softirq_pending +#ifndef CONFIG_SMP + sethi %hi(per_cpu____cpu_data), %l0 + lduw [%l0 + %lo(per_cpu____cpu_data)], %l1 +#else + sethi %hi(per_cpu____cpu_data), %l0 + or %l0, %lo(per_cpu____cpu_data), %l0 + lduw [%l0 + %g5], %l1 +#endif cmp %l1, 0 /* mm/ultra.S:xcall_report_regs KNOWS about this load. */ diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c index 89f5e019f24c..e09ddf927655 100644 --- a/arch/sparc64/kernel/sbus.c +++ b/arch/sparc64/kernel/sbus.c @@ -147,7 +147,7 @@ static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long if (!limit) break; udelay(1); - membar("#LoadLoad"); + rmb(); } if (!limit) printk(KERN_WARNING "sbus_strbuf_flush: flushflag timeout " diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index b7e6a91952b2..ddbed3341a23 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -33,7 +33,6 @@ #include <linux/cpu.h> #include <linux/initrd.h> -#include <asm/segment.h> #include <asm/system.h> #include <asm/io.h> #include <asm/processor.h> @@ -512,18 +511,6 @@ void __init setup_arch(char **cmdline_p) conswitchp = &prom_con; #endif -#ifdef CONFIG_SMP - i = (unsigned long)&irq_stat[1] - (unsigned long)&irq_stat[0]; - if ((i == SMP_CACHE_BYTES) || (i == (2 * SMP_CACHE_BYTES))) { - extern unsigned int irqsz_patchme[1]; - irqsz_patchme[0] |= ((i == SMP_CACHE_BYTES) ? SMP_CACHE_BYTES_SHIFT : \ - SMP_CACHE_BYTES_SHIFT + 1); - flushi((long)&irqsz_patchme[0]); - } else { - prom_printf("Unexpected size of irq_stat[] elements\n"); - prom_halt(); - } -#endif /* Work out if we are starfire early on */ check_if_starfire(); diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c index b27934671c35..60f5dfabb1e1 100644 --- a/arch/sparc64/kernel/signal.c +++ b/arch/sparc64/kernel/signal.c @@ -574,13 +574,12 @@ static inline void handle_signal(unsigned long signr, struct k_sigaction *ka, { setup_rt_frame(ka, regs, signr, oldset, (ka->sa.sa_flags & SA_SIGINFO) ? info : NULL); - if (!(ka->sa.sa_flags & SA_NOMASK)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NOMASK)) sigaddset(¤t->blocked,signr); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); } static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs, diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c index f28428f4170e..aecccd0df1d1 100644 --- a/arch/sparc64/kernel/signal32.c +++ b/arch/sparc64/kernel/signal32.c @@ -877,11 +877,12 @@ static void new_setup_frame32(struct k_sigaction *ka, struct pt_regs *regs, unsigned long page = (unsigned long) page_address(pte_page(*ptep)); - __asm__ __volatile__( - " membar #StoreStore\n" - " flush %0 + %1" - : : "r" (page), "r" (address & (PAGE_SIZE - 1)) - : "memory"); + wmb(); + __asm__ __volatile__("flush %0 + %1" + : /* no outputs */ + : "r" (page), + "r" (address & (PAGE_SIZE - 1)) + : "memory"); } pte_unmap(ptep); preempt_enable(); @@ -1292,11 +1293,12 @@ static void setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs, unsigned long page = (unsigned long) page_address(pte_page(*ptep)); - __asm__ __volatile__( - " membar #StoreStore\n" - " flush %0 + %1" - : : "r" (page), "r" (address & (PAGE_SIZE - 1)) - : "memory"); + wmb(); + __asm__ __volatile__("flush %0 + %1" + : /* no outputs */ + : "r" (page), + "r" (address & (PAGE_SIZE - 1)) + : "memory"); } pte_unmap(ptep); preempt_enable(); @@ -1325,13 +1327,12 @@ static inline void handle_signal32(unsigned long signr, struct k_sigaction *ka, else setup_frame32(&ka->sa, regs, signr, oldset, info); } - if (!(ka->sa.sa_flags & SA_NOMASK)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NOMASK)) sigaddset(¤t->blocked,signr); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); } static inline void syscall_restart32(unsigned long orig_i0, struct pt_regs *regs, diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index b9b42491e118..b4fc6a5462b2 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -144,7 +144,7 @@ void __init smp_callin(void) current->active_mm = &init_mm; while (!cpu_isset(cpuid, smp_commenced_mask)) - membar("#LoadLoad"); + rmb(); cpu_set(cpuid, cpu_online_map); } @@ -184,11 +184,11 @@ static inline long get_delta (long *rt, long *master) for (i = 0; i < NUM_ITERS; i++) { t0 = tick_ops->get_tick(); go[MASTER] = 1; - membar("#StoreLoad"); + membar_storeload(); while (!(tm = go[SLAVE])) - membar("#LoadLoad"); + rmb(); go[SLAVE] = 0; - membar("#StoreStore"); + wmb(); t1 = tick_ops->get_tick(); if (t1 - t0 < best_t1 - best_t0) @@ -221,7 +221,7 @@ void smp_synchronize_tick_client(void) go[MASTER] = 1; while (go[MASTER]) - membar("#LoadLoad"); + rmb(); local_irq_save(flags); { @@ -273,21 +273,21 @@ static void smp_synchronize_one_tick(int cpu) /* wait for client to be ready */ while (!go[MASTER]) - membar("#LoadLoad"); + rmb(); /* now let the client proceed into his loop */ go[MASTER] = 0; - membar("#StoreLoad"); + membar_storeload(); spin_lock_irqsave(&itc_sync_lock, flags); { for (i = 0; i < NUM_ROUNDS*NUM_ITERS; i++) { while (!go[MASTER]) - membar("#LoadLoad"); + rmb(); go[MASTER] = 0; - membar("#StoreStore"); + wmb(); go[SLAVE] = tick_ops->get_tick(); - membar("#StoreLoad"); + membar_storeload(); } } spin_unlock_irqrestore(&itc_sync_lock, flags); @@ -927,11 +927,11 @@ void smp_capture(void) smp_processor_id()); #endif penguins_are_doing_time = 1; - membar("#StoreStore | #LoadStore"); + membar_storestore_loadstore(); atomic_inc(&smp_capture_registry); smp_cross_call(&xcall_capture, 0, 0, 0); while (atomic_read(&smp_capture_registry) != ncpus) - membar("#LoadLoad"); + rmb(); #ifdef CAPTURE_DEBUG printk("done\n"); #endif @@ -947,7 +947,7 @@ void smp_release(void) smp_processor_id()); #endif penguins_are_doing_time = 0; - membar("#StoreStore | #StoreLoad"); + membar_storeload_storestore(); atomic_dec(&smp_capture_registry); } } @@ -970,9 +970,9 @@ void smp_penguin_jailcell(int irq, struct pt_regs *regs) save_alternate_globals(global_save); prom_world(1); atomic_inc(&smp_capture_registry); - membar("#StoreLoad | #StoreStore"); + membar_storeload_storestore(); while (penguins_are_doing_time) - membar("#LoadLoad"); + rmb(); restore_alternate_globals(global_save); atomic_dec(&smp_capture_registry); prom_world(0); diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index 9202d925a9ce..cbb5e59824e5 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -88,8 +88,6 @@ extern int svr4_setcontext(svr4_ucontext_t *uc, struct pt_regs *regs); extern int compat_sys_ioctl(unsigned int fd, unsigned int cmd, u32 arg); extern int (*handle_mathemu)(struct pt_regs *, struct fpustate *); extern long sparc32_open(const char __user * filename, int flags, int mode); -extern int io_remap_page_range(struct vm_area_struct *vma, unsigned long from, - unsigned long offset, unsigned long size, pgprot_t prot, int space); extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot); extern void (*prom_palette)(int); @@ -99,17 +97,6 @@ extern int __ashrdi3(int, int); extern void dump_thread(struct pt_regs *, struct user *); extern int dump_fpu (struct pt_regs * regs, elf_fpregset_t * fpregs); -#if defined(CONFIG_SMP) && defined(CONFIG_DEBUG_SPINLOCK) -extern void _do_spin_lock (spinlock_t *lock, char *str); -extern void _do_spin_unlock (spinlock_t *lock); -extern int _spin_trylock (spinlock_t *lock); -extern void _do_read_lock(rwlock_t *rw, char *str); -extern void _do_read_unlock(rwlock_t *rw, char *str); -extern void _do_write_lock(rwlock_t *rw, char *str); -extern void _do_write_unlock(rwlock_t *rw); -extern int _do_write_trylock(rwlock_t *rw, char *str); -#endif - extern unsigned long phys_base; extern unsigned long pfn_base; @@ -128,17 +115,12 @@ EXPORT_PER_CPU_SYMBOL(__cpu_data); /* used by various drivers */ #ifdef CONFIG_SMP -#ifndef CONFIG_DEBUG_SPINLOCK /* Out of line rw-locking implementation. */ EXPORT_SYMBOL(__read_lock); EXPORT_SYMBOL(__read_unlock); EXPORT_SYMBOL(__write_lock); EXPORT_SYMBOL(__write_unlock); EXPORT_SYMBOL(__write_trylock); -/* Out of line spin-locking implementation. */ -EXPORT_SYMBOL(_raw_spin_lock); -EXPORT_SYMBOL(_raw_spin_lock_flags); -#endif /* Hard IRQ locking */ EXPORT_SYMBOL(synchronize_irq); @@ -152,18 +134,6 @@ EXPORT_SYMBOL(_mcount); EXPORT_SYMBOL(cpu_online_map); EXPORT_SYMBOL(phys_cpu_present_map); -/* Spinlock debugging library, optional. */ -#ifdef CONFIG_DEBUG_SPINLOCK -EXPORT_SYMBOL(_do_spin_lock); -EXPORT_SYMBOL(_do_spin_unlock); -EXPORT_SYMBOL(_spin_trylock); -EXPORT_SYMBOL(_do_read_lock); -EXPORT_SYMBOL(_do_read_unlock); -EXPORT_SYMBOL(_do_write_lock); -EXPORT_SYMBOL(_do_write_unlock); -EXPORT_SYMBOL(_do_write_trylock); -#endif - EXPORT_SYMBOL(smp_call_function); #endif /* CONFIG_SMP */ @@ -268,7 +238,6 @@ EXPORT_SYMBOL(pci_dma_supported); #endif /* I/O device mmaping on Sparc64. */ -EXPORT_SYMBOL(io_remap_page_range); EXPORT_SYMBOL(io_remap_pfn_range); /* Solaris/SunOS binary compatibility */ diff --git a/arch/sparc64/kernel/sunos_ioctl32.c b/arch/sparc64/kernel/sunos_ioctl32.c index 87c1aeb02220..7654b8a7f03a 100644 --- a/arch/sparc64/kernel/sunos_ioctl32.c +++ b/arch/sparc64/kernel/sunos_ioctl32.c @@ -152,11 +152,12 @@ asmlinkage int sunos_ioctl (int fd, u32 cmd, u32 arg) ret = compat_sys_ioctl(fd, SIOCGIFCONF, arg); goto out; - case _IOW('i', 21, struct ifreq): /* SIOCSIFMTU */ - ret = sys_ioctl(fd, SIOCSIFMTU, arg); + case _IOW('i', 21, struct ifreq32): + ret = compat_sys_ioctl(fd, SIOCSIFMTU, arg); goto out; - case _IOWR('i', 22, struct ifreq): /* SIOCGIFMTU */ - ret = sys_ioctl(fd, SIOCGIFMTU, arg); + + case _IOWR('i', 22, struct ifreq32): + ret = compat_sys_ioctl(fd, SIOCGIFMTU, arg); goto out; case _IOWR('i', 23, struct ifreq32): diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c index 1d3aa588df8a..7f6239ed2521 100644 --- a/arch/sparc64/kernel/sys_sparc32.c +++ b/arch/sparc64/kernel/sys_sparc32.c @@ -1002,29 +1002,7 @@ asmlinkage long sys32_adjtimex(struct timex32 __user *utp) asmlinkage long sparc32_open(const char __user *filename, int flags, int mode) { - char * tmp; - int fd, error; - - tmp = getname(filename); - fd = PTR_ERR(tmp); - if (!IS_ERR(tmp)) { - fd = get_unused_fd(); - if (fd >= 0) { - struct file * f = filp_open(tmp, flags, mode); - error = PTR_ERR(f); - if (IS_ERR(f)) - goto out_error; - fd_install(fd, f); - } -out: - putname(tmp); - } - return fd; - -out_error: - put_unused_fd(fd); - fd = error; - goto out; + return do_sys_open(filename, flags, mode); } extern unsigned long do_mremap(unsigned long addr, diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index 362b9c26871b..3f08a32f51a1 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -449,7 +449,7 @@ static inline void timer_check_rtc(void) static long last_rtc_update; /* Determine when to update the Mostek clock. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 0c9e54b2f0c8..b280b2ef674f 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -33,6 +33,7 @@ #include <asm/dcu.h> #include <asm/estate.h> #include <asm/chafsr.h> +#include <asm/sfafsr.h> #include <asm/psrcompat.h> #include <asm/processor.h> #include <asm/timer.h> @@ -143,8 +144,7 @@ void do_BUG(const char *file, int line) } #endif -void instruction_access_exception(struct pt_regs *regs, - unsigned long sfsr, unsigned long sfar) +void spitfire_insn_access_exception(struct pt_regs *regs, unsigned long sfsr, unsigned long sfar) { siginfo_t info; @@ -153,8 +153,8 @@ void instruction_access_exception(struct pt_regs *regs, return; if (regs->tstate & TSTATE_PRIV) { - printk("instruction_access_exception: SFSR[%016lx] SFAR[%016lx], going.\n", - sfsr, sfar); + printk("spitfire_insn_access_exception: SFSR[%016lx] " + "SFAR[%016lx], going.\n", sfsr, sfar); die_if_kernel("Iax", regs); } if (test_thread_flag(TIF_32BIT)) { @@ -169,19 +169,17 @@ void instruction_access_exception(struct pt_regs *regs, force_sig_info(SIGSEGV, &info, current); } -void instruction_access_exception_tl1(struct pt_regs *regs, - unsigned long sfsr, unsigned long sfar) +void spitfire_insn_access_exception_tl1(struct pt_regs *regs, unsigned long sfsr, unsigned long sfar) { if (notify_die(DIE_TRAP_TL1, "instruction access exception tl1", regs, 0, 0x8, SIGTRAP) == NOTIFY_STOP) return; dump_tl1_traplog((struct tl1_traplog *)(regs + 1)); - instruction_access_exception(regs, sfsr, sfar); + spitfire_insn_access_exception(regs, sfsr, sfar); } -void data_access_exception(struct pt_regs *regs, - unsigned long sfsr, unsigned long sfar) +void spitfire_data_access_exception(struct pt_regs *regs, unsigned long sfsr, unsigned long sfar) { siginfo_t info; @@ -207,8 +205,8 @@ void data_access_exception(struct pt_regs *regs, return; } /* Shit... */ - printk("data_access_exception: SFSR[%016lx] SFAR[%016lx], going.\n", - sfsr, sfar); + printk("spitfire_data_access_exception: SFSR[%016lx] " + "SFAR[%016lx], going.\n", sfsr, sfar); die_if_kernel("Dax", regs); } @@ -220,6 +218,16 @@ void data_access_exception(struct pt_regs *regs, force_sig_info(SIGSEGV, &info, current); } +void spitfire_data_access_exception_tl1(struct pt_regs *regs, unsigned long sfsr, unsigned long sfar) +{ + if (notify_die(DIE_TRAP_TL1, "data access exception tl1", regs, + 0, 0x30, SIGTRAP) == NOTIFY_STOP) + return; + + dump_tl1_traplog((struct tl1_traplog *)(regs + 1)); + spitfire_data_access_exception(regs, sfsr, sfar); +} + #ifdef CONFIG_PCI /* This is really pathetic... */ extern volatile int pci_poke_in_progress; @@ -253,54 +261,13 @@ static void spitfire_clean_and_reenable_l1_caches(void) : "memory"); } -void do_iae(struct pt_regs *regs) +static void spitfire_enable_estate_errors(void) { - siginfo_t info; - - spitfire_clean_and_reenable_l1_caches(); - - if (notify_die(DIE_TRAP, "instruction access exception", regs, - 0, 0x8, SIGTRAP) == NOTIFY_STOP) - return; - - info.si_signo = SIGBUS; - info.si_errno = 0; - info.si_code = BUS_OBJERR; - info.si_addr = (void *)0; - info.si_trapno = 0; - force_sig_info(SIGBUS, &info, current); -} - -void do_dae(struct pt_regs *regs) -{ - siginfo_t info; - -#ifdef CONFIG_PCI - if (pci_poke_in_progress && pci_poke_cpu == smp_processor_id()) { - spitfire_clean_and_reenable_l1_caches(); - - pci_poke_faulted = 1; - - /* Why the fuck did they have to change this? */ - if (tlb_type == cheetah || tlb_type == cheetah_plus) - regs->tpc += 4; - - regs->tnpc = regs->tpc + 4; - return; - } -#endif - spitfire_clean_and_reenable_l1_caches(); - - if (notify_die(DIE_TRAP, "data access exception", regs, - 0, 0x30, SIGTRAP) == NOTIFY_STOP) - return; - - info.si_signo = SIGBUS; - info.si_errno = 0; - info.si_code = BUS_OBJERR; - info.si_addr = (void *)0; - info.si_trapno = 0; - force_sig_info(SIGBUS, &info, current); + __asm__ __volatile__("stxa %0, [%%g0] %1\n\t" + "membar #Sync" + : /* no outputs */ + : "r" (ESTATE_ERR_ALL), + "i" (ASI_ESTATE_ERROR_EN)); } static char ecc_syndrome_table[] = { @@ -338,65 +305,15 @@ static char ecc_syndrome_table[] = { 0x0b, 0x48, 0x48, 0x4b, 0x48, 0x4b, 0x4b, 0x4a }; -/* cee_trap in entry.S encodes AFSR/UDBH/UDBL error status - * in the following format. The AFAR is left as is, with - * reserved bits cleared, and is a raw 40-bit physical - * address. - */ -#define CE_STATUS_UDBH_UE (1UL << (43 + 9)) -#define CE_STATUS_UDBH_CE (1UL << (43 + 8)) -#define CE_STATUS_UDBH_ESYNDR (0xffUL << 43) -#define CE_STATUS_UDBH_SHIFT 43 -#define CE_STATUS_UDBL_UE (1UL << (33 + 9)) -#define CE_STATUS_UDBL_CE (1UL << (33 + 8)) -#define CE_STATUS_UDBL_ESYNDR (0xffUL << 33) -#define CE_STATUS_UDBL_SHIFT 33 -#define CE_STATUS_AFSR_MASK (0x1ffffffffUL) -#define CE_STATUS_AFSR_ME (1UL << 32) -#define CE_STATUS_AFSR_PRIV (1UL << 31) -#define CE_STATUS_AFSR_ISAP (1UL << 30) -#define CE_STATUS_AFSR_ETP (1UL << 29) -#define CE_STATUS_AFSR_IVUE (1UL << 28) -#define CE_STATUS_AFSR_TO (1UL << 27) -#define CE_STATUS_AFSR_BERR (1UL << 26) -#define CE_STATUS_AFSR_LDP (1UL << 25) -#define CE_STATUS_AFSR_CP (1UL << 24) -#define CE_STATUS_AFSR_WP (1UL << 23) -#define CE_STATUS_AFSR_EDP (1UL << 22) -#define CE_STATUS_AFSR_UE (1UL << 21) -#define CE_STATUS_AFSR_CE (1UL << 20) -#define CE_STATUS_AFSR_ETS (0xfUL << 16) -#define CE_STATUS_AFSR_ETS_SHIFT 16 -#define CE_STATUS_AFSR_PSYND (0xffffUL << 0) -#define CE_STATUS_AFSR_PSYND_SHIFT 0 - -/* Layout of Ecache TAG Parity Syndrome of AFSR */ -#define AFSR_ETSYNDROME_7_0 0x1UL /* E$-tag bus bits <7:0> */ -#define AFSR_ETSYNDROME_15_8 0x2UL /* E$-tag bus bits <15:8> */ -#define AFSR_ETSYNDROME_21_16 0x4UL /* E$-tag bus bits <21:16> */ -#define AFSR_ETSYNDROME_24_22 0x8UL /* E$-tag bus bits <24:22> */ - static char *syndrome_unknown = "<Unknown>"; -asmlinkage void cee_log(unsigned long ce_status, - unsigned long afar, - struct pt_regs *regs) +static void spitfire_log_udb_syndrome(unsigned long afar, unsigned long udbh, unsigned long udbl, unsigned long bit) { - char memmod_str[64]; - char *p; - unsigned short scode, udb_reg; + unsigned short scode; + char memmod_str[64], *p; - printk(KERN_WARNING "CPU[%d]: Correctable ECC Error " - "AFSR[%lx] AFAR[%016lx] UDBL[%lx] UDBH[%lx]\n", - smp_processor_id(), - (ce_status & CE_STATUS_AFSR_MASK), - afar, - ((ce_status >> CE_STATUS_UDBL_SHIFT) & 0x3ffUL), - ((ce_status >> CE_STATUS_UDBH_SHIFT) & 0x3ffUL)); - - udb_reg = ((ce_status >> CE_STATUS_UDBL_SHIFT) & 0x3ffUL); - if (udb_reg & (1 << 8)) { - scode = ecc_syndrome_table[udb_reg & 0xff]; + if (udbl & bit) { + scode = ecc_syndrome_table[udbl & 0xff]; if (prom_getunumber(scode, afar, memmod_str, sizeof(memmod_str)) == -1) p = syndrome_unknown; @@ -407,9 +324,8 @@ asmlinkage void cee_log(unsigned long ce_status, smp_processor_id(), scode, p); } - udb_reg = ((ce_status >> CE_STATUS_UDBH_SHIFT) & 0x3ffUL); - if (udb_reg & (1 << 8)) { - scode = ecc_syndrome_table[udb_reg & 0xff]; + if (udbh & bit) { + scode = ecc_syndrome_table[udbh & 0xff]; if (prom_getunumber(scode, afar, memmod_str, sizeof(memmod_str)) == -1) p = syndrome_unknown; @@ -419,6 +335,127 @@ asmlinkage void cee_log(unsigned long ce_status, "Memory Module \"%s\"\n", smp_processor_id(), scode, p); } + +} + +static void spitfire_cee_log(unsigned long afsr, unsigned long afar, unsigned long udbh, unsigned long udbl, int tl1, struct pt_regs *regs) +{ + + printk(KERN_WARNING "CPU[%d]: Correctable ECC Error " + "AFSR[%lx] AFAR[%016lx] UDBL[%lx] UDBH[%lx] TL>1[%d]\n", + smp_processor_id(), afsr, afar, udbl, udbh, tl1); + + spitfire_log_udb_syndrome(afar, udbh, udbl, UDBE_CE); + + /* We always log it, even if someone is listening for this + * trap. + */ + notify_die(DIE_TRAP, "Correctable ECC Error", regs, + 0, TRAP_TYPE_CEE, SIGTRAP); + + /* The Correctable ECC Error trap does not disable I/D caches. So + * we only have to restore the ESTATE Error Enable register. + */ + spitfire_enable_estate_errors(); +} + +static void spitfire_ue_log(unsigned long afsr, unsigned long afar, unsigned long udbh, unsigned long udbl, unsigned long tt, int tl1, struct pt_regs *regs) +{ + siginfo_t info; + + printk(KERN_WARNING "CPU[%d]: Uncorrectable Error AFSR[%lx] " + "AFAR[%lx] UDBL[%lx] UDBH[%ld] TT[%lx] TL>1[%d]\n", + smp_processor_id(), afsr, afar, udbl, udbh, tt, tl1); + + /* XXX add more human friendly logging of the error status + * XXX as is implemented for cheetah + */ + + spitfire_log_udb_syndrome(afar, udbh, udbl, UDBE_UE); + + /* We always log it, even if someone is listening for this + * trap. + */ + notify_die(DIE_TRAP, "Uncorrectable Error", regs, + 0, tt, SIGTRAP); + + if (regs->tstate & TSTATE_PRIV) { + if (tl1) + dump_tl1_traplog((struct tl1_traplog *)(regs + 1)); + die_if_kernel("UE", regs); + } + + /* XXX need more intelligent processing here, such as is implemented + * XXX for cheetah errors, in fact if the E-cache still holds the + * XXX line with bad parity this will loop + */ + + spitfire_clean_and_reenable_l1_caches(); + spitfire_enable_estate_errors(); + + if (test_thread_flag(TIF_32BIT)) { + regs->tpc &= 0xffffffff; + regs->tnpc &= 0xffffffff; + } + info.si_signo = SIGBUS; + info.si_errno = 0; + info.si_code = BUS_OBJERR; + info.si_addr = (void *)0; + info.si_trapno = 0; + force_sig_info(SIGBUS, &info, current); +} + +void spitfire_access_error(struct pt_regs *regs, unsigned long status_encoded, unsigned long afar) +{ + unsigned long afsr, tt, udbh, udbl; + int tl1; + + afsr = (status_encoded & SFSTAT_AFSR_MASK) >> SFSTAT_AFSR_SHIFT; + tt = (status_encoded & SFSTAT_TRAP_TYPE) >> SFSTAT_TRAP_TYPE_SHIFT; + tl1 = (status_encoded & SFSTAT_TL_GT_ONE) ? 1 : 0; + udbl = (status_encoded & SFSTAT_UDBL_MASK) >> SFSTAT_UDBL_SHIFT; + udbh = (status_encoded & SFSTAT_UDBH_MASK) >> SFSTAT_UDBH_SHIFT; + +#ifdef CONFIG_PCI + if (tt == TRAP_TYPE_DAE && + pci_poke_in_progress && pci_poke_cpu == smp_processor_id()) { + spitfire_clean_and_reenable_l1_caches(); + spitfire_enable_estate_errors(); + + pci_poke_faulted = 1; + regs->tnpc = regs->tpc + 4; + return; + } +#endif + + if (afsr & SFAFSR_UE) + spitfire_ue_log(afsr, afar, udbh, udbl, tt, tl1, regs); + + if (tt == TRAP_TYPE_CEE) { + /* Handle the case where we took a CEE trap, but ACK'd + * only the UE state in the UDB error registers. + */ + if (afsr & SFAFSR_UE) { + if (udbh & UDBE_CE) { + __asm__ __volatile__( + "stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* no outputs */ + : "r" (udbh & UDBE_CE), + "r" (0x0), "i" (ASI_UDB_ERROR_W)); + } + if (udbl & UDBE_CE) { + __asm__ __volatile__( + "stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* no outputs */ + : "r" (udbl & UDBE_CE), + "r" (0x18), "i" (ASI_UDB_ERROR_W)); + } + } + + spitfire_cee_log(afsr, afar, udbh, udbl, tl1, regs); + } } int cheetah_pcache_forced_on; diff --git a/arch/sparc64/kernel/ttable.S b/arch/sparc64/kernel/ttable.S index 491bb3681f9d..8365bc1f81f3 100644 --- a/arch/sparc64/kernel/ttable.S +++ b/arch/sparc64/kernel/ttable.S @@ -18,9 +18,10 @@ sparc64_ttable_tl0: tl0_resv000: BOOT_KERNEL BTRAP(0x1) BTRAP(0x2) BTRAP(0x3) tl0_resv004: BTRAP(0x4) BTRAP(0x5) BTRAP(0x6) BTRAP(0x7) tl0_iax: membar #Sync - TRAP_NOSAVE_7INSNS(__do_instruction_access_exception) + TRAP_NOSAVE_7INSNS(__spitfire_insn_access_exception) tl0_resv009: BTRAP(0x9) -tl0_iae: TRAP(do_iae) +tl0_iae: membar #Sync + TRAP_NOSAVE_7INSNS(__spitfire_access_error) tl0_resv00b: BTRAP(0xb) BTRAP(0xc) BTRAP(0xd) BTRAP(0xe) BTRAP(0xf) tl0_ill: membar #Sync TRAP_7INSNS(do_illegal_instruction) @@ -36,9 +37,10 @@ tl0_cwin: CLEAN_WINDOW tl0_div0: TRAP(do_div0) tl0_resv029: BTRAP(0x29) BTRAP(0x2a) BTRAP(0x2b) BTRAP(0x2c) BTRAP(0x2d) BTRAP(0x2e) tl0_resv02f: BTRAP(0x2f) -tl0_dax: TRAP_NOSAVE(__do_data_access_exception) +tl0_dax: TRAP_NOSAVE(__spitfire_data_access_exception) tl0_resv031: BTRAP(0x31) -tl0_dae: TRAP(do_dae) +tl0_dae: membar #Sync + TRAP_NOSAVE_7INSNS(__spitfire_access_error) tl0_resv033: BTRAP(0x33) tl0_mna: TRAP_NOSAVE(do_mna) tl0_lddfmna: TRAP_NOSAVE(do_lddfmna) @@ -73,7 +75,8 @@ tl0_resv05c: BTRAP(0x5c) BTRAP(0x5d) BTRAP(0x5e) BTRAP(0x5f) tl0_ivec: TRAP_IVEC tl0_paw: TRAP(do_paw) tl0_vaw: TRAP(do_vaw) -tl0_cee: TRAP_NOSAVE(cee_trap) +tl0_cee: membar #Sync + TRAP_NOSAVE_7INSNS(__spitfire_cee_trap) tl0_iamiss: #include "itlb_base.S" tl0_damiss: @@ -175,9 +178,10 @@ tl0_resv1f0: BTRAPS(0x1f0) BTRAPS(0x1f8) sparc64_ttable_tl1: tl1_resv000: BOOT_KERNEL BTRAPTL1(0x1) BTRAPTL1(0x2) BTRAPTL1(0x3) tl1_resv004: BTRAPTL1(0x4) BTRAPTL1(0x5) BTRAPTL1(0x6) BTRAPTL1(0x7) -tl1_iax: TRAP_NOSAVE(__do_instruction_access_exception_tl1) +tl1_iax: TRAP_NOSAVE(__spitfire_insn_access_exception_tl1) tl1_resv009: BTRAPTL1(0x9) -tl1_iae: TRAPTL1(do_iae_tl1) +tl1_iae: membar #Sync + TRAP_NOSAVE_7INSNS(__spitfire_access_error) tl1_resv00b: BTRAPTL1(0xb) BTRAPTL1(0xc) BTRAPTL1(0xd) BTRAPTL1(0xe) BTRAPTL1(0xf) tl1_ill: TRAPTL1(do_ill_tl1) tl1_privop: BTRAPTL1(0x11) @@ -193,9 +197,10 @@ tl1_cwin: CLEAN_WINDOW tl1_div0: TRAPTL1(do_div0_tl1) tl1_resv029: BTRAPTL1(0x29) BTRAPTL1(0x2a) BTRAPTL1(0x2b) BTRAPTL1(0x2c) tl1_resv02d: BTRAPTL1(0x2d) BTRAPTL1(0x2e) BTRAPTL1(0x2f) -tl1_dax: TRAP_NOSAVE(__do_data_access_exception_tl1) +tl1_dax: TRAP_NOSAVE(__spitfire_data_access_exception_tl1) tl1_resv031: BTRAPTL1(0x31) -tl1_dae: TRAPTL1(do_dae_tl1) +tl1_dae: membar #Sync + TRAP_NOSAVE_7INSNS(__spitfire_access_error) tl1_resv033: BTRAPTL1(0x33) tl1_mna: TRAP_NOSAVE(do_mna) tl1_lddfmna: TRAPTL1(do_lddfmna_tl1) @@ -219,8 +224,8 @@ tl1_paw: TRAPTL1(do_paw_tl1) tl1_vaw: TRAPTL1(do_vaw_tl1) /* The grotty trick to save %g1 into current->thread.cee_stuff - * is because when we take this trap we could be interrupting trap - * code already using the trap alternate global registers. + * is because when we take this trap we could be interrupting + * trap code already using the trap alternate global registers. * * We cross our fingers and pray that this store/load does * not cause yet another CEE trap. diff --git a/arch/sparc64/kernel/unaligned.c b/arch/sparc64/kernel/unaligned.c index 11c3e88732e4..da9739f0d437 100644 --- a/arch/sparc64/kernel/unaligned.c +++ b/arch/sparc64/kernel/unaligned.c @@ -349,9 +349,9 @@ int handle_popc(u32 insn, struct pt_regs *regs) extern void do_fpother(struct pt_regs *regs); extern void do_privact(struct pt_regs *regs); -extern void data_access_exception(struct pt_regs *regs, - unsigned long sfsr, - unsigned long sfar); +extern void spitfire_data_access_exception(struct pt_regs *regs, + unsigned long sfsr, + unsigned long sfar); int handle_ldf_stq(u32 insn, struct pt_regs *regs) { @@ -394,14 +394,14 @@ int handle_ldf_stq(u32 insn, struct pt_regs *regs) break; } default: - data_access_exception(regs, 0, addr); + spitfire_data_access_exception(regs, 0, addr); return 1; } if (put_user (first >> 32, (u32 __user *)addr) || __put_user ((u32)first, (u32 __user *)(addr + 4)) || __put_user (second >> 32, (u32 __user *)(addr + 8)) || __put_user ((u32)second, (u32 __user *)(addr + 12))) { - data_access_exception(regs, 0, addr); + spitfire_data_access_exception(regs, 0, addr); return 1; } } else { @@ -414,7 +414,7 @@ int handle_ldf_stq(u32 insn, struct pt_regs *regs) do_privact(regs); return 1; } else if (asi > ASI_SNFL) { - data_access_exception(regs, 0, addr); + spitfire_data_access_exception(regs, 0, addr); return 1; } switch (insn & 0x180000) { @@ -431,7 +431,7 @@ int handle_ldf_stq(u32 insn, struct pt_regs *regs) err |= __get_user (data[i], (u32 __user *)(addr + 4*i)); } if (err && !(asi & 0x2 /* NF */)) { - data_access_exception(regs, 0, addr); + spitfire_data_access_exception(regs, 0, addr); return 1; } if (asi & 0x8) /* Little */ { @@ -534,7 +534,7 @@ void handle_lddfmna(struct pt_regs *regs, unsigned long sfar, unsigned long sfsr *(u64 *)(f->regs + freg) = value; current_thread_info()->fpsaved[0] |= flag; } else { -daex: data_access_exception(regs, sfsr, sfar); +daex: spitfire_data_access_exception(regs, sfsr, sfar); return; } advance(regs); @@ -578,7 +578,7 @@ void handle_stdfmna(struct pt_regs *regs, unsigned long sfar, unsigned long sfsr __put_user ((u32)value, (u32 __user *)(sfar + 4))) goto daex; } else { -daex: data_access_exception(regs, sfsr, sfar); +daex: spitfire_data_access_exception(regs, sfsr, sfar); return; } advance(regs); diff --git a/arch/sparc64/kernel/vmlinux.lds.S b/arch/sparc64/kernel/vmlinux.lds.S index 950423da8a6a..f47d0be39378 100644 --- a/arch/sparc64/kernel/vmlinux.lds.S +++ b/arch/sparc64/kernel/vmlinux.lds.S @@ -17,6 +17,7 @@ SECTIONS *(.text) SCHED_TEXT LOCK_TEXT + KPROBES_TEXT *(.gnu.warning) } =0 _etext = .; diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S index dfbc7e0dcf70..99c809a1e5ac 100644 --- a/arch/sparc64/kernel/winfixup.S +++ b/arch/sparc64/kernel/winfixup.S @@ -318,7 +318,7 @@ fill_fixup_dax: nop rdpr %pstate, %l1 ! Prepare to change globals. mov %g4, %o1 ! Setup args for - mov %g5, %o2 ! final call to data_access_exception. + mov %g5, %o2 ! final call to spitfire_data_access_exception. andn %l1, PSTATE_MM, %l1 ! We want to be in RMO mov %g6, %o7 ! Stash away current. @@ -330,7 +330,7 @@ fill_fixup_dax: mov TSB_REG, %g1 ldxa [%g1] ASI_IMMU, %g5 #endif - call data_access_exception + call spitfire_data_access_exception add %sp, PTREGS_OFF, %o0 b,pt %xcc, rtrap @@ -391,7 +391,7 @@ window_dax_from_user_common: 109: or %g7, %lo(109b), %g7 mov %l4, %o1 mov %l5, %o2 - call data_access_exception + call spitfire_data_access_exception add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap clr %l6 diff --git a/arch/sparc64/lib/Makefile b/arch/sparc64/lib/Makefile index 40dbeec7e5d6..d968aebe83b2 100644 --- a/arch/sparc64/lib/Makefile +++ b/arch/sparc64/lib/Makefile @@ -14,7 +14,6 @@ lib-y := PeeCeeI.o copy_page.o clear_page.o strlen.o strncmp.o \ copy_in_user.o user_fixup.o memmove.o \ mcount.o ipcsum.o rwsem.o xor.o find_bit.o delay.o -lib-$(CONFIG_DEBUG_SPINLOCK) += debuglocks.o lib-$(CONFIG_HAVE_DEC_LOCK) += dec_and_lock.o obj-y += iomap.o diff --git a/arch/sparc64/lib/PeeCeeI.c b/arch/sparc64/lib/PeeCeeI.c index 3008d536e8c2..3c6cfbb20360 100644 --- a/arch/sparc64/lib/PeeCeeI.c +++ b/arch/sparc64/lib/PeeCeeI.c @@ -7,28 +7,31 @@ #include <asm/io.h> #include <asm/byteorder.h> -void outsb(void __iomem *addr, const void *src, unsigned long count) +void outsb(unsigned long __addr, const void *src, unsigned long count) { + void __iomem *addr = (void __iomem *) __addr; const u8 *p = src; - while(count--) + while (count--) outb(*p++, addr); } -void outsw(void __iomem *addr, const void *src, unsigned long count) +void outsw(unsigned long __addr, const void *src, unsigned long count) { - if(count) { + void __iomem *addr = (void __iomem *) __addr; + + if (count) { u16 *ps = (u16 *)src; u32 *pi; - if(((u64)src) & 0x2) { + if (((u64)src) & 0x2) { u16 val = le16_to_cpup(ps); outw(val, addr); ps++; count--; } pi = (u32 *)ps; - while(count >= 2) { + while (count >= 2) { u32 w = le32_to_cpup(pi); pi++; @@ -37,19 +40,21 @@ void outsw(void __iomem *addr, const void *src, unsigned long count) count -= 2; } ps = (u16 *)pi; - if(count) { + if (count) { u16 val = le16_to_cpup(ps); outw(val, addr); } } } -void outsl(void __iomem *addr, const void *src, unsigned long count) +void outsl(unsigned long __addr, const void *src, unsigned long count) { - if(count) { - if((((u64)src) & 0x3) == 0) { + void __iomem *addr = (void __iomem *) __addr; + + if (count) { + if ((((u64)src) & 0x3) == 0) { u32 *p = (u32 *)src; - while(count--) { + while (count--) { u32 val = cpu_to_le32p(p); outl(val, addr); p++; @@ -60,13 +65,13 @@ void outsl(void __iomem *addr, const void *src, unsigned long count) u32 l = 0, l2; u32 *pi; - switch(((u64)src) & 0x3) { + switch (((u64)src) & 0x3) { case 0x2: count -= 1; l = cpu_to_le16p(ps) << 16; ps++; pi = (u32 *)ps; - while(count--) { + while (count--) { l2 = cpu_to_le32p(pi); pi++; outl(((l >> 16) | (l2 << 16)), addr); @@ -86,7 +91,7 @@ void outsl(void __iomem *addr, const void *src, unsigned long count) ps++; l |= (l2 << 16); pi = (u32 *)ps; - while(count--) { + while (count--) { l2 = cpu_to_le32p(pi); pi++; outl(((l >> 8) | (l2 << 24)), addr); @@ -101,7 +106,7 @@ void outsl(void __iomem *addr, const void *src, unsigned long count) pb = (u8 *)src; l = (*pb++ << 24); pi = (u32 *)pb; - while(count--) { + while (count--) { l2 = cpu_to_le32p(pi); pi++; outl(((l >> 24) | (l2 << 8)), addr); @@ -119,16 +124,18 @@ void outsl(void __iomem *addr, const void *src, unsigned long count) } } -void insb(void __iomem *addr, void *dst, unsigned long count) +void insb(unsigned long __addr, void *dst, unsigned long count) { - if(count) { + void __iomem *addr = (void __iomem *) __addr; + + if (count) { u32 *pi; u8 *pb = dst; - while((((unsigned long)pb) & 0x3) && count--) + while ((((unsigned long)pb) & 0x3) && count--) *pb++ = inb(addr); pi = (u32 *)pb; - while(count >= 4) { + while (count >= 4) { u32 w; w = (inb(addr) << 24); @@ -139,23 +146,25 @@ void insb(void __iomem *addr, void *dst, unsigned long count) count -= 4; } pb = (u8 *)pi; - while(count--) + while (count--) *pb++ = inb(addr); } } -void insw(void __iomem *addr, void *dst, unsigned long count) +void insw(unsigned long __addr, void *dst, unsigned long count) { - if(count) { + void __iomem *addr = (void __iomem *) __addr; + + if (count) { u16 *ps = dst; u32 *pi; - if(((unsigned long)ps) & 0x2) { + if (((unsigned long)ps) & 0x2) { *ps++ = le16_to_cpu(inw(addr)); count--; } pi = (u32 *)ps; - while(count >= 2) { + while (count >= 2) { u32 w; w = (le16_to_cpu(inw(addr)) << 16); @@ -164,31 +173,33 @@ void insw(void __iomem *addr, void *dst, unsigned long count) count -= 2; } ps = (u16 *)pi; - if(count) + if (count) *ps = le16_to_cpu(inw(addr)); } } -void insl(void __iomem *addr, void *dst, unsigned long count) +void insl(unsigned long __addr, void *dst, unsigned long count) { - if(count) { - if((((unsigned long)dst) & 0x3) == 0) { + void __iomem *addr = (void __iomem *) __addr; + + if (count) { + if ((((unsigned long)dst) & 0x3) == 0) { u32 *pi = dst; - while(count--) + while (count--) *pi++ = le32_to_cpu(inl(addr)); } else { u32 l = 0, l2, *pi; u16 *ps; u8 *pb; - switch(((unsigned long)dst) & 3) { + switch (((unsigned long)dst) & 3) { case 0x2: ps = dst; count -= 1; l = le32_to_cpu(inl(addr)); *ps++ = l; pi = (u32 *)ps; - while(count--) { + while (count--) { l2 = le32_to_cpu(inl(addr)); *pi++ = (l << 16) | (l2 >> 16); l = l2; @@ -205,7 +216,7 @@ void insl(void __iomem *addr, void *dst, unsigned long count) ps = (u16 *)pb; *ps++ = ((l >> 8) & 0xffff); pi = (u32 *)ps; - while(count--) { + while (count--) { l2 = le32_to_cpu(inl(addr)); *pi++ = (l << 24) | (l2 >> 8); l = l2; @@ -220,7 +231,7 @@ void insl(void __iomem *addr, void *dst, unsigned long count) l = le32_to_cpu(inl(addr)); *pb++ = l >> 24; pi = (u32 *)pb; - while(count--) { + while (count--) { l2 = le32_to_cpu(inl(addr)); *pi++ = (l << 8) | (l2 >> 24); l = l2; diff --git a/arch/sparc64/lib/copy_page.S b/arch/sparc64/lib/copy_page.S index 23ebf2c970b7..feebb14fd27a 100644 --- a/arch/sparc64/lib/copy_page.S +++ b/arch/sparc64/lib/copy_page.S @@ -87,7 +87,7 @@ copy_user_page: /* %o0=dest, %o1=src, %o2=vaddr */ membar #Sync wrpr %o2, 0x0, %pstate - BRANCH_IF_ANY_CHEETAH(g3,o2,1f) +cheetah_copy_page_insn: ba,pt %xcc, 9f nop @@ -240,3 +240,14 @@ copy_user_page: /* %o0=dest, %o1=src, %o2=vaddr */ stw %o4, [%g6 + TI_PRE_COUNT] .size copy_user_page, .-copy_user_page + + .globl cheetah_patch_copy_page +cheetah_patch_copy_page: + sethi %hi(0x01000000), %o1 ! NOP + sethi %hi(cheetah_copy_page_insn), %o0 + or %o0, %lo(cheetah_copy_page_insn), %o0 + stw %o1, [%o0] + membar #StoreStore + flush %o0 + retl + nop diff --git a/arch/sparc64/lib/debuglocks.c b/arch/sparc64/lib/debuglocks.c deleted file mode 100644 index f03344cf784e..000000000000 --- a/arch/sparc64/lib/debuglocks.c +++ /dev/null @@ -1,378 +0,0 @@ -/* $Id: debuglocks.c,v 1.9 2001/11/17 00:10:48 davem Exp $ - * debuglocks.c: Debugging versions of SMP locking primitives. - * - * Copyright (C) 1998 David S. Miller (davem@redhat.com) - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <asm/system.h> - -#ifdef CONFIG_SMP - -#define GET_CALLER(PC) __asm__ __volatile__("mov %%i7, %0" : "=r" (PC)) - -static inline void show (char *str, spinlock_t *lock, unsigned long caller) -{ - int cpu = smp_processor_id(); - - printk("%s(%p) CPU#%d stuck at %08x, owner PC(%08x):CPU(%x)\n", - str, lock, cpu, (unsigned int) caller, - lock->owner_pc, lock->owner_cpu); -} - -static inline void show_read (char *str, rwlock_t *lock, unsigned long caller) -{ - int cpu = smp_processor_id(); - - printk("%s(%p) CPU#%d stuck at %08x, writer PC(%08x):CPU(%x)\n", - str, lock, cpu, (unsigned int) caller, - lock->writer_pc, lock->writer_cpu); -} - -static inline void show_write (char *str, rwlock_t *lock, unsigned long caller) -{ - int cpu = smp_processor_id(); - int i; - - printk("%s(%p) CPU#%d stuck at %08x\n", - str, lock, cpu, (unsigned int) caller); - printk("Writer: PC(%08x):CPU(%x)\n", - lock->writer_pc, lock->writer_cpu); - printk("Readers:"); - for (i = 0; i < NR_CPUS; i++) - if (lock->reader_pc[i]) - printk(" %d[%08x]", i, lock->reader_pc[i]); - printk("\n"); -} - -#undef INIT_STUCK -#define INIT_STUCK 100000000 - -void _do_spin_lock(spinlock_t *lock, char *str) -{ - unsigned long caller, val; - int stuck = INIT_STUCK; - int cpu = get_cpu(); - int shown = 0; - - GET_CALLER(caller); -again: - __asm__ __volatile__("ldstub [%1], %0" - : "=r" (val) - : "r" (&(lock->lock)) - : "memory"); - membar("#StoreLoad | #StoreStore"); - if (val) { - while (lock->lock) { - if (!--stuck) { - if (shown++ <= 2) - show(str, lock, caller); - stuck = INIT_STUCK; - } - membar("#LoadLoad"); - } - goto again; - } - lock->owner_pc = ((unsigned int)caller); - lock->owner_cpu = cpu; - current->thread.smp_lock_count++; - current->thread.smp_lock_pc = ((unsigned int)caller); - - put_cpu(); -} - -int _do_spin_trylock(spinlock_t *lock) -{ - unsigned long val, caller; - int cpu = get_cpu(); - - GET_CALLER(caller); - __asm__ __volatile__("ldstub [%1], %0" - : "=r" (val) - : "r" (&(lock->lock)) - : "memory"); - membar("#StoreLoad | #StoreStore"); - if (!val) { - lock->owner_pc = ((unsigned int)caller); - lock->owner_cpu = cpu; - current->thread.smp_lock_count++; - current->thread.smp_lock_pc = ((unsigned int)caller); - } - - put_cpu(); - - return val == 0; -} - -void _do_spin_unlock(spinlock_t *lock) -{ - lock->owner_pc = 0; - lock->owner_cpu = NO_PROC_ID; - membar("#StoreStore | #LoadStore"); - lock->lock = 0; - current->thread.smp_lock_count--; -} - -/* Keep INIT_STUCK the same... */ - -void _do_read_lock (rwlock_t *rw, char *str) -{ - unsigned long caller, val; - int stuck = INIT_STUCK; - int cpu = get_cpu(); - int shown = 0; - - GET_CALLER(caller); -wlock_again: - /* Wait for any writer to go away. */ - while (((long)(rw->lock)) < 0) { - if (!--stuck) { - if (shown++ <= 2) - show_read(str, rw, caller); - stuck = INIT_STUCK; - } - membar("#LoadLoad"); - } - /* Try once to increment the counter. */ - __asm__ __volatile__( -" ldx [%0], %%g1\n" -" brlz,a,pn %%g1, 2f\n" -" mov 1, %0\n" -" add %%g1, 1, %%g7\n" -" casx [%0], %%g1, %%g7\n" -" sub %%g1, %%g7, %0\n" -"2:" : "=r" (val) - : "0" (&(rw->lock)) - : "g1", "g7", "memory"); - membar("#StoreLoad | #StoreStore"); - if (val) - goto wlock_again; - rw->reader_pc[cpu] = ((unsigned int)caller); - current->thread.smp_lock_count++; - current->thread.smp_lock_pc = ((unsigned int)caller); - - put_cpu(); -} - -void _do_read_unlock (rwlock_t *rw, char *str) -{ - unsigned long caller, val; - int stuck = INIT_STUCK; - int cpu = get_cpu(); - int shown = 0; - - GET_CALLER(caller); - - /* Drop our identity _first_. */ - rw->reader_pc[cpu] = 0; - current->thread.smp_lock_count--; -runlock_again: - /* Spin trying to decrement the counter using casx. */ - __asm__ __volatile__( -" membar #StoreLoad | #LoadLoad\n" -" ldx [%0], %%g1\n" -" sub %%g1, 1, %%g7\n" -" casx [%0], %%g1, %%g7\n" -" membar #StoreLoad | #StoreStore\n" -" sub %%g1, %%g7, %0\n" - : "=r" (val) - : "0" (&(rw->lock)) - : "g1", "g7", "memory"); - if (val) { - if (!--stuck) { - if (shown++ <= 2) - show_read(str, rw, caller); - stuck = INIT_STUCK; - } - goto runlock_again; - } - - put_cpu(); -} - -void _do_write_lock (rwlock_t *rw, char *str) -{ - unsigned long caller, val; - int stuck = INIT_STUCK; - int cpu = get_cpu(); - int shown = 0; - - GET_CALLER(caller); -wlock_again: - /* Spin while there is another writer. */ - while (((long)rw->lock) < 0) { - if (!--stuck) { - if (shown++ <= 2) - show_write(str, rw, caller); - stuck = INIT_STUCK; - } - membar("#LoadLoad"); - } - - /* Try to acuire the write bit. */ - __asm__ __volatile__( -" mov 1, %%g3\n" -" sllx %%g3, 63, %%g3\n" -" ldx [%0], %%g1\n" -" brlz,pn %%g1, 1f\n" -" or %%g1, %%g3, %%g7\n" -" casx [%0], %%g1, %%g7\n" -" membar #StoreLoad | #StoreStore\n" -" ba,pt %%xcc, 2f\n" -" sub %%g1, %%g7, %0\n" -"1: mov 1, %0\n" -"2:" : "=r" (val) - : "0" (&(rw->lock)) - : "g3", "g1", "g7", "memory"); - if (val) { - /* We couldn't get the write bit. */ - if (!--stuck) { - if (shown++ <= 2) - show_write(str, rw, caller); - stuck = INIT_STUCK; - } - goto wlock_again; - } - if ((rw->lock & ((1UL<<63)-1UL)) != 0UL) { - /* Readers still around, drop the write - * lock, spin, and try again. - */ - if (!--stuck) { - if (shown++ <= 2) - show_write(str, rw, caller); - stuck = INIT_STUCK; - } - __asm__ __volatile__( -" mov 1, %%g3\n" -" sllx %%g3, 63, %%g3\n" -"1: ldx [%0], %%g1\n" -" andn %%g1, %%g3, %%g7\n" -" casx [%0], %%g1, %%g7\n" -" cmp %%g1, %%g7\n" -" membar #StoreLoad | #StoreStore\n" -" bne,pn %%xcc, 1b\n" -" nop" - : /* no outputs */ - : "r" (&(rw->lock)) - : "g3", "g1", "g7", "cc", "memory"); - while(rw->lock != 0) { - if (!--stuck) { - if (shown++ <= 2) - show_write(str, rw, caller); - stuck = INIT_STUCK; - } - membar("#LoadLoad"); - } - goto wlock_again; - } - - /* We have it, say who we are. */ - rw->writer_pc = ((unsigned int)caller); - rw->writer_cpu = cpu; - current->thread.smp_lock_count++; - current->thread.smp_lock_pc = ((unsigned int)caller); - - put_cpu(); -} - -void _do_write_unlock(rwlock_t *rw) -{ - unsigned long caller, val; - int stuck = INIT_STUCK; - int shown = 0; - - GET_CALLER(caller); - - /* Drop our identity _first_ */ - rw->writer_pc = 0; - rw->writer_cpu = NO_PROC_ID; - current->thread.smp_lock_count--; -wlock_again: - __asm__ __volatile__( -" membar #StoreLoad | #LoadLoad\n" -" mov 1, %%g3\n" -" sllx %%g3, 63, %%g3\n" -" ldx [%0], %%g1\n" -" andn %%g1, %%g3, %%g7\n" -" casx [%0], %%g1, %%g7\n" -" membar #StoreLoad | #StoreStore\n" -" sub %%g1, %%g7, %0\n" - : "=r" (val) - : "0" (&(rw->lock)) - : "g3", "g1", "g7", "memory"); - if (val) { - if (!--stuck) { - if (shown++ <= 2) - show_write("write_unlock", rw, caller); - stuck = INIT_STUCK; - } - goto wlock_again; - } -} - -int _do_write_trylock (rwlock_t *rw, char *str) -{ - unsigned long caller, val; - int cpu = get_cpu(); - - GET_CALLER(caller); - - /* Try to acuire the write bit. */ - __asm__ __volatile__( -" mov 1, %%g3\n" -" sllx %%g3, 63, %%g3\n" -" ldx [%0], %%g1\n" -" brlz,pn %%g1, 1f\n" -" or %%g1, %%g3, %%g7\n" -" casx [%0], %%g1, %%g7\n" -" membar #StoreLoad | #StoreStore\n" -" ba,pt %%xcc, 2f\n" -" sub %%g1, %%g7, %0\n" -"1: mov 1, %0\n" -"2:" : "=r" (val) - : "0" (&(rw->lock)) - : "g3", "g1", "g7", "memory"); - - if (val) { - put_cpu(); - return 0; - } - - if ((rw->lock & ((1UL<<63)-1UL)) != 0UL) { - /* Readers still around, drop the write - * lock, return failure. - */ - __asm__ __volatile__( -" mov 1, %%g3\n" -" sllx %%g3, 63, %%g3\n" -"1: ldx [%0], %%g1\n" -" andn %%g1, %%g3, %%g7\n" -" casx [%0], %%g1, %%g7\n" -" cmp %%g1, %%g7\n" -" membar #StoreLoad | #StoreStore\n" -" bne,pn %%xcc, 1b\n" -" nop" - : /* no outputs */ - : "r" (&(rw->lock)) - : "g3", "g1", "g7", "cc", "memory"); - - put_cpu(); - - return 0; - } - - /* We have it, say who we are. */ - rw->writer_pc = ((unsigned int)caller); - rw->writer_cpu = cpu; - current->thread.smp_lock_count++; - current->thread.smp_lock_pc = ((unsigned int)caller); - - put_cpu(); - - return 1; -} - -#endif /* CONFIG_SMP */ diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c index 52e9375288a9..db1e3310e907 100644 --- a/arch/sparc64/mm/fault.c +++ b/arch/sparc64/mm/fault.c @@ -18,6 +18,7 @@ #include <linux/smp_lock.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/kprobes.h> #include <asm/page.h> #include <asm/pgtable.h> @@ -117,8 +118,9 @@ unsigned long __init prom_probe_memory (void) return tally; } -static void unhandled_fault(unsigned long address, struct task_struct *tsk, - struct pt_regs *regs) +static void __kprobes unhandled_fault(unsigned long address, + struct task_struct *tsk, + struct pt_regs *regs) { if ((unsigned long) address < PAGE_SIZE) { printk(KERN_ALERT "Unable to handle kernel NULL " @@ -304,7 +306,7 @@ cannot_handle: unhandled_fault (address, current, regs); } -asmlinkage void do_sparc64_fault(struct pt_regs *regs) +asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs) { struct mm_struct *mm = current->mm; struct vm_area_struct *vma; diff --git a/arch/sparc64/mm/generic.c b/arch/sparc64/mm/generic.c index 6b31f6117a95..c954d91f01d0 100644 --- a/arch/sparc64/mm/generic.c +++ b/arch/sparc64/mm/generic.c @@ -116,37 +116,6 @@ static inline int io_remap_pud_range(struct mm_struct *mm, pud_t * pud, unsigned return 0; } -int io_remap_page_range(struct vm_area_struct *vma, unsigned long from, unsigned long offset, unsigned long size, pgprot_t prot, int space) -{ - int error = 0; - pgd_t * dir; - unsigned long beg = from; - unsigned long end = from + size; - struct mm_struct *mm = vma->vm_mm; - - prot = __pgprot(pg_iobits); - offset -= from; - dir = pgd_offset(mm, from); - flush_cache_range(vma, beg, end); - - spin_lock(&mm->page_table_lock); - while (from < end) { - pud_t *pud = pud_alloc(mm, dir, from); - error = -ENOMEM; - if (!pud) - break; - error = io_remap_pud_range(mm, pud, from, end - from, offset + from, prot, space); - if (error) - break; - from = (from + PGDIR_SIZE) & PGDIR_MASK; - dir++; - } - flush_tlb_range(vma, beg, end); - spin_unlock(&mm->page_table_lock); - - return error; -} - int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot) { diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 3fbaf342a452..fdb1ebb308c9 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -19,6 +19,7 @@ #include <linux/pagemap.h> #include <linux/fs.h> #include <linux/seq_file.h> +#include <linux/kprobes.h> #include <asm/head.h> #include <asm/system.h> @@ -250,7 +251,7 @@ out: put_cpu(); } -void flush_icache_range(unsigned long start, unsigned long end) +void __kprobes flush_icache_range(unsigned long start, unsigned long end) { /* Cheetah has coherent I-cache. */ if (tlb_type == spitfire) { diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index 363770893797..b2ee9b53227f 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -10,6 +10,7 @@ #include <asm/page.h> #include <asm/spitfire.h> #include <asm/mmu_context.h> +#include <asm/mmu.h> #include <asm/pil.h> #include <asm/head.h> #include <asm/thread_info.h> @@ -45,6 +46,8 @@ __flush_tlb_mm: /* %o0=(ctx & TAG_CONTEXT_BITS), %o1=SECONDARY_CONTEXT */ nop nop nop + nop + nop .align 32 .globl __flush_tlb_pending @@ -73,6 +76,9 @@ __flush_tlb_pending: retl wrpr %g7, 0x0, %pstate nop + nop + nop + nop .align 32 .globl __flush_tlb_kernel_range @@ -113,6 +119,7 @@ __spitfire_flush_tlb_mm_slow: #else #error unsupported PAGE_SIZE #endif + .section .kprobes.text, "ax" .align 32 .globl __flush_icache_page __flush_icache_page: /* %o0 = phys_page */ @@ -195,6 +202,7 @@ dflush4:stxa %g0, [%o4] ASI_DCACHE_TAG nop #endif /* DCACHE_ALIASING_POSSIBLE */ + .previous .text .align 32 __prefill_dtlb: rdpr %pstate, %g7 @@ -224,16 +232,8 @@ __update_mmu_cache: /* %o0=hw_context, %o1=address, %o2=pte, %o3=fault_code */ or %o5, %o0, %o5 ba,a,pt %xcc, __prefill_itlb - /* Cheetah specific versions, patched at boot time. - * - * This writes of the PRIMARY_CONTEXT register in this file are - * safe even on Cheetah+ and later wrt. the page size fields. - * The nucleus page size fields do not matter because we make - * no data references, and these instructions execute out of a - * locked I-TLB entry sitting in the fully assosciative I-TLB. - * This sequence should also never trap. - */ -__cheetah_flush_tlb_mm: /* 15 insns */ + /* Cheetah specific versions, patched at boot time. */ +__cheetah_flush_tlb_mm: /* 18 insns */ rdpr %pstate, %g7 andn %g7, PSTATE_IE, %g2 wrpr %g2, 0x0, %pstate @@ -241,6 +241,9 @@ __cheetah_flush_tlb_mm: /* 15 insns */ mov PRIMARY_CONTEXT, %o2 mov 0x40, %g3 ldxa [%o2] ASI_DMMU, %g2 + srlx %g2, CTX_PGSZ1_NUC_SHIFT, %o1 + sllx %o1, CTX_PGSZ1_NUC_SHIFT, %o1 + or %o0, %o1, %o0 /* Preserve nucleus page size fields */ stxa %o0, [%o2] ASI_DMMU stxa %g0, [%g3] ASI_DMMU_DEMAP stxa %g0, [%g3] ASI_IMMU_DEMAP @@ -250,7 +253,7 @@ __cheetah_flush_tlb_mm: /* 15 insns */ retl wrpr %g7, 0x0, %pstate -__cheetah_flush_tlb_pending: /* 23 insns */ +__cheetah_flush_tlb_pending: /* 26 insns */ /* %o0 = context, %o1 = nr, %o2 = vaddrs[] */ rdpr %pstate, %g7 sllx %o1, 3, %o1 @@ -259,6 +262,9 @@ __cheetah_flush_tlb_pending: /* 23 insns */ wrpr %g0, 1, %tl mov PRIMARY_CONTEXT, %o4 ldxa [%o4] ASI_DMMU, %g2 + srlx %g2, CTX_PGSZ1_NUC_SHIFT, %o3 + sllx %o3, CTX_PGSZ1_NUC_SHIFT, %o3 + or %o0, %o3, %o0 /* Preserve nucleus page size fields */ stxa %o0, [%o4] ASI_DMMU 1: sub %o1, (1 << 3), %o1 ldx [%o2 + %o1], %o3 @@ -311,14 +317,14 @@ cheetah_patch_cachetlbops: sethi %hi(__cheetah_flush_tlb_mm), %o1 or %o1, %lo(__cheetah_flush_tlb_mm), %o1 call cheetah_patch_one - mov 15, %o2 + mov 18, %o2 sethi %hi(__flush_tlb_pending), %o0 or %o0, %lo(__flush_tlb_pending), %o0 sethi %hi(__cheetah_flush_tlb_pending), %o1 or %o1, %lo(__cheetah_flush_tlb_pending), %o1 call cheetah_patch_one - mov 23, %o2 + mov 26, %o2 #ifdef DCACHE_ALIASING_POSSIBLE sethi %hi(__flush_dcache_page), %o0 @@ -352,9 +358,12 @@ cheetah_patch_cachetlbops: .globl xcall_flush_tlb_mm xcall_flush_tlb_mm: mov PRIMARY_CONTEXT, %g2 - mov 0x40, %g4 ldxa [%g2] ASI_DMMU, %g3 + srlx %g3, CTX_PGSZ1_NUC_SHIFT, %g4 + sllx %g4, CTX_PGSZ1_NUC_SHIFT, %g4 + or %g5, %g4, %g5 /* Preserve nucleus page size fields */ stxa %g5, [%g2] ASI_DMMU + mov 0x40, %g4 stxa %g0, [%g4] ASI_DMMU_DEMAP stxa %g0, [%g4] ASI_IMMU_DEMAP stxa %g3, [%g2] ASI_DMMU @@ -366,6 +375,10 @@ xcall_flush_tlb_pending: sllx %g1, 3, %g1 mov PRIMARY_CONTEXT, %g4 ldxa [%g4] ASI_DMMU, %g2 + srlx %g2, CTX_PGSZ1_NUC_SHIFT, %g4 + sllx %g4, CTX_PGSZ1_NUC_SHIFT, %g4 + or %g5, %g4, %g5 + mov PRIMARY_CONTEXT, %g4 stxa %g5, [%g4] ASI_DMMU 1: sub %g1, (1 << 3), %g1 ldx [%g7 + %g1], %g5 diff --git a/arch/sparc64/solaris/ioctl.c b/arch/sparc64/solaris/ioctl.c index cac0a1cf0050..be0a054e3ed6 100644 --- a/arch/sparc64/solaris/ioctl.c +++ b/arch/sparc64/solaris/ioctl.c @@ -24,6 +24,7 @@ #include <linux/netdevice.h> #include <linux/mtio.h> #include <linux/time.h> +#include <linux/rcupdate.h> #include <linux/compat.h> #include <net/sock.h> @@ -293,16 +294,18 @@ static struct module_info { static inline int solaris_sockmod(unsigned int fd, unsigned int cmd, u32 arg) { struct inode *ino; + struct fdtable *fdt; /* I wonder which of these tests are superfluous... --patrik */ - spin_lock(¤t->files->file_lock); - if (! current->files->fd[fd] || - ! current->files->fd[fd]->f_dentry || - ! (ino = current->files->fd[fd]->f_dentry->d_inode) || + rcu_read_lock(); + fdt = files_fdtable(current->files); + if (! fdt->fd[fd] || + ! fdt->fd[fd]->f_dentry || + ! (ino = fdt->fd[fd]->f_dentry->d_inode) || ! S_ISSOCK(ino->i_mode)) { - spin_unlock(¤t->files->file_lock); + rcu_read_unlock(); return TBADF; } - spin_unlock(¤t->files->file_lock); + rcu_read_unlock(); switch (cmd & 0xff) { case 109: /* SI_SOCKPARAMS */ diff --git a/arch/sparc64/solaris/misc.c b/arch/sparc64/solaris/misc.c index 15b4cfe07557..302efbcba70e 100644 --- a/arch/sparc64/solaris/misc.c +++ b/arch/sparc64/solaris/misc.c @@ -737,7 +737,8 @@ MODULE_LICENSE("GPL"); extern u32 tl0_solaris[8]; #define update_ttable(x) \ tl0_solaris[3] = (((long)(x) - (long)tl0_solaris - 3) >> 2) | 0x40000000; \ - __asm__ __volatile__ ("membar #StoreStore; flush %0" : : "r" (&tl0_solaris[3])) + wmb(); \ + __asm__ __volatile__ ("flush %0" : : "r" (&tl0_solaris[3])) #else #endif @@ -761,7 +762,8 @@ int init_module(void) entry64_personality_patch |= (offsetof(struct task_struct, personality) + (sizeof(unsigned long) - 1)); - __asm__ __volatile__("membar #StoreStore; flush %0" + wmb(); + __asm__ __volatile__("flush %0" : : "r" (&entry64_personality_patch)); return 0; } diff --git a/arch/sparc64/solaris/timod.c b/arch/sparc64/solaris/timod.c index 022c80f43392..aaad29c35c83 100644 --- a/arch/sparc64/solaris/timod.c +++ b/arch/sparc64/solaris/timod.c @@ -143,9 +143,11 @@ static struct T_primsg *timod_mkctl(int size) static void timod_wake_socket(unsigned int fd) { struct socket *sock; + struct fdtable *fdt; SOLD("wakeing socket"); - sock = SOCKET_I(current->files->fd[fd]->f_dentry->d_inode); + fdt = files_fdtable(current->files); + sock = SOCKET_I(fdt->fd[fd]->f_dentry->d_inode); wake_up_interruptible(&sock->wait); read_lock(&sock->sk->sk_callback_lock); if (sock->fasync_list && !test_bit(SOCK_ASYNC_WAITDATA, &sock->flags)) @@ -157,9 +159,11 @@ static void timod_wake_socket(unsigned int fd) static void timod_queue(unsigned int fd, struct T_primsg *it) { struct sol_socket_struct *sock; + struct fdtable *fdt; SOLD("queuing primsg"); - sock = (struct sol_socket_struct *)current->files->fd[fd]->private_data; + fdt = files_fdtable(current->files); + sock = (struct sol_socket_struct *)fdt->fd[fd]->private_data; it->next = sock->pfirst; sock->pfirst = it; if (!sock->plast) @@ -171,9 +175,11 @@ static void timod_queue(unsigned int fd, struct T_primsg *it) static void timod_queue_end(unsigned int fd, struct T_primsg *it) { struct sol_socket_struct *sock; + struct fdtable *fdt; SOLD("queuing primsg at end"); - sock = (struct sol_socket_struct *)current->files->fd[fd]->private_data; + fdt = files_fdtable(current->files); + sock = (struct sol_socket_struct *)fdt->fd[fd]->private_data; it->next = NULL; if (sock->plast) sock->plast->next = it; @@ -344,6 +350,7 @@ int timod_putmsg(unsigned int fd, char __user *ctl_buf, int ctl_len, char *buf; struct file *filp; struct inode *ino; + struct fdtable *fdt; struct sol_socket_struct *sock; mm_segment_t old_fs = get_fs(); long args[6]; @@ -351,7 +358,9 @@ int timod_putmsg(unsigned int fd, char __user *ctl_buf, int ctl_len, (int (*)(int, unsigned long __user *))SYS(socketcall); int (*sys_sendto)(int, void __user *, size_t, unsigned, struct sockaddr __user *, int) = (int (*)(int, void __user *, size_t, unsigned, struct sockaddr __user *, int))SYS(sendto); - filp = current->files->fd[fd]; + + fdt = files_fdtable(current->files); + filp = fdt->fd[fd]; ino = filp->f_dentry->d_inode; sock = (struct sol_socket_struct *)filp->private_data; SOLD("entry"); @@ -620,6 +629,7 @@ int timod_getmsg(unsigned int fd, char __user *ctl_buf, int ctl_maxlen, s32 __us int oldflags; struct file *filp; struct inode *ino; + struct fdtable *fdt; struct sol_socket_struct *sock; struct T_unitdata_ind udi; mm_segment_t old_fs = get_fs(); @@ -632,7 +642,8 @@ int timod_getmsg(unsigned int fd, char __user *ctl_buf, int ctl_maxlen, s32 __us SOLD("entry"); SOLDD(("%u %p %d %p %p %d %p %d\n", fd, ctl_buf, ctl_maxlen, ctl_len, data_buf, data_maxlen, data_len, *flags_p)); - filp = current->files->fd[fd]; + fdt = files_fdtable(current->files); + filp = fdt->fd[fd]; ino = filp->f_dentry->d_inode; sock = (struct sol_socket_struct *)filp->private_data; SOLDD(("%p %p\n", sock->pfirst, sock->pfirst ? sock->pfirst->next : NULL)); @@ -844,12 +855,14 @@ asmlinkage int solaris_getmsg(unsigned int fd, u32 arg1, u32 arg2, u32 arg3) int __user *flgptr; int flags; int error = -EBADF; + struct fdtable *fdt; SOLD("entry"); lock_kernel(); if(fd >= NR_OPEN) goto out; - filp = current->files->fd[fd]; + fdt = files_fdtable(current->files); + filp = fdt->fd[fd]; if(!filp) goto out; ino = filp->f_dentry->d_inode; @@ -910,12 +923,14 @@ asmlinkage int solaris_putmsg(unsigned int fd, u32 arg1, u32 arg2, u32 arg3) struct strbuf ctl, dat; int flags = (int) arg3; int error = -EBADF; + struct fdtable *fdt; SOLD("entry"); lock_kernel(); if(fd >= NR_OPEN) goto out; - filp = current->files->fd[fd]; + fdt = files_fdtable(current->files); + filp = fdt->fd[fd]; if(!filp) goto out; ino = filp->f_dentry->d_inode; diff --git a/arch/um/Kconfig b/arch/um/Kconfig index f945444df49c..684e1f8b2755 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -73,7 +73,7 @@ config MODE_SKAS to CONFIG_MODE_TT). Otherwise, it is safe to say Y. Disabling this option will shrink the UML binary slightly. -source "arch/um/Kconfig_arch" +source "arch/um/Kconfig.arch" source "mm/Kconfig" config LD_SCRIPT_STATIC @@ -196,7 +196,7 @@ config HOST_2G_2G config SMP bool "Symmetric multi-processing support (EXPERIMENTAL)" default n - depends on MODE_TT && EXPERIMENTAL + depends on (MODE_TT && EXPERIMENTAL && !SMP_BROKEN) || (BROKEN && SMP_BROKEN) help This option enables UML SMP support. It is NOT related to having a real SMP box. Not directly, at least. @@ -279,7 +279,7 @@ source "net/Kconfig" source "drivers/base/Kconfig" -source "arch/um/Kconfig_char" +source "arch/um/Kconfig.char" source "drivers/block/Kconfig" @@ -287,7 +287,7 @@ config NETDEVICES bool default NET -source "arch/um/Kconfig_net" +source "arch/um/Kconfig.net" source "drivers/net/Kconfig" @@ -311,7 +311,7 @@ config GENERIC_ISA_DMA depends on SCSI default y -source "arch/um/Kconfig_scsi" +source "arch/um/Kconfig.scsi" endmenu diff --git a/arch/um/Kconfig_char b/arch/um/Kconfig.char index 62d87b71179b..62d87b71179b 100644 --- a/arch/um/Kconfig_char +++ b/arch/um/Kconfig.char diff --git a/arch/um/Kconfig.debug b/arch/um/Kconfig.debug index bd41e4286d0d..5681a8bd370b 100644 --- a/arch/um/Kconfig.debug +++ b/arch/um/Kconfig.debug @@ -2,6 +2,17 @@ menu "Kernel hacking" source "lib/Kconfig.debug" +config CMDLINE_ON_HOST + bool "Show command line arguments on the host in TT mode" + depends on MODE_TT + default !DEBUG_INFO + help + This controls whether arguments in guest processes should be shown on + the host's ps output. + Enabling this option hinders debugging on some recent GDB versions + (because GDB gets "confused" when we do an execvp()). So probably you + should disable it. + config PT_PROXY bool "Enable ptrace proxy" depends on XTERM_CHAN && DEBUG_INFO && MODE_TT diff --git a/arch/um/Kconfig_i386 b/arch/um/Kconfig.i386 index 27c18a8d9d17..8ad156a00499 100644 --- a/arch/um/Kconfig_i386 +++ b/arch/um/Kconfig.i386 @@ -6,6 +6,10 @@ config 64BIT bool default n +config SEMAPHORE_SLEEPERS + bool + default y + config TOP_ADDR hex default 0xc0000000 if !HOST_2G_2G diff --git a/arch/um/Kconfig_net b/arch/um/Kconfig.net index fa2ab2dd78b7..14a04ebdeae9 100644 --- a/arch/um/Kconfig_net +++ b/arch/um/Kconfig.net @@ -34,7 +34,7 @@ config UML_NET_ETHERTAP link with the host. To use this, your host kernel must have support for Ethertap - devices. Also, if your host kernel is 2.4.x, it must have + devices. Also, if your host kernel is 2.4.x, it must have CONFIG_NETLINK_DEV configured as Y or M. For more information, see @@ -43,7 +43,7 @@ config UML_NET_ETHERTAP networking. If you'd like to set up an IP network with the host and/or the - outside world, say Y to this, the Daemon Transport and/or the + outside world, say Y to this, the Daemon Transport and/or the Slip Transport. You'll need at least one of them, but may choose more than one without conflict. If you don't need UML networking, say N. @@ -78,7 +78,7 @@ config UML_NET_SLIP The Ethertap Transport is preferred over slip because of its limitations. If you prefer slip, however, say Y here. Otherwise - choose the Multicast transport (to network multiple UMLs on + choose the Multicast transport (to network multiple UMLs on multiple hosts), Ethertap (to network with the host and the outside world), and/or the Daemon transport (to network multiple UMLs on a single host). You may choose more than one without @@ -138,7 +138,7 @@ config UML_NET_PCAP depends on UML_NET && EXPERIMENTAL help The pcap transport makes a pcap packet stream on the host look - like an ethernet device inside UML. This is useful for making + like an ethernet device inside UML. This is useful for making UML act as a network monitor for the host. You must have libcap installed in order to build the pcap transport into UML. @@ -169,11 +169,11 @@ config UML_NET_SLIRP setup string. The effect of this transport on the UML is similar that of a host behind a firewall that masquerades all network connections passing through it (but is less secure). - + To use this you should first have slirp compiled somewhere accessible on the host, and have read its documentation. If you don't need UML networking, say N. - + Startup example: "eth0=slirp,FE:FD:01:02:03:04,/usr/local/bin/slirp" endmenu diff --git a/arch/um/Kconfig_scsi b/arch/um/Kconfig.scsi index c291c942b1a8..c291c942b1a8 100644 --- a/arch/um/Kconfig_scsi +++ b/arch/um/Kconfig.scsi diff --git a/arch/um/Kconfig_x86_64 b/arch/um/Kconfig.x86_64 index 735a047c890c..bd35e59419c8 100644 --- a/arch/um/Kconfig_x86_64 +++ b/arch/um/Kconfig.x86_64 @@ -6,6 +6,10 @@ config 64BIT bool default y +config SEMAPHORE_SLEEPERS + bool + default y + config TOP_ADDR hex default 0x80000000 @@ -33,3 +37,7 @@ config ARCH_HAS_SC_SIGNALS config ARCH_REUSE_HOST_VSYSCALL_AREA bool default n + +config SMP_BROKEN + bool + default y diff --git a/arch/um/Makefile b/arch/um/Makefile index f5a83a72aa75..ce987266dac6 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -56,6 +56,7 @@ SYS_DIR := $(ARCH_DIR)/include/sysdep-$(SUBARCH) CFLAGS += $(CFLAGS-y) -D__arch_um__ -DSUBARCH=\"$(SUBARCH)\" \ $(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap +AFLAGS += $(ARCH_INCLUDE) USER_CFLAGS := $(patsubst -I%,,$(CFLAGS)) USER_CFLAGS := $(patsubst -D__KERNEL__,,$(USER_CFLAGS)) $(ARCH_INCLUDE) \ @@ -101,13 +102,12 @@ define archhelp endef ifneq ($(KBUILD_SRC),) -$(shell mkdir -p $(ARCH_DIR) && ln -fsn $(srctree)/$(ARCH_DIR)/Kconfig_$(SUBARCH) $(ARCH_DIR)/Kconfig_arch) -CLEAN_FILES += $(ARCH_DIR)/Kconfig_arch +$(shell mkdir -p $(ARCH_DIR) && ln -fsn $(srctree)/$(ARCH_DIR)/Kconfig.$(SUBARCH) $(ARCH_DIR)/Kconfig.arch) else -$(shell cd $(ARCH_DIR) && ln -sf Kconfig_$(SUBARCH) Kconfig_arch) +$(shell cd $(ARCH_DIR) && ln -sf Kconfig.$(SUBARCH) Kconfig.arch) endif -prepare: $(ARCH_SYMLINKS) $(SYS_HEADERS) $(GEN_HEADERS) +archprepare: $(ARCH_SYMLINKS) $(SYS_HEADERS) $(GEN_HEADERS) LINK-$(CONFIG_LD_SCRIPT_STATIC) += -static LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib @@ -143,14 +143,14 @@ endef #TT or skas makefiles and don't clean skas_ptregs.h. CLEAN_FILES += linux x.i gmon.out $(ARCH_DIR)/include/uml-config.h \ $(GEN_HEADERS) $(ARCH_DIR)/include/skas_ptregs.h \ - $(ARCH_DIR)/include/user_constants.h + $(ARCH_DIR)/include/user_constants.h $(ARCH_DIR)/Kconfig.arch MRPROPER_FILES += $(SYMLINK_HEADERS) $(ARCH_SYMLINKS) \ - $(addprefix $(ARCH_DIR)/kernel/,$(KERN_SYMLINKS)) $(ARCH_DIR)/os \ - $(ARCH_DIR)/Kconfig_arch + $(addprefix $(ARCH_DIR)/kernel/,$(KERN_SYMLINKS)) $(ARCH_DIR)/os archclean: $(Q)$(MAKE) $(clean)=$(ARCH_DIR)/util + $(Q)$(MAKE) $(clean)=$(ARCH_DIR)/os-$(OS)/util @find . \( -name '*.bb' -o -name '*.bbg' -o -name '*.da' \ -o -name '*.gcov' \) -type f -print | xargs rm -f @@ -196,6 +196,22 @@ define filechk_umlconfig sed 's/ CONFIG/ UML_CONFIG/' endef +define filechk_gen-asm-offsets + (set -e; \ + echo "#ifndef __ASM_OFFSETS_H__"; \ + echo "#define __ASM_OFFSETS_H__"; \ + echo "/*"; \ + echo " * DO NOT MODIFY."; \ + echo " *"; \ + echo " * This file was generated by arch/$(ARCH)/Makefile"; \ + echo " *"; \ + echo " */"; \ + echo ""; \ + sed -ne "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}"; \ + echo ""; \ + echo "#endif" ) +endef + $(ARCH_DIR)/include/uml-config.h : include/linux/autoconf.h $(call filechk,umlconfig) diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386 index a777e57dbf89..1ab431a53ac3 100644 --- a/arch/um/Makefile-i386 +++ b/arch/um/Makefile-i386 @@ -27,7 +27,7 @@ export LDFLAGS HOSTCFLAGS HOSTLDFLAGS UML_OBJCOPYFLAGS endif endif -CFLAGS += -U__$(SUBARCH)__ -U$(SUBARCH) $(STUB_CFLAGS) +CFLAGS += -U__$(SUBARCH)__ -U$(SUBARCH) ifneq ($(CONFIG_GPROF),y) ARCH_CFLAGS += -DUM_FASTCALL diff --git a/arch/um/Makefile-x86_64 b/arch/um/Makefile-x86_64 index aa2f7174ebca..436abbba409b 100644 --- a/arch/um/Makefile-x86_64 +++ b/arch/um/Makefile-x86_64 @@ -6,8 +6,9 @@ START := 0x60000000 #We #undef __x86_64__ for kernelspace, not for userspace where #it's needed for headers to work! -CFLAGS += -U__$(SUBARCH)__ -fno-builtin $(STUB_CFLAGS) +CFLAGS += -U__$(SUBARCH)__ -fno-builtin USER_CFLAGS += -fno-builtin +CHECKFLAGS += -m64 ELF_ARCH := i386:x86-64 ELF_FORMAT := elf64-x86-64 diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile index de17d4c6e02d..783e18cae090 100644 --- a/arch/um/drivers/Makefile +++ b/arch/um/drivers/Makefile @@ -13,7 +13,7 @@ mcast-objs := mcast_kern.o mcast_user.o net-objs := net_kern.o net_user.o mconsole-objs := mconsole_kern.o mconsole_user.o hostaudio-objs := hostaudio_kern.o -ubd-objs := ubd_kern.o ubd_user.o +ubd-objs := ubd_kern.o port-objs := port_kern.o port_user.o harddog-objs := harddog_kern.o harddog_user.o diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c index 5d3768156c92..de3bce71aeb3 100644 --- a/arch/um/drivers/chan_user.c +++ b/arch/um/drivers/chan_user.c @@ -63,7 +63,7 @@ error: * * SIGWINCH can't be received synchronously, so you have to set up to receive it * as a signal. That being the case, if you are going to wait for it, it is - * convenient to sit in a pause() and wait for the signal to bounce you out of + * convenient to sit in sigsuspend() and wait for the signal to bounce you out of * it (see below for how we make sure to exit only on SIGWINCH). */ @@ -94,18 +94,19 @@ static int winch_thread(void *arg) "byte, err = %d\n", -count); /* We are not using SIG_IGN on purpose, so don't fix it as I thought to - * do! If using SIG_IGN, the pause() call below would not stop on + * do! If using SIG_IGN, the sigsuspend() call below would not stop on * SIGWINCH. */ signal(SIGWINCH, winch_handler); sigfillset(&sigs); - sigdelset(&sigs, SIGWINCH); - /* Block anything else than SIGWINCH. */ + /* Block all signals possible. */ if(sigprocmask(SIG_SETMASK, &sigs, NULL) < 0){ printk("winch_thread : sigprocmask failed, errno = %d\n", errno); exit(1); } + /* In sigsuspend(), block anything else than SIGWINCH. */ + sigdelset(&sigs, SIGWINCH); if(setsid() < 0){ printk("winch_thread : setsid failed, errno = %d\n", errno); @@ -130,7 +131,7 @@ static int winch_thread(void *arg) while(1){ /* This will be interrupted by SIGWINCH only, since other signals * are blocked.*/ - pause(); + sigsuspend(&sigs); count = os_write_file(pipe_fd, &c, sizeof(c)); if(count != sizeof(c)) diff --git a/arch/um/drivers/mmapper_kern.c b/arch/um/drivers/mmapper_kern.c index a37a5ac13c22..022f67bb6873 100644 --- a/arch/um/drivers/mmapper_kern.c +++ b/arch/um/drivers/mmapper_kern.c @@ -9,19 +9,11 @@ * */ -#include <linux/types.h> -#include <linux/kdev_t.h> -#include <linux/time.h> -#include <linux/devfs_fs_kernel.h> +#include <linux/init.h> #include <linux/module.h> #include <linux/mm.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/smp_lock.h> #include <linux/miscdevice.h> #include <asm/uaccess.h> -#include <asm/irq.h> -#include <asm/pgtable.h> #include "mem_user.h" #include "user_util.h" @@ -31,35 +23,22 @@ static unsigned long p_buf = 0; static char *v_buf = NULL; static ssize_t -mmapper_read(struct file *file, char *buf, size_t count, loff_t *ppos) +mmapper_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { - if(*ppos > mmapper_size) - return -EINVAL; - - if(count + *ppos > mmapper_size) - count = count + *ppos - mmapper_size; - - if(count < 0) - return -EINVAL; - - copy_to_user(buf,&v_buf[*ppos],count); - - return count; + return simple_read_from_buffer(buf, count, ppos, v_buf, mmapper_size); } static ssize_t -mmapper_write(struct file *file, const char *buf, size_t count, loff_t *ppos) +mmapper_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { - if(*ppos > mmapper_size) + if (*ppos > mmapper_size) return -EINVAL; - if(count + *ppos > mmapper_size) - count = count + *ppos - mmapper_size; - - if(count < 0) - return -EINVAL; + if (count > mmapper_size - *ppos) + count = mmapper_size - *ppos; - copy_from_user(&v_buf[*ppos],buf,count); + if (copy_from_user(&v_buf[*ppos], buf, count)) + return -EFAULT; return count; } @@ -77,7 +56,6 @@ mmapper_mmap(struct file *file, struct vm_area_struct * vma) int ret = -EINVAL; int size; - lock_kernel(); if (vma->vm_pgoff != 0) goto out; @@ -92,7 +70,6 @@ mmapper_mmap(struct file *file, struct vm_area_struct * vma) goto out; ret = 0; out: - unlock_kernel(); return ret; } diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 344b24d09a7c..e77a38da4350 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -35,6 +35,7 @@ #include "linux/blkpg.h" #include "linux/genhd.h" #include "linux/spinlock.h" +#include "asm/atomic.h" #include "asm/segment.h" #include "asm/uaccess.h" #include "asm/irq.h" @@ -53,20 +54,21 @@ #include "mem.h" #include "mem_kern.h" #include "cow.h" +#include "aio.h" enum ubd_req { UBD_READ, UBD_WRITE }; struct io_thread_req { - enum ubd_req op; + enum aio_type op; int fds[2]; unsigned long offsets[2]; unsigned long long offset; unsigned long length; char *buffer; int sectorsize; - unsigned long sector_mask; - unsigned long long cow_offset; - unsigned long bitmap_words[2]; + int bitmap_offset; + long bitmap_start; + long bitmap_end; int error; }; @@ -80,28 +82,31 @@ extern int create_cow_file(char *cow_file, char *backing_file, unsigned long *bitmap_len_out, int *data_offset_out); extern int read_cow_bitmap(int fd, void *buf, int offset, int len); -extern void do_io(struct io_thread_req *req); +extern void do_io(struct io_thread_req *req, struct request *r, + unsigned long *bitmap); -static inline int ubd_test_bit(__u64 bit, unsigned char *data) +static inline int ubd_test_bit(__u64 bit, void *data) { + unsigned char *buffer = data; __u64 n; int bits, off; - bits = sizeof(data[0]) * 8; + bits = sizeof(buffer[0]) * 8; n = bit / bits; off = bit % bits; - return((data[n] & (1 << off)) != 0); + return((buffer[n] & (1 << off)) != 0); } -static inline void ubd_set_bit(__u64 bit, unsigned char *data) +static inline void ubd_set_bit(__u64 bit, void *data) { + unsigned char *buffer = data; __u64 n; int bits, off; - bits = sizeof(data[0]) * 8; + bits = sizeof(buffer[0]) * 8; n = bit / bits; off = bit % bits; - data[n] |= (1 << off); + buffer[n] |= (1 << off); } /*End stuff from ubd_user.h*/ @@ -110,8 +115,6 @@ static inline void ubd_set_bit(__u64 bit, unsigned char *data) static DEFINE_SPINLOCK(ubd_io_lock); static DEFINE_SPINLOCK(ubd_lock); -static void (*do_ubd)(void); - static int ubd_open(struct inode * inode, struct file * filp); static int ubd_release(struct inode * inode, struct file * file); static int ubd_ioctl(struct inode * inode, struct file * file, @@ -158,6 +161,8 @@ struct cow { int data_offset; }; +#define MAX_SG 64 + struct ubd { char *file; int count; @@ -168,6 +173,7 @@ struct ubd { int no_cow; struct cow cow; struct platform_device pdev; + struct scatterlist sg[MAX_SG]; }; #define DEFAULT_COW { \ @@ -460,80 +466,113 @@ __uml_help(fakehd, ); static void do_ubd_request(request_queue_t * q); - -/* Only changed by ubd_init, which is an initcall. */ -int thread_fd = -1; +static int in_ubd; /* Changed by ubd_handler, which is serialized because interrupts only * happen on CPU 0. */ int intr_count = 0; -/* call ubd_finish if you need to serialize */ -static void __ubd_finish(struct request *req, int error) +static void ubd_end_request(struct request *req, int bytes, int uptodate) { - int nsect; - - if(error){ - end_request(req, 0); - return; + if (!end_that_request_first(req, uptodate, bytes >> 9)) { + add_disk_randomness(req->rq_disk); + end_that_request_last(req); } - nsect = req->current_nr_sectors; - req->sector += nsect; - req->buffer += nsect << 9; - req->errors = 0; - req->nr_sectors -= nsect; - req->current_nr_sectors = 0; - end_request(req, 1); } -static inline void ubd_finish(struct request *req, int error) +/* call ubd_finish if you need to serialize */ +static void __ubd_finish(struct request *req, int bytes) { - spin_lock(&ubd_io_lock); - __ubd_finish(req, error); - spin_unlock(&ubd_io_lock); + if(bytes < 0){ + ubd_end_request(req, 0, 0); + return; + } + + ubd_end_request(req, bytes, 1); } -/* Called without ubd_io_lock held */ -static void ubd_handler(void) +static inline void ubd_finish(struct request *req, int bytes) { - struct io_thread_req req; - struct request *rq = elv_next_request(ubd_queue); - int n; - - do_ubd = NULL; - intr_count++; - n = os_read_file(thread_fd, &req, sizeof(req)); - if(n != sizeof(req)){ - printk(KERN_ERR "Pid %d - spurious interrupt in ubd_handler, " - "err = %d\n", os_getpid(), -n); - spin_lock(&ubd_io_lock); - end_request(rq, 0); - spin_unlock(&ubd_io_lock); - return; - } - - ubd_finish(rq, req.error); - reactivate_fd(thread_fd, UBD_IRQ); - do_ubd_request(ubd_queue); + spin_lock(&ubd_io_lock); + __ubd_finish(req, bytes); + spin_unlock(&ubd_io_lock); } +struct bitmap_io { + atomic_t count; + struct aio_context aio; +}; + +struct ubd_aio { + struct aio_context aio; + struct request *req; + int len; + struct bitmap_io *bitmap; + void *bitmap_buf; +}; + +static int ubd_reply_fd = -1; + static irqreturn_t ubd_intr(int irq, void *dev, struct pt_regs *unused) { - ubd_handler(); - return(IRQ_HANDLED); -} + struct aio_thread_reply reply; + struct ubd_aio *aio; + struct request *req; + int err, n, fd = (int) (long) dev; + + while(1){ + err = os_read_file(fd, &reply, sizeof(reply)); + if(err == -EAGAIN) + break; + if(err < 0){ + printk("ubd_aio_handler - read returned err %d\n", + -err); + break; + } -/* Only changed by ubd_init, which is an initcall. */ -static int io_pid = -1; + aio = container_of(reply.data, struct ubd_aio, aio); + n = reply.err; -void kill_io_thread(void) -{ - if(io_pid != -1) - os_kill_process(io_pid, 1); -} + if(n == 0){ + req = aio->req; + req->nr_sectors -= aio->len >> 9; + + if((aio->bitmap != NULL) && + (atomic_dec_and_test(&aio->bitmap->count))){ + aio->aio = aio->bitmap->aio; + aio->len = 0; + kfree(aio->bitmap); + aio->bitmap = NULL; + submit_aio(&aio->aio); + } + else { + if((req->nr_sectors == 0) && + (aio->bitmap == NULL)){ + int len = req->hard_nr_sectors << 9; + ubd_finish(req, len); + } + + if(aio->bitmap_buf != NULL) + kfree(aio->bitmap_buf); + kfree(aio); + } + } + else if(n < 0){ + ubd_finish(aio->req, n); + if(aio->bitmap != NULL) + kfree(aio->bitmap); + if(aio->bitmap_buf != NULL) + kfree(aio->bitmap_buf); + kfree(aio); + } + } + reactivate_fd(fd, UBD_IRQ); -__uml_exitcall(kill_io_thread); + do_ubd_request(ubd_queue); + + return(IRQ_HANDLED); +} static int ubd_file_size(struct ubd *dev, __u64 *size_out) { @@ -569,7 +608,7 @@ static int ubd_open_dev(struct ubd *dev) &dev->cow.data_offset, create_ptr); if((dev->fd == -ENOENT) && create_cow){ - dev->fd = create_cow_file(dev->file, dev->cow.file, + dev->fd = create_cow_file(dev->file, dev->cow.file, dev->openflags, 1 << 9, PAGE_SIZE, &dev->cow.bitmap_offset, &dev->cow.bitmap_len, @@ -668,21 +707,22 @@ static int ubd_add(int n) struct ubd *dev = &ubd_dev[n]; int err; + err = -ENODEV; if(dev->file == NULL) - return(-ENODEV); + goto out; if (ubd_open_dev(dev)) - return(-ENODEV); + goto out; err = ubd_file_size(dev, &dev->size); if(err < 0) - return(err); + goto out_close; dev->size = ROUND_BLOCK(dev->size); err = ubd_new_disk(MAJOR_NR, dev->size, n, &ubd_gendisk[n]); if(err) - return(err); + goto out_close; if(fake_major != MAJOR_NR) ubd_new_disk(fake_major, dev->size, n, @@ -693,8 +733,11 @@ static int ubd_add(int n) if (fake_ide) make_ide_entries(ubd_gendisk[n]->disk_name); + err = 0; +out_close: ubd_close(dev); - return 0; +out: + return err; } static int ubd_config(char *str) @@ -827,6 +870,10 @@ int ubd_init(void) { int i; + ubd_reply_fd = init_aio_irq(UBD_IRQ, "ubd", ubd_intr); + if(ubd_reply_fd < 0) + printk("Setting up ubd AIO failed, err = %d\n", ubd_reply_fd); + devfs_mk_dir("ubd"); if (register_blkdev(MAJOR_NR, "ubd")) return -1; @@ -837,6 +884,7 @@ int ubd_init(void) return -1; } + blk_queue_max_hw_segments(ubd_queue, MAX_SG); if (fake_major != MAJOR_NR) { char name[sizeof("ubd_nnn\0")]; @@ -848,40 +896,12 @@ int ubd_init(void) driver_register(&ubd_driver); for (i = 0; i < MAX_DEV; i++) ubd_add(i); + return 0; } late_initcall(ubd_init); -int ubd_driver_init(void){ - unsigned long stack; - int err; - - /* Set by CONFIG_BLK_DEV_UBD_SYNC or ubd=sync.*/ - if(global_openflags.s){ - printk(KERN_INFO "ubd: Synchronous mode\n"); - /* Letting ubd=sync be like using ubd#s= instead of ubd#= is - * enough. So use anyway the io thread. */ - } - stack = alloc_stack(0, 0); - io_pid = start_io_thread(stack + PAGE_SIZE - sizeof(void *), - &thread_fd); - if(io_pid < 0){ - printk(KERN_ERR - "ubd : Failed to start I/O thread (errno = %d) - " - "falling back to synchronous I/O\n", -io_pid); - io_pid = -1; - return(0); - } - err = um_request_irq(UBD_IRQ, thread_fd, IRQ_READ, ubd_intr, - SA_INTERRUPT, "ubd", ubd_dev); - if(err != 0) - printk(KERN_ERR "um_request_irq failed - errno = %d\n", -err); - return(err); -} - -device_initcall(ubd_driver_init); - static int ubd_open(struct inode *inode, struct file *filp) { struct gendisk *disk = inode->i_bdev->bd_disk; @@ -919,105 +939,55 @@ static int ubd_release(struct inode * inode, struct file * file) return(0); } -static void cowify_bitmap(__u64 io_offset, int length, unsigned long *cow_mask, - __u64 *cow_offset, unsigned long *bitmap, - __u64 bitmap_offset, unsigned long *bitmap_words, - __u64 bitmap_len) +static void cowify_bitmap(struct io_thread_req *req, unsigned long *bitmap) { - __u64 sector = io_offset >> 9; - int i, update_bitmap = 0; - - for(i = 0; i < length >> 9; i++){ - if(cow_mask != NULL) - ubd_set_bit(i, (unsigned char *) cow_mask); - if(ubd_test_bit(sector + i, (unsigned char *) bitmap)) - continue; - - update_bitmap = 1; - ubd_set_bit(sector + i, (unsigned char *) bitmap); - } - - if(!update_bitmap) - return; - - *cow_offset = sector / (sizeof(unsigned long) * 8); - - /* This takes care of the case where we're exactly at the end of the - * device, and *cow_offset + 1 is off the end. So, just back it up - * by one word. Thanks to Lynn Kerby for the fix and James McMechan - * for the original diagnosis. - */ - if(*cow_offset == ((bitmap_len + sizeof(unsigned long) - 1) / - sizeof(unsigned long) - 1)) - (*cow_offset)--; - - bitmap_words[0] = bitmap[*cow_offset]; - bitmap_words[1] = bitmap[*cow_offset + 1]; - - *cow_offset *= sizeof(unsigned long); - *cow_offset += bitmap_offset; -} + __u64 sector = req->offset / req->sectorsize; + int i; -static void cowify_req(struct io_thread_req *req, unsigned long *bitmap, - __u64 bitmap_offset, __u64 bitmap_len) -{ - __u64 sector = req->offset >> 9; - int i; + for(i = 0; i < req->length / req->sectorsize; i++){ + if(ubd_test_bit(sector + i, bitmap)) + continue; - if(req->length > (sizeof(req->sector_mask) * 8) << 9) - panic("Operation too long"); + if(req->bitmap_start == -1) + req->bitmap_start = sector + i; + req->bitmap_end = sector + i + 1; - if(req->op == UBD_READ) { - for(i = 0; i < req->length >> 9; i++){ - if(ubd_test_bit(sector + i, (unsigned char *) bitmap)) - ubd_set_bit(i, (unsigned char *) - &req->sector_mask); - } - } - else cowify_bitmap(req->offset, req->length, &req->sector_mask, - &req->cow_offset, bitmap, bitmap_offset, - req->bitmap_words, bitmap_len); + ubd_set_bit(sector + i, bitmap); + } } /* Called with ubd_io_lock held */ -static int prepare_request(struct request *req, struct io_thread_req *io_req) +static int prepare_request(struct request *req, struct io_thread_req *io_req, + unsigned long long offset, int page_offset, + int len, struct page *page) { struct gendisk *disk = req->rq_disk; struct ubd *dev = disk->private_data; - __u64 offset; - int len; - - if(req->rq_status == RQ_INACTIVE) return(1); /* This should be impossible now */ if((rq_data_dir(req) == WRITE) && !dev->openflags.w){ printk("Write attempted on readonly ubd device %s\n", disk->disk_name); - end_request(req, 0); + ubd_end_request(req, 0, 0); return(1); } - offset = ((__u64) req->sector) << 9; - len = req->current_nr_sectors << 9; - io_req->fds[0] = (dev->cow.file != NULL) ? dev->cow.fd : dev->fd; io_req->fds[1] = dev->fd; - io_req->cow_offset = -1; io_req->offset = offset; io_req->length = len; io_req->error = 0; - io_req->sector_mask = 0; - - io_req->op = (rq_data_dir(req) == READ) ? UBD_READ : UBD_WRITE; + io_req->op = (rq_data_dir(req) == READ) ? AIO_READ : AIO_WRITE; io_req->offsets[0] = 0; io_req->offsets[1] = dev->cow.data_offset; - io_req->buffer = req->buffer; + io_req->buffer = page_address(page) + page_offset; io_req->sectorsize = 1 << 9; + io_req->bitmap_offset = dev->cow.bitmap_offset; + io_req->bitmap_start = -1; + io_req->bitmap_end = -1; - if(dev->cow.file != NULL) - cowify_req(io_req, dev->cow.bitmap, dev->cow.bitmap_offset, - dev->cow.bitmap_len); - + if((dev->cow.file != NULL) && (io_req->op == UBD_WRITE)) + cowify_bitmap(io_req, dev->cow.bitmap); return(0); } @@ -1026,30 +996,36 @@ static void do_ubd_request(request_queue_t *q) { struct io_thread_req io_req; struct request *req; - int err, n; - - if(thread_fd == -1){ - while((req = elv_next_request(q)) != NULL){ - err = prepare_request(req, &io_req); - if(!err){ - do_io(&io_req); - __ubd_finish(req, io_req.error); - } - } - } - else { - if(do_ubd || (req = elv_next_request(q)) == NULL) - return; - err = prepare_request(req, &io_req); - if(!err){ - do_ubd = ubd_handler; - n = os_write_file(thread_fd, (char *) &io_req, - sizeof(io_req)); - if(n != sizeof(io_req)) - printk("write to io thread failed, " - "errno = %d\n", -n); + __u64 sector; + int err; + + if(in_ubd) + return; + in_ubd = 1; + while((req = elv_next_request(q)) != NULL){ + struct gendisk *disk = req->rq_disk; + struct ubd *dev = disk->private_data; + int n, i; + + blkdev_dequeue_request(req); + + sector = req->sector; + n = blk_rq_map_sg(q, req, dev->sg); + + for(i = 0; i < n; i++){ + struct scatterlist *sg = &dev->sg[i]; + + err = prepare_request(req, &io_req, sector << 9, + sg->offset, sg->length, + sg->page); + if(err) + continue; + + sector += sg->length >> 9; + do_io(&io_req, req, dev->cow.bitmap); } } + in_ubd = 0; } static int ubd_ioctl(struct inode * inode, struct file * file, @@ -1265,131 +1241,95 @@ int create_cow_file(char *cow_file, char *backing_file, struct openflags flags, return(err); } -static int update_bitmap(struct io_thread_req *req) -{ - int n; - - if(req->cow_offset == -1) - return(0); - - n = os_seek_file(req->fds[1], req->cow_offset); - if(n < 0){ - printk("do_io - bitmap lseek failed : err = %d\n", -n); - return(1); - } - - n = os_write_file(req->fds[1], &req->bitmap_words, - sizeof(req->bitmap_words)); - if(n != sizeof(req->bitmap_words)){ - printk("do_io - bitmap update failed, err = %d fd = %d\n", -n, - req->fds[1]); - return(1); - } - - return(0); -} - -void do_io(struct io_thread_req *req) +void do_io(struct io_thread_req *req, struct request *r, unsigned long *bitmap) { - char *buf; - unsigned long len; - int n, nsectors, start, end, bit; - int err; - __u64 off; - - nsectors = req->length / req->sectorsize; - start = 0; - do { - bit = ubd_test_bit(start, (unsigned char *) &req->sector_mask); - end = start; - while((end < nsectors) && - (ubd_test_bit(end, (unsigned char *) - &req->sector_mask) == bit)) - end++; - - off = req->offset + req->offsets[bit] + - start * req->sectorsize; - len = (end - start) * req->sectorsize; - buf = &req->buffer[start * req->sectorsize]; - - err = os_seek_file(req->fds[bit], off); - if(err < 0){ - printk("do_io - lseek failed : err = %d\n", -err); - req->error = 1; - return; - } - if(req->op == UBD_READ){ - n = 0; - do { - buf = &buf[n]; - len -= n; - n = os_read_file(req->fds[bit], buf, len); - if (n < 0) { - printk("do_io - read failed, err = %d " - "fd = %d\n", -n, req->fds[bit]); - req->error = 1; - return; - } - } while((n < len) && (n != 0)); - if (n < len) memset(&buf[n], 0, len - n); - } else { - n = os_write_file(req->fds[bit], buf, len); - if(n != len){ - printk("do_io - write failed err = %d " - "fd = %d\n", -n, req->fds[bit]); - req->error = 1; - return; - } - } + struct ubd_aio *aio; + struct bitmap_io *bitmap_io = NULL; + char *buf; + void *bitmap_buf = NULL; + unsigned long len, sector; + int nsectors, start, end, bit, err; + __u64 off; + + if(req->bitmap_start != -1){ + /* Round up to the nearest word */ + int round = sizeof(unsigned long); + len = (req->bitmap_end - req->bitmap_start + + round * 8 - 1) / (round * 8); + len *= round; + + off = req->bitmap_start / (8 * round); + off *= round; + + bitmap_io = kmalloc(sizeof(*bitmap_io), GFP_KERNEL); + if(bitmap_io == NULL){ + printk("Failed to kmalloc bitmap IO\n"); + req->error = 1; + return; + } - start = end; - } while(start < nsectors); + bitmap_buf = kmalloc(len, GFP_KERNEL); + if(bitmap_buf == NULL){ + printk("do_io : kmalloc of bitmap chunk " + "failed\n"); + kfree(bitmap_io); + req->error = 1; + return; + } + memcpy(bitmap_buf, &bitmap[off / sizeof(bitmap[0])], len); + + *bitmap_io = ((struct bitmap_io) + { .count = ATOMIC_INIT(0), + .aio = INIT_AIO(AIO_WRITE, req->fds[1], + bitmap_buf, len, + req->bitmap_offset + off, + ubd_reply_fd) } ); + } - req->error = update_bitmap(req); -} + nsectors = req->length / req->sectorsize; + start = 0; + end = nsectors; + bit = 0; + do { + if(bitmap != NULL){ + sector = req->offset / req->sectorsize; + bit = ubd_test_bit(sector + start, bitmap); + end = start; + while((end < nsectors) && + (ubd_test_bit(sector + end, bitmap) == bit)) + end++; + } -/* Changed in start_io_thread, which is serialized by being called only - * from ubd_init, which is an initcall. - */ -int kernel_fd = -1; + off = req->offsets[bit] + req->offset + + start * req->sectorsize; + len = (end - start) * req->sectorsize; + buf = &req->buffer[start * req->sectorsize]; -/* Only changed by the io thread */ -int io_count = 0; + aio = kmalloc(sizeof(*aio), GFP_KERNEL); + if(aio == NULL){ + req->error = 1; + return; + } -int io_thread(void *arg) -{ - struct io_thread_req req; - int n; + *aio = ((struct ubd_aio) + { .aio = INIT_AIO(req->op, req->fds[bit], buf, + len, off, ubd_reply_fd), + .len = len, + .req = r, + .bitmap = bitmap_io, + .bitmap_buf = bitmap_buf }); + + if(aio->bitmap != NULL) + atomic_inc(&aio->bitmap->count); + + err = submit_aio(&aio->aio); + if(err){ + printk("do_io - submit_aio failed, " + "err = %d\n", err); + req->error = 1; + return; + } - ignore_sigwinch_sig(); - while(1){ - n = os_read_file(kernel_fd, &req, sizeof(req)); - if(n != sizeof(req)){ - if(n < 0) - printk("io_thread - read failed, fd = %d, " - "err = %d\n", kernel_fd, -n); - else { - printk("io_thread - short read, fd = %d, " - "length = %d\n", kernel_fd, n); - } - continue; - } - io_count++; - do_io(&req); - n = os_write_file(kernel_fd, &req, sizeof(req)); - if(n != sizeof(req)) - printk("io_thread - write failed, fd = %d, err = %d\n", - kernel_fd, -n); - } + start = end; + } while(start < nsectors); } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/include/aio.h b/arch/um/include/aio.h new file mode 100644 index 000000000000..83f16877ab08 --- /dev/null +++ b/arch/um/include/aio.h @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2004 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#ifndef AIO_H__ +#define AIO_H__ + +enum aio_type { AIO_READ, AIO_WRITE, AIO_MMAP }; + +struct aio_thread_reply { + void *data; + int err; +}; + +struct aio_context { + enum aio_type type; + int fd; + void *data; + int len; + unsigned long long offset; + int reply_fd; + struct aio_context *next; +}; + +#define INIT_AIO(aio_type, aio_fd, aio_data, aio_len, aio_offset, \ + aio_reply_fd) \ + { .type = aio_type, \ + .fd = aio_fd, \ + .data = aio_data, \ + .len = aio_len, \ + .offset = aio_offset, \ + .reply_fd = aio_reply_fd } + +#define INIT_AIO_CONTEXT { .reply_fd = -1, \ + .next = NULL } + +extern int submit_aio(struct aio_context *aio); + +#endif diff --git a/arch/um/include/common-offsets.h b/arch/um/include/common-offsets.h index d705daa2d854..0aa620970adb 100644 --- a/arch/um/include/common-offsets.h +++ b/arch/um/include/common-offsets.h @@ -12,3 +12,4 @@ DEFINE_STR(UM_KERN_WARNING, KERN_WARNING); DEFINE_STR(UM_KERN_NOTICE, KERN_NOTICE); DEFINE_STR(UM_KERN_INFO, KERN_INFO); DEFINE_STR(UM_KERN_DEBUG, KERN_DEBUG); +DEFINE(HOST_ELF_CLASS, ELF_CLASS); diff --git a/arch/um/include/init.h b/arch/um/include/init.h index 55c2693f8778..cbd79a8d213d 100644 --- a/arch/um/include/init.h +++ b/arch/um/include/init.h @@ -111,7 +111,15 @@ extern struct uml_param __uml_setup_start, __uml_setup_end; #ifndef __KERNEL__ -#define __initcall(fn) static initcall_t __initcall_##fn __init_call = fn +#define __define_initcall(level,fn) \ + static initcall_t __initcall_##fn __attribute_used__ \ + __attribute__((__section__(".initcall" level ".init"))) = fn + +/* Userspace initcalls shouldn't depend on anything in the kernel, so we'll + * make them run first. + */ +#define __initcall(fn) __define_initcall("1", fn) + #define __exitcall(fn) static exitcall_t __exitcall_##fn __exit_call = fn #define __init_call __attribute__ ((unused,__section__ (".initcall.init"))) diff --git a/arch/um/include/irq_kern.h b/arch/um/include/irq_kern.h index 3af52a634c4c..c222d56b1494 100644 --- a/arch/um/include/irq_kern.h +++ b/arch/um/include/irq_kern.h @@ -7,12 +7,15 @@ #define __IRQ_KERN_H__ #include "linux/interrupt.h" +#include "asm/ptrace.h" extern int um_request_irq(unsigned int irq, int fd, int type, irqreturn_t (*handler)(int, void *, struct pt_regs *), unsigned long irqflags, const char * devname, void *dev_id); +extern int init_aio_irq(int irq, char *name, + irqreturn_t (*handler)(int, void *, struct pt_regs *)); #endif diff --git a/arch/um/include/mem.h b/arch/um/include/mem.h index 99d3ad4a03e5..e8ff0d8fa610 100644 --- a/arch/um/include/mem.h +++ b/arch/um/include/mem.h @@ -13,7 +13,17 @@ extern int physmem_subst_mapping(void *virt, int fd, __u64 offset, int w); extern int is_remapped(void *virt); extern int physmem_remove_mapping(void *virt); extern void physmem_forget_descriptor(int fd); -extern unsigned long to_phys(void *virt); + +extern unsigned long uml_physmem; +static inline unsigned long to_phys(void *virt) +{ + return(((unsigned long) virt) - uml_physmem); +} + +static inline void *to_virt(unsigned long phys) +{ + return((void *) uml_physmem + phys); +} #endif diff --git a/arch/um/include/os.h b/arch/um/include/os.h index 881d2988d2d8..4c362458052c 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -153,6 +153,11 @@ extern int os_file_type(char *file); extern int os_file_mode(char *file, struct openflags *mode_out); extern int os_lock_file(int fd, int excl); +/* start_up.c */ +extern void os_early_checks(void); +extern int can_do_skas(void); + +/* process.c */ extern unsigned long os_process_pc(int pid); extern int os_process_parent(int pid); extern void os_stop_process(int pid); @@ -161,6 +166,9 @@ extern void os_kill_ptraced_process(int pid, int reap_child); extern void os_usr1_process(int pid); extern int os_getpid(void); extern int os_getpgrp(void); +extern void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int)); +extern void init_new_thread_signals(int altstack); +extern int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr); extern int os_map_memory(void *virt, int fd, unsigned long long off, unsigned long len, int r, int w, int x); @@ -170,6 +178,13 @@ extern int os_unmap_memory(void *addr, int len); extern void os_flush_stdout(void); extern unsigned long long os_usecs(void); +/* tt.c + * for tt mode only (will be deleted in future...) + */ +extern void forward_pending_sigio(int target); +extern int start_fork_tramp(void *arg, unsigned long temp_stack, + int clone_flags, int (*tramp)(void *)); + #endif /* diff --git a/arch/um/include/syscall.h b/arch/um/include/syscall.h new file mode 100644 index 000000000000..dda1df901a08 --- /dev/null +++ b/arch/um/include/syscall.h @@ -0,0 +1,12 @@ +/* + * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#ifndef __SYSCALL_USER_H +#define __SYSCALL_USER_H + +extern int record_syscall_start(int syscall); +extern void record_syscall_end(int index, long result); + +#endif diff --git a/arch/um/include/syscall_user.h b/arch/um/include/syscall_user.h deleted file mode 100644 index 811d0ec2445e..000000000000 --- a/arch/um/include/syscall_user.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#ifndef __SYSCALL_USER_H -#define __SYSCALL_USER_H - -extern int record_syscall_start(int syscall); -extern void record_syscall_end(int index, long result); - -#endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/include/sysdep-i386/syscalls.h b/arch/um/include/sysdep-i386/syscalls.h index be0a3e3469eb..a0d5b74d3731 100644 --- a/arch/um/include/sysdep-i386/syscalls.h +++ b/arch/um/include/sysdep-i386/syscalls.h @@ -16,6 +16,8 @@ extern syscall_handler_t sys_rt_sigaction; extern syscall_handler_t old_mmap_i386; +extern syscall_handler_t *sys_call_table[]; + #define EXECUTE_SYSCALL(syscall, regs) \ ((long (*)(struct syscall_args)) (*sys_call_table[syscall]))(SYSCALL_ARGS(®s->regs)) diff --git a/arch/um/include/sysdep-x86_64/ptrace.h b/arch/um/include/sysdep-x86_64/ptrace.h index be8acd5efd97..331aa2d1f3f5 100644 --- a/arch/um/include/sysdep-x86_64/ptrace.h +++ b/arch/um/include/sysdep-x86_64/ptrace.h @@ -227,7 +227,7 @@ struct syscall_args { panic("Bad register in UPT_SET : %d\n", reg); \ break; \ } \ - val; \ + __upt_val; \ }) #define UPT_SET_SYSCALL_RETURN(r, res) \ diff --git a/arch/um/include/sysdep-x86_64/syscalls.h b/arch/um/include/sysdep-x86_64/syscalls.h index 67923cca5691..e06f83e80f4a 100644 --- a/arch/um/include/sysdep-x86_64/syscalls.h +++ b/arch/um/include/sysdep-x86_64/syscalls.h @@ -14,6 +14,8 @@ typedef long syscall_handler_t(void); extern syscall_handler_t *ia32_sys_call_table[]; +extern syscall_handler_t *sys_call_table[]; + #define EXECUTE_SYSCALL(syscall, regs) \ (((long (*)(long, long, long, long, long, long)) \ (*sys_call_table[syscall]))(UPT_SYSCALL_ARG1(®s->regs), \ diff --git a/arch/um/include/tlb.h b/arch/um/include/tlb.h index c6f9628f39bf..45d7da6c3b2c 100644 --- a/arch/um/include/tlb.h +++ b/arch/um/include/tlb.h @@ -9,7 +9,7 @@ #include "um_mmu.h" struct host_vm_op { - enum { MMAP, MUNMAP, MPROTECT } type; + enum { NONE, MMAP, MUNMAP, MPROTECT } type; union { struct { unsigned long addr; @@ -38,24 +38,10 @@ extern void mprotect_kernel_vm(int w); extern void force_flush_all(void); extern void fix_range_common(struct mm_struct *mm, unsigned long start_addr, unsigned long end_addr, int force, - void (*do_ops)(union mm_context *, - struct host_vm_op *, int)); + int (*do_ops)(union mm_context *, + struct host_vm_op *, int, int, + void **)); extern int flush_tlb_kernel_range_common(unsigned long start, unsigned long end); -extern int add_mmap(unsigned long virt, unsigned long phys, unsigned long len, - int r, int w, int x, struct host_vm_op *ops, int index, - int last_filled, union mm_context *mmu, - void (*do_ops)(union mm_context *, struct host_vm_op *, - int)); -extern int add_munmap(unsigned long addr, unsigned long len, - struct host_vm_op *ops, int index, int last_filled, - union mm_context *mmu, - void (*do_ops)(union mm_context *, struct host_vm_op *, - int)); -extern int add_mprotect(unsigned long addr, unsigned long len, int r, int w, - int x, struct host_vm_op *ops, int index, - int last_filled, union mm_context *mmu, - void (*do_ops)(union mm_context *, struct host_vm_op *, - int)); #endif diff --git a/arch/um/include/um_uaccess.h b/arch/um/include/um_uaccess.h index 6e348cb6de24..84c0868cd561 100644 --- a/arch/um/include/um_uaccess.h +++ b/arch/um/include/um_uaccess.h @@ -20,13 +20,6 @@ #define access_ok(type, addr, size) \ CHOOSE_MODE_PROC(access_ok_tt, access_ok_skas, type, addr, size) -/* this function will go away soon - use access_ok() instead */ -static inline int __deprecated verify_area(int type, const void __user *addr, unsigned long size) -{ - return (CHOOSE_MODE_PROC(verify_area_tt, verify_area_skas, type, addr, - size)); -} - static inline int copy_from_user(void *to, const void __user *from, int n) { return(CHOOSE_MODE_PROC(copy_from_user_tt, copy_from_user_skas, to, diff --git a/arch/um/include/user_util.h b/arch/um/include/user_util.h index 7b6a24dfd302..bb505e01d994 100644 --- a/arch/um/include/user_util.h +++ b/arch/um/include/user_util.h @@ -54,8 +54,6 @@ extern void stack_protections(unsigned long address); extern void task_protections(unsigned long address); extern int wait_for_stop(int pid, int sig, int cont_type, void *relay); extern void *add_signal_handler(int sig, void (*handler)(int)); -extern int start_fork_tramp(void *arg, unsigned long temp_stack, - int clone_flags, int (*tramp)(void *)); extern int linux_main(int argc, char **argv); extern void set_cmdline(char *cmd); extern void input_cb(void (*proc)(void *), void *arg, int arg_len); @@ -64,8 +62,6 @@ extern void *um_kmalloc(int size); extern int switcheroo(int fd, int prot, void *from, void *to, int size); extern void setup_machinename(char *machine_out); extern void setup_hostinfo(void); -extern void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int)); -extern void init_new_thread_signals(int altstack); extern void do_exec(int old_pid, int new_pid); extern void tracer_panic(char *msg, ...); extern char *get_umid(int only_if_set); @@ -74,16 +70,12 @@ extern int detach(int pid, int sig); extern int attach(int pid); extern void kill_child_dead(int pid); extern int cont(int pid); -extern void check_ptrace(void); extern void check_sigio(void); -extern int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr); extern void write_sigio_workaround(void); extern void arch_check_bugs(void); extern int cpu_feature(char *what, char *buf, int len); extern int arch_handle_signal(int sig, union uml_pt_regs *regs); extern int arch_fixup(unsigned long address, void *sc_ptr); -extern void forward_pending_sigio(int target); -extern int can_do_skas(void); extern void arch_init_thread(void); extern int setjmp_wrapper(void (*proc)(void *, void *), ...); extern int raw(int fd); diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index a8918e80df96..614b8ebeb0ed 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -8,25 +8,24 @@ clean-files := obj-y = config.o exec_kern.o exitcode.o \ helper.o init_task.o irq.o irq_user.o ksyms.o main.o mem.o mem_user.o \ - physmem.o process.o process_kern.o ptrace.o reboot.o resource.o \ - sigio_user.o sigio_kern.o signal_kern.o signal_user.o smp.o \ - syscall_kern.o sysrq.o tempfile.o time.o time_kern.o \ - tlb.o trap_kern.o trap_user.o uaccess_user.o um_arch.o umid.o \ - user_util.o + physmem.o process_kern.o ptrace.o reboot.o resource.o sigio_user.o \ + sigio_kern.o signal_kern.o signal_user.o smp.o syscall_kern.o sysrq.o \ + tempfile.o time.o time_kern.o tlb.o trap_kern.o trap_user.o \ + uaccess_user.o um_arch.o umid.o user_util.o obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o obj-$(CONFIG_GPROF) += gprof_syms.o obj-$(CONFIG_GCOV) += gmon_syms.o obj-$(CONFIG_TTY_LOG) += tty_log.o -obj-$(CONFIG_SYSCALL_DEBUG) += syscall_user.o +obj-$(CONFIG_SYSCALL_DEBUG) += syscall.o obj-$(CONFIG_MODE_TT) += tt/ obj-$(CONFIG_MODE_SKAS) += skas/ user-objs-$(CONFIG_TTY_LOG) += tty_log.o -USER_OBJS := $(user-objs-y) config.o helper.o main.o process.o tempfile.o \ - time.o tty_log.o umid.o user_util.o +USER_OBJS := $(user-objs-y) config.o helper.o main.o tempfile.o time.o \ + tty_log.o umid.o user_util.o include arch/um/scripts/Makefile.rules diff --git a/arch/um/kernel/asm-offsets.c b/arch/um/kernel/asm-offsets.c new file mode 100644 index 000000000000..c13a64a288f6 --- /dev/null +++ b/arch/um/kernel/asm-offsets.c @@ -0,0 +1 @@ +/* Dummy file to make kbuild happy - unused! */ diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S index 3942a5f245de..2517ecb8bf27 100644 --- a/arch/um/kernel/dyn.lds.S +++ b/arch/um/kernel/dyn.lds.S @@ -146,37 +146,8 @@ SECTIONS } _end = .; PROVIDE (end = .); - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - /* DWARF debug sections. - Symbols in the DWARF debugging sections are relative to the beginning - of the section so we begin them at 0. */ - /* DWARF 1 */ - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - /* GNU DWARF 1 extensions */ - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - /* DWARF 1.1 and DWARF 2 */ - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - /* DWARF 2 */ - .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - /* SGI/MIPS DWARF 2 extensions */ - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } + + STABS_DEBUG + + DWARF_DEBUG } diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c index 9f18061ef4c9..dcd814971995 100644 --- a/arch/um/kernel/irq.c +++ b/arch/um/kernel/irq.c @@ -31,7 +31,7 @@ #include "kern_util.h" #include "irq_user.h" #include "irq_kern.h" - +#include "os.h" /* * Generic, controller-independent functions: @@ -168,13 +168,32 @@ void __init init_IRQ(void) } } -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ +int init_aio_irq(int irq, char *name, irqreturn_t (*handler)(int, void *, + struct pt_regs *)) +{ + int fds[2], err; + + err = os_pipe(fds, 1, 1); + if(err){ + printk("init_aio_irq - os_pipe failed, err = %d\n", -err); + goto out; + } + + err = um_request_irq(irq, fds[0], IRQ_READ, handler, + SA_INTERRUPT | SA_SAMPLE_RANDOM, name, + (void *) (long) fds[0]); + if(err){ + printk("init_aio_irq - : um_request_irq failed, err = %d\n", + err); + goto out_close; + } + + err = fds[1]; + goto out; + + out_close: + os_close_file(fds[0]); + os_close_file(fds[1]); + out: + return(err); +} diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c index 99439fa15ef4..a97a72e516aa 100644 --- a/arch/um/kernel/ksyms.c +++ b/arch/um/kernel/ksyms.c @@ -34,14 +34,9 @@ EXPORT_SYMBOL(host_task_size); EXPORT_SYMBOL(arch_validate); EXPORT_SYMBOL(get_kmem_end); -EXPORT_SYMBOL(page_to_phys); -EXPORT_SYMBOL(phys_to_page); EXPORT_SYMBOL(high_physmem); EXPORT_SYMBOL(empty_zero_page); EXPORT_SYMBOL(um_virt_to_phys); -EXPORT_SYMBOL(__virt_to_page); -EXPORT_SYMBOL(to_phys); -EXPORT_SYMBOL(to_virt); EXPORT_SYMBOL(mode_tt); EXPORT_SYMBOL(handle_page_fault); EXPORT_SYMBOL(find_iomem); @@ -114,22 +109,3 @@ extern void FASTCALL( __read_lock_failed(rwlock_t *rw)); EXPORT_SYMBOL(__read_lock_failed); #endif - -#ifdef CONFIG_HIGHMEM -EXPORT_SYMBOL(kmap); -EXPORT_SYMBOL(kunmap); -EXPORT_SYMBOL(kmap_atomic); -EXPORT_SYMBOL(kunmap_atomic); -EXPORT_SYMBOL(kmap_atomic_to_page); -#endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/main.c b/arch/um/kernel/main.c index 1e1a87f1c510..d31027f0fe39 100644 --- a/arch/um/kernel/main.c +++ b/arch/um/kernel/main.c @@ -97,7 +97,7 @@ int main(int argc, char **argv, char **envp) exit(1); } -#ifdef UML_CONFIG_MODE_TT +#ifdef UML_CONFIG_CMDLINE_ON_HOST /* Allocate memory for thread command lines */ if(argc < 2 || strlen(argv[1]) < THREAD_NAME_LEN - 1){ diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index 5597bd39e6b5..64fa062cc119 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -196,7 +196,7 @@ static void init_highmem(void) static void __init fixaddr_user_init( void) { -#if CONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA +#ifdef CONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA long size = FIXADDR_USER_END - FIXADDR_USER_START; pgd_t *pgd; pud_t *pud; diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c index a24e3b7f4bf0..ea670fcc8af5 100644 --- a/arch/um/kernel/physmem.c +++ b/arch/um/kernel/physmem.c @@ -248,16 +248,6 @@ unsigned long high_physmem; extern unsigned long physmem_size; -void *to_virt(unsigned long phys) -{ - return((void *) uml_physmem + phys); -} - -unsigned long to_phys(void *virt) -{ - return(((unsigned long) virt) - uml_physmem); -} - int init_maps(unsigned long physmem, unsigned long iomem, unsigned long highmem) { struct page *p, *map; @@ -298,31 +288,6 @@ int init_maps(unsigned long physmem, unsigned long iomem, unsigned long highmem) return(0); } -struct page *phys_to_page(const unsigned long phys) -{ - return(&mem_map[phys >> PAGE_SHIFT]); -} - -struct page *__virt_to_page(const unsigned long virt) -{ - return(&mem_map[__pa(virt) >> PAGE_SHIFT]); -} - -phys_t page_to_phys(struct page *page) -{ - return((page - mem_map) << PAGE_SHIFT); -} - -pte_t mk_pte(struct page *page, pgprot_t pgprot) -{ - pte_t pte; - - pte_set_val(pte, page_to_phys(page), pgprot); - if(pte_present(pte)) - pte_mknewprot(pte_mknewpage(pte)); - return(pte); -} - /* Changed during early boot */ static unsigned long kmem_top = 0; diff --git a/arch/um/kernel/signal_kern.c b/arch/um/kernel/signal_kern.c index 7807a3e8c426..03618bd13d55 100644 --- a/arch/um/kernel/signal_kern.c +++ b/arch/um/kernel/signal_kern.c @@ -87,12 +87,12 @@ static int handle_signal(struct pt_regs *regs, unsigned long signr, recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); force_sigsegv(signr, current); - } - else if(!(ka->sa.sa_flags & SA_NODEFER)){ + } else { spin_lock_irq(¤t->sighand->siglock); sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); - sigaddset(¤t->blocked, signr); + if(!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked, signr); recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); } diff --git a/arch/um/kernel/skas/Makefile b/arch/um/kernel/skas/Makefile index d296d55ade4b..db36c7c95940 100644 --- a/arch/um/kernel/skas/Makefile +++ b/arch/um/kernel/skas/Makefile @@ -4,7 +4,7 @@ # obj-y := clone.o exec_kern.o mem.o mem_user.o mmu.o process.o process_kern.o \ - syscall_kern.o syscall_user.o tlb.o trap_user.o uaccess.o \ + syscall.o tlb.o trap_user.o uaccess.o subdir- := util diff --git a/arch/um/kernel/skas/include/mmu-skas.h b/arch/um/kernel/skas/include/mmu-skas.h index 278b72f1d9ad..09536f81ee42 100644 --- a/arch/um/kernel/skas/include/mmu-skas.h +++ b/arch/um/kernel/skas/include/mmu-skas.h @@ -6,11 +6,15 @@ #ifndef __SKAS_MMU_H #define __SKAS_MMU_H +#include "linux/config.h" #include "mm_id.h" struct mmu_context_skas { struct mm_id id; unsigned long last_page_table; +#ifdef CONFIG_3_LEVEL_PGTABLES + unsigned long last_pmd; +#endif }; extern void switch_mm_skas(struct mm_id * mm_idp); diff --git a/arch/um/kernel/skas/include/skas.h b/arch/um/kernel/skas/include/skas.h index d983ea842547..060934740f9f 100644 --- a/arch/um/kernel/skas/include/skas.h +++ b/arch/um/kernel/skas/include/skas.h @@ -24,28 +24,26 @@ extern void new_thread_proc(void *stack, void (*handler)(int sig)); extern void remove_sigstack(void); extern void new_thread_handler(int sig); extern void handle_syscall(union uml_pt_regs *regs); -extern int map(struct mm_id * mm_idp, unsigned long virt, unsigned long len, - int r, int w, int x, int phys_fd, unsigned long long offset); -extern int unmap(struct mm_id * mm_idp, void *addr, unsigned long len); +extern int map(struct mm_id * mm_idp, unsigned long virt, + unsigned long len, int r, int w, int x, int phys_fd, + unsigned long long offset, int done, void **data); +extern int unmap(struct mm_id * mm_idp, void *addr, unsigned long len, + int done, void **data); extern int protect(struct mm_id * mm_idp, unsigned long addr, - unsigned long len, int r, int w, int x); + unsigned long len, int r, int w, int x, int done, + void **data); extern void user_signal(int sig, union uml_pt_regs *regs, int pid); -extern int new_mm(int from); +extern int new_mm(int from, unsigned long stack); extern int start_userspace(unsigned long stub_stack); extern int copy_context_skas0(unsigned long stack, int pid); extern void get_skas_faultinfo(int pid, struct faultinfo * fi); extern long execute_syscall_skas(void *r); extern unsigned long current_stub_stack(void); +extern long run_syscall_stub(struct mm_id * mm_idp, + int syscall, unsigned long *args, long expected, + void **addr, int done); +extern long syscall_stub_data(struct mm_id * mm_idp, + unsigned long *data, int data_count, + void **addr, void **stub_addr); #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/skas/include/uaccess-skas.h b/arch/um/kernel/skas/include/uaccess-skas.h index cd6c280482cb..6ee3f3902e68 100644 --- a/arch/um/kernel/skas/include/uaccess-skas.h +++ b/arch/um/kernel/skas/include/uaccess-skas.h @@ -18,18 +18,18 @@ ((unsigned long) (addr) + (size) <= FIXADDR_USER_END) && \ ((unsigned long) (addr) + (size) >= (unsigned long)(addr)))) -static inline int verify_area_skas(int type, const void * addr, +static inline int verify_area_skas(int type, const void __user * addr, unsigned long size) { return(access_ok_skas(type, addr, size) ? 0 : -EFAULT); } -extern int copy_from_user_skas(void *to, const void *from, int n); -extern int copy_to_user_skas(void *to, const void *from, int n); -extern int strncpy_from_user_skas(char *dst, const char *src, int count); -extern int __clear_user_skas(void *mem, int len); -extern int clear_user_skas(void *mem, int len); -extern int strnlen_user_skas(const void *str, int len); +extern int copy_from_user_skas(void *to, const void __user *from, int n); +extern int copy_to_user_skas(void __user *to, const void *from, int n); +extern int strncpy_from_user_skas(char *dst, const char __user *src, int count); +extern int __clear_user_skas(void __user *mem, int len); +extern int clear_user_skas(void __user *mem, int len); +extern int strnlen_user_skas(const void __user *str, int len); #endif diff --git a/arch/um/kernel/skas/mem_user.c b/arch/um/kernel/skas/mem_user.c index b0980ff3bd95..1d89640bd502 100644 --- a/arch/um/kernel/skas/mem_user.c +++ b/arch/um/kernel/skas/mem_user.c @@ -5,13 +5,14 @@ #include <signal.h> #include <errno.h> +#include <string.h> #include <sys/mman.h> #include <sys/wait.h> #include <asm/page.h> #include <asm/unistd.h> #include "mem_user.h" #include "mem.h" -#include "mm_id.h" +#include "skas.h" #include "user.h" #include "os.h" #include "proc_mm.h" @@ -23,46 +24,155 @@ #include "uml-config.h" #include "sysdep/ptrace.h" #include "sysdep/stub.h" -#include "skas.h" -extern unsigned long syscall_stub, __syscall_stub_start; +extern unsigned long batch_syscall_stub, __syscall_stub_start; extern void wait_stub_done(int pid, int sig, char * fname); -static long run_syscall_stub(struct mm_id * mm_idp, int syscall, - unsigned long *args) +static inline unsigned long *check_init_stack(struct mm_id * mm_idp, + unsigned long *stack) +{ + if(stack == NULL){ + stack = (unsigned long *) mm_idp->stack + 2; + *stack = 0; + } + return stack; +} + +extern int proc_mm; + +int single_count = 0; +int multi_count = 0; +int multi_op_count = 0; + +static long do_syscall_stub(struct mm_id *mm_idp, void **addr) { + unsigned long regs[MAX_REG_NR]; + unsigned long *data; + unsigned long *syscall; + long ret, offset; int n, pid = mm_idp->u.pid; - unsigned long regs[MAX_REG_NR]; + + if(proc_mm) +#warning Need to look up userspace_pid by cpu + pid = userspace_pid[0]; + + multi_count++; get_safe_registers(regs); regs[REGS_IP_INDEX] = UML_CONFIG_STUB_CODE + - ((unsigned long) &syscall_stub - + ((unsigned long) &batch_syscall_stub - (unsigned long) &__syscall_stub_start); - /* XXX Don't have a define for starting a syscall */ - regs[REGS_SYSCALL_NR] = syscall; - regs[REGS_SYSCALL_ARG1] = args[0]; - regs[REGS_SYSCALL_ARG2] = args[1]; - regs[REGS_SYSCALL_ARG3] = args[2]; - regs[REGS_SYSCALL_ARG4] = args[3]; - regs[REGS_SYSCALL_ARG5] = args[4]; - regs[REGS_SYSCALL_ARG6] = args[5]; - n = ptrace_setregs(pid, regs); - if(n < 0){ - printk("run_syscall_stub : PTRACE_SETREGS failed, " - "errno = %d\n", n); - return(n); + n = ptrace_setregs(pid, regs); + if(n < 0) + panic("do_syscall_stub : PTRACE_SETREGS failed, errno = %d\n", + n); + + wait_stub_done(pid, 0, "do_syscall_stub"); + + /* When the stub stops, we find the following values on the + * beginning of the stack: + * (long )return_value + * (long )offset to failed sycall-data (0, if no error) + */ + ret = *((unsigned long *) mm_idp->stack); + offset = *((unsigned long *) mm_idp->stack + 1); + if (offset) { + data = (unsigned long *)(mm_idp->stack + + offset - UML_CONFIG_STUB_DATA); + syscall = (unsigned long *)((unsigned long)data + data[0]); + printk("do_syscall_stub: syscall %ld failed, return value = " + "0x%lx, expected return value = 0x%lx\n", + syscall[0], ret, syscall[7]); + printk(" syscall parameters: " + "0x%lx 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx\n", + syscall[1], syscall[2], syscall[3], + syscall[4], syscall[5], syscall[6]); + for(n = 1; n < data[0]/sizeof(long); n++) { + if(n == 1) + printk(" additional syscall data:"); + if(n % 4 == 1) + printk("\n "); + printk(" 0x%lx", data[n]); + } + if(n > 1) + printk("\n"); + } + else ret = 0; + + *addr = check_init_stack(mm_idp, NULL); + + return ret; +} + +long run_syscall_stub(struct mm_id * mm_idp, int syscall, + unsigned long *args, long expected, void **addr, + int done) +{ + unsigned long *stack = check_init_stack(mm_idp, *addr); + + if(done && *addr == NULL) + single_count++; + + *stack += sizeof(long); + stack += *stack / sizeof(long); + + *stack++ = syscall; + *stack++ = args[0]; + *stack++ = args[1]; + *stack++ = args[2]; + *stack++ = args[3]; + *stack++ = args[4]; + *stack++ = args[5]; + *stack++ = expected; + *stack = 0; + multi_op_count++; + + if(!done && ((((unsigned long) stack) & ~PAGE_MASK) < + PAGE_SIZE - 10 * sizeof(long))){ + *addr = stack; + return 0; } - wait_stub_done(pid, 0, "run_syscall_stub"); + return do_syscall_stub(mm_idp, addr); +} + +long syscall_stub_data(struct mm_id * mm_idp, + unsigned long *data, int data_count, + void **addr, void **stub_addr) +{ + unsigned long *stack; + int ret = 0; - return(*((unsigned long *) mm_idp->stack)); + /* If *addr still is uninitialized, it *must* contain NULL. + * Thus in this case do_syscall_stub correctly won't be called. + */ + if((((unsigned long) *addr) & ~PAGE_MASK) >= + PAGE_SIZE - (10 + data_count) * sizeof(long)) { + ret = do_syscall_stub(mm_idp, addr); + /* in case of error, don't overwrite data on stack */ + if(ret) + return ret; + } + + stack = check_init_stack(mm_idp, *addr); + *addr = stack; + + *stack = data_count * sizeof(long); + + memcpy(stack + 1, data, data_count * sizeof(long)); + + *stub_addr = (void *)(((unsigned long)(stack + 1) & ~PAGE_MASK) + + UML_CONFIG_STUB_DATA); + + return 0; } -int map(struct mm_id *mm_idp, unsigned long virt, unsigned long len, - int r, int w, int x, int phys_fd, unsigned long long offset) +int map(struct mm_id * mm_idp, unsigned long virt, unsigned long len, + int r, int w, int x, int phys_fd, unsigned long long offset, + int done, void **data) { - int prot, n; + int prot, ret; prot = (r ? PROT_READ : 0) | (w ? PROT_WRITE : 0) | (x ? PROT_EXEC : 0); @@ -70,6 +180,7 @@ int map(struct mm_id *mm_idp, unsigned long virt, unsigned long len, if(proc_mm){ struct proc_mm_op map; int fd = mm_idp->u.mm_fd; + map = ((struct proc_mm_op) { .op = MM_MMAP, .u = { .mmap = @@ -81,63 +192,61 @@ int map(struct mm_id *mm_idp, unsigned long virt, unsigned long len, .fd = phys_fd, .offset= offset } } } ); - n = os_write_file(fd, &map, sizeof(map)); - if(n != sizeof(map)) - printk("map : /proc/mm map failed, err = %d\n", -n); + ret = os_write_file(fd, &map, sizeof(map)); + if(ret != sizeof(map)) + printk("map : /proc/mm map failed, err = %d\n", -ret); + else ret = 0; } else { - long res; unsigned long args[] = { virt, len, prot, MAP_SHARED | MAP_FIXED, phys_fd, MMAP_OFFSET(offset) }; - res = run_syscall_stub(mm_idp, STUB_MMAP_NR, args); - if((void *) res == MAP_FAILED) - printk("mmap stub failed, errno = %d\n", res); + ret = run_syscall_stub(mm_idp, STUB_MMAP_NR, args, virt, + data, done); } - return 0; + return ret; } -int unmap(struct mm_id *mm_idp, void *addr, unsigned long len) +int unmap(struct mm_id * mm_idp, void *addr, unsigned long len, int done, + void **data) { - int n; + int ret; if(proc_mm){ struct proc_mm_op unmap; int fd = mm_idp->u.mm_fd; + unmap = ((struct proc_mm_op) { .op = MM_MUNMAP, .u = { .munmap = { .addr = (unsigned long) addr, .len = len } } } ); - n = os_write_file(fd, &unmap, sizeof(unmap)); - if(n != sizeof(unmap)) { - if(n < 0) - return(n); - else if(n > 0) - return(-EIO); - } + ret = os_write_file(fd, &unmap, sizeof(unmap)); + if(ret != sizeof(unmap)) + printk("unmap - proc_mm write returned %d\n", ret); + else ret = 0; } else { - int res; unsigned long args[] = { (unsigned long) addr, len, 0, 0, 0, 0 }; - res = run_syscall_stub(mm_idp, __NR_munmap, args); - if(res < 0) - printk("munmap stub failed, errno = %d\n", res); + ret = run_syscall_stub(mm_idp, __NR_munmap, args, 0, + data, done); + if(ret < 0) + printk("munmap stub failed, errno = %d\n", ret); } - return(0); + return ret; } -int protect(struct mm_id *mm_idp, unsigned long addr, unsigned long len, - int r, int w, int x) +int protect(struct mm_id * mm_idp, unsigned long addr, unsigned long len, + int r, int w, int x, int done, void **data) { struct proc_mm_op protect; - int prot, n; + int prot, ret; prot = (r ? PROT_READ : 0) | (w ? PROT_WRITE : 0) | (x ? PROT_EXEC : 0); @@ -152,20 +261,19 @@ int protect(struct mm_id *mm_idp, unsigned long addr, unsigned long len, .len = len, .prot = prot } } } ); - n = os_write_file(fd, &protect, sizeof(protect)); - if(n != sizeof(protect)) - panic("protect failed, err = %d", -n); + ret = os_write_file(fd, &protect, sizeof(protect)); + if(ret != sizeof(protect)) + printk("protect failed, err = %d", -ret); + else ret = 0; } else { - int res; unsigned long args[] = { addr, len, prot, 0, 0, 0 }; - res = run_syscall_stub(mm_idp, __NR_mprotect, args); - if(res < 0) - panic("mprotect stub failed, errno = %d\n", res); + ret = run_syscall_stub(mm_idp, __NR_mprotect, args, 0, + data, done); } - return(0); + return ret; } void before_mem_skas(unsigned long unused) diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c index d232daa42c31..240143b616a2 100644 --- a/arch/um/kernel/skas/mmu.c +++ b/arch/um/kernel/skas/mmu.c @@ -56,6 +56,9 @@ static int init_stub_pte(struct mm_struct *mm, unsigned long proc, */ mm->context.skas.last_page_table = pmd_page_kernel(*pmd); +#ifdef CONFIG_3_LEVEL_PGTABLES + mm->context.skas.last_pmd = (unsigned long) __va(pud_val(*pud)); +#endif *pte = mk_pte(virt_to_page(kernel), __pgprot(_PAGE_PRESENT)); *pte = pte_mkexec(*pte); @@ -77,23 +80,14 @@ int init_new_context_skas(struct task_struct *task, struct mm_struct *mm) struct mm_struct *cur_mm = current->mm; struct mm_id *cur_mm_id = &cur_mm->context.skas.id; struct mm_id *mm_id = &mm->context.skas.id; - unsigned long stack; - int from, ret; + unsigned long stack = 0; + int from, ret = -ENOMEM; - if(proc_mm){ - if((cur_mm != NULL) && (cur_mm != &init_mm)) - from = cur_mm->context.skas.id.u.mm_fd; - else from = -1; + if(!proc_mm || !ptrace_faultinfo){ + stack = get_zeroed_page(GFP_KERNEL); + if(stack == 0) + goto out; - ret = new_mm(from); - if(ret < 0){ - printk("init_new_context_skas - new_mm failed, " - "errno = %d\n", ret); - return ret; - } - mm_id->u.mm_fd = ret; - } - else { /* This zeros the entry that pgd_alloc didn't, needed since * we are about to reinitialize it, and want mm.nr_ptes to * be accurate. @@ -103,20 +97,30 @@ int init_new_context_skas(struct task_struct *task, struct mm_struct *mm) ret = init_stub_pte(mm, CONFIG_STUB_CODE, (unsigned long) &__syscall_stub_start); if(ret) - goto out; - - ret = -ENOMEM; - stack = get_zeroed_page(GFP_KERNEL); - if(stack == 0) - goto out; - mm_id->stack = stack; + goto out_free; ret = init_stub_pte(mm, CONFIG_STUB_DATA, stack); if(ret) goto out_free; mm->nr_ptes--; + } + mm_id->stack = stack; + if(proc_mm){ + if((cur_mm != NULL) && (cur_mm != &init_mm)) + from = cur_mm_id->u.mm_fd; + else from = -1; + + ret = new_mm(from, stack); + if(ret < 0){ + printk("init_new_context_skas - new_mm failed, " + "errno = %d\n", ret); + goto out_free; + } + mm_id->u.mm_fd = ret; + } + else { if((cur_mm != NULL) && (cur_mm != &init_mm)) mm_id->u.pid = copy_context_skas0(stack, cur_mm_id->u.pid); @@ -126,7 +130,8 @@ int init_new_context_skas(struct task_struct *task, struct mm_struct *mm) return 0; out_free: - free_page(mm_id->stack); + if(mm_id->stack != 0) + free_page(mm_id->stack); out: return ret; } @@ -137,9 +142,15 @@ void destroy_context_skas(struct mm_struct *mm) if(proc_mm) os_close_file(mmu->id.u.mm_fd); - else { + else os_kill_ptraced_process(mmu->id.u.pid, 1); + + if(!proc_mm || !ptrace_faultinfo){ free_page(mmu->id.stack); - free_page(mmu->last_page_table); + pte_free_kernel((pte_t *) mmu->last_page_table); + dec_page_state(nr_page_table_pages); +#ifdef CONFIG_3_LEVEL_PGTABLES + pmd_free((pmd_t *) mmu->last_pmd); +#endif } } diff --git a/arch/um/kernel/skas/process.c b/arch/um/kernel/skas/process.c index f228f8b54194..5cd0e9929789 100644 --- a/arch/um/kernel/skas/process.c +++ b/arch/um/kernel/skas/process.c @@ -138,6 +138,8 @@ static void handle_trap(int pid, union uml_pt_regs *regs, int local_using_sysemu } extern int __syscall_stub_start; +int stub_code_fd = -1; +__u64 stub_code_offset; static int userspace_tramp(void *stack) { @@ -152,31 +154,31 @@ static int userspace_tramp(void *stack) /* This has a pte, but it can't be mapped in with the usual * tlb_flush mechanism because this is part of that mechanism */ - int fd; - __u64 offset; - - fd = phys_mapping(to_phys(&__syscall_stub_start), &offset); addr = mmap64((void *) UML_CONFIG_STUB_CODE, page_size(), - PROT_EXEC, MAP_FIXED | MAP_PRIVATE, fd, offset); + PROT_EXEC, MAP_FIXED | MAP_PRIVATE, + stub_code_fd, stub_code_offset); if(addr == MAP_FAILED){ - printk("mapping mmap stub failed, errno = %d\n", + printk("mapping stub code failed, errno = %d\n", errno); exit(1); } if(stack != NULL){ + int fd; + __u64 offset; + fd = phys_mapping(to_phys(stack), &offset); addr = mmap((void *) UML_CONFIG_STUB_DATA, page_size(), PROT_READ | PROT_WRITE, MAP_FIXED | MAP_SHARED, fd, offset); if(addr == MAP_FAILED){ - printk("mapping segfault stack failed, " + printk("mapping stub stack failed, " "errno = %d\n", errno); exit(1); } } } - if(!ptrace_faultinfo && (stack != NULL)){ + if(!ptrace_faultinfo){ unsigned long v = UML_CONFIG_STUB_CODE + (unsigned long) stub_segv_handler - (unsigned long) &__syscall_stub_start; @@ -202,6 +204,10 @@ int start_userspace(unsigned long stub_stack) unsigned long sp; int pid, status, n, flags; + if ( stub_code_fd == -1 ) + stub_code_fd = phys_mapping(to_phys(&__syscall_stub_start), + &stub_code_offset); + stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if(stack == MAP_FAILED) @@ -363,6 +369,53 @@ int copy_context_skas0(unsigned long new_stack, int pid) return pid; } +/* + * This is used only, if proc_mm is available, while PTRACE_FAULTINFO + * isn't. Opening /proc/mm creates a new mm_context, which lacks the stub-pages + * Thus, we map them using /proc/mm-fd + */ +void map_stub_pages(int fd, unsigned long code, + unsigned long data, unsigned long stack) +{ + struct proc_mm_op mmop; + int n; + + mmop = ((struct proc_mm_op) { .op = MM_MMAP, + .u = + { .mmap = + { .addr = code, + .len = PAGE_SIZE, + .prot = PROT_EXEC, + .flags = MAP_FIXED | MAP_PRIVATE, + .fd = stub_code_fd, + .offset = stub_code_offset + } } }); + n = os_write_file(fd, &mmop, sizeof(mmop)); + if(n != sizeof(mmop)) + panic("map_stub_pages : /proc/mm map for code failed, " + "err = %d\n", -n); + + if ( stack ) { + __u64 map_offset; + int map_fd = phys_mapping(to_phys((void *)stack), &map_offset); + mmop = ((struct proc_mm_op) + { .op = MM_MMAP, + .u = + { .mmap = + { .addr = data, + .len = PAGE_SIZE, + .prot = PROT_READ | PROT_WRITE, + .flags = MAP_FIXED | MAP_SHARED, + .fd = map_fd, + .offset = map_offset + } } }); + n = os_write_file(fd, &mmop, sizeof(mmop)); + if(n != sizeof(mmop)) + panic("map_stub_pages : /proc/mm map for data failed, " + "err = %d\n", -n); + } +} + void new_thread(void *stack, void **switch_buf_ptr, void **fork_buf_ptr, void (*handler)(int)) { diff --git a/arch/um/kernel/skas/process_kern.c b/arch/um/kernel/skas/process_kern.c index cbabab104ac3..3d1b227226e6 100644 --- a/arch/um/kernel/skas/process_kern.c +++ b/arch/um/kernel/skas/process_kern.c @@ -129,7 +129,9 @@ int copy_thread_skas(int nr, unsigned long clone_flags, unsigned long sp, return(0); } -int new_mm(int from) +extern void map_stub_pages(int fd, unsigned long code, + unsigned long data, unsigned long stack); +int new_mm(int from, unsigned long stack) { struct proc_mm_op copy; int n, fd; @@ -148,6 +150,9 @@ int new_mm(int from) "err = %d\n", -n); } + if(!ptrace_faultinfo) + map_stub_pages(fd, CONFIG_STUB_CODE, CONFIG_STUB_DATA, stack); + return(fd); } diff --git a/arch/um/kernel/skas/syscall.c b/arch/um/kernel/skas/syscall.c new file mode 100644 index 000000000000..51fb94076fcf --- /dev/null +++ b/arch/um/kernel/skas/syscall.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include "linux/sys.h" +#include "linux/ptrace.h" +#include "asm/errno.h" +#include "asm/unistd.h" +#include "asm/ptrace.h" +#include "asm/current.h" +#include "sysdep/syscalls.h" +#include "kern_util.h" +#include "syscall.h" + +void handle_syscall(union uml_pt_regs *r) +{ + struct pt_regs *regs = container_of(r, struct pt_regs, regs); + long result; + int syscall; +#ifdef UML_CONFIG_SYSCALL_DEBUG + int index; + + index = record_syscall_start(UPT_SYSCALL_NR(r)); +#endif + syscall_trace(r, 0); + + current->thread.nsyscalls++; + nsyscalls++; + + /* This should go in the declaration of syscall, but when I do that, + * strace -f -c bash -c 'ls ; ls' breaks, sometimes not tracing + * children at all, sometimes hanging when bash doesn't see the first + * ls exit. + * The assembly looks functionally the same to me. This is + * gcc version 4.0.1 20050727 (Red Hat 4.0.1-5) + * in case it's a compiler bug. + */ + syscall = UPT_SYSCALL_NR(r); + if((syscall >= NR_syscalls) || (syscall < 0)) + result = -ENOSYS; + else result = EXECUTE_SYSCALL(syscall, regs); + + REGS_SET_SYSCALL_RETURN(r->skas.regs, result); + + syscall_trace(r, 1); +#ifdef UML_CONFIG_SYSCALL_DEBUG + record_syscall_end(index, result); +#endif +} diff --git a/arch/um/kernel/skas/syscall_kern.c b/arch/um/kernel/skas/syscall_kern.c deleted file mode 100644 index bdf040ce5b8e..000000000000 --- a/arch/um/kernel/skas/syscall_kern.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 2002 - 2003 Jeff Dike (jdike@addtoit.com) - * Licensed under the GPL - */ - -#include "linux/sys.h" -#include "linux/ptrace.h" -#include "asm/errno.h" -#include "asm/unistd.h" -#include "asm/ptrace.h" -#include "asm/current.h" -#include "sysdep/syscalls.h" -#include "kern_util.h" - -extern syscall_handler_t *sys_call_table[]; - -long execute_syscall_skas(void *r) -{ - struct pt_regs *regs = r; - long res; - int syscall; - - current->thread.nsyscalls++; - nsyscalls++; - syscall = UPT_SYSCALL_NR(®s->regs); - - if((syscall >= NR_syscalls) || (syscall < 0)) - res = -ENOSYS; - else res = EXECUTE_SYSCALL(syscall, regs); - - return(res); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/skas/syscall_user.c b/arch/um/kernel/skas/syscall_user.c deleted file mode 100644 index 6b0664970147..000000000000 --- a/arch/um/kernel/skas/syscall_user.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include <stdlib.h> -#include <signal.h> -#include "kern_util.h" -#include "uml-config.h" -#include "syscall_user.h" -#include "sysdep/ptrace.h" -#include "sysdep/sigcontext.h" -#include "skas.h" - -void handle_syscall(union uml_pt_regs *regs) -{ - long result; -#ifdef UML_CONFIG_SYSCALL_DEBUG - int index; - - index = record_syscall_start(UPT_SYSCALL_NR(regs)); -#endif - - syscall_trace(regs, 0); - result = execute_syscall_skas(regs); - - REGS_SET_SYSCALL_RETURN(regs->skas.regs, result); - - syscall_trace(regs, 1); -#ifdef UML_CONFIG_SYSCALL_DEBUG - record_syscall_end(index, result); -#endif -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/skas/tlb.c b/arch/um/kernel/skas/tlb.c index 6230999c672c..6e84963dfc29 100644 --- a/arch/um/kernel/skas/tlb.c +++ b/arch/um/kernel/skas/tlb.c @@ -18,33 +18,39 @@ #include "os.h" #include "tlb.h" -static void do_ops(union mm_context *mmu, struct host_vm_op *ops, int last) +static int do_ops(union mm_context *mmu, struct host_vm_op *ops, int last, + int finished, void **flush) { struct host_vm_op *op; - int i; + int i, ret = 0; - for(i = 0; i <= last; i++){ + for(i = 0; i <= last && !ret; i++){ op = &ops[i]; switch(op->type){ case MMAP: - map(&mmu->skas.id, op->u.mmap.addr, op->u.mmap.len, - op->u.mmap.r, op->u.mmap.w, op->u.mmap.x, - op->u.mmap.fd, op->u.mmap.offset); + ret = map(&mmu->skas.id, op->u.mmap.addr, + op->u.mmap.len, op->u.mmap.r, op->u.mmap.w, + op->u.mmap.x, op->u.mmap.fd, + op->u.mmap.offset, finished, flush); break; case MUNMAP: - unmap(&mmu->skas.id, (void *) op->u.munmap.addr, - op->u.munmap.len); + ret = unmap(&mmu->skas.id, + (void *) op->u.munmap.addr, + op->u.munmap.len, finished, flush); break; case MPROTECT: - protect(&mmu->skas.id, op->u.mprotect.addr, - op->u.mprotect.len, op->u.mprotect.r, - op->u.mprotect.w, op->u.mprotect.x); + ret = protect(&mmu->skas.id, op->u.mprotect.addr, + op->u.mprotect.len, op->u.mprotect.r, + op->u.mprotect.w, op->u.mprotect.x, + finished, flush); break; default: printk("Unknown op type %d in do_ops\n", op->type); break; } } + + return ret; } extern int proc_mm; diff --git a/arch/um/kernel/syscall.c b/arch/um/kernel/syscall.c new file mode 100644 index 000000000000..1429c131879d --- /dev/null +++ b/arch/um/kernel/syscall.c @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include "kern_util.h" +#include "syscall.h" +#include "os.h" + +struct { + int syscall; + int pid; + long result; + unsigned long long start; + unsigned long long end; +} syscall_record[1024]; + +int record_syscall_start(int syscall) +{ + int max, index; + + max = sizeof(syscall_record)/sizeof(syscall_record[0]); + index = next_syscall_index(max); + + syscall_record[index].syscall = syscall; + syscall_record[index].pid = current_pid(); + syscall_record[index].result = 0xdeadbeef; + syscall_record[index].start = os_usecs(); + return(index); +} + +void record_syscall_end(int index, long result) +{ + syscall_record[index].result = result; + syscall_record[index].end = os_usecs(); +} diff --git a/arch/um/kernel/syscall_user.c b/arch/um/kernel/syscall_user.c deleted file mode 100644 index 01b711e00a85..000000000000 --- a/arch/um/kernel/syscall_user.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include <stdlib.h> -#include <sys/time.h> -#include "kern_util.h" -#include "syscall_user.h" - -struct { - int syscall; - int pid; - long result; - struct timeval start; - struct timeval end; -} syscall_record[1024]; - -int record_syscall_start(int syscall) -{ - int max, index; - - max = sizeof(syscall_record)/sizeof(syscall_record[0]); - index = next_syscall_index(max); - - syscall_record[index].syscall = syscall; - syscall_record[index].pid = current_pid(); - syscall_record[index].result = 0xdeadbeef; - gettimeofday(&syscall_record[index].start, NULL); - return(index); -} - -void record_syscall_end(int index, long result) -{ - syscall_record[index].result = result; - gettimeofday(&syscall_record[index].end, NULL); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/tlb.c b/arch/um/kernel/tlb.c index 83ec8d4747fd..80ed6188e8a2 100644 --- a/arch/um/kernel/tlb.c +++ b/arch/um/kernel/tlb.c @@ -15,12 +15,118 @@ #include "mem_user.h" #include "os.h" +static int add_mmap(unsigned long virt, unsigned long phys, unsigned long len, + int r, int w, int x, struct host_vm_op *ops, int *index, + int last_filled, union mm_context *mmu, void **flush, + int (*do_ops)(union mm_context *, struct host_vm_op *, + int, int, void **)) +{ + __u64 offset; + struct host_vm_op *last; + int fd, ret = 0; + + fd = phys_mapping(phys, &offset); + if(*index != -1){ + last = &ops[*index]; + if((last->type == MMAP) && + (last->u.mmap.addr + last->u.mmap.len == virt) && + (last->u.mmap.r == r) && (last->u.mmap.w == w) && + (last->u.mmap.x == x) && (last->u.mmap.fd == fd) && + (last->u.mmap.offset + last->u.mmap.len == offset)){ + last->u.mmap.len += len; + return 0; + } + } + + if(*index == last_filled){ + ret = (*do_ops)(mmu, ops, last_filled, 0, flush); + *index = -1; + } + + ops[++*index] = ((struct host_vm_op) { .type = MMAP, + .u = { .mmap = { + .addr = virt, + .len = len, + .r = r, + .w = w, + .x = x, + .fd = fd, + .offset = offset } + } }); + return ret; +} + +static int add_munmap(unsigned long addr, unsigned long len, + struct host_vm_op *ops, int *index, int last_filled, + union mm_context *mmu, void **flush, + int (*do_ops)(union mm_context *, struct host_vm_op *, + int, int, void **)) +{ + struct host_vm_op *last; + int ret = 0; + + if(*index != -1){ + last = &ops[*index]; + if((last->type == MUNMAP) && + (last->u.munmap.addr + last->u.mmap.len == addr)){ + last->u.munmap.len += len; + return 0; + } + } + + if(*index == last_filled){ + ret = (*do_ops)(mmu, ops, last_filled, 0, flush); + *index = -1; + } + + ops[++*index] = ((struct host_vm_op) { .type = MUNMAP, + .u = { .munmap = { + .addr = addr, + .len = len } } }); + return ret; +} + +static int add_mprotect(unsigned long addr, unsigned long len, int r, int w, + int x, struct host_vm_op *ops, int *index, + int last_filled, union mm_context *mmu, void **flush, + int (*do_ops)(union mm_context *, struct host_vm_op *, + int, int, void **)) +{ + struct host_vm_op *last; + int ret = 0; + + if(*index != -1){ + last = &ops[*index]; + if((last->type == MPROTECT) && + (last->u.mprotect.addr + last->u.mprotect.len == addr) && + (last->u.mprotect.r == r) && (last->u.mprotect.w == w) && + (last->u.mprotect.x == x)){ + last->u.mprotect.len += len; + return 0; + } + } + + if(*index == last_filled){ + ret = (*do_ops)(mmu, ops, last_filled, 0, flush); + *index = -1; + } + + ops[++*index] = ((struct host_vm_op) { .type = MPROTECT, + .u = { .mprotect = { + .addr = addr, + .len = len, + .r = r, + .w = w, + .x = x } } }); + return ret; +} + #define ADD_ROUND(n, inc) (((n) + (inc)) & ~((inc) - 1)) void fix_range_common(struct mm_struct *mm, unsigned long start_addr, unsigned long end_addr, int force, - void (*do_ops)(union mm_context *, struct host_vm_op *, - int)) + int (*do_ops)(union mm_context *, struct host_vm_op *, + int, int, void **)) { pgd_t *npgd; pud_t *npud; @@ -29,21 +135,24 @@ void fix_range_common(struct mm_struct *mm, unsigned long start_addr, union mm_context *mmu = &mm->context; unsigned long addr, end; int r, w, x; - struct host_vm_op ops[16]; + struct host_vm_op ops[1]; + void *flush = NULL; int op_index = -1, last_op = sizeof(ops) / sizeof(ops[0]) - 1; + int ret = 0; if(mm == NULL) return; - for(addr = start_addr; addr < end_addr;){ + ops[0].type = NONE; + for(addr = start_addr; addr < end_addr && !ret;){ npgd = pgd_offset(mm, addr); if(!pgd_present(*npgd)){ end = ADD_ROUND(addr, PGDIR_SIZE); if(end > end_addr) end = end_addr; if(force || pgd_newpage(*npgd)){ - op_index = add_munmap(addr, end - addr, ops, - op_index, last_op, mmu, - do_ops); + ret = add_munmap(addr, end - addr, ops, + &op_index, last_op, mmu, + &flush, do_ops); pgd_mkuptodate(*npgd); } addr = end; @@ -56,9 +165,9 @@ void fix_range_common(struct mm_struct *mm, unsigned long start_addr, if(end > end_addr) end = end_addr; if(force || pud_newpage(*npud)){ - op_index = add_munmap(addr, end - addr, ops, - op_index, last_op, mmu, - do_ops); + ret = add_munmap(addr, end - addr, ops, + &op_index, last_op, mmu, + &flush, do_ops); pud_mkuptodate(*npud); } addr = end; @@ -71,9 +180,9 @@ void fix_range_common(struct mm_struct *mm, unsigned long start_addr, if(end > end_addr) end = end_addr; if(force || pmd_newpage(*npmd)){ - op_index = add_munmap(addr, end - addr, ops, - op_index, last_op, mmu, - do_ops); + ret = add_munmap(addr, end - addr, ops, + &op_index, last_op, mmu, + &flush, do_ops); pmd_mkuptodate(*npmd); } addr = end; @@ -92,24 +201,32 @@ void fix_range_common(struct mm_struct *mm, unsigned long start_addr, } if(force || pte_newpage(*npte)){ if(pte_present(*npte)) - op_index = add_mmap(addr, - pte_val(*npte) & PAGE_MASK, - PAGE_SIZE, r, w, x, ops, - op_index, last_op, mmu, - do_ops); - else op_index = add_munmap(addr, PAGE_SIZE, ops, - op_index, last_op, mmu, - do_ops); + ret = add_mmap(addr, + pte_val(*npte) & PAGE_MASK, + PAGE_SIZE, r, w, x, ops, + &op_index, last_op, mmu, + &flush, do_ops); + else ret = add_munmap(addr, PAGE_SIZE, ops, + &op_index, last_op, mmu, + &flush, do_ops); } else if(pte_newprot(*npte)) - op_index = add_mprotect(addr, PAGE_SIZE, r, w, x, ops, - op_index, last_op, mmu, - do_ops); + ret = add_mprotect(addr, PAGE_SIZE, r, w, x, ops, + &op_index, last_op, mmu, + &flush, do_ops); *npte = pte_mkuptodate(*npte); addr += PAGE_SIZE; } - (*do_ops)(mmu, ops, op_index); + + if(!ret) + ret = (*do_ops)(mmu, ops, op_index, 1, &flush); + + /* This is not an else because ret is modified above */ + if(ret) { + printk("fix_range_common: failed, killing current process\n"); + force_sig(SIGKILL, current); + } } int flush_tlb_kernel_range_common(unsigned long start, unsigned long end) @@ -226,106 +343,6 @@ pte_t *addr_pte(struct task_struct *task, unsigned long addr) return(pte_offset_map(pmd, addr)); } -int add_mmap(unsigned long virt, unsigned long phys, unsigned long len, - int r, int w, int x, struct host_vm_op *ops, int index, - int last_filled, union mm_context *mmu, - void (*do_ops)(union mm_context *, struct host_vm_op *, int)) -{ - __u64 offset; - struct host_vm_op *last; - int fd; - - fd = phys_mapping(phys, &offset); - if(index != -1){ - last = &ops[index]; - if((last->type == MMAP) && - (last->u.mmap.addr + last->u.mmap.len == virt) && - (last->u.mmap.r == r) && (last->u.mmap.w == w) && - (last->u.mmap.x == x) && (last->u.mmap.fd == fd) && - (last->u.mmap.offset + last->u.mmap.len == offset)){ - last->u.mmap.len += len; - return(index); - } - } - - if(index == last_filled){ - (*do_ops)(mmu, ops, last_filled); - index = -1; - } - - ops[++index] = ((struct host_vm_op) { .type = MMAP, - .u = { .mmap = { - .addr = virt, - .len = len, - .r = r, - .w = w, - .x = x, - .fd = fd, - .offset = offset } - } }); - return(index); -} - -int add_munmap(unsigned long addr, unsigned long len, struct host_vm_op *ops, - int index, int last_filled, union mm_context *mmu, - void (*do_ops)(union mm_context *, struct host_vm_op *, int)) -{ - struct host_vm_op *last; - - if(index != -1){ - last = &ops[index]; - if((last->type == MUNMAP) && - (last->u.munmap.addr + last->u.mmap.len == addr)){ - last->u.munmap.len += len; - return(index); - } - } - - if(index == last_filled){ - (*do_ops)(mmu, ops, last_filled); - index = -1; - } - - ops[++index] = ((struct host_vm_op) { .type = MUNMAP, - .u = { .munmap = { - .addr = addr, - .len = len } } }); - return(index); -} - -int add_mprotect(unsigned long addr, unsigned long len, int r, int w, int x, - struct host_vm_op *ops, int index, int last_filled, - union mm_context *mmu, - void (*do_ops)(union mm_context *, struct host_vm_op *, int)) -{ - struct host_vm_op *last; - - if(index != -1){ - last = &ops[index]; - if((last->type == MPROTECT) && - (last->u.mprotect.addr + last->u.mprotect.len == addr) && - (last->u.mprotect.r == r) && (last->u.mprotect.w == w) && - (last->u.mprotect.x == x)){ - last->u.mprotect.len += len; - return(index); - } - } - - if(index == last_filled){ - (*do_ops)(mmu, ops, last_filled); - index = -1; - } - - ops[++index] = ((struct host_vm_op) { .type = MPROTECT, - .u = { .mprotect = { - .addr = addr, - .len = len, - .r = r, - .w = w, - .x = x } } }); - return(index); -} - void flush_tlb_page(struct vm_area_struct *vma, unsigned long address) { address &= PAGE_MASK; diff --git a/arch/um/kernel/trap_kern.c b/arch/um/kernel/trap_kern.c index c20aef120598..87cc6fd76ced 100644 --- a/arch/um/kernel/trap_kern.c +++ b/arch/um/kernel/trap_kern.c @@ -26,6 +26,7 @@ #include "mem.h" #include "mem_kern.h" +/* Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by segv(). */ int handle_page_fault(unsigned long address, unsigned long ip, int is_write, int is_user, int *code_out) { @@ -35,7 +36,6 @@ int handle_page_fault(unsigned long address, unsigned long ip, pud_t *pud; pmd_t *pmd; pte_t *pte; - unsigned long page; int err = -EFAULT; *code_out = SEGV_MAPERR; @@ -52,17 +52,17 @@ int handle_page_fault(unsigned long address, unsigned long ip, else if(expand_stack(vma, address)) goto out; - good_area: +good_area: *code_out = SEGV_ACCERR; if(is_write && !(vma->vm_flags & VM_WRITE)) goto out; - if(!(vma->vm_flags & (VM_READ | VM_EXEC))) + /* Don't require VM_READ|VM_EXEC for write faults! */ + if(!is_write && !(vma->vm_flags & (VM_READ | VM_EXEC))) goto out; - page = address & PAGE_MASK; do { - survive: +survive: switch (handle_mm_fault(mm, vma, address, is_write)){ case VM_FAULT_MINOR: current->min_flt++; @@ -79,16 +79,15 @@ int handle_page_fault(unsigned long address, unsigned long ip, default: BUG(); } - pgd = pgd_offset(mm, page); - pud = pud_offset(pgd, page); - pmd = pmd_offset(pud, page); - pte = pte_offset_kernel(pmd, page); + pgd = pgd_offset(mm, address); + pud = pud_offset(pgd, address); + pmd = pmd_offset(pud, address); + pte = pte_offset_kernel(pmd, address); } while(!pte_present(*pte)); err = 0; - *pte = pte_mkyoung(*pte); - if(pte_write(*pte)) *pte = pte_mkdirty(*pte); - flush_tlb_page(vma, page); - out: + WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte))); + flush_tlb_page(vma, address); +out: up_read(&mm->mmap_sem); return(err); @@ -144,19 +143,18 @@ unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc) panic("Kernel mode fault at addr 0x%lx, ip 0x%lx", address, ip); - if(err == -EACCES){ + if (err == -EACCES) { si.si_signo = SIGBUS; si.si_errno = 0; si.si_code = BUS_ADRERR; si.si_addr = (void *)address; current->thread.arch.faultinfo = fi; force_sig_info(SIGBUS, &si, current); - } - else if(err == -ENOMEM){ + } else if (err == -ENOMEM) { printk("VM: killing process %s\n", current->comm); do_exit(SIGKILL); - } - else { + } else { + BUG_ON(err != -EFAULT); si.si_signo = SIGSEGV; si.si_addr = (void *) address; current->thread.arch.faultinfo = fi; @@ -200,30 +198,3 @@ void winch(int sig, union uml_pt_regs *regs) void trap_init(void) { } - -DEFINE_SPINLOCK(trap_lock); - -static int trap_index = 0; - -int next_trap_index(int limit) -{ - int ret; - - spin_lock(&trap_lock); - ret = trap_index; - if(++trap_index == limit) - trap_index = 0; - spin_unlock(&trap_lock); - return(ret); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/trap_user.c b/arch/um/kernel/trap_user.c index f825a6eda3f5..e9ccd6b8d3c7 100644 --- a/arch/um/kernel/trap_user.c +++ b/arch/um/kernel/trap_user.c @@ -40,35 +40,14 @@ void kill_child_dead(int pid) } while(1); } -/* Unlocked - don't care if this is a bit off */ -int nsegfaults = 0; - -struct { - unsigned long address; - int is_write; - int pid; - unsigned long sp; - int is_user; -} segfault_record[1024]; - void segv_handler(int sig, union uml_pt_regs *regs) { - int index, max; struct faultinfo * fi = UPT_FAULTINFO(regs); if(UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)){ bad_segv(*fi, UPT_IP(regs)); return; } - max = sizeof(segfault_record)/sizeof(segfault_record[0]); - index = next_trap_index(max); - - nsegfaults++; - segfault_record[index].address = FAULT_ADDRESS(*fi); - segfault_record[index].pid = os_getpid(); - segfault_record[index].is_write = FAULT_WRITE(*fi); - segfault_record[index].sp = UPT_SP(regs); - segfault_record[index].is_user = UPT_IS_USER(regs); segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs); } diff --git a/arch/um/kernel/tt/include/uaccess-tt.h b/arch/um/kernel/tt/include/uaccess-tt.h index 3fbb5fe26f49..aa6db384af80 100644 --- a/arch/um/kernel/tt/include/uaccess-tt.h +++ b/arch/um/kernel/tt/include/uaccess-tt.h @@ -33,7 +33,7 @@ extern unsigned long uml_physmem; (((unsigned long) (addr) <= ((unsigned long) (addr) + (size))) && \ (under_task_size(addr, size) || is_stack(addr, size)))) -static inline int verify_area_tt(int type, const void * addr, +static inline int verify_area_tt(int type, const void __user * addr, unsigned long size) { return(access_ok_tt(type, addr, size) ? 0 : -EFAULT); @@ -50,12 +50,12 @@ extern int __do_clear_user(void *mem, size_t len, void **fault_addr, extern int __do_strnlen_user(const char *str, unsigned long n, void **fault_addr, void **fault_catcher); -extern int copy_from_user_tt(void *to, const void *from, int n); -extern int copy_to_user_tt(void *to, const void *from, int n); -extern int strncpy_from_user_tt(char *dst, const char *src, int count); -extern int __clear_user_tt(void *mem, int len); -extern int clear_user_tt(void *mem, int len); -extern int strnlen_user_tt(const void *str, int len); +extern int copy_from_user_tt(void *to, const void __user *from, int n); +extern int copy_to_user_tt(void __user *to, const void *from, int n); +extern int strncpy_from_user_tt(char *dst, const char __user *src, int count); +extern int __clear_user_tt(void __user *mem, int len); +extern int clear_user_tt(void __user *mem, int len); +extern int strnlen_user_tt(const void __user *str, int len); #endif diff --git a/arch/um/kernel/tt/syscall_kern.c b/arch/um/kernel/tt/syscall_kern.c index 2650a628719e..3d29c90514cc 100644 --- a/arch/um/kernel/tt/syscall_kern.c +++ b/arch/um/kernel/tt/syscall_kern.c @@ -12,36 +12,41 @@ #include "asm/uaccess.h" #include "asm/stat.h" #include "sysdep/syscalls.h" +#include "sysdep/sigcontext.h" #include "kern_util.h" +#include "syscall.h" -extern syscall_handler_t *sys_call_table[]; - -long execute_syscall_tt(void *r) +void syscall_handler_tt(int sig, struct pt_regs *regs) { - struct pt_regs *regs = r; - long res; + void *sc; + long result; int syscall; - #ifdef CONFIG_SYSCALL_DEBUG + int index; + index = record_syscall_start(syscall); +#endif + sc = UPT_SC(®s->regs); + SC_START_SYSCALL(sc); + + syscall_trace(®s->regs, 0); + current->thread.nsyscalls++; nsyscalls++; -#endif syscall = UPT_SYSCALL_NR(®s->regs); if((syscall >= NR_syscalls) || (syscall < 0)) - res = -ENOSYS; - else res = EXECUTE_SYSCALL(syscall, regs); + result = -ENOSYS; + else result = EXECUTE_SYSCALL(syscall, regs); - return(res); -} + /* regs->sc may have changed while the system call ran (there may + * have been an interrupt or segfault), so it needs to be refreshed. + */ + UPT_SC(®s->regs) = sc; -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ + SC_SET_SYSCALL_RETURN(sc, result); + + syscall_trace(®s->regs, 1); +#ifdef CONFIG_SYSCALL_DEBUG + record_syscall_end(index, result); +#endif +} diff --git a/arch/um/kernel/tt/syscall_user.c b/arch/um/kernel/tt/syscall_user.c index b218316cfdb2..902987bf379b 100644 --- a/arch/um/kernel/tt/syscall_user.c +++ b/arch/um/kernel/tt/syscall_user.c @@ -13,42 +13,9 @@ #include "task.h" #include "user_util.h" #include "kern_util.h" -#include "syscall_user.h" +#include "syscall.h" #include "tt.h" - -void syscall_handler_tt(int sig, union uml_pt_regs *regs) -{ - void *sc; - long result; - int syscall; -#ifdef UML_CONFIG_DEBUG_SYSCALL - int index; -#endif - - syscall = UPT_SYSCALL_NR(regs); - sc = UPT_SC(regs); - SC_START_SYSCALL(sc); - -#ifdef UML_CONFIG_DEBUG_SYSCALL - index = record_syscall_start(syscall); -#endif - syscall_trace(regs, 0); - result = execute_syscall_tt(regs); - - /* regs->sc may have changed while the system call ran (there may - * have been an interrupt or segfault), so it needs to be refreshed. - */ - UPT_SC(regs) = sc; - - SC_SET_SYSCALL_RETURN(sc, result); - - syscall_trace(regs, 1); -#ifdef UML_CONFIG_DEBUG_SYSCALL - record_syscall_end(index, result); -#endif -} - void do_sigtrap(void *task) { UPT_SYSCALL_NR(TASK_REGS(task)) = -1; diff --git a/arch/um/kernel/tt/tlb.c b/arch/um/kernel/tt/tlb.c index 2eefb43bc9c2..f1d85dbb45b9 100644 --- a/arch/um/kernel/tt/tlb.c +++ b/arch/um/kernel/tt/tlb.c @@ -17,25 +17,31 @@ #include "os.h" #include "tlb.h" -static void do_ops(union mm_context *mmu, struct host_vm_op *ops, int last) +static int do_ops(union mm_context *mmu, struct host_vm_op *ops, int last, + int finished, void **flush) { struct host_vm_op *op; - int i; + int i, ret=0; - for(i = 0; i <= last; i++){ + for(i = 0; i <= last && !ret; i++){ op = &ops[i]; switch(op->type){ case MMAP: - os_map_memory((void *) op->u.mmap.addr, op->u.mmap.fd, - op->u.mmap.offset, op->u.mmap.len, - op->u.mmap.r, op->u.mmap.w, - op->u.mmap.x); + ret = os_map_memory((void *) op->u.mmap.addr, + op->u.mmap.fd, op->u.mmap.offset, + op->u.mmap.len, op->u.mmap.r, + op->u.mmap.w, op->u.mmap.x); break; case MUNMAP: - os_unmap_memory((void *) op->u.munmap.addr, - op->u.munmap.len); + ret = os_unmap_memory((void *) op->u.munmap.addr, + op->u.munmap.len); break; case MPROTECT: + ret = protect_memory(op->u.mprotect.addr, + op->u.munmap.len, + op->u.mprotect.r, + op->u.mprotect.w, + op->u.mprotect.x, 1); protect_memory(op->u.mprotect.addr, op->u.munmap.len, op->u.mprotect.r, op->u.mprotect.w, op->u.mprotect.x, 1); @@ -45,6 +51,8 @@ static void do_ops(union mm_context *mmu, struct host_vm_op *ops, int last) break; } } + + return ret; } static void fix_range(struct mm_struct *mm, unsigned long start_addr, diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index ca2bb6f09a7d..09f6f7ce4695 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -126,7 +126,7 @@ unsigned long start_vm; unsigned long end_vm; int ncpus = 1; -#ifdef CONFIG_MODE_TT +#ifdef CONFIG_CMDLINE_ON_HOST /* Pointer set in linux_main, the array itself is private to each thread, * and changed at address space creation time so this poses no concurrency * problems. @@ -141,7 +141,7 @@ long physmem_size = 32 * 1024 * 1024; void set_cmdline(char *cmd) { -#ifdef CONFIG_MODE_TT +#ifdef CONFIG_CMDLINE_ON_HOST char *umid, *ptr; if(CHOOSE_MODE(honeypot, 0)) return; @@ -333,6 +333,7 @@ int linux_main(int argc, char **argv) if(have_root == 0) add_arg(DEFAULT_COMMAND_LINE); + os_early_checks(); mode_tt = force_tt ? 1 : !can_do_skas(); #ifndef CONFIG_MODE_TT if (mode_tt) { @@ -385,7 +386,7 @@ int linux_main(int argc, char **argv) setup_machinename(system_utsname.machine); -#ifdef CONFIG_MODE_TT +#ifdef CONFIG_CMDLINE_ON_HOST argv1_begin = argv[1]; argv1_end = &argv[1][strlen(argv[1])]; #endif @@ -470,7 +471,6 @@ void __init setup_arch(char **cmdline_p) void __init check_bugs(void) { arch_check_bugs(); - check_ptrace(); check_sigio(); check_devanon(); } diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S index b03326d391c9..af11915ce0a8 100644 --- a/arch/um/kernel/uml.lds.S +++ b/arch/um/kernel/uml.lds.S @@ -93,14 +93,10 @@ SECTIONS *(.bss) *(COMMON) } - _end = . ; + _end = .; PROVIDE (end = .); - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } + + STABS_DEBUG + + DWARF_DEBUG } diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile index 4ddf540284ce..7a1662419c0c 100644 --- a/arch/um/os-Linux/Makefile +++ b/arch/um/os-Linux/Makefile @@ -3,11 +3,19 @@ # Licensed under the GPL # -obj-y = elf_aux.o file.o process.o signal.o time.o tty.o user_syms.o drivers/ \ - sys-$(SUBARCH)/ +obj-y = aio.o elf_aux.o file.o process.o signal.o start_up.o time.o tt.o \ + tty.o user_syms.o drivers/ sys-$(SUBARCH)/ -USER_OBJS := elf_aux.o file.o process.o signal.o time.o tty.o +USER_OBJS := aio.o elf_aux.o file.o process.o signal.o start_up.o time.o tt.o \ + tty.o + +elf_aux.o: $(ARCH_DIR)/kernel-offsets.h +CFLAGS_elf_aux.o += -I$(objtree)/arch/um CFLAGS_user_syms.o += -DSUBARCH_$(SUBARCH) +HAVE_AIO_ABI := $(shell [ -r /usr/include/linux/aio_abi.h ] && \ + echo -DHAVE_AIO_ABI ) +CFLAGS_aio.o += $(HAVE_AIO_ABI) + include arch/um/scripts/Makefile.rules diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c new file mode 100644 index 000000000000..b04897cd995d --- /dev/null +++ b/arch/um/os-Linux/aio.c @@ -0,0 +1,414 @@ +/* + * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com) + * Licensed under the GPL + */ + +#include <stdlib.h> +#include <unistd.h> +#include <signal.h> +#include <string.h> +#include <errno.h> +#include <sched.h> +#include <sys/syscall.h> +#include "os.h" +#include "helper.h" +#include "aio.h" +#include "init.h" +#include "user.h" +#include "mode.h" + +static int aio_req_fd_r = -1; +static int aio_req_fd_w = -1; + +static int update_aio(struct aio_context *aio, int res) +{ + if(res < 0) + aio->len = res; + else if((res == 0) && (aio->type == AIO_READ)){ + /* This is the EOF case - we have hit the end of the file + * and it ends in a partial block, so we fill the end of + * the block with zeros and claim success. + */ + memset(aio->data, 0, aio->len); + aio->len = 0; + } + else if(res > 0){ + aio->len -= res; + aio->data += res; + aio->offset += res; + return aio->len; + } + + return 0; +} + +#if defined(HAVE_AIO_ABI) +#include <linux/aio_abi.h> + +/* If we have the headers, we are going to build with AIO enabled. + * If we don't have aio in libc, we define the necessary stubs here. + */ + +#if !defined(HAVE_AIO_LIBC) + +static long io_setup(int n, aio_context_t *ctxp) +{ + return syscall(__NR_io_setup, n, ctxp); +} + +static long io_submit(aio_context_t ctx, long nr, struct iocb **iocbpp) +{ + return syscall(__NR_io_submit, ctx, nr, iocbpp); +} + +static long io_getevents(aio_context_t ctx_id, long min_nr, long nr, + struct io_event *events, struct timespec *timeout) +{ + return syscall(__NR_io_getevents, ctx_id, min_nr, nr, events, timeout); +} + +#endif + +/* The AIO_MMAP cases force the mmapped page into memory here + * rather than in whatever place first touches the data. I used + * to do this by touching the page, but that's delicate because + * gcc is prone to optimizing that away. So, what's done here + * is we read from the descriptor from which the page was + * mapped. The caller is required to pass an offset which is + * inside the page that was mapped. Thus, when the read + * returns, we know that the page is in the page cache, and + * that it now backs the mmapped area. + */ + +static int do_aio(aio_context_t ctx, struct aio_context *aio) +{ + struct iocb iocb, *iocbp = &iocb; + char c; + int err; + + iocb = ((struct iocb) { .aio_data = (unsigned long) aio, + .aio_reqprio = 0, + .aio_fildes = aio->fd, + .aio_buf = (unsigned long) aio->data, + .aio_nbytes = aio->len, + .aio_offset = aio->offset, + .aio_reserved1 = 0, + .aio_reserved2 = 0, + .aio_reserved3 = 0 }); + + switch(aio->type){ + case AIO_READ: + iocb.aio_lio_opcode = IOCB_CMD_PREAD; + break; + case AIO_WRITE: + iocb.aio_lio_opcode = IOCB_CMD_PWRITE; + break; + case AIO_MMAP: + iocb.aio_lio_opcode = IOCB_CMD_PREAD; + iocb.aio_buf = (unsigned long) &c; + iocb.aio_nbytes = sizeof(c); + break; + default: + printk("Bogus op in do_aio - %d\n", aio->type); + err = -EINVAL; + goto out; + } + + err = io_submit(ctx, 1, &iocbp); + if(err > 0) + err = 0; + + out: + return err; +} + +static aio_context_t ctx = 0; + +static int aio_thread(void *arg) +{ + struct aio_thread_reply reply; + struct aio_context *aio; + struct io_event event; + int err, n; + + signal(SIGWINCH, SIG_IGN); + + while(1){ + n = io_getevents(ctx, 1, 1, &event, NULL); + if(n < 0){ + if(errno == EINTR) + continue; + printk("aio_thread - io_getevents failed, " + "errno = %d\n", errno); + } + else { + aio = (struct aio_context *) event.data; + if(update_aio(aio, event.res)){ + do_aio(ctx, aio); + continue; + } + + reply = ((struct aio_thread_reply) + { .data = aio, + .err = aio->len }); + err = os_write_file(aio->reply_fd, &reply, + sizeof(reply)); + if(err != sizeof(reply)) + printk("aio_thread - write failed, " + "fd = %d, err = %d\n", aio->reply_fd, + -err); + } + } + return 0; +} + +#endif + +static int do_not_aio(struct aio_context *aio) +{ + char c; + int err; + + switch(aio->type){ + case AIO_READ: + err = os_seek_file(aio->fd, aio->offset); + if(err) + goto out; + + err = os_read_file(aio->fd, aio->data, aio->len); + break; + case AIO_WRITE: + err = os_seek_file(aio->fd, aio->offset); + if(err) + goto out; + + err = os_write_file(aio->fd, aio->data, aio->len); + break; + case AIO_MMAP: + err = os_seek_file(aio->fd, aio->offset); + if(err) + goto out; + + err = os_read_file(aio->fd, &c, sizeof(c)); + break; + default: + printk("do_not_aio - bad request type : %d\n", aio->type); + err = -EINVAL; + break; + } + + out: + return err; +} + +static int not_aio_thread(void *arg) +{ + struct aio_context *aio; + struct aio_thread_reply reply; + int err; + + signal(SIGWINCH, SIG_IGN); + while(1){ + err = os_read_file(aio_req_fd_r, &aio, sizeof(aio)); + if(err != sizeof(aio)){ + if(err < 0) + printk("not_aio_thread - read failed, " + "fd = %d, err = %d\n", aio_req_fd_r, + -err); + else { + printk("not_aio_thread - short read, fd = %d, " + "length = %d\n", aio_req_fd_r, err); + } + continue; + } + again: + err = do_not_aio(aio); + + if(update_aio(aio, err)) + goto again; + + reply = ((struct aio_thread_reply) { .data = aio, + .err = aio->len }); + err = os_write_file(aio->reply_fd, &reply, sizeof(reply)); + if(err != sizeof(reply)) + printk("not_aio_thread - write failed, fd = %d, " + "err = %d\n", aio_req_fd_r, -err); + } +} + +static int submit_aio_24(struct aio_context *aio) +{ + int err; + + err = os_write_file(aio_req_fd_w, &aio, sizeof(aio)); + if(err == sizeof(aio)) + err = 0; + + return err; +} + +static int aio_pid = -1; +static int (*submit_proc)(struct aio_context *aio); + +static int init_aio_24(void) +{ + unsigned long stack; + int fds[2], err; + + err = os_pipe(fds, 1, 1); + if(err) + goto out; + + aio_req_fd_w = fds[0]; + aio_req_fd_r = fds[1]; + err = run_helper_thread(not_aio_thread, NULL, + CLONE_FILES | CLONE_VM | SIGCHLD, &stack, 0); + if(err < 0) + goto out_close_pipe; + + aio_pid = err; + goto out; + + out_close_pipe: + os_close_file(fds[0]); + os_close_file(fds[1]); + aio_req_fd_w = -1; + aio_req_fd_r = -1; + out: +#ifndef HAVE_AIO_ABI + printk("/usr/include/linux/aio_abi.h not present during build\n"); +#endif + printk("2.6 host AIO support not used - falling back to I/O " + "thread\n"); + + submit_proc = submit_aio_24; + + return 0; +} + +#ifdef HAVE_AIO_ABI +#define DEFAULT_24_AIO 0 +static int submit_aio_26(struct aio_context *aio) +{ + struct aio_thread_reply reply; + int err; + + err = do_aio(ctx, aio); + if(err){ + reply = ((struct aio_thread_reply) { .data = aio, + .err = err }); + err = os_write_file(aio->reply_fd, &reply, sizeof(reply)); + if(err != sizeof(reply)) + printk("submit_aio_26 - write failed, " + "fd = %d, err = %d\n", aio->reply_fd, -err); + else err = 0; + } + + return err; +} + +static int init_aio_26(void) +{ + unsigned long stack; + int err; + + if(io_setup(256, &ctx)){ + printk("aio_thread failed to initialize context, err = %d\n", + errno); + return -errno; + } + + err = run_helper_thread(aio_thread, NULL, + CLONE_FILES | CLONE_VM | SIGCHLD, &stack, 0); + if(err < 0) + return -errno; + + aio_pid = err; + + printk("Using 2.6 host AIO\n"); + + submit_proc = submit_aio_26; + + return 0; +} + +#else +#define DEFAULT_24_AIO 1 +static int submit_aio_26(struct aio_context *aio) +{ + return -ENOSYS; +} + +static int init_aio_26(void) +{ + submit_proc = submit_aio_26; + return -ENOSYS; +} +#endif + +static int aio_24 = DEFAULT_24_AIO; + +static int __init set_aio_24(char *name, int *add) +{ + aio_24 = 1; + return 0; +} + +__uml_setup("aio=2.4", set_aio_24, +"aio=2.4\n" +" This is used to force UML to use 2.4-style AIO even when 2.6 AIO is\n" +" available. 2.4 AIO is a single thread that handles one request at a\n" +" time, synchronously. 2.6 AIO is a thread which uses the 2.6 AIO \n" +" interface to handle an arbitrary number of pending requests. 2.6 AIO \n" +" is not available in tt mode, on 2.4 hosts, or when UML is built with\n" +" /usr/include/linux/aio_abi.h not available. Many distributions don't\n" +" include aio_abi.h, so you will need to copy it from a kernel tree to\n" +" your /usr/include/linux in order to build an AIO-capable UML\n\n" +); + +static int init_aio(void) +{ + int err; + + CHOOSE_MODE(({ + if(!aio_24){ + printk("Disabling 2.6 AIO in tt mode\n"); + aio_24 = 1; + } }), (void) 0); + + if(!aio_24){ + err = init_aio_26(); + if(err && (errno == ENOSYS)){ + printk("2.6 AIO not supported on the host - " + "reverting to 2.4 AIO\n"); + aio_24 = 1; + } + else return err; + } + + if(aio_24) + return init_aio_24(); + + return 0; +} + +/* The reason for the __initcall/__uml_exitcall asymmetry is that init_aio + * needs to be called when the kernel is running because it calls run_helper, + * which needs get_free_page. exit_aio is a __uml_exitcall because the generic + * kernel does not run __exitcalls on shutdown, and can't because many of them + * break when called outside of module unloading. + */ +__initcall(init_aio); + +static void exit_aio(void) +{ + if(aio_pid != -1) + os_kill_process(aio_pid, 1); +} + +__uml_exitcall(exit_aio); + +int submit_aio(struct aio_context *aio) +{ + return (*submit_proc)(aio); +} diff --git a/arch/um/os-Linux/elf_aux.c b/arch/um/os-Linux/elf_aux.c index 4cca3e9c23fe..1399520a8588 100644 --- a/arch/um/os-Linux/elf_aux.c +++ b/arch/um/os-Linux/elf_aux.c @@ -12,8 +12,9 @@ #include "init.h" #include "elf_user.h" #include "mem_user.h" +#include <kernel-offsets.h> -#if ELF_CLASS == ELFCLASS32 +#if HOST_ELF_CLASS == ELFCLASS32 typedef Elf32_auxv_t elf_auxv_t; #else typedef Elf64_auxv_t elf_auxv_t; diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c index 1e126bfd31a7..d32413e4b4ce 100644 --- a/arch/um/os-Linux/process.c +++ b/arch/um/os-Linux/process.c @@ -3,10 +3,10 @@ * Licensed under the GPL */ -#include <unistd.h> #include <stdio.h> #include <errno.h> #include <signal.h> +#include <setjmp.h> #include <linux/unistd.h> #include <sys/mman.h> #include <sys/wait.h> @@ -14,6 +14,10 @@ #include "os.h" #include "user.h" #include "user_util.h" +#include "signal_user.h" +#include "process.h" +#include "irq_user.h" +#include "kern_util.h" #define ARBITRARY_ADDR -1 #define FAILURE_PID -1 @@ -114,8 +118,10 @@ void os_usr1_process(int pid) kill(pid, SIGUSR1); } -/*Don't use the glibc version, which caches the result in TLS. It misses some - * syscalls, and also breaks with clone(), which does not unshare the TLS.*/ +/* Don't use the glibc version, which caches the result in TLS. It misses some + * syscalls, and also breaks with clone(), which does not unshare the TLS. + */ + inline _syscall0(pid_t, getpid) int os_getpid(void) @@ -164,6 +170,52 @@ int os_unmap_memory(void *addr, int len) return(0); } +void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int)) +{ + int flags = 0, pages; + + if(sig_stack != NULL){ + pages = (1 << UML_CONFIG_KERNEL_STACK_ORDER); + set_sigstack(sig_stack, pages * page_size()); + flags = SA_ONSTACK; + } + if(usr1_handler) set_handler(SIGUSR1, usr1_handler, flags, -1); +} + +void init_new_thread_signals(int altstack) +{ + int flags = altstack ? SA_ONSTACK : 0; + + set_handler(SIGSEGV, (__sighandler_t) sig_handler, flags, + SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1); + set_handler(SIGTRAP, (__sighandler_t) sig_handler, flags, + SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1); + set_handler(SIGFPE, (__sighandler_t) sig_handler, flags, + SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1); + set_handler(SIGILL, (__sighandler_t) sig_handler, flags, + SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1); + set_handler(SIGBUS, (__sighandler_t) sig_handler, flags, + SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1); + set_handler(SIGUSR2, (__sighandler_t) sig_handler, + flags, SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1); + signal(SIGHUP, SIG_IGN); + + init_irq_signals(altstack); +} + +int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr) +{ + sigjmp_buf buf; + int n; + + *jmp_ptr = &buf; + n = sigsetjmp(buf, 1); + if(n != 0) + return(n); + (*fn)(arg); + return(0); +} + /* * Overrides for Emacs so that we follow Linus's tabbing style. * Emacs will notice this stuff at the end of the file and automatically diff --git a/arch/um/kernel/process.c b/arch/um/os-Linux/start_up.c index 67acd92c5322..040cc1472bc7 100644 --- a/arch/um/kernel/process.c +++ b/arch/um/os-Linux/start_up.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -19,7 +19,6 @@ #include "user_util.h" #include "kern_util.h" #include "user.h" -#include "process.h" #include "signal_kern.h" #include "signal_user.h" #include "sysdep/ptrace.h" @@ -39,98 +38,6 @@ #include "registers.h" #endif -void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int)) -{ - int flags = 0, pages; - - if(sig_stack != NULL){ - pages = (1 << UML_CONFIG_KERNEL_STACK_ORDER); - set_sigstack(sig_stack, pages * page_size()); - flags = SA_ONSTACK; - } - if(usr1_handler) set_handler(SIGUSR1, usr1_handler, flags, -1); -} - -void init_new_thread_signals(int altstack) -{ - int flags = altstack ? SA_ONSTACK : 0; - - set_handler(SIGSEGV, (__sighandler_t) sig_handler, flags, - SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1); - set_handler(SIGTRAP, (__sighandler_t) sig_handler, flags, - SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1); - set_handler(SIGFPE, (__sighandler_t) sig_handler, flags, - SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1); - set_handler(SIGILL, (__sighandler_t) sig_handler, flags, - SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1); - set_handler(SIGBUS, (__sighandler_t) sig_handler, flags, - SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1); - set_handler(SIGUSR2, (__sighandler_t) sig_handler, - flags, SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1); - signal(SIGHUP, SIG_IGN); - - init_irq_signals(altstack); -} - -struct tramp { - int (*tramp)(void *); - void *tramp_data; - unsigned long temp_stack; - int flags; - int pid; -}; - -/* See above for why sigkill is here */ - -int sigkill = SIGKILL; - -int outer_tramp(void *arg) -{ - struct tramp *t; - int sig = sigkill; - - t = arg; - t->pid = clone(t->tramp, (void *) t->temp_stack + page_size()/2, - t->flags, t->tramp_data); - if(t->pid > 0) wait_for_stop(t->pid, SIGSTOP, PTRACE_CONT, NULL); - kill(os_getpid(), sig); - _exit(0); -} - -int start_fork_tramp(void *thread_arg, unsigned long temp_stack, - int clone_flags, int (*tramp)(void *)) -{ - struct tramp arg; - unsigned long sp; - int new_pid, status, err; - - /* The trampoline will run on the temporary stack */ - sp = stack_sp(temp_stack); - - clone_flags |= CLONE_FILES | SIGCHLD; - - arg.tramp = tramp; - arg.tramp_data = thread_arg; - arg.temp_stack = temp_stack; - arg.flags = clone_flags; - - /* Start the process and wait for it to kill itself */ - new_pid = clone(outer_tramp, (void *) sp, clone_flags, &arg); - if(new_pid < 0) - return(new_pid); - - CATCH_EINTR(err = waitpid(new_pid, &status, 0)); - if(err < 0) - panic("Waiting for outer trampoline failed - errno = %d", - errno); - - if(!WIFSIGNALED(status) || (WTERMSIG(status) != SIGKILL)) - panic("outer trampoline didn't exit with SIGKILL, " - "status = %d", status); - - return(arg.pid); -} - static int ptrace_child(void *arg) { int ret; @@ -165,7 +72,7 @@ static int start_ptraced_child(void **stack_out) void *stack; unsigned long sp; int pid, n, status; - + stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if(stack == MAP_FAILED) @@ -173,10 +80,10 @@ static int start_ptraced_child(void **stack_out) sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *); pid = clone(ptrace_child, (void *) sp, SIGCHLD, NULL); if(pid < 0) - panic("check_ptrace : clone failed, errno = %d", errno); + panic("start_ptraced_child : clone failed, errno = %d", errno); CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED)); if(n < 0) - panic("check_ptrace : wait failed, errno = %d", errno); + panic("check_ptrace : clone failed, errno = %d", errno); if(!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP)) panic("check_ptrace : expected SIGSTOP, got status = %d", status); @@ -185,11 +92,14 @@ static int start_ptraced_child(void **stack_out) return(pid); } -/* When testing for SYSEMU support, if it is one of the broken versions, we must - * just avoid using sysemu, not panic, but only if SYSEMU features are broken. +/* When testing for SYSEMU support, if it is one of the broken versions, we + * must just avoid using sysemu, not panic, but only if SYSEMU features are + * broken. * So only for SYSEMU features we test mustpanic, while normal host features - * must work anyway!*/ -static int stop_ptraced_child(int pid, void *stack, int exitcode, int mustpanic) + * must work anyway! + */ +static int stop_ptraced_child(int pid, void *stack, int exitcode, + int mustpanic) { int status, n, ret = 0; @@ -217,8 +127,6 @@ static int stop_ptraced_child(int pid, void *stack, int exitcode, int mustpanic) return ret; } -static int force_sysemu_disabled = 0; - int ptrace_faultinfo = 1; int proc_mm = 1; @@ -228,29 +136,32 @@ static int __init skas0_cmd_param(char *str, int* add) return 0; } +__uml_setup("skas0", skas0_cmd_param, + "skas0\n" + " Disables SKAS3 usage, so that SKAS0 is used, unless \n" + " you specify mode=tt.\n\n"); + +static int force_sysemu_disabled = 0; + static int __init nosysemu_cmd_param(char *str, int* add) { force_sysemu_disabled = 1; return 0; } -__uml_setup("skas0", skas0_cmd_param, - "skas0\n" - " Disables SKAS3 usage, so that SKAS0 is used, unless you \n" - " specify mode=tt.\n\n"); - __uml_setup("nosysemu", nosysemu_cmd_param, - "nosysemu\n" - " Turns off syscall emulation patch for ptrace (SYSEMU) on.\n" - " SYSEMU is a performance-patch introduced by Laurent Vivier. It changes\n" - " behaviour of ptrace() and helps reducing host context switch rate.\n" - " To make it working, you need a kernel patch for your host, too.\n" - " See http://perso.wanadoo.fr/laurent.vivier/UML/ for further information.\n\n"); +"nosysemu\n" +" Turns off syscall emulation patch for ptrace (SYSEMU) on.\n" +" SYSEMU is a performance-patch introduced by Laurent Vivier. It changes\n" +" behaviour of ptrace() and helps reducing host context switch rate.\n" +" To make it working, you need a kernel patch for your host, too.\n" +" See http://perso.wanadoo.fr/laurent.vivier/UML/ for further \n" +" information.\n\n"); static void __init check_sysemu(void) { void *stack; - int pid, syscall, n, status, count=0; + int pid, n, status, count=0; printk("Checking syscall emulation patch for ptrace..."); sysemu_supported = 0; @@ -281,6 +192,12 @@ static void __init check_sysemu(void) printk("Checking advanced syscall emulation patch for ptrace..."); pid = start_ptraced_child(&stack); + + if(ptrace(PTRACE_OLDSETOPTIONS, pid, 0, + (void *) PTRACE_O_TRACESYSGOOD) < 0) + panic("check_ptrace: PTRACE_OLDSETOPTIONS failed, errno = %d", + errno); + while(1){ count++; if(ptrace(PTRACE_SYSEMU_SINGLESTEP, pid, 0, 0) < 0) @@ -288,15 +205,10 @@ static void __init check_sysemu(void) CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED)); if(n < 0) panic("check_ptrace : wait failed, errno = %d", errno); - if(!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGTRAP)) - panic("check_ptrace : expected (SIGTRAP|SYSCALL_TRAP), " - "got status = %d", status); - - syscall = ptrace(PTRACE_PEEKUSR, pid, PT_SYSCALL_NR_OFFSET, - 0); - if(syscall == __NR_getpid){ + if(WIFSTOPPED(status) && (WSTOPSIG(status) == (SIGTRAP|0x80))){ if (!count) - panic("check_ptrace : SYSEMU_SINGLESTEP doesn't singlestep"); + panic("check_ptrace : SYSEMU_SINGLESTEP " + "doesn't singlestep"); n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET, os_getpid()); if(n < 0) @@ -304,6 +216,11 @@ static void __init check_sysemu(void) "call return, errno = %d", errno); break; } + else if(WIFSTOPPED(status) && (WSTOPSIG(status) == SIGTRAP)) + count++; + else + panic("check_ptrace : expected SIGTRAP or " + "(SIGTRAP|0x80), got status = %d", status); } if (stop_ptraced_child(pid, stack, 0, 0) < 0) goto fail_stopped; @@ -321,7 +238,7 @@ fail_stopped: printk("missing\n"); } -void __init check_ptrace(void) +static void __init check_ptrace(void) { void *stack; int pid, syscall, n, status; @@ -329,20 +246,20 @@ void __init check_ptrace(void) printk("Checking that ptrace can change system call numbers..."); pid = start_ptraced_child(&stack); - if (ptrace(PTRACE_OLDSETOPTIONS, pid, 0, (void *)PTRACE_O_TRACESYSGOOD) < 0) - panic("check_ptrace: PTRACE_SETOPTIONS failed, errno = %d", errno); + if(ptrace(PTRACE_OLDSETOPTIONS, pid, 0, (void *)PTRACE_O_TRACESYSGOOD) < 0) + panic("check_ptrace: PTRACE_OLDSETOPTIONS failed, errno = %d", errno); while(1){ if(ptrace(PTRACE_SYSCALL, pid, 0, 0) < 0) - panic("check_ptrace : ptrace failed, errno = %d", + panic("check_ptrace : ptrace failed, errno = %d", errno); CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED)); if(n < 0) panic("check_ptrace : wait failed, errno = %d", errno); - if(!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGTRAP + 0x80)) - panic("check_ptrace : expected SIGTRAP + 0x80, " + if(!WIFSTOPPED(status) || (WSTOPSIG(status) != (SIGTRAP|0x80))) + panic("check_ptrace : expected (SIGTRAP|0x80), " "got status = %d", status); - + syscall = ptrace(PTRACE_PEEKUSR, pid, PT_SYSCALL_NR_OFFSET, 0); if(syscall == __NR_getpid){ @@ -359,33 +276,36 @@ void __init check_ptrace(void) check_sysemu(); } -int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr) +void os_early_checks(void) { - sigjmp_buf buf; - int n; - - *jmp_ptr = &buf; - n = sigsetjmp(buf, 1); - if(n != 0) - return(n); - (*fn)(arg); - return(0); + check_ptrace(); } -void forward_pending_sigio(int target) +static int __init noprocmm_cmd_param(char *str, int* add) { - sigset_t sigs; + proc_mm = 0; + return 0; +} + +__uml_setup("noprocmm", noprocmm_cmd_param, +"noprocmm\n" +" Turns off usage of /proc/mm, even if host supports it.\n" +" To support /proc/mm, the host needs to be patched using\n" +" the current skas3 patch.\n\n"); - if(sigpending(&sigs)) - panic("forward_pending_sigio : sigpending failed"); - if(sigismember(&sigs, SIGIO)) - kill(target, SIGIO); +static int __init noptracefaultinfo_cmd_param(char *str, int* add) +{ + ptrace_faultinfo = 0; + return 0; } -extern void *__syscall_stub_start, __syscall_stub_end; +__uml_setup("noptracefaultinfo", noptracefaultinfo_cmd_param, +"noptracefaultinfo\n" +" Turns off usage of PTRACE_FAULTINFO, even if host supports\n" +" it. To support PTRACE_FAULTINFO, the host needs to be patched\n" +" using the current skas3 patch.\n\n"); #ifdef UML_CONFIG_MODE_SKAS - static inline void check_skas3_ptrace_support(void) { struct ptrace_faultinfo fi; @@ -400,9 +320,8 @@ static inline void check_skas3_ptrace_support(void) ptrace_faultinfo = 0; if(errno == EIO) printf("not found\n"); - else { + else perror("not found"); - } } else { if (!ptrace_faultinfo) @@ -419,9 +338,10 @@ int can_do_skas(void) { printf("Checking for /proc/mm..."); if (os_access("/proc/mm", OS_ACC_W_OK) < 0) { - proc_mm = 0; + proc_mm = 0; printf("not found\n"); - } else { + } + else { if (!proc_mm) printf("found but disabled on command line\n"); else diff --git a/arch/um/os-Linux/tt.c b/arch/um/os-Linux/tt.c new file mode 100644 index 000000000000..5b047ab8416a --- /dev/null +++ b/arch/um/os-Linux/tt.c @@ -0,0 +1,113 @@ +/* + * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include <stdio.h> +#include <unistd.h> +#include <signal.h> +#include <sched.h> +#include <errno.h> +#include <stdarg.h> +#include <stdlib.h> +#include <setjmp.h> +#include <sys/time.h> +#include <sys/ptrace.h> +#include <linux/ptrace.h> +#include <sys/wait.h> +#include <sys/mman.h> +#include <asm/ptrace.h> +#include <asm/unistd.h> +#include <asm/page.h> +#include "user_util.h" +#include "kern_util.h" +#include "user.h" +#include "signal_kern.h" +#include "signal_user.h" +#include "sysdep/ptrace.h" +#include "sysdep/sigcontext.h" +#include "irq_user.h" +#include "ptrace_user.h" +#include "time_user.h" +#include "init.h" +#include "os.h" +#include "uml-config.h" +#include "choose-mode.h" +#include "mode.h" +#include "tempfile.h" + +/* + *------------------------- + * only for tt mode (will be deleted in future...) + *------------------------- + */ + +struct tramp { + int (*tramp)(void *); + void *tramp_data; + unsigned long temp_stack; + int flags; + int pid; +}; + +/* See above for why sigkill is here */ + +int sigkill = SIGKILL; + +int outer_tramp(void *arg) +{ + struct tramp *t; + int sig = sigkill; + + t = arg; + t->pid = clone(t->tramp, (void *) t->temp_stack + page_size()/2, + t->flags, t->tramp_data); + if(t->pid > 0) wait_for_stop(t->pid, SIGSTOP, PTRACE_CONT, NULL); + kill(os_getpid(), sig); + _exit(0); +} + +int start_fork_tramp(void *thread_arg, unsigned long temp_stack, + int clone_flags, int (*tramp)(void *)) +{ + struct tramp arg; + unsigned long sp; + int new_pid, status, err; + + /* The trampoline will run on the temporary stack */ + sp = stack_sp(temp_stack); + + clone_flags |= CLONE_FILES | SIGCHLD; + + arg.tramp = tramp; + arg.tramp_data = thread_arg; + arg.temp_stack = temp_stack; + arg.flags = clone_flags; + + /* Start the process and wait for it to kill itself */ + new_pid = clone(outer_tramp, (void *) sp, clone_flags, &arg); + if(new_pid < 0) + return(new_pid); + + CATCH_EINTR(err = waitpid(new_pid, &status, 0)); + if(err < 0) + panic("Waiting for outer trampoline failed - errno = %d", + errno); + + if(!WIFSIGNALED(status) || (WTERMSIG(status) != SIGKILL)) + panic("outer trampoline didn't exit with SIGKILL, " + "status = %d", status); + + return(arg.pid); +} + +void forward_pending_sigio(int target) +{ + sigset_t sigs; + + if(sigpending(&sigs)) + panic("forward_pending_sigio : sigpending failed"); + if(sigismember(&sigs, SIGIO)) + kill(target, SIGIO); +} + diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules index 17f305b6bade..59a1291f477e 100644 --- a/arch/um/scripts/Makefile.rules +++ b/arch/um/scripts/Makefile.rules @@ -9,6 +9,11 @@ USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file)) $(USER_OBJS) : c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) \ $(CFLAGS_$(notdir $@)) +$(USER_OBJS): cmd_checksrc = +$(USER_OBJS): quiet_cmd_checksrc = +$(USER_OBJS): cmd_force_checksrc = +$(USER_OBJS): quiet_cmd_force_checksrc = + # The stubs and unmap.o can't try to call mcount or update basic block data define unprofile diff --git a/arch/um/scripts/Makefile.unmap b/arch/um/scripts/Makefile.unmap index 802d027a1e13..b2165188d942 100644 --- a/arch/um/scripts/Makefile.unmap +++ b/arch/um/scripts/Makefile.unmap @@ -12,7 +12,7 @@ $(obj)/unmap.o: _c_flags = $(call unprofile,$(CFLAGS)) quiet_cmd_wrapld = LD $@ define cmd_wrapld - $(LD) $(LDFLAGS) -r -o $(obj)/unmap_tmp.o $< $(shell $(CC) $(CFLAGS) -print-file-name=libc.a); \ + $(LD) $(LDFLAGS) -r -o $(obj)/unmap_tmp.o $< ; \ $(OBJCOPY) $(UML_OBJCOPYFLAGS) $(obj)/unmap_tmp.o $@ -G switcheroo endef diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile index 77c3c4d29f55..4ca2a229da49 100644 --- a/arch/um/sys-i386/Makefile +++ b/arch/um/sys-i386/Makefile @@ -16,13 +16,7 @@ semaphore.c-dir = kernel highmem.c-dir = mm module.c-dir = kernel -STUB_CFLAGS = -Wp,-MD,$(depfile) $(call unprofile,$(USER_CFLAGS)) - -# _cflags works with kernel files, not with userspace ones, but c_flags does, -# why ask why? -$(obj)/stub_segv.o : c_flags = $(STUB_CFLAGS) - -$(obj)/stub.o : a_flags = $(STUB_CFLAGS) +$(obj)/stub_segv.o : _c_flags = $(call unprofile,$(CFLAGS)) subdir- := util diff --git a/arch/um/sys-i386/kernel-offsets.c b/arch/um/sys-i386/kernel-offsets.c index 9f8ecd1fdd96..a1070af2bcd8 100644 --- a/arch/um/sys-i386/kernel-offsets.c +++ b/arch/um/sys-i386/kernel-offsets.c @@ -2,6 +2,7 @@ #include <linux/stddef.h> #include <linux/sched.h> #include <linux/time.h> +#include <linux/elf.h> #include <asm/page.h> #define DEFINE(sym, val) \ diff --git a/arch/um/sys-i386/signal.c b/arch/um/sys-i386/signal.c index 4efc69a039d7..16bc19928b3c 100644 --- a/arch/um/sys-i386/signal.c +++ b/arch/um/sys-i386/signal.c @@ -122,9 +122,9 @@ int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from, int err; to_fp = to->fpstate; - from_fp = from->fpstate; sigs = to->oldmask; err = copy_from_user(to, from, sizeof(*to)); + from_fp = to->fpstate; to->oldmask = sigs; to->fpstate = to_fp; if(to_fp != NULL) diff --git a/arch/um/sys-i386/stub.S b/arch/um/sys-i386/stub.S index 2f2c70a8f043..6a70d9ab5c29 100644 --- a/arch/um/sys-i386/stub.S +++ b/arch/um/sys-i386/stub.S @@ -2,7 +2,50 @@ .globl syscall_stub .section .__syscall_stub, "x" -syscall_stub: - int $0x80 + + .globl batch_syscall_stub +batch_syscall_stub: + /* load pointer to first operation */ + mov $(UML_CONFIG_STUB_DATA+8), %esp + +again: + /* load length of additional data */ + mov 0x0(%esp), %eax + + /* if(length == 0) : end of list */ + /* write possible 0 to header */ + mov %eax, UML_CONFIG_STUB_DATA+4 + cmpl $0, %eax + jz done + + /* save current pointer */ + mov %esp, UML_CONFIG_STUB_DATA+4 + + /* skip additional data */ + add %eax, %esp + + /* load syscall-# */ + pop %eax + + /* load syscall params */ + pop %ebx + pop %ecx + pop %edx + pop %esi + pop %edi + pop %ebp + + /* execute syscall */ + int $0x80 + + /* check return value */ + pop %ebx + cmp %ebx, %eax + je again + +done: + /* save return value */ mov %eax, UML_CONFIG_STUB_DATA + + /* stop */ int3 diff --git a/arch/um/sys-i386/stub_segv.c b/arch/um/sys-i386/stub_segv.c index 68aeabe3a654..1e88b275edac 100644 --- a/arch/um/sys-i386/stub_segv.c +++ b/arch/um/sys-i386/stub_segv.c @@ -3,8 +3,7 @@ * Licensed under the GPL */ -#include <signal.h> -#include <asm/sigcontext.h> +#include <asm/signal.h> #include <asm/unistd.h> #include "uml-config.h" #include "sysdep/sigcontext.h" diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile index 7488206ce6f4..f0ab574d1e95 100644 --- a/arch/um/sys-x86_64/Makefile +++ b/arch/um/sys-x86_64/Makefile @@ -6,7 +6,7 @@ #XXX: why into lib-y? lib-y = bitops.o bugs.o csum-partial.o delay.o fault.o mem.o memcpy.o \ - ptrace.o ptrace_user.o semaphore.o sigcontext.o signal.o stub.o \ + ptrace.o ptrace_user.o sigcontext.o signal.o stub.o \ stub_segv.o syscalls.o syscall_table.o sysrq.o thunk.o obj-y := ksyms.o @@ -15,7 +15,7 @@ obj-$(CONFIG_MODULES) += module.o um_module.o USER_OBJS := ptrace_user.o sigcontext.o SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c memcpy.S \ - semaphore.c thunk.S module.c + thunk.S module.c include arch/um/scripts/Makefile.rules @@ -24,17 +24,10 @@ csum-copy.S-dir = lib csum-partial.c-dir = lib csum-wrappers.c-dir = lib memcpy.S-dir = lib -semaphore.c-dir = kernel thunk.S-dir = lib module.c-dir = kernel -STUB_CFLAGS = -Wp,-MD,$(depfile) $(call unprofile,$(USER_CFLAGS)) - -# _cflags works with kernel files, not with userspace ones, but c_flags does, -# why ask why? -$(obj)/stub_segv.o : c_flags = $(STUB_CFLAGS) - -$(obj)/stub.o : a_flags = $(STUB_CFLAGS) +$(obj)/stub_segv.o: _c_flags = $(call unprofile,$(CFLAGS)) subdir- := util diff --git a/arch/um/sys-x86_64/kernel-offsets.c b/arch/um/sys-x86_64/kernel-offsets.c index 220e875cbe29..998541eade41 100644 --- a/arch/um/sys-x86_64/kernel-offsets.c +++ b/arch/um/sys-x86_64/kernel-offsets.c @@ -2,6 +2,7 @@ #include <linux/stddef.h> #include <linux/sched.h> #include <linux/time.h> +#include <linux/elf.h> #include <asm/page.h> #define DEFINE(sym, val) \ diff --git a/arch/um/sys-x86_64/signal.c b/arch/um/sys-x86_64/signal.c index 8fdaed06c10d..fe1d065332b1 100644 --- a/arch/um/sys-x86_64/signal.c +++ b/arch/um/sys-x86_64/signal.c @@ -104,28 +104,35 @@ int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp, int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from, int fpsize) { - struct _fpstate *to_fp, *from_fp; - unsigned long sigs; - int err; - - to_fp = to->fpstate; - from_fp = from->fpstate; - sigs = to->oldmask; - err = copy_from_user(to, from, sizeof(*to)); - to->oldmask = sigs; - return(err); + struct _fpstate *to_fp, *from_fp; + unsigned long sigs; + int err; + + to_fp = to->fpstate; + sigs = to->oldmask; + err = copy_from_user(to, from, sizeof(*to)); + from_fp = to->fpstate; + to->fpstate = to_fp; + to->oldmask = sigs; + if(to_fp != NULL) + err |= copy_from_user(to_fp, from_fp, fpsize); + return(err); } int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate *fp, struct sigcontext *from, int fpsize) { - struct _fpstate *to_fp, *from_fp; - int err; - - to_fp = (fp ? fp : (struct _fpstate *) (to + 1)); - from_fp = from->fpstate; - err = copy_to_user(to, from, sizeof(*to)); - return(err); + struct _fpstate *to_fp, *from_fp; + int err; + + to_fp = (fp ? fp : (struct _fpstate *) (to + 1)); + from_fp = from->fpstate; + err = copy_to_user(to, from, sizeof(*to)); + if(from_fp != NULL){ + err |= copy_to_user(&to->fpstate, &to_fp, sizeof(to->fpstate)); + err |= copy_to_user(to_fp, from_fp, fpsize); + } + return(err); } #endif diff --git a/arch/um/sys-x86_64/stub.S b/arch/um/sys-x86_64/stub.S index 31c14925716b..03c279735784 100644 --- a/arch/um/sys-x86_64/stub.S +++ b/arch/um/sys-x86_64/stub.S @@ -13,3 +13,54 @@ syscall_stub: or %rcx, %rbx movq %rax, (%rbx) int3 + + .globl batch_syscall_stub +batch_syscall_stub: + mov $(UML_CONFIG_STUB_DATA >> 32), %rbx + sal $32, %rbx + mov $(UML_CONFIG_STUB_DATA & 0xffffffff), %rax + or %rax, %rbx + /* load pointer to first operation */ + mov %rbx, %rsp + add $0x10, %rsp +again: + /* load length of additional data */ + mov 0x0(%rsp), %rax + + /* if(length == 0) : end of list */ + /* write possible 0 to header */ + mov %rax, 8(%rbx) + cmp $0, %rax + jz done + + /* save current pointer */ + mov %rsp, 8(%rbx) + + /* skip additional data */ + add %rax, %rsp + + /* load syscall-# */ + pop %rax + + /* load syscall params */ + pop %rdi + pop %rsi + pop %rdx + pop %r10 + pop %r8 + pop %r9 + + /* execute syscall */ + syscall + + /* check return value */ + pop %rcx + cmp %rcx, %rax + je again + +done: + /* save return value */ + mov %rax, (%rbx) + + /* stop */ + int3 diff --git a/arch/um/sys-x86_64/stub_segv.c b/arch/um/sys-x86_64/stub_segv.c index 161d1fe9c034..65a131b362b6 100644 --- a/arch/um/sys-x86_64/stub_segv.c +++ b/arch/um/sys-x86_64/stub_segv.c @@ -3,9 +3,10 @@ * Licensed under the GPL */ -#include <signal.h> +#include <asm/signal.h> #include <linux/compiler.h> #include <asm/unistd.h> +#include <asm/ucontext.h> #include "uml-config.h" #include "sysdep/sigcontext.h" #include "sysdep/faultinfo.h" diff --git a/arch/v850/Makefile b/arch/v850/Makefile index bf38ca0ad781..8be9aacb20a7 100644 --- a/arch/v850/Makefile +++ b/arch/v850/Makefile @@ -51,16 +51,4 @@ root_fs_image_force: $(ROOT_FS_IMAGE) $(OBJCOPY) $(OBJCOPY_FLAGS_BLOB) --rename-section .data=.root,alloc,load,readonly,data,contents $< root_fs_image.o endif - -prepare: include/asm-$(ARCH)/asm-consts.h - -# Generate constants from C code for use by asm files -arch/$(ARCH)/kernel/asm-consts.s: include/asm include/linux/version.h \ - include/config/MARKER - -include/asm-$(ARCH)/asm-consts.h: arch/$(ARCH)/kernel/asm-consts.s - $(call filechk,gen-asm-offsets) - -CLEAN_FILES += include/asm-$(ARCH)/asm-consts.h \ - arch/$(ARCH)/kernel/asm-consts.s \ - root_fs_image.o +CLEAN_FILES += root_fs_image.o diff --git a/arch/v850/configs/rte-ma1-cb_defconfig b/arch/v850/configs/rte-ma1-cb_defconfig index 1b5ca3c3a658..1a5beda36e29 100644 --- a/arch/v850/configs/rte-ma1-cb_defconfig +++ b/arch/v850/configs/rte-ma1-cb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-uc0 -# Thu Jul 21 11:08:27 2005 +# Linux kernel version: 2.6.13-uc0 +# Fri Sep 2 13:54:27 2005 # # CONFIG_MMU is not set # CONFIG_UID16 is not set @@ -44,6 +44,8 @@ CONFIG_ZERO_BSS=y # CONFIG_V850E_HIGHRES_TIMER is not set # CONFIG_RESET_GUARD is not set CONFIG_LARGE_ALLOCS=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y # # Code maturity level options @@ -111,6 +113,52 @@ CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_MISC is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_UNIX is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# # Generic Driver Options # CONFIG_STANDALONE=y @@ -158,6 +206,7 @@ CONFIG_MTD_CFI_I2=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -232,6 +281,7 @@ CONFIG_IOSCHED_NOOP=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -244,53 +294,8 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_PACKET is not set -# CONFIG_UNIX is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -372,6 +377,8 @@ CONFIG_EEPRO100=y # CONFIG_FDDI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -472,6 +479,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # # XFS support @@ -479,6 +487,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_MAGIC_ROM_PTR is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -524,9 +534,11 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set diff --git a/arch/v850/configs/rte-me2-cb_defconfig b/arch/v850/configs/rte-me2-cb_defconfig index 44becc065404..15e666478061 100644 --- a/arch/v850/configs/rte-me2-cb_defconfig +++ b/arch/v850/configs/rte-me2-cb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-uc0 -# Thu Jul 21 11:30:08 2005 +# Linux kernel version: 2.6.13-uc0 +# Fri Sep 2 13:47:50 2005 # # CONFIG_MMU is not set # CONFIG_UID16 is not set @@ -41,6 +41,8 @@ CONFIG_ZERO_BSS=y # CONFIG_V850E_HIGHRES_TIMER is not set # CONFIG_RESET_GUARD is not set CONFIG_LARGE_ALLOCS=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y # # Code maturity level options @@ -56,7 +58,6 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_SYSCTL is not set -# CONFIG_AUDIT is not set # CONFIG_HOTPLUG is not set # CONFIG_IKCONFIG is not set CONFIG_EMBEDDED=y @@ -104,6 +105,11 @@ CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_MISC is not set # +# Networking +# +# CONFIG_NET is not set + +# # Generic Driver Options # CONFIG_STANDALONE=y @@ -151,6 +157,7 @@ CONFIG_MTD_CFI_I2=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -218,6 +225,7 @@ CONFIG_IOSCHED_NOOP=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -228,9 +236,8 @@ CONFIG_IOSCHED_NOOP=y # # -# Networking support +# Network device support # -# CONFIG_NET is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -311,7 +318,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # @@ -335,6 +341,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # # XFS support @@ -342,6 +349,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_MAGIC_ROM_PTR is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set diff --git a/arch/v850/configs/sim_defconfig b/arch/v850/configs/sim_defconfig index d73f5f9d8383..f31ba7398ad0 100644 --- a/arch/v850/configs/sim_defconfig +++ b/arch/v850/configs/sim_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-uc0 -# Thu Jul 21 11:29:27 2005 +# Linux kernel version: 2.6.13-uc0 +# Fri Sep 2 13:36:43 2005 # # CONFIG_MMU is not set # CONFIG_UID16 is not set @@ -36,6 +36,8 @@ CONFIG_NO_CACHE=y CONFIG_ZERO_BSS=y # CONFIG_RESET_GUARD is not set CONFIG_LARGE_ALLOCS=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y # # Code maturity level options @@ -51,7 +53,6 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_SYSCTL is not set -# CONFIG_AUDIT is not set # CONFIG_HOTPLUG is not set # CONFIG_IKCONFIG is not set CONFIG_EMBEDDED=y @@ -99,6 +100,11 @@ CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_MISC is not set # +# Networking +# +# CONFIG_NET is not set + +# # Generic Driver Options # CONFIG_STANDALONE=y @@ -146,6 +152,7 @@ CONFIG_MTD_CFI_I2=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -213,6 +220,7 @@ CONFIG_IOSCHED_NOOP=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -223,9 +231,8 @@ CONFIG_IOSCHED_NOOP=y # # -# Networking support +# Network device support # -# CONFIG_NET is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -300,7 +307,6 @@ CONFIG_SERIO=y # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # @@ -324,6 +330,7 @@ CONFIG_SERIO=y # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # # XFS support @@ -331,6 +338,8 @@ CONFIG_SERIO=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_MAGIC_ROM_PTR is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set diff --git a/arch/v850/kernel/asm-consts.c b/arch/v850/kernel/asm-offsets.c index 24f291369070..24f291369070 100644 --- a/arch/v850/kernel/asm-consts.c +++ b/arch/v850/kernel/asm-offsets.c diff --git a/arch/v850/kernel/entry.S b/arch/v850/kernel/entry.S index 895e27b1d839..d991e4547dbb 100644 --- a/arch/v850/kernel/entry.S +++ b/arch/v850/kernel/entry.S @@ -22,7 +22,7 @@ #include <asm/irq.h> #include <asm/errno.h> -#include <asm/asm-consts.h> +#include <asm/asm-offsets.h> /* Make a slightly more convenient alias for C_SYMBOL_NAME. */ diff --git a/arch/v850/kernel/irq.c b/arch/v850/kernel/irq.c index 336cbf21dc8f..9e85969ba976 100644 --- a/arch/v850/kernel/irq.c +++ b/arch/v850/kernel/irq.c @@ -67,13 +67,13 @@ static void ack_none(unsigned int irq) #define end_none enable_none struct hw_interrupt_type no_irq_type = { - "none", - startup_none, - shutdown_none, - enable_none, - disable_none, - ack_none, - end_none + .typename = "none", + .startup = startup_none, + .shutdown = shutdown_none, + .enable = enable_none, + .disable = disable_none, + .ack = ack_none, + .end = end_none }; volatile unsigned long irq_err_count, spurious_count; diff --git a/arch/v850/kernel/setup.c b/arch/v850/kernel/setup.c index c41d72b01b88..62bdb8d29fc0 100644 --- a/arch/v850/kernel/setup.c +++ b/arch/v850/kernel/setup.c @@ -1,8 +1,8 @@ /* * arch/v850/kernel/setup.c -- Arch-dependent initialization functions * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> + * Copyright (C) 2001,02,03,05 NEC Electronics Corporation + * Copyright (C) 2001,02,03,05 Miles Bader <miles@gnu.org> * * This file is subject to the terms and conditions of the GNU General * Public License. See the file COPYING in the main directory of this @@ -98,10 +98,20 @@ void __init trap_init (void) } #ifdef CONFIG_MTD + +/* From drivers/mtd/devices/slram.c */ +#define SLRAM_BLK_SZ 0x4000 + /* Set the root filesystem to be the given memory region. Some parameter may be appended to CMD_LINE. */ void set_mem_root (void *addr, size_t len, char *cmd_line) { + /* Some sort of idiocy in MTD means we must supply a length that's + a multiple of SLRAM_BLK_SZ. We just round up the real length, + as the file system shouldn't attempt to access anything beyond + the end of the image anyway. */ + len = (((len - 1) + SLRAM_BLK_SZ) / SLRAM_BLK_SZ) * SLRAM_BLK_SZ; + /* The only way to pass info to the MTD slram driver is via the command line. */ if (*cmd_line) { @@ -128,13 +138,13 @@ static void nmi_end (unsigned irq) } static struct hw_interrupt_type nmi_irq_type = { - "NMI", - irq_zero, /* startup */ - irq_nop, /* shutdown */ - irq_nop, /* enable */ - irq_nop, /* disable */ - irq_nop, /* ack */ - nmi_end, /* end */ + .typename = "NMI", + .startup = irq_zero, /* startup */ + .shutdown = irq_nop, /* shutdown */ + .enable = irq_nop, /* enable */ + .disable = irq_nop, /* disable */ + .ack = irq_nop, /* ack */ + .end = nmi_end, /* end */ }; void __init init_IRQ (void) @@ -284,3 +294,33 @@ init_mem_alloc (unsigned long ram_start, unsigned long ram_len) free_area_init_node (0, NODE_DATA(0), zones_size, ADDR_TO_PAGE (PAGE_OFFSET), 0); } + + + +/* Taken from m68knommu */ +void show_mem(void) +{ + unsigned long i; + int free = 0, total = 0, reserved = 0, shared = 0; + int cached = 0; + + printk(KERN_INFO "\nMem-info:\n"); + show_free_areas(); + i = max_mapnr; + while (i-- > 0) { + total++; + if (PageReserved(mem_map+i)) + reserved++; + else if (PageSwapCache(mem_map+i)) + cached++; + else if (!page_count(mem_map+i)) + free++; + else + shared += page_count(mem_map+i) - 1; + } + printk(KERN_INFO "%d pages of RAM\n",total); + printk(KERN_INFO "%d free pages\n",free); + printk(KERN_INFO "%d reserved pages\n",reserved); + printk(KERN_INFO "%d pages shared\n",shared); + printk(KERN_INFO "%d pages swap cached\n",cached); +} diff --git a/arch/v850/kernel/signal.c b/arch/v850/kernel/signal.c index 37061e32e1a4..633e4e1b825f 100644 --- a/arch/v850/kernel/signal.c +++ b/arch/v850/kernel/signal.c @@ -462,13 +462,12 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, else setup_frame(sig, ka, oldset, regs); - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); } /* diff --git a/arch/v850/kernel/sim.c b/arch/v850/kernel/sim.c index e2cc5580fa2a..17049aaa8f11 100644 --- a/arch/v850/kernel/sim.c +++ b/arch/v850/kernel/sim.c @@ -73,13 +73,13 @@ static void irq_nop (unsigned irq) { } static unsigned irq_zero (unsigned irq) { return 0; } static struct hw_interrupt_type sim_irq_type = { - "IRQ", - irq_zero, /* startup */ - irq_nop, /* shutdown */ - irq_nop, /* enable */ - irq_nop, /* disable */ - irq_nop, /* ack */ - irq_nop, /* end */ + .typename = "IRQ", + .startup = irq_zero, /* startup */ + .shutdown = irq_nop, /* shutdown */ + .enable = irq_nop, /* enable */ + .disable = irq_nop, /* disable */ + .ack = irq_nop, /* ack */ + .end = irq_nop, /* end */ }; void __init mach_init_irqs (void) diff --git a/arch/v850/kernel/time.c b/arch/v850/kernel/time.c index f722a268238a..ea3fd8844ff0 100644 --- a/arch/v850/kernel/time.c +++ b/arch/v850/kernel/time.c @@ -66,7 +66,7 @@ static irqreturn_t timer_interrupt (int irq, void *dummy, struct pt_regs *regs) * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { @@ -169,10 +169,7 @@ int do_settimeofday(struct timespec *tv) xtime.tv_sec = tv->tv_sec; xtime.tv_nsec = tv->tv_nsec; - time_adjust = 0; /* stop active adjtime () */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq (&xtime_lock); clock_was_set(); diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 660a03a89e66..e63323e03ea9 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -24,6 +24,10 @@ config X86 bool default y +config SEMAPHORE_SLEEPERS + bool + default y + config MMU bool default y @@ -61,6 +65,10 @@ config GENERIC_IOMAP bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + default y + source "init/Kconfig" @@ -144,7 +152,6 @@ config X86_CPUID with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to /dev/cpu/31/cpuid. -# disable it for opteron optimized builds because it pulls in ACPI_BOOT config X86_HT bool depends on SMP && !MK8 @@ -437,6 +444,11 @@ config ISA_DMA_API bool default y +config GENERIC_PENDING_IRQ + bool + depends on GENERIC_HARDIRQS && SMP + default y + menu "Power management options" source kernel/power/Kconfig @@ -461,7 +473,6 @@ config PCI_DIRECT config PCI_MMCONFIG bool "Support mmconfig PCI config space access" depends on PCI && ACPI - select ACPI_BOOT config UNORDERED_IO bool "Unordered IO mapping access" diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile index 4c6ed96d5f7c..a9cd42e61828 100644 --- a/arch/x86_64/Makefile +++ b/arch/x86_64/Makefile @@ -86,16 +86,6 @@ install fdimage fdimage144 fdimage288: vmlinux archclean: $(Q)$(MAKE) $(clean)=$(boot) -prepare: include/asm-$(ARCH)/offset.h - -arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \ - include/config/MARKER - -include/asm-$(ARCH)/offset.h: arch/$(ARCH)/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) - -CLEAN_FILES += include/asm-$(ARCH)/offset.h - define archhelp echo '* bzImage - Compressed kernel image (arch/$(ARCH)/boot/bzImage)' echo ' install - Install kernel using' diff --git a/arch/x86_64/boot/Makefile b/arch/x86_64/boot/Makefile index f4399c701b77..18c6e915d69b 100644 --- a/arch/x86_64/boot/Makefile +++ b/arch/x86_64/boot/Makefile @@ -46,7 +46,7 @@ cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/bootsect $(obj)/setup \ $(obj)/bzImage: $(obj)/bootsect $(obj)/setup \ $(obj)/vmlinux.bin $(obj)/tools/build FORCE $(call if_changed,image) - @echo 'Kernel: $@ is ready' + @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) diff --git a/arch/x86_64/boot/compressed/misc.c b/arch/x86_64/boot/compressed/misc.c index b38d5b8b5fb8..0e10fd84c7cc 100644 --- a/arch/x86_64/boot/compressed/misc.c +++ b/arch/x86_64/boot/compressed/misc.c @@ -83,7 +83,7 @@ static unsigned char *real_mode; /* Pointer to real-mode data */ #endif #define SCREEN_INFO (*(struct screen_info *)(real_mode+0)) -extern char input_data[]; +extern unsigned char input_data[]; extern int input_len; static long bytes_out = 0; @@ -288,7 +288,7 @@ void setup_normal_output_buffer(void) #else if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < 1024) error("Less than 2MB of memory"); #endif - output_data = (char *)__PHYSICAL_START; /* Normally Points to 1M */ + output_data = (unsigned char *)__PHYSICAL_START; /* Normally Points to 1M */ free_mem_end_ptr = (long)real_mode; } @@ -305,7 +305,7 @@ void setup_output_buffer_if_we_run_high(struct moveparams *mv) #else if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < (3*1024)) error("Less than 4MB of memory"); #endif - mv->low_buffer_start = output_data = (char *)LOW_BUFFER_START; + mv->low_buffer_start = output_data = (unsigned char *)LOW_BUFFER_START; low_buffer_end = ((unsigned int)real_mode > LOW_BUFFER_MAX ? LOW_BUFFER_MAX : (unsigned int)real_mode) & ~0xfff; low_buffer_size = low_buffer_end - LOW_BUFFER_START; diff --git a/arch/x86_64/boot/setup.S b/arch/x86_64/boot/setup.S index ff58b2832b75..12ea0b6c52e2 100644 --- a/arch/x86_64/boot/setup.S +++ b/arch/x86_64/boot/setup.S @@ -81,7 +81,7 @@ start: # This is the setup header, and it must start at %cs:2 (old 0x9020:2) .ascii "HdrS" # header signature - .word 0x0203 # header version number (>= 0x0105) + .word 0x0204 # header version number (>= 0x0105) # or else old loadlin-1.5 will fail) realmode_swtch: .word 0, 0 # default_switch, SETUPSEG start_sys_seg: .word SYSSEG diff --git a/arch/x86_64/boot/tools/build.c b/arch/x86_64/boot/tools/build.c index 18b5bac1c428..c44f5e2ec100 100644 --- a/arch/x86_64/boot/tools/build.c +++ b/arch/x86_64/boot/tools/build.c @@ -178,7 +178,9 @@ int main(int argc, char ** argv) die("Output: seek failed"); buf[0] = (sys_size & 0xff); buf[1] = ((sys_size >> 8) & 0xff); - if (write(1, buf, 2) != 2) + buf[2] = ((sys_size >> 16) & 0xff); + buf[3] = ((sys_size >> 24) & 0xff); + if (write(1, buf, 4) != 4) die("Write of image length failed"); return 0; /* Everything is OK */ diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index b97a61e1c71c..f8db7e500fbf 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -1,11 +1,12 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc6-git3 -# Fri Aug 12 16:40:34 2005 +# Linux kernel version: 2.6.13-git11 +# Mon Sep 12 16:16:16 2005 # CONFIG_X86_64=y CONFIG_64BIT=y CONFIG_X86=y +CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -13,6 +14,7 @@ CONFIG_X86_CMPXCHG=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -26,6 +28,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -37,6 +40,7 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y @@ -102,6 +106,7 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_HAVE_DEC_LOCK=y CONFIG_NR_CPUS=32 @@ -122,6 +127,7 @@ CONFIG_HZ=250 CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ISA_DMA_API=y +CONFIG_GENERIC_PENDING_IRQ=y # # Power management options @@ -135,8 +141,6 @@ CONFIG_PM_STD_PARTITION="" # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y @@ -151,10 +155,8 @@ CONFIG_ACPI_NUMA=y CONFIG_ACPI_TOSHIBA=y CONFIG_ACPI_BLACKLIST_YEAR=2001 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set @@ -198,7 +200,6 @@ CONFIG_UNORDERED_IO=y # CONFIG_PCIEPORTBUS is not set CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY_PROC is not set -# CONFIG_PCI_NAMES is not set # CONFIG_PCI_DEBUG is not set # @@ -238,7 +239,10 @@ CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set @@ -248,8 +252,8 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -CONFIG_IP_TCPDIAG_IPV6=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y CONFIG_IPV6=y @@ -262,6 +266,11 @@ CONFIG_IPV6=y # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -284,9 +293,11 @@ CONFIG_IPV6=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -333,7 +344,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" CONFIG_LBD=y # CONFIG_CDROM_PKTCDVD is not set @@ -413,6 +423,7 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set @@ -436,7 +447,7 @@ CONFIG_BLK_DEV_SD=y # # SCSI Transport Attributes # -# CONFIG_SCSI_SPI_ATTRS is not set +CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set @@ -462,6 +473,7 @@ CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set CONFIG_SCSI_ATA_PIIX=y +# CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_QSTOR is not set @@ -541,6 +553,11 @@ CONFIG_TUN=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y @@ -590,6 +607,7 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -599,6 +617,7 @@ CONFIG_TIGON3=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set @@ -753,7 +772,6 @@ CONFIG_MAX_RAW_DEVS=256 # I2C support # # CONFIG_I2C is not set -# CONFIG_I2C_SENSOR is not set # # Dallas's 1-wire bus @@ -764,6 +782,7 @@ CONFIG_MAX_RAW_DEVS=256 # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -772,6 +791,10 @@ CONFIG_HWMON=y # CONFIG_IBM_ASM is not set # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -862,9 +885,8 @@ CONFIG_USB_UHCI_HCD=y # # USB Device Class drivers # -# CONFIG_USB_AUDIO is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y @@ -881,6 +903,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # # USB Input Devices @@ -897,6 +920,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_MTOUCH is not set # CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_KEYSPAN_REMOTE is not set @@ -980,6 +1004,8 @@ CONFIG_USB_MON=y # Firmware Drivers # # CONFIG_EDD is not set +# CONFIG_DELL_RBU is not set +CONFIG_DCDBAS=m # # File systems @@ -1004,10 +1030,6 @@ CONFIG_REISERFS_FS_POSIX_ACL=y # CONFIG_REISERFS_FS_SECURITY is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -1016,6 +1038,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -1041,12 +1064,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -1078,6 +1100,7 @@ CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y @@ -1090,6 +1113,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1154,6 +1178,7 @@ CONFIG_OPROFILE=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=18 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1161,6 +1186,7 @@ CONFIG_LOG_BUF_SHIFT=18 # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_FRAME_POINTER is not set CONFIG_INIT_DEBUG=y # CONFIG_IOMMU_DEBUG is not set CONFIG_KPROBES=y @@ -1184,5 +1210,6 @@ CONFIG_KPROBES=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set diff --git a/arch/x86_64/ia32/ia32_ioctl.c b/arch/x86_64/ia32/ia32_ioctl.c index d259f8a6f811..419758f19ca4 100644 --- a/arch/x86_64/ia32/ia32_ioctl.c +++ b/arch/x86_64/ia32/ia32_ioctl.c @@ -24,17 +24,26 @@ static int tiocgdev(unsigned fd, unsigned cmd, unsigned int __user *ptr) { - struct file *file = fget(fd); + struct file *file; struct tty_struct *real_tty; + int fput_needed, ret; + file = fget_light(fd, &fput_needed); if (!file) return -EBADF; + + ret = -EINVAL; if (file->f_op->ioctl != tty_ioctl) - return -EINVAL; + goto out; real_tty = (struct tty_struct *)file->private_data; if (!real_tty) - return -EINVAL; - return put_user(new_encode_dev(tty_devnum(real_tty)), ptr); + goto out; + + ret = put_user(new_encode_dev(tty_devnum(real_tty)), ptr); + +out: + fput_light(file, fput_needed); + return ret; } #define RTC_IRQP_READ32 _IOR('p', 0x0b, unsigned int) /* Read IRQ rate */ diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S index c45d6a05b984..e0eb0c712fe9 100644 --- a/arch/x86_64/ia32/ia32entry.S +++ b/arch/x86_64/ia32/ia32entry.S @@ -6,7 +6,7 @@ #include <asm/dwarf2.h> #include <asm/calling.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> #include <asm/current.h> #include <asm/errno.h> #include <asm/ia32_unistd.h> @@ -55,20 +55,34 @@ * with the int 0x80 path. */ ENTRY(ia32_sysenter_target) - CFI_STARTPROC + CFI_STARTPROC simple + CFI_DEF_CFA rsp,0 + CFI_REGISTER rsp,rbp swapgs movq %gs:pda_kernelstack, %rsp addq $(PDA_STACKOFFSET),%rsp sti movl %ebp,%ebp /* zero extension */ pushq $__USER32_DS + CFI_ADJUST_CFA_OFFSET 8 + /*CFI_REL_OFFSET ss,0*/ pushq %rbp + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rsp,0 pushfq + CFI_ADJUST_CFA_OFFSET 8 + /*CFI_REL_OFFSET rflags,0*/ movl $VSYSCALL32_SYSEXIT, %r10d + CFI_REGISTER rip,r10 pushq $__USER32_CS + CFI_ADJUST_CFA_OFFSET 8 + /*CFI_REL_OFFSET cs,0*/ movl %eax, %eax pushq %r10 + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rip,0 pushq %rax + CFI_ADJUST_CFA_OFFSET 8 cld SAVE_ARGS 0,0,1 /* no need to do an access_ok check here because rbp has been @@ -79,6 +93,7 @@ ENTRY(ia32_sysenter_target) .previous GET_THREAD_INFO(%r10) testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%r10) + CFI_REMEMBER_STATE jnz sysenter_tracesys sysenter_do_call: cmpl $(IA32_NR_syscalls),%eax @@ -94,14 +109,20 @@ sysenter_do_call: andl $~0x200,EFLAGS-R11(%rsp) RESTORE_ARGS 1,24,1,1,1,1 popfq + CFI_ADJUST_CFA_OFFSET -8 + /*CFI_RESTORE rflags*/ popq %rcx /* User %esp */ + CFI_ADJUST_CFA_OFFSET -8 + CFI_REGISTER rsp,rcx movl $VSYSCALL32_SYSEXIT,%edx /* User %eip */ + CFI_REGISTER rip,rdx swapgs sti /* sti only takes effect after the next instruction */ /* sysexit */ .byte 0xf, 0x35 sysenter_tracesys: + CFI_RESTORE_STATE SAVE_REST CLEAR_RREGS movq $-ENOSYS,RAX(%rsp) /* really needed? */ @@ -140,21 +161,28 @@ sysenter_tracesys: * with the int 0x80 path. */ ENTRY(ia32_cstar_target) - CFI_STARTPROC + CFI_STARTPROC simple + CFI_DEF_CFA rsp,0 + CFI_REGISTER rip,rcx + /*CFI_REGISTER rflags,r11*/ swapgs movl %esp,%r8d + CFI_REGISTER rsp,r8 movq %gs:pda_kernelstack,%rsp sti SAVE_ARGS 8,1,1 movl %eax,%eax /* zero extension */ movq %rax,ORIG_RAX-ARGOFFSET(%rsp) movq %rcx,RIP-ARGOFFSET(%rsp) + CFI_REL_OFFSET rip,RIP-ARGOFFSET movq %rbp,RCX-ARGOFFSET(%rsp) /* this lies slightly to ptrace */ movl %ebp,%ecx movq $__USER32_CS,CS-ARGOFFSET(%rsp) movq $__USER32_DS,SS-ARGOFFSET(%rsp) movq %r11,EFLAGS-ARGOFFSET(%rsp) + /*CFI_REL_OFFSET rflags,EFLAGS-ARGOFFSET*/ movq %r8,RSP-ARGOFFSET(%rsp) + CFI_REL_OFFSET rsp,RSP-ARGOFFSET /* no need to do an access_ok check here because r8 has been 32bit zero extended */ /* hardware stack frame is complete now */ @@ -164,6 +192,7 @@ ENTRY(ia32_cstar_target) .previous GET_THREAD_INFO(%r10) testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%r10) + CFI_REMEMBER_STATE jnz cstar_tracesys cstar_do_call: cmpl $IA32_NR_syscalls,%eax @@ -177,12 +206,16 @@ cstar_do_call: jnz int_ret_from_sys_call RESTORE_ARGS 1,-ARG_SKIP,1,1,1 movl RIP-ARGOFFSET(%rsp),%ecx + CFI_REGISTER rip,rcx movl EFLAGS-ARGOFFSET(%rsp),%r11d + /*CFI_REGISTER rflags,r11*/ movl RSP-ARGOFFSET(%rsp),%esp + CFI_RESTORE rsp swapgs sysretl cstar_tracesys: + CFI_RESTORE_STATE SAVE_REST CLEAR_RREGS movq $-ENOSYS,RAX(%rsp) /* really needed? */ @@ -226,11 +259,18 @@ ia32_badarg: */ ENTRY(ia32_syscall) - CFI_STARTPROC + CFI_STARTPROC simple + CFI_DEF_CFA rsp,SS+8-RIP + /*CFI_REL_OFFSET ss,SS-RIP*/ + CFI_REL_OFFSET rsp,RSP-RIP + /*CFI_REL_OFFSET rflags,EFLAGS-RIP*/ + /*CFI_REL_OFFSET cs,CS-RIP*/ + CFI_REL_OFFSET rip,RIP-RIP swapgs sti movl %eax,%eax pushq %rax + CFI_ADJUST_CFA_OFFSET 8 cld /* note the registers are not zero extended to the sf. this could be a problem. */ @@ -278,6 +318,8 @@ quiet_ni_syscall: jmp ia32_ptregs_common .endm + CFI_STARTPROC + PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn, %rdi PTREGSCALL stub32_sigreturn, sys32_sigreturn, %rdi PTREGSCALL stub32_sigaltstack, sys32_sigaltstack, %rdx @@ -290,8 +332,9 @@ quiet_ni_syscall: PTREGSCALL stub32_rt_sigsuspend, sys_rt_sigsuspend, %rdx ENTRY(ia32_ptregs_common) - CFI_STARTPROC popq %r11 + CFI_ADJUST_CFA_OFFSET -8 + CFI_REGISTER rip, r11 SAVE_REST call *%rax RESTORE_REST @@ -307,7 +350,7 @@ ia32_sys_call_table: .quad stub32_fork .quad sys_read .quad sys_write - .quad sys32_open /* 5 */ + .quad compat_sys_open /* 5 */ .quad sys_close .quad sys32_waitpid .quad sys_creat diff --git a/arch/x86_64/ia32/sys_ia32.c b/arch/x86_64/ia32/sys_ia32.c index be996d1b691e..5389df610e78 100644 --- a/arch/x86_64/ia32/sys_ia32.c +++ b/arch/x86_64/ia32/sys_ia32.c @@ -751,7 +751,7 @@ sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset, s32 count) ret = sys_sendfile(out_fd, in_fd, offset ? &of : NULL, count); set_fs(old_fs); - if (!ret && offset && put_user(of, offset)) + if (offset && put_user(of, offset)) return -EFAULT; return ret; @@ -969,32 +969,6 @@ long sys32_kill(int pid, int sig) return sys_kill(pid, sig); } -asmlinkage long sys32_open(const char __user * filename, int flags, int mode) -{ - char * tmp; - int fd, error; - - /* don't force O_LARGEFILE */ - tmp = getname(filename); - fd = PTR_ERR(tmp); - if (!IS_ERR(tmp)) { - fd = get_unused_fd(); - if (fd >= 0) { - struct file *f = filp_open(tmp, flags, mode); - error = PTR_ERR(f); - if (IS_ERR(f)) { - put_unused_fd(fd); - fd = error; - } else { - fsnotify_open(f->f_dentry); - fd_install(fd, f); - } - } - putname(tmp); - } - return fd; -} - extern asmlinkage long sys_timer_create(clockid_t which_clock, struct sigevent __user *timer_event_spec, diff --git a/arch/x86_64/ia32/vsyscall-syscall.S b/arch/x86_64/ia32/vsyscall-syscall.S index e2aaf3de8a42..b024965bb689 100644 --- a/arch/x86_64/ia32/vsyscall-syscall.S +++ b/arch/x86_64/ia32/vsyscall-syscall.S @@ -3,7 +3,7 @@ */ #include <asm/ia32_unistd.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> #include <asm/segment.h> .text diff --git a/arch/x86_64/ia32/vsyscall-sysenter.S b/arch/x86_64/ia32/vsyscall-sysenter.S index 8fb8e0ff3afa..71f3de586b56 100644 --- a/arch/x86_64/ia32/vsyscall-sysenter.S +++ b/arch/x86_64/ia32/vsyscall-sysenter.S @@ -3,7 +3,7 @@ */ #include <asm/ia32_unistd.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> .text .section .text.vsyscall,"ax" diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index 48f9e2c19cd6..bcdd0a805fe7 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -4,15 +4,15 @@ extra-y := head.o head64.o init_task.o vmlinux.lds EXTRA_AFLAGS := -traditional -obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \ +obj-y := process.o signal.o entry.o traps.o irq.o \ ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_x86_64.o \ x8664_ksyms.o i387.o syscall.o vsyscall.o \ - setup64.o bootflag.o e820.o reboot.o quirks.o + setup64.o bootflag.o e820.o reboot.o quirks.o i8237.o obj-$(CONFIG_X86_MCE) += mce.o obj-$(CONFIG_X86_MCE_INTEL) += mce_intel.o obj-$(CONFIG_MTRR) += ../../i386/kernel/cpu/mtrr/ -obj-$(CONFIG_ACPI_BOOT) += acpi/ +obj-$(CONFIG_ACPI) += acpi/ obj-$(CONFIG_X86_MSR) += msr.o obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_X86_CPUID) += cpuid.o @@ -45,3 +45,5 @@ swiotlb-$(CONFIG_SWIOTLB) += ../../ia64/lib/swiotlb.o microcode-$(subst m,y,$(CONFIG_MICROCODE)) += ../../i386/kernel/microcode.o intel_cacheinfo-y += ../../i386/kernel/cpu/intel_cacheinfo.o quirks-y += ../../i386/kernel/quirks.o +i8237-y += ../../i386/kernel/i8237.o +msr-$(subst m,y,$(CONFIG_X86_MSR)) += ../../i386/kernel/msr.o diff --git a/arch/x86_64/kernel/acpi/Makefile b/arch/x86_64/kernel/acpi/Makefile index d2c2ee5f9a88..7da9ace890bd 100644 --- a/arch/x86_64/kernel/acpi/Makefile +++ b/arch/x86_64/kernel/acpi/Makefile @@ -1,3 +1,3 @@ -obj-$(CONFIG_ACPI_BOOT) := boot.o -boot-$(CONFIG_ACPI_BOOT) := ../../../i386/kernel/acpi/boot.o +obj-y := boot.o +boot-y := ../../../i386/kernel/acpi/boot.o obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o diff --git a/arch/x86_64/kernel/acpi/sleep.c b/arch/x86_64/kernel/acpi/sleep.c index 7a275de6df22..867a0ebee177 100644 --- a/arch/x86_64/kernel/acpi/sleep.c +++ b/arch/x86_64/kernel/acpi/sleep.c @@ -34,7 +34,6 @@ #include <linux/slab.h> #include <linux/pci.h> #include <linux/bootmem.h> -#include <linux/irq.h> #include <linux/acpi.h> #include <asm/mpspec.h> #include <asm/io.h> @@ -47,7 +46,6 @@ #include <asm/proto.h> #include <asm/tlbflush.h> - /* -------------------------------------------------------------------------- Low-Level Sleep Support -------------------------------------------------------------------------- */ @@ -77,11 +75,12 @@ static void init_low_mapping(void) * Create an identity mapped page table and copy the wakeup routine to * low memory. */ -int acpi_save_state_mem (void) +int acpi_save_state_mem(void) { init_low_mapping(); - memcpy((void *) acpi_wakeup_address, &wakeup_start, &wakeup_end - &wakeup_start); + memcpy((void *)acpi_wakeup_address, &wakeup_start, + &wakeup_end - &wakeup_start); acpi_copy_wakeup_routine(acpi_wakeup_address); return 0; @@ -90,7 +89,7 @@ int acpi_save_state_mem (void) /* * acpi_restore_state */ -void acpi_restore_state_mem (void) +void acpi_restore_state_mem(void) { set_pgd(pgd_offset(current->mm, 0UL), low_ptr); flush_tlb_all(); @@ -108,7 +107,8 @@ void __init acpi_reserve_bootmem(void) { acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE); if ((&wakeup_end - &wakeup_start) > PAGE_SIZE) - printk(KERN_CRIT "ACPI: Wakeup code way too big, will crash on attempt to suspend\n"); + printk(KERN_CRIT + "ACPI: Wakeup code way too big, will crash on attempt to suspend\n"); } static int __init acpi_sleep_setup(char *str) @@ -127,6 +127,8 @@ static int __init acpi_sleep_setup(char *str) __setup("acpi_sleep=", acpi_sleep_setup); -#endif /*CONFIG_ACPI_SLEEP*/ +#endif /*CONFIG_ACPI_SLEEP */ -void acpi_pci_link_exit(void) {} +void acpi_pci_link_exit(void) +{ +} diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c index c9a6b812e926..962ad4823b6a 100644 --- a/arch/x86_64/kernel/aperture.c +++ b/arch/x86_64/kernel/aperture.c @@ -245,6 +245,8 @@ void __init iommu_hole_init(void) if (aper_alloc) { /* Got the aperture from the AGP bridge */ + } else if (swiotlb && !valid_agp) { + /* Do nothing */ } else if ((!no_iommu && end_pfn >= 0xffffffff>>PAGE_SHIFT) || force_iommu || valid_agp || diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index 375d369570ca..b6e7715d877f 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -18,7 +18,6 @@ #include <linux/init.h> #include <linux/mm.h> -#include <linux/irq.h> #include <linux/delay.h> #include <linux/bootmem.h> #include <linux/smp_lock.h> @@ -109,11 +108,8 @@ void clear_local_APIC(void) if (maxlvt >= 4) apic_write_around(APIC_LVTPC, APIC_LVT_MASKED); v = GET_APIC_VERSION(apic_read(APIC_LVR)); - if (APIC_INTEGRATED(v)) { /* !82489DX */ - if (maxlvt > 3) /* Due to Pentium errata 3AP and 11AP. */ - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - } + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); } void __init connect_bsp_APIC(void) @@ -316,8 +312,6 @@ void __init init_bsp_APIC(void) */ apic_write_around(APIC_LVT0, APIC_DM_EXTINT); value = APIC_DM_NMI; - if (!APIC_INTEGRATED(ver)) /* 82489DX */ - value |= APIC_LVT_LEVEL_TRIGGER; apic_write_around(APIC_LVT1, value); } @@ -325,14 +319,6 @@ void __cpuinit setup_local_APIC (void) { unsigned int value, ver, maxlvt; - /* Pound the ESR really hard over the head with a big hammer - mbligh */ - if (esr_disable) { - apic_write(APIC_ESR, 0); - apic_write(APIC_ESR, 0); - apic_write(APIC_ESR, 0); - apic_write(APIC_ESR, 0); - } - value = apic_read(APIC_LVR); ver = GET_APIC_VERSION(value); @@ -430,15 +416,11 @@ void __cpuinit setup_local_APIC (void) value = APIC_DM_NMI; else value = APIC_DM_NMI | APIC_LVT_MASKED; - if (!APIC_INTEGRATED(ver)) /* 82489DX */ - value |= APIC_LVT_LEVEL_TRIGGER; apic_write_around(APIC_LVT1, value); - if (APIC_INTEGRATED(ver) && !esr_disable) { /* !82489DX */ + { unsigned oldvalue; maxlvt = get_maxlvt(); - if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ - apic_write(APIC_ESR, 0); oldvalue = apic_read(APIC_ESR); value = ERROR_APIC_VECTOR; // enables sending errors apic_write_around(APIC_LVTERR, value); @@ -452,17 +434,6 @@ void __cpuinit setup_local_APIC (void) apic_printk(APIC_VERBOSE, "ESR value after enabling vector: %08x, after %08x\n", oldvalue, value); - } else { - if (esr_disable) - /* - * Something untraceble is creating bad interrupts on - * secondary quads ... for the moment, just leave the - * ESR disabled - we can't do anything useful with the - * errors anyway - mbligh - */ - apic_printk(APIC_DEBUG, "Leaving ESR disabled.\n"); - else - apic_printk(APIC_DEBUG, "No ESR for 82489DX.\n"); } nmi_watchdog_default(); @@ -650,8 +621,7 @@ void __init init_apic_mappings(void) * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). */ - if (boot_cpu_id == -1U) - boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID)); + boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID)); #ifdef CONFIG_X86_IO_APIC { @@ -693,8 +663,6 @@ static void __setup_APIC_LVTT(unsigned int clocks) ver = GET_APIC_VERSION(apic_read(APIC_LVR)); lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR; - if (!APIC_INTEGRATED(ver)) - lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV); apic_write_around(APIC_LVTT, lvtt_value); /* @@ -1081,7 +1049,7 @@ int __init APIC_init_uniprocessor (void) connect_bsp_APIC(); - phys_cpu_present_map = physid_mask_of_physid(0); + phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id); apic_write_around(APIC_ID, boot_cpu_id); setup_local_APIC(); diff --git a/arch/x86_64/kernel/asm-offsets.c b/arch/x86_64/kernel/asm-offsets.c index 35b4c3fcbb37..aaa6d3833517 100644 --- a/arch/x86_64/kernel/asm-offsets.c +++ b/arch/x86_64/kernel/asm-offsets.c @@ -39,7 +39,6 @@ int main(void) ENTRY(kernelstack); ENTRY(oldrsp); ENTRY(pcurrent); - ENTRY(irqrsp); ENTRY(irqcount); ENTRY(cpunumber); ENTRY(irqstackptr); diff --git a/arch/x86_64/kernel/crash.c b/arch/x86_64/kernel/crash.c index d7fa4248501c..535e04466079 100644 --- a/arch/x86_64/kernel/crash.c +++ b/arch/x86_64/kernel/crash.c @@ -11,7 +11,6 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/smp.h> -#include <linux/irq.h> #include <linux/reboot.h> #include <linux/kexec.h> diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c index b548dea4e5b9..eb7929eea7b3 100644 --- a/arch/x86_64/kernel/e820.c +++ b/arch/x86_64/kernel/e820.c @@ -85,7 +85,7 @@ int __init e820_mapped(unsigned long start, unsigned long end, unsigned type) struct e820entry *ei = &e820.map[i]; if (type && ei->type != type) continue; - if (ei->addr >= end || ei->addr + ei->size < start) + if (ei->addr >= end || ei->addr + ei->size <= start) continue; return 1; } @@ -131,7 +131,7 @@ void __init e820_bootmem_free(pg_data_t *pgdat, unsigned long start,unsigned lon if (ei->type != E820_RAM || ei->addr+ei->size <= start || - ei->addr > end) + ei->addr >= end) continue; addr = round_up(ei->addr, PAGE_SIZE); @@ -567,7 +567,7 @@ unsigned long pci_mem_start = 0xaeedbabe; */ __init void e820_setup_gap(void) { - unsigned long gapstart, gapsize; + unsigned long gapstart, gapsize, round; unsigned long last; int i; int found = 0; @@ -604,14 +604,14 @@ __init void e820_setup_gap(void) } /* - * Start allocating dynamic PCI memory a bit into the gap, - * aligned up to the nearest megabyte. - * - * Question: should we try to pad it up a bit (do something - * like " + (gapsize >> 3)" in there too?). We now have the - * technology. + * See how much we want to round up: start off with + * rounding to the next 1MB area. */ - pci_mem_start = (gapstart + 0xfffff) & ~0xfffff; + round = 0x100000; + while ((gapsize >> 4) > round) + round += round; + /* Fun with two's complement */ + pci_mem_start = (gapstart + round) & -round; printk(KERN_INFO "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n", pci_mem_start, gapstart, gapsize); diff --git a/arch/x86_64/kernel/early_printk.c b/arch/x86_64/kernel/early_printk.c index 9631c747c5e3..9cd968dd0f5a 100644 --- a/arch/x86_64/kernel/early_printk.c +++ b/arch/x86_64/kernel/early_printk.c @@ -5,6 +5,7 @@ #include <linux/tty.h> #include <asm/io.h> #include <asm/processor.h> +#include <asm/fcntl.h> /* Simple VGA output */ @@ -158,6 +159,47 @@ static struct console early_serial_console = { .index = -1, }; +/* Console interface to a host file on AMD's SimNow! */ + +static int simnow_fd; + +enum { + MAGIC1 = 0xBACCD00A, + MAGIC2 = 0xCA110000, + XOPEN = 5, + XWRITE = 4, +}; + +static noinline long simnow(long cmd, long a, long b, long c) +{ + long ret; + asm volatile("cpuid" : + "=a" (ret) : + "b" (a), "c" (b), "d" (c), "0" (MAGIC1), "D" (cmd + MAGIC2)); + return ret; +} + +void __init simnow_init(char *str) +{ + char *fn = "klog"; + if (*str == '=') + fn = ++str; + /* error ignored */ + simnow_fd = simnow(XOPEN, (unsigned long)fn, O_WRONLY|O_APPEND|O_CREAT, 0644); +} + +static void simnow_write(struct console *con, const char *s, unsigned n) +{ + simnow(XWRITE, simnow_fd, (unsigned long)s, n); +} + +static struct console simnow_console = { + .name = "simnow", + .write = simnow_write, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + /* Direct interface for emergencies */ struct console *early_console = &early_vga_console; static int early_console_initialized = 0; @@ -205,6 +247,10 @@ int __init setup_early_printk(char *opt) max_xpos = SCREEN_INFO.orig_video_cols; max_ypos = SCREEN_INFO.orig_video_lines; early_console = &early_vga_console; + } else if (!strncmp(buf, "simnow", 6)) { + simnow_init(buf + 6); + early_console = &simnow_console; + keep_early = 1; } early_console_initialized = 1; register_console(early_console); diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S index 096d470e280f..7937971d1853 100644 --- a/arch/x86_64/kernel/entry.S +++ b/arch/x86_64/kernel/entry.S @@ -36,7 +36,7 @@ #include <asm/errno.h> #include <asm/dwarf2.h> #include <asm/calling.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> #include <asm/msr.h> #include <asm/unistd.h> #include <asm/thread_info.h> @@ -79,16 +79,19 @@ xorl %eax, %eax pushq %rax /* ss */ CFI_ADJUST_CFA_OFFSET 8 + /*CFI_REL_OFFSET ss,0*/ pushq %rax /* rsp */ CFI_ADJUST_CFA_OFFSET 8 - CFI_OFFSET rip,0 + CFI_REL_OFFSET rsp,0 pushq $(1<<9) /* eflags - interrupts on */ CFI_ADJUST_CFA_OFFSET 8 + /*CFI_REL_OFFSET rflags,0*/ pushq $__KERNEL_CS /* cs */ CFI_ADJUST_CFA_OFFSET 8 + /*CFI_REL_OFFSET cs,0*/ pushq \child_rip /* rip */ CFI_ADJUST_CFA_OFFSET 8 - CFI_OFFSET rip,0 + CFI_REL_OFFSET rip,0 pushq %rax /* orig rax */ CFI_ADJUST_CFA_OFFSET 8 .endm @@ -98,32 +101,39 @@ CFI_ADJUST_CFA_OFFSET -(6*8) .endm - .macro CFI_DEFAULT_STACK - CFI_ADJUST_CFA_OFFSET (SS) - CFI_OFFSET r15,R15-SS - CFI_OFFSET r14,R14-SS - CFI_OFFSET r13,R13-SS - CFI_OFFSET r12,R12-SS - CFI_OFFSET rbp,RBP-SS - CFI_OFFSET rbx,RBX-SS - CFI_OFFSET r11,R11-SS - CFI_OFFSET r10,R10-SS - CFI_OFFSET r9,R9-SS - CFI_OFFSET r8,R8-SS - CFI_OFFSET rax,RAX-SS - CFI_OFFSET rcx,RCX-SS - CFI_OFFSET rdx,RDX-SS - CFI_OFFSET rsi,RSI-SS - CFI_OFFSET rdi,RDI-SS - CFI_OFFSET rsp,RSP-SS - CFI_OFFSET rip,RIP-SS + .macro CFI_DEFAULT_STACK start=1 + .if \start + CFI_STARTPROC simple + CFI_DEF_CFA rsp,SS+8 + .else + CFI_DEF_CFA_OFFSET SS+8 + .endif + CFI_REL_OFFSET r15,R15 + CFI_REL_OFFSET r14,R14 + CFI_REL_OFFSET r13,R13 + CFI_REL_OFFSET r12,R12 + CFI_REL_OFFSET rbp,RBP + CFI_REL_OFFSET rbx,RBX + CFI_REL_OFFSET r11,R11 + CFI_REL_OFFSET r10,R10 + CFI_REL_OFFSET r9,R9 + CFI_REL_OFFSET r8,R8 + CFI_REL_OFFSET rax,RAX + CFI_REL_OFFSET rcx,RCX + CFI_REL_OFFSET rdx,RDX + CFI_REL_OFFSET rsi,RSI + CFI_REL_OFFSET rdi,RDI + CFI_REL_OFFSET rip,RIP + /*CFI_REL_OFFSET cs,CS*/ + /*CFI_REL_OFFSET rflags,EFLAGS*/ + CFI_REL_OFFSET rsp,RSP + /*CFI_REL_OFFSET ss,SS*/ .endm /* * A newly forked process directly context switches into this. */ /* rdi: prev */ ENTRY(ret_from_fork) - CFI_STARTPROC CFI_DEFAULT_STACK call schedule_tail GET_THREAD_INFO(%rcx) @@ -172,16 +182,21 @@ rff_trace: */ ENTRY(system_call) - CFI_STARTPROC + CFI_STARTPROC simple + CFI_DEF_CFA rsp,0 + CFI_REGISTER rip,rcx + /*CFI_REGISTER rflags,r11*/ swapgs movq %rsp,%gs:pda_oldrsp movq %gs:pda_kernelstack,%rsp sti SAVE_ARGS 8,1 movq %rax,ORIG_RAX-ARGOFFSET(%rsp) - movq %rcx,RIP-ARGOFFSET(%rsp) + movq %rcx,RIP-ARGOFFSET(%rsp) + CFI_REL_OFFSET rip,RIP-ARGOFFSET GET_THREAD_INFO(%rcx) testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%rcx) + CFI_REMEMBER_STATE jnz tracesys cmpq $__NR_syscall_max,%rax ja badsys @@ -201,9 +216,12 @@ sysret_check: cli movl threadinfo_flags(%rcx),%edx andl %edi,%edx + CFI_REMEMBER_STATE jnz sysret_careful movq RIP-ARGOFFSET(%rsp),%rcx + CFI_REGISTER rip,rcx RESTORE_ARGS 0,-ARG_SKIP,1 + /*CFI_REGISTER rflags,r11*/ movq %gs:pda_oldrsp,%rsp swapgs sysretq @@ -211,12 +229,15 @@ sysret_check: /* Handle reschedules */ /* edx: work, edi: workmask */ sysret_careful: + CFI_RESTORE_STATE bt $TIF_NEED_RESCHED,%edx jnc sysret_signal sti pushq %rdi + CFI_ADJUST_CFA_OFFSET 8 call schedule popq %rdi + CFI_ADJUST_CFA_OFFSET -8 jmp sysret_check /* Handle a signal */ @@ -234,8 +255,13 @@ sysret_signal: 1: movl $_TIF_NEED_RESCHED,%edi jmp sysret_check +badsys: + movq $-ENOSYS,RAX-ARGOFFSET(%rsp) + jmp ret_from_sys_call + /* Do syscall tracing */ tracesys: + CFI_RESTORE_STATE SAVE_REST movq $-ENOSYS,RAX(%rsp) FIXUP_TOP_OF_STACK %rdi @@ -254,16 +280,29 @@ tracesys: RESTORE_TOP_OF_STACK %rbx RESTORE_REST jmp ret_from_sys_call + CFI_ENDPROC -badsys: - movq $-ENOSYS,RAX-ARGOFFSET(%rsp) - jmp ret_from_sys_call - /* * Syscall return path ending with IRET. * Has correct top of stack, but partial stack frame. */ -ENTRY(int_ret_from_sys_call) +ENTRY(int_ret_from_sys_call) + CFI_STARTPROC simple + CFI_DEF_CFA rsp,SS+8-ARGOFFSET + /*CFI_REL_OFFSET ss,SS-ARGOFFSET*/ + CFI_REL_OFFSET rsp,RSP-ARGOFFSET + /*CFI_REL_OFFSET rflags,EFLAGS-ARGOFFSET*/ + /*CFI_REL_OFFSET cs,CS-ARGOFFSET*/ + CFI_REL_OFFSET rip,RIP-ARGOFFSET + CFI_REL_OFFSET rdx,RDX-ARGOFFSET + CFI_REL_OFFSET rcx,RCX-ARGOFFSET + CFI_REL_OFFSET rax,RAX-ARGOFFSET + CFI_REL_OFFSET rdi,RDI-ARGOFFSET + CFI_REL_OFFSET rsi,RSI-ARGOFFSET + CFI_REL_OFFSET r8,R8-ARGOFFSET + CFI_REL_OFFSET r9,R9-ARGOFFSET + CFI_REL_OFFSET r10,R10-ARGOFFSET + CFI_REL_OFFSET r11,R11-ARGOFFSET cli testl $3,CS-ARGOFFSET(%rsp) je retint_restore_args @@ -284,8 +323,10 @@ int_careful: jnc int_very_careful sti pushq %rdi + CFI_ADJUST_CFA_OFFSET 8 call schedule popq %rdi + CFI_ADJUST_CFA_OFFSET -8 cli jmp int_with_check @@ -297,9 +338,11 @@ int_very_careful: testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edx jz int_signal pushq %rdi + CFI_ADJUST_CFA_OFFSET 8 leaq 8(%rsp),%rdi # &ptregs -> arg1 call syscall_trace_leave popq %rdi + CFI_ADJUST_CFA_OFFSET -8 andl $~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edi cli jmp int_restore_rest @@ -329,6 +372,8 @@ int_restore_rest: jmp ptregscall_common .endm + CFI_STARTPROC + PTREGSCALL stub_clone, sys_clone, %r8 PTREGSCALL stub_fork, sys_fork, %rdi PTREGSCALL stub_vfork, sys_vfork, %rdi @@ -337,40 +382,49 @@ int_restore_rest: PTREGSCALL stub_iopl, sys_iopl, %rsi ENTRY(ptregscall_common) - CFI_STARTPROC popq %r11 - CFI_ADJUST_CFA_OFFSET -8 + CFI_ADJUST_CFA_OFFSET -8 + CFI_REGISTER rip, r11 SAVE_REST movq %r11, %r15 + CFI_REGISTER rip, r15 FIXUP_TOP_OF_STACK %r11 call *%rax RESTORE_TOP_OF_STACK %r11 movq %r15, %r11 + CFI_REGISTER rip, r11 RESTORE_REST pushq %r11 - CFI_ADJUST_CFA_OFFSET 8 + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rip, 0 ret CFI_ENDPROC ENTRY(stub_execve) CFI_STARTPROC popq %r11 - CFI_ADJUST_CFA_OFFSET -8 + CFI_ADJUST_CFA_OFFSET -8 + CFI_REGISTER rip, r11 SAVE_REST movq %r11, %r15 + CFI_REGISTER rip, r15 FIXUP_TOP_OF_STACK %r11 call sys_execve GET_THREAD_INFO(%rcx) bt $TIF_IA32,threadinfo_flags(%rcx) + CFI_REMEMBER_STATE jc exec_32bit RESTORE_TOP_OF_STACK %r11 movq %r15, %r11 + CFI_REGISTER rip, r11 RESTORE_REST - push %r11 + pushq %r11 + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rip, 0 ret exec_32bit: - CFI_ADJUST_CFA_OFFSET REST_SKIP + CFI_RESTORE_STATE movq %rax,RAX(%rsp) RESTORE_REST jmp int_ret_from_sys_call @@ -382,7 +436,8 @@ exec_32bit: */ ENTRY(stub_rt_sigreturn) CFI_STARTPROC - addq $8, %rsp + addq $8, %rsp + CFI_ADJUST_CFA_OFFSET -8 SAVE_REST movq %rsp,%rdi FIXUP_TOP_OF_STACK %r11 @@ -392,6 +447,25 @@ ENTRY(stub_rt_sigreturn) jmp int_ret_from_sys_call CFI_ENDPROC +/* + * initial frame state for interrupts and exceptions + */ + .macro _frame ref + CFI_STARTPROC simple + CFI_DEF_CFA rsp,SS+8-\ref + /*CFI_REL_OFFSET ss,SS-\ref*/ + CFI_REL_OFFSET rsp,RSP-\ref + /*CFI_REL_OFFSET rflags,EFLAGS-\ref*/ + /*CFI_REL_OFFSET cs,CS-\ref*/ + CFI_REL_OFFSET rip,RIP-\ref + .endm + +/* initial frame state for interrupts (and exceptions without error code) */ +#define INTR_FRAME _frame RIP +/* initial frame state for exceptions with error code (and interrupts with + vector already pushed) */ +#define XCPT_FRAME _frame ORIG_RAX + /* * Interrupt entry/exit. * @@ -402,10 +476,6 @@ ENTRY(stub_rt_sigreturn) /* 0(%rsp): interrupt number */ .macro interrupt func - CFI_STARTPROC simple - CFI_DEF_CFA rsp,(SS-RDI) - CFI_REL_OFFSET rsp,(RSP-ORIG_RAX) - CFI_REL_OFFSET rip,(RIP-ORIG_RAX) cld #ifdef CONFIG_DEBUG_INFO SAVE_ALL @@ -425,23 +495,27 @@ ENTRY(stub_rt_sigreturn) swapgs 1: incl %gs:pda_irqcount # RED-PEN should check preempt count movq %gs:pda_irqstackptr,%rax - cmoveq %rax,%rsp + cmoveq %rax,%rsp /*todo This needs CFI annotation! */ pushq %rdi # save old stack + CFI_ADJUST_CFA_OFFSET 8 call \func .endm ENTRY(common_interrupt) + XCPT_FRAME interrupt do_IRQ /* 0(%rsp): oldrsp-ARGOFFSET */ -ret_from_intr: +ret_from_intr: popq %rdi + CFI_ADJUST_CFA_OFFSET -8 cli decl %gs:pda_irqcount #ifdef CONFIG_DEBUG_INFO movq RBP(%rdi),%rbp + CFI_DEF_CFA_REGISTER rsp #endif - leaq ARGOFFSET(%rdi),%rsp -exit_intr: + leaq ARGOFFSET(%rdi),%rsp /*todo This needs CFI annotation! */ +exit_intr: GET_THREAD_INFO(%rcx) testl $3,CS-ARGOFFSET(%rsp) je retint_kernel @@ -453,9 +527,10 @@ exit_intr: */ retint_with_reschedule: movl $_TIF_WORK_MASK,%edi -retint_check: +retint_check: movl threadinfo_flags(%rcx),%edx andl %edi,%edx + CFI_REMEMBER_STATE jnz retint_careful retint_swapgs: swapgs @@ -476,14 +551,17 @@ bad_iret: jmp do_exit .previous - /* edi: workmask, edx: work */ + /* edi: workmask, edx: work */ retint_careful: + CFI_RESTORE_STATE bt $TIF_NEED_RESCHED,%edx jnc retint_signal sti pushq %rdi + CFI_ADJUST_CFA_OFFSET 8 call schedule popq %rdi + CFI_ADJUST_CFA_OFFSET -8 GET_THREAD_INFO(%rcx) cli jmp retint_check @@ -523,7 +601,9 @@ retint_kernel: * APIC interrupts. */ .macro apicinterrupt num,func + INTR_FRAME pushq $\num-256 + CFI_ADJUST_CFA_OFFSET 8 interrupt \func jmp ret_from_intr CFI_ENDPROC @@ -536,8 +616,19 @@ ENTRY(thermal_interrupt) ENTRY(reschedule_interrupt) apicinterrupt RESCHEDULE_VECTOR,smp_reschedule_interrupt -ENTRY(invalidate_interrupt) - apicinterrupt INVALIDATE_TLB_VECTOR,smp_invalidate_interrupt + .macro INVALIDATE_ENTRY num +ENTRY(invalidate_interrupt\num) + apicinterrupt INVALIDATE_TLB_VECTOR_START+\num,smp_invalidate_interrupt + .endm + + INVALIDATE_ENTRY 0 + INVALIDATE_ENTRY 1 + INVALIDATE_ENTRY 2 + INVALIDATE_ENTRY 3 + INVALIDATE_ENTRY 4 + INVALIDATE_ENTRY 5 + INVALIDATE_ENTRY 6 + INVALIDATE_ENTRY 7 ENTRY(call_function_interrupt) apicinterrupt CALL_FUNCTION_VECTOR,smp_call_function_interrupt @@ -558,16 +649,23 @@ ENTRY(spurious_interrupt) * Exception entry points. */ .macro zeroentry sym + INTR_FRAME pushq $0 /* push error code/oldrax */ + CFI_ADJUST_CFA_OFFSET 8 pushq %rax /* push real oldrax to the rdi slot */ + CFI_ADJUST_CFA_OFFSET 8 leaq \sym(%rip),%rax jmp error_entry + CFI_ENDPROC .endm .macro errorentry sym + XCPT_FRAME pushq %rax + CFI_ADJUST_CFA_OFFSET 8 leaq \sym(%rip),%rax jmp error_entry + CFI_ENDPROC .endm /* error code is on the stack already */ @@ -594,10 +692,7 @@ ENTRY(spurious_interrupt) * and the exception handler in %rax. */ ENTRY(error_entry) - CFI_STARTPROC simple - CFI_DEF_CFA rsp,(SS-RDI) - CFI_REL_OFFSET rsp,(RSP-RDI) - CFI_REL_OFFSET rip,(RIP-RDI) + _frame RDI /* rdi slot contains rax, oldrax contains error code */ cld subq $14*8,%rsp @@ -679,7 +774,9 @@ error_kernelspace: /* Reload gs selector with exception handling */ /* edi: new selector */ ENTRY(load_gs_index) + CFI_STARTPROC pushf + CFI_ADJUST_CFA_OFFSET 8 cli swapgs gs_change: @@ -687,7 +784,9 @@ gs_change: 2: mfence /* workaround */ swapgs popf + CFI_ADJUST_CFA_OFFSET -8 ret + CFI_ENDPROC .section __ex_table,"a" .align 8 @@ -784,8 +883,9 @@ ENTRY(execve) ret CFI_ENDPROC -ENTRY(page_fault) +KPROBE_ENTRY(page_fault) errorentry do_page_fault + .previous .text ENTRY(coprocessor_error) zeroentry do_coprocessor_error @@ -797,19 +897,20 @@ ENTRY(device_not_available) zeroentry math_state_restore /* runs on exception stack */ -ENTRY(debug) - CFI_STARTPROC +KPROBE_ENTRY(debug) + INTR_FRAME pushq $0 CFI_ADJUST_CFA_OFFSET 8 paranoidentry do_debug jmp paranoid_exit CFI_ENDPROC + .previous .text /* runs on exception stack */ ENTRY(nmi) - CFI_STARTPROC + INTR_FRAME pushq $-1 - CFI_ADJUST_CFA_OFFSET 8 + CFI_ADJUST_CFA_OFFSET 8 paranoidentry do_nmi /* * "Paranoid" exit path from exception stack. @@ -854,8 +955,9 @@ paranoid_schedule: jmp paranoid_userspace CFI_ENDPROC -ENTRY(int3) +KPROBE_ENTRY(int3) zeroentry do_int3 + .previous .text ENTRY(overflow) zeroentry do_overflow @@ -874,7 +976,7 @@ ENTRY(reserved) /* runs on exception stack */ ENTRY(double_fault) - CFI_STARTPROC + XCPT_FRAME paranoidentry do_double_fault jmp paranoid_exit CFI_ENDPROC @@ -887,13 +989,14 @@ ENTRY(segment_not_present) /* runs on exception stack */ ENTRY(stack_segment) - CFI_STARTPROC + XCPT_FRAME paranoidentry do_stack_segment jmp paranoid_exit CFI_ENDPROC -ENTRY(general_protection) +KPROBE_ENTRY(general_protection) errorentry do_general_protection + .previous .text ENTRY(alignment_check) errorentry do_alignment_check @@ -907,7 +1010,7 @@ ENTRY(spurious_interrupt_bug) #ifdef CONFIG_X86_MCE /* runs on exception stack */ ENTRY(machine_check) - CFI_STARTPROC + INTR_FRAME pushq $0 CFI_ADJUST_CFA_OFFSET 8 paranoidentry do_machine_check @@ -919,14 +1022,19 @@ ENTRY(call_debug) zeroentry do_call_debug ENTRY(call_softirq) + CFI_STARTPROC movq %gs:pda_irqstackptr,%rax pushq %r15 + CFI_ADJUST_CFA_OFFSET 8 movq %rsp,%r15 + CFI_DEF_CFA_REGISTER r15 incl %gs:pda_irqcount cmove %rax,%rsp call __do_softirq movq %r15,%rsp + CFI_DEF_CFA_REGISTER rsp decl %gs:pda_irqcount popq %r15 + CFI_ADJUST_CFA_OFFSET -8 ret - + CFI_ENDPROC diff --git a/arch/x86_64/kernel/genapic.c b/arch/x86_64/kernel/genapic.c index 30c843a5efdd..7a64ea181788 100644 --- a/arch/x86_64/kernel/genapic.c +++ b/arch/x86_64/kernel/genapic.c @@ -20,12 +20,12 @@ #include <asm/smp.h> #include <asm/ipi.h> -#if defined(CONFIG_ACPI_BUS) +#if defined(CONFIG_ACPI) #include <acpi/acpi_bus.h> #endif /* which logical CPU number maps to which CPU (physical APIC ID) */ -u8 x86_cpu_to_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; +u8 x86_cpu_to_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; EXPORT_SYMBOL(x86_cpu_to_apicid); u8 x86_cpu_to_log_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; @@ -45,9 +45,9 @@ void __init clustered_apic_check(void) u8 clusters, max_cluster; u8 id; u8 cluster_cnt[NUM_APIC_CLUSTERS]; - int num_cpus = 0; + int max_apic = 0; -#if defined(CONFIG_ACPI_BUS) +#if defined(CONFIG_ACPI) /* * Some x86_64 machines use physical APIC mode regardless of how many * procs/clusters are present (x86_64 ES7000 is an example). @@ -64,14 +64,15 @@ void __init clustered_apic_check(void) id = bios_cpu_apicid[i]; if (id == BAD_APICID) continue; - num_cpus++; + if (id > max_apic) + max_apic = id; cluster_cnt[APIC_CLUSTERID(id)]++; } /* Don't use clustered mode on AMD platforms. */ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) { genapic = &apic_physflat; -#ifndef CONFIG_CPU_HOTPLUG +#ifndef CONFIG_HOTPLUG_CPU /* In the CPU hotplug case we cannot use broadcast mode because that opens a race when a CPU is removed. Stay at physflat mode in this case. @@ -79,7 +80,7 @@ void __init clustered_apic_check(void) we have ACPI platform support for CPU hotplug we should detect hotplug capablity from ACPI tables and only do this when really needed. -AK */ - if (num_cpus <= 8) + if (max_apic <= 8) genapic = &apic_flat; #endif goto print; @@ -103,9 +104,14 @@ void __init clustered_apic_check(void) * (We don't use lowest priority delivery + HW APIC IRQ steering, so * can ignore the clustered logical case and go straight to physical.) */ - if (clusters <= 1 && max_cluster <= 8 && cluster_cnt[0] == max_cluster) + if (clusters <= 1 && max_cluster <= 8 && cluster_cnt[0] == max_cluster) { +#ifdef CONFIG_HOTPLUG_CPU + /* Don't use APIC shortcuts in CPU hotplug to avoid races */ + genapic = &apic_physflat; +#else genapic = &apic_flat; - else +#endif + } else genapic = &apic_cluster; print: diff --git a/arch/x86_64/kernel/genapic_cluster.c b/arch/x86_64/kernel/genapic_cluster.c index 9703da7202e3..a472d62f899a 100644 --- a/arch/x86_64/kernel/genapic_cluster.c +++ b/arch/x86_64/kernel/genapic_cluster.c @@ -51,10 +51,10 @@ static void cluster_init_apic_ldr(void) count = 3; id = my_cluster | (1UL << count); x86_cpu_to_log_apicid[smp_processor_id()] = id; - apic_write_around(APIC_DFR, APIC_DFR_CLUSTER); + apic_write(APIC_DFR, APIC_DFR_CLUSTER); val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; val |= SET_APIC_LOGICAL_ID(id); - apic_write_around(APIC_LDR, val); + apic_write(APIC_LDR, val); } /* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */ @@ -72,10 +72,14 @@ static void cluster_send_IPI_mask(cpumask_t mask, int vector) static void cluster_send_IPI_allbutself(int vector) { cpumask_t mask = cpu_online_map; - cpu_clear(smp_processor_id(), mask); + int me = get_cpu(); /* Ensure we are not preempted when we clear */ + + cpu_clear(me, mask); if (!cpus_empty(mask)) cluster_send_IPI_mask(mask, vector); + + put_cpu(); } static void cluster_send_IPI_all(int vector) diff --git a/arch/x86_64/kernel/genapic_flat.c b/arch/x86_64/kernel/genapic_flat.c index adc96282a9e2..9da3edb799ea 100644 --- a/arch/x86_64/kernel/genapic_flat.c +++ b/arch/x86_64/kernel/genapic_flat.c @@ -38,10 +38,10 @@ static void flat_init_apic_ldr(void) num = smp_processor_id(); id = 1UL << num; x86_cpu_to_log_apicid[num] = id; - apic_write_around(APIC_DFR, APIC_DFR_FLAT); + apic_write(APIC_DFR, APIC_DFR_FLAT); val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; val |= SET_APIC_LOGICAL_ID(id); - apic_write_around(APIC_LDR, val); + apic_write(APIC_LDR, val); } static void flat_send_IPI_mask(cpumask_t cpumask, int vector) @@ -62,7 +62,7 @@ static void flat_send_IPI_mask(cpumask_t cpumask, int vector) * prepare target chip field */ cfg = __prepare_ICR2(mask); - apic_write_around(APIC_ICR2, cfg); + apic_write(APIC_ICR2, cfg); /* * program the ICR @@ -72,14 +72,24 @@ static void flat_send_IPI_mask(cpumask_t cpumask, int vector) /* * Send the IPI. The write to APIC_ICR fires this off. */ - apic_write_around(APIC_ICR, cfg); + apic_write(APIC_ICR, cfg); local_irq_restore(flags); } static void flat_send_IPI_allbutself(int vector) { +#ifndef CONFIG_HOTPLUG_CPU if (((num_online_cpus()) - 1) >= 1) __send_IPI_shortcut(APIC_DEST_ALLBUT, vector,APIC_DEST_LOGICAL); +#else + cpumask_t allbutme = cpu_online_map; + int me = get_cpu(); /* Ensure we are not preempted when we clear */ + cpu_clear(me, allbutme); + + if (!cpus_empty(allbutme)) + flat_send_IPI_mask(allbutme, vector); + put_cpu(); +#endif } static void flat_send_IPI_all(int vector) @@ -167,9 +177,9 @@ static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask) struct genapic apic_physflat = { .name = "physical flat", - .int_delivery_mode = dest_LowestPrio, + .int_delivery_mode = dest_Fixed, .int_dest_mode = (APIC_DEST_PHYSICAL != 0), - .int_delivery_dest = APIC_DEST_PHYSICAL | APIC_DM_LOWEST, + .int_delivery_dest = APIC_DEST_PHYSICAL | APIC_DM_FIXED, .target_cpus = physflat_target_cpus, .apic_id_registered = flat_apic_id_registered, .init_apic_ldr = flat_init_apic_ldr,/*not needed, but shouldn't hurt*/ diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S index 98ff5eb32b9a..4592bf21fcaf 100644 --- a/arch/x86_64/kernel/head.S +++ b/arch/x86_64/kernel/head.S @@ -270,7 +270,7 @@ ENTRY(level3_kernel_pgt) .org 0x4000 ENTRY(level2_ident_pgt) /* 40MB for bootup. */ - .quad 0x0000000000000283 + .quad 0x0000000000000183 .quad 0x0000000000200183 .quad 0x0000000000400183 .quad 0x0000000000600183 diff --git a/arch/x86_64/kernel/i8259.c b/arch/x86_64/kernel/i8259.c index a89169095129..b2a238b5a17e 100644 --- a/arch/x86_64/kernel/i8259.c +++ b/arch/x86_64/kernel/i8259.c @@ -18,15 +18,12 @@ #include <asm/atomic.h> #include <asm/system.h> #include <asm/io.h> -#include <asm/irq.h> #include <asm/hw_irq.h> #include <asm/pgtable.h> #include <asm/delay.h> #include <asm/desc.h> #include <asm/apic.h> -#include <linux/irq.h> - /* * Common place to define all x86 IRQ vectors * @@ -486,7 +483,14 @@ void spurious_interrupt(void); void error_interrupt(void); void reschedule_interrupt(void); void call_function_interrupt(void); -void invalidate_interrupt(void); +void invalidate_interrupt0(void); +void invalidate_interrupt1(void); +void invalidate_interrupt2(void); +void invalidate_interrupt3(void); +void invalidate_interrupt4(void); +void invalidate_interrupt5(void); +void invalidate_interrupt6(void); +void invalidate_interrupt7(void); void thermal_interrupt(void); void i8254_timer_resume(void); @@ -562,8 +566,15 @@ void __init init_IRQ(void) */ set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - /* IPI for invalidation */ - set_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt); + /* IPIs for invalidation */ + set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); /* IPI for generic function call */ set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); diff --git a/arch/x86_64/kernel/init_task.c b/arch/x86_64/kernel/init_task.c index c4dc91491157..e0ba5c1043fd 100644 --- a/arch/x86_64/kernel/init_task.c +++ b/arch/x86_64/kernel/init_task.c @@ -44,6 +44,6 @@ EXPORT_SYMBOL(init_task); * section. Since TSS's are completely CPU-local, we want them * on exact cacheline boundaries, to eliminate cacheline ping-pong. */ -DEFINE_PER_CPU(struct tss_struct, init_tss) ____cacheline_maxaligned_in_smp; +DEFINE_PER_CPU(struct tss_struct, init_tss) ____cacheline_maxaligned_in_smp = INIT_TSS; #define ALIGN_TO_4K __attribute__((section(".data.init_task"))) diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index d206d7e49cf5..522944a000ad 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -21,7 +21,6 @@ */ #include <linux/mm.h> -#include <linux/irq.h> #include <linux/interrupt.h> #include <linux/init.h> #include <linux/delay.h> @@ -45,6 +44,8 @@ int sis_apic_bug; /* not actually supported, dummy for compile */ static int no_timer_check; +int disable_timer_pin_1 __initdata; + static DEFINE_SPINLOCK(ioapic_lock); /* @@ -70,7 +71,7 @@ static struct irq_pin_list { short apic, pin, next; } irq_2_pin[PIN_MAP_SIZE]; -int vector_irq[NR_VECTORS] = { [0 ... NR_VECTORS - 1] = -1}; +int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1}; #ifdef CONFIG_PCI_MSI #define vector_to_irq(vector) \ (platform_legacy_irq(vector) ? vector : vector_irq[vector]) @@ -78,6 +79,54 @@ int vector_irq[NR_VECTORS] = { [0 ... NR_VECTORS - 1] = -1}; #define vector_to_irq(vector) (vector) #endif +#define __DO_ACTION(R, ACTION, FINAL) \ + \ +{ \ + int pin; \ + struct irq_pin_list *entry = irq_2_pin + irq; \ + \ + for (;;) { \ + unsigned int reg; \ + pin = entry->pin; \ + if (pin == -1) \ + break; \ + reg = io_apic_read(entry->apic, 0x10 + R + pin*2); \ + reg ACTION; \ + io_apic_modify(entry->apic, reg); \ + if (!entry->next) \ + break; \ + entry = irq_2_pin + entry->next; \ + } \ + FINAL; \ +} + +#ifdef CONFIG_SMP +static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) +{ + unsigned long flags; + unsigned int dest; + cpumask_t tmp; + + cpus_and(tmp, mask, cpu_online_map); + if (cpus_empty(tmp)) + tmp = TARGET_CPUS; + + cpus_and(mask, tmp, CPU_MASK_ALL); + + dest = cpu_mask_to_apicid(mask); + + /* + * Only the high 8 bits are valid. + */ + dest = SET_APIC_LOGICAL_ID(dest); + + spin_lock_irqsave(&ioapic_lock, flags); + __DO_ACTION(1, = dest, ) + set_irq_info(irq, mask); + spin_unlock_irqrestore(&ioapic_lock, flags); +} +#endif + /* * The common case is 1:1 IRQ<->pin mappings. Sometimes there are * shared ISA-space IRQs, so we have to support them. We are super @@ -101,26 +150,6 @@ static void add_pin_to_irq(unsigned int irq, int apic, int pin) entry->pin = pin; } -#define __DO_ACTION(R, ACTION, FINAL) \ - \ -{ \ - int pin; \ - struct irq_pin_list *entry = irq_2_pin + irq; \ - \ - for (;;) { \ - unsigned int reg; \ - pin = entry->pin; \ - if (pin == -1) \ - break; \ - reg = io_apic_read(entry->apic, 0x10 + R + pin*2); \ - reg ACTION; \ - io_apic_modify(entry->apic, reg); \ - if (!entry->next) \ - break; \ - entry = irq_2_pin + entry->next; \ - } \ - FINAL; \ -} #define DO_ACTION(name,R,ACTION, FINAL) \ \ @@ -270,6 +299,15 @@ void __init check_ioapic(void) #endif /* RED-PEN skip them on mptables too? */ return; + case PCI_VENDOR_ID_ATI: + /* All timer interrupts on atiixp + are doubled. Disable one. */ + if (disable_timer_pin_1 == 0) { + disable_timer_pin_1 = 1; + printk(KERN_INFO + "ATI board detected. Disabling timer pin 1.\n"); + } + return; } /* No multi-function device? */ @@ -655,7 +693,7 @@ static inline int IO_APIC_irq_trigger(int irq) } /* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */ -u8 irq_vector[NR_IRQ_VECTORS] = { FIRST_DEVICE_VECTOR , 0 }; +u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 }; int assign_irq_vector(int irq) { @@ -767,6 +805,7 @@ static void __init setup_IO_APIC_irqs(void) spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); + set_native_irq_info(irq, TARGET_CPUS); spin_unlock_irqrestore(&ioapic_lock, flags); } } @@ -993,13 +1032,11 @@ void __apicdebuginit print_local_APIC(void * dummy) v = apic_read(APIC_TASKPRI); printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK); - if (APIC_INTEGRATED(ver)) { /* !82489DX */ - v = apic_read(APIC_ARBPRI); - printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v, - v & APIC_ARBPRI_MASK); - v = apic_read(APIC_PROCPRI); - printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v); - } + v = apic_read(APIC_ARBPRI); + printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v, + v & APIC_ARBPRI_MASK); + v = apic_read(APIC_PROCPRI); + printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v); v = apic_read(APIC_EOI); printk(KERN_DEBUG "... APIC EOI: %08x\n", v); @@ -1019,12 +1056,8 @@ void __apicdebuginit print_local_APIC(void * dummy) printk(KERN_DEBUG "... APIC IRR field:\n"); print_APIC_bitfield(APIC_IRR); - if (APIC_INTEGRATED(ver)) { /* !82489DX */ - if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ - apic_write(APIC_ESR, 0); - v = apic_read(APIC_ESR); - printk(KERN_DEBUG "... APIC ESR: %08x\n", v); - } + v = apic_read(APIC_ESR); + printk(KERN_DEBUG "... APIC ESR: %08x\n", v); v = apic_read(APIC_ICR); printk(KERN_DEBUG "... APIC ICR: %08x\n", v); @@ -1138,9 +1171,9 @@ void disable_IO_APIC(void) clear_IO_APIC(); /* - * If the i82559 is routed through an IOAPIC + * If the i8259 is routed through an IOAPIC * Put that IOAPIC in virtual wire mode - * so legacy interrups can be delivered. + * so legacy interrupts can be delivered. */ pin = find_isa_irq_pin(0, mp_ExtINT); if (pin != -1) { @@ -1314,6 +1347,7 @@ static unsigned int startup_edge_ioapic_irq(unsigned int irq) */ static void ack_edge_ioapic_irq(unsigned int irq) { + move_irq(irq); if ((irq_desc[irq].status & (IRQ_PENDING | IRQ_DISABLED)) == (IRQ_PENDING | IRQ_DISABLED)) mask_IO_APIC_irq(irq); @@ -1343,26 +1377,10 @@ static unsigned int startup_level_ioapic_irq (unsigned int irq) static void end_level_ioapic_irq (unsigned int irq) { + move_irq(irq); ack_APIC_irq(); } -static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) -{ - unsigned long flags; - unsigned int dest; - - dest = cpu_mask_to_apicid(mask); - - /* - * Only the high 8 bits are valid. - */ - dest = SET_APIC_LOGICAL_ID(dest); - - spin_lock_irqsave(&ioapic_lock, flags); - __DO_ACTION(1, = dest, ) - spin_unlock_irqrestore(&ioapic_lock, flags); -} - #ifdef CONFIG_PCI_MSI static unsigned int startup_edge_ioapic_vector(unsigned int vector) { @@ -1375,6 +1393,7 @@ static void ack_edge_ioapic_vector(unsigned int vector) { int irq = vector_to_irq(vector); + move_native_irq(vector); ack_edge_ioapic_irq(irq); } @@ -1389,6 +1408,7 @@ static void end_level_ioapic_vector (unsigned int vector) { int irq = vector_to_irq(vector); + move_native_irq(vector); end_level_ioapic_irq(irq); } @@ -1406,14 +1426,17 @@ static void unmask_IO_APIC_vector (unsigned int vector) unmask_IO_APIC_irq(irq); } +#ifdef CONFIG_SMP static void set_ioapic_affinity_vector (unsigned int vector, cpumask_t cpu_mask) { int irq = vector_to_irq(vector); + set_native_irq_info(vector, cpu_mask); set_ioapic_affinity_irq(irq, cpu_mask); } -#endif +#endif // CONFIG_SMP +#endif // CONFIG_PCI_MSI /* * Level and edge triggered IO-APIC interrupts need different handling, @@ -1424,7 +1447,7 @@ static void set_ioapic_affinity_vector (unsigned int vector, * races. */ -static struct hw_interrupt_type ioapic_edge_type = { +static struct hw_interrupt_type ioapic_edge_type __read_mostly = { .typename = "IO-APIC-edge", .startup = startup_edge_ioapic, .shutdown = shutdown_edge_ioapic, @@ -1432,10 +1455,12 @@ static struct hw_interrupt_type ioapic_edge_type = { .disable = disable_edge_ioapic, .ack = ack_edge_ioapic, .end = end_edge_ioapic, +#ifdef CONFIG_SMP .set_affinity = set_ioapic_affinity, +#endif }; -static struct hw_interrupt_type ioapic_level_type = { +static struct hw_interrupt_type ioapic_level_type __read_mostly = { .typename = "IO-APIC-level", .startup = startup_level_ioapic, .shutdown = shutdown_level_ioapic, @@ -1443,7 +1468,9 @@ static struct hw_interrupt_type ioapic_level_type = { .disable = disable_level_ioapic, .ack = mask_and_ack_level_ioapic, .end = end_level_ioapic, +#ifdef CONFIG_SMP .set_affinity = set_ioapic_affinity, +#endif }; static inline void init_IO_APIC_traps(void) @@ -1506,7 +1533,7 @@ static void ack_lapic_irq (unsigned int irq) static void end_lapic_irq (unsigned int i) { /* nothing */ } -static struct hw_interrupt_type lapic_irq_type = { +static struct hw_interrupt_type lapic_irq_type __read_mostly = { .typename = "local-APIC-edge", .startup = NULL, /* startup_irq() not used for IRQ0 */ .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */ @@ -1642,6 +1669,8 @@ static inline void check_timer(void) setup_nmi(); enable_8259A_irq(0); } + if (disable_timer_pin_1 > 0) + clear_IO_APIC_pin(0, pin1); return; } clear_IO_APIC_pin(0, pin1); @@ -1841,7 +1870,7 @@ device_initcall(ioapic_init_sysfs); ACPI-based IOAPIC Configuration -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI #define IO_APIC_MAX_ID 0xFE @@ -1918,12 +1947,13 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1)); io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0)); + set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS); spin_unlock_irqrestore(&ioapic_lock, flags); return 0; } -#endif /*CONFIG_ACPI_BOOT*/ +#endif /* CONFIG_ACPI */ /* @@ -1931,6 +1961,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a * we need to reprogram the ioredtbls to cater for the cpus which have come online * so mask in all cases should simply be TARGET_CPUS */ +#ifdef CONFIG_SMP void __init setup_ioapic_dest(void) { int pin, ioapic, irq, irq_entry; @@ -1949,3 +1980,4 @@ void __init setup_ioapic_dest(void) } } +#endif diff --git a/arch/x86_64/kernel/irq.c b/arch/x86_64/kernel/irq.c index 849a20aec7ca..d6a04a8320a3 100644 --- a/arch/x86_64/kernel/irq.c +++ b/arch/x86_64/kernel/irq.c @@ -99,7 +99,6 @@ asmlinkage unsigned int do_IRQ(struct pt_regs *regs) unsigned irq = regs->orig_rax & 0xff; irq_enter(); - BUG_ON(irq > 256); __do_IRQ(irq, regs); irq_exit(); diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c index 5c6dc7051482..df08c43276a0 100644 --- a/arch/x86_64/kernel/kprobes.c +++ b/arch/x86_64/kernel/kprobes.c @@ -74,7 +74,7 @@ static inline int is_IF_modifier(kprobe_opcode_t *insn) return 0; } -int arch_prepare_kprobe(struct kprobe *p) +int __kprobes arch_prepare_kprobe(struct kprobe *p) { /* insn: must be on special executable page on x86_64. */ up(&kprobe_mutex); @@ -189,7 +189,7 @@ static inline s32 *is_riprel(u8 *insn) return NULL; } -void arch_copy_kprobe(struct kprobe *p) +void __kprobes arch_copy_kprobe(struct kprobe *p) { s32 *ripdisp; memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE); @@ -215,21 +215,21 @@ void arch_copy_kprobe(struct kprobe *p) p->opcode = *p->addr; } -void arch_arm_kprobe(struct kprobe *p) +void __kprobes arch_arm_kprobe(struct kprobe *p) { *p->addr = BREAKPOINT_INSTRUCTION; flush_icache_range((unsigned long) p->addr, (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } -void arch_disarm_kprobe(struct kprobe *p) +void __kprobes arch_disarm_kprobe(struct kprobe *p) { *p->addr = p->opcode; flush_icache_range((unsigned long) p->addr, (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } -void arch_remove_kprobe(struct kprobe *p) +void __kprobes arch_remove_kprobe(struct kprobe *p) { up(&kprobe_mutex); free_insn_slot(p->ainsn.insn); @@ -261,7 +261,7 @@ static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs) kprobe_saved_rflags &= ~IF_MASK; } -static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) +static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) { regs->eflags |= TF_MASK; regs->eflags &= ~IF_MASK; @@ -272,7 +272,8 @@ static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->rip = (unsigned long)p->ainsn.insn; } -void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) +void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, + struct pt_regs *regs) { unsigned long *sara = (unsigned long *)regs->rsp; struct kretprobe_instance *ri; @@ -295,7 +296,7 @@ void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) * Interrupts are disabled on entry as trap3 is an interrupt gate and they * remain disabled thorough out this function. */ -int kprobe_handler(struct pt_regs *regs) +int __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p; int ret = 0; @@ -310,7 +311,8 @@ int kprobe_handler(struct pt_regs *regs) Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS) { + if (kprobe_status == KPROBE_HIT_SS && + *p->ainsn.insn == BREAKPOINT_INSTRUCTION) { regs->eflags &= ~TF_MASK; regs->eflags |= kprobe_saved_rflags; unlock_kprobes(); @@ -360,7 +362,10 @@ int kprobe_handler(struct pt_regs *regs) * either a probepoint or a debugger breakpoint * at this address. In either case, no further * handling of this interrupt is appropriate. + * Back up over the (now missing) int3 and run + * the original instruction. */ + regs->rip = (unsigned long)addr; ret = 1; } /* Not one of ours: let kernel handle it */ @@ -399,7 +404,7 @@ no_kprobe: /* * Called when we hit the probe point at kretprobe_trampoline */ -int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) { struct kretprobe_instance *ri = NULL; struct hlist_head *head; @@ -478,7 +483,7 @@ int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * that is atop the stack is the address following the copied instruction. * We need to make it the address following the original instruction. */ -static void resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) { unsigned long *tos = (unsigned long *)regs->rsp; unsigned long next_rip = 0; @@ -536,7 +541,7 @@ static void resume_execution(struct kprobe *p, struct pt_regs *regs) * Interrupts are disabled on entry as trap1 is an interrupt gate and they * remain disabled thoroughout this function. And we hold kprobe lock. */ -int post_kprobe_handler(struct pt_regs *regs) +int __kprobes post_kprobe_handler(struct pt_regs *regs) { if (!kprobe_running()) return 0; @@ -571,7 +576,7 @@ out: } /* Interrupts disabled, kprobe_lock held. */ -int kprobe_fault_handler(struct pt_regs *regs, int trapnr) +int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) { if (current_kprobe->fault_handler && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) @@ -590,8 +595,8 @@ int kprobe_fault_handler(struct pt_regs *regs, int trapnr) /* * Wrapper routine for handling exceptions. */ -int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, - void *data) +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; switch (val) { @@ -619,7 +624,7 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, return NOTIFY_DONE; } -int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr; @@ -640,7 +645,7 @@ int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) return 1; } -void jprobe_return(void) +void __kprobes jprobe_return(void) { preempt_enable_no_resched(); asm volatile (" xchg %%rbx,%%rsp \n" @@ -651,7 +656,7 @@ void jprobe_return(void) (jprobe_saved_rsp):"memory"); } -int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { u8 *addr = (u8 *) (regs->rip - 1); unsigned long stack_addr = (unsigned long)jprobe_saved_rsp; diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c index 8aa56736cde3..08203b07f4bd 100644 --- a/arch/x86_64/kernel/mce.c +++ b/arch/x86_64/kernel/mce.c @@ -17,6 +17,7 @@ #include <linux/fs.h> #include <linux/cpu.h> #include <linux/percpu.h> +#include <linux/ctype.h> #include <asm/processor.h> #include <asm/msr.h> #include <asm/mce.h> @@ -56,15 +57,19 @@ void mce_log(struct mce *mce) smp_wmb(); for (;;) { entry = rcu_dereference(mcelog.next); - /* When the buffer fills up discard new entries. Assume - that the earlier errors are the more interesting. */ - if (entry >= MCE_LOG_LEN) { - set_bit(MCE_OVERFLOW, &mcelog.flags); - return; + for (;;) { + /* When the buffer fills up discard new entries. Assume + that the earlier errors are the more interesting. */ + if (entry >= MCE_LOG_LEN) { + set_bit(MCE_OVERFLOW, &mcelog.flags); + return; + } + /* Old left over entry. Skip. */ + if (mcelog.entry[entry].finished) { + entry++; + continue; + } } - /* Old left over entry. Skip. */ - if (mcelog.entry[entry].finished) - continue; smp_rmb(); next = entry + 1; if (cmpxchg(&mcelog.next, entry, next) == entry) @@ -212,7 +217,7 @@ void do_machine_check(struct pt_regs * regs, long error_code) panicm_found = 1; } - tainted |= TAINT_MACHINE_CHECK; + add_taint(TAINT_MACHINE_CHECK); } /* Never do anything final in the polling timer */ @@ -404,9 +409,15 @@ static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize, loff } err = 0; - for (i = 0; i < next; i++) { - if (!mcelog.entry[i].finished) - continue; + for (i = 0; i < next; i++) { + unsigned long start = jiffies; + while (!mcelog.entry[i].finished) { + if (!time_before(jiffies, start + 2)) { + memset(mcelog.entry + i,0, sizeof(struct mce)); + continue; + } + cpu_relax(); + } smp_rmb(); err |= copy_to_user(buf, mcelog.entry + i, sizeof(struct mce)); buf += sizeof(struct mce); @@ -479,6 +490,7 @@ static int __init mcheck_disable(char *str) /* mce=off disables machine check. Note you can reenable it later using sysfs. + mce=TOLERANCELEVEL (number, see above) mce=bootlog Log MCEs from before booting. Disabled by default to work around buggy BIOS that leave bogus MCEs. */ static int __init mcheck_enable(char *str) @@ -489,6 +501,8 @@ static int __init mcheck_enable(char *str) mce_dont_init = 1; else if (!strcmp(str, "bootlog")) mce_bootlog = 1; + else if (isdigit(str[0])) + get_option(&str, &tolerant); else printk("mce= argument %s ignored. Please use /sys", str); return 0; @@ -501,10 +515,12 @@ __setup("mce", mcheck_enable); * Sysfs support */ -/* On resume clear all MCE state. Don't want to see leftovers from the BIOS. */ +/* On resume clear all MCE state. Don't want to see leftovers from the BIOS. + Only one CPU is active at this time, the others get readded later using + CPU hotplug. */ static int mce_resume(struct sys_device *dev) { - on_each_cpu(mce_init, NULL, 1, 1); + mce_init(NULL); return 0; } diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index 79c362d03e2e..f16d38d09daf 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -14,7 +14,6 @@ */ #include <linux/mm.h> -#include <linux/irq.h> #include <linux/init.h> #include <linux/delay.h> #include <linux/config.h> @@ -46,8 +45,6 @@ int acpi_found_madt; int apic_version [MAX_APICS]; unsigned char mp_bus_id_to_type [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; -unsigned char pci_bus_to_node [256]; -EXPORT_SYMBOL(pci_bus_to_node); static int mp_current_pci_id = 0; /* I/O APIC entries */ @@ -74,7 +71,7 @@ static unsigned int num_processors = 0; physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE; /* ACPI MADT entry parsing functions */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI extern struct acpi_boot_flags acpi_boot; #ifdef CONFIG_X86_LOCAL_APIC extern int acpi_parse_lapic (acpi_table_entry_header *header); @@ -84,7 +81,7 @@ extern int acpi_parse_lapic_nmi (acpi_table_entry_header *header); #ifdef CONFIG_X86_IO_APIC extern int acpi_parse_ioapic (acpi_table_entry_header *header); #endif /*CONFIG_X86_IO_APIC*/ -#endif /*CONFIG_ACPI_BOOT*/ +#endif /*CONFIG_ACPI*/ u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; @@ -519,8 +516,6 @@ void __init get_smp_config (void) struct intel_mp_floating *mpf = mpf_found; /* - * ACPI may be used to obtain the entire SMP configuration or just to - * enumerate/configure processors (CONFIG_ACPI_BOOT). Note that * ACPI supports both logical (e.g. Hyper-Threading) and physical * processors, where MPS only supports physical. */ @@ -673,7 +668,7 @@ void __init find_smp_config (void) ACPI-based MP Configuration -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI void __init mp_register_lapic_address ( u64 address) @@ -707,7 +702,7 @@ void __init mp_register_lapic ( processor.mpc_type = MP_PROCESSOR; processor.mpc_apicid = id; - processor.mpc_apicver = 0x10; /* TBD: lapic version */ + processor.mpc_apicver = GET_APIC_VERSION(apic_read(APIC_LVR)); processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0); processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0); processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | @@ -929,11 +924,9 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low) if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) return gsi; -#ifdef CONFIG_ACPI_BUS /* Don't set up the ACPI SCI because it's already set up */ if (acpi_fadt.sci_int == gsi) return gsi; -#endif ioapic = mp_find_ioapic(gsi); if (ioapic < 0) { @@ -973,13 +966,11 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low) if (gsi < MAX_GSI_NUM) { if (gsi > 15) gsi = pci_irq++; -#ifdef CONFIG_ACPI_BUS /* * Don't assign IRQ used by ACPI SCI */ if (gsi == acpi_fadt.sci_int) gsi = pci_irq++; -#endif gsi_to_irq[irq] = gsi; } else { printk(KERN_ERR "GSI %u is too high\n", gsi); @@ -994,4 +985,4 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low) } #endif /*CONFIG_X86_IO_APIC*/ -#endif /*CONFIG_ACPI_BOOT*/ +#endif /*CONFIG_ACPI*/ diff --git a/arch/x86_64/kernel/msr.c b/arch/x86_64/kernel/msr.c deleted file mode 100644 index 598953ab0154..000000000000 --- a/arch/x86_64/kernel/msr.c +++ /dev/null @@ -1,279 +0,0 @@ -/* ----------------------------------------------------------------------- * - * - * Copyright 2000 H. Peter Anvin - All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139, - * USA; either version 2 of the License, or (at your option) any later - * version; incorporated herein by reference. - * - * ----------------------------------------------------------------------- */ - -/* - * msr.c - * - * x86 MSR access device - * - * This device is accessed by lseek() to the appropriate register number - * and then read/write in chunks of 8 bytes. A larger size means multiple - * reads or writes of the same register. - * - * This driver uses /dev/cpu/%d/msr where %d is the minor number, and on - * an SMP box will direct the access to CPU %d. - */ - -#include <linux/module.h> -#include <linux/config.h> - -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/fcntl.h> -#include <linux/init.h> -#include <linux/poll.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/major.h> -#include <linux/fs.h> - -#include <asm/processor.h> -#include <asm/msr.h> -#include <asm/uaccess.h> -#include <asm/system.h> - -/* Note: "err" is handled in a funny way below. Otherwise one version - of gcc or another breaks. */ - -static inline int wrmsr_eio(u32 reg, u32 eax, u32 edx) -{ - int err; - - asm volatile ("1: wrmsr\n" - "2:\n" - ".section .fixup,\"ax\"\n" - "3: movl %4,%0\n" - " jmp 2b\n" - ".previous\n" - ".section __ex_table,\"a\"\n" - " .align 8\n" " .quad 1b,3b\n" ".previous":"=&bDS" (err) - :"a"(eax), "d"(edx), "c"(reg), "i"(-EIO), "0"(0)); - - return err; -} - -static inline int rdmsr_eio(u32 reg, u32 *eax, u32 *edx) -{ - int err; - - asm volatile ("1: rdmsr\n" - "2:\n" - ".section .fixup,\"ax\"\n" - "3: movl %4,%0\n" - " jmp 2b\n" - ".previous\n" - ".section __ex_table,\"a\"\n" - " .align 8\n" - " .quad 1b,3b\n" - ".previous":"=&bDS" (err), "=a"(*eax), "=d"(*edx) - :"c"(reg), "i"(-EIO), "0"(0)); - - return err; -} - -#ifdef CONFIG_SMP - -struct msr_command { - int cpu; - int err; - u32 reg; - u32 data[2]; -}; - -static void msr_smp_wrmsr(void *cmd_block) -{ - struct msr_command *cmd = (struct msr_command *)cmd_block; - - if (cmd->cpu == smp_processor_id()) - cmd->err = wrmsr_eio(cmd->reg, cmd->data[0], cmd->data[1]); -} - -static void msr_smp_rdmsr(void *cmd_block) -{ - struct msr_command *cmd = (struct msr_command *)cmd_block; - - if (cmd->cpu == smp_processor_id()) - cmd->err = rdmsr_eio(cmd->reg, &cmd->data[0], &cmd->data[1]); -} - -static inline int do_wrmsr(int cpu, u32 reg, u32 eax, u32 edx) -{ - struct msr_command cmd; - int ret; - - preempt_disable(); - if (cpu == smp_processor_id()) { - ret = wrmsr_eio(reg, eax, edx); - } else { - cmd.cpu = cpu; - cmd.reg = reg; - cmd.data[0] = eax; - cmd.data[1] = edx; - - smp_call_function(msr_smp_wrmsr, &cmd, 1, 1); - ret = cmd.err; - } - preempt_enable(); - return ret; -} - -static inline int do_rdmsr(int cpu, u32 reg, u32 * eax, u32 * edx) -{ - struct msr_command cmd; - int ret; - - preempt_disable(); - if (cpu == smp_processor_id()) { - ret = rdmsr_eio(reg, eax, edx); - } else { - cmd.cpu = cpu; - cmd.reg = reg; - - smp_call_function(msr_smp_rdmsr, &cmd, 1, 1); - - *eax = cmd.data[0]; - *edx = cmd.data[1]; - - ret = cmd.err; - } - preempt_enable(); - return ret; -} - -#else /* ! CONFIG_SMP */ - -static inline int do_wrmsr(int cpu, u32 reg, u32 eax, u32 edx) -{ - return wrmsr_eio(reg, eax, edx); -} - -static inline int do_rdmsr(int cpu, u32 reg, u32 *eax, u32 *edx) -{ - return rdmsr_eio(reg, eax, edx); -} - -#endif /* ! CONFIG_SMP */ - -static loff_t msr_seek(struct file *file, loff_t offset, int orig) -{ - loff_t ret = -EINVAL; - - lock_kernel(); - switch (orig) { - case 0: - file->f_pos = offset; - ret = file->f_pos; - break; - case 1: - file->f_pos += offset; - ret = file->f_pos; - } - unlock_kernel(); - return ret; -} - -static ssize_t msr_read(struct file *file, char __user * buf, - size_t count, loff_t * ppos) -{ - u32 __user *tmp = (u32 __user *) buf; - u32 data[2]; - size_t rv; - u32 reg = *ppos; - int cpu = iminor(file->f_dentry->d_inode); - int err; - - if (count % 8) - return -EINVAL; /* Invalid chunk size */ - - for (rv = 0; count; count -= 8) { - err = do_rdmsr(cpu, reg, &data[0], &data[1]); - if (err) - return err; - if (copy_to_user(tmp, &data, 8)) - return -EFAULT; - tmp += 2; - } - - return ((char __user *)tmp) - buf; -} - -static ssize_t msr_write(struct file *file, const char __user *buf, - size_t count, loff_t *ppos) -{ - const u32 __user *tmp = (const u32 __user *)buf; - u32 data[2]; - size_t rv; - u32 reg = *ppos; - int cpu = iminor(file->f_dentry->d_inode); - int err; - - if (count % 8) - return -EINVAL; /* Invalid chunk size */ - - for (rv = 0; count; count -= 8) { - if (copy_from_user(&data, tmp, 8)) - return -EFAULT; - err = do_wrmsr(cpu, reg, data[0], data[1]); - if (err) - return err; - tmp += 2; - } - - return ((char __user *)tmp) - buf; -} - -static int msr_open(struct inode *inode, struct file *file) -{ - unsigned int cpu = iminor(file->f_dentry->d_inode); - struct cpuinfo_x86 *c = &(cpu_data)[cpu]; - - if (cpu >= NR_CPUS || !cpu_online(cpu)) - return -ENXIO; /* No such CPU */ - if (!cpu_has(c, X86_FEATURE_MSR)) - return -EIO; /* MSR not supported */ - - return 0; -} - -/* - * File operations we support - */ -static struct file_operations msr_fops = { - .owner = THIS_MODULE, - .llseek = msr_seek, - .read = msr_read, - .write = msr_write, - .open = msr_open, -}; - -static int __init msr_init(void) -{ - if (register_chrdev(MSR_MAJOR, "cpu/msr", &msr_fops)) { - printk(KERN_ERR "msr: unable to get major %d for msr\n", - MSR_MAJOR); - return -EBUSY; - } - - return 0; -} - -static void __exit msr_exit(void) -{ - unregister_chrdev(MSR_MAJOR, "cpu/msr"); -} - -module_init(msr_init); -module_exit(msr_exit) - -MODULE_AUTHOR("H. Peter Anvin <hpa@zytor.com>"); -MODULE_DESCRIPTION("x86 generic MSR driver"); -MODULE_LICENSE("GPL"); diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 4e44d6e6b7e5..39d445e16f22 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -14,7 +14,6 @@ #include <linux/config.h> #include <linux/mm.h> -#include <linux/irq.h> #include <linux/delay.h> #include <linux/bootmem.h> #include <linux/smp_lock.h> @@ -290,7 +289,7 @@ void enable_timer_nmi_watchdog(void) static int nmi_pm_active; /* nmi_active before suspend */ -static int lapic_nmi_suspend(struct sys_device *dev, u32 state) +static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) { nmi_pm_active = nmi_active; disable_lapic_nmi_watchdog(); @@ -367,7 +366,7 @@ static void setup_k7_watchdog(void) | K7_NMI_EVENT; wrmsr(MSR_K7_EVNTSEL0, evntsel, 0); - wrmsr(MSR_K7_PERFCTR0, -(cpu_khz/nmi_hz*1000), -1); + wrmsrl(MSR_K7_PERFCTR0, -((u64)cpu_khz * 1000 / nmi_hz)); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= K7_EVNTSEL_ENABLE; wrmsr(MSR_K7_EVNTSEL0, evntsel, 0); @@ -408,8 +407,8 @@ static int setup_p4_watchdog(void) wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0); wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0); - Dprintk("setting P4_IQ_COUNTER0 to 0x%08lx\n", -(cpu_khz/nmi_hz*1000)); - wrmsr(MSR_P4_IQ_COUNTER0, -(cpu_khz/nmi_hz*1000), -1); + Dprintk("setting P4_IQ_COUNTER0 to 0x%08lx\n", -(cpu_khz * 1000UL / nmi_hz)); + wrmsrl(MSR_P4_IQ_COUNTER0, -((u64)cpu_khz * 1000 / nmi_hz)); apic_write(APIC_LVTPC, APIC_DM_NMI); wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0); return 1; @@ -463,6 +462,8 @@ void touch_nmi_watchdog (void) */ for (i = 0; i < NR_CPUS; i++) per_cpu(nmi_touch, i) = 1; + + touch_softlockup_watchdog(); } void nmi_watchdog_tick (struct pt_regs * regs, unsigned reason) @@ -486,8 +487,8 @@ void nmi_watchdog_tick (struct pt_regs * regs, unsigned reason) == NOTIFY_STOP) { local_set(&__get_cpu_var(alert_counter), 0); return; - } - die_nmi("NMI Watchdog detected LOCKUP on CPU%d", regs); + } + die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs); } } else { __get_cpu_var(last_irq_sum) = sum; @@ -505,7 +506,7 @@ void nmi_watchdog_tick (struct pt_regs * regs, unsigned reason) wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0); apic_write(APIC_LVTPC, APIC_DM_NMI); } - wrmsr(nmi_perfctr_msr, -(cpu_khz/nmi_hz*1000), -1); + wrmsrl(nmi_perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); } } @@ -522,14 +523,14 @@ asmlinkage void do_nmi(struct pt_regs * regs, long error_code) nmi_enter(); add_pda(__nmi_count,1); - if (!nmi_callback(regs, cpu)) + if (!rcu_dereference(nmi_callback)(regs, cpu)) default_do_nmi(regs); nmi_exit(); } void set_nmi_callback(nmi_callback_t callback) { - nmi_callback = callback; + rcu_assign_pointer(nmi_callback, callback); } void unset_nmi_callback(void) diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c index 57f35c68aa34..cf0a0315d586 100644 --- a/arch/x86_64/kernel/pci-gart.c +++ b/arch/x86_64/kernel/pci-gart.c @@ -191,11 +191,9 @@ static void *dma_alloc_pages(struct device *dev, unsigned gfp, unsigned order) { struct page *page; int node; - if (dev->bus == &pci_bus_type) { - cpumask_t mask; - mask = pcibus_to_cpumask(to_pci_dev(dev)->bus); - node = cpu_to_node(first_cpu(mask)); - } else + if (dev->bus == &pci_bus_type) + node = pcibus_to_node(to_pci_dev(dev)->bus); + else node = numa_node_id(); page = alloc_pages_node(node, gfp, order); return page ? page_address(page) : NULL; diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index 7577f9d7a75d..b5a89c0bdf59 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -32,7 +32,6 @@ #include <linux/a.out.h> #include <linux/interrupt.h> #include <linux/delay.h> -#include <linux/irq.h> #include <linux/ptrace.h> #include <linux/utsname.h> #include <linux/random.h> @@ -123,6 +122,7 @@ static void poll_idle (void) : : "i" (_TIF_NEED_RESCHED), "m" (current_thread_info()->flags)); + clear_thread_flag(TIF_POLLING_NRFLAG); } else { set_need_resched(); } @@ -271,8 +271,11 @@ void __show_regs(struct pt_regs * regs) printk("\n"); print_modules(); - printk("Pid: %d, comm: %.20s %s %s\n", - current->pid, current->comm, print_tainted(), system_utsname.release); + printk("Pid: %d, comm: %.20s %s %s %.*s\n", + current->pid, current->comm, print_tainted(), + system_utsname.release, + (int)strcspn(system_utsname.version, " "), + system_utsname.version); printk("RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->rip); printk_address(regs->rip); printk("\nRSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, regs->rsp, regs->eflags); @@ -310,6 +313,7 @@ void __show_regs(struct pt_regs * regs) void show_regs(struct pt_regs *regs) { + printk("CPU %d:", smp_processor_id()); __show_regs(regs); show_trace(®s->rsp); } @@ -482,33 +486,6 @@ out: } /* - * This function selects if the context switch from prev to next - * has to tweak the TSC disable bit in the cr4. - */ -static inline void disable_tsc(struct task_struct *prev_p, - struct task_struct *next_p) -{ - struct thread_info *prev, *next; - - /* - * gcc should eliminate the ->thread_info dereference if - * has_secure_computing returns 0 at compile time (SECCOMP=n). - */ - prev = prev_p->thread_info; - next = next_p->thread_info; - - if (has_secure_computing(prev) || has_secure_computing(next)) { - /* slow path here */ - if (has_secure_computing(prev) && - !has_secure_computing(next)) { - write_cr4(read_cr4() & ~X86_CR4_TSD); - } else if (!has_secure_computing(prev) && - has_secure_computing(next)) - write_cr4(read_cr4() | X86_CR4_TSD); - } -} - -/* * This special macro can be used to load a debugging register */ #define loaddebug(thread,r) set_debug(thread->debugreg ## r, r) @@ -626,8 +603,6 @@ struct task_struct *__switch_to(struct task_struct *prev_p, struct task_struct * } } - disable_tsc(prev_p, next_p); - return prev_p; } diff --git a/arch/x86_64/kernel/semaphore.c b/arch/x86_64/kernel/semaphore.c deleted file mode 100644 index 48f7c18172b9..000000000000 --- a/arch/x86_64/kernel/semaphore.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * x86_64 semaphore implementation. - * - * (C) Copyright 1999 Linus Torvalds - * - * Portions Copyright 1999 Red Hat, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * rw semaphores implemented November 1999 by Benjamin LaHaise <bcrl@kvack.org> - */ -#include <linux/config.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <asm/errno.h> - -#include <asm/semaphore.h> - -/* - * Semaphores are implemented using a two-way counter: - * The "count" variable is decremented for each process - * that tries to acquire the semaphore, while the "sleeping" - * variable is a count of such acquires. - * - * Notably, the inline "up()" and "down()" functions can - * efficiently test if they need to do any extra work (up - * needs to do something only if count was negative before - * the increment operation. - * - * "sleeping" and the contention routine ordering is protected - * by the spinlock in the semaphore's waitqueue head. - * - * Note that these functions are only called when there is - * contention on the lock, and as such all this is the - * "non-critical" part of the whole semaphore business. The - * critical part is the inline stuff in <asm/semaphore.h> - * where we want to avoid any extra jumps and calls. - */ - -/* - * Logic: - * - only on a boundary condition do we need to care. When we go - * from a negative count to a non-negative, we wake people up. - * - when we go from a non-negative count to a negative do we - * (a) synchronize with the "sleeper" count and (b) make sure - * that we're on the wakeup list before we synchronize so that - * we cannot lose wakeup events. - */ - -void __up(struct semaphore *sem) -{ - wake_up(&sem->wait); -} - -void __sched __down(struct semaphore * sem) -{ - struct task_struct *tsk = current; - DECLARE_WAITQUEUE(wait, tsk); - unsigned long flags; - - tsk->state = TASK_UNINTERRUPTIBLE; - spin_lock_irqsave(&sem->wait.lock, flags); - add_wait_queue_exclusive_locked(&sem->wait, &wait); - - sem->sleepers++; - for (;;) { - int sleepers = sem->sleepers; - - /* - * Add "everybody else" into it. They aren't - * playing, because we own the spinlock in - * the wait_queue_head. - */ - if (!atomic_add_negative(sleepers - 1, &sem->count)) { - sem->sleepers = 0; - break; - } - sem->sleepers = 1; /* us - see -1 above */ - spin_unlock_irqrestore(&sem->wait.lock, flags); - - schedule(); - - spin_lock_irqsave(&sem->wait.lock, flags); - tsk->state = TASK_UNINTERRUPTIBLE; - } - remove_wait_queue_locked(&sem->wait, &wait); - wake_up_locked(&sem->wait); - spin_unlock_irqrestore(&sem->wait.lock, flags); - tsk->state = TASK_RUNNING; -} - -int __sched __down_interruptible(struct semaphore * sem) -{ - int retval = 0; - struct task_struct *tsk = current; - DECLARE_WAITQUEUE(wait, tsk); - unsigned long flags; - - tsk->state = TASK_INTERRUPTIBLE; - spin_lock_irqsave(&sem->wait.lock, flags); - add_wait_queue_exclusive_locked(&sem->wait, &wait); - - sem->sleepers++; - for (;;) { - int sleepers = sem->sleepers; - - /* - * With signals pending, this turns into - * the trylock failure case - we won't be - * sleeping, and we* can't get the lock as - * it has contention. Just correct the count - * and exit. - */ - if (signal_pending(current)) { - retval = -EINTR; - sem->sleepers = 0; - atomic_add(sleepers, &sem->count); - break; - } - - /* - * Add "everybody else" into it. They aren't - * playing, because we own the spinlock in - * wait_queue_head. The "-1" is because we're - * still hoping to get the semaphore. - */ - if (!atomic_add_negative(sleepers - 1, &sem->count)) { - sem->sleepers = 0; - break; - } - sem->sleepers = 1; /* us - see -1 above */ - spin_unlock_irqrestore(&sem->wait.lock, flags); - - schedule(); - - spin_lock_irqsave(&sem->wait.lock, flags); - tsk->state = TASK_INTERRUPTIBLE; - } - remove_wait_queue_locked(&sem->wait, &wait); - wake_up_locked(&sem->wait); - spin_unlock_irqrestore(&sem->wait.lock, flags); - - tsk->state = TASK_RUNNING; - return retval; -} - -/* - * Trylock failed - make sure we correct for - * having decremented the count. - * - * We could have done the trylock with a - * single "cmpxchg" without failure cases, - * but then it wouldn't work on a 386. - */ -int __down_trylock(struct semaphore * sem) -{ - int sleepers; - unsigned long flags; - - spin_lock_irqsave(&sem->wait.lock, flags); - sleepers = sem->sleepers + 1; - sem->sleepers = 0; - - /* - * Add "everybody else" and us into it. They aren't - * playing, because we own the spinlock in the - * wait_queue_head. - */ - if (!atomic_add_negative(sleepers, &sem->count)) { - wake_up_locked(&sem->wait); - } - - spin_unlock_irqrestore(&sem->wait.lock, flags); - return 1; -} - - diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 116a491e2961..351d8d64c2fb 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -65,13 +65,13 @@ * Machine setup.. */ -struct cpuinfo_x86 boot_cpu_data; +struct cpuinfo_x86 boot_cpu_data __read_mostly; unsigned long mmu_cr4_features; int acpi_disabled; EXPORT_SYMBOL(acpi_disabled); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI extern int __initdata acpi_ht; extern acpi_interrupt_flags acpi_sci_flags; int __initdata acpi_force = 0; @@ -294,7 +294,7 @@ static __init void parse_cmdline_early (char ** cmdline_p) maxcpus = simple_strtoul(from + 8, NULL, 0); } #endif -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* "acpi=off" disables both ACPI table parsing and interpreter init */ if (!memcmp(from, "acpi=off", 8)) disable_acpi(); @@ -336,6 +336,11 @@ static __init void parse_cmdline_early (char ** cmdline_p) #endif #endif + if (!memcmp(from, "disable_timer_pin_1", 19)) + disable_timer_pin_1 = 1; + if (!memcmp(from, "enable_timer_pin_1", 18)) + disable_timer_pin_1 = -1; + if (!memcmp(from, "nolapic", 7) || !memcmp(from, "disableapic", 11)) disable_apic = 1; @@ -566,7 +571,7 @@ void __init setup_arch(char **cmdline_p) init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT)); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* * Initialize the ACPI boot-time table parser (gets the RSDP and SDT). * Call this early for SRAT node setup. @@ -658,7 +663,7 @@ void __init setup_arch(char **cmdline_p) check_ioapic(); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* * Read APIC and some other early information from ACPI tables. */ @@ -755,6 +760,24 @@ static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) } } +#ifdef CONFIG_NUMA +static int nearby_node(int apicid) +{ + int i; + for (i = apicid - 1; i >= 0; i--) { + int node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { + int node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + return first_node(node_online_map); /* Shouldn't happen */ +} +#endif + /* * On a AMD dual core setup the lower bits of the APIC id distingush the cores. * Assumes number of cores is a power of two. @@ -763,8 +786,11 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) { #ifdef CONFIG_SMP int cpu = smp_processor_id(); - int node = 0; unsigned bits; +#ifdef CONFIG_NUMA + int node = 0; + unsigned apicid = phys_proc_id[cpu]; +#endif bits = 0; while ((1 << bits) < c->x86_num_cores) @@ -776,20 +802,32 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) phys_proc_id[cpu] >>= bits; #ifdef CONFIG_NUMA - /* When an ACPI SRAT table is available use the mappings from SRAT - instead. */ - if (acpi_numa <= 0) { - node = phys_proc_id[cpu]; - if (!node_online(node)) - node = first_node(node_online_map); - cpu_to_node[cpu] = node; - } else { - node = cpu_to_node[cpu]; - } + node = phys_proc_id[cpu]; + if (apicid_to_node[apicid] != NUMA_NO_NODE) + node = apicid_to_node[apicid]; + if (!node_online(node)) { + /* Two possibilities here: + - The CPU is missing memory and no node was created. + In that case try picking one from a nearby CPU + - The APIC IDs differ from the HyperTransport node IDs + which the K8 northbridge parsing fills in. + Assume they are all increased by a constant offset, + but in the same order as the HT nodeids. + If that doesn't result in a usable node fall back to the + path for the previous case. */ + int ht_nodeid = apicid - (phys_proc_id[0] << bits); + if (ht_nodeid >= 0 && + apicid_to_node[ht_nodeid] != NUMA_NO_NODE) + node = apicid_to_node[ht_nodeid]; + /* Pick a nearby node */ + if (!node_online(node)) + node = nearby_node(apicid); + } + cpu_to_node[cpu] = node; + + printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n", + cpu, c->x86_num_cores, node, cpu_core_id[cpu]); #endif - - printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n", - cpu, c->x86_num_cores, node, cpu_core_id[cpu]); #endif } @@ -909,6 +947,25 @@ static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) return 1; } +static void srat_detect_node(void) +{ +#ifdef CONFIG_NUMA + unsigned apicid, node; + int cpu = smp_processor_id(); + + /* Don't do the funky fallback heuristics the AMD version employs + for now. */ + apicid = phys_proc_id[cpu]; + node = apicid_to_node[apicid]; + if (node == NUMA_NO_NODE) + node = 0; + cpu_to_node[cpu] = node; + + if (acpi_numa > 0) + printk(KERN_INFO "CPU %d -> Node %d\n", cpu, node); +#endif +} + static void __cpuinit init_intel(struct cpuinfo_x86 *c) { /* Cache sizes */ @@ -927,9 +984,11 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) if (c->x86 >= 15) set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability); c->x86_num_cores = intel_num_cpu_cores(c); + + srat_detect_node(); } -void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) +static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) { char *v = c->x86_vendor_id; diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index 34082c1cc41e..bd33be24a386 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -36,7 +36,7 @@ struct desc_ptr idt_descr = { 256 * 16, (unsigned long) idt_table }; char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned"))); -unsigned long __supported_pte_mask = ~0UL; +unsigned long __supported_pte_mask __read_mostly = ~0UL; static int do_not_nx __initdata = 0; /* noexec=on|off @@ -94,7 +94,7 @@ void __init setup_per_cpu_areas(void) size = PERCPU_ENOUGH_ROOM; #endif - for (i = 0; i < NR_CPUS; i++) { + for_each_cpu_mask (i, cpu_possible_map) { char *ptr; if (!NODE_DATA(cpu_to_node(i))) { @@ -119,7 +119,6 @@ void pda_init(int cpu) asm volatile("movl %0,%%fs ; movl %0,%%gs" :: "r" (0)); wrmsrl(MSR_GS_BASE, cpu_pda + cpu); - pda->me = pda; pda->cpunumber = cpu; pda->irqcount = -1; pda->kernelstack = diff --git a/arch/x86_64/kernel/signal.c b/arch/x86_64/kernel/signal.c index 98590a989f3d..d642fbf3da29 100644 --- a/arch/x86_64/kernel/signal.c +++ b/arch/x86_64/kernel/signal.c @@ -394,10 +394,11 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, #endif ret = setup_rt_frame(sig, ka, info, oldset, regs); - if (ret && !(ka->sa.sa_flags & SA_NODEFER)) { + if (ret) { spin_lock_irq(¤t->sighand->siglock); sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); - sigaddset(¤t->blocked,sig); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked,sig); recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); } diff --git a/arch/x86_64/kernel/smp.c b/arch/x86_64/kernel/smp.c index e5958220d6b8..9db9dda161b4 100644 --- a/arch/x86_64/kernel/smp.c +++ b/arch/x86_64/kernel/smp.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/mm.h> -#include <linux/irq.h> #include <linux/delay.h> #include <linux/spinlock.h> #include <linux/smp_lock.h> @@ -29,6 +28,8 @@ #include <asm/proto.h> #include <asm/apicdef.h> +#define __cpuinit __init + /* * Smarter SMP flushing macros. * c/o Linus Torvalds. @@ -37,19 +38,41 @@ * writing to user space from interrupts. (Its not allowed anyway). * * Optimizations Manfred Spraul <manfred@colorfullife.com> + * + * More scalable flush, from Andi Kleen + * + * To avoid global state use 8 different call vectors. + * Each CPU uses a specific vector to trigger flushes on other + * CPUs. Depending on the received vector the target CPUs look into + * the right per cpu variable for the flush data. + * + * With more than 8 CPUs they are hashed to the 8 available + * vectors. The limited global vector space forces us to this right now. + * In future when interrupts are split into per CPU domains this could be + * fixed, at the cost of triggering multiple IPIs in some cases. */ -static cpumask_t flush_cpumask; -static struct mm_struct * flush_mm; -static unsigned long flush_va; -static DEFINE_SPINLOCK(tlbstate_lock); +union smp_flush_state { + struct { + cpumask_t flush_cpumask; + struct mm_struct *flush_mm; + unsigned long flush_va; #define FLUSH_ALL -1ULL + spinlock_t tlbstate_lock; + }; + char pad[SMP_CACHE_BYTES]; +} ____cacheline_aligned; + +/* State is put into the per CPU data section, but padded + to a full cache line because other CPUs can access it and we don't + want false sharing in the per cpu data segment. */ +static DEFINE_PER_CPU(union smp_flush_state, flush_state); /* * We cannot call mmdrop() because we are in interrupt context, * instead update mm->cpu_vm_mask. */ -static inline void leave_mm (unsigned long cpu) +static inline void leave_mm(int cpu) { if (read_pda(mmu_state) == TLBSTATE_OK) BUG(); @@ -101,15 +124,25 @@ static inline void leave_mm (unsigned long cpu) * * 1) Flush the tlb entries if the cpu uses the mm that's being flushed. * 2) Leave the mm if we are in the lazy tlb mode. + * + * Interrupts are disabled. */ -asmlinkage void smp_invalidate_interrupt (void) +asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs) { - unsigned long cpu; + int cpu; + int sender; + union smp_flush_state *f; - cpu = get_cpu(); + cpu = smp_processor_id(); + /* + * orig_rax contains the interrupt vector - 256. + * Use that to determine where the sender put the data. + */ + sender = regs->orig_rax + 256 - INVALIDATE_TLB_VECTOR_START; + f = &per_cpu(flush_state, sender); - if (!cpu_isset(cpu, flush_cpumask)) + if (!cpu_isset(cpu, f->flush_cpumask)) goto out; /* * This was a BUG() but until someone can quote me the @@ -120,64 +153,63 @@ asmlinkage void smp_invalidate_interrupt (void) * BUG(); */ - if (flush_mm == read_pda(active_mm)) { + if (f->flush_mm == read_pda(active_mm)) { if (read_pda(mmu_state) == TLBSTATE_OK) { - if (flush_va == FLUSH_ALL) + if (f->flush_va == FLUSH_ALL) local_flush_tlb(); else - __flush_tlb_one(flush_va); + __flush_tlb_one(f->flush_va); } else leave_mm(cpu); } out: ack_APIC_irq(); - cpu_clear(cpu, flush_cpumask); - put_cpu_no_resched(); + cpu_clear(cpu, f->flush_cpumask); } static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, unsigned long va) { - cpumask_t tmp; - /* - * A couple of (to be removed) sanity checks: - * - * - we do not send IPIs to not-yet booted CPUs. - * - current CPU must not be in mask - * - mask must exist :) - */ - BUG_ON(cpus_empty(cpumask)); - cpus_and(tmp, cpumask, cpu_online_map); - BUG_ON(!cpus_equal(tmp, cpumask)); - BUG_ON(cpu_isset(smp_processor_id(), cpumask)); - if (!mm) - BUG(); + int sender; + union smp_flush_state *f; - /* - * I'm not happy about this global shared spinlock in the - * MM hot path, but we'll see how contended it is. - * Temporarily this turns IRQs off, so that lockups are - * detected by the NMI watchdog. - */ - spin_lock(&tlbstate_lock); - - flush_mm = mm; - flush_va = va; - cpus_or(flush_cpumask, cpumask, flush_cpumask); + /* Caller has disabled preemption */ + sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS; + f = &per_cpu(flush_state, sender); + + /* Could avoid this lock when + num_online_cpus() <= NUM_INVALIDATE_TLB_VECTORS, but it is + probably not worth checking this for a cache-hot lock. */ + spin_lock(&f->tlbstate_lock); + + f->flush_mm = mm; + f->flush_va = va; + cpus_or(f->flush_cpumask, cpumask, f->flush_cpumask); /* * We have to send the IPI only to * CPUs affected. */ - send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR); + send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR_START + sender); + + while (!cpus_empty(f->flush_cpumask)) + cpu_relax(); - while (!cpus_empty(flush_cpumask)) - mb(); /* nothing. lockup detection does not belong here */; + f->flush_mm = NULL; + f->flush_va = 0; + spin_unlock(&f->tlbstate_lock); +} - flush_mm = NULL; - flush_va = 0; - spin_unlock(&tlbstate_lock); +int __cpuinit init_smp_flush(void) +{ + int i; + for_each_cpu_mask(i, cpu_possible_map) { + spin_lock_init(&per_cpu(flush_state.tlbstate_lock, i)); + } + return 0; } + +core_initcall(init_smp_flush); void flush_tlb_current_task(void) { @@ -295,8 +327,11 @@ void unlock_ipi_call_lock(void) /* * this function sends a 'generic call function' IPI to one other CPU * in the system. + * + * cpu is a standard Linux logical CPU number. */ -static void __smp_call_function_single (int cpu, void (*func) (void *info), void *info, +static void +__smp_call_function_single(int cpu, void (*func) (void *info), void *info, int nonatomic, int wait) { struct call_data_struct data; diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index fa25e39fe54d..e12d7baeb33e 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -44,7 +44,6 @@ #include <linux/mm.h> #include <linux/kernel_stat.h> #include <linux/smp_lock.h> -#include <linux/irq.h> #include <linux/bootmem.h> #include <linux/thread_info.h> #include <linux/module.h> @@ -58,17 +57,19 @@ #include <asm/tlbflush.h> #include <asm/proto.h> #include <asm/nmi.h> +#include <asm/irq.h> +#include <asm/hw_irq.h> /* Number of siblings per CPU package */ int smp_num_siblings = 1; /* Package ID of each logical CPU */ -u8 phys_proc_id[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; -u8 cpu_core_id[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; +u8 phys_proc_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; +u8 cpu_core_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; EXPORT_SYMBOL(phys_proc_id); EXPORT_SYMBOL(cpu_core_id); /* Bitmask of currently online CPUs */ -cpumask_t cpu_online_map; +cpumask_t cpu_online_map __read_mostly; EXPORT_SYMBOL(cpu_online_map); @@ -88,8 +89,8 @@ struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned; /* Set when the idlers are all forked */ int smp_threads_ready; -cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned; -cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned; +cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly; +cpumask_t cpu_core_map[NR_CPUS] __read_mostly; EXPORT_SYMBOL(cpu_core_map); /* @@ -413,8 +414,13 @@ void __cpuinit smp_callin(void) /* * Get our bogomips. + * + * Need to enable IRQs because it can take longer and then + * the NMI watchdog might kill us. */ + local_irq_enable(); calibrate_delay(); + local_irq_disable(); Dprintk("Stack at about %p\n",&cpuid); disable_APIC_timer(); @@ -540,8 +546,8 @@ static void inquire_remote_apic(int apicid) */ apic_wait_icr_idle(); - apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); - apic_write_around(APIC_ICR, APIC_DM_REMRD | regs[i]); + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); + apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]); timeout = 0; do { @@ -574,12 +580,12 @@ static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int sta /* * Turn INIT on target chip */ - apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); /* * Send IPI */ - apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT + apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT); Dprintk("Waiting for send to finish...\n"); @@ -595,10 +601,10 @@ static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int sta Dprintk("Deasserting INIT.\n"); /* Target chip */ - apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); /* Send IPI */ - apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT); + apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT); Dprintk("Waiting for send to finish...\n"); timeout = 0; @@ -610,16 +616,7 @@ static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int sta atomic_set(&init_deasserted, 1); - /* - * Should we send STARTUP IPIs ? - * - * Determine this based on the APIC version. - * If we don't have an integrated APIC, don't send the STARTUP IPIs. - */ - if (APIC_INTEGRATED(apic_version[phys_apicid])) - num_starts = 2; - else - num_starts = 0; + num_starts = 2; /* * Run STARTUP IPI loop. @@ -640,12 +637,11 @@ static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int sta */ /* Target chip */ - apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); /* Boot on the stack */ /* Kick the second */ - apic_write_around(APIC_ICR, APIC_DM_STARTUP - | (start_rip >> 12)); + apic_write(APIC_ICR, APIC_DM_STARTUP | (start_rip >> 12)); /* * Give the other CPU some time to accept the IPI. @@ -864,17 +860,6 @@ static __cpuinit void smp_cleanup_boot(void) * Reset trampoline flag */ *((volatile int *) phys_to_virt(0x467)) = 0; - -#ifndef CONFIG_HOTPLUG_CPU - /* - * Free pages reserved for SMP bootup. - * When you add hotplug CPU support later remove this - * Note there is more work to be done for later CPU bootup. - */ - - free_page((unsigned long) __va(PAGE_SIZE)); - free_page((unsigned long) __va(SMP_TRAMPOLINE_BASE)); -#endif } /* @@ -894,23 +879,6 @@ static __init void disable_smp(void) cpu_set(0, cpu_core_map[0]); } -/* - * Handle user cpus=... parameter. - */ -static __init void enforce_max_cpus(unsigned max_cpus) -{ - int i, k; - k = 0; - for (i = 0; i < NR_CPUS; i++) { - if (!cpu_possible(i)) - continue; - if (++k > max_cpus) { - cpu_clear(i, cpu_possible_map); - cpu_clear(i, cpu_present_map); - } - } -} - #ifdef CONFIG_HOTPLUG_CPU /* * cpu_possible_map should be static, it cannot change as cpu's @@ -999,8 +967,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) current_cpu_data = boot_cpu_data; current_thread_info()->cpu = 0; /* needed? */ - enforce_max_cpus(max_cpus); - #ifdef CONFIG_HOTPLUG_CPU prefill_possible_map(); #endif diff --git a/arch/x86_64/kernel/suspend.c b/arch/x86_64/kernel/suspend.c index 0612640d91b1..ebb9abf3ce6d 100644 --- a/arch/x86_64/kernel/suspend.c +++ b/arch/x86_64/kernel/suspend.c @@ -8,23 +8,8 @@ */ #include <linux/config.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/spinlock.h> -#include <linux/poll.h> -#include <linux/delay.h> -#include <linux/sysrq.h> -#include <linux/proc_fs.h> -#include <linux/irq.h> -#include <linux/pm.h> -#include <linux/device.h> +#include <linux/smp.h> #include <linux/suspend.h> -#include <asm/uaccess.h> -#include <asm/acpi.h> -#include <asm/tlbflush.h> -#include <asm/io.h> #include <asm/proto.h> struct saved_context saved_context; diff --git a/arch/x86_64/kernel/suspend_asm.S b/arch/x86_64/kernel/suspend_asm.S index 53f8e1659511..4d659e97df10 100644 --- a/arch/x86_64/kernel/suspend_asm.S +++ b/arch/x86_64/kernel/suspend_asm.S @@ -14,7 +14,7 @@ #include <linux/linkage.h> #include <asm/segment.h> #include <asm/page.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> ENTRY(swsusp_arch_suspend) diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 66bf6ddeb0c3..2373cb8b8625 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -18,7 +18,6 @@ #include <linux/interrupt.h> #include <linux/init.h> #include <linux/mc146818rtc.h> -#include <linux/irq.h> #include <linux/time.h> #include <linux/ioport.h> #include <linux/module.h> @@ -176,10 +175,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); @@ -471,7 +467,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * off) isn't likely to go away much sooner anyway. */ - if ((~time_status & STA_UNSYNC) && xtime.tv_sec > rtc_update && + if (ntp_synced() && xtime.tv_sec > rtc_update && abs(xtime.tv_nsec - 500000000) <= tick_nsec / 2) { set_rtc_mmss(xtime.tv_sec); rtc_update = xtime.tv_sec + 660; @@ -940,7 +936,6 @@ void __init time_init(void) vxtime.mode = VXTIME_TSC; vxtime.quot = (1000000L << 32) / vxtime_hz; vxtime.tsc_quot = (1000L << 32) / cpu_khz; - vxtime.hz = vxtime_hz; rdtscll_sync(&vxtime.last_tsc); setup_irq(0, &irq0); @@ -1041,6 +1036,7 @@ static int timer_resume(struct sys_device *dev) write_sequnlock_irqrestore(&xtime_lock,flags); jiffies += sleep_length; wall_jiffies += sleep_length; + touch_softlockup_watchdog(); return 0; } diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c index 6ead433a3885..b5e09e6b5536 100644 --- a/arch/x86_64/kernel/traps.c +++ b/arch/x86_64/kernel/traps.c @@ -29,6 +29,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/nmi.h> +#include <linux/kprobes.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -46,9 +47,6 @@ #include <asm/proto.h> #include <asm/nmi.h> -#include <linux/irq.h> - - extern struct gate_struct idt_table[256]; asmlinkage void divide_error(void); @@ -323,13 +321,13 @@ void handle_BUG(struct pt_regs *regs) if (__copy_from_user(&f, (struct bug_frame *) regs->rip, sizeof(struct bug_frame))) return; - if ((unsigned long)f.filename < __PAGE_OFFSET || + if (f.filename >= 0 || f.ud2[0] != 0x0f || f.ud2[1] != 0x0b) return; - if (__get_user(tmp, f.filename)) - f.filename = "unmapped filename"; + if (__get_user(tmp, (char *)(long)f.filename)) + f.filename = (int)(long)"unmapped filename"; printk("----------- [cut here ] --------- [please bite here ] ---------\n"); - printk(KERN_ALERT "Kernel BUG at %.50s:%d\n", f.filename, f.line); + printk(KERN_ALERT "Kernel BUG at %.50s:%d\n", (char *)(long)f.filename, f.line); } #ifdef CONFIG_BUG @@ -342,30 +340,33 @@ void out_of_line_bug(void) static DEFINE_SPINLOCK(die_lock); static int die_owner = -1; -void oops_begin(void) +unsigned long oops_begin(void) { - int cpu = safe_smp_processor_id(); - /* racy, but better than risking deadlock. */ - local_irq_disable(); + int cpu = safe_smp_processor_id(); + unsigned long flags; + + /* racy, but better than risking deadlock. */ + local_irq_save(flags); if (!spin_trylock(&die_lock)) { if (cpu == die_owner) /* nested oops. should stop eventually */; else - spin_lock(&die_lock); + spin_lock(&die_lock); } - die_owner = cpu; + die_owner = cpu; console_verbose(); - bust_spinlocks(1); + bust_spinlocks(1); + return flags; } -void oops_end(void) +void oops_end(unsigned long flags) { die_owner = -1; - bust_spinlocks(0); - spin_unlock(&die_lock); + bust_spinlocks(0); + spin_unlock_irqrestore(&die_lock, flags); if (panic_on_oops) - panic("Oops"); -} + panic("Oops"); +} void __die(const char * str, struct pt_regs * regs, long err) { @@ -391,10 +392,11 @@ void __die(const char * str, struct pt_regs * regs, long err) void die(const char * str, struct pt_regs * regs, long err) { - oops_begin(); + unsigned long flags = oops_begin(); + handle_BUG(regs); __die(str, regs, err); - oops_end(); + oops_end(flags); do_exit(SIGSEGV); } static inline void die_if_kernel(const char * str, struct pt_regs * regs, long err) @@ -405,7 +407,8 @@ static inline void die_if_kernel(const char * str, struct pt_regs * regs, long e void die_nmi(char *str, struct pt_regs *regs) { - oops_begin(); + unsigned long flags = oops_begin(); + /* * We are in trouble anyway, lets at least try * to get a message out. @@ -415,12 +418,13 @@ void die_nmi(char *str, struct pt_regs *regs) if (panic_on_timeout || panic_on_oops) panic("nmi watchdog"); printk("console shuts up ...\n"); - oops_end(); + oops_end(flags); do_exit(SIGSEGV); } -static void do_trap(int trapnr, int signr, char *str, - struct pt_regs * regs, long error_code, siginfo_t *info) +static void __kprobes do_trap(int trapnr, int signr, char *str, + struct pt_regs * regs, long error_code, + siginfo_t *info) { conditional_sti(regs); @@ -504,7 +508,8 @@ DO_ERROR(18, SIGSEGV, "reserved", reserved) DO_ERROR(12, SIGBUS, "stack segment", stack_segment) DO_ERROR( 8, SIGSEGV, "double fault", double_fault) -asmlinkage void do_general_protection(struct pt_regs * regs, long error_code) +asmlinkage void __kprobes do_general_protection(struct pt_regs * regs, + long error_code) { conditional_sti(regs); @@ -622,7 +627,7 @@ asmlinkage void default_do_nmi(struct pt_regs *regs) io_check_error(reason, regs); } -asmlinkage void do_int3(struct pt_regs * regs, long error_code) +asmlinkage void __kprobes do_int3(struct pt_regs * regs, long error_code) { if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) == NOTIFY_STOP) { return; @@ -653,7 +658,8 @@ asmlinkage struct pt_regs *sync_regs(struct pt_regs *eregs) } /* runs on IST stack. */ -asmlinkage void do_debug(struct pt_regs * regs, unsigned long error_code) +asmlinkage void __kprobes do_debug(struct pt_regs * regs, + unsigned long error_code) { unsigned long condition; struct task_struct *tsk = current; @@ -786,13 +792,16 @@ asmlinkage void do_coprocessor_error(struct pt_regs *regs) */ cwd = get_fpu_cwd(task); swd = get_fpu_swd(task); - switch (((~cwd) & swd & 0x3f) | (swd & 0x240)) { + switch (swd & ~cwd & 0x3f) { case 0x000: default: break; case 0x001: /* Invalid Op */ - case 0x041: /* Stack Fault */ - case 0x241: /* Stack Fault | Direction */ + /* + * swd & 0x240 == 0x040: Stack Underflow + * swd & 0x240 == 0x240: Stack Overflow + * User must clear the SF bit (0x40) if set + */ info.si_code = FPE_FLTINV; break; case 0x002: /* Denormalize */ diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S index 2a94f9b60b2d..6dd642cad2ef 100644 --- a/arch/x86_64/kernel/vmlinux.lds.S +++ b/arch/x86_64/kernel/vmlinux.lds.S @@ -21,6 +21,7 @@ SECTIONS *(.text) SCHED_TEXT LOCK_TEXT + KPROBES_TEXT *(.fixup) *(.gnu.warning) } = 0x9090 @@ -193,20 +194,7 @@ SECTIONS #endif } - /* DWARF 2 */ - .debug_info 0 : { *(.debug_info) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - /* SGI/MIPS DWARF 2 extensions */ - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } - - - .comment 0 : { *(.comment) } + STABS_DEBUG + + DWARF_DEBUG } diff --git a/arch/x86_64/kernel/vsyscall.c b/arch/x86_64/kernel/vsyscall.c index 2e5734425949..70a0bd16085f 100644 --- a/arch/x86_64/kernel/vsyscall.c +++ b/arch/x86_64/kernel/vsyscall.c @@ -107,7 +107,7 @@ static force_inline long time_syscall(long *t) return secs; } -static int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz) +int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz) { if (unlikely(!__sysctl_vsyscall)) return gettimeofday(tv,tz); @@ -120,7 +120,7 @@ static int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz /* This will break when the xtime seconds get inaccurate, but that is * unlikely */ -static time_t __vsyscall(1) vtime(time_t *t) +time_t __vsyscall(1) vtime(time_t *t) { if (unlikely(!__sysctl_vsyscall)) return time_syscall(t); @@ -129,12 +129,12 @@ static time_t __vsyscall(1) vtime(time_t *t) return __xtime.tv_sec; } -static long __vsyscall(2) venosys_0(void) +long __vsyscall(2) venosys_0(void) { return -ENOSYS; } -static long __vsyscall(3) venosys_1(void) +long __vsyscall(3) venosys_1(void) { return -ENOSYS; } diff --git a/arch/x86_64/lib/copy_user.S b/arch/x86_64/lib/copy_user.S index bd556c804248..dfa358b05c89 100644 --- a/arch/x86_64/lib/copy_user.S +++ b/arch/x86_64/lib/copy_user.S @@ -7,7 +7,7 @@ #define FIX_ALIGNMENT 1 #include <asm/current.h> - #include <asm/offset.h> + #include <asm/asm-offsets.h> #include <asm/thread_info.h> #include <asm/cpufeature.h> diff --git a/arch/x86_64/lib/getuser.S b/arch/x86_64/lib/getuser.S index f80bafee8669..3844d5e885a4 100644 --- a/arch/x86_64/lib/getuser.S +++ b/arch/x86_64/lib/getuser.S @@ -29,7 +29,7 @@ #include <linux/linkage.h> #include <asm/page.h> #include <asm/errno.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> #include <asm/thread_info.h> .text diff --git a/arch/x86_64/lib/putuser.S b/arch/x86_64/lib/putuser.S index 5828b8191667..7f5593974e2d 100644 --- a/arch/x86_64/lib/putuser.S +++ b/arch/x86_64/lib/putuser.S @@ -27,7 +27,7 @@ #include <linux/linkage.h> #include <asm/page.h> #include <asm/errno.h> -#include <asm/offset.h> +#include <asm/asm-offsets.h> #include <asm/thread_info.h> .text diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c index ca914c3bd49c..b75b872ec154 100644 --- a/arch/x86_64/mm/fault.c +++ b/arch/x86_64/mm/fault.c @@ -23,6 +23,7 @@ #include <linux/vt_kern.h> /* For unblank_screen() */ #include <linux/compiler.h> #include <linux/module.h> +#include <linux/kprobes.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -220,12 +221,13 @@ int unhandled_signal(struct task_struct *tsk, int sig) static noinline void pgtable_bad(unsigned long address, struct pt_regs *regs, unsigned long error_code) { - oops_begin(); + unsigned long flags = oops_begin(); + printk(KERN_ALERT "%s: Corrupted page table at address %lx\n", current->comm, address); dump_pagetable(address); __die("Bad pagetable", regs, error_code); - oops_end(); + oops_end(flags); do_exit(SIGKILL); } @@ -294,7 +296,8 @@ int exception_trace = 1; * bit 2 == 0 means kernel, 1 means user-mode * bit 3 == 1 means fault was an instruction fetch */ -asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code) +asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, + unsigned long error_code) { struct task_struct *tsk; struct mm_struct *mm; @@ -302,6 +305,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code) unsigned long address; const struct exception_table_entry *fixup; int write; + unsigned long flags; siginfo_t info; #ifdef CONFIG_CHECKING @@ -519,7 +523,7 @@ no_context: * terminate things with extreme prejudice. */ - oops_begin(); + flags = oops_begin(); if (address < PAGE_SIZE) printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); @@ -532,7 +536,7 @@ no_context: __die("Oops", regs, error_code); /* Executive summary in case the body of the oops scrolled away */ printk(KERN_EMERG "CR2: %016lx\n", address); - oops_end(); + oops_end(flags); do_exit(SIGKILL); /* diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c index aa4a5189ecee..e60a1a848de8 100644 --- a/arch/x86_64/mm/init.c +++ b/arch/x86_64/mm/init.c @@ -57,31 +57,31 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); void show_mem(void) { - int i, total = 0, reserved = 0; - int shared = 0, cached = 0; + long i, total = 0, reserved = 0; + long shared = 0, cached = 0; pg_data_t *pgdat; struct page *page; - printk("Mem-info:\n"); + printk(KERN_INFO "Mem-info:\n"); show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); + printk(KERN_INFO "Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); for_each_pgdat(pgdat) { for (i = 0; i < pgdat->node_spanned_pages; ++i) { page = pfn_to_page(pgdat->node_start_pfn + i); total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; + if (PageReserved(page)) + reserved++; + else if (PageSwapCache(page)) + cached++; + else if (page_count(page)) + shared += page_count(page) - 1; } } - printk("%d pages of RAM\n", total); - printk("%d reserved pages\n",reserved); - printk("%d pages shared\n",shared); - printk("%d pages swap cached\n",cached); + printk(KERN_INFO "%lu pages of RAM\n", total); + printk(KERN_INFO "%lu reserved pages\n",reserved); + printk(KERN_INFO "%lu pages shared\n",shared); + printk(KERN_INFO "%lu pages swap cached\n",cached); } /* References to section boundaries */ @@ -381,41 +381,14 @@ void __init clear_kernel_mapping(unsigned long address, unsigned long size) __flush_tlb_all(); } -static inline int page_is_ram (unsigned long pagenr) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - unsigned long addr, end; - - if (e820.map[i].type != E820_RAM) /* not usable memory */ - continue; - /* - * !!!FIXME!!! Some BIOSen report areas as RAM that - * are not. Notably the 640->1Mb area. We need a sanity - * check here. - */ - addr = (e820.map[i].addr+PAGE_SIZE-1) >> PAGE_SHIFT; - end = (e820.map[i].addr+e820.map[i].size) >> PAGE_SHIFT; - if ((pagenr >= addr) && (pagenr < end)) - return 1; - } - return 0; -} - -extern int swiotlb_force; - static struct kcore_list kcore_mem, kcore_vmalloc, kcore_kernel, kcore_modules, kcore_vsyscall; void __init mem_init(void) { - int codesize, reservedpages, datasize, initsize; - int tmp; + long codesize, reservedpages, datasize, initsize; #ifdef CONFIG_SWIOTLB - if (swiotlb_force) - swiotlb = 1; if (!iommu_aperture && (end_pfn >= 0xffffffff>>PAGE_SHIFT || force_iommu)) swiotlb = 1; @@ -436,25 +409,11 @@ void __init mem_init(void) /* this will put all low memory onto the freelists */ #ifdef CONFIG_NUMA - totalram_pages += numa_free_all_bootmem(); - tmp = 0; - /* should count reserved pages here for all nodes */ + totalram_pages = numa_free_all_bootmem(); #else - -#ifdef CONFIG_FLATMEM - max_mapnr = end_pfn; - if (!mem_map) BUG(); -#endif - - totalram_pages += free_all_bootmem(); - - for (tmp = 0; tmp < end_pfn; tmp++) - /* - * Only count reserved RAM pages - */ - if (page_is_ram(tmp) && PageReserved(pfn_to_page(tmp))) - reservedpages++; + totalram_pages = free_all_bootmem(); #endif + reservedpages = end_pfn - totalram_pages - e820_hole_size(0, end_pfn); after_bootmem = 1; @@ -471,7 +430,7 @@ void __init mem_init(void) kclist_add(&kcore_vsyscall, (void *)VSYSCALL_START, VSYSCALL_END - VSYSCALL_START); - printk("Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n", + printk("Memory: %luk/%luk available (%ldk kernel code, %ldk reserved, %ldk data, %ldk init)\n", (unsigned long) nr_free_pages() << (PAGE_SHIFT-10), end_pfn << (PAGE_SHIFT-10), codesize >> 10, diff --git a/arch/x86_64/mm/k8topology.c b/arch/x86_64/mm/k8topology.c index ec35747aacd7..65417b040c1b 100644 --- a/arch/x86_64/mm/k8topology.c +++ b/arch/x86_64/mm/k8topology.c @@ -45,10 +45,12 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end) unsigned long prevbase; struct node nodes[8]; int nodeid, i, nb; + unsigned char nodeids[8]; int found = 0; u32 reg; unsigned numnodes; nodemask_t nodes_parsed; + unsigned dualcore = 0; nodes_clear(nodes_parsed); @@ -67,11 +69,15 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end) prevbase = 0; for (i = 0; i < 8; i++) { unsigned long base,limit; - + u32 nodeid; + + /* Undefined before E stepping, but hopefully 0 */ + dualcore |= ((read_pci_config(0, nb, 3, 0xe8) >> 12) & 3) == 1; base = read_pci_config(0, nb, 1, 0x40 + i*8); limit = read_pci_config(0, nb, 1, 0x44 + i*8); nodeid = limit & 7; + nodeids[i] = nodeid; if ((base & 3) == 0) { if (i < numnodes) printk("Skipping disabled node %d\n", i); @@ -157,8 +163,9 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end) for (i = 0; i < 8; i++) { if (nodes[i].start != nodes[i].end) { - /* assume 1:1 NODE:CPU */ - cpu_to_node[i] = i; + nodeid = nodeids[i]; + apicid_to_node[nodeid << dualcore] = i; + apicid_to_node[(nodeid << dualcore) + dualcore] = i; setup_node_bootmem(i, nodes[i].start, nodes[i].end); } } diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index 6a156f5692ae..80a49d9bd8a7 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -22,14 +22,19 @@ #define Dprintk(x...) #endif -struct pglist_data *node_data[MAX_NUMNODES]; +struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; bootmem_data_t plat_node_bdata[MAX_NUMNODES]; int memnode_shift; u8 memnodemap[NODEMAPSIZE]; -unsigned char cpu_to_node[NR_CPUS] = { [0 ... NR_CPUS-1] = NUMA_NO_NODE }; -cpumask_t node_to_cpumask[MAX_NUMNODES]; +unsigned char cpu_to_node[NR_CPUS] __read_mostly = { + [0 ... NR_CPUS-1] = NUMA_NO_NODE +}; +unsigned char apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = { + [0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE +}; +cpumask_t node_to_cpumask[MAX_NUMNODES] __read_mostly; int numa_off __initdata; diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c index 8e3d097a9ddd..4b2e844c15a7 100644 --- a/arch/x86_64/mm/srat.c +++ b/arch/x86_64/mm/srat.c @@ -20,14 +20,20 @@ static struct acpi_table_slit *acpi_slit; -/* Internal processor count */ -static unsigned int __initdata num_processors = 0; - static nodemask_t nodes_parsed __initdata; static nodemask_t nodes_found __initdata; static struct node nodes[MAX_NUMNODES] __initdata; static __u8 pxm2node[256] = { [0 ... 255] = 0xff }; +static int node_to_pxm(int n); + +int pxm_to_node(int pxm) +{ + if ((unsigned)pxm >= 256) + return 0; + return pxm2node[pxm]; +} + static __init int setup_node(int pxm) { unsigned node = pxm2node[pxm]; @@ -44,14 +50,14 @@ static __init int setup_node(int pxm) static __init int conflicting_nodes(unsigned long start, unsigned long end) { int i; - for_each_online_node(i) { + for_each_node_mask(i, nodes_parsed) { struct node *nd = &nodes[i]; if (nd->start == nd->end) continue; if (nd->end > start && nd->start < end) - return 1; + return i; if (nd->end == end && nd->start == start) - return 1; + return i; } return -1; } @@ -75,8 +81,11 @@ static __init void cutoff_node(int i, unsigned long start, unsigned long end) static __init void bad_srat(void) { + int i; printk(KERN_ERR "SRAT: SRAT not used.\n"); acpi_numa = -1; + for (i = 0; i < MAX_LOCAL_APIC; i++) + apicid_to_node[i] = NUMA_NO_NODE; } static __init inline int srat_disabled(void) @@ -104,18 +113,10 @@ acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa) bad_srat(); return; } - if (num_processors >= NR_CPUS) { - printk(KERN_ERR "SRAT: Processor #%d (lapic %u) INVALID. (Max ID: %d).\n", - num_processors, pa->apic_id, NR_CPUS); - bad_srat(); - return; - } - cpu_to_node[num_processors] = node; + apicid_to_node[pa->apic_id] = node; acpi_numa = 1; - printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> CPU %u -> Node %u\n", - pxm, pa->apic_id, num_processors, node); - - num_processors++; + printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n", + pxm, pa->apic_id, node); } /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */ @@ -143,10 +144,15 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) printk(KERN_INFO "SRAT: hot plug zone found %lx - %lx \n", start, end); i = conflicting_nodes(start, end); - if (i >= 0) { + if (i == node) { + printk(KERN_WARNING + "SRAT: Warning: PXM %d (%lx-%lx) overlaps with itself (%Lx-%Lx)\n", + pxm, start, end, nodes[i].start, nodes[i].end); + } else if (i >= 0) { printk(KERN_ERR - "SRAT: pxm %d overlap %lx-%lx with node %d(%Lx-%Lx)\n", - pxm, start, end, i, nodes[i].start, nodes[i].end); + "SRAT: PXM %d (%lx-%lx) overlaps with PXM %d (%Lx-%Lx)\n", + pxm, start, end, node_to_pxm(i), + nodes[i].start, nodes[i].end); bad_srat(); return; } @@ -174,6 +180,14 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) int i; if (acpi_numa <= 0) return -1; + + /* First clean up the node list */ + for_each_node_mask(i, nodes_parsed) { + cutoff_node(i, start, end); + if (nodes[i].start == nodes[i].end) + node_clear(i, nodes_parsed); + } + memnode_shift = compute_hash_shift(nodes, nodes_weight(nodes_parsed)); if (memnode_shift < 0) { printk(KERN_ERR @@ -181,16 +195,10 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) bad_srat(); return -1; } - for (i = 0; i < MAX_NUMNODES; i++) { - if (!node_isset(i, nodes_parsed)) - continue; - cutoff_node(i, start, end); - if (nodes[i].start == nodes[i].end) { - node_clear(i, nodes_parsed); - continue; - } + + /* Finally register nodes */ + for_each_node_mask(i, nodes_parsed) setup_node_bootmem(i, nodes[i].start, nodes[i].end); - } for (i = 0; i < NR_CPUS; i++) { if (cpu_to_node[i] == NUMA_NO_NODE) continue; @@ -201,7 +209,7 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) return 0; } -int node_to_pxm(int n) +static int node_to_pxm(int n) { int i; if (pxm2node[n] == n) diff --git a/arch/x86_64/pci/Makefile b/arch/x86_64/pci/Makefile index 37c92e841dec..bb34e5ef916c 100644 --- a/arch/x86_64/pci/Makefile +++ b/arch/x86_64/pci/Makefile @@ -8,7 +8,7 @@ CFLAGS += -Iarch/i386/pci obj-y := i386.o obj-$(CONFIG_PCI_DIRECT)+= direct.o obj-y += fixup.o -obj-$(CONFIG_ACPI_PCI) += acpi.o +obj-$(CONFIG_ACPI) += acpi.o obj-y += legacy.o irq.o common.o # mmconfig has a 64bit special obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o diff --git a/arch/x86_64/pci/Makefile-BUS b/arch/x86_64/pci/Makefile-BUS index 291985f0d2e4..4f0c05abd408 100644 --- a/arch/x86_64/pci/Makefile-BUS +++ b/arch/x86_64/pci/Makefile-BUS @@ -8,7 +8,7 @@ CFLAGS += -I arch/i386/pci obj-y := i386.o obj-$(CONFIG_PCI_DIRECT)+= direct.o obj-y += fixup.o -obj-$(CONFIG_ACPI_PCI) += acpi.o +obj-$(CONFIG_ACPI) += acpi.o obj-y += legacy.o irq.o common.o # mmconfig has a 64bit special obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o diff --git a/arch/x86_64/pci/k8-bus.c b/arch/x86_64/pci/k8-bus.c index d80c323669e0..3acf60ded2a0 100644 --- a/arch/x86_64/pci/k8-bus.c +++ b/arch/x86_64/pci/k8-bus.c @@ -58,10 +58,16 @@ fill_mp_bus_to_cpumask(void) for (j = SECONDARY_LDT_BUS_NUMBER(ldtbus); j <= SUBORDINATE_LDT_BUS_NUMBER(ldtbus); j++) { - int node = NODE_ID(nid); + struct pci_bus *bus; + long node = NODE_ID(nid); + /* Algorithm a bit dumb, but + it shouldn't matter here */ + bus = pci_find_bus(0, j); + if (!bus) + continue; if (!node_online(node)) node = 0; - pci_bus_to_node[j] = node; + bus->sysdata = (void *)node; } } } diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index 657e88aa0902..a0838c4a94e4 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -111,13 +111,6 @@ static int __init pci_mmcfg_init(void) (pci_mmcfg_config[0].base_address == 0)) return 0; - /* Kludge for now. Don't use mmconfig on AMD systems because - those have some busses where mmconfig doesn't work, - and we don't parse ACPI MCFG well enough to handle that. - Remove when proper handling is added. */ - if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) - return 0; - /* RED-PEN i386 doesn't do _nocache right now */ pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL); if (pci_mmcfg_virt == NULL) { diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile index 27847e4ffcbf..98fac8489aed 100644 --- a/arch/xtensa/Makefile +++ b/arch/xtensa/Makefile @@ -66,13 +66,7 @@ boot := arch/xtensa/boot archinc := include/asm-xtensa -arch/xtensa/kernel/asm-offsets.s: \ - arch/xtensa/kernel/asm-offsets.c $(archinc)/.platform - -include/asm-xtensa/offsets.h: arch/xtensa/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) - -prepare: $(archinc)/.platform $(archinc)/offsets.h +archprepare: $(archinc)/.platform # Update machine cpu and platform symlinks if something which affects # them changed. @@ -94,7 +88,7 @@ bzImage : zImage zImage zImage.initrd: vmlinux $(Q)$(MAKE) $(build)=$(boot) $@ -CLEAN_FILES += arch/xtensa/vmlinux.lds $(archinc)/offset.h \ +CLEAN_FILES += arch/xtensa/vmlinux.lds \ $(archinc)/platform $(archinc)/xtensa/config \ $(archinc)/.platform diff --git a/arch/xtensa/kernel/align.S b/arch/xtensa/kernel/align.S index 74b1e90ef08c..a4956578a24d 100644 --- a/arch/xtensa/kernel/align.S +++ b/arch/xtensa/kernel/align.S @@ -19,7 +19,7 @@ #include <asm/ptrace.h> #include <asm/ptrace.h> #include <asm/current.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/pgtable.h> #include <asm/processor.h> #include <asm/page.h> diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index c64a01f71de6..5c018c503dfa 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -14,7 +14,7 @@ */ #include <linux/linkage.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/processor.h> #include <asm/thread_info.h> #include <asm/uaccess.h> diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index 4099703b14be..c83bb0d41787 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -43,7 +43,7 @@ #include <asm/mmu.h> #include <asm/irq.h> #include <asm/atomic.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/coprocessor.h> extern void ret_from_fork(void); diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c index df6e1e17b096..dc42cede9394 100644 --- a/arch/xtensa/kernel/signal.c +++ b/arch/xtensa/kernel/signal.c @@ -702,12 +702,11 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) if (ka.sa.sa_flags & SA_ONESHOT) ka.sa.sa_handler = SIG_DFL; - if (!(ka.sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked, ¤t->blocked, &ka.sa.sa_mask); + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked, ¤t->blocked, &ka.sa.sa_mask); + if (!(ka.sa.sa_flags & SA_NODEFER)) sigaddset(¤t->blocked, signr); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); return 1; } diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index e07287db5a40..1ac7d5ce7456 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -122,10 +122,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); return 0; } @@ -184,7 +181,7 @@ again: next += CCOUNT_PER_JIFFY; do_timer (regs); /* Linux handler in kernel/timer.c */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec - last_rtc_update >= 659 && abs((xtime.tv_nsec/1000)-(1000000-1000000/HZ))<5000000/HZ && jiffies - wall_jiffies == 1) { diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S index 81808f0c6742..0e74397bfa2b 100644 --- a/arch/xtensa/kernel/vectors.S +++ b/arch/xtensa/kernel/vectors.S @@ -46,7 +46,7 @@ #include <asm/ptrace.h> #include <asm/ptrace.h> #include <asm/current.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/pgtable.h> #include <asm/processor.h> #include <asm/page.h> |